| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 98D07203005208 | REAR FRAME | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 956A7314G02 | SET, LIFTING BRACKET, TURBINE REAR FRAME (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 956A7314G05 | SET, LIFTING BRACKET, TURBINE REAR FRAME (CALIBRATION) (CALIBRATION) | 1 | |
| 10C1022G01 | Adapter Set Assembly Pedestal-Compressor Rear Frame | 1 | |
| 10C1189 | FIXTURE - GUIDE-TURBINE REAR FRAME HORIZONTAL | 1 | |
| 10C1195 | FIXTURE - LIFT-TURBINE REAR FRAME | 1 | |
| 10RS.08 | N°4 BANJO REAR SPARE FRAME | 2 | |
| 10RS_08 | N°4 BANJO REAR SPARE FRAME | 2 | |
| 11C3277 | FIXTURE - RESTRAIN-LP TURB ROTOR/TURB REAR FRAME | 1 | |
| 11C3467 | FIXTURE - GUIDE- TURBINE REAR FRAME- VERTICAL | 1 | |
| 11C3468 | PEDESTAL, ASSY - TURB REAR FRAME | 1 | |
| 11C3547 | CLOSURE SET - LEAK TEST - TURBINE REAR FRAME (CLOSURE SET) | 1 | |
| 11C3547G02 | Closure Set.Leak Test Turbine Rear Frame | 1 | |
| 11C4293P01 | COVER, PROTECTIVE TURBINE REAR FRAME | 1 | |
| 11C4383 | FIXTURE - LIFT-TURB REAR FRAME - HORIZONTAL | 1 | |
| 11C4677 | CONTAINER - SHIPPING - TURB REAR FRAME | 1 | |
| 144-955-000-702 | ACCELEROMETER COMPRESSOR REAR FRAME | 2 | |
| 1C6802 | TOOL, PILOT & GUIDE-TURB REAR FRAME | 1 | |
| 1C6802G01 | Tool pilot&guide-turb rear frame | 1 | |
| 1C6839G02 | Bracket Set,Sub Assy Stand-Turb Rear Frame | 1 | |
| 1C6896G01 | Fixture,holding-lptr to turbine rear frame | 1 | |
| 1C8333G01 | JACK ASSEMBLY, SUPPORT COMPRESSOR REAR FRAME | 1 | |
| 1C9324G02 | Bracket Assy - Turb Rear Frame | 1 | |
| 1C9373G01 | ADAPTER SET - PEDESTAL TURBINE, REAR FRAME | 1 | |
| 1C9376G01 | JACK ASSEMBLY, SUPPORT COMPRESSOR REAR FRAME | 1 | |
| 1C9419G03 | Jack Assy Support-Comp Rear Frame | 1 | |
| 1C9429 | TOOL SET, REMOVE- COMPR REAR FRAME AFT CASE | 1 | |
| 1C9448 | JACK ASSY, SUPPORT-COMPRESSOR REAR FRAME | 1 | |
| 1C9448G01 | Jack Assy, Supportcompressor Rear Frame | 1 | |
| 1C9614G01 | Bracket assy-turbine rear frame | 1 | |
| 1C9614G02 | Bracket assy-turbine rear frame | 1 | |
| 247C5250 | TOOL SET, REMOVE-COMPR REAR FRAME AFT CASE | 1 | |
| 247C5250G01 | Tool Set, Remove -Compr Rear Frame Aft Case | 1 | |
| 2C14133G03 | LPT REAR FRAME GUIDE | 2 | |
| 2C14133G3 | GUIDE,LPT REAR FRAME | 1 | |
| 2C14178 | ADAPTER, PEDESTAL COMPR REAR FRAME AFT FLANGE | 1 | |
| 2C14178 REV A | ADAPTER, PEDESTAL COMPR REAR FRAME AFT FLANGE | 1 | |
| 2C14178G01 | ADAPTER SET -PIEDESTAL-COMP REAR FRAME | 2 | |
| 2C14201G01 | PEDESTAL SET - COMPRESSOR REAR FRAME | 1 | |
| 2C14203 | ADAPTER SET, PEDESTAL-COMPR. REAR FRAME | 1 | |
| 2C14203 REV B | ADAPTER SET, PEDESTAL-COMPR. REAR FRAME | 1 | |
| 2C14203G01 | ADAPTER SET -PIEDESTAL-COMP REAR FRAME | 3 | |
| 2C14229G02 | COMPRESSOR REAR FRAME AFT SEALS | 1 | |
| 2C14602 | FIXTURE, RESTRAIN - TURB. REAR FRAME TO LPT ROTOR | 1 | |
| 2C14602 REV H | FIXTURE, RESTRAIN - TURB. REAR FRAME TO LPT ROTOR | 1 | |
| 2C14602G01 | FIXTURE, RESTRAIN-TURB REAR FRAME TO LPT-ROTOR | 1 | |
| 2C14602G02 | FIXTURE, RESTRAIN-TURB REAR FRAME TO LPT-ROTOR | 2 | |
| 2C14602G03 | FIXTURE - RESTRAIN TURB REAR FRAME TO LPT ROTOR | 4 | |
| 2C14602G04 | FIXTURE, RESTRAIN - TURBINE REAR FRAME TO LOW PRESSURE TURBINE ROTOR | 2 | |
| 2C14602P05 | FIXTURE,RESTRAIN-TURB REAR FRAME TO LPT ROTOR | 1 | |
| 2C14653G01TK | BRACKET SET TURBINE REAR FRAME TO SUB ASSEMBLY STAND | 1 | |
| 2C14661G01 | FIXTURE, INSTALLREMOVE COMP REAR FRAME ASSY | 2 | |
| 2C14661G02 | FIXTURE, INSTALLATION/ REMOVAL COMPRESSOR REAR FRAME ASSEMBLY ( INSTALLATION/ REMOVAL FIXTURE ) | 1 | |
| 2C14675 | SUPPORT, SUMP HOUSING-COMPR REAR FRAME, AFT | 1 | |
| 2C14778G01 | TOOLset，position-oil supply&scavenge tube,turbine rear frame | 2 | |
| 2C14780 | ADAPTER, PEDESTAL - COMP REAR FRAME | 1 | |
| 2C14780 REV E | ADAPTER, PEDESTAL - COMP REAR FRAME | 1 | |
| 2C14780G02 | ADAPTER, PEDESTAL - COMPRESSOR REAR FRAME | 2 | |
| 2C14875G01 | PROTECTOR, COMPRESSOR REAR FRAME OUTER AFT FLANGE | 1 | |
| 2C15013G01 | COMP. REAR FRAME SUMP MODIFIED FIXTURE | 1 | |
| 2C15600G01 | FIXTURE, POSITION-COMPR REAR FRAME SUMP | 1 | |
| 2C15600G01/P03 | COMPRESSOR REAR FRAME SUMP FIXTURE | 1 | |
| 2C18044 | ADAPTER SET ASSYPEDESTAL-COMPRESSOR REAR FRAME | 1 | |
| 2C18044G01 | ADAPTER PEDESTAL - COMPRESSOR REAR FRAME (PEDESTAL ADAPTERS) | 1 | |
| 2C18052G01 | TURBINE REAR FRAME OIL SUPPLY AND SCAVENGE TUBE POSITIONING TOOL SET | 1 | |
| 2C6025 | PROTECTOR,FUEL NOZZLE PORT-COMPRESSOR REAR FRAME | 1 | |
| 2C6211 | FIXTURE, LIFT-ENG. TURNOVER, TURB. REAR FRAME | 1 | |
| 2C6211 REV L | FIXTURE, LIFT-ENG. TURNOVER, TURB. REAR FRAME | 1 | |
| 2C6281 | GAGE SET, CONCENTRICITY - COMPR. REAR FRAME | 1 | |
| 2C6281 REV M | GAGE SET, CONCENTRICITY - COMPR. REAR FRAME | 1 | |
| 2C628I | GAGE SET, CONCENTRICITY - COMPR. REAR FRAME | 1 | |
| 2C62II | FIXTURE, LIFT-ENG. TURNOVER, TURB. REAR FRAME | 1 | |
| 2C6500 | FIXTURE , RESTRAINING COMPR REAR FRAME | 1 | |
| 2C6500G03 | Fiixture,restraining-compr rear frame | 1 | |
| 2C6812G01 | BRACKET , TURBINE REAR FRAME | 1 | |
| 2C81536G03 | SLING, EXHAUST FRAME REAR | 1 | |
| 2OHME65B00780-1 | LIFTING FRAME/SLINGS WITH STORAGE DOLLY FOR REMOVAL/INSTALLATION APU - REAR MOUNT | 3 | |
| 30R0862G01 | Fixture,welding frame A/O turb rear | 1 | |
| 30R0863G01 | Fixture,inspection frame A/O turb rear | 1 | |
| 30R0864G01 | Fixture,inspection frame A/O turb rear | 1 | |
| 30R0867G01 | Fixture,welding frame A/O turb.rear | 1 | |
| 30R0868G01 | Fixture,inspection frame A/O turb rear | 1 | |
| 856A1431G03 | FIIXTURE, RESTRAINING-HPT NOZZLE ASSEMB(THE RESTRAIN FIXTURE IS USED TO RESTRAIN THE NOZZLE SEGMENTS OF THE HP TURBINE NOZZLE ASSEMBLY CIRCUMFERENTIALLY DURING THE INSTALLATION OR REMOVAL FROM THE COMPRESSOR REAR FRAME (CRF) | 7 | |
| 856A1800 | BRACKET SET, SUPPORT - TURBINE, REAR FRAME FORWARD FLANGE | 1 | |
| 856A1800 G02 | Bracket Set - Support Turbine Rear Frame FWD Flange | 18 | |
| 856A1800G01 | BRACKET SET, REAR, FRAME, CFM56-7 | 6 | |
| 856A1800G01 | BRACKET SET, SUPPORT - TURBINE, REAR FRAME FORWARD FLANGE | 6 | |
| 856A1800G02 | BRACKET SET, SUPPORT - TURBINE, REAR FRAME FWD FLANGE | 18 | |
| 856A1800G02 | BRACKET SET, SUPPORT - TURBINE, REAR FRAME FORWARD FLANGE | 18 | |
| 856A2648 | SUPPORT - REAR FAN FRAME | 1 | |
| 856A2648 G02 | Support Rear ‐ Fan Frame (Rear Support) | 2 | |
| 856A2648 REV NC | SUPPORT, REAR-FAN FRAME SUPPORT | 1 | |
| 856A2648G01 | SUPPORT, REAR FAN FRAME | 1 | |
| 856A2648G02 | SUPPORT REAR FAN FRAME | 2 | |
| 856A2691G01 | EDDY CURRENT INSP KIT REAR FRAME B73 | 26 | |
| 856A2692 | TURBINE REAR FRAME EDDY CURRENT FIXTURE | 1 | |
| 856A2692G01 | EDDY CURRENT TURBINE REAR FRAME | 1 | |
| 856A2692G03 | EDDY CURRENT INSPECTION KIT OF REAR FRAME | 1 | |
| 856A2692G04 | EDDY CURRENT INSPECTION KIT OF REAR FRAME | 1 | |
| 856A2722G01 | PINSGUIDE - LPT REAR FRAME TO LPT GASE (GUID PINS) | 6 | |
| 856A2772 | PULLER TURB REAR, FRAME | 1 | |
| 856A2772G01 | Puller - LPT Rear Frame/LPT Case (puller) | 9 | |
| 856A2773G01 | GUIDE, ALIGNMENT - LPT REAR FRAME TO LPT SHAFT (ALIGNMENT GUIDE) | 10 | |
| 856A3247 | GUIDE, ALIGNMENT - LPT REAR FRAME TO LPT SHAFT (ALIGNMENT GUIDE) | 1 | |
| 856A3247G03 | Guide, Alignment - LPT Rear Frame to LPT Shaft (alignment guide) | 10 | |
| 856A3383 | FIXTURE, ALIGNMENT - LPT REAR FRAME TO LPT (ALIGNMENT FIXTURE) | 1 | |
| 856A3383 G01 | Fixture Alignment ‐ LPT Rear Frame to LPT | 13 | |
| 856A3383G01 | Fixture, Alignment - LPT Rear Frame to LPT (alignment fixture) | 13 | |
| 856A3759G02 | Segments Handle LPT Rear Frame | 3 | |
| 8C2426G01 | Fixture，guide-turbine rear frame，horizontal | 1 | |
| 8C2427G01 | Fixture, Lift - Turb Rear Frame, Horizontal | 1 | |
| 8C2442G01 | Fixture,restrain-lp turb rotor/turb rear frame | 1 | |
| 8C2631G01 | Pedestal set-turbine rear frame | 1 | |
| 8C2631G02 | Pedestal set-turbine rear frame | 1 | |
| 8C3106G01 | fixture restrain lpt rotor turbine rear frame | 1 | |
| 8C3107 | COVER SET - PROTECTIVE - TURBINE REAR FRAME | 1 | |
| 8C3110 | CLOSURE SET - LEAK TEST- TURBINE REAR FRAME | 1 | |
| 8C3114 | BRACKET SET - ROLLOVER STAND - TURBINE REAR FRAME | 1 | |
| 9448M84G01 | PEDESTAL SUPPORT-COMPRESSOR REAR FRAME | 1 | |
| 956A6300P02 | Cover,protector-tube turbine rear frame | 1 | |
| 956A6312 | FIXTURE - INSTALLATION GUIDE - LPT REAR FRAME | 1 | |
| 956A6312G01 | Fixture,guide installation-lpt,rear frame | 1 | |
| 956A6312G02 | Fixture,guide installation-lpt,rear frame | 1 | |
| 956A6318 | FIXTURE - REMOVE - LPT REAR FRAME | 1 | |
| 956A6318G01 | Fixture remove lpt rear frame | 1 | |
| 956A6550 | FIXTURE - GRINDING - LPT REAR FRAME | 1 | |
| 956A6550G01 | Fixture,grinding-lpt rear frame plateau de reprise | 1 | |
| 956A6550G02 | Fixture,grinding-lpt rear frame plateau de reprise | 1 | |
| 956A6551 | DOLLY - STORAGE - LPT REAR FRAME GRINDING TOOLS | 1 | |
| 956A6551G01 | Dolly,storage-lpt rear frame grinding tools | 1 | |
| 956A6552 | GAUGING RING - LPT REAR FRAME | 1 | |
| 956A6554 | PROTECTOR - GRINDING - LPT REAR FRAME | 1 | |
| 956A6555 | STAND - ASSY/DISASSY -TURBINE REAR FRAME | 1 | |
| 956A6555G02 | stand assy disassy turbine rear frame | 1 | |
| 956A6558 | ADAPTER - LPT REAR FRAME | 1 | |
| 956A6558G02 | Adapter-LPT rear frame | 1 | |
| 956A6569 | SET - TORQUE - OIL TUBE - LPT REAR FRAME | 1 | |
| 956A6569G01 | Set,torque-oil tube,lpt rear frame kit cle raccord huile | 1 | |
| 956A6569G02 | Set,torque-oil tube,lpt rear frame kit cle raccord huile | 1 | |
| 956A6570 | FIXTURE - COVER - LPT REAR FRAME | 1 | |
| 956A6570G01 | Fixture,cover-lpt rear frame | 1 | |
| 956A6570G02 | Fixture,cover-lpt rear frame | 1 | |
| 956A6571 | FIXTURE - STORAGE SUPPORT - LPT REAR FRAME | 1 | |
| 956A6571G01 | Fixture,storage support-lpt rear frame | 1 | |
| 956A6582 | FIXTURE, PUSH - FERRULE, LPT REAR FRAME | 1 | |
| 956A6582G01 | Fixture,push-ferrule,lpt rear frame | 1 | |
| 956A6583 | FIXTURE, PUSH - SQUEEZE FILM, LPT REAR FRAME | 1 | |
| 956A6583G01 | Fixture,push-squeeze film,lpt rear frame | 1 | |
| 956A6587G01 | Container-frame.lpt rear assy conteneur carter echappement | 1 | |
| 956A6587G02 | Container-frame.lpt rear assy conteneur carter echappement | 1 | |
| 956A7314 | SET - LIFTING BRACKET - TURBINE REAR FRAME | 1 | |
| 956A7314G0 | SET, LIFTING BRACKET - TURBINE REAR FRAME | 1 | |
| 956A7314G01 | SET, LIFTING BRACKET-TURBINE REAR FRAME | 1 | |
| 956A7314G02 | SET, LIFTING BRACKET-TURBINE REAR FRAME | 3 | |
| 956A7314G03 | SET, LIFTING BRACKET-TURBINE REAR FRAME | 2 | |
| 956A7314G04 | SET, LIFTING BRACKET - TURBINE REAR FRAME | 9 | |
| 956A7314G05 | SET, LIFTING BRACKET - TURBINE REAR FRAME | 2 | |
| 956A7643 | TOOL SET - PROTECTOR - TURBINE REAR FRAME ARM | 1 | |
| 956A7647 | SET - TORQUE - TURBINE REAR FRAME OIL TUBES | 1 | |
| 956A7668 | COVER, PROTECTOR - TURBINE REAR FRAME | 1 | |
| 956A7668P01 | COVER, PROTECTOR - REAR, TURBINE REAR FRAME | 1 | |
| 956A8505 | FIXTURE - LIFT - LPT REAR FRAME AND LPT CASE | 1 | |
| 956A8505G01 | Fixture,lift-lptrear frame and lpt case | 1 | |
| 956A8506 | FIXTURE - LIFT & TURN - FRAME - LPT REAR ASSEMBLY | 1 | |
| 956A8506G01 | Fixture,lift and turn-frame,lpt rear assembly | 1 | |
| 956A8507 | DOLLY - STORAGE - LPT REAR FRAME | 1 | |
| 956A8507G01 | Dolly storage-lpt rear frame | 1 | |
| 956A8507G02 | Dolly storage-lpt rear frame | 1 | |
| 956A8508 | COVER - PROTECTOR - FRAME - LPT REAR | 1 | |
| 956A8512 | FIXTURE - LIFT - SHIELD - LPT REAR FRAME | 1 | |
| 956A8514 | CONTAINER - FRAME - LPT REAR ASSY | 1 | |
| 956A8514G01 | Container-frame，lpt rear assy | 1 | |
| 956A8521 | GUIDE - PIN - FRAME - LPT REAR | 1 | |
| 956A8521G01 | Guide pin-shield,lpt rear frame | 1 | |
| 956A8528 | PROTECTOR - TUBES - LPT REAR FRAME | 1 | |
| 956A8528G01 | Protector-tubes,lpt rear frame | 1 | |
| 956A8536 | PROTECTOR - FRAME - LPT REAR ASSY | 1 | |
| 956A8622 | FIXTURE - REMOVE - LPT REAR FRAME ASSY | 1 | |
| 956A8637 | FIXTURE - REMOVE - LPT REAR FRAME ASSY | 1 | |
| 956A8663 | FIXTURE - LIFT - INSTALL -LPT REAR FRAME ASSY | 1 | |
| 956A8663G01 | Fixture,lift,install-lpt rear frame assy | 1 | |
| 956A8663G02 | Fixture,lift,install-lpt rear frame assy | 1 | |
| 956A8667G04 | SET, LIFTING BRACKET - TURBINE REAR FRAME | 4 | |
| 956A8687 | DOLLY - STORAGE - LPT REAR FRAME LIFTING FIXTURE | 1 | |
| 956A8687G01 | Dolly,storage-lpt rear frame lifting fixture | 1 | |
| 9680M73G03 | PLUG, BORESCOPE FOR REAR FRAME STAGE | 1 | |
| 99A57103057003 | REAR FRAME FITTING SHIM | 1 | |
| 9C1088G07 | Fixture,restrain-lpt rotor/turbine rear frame | 1 | |
| 9C1230G07 | Fixture, Guide - Turbine Rear Frame | 1 | |
| 9C1323G01 | Bracket set,rollover stand-turbine rear frame | 1 | |
| AFK-1014 | Custom Ultrasonic Kit, PART 4 53-10-13 for the WING REAR SPAR - STA 663.75 REAR SPAR BULKHEAD SIDE FRAME FITTING FAIL SAFE STRAP. Kit includes 1 of each AFM-560AT & AFS-0541 Transducers, 1 NDT3312 Reference Standard and 1 ABNC-MD6. Supplied with a waterpr | 1 | |
| CP30449-2 | LIFTING/TURNOVER PARKING FRAME (REAR) FOR FANCASE - RB211-535/535E5 | 1 | |
| CP30449/2 | LIFTING/TURNOVER PARKING FRAME (REAR) FOR FANCASE - RB211-535/535E5 | 1 | |
| CP30542 | HANDLING FRAMES REAR HP COMP SHAFT & CONES - RB211-22B,524,535C,535E4 | 1 | |
| HU55143 | TURNOVER FRAME (REAR) LP COMPRESSOR CASE | 1 | |
| HU55340 | LP COMPRESSOR CASE, REAR HANDLING FRAME | 1 | |
| K33807-3 | FRAME, RIGHT REAR WINDOW | 1 | |
| K33819-3 | FRAME, LEFT REAR WINDOW | 1 | |
| ME7-4847PKIT | Tripod Jack - Rear (frame 45) | 1 | |
| T016084 | Turbine rear frame NDT kit | 1 | |
| lC6802 | TOOL, PILOT & GUIDE-TURB REAR FRAME | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
