| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 282775AT20 | Press Plate | 1 | |
| 73-5 | PRESS PLATE | 2 | |
| RBT400363 | Press Plate | 1 | |
| WORKAID NO. 6 | PRESS PLATE | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 114-212-1 | Pressure Plate Assembly Fixture | 1 | |
| 114-212-2 | Pressure Plate Assembly Fixture | 1 | |
| 114-212-3 | Pressure Plate Assembly Fixture | 1 | |
| 1X54139177 | PRESSURE PLATE | 1 | |
| 1X54139289 | PRESSURE PLATE | 1 | |
| 1X54176807 | PRESS-IN PLATE | 1 | |
| 1X54176808 | PRESS-IN PLATE | 1 | |
| 1X54176852 | PRESSURE PLATE | 1 | |
| 1X54176853 | PRESSURE PLATE | 1 | |
| 1X54176854 | PRESSURE PLATE | 1 | |
| 1X56176813 | PRESSURE PLATE | 1 | |
| 216692 | Pressure Test Plate | 2 | |
| 216692PM | PRESSURE TEST PLATE | 1 | |
| 216718 | PRESSURE TEST PLATE AND PLUG | 1 | |
| 216719 | PRESSURE TEST PLATE AND PLUG | 1 | |
| 216720 | PRESSURE TEST PLATE AND PLUG | 1 | |
| 216746 | PRESSURE TEST PLATE AND PLUG | 1 | |
| 501305 | Locating Plate for Arbor Press | 1 | |
| 717001 | PLATE, PRESSURE TEST CAPPING | 2 | |
| 2242977 | ADAPTOR PLATE AND PRESSURE TEST BODY | 1 | |
| 6796235 | PULLER PLATE - COMPRESSOR EXTENSION SHAFT BEARING | 3 | |
| 6797680 | SUPPORT PLATE, COMPRESSOR CASE | 1 | |
| 23054764 | Plate – Buildup, 1st Stage Wheel Assembly, Low Pressure Turbine Rotor | 1 | |
| 23054765 | Plate – Buildup, 2nd Stage Wheel Assembly, Low Pressure Turbine Rotor | 1 | |
| 23054766 | Plate – Buildup, 3rd Stage Wheel Assembly, Low Pressure Turbine Rotor | 1 | |
| 23068498 | Adapter – Arbor Press, Plate Puller | 1 | |
| 28-4-P | NICOPRESS ZINC PLATED COPPER SLEEVE - 5/32 INCH | 1 | |
| 294861-1 | BEARING REMOVAL ADAPTER (USED TO LOCATE IN LARGER ID OF 3860168I STARTER GEAR TO PROVIDE A PRESSING SURFACE WHEN PRESSING GEAR FROM 3860160-1 BALL BEARING. USE WITH PROTO PULLER 4214 AND 294870-4 BEARING REMOVAL PLATE) | 1 | |
| 294861-2 | BEARING REMOVAL ADAPTER (USED TO LOCATE IN SMALLER ID OF 38601681 STARTER GEAR TO PROVIDE A PRESSING SURFACE WHEN PRESSING GEAR FROM 3860160-1 BALL BEARING. USE WITH PROTO PULLER 4214 AND 294870-4 BEARING REMOVAL PLATE) | 1 | |
| 2C81217G01 | Blankoff Plates − Compressor | 1 | |
| 2F10368 | #5 Pressure Block Off Plate - A1 only | 1 | |
| 32-2 | PRESSURE PLATE (SV) | 3 | |
| 6796950-8 | PRESSING PLATE (BELL 206A/B) | 1 | |
| 6799627-20 | PLATE PRESS 1,2,3RD STAGES | 1 | |
| 6799627-21 | PLATE PRESS 1,2,3RD STAGES | 1 | |
| 6799627-22 | PLATE PRESS 1,2,3RD STAGES | 1 | |
| 6SF6350-501 | FUEL TANK PRESSURE PLATE | 1 | |
| 831132-1 | Bearing Press Fixture Split Plate | 1 | |
| 834659-1 | BALL PRESS PLATE | 1 | |
| 8814768000 | INSPECTION TEMPLATE ASSY FOR AXIAL COMPRESSOR BLADES | 1 | |
| 89ED03545-1 | PRESS TEST PLATE_[89ED03545-1] | 1 | |
| 89ED03545-2 | PRESS TEST PLATE_[89ED03545-2] | 1 | |
| 89ED03549 | PRESS TEST PLATE_[89ED03549] | 1 | |
| 98D57004000216 | PRESSURE PLATE | 1 | |
| 98S53505006000 | Pressure Plate Calibration | 4 | |
| 98S53505006200 | PRESS. PLATE FR. 25 / FR. 27-INTERNAL | 1 | |
| 98S53505006202 | PRESS. PLATE FR. 25 / FR. 27-INTERNAL CALIBRATION | 1 | |
| A21006-1 | BLANKING PLATE- DUCT PRESS & LEAK CHK | 1 | |
| A521-11527-000W6700-01 | ADAPTER PLATE FOR PRESSURE TEST | 1 | |
| AC21826000-1 | RIVETING TOOL (PRESSURE PLATE) | 5 | |
| AHM7280 | PLATE,PRESSURE;|U/O AIRCRAFT BRAKE SYSTEM EQUIP.; | 1 | |
| ATE2730-001 | PLATE-BLANKING,PRESSURE SWITCH | 1 | |
| ATI540-5 | PRESSURE PLATE (NAIL TAKER) | 2 | |
| C0240-035-0810-ZINCPLATED | RESSORT COMPRESSION 0.240 OD X 0.035 WIRE X 0.810 LG ZINC PLATED | 1 | |
| C57003-7 | PRESSPLATE | 1 | |
| G36047-1 | BLANKING PLATE - LEAK TEST, PRESSURE COMPENSATOR DUCT | 2 | |
| G600-210002-25 | PRESSURE CAP ADAPTER PLATE | 1 | |
| GS12987 | PRESSURE PLATE | 1 | |
| GS13798-1 | PLATE PRESSURE TEST | 2 | |
| GS14204-1 | PLATE PRESSURE TEST | 1 | |
| GS15586-1 | PRESSURE PLATE | 1 | |
| GS19660-1 | PLATE, PRESSURE TEST | 1 | |
| GS19758-1 | PLATE, PRESSURE TEST | 1 | |
| GS20706-1 | COMPRESSOR, SEAL COVER PLATE | 1 | |
| GS20849-1 | PRESS. WEAR PLATE | 1 | |
| GS23001-1 | WEAR PLATE PRESS | 1 | |
| GS24014-2 | PLATE, PRESSURE TEST | 1 | |
| GU30645 | PRESSURE PLATE | 1 | |
| HS8905 | PLATE PRESSURE | 1 | |
| HU82159-2 | SECTION TEMPLATES CONCAVE (PRESSURE) SIDE 36 | 1 | |
| J32075-7 | COMPRESSION PLATE ASSEMBLY | 1 | |
| LAG-3301 | PRESSURE PLATE AND STATOR PLATE | 1 | |
| LM V2 RT1F-0001-009 | Pressure Plate, Top | 1 | |
| LTCT7905-01 | Compressor Shaft Stretch Rest Plate | 1 | |
| MH16442 | PLATE - PRESSURE, LARGE | 1 | |
| MH16443 | PLATE - PRESSURE, SMALL | 1 | |
| PWA12637 | HPC -COMPRESS ROD -PLATE | 1 | |
| PWA26934 | PLATE - PRESS TEST IMC,FRONT_[PWA26934] | 2 | |
| PWA28181C | PLATE - PRESSURE TEST IMC REAR_[PWA28181C] | 1 | |
| PWA75284 | PULLER-LOW PRESSURE PLATE FORM SHAFT, REAR | 2 | |
| PWC30859 | press. test fixture plate | 4 | |
| RB6796950-10 | Pressing Plate | 2 | |
| RB6796950-11 | Pressing Plate | 2 | |
| RB6796950-12 | Pressing Plate | 2 | |
| RB6796950-13 | Pressing Plate | 2 | |
| RB6796950-14 | Pressing Plate | 2 | |
| RB6796950-23 | Pressing Plate | 2 | |
| RB6796950-4 | Pressing Plate | 2 | |
| RB6796950-5 | Pressing Plate | 2 | |
| RB6796950-6 | Pressing Plate | 3 | |
| RB6796950-7 | Pressing Plate | 3 | |
| RB6796950-8 | Pressing Plate | 2 | |
| RB6898412 | Compressor Seal Spring Plate | 2 | |
| RBT18562 | Main Rotor Trunnion Bearing Inner Race Pressing Plate | 1 | |
| SB737-57A1271 | PRESSURE PLATE SET | 1 | |
| ST-71; ST-71-8 | PRESSURE PLATE (PRESSURE PLATE) 1/2 " | 1 | |
| ST1718-17 | PRESSURE PLATE | 1 | |
| T102 | BEARING PLATE PRESSING (ROTOR & FRAME ASSY) | 3 | |
| TE21T-31001-24 | PLATE PRESS RELIEF | 1 | |
| TM0131G004 | INSPECTION TEMPLATE ASSY FOR AXIAL COMPRESSOR BLADES | 1 | |
| TM6935G001 | EROSION GAGE INSPECTION TEMPLATE ASSY FOR AXIAL COMPRESSOR BLADES | 2 | |
| TM6936G001 | ENGINE COMPRESSOR EROSION CHECK TEMPLATE ASSEMBLY D23 | 3 | |
| TSF5T-52001-2 | COVER PLATE, CABIN PRESSURE RELIEF VALVE KIT | 1 | |
| UZ9605010000000 | PRESSURE TEST PLATE | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
