| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 6795997 | Press | 2 | |
| 6872543 | PRESS | 2 | |
| 6893377 | PRESS | 2 | |
| 6893700 | PRESS | 2 | |
| 6895538 | Press | 1 | |
| 460006268 | PRESS | 6 | |
| CG473HY | PRESS | 1 | |
| F26752000 | PRESS | 1 | |
| FN-16 | PRESS | 1 | |
| LTCT6073 | PRESS | 1 | |
| PWC50258 | PRESS | 3 | |
| PWC71180 | press | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| A21010-203 | VACUUM TANK - PRESSURE RELIEF VALVE TEST | 12 | |
| DAPT65-0093-00 | ADAPTER PRESSURIZATION (HYDRAULIC HAND PUMP CONNECTOR) | 7 | |
| 3-5290-T22 | SPRING COMPRESSION TOOL | 1 | |
| 2024488-1 | BEARING PRESS FIXTURE | 1 | |
| 287821-1 | SPRING COMPRESSOR | 1 | |
| AT5231 | SHAFT PRESSING AID | 1 | |
| F72928-62 | Air Pressure Regulator Equip - Elevator Feel Comp | 8 | |
| F72928-63 | Air Pressure Regulator Equip - Elevator Feel Comp | 12 | |
| F80206-1 | Breakout Box - Cabin Control Pressure | 5 | |
| #3G‐1013 | BINKS GALVANIZED PRESSURE POT45 LITER | 1 | |
| (CALIB) 0-25 MPA | PRESSURE GAUGE (CALIBRATION) | 1 | |
| (CALIB) 10-16 MPA | PRESSURE GAUGE (CALIBRATION) | 1 | |
| (CALIB) 101-00212 | PRESION DE COMB. (PRESSURE TESTER (CALIBRATION) | 1 | |
| (CALIB) 1170205.01 | PRESSURE GAUGE (CALIBRATION) | 1 | |
| (CALIB) 1180015.01 | PRESSURE GAUGE (CALIBRATION) | 1 | |
| (CALIB) 14.6805.6010 | STRUT PRESSURE GAUGE (CALIBRATION) | 1 | |
| (CALIB) 170207.02 | PRESSURE GAUGE (CALIBRATION) | 1 | |
| (CALIB) 17TES0960 | RDI FA2100 DFDR DOWNLOAD AND DECOMPRESSION SOFTWARE (CALIBRATION) | 1 | |
| (CALIB) 201202-CA | BRAKE PRESSURE GAUGE Same as P/N 98S32405002000 | 1 | |
| (CALIB) 215371-0 | DIGITAL PRESSURE GAUGE (CALIBRATION) | 1 | |
| (CALIB) 2311FA | Pressure Tester (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 299897-0 | DIGITAL PRESSURE GAUGE (CALIBRATION) | 1 | |
| (CALIB) 30400101 | Pressure Gauge (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 370 | Digital Pressure Gauge (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 406800 | Differential Pressure Manometer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 460007169 | COMPRESS COMPRESSOR - SPRING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 500PSIXP21 | T88448 PRESSURE GAUGE (CALIBRATION) | 1 | |
| (CALIB) 525A | Temperature & Pressure Calibrator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 525B | Temperature & Pressure Calibrator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 526640361 | TIRE PRESSURE TESTER 0-18 BAR /0-260 PSI (CALIBRATION) | 1 | |
| (CALIB) 781019-0 | ELEC HYDR.FOOT PUMP WITHOUT PRESSURE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 95031S | DIGITAL PRESSURE GAUGE (CALIBRATION) | 1 | |
| (CALIB) 97A29102035000 | CONNECTR CONNECTOR-PRESSURIZING,HYDRAULI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97A32402018000 | GAGE PRESSURE GAGE-BRAKE BLOCK HYDRA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97A32602403100 | TIRE PRESSURE SIMULATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97L28001013000 | FUEL TEST PRESS GAUGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A49009001002 | APU CLEANING DEVICE (pressure at 9 bar) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D28108562000 | ADAPTER ADAPTER, PRESSURE DRAIN - ACT (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) 98D28108658000 | ACTPRSS TOOL-PRESSURE TEST,ACT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D29003501000 | FILLUNIT FILL UNIT-AIR PRESSURIZING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D36103000000 | PRESSURE LOSS TEST (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D47009001000 | TESTER PRESSURE TESTER, FTIS RETROFIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D47009001002 | TESTER PRESSURE TESTER, FTIS RETROFIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D47009001003 | TESTER PRESSURE TESTER, FTIS RETROFIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D47209001000 | VACUUM & PRESSURE TEST KIT, IGGS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F28109018000 | TK PRESS GAUGE - HTTP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32104021000 | TOOL TOOL - COMPRESSION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32104021001 | TOOL TOOL - COMPRESSION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L28004034000 | KIT AIR PRESSURE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L28004035000 | TEST RIG-AIR PRESSSURE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98S32005006000 | TOOL TO COMPRESS NLG SHOCK ABSORBER | 1 | |
| (CALIB) 98S32405000000 | BRAKE PRESS BRK SYS PURGING TOOL-20028A | 1 | |
| (CALIB) 98S32405002000 | BRAKE PRESSURE GAUGE | 1 | |
| (CALIB) 98V27104052000 | ACTUATOR COMPRESSION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V28004004000 | FUEL PRESSURE GAUGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V28004012000 | HOSE PRESSURE TEST (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A21010-203 | VACUUM TANK PRESSURE RELIEVE VALVE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AIT320008-003-01 | Compression Tool - MLG A330/A340-200/300 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AIT320008-003-02 | Compression Tool - MLG A340-300B (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AIT320008-003-03 | Compression Tool - MLG A340-500/600 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AIT320008-003-04 | TOOL TOOL-COMPRESSION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AIT320008-003-4 | TOOL-COMPRESSION (CALIBRATION) | 1 | |
| (CALIB) AIT320020-001 | BOGIE COMPRESSION TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AN6011-1B | PRESSURE GAUGE | 1 | |
| (CALIB) B28005-42 | PLUG - PRESSURE TEST FUEL SYST (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C26004-34 | PRESSURE GAUGE 0-60PSI (CALIBRATION) | 1 | |
| (CALIB) C36001-51 | PRESSURE GAUGE (CALIBRATION) | 2 | |
| (CALIB) C51003-28 | SKIN MEASURE PRESS GAUGE (CALIBRATION) | 1 | |
| (CALIB) C79001-1 | PRESSURE GAUGE (CALIBRATION) | 1 | |
| (CALIB) CG9213001-0001 | KIT, PRESSURIZATION BLANKING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9262401-0001 | ADAPTER, CARGO POSITIVE PRESSURIZATION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9281001-0001 | WING PRESSURIZATION KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D38999/26FA98SA | ELECTRICAL CONNECTOR FOR PRESSURE TRANSDUCER (CALIBRATION) | 1 | |
| (CALIB) DETTPS8001 | TANK PRESSURISATION SYSTEM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DPG2000BBL300PSIG-5 | AIRCRAFT TIRE PRESSURE GAUGE (CALIBRATION) | 1 | |
| (CALIB) DRT68003 | COMPRESS COMPRESSOR - SPRING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DRT69426 | Spring compressor (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) E2A | Differential Pressure Tester (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) F72928-58 | Air Pressure Regulator Eqpm. (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) F72977-44 | Gage Eqpt - Hydraulic Brake System Pressure Checking (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) F72977-62 | Gage Eqpt - Hydraulic Brake System Pressure Checking (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FT20 | POWERPAK POWERPAK OF HYDR.PRESSURE COMPR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FT200 | POWERPAK POWERPAK OF HYDR.PRESSURE COMPR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FT200B | POWERPAK POWERPAK OF HYDR.PRESSURE COMPR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G21003-1 | Probe Static Pressure (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G600-210004-227 | KIT, PNEUMATIC PRESSURE TEST 220V/50HZ (CALIBRATION) | 1 | |
| (CALIB) G601-210007-201 | KIT, PNEUMATIC PRESSURE TEST 220-240V/50 (CALIBRATION) | 1 | |
| (CALIB) GS20842-1 | PRESSURIZER BARREL | 1 | |
| (CALIB) GS23137-1 | BLADE SEAL COMPRESSOR | 1 | |
| (CALIB) GS23413-1 | SEAL COMPRESSOR | 1 | |
| (CALIB) GS23420-1 | BLADE SEAL COMPRESSOR | 1 | |
| (CALIB) GS23435-1 | HUB PRESSURIZER | 1 | |
| (CALIB) GSE55787 | SPRING SPRING - COMPRESSOR, WLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GSE56111 | TOOL TOOL, COMPRESSION - SHOCK STRUT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) H-2657 | FUEL PUMP REPOSITION/PRESSURE TEST (CALIBRATION) | 1 | |
| (CALIB) HC1042 | GAUGE, PRESSURE 0-5000 PSI1 (CALIBRATION) | 2 | |
| (CALIB) HLA6424 | DIGITAL PRESSURE GAUGE 0-31 BAR (CALIBRATION) | 1 | |
| (CALIB) HSK6263-1 | PRESSURE LATCH TESTER (CALIBRATION) | 1 | |
| (CALIB) ITPS0571 | PRESSURE GAUGE (CALIBRATION) | 1 | |
| (CALIB) J27076-11 | Test assy - Pressure Switch, Nose Gear (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J38001-20 | PRESS EQUPMNT- WASTE DRAIN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J47309 | COMPRESSION TOOL (CALIBRATION) | 1 | |
| (CALIB) JFP201M | Differental Pressure Tester (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K47003-1 | Equipment NGS Motor Driven Compressor R/I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) KELLER LEO1 | METER PRESSURE (CALIBRATION) | 1 | |
| (CALIB) MODEL DPG-108 | DIGITAL PRESSURE GAUGE (CALIBRATION) | 1 | |
| (CALIB) MT-TPS300K | Tank pressurization system (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) OMEGA-DPGM8001-6 | DIGITAL PRESSURE GAUGE (CALIBRATION) | 1 | |
| (CALIB) PWC47123 | FUEL MANIFOLD PRESSURE INDICATOR UNIT (CALIBRATION) | 1 | |
| (CALIB) RRT058599 | OIL PRESSURE FILL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SM705 | DECOMPRESSOR FROM JMP/CFM56/D/4777/C200 ENGINE CLEANOUT TOOL (CALIBRATION) | 1 | |
| (CALIB) TM1609G001 | POCKET PRESSURE SWITCH AEROVAL (CALIBRATION) | 1 | |
| (CALIB) XP2I | DIGITAL PRESS.GAGE (CALIBRATION) | 1 | |
| (CALIB) Y-60A1 | PRESSURE GAUGE (CALIBRATION) | 1 | |
| -37 supersedes -28 and -10 | ADAPTER EQUIPMENT - LOAD TEST, PRESSURE RELIEF DOOR LATCH | 1 | |
| 0 - 25 PSI (0 - 175 KPA) ±1% ACCURACY | GAUGE - PRESSURE | 1 | |
| 0-1000PSI | PRESSURE GAUGE TOOL | 1 | |
| 0-10PSIX75MM | TOOL - PRESSURE GAUGE | 1 | |
| 0-1400PSI | PRESSURE GAUGE (0-1400 PSI) | 1 | |
| 0-140PSI | PRESSURE GAUGE | 1 | |
| 0-145BAR | JACK PRESSURE GAUGE | 1 | |
| 0-150 PGPT (FOR PRESS.TESTER) | PRESSURE GAUGE (IN 0010280) | 1 | |
| 0-15000 PSI | PRESSURE GAUGE (TOOL) | 1 | |
| 0-15000PSI | PRESSURE GAUGE (TOOL) | 1 | |
| 0-160PSI | PRESSURE GAUGE TOOL | 1 | |
| 0-16BAR | PRESSURE GAUGE | 1 | |
| 0-170PSI | PRESSURE GAUGE TOOL | 1 | |
| 0-20BAR | TYRE PRESSURE GAUGE | 1 | |
| 0-232BAR | JACK PRESSURE GAUGE | 1 | |
| 0-250BAR | PRESSURE GAUGE | 1 | |
| 0-25BAR | PRESSURE GAUGE - 0 TO 25 BAR , 2" DIAL SIZE | 1 | |
| 0-265BAR | JACK PRESSURE GAUGE | 1 | |
| 0-30 PSI | PRESSURE GAUGE | 1 | |
| 0-300 BAR | PRESSURE GAUGE | 1 | |
| 0-300 PSI | PRESSURE GAUGE | 1 | |
| 0-3000PSIX63MM | TOOL - GAUGE PRESSURE 0-3000 PSI | 1 | |
| 0-300PSI | PRESSURE GAUGE 0-300 PSI TOOL | 1 | |
| 0-300PSIX63MM | TOOL - PRESSURE GAUGE | 1 | |
| 0-3500PSI | PRESSURE GAUGE | 1 | |
| 0-350PSI | PRESSURE | 1 | |
| 0-400 | GAUGE PRESS N2 | 1 | |
| 0-4000 PGPT (FOR PRESS. TESTER) | PRESSURE GAUGE (IN 0010280) | 1 | |
| 0-40000 PSI | HIGH PRESSURE GAUGE | 1 | |
| 0-4000LBF/IN2 | PRESSUR GAUGE | 1 | |
| 0-4000PSI | PRESSURE GAUGE, AIR, MAX 4000 PSI | 1 | |
| 0-4000PSIX100MM | TOOL - PRESSURE GAUGE | 1 | |
| 0-4500 PSI | PRESSURE GAUGE | 1 | |
| 0-4BAR | A330 PRESS GAUGE FIRE SYS TEST KIT | 1 | |
| 0-5000PSI | PRESSURE GAUGE TOOL | 1 | |
| 0-5000Psi | Gauge Pressure | 1 | |
| 0-517 KPA | LOW PRESSURE TEST GAUGE 0-75PSI | 1 | |
| 0-60 PT | PRESSURE TESTER (IN 0010280) | 1 | |
| 0-600 PSI | PRESSURE GAGE | 1 | |
| 0-600-HVAC | PRESSURE REGULATING VALVE | 1 | |
| 0-6000PSI | PRESSURE GAUGE TOOL | 1 | |
| 0-600PSI | PRESSURE GAUGE, 0-600PSI, 40BAR | 1 | |
| 0-62316 | SCREW PRESS | 1 | |
| 0-62790 | SCREW PRESS | 1 | |
| 0-90PSI | PRESSURE GAUGE TOOL | 1 | |
| 0.4375-20 UNJF-3A | TEST FITTING, PRESSURE SWITCH | 1 | |
| 0.5625-18 UNJF-3B | TEST FITTING, PRESSURE SWITCH | 1 | |
| 00-0002-09009 | CSU PRESSURE TESTER 40 BAR | 1 | |
| 00-200-8223 | PRESSURE GAUGE | 1 | |
| 00029ETD001 | ALIGNMENT BLOCK (AIR PRESS SUPPLY) | 1 | |
| 00061-2330-0001 | VANE PRESSURE CHAMBER | 1 | |
| 000993-292 | PRESSURE GAUGE | 1 | |
| 00127-010-000 | PRESSURE GAUGE | 1 | |
| 00127-027-000 | PRESSURE GAUGE- 0 -350 PSI - MANO METER | 1 | |
| 00127-028-000 | PRESSURE GAUGE | 1 | |
| 00127-029-000 | PRESSURE GAUGE | 1 | |
| 00127-100-000 | PRESSURE GAUGE | 1 | |
| 00145-023-000 | PRESSURE REGULATOR | 1 | |
| 00145-040-000 | PRESSURE REDUCER | 1 | |
| 00145-125-000 | COMPRESSED AIR PROCESSING UNIT | 1 | |
| 001589 | 1 BOTTLE NITROGEN LOW PRESSURE REGULATOR SYSTEM | 1 | |
| 001769 | 1 Bottle High Pressure Nitrogen Regulator System | 2 | |
| 002115 | TYRE PRESSURE GAGE | 1 | |
| 002A0006-73 | TOP KIT-CABIN PRESSURE INDICATION AND WARNING SYS | 1 | |
| 00310-337-03050 | MANUAL PUMP HIGH PRESSURE HOSE | 1 | |
| 004207- 0000/E | INDICATOR PRESSURE | 1 | |
| 00433-219-000 | HONDA POWER EQUIPMENT PRESSURE GAUGE | 1 | |
| 00489-073-000 | PRESSURE REGULATOR | 1 | |
| 00489-074-000 | PRESSURE REGULATOR VALVE | 1 | |
| 00489-270-000 | PRESSURE REGULAR VALVE (OVERLOAD) | 1 | |
| 00495-044-000 | PRESSURE REGULATOR | 1 | |
| 006-010115R00 | HEADER TANK PRESSURE TESTER | 1 | |
| 0061R07845 | Worm Gear Bearing Press | 1 | |
| 0061R07845PM | WORM GEAR BEARING PRESS | 1 | |
| 0061R07846 | Bearing Press Tool | 1 | |
| 0061R07846-1 | Staking Press Tool | 1 | |
| 0061R07846-1PM | STAKING PRESS TOOL | 1 | |
| 0061R07846PM | BEARING PRESS TOOL | 1 | |
| 0061R07857 | Output Shaft Bearing Press | 1 | |
| 0061R07857PM | OUTPUT SHAFT BEARING PRESS | 1 | |
| 0061R50003 | HINGE ASSEMBLY PIN PRESS FIXTURE | 1 | |
| 00624-AE99140E | ADPATER, PRESSURE | 1 | |
| 00624-AE99140E-A10/04 | ADPATER, PRESSURE | 1 | |
| 007325 | PRESSURE LEAK TEST TOOL | 1 | |
| 01 –0801- | HEAD GLOBAL EXPRESS (CE) | 1 | |
| 01-0801-0010 | Head, Global Express (Ce) | 5 | |
| 01-0801-8010 | Head, Global Express (Ce) | 1 | |
| 01-1269-0020 | Towbar, Global Express (Ce) | 4 | |
| 01-1275-0010-A1 | Towbar, Portable Global Express (CE) | 6 | |
| 01-43-1113C | PRESSURE GAUGE | 1 | |
| 01-5352-83 | Magnaflux 01-5352-83 Solvent Based Developer, Aerosol Can, 400 mL, Gas, Pressurized Liquid, White | 1 | |
| 0101KHQ20 | EPR PRESSURE HOSE | 1 | |
| 0110E102307-31 | TOOL PRESSING | 1 | |
| 0110E102307-32 | TOOL PRESSING | 1 | |
| 0110E102307-33 | TOOL PRESSING | 1 | |
| 0110E102307-34 | TOOL PRESSING ASSEMBLY | 1 | |
| 0110E102307-35 | TOOL PRESSING DISASSEMBLY | 1 | |
| 0110E102307-4 | TOOL, PRESSING ASSEMBLY | 1 | |
| 0111 | ABSOLUTE PRESSURE TRANSDUCER | 1 | |
| 014567S5-20D | CONNECTIONS FOR LOW PRESSURE HPU | 2 | |
| 0154JU | TOTAL-PRESSURE AND T | 1 | |
| 0154LF | SENSOR, PRESS & TEMP | 1 | |
| 015503-S5-10D | HYD RIG PRESSURE LINE COUPLING | 4 | |
| 015567S5-12W | CONNECTIONS FOR HIGH PRESSURE HPU | 1 | |
| 01A1269-0020 | Towbar, Global Express | 1 | |
| 01TB0660TSEO | DIFERENTIAL PRESSURE INDICATOR TEST BLOCK | 1 | |
| 02-500-C | TYRE PRESSURE GAUGE | 1 | |
| 02-7935C0000 | Test Hydraulic Load and Pressure Relief Valve of Tripod Jacks | 4 | |
| 02/045D-TEWS-C | CLEANER, PRESSURE SOLVENT-WATER | 1 | |
| 021-922-011 | BLADE SEAL COMPRESSOR | 2 | |
| 022-3A | AIR PRESSURE HAMMER | 1 | |
| 023A022 | AIR/WATER REGULATER WITH PRESSURE GAUGES MEETS RPS 702 | 1 | |
| 02N2FP0087 | N2 PRESSURE GAUGUE 4000 PSI , ( 2.5 FACE,1/4” LM ) | 2 | |
| 02N2FP0093 | N2 PRESSURE GAUGUE 160 PSI , ( 1.5 FACE,1/8” CBM ) | 1 | |
| 02N2FP0095 | N2 PRESSURE GAUGUE 400 PSI , ( 2.5 FACE,1/4” LM ) | 1 | |
| 02N2FP0099 | N2 PRESSURE GAUGUE 5000 PSI , ( 2.5 FACE,1/4” CBM ) | 1 | |
| 02N2FP0107 | PRESSURE GAUGE | 1 | |
| 0379033P421 | PITOT PRESSURE ADAPTER | 1 | |
| 03A3LAS2A−DP | OIL FILL ADAPTOR GLOBAL EXPRESS | 1 | |
| 03A3LAS2A−DP−A | OIL FILL ADAPTOR GLOBAL EXPRESS | 3 | |
| 0440C-Z001 | TRAILER COMPRESSED | 1 | |
| 050-0000-0108-00 | ECT - 110 lb Electronic Compression Tester | 1 | |
| 050-0000-0109-00E | ELCTRNIC COMPRESSIN TESTR | 1 | |
| 050-1000-06C31-B | Socket - Tire Pressure Sensor,SmartStem | 5 | |
| 050-1125-12C47B | SOCKET TIRE PRESSURE SENSOR - SPL-11992 | 1 | |
| 054-0601-0000-99-384 | GAUGE TYRE PRESSURE | 1 | |
| 057-0750-00 | COMPRESSION STRAP WRENCH | 2 | |
| 057-0750-05 | COMPRESSION STRAP | 1 | |
| 057-0853-42 | FASTENING WRENCH FOR PRESSURE SEAL | 2 | |
| 057-0854-00 | WRENCH, FASTENING - PRESSURE SEALS | 2 | |
| 06-011 | GAUGE STRUT SERVICING LOW PRESSURE | 1 | |
| 06-11413-1 | HYDRALIC FLUID PRESSURE SOURCE | 1 | |
| 06-4005-0511 | COMPONENT PRESSURE TEST UNIT | 15 | |
| 06-4005-0520 | TEST UNIT: COMPONENT PRESSURE,3000PSI, HYD,.9GL,W | 2 | |
| 06-4005-0800 | Component Pressure Test Unit - 87257 / 23699 | 5 | |
| 06-4005-3611 | COMPONENT PRESSURE TEST UNIT | 12 | |
| 06-4035-3600 | HYDRAULIC TEST BENCH (PRESSURE OF 4500 PSI PLUS OR MINUS 200 PSI‐FOR USE WITH SKYDROL) | 10 | |
| 06-5004-0500 | HYDRAULIC PRESSURE BLEEDING EQUIPMENT (TRONAIR) | 8 | |
| 06-5010-6800 | FL SVC UNIT: HYD,VITON, W/HANDLE & PRESSURE GAUGE | 8 | |
| 06-5022-6500 | FLUID SERVICING UNIT, CAPACITY 2 GALLON, MAX. PRESS. 200 PSI FOR MINERAL BASE | 17 | |
| 06-5022-6800 | FLUID SERVICING UNIT, CAPACITY 2 GALLON, MAX. PRESS. 200 PSI FOR MINERAL BASE | 14 | |
| 06-5024-3610 | "CART - SKYDROL SERVICING: 55 GAL RESERVOIR. OPERATES OFF A COMPRESSED NITROGEN BOTTLE | 2 | |
| 06-5040-0510 | HYDRAULIC SERVICE UNIT HIGH PRESSURE | 2 | |
| 06-5043-3600 | PRESSURE FILL CART | 6 | |
| 06-5054-3600 | UNIT COMPRESSOR TEST | 6 | |
| 06-8082-6000 | Block,Press Rel Valve Test | 3 | |
| 06-8122-6000 | Kit, Pressure Relief Test | 4 | |
| 06.02799.2-01 | GAUGE, PRESSURE, LIQUID FILLED, 5000 PSI | 1 | |
| 060-E962-02 | DIGITAL PRESSURE GAUGE | 1 | |
| 060-E962-02 S0656926 | Cabin Pressure Multifunction Indicator | 1 | |
| 07-78691 | Dimpler Pressure Pad Dollies (Face diameter: 3/8") (Add to cart: Add To Cart) | 1 | |
| 07-78692 | Dimpler Pressure Pad Dollies (Face diameter: 3/8") (Add to cart: Add To Cart) (Face diameter: 1/2") (Add to cart: Add To Cart) | 1 | |
| 07-8018-4000 | Pressure Relief Tester | 1 | |
| 0781-0528 | HIGH PRESSURE REGULATOR | 1 | |
| 0781-0543 | TOOL - CUSHIONED PRESSURE REGULATOR | 1 | |
| 0781-9135 | LOW PRESSURE REGULATOR | 1 | |
| 08-13774 | TCM 6 CYLINDER SPRING COMPRESSOR TOOL | 1 | |
| 08-40-49-1011 | AIRCRAFT COMPRESSOR WASHING EQUIPMENT | 2 | |
| 08-4014-4010 | Engine Compressor Washer - 2 Gallon (Beech) - Aircraft connector assembly, no wand | 5 | |
| 08-404 | COMPRESSOR WASHER CART | 1 | |
| 08-4040-4010 | Engine Compressor Washer, Hand Carry, 2 1/2 Gallon - 22 in (56 cm) wand assembly with adjustable spr | 7 | |
| 08-4040-4010 | PORTABLE ENGINE COMPRESSOR WASHERS | 7 | |
| 08-4044-0010 | Engine Compressor Washer | 6 | |
| 08-4044-0010-A2 | Engine Compressor Washer | 4 | |
| 08-4044-0010A2 | ENGINE COMPRESSOR WASHER, | 4 | |
| 08-4048-0010 | ENGINE COMPRESSOR WASHER | 1 | |
| 08-4048-0013 | Engine Compressor Washer (Ce) | 8 | |
| 08-4048-0013 | ENGINE COMPRESSOR WASHER CART (CE) | 8 | |
| 08-4048-1011 | Engine Compressor Washer | 3 | |
| 08-4048-1012 | WASHER, ENGINE COMPRESSOR | 2 | |
| 08-4048-1013 | ENGINE COMPRESSOR WASHER (CE | 3 | |
| 08-4049-0013 | Engine Compressor Washer (Ce) | 12 | |
| 08-4049-0013-A1 | PRESSURE CLEANER, SOLVENT WATER | 2 | |
| 08-4049-011 | WASHER COMPRESSOR | 1 | |
| 08-4049-1011 | TRONAIRî ENGINE COMPRESSOR WASHER | 2 | |
| 08-4049-1012 | WASHER, ENG COMPRESSOR | 3 | |
| 08-4049-1012-41 | PRESSURE CLEANER,SOLVENT WATER | 1 | |
| 08-4049-1012-A1 | PRESSURE CLEANER, SOLVENT WATER | 1 | |
| 08-4049-1012-Al | PRESSURE CLEANER | 1 | |
| 08-4049-1013 | WASHER: COMPRESSOR,ENGINE, CE | 2 | |
| 08-4049C0013 | PORTABLE HP COMPRESSOR | 1 | |
| 08-4049−0013 | ENGINE COMPRESSOR WASH | 12 | |
| 08-4052-0013 | Engine Compressor Washer (Ce) | 1 | |
| 08-4052-1010 | ENGINE COMPRESSOR WASHER, | 1 | |
| 08-4053-0013 | Engine Compressor Washer (Ce) | 6 | |
| 08-40530013 | AIRCRAFT COMPRESSOR WASHING EQUIPMENT | 6 | |
| 08-4054-0010 | Engine Compressor Washer | 1 | |
| 08-4058-0013 | Engine Compressor Washer. Sikorsky (Ce) - 12 Gallon Tank Capacity - No wand, hose attachment | 4 | |
| 08-4059-0013 | ENGINE COMPRESSOR WASHER (12 GALLON) | 1 | |
| 08-4060-6700 | Engine Compressor Washer - 3 Gallon (Ce) | 4 | |
| 08-4949-0013 | ENGINE COMPRESSOR WASHER | 1 | |
| 084048-1012 | COMPRESSOR WASH TROLLY | 2 | |
| 0872-1SB | 12M HIGH PRESS HOSE 4500 PSI | 1 | |
| 0884FY-04 | PRESSURE TEST ADAPTER | 1 | |
| 0884HV | PITOT / STATIC PRESSURE TEST ADAPTERS (PTA) | 1 | |
| 08T4049-0013 | Engine Compressor Washer (Ce) | 7 | |
| 0ACH4 | DEVICE - TEST, THSA PRESSURE OFF BRAKE | 1 | |
| 0S22243 | PRESSING GUIDE | 1 | |
| 0S22457 | PRESSING TOOL | 1 | |
| 0S22458 | PRESSING TOOL | 1 | |
| 0S22467 | PRESS IN GUIDE | 1 | |
| 0S22469 | PRESS IN GUIDE | 1 | |
| 0S22471 | PRESS IN GUIDE | 1 | |
| 0S22472 | PRESS IN GUIDE | 1 | |
| 0S22473 | PRESS IN GUIDE | 1 | |
| 0S22474 | PRESS IN GUIDE | 1 | |
| 0S22475 | PRESS IN GUIDE | 1 | |
| 0S22476 | PRESS IN GUIDE | 1 | |
| 0S22479 | PRESS IN GUIDE | 1 | |
| 0S22480 | PRESS IN GUIDE | 1 | |
| 0S22481 | PRESS IN GUIDE | 1 | |
| 0S22489 | PRESS IN GUIDE | 1 | |
| 0S22829 | TOOL COMPRESSION | 1 | |
| 0S22959 | LOCK-PRESSURIZATION VALVE,REAR,AL | 15 | |
| 0S22975 | DUMP VALVE PRESSURIZATION VALVE BLOCK TOOL EMB-120 | 1 | |
| 0U129185 | PRESSURE UNION | 1 | |
| 0U133754 | LOW PRESSURE TEST MOUNTING | 1 | |
| 0U147358 | TOOL-COMPRESSION | 1 | |
| 0U147363 | COMPRESSION TOOL | 1 | |
| 0U190844 | DEPRESSION THS | 29 | |
| 0U191208 | RACK-PRESSURE | 1 | |
| 0U191559-210 | LOW PRESSURE TEST TOOL | 1 | |
| 0U191562 | TEST PRESSURE TOOL | 1 | |
| 0U191771 | HIGH PRESSURE TEST BENCH | 1 | |
| 0U191807 | PRESSURE TOOL | 1 | |
| 0U191808 | PRESSURE TOOL | 1 | |
| 0U300098 | COMPRESSION TOOL | 1 | |
| 0U300743 | COMPRESSION TOOL | 1 | |
| 0U300765 | DEVICE - TEST, THSA PRESSURE OFF BRAKE | 7 | |
| 0U300959 | HYDRAULIC PRESS | 1 | |
| 0U300993 | CRIMPING PRESS | 1 | |
| 0U301042 | HYDRAULIC PRESS | 1 | |
| 0U301141 | COMPRESSION TOOL | 1 | |
| 0U301271 | COMPRESSION TOOL | 1 | |
| 1-06868A | COMPRESSION SPRING(ST 025535) | 1 | |
| 1-1038-02-109 | PRESSURE ADPATER | 1 | |
| 1-15281 | 336A PRESSURE REGULATOR | 1 | |
| 1-25455 | ROUND HEAD COMPRESSION RIVETER | 1 | |
| 1.63MM PRESSUREGAUGE | PRESSURE GAUGE | 1 | |
| 10 INH20 | Pressure Indicator | 1 | |
| 10 PSI | PRESSURE GAUGE TOOL | 1 | |
| 10 XHBU-SS | ADAPTER - PRESSURE (5/8-INCH FLARELESS FITTING AT ONE END AND 5/8-INCH | 5 | |
| 10-10525 | TEST - DEAD WEIGHT HYD PRESS GAGE | 1 | |
| 10-3223-44 | HYDRAULIC PRESS BRAKE INDICATOR | 1 | |
| 10-40 | GAUGE-PRESSURE,PSI 5100 | 8 | |
| 10-SGE4110 | PRESSURE GAUGE TOOL | 1 | |
| 10.406.040K | PRESSURE GAUGE 0-5800PSI | 1 | |
| 100-0081-9 | PRESSURE GAGE PLUG | 1 | |
| 100-0484-02 | VALVE FUEL, PRESSURIZING & DRAIN | 1 | |
| 100-1008AL-02L | TIRE PRESSURE GAUGE | 1 | |
| 100-415 | RECHARGE (PRESSURIZING) ADAPTER | 1 | |
| 100-47813 | GEAR LOCK FIXTURE, PRESSURE TEST | 1 | |
| 10000PSI | PRESSURE GAUGE TOOL | 1 | |
| 10012-10 | MLG BRAKE PRESSURE TEST SET | 1 | |
| 1001246-3 | BLEED PRESS | 2 | |
| 1001246-X | Pressure Valve | 1 | |
| 10013677-S5 8-2 | TEST PLUG, LOW PRESSURE OUTLET (LOW PRESSURE RELIEF TEST) | 1 | |
| 10013677-S5 8-3 | TEST PLUG, LOW PRESSURE OUTLET (LEAKAGE TESTING) | 1 | |
| 10013677-S5 8-4 | TEST PLUG, LOW PRESSURE OUTLET (LEAKAGE TESTING) | 1 | |
| 10013677-S5 8-5 | TEST TOOL, (LOW PRESSURE RELIEF TEST) | 1 | |
| 10013677-S58-2 | TEST PLUG, LOW PRESSURE OUTLET (LOW PRESSURE | 1 | |
| 10013677-S58-3 | TEST PLUG, LOW PRESSURE OUTLET (LEAKAGE TESTING) | 1 | |
| 10013677-S58-4 | TEST PLUG, LOW PRESSURE OUTLET (LEAKAGE TESTING) | 1 | |
| 10013677-S58-5 | TEST TOOL, (LOW PRESSURE RELIEF TEST) | 1 | |
| 10020-10-30PSI | MANOMETER PRESSURE GAUGE | 2 | |
| 1002896-1 | SPRING, HELICAL, COMPRESSION | 4 | |
| 10046331-001 | GAUGE, 5000 PSI PRESSURE - MFG: NAT | 1 | |
| 1005-101 | PRESSURE GAUGE CONNECTOR | 2 | |
| 1005SWATER | PRESSURE GAGE (WATER 0-100PSI) | 1 | |
| 100682-1 | COMPRESSOR SCREW | 1 | |
| 1007-3 | PRESSURE GAUGE | 4 | |
| 1007-4 | GAUGE - PRESSURE | 2 | |
| 1008 | PRESSURE GAUGE (ASHCROFT) | 1 | |
| 1008A 0-1000PSI 4IN | PRESSURE GAUGE ASHCRAFT MODEL NO 1008/AL | 1 | |
| 1008A 0-150PSI 4IN | PRESSURE GAUGE ASHCRAFT MODEL NO 1008/AL | 1 | |
| 1008A 0-3000PSI 2.5IN | PRESSURE GAUGE ASHCRAFT MODEL NO 1008/AL | 1 | |
| 1008A 0-3000PSI 4IN | PRESSURE GAUGE ASHCRAFT MODEL NO 1008/AL | 1 | |
| 1008A 0-300PSI 4IN | PRESSURE GAUGE ASHCRAFT MODEL NO 1008/AL | 1 | |
| 1008A 0-5000PSI 2.5IN | PRESSURE GAUGE ASHCRAFT MODEL NO 1008/AL | 1 | |
| 1008A 0-500PSI 2.5IN | PRESSURE GAUGE ASHCRAFT MODEL NO 1008/AL | 1 | |
| 1008A 0-500PSI 4IN | PRESSURE GAUGE ASHCRAFT MODEL NO 1008/AL | 1 | |
| 1008A-BFE | PRESSURE GAUGE (HP) | 1 | |
| 1008ABEN | PRESSURE GAUGE (0-300PSI) | 1 | |
| 1009 | ANALOG 0-300 PSI PRESSURE GAUGE | 1 | |
| 1009SWL | PRESSURE GAUGE | 1 | |
| 100PSIG | PRESSURE GAUGE TOOL | 1 | |
| 101 PSI | PORTABLE AIR COMPRESSOR (7 BAR) | 1 | |
| 101-000000/934 | TORQUE SYSTEM PRESSURE TESTER (WITH 0-100 INSP. GAGE) | 3 | |
| 101-00184-A0A | TESTER - PITOT-STATIC PRESSURE (115/220 V) | 4 | |
| 101-00185-465 | TESTER: PRESSURE,PIT0T STATIC, | 7 | |
| 101-00211 | PRESSURE TESTER | 1 | |
| 101-00212 | Pressure Tester | 9 | |
| 101-01175 | TESTER - PITOT STATIC PRESSURE HIGH PRECISION | 9 | |
| 101-38001B-3 | CABIN PRESSURE SOLENOID VALVE | 1 | |
| 101-38028/935 | BOROMATIC PRESSURE SWITCH TEST BOX | 1 | |
| 101-384028-1 | TEST BOX AND ADAPTER HARNESS BAROMETRIC PRESSURE SWITCH | 1 | |
| 101-384028-1/935 | BAROMETRIC PRESSURE SWITCH TEST BO | 3 | |
| 101-384028/935 | BAROMETRIC PRESS. SWITCH TEST BOX AND ADAPTER HARN | 1 | |
| 101-389023-7 | TRANSDUCER OIL PRESSURE | 1 | |
| 10155-2-3 SR2182 | GAUGE TIRE PRESSURE | 1 | |
| 1017-000 | High Pressure Hose | 1 | |
| 101FTM04B21 | PRESSURE GAUGE 0-100 PSI | 1 | |
| 1020928-1 | ACTUATOR-LOW PRESSURE COMPRESOR STA | 1 | |
| 10269-05314 | 0-400 PSI GAUGE - TIRE PRESSURE | 1 | |
| 10292N | PRESSURE REGULATOR | 1 | |
| 1030-23 | VALVE, RELIEF, HYDRAULIC PRESS Â | 3 | |
| 1032-5 | VALVE, RELIEF HYDRAULIC PRESSU Â | 1 | |
| 105-14101 W18 | PRESSING-IN TOOL | 1 | |
| 105-14101 W7 | PRESSING-IN TOOL | 1 | |
| 105-14101W18 | PRESS TOOL | 1 | |
| 105-14101W18/PHP | PRESSING-IN TOOL | 1 | |
| 105-14101W7 | PRESSING-IN TOOL | 1 | |
| 105-14110 W2 | PRESSING-IN TOOL | 1 | |
| 105-14181 W2 | PRESSING-IN TOOL | 1 | |
| 105-14181 W7 | PRESSING-IN TOOL | 1 | |
| 105-21832 W1 | PRESSING-IN TOOL | 1 | |
| 105-31501W2 | PRESSING-IN AND PUSHING-OUT DEVICE | 1 | |
| 105-31702W25 | PRESSING TOOL | 1 | |
| 105-31702W4 | PRESSING IN PUSHING OUT TOOL | 1 | |
| 105-42121 W4 | PRESSING-IN TOOL | 1 | |
| 105-42121 W5 | PRESSING-IN TOOL | 1 | |
| 105-42121W4 | PRESSING TOOL | 1 | |
| 105-42121W5 | PRESSING-IN TOOL | 1 | |
| 105-42124W3 | PRESSING-IN TOOL | 1 | |
| 105-45000 W2 | PRESSURE TEST LINE | 1 | |
| 105-45000W2 | PRESSURE TEST LINE | 1 | |
| 1056-S4 | LEVER GREASE GUN - LEVER, 10000 PSI MAXIMUM OPERATING PRESSURE, 16 OZ CAPACITY | 1 | |
| 10593-03550 | 4" PRESSURE GAUGE 0-10 PSI | 1 | |
| 1063 | TYRE PRESSURE GAUGE | 1 | |
| 1064 | GAGE,PRESSURE,DIAL | 1 | |
| 1068 | PRESSURE REGULATOR NITROGEN | 1 | |
| 1075 | "KIT CONTAINING A 10 FT. HOSE, GAUGE, AND FITTINGS. PRESSURE 0 TO 400 PSI | 2 | |
| 1076 | GAGE,PRESSURE,DIAL INDICATING | 1 | |
| 1082-00-20 | GAGE, HYDRAULIC PRESSURE: 0 TO 20 PSIG (138 KPAG) ,0 TO 100 PSIG (690 KPAG),0 TO 250 PSIG (1724 KPAG),0 TO 300 PSIG (2069 KPAG),0 TO 600 PSIG (4137 KPAG) AND 0 TO 5000 PSIG (34475 KPAG) | 1 | |
| 1082A | PRESSURE TEST GAUGE (100 PSI) | 1 | |
| 1084 | PRESSURE GAUGE (0-300 PSI) | 1 | |
| 109 -3600-40-101 | SPRAY GUN ENGINE COMPRESSOR WASH | 1 | |
| 109-0729-24-129 | PRESSURE TRANSDUCER | 1 | |
| 109-3600-04-301 | EQUIPMENT, PRESSURE TEST | 1 | |
| 109-3600-40-101 | SPRAY GUN, ENGINE COMPRESSOR WASH | 1 | |
| 1094-001C-1 | NITROGEN BOOSTER KIT ( SURPRESSEUR ) | 1 | |
| 10BAR | PRESSURE GAUGE TOOL | 1 | |
| 10C1014G01 | FIXTURE, LIFT/TURN COMPRESSOR ROTOR , AFT END AND HPT ROTOR, FWD END | 1 | |
| 10C1022G01 | ADAPTER SET ASSEMBLY PEDESTAL - COMPRESSOR REAR FRAME, | 1 | |
| 10C1024G02 | BRACKET SET, HANDLING - COMPRESSOR MID FLANGE (BRACKET SET) | 1 | |
| 10C1033 | PROTECTOR, FAN-SHAFT LOW PRESS | 1 | |
| 10C1033P01 | PROTECTOR, FAN SHAFT - LOW PRESSURE, | 1 | |
| 10C1035G06 | ADAPTER, LIFT-LOW PRESSURE COMPRESSOR | 1 | |
| 10C1051G01 | STAND, COMPRESSOR ROTOR AND HPT ROTOR, VERTICAL | 1 | |
| 10C1057P01 | PIN, ALIGNMENT – COMPRESSOR CASE | 1 | |
| 10C1072G01 | FIXTURE, DISASSEMBLY - HPT ROTOR/COMPRESSOR ROTOR (DISASSEMBLY FIXTURE) (SUPERSEDED BY 10C1072G02) | 1 | |
| 10C1072G02 | FIXTURE, DISASSEMBLY - HPT ROTOR/COMPRESSOR ROTOR (DISASSEMBLY FIXTURE) (SUPERSEDES 10C1072G01) | 1 | |
| 10C1077G01 | FIXTURE, LIFT – COMPRESSOR STATOR CASE, FRONT ASSEMBLY (CF34) | 1 | |
| 10C1090G01 | ADAPTER, TORQUE - HPT ROTOR TO COMPRESSOR ROTOR NUTS (TORQUE ADAPTER) | 1 | |
| 10C1153 | ADAPTER, PRESSURE CHECK-FUEL M | 1 | |
| 10C1221P02 | FIXTURE, NUT RUNNER - COMPRESSOR ROTOR AFT FLANGE (NUT RUNNER FIXTURE) | 1 | |
| 10C1401G01 | BORESCOPE GUIDE TUBE-LOW PRESSURE TURBINE SHROUD | 1 | |
| 10C1401P01 | BOROSCOPE GUIDE TUBEOW PRESSURE TURBINE SHROUD | 1 | |
| 10F | PRESSURE BLANK TOOL | 1 | |
| 10HXBU-SS | ADAPTER PRESSURE 5/8- INCH FLARELESS FITTING AT ONE END 5/8- INCH 37- DEGREE FLARED FITTING AT THE OTHER END | 1 | |
| 10M | PRESSURE BLANK TOOL | 1 | |
| 10M-3036 | CABIN PRESSURE VALVE TESTER | 1 | |
| 10M-3883 | Breather Pressure Check | 1 | |
| 10M-8703 | FUEL LINE AND SHROUND PRESS TEST | 1 | |
| 10MIT65B01231-1 | PRESSURE TEST PLUG - SHOCK STRUT ASSEMBLY, BODY LANDING GEAR | 1 | |
| 10MM | ADAPTER, 2E PRESSURE TESTER | 3 | |
| 10XHBU-SS | ADAPTOR PRESSURE 5/8 | 5 | |
| 11-10386 | TOOL, FERRULE PRESS | 1 | |
| 11-20-0179 | IDT - Manual Press | 1 | |
| 11-20-0314 | IDT - Manual Press For Ribbon Cable | 1 | |
| 11-20-0436 | IDT - Manual Press | 1 | |
| 11-20-0815 | IDT - Manual Press | 1 | |
| 11-20-1163 | IDT - Manual Press | 1 | |
| 11-20-1164 | IDT - Manual Press | 1 | |
| 11-20-1165 | IDT - Manual Press | 1 | |
| 11-20-1168 | IDT - Manual Press | 1 | |
| 11-20-1169 | IDT - Manual Press | 1 | |
| 11-20-1170 | IDT - Manual Press | 1 | |
| 11-20-1270 | IDT - Manual Press | 1 | |
| 11-20-1271 | IDT - Manual Press | 1 | |
| 11-20-1272 | IDT - Manual Press | 1 | |
| 11-20-1273 | IDT - Manual Press | 1 | |
| 11-20-1274 | IDT - Manual Press | 1 | |
| 11-20-1277 | IDT - Manual Press | 1 | |
| 11-20-1278 | IDT - Manual Press | 1 | |
| 11-20-1286 | IDT - Manual Press | 1 | |
| 11-20-1298 | IDT - Manual Press | 1 | |
| 11-20-1317 | IDT - Manual Press | 1 | |
| 11-20-1327 | IDT - Manual Press | 1 | |
| 11-202 | PRESSING TOOL | 1 | |
| 11-21-0679 | IDT - Manual Press | 1 | |
| 11-21-9507 | Manual Press with Ferrule Adapter Kit | 1 | |
| 11-21-9757 | IDT - Manual Press | 1 | |
| 11-21-9963 | IDT - Manual Press | 1 | |
| 11-31-6356 | IDT - Manual Press | 1 | |
| 11-6924-1 | PRESSING TOOL | 1 | |
| 11-818-999 | PRECISION PRESSURE REGULATOR (NORGREN) | 1 | |
| 11-9600 | PRESSURIZED VARIABLE BALL GAP | 1 | |
| 11-970 | PRESSING TOOL | 1 | |
| 110111-36 | TOOL-DPRESS, TEST-O2 | 8 | |
| 11026-0 | TESTER PRESSURIZED CABIN | 1 | |
| 1106569-2 | Pressure Seal Remover Fixture | 1 | |
| 111 11 68 4000 | PRESSURE GAUGE(0-4000 PSI) | 1 | |
| 111-1-1100 | PRESSURE SWITCH | 1 | |
| 111.11.68.4000 | PRESSURE GAUGE, 0400-4000 PSI | 1 | |
| 1120-31502 W1 | PRESSING-IN AND PUSHING-OUT DEVICE | 1 | |
| 1120-31502W1 | PRESSING-IN/ PUSHING-OUT DEVICE | 1 | |
| 1120-31502W1/PHP | PRESSING-IN/ PUSHING-OUT DEVICE | 1 | |
| 1120-31547W1 | PRESSING-IN TOOL | 1 | |
| 1125-21-30-00 | Cabin pressure control sest set | 1 | |
| 1125-2130-00 | Astra Cabin Pressure Control Tester | 1 | |
| 1133-1 | Pressure Switch | 3 | |
| 1133-54 | ADAPTOR-PRESS | 1 | |
| 1134400-13 | COMPRESSOR ASSY(VCCS) | 1 | |
| 114-1035 | SHIMS FOR HIGH-PRESSURE LEAK TEST | 1 | |
| 114-151-1 | COMPRESSION RIVETING PEEN | 3 | |
| 114-151-2 | COMPRESSION RIVETING ANVIL | 3 | |
| 114-1604 | HIGH-PRESSURE LEAK TEST SHIMS | 1 | |
| 114-202-1 | COMPRESSION RIVETING ANVIL TOOL | 1 | |
| 114-202-2 | COMPRESSION RIVETING PEEN TOOL | 1 | |
| 114-212-1 | Pressure Plate Assembly Fixture | 1 | |
| 114-212-2 | Pressure Plate Assembly Fixture | 1 | |
| 114-212-3 | Pressure Plate Assembly Fixture | 1 | |
| 114-231 | COMPRESSION TOOL | 2 | |
| 114-263 | PRESSURE RELIEF VALVE PENETRATION TEST TOOL | 5 | |
| 114-290 | RETURN SPRING COMPRESSION TOOL | 1 | |
| 114-291 | RETURN SPRING COMPRESSION TOOL | 2 | |
| 114-330 | HIGH-PRESSURE LEAK TEST SHIMS | 1 | |
| 114-331 | Shims for high pressure leak test | 1 | |
| 114-374 | SHIMS FOR HIGH-PRESSURE LEAK TEST | 2 | |
| 114-416 | SHIM TOOL FOR HIGH PRESSURE LEAK TEST | 1 | |
| 114-433 | SHIMS FOR HIGH-PRESSURE LEAK TEST | 1 | |
| 114-759-2 | IMPRESSION STAMP | 1 | |
| 114160659-CT | COMPRESS TOOL | 1 | |
| 11439-00 | STRAIN GAUGE PRESSURE SWITCH TEST TOOL CONTAINED IN PACK P/N 12088-00 | 1 | |
| 1147 | HIGH PRESSURE GREASE GUN | 3 | |
| 114TAA | COMPRESSION RIVETER-ALLIGATOR | 1 | |
| 114TCC | COMPRESSION RIVETER-C TYPE | 1 | |
| 115-555023-7 | SHIM FOR FREON COMPRESSOR | 1 | |
| 1153-100 | SWITCH, FUEL PRESSUR | 2 | |
| 115609-109 | REGULATOR-PRESSURE | 1 | |
| 1159FTESK0004 | AIR PRESSURE REGULATOR BOX | 1 | |
| 1159GSE50516-201 | CABIN PRESSURIZATION CONTROL BREAKOUT BOX | 1 | |
| 1159SEAV20870-201 | CABIN PRESSURE BREAKOUT BOX | 1 | |
| 1159SEM20375-1 | PRESSURE GUN WITH NOZZLE | 6 | |
| 1168-30ST | SPRING COMPRESSOR TOOL (3 IT) | 1 | |
| 117-11130W1 | TOOL; PUSH OUT/PRESS IN | 1 | |
| 117-15004-W6 | PRESSING TOOLS | 1 | |
| 117-15004W6 | PUSH OUT / PRESS IN TOOL | 1 | |
| 117-15004W6/PHP | PUSHING OUT/ PRESSING IN TOOL | 1 | |
| 117-30002W2 | PRESSING TOOL | 1 | |
| 117-44115W1 | PRESSING-IN TOOL | 1 | |
| 1182DF2AAA20 | DIFFERENTIAL PRESSURE TRANSDUCER (VIATRAN) ± 5000 PSID (± 34474 KPA DIFFERENTIAL) | 1 | |
| 11941D100 | FUEL TANK PRESSURE TEST SET | 1 | |
| 11B36-11930 | TOOL, 16WR PLUG, PRESSURE SWITCH, A320 | 1 | |
| 11C3074 | TOOL KIT - DUMMY BOLT-COMPR DISCH PRESS SEAL/SP - STG 6-10 | 1 | |
| 11C3133 | FIXTURE - LOCK-HP COMPRESSOR ROTOR | 1 | |
| 11C3189 | PROTECTOR - HP COMPR RTR COMPR DISCH PRESSURE SEAL | 1 | |
| 11C3259P02 | DUMMY, COMPRESSOR DISCHARGE PRESSURE SEAL | 1 | |
| 11C3293 | DUMMY - STATOR - HIGH PRESSURE STATOR ASSEMBLY | 1 | |
| 11C3384 | PROTECTOR - FORWARD COMPRESSOR SHAFT | 1 | |
| 11C3384P01 | PROTECTOR, FORWARD COMPRESSOR SHAFT | 1 | |
| 11C3416 | FIXTURE - NUT STARTER-SUPPORT TUBE - HP COMPRESSOR ROTOR | 1 | |
| 11C3426 | DOLLY - LOW PRESSURE TURBINE MODULE/MID SHAFT | 1 | |
| 11C3426G02 | DOLLY - LOW PRESSURE TURBINE MODULE/MID SHAFT | 1 | |
| 11C3479 | FIXTURE - PRESSURE | 1 | |
| 11C4266 | FIXTURE, LIFT - CTR OF GRAVITY LOW PRESSURE TURBINE | 1 | |
| 11C4413G06 | SPL-8265 - CLIP - BALANCE WEIGHT, LOW PRESSURE TURBINE | 1 | |
| 11C4566 | MANIFOLD PRESSURE CHECK TOOL SUPERCEDED BY G04 | 1 | |
| 11C4566G01 | ADAPTOR SET, MANIFOLD PRESSURE CHECK, FUEL | 1 | |
| 11C4566G02 | ADAPTOR SET, MANIFOLD PRESSURE CHECK, FUEL | 1 | |
| 11C4566G04 | ADAPTER SET, MANIFOLD PRESSURE CHECK-FUEL | 1 | |
| 11C4609G02 | SPL-8265 - CLIP - BALANCE WEIGHT, LOW PRESSURE TURBINE | 1 | |
| 11C4714 | FIXTURE, PRESS - INSTALLATION OUTER RETAINER, AIR ADAPTER | 1 | |
| 11C4716 | FIXTURE, PRESS | 1 | |
| 11C4729 | FIXTURE, PRESS - SEAL | 1 | |
| 11C4831G01 | SUMP CAVITY PRESSURE CHECK TOOL | 1 | |
| 12-01012 | DIFF PRESSURE TESTER UP TO 5" & INC 5" | 2 | |
| 12-02347 | DIFFERENTIAL PRESSURE TESTER | 1 | |
| 12-02560 | NICOPRESS SWAG TOOL 64-CGMP | 1 | |
| 12-03154 | AVIATION PISTON RING COMPRESSOR KIT | 2 | |
| 12-04809 | ATS CST173 PUSH ROD SPRING COMPRESSOR | 2 | |
| 12-05187 | DRAIN PRESSURE HOSE | 1 | |
| 12-05317 | PRESSURE CONTROLLER 0/40 BAR | 1 | |
| 12-05376 | TIRE PRESSURE GUAGE 400PSI | 1 | |
| 12-21520 | VALVE SPRING COMPRESSOR | 1 | |
| 12-3100-1000 | NITROGEN CART (WITH PRESSURE GAUGES AND REGULATORS) AND 2 NO NITROGEN BOTTLES | 5 | |
| 12-634-950 | GREASE GUN: 500CC, HAND LEVER OPERATED, M10 CONNECTION [PRESSOL] | 1 | |
| 1202BC5AAA20 | DIFFERENTIAL PRESSURE TRANSDUCER (VIATRAN) (5000 PSID (34474 KPAD)) | 1 | |
| 12063-400 | KIT INDICATORE DIFFERENZIALE ALTA PRESSIONE POST PTA 243 | 1 | |
| 12088-00 | STRAIN GAUGE PRESSURE SWITCH TEST TOOL TO-26-002 | 1 | |
| 12091-00 | STRAIN GAUGE PRESSURE SWITCH TEST TOOL TO-26-002 | 1 | |
| 1213873-2 | BATTERY;CHARGER;AUTOPRESS | 1 | |
| 1213875-1 | AUTOPRESS CRIMPING TOOL K | 3 | |
| 1213875-2 | AUTOPRESS CRIMPING TOOL KIT | 1 | |
| 12243YB-28-N-O | PRESS TO TEST CAP NVIS YELLOW CLB NO DIM | 1 | |
| 123 | AIRCRAFT PRESSURIZATION CART | 2 | |
| 1225 | PRESSURE SWITCH | 3 | |
| 123327-001 | PRESSURE MODULE | 1 | |
| 123SAV90385-1 | LIVE SENSOR, RADAR PRESSURE & COOL SYS | 1 | |
| 124 071 999 | ACS/LCS PRESSURE POT | 1 | |
| 1241007 MOD2 | PROP OIL PRESS IND | 1 | |
| 125-125KPA | DIFFERENTIAL PRESSURE GAUGE | 1 | |
| 1250234-6 | PRESSURE SWITCH | 1 | |
| 125248-009 | PRESSURE MODULE | 1 | |
| 12545-069-002 | PRESSURIZATION ADAPTER KIT | 1 | |
| 1266-100 | PRESSURE SWITCH | 2 | |
| 127-06-00 | PRESSURE GUAGE 0-472BARS | 1 | |
| 127-11-00 | GAUGE PRESSURE JACK | 1 | |
| 127-16-00 | GAUGE PRESSURE JACK | 1 | |
| 12A2203-1 | PRESSURE CHECK ADAPTER ASSEMBLY | 1 | |
| 12F | PRESSURE BLANK TOOL | 1 | |
| 12M | PRESSURE BLANK TOOL | 1 | |
| 12MM | ADAPTER, 2E PRESSURE TESTER | 1 | |
| 12XHBU-SS | ADAPTER - PRESSURE (3/4-INCH FLARELESS FITTING AT ONE END AND 3/4-INCH 37-DEGREE FLARED FITTING AT THE OTHER END) | 4 | |
| 13-00437 | PRESSURE GAGE | 1 | |
| 13-0522-1 | UNIT CABIN PRESSURE CONTROL | 4 | |
| 13-0822-1 | PRESSURE RELIEF TEST ASSY | 1 | |
| 130-9031-0001 | ENGINE COMPRESSSOR WASH EXTENDED DRAIN KIT | 1 | |
| 1303M20P01 | PRESSURE SENSOR | 1 | |
| 130522-1 | Cabin Pressure Controller | 4 | |
| 131.11 | BOURDON TUBE PRESSURE GAUGE STAINLESS STEEL COMPACT VERSION NS 40 (1 1/2"), 50 (2") AND 63 (2 1/2") | 1 | |
| 131.3004 | KUNZ HIGH PRESSURE HOSE | 1 | |
| 131.3830 | KUNZ HIGH PRESSURE HOSE | 1 | |
| 131402-2 | REGULATOR-AIR PRESSURE | 1 | |
| 1328LMT | SPRING COMPRESSOR | 1 | |
| 13292740-CAL | PRESSURE GAUGE 40 BAR / 580 PSI | 1 | |
| 133-0450-1133-0450-3 | COMPRESSOR ASSY REPAIR AND OVERHAUL | 1 | |
| 133-54 | PRESS ADAPTER | 1 | |
| 1370-100 | HYDRAULIC PRESSURE SWITCH | 1 | |
| 1377-1500 | PRESSURE GAUGE_(0 ~ 1500) PSI (10) ±0.5 %_[1377-1500] | 1 | |
| 138-534100 | TOOL-ESPRESSO SERVICING | 1 | |
| 1389-01 | PRESSURE DISC | 1 | |
| 1389-02 | PRESSURE DISC | 1 | |
| 13N456 | SPEEDAIRE 8 GAL. PORTABLE AIR COMPRESSOR /GENERATOR | 1 | |
| 14-68-4-6000 | PRESSURE REGULATOR VALVE | 1 | |
| 14-6804 | KIT, REGULATOR, HIGH PRESSURE NITROGEN | 3 | |
| 14-6804-6000 | REGULATOR, NITROGEN SERVICING (HIGH PRESSURE) | 22 | |
| 14-6804-6011 | GUAGE A/C TIRE PRESSURE (0 TO 300) PSI | 1 | |
| 14-6805-6010 | Gauge, A/C Strut Pressure | 20 | |
| 14-6805-6010A2 | GAUGE A/C STRUT PRESSURE | 2 | |
| 14-6806-6000 | PRESS GAGE | 1 | |
| 14-6806-6010 | GAUGE, A/C TIRE PRESSURE | 5 | |
| 14-6806-6011 | GAUGE - TIRE PRESSURE | 23 | |
| 14-6806-6011-A1 | Gauge, A/C Tire Pressure | 3 | |
| 14-6806-6011A1 | TIRE PRESSURE GAUGE | 3 | |
| 14-6806-6012 | TYRE PRESSURE GAUGE | 1 | |
| 14-6806-6030 | GAUGE, A/C TIRE PRESSURE (CE) | 3 | |
| 14-6807-6010 | AIRCRAFT TIRE PRESSURE GAUGE | 1 | |
| 14-6807-6011 | Gauge, A/C Tire Pressure (Ce) | 19 | |
| 14-6807-6011-A2 | GAUGE, A/C TIRE PRESSURE | 3 | |
| 14-6807-6011A2 | GAUGE: PRESSURE,TIRE,A/C,0-90PSI, | 3 | |
| 14-6807–6011 | A/C TIRE PRESSURE CH | 19 | |
| 14-6808-6000 | Regulator - Nitrogen Servicing (Low Pressure) | 17 | |
| 14-6808-6000 | REGULATOR, LOW PRESS NTRGN SERV | 17 | |
| 14-6808-6011 | TIRE PRESSURE GAUGE | 1 | |
| 14-6828-6000 | NITROGEN LOW PRESSURE | 1 | |
| 14-6829-6000 | REGULATOR-HIGH PRESS | 6 | |
| 14-6829-6000 | HIGH PRESSURE REGULATOR - SERVICING HIGH PRESSURE WITH CGA-680 | 6 | |
| 14-6830-6010 | PRESS GAGE | 1 | |
| 14-6830-6012 | Gauge, A/C Tire Pressure | 11 | |
| 14-6830−6012 | PRESS GAGE | 11 | |
| 14-6831-6010 | Gauge, A/C Strut Pressure | 11 | |
| 14-6833-6030 | GAUGE: AIR PRESSURE, | 7 | |
| 14-6877-6010 | TYRE PRESSURE GAUGE | 1 | |
| 14-6877-6011 | CHARGING AND GAUGING TIRE PRESSURE (0-300 PSI) | 1 | |
| 14-6877-6012 | Gauge, A/C Tire Pressure | 8 | |
| 14-6877-6015 | GAUGE TYRE PRESSURE | 1 | |
| 14-6884-6000 | TRONAIR NITROGEN SERVICE GAUGE ASSEMBLY, HIGH-PRESSURE NITROGEN 3000 PSI | 5 | |
| 14-6884-6011 | 0-300 PSI PRESSURE GAUGE | 1 | |
| 14-6895-6000 | Gauge, A/C Strut Pressure | 3 | |
| 14-6900-6000 | GAUGE: AIR PRESSURE, | 6 | |
| 14-6903-6000 | GAUGE: AIR PRESSURE,STRUT, | 4 | |
| 14-6921-6000 | GAUGE - TIRE PRESSURE | 5 | |
| 140-001 | PRESSURE GAUGE | 1 | |
| 140.9994.000 | PRESSURE GAUGE (BACK PRESSURE) | 1 | |
| 1403-4-5-0-60 | GAGE PRESSURE INDICATING DIAL | 1 | |
| 1404 | PRESSURE GAUGE 0-2000 | 1 | |
| 1404 SERIES | PRESSURE GAGE | 1 | |
| 1404 SERIES | PRESSURE GAUGE (0-2000PSIG) MINIMUM ACCURACY /- 0.25% FULL SCALE | 1 | |
| 1408-149690 | GAGE-PRESSURE | 1 | |
| 1408-44578 | GAGE-PRESSURE | 1 | |
| 1408-44579 | GAGE-PRESSURE | 1 | |
| 1408-44580 | GAGE-PRESSURE | 1 | |
| 1408-44581 | GAGE-PRESSURE | 1 | |
| 1408-44582 | GAGE-PRESSURE | 1 | |
| 1408-44583 | GAGE-PRESSURE | 1 | |
| 1408-44584 | GAGE-PRESSURE | 1 | |
| 1408-44585 | GAGE-PRESSURE | 1 | |
| 1408-50315 | GAGE-PRESSURE | 1 | |
| 1408-52513 | GAGE-PRESSURE | 1 | |
| 1408-78875 | GAGE-PRESSURE | 1 | |
| 1409-161947 | GAGE PRESSURE 0-30PSI | 1 | |
| 1409-161948 | GAGE PRESSURE 0-60PSI | 1 | |
| 1409-161949 | GAGE PRESSURE 0-100PSI | 1 | |
| 1409-161950 | GAGE PRESSURE 0-160 PSI | 1 | |
| 1409-161951 | GAGE PRESSURE 0-200 PSI | 1 | |
| 1409-161952 | GAGE PRESSURE 0-300 PSI | 1 | |
| 1409-161953 | GAGE PRESSURE 0-600 PSI | 1 | |
| 1409-161954 | GAGE PRESSURE 0-1000 PSI | 1 | |
| 1409-161955 | GAGE PRESSURE 0-1500 PSI | 1 | |
| 1409-161956 | GAGE PRESSURE 0-2000 PSI | 1 | |
| 1409-161957 | GAGE PRESSURE 0-3000 PSI | 1 | |
| 1409-161958 | GAGE PRESSURE 0-5000 PSI | 1 | |
| 141A4804-1 | PRESSURE SEAL | 1 | |
| 144-955-000-702 | ACCELEROMETER COMPRESSOR REAR FRAME | 2 | |
| 144880-11 | PRESS PAD | 1 | |
| 144880/11 | PRESS PAD | 1 | |
| 144883-11 | PRESS PAD | 1 | |
| 144883/11 | PRESS PAD | 1 | |
| 145-25-20D | CONNECTIONS FOR LOW PRESSURE HPU | 1 | |
| 1454M16G02 | . MANIFOLD-PRESS SENSING | 1 | |
| 145PSI | PRESSURE GAUGE TOOL | 1 | |
| 145S9-20D | PRESSURE PLUG | 4 | |
| 146805-6010 | GAUGE: AIR PRESSURE, | 20 | |
| 146806-6011 | TYRE PRESSURE GAUGE(EMB) | 23 | |
| 1473M38G18 | MANIFOLD-HIGH PRESSURE | 1 | |
| 148.00.8941.050.003 | PRESSURE GAUGE | 1 | |
| 148.00.8941.050.005 | PRESSURE GAUGE | 1 | |
| 148.00.8941.050.007 | PRESSURE GAUGE | 1 | |
| 148274-0-4501 | Press Tool | 1 | |
| 148274-0-4501 PM | PRESS TOOL | 1 | |
| 1490748-1 | 1" COMPRESSION TOOL | 2 | |
| 1490749-1 | 1 1/2" COMPRESSION TOOL | 4 | |
| 14B6801-0120 | HIGH PRESSURE PNEUMATIC TIRE BEAD BREAKER - TRONAIR | 5 | |
| 14MM | ADAPTER, 2E PRESSURE TESTER | 2 | |
| 14R113FC | REGULADOR PRESSAO PARKER 14R113FC | 1 | |
| 14‐6804‐6000 | Regulator, Nitrogen Servicing (High Pressure) | 22 | |
| 14‐6806‐6011 | Gauge ‐ Tire Pressure | 23 | |
| 14‐6808‐6000 | Regulator ‐ Nitrogen Servicing (Low Pressure) | 17 | |
| 14−6806−6011 | KIT - TIRE PRESSURE (0-300 PSI (0-2 068.44 KPA)) | 23 | |
| 14−6807−6011 | Charging and Gauging Tire Pressure | 19 | |
| 14−6808−6000 | Regulator − Low Pressure Nitrogen Service | 17 | |
| 14−6828−6000 | Kit − Charging and Gauging Low Pressure Nitrogen | 1 | |
| 15 X 7603-1000 | CABIN PRESSURIZATION TEST CART | 1 | |
| 15-7600-1000 | Cabin Pressurization Unit | 2 | |
| 15-7600-1000 (60 HZ) 15-7602-1000 (50 HZ) | CABIN PRESSURE UNIT (TRONAIR) | 1 | |
| 15-7600-1000 (60 HZ) 15-7602-1000 (50HZ) ADAPTER K-1285 | CABIN PRESSURIZATION UNIT | 1 | |
| 15-7602-1000 | CABIN PRESSURE UNIT (TRONAIR) | 1 | |
| 15-7602-1000-82 | TRON AIR PRESSURIZATION TESTER | 1 | |
| 15-7603-1000 | PRESS UNIT | 3 | |
| 15-7603-1000-80 (208VAC/60Hz) | CABIN PRESSURIZATION CART (OPTIONAL) | 1 | |
| 15-7603-1000-81 | CART, CABIN PRESSURIZATION (220VAC/60HZ) (FOR OTHER CONFIGURATIONS CONTACT TRONAIR)PRICED AFTER SELECTION. | 1 | |
| 15-7603-1000-81 (220VAC/60Hz) | CABIN PRESSURIZATION CART (ALTERNATE P/N) (OPTIONAL) | 1 | |
| 15-7603-1000-82 (440VAC/60HZ) | CABIN PRESSURIZATION CART (ALTERNATE P/N) (OPTIONAL) | 1 | |
| 15-7603-1000-83 (575VAC/60Hz) | CABIN PRESSURIZATION CART (ALTERNATE P/N) (OPTIONAL) | 1 | |
| 15-7603-1000-84 (200VAC/50Hz) | CABIN PRESSURIZATION CART (ALTERNATE P/N) (OPTIONAL) | 1 | |
| 15-7603-1000-85 | CART, CABIN PRESSURIZATION (220VAC/50HZ) (SEE TABLE BELOW UNDER NOTES) PRICED AFTER SELECTION. (OPTION) | 1 | |
| 15-7603-1000-85 (220VAC/50Hz) | CABIN PRESSURIZATION CART (ALTERNATE P/N) (OPTIONAL) | 1 | |
| 15-7603-1000-86 (380VAC/50HZ) | CABIN PRESSURIZATION CART (ALTERNATE P/N) (OPTIONAL) | 1 | |
| 15-7603-1000-86 (380VAC/50Hz) | CABIN PRESSURIZATION CART (ALTERNATE P/N) (OPTIONAL) | 1 | |
| 15-7603-1000-88 (440VAC/50Hz) | CABIN PRESSURIZATION CART (ALTERNATE P/N) (OPTIONAL) | 1 | |
| 15-7603-1000-89 (380VAC/60HZ) | CABIN PRESSURIZATION CART (ALTERNATE P/N) (OPTIONAL) | 1 | |
| 15-7603-1000-89 (380VAC/60Hz) | CABIN PRESSURIZATION CART (ALTERNATE P/N) (OPTIONAL) | 1 | |
| 15-7603-1000 | CABIN PRESSURE CART | 3 | |
| 15-7605-6000 | Cabin Pressure Tester | 2 | |
| 15-7605-6010 | CABIN PRESSURE TESTER | 5 | |
| 15-7609-6000 | TESTER: PRESSURE,CABIN, | 3 | |
| 15-7609-6000-FJ | CABIN PRESSURE TEST (TRONAIR) | 1 | |
| 15000 PSI Gauge | McDaniel Controls Inc Pressure 0 15000 PSI Gauge 316 SS Tube and socket | 1 | |
| 150052-1 | COMP LOW PRESS SENSR | 1 | |
| 1501507-5 | ELBOW ASSY, DUCTING COMPRESSOR BLEED AIR | 1 | |
| 1507 | AERO Specialties 2-bottle hand-movable aircraft OXYGEN service cart with high pressure regulator sys | 6 | |
| 150979-0-200 | Pin Press Tool | 1 | |
| 150979-0-200 PM | PIN PRESS TOOL | 1 | |
| 150PSI | PRESSURE GAUGE TOOL | 1 | |
| 151-243 | TIRE PRESS/INFLATOR CHECK GAUGE | 1 | |
| 151031-0-2000 | BEARING PRESS | 1 | |
| 151031-0-2000 PM | BEARING PRESS | 1 | |
| 151031-0-2002 | DOWEL PIN PRESS | 1 | |
| 151031-0-2002 PM | DOWEL PIN PRESS | 1 | |
| 151645-0-2000 | PIN PRESS SUPPORT | 1 | |
| 151645-0-2000 PM | PIN PRESS SUPPORT | 1 | |
| 151718-0-2000 | DOWEL PIN PRESS | 1 | |
| 151718-0-2000 PM | DOWEL PIN PRESS | 1 | |
| 151719-0-2000 | BEARING PRESS SUPPORT | 1 | |
| 151719-0-2000 PM | BEARING PRESS SUPPORT | 1 | |
| 151719-0-2001 | BEARING PRESS SUPPORT | 1 | |
| 151719-0-2001 PM | BEARING PRESS SUPPORT | 1 | |
| 151719-0-2002 | BEARING PRESS | 1 | |
| 151719-0-2002 PM | BEARING PRESS | 1 | |
| 151719-0-2003 | BEARING PRESS | 1 | |
| 151719-0-2003 PM | BEARING PRESS | 1 | |
| 151719-0-2004 | BEARING PRESS | 1 | |
| 151719-0-2004 PM | BEARING PRESS | 1 | |
| 151719-0-2007 | BEARING PRESS | 1 | |
| 151719-0-2007 PM | BEARING PRESS | 1 | |
| 151719-0-2008 | BEARING PRESS | 1 | |
| 151719-0-2008 PM | BEARING PRESS | 1 | |
| 151719-0-2009 | SEAL PRESS | 1 | |
| 151719-0-2009 PM | SEAL PRESS | 1 | |
| 151720-0-2001 | Tool,Seal Press | 1 | |
| 151720-0-2001 PM | TOOL, SEAL PRESS | 1 | |
| 151720-0-2002 | Press Tool For 148269 | 1 | |
| 151720-0-2002 PM | PRESS TOOL FOR 148269 | 1 | |
| 151720-0-2003 | Press Tool For 148270 | 1 | |
| 151720-0-2003PM | PRESS TOOL FOR 148270 | 1 | |
| 151720-0-2004 | Press Tool For 148271 | 1 | |
| 151720-0-2004 PM | PRESS TOOL FOR 148271 | 1 | |
| 151720-0-2005 | BEARING PRESS | 1 | |
| 151720-0-2005 PM | BEARING PRESS | 1 | |
| 151720-0-2006 | BEARING PRESS | 1 | |
| 151720-0-2006 PM | BEARING PRESS | 1 | |
| 151720-0-2007 | PRESS TOOL | 1 | |
| 151720-0-2007 PM | PRESS TOOL | 1 | |
| 151720-0-2008 | Bearing Press | 1 | |
| 151720-0-2008 PM | BEARING PRESS | 1 | |
| 151720-0-2009 | DOWEL PIN PRESS | 1 | |
| 151720-0-2009 PM | DOWEL PIN PRESS | 1 | |
| 151723-0-2000 | IDLER SHAFT SEAL PRESS | 1 | |
| 151723-0-2000 PM | IDLER SHAFT SEAL PRESS | 1 | |
| 151728-0-2008 | Bearing Press Base | 1 | |
| 151TA7 | HYD COMPRESSION TOOL | 1 | |
| 151TC | RIVETER-COMPRESSION,MODEL 151TC | 1 | |
| 152-1B | TURBINE-COMPRESSOR WASHER | 1 | |
| 152IN-15 | COMPRESSED GAS REGULATOR | 1 | |
| 153-3001 | PRESSURE GAUGE 15 TON TAIL JACK | 1 | |
| 153408X001 | PRESSURE GAUGE JACK | 1 | |
| 1544440AT5-101 | PRESSURE REDUCER VALVE REMOVAL TOOL | 1 | |
| 155-25-12W | CONNECTIONS FOR HIGH PRESSURE HPU | 1 | |
| 155012-12-2014 | (IG 01) HOSE ASSEMBLY, EDP PRESS | 2 | |
| 155012-12-21 | HOSE ASSY PRESSURE | 1 | |
| 155012-71-14 | (IG 01) DISCONNECT, STRUT, PRESSU | 4 | |
| 1552-002-19 | Press Regulator | 4 | |
| 1552-002-3 | REGULATOR PRESSURE | 2 | |
| 1552-002-9 | Press Regulator | 4 | |
| 1552002-9 | PRESSURE REGULATOR | 4 | |
| 155S7-12D | PRESSURE CAP [DUST CAP | 3 | |
| 157-7600-1000 | CABIN PRESSURIZATION UNIT | 1 | |
| 15720-103 | GAUGE # GAUGE,PRESS.MONITORING - 1ST | 1 | |
| 15721-103 | GAUGE # GAUGE - PRESSURE 2ND STAGE | 1 | |
| 1576 | OXYGEN PRESSURE GAUGES | 1 | |
| 15782-101 | PRESSURE SWITCH | 1 | |
| 1587 | 1 Bottle Nitrogen Low/High Pressure Regulator System | 8 | |
| 15A-7603-1000 | CABIN PRESSURIZATION TEST CART TRONAIR | 6 | |
| 15A7602-1000 | CABIN PRESSURE UNIT 208VAC 60, | 1 | |
| 15A7603-1000 | Cabin Pressurization Unit | 6 | |
| 15A7603-1000 (208VAC/60HZ) | CABIN PRESSURIZATION CART | 1 | |
| 15A7603-1000 (208VAC/60Hz) | CABIN PRESSURIZATION CART | 1 | |
| 15A7606-1000 | Cabin Pressurization Unit | 1 | |
| 15A7607-1000 | Cabin Pressurization Unit | 1 | |
| 15A7608-0000 | Cabin Pressurization Unit | 1 | |
| 15B7602-1000 | CABIN PRESSURE UNIT 230VAC 60, | 1 | |
| 15B7603-1000 | Cabin Pressurization Unit | 6 | |
| 15B7603-1000 (230VAC/60Hz) | CABIN PRESSURIZATION CART (ALTERNATE P/N) | 1 | |
| 15B7606-1000 | UNIT,PRESSURIZATION TEST | 5 | |
| 15B7607-1000 | Cabin Pressurization Unit | 1 | |
| 15B7608-000 | CABIN PRESSURE UNIT, | 1 | |
| 15B7608-0000 | Cabin Pressurization Unit | 1 | |
| 15C7602-1000 | CABIN PRESSURE UNIT 380VAC 60, | 1 | |
| 15C7603-1000 | Cabin Pressurization Unit | 4 | |
| 15C7603-1000 (380VAC/60Hz) | CABIN PRESSURIZATION CART (ALTERNATE P/N) | 1 | |
| 15C7606-1000 | Cabin Pressurization Unit | 1 | |
| 15C7607-1000 | Cabin Pressurization Unit | 1 | |
| 15C7608-0000 | Cabin Pressurization Unit | 1 | |
| 15CN110BP25B1B11 | MEDIUM PRESSURE FILTER | 1 | |
| 15D7602-1000 | CABIN PRESSURE UNIT 460VAC 60, | 1 | |
| 15D7603-1000 | Cabin Pressurization Unit | 5 | |
| 15D7603-1000 (460VAC/60Hz) | CABIN PRESSURIZATION CART (ALTERNATE P/N) | 1 | |
| 15D7606-1000 | Cabin Pressurization Unit | 1 | |
| 15D7607-1000 | Cabin Pressurization Unit | 1 | |
| 15D7608-0000 | Cabin Pressurization Unit | 1 | |
| 15D7608-0001 | Aircraft Cabin Pressurization Unit | 1 | |
| 15E7602-1000 | CABIN PRESSURE UNIT 575VAC 60, | 1 | |
| 15E7603-1000 | Cabin Pressurization Unit | 2 | |
| 15E7603-1000 (575VAC/60Hz) | CABIN PRESSURIZATION CART (ALTERNATE P/N) | 1 | |
| 15E7606-1000 | Cabin Pressurization Unit | 1 | |
| 15E7607-1000 | Cabin Pressurization Unit | 1 | |
| 15E7608-0000 | Cabin Pressurization Unit | 1 | |
| 15F7602-1000 | CABIN PRESSURE UNIT 200VAC 50, | 1 | |
| 15F7603-1000 | Cabin Pressurization Unit | 4 | |
| 15F7603-1000 (200VAC/50Hz) | CABIN PRESSURIZATION CART (ALTERNATE P/N) | 1 | |
| 15F7606-1000 | Cabin Pressurization Unit | 1 | |
| 15F7607-1000 | Cabin Pressurization Unit | 1 | |
| 15F7608-0000 | Cabin Pressurization Unit | 1 | |
| 15G7602-1000 | CABIN PRESSURE UNIT 220VAC 50, | 1 | |
| 15G7603-100 | CABIN PRESSURIZATION CART (220VAC/50HZ) | 1 | |
| 15G7603-1000 | Cabin Pressurization Unit | 6 | |
| 15G7603-1000 (220VAC/50HZ) | PRESSURE UNIT | 1 | |
| 15G7603-1000 (220VAC/50Hz) | CABIN PRESSURIZATION CART (ALTERNATE P/N) | 1 | |
| 15G7603-1000(220VAC/50HZ) | PRESSURE UNIT | 1 | |
| 15G7603−1000 | CABIN PRESSURIZATION CART (220VAC/50HZ) | 6 | |
| 15G7606-1000 | UNIT,PRESSURIZATION TEST | 2 | |
| 15G7606-1000 | UNIT,PRESSURIZATION TEST | 2 | |
| 15G7607-1000 | Cabin Pressurization Unit | 1 | |
| 15G7608-0000 | Cabin Pressurization Unit | 1 | |
| 15H7602-1000 | CABIN PRESSURE UNIT 380VAC 50, | 1 | |
| 15H7603-1000 | Cabin Pressurization Unit | 8 | |
| 15H7603-1000 (380VAC/50HZ) | CABIN PRESSURIZATION CART (ALTERNATE P/N) | 1 | |
| 15H7603-1000 (380VAC/50Hz) | CABIN PRESSURIZATION CART (ALTERNATE P/N) | 1 | |
| 15H7603−1000 | CABIN PRESSURIZATION CART (380VAC/50HZ) | 8 | |
| 15H7606-1000 | Cabin Pressurization Unit | 3 | |
| 15H7607-1000 | Cabin Pressurization Unit | 1 | |
| 15H7608-0000 | Cabin Pressurization Unit | 1 | |
| 15J7602-1000 | CABIN PRESSURE UNIT 415VAC 50, | 1 | |
| 15J7603-1000 | Cabin Pressurization Unit | 4 | |
| 15J7603-1000 (415VAC/50HZ) | CABIN PRESSURIZATION CART (ALTERNATE P/N) | 1 | |
| 15J7603-1000 (415VAC/50Hz) | CABIN PRESSURIZATION CART (ALTERNATE P/N) | 1 | |
| 15J7603-1000 (415VAC/50hZ) Old P/N: 15-7603-1000-87 (415VAC/50Hz) | CABIN PRESSURIZATION CART (ALTERNATE P/N) | 1 | |
| 15J7606-1000 | Cabin Pressurization Unit | 1 | |
| 15J7607-1000 | Cabin Pressurization Unit | 1 | |
| 15J7608-0000 | Cabin Pressurization Unit | 1 | |
| 15K7602-1000 | CABIN PRESSURE UNIT 440VAC 50, | 1 | |
| 15K7603-1000 | Cabin Pressurization Unit | 5 | |
| 15K7603-1000 (440VAC/50Hz) | CABIN PRESSURIZATION CART (ALTERNATE P/N) | 1 | |
| 15K7606-1000 | Cabin Pressurization Unit | 1 | |
| 15K7607-1000 | Cabin Pressurization Unit | 1 | |
| 15K7608-0000 | Cabin Pressurization Unit | 1 | |
| 15KCSA | HTS-15KCSA-12.5 15KCSA COMPRESSION RIVETER '-YOKE | 1 | |
| 15PSI1 | PRESSURE GAUGE TOOL | 1 | |
| 15X7603-1000 | CABIN PRESSURIZATION TEST CART, | 1 | |
| 16 BAR | PRESSURE GAUGE | 1 | |
| 16 SERIES - 16112J | LOW PRESSURE REGULATOR | 1 | |
| 16-0803 | PRESSURE GAUGE | 1 | |
| 160PSI | PRESS GAUGE TOOL | 1 | |
| 160PSIG | AIR PRESSURE GAUGE TOOL | 1 | |
| 1610000F18 | COMPRESSION TOOL | 1 | |
| 16112J | LOW PRESSURE REGULATOR 16 SERIES (VAC TO 2 PSIG) | 1 | |
| 16112J LOW | LOW PRESSURE REGULATOR | 1 | |
| 161949X | PRESSURE GAUGE | 1 | |
| 161U1005-6 | SUPPORT ASSY - TIRE PRESSURE INDICATING SYS | 1 | |
| 1622M24P01 | PLUG, MACHINE THREAD DRESSER HIGH PRESSURE COMPRESSOR STATOR BREAKDOWN | 1 | |
| 162404-1 | M/R ACTUATOR PRESSURE SWITCH SPECIAL WRENCH | 1 | |
| 162660 -2 | PRESSURE SWITCH | 1 | |
| 164262A | 0-600 PSI PRESSURE GAUGE | 1 | |
| 1651 | VALVE # VALVE-PRESS RELIEF A-SYSTEM | 12 | |
| 1652 | CARTRIDGE PRESSURE RELIEF VALVE | 4 | |
| 167E.18 | NOSE "COMPRESSION" PLIERS | 1 | |
| 169E.18 | NOSE "COMPRESSION" PLIERS | 1 | |
| 16A12001-1 | NET CABIN PRESS | 1 | |
| 16A13228 | AIR PRESSURE GAGE ASSEMBLY (0-400 PSI) | 1 | |
| 16A13229L1-1 | TOOL WOW SWITCH DEPRESSION. | 1 | |
| 16F | PRESSURE BLANK TOOL | 1 | |
| 16M | PRESSURE BLANK TOOL | 1 | |
| 16VA11683-1 | REAMER, PILOTED .259 -.245 OVERSIZE PRESS NUT | 1 | |
| 16VA11687-1 | REAMER, PILOTED .5585 - .545 OVERSIZE PRESS NUT | 1 | |
| 16VA11688-1 | REAMER, PILOTED .6335 - .62 OVERSIZE PRESS NUT | 1 | |
| 17-545 / 702A | TIRE PRESSURE GAUGE | 1 | |
| 170-55006-701 31H5 | PRESSURIZATION TEST UNIT | 1 | |
| 170-55006-70131H5 | PRESSURIZATION TEST UNIT | 1 | |
| 1709-1 | BRACKET, ACCELEROMETER, 250 SERIES, COMPRESSOR | 1 | |
| 171-13273-003 | TIRES PRESSURE CALIBRATION | 1 | |
| 171-4 | HIGH PRESSURE TEFLON(1/200) | 3 | |
| 171-6 | HIGH PRESSURE TEFLON(1/100) | 3 | |
| 171013-00 | PRESSURE GAUGE | 1 | |
| 1716 | BRACKET, ACCELEROMETER, 250 SERIES, COMPRESSOR (-C28/-C30/-C40/-C47 & RR300) | 3 | |
| 172234-02 | REGULATOR, PRESSURE | 1 | |
| 173049-96 | HIGH PRESSURE HOSE | 3 | |
| 17311-0-2000 | Bearing Press Tool | 1 | |
| 17311-0-2001 | Bearing Press Tool | 1 | |
| 17312-0-201 | Bearing Press Fixture | 1 | |
| 17320-0-201 | Bearing Press Fixture | 1 | |
| 177E.18 | STRIGHT NOSE "COMPRESSION" PLIERS | 1 | |
| 177E.9 | STRIGHT NOSE "COMPRESSION" PLIERS | 1 | |
| 179-618-4 | O-RING COMPRESSION TOOL | 1 | |
| 179-618-4 | O-RING COMPRESSION TOOL | 1 | |
| 1796A010002 | LOW PRESSURE GROUND CONNECTION | 1 | |
| 179E.18 | STRIGHT NOSE "COMPRESSION" PLIERS | 1 | |
| 179E.9 | STRIGHT NOSE "COMPRESSION" PLIERS | 1 | |
| 17R-K3 | PRESSURE SWITCH | 1 | |
| 17T124 | TOOL - PRESSURE PAD ALIGNMENT | 1 | |
| 17TES0041 | LOW PRESSURE LANDING GEAR STRUT SERVICE CART | 4 | |
| 17TES0960 | RDI FA2100 DFDR DOWNLOAD AND DECOMPRESSION SOFTWARE | 1 | |
| 18-013-028 | PNEUMATIC PRESSURE GAUGE 0-25BAR R1/8“BOTTOM PORT DIAMETER50MM | 1 | |
| 18-013-888 | PRESSURE GAUGE | 1 | |
| 18-4203-6000 | LOW PRESSURE REGULATOR | 1 | |
| 18-4208-0010 | HIGH PRESSURE NITROGEN BOOSTER | 11 | |
| 18-4216-6000 | REGULATOR ASSY,LOW PRESSURE NITROGEN-HF ANTENNA COUPLER | 9 | |
| 18-4216-6000 | ADAPTOR, LOW PRESSURE NITROGEN | 9 | |
| 18-4216-6000 | REGULATOR-NITROGEN,LOW PRESSURE | 9 | |
| 18-4303-0000 | CART − NITROGEN (4 BOTTLES), CHARGING, GAUGING, HIGH AND LOW PRESSURE | 6 | |
| 18-4303−0000 | CART - NITROGEN (4 BOTTLES) CHARGING GAUGING HIGH AND LOW PRESSURE | 6 | |
| 18-4314-9800 | NITROGEN BLOW OUT SYSTEM &LOW PRESSURE REGULATOR | 1 | |
| 18-4315-0000 | TILTABLE FOUR BOTTLE SERVICE CART (BOOSTER, MANIFOLD, HIGH & LOW PRESSURE REGULATORS) (CE) | 4 | |
| 18-4318-0000 | TILTABLE FOUR BOTTLE SERVICE CART (MANIFOLD, HIGH & LOW PRESSURE REGULATORS) | 2 | |
| 18-900L | 18" LASER DRILL PRESS WITH VARIABLE SPEED, IDEAL FOR PRECISE DRILLING IN VARIOUS MATERIALS, INCLUDING COMPOSITES. | 1 | |
| 1811GA465 | TESTER: PRESSURE,PIT0T STATIC, | 13 | |
| 1811HA463 | TESTER − PITOT−STATIC PRESSURE (115/220 V) | 7 | |
| 1825-2460 | COMPRESSIONRIVETERS | 1 | |
| 1826M63G01 | BRACKET, ENGINE LOW PRESSURE TURBINE | 1 | |
| 18276-225 | PRESSURE CLAMPS | 1 | |
| 18330904-2 | PRESSURE GAUGE | 8 | |
| 183S-523 | BINKS PRESSURE TANK | 1 | |
| 189-030 | RS PRO ANALOGUE POSITIVE PRESSURE GAUGE BOTTOM ENTRY 300PSI, CONNECTION SIZE G 3/8 | 1 | |
| 189DTT | KIT - ELECTRONIC CONTROL WITH DRIVE UNIT, COMPRESSOR TURNING | 1 | |
| 189DTT-U | KIT - ELECTRONIC CONTROL WITH DRIVE UNIT, COMPRESSOR TURNING | 1 | |
| 189ETT-U | KIT - ELECTRONIC CONTROL WITH DRIVE UNIT, COMPRESSOR TURNING | 1 | |
| 18AH | THRRET PUNCH PRESS | 1 | |
| 18C1210G01 | ADAPTOR, MANIFOLD PRESSURE CHECK | 1 | |
| 18MM-XT | COMPRESSION TESTER EXTENSION (2E) | 2 | |
| 18−4216−6000 | LOW PRESSURE NITROGEN REGULATOR | 9 | |
| 18−4303−0000 | Cart − Nitrogen (4 bottles) Charging Gauging High and Low Pressure | 6 | |
| 19000- 515 | PRESSURIZATION ATTACHMENT | 1 | |
| 19000-690 | COMPRESSOR | 1 | |
| 19000-690/C | AIR COMPRESSOR | 1 | |
| 1900070 PM | SPRING COMPRESSOR | 1 | |
| 1900135-1 | SEAL COMPRESSOR | 1 | |
| 1900135-2 | SEAL COMPRESSOR | 1 | |
| 1907-00544 | PRESSURE GAUGE | 1 | |
| 19286-1000 | Hydraulic Press Assembly | 1 | |
| 193-2 | HOSE-LOW PRESSURE RUBBE(1/200) | 3 | |
| 1945-04-08-03H | PRESSURE REG.ASSY | 1 | |
| 1945-04-08-09-01 | PRESSURE BOTTLE FILL VALVE WITH AN-4 | 1 | |
| 19514111-15 | MANIFOLD ASSY, LOWER, COMPRESSOR BLEED AIR DUCTING | 1 | |
| 196-64509-405 | HYD TUBE PRESSURE | 1 | |
| 196-64879-403 | TUBE ASSY,HYDR SYS,PRESSURE | 1 | |
| 196-66031-403 | TUBE ASSY,HYDR SYS,PRESSURE | 1 | |
| 196T08450-401 | TOOL, SPRING COM-PRESSOR - OSM | 1 | |
| 1981-H-000 | GROUND CONNECTOR ADAPTER-PRESSURE | 1 | |
| 1981H000 | COUPLING HALF, PRESSURE | 1 | |
| 19843J | PRESS FIT ASSEMBLY | 2 | |
| 199E.18 & 197E.18 | NOSE "COMPRESSION" PLIERS | 1 | |
| 19C0903G01 | ADAPTER SET PRESSURE TEST/RIG - VIGV, VBV, VSV SPECIAL TOOL FOR VARIBLE BYPASS VALVE (VBV) REPLACEMENT AND CHECK | 1 | |
| 1A/NIV-L-541 | GAUGE, LOW PRESSURE WITH HOSE | 1 | |
| 1A15 | APU CRACK PRESSURE GAUGE | 1 | |
| 1C3569 | PRESSUREZING UNIT | 1 | |
| 1C3569G01 | PRESSUREZING UNIT | 1 | |
| 1C3569G02 | PRESSURIZER, HYDRAULIC UNIT | 1 | |
| 1C3569G2 | PRESSURIZER, HYDRAULIC UNIT | 1 | |
| 1C3569G3 | PRESSURIZING UNIT | 1 | |
| 1C5634G01 | FIXTURE, LIFT - LOWER PRESSURE TURBINE STATOR, LOWER | 1 | |
| 1C5635G01 | LIFT FIXTURE - LOW PRESSURE TURBINE STATOR CASE | 1 | |
| 1C5797 | DRIVER SET-LOW PRESSURE TURBINE SHROUDS | 1 | |
| 1C5797 REV J | DRIVER SET-LOW PRESSURE TURBINE SHROUDS | 1 | |
| 1C5906 | TOOL SET, INSP-LOW PRESSURE TURBINE ROTOR BLADES | 1 | |
| 1C5906 REV H | TOOL SET, INSPECTION-LOW PRESSURE TURBINE ROTOR BLADES | 1 | |
| 1C5964 | SLING, LIFT-HIGH PRESSURE TURBINE NOZZLE ASSEMBLY | 1 | |
| 1C5964G01 | Sling, Lift - High Pressure Turbine, Stage 2 Nozzle Assembly | 1 | |
| 1C5976 | FIXTURE, LIFT-COMPRESSOR | 1 | |
| 1C5976G01 | FIXTURE, LIFT-COMPRESSOR | 1 | |
| 1C5976G02 | FIXTURE LIFT - VERTICAL COMPRESSOR STATOR HALF | 1 | |
| 1C6001 | FIXTURE, HOLDING- LOW PRESSURE TURBINE ROTOR FORWA | 1 | |
| 1C6065 | FIXTURE, CONCENTRICITY CHECK-LOW PRESS TURBINE RTR | 1 | |
| 1C6065 REV J | FIXTURE, CONCENTRICITY CHECK-LOW PRESS. TURBINE ROTOR | 1 | |
| 1C6189 | ADAPTER, PRESSURE RUBE ADAPTER | 1 | |
| 1C6193 | FIXTURE SET, MACHINING - FRONT COMPRESSOR STATOR | 1 | |
| 1C6193 REV B | FIXTURE SET, MACHINING - FRONT COMPRESSOR STATOR | 1 | |
| 1C6215 | GAGE SET-COMPRESSOR ROTOR BL | 1 | |
| 1C6215G01 | GAGE SET-COMPRESSOR ROTOR BL | 1 | |
| 1C6216 | GAGE SET-COMPRESSOR STATOR VAN | 1 | |
| 1C6216G01 | GAGE SET-COMPRESSOR STATOR VAN | 1 | |
| 1C6296 | FIXTURE, WELD AFT PRESSURE BAL | 1 | |
| 1C6296G01 | FIXTURE, WELD AFT PRESSURE BAL | 1 | |
| 1C6299 | GAGE SET, INSP SEAL STATIONARY AIR, AFT PRESS BAL | 1 | |
| 1C6299 REV A | GAGE SET, INSP. SEAL STATIONARY AIR, AFT PRESS. BAL. | 1 | |
| 1C6487 | DRIVE SET - ARBOR PRESS, BEARING REMOVAL | 1 | |
| 1C6795 | GAGE - COMPRESSION | 1 | |
| 1C6795G01 | GAGE-COMPRESSOR STATOR VANE | 1 | |
| 1C6868G03 | FIXTURE, DRIVE - LOW PRESSURE TURBINE ROTOR | 1 | |
| 1C6871G01 | CASE, DUMMY - LOW PRESSURE TURBINE STATOR | 1 | |
| 1C6881 | TEST SET, PRESS CHK FUEL SHRD MNFLD & FEEDER TUBE | 1 | |
| 1C6881 REV B | TEST SET, PRESS CHK FUEL SHROUDED MNFLD & FEEDER TUBE | 1 | |
| 1C6891 | EYE, LIFT LOW PRESSURE TURBINE ROTOR-AFT | 1 | |
| 1C6895 | FIXTURE,DROP CHECK-COMPRESS | 1 | |
| 1C6895G01 | FIXTURE,DROP CHECK-COMPRESS | 1 | |
| 1C6908 | FIXTURE, HOLDING - COMPRESSOR | 1 | |
| 1C6908G01 | FIXTURE, HOLDING - COMPRESSOR | 1 | |
| 1C6950G05 | WRENCH, SPANNER - HIGH PRESSURE TURBINE ROTOR COUPLING NUT | 1 | |
| 1C6952P01 | Wrench, Spanner - Oil Tube High Pressure Turbine Rotor | 1 | |
| 1C6987 | EYE, LIFT-HIGH PRESSURE TURB. RTR. FWD | 1 | |
| 1C6987 REV NC | EYE, LIFT-HIGH PRESSURE TURB. RTR. FWD | 1 | |
| 1C6993G02 | ADAPTER, SUPPORT - HIGH PRESSURE COMPRESSOR CASE | 1 | |
| 1C8000G01 | FIXTURE SPREADER, COMPRESSOR ROTOR BLADES STAGE 1 | 1 | |
| 1C8031G05 | Fixture, Hinge - Upper Compressor Case | 1 | |
| 1C8032G01 | Fixture, Hinge - Low Pressure Turbine Stator Case | 1 | |
| 1C8032G03 | FIXTURE, HINGE - LOW PRESSURE TURBINE STATOR CASE | 1 | |
| 1C8039 | FIXTURE, RAISE & SUPPORT- UPPER COMPRESSOR CASE | 1 | |
| 1C8039G02 | Fixture, Raise and Support - Upper Compressor Case | 1 | |
| 1C8039G03 | FIXTURE, RAISE AND SUPPORT - UPPER COMPRESSOR CASE | 1 | |
| 1C8042G01 | FIXTURE, LIFT AND SUPPORT - LOW PRESSURE TURBINE STATOR CASE, UPPER | 1 | |
| 1C8052G02 | TOOL, INSTALL - COMPRESSOR ROTOR BLADE, STAGE 1 | 1 | |
| 1C8059 | STAND, VERTICAL- HIGH PRESS TURB ROTOR-EMC | 1 | |
| 1C8059G01 | Stand - Vertical - High Pressure Turbine Rotor | 1 | |
| 1C8069G02 | FIXTURE, LIFT - HIGH PRESSURE TURBINE ROTOR, HORIZONTAL | 1 | |
| 1C8069G04 | Fixture Lift - High Pressure Turbine Rotor - Horizontal | 1 | |
| 1C8083G01 | HIGH PRESSURE TURBINE ROTOR | 1 | |
| 1C8099P01 | PROTECTOR, STRUT CAVITY - COMPRESSOR FRONT FRAME | 1 | |
| 1C8106 | PRESSURIZATION SYS. C SUMP LM2500 | 1 | |
| 1C8106 REV L | PRESSURIZATION SYS. "C" SUMP LM2500 | 1 | |
| 1C8106G02 | SLAVE C-SUMP PRESSURIZATION KIT | 1 | |
| 1C8115G03 | PROTECTOR, COMPRESSOR ROTOR | 1 | |
| 1C8129 | CALIBRATION SYS, PRESS. TRANSDUCER | 1 | |
| 1C8129 REV A | CALIBRATION SYS, PRESS. TRANSDUCER | 1 | |
| 1C8217G01 | Fixture, Lift - High Pressure Turbine Nozzle Stage 1 | 1 | |
| 1C8217G02 | Fixture, Lift - High Pressure Turbine Nozzle Stage 1 | 1 | |
| 1C8224 | C SUMP PRESSURIZER | 1 | |
| 1C8300G01 | FIXTURE, SUPPORT-HP COMPRESSOR STAGE 0 | 1 | |
| 1C8312G01 | TOOL SET, REMOVE HIGH PRESSURE COMPRESSOR ROTOR STAGE 1 AND 2 RETAINING RING | 1 | |
| 1C8322G01 | Fixture, Lift - Low Pressure Turbine Stator, Upper | 1 | |
| 1C8330G01 | CASE, DUMMY-COMPRESSOR STATOR | 1 | |
| 1C8333G01 | JACK ASSEMBLY, SUPPORT COMPRESSOR REAR FRAME | 1 | |
| 1C8339G01 | TRUCK, HP COMPRESSOR ROTOR - HORIZO | 1 | |
| 1C8343G01 | Fixture Set, Top Halving - HP Compressor Stator Case | 1 | |
| 1C8350 | FIXTURE, LIFT- COMPRESSOR STATOR CASE, UPPER | 1 | |
| 1C9317G01 | ADAPTER SUPPORT/LIFT - LPC SPECIAL TOOL (LIFTING TOOL) FOR REPLACEMENT LOW PRESSURE COMPRESSOR (LPC) | 1 | |
| 1C9349 | CLOSURE SET ASSY, PRESSURE TEST- A SUMP | 1 | |
| 1C9376G01 | JACK ASSEMBLY, SUPPORT COMPRESSOR REAR FRAME | 1 | |
| 1C9393 | ADAPTER SET, PRESSURE TEST/ RIG-VIGV, VBV AND VSV | 1 | |
| 1C9393G01 | Adapter set, Pressure test VIGV, VBV, VSV | 2 | |
| 1C9397 | HOLDER - SHIM HP TURB PRESS | 1 | |
| 1C9397G01 | HOLDER, SHIM - HP TURB PRESSURE TUBE ADAPTER | 1 | |
| 1C9400G01 | Fixture set raise and hinge upper compressor case | 1 | |
| 1C9447 | JACK ASSEMBLY, SUPPORT COMPRESSOR | 1 | |
| 1C9448 | JACK ASSY, SUPPORT-COMPRESSOR REAR FRAME | 1 | |
| 1C9616G02 | LOW - PRESSURE TURBINE ROTOR, SHAFT, CONNECTION NU | 1 | |
| 1C9626 | TORQUE ADAPTER - PRESSURE TUBE | 1 | |
| 1C9626G01 | Torque Adapter, Pressure Tube/Coupling Nut-Hpt Rotor | 1 | |
| 1F132 | SEAL PRESS | 1 | |
| 1F246 | LEAD SEAL PRESS | 1 | |
| 1G174-1A | PRESSURE SWITCH | 1 | |
| 1NH20 | PRESSURE GAUGE TOOL | 1 | |
| 1R18209 | Fixture, Grinding - HP Compressor, Stage 6 Variable Stator Vanes | 1 | |
| 1SF3521 | FUEL FILTER DIFF. PRESS. SWITCH | 1 | |
| 1X25176842 | PRESS-IN FIXTURE | 1 | |
| 1X53176709 | FREE WHEEL SEAL TO TAKE OUT TOOL/PRESSER | 1 | |
| 1X54139177 | PRESSURE PLATE | 1 | |
| 1X54139289 | PRESSURE PLATE | 1 | |
| 1X54176807 | PRESS-IN PLATE | 1 | |
| 1X54176808 | PRESS-IN PLATE | 1 | |
| 1X54176852 | PRESSURE PLATE | 1 | |
| 1X54176853 | PRESSURE PLATE | 1 | |
| 1X54176854 | PRESSURE PLATE | 1 | |
| 1X54176875 | PRESS TOOL | 1 | |
| 1X56136916 | PRESSURE PIECE | 1 | |
| 1X56176813 | PRESSURE PLATE | 1 | |
| 2,311,000 | WHEEL PRESSURE MONITORING STATION | 1 | |
| 2,311,100 | WHEEL PRESSURE MEASURING SENSOR | 1 | |
| 2-1/2 | COMPOUND LEVERAGE ARBOR PRESSES MODEL 2-1/2 6 TON CAPACITY | 1 | |
| 2-10890 | COMPRESSOR | 1 | |
| 2-4569 | TOOL FOR PRESSURE RELEASE PLUG | 1 | |
| 2-5BAR | PRESSURE GAUGE TOOL | 1 | |
| 2-753-A060 | PRESSURE HEAD COVER | 5 | |
| 2.311.000 | WHEEL PRESSURE MONITORING STATION | 1 | |
| 2.5 DIGITAL P-G | DIGITAL PRESSURE GAUGE 10 BAR | 1 | |
| 2.5400(8610908) | GAUGE, PRESSURE, HIGH, 0 - 400 PSI RANGE - MFG: WIKA INSTRUMENT CORP - P/N# 2.5400(8610908) | 1 | |
| 20-1000 | PRESSURE GAUGE UNIVERSAL WASH UNIT | 1 | |
| 20-1000-01B160 | GAGE,PRESSURE,DIAL 0-160PSI | 1 | |
| 20-101 | 3/32 PRESSURE CLECO FASTENER | 1 | |
| 20-102 | 1/8 PRESSURE CLECO FASTENER | 1 | |
| 20-103 | 5/32 PRESSURE CLECO FASTENER | 1 | |
| 20-104 | 3/16 PRESSURE CLECO FASTENER | 1 | |
| 20-4502-6000 | REGULATOR O2 PRESSUR | 14 | |
| 20-4504-7000 | FOUR BOTTLE CART (MANIFOLD, HIGH & LOW PRESSURE REGULATOR), OXYGEN - NO BOOSTERS | 5 | |
| 20-4505-7000 | FOUR BOTTLE OXYGEN SERVICE CART (BOOSTER, MANIFOLD & HIGH PRESSURE REGULATOR) | 8 | |
| 20-4518-9000 | Cart, Low Press Oxygen Test | 1 | |
| 20-4519-9000 | Cart, High Press Oxygen Test | 1 | |
| 20-4521-9000 | CART, NITROGEN, O2 PRESS CHECK | 1 | |
| 20-4523-0000 | TILTABLE FOUR BOTTLE SERVICE CART (BOOSTER, MANIFOLD, HIGH & LOW PRESSURE | 4 | |
| 20-4525-0000 | TILTABLE FOUR BOTTLE SERVICE CART (MANIFOLD & HIGH PRESSURE REGULATOR) | 2 | |
| 200000-1727 | CABIN PRESSURE TEST ADAPTER | 1 | |
| 2000000-1415-1 | LOW PRESSURE BLEED AIR CAP | 1 | |
| 2000000-2389 | LOW PRESSURE AIR SOURCE | 1 | |
| 2000PSI | PRESSURE GAUGE TOOL | 1 | |
| 200317658-30 | TEST SET, PRESSURE TEMPERATURE | 1 | |
| 20036D100-3 | GAGE ASSEMBLY, AIR PRESSURE | 1 | |
| 200910-CA-3 | PRESSURE RELIEF DEVICE | 1 | |
| 200PSI | OXYGEN PRESSURE GAUGE | 1 | |
| 201202-CA | Brake Pressure Gauge | 2 | |
| 201202CA | BRAKE PRESSURE GAUGE | 2 | |
| 201475-001 | SPL-11492 TRANSIENT SUPPRESSION UNIT - BYPASS HARNESS 737-300, -400HGW | 7 | |
| 2015-A-321 | DRAFT GAUGE 2000 SERIES (0 TO 15 IN.WC) DIFFERENTIAL PRESSURE | 1 | |
| 20151F2 | CAP PRESS | 1 | |
| 201D-253I | Tire Pressure Guage | 1 | |
| 201L2541 | TIRE PRESSURE GAUGE 400PSI | 1 | |
| 201L254I | TIRE PRESSURE GAUGE 400PSI | 1 | |
| 2020-2669 | 0-12 BAR REGULATOR, PRESSURE GAUGE | 1 | |
| 2022P7 | INDICATOR,PRESSURE | 1 | |
| 2024056-1 | BEARING PRESS FIXTURE | 1 | |
| 2024056-1PM | BEARING PRESS FIXTURE | 1 | |
| 2024064-1 | bearing Press Fixture | 1 | |
| 2024065-1 | Bearing Press Fixture | 1 | |
| 2024067-1 | Seal Press Fixture | 1 | |
| 2024150-1 | Bearing Press Fixture | 1 | |
| 2024151-1 | SEAL PRESS FIXTURE | 1 | |
| 2024185-1 | PROOF PRESSURE TEST SET | 1 | |
| 2024225-1 | PRESSURE TEST FIXTURE | 1 | |
| 2024226-1 | SPRING COMPRESSION TOOL | 1 | |
| 2024230-1 | LOAD COMPRESSOR DIFFUSER PULLER | 1 | |
| 2024246-3 | BEARING PRESS FIXTURE | 1 | |
| 2024356-1 | PRESSURE DROP TEST SET | 1 | |
| 2024370-1 | Seal Press Fixture | 1 | |
| 2024488-1 | BEARING PRESS FIXTURE | 1 | |
| 2024530-1 | COMPRESSION GAGE | 1 | |
| 2024572-1 | PRESSURE TEST PLUG SET | 1 | |
| 2024573-1 | PRESSURE DROP TUBE SET | 1 | |
| 2024574-1 | PROOF PRESSURE TEST SET | 1 | |
| 2024575-1 | PRESSURE DROP TEST SET | 1 | |
| 2024614-1 | Spring compressor | 1 | |
| 2024658-1 | Bearing Press Fixture | 1 | |
| 2024822-1 | FIXTURE, TEST, PRESSURE SENSOR | 1 | |
| 2024839-1 | Press Tool | 1 | |
| 2024874-1 | PRESSURE TEST PLUG SET | 1 | |
| 2024875-1 | PRESSURE DROP TUBE SET | 1 | |
| 2024875-1000 | PRESSURE DROP TUBE (P/O P/NO. 2024875-1) | 1 | |
| 2024875-1001 | PRESSURE DROP TUBE (P/O P/NO. 2024875-1) | 1 | |
| 2024920-1 | Press Fixture | 1 | |
| 2024925-1 | Press Fixture | 1 | |
| 2025064-1 | FIXTURE, TEST, PRESSURE SENSOR | 1 | |
| 2025202-1 | RING COMPRESSOR | 1 | |
| 2025202-1PM | RING COMPRESSOR | 1 | |
| 2025203-1 | SPRING COMPRESSOR | 1 | |
| 2025203-1PM | SPRING COMPRESSOR | 1 | |
| 2025261-1 | BEARING REMOVAL FIXTURE (REMOVES 3617585-001 COMPRESSOR BEARING FROM 3810127-1 BEARING HOUSING ASSEMBLY AND 3822055-1 COUPLING SHAFT) | 1 | |
| 2025601-1 | SEAL SLEEVE COMPRESSION TOOL | 1 | |
| 20260-343 | GAUGEPRESSURE, 0 - 6BAR | 1 | |
| 2026268-001 | HYDROSTATIC PRESSURE TEST SET THS-1 | 1 | |
| 20282-F | FEMALE QUICK COUPLING (PRESS OUT LET) | 1 | |
| 2028P | DIGITAL PRESSURE METER 0-1000 MBAR | 1 | |
| 204-022 | ENGINE AREA/MID-CABIN COVER, w/IR suppressor exhaust | 1 | |
| 204-040-003-23-PAT-ZD | PRESSING TOOL | 1 | |
| 206-075-670-107 | INDICATOR FUEL PRESS AND LOAD METER | 1 | |
| 206-075-676-107 | FUEL PRESSURE LOADMETER | 1 | |
| 206-910 | HEATSHIELD SET (non-pressurized models) (set of 11) | 1 | |
| 206-916 | HEATSHIELD SET (pressurized models) (set of 11) | 1 | |
| 206-SP-F-01 | PRESSING PLUG, INNER RING | 1 | |
| 206-SP-F-02 | PRESSING PLUG, DUPLEX BEARING | 1 | |
| 206-SP-F-06 | PRESSING PLUG, LOWER SEAL | 1 | |
| 2067-00 | HIGH PRESSURE HOSE | 1 | |
| 2067-000 | HIGH PRESSURE HOSE | 1 | |
| 2067-101 | HIGH PRESSURE PIPE 750MM | 1 | |
| 20791-02AB | CABIN PRESSURE CONTROLLER | 1 | |
| 20791-03AB | CONTROLLER-PRESSURE | 1 | |
| 20791-12AC | CONTROLLER-PRESSURE | 1 | |
| 20791-13AC | CONTROLLER-PRESSURE | 1 | |
| 208-402 001-001 | PRESSURE GAUGE ASSEMBLY | 1 | |
| 2084 | DIDITAL PRESS GAGE MANOMETER 300 PSI | 1 | |
| 209-062-003-001 | SWITCH,PRESSURE | 1 | |
| 209368-0 | PRESSURE COUPLING TOOL | 1 | |
| 2096M52G01 | MANIFOLD - COOLING LOW PRESSURE TURB | 1 | |
| 20AA6 | VALVE-REGULATOR,PRESSURE | 1 | |
| 20C6092G01 | WRENCH,PRESSURE TUBE REMOVAL | 1 | |
| 20F | PRESSURE BLANK | 1 | |
| 20JN36 | LEAD-FREE PRESSURE GAUGE | 1 | |
| 20M | PRESSURE BLANK | 1 | |
| 21-01-220 | PRESSURE REGULATOR FOR NITROGEN CYLINDER | 1 | |
| 21-10-12 | PRESSURE TEST CAP | 1 | |
| 21-1EYTS78R71A | Test Set - Q Pot Pressure | 1 | |
| 21-30-04 | KIT PNEUMATIC PRESSURE TEST(115V/60HZ) | 1 | |
| 21-30-07 | KIT PNEUMATIC PRESSURE TEST ALTITUDE LIMITER OUR FLOW VALVE | 1 | |
| 21-52-02 | PRESSURE TEST CAP | 1 | |
| 211C223-175CC2 | Pressure Stop Wrench | 1 | |
| 212-240-002-101 | COMPRESSION TOOL SET, KAFLEX D/S | 1 | |
| 212-5/16A | BIT, INSERT - "TORQUE SET" (CABIN PRESSURE OUTFLOW VALVE) (COOPER INDUSTRIES INC.) | 5 | |
| 212-92049.1 | Nose landing gear steering pressure test kit | 1 | |
| 212-92050.3 | EMERGENCY BRAKE PRESSURE TEST KIT | 1 | |
| 212-92051 0.3 | Brake system pressure test kit | 1 | |
| 212-92051.3 | BRAKE SYSTEM PRESSURE KIT | 1 | |
| 2122 | RESERVOIR PRESSURE TEST SET TOOL | 9 | |
| 21298-270-4 | CABIN PRESSURIZATION | 1 | |
| 21510-3 | REFRIG COMPRESSOR | 1 | |
| 215371-0 | EMERGENCY FLOATATION SYSTEM DIGITAL PRESSURE GAUGE | 1 | |
| 215372-0 | PRESSURE,INLET | 1 | |
| 216692PM | PRESSURE TEST PLATE | 1 | |
| 21774T1 | PRESSING TOOL | 1 | |
| 2184104F1 | Press Fixture | 1 | |
| 2187-3 | COMPRESSOR INLET PORT COVER AND GASKET | 1 | |
| 2188-1 | COMPRESSOR OUTLET PORT COVER | 1 | |
| 2188-2 | COMPRESSOR PORT COVER AND GASKET REPLACED BY 2187-3 | 1 | |
| 2189038F1 | Pin Press Fixture | 1 | |
| 2189070F1 | Bearing Press And Stake Fixture | 1 | |
| 218A6671-145 | TUBE ASSY - FIRE SUPPRESSION | 1 | |
| 219000F35 | PISTON SEAL COMPRESSOR | 1 | |
| 21C2379G03 | TANK PRESSURAZING | 1 | |
| 21C2438G01 | CLEANER,PRESSURE,SOLVENT-WATER | 2 | |
| 21C473G01 | TEE,OIL PRESSURE | 1 | |
| 21C5400P01 | GRINDER, VERTICAL, COMPRESSOR STATOR | 1 | |
| 21C5627P01 | FIXTURE, GRIND - COMPRESSOR STATOR | 1 | |
| 21C5628P01 | FIXTURE, GAGING - COMPRESSOR STATOR | 1 | |
| 21C5934 | PRESSURE READOUT,AUX LUBE SYSTEM | 1 | |
| 21C6072G01 | DEPRESSING TOOL | 1 | |
| 21C613P01 | LIFTING COMPRESSOR STATOR | 1 | |
| 21C7016G01 | COMPRESSOR ROTOR SHAFT COMPONENTS HYDRAULIC PULLER | 1 | |
| 21C7018G01 | COMPRESSOR ROTOR BUILDUP STAND | 1 | |
| 21C7046G01 | COMPRESSOR MULTI-PURPOSE HYDRAULIC PULLER | 1 | |
| 21C7090G02 | SET, COMPRESSOR STATOR MEASUREMENT FIXTURES (CONSISTING OF) | 1 | |
| 21C7092G02 | SET, COMPRESSOR | 1 | |
| 21C7098G02 | COMPRESSOR ROTOR MEASUREMENT FIXTURES SET | 1 | |
| 21C7110G01 | FIXTURE, PRESSURE CHECK | 1 | |
| 21C7112G01 | SUPPORT, DUMMY COMPRESSOR CASING BAR | 1 | |
| 21C7114G02 | FIXTURE, COMPRESSOR | 1 | |
| 21C7145G02 | CRADLE, BALANCE, COMPRESSOR | 1 | |
| 21C7206G01 | COMPRESSOR ROTOR BLADE TIPS GRINDING FIXTURE (NO ESTÁ EN EL MANUAL) | 1 | |
| 21C7206G02 | COMPRESSR ROTOR GRIND FIXTURE | 1 | |
| 21C7213G012 | COMPRESSOR STATOR | 1 | |
| 21C7213G02 | MASTER, COMPRESSOR STATOR | 1 | |
| 21C7219G01 | FIXTURE, MEASUREMENT COMPRESSOR ROTOR | 1 | |
| 21C7237G01 | GRINDING FIXTURE, COMPRESSOR DISCHARGE ROTATING SEAL | 1 | |
| 21C7248P01 | COMPRESSOR ROTOR PILOT ADAPTER | 1 | |
| 21C7321G01 | KIT, COMPRESSOR ROTOR BALANCE (SCHENCK) | 1 | |
| 21C7322G01 | COMPRESSOR ROTOR BALANCE CRADLE | 1 | |
| 21C7323G01 | SHROUD, COMPRESSOR ROTOR BALANCE | 1 | |
| 21C7416G01 | COMPRESSOR ROTOR HORIZONTAL HOISTING ADAPTER | 1 | |
| 21C7419G01 | BENCH SET, COMPRESSOR STAGE 1 BLADE--DISK | 1 | |
| 21C7422G01 | LOCK, COMPRESSOR ROTOR | 2 | |
| 21C7473G01 | OIL PRESSURE | 1 | |
| 21C7494G01 | B-SUMP PRESSURE/TEMPERATURE ADAPTER | 1 | |
| 21C7727G01 | ADAPTER COMPRESSOR | 1 | |
| 21C7729G01 | FIXTURE, STAGE 1 GAS GENERATOR ROTOR FORWARD PRESSURE FLUSHING | 1 | |
| 21C7731G02 | FWD PRESSURE, FLUSH FIXTURE, STAGE 1 NOZZLE | 1 | |
| 21C7743G01 | COMPRESSOR ROTOR HOLDING ADAPTER | 1 | |
| 21C7785P01 | COMPRESSOR BLADE-DISK LEADING EDGE GAGE SET | 2 | |
| 21C7815P01 | CONSOLE, COMPRESSOR COMPONENTS ELECTRONICMEASUREME | 1 | |
| 21C8297G01 | FRONT FRAME PRESSURE TEST | 1 | |
| 21C8983P01 | FAN AND COMPRESSOR BLADES MARKING | 1 | |
| 21SN04-275A | LOW OIL PRESS SWITCH | 1 | |
| 21SN04-333 | SWITCH-ASSY-FUEL-PRESSURE | 2 | |
| 21SN04-466 | SWITCH FUEL PRESS | 1 | |
| 21SN41-111 | SWITCH-PRESSURE | 2 | |
| 21SN41-113A | PRESSURE SWITCH APU/CROSS | 1 | |
| 220-10 PSI | DIGIMANO PRESS VACCUM MTR | 1 | |
| 220-10CMH2O | PRESSURE MONITORING DEVICE - 0-5 PSIG (0-138 INCHES OF WATER) (0-35 KPA) | 1 | |
| 220-10PSI | Pressure Vacuum Tester | 1 | |
| 220-2PSI | METER GAUGE – PRESSURE/VACUUM | 1 | |
| 22101-R817370 | LEAD WOOL COMPRESSION TOOL | 1 | |
| 222-5031 | GAUGE, PRESSURE 0-9000PSI | 1 | |
| 222.2038-E | PRESSURE RELIEF VALVE | 1 | |
| 222.5002 | PRESSURE GAUGE (0-600PSI) | 1 | |
| 222.5002-E | PRESSURE GAUGE 0-600 PSI | 1 | |
| 222.5012 | PRESSURE GAUGE 0-600 PSI | 1 | |
| 222.5026 | PRESSURE GAUGE (0-6000PSI) | 1 | |
| 222.5026-E | PRESSURE GAUGES FOR KUNZ BRAKE TEST STAND | 1 | |
| 222.5029 | PRESSURE GAUGE 0-250 PSI | 1 | |
| 222.503 | PRESSURE GAUGE (0-250PSI) | 1 | |
| 222.5030-E | PRESSURE GAUGES FOR KUNZ BRAKE TEST STAND | 1 | |
| 22241-0-2000 | DOWEL PIN PRESS | 1 | |
| 22241-0-2000 PM | DOWEL PIN PRESS | 1 | |
| 2227000F115 | PRESSING TOOL SUMMINE LEAVE BEARING | 1 | |
| 2227000F126 | PRESSING TOOL, SPHERICAL BEARING | 1 | |
| 223.3094 | PRESSURE LIMITING VALVE R1/2 10 BAR ADJUSTED ON 150 | 1 | |
| 223.3095 | PRESSURE LIMITATION VALVE G1/4 35 BAR | 1 | |
| 2212 | PRESSURE GAUGE | 1 | |
| 223.3153-E | PRESSURE LIMITATION VALVE 10 BAR (EPDM) | 1 | |
| 223.3154-E | PRESSURE LIMITATION VALVE 35 BAR (EPDM) | 1 | |
| 223.44 | BTS NEOTRONIC PRESS TESTER | 1 | |
| 223.5002 | PRESSURE GAUGE 0-600 PSI,R 1/2 | 1 | |
| 223.5002-E | PRESSURE GAUGE, 0-600 PSI, CLASS 1 | 1 | |
| 223.5002-E 600 | PRESSURE GAUGE, 0-600 PSI, CLASS 1 | 1 | |
| 223.65002-E | PRESSURE GAUGE, 0-600 PSI, CLASS 1 | 1 | |
| 2242959-7 | PRESSURE TEST ADAPTOR | 1 | |
| 2244082-4 | PRESSURE TEST ADAPTER | 1 | |
| 2244082/3 | AIR PRESSURE TEST ADAPTOR | 1 | |
| 225 DX | HYDRAULIC FLUID PRESSURE SOURCE | 4 | |
| 225DX | HYDRALIC FLUID PRESSURE SOURCE | 4 | |
| 23035964-06 | CONNTECTOR, PRESSURE RELI TESTER | 1 | |
| 23058496-2 | FIXTURE – COMPRESSOR CASE, LATHE HOLDING | 1 | |
| 23063523-201 | COMPRESSOR WASH ADAPTER | 1 | |
| 23063525-201 | ENGINE ADAPTER - COMPRESSOR CLEANING CART | 2 | |
| 23063525-202 | ENGINE ADAPTER - COMPRESSOR CLEANING CART | 2 | |
| 23063525-203 | ENGINE ADAPTER - COMPRESSOR CLEANING CART | 2 | |
| 2310-A-321 | DRAFT GAUGE 2000 SERIES (-5.0 TO 5.0 IN.WC) DIFFERENTIAL PRESSURE | 1 | |
| 2310A15 | PRESSURE GAUGE | 1 | |
| 2311F | Pressure Tester | 4 | |
| 2311FA | PRESSURE TESTER 101- | 7 | |
| 232-50-100-1500PSI | PRESSURE GAUGE. 4” DIAL 1500 PSI | 1 | |
| 232.30.063 | WIKA BOURDON TUBE PRESSURE GAUGE | 1 | |
| 232.50 | WIKA PRESSURE GAUGE | 1 | |
| 232.50.063 | PRESSURE GUAGE 400PSI | 1 | |
| 232.50.063-150 | PRESSURE GAUGE, STAINLESS STEEL VERSION, 1/4"NPT RANGE 150 PSI | 1 | |
| 232.50.100-3500 | PRESSURE GAUGE, STAINLESS STEEL VERSION, 1/2"NPT RANGE 3500 PSI | 1 | |
| 232.50.100-6000 | PRESSURE GAUGE, STAINLESS STEEL VERSION, 1/2"NPT RANGE 5800 PSI | 1 | |
| 232.50.100.2300 | PRESSURE GAUGE, STAINLESS STEEL VERSION, 1/2"NPT RANGE 2300 PSI | 1 | |
| 232.50.63_0-100 | PRESSURE GAUGE 100PSI CL-1.6 | 1 | |
| 23278T200 | Pressing Fixture | 1 | |
| 233.50.063 | PRESSURE GAUGE 2000PSIG CL-1.6 | 1 | |
| 2337-1415-P4-1 | LOW PRESSURE REGULATOR | 1 | |
| 236063523-202 | COMPRESSOR WASH ADAPTER | 1 | |
| 23734T201 | TOOL PRESSING | 1 | |
| 23734T201 | Pressing Tool | 1 | |
| 23734T202 | TOOL PRESSING | 1 | |
| 23734T202 | Pressing Tool | 1 | |
| 23745-14 | HOSE ASSEMBLY FUEL FLOW PRESS | 1 | |
| 23745-15 | HOSE ASSEMBLY FUEL PRESS | 1 | |
| 23ME65B00713-1 | SLING - FRONT COMPRESSOR DRIVE TURBINE AND EXHAUST CASE, JT9D ENGINE | 1 | |
| 240L100 | BELT, COMPRESSOR DRIVE | 3 | |
| 2437A33 | BOX/PAN HAND PRESS BRAKE(절곡기 48"WIDE) | 1 | |
| 244-0747 | COMPRESSION INDICATOR GAUGE | 1 | |
| 2440 | TRANSMITTER, PRESSURE Â | 2 | |
| 24441-01AB | CONTROLLER-PRESSURE | 1 | |
| 2444A61 | ARBOR PRESS MODIFIED FOR TOOLING | 1 | |
| 245000-78 | TYRE CHANGE PRESS | 1 | |
| 246-9904-00 | WHEEL PRESSURE CHECKING DEVICE | 1 | |
| 2474M65P05 | SYSTEM PRESSURE | 1 | |
| 2474M65P08 | PRESSURE SUB-SYSTEM | 1 | |
| 247C5189 | FIXTURE, LIFT & TURN-HP COMPRESSOR UPPER CASE HALF | 1 | |
| 24F | PRESSURE BLANK TOOL | 1 | |
| 24M | PRESSURE BLANK TOOL | 1 | |
| 25-1009-SW-02L-XSG-0/100 | GAGE KMA AIR PRESSURE KMA 0-100PSI | 1 | |
| 25-1009AW02L300 | PRESSURE GAUGE | 3 | |
| 25-1009SW02B-XFF-3 | PRESSURE GAUGE WITH NIST & CAL CERTS | 1 | |
| 25-500 | HIGH PRESSURE REGULATOR | 1 | |
| 25-500C-580 | COMPRESSED GAS REGULATOR 650L | 2 | |
| 25-6Y1663A | PRESS/HEAD SPANNER | 6 | |
| 25/GR60-80 | TIRE PRESSURE FILLING GAUGE | 1 | |
| 250 MBAR | PRESSURE GAUGE | 1 | |
| 2500 PSI | JACK PRESSURE GAUGE | 1 | |
| 250A | AIR-PRESSURE ACTIVATED SEALANT DISPENSER | 6 | |
| 251009AWL02L300 | PRESSURE GAUGE (0-300 PSI) | 1 | |
| 251009SW02LXC4SG | PRESSURE GAUGE | 1 | |
| 251009SW02LXSG300PSI | PRESSURE GAUGE | 1 | |
| 2510F | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 1 | |
| 25204-21B21 | PRESSURE GAUGE.0-30HQ | 1 | |
| 25204-21B71 | VACCUUM PRESSURE GAUGE | 1 | |
| 25204-24B21 | PRESSURE GAUGE | 1 | |
| 2530-1 | VALVE PRESSURE RELIEF | 1 | |
| 253626-1 | Holder, Bearing Press | 1 | |
| 253648-3 | BEARING COMPRESSOR DRIVER | 1 | |
| 2545B-01 | WOB-L PRESSURE / VACUUM PUMP V-115 | 1 | |
| 2545C-02 | PUMP (PRESSURE/VACUUM) | 3 | |
| 2545C02 | VACUUM & PRESSURE PUMP | 3 | |
| 2546B-01 | WOB-L PRESSURE / VACUUM PUMP V-115 | 4 | |
| 2546C-01 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 2 | |
| 2546C-02 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 5 | |
| 25502-28 | GAUGE, PRESSURE, OUTLET, 600 PSI | 1 | |
| 25502-35 | GAUGE PRESSURE 5000 PSI | 1 | |
| 25504-24B21 | PRESSURE GAUGE.0-150PSI | 1 | |
| 25505-27B17GAB-GCO | PRESSURE GAUGE | 1 | |
| 25516-24E21 | TEST PRESSURE GAUGE | 1 | |
| 256035-PT | 256035-PT PRESSURE TRANSDUCER (OPTIONAL) PRESSURE TRANSDUCER. RANGE 0-750/1000 PSIG. INCLUDES: ADAPTER AND BRACKET . T-FITTING . HARNESS | 1 | |
| 2566533-4 | MV PACKING COMPRESSION TOOL (CAGE: 06848) | 1 | |
| 2566547-4 | SEAL COMPRESSION TOOL (CAGE: 06848) | 1 | |
| 2566810-4 | METERING VALVE SLEEVE PACKING COMPRESSION TOOL SET SIZER (CAGE: 06848) | 1 | |
| 259-202702-4-3 | COM-22906 - ADAPTER - ALTITUDE PRESSURE SWITCH TO AIR DATA TEST SET | 1 | |
| 2590 | VALVE-PRESSURE RELIEF | 6 | |
| 25B-647 | COMPRESSION SPRING | 1 | |
| 25W1005 | PRESSURE GAUGE 160,300,400,600 PSI | 1 | |
| 25Y1817A | COMPRESSION TOOL | 4 | |
| 26-1000 SERIES | TEST REGULATOR( SELF-VENTING TYPE) 50 - 6000 PSIG (0.34 - 41.37 MPA) OUTLET PRESSURE | 1 | |
| 26-1012-24-163 | TEST REGULATOR(SELF-VENTING TYPE)50 - 6000 PSIG OUTLET PRESSURE | 1 | |
| 26-1612-24 | TEST REGULATOR 0 - 250 PSIG OUTLET PRESSURE (26-1600 SERIES) | 1 | |
| 26-1612-24-453 | PRESSURE REDUCING REGULATOR | 1 | |
| 26-1613-24-000 | PRESSURE GAGE (0-4000 PSI) | 1 | |
| 2609330-T | SPRING COMPRESSOR (3IT) | 1 | |
| 26142-AT1 | GEROTOR PIN PRESS FIXTURE | 1 | |
| 26142AT1 | GEROTOR PIN PRESS FIXTURE | 1 | |
| 26398-AT1 | PRESS FIXTURE | 1 | |
| 26398AT1 | PRESS FIXTURE | 1 | |
| 2640-0008 | PRESSURE GAUGE HYPRO 0-600 PSI | 1 | |
| 2661-04 | PRESSURE GAUGE | 1 | |
| 266362-1 | BUSHING AND SLINGER PRESSING AND REMAINNING HOLDER | 1 | |
| 266362-4 | BUSHING AND SLINGER PRESSING AND REMAINNING HOLDER | 1 | |
| 266362-6 | BUSHING AND SLINGER PRESSING AND REMAINNING HOLDER | 1 | |
| 26719AT1 | PRESSING TOOL | 1 | |
| 268P-5/16 | SCREWDRIVER - TORQUE SET (CABIN PRESSURE OUTFLOW VALVE) (COOPER INDUSTRIES INC.) | 1 | |
| 269A9243 | Sleeve - 269A5108 Retainer Removal Tool - Arbor Press | 1 | |
| 269A9261 | Sleeve - 269A5050-5 And -8 Cane Install - Arbor Press | 1 | |
| 269A9265 | Sleeve - 269A5618 Removal - Arbor Press | 1 | |
| 269A9268 | Sleeve, 269A5609 Shaft Removal - Arbor Press | 1 | |
| 269T1005 | Compressor Check Spline Adapter Engine Turning Tool | 2 | |
| 269T1179 | Arbor Press & Staking Tool | 1 | |
| 269T3321 | Upper Pulley Cap Pressing Tool (2 Pieces) | 1 | |
| 269T3321P | UPPER PULLEY PRESS CAP (2PCS) | 1 | |
| 26E24-1 | PRESSURE ATTENUATION TEST KIT | 1 | |
| 27,-1-4253 | TESTER DIF PRESSURE | 1 | |
| 27-01-4253 | TESTER, DIFFERENTIAL PRESSURE | 1 | |
| 27-1-3576 | Pressure Indicator Testbox | 1 | |
| 27-1-3695 | MAGNET, TEST - FIRE BOTTLE PRESSURE SWITCH | 2 | |
| 27-1-3909 | HYDRAULIC RESERVOIR AIR PRESSURE GAUGE | 1 | |
| 27-1-3913 | CONTRLLR, AIR PRESSURE | 1 | |
| 27-1-4253 | TEST SET - DIFFER. PRESS. | 1 | |
| 27-1-4441 | CONTRLLR, AIR PRESSURE | 1 | |
| 27-1338-0103-04 | WRENCH TIGHTENING PRESSURE | 1 | |
| 2700G-G70M/C | REFERENCE PRESSURE GAUGE (0-10,000 PSI) WITH ACCREDITATION | 1 | |
| 272166-2 | BEARING PRESS FIXTURE | 1 | |
| 274000TF50-1001 | INDICATOR PRESSURE SWITCH | 1 | |
| 274164-1-1 | Bearing Press fixtu (2 IT) | 1 | |
| 274224-1-1 | PRESSURE TEST ADAPTER | 1 | |
| 2755 | AIR CHUCK HI PRESSUR | 21 | |
| 2755 (PC-1011) | COUPLING HIGH PRESS. NITROGEN | 1 | |
| 2755-26 | HIGH PRESSURE INFLATING | 1 | |
| 2756 | Pressure Gauge | 1 | |
| 277-1T1 | TOOL, COMPRESSOR HOLDING CLAMP | 1 | |
| 278-1T1 | COMPRESSOR ASSEMBLY SUPPORT | 1 | |
| 278-1T6 | COMPRESSOR HOLDING CLAMP | 1 | |
| 278147-2 | TESTER CABIN PRESSURE | 1 | |
| 279194-52 | SPRING COMPRESSOR GUIDE | 1 | |
| 279194-53 | SPRING COMPRESSOR | 1 | |
| 27A01T40000 | HYDRAULIC MANIFOLD (FOR LOW PRESSURE TEST ONLY) | 1 | |
| 27R3 | LOW PRESSURE REGULATOR | 1 | |
| 28-0-1268N | CONTRLLR, AIR PRESSURE | 3 | |
| 28-0-1608C | AIR PRESS CONTROLL (CON GAUGE 0-60 ) | 2 | |
| 28-0-1707 | F100 PLUG ALTER PRESS CAB | 3 | |
| 28-0-2038D | PRESSURE GAUGE SET (LDG GR SERVICE) | 4 | |
| 28-11-B4 | COMPRESSION SLEEVE | 1 | |
| 28-20-05 | SHROUD PRESSURIZATION ASSEMBLY | 1 | |
| 28-4-P | NICOPRESS ZINC PLATED COPPER SLEEVE - 5/32 INCH | 1 | |
| 28.0-4106-43 | PRESS GAGE | 1 | |
| 28.14.9200.250.000 | AIR-CONDITIONING SYSTEM COMPRESSOR OIL LEVEL INDICATOR | 1 | |
| 28007-9 | WING DRY BAY PRESSURIZATION EQUIPMENT | 1 | |
| 280279-1 | COMPRESSOR, RETAINING RING | 1 | |
| 281869-1 | Seal Pressing | 1 | |
| 282645-1 | PRESS GAUGE | 4 | |
| 282775AT20 | Press Plate | 1 | |
| 2827A01 | VALVE, NEGATIVE PRESSURE RELIEF | 1 | |
| 282870AF1 | Spring Compressor | 1 | |
| 282900AF1 | Spring Compressor | 1 | |
| 2839 | PISTON RING COMPRESSOR | 1 | |
| 2840-00-337-4341 | ARM ASSEMBLY, COMPRESSOR STATOR LINKAGE | 1 | |
| 284310-1-1 | Bearing press | 2 | |
| 284453-1-1 | ADAPTER ASSY, OIL PRESSURE, TORQUE CALIBRATION | 1 | |
| 284521-1-1 | PRESSURE TEST CAP | 1 | |
| 284542-2-1 | PROBE PRESS AND TEMP | 1 | |
| 284846-1-1 | HOLDER TURBINE WHEEL BEARING PRESS | 2 | |
| 285-5 | COMPRESSOR | 4 | |
| 2851OC0003 | TRAILER, COMPRESSED GAS CYLINDER MODEL MD-3 | 1 | |
| 285391-1-1 | Holder, Bearing Press | 1 | |
| 285498-1-1 | Spring compressor | 1 | |
| 2855-01-1 | PRESSURE EQUALIZER | 1 | |
| 28550-1-1 | PRESSURE EQUALIZER | 1 | |
| 285585-1-1 | HOLDER TURBINE WHEEL PRESSING | 1 | |
| 285812-1-1 | Bearing Pressing Holder | 1 | |
| 2871/AMT040082 | CABIN PRESSURE TEST SET | 1 | |
| 287156-1-1 | Press Fixture | 1 | |
| 287156-1-1TK | Bearing Driver Press | 1 | |
| 287777-1 | SEAL PRESSING DRIVER | 1 | |
| 287777-1PM | SEAL PRESSING DRIVER | 1 | |
| 287821-1 | PISTON RING COMPRESSOR | 1 | |
| 287903-1 | DRIVER AND HOLDER BEARING PRESSING | 1 | |
| 287903-2 | DRIVER AND HOLDER BEARING PRESS | 1 | |
| 287966-1 | BEARING PRESS DRIVER | 1 | |
| 287996-1 | DRIVER BEARING PRESS | 1 | |
| 289238-1 | FIXTURE BEARING PRESS | 1 | |
| 289239-1 | DRIVER BEARING PRESSING | 1 | |
| 289358-1 | COMPRESSOR SPRING | 1 | |
| 289460-1 | HOLDER AND DRIVER BEARING PRESSING | 1 | |
| 289483-1 | HOLDER AND DRIVER PRESS | 1 | |
| 289484-1 | HOLDER AND DRIVER BEARING PRESS | 1 | |
| 289493-1 | DRIVER BEARING PRESS | 1 | |
| 289494-1 | HOLDER AND DRIVER SHAFT PRESSING | 1 | |
| 289505-1 | DRIVER BEARING PRESS | 1 | |
| 289528-1 | Seal press tool | 2 | |
| 289568-1 | COMPRESSOR SPRING | 1 | |
| 289594-1 | SPRING COMPRESSOR SET | 1 | |
| 289594-1TK | SPRING COMPRESSION SET | 1 | |
| 289696-1 | DRIVER AND HOLDER BEARING PRESS | 1 | |
| 289702-1 | HOLDER BEARING PRESSING | 1 | |
| 289709-1 | HOLDER AND DRIVER PRESSING SWAGING | 1 | |
| 289743-1 | HOLDER SHAFT COMPRESSOR | 1 | |
| 289853-1 | DRIVER SEAL PRESSING | 1 | |
| 289854-1 | DRIVER SEAL PRESSING | 1 | |
| 289856-1 | DRIVER AND HOLDER BEARING PRESS | 1 | |
| 28ILCRJX01 | CRJ fuel pressure test kit | 1 | |
| 28ME65B00713-1 | TURNBUCKLE ASSEMBLY - HIGH COMPRESSOR TURBINE SUPPORT ON-WING MAINTENANCE, JT9D ENGINE | 1 | |
| 290000-002 | FITTING, HYDRAULIC PACKAGE GROUND SERVICE PRESS | 1 | |
| 29001H | CART - OIL, PRESSURIZED 50 PSI (345 KPA) MAX,10 GALLON (38 LITER) CAP | 1 | |
| 290083-187 | PRESSURE LUBRICATION FIXTURE | 1 | |
| 290121-4 | CABIN PRESSURE TEST SET | 2 | |
| 290121-4-MAEL | OVERPRESSURE VALVE TEST SET | 1 | |
| 2905 | GUIDE – COMPRESSOR IMPELLER REAR STUB SHAFT | 8 | |
| 290PSI | PRESSURE GAUGE TOOL | 1 | |
| 291545-1 | HOLDER AND COMPRESSOR ASSEMBLY VALVE | 1 | |
| 291841-1 | COMPRESSOR SPRING | 1 | |
| 291864-1 | PRESSURE TEST FIXTURE | 1 | |
| 291865-1 | PRESSURE TEST FIXTURE | 1 | |
| 291980-1 | BALANCE KIT, COMPRESSOR ROTOR | 1 | |
| 292976-2 | DRIVE COMPRESSOR ARBORS | 1 | |
| 293-0061 | PRESS TRANSDUCER | 1 | |
| 293.001.03 | LOW PRESSURE GAUGE | 1 | |
| 293077-1 | Compressor, Spring | 1 | |
| 2930GAUGE | NICOPRESS #2930 GO/NO-GO GAUGE | 1 | |
| 293201-1 | PISTON RING COMPRESSOR | 1 | |
| 293223-1 | pressure test cap | 1 | |
| 293439-1 | Press Fixture | 1 | |
| 293463-1 | SPRING COMPRESSOR | 1 | |
| 293481-1 | SPRING COMPRESSOR TOOL | 1 | |
| 293733-1 | HOLDING AND PRESS FIXTURE | 1 | |
| 293786-1 | PRESSURE TEST KIT | 1 | |
| 294123-1 | COMPRESSOR WHEEL HOLDING FIXTURE | 1 | |
| 294153-1 | PRESSURE CHECK ADAPTER | 1 | |
| 294440-1 | PRESSURE TEST CAP | 1 | |
| 294554-1 | PRESSURE TEST ADAPTER | 1 | |
| 294637-1 | COMPRESSOR LOADING FIXTURE | 1 | |
| 29466A-4C | PRESSURE PLUG | 1 | |
| 29466A-6C | PRESSURE PLUG | 1 | |
| 294861-1 | BEARING REMOVAL ADAPTER (USED TO LOCATE IN LARGER ID OF 3860168I STARTER GEAR TO PROVIDE A PRESSING SURFACE WHEN PRESSING GEAR FROM 3860160-1 BALL BEARING. USE WITH PROTO PULLER 4214 AND 294870-4 BEARING REMOVAL PLATE) | 1 | |
| 294861-2 | BEARING REMOVAL ADAPTER (USED TO LOCATE IN SMALLER ID OF 38601681 STARTER GEAR TO PROVIDE A PRESSING SURFACE WHEN PRESSING GEAR FROM 3860160-1 BALL BEARING. USE WITH PROTO PULLER 4214 AND 294870-4 BEARING REMOVAL PLATE) | 1 | |
| 294866-1 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE FOR REMOVING 3860181-1 SPUR GEAR | 1 | |
| 294866-10 | BEARING REMOVAL TOOL (LOCATES SMALLER INSIDE DIAMETER OF 3860180-2 SPUR GEARSHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPUR GEAR FROM 3605094-1 BEARING) | 1 | |
| 294866-2 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860182-1 SPUR GEAR | 1 | |
| 294866-3 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860166-1 HIGH SPEED PINION GEAR FROM 3860158-1 BEARING) | 1 | |
| 294866-5 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860165-1 OIL PUMP SPUR GEAR FROM 358027 BEARINGS) | 1 | |
| 294866-6 | BEARING REMOVAL ADAPTER (LOCATES LARGER INSIDE DIAMETER OF 3860180-2 SPUR GEARSHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPUR GEARSHAFT FROM 3605094-1 BEARING | 1 | |
| 294866-7 | BEARING REMOVAL TOOL (USED TO LOCATE IN LARGER ID OF 3860167-1 SPLINED SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPLINED SHAFT FROM 892576-1 BEARING) | 1 | |
| 294866-8 | BEARING REMOVAL TOOL (USED TO LOCATE IN SMALLER ID OF 3860167-1 SPLINED SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPLINED SHAFT FROM 892575-1 BEARING) | 1 | |
| 294879-1 | BEARING MECHANICAL PULLER (REMOVES 3822071-1 COMPRESSOR BEARING FROM 3810127-1 BEARING HOUSING ASSEMBLY AND | 1 | |
| 294891-1 | DRIVEN COMPRESSOR HOLDER ADAPTER | 1 | |
| 294892-1 | DRIVEN COMPRESSOR BEARING | 1 | |
| 294919-1 | Pressure Test Cap Assembly | 1 | |
| 294927-1 | DRIVEN COMPRESSOR REMOVAL HOISTING ADAPTER | 1 | |
| 296288-1T | ALIGN AND PRESS SHAFT TOOL | 1 | |
| 296318-1 | DRIVEN COMPRESSOR MICING BRIDGE | 1 | |
| 296323-1 | Shaft Roller Press Fixture | 1 | |
| 296327-1 | DRIVEN COMPRESSOR LINKAGE | 1 | |
| 296328-1/-2 | Reducer Tube Press Fixture | 1 | |
| 296385-1 | SEAL PRESSING DRIVER | 1 | |
| 296385-2 | SEAL PRESSING DRIVER | 1 | |
| 296400-1 | COMPRESSOR ASSEMBLY | 1 | |
| 296559-1 | FLANGE PRESS FIXTURE | 1 | |
| 296609-1 | METERED PRESSURE TEST FITTING | 1 | |
| 296633-2 | SEAL PRESSING DRIVER AND HOLDER | 1 | |
| 296761-1 | ADAPTER,PRESSURE SENSING | 1 | |
| 296903-1 | SPLINED HOLDER (TO ENGAGE SHAFT SPLINES DURING COMPRESSOR ASSEMBLY) | 1 | |
| 296957-1 | TEST FIXTURE FUEL PRESSURE | 1 | |
| 296958-1 | TEST FIXTURE FUEL PRESSURE RELIEF VALVE | 1 | |
| 298095-1 | COVER, PRESSURE TEST (COVER) | 1 | |
| 298406-1 | COMPRESSOR DUMMY NUT AND SPACER SET | 1 | |
| 298862-1 | SEAL COMPRESSION TOOL | 1 | |
| 299887-0 | DIGITAL PRESSURE GAUGE | 1 | |
| 299897-0 | ELECTRONIC PRESSURE PICK-OFF | 2 | |
| 2A1325 | PLUG, HOSE PRESSURE TEST | 1 | |
| 2A1325-3 | PLUG, HOSE PRESSURE TEST | 1 | |
| 2A1351 | COVER DEPRESSOR | 1 | |
| 2A2231-01 | TUBE - PRESS, NO.5BRG, ASSY OF | 1 | |
| 2A3091-01 | TUBE — PRESS, NO. 5 BRG, ASSY OF | 1 | |
| 2AA617-6329-001 | OUTER BEARING SLEEVE PRESS TOOL | 1 | |
| 2BARXP2I | DIGITAL PRESSURE GAUGE(0-2BAR) | 1 | |
| 2C 14699G02 | FIXTURE, LIFT-COMPRESSOR STATOR VANE SPACER | 1 | |
| 2C14014G01 | FIXTURE, LIFT AND TURN - COMPRESSOR ROTOR AFT | 2 | |
| 2C14025G05 | PUSHER SET, RACES AND SEALS - HIGH PRESSURE TURBINE ROTOR STAGE 1 | 3 | |
| 2C14029G04 | PULLER LOW PRESSURE | 4 | |
| 2C14031G04 | TRUCK, LOW PRESSURE TURBINE MODULE | 4 | |
| 2C14038 | FIXTURE, LIFT-HIGH PRESS. TURB. ROTOR, AFT | 1 | |
| 2C14038 REV D | FIXTURE, LIFT-HIGH PRESS. TURB. ROTOR, AFT | 1 | |
| 2C14038G02 | FIXTURE, LIFT - HIGH PRESSURE TURBINE ROTOR, AFT | 1 | |
| 2C14040 | WRENCH, PRESS. TUBE - COUPLING NUT, HP TURB. ROTOR | 1 | |
| 2C14040 REV M | WRENCH, PRESS. TUBE - COUPLING NUT, HP TURB. ROTOR | 1 | |
| 2C14040G01 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | 1 | |
| 2C14040G02 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | 1 | |
| 2C14040G03 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | 1 | |
| 2C14040G04 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | 1 | |
| 2C14040G05 | WRENCH, PRESS. TUBE-COUP.NUT HPTR | 3 | |
| 2C14040G06 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | 1 | |
| 2C14040G07 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | 2 | |
| 2C14040G08 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | 1 | |
| 2C1404G05 | TORQUE ADAPTER, PRESSURE TUBE | 1 | |
| 2C14052 | FIXTURE, LIFT & TURN- LOW PRESS. TURB. HORIZ. | 1 | |
| 2C14052 REV P | FIXTURE, LIFT & TURN- LOW PRESS. TURB. HORIZ. | 1 | |
| 2C14052G04 | FIXTURE, LIFT AND TURN - LOW PRESSURE TURBINE - HORIZONTAL | 4 | |
| 2C14052G05 | Fixture, Lift and Turn - Low Pressure Turbine | 3 | |
| 2C14092 | WRENCH, STARTER-LOW PRESSURE TURBINE NUT | 1 | |
| 2C14092 REV C | WRENCH, STARTER-LOW PRESSURE TURBINE NUT | 1 | |
| 2C14092G03 | WRENCH, STARTER - LOW PRESSURE TURBINE COUPLING NUT | 4 | |
| 2C14093G02 | WRECH, COUPLING NUT- LOWPRESSURE TURBINE MIDSHAFT | 1 | |
| 2C14093G03 | WRENCH COUPLING NUT - LOW PRESSURE TURBINE MIDSHAFT | 6 | |
| 2C14103G01 | DUMMY – HIGH PRESSURE COMPRESSOR STATOR | 1 | |
| 2C14103G02 | CASE,DUMMY-COMPRESSOR STATOR | 1 | |
| 2C14113G01 | COMPRESSOR | 3 | |
| 2C14124 | FIXTURE,SEAL-PRESSURIZE AGB | 1 | |
| 2C14124 REV D | FIXTURE, SEAL/PRESSURIZE ACCESS. GEARBOX | 1 | |
| 2C14124G02 | G/BOX SEAL PRESS. TEST FIXTURE | 4 | |
| 2C14126G01 | FIXTURE, LIFT COMPRESSOR | 1 | |
| 2C14165G01 | WRENCH SET – LOW PRESSURE TURBINE ROTOR DISKS | 3 | |
| 2C14178G01 | ADAPTER, PEDESTAL - COMPRESSOR REAR FRAME AFT FLANGE | 2 | |
| 2C14193G03 | STAND , SHIPSTOR - HIGH PRESS TURBINE | 5 | |
| 2C14201G01 | PEDESTAL SET - COMPRESSOR REAR FRAME | 1 | |
| 2C14203G01 | ADAPTER, PEDESTAL – COMPRESSOR REAR FRAME | 3 | |
| 2C14224G02 | ADAPTER SET, PEDESTAL - LOW PRESSURE TURBINE MODULE, FORWARD | 1 | |
| 2C14229G02 | COMPRESSOR REAR FRAME AFT SEALS | 1 | |
| 2C14239 | FIXTURE, RUNOUT - HIGH PRESS. TURB. RTR AFT FLANGE | 1 | |
| 2C14239 REV G | FIXTURE, RUNOUT - HIGH PRESS. TURB. RTR AFT FLANGE | 1 | |
| 2C14252 | TOOL, LAPPING-HIGH PRESSURE TURB. ROTOR SHAFT | 1 | |
| 2C14252 REV B | TOOL, LAPPING-HIGH PRESSURE TURB. ROTOR SHAFT | 1 | |
| 2C14261G01 | FIXTURE, ALIGNMENT - HIGH PRESSURE TURBINE ROTOR IMPELLER COVER | 2 | |
| 2C14282G01 | SET - PRESSURE CHECK, FUEL MANIFOLD | 1 | |
| 2C14288G01 | FIXTURE LIFTTURN COMPRESSOR ROTOR SPOOL | 1 | |
| 2C14602G02 | FIXTURE, RESTRAIN - TURBINE REAR FRAME TO LOW PRESSURE TURBINE ROTOR | 2 | |
| 2C14602G03 | FIXTURE, LOCKING – LOW PRESSURE TURBINE ROTOR | 4 | |
| 2C14602G04 | FIXTURE, RESTRAIN - TURBINE REAR FRAME TO LOW PRESSURE TURBINE ROTOR | 2 | |
| 2C14651G01 | CHUCK COMPRESSOR ROTOR ASSEMBLY FIXTURE | 3 | |
| 2C14661G01 | FIXTURE, INSTALLATION/REMOVAL COMPRESSOR REAR FRAME ASSEMBLY | 2 | |
| 2C14661G02 | FIXTURE, REMOVAL COMPRESSOR EAR FRAME ASSEMBLY | 1 | |
| 2C14672G04 | FIXTURE, LIFT - HIGH PRESSURE TURBINE ASSEMBLY FORWARD | 1 | |
| 2C14674G02 | INTALL & REMOVAL BUMPER BEARING COMPRESSOR ROTOR | 2 | |
| 2C14680G01 | PULLER, MANIFOLD-COMPRESSOR ROTOR | 2 | |
| 2C14686 | ADAPTER, LIFT - LP COMPRESSOR | 1 | |
| 2C14686 REV P | ADAPTER, LIFT-LOW PRESS. COMPRESSOR | 1 | |
| 2C14686G01 | ADAPTER, LIFT-LOW PRESSURE COMPRESSOR | 1 | |
| 2C14686G02 | ADAPTER, LIFT-LOW PRESSURE COMPRESSOR | 1 | |
| 2C14686G03 | ADAPTER, LIFT-LOW PRESSURE COMPRESSOR | 1 | |
| 2C14686G04 | ADAPTER, LIFT-LOW PRESSURE COMPRESSOR | 1 | |
| 2C14686G05 | Adapter, Lift - Low Pressure Compressor | 3 | |
| 2C14688G04 | PULLER SET - STAGE 1 HIGH PRESSURE TURBINE DISK, RACES AND SEALS | 4 | |
| 2C14692G01 | FIXTURE SITTING, LOW PRESS TURBINE NOZ STG 2&3 | 1 | |
| 2C14696G02 | FIXTURE, ASSEMBLY - STAGE 1 HIGH PRESSURE TURBINE NOZZLE | 1 | |
| 2C14699G01 | FIXTURE, LIFT - COMPRESSOR STATOR CASE, UPPER | 2 | |
| 2C14699G02 | FIXTURE, LIFT-COMPRESSOR STATOR VANE SPACER | 1 | |
| 2C14704G06 | COUPLING NUT-DUMMY SHAFT COMPRESSOR OR HPT ROTOR | 2 | |
| 2C14711 | CLOSURE,PRESSURE CHECK-FUEL DRAIN MANIFOLD | 1 | |
| 2C14711G01 | CLOSURE, PRESSURE CHECK - FUEL DRIN MANIFOLD | 5 | |
| 2C14727 | PULLER-HIGH PRESSURE TURBINE STAGE 1 SHROUD | 1 | |
| 2C14730G01 | ADAPTER PEDESTAL COMPRESSOR STATOR FWD | 2 | |
| 2C14730P03 | ADAPTER, PEDESTAL – COMPRESSOR STATOR, FWD | 1 | |
| 2C14756G01 | PRESSURE TEST KIT | 2 | |
| 2C14756P02 | PRESSURE TEST KIT | 1 | |
| 2C14774G04 | GAGE, FLO AREA- HIGH-PRESSURE TURBINE NOZZLE | 1 | |
| 2C14780G02 | ADAPTER, PEDESTAL - COMPRESSOR REAR FRAME | 2 | |
| 2C14785G01 | FIXTURE, PULL - HIGH PRESSURE TURBINE ROTOR AFT AIR SEALS | 2 | |
| 2C14798G01 | TOOL INSTALLATION LOW PRESSURE TURBINE | 5 | |
| 2C14823G01 | FIXTURE,GRIND,HIGH PRESSURE TURBINE STAGE 2 SHROUDS | 1 | |
| 2C14858G01TK | FIXTURE INSTALL-HIGH PRESS.COMPR.BUMPER BRG. | 1 | |
| 2C14859G02 | PULLER,MANIFOLD-COMPRESSOR ROTOR, | 2 | |
| 2C14869G01 | PUSHER, HPT ROTOR/DUMMY COMPRESSOR ROTOR | 1 | |
| 2C14875G01 | PROTECTOR, COMPRESSOR REAR FRAME OUTER AFT FLANGE | 1 | |
| 2C14878 | FIXTURE - LIFT -COMPRESSOR ROTOR SPOOLS | 1 | |
| 2C14900G01 | ADAPTER BALANCE STG 2 COMPRESSOR DRIVE AND BLADES | 1 | |
| 2C14901G01 | ADAPTER BALANCE STG 1 COMPRESSOR DISK AND BLADES | 1 | |
| 2C14902G04 | STAND, BALANCE BUILD UP ‐ LOW PRESSURE TURBINE MODULE | 1 | |
| 2C14920G02 | TOOL SET, BALANCE ‐ HIGH PRESSURE TURBINE ROTOR | 1 | |
| 2C14952G01 | COMPRESSOR INLET TEMPERATURE (T25) | 1 | |
| 2C14952G02 | PROBE, PRESS./TEMP F | 1 | |
| 2C14952G04 | PROBE, PRESS./TEMP F | 1 | |
| 2C14954G04 | PROBE, PRESSURE/TEMPERATURE - FAN DISCHARGE (CF6-80 PMC) | 1 | |
| 2C15042G03 | Pressure Tube Coupling Nut Gage | 2 | |
| 2C15051G02 | FIXTURE, PRESSURE - AXIAL POSITION | 1 | |
| 2C15600G01 | FIXTURE, POSITION COMPRESSOR REAR FRAME SUMP | 1 | |
| 2C15600G01/P03 | COMPRESSOR REAR FRAME SUMP FIXTURE | 1 | |
| 2C18044 | ADAPTER SET ASSYPEDESTAL-COMPRESSOR REAR FRAME | 1 | |
| 2C18044G01 | ADAPTER PEDESTAL - COMPRESSOR REAR FRAME (PEDESTAL ADAPTERS) | 1 | |
| 2C18053G02 | TOOL, INSTALLATION - SELF-WRENCHING BOLTS, HIGH PRESSURE TURBINE THERMAL SHIELD | 1 | |
| 2C5084G01 | HOLDER, COMPRESSOR STATOR REAR | 1 | |
| 2C5089G01 | FIXTURE COMPRESSOR ROTOR BUILDUP | 1 | |
| 2C5132G01 | CASING, COMPRESSOR DUMMY | 1 | |
| 2C5209P01 | Compressor Inlet Cover | 1 | |
| 2C5247G01 | KIT, COMPRESSOR ROTOR SET SCREW ASSEMBLY | 1 | |
| 2C5631G01 | SET, REMOVAL, SETSCREW BLADE LOCKING COMPRESSOR ROTOR | 1 | |
| 2C5640 | RETAINER COMPRESSOR ROTOR | 1 | |
| 2C5709G01 | FIXTURE - COMPRESSOR | 1 | |
| 2C5798G01 | SET, STAKING, SETSCREW, COMPRESSOR ROTOR STAGES 3 - 14 | 1 | |
| 2C5811G01 | SET, SETSCREW / DRILL STOP COMPRESSOR ROTOR | 1 | |
| 2C5934G01 | PRESSURE - READ OUT | 1 | |
| 2C5952 | PUMPING UNIT, CLEANING - COMPRESSOR | 1 | |
| 2C6013G01 | SLING, LIFT-COMPRESSOR ROTOR | 1 | |
| 2C6013G05 | SLNG LIFT COMPRESS R | 1 | |
| 2C6015 | GAGE SET, BOROSCOPE OPENING-COMPRESSOR STATOR | 1 | |
| 2C6015 REV C | GAGE SET, BOROSCOPE OPENING-COMPRESSOR STATOR | 1 | |
| 2C6015G01 | GAGE SET - BORESCOPE OPENING, COMPRESSOR STATOR | 1 | |
| 2C6016 | FIXTURE VERTICAL LIFT-COMPRESSOR STATOR HALF | 1 | |
| 2C6016G04 | FIXTURE , VERTICAL LIFT COMPRESSOR STATOR HALF | 2 | |
| 2C6017G01 | FIXTURE,LIFT AND TURN-COMPRESS | 1 | |
| 2C6019 | DRIVER SET-COMPRESSOR STATOR VANE | 1 | |
| 2C6019 REV D | DRIVER SET-COMPRESSOR STATOR VANE | 1 | |
| 2C6019G01 | DRIVER SET - COMPRESSOR STATOR VANE | 1 | |
| 2C6019G01 | DRIVER SET-COMPRESSOR STATOR V | 1 | |
| 2C6019G03 | DRIVER SET, COMPRESSOR STATOR VANE | 1 | |
| 2C6023 | LIFTEYE-COMPRESSOR ROTOR, AFT | 1 | |
| 2C6023G01 | LIFTEYE-COMPRESSOR ROTOR, AFT | 1 | |
| 2C6023G03 | EYE LIFT COMPRESSOR | 1 | |
| 2C6023G04 | EYE LIFT COMPRESSOR | 1 | |
| 2C6024 | TRUCK, COMPRESSOR ROTOR | 1 | |
| 2C6024G01 | TRUCK - COMPRESSOR ROTOR | 1 | |
| 2C6024G07 | TRUCK - COMPRESSOR ROTOR | 1 | |
| 2C6024G08 | TRUCK - COMPRESSOR ROTOR | 1 | |
| 2C6025 | PROTECTOR,FUEL NOZZLE PORT-COMPRESSOR REAR FRAME | 1 | |
| 2C6030G01 | WRENCH, AIR DUCT-COMPRESSOR | 1 | |
| 2C6031G01JW94946 | FIXTURE,LIFT-COMPRESSOR SPOOL | 1 | |
| 2C6031G01 | FIXTURE, LIFT-COMPRESSOR ROT | 1 | |
| 2C6031G02 | FIXTURE, LIFT - COMPRESSOR ROTOR SPOOLS | 1 | |
| 2C6036G01 | STAND, VERTICAL-COMPRESSOR | 1 | |
| 2C6059 | FIXTURE LIFT - HIGH PRESS. TURBINE ROTOR, HORIZ. | 1 | |
| 2C6060 | FIXTURE, LIFT - NOZZLE HIGH PRESS, TURB NOZZLE, ST | 1 | |
| 2C6061 | STAND, REWORK & STORAGE HIGH PRESSURE TURBINE ROTR | 1 | |
| 2C6061G05 | STAND, VERTICAL - HIGH PRESSURE TURBINE ROTOR ENGINE MAINTENANCE UNIT | 1 | |
| 2C6061G06 | STAND, VERTICAL - HIGH PRESSURE TURBINE ROTOR ENGINE MAINTENANCE UNIT | 1 | |
| 2C6067 | STAND, REWORK & STORAGE- HIGH PRESSURE TURBINE ROT | 1 | |
| 2C6092 | WRENCH, SPNR - PRESS TUBE, HIGH PRESS TURB ROTOR | 1 | |
| 2C6092 REV F | WRENCH, SPANNER - PRESS. TUBE, HIGH PRESS. TURB. ROTOR | 1 | |
| 2C6119 | SHIM SET, BLADE TIPS-COMPRESSOR ROTOR | 1 | |
| 2C6119G02 | SHIM SET, BLADE TIPS - COMPRESSOR ROTOR | 1 | |
| 2C6141 | EYE, LIFT-HIGH PRESSURE TURBINE ROTOR AFT | 1 | |
| 2C6141G02 | LIFTEYE - HIGH PRESSURE TURBINE ROTOR, AFT | 2 | |
| 2C6162G04 | PLATFORM, REMOVAL, VERTICAL - COMPRESSOR STATOR CASING | 1 | |
| 2C6172 | CASE, DUMMY - COMPRESSOR STATOR | 1 | |
| 2C6172 REV C | CASE, DUMMY - COMPRESSOR STATOR | 1 | |
| 2C6172G01 | CASE,DUMMY-COMPRESSOR ROTOR | 1 | |
| 2C6172G02 | CASE, DUMMY - COMPRESSOR STATOR | 1 | |
| 2C6173G01 | WRENCH,SEAL NUT-COMPRESSOR RE | 1 | |
| 2C6174G01 | TOOL SET, PRESSURE TEST-FAN FRAME | 1 | |
| 2C6175 | COMPRESSOR CASE FIXTURE TOOL | 1 | |
| 2C6175G04 | FIXTURE, LIFT - COMPRESSOR STATOR CASE, UPPER | 1 | |
| 2C6177 | POSITIONER - BLADE, COMPRESSOR ROTOR | 1 | |
| 2C6177G01 | POSITIONER-BLADE,COMPRESSOR RO | 1 | |
| 2C6177G02 | POSITIONER, COMPRESSOR ROTOR BLADES | 1 | |
| 2C6189 | ADAPTER, PRESSURE TABLE ADAPTER | 1 | |
| 2C6189 REV K | ADAPTER, PRESSURE TABLE ADAPTER | 1 | |
| 2C6189G01 | WRENCH-PRESSURE TUBE,HPT ROTOR | 1 | |
| 2C6189G07 | ADAPTER, PRESSURE TUBE ADAPTER | 1 | |
| 2C6195G02 | HIGH PRESSURE TURBINE SHAFT AND DISK LIF | 1 | |
| 2C6197 | EYE, LIFT-HIGH PRESSURE TURBINE ROTOR | 1 | |
| 2C6266G01 | EYE LIFT LOW PRESSURE TURBINE ROTOR | 1 | |
| 2C6348P02 | PIN GUIDE FOR FAN ROTOR INSTALLATION SPECIAL TOOL FOR REPLACEMENT LOW PRESSURE COMPRESSOR (LPC) | 3 | |
| 2C6360G01 | ADAPTER, PEDESTAL-COMPRESSOR STATOR, FORWARD | 2 | |
| 2C641 | ASCROFT 0-5 PSI , +/- 1 PRESSURE GAGE, ¼ NPT X 2.5 DIA | 2 | |
| 2C6505 | GAGE, HIGH PRESSURE TURBINE NOZZLE OPEN AREA | 1 | |
| 2C6510 | SNUBBER SET, BLADES-COMPRESSOR | 1 | |
| 2C6510G01 | SNUBBER SET, BLADES-COMPRESSOR | 1 | |
| 2C6515 | FIXTURE, INSPECT-COMPRESSOR | 1 | |
| 2C6515G01 | FIXTURE, INSPECT-COMPRESSOR | 1 | |
| 2C6523G01 | GAGE , SHIME LOW PRESSURE TURBINE COUPLING | 1 | |
| 2C6529 | SNUBBER SET,GRINDING-COMPRESSO | 1 | |
| 2C6529G01 | SNUBBER SET,GRINDING-COMPRESSO | 1 | |
| 2C6540 | GAGE, INSPECT-COMPRESSOR ROTOR | 1 | |
| 2C6540G01 | GAGE, INSPECT-COMPRESSOR ROTOR | 1 | |
| 2C6541 | GAGE, INSPECT-COMPRESSOR ROTOR | 1 | |
| 2C6541G01 | GAGE, INSPECT-COMPRESSOR ROTOR | 1 | |
| 2C6542 | GAGE, INSPECT-COMPRESSOR ROTOR | 1 | |
| 2C6542G01 | GAGE, INSPECT-COMPRESSOR ROTOR | 1 | |
| 2C6545 | GAGE INSPECT-COMPRESSOR FRONT | 1 | |
| 2C6545G01 | GAGE INSPECT-COMPRESSOR FRONT | 1 | |
| 2C6547 | GAGE,INSPECT-COMPRESSOR REAR S | 1 | |
| 2C6547G01 | GAGE,INSPECT-COMPRESSOR REAR S | 1 | |
| 2C6549 | FIXTURE, HOLDING-COMPRESSOR | 1 | |
| 2C6549G01 | FIXTURE, HOLDING-COMPRESSOR | 1 | |
| 2C6552G04 | FIXTURE GRINDING HIGH PRESSURE TURBINE SHROUNDS TOOL | 1 | |
| 2C6563G01 | TOOL, INSTALL/ REMOVE - HIGH PRESSURE TURBINE DAMPER SLEEVE | 1 | |
| 2C6576 | FIXTURE,HEAT-TREAT-HPTR PRESSU | 1 | |
| 2C6576G01 | FIXTURE,HEAT-TREAT-HPTR PRESSU | 1 | |
| 2C6599G01 | TOOL PREBEND - COMPRESSOR ROTOR BLADE RETAINER, STAGE 1 | 3 | |
| 2C6600G02 | TOOL SEAT - COMPRESSOR ROTOR BLADE RETAINER, STAGE 1 | 1 | |
| 2C6600G03 | TOOL, TAB BENDER – HIGH PRESSURE COMPRESSOR STAGE 1 BLADE, RETAINER STOP | 4 | |
| 2C6600G04 | TOOL SEAT - COMPRESSOR ROTOR BLADE RETAINER, STAGE 1 | 1 | |
| 2C6609 | WRENCH-COMPRESSOR CASE FORWARD | 1 | |
| 2C6609G01 | WRENCH-COMPRESSOR CASE FORWARD | 1 | |
| 2C6610G01 | PIN, GUIDE STAGE 2 HIGH PRESSURE TURBINE NOZZLE ASSEMBLY | 1 | |
| 2C6620 | TOOL SET,HOLDNG-COMPRESSOR ROT | 1 | |
| 2C6620G01 | TOOL SET,HOLDNG-COMPRESSOR ROT | 1 | |
| 2C6624 | FIXTURE,BUILD-UP-COMPRESSOR RO | 1 | |
| 2C6624G01 | FIXTURE,BUILD-UP-COMPRESSOR RO | 1 | |
| 2C6625 | MASTER,SET-UP-COMPRESSOR ROTOR | 1 | |
| 2C6625G01 | MASTER,SET-UP-COMPRESSOR ROTOR | 1 | |
| 2C6629G01 | PYLON, INDICATOR ‐ COMPRESSOR ROTOR BUILDUP | 4 | |
| 2C6635 | TOOL SET,SPACER-COMPRESSOR ROT | 1 | |
| 2C6635G01 | TOOL SET,SPACER-COMPRESSOR ROT | 1 | |
| 2C6646 -LMT | GAGE BLOCK, COMPRESSOR STATOR VANE ACTUATION ARM | 1 | |
| 2C6649G02 | NUT STARTING - COMPRESSOR ROTOR STG 3-9 | 1 | |
| 2C6800 | EYE, LIFT- COMPRESSOR ROTOR FWD | 1 | |
| 2C6800G02 | EYE, LIFT - COMPRESSOR ROTOR - FWD | 1 | |
| 2C6800G03 | EYE, LIFT - COMPRESSOR ROTOR | 1 | |
| 2C6803G01 | PROTECTOR, COMPRESSO | 1 | |
| 2C6816 LMT | WRENCH AIR DUCT COMPRESSOR ROTOR | 1 | |
| 2C6827 | ADAPTER, ASSY - LP COMPRESSOR | 1 | |
| 2C6856G04 | FIXTURE, LIFT ‐ FAN ROTOR AND LOW PRESSURE COMPRESSOR | 3 | |
| 2C6860 | ARBOR, BUILD UP - HIGH PRESSURE TURBINE ROTOR | 1 | |
| 2C6860G07 | FIXTURE,BUILD UP-HIGH PRESSURE TURBINE | 1 | |
| 2C6870 | FIXTURE HLDG STG 1 LOW PRESS TURB BLADE FMF 2C6861 | 1 | |
| 2C6870 REV A | FIXTURE, HOLDING STG. I LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C6871 | FIXTURE HLDG STG 2 LOW PRESS TURB BLADE FMF 2C6861 | 1 | |
| 2C6871 REV A | FIXTURE, HOLDING STG. 2 LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C6872 | FIXTURE HLDG STG 3 LOW PRESS TURB BLADE FMF 2C6861 | 1 | |
| 2C6872 REV A | FIXTURE, HOLDING STG. 3 LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C6873 | FIXTURE HLDG STG 4 LOW PRESS TURB BLADE FMF 2C6861 | 1 | |
| 2C6873 REV A | FIXTURE, HOLDING STG. 4 LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C6874 | GAGE, PROTRACTOR- LOW PRESSURE | 1 | |
| 2C6874 REV C | GAGE, PROTRACTOR- LOW PRESSURE | 1 | |
| 2C687I | FIXTURE, HOLDING STG. 2 LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C6888 | TOOL,INSTALLATION-COMPRESSOR R | 1 | |
| 2C6888G01 | TOOL,INSTALLATION-COMPRESSOR R | 1 | |
| 2C6888G03 | ADAPTER, BALANCE-STAGE 2 COMPRESSOR DRIVE AND BLAD | 1 | |
| 2C6934G04LW0096664 | PRESSURE TEST | 1 | |
| 2C6934P06 | CDP PAD - A SUMP PRESSURE TEST FIXTURE | 1 | |
| 2C6937 | ADAPTER, TORQUE, SET-COMPRESSOR ROTOR | 1 | |
| 2C6937 REV U | ADAPTER, TORQUE, SET-COMPRESSOR ROTOR | 1 | |
| 2C6937G01 | WRENCH SET - COMPRESSOR ROTOR | 1 | |
| 2C6937G05 | WRENCH SET - COMPRESSOR ROTOR | 1 | |
| 2C6937G08 | ADAPTER, TORQUE, SET ‐ COMPRESSOR ROTOR | 1 | |
| 2C6962G02 | GAGE, SIGHT - COMPRESSOR STATOR VANE ARMS | 1 | |
| 2C6962G05 | GAGE, SIGHT FOR VSV ACTUATION ARMS SPECIAL TOOL FOR HIGH PRESSURE COMPRESSOR IGV AND VSV VISUAL INDPECTION | 8 | |
| 2C6963 | GAGESET, COMPRESSOR STATOR VANE ACTUATION ARMS | 1 | |
| 2C6964G04 | WRENCH, TORQUE BREAKING, COMPRESSOR STATOR ACTUATION ARM RETAINING NUT | 3 | |
| 2C6966 | GAGE SET-COMPRESSOR STATOR ACTUATION ARMS | 3 | |
| 2C6966G05 | GAGE, SIGHT - COMPRESSOR STATOR VANE ACT ARMS 2C6966G05 | 7 | |
| 2C6966G07 | GAGE, SIGHT FOR VSV ACTUATION ARMS SPECIAL TOOL FOR HIGH PRESSURE COMPRESSOR IGV AND VSV VISUAL INDPECTION | 4 | |
| 2C6967G05 | TOOL INSTALLATION - COMPRESSOR ROTOR BLADE RETAINER, STAGE 2 | 1 | |
| 2C6967G06 | INSTALL. COMPRESSOR ROTOR BLADE RETAINER STOP | 2 | |
| 2C6967G07 | TOOL INSTALLATION - COMPRESSOR ROTOR BLADE RETAINE | 1 | |
| 2C6I4I | EYE, LIFT-HIGH PRESSURE TURBINE ROTOR AFT | 1 | |
| 2C6I72 | CASE, DUMMY - COMPRESSOR STATOR | 1 | |
| 2C6I77 | POSITIONER - BLADE, COMPRESSOR ROTOR | 1 | |
| 2C6I89 | ADAPTER, PRESSURE TABLE ADAPTER | 1 | |
| 2C6I97 | EYE, LIFT-HIGH PRESSURE TURBINE ROTOR | 1 | |
| 2C7085 | TOOL,CLAMP-COMPRESSOR ROTOR AI | 1 | |
| 2C7085G01 | TOOL,CLAMP-COMPRESSOR ROTOR AI | 1 | |
| 2C7140G01 | ADAPTER SET-COMPRESSOR ROTOR | 1 | |
| 2C7144 | FOXTURE,HOLDING-COMPRESSOR ROT | 1 | |
| 2C7144G01 | FOXTURE,HOLDING-COMPRESSOR ROT | 1 | |
| 2C7145 | FIXTURE,HOLDING-COMPRESSOR ROT | 1 | |
| 2C7145G01 | FIXTURE,HOLDING-COMPRESSOR ROT | 1 | |
| 2C7212 | FIXTURE,SHOT PEEN-COMPRESSOR B | 1 | |
| 2C7212G01 | FIXTURE,SHOT PEEN-COMPRESSOR B | 1 | |
| 2C7373G01 | SEATING TOOL, VANE LINER, COMPRESSOR STATOR CASE - FRONT & REAR | 1 | |
| 2C7373G02 | SEAT TOOL - COMPRESSOR STATOR FIXED VANES LINER INSTALLATION | 1 | |
| 2C7373G03 | SEATING TOOL, VANE LINER, COMPRESSOR STATOR CASE - FRONT & REAR | 1 | |
| 2C7373G04 | SEAT TOOL - COMPRESSOR STATOR FIXED VANES LINER INSTALLATION | 1 | |
| 2C7373G05 | SEATING TOOL, VANE LINER, COMPRESSOR STATOR CASE - FRONT & REAR | 1 | |
| 2C7373G06 | SEATING TOOL, VANE LINER, COMPRESSOR STATOR CASE - FRONT & REAR | 1 | |
| 2C7373G07 | SEAT TOOL - COMPRESSOR STATOR FIXED VANES LINER INSTALLATION | 1 | |
| 2C7373G08 | SEAT TOOL - COMPRESSOR STATOR FIXED VANES LINER INSTALLATION | 1 | |
| 2C7549 | FIXTURE, COMPRESSOR ROTOR BLADE LENGTH GAGE | 1 | |
| 2C7549 REV U | FIXTURE, COMPRESSOR ROTOR BLADE LENGTH GAGE | 1 | |
| 2C7842P31 | Gage Set, Length Compressor Stator Vanes | 1 | |
| 2C8016G01 | VSV Sight Gage (80C2) HPT Pressure Tube | 2 | |
| 2C8016G03 | GAGE, SIGHT FOR VSV STAGE 5 ACTUATION ARMS SPECIAL TOOL FOR HIGH PRESSURE COMPRESSOR IGV AND VSV VISUAL INDPECTION | 1 | |
| 2C8072 | FIXTURE,PRESSURIZE-HORIZONTAL DRIVE SHAFT HOUSING | 1 | |
| 2C8072G03 | GEARBOX SEAL PRESS. FIXT. TOOL | 1 | |
| 2C81145G01 | PRESSURE CHECK B-SUMP FIXTURE | 1 | |
| 2C81172 | ASSY TRUNNION FF/COMPRESSOR R | 1 | |
| 2C81172G01 | ASSY TRUNNION FF/COMPRESSOR R | 1 | |
| 2C81210G01 | SET, REMOVAL - BLADE LOCK, COMPRESSOR (BLADE LOCK REMOVAL SET) | 2 | |
| 2C81213G01 | SHIPPING COVER, COMPRESSOR INLET (COMPRESSOR INLET COVER) | 1 | |
| 2C81217G01 | Blankoff Plates − Compressor | 1 | |
| 2C81232G01 | CART, VG RIGGING, COMPRESSOR | 1 | |
| 2C81236G01 | FIXTURE, GENSPECT COMPRESSOR | 1 | |
| 2C81948 | PULLER, PLUGS, PRESSURE TEST - | 1 | |
| 2C81948G01 | PULLER, PLUGS, PRESSURE TEST - | 1 | |
| 2C90014 | DAMPENER, GRINDING, VANES COMPRESSOR, STATOR CT7-8 STG 1 | 1 | |
| 2C90298G01 | COMPRESSOR, CLEANING EQUIPMENT | 1 | |
| 2C90298G03 | SOLVENT-WATER PRESSURE CLEANER | 1 | |
| 2C90714G01 | T701C T701D>. FIXTURE, STAGE 2 GAS GENERATOR ROTOR FORWARD PRESSURE FLUSHING | 1 | |
| 2C90856G01 | SUPPORT BAR - CASING - COMPRESSOR | 1 | |
| 2C91008 | GAGE VARIABLE VANE ANGLE, COMPRESSOR STATOR | 1 | |
| 2C91008G01 | GAGE VARIABLE VANE ANGLE, COMPRESSOR STATOR | 1 | |
| 2C91008P01 | GAGE, COMPRESSOR STATOR VARIABLE VANE ANGLE | 1 | |
| 2C91016G01 | PULLER - LOW PRESSURE TURBINE ROTOR | 1 | |
| 2C91036G01 | FIXTURE - COMPRESSOR RUN OUT | 1 | |
| 2C91038G01 | HOLDER, COMPRESSOR STATOR CASING HALF | 1 | |
| 2C91039G02 | KIT - COMPRESSOR STATOR VANES | 1 | |
| 2C91044G01 | HANDLE, COMPRESSOR CASING | 1 | |
| 2C91046G01 | ADAPTER, HOIST - COMPRESSOR | 1 | |
| 2C91080G01 | SHAFT, SUPPORT, REAR, COMPRESSOR ROTOR | 1 | |
| 2C91081G01 | SUPPORT - REAR COMPRESSOR | 1 | |
| 2C91082P01 | ADAPTER - COMPRESSOR ROTOR | 1 | |
| 2C91092G01 | PULLER - 2ND STG. COMPRESSOR | 1 | |
| 2C91093G01 | PULLER - 2ND STG. COMPRESSOR | 1 | |
| 2C91100G01 | TOOL - COMPRESSOR CASE | 1 | |
| 2C91150G01 | SHROUD-BALANCE COMPRESSOR | 1 | |
| 2C91151G01 | SHAFT, STAGE 1 AND 2 COMPRESSOR BALANCE STUB | 1 | |
| 2C91152G01 | CRADLE-BALANCE COMPRESSOR | 1 | |
| 2C91160G01 | CRADLE, COMPRESSOR ROTOR ASSEMBLY BALANCE | 1 | |
| 2C91192G01 | FIXTURE-COMPRESSOR SUB ASSEMBLY | 1 | |
| 2C91193G01 | PUSHER-SEAL-COMPRESSOR | 1 | |
| 2C91194G01 | PULLER-SEAL-COMPRESSOR | 1 | |
| 2C91195G01 | ADAPTER, HOIST-FRONT COMPRESSOR | 1 | |
| 2C91241G01 | KIT - CHECK, FLOWARD PRESSURE | 1 | |
| 2C91349G01 | HOLDER, COMPRESSOR STATOR CASING HALF | 1 | |
| 2C91395G01 | GAGE, COMPRESSOR BLADE DOVETAIL INSPECTION | 1 | |
| 2E-24H | COMPRESSION TESTER EXTENSION HOSE | 1 | |
| 2E-60 | PRESSURE TESTER, DIFF. CYL. | 2 | |
| 2EM | TESTER: PRESSURE,DIFFERENTIAL, W/MASTER ORIFICE | 1 | |
| 2EM-18 | Aircraft Tool Supply 2EM-18 Pro 18mm Aircraft Engine Differential Cylinder Pressure Tester with Master Orifice | 1 | |
| 2EM-60 | DIFFERENTIAL PRESSURE TESTER WITH MASTER ORIFICE | 2 | |
| 2F10183 | Fixture, Pressure Test | 1 | |
| 2F10368 | #5 Pressure Block Off Plate - A1 only | 1 | |
| 2J12602 | Fixture, Pressure Test | 1 | |
| 2J12603 | FIXTURE, PRESSURE TEST | 1 | |
| 2J12604 | Fixture, Pressure Test | 1 | |
| 2J12605 | Fixture, Pressure Test | 1 | |
| 2J12606 | Fixture, Pressure Test | 1 | |
| 2LM0501-1 | GAGE KIT CABIN PRESSURE | 1 | |
| 2MIT65B90115 | ADAPTER - OIL SYSTEM DIFFERENTIAL PRESSURE SWITCH, RB211 ENGINE | 1 | |
| 2MIT65B92525 | PLUG SET - AUXILIARY FUEL TANK PRESSURE TEST | 1 | |
| 2P16248 | Adapter, Pressure Test | 1 | |
| 2R1484G01 | FIXTURE, PRESS - CASE | 1 | |
| 2RFL5 | PRESSURE GAUGE, 0 TO 200 PSI RANGE, 1/4 IN NPT, +/-1.00% GAUGE ACCURACY | 1 | |
| 2S0975-0000 | PRESSURE CHAMBER | 1 | |
| 2TE60B80099 | TEST SET - AUTOTHROTTLE SYSTEM TOTAL AIR TEMPERATURE/ ENGINE PRESSURE RATIO LIMIT (TAT/EPRL) | 1 | |
| 2TE65B07691 | PLUG - PRESSURE TEST | 1 | |
| 2TE65B07900 | PLUG - PRESSURE TEST | 1 | |
| 2TE65B07901 | PLUG - PRESSURE TEST | 1 | |
| 2TE65B07917 | APU DUCT PRESSURE TESTER | 9 | |
| 3-5290-T22 | SPRING COMPRESSION TOOL | 1 | |
| 3-5290-T22PM | TOOL-COMPRESSION,SPRING | 1 | |
| 3-5290T22 | TOOL-COMPRESSION,SPRING | 1 | |
| 3-544-01 | PRESSURE TEST CAP | 1 | |
| 3-544-02 | PRESSURE TEST CAP | 1 | |
| 3-554-01 | INLET AND OUTLET PRESSURE TEST CAPS | 1 | |
| 3-554-02 | INLET AND OUTLET PRESSURE TEST CAPS | 1 | |
| 3-619-01 | INLET - OUTLET PRESSURE TEST CAPS | 1 | |
| 3-619-02 | INLET - OUTLET PRESSURE TEST CAPS | 1 | |
| 3-8656 | PRESSURE PLUG WRENCH | 1 | |
| 3.051.000 | 305.1000 (HYDRAULIC PRESS) | 1 | |
| 30 1084S 02L 0/60 PSI | Pressure Test Gauge 60 PSI | 1 | |
| 30 PSI | PRESSURE GAUGE | 1 | |
| 30-1084-2B | Gauge Pressure - 0-60 PSI | 1 | |
| 30-1084-S-02L-0/60 PSI ASHCROFT | 3" PRESSURE GAGE WITH CERTIFICATE 1/4NPT LOWER CONNECTOR | 1 | |
| 30-1084S-02L-XC4-30 | PRESSURE GAUGE 0-30 PSI | 2 | |
| 30-1084S-20L-60# | 0-60 PSI PRESSURE GAUGE | 1 | |
| 30-1084S02L-100 | PRESSURE GAUGE, 100 | 1 | |
| 30-20745-D-02-L-160-PSI-X6BC4 | DIGITAL PRESSURE GAUGE | 1 | |
| 30-2074SD-2L-X6B-160PSI | 3"PRESSURE GAUGE,160PSI 1/4"NPT,LOWER MOUNT | 1 | |
| 30-2084SD-02L-160PSI | 3" DIGITAL PRESSURE GAGE | 1 | |
| 300 PSI | PRESSURE GAUGE AMS RIG MAEL/T/02100 | 1 | |
| 300.2000 | KUNZ MULTI LOCK SPRING PRESS | 1 | |
| 3000 | REGULATOR ASSY, O2 PRESSURE BREATHING Â | 9 | |
| 3000.2000 (KUNZ) | MULTI LOCK SPRING PRESS | 1 | |
| 3001415-1 | PRESSURE SWITCH ADAPTER TEST | 1 | |
| 3001S015 | CURING PRESS | 1 | |
| 3001S031 | PNEUMATIC DE-ICER TESTING CONSOLE (PRESSURE BAR, TEMO F) | 1 | |
| 300431-10 | LOW PRESSURE CHARGING UNIT 0-300 PSI | 1 | |
| 300BAR | PRESSURE GAUGE TOOL | 1 | |
| 301-763-701-0 | CORE ENGINE INLET PRESSURE PT25 | 1 | |
| 301084S02L0-100 | PRESSURE GAUGE | 1 | |
| 301084S02L0-30 | PRESSURE GAUGE | 1 | |
| 301084S02L0-300 | PRESSURE GAUGE | 1 | |
| 301084S02L0-30P | PRESSURE GAUGE 0-30 PSI | 1 | |
| 301084S02L0-60 | ASHCROFT 30-1084S 02L 60 PSI PRESSURE GAUGE 0 TO 60 PSI 3 INCH 1/4 INCH NPT | 1 | |
| 301084S02L0/300 | PRESSURE GAUGE | 1 | |
| 301084S02L0/30P | PRESSURE GAUGE 0-30 PSI | 1 | |
| 301084S02L0/60 | ASHCROFT 30-1084S 02L 60 PSI PRESSURE GAUGE 0 TO 60 PSI 3 INCH 1/4 INCH NPT | 1 | |
| 301084S02L400 | 0-400 PSI PRESSURE GAUGE | 1 | |
| 301084S2L300 | PRESSURE GAUGE | 1 | |
| 302-00102 | PRESSURE GAUGE | 1 | |
| 302084SD02LXC4200 | DIGITAL PRESSURE GUAGE | 1 | |
| 302089D02L5000 | PRESSURE GAUGE 0-5000 PSI | 1 | |
| 302089SD02L30 | PRESSURE GAUGE | 1 | |
| 302089SD02L500 | DIGITAL PRESSURE GAUGE ASHCROFT MODEL ( SPEC. +/-0.75 PSI ) ( VENDOR: ASHCROFT INC. ) | 1 | |
| 3022046-000 | PRESSURE CONTROL UNIT | 1 | |
| 3030 | PRESSURE GAGE 7000 PSI ±0.2%FS | 3 | |
| 30386-0159 | COMPRESSION FORCE GAUGE | 1 | |
| 304-00003 | GAUGE: PRESSURE,0-60PSI, PRESSURE TESTER | 3 | |
| 304-00004 | GAUGE: PRESSURE,0-200PSI, | 2 | |
| 304-00005 | GAUGE: PRESSURE,0-600PSI, PRESSURE TESTER | 4 | |
| 304-00006 | Digital Pressure Gauge 0-200 PSI .1 PSI Accuracy For 2311FA | 6 | |
| 304-00007 | Digital Pressure Gauge/0-500 PSI/0.1 PSI Accuracy/2311FA | 3 | |
| 304-00100 | Pressure Gauge/Inspector Accuracy/0-60 PSI/2311FA | 4 | |
| 304-00101 | Barfield 304-00101 Pressure Gauge, 0 to 100 psi, For Fixed Wing Aircraft | 4 | |
| 304-00102 | Pressure Gauge/Inspector Accuracy/0-160 PSI/2311FA | 3 | |
| 304-00103 | Pressure Gauge/Inspector Accuracy/0-300 PSI/2311FA | 3 | |
| 304-00104 | Pressure Gauge/Inspector Accuracy/0-600 PSI/2311FA | 3 | |
| 304-00107 | GAUGE: PRESSURE,0-30PSI, 1811 SERIES | 2 | |
| 304-00109 | Pressure Gauge 0-200 PSI For 2311FA | 4 | |
| 3042000F7 | Spring Compressor | 1 | |
| 30446-0033 | MECHANICAL FORCE GAUGE (COMPRESSION) | 1 | |
| 3048A0000-01 | PRESS IN FIXTURE | 1 | |
| 305.1000 | MANUAL HYDRAULIC PRESS | 1 | |
| 3050A0000-01 | PRESS IN FIXTURE | 1 | |
| 3051A0000-01 | PRESS IN FIXTURE | 1 | |
| 3052A0000-01 | PRESSURE SWITCH | 1 | |
| 3055831-02 | BLADE COMPRESSOR | 1 | |
| 3056A0000-01 | PRESS IN MANDRELL | 1 | |
| 3057362-01 | SEAL RING, METAL, COMPRESSION, U-SHAP | 1 | |
| 3059-0001 | PRESS FIXTURE | 1 | |
| 3059A0000-01 | PRESS FIXTURE | 1 | |
| 3064A000-001 | Pressure Switch | 1 | |
| 3071132-01 | BLADE COMPRESSOR | 1 | |
| 30B4476-01 | WASHER, KEY, NOSE CONE (COMPRESSOR INLET CONE) | 1 | |
| 30FT PRESS WASHER HOSE | 30FT PRESS WASHER HOSE | 1 | |
| 30G1412 | PIN SHOULDER COMPRESSOR STATOR SYNCHRONIZING RING ARM | 1 | |
| 30G2664 | PIN SHOULDER COMPRESSOR STATOR SYNCHRONIZING RING ARM | 1 | |
| 30G2994 | ARM ASSY OF COMPRESSOR STATOR SYNCHRONIZING RING | 1 | |
| 30G2995 | ARM ASSY OF COMPRESSOR STATOR SYNCHRONIZING RING | 1 | |
| 30M-0012 | Strut Servicing Pressure Gauge (equivalent to 10M-9403) | 1 | |
| 30P782512000-501 | LEFT PRESSURE TUBE | 1 | |
| 30PSI | PRESSURE GAUGE PILOT VALVE TOOL | 1 | |
| 310816UCK221 | PORTABLE AIR COMPRESSOR | 1 | |
| 3112 | Portable Live Pressure Calibration and Test System | 1 | |
| 3114302-01 | COMPRESSOR WASH ADAPTOR | 2 | |
| 31169-9950 | ADAPTER, PRESSURE TEST | 1 | |
| 312-800-B | GAUGE, PRESSURE, 100 PSI, 700 KPA, DUAL SCALE | 1 | |
| 3121033-01 | NOZZLE COMPRESSOR WASH | 1 | |
| 3122-04-53 | PRESSURE & LOAD GAUGE | 1 | |
| 314STD-53-0007 | FUSELAGE – REPLACEMENT OF THE PRESSURE TUBE SUPPORT OF THE FUEL SYSTEM | 1 | |
| 314T05924-401 | CAPS, PRESSURIZATION TEST | 1 | |
| 315BAR0RMANGAUGE | PROCESS PRESSURE GAUGE PHENOLIC CASE 115MM 0~2000 PSI | 1 | |
| 316SS | INDUSTRIAL PRESSURE/PROCESS GAUGE, 4" DIA, 316SS DIAPHRAGM; 0 TO 100 PSI | 1 | |
| 3170007-1 | DIPSTICK,OIL FREON COMPRESSOR | 1 | |
| 3170007-801 | DIPSTICK,OIL FREON COMPRESSOR | 2 | |
| 3170009-1 | WING FUEL TANK PRESSURE CART | 1 | |
| 3170019-1 | REFRIGERATION PRESSURE SWITCH TEST | 1 | |
| 3170022-1 | OIL PRESSURE TRANSMITTER TEST | 1 | |
| 3171626-3 | SWITCH PRESSURE PNEUMATIC | 1 | |
| 3176-4 | BEARING ASSEMBLING PRESS-IN FIXTURE | 1 | |
| 3179T000 | SPRING COMPRESSOR (2IT) | 1 | |
| 318-630-1001-034 | LIGHT ASSEMBLY-PRESS TO TEST INDICATOR, | 2 | |
| 32-01055-1T1 | TOOL- PRESS | 1 | |
| 32-01055-1T2 | TOOL, PRESS | 1 | |
| 32-2 | PRESSURE PLATE (SV) | 3 | |
| 3204KTQ-03 | ENGINE PRESSURE RATIO TESTER | 1 | |
| 3204KTQ03 | ENGINE PRESSURE RATIO TESTER | 1 | |
| 3204KTQ1 | ENGINE PRESSURE RATIO-AIR DATA TESTER | 1 | |
| 3207KTQ-1-002 | ENGINE PRESSURE RATIO TESTER. | 1 | |
| 3214102-4 | SERVICE PRESS REGULATOR | 1 | |
| 3215086-3 | VALVE - PRESSURE REGULATING | 1 | |
| 3218AS551-1 | SERVICE ADAPTER, PRESSURE, T-3 | 1 | |
| 3218AS551-2 | SERVICE ADAPTER, PRESSURE, T-5 | 1 | |
| 323-2930GAUGE | NICOPRESS #2930 GO/NO-GO GAUGE | 1 | |
| 323-50 | GAUGE,PRESS, 232-50 , 0-1.6 BAR,1 /2NPT,100 GAUGES, PRESSURE RANGE 0 TO 1.6 BAR CONNECTION, PROCESS 1/2 IN NPT SIZE 100 MM (DIAMETER) | 1 | |
| 323-51-P-850 | NICOPRESS 51-P-850 MANUAL SWAGING TOOL | 1 | |
| 32677-100 | WASHCART COMPRESSOR | 1 | |
| 32677-300 | COMPRESSOR WASH MERAH | 1 | |
| 329452-10 | TYRE PRESSURE ADJUSTMENT TROLLEY | 1 | |
| 3300 | SUPPRESSOR, | 9 | |
| 3322-000 | PRESSURIZATION KITS | 1 | |
| 3324-600 | PRESSURIZATION AND TIRE INFLATION OPERATIONS (NITROGEN ONLY) | 1 | |
| 3324-700-1 | DIGITAL PRESSURE GAUGE (NITROGEN AND MIL-H-83282-5606) | 1 | |
| 3324-701-1 | DIGITAL PRESSURE GAUGE (NITROGEN AND SKYDROL) | 1 | |
| 332A91-3111-01 | PRESSING-IN TOOL | 1 | |
| 332A973404.00 | AIR & GLYCOL PRESSURE | 1 | |
| 3333-100 | DIGITAL PRESSURIZATI | 1 | |
| 33410570-4 | ADAPTER STATIC PRESSURE SENSOR | 1 | |
| 33410570B | PROTECTOR STATIC PRESSURE | 1 | |
| 33410B-67 | PROTECTOR – STATIC PRESSURE SENSOR | 3 | |
| 33410B-67 | STATIC PRESSURE SEN PROTECTOR | 3 | |
| 33410B−67 | Protector − Static Pressure Sensor | 3 | |
| 33410LH-125-4 | STATIC PRESSURE TEST ADAPTER | 21 | |
| 33410MC-125-4 | PRESSURIZATION PORT TEST ADAPTOR | 2 | |
| 33410S-70-4 | ADAPTOR - STATIC PRESSURE SENSOR | 6 | |
| 33410S70-4 | ADAPTOR - STATIC PRESSURE SENSOR | 6 | |
| 33410S70B | Protector − Static Pressure Sensor | 9 | |
| 33410S70−4 | Adapter − Static Pressure Sensor | 6 | |
| 3343090F | ADAPTER - PRESSURE TEST | 1 | |
| 33433M1-70 | STATIC PRESSURE SENSOR COVER | 8 | |
| 33433M1???70 | PROTECTOR ??? STATIC PRESSURE SENSOR | 8 | |
| 33433M1−70 | Protector − Static Pressure Sensor | 8 | |
| 33433MI-70 | PROTECTOR STATIC PRESSURE SENSOR | 1 | |
| 33433MI−70 | Protector − Static Pressure Sensor (Optional) | 1 | |
| 337-105 | FORWARD ENGINE INLET PLUGS (PRESSURIZED & TURBO MODELS) (set of 4) | 1 | |
| 337-541-9101 | FILTER, FLUID PRESSURE/LIMITER FOR USE IN DORNIER 228NG | 1 | |
| 337-900 | WINDSHIELD HEATSHIELD (NOT PRESSURIZED) | 1 | |
| 337-905 | WINDSHIELD HEATSHIELD (PRESSURIZED) (set of 2) | 1 | |
| 337-910 | HEATSHIELD SET (NOT PRESSURIZED) (set of 7) | 1 | |
| 337-915 | HEATSHIELD SET (PRESSURIZED) (set of 12) | 1 | |
| 34-214C | C-YOKE COMPRESSION RIVETER | 1 | |
| 34-720C | COMPRESSION RIVETER, USATCO 34-720C | 2 | |
| 34-725AA-1-1/2 | RIVETER,COMPRESSION HIGH FORCE | 1 | |
| 3402684-39 | "BRAKE PRESSURE AND BLEED UNIT GAGE | 6 | |
| 3402811-1 | DIFFUSER BLEED PRESSURE TEST SET (ENGINE) | 1 | |
| 3403215-1 | ADAPTER, HIGH PRESSURE OXYGEN SERVICE | 1 | |
| 3410K82 | ULTRA SONIC CLEANER / CHECK RAT CHECKOUT MODULE CASE DRAIN AND PRESSURE FILTERS | 1 | |
| 342-8631 | PRESSURE METER | 1 | |
| 343 | Pressure/Vacuum Test Set | 8 | |
| 3425 | LIFT, COMPRESSOR ROTOR | 3 | |
| 3435 | SLING,COMPRESSOR ROTOR | 3 | |
| 345395B3 | FESTO PRESSURE GAUGE | 1 | |
| 3464-4 | WRENCH, NUT, COMPRESSOR, EXTENSION | 2 | |
| 3464-5 | WRENCH, NUT, COMPRESSOR, EXTENSION | 1 | |
| 347-3001-14GSE | ADAPTER, PRESSURE RELIEF DOOR-ENGINE | 2 | |
| 3482 | HOLDER,COMPRESSOR ROTOR FWD SPLINE | 1 | |
| 3497T11 | COMPRESSION TOOL | 1 | |
| 35-06 | HIGH PRESSURE HYDRAULIC HOSE 20' | 1 | |
| 35-1009-SW-02L-100 | PRESSURE GAUGE 0-100 | 1 | |
| 35-1009-SW-02L-1000 | PRESSURE GAUGE 0-1000 | 1 | |
| 35-1009-SW-02L-200PSI | PRESSURE GAGE (2 REQUIRED (0 TO 300 PSIG (0 TO 2068 KPA), ±1% OF FULL SCALE) (ASHCROFT) | 1 | |
| 35-1009-SW-02L-400 | PRESSURE GAUGE 0-400 PSI | 1 | |
| 35-1009-SW-02L-4000 | PRESSURE GAUGE 0-4000 PSI | 1 | |
| 35-92076-0003 | COMPRESSOR CLEANING EQUIPMENT | 1 | |
| 35-92175-0003 | PRESSURE GAUGE KIT - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 35-92180-0001 | COMPRESSOR KIT, ICE PROTECTION AND AIR CONDITIONING SYSTEM - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 350-3-0180 | HOSE ASSY HI PRESS. | 4 | |
| 350-3-0840 | HOSE ASSY HI PRESS. | 2 | |
| 35001-1C | EQUIP TEST PRESS. OXYGEN CREW | 1 | |
| 35004-0-2000 | Gear Press Fixture | 1 | |
| 35009-0-2000 | Bearing Press Fixture | 1 | |
| 35066GV08 | COUPLING ADAPTER, PRESSURE TEST, ACT | 2 | |
| 350A37-1244-20 | LOW PRESSURE PUMP WITH ALTERNATOR ASSEMBLY | 1 | |
| 350A93-3502-00 | TAIL TRANSMISSION BEARING PRESSURE MOUNTING TOOL | 1 | |
| 350A93-7200-00 | COMPRESSOR BELT INSTALLATION TOOLING | 1 | |
| 350A93720002 | COMPRESSOR-BELT INSTALL TOOL | 1 | |
| 350A94-3250-00 | COMPRESSOR CENTRE DISTANCE CHECKING TOOLS | 1 | |
| 350PSI | PRESSURE GAUGE TOOL | 1 | |
| 351-3000-26GSE | PDR PORT PRESSURE RELIEF | 3 | |
| 351009AW02LXC4FWNN160 | PRESSURE GAUGE | 1 | |
| 351009SW02L100 | PRESSURE GAUGE 0-100 | 1 | |
| 351009SW02L1000 | PRESSURE GAUGE 0-1000 | 1 | |
| 351009SW02L400 | PRESSURE GAUGE 0-400 PSI | 1 | |
| 351009SW02L4000 | PRESSURE GAUGE 0-4000 PSI | 1 | |
| 351101FAS STD-413 | OXYGEN TEST PRESSURE GAUGE KIT | 1 | |
| 351GSE3008-901 | PRE-NEP PRESSURE RELIEF LATCH TESTER A 350 | 1 | |
| 3550-1030 | PRESSURE REGULATOR | 1 | |
| 3552 | Arbor Press | 1 | |
| 3571222-2002 | INDICATOR, OIL PRESSURE | 1 | |
| 3582T1 | MULTIDIAMETER COMPRESSION TOOL | 1 | |
| 3585F FERROX PLUS | COMPRESSION SPRAYER 6 BAR | 1 | |
| 35W1005PH02L160 | GAUGE, PRESSURE, 0-160 PSI, +/-3-2-3PERCENT | 1 | |
| 36-11-0508 | PRESSURE GAUGE | 1 | |
| 36-11-0523 | PRESSURE GAUGE | 1 | |
| 3600-25 | ULTRA LIGHT AIR HOSE ( INNER DIAMETER: 1/4" )( MAXIMUM WORKING PRESSURE: 300 PSI )( OUTER DIAMETER: .472" )( OVERALL LENGTH: 25' (7.6 M) )( TYPE: STANDARD HOSE ) | 1 | |
| 3600-50 | ULTRA LIGHT AIR HOSE ( INNER DIAMETER: 1/4" )( MAXIMUM WORKING PRESSURE: 300 PSI )( OUTER DIAMETER: .472" )( OVERALL LENGTH: 50' (15.2 M) )( TYPE: STANDARD HOSE ) | 1 | |
| 3601 | PISTON RING COMPRESSOR | 1 | |
| 3602 | VALVE SPRING COMPRESSOR | 1 | |
| 360A91330000 | PRESS OUT CUFF BUSHINGS TOOL (SAP CODE 8334911) | 1 | |
| 361-054-01 | CLEANER COMPRESSOR 25L | 1 | |
| 3618 | PISTON RING COMPRESSOR FLEXIBLE BAND TYPE FOR 4-7/16 BORE ENGINES | 1 | |
| 3648 | TYRE PRESSURE GAUGE | 1 | |
| 365A58117300 | PROTECTION INPUT AXIAL COMPRESSOR | 1 | |
| 365A94-8280-00 | ALIGNMENT TOOL, PULLEY-COMPRESSOR | 1 | |
| 368192-101 | PRESSURE SWITCH | 1 | |
| 368192-105 | PRESSURE SWITCH | 1 | |
| 368192-111 | PRESSURE SWITCH | 1 | |
| 369D29985 | BUNGEE SPRING COMPRESSOR TOOL ROD & CHANNEL | 1 | |
| 36A27374651006W64 | 1#SPRING COMPRESSOR | 1 | |
| 3727324-1 | PRESSURE TEST FIXTURE ASSEMBLY | 1 | |
| 3727380-1 | PRESS AND STAKING FIXTURE | 1 | |
| 3732 | HOLDER - COMPRESSOR EXTENSION SHAFT ASSEMBLY | 2 | |
| 3755 | HOLDER, COMPRESSOR EXTENSION SHAFT FORWARD SPLINE | 2 | |
| 3755T15 | Wire Rope Compression Sleeve - for Lifting for Stainless Steel and Steel Rope 18-8 Stainless Steel for 18 Rope Diameter | 2 | |
| 3755 | COMPRESSOR HOLDER | 2 | |
| 3762 | GUIDE PIN - COMPRESSOR ROTOR FRONT BEARING CAP | 3 | |
| 37865-0-2000 | BEARING PRESS | 1 | |
| 37865-0-2000 PM | BEARING PRESS | 1 | |
| 37866-0-2000 | BEARING PRESS | 1 | |
| 37866-0-2000 PM | BEARING PRESS | 1 | |
| 37868-0-2000 | BEARING PRESS | 1 | |
| 37868-0-2000 PM | BEARING PRESS | 1 | |
| 37876-0-2002 | Rotor Bearing Press | 1 | |
| 37876-0-2002 PM | ROTOR BEARING PRESS | 1 | |
| 37876-0-2002PM | ROTOR BEARING PRESS | 1 | |
| 3791068-1 | FIXTURE PIN PRESS | 1 | |
| 3791274-1 | Wheel Press Fixture | 1 | |
| 3791276-1 | Wheel Press Fixture | 1 | |
| 3791896-1 | Bearing press tool | 1 | |
| 3792195-1 | GAUGE - PRESSURE | 9 | |
| 37N00001-1 | EQUIPMENT - TEST DECOMPRESSION | 1 | |
| 37N00001-3 | TOOL - DECOMPRESSION SIMULATOR TOOL | 6 | |
| 37N0001-3 | DECOMPRESSION SIMULATOR | 1 | |
| 381075-008 (OBSOLETE) | TRANSMITTER,PRESSUR | 1 | |
| 3815-2001FAS | POTABLE WATER TANK PRESSURE SWITCH CHECK | 1 | |
| 38258-0-2000 | BEARING PRESS | 1 | |
| 38258-0-2000 PM | BEARING PRESS | 1 | |
| 38259-0-2002 | SPRING PIN PRESS | 1 | |
| 38259-0-2002 PM | SPRING PIN PRESS | 1 | |
| 383-200600-01 | 5-PORT PRESSURE MANIFOLD | 1 | |
| 383-200650-01 | PRESSURE MANIFOLD | 1 | |
| 383-202600-01 | PRESSURE MANIFOLD | 1 | |
| 383-202600-02 | PRESSURE MANIFOLD | 1 | |
| 3831TD13821 | Assy Kit, Vacuum Pressure Test, LAV Waste System | 1 | |
| 3834K311 | PRESSURE GAUGE 0-5000 PSI | 1 | |
| 3838 | Puller â Compressor Extension Shaft Bearing Housing | 2 | |
| 3852K999 | PRESSURE GAUGE-100 PSI WITH FLUID | 1 | |
| 3855 | WRENCH, COMPRESSOR REAR BEARING NUT | 3 | |
| 38702-7 | GAUGE-PRESSURE (0-120 PSI) | 1 | |
| 3876255-2 | LOW OIL PRESSURE SWITCH | 1 | |
| 3885011-1 | TUBE ASSY-TOTAL PRESS | 1 | |
| 389-3L | DIAL INDICATING PRESSURE GAGE | 1 | |
| 389A | NDT REF.SLOTS,REAR PRESS.B/HD | 1 | |
| 389B | NDT REF.SLOTS,REAR PRESS.B/HD | 1 | |
| 39-2120-0-6209 | STATIC PRESSURE KIT | 1 | |
| 390500AT16 | ASSEMBLY TOOL, SPRING COMPRESSOR | 1 | |
| 390580TF1 | TEST FIXTURE, PRESSURE SENSOR | 1 | |
| 390598TF51-1001 | TEST BOX, PRESSURE SENSOR | 1 | |
| 3914T4 | COMPRESSION SLEEVE | 1 | |
| 3A2984-1 | FIXTURE,PRESSURIZE-HORIZONTAL DRIVE SHAFT HOUSING | 3 | |
| 3A3579-1 | ADJUSTMENT TOOL, PRESSURE RELIEF VALVE | 1 | |
| 3A3710 | BAR LOCK PRESSURE RELIEF | 1 | |
| 3A3710-1 | BAR LOCK (PRESSURE RELIEF VALVE) CLAMP | 2 | |
| 3AA3600 | BOTTLE - NITROGEN CART - SERVICING, STRUT OIL INFLATOR - STRUT, LANDING GEAR GAUGE - PRESSURE, 0-3000 PSIG (0-20685 KPA) WRENCH - TORQUE BUCKET - 2.5 GALLON CAPACITY | 1 | |
| 3C3504G01 | SUPPORT,LOW PRESSUR | 1 | |
| 3F | PRESSURE BLANK TOOL | 1 | |
| 3FT | 3' STAINLESS HIGH PRESSURE HOSE | 1 | |
| 3G2810V00751 | PRESSURE SWITCH | 1 | |
| 3G2905G00332 | ADAPTER ASSEMBLY, PCM PRESSURE LINE | 1 | |
| 3G2920A04431 | PIPE ASSEMBLY (PRESSURE AUX SYSTEM II) | 1 | |
| 3G3240V00831 | WHEEL BREAK PRESSURE | 1 | |
| 3G6340V00451 | OIL PRESSURE SENSOR | 1 | |
| 3G7505G00131 | PRESSURE TEST, E.A.P.S. HOSE (SIZE 12) (GF-89-00) OR PRESSURE TEST, E.A.P.S. HOSE (SIZE 10) (GF-92-00) OR 3G7505G00132 | 1 | |
| 3G7505G00132 | PRESSURE TEST, EAPS HOSE, SIZE 10 | 1 | |
| 3G7505G00231 | PRESSURE GAUGE | 1 | |
| 3GZZ300015 | ENGINE COMPRESSOR CLEANING HOSE | 1 | |
| 3M | PRESSURE BLANK TOOL | 1 | |
| 3PR | LOW PRESSURE REGULATOR | 1 | |
| 3SF3715 | GALLEY WATER PRESSURE TEST. | 1 | |
| 3SF5701-501 | HORIZONTAL DR. GEARBOX COMPRESSOR | 1 | |
| 3SF5890-501 | FUEL/OIL BYPASS PRESSURE SWITCH | 1 | |
| 3SF6149-501 | KIT, STATIC PRESSURE, DIGITAL MEASUREMENT | 1 | |
| 3T6521A00146W142C | SEAL PRESS TOOL | 1 | |
| 3T6522A00231W142AK | TAIL ROTOR GEAR BOX/MAST OUTPUT OIL SEAL ASSEMBLY PRESS TOOL | 1 | |
| 3TE60B80099 | TEST SET - AUTOTHROTTLE SYSTEM TOTAL AIR TEMPERATURE/ ENGINE PRESSURE RATIO LIMIT (TAT/EPRL) | 1 | |
| 3TE65B001102 | TEST EQUIPMENT - PRESSURE PLUG, JETTISON PUMP SEAL | 1 | |
| 3TE65B00112 | SEAL PLUG - WING ACCESS DOOR PRESSURE TEST | 1 | |
| 3TE65B07900 | PLUG - PRESSURE TEST | 1 | |
| 3TE65B07901 | PLUG - PRESSURE TEST | 1 | |
| 3TE65B40017 | TEST EQUIPMENT - PRESSURE RELIEF VALVE INSTALLATION STA. 770 | 1 | |
| 4-10XHU6-SS MS33514 | ADPATER, PRESSURE | 1 | |
| 4-11241 | BUSHING PRESS FIXTURE | 1 | |
| 4-8XHU6-SS MS33514 | ADAPTER - PRESSURE (3/4-INCH FITTING AT ONE END AND AIR SHOP FITTING AT THE OTHER END) | 1 | |
| 4-8XHU6-SS MS35514 | ADAPTER, PRESSUFRE | 1 | |
| 4.92001E 12 | FWD PRESSURE, FLUSH FIXTURE, STAGE 1 ROTOR | 1 | |
| 40.901-5000PSI-1/4NPT | PRESSURE GAUGE | 1 | |
| 40006-1A44 | QAD TOTAL PRESSURE | 1 | |
| 4001-65-6-4 | VALVE, REGULATING FLUID PRESSURE | 1 | |
| 40057-1 | FUEL PRESS SWITCH | 1 | |
| 4006-1A-44 | CONNECTOR-MALE - TOTAL PRESSURE SYSTEM | 1 | |
| 4006-1B-45 | CONNECTOR-MALE - STATIC PRESSURE SYSTEM | 1 | |
| 400PSI | PRESSURE GAUGE TOOL | 1 | |
| 403589-1 | PRESS ASSY, PORTABLE, MLG SEAL | 1 | |
| 4036AT | PRESSURE REGULATING VALVE | 1 | |
| 403809-002 | OIL PRESSURE SWITCH | 1 | |
| 4040701-001 | TOOL SIGHT GLASS REMOVAL FOR COMPRESSOR | 1 | |
| 4041041-001 | FIXTURE, COMPRESSOR HOLDING | 1 | |
| 4041104-001 | HARNESS,HI-POT COMPRESSOR/FAN INTERCONNECTING CABLE BE AEROSPACE | 1 | |
| 4041104-002 | HARNESS,HI-POT COMPRESSOR/FAN INTERCONNECTING CABLE BE AEROSPACE | 1 | |
| 404184-1 | BRAKE PRESSURE GAGE | 1 | |
| 404184-5 | BRAKE PRESSURE AND BLEED UNIT GAGE ASSEMBLY | 1 | |
| 4050024-001 | STAND, COMPRESSOR | 1 | |
| 4050024-002 | STAND, COMPRESSOR | 1 | |
| 4053K15 | PRESSURE GAUGE 0-5000PSI | 1 | |
| 40543264ST | PISTON SEAT PRESSURE TEST | 1 | |
| 406-240-001-101 | PTP SEALING PRESS | 1 | |
| 4088K42 | PRESSURE GAGE 138 BAR ( 2000PSI) | 1 | |
| 40A100 | CONTROL PRESSURE | 3 | |
| 41-11-2529 | HOSE ASSEMBLY, HIGH PRESSURE, 36" L, 10K PSI W/QC | 1 | |
| 41-11-2530 | HOSE ASSEMBLY, LOW PRESSURE, 36" L, 250 PSI, 3/8" NPT / QC | 1 | |
| 4100362-T-1 | PRESSING TOOL | 1 | |
| 410107-01 | HIGH PRESSURE CAP; ADAMS RITE AEROSPACE | 1 | |
| 4106K22 | Gauge Differential Pressure | 1 | |
| 41097A010002 | INTERMEDIATE PRESSURE CHECK VALVE | 1 | |
| 4110-078-01 | OXYGEN PRESSURE GAUGE | 1 | |
| 4110-20 | HIGH-PRESS REGULATOR | 1 | |
| 412-240-018-101 | PRESSING TOOL SET | 1 | |
| 41249B | SPRING COMPRESSION .135 | 1 | |
| 4137-400 | KIT INDICATORE PRESSIONE DIFFERENZIALE RITORNO E LINEA DRENAGGIO POST PTA 243 | 1 | |
| 41408-T601 | PRESSING FIXTURE | 1 | |
| 41446-T601 | PRESSING TOOL | 1 | |
| 414ES100-10 | GAGE PRESSURE DIAL INDICATOR | 1 | |
| 416.5650 | COMPRESSOR, RECOV-ERY | 1 | |
| 4160240-1 | SEAL COMPRESSION TOOL (3IT) | 1 | |
| 4160256-1 | PRESSURE PICKUP | 1 | |
| 41759T600 | PRESSING TOOL | 1 | |
| 41759T601 | PRESSING TOOL | 1 | |
| 41771T603 | PRESSING TOOL | 1 | |
| 41771T604 | PRESSING TOOL | 1 | |
| 418-09104 | TRANSMITTER - ENG OIL PRESSURE | 1 | |
| 418-14064 | PRESSURE TX | 1 | |
| 418-17054 | FUEL PRESSURE TRANSMITTER | 5 | |
| 418W1017-20 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 8 | |
| 419300TF50-1001 | DELTA-DELTA PRESSURE/LOAD LIMITER SOLENOID INTERFACE | 1 | |
| 4199-1 | SQUIB,PRESSURE | 1 | |
| 41GA81 | APU FUEL CTL CRACK PRESS TEST SET | 1 | |
| 41SG265-1 | PRESSURE TRANSDUCER | 6 | |
| 42-27-04-021 | VEE BLOCK OF THE ABOVE MENTIONED SPECIAL PRESSING TOOL | 1 | |
| 42-903-04-050 | SPECIAL PRESSING TOOL FOR FITTING THE INNER OF RACES B | 1 | |
| 421GGS0160-1 | COVER, CABIN PRESS STATIC PORT | 3 | |
| 422370M0NT2-1 | LOWER PRESS TOOL | 1 | |
| 422370M0NT2-2 | UPPER PRESS TOOL | 1 | |
| 423085M0NT6-1 | PRESS TOOL TO FIT THE SLEEVE BEARING IN THE HANDWHEEL | 1 | |
| 423085M0NT6-2 | PRESS TOOL TO FIT THE SLEEVE BEARING IN THE HANDWHEEL | 1 | |
| 42315-60-221 | SPRING COMPRESSION FIXTURE | 1 | |
| 424552M0NT1-1 | PRESS TOOL TO DISASSEMBLR THE BEARING | 1 | |
| 425-200-346 | PRESSURE REGULATOR | 2 | |
| 4259-20 | MODIFIED PLUG/ PRESS TESTING | 1 | |
| 42770T600 | PRESSING TOOL | 1 | |
| 42885T600 | PRESSING TOOL | 1 | |
| 429-242-001-101 | PRESS SLEEVE | 1 | |
| 429-242-005-101 | PRESS SLEEVE | 1 | |
| 42D49C | DIFF. PRESSURE SWITCH | 1 | |
| 43040-301-01 | COMPRESSOR UNIT, REC | 1 | |
| 4306065051-1000 | LINE TESTER - TIRE PRESSURE MONITORING SYSTEM (TPMS) | 2 | |
| 43100-20-2000-X | BEARING PRESS ASSEMBLY | 1 | |
| 43100-20-2025-X | BEARING PRESS | 1 | |
| 43100-20-2035 | BEARING PRESS | 1 | |
| 43454-T601 | PRESSING TOOL | 1 | |
| 44-1002-24 | Pressure regulator | 1 | |
| 44-11-1124 | LOW PRESSURE REGULATOR | 1 | |
| 44-1111-24 | LOW PRESSURE REGULATOR | 1 | |
| 44-1112-24 | PRESSURE REGULATOR(FOR LP CART) | 1 | |
| 44-1114-24 | TEST REGULATOR 0 - 2500 PSIG OUTLET PRESSURE (44-1110 SERIES) | 2 | |
| 44-1115 | OUTLET PRESSURE 200 BAR & INLET PRESSURE 300 BAR | 1 | |
| 44-1115-24 | HIGH PRESSURE REGULATOR | 1 | |
| 44-1116-24 | TESCOM HIGH PRESSURE REDUCING REGULATOR-BRASS | 1 | |
| 44-1125-26-165 | HIGH PRESSURE REGULATOR | 1 | |
| 44-1163-24 | TESCOM LP PRESSURE REDUCING REGULATOR | 1 | |
| 44-1165-24 | TESCOM PRESSURE REDUCING REGULATOR | 1 | |
| 44-1315-2082-005 | PRESSURE REGULATOR, | 1 | |
| 44-1326-2081 | Pressure relief valve | 1 | |
| 44-1812-24 | PRESSURE REDUCING REGULATOR | 1 | |
| 44-2213-241 | PRESSURE REGULATOR | 1 | |
| 44-22P4 | LOW-PRESSURE REGULATOR | 1 | |
| 44-3212H263-003 | PRESSURE REGULATOR | 1 | |
| 44-4600S24 | PRESSURE REGULATOR | 1 | |
| 44-460S24 | PRESSURE REGULATOR | 1 | |
| 44-4660S24 | PRESSURE REGULATOR | 1 | |
| 44-5215-243 | PRESSURE REGULATOR | 1 | |
| 44006-06A-E17/44010-10A-E17 | HYDRAULIC PRESS/RETURN COUPLING KIT | 1 | |
| 44008-08A-E17 | COUPLING, HYDRAULIC PRESSURE (2) | 1 | |
| 44012-12A-E17 | HYDRAULIC OIL PRESSURE OIL CONNECTION ADAPTER | 1 | |
| 44108-T600 | PRESSING TOOL | 1 | |
| 44301-405 | COMPRESSION SPACER | 1 | |
| 444-65255-000 | TEST TOOL FOR PRESSURE GAUGE REMOTE PLUG (YOU LIST THIS ON PARTSBASE) | 1 | |
| 4441077-104 | OXYGEN CYLINDER PRESSURE REGULATOR | 1 | |
| 4441147-006 | LOW PRESSURE QUICK DISCONNECT (LP QD) COUPLING | 2 | |
| 4441730-000 | TOOL-PRESSURE REGULATOR,O2 | 1 | |
| 4448006-000 | HIGH PRESSURE QUICK DISCONNECT | 2 | |
| 450-2-3100-00 | SWITCH, PRESS | 7 | |
| 450A5663 | PRESSURE RELIEF VALVE | 1 | |
| 4600004330-154 | PRESS PAD | 1 | |
| 4600004330/154 | PRESS PAD | 1 | |
| 460001794-1 | PRESSURE TEST BUNG | 1 | |
| 460001794-10 | PRESSURE TEST BUNG | 1 | |
| 460001794-11 | PRESSURE TEST BUNG | 1 | |
| 460001794-12 | PRESSURE TEST BUNG | 1 | |
| 460001794-13 | PRESSURE TEST BUNG | 1 | |
| 460001794-14 | PRESSURE TEST BUNG | 1 | |
| 460001794-15 | PRESSURE TEST BUNG | 1 | |
| 460001794-16 | PRESSURE TEST BUNG | 1 | |
| 460001794-17 | PRESSURE TEST BUNG | 1 | |
| 460001794-18 | PRESSURE TEST BUNG | 1 | |
| 460001794-2 | PRESSURE TEST BUNG | 1 | |
| 460001794-3 | PRESSURE TEST BUNG | 1 | |
| 460001794-4 | PRESSURE TEST BUNG | 1 | |
| 460001794-5 | PRESSURE TEST BUNG | 1 | |
| 460001794-6 | PRESSURE TEST BUNG | 4 | |
| 460001794-6PM | PRESSURE TEST BUNG | 1 | |
| 460001794-7 | PRESSURE TEST BUNG | 1 | |
| 460001794-8 | PRESSURE TEST BUNG | 1 | |
| 460001794-9 | PRESSURE TEST BUNG | 1 | |
| 460001794/6 | Pressure Test Bung | 4 | |
| 460004300-233 | PRESSPAD | 1 | |
| 460004330-100 | PRESS PAD | 1 | |
| 460004330-101 | PRESS PAD | 1 | |
| 460004330-102 | PRESS PAD | 1 | |
| 460004330-103 | PRESS PAD | 1 | |
| 460004330-104 | PRESS PAD | 6 | |
| 460004330-104PM | PRESS PAD | 1 | |
| 460004330-105 | PRESS PAD | 7 | |
| 460004330-106 | PRESS PAD | 1 | |
| 460004330-107 | PRESS PAD | 1 | |
| 460004330-110 | PRESS PAD | 6 | |
| 460004330-117 | PRESS PAD | 2 | |
| 460004330-118 | PRESS PAD | 2 | |
| 460004330-119 | PRESS PAD | 2 | |
| 460004330-120 | PRESS PAD | 1 | |
| 460004330-121 | PRESS PAD | 1 | |
| 460004330-122 | PRESS PAD | 6 | |
| 460004330-123 | PRESS PAD | 5 | |
| 460004330-124 | PRESS PAD | 1 | |
| 460004330-125 | PRESS PAD | 4 | |
| 460004330-126 | PRESS PAD | 1 | |
| 460004330-127 | PRESS PAD | 6 | |
| 460004330-128 | PRESS PAD | 2 | |
| 460004330-129 | PRESS PAD | 2 | |
| 460004330-130 | PRESS PAD | 6 | |
| 460004330-131 | PRESS PAD | 4 | |
| 460004330-132 | PRESS PAD | 6 | |
| 460004330-133 | PRESS PAD | 4 | |
| 460004330-134 | PRESS PAD | 6 | |
| 460004330-135 | PRESS PAD | 6 | |
| 460004330-136 | PRESS PAD | 6 | |
| 460004330-137 | PRESS PAD | 6 | |
| 460004330-138 | PRESS PAD | 6 | |
| 460004330-139 | PRESS PAD | 1 | |
| 460004330-143 | PRESS PAD | 6 | |
| 460004330-146 | PRESS PAD | 6 | |
| 460004330-147 | PRESS PAD | 6 | |
| 460004330-148 | PRESS PAD | 5 | |
| 460004330-152 | PRESS PAD | 2 | |
| 460004330-153 | PRESS PAD | 4 | |
| 460004330-154 | PRESS PAD | 4 | |
| 460004330-162 | PRESS PAD | 5 | |
| 460004330-162PM | PRESS PAD | 1 | |
| 460004330-163 | PRESS PAD | 1 | |
| 460004330-164 | PRESS PAD | 1 | |
| 460004330-165 | PRESS PAD | 1 | |
| 460004330-166 | PRESS PAD | 1 | |
| 460004330-167 | PRESS PAD | 1 | |
| 460004330-168 | PRESS PAD | 1 | |
| 460004330-169 | PRESS PAD | 4 | |
| 460004330-171 | PRESS PAD | 1 | |
| 460004330-172 | PRESS PAD | 1 | |
| 460004330-173 | PRESS PAD | 1 | |
| 460004330-174 | PRESS PAD | 1 | |
| 460004330-175 | PRESS PAD | 1 | |
| 460004330-176 | PRESS PAD | 1 | |
| 460004330-177 | PRESS PAD | 1 | |
| 460004330-178 | PRESS PAD | 1 | |
| 460004330-198 | PRESS PAD | 1 | |
| 460004330-199 | PRESS PAD | 1 | |
| 460004330-2 | PRESS PAD | 3 | |
| 460004330-200 | PRESS PAD | 1 | |
| 460004330-201 | PRESS PAD | 1 | |
| 460004330-202 | PRESSPAD | 1 | |
| 460004330-203 | PRESS PAD | 1 | |
| 460004330-204 | PRESS PAD | 1 | |
| 460004330-205 | PRESS PAD | 1 | |
| 460004330-206 | PRESS PAD | 1 | |
| 460004330-207 | PRESS PAD | 1 | |
| 460004330-209 | PRESS PAD | 1 | |
| 460004330-210 | PRESS PAD | 1 | |
| 460004330-211 | PRESS PAD | 1 | |
| 460004330-212 | PAD-PRESS | 1 | |
| 460004330-213 | PAD-PRESS | 1 | |
| 460004330-214 | PAD-PRESS | 1 | |
| 460004330-218 | PAD-PRESS | 1 | |
| 460004330-22 | PRESS PAD | 1 | |
| 460004330-220 | PRESS PAD | 1 | |
| 460004330-221 | PRESS PAD | 1 | |
| 460004330-223 | PAD-PRESS | 1 | |
| 460004330-225 | PAD-PRESS | 1 | |
| 460004330-230 | PRESS PAD | 1 | |
| 460004330-231 | PAD-PRESS | 1 | |
| 460004330-232 | PRESS PAD | 1 | |
| 460004330-233 | PRESS PAD | 1 | |
| 460004330-234 | PRESS PAD | 1 | |
| 460004330-235 | PRESS PAD | 1 | |
| 460004330-236 | PRESS PAD | 1 | |
| 460004330-237 | PRESS PAD | 1 | |
| 460004330-238 | PRESS PAD | 1 | |
| 460004330-239 | PRESS PAD | 1 | |
| 460004330-240 | PRESS PAD | 1 | |
| 460004330-241 | PRESS PAD | 1 | |
| 460004330-242 | PRESS PAD | 1 | |
| 460004330-243 | PAD-PRESS | 1 | |
| 460004330-244 | PAD-PRESS | 1 | |
| 460004330-245 | PRESS PAD | 1 | |
| 460004330-246 | PRESS PAD | 1 | |
| 460004330-248 | PRESS PAD | 1 | |
| 460004330-249 | PRESS PAD | 1 | |
| 460004330-250 | PAD-PRESS | 1 | |
| 460004330-251 | PAD-PRESS | 1 | |
| 460004330-252 | PRESS PAD | 1 | |
| 460004330-253 | PAD-PRESS | 1 | |
| 460004330-254 | PAD-PRESS | 2 | |
| 460004330-255 | PRESS PAD | 5 | |
| 460004330-256 | PRESS PAD | 4 | |
| 460004330-257 | PRESS PAD | 3 | |
| 460004330-258 | PRESS PAD | 3 | |
| 460004330-259 | PRESS PAD | 5 | |
| 460004330-26 | PRESS PAD | 1 | |
| 460004330-260 | PRESS PAD | 5 | |
| 460004330-262 | PRESS PAD | 1 | |
| 460004330-263 | PRESSPAD | 1 | |
| 460004330-264 | PRESS PAD | 1 | |
| 460004330-265 | PRESS PAD | 1 | |
| 460004330-266 | PRESS PAD | 1 | |
| 460004330-267 | PRESS PAD | 1 | |
| 460004330-268 | PRESS PAD | 1 | |
| 460004330-269 | PRESS PAD | 1 | |
| 460004330-270 | PRESS PAD | 1 | |
| 460004330-271 | PRESS PAD | 1 | |
| 460004330-272 | PRESSPAD | 1 | |
| 460004330-273 | PAD-PRESS | 1 | |
| 460004330-274 | PAD-PRESS | 1 | |
| 460004330-275 | PAD-PRESS | 1 | |
| 460004330-276 | PAD-PRESS | 1 | |
| 460004330-277 | PAD-PRESS | 1 | |
| 460004330-278 | PAD-PRESS | 1 | |
| 460004330-279 | PAD-PRESS | 1 | |
| 460004330-42 | PRESS PAD | 1 | |
| 460004330-48 | PRESS PAD | 1 | |
| 460004330-66 | PRESS PAD | 5 | |
| 460004330-68 | PRESS PAD | 1 | |
| 460004330-78 | PRESS PAD | 3 | |
| 460004330-85 | PRESS PAD | 5 | |
| 460004330-86 | PRESS PAD | 1 | |
| 460004330-87 | PRESS PAD | 1 | |
| 460004330-88 | PRESS PAD | 1 | |
| 460004330-89 | PRESS PAD | 1 | |
| 460004330-90 | PRESS PAD | 1 | |
| 460004330-91 | PRESS PAD | 4 | |
| 460004330-92 | PRESS PAD | 1 | |
| 460004330-93 | PRESS PAD | 1 | |
| 460004330-94 | PRESS PAD | 1 | |
| 460004330-95 | PRESS PAD | 1 | |
| 460004330-96 | PRESS PAD | 1 | |
| 460004330-97 | PRESS PAD | 5 | |
| 460004330-98 | PRESS PAD | 1 | |
| 460004330-99 | PRESS PAD | 1 | |
| 460004330/104 | Press Pad | 6 | |
| 460004330/105 | Press pad | 7 | |
| 460004330/110 | Press pad | 6 | |
| 460004330/117 | PRESS PAD | 2 | |
| 460004330/118 | Press Pad | 2 | |
| 460004330/119 | PRESS PAD | 2 | |
| 460004330/120 | Press Pad | 1 | |
| 460004330/122 | Press pad | 6 | |
| 460004330/123 | Press pad | 5 | |
| 460004330/125 | PRESS PAD | 4 | |
| 460004330/127 | Press pad | 6 | |
| 460004330/128 | PRESS PAD | 2 | |
| 460004330/129 | PRESS PAD | 2 | |
| 460004330/130 | Press pad | 6 | |
| 460004330/131 | PRESS PAD | 4 | |
| 460004330/132 | Press pad | 6 | |
| 460004330/133 | PRESS PAD | 4 | |
| 460004330/134 | Press pad | 6 | |
| 460004330/135 | Press pad | 6 | |
| 460004330/136 | Press pad | 6 | |
| 460004330/137 | Press pad | 6 | |
| 460004330/138 | Press pad | 6 | |
| 460004330/143 | Press pad | 6 | |
| 460004330/146 | Press pad | 6 | |
| 460004330/147 | Press pad | 6 | |
| 460004330/148 | Press pad | 5 | |
| 460004330/153 | PRESS PAD | 4 | |
| 460004330/154 | PRESS PAD | 4 | |
| 460004330/162 | Press Pad | 5 | |
| 460004330/169 | Press pad | 4 | |
| 460004330/2 | Press pad | 3 | |
| 460004330/210 | PRESS PAD | 1 | |
| 460004330/211 | PRESS PAD | 1 | |
| 460004330/254 | PRESS PAD | 2 | |
| 460004330/255 | Press pad | 5 | |
| 460004330/256 | Press pad | 4 | |
| 460004330/257 | PRESS PAD | 3 | |
| 460004330/258 | PRESS PAD | 3 | |
| 460004330/259 | Press pad | 5 | |
| 460004330/26 | PRESS PAD | 1 | |
| 460004330/260 | Press pad | 5 | |
| 460004330/42 | Press Pad | 1 | |
| 460004330/48 | Press Pad | 1 | |
| 460004330/66 | Press pad | 5 | |
| 460004330/78 | PRESS PAD | 3 | |
| 460004330/85 | PRESS PAD | 5 | |
| 460004330/91 | Press pad | 4 | |
| 460004330/94 | PRESS PAD | 1 | |
| 460004330/97 | Press pad | 5 | |
| 460004330/X | PRESS PAD | 1 | |
| 460004330/XX | PRESS PAD | 1 | |
| 460004330/XXX | PRESS PAD | 1 | |
| 460004430-198 | PRESS PAD | 1 | |
| 460004430-199 | PRESS PAD | 1 | |
| 460004430-200 | PRESS PAD | 1 | |
| 460004941-5 | Adaptor - hyd press test steering valve | 1 | |
| 460005171-104 | PRESS PAD - MLG LOCKSTAY ACTR A320NEO | 1 | |
| 460005857-2 | SPRING COMPRESSOR | 1 | |
| 460005857/2 | Spring Compressor | 1 | |
| 460005877PM | PRESS PAD | 1 | |
| 460006258-1 | PRESS PAD | 1 | |
| 460006499-1 | PRESS PAD | 1 | |
| 460006499-10 | PRESS PAD | 1 | |
| 460006499-11 | PRESS PAD | 1 | |
| 460006499-12 | PRESS PAD | 1 | |
| 460006499-13 | PRESS PAD | 1 | |
| 460006499-14 | PRESS PAD | 1 | |
| 460006499-15 | PRESS PAD | 2 | |
| 460006499-16 | PRESS PAD | 1 | |
| 460006499-17 | PRESS PAD | 1 | |
| 460006499-18 | PRESS PAD | 1 | |
| 460006499-19 | PRESS PAD | 1 | |
| 460006499-2 | PRESS PAD | 3 | |
| 460006499-20 | PRESS PAD | 1 | |
| 460006499-21 | PRESS PAD | 1 | |
| 460006499-22 | PRESS PAD | 1 | |
| 460006499-23 | PRESS PAD | 1 | |
| 460006499-24 | PRESS PAD | 1 | |
| 460006499-25 | PRESS PAD | 1 | |
| 460006499-26 | PRESS PAD | 1 | |
| 460006499-27 | PRESS PAD | 1 | |
| 460006499-3 | PRESS PAD | 3 | |
| 460006499-4 | PRESS PAD | 1 | |
| 460006499-5 | PRESS PAD | 1 | |
| 460006499-6 | PRESS PAD | 1 | |
| 460006499-7 | PRESS PAD | 1 | |
| 460006499-8 | PRESS PAD | 1 | |
| 460006499-9 | PRESS PAD | 1 | |
| 460006499/15 | PRESS PAD | 2 | |
| 460006499/2 | PRESS PAD | 3 | |
| 460006499/25 | PRESS PAD | 1 | |
| 460006499/3 | PRESS PAD | 3 | |
| 460006499/4 | PRESS PAD | 1 | |
| 460006499/5 | PRESS PAD | 1 | |
| 460006499/6 | PRESS PAD | 1 | |
| 460006499/7 | PRESS PAD | 1 | |
| 460006499/8 | PRESS PAD | 1 | |
| 460006501-1 | PAD-DOUBLE ENDED PRESS | 2 | |
| 460006501-2 | PAD-DOUBLE ENDED PRESS | 1 | |
| 460006501-3 | PAD-DOUBLE ENDED PRESS | 1 | |
| 460006501-4 | PAD-DOUBLE ENDED PRESS | 1 | |
| 460006501-5 | PAD-DOUBLE ENDED PRESS | 1 | |
| 460006501-6 | DOUBLE ENDED PRESS PAD | 1 | |
| 460006501-7 | DOUBLE ENDED PRESS PAD | 1 | |
| 460006501-8 | PRESS PAD | 1 | |
| 460006501/1 | DOUBLE ENDED PRESS PAD | 2 | |
| 460006501/2 | DOUBLE ENDED PRESS PAD | 1 | |
| 460006501/3 | DOUBLE ENDED PRESS PAD | 1 | |
| 460006501/4 | DOUBLE ENDED PRESS PAD | 1 | |
| 460006501/5 | DOUBLE ENDED PRESS PAD | 1 | |
| 460006603PM | PRESS PAD ASSEMBLY | 1 | |
| 460006947-4 | PRESS PAD | 1 | |
| 460007258 | PRESS PAD AND DRAW BOLT | 3 | |
| 461 | PRESSURE SPRAYER SOLAR TOOL | 1 | |
| 466-V-30-S | FILTER ELEMENT-HIGH PRESSURE-3 MICRON | 1 | |
| 466-V-53-S | FILTER-LOW PRESSURE-10 MICRON | 1 | |
| 4660A | HIGH PRESSURE AIR HEAD | 9 | |
| 470-24288J | COMPRESSION FIXTURE | 1 | |
| 470-24349J | COMPRESSION FIXTURE | 1 | |
| 470-27151J | GUIDE FOR HEND REAMER COMPRESSION | 1 | |
| 470-27204J | COMPRESSION FIXTURE | 1 | |
| 4728-1 | DECOMPRESSION TEST SIMULATOR | 1 | |
| 472990-WAU | PISTON RING COMPRESSOR | 1 | |
| 473-002 | HIGH PRESSURE REGULATOR | 1 | |
| 474035-WAU | DIESEL COMPRESSION TESTER | 1 | |
| 4758059-1 | TESTER ENG PRESS RAT | 1 | |
| 475MARKIII | Digital Pressure Manometer | 1 | |
| 4767461-1 | TESTER CABIN PRESS | 1 | |
| 477-3-FM | MANOMETER, 0-5 PSIG, TO MEASURE INITIAL INFLATED PRESSURE, THEN PRESSURE DECAY | 1 | |
| 477AV-3 | MANOMETER, 0-5 PSIG, TO MEASURE INITIAL INFLATED PRESSURE, THEN PRESSURE DECAY | 1 | |
| 4800-1 | HAZET 4800-1 TEST SET, COOLING SYSTEM PRESSURE | 2 | |
| 48101-7015006 | TANK PRESSURE TOOL | 1 | |
| 48101-7015006-200 | TANK PRESSURE TOOL | 1 | |
| 482-009 | PRESSURE GAGE 0-4000 PSI | 1 | |
| 482-010 | LOW PRESSURE GAGE 0-400 PSI | 1 | |
| 482-060 | MALABAR 8774B HIGH PRESSURE GAUGE | 2 | |
| 482-061 | MALABAR 8774B LOW PRESSURE GAUGE | 5 | |
| 482-062 | MALABAR 8774B HIGH PRESSURE GAUGE | 2 | |
| 482-085 | GAUGE PRESS 0-200PSI | 1 | |
| 482-086 | GAUGE PRESS 0-400PSI | 1 | |
| 4901 | PISTON RING COMPRESSOR FLEXIBLE BAND TYPE FOR 3-7/8 AND 4-1/6 BORE ENGINES | 1 | |
| 4910-00-204-3170 | GAUGE TIRE PRESSURE | 1 | |
| 4920-01-437-1455 | INSTALL KIT COMPRESSOR BLADE WIDE CORE | 1 | |
| 4920-99-617-1858 | PRESS TOOL | 1 | |
| 4920-99-929-7802 | HP COMPRESSOR DUMMY FRONT SHAFT | 1 | |
| 4923552-01-000 | HIGH PRESSURE REGULATOR | 1 | |
| 4933307-01-000 | HIGH PRESSURE REGULATOR | 1 | |
| 4933307-01-0000 | REGULATOR HIGHT PRESSURE , 0-2500 PSI. MANUFACTURE CONCOA | 1 | |
| 49HP | LOW COMPRESSOR | 1 | |
| 4AS9910001-505 | STATIC PRESSURE PORT COVERS | 1 | |
| 4CFF7 | 4000 PSI Pressure Guage | 1 | |
| 4CFG2 | Pressure Guage 0-300 | 1 | |
| 4CFH9 | PRESSURE GAUGE, 0 TO 600 PSI, 0 TO 4000 KPA RANGE, 1/4 IN NPT, ±3-2-3 GAUGE ACCURACY | 1 | |
| 4CFJ1 | PRESSURE GAUGE 2 12 | 1 | |
| 4CFJ4 | Pressure Guage 0-5000 | 1 | |
| 4CFV3 | 160 PSI Pressure Guage | 1 | |
| 4CHF9 | PRESSURE GAUGE 0 TO 600PSI 0 TO 4000KPA RANGE, 1/4 IN NPT | 1 | |
| 4CY85 | Drill Press, Bench, 10 In | 1 | |
| 4F | PRESSURE BLANK TOOL | 1 | |
| 4FFL9 | Pressure Guage | 1 | |
| 4FMR4 | Pressure Guage 3 1/2 In 600 | 1 | |
| 4FMV4 | 0-400 PSI PRESSURE GAUGE | 1 | |
| 4GB45 | AIR COMPRESSOR, GAS ENG 9 HP | 1 | |
| 4M | PRESSURE BLANK TOOL | 1 | |
| 4MB-1 65898 | ELECTRIC COMPRESSOR | 1 | |
| 4TA61 | 600 PSI Pressure Guage | 2 | |
| 4TE60B80099 | TEST SET - AUTOTHROTTLE SYSTEM TOTAL AIR TEMPERATURE/ ENGINE PRESSURE RATIO LIMIT (TAT/EPRL) | 1 | |
| 4TE65B92603 | TEST EQPT PRESS-FUEL | 1 | |
| 4V181A | PRESSURE PIPE | 1 | |
| 4ZM12 | REGULATOR, AIR COMPRESSOR AIR INLET/OUTLET SIZE: 2", AIR INLET/OUTLET TYPE: NPT (FEMALE), MAX.FLOW RATE: 2000CFM, MAX.OPERATING PRESSURE: 450 PSI, MANUFACTURE: SPEEDAIR | 1 | |
| 5 | CYCLO ORBITAL AIRCRAFT POLISHE 115-60 HZ AIR PRESS | 1 | |
| 5/3000GHOTT/AWS | TRAILER MOUNTED PRESSURE WASHER, | 1 | |
| 50 PSI | ACCU-PRESSURE HEAVY DUTY SAFETY CAP 50 PSI | 1 | |
| 50-1-3100-00 | HYDRAULIC PRESS SWIT | 7 | |
| 50-300 PSI | TRONAIR PRESSURE GAUGE (EASA) | 1 | |
| 50-389121-1 | OIL PRESSURE SWITCH | 1 | |
| 50-539121-33 | SWITCH PRESSURE OIL | 1 | |
| 500-0068 | PRESSURE TEST EQUIPMENT | 1 | |
| 500-0087 | DEPRESSURIZING VALVE PLUG | 1 | |
| 500-0087TK | Depressurizing Valve Plug | 1 | |
| 500-580 | LOW PRESSURE REGULATOR | 1 | |
| 5000 PSI | PRESSURE GAUGE (TOOL) | 1 | |
| 510 | DEPRESSED CE | 1 | |
| 5007 | High Pressure Strut Coupler | 4 | |
| 500923-00 | HIGH PRESSURE FITTING | 1 | |
| 500PSI | PRESSURE GAUGE TOOL | 1 | |
| 5011565-T | SPRING COMPRESSION TOOL | 1 | |
| 5014 | MECHANICAL PUMP PRESSURE BLEEDER | 7 | |
| 5020-01 | ADAPTER, PROOF PRESSURE TEST | 8 | |
| 5031T68G01 | PROBE, PRESSURE-TURBINE EXHAUST GAS | 1 | |
| 5051T46G01 | TUBE, B SUMP DELTA PRESSURE | 1 | |
| 5065-10 | ARBOR PRESS TOOLING AVOX SYSTEMS (SAFRAN) | 12 | |
| 50652-1 | TRANSDUCER, PRESS | 1 | |
| 507-A | High-Pressure Injection Gun (Description: High-Pressure Injection Gun) (Add to cart: Add To Cart) | 1 | |
| 508-12309 | GAGE-PRESSURE | 1 | |
| 508-13257 | GAGE-PRESSURE | 1 | |
| 508-47864 | GAGE-PRESSURE | 1 | |
| 508-47865 | GAGE-PRESSURE | 1 | |
| 508375-100 | SHAFT PRESS HOLDING | 1 | |
| 50PSI | PRESSURE GAUGE TOOL | 1 | |
| 51-G-887 | NICOPRESS TOOL | 1 | |
| 51-P-850 | NICOPRESS SLEEVE TOO | 1 | |
| 5106-06F-E17 | AIRCRAFT PRESSURE HYDRAULIC QUICK-DISCONNECTS | 2 | |
| 5106-08F-E17 | AIRCRAFT PRESSURE HYDRAULIC QUICK-DISCONNECTS | 1 | |
| 510E | DIGITAL PRESSURE GAUGE | 1 | |
| 511-LPB | PRESSURE PROBE | 1 | |
| 5120-00-H00-1131 | Spring Compressing Tool | 1 | |
| 5120-14-545-4945 | PRESS TOOL | 1 | |
| 513-32-12-052 | COMPRESSION TOOL (NLG SPRING) | 1 | |
| 513-32-12-052B | tool compression | 1 | |
| 513.32.12.052 | COMPRESSION TOOL | 1 | |
| 513.71.12.001 | COMPRESSOR WASHER | 1 | |
| 5137 | SWITCH-PRESS DIFFERENTIAL | 1 | |
| 514-6806-6011 | GAUGE TIRE PRESS | 1 | |
| 51774- T1 | PRESSING TOOL | 1 | |
| 51774-T1 | Pressing Tool | 1 | |
| 51774T1 | PRESSING TOOL (IN) | 1 | |
| 51774T1PM | PRESSING TOOL (IN) | 1 | |
| 51954T1 | Pressing tool | 1 | |
| 5204-21B2 | VACCUUM PRESSURE GAUGE | 1 | |
| 522-1836-001 | SUPPRESSOR LOAD BOX | 1 | |
| 5229A1 | DRILL-PRESS VISE | 1 | |
| 5231 | HYDRAULIC POWER UNIT TRONAIR MODEL 5231, PRESSURE MAX 3000 PSI - 207 BAR GAUGE MAX 5000 PSI - 345 BAR, 380V-220V/ 50 HZ. | 1 | |
| 523199-3 | HYDR.FOOT PUMP WITHOUT PRESSURE TUBE AND CRIMPING HEAD | 6 | |
| 526640361 (CALIB) | TIRE PRESSURE TESTER 0-18 BAR /0-260 PSI | 1 | |
| 526640361 CAL | TIRE PRESSURE TESTER 0-18 BAR /0-260 PSI | 1 | |
| 5303/S2 CLASS | PRESS. GAGE TEST UNIT-OIL OPERATED PISTON GAGE | 1 | |
| 53UH07- 3 | 53UH07- 3 TO 4 MOTOR HP FLOOR DRILL PRESS, GEARED HEAD DRIVE TYPE,30 IN SWING, 240 VOLTAGE | 1 | |
| 54-2062Z26 | REGULATOR, PRESSURE, HYDRAULIC TYPE, 50- 6000 PSIG, 316SS BODY, E.P. SEALS, 3/8" NPT | 1 | |
| 54-2069Z26-181 | REGULATOR, PRESSURE, HYDRAULIC TYPE, 3000 PSI INLET, 0-300 PSI OUTLET, 316SS BODY | 1 | |
| 540681-1 | BAR LOCK (PRESSURE RELIEF VALVE) CLAMP | 2 | |
| 55-90134 | GAUGE DE COMPRESSEUR | 1 | |
| 550T05648-401 | Adapter,Assy-Pressure Test,Engine Shroud | 1 | |
| 550T05648-401 | ADAPTER,ASSY-PRESSURE TEST,ENGINE SHROUD | 1 | |
| 550T05652-401 | ADAPTER-PRESSURIZA-TION TEST,CABIN | 1 | |
| 550T05652-401 | ADAPTER-PRESSURIZATION TEST,CABIN | 1 | |
| 550T05654-401 | Adapter,Assy-Pressure Test,APU Shroud | 1 | |
| 550T05654-401 | ADAPTER,ASSY-PRESSURE TEST,APU SHROUD | 1 | |
| 550T09071-001 | ADAPTER FITTING -PRESSURIZATION TEST | 1 | |
| 5522A | MULTI-PRODUCT CALIBRATOR FOR PRESSURE, TEMPERATURE, AND ELECTRICAL MEASUREMENTS, IDEAL FOR CALIBRATION LABS. | 1 | |
| 55535S0003 | PRESSING TOOL | 1 | |
| 55575S0000 | COMPRESSION TOOL | 1 | |
| 55590S0000 | PRESS IN FIXTURE | 1 | |
| 55595S0001 | PRESS IN TOOL | 1 | |
| 556 | XZT AIRCRAFT AVIATION TOOLS SCHRADER,HIGH PRESSURE STRUCT NO AIR LOSS COUPLER 556,COUPLINGS TO FILL | 3 | |
| 556-1-15847-001 | HOSE - FOR PRESSURE INDICATION | 1 | |
| 55606S0000 | PRESSING DEVICE | 1 | |
| 55610S0000 | PRESS IN FIXTURE | 1 | |
| 55630S0000 | PRESS IN MANDREL | 1 | |
| 55638S0000 | EXTRACTOR - PRESSURE OFF BRAKE | 1 | |
| 55680S0000 | PRESS-IN TOOL | 1 | |
| 55681S0000 | PRESS IN TOOL | 1 | |
| 55682S0000 | PRESSING TOOL | 1 | |
| 55683S0000 | PRESSING TOOL | 1 | |
| 55787S0001 | PRESS IN TOOL | 1 | |
| 55788S0001 | PRESS OUT MANDREL | 1 | |
| 558-1-01530 | COMPRESSION TOOL | 1 | |
| 558-1-05791 | PRESSURE TEST FIXTURE | 1 | |
| 558-1-05832 | PRESSURE TEST FIXTURE | 1 | |
| 558-1-05852 | CANISTER PRESSURIZING RIG | 1 | |
| 558-1-05995 | BLANKS PRESSURE TEST | 1 | |
| 558-1-101530 | COMPRESSOR TOOL | 1 | |
| 558-1-13467-000 | PRESSURE TEST FIXTURE | 1 | |
| 558-1-13469-000 | FIXTURE OUTLET VALVE PRESSURE TEST | 1 | |
| 558-2-03160 | PRESS TOOL | 1 | |
| 558-2-03190 | PRESS ADAPTER | 1 | |
| 558-2-03192 | PRESS ADAPTER | 1 | |
| 558-2-05987 | PLUG CANISTER PRESSURE SWITCH CONNECTION | 1 | |
| 558-2-3160 | PRESS TOOL | 1 | |
| 55806S0001 | PRESSING TOOL | 1 | |
| 55867S0000 | PRESS SOCKET | 1 | |
| 55867S0001 | PRESS SOCKET | 1 | |
| 55D6053 | TRAILER COMPRESSED G | 1 | |
| 56065S0000 | PRESSING TOOL | 1 | |
| 56075S0000 | PRESS IN PRESS OUT TOOL | 1 | |
| 56086S0000 | PRESS IN PRESS OUT FLANGE TOOL | 1 | |
| 56087S0000 | PRESS IN PRESS OUT FLANGE TOOL | 1 | |
| 56088S0000 | PRESS IN PRESS OUT TOOL | 1 | |
| 56091S0000 | PRESS IN PRESS OUT TOOL | 1 | |
| 56268S0002 | LEE PRESS IN MANDREL | 1 | |
| 56486S0000 | PRESS IN TOOL | 1 | |
| 56487S0000 | PRESS IN TOOL | 1 | |
| 56511S0001 | PRESSING PIECE | 1 | |
| 56512-T1 | Pressing Tool | 1 | |
| 56512-T3 | PRESSING TOOL | 1 | |
| 56512T1 | PRESSING TOOL | 1 | |
| 56546S0000 | PRESS IN TOOL | 1 | |
| 56562-0004 | PRESS IN MANDREL | 1 | |
| 56562-0005 | PRESS IN MANDREL | 1 | |
| 56562-0006 | PRESS IN MANDREL | 1 | |
| 56562-0007 | PRESS IN MANDREL | 1 | |
| 56562-0009 | PRESS IN MANDREL | 1 | |
| 56562-0010 | PRESS IN MANDREL | 1 | |
| 56562-0012 | PRESS OUT MANDREL | 1 | |
| 56562-0014 | PRESS OUT MANDREL | 1 | |
| 56562-0015 | PRESS OUT MANDREL | 1 | |
| 56562-0016 | PRESS OUT MANDREL | 1 | |
| 56562-0020 | PRESS OUT MANDREL | 1 | |
| 56562-0100 | PRESS OUT MANDREL | 1 | |
| 56562A0000 | PRESS IN PRESS OUT FIXTURE | 1 | |
| 56562A0000-01 | PRESS IN OUT FIXTURE | 1 | |
| 56565S0000 | PRESS IN FIXTURE | 1 | |
| 56572T3 | PRESSING FIXTURE | 1 | |
| 56572T4 | PRESSING FIXTURE | 1 | |
| 56579S0000 | Spring Compression Tool | 2 | |
| 56593S0000 | PRESS IN FIXTURE | 1 | |
| 56604S0001 | PRESS OUT MANDREL (TO REMOVE SEAL) | 1 | |
| 56604S0002 | PRESS IN MANDREL (TO INSTALL SEAL) | 1 | |
| 56616S0000 | PRESS OUT TOOL | 1 | |
| 56629T1 | PRESSING TOOL | 1 | |
| 56674S0002 | PRESSING PIN | 1 | |
| 56694-T2 | PRESSING TOOL | 1 | |
| 56699T2 | FIXTURE PRESSING | 1 | |
| 56733S0000 | PRESS IN OUT TOOL | 1 | |
| 56901A0000-01 | PRESS OUT FIXTURE | 1 | |
| 56967A0000-01 | PRESS IN FIXTURE | 1 | |
| 56968A0000-01 | PRESS IN FIXTURE | 1 | |
| 56971A0000-01 | PRESS IN MANDREL | 1 | |
| 56975A0000-01 | PRESS IN MANDREL | 1 | |
| 56981A0000-01 | PRESS IN MANDREL | 1 | |
| 56985A0000-01 | PRESS IN MANDREL | 1 | |
| 56995A0000 | HYDRAULIC PRESSURE TEST FIXTURE | 1 | |
| 56995A0000-01 | HYDRAULIC PRESSURE TEST FIXTURE | 1 | |
| 56H5301-01-580 | PRESSURE REGULATOR | 1 | |
| 57007A0000-01 | PRESS-IN MANDREL | 1 | |
| 57008A0000-01 | PRESS-IN MANDREL | 1 | |
| 57009A0000-01 | PRESS-IN MANDREL | 1 | |
| 57013A0000-01 | PRESS-IN FIXTURE | 1 | |
| 57093A0000-01 | PRESS-IN FIXTURE | 1 | |
| 571-523199-3 | HYDR.FOOT PUMP WITHOUT PRESSURE TUBE AND CRIMPING HEAD | 1 | |
| 57196A0000-01 | PRESS OUT MANDREL | 1 | |
| 5720 | CMD EXTREME PRESSURE LUBRICANT MANLEY | 6 | |
| 5720K-200 | CMD EXTREME PRESSURE LUBRICANT MANLEY | 1 | |
| 572757-1 | SWITCH: PRESSURE,THERMOSTATIC, | 7 | |
| 5737-00-3 | PRESSURE SENSOR SWITCH | 1 | |
| 57449A0000-01 | PRESS OUT TOOL | 1 | |
| 57455A0000-01 | PRESS IN FIXTURE | 1 | |
| 57589A0000-01 | PRESS IN TOOL | 1 | |
| 57589A0000-01 PM | PRESS IN TOOL | 1 | |
| 57589A0000-01PM | PRESS IN TOOL | 1 | |
| 5784 | 057840099 HIGH PRESSURE CONNECTOR (COUPLER 7/16"-20 .305-32) | 1 | |
| 57864A0000-01 | PRESS IN FIXTURE | 1 | |
| 57921-T1 | PRESSING TOOL | 1 | |
| 57994A0000-01 | PRESS OUT TOOL | 1 | |
| 57994A0000-01 PM | PRESS OUT TOOL | 1 | |
| 57994A0000-01PM | PRESS OUT TOOL | 1 | |
| 57996T2 | PRESSING FIXTURE | 1 | |
| 580-3 | COMPRESSOR, REFRIGERATION | 6 | |
| 58096A0000-01 | PRESS OUT TOOL | 1 | |
| 58133-0006 | PRESS IN MANDREL | 1 | |
| 582-250 | PLACARD: PRESS TO TEST | 1 | |
| 58330-0004 | Press-in Fixture | 1 | |
| 58330-0005 | Press-in Fixture | 1 | |
| 58420A0000-01 | PRESS IN FIXTURE | 1 | |
| 58569-0009 | PRESS OUT MANDREL | 1 | |
| 58569A0000-01 | PRESS FIXTURE | 1 | |
| 58599A0000-01 | PRESS-OUT FIXTURE | 1 | |
| 58613-T4 | Pressing Fixture (out) | 1 | |
| 58613-T5 | Pressing Fixture (in) | 1 | |
| 58613T4 | PRESSING FIXTURE | 1 | |
| 58613T5 | PRESSING TOOL | 1 | |
| 58749-T600 | Pressing Fixture | 1 | |
| 58749T600 | PRESSING FIXTURE | 1 | |
| 58797A0000-01 | Press-in Fixture | 1 | |
| 58826-0006 | PRESS IN MANDREL | 1 | |
| 59000122-1 | TEST FITTING, PRESSURE SWITCH | 1 | |
| 59102-0006 | PRESS IN MANDREL | 1 | |
| 593-06 | ASHCROFF PRESSURE GAUGE 400 KPA 60 PSI | 1 | |
| 59548A0000-01 | PRESS-IN FIXTURE | 1 | |
| 5955613 REV A | KEEPER - MLG PRESSURE TEST | 1 | |
| 5955613-505 | KEEPER - MLG PRESSUR | 1 | |
| 59556I3 | KEEPER - MLG PRESSURE TEST | 1 | |
| 59606A0000-01 | PRESS IN MANDREL | 1 | |
| 59607A0000-01 | PRESS IN MANDREL | 1 | |
| 59636T1 | Pressing Tool | 1 | |
| 5F | PRESSURE BLANK TOOL | 1 | |
| 5KZ42 | LOW PRESSURE REGULATOR | 1 | |
| 5M | PRESSURE BLANK TOOL | 1 | |
| 5MC-1A | HIGH PRESSURE COMPRESSOR - TRAILER MOUNTED, DIESEL, AIR VOLUME=15CFM, AIR PRESSURE=0-3500PSI | 1 | |
| 5T3-8656 | PRESSURE PLUG WRENCH | 1 | |
| 60 PSI | PRESSURE GAUGE (TOOL) | 1 | |
| 60-1082PS02L5000XC4 | PRESSURE GAUGE 1082 | 1 | |
| 60-1125-SW-02L-200PSI | DIFFERENTIAL PRESSURE GAGE | 1 | |
| 60-3200-0010 | TUBE - MANIFOLD PRESSURE RH | 3 | |
| 6000-100 | Digital Pressure Meter / Pitot Static Reader | 1 | |
| 6000-KTQ | GROUND PRESSURE GENERATORS- APICS | 1 | |
| 6000KTO | APICS GND PRESSURE GEN | 1 | |
| 6000PSI GAUGE | PRESSURE GAUGE | 1 | |
| 6001-0008- 1 | AIR COMPRESSOR | 1 | |
| 6001379-001 | ARBOR PRESS 1 TON | 1 | |
| 60096A010002 | TRIMAIR PRESS REGULATING VALVE | 1 | |
| 60096A010002 A | TRIMAIR PRESS REGULATING VALVE | 1 | |
| 600PSI | PRESSURE GAUGE TOOL | 1 | |
| 601C2519-001 | BRACKET - SEAL DEPRESSOR | 1 | |
| 601C2519-002 | BRACKET - SEAL DEPRESSOR | 1 | |
| 6057-3 | FUEL PRESSURE SWITCH | 1 | |
| 607 | STRUT SERVICING EQUIPMENT (HIGH PRESSURE) | 1 | |
| 6096 | PRESSURE GAUGE | 1 | |
| 6099 | PRESSURE GAUGE | 1 | |
| 60G9127001A001 | WRENCH ASSY PRESSURE RELIEF ACT MANIFOLD WING CS | 1 | |
| 60G9127001M001 | PRESSURE RELIEF WRENCH HYDRAULIC COMPONENTS | 1 | |
| 61-7448-1 | PRESSURE SW | 1 | |
| 61-74489-1 | WIRE KIT, ADD REDUNDANT PRESSURE SWITCH | 1 | |
| 61-74489-2 | WIRE KIT - ADD REDUNDANT PRESS. SWITCH – EXISTING D1172 CONN –W034, W044, W246 | 1 | |
| 6111 | Fuel Pressure Ind | 4 | |
| 6116 (K-3706) | COUPLING HIGH PRESS. NITROGEN | 1 | |
| 6121A-E.100 | GAUGE ASSEMBLY- MANIFOLD PRESSURE | 1 | |
| 612A050-A | HIGH PRESSURE NITROGEN FILLING TOOL | 1 | |
| 61393-T200 | PRESSING FIXTURE | 1 | |
| 616600AT3 | SPRING COMPRESSION TOOL | 1 | |
| 6199ES702-181 | TOOL FOR LOW PRESSURE LEAK TEST | 1 | |
| 61A-1A-0015Y | PRESSURE GAUGE | 1 | |
| 61A1B0100 | Absolute pressure gauge | 1 | |
| 620-864-769-0 | CRIMPING DIE FOR HARNESS COMPRESSION | 1 | |
| 620-864-912-0 | CRIMPING DIE FOR HARNESS COMPRESSION | 1 | |
| 6200 | MANIFOLD PRESSURE GAUGE | 5 | |
| 6200KTQ | GROUND PRESSURE GENERATORS- APICS | 1 | |
| 62100-2200 | Manual Press with IDT Ribbon Cable Tool Kit | 1 | |
| 62100-2501 | Lower Alignment Tool for 1.27mm Pitch Receptacle, Press-Fit Assembly, 40 Circuits | 1 | |
| 62100-2502 | Upper Alignment Tool for 1.27mm Pitch Receptacle, Press-Fit Assembly, 40 Circuits | 1 | |
| 62100-2601 | Lower Alignment Tool for 1.27mm Pitch Receptacle, Press-Fit Assembly, 80 Circuits | 1 | |
| 62100-2602 | Upper Alignment Tool for 1.27mm Pitch Receptacle, Press-Fit Assembly, 80 Circuits | 1 | |
| 62100-9630 | Impel™ Backplane Press-In Tool | 1 | |
| 62100-9640 | Impel™ Press-In Tool | 1 | |
| 62200-4400 | EVC MicroCross Ferrule Crimp Tool Kit for the 11-31-6356 Molex Arbor Press | 1 | |
| 62200-4443 | IDT - Manual Press | 1 | |
| 62200-4500 | Manual Arbor Press, VHDCI | 1 | |
| 62200-4600 | IDT - Manual Press | 1 | |
| 62200-5500 | IDT - Manual Press | 1 | |
| 62200-6702 | IDT - Manual Press | 1 | |
| 62200-7400 | Tool Kit for Standard Manual Press FFC | 1 | |
| 62200-7800 | Standard Manual Press for FFC | 1 | |
| 62200-8900 | Manual Press for Micro-D Backshell Crimp Tool Kit, 9 Circuits | 1 | |
| 62201-6250 | Press Block Removal Tool | 1 | |
| 62201-6600 | Ribbon Cable Tool Kit, Press Not Included | 1 | |
| 62201-7300 | Press-In Tool for High Speed Edge Card | 1 | |
| 62201-7400 | Manual Arbor Press, RAST 2.5 | 1 | |
| 62201-7500 | Manual Arbor Press, RAST 5.0 | 1 | |
| 62201-8000 | DVI MicroCross Ferule Crimp Tool Kit for the 11-31-6356 Molex Arbor Press | 1 | |
| 62201-8413 | Omnigrid Daughter Card Press In Block | 1 | |
| 62201-8601 | Press-In Tool Vertical Header 11-Row, 5-Column | 1 | |
| 62201-8602 | Press-In Tool for Vertical Header 11-Row, 6-Column | 1 | |
| 62201-8603 | Press-In Tool for Vertical Header 11-Row, 10-Column | 1 | |
| 62201-8604 | Press-In Tool for Right Angle Receptacle and Header 11-Row, 5-Column | 1 | |
| 62201-8605 | Press-In Tool for Right Angle Receptacle and Header 11-Row, 6-Column | 1 | |
| 62201-8606 | Press-In Tool for Right Angle Receptacle and Header 11-Row, 10-Column | 1 | |
| 62201-8607 | Press-In Tool for Vertical Header 7-Row, 4-Column | 1 | |
| 62201-8608 | Press-In Tool for Vertical Header 7-Row, 6-Column | 1 | |
| 62201-8609 | Press-In Tool for Vertical Header 7-Row, 10-Column | 1 | |
| 62201-8610 | Press-In Tool for Right Angle Receptacle and Header 7-Row, 4-Column | 1 | |
| 62201-8611 | Press-In Tool for Right Angle Receptacle and Header 7-Row, 6-Column | 1 | |
| 62201-8612 | Press-In Tool for Right Angle Receptacle and Header 7-Row, 10-Column | 1 | |
| 62201-8617 | Press-In Tool for Vertical Header 11-Row, 8-Column | 1 | |
| 62201-8618 | Press-In Tool for Right Angle Receptacle and Header 11-Row, 8-Column | 1 | |
| 62201-8619 | Press-In Tool for Vertical Header 15-Row, 8-Column | 1 | |
| 62201-8620 | Press-In Tool for Vertical Header 15-Row, 9-Column | 1 | |
| 62201-8621 | Press-In Tool for Vertical Header 15-Row, 10-Column | 1 | |
| 62201-8622 | Daughter Card Press-In Tool | 1 | |
| 62201-8623 | Press-In Tool for Right Angle Receptacle 15-Row, 9-Column | 1 | |
| 62201-8624 | Press-In Tool for Right Angle Receptacle 15-Row, 10-Column | 1 | |
| 62201-8625 | Press-In Tool for Vertical Header 5-Row, 6-Column | 1 | |
| 62201-8626 | MICRO TCA Press-In Tool | 1 | |
| 62201-8627 | Press-in Tool for Right Angle Power Receptacle and Header for 7-Row | 1 | |
| 62201-8628 | Press-in Tool for Right Angle Power Receptacle and Header for 11-Row | 1 | |
| 62201-8629 | Press-in Tool for Right Angle Power Header for 15-Row | 1 | |
| 62201-8630 | Press-in Tool for Vertical Power Receptacle for 7-Row | 1 | |
| 62201-8631 | Press-in Tool for Vertical Power Receptacle for 11-Row | 1 | |
| 62201-8632 | Press-in Tool for Vertical Power Receptacle for 15-Row | 1 | |
| 62201-8639 | Press-In Tool for 6-Pair by 14-Column Backplane | 1 | |
| 62201-8640 | Backplane Module Installation Press-In Tool | 1 | |
| 62201-8641 | Daughter Card Module Installation Press-In Tool | 1 | |
| 62201-8642 | Right Angle Power Module Installation Press-In Tool | 1 | |
| 62201-8643 | Vertical Power Module Installation Press-In Tool | 1 | |
| 62201-8644 | Backplane Module Installation Press-In Tool | 1 | |
| 62201-8645 | Daughter Card Module Installation Press-In Tool | 1 | |
| 62201-8646 | Daughter Card Module Installation Press-In Tool for 3-Pair by 10-Column Assemblies | 1 | |
| 62201-8647 | Backplane Module Installation, Press-In Tool | 1 | |
| 62201-8648 | Vertical Power Module Installation, Press-In Tool | 1 | |
| 62201-8649 | Right Angle Power Module Installation, Press-In Tool | 1 | |
| 62201-8650 | Daughter Card Module Installation Press-In Tool for 3-Pair by 16-Column Assemblies | 1 | |
| 62201-8651 | Backplane Module Installation, Press-In Tool | 1 | |
| 62201-8654 | Press-In Tool for 80A Right Angle Plug | 1 | |
| 62201-8655 | Press-In Tool for 150A Right Angle Plug | 1 | |
| 62201-8657 | Press-In Tool for Daughter Card Module | 1 | |
| 62201-8658 | Press-In Tool for Backplane Module | 1 | |
| 62201-8659 | Daughter Card Module Installation Press-In Tool for 5-Pair by 16-Column Assemblies | 1 | |
| 62201-8661 | Daughter Card Signal Module Assembly Press-In Tool for 6-Pair by 10-Column Assemblies | 1 | |
| 62201-8662 | Backplane Signal Module Assembly Press-In Tool for 6-Pair by 10-Column Assemblies | 1 | |
| 62201-8663 | Daughter Card Signal Module Assembly Press-In Tool for 6-Pair by 16-Column Assemblies | 1 | |
| 62201-8664 | Press-in-Tool for Daughter Card Signal Module, 6-Pair by 16-Column Assemblies | 1 | |
| 62201-8666 | Press-In Tool for Power Module Assembly | 1 | |
| 62201-8667 | Press-In Tool for 5-Pair Assemblies | 1 | |
| 62201-8668 | Press-In Tool for Power Module Assembly | 1 | |
| 62201-8669 | Press-In Tool for Power Module Assembly, 6-Pair Assemblies | 1 | |
| 62201-8670 | Press In Tool for Vertical Receptacle | 1 | |
| 62201-8671 | Vertical Receptacle Press-In Tool | 1 | |
| 62201-8672 | Vertical Receptacle Press-In Tool | 1 | |
| 62201-8673 | Plug and Receptacle Housing Press-In Tool for Plug and Receptacle | 1 | |
| 62201-8674 | Impact™ Backplane Press-In Tool, 3-Pair by 8-Column Assemblies | 1 | |
| 62201-8675 | Daughter Card Module Installation Press-In Tool for 3-Pair by 8-Column Assemblies | 1 | |
| 62201-8676 | Press-In Tool for Backplane Module | 1 | |
| 62201-8677 | Press-In Tool for Daughter Card Module | 1 | |
| 62201-8678 | Backplane Press-In Tool | 1 | |
| 62201-8679 | Backplane Press-In Tool for 4-Pair by 6-Column Assemblies | 1 | |
| 62201-8682 | Enhanced Daughter Card Press-In Tool | 1 | |
| 62201-8689 | Press-In Tool for 6-Pair Vertical Power Header | 1 | |
| 62201-8692 | Backplane Module Installation Press-In Tool for 2-Pair by 10-Column Assemblies | 1 | |
| 62201-8698 | Press-In Tool for 6-Pair by 14-Column Backplane | 1 | |
| 62201-8706 | Tinman Dual Vertical Header Press-In Tool for 5-Pair by 8 Column Assemblies | 1 | |
| 62201-8707 | Tinman Dual Vertical Header Press-In Tool for 5-Pair by 10 Column Assemblies | 1 | |
| 62201-8714 | Press-In Tool for Impact™ Power Header | 1 | |
| 62201-8717 | Press-In Tool for Power Module Assembly | 1 | |
| 62201-8718 | Press-In Tool for Power Module Assembly | 1 | |
| 62201-8722 | Tinman Dual Vertical Header Press-In Tool for 5-Pair by 8 Column Assemblies | 1 | |
| 62201-8727 | Backplane Module Installation Press-In Tool | 1 | |
| 62201-8734 | Press-In Tool for 46 Circuit Assemblies | 1 | |
| 62201-8735 | Press-In Tool for Daughter Card 5-Pair by 12-Column Assemblies | 1 | |
| 62201-8736 | Press-In Tool for 12.5 Gbps Edge Card Connector | 1 | |
| 62201-8744 | Press-In Tool for Daughter Card | 1 | |
| 62201-8746 | Press-In Tool for Daughter Card | 1 | |
| 62201-8754 | Press-In Tool for Daughter Card 5-Pair by 8-Column Assemblies | 1 | |
| 62201-8762 | Press in Tool for Daughter Card 6-Pair by 12-Column Assemblies | 1 | |
| 62201-8778 | Press-in-Tool for Daughter Card Signal Module, 2-Pair by 10-Column Assemblies | 1 | |
| 62201-8779 | Press-in-Tool for Daughter Card Signal Module, 2-Pair by 16-Column Assemblies | 1 | |
| 62201-8781 | Backplane Press-In Tool | 1 | |
| 62201-8783 | Backplane Module Installation Press-In Tool | 1 | |
| 62201-8787 | Backplane Press-In Tool | 1 | |
| 62201-8790 | Backplane Press-In Tool | 1 | |
| 62201-8793 | Impact™ Backplane Press-In Tool | 1 | |
| 62201-8794 | Impact™ Backplane Module Installation Press-In Tool | 1 | |
| 62201-8795 | Impact™ Backplane Module Installation Press-In Tool | 1 | |
| 62201-8801 | Impact™ 85 Ohm Backplane Press-In Tool for 3-Pair by 8-Column Assemblies | 1 | |
| 62201-8804 | Impact™ 85 Ohm Backplane Press-In Tool for 5-Pair by 12-Column Assemblies | 1 | |
| 62201-8807 | Impact™ 85 Ohm Backplane Press-In Tool for 6-Pair by 10-Column Assemblies | 1 | |
| 62201-8810 | Impact™ 85 Ohm Backplane Press-In Tool for 6-Pair by 16-Column Assemblies | 1 | |
| 62201-8813 | Impact™ 85 Ohm Backplane Press-In Tool | 1 | |
| 62201-8816 | Backplane Press-In Tool | 1 | |
| 62201-8821 | Impact™ 85 Ohm Backplane Press-In Tool | 1 | |
| 62201-8824 | Impact™ 85 Ohm Backplane Press-In Tool | 1 | |
| 62201-8826 | Impact™ Backplane Press-In Tool | 1 | |
| 62201-8833 | Impact™ Backplane Module Installation Press-In Tool | 1 | |
| 62201-8836 | Impact™ Backplane Press-In Tool | 1 | |
| 62201-8839 | Impact™ Daughtercard Module Installation Press-In Tool | 1 | |
| 62201-8840 | Impact™ Daughtercard Press-In Tool | 1 | |
| 62201-8844 | Impact™ 85 Ohm Backplane Press-In Tool | 1 | |
| 62201-8853 | Impact™ Backplane Press-In Tool | 1 | |
| 62201-8856 | Press-In Tool for Impact™ Signal Module Assembly | 1 | |
| 62201-8857 | Press-In Tool for Impact™ Signal Module Assembly | 1 | |
| 62201-8859 | Press-In Tool for Impact™ Signal Module Assembly | 1 | |
| 62201-8860 | Impact™ Vertical Mezzanine Signal Module Installation Press-In Tool | 1 | |
| 62201-8868 | Impact™ Daughter Card Press-In Tool | 1 | |
| 62201-8869 | Impact™ Backplane Press-In Tool | 1 | |
| 62201-8872 | Impact™ Backplane Press-In Tool | 1 | |
| 62201-8873 | Impact™ Backplane Press-In Tool | 1 | |
| 62201-8874 | Impact™ Backplane Press-In Tool | 1 | |
| 62201-8875 | Impact™ Backplane Press-In Tool | 1 | |
| 62201-8879 | Impact™ Backplane Press-In Tool for Impact™ 85 Ohm Vertical Backplane Assembly | 1 | |
| 62201-8882 | Impact™ 85 Ohm Backplane Press-In Tool | 1 | |
| 62201-8903 | Impel™ Daughter Card Press-In Tool | 1 | |
| 62201-8915 | Impel™ Daughter Card Press-In Tool | 1 | |
| 62201-8919 | Impel™ Daughter Card Press-In Tool | 1 | |
| 62201-8920 | Impel™ Press-In Tool | 1 | |
| 62201-8923 | Impel™ Daughter Card Press-In Tool | 1 | |
| 62201-8924 | Impel™ Backplane Press-In Tool | 1 | |
| 62201-8933 | Impel™ Backplane Press-In Tool | 1 | |
| 62201-8936 | IMPEL™ Backplane Press-In Tool | 1 | |
| 62201-8943 | IMPEL Backplane Press-In Tool | 1 | |
| 62201-8946 | IMPEL™ Backplane Press-In Tool | 1 | |
| 62201-8949 | IMPEL Backplane Press-In Tool | 1 | |
| 62201-8955 | Impel™ Backplane Press-In Tool | 1 | |
| 62201-8959 | Impel™ Daughtercard Module Installation Press-In Tool | 1 | |
| 62201-8960 | Impel Daughtercard Press-In Tool | 1 | |
| 62201-8961 | Impel™ Daughtercard Module Installation Press-In Tool | 1 | |
| 62201-8962 | Impel™ Daughtercard Press-In Tool | 1 | |
| 62201-8964 | Impel Daughtercard Press-In Tool | 1 | |
| 62201-8965 | IMPEL Backplane Module Installation Press-In Tool | 1 | |
| 62201-8966 | Impel Daughtercard Press-In Tool | 1 | |
| 62201-8969 | Impel™ Daughtercard Module Installation Press-In Tool | 1 | |
| 62201-8972 | Impel™ Daughtercard Module Installation Press-In Tool | 1 | |
| 62201-8975 | Impel™ Daughtercard Module Installation Press-In Tool | 1 | |
| 62201-8976 | Impel™ Daughtercard Module Installation Press-In Tool | 1 | |
| 62201-8978 | Impact™ Backplane Press-In Tool | 1 | |
| 62201-8979 | Impact™ RAM Press-In Tool | 1 | |
| 62201-8980 | Impel™ Daughtercard Module Installation Press-In Tool | 1 | |
| 62201-8981 | Impel™ Backplane Press-In Tool | 1 | |
| 62201-8988 | Impel™ Backplane Assembly Press-In Tool | 1 | |
| 62201-8991 | Impel™ Daughtercard Press-In Tool | 1 | |
| 62201-8995 | Impel™ Daughtercard Press-In Tool | 1 | |
| 62201-9800 | Manual Press for Micro-D Backshell Crimp Tool Kit, 15 Circuits | 1 | |
| 62201T200 | HOLDING PRESSING | 2 | |
| 62202-0000 | Manual Press for Micro-D Backshell Crimp Tool Kit, 25 Circuits | 1 | |
| 62202-0235 | Modular Press In Tool | 1 | |
| 62202-0236 | Modular Press In Tool | 1 | |
| 62202-0237 | Modular Press In Tool | 1 | |
| 62202-0238 | Modular Press In Tool | 1 | |
| 62202-0239 | Modular Press In Tool | 1 | |
| 62202-0243 | Modular Press In Tool | 1 | |
| 62202-1801 | Modular Press-In Tool | 1 | |
| 62202-1802 | Modular Press-In Tool | 1 | |
| 62202-1803 | Modular Press-In Tool | 1 | |
| 62202-1804 | Modular Press-In Tool | 1 | |
| 62202-1805 | Modular Press-In Tool | 1 | |
| 62202-1806 | Modular Press-In Tool | 1 | |
| 62202-1807 | Modular Press-In Tool | 1 | |
| 62202-1808 | Modular Press-In Tool | 1 | |
| 62202-1809 | Modular Press-In Tool | 1 | |
| 62202-1910 | Modular Press In Tool, 4 Circuits | 1 | |
| 62202-1920 | Modular Press In Tool, 6 Circuits | 1 | |
| 62202-1930 | Modular Press In Tool, 10 Circuits | 1 | |
| 62202-1940 | Modular Press In Tool, 20 Circuits | 1 | |
| 62202-1950 | Modular Press In Tool, 40 Circuits | 1 | |
| 62202-1960 | Modular Press In Tool, 80 Circuits | 1 | |
| 62202-2026 | GbX-L™ Backplane Press-In Tool | 1 | |
| 62202-2801 | Press In Tool | 1 | |
| 62202-3025 | Press-In Tool for Backplane | 1 | |
| 62202-3026 | Backplane Press-In Tool | 1 | |
| 62202-3030 | Press in Tool for Backplane | 1 | |
| 62202-3031 | Backplane Press-In Tool | 1 | |
| 62202-4420 | 10 Gigabit Ethernet 2 by 6 Magnetic Jack Assemblies with Press-fit Tails. | 1 | |
| 62202-4430 | 10 Gigabit Ethernet 2 by 3 Magnetic Jack Assemblies with Press-fit Tails. | 1 | |
| 62203-0026 | Impact™ Daughter Card Press-In Tool | 1 | |
| 62203-0027 | Impact™ Orthogonal Direct Ram Module Installation Press-In Tool 4-Pair by 8 Column | 1 | |
| 62203-0028 | Impact™ Orthogonal Direct Ram Module Installation Press-In Tool 5-Pair by 10 Column | 1 | |
| 62203-0029 | Impact™ Orthogonal Direct Ram Module Installation Press-In Tool | 1 | |
| 62203-0031 | CXP Press-In Tool | 1 | |
| 62203-0032 | CXP Press-In Tool | 1 | |
| 62203-0050 | Press-In Tool | 1 | |
| 62203-0070 | Press-In Tool for XFP Cage Assembly | 1 | |
| 62203-0110 | Press-In Tool | 1 | |
| 62203-0120 | Press-In Tool Vertical CXP HSC Connector Assembly | 1 | |
| 62203-0200 | Press-In Tool | 1 | |
| 62203-0300 | Press-In Tool | 1 | |
| 62203-0400 | Press-In Tool | 1 | |
| 62203-0420 | iPass+™ HSC Stack Dual-Port Press-In Tool | 1 | |
| 62203-0460 | Impact™ Backplane Press-In Tool | 1 | |
| 62203-0485 | Impact™ Backplane Press-In Tool | 1 | |
| 62203-0575 | Impact™ Backplane Press-In Tool | 1 | |
| 62203-0580 | Impact™ Backplane Press-In Tool | 1 | |
| 62203-0585 | Impact™ Backplane Press-In Tool | 1 | |
| 62203-0600 | Imperium™ Cable Ferrule Assembly Press | 1 | |
| 62203-0700 | Press-In Tool for zHD Connector Assembly | 1 | |
| 62203-0770 | Press-In Tool for iPass Vertical zHD | 1 | |
| 62203-1000 | Imperium™ Cable Seal Assembly Press | 1 | |
| 62395T69 | HAND ROLLER TO APPLY PRESSURE TO REPAIRS, AND ENGAGE VELCRO | 1 | |
| 623A050-A | SOUND PRESSURE GAUGE TEST FIXTURE | 1 | |
| 6270 | TESTER - PITOT / STATIC PRESSURE (HIGH PRECISION) | 3 | |
| 627098-5 | SENSOR-PRESSURE, HIGH STAGE | 1 | |
| 62B-4A-0010 | PRESSURE GAGE | 1 | |
| 62C-4C-0020 | GAUGE-DIFFERENTIAL PRESSURE, PORTABLE (0-20 IN OF WATER) | 2 | |
| 62D-4C-0010 | GAUGE, PRESSURE | 1 | |
| 63-1008AL-02L | PRESSURE GAUGE (0-600PSI) | 1 | |
| 63-1008AL-02L,0-5000 | PRESSURE GAUGE - 0-5000 PSI/0-350 | 1 | |
| 63-1008AL-02L-300 | PRESSURE GAUGE 0-300 PSI | 1 | |
| 63-1008AL-02L-3000 | PRESSURE GAUGE 0-3000 PSI | 1 | |
| 63-40088D-02L | PRESSURE GAGE | 1 | |
| 63-4008BD-02L | PRESSURE GAGE | 1 | |
| 63-7211-25 | PRESSURE GAUGE 0-350 PSI | 1 | |
| 63-7211-26 | PRESSURE GAUGE 0-350 PSI | 1 | |
| 63/2500 | PRESS BRAKE MACHINE CNC | 1 | |
| 6300 | MANIFOLD PRESSURE GAUGE | 10 | |
| 635A030-A | CABIN PRESSURE ADJUSTMENT EQUIPMENT | 1 | |
| 636-3000-35GSE | TESTER LATCH PRESSUR | 4 | |
| 63605-001 | DE-ICING PRESSURIZATION ABAS KIT | 3 | |
| 63610FE380190 | COMPRESSION TOOL | 1 | |
| 63621FE380190 | SPRING COMPRESSION TOOL | 1 | |
| 63801-8900 | UP60 Air Crimp Press for Loose Product | 1 | |
| 6388008-1 | CABIN PRESSURIZATION BREAKOUT BOX | 1 | |
| 6388008-1 - 525A/B | CABIN PRESSURIZATION BREAKOUT BOX | 1 | |
| 6398-AT1 | PRESS FIXTURE PARKER HSD ASSEMBLY | 1 | |
| 64-CGMP | MICROPRESS TOOL | 3 | |
| 6400-3-4-O | ADAPTER - ALTITUDE PRESSURE SWITCH TO AIR DATA TEST SET | 1 | |
| 64000-0041 | Manual Standard Press for SC Power Connector | 1 | |
| 64006-0200 | Manual Arbor Press, SC Power Connector | 1 | |
| 64008-0170 | Square DIN style die sets used with Metric 6mm² (10 AWG) compression lug. | 1 | |
| 64008-0270 | Square DIN style die sets used with Metric 10mm² (8 AWG) compression lug | 1 | |
| 64008-0370 | Square DIN style die sets used with Metric 16mm² (6 AWG) compression lug | 1 | |
| 64008-0470 | Square DIN style die sets used with Metric 25mm² (4 AWG) compression lug | 1 | |
| 64008-0570 | Square DIN style die sets used with Metric 35mm² (2AWG) compression lugs | 1 | |
| 64008-0670 | Square DIN style die sets used with Metric 50mm² (1AWG) compression lugs | 1 | |
| 64008-0770 | Square DIN style die sets used with Metric 70mm² (2/0 AWG) compression lugs | 1 | |
| 64008-0870 | Square DIN style die sets used with Metric 95mm² (3/0 AWG) compression lug. | 1 | |
| 64008-0970 | Square DIN style die sets used with 4/0 compression lugs | 1 | |
| 64008-1070 | Square DIN style die sets used with 300 MCM compression lugs | 1 | |
| 64008-1170 | Square DIN style die sets used with 4/0 (14mm wide) compression lugs | 1 | |
| 64008-1270 | Square DIN style die sets used with 300 MCM (14 mm wide) compression lugs | 1 | |
| 641109-5 | COMPRESSOR DISCHARGE THERMAL SWITCH | 1 | |
| 64199-000-1 | PRESSURE SEPERATOR | 1 | |
| 64200B2F46H | FUEL PRESSURE SWITCH | 1 | |
| 64251-409-2 | MGB OIL PRESSURE TRANSMETTER | 1 | |
| 64299-1 | PRESSURE GAGE | 1 | |
| 645 | PRESSURE REGULATOR 645 | 2 | |
| 64C4 | C-YOKE COMPRESSION ADDAPTER | 1 | |
| 64CGMP | COMPRESSING TOOL,SPLICING SLEEVE | 3 | |
| 65-44761-21 | INPUT ARM PRESSING FIXTURE | 1 | |
| 65-44761-F21 | Input Arm Pressure Fixture | 1 | |
| 65-44834-F6 | Rod End Assembly Pressing Fixture | 1 | |
| 65-44836-T1 | Pressing Tool | 1 | |
| 65-7-01FE174 | SPRING COMPRESSION TOOL | 1 | |
| 65-90305-15 | HYDRAULIC PRESSURE MODULE | 6 | |
| 65-90305-17 | STANDBY PRESS. FILTER KIT | 8 | |
| 65-90305-25 | APU LOW PRESSURE FUE | 8 | |
| 65-90305-32 | POTABLE WATER PRESSU | 9 | |
| 65-90305-40A | PTU PRESS. FILTER KIT | 10 | |
| 65-90305-67 | PRESSURIZATION SAFTY | 1 | |
| 65-90305-85 | PRESSURIZATION SAFETY RELIEF VALVE | 2 | |
| 65-92528-1 | REPAIR KIT, HYDRAULIC TUBING (TEMP. REPAIRS, OPERATING PRESSURES UP TO AND INCLUDING 3000 PSI) (APPROVED FOR TITANIUM) | 4 | |
| 65-92528-11 | REPAIR KIT, HYDRAULIC TUBING (TEMP. REPAIRS, OPERATING PRESSURES UP TO AND INCLUDING 3000 PSI) (APPROVED FOR TITANIUM) | 1 | |
| 65-92528-37 | REPAIR KIT, HYDRAULIC TUBING (TEMP. REPAIRS, OPERATING PRESSURES UP TO AND INCLUDING 3000 PSI) (APPROVED FOR TITANIUM) | 1 | |
| 65012T2 | PRESSING TOOL | 1 | |
| 6501FE137 | PRESSURE RELIEF VALVE ASSEMBLY | 1 | |
| 65026815-5 | PRESSURE GAUGE | 1 | |
| 651NHG | PRESSURE GAUGE TOOL | 1 | |
| 6552-S54-1 | ARBOR PRESS TOOLING | 1 | |
| 65572-T1 | PRESSING TOOL | 2 | |
| 65572T001 | PRESSING TOOL | 1 | |
| 65572T002 | PRESSING TOOL | 1 | |
| 65572T1 | PRESSING FIXTURE | 2 | |
| 65572T2 | Pressing Tool | 2 | |
| 65606T200 | PRESSING TOOL | 1 | |
| 657-02FE209-000 | SPRING CIMPRESSION TOOL | 1 | |
| 657-02FE250-000 | SPRING COMPRESSION TOOL | 1 | |
| 65702-FE209-000 | SPRING COMPRESSION TOOL | 1 | |
| 65702FE240-002 | SPRING COMPRESSION TOOL | 1 | |
| 65702FE250000 | SPRING COMPRESSION TOOL | 1 | |
| 65712-1 | PRESSURE CHUCK | 1 | |
| 65712-1 (D18302 VALVE/REGULA- TORS) | PRESSURE CHUCK (D18302 VALVE/REGULA- TORS) | 1 | |
| 65712-3 | PRESSURE CHUCK | 1 | |
| 65885T1 | PRESSING TOOL | 1 | |
| 65B08171-291 | DEPRESSOR - SEAL | 1 | |
| 65C26810-3144 | TUBE ASSY- EMER BRAKE PRESSURE | 1 | |
| 65C26840-3087 | TUBE ASSY HYD STBY SYS PRESS | 1 | |
| 65C37849-15 | TOP-KIT, RETROFIT, CABIN ALTITUDE PRESSURE SWITCH INSTALLATION | 1 | |
| 65C37849-32 | CABIN ALTITUDE PRESSURE SWITCH INSTALLATION | 1 | |
| 65C38818-1 | CABIN ALTITUDE PRESSURE SWITCH | 1 | |
| 65C38818-13 | CABIN ALTITUDE PRESSURE | 1 | |
| 65C38818-8 | BRACKET INSTALLATION OF CABIN ALTITUDE PRESSURE SWITCH | 1 | |
| 65Y18795-4 | PRESSURE WQUIPMENT, AR RECEPTACLE MANIFOLD | 1 | |
| 66-0129-1 | CAP: INDICATOR LIGHT,PRESS TO TEST, | 1 | |
| 66-201 | ADAPTER-PRESSURE | 1 | |
| 6600-NG | TESTER - PITOT / STATIC PRESSURE (HIGH PRECISION) | 7 | |
| 6600NG | TESTER - PITOT / STATIC PRESSURE (HIGH PRECISION) | 7 | |
| 66048-4 | ADAPTER, PRESSURE CHUCK | 1 | |
| 6607A3-22 | HYD. PRESSURE SWITCH | 1 | |
| 660N48XNTLSXX | VACUUM PUMP & COMPRESSOR | 1 | |
| 661-D/C140 | PRESSURE INDICATOR | 1 | |
| 66325A23 | TANK MOUNT PRESSURE -REGULATING VALVE , SINGLE -STAGE , 45 DEGREE FLARED - MALE X CGA 580 NGO MALE | 1 | |
| 66325A61 | GAS PURGING REGULATOR ASSY (CONTAINS PRESSURE REGULATOR, HOZE AND RELATED FITTINGS) | 1 | |
| 6635T4 | TOOL: SPRING DIAL COMPRESS | 1 | |
| 6635T9 | TENSION & COMPRESSION FORCE GAUGE | 1 | |
| 6637A24 | TIRE PRESSURE GAUGE | 1 | |
| 66731-1 | TOOL - ADAPTER, PRESSURE TEST VALVE, C37099-103 | 2 | |
| 6685-00-248-6974 | GAUGE TIRE PRESSURE | 1 | |
| 6685-00-547-4696 | PRESSURE GAUGE | 1 | |
| 6685-00-816-4146 | TYRE PRESSURE GAUGE | 1 | |
| 6685-00-816-4147 | TYRE PRESSURE GAUGE | 1 | |
| 6685-01-326-9186 | PRESSURE GAUGE | 1 | |
| 6685-01-417-8777 | PRESSURE GAUGE 0-15000 PSI | 1 | |
| 6685P316SS | PRESSURE GAGE 4" DIAL | 1 | |
| 6688001-1 | CABIN PRESSURIZATION BREAKOUT BOX 560-0539 AND ON | 1 | |
| 67220647-1 | PRESSURE DROP TUBE | 1 | |
| 67220647-2 | PRESSURE DROP TUBE | 1 | |
| 6734A12 | SPRING COMPRESSOR | 1 | |
| 6743A010000 | VALVE OVERPRESSURE | 1 | |
| 67587T5 | PRESSING FIXTURE | 1 | |
| 6774B030000 | VALVE-BLEED PRESSURE REGULATING | 1 | |
| 6777A020002 | HIGH PRESSURE VALVE | 1 | |
| 6796042-1 | GAGE - COMPRESSOR ROTOR TO VANE AXIAL CLEARANCE | 1 | |
| 6796042-3 | GAGE COMPRESSOR ROTOR TO VANE AXIAL CLEARANCE | 3 | |
| 6796042−1 | GAGE - COMPRESSOR ROTOR TO VANE ASSEMBLY AXIAL CLEARANCE | 1 | |
| 6796042−3 | GAGE - COMPRESSOR ROTOR TO VANE ASSEMBLY AXIAL CLEARANCE | 3 | |
| 6796080-201 | TOOL, SEPARATOR T-56 COMPRESSOR | 1 | |
| 6796080-202 | TOOL, SEPARATOR T-56 COMPRESSOR | 1 | |
| 6796080−201 | SEPARATOR - COMPRESSOR ROTOR WHEEL ASSEMBLY | 1 | |
| 6796080−202 | SEPARATOR - COMPRESSOR ROTOR WHEEL ASSEMBLY | 1 | |
| 6796125-5 | ARBOR PRESS | 2 | |
| 6796950-8 | PRESSING PLATE (BELL 206A/B) | 1 | |
| 6797058-201 | SEPARATOR - COMPRESSOR | 1 | |
| 6797058−201 | SEPARATOR - COMPRESSOR ROTOR WHEEL ASSEMBLY | 1 | |
| 6797058−202 | SEPARATOR - COMPRESSOR ROTOR WHEEL ASSEMBLY | 1 | |
| 6799627-20 | PLATE PRESS 1,2,3RD STAGES | 1 | |
| 6799627-21 | PLATE PRESS 1,2,3RD STAGES | 1 | |
| 6799627-22 | PLATE PRESS 1,2,3RD STAGES | 1 | |
| 68-3 | COMPRESSOR | 12 | |
| 68001-400-2 | TYPE GP120 GND PRESS GEN OR | 1 | |
| 68001-400−2 | TYPE GP120 GND PRESS GEN OR | 1 | |
| 68001−400−2 | TYPE GP120 GND PRESS GEN OR | 1 | |
| 6801-4-3 NOW | ADAPTER - ALTITUDE PRESSURE SWITCH TO AIR DATA TEST SET | 1 | |
| 6801-4-3 NWO | ADAPTER - ALTITUDE PRESSURE SWITCH TO AIR DATA TEST SET | 1 | |
| 6801K33-1058-02 | TAIL ROTOR VARIABLE PITCH ROCKER BUSHING PRESS | 1 | |
| 68082-36 | INDUSTRIAL PRESSURE/PROCESS GAUGE, 4" DIA, 316SS DIAPHRAGM; 0 TO 100 PSI | 1 | |
| 68428- T1 | PRESSING TOOL | 1 | |
| 68428- T1PM | PRESSING TOOL | 1 | |
| 68428T1 | PRESSING TOOL | 1 | |
| 68428T1PM | PRESSING TOOL | 1 | |
| 68930-00 | GROUND PRESSURE GENERATOR | 1 | |
| 68939-053 | PRESSURE NIPPLE | 1 | |
| 68939-053-1 | PRESSURE NIPPLE | 1 | |
| 6895995-3 | Fixture Allignment Compresser Holder | 1 | |
| 6895995-4 | DUMMY BEARING-COMPRESSOR REAR | 1 | |
| 68D240021-1001 | WAVE GUIDE PRESSURE TESTER | 1 | |
| 68D290021-1001 | HOSE ASSEMBLY-EXTERNAL FUEL TANK TRANSFER (ST7M392-1) PRESSURE GAUGE | 1 | |
| 69-35660-F1 | Arbor Press Fixture | 1 | |
| 69001369-001 | TOOL-PRESSURE TEST,ACT | 1 | |
| 69001378-001 | TOOL-PRESSURE TEST,ACT | 1 | |
| 69020-0140 | Arbor Press Fixture for Modular Plug, FCC 68, Short Body, 8/8 Circuit | 1 | |
| 69020-0320 | Arbor Press Fixture for Insulation Displacement Housings, 2-28 Circuit, 24-28 AWG Wire/ Ribbon Cable | 1 | |
| 69020-0660 | Arbor Press | 1 | |
| 69020-0680 | Arbor Press Fixture | 1 | |
| 69020-0710 | Arbor Press Fixture, 10-60 Circuit, 28 AWG Ribbon Cable | 1 | |
| 69020-0770 | Arbor Press Fixture | 1 | |
| 69020-1200 | Arbor Press Fixture | 1 | |
| 69020-1902 | Arbor Press Fixture | 1 | |
| 69020-1908 | Arbor Press Fixture | 1 | |
| 69020-1925 | Arbor Press Fixture | 1 | |
| 69020-2025 | Arbor Press Fixture | 1 | |
| 69020-2050 | Arbor Press Fixture | 1 | |
| 6905-779 | PRESSURE | 1 | |
| 6914V-SD | STANDARD SCRADER VALVE TOOL, TO REMOVE CORE OF PRESSURE TEST VALVE. | 1 | |
| 694075/1/15 | PRESSURE GAGE | 1 | |
| 69669-039 | PLACARD: PRESS TO TEST, | 1 | |
| 69841T201 | PRESSING TOOL (INSTALLATION) | 1 | |
| 69841T202 | PRESSING TOOL (REMOVAL) | 1 | |
| 6AA617-6325-001 | RESOLVER STATOR WINDING PRESS TOOL | 1 | |
| 6F | PRESSURE BLANK TOOL | 1 | |
| 6M | PRESSURE BLANK TOOL | 1 | |
| 6SF3686-21-501 | SUPPRESS | 1 | |
| 6SF4372-71-00P | JT9D Engine Compressor Bleed Air System Test Set | 1 | |
| 6SF6350-501 | FUEL TANK PRESSURE PLATE | 1 | |
| 6SV-85856 | Spring Compressor | 1 | |
| 7-363300003 | GUN STOW SPRING COMPRESSOR FIXTURE | 1 | |
| 7-562100069-601 | PRESSURE GAUGE - IPAS | 1 | |
| 7/16-20-UNJF-3A | ADAPTER FITTING ON PRESSURE SWITCH | 1 | |
| 700 BAR | PRESSURE GAUGE | 1 | |
| 700-T-090-19 | PRESSURE AND VACUUM TEST SET | 2 | |
| 700-T-090-29 | PRESSURE AND VACUUM TEST SET | 1 | |
| 700-T-091-19 | PRESSURE TEST TOOL | 1 | |
| 700-T-091-9 | PRESSURE TEST TOOL | 1 | |
| 7000 PSI | PRESSURE GAUGE | 1 | |
| 70001T127 | PRECISION ARBOR PRESS | 1 | |
| 7001T127 | Precision Arbor Press | 1 | |
| 700G27 | PRESSURE GAUGE CALIBRATOR | 1 | |
| 700G31 | PRESSURE GAUGE CALIBRATOR | 1 | |
| 700T09019 | VACUUM AND PRESSURE TEST SET | 2 | |
| 7010 | Precision Pressure Indicator / Controller | 1 | |
| 7011 | COMPRESSION RIVETER | 8 | |
| 703A92-0201-00 | CAP BLANKING TOTAL PRESSURE HEAD | 1 | |
| 703A92-0201-00/PHP | CAP BLANKING TOTAL PRESSURE HEAD | 1 | |
| 703A92020100 | CAP BLANKING TOTAL PRESSURE HEAD | 1 | |
| 703A980000-0 | HYDRAULIC PRESS COMPONENTS | 1 | |
| 7041T-W | PRESSURE REGULATOR | 1 | |
| 7046 | Compressor – Spring | 3 | |
| 7046-011 | CART - NITROGEN BOTTLE WITH HIGH AND LOW PRESSURE REGULATOR. CARRIES (3) BOTTLES (NOT INCLUDED) | 2 | |
| 704A37-7210-55 | SWITCH,PRESSURE,MGB OIL | 1 | |
| 7056B33 | GAUGE, 5000 PSI PRESSURE - MFG: NAT | 1 | |
| 7056B336 | GAUGE, 5000 PSI PRESSURE - MFG: NAT - P/N# 7056B336 | 1 | |
| 70646A010001 | VALVE-OVERPRESSURE | 1 | |
| 70700-77300-041 | COMPRESSOR, SPRING | 1 | |
| 709-0856 | PRESSURE GAUGE - HEAVY DUTY (0-300 PSI) | 1 | |
| 71069A020001 | PRESSURE REGULATING VALVE | 1 | |
| 710M | 3M™ 710 5-PAIR HAND PRESSER KIT WITH CASE 3M710-HTK05A, 5-PAIR | 1 | |
| 711300-15 | PRESSURE RELIEF DOOR LATCH TOOL | 1 | |
| 7119M90P01 | PS14 PRESSURE PROBE | 1 | |
| 7123-19973-02AB | MODULE ASSY CAB PRESSURE P5-6: PART NUMBER/DE | 1 | |
| 71289-1 | CAP, PRESSURE SEAL | 1 | |
| 715-1 | PRESSURE HOSE - MAIN WHEEL AXLE JACK - BOEING | 1 | |
| 718-30G | PRESSURE CALIBRATOR | 3 | |
| 7198 | Pressure Calibration Accessories Kit | 1 | |
| 71988-101 | EJECTOR BAG OVERPRESSURE TEST | 1 | |
| 72-0063-01-IAS | GE CF34-8 COMPRESSOR BLADE SERVICE CART | 1 | |
| 72-500 | ANTI-SKID / VALVE TESTER PRESSURE vs CURRENT WIDE BODY | 2 | |
| 72-500-16 | TESTER - CABIN PRESSURIZATION (SPL-907) | 1 | |
| 72-6B | HYDRAULIC PRESSURE BENCH400B | 1 | |
| 721 | HIGH-ACCURACY PRESSURE CALIBRATOR WITH A WIDE MEASUREMENT RANGE, IDEAL FOR CALIBRATING GAUGES AND TRANSDUCERS. | 1 | |
| 7251 | PRESSURE DIFFERENTIAL TESTING TOOL | 1 | |
| 725A-HF | ALLIGATOR COMPRESSION RIVET SQUEEZER 3IN REACH | 1 | |
| 725A-HF-8523-7362 | RIVETER-COMPRESSION | 1 | |
| 727 APU CRACKING PRESS. KIT | APU CRACKING PRESS. KIT | 1 | |
| 72977-62 | Hydraulic Brake System Pressure Checking Gage | 1 | |
| 72P2131001N001 | CABIN PRESSURE CONTROL SYSTEM TEST SET | 1 | |
| 73-5 | PRESS PLATE | 2 | |
| 7310 | High Pressure Pneumatic Controller / Test Set | 7 | |
| 7334117G1 | ADAPTER,PRESSURE TEST | 1 | |
| 737-004 | PRESSURE BLANK KIT | 1 | |
| 7416805-1 | PRESSURE DROP TUBE SET | 1 | |
| 7430 | SPRING: CASTER,COMPRESSED, | 2 | |
| 744F | GAGE ASSEMBLY - PRESSURE TEST, FUEL - SPL-7344 | 1 | |
| 754 | PROCESS CALIBRATOR (PRESSURE CALIBRATOR) | 1 | |
| 747 MLG-1100 | COMPRESSION STRAP | 1 | |
| 7500 | PISTON RING PRESS | 1 | |
| 750A-2087-1767 | SQUEEZER ALLIGATOR (COMPRESSION RIVETER WITH (5' 3/16') AL | 1 | |
| 750A-5 | SQUEEZER ALLIGATOR (COMPRESSION RIVETER WITH (5' 3/16') AL | 1 | |
| 751148ME | PRESSURE TEST PLUG (PRESSURE SWITCH) | 1 | |
| 751151ME | PRESSURE TEST PLUG (OUTLET) | 1 | |
| 756-7675 | SWITCH PRESSURE | 1 | |
| 7603-1000 | CABIN PRESSURIZATION TEST CART | 1 | |
| 76036T4 | ARBOR PRESS | 1 | |
| 7610 | High Pressure Hydraulic Controller / Test Set | 1 | |
| 76E0400-3 | COMPRESSOR CONTROL SPRAYING UNIT | 1 | |
| 76EO4000-30-A | COMPRESSOR WASH CART | 2 | |
| 77-01611-03 | PRESSURE GAGE (MECHANICAL/DIGITAL) | 1 | |
| 77-01611-13 | NITROGEN PRESSURE GAGE | 1 | |
| 77-01612-03 | DIGITAL PRESSURE GAUGE | 1 | |
| 77000-620 | WATER PRESSURIZATION ASSY | 1 | |
| 77144-T | ADAPTER-TORQUE, AUTO BRAKE PRESSURE | 1 | |
| 77144-T6 | ADAPTER TORQUE, AUTO BRAKE PRESSURE | 1 | |
| 77144-T6PM | ADAPTER - TORQUE, AUTO BRAKE PRESSURE CONTROL MODULE FILTER | 1 | |
| 772B | Pressure Gauge | 3 | |
| 772B MK2 | INFLATION KIT AND 3500 PSI PRESSURE GAUGE | 9 | |
| 772BMK2 | PRESSURE GUAGE | 9 | |
| 777GEN011 | BRAKE PRESSURE MEASURING ADAPTER | 1 | |
| 77896-RST2209-A | SWAGE PRESS | 1 | |
| 781019-0 | HYDR.FOOT PUMP WITHOUT PRESSURE TUBE AND CRIMPING HEAD | 2 | |
| 78164-46 | KNF N816.3 KTP VACUUM/PRESSURE PUMP, 16 L/MIN, 15 TORR, 7.4 PSIG, 115 VAC | 1 | |
| 782100-10 | PRESSURE SWITCH | 1 | |
| 783-054 | JAW FOLLOWER COMPRESSION | 1 | |
| 785791-5 | VL. PRESS. REG. SHUT OFF | 1 | |
| 78700-30000-041 | FUEL SYSTEM PRESSURE TEST CAP | 1 | |
| 79-0016-01 | Oil Pressure Indication Trouble Shooting Test Unit | 1 | |
| 79000132-1 | PRESSURE TEST FIXTURE ASSEMBLY | 1 | |
| 79001898-1 | ARBOR PRESS GREASE FITTING INSTALLATION TOOL | 1 | |
| 79002081-1 | PRESS AND STAKING FIXTURE | 1 | |
| 7916826-PTE6 | CABIN PRESSURE TESTER | 1 | |
| 792755-A | PRESSURE CONTROLLER | 1 | |
| 796884-2-009 | CABIN PRESSURE CONTROLLER | 1 | |
| 798001898-1 | ARBOR PRESS GREASE FITTING INSTALLATION TOOL | 1 | |
| 7AA617-6325-001 | GIMBAL HOUSING PRESS SUPPORT TOOL | 1 | |
| 7C2200P03 | TOOL - PRESSURE HOSE | 1 | |
| 7X000 | TESTAR - CABIN PRESSURIZATION | 1 | |
| 8-02040A1 | PRESSURE DISC | 1 | |
| 8-04220A | GAUGE,HIGH PRESSURE PANEL MNT. | 1 | |
| 8-06120A | GAUGE PRESS-RADIAL 0-16 D.40 | 1 | |
| 8.047.0068C | HIGH PRESSURE CLEANER,KIT,VERTIGO 28 PRO | 1 | |
| 80 RPM | DRILL PRESS OR END MILL MACHINE | 1 | |
| 800-426-6301 | PRESSURE GAUGE | 1 | |
| 801 | PRESSURE REGULATOR | 1 | |
| 8000 | ALTIMETER, PRESSURE | 7 | |
| 801-10 | NITROGEN PRESSURE REGULATOR | 1 | |
| 8011489-508 | BY-PASS VALVE COMPRESSION TOOL | 1 | |
| 8011520-508 | COMPRESSIONTOOL | 1 | |
| 8011522-508 | COMPRESSION SCREW | 1 | |
| 8012232-508 | COMPRESSION TOOL | 1 | |
| 8012237-508 | COMPRESSION AND DECOMPRESSION TOOL | 1 | |
| 801888-308 | COMPRESSION AND DECOMPRESSION TOOL | 1 | |
| 801900-308 | END FITTING COMPRESSION TOOL | 1 | |
| 801908-308 | COMPRESSION TOOL | 1 | |
| 8048 | OIL PRESSURE RELIEF SPOT FACER | 1 | |
| 807670-508 | TOOL-COMPRESSION/DECOMPRESSION | 1 | |
| 8084 | OIL PRESSURE RELIEF SPOT FACER | 1 | |
| 810-325 | WRENCH, BATTERY PRESSURE CASE | 21 | |
| 81012597-01 | WASHING RING COMPRESSOR | 1 | |
| 81014-1-303 | DIAL INDICATING PRESSURE GUAGE | 1 | |
| 81014-302 | GAGE PRESSURE DIAL | 1 | |
| 810193-1-T-284 | Pressure Test Cap | 1 | |
| 810193-1-T-286 | Pressure Test Cap | 1 | |
| 810214-1T1 | Pressure Test Cap | 1 | |
| 810272-1-T-281 | Pressure Test Cap | 1 | |
| 810272-1-T-281PM | PRESSURE TEST CAP | 1 | |
| 811 | COMPRESSION SPRING, 1.375"OD X 4.5" LG | 1 | |
| 813676-T3 | Spring Compressor Ring | 1 | |
| 813676-T4-1 | Spring Compressor Ring | 1 | |
| 813676T4-1 | SPRING COMPRESSION RING | 1 | |
| 81530-7 | SYSTEM PRESSURE GUAGE | 1 | |
| 817402/1/2 | TIRE PRESSURE GAUGE 200 PSI | 1 | |
| 820965-7 | PRESSURE SENSOR | 1 | |
| 825 | PRESSURE REGULATOR | 1 | |
| 8230 | PRESSURE GAUGE | 1 | |
| 825DS-25-N2 | NITROGEN PRESSURE REGULATOR | 1 | |
| 826-66-00 | HIGH PRESSURE-OXYGEN REGULATOR | 1 | |
| 83-008001-02 | TIRE PRESSURE SENSOR(TPS) HANDHELD READER | 1 | |
| 83-008001-03 | KIT, TIRE PRESSURE SENSOR HAND HELD READER (120VAC) WITH CHARGER | 1 | |
| 83-008001-03E | KIT, TIRE PRESSURE SENSOR HAND HELD READER (120VAC) WITH CHARGER | 1 | |
| 83-008−03E | KIT, TIRE PRESSURE SENSOR HAND HELD READER (120VAC) WITH CHARGER | 1 | |
| 83-200-01 | TIRE PRESSURE | 1 | |
| 83-2727 | PRESSURE GAUGE | 1 | |
| 830006-809-00090-1 | ARBOR PRESS | 1 | |
| 830006-809-00090-8 | ARBOR PRESS FOR 369A7951-15 | 1 | |
| 830006-809-00671 | ARBOR PRESS FIXTURE TAIL ROTOR GEARBOX HOUSING | 1 | |
| 83006-809-00090-1 | ARBOR PRESS FIXTURE | 1 | |
| 83006-809-00090-8 | ARBOR PRESS FIXTURE | 1 | |
| 831101-1 | PULLER, LOW PRESSURE TURBINE SEAL | 1 | |
| 831132-1 | Bearing Press Fixture Split Plate | 1 | |
| 831351-1 | SEAL PRESSING DRIVER | 1 | |
| 832667-1 | PROBE ASSEMBLY, PRESSURE AND TEMPERATURE | 1 | |
| 832668-1 | PRESS AND TEMP PROBE ASSY PT3.0 | 1 | |
| 833093-1 | TURBINE COMPRESSOR HOLDER FIXTURE | 1 | |
| 833102-1 | COMPRESSOR CENTERING FIXTURE | 1 | |
| 833110-12 | FIXTURE, SEAL PRESSING | 1 | |
| 833180-1 | Pin Press Fixture (2 ITEMS) | 1 | |
| 833187-1 | PLENUM PRESS FIXTURE | 1 | |
| 833201-1 | FIXTURE BEARING PRESSING | 1 | |
| 833202-1 | SET FIXTURE BEARING PRESSING | 1 | |
| 833212-1 | PRESS FIXTURE | 1 | |
| 833219-1 | PRESSURE TAP ADAPTER | 1 | |
| 833221-1 | FIXTURE PRESS | 1 | |
| 833267-1 | TESTER, CABIN PRESSURIZATION | 1 | |
| 833289-1/-2 | Reducer Tube Press Fixture | 1 | |
| 833311-1 | PIN PRESS FIXTURE | 1 | |
| 833437-1 | FIXTURE, BEARING PRESS | 1 | |
| 833438-2 | FIXTURE BEARING PRESS | 1 | |
| 833465-1 | SET ADAPTERS BEARING PRESS | 1 | |
| 833468-1 | Shaft Roller Press Fixture | 1 | |
| 833543-1 | FIXTURE ASSEMBLY SEAL PRESS | 1 | |
| 833668-1 | SIDE PORT PRESSURE ADAPTER | 1 | |
| 833834-1 | CABIN PRESSURE TESTER | 3 | |
| 833835-4 | CABIN PRESSURE SAFETY VALVE TEST ADAPTER B | 1 | |
| 833856-1 | ROTARY ACTUATOR SHAFT DEPRESSOR | 2 | |
| 833858-1 | Holding Press Fixture | 1 | |
| 833936-1 | SPACER COMPRESSOR | 1 | |
| 833978-1 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860165-1 OIL PUMP SPUR GEAR FROM 358027 BEARINGS) | 1 | |
| 833978-4 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860166-1 HIGH SPEED PINION GEAR FROM 3860158-1 BEARING) | 1 | |
| 833978-5 | BEARING REMOVAL ADAPTER (LOCATES IN SMALLER INSIDE DIAMETER OF 3860180-2 SPUR GEAR SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPUR GEAR FROM 3605094-1 BEARING) | 1 | |
| 833978-6 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860182-1 SPUR GEAR FROM | 1 | |
| 833978-7 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860182-1 SPUR GEAR FROM | 1 | |
| 833978-9 | BEARING REMOVAL ADAPTER (LOCATES IN SMALLER INSIDE DIAMETER OF 3860167-1 SPLINED SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPLINED SHAFT FROM 892575-1 BEARING) | 1 | |
| 834015-1 | PRESS TOOL | 1 | |
| 834016-1 | PRESS TOOL | 1 | |
| 834018-1 | CLUTCH ROTOR PRESS FIXTURE | 1 | |
| 834019-1 | PRESS TOOL | 1 | |
| 834105-1 | PRESS TOOL | 1 | |
| 834190-1 | Spring Compressor | 1 | |
| 834213-1 | Spring Compressor Fixture | 1 | |
| 834223-1 | SPRING COMPRESSION FIXTURE | 1 | |
| 834223-1PM | SPRING COMPRESSION FIXTURE | 1 | |
| 834223-2 | SPRING COMPRESSION FIXTURE | 1 | |
| 834223-2PM | SPRING COMPRESSION FIXTURE | 1 | |
| 834238-1 | Piston Ring Compressor | 1 | |
| 834238-1A | PISTON RING COMPRESSOR (5 IT) | 1 | |
| 834311-1 | Bearing Press Tool | 1 | |
| 834533-1 | PRESSURE TEST FIXTURE | 1 | |
| 834640-1 | BALLSCREW PRESS FIXTURE | 1 | |
| 834659-1 | BALL PRESS PLATE | 1 | |
| 834672-1 | COMPRESSOR ROTOR SUPPORT | 1 | |
| 834675-1 | COMPRESSOR ROTOR INSTALL FIXTURE | 1 | |
| 834708-1 | TOOL: COMPRESSOR & GEARBOX | 1 | |
| 834728-1 | ADAPTER, LIFTING, ENGINE COMPRESSOR MODULE | 1 | |
| 834737-1 | ADAPTER, PRESS | 1 | |
| 834759-8 | BUTTON PRESS | 1 | |
| 834815-1 | LOAD COMPRESSOR CENTERING TOOL | 2 | |
| 834846-1 | FIXTURE, TEST, PRESSURE SENSOR | 1 | |
| 834864-1 | DRIVEN COMPRESSOR COUPLING | 1 | |
| 834947-1 | PRESSURE COMPRESSOR DISCHARGE (PCD) PROBE TEMPERATURE COMPRESSOR DISCHARGE (TCD) PROBE | 1 | |
| 835022-1 | Press Arbor | 1 | |
| 835042-1 | Compressing Arbor | 1 | |
| 835087-1 | Press Fixture | 1 | |
| 835094-1 | Compress Fixture | 1 | |
| 835102-1 | Coupling Arbor Press | 1 | |
| 835158-1 | Bearing, Press Arbor | 1 | |
| 835319-1 | Pressure Test Set | 1 | |
| 835364-2 | PIN PRESSING TOOLING | 1 | |
| 835424-1 | SPRING COMPRESSION TOOL | 1 | |
| 835689-1 | BEARING PRESS FIXTURE | 1 | |
| 835690-1 | PRESSURE CHECK ADAPTER | 1 | |
| 835695-1 | DPV PRESS SWITCH TOOL | 1 | |
| 835700-1 | BEARING PRESS FIXTURE | 1 | |
| 835701-1 | BEARING PRESS FIXTURE | 1 | |
| 835703-1 | BEARING PRESS FIXTURE | 1 | |
| 835724-1 | Seal Press Arbor | 1 | |
| 835726-1 | Arbor Pressing | 1 | |
| 835790-1 | Air press adapter | 1 | |
| 835801-1 | Seal Press Fixture | 1 | |
| 835808-1 | Rotor Press Arbor | 1 | |
| 835809-1 | Bearing Press Arbor | 1 | |
| 835815-1 | PISTON RING COMPRESSOR | 1 | |
| 835816-1 | PISTON RING COMPRESSOR | 1 | |
| 835818-1 | Race Press Arbor | 1 | |
| 835819-1 | Race Press Fixture | 1 | |
| 835839-1 | Press and Torque Fixture | 1 | |
| 835844-1 | Pin Press Tool | 1 | |
| 835848-1 | Bearing Press Base | 1 | |
| 835850-1 | Bearing Press Base | 1 | |
| 835869-1 | Bearing Press Fixture | 1 | |
| 835887-1 | Spring Compressor | 1 | |
| 835887-1PM | SPRING COMPRESSOR | 1 | |
| 8378M12 | COMPRESSOR AIR 340 | 4 | |
| 83C-220 | 2.8 GAL; PRESSURE TANK | 1 | |
| 84003747-002 | PRESS/TEMP TRASDUCER | 1 | |
| 842-652012-1 | PRESSURE EQUIPMENT, AR RECEPTACLE MANIFOLD | 1 | |
| 8480004-40 | GAGE PRESSURE | 1 | |
| 85101-FE174-500 | TANK PRESSURE TOOL | 1 | |
| 85101-FE27721001 | TANK PRESSURE TOOL | 1 | |
| 85101-FE277211001 | Tank Pressure Tool | 1 | |
| 85101-FE374101 | TANK PRESSURE TOOL | 1 | |
| 85101FE24020101 | TEST RING FOR PRESSURE | 1 | |
| 85101FE374401200 | TANK PRESSURE TOOL | 1 | |
| 85201-FE24050001 | PRESSURE CHECK TOOL | 1 | |
| 85201FE209-500 | TEST TOOL FOR THE PRESSURE REDUCING VALVE | 1 | |
| 85202-FE209-00012 | TANK PRESSURE TOOL | 1 | |
| 85208FE20900012 | TEST TOOL FOR THE GAS BOTTLE PRESSURE | 1 | |
| 8523-7365 | ALLIGATOR COMPRESSION RIVET SQUEEZER 3IN REACH | 1 | |
| 854.00-00-00-05 | REGULATOR, HIGH PRESSURE (15-2500 PSI) | 1 | |
| 85420-1.6 | REMOTE SET PRESSURE GAGUE 0-160 PSI | 1 | |
| 8561278G03 | FUEL MANIFOLD PRESSURE CHECK | 1 | |
| 856A 1186G03 | SENSOR,TEMPERATURE AND PRESSURE -T25/P25 | 3 | |
| 856A1005 | WRENCH - COMPRESSOR ROTOR LOCKING LUG | 1 | |
| 856A1005 G02 | Wrench - Compressor Rotor Locking Lug | 10 | |
| 856A1005G01 | WRENCH - COMPRESSOR ROTOR LOCKING LUG | 1 | |
| 856A1005G02 | Wrench - Compressor Rotor Locking Lug (wrench) | 10 | |
| 856A1006 | ADAPTER TORQUE - COMPRESSOR ST | 1 | |
| 856A1006 G01 | Torque Adapter Wrench - Compressor Stator To Support | 11 | |
| 856A1006G01 | Wrench, Torque Adapter - Compressor Stator Nuts (torque adapter) | 11 | |
| 856A1010 | WRENCH, RATCHET - COMPRESSOR ROTOR INTERNAL NUT | 1 | |
| 856A1010G01 | WRENCH, RATCHET - COMPRESSOR ROTOR INTERNAL NUT | 7 | |
| 856A1012 | LEVER, COUNTERTORQUE - COMPRESSOR STATOR VANE ACTUATOR ARM ( COUNTERTORQUE LEVER) | 2 | |
| 856A1012 G01 | Countertorque Lever - Compressor Stator Vane Actuator | 16 | |
| 856A1012G01 | COUNTER TORQUE,COMPRESSOR STATOR VANE AC | 16 | |
| 856A1016 | STAND, COMPRESSOR ROTOR AND HPT ROTOR - VERTICAL | 1 | |
| 856A1016 G05 | Stand Compressor Rotor | 10 | |
| 856A1016G03 | STAND, COMPRESSOR ROTOR AND HPT ROTOR - VERTICAL | 1 | |
| 856A1016G04 | STAND, COMPRESSOR ROTOR AND HPTR VERTICAL (STAND) | 1 | |
| 856A1016G05 | Stand, Compressor Rotor and HPTR Vertical (vertical stand) | 10 | |
| 856A1017 | PULLER, IMPACT - HIGH PRESSURE TURBINE SHROUD REMOVAL | 1 | |
| 856A1017G01 | PULLER, IMPACT - HIGH PRESSURE TURBINE SHROUD REMOVAL | 1 | |
| 856A1017G02 | PULLER, IMPACT - HIGH PRESSURE TURBINE SHROUD REMOVAL | 1 | |
| 856A1017G03 | PULLER, IMPACT - HIGH PRESSURE TURBINE SHROUD REMOVAL | 4 | |
| 856A1017G04 | Impact Puller - High Pressure Turbine Shroud Remov | 8 | |
| 856A1021 | FIXTURE, LIFT & TURN - COMPRESSOR ROTOR ASSY | 1 | |
| 856A1021G01 | FIXTURE, LIFT & TURN - COMPRESSOR ROTOR ASSY | 1 | |
| 856A1021G02 | FIXTURE, LIFT & TURN - COMPRESSOR ROTOR ASSY | 11 | |
| 856A1023G01 | Driver, Nut Start - Compressor Rotor Stg 3 to 4 Flange Bolts (nut start driver) | 6 | |
| 856A1025 | LOCATOR, SEAL WIRES - COMPRESSOR ROTOR (SEAL WIRES LOCATOR) | 1 | |
| 856A1025G02 | Locator, Seal Wires - Compressor Rotor (seal wires locator) | 10 | |
| 856A1026G02 | FIXTURE, LIFT - COMPRESSOR ROTOR, STAGE 4-9 SPOOL, AFT HPTR | 4 | |
| 856A1027 | FIXTURE, LIFT - COMPRESSOR ROTOR STAGE 3 DISK AND BLADES | 1 | |
| 856A1027 G01 | Lift Fixture - Compressor Rotor Stage 3 Disk and Blades | 10 | |
| 856A1027G01 | FIXTURE, LIFT - COMPRESSOR. | 10 | |
| 856A1028 | FIXTURE, LIFT - COMPRESSOR ROTOR SIG 1&2 SPOOL AFT-STG 4-9 SPOOL FWD | 1 | |
| 856A1028G01 | FIXTURE, LIFT - COMPRESSOR ROTOR SIG 1&2 SPOOL AFT-STG 4-9 SPOOL FWD | 10 | |
| 856A1029 | FIXTURE, LIFT - COMPRESSOR ROTOR STAGE 1-2 SPOOL, FORWARD | 1 | |
| 856A1029G01 | FIXTURE, LIFT - COMPRESSOR ROTOR STAGE 1-2 SPOOL, FORWARD | 1 | |
| 856A1029G02 | FIXTURE, LIFT - COMPRESSOR ROTOR STAGE 1-2 SPOOL, FORWARD | 2 | |
| 856A1036G01 | WRENCH, TORQUE ADAPTER - COMPRESSOR STATOR TO SUPP | 1 | |
| 856A1051 | PULLER,ARM-COMPRESSOR STATOR ACTUATION | 3 | |
| 856A1051 G01 | Puller Arm ‐ Compressor Stator Actuation | 6 | |
| 856A1051 REV D | PULLER, ARM COMPRESSOR STATOR ACTUATION | 1 | |
| 856A1051G01 | Puller Arm - Compressor Stator | 6 | |
| 856A1051G02 | PULLER ARM-COMPRESSOR | 17 | |
| 856A1056 G05 | Fixture, Grind - Compressor Stator Flowpath | 8 | |
| 856A1056G03 | FIXTURE, GRIND - COMPRESSOR STATOR FLOW PATH (GRIND FIXTURE) | 1 | |
| 856A1056G04 | FIXTURE, GRIND - COMPRESSOR STATOR FLOWPATH | 5 | |
| 856A1056G05 | VIBRATOR, COMPRESSOR ROTOR BLADES-RE | 8 | |
| 856A1058G01 | VIBRATOR, COMPRESSOR ROTOR BLADES - REMOVAL AND INSTALLATION (BLADE VIBRATOR) | 4 | |
| 856A1058G02 | VIBRATOR, COMPRESSOR ROTOR BLADES - REMOVAL AND INSTALLATION (BLADE VIBRATOR) | 5 | |
| 856A1062G01 | FIXTURE CHILL（TO PROVIDE FOR CHILLING OF THE HIGH PRESSURE TURBINE FORWARD SHAFT.） | 1 | |
| 856A1063 | TOOL SET - COMPRESSOR STATOR SECTORS AND LINERS INSTALLATION | 1 | |
| 856A1063G03 | TOOL SET - COMPRESSOR STATOR SECTORS AND LINERS INSTALLATION | 3 | |
| 856A1063G05 | TOOL SET COPRESSOR STATOR SECTORS AND LINERS INSTALLATION | 3 | |
| 856A1063G06 | COMPRESSOR STATOR SECTORS AND LINERS INSTALLATION | 5 | |
| 856A1063G07 | TOOL SET - COMPRESSOR STATOR SECTORS AND LINERS INSTALLATION | 8 | |
| 856A1068 | GAGE - LOCKING LUG - COMPRESSO | 1 | |
| 856A1068 (G02) | GAGE, LOCKING LUG - COMPRESSOR ROTOR ASSEMBLY | 11 | |
| 856A1068G01 | GAGE, LOCKING LUG - COMPRESSOR ROTOR ASSEMBLY (LOCKING LUG GAGE) | 1 | |
| 856A1068G02 | GAGE, LOCKING LUG- COMPRESSORROTOR ASSEMBLY | 11 | |
| 856A1071 | TOOL SET, REMOVAL COMPRESSOR STATOR LINERS AND VANE SEGMENTS | 1 | |
| 856A1071G05 | TOOL SET, REMOVAL COMPRESSOR STATOR LINERS AND VANE SEGMENTS | 2 | |
| 856A1071G06 | TOOL SET, REMOVAL - COMPRESSOR STATOR LINERS AND V | 7 | |
| 856A1071G07 | TOOL SET, REMOVAL COMPRESSOR STATOR LINERS AND VANE SEGMENTS | 1 | |
| 856A1072 | TRUCK, COMPRESSOR ROTOR, HORIZONTAL | 1 | |
| 856A1072 G04 | Truck Compressor Rotor Horizontal | 10 | |
| 856A1072G01 | TRUCK, COMPRESSOR ROTOR, HORIZONTAL | 1 | |
| 856A1072G02 | TRUCK, COMPRESSOR ROTOR, HORIZONTAL | 1 | |
| 856A1072G03 | TRUCK, COMPRESSOR ROTOR, HORIZONTAL | 3 | |
| 856A1072G04 | Truck Compress | 10 | |
| 856A1073G02 | Truck, High Pressure Turbine Rotor | 1 | |
| 856A1073G03 | TRUCK HPT HORIZONTAL（TO PROVIDE FOR STORING AND TRANSPORTING THE HIGH PRESSURE TURBINE ROTOR） | 7 | |
| 856A1074 | FIXTURE, LIFT AND TURN HIGH PRESSURE TURBINE ROTOR DISK, AFT | 1 | |
| 856A1074G02 | FIXTURE, LIFT AND TURN HIGH PRESSURE TURBINE ROTOR DISK, AFT | 4 | |
| 856A1074G03 | FIXTURE, LIFT AND TURN HIGH PRESSURE TURBINE ROTOR DISK, AFT | 1 | |
| 856A1075 | FIXTURE, LIFT AND TURN HIGH PRESSURE TURBINE ROTOR DISK, AFT | 1 | |
| 856A1075G03 | FIXTURE, LIFT AND TURN HIGH PRESSURE TURBINE ROTOR DISK, AFT | 6 | |
| 856A1084G03 | PRESSURE GAUGE 0-580PSI | 7 | |
| 856A1084G04 | PRESSURE GAUGE - ACTUATOR STATOR PORT | 28 | |
| 856A1084G07 | PRESSURE GAUGE | 1 | |
| 856A1084P07 | DIAL INDICATING PRESSURE GAUGE | 1 | |
| 856A1084P17 | COMPRESSOR FRONT STATOR ASSEMBLY | 1 | |
| 856A1086G03 | SENSOR TEMPERATURE & PRESSURE (TYPE K) | 1 | |
| 856A1087 G06 | Bracket Set Handling ‐ Compressor Mid Flange | 1 | |
| 856A1087G06 | BRACKET SET, HANDLING - COMPRESSOR MID FLANGE | 1 | |
| 856A1089 | Adapter- HPTR To Compressor Rotor Nuts | 1 | |
| 856A1110 | STAND, INSTALLATION - FRONT COMPRESSOR STATOR SECTOR AND LINER | 1 | |
| 856A1110G05 | STAND, INSTALLATION - FRONT COMPRESSOR STATOR SECTOR AND LINER | 7 | |
| 856A1112G01 | STAND, INSTALLATION-REAR COMPRESSOR STATOR | 3 | |
| 856A1112G02 | STAND, INSTALLATION-REAR COMPRESSOR STATOR | 6 | |
| 856A1115 | CART,NITROGEN-FUEL MANIFOLD PRESSURE CHECK | 3 | |
| 856A1115 REV AE | CART, NITROGEN-FUEL MAN. PRESS CHECK | 1 | |
| 856A1115G01 | CART, NITROGEN-FUEL MANIFOLD PRESS CHECK | 1 | |
| 856A1115G02 | CART, NITROGEN-FUEL MANIFOLD PRESS CHECK | 1 | |
| 856A1115G03 | CART, NITROGEN - FUEL MANIFOLD PRESS CHECK | 1 | |
| 856A1115G04 | EQUIP PRESSURE MANIF | 1 | |
| 856A1115G05 | CART, NITROGEN-FUEL MANIFOLD PRESS CHECK | 3 | |
| 856A1115G06 | CART PRESSURE CHECK MANIFOLD | 3 | |
| 856A1115G07 | CART, NITROGEN -0 FUEL MANIFOLD PRESS CHECK | 15 | |
| 856A1115G07 | CART, NITROGEN - FUEL MANIFOLD PRESS CHECK | 15 | |
| 856A1115G077 | CART,NITROGEN-FUEL MANIFOLD PRESSURE CHE | 1 | |
| 856A1115G08 | CART PRESSURE CHECK | 11 | |
| 856A1115G08 | CART, NITROGEN - FUEL MANIFOLD PRESS CHECK | 11 | |
| 856A1115P04 | FUEL MANIFOLD PRESSURE CHECK TOOL | 1 | |
| 856A1118 | GAGE SET, SEATING - IGB MODULE TO COMPRESSOR ROTOR SHAFT | 1 | |
| 856A1118G01 | GAGE SET, SEATING - IGB MODULE TO COMPRESSOR ROTOR SHAFT | 3 | |
| 856A1118G02 | GAGE SET, SEATING - IGB MODULE TO COMPRESSOR ROTOR SHAFT | 1 | |
| 856A1126 | DRIVER, GUIDE STRIPS - COMPRESSOR STATOR | 1 | |
| 856A1126G02 | DRIVER GUIDE STRIPS COMPRESSOR STATOR | 6 | |
| 856A1126G03 | COMPRESSOR STATOR GUIDE STRIPS DRIVE | 3 | |
| 856A1126G04 | DRIVER, GUIDE STRIPS - COMPRESSOR STATOR | 9 | |
| 856A1140 | FIXTURE, SUPPORT - CORE MODULE TO COMPRESSOR ROTOR SHAFT | 1 | |
| 856A1140 G05 | FIXTURE, SUPPORT - CORE MODULE TO COMPRESSOR ROTOR SHAFT | 1 | |
| 856A1140G05 | FIXTURE, SUPPORT - CORE MODULE TO COMPRESSOR ROTOR SHAFT | 1 | |
| 856A1140G06 | FIXTURE, SUPPORT - CORE MODULE TO COMPRESSOR ROTOR SHAFT | 10 | |
| 856A1150 | FIXTURE, BUILDUP - COMPRESSOR ROTOR | 1 | |
| 856A1150G02 | FIXTURE, BUILD UP, COMPRESSOR ROTOR | 1 | |
| 856A1150G04 | FIXTURE, BUILDUP - COMPRESSOR ROTOR | 2 | |
| 856A1154 | MASTER, SETUP - COMPRESSOR ROTOR BUILDUP | 1 | |
| 856A1154P02 | MASTER, SETUP - COMPRESSOR ROTOR | 9 | |
| 856A1156 | PYLON, INDICATOR - COMPRESSOR ROTOR BUILDUP | 1 | |
| 856A1156G01 | PYLON, INDICATOR - COMPRESSOR ROTOR BUILDUP | 7 | |
| 856A1158 | PROBE, PITOT STATIC PRESSURE-BELLMOUTH | 1 | |
| 856A1158 (G04) | PROBE, PITOT STATIC PRESSURE - BELLMOUTH | 5 | |
| 856A1158 G04 | PT2/PS2 PROBE, PILOT STATIC PRESSURE - BELLMOUTH (BELLMOUTH PRESSURE PROBE) | 5 | |
| 856A1158G04 | Probe Bellmouth Pressure | 5 | |
| 856A1162G02 | DRIVER GUIDE STRIPS COMPRESSOR STATOR | 1 | |
| 856A1163P01 | Cover, Protector Aft End HP Compressor Rotor (cover) | 4 | |
| 856A1171 | FIXTURE, PRESS TEST NO 3 BRG AFT AIR/OIL SEAL | 1 | |
| 856A1171G03 | Fixture Pressure Test #3 Stationary | 1 | |
| 856A1171G05 | FIXTURE, PRESSURE TEST - SEAL, STATIONARY, NO. 3 BEARING AFT (PRESSURE TEST FIXTURE) | 1 | |
| 856A1171G06 | FIXTURE, PRESS TEST, #3 BRG AFT AIR/OIL SEAL | 2 | |
| 856A1174G02 | SENSOR,TEMPERATURE-COMPRESSOR DISCHARGE | 4 | |
| 856A1177G02 | Truck, Compressor Rotor/HPT Rotor and Balance Arbors | 6 | |
| 856A1185 | SENSOR, PRESS. PT54 | 1 | |
| 856A1185G01 | Sensor Pressure PT54 2 Per Eng. Test | 3 | |
| 856A1186 | SENSOR - TEMPERATURE & PRESSURE (TYPE K) | 1 | |
| 856A1186G03 | Sensor Temp Pressure | 3 | |
| 856A1186G04 | SENSOR TEMP PRESS P25/T25-C | 1 | |
| 856A1193G06 | FIXT PRESSURE VBV | 3 | |
| 856A1195G02 | FIXTURE ASSY - HIGHT PRESSURE COMPRESSOR | 4 | |
| 856A1204 | FIXTURE, REMOVAL HIGH PRESSURE COMPRESSOR ROTOR | 1 | |
| 856A1204G01 | FIXTURE, REMOVAL HIGH PRESSURE | 10 | |
| 856A1212 G01 | Fixture, Compressor Rotor Blade Length Gage | 1 | |
| 856A1212G02 | Fixture, Compressor | 1 | |
| 856A1212G08 | Compress Fixture | 1 | |
| 856A1212G09 | Compress Fixture | 1 | |
| 856A1212G10 | FIXTURE, COMPRESSOR ROTOR BLADE LENGTH GAGE | 1 | |
| 856A1212G11 | FIXTURE, COMPRESSOR ROTOR BLADE | 6 | |
| 856A1219 G01 | Heater, High Pressure Turb AFT Shaft | 1 | |
| 856A1219G01 | HEATER, HIGH PRESSURE TURB AFT SHAFT | 1 | |
| 856A1252G02 | FIXTURE, REMOVAL HIGH PRESSURE | 5 | |
| 856A1256G01 | GAGE SET, LINER DIAMETER - COMPRESSOR REAR STATOR CASE | 4 | |
| 856A1266 | PIN, ALINGMENT, HIGH PRESSURE COMPRESSOR CASE | 1 | |
| 856A1266G01 | PIN, ALINGMENT, HIGH PRESSURE COMPRESSOR CASE | 1 | |
| 856A1266G02 | PIN, ALINGMENT, HIGH PRESSURE COMPRESSOR CASE | 1 | |
| 856A1266G03 | Pins, Alignment - Compressor Cases (alignment pins) | 8 | |
| 856A1266G04 | PIN, ALIGNMENT - COMPRESSOR CASES | 7 | |
| 856A1266G05 | PIN, ALINGMENT, HIGH PRESSURE COMPRESSOR CASE | 1 | |
| 856A1266G06 | PINS, ALIGNMENT - COMPRESSOR CASES (ALIGNMENT PINS | 3 | |
| 856A1266G07 | PIN, ALIGNMENT - COMPRESSOR CA | 1 | |
| 856A1266P07 | PINS, ALIGNMENT - COMPRESSOR CASES (ALIGNMENT PINS) | 1 | |
| 856A1275G04 | GAGE,LENGTH COMPRESSOR ROTOR BLADES | 6 | |
| 856A1276G02 | Gage, Edge Thickness - Compressor Rotor Blades (edge gage thickness set) | 6 | |
| 856A1284 G01 | PULLER, PIN - HIGH PRESSURE TURBINE NOZZLE | 4 | |
| 856A1299G02 | FIXTURE, BLADE REMOVAL - HIGH PRESSURE TURBINE ROTOR (BLADE REMOVAL FIXTURE) | 2 | |
| 856A1329G01 | Sensor Press PT17 | 1 | |
| 856A1334G01 | FIXTURE, BUILDUP - CORE ENGINE/HP COMPRESSOR ROTOR (BUILDUP FIXTURE) | 1 | |
| 856A1334G02 | FIXTURE, BUILDUP - CORE ENGINE/HP COMPRESSOR ROTOR (BUILDUP FIXTURE) | 1 | |
| 856A1334G03 | Fixture, Buildup - Core Engine/HP Compressor Rotor (buildup fixture) | 9 | |
| 856A1334G04 | FIXTURE, BUILDUP - CORE ENGINE/HP COMPRESSOR ROTOR (BUILDUP FIXTURE) | 4 | |
| 856A1335 G02 | BRACKET SET, SUPPORT - HP COMPRESSOR | 1 | |
| 856A1344G02 | Fixture, Setup - Core Engine/HP Compressor Rotor Buildup | 7 | |
| 856A1354 | BRACKET SET, HANDLING - COMPRESSOR MID FLANGE (BRACKET SET) | 1 | |
| 856A1354 G02 | BRACKET SET, HANDLING - COMPRESSOR MID-FLANGE | 6 | |
| 856A1354G01 | BRACKET SET HANDLING ‐ COMPRESSOR MID FLANGE | 2 | |
| 856A1354G02 | BRACKET SET, HANDLING-COMPRESSOR MID FLANGE ( BRACKET SET) | 6 | |
| 856A1354IP07 | BRACKET SET, HANDLING-COMPRESSOR MID-FLANGE | 1 | |
| 856A1356G02 | FIXTURE, LIFT - COMPRESSOR ROTOR | 5 | |
| 856A1372G01 | GAGE ARM BOW HIGH PRESSURE TURBINE ROTOR FWD OUTER SEAL | 6 | |
| 856A1372G01 | GAGE, ARM BOW - HIGH PRESSURE TURBINE ROTOR FORWARD OUTER SEALEQUIVALENT | 6 | |
| 856A1373 | SENSOR PRESSIRE PT49.5 | 1 | |
| 856A1373G01 | Sensor Pressure PT49.5 For CFM56-2A & -3 | 2 | |
| 856A1385G02 | FIXTURE, LIFT - COMPRESSOR/LPT, HORIZONTAL (LIFT FIXTURE) | 3 | |
| 856A1387 | GAGE THICKNESS VANE SECTOR COMPRESSOR STATOR | 1 | |
| 856A1387G01 | GAGE THICKNESS VANE SECTOR COMPRESSOR STATOR | 3 | |
| 856A1387G02 | GAGE THICKNESS VANE SECTOR COMPRESSOR STATOR | 2 | |
| 856A1388G01 | GAGE SET, SEATING - IGB MODULE TO COMPRESSOR ROTOR SHAFT | 6 | |
| 856A1411G04 | FIXTURE RING COMPRESSION HPT | 4 | |
| 856A1414G02 | Arbour Bal High Pressure | 1 | |
| 856A1417 | FIXTURE LIFT AND TURN - HIGH PRESSURE TURB ROTOR DISK, FORWARD | 1 | |
| 856A1417G04 | FIXTURE LIFT AND TURN - HIGH PRESSURE TURB ROTOR DISK, FORWARD | 7 | |
| 856A1421 | FIXTURE, LIFT - HP COMPRESSOR CASE FRONT STATOR ASSEMBLY (LIFT FIXTURE) | 1 | |
| 856A1421 G01 | Fixture Lift ‐ HP Compressor Case Front Stator | 10 | |
| 856A1421G01 | FIXTURE LIFT ‐ HP COMPRESSOR CASE FRONT STATOR AS | 10 | |
| 856A1421G02 | FIXTURE, LIFT - HP COMPRESSOR STATOR CASE FRONt | 9 | |
| 856A1431G03 | FIIXTURE, RESTRAINING-HPT NOZZLE ASSEMB(THE RESTRAIN FIXTURE IS USED TO RESTRAIN THE NOZZLE SEGMENTS OF THE HP TURBINE NOZZLE ASSEMBLY CIRCUMFERENTIALLY DURING THE INSTALLATION OR REMOVAL FROM THE COMPRESSOR REAR FRAME (CRF) | 7 | |
| 856A1442G02 | FIXTURE, CHILL - HIGH PRESSURE TURBINE ROTOR AFT BLADE RETAINER | 1 | |
| 856A1463 | SENSOR PRESSURE | 1 | |
| 856A1463 (G01) | SENSOR, PRESSURE - PT54 | 6 | |
| 856A1463 G01 | SENSOR, PRESSURE - PT54 | 6 | |
| 856A1463G01 | SENSOR PRESSURE | 6 | |
| 856A1464G01 | SENSOR PRESSURE COMPR DISCHARGE | 2 | |
| 856A1466G04 | Sensor Pressure PT49.5 For CFM56-5A | 2 | |
| 856A1467 | ADAPTER PRESS CK FUEL MANIFOLD | 1 | |
| 856A1467 G01 | Pressur Check-Fuel Manifold Adapter | 7 | |
| 856A1467G01 | ADAPTOR PRESSURE CHECK | 7 | |
| 856A1467G02 | ADPT PRESS CHECK FUEL MANIFOLD | 1 | |
| 856A1475G03 | FIXTURE, DUMMY - HIGH PRESSURE TURBINE STATOR FORWARD (DUMMY FIXTURE) | 3 | |
| 856A1491 | BRACKET SET, HANDLING - COMPRESSOR MID FLANGE (BRACKET SET) | 1 | |
| 856A1491G01 | BRACKET SET, HANDLING - COMPRESSOR MID FLANGE | 3 | |
| 856A1491G02 | Handling Bracket Set - Compressor Mid flange | 12 | |
| 856A1491G03 | BRACKET SET, HANDLING - COMPRESSOR MID FLANGE (BRACKET SET) | 1 | |
| 856A1509P01 | COVER, PROTECTOR AFT END HP COMPRESSOR ROTOR (COVER) | 3 | |
| 856A1618G01 | SENSOR PRESS - P54 | 3 | |
| 856A1620 | SENSOR PRESSURE - PT 49.5 | 1 | |
| 856A1620 G01 | PT495 (LPT INLET PRESSURE) | 3 | |
| 856A1620G01 | SENSOR PRESS - P49.5 | 3 | |
| 856A1802G03 | FIXTURE, DUMMY - HIGH PRESSURE TURBINE STATOR FORWARD (DUMMY FIXTURE) | 1 | |
| 856A1809G01 | GAGE, CHORD LENGTH - COMPRESSOR ROTOR BLADES | 5 | |
| 856A1814G01 | Gage, Edge Thickness Compresspr | 8 | |
| 856A1816G01 | COMPRESSOR FRONT STATOR ASSEMBLY UPPER FRONT COMPRESSOR CASE REMOVAL | 9 | |
| 856A1820G01 | FIXTURE, SUPPORT - HP COMPRESSOR | 5 | |
| 856A1834 | RAKE,PRESSURE PT17 | 1 | |
| 856A1834 (G01) | RAKE, PRESSURE – PT17 | 3 | |
| 856A1834 G01 | RAKE PRESSURE - P.T. 17 (RAKE) | 3 | |
| 856A1834G01 | RAKE, PRESSURE - PT17 | 3 | |
| 856A1839 | FIXTURE, DISASSEMBLY - HPT/ HP COMPRESSOR ROTOR | 1 | |
| 856A1839G01 | FIXTURE, DISASSEMBLY-HPT/HP COMPRESSOR ROTOR | 8 | |
| 856A1845 | FIXTURE, ALIGNING - HIGH PRESSURE COMPRESSOR | 1 | |
| 856A1845G01 | FIXTURE, ALIGNING HIGH PRESSURE | 3 | |
| 856A1845G01 | FIXTURE, ALIGNING HIGH PRESSURE COMPRESSOR | 3 | |
| 856A1845G02 | FIXTURE, ALIGNING-HIGH PRESSURE COMPRESSOR | 3 | |
| 856A1845G03 | Fixture, Aligning - High Pressure Compressor | 5 | |
| 856A1885G01 | REMOVAL TOOL, VANE SECTOR - COMPRESSOR STATOR | 2 | |
| 856A1889 | HEATER, HIGH PRESSURE TURB AFT SHAFT | 1 | |
| 856A1889G01 | HEATER, HIGH PRESSURE TURB AFT SHAFT | 6 | |
| 856A2004 | TOOL, ASSEMBLY - INSTALL/REMOVE HPTR TO COMPRESSOR ROTOR NUTS | 1 | |
| 856A2004G01 | TOD, ASSEMBLY - LNSTALL/ RENIOVE HPTR TO COMPRESSOR ROTOR NUTS (ASSEMBLY TOOL) | 1 | |
| 856A2004G02 | Tool, Assembly - Install/Remove HPTR to Compressor Rotor Nuts (assembly tool) | 6 | |
| 856A2006G01 | COVER PRESSURE TEST FUEL MANIFOLD | 1 | |
| 856A2011G01 | Sensor Pressure PT17 | 2 | |
| 856A2213G01 | Pressure Check Manifold | 1 | |
| 856A2316G01 | LOW PRESSURE TURBINE COUPLING NUT TORQUE/LOOSEN WRENCH | 13 | |
| 856A2341G03 | FIXTURE, PULLER/PRESS - NO. 2 ROLLER BEARING OUTER RACE | 1 | |
| 856A2406G01 | Pressure Tool Inflatable Blds | 1 | |
| 856A2406G02 | TOOL: TOOL-PRESSURE INFLAT | 1 | |
| 856A2406G04 | TOOL-PRESSURE INFLAT | 1 | |
| 856A2568G01 | LOW PRESSURE TURBINE SHAFT AFT LIFTING EYE | 9 | |
| 856A2600G07 | LOW PRESSURE TURBINE SHAFT GUIDE & STOP TOOL | 11 | |
| 856A2611G01 | PULLER - LOW PRESSURE TURBINE | 9 | |
| 856A2613 | SENSOR, VIBRATION - FAN FRAME COMPRESSOR CASE VERTICAL (F.F.C.C.V.) ACCELEROMETER | 1 | |
| 856A2674 | LOW PRESSURE TURBINE SHAFT PROTECTOR COVER | 1 | |
| 856A2710G05 | LOW PRESSURE TURBINE MAJOR MODULE HANDLING FIXTURE | 7 | |
| 856A2713G07 | LOW PRESSURE TURBINE SHAFT TO LOW PRESSURE TURBINE MODULE BUILDUP FIXTURE | 8 | |
| 856A2714 | LOW PRESSURE TURBINE MODULE HOIST FIXTURE | 1 | |
| 856A2722G01 | TURBINE FRAME TO LOW PRESSURE TURBINE CASE GUIDE PINS | 6 | |
| 856A2729G03 | LOW PRESSURE TURBINE CASE BRACKETS | 1 | |
| 856A2731G02 | LOW PRESSURE TURBINE SHAFT TO LOW PRESSURE TURBINE MODULE SUPPORT SECTORS | 7 | |
| 856A2750G02 | ASSEMBLY/DISASSEMBLY FOR LOW PRESSURE TURBINE BLADES | 5 | |
| 856A2756 | LOW PRESSURE TURBINE SHAFT HEAT DIFFUSER (WITHOUT HEAT GUN) | 1 | |
| 856A2758G02 | LOW PRESSURE TURBINE SHAFT TO LOW PRESSURE TURBINE CENTERING FIXTURE | 6 | |
| 856A2773G01 | LOW PRESSURE TURBINE ROTOR/LOW PRESSURE TURBINE CASE SUPPORT SPACERS | 10 | |
| 856A2776G01 | TEST ADAPTOR PRESSUR | 4 | |
| 856A2808G03 | PRESSURE HEATING BLANKET - FAN | 1 | |
| 856A2808G04 | PRESSURE HEATING BLANKET - FAN | 1 | |
| 856A2828 | TOOL PRESSURE TEST | 1 | |
| 856A2828G01 | TOOL PRESSURE TEST | 1 | |
| 856A2948 | PRESSURE TOOL,INFLATION FAN BLADES (220V/50HZ) | 1 | |
| 856A2948G02 | PRESS TOOL INFL | 1 | |
| 856A2948G05 | PRESSURE HEATING BLANKET - FAN | 1 | |
| 856A2948G06 | PRESSURE HEATING BLANKET - FAN FRAME ABRADABLE LINER | 1 | |
| 856A2966G01 | PRESS TOOL SET MAJOR MODULE SEAL | 4 | |
| 856A3279G03 | LOW PRESSURE TURBINE DISK INSTALLATION/REMOVAL SLEEVES | 7 | |
| 856A3470 | SENSOR, PRESSURE - PT49.5 (PRESSURE SENSOR) | 1 | |
| 856A3470G01 | Pressure Sensor PT49.5 | 1 | |
| 856A3485 | LOW PRESSURE TURBINE SHAFT THREADED PROTECTIVE CAP | 1 | |
| 856A3488G01 | LOW PRESSURE TURBINE SHAFT SUPPORT HOLDING FIXTURE | 4 | |
| 856A3501G04 | ALIGNMENT/GUIDE BOOSTER/LOW PRESSURE TURBINE SHAFT | 14 | |
| 856A3504 | LOW PRESSURE TURBINE MODULE PUSH/PULL FIXTURE | 1 | |
| 856A3524G01 | BOOSTER & LOW PRESSURE TURBINE DRIVE ADAPTER TOOL SET | 14 | |
| 856A3594G02 | PRESSURE GAUGE TOOLSET LEAK AGB | 4 | |
| 856A3627 | ADAPTER PRESSURE TEST-FUEL MANIFOLD | 1 | |
| 856A3627 REV A | ADAPTER PRESSURE TEST-FUEL MANIFOLD | 1 | |
| 856A3627G01 | ADAPTER PRESSURE TEST | 8 | |
| 856A3630 | PRESSURE TOOL INFLATABLE FAN BLADES INNER PATCH (220V) | 1 | |
| 856A3630G01 | Pressure Tool | 1 | |
| 856A3630G02 | PRESSURE HEATING BLANKET - FAN FRAME ABRADABLE LINER | 1 | |
| 856A3630G03 | PRESSURE HEATING BLANKET - FAN FRAME ABRADABLE LINER | 1 | |
| 856A3630G04 | PRESSURE HEATING BLANKET - FAN FRAME ABRADABLE LINER | 1 | |
| 856A3633G01 | TOOL PRESSURE TEST | 1 | |
| 856A3750G02 | LOW PRESSURE TURBINE SHAFT MODULE CENTERING FIXTURE | 13 | |
| 856A3767G02 | LIFT/TURN LOW PRESSURE TURBINE MODULE | 4 | |
| 856A3790G01 | LOW PRESSURE TURBINE REAR VENT TUBE FIXTURE | 7 | |
| 856A3793 | LOW PRESSURE TURBINE CENTER VENT TUBE FIXTURE | 3 | |
| 856A3795G02 | LOW PRESSURE TURBINE MODULE MOBILE STAND | 6 | |
| 856A3908G02 | PULLER STAGE 1 LOW PRESSURE TURBINE NOZZLE STATIONARY OUTER AIR SEAL | 8 | |
| 856A3918 | FIXTURE, PULLER / PRESS NO 2 ROLLER BEARING OUTER RACE | 1 | |
| 856A3918G01 | FIXTURE, PULLER / PRESS NO 2 ROLLER BEARING OUTER RACE | 1 | |
| 856A3918G02 | FIXTURE, PULLER / PRESS NO 2 ROLLER BEARING OUTER RACE | 2 | |
| 856A3918G03 | Fixture, Puller/Press - No. 2 Roller Bearing Outer Race (puller/press fixture) | 4 | |
| 856A3942 | TOOL PRESSURE TEST | 1 | |
| 856A4002G01 | PRESSURE CHECK KIT | 2 | |
| 856A4028G02 | FIXTURE MACHINING COMPRESSOR ROTOR AIR DUCT | 1 | |
| 856A4044G01 | FIXTURE MACHINING COMPRESSOR ROTOR SPOOL, STAGE4 THRU STAGE 9 | 1 | |
| 856A4046G02 | FIXTURE MACHINING COMPRESSOR ROTOR SHAFT | 1 | |
| 856A4055 G10, G11 & G12 | BLADE TIP GRINDER-HP COMPRESSOR ROTOR, STA GE 1-9 | 1 | |
| 856A4055 G15 | THE GRINDER IS USED TO GRIND THE BLADE TIPS OF INDIVIDUAL COMPRESSOR BLADES. | 2 | |
| 856A4055G01 | GRINDER, BLADE TIP - HP COMPRESSOR ROTOR, STAGES 1-9 (BLADE TIP GRINDER) | 1 | |
| 856A4055G10 | BLADE TIP GRINDER-HP COMPRESSOR ROTOR, STA GE 1-9 | 4 | |
| 856A4055G12 | GRINDER, BLADE TIP - HP COMPRESSOR ROTOR, STAGES 1-9 (BLADE TIP GRINDER) | 9 | |
| 856A4055G13 | GRINDER, BLADE TIP - HP COMPRESSOR ROTOR, STAGE 1- | 2 | |
| 856A4055G14 | GRINDER, BLADE TIP - HP COMPRESSOR ROTOR, STAGES 1-9 (BLADE TIP GRINDER) | 2 | |
| 856A4055G15 | BLADE TIP GRINDER-HP COMPRESSOR ROTOR | 2 | |
| 856A4055G16 | BLADE TIP GRINDER-HP COMPRESSOR ROTOR, STA GE 1-9 | 2 | |
| 856A4110G01 | SHIELD, WATER FLOW-BLADE, HIGH PRESSURE TURBINE ROTOR | 1 | |
| 856A4192G01 | GAGE, MID-CHORD LENGTH COMPRESSOR ROTOR BLADE | 2 | |
| 856A4325G01 | TOOL, GRINDING - COMPRESSOR STATOR CASE (FLEXIBLE | 1 | |
| 856A4627G03 | TOOL - INSPECTION, PRESSURE FACES, DOVETAIL, FAN DISK, INCH UNITS | 5 | |
| 856A4628G01 | tool inspection, pressure faces, dovtail, fan | 9 | |
| 856A4628G02 | TOOL- INSPECTION, PRESSURE FACES, DOVETAIL, FAN BLADE, MISSING COATING, MM UNITS | 8 | |
| 856A4633G02 | PRESSURE FACE GAGE - FAN DISK | 13 | |
| 856A4638G01 | AGE BUCKLING CHECK LOW PRESSURE TURBINE BLADES, STAGES 1 THRU 4 | 1 | |
| 856A5688G01 | INFLATABLE PRESSURE SET - FAN FRAME ABRADABLE LINER | 1 | |
| 856A5809 | INFLATABLE PRESSURE FIXTURE - FAN FRAME ABRADABLE LINER | 1 | |
| 856A5944 | LOW PRESSURE TURBINE SHAFT ALIGNMENT FIXTURE | 1 | |
| 856A5945 | LOW PRESSURE TURBINE POSITION GAUGE MASTER | 1 | |
| 856A6623 | INFLATABLE PRESSURE FIXTURE - FAN FRAME ABRADABLE LINER | 1 | |
| 856A6629G02 | FAN DISK PRESSURE GAUGE | 3 | |
| 856A6629GO2 | FAN DISK PRESSURE FACE WEAR GAUGE | 3 | |
| 856A6634G01 | ULTRASONIC INSPECTION TOOL FAN DISK PRESSURE FAEC DOVETAILS | 1 | |
| 856A6762 | PRESSURE TOOL INFLATABLE - FAN BLADES ADRADABLE LINER | 1 | |
| 856A6762G01 | PRESSURE TOOL INFLATABLE - FAN BLADES ABRADABLE LINER | 1 | |
| 856A6762G02 | PRESSURE TOOL INFLATABLE - FAN BLADES ABRADABLE LINER | 1 | |
| 856A6762G03 | PRESSURE TOOL INFLATABLE - FAN BLADES ABRADABLE LINER | 1 | |
| 856AI02I | FIXTURE, LIFT & TURN - COMPRESSOR ROTOR ASSY | 1 | |
| 856AI05I | PULLER, ARM - COMPRESSOR STATOR ACTUATION | 1 | |
| 856AI072 | TRUCK COMPRESSOR | 1 | |
| 856AI0I6 | STAND COMPRESSOR ROTOR | 1 | |
| 856AIII5 | CART, NITROGEN-FUEL MAN. PRESS CHECK | 1 | |
| 85710001-001-141 | PRESSURE TEST RIG | 1 | |
| 86-4101-1 | ADAPTER, PRESSURE OILER, 1/2 | 1 | |
| 86-4102-2 | PRESSURE COVER | 2 | |
| 8600A | VALVE AUTOMATIC PRESSURE | 2 | |
| 860PSI | PRESSURE GAUGE TOOL | 1 | |
| 8620-1 | PRESSURE SWITCH | 4 | |
| 865956-6 | SWITCH-BETA PRESSURE | 1 | |
| 865956-6/-7 | SWITCH-BETA PRESSURE | 1 | |
| 865956-7 | SWITCH-BETA PRESSURE | 1 | |
| 865A1115 | MANIFOLD PRESSURE CHECK TOOL | 1 | |
| 87-2500A | HIGH PRESSURE REGULATOR | 1 | |
| 8700 | OXYGEN ULTRA HIGH DELIVERY PRESSURE REGULATOR 4000PSI | 11 | |
| 8700-2500-580 | PRESSURE REGULATOR | 1 | |
| 871-12-B4 | COMPRESSION SLEEVE | 1 | |
| 871044-10 | ADAPTER - LOAD TEST, PRESSURE RELIEF DOOR LATCH | 1 | |
| 871044-28 | ADAPTER - LOAD TEST, PRESSURE RELIEF DOOR LATCH | 1 | |
| 87202126 VIS | GENERATOR - PRESSURE, PITOT STATIC TEST | 1 | |
| 87202126V15 | GENERATOR - GROUND PRESSURE | 1 | |
| 87202130V02 | PRESSURE GENERATOR | 1 | |
| 873144K | PRESSURE GAUGE, 3000PSI, A320 WING T | 1 | |
| 873144K | PRESSURE GAUGE, 3000PSI, A320 WING T | 1 | |
| 8755K2 | PRESSED WOOL FELT 1/8 THICK/60"WTH PRICE PER FT | 1 | |
| 876-220 | PRESS-N-SNAP W/DIE SETTING | 1 | |
| 97 | ARBOR PRESS TWO TON | 1 | |
| 914.00 | Bombardier Global Express NOSE JACK | 1 | |
| 916.00 | Bombardier Global Express WING/MAIN JACK | 1 | |
| 966 | PISTON, PRESSURE | 5 | |
| 8774 | Low Press L/G Strut Service Cart Com 3834 | 1 | |
| 8784B-TSHR | LOW PRESSURE HOSE REEL FOR PART # 8784B | 1 | |
| 879-6948 | PRESSURE GAUGE | 1 | |
| 88-100 | TRANSMITTER ASSY, PRESSURE Â | 4 | |
| 881-8-268-000 | PRESS TOOL | 1 | |
| 881600AT2 | ASSEMBLY TOOL, PRESSURE SEAT | 1 | |
| 8819-681-000 | SET OF WRENCHES FOR AXIAL COMPRESSOR ASSEMBLY | 2 | |
| 88362-000 | PRESSURE ROLLER ALIGNMENT TOOL | 1 | |
| 8844 | PRESSURE GAUGE | 9 | |
| 8844-B | TIRE PRESSURE GAUGE | 6 | |
| 884400A-1 | SERVICE CART - LOW PRESSURE | 2 | |
| 884400B-1 | GAUGE: AIR PRESSURE,TIRE, | 2 | |
| 8844B | TIRE & PRESSURE GAUGE OAL=18" PSI=0-400 | 6 | |
| 884FG | PRESSURE TEST ADAPTER | 2 | |
| 88550-8 | AXLE JACK 95P10AR 95 TON - LOW PRESSURE PUMP | 1 | |
| 885500-16 | AXLE JACK 95P10AR 95 TON - HIGH PRESSURE PUMP | 2 | |
| 886-2 | SOUND PRESSURE LEVEL CALIBRATOR | 8 | |
| 8874 | GAUGE: TIRE & STRUT PRESSURE, | 4 | |
| 8875 | GAUGE: TIRE & STRUT PRESSURE, | 3 | |
| 8876 | HIGH PRESSURE AIR GAUGE | 4 | |
| 8885 | Dill Air Controls 8885 Commercial Aircraft (0-200 PSI) Tire Pressure Gauge | 1 | |
| 8921 | CHUCK: GAUGE,AIR PRESSURE, | 4 | |
| 8927 | CHUCK: GAUGE,AIR PRESSURE, | 4 | |
| 9043 | Dill Air Controls 9043 Standard Bore High Pressure Strut Coupler - .375-24 Hose Connector - 3,000 PSIG | 3 | |
| 9061 | VALVE: AIR PRESSURE, SAFETY RELIEF | 4 | |
| 9400 | TRANSDUCER,PRESSURE, FOR 9022 MODULE 150 PSIG | 1 | |
| 9565 | VELOCICALC VENTILATION METER WITH DIFFERENTIAL PRESSURE SENSOR | 2 | |
| 9675 | DIGITAL PRESSURE GAG | 1 | |
| 10012 | BRAKE PRESSURE TEST | 1 | |
| 10072 | PRESSURE GAUGE | 1 | |
| 10282 | TEST REGULATOR (SELF-VENTING TYPE) 5 - 300 PSIG (0.03 - 2.07 MPA)OUTLET PRESSURE | 1 | |
| 10483 | HIGH PRESSURE FLUID DISPENSER | 1 | |
| 10843 | PRESSURE GAUGE 0-60 PSI | 1 | |
| 11068.1 | PISTON RING COMPRESSOR SIZE 1 | 1 | |
| 11094 | NITROGEN SUPPLY WITH PRESSURE REGULATOR AND SHUT-OFF VALVE | 1 | |
| 11732 | 12 TON PRESS HEX INSTALLING DIE - USE WITH CATALOG NUMBER 13400 - DIE CODE 21 - COPPER CODE #8 AWG - | 6 | |
| 11831 | TOOL: AIR PRESSURE | 1 | |
| 12228 | COMPRESSION SPRING | 1 | |
| 12890 | CALIBRATOR, LEVEL SOUND PRESSURE( | 5 | |
| 14002 | GAUGE: PRESSURE,OIL, | 2 | |
| 15793 | PRESSURE SWITCH | 1 | |
| 16988 | GAUGE, PRESSURE | 3 | |
| 20005 | PRESSURE HEAD | 1 | |
| 20293 | ADAPTER- PRESSURE HEAD | 1 | |
| 20294 | ADAPTOR, PRESS. HEAD | 1 | |
| 20469 | ENGINE CLEANING TRUCK PRESSURE GAUGE | 1 | |
| 21482 | ARBOR PRESS | 1 | |
| 23660 | TIRE PRESS BLEED TOOL SMALL | 1 | |
| 23661 | TIRE PRESS BLEED TOOL BIG | 1 | |
| 23878 | PRESSURE GAGE 0-85 PSI | 1 | |
| 25164 | PRESSURE GAUGE TOOL | 1 | |
| 25400 | PRESSURE GAUGE | 1 | |
| 30056 | Grease gun - low pressure | 1 | |
| 30059 | COMPRESSOR STUBSHAFT FIXTURE | 1 | |
| 31240.0121 | Element - Filter Pressure | 1 | |
| 32447 | DIP STICK (SD-5 AIR COND. COMPRESSOR TOOL) | 3 | |
| 32448 | ANGLE GAUGE (SD-5 AIR COND. COMPRESSOR TOOL) (MODEL 300) | 1 | |
| 32455 | COMPRESSOR STAND | 1 | |
| 33118 | ADAPTER FOR PITOT PRESSURE PROBE | 1 | |
| 36023 | BOTTLE - NITROGEN CART - SERVICING, STRUT OIL INFLATOR - STRUT, LANDING GEAR GAUGE - PRESSURE, 0-3000 PSIG (0-20685 KPA) WRENCH - TORQUE BUCKET - 2.5 GALLON CAPACITY | 1 | |
| 45216 | TE Connectivity 45216 Compressing Tool, Splice Sleeve - 18-16 AWG | 7 | |
| 45770 | PRESSURE TEST CLAMP | 1 | |
| 48513 | PRESSURE GAUGE | 1 | |
| 50231 | HIGH PRESSURE REGULATOR - 50 BAR | 1 | |
| 50233 | HIGH PRESSURE REGULATOR - 150 BAR | 1 | |
| 50618 | COMPRESSOR ROTOR HOLDER | 1 | |
| 51021 | COMPRESSOR ROTO BALANCING SHIM | 1 | |
| 51025 | COMPRESSOR SLEEVE PROTECTOR | 1 | |
| 53693 | INDICATOR-ENGINE PRESSURE RATIO | 1 | |
| 54500 | WINDOW-PRESSURIZATION | 1 | |
| 59030 | HYDRAULIC PRESSURE BLEEDING EQUIPMENT | 1 | |
| 61001 | TRANSMITTER,LOW DUCT PRESSURE | 1 | |
| 64559 | COMPRESSOR RING | 1 | |
| 64712 | COMPRESSOR, PISTON RING | 1 | |
| 64906 | PLUG, BEARING, HIGH COMPRESSION CRANKCASE ADQUIRIR | 1 | |
| 67844 | PRESSURISING ADAPTOR | 1 | |
| 70278 | COMPRESSOR ROTOR BALANCE WEIGHT PUNCH | 1 | |
| 70376 | PRESSURE TEST FIXTURE | 1 | |
| 71314 | BALANCING HYDRAULIC PRESS | 1 | |
| 71378 | COMPRESSOR | 1 | |
| 71776 | COMPRESSOR ROTOR HOLDING FIXTURE | 1 | |
| 71875 | PRESSURE GAUGE 0-4000PSI | 1 | |
| 72107 | COMPRESSOR TURBINE GRINDING FIXTURE | 1 | |
| 77185 | PRESSIOMETRE | 1 | |
| 83250 | PRESSURE GAUGE LIQUID FILLED 0-6000 PSI | 1 | |
| 89956 | COMPRESSOR ROTOR RIVET PUSHER | 1 | |
| 90018 | PRESSURE SWITCH | 3 | |
| 90683 | Intensifier − Pneumatic Pressure (Optional) | 1 | |
| 90739 | PNEUMATIC PRESSURE INTENSIFIER | 1 | |
| 94888 | TOOL - COMPRESSION | 1 | |
| 96824 | PRESSE ETOUPE | 1 | |
| 100004 | ULTRA SONIC CLEANER / CHECK RAT CHECKOUT MODULE CASE DRAIN AND PRESSURE FILTERS | 1 | |
| 100547 | GAUGE, PRESSURE PANEL | 1 | |
| 101040 | GAUGE PRESSURE 0-1400KPA 1IN NPT BOTTOM CONNECTION MODEL 233.30.100 WIKA 68146043 | 1 | |
| 101052 | Housing Comp. Pressure Test Kit | 1 | |
| 102833 | GAUGE , PRESSURE, 0-6000 PSI, 1/4" BTM, 2-1/2" FACE, LIQUID FILLED, STAINLESS STEEL | 1 | |
| 105000 | TYRE PRESSURE GAUGE | 1 | |
| 108190 | AIR PRESSURE GUAGE | 1 | |
| 115110 | Connecting piece wpressure gauge and shut off vlv | 1 | |
| 123814 | COMPRESSOR BYPASS VALVE | 5 | |
| 129152 | PRESSURE SENSOR | 1 | |
| 132252 | PRESSURE GAUGE | 1 | |
| 140034 | ROTOR BRAKE SPRING COMPRESSION KIT | 1 | |
| 140125 | SPRING COMPRESSION TOOL FORK ASSEMBLY | 1 | |
| 144881 | PRESS PAD | 1 | |
| 145737 | MAC-20 (Mini Air Compressor) | 1 | |
| 145822 | MAC-20 (Mini Air Compressor - 220V) | 1 | |
| 151142 | Ball Bearing Disassembly Press | 1 | |
| 151243 | WHEEL PRESSURE INFLATOR | 1 | |
| 156299 | TESTER: COMPRESSED AIR,W/BAG, COMPRESSED AIR TESTER W/BAG | 1 | |
| 162520 | BENCH DRILL PRESS | 2 | |
| 171051 | PRESSURE GAUGE | 1 | |
| 187874 | PRESSURE GAUGE | 1 | |
| 190072 | LATCH: COMPRESSION, | 2 | |
| 200603 | PRESSURE GUAGE | 1 | |
| 210890 | COMPRESSOR | 1 | |
| 214697 | HIGH PRESSURE AIRLESS HOSE GRACO BLUE MAXTM (INTERNAL DIAMETER-4.8MM6.35MM; LENGTH-15M) | 1 | |
| 214698 | HIGH PRESSURE AIRLESS HOSE GRACO BLUE MAXTM (INTERNAL DIAMETER-4.8MM6.35MM; LENGTH-7,6M) | 1 | |
| 215849 | Pressure Test Plug | 1 | |
| 216692 | Pressure Test Plate | 2 | |
| 216718 | PRESSURE TEST PLATE AND PLUG | 1 | |
| 216719 | PRESSURE TEST PLATE AND PLUG | 1 | |
| 216720 | PRESSURE TEST PLATE AND PLUG | 1 | |
| 216746 | PRESSURE TEST PLATE AND PLUG | 1 | |
| 221162 | PRC HIGH PRESSSURE INJECTION GUN 507-A | 3 | |
| 225206 | PRESSURE SWITCH | 1 | |
| 229340 | 285-A PORTABLE ELECTRIC SEMKIT SEMI-AUTO PACKAGE MIXER ( PRESSURE: 115 VAC ) | 4 | |
| 229704 | TYRE PRESSURE GAUGE | 1 | |
| 230086 | PRESSURE GAUAGE | 1 | |
| 234414 | PPG Semco 234414 Clear Plastic Low Density Pressure Relief Plunger | 1 | |
| 234535 | 285-A PORTABLE ELECTRIC SEMKIT SEMI-AUTO PACKAGE MIXER ( PRESSURE: 230V / 50 HZ ) | 2 | |
| 250564 | Compressor | 1 | |
| 253800 | CABIN PRESSURE CONTROLLER TEST SET | 1 | |
| 253830 | Bearing Press Holder | 1 | |
| 256068 | PRESSURE TEST PLUB | 3 | |
| 270184 | PRESSING AND BROACHING ARBOR | 1 | |
| 278392 | BEARING PRESS FIXTURE | 1 | |
| 280987 | HOLDER - SHAFT PRESSING | 1 | |
| 280988 | HOLDER - BEARING PRESSING | 1 | |
| 280989 | HOLDER - SHUTTLE PRESSING | 1 | |
| 280990 | HOLDER - SHAFT PRESSING | 1 | |
| 281176 | HOLDER - BEARING PRESSING | 1 | |
| 281178 | HOLDER - BEARING PRESSING | 1 | |
| 282645 | PRESSURE GAGE | 7 | |
| 283154 | TESTER, PRESSURE LINE | 1 | |
| 289358 | COMPRESSORASSEMBLY | 1 | |
| 290212 | AIR PRESSURE REGULATOR | 1 | |
| 290435 | OVER PRESS VALVE ADP TOOL | 1 | |
| 296609 | ADAPTER METERED PRESSURE | 1 | |
| 296822 | FIXTURE ASSY, PRESSURE TEST-ANTI ICE | 1 | |
| 300066 | GAGE L/G STRUT SERVICING HIGH PRESS | 1 | |
| 312064 | TYRE PRESSURE GAUGE | 1 | |
| 0316002 | HI-PRESS MUFFLER | 1 | |
| 329452 | TYRE PRESSURE ADJUSTMENT TROLLEY | 1 | |
| 345678 | HYDRAULIC PRESSURE TESTER | 1 | |
| 382501 | PRESSURE GAUGE | 1 | |
| 389527 | HAND PRESS SNAP FASTENER | 1 | |
| 404184 | BRAKE PRESSURE GAUGE | 1 | |
| 407529 | PRESS TO TEST KNOB | 1 | |
| 413324 | AIR PRESS REG | 1 | |
| 422745 | OVERPRESSURE CAPSULE ADJUSTMENT WRENCH | 1 | |
| 432316 | SPRING,HELICAL,COMPRESSION | 1 | |
| 446202 | SWITCH PRESSURE | 1 | |
| 446216 | PRESSURE TEST PLUG | 5 | |
| 463100 | PRESSURE GAUGE 0-4 BAR; 1.6 | 1 | |
| 473017 | RING COMPRESSOR | 1 | |
| 473036 | REPLACEMENT GAUGE TOOL NO. 473036 THIS PUMP CONTAINS A PNEUMATIC FOOT OPERATED HYDRAULIC PUMP, PRESSURE GAUGES, SUPPLY AIR OILER, PRESSURE REGULATOR AND HYDRAULIC HOSES. | 1 | |
| 0000500550 | COMPRESSION SPRING | 1 | |
| 0000500590 | COMPRESSION SPRING | 1 | |
| 501087 | Adapter, Arbor Press Ram | 1 | |
| 501118 | Compressor Discharge | 1 | |
| 501131 | Mold – Accessory Housing Pressure Test Plug | 1 | |
| 501305 | Locating Plate for Arbor Press | 1 | |
| 502669 | PRESSURE SWITCH ASSEMBLY TOOL | 1 | |
| 0000508200 | COMPRESSION SPRING | 1 | |
| 529046 | PRESSURE GAUGE 0-16 BAR; 2.5 | 1 | |
| 539619 | SPRING OIL PRESSUR | 1 | |
| 575191 | TOOL, PRESSURE ADJUSTMENT | 1 | |
| 600013 | PRESSURE GAUGE KIT | 1 | |
| 637083 | SPRING OIL PRESSURE REL VLV | 1 | |
| 679513 | COMPRESSOR REVERSE TORQUE SPRING | 1 | |
| 679807 | COMPRESSOR -LUBE OIL FILTER POPPET VALVE | 1 | |
| 690411 | BLEED AIR SYSTEM PRESSURE AND LEAK CHECK TEST FIXTURE TOOL | 1 | |
| 711409 | GAUGE - DIFFERENTIAL PRESSURE | 1 | |
| 714810 | PRESSURE DUMP VALVE | 1 | |
| 717001 | PLATE, PRESSURE TEST CAPPING | 2 | |
| 723520 | PRESSURE GAUGE 0-5000PSI | 1 | |
| 739459 | PRESSURE TEST FIXTURE | 1 | |
| 747540 | SCAVENGE PRESSURE SWITCH PLUG | 1 | |
| 780016 | HAND PRESS INSTALLATION BEARINGS | 1 | |
| 809186 | PRESSURE GAUGE (0-4000 PSI) | 1 | |
| 0000817012 | PRESSURE REGULATOR 1/4" | 1 | |
| 820729 | ARBOR PRESS FIXTURE | 1 | |
| 833180 | FIXTURE PIN PRESS | 1 | |
| 833834 | TESTER - CABIN PRESSURIZATION (SPL-907) | 1 | |
| 834728 | Adapter, Lifting Engine Compressor Module | 1 | |
| 834737 | Adapter Press | 1 | |
| 835283 | Test Set-Press Plug | 1 | |
| 864721 | Adapter, Lifting, Load Compressor | 1 | |
| 874234 | FUEL PRESSURE GAUGE FOR MEASURING FUEL PRESSURE | 1 | |
| 876766 | PRESSURE SWITCH REMOVAL TOOL | 1 | |
| 876885 | MOUNTING YOKE TO COMPRESS DOG GEAR | 1 | |
| 877190 | PRESS-IN TOOL | 1 | |
| 877320 | PRESS-IN RING FOR BALL BEARING 35-72-17 , PROPELLER SHAFT HANDLE WITH PART NO : 876518 | 1 | |
| 877590 | PRESS-IN MUSHROOM | 1 | |
| 877594 | PRESS-IN JIG FOR ROLLER BEARING 25*52*15 AND OIL SEAL 30*52*7 , FOR F2 | 1 | |
| 877595 | PRESS-IN MUSHROOM | 1 | |
| 877597 | PRESS-IN MUSHROOM | 1 | |
| 877600 | PRESS OUT MUSHROOM FOR PROPELLER SHAFT F3 | 1 | |
| 877605 | PRESS OUT MUSHROOM FOR PROPELLER SHAFT F2 | 1 | |
| 891240 | PRESSURE GAUGE 0-300 PSI TOOL | 1 | |
| 900042 | BACK PRESSURE CYLINDER ADAPTOR | 1 | |
| 901957 | PRESSING AND STAKING HOLDER ADAPTER | 1 | |
| 906055 | PRESSING TOOL | 1 | |
| 906056 | PRESSING TOOL | 1 | |
| 906073 | PRESSING MANDREL | 1 | |
| 909250 | HYDRAULIC PRESS - 920003-06 | 1 | |
| 950024 | TRAILER, COMPRESSED GAS CYLINDER | 1 | |
| 970507 | RELIEF PRESSURE TEST TOOL | 1 | |
| 970613 | ARBOR PRESS FIXTURE | 1 | |
| 977200 | SMALL DRILL PRESS | 1 | |
| 980400 | DUAL RANGE TIRE PRESSURE GAUGE | 1 | |
| 00986850 | 1#SPRING COMPRESSOR | 1 | |
| 997542 | EXTERNAL PRESSURE GAUGE PORT PLUG | 1 | |
| 998210 | HARNESS, CABIN ESPRESSO MAKER TEST | 1 | |
| 998423 | PRESSURE TEST HOSE RATED MIN 450PSI | 1 | |
| 998628 | PRESSURE SYSTEM FOR MORE THAN 450PSI | 1 | |
| 998965 | POWER SUPPLY FOR SOLENOID DURING PRESSURE TEST | 1 | |
| 999058 | OVER PRESSURE VALVE TEST PLUG | 1 | |
| 999059 | PRESSURE TEST BREW SYSTEM CONNECTOR | 1 | |
| 999060 | PRESSURE TEST FROTH SYSTEM CONNECTOR | 1 | |
| 999061 | PRESSURE TEST MAIN HEATER BLOCK PLUG | 1 | |
| 999361 | PRESSURE TEST MAIN HEATER BLOCK PLUG | 1 | |
| 999510 | Air Pressure Regulator | 1 | |
| 999760 | ESPRESSO/NESPRESSO HEATER RTD | 1 | |
| 1005000 | PRESSURE GAUGE CONNECT 350 BAR | 1 | |
| 1005101 | CONNECTOR PRESSURE | 2 | |
| 1009788 | COMPRESSOR OIL | 1 | |
| 1014758 | HIGH PRESSURE ENGINE WASH | 1 | |
| 1014826 | ADAPTER CYCLEAN WASH THIS TOOL IS USED TO CLEAN THE IP AND THE HP COMPRESSORS | 1 | |
| 1014954 | Hybrid Shroud Pressurization Kit | 1 | |
| 1018225 | Low Pressure 3-way Valve | 1 | |
| 1019567 | 2 X 125 LTR. MULTI-ENGINE COMPRESSOR WASH RIG | 1 | |
| 1022281 | FUEL FILTER DELTA PRESSURE SENSOR (FFDP) | 1 | |
| 1024619 | HPC BLEED PRESSURE SENSOR | 1 | |
| 1106469 | PRESSURE SEAL INSTALLATION/ REMOVAL FIXTURE | 1 | |
| 1109534 | SCROLL COMPRESSOR (DANFOSS) | 1 | |
| 1349854 | COMPRESSION TOOL KIT | 1 | |
| 1900070 | SPRING COMPRESSOR | 1 | |
| 1900135 | SEAL COMPRESSORS | 1 | |
| 1900194 | SPRING COMPRESSOR | 1 | |
| 1900488 | COMPRESSION CLAMP | 1 | |
| 1900550 | CYLINDER BLOCK SPRING COMPRESSOR | 1 | |
| 1900575 | COMPRESSION TOOL | 1 | |
| 1900577 | COMPRESSION TOOL | 1 | |
| 1900709 | SPEEDWHEEL PRESS SLEEVE | 1 | |
| 1900710 | FAN PRESS SLEEVE | 1 | |
| 1900746 | COMPRESSION TOOL | 1 | |
| 1900810 | HIGH PRESSURE (LARGE) PINTLE BEARING REMOVAL | 1 | |
| 1900811 | LOW PRESSURE (SMALL) PINTLE BEARING REMOVAL | 1 | |
| 1900852 | CLUTCH COMPRESSION TOOL | 1 | |
| 2000042 | TB1 aluminum towbar with shock-absorbing hitch and limited tow-eye rotation. 60,000 lb. (27,215 kg) capacity. Compatible with all AERO heads (EXCEPT Regional-3R, G500 & Global Express Heads). Also compatible with Tronair and other manufacturer's systems. | 2 | |
| 2000134 | PROOF PRESSURE FIXTURE | 1 | |
| 2000353 | CGE towbar head for Bombardier Global Express XRS, 5000 & 6000 aircraft. Designed with w/radial & linear shear protection to protect nose gear. Compatible towbar(s): TB3, TB125. | 1 | |
| 2000870 | 2-Bottle hand-movable aircraft nitrogen service cart with low and high pressure regulator system (includes regulator mounting bracket). | 1 | |
| 2000872 | 2-Bottle hand-movable aircraft oxygen service cart with high pressure regulator system. | 1 | |
| 2000930 | 2-Bottle nitrogen low/high pressure regulator system. 2 Bottle low/high regulator with (2) 15' (457.2 cm) delivery hoses. | 1 | |
| 2000935 | 2-Bottle high pressure nitrogen regulator system. 15' (457.2 cm) delivery hose, AERO part number 05-001 inflating valve adapter, manual, and calibration certificates. | 1 | |
| 2000936 | 2-Bottle low pressure nitrogen regulator system. 15' (457.2 cm) delivery hose, AERO part number 05-001 inflating valve adapter, manual, and calibration certificates. | 1 | |
| 2000942 | 3-Bottle nitrogen low/high pressure regulator system. 3 Bottle low/high regulator with (2) 15' (457.2 cm) delivery hoses. | 1 | |
| 2000947 | 1-Bottle nitrogen low/high pressure regulator system. 1-Bottle low and 1-bottle high nitrogen regulator with (2) 15' (457.2 cm) delivery hoses. | 1 | |
| 2000948 | 1-Bottle low pressure nitrogen regulator system. 15' (457.2 cm) delivery hose, AERO part number 05-001 inflating valve adapter, manual, and calibration certificates. | 1 | |
| 2000950 | 4-Bottle nitrogen low/high pressure regulator system. 4 Bottle low/high regulator with (2) 15' (457.2 cm) delivery hoses. | 1 | |
| 2001000 | HIGH PRESSURE 1000MM | 1 | |
| 2001041 | Towbar Trolley for GA & Corporate Aircraft, complete kit including rolling/portable organizer trailer, complete set of towbars and heads to fit all aircraft from smallest single engine to G650 & Global Express airframes, towable caster mounted trailer. T | 1 | |
| 2001120 | 1-Bottle high pressure nitrogen regulator system. 15' (457.2 cm) delivery hose, AERO part number 05-001 inflating valve adapter, manual, and calibration certificates. | 1 | |
| 2001121 | 3-Bottle high pressure nitrogen regulator system. 15' (457.2 cm) delivery hose, AERO part number 05-001 inflating valve adapter, manual, and calibration certificates. | 1 | |
| 2001122 | 3-Bottle low pressure nitrogen regulator system. 15' (457.2 cm) delivery hose, AERO part number 05-001 inflating valve adapter, manual, and calibration certificates. | 1 | |
| 2001123 | 4-Bottle high pressure nitrogen regulator system. 15' (457.2 cm) delivery hose, AERO part number 05-001 inflating valve adapter, manual, and calibration certificates. | 1 | |
| 2001124 | 4-Bottle low pressure nitrogen regulator system. | 1 | |
| 2001302 | Fluid Dispenser, 5-Gallon Capacity, MIL-H-5606, Turbine Fluids, Engine Oil, Low Pressure Unit, 7.2 cubic inch output per stroke, 15 ft hose | 1 | |
| 2001307 | Fluid Dispenser, 5-Gallon Capacity, Skydrol, Low Pressure Unit, 7.2 cubic inch output per stroke, 15 ft hose | 1 | |
| 2001313 | Fluid Dispenser, 20-Gallon Capacity, MIL-H-5606, Turbine Fluids, Engine Oil, Low Pressure Unit, 7.2 cubic inch output per stroke, 15 ft hose. | 1 | |
| 2001318 | Fluid Dispenser, 20-Gallon Capacity, Skydrol, Low Pressure Unit, 7.2 cubic inch output per stroke, 15 ft hose | 1 | |
| 2001405 | TYER PRESSURE GAGE | 1 | |
| 2001882 | TYRE SERVICE GUAGE INFLATOR, LOW PRESSURE NITROGEN | 1 | |
| 2002332 | N2 PRESSURE GAUGUE 400 PSI , ( 2.5 FACE,1/4” LM ) | 1 | |
| 2002628 | Low Pressure Tire/Strut Service Gauge: *Digital* Nitrogen (300psi). Bleed Valve, Inlet valve stem connection (m 0.305-32). Outlet hose 18 inch w/valve stem (f 0.305-32). Calibrated gauge with certificates. | 1 | |
| 2002629 | Low Pressure Tire/Strut Service Gauge: Nitrogen (300psi). Bleed Valve, Inlet valve stem connection (m 0.305-32). Outlet hose 18 inch w/valve stem (f 0.305-32). Calibrated gauge with certificates. | 1 | |
| 2002630 | High Pressure Strut Service Gauge: *Digital* Nitrogen (0-3,000 psi). Calibrated gauge with certificates. | 1 | |
| 2002631 | High Pressure Strut Service Gauge: *Digital* Nitrogen (0-5,000 psi). Calibrated gauge with certificates. | 1 | |
| 2002632 | High Pressure Strut Service Gauge: Nitrogen (0-3000 psi). Calibrated gauge with certificates. | 1 | |
| 2002633 | Tire Pressure Gauge (0-300psi). Calibrated gauge with certificates. | 1 | |
| 2002663 | TIRE PRESSURE GAUGE | 1 | |
| 2002759 | Inflating valve adapter, without core depressing pin, 3000 max PSI, Inlet connection (F. 1/8 NPT) Outlet connection (F. threads 0.305-32) | 1 | |
| 2002760 | Strut Service Valve Adapter Inflating connection with core depressor pin, 3000 max PSI, Inlet connection (-4 M JIC), Outlet connection (F threads 0.305-32) | 1 | |
| 2002761 | Strut Service Valve Adapter Inflating connection with core depressor pin, 3000 max PSI, Inlet connection (-3 M JIC), Outlet connection (F threads 0.305-32) | 1 | |
| 2002763 | Strut Service Valve Adapter Inflating connection with core depressor pin, 3000 max PSI, Inlet connection (1/8 NPTF), Outlet connection (F threads 0.305-32) | 1 | |
| 2002841 | Tire Pressure Gauge (0-300psi). *DIGITAL* Calibrated gauge with certificates. | 1 | |
| 2010793 | 2nd Fuel Lift Assembly for 2010790 Fueling Stand. 450GPM. Includes surge suppressor, nozzle pressure gauge, 10' x 2.5' EI1529 rated hose and Cla-Val nozzle and bottom load fittings. | 1 | |
| 2010795 | Main Fuel Lift Assembly for 2010789 Fueling Stand. 450GPM. Includes surge suppressor, nozzle pressure gauge, 10' x 2.5' EI1529 rated hose and Cla-Val nozzle and bottom load fittings. | 1 | |
| 2010796 | Main Fuel Lift Assembly for 2010790 Fueling Stand. 450GPM. Includes surge suppressor, nozzle pressure gauge, 10' x 2.5' EI1529 rated hose and Cla-Val nozzle and bottom load fittings. | 1 | |
| 2011339 | Hydraulic Power Unit Size 2-15HP-5606. Mineral Based Fluid. Max Pressure 3,500PSI (241 BAR). Max Flow Rate 12GPM (45 LPM). Max Flow Rate @ 3000 PSI 8 GPM (30 LPM). 3 Phase Power 50hz or 60hz. | 1 | |
| 2014254 | Hydraulic Power Unit Size 2-30HP-5606. Mineral Based Fluid. Max Pressure 3,500PSI (241 BAR). Max Flow Rate 20GPM (45 LPM). Max Flow Rate @ 3000 PSI 17 GPM (64 LPM). 3 Phase Power 50hz or 60hz. | 1 | |
| 2015078 | Hydraulic Power Unit Size 3-40HP-Skydrol. Phosphate Ester. Max Pressure 4,000PSI (275 BAR). Max Flow Rate 47GPM (177 LPM). Max Flow Rate @ 3000 PSI 21 GPM (79 LPM). 3 Phase Power 50hz or 60hz. | 1 | |
| 2016729 | Hydraulic Power Unit Size 2-15HP-Skydrol. Phosphate Ester. Max Pressure 3,500PSI (241 BAR). Max Flow Rate 12GPM (45 LPM). Max Flow Rate @ 3000 PSI 8 GPM (30 LPM). 3 Phase Power 50hz or 60hz. | 1 | |
| 2016730 | Hydraulic Power Unit Size 2-30HP-Skydrol. Phosphate Ester. Max Pressure 3,500PSI (241 BAR). Max Flow Rate 20GPM (45 LPM). Max Flow Rate @ 3000 PSI 17 GPM (64 LPM). 3 Phase Power 50hz or 60hz. | 1 | |
| 2016904 | Hydraulic Power Unit Size 3-60HP-Skydrol. Phosphate Ester. Max Pressure 4,000PSI (275 BAR). Max Flow Rate 47GPM (177 LPM). Max Flow Rate @ 3000 PSI 33 GPM (125 LPM). 3 Phase Power 50hz or 60hz. | 1 | |
| 2016905 | Hydraulic Power Unit Size 3-75HP-Skydrol. Phosphate Ester. Max Pressure 4,000PSI (275 BAR). Max Flow Rate 47GPM (177 LPM). Max Flow Rate @ 3000 PSI 41 GPM (155 LPM). 3 Phase Power 50hz or 60hz. | 1 | |
| 2021069 | AERO Hydraulic Power Unit Size 4-150HP-Skydrol. Phosphate Ester. Max Pressure 5,000PSI (344 BAR). Max Flow Rate 63GPM (238 LPM). Max Flow Rate @ 3000 PSI 21 GPM (79 LPM). 3 Phase Power 50hz or 60hz. | 1 | |
| 2021126 | Hydraulic Power Unit Size 1-5HP-5606. Mineral Based Fluid. Max Pressure 3,000 PSI (206 BAR). Max Flow Rate 6GPM (22 LPM). Max Flow Rate @ 3000 PSI 2.75 GPM (10 LPM). Single Phase Power 60hz. | 1 | |
| 2021961 | Hydraulic Power Unit Size 1-5HP-Skydrol. Phosphate Ester. Max Pressure 3,000 PSI (206 BAR). Max Flow Rate 6GPM (22 LPM). Max Flow Rate @ 3000 PSI 2.75 GPM (10 LPM). 3 Phase Power 50hz or 60hz. | 1 | |
| 2022229 | Hydraulic Power Unit Size 1-10HP-Skydrol. Phosphate Ester. Max Pressure 3,000 PSI (206 BAR). Max Flow Rate 6GPM (22 LPM). Max Flow Rate @ 3000 PSI 5.5 GPM (20 LPM). 3 Phase Power 50hz or 60hz. | 1 | |
| 2022320 | Hydraulic Power Unit Size 1-5HP-Skydrol. Phosphate Ester. Max Pressure 3,000 PSI (206 BAR). Max Flow Rate 6GPM (22 LPM). Max Flow Rate @ 3000 PSI 2.75 GPM (10 LPM). Single Phase Power 60hz. | 1 | |
| 2022321 | Hydraulic Power Unit Size 1-10HP-5606. Mineral Based Fluid. Max Pressure 3,000 PSI (206 BAR). Max Flow Rate 6GPM (22 LPM). Max Flow Rate @ 3000 PSI 5.5 GPM (20 LPM). 3 Phase Power 50hz or 60hz. | 1 | |
| 2023015 | MECHANICAL BANK PRESS | 1 | |
| 2024067 | Fixture-Press Seal And Shim | 1 | |
| 2024185 | Test Set - Proof Press | 1 | |
| 2025620 | AERO DIGITAL TYRE PRESSURE GUAGE | 1 | |
| 2067100 | HIGH PRESSURE 750MM | 1 | |
| 2135363 | COMPRESSOR WASH RIG-PRESSURE GAUGE(0-140PSI) | 1 | |
| 2242118 | TEST ADAPTER PRESSURE TEST | 1 | |
| 2242119 | TEST ADAPTER PRESSURE TEST | 1 | |
| 2242625 | PRESSURE TEST ADAPTORS | 1 | |
| 2242655 | ADAPTORS, PRESSURE TEST | 1 | |
| 2242665 | PRESSURE TESR | 1 | |
| 2242674 | ADAPTOR PRESSURE TEST | 1 | |
| 2242726 | PRESSURE TEST ADAPTOR | 2 | |
| 2242776 | PLUG-PRESSURE TEST | 2 | |
| 2242907 | PRESSURE TEST ADAPTOR | 1 | |
| 2242938 | PRESSURE TEST RING | 1 | |
| 2242973 | PRESSURE TEST RIG | 1 | |
| 2242975 | PRESSURE TEST RIG | 1 | |
| 2242977 | ADAPTOR PLATE AND PRESSURE TEST BODY | 1 | |
| 2242978 | PRESSURE TEST ADAPTOR | 1 | |
| 2242979 | PRESSURE TEST ADAPTOR | 1 | |
| 2243129 | PRESSURE TEST ASSY | 1 | |
| 2243130 | PRESSURE TEST ASSEMBLY | 1 | |
| 2244303 | PRESSURE TEST ADAPTOR | 1 | |
| 2244310 | PRESSURE TEST ADAPTOR | 1 | |
| 2244456 | ADAPTOR-PRESSURE TEST | 1 | |
| 2244457 | ADAPTOR-PRESSURE TEST | 1 | |
| 2550700 | Punch Pressing, Valve Assy | 1 | |
| 2550717 | Punch, Pressing, Speed Cam Lever Assy. | 1 | |
| 2557076 | Compressor | 1 | |
| 2557854 | Pressurizing Valve Cover Sizing Fixture | 1 | |
| 2560826 | PISTON COMPRESSION TOOL | 1 | |
| 2561581 | Press Valve Test Fixture | 1 | |
| 2561588 | Depressor, spring | 2 | |
| 2566533 | Metering Valve sleeve Packing Compression Tool Set | 1 | |
| 2566536 | Pressurizing Valve Cover Torquing Fixture | 1 | |
| 2566538 | Pressure Shutoff Valve Removal Puller | 1 | |
| 2566547 | Integrator Piston Seal Compression Tool Set | 1 | |
| 2566823 | Speed Servo Sleeve Packing Compression Tool Set | 1 | |
| 2566835 | Pressurizing Intallation Tool | 1 | |
| 2680106 | SEAT PRESS TOOL | 1 | |
| 2889073 | MANO DE VERIFICATION PRESSION ROUE | 1 | |
| 3010018 | OIL PRESS SENDER | 1 | |
| 3012501 | 1º ST STAGE COMPRESSOR BLADES | 1 | |
| 3021000 | HIGH PRESSURE 12X100 | 1 | |
| 3022000 | HIGH PRESSURE 100012x100MM | 1 | |
| 3028573 | TUBE ASSEMBLY AIR PRESS REAR | 1 | |
| 3045616 | ENG. COMPRESS WASH ADAPTER | 3 | |
| 3070816 | INLET PRESS AND TEMP SENSOR | 1 | |
| 3113000 | HIGH PRESSURE 4000MM | 1 | |
| 3114001 | HIGH PRESSURE PIPE 4000MM | 1 | |
| 3135000 | PRESSURE GAUGE REDUCER | 1 | |
| 3167059 | PRESSURE SWITCH FITTING | 1 | |
| 3200326 | ULTRA HIGH DELIVERY PRESSURE REGULATOR | 1 | |
| 3302242 | PRESSURE RELIEF VALVE TEST RIG | 1 | |
| 3607876 | METERED PRESSURE TEST FITTING | 1 | |
| 4001761 | COMPRESSOR COVER ASSY | 1 | |
| 4026733 | ARM,COMPRESSOR STATOR LINKAGE | 1 | |
| 4041450 | "COOLANT TANK PRESSURE TOOL | 1 | |
| 4160240 | SEAL COMPRESSION TOOL SET | 1 | |
| 4160313 | SEAL COMPRESSION TOOL | 1 | |
| 4160314 | SEAL COMPRESSION TOOL | 1 | |
| 4253167 | PRESSURE GAUGE | 1 | |
| 4270045 | WIKA TYPE 212.53 PRESSURE GAUGE - 0 - 15 PSI - 2 1/2" - 1/4" NPT - 4270045 | 1 | |
| 4270070 | WIKA TYPE 212.53 PRESSURE GAUGE - 0 - 100 PSI - 2 1/2" - 1/4" NPT - 4270070 | 1 | |
| 4270088 | WIKA TYPE 212.53 PRESSURE GAUGE - 0 - 160 PSI - 2 1/2" - 1/4" NPT - 4270088 | 1 | |
| 4270100 | WIKA TYPE 212.53 PRESSURE GAUGE - 0 - 300 PSI - 2 1/2" - 1/4" NPT - 4270100 | 1 | |
| 4270126 | WIKA TYPE 212.53 PRESSURE GAUGE - 0 - 600 PSI - 2 1/2" - 1/4" NPT - 4270126 | 1 | |
| 4270185 | 4270185 212.53 PRESSURE GAUGE, 0-5000 PSI, 2.5" DIAL | 1 | |
| 4270355 | 4270355 212.53 PRESSURE GAUGE, 0-200 PSI, 2.5" DIAL | 1 | |
| 4317885 | FLUKE MAKE 3130-G2M PORTABLE GAS PRESSURE CALIBRATOR | 1 | |
| 4950036 | SENSOR PRESSURE | 5 | |
| 4952366 | SWITCH, APU LOW OIL PRESS | 1 | |
| 5009841 | DISK PRESSURE - PLAT | 2 | |
| 5013721 | SPRING, HELICAL COMPRESSION | 1 | |
| 5102002 | PRESSURE REGULATOR 4BAR | 1 | |
| 5143200 | VALVE: RELIEF,PRESSURE, | 2 | |
| 5153560 | AKKU-FETTPRESSE, KS TOOLS - BATTERY GREASE PRESS | 1 | |
| 5308184 | SHIELD PRESSURE TUBE TURBINE EXHAUST CASE | 1 | |
| 5311461 | PIN SHOULDER LOW PRESSURE COMPRESSOR SHROUD INLET | 1 | |
| 5312046 | DUCT ASSY OF AIR COOLING HIGH PRESSURE TURBINE | 1 | |
| 5312206 | DUCT ASSY OF AIR PRESSURE,STARTER VALVE | 1 | |
| 5315781 | BRACKET ASSY OF COMPRESSOR INTERMEDIATE CASE | 1 | |
| 5318438 | BRACKET ASSY OF LOW PRESSURE COMPRESSOR CASE | 1 | |
| 005560099 | Schrader 556 High Pressure Strut Coupler - 18 NPT Male - 3,000 PSIG | 2 | |
| 5605520 | GAGE ABSOLUTE PRESSURE | 1 | |
| 5909051 | COVER: PRESSURE, | 2 | |
| 5955613 | KEEPER- MLG PRESSURE TEST; MD-80 | 1 | |
| 6000100 | DIGITAL PRESSURE METER / PITOT STATIC READER | 1 | |
| 6515047 | PRESSURE RELIEF VALVE TEST | 1 | |
| 6547544 | COMPRESSION TOOL | 1 | |
| 6605221 | FUEL PRESSURE TEST INHIBITING RIG | 1 | |
| 6605856 | FLEXIBOX COMPRESSION TOOL | 1 | |
| 6795582 | FIXTURE, COMPRESSOR TIE BOLT STRETCH | 2 | |
| 6795586 | WRENCH SPANNER, COMPRESSOR REAR BEARIN RETAINIG NUT | 2 | |
| 6795594 | FIXTURE ASSEMBLY COMPRESSOR ROTOR | 2 | |
| 6795596 | SPREADER, COMPRESSOR WHEEL (NEED LIKE OURS) | 1 | |
| 6795790 | PROBE - PRESSURE | 1 | |
| 6795794 | PROBE TEMPERATURE COMPRESSOR AIR INLET | 2 | |
| 6795966 | FIXTURE, SUPPORT COMPRESSOR | 3 | |
| 6796090 | DRILL - JIG - COMPRESSOR | 1 | |
| 6796091 | DRILL JIG - COMPRESSOR ROTOR | 1 | |
| 6796097 | SPREADER - COMPRESSOR HSG FRT | 1 | |
| 6796126 | COMPRESSOR REVERSE TORQUE SPRINGS | 1 | |
| 6796129 | STAND,COMPRESSOR ROTOR TRANSPORTATION | 3 | |
| 6796169 | GUIDE PIN - COMPRESSOR REAR SEAL AND BEARING | 2 | |
| 6796170 | SPREADER - COMPRESSOR HOUSING REAR | 1 | |
| 6796187 | Compressor | 1 | |
| 6796190 | DRIVER - COMPRESSOR REAR BEARING AND SEAL | 2 | |
| 6796193 | LIFT - COMPRESSOR HOUSING | 1 | |
| 6796194 | DRIFT - COMPRESSOR FRONT BEARING OUTER RACE | 2 | |
| 6796235 | PULLER PLATE - COMPRESSOR EXTENSION SHAFT BEARING | 3 | |
| 6796262 | SUPPORT, COMPRESSOR | 2 | |
| 6796273 | COMPRESSOR ROTOR CHECK GAUGE | 1 | |
| 6796344 | ADAPTER SET,GRINDING, COMPRESSOR ROTOR BLADE TIP | 1 | |
| 6796352 | Hydraulic Press | 1 | |
| 6796360 | PULLER - COMPRESSOR BLADE RETAINING PIN | 1 | |
| 6796464 | ADAPTER, LIFTER COMPRESSOR ASSEMBLY | 2 | |
| 6796513 | Compressor | 2 | |
| 6796530 | WRENCH - SPANNER, TURBINE TO COMPRESSOR TIE BOLT LOCKNUT | 3 | |
| 6796533 | TURBINE TO COMPRESSOR SPANNER WRENCH | 3 | |
| 6796586 | SUPPORT - COMPRESSOR WHEEL AND BLADE 1ST & 14TH | 1 | |
| 6796587 | SUPPORT - COMPRESSOR WHEEL AND BLADE 2ND THROUGH 13TH | 1 | |
| 6796609 | GAGE ,SETTING,COMPRESSOR CASE BORING FIXTURE | 1 | |
| 6796646 | MACHINE, COMPRESSOR HOUSING | 1 | |
| 6796663 | Front Adapter Compressor Housing Assy | 1 | |
| 6796664 | Rear Adapter Compressor Housing Assy | 1 | |
| 6796665 | ADAPTER, LIFTING, COMPRESSOR | 1 | |
| 6796666 | Adapter Compressor Housing Assy Grit Blast | 1 | |
| 6796667 | Holding Fixture Compressor Housing Assy Grit Blast | 2 | |
| 6796668 | Mask Compressor Housing Assy Vane Groove 5/8 inch | 4 | |
| 6796669 | Mask Compressor Housing Assy Vane Groove 7/8 inch | 4 | |
| 6796671 | Spacer Compressor Housing Assy Split Line | 1 | |
| 6796697 | ADAPTER – STAND, COMPRESSOR SECTION | 2 | |
| 6796717 | ADAPTER - COMPRESSOR AIR INLET | 1 | |
| 6796749 | PLIERS - TURBINE-TO-COMPRESSOR TIE BOLT RING | 1 | |
| 6796763 | Gage Width Compressor Vane Seal | 1 | |
| 6796771 | PROBE - COMPRESSOR AIR BLEED VALVE POSITION | 2 | |
| 6796828 | COMPRESSURE THRUST SIGNAL PLUNGER | 1 | |
| 6796853 | Punch Compressor Housing Bleed Hole Inert | 1 | |
| 6796898 | COMPRESSOR | 1 | |
| 6796899 | 1ST STAGE COMP. ROTOR PRESS ADAPTER | 1 | |
| 6796900 | Compressor | 1 | |
| 6796901 | Compressor, Compressor Front Bearing Outer Race | 2 | |
| 6796902 | GAGE BLOCK UNIT,COMPRESSOR VANES | 1 | |
| 6796952 | Puller â Forward Bearing & Seal, Compressor | 2 | |
| 6796965 | ADAPTER, ATTACHING COMPRESSOR UNIT (AIR INLET HOUSING) TO MAINTENANCE STAND | 2 | |
| 6796970 | BOX - STORAGE, COMPRESSOR FRONT LABYRINTH SEAL | 2 | |
| 6796971 | PULLER, COMPRESSOR, FRONT BEARING | 3 | |
| 6796974 | PLIERS - REMOVAL AND INSTALLATION, LOW PRESSURE FUEL FILTER RETAINING RING | 2 | |
| 6796975 | Depressor | 1 | |
| 6796976 | DEPRESSOR - SPRING, LOW PRESSURE FUEL FILTER ELEMENT SUPPORT | 2 | |
| 6796984 | INLET CASE PRESSURE TEST FIXTURE | 1 | |
| 6797006 | WRENCH- TURBINE TO COMPRESSOR TIE BOLT | 1 | |
| 6797007 | WRENCH- TURBINE TO COMPRESSOR | 1 | |
| 6797015 | HOLDER, COMPRESSOR EXTENSION SHAFT, FORWARD SPLINE | 2 | |
| 6797022 | PULLER - COMPRESSOR EXTENSION SHAFT BEARING HOUSING ASSEMBLY | 1 | |
| 6797044 | GAGE - COMPRESSOR ROTOR TO VANE ASSEMBLY AXIAL CLEARANCE | 1 | |
| 6797120 | COMPRESSOR - SAFTEY COUPLING | 1 | |
| 6797129 | DRIFT - COMPRESSOR FRT SEAL REMOVAL | 1 | |
| 6797156 | COVER - COMPRESSOR ROTOR | 1 | |
| 6797268 | COMPRESSOR ROLL STAND | 1 | |
| 6797558 | Press – Hydraulic, 20 Ton Capacity | 1 | |
| 6797670 | FIXTURE,HOLDING,COMPRESSOR ROTOR HOUSING | 1 | |
| 6797680 | SUPPORT PLATE, COMPRESSOR CASE | 1 | |
| 6797708 | PULLER, COMPRESSOR REAR BEARING & DOUBLE LABYRINTH SEAL | 2 | |
| 6797918 | ENGINE COMPRESSOR CLEANING ASPERSOR | 3 | |
| 6797939 | Compressor | 2 | |
| 6797940 | Compressor | 2 | |
| 6797963 | PROBE, COMPRESSOR BLEED VALVE | 2 | |
| 6797968 | COMPRESSOR | 1 | |
| 6798038 | COMPRESSOR AIR INLET SCREEN | 2 | |
| 6798048 | GAGE--PLUG, PRESSURE OIL PUMP BUSHIN | 1 | |
| 6798051 | JIG--DRILL, PRESSURE OIL PUMP BODY BUSHING PIN | 1 | |
| 6798131 | WRENCH - SPANNER, REDUCTION GEAR OIL PUMP PRESSURE ADJUSTING VALVE THREADED BUSHING | 2 | |
| 6798140 | PROBE COMBINATION, COMPRESSOR DISCHARGE TEMPERATURE AND PRESSURE | 1 | |
| 6798143 | Plenum - Air Inlet, Compressor | 1 | |
| 6798223 | GAGE - CHECKING, COMPRESSOR | 1 | |
| 6798227 | FIXTURE, CHECKING, COMPRESSOR VANE ASSEMBLY | 1 | |
| 6798250 | PULLER - COMPRESSOR SPUR GEAR | 1 | |
| 6798256 | BAND - ANGLE REFERENCE, COMPRESSOR ROTOR BAL. | 1 | |
| 6798787 | FIXTURE - PRESSURE CHK, COMP DISCHARGE AIR TUBE AS | 1 | |
| 6798796 | DRIFT-VIBRATION DAMPER, COMPRESSOR FRONT BEARING | 3 | |
| 6798803 | Drift - COMPRESSOR REAR | 1 | |
| 6798807 | COMPRESSOR—LUBE OIL FILTER POPPET VALVE | 1 | |
| 6798861 | COMPRESSOR PROTECTOR | 1 | |
| 6798927 | COMPRESSOR IMPELLER ASSEMBLY | 2 | |
| 6799210 | PROBE - PRESSURE, BREATHER VENT | 2 | |
| 6799572 | Comp Diffuser Pressure Test | 2 | |
| 6799637 | TURB. WHEEL&SPACER PRESS ADAPTER | 1 | |
| 6799700 | PULLER-VIBRATION DAMPER, COMPRESSOR FRONT BEARING | 3 | |
| 6799815 | FIXTURE, PRESSURE TEST | 1 | |
| 6799816 | FIXTURE, PRESSURE TEST | 1 | |
| 6799818 | FIXTURE, PRESSURE TEST | 1 | |
| 6799952 | CLAMP INSTALLATION COMPRESSOR DISCHARGE AIR TUBE TO OUTER COMBUSTION CASE | 3 | |
| 6799953 | INSTALL COMPRESSOR SCROLL TO AIR DUCT CLAMP | 3 | |
| 6799959 | PRESS - GAS PRODUCER | 2 | |
| 6851349 | Plenum - Air Inlet, Compressor | 2 | |
| 6872162 | FIXTURE - PRESSURE TEST | 1 | |
| 6872181 | GAGE - COMPRESSOR CASE ASSY | 1 | |
| 6872533 | INSTALLATION & REMOVAL COMPRESSION TIE BOLT | 2 | |
| 6872543 | PRESS - INSTALLATION | 2 | |
| 6872544 | BELL – AIR INLET, COMPRESSOR | 2 | |
| 6872550 | HOLDER - COMPRESSOR ROTOR COUPLING ADAPTER | 2 | |
| 6872601 | FIXTURE - WELDING, COMPRESSOR DISCHARGEAIR TUBE | 1 | |
| 6872603 | FIXTURE - PRESSURE TEST, COMP DISCHARGE AIR TUBE | 1 | |
| 6872632 | FIXTURE - MACHINING, COMPRESSOR CASE | 1 | |
| 6872633 | GAGE - COMPRESSOR CASE | 1 | |
| 6872646 | Guide-Compressor Installation | 2 | |
| 6872728 | WRENCH - COMPRESSOR REAR OUTER | 1 | |
| 6872729 | WRENCH - COMPRESSOR REAR INNER | 1 | |
| 6872804 | FIXTURE - PRESSURE CHECK | 1 | |
| 6872805 | FIXTURE - STRESS RELIEVE, COMPRESSOR CASE ASSY | 1 | |
| 6872806 | FIXTURE - WELD, COMPRESSOR STATOR VANE ASSY | 1 | |
| 6872810 | WIER - SET, COMPRESSOR PLASTIC LINING | 1 | |
| 6872811 | FIXTURE - BURNOUT, COMPRESSOR PLASIC COATING | 1 | |
| 6872812 | MASK - COMPRESSOR CASE 5TH STAGE | 1 | |
| 6872832 | PULLER - COMPRESSOR ADAPTER | 2 | |
| 6872880 | FIXTURE----CHECKING, COMPRESSOR MOUNTING INSERTS (GEARBOX) | 1 | |
| 6872881 | WRENCH COMPRESSOR MOUNTING INSERTS GEAR BOX | 2 | |
| 6872882 | WRENCH----COMPRESSOR MOUNTING INSERTS (GEARBOX) | 2 | |
| 6872927 | WRENCH----COMPRESSOR MOUNTING FLANGED STUDS | 1 | |
| 6872984 | FIXTURE - HOLDING, COMPRESSOR REAR | 1 | |
| 6873007 | ADAPTER----COMPRESSOR ADAPTER COUPLING | 1 | |
| 6873066 | FIXTURE-COMPRESSOR | 1 | |
| 6877012 | HOLDING FIXTURE PRESSURE TEST | 1 | |
| 6877014 | PURGE FIXTURE, AIR (CHECK VALVE REMOVAL) BACK PRESSURES FUEL NOZZLE TO BLOW CHIPS OUT OF NOZZLE DURING CHECK VALVE MACHINING OPERATION. | 1 | |
| 6877021 | SEAL FIXTURE, SECONDARY ORIFICE (WITH INLET SIMULTANEOUSLY CONNECTS METERING AND EXIT HOSE) TIP AND INLET OF FUEL NOZZLE ASSEMBLY TO PRESSURE SOURCE FOR PROOF TESTING. | 1 | |
| 6877026 | "COO WASHER ASSEMBLY/ DISASSEMBLY TOOL COMPRESSES SPRING IN CARTRIDGE VALVE FOR INSTALLATION/REMOVAL OF SLOTTED WASHER. | 1 | |
| 6877108 | ASSEMBLY FIXTURE ASSISTS REMOVAL OF CARTRIDGE VALVE FROM FUEL NOZZLE CARTRIDGE VALVE CAVITY USING AIR PRESSURE THROUGHTIP END. | 1 | |
| 6886204 | KIT-PROTECTOR COMPRESSOR CLEANING | 2 | |
| 6887000 | PRESSURE DECAY TEST FIXTURE | 1 | |
| 6887006 | PRESSURE TEST FIXTURE INLET COVER | 1 | |
| 6887894 | ADAPTER - SCAVENGE OIL PRESSURE TEST | 1 | |
| 6889889 | BEARING POWER TURBINE & COMPRESSOR PULLER | 2 | |
| 6889890 | PULLER----COMPRESSOR REAR BEARING OUTER RING | 2 | |
| 6889891 | HOLDER - COMPRESSOR ROTOR SPLINED | 3 | |
| 6889892 | WRENCH - COMPRESSOR REAR BEARINGCLAMP | 1 | |
| 6891195 | PULLER - COMPRESSOR ROTOR SPLINED ADAPTER | 2 | |
| 6891196 | PRESS - POWER TURBINE ROTATING | 1 | |
| 6891197 | PRESS - COMPRESSOR REAR BEARING | 1 | |
| 6893360 | FIXTURE - ASSEMBLY, COMPRESSOR | 2 | |
| 6893363 | FIXTURE - PRESSURE CHECK | 1 | |
| 6893364 | DRIFT - COMPRESSOR REAR | 1 | |
| 6893377 | Press Installation Power Turbine | 2 | |
| 6893383 | FIXTURE - COMPRESSOR AXIS ALIGNMENT | 2 | |
| 6893535 | COMPRESSOR CARBON SEAT RETAINER | 3 | |
| 6893700 | PRESS NO. 8 BEARING OIL JET | 2 | |
| 6893734 | WRENCH - COMPRESSOR | 2 | |
| 6893735 | DRIFT-COMPRESSOR REAR LABYRINTH | 1 | |
| 6893738 | COMPRESSOR CARBON SEAL RET RING PLIER | 2 | |
| 6893739 | PULLER--COMPRESSOR REAR BEARING, OIL SLINGER AND SEAL | 2 | |
| 6895528 | PUSHER--COMPRESSOR REAR BEARING | 2 | |
| 6895538 | PRESS一GAS PRODUCER TURBINE ROTOR AND BEARING | 1 | |
| 6895994 | FIXTURE - PRESSURE TEST | 1 | |
| 6897006 | PRESSURE TEST FIXTURE, INLET COVER | 1 | |
| 6897103 | HOLDING FIXTURE, TIP SEAL HOLDS METERING SET SEAL FIXTURES ON FUEL NOZZLE FOR PRESSURE TESTING. | 1 | |
| 6897104 | SEAL FIXTURE, PRIMARY ORIFICE PLUGS PRIMARY ORIFICE DURING PAST WELD PRESSURE TEST, NO SECONDARY PRESENT. | 1 | |
| 6897434 | FIXTURE--CONCENTRICITY, COMPRESSOR ROTOR | 1 | |
| 6897884 | HEATER - AIR, COMPRESSOR ROTOR WHEEL ASSEMBLY | 1 | |
| 6897894 | COMPRESSOR ROTOR CASE ROUNDING TOOL | 2 | |
| 6898412 | #1 SEAL SPRING COMPRESSOR | 2 | |
| 6898448 | ADAPTER - TEST, ENGINE DIFFUSER BLEED PRESSURE | 1 | |
| 7203574 | ANALOGUE PRESSURE GAUGE 6BAR BOTTOM ENTRY, 0BAR MIN | 1 | |
| 7253546 | WIKA 7253546 MODEL CPH 6200 HAND-HELD PRESSURE INDICATOR 1 CHANNEL VERSION | 1 | |
| 8003639 | PRESSURE GAUGE | 1 | |
| 8079633 | PRESSURE GAUGE 0-30 PSI | 1 | |
| 8580152 | Arbor Press | 1 | |
| 8600063 | ADAPTER, COMPRESSOR WASHING | 1 | |
| 8600222 | LOW PRESSURE INHIBITING ADAPTER | 2 | |
| 8600223 | HIGH PRESSURE INHIBITING ADAPTER | 1 | |
| 8743890 | GAGE,PRESSURE,DIAL | 1 | |
| 8772400 | TRAILERCOMPRESSED GAS | 1 | |
| 8990382 | REGULATOR - PRESSURE, 0 TO 250 PSI WITH PRESSURE GAUGE, 3/8 INCH ID CONNECTIONS | 1 | |
| 9006107 | PRESSURE GAUGE (0-4000 PSI) | 1 | |
| 9314204 | ANALOG POSITIVE PRESS GAUGE BACK ENTRY 600BAR,CONNECTION SIZE G 1/4 | 1 | |
| 9692075 | WIKA PRESSURE GAUGE: TYPE 213.53, DIAL SIZE 2 ½ INCH, PRESSURE RANGE 1000 PSI / 70BAR, PROCESS CONN. | 1 | |
| 9748207 | WIKA PRESSURE GAUGE: TYPE 213.53, DIAL SIZE 2 ½ INCH, PRESSURE RANGE 6000 PSI / 480 BAR, PROCESS CON | 1 | |
| 9768947 | WIKA PRESSURE GAUGE: TYPE 213.53, DIAL SIZE 2 ½ INCH, PRESSURE RANGE 600 PSI, PROCESS CONN. ¼ INCH, | 1 | |
| 9887000 | PRESSURE DECAY TEXT FIXTURE | 1 | |
| 10000299 | MOBILEHIGH-PRESSURE | 1 | |
| 10012463 | VALVE, BLEED PRESSURE REGULATING | 2 | |
| 10016605 | GAUGE PRESSURE | 1 | |
| 10029566 | AIR COMPRESSOR BELT DRIVEN TWO STAGE | 1 | |
| 10453910 | REGULADOR DE PRESSAO NITROGENIO - CILINDRO SERIE 700 - CARBOGRAFITE | 1 | |
| 11838813 | ADAPTER, PRESSURE GA | 1 | |
| 13007957 | PRESSURE GAUGE | 1 | |
| 22000480 | HYD PRESSURE TRANSMITTER | 1 | |
| 22421017 | ADAPTOR-PRESSURE TEST | 1 | |
| 22421338 | PRESSURE ADAPTOR | 1 | |
| 23002210 | COMPRESSOR ROTOR BALANCE CORRECTION FIXTURE | 2 | |
| 23002211 | WRENCH REMOVAL & INSTALL COMPRESSION BLEED VALVE | 2 | |
| 23005023 | PULLER--BEARING, FRONT COMPRESSOR | 3 | |
| 23005444 | Machine Grit Blast Compressor Housing Assy | 1 | |
| 23006303 | FIXTURE PRESSURE TEST POWER TURBINE ROTOR | 2 | |
| 23006784 | GUIDE INSTALL COUPLING TURBINE TO COMPRESSOR | 2 | |
| 23008673 | COMPRESSOR ROTOR SPLINE ADAPTER | 2 | |
| 23030279 | GAUGE-COMPRESSOR IMPELLER SPLINE | 1 | |
| 23033026 | NUT CLAMP COMPRESSOR ROTOR ASSEMBLY FIXTURE | 2 | |
| 23033027 | PULLER BEARING AND MATTING SEAL RACE COMPRESSOR FRONT | 2 | |
| 23033028 | FIXTURE CHECKING COMPRESSOR ROTOR TIE BOLT STRETCH | 1 | |
| 23033029 | FIXTURE ALIGNING COMPRESSOR ROTOR | 1 | |
| 23033030 | DRIFT--INSTALLATION, COMPRESSOR FRONT BEARING INNER RACE AND SEAL | 1 | |
| 23033032 | DRIFT--COMPRESSOR FRONT BEARING OUTER RACE | 1 | |
| 23033033 | DRIFT--GUIDED, COMPRESSOR FRONT BEARING RING SEAL | 1 | |
| 23033034 | PULLER--COMPRESSOR FRONT BEARING OUTER RACE | 1 | |
| 23033035 | PULLER--COMPRESSOR FRONT BEARING RING SEAL | 1 | |
| 23033036 | FIXTURE--SEPARATING, COMPRESSOR WHEEL | 1 | |
| 23033037 | HOLDER--COMPRESSOR ROTOR COUPLING ADAPTER | 1 | |
| 23033038 | MASK--SPRAY, COMPRESSOR ROTOR DIFFUSER MASKS THE REAR DIFFUSER AND NO. 2 BEARING BORE DURING APPLICATION OF SPRAY COATING FOR LABYRINTH S | 1 | |
| 23033039 | CHART--COMPARATOR, COMPRESSOR FRONT DIFFUSER INSIDE CONTOUR USED TO CHECK | 1 | |
| 23033040 | ADAPTER--PRESSURE CHECK FIXTURE, | 1 | |
| 23033041 | RINGS--INSPECTION AND GRINDING, COMPRESSOR STATOR VANE ID | 1 | |
| 23034275 | ADAPTER--PILOT, COMPRESSOR REAR BEARING PULLER U | 1 | |
| 23034304 | MASK--BALANCE CUT, COMPRESSOR ROTOR IMPELLER LIMITS STOCK REMOVAL TO THE ACCEPTABLE AREAS WHEN BALANCING THE COMPRESSOR ROTOR ASSEMBLY. | 1 | |
| 23034393 | FIXTURE--ALIGNMENT, COMPRESSOR SHROUD US | 1 | |
| 23034394 | FIXTURE--RETAINING, COMPRESSOR ROTOR BALANCE USED | 1 | |
| 23037973 | MASK--BLASTING, COMPRESSOR THIRD-STAGE VANE ASSEMBLY | 1 | |
| 23037974 | MASK--BLASTING, COMPRESSOR FIRST-STAGE VANE ASSEMBLY | 1 | |
| 23037978 | FIXTURE BLAST, COMPRESSOR FOURTH-STAGE VANE AND BAND ASSEMBLY | 1 | |
| 23037979 | MASK--BLAST, COMPRESSOR SECOND-STAGE VANE ASSEMBLY USE | 1 | |
| 23037980 | MASK--SPRAY, COMPRESSOR FOURTH-STAGE VANE ASSEMBLY | 1 | |
| 23037981 | MASK--BLAST, COMPRESSOR FOURTH-STAGE VANE ASSEMBLY | 1 | |
| 23037982 | FIXTURE--HOLDING, COMPRESSOR FIRST-, SECOND-, THIRD-, AND FOURTH-STAGE VANE ASSEMBLY | 1 | |
| 23037983 | FIXTURE--BLAST, COMPRESSOR FIRST-STAGE VANE AND BAND ASSEMBLY | 1 | |
| 23037984 | FIXTURE--BLAST, COMPRESSOR SECOND-STAGE VANE AND BAND ASSEMBLY | 1 | |
| 23037985 | FIXTURE--BLAST, COMPRESSOR THIRD-STAGE VANE AND BAND ASSEMBLY | 1 | |
| 23037987 | FIXTURE--SPRAY, COMPRESSOR CASE | 1 | |
| 23037988 | MASK--BLAST, COMPRESSOR CASE | 1 | |
| 23038050 | MASK--GLASS BEAD PEEN, COMPRESSOR FIRST-STAGE WHEEL MASKS THE FRONT AND REAR OF THE COMPRESSOR FIRST- STAGE WHEEL WHILE PEENING THE BLADES. | 1 | |
| 23038051 | MASK--GLASS BEAD PEEN, COMPRESSOR SECOND-STAGE WHEEL | 1 | |
| 23051155 | BELL AIR INLET COMPRESSOR | 1 | |
| 23051156 | FIXTURE – CONCENTRICITY, COMPRESSOR ROTOR - SUPERSEDES 6897434 | 2 | |
| 23051223 | Mask – Paint & Blast Compressor Case Bleed Valves. | 1 | |
| 23052522 | Puller – Compressor Aft Shaft Forward Rotor Seal | 1 | |
| 23052523 | Puller – Compressor Aft Bearing Inner Races & Forward Oil Impeller | 1 | |
| 23052542 | Support – Compressor Rotor Build | 1 | |
| 23052546 | Puller – Compressor Aft Bearing Outer Race | 1 | |
| 23052548 | Puller – Compressor Aft Shaft Aft Rotor Seal | 1 | |
| 23053554 | WRENCH, LOW--PRESSURE-- TURBINE AFT--BEARING AND SEAL | 1 | |
| 23053556 | PULLER, LOW-PRESSURE-TURBINE AFT--SUMP SEAL | 1 | |
| 23053585 | Pusher – Compressor Rear Stub Shaft | 1 | |
| 23053587 | Support – Compressor Rotor Measurement | 1 | |
| 23053588 | Adapter – Lift, Dummy Nut Compressor Aft | 1 | |
| 23053589 | Support – Compressor Rotor Aft | 1 | |
| 23053592 | Wrench & Holder – Compressor Aft Bearing Retaining Nut | 1 | |
| 23053593 | Adapter – Lift & Support, Gas Compressor Rotor Aft | 1 | |
| 23053597 | Separator – Compressor Wheel, Stage 14 From Compressor Cone Assembly | 1 | |
| 23053598 | Dimple Tool – Aft Compressor Cup Lock Washer | 1 | |
| 23053599 | Puller - Compressor, Rear Brush Seal | 1 | |
| 23053650 | Puller - Compressor, Rear Stub Shaft | 1 | |
| 23053651 | Separator – Compressor Wheel, Stages 1 & 2 | 1 | |
| 23053652 | Separator – Compressor Wheel, Stages 3, 4 & 5 | 1 | |
| 23053653 | Separator – Compressor Wheel, Stages 6, 7, 8 & 9 | 1 | |
| 23053654 | Separator – Compressor Wheel, Stages 9, 10, 11, 12 & 13 | 1 | |
| 23053680 | Fixture – Assembly, Wheel 2nd & 3rd Stage, Low Pressure Turbine Rotor | 1 | |
| 23053695 | Wrench & Holder, Low Pressure Turbine Forward Shaft, Fan Drive Shaft, Retaining Nut | 2 | |
| 23054764 | Plate – Buildup, 1st Stage Wheel Assembly, Low Pressure Turbine Rotor | 1 | |
| 23054765 | Plate – Buildup, 2nd Stage Wheel Assembly, Low Pressure Turbine Rotor | 1 | |
| 23054766 | Plate – Buildup, 3rd Stage Wheel Assembly, Low Pressure Turbine Rotor | 1 | |
| 23054770 | Puller – Compressor Stub Shaft, Air-seal & Spacer | 1 | |
| 23054836 | Lift – Horizontal, Balancing Compressor Rotor | 1 | |
| 23055250 | Guide - #4 Bearing, Aft Compressor Center Sump | 1 | |
| 23055268 | GAGE COMPRESSOR | 2 | |
| 23055273 | Adapter – Attaching Diffuser/Compressor To Turnover Stand | 1 | |
| 23055347 | FIXTURE INSPECTION FRONT COMPRESSOR SUPPORT | 1 | |
| 23055689 | Wrench & Holder – Compressor Front Spanner Nut | 1 | |
| 23055729 | Lift – Compressor Rotor Forward, | 1 | |
| 23055809 | Wrench and Holder, 8th Stage Compressor Vane Retaining Nut | 1 | |
| 23058405 | Fixture – Arbor Press, Separate Damper From No. 5 Bearing | 1 | |
| 23058450 | Roller Carriage Balance Compressor Rotor Assembly | 1 | |
| 23058452 | Dimple Tool – Cup Washer Lock, Compressor Tie Bolt | 1 | |
| 23058454 | Fixture – Turntable, Compressor Case Assembly | 1 | |
| 23058455 | Puller – Compressor to Turbine Shaft Liner | 1 | |
| 23058456 | Driver – Installation, Compressor To Turbine Shaft Liner | 1 | |
| 23058459 | Master – Dim “A” Set, Compressor Case Assembly | 1 | |
| 23058471 | HEATER, COMPRESSOR- WHELL EXPANSION | 1 | |
| 23058496 | Fixture – Compressor Case, Lathe Holding | 1 | |
| 23058497 | Adapter – Compressor Forward Shaft Holding | 1 | |
| 23060606 | Adapter – Drive Dog, Compressor Rotor Grind | 1 | |
| 23060701 | Dummy – Compressor Case | 1 | |
| 23060722 | Fixture – Spray, Compressor Vane Stages 6-13 | 1 | |
| 23060766 | Gage – Low Pressure Turbine 1st Stage Blade Track | 1 | |
| 23060769 | Gage – Low Pressure 2nd & 3rd Stage Vane Inner Honeycomb Seal | 1 | |
| 23063508 | Pusher – Brush Seal, Rear Compressor | 1 | |
| 23063510 | Fixture – Balance, Compressor Wheel Assembly | 1 | |
| 23063525 | ENGINE ADAPTER - COM-PRESSOR CLEANING CART | 6 | |
| 23066458 | COMPRESSOR CLEANING HOSE SET | 1 | |
| 23066648 | Gage – Master, Compressor Rotor | 1 | |
| 23068461 | Rings – Low Pressure Turbine Dummy Vane | 1 | |
| 23068488 | Fixture – Grinding, Air Seal, Rear Compressor | 1 | |
| 23068491 | Mask – Spray, Air Seal, Rear Compressor | 1 | |
| 23068498 | Adapter – Arbor Press, Plate Puller | 1 | |
| 23068504 | Fixture – Grind, Low Pressure Turbine, 1st Stage | 1 | |
| 23068528 | Fixture – Grinding, Compressor Forward Shaft | 1 | |
| 23068529 | Fixture – Grinding, Compressor Aft Shaft | 1 | |
| 23068538 | Heater – Compressor Rear Shaft | 1 | |
| 23068542 | Puller – High Pressure Turbine, Balance Mandrel | 1 | |
| 23068547 | Lift – Gas Generator To Compressor Module | 1 | |
| 23068548 | Lift – Module, Compressor Section | 1 | |
| 23068569 | Separator – Compressor Wheel Stage 1 | 1 | |
| 23068572 | Ring – Pilot, (Round Up) Compressor Case, Rear | 1 | |
| 23068573 | Ring – Pilot, (Round Up) Compressor Case, Front | 1 | |
| 23068577 | Separator – Compressor, Rear Cone Shaft | 1 | |
| 23068578 | Support – Compressor Rotor Assembly | 1 | |
| 23068580 | Puller – Compressor Tie Bolt Stretch | 1 | |
| 23068581 | Puller – Compressor to Turbine Shaft | 1 | |
| 23068585 | Support – Compressor Rotor Assembly, Forward Shaft | 1 | |
| 23068588 | Puller – Labyrinth Seal Compressor, Forward | 1 | |
| 23068599 | Fixture – Remove & Replace Compressor Cone Shaft Studs | 1 | |
| 23068615 | Adapter – Support, Compressor Rotor, Forward Shaft | 1 | |
| 23068616 | Wrench & Holder – Compressor Forward Spanner Nut | 1 | |
| 23068618 | Lift – Compressor Rotor Forward Shaft | 1 | |
| 23071491 | Gage – Master, Compressor Rotor | 1 | |
| 23094797 | PRESSURE GAUGE 0 TO 2.5 BAR | 1 | |
| 23700370 | PRESSURE TRANSDUCER | 1 | |
| 027550169 | Schrader 2755 High Pressure Strut Coupler - 38-24 Thread for 316 Fitting | 2 | |
| 30015030 | PNUEMATIC DE-ICER TESTING CONSOLE (PRESSURE BAR, TEMP C°) | 1 | |
| 30015031 | PNUEMATIC DE-ICER TESTING CONSOLE (PRESSURE BAR, TEMP F°) | 1 | |
| 31670509 | PROTECTIVE CAP - PRESSURE SWITH FITTING | 1 | |
| 32249001 | PRESSURE REDUCING VALVE | 1 | |
| 33329001 | HIHG PRESSURE PIPE | 1 | |
| 35300200 | HIGH PRESSURE REGULATOR | 1 | |
| 38581501 | PRESSURE SWITH | 1 | |
| 39540545 | 0-60 PSI PRESSURE GAUGE | 1 | |
| 39540561 | PRESSURE GAUGE | 1 | |
| 39540588 | PRESSURE GAUGE | 1 | |
| 39540618 | PRESSURE GAUGE | 1 | |
| 39540626 | PRESSURE GAUGE | 1 | |
| 39540634 | PRESSURE GAUGE | 1 | |
| 42627002 | CYLINDER ASSY. COMPRESSED GAS 5.95 KG CO2+ 0.17 KG N2 | 1 | |
| 44111524 | PRESSURE REGULATOR | 1 | |
| 48583082 | HEAVY DUTY PRESSURE HOSE | 1 | |
| 050070099 | Schrader 5007 High Pressure Strut Coupler - 716-20 Thread for 314 Fitting | 2 | |
| 50533789 | WIKA PRESSURE GAUGE: TYPE 232.53, DIAL SIZE 2 INCH, PRESSURE RANGE 15000 PSI, PROCESS CONN. ¼ INCH, | 1 | |
| 52555348 | WIKA Vacuum Negative Pressure Gauge Standard: US-Standard | 1 | |
| 54772058 | PRESSURE GAUGE, 300 PSI | 1 | |
| 56235400 | HIGH-PRESSURE HAND-OPERATED LEVER-TYPE GREASE GUN | 1 | |
| 057840099 | Schrader 5784 High Pressure Strut Coupler - 716-20 thread for 14 tube - 5,000 PSIG | 2 | |
| 60101110 | COMPRESSION RIVETER - ALLIGATOR JAW TYPE | 1 | |
| 60102110 | COMPRESSION RIVETER C-YOKE TYPE | 1 | |
| 60103110 | COMPRESSION RIVETER C-YOKE TYPE RB42 (RECOULES) | 1 | |
| 061160001 | Schrader 6116 High Pressure Strut Coupler - 18 NPT Female - 3,000 PSIG | 2 | |
| 66051405 | RIG, FUEL PRESSURE TEST/INHIBITING | 1 | |
| 67202815 | WIKA - PRESSURE GAUGE SIZE 2.5" X 1/4", CAP. 0-100 PSI | 1 | |
| 74140000 | 11068-PISTON RING COMPRESSORS | 1 | |
| 74140001 | 11068.1-PISTON RING COMPRESSOR SIZE 1 | 1 | |
| 74140003 | 11068.2-PISTON RING COMPRESSOR SIZE 2 | 1 | |
| 74140005 | 11068.3-PISTON RING COMPRESSOR SIZE 3 | 1 | |
| 0074908150 | PRESSURE-REDUCING VALVE ASSY,ADJUSTED | 1 | |
| 0076485020 | PRESSURE SWITCH ASSY | 1 | |
| 081302500 | 081302500 1/2" REGULATOR WITHOUT PRESSURE GAUGE 1 | 1 | |
| 82500580 | HIGH PRESSURE REGULATOR | 1 | |
| 83000136 | HEAT SINK, PRESSURE SWITCH | 1 | |
| 87400054 | GENERATOR-PRESSURE,PITOT STATIC TEST | 1 | |
| 90804024 | PRESSURE SWITCH | 1 | |
| 104060171 | PRESSURE GAUGE 4"; 0-400 BAR 2ND SCALE PSI, G1/2B LOWER BACK MOUNT | 1 | |
| 104060177 | PRESSURE GAUGE 2.5"; 0-10 BAR 2ND SCALE PSI, G1/4B CENTER BACK MOUNT | 1 | |
| 124130999 | PRESSURE REGULATOR–MANOMETER BLOCK | 1 | |
| 00162000200 | COMPRESSOR MODULE SHIPPING CONTAINER | 1 | |
| 0174025120 | PRESSURIZING VALVE | 1 | |
| 201440205 | EYE END # OUTER TUBE, COMPRESSION SPRING | 1 | |
| 224816000 | PRESSURE BALL | 1 | |
| 0292149990 | WHEEL ASSY,AXIAL COMPRESSOR,DRESSED | 1 | |
| 0292150080 | WHEEL ASSY,AXIAL COMPRESSOR | 1 | |
| 0292150090 | WHEEL ASSY,AXIAL COMPRESSOR,DRESSED | 1 | |
| 0292150450 | COMPRESSOR CASING | 1 | |
| 0292158320 | CASING, COMPRESSOR | 1 | |
| 0292158340 | CASING,COMPRESSOR | 1 | |
| 0292158360 | COMPRESSOR CASING | 1 | |
| 0292158490 | CASING,COMPRESSOR | 1 | |
| 0292260610 | COMPRESSOR CASING | 1 | |
| 0292687260 | PIPE,P3 PRESSUR.,PT LABYRINTH | 1 | |
| 0292687290 | PIPE,P3 PRESSUR.,PT LABYRINTH | 1 | |
| 0292687310 | PIPE,P3 PRESSUR.,FT LABYRINTH | 1 | |
| 0292687410 | PIPE,P3 PRESSUR.,PT LABYRINTH | 1 | |
| 0298180030 | COMPRESSION SPRING | 1 | |
| 0298561600 | RING,COMPRESSION | 1 | |
| 0298717370 | SUPPORT,PRESSURIZATION PIPE | 1 | |
| 0298737950 | PIPE,FUEL,EXCHANGER-PRESSURIZING VALVE | 1 | |
| 0298908020 | PUMP ASSY,LOW PRESSURE,ADJUSTED | 1 | |
| 0301020010 | P2 PRESS.TL. BEAR. PIPE | 1 | |
| 0301020600 | CONNECTOR,MULTIPLE,FLUID PRESSU | 1 | |
| 0319111310 | BODY,PRESSURE PUMP | 1 | |
| 0319117770 | VALVE,PRESSURE RELIEF | 1 | |
| 0319707120 | UNIT,COMPRESSOR WASHING | 1 | |
| 0319707160 | COMPRESSOR WASHING DUCT | 1 | |
| 0319730320 | PIPE,FUEL,PRESSURE DELTA RETURN | 1 | |
| 0319738040 | PIPE,FUEL,PRESSURE PUMP | 1 | |
| 0319900010 | PRESSURE-REDUCING VALVE ASSY,ADJUSTED | 1 | |
| 0322718700 | PIPEANTI-ICING PRESSURE | 1 | |
| 0356710050 | P3 AIR PRESSURE SENSOR ADAPTER | 1 | |
| 369029985 | BUNGEE SPRING COMPRESSION TOOL ROD AND CHANNEL (PIN 369029985) | 1 | |
| 401333001 | VALVE-PRESSURE RELIEF | 1 | |
| 0421950060 | EN-RESSORT DE COMPRESSION | 1 | |
| 0421950380 | COMPRESSION SPRING | 1 | |
| 439005134 | PRESSURE TEST KIT | 1 | |
| 439005135 | DOOR PRESSURE TEST SET | 1 | |
| 439005136 | INNER OVEN PRESSURE TEST SET | 1 | |
| 439005149 | DOOR PRESSURE TEST KIT (POST SIL NO. H0212-25-0278) | 1 | |
| 439009074 | TEST KIT, PRESS VLV | 2 | |
| 460001794 | PRESSURE TEST BUNG | 1 | |
| 460001796 | PRESS.TEST ADAPTER | 1 | |
| 460001997 | PRESS PAD | 1 | |
| 460001998 | BASE SUPPORT AND PRESS PAD | 1 | |
| 460002003 | PRESS PAD | 1 | |
| 460002014 | PRESS PAD | 1 | |
| 460002348 | F100 PAD-PRESS NG SLIDING | 1 | |
| 460002459 | SPRING COMPRESSOR | 1 | |
| 460002929 | PRESS TEST FIXTURE | 1 | |
| 460002958 | SPRING COMPRESSOR | 1 | |
| 460004330 | PRESS PAD | 2 | |
| 460004493 | SPRING COMPRESSOR | 1 | |
| 460004695 | Compressor-side stay spring | 1 | |
| 460004743 | PRESS PAD | 1 | |
| 460004772 | PRESS PAD | 1 | |
| 460004843 | PRESS PAD | 1 | |
| 460004850 | PRESS PAD | 1 | |
| 460004852 | PRESS PAD | 1 | |
| 460004865 | PRESS PAD | 1 | |
| 460004869 | PRESS PAD | 1 | |
| 460004871 | PRESS PAD | 1 | |
| 460004873 | PRESS PAD | 1 | |
| 460004933 | PRESS PAD | 1 | |
| 460004935 | PRESS PAD | 1 | |
| 460004939 | PRESS PAD | 1 | |
| 460005069 | PRESS PAD | 1 | |
| 460005549 | PRESS PAD | 1 | |
| 460005550 | PRESS PAD | 1 | |
| 460005622 | PRESS PAD AND BASE | 1 | |
| 460005813 | PRESS PAD | 1 | |
| 460005848 | TENSION COMPRESSION TEST RIG | 1 | |
| 460005877 | PRESS PAD | 1 | |
| 460006125 | MANIFOLD PRESSURE TEST RIG FIXTURE | 1 | |
| 460006134 | PRESS PAD | 1 | |
| 460006168 | PRESS PAD | 1 | |
| 460006229 | PRESS PAD | 2 | |
| 460006233 | PRESS ADAPTER | 4 | |
| 460006238 | PRESS PAD ASSEMBLY | 2 | |
| 460006243 | PRESS PAD AND DRAWBOLT | 6 | |
| 460006244 | PRESS PAD ASSEMBLY | 1 | |
| 460006250 | PRESS PAD ASSEMBLY | 6 | |
| 460006251 | PRESSPAD | 5 | |
| 460006254 | PRESS PAD ASSEMBLY | 1 | |
| 460006256 | PRESS PAD ASSEMBLU | 1 | |
| 460006258 | PRESS PAD | 2 | |
| 460006259 | PRESS PAD | 3 | |
| 460006260 | PRESS PAD | 2 | |
| 460006265 | PRESS PAD | 5 | |
| 460006267 | PRESS PAD ASSEMBLY | 6 | |
| 460006268 | PRESSPAD | 6 | |
| 460006444 | ALIGNMENT BAR AND PRESS PAD ASSEMBLY | 5 | |
| 460006445 | ALIGNMENT PRESS | 5 | |
| 460006446 | ALIGNMENT PRESS | 7 | |
| 460006447 | ALIGNMENT BAR AND PRESS PAD ASSEMBLY | 5 | |
| 460006449 | ALIGNMENT PRESS | 5 | |
| 460006450 | ALIGNMENT BAR AND PRESS PAD ASSEMBLY | 4 | |
| 460006453 | PAD - PRESS | 10 | |
| 460006470 | PRESSURE TEST FIXTURE | 1 | |
| 460006482 | PRESS ADAPTOR | 1 | |
| 460006488 | PRESS ADAPTOR | 1 | |
| 460006495 | PAD-PRESS,ASSY | 2 | |
| 460006496 | BOTTOM PRESS | 6 | |
| 460006499 | PRESS PAD | 1 | |
| 460006501 | PRESS PAD | 1 | |
| 460006504 | PRESS PAD | 1 | |
| 460006513 | SPRING COMPRESSOR | 1 | |
| 460006520 | SPRING COMPRESSOR | 1 | |
| 460006582 | PRESS PAD | 1 | |
| 460006595 | PRESS PAD | 1 | |
| 460006599 | BOTTOM PRESS ADAPTER | 1 | |
| 460006600 | PRESS PAD ASSEMBLY | 8 | |
| 460006603 | PRESS PAD ASSEMBLY | 9 | |
| 460006611 | PRESS ADAPTER | 1 | |
| 460006612 | PRESS ADAPTER | 1 | |
| 460006614 | PRESSPAD | 7 | |
| 460006615 | PRESS PAD | 1 | |
| 460006618 | PRESS PAD | 1 | |
| 460006619 | PRESS PAD | 1 | |
| 460006620 | PRESS PAD | 2 | |
| 460006623 | PRESS PAD AND DRAWBOLT | 1 | |
| 460006624 | PRESS PAD AND DRAWBOLT | 1 | |
| 460006625 | PRESS PAD AND DRAWBOLT | 1 | |
| 460006626 | PRESS PAD AND DRAWBOLT | 1 | |
| 460006931 | PRESS PAD | 1 | |
| 460006939 | PRESS PAD | 1 | |
| 460006940 | PRESS PAD | 1 | |
| 460006941 | PRESS PAD | 1 | |
| 460006956 | PRESS PAD | 1 | |
| 460006957 | PRESS PAD AND SUPPORT | 1 | |
| 460006959 | PRESS PADS AND SUPPORT | 1 | |
| 460006967 | PRESS PAD | 1 | |
| 460007091 | PRESS PAD | 1 | |
| 460007092 | PRESS PAD | 1 | |
| 460007169 | COMPRESSOR - SPRING | 8 | |
| 460007191 | PRESS PAD | 1 | |
| 460007202 | SPRING COMPRESSOR | 2 | |
| 460007245 | PRESS PAD | 3 | |
| 460007246 | SPRING COMPRESSOR | 2 | |
| 460007248 | SPRING COMPRESSOR | 5 | |
| 460007250 | ALIGNMENT BAR AND PRESS PAD ASSEMBLY | 2 | |
| 460007251 | ALIGNMENT BAR AND PRESS PAD ASSEMBLY | 1 | |
| 460007256 | SPRING COMPRESSOR | 5 | |
| 460007257 | PRESS PAD | 7 | |
| 460007258 | PAD-PRESS | 3 | |
| 460007260 | BOTTOM PRESS ADAPTOR | 1 | |
| 460007296 | SPRING COMPRESSOR | 1 | |
| 460007300 | PRESSPAD | 1 | |
| 460007301 | PAD-PRESS,DRAWBOLT | 1 | |
| 460007348 | COMPRESSOR-SPRING | 1 | |
| 460007349 | COMPRESSOR-SPRING | 2 | |
| 460007384 | TOP PRESS ADAPTER | 2 | |
| 460007501 | PRESS PAD | 1 | |
| 460007502 | PRESS PAD | 1 | |
| 0465700530 | COMPRESSOR WASHING PIPE | 1 | |
| 0465710110 | TL1 RING PRESSURIZATION PIPE | 1 | |
| 0465730120 | FUEL PIPE TO PRESSURISATION VALVE | 1 | |
| 0465730870 | PRESSURIZATION VALVE COVER | 1 | |
| 526640019 | HIGH PRESSURE REDCR | 1 | |
| 526640035 | PRESSURE REGULATOR N2 0-20 BAR | 1 | |
| 526640361 | TIRE PRESSURE TESTER 0-18 BAR /0-260 PSI | 1 | |
| 537200056 | Combined Airflow Pressure/Vacuum CartLHT Dwg No.(537200056) | 1 | |
| 537207051 | PRESS GAUGE | 1 | |
| 567519001 | TYRE PRESSURE GAUGE | 1 | |
| 0620710170 | PIPE,AIR BLEED VALVE P3 PRESSURE | 1 | |
| 0620900060 | PUMP ASSY,LOW PRESSURE,ADJUSTED | 1 | |
| 622008900 | MANUAL PRESS FOR MICRO-D BACKSHELL CRIMP TOOL KIT, 9 CIRCUITS | 1 | |
| 0638258200 | CRIMP PRESSES AND CRIMP HAND TOOLS | 1 | |
| 0701300017 | LOW PRESSURE NITROGEN REGULATOR | 1 | |
| 710014101 | A/C TYRE PRESSURE EQPT | 1 | |
| 814157000 | TANK PRESSURE GENERATOR | 1 | |
| 0840490013 | ENGINE COMPRESSOR WASHER | 12 | |
| 937220448 | PRESS GAUGE (LG STRUT) | 1 | |
| 937220449 | PRESS GAUGE (TYRE) | 1 | |
| 1107440240 | TIRE PRESSURE GAUGES 0 / 400 PSI | 1 | |
| 1462141000 | COMPRESSOR | 2 | |
| 1468056010 | GAUGE A/C STRUT PRESSURE | 20 | |
| 1503252705 | TYRE PRESSURE GUAGE | 1 | |
| 1610133116 | DRILL PRESS | 1 | |
| 2500014489 | EN-DISQUE COMPRESSEUR BP1 | 1 | |
| 2500015179 | EN-DISQUE COMPRESSEUR BP2 | 1 | |
| 3376088001 | PRESSURE TRANSDUCER C-1000 BAR (EMBRAER) | 1 | |
| 4131383327 | GAUGE PRESSURE | 1 | |
| 4133801030 | WHEEL PRESSURE TRANSDUCER | 1 | |
| 4305901210 | PRESSURE SENSOR HOLDER | 1 | |
| 4305901220 | PRESSURE SENSOR HOLDER | 1 | |
| 4305990071 | PRESSURE INDICATOR | 2 | |
| 4600067169 | SPRING COMPRESSOR | 1 | |
| 4600067202 | SPRING COMPRESSOR | 1 | |
| 4600067256 | SPRING COMPRESSOR | 1 | |
| 7010393905 | 3M W-3197 Low Pressure Air Regulating Kit | 1 | |
| 7100141012 | A/C TYRE PRESSURE EQPT. | 1 | |
| 8161008068 | AIR COMPRESSOR (07 BAR) | 1 | |
| 8618480000 | PRESSURE GENERATOR | 1 | |
| 8813734000 | PRESS IN AND PUT OUT DEVICE | 1 | |
| 8814157000 | TANK PRESSURE GENERATOR | 2 | |
| 8814768000 | INSPECTION TEMPLATE ASSY FOR AXIAL COMPRESSOR BLADES | 1 | |
| 8815099604 | TAP PRESSURE | 1 | |
| 8816183000 | PRESSURE GENERATOR | 2 | |
| 8816183137 | PRESSURE GAUGE;UNION | 1 | |
| 8816183143 | PRESSURE GAUGE | 1 | |
| 8816183147 | PUMP WITH PRESSURE LIMITER | 1 | |
| 8816540000 | OIL PRESSURE TAPPING TUBE | 1 | |
| 8817027000 | TUBE, OIL PRESSURE TAPPING | 1 | |
| 8818337000 | OIL PRESSURE TOOL | 1 | |
| 8818457000 | POCKET DIGITAL PRESSURE GAUGE | 1 | |
| 8818480000 | PRESSURE GENERATOR | 1 | |
| 8818870000 | GENERATING TOOL HYDRAULIC PRESSURE | 1 | |
| 8818919000 | HARNESS;PRESSURESWITCH | 1 | |
| 8819387000 | TOOL USED TO DO INSPECTION AND CHECK PROCEDURES OF THE PRESSURE SWITCHES. | 4 | |
| 8819389000 | CONNECTOR FITTING FOR THE LOW-FUEL PRESSURE SWITCH | 5 | |
| 8819681000 | SET OF WRENCHES FOR AXIAL COMPRESSOR ASSEMBLY | 2 | |
| 8819795000 | HYD PRESSURE ADAPTER | 3 | |
| 9096952100 | AIR COMPRESSOR RECEIVER TANK, 270 LTS. (RCT270-2) | 1 | |
| 9421000600 | P3 PRESSURE TRANSDUCER | 1 | |
| 9421000800 | OIL - FUEL PRESSURE TRANSDUCER | 1 | |
| 9421001000 | OIL PRESSURE AND TEMPERATURE TRANSDUCER | 1 | |
| 11111684000 | GAUGE, 4000 PSI PRESSURE | 1 | |
| 18000100104 | ARBOR PRESS | 1 | |
| 18903630000 | PRECISION PRESSURE MONITOR | 1 | |
| 18905810000 | PRECISION PRESSURE CONTROLLER-MONITOR | 1 | |
| 18906010000 | PRECISION PRESSURE ALTITUDE CONTROLLER | 1 | |
| 18960860000 | PRECISION PRESSURE CONTROLLER | 1 | |
| 4910015017972 | DIGITAL TYRE PRESSURE GUAGE | 1 | |
| 4920001526651 | WAVE GUIDE PRESSURE TESTER | 1 | |
| 4920011450163 | BRAKE PRESSURE TEST | 1 | |
| 4920012417454 | FWD PRESSURE, FLUSH FIXTURE, STAGE 1 ROTOR | 1 | |
| 4920012417455 | FWD PRESSURE, FLUSH FIXTURE, STAGE 2 ROTOR | 1 | |
| 4940011856215 | CLEANER, PRESSURE, SO | 1 | |
| 5620017139987 | GAUGE: TIRE PRESSURE | 1 | |
| 6685001024803 | AIRCRAFT PRESSURE GAUGE | 1 | |
| 6685005068882 | TIRE GAUGE HIGH PRESSURE | 1 | |
| 860135950100000 | SIMULATOR - ENGINE OIL LOW PRESSURE | 1 | |
| 860135964100000 | SIMULATOR-FUEL PUMPS LP PRESSURE SWITCHES | 1 | |
| 89-M840 | HAND PRESS (MODEL 840) | 1 | |
| 890-2 | SOUND PRESSURE LEVEL CALIBRATOR (SIMPSON) | 10 | |
| 890.100-00 | HIGH PRESSURE WALK ROUND NITROGEN CHARGE KIT P | 1 | |
| 890.100.00 | HIGH PRESSURE WALK AROUND NITROGEN KIT | 1 | |
| 893200-3 | NITROGEN HIGH PRESSURE CART | 1 | |
| 89391-000 | GAGE, FEELER, (PRESSURE ROLLER ALIGNMENT) | 1 | |
| 8943-0-2000 | Bearing Press Fixture | 1 | |
| 895-3130-02-101 | PRESSING TOOL,BUSHING | 1 | |
| 8955-0-2000 | Bearing Press Fixture | 1 | |
| 897542-7 | SWITCH-BETA PRESSURE | 1 | |
| 897542-8 | SWITCH-BETA PRESSURE | 1 | |
| 8993144-829-FF | PRESSURE GAGE | 1 | |
| 8993144-829-FF 1500PSI | PRESSURE GAUGE | 1 | |
| 8993160-829-FF | PRESSURE GAGE | 1 | |
| 8993160-829-FF 3000PSI | PRESSURE GAUGE | 1 | |
| 8993186-829-FF | PRESSURE GAGE | 1 | |
| 8993186-829-FF 6000PSI | PRESSURE GAUGE | 1 | |
| 8999/2 | Gauge Pressure 4000 PSI | 1 | |
| 8999/6 | Gauge Pressure 4000 PSI | 1 | |
| 89DPG | DIGITAL PRESSURE GAUGE | 1 | |
| 89DPG-1001 | DIGITAL PRESSURE GAUGE 0-360 PSI | 1 | |
| 89ED03545-1 | PRESS TEST PLATE_[89ED03545-1] | 1 | |
| 89ED03545-2 | PRESS TEST PLATE_[89ED03545-2] | 1 | |
| 89ED03549 | PRESS TEST PLATE_[89ED03549] | 1 | |
| 8BC345 | BOTTLE - NITROGEN CART - SERVICING, STRUT OIL INFLATOR - STRUT, LANDING GEAR GAUGE - PRESSURE, 0-3000 PSIG (0-20685 KPA) WRENCH - TORQUE BUCKET - 2.5 GALLON CAPACITY | 1 | |
| 8C2151 | FIXTURE, BUILD-UP - COMPRESSOR FWD STATORS | 1 | |
| 8C2157 | GAGE, LOCKING LUG - COMPRESSOR ROTOR ASSEMBLY | 1 | |
| 8C2188 | FIXTURE, LIFT - COMPRESSOR STATOR RINGS | 1 | |
| 8C2189 | FIXTURE, SUPPORT - AFT COMPRESSOR INNER STATOR ASSEMBLY | 1 | |
| 8C2213 | ADAPTER SET, MANIFOLD PRESSURE CHECK – FUEL | 1 | |
| 8C2405 | FIXTURE, PUSH/PULL-LOW PRESSURE TURBINE MODULE & FAN MODULE | 1 | |
| 8C2720 | FIXTURE,RESTRAIN - COMPRESSOR ROTOR, AFT (SERVICE SHOP TOOL ONLY) | 1 | |
| 8C2760 | FIXTURE, BUILD-UP - COMPRESSOR MODULE | 1 | |
| 8C3191 | FIXTURE - RESTRAINING - LOW PRESSURE TURBINE CASE | 1 | |
| 8C3453 | COVER - OIL PRESSURE TEST - AGBX - PMA | 1 | |
| 8C3454 | COVER - OIL PRESSURE TEST - AGBX - ATS | 1 | |
| 8C3455 | COVER - OIL PRESSURE TEST - AGBX - HP1 - HP2 | 1 | |
| 8C3456 | COVER - OIL PRESSURE TEST - AGBX - LP | 1 | |
| 8C3457 | COVER - OIL PRESSURE TEST - AGBX - ATS | 1 | |
| 8C3460 | COVER - OIL PRESSURE TEST - AGBX - FP | 1 | |
| 8C3562 | COVER - OIL PRESSURE TEST - TGBX - SUPPORT HORIZONTAL | 1 | |
| 8C4115 | FIXTURE - REMOVE - BLADE LOW PRESSURE COMPRESSOR | 1 | |
| 8C4118 | FIXTURE - STOCK - BLADE LOW PRESSURE COMPRESSOR | 1 | |
| 8F | PRESSURE BLANK TOOL | 1 | |
| 8M | PRESSURE BLANK TOOL | 1 | |
| 8MIT65B01503 | TOOL, COMPRESSION - CAP RING, ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 3 | |
| 8XHBU-SS | ADAPTER - PRESSURE (1/2-INCH FLARELESS FITTING AT ONE END AND 1/2-INCH 37-DEGREE FLARED FITTING AT THE OTHER END) | 4 | |
| 9-214033-1 | NIIN 009773349 WRENCH PRESS AD | 1 | |
| 90-555039-5 | COMPRESSOR ASSEMBLY | 1 | |
| 90-900-1052 | GAUGE -B737NG HYD RESERVOIR PRESS | 2 | |
| 901018-1 | CABIN PRESSURE CONTROL TEST | 1 | |
| 901018-2 | CABIN PRESSURE CONTROL TEST | 1 | |
| 901018-2-2 | TESTER-CABIN PRESSURISATION | 1 | |
| 902249-1 | ADAPTER PRESSURISATION | 1 | |
| 904.21.06.623 | CORROSION TREATMENT EQUIPMENT, PRESSURE CUP | 1 | |
| 905008-1 | Bearing Press Set | 1 | |
| 905542-1-1 | PULLER COMPRESSOR INLET ASSEMBLY | 1 | |
| 905696-1-1 | FIXTURE ALIGNMENT AND PRESSING | 1 | |
| 9056A0022-01 | CABIN PRESSURE REGULATOR VALVE RING | 1 | |
| 907876-1-1 | BUSHING AND STATOR PRESSING FIXTURE | 1 | |
| 90841-3 | NSN 6685-00-703-6811/ GAUGE PRESSURE | 1 | |
| 90970-1 | INTENSIFIER - PNEUMATIC PRESSURE | 1 | |
| 90970-2 | INTENSIFIER, OXYGEN PRESSURE | 5 | |
| 90970−1 | Intensifier − Pneumatic Pressure | 1 | |
| 909C402-1 | Checking Brush Spring Pressure | 1 | |
| 90G97 | SWITCH-PRESS | 1 | |
| 9104A0009-02 | SENSOR PRESSURE | 1 | |
| 9106A0003-01 | PRESSURE SENSOR | 1 | |
| 9106A0003-02 | DIFF PRESSURE SENSO | 4 | |
| 9106A0005-01 | PRESSURE TRANSDUCER | 1 | |
| 9106A0006-02 | SENSOR PRESSURE DIFF | 4 | |
| 9126-01 | PRESSURE GAUGE_0 ~ 200 PSI_[9126-01] | 1 | |
| 916392-1 | TESTER PRESSURIZED | 1 | |
| 916392-1-1 | CABIN PRESSURIZATION DIGITAL | 1 | |
| 916392-3-1 | Digital Cabin Pressure Control System Tester | 1 | |
| 916392.1.1 | CABIN PRESSURE SYSTEM TESTER | 1 | |
| 9164-01 | PRESSURE GAUGE_0 ~ 200 PSI_[9164-01] | 1 | |
| 916884-1-1 | CABINE PRESSURE SYSTEM SIMULATOR TEST BOX | 1 | |
| 916891-1 | PRESSURE TEST CAP | 1 | |
| 917.97.41.065 | HOSE, LOWER PRESSURE | 1 | |
| 91V100-0-160BAR-1/2NPTBTM | GAUGE PRESSURE 0-160 BAR 100 MM FACE 1/2 - MFG: IFG DE WIT BV - P/N# 91V100-0-160BAR-1/2NPTBTM | 1 | |
| 91V100-3000-N | 1.) PRESSURE GAUGE, GLYCERINE FILLED, 4 INCH SS, 0 - 3000 PSI/BAR, 1/2 INCH MALE NPT, NACE, IFG DE WIT BV | 1 | |
| 91V63-0-10000PSI-1/4NPTBTM | GAUGE PRESSURE 0-10,000 PSI 63 MM FACE 1 - MFG: IFG DE WIT BV - P/N# 91V63-0-10000PSI-1/4NPTBTM | 1 | |
| 91V63-0-1000PSI-1/4NPTBTM | GAUGE PRESSURE 0-1000 PSI 63 MM FACE 1/4 - MFG: IFG DE WIT BV - P/N# 91V63-0-1000PSI-1/4NPTBTM | 1 | |
| 91V63-0-10BAR-1/4NPTBTM | GAUGE, PRESSURE 0-10 BAR 63 MM FACE 1/4 - MFG: IFG DE WIT BV - P/N# 91V63-0-10BAR-1/4NPTBTM | 1 | |
| 91V63-0-2000PSI-1/4NPTBTM | GAUGE PRESSURE 0-2000 PSI 63 MM FACE 1/4 - MFG: IFG DE WIT BV - P/N# 91V63-0-2000PSI-1/4NPTBTM | 1 | |
| 91V63-0-250BAR-1/4NPTBTM | GAUGE, PRESSURE 0-250 BAR 63 MM FACE 1/4 - MFG: IFG DE WIT BV - P/N# 91V63-0-250BAR-1/4NPTBTM | 1 | |
| 91V63-0-4BAR-1/4NPTBTM | GAUGE, PRESSURE 0-4 BAR 63 MM FACE 1/4 I - MFG: IFG DE WIT BV - P/N# 91V63-0-4BAR-1/4NPTBTM | 1 | |
| 91V63-0-5000PSI-1/4NPTBTM | GAUGE PRESSURE 0-5000 PSI 63 MM FACE 1/4 | 1 | |
| 92-001-50 | TPS TIRE PRESSURE SENSOR | 1 | |
| 9217M40P13 | PRESSURE PROBE P49 | 1 | |
| 925ARS-20-N | LOW PRESSURE REGULATOR (NITROGEN) | 1 | |
| 925ARS40N2578 | LOW PRESSURE REGULATOR (NITROGEN) | 1 | |
| 928A675-1 | PRESS ADAPTER | 1 | |
| 928A690-1 | PRESS TOOL SPACER | 1 | |
| 92A99101-8 | Global Express Jack Pad - Qty 1 | 3 | |
| 92TD03005 | FUEL SYS PRESS TEST | 1 | |
| 93-004 | PRESSURE REGULATOR | 1 | |
| 9323-020 | BEAD PRESS TIRE - COLUMBUS JACK | 1 | |
| 932A218-1 | ADAPTER, PRESS | 1 | |
| 932A219-1 | ADAPTER, PRESS | 1 | |
| 933A305-1 | PILOT COMPRESSION TOOL | 1 | |
| 934-1 | BARCOL – IMPRESSOR | 1 | |
| 939-2 | 02 SYSTEM TEST EQUIPMENT PRESSURE GAGE (0 TO 100 PSI) (MM 35-00-00 / 20-52-00) | 2 | |
| 94/10/EC | GAUGE - PRESSURE, 0-30 PSIG, /-0.5% ACCURACY | 1 | |
| 94/9/EC | GAUGE - PRESSURE, 0-60 PSIG, /-0.5% ACCURACY | 1 | |
| 94125K472 | COMPRESSION SPRING | 1 | |
| 94125K711 | Compression Spring Music Wire 18mm Overall 12mm OD 200mm Wire | 1 | |
| 94125K815 | METRIC COMPRESSION SPRING 44.5 LG X 11.25 OD X 1.25 WIRE | 1 | |
| 9435K141 | STAINLESS STEEL COMPRESSION SPRING | 1 | |
| 9441M11 | PLUG, PRESSURE TEST | 1 | |
| 9441M11G01 | PLUG, PRESSURE TEST | 1 | |
| 9441M60 | PLUG, PRESSURE TEST | 1 | |
| 9441M60G01 | PLUG, PRESSURE TEST | 1 | |
| 9446M61G02 | FIXTURE, LIFT - COMPRESSOR STATOR CASE, UPPER, SET | 1 | |
| 9448M84G01 | PEDESTAL SUPPORT-COMPRESSOR REAR FRAME | 1 | |
| 9456007-FF | PRESSURE GAGE | 1 | |
| 9456007-FF 600PSI | PRESSURE GAUGE | 1 | |
| 9457M48 | MANIFOLD PRESSURE, 8PT CELL | 1 | |
| 9457M50 (G02) | PROBE, PITOT STATIC PRESSURE - BELLMOUTH | 1 | |
| 9457M50G02 | BELLMOUTH PRESSURE PROBE | 1 | |
| 9461M18G02 | FIXTURE PRESSURE CHECK | 1 | |
| 9480M20G03 | PRESSURE TEST TOOL | 1 | |
| 9480M65G01 | CLOSURE SET PRESSURE TEST | 1 | |
| 9485M28 | FIXTURE, PRESSURE TEST - ACCESSORY GEARBOX | 1 | |
| 9486M85 | FIXTURE - PRESSURE TEST | 1 | |
| 94894-1081 | PRESSURE GUAGE | 1 | |
| 95-0600-150 | DYNAMIC PRESSURE PIPE CAHNGEOVER JOINT | 1 | |
| 95-92 | PRESSURE GAUGE KIT - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 95-92030-0001 | PRESSURE GAUGE KIT | 1 | |
| 95-92030-0003 | PRESSURE GAUGE KIT | 1 | |
| 95-92123-0001 | NLG SPRING COMPRESSION | 1 | |
| 95-92134-0001 | PRESSURE GAUGE KIT | 1 | |
| 95-92134-0001, UNIK5000 | PTX50A2-TB-A1-CA-H1-PE, PRESSURE SENSOR | 1 | |
| 95-92134-0001 | PRESSURE GAUGE KIT - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 95-92160-0001 | TENSILE-COMPRESSION DYNAMOMETER | 1 | |
| 95-92290-0001 | AIR CONDITIONING COMPRESSORS OUTLETS CAP | 1 | |
| 950-006 | 1 ADAPTER FOR TIRE PRESSURE GAUGE (PN | 1 | |
| 9501501-4000 | TBD/PRESSURE GAUGE 9501501-4000 | 22 | |
| 952-562 | VALVE: RELIEF,PRESSURE, | 2 | |
| 952-563 | VALVE: RELIEF,PRESSURE, | 2 | |
| 9550000373 | P3 PRESSURE TRANSDUCER | 1 | |
| 9550000374 | OIL PRESSURE AND TEMPERATURE TRANSDUCER | 1 | |
| 9550000376 | OIL - FUEL PRESSURE TRANSDUCER | 1 | |
| 9550000900 | TRANSMITTER,PRESSURE TEMPERATURE | 1 | |
| 9550001900 | PRESS SWITCH PRE-CLOGGING | 1 | |
| 9550002000 | OIL FILTER PREBLOCKAGE PRESSURE SWITCH | 1 | |
| 9550124270 | SWITCH,LOW OIL PRESSURE | 1 | |
| 9550155230 | PRESSURE SWITCH, MIN.PH | 1 | |
| 9550155830 | TRANSMITTER, FUEL PRESS | 1 | |
| 9550155840 | TRANSMITTER,OIL PRESSURE | 1 | |
| 9550162490 | PRESSURE SWITCH | 1 | |
| 9550165380 | PRESSURE TRANSMITTER | 1 | |
| 9550165750 | PRESSURE TRANSMITTER | 1 | |
| 9550169050 | SWITCH,LOW OIL PRESSURE | 1 | |
| 9550170040 | SWITCH,LOW OIL PRESSURE | 1 | |
| 9550170280 | SWITCH,LOW FUEL PRESSURE | 1 | |
| 9550170360 | TRANSMITTER,TORQUEMETER PRESSURE | 1 | |
| 9550170370 | TRANSMITTER,PRESSURE TEMPERATURE | 1 | |
| 9550170830 | SWITCH,LOW OIL PRESSURE | 1 | |
| 9550171420 | TRANSMITTER,PRESSURE P3 | 2 | |
| 9550171460 | FILTRE PREBLOCKAGE PRESSURE SWITCH | 1 | |
| 9550172000 | PRESSURE SWITCH,F.FILTER | 2 | |
| 9550176240 | COUPLE PRESS TRANSMITTER | 2 | |
| 9550177750 | OIL PRES PRESS TRANSMI | 1 | |
| 9550178050 | TRANSMITTER,OIL PRESSURE | 1 | |
| 9550178650 | SWITCH,PRESSURE ANTI-ICING | 1 | |
| 9550179130 | SWITCH,LOW FUEL PRESSURE | 1 | |
| 9550179145 | SWITCH,LOW FUEL PRESSURE | 1 | |
| 9550179560 | LOW FUEL PRESSURE SWITCH | 1 | |
| 9550194270 | SWITCH,LOW OIL PRESSURE | 1 | |
| 9550757320 | DBLE PRESSURE AND TEMPERATURE TRANSDUCER | 1 | |
| 9550758110 | FLUID PRESSURE AND TEMP TRANSDUCER | 1 | |
| 9550758460 | DBLE PRESSURE AND TEMPERATURE TRANSDUCER | 1 | |
| 9560004800 | EN-CLAPET DE SURPRESSION HUILE | 1 | |
| 9560137630 | PRESSURE SWITCH | 1 | |
| 9560150680 | PRESSURE-SWITCH PRE.CLOG | 1 | |
| 9565-P | VELOCICALC VENTILATION METER WITH DIFFERENTIAL PRESSURE SENSOR | 1 | |
| 956A1105 | DRIVER - NUT STARTING - COMPRESSOR ROTOR STAGE 3-4 FLANGE BOLTS | 1 | |
| 956A1148 | GAGE - LOCKING LUG - COMPRESSOR ROTOR ASSEMBLY | 1 | |
| 956A1151 | SET - ALIGNMENT SEGMENTS - HP COMPRESSOR STATOR RINGS | 1 | |
| 956A1153 | FIXTURE - SHIM HP COMPRESSOR STATOR AFT CASE | 1 | |
| 956A1209 | ADAPTER SET, MANIFOLD PRESSURE CHECK - FUEL | 1 | |
| 956A1209G01 | ADAPTER SET MANIFOLD PRESSURE | 1 | |
| 956A1209G02 | ADAPTER SET, MANIFOLD PRESSURE CHECK- FUEL | 1 | |
| 956A1229 | FIXTURE - DISASSEMBLY - HPT ROTOR/HP COMPRESSOR ROTOR | 1 | |
| 956A1234 | FIXTURE - SUPPORT - AFT COMPRESSOR CASE | 1 | |
| 956A1237 | GUIDE TUBE - BORESCOPE - HPT/HP COMPRESSOR JOINT | 1 | |
| 956A1256 | CART - NITROGEN - FUEL MANIFOLD PRESSURE CHECK | 1 | |
| 956A1256G01 | CART- FUEL MANIFOLD PRESSURE CHECK | 3 | |
| 956A1264 | TOOL SET - REMOVE-COMPRESSOR STATOR SHROUD PINS | 1 | |
| 956A1631G01 | ADAPTER SET - PRESSURE CHECK - FUEL MANIFOLD - LEAP 1A | 1 | |
| 956A1729 | FIXTURE - SUPPORT - AFT COMPRESSOR CASE | 1 | |
| 956A3129 | FIXTURE - SUPPORT - DISASSEMBLY - HIGH PRESSURE COMPRESSOR ROTOR | 1 | |
| 956A3155 | FIXTURE - LIFT - FWD COMPRESSOR CASE HALF | 1 | |
| 956A3173G02 | VARIABLE STATOR VANE HIGH PRESSURE COMPRESSOR (HPC) TURNBUCKLE GAUGING FIXTURE | 1 | |
| 956A3209 | ADAPTER SET - MANIFOLD PRESSURE CHECK - FUEL | 1 | |
| 956A3209G01 | ADAPTER SET, MANIFOLD PRESSURE CHECK - FUEL | 1 | |
| 956A3209G02 | ADAPTER SET - MANIFOLD PRESSURE CHECK | 1 | |
| 956A3209G03 | ADAPTER SET MANIFOLD PRESSURE CHECK | 1 | |
| 956A3234 | FIXTURE - SUPPORT - AFT COMPRESSOR CASE | 1 | |
| 956A3240 | ADAPTER SET - COMPRESSOR STATOR - DUMMY | 1 | |
| 956A3259 | ADAPTER - GUIDE - HIGH PRESSURE COMPRESSOR FORWARD SHAFT | 1 | |
| 956A3734 | FIXTURE - LIFT COMPRESSOR MODULE/SUPPORT ? AFT COMPRESSOR CASE | 1 | |
| 956A6633 | SET - ENDOSCOPIC FPI - LP COMPRESSOR BLADES | 1 | |
| 956A6850 | FIXTURE - ASSY/DIASSY - LOW PRESURE COMPRESSOR | 1 | |
| 956A6852 | DOLLY - STORAGE - LOW PRESSURE COMPRESSOR | 1 | |
| 956A6854 | FIXTURE - STOCK - BLADE LOW PRESSURE COMPRESSOR | 1 | |
| 956A6856 | STAND - STOCK/DIASSY - LOW PRESSURE COMPRESSOR FAN DISK | 1 | |
| 956A6860 | FIXTURE - LIFTING- VANE LOW PRESSURE COMPRESSOR | 1 | |
| 956A6866 | FIXTURE - LIFTING - SPOOL LOW PRESSURE COMPRESSOR | 1 | |
| 956A6866G01 | Fixture, lifting - Spool Low Pressure Compressor | 1 | |
| 956A6869 | GUIDE - VANE LOW PRESURE COMPRESSOR | 1 | |
| 956A6876 | SCREW SET - INSTALL - VANE LOW PRESSURE COMPRESSOR | 1 | |
| 956A6878 | FIXTURE - BALANCING - LOW PRESSURE COMPRESSOR | 1 | |
| 956A6880 | SCREW SET - DISINSTALL - VANE LOW PRESSURE COMPRESSOR | 1 | |
| 956A6880G01 | SCREW SET - LOW PRESSURE COMPRESSOR VANE REMOVE | 1 | |
| 956A6880G02 | SCREW SET, DISINSTALL -VANE LOW PRESSURE COMPRESSOR | 2 | |
| 956A7300 | STAND - VERTICAL STORAGE - LOW PRESSURE TURBINE | 1 | |
| 956A8079 | COVER - THERMAL - PROTECTOR - SHAFT - LP COMPRESSOR | 1 | |
| 956A8117 | SUPPORT - HEATER - SHROUD - COMPRESSOR | 1 | |
| 956A8118 | SET - DUMMY - SHROUD - COMPRESSOR NUT | 1 | |
| 956A8643 | RAKE, MEASURE PRESSURE -8PT-8TT PLANE 154, ENGINE ASSY | 1 | |
| 956A8854 | FIXTURE - STOCK - BLADE LOW PRESSURE COMPRESSOR | 1 | |
| 956A8856 | STAND - STOCK/DIASSY - LOW PRESSURE COMPRESSOR/ FAN DISK | 1 | |
| 956A8858 | FIXTURE - LIFTING- VANE LOW PRESSURE COMPRESSOR | 1 | |
| 956A8860 | FIXTURE - LIFTING - SPOOL LOW PRESSURE COMPRESSOR | 1 | |
| 956A8864 | GUIDE - VANE LOW PRESSURE COMPRESSOR | 1 | |
| 956A8864G01 | PIN - GUIDE, LOW PRESSURE COMPRESSOR VANE | 2 | |
| 956A8869 | FIXTURE - BALANCING - LOW PRESSURE COMPRESSOR | 1 | |
| 9580111570 | OIL PRESSURE TRANSMITTER | 1 | |
| 9580115420 | OIL PRESSURE TRANSMITTER | 1 | |
| 95P10AR | AXLE JACK 95P10AR 95 TON - LOW PRESSURE PUMP | 4 | |
| 9610000310 | SELF-BLANK PRESS TAP | 1 | |
| 9631000-0901 | PRESSURE CHECK TOOL | 1 | |
| 9637K17 | COMPRESSION SPRING | 1 | |
| 9637K42 | COMPRESSION SPRING | 1 | |
| 96384-100 | BENCH - PRESSURIZA-TION TEST | 2 | |
| 96400-0-2000 | Gear Press Fixture | 1 | |
| 96400-0-2000 PM | GEAR PRESS FIXTURE | 1 | |
| 965583-10 | AA-400 SUPER HEATER COMPRESSED-AIR HEATING TOOL | 1 | |
| 9657K115 | COMPRESSION SPRING 1/2 OD X 0.047 WIRE X 3" LG | 1 | |
| 9657K232 | COMPRESSION SPRING 5/16ÕÕ O.D. X 3ÕÕ LG | 1 | |
| 9657K39 | COMPRESSION SPRING | 1 | |
| 9657K73 | COMPRESSION SPRING 7/32 OD X .023 WIRE X 1" LONG | 1 | |
| 968-27237-04 | SWAGING PRESS TOOL | 1 | |
| 9682723704 | SWAGING PRESS TOOL | 1 | |
| 968RB | Pressure relief adaptation | 13 | |
| 9700-04 | PRESSURE GAUGE REPERATPRY SYS | 1 | |
| 970506-01 | ARBOR PRESS LOWER TOOL | 1 | |
| 97239-100 | HYDRAULIC SERVICE CART - PRESSURES OF 0-3000 PSI FILTERED TO 15 MICRONS ABSOLUTE | 1 | |
| 975-0172-006 | SW-PRESSURE(DLY-71)TC/737B3611055A1 | 1 | |
| 975010-005 | F4B-1-0,375-10 PRESSURE DIE | 1 | |
| 977200-1 | DRILL PRESS – DELTA BRAND | 1 | |
| 977400-1V | DRILL PRESS – DAKE MODEL P 08-427 | 1 | |
| 9796T41 | "MCAMSTER" PRESSURE GAUGE 0-30 PSI | 1 | |
| 97A2102062000 | CONNECTOR DEPRESS | 1 | |
| 97A21102033000 | GROUND PRESSURIZATION UNIT - AIR | 1 | |
| 97A21102043000 | PRESSURIZATION EQUIPMENT - APU BLEED AIR SYSTEM | 1 | |
| 97A21102505000 | BLANKING TOOL-CABIN PRESSURE TESTING | 4 | |
| 97A21102506000 | BLANKING TOOL-CABIN PRESSURE TESTING | 3 | |
| 97A28002117003 | TEST TOOL, PRESSURE | 1 | |
| 97A28002151000 | WATER-COLUMN PRESSURIZATION | 1 | |
| 97A28002191000 | PRESSURIZATION EQUIPMENT-APU FUEL FEED SYSTEM | 5 | |
| 97A2910 2035 000 | CONNECTOR PRESSURIZING HYDRAULIC TANK | 21 | |
| 97A2910 2062 000 | CONNECTOR DE-PRESSURIZING HYDRAULIC TANK | 29 | |
| 97A291020003500 | PRESSURISATION CONNECTOR | 1 | |
| 97A29102035000 | CONNECTOR-PRESSURIZING,HYDRAULIC TANK | 21 | |
| 97A29102035001 | CONNECTOR-PRESSURIZING,HYDRAULIC TANK | 1 | |
| 97A29102062 | DEPRESSURIZATION CONNECTOR | 1 | |
| 97A29102062000 | CONNECTOR - DEPRESSURIZING, HYDRAULIC RESERVOIR | 29 | |
| 97A29102062000 | CONNECTOR-DEPRESSURIZING, HYD RESERVOIR | 29 | |
| 97A29102062000-REVC | DEPRESSURIZATION CONNECTOR | 1 | |
| 97A32402018000 | PRESSURE GAGE-BRAKE BLOCK HYDRAULIC PRESSURE | 5 | |
| 97A32602403100 | SIMULATOR-TIRE PRESSURE | 1 | |
| 97F2610300000 | TEST TOOL - PRESSURE, FIRE EXTINGUISHING BOTTLE | 1 | |
| 97F26103000000 | TEST TOOL-PRESSURE,FIRE EXTINGUISHING BOTTLE | 6 | |
| 97F28001005000 | MANOMETER-PRESSURE 0 TO 0.4 BAR | 1 | |
| 97L28001013000 | FUEL TEST PRESS GAUGE | 2 | |
| 97L28001013040 | PRESSURE GAUGE | 1 | |
| 97L28001013102 | METALIC DRAIN ADAPTER,METALIC DRAIN ADAPTER, FUEL TEST PRESSURE GAUGE | 1 | |
| 97L28003013000 | FUEL TEST PRESS GAUGE | 1 | |
| 97L28003013040 | BOX 7 PRESSURE GAUGES | 1 | |
| 97L28003013041 | BOX 8 PRESSURE GAUGES | 1 | |
| 97a32302001040 | BOX 7 PRESSURE GAUGES | 1 | |
| 97a32302001041 | BOX 8 PRESSURE GAUGES | 1 | |
| 9800.4010.05 | R2S-5 WITH 15T LOW PRESSURE BAG SET | 1 | |
| 98000F29001002000 | Surge Tank Pressurization (3 tools set) | 1 | |
| 98087-1103P0329 | PRESSURE SWITCH | 1 | |
| 981018-1-3 | PRESSURE TESTER | 1 | |
| 981018-3-1 | PRESSURE TESTER | 1 | |
| 9830-010-54 | PRESSURE TRANSDUCER | 1 | |
| 98A21102043000 | PRESS. EQUIPMENT APU BLEED SYSTEM | 1 | |
| 98A21102506000 | BLANKING TOOL-CABIN PRESSURE TEST | 1 | |
| 98A21203500000 | TOOL,PRESSURIZING-APU BLEED AIR SYSTEM | 3 | |
| 98A24403000000 | CONNECTOR DEPRESS | 30 | |
| 98A26203001000 | PRESSURE TEST ADAPTOR | 2 | |
| 98A26203011000 | ADAPTOR PRESSURE GAUGE | 1 | |
| 98A27309005000 | WRENCH ADAPTER FOR OVERPRESSURE DEVICE | 1 | |
| 98A27309006000 | JIG FOR OVERPRESSURE DEVICE | 1 | |
| 98A27309007000 | ASSEMBLY TOOL FOR OVERPRESSURE DEVICE | 1 | |
| 98A27504022100 | SEAL COMPRESSING TOOL | 1 | |
| 98A27604013000 | COMPRESSION TOOL | 1 | |
| 98A28104003001 | TANK PRESSURIZATION SYSTEM | 2 | |
| 98A29003000100 | GROUND SERVICE PANEL LINE PRESSURE COUPLING | 1 | |
| 98A29102035000 | CONNECTOR-PRESSURIZING,HYDRAULIC TANK | 1 | |
| 98A29102062000 | CONNECTOR - DEPRESSURIZING, HYDRAULIC RESERVOIR | 1 | |
| 98A32203003000 | ROD-COMPRESSOR SPRING | 1 | |
| 98A38308235000 | ADAPTER - ALTITUDE PRESSURE SWI | 2 | |
| 98A38308456000 | ADAPTER-ALTITUDE PRESSURE SWITCH | 1 | |
| 98A520-03500 | SPRING COMPRESSION TOOL | 1 | |
| 98A52007521013 | COMPRESSION SPRING | 1 | |
| 98A54303000000 | SETTING TOOL-FWD PRESSURE RELIEF DOOR | 1 | |
| 98A54503000000 | SETTING TOOL-AFT PRESSURE RELIEF DOOR | 1 | |
| 98A54503001000 | SETTING TOOL-AFT PRESSURE RELIEF DOOR | 1 | |
| 98A55307516015 | COMPRESSION SPRING | 1 | |
| 98A55307626106 | PRESS TUBE | 1 | |
| 98A57804003000 | SPRING COMPRESSOR ASSY | 1 | |
| 98A76103500000 | RINGS AND COMPRESSED SPRINGS HOLDING TOOL | 1 | |
| 98C7830H029-000 | REVERSE PUSH SUPPRESSION TOOL | 1 | |
| 98D10103500042 | Static pressure hole plugging | 12 | |
| 98D10103500043 | Static pressure hole plugging | 13 | |
| 98D229003501000 | FILL UNIT-AIR PRESSURIZING TOOL, HYDRAULIC RESERVOIR | 1 | |
| 98D26203000004 | PRESS. TEST FIRE EXTINGUISHER | 4 | |
| 98D26203001001 | PRESSURE GAUGE TEST KIT FIRE EXTING. | 17 | |
| 98D26203001002 | FIRE EXTINGUISHER PRESSURE TESTER | 7 | |
| 98D26203002004 | PRESS. TEST FIRE EXT | 24 | |
| 98D26203002006 | PRESSURE GAUGE TEST KIT FIRE EXT. | 13 | |
| 98D27403003052 | HYDRAULIC ASSEMBLY PUMP WITH PRESSURE HOSES | 1 | |
| 98D27504030001 | CONNECTOR - DEPRESSURIZING, HYDRAULIC RESERVOIR | 26 | |
| 98D28004086000 | TEST RIG AIR PRESSURE | 1 | |
| 98D28108417000 | TEST TOOL-PRESSURE,ACT | 1 | |
| 98D28108562000 | ADAPTER, PRESSURE DRAIN-ACT | 11 | |
| 98D2810864044 | PRESSURE REGULATOR (PART OF 98D28108647000) | 1 | |
| 98D28108647044 | PRESSURE REGULATOR VALVE | 3 | |
| 98D28108658000 | TOOL-PRESSURE TEST,ACT | 11 | |
| 98D28108658040 | ACT PRESSURE TEST TOOL 1 & 2 | 1 | |
| 98D28108658042 | ACT PRESSURE TEST TOOL 3 | 1 | |
| 98D29003501000 | FILL UNIT-AIR PRESSURIZING TOOL, HYDRAULIC RESERVOIR | 22 | |
| 98D290035010003 | FILL UNIT-AIR PRESSURIZING TOOL, HYDRAULIC RESERVOIR | 1 | |
| 98D29003501003 | FILL UNIT-AIR PRESSURIZING TOOL, HYDRAULIC RESERVOIR | 17 | |
| 98D29108224000 | TEST SET - PRESSURIZING | 1 | |
| 98D32104028000 | Compression Tool | 2 | |
| 98D34003500000 | Static pressure port connector | 31 | |
| 98D35208729000 | TOOL-DPRESS, TEST O2 | 8 | |
| 98D35208729001 | TOOL DEPRESS. TEST PORT O2 | 9 | |
| 98D35208729001 | Tool -D,press TES-02 iss1 | 9 | |
| 98D36103000000 | PRESSURE LOSS TEST | 7 | |
| 98D38308234000 | ADAPTER ALTITUDE PRESSURE SWITCH | 1 | |
| 98D38308234001 | ADAPTER - ALTITUDE PRESSURE SWITCH | 13 | |
| 98D47009001000 | PRESSURE TESTER, FTIS RETROFIT | 3 | |
| 98D47009001001 | PRESSURE TESTER, FTIS RETROFIT | 1 | |
| 98D47009001002 | PRESSURE TESTER, FTIS RETROFIT LR SA | 4 | |
| 98D47009001003 | PRESSURE TESTER, FTIS SA/LR & ATA28 SA | 5 | |
| 98D47209001-108 | PRESSURE VACUUM TESTER, IGGS | 1 | |
| 98D47209001-110 | PRESSURE VACUUM TESTER, IGGS | 1 | |
| 98D47209001-112 | PRESSURE VACUUM TESTER, IGGS | 1 | |
| 98D47209001-114. | PRESSURE VACUUM TESTER, IGGS | 1 | |
| 98D47209001-116 | PRESSURE VACUUM TESTER, IGGS | 1 | |
| 98D47209001-118 | PRESSURE VACUUM TESTER, IGGS | 1 | |
| 98D47209001-120 | PRESSURE VACUUM TESTER, IGGS | 3 | |
| 98D47209001-122 | PRESSURE VACUUM TESTER, IGGS | 1 | |
| 98D47209001-124 | PRESSURE VACUUM TESTER, IGGS | 1 | |
| 98D47209001000 | PRESSURE VACUUM TESTER, IGGS | 13 | |
| 98D56003001000 | AILERON/FUSELAGE HINGE PRESSURE APPLY TOOL | 4 | |
| 98D56103003000 | RUDDER/FUSELAGE HINGE PRESSURE APPLY TOOL | 18 | |
| 98D57004000216 | PRESSURE PLATE | 1 | |
| 98D57103000000 | DRILL,GUIDE-FOR PRESSURIZED FLOOR FITTINGS | 1 | |
| 98DPG-1001 | DIGITAL PRESSURE GAUGE | 1 | |
| 98E2104021001 | TOOL COMPRESSION | 1 | |
| 98F20008247222 | HIGH PRESSURE HOSE | 1 | |
| 98F26203000004 | FIRE SYSTEM PRESS TEST KIT TOOL | 6 | |
| 98F26203000010 . | FIRE SYSTEM PRESS TEST KIT TOOL | 11 | |
| 98F28109018000 | Pressure Transducer Tool | 3 | |
| 98F29003502000 | FITTING BRAKE PRESSU | 7 | |
| 98F29103500000 | THIS TOOL IS USED TO PRESSURIZE ACCUMULATORS. | 20 | |
| 98F29103500100 | PRESSURE REDUCING VALVE GASE ASSY | 1 | |
| 98F30403001000 | RAIN REPELLENT PRESS | 11 | |
| 98F32001006000 | HIGH PRESS FILLING TOOL | 13 | |
| 98F32001006040 | PRESSURE REGULATOR | 1 | |
| 98F32104021000 | TOOL - COMPRESSION | 5 | |
| 98F32104021001 | TOOL - COMPRESSION | 8 | |
| 98F32104044000 | TOOL - COMPRESSION | 1 | |
| 98F321O4044000 | TOOL- COMPRESSION | 1 | |
| 98F34103003000 | PRESSURE GENERATOR | 28 | |
| 98F35208689108 | PRESSURE PAD COMP. | 1 | |
| 98F36003002000 | ENGINE BLEED SYSTEM TEST SET / PRESS | 3 | |
| 98K7830H017-000 | SLAT CLEARANCE PANEL SPRING COMPRESSOR | 1 | |
| 98L28004034000 | KIT AIR PRESSURE | 1 | |
| 98L28004035000 | TEST RIG-AIR PRESSURE | 1 | |
| 98L28004061000 | NACA DUCT PRESSURE TEST | 2 | |
| 98L29101002000 | OUT.MOBILE PRESSU.BACHES FILL UNIT AIR | 2 | |
| 98L36103002000 | BLEED SYSTEM TEST SET PRESS | 29 | |
| 98L36103002054 | PLUG, HYDRAULIC PRESSURE - ENGINE BLEED TEST SET | 5 | |
| 98L52403000000 | COMPRESS TOOL-DOOR JACK | 1 | |
| 98L52403000100 | DOORS JACK COMPRESS TL | 1 | |
| 98N7830H013-00002 | PRESSURE GAUGE KIT | 1 | |
| 98S 291 0 3000 000 | PRESS XMTR/OVHT SENSOR | 6 | |
| 98S29003000000 | SETTING UNIT-HYD PRESSURE | 2 | |
| 98S29103000000 | Press XMTR/OVHT Sensor | 6 | |
| 98S29103000201 | PRESS. TRANSM. BOX WRENCH | 2 | |
| 98S32005006 | NLG SHOCK ABSORBER COMPRESS TOOL | 1 | |
| 98S32005006000 | NLG SHOCK ABSORBER COMPRESSION TOOL | 1 | |
| 98S32005006000 | TOOL TO COMPRESS NLG SHOCK ABSORBER | 1 | |
| 98S32005006001 | TOOL TO COMPRESS NLG SHOCK ABSORBER | 1 | |
| 98S32405000000 | Low Press Brk Sys Purging | 10 | |
| 98S32405000000-REVB | BRAKE PRESS BRK SYS PURGING TOOL | 1 | |
| 98S32405002000 | Brake Pressure Gauge | 4 | |
| 98S32405002000-REVB | MLG BRAKE PRESS GAUGE | 1 | |
| 98S32405004 | LOW PRESS' BRK' PURGING | 1 | |
| 98S32405004-000 | LOW PRESSURE BRAKE SYSTEM PURGING TOOL | 1 | |
| 98S32405004000 | LOW PRESSURE BRAKE SYSTEM PURGING TOOL | 1 | |
| 98S53205000000 | TOOL-PRESSURE | 11 | |
| 98S532405002000 | BRAKE PRESSURE GAUGE (COMPLETE TOOL) | 1 | |
| 98S53505006000 | Pressure Plate Calibration | 4 | |
| 98S53505006200 | PRESS. PLATE FR. 25 / FR. 27-INTERNAL | 1 | |
| 98S53505006202 | PRESS. PLATE FR. 25 / FR. 27-INTERNAL CALIBRATION | 1 | |
| 98S53805002-000 | ATR REFERENCE STANDARD 53-61-18 PT 6 FIGURE 603 PAGE 609. INSPECTION OF REAR PRESSURE BULKHEAD PERIPHERY OF DOME SKIN AND CONNECTION WITH VERTICAL FLANGE OF DOME VERTICLAL CHORD. Includes Test Report traceable to NIST and Certificate of Conformance. | 6 | |
| 98S53805002000 | Fus Rr Press Bulkhead Cal | 6 | |
| 98V10001006000 | Static pressure hole ISP-1000 protection board | 7 | |
| 98V21508001000 | DEVICE-PRESS/DRAIN,H2 | 1 | |
| 98V21508782000 | DEVICE-PRESS/DRAIN,H2 | 1 | |
| 98V27104052000 | ACTUATOR COMPRESSION | 1 | |
| 98V27908001000 | BPS backup power supply suppression tool | 3 | |
| 98V28004004000 | RECOVERY TOOL - FUEL PRESSURE GAUGE | 1 | |
| 98V28004012000 | HOSE-PRESSURE TEST | 1 | |
| 98V38108003000 | High pressure support cover for sewage tank | 6 | |
| 98V52203000000 | COMPRESSOR JACK CKPT HATCH | 3 | |
| 98V56103000000 | POSIT. PRESS WINDOW | 3 | |
| 99-916 | DIPSTICK,OIL FREON COMPRESSOR | 1 | |
| 990.00.00.660 | CABIN PRESSURISATION UNIT | 1 | |
| 990.00.00.661 | UNIT, PRESSURIZATION, CABIN | 1 | |
| 990.00.00.830 | TEST SET, PRESSURE CALIBRATOR | 1 | |
| 990.00.00.839 | PRESSURE CALIBRATOR | 1 | |
| 990.00.00.858 | PRESSURE CALIBRATOR | 1 | |
| 990.00.00.864 | PRESSURE CALIBRATOR TEST SET | 1 | |
| 991-4-14607-003 | ADAPTOR-PLUG,PRESSURE GAUGE | 1 | |
| 99226-100 | TESTER PRESSURIZED CABIN | 1 | |
| 9970-957-523 | TOOL SET, CHECKING PRESSURE DECA | 1 | |
| 997A29102062000 | CONNECTOR-DEPRESSURIZING, HYDRAULIC RESERVOIR | 1 | |
| 998-3414-515 | DOWNLOAD AND AUDIO DECOMPRESSION SOFTWARE PLAYBACK 3 | 1 | |
| 999-447 | PRESSURE REGULATOR HP | 1 | |
| 999-448 | PRESSURE REGULATOR HP | 1 | |
| 99A29101004000 | MANIFOLD-HYDRAULIC HIGH PRESSURE | 1 | |
| 99A29101005000 | MANIFOLD-HYDRAULIC LOW PRESSURE | 1 | |
| 99A29102035000 | CONNECTOR-PRESSURIZING,HYDRAULIC TANK | 1 | |
| 99A55407291000 | QAD - TOTAL PRESSURE SYSTEM(OR QAD CONNECTOR) | 5 | |
| 99A79003000000 | ENGINE OIL PRESSURE SIMULATOR | 1 | |
| 9C1018 | MANIFOLD PRESSURE CHECK FUEL ADAPTER | 1 | |
| 9C1018G03 | MANIFOLD PRESSURE CHECK FUEL ADAPTER | 1 | |
| 9C1018G04 | MANIFOLD PRESSURE CHECK FUEL ADAPTER | 1 | |
| 9C1197 | FIXTURE SET - GUIDE - COMPRESSO | 1 | |
| 9C1201G01 | Tool - Balance Weight Clip, GE90 Low Pressure Turbine | 2 | |
| 9C1203 | PROTECTOR - DISK, HIGH PRESSUR | 1 | |
| 9C1276 | PRORECTOR-COMPRESSOR | 1 | |
| 9C1366G01 | SHIM SET - STAGE 6 LOW PRESSURE TURBINE ROTOR (LPTR) | 1 | |
| 9C1375 | PUSHER-COMPRESSOR SHAFT | 1 | |
| 9C1392 | GUIDE COMPRESSOR | 1 | |
| 9C1442 | FXTR, RESTRAINING-LOW PRESSURE TURBINE CASE | 1 | |
| 9C1883 | TOOL SET/BENCH HYDRAULIC PRESS | 1 | |
| 9C1930 | AIR PRESSURE TEST | 1 | |
| 9C1944 | AIR PRESSURE TEST TGBX ASSY | 1 | |
| 9C2054 | PRESSURE TEST FIXTURE | 1 | |
| 9C2303 | HANDLING HP COMPRESSOR | 1 | |
| 9C3124G01 | CLASS 6 LOW PRESSURE TURBINE ROTOR BLADE INSPECTION EQUIPMENT | 1 | |
| 9C3124G03 | TORQUEMETERCLASS 6 LOW PRESSURE TURBINE ROTOR BLADE INSPECTION EQUIPMENT | 2 | |
| 9C3131G02 | NTERNAL LOCK WEAR CALCULATION SOFTWARE FOR STAGE 6 LOW PRESSURE TURBINE ROTOR BLADES | 1 | |
| 9C3165 | FIXTURE, TORQUE REACTION - LOW PRESSURE TURBINE SHAFT TO ELECTRONIC NUTRUNNER | 1 | |
| 9C3402 | BAR, LIFT AND TURN - HP COMPRESSOR | 1 | |
| 9L3Z1A189A | GAGE PRESSUR | 1 | |
| A 1/4 60 | PRESSURE GAUGE | 1 | |
| A-259 | SPRING, COMPRESSION, SPEEDER | 5 | |
| A-302 | STATIC PRESSURE TIP TOOL | 2 | |
| A-A-1726 | GAUGE TIRE PRESSURE | 1 | |
| A-A142463-1/03 | PRESSURE TEST FIXTURE (3 IT) | 1 | |
| A00415 | NITROGEN FILLER TOOL PRESSUREREGULATOR TILL 100B | 1 | |
| A01-670-1500-1 | Brake Pressure Unit - Adjusting And Servicing | 1 | |
| A0100278 | PRESSING-OUT MANDREL | 1 | |
| A0100278PM | PRESSING-OUT MANDREL | 1 | |
| A0108997 | BEARING PRESS | 2 | |
| A0110368 | PRESSING IN SLEEVE (SMALL BEAR.) (2 IT) | 1 | |
| A0111245 | PRESSING-IN SLEEVE FOR THEBEARING | 2 | |
| A0117482 | Pressing-in Sleeve for the Small Bearing | 1 | |
| A0117482PM | PRESSING-IN SLEEVE FOR THE SMALL BEARING | 1 | |
| A0118080 | Pressing in Sleeve for the Large Bearing | 1 | |
| A0118080PM | PRESSING IN SLEEVE FOR THE LARGE BEARING | 1 | |
| A0123054 | PRESSING IN SLEEVE (LARGE BEAR.) (2 IT) | 1 | |
| A0123100 | PRESSING-IN SLEEVE FOR SMALLER BEARING | 1 | |
| A0123431-1 | ADAPTER BRAKE PRESSURE C/W GAUGE | 1 | |
| A0124414 | PRESSING-IN SLEEVE FOR LARGER BEARING | 1 | |
| A0125042 | Sleeve for pressing in bearing cups | 1 | |
| A0269127 | PRESSING IN TOOL | 1 | |
| A0269128 | PRESSING IN TOOL | 1 | |
| A04007 | AIR CONNECTOR WITH PRESSURE RELIEF VALVE (IT IS PART OF THE TOOL J-AXLE45AHPA.)_ | 1 | |
| A045784 | PRESSING-IN COLLAR | 1 | |
| A045979 | MANDREL, PRESSING OUT | 2 | |
| A045979PM | MANDREL, PRESSING OUT | 1 | |
| A047633 | MANDREL, PRESSING OU | 2 | |
| A11069 | COMPRESSION TOOL | 1 | |
| A11918-1 | HOSE ASSY HYDRAULIC SYSTEM PRESSURE PTFE TOOL | 1 | |
| A12007-20 | GAGE - TIRE PRESSURE INFLATOR - TIRE GAUGE - TIRE PRESSURE, 0-300 PSIG (0-2069 KPA), /- 3 PSIG ACCURACY | 7 | |
| A12007-23 | GAUGE - TIRE PRESSURE, 0-300 PSIG | 10 | |
| A12790 | HIGH PRESSURE HOSE ASSY | 1 | |
| A12834 | GAGE, PRESSURE INLET 5000 PSI | 1 | |
| A1310SP | A1310 SHOP PRESS ADAPTOR KIT | 1 | |
| A16357 | BRAKE PISTON COMPRESSOR TOOL | 5 | |
| A20294-501 | RING - PRESSURE | 1 | |
| A21003-1 | CABIN AIR PRESSURE RELIEF | 1 | |
| A21006-1 | BLANKING PLATE- DUCT PRESS & LEAK CHK | 1 | |
| A21010 | VACUUM TANK - PRESSURE RELIEF VALVE TEST | 2 | |
| A21010 REV E | VACUUM TANK - PRESSURE RELIEF VALVE TEST | 1 | |
| A21010-103 | VACUUM TANK - PRESSURE RELIEF VALVE TESTER | 1 | |
| A21010-145 | Differential Pressure Gauge | 1 | |
| A21010-187 | Vacuum Tank - Pressure Relief Valve Test | 3 | |
| A21010-188 | Vacuum Tank - Pressure Relief Valve Test | 4 | |
| A21010-189 | Vacuum Tank - Pressure Relief Valve Test | 4 | |
| A21010-190 | Vacuum Tank - Pressure Relief Valve Test | 9 | |
| A21010-195 | Pressure Relief Valve Test | 1 | |
| A21010-200 | Pressure Relief Valve Tank | 1 | |
| A21010-203 | VACUUM TANK - PRESSURE RELIEF VALVE TEST | 12 | |
| A21010-30 | VACUUM TANK-PRESSURE RELIEF | 1 | |
| A21010-38 | Vacuum Tank-Pressure Relief Valve Test | 1 | |
| A21010-57 | TEST EQUIPMENT - PRESSURE RELIEF VALVE VACUUM TANK | 3 | |
| A21010-62 | PRESSURE RELIEF | 1 | |
| A21010-63 | TEST EQUIPMENT - PRESSURE RELIEF VALVE VACUUM TANK | 2 | |
| A21010-64 | PRESS RELIEF VALVE T | 1 | |
| A21010-69 | TEST EQUIPMENT - PRESSURE RELIEF VALVE VACUUM TANK | 4 | |
| A21010-70 | POSITIVE PRESSURE TEST RIG TOOL | 7 | |
| A21010-70-M | PRESSURE RELIEF VACUUM TANK | 1 | |
| A21010-72 | VACUUM TANK-PRESSURE RELIEF VALVE TEST | 2 | |
| A21010-81 | Pressure Cap | 1 | |
| A21010-90 | Pressure Gauge | 1 | |
| A21011-6/GH10XTHEXXXA | Pressure regulator | 1 | |
| A21011-6/GH10XTHEXXXB | Pressure regulator | 1 | |
| A21020-190 | VACCUM TANK PRESSURE RELIEF VALVE TEST | 1 | |
| A2500203A | PRESSING TOOL | 1 | |
| A25005-1 | SIMULATOR-GAS PRESSURE VESSEL | 1 | |
| A25005-21 | SIM,GAS PRESS VESSEL | 1 | |
| A25005-29 | SIMULATOR - GAS PRESSURE VESSEL | 3 | |
| A2551016620000 | PRESSURE TEST TOOL | 1 | |
| A26011 | PRESS LEAKAGE TEST | 1 | |
| A27010-190 | TEST EQUIPMENT - PRESSURE RELIEF VALVE VACUUM TANK | 1 | |
| A27073-1 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 5 | |
| A28004-1 | CHECK FIXTURE - SURGE TANK PRESSURE RELIEF VALVE | 4 | |
| A28005 | TEST EQPT-LEAK & PRESSURE,APU FUEL LINE SHROUD | 2 | |
| A28005-24 | TEST EQUIPMENT - LEAK AND PRESSURE, APU FUEL LINE SHROUD | 10 | |
| A28005-33 | APU SHROUD PRESSURE TEST HOSE - B757 | 1 | |
| A28005-35 | TEST EQUIPMENT - LEAK AND PRESSURE, APU FUEL LINE SHROUD | 4 | |
| A28005-42 | Test Equipment - Leak and Pressure, APU Fuel Line Shroud | 7 | |
| A28005-43 | TEST EQUIPMENT - LEAK AND PRESSURE, AUXILIARY POWER UNIT (APU) FUEL LINE SHROUD | 3 | |
| A28005-44 | TEST EQUIPMENT LEAK CHECK PRESSURE APU FUEL LINE SHROUD | 1 | |
| A28005-48 | Test Equipment - Leak and Pressure, APU Fuel Line Shroud | 21 | |
| A28005-49 | TEST EQUIPMENT LEAK CHECK PRESSURE APU FUEL LINE SHROUD | 1 | |
| A28005-50 | Test Equipment - Leak and Pressure, APU Fuel Line Shroud | 18 | |
| A28005-51 | PRESSURE GAUGE 36 PSI / 2,5 BAR 100mm | 1 | |
| A28005-53 | TEST EQUIPMENT - LEAK AND PRESSURE, AUXILIARY POWER UNIT (APU) FUEL LINE SHROUD | 6 | |
| A28005-56 | TEST EQUIPMENT - LEAK AND PRESSURE APU SHROUD | 1 | |
| A28005-80 | Test eqpt-leak & pressure，apu fuel line shroud | 2 | |
| A28005-81 | Test Equip - Leak & Pressure, APU Fuel Line | 6 | |
| A28005-82 | TEST EQUIPMENT - LEAK AND PRESSURE, AUXILIARY POWER UNIT (APU) FUEL LINE SHROUD | 9 | |
| A28005-83 | TEST EQUIPMENT - LEAK AND PRESSURE, AUXILIARY POWER UNIT (APU) FUEL LINE SHROUD | 7 | |
| A28005-TBD | Test Eqpt - Leak & Pressure, APU Fuel Line Shroud | 1 | |
| A2800543 | TEST EQUIP-LEAK & PRESS, APU FUEL | 3 | |
| A2800550 | TEST EQPT - LEAK PRESS APU FUEL | 18 | |
| A28011-48 | TEST EQUIPMENT - PRESSURE/LEAKAGE, FUEL LINES AND FITTINGS | 1 | |
| A28011-49 | TEST EQUIPMENT - PRESSURE/LEAKAGE, FUEL LINES AND FITTINGS | 1 | |
| A28011-50 | TEST EQUIPMENT - PRESSURE/LEAKAGE, FUEL LINES AND FITTINGS | 1 | |
| A28018-1 | TEST EQUIPMENT - PRESSURE OUTPUT, FUEL BOOST PUMP | 1 | |
| A29002 | LOCKING PIN VALVE HYD RES. PRESSURIZATION | 2 | |
| A29002-1 | LOCK PIN-HYD RESERVOIR PRESS'N VALVE | 1 | |
| A29002-6 | LOCKING PIN - VALVE, HYDRAULIC RESERVOIR PRESSURIZATION SHUTOFF | 16 | |
| A29002-6 | LOCKING PIN – HYDRAULIC RESERVOIR PRESSURIZATION SHUTOFF VALVE | 16 | |
| A29005-1 | CAP - SEALING, PRESSURE TRANSMITTER MOUNT | 1 | |
| A29006-1 | SWITCH PRESSURE/TERMAL | 1 | |
| A29006-19 | TEST EQUIPMENT - SWITCH, PRESSURE/THERMAL | 1 | |
| A300-CAR-NOZ-PX-TEST | A300 CARGO NOZZLE PRESSURE TEST KIT( | 1 | |
| A30002 | PLUG EQUIPMENT THERMAL ANTI ICING DUCT PRESSURE SWITCH TEST | 1 | |
| A30002-1 | PLUG EQUIPMENT - THERMAL ANTI-ICING DUCT, WING PRESSURE SWITCH TEST | 5 | |
| A302 | STATIC PRESSURE PROB | 2 | |
| A310-21-27-00-0361 | PRESSURE MEASURING DEVICE | 1 | |
| A320-1 | PRESSURE BLANK KIT TOOL | 1 | |
| A320-28-1105 | ACT PRESS BLANK KIT TOOL | 1 | |
| A320/1 VAPOUR T/SET | VAPOUR SEAL PRESSURE CHECK TOOL | 1 | |
| A320/A321 TIRE PRESSURE GAUGE | A320/A321 TIRE PRESSURE GAUGE | 1 | |
| A32003 | SPRING COMPRESSOR – SIDE STRUT, MLG | 1 | |
| A32003-1 | SPRING COMPRESSOR - SIDE STRUT, MAIN LANDING GEAR (MLG) | 12 | |
| A32003-2 | COMPRESS TOOL | 1 | |
| A32003-7 | COMPRESS TOOL | 1 | |
| A32028-3 | OLEO COMPRESSION STRAP | 1 | |
| A32066-1 | VALVE -DRAIN SHOCK STRUT FLUID PRESSURE GAUGE 0-3000PSI | 14 | |
| A32071-1 | COMPRESSION TOOL - SPRING CARTRIDGE NOSE WHEEL STEERING | 2 | |
| A32071-28 | COMPRESSION TOOL - SPRING CARTRIDGE NOSE WHEEL STEERING | 1 | |
| A32071-29 | COMPRESSION TOOL - SPRING CARTRIDGE NOSE WHEEL STEERING | 1 | |
| A321 TIRE PRESSURE GAUGE | A321 TIRE PRESSURE GAUGE | 1 | |
| A330 | TIRE PRESSURE GAUGE | 1 | |
| A33026001 | PRESSURE GAUGE (CARGO FIREX TEST) | 1 | |
| A35002-10 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 7 | |
| A35002-7 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 4 | |
| A36002-1 | PNEU DUCT PRESSURIZ. PLUG EQPT | 1 | |
| A36003-14 | PLUG ASSY-PRESS TEST | 1 | |
| A36003-173 | PLUG SET - PNEUMATIC DUCTS HYDROSTATIC PRESSURE TEST | 1 | |
| A36003-177 | PLUG SET - PNEUMATIC DUCTS HYDROSTATIC PRESSURE TEST | 1 | |
| A36003-178 | PLUG SET - PNEUMATIC DUCTS, HYDROSTATIC PRESSURE TEST | 1 | |
| A36003-179 | PLUG SET - PNEUMATIC DUCTS, HYDROSTATIC PRESSURE TEST | 1 | |
| A36005-1 | HOLD OPEN EQUIPMENT - PRESSURE REGULATING AND SHUT-OFF VALVE (PRSOV) | 3 | |
| A36005-15 | HOLD OPEN EQUIPMENT - PRESSURE REGULATING AND SHUT-OFF VALVE (PRSOV) | 10 | |
| A36006-1 | DUMMY CHECK VALVE - INTERMEDIATE PRESSURE (IP) PNEUMATIC SYSTEM, DISPATCH EQUIPMENT | 2 | |
| A36007-1 | TEST EQUIPMENT - INTERMEDIATE PRESSURE (IP) DUMMY CHECK VALVE | 1 | |
| A36008-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| A36009-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| A36010-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| A36011-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| A36012-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| A36013-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| A36014-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| A36015-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| A36016-1 | PRESSURE TEST PLUG - DUCT ASSEMBLY | 1 | |
| A36017-1 | PLUG - DUCT, PROOF PRESSURE TEST | 1 | |
| A36018-1 | PLUG EQUIPMENT - DUCT, PROOF PRESSURE TEST | 1 | |
| A36019-1 | PLUG EQUIPMENT - DUCT, PROOF PRESSURE TEST | 1 | |
| A36020-1 | PLUG EQUIPMENT - DUCTS, PROOF PRESSURE TEST | 1 | |
| A38001-49 | PRESS BLOCK | 1 | |
| A38003-30 | CLEANING ELEMENT, PIPELINE, FLUID PRESSURE | 13 | |
| A38006-1 | TOILET VACUUM TEST KIT - PRESSURE GAUGE | 20 | |
| A38012-40 | PRESSURE WASHER CLEANING TEST SET | 11 | |
| A38012-67 | Pressure gauge | 2 | |
| A3XX-26-00-00-0212 | TOOL- PRESSURE TEST | 1 | |
| A48432 | COMPRESSION TOOL | 1 | |
| A49007-8 | COMPRESSOR CLEANER APU | 1 | |
| A51004-1 | LADDER SET - EMPENNAGE, PRESSURE BULKHEAD | 4 | |
| A51005-14 | OIL CAN GAGE - PRESSURE BULKHEAD | 1 | |
| A51007-1 | MAINTENANCE PLATFORM EQUIPMENT - PRESSURE BULKHEAD ACCESS | 1 | |
| A521-11527-000W6700-01 | ADAPTER PLATE FOR PRESSURE TEST | 1 | |
| A607 | REF STD, AFT PRESS BLKD @ BS 1582, 2 -2 | 4 | |
| A607A | REF STD, AFT PRESS BLKD @ BS 1582, 1 -2 | 3 | |
| A668060 | COMPRESS THE SPRING | 1 | |
| A685200 | SPRING COMPRESSOR | 1 | |
| A685200 PM | SPRINGCOMPRESSOR | 1 | |
| A689565 | COMPRESSION FIXTURE | 1 | |
| A689565 PM | COMPRESSION FIXTURE | 1 | |
| A71036-1 | MONITORING ASSEMBLY - BREATHER PRESSURE, JT9D-7R4 ENGINE | 1 | |
| A768-210-30 | Gage, High Pressure | 1 | |
| A768-210-30 ALT. 300066 | GAGE L/G STRUT SERVICING HIGH PRESS | 1 | |
| A768-210-6 | DIAL PRESSURE GAUGE | 1 | |
| A768-2106 | GAGE, LANDING GEAR STRUT SERVICING LOW PRESSURE | 1 | |
| A78-5 | SCREW PRESSURE 1/2-13X4-1/2 | 1 | |
| A78021-3 | Spring compressor | 1 | |
| A813614 | PRESSURE TEST PLUG | 2 | |
| AA-30 | HASKEL AIR PRESSURE AMPLIFIERS | 1 | |
| AA-400 | AA-400 SUPER HEATER COMPRESSED-AIR HEATING TOOL | 2 | |
| AA15-221_*100PSI | PRESSURE GAUGE 100PSI CL-1.5 | 1 | |
| AA292579 | SPRING COMPRESSOR TOOL NO. AA292579 FOUR (4) REPLACEMENT HOSES FOR CYLINDER HEAD HYDRAULIC MOUNTING FIXTURE AA293268 | 1 | |
| AA375R | PRESSURE GAUGE | 1 | |
| AA405F-17 | ADTS405MK2 PRESSURE CONN AN4 ROUND | 1 | |
| AA405F-18 | ADTS405MK2 PRESSURE CONN AN6 ROUND | 1 | |
| AA500E-10 | PRESSURE CONNECTOR | 1 | |
| AA500F-1 | PRESSURER CONNECTOR AN3 | 4 | |
| AA500F-2 | PRESSURE CONNECTOR AN4 | 3 | |
| AA500F-21 | HOSE PRESSURE CONEECTOR AN3 FEMALE | 4 | |
| AA500F-22 | CHARGE REPAIR PRESSURE FITTINGS | 6 | |
| AA500F-23 | HOSE PRESSURE CONNECTOR AN6 FEMALE | 5 | |
| AA500F-24 | 2 X STAUBLI PRESSURE CONNECTOR KIT | 3 | |
| AA500F-25 | HOSE PRESSURE CONNECTOR AN6 | 3 | |
| AA500F-27 | HOSE PRESSURE CONNECTOR AN6 | 3 | |
| AA500F-3 | PRESSURE CONNECTOR AN6 | 3 | |
| AA500F-4 | X STAUBLI PRESSURE CONNECTOR KITS | 3 | |
| AA500F-41 | 10M LENGHT APPROXIMATELY PRESSURE | 3 | |
| AA500F-5 | PRESSURE CONNECTOR AN6 | 3 | |
| AA500F-9 | PRESSURE CONNECTOR AN6 | 3 | |
| AA500F22 | CHARGE REPAIR PRESSURE FITTINGS | 6 | |
| AA617-6329-001 | GIMBAL CAP PRESS SUPPORT TOOL | 1 | |
| AAB0006 | TORQUE SOCKET, M/R & T/R SERVO ACTUATOR PRESS SWITCH | 1 | |
| AAB0026 | TORQUE SOCKET, M/R AND T/R SERVOACTUATOR PRESS (GF-95-00) | 1 | |
| AAD-30 | HASKEL AIR PRESSURE AMPLIFIERS | 1 | |
| AAR-MF-0241 | HIGH PRESSURE REGULATOR BOX | 1 | |
| AAR-MF-0242 | LOW PRESSURE REGULATOR BOX | 1 | |
| AAZ-T01 | PRESSURE REGULATOR W/ SERVICING KIT | 1 | |
| AB1043 | Connector, Ground cooling low pressure air | 1 | |
| AB114-151-1 | COMPRESSION RIVETING PEEN | 1 | |
| AB114-151-2 | COMPRESSION RIVETING ANVIL | 1 | |
| AB27001-Y2F | HYDRAULIC ASSEMBLY PUMP WITH PRESSURE HOSESFIXTURE STRUT THSA | 1 | |
| AB28001-G7U | PRESSURE REGULATOR VALVE | 1 | |
| AB38001-T5J | ADAPTER - ALTITUDE PRESSURE SWITCH | 1 | |
| AB52001-SV2 | DECOMPRESSION TEST SIMULATOR | 1 | |
| ABA-B7000-500 | COMPRESSOR | 1 | |
| AC 20-1005P-02L-600# | commercial pressure gauge, 2.5in dial, black ABS case, bronze tube, 1/4in NPT lower connection, 0-600PSI range | 1 | |
| AC 25-1001TH-01B-XUC-160# | panel pressure gauge, 2.5in dial, steel case, bronze tube, 1/8in NPT back connection, U clamp, 0-160PSI range | 1 | |
| AC 25-1009AW-02L-XC4LL-1000# | pressure gauge, 2.5in dial, SS case, bronze tube, 1/4in lower connection, calibration cert, Plus! option, 0-1000PSI range | 1 | |
| AC 25-1009AW-02L-XC4LL-30# | pressure gauge, 2.5in dial, SS case, bronze tube, 1/4in NPT lower connection, calibration cert, Plus! option, 0-30PSI range | 1 | |
| AC 25-1009AW-02L-XC4LL-300# | pressure gauge, 2.5in dial, SS case, bronze tube, 1/4in NPT lower connection, calibration cert, Plus! option, 0-300PSI range | 1 | |
| AC 25-1009AW-02L-XC4LL-60# | pressure gauge, 2.5in dial, SS case, bronze tube, 1/4in NPT lower connection, calibration cert, Plus! option, 0-60PSI range | 1 | |
| AC 25-1009SW-02L-XC4LL-100# | pressure gauge, 2.5in dial, SS case, 316SS tube, 1/4in lower connection, calibration cert, Plus! option, 0-100PSI range | 1 | |
| AC 25-1009SW-02L-XC4LL-10000# | pressure gauge, 2.5in dial, SS case, 316SS tube, 1/4in lower connection, calibration cert, Plus! option, 0-10,000PSI range | 1 | |
| AC 25-1009SW-02L-XC4LL-10000#/BR | Ashcroft SS Case Pressure Gauge 2.5in dial, ASME B40.100, 0-10,000PSI/Bar dual scale" | 1 | |
| AC 25-1009SW-02L-XC4LL-3000# | pressure gauge, 2.5in dial, SS case, 316SS tube, 1/4in NPT lower connection, calibration cert, Plus! option, 0-3,000PSI range | 1 | |
| AC 25-1009SW-02L-XC4LL-5000#/BR | Ashcroft SS Case Pressure Gauge 2.5in dial, 0-5,000PSI/Bar dual scale" | 1 | |
| AC 30-1084S-02L-XC4-100# | test pressure gauge, 3in dial, SS case, 316SS tube, 1/4in lower connection, calibration cert, 0-100PSI range | 1 | |
| AC 30-1084S-02L-XC4-60# | test pressure gauge, 3in dial, SS case, 316SS tube, 1/4in lower connection, calibration cert, 0-60PSI range | 1 | |
| AC 35-1009SW-02B-XC4LL-5000# | pressure gauge, 3.5in dial, SS case, 316SS tube, 1/4in NPT lower back connection, calibration cert, Plus! option, 0-5,000PSI range | 1 | |
| AC 45-1279SS-04L-XC4LL-10000# | pressure gauge, 4.5in dial, black phenolic case, 316SS tube, 1/2in lower connection, calibration cert, Plus! option, 0-3,000PSI range | 1 | |
| AC 45-1279SS-04L-XC4LL-3000# | pressure gauge, 4.5in dial, black phenolic case, 316SS tube, 1/2in NPT lower connection, calibration cert, Plus! option, 0-3,000PSI range | 1 | |
| AC 45-1279SS-04L-XC4LL-4000# | pressure gauge, 4.5in dial, black phenolic case, 316SS tube, 1/2in NPT lower connection, calibration cert, Plus! option, 0-4,000PSI range | 1 | |
| AC 45-1279SS-04L-XC4LL-5000# | pressure gauge, 4.5in dial, black phenolic case, 316SS tube, 1/2in NPT lower connection, calibration cert, Plus! option, 0-4,000PSI range | 1 | |
| AC 50-1008S-02L-600# | pressure gauge, 50mm (2in) dial, SS case, 316SS tube, 1/4in NPT lower connection, 0-600PSI range | 1 | |
| AC 63-1008A-02L-30# | pressure gauge, 63mm dial, SS case, bronze tube, 1/4in NPT lower connection, 0-30PSI range | 1 | |
| AC-B451F-12 | FILTER ELEMENT, MAIN PRESSURE FILTER | 1 | |
| AC00-0902-101 | COMPRESSOR MOTOR | 1 | |
| AC00-0902-11 | BRUSH SET, COMPRESSOR MOTOR | 1 | |
| AC21805 | COMPRESSION TOOL TO REMOVE THE SPRING | 1 | |
| AC21805000 | COMPRESSION TOOL | 1 | |
| AC21826000-1 | RIVETING TOOL (PRESSURE PLATE) | 5 | |
| AC21857000 | ADAPTING ASSEMBLY ON THE PRESS | 1 | |
| ACE 025N1 IVBP | IMO PUMP P200 PRESS FLOW | 1 | |
| ACE-233 | PORTABLE PRESSURIZED OILER | 1 | |
| ACE-500 SERIES | AIR START UNIT - COMPRESSED - TRUCK/TRAILER | 1 | |
| ACE-600-400 | AIR START UNIT - COMPRESSED - TRUCK/TRAILER | 1 | |
| ACG24/08-SILENT | AIR COMPRESSOR | 1 | |
| AD-2002-19-52 | PORTABLE WATER PRESSURE CHK TOOL | 1 | |
| AD-556124 | Fixture – Pressure Test, Propeller Shaft Assy. | 2 | |
| AD32471-1 | SWITCH, PRESSURE | 1 | |
| AD33180-1 | PRESSURE SWITCH, LOW | 1 | |
| AD33180-2 | PRESSURE SWITCH, LOW | 1 | |
| AD33180-4 | PRESSURE SWITCH, LOW | 1 | |
| AD43003 | PRESSURE CONTROLLER TEST SET | 1 | |
| AD556124-6 | PROP. BOX PRESS BENCH TEST | 1 | |
| ADA A120-612 | Static-dynamic Pressure Test Adapters | 1 | |
| ADA120-612 | STATIC-DYNAMIC PRESSURE ADAPTERS | 2 | |
| ADAG5-612HT OR AKGV | PITOT / STATIC PRESSURE TEST KIT | 1 | |
| ADC 604-945 | KIT – PITOT-STATIC PRESSURE TEST CONNECTORS (RVSM) | 7 | |
| ADC604-612 | KIT - PITOT−STATIC PRESSURE TEST | 2 | |
| ADC604-945 | KIT- PITOT-STATIC PRESSURE TEST | 7 | |
| ADC604−612 | KIT − PITOT−STATIC PRESSURE TEST | 2 | |
| ADCRJ-612 | KIT - PITOT/STATIC PRESSURE TEST CONNECTOR | 11 | |
| ADCRJ-945 | CONNECTOR KIT - PITOT STATIC PRESSURE TEST | 8 | |
| ADCRJ612 | KIT - PITOT/STATIC PRESSURE TEST CONNECTOR | 11 | |
| ADCRJ945 | CONNECTOR KIT PITOT STATIC PRESSURE TEST | 8 | |
| ADCRJ−612 | Connector Kit − Pitot Static Pressure Test | 11 | |
| ADCRJ−945 | Connector Kit − Pitot Static Pressure Test | 8 | |
| ADGE95-612 | Air Data Accessories Kit for Bombardier Global Express | 7 | |
| ADSE-746 | TEST KIT − PITOT/STATIC PRESSURE (HIGH PRECISION) | 3 | |
| ADSE746 | TEST KIT ??? PITOT/STATIC PRESSURE HIGH PRECISION | 3 | |
| ADT 102 | PRESSURE ADAPTERS SET | 1 | |
| ADT 103 | PRESSURE ADAPTERS SET | 1 | |
| ADT 104HP | PRESSURE ADAPTERS SET | 1 | |
| ADT-222B | DUAL PRESSURE SOURCE | 3 | |
| ADT-222C | DUAL PRESSURE SOURCE | 1 | |
| ADT222C | DUAL PRESSURE SOURCE | 1 | |
| ADT672-02-GP10K-PSI-N | CALLIBRATOR, DIGITAL PRESSURE | 1 | |
| ADT673-02-GP10K-PSI | DIGITAL PRESSURE CALLIBRATOR | 1 | |
| ADT681-02-CP100-PSI-B | DIGITAL PRESSURE GAUGE STANDARD | 3 | |
| ADT681-02-CP30-PSI-B | DIGITAL PRESSURE GAUGE STANDARD | 3 | |
| ADT681-02-GP300-PSI-N | DIGITAL PRESSURE TEST GAUGE | 1 | |
| ADT681-RD-GP300-PSI-N | PRESSURE GAUGE | 2 | |
| ADT681-RD-GP3K-PSI-N | PRESSURE GAUGE | 3 | |
| ADT681A-02-GP1000-PSI-N | DIGITAL PRESSURE GAUGE | 1 | |
| ADT681A-02-GP10K-PSI-N | DIGITAL PRESSURE GAUGE | 1 | |
| ADT681A-02-GP1K-PSI-N | DIGITAL PRESSURE GAUGE | 1 | |
| ADT681IS-10-GP2K-PSI-B | PRESSURE GAUGE DIGITAL (0-2000PSI) | 1 | |
| ADT681IS-10-GP3K-PSI-B | PRESSURE GAUGE DIGITAL (0-3000PSI) | 1 | |
| ADT918-B2 | PUMP-PNEUMATIC PRESSURE TEST | 1 | |
| ADTS-500 | pitot−static pressure | 3 | |
| ADTS405-1892-59-M1 | PRESSURE REGULATOR | 1 | |
| ADTS405FE | PRESSURE GENERATOR | 1 | |
| ADTS45FE | PRESSURE GENERATOR | 1 | |
| ADTS500 | Tester − Pitot Static Pressure High Precision | 3 | |
| ADTS505 | AIR DATA/PITOT STATIC GROUND PRESSURE GENERATOR | 8 | |
| ADTS542F | ADTS542F AIR DATA TEST SET / C/W ENGINE PRESSURE RATIO TEST | 6 | |
| ADTS554F | TESTER - PITOT / STATIC PRESSURE (HIGH PRECISION) | 3 | |
| ADTS554F-E0-SCAS-SR | TESTER - PITOT / STATIC PRESSURE (HIGH PRECISION) | 2 | |
| ADTS554F-E0-SCAS-SR-ANX | TESTER - PITOT / STATIC PRESSURE HIGH PRECISION | 1 | |
| ADTS554F-E3-SCAS-ER | TESTER - PITOT / STATIC PRESSURE (HIGH PRECISION) | 1 | |
| AE-05416-405 | PRESSURE TEST BRAKE DEVICE | 1 | |
| AE300T12-1 | HIGH PRESSURE PUMP REMOVAL TOOL | 1 | |
| AE721496-1 | MANG SET, HYDRSIS, PRESSURE | 1 | |
| AE73815H | CAP, PROTECTIVE, PRESSURE AND DUST | 1 | |
| AE81617K | CAP, PROTECTIVE, PRESSURE AND DUST | 2 | |
| AE82049G | CAP, PROTECTIVE, PRESSURE, DUST | 4 | |
| AE94482P | COUPLING LOW PRESSION | 1 | |
| AE95074N | COUPLING PRESS QUICK DISC | 6 | |
| AE95075N | COUPLING HIGH PRESSION | 1 | |
| AE99119G | HYDRAULIC POWER PRESSURE FEMALE COUPLING | 4 | |
| AE99138G | 1000 PSIG LOW PRESSURE COUPLINGS | 1 | |
| AEM9723 | HAR DAV OIL PRESS IND LAMP WR | 1 | |
| AER-024 | PRESSURE GAUGE | 1 | |
| AETL36400 | SPRING COMPRESSION TOOL | 1 | |
| AF-4156/.375H | LF REFLECTION PROBE .375 HEIGHTPRESSURE BULKHEAD TEA MD80) 6.0" PIG TAIL TRIAX FISCHER CONNECTOR 5-10KHZ INSPECT@ 7KHZ | 1 | |
| AF-4156/.625H | LF REFLECTION PROBE .625 HEIGHT (PRESSURE BULKHEAD TEA MD80)6.0" PIG TAIL TRIAX FISCHER 5-10KHZ INSPECT@7KHZ | 1 | |
| AF/M34R-3 | CABIN PRESSURE TESTER | 1 | |
| AFC-0525 | GENERAL PURPOSE 5MHZ 1/4"Ø COMPRESSION. STRAIGHT BEAM TRANSDUCER. SIDE MOUNT MICRODOT CONNECTOR, KNURLED CASE SIZE: .500"H x .394Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| AFC-0529S | GENERAL PURPOSE 5MHZ 1/4"Ø COMPRESSION. STRAIGHT BEAM TRANSDUCER. SIDE MOUNT MICRODOT CONNECTOR, KNURLED CASE SIZE: .750"H x .400Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| AFC-1025-6 | 10mm DIA. HIGH DAMPED COMPRESSION TRANSDUCER 0 DEGREES. 10 MHz .25" DIA. ELEMENT..(CASE SIZE .393"O.D. x .625"H) KNURLED | 1 | |
| AFC-1174 | 0 degree straight beam contact compression transducer side microdot connector. (15-20mm tall by 10-12.5mm dia.) Acuscan style (medium damped). Includes Test Report and Certificate of Conformance. | 1 | |
| AFC-K1SM | 1.0 MHz 1.0 inch diameter element straight beam compression transducer used for the inspection of composite materials. | 2 | |
| AFC160-25RC | PRESSURE GAUGE | 1 | |
| AFM24T3 | CABIN PRESSURE TESTER | 1 | |
| AFM32R3 | TRAILER COMPRESSED GAS | 1 | |
| AFNDT-3157 | Liquid Penetrant Standard. Meets the ASME Boiler Pressure Code, Section V & III, and MIL-I-23135-C. The cracked aluminum block is made from 2024 aluminum and is 3” x 2” x 3/8” thick. A 1/8" wide groove separates the blocks two sides to facilitate side-... | 1 | |
| AFR2000 | LP COMPRESSOR AIR PRESSURE REGULATOR (150 PSI) | 1 | |
| AFT6355B0001-01-01 | BEARING PRESSING TOOL | 1 | |
| AFT6355B0001-01-02 | BEARING PRESSING TOOL | 1 | |
| AG21-99-33-S | PRESSURE GAUGE | 1 | |
| AGD-32 | GAS BOOSTER / SURPRESSEUR | 1 | |
| AGE- 00511-401 | PROTECTIVE NET, PRESSURIZATION TEST-CANOPY | 1 | |
| AGE-003841-401 | BRAKE PRESSURE HOSE TOOL | 1 | |
| AGE-00833-401 | PRESSURE GAUGE ASSY | 1 | |
| AGE-01103-401 | KIT/CABIN PRESSURE | 2 | |
| AGE-01524-401 | ADAPTER - CABIN PRESSURIZATION TEST | 2 | |
| AGE-01601-401 | PRESSURE GAUGE ASSY | 1 | |
| AGE-01602-401 | PRESSURE GAUGE ASSEMBLY | 2 | |
| AGE-01605-401 | adapter-cabin pressurization test | 1 | |
| AGE-02480-401 | KIT CABIN PRESSURE | 3 | |
| AGE-02532-401 | KIT, BRAKE PRESSURE MEASUREMENT | 1 | |
| AGE-03003-401 | ADAPTER-PRESSURIZATION TEST | 1 | |
| AGE-03749-401 | KIT/CABIN PRESSURE | 5 | |
| AGE-03841-401 | HOSE ASSY - MEAS, BRAKE PRESSURE | 9 | |
| AGE-03841401 | SET. BRAKE PRESSURE MEASUREMENT | 9 | |
| AGE-03842-401 | HOSE ASSY, COMPRESSOR WASHING DRAINAGE-ENGINE | 1 | |
| AGE-04091-001 | TEST PLUG,PRESSURE | 1 | |
| AGE-04091-003 | TEST PLUG,PRESSURE | 1 | |
| AGE-04091-401 | PLUG-TEST, PRESSURIZATION VALVE | 4 | |
| AGE-04254-401 | PRESSURE GAUGE ASSY | 1 | |
| AGE-04713-401 | ADAPTER - PRESSURI-ZATION TEST, CABIN | 4 | |
| AGE-04713-401 / GSE-017 | CABIN PRESSURE TEST ADAPTER - EMBRAER | 1 | |
| AGE-05416-401 | DEVICE - PRESSURE TEST, BRAKE | 1 | |
| AGE-05416-405 | DEVICE - PRESSURE/BLEED TEST, BRAKE | 2 | |
| AGE-05416-405 | HOSE ASSY,MEAS,BRAKE PRESSURE | 2 | |
| AGE-10060 | COMPRESSOR, SPRING | 2 | |
| AGE-11808 | SPRING COMPRESSOR | 2 | |
| AGE-11820 | FIXTURE, COMPRESSION ASEEMBLY | 2 | |
| AGE-13093 | FIXTURE, COMPRESSION ASEEMBLY | 3 | |
| AGE-1602-401 | PRESSURE GAUGE ASSEMBLY | 1 | |
| AGE01524-401 | ADAPTER, CABIN PRESSURE(GSE198) | 2 | |
| AGE03841-401 | MEASUREMENT KIT, BRAKE PRESSURE | 9 | |
| AGE04091-401 | PLUG-TEST, PRESSURIZATION VALVE | 4 | |
| AGE04713-401 | ADAPTER: TEST,CABIN PRESSURE, | 4 | |
| AGE10060 | Spring Compressor | 2 | |
| AGE10069 | FIXTURE, PRESSURE TEST | 2 | |
| AGE10260 | COMPRESSOR FIXTURE, VALVE SPRING | 1 | |
| AGE10345 | SPRING COMPRESSOR | 2 | |
| AGE11357 | DELTA PRESSURE TEST FIXTURE | 2 | |
| AGE11358 | FIXTURE, DELTA P PRESSURE TEST | 2 | |
| AGE11808 | SPRING COMPRESSOR | 2 | |
| AGE11820 | ASSEMBLY FIXTURE COMPRESSION TOOL | 2 | |
| AGE12097 | PRESS PAD | 1 | |
| AGE12114 | PRESS PAD | 1 | |
| AGE12296 | ASSY,PRESS PAD | 1 | |
| AGE12854/AGE13154 | DIFFERENTIAL PRESSURE INDICATOR TEST FIXTURE | 1 | |
| AGE13093 | FIXTURE, COMPRESSION ASEEMBLY | 3 | |
| AGE13151 | Face Seal Press Fit Jig | 1 | |
| AGE13153 | FILTER PRESSURE SWITCH | 1 | |
| AGE13188 | SPRING COMPRESSOR | 1 | |
| AGE13593 | PRESSURE LEAK TEST FIXTURE | 2 | |
| AGE13836 | DRIVER, SPRING COMPRESSION | 1 | |
| AGE14092 | FIXTURE, PRESSURE TEST, ASSEMBLY | 2 | |
| AGE15187 | PRESSURE DROP HOLDING FIXTURE | 1 | |
| AGE15707 | PRESSURE TEST | 1 | |
| AGE16551 | FIXTURE, SPRING COMPRESSION | 1 | |
| AGE17077-B | TRONAIR RAT Ground Test Tool, For GTT Pressure Monitoring Box, 5000 psi | 5 | |
| AGE17077B | TRONAIR RAT Ground Test Tool, For GTT Pressure Monitoring Box, 5000 psi | 5 | |
| AGE18121 | PRESSURE SWITCH WRENCH | 1 | |
| AGE18380 | RAT PRESSURE MONITOR TOOL | 3 | |
| AGE19266 | COMPRESSION FIXTURE | 1 | |
| AGE70046 | LOAD COMPRESSOR-EDDY CURRENT MASTER | 1 | |
| AGE70047 | GENERATOR COMPRESSOR-EDDY CURRENT | 1 | |
| AGE70521 | GEARBOX PRESS AND PULL SET | 1 | |
| AGE70535 | PISTON RING COMPRESSION TOOL | 1 | |
| AGEI0060 | COMPRESSOR, SPRING | 1 | |
| AGEâ?01602â?401 | PRESSURE GAUGE ASSY | 2 | |
| AGS3013/B | PRESSURISING UNION | 1 | |
| AGS3123-502 | PRESSURE TEST KIT | 1 | |
| AGSE-C049-G02 | LOW PRESSURE TURBINE (LPT) MAJOR MODULE 3 SHIPPING CONTAINER -CFM56-5B, CFM56-5C & CFM56-7B ENGINES | 1 | |
| AHM7280 | PLATE,PRESSURE;|U/O AIRCRAFT BRAKE SYSTEM EQUIP.; | 1 | |
| AID- 01480 | CARBON PRESS TOOL | 1 | |
| AID-00348 | VALVE COMPRESSION TOOL | 1 | |
| AID-00562 | STARGEAR SHAFT PRESS TOOL | 1 | |
| AID-00804 | Piston ring compression tool (squirrel cage) | 1 | |
| AID-00804 | PISTON RING COMPRESSION TOOL | 1 | |
| AID-00845 | Piston ring compression tool(turbine nozzle) | 1 | |
| AID-00915 | PRESS TOOL SLEEVE | 1 | |
| AID-00936 | PRESS ARBOR | 1 | |
| AID-01027 | Cardbon Press Tool | 1 | |
| AID-01097 | TURBINE NOZZLE PISTON RING COMPRESSION T | 1 | |
| AID-01097 | PISTON RING COMPRESSION TOOL | 1 | |
| AID-01141 | GEARBOX PRESS AND PULL SET | 1 | |
| AID-01480 | CARBON PRESS TOOL | 1 | |
| AIP12-00202 | VALVE SPRING COMPRESSOR | 1 | |
| AIP12-02344 | COMPRESSION DIFFERENTIAL TEST | 1 | |
| AIP12-02346 | DIFFERENTIAL PRESSURE TESTER | 1 | |
| AIP12-02347 | DIFFERENTIAL PRESSURE TESTER | 1 | |
| AIP12-21520 | LYC VALVE SPRING COMPRESSOR | 1 | |
| AIRCOMPRESSOR-150L | 50 LTR AIR COMPRESSOR, 220V | 1 | |
| AIRHOSE35 | AIR PRESSURE HOSE 25 | 2 | |
| AISI316 | PRESSURE GAUGE FOR POD SERVICING KIT | 1 | |
| AIT1200001 | Gauge Engine Oil Pressure | 1 | |
| AIT120001 | GAUGE ENGINE OIL PRESS | 5 | |
| AIT32000-003-2 | TOOL-COMPRESSION | 1 | |
| AIT320008-00-3-4 | TOOL COMPRESSION | 4 | |
| AIT320008-003 | TOOL-COMPRESSION | 1 | |
| AIT320008-003-01 | COMPRESSION TOOL | 1 | |
| AIT320008-003-02 | COMPRESSION | 1 | |
| AIT320008-003-04 | TOOL-COMPRESSION | 1 | |
| AIT320008-003-1 | TOOL, COMPRESSION | 1 | |
| AIT320008-003-2 | TOOL, COMPRESSION | 3 | |
| AIT320008-003-3 | TOOL-COMPRESSION | 1 | |
| AIT320008-003-4 | TOOL-COMPRESSION | 4 | |
| AIT320020-001 | BOGIE COMPRESSION TOOL | 2 | |
| AIT320020-002 | MLG BOGIE COMPRESSION TOOL A350 | 1 | |
| AJW-109A | ENGINE COMPRESSOR WASHING SYSTEM | 1 | |
| AJW-109A/114B | ON-WING ENGINE COMPRESSOR WASHING SYSTEM | 2 | |
| AJW-114B | ON-WING ENGINE COMPRESSOR WASHING SYSTEM | 1 | |
| AJW-114C | ON-WING ENGINE COMPRESSOR WASHING SYSTEM | 1 | |
| AKS-292 | Compressor | 1 | |
| AKS-3801 | Spring Compressor | 1 | |
| AKS3801 | SPRING COMPRESSOR | 1 | |
| AL120-05-DN24 | PRESSURE COUPLING | 1 | |
| ALB570BSN | PRESSURE BRAKE BLEEDER 3.5BAR | 1 | |
| ALB570BSN-3 | PRESSURE REGULATOR | 1 | |
| ALB580A | PRESSURE BLEEDER 6L ANALOGUE | 1 | |
| ALG5A02 | TIRE PRESSURE GAUGE (45-300 PSI) | 1 | |
| ALG5H04 | TIRE PRESSURE GAUGE 45-300PSI | 1 | |
| AM-32-18A | COMPRESSOR SPRAYING UNIT | 1 | |
| AM020906/200 | TIRE INFLATION ADAPTER AND PRESSURE GAUGE | 1 | |
| AM20227 | PRESSING-OUT MANDREL | 1 | |
| AM20747 | RING, PRESSURE (MAIN) | 1 | |
| AM20749 | RING, PRESSURE (NOSE) | 1 | |
| AM20906 | GAUGE - TIRE PRESSURE | 1 | |
| AM23076 | TOOL - COMPRESSION | 1 | |
| AM29343 | DRIVE BLOCK PRESSING-IN TOOL | 1 | |
| AM29364 | Drive block pressing (in tool) | 1 | |
| AM29725 | DRIVE BLOCK PRESSING IN TOOL | 1 | |
| AM29726 | DRIVE BLOCK PRESSING-IN TOOL | 1 | |
| AMCH-6 | PRESSURE CAP - QUICK DISCONNECT | 1 | |
| AMI-TW60 | PowerAll Systems TW60 Turbine Engine Compressor Washer | 1 | |
| AMI-TW60-WAND | PowerAll Systems PAS-TW60-WAND Pratt & Whitney PT-6 Compressor Wash Ring | 1 | |
| AMM281300-514 | PRESSURE GAUGE TRIM TANK VAPOR SEAL | 1 | |
| AMO147 | TYRE PRESSURE GAUGE | 1 | |
| AN15925 | GAUGE, PRESSURE 0-230PSI | 1 | |
| AN5619-12 | PRESSURE TEST | 1 | |
| AN6015-2 | VALVE HIGH PRESSURE OXYGEN CHECK | 1 | |
| AN806 | HYDRAULIC BLANKING KIT >3000 PSI ON ALL PRESSURE BLANKS | 1 | |
| AN806-32D | PRESSURE PLUG 37 DEG FLARED, ALUMINIUM | 1 | |
| AN806-6D | ALUMINIUM PRESSURE PLUG | 14 | |
| AN929 | HYDRAULIC BLANKING KIT >3000 PSI ON ALL PRESSURE BLANKS | 1 | |
| AN929-3 | ALI CAP ASSY, PRESSURE SEAL FLARED TUBE FITTING | 7 | |
| AN929-3D | ALI CAP ASSY, PRESSURE SEAL FLARED TUBE FITTING | 5 | |
| AN929-4 | CAP ASSY-.25 TUBE-PRESS. SEAL | 10 | |
| AN929-4D | ALUMINIUM PRESSURE CAP ASSY | 11 | |
| AN929-4J | CAP ASSÕY PRESSURE SEAL 1/4Ó TUBING | 23 | |
| AN929-5 | CAP,ASSY,PRESSURE SEAL FL | 14 | |
| AN929-5D | ALI CAP ASSY, PRESSURE SEAL FLARED TUBE FITTING | 10 | |
| AN929-5J | CRES CAP ASSY, PRESSURE SEAL FLARED FITTING | 12 | |
| AN929-6 | CAP ASSY-.38 TUBE-PRESS. SEAL | 15 | |
| AN929-6D | ALUMINIUM PRESSURE CAP ASSY | 12 | |
| AN929-6J | CAP ASSY, PRESS SEAL, FLARED TUBE FTG | 18 | |
| AN929-8D | ALI CAP ASSY, PRESSURE SEAL FLARED TUBE FITTING | 8 | |
| AN929−6 | CAP INSERT, ASSEMBLY, PRESSURE SEAL, FLARED TUBE FITTING | 15 | |
| AND-MAN-0002 | REGULATOR PRESS | 1 | |
| ANDT 3016-B | REF STD, BS 1016 AFT PRESS BLKD "Y" CHOR | 4 | |
| ANNEST IWATA 77 | SPRAY GUN (HIGH PRESSURE) | 1 | |
| ANT-ICE-PRESSURE | ANT-ICE PRESSURE TOOL | 1 | |
| AO100278 | Pressing-out Mandrel | 1 | |
| AO100278PM | PRESSING-OUT MANDREL | 1 | |
| AO102081 | Mandrel and base assy (Splined sleeve pressing) | 2 | |
| AO107207 | SLEEVE, BEARING PRESS IN | 1 | |
| AO107249 | Pressing - in sleeve | 1 | |
| AO107252 | SLEEVE, PRESSING IN | 1 | |
| AO108997 | BEARING PRESS | 2 | |
| AO108997PM | BEARING PRESS | 1 | |
| AO110629 | BEARING CUP PRESSING IN SLEEVE | 1 | |
| AO110632 | PRESSING-IN SLEEVE FOR SMALL BEARING | 1 | |
| AO111245 | Pressing in Sleeve for the Bearing | 2 | |
| AO111245PM | PRESSING-IN SLEEVE FOR THE BEARING | 1 | |
| AO125133 | PRESSING-IN SLEEVE FOR LARGE BEARING | 1 | |
| AO45784 | COLLAR, PRESSING IN | 1 | |
| AO45979 | Pressing out mandrel | 2 | |
| AORP 384 2114 | PRESSURE LIMITER 25 A 80 BAR | 1 | |
| AP-0 | Heavy-Duty Arbor Presses (Pulling heads included:: 0.5 ton) (Capacity: 4" High 6-5/8" Dia.) (Height: 10" (25.4 cm)) (Add to cart: Add To Cart) | 1 | |
| AP-01 | COMPREHENSIVE PRESSURE TESTING KIT DESIGNED FOR INFLATABLE SAFETY EQUIPMENT, INCLUDING LIFE VESTS AND SLIDES. | 1 | |
| AP-1 | Heavy-Duty Arbor Presses (Pulling heads included:: 0.5 ton) (Capacity: 4" High 6-5/8" Dia.) (Height: 10" (25.4 cm)) (Add to cart: Add To Cart) (Pulling heads included:: 1.0 ton) (Capacity: 5" High 8" Dia.) (Height: 12" (30.5 cm)) (Add to cart: Add To Cart | 1 | |
| AP-2 | Heavy-Duty Arbor Presses (Pulling heads included:: 0.5 ton) (Capacity: 4" High 6-5/8" Dia.) (Height: 10" (25.4 cm)) (Add to cart: Add To Cart) (Pulling heads included:: 1.0 ton) (Capacity: 5" High 8" Dia.) (Height: 12" (30.5 cm)) (Add to cart: Add To Cart | 1 | |
| AP-XXX320-1 | WHEEL HALF COMPRESSOR KIT | 1 | |
| AP150-010-000-1 | GROUND CHECK PRESSURE SOURCE | 1 | |
| APA97632M1-4-4-4 | SMARTPROBE PRESSURE ADAPTER PART NUMBER:APA97632M1-4-4-4 | 1 | |
| APC-1-25W331101 | MAIN ENTRY DOOR AIR SPRING COMPRESSION TOOL | 1 | |
| APC-4AS-2710001-450 | NLG SHOCK ABSORBER COMPRESSION TOOL | 1 | |
| APCENG-301004-2 | ADAPTER -COMPRESSOR HOSE TO ABAS KIT | 1 | |
| API/GE90/A/3535 | ENGINE COMPRESSOR WASHER | 1 | |
| APN 6552-S54-1 | Arbor Press Tooling | 1 | |
| APN 6552-T51-1 | ARBOR PRESS | 1 | |
| APT-001-300 | TIRE PRESSURE GAUGE | 1 | |
| APT-20-1000-200G | PRESSURE TRANSDUCER | 1 | |
| APT-20-1000-60G | PRESSURE TRANSDUCER | 1 | |
| APU-PX-TEST-GAUGE | APU PRESSURE TEST GAUGE TOOL | 1 | |
| AR 4728-1 | DECOMPRESSION TEST SIMULATOR | 7 | |
| AR220-215 | PRESSURE SEAL GLOBE VALVES | 1 | |
| AR220-80 | PRESSURE SEAL GATE VALVE | 1 | |
| AR4723-1 | TEST TOOL PRESSURE SENSOR | 1 | |
| AR4728-1 | O2 DEPRESSION TEST TOOL | 7 | |
| ARB-00816 | Bearing race installation tool (hydraulic press) | 1 | |
| ART163 | TEST LINE PRESSURE TEST | 1 | |
| AS 30 T | SCREW COMPRESSOR | 1 | |
| AS0403004 | PRESSURE REDUCER O2 | 1 | |
| AS0403011 | PRESSURE REDUCER N2 HIGH | 1 | |
| AS0403021 | PRESSURE REDUCER N2 LOW | 1 | |
| AS2190216 | GAUGE-PRESSURE,0-75 PSIG(0-518KPA) | 1 | |
| AS21914C | AS21914C - CAP, PRESSURE SEAL, FLARELESS TUBE FITTIN | 1 | |
| AS350 | COMPRESSOR WASH KIT (B3 HELICOPTER) | 1 | |
| AS5231J10 | PLUG - HYDRAULIC PRESSURE TUBE, 5/8 INCH LINE, CORROSION RESISTANT STEEL | 1 | |
| AS5233V04P | PRESSURE SEAL CAP | 1 | |
| AS5233V06P | CAP ASSEMBLY - PRESSURE SEAL, FLARELESS TUBE, STD- | 1 | |
| AS5233W05A | FLOW FUSE PRESSURE CAP | 1 | |
| ASHCROFT 63-5008 | PRESSURE GAUGE 0-4 BAR | 1 | |
| ASP180 | AIR START, TURBINE COMPRESSOR - CART | 1 | |
| ASP250 | AIR START, TURBINE COMPRESSOR - CART | 1 | |
| ASP300 | AIR START, TURBINE COMPRESSOR - CART | 1 | |
| AST-P2A2360 | TOOL, DRILL PRESS SWAGING | 1 | |
| AST1008 | DRILL PRESS | 1 | |
| AST4494C | OIL PRESSURE TEST KIT | 1 | |
| ASU-600-180 | AIR START, TURBINE COMPRESSOR - CART | 1 | |
| ASU-600-200 | AIR START, TURBINE COMPRESSOR - CART | 1 | |
| ASU-600-270 | AIR START, TURBINE COMPRESSOR - CART | 1 | |
| ASU-600-300 | AIR START, TURBINE COMPRESSOR - CART | 1 | |
| ASU-600-400 | AIR START, TURBINE COMPRESSOR - CART | 1 | |
| AT-00049-001 | Compression Ring | 1 | |
| AT-00049-002 | Compression Ring | 1 | |
| AT-3346 | FIXTURE PRESSING | 1 | |
| AT-425 | DRILL PRESS | 1 | |
| AT092774 | HYD HI-PRESS | 6 | |
| AT1 1 1 9 | BEARING PRESSING FIXTURE, | 1 | |
| AT2109 | Pressure test Fitting | 1 | |
| AT2109 PM | PRESSURE TEST FITTING | 1 | |
| AT31848 | TOOL-SPRING COMPRESSION, NLG DRAG BRACE | 3 | |
| AT31849 | TOOL-SPRING COMPRESSION, MLG STABILIZER BRACE | 7 | |
| AT31849-IAS | TOOL SPRING COMPRESSION | 1 | |
| AT3294 | FIXTURE, BEARING PRESSING, APU | 1 | |
| AT360-16 | COMPRESSION FITTING | 1 | |
| AT4295-14 | ADAPTER PRESSING | 1 | |
| AT4295-4 | ADAPTER PRESSING | 1 | |
| AT5118 | Press Stop | 1 | |
| AT5231 | Shaft Pressing Aid | 1 | |
| AT5231 PM | SHAFT PRESSING AID | 1 | |
| AT5231-T | SHAFT PRESSING AID | 1 | |
| AT5231PM | SHAFT PRESSING AID | 1 | |
| AT5276 | PRESS FIXTURE | 1 | |
| AT5426 | PIN PRESSING FIXTURE, | 1 | |
| AT5766 | SPRING COMPRESSOR | 1 | |
| AT5767 | RING COMPRESSOR | 1 | |
| AT66-22805 | Pressing Tool | 1 | |
| AT700-2 | TESTER - PITOT / STATIC PRESSURE (HIGH PRECISION) | 3 | |
| ATE2730-001 | PLATE-BLANKING,PRESSURE SWITCH | 1 | |
| ATG300 | GAUGE TIRE PRESSURE | 1 | |
| ATH005 | Pressure Gauge | 1 | |
| ATI-300 | GAUGE TIRE PRESSURE | 1 | |
| ATI-330 | TIRE PRESSURE GAGE | 1 | |
| ATI540-5 | PRESSURE PLATE (NAIL TAKER) | 2 | |
| ATPG/300/C/2/AB | TIRE PRESSURE GAUGE SET 300 PSI | 1 | |
| ATPG/400/C/2/AB | AIRCRAFT TIRE PRESSURE GAUGE 0-400 PSI | 1 | |
| ATPG/400/C2/AB | PRESSURE GAGE | 1 | |
| ATR-72-10/03-1001031 | COMPRESSOR WASH KIT ATR | 1 | |
| ATR72-10/03-1001031 | ADAPTOR- COMPRESSOR WASH | 1 | |
| ATS 2E | ATS PRO DIFFERENTIAL CYLINDER PRESSURE TESTER (18MM) | 1 | |
| ATS PRO 12-03330 | ENGINE COMPRESSOR TESTER KIT | 1 | |
| AUSTRALIA-16 | PRESSURE GAUGE | 1 | |
| AV13000DTGK | TYREPRESSURE MANOMETERS | 1 | |
| AV1300ATI | TIRE PRESSURE CALIBRATOR | 1 | |
| AV2011 | HIGH PRESSURE CHARGING CONNECTION | 1 | |
| AVI300ATGSL | ANALOG TIRE PRESSURE INFLATOR | 2 | |
| AVI300ATI | ANALOG TIRE PRESSURE GAUGE | 2 | |
| AVI300DTGK | DIGITAL TIRE PRESSURE GAUGE | 1 | |
| AVI300DTI | TYRE PRESSURE GAGE (0-300PSI) | 1 | |
| AW2044AB01 | GAUGE NITROGEN PRESSURE | 1 | |
| AW2044AB02 | NITROGEN PRESSURE GAGE | 1 | |
| AW30-N03-Z | 2. PRESSURE REGULATOR | 1 | |
| AYS2QTPP1.0 | 2QT PRESSPOTKIT LPH200-106LVP | 1 | |
| AYS2QTPP1.2 | 2QT PRESSPOTKIT LPH200-126LVP | 1 | |
| AYS6003B | 2 QUART PRESSURE POT | 1 | |
| AZL02207-R00 | COMPRESSED AIR HOSE COMPR. 20 METERS 300 PSI ¿ FIXED QUICK COUPLING AND 3-8 CONNECTORS | 1 | |
| Air Pressure Regulator | Air Pressure Regulator | 1 | |
| B-405 | VESSEL, PRESSURE | 1 | |
| B-QC4-D-4AN | FITTING: PRESSURE,CONNECT,QUICK,BR, | 6 | |
| B0027-00-3109-00 | LATCH MECH DEPRESSION TOOL | 1 | |
| B07668 | PRESSURE GAUGE | 1 | |
| B07923 | PRESSURE GAUGE | 1 | |
| B07924 | PRESS GAUGE | 1 | |
| B1727A | PRESSURE REGULATOR | 1 | |
| B19750-1 | TOOL HIGH PRESSURE CAP | 1 | |
| B19750-1 OR TO3836 | HIGH PRESSURE CHUCK B19750-1 OR TO3836 | 1 | |
| B20-3BP | COMPRESSOR WASH ADAPTER | 2 | |
| B21001 | CLAMP -0 RELIEF VALVE HOLD OPEN, UNPRESSURIZED | 1 | |
| B21001-1 | CLAMP - HOLD OPEN UNPRESSURIZED FLIGHT RELIEF VALVE | 7 | |
| B21001-2 | UNPRESS FLT RELIEF VALVE TOOL | 1 | |
| B21002-22 | TEST EQUIP-CABIN PRESS. AIR SEALS | 2 | |
| B21004 | TEST EQUIPMENT -0 CABIN PRESSURE LEAK CHECK | 1 | |
| B21004-86 | Cabin Pressure Leak Test | 1 | |
| B21004-91 | TEST EQUIPMENT CABIN PRESS. LEAK CHE | 1 | |
| B221075T-1 | DECOMPRESSION LATCH TESTER TOOL | 15 | |
| B221075T–1 | C&D DECOMPRESSION LATCH TESTER | 15 | |
| B221075T−1 | C&D DECOMPRESSION LATCH TESTER | 15 | |
| B240B | THROTTLE DEPRESSOR | 1 | |
| B25004-1 | LIFE RAFT DOOR COMPRESSION SPRING - REMOVAL/INSTALLATION TOOL | 2 | |
| B26002-1 | PRESSURE TEST EQPT | 25 | |
| B26002-13 | PRESSURE TEST EQUIPMENT | 3 | |
| B26003-3 | PRESSURE TEST, ENG FIRE | 3 | |
| B26003-3-HM | PRESSURE TEST, ENG FIRE | 1 | |
| B27027 | PRESSURE FITTING -0 FLAP TRANSMISSION, T.E. | 1 | |
| B27027-1 | PRESSURE FITTING - FLAP TRANSMISSION, TRAILING EDGE | 1 | |
| B27032 | COMPRESSOR -0 POGO ROD, ELEVATOR PCU | 1 | |
| B27032-10 | COMPRESSOR ASSY | 1 | |
| B27032-9 | COMPRESSOR - ELEVATOR PCU POGO ROD | 15 | |
| B27032-9-M | POGO ROD COMPRESSOR | 1 | |
| B27046-6 | Compressor, Elevator Pogo | 5 | |
| B27076 | PRESSURE GAGE -0 DEPR MODULE PRI VALVE, | 1 | |
| B27076-1 | Pressure Gauge | 1 | |
| B27076-6 | PRESSURE GAGE - DEPRESSURIZATION MODULE PRIORITY VALVE, FLAP/SLAT | 5 | |
| B27076-6 | PRESSURE GAUGE | 5 | |
| B27076-7 | Pressure gage assy | 1 | |
| B28005 | PRESSURE PLUG EQPT FUEL SYSTEM | 1 | |
| B28005-1 | PRESSURE PLUG EQUIPMENT - FUEL SYSTEM | 5 | |
| B28005-1-M | PRESSURE EQUIPMENT | 1 | |
| B28005-2 | PRESSURE PLUG EQUIPMENT - FUEL SYSTEM | 2 | |
| B28005-27 | PRESSURE PLUG EQUIPMENT - FUEL SYSTEM | 6 | |
| B28005-27-M | PRESSURE PLUG EQPT | 1 | |
| B28005-40 | PRESSURE PLUG EQUIPMENT - FUEL SYSTEM | 3 | |
| B28005-41 | PRESSURE PLUG EQUIPMENT - FUEL SYSTEM | 5 | |
| B28005-42 | PRESSURE PLUG EQUIPMENT - FUEL SYSTEM | 8 | |
| B28005-5 | PRESSURE TEST TOOL | 1 | |
| B28005-70 | Pressure plug eqpt-fuel system | 4 | |
| B28007 | PRESSURE TEST ADAPTERS -0 ENGINE FUEL FEED | 1 | |
| B28007-1 | PRESSURE TEST ADAPTERS - ENGINE FUEL FEED | 4 | |
| B28007-2 | PRESSURE TEST ADAPTERS - ENGINE FUEL FEED | 5 | |
| B28008 | PRESSURIZATION EQPT -0 WING DRY BAY, FUEL LEAK | 1 | |
| B28008-1 | Pressurisation Equipment | 1 | |
| B28008-10 | PRESSURIZATION EQUIPMENT - WING DRY BAY, FUEL LEAK DETECTION | 2 | |
| B28500 | TEST KIT PIPE PRESSURE | 1 | |
| B29002-1 | Lock, Reservoir Depressurization Valve | 14 | |
| B29002-5 | LOCK FOR THE RESERVOIR DEPRESSURIZATION VALVE | 14 | |
| B29003 | OVHL EQPT -0 HYD FILTER, PRESSURE & RETURN | 1 | |
| B29003-1 | OVAL EQPT-HYD FILTER,PRESSURE&RETURN MODULE | 1 | |
| B29003-8 | OVERHAUL EQUIPMENT - HYDRAULIC FILTER, PRESSURE AND RETURN MODULE | 1 | |
| B32019-1 | THIS STRAP ASSEMBLY IS USED TO LOCK THE NLG SHOCK STRUT INTO A DEPRESSURIZED POSITION DURING GROUNDMAINTENANCE OPERATIONS. | 11 | |
| B32061 | SPRING COMPRESSION EQPT -0 NWS CONTROL | 1 | |
| B32061-1 | SPRING COMPRESSION EQUIPMENT - NOSE WHEEL STEERING CONTROL | 1 | |
| B36004 | PLUG EQPT -0 PRESSURE TEST, L.P. DUCTS | 1 | |
| B36004-1 | PLUG EQUIPMENT - PRESSURE TEST, LOW PRESSURE DUCTS | 2 | |
| B370 | THROTTLE DEPRESSOR | 1 | |
| B40-926377 | SCREW,COMPRESS | 1 | |
| B405 | PRESSURE VESSEL, | 1 | |
| B42365-1-TF | PROOF PRESSURE TEST FIXTURE | 1 | |
| B43345-1 | TEST TOOL-PRESSURE,REGULATOR | 1 | |
| B50 | INDUSTRIAL NITROGEN BOTTLEAM: 22,9CM / CONNECTION CGA580/ PRESSION:3000PSI (207BARS)/SIZE 44 | 1 | |
| B500 | COMMERCIAL INDUSTRIAL NITROGEN BOTTLEAM: 22,9CM / CONNECTION CGA580/ PRESSION:3000PSI (207BARS)/SIZE 44 | 1 | |
| B52017 | COMPRESSER -0 SPRING, PASSENGER DOOR | 1 | |
| B52017-1 | COMPRESSOR - SPRING, PASSENGER DOOR COUNTERBALANCE | 4 | |
| B52017-1-M | COMPRESSER -0 SPRING, PASSENGER | 1 | |
| B623M4003101D343-01 | PRESSING-IN TOOL | 1 | |
| B632P1001101 | PRESSURE TEST CASE | 1 | |
| B65723156Z | TOOL PRESS IN | 1 | |
| B65723157Z | TOOL PRESS IN | 1 | |
| B71004-37 | ADAPTER EQUIPMENT – LOAD TEST, PRESSURE RELIEF DOOR LATCH | 1 | |
| B710044-28 | ADAPTER EQUIPMENT LOAD TEST PRESSURE RELIEVE DOOR LATCH | 1 | |
| B71034 | TEST EQUIPMENT-ENGINE PRESSURE MONITORING | 1 | |
| B71034-13 | TEST EQUIPMENT - ENGINE PRESSURE MONITORING | 1 | |
| B71034-22 | TEST EQPT-ENG PRESS. | 1 | |
| B71034-29 | TEST EQUIPMENT - ENGINE PRESSURE MONITORING | 4 | |
| B71034-34 | GAGE,PRESSURE,DIAL INDICATING | 1 | |
| B71034-40 | TEST EQUIPMENT - ENGINE PRESSURE MONITORING | 3 | |
| B71034-48 | TEST EQUIPMENT - ENGINE PRESSURE MONITORING | 2 | |
| B71034-63 | TEST EQUIPMENT - ENGINE PRESSURE MONITORING | 4 | |
| B71043 | TEST EQUIPMENT -0 FUEL PUMP PRESSURE, PW2000 | 1 | |
| B71043-1 | TEST EQUIPMENT - FUEL PUMP PRESSURE, PW2000 SERIES ENGINES | 4 | |
| B71044 | ADAPTER EQUIPMENT-LOAD TEST,PRESSURE RELIEF DOOR LATCH | 1 | |
| B71044-10 | Adapter Equipment - Load Test, Pressure Relief Door Latch | 7 | |
| B71044-28 | Adapter Equipment - Load Test, Pressure Relief Door Latch | 13 | |
| B71044-37 | ADAPTER EQUIPMENT - LOAD TEST, PRESSURE RELIEF DOOR LATCH | 3 | |
| B717-805 | WASH PREP: Exhaust Vent PLUG, left side, aft of Lg. Pressure Gate | 1 | |
| B717-809 | WASH PREP: Pressure Gate STICKER, left side,12" dia. (set of 2) | 1 | |
| B717-810 | WASH PREP: Lg. Pressure Gate STICKER, aft of wing, left side, 18" dia. | 1 | |
| B757-BLEED-AIR-SYSTE | PRESSURE GAUGES FOR BLEED AIR SYSTEM | 1 | |
| B78013-4 | Compressoray | 2 | |
| B791-A0008 | BOOST PRESSURE SWITCH | 1 | |
| B809-1004 | SENDER, OIL PRESSURE | 1 | |
| B903-38E93 | PRESSURE SWITCH POSITION INDICATOR | 1 | |
| BA-P1271 | SPRING, COMPRESSION | 1 | |
| BA2604 | TYRE PRESSURE GAUGE NEWBOW TOOL | 5 | |
| BA2604-D | TYRE PRESSURE GAUGE | 1 | |
| BA2604/504 | TIRE PRESSURE GAUGE, 500 PSI | 1 | |
| BA2604D / NTG2604-D | TYRE PRESSURE GAUGE | 1 | |
| BAC-945 | KIT - PITOT-STATIC PRESSURE TEST (CL-300, CL-604 VARIANT, BD700) | 1 | |
| BACC14AD-04 | ASSEMBLY - CAP, PRESSURE SEAL, FLARELESS TUBE (STANDARD | 1 | |
| BACC14AD06 | CAP ASSEMBLY - PRESSURE SEAL, FLARELESS TUBE | 2 | |
| BACC14AD08J | CAP PRESSURE SEAL | 1 | |
| BACC8844 | PRESSURE GAUGE | 1 | |
| BACP20AU10J | PLUG - HYDRAULIC PRESSURE TUBE, 5/8 INCH LINE, CORROSION RESISTANT STEEL | 1 | |
| BARFIELD 2311FA | TESTER: PRESSURE, 101-00212 | 1 | |
| BAT-SQZ-19 | PRESSURE RIVETING HEAD | 2 | |
| BB16910 | PRESSURE TUBE | 1 | |
| BB16913 | PRESSURE HOSE | 1 | |
| BB17011 | PRESSURE BRAKE BLEEDER ADAPTOR | 1 | |
| BB71160 | QUICKFLOW PRESSURE BRAKE BLEED | 1 | |
| BB71160KITA | BRAKE PRESSURE BLEEDER KIT | 1 | |
| BB71165 | QICKFLW PRESS BRKE BLEEDR KIT | 1 | |
| BB71165-FMV | QICKFLW PRESS BRKE BLEEDR KIT | 1 | |
| BCREFA0511 | SWITCH ASSY-LIGHTED PUSH BUTTON IND ON/PRESS | 1 | |
| BCT22-070B-A-G1/4-S12 | TRANSDUTOR DE PRESSAO | 1 | |
| BD205/50 | COMPRESSOR | 1 | |
| BDT83 | 909183 PRESSURE PADS | 1 | |
| BE-386-2 | TYRE Pressure Gauge | 1 | |
| BE-386-25 | TYRE PRESSURE GAUGE | 1 | |
| BE-386-2S | TYRE PRESSURE GAUGE | 1 | |
| BE386-2 | TYRE PRESSURE GAUGE | 1 | |
| BEAMEX PGHH | PGPH PRESSURE PUMP | 1 | |
| BF1410 | AIR PRESSURE REGULATOR | 2 | |
| BGF 202H | PRESSURE GAGE | 1 | |
| BHL-198 | HIGH PRESSURE SERVICE TOOL - N2 | 1 | |
| BINKS-183S-500 | BINKS PRESSURE TANK | 1 | |
| BJ03 RTF 0020 0007 | Pressure Pad | 1 | |
| BJ03 RTF 0020 0008 | Pressure Pad | 1 | |
| BJP1 | BALL JOINT PRESS MASTER SET | 1 | |
| BJP1-2A | PRESSURE SCREW FOR BJP1 | 1 | |
| BJP1-3A | BJ PRESS PAD | 1 | |
| BJP1-4A | UJ PRESS PAD | 1 | |
| BKS2465-14HV-32S0 | PAINT GUN, BINKS TROPHY, PRESSURE FEED | 1 | |
| BL48564 | SUPPORT PRESS PIN | 1 | |
| BL48565 | PUNCH PRESS PIN | 1 | |
| BMS5-91 | ADHESIVE - PRESSURE SENSITIVE FILM | 1 | |
| BMS5-95 | SEALANT - PRESSURE AND ENVIRONMENTAL - CHROMATE TYPE | 1 | |
| BNI-6150 | OXYGEN PRESSURE REGULATOR | 2 | |
| BP2712 | BATTERY FLUKE PRESSURE CALIBRATION | 1 | |
| BQC4D4AN | FITTING: PRESSURE,CONNECT,QUICK,BR, | 6 | |
| BRA0239 | HI-PRESSURE VALVE | 1 | |
| BRA0240 | LOW-PRESSURE VALVE | 1 | |
| BRA06-PS125 | PRESSURE SWITCH | 1 | |
| BRA06PS175 | PRESSURE SWITCH | 1 | |
| BRA10312H | 10HP 3PHASE COMPRESSOR | 2 | |
| BRA10312H460 | AIR COMPRESSOR 460 V 3 PH | 1 | |
| BRA15312H | 15HP 3PHASE COMPRESSOR | 1 | |
| BRA15312H440 | 460V 3PH AIR COMPRESSOR | 1 | |
| BRA16PG18 | PRESSURE GAUGE | 1 | |
| BRA20312H | AIR COMPRESSOR-HORIZONTAL 120-GALLON 20 HP (SNAP-ON) | 1 | |
| BRA20312H440 | COMPRESSOR-440 VOLTS | 1 | |
| BRA40SA | COMPRESSOR | 1 | |
| BRA5140H | 5HP 40GAL PORT. COMPRESSOR | 1 | |
| BRA5DV30VP | 5HP 30 GAL PORTABLE COMPRESSOR | 1 | |
| BRA5DV30VP50 | COMPRESSOR | 1 | |
| BRA60082501 | COMPRESSOR SEAL KIT | 1 | |
| BRA6PS175SQD | PRESSURE SWITCH SQUARE D | 1 | |
| BRA7180VEM | 7HP ECONOMY AIR COMPRESSOR | 1 | |
| BRA9G3B | 9HP 30 GAL AIR COMPRESSOR | 1 | |
| BRAACSO7380V | AIR COMPRESSOR 3 PHASE 230V | 1 | |
| BRAC560VCART | AIR COMPRESSOR WITH CART | 1 | |
| BRAP7SOS | 7HP PORTABLE COMPRESSOR HEAD | 1 | |
| BRAPEARLAND | COMPRESSOR PACKAGE | 1 | |
| BRN060030IND | COMPRESSION HEAD 06-0030 | 1 | |
| BRN7600 | STRUT SPRING COMPRESSOR | 1 | |
| BT350A | BRAKE PRESS | 1 | |
| BTCP1 | BRAKE CALIPER PRESS | 1 | |
| BTCP2SA | BRAKE CALIPER PRESS | 1 | |
| BTCP400 | SMALL BRAKE CALIPER PRESS | 1 | |
| BTCP600 | BRAKE CALIPER PRESS | 1 | |
| BU-2581-AM | PRESSURE GAUGE | 1 | |
| BU-2581-AQ | Pressure Guage | 3 | |
| BU-2581-AQ | PRESSURE GAUGE, AIR, 4000PSI, NO OIL | 3 | |
| BU-2581-HF | PRESSURE GAUGE | 1 | |
| BU-2851-AD | PRESSURE GAUGE 0-4000PSI | 1 | |
| BU2581-AQ | PRESSURE GAUGE 0-4000PSI | 3 | |
| BYLFLU718100 | PRESSURE CALIBRATOR 718 - 100G | 1 | |
| C-4696-1 | PRESSINGI TOO | 1 | |
| C-4696-2 | PRESSINGI TOOL | 1 | |
| C.32002-1 | COMPRESSOR | 12 | |
| C00010025 | PRESSURE GAUGE FOR TYRES, ANALOG, RANGE MIN 10BAR | 1 | |
| C0240-035-0810-ZINCPLATED | RESSORT COMPRESSION 0.240 OD X 0.035 WIRE X 0.810 LG ZINC PLATED | 1 | |
| C0300-022-0380-M | SPRING COMPRESSION | 1 | |
| C03000220380M | SPRING COMPRESSION | 1 | |
| C0455-039-1750 | COMPRESSION SPRING | 1 | |
| C0M10946 | ADAPTER PRESSURE 5/8- INCH FLARELESS FITTING AT ONE END 5/8- INCH 37- DEGREE FLARED FITTING AT THE OTHER END | 1 | |
| C10390-1 | ROLLER BEARING SWAGGING TOOL DRILL PRESS | 1 | |
| C1063 | TYRE PRESS GAUGE | 1 | |
| C107-06-0114 | PRESSURE TEST FIXTURE, | 1 | |
| C107-06-0478 | PRESSURE TEST FIXTURE | 1 | |
| C107-07-0580 | PRESSURE CHAMBER | 1 | |
| C12955 | PLUG CANISTER PRESS. SWITCH CONNECT | 1 | |
| C12987 | FIXTURE,PRESS. TEST-FLAP | 1 | |
| C17048KA01 | PRESSURE GENERATOR | 1 | |
| C17849-101 | PRESSURE RELIEF COVER | 4 | |
| C185WKUB-T4I | AIR COMPRESSOR | 1 | |
| C20002-205 | Pressure gauge | 1 | |
| C202-32-0711 | SEAL PRESS FIXTURE | 1 | |
| C21002-4 | PRESSURE GAUGE | 6 | |
| C21007-35 | Pressure Gauge | 1 | |
| C21007-39 | Pressure Tube | 1 | |
| C21007-9 | Pressure Tube Assy | 1 | |
| C24937001-1 | SWITCH, PRESSURE | 3 | |
| C26004-32 | ENGINE FIRE TUBING PRESSURE TESTER | 12 | |
| C26004-33 | ENGINE FIRE TUBING PRESSURE TESTER | 14 | |
| C26004-69 | Pressure gauge | 1 | |
| C26004-73 | ENGINE FIRE TUBING PRESSURE TESTER | 5 | |
| C26004-74 | ENGINE FIRE TUBING PRESSURE TESTER | 4 | |
| C26004-78 | ENGINE FIRE TUBING PRESSURE TESTER | 2 | |
| C26004-79 | ENGINE FIRE TUBING PRESSURE TESTER | 1 | |
| C26004-83 | ENGINE FIRE TUBING PRESSURE TESTER | 10 | |
| C26004-84 | ENGINE FIRE TUBING PRESSURE TESTER | 9 | |
| C26011-1 | ALIGNMENT EQUIPMENT - FIRE SUPPRESSION BOTTLE NOZZLE | 9 | |
| C26ZZZ | ALIGNMENT TOOL - FIRE SUPPRESSION BOTTLE NOZZLE | 1 | |
| C27030-79 | Spring Compression | 1 | |
| C27036-6 | L/E CRUISE DE-PRESS VALVE PIN | 1 | |
| C27038 | LOCKPIN L.E. CRUISE DPRESSURIZATION VALVE | 1 | |
| C27038-1 | L.E. CRUISE DEPRESS PIN | 7 | |
| C27038-6 | Lockout Pin - Leading Edge Cruise Depressurization Valve | 22 | |
| C27038-6 | LOCKPIN CRUISE DEPRESSURIZATION VALVE | 22 | |
| C27038-7 | LOCK PIN- LE DIPRESSURIZATION | 6 | |
| C27038‐6 | PIN ‐ LOCKOUT L.E. CRUISE DEPRESSURIZATION VALVE (SPL-1746) | 22 | |
| C27050-125 | EQUIPMENT - HANDLING, STABILIZER JACKSCREW (FLAT PRESSURE BULKHEAD) | 8 | |
| C27050-32 | Equipment-Handling, StabilizerJackscrew ( Dome Pressure Bulkhead) | 8 | |
| C27050-82 | EQUIPMENT- HANDLING, STABILIZER JACKSCREW (FLAT PRESSURE BULKHEAD) | 16 | |
| C27065-12 | PRESSURE GAUGE | 1 | |
| C28005-29 | Check Fixture Equ Pressure Relief Valve | 1 | |
| C28008-2 | PRESSURE TEST EQUPT. | 1 | |
| C28014-1 | PRESSURE CHECK EQUIPMENT FUEL SUPPL | 13 | |
| C28014-3 | PRESSURE HOSE ASSY | 1 | |
| C28014-4 | PRESSURE GAUGE | 1 | |
| C29001-1 | Cap - Sealing, Pressure Transmitter Mount | 2 | |
| C29006-28 | Connector assy-pressure side | 3 | |
| C29006-4 | Connector Assy - Pressure Side | 1 | |
| C29008-1 | Seal Compression Equipment - Hydraulic Swivel Assembly | 8 | |
| C3-4C49-C013 | COMPRESSOR WASH TRONAIR | 1 | |
| C32000-1 | RING COMPRESSOR NLG INNER CYLINDER | 1 | |
| C32002-1 | RING COMPRESSOR | 12 | |
| C32002-1/2 | RING COMPRESSOR - NLG INNER CYLINDER | 1 | |
| C32002-18 | RING COMPRESSION | 1 | |
| C32002-2 | RING COMPRESSOR HALF | 1 | |
| C32002-3 | RING COMPRESSOR HALF | 1 | |
| C320021-2 | RING COMPRESSOR | 1 | |
| C32016-10 | COMPRESSOR HALF | 4 | |
| C32016-19 | COMPRESSOR HALF | 1 | |
| C32017-26 | COMPRESSION SLEEVE | 1 | |
| C32018-10 | PRESS COLLAR HALF (2EA) | 2 | |
| C32022-1 | RING COMPRESSOR NLG INNE CYLINDER | 5 | |
| C32032-125 | PUMP PRESSURE GAUGE | 8 | |
| C32032-89 | Pressure gauge | 1 | |
| C32032-98 | PUMP PRESSURE GAUGE | 10 | |
| C32034-264 | Hyd press gauge | 1 | |
| C32051 | GAUGE EQUIPMENT - HYDRAULIC BRAKE SYSTEM PRESSURE | 1 | |
| C32051-1 | Test Equipment - Hydraulic Brake System Pressure Checking | 7 | |
| C32051-1+A6095 | Test Eqpt - Hydraulic Brake Sys Pressure Checking | 1 | |
| C32069-1 | LEVER COMPRESSION EXTENSION EQUIPMENT - MAIN LANDING GEAR | 1 | |
| C35001 | PRESSURE LEAK TEST EQPT-CREW OXYGEN SYSTEM | 1 | |
| C35001-1 | Pressure Leak Test Equipment - Crew Oxygen System | 6 | |
| C35001-27 | PRESSURE LEAK TEST EQUIPMENT - CREW OXYGEN SYSTEM | 4 | |
| C35001-37 | PRESSURE LEAK TEST EQUIPMENT - CREW OXYGEN SYSTEM | 8 | |
| C35001-38 | PRESSURE LEAK TEST EQUIPMENT - CREW OXYGEN SYSTEM | 5 | |
| C35001-6 | Pressure Leak Test Equipment - Crew Oxygen System | 9 | |
| C35002-1 | Pressure Leak Test Equipment - Passenger Oxygen System | 3 | |
| C35002-14 | Pressure Leak Test Equipment - Passenger Oxygen System | 4 | |
| C36001-109 | High Pressure Relief Valve | 1 | |
| C36001-2 | PRESSURE GAUGE 0-30 PSI | 7 | |
| C36001-3 | PRESSURE GAUGE 0-60 PSI | 3 | |
| C36001-64 | PARKER COMPRESSED AIR REGULATOR | 18 | |
| C37-099-103 | ADAPTER FOR PRESSURE TEST VALVE | 4 | |
| C37099-103 | TOOL ADOPTER, PRESS TEST VALVE | 4 | |
| C47001-1 | Test Equipment - Nitrogen-Enriched Air Distribution Negative Pressure Leak Check | 5 | |
| C47001-72 | TEST EQUIPMENT - NITROGEN ENRICHED AIR DISTRIBUTION SYSTEM (NEADS) NEGATIVE PRESSURE LEAK CHECK | 8 | |
| C47002-35 | DIGITAL PRESSURE GAUGE 0-50PSI | 1 | |
| C47356 | PRESSING-IN TOOL | 1 | |
| C47767 | COMPRESSION FIXTURE | 1 | |
| C47787 | PRESSING IN TOOL | 1 | |
| C47884 | COMPRESSING FIXTURE | 1 | |
| C47888 | COMPRESSING FIXTURE | 1 | |
| C47889 | COMPRESSION TOOL | 1 | |
| C47891 | COMPRESSION TOOL | 1 | |
| C47969 | COMPRESSION FIXTURE | 1 | |
| C47972 | COMPRESSION | 1 | |
| C47978 | Compression Fixture | 1 | |
| C47988 | COMPRESSION FIXTURE | 1 | |
| C49001-29 | CAP PRESSURE | 1 | |
| C49001-30 | CAP PRESSURE | 1 | |
| C49001-31 | CAP PRESSURE | 1 | |
| C51003-28 | SKIN MEASURE PRESS GAUGE | 6 | |
| C52001-1 | Holding Fixture - Compressed Spring Cartridge | 4 | |
| C52004 | HOLDING FIXTURE - COMPRESSED SPRING CARTRIDGE | 1 | |
| C52004-1 | HOLDING FIXTURE - COMPRESSED SPRING CARTRIDGE | 11 | |
| C52005-1 | O/WING DOOR SPRING COMPRESSOR | 4 | |
| C541-1657-C1 | TANK ASSEMBLY 10 GALLON PRESSURIZED | 1 | |
| C57003-1 | TESTER PRESSURE | 5 | |
| C57003-3 | PRESSURE TEST DOOR ASSY | 1 | |
| C57003-41 | DOOR ASSEMBLY - PRESSURE TEST, BOEING WINGLETS (NOT APB WINGLETS) | 1 | |
| C57003-51 | PRESSURE TEST DOOR ASSEMBLY - AIRPLANES WITH PRODUCTION WINGLETS, | 1 | |
| C57003-7 | PRESSPLATE | 1 | |
| C6U1140–33 | BLOCK – COMPRESSION | 1 | |
| C71020-22 | AFT BOOTSTRAP PRESS PIN | 1 | |
| C71044-28 | PRESSURE RELIEF DOOR LATCH LOAD TEST ADAPTER EQUIPMENT | 1 | |
| C72928-33 | PRESSURE REGULATOR | 1 | |
| C72928-34 | PRESSURE REGULATOR | 1 | |
| C72928-52 | PRESSURE REGULATOR | 1 | |
| C72928-53 | PRESSURE REGULATOR | 1 | |
| C72928-58 | PRESSURE REGULATOR | 1 | |
| C75001-1 | SWITCH LOCK DEPRESS | 9 | |
| C75001-3 | SWITCH LOCK DEPRESS | 1 | |
| C78026-238 | Pressure gauge | 2 | |
| C78040-1 | DRIVE SOCKET - TRAS, MANUAL DRIVE (FULLY DEPRESSED) | 7 | |
| C78040-10 | DRIVE SOCKET - TRAS, MANUAL DRIVE (FULLY DEPRESSED) | 6 | |
| C78040-11 | DRIVE SOCKET - PARTIAL DEPRESS | 2 | |
| C79001 | TEST EQPT-ENGINE,FUEL/OIL,PRESSURE SWITCH | 1 | |
| C79001-1 | Test Eqpt - Engine Fuel and Oil Pressure Switch | 14 | |
| C79001-2 | PRESSURE TEST | 1 | |
| C79001-2-F | PRESSURE TEST | 1 | |
| C809-325H | 809 SERIES 25' X 3/8" HIGH PRESSURE | 1 | |
| C809-325L | 809 SERIES 25' X 3/8" LOW PRESSURE | 1 | |
| C809-325M | 809 SERIES 25' X 3/8" MEDIUM PRESSURE | 1 | |
| C820-350H | 820 SERIES 15M X 3/8" HIGH PRESSURE | 1 | |
| C880-650L | 880 SERIES 15M X 1" LOW PRESSURE | 1 | |
| C9241-1 | ADAPTOR PRESSURE TEST | 1 | |
| C9393G01 | ADAPTER SET PRESSURE TEST/RIG - VIGV, VBV, VSV SPECIAL TOOL FOR PRESSURE TEST | 1 | |
| C9555 | COMARK C9555 DIFFERENTIAL MANOMETER WITH 2 PRESSURE PORT/S, MAX PRESSURE MEASUREMENT 2.1BAR | 1 | |
| CA85400-0003 | SHOCK STRUT PRESSURE TESTER | 1 | |
| CA85400-0005 | SHOCK ABSORBER PRESSURE TESTER, | 2 | |
| CA85500-0005 | SHOCK ABSORBER PRESSURE TESTER, | 2 | |
| CA85500-005 | GAUGE PRESSURE | 1 | |
| CA85500-0058 | GAUGE PRESSURE | 1 | |
| CAABGB300200ZZZ066ZD | COMPRESSOR KIT, ICE PROTECTION AND AIR CONDITIONING SYSTEM | 1 | |
| CAM1500AXIND | 1450 PSI PRESSURE WASHER | 1 | |
| CAMARAL200 | PRESSURE WASHER WAND ASSY | 1 | |
| CARGO DOOR PRESSURE TESTER | CARGO DOOR PRESSURE TESTER | 1 | |
| CAT5033-8B | PRESS PAD | 1 | |
| CAT5616-18E | PRESSING SLEEVE | 1 | |
| CD60 | LOW PRESSURE REGULATOR | 1 | |
| CD70100 | TESTER: DECAY,PRESSURE, | 3 | |
| CD70200 | PRESSURE ATTENUATION TEST KIT | 1 | |
| CDP502F | FLOOR STANDING INDUSTRIAL DRILL PRESS | 1 | |
| CDV60C | 6" DRILL PRESS VICE | 1 | |
| CET2F | ARBOR PRESS | 1 | |
| CET3F | ARBOR PRESS | 1 | |
| CET4F | ARBOR PRESS | 1 | |
| CET6F | ARBOR PRESS | 1 | |
| CF34-8C/E ENGINE PROBE | Compressor Wash Rig Bracket | 1 | |
| CF65B40907 | CHECK FIXTURE - PRESSURE RELIEF VALVE ASSEMBLY, AIR CONDITIONING | 1 | |
| CFM56-BOOST-PUMP-TESTER | BOOST PUMP PRESSURE TESTER - CFM56 | 1 | |
| CG100 | PRESS, ARBOR, HAND | 2 | |
| CG170HY | PRESS, BENCH, HYDRAU | 2 | |
| CG250-8 | PULLER PRESSURE | 1 | |
| CG40-1 | PRESSURE SCREW 5/8-18 X 7-3/4 | 1 | |
| CG420-5C | PRESSURE GAUGE, FOR | 1 | |
| CG473HY | HYDRAULIC PRESS | 1 | |
| CG570BHY | FLOOR PRESS | 1 | |
| CG9000022-0001 | HIGH PRESSURE DUCT REPLACEMENT PYLON | 1 | |
| CG9000047-0001 | Fuel Lines Pressure and Obstruction Kit (Not Supplier provided) | 1 | |
| CG9000064-0047 | TOOL FUEL LINES PRESSURE OBSTRUCTION | 1 | |
| CG9262401-0001 | ADAPTER CARGO POSITIVE PRESSURIZATION | 1 | |
| CG9281001-0001 | WING PRESSURIZATION KIT | 1 | |
| CG9281001-0019 | TOOL KIT WING PRESSURIZATION | 1 | |
| CGA580 | CGA580 HIGH-PRESSURE NIPPLES FOR COMPRESSED INERT GAS TO MALE NPT 1/4 | 3 | |
| CGG8850-PVS | PRESSURE VALVE SET WITH GAUGE | 1 | |
| CGG8850PVS | PRESSURE VALVE SET WITH GAUGE | 1 | |
| CGH250-8A | PULLER PRESSURE | 1 | |
| CGS15047-1 | PRESSURE RELIEF VALVE TESTER | 1 | |
| CH-ENG127 | CABIN PRESSURISATION TEST SET | 1 | |
| CH1057-078-1 | PRESS TOOLS | 1 | |
| CH1057-136 | PRESS TOOL | 1 | |
| CH1540-0277 | COMPRESSION TOOL | 3 | |
| CH1543-0042 | PRESSURE BLANKING PLUG FOR CONDUCTING TEST ON GUIDE TUBE ASSY (P/N CH1543A0011) | 1 | |
| CH1878-0579 | PRESS TOOL AND BUSH | 1 | |
| CH2718GE1000 | COMPRESSIVE NO- BACK TOOL | 1 | |
| CH705-651 | SPRING COMPRESSOR | 1 | |
| CH705-779 | SPRING COMPRESSOR | 1 | |
| CH740-129 | PRESS BOTTOM RING | 1 | |
| CHA1057-136 | PRESS TOOL | 1 | |
| CHA1057-411 | PRESSURE TEST ADAPTORS | 1 | |
| CHA1542-0022 | Spring Compression Tool | 1 | |
| CHA1878-0500 | Spring Compressor | 1 | |
| CHA1878-0500PM | SPRING COMPRESSOR | 1 | |
| CHA1878-0578 | Press Assembly | 1 | |
| CHA1878-0578PM | PRESS ASSEMBLY | 1 | |
| CHA1878-0584 | Spring Compression Tool | 1 | |
| CHA1878-0584PM | SPRING COMPRESSION TOOL | 1 | |
| CHA1917-0078 | SPRING COMPRESSION TOOL (GOODRICH ACTUATION SYSTEMS ) | 1 | |
| CHA705-779 | SPRING COMPRESSOR | 1 | |
| CHA740-128 | PRESS TOP RING | 1 | |
| CHA740-129 | PRESS BOTTOM RING | 1 | |
| CHA758-082 | EXTENSION-COMPRESSION SPRING BALANCE | 1 | |
| CHENG12783A | PRESSURISATION TEST | 1 | |
| CHX36-04 | PRESSURE SCREW | 1 | |
| CISZ539956 | PRESSURE GAUGE | 1 | |
| CJ105-3 | PRESSURE SCREW 3/4-16 X 10 1/2 | 1 | |
| CJ83-2 | PRESSURE SCREW 3/4-16X6 11/16 | 1 | |
| CJ83-3 | PRESSURE SCREW 3/4-16 X 5 1/8 | 1 | |
| CJ83-9 | PRESSURE SCREW | 1 | |
| CJDM21-001 | ADAPTOR PRESSURIZATION TEST KIT | 1 | |
| CJDMX21-001 | ADAPTOR PRESSURIZATION TEST KIT | 1 | |
| CJMD321-004 | CABIN PRESSURIZATION TEST CART | 2 | |
| CJMD821-001 | CABIN PRESSURIZATION BREAKOUT BOX | 2 | |
| CJMD8B71-001 | CAP, HIGH PRESSURE BLEED AIR | 2 | |
| CJMDS36-002 | HIGH-PRESSURE BLEED AIR SHUTOFF VALVE TEST TUBE | 1 | |
| CJMDX21-001 | TOOL TUBE KIT PRESSURE | 5 | |
| CJPB | SCREW PRESSURE 5/8-18X4.36 | 1 | |
| CL2107 | HIGH PRESSURE GAUGE | 1 | |
| CLASSE 1 | PRESSURE GAGE 0-30 PSI | 1 | |
| CM-105C | HIROSE CRIMP PRESS | 1 | |
| CM-125 | PRESSURE GAGE(ABS) | 1 | |
| CM-30 | PRESSURE GAGE(ABS) | 1 | |
| CM1-B | High Speed Pressure Control Module | 1 | |
| CMEC6150 | AIR COMPRESSOR KIT WITH 13 PC ACCESSORY KIT (6 GAL) | 1 | |
| CMXECXM331 | 175 PSI OIL-FREE PORTABLE VERTICAL AIR COMPRESSOR (33 GAL) | 1 | |
| CM_*5000PSI | PRESSURE GAGE 5000 PSI ACCY: ±0.1%FS | 1 | |
| CNV-40-10 | LP COMPRESSOR | 1 | |
| CO148-023-0250M | COMPRESSION SPRING ¿4mmODX6mmLG MADE FROM 1" | 1 | |
| CODE 690411 | BLEED AIR SYSTEM PRESSURE AND LEAK CHECK TEST FIXTURE TOOL | 1 | |
| CODE690411 | BLEED AIR SYSTEM PRESSURE AND LEAK CHECK TEST FIXTURE TOOL | 1 | |
| COM-13319 | EPR PRESSURE HOSE | 1 | |
| COM-14469 | PRESSURE MONITOR TOOL | 1 | |
| COM00150-1 | PARACHUTE PACKING PRESS, 220V | 1 | |
| COMET KD300 M | HOT WATER PRESSURE WASHER | 1 | |
| COMMERCIAL | ARBOR PRESS FIXTURE | 1 | |
| COMMON | CENTRALIZED COMPRESSOR | 1 | |
| COMP-WASH | PRESSURE GUAZE | 1 | |
| COMPRESSOR | 30 Gallon Compressor 1.9 HP | 1 | |
| COMPRESSOR ENGINE WASH CART | COMPRESSOR ENGINE WASH CART | 1 | |
| COUPLANT B2-GLYCERIN | PRESSURE GAUGE | 1 | |
| CP-0351 | ALLIGATOR JAW COMPRESSION RIVETER TOOL | 2 | |
| CP-0450-CEJAF | COMPRESSION RIVETER | 1 | |
| CP-0450-CEMAF | COMPRESSION RIVETER | 1 | |
| CP-150 | COMPRESSION RIVETER | 1 | |
| CP0351 ESREL | CP0351 ESREL ALLIGATOR JAW COMPRESSION RIVET SQUEEZER - 7" | 3 | |
| CP0351ESREL | CP0351 ESREL ALLIGATOR JAW COMPRESSION RIVET SQUEEZER - 7" | 3 | |
| CP26331 | IP COMPRESSOR MODULE SUPPORT RB211 -22 534 | 1 | |
| CP30123 | TRANSPORTATION STAND IP COMPRESSOR MODULE 02 | 1 | |
| CP30123/6 | IP COMPRESSOR MODULE (02) TRANSPORTATI | 1 | |
| CP30333-4 | IP COMPRESSOR MODULE TRANSPORTATION ADAPTOR RB211 -22 534 | 1 | |
| CP30333/4 | IP COMPRESSOR MODULE TRANSPORTATION ADAPTOR RB211 -22 534 | 1 | |
| CP30367 | ADAPTOR-IP COMPRESSOR LIFTING FRAME OR PARKING TROLLEY | 1 | |
| CP30421-1 | ROTOR SUPPORT - IP COMPRESSOR MODULE TRANSPORTATION STAND | 1 | |
| CP30421/1 | ROTOR SUPPORT - IP COMPRESSOR MODULE TRANSPORTATION STAND | 1 | |
| CP30432-3 | TURNOVER STAND HP SYSTEM (04) & IP COMPRESSOR (02) COMPLETE MODULES | 1 | |
| CP30432/3 | TURNOVER STAND HP SYSTEM (04) & IP COMPRESSOR (02) COMPLETE MODULES | 1 | |
| CP30728-4 | TRANSPORTATION STAND FOR HP COMPRESSOR MODULE - V2500 | 1 | |
| CP30728/4 | TRANSPORTATION STAND FOR HP COMPRESSOR MODULE - V2500 | 1 | |
| CP7721 | CABIN PRESSURE | 1 | |
| CPAL30B | PRESSURE CONTROLLER 0/40 BAR | 1 | |
| CPAM-532 | ALTITUDE PRESSURE-SWITCH-TEST CONNEC-TOR | 6 | |
| CPAM532 | TEST CONNECTOR ALTITUDE PRESSURE SWITCH | 6 | |
| CPG500 | PRESSURE GAGE DIGITAL | 1 | |
| CPH6210 | WIKA PRESSURE INDICATOR MODEL | 1 | |
| CPR3165000 | COMPRESSION WRENCH | 1 | |
| CPSCH3882 | MVP COVER - IP COMPRESSOR MODULE | 1 | |
| CPT6120 | WIKA PRESSURE SENSOR MODEL | 1 | |
| CPT900-13 | TROLLEY, PRESSURIZA-TION TEST | 1 | |
| CPWA-30233 | Support, compressor rotor, assembly | 1 | |
| CPWA-30405 | Pressure Test Fixture | 1 | |
| CPWA-30447 | Drift – Compressor Turbine Disc | 1 | |
| CPWA-30448 | Protector – Compressor Inlet | 1 | |
| CPWA-30452 | Fixture – Aligning, Compressor Rotor Assembly | 1 | |
| CPWA-30455 | Stand – Support, Compressor Rotor Assy | 1 | |
| CPWA-30487 | Puller – Compressor Disks | 1 | |
| CPWA-30493 | Puller – Compressor Turbine Stator Air Seal | 1 | |
| CPWA-30495 | Gauge – Compressor Tie Bolt Stretch | 1 | |
| CPWA30331 | P&W COMPRESSOR TURBINE DISC WRENCH | 4 | |
| CPWA30405 | PRESSURE TEST FIXTURE | 1 | |
| CPWA30415 | COMPRESSER TOOL | 1 | |
| CRACK-PX-GAUGES | CRACK PRESSURE GAUGES TOOL | 1 | |
| CREW-02-REG-PX-CHK | CREW OXY REG PRESS CHK TOOL | 1 | |
| CS-295-AG131 | Compressor Kit, Ice Protection System | 1 | |
| CS-295-AG131-11-02 | PRESSURE GAUGE 0-60 PSI | 1 | |
| CS-295-AG131-24-11 | PRESSURE GAUGE 40 BAR | 1 | |
| CS-295-AG131-24-34 | PRESSURE GAUGE 500 PSI | 1 | |
| CS-295-AG131-24-56 | PRESSURE GAUGE 150 PSI | 1 | |
| CS-295-AG131-D | COMPRESSOR KIT,ICE PROTECTION & AIR CONDITIONING S | 1 | |
| CS-295-AG131-F | COMPRESSOR KIT, ICE PROTECTION AND AIR CONDITIONIN | 1 | |
| CS-295-AG131-X | Compressor Kit, Ice Protection and Air Conditioning System | 1 | |
| CS-295-AG131-X?? | COMPRESSOR KIT, ICE PROTECTION AND AIR CONDITIONIN | 1 | |
| CS-295-AG131-X | COMPRESSOR KIT, ICE PROTECTION AND AIR CONDITIONIN | 1 | |
| CS-295-RC114 | COMPRESSOR KIT, ICE PROTECTION AND AIR CONDITIONING SYSTEM - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| CS-710-119 | INSTALLATION / REMOVAL TOOL PRESS. RELIEF VALVE | 2 | |
| CS-710-531 | PRESSURE HAND PUMP | 2 | |
| CS-H21-AG106 | CART,COMPRESSOR CLEANING | 1 | |
| CS710-119 | TOOL, PRESS. RELIEF VALVE | 2 | |
| CS710-531 | PRESSURE HAND PUMP | 2 | |
| CSC 1011A | PRESSURE GAUGE 0-400 PSI (MALABAR CSC 1011A) | 1 | |
| CSERIES-945 | PRESSURE TEST ADAPTER (PITOT STATIC ADAPTOR KIT) | 3 | |
| CSHA150K0E00 | COMPRESSOR 15 TON | 1 | |
| CSPB10-100K30P5 | CSP COMPRESSION CANISTER, STAINLESS STEEL (PART OF THE AIRCRAFT WEIGHTING EQUIPMENT ) | 1 | |
| CST-2834 | BETA SYSTEM DECOMPRESSION TOOL (HARTZELL PROPELLER INC.) | 1 | |
| CST-2987 | BETA SYSTEM DESCOMPRESSION TOOL | 3 | |
| CST-2987 OR CST-2834 | BETA SYSTEM DECOMPRESSION TOOL (HARTZELL PROPELLER INC.) | 1 | |
| CST-2987CST-2834 | BETA SYSTEM DECOMPRESSION TOOL (HARTZELL PROPELLER INC.) | 1 | |
| CST2987 | BETA SYSTEM DECOMPRESSION TOOL - HARTZELL | 3 | |
| CT1 | Bob Baines CT1 18mm Thread Compression Tester Extension | 3 | |
| CT1-697742100 | COMPRESSION TOOL | 1 | |
| CT12 | Bob Baines CT12 12mm Thread Compression Tester Extension | 2 | |
| CT14 | Bob Baines CT14 14mm Thread Compression Tester Extension | 2 | |
| CT18 | Bob Baines CT18 18mm Thread Compression Tester Extension | 1 | |
| CT250004 | Gauge - Pressure Tester | 1 | |
| CTGR8845-29 | PRESSURE SPRING | 1 | |
| CTGRS8825-15 | PRESSURE SPRING | 1 | |
| CTR200−580 | CART − NITROGEN HIGH AND LOW PRESSURE HANGAR USE (2 BOTTLES) | 1 | |
| CTR200−580 orequivalent | Cart − Nitrogen High and Low Pressure Hangar Use (2 bottles) | 1 | |
| CTRS4850-10 | COMPRESSION SPRING. | 1 | |
| CU-2581-JT | PRESSURE GAUGE (PSI 400) | 1 | |
| CU-2581-KB | 0-1000 PSI, CLASS 1.6 (REPLACEMENT FOR A PRESSURE GAUGE FROM U.S. GAUGE; CU-2581-KB) | 1 | |
| CUTA2810114C | PRESSURE RELIEF VALVE | 2 | |
| CV-9812-DC | AIR COMPRESSOR | 1 | |
| CV-9813-B | AIR COMPRESSOR | 1 | |
| CV-9813·B | COMPRESSED AIR | 1 | |
| CX-PG-CSYB | DIGITAL ENGINE PRESSURE FUEL MANOMETER | 1 | |
| CZ 9284E | PRESSURE TRANSDUCER | 12 | |
| CZ9284E | PRESSURE TRANSDUCE | 12 | |
| CZ9284E-F | PRESSURE INLET FITTING | 1 | |
| CZ9DM6A | TRANSDUCER PRESSURE | 1 | |
| Commercial | Arbor Press Fixture | 1 | |
| D-07038 | PRESSURE GAUGE FOR INFLATION TOOL | 1 | |
| D056451-01 | PUNCH, COLLET, PRESS & INSPECT | 1 | |
| D1-1 100 | DIGITAL PRESSURE EQUIPMENT | 1 | |
| D10106-2-O2 | HIGH PRESSURE CYLINDER (FOR SC HYDRAULIC GAS BOOSTER)/ BARREL-GAS. | 1 | |
| D13170 | COMPRESSION SPRING | 1 | |
| D139-799-015 | SERIES 500 COMPRESSOR WASH SYSTEM WITH AUXILIARY AIR TANK | 3 | |
| D19750-1 | HIGH PRESSURE CAP | 1 | |
| D21851-1500 | LOW PRESSURE TEST RIG | 1 | |
| D21851-5000 | D21851-5000 OR U21905200 LOW-PRESSURE TEST FIXTURE | 1 | |
| D24269TL1 | ELECTRONIC PRESSURE SWITCH | 1 | |
| D24269TL2 | ELECTRONIC PRESSURE SWITCH | 1 | |
| D24270TL1 | ELECTRONIC PRESSURE SWITCH | 1 | |
| D24270TL2 | ELECTRONIC PRESSURE SWITCH | 1 | |
| D24271TL1 | ELECTRONIC PRESSURE SWITCH | 1 | |
| D24271TL2 | ELECTRONIC PRESSURE SWITCH | 1 | |
| D24273TL1 | ELECTRONIC PRESSURE SWITCH | 1 | |
| D24273TL2 | ELECTRONIC PRESSURE SWITCH | 1 | |
| D24298TL2 | COMPRESSION/DEPRESSION TOOL | 1 | |
| D24300TL2 | COMPRESSION/DEPRESSION TOOL | 1 | |
| D2557134600400 | FRAME ASSY-DECOMPRESSION | 1 | |
| D2591-98C | PRESSURE DROP TEST FITTING | 1 | |
| D2887-148B/E | COMPRESSION SPRING | 1 | |
| D38999/26FA98SA | ELECTRICAL CONNECTOR FOR PRESSURE TRANSDUCER | 1 | |
| D4-12-10-1-160N-56 | COMPRESSION GAS SPRING | 1 | |
| D42002 | ACTUAL VALIDATED PRESSURE TEST CERTIFICATE WITH DATA ACCORDING TO BS EN10204-3.1 | 1 | |
| D42012 | ACTUAL VALIDATED PRESSURE TEST CERTIFICATE WITH DATA ACCORDING TO DIN 55350-18-4.2.2 | 1 | |
| D44-7521-00-00-ST | PRESSURE TOOL ASSEMBLY | 1 | |
| D46036 | COMPRESSING FIXTURE | 1 | |
| D46105 | COMPRESSION FIXTURE | 1 | |
| D46108 | COMPRESSION TOOL | 1 | |
| D46110 | COMPRESSION FIXTURE | 4 | |
| D46301 | EXTRACTOR AND PRESSING IN TOOL | 3 | |
| D46475 | Compression Tool | 1 | |
| D46477 | ADAPTER FOR COMPRESSING SPRING | 1 | |
| D46575 | COMPRESSION FIXTURE | 2 | |
| D60340 | Test Kit − Pitot/Static Pressure (high precision) | 1 | |
| D60383 | TEST SET - AIR DATA; RVSM COMPLIANT; -3000 TO 80,000 FT. INCLUDES EPR; INTERNAL VACUUM AND PRESSURE SOURCES OPTIONS AVAILABLE | 1 | |
| D622M0340101D523-01 | PRESS IN CUFF BUSHINGS TOOL (SAP CODE 8334910) | 1 | |
| D622M0340101D531-01 | PRESS OUT CUFF BUSHINGS TOOL (SAP CODE 8334911) | 1 | |
| D7448-8 | PRESSURE GAGE | 1 | |
| D98C08-615 | FUEL PRESSURE SWITCH | 1 | |
| DAC20 | AIR CONDITIONING UNIT - TRAILER OR TRUCK MOUNTED - 165 LBS/MIN - 20 TON OUTPUT - SINGLE HOSE DELIVERY -40 TO 125 DEGREES F - NOMINAL STATIC PRESSURE 20" H2O @ END OF HOSE (4.98 KPA) - COOLING CAPACITY 232,700 BTU/HR (68.2 KW) | 1 | |
| DAC30 | AIR CONDITIONING UNIT - TRAILER OR TRUCK MOUNTED - 205 LBS/MIN - 30 TON OUTPUT - SINGLE HOSE DELIVERY -40 TO 125 DEGREES F - NOMINAL STATIC PRESSURE 22" H2O @ END OF HOSE (5.48 KPA) - COOLING CAPACITY OF 360,000 BTU/HR (105.5 KW) | 1 | |
| DAC321 | AIR CONDITIONING UNIT - TRAILER OR TRUCK MOUNTED - 210 LBS/MIN - 32 TON OUTPUT - SINGLE HOSE DELIVERY -40 TO 128 DEGREES F - NOMINAL STATIC PRESSURE 20" H2O @ END OF HOSE (4.98 KPA) - COOLING CAPACITY 232,700 BTU/HR (68.2 KW) | 1 | |
| DAC54A | Digital Pressure Gauge Kit 3-319 psi | 3 | |
| DAC5A ACCURA5 | PRESSURE INDICATOR | 1 | |
| DAC601 | DAC6 High Pressure DIGITAL Inflator 2 - 350 psi, 2m Hose 8V1 & 2m Hose 12V1 | 1 | |
| DAC6401 | DAC64 High Pressure DIGITAL Check Unit 2 - 350 psi, 0.5m Hose 8V1 & 12V1 Connectors | 1 | |
| DAH 602434 | Press Pad | 1 | |
| DAH600262 | PRESS PAD | 1 | |
| DAH601789 | TOOL,PRESSURE PAD STAKING | 1 | |
| DAH602194-1 | PAD-PRESS | 1 | |
| DAH602194-2 | PAD-PRESS | 1 | |
| DAH602194-3 | PAD-PRESS | 1 | |
| DAH602194-4 | PAD-PRESS | 1 | |
| DAH602194-5 | PAD-PRESS | 1 | |
| DAH602194-6 | PAD-PRESS | 1 | |
| DAH602234 | TOOL-PRESS | 1 | |
| DAH602293 | PAD-PRESS | 1 | |
| DAH602307 | PAD-PRESS | 1 | |
| DAH602309 | PAD-PRESS | 1 | |
| DAH602347 | PAD-PRESS | 1 | |
| DAH602434 | PRESS PAD | 1 | |
| DAH602435 | PAD-PRESS | 1 | |
| DAH603015 | RIG-TEST,PRESSURE | 1 | |
| DAH603066 | PAD-PRESS | 1 | |
| DAI-7500-01-00-ST | PRESSURE RELIEF VALVE BLOCKING TOOL | 1 | |
| DAI-7500-02-00-ST | PRESSURE TEST EQUIPMENT 4PCI | 1 | |
| DAI-7521-00 | PRESSURE TOOL | 1 | |
| DAI/3133/50 | TYPICAL MECHANICAL PRESSURE GREASE PACKER | 1 | |
| DAKE MODEL 0 | SINGLE LEVER ARBOR PRESSES | 1 | |
| DAKE00 MODEL | ABOR PRESS (3TON) M/D 1-¾ | 1 | |
| DAPT 60-0173-00 | SEAL COMPRESSION SLEEVE | 1 | |
| DAPT49-0127-00 | PRESSURE PADT | 1 | |
| DAPT60-0053-00 | PRESS PAD | 1 | |
| DAPT60-0090-00 | SEAL COMPRESS | 1 | |
| DAPT60-0188-00 | WRENCH/SPANNER BEARING (PRESSURE CHAMBER SEAL FAILURE) | 8 | |
| DAPT60-0188-00-IAS | WRENCH-BEARING, PRESSURE CHAMBER | 1 | |
| DAPT60-0188-00IAS | WRENCH/SPANNER BEARING (PRESSURE CHAMBER SEAL FAILURE) | 1 | |
| DAPT60-0196-00 | COMPRESSION RING | 1 | |
| DAPT60-0202-00 | compression ring | 1 | |
| DAPT60-0381-00 | COMPRESSION RING | 1 | |
| DAPT60-0384-00 | COMPRESSION RING | 1 | |
| DAPT60-0386 | COMPRESSION RING | 1 | |
| DAPT60-0386 -00 | COMPRESSION RING | 5 | |
| DAPT60-0386-00 | SEAL COMPRESSOR | 5 | |
| DAPT60-0386-00-IAS | SEAL COMPRESSION RING | 1 | |
| DAPT60-0400-00 | COMPRESSION RING | 7 | |
| DAPT60-0422-00 | COMPRESSION RING | 2 | |
| DAPT60-0422-00-IAS | SEAL COMPRESSION SLEEVE DOWTY | 1 | |
| DAPT60-0442-00 | COMPRESSION TOOL | 1 | |
| DAPT60−0188−00 | WRENCH − BEARING, PRESSURE CHAMBER SEAL FAILURE (SERIES 400) | 8 | |
| DAPT60−0386-00 | SEAL COMPRESSION RING | 5 | |
| DAPT60−0386−00 | COMPRESSION RING | 5 | |
| DAPT63-0027-00 | PRESSURE VALVE TOOL | 1 | |
| DAPT65-0080-00 | ADAPTER PRESSURIZATION HYDRAULIC HAND PUMP CONNEC | 4 | |
| DAPT65-0093-00 | ADAPTER PRESSURIZATION (HYDRAULIC HAND PUMP CONNECTOR) | 7 | |
| DAPT65-0093-00-IAS | ADAPTOR-PRESSURIZATION HYD HAND PUMP 3/8" NPT | 1 | |
| DAPT65-0093-00IAS | ADAPTER PRESSURIZATION (HYDRAULIC HAND PUMP CONNECTOR) | 1 | |
| DAPT65−0093−00 | ADAPTER − PRESSURIZATION, HYDRAULIC HAND PUMP (SERIES 400) | 7 | |
| DAR1110 | COMPRESSOR AIR HOSE RUBBER 8MM (300 METRES REQUIRED). | 1 | |
| DAT08AEFKT5003 | REPAIR KIT, HYDRAULIC TUBING (TEMP. REPAIRS, OPERATING PRESSURES UP TO AND INCLUDING 3000 PSI) (APPROVED FOR TITANIUM) | 4 | |
| DBS-CG7 | Tension Verification Compression Fixture for DBS-2100 Hand Operated .250 Wide One-Step Band Application Tool | 3 | |
| DBS-CG8 | Tension Verification Compression Fixture for DBS-2200 Hand Operated .125 Wide One-Step Band Application Tool | 3 | |
| DC-600 | PRESSURE INDICATOR | 3 | |
| DCC2560T1 | DEWALT FLEXVOLT 60V MAX* AIR COMPRESSOR KIT, CORDLESS, 2.5 GALLON (DCC2560T1) | 1 | |
| DCC2560TI | AIR COMPRESSOR | 1 | |
| DCM1590-1 | TOOL,SHOCK STRUT COMPRESSION-NLG | 1 | |
| DCM1590-1 | TOOL,SHOCK STRUT COMPRESSION-NLG | 1 | |
| DEC COMPRESSION TOOL Q464998 | DEC COMPRESSION TOOL Q464998 | 1 | |
| DETKIT8103-5 | TANK PRESSURIZATION SYSTEM | 1 | |
| DETTPS8001 | TANK PRESSURISATION SYSTEM | 1 | |
| DFGS100 | GAUGE, DIGITAL FORCE - TENSION/COMPRESSION, 100 LB. CAPACITY (BRAKE PEDAL FORCE CHECKING) | 1 | |
| DFS-100 | GAUGE, DIGITAL FORCE - TENSION/COMPRESSION, 100LB CAPACITY | 1 | |
| DFS3100 | GAUGE, DIGITAL FORCE - TENSION/COMPRESSION, 100LB | 1 | |
| DFS33790-11 | TOTAL PRESS. PROBE DRAIN HOLE TOOL | 1 | |
| DFS33790-22 | TOOL, PITOT PRESSURE PROB | 3 | |
| DG-10-E | GAUGE PRESSURE | 1 | |
| DG-200 | SPRING SCALE - COMPRESSION - 30 POUNDS | 11 | |
| DG1000B140 | PRESSURE GAUGE | 1 | |
| DG10S | PRESSURE GAUGE DIGITAL 3600 PSI / 250 BAR 63mm | 1 | |
| DG2551N0NAMG2L250BR-4809 | PRESSURE GAUGE DIGITAL 3600 PSI / 250 BAR 63mm | 1 | |
| DG25I | PRESSURE GAUGE DIGITAL 3600 PSI / 250 BAR 63MM | 1 | |
| DG25i | PRESSURE GAUGE DIGITAL 3600 PSI / 250 BAR 63mm | 1 | |
| DG6371 | MLG/NLG SHOCK STRUT PRESSURE TESTER | 1 | |
| DGB1 | DIGITAL PRESSURE GAGE_0 ~ 10000 PSI (10) ±0.5 %_[DGB1] | 1 | |
| DGR2 | DIGITAL PRESSURE GAUGE | 1 | |
| DH05 | HOSE 3/8" X 50' 3000PSI 250F BL, HYDROTEK FOR PRESSURE WASHER SC30006D12 DIESEL WASH; MNF: HYDROTEK | 1 | |
| DH8 - 723M | Q400 PITOT/STATIC PRESSURE ADAPTER KIT "Q400" | 10 | |
| DH8-723 | Q400 PITOT/STATIC PRESSURE ADAPT KIT | 3 | |
| DH8-723 DH8 - 723M | PITOT/STATIC PRESSURE TEST ADAPTER KIT | 1 | |
| DH8-723M | KIT, PITOT/STATIC PRESSURE TEST ADAPTER | 10 | |
| DH8-834 | KIT-DASH 8 100-400 PITOT/STATIC PRESSURE TEST ADAPTER | 1 | |
| DH8-834M | KIT-DASH 8 STATIC PRESSURE TEST | 3 | |
| DH8−723M | ADAPTER KIT − PITOT/STATIC PRESSURE TEST | 10 | |
| DI16-11-00 | PRESSURE GAUGE ADAPTER | 1 | |
| DIGIMANO 2000 | DIGITAL PRESSURE-VACUUM METER | 3 | |
| DIGIMANO2000 | Digital Pressure Vacuum Gauge | 3 | |
| DIGIMANO2500 | DIGITAL PRESS/VACU METER 200/0.05PSI | 1 | |
| DILL8874 | HIGH PRESSURE AIRCRAFT GAUGE | 1 | |
| DILLON GL050 | TENSION AND COMPRESSION FORCE GAUGE | 1 | |
| DIN 125-B31 | PRESSURE DISK | 1 | |
| DIN-124071999 | 124-071-999 ACS/LCS PRESSURE POT COMPLETE | 1 | |
| DIODE_S | HEAT GUN COMPRESSED AIR | 1 | |
| DLT- 0407 | AIR COMPRESSOR | 1 | |
| DLT-0407 | AIR COMPRESSOR COMPAIR DLT 0407 | 1 | |
| DLT01MAPM1012 | PRESSURE GAUGE 0-15000 PSI | 5 | |
| DLT01MAPM1012 | DIAL INDICATING PRESSURE GAUGE (0-15000 PSI) | 5 | |
| DLT02MAPP1000 | MANUAL OR HYDRAULIC PUMP, MAXIMUM PRESSURE 10000 PSI | 12 | |
| DLT0407 | AIR COMPRESSOR | 1 | |
| DM3-3 | DIGITAL PRESSURE GAUGE (PART OF 98D28108647000) | 1 | |
| DM30 | DM30(±30MBARDIGITALPRESS.METER) | 1 | |
| DMC1319 | BOMBARDIER GLOBAL EXPRESS TOOL KIT | 4 | |
| DMTC003 | DMT 4132 DRILL PRESS | 1 | |
| DN150 | METAL EXPANSION JOINT: 6”INCH, LENGTH: 180MM. BELLOW MATERIAL: AISI304/321 STAINLESS STEEL FLANGE MATERIAL: ST37, 2 CARBON STEEL, WORKING PRESSURE: PN16 WORKING TEMPERATURE: 80/427C MOVEMENT -20/+10MM(30MM) | 1 | |
| DOLR | GAUGE PRESSURE 0-5000 PSI | 1 | |
| DP-001 | ABSOLUTE PRESSURE SENSOR TOOL | 1 | |
| DP102L | 10" DRILL PRESS | 1 | |
| DP1610 | CALIBRATION PRESSURE | 1 | |
| DP1615 | PRESSURE CALIBRATOR | 1 | |
| DP200-DD-04 | PRESSURE GAUGE (0-20 HPA PRECISSION 5 ) | 1 | |
| DPG-000 | DIGITAL PRESSURE GAUGE | 1 | |
| DPG-102 | GAUGE PRESS DIGITAL | 2 | |
| DPG-103 | DIGITAL PRESSURE GAUGE (30.00 PSIG) WITH 0.25% ACCURACY | 1 | |
| DPG-105 | MANOMETER (MERIAM FLUID) DIGITAL PRESSURE GAUGE 0-100 PSI. 0. | 1 | |
| DPG-106 | DIGITAL PRESSURE GAUGE 0-200 PSI; 0. | 1 | |
| DPG-107 | GAUGE PRESS DIGITAL | 1 | |
| DPG-108 | DIGITAL PRESSURE GAUGE | 1 | |
| DPG-109 | GAUGE PRESS DIGITAL | 2 | |
| DPG1000B-100G | PRESSURE GAUGE | 1 | |
| DPG1000B-140 | PRESSURE GUAGE | 1 | |
| DPG1000B-140-INH2OG-ON | PRESSURE GAUGE | 1 | |
| DPG1000B-30 | DIGITAL PRESSURE GAG | 1 | |
| DPG1000B-30-INHG-100PSI-ON | PRESSURE GAUGE | 1 | |
| DPG1000B-30V100G | PRESSURE GAUGE | 1 | |
| DPG1000B-30V100G-NS | PRESSURE GAUGE 0-100 | 1 | |
| DPG1000B301NHG100G | PRESSURE GAUGE 0-100 | 1 | |
| DPG1000BBL | PRESSURE GAUGE WITH RUBBER BOOT | 1 | |
| DPG1000BBL5000PSIG-5 | PRESSURE GAUGE | 1 | |
| DPG1000BBL5000PSIG5 | DIGITAL PRESSURE IND.0-5000 PSI | 1 | |
| DPG1001B-15G | HIGH ACCURACY, DIGITAL PRESSURE GAUGE | 1 | |
| DPG107 | DIGITAL PRESSURE GAUGE 0-300 PSI | 1 | |
| DPG109 | DIGITAL PRESSURE GAUGE 0-1000 PSI | 2 | |
| DPG1200 | Digital Pressure Gauge | 1 | |
| DPG2000BBL | PRESSURE GAUGE | 1 | |
| DPG2000BBL300PSIG-5 | 0-300 PSI DIGITAL PRESSURE DGAUGE | 2 | |
| DPG2000BBL5000PSIG-5 | DIGITAL PRESSURE GAUGE 5000PSI (CECOMP) | 1 | |
| DPG2000BBL5000PSIGD4HA10 | GAUGE,PRESSURE,DIGITAL,RANGE 0-5000PSIG, | 1 | |
| DPG217 | DIGITAL PRESSURE GAUGE 0-300 PSI | 1 | |
| DPG7000-300 | ADVANCED, HIGH ACCURACY, DIGITAL PRESSURE GAUGE WITH NEMA 4X CASE | 1 | |
| DPG7000-7K | DIGITAL PRESSURE GAGE | 1 | |
| DPG7010-1K | HIGH-ACCURACY DIGITAL PRESSURE GAUGE 0 TO 1000 | 1 | |
| DPG7010-200 | DIGITAL PRESSURE GAUGE | 1 | |
| DPG7010-500 | HIGH-ACCURACY DIGITAL PRESSURE GAUGE 0 TO 500 PSI | 1 | |
| DPG7025-500 | DIGITAL PRESSURE GAUGE, 0-500 PSI RANGE | 1 | |
| DPG8000-300 | DIGIT PRESS GAUGE | 1 | |
| DPG8001-15 | GAUGE PRESSURE 0-15 PSI | 1 | |
| DPG8001-200 | DIGITAL PRESSURE GAUGE, 200 PSI, -20 °C TO 60 °C, 0.25% ACCURACY, 1/4" MNPT | 1 | |
| DPGA-08 | DIGITAL PRESSURE GAUGE | 1 | |
| DPGA-10 | PRESSURE GAUGE 0 TO 300 PSI | 1 | |
| DPI 145 | MULTIFUCTION PRESSURE INDICATOR | 3 | |
| DPI 314 | ENGINE PRESSURE RATIO TEST SET | 1 | |
| DPI 610 | DIGITAL PRESSURE CALIBRATOR | 11 | |
| DPI 705 | DIG. PRESSURE IND. | 1 | |
| DPI 800 | PRESSURE GAUGE | 1 | |
| DPI-145 | Aero Precision Multi-Function Pressure Indicator | 3 | |
| DPI-145R | Pressure Indicator with Aeronautics Option | 1 | |
| DPI-530 | Digital Pressure Controller | 1 | |
| DPI-601 | Digital Pressure Indicator | 2 | |
| DPI-603-AB | PRESSURE CALIBRATOR WITH VACUUM KIT & BATTERY KIT | 1 | |
| DPI-610 | Pressure control Druck | 11 | |
| DPI-610 AERO | AERO PORTABLE PRESSURE CALIBRATOR | 1 | |
| DPI-610 Aero | Aero Portable Pressure Calibrator | 1 | |
| DPI-615PC | Portable Pressure Calibrator | 1 | |
| DPI104 | DIGITAL PRESSURE GAUGE | 1 | |
| DPI145 | MULTIFUNCTION PRESSURE CALIBRATOR | 3 | |
| DPI515 | CONTROLLER-PNEUMATIC PRESSURE | 1 | |
| DPI601 | Kit Pressure Test | 2 | |
| DPI605R | "PRESSURE TRANSDUCER, | 1 | |
| DPI610 | PRESSURE CALIBRAT. | 11 | |
| DPI610 AERO | AERO PORTABLE PRESSURE CALIBRATOR | 1 | |
| DPI610-IS / DPI615-IS | Safe Portable Pressure Calibrator | 1 | |
| DPI610A | AERO PORTABLE PRESSURE CALIBRATOR | 3 | |
| DPI610E | TEST CELL PRESSURE CALIBRATOR, DRUCK | 1 | |
| DPI610PC | PORTABLE PRESSURE CALIBRATOR | 1 | |
| DPI611 | PORTABLE PRESSURE CALIBRATOR | 2 | |
| DPI611-07G | DPI 611 -1BAR TO 2BAR PRESSURE CALIBRATOR | 2 | |
| DPI615 | PRESSURE CALIBRATOR DPI615 | 1 | |
| DPI615SHC | PRESSURE CALIBRATOR DPI615 | 1 | |
| DPI615SPC | PRESSURE CALIBRATOR DPI615 | 1 | |
| DPI705 | DIGITAL PRESSURE INDICATOR (DPI) | 1 | |
| DPI705-2 BAR-R | MANOMETER (DIGITAL PRESSURE) 0-15 PSIG | 1 | |
| DPI705E-IS-P | DIGITAL PRESSURE INDICATOR (DPI) | 1 | |
| DPI802 | PRESSURE LOOP CALIBRATOR | 1 | |
| DPPH100 | 100 LBS MECHANICAL FORCE GAUGE PUSH PULL TENSION COMPRESSION | 2 | |
| DPPV-KIT | HAND PUMP PRESS/ VAC | 1 | |
| DPS-350 | pitot−static pressure | 10 | |
| DPS1000 | TESTER - PITOT / STATIC PRESSURE (HIGH PRECISION) | 9 | |
| DPS350 | THERMO. PRESSURE TEST SET | 10 | |
| DPSA-350 | TEST KIT − PITOT/STATIC PRESSURE (HIGH PRECISION) | 1 | |
| DR-33 | REGULATOR PRESSURE ATR G 1/2 INCH PORTS | 1 | |
| DRT 173207 | DRT 173207 PRESS TOOL | 1 | |
| DRT 9360/5 | PRESS TOOL | 1 | |
| DRT173207 | Press Tool | 1 | |
| DRT173207PM | DRT 173207 PRESS TOOL | 1 | |
| DRT174-204-ITEM-1 | press tool | 1 | |
| DRT174186 | press pad | 1 | |
| DRT174200 | press tool | 1 | |
| DRT174201 | press pad | 1 | |
| DRT174204ITEM-2 | press pad | 1 | |
| DRT174204ITEM-3 | press pad | 1 | |
| DRT20166 | PRESS PAD | 1 | |
| DRT59360/3 | PRESS TOOL | 1 | |
| DRT59360/4 | PRESS TOOL | 1 | |
| DRT59360/7 | PRESS TOOL | 1 | |
| DRT61454-160 | PAD-PRESS | 1 | |
| DRT61458-117 | PAD-PRESS | 1 | |
| DRT61458-122 | PAD-PRESS | 1 | |
| DRT61458-124 | PAD-PRESS | 1 | |
| DRT61458-126 | PAD-PRESS | 1 | |
| DRT61458-134 | PAD-PRESS | 1 | |
| DRT61458-14 | PAD-PRESS | 1 | |
| DRT61458-16 | PAD-PRESS | 1 | |
| DRT61458-18 | PAD-PRESS | 1 | |
| DRT61458-19 | PAD-PRESS | 1 | |
| DRT61458-23 | PAD-PRESS | 1 | |
| DRT61458-241 | PAD-PRESS | 1 | |
| DRT61458-253 | PRESS-PAD | 1 | |
| DRT61458-275 | PAD-PRESS | 1 | |
| DRT61458-278 | PAD-PRESS | 1 | |
| DRT61458-29 | PAD-PRESS | 1 | |
| DRT61458-352 | PAD-PRESS | 1 | |
| DRT61458-356 | PAD-PRESS | 1 | |
| DRT61458-357 | PAD-PRESS | 1 | |
| DRT61458-358 | PAD-PRESS | 1 | |
| DRT61458-360 | PAD-PRESS | 1 | |
| DRT61458-361 | PAD-PRESS | 1 | |
| DRT61458-378 | PAD-PRESS | 1 | |
| DRT61458-395 | PAD-PRESS | 1 | |
| DRT61458-396 | PAD-PRESS | 1 | |
| DRT61458-397 | PAD-PRESS | 1 | |
| DRT61458-399 | PAD-PRESS | 1 | |
| DRT61458-400 | PAD-PRESS | 1 | |
| DRT61458-401 | PAD-PRESS | 1 | |
| DRT61458-402 | PAD-PRESS | 1 | |
| DRT61458-403 | PAD-PRESS | 1 | |
| DRT61458-405 | PAD-PRESS | 1 | |
| DRT61458-406 | PAD-PRESS | 1 | |
| DRT61458-407 | PAD-PRESS | 1 | |
| DRT61458-408 | PAD-PRESS | 1 | |
| DRT61458-409 | PAD-PRESS | 1 | |
| DRT61458-410 | PAD-PRESS | 1 | |
| DRT61458-412 | PAD-PRESS | 1 | |
| DRT61458-413 | PAD-PRESS | 1 | |
| DRT61458-414 | PAD-PRESS | 1 | |
| DRT61458-415 | PAD-PRESS | 1 | |
| DRT61458-416 | PAD-PRESS | 1 | |
| DRT61458-417 | PAD-PRESS | 1 | |
| DRT61458-418 | PAD-PRESS | 1 | |
| DRT61458-420 | PAD-PRESS | 1 | |
| DRT61458-435 | PRESS-PAD | 1 | |
| DRT61458-436 | PAD-PRESS | 1 | |
| DRT61458-437 | PAD-PRESS | 1 | |
| DRT61458-438 | PAD-PRESS | 1 | |
| DRT61458-441 | PAD-PRESS | 1 | |
| DRT61458-442 | PAD-PRESS | 1 | |
| DRT61458-443 | PAD-PRESS | 1 | |
| DRT61458-444 | PAD-PRESS | 1 | |
| DRT61458-445 | PAD-PRESS | 1 | |
| DRT61458-446 | PAD-PRESS | 1 | |
| DRT61458-447 | PAD-PRESS,DRAW BOLT | 1 | |
| DRT61458-448 | PAD-PRESS, DRAW BOLT | 1 | |
| DRT61458-449 | PAD-PRESS | 1 | |
| DRT61458-450 | PAD-PRESS | 1 | |
| DRT61458-451 | PAD-PRESS | 1 | |
| DRT61458-452 | PAD-PRESS | 1 | |
| DRT61458-455 | PAD-PRESS | 1 | |
| DRT61458-61 | PAD-PRESS | 1 | |
| DRT61458-68 | PAD-PRESS | 1 | |
| DRT61458-8 | PAD-PRESS | 1 | |
| DRT61458-87 | PAD-PRESS | 1 | |
| DRT61480-360 | PAD-PRESS | 1 | |
| DRT61498-406 | PAD-PRESS | 1 | |
| DRT61530-2 | PAD-PRESS,ROD | 1 | |
| DRT65745 | PRESSPAD | 1 | |
| DRT65754 | PRESSPAD | 1 | |
| DRT66814 | PAD-PRESS | 1 | |
| DRT66888-3 | PAD-PRESS | 1 | |
| DRT66888-30 | PAD-PRESS | 1 | |
| DRT66891-1 | PAD-PRESS, DOUBLE ENDED | 1 | |
| DRT67079 | ADAPTOR-PRESS,TOP | 1 | |
| DRT67144 | PRESS PAD | 1 | |
| DRT67308 | SPRING COMPRESSOR | 1 | |
| DRT67326 | FIXTURE-COMPRESSION | 1 | |
| DRT67353 | PRESS PAD | 1 | |
| DRT68003 | COMPRESSOR - SPRING | 13 | |
| DRT68052-10 | PRESS PAD | 1 | |
| DRT68052-11 | PRESS PAD | 1 | |
| DRT68052-12 | PRESS PAD | 1 | |
| DRT68052-13 | PRESS PAD | 1 | |
| DRT68052-14 | PRESS PAD | 1 | |
| DRT68052-15 | PRESS PAD | 1 | |
| DRT68052-16 | PRESS PAD | 1 | |
| DRT68052-17 | PRESS PAD | 1 | |
| DRT68052-18 | PRESS PAD | 1 | |
| DRT68052-19 | PRESS PAD | 1 | |
| DRT68052-20 | PRESS PAD | 1 | |
| DRT68052-21 | PRESS PAD | 1 | |
| DRT68052-22 | PRESS PAD | 1 | |
| DRT68052-23 | PRESS PAD | 1 | |
| DRT68052-24 | PRESS PAD | 1 | |
| DRT68052-25 | PRESS PAD | 1 | |
| DRT68052-26 | PRESS PAD | 1 | |
| DRT68052-27 | PRESS PAD | 1 | |
| DRT68052-28 | PRESS PAD | 1 | |
| DRT68052-29 | PRESS PAD | 1 | |
| DRT68052-30 | PRESS PAD | 1 | |
| DRT68052-31 | PRESS PAD | 1 | |
| DRT68052-32 | PRESS PAD | 1 | |
| DRT68052-33 | PRESS PAD | 1 | |
| DRT68052-34 | PRESS PAD | 1 | |
| DRT68052-35 | PRESS PAD | 1 | |
| DRT68052-36 | PRESS PAD | 1 | |
| DRT68052-37 | PRESS PAD | 1 | |
| DRT68052-38 | PRESS PAD | 1 | |
| DRT68052-39 | PRESS PAD | 1 | |
| DRT68052-40 | PRESS PAD | 1 | |
| DRT68052-41 | PRESS PAD | 1 | |
| DRT68052-42 | PRESS PAD | 1 | |
| DRT68052-44 | PRESS PAD | 1 | |
| DRT68052-45 | PRESS PAD | 1 | |
| DRT68052-6 | PRESS PAD | 1 | |
| DRT68052-7 | PRESS PAD | 1 | |
| DRT68052-8 | PRESS PAD | 1 | |
| DRT68052-9 | PRESS PAD | 1 | |
| DRT68054 | FRAMELOADING PRESS | 1 | |
| DRT68318 | PAD-PRESS | 1 | |
| DRT68325 | PAD-PRESS | 1 | |
| DRT68349 | PAD-PRESS | 1 | |
| DRT68482 | PRESSURE BLANK | 1 | |
| DRT68486 | PRESS PAD AND STOP | 1 | |
| DRT68829-1 | PRESS PAD | 1 | |
| DRT69426 | SPRING COMPRESSOR | 5 | |
| DRUCK DPI605R | PRESSURE TRANSDUCER W/AMPLIFIER | 1 | |
| DRYBAY | DRY BAY PRESS/VACUUM TEST SET TOOL | 1 | |
| DS4 MKII | LOW PRESSURE ALARM | 1 | |
| DSA017 | COOLANT PRESS. TEST | 1 | |
| DSA018 | COOLANT PRESS. TEST | 1 | |
| DSA020 | PRESSURE GAUGE 0-‐100 | 1 | |
| DSA431 | PRESSURE GAUGE | 1 | |
| DSA457 | COOLANT PRESS. TEST | 1 | |
| DSR2829-08 | GAUGE HIGH PRESSURE | 2 | |
| DSR2829-09 | GAUGE TIRE PRESSURE | 1 | |
| DSR2829-9 | Pressure Gauge | 1 | |
| DSR4341-1005 | GAUGE PRESSURE | 1 | |
| DSR43411005 | DUNLOP PRESSURE GAUGE. | 1 | |
| DST190 | PRESS PAD | 1 | |
| DST190-144 | PRESS PAD | 1 | |
| DST190-146 | PRESS PAD | 1 | |
| DST190-148 | PRESS PAD | 1 | |
| DST190-150 | PRESS PAD | 1 | |
| DST190-151 | PRESS PAD | 1 | |
| DST190-152 | PRESS PAD | 1 | |
| DST190-153 | PRESS PAD | 1 | |
| DST190-154 | PRESS PAD | 1 | |
| DST190-155 | PRESS PAD | 1 | |
| DST190-156 | PRESS PAD | 1 | |
| DST190-157 | PRESS PAD | 1 | |
| DST190-158 | PRESS PAD | 1 | |
| DST190-159 | PRESS PAD | 1 | |
| DST190-160 | PRESS PAD | 1 | |
| DST190-161 | PRESS PAD | 1 | |
| DST190-162 | PRESS PAD | 1 | |
| DST190-163 | PRESS PAD | 1 | |
| DST190-164 | PRESS PAD | 1 | |
| DST190-165 | PRESS PAD | 1 | |
| DST190-166 | PRESS PAD | 1 | |
| DST190-167 | PRESS PAD | 1 | |
| DST190-168 | PRESS PAD | 1 | |
| DST190-169 | PRESS PAD | 1 | |
| DST190-170 | PRESS PAD | 1 | |
| DST190-171 | PRESS PAD | 1 | |
| DST190-172 | PRESS PAD | 1 | |
| DST190-173 | PRESS PAD | 1 | |
| DST190-174 | PRESS PAD | 1 | |
| DST190-175 | PRESS PAD | 1 | |
| DST190-188 | PRESS PAD | 1 | |
| DST190-189 | PRESS PAD | 1 | |
| DST190-190 | PRESS PAD | 1 | |
| DST190-191 | PRESS PAD | 1 | |
| DST190-192 | PRESS PAD | 1 | |
| DST190-193 | PRESS PAD | 1 | |
| DST190-194 | PRESS PAD | 1 | |
| DST190-195 | PRESS PAD | 1 | |
| DST190-196 | PRESS PAD | 1 | |
| DST190-197 | PRESS PAD | 1 | |
| DST190-198 | PRESS PAD | 1 | |
| DST190-199 | PRESS PAD | 1 | |
| DST190-201 | PRESS PAD | 1 | |
| DST190-203 | PRESS PAD | 1 | |
| DT | PRESSURE TRANSMITER | 1 | |
| DV 1033 | PRESSURE GAUGE | 1 | |
| DV-1014 | BLONDELLE PRESSURE GAUGE 0-60 BAR- PSI | 1 | |
| DV1014 | PRESSURE GUAGE (O TO 6) | 1 | |
| DV1015 | PRESSURE GUAGE 0-100 BAR | 1 | |
| DV1016 | PRESSURE GAUGE 0-6 BAR | 1 | |
| DV1021 | HIGH PRESSURE HAND PUMP | 1 | |
| DV1033 | PRESSURE GAUGE 0-16 BAR | 1 | |
| DV1037 | PRESSURE GUAGE | 1 | |
| DV502 | HIGH PRESSURE 2600 MM | 1 | |
| DV5554-63-0-10 | GAUGE PRESSURE | 1 | |
| DWYER DPGA-08 | GAUGE PRESSURE | 1 | |
| DZZ7238-1 | KEEPER – PRESSURE TEST | 1 | |
| DZZ7254-1 | CLG Pressure Test Tool | 1 | |
| DZZ7386-1 | NEGATIVE PRESSURE PUMP | 1 | |
| DZZ7387-1 | NEGATIVE PRESSURE MANOMETER | 1 | |
| DZZ7696-1 | TEST SET - PRESS REG | 1 | |
| Delta-P Test Stand | Pressure test system for leak detection fuselage, including adapter A320 cargo door | 1 | |
| E-085 | ARBOR PRESS | 1 | |
| E-2A | CYLINDER DIFFERENTIAL PRESSURE TESTER | 6 | |
| E08602 | PROOF PRESSURE TEST STAND | 1 | |
| E10385 | FILLER & AMP PRESSURISATION UNIT | 1 | |
| E12-258 | LOW PRESSURE REGULATOR | 1 | |
| E13-N198J | HIGH PRESSURE REGULATOR | 1 | |
| E2 | DIFF PRESSURE TESTER UP TO 5" & INC 5" | 1 | |
| E2-M | DIFFERENTIAL CYLNDER PRESS.TESTER WITH | 5 | |
| E2A | EASTERN TECH DIFFERENTIAL CYLINDER PRESSURE TESTER | 6 | |
| E2A DIFF CYL | DIFFERENTIAL CYLINDER PRESSURE TESTER MODEL E2A | 1 | |
| E2A-1000 | Eastern Technology E2A-1000 Aircraft Engine Differential Cylinder Pressure Tester | 3 | |
| E2A1000 | TESTER: CYLINDER PRESSURE, | 3 | |
| E2G54598 | CAP - PRESSURE, P13.0 MANIFOLD | 1 | |
| E2G55318 | CAP - PRESSURE, P13.0 MANIFOLD | 1 | |
| E2J46648 | PRESSING TOOL | 1 | |
| E2J54043 | SPRING COMPRESSOR | 1 | |
| E2J57129 | IP COMPRESSOR TURNING TOOL | 6 | |
| E2J62394 | BAR - ALIGNMENT, LOW PRESSURE (LP) TURBINE | 1 | |
| E2M | EASTERN TECH DIFFERENTIAL CYLINDER PRESSURE TESTER | 5 | |
| E2M-1000 | Eastern Technology E2M-1000 Big Bore Aircraft Engine Differential Cylinder Pressure Tester | 1 | |
| E4A-30-100-802 AA1 | PRESSURE FUEL KIT | 1 | |
| E53835 | Torque Adapter, Pressure Differential | 1 | |
| E53835, E53837 | Torque Adapter, Pressure Differential Sensor | 1 | |
| E53836 | Assembly Wrench, Pressure Differential Sensor | 1 | |
| E53836 | Wrench Assembly, Pressure Differential Sensor | 1 | |
| E58460 | AMPLIFIER PRESS ASSEMBLY | 1 | |
| E60229-001 | SPRING COMPRESSOR | 1 | |
| E61012-001 | PRESSURE FILTER REMOVAL TOOL | 1 | |
| E61751-00-0001 | PRESSURE REDUCER | 8 | |
| E61751-00-0002 | REDUCER-PRESSURE | 1 | |
| E79-800PRESSADP/939 | ADAPTER-CABIN PRESSURE TEST | 1 | |
| E91122323R0400 | PRESSURE HOSE | 1 | |
| EAA0247G70A | BEAD DEPRESSOR | 1 | |
| EAA0350G78A | PRESSURE LIMITER VALVE-4022926 | 1 | |
| EAA0358G85A | BEAD DEPRESSOR CLAMP | 1 | |
| EAA0439G92A | AIR FILTER LUBE PRESS REG | 1 | |
| EAC0058D07A | CUP-PRESSURE | 1 | |
| EAC0058D08A | PRESSURE DISK | 1 | |
| EAS/B/1206 | CHECK FIXTURE EQUIPMENT - PRESSURE RELIEF VALVE | 1 | |
| EAX0024B30A | PRESSURE TRANSDUCER CABLE EXT | 1 | |
| EAX0024B40A | PRESSURE TRANSDUCER Y ADAPTER | 1 | |
| EB841800890 | COILED GROUND CORD WITH PRESS STUD 1.5M | 1 | |
| EC-1851 | PRESSURE TRANSDUCER 0-1500 | 1 | |
| EC-1852 | PRESSURE TRANSDUCER 0-5000 | 1 | |
| ECP10-UK | Wallmount Manual can press 10 ltr UK | 1 | |
| ECP30 | Pneumatic Tin Can Press 30 Litre | 1 | |
| ED1107-02.77 | PORTABLE DIGITAL PRESSURE INDICATOR | 1 | |
| EE3030A | PRESSURE WASHER (PRESSURE-PRO, EAGLE SERIES) | 1 | |
| EEDF502-3 | FORD 7.3L FUEL PRESSURE ADPTR | 1 | |
| EEDF502-4 | FORD 6.0L FUEL PRESSURE ADPTR | 1 | |
| EEDF700-1 | COMPRESSION TEST HOSE ASSEMBLY | 1 | |
| EEDF700-2 | FUEL PRESSURE TEST HOSE ASSEMB | 1 | |
| EEDF700-MSTR | WIRELES PRESSURE DIESEL1000PSI | 1 | |
| EEDM5030 | PRESSURE ADPT 500 | 1 | |
| EEFI5001P2 | PRESSURE HOSE ASSEMBLY | 1 | |
| EEFI500A | MSTR FUEL INJCT PRESS GAGE SET | 1 | |
| EEFI500A-J | MSTL FUEL INJCT PRESS GAGE SET | 1 | |
| EELD600HD | HIGH PRESSURE SMOKE MACHINE | 1 | |
| EEMS301A05 | PRESS TRANSDUCER SPLIT ADAPTER | 1 | |
| EEMS324PSA | PRESSURE TRANSDUCER ADAPT VT | 1 | |
| EEPD500 | DIESEL COMPRESSION GAUGE | 1 | |
| EEPD501 | DIESEL COMPRESSION TEST KIT | 1 | |
| EEPV302AH | PRESSURE TRANSDUCER 0-5000PSI | 1 | |
| EEPV302AL | PRESSURE TRANSDUCER 0-100 PSI | 1 | |
| EEPV302AT | PRESSURE TRANSDUCER 0-500PSI | 1 | |
| EEPV312C | GLOW PLUG COMPRESSION ADAPTOR | 1 | |
| EEPV313C | DIESEL COMPRESSION ADAPTOR | 1 | |
| EEPV314C | DIESEL COMPRESSION ADAPTOR | 1 | |
| EEPV317C | DIESEL COMPRESSION ADAPTOR | 1 | |
| EEPV5-BOOT1 | PRESSURE OR LEAKAGE GAUGE BOOT | 1 | |
| EEPV5-BOOT2 | 500 PSI PRESSURE GAUGE BOOT | 1 | |
| EEPV500 | AUTOMOTIVE COMPRESSION SET | 1 | |
| EEPV503 | MOTORCYCLE COMPRESSION SET | 1 | |
| EEPV507 | ENGINE OIL PRESSURE SET | 1 | |
| EEPV508 | TRANNY AND ENGINE PRESSURE SET | 1 | |
| EEPV508-H | 10FT HIGH PRESSRE HOSE ASSMBLY | 1 | |
| EEPV511 | VACUUM AND BACK PRESSURE SET | 1 | |
| EEPV511-SJ | VACUUM PRESSURE GAUGE SET | 1 | |
| EEPV5G12T | COMPRESSION GAUGE ADAPTOR | 1 | |
| EEPV5J-100G | PRESSURE GAUGE AND BOOT | 1 | |
| EEPV600 | COMPRESSION SET2 CHROME ADAPTR | 1 | |
| EEPV700-1 | COMPRESSION TEST ADAPTOR | 1 | |
| EEPV700-2 | FUEL PRESSURE TEST ADAPTOR | 1 | |
| EEPV700-3 | OIL PRESSURE TEST ADAPTOR | 1 | |
| EEPV700-4 | TRANS PRESSURE TEST ADAPTOR | 1 | |
| EEPV700-CC | PRESSURE TESTER CARRY CASE | 1 | |
| EEPV700-MSTR | WIRELESS PRESSURE TEST MASTER | 1 | |
| EEPV700-WT | WIRELESS PRESS TRANSMT W ADPT | 1 | |
| EMA84 | PORT DIGITAL PRESS MANOM | 7 | |
| EMA84-10-5-1 | DIGITAL PRESSURE GAUGE | 2 | |
| EMA84-100-5-0 | PORTABLE DIGITAL PRESSURE GAUGE MEASUREMENT RANGE: 0…100KPA MARGIN OF ERROR: 0.5% OF MAX VAMANOMETER | 1 | |
| EMB-00022-002 | Pre-Pressurization Test Set | 1 | |
| EMB-00168-00 | BOX, LEAKAGE TEST 01 TO PRESSURIZE THE AFT FUEL TANK BLADDER 01 TO PRESSURIZE THE AFT FUEL TANK SHROUD | 1 | |
| EMB-00168-0001 | PRESS TEST BOX | 1 | |
| EMB-00168-001 | PRESSURE TEST BOX | 8 | |
| EMB-00168-003 | LEAK TEST BOX WTH 0-150 PRESSURE GAUGE | 7 | |
| EMB-00453-003 | REGULATOR, OXYGEN PRESSURE | 1 | |
| EMB-00471-007 | DEVICE - COMPRESS, GAS SPRING | 1 | |
| EMB-01411-005 | ADAPTER - CABIN PRESSURIZATION TEST | 2 | |
| EMB-01411-401 | Adapter-Cabin Pressurization Test | 1 | |
| EMB00471-007 | COMPRESSION TOOL - GAS SPRING | 1 | |
| EN 837 | PRESSURE GAUGE (0-600BAR) | 1 | |
| EN562 | PRESSURE GAGE | 2 | |
| EN837-1 | PRESSURE GAUGE 0-14PSI | 2 | |
| EN837-1-250 BAR | PRESSURE GAUGE | 1 | |
| EN837-1-30PSI | PRESSURE GAUGE 0-30 PSI | 1 | |
| EN837-1-5000PSI | PRESSURE GAUGE 0-5000 PSI | 1 | |
| EN837-1-60 BAR | PRESSURE GAUGE | 1 | |
| EN837-1-6000PSI | PRESSURE GAUGE 0-6000 PSI | 1 | |
| EN837-1-600PSI | PRESSURE GAUGE 0-600 PSI | 1 | |
| EN837-1WIKA | LOW-PRESSURE GAUGE (50PSI) | 1 | |
| EN873-1 | PRESSURE GAUGE 0-4 ENT | 1 | |
| ENEH-7202 | PRESSURE HOSE | 1 | |
| EOR117.0X04.00 | Seal Kit for boost & pressure | 1 | |
| EP40403 | PRESSURE GAUGE 0-400BAR | 1 | |
| EP510C | HYD COMPRESSION TOOL | 1 | |
| EPC1 | COMPRESSOR RECIPROCATING | 2 | |
| EPC300A | DIGITAL PRESSURE PV TESTER. | 1 | |
| ER8040G01 | VALVE INTER PRESS CHECK | 1 | |
| ERJ-CDP | TEST HOSE CABIN DIFFERENTIAL PRESSURE | 1 | |
| ETPU100-03C | ETPU # ENGINE TRANSIENT PRESSURE UNIT | 1 | |
| EURA 100 | PRESSURE WASHER | 1 | |
| EV504 | HIGH PRESSURE 12X100 | 1 | |
| EWO151 | GAUGE - TIRE PRESSURE, 0-25 BAR (0-350 PSI) | 1 | |
| EXSH670−31014−1 | Calibration reference standard pressure bulkhead machined frames FS693.00 and FS847.00 contains subsurface electrical discharge machined notches. (Bombardier Inc.) | 1 | |
| EXT025 | PROPELLER HUB PRESS. TOOL ATR 72 | 1 | |
| EXTENSI0NCT1 | EXTENSION: COMPRESSION TESTER,18 MM, | 1 | |
| EXTENSI0NCT12 | EXTENSION: COMPRESSION TESTER,12 MM, | 1 | |
| EXTENSI0NCT14 | EXTENSION: COMPRESSION TESTER,14 MM, | 1 | |
| Ex-71583 | Jig-drill, compressor expresser extension, shaft b | 1 | |
| Ex-74971 | Fixture, holding, compressor vane assy | 1 | |
| Ex-74972 | Fixture, holding, compressor vane assy | 1 | |
| F11343 | PRESSING FIXTURE | 1 | |
| F20200-35 | PRESSURE GAUGE | 1 | |
| F218515000 | TEST PRESSURE | 1 | |
| F21878100-2 | SHOCK ABSORBER PRESSURE CHARGING TOOL | 1 | |
| F23393000 | COMPRESSION FIXTURE | 1 | |
| F2669300 | COMPRESSION TOOL | 1 | |
| F26693000 | INSTAL REMOV RETAINING COMPRESSION TOOL | 7 | |
| F26811000 | COMPRESSION TOOL | 1 | |
| F26826000 | PRESSURE BRAKE TEST SET | 1 | |
| F2727300 | TOOL USED TO TEST THE PRESSURE RELIEF VALVE | 1 | |
| F27273000 | TOOL USED TO TEST THE FUSE PLUG ASSEMBLIES (1-380) OR (1-380A) AND THE PRESSURE RELIEF VALVE (1-060) | 2 | |
| F27290200 | TEST-ELECTRONIC PRESSURE SWITCH | 1 | |
| F27474000 | TOOL-COMPRESSION | 1 | |
| F27478000 | COMPRESSION SCREW | 1 | |
| F27483000 | TOOL-COMPRESSION, PRESS | 1 | |
| F27507000 | COMPRESSIONTOOL | 1 | |
| F27516000 | TOOL-COMPRESSION/DECOMPRESSION | 1 | |
| F29-24-600 | PRESSURE GAUGE | 1 | |
| F2MA93205 | BRAKING PRESSURE CHECKING TOOL | 1 | |
| F2MA932305 | BRAKING PRESSURE CHECKING TOOL | 1 | |
| F2MA952500 | COMPRESSION TOOL FOR SPRING OF BAGGAGE COMPARTMENT DOOR | 1 | |
| F50-29-15-01FAB | TUYAUTERIE DE PRESSU | 1 | |
| F508 | AUTOMATIC TRANSMISSION PRESSURE GAUGE SET | 1 | |
| F601R2131TFIX1-1 | PRESSURIZATION TEST SAFETY NET | 1 | |
| F65-0-4793 | ACTUATOR PRESSURE TEST ADAPTER | 1 | |
| F65-0-50370 | Test Adapter (Pressure Fitting) | 1 | |
| F70023 | PLUG ASSY -0 CABIN AIR COMPRESSOR INLET USED TO | 1 | |
| F70026 | COVER ASSY -0 JT3C SOUND SUPPRESSOR USED TO | 1 | |
| F70056 | PLUG ASSY -0 JT3C,JT4A TURBOCOMPRESSOR EX USED | 1 | |
| F70089 | SUPPORT ASSY -0 T/R SOUND SUPRESSOR USED TO | 1 | |
| F70111 | COVER ASSY -0 JT4A ENGINE SOUND SUPRESSOR USED | 1 | |
| F70178 | HAND PRESS ASSY -0 ESCAPE SLIDE TO COMPRESS THE | 1 | |
| F70186-18 | GAUGE, PRESSURE | 1 | |
| F70199 | PRESSURE GAGE 0-300 PSI | 4 | |
| F70199-1 | Low Pressure Gauge | 22 | |
| F70199-17 | TIRE PRESSURE GAUGE | 3 | |
| F70199-2 | PRESSURE GAGE | 7 | |
| F70199-20 | Tire?Pressure?Gauge | 5 | |
| F70199-25 | TIRE PRESSURE GAUGE | 14 | |
| F70199-27 | Pressure Gauge | 3 | |
| F70199-30 | DIGITAL PRESSURE GAUGE FOR F70199-52 | 2 | |
| F70199-52 | USED TO INFLATE AND CONTROL THE TIRE PRESSURE ON THE LANDING GEAR FOR ALL BOEING AIRCRAFTS. THIS TOOL CONSISTS OF AIR CHUCKS FOR BOTH LARGE AND SMALL BORE TIRE VALVE STEMS AND A DIGITAL GAUGE. | 21 | |
| F70199-53 | TIRE PRESSURE GUAGE 0-300 PSI DIGITAL TYPE | 5 | |
| F70200-1 | GAUGE PRESSURE OLEO | 18 | |
| F70200-14 | BOTTLE - NITROGEN CART - SERVICING, STRUT OIL INFLATOR - STRUT, LANDING GEAR GAUGE - PRESSURE, 0-3000 PSIG (0-20685 KPA) WRENCH - TORQ BUCKET - 2.5 GALLON CAPACITYUE | 19 | |
| F70200-15 | HOSE HI-PRESS | 3 | |
| F70200-17 | PRESS REGULATOR SHOCK STRUT 0/300PSI | 9 | |
| F70200-18 | HIGH PRESSURE GAUGE | 22 | |
| F70200-2 | PRESSURE GAGE | 4 | |
| F70200-35 | LANDING GEAR STRUT INFLATOR OR NOSE GEAR PRESSURE SWITCH ASSY | 16 | |
| F70200-6 | AIR CHUCK HIGH PRESS | 11 | |
| F70227 | GROOVE GAGE TO CHECK PRESSURE SEAL RETAINER | 1 | |
| F70326-1 | PRESS PAD | 15 | |
| F71188 | ADAPTER ASSY -0 HYDRAULIC PRESSURE USED DURING | 1 | |
| F71188-500 | Adapter Assy - Hydraulic Pressure | 1 | |
| F71291 | COMPRESSOR - ACTUATOR SPRING, STABILIZER TRIM | 1 | |
| F71291-500 | Compressor - Actuator Spring, Stabilizer Trim | 9 | |
| F71291-501 | COMPRESSOR SPRING ST | 1 | |
| F71329-1 | INTEGRAL PRESSURE/VACUUM ASSY | 1 | |
| F71329-18 | PRESSURE GAUGE | 1 | |
| F71329-37 | PRESSURE SEAL | 2 | |
| F71329-38 | PRESSURE SEAL | 1 | |
| F71429-15 | PRESSURE GAUGE 0-5 PSI | 1 | |
| F72865 | PRESSURE STAKING TOOL USED FOR PRESSURE STAKING | 1 | |
| F72865-1 | PRESSURE STAKING TOOL - FORWARD LINK PIVOT BEARING, THRUST REVERSER | 1 | |
| F72878 | FLANGE -0 PRESSURE TEST L.P. DUCTS USED DURING | 1 | |
| F72884-502 | FUEL PRESS. HYDROSTATIC TESTER | 4 | |
| F72903 | PRESSURE TEST EQUIPMENT KIT | 1 | |
| F72903-24 | OIL BREATHER PRESSURE TEST | 4 | |
| F72903-24 OBPTE | OIL BREATHER PRESSURE TEST EQUIPMEN | 1 | |
| F72909 | SPRING COMPRESSR-CARGO DOOR SPRNG CRTRDG USED | 1 | |
| F72909-1 | SPRING COMPRESSOR | 2 | |
| F72909-2 | TOOL COMPRESS SPRING | 1 | |
| F72919 | TEST FIXTURE -0 PRESSURE OPERATED SELECTOR VALVE | 1 | |
| F72919-1 | TEST FIXTURE - PRESSURE OPERATED SELECTOR VALVE ASSEMBLY | 1 | |
| F72928 | AIR PRESSURE REGULATOR EQPT-ELEVATOR FEEL COMPUTER | 1 | |
| F72928-107 | AIR PRESSURE REGULATOR EQUIPMENT - ELEVATOR FEEL COMPUTER | 1 | |
| F72928-108 | AIR PRESSURE REGULATOR EQUIPMENT - ELEVATOR FEEL COMPUTER | 2 | |
| F72928-109 | AIR PRESSURE REGULATOR EQUIPMENT - ELEVATOR FEEL COMPUTER | 4 | |
| F72928-110 | AIR PRESSURE REGULATOR EQUIPMENT - ELEVATOR FEEL COMPUTER | 4 | |
| F72928-111 | AIR PRESSURE REGULATOR EQUIPMENT - ELEVATOR FEEL COMPUTER | 3 | |
| F72928-190 | REG-AIR PRESS,ELEV FEEL CMPTR | 1 | |
| F72928-25 | AIR PRESS.REG. | 1 | |
| F72928-33 | Air Pressure Regulator Equipment - Elevator Feel Computer | 4 | |
| F72928-34 | Air Pressure Regulator Equipment - Elevator Feel Computer | 1 | |
| F72928-37 | ELEV. FEEL PRESS. | 1 | |
| F72928-52 | Air Pressure Regulator Equipment - Elevator Feel Computer | 4 | |
| F72928-52 / -53 | REGULATOR AIR PRESSURE KIT ELEVATOR FEEL COMP. | 1 | |
| F72928-53 | Air Pressure Regulator Equipment - Elevator Feel Computer | 5 | |
| F72928-54 | Air Pressure Regulator Equipment - Elevator Feel Computer | 2 | |
| F72928-55 | ELEV. FIELD COMP. AIR PRESS REG. | 2 | |
| F72928-58 | Air Pressure Regulator Equipment - Elevator Feel Computer | 11 | |
| F72928-58+A8529 | Air Pressure Regulator Eqpt - Elevator Feel Comp | 1 | |
| F72928-62 | Air Pressure Regulator Equipment - Elevator Feel Computer | 8 | |
| F72928-62-1 | AIR PRESSURE REGULATOR | 1 | |
| F72928-63 | Air Pressure Regulator Equipment - Elevator Feel Computer | 12 | |
| F72928-63-M | PRESSURE REGULATOR | 1 | |
| F72928-63. | Air Pressure regulator Equipment-Elevator Feel Com. | 12 | |
| F72928-XX | Air Pressure Regulator Equipment -Elevator Feel Computer | 1 | |
| F72929-62 | AIR PRESSURE REGULATOR EQUIPMENT - ELEVATOR FEEL COMPUTER | 1 | |
| F72938 | TOOL SET -0 PNEUMATIC DUCT PRESS SYSTEM FOR | 1 | |
| F72938-1 | KIT PLUG PRESSURIZE | 3 | |
| F72938-2 | PNUEMATIC DUCT PRESSURE SYSTEM.. | 1 | |
| F72938-3 | KIT PLUG PRESSURIZE | 1 | |
| F72938-4 | KIT PLUG PRESSURIZE | 1 | |
| F72941 | ADAPTER -0 PRESSURE LIMITING, GREASE GUN TO | 1 | |
| F72941-1 | ADAPTER LIMIT PRESSU | 1 | |
| F72941-2 | ADAPTER LIMIT PRESSU | 1 | |
| F72951-1 | MANOMETER-WATER, PRESSURE RELIEF | 17 | |
| F72973 | ENGINE TRIM PRESSURE GAGE | 1 | |
| F72973-1 | GAGE PT7 PRESSURE ENGINE TRIM | 1 | |
| F72973-10 | GAUGE-PT7 PRESSURE | 3 | |
| F72977 | GAUGE EQUIPMENT - HYDRAULIC BRAKE SYSTEM PRESSURE CHECKING | 1 | |
| F72977-1 | MLG PRESSURE BRAKE TESTER | 1 | |
| F72977-19 | TEST SET 737-HYDRAULIC BRAKE SYSTEM PRESSURE CHECK | 1 | |
| F72977-23 | GAUGE SET, HYD BRAKE SYS PRESSURE | 1 | |
| F72977-33 | Gage Set - Hyd Brake System Pressure Checking | 1 | |
| F72977-39 | GAGE SET-HYDR BRAKE SYSTEM PRESS CHECK | 3 | |
| F72977-4 | ADAPTER PRESSURE BRA | 1 | |
| F72977-44 | Gauge Equipment - Hydraulic Brake System Pressure Checking | 2 | |
| F72977-45 | Gauge Equipment - Hydraulic Brake System Pressure Checking | 5 | |
| F72977-46 | Gauge Equipment - Hydraulic Brake System Pressure Checking | 3 | |
| F72977-462 | GAUGE EQUIPMENT - HYDRAULIC BRAKE SYSTEM PRESSURE CHECKING | 1 | |
| F72977-47 | Gauge Equipment - Hydraulic Brake System Pressure Checking | 5 | |
| F72977-6 | HOSE ASSY PRESSURE B | 1 | |
| F72977-62 | Gauge Equipment - Hydraulic Brake System Pressure Checking | 16 | |
| F72977-62 repair | Gage eqpt-hydraulic brake system pressure checking | 1 | |
| F72977-64 | Adapter Assy - Hyd Brake System Pressure Checking | 12 | |
| F72988-52 | AIR PRESSURE REG | 1 | |
| F76199-1 | PRESSURE GAUGE W/ HOSE | 1 | |
| F80-0-2232 | SEAL COMPRESSING TOOL | 1 | |
| F80-0-4248 | Spring Compression Tool | 1 | |
| F80-0-50345 | SPRING COMPRESSOR | 1 | |
| F80-0-50464 | COMPRESSION SLEEVE | 1 | |
| F80-0-50464-2 | Compression Sleeve | 1 | |
| F80-0-50464PM | COMPRESSION SLEEVE | 1 | |
| F80-0-50887 | PISTON COMPRESSOR | 1 | |
| F80-0-5956 | O-RING COMPRESSION TOOL | 1 | |
| F80-3-114 | Seal compressor | 1 | |
| F80-6-3 | CAP SEAL ID COMPRESSOR TOOL | 1 | |
| F80-6-32 | CAP SEAL I.D COMPRESSOR | 1 | |
| F80-7-25 | Seal Compressor | 1 | |
| F80049-12 | HYDRAULIC STANDBY SYS. PRESS./SHUTOFF VALVE 2ea | 9 | |
| F80049-2 | HYDRAULIC STANDBY SYS. PRESS./SHUTOFF VALVE | 6 | |
| F80049-56 | HYDRAULIC STANDBY SYS. PRESS./SHUTOFF VALVE 2EA | 17 | |
| F80065-1 | SPRING COMPRESSOR FLAP ASYMMETRY MECH | 2 | |
| F80080-5 | SURGE TANK PRESSURE DOOR ASSY | 1 | |
| F80080-82 | PRESSURE DOOR ASSY | 1 | |
| F80113-50 | DRILL PRESS ROLLER SWAGING TOOL | 10 | |
| F801172-7 | PRESS. TEST DOOE | 1 | |
| F80148-1 | PRESSURE TEST DOOR | 1 | |
| F80166 | TEST FIXTURE - PRESSURE RELIEF VALVE, FLAME ARREST | 1 | |
| F80166-1 | Test Fixture - Pressure Relief Valve, Flame Arrestor Surge Tank | 26 | |
| F80172-1 | Pressure Test Door - Integral Wing Tank, Center | 3 | |
| F80172-7 | Pressure Test Door - Integral Wing Tank, Center | 5 | |
| F80172-7-M | PRESSURE TEST DOOR | 1 | |
| F80173 | PRESSURE TEST DOOR ASSY-AUXILIARY FUEL TANK | 1 | |
| F80173-10 | PRESSURE TEST DOOR AUXILIARY FUEL TANK | 2 | |
| F80175-1 | Pressure Test Door Assembly -Center Bladder Wing Tank | 1 | |
| F80206-1 | BRKOUT BOX CAB PRESS | 5 | |
| F80206-1-REV | BREAKOUT BOX-CABIN PRESSURE CONTROL UNIT | 1 | |
| F80211-153 | PLUG SET- PNEUMATIC DUCT PRESSURIZATION | 1 | |
| F80211-164 | Plug Set -Pneumatic Duct Pressurization | 1 | |
| F80233-1 | PLUG TEST PRESS RAM | 2 | |
| F80258-1 | Test Equipment -Wing Dry Bay Pressurization | 2 | |
| FA1417-10 | PORTABLE DIFFERENTIAL PRESSURE PROBE | 1 | |
| FAS028 | FUEL CONDUIT PRESSURE ADAPTER | 1 | |
| FAT2109 | FITTING, PRESSURE TEST, | 1 | |
| FB97A0001 | CONNECTOR-PRESSURIZING,HYDRAULIC TANK | 1 | |
| FC020A | CLEF PRESS SWITCH CF34 3A | 4 | |
| FC022A | 11/16 " 3/8 DRIVE OPEN END - MODIFIED TO TORQUE PRESSURE SWITCHES **MODIFICATION BY V2X** | 6 | |
| FC20B | CLEF PRESS SWITCH CF34 3A | 1 | |
| FC611-32 | SINGLE WIRE BRAID MEDIUM PRESSURE EPDM HOSE/price per ft | 1 | |
| FD1107-02.77 | PORTABLE DIGITAL PRESSURE INDICATOR | 1 | |
| FD1107-04.75 | PNEUMATIC LOW PRESSURE DRY AIR TEST KIT | 1 | |
| FD7043T-1 | TEST FIXTURE - PRESSURE RELIEF VALVE, FLAME ARRESTOR SURGE TANK | 1 | |
| FDIX100 | TENSILE AND COMPRESSIVE FORCE MEASURING | 7 | |
| FDIX50 | TENSILE AND COMPRESSIVE FORCE MEASURING | 4 | |
| FDS40-0213 | L3 FA2100CVR AUDIO DECOMPRESSION | 1 | |
| FDS40-0379 | L-3 FA-2100 CVR AUDIO DECOMPRESSION SOFTWARE | 1 | |
| FDS40-0380 | HONEYWELL SSCVR DECOMPRESSION SOFTWARE - OPTIONAL | 1 | |
| FDS40-5012 | "L-3 FA-2100 CVR AUDIO DECOMPRESSION SOFTWARE | 3 | |
| FDS40-5013 | L-3 FA-2100 CVR Audio Decompression Software | 3 | |
| FDS40-5021 | Honeywell SSCVR Decompression Software - Optional | 2 | |
| FDS40-5033 | Honeywell HFR5-V CVR Audio Decompression Software | 2 | |
| FDS40-5036 | DVD-R CVFDR DECOMPRESSION SOFTWARE | 1 | |
| FDS400-379 | L-3 FA-2100 CVR AUDIO DECOMPRESSION SOFTWARE | 1 | |
| FDS400-380 | HONEYWELL SSCVR DECOMPRESSION SOFTWARE - OPTIONAL | 1 | |
| FE240-500-10/B | PRESSURE GAUGE | 1 | |
| FE256-500-3 | PRESSURE GAUGE | 1 | |
| FE374201/201 | TANK PRESSURE TOOL | 1 | |
| FE374501200 | TANK PRESSURE TOOL | 1 | |
| FERVI 0752 | FERVI 0752 - 230V 750W FLOOR DRILL PRESS WITH DRIVE BELT | 1 | |
| FGFB932305-1 | TOOL BRAKING PRESS CHECK | 1 | |
| FGFB932308-1 | MANO PRESS CONTROL | 1 | |
| FGFB934501-2 | ADAPTER FOR RH STANDBY STATIC PRESSURE PORT | 1 | |
| FGFB934502 | ADAPTER FOR NORMAL STATIC PRESSURE PORT | 1 | |
| FIRE SUPRESSION MANIFOLD TEST SET | FIRE SUPRESSION MANIFOLD TEST SET | 1 | |
| FIRE-PRESS-TEST-PIPE | FIRE PRESS TEST PIPE TOOL | 1 | |
| FK22394 | COVER, ASSY TRANSPORTATION, FRONT LP COMPRESSOR | 3 | |
| FK23406 | COVER, ASSY TRANSPORTATION, RH REAR - LP COMPRESSOR | 3 | |
| FK23407 | COVER, ASSY TRANSPORTATION, LH REAR - LP COMPRESSOR | 3 | |
| FL7441-1 | PRESSURE CALIBRATION KIT | 1 | |
| FLAP-DEPRESSURE-TOOL | FLAP DEPRESSURE TOOL | 1 | |
| FLTT 1A189 | AIR PRESSURE SENSOR | 1 | |
| FLUID PUMP 60 PSI REGULATED PR | FLUID PUMP 60 PSI REGULATED PRESSURE, 1.5 GPM FLOW RATE | 1 | |
| FLUKE 700G | FLUKE PRESSURE GAGE CALIBRATOR | 1 | |
| FLUKE 700G07 | PRESSURE GAUGE CALIBRATOR | 1 | |
| FLUKE 700RG07 | DIGITAL PRESSURE GAUGE 0-500PSI | 1 | |
| FLUKE 718 30G | CALIBRATOR - PRESSURE, FLUKE | 4 | |
| FLUKE 729 | AUTOMATIC PRESSURE CALIBRATOR | 1 | |
| FLUKE 750P06 | PRESSURE MODULE 0 TO 100 PSIG (0 TO 7 BAR) | 1 | |
| FLUKE 754 | PROCESS CALIBRATOR (PRESSURE CALIBRATOR) | 1 | |
| FLUKE-700RG31 | TESTER PRESSURE GAGE | 1 | |
| FLUKE-718 30US | CALIBRATOR - PRESSURE, FLUKE | 2 | |
| FLUKE718 | PRESSURE CALIBRATOR | 1 | |
| FLUKE718 30G | CALIBRATOR - PRESSURE, FLUKE 718 SERIES | 4 | |
| FLUKE71830G | CALIBRATOR - PRESSURE, FLUKE 718 SERIES | 4 | |
| FLUKE922 | DIFFERENTIAL MANOMETER, MAX PRESSURE MEASUREMENT 6PSI | 1 | |
| FLUPV350 | PRESSURE VACUMM MODULE | 1 | |
| FM51-6R300-200BS | HIGH PRESSURE - SPECTRON | 1 | |
| FNTH 3.0K | NITROGEN CYLINDER, 3.0K, HIGH PRESSURE | 1 | |
| FORCE70 | DURA PRESS (70TON) | 1 | |
| FR-203 | DYNATROL PRESSURE TANK SPRAYER | 1 | |
| FR-ILS-OP | PRESSURE REGULATOR | 1 | |
| FRH100014A | FUEL LOW PRESS | 1 | |
| FRO441 | PRESSURE REGULATOR (LOW PRESSURE) | 1 | |
| FRO441/H | PRESSURE REGULATOR (HIGH PRESSURE) | 1 | |
| FRP1215 | DURAMAX FUEL PRESSURE SENSR WR | 1 | |
| FRS156 | PISTON ASSY PRESS | 1 | |
| FS0-0-50464-2 | Compression Sleeve | 1 | |
| FS0-0-50496 | Compression Tool {Optional to FS0-0-50945) | 1 | |
| FS0002 | OIL PRESSURE RELIEF BYPASS VALVE TEST JIG | 1 | |
| FS0007 | Adapter - Pressure Switch | 1 | |
| FS0019 | PRESSURE SWITCH ADAPTER | 1 | |
| FS686500 | PORTABLE COMPRESSED AIR FILTER & REGULA | 1 | |
| FSI67/1 | VALVULA REGULADORA DE NITROGENIO DE ALTA PRESSO | 1 | |
| FSIL0604030A | FITTING, PRESSURE | 1 | |
| FSNDS1350056 | COMPRESSOR 1/2HP 1G LOW PROF | 1 | |
| FSNORS139223 | PUMP SPRAYER COMPRESSED AIR | 1 | |
| FSNPTI25D15P | MANOMETER DIGITAL PRESSURE GA | 1 | |
| FT-20 | POWERPACK COMPRESSOR | 5 | |
| FT130C | SPACE HEATER / COMPRESSOR (BRAND-PEREL) | 1 | |
| FT20 | POW ERPAK POW ERPAK OF HYDR.PRESSURE COMPR | 5 | |
| FUEL DUMP VALVE | FUEL DUMP VALVE PRESSURE TEST FITTI | 1 | |
| FV501 | HIGH PRESSURE 1000 mm 12x100 | 1 | |
| FVS-33203 | Pressure Test Fixture | 1 | |
| FXT-03438 | Spring Compression Fixture | 1 | |
| FXT-03934 | BEARING PRESS FIXTURE | 1 | |
| FXT-04335 | HOLDING COMPRESSION FIXTURE | 1 | |
| FXT-08725-04-REVC | PRESSURE FITTING PCD | 1 | |
| FXT-10459 | FUEL MODULE PRESSURE SENSOR PLUG | 1 | |
| FXT-10514 | PRESS FIXTURE | 1 | |
| FXT-12254 | PRESSURE SENSOR TEST FIXTURE | 1 | |
| FXT-13759 | GEARBOX VENT PRESSURE ADAPTER | 1 | |
| FXT03934 | BEARING PRESS FIXTURE | 1 | |
| FY-150-G1/4'' | ULTRA HIGH PRESSURE HYDRAULIC COUPLER | 1 | |
| FY-CYG-150-2m | ULTRA HIGH PRESSURE HYDRAULIC HOSE | 1 | |
| FY-P-1600 | ULTRA HIGH PRESSURE HYDRAULIC HAND PUMP | 1 | |
| FY5-06436W09-01 | PRESSURIZATION FLANGE-TANK VENTILATION | 1 | |
| FY5-06456W09-01 | TOOL-PRESSURE TEST, APU BLEED SYSTEM | 1 | |
| FZ9-24-0-1500 | Pressure Gauge 0-1500 psi | 1 | |
| FZ9-24-0-3500 | Pressure Gauge 0-3500 psi | 1 | |
| FZ9-24-1500 | Pressure Gauge 0-1500 psi | 4 | |
| FZ9-24-300 | Pressure Gauge 0-300 psi | 2 | |
| FZ9-24-3500 | Pressure Gauge 0-3500 psi | 6 | |
| FZ9-24-60 | Pressure Gauge 0-60 psi | 1 | |
| FZ9-24-600 | Pressure Gauge 0-600 psi | 8 | |
| FZG-24-50 | GAUGE PRESSURE (N1 & N2) | 1 | |
| Fluke 718 300G | PRESSURE CALIBRATOR | 1 | |
| Fluke 718 30US | CALIBRATOR - PRESSURE, FLUKE | 2 | |
| G-1307-01 | SHEAR PIN COMPRESSION TENSION | 3 | |
| G-43014F | PRESSURE GAUGE | 1 | |
| G-4382-1 | GAUGE,PRESSURE | 1 | |
| G-FORCE II 4240 | PRESSURE WASHER CLEANER | 1 | |
| G0LHMT00108 | COMPRESSOR WATER WASHING DOLLY | 1 | |
| G10001-1 | COVER - PT2 ENGINE INLET PRESSURE PROBE | 1 | |
| G1002130001-001 | IASC PRESSURE CONTROL TEST HOSE | 5 | |
| G1002130001-001 | HOSE, IASC PRESSURE CONTROL TES | 5 | |
| G1002131020-001 | PRESSURIZATION TEST SAFETY NET | 1 | |
| G1002131023-001 | PRESSURIZATION TEST PANEL | 1 | |
| G1002131023-023 | PRESSURIZATION TEST PANEL | 6 | |
| G1007300001-001 | KIT - ENGINE MOTIVE FLOW PRESSURE TEST | 1 | |
| G121657 | Setra Digital Pressure Gauge | 1 | |
| G1453-22 | PIN-TOWBAR SHEAR (RADIAL AND TENSION/COMPRESSION) | 3 | |
| G15 | PRESSURE REGULATOR | 1 | |
| G15MK1 | PRESSURE REGULATOR | 1 | |
| G20MK2 | PRESSURE REGULATOR | 1 | |
| G21002-30 | TEST EQUIPMENT - PRESSURIZATION OUTFLOW VALVE ALTITUDE SIMULATION | 3 | |
| G21003 | PROBE -0 STATIC PRESSURE | 1 | |
| G21003-1 | PROBE - STATIC PRESSURE | 6 | |
| G21003-1-M | PROBE -0 STATIC PRESSURE | 1 | |
| G21003-2 | PROBE STATIC PRESSURE | 2 | |
| G21003-4 | STATIC PRESSURE PROBE | 4 | |
| G21004 | VACUUM HARNESS -0 CABIN PRESSURE CONTROLLER | 1 | |
| G21004-1 | VACUUM HARNESS - CABIN PRESSURE CONTROLLER | 10 | |
| G22705 | GAGE,PRESSURE,DIAL 0-60PSI | 1 | |
| G25004 | GAGE -0 DADO PANEL & DECOMPRESSION VENT | 1 | |
| G25004-1 | GAUGE - DADO PANEL AND DECOMPRESSION VENT | 1 | |
| G25004-2 | DADO PANEL & COMPRESSION VENT | 1 | |
| G2511L | HYDRALIC PRESSURE GUAGE 2.50 IN FACE LOWER MOUNT, GLYCERINE FILLED , 200 MAX PSI | 1 | |
| G2517L | PRESSURE GAGE | 1 | |
| G2527299304000 | PRESSURE TEST TOOL BCRC | 1 | |
| G2527299304200 | PANEL-PRESS TEST,BCRC | 1 | |
| G253065 | PRESSURE GAUGES KIT | 1 | |
| G27001-1 | USED AS A LOCK BETWEEN THE ACTUATOR AND THE SPOILER HINGE FITTING TO HOLD SPOILER OPEN AGAINST SYSTEM PRESSURE DURING MAINTENANCERIGGING. | 10 | |
| G27002-1 | USED AS A LOCK BETWEEN THE ACTUATOR AND THE SPOILER HINGE FITTING TO HOLD SPOILER OPEN AGAINST SYSTEM PRESSURE DURING MAINTENANCERIGGING. | 10 | |
| G27036-132 | PRESSURE GAUGE USED ON G27036 | 1 | |
| G28003 | TEST EQPT -0 FUEL FEED AND EPR SYSTEM PRESSURE | 1 | |
| G28003-1 | TEST EQUIPMENT - FUEL FEED AND ENGINE PRESSURE RATIO (EPR) SYSTEM PRESSURE LEAK CHECK, JT9D ENGINES | 1 | |
| G28005 | CHECK FIXTURE EQPT. PRESSURE RELIEF VALVE | 1 | |
| G28005-14 | CHECK FIXTURE EQUIPMENT - PRESSURE RELIEF VALVE | 4 | |
| G28005-18 | CHECK FIXTURE EQUIPMENT - PRESSURE RELIEF VALVE | 2 | |
| G28005-23 | CHECK FIXTURE EQUIPMENT - PRESSURE RELIEF VALVE | 3 | |
| G28005-24 | PRESSURE VACUUM TESTER | 1 | |
| G28005-29 | CHECK FIXTURE EQUIPMENT - PRESSURE RELIEF VALVE | 5 | |
| G28005-30 | CHECK FIXT . PRESSURE RELIEF VALVE | 1 | |
| G28005-35 | Check Fixture Equipment - Pressure Relief Valve | 17 | |
| G28005-4 | CHECK FIXTURE EQUIPMENT - PRESSURE RELIEF VALVE | 1 | |
| G28005-42 | Check Fixture Equipment - Pressure Relief Valve | 2 | |
| G28005-48 | CHECK FIXTURE EQUIP. PRESSURE RELIEF VALVE | 3 | |
| G28008 | TEST ADAPTER EQPT -0 FUEL LINE PRESSURE | 1 | |
| G28008-1 | TEST ADAPTER EQUIPMENT - FUEL LINE PRESSURE | 1 | |
| G28008-2 | TEST ADAPTER EQUIPMENT - FUEL LINE PRESSURE | 1 | |
| G28008-4 | Test Adapter Assy - Fuel Line Pressure | 1 | |
| G28012 | TEST EQPT -0 PRESSURE/LEAKAGE, FUEL LINES & | 1 | |
| G28012-1 | TEST EQUIPMENT - PRESSURE/LEAKAGE, FUEL LINES AND FITTINGS | 2 | |
| G28018-10 | PRESSURE HOSE ASSY | 1 | |
| G28018-10-F | PRESSURE HOSE | 1 | |
| G28018-26 | PRESSURE LEAKAGE TES | 8 | |
| G28019-18 | PRESSURE TEST DOOR | 1 | |
| G28019-20 | PRESSURE TEST DOOR | 1 | |
| G28019-20-F | PRESSURE TEST DOOR | 1 | |
| G28021 | GAGE ASSY -0 PRESSURE TEST, FUEL TANK MANIFOLD | 1 | |
| G28021-1 | GAUGE ASSEMBLY - PRESSURE TEST, FUEL TANK MANIFOLD | 4 | |
| G28027 | TEST BOX - OVERPRESSURE MONITOR CARD (OMC) | 1 | |
| G29001 | TEST ADAPTER -0 PRESSURE SWITCH, HYDRAULIC PUMP | 1 | |
| G29001-1 | TEST ADAPTER - PRESSURE SWITCH, HYDRAULIC PUMP | 1 | |
| G29001-2 | TEST ADAPTER - PRESSURE SWITCH, HYDRAULIC PUMP | 1 | |
| G29011-1 | PLUG SET - PRESSURE AND FLUSH TEST, HYDRAULIC RESERVOIR ASSEMBLY | 1 | |
| G29014-1 | RETURN & PRESSURE EXTENSION ADAPTER - GROUND SERVICE DISCONNECT | 8 | |
| G29014-3 | Pressure Adapter Assy | 1 | |
| G3-4008 BD02-L | PRESSURE GAUGE W/ HOSE | 1 | |
| G32075-16 | TEST EQUIPMENT - HYDRAULIC BRAKE SYSTEM PRESSURE C | 9 | |
| G36-P10-N01-X30 | PRESSURE GAUGE 0-150 PSI | 2 | |
| G36001 | PLUG -0 DUCT PRESSURE TEST | 1 | |
| G36001-1 | PLUG - DUCT PRESSURE TEST | 1 | |
| G36002 | PLUG -0 DUCT PRESSURE TEST | 1 | |
| G36002-1 | PLUG - DUCT PRESSURE TEST | 1 | |
| G36003 | PLUG -0 DUCT PRESSURE TEST | 1 | |
| G36003-1 | PLUG - DUCT PRESSURE TEST | 1 | |
| G36004 | PLUG -0 DUCT PRESSURE TEST | 1 | |
| G36004-1 | PLUG - DUCT PRESSURE TEST | 1 | |
| G36005 | PLUG -0 DUCT PRESSURE TEST | 1 | |
| G36005-1 | PLUG - DUCT PRESSURE TEST | 1 | |
| G36009 | PLUG EQUIPMENT -0 DUCT/TUBE PRESSURE TEST | 1 | |
| G36009-1 | PLUG EQUIPMENT - DUCT/TUBE PRESSURE TEST | 1 | |
| G36009-2 | PLUG EQUIPMENT - DUCT/TUBE PRESSURE TEST | 1 | |
| G36009-3 | PLUG EQUIPMENT - DUCT/TUBE PRESSURE TEST | 1 | |
| G36010 | PLUG EQUIPMENT -0 DUCT PRESSURE TEST (65B90147 | 1 | |
| G36010-1 | PLUG EQUIPMENT - DUCT PRESSURE TEST (65B90147 DUCT) | 1 | |
| G36011 | PLUG EQUIPMENT -0 PRESSURE TEST, 69B89711 | 1 | |
| G36011-1 | PLUG EQUIPMENT - PRESSURE TEST, 69B89711 FLANGED DUCTS | 1 | |
| G36017 | PLUG EQPT -0 PRESSURE TEST | 1 | |
| G36017-1 | PLUG EQUIPMENT - PRESSURE TEST | 1 | |
| G36019 | PLUG -0 DUCT PRESSURE TEST (DUCTS WITH 65B94822 | 1 | |
| G36019-1 | PLUG - DUCT PRESSURE TEST (DUCTS WITH 65B94822 FITTINGS) | 1 | |
| G36022 | PLUG EQUIPMENT -0 DUCT PRESSURE TEST (65B94541 | 1 | |
| G36022-1 | PLUG EQUIPMENT - DUCT PRESSURE TEST (65B94541 DUCT) | 1 | |
| G36031 | PRESSURE TEST EQPT -0 DUCT ASSY | 1 | |
| G36031-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| G36032 | PRESSURE TEST EQPT -0 DUCT ASSY | 1 | |
| G36032-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| G36033-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| G36034 | PRESSURE TEST EQPT -0 DUCT ASSY | 1 | |
| G36034-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| G36035-113 | PRESSURE GAUGE | 1 | |
| G36035-45 | Pressure regulator | 1 | |
| G36035-49 | Pressure gauge | 1 | |
| G36035-50 | Pressure gauge | 1 | |
| G36035-51 | Pressure gauge | 1 | |
| G36035-52 | Pressure gauge | 1 | |
| G36037 | PLUG EQPT -0 DUCT, PROOF PRESSURE TEST | 1 | |
| G36037-1 | PLUG EQUIPMENT - DUCT, PROOF PRESSURE TEST | 1 | |
| G36038 | PLUG EQPT -0 DUCT, PROOF PRESSURE TEST | 1 | |
| G36038-1 | PLUG EQUIPMENT - DUCT, PROOF PRESSURE TEST | 1 | |
| G36040 | PLUG EQPT -0 DUCT, PROOF PRESSURE TEST | 1 | |
| G36040-1 | PLUG EQUIPMENT - DUCT, PROOF PRESSURE TEST | 1 | |
| G36041 | PLUG -0 DUCT, PROOF PRESSURE TEST | 1 | |
| G36041-1 | PLUG - DUCT, PROOF PRESSURE TEST | 1 | |
| G36042 | PLUG EQPT -0 DUCT, PROOF PRESSURE TEST | 1 | |
| G36042-1 | PLUG EQUIPMENT - DUCT, PROOF PRESSURE TEST | 1 | |
| G36047-1 | BLANKING PLATE - LEAK TEST, PRESSURE COMPENSATOR DUCT | 2 | |
| G36048-1 | TEST BOX - PRESSURE REGULATING AND SHUTOFF VALVE (PRSOV), PRESSURE LEAK TEST | 3 | |
| G36049-1 | TEST BOX - PRESSURE REGULATING SHUT-OFF VALVE (PRSOV), BATTERY OPERATED PRESSURE LEAK TEST | 2 | |
| G38004-10 | PRESSURE GAUGE | 15 | |
| G38004-11 | PRESSURE GAUGE | 1 | |
| G38004-17 | PRESSURE GAUGE | 7 | |
| G38006-10 | PRESSURE REGULATOR BOX | 1 | |
| G38006-26 | Pressure Regulator | 1 | |
| G38006-28 | Dry Pressure Gauge | 1 | |
| G38006-3 | PRESSURE REGULATOR | 1 | |
| G38006-3-F | PRESSURE REGULATOR | 1 | |
| G4308 | GAGE, PRESSURE, DIAL INDICATING:0-2000 PSI | 1 | |
| G47001 | TEST EQUIPMENT -0 LEAK AND PRESSURE, NGS | 1 | |
| G47001-17 | Test Equipment - Leak & Pressure Nitrogen Gen Sys | 1 | |
| G47001-19 | Test Equipment - Leak and Pressure, Nitrogen Generation System | 10 | |
| G47001-20 | TEST EQUIPMENT - LEAK AND PRESSURE, NITROGEN GENERATION SYSTEM | 3 | |
| G47001-34 | Pressure gauge | 1 | |
| G47001-7 | TEST EQPT-LEAK & PRESSURE | 1 | |
| G52015-1 | TEST LATCH PRESS DOO | 2 | |
| G52015-12 | TEST LATCH PRESS DOO | 10 | |
| G52015-17 | TEST LATCH PRESS DOO | 4 | |
| G53001 | SCAFFOLD EQUIPMENT -0 PRESSURE BULKHEAD ACCESS | 1 | |
| G53001-103 | SCAFFOLD EQUIPMENT - PRESSURE BULKHEAD ACCESS | 1 | |
| G53001-104 | SCAFFOLD EQUIPMENT - PRESSURE BULKHEAD ACCESS | 2 | |
| G53001-134 | SCAFFOLD EQUIPMENT - PRESSURE BULKHEAD ACCESS | 4 | |
| G53001-141 | SCAFFOLD EQUIPMENT - PRESSURE BULKHEAD ACCESS | 1 | |
| G53001-230 | SCAFFOLD EQUIPMENT - PRESSURE BULKHEAD ACCESS | 3 | |
| G53001-34 | SCAFFOLD EQUIPMENT - PRESSURE BULKHEAD ACCESS | 1 | |
| G54004-36 | BEARING, PRESSURIZED, DRIVE | 9 | |
| G54015-1 | BEARING, PRESSURIZED, DRIVEN | 3 | |
| G600-100033-15 | PROTECTOR STATIC PRESSURE SENSOR | 1 | |
| G600-210002-25 | PRESSURE CAP ADAPTER PLATE | 1 | |
| G600-210004-197 | KIT, PNEUMATIC, PRESSURE TEST | 2 | |
| G600-210004-219 | KIT PNEUMATIC PRESSURE TEST | 2 | |
| G600-210004-221 | Kit - Pneumatic Pressure Test (115 V/60 Hz) | 2 | |
| G600-210004-225 | MATERIAL DESCRIPTION KIT, PNEUMATIC PRESSURE TEST 220V-50HZ | 1 | |
| G600-210004-227 | Kit - Pneumatic Pressure Test (220/240 V/50 Hz) | 2 | |
| G600-210004-227-REVG | KIT - PNEUMATIC PRESSURE TEST (220/240 V/50 HZ) | 1 | |
| G600-210006-1 | KIT WATER SEPARATER PRESSUZIRATION | 1 | |
| G600-210007-227 | KIT, PNEUMATIC PRESSURE TEST 220V/50HZ | 1 | |
| G600-280020-21 | Adapter Vent Valve Pressurization | 1 | |
| G600-280022-1 | Kit - Tank Pressurization | 1 | |
| G600-320024-145 | KIT - BRAKE PRESSURE TEST UNIT | 3 | |
| G600-320026-123 | FIXTURE BRAKE PEDAL PRESSURE TEST | 3 | |
| G600-320053-1 | TOOL BRAKE PISTON COMPRESSION | 1 | |
| G600-324006-1 | DIGITAL PRESSURE GAUGE | 2 | |
| G600−210004−197 | KIT - PNEUMATIC PRESSURE TEST (220/240 V/50 HZ) | 2 | |
| G600−210004−221 | KIT − PNEUMATIC PRESSURE TEST (115 V/60 HZ) | 2 | |
| G600−210004−227 | Kit − Pneumatic Pressure Test (220/240 V/50Hz) | 2 | |
| G600−210006−1 | Kit − Water Separator Pressurization | 1 | |
| G600−280020−21 | Adapter − Vent Valve Pressurization | 1 | |
| G600−280022−1 | Kit − Tank Pressurization | 1 | |
| G600−320026−123 | FIXTURE − BRAKE PEDAL PRESSURE TEST | 3 | |
| G601-210003-1 | PRESS CAP ADAPTER | 1 | |
| G601-210004-221 | KIT-PNEUMATIC PRESSURE TEST | 1 | |
| G601-210007 201 | KIT - PNEUMATIC PRESSURE TEST ALTITUDE L | 3 | |
| G601-210007-1 | Kit - Pneumatic Pressure Test Altitude Limiter (Outflow Valve) | 1 | |
| G601-210007-145 | Kit - Pneumatic Pressure Test Altitude Limiter (Outflow Valve) (220V/50Hz) | 1 | |
| G601-210007-199 | Kit - Pneumatic Pressure Test Altitude Limiter (Outflow Valve) (115V/60Hz) | 2 | |
| G601-210007-201 | Kit - Pneumatic Pressure Test Altitude Limiter (Outflow Valve) (220V/50Hz) | 3 | |
| G601-210007-201-REVG | KIT - PNEUMATIC PRESSURE TEST ALTITUDE LIMITER (OUTFLOW VALVE) (220V/50HZ) | 1 | |
| G601-210007-203 | KIT - PNEUMATIC PRESSURE TEST ALTITUDE LIMITER | 1 | |
| G601-210007-3 | Kit - Pneumatic Pressure Test Altitude Limiter (Outflow Valve) | 1 | |
| G601-210007???201 | KIT - PNEUMATIC PRESSURE TEST ALTITUDE LIMITER OU | 3 | |
| G601-210007−199 | KIT - PNEUMATIC PRESSURE TEST ALTITUDE LIMITER(OUTFLOW VALVE) (115V/60HZ) | 2 | |
| G601-210007−201 | KIT - PNEUMATIC PRESSURE TEST ALTITUDE LIMITER (OUTFLOW VALVE) (220V/50HZ) | 3 | |
| G601-280008-41 | Kit - Pressurized Fuel Handling | 1 | |
| G601-280008−41 | KIT - PRESSURIZED FUEL HANDLING | 1 | |
| G601-280020-1 | Shroud Pressurization Assembly | 3 | |
| G601-280020−1 | SHROUD PRESSURIZATION ASSEMBLY | 3 | |
| G601-282006-1 | PRESSURIZATION PLUG | 1 | |
| G601-780007-3 | THRUST REVERSER PRESSURE ADAPTER | 1 | |
| G601R21109-1 | GAS SPRING COMPRESSION TOOL | 1 | |
| G601R275301-101 | Flex Shaft Pressure Test Tool | 2 | |
| G601R275301−101 | Flex Shaft Pressure test Tool | 2 | |
| G601R324302-1 | KIT - BRAKE PRESSURE TEST | 3 | |
| G601R324302−1 | Kit − Brake Pressure Test | 3 | |
| G601R324303-1 | FIXTURE - BRAKE-PEDAL PRESSURE TEST | 1 | |
| G601R324303−1 | Fixture − Brake Pedal Pressure Test | 1 | |
| G601R521103-1 | COMPRESSION TOOL - GAS SPRING | 5 | |
| G601R521109-1 | COMPRESSION TOOL - GAS SPRING | 9 | |
| G601R521109−1 | Compression Tool − Gas Spring | 9 | |
| G601−210007−1 | Kit − Pneumatic Pressure Test Altitude Limiter (Outflow Valve) | 1 | |
| G601−210007−145 | Kit − Pneumatic Pressure Test Altitude Limiter(Outflow Valve) (220V/50Hz) | 1 | |
| G601−210007−199 | Kit − Pneumatic Pressure Test Altitude Limiter(Outflow Valve) (115V/60Hz) | 2 | |
| G601−210007−201 | KIT − PNEUMATIC PRESSURE TEST ALTITUDE LIMITER (OUTFLOW VALVE) (220V/50HZ) | 3 | |
| G601−210007−3 | Kit − Pneumatic Pressure Test Altitude Limiter (Outflow Valve) | 1 | |
| G601−280008−41 | Kit − Pressurized Fuel Handling | 1 | |
| G601−280020−1 | SHROUD PRESSURIZATION ASSEMBLY | 3 | |
| G604-213101-1 | TEST - CABIN PRESSURE LEAK TEST | 4 | |
| G604-213101-1 | CABIN PRESSURE LEAK TEST SET | 4 | |
| G604-352001-1 | PRESSURE FLOW TESTER - PASS. OXYGEN TESTER | 1 | |
| G604-352001-27 | TESTER, OXYGEN PRESS / FLOW | 2 | |
| G604−213101−1 | Kit − Cabin Pressure Leak Test | 4 | |
| G604−352001−1 | Pressure Tester − Passenger Oxygen Station | 1 | |
| G610-280008-41 | PRESSURIZED DEFUEL KIT | 1 | |
| G63-060BG | GAUGE , LOW PRESSURE FOR(SASK1807) | 1 | |
| G670-271401-1 | GENERATOR, PCU DIFFERENTIAL PRESSURE | 6 | |
| G670-3212001-101 | Hydraulic In Line Pressure Regulator | 1 | |
| G670271401-1 | GENERATOR - PCU DIFFERENTIAL PRESSURE | 6 | |
| G670271401−1 | Generator − PCU Differential Pressure Aileron/ Elevator | 6 | |
| G670324001-1 | KIT BRAKE PRESSURE TEST - ADJUSTING & SERVICING | 2 | |
| G670324001???1 | PRESSURE TEST KIT ??? BRAKE DUAL UNIT | 2 | |
| G670324001−1 | Pressure Test Kit − Brake (Dual Unit) | 2 | |
| G670−3212001−101 | Hydraulic − In−line Pressure Regulator | 1 | |
| G700-210004-1 | Panel Assembly - Fuselage Pressurization Leak Check | 1 | |
| G700-210004-39 | Panel Assembly - Fuselage Pressurization Leak Check | 2 | |
| G700-210004−39 | KIT - FUSELAGE PRESSURIZATION AND LEAK CHECK | 2 | |
| G700-210005-1 | Safety Net - Fuselage Pressurization/Leak Check | 2 | |
| G700-210005−1 | SAFETY NET - FUSELAGE PRESSURIZATION/LEAK CHECK | 2 | |
| G700-213101-1 | Harness - Cabin Pressure Controller | 1 | |
| G700-281301-1 | FUEL PRESSURE TEST KIT | 2 | |
| G700-281301-129 | KIT - FUEL PRESSURE TEST | 1 | |
| G700-281301−1 | KIT - FUEL PRESSURE TEST | 2 | |
| G700-281302 1 | KIT - FUEL PRESSURE TEST PLUGS | 2 | |
| G700-281302-1 | KIT - FUEL PRESSURE TEST PLUGS | 2 | |
| G700-281302−1 | KIT - FUEL PRESSURE TEST PLUGS | 2 | |
| G700-350001 | Oxygen Pressure Test Gauge | 1 | |
| G700-350001-1 | KIT, GAUGE, OXYGEN BOTTLE PRESSURE CHECK | 4 | |
| G700-350001−1 | KIT, GAUGE, BOTTLE PRESSURE CHECK | 4 | |
| G700???350001???1 | KIT ??? 02 BOTTLE PRESSURE CHECK | 4 | |
| G700−210004−1 | KIT - FUSELAGE PRESSURIZATION AND LEAK CHECK | 1 | |
| G700−210004−39 | KIT - FUSELAGE PRESSURIZATION AND LEAK CHECK | 2 | |
| G700−210005−1 | SAFETY NET - FUSELAGE PRESSURIZATION/LEAK CHECK | 2 | |
| G700−281301−1 | KIT - FUEL PRESSURE TEST | 2 | |
| G700−281301−129 | KIT - FUEL PRESSURE TEST | 1 | |
| G700−281302−1 | KIT − FUEL PRESSURE TEST PLUGS | 2 | |
| G700−350001−1 | KIT − 02 BOTTLE PRESSURE CHECK | 4 | |
| G71012-121 | PRV & PRESSURE SENSOR | 1 | |
| G71012-121-M | PRV & PRESSURE SENSOR | 1 | |
| G71021-16 | DRIVE EXTENSION - STARTER VALVE AND PRESSURE REGULATING AND SHUTOFF VALVE | 15 | |
| G77002-1 | ADAPTER - Pt2 PROBE, ENGINE PRESSURE RATIO (EPR) SYSTEM LEAK TEST | 1 | |
| GA 45 FF AVEC | COMPRESSEUR D'AIR 45 VSC SÉCHEUR INTÉGRÉ | 1 | |
| GA-288 | PRESSURE GAUGE (0-160 PSI) | 1 | |
| GA246 | GAGE, TIRE PRESSURE | 1 | |
| GA2500 | HIGH PRESSURE FUEL GAS REGULATOR | 1 | |
| GA4756 -110-A | PRESSURE GAUGE ASSY 0-870 PSI | 1 | |
| GA4756 -130-A | PRESSURE GAUGE ASSY 0-3625 PSI | 1 | |
| GA4756 -140-A | PRESSURE GAUGE ASSY 0-365 PSI | 1 | |
| GA4756 -150-A | PRESSURE GAUGE ASSY 0-5800 PSI | 1 | |
| GA4756 -170-A | PRESSURE GAUGE ASSY 0-2325 PSI | 1 | |
| GA47567-110-A | GAGE, PRESSURE, DIAL INDICATING | 1 | |
| GA47567-140-A | GAGE PRESSURE INDICATING | 1 | |
| GA47567-140A | GAGE PRESSURE INDICATING | 1 | |
| GA47567-170-A | MANOMETER 0-160 BAR PRESSURE GAUGE 0-2325 PSI | 1 | |
| GA75-241 | PRESSURE GAGE 0-60 PSIG (1) CL0.75 | 1 | |
| GAG-0007W | GAUGE, PRESSURE, 2-1/2" FACE INDICATOR, 0-600 PSI | 1 | |
| GAGE 0-160 PSI | PRESSURE GAGE 0-160 PSI | 1 | |
| GAGE 150 BAR (2175 PSI) | PRESSURE, HYDRAULIC | 1 | |
| GAI26069-100 | TRAILER COMPRESSED GAS | 1 | |
| GALPDRM025X0-160 | GAUGE PRESSURE 160PSI | 1 | |
| GAUGE 0-1000 PSI | PRESSURE GAUGE 1-1000 PSI | 1 | |
| GAUGE 0-4000 PSI | PRESSURE GAGE 0-4000 PSI | 2 | |
| GAUGE0-125T0N | GAUGE PRESSURE | 1 | |
| GAUGE0-125TON | GAUGE PRESSURE | 1 | |
| GAUGE0-160PSI | GAUGE PRESSURE | 1 | |
| GAUGE0-300PSI | TYRE PRESSURE GAUGE | 1 | |
| GAUGE0-30PSI | GAUGE PRESSURE | 1 | |
| GAUGE0-30T0N | GAUGE PRESSURE | 1 | |
| GAUGE0-30TON | GAUGE PRESSURE | 1 | |
| GAUGE0-400BAR | GAUGE PRESSURE | 1 | |
| GAUGE0-40T0N5-1-2RA | GAUGE PRESSURE JACK | 1 | |
| GAUGE0-40TON5-1-2AR | GAUGE PRESSURE JACK | 1 | |
| GAUGE0-510BAR | GAUGE PRESSURE 0-510 BAR | 1 | |
| GAUGE0-6000PSI | GAUGE PRESSURE | 1 | |
| GAUGECALHP | GAUGECALXP- PRESSURE COMPARATOR (CAL) | 1 | |
| GAUGECALXP | GAUGECALXP- PRESSURE COMPARATOR | 1 | |
| GAUGEP10 | 65MM DIA 0-100PSI 1/4NPT PRESSURE GAUGE | 1 | |
| GA_*200PSI-CL0.5 | PRESSURE GAGE 200 PSI CL-0.5 | 1 | |
| GB25-300-BM-N | GAUGE;LOW PRESSURE | 1 | |
| GB25-6K-BM-N | GAUGE, PRESSURE 1/4 IN NPT FITTING - MFG: LENZ COMPANY - P/N# GB25-6K-BM-N | 1 | |
| GB802-328-000 | MANOMETER, GAUGE, PRESSURE | 1 | |
| GB802-343-020 | PRESSURE GAUGE OF NITROGEN TROLLEY (0-16 BAR) | 1 | |
| GB802-530-100 | PRESSURE GAUGE OF NITROGEN TROLLEY (0-100BAR) | 1 | |
| GB802-722-000 | PRESSURE GAUGE OF NITROGEN TROLLEY (0-315 BAR) | 1 | |
| GB808-022-000 | AIR PRESSURE CONTROL | 1 | |
| GC1899 | TESTER, PRESSURE GUAGE | 1 | |
| GC915-24 | PRESSURE TEST ADAPTOR | 1 | |
| GC916-16 | PRESSURE TEST ADAPTOR | 1 | |
| GCOMPT004 | COMPRESSION TESTER | 1 | |
| GD4200-USD | USB PRESSURE TRANSDUCER | 1 | |
| GD720B332G | PRESSURE REGULATOR | 1 | |
| GE DRUCK DPI 603 | PORTABLE PRESSURE CALIBRATOR | 1 | |
| GE-CFMI-628 | MOLDED IMPRESSION INSPECTION KIT | 1 | |
| GE0013 | TYRE PRESSURE GAUGE | 1 | |
| GF-10P | PRESSURE GAUGE (0-1000) PSI | 1 | |
| GF-10S | PRESSURE GAUGE (ENERPAC) | 1 | |
| GF-95-00 | Tool for Pressure Switch | 1 | |
| GF120P | PRESS GAUGE (HYD) | 1 | |
| GG0281008-0001 | WING FUEL PRESSURE TEST ACCESS PANEL | 1 | |
| GG670-80001-3 | HIGH PRESSURE BLEED VALVE | 2 | |
| GG670-80001-3 | VALVE, HIGH PRESSURE S/O | 2 | |
| GHOTT/5300 | HYDROBLASTER PRESSURE WASHER | 1 | |
| GI-23413-1 | TRANSFER TUBE SEAL COMPRESSOR | 1 | |
| GLD15MK1 | LOW PRESSURE CONTROLLER | 1 | |
| GLORIA 142T SPEZIAL | PRESSURE SPRAYER | 1 | |
| GLP15MK1 | HIGH PRESSURE CONTROLLER | 1 | |
| GMI25-001 | PRESSURE DRAIN TOOL(COFFEE MACHINE) | 1 | |
| GMIOTPVV | VENTURI-COMPRESSED AIR PUMP | 1 | |
| GMM63-40 | PRESSURE GAUGE | 2 | |
| GN6848 | COMPRESSOR TEXAS, 7.5HP/500LTR, 8BAR | 1 | |
| GP-10S | PRESSURE GAUGE_0-10,000 PSI,(100),±1% OF F.S_[GP-10S] | 4 | |
| GP10S | GAGE, HYDRAULIC PRESSURE | 4 | |
| GP111-68001-715 | PRESSURE GENERATOR | 1 | |
| GP15-38-1 | GAUGE AIR PRESSURE | 1 | |
| GP75-47 | TIRE PRESSURE GAUGE | 1 | |
| GP90150A | COMPRESSOR(P/GAGES) | 1 | |
| GR000067 | DRIVE BLOCK PRESSING-IN TOOL | 1 | |
| GS 23420-1 | BLADE SEAL COMPRESSOR | 17 | |
| GS 23435-1 | HUB PRESSURIZER | 16 | |
| GS10295 | TUBE ASSY-PRESSURE PICKUP | 1 | |
| GS10476 | COMPRESSIN | 1 | |
| GS10757 | OIL PRESSURE RELIEF VALVE FIXTURE | 1 | |
| GS10765 | CAP PRESSURE TEST | 1 | |
| GS10765-100 | CAP PRESSURE TEST | 1 | |
| GS10877 | FIXTURE PRESSURE TEST | 1 | |
| GS11327 | COMPRESSOR VALVE | 1 | |
| GS11346 | COMPRESSOR BEARING RING | 1 | |
| GS11839-1 | ADAPTER PRESSURE PICK-UP | 1 | |
| GS11925-1 | HIGH PRESSURE RELIEF VALVE WRENCH | 1 | |
| GS12987 | PRESSURE PLATE | 1 | |
| GS13050-1 | FIXTURE, SEAL COMPRESSING | 1 | |
| GS132 | CAP PRESSURE TEST HEAT EXCHANGER | 1 | |
| GS13238-1 | PLUG - TEST, ACM FLOW CONTROL VALVE SIGNAL PRESSURE TEST PORT G2 | 2 | |
| GS13264-4 | CAP - PRESSURE TEST, HEAT EXCHANGER (ELECTRONIC PRESSURE CONTROL ONLY) | 5 | |
| GS13381 | FIXTURE SEAL COMPRESSI | 1 | |
| GS13450 | FIXTURE COMPRESSION IN | 1 | |
| GS13567-1 | ADAPTER ARBOR PRESS | 1 | |
| GS13797-1 | FIXTURE COMPRESSOR HSG | 2 | |
| GS13798-1 | PLATE PRESSURE TEST | 2 | |
| GS13806-1 | TEST CAP, PRESSU | 1 | |
| GS13934-1 | FIXTURE COMPRESSION | 1 | |
| GS13963-1 | VACUUM TANK - PRESSURE RELIEF VALVE TESTER | 5 | |
| GS14019-1 | DEPRESSOR-SPRIN | 1 | |
| GS14061-1 | Pressure Test Cap | 2 | |
| GS14068-1 | PULLER, COMPRESS | 1 | |
| GS14071-1 | Pressure Test Cap | 1 | |
| GS14072-1 | CAP, PRESSURE TEST | 2 | |
| GS14074-1 | Pressure Test Cap | 1 | |
| GS14095-1 | PRESSURE TEST CAP | 1 | |
| GS14202-1 | FIXTURE, PRESS | 1 | |
| GS14204-1 | PLATE PRESSURE TEST | 1 | |
| GS14550-1 | COMPRESSOR-SPRING ASSY | 2 | |
| GS14879-20 | CAP - PRESSURE TEST | 1 | |
| GS14879-24 | CAP - PRESSURE TEST | 1 | |
| GS14879-28 | CAP - PRESSURE TEST | 1 | |
| GS14879-32 | CAP - PRESSURE TEST | 1 | |
| GS14879-36 | CAP - PRESSURE TEST | 1 | |
| GS14879-40 | CAP - PRESSURE TEST | 1 | |
| GS14879-44 | CAP - PRESSURE TEST | 1 | |
| GS14879-48 | CAP - PRESSURE TEST | 1 | |
| GS14879-56 | CAP - PRESSURE TEST | 1 | |
| GS14879-64 | CAP - PRESSURE TEST | 1 | |
| GS14879-88 | CAP - PRESSURE TEST | 1 | |
| GS14879-89 | CAP - PRESSURE TEST | 1 | |
| GS14892-2 | CAP PRESSURE TEST | 1 | |
| GS14922-1 | SPACER, COMPRESSOR ROTOR | 1 | |
| GS14925-1 | CAP, PRESSURE TEST | 1 | |
| GS14964-1 | CAP, PRESSURE TEST | 1 | |
| GS15047 | PRESSURE GAUGE 0-30 INHG | 1 | |
| GS15047-1 | PRESSURE RELEIF VALVE TESTER | 13 | |
| GS15151-1 | CAP ASSY, PRESSURE TEST | 1 | |
| GS15152-1 | PRESSURE TEST CAP | 1 | |
| GS15152-2 | PRESSURE TEST CAP | 1 | |
| GS15165-1 | Arbor Set,Compressor | 2 | |
| GS15378-1 | INSTALLER PRESSURE PROBE | 1 | |
| GS15384-1 | PRESSURE TEST CAP | 1 | |
| GS15465-1 | UBE ASSY SERVO PRESSURE | 1 | |
| GS15538-1 | PRESSURE, TEST CAP | 1 | |
| GS15539-1 | CAP, PRESSURE TEST | 1 | |
| GS15540-1 | PRESSURE, TEST CAP | 1 | |
| GS15540-2 | PRESSURE, TEST CAP | 1 | |
| GS15541-1 | CAP, PRESSURE TEST | 2 | |
| GS15541-2 | PRESSURE, TEST CAP | 3 | |
| GS15541-3 | PRESSURE, TEST CAP | 1 | |
| GS15541-4 | PRESSURE, TEST CAP | 1 | |
| GS15545-1 | PRESSURE TEST CAP | 1 | |
| GS15553-1 | TURBINE COMPRESSOR SPACER | 1 | |
| GS15565-1 | PRESSURE TEST PLUG | 1 | |
| GS15565-2 | PRESSURE TEST PLUG | 1 | |
| GS15565-3 | PRESSURE TEST CAP | 1 | |
| GS15565-4 | PLUG, PRESSURE TEST | 1 | |
| GS15586-1 | PRESSURE PLATE | 1 | |
| GS15623-1 | SPACER, COMPRESSOR ROTOR | 1 | |
| GS15635-1 | CAP, PRESSURE TEST | 1 | |
| GS15672-1 | COMPRESSOR, SEAL | 1 | |
| GS15675-1 | COMPRESSOR, SEAL | 1 | |
| GS15678-1 | COMPRESSOR SEAL | 1 | |
| GS15681-1 | SHIMMING FIX. HIGH PRESSURE VALVE | 1 | |
| GS15747-1 | COMPRESSOR SEAL | 1 | |
| GS15748-1 | COMPRESSOR SEAL | 1 | |
| GS15749-1 | COMPRESSOR SEAL | 1 | |
| GS15766-1 | SPRING COMPRESSOR | 1 | |
| GS15768-1 | FIXTURE – 0 RING COMPRESSOR | 1 | |
| GS16186-1 | COMPRESSOR SEAL | 1 | |
| GS16188-1 | COMPRESSOR SEAL | 1 | |
| GS180 | AIR START, TURBINE COMPRESSOR - CART | 1 | |
| GS18117 | HOSE ASSY LOW PRESSURE | 1 | |
| GS18117-4A | LOW PRESSURE HOSE ASSEMBLY | 1 | |
| GS18255 | PRESSURE REGULATOR - FLUID TRANSFER SLEEVE TESTING | 1 | |
| GS19468-1 | FIXTURE, SEAL COMPRESSION | 1 | |
| GS19548-1 | CAP, PRESSURE TEST | 1 | |
| GS19549-1 | PRESSURE TEST CAP | 1 | |
| GS19616-1 | CAP, PRESSURE TEST | 5 | |
| GS19617-1 | CAP, PRESSURE TEST | 3 | |
| GS19617-2 | CAP, PRESSURE TEST | 2 | |
| GS19617-3 | CAP, PRESSURE TEST | 2 | |
| GS19620-1 | CAP, PRESSURE TEST | 1 | |
| GS19660-1 | PLATE, PRESSURE TEST | 1 | |
| GS19758-1 | PLATE, PRESSURE TEST | 1 | |
| GS19809-1 | CAP, PRESSURE TEST | 3 | |
| GS19840-1 | SEAL COMPRESSOR | 1 | |
| GS19845-1 | ADAPTOR, PRESS PISTON & SLEEVE | 1 | |
| GS19860-1 | COMPRESSOR, SEAL | 1 | |
| GS19861-1 | COMPRESSOR, SEAL | 1 | |
| GS19862-1 | COMPRESSOR, SEAL | 1 | |
| GS19863-1 | COMPRESSOR, SEAL | 1 | |
| GS19864-1 | COMPRESSOR, SEAL | 1 | |
| GS19865-1 | COMPRESSOR, SEAL | 1 | |
| GS20054-1 | AIR BEARING ACM COMPRESSOR | 2 | |
| GS20073-1 | Compressor Rotor Puller | 2 | |
| GS20082-1 | PRESSURE TEST CAP | 3 | |
| GS20108-1 | CAP, PRESSURE TEST | 3 | |
| GS20109-1 | PRESSURE CAP | 1 | |
| GS20136-1 | CAP ASSY, PRESSURE TEST | 1 | |
| GS20137-1 | CAP ASSY, PRESSURE TEST | 1 | |
| GS20138-1 | CAP ASSY, PRESSURE TEST | 1 | |
| GS20140-1 | CAP, PRESSURE TEST | 1 | |
| GS20145-1 | CAP ASSY, PRESSURE TEST | 1 | |
| GS20183-1 | PRESS BEARING | 1 | |
| GS20190-1 | SEAL ASSY PRESS | 3 | |
| GS20248-1 | COMPRESSOR, SEAL PC SERVO | 1 | |
| GS20250-1 | COMPRESSOR, SEAL PC SERVO | 1 | |
| GS20252-1 | COMPRESSOR, SEAL P/L VALVE | 1 | |
| GS20254-1 | COMPRESSOR, SEAL P/L VALVE | 1 | |
| GS20292-1 | COMPRESSOR SEAL JFC68-10 | 1 | |
| GS20382-1 | PRESS BEARING | 1 | |
| GS20388 | KIT, BEARING PRESS | 1 | |
| GS20388-1 | KIT, BEARING PRESS | 1 | |
| GS20388-2 | KIT, BEARING PRESS | 1 | |
| GS20406-1 | BLADE PIN PRESS | 2 | |
| GS204821 | HUB PRESSURISER | 1 | |
| GS20540-1 | CAP, PRESSURE TEST | 1 | |
| GS20652-1 | CAP ASSY, PRESSURE TEST | 1 | |
| GS20653-1 | CAP ASSY, PRESSURE TEST | 1 | |
| GS20686-1 | SEAL PRESS. | 2 | |
| GS20706-1 | COMPRESSOR, SEAL COVER PLATE | 1 | |
| GS20722-1 | FIXTURE, PRESSURE TEST | 1 | |
| GS20725-1 | COMPRESSOR, SEAL | 1 | |
| GS20773-1 | PRESS ASSEMBLY | 1 | |
| GS20778-1 | COMPRESSOR, PISTON | 1 | |
| GS20791-1 | PRESSURE, TEST CAP | 2 | |
| GS20836-1 | INLET ADAPTER ASSY(HIGH PRESSURE) | 1 | |
| GS20839-1 | PIN PRESS | 1 | |
| GS2084-1 | BARREL PRESSURIZER | 1 | |
| GS20840-8 | ATR PROP HUB PRESSURE TOOL | 1 | |
| GS20842-1 | Hub Pressurizer | 14 | |
| GS20842-1-ST | ADAPTER FOR BARREL PRESSURIZER | 1 | |
| GS20849-1 | PRESS. WEAR PLATE | 1 | |
| GS20869-1 | SEAL PRESS | 3 | |
| GS20872-1 | PROP MOUNTING BOLT PRESS | 2 | |
| GS20873 | PROP MOUNTING BOLT PRESS | 1 | |
| GS20873-1 | PROP MOUNTING BOLT PRESS | 4 | |
| GS20882-1 | AIR BAG PRESSURE | 2 | |
| GS20891-1 | SEAL COMPRESSOR, PRV SLEEVE | 2 | |
| GS20891-1 | Seal Compressor | 2 | |
| GS20900-1 | SEAL COMPRESSOR MV SPOOL | 2 | |
| GS20907-1 | SEAL COMPRESSOR | 2 | |
| GS20909-1 | SEAL COMPRESSOR | 2 | |
| GS20911-1 | SEAL COMPRESSOR SEQ VALVE | 2 | |
| GS20915-1 | SEAL COMPRESSOR VALVE PR | 2 | |
| GS20922-1 | SEAL COMPRESSOR WM BPY PISTON | 2 | |
| GS20930-1 | TORQUE ADAPTOR, PRESS SWITCHES | 2 | |
| GS20935-1 | SEAL COMPRESSOR, MVPV SLEEVE | 2 | |
| GS20938-1 | SEAL COMPRESSOR AO & SVA OV | 2 | |
| GS20941-1 | SEAL COMPRESSOR OIR VALVE SLEEVE | 1 | |
| GS20941-1 r | Seal Compresso | 1 | |
| GS20944-1 | SEAL COMPRESSOR OG VALVE | 2 | |
| GS20973-1 | MOUNTING BOLT PRESS | 1 | |
| GS20985-1 | CAP, PRESSURE TEST | 2 | |
| GS21131-1 | SEAL COMPRESSOR MV SLEEVE | 1 | |
| GS21131-1 MV | Seal Compressor | 1 | |
| GS21261-1 | COMPRESSOR, SEAL | 1 | |
| GS21268-1 | COMPRESSOR OUT-TURBINE IN TESTING DUCT | 1 | |
| GS21372-1 | CAP, PRESSURE TEST | 1 | |
| GS21375-1 | CAP, PRESSURE, ASSY. | 1 | |
| GS21383-1 | PRESSURE TEST ASSEMBLY | 1 | |
| GS21411-1 | PRESSURE TEST ASSY | 1 | |
| GS21443-1 | COMPRESSOR, SEAL | 1 | |
| GS21455-1 | SEAL COMPRESSOR | 1 | |
| GS21458-1 | SEAL COMPRESSOR | 1 | |
| GS21469-1 | COMPRESSOR, SEAL | 1 | |
| GS21499-1 | SEAL COMPRESSOR | 1 | |
| GS21569-1 | VALVE SEAL COMPRESSOR | 1 | |
| GS21576-1 | SPRING COMPRESSOR | 1 | |
| GS21580-1 | SEAL COMPRESSOR | 1 | |
| GS21584-1 | SEAL COMPRESSOR | 1 | |
| GS21597-1 | COMPRESSOR, PISTON SEAL | 1 | |
| GS21615-1 | FIXTURE, TEST, PRESS. RELIEF VALVE | 1 | |
| GS21667-1 | COMPRESSOR, SEAL | 1 | |
| GS21669-1 | COMPRESSOR, SEAL | 1 | |
| GS21670-1 | COMPRESSOR, SEAL | 1 | |
| GS21671-1 | COMPRESSOR, SEAL | 1 | |
| GS21672-1 | COMPRESSOR, SEAL | 1 | |
| GS21673-1 | COMPRESSOR, SEAL | 1 | |
| GS21760-1 | COMPRESSOR, SEAL | 1 | |
| GS21764-1 | SEAL COMPRESSOR | 1 | |
| GS21903-1 | PROOF PRESSURE TEST KIT | 1 | |
| GS21903-4 | KIT PROFF PRESS TEST | 1 | |
| GS21903-5 | KIT, PROOF PRESS TEST | 1 | |
| GS21908-1 | PRESSURE TEST CAP | 2 | |
| GS21909-1 | PRESSURE TEST CAP | 2 | |
| GS21914-1 | CLOSURE KIT, VALVE, PRESSURE REG. | 2 | |
| GS21919-1 | PRESS, BEARING | 1 | |
| GS22018-1 | SEAL COMPRESSOR | 1 | |
| GS22038-1 | SEAL COMPRESSOR | 1 | |
| GS22041-1 | SEAL COMPRESSOR | 1 | |
| GS22071-1 | Pressure Switch Torque adapter | 2 | |
| GS22076-1 | COMPRESSOR SEAL | 2 | |
| GS22076-1 | Seal Compressor | 2 | |
| GS22187-1 | PRESSURE TEST CAP | 1 | |
| GS22235-1 | FIXTURE, VALVE PRESSURE TEST | 1 | |
| GS22257 | PRESSURE CONTROLLER | 1 | |
| GS22257-1 | CLOSURE KIT, CONTROLLER, PRESSURE | 1 | |
| GS22266-1 | FIXTURE, PRESSURE & LEAKAGE TEST | 2 | |
| GS22292-1 | COMPRESSOR, SEAL | 2 | |
| GS22314-1 | Pressure Test Cap | 2 | |
| GS22320-2 | FIXTURE, PRESSURE TEST | 2 | |
| GS22330-1 | Compressor End Holding Fixture | 2 | |
| GS22339-1 | Pressure Test Fixture | 1 | |
| GS22412-1 | COMPRESSOR, SPLIT RING | 1 | |
| GS22514-1 | COMPRESSOR, L-SEAL | 1 | |
| GS22529-1 | EXTRACTOR, COMPRESSOR HOUSING | 2 | |
| GS22664-1 | VALVE PRESSURE TEST FIXTURE (3IT) | 1 | |
| GS22664-2 | VALVE PRESSURE TEST FIXTURE | 1 | |
| GS22802-1 | COMPRESSOR INLET ADAPTER | 1 | |
| GS22902-1 | CAP, PRESSURE TEST | 1 | |
| GS22903-1 | CAP, PRESSURE TEST | 1 | |
| GS22911-1 | CAP, PRESSURE TEST | 1 | |
| GS22934-1 | CAP, PRESSURE TEST | 1 | |
| GS22935-1 | CAP, PRESSURE TEST | 1 | |
| GS22987-1 | BLADE SEAL COMPRESSOR | 5 | |
| GS229871 | BLADE SEAL COMPRESSOR | 5 | |
| GS23001-1 | WEAR PLATE PRESS | 1 | |
| GS23013-1 | Hub Pressurizer | 7 | |
| GS230131 | ATR PROP HUB PRESSURIZER | 7 | |
| GS23075-1 | PRESSURE TEST CAP | 1 | |
| GS23076-1 | PRESSURE TEST CAP | 1 | |
| GS23077-1 | PRESSURE TEST CAP | 1 | |
| GS23078-1 | PRESSURE TEST CAP | 1 | |
| GS23137-1 | Seal Compressor | 8 | |
| GS231371 | BLADE SEAL COMPRESSOR | 8 | |
| GS23180-1 | PRESSURE TEST PLUG | 1 | |
| GS23181-1 | PRESSURE TEST CAP | 1 | |
| GS23227-1 | Pressure Test Cap | 2 | |
| GS23229-1 | PRESSURE TEST COVER | 2 | |
| GS23240-1 | PRESSURE TEST COVER | 1 | |
| GS23242-1 | PRESSURE TEST COVER | 1 | |
| GS23246-1 | PRESSURE TEST CLAMP/COVER | 1 | |
| GS23247-1 | PRESSURE TEST COVER | 1 | |
| GS23340-1 | SEAL COMPRESSOR | 1 | |
| GS233471 | COMPRESSEUR | 1 | |
| GS23354-1 | SEAL COMPRESSOR | 1 | |
| GS23355-1 | SEAL COMPRESSOR | 1 | |
| GS23356-1 | SEAL COMPRESSOR | 1 | |
| GS23357-1 | SEAL COMPRESSOR | 1 | |
| GS23358-1 | SEAL COMPRESSOR | 1 | |
| GS23359-1 | SEAL COMPRESSOR | 1 | |
| GS23360-1 | SEAL COMPRESSOR | 1 | |
| GS23361-1 | SEAL COMPRESSOR | 1 | |
| GS23362-1 | SEAL COMPRESSOR | 1 | |
| GS23409-1 | TRANSFER TUBE SEAL COMPRESSOR | 1 | |
| GS23411-21 | INNER TRANSFER TUBE SEAL COMPRESS. | 1 | |
| GS23413-1 | Seal Compressor | 17 | |
| GS234131 | TRANSFERT TUBE SEAL COMPRESSOR | 17 | |
| GS23420 | MAIN SEAL COMPRESSOR | 1 | |
| GS23420-1 | BLADE SEAL COMPRESSO | 17 | |
| GS234201 | BLADE SEAL COMPRESSOR | 17 | |
| GS23423-1 | PISTON SEAL COMPRESSOR | 1 | |
| GS23435 | BARREL PRESSURIZER | 1 | |
| GS23435-1 | Pressurizer MVB | 16 | |
| GS234351 | HUB PRESSURE TOOL | 16 | |
| GS23444-1 | Transfer Tube Tube Seal Compressor | 9 | |
| GS23463-1 | PRESSURIZER, BARREL | 1 | |
| GS23508-1 | CAP, PRESSURE TEST | 1 | |
| GS23511-1 | PRESSURE TEST CAP | 1 | |
| GS23512-1 | PRESSURE TEST CAP | 1 | |
| GS23599-1 | CAP, PRESSURE TEST | 1 | |
| GS23600-1 | CAP, PRESSURE TEST | 1 | |
| GS23987-1 | PRESSURE TEST CLAMP ASSEMBLY | 1 | |
| GS23987-2 | PRESSURE TEST CLAMP ASSEMBLY | 1 | |
| GS24000-1 | PRESSURE TEST | 2 | |
| GS24009-1 | PRESSURE TEST CAP | 2 | |
| GS24012-1 | , PRESSURE TEST | 1 | |
| GS240120-1 | PRESSURE TEST CAP | 1 | |
| GS24014-1 | PRESSURE TEST | 1 | |
| GS24014-2 | PLATE, PRESSURE TEST | 1 | |
| GS24015-1 | PRESSURE TEST | 1 | |
| GS24016-1 | CAP, PRESSURE TEST | 1 | |
| GS24036-1 | CAP, PRESSURE TEST | 1 | |
| GS24083-1 | CAP, PRESSURE TEST | 2 | |
| GS24091-1 | HOLDING FIXTURE, PRESSURE TEST | 1 | |
| GS24092-1 | CAP, PRESSURE TEST | 1 | |
| GS24122-1 | PRESSURE TEST COVER | 1 | |
| GS24123-1 | PRESSURE TEST COVER | 1 | |
| GS24130-1 | PRESSURE TEST CAP | 1 | |
| GS24150-1 | CLAMP AND COVER ASSY, PRESSURE TEST | 2 | |
| GS24171-1 | PRESSURE TEST CAP | 1 | |
| GS24178-1 | PRESSURE TEST FIXTURE | 1 | |
| GS24299-1 | FIXTURE, PRESSURE TEST | 1 | |
| GS24326-1 | FIXTURE, PRESSURE TEST | 1 | |
| GS24454-1 | COMPRESSOR, PISTON | 1 | |
| GS24542-1 | CAP, PRESSURE TEST | 1 | |
| GS24619-1 | SEAL , COMPRESSOR TOOL | 1 | |
| GS24685-1 | FIXTURE, PRESSURE TEST | 1 | |
| GS24706-1 | CAP, PRESSURE TEST | 1 | |
| GS25565-1 | Low Pressure Check Valve | 7 | |
| GS280 | AIR START, TURBINE COMPRESSOR - CART | 1 | |
| GS400 | AIR START, TURBINE COMPRESSOR - CART | 1 | |
| GS4200-USB | TRANSDUCER, PRESSURE (0 - 750 PSIG OR 0 - 1000 | 1 | |
| GS47078-200 | TOOL-PRESSURE TRANSDUCERS REPLACEMENT | 1 | |
| GS47544 | COMPRESSION TOOL | 1 | |
| GS48207-1 | GVI TIRE PRESSURE MONITORING UNIT (TMPU) MAINTENANCE HARNESS | 1 | |
| GS8001 | PRESSURE CONTROLLER TEST SET | 1 | |
| GSB 1210016 | GAUGE: AIR PRESSURE,STRUT | 2 | |
| GSB1216008 | CHARGING AND GAUGING TIRE PRESSURE (0-300 PSI) | 2 | |
| GSB1216009 | Manifold Kit − Charging−gauging High and Low Pressure Nitrogen | 1 | |
| GSB1216010 | Charging and Gauging Kit − Nitrogen High Pressure (0−3000 psi) | 3 | |
| GSB1216012 | Charging and Gauging Kit − Nitrogen Low Pressure (0−500 psi) | 2 | |
| GSB1216019 | Cart − Nitrogen (4 bottles) Charging Gauging High and Low Pressure | 1 | |
| GSB2100006 | VACUUM PUMP OR EQUIVALENT (CAPABLE OF PROVIDING A MINIMUM FLOW OF 0.93 CFM AT A DIFFERENTIAL PRESSURE OF 3 PSI). | 1 | |
| GSB2400016 | ADAPTER KIT − PITOT/STATIC PRESSURE TEST (SERIES 4 | 1 | |
| GSB2810006 | UNIT-FUEL TANK PRESSURE RELIEF TEST | 1 | |
| GSB2910009 | KIT-PRESSURE RELIEF VALVE TEST | 1 | |
| GSB3240002 | GAGE KIT − TIRE PRESSURE | 2 | |
| GSB3411012 | KIT-SERIES Q400 PITOT/STATIC PRESSURE TEST ADAPTER | 1 | |
| GSB3411013 | KIT-DASH 8 100-400 PITOT/STATIC PRESSURE TEST ADAPTER | 1 | |
| GSE 026 | GAUGE - TIRE PRESSURE | 1 | |
| GSE 027 | PRESSURE REGULATOR VALVE WITH PRESSURE GAUGES | 1 | |
| GSE 287 | CONNECTOR-HIGH PRESSURE SERVICING | 1 | |
| GSE 467 | KIT, BRAKE PRESSURE MEASUREMENT | 1 | |
| GSE 470 | LOW PRESSURE NITROGEN REGULATOR | 1 | |
| GSE026 | GAUGE - TIRE PRESSURE | 1 | |
| GSE1000536 | LOW-PRESSURE COOLING EXHAUST BLANK | 1 | |
| GSE1200461 | PRESSURE FILL CART (40 PSI MAXIMUM)-GSE1200461 | 1 | |
| GSE150 | REGULATOR, NITROGEN SERVICING HIGH PRESSURE | 1 | |
| GSE158 | ENGINE ADAPTER - COMPRESSOR CLEANING CART | 1 | |
| GSE170-LTC52015 | SPRING COMPRESSOR, PASSENGER AND SERVICE DOORS | 3 | |
| GSE196-LTC52073 | COMPRESSOR, SPRING ROD-OVERWING EMERGENCY DOOR | 1 | |
| GSE196-LTC52075 | COMPRESSOR, SPRING - PAX & SERV DOORS | 1 | |
| GSE3200197 | PRESSURE GAGE | 1 | |
| GSE3400304 | PITOT /STATIC PRESSURE TEST KIT | 1 | |
| GSE3400305 | PITOT / STATIC PRESSURE TEST ADAPTERS (PTA) | 1 | |
| GSE387 | PRESSURE GAUGE ASSEMBLY | 1 | |
| GSE405KIT | EMB170/190 POSITIVE PRESSURE RELIEF VALVE TEST KIT | 1 | |
| GSE470 | LOW PRESSURE NITROGEN REGULATOR | 1 | |
| GSE5220851 | AIR SPRING COMPRESSION TOOL | 1 | |
| GSE55720-105 | OVAL COMPRESSION SLEEVE | 1 | |
| GSE55787 | SPRING - COMPRESSOR, WLG | 1 | |
| GSE55904-111 | HYDRAULIC PRESSURE GAUGE | 1 | |
| GSE55904-112 | PRESSURE GAUGE ADAPTER | 1 | |
| GSE56007 | TOOL - COMPRESSION, SHOCK STRUT BLG | 1 | |
| GSE56111 | TOOL - COMPRESSION, SHOCK STRUT WLG | 1 | |
| GSE57817 | COMPRESSION TOOL, SHOCK STRUT | 1 | |
| GT9910014-GT0001-0001 | SPRING COMPRESSION TOOL ASSY | 1 | |
| GT9910014-GT0001-0010 | TOOL, SPRING COMPRESSION | 1 | |
| GT9910014-GT0001-0050 | CARGO DOOR SRPING COMPRESSION TOOL ASSEMBLY | 1 | |
| GT9910014-GT0001-0055 | COMPRESSION TOOL, A220 CARGO DOOR SPRING | 1 | |
| GTE20145 | ADAPTER NOZZLE CLEAN COMPRESS | 1 | |
| GTE30 | COMPRESSOR WASH UNIT | 1 | |
| GTPROD-C | REAMER, PILOTED .415 - .401 OVERSIZE PRESS NUT | 1 | |
| GTT0169 | COMPRESSOR WASH RIG | 1 | |
| GU30645 | PRESSURE PLATE | 1 | |
| GU31466 | PROBE HP COMPRESSOR WASH | 1 | |
| GU31467 | PROBE IP COMPRESSOR WASH | 1 | |
| GV-55-153 2 | GAUGE, PRESSURE: RANGE 0-1 MPA | 1 | |
| GV50-153 | PRESSURE GAUGE ( DRY TYPE / 0 ～ 60 PSI ) | 1 | |
| GV500 | HIGH PRESSURE 750MM | 1 | |
| GV500A | HIGH PRESSURE | 1 | |
| GV500ASK | HIGH PRESSURE PIPE 750MM | 1 | |
| GV501 | HIGH PRESSURE 4000MM | 1 | |
| GYJZ 934-1 | BARCOL IMPRESSOR | 1 | |
| GYZJ-934-1 | BARCOL IMPRESSOR | 3 | |
| GYZJ934-1 | BARCOL – IMPRESSOR | 3 | |
| GaugeCalHP | PRESSURE COMPARATOR | 1 | |
| H-112-40 | HEAD PRESS FIT BUSHING 1.250 | 1 | |
| H-1394 | PRESSURE GAUGE | 3 | |
| H-1395 | GAUGE, PRESSURE 0-30 PSI | 2 | |
| H-2016-01 | GAUGE, PRESSURE 0 - 300 PSI | 6 | |
| H-2318 | GAGE, PRESSURE, 0-15 PSI (0-1.03 BAR) | 1 | |
| H-2505 | GAUGE VACUUM/PRESSURE -30INHG-30PSI | 1 | |
| H-2636 | GAUGE, A/C TIRE PRESSURE | 3 | |
| H-2657 | GAGE, PRESS 0-60 PSI/BAR | 3 | |
| H-2686 | TIRE PRESSURE GAUGE | 1 | |
| H-2755 | AIR CHUCK HI PRESSUR | 3 | |
| H-2890-01 | GAUGE, DIFFERENTIAL PRESSURE | 3 | |
| H-4660A | CLIP-ON LARGE BORE AIR CHUCK – SECURE INFLATION FOR HIGH-PRESSURE VALVES | 14 | |
| H-48-8-12mm | PRESS FIT BUSH. O.D.3/4ÓXI.D.12mm X 1/2ÓLG | 1 | |
| H-5265 | HIGH PRESSURE VALVE CONNECTION | 12 | |
| H-556 | HIGH PRESSURE VALVE CONNECTION | 3 | |
| H-6116B | HIGH PRESSURE VALVE CONNECTION | 2 | |
| H-927 | HOSE, HYDRAULIC HIGH-PRESSURE | 1 | |
| H-985-HP-SS-NL-1/4-E | PRESSURE RELIEF VALVE (FOR HP CART) | 1 | |
| H-995-HP-SS-NL-1/4-B | PRESSURE RELIEF VALVE (FOR HP CART) | 1 | |
| H-MAN-003 | PRESSURE GAUGE | 1 | |
| H0004 | Pressure Gauge | 1 | |
| H0040A | GAUGE, PRESSURE | 1 | |
| H0041 | FUEL PRESS TEST | 2 | |
| H0041-05 | RELIEF VALVE CHECKING PRESS. 3psi (MV8028-5-016) | 1 | |
| H0248 | GAUGE, PRESSURE | 1 | |
| H03-2612 | COMPRESSED AIR FILTER SR 99 | 1 | |
| H102014-3 | PRESSURE TEST CAP | 1 | |
| H102014-5 | PRESSURE TEST CAP | 1 | |
| H102014-7 | PRESSURE TEST CAP | 1 | |
| H1395 | GAUGE: PRESSURE0-30 PSI | 2 | |
| H1670 | JET Equipment & Tools H1670 Piston Ring Compressor Set - 2-78 to 4-38 | 1 | |
| H1724-06 | BUSHING: HD,PRESS FIT, | 2 | |
| H1724-09 | BUSHING: HD,PRESS FIT, | 2 | |
| H2016-01 | GAUGE: AIR PRESSURE,TIRE,A/C, 0-300PSI | 6 | |
| H207425-1 | ADAPTER - FUEL PRESSURE TRANSDUCER | 1 | |
| H207427-1 | ADAPTER - OIL PRESSURE TRANSDUCER | 1 | |
| H21969 | DE-PRESSURIZATION TOOL | 11 | |
| H2205 | SPRING, COMPRESSION, | 1 | |
| H2636 | TYRE PRESSURE GUAGE | 3 | |
| H2657 | GAUGE: PRESSURE,0-60PSI, | 3 | |
| H2686 | TRONAIR ASSY, TIRE PRESSURE GAUGE | 1 | |
| H2792 | FILTER: COMPRESSOR,ENGINE,WATER, | 1 | |
| H2890-01 | GAUGE: PRESSURE, | 3 | |
| H3246 | GAUGE VACUUM/PRESSURE -30INHG-60PSI | 1 | |
| H3246-1 | GAUGE: PRESSURE,30/60 PSI, | 2 | |
| H47015 | TEST PLUG FOR THE PRESSURE INDICATOR VALVE ASSEMBLY (3-120C) | 6 | |
| H47015 3/120C | TEST PLUG FOR THE PRESSURE INDICATOR VALVE | 1 | |
| HA1601-005 | ADAPTER WITH GAGE 0-25BAR, INFLATION OF PRESSURE | 1 | |
| HA1604-001 | TYRE PRESSURE GAUGE | 1 | |
| HA1604-00114-6806-6011 | THE DEVICE FOR CHECKING THE PRESSURE IN THE WHEELS (MANOMETER) | 1 | |
| HA1604-003 | PRESSURE GAGE | 1 | |
| HA9206 | HIGH PRESSURE HYDRAULIC HOSE | 2 | |
| HALOCARBON SERIES 25-5S | ARBOR PRESS FIXTURE | 1 | |
| HAR-8700-2500-580 | AIR REGULATOR HIGH PRESS | 1 | |
| HC-1042 | PRESSURE GAUGE 5000 PSI / 340 BAR 63mm | 4 | |
| HC-1129 | GAUGE, PRESSURE 0-5000 PSI | 2 | |
| HC-1257 | PRESSURE GAUGE | 3 | |
| HC-1264-01 | PRESSURE RELIEF VALVE | 2 | |
| HC-1277 | GAUGE, PRESSURE 0-400 PSI | 2 | |
| HC-1385 | GAUGE, PRESSURE 0-3000 PSI | 2 | |
| HC-1386 | GAUGE, PRESSURE 0-5000 PSI | 3 | |
| HC-1399 | GAUGE,PRESSURE 0-5000 PSI | 4 | |
| HC-1423 | GAUGE,PRESSURE 0-300 PSI | 1 | |
| HC-1583 | ASS'Y, DRY PRESSURE GAUGE | 1 | |
| HC-1584 | ASS'Y, DRY PRESSURE GAUGE | 1 | |
| HC-1588 | ASS'Y, DRY PRESSURE GAUGE | 1 | |
| HC-1601 | GAUGE, O2 CLEANED PRESSURE | 1 | |
| HC-1602 | GAUGE, O2 CLEANED PRESSURE | 3 | |
| HC-1622 | GAUGE: PRESSURE,0-300PSI, | 1 | |
| HC-1644 | GAUGE, PRESSURE 0-6000 PSI | 3 | |
| HC-1783 | GAUGE, PRESSURE 0-3000 PSI | 4 | |
| HC-1784 | GAUGE, PRESSURE 0-300 PSI | 3 | |
| HC-1787 | GAUGE, PRESSURE 0-200 PSI | 2 | |
| HC-1813 | PRESSURE GAUGE 0-160 PSI | 1 | |
| HC-1831 | GAUGE,PRESSURE 0-160 PSI | 3 | |
| HC-1835 | GAUGE PRESSURE 0-100 PSI | 1 | |
| HC-1868 | GAUGE: PRESSURE,0-600PSI, 0-600PSI,GLYCERIN FILLED | 1 | |
| HC-2127 | VALVE, PRESSURE RELIEF(MB) | 1 | |
| HC-2144 | SYSTEM PRESSURE GAUG | 5 | |
| HC-2145 | GAUGE, PRESSURE 7500 PSI | 2 | |
| HC-2146 | GAUGE, PRESSURE 10000 PSI | 3 | |
| HC-2188-1 | GAUGE: PRESSURE 0-300 PSI, | 1 | |
| HC-2199 | VALVE, PRESS RELIEF (MB) | 1 | |
| HC-2239 | PRESSURE GAUGE | 4 | |
| HC-2275 | PRESSURE GAUGE 60 PSI / 4 BAR 63mm | 1 | |
| HC-2278 | GAUGE, PRESSURE 0-160 PSI | 3 | |
| HC-2279 | PRESSURE GAUGE | 4 | |
| HC-2279C | PRESSURE GAUGE 0-5000 PSI | 1 | |
| HC-2284-K | GAUGE PRESS 0-400 PSI O2 CLEAN | 2 | |
| HC-2289 | GAUGE, PRESSURE, O2 CLEANED | 4 | |
| HC-2304 | GAUGE PRESSURE | 1 | |
| HC-2706 | GAUGE, PRESSURE6,000PSI | 1 | |
| HC-2707 | GAUGE, PRESSURE15,000 PSI | 1 | |
| HC1042 | GAUGE: PRESSURE,0-5000PSI | 4 | |
| HC1129 | GAUGE: PRESSURE,0-5000PSI, | 2 | |
| HC1142-1 | PRESSURE HOSE ASSY, | 2 | |
| HC1257 | GAUGE: PRESSURE,0-5000PSI | 3 | |
| HC1264-01 | VALVE: PRESSURE RELIEF, | 2 | |
| HC1264-1 | VALVE: PRESSURE. RELIEF, | 1 | |
| HC1277 | PRESSURE GAUGE (0-400 PSI) | 2 | |
| HC130H0085-000 | PRESSURE GUAGE | 1 | |
| HC130H0149-000 | 146 RUDDER COMP COMPRESSOR | 1 | |
| HC130H0232-000 | PRESSURE GAUGE | 4 | |
| HC134H0002-000 | OVERPRESSURE ADAPTER | 1 | |
| HC1385 | GAUGE: PRESSURE,0-3000PSI | 2 | |
| HC1386 | GAUGE: PRESSURE,0-5000PSI, | 3 | |
| HC1399 | PRESSURE GAUGE 0-5000 PSI (NOSHOK) | 4 | |
| HC1413-01 | INDICATOR: CLOGGING,PRESSURE,FILTER, | 2 | |
| HC1423 | GAUGE: PRESSURE,0-300PSI, | 1 | |
| HC1583 | GAUGE: DRY PRESSURE,NITROGEN, | 1 | |
| HC1584 | GAUGE: PRESSURE, | 1 | |
| HC1588 | GAUGE: PRESSURE,DRY, | 1 | |
| HC1601 | GAUGE: PRESSURE,OXYGEN, | 1 | |
| HC1602 | GAUGE: PRESSURE,OXYGEN, | 3 | |
| HC1622 | GAUGE: PRESSURE,0-300PSI, | 1 | |
| HC1644 | GAUGE: PRESSURE, | 3 | |
| HC1776 | FILTER: PRESSURE, | 2 | |
| HC1783 | GAUGE, PRESSURE | 4 | |
| HC1784 | PRESSURE GAUGE | 3 | |
| HC1787 | GAUGE: PRESSURE0-200PSI | 2 | |
| HC1831 | PRESSURE GUAGE 0-160 PSI | 3 | |
| HC1862 | GAUGE: PRESSURE,0-1500PSI, | 1 | |
| HC2144 | GAUGE: PRESSURE,0-6000PSI, | 5 | |
| HC2145 | GAUGE: PRESSURE0-750PSI | 2 | |
| HC2146 | GAUGE: PRESSURE, | 3 | |
| HC2188 | GAUGE: PRESSURE 0-300 PSI, | 1 | |
| HC2239 | PRESSURE GAUGE - HC- | 4 | |
| HC2239-0-600PSI | GAUGE, PRESSURE 0-600PSI | 1 | |
| HC2278 | GAUGE: PRESSURE,0-160PSI, | 3 | |
| HC2279 | PRESSURE GAUGE - HC- | 4 | |
| HC2284K | GAUGE: PRESSURE,400 PSI, O2 CLEANED | 2 | |
| HC2289 | GAUGE: PRESSURE,0-5000PSI, OXYGEN,CLEAN | 4 | |
| HC600-1P | CART - HYDRANT - PORTABLE BIOCIDE INJECTION: 20-250 GPM - MAX LINE PRESSURE = 100 PSI - INJECTION SYSTEM MIN RATIO 10 PPM - SIZE: 48 IN X 30 IN X 32 IN | 1 | |
| HC800-1S | CART - HYDRANT, PORTABLE BIOCIDE INJECTION: 75-700 GPM, MAX LINE PRESSURE = 100 PSI, ADDITIVE INJECTION - MIN RATIO = 10 PPM SIZE: 46 IN X 60 IN X 72 INCH WEIGHT = 1000 LBS | 2 | |
| HCS2027-01 | PRESSURE GAUGE 0-30PSI | 3 | |
| HD 8/20 G ADV | PRESSURE WASHER ( PETROL VERSION) | 1 | |
| HD 9/23 DE TR1 | KARCHER HIGH-PRESSURE CLEANER | 1 | |
| HDB-250 | DRILL MACHINE (RYOBI PRESS 250W HDB-250) | 1 | |
| HDS 10/20-4 M | PRESSURE WASHER KARCHER HDS 10/20-4 M - 2900 PSI | 1 | |
| HDS 1000 DE | HIGH PRESSURE CLEANER WITH STEAM STAGE | 1 | |
| HDS 3.5/30-4 | KARCHER STEAM CLEANER - HDS 3.5/30-4 EA STANDARD HOT WATER PRESSURE WASHER, DIESEL/ELECTRIC, 3000 PSI, 3.5 GPM | 1 | |
| HDS 9/18-4 M | HIGH-PRESSURE WASHER | 1 | |
| HDS1000 | 3000PSI KARCHER HDS 1000 BE HOT WASH PRESSURE WASHER | 1 | |
| HDS1024-4M | PRESSURE WASHER, KARCHER | 1 | |
| HDS601C | HOT WATER HIGH PRESSURE WASHER | 1 | |
| HEPAL200 | HIGH PRESSURE REGULATOR - SINGLE STAGE. MOUNTING ON 200300 BAR GAS CYLINDER | 1 | |
| HER-06 | FLEXIBLE TUBE COMPRESSOR WASHING | 1 | |
| HER-11 | PRESS REDUCTOR FOR COMPRESSOR WASHING | 1 | |
| HER-12 | PRESS REDUCTOR NITROGEN | 1 | |
| HER-16 | AIR COMPRESSOR FT 7,5 | 1 | |
| HER51B4887 | COMPRESSING TOOL FOR WIRE ROPE | 1 | |
| HER51C887 | COMPRESSING TOOL FOR WIRE ROPE | 1 | |
| HER64CGMP | OVAL PRESS | 1 | |
| HF30351 | PRESS. MANOMETER | 1 | |
| HF30351/30326 | PRESS MANOMETER | 1 | |
| HF439 | GAGE ASSY AIR PRESSUR KMA 0-100PSI | 2 | |
| HF457 | PRESSURE GAUGE 0-100 PSI | 1 | |
| HFE95-20D10 | CAFETEIRA NESPRESSO | 1 | |
| HH.HP5000.12000.2JIC | HIGH PRESSURE HOSE TOOL | 1 | |
| HH.LP1000.12000.2JIC | LOW PRESSURE HOSE TOOL | 1 | |
| HIGH PRESSURE NITROGEN BOTTLE | HIGH PRESSURE NITROGEN BOTTLE REGULATOR WITH HOSE FOR REFILLING FOX KING,SHOCKS SWAY -A-WAY | 1 | |
| HIGH PRESSURE NITROGEN REGULAT | HIGH PRESSURE NITROGEN REGULATOR 4,000 PSI (INPUT AND OUTPUT) | 1 | |
| HK-3614 | PRESS FILTER | 5 | |
| HKF50P | PRESSURE WASHER | 1 | |
| HKM170-375-206 | PRESSURE TRANSDUCER | 1 | |
| HL GK-Y100-2 | PRESSURE GAUGE | 1 | |
| HL1810S | PRESSURE GREASE GUN | 1 | |
| HLA-A-1657-4000 | HIGH PRESSURE HOSE A | 2 | |
| HLA-A-1659-10000 | HIGH PRESSURE HOSE A | 1 | |
| HLA-A-1837- IND | PRESSURE GAUGE | 1 | |
| HLA-A-1837-IND | PRESSURE GAUGE | 1 | |
| HLA-A-5622- IND | PRESSURE GAUGE | 1 | |
| HLA-A-5622-IND | PRESSURE GAUGE | 1 | |
| HLA-A-5783- IND | PRESSURE GAUGE | 1 | |
| HLA-A-5789-IND | PRESSURE GAUGE | 1 | |
| HLA-K-5619-4000 | HIGH PRESSURE HOSE ASSY | 1 | |
| HLA-R-1837 | PRESSURE GAUGE( 0-900PSI) (HYDROPNEU) | 1 | |
| HLA-X-1657-4000-OBT | HIGH PRESSURE HOSE ASSY | 1 | |
| HLA-X-1659-10000-OBT | HIGH PRESSURE HOSE ASSEMBLY | 1 | |
| HLA1630 | Pressure Gauge Adapter Up to 600bar | 1 | |
| HLA1630-OBT | DIGITAL PRESSURE GAUGE 0-100BAR (1450 PSI) | 1 | |
| HLA1630-T | Pressure Gauge Adapter Up to 250bar | 1 | |
| HLA1657-2600 | High/Low Pressure Hose NATO Female 2600MM | 1 | |
| HLA1657-5000 | High/Low Pressure Hose NATO Female 5000MM | 1 | |
| HLA1659-2600 | High/Low Pressure Hose BNAE DN8 Female 2600MM | 1 | |
| HLA1659-5000 | High/Low Pressure Hose BNAE DN8 Female 5000MM | 1 | |
| HLA1659-8000 | High/Low Pressure Hose BNAE DN8 Female 8000MM | 1 | |
| HLA1836 | Pressure Gauge DN75 0-16 bar/PSI | 1 | |
| HLA1837 | Pressure Gauge DN75 0-60 bar/PSI | 1 | |
| HLA1838 | Pressure Gauge DN75 0-100 bar/PSI | 1 | |
| HLA1839 | Pressure Gauge DN75 0-250 bar/PSI | 1 | |
| HLA2626-HPL-02 | PRESSURE REGULATOR(PRESSURE GAUGE 0-5800PSI) (CEWAL) | 1 | |
| HLA2626-HPL-020 | PRESSURE REGULATOR(PRESSURE GAUGE 0-3500PSI) (CEWAL) | 1 | |
| HLA2626-HPL020 | Nitrogen High Pressure Regulator | 1 | |
| HLA2626-HPL020-02 | HIGH PRESSURE REGULATOR - 350 BAR MAX IN, 0-250 BAR MAX OUT | 1 | |
| HLA2626-HPL020-AN4-02 | MANODETENDEUT OXYGENE HAUTE PRESSION | 1 | |
| HLA2626-HPL020-AN4-O2 | Oxygen Pressure Regulator HP Type F / AN4 | 1 | |
| HLA2626-HPL020-DEGO2 | HIGH PRESSURE REGULATOR | 1 | |
| HLA4323 | Pressure Gauge DN75 0-6 bar/PSI | 1 | |
| HLA4422 | Precision Pressure Controller in Case | 1 | |
| HLA4424-NM | Precision Pressure Controller (with Case) 0-30bar/PSI Standard Fitting | 1 | |
| HLA4424-NM-GD | Precision Pressure Controller (with Case) 0-30bar/PSI High Flow Fitting | 1 | |
| HLA4424-NM-GS | Precision Pressure Controller (with Case) 0-30bar/PSI High Flow Fitting with Safety | 1 | |
| HLA4424-NM-NA | Precision Pressure Controller (with Case) 0-30bar/PSI Screw-On Fitting | 1 | |
| HLA4424-NM-PS | Precision Pressure Controller (with Case) 0-30bar/PSI Standard Fitting with Safety | 1 | |
| HLA4816-2600 | LOW PRESSURE HOSE ASSY | 1 | |
| HLA4893 | Airbus Fuel Tank Pressurization Bench | 1 | |
| HLA5235 | Pressure Gauge DN75 0-600 mbar/PSI | 1 | |
| HLA5236 | Pressure Gauge DN75 0-40 bar/PSI | 1 | |
| HLA5238 | Pressure Gauge DN75 0-160 bar/PSI | 1 | |
| HLA5239 | Pressure Gauge DN75 0-400 bar/PSI | 1 | |
| HLA5423 | Pressure Gauge DN75 0-2.5 bar/PSI | 1 | |
| HLA5619-2000 | High/Low Pressure Hose NATO Female x BNAE DN8 Female 2000MM | 1 | |
| HLA5619-3000 | High/Low Pressure Hose NATO Female x BNAE DN8 Female 3000MM | 1 | |
| HLA5619-5000 | High/Low Pressure Hose NATO Female x BNAE DN8 Female 5000MM | 1 | |
| HLA5622 | Pressure Gauge DN75 0-30 bar/PSI | 1 | |
| HLA5783 | Pressure Gauge DN75 0-600 bar/PSI | 1 | |
| HLA5944 | Pressure Tap Adapter | 1 | |
| HLA6287 | Pressure Gauge DN75 0-4 bar/PSI | 1 | |
| HLA6424-3-G1/4 | DIGITAL PRESSURE GAUGE | 1 | |
| HLA6424-300-M10 | BAR/PSI DIGITAL PRESSURE GAUGE | 1 | |
| HLA6424-300-M10-DEG02 | DIGITAL PRESSURE GAUGE | 1 | |
| HLA6424-300-M10-DEGO2 | PRESSURE GAUGE | 1 | |
| HLA6424-A-10 | DIGITAL PRESSURE GAUGE 0-100BAR (1450 PSI) | 1 | |
| HLA6424-A-30 | BAR/PSI DIGITAL PRESSURE GAUGE | 1 | |
| HLA6424A | Digital Pressure Gauge 3/30/300bar | 1 | |
| HLA6424A-300-M | BAR/PSI DIGITAL PRESSURE GAUGE | 1 | |
| HLA6424A-300-M1 | BAR/PSI DIGITAL PRESSURE GAUGE | 1 | |
| HLA6424A-DEG O2 | Digital Pressure Gauge 3/30/300bar | 1 | |
| HLA6424A-M10-100 | DIGITAL PRESSURE GAUGE 0-100BAR (1450 PSI) | 1 | |
| HLA6424A-XX-YY-PRMNRF | Digital Pressure Gauge with Shock Protection | 1 | |
| HLA6427A-GD | Precision Pressure Controller for Large Valve (with Case) | 1 | |
| HLA6427A-PD | Precision Pressure Controller for Standard Valve (with Case) | 1 | |
| HLA6578-1000 | High/Low Pressure Hose NATO Female x AN4 Female 1000MM | 1 | |
| HLA6578-2000 | High/Low Pressure Hose NATO Female x AN4 Female 2000MM | 1 | |
| HLA6578-5000 | High/Low Pressure Hose NATO Female x AN4 Female 5000MM | 1 | |
| HLA6588 | Pneumatic Inflation Case (Pressure Gauge + Digital Inflation Handle 12 or 17bar) | 1 | |
| HLA6599 | Digital Precision Pressure Controller (with Case) 0-30bar/PSI Standard Fitting | 1 | |
| HLA6599-GD | Digital Precision Pressure Controller (with Case) 0-30bar/PSI High Flow Fitting | 1 | |
| HLA6599-GS | Digital Precision Pressure Controller (with Case) 0-30bar/PSI High Flow Fitting with Safety | 1 | |
| HLA6599-NA | Digital Precision Pressure Controller (with Case) 0-30bar/PSI Screw-On Fitting | 1 | |
| HLA6599-PS | Digital Precision Pressure Controller (with Case) 0-30bar/PSI Standard Fitting with Safety | 1 | |
| HLA6723 | PRESSURIZER AIR DRYER | 1 | |
| HLA7141 | PRECISION PRESSURE CONTROLLER FOR STD AND LARGE VALVE (WITH CASE) | 1 | |
| HLA8011-1 | Pressure Gauge DN75 0-20 bar/PSI | 1 | |
| HLA8016 | Pressure Gauge DN75 0-1 bar/PSI | 1 | |
| HLLH-556 | HIGH PRESSURE INFLATION CONNECTION 1/8 NPT (M) | 1 | |
| HM-18-12-11.5 | HEAD PRESS FIT METRIC 18 OD X 12 LG X 11.5 ID | 1 | |
| HM-18-20-10.5 | HEAD PRESS FIT BUSHING | 1 | |
| HM-22-16-12.5 | HEAD PRESS FIT BUSHING | 1 | |
| HM-22-16-15 | HEAD PRESS FIT METRIC 22 OD X 16 LG X 15 ID | 1 | |
| HM2H87P109LF | ENGINE COMPRESSOR WASHER | 1 | |
| HMAN-AF-100-P-00200-1G | RETURN PRESSURE GAUGE 0-200 PSI | 1 | |
| HMU100-2 | TOOL KIT, WBHS PRESSURE TEST | 1 | |
| HP 200NG | NITROGEN REGULATOR HP 200NG HIGH PRESSURE SINGLE-STAGE NITROGEN REGULATOR | 1 | |
| HP400B18R81PABJ | PRESSURE REGULATOR HP | 1 | |
| HP500F11R81PABC | PRESSURE REGULATOR LP | 1 | |
| HP702-125-350-BE | REGULATOR, PRESSURE | 1 | |
| HP702-125-BS341-BE | REGULATOR PRESSURE (HARRIS CALORIFIC.INC) | 1 | |
| HP742-125-580-8-4 | PRESSURE REGULATOR | 1 | |
| HPC41-300PSI-N-AHX | PRESSURE CALIBRATOR | 1 | |
| HPC8130 | HEAVY DUTY HIGH PRESSURE CLEANER | 1 | |
| HPG HOSE SET | FABRICATED SET - HIGH PRESSURE GAUGE HOSE | 1 | |
| HPH-1 | HIGH PRESSURE HOSE | 1 | |
| HPL-RALL-GD | RIGID PRESSURE CONNECTOR FOR LARGE VALVE | 1 | |
| HPL-RALL-PD | RIGID PRESSURE TAP FOR STANDARD VALVE | 1 | |
| HPM-02 | RAT PRESSSURE MONITORING TOOL | 3 | |
| HPM-20 | HYDRAULIC PRESS: FOR FORMING AND SHAPING METAL UNDER PRESSURE. | 1 | |
| HPM02 | PRESSURE MONITOR TOOL | 3 | |
| HPT1500 | TWO SPEED HIGH PRESSURE HYDRAULIC HAND PUMP | 1 | |
| HQD-010-HA | UNIONS/COUPLING FOR THE RAT TEST TOOL (MEASUREMENTS RETURN HOSE 33MM AND PRESSURE HOSE 31MM) | 3 | |
| HRK-02 | PRESSURE MONITOR TOOL - RAM AIR TURBINE | 2 | |
| HRK02 | PRESSURE MONITOR TOOL - RAM AIR TURBINE | 2 | |
| HS7017 | COMPRESSOR | 1 | |
| HS7062 | ADAPTER PRESSUR | 1 | |
| HS7126 | ADAPTER PRESSUR | 1 | |
| HS7146 | FIXTURE-PRESS. REG VALVE TEST | 1 | |
| HS7178 | COMPRESSOR | 1 | |
| HS7240 | ADAPTER PRESSUR | 1 | |
| HS7267 | COMPRESSOR VALV | 1 | |
| HS7520 | MECHANICAL PULLER - HIGH PRESSURE RELIEF VALVE, STANDBY VALVE AND PISTON AND SLEEVE ASSEMBLY | 1 | |
| HS7527 | SPRING COMPRESSOR | 1 | |
| HS7634 | COMPRESSOR | 1 | |
| HS7656 | COMPRESSOR | 1 | |
| HS7672 | FIXTURE - PRESS. REG. VALVE TEST | 2 | |
| HS7718 | TEST FIXUTRE - HIGH PRESSURE RELIEF VALVE | 1 | |
| HS8097 | BELLOWS SPRING COMPRESSING CLAMP | 1 | |
| HS8101 | HIGH PRESSURE RELIEF CLAMP | 1 | |
| HS8171-PS | TAPE, PRESSURE-SENSITIVE | 1 | |
| HS8690 | MAN. MIN PRESS SENSOR VIB | 2 | |
| HS8727 | COMPRESSOR | 1 | |
| HS8740 | FIXTURE-TEST, PRESSURE | 1 | |
| HS8742 | FIXTURE TEST PRESS VAL | 1 | |
| HS8810-150 | PRESSURE TEST CAP | 1 | |
| HS8814 | CAP PRESSURE TE | 1 | |
| HS8905 | PLATE PRESSURE | 1 | |
| HS8934 | SLEEVE PRESSURE | 1 | |
| HS8995 | COMPRESSOR - SPRING | 1 | |
| HS9188-9 | CAP PRESSURE TE | 1 | |
| HS9205 | CAP PRESSURE TEST | 1 | |
| HS9212 | CAP, PRESSURE TEST | 1 | |
| HS9214 | CAP, PRESSURE TEST | 1 | |
| HS9215 | CAP-PRESSURE TEST | 1 | |
| HS9287 | CAP PRESSURE TE | 1 | |
| HS9453-100 | PRESSURE TEST CAP(2 REQUIRED) | 1 | |
| HS9453-250 | CAP PRESSURE TE | 1 | |
| HS9453-300 | PRESSURE CAP | 1 | |
| HS9453-301 | PRESSURE CAP | 1 | |
| HS9453-400 | PRESSURE TEST CAP | 1 | |
| HS9453-550 | PRESSURE TEST | 1 | |
| HS9453-600 | ADAPTER,PRESSURE TEST | 1 | |
| HS9486 | PRESSURIZING AND REGULATING VALVE | 1 | |
| HS9512 | FIXTURE - SPRING COMPRESSING | 2 | |
| HS9619 | CAP PRESSURE TEST | 1 | |
| HS9623 | PRESSURE TEST CAP | 1 | |
| HS9624 | PRESSURE TEST CAP | 1 | |
| HS9634 | CAP PRESSURE | 1 | |
| HS9637 | CAP PRESSURE TE | 1 | |
| HS9639 | ADAPTER PRESSURE | 1 | |
| HS9645 | CAP PRESSURE TE | 1 | |
| HS9672 | COMPRESSOR - RELIEF VALVE SPRING | 1 | |
| HS9769 | COMPRESSOR | 1 | |
| HS9770 | COMPRESSOR, SPRING | 1 | |
| HSK6263 | DECOMPRESSION TESTER | 1 | |
| HSK6263-1 | CRJ LATCH PRESSURE TEST KIT | 35 | |
| HSK6263-11 | DECOMPRESSION TEST TOOL | 2 | |
| HSK6263–1 | HARTWELL DECOMPRESSION LATCH TESTER | 35 | |
| HSK6263−1 | Pressure Latch Tester | 35 | |
| HSS-503069E | HOT WATER PRESSURE WASHER | 1 | |
| HT-300-CW | SERIES 300 COMPRESSOR WASH SYSTEM | 3 | |
| HT-500-010P-019A | AIR TANK PRESSURE GAUGE | 1 | |
| HT-500-010P-06 | 100 PSI PRESSURE GAUGE | 1 | |
| HT-500-010P-65C | REPLACEMENT TANK PRESSURE RELIEF | 2 | |
| HT-500-CWA | SERIES 500 COMPRESSOR WASH SYSTEM WITH AUXILIARY AIR TANK | 3 | |
| HT-500-CWA-F-3 | COMPRESSOR WASH FITTINGS ADAPTER (AW139) | 1 | |
| HT-900-NC | SERIES 500 COMPRESSOR WASH SYSTEM WITH AUXILIARY AIR TANK | 1 | |
| HT-F14 | PRESSURE GAUGE | 1 | |
| HT2000-1-E/1-S | MAIN PRESSURE GAUGE 0-5000 PSI | 3 | |
| HT300 | COMPRESSOR WASH KIT | 1 | |
| HT500CWA | COMPRESSOR WASH | 3 | |
| HTE29671 | PRESSURE TEST FIXTURE FOR CONDUCTING TEST ON GUIDE TUBE ASSY (P/N CH1543A0011) | 1 | |
| HTE714-85G | PRESSURIZATION-ACT COUPLING | 1 | |
| HU144212 | BUSH LOCATION LP COMPRESSOR | 1 | |
| HU17738 | PRESS TOOL | 1 | |
| HU18591-1 | HP COMPRESSOR MANDREL | 1 | |
| HU20604 | GAGE, POSITION OF I.D.G. COOLER TO L.P. COMPRESSOR FAN CASE RB211 | 1 | |
| HU20704/3 | SPANNER - RETAINING BOLT, LOW PRESSURE COMPRESSOR | 1 | |
| HU21570 | ADAPTER - FRONT BEARING HOUSING AND LOW PRESSURE BEARING FEED | 1 | |
| HU24429/2 | COVER - PROTECTIVE, LP COMPRESSOR DISC AND BLADES | 1 | |
| HU26220 | PRESS CUP | 1 | |
| HU26477 | Press cup | 1 | |
| HU26592 | Press Tool | 1 | |
| HU26593 | Press cup | 1 | |
| HU26600 | Press cup | 1 | |
| HU26901 | PRESS SLEEVE | 1 | |
| HU27553 | PRESSURE TEST PLUG | 3 | |
| HU27554 | BLANK PRESS T/T | 4 | |
| HU28856-1 | Shaft - Drawbar & Guide, LP Compressor Shaft Oil Tube - RB211-535E4 Engine | 1 | |
| HU29649 | PIN - GUIDE LP COMPRESSOR SHAFT | 1 | |
| HU30645-1 | VALVE DUMMY FFG PRESSURIZING | 3 | |
| HU30645/1 | DUMMY PRESSURE & DRAIN | 3 | |
| HU31261 | PRESSURE OIL DRAIN TOOL | 4 | |
| HU31895 | SPANNER - RETAINING BOLTS, LOW PRESSURE COMPRESSOR | 1 | |
| HU32563 | ADAPTER - LIFTING, LP COMPRESSOR DISC | 1 | |
| HU33429 | PRESSURE PAD | 1 | |
| HU33430 | PRESSURE PAD | 1 | |
| HU33485 | PRESSURE PAD | 1 | |
| HU34332 | PRESSING TOOL | 2 | |
| HU34332-2 | PRESS, RADIAL.DRIVE | 1 | |
| HU37424-1 | TROLLEY - TURNOVER LP COMPRESSOR | 1 | |
| HU37548-1 | BRACKET - LP COMPRESSOR MODULE | 1 | |
| HU37549-2 | BRACKET-LP COMPRESSOR MODULE | 2 | |
| HU37550-1 | BRACKET - LP COMPRESSOR MODULE | 1 | |
| HU37624 | BRACKET - COMPRESS SPRING PACK | 1 | |
| HU37624-2 | Spring Compressor | 1 | |
| HU37631 | LOADING TOOL-SPLINED NUT, LP COMPRESSOR | 1 | |
| HU37701 | COVER - PROTECT, LP COMPRESSOR DISK & BLADES. | 2 | |
| HU37857 | CONTAINER - LP COMPRESSOR ROTOR | 1 | |
| HU38390-3 | PRESS-LOCKNUT CUPWASHER, DEDICATED ALTERNATOR | 7 | |
| HU38949 | GUIDE-TUBE BSI STG.7 IP COMPRESSOR | 3 | |
| HU41471 | SHROUD PRESS | 1 | |
| HU41764-1 | IMMOBILIZER-LP COMPRESSOR ROTOR | 1 | |
| HU42140 | PRESS ADPT | 1 | |
| HU42383 | PRESS RING | 1 | |
| HU42395 | PRESS RING | 1 | |
| HU43324 | 4-6 COMPRESSOR SHAFT LIFTER | 2 | |
| HU43331 | PRESS-LOCKNUT CUPWASHER, DEDICATED ALTERNATOR | 2 | |
| HU43381 | PRESSING TOOL | 1 | |
| HU43419 | PRESSURE TEST ADAPTOR | 1 | |
| HU44525-1 | IMMOBILIZER - LOW PRESSURE COMPRESSOR | 10 | |
| HU44525-2 | LP COM PRESSOR IMMOBILIZER | 3 | |
| HU44525-21 | IMMOBILIZER - LOW PRESSURE COMPRESSOR | 1 | |
| HU50307 | ADAPTOR - EXTRACTION, IP COMPRESSOR MODULE. | 2 | |
| HU50307-1 | ADAPTOR - EXTRACTION, IP COMPRESSOR MODULE. | 1 | |
| HU50397-1 | ADAPTER - REM.INST LP COMPRESSOR DISK, BLADES | 1 | |
| HU51166 | ADAPTOR - EXTRACTOR - BORESCOPE PLUGS HP & IP COMPRESSOR | 5 | |
| HU55067 | TURNOVER FRAME (FRONT) LP COMPRESSOR CASE | 1 | |
| HU55123 | LP COMPRESSOR CASE, FRONT HANDLING FRAME | 1 | |
| HU55143 | TURNOVER FRAME (REAR) LP COMPRESSOR CASE | 1 | |
| HU55340 | LP COMPRESSOR CASE, REAR HANDLING FRAME | 1 | |
| HU55355 | LP COMPRESSOR CASE SLING | 1 | |
| HU55355-3 | LP COMPRESSOR CASE SLING | 1 | |
| HU80617-2 | ADAPTER-R/I LP COMPRESSOR DISK/BLADES | 1 | |
| HU80955 | IMMOBILISER - DOG LP COMPRESSOR WHILST BOROSCOPING,AND CHANGING FAN BLADES | 8 | |
| HU81261 | LOCATION/SUPPORT BLOCK - R/I LP COMPRESSOR | 1 | |
| HU81262 | LOCATION SUPPORT BLOCK - R I LP COMPRESSOR | 1 | |
| HU82159-2 | SECTION TEMPLATES CONCAVE (PRESSURE) SIDE 36 | 1 | |
| HV503A | HIGH PRESSURE 1000MM | 1 | |
| HVP203 | ALL FLEET / HEAVY DUTY AIR COMPRESSOR (MAX 16 BAR) | 1 | |
| HX601 | DIGITAL PRESSURE GAUGE | 2 | |
| HY-100 | COMPRESSOR | 1 | |
| HYD 135/145 | HYDRAULIC COMPRESSION | 1 | |
| HYD-135/145 | EC135, EC145, UH-72, COMPRESSION TOOL FOR HYDRAULIC-PACK PISTON | 1 | |
| I-24744 | PRESSURE GAUGE 0 TO -1.0 BAR | 1 | |
| IAE1N20023 | ADAPTOR, TORQUE - THRUST REVERSER, PRESSURE RELIEF LATCHES | 17 | |
| IAE1N20412 | ADAPTOR, PRESSURISING | 1 | |
| IAE1N20417 | ADAPTER - PRESSURIZING. | 1 | |
| IAE1N20419 | ADAPTOR, PRESSURISING | 1 | |
| IAE1R18209 | FIXTURE, GRINDING - HP COMPRESSOR, STAGE 6 VARIABLE STATOR VANES | 1 | |
| IAE1R18252 | COVER-COMPRESSOR REAR OUTER CASE | 1 | |
| IAE1R18282 | RIGGNG HP COMPRESSR LOCATE VSV ACTUATR | 24 | |
| IAE1R18593-1 | V2500 TUBE REPAIR KIT PRESSURE TOOLING KEY AUDIT PURPOSE | 1 | |
| IAE1R18757 | CART - OIL, PRESSURIZED 50 PSI (345 KPA) MAX,10 GALLON (38 LITER) CAP | 12 | |
| IAE1R18891 | RIGGNG HP COMPRESSR LOCATE VSV ACTUATR | 23 | |
| IAE1R18892 | PIN, RIGGING - HP COMPRESSOR, LOCATE IGV'S | 11 | |
| IAE1R18893 | RIGGING PIN HP COMPRESSOR | 11 | |
| IAE1R18894 | PIN, RIGGING - HP COMPRESSOR, LOCATE STAGE 4 VSVS | 13 | |
| IAE1R18895 | PIN, RIGGING - HP COMPRESSOR, LOCATE STAGE 5 VSVS | 11 | |
| IAE1R19786 | Pipe, Pressure test | 6 | |
| IAE2J12602 | FIXTURE, PRESSURE TEST | 1 | |
| IAE2J12603 | FIXTURE, PRESSURE TEST | 1 | |
| IAE2J12604 | FIXTURE, PRESSURE TEST | 1 | |
| IAE2J12610 | FIXTURE PRESSURE TEST | 1 | |
| IAE2J12610A | PRESSURE TEST FIXTURE | 1 | |
| IAE2J13319 | ADAPTOR, PRESSURE TEST | 1 | |
| IAE2P16243 | ADAPTER, PRESSURE TEST | 1 | |
| IAE2P16245 | ADAPTER, PRESSURE TEST | 1 | |
| IAE2P16246 | PLUG, PRESSURE TEST | 1 | |
| IAE2P16250 | PLUG, PRESSURE TEST | 1 | |
| IAE2P16257 | PLUG PRESSURE TEST | 1 | |
| IAE2P16367 | ADAPTER, PRESSURE TEST | 1 | |
| IAE2R18938 | COMPRESSION WAVE ULTRASONIC PROBE, TYPE 0-5-FB | 1 | |
| IAE3J13173 | PRESS, HAND | 1 | |
| IAE3J13232 | HAND PRESS PEENING FIX | 1 | |
| IAE4J12034 | V2500 HP COMPRESSOR LOCKING TOOL | 15 | |
| IAPL4101-4 | ANVIL PRESS STYLE PROOF LOAD TOOL | 1 | |
| IDCT4101-12 | Drill Press Cutting Tool similar to RKC4101-12 | 1 | |
| IDCT4101-4 | Drill Press Mounted CutterTool for bearing MS14101-4 | 1 | |
| IDCT4101-6 | Drill Press Cutting Tool for Bearing MS14101-6, MS14103-6. | 1 | |
| IDCT4103-10 | Drill Press Cutting Tool for Bearing MS14103-10 | 1 | |
| IDCT4103-12 | Drill Press Cutting Tool for Bearing MS14103-12 | 1 | |
| IDCT4103-5 | DRILL PRESS CUTTING TOOL FOR BEARING MS14103-5 | 1 | |
| IDCT4103-6 | Drill Press Cutting Tool for Bearings MS14101-6 and MS14103-6 ** RKC4103-6 is equivalent to IDCT4103-6** | 1 | |
| IDCT4103-8 | DRILL PRESS CUTTING TOOL FOR BEARING MS14103-8 | 1 | |
| IDST-ASBY6-112 | DRILL PRESS | 1 | |
| IDST-BACB10AG22-G | DRILL PRESS | 1 | |
| IDST-BACB10FH05G | DRILL PRESS TRI-ROLLER SWAGING TOOL TO SUIT BACB10FH05G BEARING | 1 | |
| IDST-BACB10FH07G | DRILL PRESS | 1 | |
| IDST-M81936/1-22R | DRILL-PRESS TRI ROLLER SWAGING TOOL FOR BEARING M81936/1-22R | 1 | |
| IDST-P24490 | DRILL PRESS SWAGING TOOL | 2 | |
| IDST-S302T001-702 | DRILL PRESS SWAGGING TOOL | 1 | |
| IDST-S302T001-821 | DRILL PRESS SWAGGING TOOL | 1 | |
| IDST-S302T001-824 | DRILL PRESS SWAGGING TOOL | 1 | |
| IDST2128 | Drill Press Tri-Roller Swaging Tool for Bearing 412--010-427-101 | 2 | |
| IDST2153 | DRILL PRESS | 2 | |
| IDST2311 | Drill Press Tri-Roller Swaging Tool to Equivalent RST2311 | 1 | |
| IDST2345 | Drill Press Tri-Roller Swaging Tool for Bearing 412-310-400-107 ** Technical Equivalent For RST2345 ** | 2 | |
| IDST2420 | DRILL PRESS | 1 | |
| IDST2425 | DRILL PRESS | 2 | |
| IDST2459 | DRILL PRESS TRI-ROLLER SWAGING TOOL EQUIVALENT TO | 2 | |
| IDST2521 | DRILL PRESS | 1 | |
| IDST2523 | DRILL PRESS | 1 | |
| IDST2567 | DRILL PRESS | 1 | |
| IDST2634 | DRILL PRESS | 1 | |
| IDST2765 | DRILL PRESS | 1 | |
| IDST2832 | Drill Press Mounted Tri-Roller Swaging Tool Equivalent to RST2832 | 2 | |
| IDST4101-10 | Drill Press Tri-Roller Swaging Tool for Bearing MS14101-10. Equivalent to RST1013 | 1 | |
| IDST4101-12 | DRILL PRESS TRI-ROLLER SWAGING TOOL FOR BEARING MS14101-12 | 2 | |
| IDST4101-14 | Drill Press Tri-Roller Swaging Tool for Bearing MS14101-14 | 2 | |
| IDST4101-3 | Drill Press Tri-Roller Swaging Tool for Bearing MS14101-3 | 2 | |
| IDST4101-4 | DRILL PRESS SWAGING TOOL | 1 | |
| IDST4101-6 | Drill Press Tri-Roller Swaging Tool for Bearing MS14101-6, MS14103-6 | 2 | |
| IDST4101-9 | TOOL, DRILL PRESS SWAGING | 1 | |
| IDST4103-12 | DRILL PRESS TRI-ROLLER SWAGING TOOL | 1 | |
| IDST4103-3 | DRILL PRESS | 2 | |
| IDST4103-5 | DRILL PRESS | 1 | |
| IDST4103-8 | DRILL PRESS TRI-ROLLER SWAGING TOOL | 1 | |
| IDST4103-9 | DRILL PRESS | 2 | |
| IDST4104-6 | DRILL PRESS | 1 | |
| IKD-6T | PRESSURE TRANSMITER | 1 | |
| ILP-500 | ARBOR PRESS MODEL ILP500 | 1 | |
| IMPV225GA | AIR PRESSURE HOSE 25 | 1 | |
| IND-999-447 | PRESSURE REGULATOR LP | 1 | |
| IND-999-448 | PRESSURE REGULATOR HP | 1 | |
| INDICATOR 0-100 METRIC TONS | HYDRAULIC PRESSURE INDICATOR | 1 | |
| IPIR4101-9 | PRESSING | 1 | |
| IPIR4103-9 | PRESSING | 1 | |
| IPR 0125 | HOSE ASSEMBLY PNEUMATIC, HIGH PRESSURE | 1 | |
| IPST-M81936/1-24 | DRILL PRESS | 1 | |
| IPST-M81936/1-24R | DRILL PRESS | 1 | |
| IPST4241 | TOOL, DRILL PRESS SWAGING | 1 | |
| IRV-4-T-260 | HIGH PRESSURE RELIEF VALVE (VENDOR: GENERANT, TOOLPART OF PN: C36001-64) | 1 | |
| IS31 | PRESSURE CALIBRATOR 2BAR | 1 | |
| IS33 | PRESSURE CALIBRATOR 20/200 BAR | 1 | |
| ISO 5171 | PRESSURE GAUGE | 1 | |
| IT83-008-03E | SENSOR - TIRE PRESSURE, SMARTSTEM (TPS) HANDHELD READER | 1 | |
| ITCT12986-01 | LOCKING TOOL LOW PRESS.ROTOR | 1 | |
| ITCT7494 | LOCKING TOOL LOW PRESS.ROTOR | 1 | |
| J 27076-6 | PRESSURE SWITCH ADAPTER ASSY NLG | 8 | |
| J-24015-4 | PRESSURE GAUGE 60 PSI | 1 | |
| J-AXLE-PHA | PRESSURE-HOSE-KIT-FOR-J-AXLE | 2 | |
| J1785701 | GREASE GUN (high pressure,air op) | 1 | |
| J20135000 | PRESSURE SENSOR | 1 | |
| J20135000/B | PRESSURE SENSOR | 1 | |
| J21003-1 | Platform - Maintenance, Fire Extinguishing Bottles And Positive Pressure Relief Valve Removal/Installation | 12 | |
| J21003-2 | Platform - Maintenance, Press Relief Valve | 3 | |
| J21003-23 | Maintenance platform-fire extinguishing bottles/positive pressure relief valve | 4 | |
| J21003-24 | Maintenance platform-fire extinguishing bottles/positive pressure relief valve | 1 | |
| J21850 | PRESS ADAPTERS | 1 | |
| J24015 | Press Test Equpt - Engine Generator | 1 | |
| J24015-1 | Pressure Test Equipment - Engine Generators | 11 | |
| J24015-2 | PRESSURE TEST EQUIPMENT - ENGINE GENERATORS | 7 | |
| J24015-23 | PRESSURE TEST EQUIPMENT - ENGINE GENERATORS | 6 | |
| J24015-24 | Pressure test assy | 1 | |
| J24015-3 | PRESSURE TEST EQUIPMENT - ENGINE GENERATORS | 2 | |
| J24015-4 | PRESSURE TEST ASSY | 1 | |
| J24015-5 | PRESSURE TEST ASSY | 1 | |
| J24015-6 | PRESSURE TEST ASSY | 1 | |
| J25009-1 | AIR FLOW REGULATOR - PNEUMATIC PRESSURE TEST, OFFWING ESCAPE SLIDE | 6 | |
| J25016-1 | PNEUMATIC PRESSURE TEST, OFF-WING ESCAPE SLIDE | 3 | |
| J26005-24 | CARGO FIRE EXTINGUISHING HALON DISTRIBUTION PRESSURE TEST | 1 | |
| J26005-32 | AIR SOURCE - REGULATED, DRY, FILTERED 0-150 PSIG WITH PRESSURE GAUGE | 4 | |
| J26009-1 | AIR SOURCE - REGULATED, DRY, FILTERED 0-150 PSIG WITH PRESSURE GAUGE | 3 | |
| J26009-16 | AIR SOURCE - REGULATED, DRY, FILTERED 0-150 PSIG WITH PRESSURE GAUGE | 7 | |
| J27052 | ADAPTER-SIDE GUST SUPPRESSION LEAK TEST | 1 | |
| J27052-1 | ADAPTER - SIDE GUST SUPPRESSION LEAK TEST | 11 | |
| J27052-2 | ADAPTOR-SIDE GUST SUPRESSION LEAK TE | 1 | |
| J27061-2 | COMPRESSION EQPT | 1 | |
| J27076 | TEST ASSY-PRESSURE SWITCH,NOSE GEAR | 1 | |
| J27076 - 10 | TEST ASSEMBLY - PRESSURE SWITCH, NOSE GEAR | 10 | |
| J27076-1 | TEST ASSEMBLY - PRESSURE SWITCH, NOSE GEAR | 2 | |
| J27076-10 | TEST ASSEMBLY - PRESSURE SWITCH, NOSE GEAR | 10 | |
| J27076-10 ALBO -1 | TEST ASSY - PRESSURE SWITCH, NOSE GEAR | 1 | |
| J27076-11 | TEST ASSEMBLY - PRESSURE SWITCH, NOSE GEAR | 10 | |
| J27076-12 | Pressure Gauge Assy | 1 | |
| J27076-2 | PRESSURE GAUGE ASSY | 1 | |
| J27076-5 | TEST ASSEMBLY - PRESSURE SWITCH, NOSE GEAR | 6 | |
| J27076-6 | ADAPTOR ASSEMBLY (PART OF J27076-5 TEST ASSEMBLY-PRESSURE SWITCH, NOSE GEAR) | 8 | |
| J270765 | TEST ASSY- PRESS SWITCH NOSE GEAR | 6 | |
| J28005-13 | PRESSURE GAUGE | 1 | |
| J28007 | Pressurization Equipment - Wing Dry Bay, Fuel Leak | 1 | |
| J28007-09 | PRESSURIZATION EQPT -0 WING DRY BAY, LEAK DETECTION | 1 | |
| J28007-1 | PRESSURIZATION EQUIPMENT - WING DRY BAY, FUEL LEAK DETECTION | 1 | |
| J28007-10 | PRESSURIZATION EQUIPMENT - WING DRY BAY, FUEL LEAK DETECTION | 1 | |
| J28007-11 | PRESSURIZATION EQUP | 4 | |
| J28007-9 | PRESSURIZATION EQUIPMENT - WING DRY BAY, FUEL LEAK DETECTION | 4 | |
| J28015-1 | TEST EQUIPMENT - LEAK AND PRESSURE, AUXILIARY TANK FUEL LINE SHROUD | 1 | |
| J28017-1 | ADAPTER EQUIPMENT - DRY BAY PRESSURIZATION, WING | 6 | |
| J29005-1 | PLUG SET - PRESSURE TEST, HYDRAULIC RESERVOIR ASSEMBLY | 1 | |
| J29005-30 | PLUG SET - PRESSURE TEST, HYDRAULIC RESERVOIR ASSEMBLY | 1 | |
| J31003-1 | PLATFORM MAINTENANCE , FIRE EXT BOTTLE AND POSITIVE PRESS RELIEF VLV R/I | 1 | |
| J32015-1 | RIGGING EQUIPMENT - NLG "NOT COMPRESSED" SENSORS | 7 | |
| J32037-106 | SPRING COMPRESSOR | 19 | |
| J32060 | VALVE -DRAIN SHOCK STRUT FLUID PRESSURE GAUGE 0-3000PSI | 2 | |
| J32075-7 | COMPRESSION PLATE ASSEMBLY | 1 | |
| J32075-8 | SPRING COMPRESSOR ASSEMBLY | 1 | |
| J32084-10 | Portable Press Assembly | 1 | |
| J36007-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 2 | |
| J36007-2 | PRESSURE TEST EQUIPMENT - DUCT | 1 | |
| J36008-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| J36009-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 2 | |
| J36010-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 2 | |
| J36011-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| J36012-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| J36013-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| J36014-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| J36015-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 2 | |
| J36015-1-M | PRESSURE TEST EQPT | 1 | |
| J36016-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| J36018-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| J36019-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| J36025-1 | PRESSURE TEST ADAPTER- HPSOV/PRSOV/FAMV | 1 | |
| J38001 | PRESSURIZATION EQPT-WASTE DRAIN SYSTEM | 1 | |
| J38001-16 | PRESSURIZATION EQUIPMENT - WASTE DRAIN SYSTEM | 8 | |
| J38001-16-M | PRESSURIZATION EQPT | 1 | |
| J38001-17 | PRESSURE CONTOL ASSY | 1 | |
| J38001-20 | PRESSURIZATION EQUIPMENT - WASTE DRAIN SYSTEM | 8 | |
| J3800116 | EQUIPMENT - PRESSURISATION | 8 | |
| J38004-72 | PRESSURE GAUGE WITH NIST & CAL CERTS | 1 | |
| J46012 | PRESS PAD | 1 | |
| J46013 | PRESS PAD | 1 | |
| J46014 | PRESS PAD | 1 | |
| J46015 | PRESS PAD | 1 | |
| J46021 | PRESS PAD | 1 | |
| J46022 | PRESS PAD | 1 | |
| J46023 | PRESS PAD | 1 | |
| J46026 | PRESS PAD | 1 | |
| J46027 | PRESS PAD | 1 | |
| J46048 | PRESS PAD | 1 | |
| J46063 | PRESS PAD BUSH | 1 | |
| J46067 | PRESS PAD | 1 | |
| J46070 | PRESS PAD | 1 | |
| J46071 | PRESS PAD | 1 | |
| J46089 | PRESS PAD BASE ASSEMBLY | 1 | |
| J46094 | PRESS PAD BUSHES | 1 | |
| J46095 | PRESS PAD BUSHES | 1 | |
| J46096 | PRESS PAD BUSHES | 1 | |
| J46097 | PRESS PAD BUSHES | 1 | |
| J46099 | PRESS PAD BASE | 1 | |
| J46101 | PRESS PAD | 1 | |
| J46103 | PRESS PAD | 1 | |
| J46106 | PRESS PAD | 1 | |
| J46111 | PRESS PAD | 1 | |
| J46134 | PRESS PAD | 1 | |
| J46136 | PRESS PAD | 1 | |
| J46152 | PRESS PAD | 1 | |
| J46153 | PRESS PAD | 1 | |
| J46156 | CROWFOOT ADAPTER FOR PRESSURE INDICATOR VALVE | 1 | |
| J46163 | PRESS PAD | 1 | |
| J47094 | Compression Tool | 2 | |
| J47175 | Compression Tool | 2 | |
| J47176 | COMPRESSION TOOL | 1 | |
| J47177 | COMPRESSION FIXTURE | 3 | |
| J47309 | COMPRESSION TOOL | 1 | |
| J47660 | COMPRESSION TOOL | 1 | |
| J47947 | COMPRESSION TOOL | 1 | |
| J52026-1 | COMPRESSION EQUIPMENT - BULK CARGO DOOR COUNTERBALANCE SPRING | 8 | |
| J52031-1 | TOOL - SPRING COMPRESSION, PASSENGER ENTRY DOORS | 2 | |
| J52031-1-M | SPRING COMPRESSION EQPT | 1 | |
| J53003-1 | MAINTENANCE PLATFORM EQUIPMENT - PRESSURE BULKHEAD ACCESS | 3 | |
| J53003-174 | MAINTENANCE PLATFORM EQUIPMENT - PRESSURE BULKHEAD ACCESS | 2 | |
| J53003-199 | MAINTENANCE PLATFORM EQUIPMENT - PRESSURE BULKHEAD ACCESS | 1 | |
| J53003-200 | MAINTENANCE PLATFORM EQUIPMENT - PRESSURE BULKHEAD ACCESS | 1 | |
| J53003-201 | MAINTENANCE PLATFORM EQUIPMENT - PRESSURE BULKHEAD ACCESS | 1 | |
| J53003-202 | MAINTENANCE PLATFORM EQUIPMENT - PRESSURE BULKHEAD ACCESS | 1 | |
| J53003-235 | Maintenance Platform Eqpt - Press. Bulkhead Access | 4 | |
| J53003-236 | Maintenance Platform Eqpt - Press. Bulkhead Access | 4 | |
| J6252 | 0-160 PSI GAUGE - CABIN PRESSURE AIR TESTER GAUGE | 2 | |
| J7678PJE | GAUGE, PRESSURE, GLYCERINE FILLED, 3000 - MFG: MARSH INSTRUMENTS COMPANY - P/N# J7678PJE | 1 | |
| J78003-29 | COMPRESSION BEAM ASSY | 1 | |
| J78003-30 | COMPRESSION BEAM | 1 | |
| J78022-7 | COMPRESSION BAR | 1 | |
| J7858P | GAUGE, PRESSURE 0-300 PSI SS LIQUID FILLED 1/4 IN BOTTOM CONNECTED 2-1/2 IN DIA WITH PSI/ KPA DUAL SCALE. - MFG: MAR - P/N# J7858P | 1 | |
| JAK136 | CABIN PRESSURE SWITCH ADAPTER | 2 | |
| JAW500GZ | TIRE PRESSURE CHECK TOOL | 1 | |
| JBP484 | PRESSURE GAUGE | 1 | |
| JDB200X | BAROMETER PRESSURE INDICATOR | 1 | |
| JDP-15MF | 15" FLOOR DRILL PRESS WITH A 3/4 HP MOTOR AND A VARIABLE SPEED RANGE. | 1 | |
| JEADASH8005 | PRESSURE REG RELIEF VALVE TOOL | 1 | |
| JEP-GF | PRESSURE GAUGE 0-160 psi | 1 | |
| JHW8V38R | PRESSURE RELIEF VALVE | 1 | |
| JHW9A55T06 | 55T SHOP PRESS AIR PUMP | 1 | |
| JHW9A55T13 | 55T SHOP PRESS AIR PUMP | 1 | |
| JHW9E100T10 | 100T SHOP PRESS ELEC PUMP | 1 | |
| JHW9E55T06 | 55T SHOP PRESS ELEC PUMP | 1 | |
| JHW9E55T13 | 55T SHOP PRESS ELEC PUMP | 1 | |
| JHW9H55T06 | 55T SHOP PRESS HAND PUMP | 1 | |
| JIC10F | PRESSURE BLANK | 1 | |
| JIC10M | PRESSURE BLANK | 1 | |
| JIC4F | PRESSURE BLANK TOOL | 1 | |
| JIC4M | PRESSURE BLANK | 1 | |
| JIC5F | PRESSURE BLANK | 1 | |
| JIC5M | PRESSURE BLANK | 1 | |
| JIC6F | PRESSURE BLANK | 1 | |
| JIC6M | PRESSURE BLANK | 1 | |
| JIC8F | PRESSURE BLANK | 1 | |
| JIC8M | PRESSURE BLANK | 1 | |
| JKV15GC | PRESSURE GAUGE, 15 PSIG | 1 | |
| JLA321C | FITTING ADAPTOR,PRESSURE | 3 | |
| JM-2900 | PRESSURE GAUGE | 1 | |
| JMP / CFM56 / D / 4777 / C200 | JUNIPER 2 X 25 50 GALLON MULTI ENGINE COMPRESSOR WASH RIG | 3 | |
| JMP-CF34-D-6000 | PROBE, CF34-10E COMPRESSOR WASH | 2 | |
| JMP-CF34-D-6553 | ENGINE COMPRESSOR WASHING RIG PROBE | 4 | |
| JMP-CFM56-D-1535-C200 | ENGINE COMPRESSOR WASHING RIG | 2 | |
| JMP-CFM56-D-4777 | PUMPING UNIT, COMPRESSOR CLEANING WITH HOSE JMP-CF34-D-6000 | 1 | |
| JMP-CFM56-D-4777-C200 | WASHING RIG, COMPRESSOR | 3 | |
| JMP/ CFM56/D/4777/C200 | 2 X 25 GALLON COMPRESSOR WASH RIG | 3 | |
| JMP/AGT/D/6003 | Mobile Compressor Cleaning Rig | 1 | |
| JMP/AGT/D/6003/C200 | Mobile Compressor Cleaning Rig | 1 | |
| JMP/AGT/D/6004 | Mobile Compressor Cleaning Rig | 1 | |
| JMP/APACHE/D/4979 | Apache Compressor Wash Rig | 1 | |
| JMP/CF34/D/6000 | ENGINE COMPRESSOR WASHING RIG PROBE | 2 | |
| JMP/CF34/D/6553 | ENGINE COMPRESSOR WASHING RIG PROBE | 4 | |
| JMP/CF6/A/4087 | COMPRESSOR,TWIN HOSE ASSEMBLY | 1 | |
| JMP/CF6/D/4038 | 50 (2 X 25) GALLON ENGINE COMPRESSOR WASH RIG STANDARD VOLTAGE 115V/200V 400HZ FOR USE WITH AIRCRAFT | 1 | |
| JMP/CF6/D/4038/C200 | CART, COMPRESSOR WASH | 1 | |
| JMP/CFH56/D/4777 | COMPRESSOR WASHER | 1 | |
| JMP/CFH56/D/4777/C200 | COMPRESSOR WASHER | 1 | |
| JMP/CFM56/D/1535/C200 | CFM56 Compressor Washing Rig c/w 2 set CFM56-3 | 2 | |
| JMP/CFM56/D/1535/C300 | CFM56 Compressor Washing Rig c/w RR Tooling | 1 | |
| JMP/CFM56/D/1535/C400 | CFM56 Compressor Washing Rig c/w 1 set CFM56-3 | 1 | |
| JMP/CFM56/D/1535/C600 | CFM56 Compressor Washing Rig c/w 1 set CFM56-7 | 1 | |
| JMP/CFM56/D/1535/C800 | CFM56 Compressor Washing Rig | 1 | |
| JMP/CFM56/D/4462 | COMPRESSOR WASH NOZZLE | 5 | |
| JMP/CFM56/D/4777 | WATER WASH RIG 2 X 25 GALLON COMPRESSOR | 1 | |
| JMP/CFM56/D/4777/C200 | 2 x 25 Gallon Compressor Wash Rig - Part No. JMP/CFM56/D/4777/C200 | 3 | |
| JMP/CFM56/D/4777/C200. | GALLON COMPRESSOR WASH RIG | 3 | |
| JMP/CFM56/D/4777/C400 | 2X25 GALLON MULTI-ENGINE COMPRESSOR WASHING RIG | 1 | |
| JMP/COUG/D/2046 | Cougar Lightweight Compressor Wash Rig | 1 | |
| JMP/CWR/D/6828 | 18 Litre Compressor Washing Rig | 1 | |
| JMP/CWR/D/6828/C200 | 18 Litre Compressor Washing Rig | 1 | |
| JMP/CWR/D/6828/C300 | 18 Litre Compressor Washing Rig | 1 | |
| JMP/EH/D/0760/C400 | Compressor Wash Insulated Rig | 1 | |
| JMP/GE90/D/4038 | CART - WATER WASH ENGINE COMPRESSOR WASHING RIG | 1 | |
| JMP/GE90/D/4038/C200 | ENGINE COMPRESSOR WASH RIG | 1 | |
| JMP/GE90/D/4038/C200 | COMPRESSOR WASHING RIG | 1 | |
| JMP/GE90/D/4599 | COUGAR LIGHTWEIGHT COMPRESSOR WASH RIG | 1 | |
| JMP/GENX/B/6957 | PRESSURE REDUCTION BOX | 1 | |
| JMP/GENX/D/7235 | HIGH CAPACITY COMPRESSOR WASH RIG | 1 | |
| JMP/HER/D/1144/C600 | JUNIPER 2X25 GALLON UNIVERSAL COMPRESSOR WASHING RIG | 1 | |
| JMP/LUFT/4972/C500 | COMPRESSOR WASH UNIT | 1 | |
| JMP/LUFT/D/4972/C200 | AIRCRAFT COMPRESSOR WASHCART | 1 | |
| JMP/LUFT/D/4972/C300 | TURBINE COMPRESSOR WASHIN RIGS | 1 | |
| JMP/LUFT/D/4972/C500 | COMPRESSOR WASHING RIG | 2 | |
| JMP/LUFT/D/4972/C800 | COMPRESSOR WASH | 1 | |
| JMP/LUT/D/4972/C500 | 2 X 50 GALLON COMPRESSOR WASHING RING | 1 | |
| JMP/PT6/D/0787 | Compressor Wash Rig | 1 | |
| JMP/PW/A/6798 | Various Turboprop Aircraft Compressor washing adaptor for P&W 100 series engines | 1 | |
| JMP/PW/D/1705 | ENGINE WASH PROBECOMPRESSOR WASH & FUEL NOZZLE CLEANING RIG | 2 | |
| JMP/PW/D/1705 | Compressor Wash and Fuel Nozzle Cleaning Rig | 2 | |
| JMP/RB211/D/4153 | COMPRESSOR WASH PROBE | 1 | |
| JMP/SHWR/D/0376/C800BH | Chinook Compressor Wash Rig | 1 | |
| JMP/T800/D/4796 | T800 Compressor Wash Rig | 1 | |
| JMP/T800/D/4796/C500 | COMPRESSOR WASH RIG FOR PW100 SERIES | 1 | |
| JMP/TRENT/D/4702 | COMPRESSOR WASHING PROBE | 4 | |
| JMP/TRENT/D/6754 | COMPRESSOR WASH PROBES (LONG) | 1 | |
| JMPCF34D6000 | ENGINE COMPRESSOR WASHING RIG PROBE | 2 | |
| JMPCF34D6553 | PROBE, CF34 COMPRESSOR WASH | 4 | |
| JMPCF6D4038 | COMPRESSOR WASH CART | 1 | |
| JMPCF6D4732 | ENGINE COMPRESSOR WASH RIG - JUNIPER | 1 | |
| JMPCFM56D4435 | PROBE, ENG COMPRESSOR WASH | 2 | |
| JMPCFM56F1535C600 | PORTABLE COMPRESSOR WASHING RIG | 1 | |
| JMPRB211D4153 | COMPRESSOR WASH PROBE | 1 | |
| JOBCARDC-407 | RESERVOIR PRESS KIT TOOL | 1 | |
| JPS030 | AIR OPERATED PRESSURE SPRAYER | 1 | |
| JT8D-217C | PRESSURE/DUMP HOSE | 1 | |
| K-1037 | Tronair K-1037 DeHavilland Dash 7 Compressor Washer Adapter | 4 | |
| K-1057 | Tronair K-1057 Garrett TPE311 Compressor Washer Adapter | 7 | |
| K-1152 | Tronair K-1152 Pratt & Whitney PT-6A Compressor Washer Adapter | 7 | |
| K-1243 | ADAPTER, ENG COMPRESSOR WASH | 6 | |
| K-1243 | ENGINE COMPRESSOR WASHER ADAPTER KIT FOR CESSNA CARAVAN AIRCRAFT | 6 | |
| K-1263 | Kit, Repl. Pressure Gauge | 2 | |
| K-1269 | Tronair K-1269 Beech King Air 200 Compressor Washer Adapter | 2 | |
| K-1285 | PRESSURIZATION ADT KIT | 6 | |
| K-1286 | ADAPTER KIT FOR PRESS TEST | 4 | |
| K-1288 | CABIN PRESSURE CART ADAPTER | 3 | |
| K-1357 | Tronair K-1357 Saab 340 Compressor Washer Adapter | 5 | |
| K-1381 | KIT: ADAPTER,CABIN PRESSURE, PIPER PA31T,AEROSTAR,OTHER | 3 | |
| K-1410 | Tronair K-1410 Replacement Compressor Washer Hose Assembly | 4 | |
| K-1411 | Tronair K-1411 Replacement Compressor Washer Wand Assembly | 5 | |
| K-1416 | PRESSURE FILTER | 4 | |
| K-1418 | PRESSURE FILTER ASSE | 5 | |
| K-1623 | KIT: ADAPTER,CABIN PRESSURE, AERO COMMANDER | 2 | |
| K-1660 | CABIN PRESSURIZATION ADAPTER | 1 | |
| K-1709 | Tronair K-1709 DeHavilland DHC-6 Twin Otter Compressor Washer Adapter | 1 | |
| K-1710 | Tronair K-1710 Bombardier Canadair Challenger & CRJ100 Compressor Washer Adapter | 6 | |
| K-1953 | Tronair K-1953 Rolls-Royce (Allison) 250-C20J & Bell 206B-JR3 Compressor Washer Adapter | 5 | |
| K-1991 | Kit, Repl. Pressure Gauge | 1 | |
| K-2106 | KIT, LOW PRESSURE REGULATOR | 5 | |
| K-2107 | KIT, HIGH PRESSURE NITROGEN REGULATOR | 3 | |
| K-2182 | ADAPTER KIT FOR PRESSURIZATION TESTER | 4 | |
| K-2248 | ENGINE COMPRESSOR WA | 7 | |
| K-2419 | Tronair K-2419 High Pressure Strut Service Connector | 8 | |
| K-2601 | TRONAIR K-2601 – AIRCRAFT CABIN PRESSURIZATION UNIT ADAPTER KIT – CESSNA, JETSTREAM, & IAI ASTRA | 4 | |
| K-2610 | CABIN PRESSURIZATION UNIT ADAPTER KIT | 4 | |
| K-2714 | Tronair K-2714 DeHavilland Dash-8 100300 Compressor Washer Adapter | 5 | |
| K-2741 | KIT, HI PRESS REG REPAIR | 2 | |
| K-2745 | KIT, HI PRESS REG REPAIR | 2 | |
| K-3202 | Tronair K-3202 Citation X Compressor Washer Adapter | 1 | |
| K-3262 | KIT, LOW PRESS REG REPAIR | 2 | |
| K-3492 | KIT PRESSURE FILTER ELEMENT | 9 | |
| K-3706 | CONNECTOR - HIGH PRESSURE SERVICING | 16 | |
| K-3803 | Engine Compressor Washer Adapter Kit - Challenger 300 | 4 | |
| K-3979 | Tronair K-3979 Sikorsky S92 Compressor Washer Adapter | 4 | |
| K-4276 | KIT,DIFFERENTIAL PRESSURE GAGE | 3 | |
| K-4281 | PRESSURIZATION TEST, CABINPURPOSE | 1 | |
| K-4464 | Tronair K-4464 Sikorsky S76 Compressor Washer Adapter | 1 | |
| K-4500 | Kit, Engine Compressor Washer Adapter Eurocopter (with Turbomeca Arriel / Makila engines) | 4 | |
| K-4932 | KIT, PRESSURE MANIFOLD | 4 | |
| K-C6B-1M00 | CAPTEUR DE FORCE C6B COMPRESSION 1MN | 1 | |
| K0378 | BOGIE COMPRESSION TOOL | 1 | |
| K10014-1 | PLUG - CABIN AIR COMPRESSOR, RAM AIR AND ALTERNATE VENTILATION SYSTEM INLET | 4 | |
| K10014-2 | PLUG - CABIN AIR COMPRESSOR, RAM AIR AND ALTERNATE VENTILATION SYSTEM INLET | 3 | |
| K10014-3 | PLUG - CABIN AIR COMPRESSOR, RAM AIR AND ALTERNATE VENTILATION SYSTEM INLET | 2 | |
| K1037 | KIT: HOSE ADAPTER,COMPRESSOR WASH, | 4 | |
| K1057 | KIT: ADAPTER,COMPRESSOR WASH, TPE331 | 7 | |
| K1152 | KIT: ADAPTER,COMPRESSOR WASH, PT6 | 7 | |
| K1243 | ADAPTER, ENG COMPRESSOR WASH | 6 | |
| K1286 | KIT: ADAPTER,CABIN PRESSURE, LEAR 25/35 | 4 | |
| K1359 | KIT: ADAPTER,CABIN PRESSURE, CESSNA 421,425,441,LE | 6 | |
| K1360 | KIT: ADAPTER,CABIN PRESSURE, LEAR55 S/N GRTR THAN125,EMB120 | 3 | |
| K1381 | KIT: ADAPTER,CABIN PRESSURE, PIPER PA31T,AEROSTAR,OTHER | 3 | |
| K1622 | KIT: ADAPTER,CABIN PRESSURE, FALCON 10,20,50,50EX,900,900EX | 2 | |
| K1623 | KIT: ADAPTER,CABIN PRESSURE, AERO COMMANDER | 2 | |
| K1710 | KIT-PRESS. WASHER | 6 | |
| K20008 | DIFFERENTIAL PRESSURE GUAGE | 1 | |
| K21006 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-1 | Jack Adapter - Cabin Air Compressor, AC Pack | 1 | |
| K21006-11 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-12 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-13 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-26 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-27 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-36 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-40 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-41 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-46 | JACK ADAPTER - AIR COMPRESSOR, AIR CONDITIONING PACK (CE) | 3 | |
| K21006-47 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-48 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-49 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-5 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-51 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-52 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-53 | JACK ADAPTER - AIR COMPRESSOR, AIR CONDITIONING PACK (CE) | 10 | |
| K21006-53 | JACK ADAPTER-AIR COMPRESSOR,ACPACK | 10 | |
| K21021-1 | DRILL JIG - HEATER LIP, CABIN AIR COMPRESSOR (CAC) INLET | 4 | |
| K21024-1 | DISPATCH DEACTIVATION KIT - POSITIVE PRESSURE RELIEF VALVE | 4 | |
| K2106 | CHARGING KIT - LOW PRESS REGULATOR | 5 | |
| K2107 | KIT: REGULATOR,HIGH PRESSURE | 3 | |
| K24001-10/-126 | Mounting shaft assy/Compression spring | 1 | |
| K24001-126 | Compression Spring | 1 | |
| K25100Z | MATIC PRESSURE REGULATOR MODEL K25100Z | 1 | |
| K26001-3 | PRESSURIZING CAP ASSY | 1 | |
| K2601 | KIT: ADAPTER,CABIN PRESSURE, CESSNA CITATION I,II,V,S/II | 4 | |
| K2741 | KIT: HI PRESS REG REPAIR, | 2 | |
| K28004 | TEST EQPT-LEAK AND PRESSURE,APU FUEL LINE SHROUD | 1 | |
| K28004-1 | TEST EQUIPMENT - LEAK AND PRESSURE, APU FUEL LINE | 5 | |
| K28004-15 | Pressure gauge | 1 | |
| K28004-30 | TEST EQUIPMENT - LEAK AND PRESSURE, APU FUEL LINE | 8 | |
| K28005-1 | TEST EQUIPMENT - SURGE TANK PRESSURE RELIEF VALVE | 9 | |
| K3 | SuperLube Pressure Grease Pump (Capacity: 35 lb Pail) (Add to cart: Contact us to order) | 3 | |
| K32011- 94 | BEARING COMPRESSOR HALF ASSY | 2 | |
| K32011-11 | Bearing compressor half assy | 2 | |
| K32011-94 | Bearing compressor half assy | 2 | |
| K32015-9 | COMPRESSOR ASSY (W/ | 1 | |
| K32044-1 | TEST SUPPORT FIXTURE, TIRE PRESSURE SENSOR (TPS) INSTALLATION | 4 | |
| K32051-1 | COMPRESSION TOOL, RETAINER RING, SHOCK STRUT | 3 | |
| K3262 | KIT: LOW PRESS REG REP, | 2 | |
| K3492 | PRESSURE FILTER | 9 | |
| K35001-31 | Pressure Gauge | 1 | |
| K35001-39 | Pressure Gauge | 1 | |
| K35014-1 | INSTALLATION TOOL, DECOMPRESSION PANEL - BILGE BARRIER | 1 | |
| K3706 | HIGH PRESSURE CONNECTOR | 16 | |
| K38003-8 | Pressure gauge | 1 | |
| K4276 | KIT: PRESSURE GAUGE, DIFFERENTIAL | 3 | |
| K4618 | GAUGE: DIGITAL TIRE PRESSURE | 1 | |
| K4644 | KIT: RETURN BACKPRESSURE, | 1 | |
| K47003 | EQUIPMENT-NGS MOTOR DRIVEN COMPRESSOR REMOVAL AND INSTALLATION | 1 | |
| K47003-1 | EQUIPMENT - NITROGEN GENERATION SYSTEM MOTOR DRIVEN COMPRESSOR, REMOVAL AND INSTALLATION (CE) | 9 | |
| K47003-10 | EQUIPMENT-NGS MOTOR DRIVEN COMPRESSOR REMOVAL AND INSTALLATION | 1 | |
| K47003-14 | EQUIPMENT-NGS MOTOR DRIVEN COMPRESSOR REMOVAL AND INSTALLATION | 1 | |
| K47003-15 | EQUIPMENT-NGS MOTOR DRIVEN COMPRESSOR REMOVAL AND INSTALLATION | 1 | |
| K47003-16 | EQUIPMENT-NGS MOTOR DRIVEN COMPRESSOR REMOVAL AND INSTALLATION | 1 | |
| K47003-18 | EQUIPMENT-NGS MOTOR DRIVEN COMPRESSOR REMOVAL AND INSTALLATION | 1 | |
| K47003-19 | EQUIPMENT-NGS MOTOR DRIVEN COMPRESSOR REMOVAL AND INSTALLATION | 1 | |
| K47003-2 | EQUIPMENT-NGS MOTOR DRIVEN COMPRESSOR REMOVAL AND INSTALLATION | 1 | |
| K47003-20 | EQUIPMENT-NGS MOTOR DRIVEN COMPRESSOR REMOVAL AND INSTALLATION | 1 | |
| K47003-21 | EQUIPMENT-NGS MOTOR DRIVEN COMPRESSOR REMOVAL AND INSTALLATION | 1 | |
| K47003-22 | EQUIPMENT-NGS MOTOR DRIVEN COMPRESSOR REMOVAL AND INSTALLATION | 1 | |
| K47003-25 | EQUIPMENT-NGS MOTOR DRIVEN COMPRESSOR REMOVAL AND INSTALLATION | 1 | |
| K47003-26 | EQUIPMENT-NGS MOTOR DRIVEN COMPRESSOR REMOVAL AND INSTALLATION | 1 | |
| K47003-27 | EQUIPMENT-NGS MOTOR DRIVEN COMPRESSOR REMOVAL AND INSTALLATION | 1 | |
| K47003-3 | EQUIPMENT-NGS MOTOR DRIVEN COMPRESSOR REMOVAL AND INSTALLATION | 1 | |
| K47003-4 | EQUIPMENT-NGS MOTOR DRIVEN COMPRESSOR REMOVAL AND INSTALLATION | 1 | |
| K47003-9 | EQUIPMENT-NGS MOTOR DRIVEN COMPRESSOR REMOVAL AND INSTALLATION | 1 | |
| K4932 | KIT: MANIFOLD,PRESSURE, | 4 | |
| K4VAF3/20/PI | PRESSRE SWITCH 10 TO 100 BAR | 1 | |
| K5-PREMIUM | CLEANING PRESSUR WASHER | 1 | |
| K500 | PRESSURE GAUGE TO UNISON IGNITION TEST SYSTEM | 1 | |
| K50600-100 | PRESSURE COMPENSATOR ADJ KIT, | 2 | |
| K50660-100 | KIT, PRESSURE COMPENSATOR ADJ. | 1 | |
| K51004-1 | BOND TEST EQUIPMENT - STANDOFFS, PRESSURE DECK HEAT SHIELDS | 1 | |
| K5166 | KIT, HPU BACKPRESSURE, | 2 | |
| K52005-79 | Spring Compression Assy | 1 | |
| K52010 | TOOL SPRING COMPRESSION PASSENGER ENTRY DOORS | 1 | |
| K52010-1 | COMPRESSION SET - SPRING, PASSENGER ENTRY DOORS | 8 | |
| K52010-2 | COMPRESSION ASSY-LATCH GAS SPRING | 1 | |
| K52010-3 | COMPRESSION ASSY-HANDLE GAS SPRING | 1 | |
| K52012-1 | PRESSURE LEAK TEST E | 6 | |
| K52021 | COMPRESSION EQUIPMENT - BULK CARGO DOOR SPRING | 1 | |
| K52034-1 | WEIGHT COMPRESSION T | 5 | |
| K52045-1 | SPRING COMPRESSION EQUIPMENT - LATCH PROBE INSTALLATION, BULK CARGO DOOR | 1 | |
| K53001 | MAINTENANCE PLATFORM EQUIP. - PRESSURE ACCESS | 1 | |
| K53001-1 | PLATFORM EQUIPMENT - PRESSURE BULKHEAD ACCESS | 4 | |
| K53001-151 | PLATFORM EQUIPMENT - PRESSURE BULKHEAD ACCESS | 3 | |
| K530013-1 | TORSION SPRING LOCK- PRESSURE RELIEF DOOR | 1 | |
| K53013-1 | TORSION SPRING LOCK - PRESSURE RELIEF DOOR | 1 | |
| K53014-1 | INSTALLATION TOOL-DECOMPRESSIO | 5 | |
| K552786 | LOW PRESSURE SYSTEM LEAK TESTER | 1 | |
| K7-67 | MACNAUGHT K7-67 PORTABLE HIGH PRESSURE MANUAL GREASING GUN | 2 | |
| K96842-2 | COVER, PITOT PRESSURE PUMP, | 1 | |
| KARCHER HDS 10/20 | KARCHER HOT WATER PRESSURE WASHER HDS 10/20-4M 420V | 1 | |
| KARCHER HDS 8/18-4C | HIGH PRESSURE CLEANER | 1 | |
| KARCHER PEQUEÑA | PRESSURER WASHER SMALL | 1 | |
| KBPED3A | DUAL PRESSURE SOURCE | 1 | |
| KC-45 | MILL/DRILL PRESS INDUSTRIAL | 1 | |
| KELLER LEO2 | DIGITAL PRESSURE GAUGE | 1 | |
| KHC-1009 | PRESSURE FILL CART | 5 | |
| KHC-1011 | KIT - COUPLING HYDRAULIC, PRESSURE AND RETURN | 7 | |
| KHC-1858 | PRESSURE AND SUCTION END KHC-1858 (TRONAR) | 4 | |
| KHC-2173 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 10 | |
| KHC-2424 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 7 | |
| KHC-3559 | CONNECTIONS FOR LOW AND HIGH PRESSURE HPU | 2 | |
| KHC-3560 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 4 | |
| KHC-3561 | HYDRAULIC PRESSURE & RETURN ADAPTERS | 3 | |
| KHC-3651 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 3 | |
| KHC-3747 | KIT: ADAPTER,HYD COUPLING, PRESSURE | 3 | |
| KHC-3754 | KIT: ADAPTER,HYD COUPLING, PRESSURE | 8 | |
| KHC-4000 | PRESSURE AND RETURN DUAL SYSTEM GT | 3 | |
| KHC1004 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 5 | |
| KHC1005 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 4 | |
| KHC1010 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 3 | |
| KHC1011 | Coupling Kit − Pressure and Return Hydraulic | 7 | |
| KHC1011M | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 3 | |
| KHC1020 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 1 | |
| KHC1038 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 2 | |
| KHC1042 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 3 | |
| KHC1075 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 2 | |
| KHC1160 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 6 | |
| KHC1306 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 2 | |
| KHC1468 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 3 | |
| KHC1858 | Hydraulic Pressure and Return Coupling Kit | 4 | |
| KHC2173 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 10 | |
| KHC2199 | KIT: ADAPTER,HYD COUPLING, PRESSURE | 4 | |
| KHC2257 | KIT: ADAPTERHYD COUPLING PRESSURE & | 2 | |
| KHC2424 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 7 | |
| KHC2738 | KIT: ADAPTER,HYD COUPLING, PRESSURE | 1 | |
| KHC3558 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 3 | |
| KHC3559 | KIT: ADAPTER,HYD COUPLING, PRESSURE RETURN | 2 | |
| KHC3560 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 4 | |
| KHC3747 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 3 | |
| KHC3754 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 8 | |
| KHC3766 | KIT: ADAPTERHYD COUPLING PRESSURE & RETURN | 3 | |
| KHC3779 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 3 | |
| KHC4000 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 3 | |
| KHC4001 | KIT: ADAPTER,HYD COUPLING, PRESSURE RETURN | 2 | |
| KING FASTENER. | SUPPRESSOR | 1 | |
| KIT | ADAPTERS, 10TH AND 14TH COMPRESSOR STAGE | 1 | |
| KIT 95-92134-0001 | PRESSURE GAUGE 20 BAR | 1 | |
| KIT-NITR0-ACMI-ALT | NITROGEN REGULATOR (HIGH PRESSURE) | 1 | |
| KIT-PRESSU | KIT-PRESSU-AERONEFS | 1 | |
| KIT83-008-01 | TIRE PRESSURE SENSOR | 1 | |
| KIT83-008-01E | TIRE PRESSURE SENSOR | 1 | |
| KIT83-008-02 | TIRE PRESSURE (TPS) HANDHELD READER | 3 | |
| KIT83-008-02E | KIT, TIRE PRESSURE SENSOR HAND HELD READER (120VAC) WITH CHARGER | 1 | |
| KIT83-008-03 | SENSOR - TIRE PRESSURE, SMARTSTEM (TPS) HANDHELD READER | 8 | |
| KIT83-008-03E | SENSOR - TIRE PRESSURE, SMARTSTEM (TPS) HANDHELD READER | 5 | |
| KIT83-008-04 | SENSOR - TIRE PRESSURE, SMARTSTEM (TPS) HANDHELD READER | 1 | |
| KIT83-008-04E | SENSOR - TIRE PRESSURE, SMARTSTEM (TPS), HANDHELD READER | 1 | |
| KM2839 | COMPRESSOR RING | 1 | |
| KMT350237 | GAUGE-PRESSURE (2-1/2 DRY) | 1 | |
| KMT350238 | PRESSURE GAGE | 2 | |
| KMY01 | COM-3862/CART - COMPRESSOR WASHER | 1 | |
| KNFN86KNP | PORTABLE DIAPHRAGM VACUUM/PRESSURE PUMP, 0.21 CFM, 27" HG, 230 VAC | 1 | |
| KPC3-825-8 | Full/static pressure probe cover | 15 | |
| KS12 | COMPRESSOR EQUIPMENT KS12 | 1 | |
| KS18 | COMPRESSOR EQUIPMENT KS18 | 1 | |
| KS5562 | CART - COMPRESSOR CLEANING | 5 | |
| KUNZ 3000.2000 | MULTI LOCK SPRING PRESS | 1 | |
| KW 13-004 | AIR COMPRESSOR | 1 | |
| KW13-07 | AIR COMPRESSOR | 1 | |
| KW1300015 | COMPRESSOR AIR 20 HP 1000L, 8 BAR 380 V, 3PH | 1 | |
| KW15-539 | DRILL PRESS | 1 | |
| KW15-540 | DRILL PRESS MACHINE | 1 | |
| K‐3706 | Connector‐High Pressure Servicing | 16 | |
| L0008 | Drukmeter Cabin Pressure | 1 | |
| L005 | HYDRAULIC PRESSURE TEST KIT | 1 | |
| L133M6205101 | HUB SHAFT BUSHING REPLACEMENT TOOL KIT PRESSOUT/PRESSFITTOOL OR | 1 | |
| L133M6503101 | PRESSING TOOL | 2 | |
| L135M2904101 | PRESSURE GAUGE HYDRAULIC | 1 | |
| L2020 | GREASE COUPLER & Z-SWIVEL 3-JAW HIGH PRESSURE COUPLER | 1 | |
| L2250 | High-Pressure Grease 'Whip' Hoses (Type: Standard) (Overall length: 12" (30.4 cm)) (Add to cart: Item is no longer available.) | 1 | |
| L2260 | High-Pressure Grease 'Whip' Hoses (Type: Standard) (Overall length: 12" (30.4 cm)) (Add to cart: Item is no longer available.) (Type: Standard) (Overall length: 18" (45.7 cm)) (Add to cart: Add To Cart) | 1 | |
| L2556966000000 | PANEL-PRESSURE TEST,CRC | 1 | |
| L290P7002101 | HYDROTECHNIK PRESS. MONITOR | 1 | |
| L290P7003101 | HYDROTECHNIK PRESSURE MONITORING DEVICE PUMP | 1 | |
| L38001-33 | PRESS BLOCK | 1 | |
| L50001T04 | LIGHTWEIGHT HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| L50001T06 | LIGHTWEIGHT HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| L50001T08 | LIGHTWEIGHT HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| L51001T04 | LIGHTWEIGHT HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO ARCSEAL-MALE) | 1 | |
| L51021T04 | LIGHTWEIGHT HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO ARCSEAL-FEMALE) | 1 | |
| L622P3001101 | HUB SHAFT BUSHING REPLACEMENT TOOL KIT PRESSOUT/PRESSFITTOOL OR | 1 | |
| L622P3002101 | BUSHING PRESS IN ADAPTER SET | 1 | |
| L623M4002104D343-01 | PRESSING-IN SET | 1 | |
| L623M4003101D343-01 | PRESS IN TOOL | 1 | |
| L642G1002101 | PRESS IN CUFF BUSHINGS TOOL (SAP CODE 8334910) | 2 | |
| L652G3001121 | PRESS-IN AND PULLING TOOL | 1 | |
| L65723443A | PRESS IN TOOL | 1 | |
| L671M3012101D341-02 | PRESS-FIT TOOL | 1 | |
| L671M3012101D341-03 | PRESS-OUT TOOL | 1 | |
| L671M7003102D341-01 | PRESSING-IN TOOL | 1 | |
| L671M7003102D343-01 | PRESSING-IN TOOL | 1 | |
| L79001-8 | TEST EQUIP-PRESSURE SWITCH OIL FILT | 1 | |
| L95F50-603 | PROTECTOR-OVERPRESSURE | 2 | |
| LAG-3301 | PRESSURE PLATE AND STATOR PLATE | 1 | |
| LAGANA-1 | PRESSURIZATION TEST BENCH | 1 | |
| LC-032E-12 | SPRING COMPRESSION | 1 | |
| LC059G09S | COMPRESSION SPRING | 2 | |
| LC063L-3 | COMPRESSION SPRING | 1 | |
| LC063L03S | COMPRESSION SPRING | 2 | |
| LCM304-10KN | Mini Compression Load Cell 10000N | 1 | |
| LDI32-01 | PRESSURE GAUGE (NITROGEN KIT FOR SHO | 1 | |
| LDI32-40 | KIT BRAKES PRESS. GAGES (8 GAUGES) | 1 | |
| LE01 | DIGITAL PRESSURE GAUGE(1-10BAR) | 3 | |
| LE96901Z01- 17068393001000-14H | SPRING COMPRESSOR-FWD AND AFT PAX & SV DOOR EMB195 | 1 | |
| LE96901Z01-1706839300 | SPRING COMPRESSOR, PASSENGER AND SERVICE DOORS | 1 | |
| LE96901Z01-17068393001 000-14H | SPRING COMPRESSOR, PASSENGER AND SERV-ICE DOORS | 1 | |
| LE96901Z01-17068393001000-14H | SPRING COMPRESSOR, PASSENGER AND SERVICE DOORS | 1 | |
| LE96901Z0117068393001000-14H | SPRING COMPRESSOR, PASSENGER AND SERVICE DOORS | 1 | |
| LEO1 | DIGITAL PRESSURE GAUGE | 3 | |
| LEO2 | DIGITAL PRESSURE GAGE | 3 | |
| LEX1 | HIGH ACCURACY 585 OIL DIGITAL PRESSURE GAUGE | 1 | |
| LF460006499/2 | PRESSPAD | 1 | |
| LFT00645 | PRESSURE REGULATOR 645 | 1 | |
| LG-100N | COMPRESSION TESTER | 2 | |
| LH1414414 | High Pressure Grease Hose (Overall length: 12' (3.5 m)) (Add to cart: Add To Cart) | 1 | |
| LH1430014 | High Pressure Grease Hose (Overall length: 12' (3.5 m)) (Add to cart: Add To Cart) (Overall length: 25' (7.5 m)) (Add to cart: Add To Cart) | 1 | |
| LIV-900 | HEATSHIELD SET, non-pressurized model (set of 5) | 1 | |
| LIV-901 | WINDSHIELD HEATSHIELD, non-pressurized model | 1 | |
| LIV-905 | HEATSHIELD SET, pressurized model (set of 5) | 1 | |
| LIV-906 | WINDSHIELD HEATSHIELD, pressurized model | 1 | |
| LJ-DET-BP-5 | LOW PRESSURE GAUGE | 1 | |
| LJ-DET-BP-7 | PRESSURE REGULATOR | 1 | |
| LJ-DET-HP-3D | LOW PRESSURE GAUGE | 1 | |
| LJ-FLEX-10000-BP | LOW PRESSURE HOSE (10 METERS) | 1 | |
| LJNA 3035 | THREE WAYS PRESSURE REGULATOR | 1 | |
| LJNA3006-GD | PRESSURE CONTROLLER | 1 | |
| LJNA3088-10000-CAF | HIGH/LOW PRESSURE HOSE (10 METERS) | 1 | |
| LL1007A049 | PRESSURE ADAPTOR | 1 | |
| LL2-H-8MS | Coupling Pressure Cowl Pump | 8 | |
| LLA547A114 | SPRING COMPRESSOR | 1 | |
| LM V2 RT1F-0001-009 | Pressure Plate, Top | 1 | |
| LMX2-NA | NATO F/M PRESSURE LIMITER | 1 | |
| LNV | LVV PRESSURE GAUGE | 1 | |
| LOCFAB003 | DEPRESSOR TOOL | 1 | |
| LOW PRESSURE GAUGE | HF SYSTEM LOW PRESSURE GAUGE 0-15PSI | 1 | |
| LP-006-0 | PRESSURE GAUGE | 1 | |
| LP10WR | CONCAVE JAWS PRESSURE PLIERS | 1 | |
| LPG HOSE SET | FABRICATED SET - LOW PRESSURE GAUGE HOSE | 1 | |
| LPR | LOW PRESSURE REGULATOR | 1 | |
| LR1000S | 10:1 Pressure Flow Pump (STUBBY) | 1 | |
| LR1000T | 10:1 Pressure Flow Pump (DRUM) | 1 | |
| LR300S | 3:1 Pressure Flow Pump (Stub) | 1 | |
| LR37940N | PUMP AY-OIL PRESSURE&RETURN | 1 | |
| LS03-05003USBC1 | TOOL-PRESSURE TEST,ACT | 1 | |
| LS125-3000 | LIBERTY PNEUMATICS HYDRAULIC LIQUID FILLED PRESSUR | 1 | |
| LS125-3000 | Liberty Pneumatics Hydraulic Liquid Filled Pressure Gauge 0-3000 PSI | 1 | |
| LSLMV6842 | PRESSURE BRAKE BLEED SYSTEM | 1 | |
| LSLMV7840 | PRESSURE BRAKE BLEED KIT 2.5L | 1 | |
| LTCT 1390 | ADAPTER, COMPRESSOR ROTOR ASSEMBLY | 1 | |
| LTCT 4155 | RING COMPRESSOR | 1 | |
| LTCT 4947 | ARBOR PRESS | 1 | |
| LTCT11395-01 | Compressor, Shaft Torque Spacer | 1 | |
| LTCT11399 | NO-GO GAGE(VANES ON COMPRESSOR IMPELLER) | 1 | |
| LTCT12071-01 | Cradle Assembly, Compressor Rotor Assembly | 1 | |
| LTCT1247-01 | Fixture, Test, Oil Pressure | 1 | |
| LTCT13442 | FIXTURE, PRESSURE CHECK - TUBE ASSY | 1 | |
| LTCT13668-01 | Torque Fixture, Compressor Rotor | 1 | |
| LTCT13781-01 | Tool, Compressing | 1 | |
| LTCT13803 | Damping Ring, Compressor Rotor Assembly | 1 | |
| LTCT1390 | Adapter, Compressor Rotor Assembly | 1 | |
| LTCT1394 | PRESSURE TEST TOOL | 1 | |
| LTCT14514 | 52. STAKING TOOL COMPRESSOR ROTOR | 1 | |
| LTCT14610-01 | Fixture Assembly, Pressure Test Set | 1 | |
| LTCT14647 | PIN PULLER(COMPRESSOR ROTOR) | 1 | |
| LTCT14736-02 | Fixture Assembly, Compressor Rotor Checking | 1 | |
| LTCT1507 | Puller, Mechanical, Sixth Compressor Spacer | 2 | |
| LTCT1516 | Puller, Mechanical, First Compressor Spacer | 1 | |
| LTCT1643 | Drift Assembly, Compressor Blades | 2 | |
| LTCT1644 | Drift Assembly, Compressor Blades | 2 | |
| LTCT197 | Separator, Compressor Disc | 1 | |
| LTCT2048 | COMPRESSOR PINION GEAR HOLDING FIXTURE | 1 | |
| LTCT2146 | Wrench, Sleeve, Compressor Rotor - Assy of | 1 | |
| LTCT2147 | Wrench and Base Assy, Compressor Rotor | 1 | |
| LTCT2147-01 | WRENCH AND BASE ASSY, COMPRESSOR ROTOR | 1 | |
| LTCT25494-01 | Probe Assembly, Nozzle, Inlet Pressure | 1 | |
| LTCT25539-01 | Probe, Pressure | 1 | |
| LTCT25555-01 | Fitting Assembly, No. 4/5 Bearing Scavenge Temperature/Pressure | 1 | |
| LTCT25565-01 | Probe Assembly, Combustor Housing Pressure | 1 | |
| LTCT30835-01 | Fixture, Pressure, Check Tube Assembly | 1 | |
| LTCT3694 | FIXTURE,TEST,PRESSU | 1 | |
| LTCT3880 | Fixture, Centering, Compressor Rotor | 2 | |
| LTCT4051 | STAKING TOOL(FRONT COMPRESSOR SHAFT) | 2 | |
| LTCT4535 | FIXTURE, OIL PRESSURE | 1 | |
| LTCT457 | ARBOR SHAFT COMPRESSOR | 1 | |
| LTCT4875 | FIXTURE,TEST,PRESS | 2 | |
| LTCT5157X | Fixture, Torque, Pressure Nut | 1 | |
| LTCT5448 | Compressor, Spring | 1 | |
| LTCT5455 | Fixture-Centering Compressor Rotor | 1 | |
| LTCT5516 | Vee Block Fixt - Compressor | 1 | |
| LTCT5550x | Fixture, Pressure - T-Meter Valve | 1 | |
| LTCT6641 | Holding Fixture (Compressor Rotor) | 1 | |
| LTCT7217 | Fixture, Pressure Test Bearing Support Assy. | 1 | |
| LTCT7476-01 | Cradle Assembly, Compressor Rotor Assembly | 1 | |
| LTCT7493-01 | Fixture, Test, Pressure, No. 4/5 Bearing | 1 | |
| LTCT7496-01 | Tool-locking HP compressor | 3 | |
| LTCT7508-01 | Fixture, No. 2 Bearing Package Pressure Check | 1 | |
| LTCT7612-01 | Kit, Masking, Compressor First Stage Stator, RTV | 1 | |
| LTCT7660-01 | Tool Assembly, Compressor Blades Installation | 1 | |
| LTCT7844-01 | Bearing, Press Sleeve Set | 1 | |
| LTCT7902-01 | Torque Fixture, Compressor Rotor Shaft | 1 | |
| LTCT7905-01 | Compressor Shaft Stretch Rest Plate | 1 | |
| LTCT7950-01 | Fixture, Test, Pressure | 1 | |
| LTCT7969-01 | Tool, Compression, Bypass Valve Spring | 1 | |
| LTCT9071 | Gage, Pressure, Dial Indicating | 1 | |
| LTCT9374 | SWITCH, PRESSURE | 1 | |
| LV507 | HIGH PRESSURE PIPE 4000 MM | 1 | |
| LVU-6501 | COMPRESSOR | 1 | |
| LW92007 | RING COMPRESSOR DISK | 1 | |
| Lagana-1 | Pressurization Test Bench | 1 | |
| M/18K-L/LG/TS | FLAIG 0-18 BAR (0-270 PSI) PRECISION PRESSURE GAUGES FOR AIRCRAFT 0-18 BAR (0-270 PSI) | 1 | |
| M03-6001-0-B8-0K0-400-2-1-Z-1-007 | PRESSURE GAUGE DM17 | 1 | |
| M0DEL-AMS | PRESSURE GAUGE (0-6000PSI) | 1 | |
| M0DEL16 | TOOL: TENSION COMPRESSOR | 1 | |
| M1-10BAR-BSP | PRESSURE GAUGE | 1 | |
| M16-B | COUPLING PRESSURE CO | 1 | |
| M21 | HYDRAULIC PRESSURE PUMP | 1 | |
| M210V4000103 | PULLEY COMPRESSOR RIGGING KIT | 1 | |
| M21802 | Compression Fixture | 8 | |
| M21818 | Lower Pin Compress Tool | 9 | |
| M21836 | Compression Fixture | 2 | |
| M21946 | COMPRESSION TOOL | 1 | |
| M21987 | COMPRESSION TOOL SPRING WASHERS | 1 | |
| M3540C | ADAPTOR COMPRESSION | 1 | |
| M3545C | ADAPTOR GLOW PLUG COMPRESSION | 1 | |
| M3564C | COMPRESSION GM 6.2L DIESEL | 1 | |
| M3565C | ADAPTOR GLOW PLUG COMPRESSION | 1 | |
| M3566C | COMPRESSION TOYOTA NISSAN | 1 | |
| M3576C | ADAPTOR GLOW PLUG COMPRESSION | 1 | |
| M3584C | CUMMINS 8.3L COMPRESSION ADAPT | 1 | |
| M3M | PRESSURE GAUGE | 1 | |
| M46175 | COMPRESSION TOOL FOR SPRING | 1 | |
| M46175-1000 | COMPRESS TOOL | 1 | |
| M46226 | COMPRESSION TOOL FOR SPRING | 4 | |
| M46343 | COMPRESSION TOOL ACTUATOR SPRING | 2 | |
| M56954A0000-01 | LEE PRESS IN FIXTURE | 1 | |
| M56957A0000-01 | LEE PRESS IN MANDREL | 1 | |
| M57203A0000-01 | PRESS OUT MANDREL | 1 | |
| M57551A0000-01 | PRESS IN MANDRIL | 1 | |
| M57588A0000-01 | PRESS-IN TOOL | 1 | |
| M57628A0000-01 | PRESS IN MANDRIL | 1 | |
| M57725A0000-01 | PRESS IN SLEEVE | 1 | |
| M57728A0000-01 | PRESS IN MANDREL | 1 | |
| M57864A0000-01 | PRESS IN FIXTURE | 1 | |
| M57879A0000-01 | PRESS IN AND PRESS OUT TOOL | 1 | |
| M58246A0000-01 | PRESS IN FIXTURE | 1 | |
| M58314A0000-01 | PRESS IN MANDREL | 1 | |
| M58331A0000-01 | PRESS IN FIXTURE | 1 | |
| M58420A0000-01 | PRESS IN FIXTURE | 1 | |
| M58421A0000-01 | PRESS OUT FIXTURE | 1 | |
| M58568A0000-01 | PRESS IN FIXTURE | 1 | |
| M58569A0000-01 | PRESS IN FIXTURE | 1 | |
| M58598A0000-01 | PRESS IN FIXTURE | 1 | |
| M58599A0000-01 | PRESS OUT FIXTURE | 1 | |
| M59070A0000-01 | PRESS IN MANDREL | 1 | |
| M59403A0000-01 | PRESS-OUT FIXTURE | 1 | |
| M600P10 | PRESSURE GAUGE | 1 | |
| M601-913.9 | MIRROR FOR COMPRESSOR BLADES INSPECTION | 1 | |
| M65723281 | PRESSURE LOSS TEST TOOL | 10 | |
| M65724023 | PRESS IN TOOL | 1 | |
| M65724042 | ACTUATOR SPRING COMPRESSION TOOL | 1 | |
| M65724042 (NP) - M65724294 or M65725603 | Actuator spring compression tool | 1 | |
| M65724291 | COMPRESSION TOOL | 1 | |
| M65725103 | COMPRESSION TOOL | 1 | |
| M65725103A | COMPRESSION TOOL | 1 | |
| M65725325 | Press Tool | 1 | |
| M65725362 | COMPRESSION TOOL | 1 | |
| M65725379 | SPECIAL TOOL - ACM COMPRESSOR ADAPTER | 2 | |
| M65725510 | COMPRESSION TOOL | 1 | |
| M65725529 | COMPRESSION TOOL | 1 | |
| M65725594 | COMPRESSION TOOL | 1 | |
| M65725603 | Actuator Spring Compression Tool | 1 | |
| M65725717-7 | COMPRESSION SPRING | 1 | |
| M65725741-010 | COMPRESSION TOOL | 1 | |
| M65725741-020 | COMPRESSION TOOL | 1 | |
| M65725786 | COMPRESSION TOOL | 1 | |
| M65725793 | COMPRESSION TOOL | 1 | |
| M65725811 | COMPRESSION TOOL | 1 | |
| M65726006 | COMPRESSING TOOL | 1 | |
| M65726006-010 | COMPRESSING TOOL | 1 | |
| M65726006-020 | COMPRESSING TOOL | 1 | |
| M65726006-030 | COMPRESSING TOOL | 1 | |
| M65726006-050 | COMPRESSING TOOL | 1 | |
| M65726006-1 | COMPRESSING TOOL | 1 | |
| M65726006-2 | COMPRESSING TOOL | 1 | |
| M65726006-3 | COMPRESSING TOOL | 1 | |
| M65726006-4 | COMPRESSING TOOL | 1 | |
| M70 | PRESSURE GAGE 20 BAR / 290 PSI | 1 | |
| M7005108SN001 | PRESSURE DDV TEST BENCH | 1 | |
| M82000200B | PRESSURE VALVE TESTING | 1 | |
| M82000335 | PRESSURE EXTENSION | 2 | |
| M82000448 | PRESSURE PORT | 1 | |
| M82000491 | PRESSURE PORT TOOL | 1 | |
| M82000612 | PRESSURE PORT | 1 | |
| M82000704 | PRESSURE VALVE TESTING | 1 | |
| M82100022-010 | PRESSURE PORT | 1 | |
| M82100025-010 | CABIN PRESSURE FITTING | 1 | |
| M82100055 | PRESSURE ADAPTOR | 1 | |
| M82100055-060 | PRESSURE PORT | 1 | |
| M82100083-020 | PRESSURE PORT | 1 | |
| M8348 B1A | GAUGE , TIRE PRESSURE (GAUGE CASE) | 1 | |
| M8348-B-1 | TIRE PRESSURE GAGE | 1 | |
| M8348-B1A | GAGE,PRESSURE,DIAL | 1 | |
| M85352/3-1 | GAGE,PRESSURE,DIAL INDICATING | 1 | |
| M85352/3-2 | MILTON GOVERNMENT - HIGH PRESSURE GAGING ELEMENT - 50-600 PSI | 1 | |
| M87800020 | COMPRESSOR WHEEL BALANCING | 1 | |
| MA-10 | PRESSURE GAUGE | 1 | |
| MA-1465 | DIGITAL PRESSURE GAUGES - 0 A 100 PSI ( 0 A 7 KGFM/CM2) | 1 | |
| MA-4 | PRESSURE GAUGE | 1 | |
| MA0030004000PSI | 0-4000 PSI PRESSURE GAUGE - H | 1 | |
| MA0100000400PSI | 0-400 PSI PRESSURE GAUGE | 1 | |
| MA0107V10139805 | PRESSIOMETRE | 1 | |
| MA100 | PRESSURE GAUGE | 1 | |
| MA280004-1 | TEST EQUIPMENT-LEAK/PRESSURE, AERIAL REFUELING SYSTEM | 1 | |
| MA280004-99 | TEST EQUIPMENT, LEAK AND PRESSURE, APU SHROUD | 1 | |
| MA2800064-1 | TEST SET - BACKPRESSURE, BOOM HYDRAULIC SYSTEM | 1 | |
| MA280025-95 | TEST EQUIPMENT - PRESSURE/LEAKAGE, BODY FUEL TANKS | 1 | |
| MA280058-1 | KIT, LEAK TEST, NEADS PRESSURE | 1 | |
| MA280064-1 | TEST SET - BACKPRESSURE, BOOM HYDRAULIC SYSTEM | 1 | |
| MA280071-1 | DRAIN EQUIPMENT, HYDRAULIC PUMP, PRESSURE SENSOR LINE | 1 | |
| MA280078-1 | DRAIN EQUIPMENT, HYDRAULIC PUMP, PRESSURE SENSOR L | 1 | |
| MA2DIA100 | BOURDON PRESSURE INDICATOR | 1 | |
| MA350001-1 | LEAK TEST SET, CREW OXYGEN PRESSURE | 1 | |
| MA350001-46 | LEAK TEST SET, CREW OXYGEN PRESSURE | 1 | |
| MACH-6 | PRESSURE CAP - QUICK DISCONNECT | 1 | |
| MAE-T92719 | GOOSENECK BRAKE PRESS. TEST KIT (8PCS.) | 1 | |
| MAE-T92720 | GOOSENECK BRAKE PRESS. TEST KIT (8PCS.) | 1 | |
| MAFIS | Mitutoyo MAFIS - Mafis-Express - Aerofoil Inspection Software | 1 | |
| MANO 0/100 | PRESSURE GAUGE 0 TO 100 PSI | 1 | |
| MANO 0/4500 | PRESSURE GAUGE 0 TO 4500 PSI | 1 | |
| MANO 0/550 | PRESSURE GAUGE FROM 0 TO 550 PSI | 1 | |
| MAR95731 | VALVE PRESSURE SPRING | 1 | |
| MAUKA 74386625-0 | FLUKE PRESSURE CALIBRATION | 1 | |
| MBEU11015PA | PACKING PRESS-PARACHUTE | 1 | |
| MBEU205121 | PARACHUTE PACKING PRESS 110 VOLT | 1 | |
| MBEU57829 | ADAPTER, TEST-HPRU PRESSURE INLET | 1 | |
| MC-7 | COMPRESSOR UNIT,ROTARY | 1 | |
| MC280005-1 | TEST EQUIPMENT - PRESSURE/LEAKAGE, AERIAL REFUEL SYSTEM | 1 | |
| MC280006-175 | TEST EQUIPMENT - PRESSURE/LEAKAGE/VACUUM, AUXILIARY FUEL SYSTEM | 1 | |
| MC280006-182 | TEST EQUIPMENT - PRESSURE/LEAKAGE/VACUUM, AUXILIARY FUEL SYSTEM | 1 | |
| MC280006-2 | TEST EQUIPMENT - PRESSURE/LEAKAGE/VACUUM, AUXILIARY FUEL SYSTEM (INCLUDES PRESSURE TEST BENCH ONLY) | 1 | |
| MC960005-119 | TESTER-PRESS CONTAINER LEAKAGE | 1 | |
| MCA2/MC2A/27391 | HP/LP/COMPRESSOR | 1 | |
| MCI09510645 | MODEL 00 DRAKE ARBOR PRESS | 1 | |
| MCS1216N-P480 | DISPLAY AND THERMOMETER SET FOR WASHING MACHINE COMPRESSOR VIVAER | 1 | |
| MD-05-00-00 | PRESSURE CONTROLLER | 1 | |
| MD02-20-00 | PRESSURE REDUCER | 1 | |
| MD13-80-16 | PRESSURE GAGUE 0 to 16 bar | 1 | |
| MD13-80-60 | PRESSURE GAGUE 0 to 600 bar | 1 | |
| MD13-81-00 | PRESSURE GAGUE 0 to 100 bar | 1 | |
| MD13-82-50 | PRESSURE GAGUE 0 to 250 bar | 1 | |
| MD13-84-00 | PRESSURE GAGUE 0 to 400 bar | 1 | |
| ME1A315 | COMPRESSION SPRING | 1 | |
| ME5050 | GAUGE, OIL PRESSURE, 0-125 PSI | 1 | |
| ME65B50263 | EQUIPMENT - TEST, PRESSURE LEAK, PASSENGER OXYGEN SYSTEM (LOW PRESSURE) | 6 | |
| ME65B50263-1 | EQUP. - TEST, PRESSU | 9 | |
| ME65B50263-2 | EQUIPMENT - TEST, PRESSURE LEAK, 0-60 PSI | 2 | |
| ME65B50263-4 | PRESSURE HOSE ASSY | 2 | |
| METRON AIRCRAFT MODEL 350 | PECISION PRESSURE GAUGE TESTER 0-100PSI 0-2000PSI | 1 | |
| MEX2-F20.B22 | PRESSURE GAUGE 0-10 BAR | 1 | |
| MEX5-D62.H21/0133 | ANALOG PRESSURE GAUGE - 0 - 100 PSI | 1 | |
| MF012-21-00 | PRESSURE GREASING TOOL KIT | 1 | |
| MG1-30-A-9V-R | DIGITAL PRESSURE GAUGE | 1 | |
| MG1-5-A-9V-R | PRESSURE GAUGE | 1 | |
| MG130483-1 | PRESSURE GUAGE ASSY | 1 | |
| MGA-30-A-9V-R | DIGITAL PRESSURE GAUGE | 2 | |
| MGA-300-A-9V-R | DIGITAL PRESSURE GAUGE | 2 | |
| MGI-30-A-9V MGA-30-A-9V-R | DIGITAL PRESSURE GAUGE | 1 | |
| MGR-63-N-6000 | PRESSURE GAUGE 0-6000 PSI | 1 | |
| MH12730 | PRESSURE BLANK | 1 | |
| MH12731 | ADAPTOR - PRESSURE TEST | 1 | |
| MH14187 | PRESSURE BLANK | 1 | |
| MH16185-1 | LP COMPRESSOR CASE | 1 | |
| MH16186 | Pressure Pad | 1 | |
| MH16186-1 | LP COMPRESSOR CASE | 1 | |
| MH16187-1 | PRESSURE PAD | 1 | |
| MH16442 | PLATE - PRESSURE, LARGE | 1 | |
| MH16443 | PLATE - PRESSURE, SMALL | 1 | |
| MH16596 | PRESSURE PAD | 1 | |
| MH16631 | PAD PRESSURE | 1 | |
| MH16632 | PAD PRESSURE | 1 | |
| MHHM-HPL020 | Nitrogen Low Pressure Regulator | 1 | |
| MIL-C-52980 | COMPRESSOR UNIT, REC | 1 | |
| MIL-DTL-26666 | HOSE ASSEMBLY PNEUMATIC, HIGH PRESSURE | 1 | |
| MIL-H-5593-4-156-1OE | ADAPTER HOSE CABIN PRESSURIZATION SAFETY VALVE - TEST KIT | 1 | |
| MIL-H-87884-02 | HOSE-HYDRAULIC HIGH PRESSURE-2M | 1 | |
| MIL-H-87884-10 | HOSE-HYDRAULIC HIGH PRESSURE | 1 | |
| MIL-H-87944-01 | PNEUMATIC HIGH PRESSURE HOSE | 1 | |
| MIL-H-87944-10 | A332 PNEUMATIC HIGH PRESS' HOSE | 1 | |
| MIL-PRF-27210G | OXYGEN PRESSURE SOURCE 0 TO 100 PSIG | 1 | |
| MIL-PRF-27401 TYPE 1 GRADE B | NITROGEN-GASEOUS, PRESSURIZING, 99.5 PERCENT PURE CONSUMBALE | 1 | |
| MIL-PRF-83766 SAU E6550 SAU 9701A | FILLER AND PRESSURIZATION UNIT, HYDRAULIC SYSTEM | 1 | |
| MIT340A5006-1 | NGS PRESSURE TEST TOOL KIT | 1 | |
| MIT340N5002-1 | MISCELLANEOUS TOOL NGS PRESSURE TOOL | 1 | |
| MIT65B04252-1 | KEEPER - COMPRESSION SPRING ASSEMBLY, BULK CARGO DOOR LATCH | 1 | |
| MIT65B07993-950 | Misc Tool, Press Flo | 1 | |
| MIT65B41608 | DIFF. PRESSURE GAUGE | 2 | |
| MIT65B82568 | ADAPTER - PRESSURE RELIEF VALVE, RETRACT ACTUATOR, WING LANDING GEAR | 2 | |
| MIT65B82591 | TOOL - COMPRESSION, CAP RING, NOSE GEAR STEERING ACTUATOR | 1 | |
| MIT65B90315 | ADAPTER EQUIPMENT - LOAD TEST, PRESSURE RELIEF DOOR LATCH | 4 | |
| MK3 | HIGH PRESSURE GAUGE | 1 | |
| MK7-ATIS-002 | TIRE PRESSURE GAUGE | 6 | |
| MK7-ATIS-GBC-GH | TIRE INFLATOR WITH PRESSURE GAUGE 350 PSI | 4 | |
| MK7AT1SGBC-GH | PRESSURE GAUGE | 1 | |
| MK7ATIS-002 | PRESSURE GAUGE | 6 | |
| MK7ATIS-002EL | GAUGE - TIRE PRESSURE, 0-300 PSIG (0-2069 KPA), /- 3 PSIG ACCURACY | 3 | |
| MK7ATIS-002EL-EPRV | TIRE INFLATION TOOL W/EXCESS PRESSURE RELIEF VALVE | 1 | |
| MK7ATIS-003 | PRESSURE GAUGE - CHECK | 1 | |
| MK7ATISGBC-GH | TIRE INFLATOR WITH PRESSURE GAUGE 350 PSI | 4 | |
| MKZPPC250-25 | HOFFER NEUSON COMPRESSOR PART | 1 | |
| MLD-PG-150 | PRESSURE GAUGE 150PSI 3/8 NPT BACK CONNECTION | 1 | |
| MLGC01 | HYDRO Strut Compression Tool | 2 | |
| MLK609400 | PRESS AND PULL SLEEVE KIT | 1 | |
| MLT1063A | COMMERCIAL HIGH PRESSURE GAUGE | 1 | |
| MLT1064A | COMMERCIAL HIGH PRESSURE GAUGE | 1 | |
| MMG060-01 | ADAPTER FOR PRESSURE GREASING(TO-27-349) | 1 | |
| MMG060-02 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-04 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-05 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-12 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-19 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-22 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-23 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-24 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-25 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-29 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-31 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-32 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-33 | ADAPTER FOR PRESSURE GREASING(TO-27-349) | 1 | |
| MML2D20B19 | TOOL INDICATOR PRESSURE | 1 | |
| MNR R900034510 HED 8 0A12/50K14KW REXROTH | PRESSURE SWITCH | 1 | |
| MOA-P122-AA | COMPRESSOR VACUUM PUMP | 1 | |
| MODEL 150 | COMPRESSION RIVETER | 5 | |
| MODEL 2311 | TORQUE SYSTEM PRESSURE TESTER | 1 | |
| MODEL 2311FA | TORQUE SYSTEM PRESSURE TESTER (BARFIELD INC.) | 1 | |
| MODEL 30 | ARBOR PRESS | 1 | |
| MODEL 370 | DIGITAL PRESSURE GAUGE | 1 | |
| MODEL 4000 | BENCH,PORT PRESS VACUUM TEST,MODEL 4000 BENCH,PORT PRESS VACUUM TEST | 1 | |
| MODEL 4005 | HAND PUMP PRESSURE POT (TRONAIR GSE) | 1 | |
| MODEL 5014 | MECHANICAL PUMP PRESSURE BLEEDER | 1 | |
| MODEL 512 | HIGH PRESSURE V/V FOR N2 & O2, WORKING PRESSURE 250 | 1 | |
| MODEL 565 SPEC NO 256013 | TIRE PRESSURE GUAGE (0~300 PSI) | 1 | |
| MODEL 600 HC | CART - HYDRANT - PORTABLE BIOCIDE INJECTION: 20-250 GPM - MAX LINE PRESSURE = 100 PSI - INJECTION SYSTEM MIN RATIO 10 PPM - SIZE: 48 IN X 30 IN X 32 IN | 1 | |
| MODEL 661-D/C140 | PRESSURE INDICATOR | 1 | |
| MODEL 70-6 | HYDRAULIC PRESS BRAKE | 1 | |
| MODEL 800 HC | CART - HYDRANT, PORTABLE BIOCIDE INJECTION: 75-700 GPM, MAX LINE PRESSURE = 100 PSI, ADDITIVE INJECTION - MIN RATIO = 10 PPM SIZE: 46 IN X 60 IN X 72 INCH WEIGHT = 1000 LBS | 1 | |
| MODEL 884FY-24 | ADAPTER KIT, 856NM 1/2 PITOT-STATIC TUBE PRESSURE TEST | 1 | |
| MODEL E-2M | DIFFERENTIAL PRESSURE TESTER | 1 | |
| MODEL EB833 | ALTIMETER/BAROMETER (MEASURES TEMPERATURE AND PRESSURE) | 1 | |
| MODEL EP | PRESSURE GAGE 4" DIAL | 1 | |
| MODEL HC600-1P | CART - HYDRANT - PORTABLE BIOCIDE INJECTION: 20-250 GPM - MAX LINE PRESSURE = 100 PSI - INJECTION SYSTEM MIN RATIO 10 PPM - SIZE: 48 IN X 30 IN X 32 IN | 1 | |
| MODEL HC800-1S | CART - HYDRANT, PORTABLE BIOCIDE INJECTION: 75-700 GPM, MAX LINE PRESSURE = 100 PSI, ADDITIVE INJECTION - MIN RATIO = 10 PPM SIZE: 46 IN X 60 IN X 72 INCH WEIGHT = 1000 LBS | 1 | |
| MODEL M | PRESSURE GAUGE | 1 | |
| MODEL NO. 1130 | DIFFERENTIAL PRESSURE GUAGE | 1 | |
| MODEL P104DS | DIFFERENTIAL PRESSURE TRANSDUCER: 1 EACH - 0-5 | 1 | |
| MODEL Q3D | PRESSURE GAUGE | 1 | |
| MODEL SR4J | HIGH PRESSURE REGULATOR | 1 | |
| MODEL150 | COMPRESSION RIVETER | 5 | |
| MODEL884FY-23 | ADAPTER KIT, PITOT-STATIC TUBE PRESSURE TEST. | 1 | |
| MODL E SERIES | PRESSURE GAGE 4" DIAL | 1 | |
| MP-A-25-6-N-O-R-G-R-10/901003900 | MICROPAC PRESSURE TEST SET -HAND PUMP/HOSE ASSY | 1 | |
| MP1 | TESTER, PRESSURE GAGE | 1 | |
| MP50 | TENSION/COMPRESSION FORCE GAUGE | 1 | |
| MPG7601-1 | AIRCRAFT TIRE PRESSURE GAUGE | 1 | |
| MPG76011 | AIRCRAFT PRESSURE GAUGE | 1 | |
| MPN0157 | B737 Water tank Press. Relief Valve test | 1 | |
| MPR2-1 | PRESSURE REGULATOR, 0-15 PSI, AIR & WATER (DWYER) | 1 | |
| MPR2-3 | PRESSURE REGULATOR, 0-60 PSI, AIR & WATER (DWYER) | 1 | |
| MPR2-4 | PRESSURE REGULATOR, 0-100 PSI, AIR & WATER (DWYER) | 1 | |
| MPS31C | TEST SET - AIR DATA (RVSM COMPLIANT). REPLACES AEROFLEX-JCAIR P/N 01-1046-00 (MODEL MPS-27) AND P/N 01-1047-00 (MODEL MPS-31B) WHICH ARE NO LONGER MANUFACTURED. CONTAINS INTERNAL VACUUM AND PRESSURE SOURCES. | 7 | |
| MPS34C | TEST SET - AIR DATA (RVSM COMPLIANT). REPLACES AEROFLEX-JCAIR P/N 01-1046-00 (MODEL MPS-27) AND P/N 01-1047-00 (MODEL MPS-31B) WHICH ARE NO LONGER MANUFACTURED. CONTAINS INTERNAL VACUUM AND PRESSURE SOURCES | 3 | |
| MPS45 | TEST SET - AIR DATA (RVSM COMPLIANT). REPLACES AEROFLEX-JCAIR P/N 01-1046-00 (MODEL MPS-27) AND P/N 01-1047-00 (MODEL MPS-31B) WHICH ARE NO LONGER MANUFACTURED. CONTAINS INTERNAL VACUUM AND PRESSURE SOURCES. | 4 | |
| MPX4250D | GAUGE PRESSURE SENSOR | 1 | |
| MS21902K8 | HIGH PRESS ADAPTER | 1 | |
| MS21913-10 | STEEL PRESSURE PLUG | 15 | |
| MS21914-10 | CAP, PRESSURE SEAL, FLARELESS | 17 | |
| MS21914-10D | Pressure Cap | 9 | |
| MS21914-12 | CAP,PRESSURE SEAL | 16 | |
| MS21914-14 | Cap，pressure seal，flareless tube fitting | 1 | |
| MS21914-16 | Cap，pressure seal，flareless tube fitting | 8 | |
| MS21914-2 | Cap，pressure seal，flareless tube fitting | 10 | |
| MS21914-20 | Cap，pressure seal，flareless tube fitting | 3 | |
| MS21914-22 | CAP,PRESSURE SEAL,FLARELESS TUBE FITTING | 1 | |
| MS21914-24 | Cap，pressure seal，flareless tube fitting | 4 | |
| MS21914-3 | CAP PRESS & TUBING 16112 | 14 | |
| MS21914-4 | PRESSURE SEAL | 24 | |
| MS21914-4J | Cap，pressure seal，flareless tube fitting | 1 | |
| MS21914-4K | CAP PRESSURE SEAL | 5 | |
| MS21914-4W | CAP, PRESSURE SEAL, FLARELESS | 7 | |
| MS21914-5 | CAP PRESSURE SEAL | 18 | |
| MS21914-5W | Flow Fuse Pressure Cap | 2 | |
| MS21914-6 | CAP, PRESSURE SEAL, FLARELESS | 19 | |
| MS21914-6J | CAP PRESSURE | 1 | |
| MS21914-7 | Cap，pressure seal，flareless tube fitting | 1 | |
| MS21914-8 | CAP ASSY, PRESS-TUBE, FLARELESS | 15 | |
| MS21914-8J | CAP PRESSURE | 1 | |
| MS21914V12P | CAP, PRESSURE SEAL, FLARELESS | 6 | |
| MS21916J10-8 | RETURN PRESS ADAPTER | 1 | |
| MS21921-16 | Cap，pressure seal，flareless tube fitting | 2 | |
| MS21921-20 | Cap，pressure seal，flareless tube fitting | 1 | |
| MS21921-24 | Cap，pressure seal，flareless tube fitting | 1 | |
| MS22058-1 | Military Standard MS22058-1 Adapter, Compressed Gas Cylinder Valve Connections | 2 | |
| MS24585-322 | SPRING HELICAL COMPRESSION | 1 | |
| MS28741-5-1070 | HOSE: MED PRESSURE,RUBBER, | 1 | |
| MS28889-1 | AIR VALVE HIGH PRESSURE 5000PSI | 4 | |
| MS28889-2 | VALVE: AIR STRUT,HIGH PRESSURE | 14 | |
| MS3-02-0001 | PRESSURE TEST KIT | 1 | |
| MS33514-G8 | PRESSURE GAUGE | 1 | |
| MS35842-10 | CLAMP, HOSE, LOW PRESSURE | 3 | |
| MS4001-380 | GAGE PRESSURE | 1 | |
| MS4001645-1 | PRESSURE CHUCK ADAPTER RESERVOIR FWD-AFT SLIDE PN 4A3904 SERIES | 1 | |
| MS4001670-1 | PRESSURE CHUCK ADAPTER POB PN 5500/5600 & 9700/9800 SERIES | 1 | |
| MS4001671-1 | PRESSURE CHUCK ADAPTER MID SLIDE PN 66898-101/102 | 1 | |
| MS4001672-1 | PRESSURE CHUCK ADAPTER OFF WING SLIDE PN 60592-SERIES | 1 | |
| MS4001673-1 | PRESSURE CHUCK ADAPTER POCA PN 3552 SERIES | 1 | |
| MS4001674-1 | PRESSURE CHUCK ADAPTER COB PN 897 SERIES | 1 | |
| MS4001675-1 | PRESSURE CHUCK ADAPTER COB PN B42365-1 | 1 | |
| MS4001676-1 | PRESSURE CHUCK ADAPTER COB PN 806835-01 | 1 | |
| MS4001677-1 | PRESSURE CHUCK ADAPTER COB PN 801307 SERIES | 1 | |
| MS9314-04 | STATIC PRESSURE TUBE CAP | 11 | |
| MS9314-04, | STATIC PRESSURE TUBE CAP | 11 | |
| MS9513-04 | ASSEMBLY - CAP, PRESSURE SEAL, FLARELESS TUBE | 1 | |
| MS9513-04 9 | ASSEMBLY - CAP, PRESSURE SEAL, FLARELESS TUBE | 1 | |
| MSC2 | COIL SPRING COMPRESSOR | 1 | |
| MSG06FMS6E06Z | ADAPTER HOSE HPU PRESSURE | 1 | |
| MSP-1000-303-E | WATER PRESSURE PLUG | 1 | |
| MSP5000 | COMPRESSOR | 1 | |
| MSU-200 SERIES | AIR START, TURBINE COMPRESSOR - CART | 1 | |
| MSU-400 SERIES | AIR START, TURBINE COMPRESSOR - CART | 1 | |
| MT252-1 | BEARING PRESSING TOOL - TAIL ROTOR HUB | 1 | |
| MT27D | UNIVSL CONE COMPRESSION GAGE | 1 | |
| MT329-10 | TUBE-PRESS EXTENSION | 1 | |
| MT516-1 | VALVE SPRING COMPRESSOR TOOL | 1 | |
| MT5252-1 | BEARIMG PRESSING TOOL-TAIL ROTOR HUB | 1 | |
| MT528-1 | C184 BEARING REMOVAL AND INSTALLATION TOOLS (FOR USE WITH HYDRAULIC PRESS) | 2 | |
| MT972-008 | BORO GUIDE TUBE L. PRESS TURB SHROUD | 1 | |
| MTP-160 | PRESSURE GAUGE | 1 | |
| MTP-1M | PRESSURE GAUGE | 1 | |
| MV 18 SB | MANUAL LEVER PRESS (AUTOMATOR LYO) | 1 | |
| MV600SK | HIGH PRESSURE PIPE | 1 | |
| MVIQAP4020 | HIGH PRESSURE PIPE | 1 | |
| MW0450PH | 0-4 BAR PRESS. GUAGE REAR PLASTIC/BRASS 50MM, CLASS 2.5 | 1 | |
| MWUX1851 | COMPRESSION WEDGE | 1 | |
| Model 1403 SOLFRUNT 132594 | PRESSURE GAUGE 6" 0-30 PSI | 1 | |
| Model 1403 SOLFRUNT 132596 | PRESSURE GAUGE 6" 0-100 PSI | 1 | |
| Model 370 | Digital Pressure Gauge | 1 | |
| N/A | Bearing Press | 5 | |
| N04212U030P000 | PRESSURE INDICATOR | 1 | |
| N163115-1-001 | BP AIR PRESS REGULATOR | 1 | |
| N2GEN-HPC-1D | DEPLOYABLE HIGH PRESS N2 CYLINDER | 1 | |
| N2GEN-HPCF-K04 PS | STATION HIGH PRESS N2 CYL FILL STATION | 1 | |
| N9860039133 | GENERATOR,PRESSURE (PITOT STATIC) | 1 | |
| N9881AD29000002000 | tank pressurization tool | 1 | |
| N9881AD29000002001 | A340 tank pressurization tool | 1 | |
| NA1600-2 | HIGH PRESS. TYRE INFATION KIT | 1 | |
| NA386-2 | TYRE PRESSURE GAUGE | 1 | |
| NA3924/1 | PRESSURE REGULATOR | 1 | |
| NA42263/2 | NITROGEN PRESSURE REGULATING UNIT | 1 | |
| NAS77C7-035A | BUSHING,FLANGED, PRESS FIT | 1 | |
| NB13139097 | PRESSURE GAUGE 0-20 BAR, 063 MM SIZ | 1 | |
| NB1504 | PRESSURE GAUGE | 1 | |
| NB160-2W | GAUGE, PRESSURE - WATER (160PSI) | 1 | |
| NB2604 | TYRE PRESSURE GAUGE | 1 | |
| NB2604-5A | IN-LINE PUSH-ON TYRE VALVE ADAPTER, FOR LARGE-BORE 12V TYRE VALVE STEMS (FOR FITMENT TO TYRE PRESSUR | 1 | |
| NB2604-6A | IN-LINE PUSH-ON TYRE VALVE ADAPTER, FOR SMALL-BORE 8V TYRE VALVE STEMS (FOR FITMENT TO TYRE PRESSURE | 1 | |
| NB2604-D | TYRE PRESSURE GAUGE (TPG)260PSI | 2 | |
| NB2604D | TYRE PRESSURE GAUGE | 2 | |
| NB28001-1 | LOW PRESSURE CONTROLLER | 1 | |
| NB28001/1 | LOW PRESSURE CONTROLLER | 1 | |
| NB28051-1 | HIGH PRESSURE CONTROLLER | 1 | |
| NB28051/1 | HIGH PRESSURE CONTROLLER | 1 | |
| NB30-001 | PRESSURE GAUGE | 1 | |
| NB3004-D | PRESSURE GAUGE | 1 | |
| NB3503-10MH | HIGH PRESSURE NITROGEN HOSE, 6000 PSI | 1 | |
| NB3503-5MH | HIGH PRESSURE NITROGEN HOSE, 6000 PSI RATED, 5-METER | 1 | |
| NB3503-9MH02 | 9-METRE OUTLET HOSE (FOR FITMENT TO LOW OR HIGH PRESSURE HOSE REEL) | 1 | |
| NB360-001 | PRESSURE GAUGE (PSI & BAR DIAL) - (0-360PSI) | 1 | |
| NB4004-D | TIRE PRESSURE GAGE | 1 | |
| NB4004LDS | PRESSURE GAUGE LARGE | 2 | |
| NB4504-D | TIRE PRESSURE GAUGE | 1 | |
| NB4504-D-DS | TIRE PRESSURE CHECK GAUGE | 1 | |
| NB5004-D | TYRE PRESSURE GAUGE | 1 | |
| NB70051 | NITROGEN CART 0-400 PSI PANEL MOUNT PRESSURE GUAGE | 1 | |
| NB70052 | NITROGEN CART 0-4000 PSI PANEL MOUNT PRESSURE GUAGE | 1 | |
| NB70054 | PRESSURE SETTING REGULATOR 0-330PSI | 1 | |
| NB70055 | PRESSURE SETTING REGULATOR 0-3300PSI | 1 | |
| NB70059 | AUTO RETRACTING HOSE REEL LOW PRESSURE | 1 | |
| NB70060 | AUTO RETRACTING HOSE REEL HIGH PRESSURE | 1 | |
| NB70099 | HIGH PRESSURE OXYGEN HOSE , 700MM | 1 | |
| NB70243 | HIGH PRESSURE QUICK FIT COUPLING SET | 1 | |
| NB70447 | HIGH PRESSURE OXYGEN HOSE, 3-METER | 1 | |
| NB70459 | DIGITAL TYRE PRESSURE GAUGE | 1 | |
| NBGA1500-F | HIGHPRESSURE REGULATOR 1500PSI | 1 | |
| NBGA3500 | HIGH PRESSURE REGULATOR | 1 | |
| NBGA3500-F | HIGHPRESSURE REGULATOR 3500PSI | 1 | |
| NBNT-2 | 2-BOTTLE EASY LOAD NITROGEN CART KEY INFORMATION (PRESSURE RANGE: DUAL USE 0-300 PSI AND 0 – 3,300 PSI) | 1 | |
| NCK9-4 | HIGH PRESSURE HOSE WITH LENGTH 9MTRS FITTED WITH ¼” BSPT BEE NUT | 1 | |
| NDT 3001 | REF STD AFRUD PRESS BH | 2 | |
| NDT-039 | PRESSURE GAUGE 0-4 ENT | 1 | |
| NDT3001 | PRESSURE BULKHEAD AVANT | 2 | |
| NEO005F-P-06 | 5080 PSI High Pressure Plug | 1 | |
| NEO005F-P-08 | 5080 PSI High Pressure Plug | 1 | |
| NEO005F-P-10 | 5080 PSI High Pressure Plug | 1 | |
| NETECH DIGIMANO 2500 | PRESSURE/VACUUM METER | 1 | |
| NFP25A001BP4N | PRESSURE GAUGE 0-1 BAR | 1 | |
| NI CO100X44ZCA3 | UN1956 COMPRESSED GAS, N.O.S. (NITROGEN, OXYGEN) | 1 | |
| NIFISK ALTO NEPTUNE 7 | NIFISK ALTO NEPTUNE 7 (PRESSURE WASHER) | 1 | |
| NIL | CENTRALIZED COMPRESSOR | 1 | |
| NITROGEN TANK | COMPRESSED NITROGEN TANK | 1 | |
| NOR78021 | PRESSURE GAUGE | 1 | |
| NOR78022D | 20 TON PRESS | 1 | |
| NOR78058A | SHOP PRESS 50T | 1 | |
| NOV-98 | BEARING PRESSING TOOL | 1 | |
| NOV-99 | BEARING PRESSING SUPPORT | 1 | |
| NP-1911-0401 | INDICATOR NEEDLE EXTRACTOR PRESSU | 1 | |
| NP60-0386-00 | COMPRESSION RING | 1 | |
| NPTK240359 | FIRE EXT PRESSURE TEST KIT | 1 | |
| NS09IND01025 | OTC 5059A SPRING COMPRESSOR | 1 | |
| NS09IND01028 | OTC 6057 SPRING COMPRESSOR DSC | 1 | |
| NSA855010GV08 | COUPLING ADAPTER, PRESSURE TEST, ACT | 2 | |
| NT132 | AIR PRESS GAGE AND CONTROL | 1 | |
| NT864 | RACK PRESS FOR PUNCH AND BASE TOOL | 1 | |
| NTG-2604-D | GAUGE - TIRE PRESSURE, (UNIVERSAL) | 6 | |
| NTG-5004-D | TIRE PRESSURE GAUGE | 3 | |
| NTG-BA-5004-D | PRESSURE GAUGE - TYRE | 1 | |
| NTG2604 | TYRE PRESSURE INFLATOR | 1 | |
| NTG2604-001 | GAGE - PRESSURE, TIRE | 1 | |
| NTG2604-002 | GAGE - PRESSURE, TIRE | 1 | |
| NTG2604-D | A/C TYRE PRESSURE CHECK GAUGE | 6 | |
| NTG2604-D-DS | TYRE PRESSURE GAUGE | 1 | |
| NTG2604-DF | TYRE PRESSURE GAUGE | 1 | |
| NTG2604-HH1L | ANALOGUE TIRE PRESSURE GAUGE | 1 | |
| NTG2604-L | TYRE PRESSURE GAUGE | 1 | |
| NTG2604-S | AIRCRAFT TYRE PRESS GUAGE | 5 | |
| NTG2604-S-DF | TYRE PRESSURE GUAGE | 2 | |
| NTG2604-S-DS | TIRE PRESSURE GAUGE | 1 | |
| NTG2604D | TYRE PRESSURE GAUGE | 6 | |
| NTG2604DF | TYRE PRESSURE GAUGE | 1 | |
| NTG2604G | PRESSURE GAUGE | 1 | |
| NTG2604HH1 | ANALOGUE TIRE PRESSURE GAUGE | 1 | |
| NTG2604MSB | PRESSURE GAGE,TIRE | 3 | |
| NTG2604S | TYRE PRESSURE GAUGE (0-260PSI) | 5 | |
| NTG2604SDF | TYRE PRESSURE GAUGE | 2 | |
| NTG3004-001 | TYRE PRESSURE GAUGE | 1 | |
| NTG3004-5 | TIRE PRESSURE GAUGE | 1 | |
| NTG3004-D | TIRE PRESSURE GAUGE SET 300 PSI | 3 | |
| NTG3004-D | TYRE PRESSURE GAUGE 0 – 300 PSI (NEWBOW AEROSPACE) | 3 | |
| NTG3004-S | TIRE PRESSURE GAUGE 300 PSI | 1 | |
| NTG4004-D | TIRE PRESSURE GAUGE | 1 | |
| NTG4004-HH1 | TYRE PRESS GAUGE | 1 | |
| NTG4004-L | 400 PSI TYRE PRESSURE CHECK GAUGES | 1 | |
| NTG5004 | TIRE PRESSURE GAUGE | 1 | |
| NTG5004-D | PRESSURE GAUGE | 3 | |
| NTG5004-D-DS | TYRE PRESSURE GAUGE | 1 | |
| NTG5004-D. | PRESSURE GAUGE | 3 | |
| NTG5004-HH1 | PRESSURE GAUGE 500 PSI | 1 | |
| NTG5004-HH1L | TIRE PRESSURE GAUGE | 1 | |
| NTG5004-L | TIRE PRESSURE GAUGE 500PSI | 1 | |
| NTG5004D | TYRE PRESSURE GAUGE | 3 | |
| NTG5004DF | TYRE PRESSURE GAUGE | 1 | |
| NTGPC-002 | END ADAPTER - TYRE PRESS. GAUGE | 1 | |
| Netech Dìgimano 2000 | Netech Dìgimano 2000 Precision Pressure/ vacuum Meter Netech Corporation (Use with P/N C2100-19) | 1 | |
| OB-4069-1012 | COMPRESSOR WASH | 1 | |
| OC1265 | TEST SET . HIGH PRESSURE | 1 | |
| OIL PRESSURE TEST FROM FILTER | OIL PRESSURE TEST FROM FILTER | 1 | |
| OLYMPIAN PLUS SPGB/BMR/38262 | COMPRESSED BREATHING AIR FILTER UNIT | 1 | |
| OMG60200 | 20 TON SHOP PRESS | 1 | |
| OMG60253 | SHOPPRESS 25T W/HD PMP | 2 | |
| OMGIMP5506 | 55 TON SHOP PRESS W HAND PUMP | 1 | |
| OMNI2-P2-PA16128 | ELECTTRONIC PROBE, SINGLE COMPRESSIO N, REPLACEABL E MEMBRANE PSLF,0.5MHZ CIRCULAR COMPOSIT- 0.5 " CRYSTAL ALONG WITH CABLE | 2 | |
| OMP2505-6 | Press Cover - Bulkhead | 15 | |
| OMP2506-10 | VALVE, OVERFLOW ANGLED-PRESSURE FILL | 5 | |
| OMP2506-3 | ADAPTER - FILL, IDG OIL SERVICE PRESS QUICK-DISC ADAPTER FOR IDG OIL SERVICE. | 22 | |
| OMP2506-6 | PRESS COVER-BULKHEAD | 10 | |
| OO-P-636 | ARBOR PRESS HAND OPERATED | 1 | |
| OS22467 | PRESS IN GUIDE | 1 | |
| OS22469 | PRESS IN GUIDE | 1 | |
| OS22479 | PRESS IN GUIDE | 1 | |
| OS22480 | PRESS IN GUIDE | 1 | |
| OS22481 | PRESS IN GUIDE | 1 | |
| OS22489 | PRESS IN GUIDE | 1 | |
| OS22829 | Compression | 1 | |
| OS22959 | LOCK-PRESSURIZATION VALVE,REAR,AL | 15 | |
| OS22965E | Press in Guide | 2 | |
| OTC 4572 | DECOMPRESSOR TOOL DELTA HATRACK | 1 | |
| OTC1105 | LONG PRESSURE SCREW | 1 | |
| OTC303-1039 | VALVE SPRING COMPRESSOR | 1 | |
| OTC303-756 | OIL PRESSURE LEAK | 1 | |
| OTC313969 | BALL JOINT PRESS PART | 1 | |
| OTC4572 | VALVE SPRING COMPRESSOR | 1 | |
| OTC4673-5 | 1-1/16IN 1IN OILPRESS UNIT SKT | 1 | |
| OTC518487 | GM TBI FUEL PRESSURE ADAPTER | 1 | |
| OTC6586IN | STRUT SPRING COMPRESSOR | 1 | |
| OTC7045B | SPRING COMPRESSOR | 1 | |
| OTC7248 | HD ANCHOR PIN PRESS | 1 | |
| OTCEN-47971 | ADAPTER.Oil PRESSURE/PRELUBER | 1 | |
| OU-50643 | WRENCH: EXPANSION- COMPRESSION MACHINE WITH RECORDER (AMSLER TYPE) | 1 | |
| OU-50715 | COMPRESSION TOOL | 1 | |
| OU132319 | Compression Fixture | 1 | |
| OU133754 | LOW PRESSURE TEST MOUNTING | 1 | |
| OU190844 | Pressure-off brake release tool | 29 | |
| OU300765 | DEVICE DEVICE - TEST, THSA PRESSURE OF | 7 | |
| OU301682-001 | COMPRESS SPRING BASE | 1 | |
| OXY KIT | OXYGEN SERVICE KIT (HI PRESS REGULATOR HI PRESS OXY HOSE K-3706 SPANNERS | 1 | |
| OXYGEN - OXY250C | OXYGEN,COMPRESSED | 1 | |
| P-1271 | SPRING, COMPRESSION | 1 | |
| P-142 | AEROQUIP HYD PUMP, CAPABLE OF SUPPLYING A SWAGE PRESSURE OF 10,000 ±250 PSI (68947.60 ±1723.69 KPA) | 2 | |
| P-175WD | COMPRESSOR, AIR | 1 | |
| P-28-4-.2500 | PRESS FIT BUSHING .2500ID X 7/16OD X 1/4LG | 1 | |
| P-56-10-.6250 | BUSHING PRESS FIT .6250IDX7/8ODX5/8LG. | 1 | |
| P-56-8-.6250 | BUSHING PRESS FIT .6250ID X 7/8OD X 1/2LG. | 1 | |
| P-RA | KIT FOR 9429M39P02A TELLS YOU TO BUY AJJ-GE17A - PRESSURE RELEASE KNOB - ITEMS 18, 19, 20, 21, 9, AND 22 | 1 | |
| P02 | HI-PRESS MUFFLER | 1 | |
| P067E075 | PRESSURE SWITCH | 1 | |
| P1135 | COMPRESSION SPRING | 2 | |
| P1171 | PRESSURE GAUGE_(0 ~ 3000) PSI (20) ±1.0 %_[P1171] | 1 | |
| P1409 | PRESSURE GAGE(0~3,000PSI) | 1 | |
| P14600-4H | Test Adaptor - pressure head leak chk | 5 | |
| P14600-4H SK146 | TEST ADAPTER, PRESSURE HEAD SEAL KIT | 1 | |
| P185WIR | COMPRESSOR INGERSOLL RAND | 1 | |
| P200 | PRESSURE CALIBRATOR (P200 PRO PLUS-2-0700G-C-HF-E_) | 1 | |
| P20M2-H15 | SWITCH,LOW PRESSURE | 1 | |
| P29TF65 | VISUAL ACCEPTABILITY LIMITS FOR FAN BOOSTER AND COMPRESSOR B | 1 | |
| P3 | Maxi-Lube® High Pressure Air Operated Grease Pump (Capacity: 35 lb Pail) (Add to cart: Add To Cart) | 3 | |
| P3961B785001 | DIGITAL PRESSURE GAUGE | 1 | |
| P5514-70M | HYDRAULIC PRESSURE COMPARATOR W/VITON SEALS, | 2 | |
| P5514-70M-EP | P5514-70M-EP HYDRAULIC PRESSURE COMPARATOR WITH ETHYLENE PROPYLENE SEALS, 70MPA | 3 | |
| P5515-140M | HYD.PRESSURE C.W.V.SEALS-FLUK | 2 | |
| P562713 | PRESSURE GAUGE | 1 | |
| P6 | Maxi-Lube® High Pressure Air Operated Grease Pump (Capacity: 35 lb Pail) (Add to cart: Add To Cart) (Capacity: 120 lb (54.4 kg) Drum) (Add to cart: Add To Cart) | 1 | |
| P60-M1-4A | WATTS P60 SERIES MINIATURE PLASTIC WATER PRESSURE REGULATOR - 4 WAY - 1/4" FNPT 0-25 PSI | 1 | |
| P60373 | COVER, SHIPPING (OIL TANK PRESSURE TUBE) | 1 | |
| P60382 | COVER-SHIPPING (OIL TANK PRESSURE TUBE) | 1 | |
| P75701−3 | Adapter − Third Pitot−Static Pressure Test | 10 | |
| P90-5 | PRESSURE SENSOR THALES E36111BA | 1 | |
| P900-1 | DRILL PRESS-LOTUS LTD P900-1 1/2HP 20MM | 1 | |
| P913-0004 | PRESSURE TRANSDUCER | 1 | |
| P96842-02 | COVER ASSEMBLY, PITOT PRESSURE PUMP, | 1 | |
| P99380FF3 | PRESSURE TEST ADAPTER | 1 | |
| PA31-012 | CANOPY COVER (pressurized models) | 1 | |
| PA31-016 | CANOPY/NOSE COVER (pressurized models) | 1 | |
| PA31-019 | EXTENDED CANOPY/NOSE COVER (Pressurized models) | 1 | |
| PA31-106 | ENGINE INLET PLUGS (PRESSURIZED MODELS) (set of 4) | 1 | |
| PA31-310 | HORIZONTAL STABILIZER COVERS (pressurized models), WINTER USE (set of 2) | 1 | |
| PA31-315 | HORIZONTAL STABILIZER COVERS (pressurized models), ALL YEAR USE (set of 2) | 1 | |
| PA31-820 | TRAVEL COVER, Light Weight Canopy Cover (pressurized models) | 1 | |
| PA31-830 | TRAVEL COVER, Light Weight Travel Canopy/Nose Cover (pressurized models) | 1 | |
| PA31-915 | COCKPIT HEATSHIELDS (PRESSURIZED MODELS) (set of 4) | 1 | |
| PA31-917 | COCKPIT HEATSHIELDS (pressurized models, includes eyebrow windows) (set of 6) | 1 | |
| PA31-918 | CABIN HEATSHIELDS (pressurized models) (set of 4) | 1 | |
| PA473K300 | AIR PRESSURE REGULATOR | 1 | |
| PACE5000 | Single Pressure Controller Chassis | 1 | |
| PAEC1001 | PRESSURE INDICATOR | 1 | |
| PAS-TW60-WAND | PowerAll Systems PAS-TW60-WAND Pratt & Whitney PT-6 Compressor Wash Ring | 2 | |
| PBC42A | HI PRESSURE PARTS WASHER 220V | 1 | |
| PBC42B | HI PRESSURE | 1 | |
| PBC58 | HG-PRESS HEAVY DUTY AUTO WASHER | 1 | |
| PBC807 | PRESSURE GAUGE | 1 | |
| PBCH42B-EUR | HI PRESSURE PARTS WASHER 220V | 1 | |
| PBPHOSE | PARKING BRAKE PRESSURE HOSE | 1 | |
| PBRHOSE | PNEUMATICBRAKE PRESSURE HOSE | 1 | |
| PBS-110 | PRESS BRAKE MACHINE | 1 | |
| PC-10-11 | HIGH PRESSURE N ADAP | 7 | |
| PC-1004 | REGULATOR, LOW PRESSURE | 1 | |
| PC-1006 | ADAPTER, PRESSURE OXYGEN | 19 | |
| PC-1007 | CONNECTOR, HIGH PRESSURE | 6 | |
| PC-1011 | ADAPTOR, HIGH PRESSURE N | 7 | |
| PC-1033 | Gauge, Pressure | 2 | |
| PC-1033-1 | GAUGE, PRESSURE | 2 | |
| PC-1037-01 | REGULATOR, HI PRESSURE | 2 | |
| PC-1067 | COUPLING, HIGH PRESS HOSE | 9 | |
| PC-1073 | VALVE: STRUT,HIGH PRESSURE, | 2 | |
| PC-1089-01 | REGULATOR, LOW PRESSURE | 2 | |
| PC-1095 | REGULATOR, HIGH PRESSURE | 1 | |
| PC-1106 | PRESSURE GAUGE (0-4000 PSI) | 1 | |
| PC-1191-01 | REGULATOR, HIGH PRESSURE | 1 | |
| PC-1192-01 | REGULATOR, LOW PRESSURE | 1 | |
| PC1006N | HIGH PRESSURE NITROGEN ADAPTOR | 1 | |
| PC1007 | CONNECTOR, HIGH PRESSURE | 6 | |
| PC1011 | HIGH PRESSURE N ADAP | 7 | |
| PC1033 | GAUGE: PRESSURE, | 2 | |
| PC1033-1 | GAUGE: PRESSURE, | 2 | |
| PC1037-01 | REGULATOR: PRESSURE,OXYGEN, HP | 2 | |
| PC1062-02 | REGULATOR: PRESSURE,OXYGEN, CLEAN OXYGEN | 4 | |
| PC1064 | REGULATOR: HIGH PRESSURE, | 1 | |
| PC1067 | COUPLING, HIGH PRESSURE HOSE | 9 | |
| PC1089-01 | REGULATOR: PRESSURE,OXYGEN, LOW PRESSURE | 2 | |
| PC1095 | REGULATOR: HIGH PRESSURE,ST, | 1 | |
| PC1133 | VALVE, HIGH PRESSURE RELIEF, | 2 | |
| PC1142 | GAUGE: REGULATOR,PRESSURE,LOW, | 1 | |
| PCS400 | PRESSURE CONTROLLER | 1 | |
| PC−2409−9738 | VACUUM PUMPEQUIVALENT (CAPABLE OF PROVIDING A MINIMUM FLOW OF 0.93 CFM AT A DIFFERENTIAL PRESSURE OF 3 PSI). | 4 | |
| PD-100 | "PROTECTIVE CAPS PRESSURE SWITCH BOSS | 2 | |
| PD372 | TRAILER COMPRESSED GAS | 1 | |
| PDCR330-1028MO | TRANSDUCER OIL PRESSURE | 1 | |
| PEM212LF | Gauge, Pressure Gauge Type, 0 to 30 psi Range | 1 | |
| PERMASWAGE | PRESSURE GAUGE TOOL | 1 | |
| PF-50296 | WATER PRESSURE PLUG | 1 | |
| PF53361-2PWS | COMPRESSION RIVETER | 12 | |
| PF53481-3P | COMPRESSION RIVETER | 2 | |
| PF55451-7WS | COMPRESSION RIVETER | 3 | |
| PF56106 | Kit − Pressure Gauge (0−200 PSIG) | 1 | |
| PF9-207-05/-07 (-51, -54, -62, -81) | Pressure Inlet and Outlet Fittings | 1 | |
| PF9-217-02/-05 (-48) | Pressure Inlet and Outlet Fittings | 1 | |
| PFB1X0.75X1.74 | PRESS FIT BUSHING 1 OD X 3/4 ID X 1.74 LG EN 4140HT | 1 | |
| PFB1X3/4X3/4 | PRESS FIT BUSHING 1 | 2 | |
| PFB1X34X34 | PRESS FIT BUSHING 1 OD X 34 ID X 34 L | 2 | |
| PFB20X14X38 | PRESS FIT BUSHING 20ODX14IDX38L | 1 | |
| PFB30X20X38 | PRESS FIT BUSHING 30 OD X 20 ID X 38 LG | 1 | |
| PFB35X24X20 | PRESS FIT BUSHING 35ODX24IDX20L | 1 | |
| PFB35X24X23 | PRESS FIT METRIC 35OD X 24 ID X 23LG | 1 | |
| PFB42X30X23 | PRESS FIT BUSHING 42 OD X 30 ID X 23 LG | 1 | |
| PFB55X42X23 | PRESS FIT BUSHING 55 OD X 42 ID X 23 LG | 1 | |
| PFE3935R1 | PRESSURE GAUGE (0-250 PSIG) | 1 | |
| PG 0-150 PSI | Pressure Gauge | 1 | |
| PG-3000 SERIES | DIGITAL PRESSURE GAG | 1 | |
| PG-3600 | TIRE PRESS. 300 PSI | 1 | |
| PG01 | Ionic Systems Pressure Gauge 0-16 Bar | 2 | |
| PG100SQA/005 | TIRE PRESSURE GAUGE | 1 | |
| PG160-NG | PRESSURE GAUGE_(0 ~ 160) PSI (5) ±1 DIV_[PG160-NG] | 1 | |
| PG2000-WK | PRESSURE GAUGE_0 ~ 2000 PSI(50)_[PG2000-WK] | 1 | |
| PGL 150 | PRESSURE | 1 | |
| PGL-A-63-N-B-3000-S | PRESSURE GAUGE | 1 | |
| PGP120 | TYRE PRESSURE GAUGE (PENCIL TYPE) | 1 | |
| PGPL150 | TYRE PRESSURE GAUGE | 1 | |
| PGRAT1 | PRESSURE TESTING MACHINE | 3 | |
| PGUF-20L-100PSI/7BAR-CAL3 | AIR PRESSURE GAUGE | 1 | |
| PH02 | HI-PRESS MUFFLER | 2 | |
| PHA | PRESSRUE HOSE | 1 | |
| PHX6009B | PB1 PRESS BLEED APAPTOR | 1 | |
| PIN7000 | PRESSURE INTENSIFIER | 1 | |
| PIN8000BA | PRESSURE INTENSIFIER | 1 | |
| PK 75250 | COMPRESSOR PUMA | 1 | |
| PK30-120 | COMPRESSOR | 1 | |
| PLF1026 | TOOL, DRILL PRESS SWAGER | 1 | |
| PLOC 64444 | ENGINE COMPRESSOR WASH EQUIPMENT | 1 | |
| PM-12-6.35-8.5 | PRESSS FIT BUSHING 12 O.D X 6.35 LG. X 8.5 I.D. | 1 | |
| PM-15-12-10.00 | PRESS FIT METRIC BUSHING ID10XOD15X12LG. | 1 | |
| PM-18-12-12.00 | PRESS FIT METRIC 18OD X 12ID X 12LG | 1 | |
| PM-20-28-12 | PRESS FIT BUSING 20mm od x 28mm lg x 12mm id | 1 | |
| PM-22-28-12.5 | PRESS FIT BUSHING | 1 | |
| PMP 3134-08L-4974M0 | AMPLIFIED AEROSPACE PRESSURE TRANSDUCER - /-50PSID | 1 | |
| PN2311F | PRESSURE TESTER | 1 | |
| PNPGT43 | MANOMETER ( BELONGS TO COMPRESSOR) | 1 | |
| PNPGT79 | COMPRESSOR | 2 | |
| PNPGT85 | MANOMETER ( BELONGS TO COMPRESSOR) | 1 | |
| PNS-1 | HOOVER PRESS-N-SNAP TOOL | 1 | |
| PNS-PTD | HOOVER PRESS-N-SNAP TOOL | 1 | |
| PO-54665-SL | HOSE PRESSURE KIT | 1 | |
| POCPRES-REG-01 | PORTACOOL PRESSURE REGULATOR | 1 | |
| POMTAVA -3301104 | COMPRESS SLEEVE FOR PRESS SENSOR | 1 | |
| POWX1721 | PORTABLE AIR COMPRESSOR, 6 LITER | 1 | |
| PPG-ASSEMBLY-59024 | IPT CUSTOM MANIFOLD WITH 9/16” MEDIUM-PRESSURE FEMALE C&T | 1 | |
| PPG-ASSEMBLY-59041 | IPT CUSTOM MANIFOLD WITH 9/16” HIGH-PRESSURE FEMALE C&T, NACE COMPLIANT | 1 | |
| PPK3706 | HIGH PRESSURE CONNECTOR AIRCRAFT GOOSE NECK STRUT SERVICE ADAPTER | 1 | |
| PPR2-FNPT6-KN-32W-316L | REGULATOR, PRESSURE (0 - 150 PSIG) | 1 | |
| PR 135 | BEARING ASSEMBLING PRESS-IN FIXTURE | 1 | |
| PR135 | BEARING ASSEMBLING PRESS-IN FIXTURE | 1 | |
| PR9111 | DIGITAL PRESSURE GAUGE | 1 | |
| PRECISION PRESSURE GAUGES FOR | PRECISION PRESSURE GAUGES FOR AIRCRAFT 0 - 18 BAR | 1 | |
| PRESSER | PRESSER | 1 | |
| PRESSURE GAUGE | PRESSURE GAUGE TO TOOL 2C6395G05 | 2 | |
| PRESSURE GAUGE (0-2000PSI) | PRESSURE GAUGE (0-2000PSI) | 1 | |
| PRESSURE GAUGE 0 TO 160 PSI | PRESSURE GAUGE 0 TO 160 PSI | 1 | |
| PRESSURE GAUGE 0-140PSI | PRESSURE GAUGE 0-140 PSI 0-1000 KPA BRAND: RASAKTI | 1 | |
| PRESSURE GUAGE | Pressure Guage 0-3000 | 1 | |
| PRESSURE-TEST-SET | PRESSURE TEST FLAP SYSTEM | 1 | |
| PRESSUREBLANK KIT | PRESSUREBLANK KIT | 1 | |
| PRESSUREGAUGE | DIGITAL TIRE PRESSURE GAUGE, WITH UPDATE CALIBRATION CHECK, < 250 PSI | 2 | |
| PRO-301L-402P-01 | ANALOG PRESSURE GAUGE - 0 - 3000 PSI | 1 | |
| PROTECTIVE CAP PRESSURE SWITCH | PROTECTIVE CAP PRESSURE SWITCH | 1 | |
| PROTECTIVE CAP PRESSURE SWITCH BOSS | PROTECTIVE CAP PRESSURE SWITCH BOSS | 1 | |
| PROTECTIVE CAP PRESSURE SWITCH FITTING | PROTECTIVE CAP PRESSURE SWITCH FITING | 1 | |
| PRS-01 | PRESSURE SPRAYER | 1 | |
| PRT078418-1 | BEARING PRESSING TOOL | 1 | |
| PRT078829 | BEARING PRESS TOOL | 1 | |
| PRT079829 | BEARING PRESS TOOL | 1 | |
| PRT080170-1 | BEARING PRESSING TOOL | 1 | |
| PRTEMP100D | DIFFERENTIAL PRESSURE | 1 | |
| PRV | Ionic Systems Caleffi 1/2 in BSP Female Pressure Relief Valve 5 Bar | 2 | |
| PS10352 | BEARING PRESS FIXTURE | 1 | |
| PS10352-5 | BEARING PRESS DRIVER | 1 | |
| PS10518 | BEARING PRESS FIXTURE | 1 | |
| PSC 8 | STATIC PRESSURE PROBE | 1 | |
| PSC1800 | AIR START, TURBINE COMPRESSOR - CART | 1 | |
| PSC3000 | AIR START, TURBINE COMPRESSOR - CART | 1 | |
| PSDF4600-33 | COMPRESSION SPRING | 1 | |
| PSS73260-3-4-4 | Pitot Test Adaptor - Global Express, Global 500, 6000, 6500, Challengher 300, 350, BD100 | 2 | |
| PT-033C | DIFFERNTL PRESS SENSOR/TRANDUCER | 1 | |
| PT10128 | PRESS-TEST ADAPTOR | 1 | |
| PT338-88 | COMPRESSION SPRING | 1 | |
| PTT12392 | 3IN PRESSURE SQUEEZER | 1 | |
| PTX50A2-TA-A1-CA-HO-PF | PRESSURE TRANSDUCER | 1 | |
| PTX50A2-TB-A1-CA-H1-PE | PRESSURE SENSOR | 1 | |
| PTX50A2-TB-A3-CA-HO-PH | PRESSURE TRANSMITTER:PTX50A2-TB-A3-CA-HO-PH- 250 PSI. MAKE : GE DRUCK | 1 | |
| PV 103 | PRESSURE/VACUUM SUPPLY UNIT | 1 | |
| PV100 | SUPPLY PRESS VACUM | 1 | |
| PV1001 | PRESSURE GAUGE | 1 | |
| PV103 | Pressure/Vacuum Supply Unit (for flightline use) | 1 | |
| PV103R | Pressure/Vacuum Supply Unit | 3 | |
| PW127M | COMPRESSOR WASH CART FOR AIRCRAFT ENGINE | 1 | |
| PWA 102828 | MECHANICAL COMPRESSOR (FAN BLADE LOCK) | 5 | |
| PWA 112010 | GAGE, HYDRAULIC PRESSURE − HYDRAULIC PUMP REPLACES 75048 | 1 | |
| PWA 12402 | COMPRESSOR ROTOR WRENCH | 6 | |
| PWA 12812 | Fixture Compr.rear bearing seal air pressure tube | 1 | |
| PWA 16053 | PULLER REAR COMPRESSOR DRIVE TURBINE SPACER | 1 | |
| PWA 16073 | PULLER REAR COMPRESSOR DRIVE TURBINE ROTOR | 1 | |
| PWA 16156 | EYE REAR COMPRESSOR DRIVE TURBINE ROTOR | 1 | |
| PWA 16178 | EYE COMPRESSOR DISK AND BLADE ASSEMBLY | 2 | |
| PWA 16249 | HOLDER FRONT COMPRESS0R ROTOR BEARING 1 | 1 | |
| PWA 16353 | EYE FRONT COMPRESS0R DRIVE TURBINE ROTOR | 1 | |
| PWA 16360 | STAND FRONT COMPRESSOR VERTICAL ASSEMBLY | 1 | |
| PWA 16371 | ADAPTER FRONT COMPRESSOR ROTOR STAND | 1 | |
| PWA 16372 | GAGE FRONT COMPRESSOR REAR TIEROD | 2 | |
| PWA 16525 | FITTING FRONT COMPRESSOR AIR TEST | 1 | |
| PWA 16606 | MOMENT WEIGHT SCALE COMPRESSOR FAN BLADE | 1 | |
| PWA 16636 | EYE REAR COMPRESSOR ROTOR | 1 | |
| PWA 16740 | GAGE FRONT COMPRESSOR ROTOR TIEROD | 2 | |
| PWA 17213 | RING COMPRESSOR INLET | 1 | |
| PWA 17311 | YOKE REAR COMPRESSOR DRIVE TURBINE | 1 | |
| PWA 17337 | PULLER REAR COMPRESSOR ROTOR FRONT HUB | 1 | |
| PWA 25104 | HYD. PRESS FIXTURE | 2 | |
| PWA 25967 | PRESSURE ADAPTER | 2 | |
| PWA 26609 | PRESSURE ADAPTER | 1 | |
| PWA 26937 | COVER, PRESSURE TEST - IMC #1,2 SUMP | 2 | |
| PWA 27886 | PRESSURE ADAPTER | 1 | |
| PWA 29181 | LPT PRESSURE ADAPTER | 1 | |
| PWA 30051 | WRENCH FRONT COMPRESS0R DRIVE TURBINE TIE ROD | 1 | |
| PWA 30073 | WRENCH REAR COMPRESS0R SEALING TUBE NUT | 1 | |
| PWA 30074 | HOLDER REAR COMPRESS0R SEALING TUBE NUT | 1 | |
| PWA 30075 | PUSHER REAR COMPRESS0R SEALING | 1 | |
| PWA 30188 | GAGE FRONT COMPRESSOR DRIVE | 2 | |
| PWA 31713 | GAGE FRONT COMPRESSOR ROTOR TIEROD | 1 | |
| PWA 35929 | 9D FUEL HEATER PRESS | 1 | |
| PWA 45234 | COMPRESSOR | 3 | |
| PWA 45236 | INLET PRESS PROBE | 1 | |
| PWA 45248 | COMPRESSOR BLADE KNOCKER PULLER | 5 | |
| PWA 45256 | INLET PRESSURE PROBES WITH TUBES | 1 | |
| PWA 45402 | TURBINE PRESSURE PROBES | 1 | |
| PWA 45403 | DIFF PRESS & TEMP PROBE | 1 | |
| PWA 45446 | INTERMEDIATE PRESS & TEMP PROBE | 1 | |
| PWA 45574 | ORIFICE FOR BURNER PRESS | 1 | |
| PWA 46017 | TURBINE PRESSURE PROBES | 1 | |
| PWA 6968 | PULLER REAR COMPRESSOR 10 TH | 1 | |
| PWA 7303 | NUT FRONT COMPRESSOR DRIVE TURBIN | 1 | |
| PWA 8133 | GAGE REAR COMPRESSOR ROTOR TIEROD | 1 | |
| PWA 8167 | EYE REAR COMPRESSOR | 1 | |
| PWA 88617 | COMPRESSOR-FAN BLADE LOCK | 5 | |
| PWA10015 | OIL PRESSURE RELIEF WRENCH | 1 | |
| PWA100180 | PRESSURE RIGGING KIT_457 X 356 X 178 MM / 8 KG_[PWA100180] | 1 | |
| PWA101170 | PRESSURE KIT TEST TO | 1 | |
| PWA102120 | INTERMEDIATE PRESSURE TUBE REMOVAL FIXTURE | 1 | |
| PWA102828 | COMPRESSOR-LPC FAN BLADE | 5 | |
| PWA103684 | TURBINE EXHAUST CASE, NO.5 BEARING PRESSURE TUBE | 1 | |
| PWA106201 | COMPRESSOR-FAN BLADE LOCK | 1 | |
| PWA107766 | TEST BOX - IDG/AOC OVERRIDE PRESSURE SWITCH | 1 | |
| PWA107778 | ELECTRICAL CABLE - IDG/AOC OVERRIDE PRESSURE SWITCH TEST BOX TO ENGINE | 1 | |
| PWA107812 | TEST HOSE - PNEUMATIC, IDG/AOC OVERRIDE PRESSURE SWITCH | 1 | |
| PWA107873 | COMPRESSOR, DEFORM | 1 | |
| PWA107918 | COMPRESSOR MECHANICAL - ENGINE ASSEMBLY, LPC FAN BLAD | 1 | |
| PWA109760 | Pressure Tool | 1 | |
| PWA12402 | WRENCH FRONT COMPRESSOR ROTOR PLUG | 6 | |
| PWA12637 | HPC -COMPRESS ROD -PLATE | 1 | |
| PWA16044 | COMPRESS | 1 | |
| PWA211754 | AIR PRESSURE ADAPTOR | 1 | |
| PWA21875 | REGULATOR, PRESSUE | 2 | |
| PWA25029 | GUIDE-COMPRESSOR ROTOR 1ST | 1 | |
| PWA25034 | PULLER - OIL PRESSURE REGULATOR VALVE_[PWA25034] | 2 | |
| PWA25319 | BASE BREATHER PRESSURE VALVE SEAL RETAINER | 2 | |
| PWA25378 | WRENCH INSTRUMENTATION PLUG 2-3 COMPRESSOR INNER | 1 | |
| PWA25619 | EYE LIFT-COMPRESSOR ROTOR 1ST | 2 | |
| PWA25621 | WRENCH-COMPRESSOR ROTOR 1ST | 1 | |
| PWA25637 | PINS RIGGING - REAR COMPRESSOR VARIABLE STATORS | 5 | |
| PWA26078 | WRENCH - MAIN OIL PRESSURE RELIEF VALVE ADJUSTING | 3 | |
| PWA26113 | FIXTURE - #1 SEAL SUPPORT PRESSURE TEST_[PWA26113] | 1 | |
| PWA26176 | PINS CHECKING REAR COMPRESSOR VARIABLE STATORS | 1 | |
| PWA26934 | PLATE - PRESS TEST IMC,FRONT_[PWA26934] | 2 | |
| PWA26937 | COVER, PRESSURE TEST - IMC #1,2 SUMP_[PWA26937] | 2 | |
| PWA26938 | PLUG - PRESS TEST IMC_[PWA26938] | 2 | |
| PWA26939 | CAP - PRESSURE TEST, IMC #1/2 SUMP_[PWA26939] | 2 | |
| PWA26999 | ADAPTER - DISK PRESS_[PWA26999] | 1 | |
| PWA27000 | PRESS - HPC DISK_[PWA27000] | 1 | |
| PWA27275 | CAP, PRESS TEST - LPT SHAFT AIR INJECT_[PWA27275] | 2 | |
| PWA28143 | PULLER KNOCKER - OIL PRESSURE RELIEF VALVE | 3 | |
| PWA28181C | PLATE - PRESSURE TEST IMC REAR_[PWA28181C] | 1 | |
| PWA28379 | WRENCH - COMPRESSOR INLET CONE_[PWA28379] | 2 | |
| PWA28963 | PRESS_[PWA28963] | 2 | |
| PWA29167 | STAND-COMPRESSOR ROTOR 1ST STAGE | 2 | |
| PWA29237 | ADAPTER-R I COMPRESSOR ROTOR 1ST STAGE | 2 | |
| PWA29330 | ADAPTER-R I COMPRESSOR ROTOR 1ST STAGE | 1 | |
| PWA29331 | PRESS,HYD - NO.2 BRG SPACERS & SEALS_[PWA29331] | 1 | |
| PWA29351 | TOOL WRENCH,HAND-HIGH PRESSURE COMPR | 3 | |
| PWA29446 | PULLER-PUSHER HYD COMPRESSOR ROTOR 1ST | 1 | |
| PWA29663 | COMPRESSOR SET_[PWA29663] | 2 | |
| PWA32163 | ROD FRT CCOMPRESSOR | 1 | |
| PWA32165 | WRENCH FRT. COMPRESSOR | 4 | |
| PWA32363 | DIAPHRAM COMPRESSOR | 1 | |
| PWA32429 | DIAPHRAM COMPRESSOR | 1 | |
| PWA33201 | PRESS FILTER BYPASS V/V BASE | 8 | |
| PWA33304 | EYE- REAR COMPRESSOR | 1 | |
| PWA33304 REV NC | EYE- REAR COMPRESSOR | 1 | |
| PWA33682 | FUEL FILTER DIFFERENTIAL PRESS | 3 | |
| PWA33926 | STAND, VERTICAL BUILD - REAR COMPRESSOR | 2 | |
| PWA33926 REV NC | STAND, VERTICAL BUILD - REAR COMPRESSOR | 1 | |
| PWA45007 | PULLER, KNOCKER - 1ST STAGE COMPRESSOR AIR SEAL | 3 | |
| PWA45007 REV D | PULLER, KNOCKER - 1ST STAGE COMPRESSOR AIR SEAL | 1 | |
| PWA45014 | FRONT COMPRESSOR COUPLING WRENCH | 1 | |
| PWA45050 | EYE, LIFTING - COMPRESSOR INLET GROUP | 1 | |
| PWA45050 REV NC | EYE, LIFTING - COMPRESSOR INLET GROUP | 1 | |
| PWA45234 | COMPRESSOR | 3 | |
| PWA45234 REV A | COMPRESSOR- NO. 1 BRG. FACE SEAL ASSY | 1 | |
| PWA45248 | COMPRESSOR BLADE KNOCKER PULLER | 5 | |
| PWA45256 | INLET PRESSURE PROBES WITH TUBES | 1 | |
| PWA45269 | Plug, Vacuum (Tester, Pressure) | 1 | |
| PWA45363 | REGULATOR ASSEMBLY, AIR PRESSURE | 1 | |
| PWA45402 | TURBINE PRESSURE PROBES | 1 | |
| PWA45403 | DIFF PRESS & TEMP PROBE | 1 | |
| PWA45411 | GAUGE DIFF PRESSURE | 1 | |
| PWA45446 | INTERMEDIATE PRESS & TEMP PROBE | 1 | |
| PWA45574 | ORIFICE FOR BURNER PRESS | 1 | |
| PWA45613 | PRESSURE GAUGE_(0 ~ 300) PSI_[PWA45613] | 1 | |
| PWA46017 | TURBINE PRESSURE PROBES | 1 | |
| PWA47039 | YOKE - REAR COMPRESSOR DRIVE TURBINE ROTOR | 1 | |
| PWA47039 REV NC | YOKE - REAR COMPRESSOR DRIVE TURBINE ROTOR | 1 | |
| PWA500083 | PRESSURE CLEANER | 1 | |
| PWA500269 | RETAINER-LOW PRESSURE TURBINE REAR | 1 | |
| PWA51103 | ADAPTER, PRESSURE TE | 1 | |
| PWA51408 | COMPRESSOR,BUMPER ASSEMBLY | 1 | |
| PWA51408D | COMPRESSOR, BUMPER A | 1 | |
| PWA52706 | PROTECTOR, COMPRESS | 1 | |
| PWA57018 | TOOL COMPRESSION | 1 | |
| PWA57433 | PISTON COMPRESSOR | 1 | |
| PWA5841 | DEPRESSOR | 1 | |
| PWA71108 | PRESSURE CHECK SET | 1 | |
| PWA75028 | HYDRAULIC PRESS GAGE - HPC FRONT HUB_TO MEASURE PRESS_254 X 254 X 76 MM / 0.5 KG_[PWA75028] | 6 | |
| PWA75284 | PULLER-LOW PRESSURE PLATE FORM SHAFT, REAR | 2 | |
| PWA76190 | SLING-COMPRESSOR ROTOR 1ST STAGE | 1 | |
| PWA76271 | KIT - HIGH SPEED TURBINE AND COMPRESSOR ROTATING | 1 | |
| PWA77524 | HP COMPRESSOR TURNING TOOL | 1 | |
| PWA78013 | PULLER KNOCKER DIFFUSER CASE COMPRESSOR STATOR EXIT | 1 | |
| PWA80870 | ADAPTER PRESSURE TEST | 1 | |
| PWA80871 | ADAPTER PRESSURE TEST | 1 | |
| PWA83119 | ADAPTER PRESSURIZATION | 1 | |
| PWA84866 | Expander Tube - Compressor Rotor Assy | 1 | |
| PWA85433 | ADAPTER FUEL PUMP ASSY INLET PRESSURE | 7 | |
| PWA85451 | ADAPTOR FULE PRESSURE TOOL | 4 | |
| PWA85566 | RESTRAINING LOW PRESSURE | 1 | |
| PWA85599 | PLUG PRESS TEST | 1 | |
| PWA85678 | COVER PRESSURE TEST | 1 | |
| PWA85688 | Puller, Jackscrew - Engine Assy, Compressor Stator Bearing Pin | 9 | |
| PWA85768 | COMPRESSOR BLADE LENGTH | 7 | |
| PWA86603 | ASSY COMPRESSOR STATOR SET 13 & 14 STAGE | 2 | |
| PWA86684 | ULTRASONIC INSPECTION KIT PW-4000 10TH STAGE COMPRESSOR DISK | 1 | |
| PWA86686 | EDDY CURRENT INSPECTION KIT PW-4000 10TH STAGE COMPRESSOR DISK | 1 | |
| PWA88126 | CAP,VACUUM CHECK-N4 BEARING COMPARTMENT PRESSURE | 1 | |
| PWA88263 | SIMULATOR-OIL PRESSURE TRANSMITTER | 1 | |
| PWA88617 | COMPRESSOR-FAN BLADE LOCK | 5 | |
| PWC 32677-100 | COMPRESSOR,WASHCART | 2 | |
| PWC 32677-300 | COMPRESSOR,WASHCART | 13 | |
| PWC 34910-804 | COMPRESSOR WASH NOZZLEHP DISC | 17 | |
| PWC 70376 | PRESSURE TEST FIXTURE | 4 | |
| PWC05-070 | TAPE, PRESSURE SENSITIVE ADHESIVE FLAME | 1 | |
| PWC30059 | FIXTURE, COMPRESSOR STUBSHAFT | 4 | |
| PWC30114-02 | STAND, COMPRESSOR | 1 | |
| PWC30114-4 | WRENCH COMPRESSOR | 1 | |
| PWC30128-03 | PULLER LP (COMPRESSOR TIE ROD) | 2 | |
| PWC30128-06 | PULLER, NO.4 BEARING PRESSURE/SCAVENGE OIL TUBES | 7 | |
| PWC30128-15 | PULLER, COMPRESSOR WASH NOZZLE | 9 | |
| PWC30128-15S | PULLER, COMPRESSOR WASH NOZZLE | 2 | |
| PWC30128-8 | FIXTURE, COMPRESSOR ROTOR BLADELENGTH GAGE | 2 | |
| PWC30219 | COMPRESSOR RING | 2 | |
| PWC30220 | COMPRESSOR | 1 | |
| PWC30256 | FITTING, PRESSURE CHECK | 3 | |
| PWC30257 | PLUG, PRESSURE CHECK | 3 | |
| PWC30271-100 | GUARD, COMPRESSOR | 5 | |
| PWC30304-11 | SET, LP COMPRESSOR DISK BALANCING RIVETS | 2 | |
| PWC30304-12 | SET, LP COMPRESSOR DISK BALANCING RIVETS | 2 | |
| PWC30314 | RGB Oil Press Fitting | 1 | |
| PWC30331 | P&W COMPRESSOR TURBINE DISC WRENCH | 9 | |
| PWC30403 | COMPRESSOR TURBINE DISK PULLER | 13 | |
| PWC30405 | Fixture Press (HSI) | 8 | |
| PWC30415 | COMPRESSOR | 8 | |
| PWC30415-1 | COMPRESSOR | 1 | |
| PWC30416 | Puller Compressor Valve | 9 | |
| PWC30420 | HOLDING FIXTURE, COMPRESSOR ROTOR ASSEMBLY | 1 | |
| PWC30433 | RIVETER, COMPRESSOR | 5 | |
| PWC30458 | COMPRESSOR TURBINE DISK SQUEEZER | 10 | |
| PWC30497 | PLUG, OIL PRESSURE | 2 | |
| PWC30556 | COMPRESSOR | 9 | |
| PWC30855 | COMPRESSOR | 2 | |
| PWC30859 | press. test fixture plate | 4 | |
| PWC30872 | FIXTURE, OIL PRESSURE RELIEF VALVE | 1 | |
| PWC30892 | pressure test kit | 1 | |
| PWC31032 | PULLER, LP COMPRESSOR | 1 | |
| PWC31047 | ENGINE COMPRESSOR WASHER | 3 | |
| PWC31066 | PULLER, LP COMPRESSOR CASE (JT15D-1 SERIES) | 1 | |
| PWC31198 | COMPRESSOR WASH TOOL | 4 | |
| PWC31263 | CAP, FUEL NOZZLE ADAPTER PRESSURE CHECK (12 REQUIRED) | 1 | |
| PWC31404 | PULLER, FRONT INNER STATOR, LP COMPRESSOR CASE | 1 | |
| PWC31534 | WRENCH, HP COMPRESSOR ROTATING | 1 | |
| PWC31540 | WRENCH, HP COMPRESSOR ROTATING | 2 | |
| PWC31571 | OIL PRESSURE RELIEF VALVE ADJUSTER | 4 | |
| PWC31614 | ENGINE COMPRESSOR WASHER | 1 | |
| PWC31632 | PULLER, LP COMPRESSOR REMOVAL/INSTALLATION | 1 | |
| PWC31771-100 | GUARD, COMPRESSOR | 8 | |
| PWC31839 | SOCKET, JT15D-1 SERIES LP COMPRESSOR SHAFT, PRE-SB7318 (REPLACES PWC31461) | 1 | |
| PWC31871 | ADJUSTING WRENCH, OIL PRESSURE RELIEF VALVE | 1 | |
| PWC31892 | RIVET PRESS | 2 | |
| PWC32054 | CLAMP, OIL PRESSURE CHECK | 1 | |
| PWC32113 | FITTING, OIL SCAVENGE PRESSURE | 1 | |
| PWC32133 | GAGE, INTERNAL PRESSURE | 1 | |
| PWC32151 | Compressor Valve | 1 | |
| PWC32251 | SUPPORT COMPRESSOR TURBINE. | 3 | |
| PWC32271 | COMPRESSOR WASH NOZZLE (SPRAY TUBE) | 12 | |
| PWC32396 | JACKSCREW (6 MAX.) SPRING COMPRESSION | 7 | |
| PWC32432 | PRESSURE TEST ADAPTER | 1 | |
| PWC32455 | Stand COMPRESSOR ASSY | 3 | |
| PWC32457 | FITTING PS1 TAPPING ( TEST CELL STATIC PRESSURE, PROPELLER | 4 | |
| PWC32469 | HOLDER, COMPRESSOR ROTOR | 2 | |
| PWC32677-100 | WASHCART COMPRESSOR | 2 | |
| PWC32677-100-300 | WASHCART, COMPRESSOR | 1 | |
| PWC32677-30 | COMPRESSOR WASHER | 1 | |
| PWC32677-300 | COMPRESSOR WASHER | 13 | |
| PWC32677-300 | CART COMPRESSOR/FUEL NOZZLE WASH | 13 | |
| PWC32807 | GAGE, COMPRESSOR | 2 | |
| PWC34039 | COMPRESSOR RING | 1 | |
| PWC34295 | TUBE, TRANSFER, PLENUM PRESSURE | 3 | |
| PWC34297 | TC static press Probe | 1 | |
| PWC34334 | FITTING, PRESSURE TEST | 1 | |
| PWC34405 | FIXTURE-PRESSURE | 8 | |
| PWC34432 | PROTECTOR, COMPRESSOR ROTOR | 1 | |
| PWC34460 | TRANSDUCER, OIL PRESSURE | 1 | |
| PWC34461 | Pressure, probe | 1 | |
| PWC34520 | PULLER,OIL PRESS IND | 4 | |
| PWC34910-109 | BORESCOPE INSPECTION OF THECOMPRESSOR TURBINE BLADES FOREVIDENCE OF BLADE SHIFTING | 9 | |
| PWC34939 | PUSHER-FOR LP COMPRESSOR/LP TURBINE | 17 | |
| PWC37110 | COMPRESSOR CASE AND PEDESTAL ADAPTER | 5 | |
| PWC372677-300 | COMPRESSOR WASHER CART | 1 | |
| PWC37351 | FIXTURE, ALIGNING HIGH PRESSURE DISK AND COVERS | 6 | |
| PWC37437 | Pressure test fixture | 1 | |
| PWC37445 | SUPPORT, LOW PRESSURE TURBINE DISK | 6 | |
| PWC37498-6 | PRESSURE SCREW | 1 | |
| PWC37586 | GRINDER, HIGH AND LOW PRESSURE SHROUD SEGMENTS | 2 | |
| PWC37651 | DULLER SLEEVE OIL PRESSURE CHECK VALVE | 14 | |
| PWC37839 | WHEEL, HIGH PRESSURE TURBINE VANES GRINDING | 3 | |
| PWC37852 | PULLER,OILE PRESSURE CHECK VALVE SLEEVE | 6 | |
| PWC37878 | Pressure test fixture | 1 | |
| PWC37879 | Pressure test fixture | 1 | |
| PWC37918 | GRINDER COMPRESSOR T | 8 | |
| PWC37924 | PRESSURE TEST FIXTURE. | 2 | |
| PWC37952 | Puller, Oil Pressure Reg Valve Sleeve | 8 | |
| PWC37952-4 | PULLER, OIL PRESS REGU | 1 | |
| PWC37953 | Puller, Oil Pressure Check Valve Sleeve | 9 | |
| PWC37980 | GAGE, LOW AND HIGH PRESSURE TURBINE SHROUD SEGMENT | 3 | |
| PWC38005 | TUBE LOW PRESS BLEND | 1 | |
| PWC38073 | SEAL DRIFT, PULLER, DRIFT, PRESS | 2 | |
| PWC38101 | FIXTURE, HOLDING, LOW PRESSURE VANE RING SEAL MACHINING | 2 | |
| PWC38106 | CYLINDER, LP COMPRESSOR REMOVAL | 1 | |
| PWC38171-1 | PRESSURE SCREW | 1 | |
| PWC38395 | ADAPTER, HIGH PRESSURE TURBINE STUB SHAFT, PULLING | 1 | |
| PWC38428 | FIXTURE, HIGH PRESSURE TURBINE BLADES GRINDING | 1 | |
| PWC40437 | PRESERVATION RIG, NON PRESSURIZED | 4 | |
| PWC40531 | STRETCHER-COMPRESSOR | 1 | |
| PWC40597 | LIFTER CASE HP COPRESSOR | 1 | |
| PWC40952 | LOCATOR-HP COMPRESSOR | 1 | |
| PWC40953 | LOCATOR HP COMPRESSOR (REPLACE PWC40863) | 1 | |
| PWC43260 | SOCKET (COMPRESSOR INLET CONE) | 5 | |
| PWC45808 | RING COMPRESSOR | 1 | |
| PWC46161 | BENCH HYDRAULIC PRESS SUR GHE46297 | 1 | |
| PWC46162 | HYDRAULIC-PRESS | 1 | |
| PWC47123 | FUEL MANIFOLD PRESSURE INDICATOR UNIT | 1 | |
| PWC47124 | FUEL MANIFOLD PRESS TEST INTERCONNECT CABLE | 1 | |
| PWC47205 | COVER, PRESSURE | 1 | |
| PWC47206 | COVER, PRESSURE | 1 | |
| PWC47207 | COVER, PRESSURE | 3 | |
| PWC48067 | COMPRESSOR WASH FIXTURE | 3 | |
| PWC48220 | Blanking Kit Compressor Wash | 3 | |
| PWC48222 | P15 PRESSURE RAKE | 1 | |
| PWC48224 | PRESSURE RAKE | 1 | |
| PWC48314 | CONE-COMPRESSOR INLET,SLAVE | 1 | |
| PWC50001 | PRESS TEST FIXTURE | 2 | |
| PWC50023 | pressure test kit | 1 | |
| PWC50113 | CONPRESSOR | 8 | |
| PWC50150 | BRACKET LIFTING COMPRESSOR | 2 | |
| PWC50159 | PULLER, GAS GENERATOR COMPRESSOR INLET CASE | 2 | |
| PWC50209 | PRESSURE SCREW | 1 | |
| PWC50353 | Press/Torque Stand | 1 | |
| PWC50403 | BASE, COMPRESSOR | 1 | |
| PWC50430 | SUPPORT COMPRESSOR | 1 | |
| PWC50502 | Compressing Tool | 5 | |
| PWC50502-3 | COMPRESSOR- P&WC | 1 | |
| PWC50537 | PULLER- COMPRESSOR REAR BEARING | 3 | |
| PWC50557 | BASE COMPRESSOR TURBINE DISK | 1 | |
| PWC50618 | COMPRESSOR ROTOR HOLDER | 4 | |
| PWC50659 | COMPRESSOR | 1 | |
| PWC50762 | PULLER OIL PRESSURE INDICATOR RESTRICTOR | 1 | |
| PWC50781 | Puller, Oil Pressure Indicator Restrictor | 9 | |
| PWC50782 | Puller, Oil Pressure Indicator Restrictor | 9 | |
| PWC50782-3 | PULLER, OIL PRESS | 1 | |
| PWC50815 | Soket Wrench Rotor Compressor | 1 | |
| PWC51021 | COMPRESSOR ROTO BALANCING SHIM | 1 | |
| PWC51025 | SLEEVE, PROTECTOR COMPRESSOR | 3 | |
| PWC51038 | PULLER, COMPRESSOR | 1 | |
| PWC51039 | SLAVE, SEAL COMPRESSOR | 1 | |
| PWC51368 | COMPRESSOR | 5 | |
| PWC51382 | Puller Box Set(Oil press. Valve housing 26 pieces) | 1 | |
| PWC51382-100 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-110 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-150 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-160 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-200 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-210 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-250 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-260 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-300 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-310 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-350 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-360 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-400 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-410 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-450 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-460 | Puller (Oil press. Valve housing) | 5 | |
| PWC51382-500 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-510 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-550 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-560 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-600 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-610 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-650 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-660 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-670 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-680 | Puller (Oil press. Valve housing) | 1 | |
| PWC51625 | Piston Ring Compressor | 1 | |
| PWC51918 | Support Ring 3RD Stage Stator Compressor | 1 | |
| PWC51919 | RING 2ND STAGE STATOR COMPRESSOR | 1 | |
| PWC51920 | RING 1ST STAGE STATOR COMPRESSOR | 1 | |
| PWC51921 | Ring 3RD Stage Stator Compressor | 1 | |
| PWC52076 | SOCKET, LP COMPRESSOR REMOVAL/INSTALLATION | 1 | |
| PWC52077 | ADAPTER, LP COMPRESSOR REMOVAL/INSTALLATION | 1 | |
| PWC52080 | SUPPORT, LP COMPRESSOR REMOVAL/INSTALLATION | 1 | |
| PWC52094 | SOCKET, JT15D-4 SERIES LP COMPRESSOR SHAFT (PRE-SB7318; REPLACES PWC31461) | 1 | |
| PWC52116 | SOCKET, POST-SB7318 LP COMPRESSOR SHAFT FOR POST-SB7135 JT15D-4 AND ALL JT15-4, -4B ENGINES | 1 | |
| PWC52127 | SOCKET, POST-SB7318 LP COMPRESSOR SHAFT, JT15D-1 SERIES | 1 | |
| PWC52161 | GAGE, FUEL PRESSURE MANIFOLD PRESSURE CHECK | 1 | |
| PWC52360 | PULLER, LP COMPRESSOR REMOVAL | 1 | |
| PWC52366 | CRIMPER, LP COMPRESSOR CUP WASHER | 1 | |
| PWC52372 | SLEEVE, LP COMPRESSOR REMOVAL | 1 | |
| PWC52445 | WRENCH, SEATING, LP COMPRESSOR INLET CONE | 1 | |
| PWC52A | PRESSURE INDICATOR | 6 | |
| PWC54020 | GAGE, HIGH PRESSURE TURBINE BLADED DISK RADIUS | 4 | |
| PWC54081 | PUSHER, HIGH PRESSURE TURBINE STUB SHAFT, ASSEMBLY | 1 | |
| PWC54342-7 | PRESSURE SCREW | 1 | |
| PWC54609 | ADAPTER, HIGH PRESSURE TURBINE DISK BALANCING | 1 | |
| PWC54765 | RING COMPRESSOR | 1 | |
| PWC54912 | SOCKET, LOW PRESSURE TURBINE DISK RETAINING NUT (NON PROCURABLE) | 2 | |
| PWC55409 | Compressor ring | 1 | |
| PWC55442 | Compressor | 1 | |
| PWC55574 | PULLER-OIL PRESS REG VALVE (PRV) SLEEVE | 7 | |
| PWC55638 | Low Oil Pressure Switch | 1 | |
| PWC55648 | BRIDGE LP COMPRESSOR | 1 | |
| PWC56502 | COMPRESSOR WASH NOZZLEHP DISC | 4 | |
| PWC56574 | FIXTURE PRESS WASH | 1 | |
| PWC56827 | FIXTURE: TEST,PRESSURE,ST, | 2 | |
| PWC56827 | FIXTURE, PRESSURE TEST | 2 | |
| PWC56902 | PRESSURE BLOCK | 1 | |
| PWC57003 | RGB Pressure | 1 | |
| PWC57085 | RGB Static Pressure | 1 | |
| PWC57100 | PUMP HYDR. 2 SPEED (DIGITAL PRESS.GAGE) | 2 | |
| PWC57110 | P3 Pressure | 1 | |
| PWC57233 | PULLER, COMPRESSOR WASH AND BORO PLUG | 9 | |
| PWC57299-2 | PRESSURE SCREW | 1 | |
| PWC57299-8 | PRESSURE PAD | 1 | |
| PWC57455 | Pressure flush kit | 1 | |
| PWC57456 | Pressure Flush KIT | 1 | |
| PWC57508 | Pressure test fixture | 1 | |
| PWC57578-150 | Pressure kit | 1 | |
| PWC57694 | COMPRESSOR WASH NOZZLE(WAND) | 7 | |
| PWC57706 | Pressure test kit | 1 | |
| PWC57946 | PRESS TESTER | 2 | |
| PWC58132 | Compressor | 1 | |
| PWC58394 | TUBE-GUIDE, BORESCOPE, HIGH PRESSURE TURBINE | 1 | |
| PWC58437 | Pressure plug | 1 | |
| PWC58438 | Pressure plug | 1 | |
| PWC58439 | Pressure test kit | 1 | |
| PWC59053 | ADAPTOR TOOL ( COMPRESSOR WASH) | 8 | |
| PWC59365 | DUMMY SPACER, COMPRESSOR | 1 | |
| PWC59367 | DUMMY SPACER, COMPRESSOR | 1 | |
| PWC59578 | COMPRESSOR, LP COMP. MODULE | 1 | |
| PWC60176 | MAIN OIL PRESS. | 1 | |
| PWC60457 | PRESSURE ADJUSTMENT | 4 | |
| PWC60610 | KIT PRESSURE TEST 2 SET | 1 | |
| PWC60610-100 | KIT PRESSURE TEST | 1 | |
| PWC60610-200 | KIT PRESSURE TEST | 1 | |
| PWC60718 | LEAK CK KIT, PRESS TEST | 5 | |
| PWC60786 | PRESSURE TEST KIT | 3 | |
| PWC60831 | COMPRESSOR | 5 | |
| PWC60879 | PRESSURE TEST KIT | 1 | |
| PWC61152 | Nozzle, Compressor Wash | 5 | |
| PWC61152=37 | WASH RIG COMPRESSOR - PRATT & WHITNEY CANADA | 1 | |
| PWC61603 | RAKE TOT PRESS | 1 | |
| PWC61733 | AGB PRESS TUBE ASSY | 1 | |
| PWC61738 | Pressure tube | 1 | |
| PWC61996 | BLADE RETAINER (COMPRESSOR INLET CONE) | 3 | |
| PWC62073 | CRIMPER (COMPRESSOR INLET CONE) | 4 | |
| PWC62212 | Pressure wash rig | 2 | |
| PWC62282 | COMPRESSOR WASH FIXTURE | 3 | |
| PWC62322 | COVER AIR BLEED HIGH PRESSURE | 1 | |
| PWC62635 | BALANCING-COMPRESSOR | 1 | |
| PWC62670 | COVER AIR BLEED HIGH PRESSURE | 1 | |
| PWC62719 | LOCATOR COMPRESSURE | 1 | |
| PWC62943 | RIG: WASH,COMPRESSOR | 4 | |
| PWC63297 | ADAPTER-PRESS | 1 | |
| PWC63434 | Pressure flush kit | 1 | |
| PWC63472 | DRIFT HP COMPRESSOR | 1 | |
| PWC63473 | DRIFT HP COMPRESSOR | 1 | |
| PWC64005 | COMPRESSOR | 1 | |
| PWC64014 | Pressure Wash Adapter | 1 | |
| PWC64342 | COMPRESSOR | 1 | |
| PWC64444 | Compressor Wash Unit, Portable | 2 | |
| PWC64605 | MAIN OIL PRESSURE ADJUSTMENT FIXTURE | 3 | |
| PWC64658 | Locating Fixture Compressor Turbine Disc | 1 | |
| PWC64856 | TWEAKIGN PRESS | 1 | |
| PWC65453 | Pressure test kit | 1 | |
| PWC65624 | spring compressor | 1 | |
| PWC65658 | COMPRESSING PLIERS | 3 | |
| PWC66130 | Adapter Pressure Test Oil Tank | 1 | |
| PWC67773 | Noise Supression Filter | 1 | |
| PWC67882 | BRACKET UPPER INTERCOMPRESSOR CASE | 1 | |
| PWC67988 | COVER PRESSURE AGB | 1 | |
| PWC68563 | PULLER-ROTOR-HP COMPRESSOR H-4.4 | 1 | |
| PWC68952 | press. test adapter | 1 | |
| PWC69488 | COMPRESSION TOOL SEAL | 1 | |
| PWC69568 | Air press. Adapter | 1 | |
| PWC69670 | COMPRESSION TOOL | 1 | |
| PWC69671 | COMPRESSION TOOL | 1 | |
| PWC69836 | WAND, COMPRESSOR WASH | 7 | |
| PWC69875 | TIP WASH FIXTURE COMPRESSOR WASH | 1 | |
| PWC70184-5 | PRESSURE SCREW | 1 | |
| PWC70278 | COMPRESSOR ROTOR BALANCE WEIGHT PUNCH | 1 | |
| PWC70367 | FIXTURE, PRESSURE | 3 | |
| PWC70376 | Fixture Pressure | 4 | |
| PWC70425 | SUPPORT COMPRESSOR ROTOR ASSY | 1 | |
| PWC70594 | ADAPTER STATIC PRESSURE | 1 | |
| PWC70608 | Compressor | 1 | |
| PWC70721 | T5 PRESSURE TEST | 3 | |
| PWC70724 | Compressor | 1 | |
| PWC70803 | BASE, PRESS/TORQUE | 1 | |
| PWC70890 | pressure flush adapter | 1 | |
| PWC70900 | WRENCH COMPRESSOR STATOR | 1 | |
| PWC71180 | FLOOR H-FRAME PRESS | 1 | |
| PWC71312 | Ring Compressor | 1 | |
| PWC71314 | HYDRAULIC PRESS | 4 | |
| PWC71332 | RING COMPRESSOR | 3 | |
| PWC71378 | COMPRESSOR | 4 | |
| PWC71648 | SLING - LIFTING COMPRESSOR | 1 | |
| PWC71740 | PULLER- COMPRESSOR ROTOR ASSEMBLY | 1 | |
| PWC71776 | Fixture Holding Compressor | 3 | |
| PWC71874 | PRESSURE WASH ADAPTOR | 2 | |
| PWC71875 | PRESS WAS HADAPTOR | 3 | |
| PWC71886 | PRESSURE WASH ADAPTOR | 1 | |
| PWC71889 | PRESSURE WASH ADAPTOR | 1 | |
| PWC71890 | PRESSURE WASH ADAPTOR | 3 | |
| PWC71922 | Compressor | 1 | |
| PWC71952 | SLING LIFTING COMPRESSOR | 1 | |
| PWC72025 | PRESSURE FLUSH FIXTURE | 3 | |
| PWC72107 | COMPRESSOR TURBINE GRINDING FIXTURE | 3 | |
| PWC72324 | Fixture (Pressure Leak Test) | 4 | |
| PWC72331 | FIXTURE PRESSURE TEST | 1 | |
| PWC72720 | FIXTURE PRESSURE TEST | 4 | |
| PWC72898 | COMPRESSOR LIFTING | 1 | |
| PWC77106 | WRENCH,COMPRESSOR T | 3 | |
| PWC86345 | COMPRESSOR WASH RIG | 1 | |
| PWC86550 | NO 4 SCAVENGE PRESSURE S9770N00 | 1 | |
| PWC86551 | N°5 SCAVENGE PRESSURE | 1 | |
| PWC88418 | COMPRESSOR WASH RIG | 2 | |
| PWC89878 | ANVIL PRESSURE SETTING | 2 | |
| PWC89888 | COMPRESSOR WASH SYSTEM, MOBILE (ALTERNATE TO PWC64444) | 4 | |
| PWC89956 | COMPRESSOR ROTOR RIVET PUSHER | 1 | |
| PWC90007 | RING COMPRESSOR | 1 | |
| PWC90036 | Hand press | 1 | |
| PX406-32BI | PRESSURE SENSOR | 1 | |
| PX406-32BI PX409-15VI | PRESSURE SENSOR | 1 | |
| PX409-001DDUI | PRESSURE SENSOR | 1 | |
| PX409-005DDUI | PRESSURE SENSOR | 1 | |
| PX409-015VI | PRESSURE SENSOR | 1 | |
| PX409-1.0KGUSBH | PRESSURE TRANSDUCER 1000 PSI | 2 | |
| PX409-15VI | PRESSURE SENSOR | 1 | |
| PX409-32BI | PRESSURE SENSOR | 1 | |
| PX4201-5KGV | PRESSURE TRANSDUCER WITH PA-34 ADAPT | 1 | |
| PX91 | PRESSURE TRANSDUCER - 0-5000 PSI | 1 | |
| PYLON OV/PRESS VALVE | ENG. PNU PYLON OV. PRESS VAL TOOL | 1 | |
| Q-4907 | PRESSURE GAUGE | 1 | |
| Q100-3500PSI | PRESSURE GAUGE AND HOSE ASSY 20 FT | 1 | |
| Q3D-1/4 | GAUGE, PRESSURE, 0 - 100 PSI, 2" FACE, 1/4" BOTTOM MOUNT, DRY, STAINLESS STEEL CASE, STAINLESS STEEL INTERNALS | 1 | |
| Q46498 | COMPRESSION TOOL | 7 | |
| Q47963 | COMPRESSION TOOL | 7 | |
| QA05984-TT | INDICATOR DIFFERENTIAL PRESSURE ADAPTOR | 1 | |
| QA07739-02 | RESERVOIR-PRESSURE UNIT | 1 | |
| QA6498 | COMPRESSION TOOL | 1 | |
| R-20561-2-TF1-1 | Screw – Pressure Test | 1 | |
| R-L290P7002101 | HYDROTECHNIK PRESS. MONITOR | 1 | |
| R01 | 4 HP, 80Gal 2 Stage Compressor | 1 | |
| R04-200-RNKA | REGULATOR PRESSURE | 1 | |
| R07-200-RNKG | PRESSURE BALANCE | 1 | |
| R10704-1-O2 | REPAIR KIT-HIGH PRESSURE SEAL SYSTEM, GAS BOOSTERS, OXYGEN SERVICE | 1 | |
| R1500 | DRILL PRESS | 2 | |
| R1736 | ADAPTER FOR PRESSURE TEST VALVE) | 1 | |
| R21820000 | NG SH ABS COMPRESSION TOOL | 6 | |
| R3067X6 | PRESS C DEEP THROAT G CLAMPS | 1 | |
| R364-02CG | PRESSURE GUAGE | 1 | |
| R412006109 | PRESSURE REGULATOR 1/4" | 1 | |
| R47226 | COMPRESSION TOOL | 1 | |
| R47960 | SUPPORT-COMPRESSION | 1 | |
| R47961 | TOOL-COMPRESSION | 1 | |
| R50001T04 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| R50001T10 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| R50001T12 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| R50001T16 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| R50001T20 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| R530-70000-000W6700-01 | PRESSURE TEST DEVICE | 1 | |
| R73G-2GK-RMN | Pressure Reducer 0.5-10 BAR | 1 | |
| R80101T04 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT)（REPAIR SYSTEM） | 8 | |
| R80101T05 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT)（REPAIR SYSTEM） | 4 | |
| R81101T04 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO ARCSEAL-FEMALE)（REPAIR SYSTEM） | 1 | |
| R81101T05 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO ARCSEAL-FEMALE)（REPAIR SYSTEM） | 1 | |
| R81121T04 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO ARCSEAL-MALE)（REPAIR SYSTEM） | 1 | |
| R81121T05 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO ARCSEAL-MALE)（REPAIR SYSTEM） | 1 | |
| RA 9501 | DIGITAL TYRE PRESSURE GUAGE (STD-1132) | 1 | |
| RA0001D16 | LOW PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| RA0001D20 | LOW PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| RAM DIA-60 MM | HYDRAULIC PRESSURE GAUGE @ TYRE BAY | 1 | |
| RAW BAC1489-272 | DEPRESSOR - SEAL | 1 | |
| RB T101262-105 | Presser Assembly | 1 | |
| RB T101599 | Pressing Tool | 3 | |
| RB T101607 | Pressure Default Tool | 1 | |
| RB T101620 | Seal Press Ring | 1 | |
| RB T101621 | Press Ring Seal | 1 | |
| RB T101859 | Press Adapter, Bearing Inner Ring | 1 | |
| RB T101925 | Bearing Ring Press | 1 | |
| RB T101930 | Outer Race Ring Press | 1 | |
| RB T101932 | Ring Press | 1 | |
| RB T102007 | Seal & Retainer Ring Press | 1 | |
| RB T103129 | Press Assembly | 1 | |
| RB T103323-101 | PRESS-SHAFT BAR | 2 | |
| RB0006-809-00074 | Press Staked Bearing Staking Set | 1 | |
| RB0006-809-00090-1 | Arbor Press | 2 | |
| RB0006-809-00090-8 | Arbor Press For 369A7951-15 & C5050-61 Bearing | 2 | |
| RB0006-809-00671 | Arbor Press Fixture Tail Rotor Gearbox Housing | 1 | |
| RB211-535E4-37/14 | REMOVE INTERMEDIATE AND LOW PRESSURE TUBIN MODULE | 1 | |
| RB23002210 | Compressor Rotor Balance Correction Fixture | 2 | |
| RB23002211 | Wrench Removal & Install Compression Bleed Valve | 2 | |
| RB23005023 | Puller, Bearing & Sal Ring, Front Compressor | 2 | |
| RB23006302 | Fixture, Pressure Test, Power Turbine Rotor | 2 | |
| RB23006303 | Fixture, Pressure.Test, Power Turbine Rotor | 1 | |
| RB23006784 | Guide Install Coupling Turbine To Compressor | 2 | |
| RB23008673 | Compressor Rotor Spline Adapter | 2 | |
| RB23033026 | Nut, Clamp, Compressor Rotor Assembly Fixture | 1 | |
| RB23033027 | Puller-Bearing & Mating Seal Race-Frt Compressor | 2 | |
| RB23033028 | Fixture-Checking-Compressor Rotor Tie Bolt Stretch | 1 | |
| RB23033029 | Fixture-Alignment-Compressor Rotor Frt | 1 | |
| RB23033030 | Drift-Installation Compressor Frt Bearing Inner Race | 2 | |
| RB23033032 | Drift-Compressor Front Bearing Outer Race | 2 | |
| RB23033033 | Drift-Guided-Compressor Front Bearing Ring Seal | 2 | |
| RB23033034 | Puller-Compressor Front Bearing Outer Race | 2 | |
| RB23033035 | Puller-Compressor Front Bearing Ring Seal | 2 | |
| RB23033036 | Fixture-Separating Compressor Rotor | 1 | |
| RB23033037 | Holder-Compressor Rotor Coupling Adapter | 1 | |
| RB23034275 | Adapter-Pilot, Rear Compressor Bearing Puller | 1 | |
| RB23034393 | Fixture-Alignment Compressor Shroud | 1 | |
| RB23034394 | Fixture-Retaining Compressor Rotor Balance | 1 | |
| RB23055347 | Fixture-Inspection Frt. Compressor Support Assembly | 2 | |
| RB40- 60101110 | COMPRESSION RIVETER ALLIGATOR JAW TYPE | 1 | |
| RB42- 60103110 | COMPRESSION RIVETER C YOKE TYPE | 1 | |
| RB6795586 | Compression Rear Bearing Retaining Spanner | 2 | |
| RB6795590-3A | Finger Tip, Bearing Puller; Gas Producer Turbine, Power Turbine & Compressor | 2 | |
| RB6795590-3B | Finger, Bearing Puller; Gas Producer Turbine, Power Turbine & Compressor | 2 | |
| RB6795591 | Compressor Rear Bearing & Seal Installation Pusher | 1 | |
| RB6795594 | Fixture-Assembly, Compressor Rotor | 2 | |
| RB6795596-M | Compression Rotor Disassembly/Assembly Tool C20/C20B | 2 | |
| RB6795966 | COMPRESSOR DISASEMBLY FIXTURE | 2 | |
| RB6796950-10 | Pressing Plate | 2 | |
| RB6796950-11 | Pressing Plate | 2 | |
| RB6796950-12 | Pressing Plate | 2 | |
| RB6796950-13 | Pressing Plate | 2 | |
| RB6796950-14 | Pressing Plate | 2 | |
| RB6796950-23 | Pressing Plate | 2 | |
| RB6796950-4 | Pressing Plate | 2 | |
| RB6796950-5 | Pressing Plate | 2 | |
| RB6796950-6 | Pressing Plate | 3 | |
| RB6796950-7 | Pressing Plate | 3 | |
| RB6796950-8 | Pressing Plate | 2 | |
| RB6796952 | Forward Bearing & Seal Compressor Puller | 1 | |
| RB6798048 | Pressure Oil Pump Body Bushing Ring | 2 | |
| RB6798051 | Pressure Oil Pump Body Bushing Pin Jig | 2 | |
| RB6798796 | Damper Vibration Compressor Frt Bearing Drift | 2 | |
| RB6798803 | Compressor Rear Labyrinth Rotating Seal Drift | 2 | |
| RB6798807 | Compressor Lube Oil Filter Popup Val | 2 | |
| RB6798927 | Compressor Impeller Assembly | 3 | |
| RB6799700 | Puller-Vibration Damper, Compressor Front Bearing | 2 | |
| RB6799841 | Press Oil Turbine Power Support Tube Assembly Cleaner Brush | 1 | |
| RB6799952 | CLAMP INSTALLATION COMPRESSOR DISCHARGE AIR TUBE TO OUTER COMBUSTION CASE | 2 | |
| RB6799953 | Install Compressor Scroll To Air Duct Clamp | 2 | |
| RB6872162 | Sump Assembly Pressure Test Fixture | 1 | |
| RB6872533 | Installation & Removal Compression Tie Bolt | 1 | |
| RB6872534 | Aligning Compressor Rotor Fixture | 2 | |
| RB6872539 | Compressor Vibration Pickup Mounting Bracket | 2 | |
| RB6872543 | PRESS INSTALLATION POWER TURBINE REAR AND GAS PRODUCER TURBINE FRONT BEARING | 2 | |
| RB6872550 | Compressor Rotor Coupler Adapter Holder | 1 | |
| RB6872691 | Compressor Rotor Impeller Mask | 2 | |
| RB6872832 | Compressor Adapter Coupling Puller | 2 | |
| RB6872880 | Compressor Mounting Inserts Checking Fixture | 2 | |
| RB6872881 | Compressor Mounting Insert Wrench | 2 | |
| RB6872882 | WRENCH----COMPRESSOR MOUNTING INSERTS (GEARBOX) | 2 | |
| RB6872927 | WRENCH----COMPRESSOR MOUNTING FLANGED STUDS | 2 | |
| RB6873066 | Compressor Axis Alignment Fixture | 2 | |
| RB6886204-A | Bleed Valve Wedge, Compressor Protection | 2 | |
| RB6889889 | Bearing Power Turbine & Compressor Puller | 3 | |
| RB6889890 | Puller-Compressor Rear Bearing Outer Ring | 2 | |
| RB6889891 | Rotor Splined Compressor Holder | 3 | |
| RB6891195 | Puller, Compressor Rotor Splined Adapter | 2 | |
| RB6891196 | Power Turbine Rotating Seal & Bearing Press | 2 | |
| RB6893360 | Compressor Fixture Assembly | 2 | |
| RB6893377 | Bearing Press | 2 | |
| RB6893382 | Compressor Rotor Spline, Concentricity Checking Adapter | 1 | |
| RB6893383 | Fixture, Compression Axis Alignment | 2 | |
| RB6893535 | Compressor Carbon Seat Ret | 2 | |
| RB6893700 | No. 8 Bearing Press | 3 | |
| RB6893731 | Compressor Vibration Pickup Mounting Bracket | 1 | |
| RB6893734 | Compressor Rear Bearing Wrench | 2 | |
| RB6893735 | Drift-Compressor Rear Labyrinth | 1 | |
| RB6893736 | Aligning Compressor Rotor | 1 | |
| RB6893737 | FIXTURE SELECTOR, REAR COMPRESSOR SEAL VENT ORIFICE | 2 | |
| RB6893738 | Compressor Carbon Seal Ret Ring Plier | 2 | |
| RB6893739 | Puller-Rear Compressor Bearing Oil Slinger & Seal | 2 | |
| RB6895528 | Rear Compressor Bearing Pusher | 1 | |
| RB6895538 | Press-Gas Producer Turbine Rotor | 2 | |
| RB6895994 | Compressor Discharge Air Tube Pressure Test Fixture | 1 | |
| RB6895995-3 | Fixture-Alignment Compressor Rotor (2 Piece) | 1 | |
| RB6895995-4 | Fixture-Alignment Compressor Rotor (2 Piece) | 2 | |
| RB6897425 | Compressor Vibration Pickup Mounting Bracket | 2 | |
| RB6898412 | Compressor Seal Spring Plate | 2 | |
| RB6899940 | Bleed Air Manifold Assembly Compressor Shroud Puller | 1 | |
| RBA7300-507-ATP1 | Bungee Compression Tool | 1 | |
| RBD29985 | Bungee Spring Compressor Tool Rod & Channel | 2 | |
| RBE105-14101 W7 | PRESSING-IN TOOL | 2 | |
| RBE105-14101W18 | PRESSING-IN TOOL | 2 | |
| RBE105-14181W2 | PRESSING-IN TOOL | 2 | |
| RBE105-31501W2 | PRESSING-IN AND PUSHING-OUT DEVICE | 1 | |
| RBE105-31702W25 | PRESSING TOOL | 1 | |
| RBE105-31702W4 | PRESSING-IN & PRESSING-OUT TOOL | 2 | |
| RBE105-42124W1 | PRESSING-IN TOOL | 2 | |
| RBE105-42124W3 | PRESSING-IN TOOL | 2 | |
| RBE1120-31502W1 | PRESSING-IN AND PUSHING-OUT DEVICE | 1 | |
| RBE1120-31547W1 | PRESSING-IN TOOL | 2 | |
| RBE117-15004W6 | PUSH OUT / PRESS IN TOOL | 2 | |
| RBE117-30002W2 | PRESSING-IN TOOL | 2 | |
| RBE117-44115W1 | PRESSING-IN TOOL | 2 | |
| RBE1X54-176-875 | Press Tool | 2 | |
| RBE1X56-136-916 | PRESSURE PIECE | 2 | |
| RBE671000702 | Press Staking Tool | 1 | |
| RBEM210V4000103 | PULLEY COMPRESSOR RIGGING KIT | 2 | |
| RBEVR-L11-0010-002-2 | Press Tool | 2 | |
| RBEVR-L11-0010-004-B | Press Tool | 1 | |
| RBEVR-L11-0010-005-B | Press Tool | 1 | |
| RBSC4101-4 | Drill Press Bearing Cutter | 2 | |
| RBSC4101-5 | DRILL PRESS BEARING CUTTER | 2 | |
| RBSC4101-7 | Drill Press Bearing Cutter | 1 | |
| RBSC4103-10 | Drill Press Bearing Cutter | 1 | |
| RBSC4103-6 | Drill Press Bearing Cutter | 2 | |
| RBSC7029 | Drill Press Bearing Cutter | 2 | |
| RBSC7048 | Drill Press Bearing Cutter | 2 | |
| RBSC7050 | Drill Press Bearing Cutter | 2 | |
| RBSC7051 | Drill Press Bearing Cutter | 2 | |
| RBSC7188 | Drill Press Bearing Cutter | 2 | |
| RBSC7205 | Drill Press Bearing Cutter | 2 | |
| RBSC7245 | Drill Press Bearing Cutter | 1 | |
| RBST1000 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST1001 | Drill Press Tri-Roller Staking Tool | 1 | |
| RBST1002 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST1003 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST1004 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST1005 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST1006 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST1007 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST1008 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST1009 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST1010 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST1011 | Drill Press Tri-Roller Staking Tool | 1 | |
| RBST1012 | Drill Press Tri-Roller Staking Tool | 1 | |
| RBST1013 | Drill Press Tri-Roller Staking Tool | 1 | |
| RBST1014 | Drill Press Tri-Roller Staking Tool | 1 | |
| RBST1015 | Drill Press Tri-Roller Staking Tool | 1 | |
| RBST1016 | Drill Press Tri-Roller Staking Tool | 3 | |
| RBST1017 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST1018 | Drill Press Tri-Roller Staking Tool | 1 | |
| RBST1019 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST1020 | Drill Press Tri-Roller Staking Tool | 1 | |
| RBST1034 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST1035 | Drill Press Tri-Roller Staking Tool | 1 | |
| RBST2001 | Drill Press Tri-Roller Staking Tool | 1 | |
| RBST2012 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST2014 | Drill Press Tri-Roller Staking Tool | 1 | |
| RBST2015 | Drill Press Tri-Roller Staking Tool | 1 | |
| RBST2017 | Drill Press Tri Roller Staking Tool | 2 | |
| RBST2020 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST2058 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST2059 | Drill Press Tri-Roller Staking Tool | 1 | |
| RBST2071 | Drill Press Tri-Roller Staking Tool | 1 | |
| RBST2087 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST2089 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST2120 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST2128 | Drill Press Tri-Roller Staking Tool | 3 | |
| RBST2162 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST2345 | Drill Press Tri-Roller Staking Tool | 3 | |
| RBST2369 | Drill Press Tri-Roller Staking Tool | 1 | |
| RBST2417 | Drill Press Tri-Roller Staking Tool | 1 | |
| RBST2939 | Drill Press Tri-Roller Staking Tool | 1 | |
| RBST2940 | Drill Press Tri-Roller Staking Tool | 1 | |
| RBT18562 | Main Rotor Trunnion Bearing Inner Race Pressing Plate | 1 | |
| RBT18563 | Trunnion Bearing Pressing Plug | 1 | |
| RBT18633 | Pressing Tool Work Aid | 1 | |
| RBT18639 | Bearing Race Press | 1 | |
| RBT18648 | Lead Lag Dampener Bearing Press | 2 | |
| RBT18654 | Output Shaft Bearing Pressing Cylinder Work Aid | 1 | |
| RBT18655 | Input Pinion Bearing Pressing Cylinder Work Aid (206 A/B) | 1 | |
| RBT18717 | Compressor Case Wrench Set (250-C20 Engine Series) | 3 | |
| RBT18717-03 | Compressor Wrench Weldment Assembly | 1 | |
| RBT200201 | Output Shaft Bearing Pressing Cyl. | 1 | |
| RBT200203 | Input Pinion Bearing Press Cyl. | 1 | |
| RBT400318 | Pressing Tool Set, Bearing Install | 1 | |
| RBT400348 | Press Sleeve | 1 | |
| RBT400363 | Press Plate | 1 | |
| RBW2905G00332-3G | Adapter Assembly, Pcm Pressure Line | 2 | |
| RBW6500X01611-W142F-3T | Oil Seal Removal Press Tool | 2 | |
| RBW6500X01611-W142H-3T | Tail Rotor Gear Box Output Oil Seal Removal & Press Tool | 1 | |
| RBW6510A00436W142B-3T | Bearing Assembly Press/Support Tool | 1 | |
| RBW6521A00138-W142G-3T | INPUT OIL SEAL REMOVAL PRESS TOOL, IGB INPUT | 2 | |
| RBW6521A00138-W142H-3T | Input Oil Seal Insert Press Tool, Igb Input | 1 | |
| RBW6521A00138-W142P-3T | Oil Seal Assembly Press Tool | 1 | |
| RBW6521A00138W142G-3T | Input Oil Seal Removal Press Tool, Igb Input | 2 | |
| RBW6521A00138W142K-3T | Press Tool | 1 | |
| RBW6521A00146W142C- 3T | SEAL PRESS TOOL | 2 | |
| RBW6521A00146W142C-3T | Seal Press Tool | 2 | |
| RBW6522A00231-W142AK-3T | Tail Rotor Gear Box/Mast Output Oil Seal Assembly Press Tool | 1 | |
| RBW6522A00231-W142H-3T | Tail Rotor Gear Box Input Oil Seal Removal And Press Tool | 1 | |
| RBW6522A00231W142G-3T | Press Tool | 1 | |
| RBW7505G00132-3G | Pressure Test, EAPS Hose, Size 10 | 2 | |
| RBW895-3130- 02-101 | PRESSING TOOL,BUSHING | 2 | |
| RBWAAB0026 | TORQUE SOCKET, M/R AND T/R SERVOACTUATOR PRESS (GF-95-00) | 3 | |
| RC-10 | "PROTECTIVE CAPS PRESSURE SWITCH CONNECTOR | 1 | |
| RC-14 | PRESSURE SWITCH CONNECTOR | 1 | |
| RC-980 | PISTON RING COMPRESSOR | 2 | |
| RC106 | PRESS PUMP | 2 | |
| RC331931G03 | PRESSURE & VACUUM TESTER ,IGGS (NEO) | 1 | |
| RC971MF078 | DIFFERENTIAL PRESSURE SWITCH | 1 | |
| RCF67-06 | REGULATR,- PRESSURE | 6 | |
| RCF67-06 | REGULATOR, PRESSURE, OXY | 6 | |
| RCF6706 | REGULATOR-PRESSURE | 6 | |
| RCF6708 | REGULATOR-XMTR-PRESSURE | 1 | |
| RCF6717 | REGULATOR, PRESSURE | 1 | |
| RDM/25L | TYRE PRESSURE GAUGE 0-360 | 1 | |
| REGULATOR LOW | LOW PRESSURE REGULATOR | 1 | |
| RF170059 | TIRE PRESSURE GAUGEINFLATION TOOL | 1 | |
| RF177843 | PRESSURE GAUGE | 1 | |
| RF377 | COMPRESSION MEASURING TOOL | 1 | |
| RF9820-DEK | PRESSING TOOL | 1 | |
| RFM910-BW33.3 | TIRE INFLATION KIT With PRESSURE GAUGE | 2 | |
| RFM910RF80-25 | TIRE INFLATION KIT With PRESSURE GAUGE | 2 | |
| RFM930RF80-25 | TYRE INFLATION PRESSURE GAUGE | 1 | |
| RFM940RF80-25 | TIRE INFLATION KIT With PRESSURE GAUGE | 3 | |
| RFM950RF80-25 | GAUGE - TIRE PRESSURE, 0-300 PSIG | 1 | |
| RFMYA100LT025 | ENGINE COMPRESSOR WATER TOOL | 1 | |
| RHA2134 | AFG6 High Pressure Hose Assembly 2m 4G1 Hose, XF Coupling to 8V1 Screw-On Connector | 1 | |
| RHA2135 | AFG6 High Pressure Hose Assembly 2m 4G1 Hose, XF Coupling to 12V1 Screw-On Connector | 1 | |
| RHA2136 | AFG6 High Pressure Hose Assembly 2m 4G1 Hose, XF Coupling to Single Clip-On Connector | 1 | |
| RHA2152 | AFG6 High Pressure Hose Assembly, 2m 4G1 Hose, XF Coupling to Euro 12V1 Connector | 1 | |
| RI-40N | PRESSURE REGULATING VALVE, FOR AIRCRAFT. | 1 | |
| RIDGID 1450 | PRESSURE TEST PUMP | 1 | |
| RJ-014 | OIL PRESS TRANSMITTER (146/RJ) | 1 | |
| RJ-100 | GAGE 20 BAR (290 PSI) - PRESSURE, TIRE | 1 | |
| RJ-300 | PRESSURE REGULATING VALVE ASSEMBLY FOR USE IN AERONAUTICS | 1 | |
| RKC4101-14DP | DRILL PRESS TRI-ROLLER SWAGING TOOL | 1 | |
| RKH0303 | ONLY HYDRAULIC PRESSURE GAUGES | 1 | |
| RKH0304 | ONLY HYDRAULIC PRESSURE GAUGES | 1 | |
| RM-18-LG | TIRE PRESSURE GAUGE | 2 | |
| RM-18K-L-LG-TS | TIRE PRESSURE TESTER 0-18 BAR /0-260 PSI | 2 | |
| RM/18 | PRESSURE GAUGE 18BAR / 270PSI | 1 | |
| RM/18K | TIRE PRESSURE GAUGE | 2 | |
| RM/18K- L/LG/TS | STD-1132/TIRE PRESSURE GAUGE | 2 | |
| RM/18K-6 | TIRE PRESSURE GAUGE | 1 | |
| RM/18K-6L/LG/TS | TIRE PRESSURE GAUGE | 2 | |
| RM/18K-L-LG-TS | Tire Pressure Gage | 2 | |
| RM/18K-L/LG/TS | PRESSURE GAUGE | 2 | |
| RM/18L | TYRE PRESSURE GAUGE - SPARE COUPLING - VG8 | 2 | |
| RM/18LG | TIRE PRESSURE GAUGE | 2 | |
| RM18K-LLGTS | PRESSURE GAUGE | 2 | |
| RM18L | TIRE PRESSURE GAUGE | 2 | |
| RMF27003-C-012,000H7X012,0-P6-F | BUSHING,GUIDE PIN, PRESS FIT TYPE | 1 | |
| RM\18K-L\LG\TS | PRESSURE GAUGE | 2 | |
| RN87040 | PRESSURE REDUCER NITROGEN BAJA 4000-1400 PSI | 1 | |
| RN87170 | PRESSURE REDUCER NITROGEN 4000 PSI | 1 | |
| ROC30959 | MODIFIED PRESSURE SCREW | 1 | |
| ROC472011 | CAMSHAFT BRUSHING PRESS | 1 | |
| ROC476067 | RING COMPRESSOR | 1 | |
| ROC494085 | RING COMPRESSOR | 1 | |
| ROC494503 | COMPRESSION ADAPTOR | 1 | |
| ROC495403 | COMPRESSION ADAPTOR | 1 | |
| ROC8M0063321 | COMPRESSOR END CAP TOOL | 1 | |
| ROLLER FIXTURE | HAND FED DRILL PRESS | 1 | |
| RPM3 A0050 | REFERENCE PRESSURE MONITOR | 1 | |
| RPM4-AD A350KA/A160KA | REFERENCE PRESSURE MONITOR | 1 | |
| RPS1-B | XMITTER-OIL PRESS | 5 | |
| RPS8100 | PRESSURE SENSOR (DRUCK) | 1 | |
| RPS8100055B109M1836 | PRESSURE SENSOR (35~1100 MBAR ABS) (BAKER HUGHES/ GE DRUCK) | 1 | |
| RR1022233 | 5 MHZ TWIN CRYSTAL COMPRESSION WAVE ULTRASONIC PROBE | 1 | |
| RR1702388 | EPR PRESSURE HOSE (GDC10144) | 1 | |
| RRD TOOL NUMBER: | PRESSURE FILL ADAPTER KIT | 1 | |
| RRT025819 | COVER - DUST COVER FOR USE DURING IP COMPRESSOR MODULE BUILD. | 1 | |
| RRT026588 | SPANNER - RUNDOWN FAN CURVIC BOLTS. THIS IS POWERED BY COMPRESSED AIR. | 1 | |
| RRT027423 | PRESS BASE | 1 | |
| RRT027424 | PRESS RING | 1 | |
| RRT027431 | PRESS BASE | 1 | |
| RRT027432 | PRESS RING | 1 | |
| RRT027439 | SEAL HOUSING PRESS | 1 | |
| RRT027489 | PRESS RING | 1 | |
| RRT027902 | PRESS TOOL | 1 | |
| RRT027905 | ADAPTOR, PRESS, HOUSING | 1 | |
| RRT027912 | PRESS ADAPTOR | 1 | |
| RRT027918 | PRESS SLEEVE | 1 | |
| RRT027919 | PRESS TOOL | 1 | |
| RRT027933 | PRESS ADAPTOR | 1 | |
| RRT028139 | LIFT TOOL - LIFT HP COMPRESSOR OUTER CASE FROM THE REAR | 1 | |
| RRT028286 | PRESS TOOL | 1 | |
| RRT028287 | PRESS TOOL | 1 | |
| RRT028292 | PRESS,TURN & EXTRACT TOOL | 1 | |
| RRT028298 | PRESS RING | 1 | |
| RRT028299 | PRESS TOOL | 1 | |
| RRT028303 | PRESS AND EXTRACTION TOOL | 1 | |
| RRT028307 | PRESS RING | 1 | |
| RRT028309 | PRESS RING | 1 | |
| RRT028310 | PRESS RING | 1 | |
| RRT028314 | PRESS TOOL | 1 | |
| RRT028315 | PRESS RING | 1 | |
| RRT028316 | PRESS RING | 1 | |
| RRT028322 | PRESS TOOL | 1 | |
| RRT028326 | PRESS RING | 1 | |
| RRT028502 | IP COMPRESSOR STAGE 3 VANE STOP ALIGNMENT TOOL | 1 | |
| RRT028503 | IP COMPRESSOR STAGE 4 VANE STOP ALIGNMENT TOOL | 1 | |
| RRT028505 | IP COMPRESSOR STAGE 8 VANE STOP ALIGNMENT TOOL | 1 | |
| RRT029197 | PRESS RING | 1 | |
| RRT029433 | ADAPTOR - LIFT BLADED OR NON BLADED LP COMPRESSOR | 1 | |
| RRT029440 | PRESS & EXTRACTION TOOL | 1 | |
| RRT030670 | COMPRESSION TOOL KIT AND RESIZER | 1 | |
| RRT030671 | COMPRESSION TOOL KIT AND RESIZER | 1 | |
| RRT046909 | PRESS TOOL | 1 | |
| RRT046961 | TURNING TOOL - ROTATE HP COMPRESSOR FOR BORESCOPE INSPECTION | 3 | |
| RRT046961-1 | TURNING TOOL - ROTATE HP COMPRESSOR FOR BORESCOPE INSPECTION | 2 | |
| RRT050046 | PRESS ADTP | 1 | |
| RRT050494 | LP COMPRESSOR CASE GROUP ASSEMBLY REMOVE PROCEDURE (VERTICAL BUILD METHOD) | 1 | |
| RRT050702 | PRESS RING | 1 | |
| RRT050764 | PRESS RING | 1 | |
| RRT053188 | PRESS RING | 1 | |
| RRT053191 | PRESS ADPT | 1 | |
| RRT057486 | PRESS ADPT | 1 | |
| RRT057487 | PRESS T/L | 1 | |
| RRT058599 | OIL PRESSURE FILL | 6 | |
| RRT072428 | PRESSURE FILL ADAPTER KIT | 3 | |
| RRT078774 | BELLOWS COMPRESSOR | 1 | |
| RRT079532 | PRESS POT | 1 | |
| RRT079986 | LP COMPRESSOR SHAFT - SLAVE SHAFT | 1 | |
| RRT080100 | PRESS RING | 1 | |
| RRT081634 | BALANCING SIMULATOR - HP COMPRESSOR / TURBINE | 1 | |
| RRT081692 | LP COMPRESSOR SHAFT - SLAVE SHAFT | 1 | |
| RRT095118 | Pressing Tool | 1 | |
| RRT095945 | IP COMPRESSOR TURNING TOOL | 2 | |
| RRT095945-1 | TURNING TOOL, IP COMPRESSOR VIA GEARBOX BREATHER | 1 | |
| RRT1011655 | COMPRESSION TOOL | 1 | |
| RRT101655 | COMPRESSION TOOL | 1 | |
| RRT115481 | PRESS TOOL | 1 | |
| RRT116163 | EDM NOTCHED LP COMPRESSOR BLADE | 1 | |
| RRT116296 | CASTELLATED PRESS TOOL | 1 | |
| RSC08.1251 | MALE THREADS SOCKET FOR COMPRESSED AIR | 1 | |
| RSE1139 | PRESSURE RING | 1 | |
| RSE1139 REV NC | PRESSURE RING | 1 | |
| RSE1165 | ADAPTER DOOR PRESSUR | 12 | |
| RSE1234 | ADAPTOR, TORQUE T/R PRESSURE RELE.IF LATCH | 17 | |
| RSE7207 | PLUG, SAFETY, LOWER FAN COWL PRESSURE RELIEF DOOR | 3 | |
| RSE7207 REV A | PLUG, SAFETY, LOWER FAN COWL PRESSURE RELIEF DOOR | 1 | |
| RSM20 | LOW PRESSURE REGULATOR W/HOSE | 1 | |
| RST1000 | TOOL, DRILL PRESS SWAGING | 2 | |
| RST1001 | TOOL, DRILL PRESS SWAGING | 1 | |
| RST1002 | TOOL, DRILL PRESS SWAGING | 3 | |
| RST1003 | TOOL, DRILL PRESS SWAGING | 2 | |
| RST1004 | TOOL, DRILL PRESS SWAGING | 2 | |
| RST1005 | TOOL, DRILL PRESS SWAGING | 3 | |
| RST1006 | TOOL, DRILL PRESS SWAGING | 3 | |
| RST1007 | TOOL, DRILL PRESS SWAGING | 3 | |
| RST1008 | TOOL, DRILL PRESS SWAGING | 2 | |
| RST1009 | TOOL, DRILL PRESS SWAGING | 2 | |
| RST1009LF1ST | TOOL, DRILL PRESS SWAGING | 1 | |
| RST1010 | TOOL, DRILL PRESS SWAGING | 2 | |
| RST1011 | TOOL, DRILL PRESS SWAGING | 2 | |
| RST1012 | TOOL, DRILL PRESS SWAGING | 2 | |
| RST1013 | TOOL, DRILL PRESS SWAGING | 2 | |
| RST1014 | TOOL, DRILL PRESS SWAGING | 2 | |
| RST1015 | TOOL, DRILL PRESS SWAGING | 2 | |
| RST1016 | TOOL, DRILL PRESS SWAGING | 2 | |
| RST1017 | TOOL, DRILL PRESS SWAGING | 2 | |
| RST1018 | TOOL, DRILL PRESS SWAGING | 2 | |
| RST1019 | TOOL, DRILL PRESS SWAGING | 2 | |
| RST1020 | TOOL, DRILL PRESS SWAGING | 2 | |
| RST1034 | TOOL, DRILL PRESS SWAGING | 1 | |
| RST1037 | DRILL PRESS | 1 | |
| RST1050 | DRILL PRESS | 1 | |
| RST1051 | DRILL PRESS | 1 | |
| RST1052 | DRILL PRESS | 2 | |
| RST1053 | DRILL PRESS | 2 | |
| RST1054 | DRILL PRESS | 2 | |
| RST1055 | DRILL PRESS | 1 | |
| RST1056 | DRILL PRESS | 1 | |
| RST1057 | DRILL PRESS | 1 | |
| RST2001 | DRILL PRESS | 1 | |
| RST2003 | DRILL PRESS | 1 | |
| RST2005 | DRILL PRESS | 1 | |
| RST2010 | DRILL PRESS | 1 | |
| RST2011 | DRILL PRESS | 1 | |
| RST2012 | DRILL PRESS | 2 | |
| RST2013 | DRILL PRESS | 1 | |
| RST2014 | TOOL, DRILL PRESS SWAGING | 1 | |
| RST2015 | DRILL PRESS | 1 | |
| RST2017 | DRILL PRESS | 2 | |
| RST2018 | DRILL PRESS | 2 | |
| RST2019 | DRILL PRESS | 1 | |
| RST2021 | DRILL PRESS | 1 | |
| RST2022 | DRILL PRESS | 1 | |
| RST2024 | DRILL PRESS | 1 | |
| RST2025 | DRILL PRESS | 1 | |
| RST2026 | DRILL PRESS | 1 | |
| RST2027 | DRILL PRESS | 1 | |
| RST2028 | DRILL PRESS | 1 | |
| RST2029 | DRILL PRESS | 1 | |
| RST2030 | DRILL PRESS | 1 | |
| RST2031 | DRILL PRESS | 1 | |
| RST2032 | DRILL PRESS | 1 | |
| RST2033 | DRILL PRESS | 1 | |
| RST2036 | DRILL PRESS | 1 | |
| RST2037 | DRILL PRESS | 1 | |
| RST2039 | DRILL PRESS | 1 | |
| RST2041 | DRILL PRESS | 1 | |
| RST2044 | DRILL PRESS | 1 | |
| RST2046 | DRILL PRESS | 1 | |
| RST2048 | DRILL PRESS | 2 | |
| RST2058 | DRILL PRESS | 2 | |
| RST2059 | DRILL PRESS | 1 | |
| RST2060 | DRILL PRESS | 1 | |
| RST2061 | DRILL PRESS | 1 | |
| RST2062 | DRILL PRESS | 1 | |
| RST2063 | DRILL PRESS | 1 | |
| RST2064 | DRILL PRESS | 1 | |
| RST2065 | DRILL PRESS | 1 | |
| RST2067 | DRILL PRESS | 1 | |
| RST2069 | DRILL PRESS | 1 | |
| RST2070 | DRILL PRESS | 1 | |
| RST2071 | DRILL PRESS | 1 | |
| RST2075 | DRILL PRESS | 1 | |
| RST2079 | DRILL PRESS | 1 | |
| RST2080 | DRILL PRESS | 1 | |
| RST2084 | DRILL PRESS | 1 | |
| RST2085 | DRILL PRESS | 1 | |
| RST2086 | DRILL PRESS | 1 | |
| RST2087 | DRILL PRESS | 1 | |
| RST2089 | DRILL PRESS | 1 | |
| RST2090 | DRILL PRESS | 1 | |
| RST2091 | DRILL PRESS | 1 | |
| RST2093 | DRILL PRESS | 1 | |
| RST2095 | DRILL PRESS | 1 | |
| RST2096 | DRILL PRESS | 1 | |
| RST2099 | DRILL PRESS | 1 | |
| RST2100 | DRILL PRESS | 1 | |
| RST2101 | DRILL PRESS | 1 | |
| RST2102 | DRILL PRESS | 1 | |
| RST2103 | DRILL PRESS | 2 | |
| RST2104 | DRILL PRESS | 1 | |
| RST2105 | DRILL PRESS | 1 | |
| RST2106 | DRILL PRESS | 1 | |
| RST2107 | DRILL PRESS | 1 | |
| RST2108 | DRILL PRESS | 1 | |
| RST2110 | DRILL PRESS | 1 | |
| RST2111 | DRILL PRESS | 1 | |
| RST2113 | DRILL PRESS | 1 | |
| RST2115 | DRILL PRESS | 1 | |
| RST2116 | DRILL PRESS | 2 | |
| RST2118 | DRILL PRESS | 1 | |
| RST2119 | DRILL PRESS | 2 | |
| RST2120 | DRILL PRESS | 2 | |
| RST2122 | DRILL PRESS | 1 | |
| RST2123 | DRILL PRESS | 1 | |
| RST2124 | DRILL PRESS | 1 | |
| RST2125 | DRILL PRESS | 1 | |
| RST2126 | DRILL PRESS | 1 | |
| RST2127 | DRILL PRESS | 1 | |
| RST2128 | DRILL PRESS | 2 | |
| RST2129 | DRILL PRESS | 1 | |
| RST2130 | DRILL PRESS | 1 | |
| RST2131 | DRILL PRESS | 1 | |
| RST2134 | DRILL PRESS | 1 | |
| RST2136 | DRILL PRESS | 1 | |
| RST2137 | DRILL PRESS | 1 | |
| RST2138 | DRILL PRESS | 1 | |
| RST2139 | DRILL PRESS | 1 | |
| RST2140 | DRILL PRESS | 1 | |
| RST2141 | DRILL PRESS | 1 | |
| RST2142 | DRILL PRESS | 1 | |
| RST2144 | DRILL PRESS | 1 | |
| RST2145 | DRILL PRESS | 1 | |
| RST2146 | DRILL PRESS | 2 | |
| RST2147 | DRILL PRESS | 1 | |
| RST2148 | DRILL PRESS | 1 | |
| RST2149 | DRILL PRESS | 1 | |
| RST2150 | DRILL PRESS | 1 | |
| RST2151 | DRILL PRESS | 1 | |
| RST2152 | DRILL PRESS | 2 | |
| RST2153 | DRILL PRESS | 2 | |
| RST2154 | DRILL PRESS | 2 | |
| RST2155 | DRILL PRESS | 1 | |
| RST2156 | DRILL PRESS | 1 | |
| RST2157 | DRILL PRESS | 1 | |
| RST2158 | DRILL PRESS | 1 | |
| RST2159 | DRILL PRESS | 1 | |
| RST2160 | DRILL PRESS | 1 | |
| RST2161 | DRILL PRESS | 1 | |
| RST2162 | DRILL PRESS | 3 | |
| RST2163 | DRILL PRESS | 1 | |
| RST2164 | DRILL PRESS | 1 | |
| RST2165 | DRILL PRESS | 1 | |
| RST2166 | DRILL PRESS | 1 | |
| RST2167 | DRILL PRESS | 2 | |
| RST2168 | DRILL PRESS | 2 | |
| RST2170 | DRILL PRESS | 1 | |
| RST2172 | DRILL PRESS | 1 | |
| RST2173 | DRILL PRESS | 1 | |
| RST2174 | DRILL PRESS | 1 | |
| RST2175 | DRILL PRESS | 1 | |
| RST2181 | DRILL PRESS | 1 | |
| RST2182 | DRILL PRESS | 1 | |
| RST2183 | DRILL PRESS | 1 | |
| RST2184 | DRILL PRESS | 1 | |
| RST2186 | DRILL PRESS | 1 | |
| RST2190 | DRILL PRESS | 1 | |
| RST2192 | DRILL PRESS | 1 | |
| RST2196 | DRILL PRESS | 1 | |
| RST2198 | DRILL PRESS | 1 | |
| RST2199 | DRILL PRESS SWAGING TOOL | 1 | |
| RST2200 | DRILL PRESS SWAGING TOOL | 1 | |
| RST2201 | DRILL PRESS | 1 | |
| RST2204 | DRILL PRESS | 1 | |
| RST2205 | DRILL PRESS | 1 | |
| RST2206 | DRILL PRESS | 1 | |
| RST2209 | DRILL PRESS SWAGING TOOL | 1 | |
| RST2227 | DRILL PRESS | 1 | |
| RST2232 | DRILL PRESS | 1 | |
| RST2237 | DRILL PRESS | 1 | |
| RST2238 | DRILL PRESS | 1 | |
| RST2239 | DRILL PRESS | 1 | |
| RST2240 | DRILL PRESS | 1 | |
| RST2241 | DRILL PRESS | 1 | |
| RST2242 | DRILL PRESS | 1 | |
| RST2243 | DRILL PRESS | 1 | |
| RST2244 | DRILL PRESS | 1 | |
| RST2245 | DRILL PRESS | 1 | |
| RST2246 | DRILL PRESS | 1 | |
| RST2247 | DRILL PRESS | 1 | |
| RST2248 | DRILL PRESS | 1 | |
| RST2249 | DRILL PRESS | 1 | |
| RST2250 | DRILL PRESS | 1 | |
| RST2251 | DRILL PRESS | 1 | |
| RST2252 | DRILL PRESS | 1 | |
| RST2253 | DRILL PRESS | 2 | |
| RST2254 | DRILL PRESS | 1 | |
| RST2255 | DRILL PRESS | 1 | |
| RST2256 | DRILL PRESS | 1 | |
| RST2257 | DRILL PRESS | 1 | |
| RST2258 | DRILL PRESS | 1 | |
| RST2259 | DRILL PRESS | 1 | |
| RST2260 | DRILL PRESS | 1 | |
| RST2261 | DRILL PRESS | 1 | |
| RST2262 | DRILL PRESS | 1 | |
| RST2263 | DRILL PRESS | 1 | |
| RST2264 | DRILL PRESS | 1 | |
| RST2265 | DRILL PRESS | 1 | |
| RST2266 | DRILL PRESS | 1 | |
| RST2267 | DRILL PRESS | 1 | |
| RST2268 | DRILL PRESS | 1 | |
| RST2269 | DRILL PRESS | 1 | |
| RST2270 | DRILL PRESS | 1 | |
| RST2271 | DRILL PRESS | 1 | |
| RST2272 | DRILL PRESS | 1 | |
| RST2273 | DRILL PRESS | 1 | |
| RST2274 | DRILL PRESS | 1 | |
| RST2276 | DRILL PRESS | 1 | |
| RST2277 | DRILL PRESS | 1 | |
| RST2278 | DRILL PRESS | 1 | |
| RST2279 | DRILL PRESS | 1 | |
| RST2280 | DRILL PRESS | 1 | |
| RST2282 | DRILL PRESS | 1 | |
| RST2283 | DRILL PRESS | 1 | |
| RST2284 | DRILL PRESS | 1 | |
| RST2285 | DRILL PRESS | 1 | |
| RST2286 | DRILL PRESS | 1 | |
| RST2287 | DRILL PRESS | 1 | |
| RST2288 | DRILL PRESS | 1 | |
| RST2289 | DRILL PRESS | 1 | |
| RST2290 | DRILL PRESS | 1 | |
| RST2291 | DRILL PRESS | 1 | |
| RST2297 | DRILL PRESS | 1 | |
| RST2299 | DRILL PRESS | 1 | |
| RST2300 | DRILL PRESS | 1 | |
| RST2301 | DRILL PRESS | 1 | |
| RST2302 | DRILL PRESS | 1 | |
| RST2304 | DRILL PRESS | 1 | |
| RST2305 | DRILL PRESS | 1 | |
| RST2308 | DRILL PRESS | 1 | |
| RST2309 | DRILL PRESS | 1 | |
| RST2311 | DRILL PRESS | 2 | |
| RST2316 | DRILL PRESS | 1 | |
| RST2321 | DRILL PRESS | 1 | |
| RST2326 | DRILL PRESS | 1 | |
| RST2330 | DRILL PRESS | 1 | |
| RST2335 | DRILL PRESS | 1 | |
| RST2336 | DRILL PRESS | 1 | |
| RST2339 | DRILL PRESS | 1 | |
| RST2340 | DRILL PRESS | 1 | |
| RST2344 | DRILL PRESS | 1 | |
| RST2345 | DRILL PRESS | 2 | |
| RST2363 | DRILL PRESS | 1 | |
| RST2364 | DRILL PRESS | 2 | |
| RST2365 | DRILL PRESS | 1 | |
| RST2366 | DRILL PRESS | 1 | |
| RST2367 | DRILL PRESS | 1 | |
| RST2368 | DRILL PRESS | 1 | |
| RST2369 | DRILL PRESS | 2 | |
| RST2370 | DRILL PRESS | 1 | |
| RST2371 | DRILL PRESS | 1 | |
| RST2372 | DRILL PRESS | 1 | |
| RST2373 | DRILL PRESS | 1 | |
| RST2374 | DRILL PRESS | 1 | |
| RST2380 | DRILL PRESS | 2 | |
| RST2384 | DRILL PRESS | 2 | |
| RST2387 | DRILL PRESS | 2 | |
| RST2399 | TOOL, STAKING, DRILL PRESS | 1 | |
| RST2403 | TOOL, STAKING, DRILL PRESS | 1 | |
| RST2413 | TOOL, STAKING, DRILL PRESS | 1 | |
| RST2417 | DRILL PRESS | 1 | |
| RST2420 | DRILL PRESS | 2 | |
| RST2424 | DRILL PRESS | 1 | |
| RST2425 | TOOL, SWAGE DRILL PRESS | 2 | |
| RST2428 | DRILL PRESS | 2 | |
| RST2429 | DRILL PRESS | 2 | |
| RST2431 | DRILL PRESS | 2 | |
| RST2432 | DRILL PRESS | 1 | |
| RST2436 | DRILL PRESS | 3 | |
| RST2437 | DRILL PRESS | 1 | |
| RST2440 | DRILL PRESS | 1 | |
| RST2441 | DRILL PRESS | 1 | |
| RST2442 | DRILL PRESS | 2 | |
| RST2443 | DRILL PRESS | 2 | |
| RST2444 | DRILL PRESS | 2 | |
| RST2445 | DRILL PRESS | 1 | |
| RST2446 | DRILL PRESS | 1 | |
| RST2452 | DRILL PRESS | 1 | |
| RST2453 | DRILL PRESS | 2 | |
| RST2454 | DRILL PRESS | 1 | |
| RST2455 | DRILL PRESS | 1 | |
| RST2456 | DRILL PRESS | 1 | |
| RST2459 | DRILL PRESS | 3 | |
| RST2465 | DRILL PRESS | 1 | |
| RST2474 | DRILL PRESS | 1 | |
| RST2481 | TOOL, STAKING, DRILL PRESS | 1 | |
| RST2482 | TOOL, DRILL PRESS SWAGING | 1 | |
| RST2483 | DRILL PRESS | 1 | |
| RST2484 | DRILL PRESS | 1 | |
| RST2485 | DRILL PRESS | 1 | |
| RST2486 | DRILL PRESS | 1 | |
| RST2487 | DRILL PRESS SWAGING TOOL | 1 | |
| RST2500 | DRILL PRESS | 1 | |
| RST2501 | DRILL PRESS | 1 | |
| RST2503 | DRILL PRESS | 1 | |
| RST2512 | Drill Press Bearing Swaging Tool | 2 | |
| RST2513 | DRILL PRESS | 1 | |
| RST2521 | DRILL PRESS | 2 | |
| RST2522 | DRILL PRESS | 2 | |
| RST2523 | Drill Press Bearing Swaging Tool | 1 | |
| RST2525 | DRILL PRESS SWAGING TOOL | 1 | |
| RST2526 | DRILL PRESS | 1 | |
| RST2527 | DRILL PRESS | 2 | |
| RST2528 | DRILL PRESS SWAGING TOOL | 1 | |
| RST2531 | DRILL PRESS | 1 | |
| RST2532 | DRILL PRESS | 1 | |
| RST2533 | DRILL PRESS | 1 | |
| RST2541 | DRILL PRESS | 1 | |
| RST2542 | DRILL PRESS | 1 | |
| RST2543 | DRILL PRESS | 1 | |
| RST2544 | DRILL PRESS | 1 | |
| RST2545 | DRILL PRESS | 1 | |
| RST2546 | DRILL PRESS SWAGING TOOL | 1 | |
| RST2548 | DRILL PRESS SWAGING TOOL | 1 | |
| RST2549 | DRILL PRESS | 1 | |
| RST2550 | DRILL PRESS | 1 | |
| RST2553 | DRILL PRESS | 1 | |
| RST2564 | DRILL PRESS | 1 | |
| RST2566 | DRILL PRESS | 1 | |
| RST2567 | DRILL PRESS | 1 | |
| RST2568 | DRILL PRESS | 1 | |
| RST2571 | DRILL PRESS | 1 | |
| RST2577 | DRILL PRESS | 1 | |
| RST2629 | DRILL PRESS | 1 | |
| RST2630 | DRILL PRESS | 1 | |
| RST2631 | DRILL PRESS | 1 | |
| RST2632 | DRILL PRESS | 1 | |
| RST2633 | DRILL PRESS | 1 | |
| RST2634 | DRILL PRESS | 1 | |
| RST2636 | DRILL PRESS | 1 | |
| RST2637 | DRILL PRESS | 1 | |
| RST2639 | DRILL PRESS | 1 | |
| RST2640 | DRILL PRESS | 1 | |
| RST2645 | DRILL PRESS | 1 | |
| RST2653 | DRILL PRESS | 1 | |
| RST2658 | DRILL PRESS | 1 | |
| RST2664 | DRILL PRESS | 1 | |
| RST2665 | DRILL PRESS | 1 | |
| RST2667 | DRILL PRESS | 1 | |
| RST2668 | DRILL PRESS | 1 | |
| RST2669 | DRILL PRESS | 1 | |
| RST2670 | DRILL PRESS | 1 | |
| RST2671 | DRILL PRESS | 1 | |
| RST2672 | DRILL PRESS | 1 | |
| RST2673 | DRILL PRESS | 1 | |
| RST2674 | DRILL PRESS | 1 | |
| RST2675 | DRILL PRESS | 1 | |
| RST2677 | DRILL PRESS | 1 | |
| RST2678 | DRILL PRESS | 1 | |
| RST2679 | DRILL PRESS | 1 | |
| RST2685 | DRILL PRESS | 1 | |
| RST2687 | TOOL, SWAGING DRILL PRESS | 1 | |
| RST2688 | DRILL PRESS | 1 | |
| RST2689 | DRILL PRESS | 1 | |
| RST2690 | DRILL PRESS | 1 | |
| RST2691 | DRILL PRESS | 1 | |
| RST2692 | DRILL PRESS | 1 | |
| RST2694 | DRILL PRESS | 2 | |
| RST2715 | DRILL PRESS | 1 | |
| RST2716 | DRILL PRESS | 1 | |
| RST2717 | DRILL PRESS | 1 | |
| RST2718 | DRILL PRESS | 1 | |
| RST2719 | DRILL PRESS | 1 | |
| RST2720 | DRILL PRESS | 1 | |
| RST2724 | DRILL PRESS | 1 | |
| RST2727 | DRILL PRESS | 1 | |
| RST2728 | DRILL PRESS | 1 | |
| RST2729 | DRILL PRESS | 1 | |
| RST2731 | DRILL PRESS | 1 | |
| RST2732 | DRILL PRESS | 1 | |
| RST2733 | DRILL PRESS | 1 | |
| RST2734 | DRILL PRESS | 1 | |
| RST2736 | DRILL PRESS | 2 | |
| RST2737 | DRILL PRESS | 1 | |
| RST2738 | DRILL PRESS | 1 | |
| RST2739 | DRILL PRESS | 1 | |
| RST2740 | DRILL PRESS | 1 | |
| RST2741 | DRILL PRESS | 1 | |
| RST2743 | DRILL PRESS | 1 | |
| RST2744 | DRILL PRESS | 1 | |
| RST2745 | DRILL PRESS | 1 | |
| RST2746 | DRILL PRESS | 1 | |
| RST2747 | DRILL PRESS | 1 | |
| RST2748 | TOOL, DRILL PRESS SWAGING | 1 | |
| RST2749 | DRILL PRESS | 1 | |
| RST2750 | DRILL PRESS | 1 | |
| RST2751 | DRILL PRESS | 1 | |
| RST2752 | DRILL PRESS | 1 | |
| RST2760 | DRILL PRESS | 1 | |
| RST2761 | DRILL PRESS | 1 | |
| RST2765 | DRILL PRESS | 1 | |
| RST2766 | DRILL PRESS | 1 | |
| RST2767 | DRILL PRESS | 1 | |
| RST2771 | DRILL PRESS | 1 | |
| RST2773 | DRILL PRESS | 1 | |
| RST2774 | DRILL PRESS | 1 | |
| RST2775 | DRILL PRESS | 1 | |
| RST2776 | DRILL PRESS | 1 | |
| RST2778 | DRILL PRESS | 1 | |
| RST2781 | DRILL PRESS | 2 | |
| RST2782 | DRILL PRESS | 1 | |
| RST2783 | DRILL PRESS | 1 | |
| RST2784 | DRILL PRESS | 1 | |
| RST2785 | DRILL PRESS | 1 | |
| RST2786 | DRILL PRESS | 1 | |
| RST2789 | DRILL PRESS | 1 | |
| RST2792 | DRILL PRESS | 1 | |
| RST2793 | DRILL PRESS | 1 | |
| RST2794 | DRILL PRESS | 1 | |
| RST2801 | DRILL PRESS | 1 | |
| RST2802 | DRILL PRESS | 1 | |
| RST2803 | DRILL PRESS | 1 | |
| RST2804 | DRILL PRESS | 1 | |
| RST2805 | DRILL PRESS | 1 | |
| RST2806 | DRILL PRESS | 1 | |
| RST2808 | DRILL PRESS | 2 | |
| RST2810 | DRILL PRESS | 1 | |
| RST2813 | DRILL PRESS | 1 | |
| RST2814 | DRILL PRESS | 1 | |
| RST2817 | DRILL PRESS | 1 | |
| RST2818 | DRILL PRESS | 1 | |
| RST2821 | DRILL PRESS | 1 | |
| RST2822 | DRILL PRESS | 1 | |
| RST2823 | DRILL PRESS | 1 | |
| RST2825 | DRILL PRESS | 1 | |
| RST2826 | DRILL PRESS | 1 | |
| RST2827 | DRILL PRESS | 1 | |
| RST2829 | DRILL PRESS | 1 | |
| RST2830 | DRILL PRESS | 1 | |
| RST2831 | DRILL PRESS | 1 | |
| RST2832 | DRILL PRESS | 2 | |
| RST2836 | DRILL PRESS | 1 | |
| RST2837 | DRILL PRESS | 1 | |
| RST2839 | DRILL PRESS | 1 | |
| RST2840 | DRILL PRESS | 1 | |
| RST2844 | DRILL PRESS | 1 | |
| RST2845 | DRILL PRESS | 1 | |
| RST2850 | DRILL PRESS | 1 | |
| RST2854 | DRILL PRESS | 3 | |
| RST2855 | DRILL PRESS | 1 | |
| RST2857 | DRILL PRESS | 1 | |
| RST2858 | DRILL PRESS | 1 | |
| RST2866 | DRILL PRESS | 1 | |
| RST2870 | DRILL PRESS | 1 | |
| RST2872 | DRILL PRESS | 1 | |
| RST2874 | DRILL PRESS | 1 | |
| RST2875 | DRILL PRESS | 1 | |
| RST2876 | DRILL PRESS | 1 | |
| RST2877 | DRILL PRESS | 1 | |
| RST2878 | DRILL PRESS | 1 | |
| RST2882 | TOOL, DRILL PRESS | 1 | |
| RST2883 | DRILL PRESS | 2 | |
| RST2902 | DRILL PRESS | 1 | |
| RST2910 | DRILL PRESS | 1 | |
| RST2911 | DRILL PRESS | 1 | |
| RST2912 | DRILL PRESS | 1 | |
| RST2913 | DRILL PRESS | 1 | |
| RST2914 | DRILL PRESS | 1 | |
| RST2915 | DRILL PRESS | 1 | |
| RST2916 | DRILL PRESS | 1 | |
| RST2917 | DRILL PRESS | 1 | |
| RST2919 | DRILL PRESS | 1 | |
| RST2920 | DRILL PRESS | 1 | |
| RST2925 | DRILL PRESS | 1 | |
| RST2926 | DRILL PRESS | 1 | |
| RST2927 | DRILL PRESS | 1 | |
| RST2929 | DRILL PRESS | 1 | |
| RST2931 | DRILL PRESS | 1 | |
| RST2934 | DRILL PRESS | 1 | |
| RST2935 | DRILL PRESS | 1 | |
| RST2936 | DRILL PRESS | 1 | |
| RST2938 | DRILL PRESS | 1 | |
| RST2939 | DRILL PRESS | 2 | |
| RST2940 | DRILL PRESS | 1 | |
| RST2941 | DRILL PRESS | 1 | |
| RST2946 | DRILL PRESS | 1 | |
| RST2948 | DRILL PRESS | 2 | |
| RST2949 | DRILL PRESS | 1 | |
| RST2951 | DRILL PRESS | 1 | |
| RST2952 | DRILL PRESS | 1 | |
| RST2953 | DRILL PRESS | 1 | |
| RST2954 | DRILL PRESS | 1 | |
| RST2961 | DRILL-PRESS TRI ROLLER SWAGING TOOL FOR BEARING M81936/1-22R | 1 | |
| RST2964 | DRILL PRESS | 1 | |
| RST2972 | DRILL PRESS | 1 | |
| RST2977 | DRILL PRESS | 1 | |
| RST2980 | DRILL PRESS | 1 | |
| RST2981 | DRILL PRESS | 1 | |
| RST2990 | DRILL PRESS | 1 | |
| RST2994 | DRILL PRESS | 1 | |
| RST4010 | DRILL PRESS | 1 | |
| RST4023 | DRILL PRESS | 1 | |
| RST4033 | DRILL PRESS | 1 | |
| RST4035 | TOOL, SWAGING DRILL PRESS | 1 | |
| RST4067 | DRILL PRESS | 1 | |
| RST4073 | DRILL PRESS | 1 | |
| RST4093 | DRILL PRESS SWAGING TOOL | 1 | |
| RST4115 | DRILL PRESS | 1 | |
| RST4137 | TOOL, STAKING, DRILL PRESS | 1 | |
| RST4138 | TOOL, STAKING, DRILL PRESS | 1 | |
| RST4160 | TOOL, STAKING, DRILL PRESS | 1 | |
| RST4188 | TOOL, DRILL PRESS SWAGING | 1 | |
| RST4203 | DRILL PRESS | 1 | |
| RST4236 | DRILL PRESS SWAGGING TOOL | 1 | |
| RST4238 | TOOL, DRILL PRESS SWAGING | 1 | |
| RST4241 | TOOL, DRILL PRESS SWAGING | 1 | |
| RST4265 | TOOL, DRILL PRESS SWAGING | 1 | |
| RST4296 | TOOL, DRILL PRESS SWAGING | 1 | |
| RST4316 | TOOL, STAKING, DRILL PRESS | 1 | |
| RST4462 | TOOL, STAKING, DRILL PRESS | 1 | |
| RST4504 | TOOL, DRILL PRESS SWAGING | 1 | |
| RST4534 | DRILL PRESS SWAGER | 1 | |
| RST4606 | TOOL, SWAGING DRILL PRESS | 1 | |
| RST4680 | TOOL, DRILL PRESS | 1 | |
| RST4733 | TOOL, DRILL PRESS | 1 | |
| RST5054 | TOOL, DRILL PRESS SWAGING | 1 | |
| RST5099 | TOOL, STAKING, DRILL PRESS | 1 | |
| RST5100 | TOOL, STAKING, DRILL PRESS | 1 | |
| RST5101 | TOOL, STAKING, DRILL PRESS | 1 | |
| RST5102 | TOOL, STAKING, DRILL PRESS | 1 | |
| RST5112 | TOOL, DRILL PRESS CUTTER | 1 | |
| RST5137 | TOOL, DRILL PRESS | 1 | |
| RST5139 | TOOL, DRILL PRESS | 1 | |
| RT-103-9 | TOOL, DRILL PRESS SWAGIN | 1 | |
| RTWCS1 | COMPRESSION SPRING J Y X - SHA | 1 | |
| RUH8218 | VALVE,REGULATING,FLUID PRESSURE | 1 | |
| RV1H-6T-S316 | PRESSURE RELIEF VALVE, ADJUSTABLE - LOW PRESSURE | 1 | |
| S-2249-2 | CALIBRATED PRESSURE GAUGE (0 - 5 PSI) OR (0 - 10 PSI) | 1 | |
| S-2500-OXYGN | PRESSURE REGULATOR UNIT | 1 | |
| S-976 | TIRE PRESSURE GAUGE | 1 | |
| S0657711 | B717 Cabin Pressure Multifunction Indication tester | 1 | |
| S1 | Press for Crimping Hoses | 4 | |
| S122-1-16 | TRANSMITTER FUEL PRESSURE | 1 | |
| S2-0100-106 | Pressure | 1 | |
| S2-0100-107 | Pressure Piston | 1 | |
| S20-0.1 | PRESSURE REGULATOR | 1 | |
| S2290 | 1IN OIL PRESSURE SENSOR SOCKET | 1 | |
| S2601 | PRESSURE MEASURING INSTRUMENT S2600 | 1 | |
| S3120201 | STAUBLI MALE THREAD SOCKET FOR COMPRESSED AIR | 1 | |
| S332A210-21 | HOSE ASSY PRESSURE | 1 | |
| S3S20041000 | HP COMPRESSOR DUMMY FRONT SHAFT | 1 | |
| S47032 | Compression Tool | 2 | |
| S47263 | END FITTING COMPRESSION TOOL | 1 | |
| S47264 | COMPRESSION TOOL | 1 | |
| S47269 | COMPRESSION AND DECOMPRESSION TOOL | 1 | |
| S48323 | COMPRESSION SCREW | 1 | |
| S48339 | COMPRESSION SCREW | 1 | |
| S48432 | COMPRESSION TOOL | 3 | |
| S500-213001-TFIX03-0001 | Pressuziration Blanking Kit | 1 | |
| S6221 | NAVISTAR HIGH PRESSURE RAILSKT | 1 | |
| S7102 | 30MM TQADPT FUELPRESS REG 6.7L | 1 | |
| S7400 | OIL PRESSURE SWITCH SOCKET | 1 | |
| S902487-F100 | Face Seal Press Fit Jig | 1 | |
| S905487-F100 | Face Seal Press Fit Jig | 1 | |
| SA0010066 | PRESSING-IN SLEEVE SMALL BEARING | 1 | |
| SA010034 | PRESSING-IN SLEEVE LARGE BEARING | 1 | |
| SA010166 | PRESSING-IN SLEEVE | 1 | |
| SA010214 | PRESSING-IN SLEEVE | 1 | |
| SA010215 | PRESSING-IN SLEEVE | 1 | |
| SA010424 | Pressing-in sleeve for the Large bearing | 1 | |
| SA010425 | Pressing-in sleeve for the small bearing | 1 | |
| SA010498 | PRESSING IN TOOL | 1 | |
| SA010569 | BEARING PRESSING IN SLEEVE | 1 | |
| SA010571 | BEARING PRESSING IN SLEEVE | 1 | |
| SA479BU-2581-AQ | PRESSURE GAUGE | 1 | |
| SA7670024-009 | HOSE PRESSURE | 1 | |
| SAG18920 | TERMINAL PRESSING PLIERS - SNAP ON | 1 | |
| SAM20146 | DRIVE BLOCK PRESSING-IN TOOL | 1 | |
| SAM20272 | Pressing-in sleeve | 1 | |
| SAO10166 | PRESSING-IN SLEEVE SMALL BEARING | 1 | |
| SASK1806 | REGULATOR - HI- PRESSURE W/2 GAUGES | 1 | |
| SASK1926 | OXYGEN PRESSURE CONTROL PANEL | 1 | |
| SB737-57A1271 | PRESSURE PLATE SET | 1 | |
| SBA330-38-3029 | 10MD PRESSURE SWITCH SIM TEST TOOL | 1 | |
| SBE1882 | ADAPTER - PRESS PORT | 1 | |
| SBE2219 | PRESSURE PORT | 1 | |
| SBE2221 | CABIN PRESSURIZATION SAFETY VALVE - TEST KIT | 1 | |
| SC-37D | PRESSURE SENSOR | 1 | |
| SC000120/R | COLTRI MCH 6/EM BREATHING AIR COMPRESSOR 230V 50HZ | 1 | |
| SC100132-ICON LSE 100 ET | COMPRESSOR AR RESPIRAVEL ICON LSE 100 ET PORTATIL MCH6/ET 230V 60HZ 3KW COLTRI | 1 | |
| SC14052G04 | FIXTURE, LIFT AND TURN - LOW PRESSURE TURBINE - HORIZONTAL | 1 | |
| SCA-200HYD | HYDRAULIC SERVICE CART - PRESSURES OF 0-3000 PSI FILTERED TO 15 MICRONS ABSOLUTE | 1 | |
| SCA-3000-DSG | GAUGE - PRESSURE, 0-3000 PSIG (0-20685 KPA) | 2 | |
| SCA-DGT- VG8-12 | DIGITAL TIRE PRESSURE GAUGE | 1 | |
| SCA-DGT-VG8 | PRESSURE GAUGE 0-20 | 1 | |
| SCA-DGT-VG8-12 | TIRE PRESSURE GAUGE | 1 | |
| SCA-DGT-VG8-12D | TIRE PRESSURE G | 1 | |
| SCA-N2-KIT-BS341 | KIT, PRESSURE REGULATOR | 1 | |
| SCA-VG8-12 | TIRE PRESSURE GAUGE | 1 | |
| SCA-VG8-12D | TIRE PRESSURE GAUGE DIGITAL | 1 | |
| SCA-VGB-12D | DIGITAL TIRE PRESSURE GAUGE KIT | 1 | |
| SCA1M-VG8-12 | TIRE PRESSURE GAUGE | 1 | |
| SCA1M-VG8-12D | TYRE INFLATION PRESS GAUGE | 1 | |
| SCAHP10M-6116 | FILLING EQUIPMENT - NITROGEN, PRESSURE REGULATED GAGE | 1 | |
| SCAHP10M-6116CGA580 | FILLING EQUIPMENT - NITROGEN, PRESSURE REGULATED GAGE | 1 | |
| SCALP10M | FILLING EQUIPMENT - NITROGEN, PRESSURE REGULATED GAGE | 1 | |
| SCALP10M-6116 | FILLING EQUIPMENT - NITROGEN, PRESSURE REGULATED GAGE | 1 | |
| SCAM-VG8-12D | TYRE INFLATION PRESS GAUGE | 1 | |
| SCF2-8189 | FIXTURE-COMPRESSION,SPRING | 1 | |
| SCHRADER 2755 | SCHRADER 2755 HIGH PRESSURE STRUT COUPLER - 3/8"-24 THREAD FOR 3/16" FITTING | 1 | |
| SCHRADER 556 | HIGH PRESSURE STRUT COUPLER | 2 | |
| SCJN-KIT-400 | TEST KIT,PRESSURE;|FOAM LINED CARRYING CASE CONTAINING PRESSURE GAUGE 0-400 BAR DIGITAL READOUT,ADAPTOR M16 X 2.0 MALE TO M16 X 2.0 MALE,ADAPTOR 1/4 IN BSPP FEMALE TO M16 X 2.0 FEMALE,FLEXIBLE HOSE 1.5 METRES LONG M16 X 2.0 FEMALE CONNECTOR | 1 | |
| SD0812 | HYDRO PRESS 75 TONS | 1 | |
| SD700 | BAROMETRIC PRESSURE/TEMP/HUM DATALOG | 2 | |
| SE 72-6001 | Engine Oil Press Relief Vivadj Tool | 5 | |
| SE-1 | PRESSURE SWITCH | 1 | |
| SE-SO-30-DT-A | PRESSURE SENSOR | 1 | |
| SE72-6001 | Adjusting Tool Assembly -Relief Valve. Oil Pressure | 5 | |
| SE78-3010 | COMPRESSOR -0 TR LOCK ACTUATOR RING TO COMPRESS | 1 | |
| SE8788 | TOOL KIT PRESSURE STRUCTURAL REPAIR | 1 | |
| SEB52210000 | PRESSURE TEST ADAPTER | 1 | |
| SEN000035ST | PRESSURE GAUGE 0-35 PSI | 1 | |
| SEN000100ST | PRESSURE GAUGE 0-100 PSI | 1 | |
| SEN000300ST | PRESSURE GAUGE 0-300 PSI | 1 | |
| SEN003500ST | PRESSURE GAUGE 0-3500 PSI | 1 | |
| SEPW1000 | PRESSURE WASHER DISC. | 1 | |
| SEPW1450SHDE-A | 14SHDE-A 120V PRESSURE WASHER | 1 | |
| SEPW1500P | HAND CARRY ELECTRIC PRESSURE WASHER | 1 | |
| SEPW1600G | PRESSURTE WHASERS | 1 | |
| SEPW2700G | PRESSURE WASHER | 1 | |
| SEPW3000HQ | PRESSURE WASHER | 1 | |
| SEPW3000QH | 3000PSI GAS PRESSURE WASHER | 1 | |
| SETRA 370 | Digital Pressure Indicator | 1 | |
| SEY11000A | MOBILE HYDRIC PRESS W HND PMP | 1 | |
| SEY11100-06 | PRESS ADAPTER | 1 | |
| SEYSP13-1 | HYDRAULIC PRESS PACK | 1 | |
| SEYSP13-2 | HYDRAULIC PRESS PACK 2 | 1 | |
| SF-014H03E-TU/O/V/2 | 600 PSIG WROKING PRESSURE | 1 | |
| SF5327-1 | PRESSURE TOOL | 1 | |
| SG 29-TP1PT35A | DZUS LOCKS PRESSING TOOL | 1 | |
| SG 3095 | MOBILE COMPRESSOR | 1 | |
| SG 8816540000 | ARRIEL OIL PRESSURE TAPPING TUBE MODULE | 1 | |
| SG/777/C200 | COMPRESSOR WATER WASH CART | 1 | |
| SG14200P2 | WING OF PRESSURE TEST SET | 1 | |
| SGI4200P2 | WING OF PRESSURE TEST SET | 1 | |
| SGP27438 | 2755 HIGH PRESSURE STRUT COUPLER | 1 | |
| SGP95720 | AIRCRAFT ENGINE DIFFRENTIAL CYLINDER PRESSURE TESTER WITH MASTER ORIFICE | 1 | |
| SH001 | BOTTLE - NITROGEN CART - SERVICING, STRUT OIL INFLATOR - STRUT, LANDING GEAR GAUGE - PRESSURE, 0-3000 PSIG (0-20685 KPA) WRENCH - TORQUE BUCKET - 2.5 GALLON CAPACITY | 3 | |
| SIC260-3500-SP | STRUT ACCUMULATOR PRESSURE GAUGE 260PSI | 1 | |
| SIC260/3500-SP | STRUT ACCUMULATOR PRESSURE GAUGE 260PSI | 1 | |
| SIC2755 | HI PRESSURE STRUT ADAPTER (SPARE) | 1 | |
| SIC3500 | GAGE, HIGH PRESSURE | 1 | |
| SIC3500-001 | GAGE, LANDING GEAR STRUT SERVICING, HIGH PRESSURE | 8 | |
| SIC800-001 | LOW PRESSURE STRUT SERVICE TOOL 0-800 PSI | 1 | |
| SIC8921-A | HIGH PRESSURE STRUT SERVICE & INFLATION ADAPTER | 3 | |
| SIC8921A | HIGHT PRESSURE STRUD SERVICE ADAPTER | 3 | |
| SIKPM350E2 | DIGITAL PRESSURE GAUGE | 1 | |
| SIKPM40E2 | DIGITAL PRESSURE GAUGE | 1 | |
| SIMPSON 890-2 | SOUND PRESSURE LEVEL CLIBRATOR | 1 | |
| SIRST9020 | BRAKE PAD COMPRESSOR | 1 | |
| SITRANS P | DIFFERENTIAL PRESSURE GAGE (2.4 TO 240 INH2O (0.0867 TO 8.67 PSIG (0.597 TO 59.78 KPA)), ACCURACY: ±1% OF FULL SCALE) SIEMENS, SITRANS P, SERIES DSIII, TRANSMITTER MODEL 7MF4432-1EA22-1AC7-7 | 1 | |
| SK-1100-1 | PRESSURE DROP TUBE, OIL IN PORT | 1 | |
| SK-1100-2 | PRESSURE DROP TUBE, OIL OUT PORT | 1 | |
| SK-2043-5 | High Pressure Hose Couplings (Proof pressure: -) (Style: Replacement Seal) (Working pressure: -) (Add to cart: Add To Cart) | 1 | |
| SK-2043-C | High Pressure Hose Couplings (Proof pressure: -) (Style: Replacement Seal) (Working pressure: -) (Add to cart: Add To Cart) (Proof pressure: 10,000 psi) (Style: Gooseneck) (Working pressure: 5,000 psi) (Add to cart: Add To Cart) | 11 | |
| SK-2043-S | Dill Air Controls SK-2043-S Copper 18 NPT Female - 5,000 PSI Straight High-Pressure Hose Coupling | 2 | |
| SK-2043C | Dill Air Controls SK-2043-C Copper 18 NPT Female - 5,000 PSI Gooseneck High-Pressure Hose Coupling | 11 | |
| SK13389 | MACHINING FIXTURE SHROUD COMPRESSOR APU | 1 | |
| SK17871 | COMPRESSION TOOL | 1 | |
| SK2043C | HI-PRESSURE HOSE COUPLINGS GOOSENECK 70 DEG. ANGLE | 11 | |
| SKB5576 | PRESSURE TEST ADAPTOR | 1 | |
| SKB5588 | PRESSURE TEST ADAPTOR | 1 | |
| SKSP1404-1 | Compression Tool | 1 | |
| SKU 2000947 | 1-BOTTLE NITROGEN LOW/HIGH PRESSURE REGULATOR SYSTEM | 1 | |
| SKU-312-800-B | GAUGE, PRESSURE, 100 PSI, 700 KPA, DUAL SCALE | 1 | |
| SKU-68223 | CENTRAL PNEUMATIC 150 PSI AIR COMPRESSOR REGULATOR KIT WITH DIAL GAUGE | 1 | |
| SKU2001405 | TIRE SERVICE GUAGE /INFLATOR PRESSURE NITROGEN 300 PSI | 1 | |
| SL-600B | PRESSURIZATION TEST UNIT | 1 | |
| SL-600C | PRESSURIZATION TEST UNIT | 2 | |
| SL-6136-4HL | PRESSURE GAUGE | 1 | |
| SM-07 | PRESSURE GAUGE DIGITAL 3600 PSI / 250 BAR 63mm | 1 | |
| SM198 | PRESSURE GAUGE | 2 | |
| SM297 | HIGH PRESSURE CHARGING VALVE | 2 | |
| SM457 | GAUGE PRESSURE | 1 | |
| SM705 | DECOMPRESSOR FROM JMP/CFM56/D/4777/C200 ENGINE CLEANOUT TOOL | 1 | |
| SM709 | GAUGE PRESSURE | 1 | |
| SMM63BG1 | PRESSURE GAUGE | 1 | |
| SMT-A-IPR-KIT-MS14101-9 | THIS IS AN ARBOR PRESS INSTALLATION, PROOF-LOAD, REMOVAL TOOL FOR BEARING MS14101-9 | 1 | |
| SMT-RST-.970-312 | HIS IS A DRILL PRESS TRI-ROLLER SWAGING TOOL FOR BEARING MS14101-9 | 1 | |
| SN-702A | Pressure Gauge | 1 | |
| SOLFRUNT 1403 | PRESSURE GAUGE 0-15 PSI (CFT FUEL TANK TEST RIG) | 1 | |
| SOLFRUNT1403 | SOLFRUNT MODEL 1403 PRESSURE GAUGE 0-15 PSI | 1 | |
| SOLVENT WATER PRESSURE CLEANER | SOLVENT WATER PRESSURE CLEANER | 1 | |
| SP506442 | COMPRESSION FITTING | 1 | |
| SP68731 | COMPRESSION FITTING | 1 | |
| SPC-101 | PROTECTOR – STATIC PRESSURE SENSOR | 6 | |
| SPC101 | STTIC PRESSURE SENSOR | 6 | |
| SPC−101 | Protector − Static Pressure Sensor | 6 | |
| SPDTU30A | COMPRESSION TEST SET | 1 | |
| SPDTU322 | DIESEL FUEL PRESS.TEST KIT | 1 | |
| SPDTU3220 | FUEL PRESSR TEST GAGE COMPUCHK | 1 | |
| SPDTU3225 | DIESL FUEL PRESS ADPTR/COMPUCH | 1 | |
| SPDTU73110 | COMPRESSION EXTENSION | 1 | |
| SPG-63-0300P | 0-300 BAR PRESSURE GAUGE | 1 | |
| SPG-DIGI B0400-B | STAUFF PRESS GAUGE KIT | 1 | |
| SPG100ATPG-400-C1AB | AIRCRAFT TYRE PRESSURE GAUGE | 1 | |
| SPL-11837 | Compression Cap Ring Tool | 1 | |
| SPL-12301 | DIGITAL TIRE PRESSURE GAUGE | 1 | |
| SPL-14801 | ADAPTER SET, MANIFOLD PRESSURE CHECK | 1 | |
| SPL-14896 | ALIGNMENT EQUIPMENT - FIRE SUPPRESSION BOTTLE NOZZ | 1 | |
| SPL-1651 | PLATFORM - MAINTENANCE, FIRE EXT BOTTLE & IVE PRESS VLV | 1 | |
| SPL-1728 | EQUIPMENT - HANDLING, STABILIZER JACKSCREW (DOME PRESSURE BULKHEAD) | 1 | |
| SPL-1746 | LE CRUISE DEPRESSURIZATION VALVE LOCKOUT | 1 | |
| SPL-1774 | FIXTURE, BRAKE PEDAL, PRESSURE | 1 | |
| SPL-1777 | PRESSURE PLUG EQUIPMENT - FUEL SYSTEM | 1 | |
| SPL-18641 | DRIVE SOCKET - TRAS, MANUAL DRIVE (FULLY DEPRESSED | 1 | |
| SPL-193 | EQUIPMENT - TEST, PRESSURE LEAK, CREW OXYGEN SYSTEM | 1 | |
| SPL-1934 | EQUIPMENT - TEST, PRESSURE LEAK, CREW OXYGEN SYSTEM | 1 | |
| SPL-1948 | EQUIPMENT - PRESSURIZATION, WASTE DRAIN SYSTEM | 1 | |
| SPL-19643 | LEVER COMPRESSION/EXTENSION EQUIPMENT | 1 | |
| SPL-6692 | VACUMM TANK – PRESSURE RELEIF VALVE TESTER | 1 | |
| SPL-6874 | GAGE - PRESSURE, DIFFERENTIAL | 1 | |
| SPL-7319 | EQUIPMENT - TEST, DECOMPRESSION | 1 | |
| SPL-7455 | TEST EQUIPMENT - LEAK AND PRESSURE | 1 | |
| SPL-8420 | PRESS RELIEF VALVE - CHECK FIXTURE | 1 | |
| SPL-8907 | IMMOBILISER - LOW PRESSURE COMPRESSOR | 1 | |
| SPM1010/ | PRESSING TOOL BELVAL | 1 | |
| SPO-562 | ULTRASONIC COMPRESSIONAL PROBES M-10MHZ 5MHZ NORTEC | 1 | |
| SPRAYER 5L | 5L PRESSURE SPRAYER | 1 | |
| SPRING1/4X1 | COMPRESSION SPRING 1/4 X 1 | 1 | |
| SPT-DAC1-03 | FUEL PRESSURE TESTER | 1 | |
| SR15485 | PRESS GAUGE | 1 | |
| SR4F-540 | VICTOR OXYGEN HIGH PRESSURE STYLE REGULATOR | 1 | |
| SR4J | HIGH PRESSURE REGULATOR | 2 | |
| SR4K-680 | PRESSURE REGULATOR HP | 2 | |
| SRJ4 26-1612-24-453 | PRESSURE REGULATOR | 1 | |
| SRJA-OXIGENIO | VALVULA REGULADORA ALTA PRESS?O DE OXIGENIO, SR4J (3000 PSI), ENCAIXE DE 1/4 , TUBO INOXIDAVEL | 1 | |
| SRP-1003 | READOUT, RAT PRESS. (CAL.) | 2 | |
| SRT20798 | ATITUDE PRESSURE SWITCH ADAPTER | 1 | |
| SS1012-7 | PRESSURE SWITCH | 1 | |
| SS143412 | AIR COMPRESSOR BANNER | 1 | |
| SSI-MGA-30-A-9V-R | DIGI PRESSURE GAUGE 0-30PSI | 1 | |
| SSI-MGA-300B63:Q64-A-9V-R | DIGI PRESSURE GAUGE 0-300PSI | 1 | |
| SSO0667214 | PULLERS FOR DISMANTLING-MOUNTING OF MR1-3 COMPRESSOR BEARINGS | 1 | |
| SSTMD36BC3 | PRESSURE SENSOR TOOL | 1 | |
| ST-107R | XMTR-HYD PRESS | 1 | |
| ST-215 | DRIVER, SLEEVE, OIL PRESSURE RELIEF VALVE ADQUIRIR | 1 | |
| ST-25 | LYCOMING Engines ST-25 Valve Spring and Bar Compressor | 2 | |
| ST-485 | COMPRESSOR PISTON | 1 | |
| ST-508-080 | PM ARBOR PRESS FIXTURE | 1 | |
| ST-508-080 PM | ARBOR PRESS FIXTURE | 1 | |
| ST-508-080PM | ARBOR PRESS FIXTURE | 1 | |
| ST-71; ST-71-8 | PRESSURE PLATE (PRESSURE PLATE) 1/2 " | 1 | |
| ST-92 | ARBOR PRESS | 1 | |
| ST-9F | TRANSMITTER, PRESSURE AIR | 1 | |
| ST0024205 | TOOL RIM DEPRESSOR | 1 | |
| ST1060-20 | Standard Tool - Decompression Fork | 1 | |
| ST1060-20-1 | DECOMPRESSION FORK PANEL REMOVAL | 1 | |
| ST1718-17 | PRESSURE PLATE | 1 | |
| ST1860P | HIGH PRESSURE WASHING MACHINE | 2 | |
| ST2170 | F100 PULLER PRESS NG SLID | 1 | |
| ST2575C | STANDARD TOOL - FENWAL CONNECTORS, SLEEVE AND PIN PRESS TOOL, BAC5162-64 | 2 | |
| ST2575C-1 | Press Tool Assy | 3 | |
| ST2580-343AB-7 | CROW FOOT – COMPRESSION NUT | 1 | |
| ST3086-139 | PACKING ( LP COMPRESSOR TIE ROD) | 1 | |
| ST321-A | SUPPORT - BUSHING INSTALLATION, ARBOR PRESS | 1 | |
| ST56575S0000 | PRESS IN PRESS OUT TOOL | 1 | |
| ST71212 | Fixture Arbor Press | 2 | |
| ST7483 | WASHER PRESS TOOL | 1 | |
| ST7484 | SPINDLE GEAR PRESS TOOL (2 IT) | 1 | |
| ST7M362-1 | PRESSUR GAUGE (0 TO 5000) PSI 1/4" INPUT | 1 | |
| ST7M362-2 | PRESSUR GAUGE (0 TO 160) PSI 1/4 " INPUT | 1 | |
| ST7M392-1 | PRESSURE GAUGE 100 PSI | 1 | |
| ST863-PB | PLUG -0 MS33660 BEAD PRESSURE TEST DUCT ASSY | 1 | |
| ST869C-9-18 | Plug pressure test | 1 | |
| ST869EA-400 | PRESSURE TEST TOOL | 1 | |
| ST869EA-450 | PRESSURE TEST TOOL | 1 | |
| ST869EA-600 | PRESSURE TEST TOOL | 1 | |
| ST869EG-400 | Pressure test assy bacf22bd flanges | 1 | |
| ST869EG-500 | Pressure test assy bacf22bd flanges | 1 | |
| ST869EG-700 | Pressure test assy bacf22bd flanges | 1 | |
| ST869FB-400-F | Pressure test tool medium duty flange | 1 | |
| ST869FB-400-M | Pressure test tool medium duty flange | 1 | |
| ST869FC-550-F | PRESSURE TEST TOOL | 1 | |
| ST918A | Mandrel - Bearing Pressing | 4 | |
| ST918A-1000-1600 | MANDREL BEARING PRESSING | 1 | |
| ST918A-1000-1600-M | MANDREL BEARING PRESS | 1 | |
| ST918A-1000-1750 | MANDREL BEARING PRESSING | 4 | |
| ST918A-1000-1875 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-1000-1912 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-1000-1937 | MANDREL BEARING PRESSING | 1 | |
| ST918A-1000-1937-M | MANDREL BEARING PRESS | 1 | |
| ST918A-1000-2250 | MANDREL-BEARING PRESSING | 1 | |
| ST918A-1000-2500 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-1180-2064 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-1250-2360 | MANDREL BEARING PRESSING | 2 | |
| ST918A-1250-2360-M | MANDREL BEARING PRESS | 1 | |
| ST918A-1250-2375 | MANDREL BEARING PRESSING | 1 | |
| ST918A-1312-1750 | MANDREL BEARING PRESSING | 1 | |
| ST918A-1375-2250 | Standard Tool - Mandrel, Bearing Pressing | 1 | |
| ST918A-1375-2562 | MANDREL-BEARING PRESSING | 1 | |
| ST918A-1375-2572 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1375-2582 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1375-2856 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1375-3500 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1378-2440 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1500-2812 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1500-3125 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1563-2312 | BEARING PRESSING MANDREL | 1 | |
| ST918A-1625-2964 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1750-3339 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1771-2952 | Standard tool mandrel-bearing-pressing bacb10a | 4 | |
| ST918A-1813-2562 | MANDREL BEARING PRESSING | 1 | |
| ST918A-190-625 | MANDREL BEARING PRESSING | 1 | |
| ST918A-190-625-M | MANDREL BEARING PRESS | 1 | |
| ST918A-190-777 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-2125-3592 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-250-605 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-250-625 | Standard tool mandrel-bearing-pressing bacb10a | 4 | |
| ST918A-250-656 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-250-687 | Standard tool mandrel-bearing-pressing bacb10a | 3 | |
| ST918A-250-689 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-250-750 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-250-901 | Standard tool mandrel-bearing-pressing bacb10a | 4 | |
| ST918A-2500-3937 | MANDREL -0 BEARING -0 PRESSING | 1 | |
| ST918A-260-687 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-260-688 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-260-689 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-260-750 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-3-437-906 | PRESS MANDREL | 1 | |
| ST918A-3000-5000 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-312-1250 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-312-687 | MANDREL-BEARING PRESSING | 4 | |
| ST918A-312-750 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-312-781 | Standard tool mandrel-bearing-pressing bacb10a | 3 | |
| ST918A-312-783 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-312-812 | Press mandrel | 1 | |
| ST918A-315-656 | MANDREL-BEARING PRESSING | 1 | |
| ST918A-375-1500 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-375-500 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-375-812 | MANDREL BEARING PRESSING | 1 | |
| ST918A-375-875 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-375-876 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-375-906 | MANDREL BEARING PRESSING | 1 | |
| ST918A-375-906-M | MANDREL BEARING PRESS | 1 | |
| ST918A-437-906 | Standard tool mandrel-bearing-pressing bacb10a | 3 | |
| ST918A-500-1000 | MANDREL, BEARING PRESSING | 4 | |
| ST918A-500-1065 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-500-1094 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-500-1095 | STANDARD TOOL MANDREL, BEARING, PRESSING BACB10A | 1 | |
| ST918A-500-1687 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-500-1750 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-562-1187 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-562-1188 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-625-1125 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-625-1187 | MANDREL-BEARING PRESSING | 1 | |
| ST918A-625-1687 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-750-1187 | Mandrel - Bearing Pressing | 1 | |
| ST918A-750-1437 | Standard tool mandrel-bearing-pressing bacb10a | 3 | |
| ST918A-750-1625 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-750-1750 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-750-1937 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-772-1065 | BEARING PRESSING MANDREL | 1 | |
| ST918A250-687 | MANDREL, BALL BEARING PRESSING | 3 | |
| ST918A500-1000 | Mandrel - Bearing Pressing BACB10A | 4 | |
| ST918A750-1930 | MANDREL BEARNG PRESS TOOL | 1 | |
| ST918B | Mandrel - Bearing Pressing | 1 | |
| ST918B-1-750-1000 | Mandrel - Bearing Pressing | 1 | |
| ST918B-3-500-1687 | Standard tool mandrel bearing pressing BACB10B | 1 | |
| ST918B-4-375-875 | MANDREL BEARING PRESSING | 1 | |
| ST918C | Mandrel - Bearing Pressing | 1 | |
| ST918C-1375-2812 | Mandrel, Bearing Pressing | 1 | |
| ST918C-250-901 | Standard tool mandrel-bearing pressing bacb10c | 1 | |
| ST918C-312-1250 | Standard tool mandrel-bearing pressing bacb10c | 1 | |
| ST918C-375-1437 | MANDREL ROLLER BEARING PRESSING | 2 | |
| ST918C-500-1625 | Standard tool mandrel-bearing pressing bacb10c | 1 | |
| ST918C-625-1125 | MANDREL BEARING PRESSING | 1 | |
| ST918C-625-1375 | Standard tool mandrel-bearing pressing bacb10c | 1 | |
| ST918C-625-1937 | Standard tool mandrel-bearing pressing bacb10c | 1 | |
| ST918C-625-2375 | MANDREL BEARING PRESSING | 1 | |
| ST918C-875-1812 | MANDREL, BEARING PRESSING | 1 | |
| ST918D | Mandrel - Bearing Pressing | 1 | |
| ST918D-750-1250-620 | Mandrel - Bearing Pressing | 1 | |
| ST918D–750-1250-620 | MANDRELS- BEARING-PRESSING BACB10D | 1 | |
| ST919-812 | Press mandrel | 1 | |
| ST920 | MANDREL - NAS PRESS FIT BUSHING INSTALLATION TOOL | 1 | |
| ST920B | INSTALLATION TOOL - PRESS BUSHING | 1 | |
| ST930B | STAKING TOOL - PRESSURE | 1 | |
| ST931D-250-625 | Punch, Press, Ball Stake | 1 | |
| ST93227 | Fixture, Pressure Test | 1 | |
| STAB-PX-CHECK-GAUGE | B767 STAB PRESS.GAUGE & HOSE TOOL | 1 | |
| STD-0341 | COMPRESS AIR SUPPORT EQUIPMENT | 1 | |
| STD-1057 | AIR SOURCE-REGULATED DRY FILTERED, COMPRESSED 60-105 PSIG | 1 | |
| STD-1084 | GAUGE - PRESSURE, 0-10 PSIG (0-69 KPA) | 1 | |
| STD-1091 | PRESSURE GAUGE TOOLING | 1 | |
| STD-1114 | AIR SOURCE - REGULATED, DRY, FILTERED 0-150 PSIG WITH PRESSURE GAUGE RANGE 0-100 PSIG, 1 PSIG INCREMENT, AND /-1 PSI MINIMUM ACCURACY (STD-1114) | 1 | |
| STD-1121 | COMPRESSOR - AIR, PORTABLE, EXPLOSION PROOF | 1 | |
| STD-1132 | GAUGE TIRE PRESSURE | 1 | |
| STD-1148 | GAUGE - PRESSURE, DRY CASE, 0-150 PSIG 0.5% OF FULL SCALE ACCURACY, | 1 | |
| STD-1149 | GAUGE - PRESSURE,DRY CASE, 0-2000 PSIG 1.0% OF FULL SCALE ACCURACY, | 1 | |
| STD-1157 | PRESSURE GAUGE | 1 | |
| STD-11739 | GAGE - PRESSURE - 0-50 PSIG +/- 1 ACCURACY WITH HOSE AND FITTINGS | 1 | |
| STD-11844 | PRESSURE GAUGE - CLAMP-ON, HYDRAULIC, 3500 PSI | 1 | |
| STD-1201 | GAUGE-PRESSURE 0-75 PSG | 1 | |
| STD-12129 | PRESSURE REGULATOR - ADJUSTABLE | 1 | |
| STD-1286 | EQUIPMENT - PRESSURE WASHER, ELECTRIC OR DIESEL DR | 1 | |
| STD-1287 | HOSE - PRESSURE WASHER, 3/8 INCH I.D. 50 TO 150 FO | 1 | |
| STD-1292 | GAUGE - PRESSURE, 0-200 PSIG (0-1379 KPA) | 1 | |
| STD-1325 | SOURCE - PRESSURE, CAPABLE OF SUPPLYING 35 /- 5 PSIG | 1 | |
| STD-13745 | GAUGE - PRESSURE 0-30 PSIG /- 5% ACCURACY | 1 | |
| STD-13775 | REGULATOR PRESSURE 0-100PSI (0-690) | 1 | |
| STD-13877 | INDUSTRIAL VACUUM CLEANER - HIGH SUCTION PRESSURE AND AIRFLOWEQUIVALENT, EXPLOSION AND ANTI-STATIC PROOF, WITH CREVICE ATTACHMENTS | 2 | |
| STD-1453 | GAUGE - PRESSURE, 0-250 PSIG (0-1724 KPA) | 1 | |
| STD-1454 | REGULATOR - PRESSURE 0-250PSIG WITH PRESSURE GAUGE 3/8 INCH ID | 1 | |
| STD-162 | CART-OIL, PRESSURISED 50PSI ( | 1 | |
| STD-2101 | GUAGE PRESSURE 0-75 PSIG | 1 | |
| STD-375 | GAUGE - HYDRAULIC PRESSURE, 0 TO 4500 PSI (0 TO 31026 KPA) | 1 | |
| STD-4051 | DISPENSER - PRESSURIZED OIL SOURCE | 1 | |
| STD-5484 | HYDRAULIC SERVICE CART - PRESSURES OF 0-3000 PSI FILTERED TO 15 MICRONS ABSOLUTE | 1 | |
| STD-6494 | PRESSURE GAUGE (0 TO 25 PSI0 TO 175 KPA) WITH 1 ACCURACY | 1 | |
| STD-6660 | VALE CONTROL (PRESSURE RATING 150 PSIG MIN, 3/8) | 1 | |
| STD-6874 | GAGE - PRESSURE, DIFFERENTIAL | 1 | |
| STD-6883 | PRESSURE TAPE | 1 | |
| STD-756 | SCALE - SPRING, 0 TO 100 LBS. (0 TO 45.36 KG), COMPRESSION | 1 | |
| STD1850.247-004 | FIXTURE ARBOR PRESS, AVIM | 1 | |
| STDTOOL-30 | DRY AIR COMPRESSOR | 1 | |
| STI3045 | TIRE PRESSURE AIR LINE GAUGE(MK3) | 1 | |
| STNC 0-1MPA | PRESSURE GAUGE | 1 | |
| STYLE15 | PRESSURE SPRAYER BOTTLE 1.5L | 1 | |
| SV-5YJ-G01 | HYDRAULIC PRESS MACHINE ( PRESS VALUE 5 TON ) | 1 | |
| SVL-220-S | SPRING COMPRESSION TESTER TOOL | 1 | |
| SVTS2000 | COOLANT BARRIER PRESSURE TESTR | 1 | |
| SVTS263-2 | PRESSURE GAGE WITH BOOT | 1 | |
| SVTS263A | COOL SYS PRESS TEST-AIR POWRED | 1 | |
| SVTS264 | COOL SYS PRESS TEST AIR-POWER | 1 | |
| SVTS272A | COOLING SYSTEM PRESSURE TESTER | 1 | |
| SWE-18991DTT | KIT - ELECTRONIC CONTROL WITH DRIVE UNIT, COMPRESS | 2 | |
| SWE189DTT | KIT - ELECTRONIC CONTROL WITH DRIVE UNIT, COMPRESSOR TURNING | 2 | |
| SWP240V10A95-120PSI | PRESSURE SWITCH ON90PSI OFF125PSI | 1 | |
| SZEA7030 | COMPRESSION RIVETER | 1 | |
| SZEA8015 | COMPRESSION RIVITER | 1 | |
| SZEA9000 | BRAKE RIVETING MACHINE(COMPRESSION REVETER) | 1 | |
| SZEA9015 | COMPRESSION RIVETER | 2 | |
| SZEA9030 | COMPRESSION RIVERTER | 1 | |
| Silverwing RMS2 300 - Scanning Head | Silverwing RMS2 300 - Scanning Head - 300 mm scanning bridge, Design for inspecting areas with limited access, Storage tank shells, horizontal storage tanks, pressure vessels, spheres, ship hulls, large structures | 1 | |
| Silverwing RMS2 450 - Scanning Head | Silverwing RMS2 450 - Scanning Head - 450 mm scanning bridge, Designed for inspecting circumferentially on curved surfaces, Pipelines, pressure vessels, horizontal tanks | 1 | |
| Silverwing RMS2 600 - Scanning Head | Silverwing RMS2 600 - Scanning Head - 600 mm scanning bridge, Designed for large surface area, Storage tank shells, horizontal tanks, pressure vessels, spheres, ship hulls, large structures | 1 | |
| T 25758 | Fixture, Pressurizing Valve leakage Test | 1 | |
| T-00001 | SPANNER WRENCH (PRESSURE SWITCH) | 1 | |
| T-00900-1 | Pressure Test Cap | 2 | |
| T-03-578 | GAUGE, PRESSURE, /-0.5% ACCURACY | 1 | |
| T-05641 | ARBOR AND GUIDE BUSHING, PRESSURE SWITCH WELD- MACHINING-TOOL | 1 | |
| T-05641-1 | "PRESSURE SWITCH WELD-MACHINING | 1 | |
| T-05641-2 | "PRESSURE SWITCH WELD-MACHINING | 1 | |
| T-05641-3 | PRESSURE SWITCH WELD MACHINING TOOL | 1 | |
| T-05641-4 | PRESSURE SWITCH WELD MACHINING TOOL | 1 | |
| T-05641-5 | PRESSURE SWITCH WELD MACHINING TOOL | 1 | |
| T-12252157 | CHARGING KIT PRESSURE | 1 | |
| T-1U5796 | PRESS DEFFERTL GAUGE KT | 1 | |
| T-200628 | SPRING COMPRESSOR | 1 | |
| T-24167 | BEARING PRESSING | 1 | |
| T-24349 | Bearing Pressing Tools | 1 | |
| T-24350 | BEARING PRESSING TOOL | 1 | |
| T-25622 | PULLER, SERVO PRESSURE REGULATOR ASSY. | 1 | |
| T-25758 | FIXTURE, TEST PRESSURIZING VALVE LEAKAGE | 1 | |
| T-25761 | PULLER, PRESSURIZING VALVE ASSEMBLY | 1 | |
| T-262775 | PRESSURE TEST PLUG | 3 | |
| T-262775 | PLUG PRESSURE TEST FILL FITING | 3 | |
| T-27290 | Spring Compressor | 2 | |
| T-29022 | PRESSURE VESEL | 1 | |
| T-304107 | Compressor Spring | 1 | |
| T-3200301 | HARRIS HIGH PRESSURE REGULATOR | 1 | |
| T-352 | PRESSURE TEST ADAPTER | 1 | |
| T-410870 | Compressor,Spring | 2 | |
| T-410872 | COMPRESSOR SPRING | 1 | |
| T-412380 | Compressor,Spring | 1 | |
| T-414955 | Spring Compressor | 1 | |
| T-415105 | Compressor Spring | 1 | |
| T-437881 | Compressor Spring | 1 | |
| T-438324 | Compressor,Spring | 1 | |
| T-438324PM | COMPRESSOR-SPRING | 1 | |
| T-456417 | Compression Tool | 1 | |
| T-457461 | Compression Tool | 1 | |
| T-457464 | Compression Tool | 1 | |
| T-457471 | Compression Tool | 1 | |
| T-457478 | Compression Tool | 1 | |
| T-457756 | Seal Compression | 1 | |
| T-475976-1-17 | CAP, PRESSURE TEST, NECK, LEFT HAND THREADS, UNTAAPPED, LEFTHAND THREAD | 1 | |
| T-475976-1-3 | CAP, PRESSURE TEST, NECK, RIGHT HAND THREADS | 1 | |
| T-475976-1-5 | PLUG, PRESSURE TEST, SWITCH FITTING | 1 | |
| T-47721 | Seal Pressure Tester | 1 | |
| T-66881 | Test Fixture, Housing Negative Pressure Test | 1 | |
| T-66999 | Test Fixture, Housing Positive Pressure Test | 1 | |
| T-68970 | TEST FIXTURE, PRESSURE | 1 | |
| T-6PA53 | EP350 BENCH DRILL PRESS SARC | 1 | |
| T-71681 | Torque Adapter, Pressure Differential Sensor | 1 | |
| T-71683 | Assembly Wrench, Pressure Differential Sensor | 1 | |
| T-8115900022 | COMPRESSOR | 1 | |
| T-8818171000 | Pressure Tester | 1 | |
| T-897465-51-2 | PRESSURE SWITCH WELD MACHINING TOOL | 1 | |
| T-897465-51-7 | TOOL, PRESSURE SWITCH WELD MACHINING | 1 | |
| T-897465-51-7K | TOOL, PRESSURE SWITCH WELD- MACHINING | 1 | |
| T-897465-7 | TOOL PRESS SWITCH WELD MACHINING | 1 | |
| T-A100007 | DISPENSING PUMP, AIR PRESSURE | 1 | |
| T-D55153 | COMPRESSOR - SARC | 1 | |
| T-HANDLE WRENCH | PRESSURE FILL CART (40 PSI MAXIMUM)-GSE1200461 | 1 | |
| T-SJ60101770 | 3/8 X 70 LOW PRESSURE HOSE | 1 | |
| T-TK-O | HARDWARE KIT FOR COMPRESSOR | 1 | |
| T008095 | NGS LEAK/PRESSURE TEST EQ | 1 | |
| T0132949 | WRENCH FOR MD-11 TIRE PRESSURE XDUCE | 1 | |
| T0206 | REGULATED PRESSURE TOOL | 1 | |
| T0356 | HYDRAULIC PRESSURE TEST KIT | 1 | |
| T03836 | HIGH PRESS CHUCK | 1 | |
| T05641 | PRESSURE SWITCH WELD MACHINING TOOL | 1 | |
| T05641-1 | PRESSURE SWITCH WELD MACHINING TOOL | 1 | |
| T05641-2 | PRESSURE SWITCH WELD MACHINING TOOL | 1 | |
| T05641-3 | PRESSURE SWITCH WELD MACHINING TOOL | 1 | |
| T05641-4 | PRESSURE SWITCH WELD MACHINING TOOL | 1 | |
| T05641-5 | PRESSURE SWITCH WELD MACHINING TOOL | 1 | |
| T05641-7 | CUTTER, 1.220 DIA, PRESSURE SWITCH WELD-MACHINING TOOL | 1 | |
| T05641-8 | CUTTER, 1.190 DIA, PRESSURE SWITCH WELD-MACHINING TOOL | 1 | |
| T05641-9 | CUTTER, 1.160 DIA, PRESSURE SWITCH WELD-MACHINING TOOL | 1 | |
| T06762-1 | FIXTURE OVERPRESSURE | 3 | |
| T100236 | ARBOR PRESS | 1 | |
| T100740 | ARBOR PRESS ADAPTER | 1 | |
| T101262-105 | PRESSER ASSEMBLY | 1 | |
| T101333 | PRESSING BAR | 1 | |
| T101334 | PRESSING BAR, ROTOR BRAKE BEARING | 1 | |
| T101599 | PRESSING TOOL | 1 | |
| T101621 | PRESS,RING SEAL | 1 | |
| T101880 | 90 DEGREE GEAR BOX SEAL PRESS | 3 | |
| T102 | BEARING PLATE PRESSING (ROTOR & FRAME ASSY) | 3 | |
| T103320-101 | PRESS SHAFT BAR (BAR) | 1 | |
| T103323-101 | PRESS-SHAFT BAR | 1 | |
| T11604 | TIRE PRESSURE GAUGE | 1 | |
| T11605 | TIRE PRESSURE GAUGE | 1 | |
| T11995 | Spring compression tool | 1 | |
| T127971-003 | PRESS ARBOR, EXPANSION PLUG | 1 | |
| T14574 | PRESSURE GAUGE | 1 | |
| T14574 | PRESSURE GAUGE | 1 | |
| T147265-1 | PRESSURE TEST FIXTURE | 1 | |
| T185 | SAVAPRESS PRESSING TOOL | 5 | |
| T190-488 | Press Tool | 1 | |
| T190-488 PM | PRESS TOOL | 1 | |
| T21-005 | CABIN PRESSURISATION UNIT | 1 | |
| T25622 | Puller, Servo Pressure Regulator Assy. | 1 | |
| T25758 | Fixture, Test pressurizing Valve Leakage | 1 | |
| T25761 | Puller, pressurizing valve assembly | 1 | |
| T259060 | PROBE ASSEMBLY, PRESSURE, ENGINE TEST | 1 | |
| T262775 | PRESSURE TEST PLUG | 3 | |
| T27257 | FIXTURE - DEPRESSING | 1 | |
| T2875-5 | SPRING COMPRESSING TOOL | 1 | |
| T2875-5 | SPRING COMPRESSING | 1 | |
| T3-2.2X3.2X8 | COMPRESSION SPRING ¿2.2 ID X ¿3.2 OD X 8 LENGHT | 1 | |
| T3006302 | DRILL PRESS | 1 | |
| T302839 | HOLDER BEARING PRESS | 1 | |
| T302840 | GUIDE BEARING PRESS | 1 | |
| T302841 | GUIDE BEARING PRESS | 1 | |
| T304107 | COMPRESSOR SPRING | 1 | |
| T32004 | BENJO ADAPTOR FOR PRESSURE SWITCH TESTING | 2 | |
| T3608-28 | Compression Tool | 1 | |
| T3695-11 | COMPRESSION TOOL | 1 | |
| T3754-02 | COMPRESSION RING | 1 | |
| T410870 | SPRING COMPRESSSOR | 2 | |
| T410872 | COMPRESSOR SPRING | 1 | |
| T412380 | COMPRESSOR - SPRING | 1 | |
| T414955 | COMPRESSOR SPRING | 1 | |
| T415105 | SPRING COMPRESSOR | 1 | |
| T42315-60SC1 | SPRING COMPRESSION FIXTURE | 1 | |
| T42315-72SC1-101 | SPRING COMPRESSOR ASSY | 1 | |
| T431456 | TOOL SPRING COMPRESSION | 1 | |
| T445838 | PRESS GAGE FIX | 1 | |
| T449014 | SPRING COMPRESSION TOOL | 1 | |
| T449539 | COMPRESSION TOOL (EATON AEROSPACE) | 1 | |
| T451373 | COMPRESSOR - SPRING | 1 | |
| T456417 | COMPRESSION TOOL | 1 | |
| T457461 | COMPRESSION TOOL | 1 | |
| T457464 | TOOL COMPRESSION | 1 | |
| T457471 | COMPRESSION TOOL | 1 | |
| T457478 | COMPRESSION TOOL | 1 | |
| T46437 | A350 TIRE PRESSURE SENSOR RATCHET | 6 | |
| T472421-1 | PRESSURE TEST CAP | 1 | |
| T48094 | PRESS PAD | 1 | |
| T48095 | PRESS PAD | 1 | |
| T48096 | PRESS PAD | 1 | |
| T48835 | COMPRESSION TOOL (FOR THE COMPRESSION OF THE PISTON SPRING) | 1 | |
| T5500 | PRESSURE GAGE | 1 | |
| T55853 | PRESSUR GAUGE | 1 | |
| T5734-203 | TOOL, COMPRESSOR SUPPORT | 1 | |
| T69588 | PIN PRESSING FIXTURE, P | 1 | |
| T700-GE-401 | COMPRESSOR WASH RIG | 1 | |
| T7055-01142-044 | ENGINE/TRANSMISSION OIL PRESSURE TEST BOX | 1 | |
| T743806 | BEARING PRESS FIXTURE | 1 | |
| T792994091000000D | THE DEVICE FOR SIMULATING THE UNCOMPRESSED POSITION OF THE OOSH | 1 | |
| T792994091000000H | THE DEVICE FOR SIMULATING THE UNCOMPRESSED POSITION OF THE OOSH | 1 | |
| T82192 | Probe Pressure | 1 | |
| T827866 | Probe Pressure | 1 | |
| T836651 | Shroud Pressure | 1 | |
| T836E | Shroud Pressure | 1 | |
| T8909-66 | 501KB7, air inlet pressure probe | 1 | |
| T892499 | ANVIL PRESS | 1 | |
| T895302-30 | PRESSURE TEST CAP | 1 | |
| T8955 | ADJUSTABLE COMPRESSION RIVETER | 1 | |
| T897465-51-2 | PRESSURE SWITCH WELD MACHINING TOOL | 1 | |
| T897465-51-5 | PRESSURE GAGE WELD MACHINING TOOL | 1 | |
| T897465-51-7 | TOOL, PRESSURE SWITCH WELD MACHINE | 1 | |
| T91788 | Bearing Press | 1 | |
| T91789 | Bearing Press | 1 | |
| T918B | MANDREL - BEARING PRESSING | 1 | |
| T92326 | Bearing Press | 1 | |
| T93025 | Bearing Press | 1 | |
| TA-14-6806-6011 | TIRE PRESS GAUGE LARGE BORE | 1 | |
| TA-840105-3 | ADAPTER, PROOF PRESSURE TEST | 1 | |
| TA02459 | HIGH PRESSURE CHUCK (61199 AND 65701 VALVES ONLY) | 1 | |
| TA04650 | Inlet Pressure Adapter | 1 | |
| TA04998 | Pressure Fixture | 1 | |
| TA04999 | Arbor Press and Crimping | 1 | |
| TA1004 | HIGH-PRESSURE PIPE | 1 | |
| TA1005 | HIGH-PRESSURE PIPE | 1 | |
| TA5000G001 | PRESSURE GENERATOR TANK | 1 | |
| TA5015G001 | BORESCOPE SUPPORT 6.4 MM FOR COMPRESSORS | 1 | |
| TA5024G001 | LOW PRESSURE FUEL PUMP WITH ALTERNATOR C | 1 | |
| TA5025G001 | HIGH PRESSURE FUEL PUMP CONTAINER | 1 | |
| TA840105-3 | PROFF PRESSURE TEST ADAPTER | 1 | |
| TAC-2T | AIR COMPRESSOR | 1 | |
| TAD2012K17AC | COMPRESSOR, BREATHING AIR | 1 | |
| TAM176153 | PRESS Test tools | 1 | |
| TAO2459 | HIGH PRESSURE CHUCK | 1 | |
| TAP1 | TRUCK ANCHOR PIN PRESS | 1 | |
| TAP1-3A | PRESSURE PAD BUSHING | 1 | |
| TAP1-4A | PRESSURE PAD PIN | 1 | |
| TAP1-5A | PRESSURE PAD FOR TAP1 | 1 | |
| TAS-1-GS4200-0001AB | BREATHER PRESS TESTER | 1 | |
| TAT006 | PUSHROD SPRING COMPRESSOR | 1 | |
| TB3013G002 | LOAD COMPRESSOR ASSEMBLY MEASUREMENT TOOL | 1 | |
| TB3020G302 | LOAD COMPRESSOR ASSEMBLY SLING | 1 | |
| TB3059G001 | LOAD COMPRESSOR | 1 | |
| TB3059G003 | LOAD COMPRESSOR IMPELLER EQUIVALENT MASS | 1 | |
| TB3080G001 | Press Fixture | 1 | |
| TB3087G001 | Press Fixture | 1 | |
| TB9072G001 | Oil Pressure Tube | 1 | |
| TC1019-4-11 | 501KB7, air inlet pressure probe | 1 | |
| TD3727-001 | PRESSING TOOL | 1 | |
| TD3727-002 | PRESSING TOOL | 1 | |
| TD3727-003 | PRESSING TOOL | 1 | |
| TD9176-GE4-CAL | PRESSURE TRANSDUCER-GEN 4 CART | 1 | |
| TDS-3 | COMPRESSOR WASH POST CLEANING DEBRIS DETECTION, TO DO ANOTHER COMP WASH SAMPLE MORE THAN 150PPM | 3 | |
| TE-0177H3 | FUEL SYS PRESSURE TEST PANEL | 1 | |
| TE-0801A | CABIN PRESSURIZATION CART | 1 | |
| TE00142158-4 | STATIC PRESS NEEDLE PROBE | 1 | |
| TE001U2158-4 | TEST EQPT-STATIC PRESSURE | 2 | |
| TE001U2158-4 EQUIVALENT | Static pressure needle probe | 1 | |
| TE21T-31001-24 | PLATE PRESS RELIEF | 1 | |
| TE27T-41001-8 | ELEV. PCU POGO ROD COMPRESSER | 1 | |
| TE371 | PRESSURE GAUGE 2"" | 1 | |
| TE60B80099 | TEST SET - AUTOTHROTTLE SYSTEM TOTAL AIR TEMPERATURE/ ENGINE PRESSURE RATIO LIMIT (TAT/EPRL) | 1 | |
| TE65B00112 | PRESSURE TEST SEAL PLUG INSTALLATION DRAWING WING SECTION 12 | 1 | |
| TE65B01102 | TEST EQUIPMENT - PRESSURE MANIFOLD, CENTER WING TANK | 1 | |
| TE65B07691 | PLUG - PRESSURE TEST | 1 | |
| TE65B07900 | PLUG - PRESSURE TEST | 1 | |
| TE65B84683 | TEST TOOL - PRESSURE VESSEL CARTRIDGE, TYPE A DOOR | 4 | |
| TE79-800PRESSADP/939 | ADAPTER CABIN PRESSURE TEST | 1 | |
| TE79-800PRESSADP939 | ADAPTER CABIN PRESSURE TEST | 1 | |
| TECO6-141-05 | AIR PRESSURE CONTROL (MANOMETER) | 1 | |
| TECO6-141-06 | PRESSURE GAUGE SYSTEM 0-150 BAR RESOLUT | 1 | |
| TEEQ01-AM020906/200 | TIRE INFLATION ADAPTER AND PRESSURE GAUGE | 1 | |
| TEG-G2500b | Digital Pressure Gauge Indicator | 1 | |
| TEK-4013 | Special Probe, Aft Pressure Bulkhead Tee | 1 | |
| TEK-5115 | SEARCH UNIT, 0 DEGREE, 5MHZ COMPRESSION | 1 | |
| TEKTUBE1/2" ID X 100 FT | FLEXIBLE NON TOXIC CLEAR HIGH PRESSURE, REINFORCED, PVC BRAIDED VINYL TUBING | 1 | |
| TEM-290000-002 | FITTING, HYDRAULIC PACKAGE GROUND SERVICE PRESS | 1 | |
| TER-82380 | Hydraulic EDP pressure tester | 1 | |
| TER82380 | TESTER, EDP PRESSURE SWITCH | 1 | |
| TEST-PRESSU-AIR | VALISE TEST PRESSU AIR | 1 | |
| TESTO 511 | ABSOLUTE PRESSURE METER | 2 | |
| TESTO511 | Absolute Pressure Meter | 2 | |
| TESTSET | ENGINE PRESSURE RATIO TESTER | 1 | |
| TF-1038-10*300 | PRESSURE HOSE ASSEMBLY | 2 | |
| TF-1039-02*300 | PRESSURE HOSE ASSEMBLY | 2 | |
| TF-1040-05*300 | PRESS HOSE | 4 | |
| TF-1040-05300 | EXTERNAL PRESSURE HOSE | 4 | |
| TF-10963 | SHUT-OFF VALVE SPRING COMPRESSION TOOL | 1 | |
| TF1005 | HOSE: BOSTFLEX,BLK,1IN ID, 200 PSI MAX WORKING PRESSURE | 1 | |
| TF1040-05/300 | PRESS HOSE | 4 | |
| TF50B10009 | NORMAL STATIC PRESS PORT COVER | 1 | |
| TF50B29501 | PRESSURE GAUGE | 1 | |
| TF50B29501-FAB | PRESSURE GAUGE | 1 | |
| TF50B32305 | CONTROL PRESSURE | 1 | |
| TF50B35101 | OXYGEN PRESSURE GAUGE TO-35-003 DASSAULT | 1 | |
| TF6592 | BLOCK (HIGH PRESSURE CHECK VALVE) TEST FIXTURE | 1 | |
| TF65921 | HIGH PRESSURE CHECK | 1 | |
| TG60X | PRESSURIZATION AND TIRE INFLATION OPERATIONS | 1 | |
| THX393 | UNIV. THRTL PEDAL DEPRESSOR | 1 | |
| TIEDEMANN | DYNAMOMETER, COMPRESSION-20DAN | 1 | |
| TIF160 | TIRE PRESSURE GAUGE/INFLATOR,DIAL TYPE,DUAL FOOT | 1 | |
| TIFHD160 | GAGE,PRESSURE,DIAL | 2 | |
| TIG10501 | BRAKE CLEVIS PIN PRESS | 1 | |
| TITREPAIR | COMPRESSOR CASE FORMING BLOCK | 1 | |
| TK 1738-6 | 02 SYSTEM TEST EQUIPMENT PRESSURE GAGE (0 TO 100 PSI) (MM 35-00-00 / 20-52-00) | 1 | |
| TK1738-5 | LOW PRESSURE TEST HARNESS (BEECHCRAFT CORP) | 1 | |
| TK1738-6 | PRESSURE GAGE (0 TO 100PSI) (BEECHCRAFT CORP) | 1 | |
| TK1794-10/934-3 | CABIN PRESSURE TESTER | 1 | |
| TK1794-8/917-1 | CABIN PRESSURE ADAPTER | 1 | |
| TK1794-8/934 | CABIN PRESSURE TESTER | 1 | |
| TK1794-8934 | CABIN PRESSURE TESTER | 1 | |
| TK2247-2/939 | GAUGE SET, BRAKE PRESSURE | 1 | |
| TK2253-4/93 | PNEUMATIC PRESSURE SUPPLY | 1 | |
| TK229-1/939 | MECHANICAL PUMP PRESSURE BLEEDER | 1 | |
| TK229/939 | MECHANICAL PUMP PRESSURE BLEEDER | 2 | |
| TL-99926NC | NOZZLE TEST SET/ COMPRESSOR WASH F2J | 1 | |
| TL099920 | HP COMPRESSOR WASH NOZZLE | 1 | |
| TL109739 | HP COMPRESSOR WASH NOZZLE | 1 | |
| TL109739 | NOZZLE WASH HP COMPRESSOR | 1 | |
| TL1164 | LEAD-TEST,PRESSURE SWITCH | 1 | |
| TL5598 | AIR PRESSURE ADAPTER | 1 | |
| TM 90102 | Assy Spray Nozzle, Compressore Wash | 1 | |
| TM0131G004 | INSPECTION TEMPLATE ASSY FOR AXIAL COMPRESSOR BLADES | 1 | |
| TM01609G001 | POCKET DIGITAL PRESSURE GAUGE | 1 | |
| TM01807G001 | HYDRAULIC PRESSURE GENERATOR | 1 | |
| TM0188G001 | TANK PRESSURE GEN | 1 | |
| TM0188G002 | TANK, PRESSURE GENERATOR | 1 | |
| TM0588P223 | PRESSURE GAUGE | 1 | |
| TM0807G001 | PRESSURE GENERATOR | 3 | |
| TM0807G001/PHP | HYDRAULIC PRESSURE GENERATOR | 1 | |
| TM08107G0001 | PRESSURE GENERATOR (TPME ENGINE) | 1 | |
| TM08313G001 | POCKET PRESSURE-GAUGE ASSY | 1 | |
| TM0831G001 | DIGITAL PRESSURE GAUGE | 1 | |
| TM1198G001 | L/H PRESSURE PUMP BLANK | 1 | |
| TM1609G001 | POCKET PRESSURE-GAUGE ASSY | 5 | |
| TM1609G001/PHP | DIGITAL PRESSURE GAUGE | 1 | |
| TM20H28502 | MANO PRESSURISATIUON | 1 | |
| TM2283G001 | COMPRESSOR WASHING K | 1 | |
| TM2296G001 | LOW PRESSURE PUMP CONDITIONING | 1 | |
| TM2390G001 | PRESSURE TAPPING ADAPTOR | 2 | |
| TM2814G001 | COMPRESSOR WASH KIT | 2 | |
| TM3077G001 | SLAVE COMPRESSOR CASING | 1 | |
| TM3199G002 | OIL PRESSURE PLUG | 1 | |
| TM32201006 | TIRE PRESSURE RELIEF | 1 | |
| TM4309G001 | COMPRESSOR CONTAINER | 1 | |
| TM5663G001 | BOX TO CONTROL PRESSURE | 1 | |
| TM6628G001 | PRESS TOOL | 1 | |
| TM6638G001 | PRESS TOOL | 1 | |
| TM6935G001 | EROSION GAGE INSPECTION TEMPLATE ASSY FOR AXIAL COMPRESSOR BLADES | 2 | |
| TM6936G001 | ENGINE COMPRESSOR EROSION CHECK TEMPLATE ASSEMBLY D23 | 3 | |
| TM807G001 | PRESSURE GENERATOR | 1 | |
| TM8117G001 | PRESSURE GENERATOR | 1 | |
| TM90102 | SPRAY NOZZLE ASSY,COMPRESSOR WASH | 1 | |
| TMA1013 | Bearing Press Tool | 1 | |
| TMA2199 | Bearing Press Tool | 1 | |
| TMA2200 | Bearing Press Tool | 1 | |
| TMA2241 | Bearing/Spacer Press Tool | 1 | |
| TMA25123-K80 | PRESSURE VERIFICATION CASE | 1 | |
| TMAC-170 | 170 PPM COMPRESSOR | 1 | |
| TMAC-250 | 250 PPM COMPRESSOR | 1 | |
| TMAC-375 | AIR START, TURBINE COMPRESSOR - CART | 1 | |
| TMD-150 | AIR START, TURBINE COMPRESSOR - CART | 1 | |
| TMD-180 | AIR START, TURBINE COMPRESSOR - CART | 1 | |
| TMD-250 | AIR START, TURBINE COMPRESSOR - CART | 1 | |
| TMD-270 | AIR START, TURBINE COMPRESSOR - CART | 1 | |
| TMD-400 | AIR START, TURBINE COMPRESSOR - CART | 1 | |
| TMH AE12-00-00 | 1000 KN COMPRESSIVE FORCE TRANSDUCER KIT | 1 | |
| TMH CR14 | Damper Compression Jack - 3.3 Ton | 1 | |
| TMH DI12-00-00 | Tire Pressure Gauge (0-600 psi) | 1 | |
| TMH DI16-11-00 | PRESSURE GAGE ADAPTER | 3 | |
| TMH MD02-20-00 | PRESSURE REDUCER | 1 | |
| TMH MD05-40-00 | PRESSURE CONTROLER FOR WHEELS | 1 | |
| TMH MD13-80-16 | Pressure Gauge - 0-16bar | 1 | |
| TMH MD13-80-60 | PRESSURE GAUGE | 1 | |
| TMH MD13-81-00 | PRESSURE GAUGE | 1 | |
| TMH MD13-82-50 | PRESSURE GAUGE | 1 | |
| TMH MD13-84-00 | PRESSURE GAGUE 0 TO 400 BAR | 1 | |
| TMH-GA35-00-00 | MANO PRESSURE GAGE | 1 | |
| TMHDI16-11-00 | PRESS GAUGE ADAPTER - FEM M10X1 / FEM. NATO (ref SE12-00) | 3 | |
| TMHMD02-20-00 | PRESSURE REDUCER | 1 | |
| TMHMD13-80-16 | PRESSURE GAUGE | 1 | |
| TMHMD13-80-60 | PRESSURE GAUGE 0-60 BAR | 1 | |
| TMHMD13-81-00 | PRESSURE GAUGE | 1 | |
| TMHMD13-81-02 | PRESSURE GAUGE DIA 80 0/400 BAR | 1 | |
| TMHMD13-82-50 | PRESSURE GAUGE | 1 | |
| TMY 20-27-002 | PRESSURE GREASING TOOL KIT | 1 | |
| TMY 20-27-003 | PRESSURE GREASING TOOL KIT | 1 | |
| TMY 20-27-004 | PRESSURE GREASING TOOL KIT | 1 | |
| TMY20-27-005-1 | PRESSURE GREASING TOOL KIT | 1 | |
| TMY20-27-601 | TOOL SET FOR PRESSURE GREASING OF FLIGHT CONTROL LINKAGE BEARINGS | 1 | |
| TMY20-28-503-1 | ADAPTER FOR WING TANK PRESSURE CHECK | 2 | |
| TMY20-28-5031 | TOOL FUEL PRESSURE | 2 | |
| TMY20-32-351 | PRESS CHECKING TOOL | 1 | |
| TMY20-32-351-1 | MANO VERIF PRESSURE FREIN | 1 | |
| TMY20-34-203-1 | STAND-BY STATIC PRESSURE PORT COVER | 1 | |
| TN313227 | TOOL, SAFETY NET PRESSURIZATION | 3 | |
| TO 6762-1 | FIXTURE , OVER PRESSURE | 3 | |
| TO-20-110 | PRESSURE GAUGE 0 TO 0.15 PSI | 1 | |
| TO-20-130 | PRESSURE GAUGE - 0 TO 15 PSI (0 TO 1 BAR) | 1 | |
| TO-20-130 | PRESSURE GAUGE - 0 TO 15 PSI | 1 | |
| TO-20-140 | PRESSURE GAUGE 0- 150PSIG | 1 | |
| TO-20-145 | PRESSURE CHECK OF THE MLG AND NLG WHEEL TIRES | 1 | |
| TO-32-310 | TIRE REMOVAL PRESS | 1 | |
| TO-35-003 | OXYGEN PRESSURE GAUGE | 1 | |
| TO-36-020 | CABIN PRESSURIZATION TEST ADAPTER | 1 | |
| TO3836 | HIGH PRESSURE CHUCK | 1 | |
| TO3840 | HIGH PRESSURE CHUCK | 1 | |
| TO6762-1 | OVER PRESSURE FIXTURE | 3 | |
| TO6762-1/-3 | OVERPRESSURE FIXTURE | 1 | |
| TO6762-2 | FIXTURE OVER PRESSURE ( CMM #- 25-61-41 ) | 1 | |
| TO6762-3 | FIXTURE OVER PRESSURE ( CMM #- 25-61-39 ) | 1 | |
| TO6762-4 | FIXTURE, OVERPRESSURE | 1 | |
| TO6762-5 | FIXTURE, OVERPRESSURE | 1 | |
| TO6762-6 | FIXTURE, OVERPRESSURE | 1 | |
| TO6762-7 | FIXTURE OVERPRESSURE (POST S.B. A321 005-25-15) | 1 | |
| TP687 | VALVE SPRING COMPRESSSOR | 4 | |
| TPCS-1 | TYRE PRESSURE KIT | 1 | |
| TPCS1 | PRESSURE GAUGE | 1 | |
| TPCS1/SCA | TIRE PRESSURE GAUGE | 1 | |
| TPG | TYRE PRESSURE GAUGE TOOL | 1 | |
| TPG15 | TIRE GAUGE LOW PRESSURE ATV | 1 | |
| TPG54 | TIRE PRESSURE GAUGE | 1 | |
| TPG5403 | TWIN HEAD TYRE PRESSURE GAUGE 50-300PSI | 1 | |
| TPG54403 | TWIN HEAD STICK TYRE PRESSURE GAUGE | 1 | |
| TPG54H03 | TWIN HEAD STICK TYRE PRESSURE GAUGE | 11 | |
| TPG60H03 | GAUGE,TYRE PRESSURE | 1 | |
| TPGAGE1 | TYREPRESSUREGUAGE_0400PSI | 1 | |
| TPGD150 | DIGITAL PRESSURE GAUGE | 2 | |
| TPGDL | TIRE PRESSURE GAUGE / TIRE INFLATION KIT | 1 | |
| TPGDL1000C | TIRE PRESSURE GAUGE | 1 | |
| TPGDL150 | DIGITAL TIRE PRESSURE | 2 | |
| TPGP120DF | TYRE PRESSURE GAUGE PENCIL TYPE, 0-120 PSI | 1 | |
| TPI610C5 | PRESSURE AND TEMPERATURE SET | 1 | |
| TPIA630 | 10000 PSI PRESSURE ADAPTER | 1 | |
| TPIDPM2000MM | DUAL PRESSURE METER | 1 | |
| TPMS5 | TIRE PRESSURE MONITORING SYSTM | 1 | |
| TPR 250-500-580 | LOW PRESSURE REGULATOR 600 PSI MAX | 1 | |
| TPR-250-300-580 | LOW PRESSURE REGULATOR | 1 | |
| TPR250-500-580 | DUAL HIGH PRESSURE REGULATOR | 1 | |
| TPS 800 | CPRESSURES 2014 (SQUARESPACE.COM) | 1 | |
| TPS-300K | TANK PRESSURIZATION SYSTEM | 1 | |
| TPS100K | TANK PRESSURIZATION SYSTEM | 1 | |
| TPS300K | TANK PRESSURIZATION SYSTEM | 1 | |
| TPS800DBA320 | TANK PRESS SYSTEM | 1 | |
| TR405 | HYD BRAKE SYS PRESS C | 1 | |
| TS.790.10.XX MKXX | PRESSURE TEST PLUGS/FITTINGS | 1 | |
| TS2066 | PROOF PRESSURE BOX | 1 | |
| TS43R1 7 | BLANK (F), JET PUMP PRESSURE PIPE | 1 | |
| TS78R73A | Blank, Pitot Pressure Bleed | 1 | |
| TS78R75A | Adaptor-pitot pressure orifice | 2 | |
| TS78R83A | Adaptor-pitot pressure orifice | 1 | |
| TSF5T-52001-2 | COVER PLATE, CABIN PRESSURE RELIEF VALVE KIT | 1 | |
| TSF7341023311 | FUEL JETTISON PRESSURE LEAK KIT | 1 | |
| TSFFAD48HTST28Z041 | BOTTOM PRESSURE TEE ADAPTER KIT | 1 | |
| TSFFT1U2820-19 | PRESSURE TEST TOOL | 2 | |
| TSJ-1544341-7 | TEST PLUG FOR PRESSURE REDUCER | 1 | |
| TSJ65B91267 | TEST FIXTURE - ENGINE PRESSURE RATIO (EPR) SYSTEM Pt2 PROBE | 1 | |
| TSS 5/16 | SCREWDRIVER - TORQUE SET (CABIN PRESSURE OUTFLOW VALVE) (COOPER INDUSTRIES INC.) | 1 | |
| TSY892651A1A | PRESSURE METER HOSE ASSY | 1 | |
| TSY91-803135 | FUEL PRESSURE ADAPTOR KIT | 1 | |
| TTL-300-ATG-I | TIRE PRESSURE GAUGE | 1 | |
| TTL-300-DPSI | DIGITALPRESSURE GAUGE | 1 | |
| TTL-300-DTG | 300PSI Digital Pressure Gauge | 3 | |
| TTL-300-DTG-K | 300 PSI DIGITAL PRESSURE GAUGE KIT | 5 | |
| TTL-300-DTGK | DIGITAL PRESSURE GAUGE | 5 | |
| TTL-300-DTI-HA | TIRE PRESS GAUGE DIGITAL 0-300PSI | 2 | |
| TTU-205C/E | Pressure temperature test set | 1 | |
| TTU-205H | TEST SET, PRESSURE TEMPERATURE | 1 | |
| TTU-205J | TEST SET, PRESSURE TEMPERATURE | 2 | |
| TTU205E | TEST SET PRESSURE | 1 | |
| TU205 | PRESSURE TEMP TEST SET(89944-1891001 | 1 | |
| TW60 | PowerAll Systems TW60 Shop Air Powered Turbine Engine Compressor Washer | 1 | |
| TW60-AT | PowerAll Systems TW60-AT 5-Gallon Compressed Air Tank Turbine Engine Compressor Wash System | 1 | |
| TXX001517 | MD11 OVER PRESSURE VALVE TEST ADAPTE | 1 | |
| TYPE U21902 | TEST PRESS | 1 | |
| TYPE-SUMO-TS60 | COMPRESSOR 3 BARS 44 PSI | 1 | |
| TYRE PRESS | TYRE PRESS MANOMETER | 1 | |
| TZ-2255 | TOOL INSERT PRESS | 4 | |
| U21902200 | HYDRAULIC TEST PRESS | 1 | |
| U21905 | LOW-PRESSURE TEST CONSOLE | 1 | |
| U21905000 | LOW-PRESSURE TEST BENCH | 1 | |
| U21905120 | LOW-PRESSURE TEST RIG | 1 | |
| U21905200 | LOW PRESSURE TEST RIG | 1 | |
| U21905210 | LOW PRESSURE TEST RIG | 1 | |
| U21910200 | HYDRAULIC TEST PRESS | 1 | |
| U21910XXX | PRESS TEST RIG / CONSOLE | 1 | |
| U21992 | COMPRESSION TOOL | 1 | |
| U21992000 | COMPRESSION TOOL | 2 | |
| U541483-T3 | PRESSURE DROP TEST FIXTURE | 1 | |
| U541515-T2A | PRESSURE TEST FIXTURE | 1 | |
| U541515-T2B | PRESSURE TEST FIXTURE | 1 | |
| U8720741 | Wedge 7 deg compression | 1 | |
| U87207884 | COMPRESSION WEDGE | 1 | |
| UD2550 | GUAGE AIR COMPRESSOR | 1 | |
| UDB911684 | REAMER, PILOTED .346 - .332 OVERSIZE PRESS NUT | 1 | |
| UDB911686-1 | REAMER, PILOTED .49 - .476 OVERSIZE PRESS NUT | 1 | |
| UDT3 | Bench Press Style Open Fram Crimp Tool for Use with X DIES | 2 | |
| UDT5 | Bench Press Style Open Frame Crimp Tool For "Y" Dies | 1 | |
| UH60-112 | ENGINE INTAKE COVERS (H60-G), IR suppressor models (set of 2) | 1 | |
| UH60-153 | EXHAUST COVERS (Soft TYPE, FOR IR SUPPRESSOR MODELS) (set of 2) | 1 | |
| UMA 4-360-030U | PRESSURE INDICATOR | 1 | |
| UNIK 5000 | PRESSURE SENSOR | 1 | |
| UNIK 5000, PTX50A2-TB-A1-CA-H1 | PRESSURE SENSOR | 1 | |
| UNIK5000 | PRESSURE SENSOR | 1 | |
| UR0118010000000 | PRESSURE PICK-OFF PLUGS | 1 | |
| US114CC | HIGH OUTPUT C-TYPE COMPRESSION RIVETER | 1 | |
| US114TA-1 1/2 | ALLIGATOR-TYPE COMPRESSION RIVETER | 1 | |
| US114TAA-1 1/2 | COMPRESSION RIVETER-ALLIGATOR | 2 | |
| US114TCC | HIGH OUTPUT C-TYPE COMPRESSION RIVETER | 3 | |
| USG 0-160PSI | PRESSURE GAUGE | 1 | |
| UT1067 | TOOL - TURN, TIGHT ENGINE - HIGH PRESSURE SYSTEM | 1 | |
| UT1255 | CAP - PRESSURE, P5.0 MANIFOLD | 1 | |
| UT440/1 | COMPRESS SPEED TEST SET | 2 | |
| UT977 | TOOL - TURN, HIGH PRESSURE SYSTEM | 2 | |
| UV30-102-04 | PRESSURE SWITCH | 1 | |
| UV30-102-06 | PRESSURE GAUGE | 1 | |
| UZ9605010000000 | PRESSURE TEST PLATE | 1 | |
| UZA022410000000 | BY-PASS VALVE COMPRESSION TOOL | 1 | |
| V-0.25/ | AIR COMPRESSOR | 1 | |
| V-0.25/8 | AIR COMPRESSOR | 1 | |
| V-STD-C-009 | PRESS GAUGE - MITALUB 350 PSI / 25 BAR | 1 | |
| V-STD-C-011 | PRESS GAUGE - MITALUB 1500 PSI / 100 BAR | 1 | |
| V-STD-C-012 | PRESS GAUGE - MITALUB 3000 PSI / 200 BAR | 1 | |
| V/1945-02-05 | AIR PRESSURE GAGE_(0 ~ 30) IN.HG (0.1) ±0.5 %_[V/1945-02-05] | 1 | |
| V07005500000080 | Tire pressure gauge | 1 | |
| V21805 | COMPRESSION TOOL TO REMOVE THE SPRING OF THE VALVE | 1 | |
| V25SH-0108(P) | TEST ADAPTER FOR PRESSURE | 1 | |
| V25SH2022 | PRESSURE TEST TOOL | 1 | |
| V2SH-0110(P) | TEST ADAPTER FOR PRESSURE | 1 | |
| V501P4 | LOW PRESSURE BALL VA | 1 | |
| VACLAV 1 | HIGH PRESSURE EQUIPMENT | 2 | |
| VACLAV1 | HIGH PRESS EQUIPMENT LAV VAC SYSTEM | 2 | |
| VALCAV 1 | HIGH PRESS EQUIPMENT LAV VAC SYSTEM | 1 | |
| VG8-12D | TIRE PRESSURE GAGE | 1 | |
| VIC0781-1448 | HIGH PRESSURE REGULATOR | 2 | |
| VIV72928-1 | LEAK PRESS TESTE | 1 | |
| VJT0545 | AIR COMPRESSOR 10 BAR | 1 | |
| VKT-LYB300C-1.0 | GAGE - PRESSURE, TIRE (FOR A320) | 1 | |
| VP0L51B4 | PROP PRESSURE LIMIT VALVE | 1 | |
| VPS-BOX | OVER PRESSURE SUYSTHEME | 1 | |
| VR-L11-0010 | PRESSING FIXTURE | 1 | |
| VR-L11-0010-002-2 | PRESS TOOL | 1 | |
| VRG3 | VACUUM RATE DIGITAL PRESSURE GAUGE | 1 | |
| VST100 | VALVE SPRING COMPRESSOR | 1 | |
| VSV-089-ALA | MANOMETER, MEASURING AIR PRESSURE | 1 | |
| VTS450E | AIR PRESS REGULATOR | 1 | |
| VW-F-1094-24 | PRESSURE CARTRIDGE SIMULATOR | 1 | |
| W.415WBA | 15T SHORT HYDRAULIC WORKSHOP PRESS | 1 | |
| W000290284 | LP PRESSURE NITROGEN REGULATOR | 1 | |
| W000290326 | HP PRESSURE NITROGEN REGULATOR | 1 | |
| W1151 | PRESSING,TOOL | 1 | |
| W1166 | PRESSING,TOOL | 1 | |
| W305 | SHEETMETAL BRAKE 3-IN-1 12-INCH, SHEAR PRESS BRAKE 20-GAUGE | 1 | |
| W931-CB-117 | COMPRESSION SPRING | 1 | |
| WA23FP | Foot Press | 1 | |
| WAEBPT02 | BACK PRESSURE TESTER | 1 | |
| WC31540 | WRENCH ROTATING, HP COMPRESSOR | 1 | |
| WC67K | DE-15 ECONOMICAL CNC BENDING MACHINE HYDRAULIC PRESS BRAKE WITH SERVO MOTOR | 1 | |
| WC67Y | PRESS BRAKE MACHINE CNC | 1 | |
| WC67Y 63/2500 | PRESS BRAKE MACHINE CNC | 1 | |
| WC67Y 63/2500 | PRESS BRAKE MACHINE CNC | 1 | |
| WIKA 5000 | Pressure Guage | 1 | |
| WIKA 9767169 | PRESSURE GAUGE 0-5000 PSI | 1 | |
| WIKA233-30-063-300PSI | PRESSURE GAUGE STAINLESS STEEL WITH LOWER MOUNT ¼” NTP (RANGE 0-300PSI) (WIKA) | 1 | |
| WIKA233-30-063-400 | PRESSURE GAUGE | 1 | |
| WIKA233-30-063-5000PSI | PRESSURE GAUGE STAINLESS STEEL WITH LOWER MOUNT ¼” NTP (RANGE 0-5000PSI) (WIKA) | 1 | |
| WLB1982713 | COMPRESSOR CRAFSMAN | 1 | |
| WMH11698 | X Y AXIS DRILL PRESS VISE | 1 | |
| WMH13401 | 4IN DRILL PRESS VISE | 1 | |
| WMH354170 | FLOOR DRILL PRESS | 1 | |
| WMH354400 | 110V DRILL PRESS | 1 | |
| WMH354401 | 110V DRILL PRESS | 1 | |
| WMH354402 | FLOOR DRILL PRESS 220VOLT | 1 | |
| WMH354550 | 15IN VAR SPD FLOOR DRILL PRESS | 1 | |
| WMH63239 | DRILL PRESS VISE | 1 | |
| WORKAID NO. 6 | PRESS PLATE | 1 | |
| WPG60PSI | WATER PRESSURE GAUGE 0-60 PSI | 1 | |
| WPP 15 T | HYDRAULIC WORKSHOP PRESS | 1 | |
| WS6102250000 | PISTON COMPRESSOR OIL 1 LITRE | 1 | |
| WS7250260000 | 3HP PRESSURE SWITCH ASSEMBLY | 1 | |
| WSTQ400384 | PROPELLER BLADE COMPRESSION TOOL | 1 | |
| WT-00323-1 | PRESSURE TEST CAP | 1 | |
| WT-00323-2 | PRESSURE TEST CAP | 1 | |
| WT-00343-1 | PRESSURE TEST CAP (NECK) (WITH HOLE) | 1 | |
| WT-00444 | PRESSURE TEST FITTING | 1 | |
| WT-00834 | PRESSURE SWITCH WELD MACHINING TOOL | 1 | |
| WT-00904-4 | SHIELD, ARGON, PRESSURE SWITCH | 1 | |
| WT-02383 | HEAT SINK PRESSURE SWITCH | 1 | |
| WT-62814 | BACK-PRESS FORE TEST FIXT. | 1 | |
| WT-88756 | PRESSURE WASH NOZZLE | 1 | |
| WT-88765 | PRESSURE WASH NOZZLE | 1 | |
| WT-88766 | PRESSURE WASH NOZZLE | 1 | |
| WT-88767 | PRESSURE WASH NOZZLE | 1 | |
| WT-88802 | PRESSURE WASH NOZZLE | 1 | |
| WT-88803 | PRESSURE WASH NOZZLE | 1 | |
| WT-88875 | PRESSURE WASH NOZZLE | 1 | |
| WT00045 | PRESSURE TEST PLUG | 1 | |
| WT00323 | PRESSURE TEST PLUG | 1 | |
| WT00323-1 | PRESSURE TEST CAP | 1 | |
| WT00323-2 | PRESSURE TEST CAP | 1 | |
| WT00444 | PRESSURE TEST FITTING | 1 | |
| WT00659 | PRESSURE TEST FITTING | 1 | |
| WT00834 | PRESSURE SWITCH WELD MACHINING TOOL | 1 | |
| WT00896 | PRESSURE TEST PLUGING | 1 | |
| WT01241 | PRESSURE TEST PLUG | 1 | |
| WT02383 | HEAT SINK PRESSURE SWITCH | 1 | |
| WWG1F132 | PRESS SEAL | 1 | |
| X-250C | FORCE GAGE(COMPRESSION)_(0 ~ 250) LBF (1 DIV:2.5 LBF)_[X-250C] | 1 | |
| X-50C | FORCE GAGE(COMPRESSION)_(0 ~ 50) LBF (1 DIV:0.5 LBF)_[X-50C] | 1 | |
| X11-P001 | MANOMETER TO TEST HYDRAULIC PRESSURE | 1 | |
| X11-P002 | MANOMETER TO TEST PRESSURE ON THE ACCUMULATOR | 1 | |
| X126215 | UNISON IGNITER PRESSURE CYLINDER | 1 | |
| X375-TC-28V-G2 | HIGH PRESSURE TRANSFER PUMP | 1 | |
| X42240031506310 | PRESSURE GAUGE | 1 | |
| X42340002506310 | PRESSURE GAUGE | 1 | |
| X42340025006310 | PRESSURE GAUGE | 1 | |
| X43340025006310 | PRESSURE GAUGE | 1 | |
| XA77E | COMPRESSOR | 1 | |
| XJ-086 | VACUUM PRESSURE GAUGE(-30~30PSI) | 1 | |
| XLDP5MB2425T10 | DIFFERENTIAL PRESSURE TRANSDUCER | 1 | |
| XP-25 | COMPRESSOR UNIT, ROTARY | 1 | |
| XP-25,MC20-WHTZ-T4F-E01 | ROTARY AIR COMPRESSOR UNIT | 1 | |
| XZT S2 | LOADING GAS NITROGEN KIT FOR SCHARADER, PRESSION TEST, NO AIR LOSS CHUCK COUPLING, XZT S2 | 1 | |
| Y 132M-4 | AIR COMPRESSOR | 1 | |
| Y-60 | TIRE PRESSURE GAUGE | 1 | |
| Y1022 | TERMINAL PRESSING PLIERS | 2 | |
| Y11-N198J | HIGH PRESSURE REGULATOR W/HOSE | 1 | |
| Y132M-4 | PORTABLE COMPRESSOR | 1 | |
| Y29NC | PNEUMATIC HYPRESS | 1 | |
| YA188LR-4 | PRESSED BEARING AND NUT | 1 | |
| YA4000B | VACUUM PRESSURE PUMP | 3 | |
| YA449B | PORTABLE PRESSURE BLAST SYSTEM | 1 | |
| YA4826PA | PRESSURE FEED SAND BLASTER | 1 | |
| YA621A | PRESS HYDRAULIC | 1 | |
| YA621A (CG170HY) | PRESS HYDRAULEC (CG170HY) | 1 | |
| YA734A | PRESSURE GREASE GUN | 5 | |
| YA742 | BEARING PACKER, PRESSURIZED (9/16" ID MI | 2 | |
| YA870 | COMPRESSION WHISTLE, RIDGED | 1 | |
| YA871 | COMPRESSION WHISTLE, FLEXIBLE | 1 | |
| YA9140A-2 | 7/8 DEPRESSING TUBE | 1 | |
| YA9140B | UNIV VALVE SPRING COMPRESSOR | 1 | |
| YA999 | AIR PRESSURE REGULATOR | 1 | |
| YAD362402 | 100LB PRESSURE TANK | 1 | |
| YADW861 | PRESSURE SWITCH ASSEMBLY | 1 | |
| YAT95560 | 8 FT VAC PRESSURE HOSE | 1 | |
| YM502 | PRESSURE REGULATOR | 1 | |
| YR-303 | HIGH PRESSURE PISTON | 1 | |
| YTRONAIR PC-1011 | ADAPTOR, HIGH PRESSURE N | 1 | |
| YYL-300-ATG-I | TIRE PRESSURE GAUGE | 1 | |
| YYZCF34-8E10E | ADAPTER, CF34 ENGINE PRESSURIZATION (BOX 1) | 1 | |
| Z-1063-06 | RING, COMPRESS, BEADBREAKER, W/O CHINES | 1 | |
| Z-1063-07 | RING, COMPRESS, BEADBREAKER, W/O CHINES | 1 | |
| Z-1063-08 | RING, COMPRESS, BEADBREAKER, W/O CHINES | 2 | |
| Z-1063-09 | RING, COMPRESS, BEADBREAKER, W/O CHINES | 2 | |
| Z-1063-10 | RING, COMPRESS, BEADBREAKER, W/O CHINES | 1 | |
| Z-1063-11 | RING, COMPRESS, BEADBREAKER, W/O CHINES | 3 | |
| Z-1063-12 | RING, COMPRESS, BEADBREAKER, W/O CHINES | 1 | |
| Z-1063-13 | RING, COMPRESS, BEADBREAKER, W/O CHINES | 6 | |
| Z-1063-14 | RING, COMPRESS, BEADBREAKER, W/O CHINES | 3 | |
| Z-1063-15 | RING, COMPRESS, BEADBREAKER, W/O CHINES | 3 | |
| Z-1063-16 | RING, COMPRESS, BEADBREAKER, W/O CHINES | 2 | |
| Z-1063-17 | RING, COMPRESS, BEADBREAKER, W/O CHINES | 6 | |
| Z-1063-18 | RING, COMPRESS, BEADBREAKER, W/O CHINES | 3 | |
| Z-1063-19 | RING, COMPRESS, BEADBREAKER, W/O CHINES | 5 | |
| Z-1064-06 | RING, COMPRESS, BEADBREAKER, W/CHINES | 2 | |
| Z-1064-07 | RING, COMPRESS, BEADBREAKER, W/CHINES | 2 | |
| Z-1064-08 | RING, COMPRESS, BEADBREAKER, W/CHINES | 2 | |
| Z-1064-09 | RING, COMPRESS, BEADBREAKER, W/CHINES | 1 | |
| Z-1064-10 | RING, COMPRESS, BEADBREAKER, W/CHINES | 3 | |
| Z-1064-11 | RING, COMPRESS, BEADBREAKER, W/CHINES | 3 | |
| Z-1064-12 | RING, COMPRESS, BEADBREAKER, W/CHINES | 3 | |
| Z-1064-13 | RING, COMPRESS, BEADBREAKER, W/CHINES | 3 | |
| Z-1064-14 | RING, COMPRESS, BEADBREAKER, W/CHINES | 4 | |
| Z-1064-15 | RING, COMPRESS, BEADBREAKER, W/CHINES | 3 | |
| Z-1064-16 | RING, COMPRESS, BEADBREAKER, W/CHINES | 3 | |
| Z-1064-17 | RING, COMPRESS, BEADBREAKER, W/CHINES | 2 | |
| Z-1064-18 | RING, COMPRESS, BEADBREAKER, W/CHINES | 2 | |
| Z-1064-19 | RING, COMPRESS, BEADBREAKER, W/CHINES | 2 | |
| Z-1064-20 | RING, COMPRESS, BEADBREAKER, W/CHINES | 2 | |
| Z-3072-20 | RING, COMPRESS, BEADBREAKER, W/O CHINES | 3 | |
| Z1063-08 | RING: COMPRESS,BEADBREAKER 8, | 2 | |
| Z1063-09 | RING: COMPRESS,BEADBREAKER, W/O CHINES | 2 | |
| Z1063-11 | RING: COMPRESS,BEADBREAKER, W/O CHINES | 3 | |
| Z1063-18 | RING: COMPRESS,BEADBREAKER, W/O CHINES | 3 | |
| Z1064-11 | RING: COMPRESS,BEADBREAKER, W/CHINES | 3 | |
| Z1064-15 | RING: COMPRESS,BEADBREAKER, W/CHINES | 3 | |
| Z1064-16 | RING: COMPRESS,BEADBREAKER, W/CHINES | 3 | |
| Z230139 | CAP PRESSURE TEST | 1 | |
| Z2380 | PRESSURE GAUGE | 1 | |
| Z3072-20 | RING: COMPRESS,BEADBREAKER | 3 | |
| Z3072-22 | RING: COMPRESS,BEADBREAKER | 2 | |
| Z4018-1 | REGULATOR: PRESSURE,LOW,ASSEMBLY | 1 | |
| Z4644 | GAUGE: DIGITAL TIRE PRESSURE | 1 | |
| ZAW623-01 | PRESSURE TRANSDUCER | 4 | |
| ZGFPHP03PRO | Groz High Pressure Grease Pump 18-20Kg | 1 | |
| ZHPGP | High Pressure Grease Pump 12.5kg | 1 | |
| ZHPZS | High Pressure Z Swivel | 1 | |
| ZIM122 | VALVE SPRING COMPRESSOR | 1 | |
| ZIM216-10-13 | RING COMPRESSOR | 1 | |
| c32016-10 | compressor Assembly Half | 4 | |
| f 72903-24 | Oil Breather Press Test Equipment | 4 | |
| f72903-24 | Oil Breather Press Test Equipment | 4 | |
| gse196-ltc52073 | COMPRESSOR, SPRING ROD-OVERWING EMER-GENCY DOOR | 1 | |
| lC5797 | DRIVER SET-LOW PRESSURE TURBINE SHROUDS | 1 | |
| lC5906 | TOOL SET, INSPECTION-LOW PRESSURE TURBINE ROTOR BLADES | 1 | |
| lC5964 | SLING, LIFT-HIGH PRESSURE TURBINE NOZZLE ASSEMBLY | 1 | |
| lC600l | FIXTURE, HOLDING- LOW PRESSURE TURBINE ROTOR FORWA | 1 | |
| lC6065 | FIXTURE, CONCENTRICITY CHECK-LOW PRESS. TURBINE ROTOR | 1 | |
| lC6299 | GAGE SET, INSP. SEAL STATIONARY AIR, AFT PRESS. BAL. | 1 | |
| lC688l | TEST SET, PRESS CHK FUEL SHROUDED MNFLD & FEEDER TUBE | 1 | |
| lC689l | EYE, LIFT LOW PRESSURE TURBINE ROTOR-AFT | 1 | |
| lC6987 | EYE, LIFT-HIGH PRESSURE TURB. RTR. FWD | 1 | |
| lC6l89 | ADAPTER, PRESSURE RUBE ADAPTER | 1 | |
| lC6l93 | FIXTURE SET, MACHINING - FRONT COMPRESSOR STATOR | 1 | |
| lC8039 | FIXTURE, RAISE & SUPPORT- UPPER COMPRESSOR CASE | 1 | |
| lC8059 | STAND, VERTICAL- HIGH PRESS TURB ROTOR-EMC | 1 | |
| 08-4049-0013 | ENGINE COMPRESSOR WASHER | 12 | |
| 460004330/259 | PRESS PAD | 5 | |
| 460004330/2 | PRESS PAD | 3 | |
| 460004330/66 | PRESS PAD | 5 | |
| 4728-1 | DIGITAL PRESSURE INDICATOR | 1 | |
| 65-90305-25 | APU LOW PRESSURE FUEL FILTER | 8 | |
| AVI300DTGK | WHEEL PRESSURE GAUGE | 1 | |
| B90-9911-00 | ACCESSORIES OF PNEUMATIC AND UNITS PRESSURE CHECKING DEVICE | 1 | |
| C27038-6 | PIN - LOCKOUT, L.E. CRUISE DEPRESSURIZATION VALVE | 22 | |
| DLT 0407 | AIR COMPRESSOR | 1 | |
| DLT01MAPM1012 | PRESSURE GAUGE 0-15000 PSI | 5 | |
| F72928-58 | REGULATOR - AIR PRESSURE, ELEVATOR FEEL COMPUTER | 11 | |
| F72977-62 | GAUGE EQUIPMENT - HYDRAULIC BRAKE SYSTEM PRESSURE CHECKING | 16 | |
| HC-2279 | OLEO PRESSURE GUAGE 0-5000 PSI (TRON AIR) | 4 | |
| HSK6263−1 | HARTWELL DECOMPRESSION LATCH TESTER | 35 | |
| MA-250 | PRESSURE GAUGE | 1 | |
| MA-60 | PRESSURE GAUGE | 1 | |
| PPR2-FNPT6-KN-32W-316L | REGULATOR, PRESSURE 0 - 150 PSIG | 1 | |
| RGTOOLS-64 | PETROL PRESSURE WASHER (3.100 PSI. 2.8, G.P.M) | 1 | |
| Ã?Ã?-3 | INDUCTIVE PRESSURE SENSOR | 2 | |
| Ð?Ð?-3 | Inductive pressure sensor | 2 | |
| А28005-48 | TEST EQPT - LEAK & PRESSURE, APU FUEL LINE SHROUD | 1 | |
| А28005-50 | TEST EQPT - LEAK & PRESSURE, APU FUEL LINE SHROUD | 1 | |
| 3204KTQ1 | TESTER,ENGINE PRESSURE RATIO - AIR DATA, | 1 | |
| 61155-009-010 | BOLT,FITTED,HEXAGONAL,FOR COMPRESSION TO | 1 | |
| 97A21102500000 | BLANK,APU SYSTEM,USED FOR PRESSURIZING A | 3 | |
| 97A28002191000 | PRESSURIZATION EQUIPMENT,APU FUEL FEED S | 5 | |
| 97A32402018000 | PRESSURE GAGE,BRAKE BLOCK HYDRAULIC PRES | 5 | |
| 97A32602403100 | SIMULATOR,TIRE PRESSURE,USED TO TEST TIR | 1 | |
| 98A21203500000 | TOOL,USED FOR PRESSURIZING APU BLEED AIR | 3 | |
| PWA26078 | WRENCH-MAIN OIL PRESS RELIEF VALVE ADJ | 3 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
