| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| PWC37858 | pusher - Puller | 5 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 856A3793 | FIXTURE,PUSHER PULLER-CVT (CALIBRATION) | 1 | |
| (CALIB) PWC54254 | PULLER- PUSHER FUEL NOZZLE TRANSFERT TUBE | 1 | |
| (CALIB) PWC54255 | PULLER- PUSHER FUEL NOZZLE TRANSFERT TUBE | 1 | |
| 11C3154 | PUSHER/PULLER - FAN SPEED SENSOR | 1 | |
| 11C3154G02 | PUSHER/PULLER - FAN SPEED SENSOR | 1 | |
| 18C1321 | PUSHER/PULLER TOOL - FAN BLISK | 1 | |
| 18C1328 | PUSHER/PULLER - BOOSTER | 1 | |
| 191102 | PULLER-PUSHER_[191102] | 1 | |
| 21C8037G05 | PUSHER-PULLER | 1 | |
| 2C14199G05 | FIXTURE, LIFT , PULLER/PUSHER - HPT HORIZONTAL | 1 | |
| 2C5641G01 | PULLER/PUSHER - CARBON SEAL RUNNER | 1 | |
| 2C81118G01 | PUSHER, PULLER - FAN DISK ASSEMBLY | 1 | |
| 2C81128G01 | PUSHER/PULLER - HPT ROTOR (ROTOR PUSHER/PULLER) | 1 | |
| 2C81408G02 | PUSHER/PULLER - HPT ROTOR | 1 | |
| 2C81408G03 | PUSHER/PULLER - HPT ROTOR | 1 | |
| 6795614 | PULLER & PUSHER-IDLER GEAR SUPPORT SHAFT | 2 | |
| 6797059 | PUSHER & PULLER - ALTERNATOR | 1 | |
| 6797060 | PUSHER & PULLER - HYDRAULIC | 1 | |
| 6F6220G05631 | PULLER-PUSHER, TENSION LINK BUSHINGS REMOVAL-INSTALLATION | 1 | |
| 856A2389G03 | TOOL SET, PUSHER/PULLER - STAGE 3 LPT DISK BUSHINGS (PUSHER/PULLER TOOL) | 1 | |
| 856A2399 | ROD, PUSHER/PULLER - RADIAL DRIVE SHAFT | 1 | |
| 856A2504 | PUSHER PULLER - FERRULE VBV FLEX SHAT | 1 | |
| 856A2504G01 | PUSHER/PULLER, FERRULE -VBV FLEXIBLE SHAFT (FERRULE) | 7 | |
| 856A2588G01 | PULLER/PUSHER - OIL DISTRIBUTOR | 1 | |
| 856A2632 | TOOL-PULLER/PUSHER | 6 | |
| 856A2632G01 | TOOL-PULLER/PUSHER | 23 | |
| 856A2820G01 | FIXTURE, PUSHER/PULLER - MODULE 1 AN | 2 | |
| 856A2946G01 | FIXTURE, PUSHER/PULLER - MODULE 1 AND MAJOR MODULE 3 (PUSHER/PULLER FIXTURE) | 12 | |
| 856A2961G01 | PUSHER/PULLER - CFM56-7 SEALOL AND MAGNETIC SEALS | 2 | |
| 856A2961G02 | PUSHER/PULLER- CFM56 | 8 | |
| 856A2961G02 | PUSHER/PULLER - CFM56-7 SEALOL AND MAGNETIC SEALS | 8 | |
| 856A2961G03 | Pusher/Puller- CFM56-7 Sealol and Magnetic Seals | 14 | |
| 856A2983G02 | FIXTURE, PUSHER/PULLER - LPT | 4 | |
| 856A2991G01 | BEAM PUSHER / PULLER-ADAPTATION | 5 | |
| 856A3072 | PUSHER/PULLER - RADIAL DRIVE SHAFT WASHER | 1 | |
| 856A3072G01 | PUSHER/PULLER - RADIAL DRIVE SHAFT WASHER | 1 | |
| 856A3279 | PUSHER/PULLER - LPT DISKS SLEEVES (PUSHER/PULLER) | 1 | |
| 856A3279G02 | PUSHER/PULLER-LPT DISKS | 2 | |
| 856A3279G03 | PUSHER/PULLER - LPT DISK SLEEVES | 7 | |
| 856A3504 | FIXTURE, PUSHER/PULLER - MODULE 1 AND MAJOR MODULE 1 | 1 | |
| 856A3504 G03 | FIXTURE, PUSHER/PULLER - MODULE 1 AND MAJOR MODULE 3 (PUSHER/PULLER FIXTURE) | 15 | |
| 856A3504G02 | Fixture - Pusher/Puller | 6 | |
| 856A3504G03 | Fixture, Pusher/Puller - Module 1 and Major Module 3 (pusher/puller fixture) | 15 | |
| 856A3524G01 | FIXTURE - PUSHER/PULLER CVT (FIXTURE) | 14 | |
| 856A3576G01 | PUSHER/PULLER - AGB SEALS | 21 | |
| 856A3576G02 | PUSHER/PULLER - AGB SEALS | 17 | |
| 856A3576G03 | PUSHER/PULLER - AGB SEALS | 4 | |
| 856A3617G01 | PUSHER/PULLER - LUBE UNIT MAGNETIC | 32 | |
| 856A3617G02 | PUSHER/PULLER - LUBE UNIT MAGNETIC PLUG | 1 | |
| 856A3703G01 | PUSHER/PULLER - RADIAL DRIVE SHAFT | 12 | |
| 856A3708 | PUSHER/PULLER - RADIAL DRIVE SHAFT | 1 | |
| 856A3708G01 | PUSHER/PULLER - RADIAL DRIVE SHAFT | 10 | |
| 856A3790 | PUSHER/PULLER FIXTURE - LPT REAR DUCT | 1 | |
| 856A3790G01 | PUSHER/PULLER FIXTURE - LPT REAR | 7 | |
| 856A3793 | FIXTURE,PUSHER PULLER-CVT | 3 | |
| 856A3793G01 | PUSHER/PULLER FIXTURE - CVT | 15 | |
| 856A3793G02 | Fixture - Pusher/Puller CVT (Fixture) | 15 | |
| 856A3793G03 | PUSHER/PULLER FIXTURE - CVT | 3 | |
| 856A3793G04 | PUSHER/PULLER FIXTURE - CVT | 3 | |
| 856A3918G02 | PULLER/PUSHER FIXTURE - N°2 ROLLER BRG OUTER RACE | 2 | |
| 856A3918G03 | PULLER/PUSHER FIXTURE - N2 ROLLER | 4 | |
| 956A6201 | PUSHER/PULLER - ROTATING SEALS | 1 | |
| 956A6201G01 | PUSHER/PULLER - ROTATING SEALS | 6 | |
| 956A6202 | PUSHER/PULLER SET - DAMPER BEARINGS | 1 | |
| 956A6205 | PUSHER/PULLER SET - DAMPER CENTRAL | 1 | |
| 956A6249 | PUSHER/PULLER - OPT RESTRICTOR | 1 | |
| 956A6286 | PUSHER/PULLER - BAFFLE | 1 | |
| 956A6292 | PUSHER/PULLER - BAFFLE | 1 | |
| 956A6481 | SET, PUSHER/PULLER-LPT DISK BUSHINGS | 1 | |
| 956A6486 | SET - PUSHER PULLER - LPT DISK BUSHINGS | 1 | |
| 956A6990G01 | PUSHER/PULLER - ROTATING SEALS | 2 | |
| 956A8043G01 | Tool-Pusher/Puller-Radial Shaft | 1 | |
| 9C1591G02 | Pusher/Puller Set - Install/Remove, Actuating Ring Bushings | 1 | |
| AGE70496 | SNUBBER PUSHER/PULLER - APU500 - Pratt & Whitney Aeropower / Pratt & Whitney Canada | 6 | |
| IAE1F10412 | PUSHER-PULLER,R/I | 11 | |
| IAE1J12004 | PULLER-PUSHER | 13 | |
| PWA 25564 | PUSHER-PULLER | 2 | |
| PWA 27500 | PUSHER-PULLER | 4 | |
| PWA104170 | PUSHER / PULLER -PIN, GEARBOX MOUNT/OIL TANK MOUNT | 1 | |
| PWA25095 | PUSHER/PULLER - ENG ASSY TURB COUPLING_[PWA25095] | 2 | |
| PWA25228 | PUSHER/PULLER - AGB SPUR & BEVEL G/SFT_[PWA25228] | 2 | |
| PWA25273E | PUSHER/PULLER - HPT REM/INST_[PWA25273E] | 1 | |
| PWA25564 | PUSHER/PULLER - MGB BRACKETS BRG REM_[PWA25564] | 2 | |
| PWA27500 | PUSHER-PULLER GEARBOX CSD TRANSFER TUBE | 4 | |
| PWA29446 | PULLER-PUSHER HYD COMPRESSOR ROTOR 1ST | 1 | |
| PWA45520 | PUSHER / PULLER HYD (PWA45520-24 & PWA45520-5) | 3 | |
| PWA80991 | PUSHER / PULLER -PIN, GEARBOX MOUNT/OIL TANK MOUNT | 1 | |
| PWC30373 | Pusher/Puller - Pratt & Whitney Canada | 6 | |
| PWC30810 | PUSHER/PULLER - OUTPUT SHAFT OIL SEAL | 6 | |
| PWC30810 REV E. | PUSHER/PULLER - OUTPUT SHAFT OIL SEAL | 1 | |
| PWC34336 | PULLER-PUSHER, TUBE | 1 | |
| PWC37568 | PUSHER - PRATT & WHI, PULLER | 2 | |
| PWC37858 | PULLER - PUSHER | 5 | |
| PWC43167 | Puller-Pusher | 2 | |
| PWC52357 | PULLER - PUSHER | 2 | |
| PWC54028 | A PULLER/PUSHER - ASSEMBLY TOOL | 2 | |
| PWC54028-A | A PULLER/PUSHER - ASSEMBLY TOOL | 1 | |
| PWC54246 | PULLER - PUSHER | 7 | |
| PWC54254 | PULLER PUSHER - Pratt & Whitney Canada | 16 | |
| PWC54254-1 | PULLER - PUSHER | 1 | |
| PWC54254-5 | PULLER/PUSHER-TIP | 4 | |
| PWC54254-AB | PULLER-PUSHER/HANDLE WLDMT | 1 | |
| PWC54254-ST | PULLER-PUSHER | 1 | |
| PWC54254-TIP | PULLER/PUSHER-TIP | 4 | |
| PWC54255 | PULLER PUSHER - Pratt & Whitney Canada | 13 | |
| PWC54255-1 | PULLER - PUSHER | 1 | |
| PWC60461 | Pusher-Puller | 1 | |
| PWC61333 | Puller / pusher - Pratt & Whitney Canada | 3 | |
| PWC61474 | PUSHER/PULLER-SPACER | 1 | |
| PWC62427 | PUSHER/ PULLER FACE - Pratt & Whitney Canada | 4 | |
| PWC64180 | Pusher / puller - Pratt & Whitney Canada | 2 | |
| PWC67723 | PUSHER-PULLER | 3 | |
| PWC69178 | PULLER / PUSHER H-3.6 | 1 | |
| PWC70932 | PULLER - PUSHER | 5 | |
| S10404 | HAMMER, PULLER-PUSHER-KNOCKER TYPE | 1 | |
| SPL-11935 | PUSHER/PULLER - CFM56-7 SEALOL AND MAGNETIC SEALS | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
