| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 856A-3504-G02 | Pusher / Puller | 6 | |
| 856A2961G02 | PUSHER / PULLER | 8 | |
| 856A2961G03 | PUSHER / PULLER | 14 | |
| 856A3708G01 | Pusher / Puller | 10 | |
| PWC34319 | PUSHER / PULLER | 1 | |
| PWC61333 | PUSHER / PULLER | 3 | |
| PWC61351 | Pusher / puller | 1 | |
| PWC61933 | PUSHER / PULLER | 2 | |
| PWC64180 | Pusher / puller | 2 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) PWC61333 | PUSHER/ PULLER | 1 | |
| 11C3154 | PUSHER/PULLER - FAN SPEED SENSOR | 1 | |
| 11C3154G02 | PUSHER/PULLER - FAN SPEED SENSOR | 1 | |
| 18C1321 | PUSHER/PULLER TOOL - FAN BLISK | 1 | |
| 18C1328 | PUSHER/PULLER - BOOSTER | 1 | |
| 1C9329 | PUSHER/PULLER AFT COUPLING | 1 | |
| 1C9608G01 | PUSHER/PULLER HPT (USED WITH 2C 14199G09) | 1 | |
| 23054788 | Puller / Pusher Blade Track 1st Stage LPT Rotor | 1 | |
| 23054790 | Puller / Pusher, Blade Track 3rd Stage, LPT Rotor | 1 | |
| 2C 14199G09 | PUSHER/PULLER HPTR | 1 | |
| 2C1408G01 | PUSHER/PULLER, HPT ROTOR (ROTOR PUSHER/PULLER) | 1 | |
| 2C14199G05 | FIXTURE, LIFT , PULLER/PUSHER - HPT HORIZONTAL | 1 | |
| 2C14199G09 | PUSHER/PULLER HPTR | 1 | |
| 2C14718G02 | PULLER/PUSHER, AIR TUBES ‐ STAGE 2 HPT | 2 | |
| 2C18008G01 | PUSHER/PULLER, LPT SHAFT, HORZ MAINT ONLY | 1 | |
| 2C5641G01 | PULLER/PUSHER - CARBON SEAL RUNNER | 1 | |
| 2C81118 | PUSHER/PULLER, FAN ROTOR | 1 | |
| 2C81128 | PUSHER/PULLER HPT ROTOR | 1 | |
| 2C81128G01 | PUSHER/PULLER - HPT ROTOR (ROTOR PUSHER/PULLER) | 1 | |
| 2C81408 | PUSHER/PULLER | 1 | |
| 2C81408G01 | PUSHER/PULLER HPT ROTOR | 1 | |
| 2C81408G02 | PUSHER/PULLER − HPT ROTOR | 1 | |
| 2C81408G03 | PUSHER/PULLER - HPT ROTOR | 1 | |
| 2C81537 | PUSHER/PULLER | 1 | |
| 2C81537G01 | PUSHER/PULLER, LPT MODULE | 3 | |
| 31J12220 | PUSHER/PULLER | 1 | |
| 856A1130P12 | PUSHER/PULLER | 10 | |
| 856A2389G03 | TOOL SET, PUSHER/PULLER - STAGE 3 LPT DISK BUSHINGS (PUSHER/PULLER TOOL) | 1 | |
| 856A2399 | ROD, PUSHER/PULLER - RADIAL DRIVE SHAFT | 1 | |
| 856A2399G01 | Rod Pusher / Puller | 1 | |
| 856A2504 G01 | Pusher/Puller Ferrule ‐ VBV Flexible Shaft | 6 | |
| 856A2504G01 | Pusher/Puller | 6 | |
| 856A2588G01 | PULLER/PUSHER - OIL DISTRIBUTOR | 1 | |
| 856A2632 | TOOL-PULLER/PUSHER | 6 | |
| 856A2632G01 | TOOL-PULLER/PUSHER | 23 | |
| 856A2819 | BEAM PUSHER / PULLER ADAPTATION | 1 | |
| 856A2819G01 | BEAM PUSHER / PULLER ADAPTATION | 2 | |
| 856A2820G01 | FIXTURE, PUSHER/PULLER - MODULE 1 AN | 2 | |
| 856A2833 | FIXTURE PULLER/PUSHER | 1 | |
| 856A2833G01 | FIXTURE PULLER/PUSHER | 1 | |
| 856A2834 | BEAM PULLER/PUSHER | 1 | |
| 856A2834G01 | BEAM PULLER/PUSHER | 1 | |
| 856A2835 | ADAPTER PULLER/PUSHER | 1 | |
| 856A2835G01 | ADAPTER PULLER/PUSHER | 1 | |
| 856A2946G01 | FIXTURE, PUSHER/PULLER - MODULE 1 AND MAJOR MODULE 3 (PUSHER/PULLER FIXTURE) | 12 | |
| 856A2961G01 | PUSHER/PULLER - CFM56-7 SEALOL AND MAGNETIC SEALS | 2 | |
| 856A2961G02 | PUSHER/PULLER- CFM56 | 8 | |
| 856A2961G02 | PUSHER/PULLER - CFM56-7 SEALOL AND MAGNETIC SEALS | 8 | |
| 856A2961G03 | Pusher/Puller- CFM56-7 Sealol and Magnetic Seals | 14 | |
| 856A2983 | FIXSTURE PUSHER/PULLER | 1 | |
| 856A2983G02 | FIXTURE, PUSHER/PULLER - LPT | 4 | |
| 856A2990 | BEAM PUSHER/PULLER ADAPTATION | 1 | |
| 856A2990G01 | BEAM PULLER/PUSHER | 3 | |
| 856A2991 | ADAPTER PULLER/PUSHER | 1 | |
| 856A2991G01 | BEAM PUSHER / PULLER ADAPTATION | 5 | |
| 856A2996 | BEAM PUSHER/PULLER ADAPTATION | 1 | |
| 856A2996G01 | BEAM PUSHER / PULLER ADAPTATION | 3 | |
| 856A3072 | PUSHER/PULLER - RADIAL DRIVE SHAFT WASHER | 1 | |
| 856A3072G01 | PUSHER/PULLER - RADIAL DRIVE SHAFT WASHER | 1 | |
| 856A3279 | PUSHER/PULLER, LPT | 1 | |
| 856A3279 G02 | Pusher/Puller ‐ LPT Disks Sleeves | 2 | |
| 856A3279G02 | PUSHER/PULLER LPT DISK SLEEVES | 2 | |
| 856A3279G03 | PUSHER/PULLER - LPT DISK SLEEVES | 7 | |
| 856A3504 | FIXTURE, PUSHER/PULLER MODULE | 1 | |
| 856A3504 G02 | Fixture Pusher/Puller ‐ Module 1 & Major Module | 6 | |
| 856A3504 G03 | FIXTURE, PUSHER/PULLER - MODULE 1 AND MAJOR MODULE 3 (PUSHER/PULLER FIXTURE) | 15 | |
| 856A3504G01 | FIXTURE, PUSHER/PULLER MODULE | 1 | |
| 856A3504G02 | FIXTURE, PUSHER/PULLER MODULE | 6 | |
| 856A3504G03 | FIXTURE, PUSHER/PULLER MODULE | 15 | |
| 856A3511G02 | PUSHER/PULLER | 7 | |
| 856A3524G01 | FIXTURE - PUSHER/PULLER CVT (FIXTURE) | 14 | |
| 856A3576G01 | PUSHER/PULLER - AGB SEALS | 21 | |
| 856A3576G01 | PUSHER/PULLER | 21 | |
| 856A3576G02 | PUSHER/PULLER - AGB SEALS | 17 | |
| 856A3576G03 | PUSHER/PULLER - AGB SEALS | 4 | |
| 856A3617G01 | PUSHER/PULLER - LUBE UNIT MAGNETIC | 32 | |
| 856A3617G02 | PUSHER/PULLER - LUBE UNIT MAGNETIC PLUG | 1 | |
| 856A3703G01 | PUSHER/PULLER - RADIAL DRIVE SHAFT | 12 | |
| 856A3708 | PUSHER/PULLER - RADIAL DRIVE SHAFT | 1 | |
| 856A3708G01 | PUSHER/PULLER - RADIAL DRIVE SHAFT | 10 | |
| 856A3788G02 | BEAM PUSHER / PULLER ADAPTATION | 7 | |
| 856A3790 | PUSHER/PULLER FIXTURE - LPT REAR DUCT | 1 | |
| 856A3790G01 | PUSHER/PULLER FIXTURE - LPT REAR | 7 | |
| 856A3793 | FIXTURE, PUSHER / PULLER - CVT | 3 | |
| 856A3793G01 | PUSHER/PULLER FIXTURE - CVT | 15 | |
| 856A3793G01 | FIXTURE PUSHER/PULLER TUBE CENTER VENT | 15 | |
| 856A3793G02 | Fixture - Pusher/Puller CVT (Fixture) | 15 | |
| 856A3793G02 | FIXTURE PUSHER/PULLER TUBE CENTER VENT | 15 | |
| 856A3793G03 | PUSHER/PULLER FIXTURE - CVT | 3 | |
| 856A3793G04 | PUSHER/PULLER FIXTURE - CVT | 3 | |
| 856A3907P01 | PUSHER/PULLER – CVT | 2 | |
| 856A3918G02 | PULLER/PUSHER FIXTURE - N°2 ROLLER BRG OUTER RACE | 2 | |
| 856A3918G03 | PULLER/PUSHER FIXTURE - N2 ROLLER | 4 | |
| 8C2511 | FIXTURE, PUSHER/PULLER CARBON SEAL NO. 1 BEARING | 1 | |
| 956A6201 | PUSHER/PULLER - ROTATING SEALS | 1 | |
| 956A6201G01 | PUSHER/PULLER - ROTATING SEALS | 6 | |
| 956A6202 | PUSHER/PULLER SET - DAMPER BEARINGS | 1 | |
| 956A6205 | PUSHER/PULLER SET - DAMPER CENTRAL | 1 | |
| 956A6249 | PUSHER/PULLER - OPT RESTRICTOR | 1 | |
| 956A6286 | PUSHER/PULLER - BAFFLE | 1 | |
| 956A6292 | PUSHER/PULLER - BAFFLE | 1 | |
| 956A6481 | SET, PUSHER/PULLER-LPT DISK BUSHINGS | 1 | |
| 956A6990G01 | PUSHER/PULLER - ROTATING SEALS | 2 | |
| 956A8043G01 | Tool-Pusher/Puller-Radial Shaft | 1 | |
| 9C1591G02 | Pusher/Puller Set - Install/Remove, Actuating Ring Bushings | 1 | |
| AB72001-SK7 | PULLER/PUSHER, FAN BLADE ROTOR INST/REM. | 1 | |
| AGE70496 | SNUBBER PUSHER/PULLER | 6 | |
| AGE70498-06 | SNUBBER PUSHER/PULLER | 1 | |
| AGE70498-07 | SNUBBER PUSHER/PULLER | 1 | |
| H21968 | PULLER/ PUSHER | 12 | |
| HW52870 | PULLER/PUSHER CTR BEARING BOX 7 | 1 | |
| IAE 1J12220 | HYDRAULIC PUSHER/PULLER | 6 | |
| IAE1F10412 | PUSHER-PULLER,R/I | 11 | |
| IAE1J12004 | Puller/Pusher | 13 | |
| IAE1J12139 | BOLT, PUSHER/PULLER | 1 | |
| IAE1J12220 | PUSHER/PULLER | 6 | |
| IAE1J12270 | PUSHER / PULLER HYDRAULIC | 2 | |
| IAE1J12478 | PUSHER/PULLER, HYDRAULIC | 1 | |
| IAE1M14007 | PULLER/PUSHER, HYDRAULIC | 1 | |
| IAE1M14012 | PULLER/PUSHER, HYDRAULIC | 1 | |
| IAE1P16036 | PUSHER/PULLER HYDRA | 3 | |
| PWA 80607 | PUSHER/PULLER, HYDRAULIC | 1 | |
| PWA 81448 | PUSHER/PULLER | 1 | |
| PWA101067 | PUSHER/PULLER | 1 | |
| PWA104170 | PUSHER / PULLER -PIN, GEARBOX MOUNT/OIL TANK MOUNT | 1 | |
| PWA25095 | PUSHER/PULLER - ENG ASSY TURB COUPLING_[PWA25095] | 2 | |
| PWA25228 | PUSHER/PULLER - AGB SPUR & BEVEL G/SFT_[PWA25228] | 2 | |
| PWA25273E | PUSHER/PULLER - HPT REM/INST_[PWA25273E] | 1 | |
| PWA25564 | PUSHER/PULLER - MGB BRACKETS BRG REM_[PWA25564] | 2 | |
| PWA27500 | PUSHER,PULLER - CSD TRANSFER TUBE_155X80X65MM/0.68KG_[PWA27500] | 4 | |
| PWA28028 | PUSHER/PULLER_[PWA28028] | 2 | |
| PWA29446 | PULLER,PUSHER - HYD COMP ROTOR 1ST_DIA.102X381MM/4.0KG_[PWA29446] | 1 | |
| PWA3572 | PULLER/PUSHER | 1 | |
| PWA45520 | Pusher/Puller | 3 | |
| PWA76132 | PUSHER / PULLER_[PWA76132] | 2 | |
| PWA80330 | PUSHER/PULLER,HYDRAULIC | 1 | |
| PWA80330-14 | PULLER / PUSHER, HYDRAULIC | 1 | |
| PWA80428 | PULLER/PUSHER,JACKSCREW | 1 | |
| PWA80607 | PUSHER/PULLER,HYDRAULIC | 1 | |
| PWA80607-1 | PULLER / PUSHER | 1 | |
| PWA80607-23 | PULLER / PUSHER | 1 | |
| PWA80607-27 | PULLER / PUSHER | 1 | |
| PWA80607-9 | PULLER / PUSHER | 1 | |
| PWA80991 | PUSHER / PULLER -PIN, GEARBOX MOUNT/OIL TANK MOUNT | 1 | |
| PWA8137 | PUSHER/PULLER | 1 | |
| PWA81448 | PUSHER/PULLER | 1 | |
| PWA81448-6 | PULLER / PUSHER | 1 | |
| PWC30046-54 | PULLER/PUSHER | 14 | |
| PWC30128-14 | PUSHER/PULLER | 12 | |
| PWC30373 | Pusher/Puller | 6 | |
| PWC30810 | PULLER / PUSHER | 6 | |
| PWC30810 REV E. | PUSHER/PULLER - OUTPUT SHAFT OIL SEAL | 1 | |
| PWC32366 | PUSHER/PULLER | 12 | |
| PWC34336 | PULLER / PUSHER | 1 | |
| PWC36500 | PULLER/PUSHER | 1 | |
| PWC37303 | PUSHER/PULLER | 8 | |
| PWC37858 | PULLER/PUSHER | 5 | |
| PWC42020 | PULLER/PUSHER CT disk | 1 | |
| PWC52357 | PUSHER/PULLER, FERRULE (POST-SB7452) | 2 | |
| PWC54028 | A PULLER/PUSHER - ASSEMBLY TOOL | 2 | |
| PWC54028-A | A PULLER/PUSHER - ASSEMBLY TOOL | 1 | |
| PWC54246 | PULLER / PUSHER | 7 | |
| PWC54254 | PULLER/PUSHER | 16 | |
| PWC54254-5 | PULLER/PUSHER-TIP | 4 | |
| PWC54254-AB | PULLER-PUSHER/HANDLE WLDMT | 1 | |
| PWC54254-TIP | PULLER/PUSHER-TIP | 4 | |
| PWC54255 | PULLER/PUSHER (V59603) | 13 | |
| PWC57012 | PULLER/PUSHER | 1 | |
| PWC60818 | PULLER/PUSHER | 1 | |
| PWC61333 | Pusher/ puller | 3 | |
| PWC61340 | PW308 PULLER/PUSHER | 2 | |
| PWC61474 | PUSHER/PULLER-SPACER | 1 | |
| PWC62280 | Pusher/ puller | 4 | |
| PWC62427 | Pusher/ puller | 4 | |
| PWC63045 | Pusher/ puller | 3 | |
| PWC64180 | Pusher / puller - Pratt & Whitney Canada | 2 | |
| PWC65990 | PULLER/PUSHER | 3 | |
| PWC69178 | PULLER / PUSHER H-3.6 | 1 | |
| RB PWC30810 | Puller / Pusher | 2 | |
| RB PWC70823 | Puller / Pusher | 1 | |
| RB PWC71026 | Puller / Pusher Adapter | 1 | |
| RB6795614 | Puller/Pusher Idler Gear Support Shaft | 2 | |
| SPL-11935 | PUSHER/PULLER - CFM56-7 SEALOL AND MAGNETIC SEALS | 1 | |
| SPL-7867 | SNUBBER PUSHER/PULLER | 1 | |
| T007946 (856A3576G02) | NG Seal & Magnetic Pusher/Puller | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
