| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| CG240H | Pullers | 1 | |
| PWA 12400 | PULLERS | 1 | |
| PWA 26563 | PULLERS | 1 | |
| PWA 27732 | PULLERS | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 1008804 | TOOL KIT, A/C MAINTENANCE #2 (SCAALE/PULLERS) (UH-60) | 2 | |
| 23068494 | PULLER, LOCATING TURBINE VANE PLUG. (SUPERSEDES PULLERS 23060636 AND 23054759). | 1 | |
| 2C81949 | SET - PULLERS - CARBON SEALS - AGB | 1 | |
| 2C81949G01 | SET PULLERS CARBON SEAL | 2 | |
| 2C81950 | SET PULLERS - MATING RINGS - AGB | 1 | |
| 2C81950G01 | SET PULLERS MATING RING | 3 | |
| 2C81959G01 | PULLERS-AXIS A, B,C & AGB STRAINERS | 1 | |
| 71040001 | 11400/1 - 8-12mm INTERNAL PULLERS | 1 | |
| 71040003 | INTERNAL PULLERS | 1 | |
| 71040005 | 11400/4a 25-30mm INTERNAL PULLERS | 1 | |
| 71040007 | INTERNAL PULLERS | 1 | |
| 71040008 | 11400/7 - 45-55MM INTERNAL PULLERS | 1 | |
| 71040009 | 11400/8 - INTERNAL PULLERS 55-70mm | 1 | |
| 71040014 | INTERNAL PULLERS | 1 | |
| 71050201 | EXTENSIONS FOR PULLERS | 1 | |
| 71050202 | EXTENSIONS FOR PULLERS | 1 | |
| 71050203 | EXTENSIONS FOR PULLERS | 1 | |
| 71160018 | 11060N-8-INTERNAL PULLERS | 1 | |
| 71190011 | 11055N-1-STANDARD PULLERS TWO-ARMED W | 1 | |
| 71190012 | 11055N-2-STANDARD PULLERS TWO-ARMED W | 1 | |
| 71190013 | 11055N-3-STANDARD PULLERS TWO-ARMED W | 1 | |
| 856A1198G01 | HPT ROTOR AFT SHAFT PULLERS | 8 | |
| 856A1838G01 | FWD SHAFT HPT PULLERS | 4 | |
| 856A2337G01 | NO 1 BEARING INNER RACE PULLERS | 8 | |
| 856A2374G01 | NO 5 BEARING INNER RACE PULLERS | 4 | |
| 856A2749 | TOOL SET, PAD PULLERS - TGB AND RADIAL DRIVE SHAFT (TOOL SET) | 1 | |
| 856A2749G03 | TOOL SET, PAD PULLERS - TGB AND RADIAL DRIVE SHAFT (TOOL SET) | 3 | |
| 856A2772G01 | PULLERS - TURBINE REAR FRAME | 9 | |
| 856A3443G04 | PULLERS NO 5 BEARING OUTER RACE. | 5 | |
| 856A3567 | TOOL SET PADS PULLERS AGB | 1 | |
| 856A3567G03 | TOOL SET PADS PULLERS AGB | 1 | |
| 856A3707G07 | PULLERS FAN BLADE SPACERS | 9 | |
| 856A3789G01 | PULLERS REAR DUCT | 6 | |
| AB72001-VW7 | SET, BOLT-PULLERS | 1 | |
| ADP265-TWP | EYELET TWIST PULLERS (5 EACH) | 1 | |
| CBMG-8-0-N | Wear Gage for 300 and 350 Series Pullers | 5 | |
| CG2400B | PULLERS SET MEDIUM-DUTY | 1 | |
| CG2510BSBHY | PULLERS SET HEAVY-DUTY | 1 | |
| COTTER PIN PULLERS | COTTER PIN PULLERS | 1 | |
| F70293-1 | Pullerset | 1 | |
| FTMP-12 | Midget Pullers | 1 | |
| FTMP-7 | Midget Pullers | 1 | |
| FTMP-8 | Midget Pullers | 1 | |
| IAE1J12125 | Nose Cone Pullers | 12 | |
| IAE1J12188 | SET, BOLT-PULLERS | 24 | |
| LB/MB-CBC-A2 | Puller Unit: LB-XX Allows MB Nosecap to fit LB Pullers | 1 | |
| MB/BB-CBC-1 | Puller Unit: MB-XX MB Pullers | 1 | |
| PN2XS8-02 | ENGINE TOOLS PULLERS | 1 | |
| PWA 28170 | FIXTURE ADAPTER PULLERS | 2 | |
| PWC63005 | PULLERSHRD HSG FR. FIX | 1 | |
| SSO0667214 | PULLERS FOR DISMANTLING-MOUNTING OF MR1-3 COMPRESSOR BEARINGS | 1 | |
| SWE 192024 | #1 BRG PULLERS | 1 | |
| SWE 192071 | #3 BRG PULLERS | 1 | |
| WCI-300-PDW-40/43 | Pilot Wear Gage for 300 and 350 Series Pullers | 1 | |
| WCI-300-PDW-80/143 | Pilot Wear Gage for 300 and 350 Series Pullers | 1 | |
| WCI-300EN-04-0 | Extension Nosecap for 300 and 350 Series Pullers | 1 | |
| WCI-300EN-04-1 | Extension Nosecap for 300 and 350 Series Pullers | 1 | |
| WCI-300EN-04-2 | Extension Nosecap for 300 and 350 Series Pullers | 1 | |
| WCI-300EN-04-3 | Extension Nosecap for 300 and 350 Series Pullers | 1 | |
| WCI-300EN-06-0 | Extension Nosecap for 300 and 350 Series Pullers | 1 | |
| WCI-300EN-06-1 | Extension Nosecap for 300 and 350 Series Pullers | 1 | |
| WCI-300EN-06-2 | Extension Nosecap for 300 and 350 Series Pullers | 1 | |
| WCI-300EN-06-3 | Extension Nosecap for 300 and 350 Series Pullers | 1 | |
| WCI-300EN-08-0 | Extension Nosecap for 300 and 350 Series Pullers | 1 | |
| WCI-300EN-08-1 | Extension Nosecap for 300 and 350 Series Pullers | 1 | |
| WCI-300EN-08-2 | Extension Nosecap for 300 and 350 Series Pullers | 1 | |
| WCI-300EN-08-3 | Extension Nosecap for 300 and 350 Series Pullers | 1 | |
| WCI-300EN-10-0 | Extension Nosecap for 300 and 350 Series Pullers | 1 | |
| WCI-300EN-10-1 | Extension Nosecap for 300 and 350 Series Pullers | 1 | |
| WCI-300EN-10-2 | Extension Nosecap for 300 and 350 Series Pullers | 1 | |
| WCI-300EN-10-3 | Extension Nosecap for 300 and 350 Series Pullers | 1 | |
| WCI-300EN-12-0 | Extension Nosecap for 300 and 350 Series Pullers | 1 | |
| WCI-300EN-14-0 | Extension Nosecap for 300 and 350 Series Pullers | 1 | |
| WCI-300N-04-0 | Flush Nosecap for 300 and 350 Series Pullers | 1 | |
| WCI-300N-04-1 | Flush Nosecap for 300 and 350 Series Pullers | 1 | |
| WCI-300N-04-2 | Flush Nosecap for 300 and 350 Series Pullers | 1 | |
| WCI-300N-04-3 | Flush Nosecap for 300 and 350 Series Pullers | 1 | |
| WCI-300N-06-0 | Flush Nosecap for 300 and 350 Series Pullers | 1 | |
| WCI-300N-06-1 | Flush Nosecap for 300 and 350 Series Pullers | 1 | |
| WCI-300N-06-2 | Flush Nosecap for 300 and 350 Series Pullers | 1 | |
| WCI-300N-06-3 | Flush Nosecap for 300 and 350 Series Pullers | 1 | |
| WCI-300N-08-0 | Flush Nosecap for 300 and 350 Series Pullers | 1 | |
| WCI-300N-08-1 | Flush Nosecap for 300 and 350 Series Pullers | 1 | |
| WCI-300N-08-2 | Flush Nosecap for 300 and 350 Series Pullers | 1 | |
| WCI-300N-08-3 | Flush Nosecap for 300 and 350 Series Pullers | 1 | |
| WCI-300N-10-0 | Flush Nosecap for 300 and 350 Series Pullers | 1 | |
| WCI-300N-10-1 | Flush Nosecap for 300 and 350 Series Pullers | 1 | |
| WCI-300N-10-2 | Flush Nosecap for 300 and 350 Series Pullers | 1 | |
| WCI-300N-10-3 | Flush Nosecap for 300 and 350 Series Pullers | 1 | |
| WCI-300N-12-0 | Flush Nosecap for 300 and 350 Series Pullers | 1 | |
| WCI-300N-14-0 | Flush Nosecap for 300 and 350 Series Pullers | 1 | |
| WCI-CBGM#-04-0 | Combination Gage for 300 and 350 Series Pullers | 1 | |
| WCI-CBGM#-04-1 | Combination Gage for 300 and 350 Series Pullers | 1 | |
| WCI-CBGM#-04-2 | Combination Gage for 300 and 350 Series Pullers | 1 | |
| WCI-CBGM#-04-3 | Combination Gage for 300 and 350 Series Pullers | 1 | |
| WCI-CBGM#-06-0 | Combination Gage for 300 and 350 Series Pullers | 1 | |
| WCI-CBGM#-06-1 | Combination Gage for 300 and 350 Series Pullers | 1 | |
| WCI-CBGM#-06-2 | Combination Gage for 300 and 350 Series Pullers | 1 | |
| WCI-CBGM#-06-3 | Combination Gage for 300 and 350 Series Pullers | 1 | |
| WCI-CBGM#-08-0 | Combination Gage for 300 and 350 Series Pullers | 1 | |
| WCI-CBGM#-08-1 | Combination Gage for 300 and 350 Series Pullers | 1 | |
| WCI-CBGM#-08-2 | Combination Gage for 300 and 350 Series Pullers | 1 | |
| WCI-CBGM#-08-3 | Combination Gage for 300 and 350 Series Pullers | 1 | |
| WCI-CBGM#-10-0 | Combination Gage for 300 and 350 Series Pullers | 1 | |
| WCI-CBGM#-10-1 | Combination Gage for 300 and 350 Series Pullers | 1 | |
| WCI-CBGM#-10-2 | Combination Gage for 300 and 350 Series Pullers | 1 | |
| WCI-CBGM#-10-3 | Combination Gage for 300 and 350 Series Pullers | 1 | |
| WCI-CBGM#-12-0 | Combination Gage for 300 and 350 Series Pullers | 1 | |
| WCI-CBGM#-14-0 | Combination Gage for 300 and 350 Series Pullers | 1 | |
| WCI-HP-20 | Hand Pullers | 2 | |
| WCI-IP-40/43 | Inspection Pin for 300 and 350 Series Pullers | 1 | |
| WCI-IP-60/63 | Inspection Pin for 300 and 350 Series Pullers | 1 | |
| WCI-IP-80/143 | Inspection Pin for 300 and 350 Series Pullers | 1 | |
| WCI-MP | Miniature Pullers | 1 | |
| WCI-MPH | Miniature Pullers | 1 | |
| WCI-WG-04-0 | Wear Gage for 300 and 350 Series Pullers | 1 | |
| WCI-WG-04-1 | Wear Gage for 300 and 350 Series Pullers | 1 | |
| WCI-WG-04-2 | Wear Gage for 300 and 350 Series Pullers | 1 | |
| WCI-WG-04-3 | Wear Gage for 300 and 350 Series Pullers | 1 | |
| WCI-WG-06-0 | Wear Gage for 300 and 350 Series Pullers | 1 | |
| WCI-WG-06-1 | Wear Gage for 300 and 350 Series Pullers | 1 | |
| WCI-WG-06-2 | Wear Gage for 300 and 350 Series Pullers | 1 | |
| WCI-WG-06-3 | Wear Gage for 300 and 350 Series Pullers | 1 | |
| WCI-WG-08-0 | Wear Gage for 300 and 350 Series Pullers | 1 | |
| WCI-WG-08-1 | Wear Gage for 300 and 350 Series Pullers | 1 | |
| WCI-WG-08-2 | Wear Gage for 300 and 350 Series Pullers | 1 | |
| WCI-WG-08-3 | Wear Gage for 300 and 350 Series Pullers | 1 | |
| WCI-WG-10-1 | Wear Gage for 300 and 350 Series Pullers | 1 | |
| WCI-WG-10-2 | Wear Gage for 300 and 350 Series Pullers | 1 | |
| WCI-WG-10-3 | Wear Gage for 300 and 350 Series Pullers | 1 | |
| WCI-WG-12-0 | Wear Gage for 300 and 350 Series Pullers | 1 | |
| WCI-WG-14-0 | Wear Gage for 300 and 350 Series Pullers | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
