| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) PWC37651 | PULLER COVER | 1 | |
| PWC32123 | PULLER COVER | 1 | |
| PWC34522 | PULLER COVER | 8 | |
| PWC34532 | PULLER COVER | 4 | |
| PWC37159 | Puller Cover | 5 | |
| PWC37651 | PULLER COVER | 14 | |
| PWC37821 | Puller Cover | 1 | |
| PWC37851 | PULLER COVER | 8 | |
| PWC41350 | PULLER COVER | 2 | |
| PWC50588 | PULLER COVER | 4 | |
| PWC51261 | PULLER COVER | 3 | |
| PWC64247 | PULLER COVER | 9 | |
| PWC66103 | PULLER COVER | 7 | |
| PWC66512 | PULLER COVER | 5 | |
| PWC70822 | Puller Cover | 1 | |
| PWC71559 | PULLER COVER | 7 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 10C1044G01 | PULLER, COVER - HORIZONTAL DRIVE SHA | 1 | |
| 10C1223G01 | FIXTURE, PULLER - OIL INLET COVER (PULLER FIXTURE) | 1 | |
| 18C8253 | PULLER, PMA COVER | 1 | |
| 2536FAS | ACCESSORY COVER PULLER (IN 0005378) | 1 | |
| 7982 | COVER BEARING PULLER JAWS | 1 | |
| 856A-2791-G01 | Puller, Cover, Lube Unit | 10 | |
| 856A2352G01 | PULLER, OIL COLLECTOR AND AIR HEATER COVER (PULLER) | 2 | |
| 856A2581G01 | PULLER - TGB OIL NOZZLE COVERS | 2 | |
| 856A2632G01 | PULLER-GEARBOX CRANKPAD COVER | 23 | |
| 856A2685 | OIL COVER PULLER | 1 | |
| 856A2685G02 | PULLER ADAPTER - OIL INLET COVER | 1 | |
| 856A2685G03 | PULLER ADAPTER - OIL INLET COVER | 5 | |
| 856A2722 | PULLER COVER FILTER LUBE UN | 1 | |
| 856A2722G01 | PULLER COVER FILTER LUBE UN | 6 | |
| 856A2775 | PULLER OIL COLLECTOR AND AIR HEATER COVER EXTRACTUR | 1 | |
| 856A2775G01 | Puller, Oil Sump Assembly and Air Heater Cover (puller) | 4 | |
| 856A2775G02 | PULLER - OIL SUMP ASSEMBLY AND AIR HEATER COVER | 1 | |
| 856A2791 | PULLER-COVER LUBE UNIT | 1 | |
| 856A2791G01 | PULLER-COVER LUBE | 10 | |
| 856A3419 | ADAPTER, PULLER - OIL INLET COVER | 2 | |
| 856A3419 G01 | Adapter Puller Cover Oil Inlet | 2 | |
| 856A3419 G02 | Adapter Puller ‐ Oil Inlet Cover & Major Module | 22 | |
| 856A3419 REV B | ADAPTER, PULLER COVER OIL INLET | 1 | |
| 856A3419G01 | ADAPTER, PULLER COVER OIL INLET | 2 | |
| 856A3419G02 | ADAPTER, PULLER COVER OIL INLET | 22 | |
| 856A3798G01 | Puller, Oil Sump Assembly and Air Heater Cover (puller Config 3 | 4 | |
| 876489 | PULLER ASSY., FOR BALL BEARING 15*32*8., OIL INLET FLANGE OIL INLET COVER | 1 | |
| 9407M45 | PULLER - COVER-AIR/OIL SEPR. | 1 | |
| 9970-957-199 | ADAPTER, PULLER - COVER, PUMP ASSY | 1 | |
| AGE10159 | STATOR END COVER PULLER ASSEMBLY | 1 | |
| B1359B | PULLER - GEARBOX CRANK DRIVE COVER | 1 | |
| GS13997-1 | COVER PULLER | 2 | |
| PWA108555 | PULLER COVER FAN SHAFT | 1 | |
| PWA211159 | PULLER, GEAR BOX COVER | 4 | |
| PWA211773 | CRANK PAD COVER PULLER | 4 | |
| PWA80044 | PULLER KNOCKER CRANK DRIVE COVER | 2 | |
| PWA80522 | PULLER,MECHANICAL-NO. 5 BEARING COVER | 1 | |
| PWA81351 | PULLER KNOCKER ANGLE GEARBOX LOWER COVER | 1 | |
| PWA85307 | PULLER-JACKSCREW ENG ASSY N.4 BEARING COVER | 9 | |
| PWA85518 | PULLER KNOCKER-ANGLE GEARBOX COVER PLUG | 3 | |
| PWA85768 | PULLER-KNOCKER GEARBOX CRANK PAD COVER | 7 | |
| PWC 37651 | PULLER, COVER | 14 | |
| PWC 38450-3 | PULLER HPT REAR COVER | 1 | |
| PWC30046-70 | PULLER - TORQUEMETER PISTON COVER | 3 | |
| PWC30128-05 | FUEL DRAIN COVER PULLER | 5 | |
| PWC30128-08 | PULLER OIL PUMP INLET COVER | 7 | |
| PWC30128-4V | PULLER T-HANDLE (OIL TANK COVER REMOVAL) | 1 | |
| PWC30128-5 | FUEL DRAIN COVER PULLER | 8 | |
| PWC30128-7 | T-HANDLE PULLER (REMOVAL OF ENGINE OIL TANK COVER) | 3 | |
| PWC30128-7V | PULLER T-HANDLE (OIL TANK COVER REMOVAL) | 1 | |
| PWC30128-8 | PULLER, OIL PUMP INLET COVER | 2 | |
| PWC30863 | NO. 2 BEARING COVER PULLER | 2 | |
| PWC32823 | PULLER BEARING COVER | 6 | |
| PWC34212 | PULLER, COVER | 1 | |
| PWC34418 | PULLER, COVER | 7 | |
| PWC34522 | PULLER COVER - Pratt & Whitney Canada | 8 | |
| PWC34532 | PULLER, COVER | 4 | |
| PWC37523 | PULLER - STARTER GEN. DRIVE COVER (MV7672-5-05) | 1 | |
| PWC37554 | Puller, Oil Pump Inlet Cover | 5 | |
| PWC37566 | Puller, Layshaft Cover | 3 | |
| PWC37651 | Puller Cover Borescope insp Port | 14 | |
| PWC37821 | Puller , Cover | 1 | |
| PWC37823 | Puller, Starter Generator Drive Cover | 8 | |
| PWC37823B | PULLER, STARTER GENERATOR DRIVE COVER | 1 | |
| PWC37851 | Puller, Upper Angle Drive Cover | 8 | |
| PWC38450 | Puller Rear Cover Post SB | 2 | |
| PWC41325 | Puller Cover-Accessory Gearbox | 1 | |
| PWC41325-001 | PULLER-OIL DRAIN COVER, PRATT & WHITNEY CANADA | 2 | |
| PWC41350 | Puller Cover- Load Gearbox | 2 | |
| PWC41416 | Puller Cover cooling fan boroscope | 1 | |
| PWC43172 | PULLER, COVER | 5 | |
| PWC43177 | PULLER, COVER | 3 | |
| PWC51261 | PULLER-COVER ASSY | 3 | |
| PWC54264 | Cover Puller | 1 | |
| PWC54642 | PULLER, AUXILIARY TANK COVER | 2 | |
| PWC55059 | PULLER-LIP SEAL CARRIER FROM COVER | 5 | |
| PWC60418 | PULLER COVER-ROTOR | 1 | |
| PWC62227 | PULLER - REAR COVER | 1 | |
| PWC62278 | puller Cover Packing .750 | 1 | |
| PWC62755 | PULLER-COVER | 1 | |
| PWC62940 | PULLER FRONT COVER | 1 | |
| PWC62976 | PULLER, COVER-FUEL FILTER | 4 | |
| PWC63382 | PULLER-COVER | 1 | |
| PWC64247 | PULLER COVER - Pratt & Whitney Canada | 9 | |
| PWC66103 | PULLER COVER - Pratt & Whitney Canada | 7 | |
| PWC66512 | PULLER COVER - Pratt & Whitney Canada | 5 | |
| PWC70216 | PULLER COVER COLD START VALVE | 2 | |
| PWC70510 | PULLER PRV COVER | 3 | |
| PWC70822 | PULLER COVER PRV | 1 | |
| PWC71072 | PULLER/KNOCKER, COVER | 1 | |
| PWC71167 | Puller, Knocker, Cover | 1 | |
| PWC71559 | PULLER COVER - Pratt & Whitney Canada | 7 | |
| PWC71823 | PULLER, COVER M-6.5 | 5 | |
| SPL-8854 | ADAPTER - PULLER, OIL INLET COVER | 1 | |
| T-00884-1 | Cover Puller | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
