| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| PWC61450 | PULLER 4 | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 856A3308 | PULLER #4 BRG INNER RACE | 1 | |
| (CALIB) MBH0-20 | PULLER PULLER, UNIT HYRAULIC (2354-001 (CALIBRATION) (CALIBRATION) | 1 | |
| 10488-011 | MarathonNorco Aerospace 10488-011 38 Hex Screw NiCad Battery Cell Puller | 3 | |
| 10C1062 | FIXTURE - PULLER - NO. 4 BRG IN | 1 | |
| 10C1062G01 | FIXTURE, PULLER - NO. 4 BEARING INNER RACE | 1 | |
| 10C1218G02 | FIXTURE, PULLER - HPT AFT AIR SEAL (PULLER FIXTURE) (HIGHER REMOVAL FORCE FOR THE AFT AIR SEAL 2044M65P03) | 1 | |
| 10C1253G01 | CF34-10 FIXTURE PULLER-AGB SCAV SCREEN E195 | 3 | |
| 10C1291 | PULLER - NO 4 BEARING OUTER RACE | 1 | |
| 10C1291G01 | PULLER, BEARING - NO. 4, OUTER RACE (BEARING PULLER) | 1 | |
| 1106020 | END BELL PULLER (4 IT) | 1 | |
| 11C3139 | PULLER - ASSY - NO 4 BRG AFT ROTATING AIR SEAL | 1 | |
| 12087 | RIVET PULLER (GUN ONLY): CHERRYMAX 704B | 2 | |
| 12098 | CHERRY MAX PENUMATIC RIVITER G704B WITH HEAD PULLER (KIT) | 1 | |
| 167-8539 | PULLER NO.4 BEARING | 1 | |
| 1C9608G01 | PUSHER/PULLER HPT (USED WITH 2C 14199G09) | 1 | |
| 21C7717P01 | PULLER No 4 SLAVE | 1 | |
| 2308 | 1/4-28 Thread Tee Handle Puller | 3 | |
| 2557762 | BYPASS VALVE SLEEVE PULLER (CAGE: 06848) | 1 | |
| 2557764 | PCR REGULATOR VALVE SLEEVE PULLER (CAGE: 06848) | 1 | |
| 2557781 | HEATED SERVO FILTER PULLER (CAGE: 06848) | 1 | |
| 2557785 | SHUTOFF VALVE SEAT PULLER (CAGE: 06848) | 1 | |
| 2557786 | PC SERVO REGULATOR SLEEVE PULLER (CAGE: 06848) | 1 | |
| 2557808 | HEAD SENSOR SLEEVE PULLER (CAGE: 06848) | 1 | |
| 2566525 | INTEGRATOR SLEEVE PULLER (CAGE: 06848) | 1 | |
| 2566526 | INTEGRATOR SLEEVE FREEZE FIXTURE PULLER (CAGE: 06848) | 1 | |
| 2566534 | METERING VALVE INSTALLATION/REMOVAL PULLER (CAGE: 06848) | 1 | |
| 2566538 | PRESSURE SHUTOFF VALVE REMOVAL PULLER (CAGE: 06848) | 1 | |
| 2566540 | SHUTOFF SOLENOID INSTALLATION/REMOVAL PULLER (CAGE: 06848) | 1 | |
| 2566546 | SHUTTLE VALVE SLEEVE INSTALLATION/REMOVAL PULLER (CAGE: 06848) | 1 | |
| 2566558 | SLEEVE RETAINER PULLER (CAGE: 06848) | 1 | |
| 2566818 | SPEED SERVO SLEEVE PULLER (CAGE: 06848) | 1 | |
| 2566820 | BURNER STAGING VALVE SOLENOID INSTALLATION/REMOVAL PULLER (CAGE: 06848) | 1 | |
| 2566825 | MAGNET RETAINER PULLER (CAGE: 06848) | 1 | |
| 2566828 | LEE JET PULLER (CAGE: 06848) | 1 | |
| 23052540 | Puller - #4 Carbon Seal | 1 | |
| 23054813 | PLUG, FAN SHAFT PULLER PLATE (USE WITH PULLER 23054809). | 2 | |
| 23068494 | PULLER, LOCATING TURBINE VANE PLUG. (SUPERSEDES PULLERS 23060636 AND 23054759). | 1 | |
| 23068498 | ADAPTER ARBOR PRESS PLATE PULLER, (USE WITH PLATE 23054809). | 1 | |
| 23068614 | Puller – No. 4 Carbon Seal Runner & Spacer | 1 | |
| 23076507 | Puller – No 4 Carbon Seal | 1 | |
| 23083838 | Puller – No. 4 Carbon Seal Runner & Spacer | 1 | |
| 23094395 | PULLER, WHEEL-STAGE 3 TURBINE WHEEL FROM STAGE 4 | 1 | |
| 281948-1-1 | Puller, F-414 Starter, | 1 | |
| 294861-1 | BEARING REMOVAL ADAPTER (USED TO LOCATE IN LARGER ID OF 3860168I STARTER GEAR TO PROVIDE A PRESSING SURFACE WHEN PRESSING GEAR FROM 3860160-1 BALL BEARING. USE WITH PROTO PULLER 4214 AND 294870-4 BEARING REMOVAL PLATE) | 1 | |
| 294861-2 | BEARING REMOVAL ADAPTER (USED TO LOCATE IN SMALLER ID OF 38601681 STARTER GEAR TO PROVIDE A PRESSING SURFACE WHEN PRESSING GEAR FROM 3860160-1 BALL BEARING. USE WITH PROTO PULLER 4214 AND 294870-4 BEARING REMOVAL PLATE) | 1 | |
| 294881-3 | ROTOR AND BEARING MECHANICAL PULLER (REMOVES OIL SLINGER ROTOR AND BEARING FROM COUPLING (ALTERNATE TO 294881-1)) | 1 | |
| 296937-1 | PULLER - SEAL, OIL PUMP SHAFT - GTCP85-129 ONLY - 737-100/200/300/400/500; B734F; ATA 49-00-00 | 1 | |
| 2C14061G02 | PULLER, NO.4 BEARING AFT INNER RACE | 1 | |
| 2C14061G03 | PULLER, #4 BEARING AFT INNER RACE | 3 | |
| 2C14062G01 | PULLER, NO.4B FORWARD INNER RACE AND ROTATING AIR/OIL SEAL | 1 | |
| 2C14065G02 | PULLER, OUTER RACE-NO.4B BEARING | 1 | |
| 2C14069G02 | PULLER, HOUSING-NO.4B AND NO.4R BEARING | 1 | |
| 2C14618G02 | PULLER, SUMP CLOSURE AND SEAL STATIONARY NO.4R&5R BEARINGS | 3 | |
| 2C14666G01 | PULLER INSTALL REMOVE NO. 4BRG OUTER RACE | 3 | |
| 2C14669G01 | PULLER, NO. 4R BEARING INNER RACE, ROTATING AIR, OIL SEAL, AND NO. 4B BEARING | 3 | |
| 2C14669G02 | PULLER, NO. 4R BEARING INNER RACE, ROTATING AIR, OIL SEAL, AND NO. 4B BEARING FWD RACE ( PULLER ) | 1 | |
| 2C14694G01 | PULLER HEAT SHIELD- NO 4 BRG | 2 | |
| 2C14811G01 | PULLER SB72-648R1 TOOL | 2 | |
| 2C6007G01 | PULLER,NO.4B BEARING-HOSING AN | 1 | |
| 2C6007P09 | PULLER #4 BRG HOUSING & STATIONARY AIR SEAL | 1 | |
| 2C6009 | PULLER, ADAPTER- NO 4 BRG ROTATING AIR & OIL SEAL | 2 | |
| 2C6009G01 | NO. 4 BRG AIR/OIL SEAL PULLER ADAPTER | 1 | |
| 2C6009G01 | PULLER,ADAPTER-NO.4 BEARING AI | 1 | |
| 2C6044G01 | PULLER- NO. 4 BEARING FORWARD | 1 | |
| 2C6045G02 | PULLER #4 OUTER RACE | 1 | |
| 2C6047 | PULLER, ADAPTER - NO.4 BRG INNER RACES & FWD SEAL | 2 | |
| 2C6047G01 | PULLER ADAPTER-NO. 4 BEARING | 1 | |
| 2C6047G02 | NO. 4 BEARING INNER RACES AND FORWARD SEAL PULLER ADAPTER | 1 | |
| 2C6251G02 | NO. 4 BRG SPLIT NUT LOCK RING PULLER | 1 | |
| 2C6299G06 | PULLER, NO. 4 BEARING RACES AND SEALS | 1 | |
| 2C81169 | PULLER - NO 4 BEARING IR & SEA | 1 | |
| 2C81169G02 | PULLER, NO. 4 OIL SEAL AND INNER RACE | 1 | |
| 2C81181G01 | PULLER, #3 BRG SPACER CF34 | 1 | |
| 2C81195G01 | PULLER,STG 1& 2 BLISK CF34 | 1 | |
| 2C81413 | PULLER - #4 OIL SEAL, HPTR | 1 | |
| 2C81413G02 | PULLER, HPT ROTOR NO. 4 OIL ROTATING SEAL | 1 | |
| 2C91013 | PULLER - #4&7 BRG IR&SR&AIR | 1 | |
| 2C91013G01 | PULLER - #4 BEARING | 1 | |
| 2C91232 | PULLER-LPT STG 3&4 | 1 | |
| 2C91232G01 | PULLER-DISK 3RD AND 4TH STAGE LPT | 1 | |
| 2C91235 | PULLER-LPT STG 4&5 | 1 | |
| 2C91235G01 | PULLER-DISK LPT STAGE 4 AND 5 | 1 | |
| 2ME65B19248 | PULLER SET - 4 BAR LINKAGE, TRAILING EDGE FLAP | 1 | |
| 2MIT65B01201 | PULLER - SEAL RETAINER SPL-5134 | 12 | |
| 31TG10491 | 4470 010792021POINTER PULLER | 1 | |
| 3C3165G02 | #4 BEARING OUTER RACE PULLER | 1 | |
| 3G6005G00231 | PULLER KIT, M/R AND T/R UPPER RING REM. (GF-14-00) | 1 | |
| 406-240-009-115 | TOOL PULLER SET 406-240-009-115 | 1 | |
| 42520-167-202 | PULLER – SEAL ALTERNATE HOWELL INSTRUMENTS P/N 42520-167-202 | 2 | |
| 563C35 | TOOL (FOR H84A-8 PULLER HEAD.) | 1 | |
| 615B40-4 | TOOL (FOR H681-4C PULLER HEAD.) | 1 | |
| 62580 | 3 JAW GEAR PULLER (2 POSITIONS) 80-420 MM | 1 | |
| 62585 | 2 JAW GEAR PULLER (2 POSITIONS) 80-420 MM | 1 | |
| 62802 | UNIVERSAL 4 JAW GEAR PULLER 45-210 MM | 1 | |
| 62816 | 3 JAW GEAR PULLER Ø 4" | 1 | |
| 62818 | 2 JAW GEAR PULLER Ø 4" | 1 | |
| 62822 | 3 JAWS LIGHT GEAR PULLER Ø 2.3/4" | 1 | |
| 62823 | 3 JAW LIGHT GEAR PULLER Ø 3.1/4" | 1 | |
| 62825 | 2 JAW LIGHT GEAR PULLER Ø 2.3/4" | 1 | |
| 62826 | 2 JAW LIGHT GEAR PULLER Ø 3.1/4" | 1 | |
| 62842 | PULLER WITH EXTENSION FOR BEARING SEPARATOR 4" | 1 | |
| 62846 | EXTENSIONS FOR BEARING SEPARATOR PULLER 4" | 1 | |
| 6797000 | PULLER, T" HANDLE 1/4-28 THREAD | 3 | |
| 6799622 | PULLER, #4 BEARING | 2 | |
| 6893521 | PLATE, 15MM X 42MM X 13MM BEARING PULLER, ACCESS GEAR BOX | 2 | |
| 701B18 | TOOL (FOR H701B-456 PULLER HEAD.) | 6 | |
| 71040001 | 11400/1 - 8-12mm INTERNAL PULLERS | 1 | |
| 71040002 | 11400/2 - ITERNAL PULLER 12-15MM | 1 | |
| 71040005 | 11400/4a 25-30mm INTERNAL PULLERS | 1 | |
| 71040006 | 11400/5 - 30-35MM INTERNAL PULLER | 1 | |
| 71040008 | 11400/7 - 45-55MM INTERNAL PULLERS | 1 | |
| 71040009 | 11400/8 - INTERNAL PULLERS 55-70mm | 1 | |
| 71120013 | 11040N-3-BATTERY TERMINAL PULLER | 1 | |
| 71160013 | *OBSOLETE see 71040005* 11060.3-INTERNAL PULLER | 1 | |
| 71161011 | *OBSOLETE see 71040002* 11060.1-INTERNAL PULLER | 1 | |
| 71180011 | 11042.1-BATTERY TERMINAL PULLER | 1 | |
| 71180012 | 11042N-2-BATTERY TERMINAL PULLER | 1 | |
| 76700-20132-041 | PITCH BEAM PULLER, P/N : 76700-20132-041 | 1 | |
| 831411-1 | SEAL ROTOR AND SPLINED ADAPTER REMOVAL/ INSTALLATION KIT (CONSISTS OF 831411-11 SEAL PULLER, 831411-13 SEAL INSTALLER, AND 831411-15 SPLINE PULLER) | 1 | |
| 834443-1 | FAN PULLER (SUPPORTS 3826127-1 SEAL CARRIER DURING REMOVAL OF 3611175-1 SEAL ASSEMBLY SUPERSEDES 294880-1) | 1 | |
| 856A1216 | PULLER-NO.4 BRG. OUTER RACE, OIL SEAL & AIR DUCT | 2 | |
| 856A1216 G01 | Puller ‐ No. 4 Brg Outer Race Oil Seal & Air Duct | 3 | |
| 856A1216 G02 | PULLER - NO. 4 BEARING OUTER RACE, OIL SEAL AND AI | 12 | |
| 856A1216 REV C | PULLER-NO.4 BRG. OUTER RACE, OIL SEAL & AIR DUCT | 1 | |
| 856A1216G01 | PULLER NO. 4 BEARING | 3 | |
| 856A1216G02 | Puller - No. 4 Bearing Outer Race, Oil Seal and Air Duct (puller) | 12 | |
| 856A1216G03 | PULLER - #4 BRG OUTER RACE - OIL SEAL & AIR DUCT | 1 | |
| 856A2381 | PULLER- LPT STAGE 4 ROTATING AIR SEAL | 1 | |
| 856A2381G01 | PULLER-LPT.STAGE 4 ROTATING AIR SEAL | 2 | |
| 856A2661G01 | PULLER – AFT ROTATING AIR SEPERATOR (SPL-14020) | 14 | |
| 856A2954G01 | SPL-11284 PULLER - SPACERS, FAN BLADE | 16 | |
| 856A3272 | PULLER, #4 BEARING | 1 | |
| 856A3272 G01 | Puller ‐ No. 4 Bearing Forward Rotating Oil Seal | 5 | |
| 856A3272G01 | PULLER NO 4 BRG FORWARD ROTATING OIL SEAL | 5 | |
| 856A3308 | PULLER #4 BRG INNER RACE | 1 | |
| 856A3308 G03 | Puller No 4 Brg | 1 | |
| 856A3308G03 | PULLER NO.4 BRG | 1 | |
| 856A3308G04 | PULLER - NO. 4 BEARING INNER RACE (PULLER) | 5 | |
| 856A3308G05 | PULLER 4 BRG INNER RACE | 8 | |
| 856A3308G06 | PULLER #4 BRG INNER RACE | 3 | |
| 856A3617G01 | SPL-2447 Puller - Magnetic Plug, Lubrication Unit | 32 | |
| 856A3707G07 | SPL-15042 PULLER - SPACERS, FAN BLADE | 9 | |
| 856A3707P27 | (PINS OF SPL -15042 (PULLER - SPACERS, FAN BLADE - 856A3707G08) | 3 | |
| 856A3707P28 | (PINS OF SPL -15042 (PULLER - SPACERS, FAN BLADE - 856A3707G08) | 4 | |
| 856A3707P29 | (PINS OF SPL -15042 (PULLER - SPACERS, FAN BLADE - 856A3707G08) | 3 | |
| 856A3779G01 | SPL-2324 PULLER - PLATFORM, FAN BLADE | 11 | |
| 856A3779G02 | SPL-2324 PULLER - PLATFORM, FAN BLADE | 25 | |
| 856A3947G01 | SPL-15043 PULLER - SPACER, FAN BLADE | 9 | |
| 856A3947G02 | SPL-15043 PULLER - SPACER, FAN BLADE | 10 | |
| 856AI2I6 | PULLER-NO.4 BRG. OUTER RACE, OIL SEAL & AIR DUCT | 1 | |
| 865C25 | TOOL (FOR H84-4 PULLER HEAD.) | 2 | |
| 9429M49G01 | SPL-8408 - PULLER EGT PROBE | 4 | |
| 9480M17G03 | PULLER, BEARING 2, 4, 7 | 1 | |
| 956A1039 | PULLER - ASSY - NO. 4 BRG FWD ROTATING OIL SEAL | 1 | |
| 956A3039 | PULLER - ASSEMBLY-NO. 4 BEARING FWD ROTATING OIL SEAL | 1 | |
| 956A6915 | SET - PULLER - LINE 4 BEARING - AGB | 1 | |
| 956A8051G02 | FAN BLADE SPACER PULLER (SPL-14662) | 6 | |
| 9C1092 | PULLER - #4 INNER RACE | 1 | |
| 9C3167 | PULLER-#4 BRG AFT ROTATING OIL SEAL | 1 | |
| A54008-1 | Puller Equipment -Fuse Pin (Repl. By A54018) | 6 | |
| A54008-13 | Puller Equipment -Fuse Pin (Repl. By A54018) | 5 | |
| A78021-48 | PULLER ASSEMBLY - PISTON (A78021-48 INCLUDED IN A78021-46) | 1 | |
| AC114 | PULLER, CF34/8/10 IDG | 1 | |
| AGE-04370-401 | GSE 242 PULLER - BALL JOINT, MLG | 4 | |
| AGNKK1424 | PULLER,WIPER ARM NO.4 | 1 | |
| AGNKK201S | PULLER,4.5 TON,2-ARM,3.6IN B | 1 | |
| ASP-244 | ASP Pneumatic Puller Set (244 Huckgun/99-2642 head) | 1 | |
| B32003-1 | NLG PIN PULLER (IN 0006545) | 12 | |
| BS428P | CELL PULLER FOR MARATHON BATTERY 1/4-28 FEMALE | 1 | |
| BS428W | Aviall BS428W 38 Hex Screw NiCad Battery Cell Puller | 1 | |
| C32016-46 | ASSEMBLY - SEAL PULLER (C32016-6 PART OF C32016-33,-46) | 14 | |
| C32032-125 | SPL-1864, PULLER EQUIPMENT - AXLE SLEEVE ASSEMBLY | 9 | |
| C32033-5 | R/I EQUIPMENT - TRUNNION PIN, NLG (NOTE: C32033-5 DRAG STRUT TRUNNION PIN PULLER ASSY IS INCLUDED IN SPL-14481 KIT) | 6 | |
| C32033-6 | R/I EQUIPMENT - TRUNNION PIN, NLG (NOTE: C32033-6 NLG TRUNNION PIN PULLER ASSY IS INCLUDED IN SPL-14481 KIT) | 5 | |
| C400H Ingersoll Rand | Wire Rope Puller 1,700/3,400-Lb. Capacity, 1/4in. Load Chain Diameter | 1 | |
| CG240-8 | SNAP-ON PULLER ROD WITHOUT END FITTING CG240-8 (PULLER) | 4 | |
| CG240-9 | SNAP-ON PULLER SLIDE HAMMER CG240-9 (SLIDE HAMMER, CG240) | 4 | |
| CG240H | SNAP-ON PULLER SLIDE HAMMER CG240-9 (SLIDE HAMMER, CG240) | 1 | |
| CG250-8A | PULLER - SLIDE SCREW, 5/8-18 UNF 737-300, -400, -500 | 5 | |
| CG4000A2S | PULLER CHAIN BLOCK 2 TON, CG4000A2S, | 1 | |
| CJ107 | BODY DENT PULLER 4LBS | 1 | |
| CPWA-30473 | Puller - # 4 Bearing | 1 | |
| DAPT65-0108-00 | PULLER (SERIES 400) | 6 | |
| F80126-9 | PULLER EQPT - SLEEVE, AXLE ASSEMBLY, MAIN LANDING GEAR - 737-100/200/300/400/500 | 7 | |
| F80158-1 | TRUNNION PIN & BEARING PULLER SET - NOSE GEAR- 737-100/200/300/400/500 | 5 | |
| F80158-17 | TRUNNION PIN & BEARING PULLER SET - NOSE GEAR- 737-100/200/300/400/500 | 20 | |
| G32010-3 | PULLER - SLEEVE, AXLE (USED WITH 3MIT65B01216 TO MAKE APPLICABLE TO 747-400/400F) | 3 | |
| GS10251 | PULLER, MECHANICAL 10-24 | 1 | |
| GS10844 | PULLER MECHANICAL #5-4 | 1 | |
| GS13064-1 | PULLER - FINE FUEL FILTER_44.4X139.7MM/0.34KG_[GS13064-1] | 2 | |
| GS21294-1 | ATR42 SPINNER PULLER TOOLS | 12 | |
| HD800-8 | PULLER HEAD FOR 1/4" CHERRY MAX | 2 | |
| HS8641 | HS8641 - MECHANICAL PULLER. | 3 | |
| IAE 1P16624 | IAE 1P16624 SLIDE PULLER | 1 | |
| IAE1F10009 | PULLER, REMOVAL LHT Dwg No.(537260004) | 14 | |
| IAE1F10067 | PULLER, REMOVAL LHT Dwg No.(537260024) | 16 | |
| IAE1F10097 | PULLER, REMOVAL LHT Dwg No.(537260041) | 1 | |
| IAE1F10106 | PULLER, REMOVAL LHT Dwg No.(537260049) | 1 | |
| IAE1F10220 | PULLER, REMOVAL LHT Dwg No.(537260124) | 5 | |
| IAE1J12023 | PULLER, HOOKING LHT Dwg No.(537230040) | 1 | |
| IAE1J12208 | PULLER, HOOKING LHT Dwg No.(537220034) | 1 | |
| IAE1J12273 | PULLER, MECHANICAL LHT Dwg No.(537220041) | 1 | |
| IAE1J12352 | PULLER, HOOKING LHT Dwg No.(537220064) | 1 | |
| IAE1J12420 | PULLER, HYDRAULIC LHT Dwg No.(537220094) | 1 | |
| IAE1J12478 | PUSHER/PULLER, HYDRAULIC LHT Dwg No.(537220114) | 1 | |
| IAE1J12547 | PULLER, HOOKING LHT Dwg No.(537220148) | 1 | |
| IAE1J13504 | PULLER 504A | 13 | |
| IAE1M14126 | PULLER HYD.see IAE1M14149 | 1 | |
| IAE1P16064 | PULLER, SLIDE LHT Dwg No.(537250164) | 1 | |
| IAE1P16093 | PULLER, KNOCKER LHT Dwg No.(537240006) | 1 | |
| IAE1P16125 | PULLER, REMOVE LHT Dwg No.(537230014) | 2 | |
| IAE1P16184 | PULLER, KNOCKER LHT Dwg No.(537250074) | 16 | |
| IAE1P16387 | PULLER, JAW ASSEMBLY LHT Dwg No.(537230042) | 1 | |
| IAE1P17038 | PULLER, SLIDE LHT Dwg No.(537250054) | 18 | |
| IAE1P17043 | PULLER, JACKSCREW LHT Dwg No.(537230044) | 1 | |
| IAE1R18824 | EXTRACTOR, PULLER LHT Dwg No.(537230184) | 1 | |
| IPK1330 | 04-08 DURAMAX INJCTR PULLER KT | 1 | |
| J32004-23 | Puller - Trunnion Pin, NLG (Combines J32004-21 And J32004-22 Kits), Used On All 777 Airplane | 10 | |
| K32042-1 | SLEEVE PULLER_[K32042-1] | 8 | |
| KN-4431J02 | KNIPEX PULLER 8-13MM 45? | 1 | |
| KUK1424 | PULLER,WIPER ARM NO. 4 | 1 | |
| KUK2010S | PULLER 4.5 TON, 2-ARM 5IN B | 1 | |
| KUK201S | PULLER 4.5 TON, 2-ARM 3.6IN B | 1 | |
| KUKK1424 | 4PC UNIV WIPER ARM PULLER SET | 1 | |
| KUKK203010S | PULLER SET 2/3 ARM, 4IN-14IN | 1 | |
| L6000 4/40 | RIVTNUT HANDLE PULLER 4/40 | 2 | |
| LTCT14818 | PULLER, HYDRAULIC 4TH | 1 | |
| LTCT14818-01 | PULLER, HYDRAULIC 4TH TURBINE WHEEL | 1 | |
| LTCT4800 | 3/4 BEARING HSG PULLER | 2 | |
| PF111179 | PULLER - OBSOLETE REPLACE BY PWC51024 | 1 | |
| PWA 101359 | PULLER, MECHANICAL (PRE SB PW4ENG 73−88) | 2 | |
| PWA 16117 | PULLER NO4.5 BEARING SEALS | 2 | |
| PWA 27903 | PULLER, T4 DISK - USE WITH PWA 27843 | 2 | |
| PWA 29526 | 7R4 PLATE PULLER BRACKET USE WITH PWA 25978 | 1 | |
| PWA 29944 | PULLER STG 4 | 2 | |
| PWA 30174 | PULLER NO.4 BEARING SCAVANGE PUMP | 1 | |
| PWA 80609 | PULLER, KNOCKER (OPTIONAL TO PWA 84507) | 1 | |
| PWA 81751 | PULLER, NO. 4 BEARING SPACER, HAND | 1 | |
| PWA 85201 | PULLER (REPLACED BY PWA 107824) | 1 | |
| PWA12076 | PULLER BRG.NO.4 BRG | 1 | |
| PWA12365 | PULLER NO. 4 1/2 OUTER RACE BEARING | 4 | |
| PWA211351 | NO. 4 BEARING HYDRAULIC PULLER | 1 | |
| PWA25001 | PULLER - TACHOMETER DRIVE SEAL_127X76X58MM/1.4KG_[PWA25001] | 3 | |
| PWA25014 | PULLER - ENG STARTER DRIVE SEAL RETAINER_DIA.109X406MM/3.0KG_[PWA25014] | 2 | |
| PWA25033C | PULLER - LAST CHANCE SCREEN_DIA.19X254MM/0.787KG_[PWA25033C] | 1 | |
| PWA25034 | PULLER - OIL PRESSURE REGULATOR VALVE_[PWA25034] | 2 | |
| PWA25062 | PULLER KNOCKER 1/4 -28 THREAD ANGLE GEARBOX PINS | 1 | |
| PWA25284 | PULLER - MGB HYD PUMP GRSH BALL BRG_[PWA25284] | 2 | |
| PWA25342 | PULLER - MGB SCAV PUMP GRSH BRG_[PWA25342] | 2 | |
| PWA25406 | PULLER - IMC #1 BRG TRANSFER TUBE_[PWA25406] | 2 | |
| PWA25413 | PULLER - LPC ARBOR BEARING REMOVE_[PWA25413] | 1 | |
| PWA25424 | PULLER - HPT AIRSEAL 1ST STAGE_[PWA25424] | 1 | |
| PWA25452 | PULLER - T/S/COUPLING BRG INNER RACE_[PWA25452] | 2 | |
| PWA25461 | PULLER - IMC G/B G/SHAFT & HOUSING_[PWA25461] | 2 | |
| PWA25564 | PUSHER/PULLER - MGB BRACKETS BRG REM_[PWA25564] | 2 | |
| PWA25584 | PULLER HYD-#3 BRG INNER RACE_[PWA25584] | 2 | |
| PWA25594 | PULLER - HPC, ROTOR ASSY DISK AIRSEAL_[PWA25594] | 2 | |
| PWA25594B | PULLER-HPC, ROTOR ASSY DISK AI_[PWA25594B] | 1 | |
| PWA25754A | PULLER - T/S/COUPLING BRG INNER RACE_[PWA25754A] | 1 | |
| PWA25947 | PULLER - HPT 2ND STG TURB AIR SEAL_[PWA25947] | 1 | |
| PWA26184 | PULLER - STARTER DRIVE COUPLING_DIA.38X178MM/0.46KG_[PWA26184] | 2 | |
| PWA26499 | PULLER - G/B N2 TACH BALL BRG_[PWA26499] | 1 | |
| PWA26525 | PULLER_203X76X25.4MM/0.45KG_[PWA26525] | 2 | |
| PWA26940 | PULLER - BLADE, HPT1ST STG BAFFLE_[PWA26940] | 1 | |
| PWA27743 | PULLER - 2ND STG TURB ROTOR_[PWA27743] | 2 | |
| PWA27746 | PULLER - HPT 1,2ND DISK LENTICUL A/SEAL_[PWA27746] | 2 | |
| PWA27814 | PULLER, KNOCKER - LPC AIRSEAL, 3RD STG_[PWA27814] | 2 | |
| PWA28142 | PULLER-GEAR OIL STRAINER ASSY_[PWA28142] | 3 | |
| PWA28143 | PULLER, KNOCKER - OIL PRESS RELIEF VALVE_DIA.38.1X279MM/1.1KG_[PWA28143] | 3 | |
| PWA28168 | PULLER - LPT, 5TH HUB FROM 4TH DISK_[PWA28168] | 2 | |
| PWA28418 | PULLER - #1,2 BRG SEAL TRANSFER TUBE_[PWA28418] | 2 | |
| PWA28442 | PULLER - IMC & SUMP, GUIDE PIN_[PWA28442] | 1 | |
| PWA28461 | PULLER - ENG SUPPORT BOLT_[PWA28461] | 1 | |
| PWA29446 | PULLER,PUSHER - HYD COMP ROTOR 1ST_DIA.102X381MM/4.0KG_[PWA29446] | 1 | |
| PWA29480A | PULLER_[PWA29480A] | 1 | |
| PWA29482 | PULLER-CARBON SEAL_[PWA29482] | 1 | |
| PWA29544 | PULLER_[PWA29544] | 2 | |
| PWA29548 | PULLER_[PWA29548] | 1 | |
| PWA29648C | PULLER_[PWA29648C] | 1 | |
| PWA29942 | PULLER_[PWA29942] | 2 | |
| PWA29943 | PULLER_[PWA29943] | 2 | |
| PWA29944 | PULLER_[PWA29944] | 2 | |
| PWA29945 | PULLER-LPT #3 STG AIRSEAL_[PWA29945] | 2 | |
| PWA29982 | PULLER - ENG ASSY TEC NO.4 BRG AND SEAL_[PWA29982] | 1 | |
| PWA32052 | 1 PULLER KNOCKER 4 1/2 | 4 | |
| PWA45248 | PULLER NO.4 BEARING | 5 | |
| PWA45336 | #4 BEARING DRAIN TUBE PULLER | 1 | |
| PWA45520 | PUSHER / PULLER (Alternate to PWA 45017) | 3 | |
| PWA46194 | PULLER REMOVE 4TH STG DISK LPT | 1 | |
| PWA46270 | Puller, Hydraulic; #4 Bearing | 2 | |
| PWA75044 | PULLER_[PWA75044] | 2 | |
| PWA75284 | PULLER,KNOCKER - LPT PLATE FORM SHAFT_430X127X127MM/3.2KG_[PWA75284] | 2 | |
| PWA75403 | PULLER-HPT, 2 STG TURBVOEDUCT_[PWA75403] | 2 | |
| PWA75406 | PULLER_[PWA75406] | 2 | |
| PWA75442 | PULLER_[PWA75442] | 1 | |
| PWA76101 | PULLER ( JT9D-7R4G2 ENG )_[PWA76101] | 1 | |
| PWA81751 | PULLER, NO. 4 BEARING SPACER, HAND | 1 | |
| PWA85306 | PULLER - KNOCKER, PW4000 FAN/LPT COUPLING PLUG | 7 | |
| PWA85307 | PULLER-JACKSCREW ENG ASSY N.4 BEARING COVER | 9 | |
| PWA85688 | PULLER, JACKSCREW - VSV ACTUATOR_REM TRUNNION PINS FOR THE SVA_0.2 KG / 41 X 41 X 33 MM_[PWA85688] | 9 | |
| PWA86081 | PULLER, MECHANICAL - LPT B.S.I PLUG_TO REM THE LPT BORESCOPE PLUG_2.3 KG / DIA. 64 X 533 MM_[PWA86081] | 7 | |
| PWA86122 | PULLER, KNOCKER-CONE SEGMENT FAN_3.4KG/498X389X76MM_[PWA86122] | 9 | |
| PWA87208 | PULLER-JACKSCREW_127X115X46MM/0.7KG_[PWA87208] | 1 | |
| PWA87305 | PULLER, KNOCKER - IDG DRIVE SEAL RETAINR_4.4KG/DIA.140X336MM_[PWA87305] | 5 | |
| PWC30046-52 | PWC30046-52 PULLER (CPWA30046-52) | 16 | |
| PWC30046-54 | PULLER N°54 | 14 | |
| PWC30046-64 | PULLER N°64 | 2 | |
| PWC30085 | PULLER (OBSOL. 34537) | 1 | |
| PWC30128-06 | PULLER, NO.4 BEARING PRESSURE/SCAVENGE OIL TUBES | 7 | |
| PWC30416 | PULLER BELL 412 | 9 | |
| PWC30639 | Puller M-4.8 | 1 | |
| PWC30727 | PULLER, BEARING (PWC34537) | 2 | |
| PWC31064 | PULLER, PRE-SB7115 NO.4 BRG CARBON SEAL (SUPERSEDED BY PWC31664) | 1 | |
| PWC31274 | PULLER, NO. 4 BEARING CARBON SEAL | 1 | |
| PWC32849 | Puller M-4.7 | 1 | |
| PWC37347 | PULLER, NO. 4 BEARING HOUSING | 3 | |
| PWC38077 | PULLER CARRIER (020) 5120014240290 | 12 | |
| PWC38570 | PULLER, NO. 4 BRG HOUSING | 1 | |
| PWC38571 | PULLER, NO. 4 BRG OUTER RACE | 1 | |
| PWC42101 | Puller H-5.6 No. 4 inner race bearing | 1 | |
| PWC43580 | Puller M-4.2 | 1 | |
| PWC50126 | PULLER, #3 4 BEARING HOUSING REMOVAL | 1 | |
| PWC50537 | T-Handle Puller M-4.2 Puller | 3 | |
| PWC50714 | PULLER (ALTERNATE PN: PWC32472) | 9 | |
| PWC50717 | Puller M-4.3 | 7 | |
| PWC52357 | PUSHER/PULLER, FERRULE (POST-SB7452) | 2 | |
| PWC54111 | BOLT ACTION PULLER M-14 | 1 | |
| PWC55059 | PULLER − LIP SEAL CARRIER FROM COVER (SERIES 400) | 5 | |
| PWC55653 | Puller M-14.0 | 1 | |
| PWC56303 | Puller BEARING USE WITH PWC54441 | 2 | |
| PWC61195 | PULLER H-4.8 | 1 | |
| PWC64247 | PULLER - ENGINE FILTER (SERIES 400) | 9 | |
| PWC65137 | PULLER H-2.4 | 1 | |
| PWC67620 | PW545 GARLOCK SEAL PULLER | 5 | |
| PWC68530 | PULLER-BRG-AGB H-4.0 | 1 | |
| PWC68563 | PULLER-ROTOR-HP COMPRESSOR H-4.4 | 1 | |
| PWC68565 | PULLER-BRG-IMPELLER SHAFTED H-4.0 | 1 | |
| PWC68572 | PULLER-GEAR-HP MODULE H-4.4 | 1 | |
| PWC68583 | PULLER-BRG 4-IMPELLER SHAFTED H-6.6 | 1 | |
| PWC68600 | PULLER-BRG INNER RACE-HP MODULE H-4.8 | 1 | |
| PWC68698 | PULLER H4.3 | 1 | |
| PWC68900 | PULLER M-4.5 | 1 | |
| PWC68980 | PULLER NO 4 BEARING | 1 | |
| PWC69027 | PULLER HP DISC H-4.7 | 1 | |
| PWC69492 | PULLER - 5 BEARING SEAL H-4.3 | 3 | |
| PWC71834 | Puller-BAFFLE PowerSECTION M-4.2 | 1 | |
| PWC85908 | PULLER - NO 4 BRG AREA ASSY | 1 | |
| RB OTC927 | Puller 6 3/4" And Puller Legs | 1 | |
| RB6893521 | Plate, 15Mm X 42Mm X 13Mm Bearing Puller, Access Gear Box | 1 | |
| RBT400210 | Tool Puller Set (406-240-009-115) | 2 | |
| RBT400275 | Mast Puller Set (430-240-004-101) | 1 | |
| RIV PULLER | 1/4 RIVNUT PULLER | 1 | |
| T-1784C | PULLER FOR COMMON 34 | 1 | |
| T-304079 | PULLER-IMPELLER (4 IT) | 1 | |
| T-304079-1 | PULLER-IMPELLER (4 IT) | 1 | |
| T-4209JB | BLOCKJAMMECHPULLER4211BAPROTO | 1 | |
| T-4210RJ | MECHCALPULLER 4211BA PROTO | 1 | |
| T-4229JB | BLOCKJAWMECHLPULLER4231APROTO | 1 | |
| T-4230RJ | MECHANICALPULLER 4231APROTO | 1 | |
| T-511035 | 3/4IN FLANGE PULLER FOR 6930 | 1 | |
| TAP1225 | FORD 6.4L TURBO ARM PULLER | 1 | |
| TK1573-918-1 | FEEDBACK RING PULLER - 4 BLADE (NOT USE) ATA 61 | 2 | |
| WCI-1700-20Q | PULLER(SB:A320-53-1240) | 3 | |
| WCI-300P-60/63-10 | PILOT,FOR 3/16IN-15/64IN NOMINAL FASTENER SIZE,PULLER STACKUP L=1 | 1 | |
| WCI-CMX-06-1-1-10 | MANDREL,FOR 13/64" NOMINAL HOLE SIZE,PULLER STAC | 1 | |
| WCI-CMX-08-0-1-10 | MANDREL,FOR 1/4" NOMINAL HOLE SIZE,PULLER STACKU | 1 | |
| WCI-CMX-08-1-1-10 | MANDREL,FOR 17/64" NOMINAL HOLE SIZE,PULLER STAC | 1 | |
| WCI-CMX-10-1-1-10 | MANDREL,FOR 21/64" NOMINAL HOLE SIZE,PULLER STAC | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
