| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| AB72001-VX7 | PULLER - REMOVAL | 1 | |
| IAE1F10007 | PULLER - REMOVAL | 6 | |
| IAE1F10008 | PULLER - REMOVAL | 4 | |
| IAE1F10036 | PULLER - REMOVAL | 1 | |
| IAE1F10069 | PULLER - REMOVAL | 7 | |
| IAE1F10220 | PULLER - REMOVAL | 1 | |
| IAE1F10252 | PULLER - REMOVAL | 1 | |
| IAE1F10255 | PULLER - REMOVAL | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 109-3400-61-1 | PULLER SET - UPPER CASE REMOVAL (MGB) | 1 | |
| 10C1094G01 | Puller,impact-hich pressure turbine shroud removal | 1 | |
| 10C1218G02 | FIXTURE, PULLER - HPT AFT AIR SEAL (PULLER FIXTURE) (HIGHER REMOVAL FORCE FOR THE AFT AIR SEAL 2044M65P03) | 1 | |
| 294861-1 | BEARING REMOVAL ADAPTER (USED TO LOCATE IN LARGER ID OF 3860168I STARTER GEAR TO PROVIDE A PRESSING SURFACE WHEN PRESSING GEAR FROM 3860160-1 BALL BEARING. USE WITH PROTO PULLER 4214 AND 294870-4 BEARING REMOVAL PLATE) | 1 | |
| 294861-2 | BEARING REMOVAL ADAPTER (USED TO LOCATE IN SMALLER ID OF 38601681 STARTER GEAR TO PROVIDE A PRESSING SURFACE WHEN PRESSING GEAR FROM 3860160-1 BALL BEARING. USE WITH PROTO PULLER 4214 AND 294870-4 BEARING REMOVAL PLATE) | 1 | |
| 6796950 | KIT-PULLER, POWER AND ACCESSORY GEARBOX BEARING REMOVAL | 2 | |
| 6F6220G05631 | PULLER-PUSHER, TENSION LINK BUSHINGS REMOVAL-INSTALLATION | 1 | |
| 831411-1 | SEAL ROTOR AND SPLINED ADAPTER REMOVAL/ INSTALLATION KIT (CONSISTS OF 831411-11 SEAL PULLER, 831411-13 SEAL INSTALLER, AND 831411-15 SPLINE PULLER) | 1 | |
| 834443-1 | FAN PULLER (SUPPORTS 3826127-1 SEAL CARRIER DURING REMOVAL OF 3611175-1 SEAL ASSEMBLY SUPERSEDES 294880-1) | 1 | |
| 856A1017 | PULLER, IMPACT - HIGH PRESSURE TURBINE SHROUD REMOVAL | 1 | |
| 856A1017G01 | PULLER, IMPACT - HIGH PRESSURE TURBINE SHROUD REMOVAL | 1 | |
| 856A1017G02 | PULLER, IMPACT - HIGH PRESSURE TURBINE SHROUD REMOVAL | 1 | |
| 856A1017G03 | PULLER, IMPACT - HIGH PRESSURE TURBINE SHROUD REMOVAL | 1 | |
| 856A1017G04 | Puller, Impact - HPT Shroud Removal (impact puller) | 1 | |
| 856A2573G01 | PULLER - ADAPTER, COMPONENT REMOVAL | 3 | |
| 856A2632G01 | LPT SHAFT REMOVAL PULLER - CFM56 | 11 | |
| 856A2632G01 | PULLER - ADAPTER, COMPONENT REMOVAL | 11 | |
| 856A3129 | PAD, PULLER - HORIZONTAL GEARSHAFT BALL BEARING REMOVAL, TGB | 1 | |
| 856A3286 | TOOL SET, PULLER PADS - AGB/TGB BEARINGS REMOVAL | 1 | |
| 856A3576G03 | PUSHER PULLER - CARBON SEAL REMOVAL TOOL (SM) | 2085 | |
| 856A3617G01 | PULLER- MAGNETIC PLUG- REMOVAL/INSTALLATION LUBRICATION UNIT | 16 | |
| AB72001-VX8 | PULLER-REMOVAL | 1 | |
| F70310 | PULLER KIT -0 WING BOTTLE PIN & BUSHING REMOVAL | 1 | |
| F70310-1 | Puller kit-wing bottle pin & bushing removal FWD & AFT | 1 | |
| GSE55927 | PULLER -AXLE, REMOVAL & INSTALLATION BLG & WLG | 1 | |
| HU35451 | PULLER - NOSE CONE FAIRING REMOVAL, RB211 | 2085 | |
| IAE 1F10036 | PULLER-REMOVAL | 1 | |
| IAE1F10004 | PULLER-REMOVAL | 2085 | |
| IAE1F10007 | PULLER-REMOVAL | 6 | |
| IAE1F10008 | PULLER-REMOVAL | 4 | |
| IAE1F10008B | PULLER-REMOVAL | 1 | |
| IAE1F10009 | PULLER-REMOVAL | 8 | |
| IAE1F10010 | PULLER-REMOVAL | 6 | |
| IAE1F10010B | PULLER-REMOVAL | 1 | |
| IAE1F10036 | PULLER-REMOVAL | 1 | |
| IAE1F10067 | PULLER, REMOVAL - ENGINE ASSY, CASING AIR PORT DEOILER, GEARBOX | 7 | |
| IAE1F10069 | PULLER-REMOVAL | 7 | |
| IAE1F10220 | PULLER-REMOVAL | 1 | |
| IAE1F10252 | PULLER-REMOVAL | 1 | |
| IAE1F10255 | PULLER-REMOVAL | 1 | |
| IAE1F10292 | PULLER-REMOVAL | 1 | |
| IAE1F10293 | PULLER-REMOVAL | 1 | |
| IAE1F10294 | PULLER-REMOVAL | 1 | |
| IAE1J12004 | PULLER/PUSHER,REMOV/INSTA - ENGINE ASSY, FAN ROTOR, BLADE-REMOVAL | 4 | |
| IAE1J12020 | LEVER - FAIRING AND INLET CONE REMOVAL PULLER | 7 | |
| IAE1J12092 | Puller,removal-engine assy,fan rotor,blade | 1 | |
| J32036-60 | PULLER ASSEMBLY - REMOVAL/ INSTALLATION, AFT TRUNNION PIN | 2085 | |
| PWA107780 | PULLER-REMOVAL GEARBOX SHEARED STARTER DRIVE COUPLING | 1 | |
| PWA115878 | PULLER, JACKSCREW - BOROSCOPE PLUG LOCK REMOVAL , 1/2 | 1 | |
| PWA115880 | PULLER, JACKSCREW - BOROSCOPE LOCK REMOVAL , 7/16 | 1 | |
| PWA211270 | PULLER, MECHANICAL - REMOVAL OF THE ANGLE GEARBOX | 2085 | |
| PWA26682 | PULLER - HPC BLADE LOCK REMOVAL_[PWA26682] | 1 | |
| PWA88231 | PULLER - JACKSCREW, ENGINE ASSEMBLY, OIL TANK REMOVAL | 1 | |
| PWC30128-4 | PULLER T-HANDLE PLUG (REMOVAL OF OIL FILTER BYPASS) | 1 | |
| PWC30128-4V | PULLER T-HANDLE (OIL TANK COVER REMOVAL) | 1 | |
| PWC30128-7 | T-HANDLE PULLER (REMOVAL OF ENGINE OIL TANK COVER) | 1 | |
| PWC30128-7V | PULLER T-HANDLE (OIL TANK COVER REMOVAL) | 1 | |
| X56122267 | PULLER-OIL COOLER LOCK TAB REMOVAL | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
