| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 1C6899 | PULLER - MECHANICAL | 2 | |
| 280984 | PULLER - MECHANICAL | 1 | |
| 281174 | PULLER - MECHANICAL | 1 | |
| 281175 | PULLER - MECHANICAL | 1 | |
| GS15086-1 | PULLER - MECHANICAL | 1 | |
| HS7526 | PULLER - MECHANICAL | 1 | |
| HS7532 | Puller - Mechanical | 1 | |
| HS7538 | PULLER - MECHANICAL | 1 | |
| HS7542 | PULLER - MECHANICAL | 1 | |
| HS8038 | PULLER - MECHANICAL | 1 | |
| HS8169 | PULLER - MECHANICAL | 1 | |
| HS9482 | PULLER - MECHANICAL | 1 | |
| HS9521 | PULLER - MECHANICAL | 1 | |
| PWA32709 | PULLER - MECHANICAL | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 10C1108 | PULLER, SPACER - STG 1 FAN BLADE, MECHANICAL | 1 | |
| 289571-1 | PULLER - MECHANICAL, PAWL CARRIER | 4 | |
| 294879-1 | BEARING MECHANICAL PULLER (REMOVES 3822071-1 COMPRESSOR BEARING FROM 3810127-1 BEARING HOUSING ASSEMBLY AND | 1 | |
| 294881-3 | ROTOR AND BEARING MECHANICAL PULLER (REMOVES OIL SLINGER ROTOR AND BEARING FROM COUPLING (ALTERNATE TO 294881-1)) | 1 | |
| 3791166-1 | PIN,PIVOT- MECHANICAL PULLER ASSEMBLY | 1 | |
| 5.12001E 12 | PULLER, MECHANICAL CARBON SEAL G-AXIS | 1 | |
| 5120-01-338-1428 | PULLER, MECHANICAL-POWER OUTPUT SHAFT | 1 | |
| 5120011284467 | PULLER, MECHANICAL CARBON SEAL G-AXIS | 1 | |
| 8C3468 | PULLER - MECHANICAL - AGBX - FACE SEAL - HP1 - HP2 - FP | 1 | |
| 8C3469 | PULLER - MECHANICAL - AGBX - FACE SEAL - IDG | 1 | |
| 8C3470 | PULLER - MECHANICAL - AGBX - FACE SEAL - VSCF | 1 | |
| 8C3471 | PULLER - MECHANICAL - AGBX - RING MATING - HP1 - HP2 - FP | 1 | |
| 8C3472 | PULLER - MECHANICAL - AGBX - RING MATING - IDG | 1 | |
| 8C3473 | PULLER - MECHANICAL - AGBX - RING MATING - VSCF | 1 | |
| 8C3485 | PULLER - MECHANICAL - AGBX - FACE SEAL - HP2 - CRANK SIDE | 1 | |
| 8C3486 | PULLER - MECHANICAL - AGBX - RING MATING - HP2 - CRANK SIDE | 1 | |
| GS10251 | PULLER, MECHANICAL 10-24 | 1 | |
| GS10263 | PULLER-MECHANICAL SPINNER | 1 | |
| GS10844 | PULLER MECHANICAL #5-4 | 1 | |
| GS15580-1 | PULLER-INSTALLER, MECHANICAL | 4 | |
| HS-8149 | PULLER - MECHANICAL. BLADE BUSHING | 2 | |
| HS7520 | MECHANICAL PULLER - HIGH PRESSURE RELIEF VALVE, STANDBY VALVE AND PISTON AND SLEEVE ASSEMBLY | 1 | |
| HS7523 | MECHANICAL PULLER - BACKUP VALVE | 1 | |
| HS7525 | MECHANICAL PULLER - SCAVENGE PUMP, MAIN PUMP AND STANDBY PUMP DRIVE GEARS | 2 | |
| HS7526 | MECHANICAL PULLER - AUXILIARY PUMP FILTER ASSEMBLY AND MAIN AND STANDBY FILTER | 1 | |
| HS7528 | MECHANICAL PULLER - PUMP CHECK VALVES | 2 | |
| HS7530 | MECHANICAL PULLER - SELECTOR VALVE AND OIL LEVEL INDICATOR | 1 | |
| HS7532 | MECHANICAL PULLER - STANDBY VALVE | 1 | |
| HS7533 | MECHANICAL PULLER - AUXILIARY AC MOTOR DRIVE GEAR | 2 | |
| HS7534 | PULLER-MECHANICAL | 3 | |
| HS7535 | PULLER-MECHANICAL | 2 | |
| HS7536 | MECHANICAL PULLER - PUMP ASSEMBLIES | 1 | |
| HS7538 | MECHANICAL PULLER - STATIONARY FLUID TRANSFER SLEEVE, PUMP HOUSING | 1 | |
| HS7544 | PULLER-MECHANICAL | 1 | |
| HS7545 | PULLER-MECHANICAL | 1 | |
| HS7549 | MECHANICAL PULLER - BALL BEARING, PUMP HOUSING | 1 | |
| HS7556 | HS7556 - MECHANICAL PULLER. | 1 | |
| HS7557 | MECHANICAL PULLER - TORQUE AND BEARING SHAFT | 1 | |
| HS7580 | HS7580 - MECHANICAL PULLER. | 3 | |
| HS7702 | PULLER-MECHANICAL | 3 | |
| HS7721 | PULLER-MECHANICAL | 1 | |
| HS7859 | PULLER-MECHANICAL | 1 | |
| HS7860 | PULLER-MECHANICAL | 2 | |
| HS8064 | MECHANICAL PULLER - SUPPLY AND STANDBY FILTER | 2 | |
| HS8149 | PULLER-MECHANICAL BLADE BUSHING | 2 | |
| HS8173 | HS8173 - MECHANICAL PULLER. | 3 | |
| HS8174 | PULLER-MECHANICAL, OIL INDICATOR | 2 | |
| HS8259 | PULLER-MECHANICAL, PITCHLOCK ASSY | 1 | |
| HS8641 | HS8641 - MECHANICAL PULLER. | 3 | |
| HS8948 | MECHANICAL PULLER - FEATHER ACTUATING VALVE | 1 | |
| HS8951 | MECHANICAL PULLER - HEADED PIN | 1 | |
| HS9293 | PULLER-MECHANICAL DOME UNIV. | 2 | |
| HS9482 | MECHANICAL PULLER - PUMP ASSEMBLIES | 1 | |
| HS9562 | MECHANICAL PULLER - DIFFERENTIAL GEAR ASSEMBLY | 1 | |
| LTCT4680 | PULLER, MECHANICAL, 2.110-2.130 INCH | 1 | |
| LTCT7356-01 | PULLER, MECHANICAL-POWER OUTPUT SHAFT | 1 | |
| PWA101359 | PULLER-MECHANICAL,N1 TRANSDUCER PROBE | 2 | |
| PWA105784 | PULLER MECHANICAL - BLADE LOCK RETAINER | 1 | |
| PWA211137 | PULLER, MECHANICAL - IDG SHAFT SEAL FROM THE GEARBOX | 2 | |
| PWA211159 | PULLER, MECHANICAL - MAIN GEARBOX, OIL NOZZLE | 4 | |
| PWA211270 | PULLER, MECHANICAL - REMOVAL OF THE ANGLE GEARBOX | 1 | |
| PWA211774 | "PULLER, MECHANICAL - HYDRAULIC PUMP SHAFT SEAL | 3 | |
| PWA211775 | PULLER, MECHANICAL - IDG SHAFT SEAL FROM THE GEARBOX | 2 | |
| PWA80012 | PULLER, KNOCKER-GRBOX,IDGS DRIVE SEAL RETAINER (MECHANICAL) | 1 | |
| PWA80013 | PULLER,KNOCKER-GRBOX FUEL PUMP SEAL RETAINER (MECHANICAL) | 2 | |
| PWA80522 | PULLER,MECHANICAL-NO. 5 BEARING COVER | 1 | |
| PWA86081 | PULLER-MECHANICAL LPT BORESCOPE PLUG | 7 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
