| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| DRT66012 | PULL BAR | 2083 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 1408 | TRACTOR - BAGGAGE & CARGO - 8,000 LB DRAW BAR PULL | 1 | |
| 1410 | TRACTOR - BAGGAGE & CARGO 10,000 LB DRAWBAR PULL | 1 | |
| 2001382 | TOWBAR DESIGNED TO FIT THE BELL 206, OH-58 AND MD500 TYPES WITH SKID TUBE AFT OF CROSS TUBE FOR HOOK UP. HIS TOW BAR CAN ALSO BE USED FOR PULLING FROM THE FRONT AND IS VERY SIMILAR TO 002090 WITH THE EXCEPTION IT IS LONGER AND PULLS THE TAIL DOWN TO GET | 2083 | |
| 2001383 | Helicopter towbar designed as a special tow bar for towing the AS-350 helicopter from the rear.There are some helicopters with so much gear attached to the nose it is very difficult to pull them from the front without damage. This tow bar attaches to our | 1 | |
| 2001384 | towbar designed to fit the Bell 206, OH-58 and MD500 types with skid tube aft of cross tube for hook up. his tow bar can also be used for pulling from the front and is very similar to 002090 with the exception it is longer and pulls the tail down to get | 1 | |
| 2001385 | Helicopter REAR towbar designed to fit the Bell 206, OH-58 and MD500 types with skid tube aft of cross tube for hook up. his tow bar can also be used for pulling from the front and is very similar to 002090 with the exception it is longer and pulls the t | 1 | |
| 2ME65B19248 | PULLER SET - 4 BAR LINKAGE, TRAILING EDGE FLAP | 1 | |
| 2MIT65B03670-6 | PULLER BAR | 1 | |
| 2mit65b03670-9 | PULLER BAR ASSY | 1 | |
| 5965694-1 | Fixture，bar-cont column push-pull | 2 | |
| A27109-1 | BAR PULLER | 1 | |
| B400 | AIRCRAFT TOW TRACTOR - 30,000# DRAWBAR PULL; 40,000 GVW | 1 | |
| B600 | AIRCRAFT TOW TRACTOR - 48,000# DRAWBAR PULL; 60,000 GVW | 1 | |
| BJR1 | SUBARU BALL JOINT PULLER | 1 | |
| BT-345 | TRACTOR - CARGO - 3,000 TO 5,000 LB DRAW BAR PULL - DIESEL | 1 | |
| CJ2002 | PULLER SET BAR-TYPE | 1 | |
| CJ80A | PLR 7.5T BAR-TYPE A/C PULLEY | 1 | |
| CJ83C | PLR 3.5T BAR-TYPE PULLEY GEAR | 1 | |
| DRT66012 | TOOL PULL BAR | 1 | |
| DRT68281-4 | BAR-PULL | 1 | |
| DRT68281-5 | BAR-PULL | 1 | |
| DRT68776 | AXLE EXTRACTION PULL BAR | 2083 | |
| DT60E | TRACTOR - CARGO - DIESEL DRIVEN - AUTO TRANSMISSION - 6000 LB DRAW BAR PULL | 1 | |
| E54585 | BARREL PULLING FIXTURE | 1 | |
| EB-2 | TRACTOR - CARGO - 5,000 LB DRAW BAR PULL - COMMERCIAL TRUCK CHASSIS - DIESEL POWERED | 1 | |
| EB2-5 | TRACTOR - BOB TAIL - CARGO - 5,000 LB DRAW BAR PULL - COMMERCIAL TRUCK CHASSIS - AVAIL. IN GAS (EB2-5G) OR DIESEL POWER (EB2-5D) | 1 | |
| EB2-8 | TRACTOR - TOWING - BOB-TAIL - 8000 LB DRAW BAR PULL - COMMERCIAL TRUCK CHASSIS AVAIL WITH GASOLINE (EB2-8G) OR DIESEL (EB2-8D) | 1 | |
| F-6000-8 | TRACTOR - TOWING - BOB-TAIL - CARGO - 8000 LB DRAW BAR PULL - COMMERCIAL TRUCK CHASSIS | 1 | |
| F8000-8 | TRACTOR - CARGO - 8000 LB DRAW BAR PULL - DIESEL COMMERCIAL TRUCK CHASSIS | 1 | |
| GS12984 | ASSY BARREL HALF PULLE | 1 | |
| GT-35A | TRACTOR - TOW - 20,000 LB DRAW BAR PULL - 28,000 LB GROSS VEHICLE WEIGHT | 1 | |
| GT110 | TRACTOR - TOW - 72,000 DRAWBAR PULL - 90,000 GVW STANDARD (THE "STANDARD" IS NOT RECOMMENDED) - THE OPTIONAL 78,000 DRAWBAR PULL IS RECOMMENDED - 78,000 DRAW BAR PULL IS AVAILABLE AT 100K, 110K AND 120K GVW. 81.5" CAB HEIGHT | 1 | |
| GT30E | TRACTOR - BAGGAGE / CARGO - GAS DRIVEN - AUTO TRANSMISSION - 3,000 LB DRAW BAR PULL | 1 | |
| GT35 | TRACTOR - TOW - 28,000 LB DRAW BAR PULL - DIESEL - 35,000 LB GVW | 1 | |
| GT50 | TRACTOR - TOW - 40,000 LB DRAW BAR PULL - DIESEL POWERED | 1 | |
| GT50E | TRACTOR - CARGO - 5000 LB DRAW BAR PULL - GAS DRIVEN - AUTO TRANSMISSION | 1 | |
| GT50H | TRACTOR - TOW - 48,000 LB DRAW BAR PULL - 60,000 LB GVW - DIESEL POWERED | 1 | |
| GT60E | TRACTOR - CARGO - 6000 LB DRAW BAR PULL - GAS DRIVEN - AUTO TRANSMISSION | 1 | |
| HLE50 | TRACTOR - CARGO - 5000 LB DRAW BAR PULL - LOW PROFILE - ELECTRIC | 1 | |
| HRR198 | SUBARU CRANK PULLEY PULLER | 1 | |
| HS7031 | PULLER - BARREL HALF | 1 | |
| HSP272 | BARREL HALF PULLER | 1 | |
| HTA-30 | TRACTOR - CARGO - 3000 LB DRAW BAR PULL - GAS/DIESEL POWERED | 1 | |
| HTA-40 | TRACTOR - CARGO - 4000 LB DRAW BAR PULL - GAS/DIESEL POWERED | 1 | |
| HTA-50 | TRACTOR - CARGO - 5000 LB DRAW BAR PULL - GAS/DIESEL POWERED | 1 | |
| HTA-60 | TRACTOR - CARGO - 6000 LB DRAW BAR PULL - GAS/DIESEL POWERED | 1 | |
| HTA-80 | TRACTOR - CARGO - 8000 LB DRAW BAR PULL - GAS/DIESEL POWERED | 1 | |
| J47235 | PULLER FOR CONNECTING PIN OF NOSE LANDING GEAR ACTUATING CYLINDER ON BARREL | 1 | |
| M-30 | TRACTOR - CARGO - 3000 LB DRAW BAR PULL - GAS OR DIESEL POWERED | 1 | |
| M-40 | TRACTOR - CARGO - 4000 LB DRAW BAR PULL - GAS OR DIESEL POWERED | 1 | |
| M-50 | TRACTOR - CARGO - 5000 LB DRAW BAR PULL - GAS OR DIESEL POWERED | 1 | |
| M-60 | TRACTOR - CARGO - 6000 LB DRAW BAR PULL - GAS OR DIESEL POWERED | 1 | |
| MA40 | TRACTOR - CARGO - 4,000 LB DRAW BAR PULL | 1 | |
| MA40-1 | TRACTOR - CARGO - 4000 DRAW BAR PULL - GASOLINE POWERED | 1 | |
| MA40-13 | TRACTOR - CARGO - 4000 DRAW BAR PULL - DIESEL POWERED - STANDARD HEIGHT (FOR LOW PROFILE USE M1A SERIES) | 1 | |
| MA40-24 | TRACTOR - CARGO - 4000 DRAW BAR PULL - DIESEL POWERED - STANDARD HEIGHT (FOR LOW PROFILE USE M1A SERIES) | 1 | |
| MH50 | TRACTOR - CARGO - 4000 LB DRAW BAR PULL - BOBTAIL REAR DECK LOAD CAPACITY - 3000 LBS | 1 | |
| MODEL 100 | TRACTOR - TOWING - PULL OR PUSH BACK - 8,000 TO 12,000 LBS DRAWBAR PULL - GAS OR DIESEL | 1 | |
| MODEL 140 | TRACTOR - TOW - 8,000 TO 14,000 LB DRAW BAR PULL | 1 | |
| MODEL 200 | TRACTOR - TOW - 16,000 TO 35,000 LB DRAW BAR PULL - CUMMINS DIESEL POWERED | 1 | |
| MODEL 6006 | TRACTOR - BAGGAGE/CARGO - 6,000 LB DRAW BAR PULL | 1 | |
| PMXTOM450PRO | WHL BEARING PULLER FORD SUBARU | 1 | |
| RB 211 BORASCOPE PLUG PULLER | RB 211 BAROSCOPE PLUG PULLER | 1 | |
| SM-200 | TRACTOR - TOWING - TUG - 20,000 LB DRAW BAR PULL - WEIGHT 24,000 LB - GAS ENGINE | 1 | |
| SM-200C | TRACTOR - TOWING - 20,000 LB DRAW BAR PULL - CHRYSLER LH 318 GAS ENGINE | 1 | |
| SM-340F-5 | TUG - UTILITY 5,000 LB DRAW BAR PULL - REPLACES THE SM-50F | 1 | |
| SM-50F | TUG - UTILITY - 5000 LB DRAW BAR PULL | 1 | |
| SMLP-120D | TRACTOR - TOWING - 12,000 LB DRAW BAR PULL - WEIGHT 12,600 LB - JOHN DEERE 4239D DIESEL | 1 | |
| SMLP-120F | TRACTOR - TOWING - 12,000 LB DRAW BAR PULL - 19,200 LB GVW - FORD 300 GAS POWERPLANT | 1 | |
| SMLP-600D | TRACTOR - TOWING - 48,000 LB DRAW BAR PULL - WEIGHT 60,000 LB - CUMMINS DIESEL POWER | 1 | |
| ST7095GD-G-1 | BORING BAR MOTOR (PULL) | 1 | |
| ST991A-2-250 | PRY BAR (SCRIVET PULLER) | 2 | |
| T-350 | TRACTOR - TOW - 20,000 TO 35,000 LB DRAW BAR PULL - 30,000 TO 50,000 LB GVW - DIESEL POWERED | 1 | |
| TC-30 | TRACTOR - BAGGAGE / CARGO - AUTO TRANSMISSION - 3,000 LB DRAW BAR PULL SPECIFY GASOLINE, DIESEL, OR LPG ENGINE | 1 | |
| TC-50 | TRACTOR - CARGO - 6,000 LB DRAW BAR PULL - DUAL REAR WHEELS - GASOLINE ENGINE (DIESEL OR LPG ENGINE OPTIONAL) | 1 | |
| TC-60 | TRACTOR - BAGGAGE TRACTOR - 6,000 LB DRAW BAR PULL - DUAL REAR WHEELS - GASOLINE ENGINE (DIESEL OR LPG ENGINE OPTIONAL) | 1 | |
| TC-80 | TRACTOR, AIRCRAFT TOWING TC-80 = 8,000 LB DRAW BAR PULL - 9,300 LB GVW - GAS OR DIESEL POWERPLANT | 1 | |
| TG-200C | AIRCRAFT TOW TRACTOR - 20,000 DRAWBAR PULL - WEIGHT 24,000 LB - FORD GASOLINE ENGINE | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
