| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 0319402980 | PT SHAFT | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 23058405 | DIMPLE TOOL, CUP WASHER LOCK, LPT REAR SHAFT | 1 | |
| 00711011N | SHAFT ADAPTER | 1 | |
| 02-141 | Threaded Shank Micro-Stop Countersink Cage (Maximum capacity: 5/8") (Shaft travel: 3/32") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Add to cart: Add To Cart) | 1 | |
| 02-1530 | Jumbo Micro-Stop Countersink Cages (Maximum capacity: 1") (Shaft travel: 1/2") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Add to cart: Add To Cart) | 1 | |
| 02-1533 | Jumbo Micro-Stop Countersink Cages (Maximum capacity: 1") (Shaft travel: 1/2") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Add to cart: Add To Cart) (Maximum capacity: 1-1/4") (Shaft travel: 1/2") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Add to | 1 | |
| 02-2351B-A | Self Aligning Countersink Cages (Throat depth: 1/4"-28 Countersink Thread) (Capacity: 7/8") (Shaft travel: 0.340") (Depth adjustment: 0.001") (Maximum rpm: 5000) (Add to cart: Add To Cart) | 1 | |
| 02-241 | Mini Micro-Stop Countersink Cage (Maximum capacity: 7/16") (Shaft travel: 1/4") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Add to cart: Add To Cart) | 1 | |
| 02-284 | Extended Footpiece Micro-Stop Countersink Cage (Maximum capacity: 3/8") (Shaft travel: 5/16") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Footpiece extension: 2-3/4") (Add to cart: Add To Cart) | 1 | |
| 02-284-4 | Extended Footpiece Micro-Stop Countersink Cage (Maximum capacity: 3/8") (Shaft travel: 5/16") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Footpiece extension: 2-3/4") (Add to cart: Add To Cart) (Maximum capacity: 3/8") (Shaft travel: 5/16") (Depth adj | 1 | |
| 02-284-D | Extended Footpiece Micro-Stop Countersink Cage (Maximum capacity: 3/8") (Shaft travel: 5/16") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Footpiece extension: 2-3/4") (Add to cart: Add To Cart) (Maximum capacity: 3/8") (Shaft travel: 5/16") (Depth adj | 1 | |
| 02-441 | Micro-Stop Countersink Cage (Maximum capacity: 5/8") (Shaft level: 5/16") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Footpiece type: Plastic) (Add to cart: Add To Cart) | 3 | |
| 02-441FBACR15FT | Boeing® BACR15FT Micro-Stop Countersink Cages (Type: Standard Skirt Model) (Capacity: 5/8") (Shaft travel: 5/16") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Add to cart: Add To Cart) | 1 | |
| 02-441FBACR15FT-1 | Boeing® BACR15FT Micro-Stop Countersink Cages (Type: Standard Skirt Model) (Capacity: 5/8") (Shaft travel: 5/16") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Add to cart: Add To Cart) (Type: Standard Skirt Model) (Capacity: 5/8") (Shaft travel: 5/16") | 1 | |
| 02-441S | Micro-Stop Countersink Cage (Maximum capacity: 5/8") (Shaft level: 5/16") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Footpiece type: Plastic) (Add to cart: Add To Cart) (Maximum capacity: 5/8") (Shaft level: 5/16") (Depth adjustment: 0.001") (Maximum | 1 | |
| 02-441SBACR15FT | Boeing® BACR15FT Micro-Stop Countersink Cages (Type: Standard Skirt Model) (Capacity: 5/8") (Shaft travel: 5/16") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Add to cart: Add To Cart) (Type: Standard Skirt Model) (Capacity: 5/8") (Shaft travel: 5/16") | 1 | |
| 02-441SBACR15FT-1 | Boeing® BACR15FT Micro-Stop Countersink Cages (Type: Standard Skirt Model) (Capacity: 5/8") (Shaft travel: 5/16") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Add to cart: Add To Cart) (Type: Standard Skirt Model) (Capacity: 5/8") (Shaft travel: 5/16") | 1 | |
| 02-551 | Full Flange Skirt Micro-Stop Countersink Cage (Maximum opening: 5/8") (Shaft travel: 5/16") (Depth adjustment: 0.001") (Maximum rpm: 10000) (Add to cart: Add To Cart) | 1 | |
| 10C1025G010 | SUPPORT, PEDESTAL - ENGINE HANDLING (HPTR EXT SHAFT) | 1 | |
| 10C1025G05 | SUPPORT, PEDESTAL - ENGINE HANDLING (HPTR EXT SHAFT) | 1 | |
| 10C1083 | EXTENSION - SHAFT - HPT ROTOR | 1 | |
| 10C1083G01 | EXTENSION SHAFT - HPT ROTOR | 1 | |
| 10C1105G02 | ADAPTER, TORQUE, COUPLING NUT - FAN MAINTENANCE UNIT TO FAN MID SHAFT (TORQUE ADAPTER) | 1 | |
| 10C1106G02 | FIXTURE, GUIDE LPT SHAFT (TORPEDO) (GUIDE FIXTURE) | 1 | |
| 10C1224G01 | FIXTURE, CENTERING - LPT SHAFT (CENTERING FIXTURE) | 1 | |
| 10C1245 | HEATER - HPTR AFT SHAFT (220V) | 1 | |
| 10C1245G01 | HEATER, HPT ROTOR SHAFT (USED WITH 9470M56G01) (110 VAC, 60HZ) (HEATER) | 1 | |
| 11C3129 | ADAPTER - TORQUE FAN SHAFT EXTERNAL NUT AND SENSOR - SHAFT NUT | 1 | |
| 11C3129G03 | ADAPTER, TORQUE FAN SHAFT EXTERNAL NUT AND SENSOR, SHAFT NUT | 1 | |
| 11C3282 | FIXTURE - GUIDE - LPT SHAFT / TCF | 1 | |
| 11C3283 | FIXTURE - EXTENSION - LPT MID SHAFT | 1 | |
| 11C3296 | PROTECTOR - THREAD/SPLINE - LPT SHAFT - FORWARD | 1 | |
| 11C3327 | FIXTURE - GUIDE - LPT MIDSHAFT EXTENSION | 1 | |
| 11C3515 | ADAPTER - THREAD - LPT CONE SHAFT | 1 | |
| 11C3524 | CAP - LIFT-LPT CONE SHAFT AFT | 1 | |
| 11C3531 | FIXTURE - LIFT TURN-LPT CONE SHAFT FWD (USA) | 1 | |
| 11C3603 | ADAPTER TOOL SHAFT MID FAN | 1 | |
| 11C4368 | FIXTURE, GUIDE - LPT MIDSHAFT EXTENSION | 1 | |
| 11C4565 | ADAPTER - TORQUE LPT SHAFT TO ELECTRONIC | 1 | |
| 11C4654 | LPT SHAFT I/R FIXTURE | 1 | |
| 1864M90P04 | SHAFT HPT REAR | 1 | |
| 18903010000 | SHAFT ADAPTER | 1 | |
| 1C6001 | FIXTURE, HOLDING - PT ROTOR FORWARD SHAFT | 1 | |
| 1C6807 | BRACKET SET, ADAPTER-LPTR AFT SHAFT TO 2C6001G01 | 1 | |
| 1C6807G01 | ADAPTER BRACKETS, AFT SHAFT - PT ROTOR | 1 | |
| 1C6837 | WRENCH SET, INSTALL & REMOVE LPTR FD SHAFT PLUG | 1 | |
| 1C6846 | WRENCH, SPANNER-RETAINER NUT, LPT AFT SHAFT | 1 | |
| 1C6923 | FIXTURE SET, MASKING - PT ROTOR SHAFT | 1 | |
| 1C8344 | PULLER, SHAFT- FORWARD ADAPTER | 1 | |
| 1C8344G01 | Puller Shaft - Forward Adapter, LPT | 1 | |
| 1C9186 | ADAPTER, SLEEVE-LP TURB ROTOR SHAFT | 1 | |
| 1C9309G01 | FIXTURE, TORQUE - LPT SHAFT COUPLING NUT | 1 | |
| 1C9309G03 | FIXTURE, TORQUE LPT SHAFT COUPLING NUT | 1 | |
| 1C9311G02 | FIXTURE, SEAT CHECK - COUPLING NUT, SHAFT,LPT ROTOR | 1 | |
| 1C9316G01 | ADAPTER, SLEEVE - LPT ROTOR SHAFT | 1 | |
| 1C9316G02 | Adapter, Sleeve LPT Rotor Shaft | 1 | |
| 1C9318G01 | FIXTURE, INSTALL/REMOVE - RETAINER RING LPT/MID SHAFT | 1 | |
| 1C9327G01 | PULLER, LPT MODULE - MID SHAFT | 1 | |
| 1C9327G03 | Puller, LPT Module - Mid Shaft | 1 | |
| 1C9617G01 | Fixture, Start LPT Shaft Coupling Nut | 1 | |
| 1C9618G01 | Fixture, Install/Remove - Retainer Ring LPT/Mid-Shaft | 1 | |
| 1C9619 | FIXTURE - TORQUE-LPT SHAFT CO NUT | 1 | |
| 1C9619G01 | Fixture, Torque LPT Shaft Coupling | 1 | |
| 1C9620G01 | Gage Inspection - Fan Shaft To Hpt Stator Case | 1 | |
| 1J12433 | MASTER, SHAFT SETTING - HOUSING, PTO CENTER BRG, INTERMEDIATE | 1 | |
| 1M14004 | LPT SHAFT HOLDER | 1 | |
| 20-720 | Thin Offset Angle Drill Attachments (Description: Straight - 3/8" Offset Thickness) (H' overall height: 1-1/8" (29 mm)) (L1' shaft offset: 2-7/16" (62 mm)) (L2' overall length: 3-3/16" (81 mm)) (Add to cart: Add To Cart) | 1 | |
| 20-725 | Thin Offset Angle Drill Attachments (Description: Straight - 3/8" Offset Thickness) (H' overall height: 1-1/8" (29 mm)) (L1' shaft offset: 2-7/16" (62 mm)) (L2' overall length: 3-3/16" (81 mm)) (Add to cart: Add To Cart) (Description: Straight - 3/8" Offs | 1 | |
| 20-730 | Thin Offset Angle Drill Attachments (Description: Straight - 3/8" Offset Thickness) (H' overall height: 1-1/8" (29 mm)) (L1' shaft offset: 2-7/16" (62 mm)) (L2' overall length: 3-3/16" (81 mm)) (Add to cart: Add To Cart) (Description: Straight - 3/8" Offs | 1 | |
| 20-735 | Thin Offset Angle Drill Attachments (Description: Straight - 3/8" Offset Thickness) (H' overall height: 1-1/8" (29 mm)) (L1' shaft offset: 2-7/16" (62 mm)) (L2' overall length: 3-3/16" (81 mm)) (Add to cart: Add To Cart) (Description: Straight - 3/8" Offs | 1 | |
| 20-745 | Thin Offset Angle Drill Attachments (Description: Straight - 3/8" Offset Thickness) (H' overall height: 1-1/8" (29 mm)) (L1' shaft offset: 2-7/16" (62 mm)) (L2' overall length: 3-3/16" (81 mm)) (Add to cart: Add To Cart) (Description: Straight - 3/8" Offs | 1 | |
| 20-755 | Thin Offset Angle Drill Attachments (Description: Straight - 3/8" Offset Thickness) (H' overall height: 1-1/8" (29 mm)) (L1' shaft offset: 2-7/16" (62 mm)) (L2' overall length: 3-3/16" (81 mm)) (Add to cart: Add To Cart) (Description: Straight - 3/8" Offs | 1 | |
| 20-820 | Thin Offset Angle Drill Attachments (Description: Straight - 3/8" Offset Thickness) (H' overall height: 1-1/8" (29 mm)) (L1' shaft offset: 2-7/16" (62 mm)) (L2' overall length: 3-3/16" (81 mm)) (Add to cart: Add To Cart) (Description: Straight - 3/8" Offs | 1 | |
| 20-825 | Thin Offset Angle Drill Attachments (Description: Straight - 3/8" Offset Thickness) (H' overall height: 1-1/8" (29 mm)) (L1' shaft offset: 2-7/16" (62 mm)) (L2' overall length: 3-3/16" (81 mm)) (Add to cart: Add To Cart) (Description: Straight - 3/8" Offs | 1 | |
| 20-830 | Thin Offset Angle Drill Attachments (Description: Straight - 3/8" Offset Thickness) (H' overall height: 1-1/8" (29 mm)) (L1' shaft offset: 2-7/16" (62 mm)) (L2' overall length: 3-3/16" (81 mm)) (Add to cart: Add To Cart) (Description: Straight - 3/8" Offs | 3 | |
| 20-835 | Thin Offset Angle Drill Attachments (Description: Straight - 3/8" Offset Thickness) (H' overall height: 1-1/8" (29 mm)) (L1' shaft offset: 2-7/16" (62 mm)) (L2' overall length: 3-3/16" (81 mm)) (Add to cart: Add To Cart) (Description: Straight - 3/8" Offs | 1 | |
| 20-845 | Thin Offset Angle Drill Attachments (Description: Straight - 3/8" Offset Thickness) (H' overall height: 1-1/8" (29 mm)) (L1' shaft offset: 2-7/16" (62 mm)) (L2' overall length: 3-3/16" (81 mm)) (Add to cart: Add To Cart) (Description: Straight - 3/8" Offs | 1 | |
| 20-855 | Thin Offset Angle Drill Attachments (Description: Straight - 3/8" Offset Thickness) (H' overall height: 1-1/8" (29 mm)) (L1' shaft offset: 2-7/16" (62 mm)) (L2' overall length: 3-3/16" (81 mm)) (Add to cart: Add To Cart) (Description: Straight - 3/8" Offs | 1 | |
| 2024047-1 | Shaft Adapter | 1 | |
| 2024825-1 | Shaft Adapter | 1 | |
| 2048M21P03 | SHAFT HPT FRONT | 1 | |
| 21C7439P01 | GAS GENERATOR SHAFT TIE-BOLTS RESTRAINING ADAPTER | 1 | |
| 21C7714G01 | OUTPUT SHAFT ASSEMBLY INSPECTION ADAPTER | 1 | |
| 21C7739G01 | PT SHAFT STABILIZER | 1 | |
| 21C7863P01 | TAB INSPECTION AND SETTING FIXTURE, PT SHAFT | 1 | |
| 2895071 | ADAPTOR-TORQUE WRENCH,APU G/SHAFT | 2 | |
| 23005426 | Guide â Spur Adapter, Gear shaft | 4 | |
| 23006764 | GAGE-RETAINING RING, SPUR ADAPTER GEAR SHAFT | 2 | |
| 23006778 | GUIDE BEARING SPUR ADAPTER GEARSHAFT (PM) | 5 | |
| 23006778- | GUIDE BEARING SPUR ADAPTER GEARSHAFT (PM) | 5 | |
| 23006784 | SPUR ADAPTER SHAFT GUIDE | 2 | |
| 23052530 | Adapter – Drive, Starter Shaft, PU Access Drive | 2 | |
| 23053556 | DIMPLE TOOL, CUP WASHER LOCK, LPT REAR SHAFT | 1 | |
| 23053681 | Fixture – Assembly Wheel 1st Stage, Forward & Aft Shaft, LPT Rotor | 1 | |
| 23053688 | Ring - Cryogenic, 2nd Stage Wheel Forward Shaft, LPT Rotor | 1 | |
| 23054756 | Puller – Wheel Assembly, LPT Rotor, 2nd Stage, Wheel Assembly From Aft Shaft | 1 | |
| 23054761 | Pusher - 1st Stage Wheel Assembly From Aft Shaft, LPT Rotor | 1 | |
| 23054762 | Adapter – Support, Long Shaft to Pedestal | 1 | |
| 23055726 | DIMPLE TOOL, CUP WASHER LOCK, LPT REAR SHAFT | 1 | |
| 23058497 | Adapter – Compressor Forward Shaft Holding | 1 | |
| 23060716 | DIMPLE TOOL, CUP WASHER LOCK, LPT REAR SHAFT | 1 | |
| 23068615 | Adapter – Support, Compressor Rotor, Forward Shaft | 1 | |
| 23083918 | TOOL: PUSHER,LIP SEAL, PTO SHAFT | 1 | |
| 269A9291 | Wrench Adapter Preload Ls Shaft | 2 | |
| 269T9211-003 | Drive Shaft Coupling Adapter Spanner Wrench | 1 | |
| 289539-1 | ADAPTER BALANCING SHAFT | 1 | |
| 289540-1 | ADAPTER SHAFT RETAINING | 1 | |
| 289558-1 | ADAPTER THRUST SHAFT AND BEARING | 1 | |
| 291189-1 | BUTTERFLY SHAFT ADAPTER | 1 | |
| 291615-1 | ADAPTER ASSY ALTERNATOR PLUG DRIVE SHAFT | 1 | |
| 291993-1 | BALANCING GEARSHAFT ADAPTER ASSEMBL | 1 | |
| 294866-6 | BEARING REMOVAL ADAPTER (LOCATES LARGER INSIDE DIAMETER OF 3860180-2 SPUR GEARSHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPUR GEARSHAFT FROM 3605094-1 BEARING | 1 | |
| 294891-1 | DRIVEN COMPRESSOR HOLDER ADAPTER (TO FIT SHAFT OF 294886-1 ROTATING ASSEMBLY HOLDER THAT WILL LOCATE THE INSIDE DIAMETER OF 3822075-2 MAIN SHAFT) | 1 | |
| 294896-1 | TORQUE WRENCH ADAPTER (TO TORQUE 3822056-1 NUT ON 38220752 MAIN SHAFT) | 1 | |
| 297641-1 | ADAPTER, SHAFT, STRETCH | 1 | |
| 297642-2 | ADAPTER, SHAFT, STRETCHING | 1 | |
| 298062-11 | INSTALLER, STARTER SHAFT SPLINE ADAPTER | 1 | |
| 298062-13 | REMOVER,STARTER SHAFT SPLINE ADAPTER | 1 | |
| 298262-1 | Oil Pump Assembly Adapter And Shaft Assembly | 1 | |
| 298341-1 | ADAPTER, SHAFT, OIL PUMP TEST | 1 | |
| 2C14027G02 | PULLER, HPT ROTOR/DUMMY SHAFT | 2 | |
| 2C14028G01 | PUSHER, HPT ROTOR DUMMY SHAFT | 2 | |
| 2C14093 | ADAPTOR, TORQUE,COUPLING NUT-LPT MID SHAFT | 1 | |
| 2C14093G03 | ADAPTOR, TORQUE,COUPLING NUT-LPT MID SHAFT | 6 | |
| 2C14093P13 | COUPLING NUT WRENCH-LPT MID SHAFT | 1 | |
| 2C14113G01 | FIXTURE, INSTALL AND REMOVE-COMP.ROTOR FWD. SHAFT SPLINE ADAPTER | 3 | |
| 2C14131G01 | FIXTURE, SEATING CHECK - HPTR (WITH FAN AND MID SHAFT OUT - VERTICAL) | 1 | |
| 2C14131G02 | FIXTURE, SEATING CHECK - HPTR (WITH FAN AND MID SHAFT INSTALL) | 4 | |
| 2C14199P102 | BEARING ADAPTOR SHAFT | 1 | |
| 2C14204G02 | FIXTURE, LIFT-HPTR STG.11-14 SPOOL/SHAFT | 2 | |
| 2C14222G01 | hpt rotor shaft | 4 | |
| 2C14252G01 | HPTR ROTOR DISK/SHAFT LAPPING TOOL | 1 | |
| 2C14254G01 | DUMMY SHAFT SET COMPR/HPT ROTOR | 1 | |
| 2C14276 | GAGE, INSPECT. FAN SHAFT TO HPT STATOR CASE | 1 | |
| 2C14276 REV A | GAGE, INSPECT. FAN SHAFT TO HPT STATOR CASE | 1 | |
| 2C14276G01 | GAGE INSPECTION - FAN SHAFT TO HPT STATOR CASE | 1 | |
| 2C14276G01TK | GAGE, INSPECTION-FAN SHAFT TO HPT STATOR CASE | 1 | |
| 2C14624G01 | LIFT-LPT SHAFT | 1 | |
| 2C14624G01TK | FIXTURE, LIFT/TURN-LPT SHAFT-AFT | 1 | |
| 2C14704G05 | TOOL SET, DUMMY SHAFT HPT ROTOR | 1 | |
| 2C14704G06 | COUPLING NUT-DUMMY SHAFT COMPRESSOR OR HPT ROTOR | 2 | |
| 2C18008G01 | PUSHERPULLER,LPT SHAFT HORZ MAINT ONLY | 1 | |
| 2C18011G01 | GUIDE - LPT SHAFT | 1 | |
| 2C18016 | SHAFT DUMMY LPT | 1 | |
| 2C18040G02 | PULLER ASSEMBLY, REMOVE - PLUG, LPT SHAFT (PULLER ASSEMBLY) | 1 | |
| 2C18084G01 | FIXTURE,GUIDE, IR, LPT SHAFT, AFT | 1 | |
| 2C5241 | ADAPTER FAN SHAFT LOCKNUT | 1 | |
| 2C5241G01 | ADAPTER, FAN SHAFT LOCKNUT TORQUE | 1 | |
| 2C5886G01 | TRUNION - DRIVE SHAFT LPT | 1 | |
| 2C6011G03 | SLING, LIFT-FAN/LPT MID SHAFT | 2 | |
| 2C6096 | GAGE,INSP-LPT ROTOR TO FAN SHAFT | 1 | |
| 2C6173 | ADAPTER, TORQUE, SEAL NUT - COMPR REAR SHAFT | 1 | |
| 2C6195 | FIXTURE,LIFT-HPT ROTOR SHAFT A | 1 | |
| 2C6195G01 | FIXTURE,LIFT-HPT ROTOR SHAFT A | 1 | |
| 2C6363G01 | ADAPTERS, PEDESTAL - FAN MIDSHAFT | 1 | |
| 2C6363G01TK | ADAPTERS, PEDESTAL-FAN MID SHAFT | 1 | |
| 2C6I73 | ADAPTER, TORQUE, SEAL NUT - COMPR REAR SHAFT | 1 | |
| 2C81011 | ADAPT, HOIST DR SHAFT FAN CF34 | 1 | |
| 2C81011G01 | ADAPTER, FAN DRIVE SHAFT HOIST | 1 | |
| 2C81046G01 | ADAPTER, LPT-TO-FAN DRIVE SHAFT | 2 | |
| 2C81103 ADA | ADAPTER - TORQUE - LOCKNUT - FAN TO FAN DRIVESHAFT | 1 | |
| 2C81464G01 | ADAPTER TORQUE HPTLOCKNUT FAN DRIVE SHAFT | 1 | |
| 2C91046G01 | ADAPTER, COMPRESSOR ROTOR REAR SHAFT HOIST | 1 | |
| 2C91050G01 | ADAPTER - FAN SHAFT | 1 | |
| 2C91061G01 | LPT FAN SHAFT SNAP RING | 1 | |
| 2C91074G01 | ADAPTER - FAN DRIVE SHAFT | 1 | |
| 2C91105 | SHAFT - HPT ROTOR BAL EXT | 1 | |
| 2C91105P01 | SHAFT EXTENSION HPT | 1 | |
| 2C91161 | DRIVE SHAFT-LPT RTR BALANCE | 1 | |
| 2C91177P01 | PUSHER-GEARSHAFT PTO | 1 | |
| 2F10321 | FIXTURE CHECKING AXIAL POSITION LPT SHAFT | 1 | |
| 30R0157G01 | BAR SUPPORT - PT SHAFT | 1 | |
| 340-074-723-0 | LPT SHAFT | 1 | |
| 35889 | Adaptor - grease gun flap shaft joints | 1 | |
| 365A93-3100-00 | ROTOR SHAFT NUT ADAPTOR | 1 | |
| 365A93310000 | ROTOR SHAFT NUT ADAPTOR | 1 | |
| 38-2911 | Full Flange Skirt Micro-Stop Countersink Cage (Maximum opening: 5/8") (Shaft travel: 5/16") (Depth adjustment: 0.001") (Maximum rpm: 10000) (Add to cart: Add To Cart) (Maximum opening: -) (Shaft travel: -) (Depth adjustment: -) (Maximum rpm: -) (Optional | 1 | |
| 393-192-01 | Outside (opt) ME, Shaft Twist | 1 | |
| 3C3420G03 | GAGE, INSPECTION-FAN ROTOR TO LPT, SHAFT EATING | 1 | |
| 3SF6141-501 | LPT. SHAFT PULLER | 1 | |
| 550T05862-401 | ADAPTER ASSY FLEXIBLE SHAFT | 1 | |
| 6610-20560-01-T | SHAFT (ADAPTER) | 1 | |
| 6795984 | HOLDER, PT SHAFT | 2 | |
| 6795985 | WRENCH, PT SHAFT BEARING RETAINING NUT | 2 | |
| 6795990 | DUMMY BEARING, PT SHAFT, FRONT | 2 | |
| 6796265 | PULLER - TURB COUPLING SHAFT ADAPTER | 1 | |
| 6796359 | ADAPTER - HOLDING, NO. 60 PROPELLER SHAFT | 4 | |
| 6796568 | ADAPTER - TORQUE, COORDINATOR CONTROL SHAFT | 2 | |
| 6796651 | PROP SHAFT SEAL ADAPTER | 2 | |
| 6797175 | PULLER - TURBINE COUPLING SHAFT ADAPTER | 1 | |
| 6797179 | DRIFT - TURBINE COUPLING SHAFT ADAPTER | 1 | |
| 6797236 | ADAPTER, HOLDING, #60 PROPELLER SHAFT | 1 | |
| 6797313 | ADAPTER TORQUE CO-ORDINATOR CONTROL SHAFT | 1 | |
| 6798981 | ADAPTER PROPELLER SHAFT SPLINED | 1 | |
| 6872646 | GUIDE一SPUR ADAPTER GEARSHAFT BEARING | 2 | |
| 6893501 | DRIFT - SPUR ADAPTER GEARSHAFT | 1 | |
| 6893503 | GAGE--SPLINE, SPUR ADAPTER GEARSHAFT AND SECOND-STAGE SPLINED ADAPTER CHECKING | 2 | |
| 460004750 | MLG TORQUE SHAFT ADAPTOR | 2 | |
| 833978-5 | BEARING REMOVAL ADAPTER (LOCATES IN SMALLER INSIDE DIAMETER OF 3860180-2 SPUR GEAR SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPUR GEAR FROM 3605094-1 BEARING) | 1 | |
| 833978-9 | BEARING REMOVAL ADAPTER (LOCATES IN SMALLER INSIDE DIAMETER OF 3860167-1 SPLINED SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPLINED SHAFT FROM 892575-1 BEARING) | 1 | |
| 834415-1 | SHAFT ADAPTER | 1 | |
| 834415-2 | SHAFT ADAPTER | 1 | |
| 834415-3 | Shaft Adapter | 1 | |
| 834415-4 | Shaft Adapter | 1 | |
| 834415-4PM | SHAFT ADAPTER | 1 | |
| 834645-1 | SET ADAPTOR MAINTENANCE SHAFT | 2 | |
| 83820100 | SCREWSHAFT HOLDING ADAPTOR | 1 | |
| 83820102 | SCREWSHAFT HOLDING ADAPTOR | 1 | |
| 856A 2349G02 | DOLLY FOR LPT SHAFT DIASSEM./ASSEM. | 8 | |
| 856A 2362G01 | SECTOR TOOL SET-LPT SHAFT REMOVAL/INSTALATION | 4 | |
| 856A 2370G05 | DIFFUSER HEAT LPT SHAFT | 1 | |
| 856A 2567G02 | EYE LIFT LPT. SHAFT | 7 | |
| 856A 2634G01 | DOLLY STORAGE& ASSEM./DISASSEM. LPT SHAFT | 9 | |
| 856A 2711G01 | FIXTURECENTER LPT SHAFT | 11 | |
| 856A 2758G02 | FIXTURE CENTERING LPT. SHAFT | 6 | |
| 856A 3485P01 | CAP PROTECTIVE THREAD LPT. SHAFT | 6 | |
| 856A-1219-G02 | Heater, HPT Aft Shaft | 4 | |
| 856A-2616-G01 | Sector, Centering, LPT Shaft | 5 | |
| 856A1041G | FIXTURE CENTERING LPT SHAFT TO LPT | 1 | |
| 856A1198 | PULLER, AFT SHAFT - HPT ROTOR | 1 | |
| 856A1198 G01 | Puller Aft Shaft ‐ HPT Rotor (puller) | 8 | |
| 856A1198G01 | Puller, Aft Shaft - HPT Rotor (puller) | 8 | |
| 856A1213 | PIN SET HPTR DISK TO AFT SHAFT | 1 | |
| 856A1213G01 | Pin Set, Alignment - HPT Rotor Disk to Shaft | 10 | |
| 856A1219 | HEATER HPT AFT SHAFT (220V-50HZ) | 1 | |
| 856A1219G02 | HEATER, HPT AFT SHAFT (110V/60HZ) (SHAFT HEATER) | 4 | |
| 856A1219G03 | HEATER, HPT AFT SHAFT (220V/50HZ) (SHAFT HEATER) | 1 | |
| 856A1219G04 | HEATER, HPT AFT SHAFT (SHAFT HEATER) | 1 | |
| 856A1219G05 | HEATER AND RING ON HPT AFT SHAFT | 2 | |
| 856A1221G01 | HEATER AND RING ON HPT AFT SHAFT | 16 | |
| 856A1409 | FIXT TORQUE HPTR FWD SHAFT AFT BOLT | 1 | |
| 856A1409G01 | FIXT TORQUE HPTR FWD SHAFT AFT BOLT | 2 | |
| 856A1409G02 | FIXT TORQUE HPTR FWD SHAFT AFT BOLT | 5 | |
| 856A1454 | TOOL SHAFT SUPT HPTR HORIZ | 1 | |
| 856A1454G01 | TOOL SHAFT SUPT HPTR HORIZ | 11 | |
| 856A1492 | FIXTURE, REMOVAL - HPT FORWARD SHAFT BOLTS (REMOVAL FIXTURE) | 1 | |
| 856A1492G01 | Fixture Rem HPTR Fwd Shaft | 1 | |
| 856A1492G02 | Fixt Rem HPTR Fwd Shaft Bolts | 7 | |
| 856A1508G01 | HPT REAR SHAFT HEATER | 1 | |
| 856A1838 | FIXTURE, PULLER HPT FWD SHAFT | 1 | |
| 856A1838G01 | FIXTURE, PULLER HPT FWD SHAFT (SEAL) | 4 | |
| 856A1883G02 | FIXTURE, ALIGNMENT-HORIZ, LPT SHAFT | 1 | |
| 856A1889G01 | HEATER, DOUBLE HPT AFT SHAFT | 6 | |
| 856A1899G02 | HEATER, HPT AFT SHAFT (SHAFT HEATER) | 1 | |
| 856A2010 G01 | FIXTURE, REMOVAL - HPT FORWARD SHAFT | 1 | |
| 856A2010G01 | HPT FORWARD SHAFT REMOVAL FIXTURE | 1 | |
| 856A211 | FIXTURE, CENTERING LPT SHAFT MODULE | 1 | |
| 856A211 REV B | FIXTURE, CENTERING LPT SHAFT MODULE | 1 | |
| 856A2308G01 | FIXTURE, ALIGNMENT - BOOSTER TO LPT SHAFT | 1 | |
| 856A2308G02 | FIXTURE, ALIGNMENT - BOOSTER TO LPT SHAFT (ALIGNMENT FIXTURE) | 9 | |
| 856A2310 | FIXTURE, ALIGNMENT - BOOSTER TO LPT SHAFT GUIDE | 1 | |
| 856A2310G01 | ALIGNMENT FIXTURE - BOOSTER/LPT SHAFT | 1 | |
| 856A2310G02 | ALIGNMENT FIXTURE - BOOSTER/LPT SHAFT | 10 | |
| 856A2311 | TUBE, DUMMY - LPT SHAFT FORWARD END. | 1 | |
| 856A2311G01 | TUBE, DUMMY - LPTR SHAFT FORWARD END (DUMMY TUBE) | 6 | |
| 856A2315G02 | SECTOR CENTER LPT SHAFT FWD | 1 | |
| 856A2349 | DOLLY STORE-ASSY/DISASSY LPT SHAFT | 1 | |
| 856A2349G02 | DOLLY, ASSEMBLY/DISASEMBLY AND STORAGE-LPT SHAFT | 8 | |
| 856A2359G01 | FIXTURE B/U LPT SHAFT TO LPT | 1 | |
| 856A2362G01 | LPT SHAFT REM/INSTALL ADAPTOR - CFM56-5 | 4 | |
| 856A2364G01 | FIXTURE ALIGHNMENT-TPT.OR.TF.TO LPT SHAFT | 2 | |
| 856A2365 | GUIDE, ALIGNMENT- TURBINE FRAME TO LPT SHAFT | 1 | |
| 856A2365G01 | GUID ALIGHNMENT-TF.TO LPT SHAFT | 2 | |
| 856A2370G05 | DIFFUSER HEAT LPT SHAFT | 1 | |
| 856A2513 | TUBE, DUMMY LPT SHAFT FWD END. | 1 | |
| 856A2513 G03 | Tube Dummy ‐ LPT Shaft Forward End | 1 | |
| 856A2513 G04 | TUBE, DUMMY-LPT SHAFT FORWARD END | 5 | |
| 856A2513G03 | TUBE DUMMY - LPT SHAFT FORWA | 1 | |
| 856A2513G04 | Dummy LPT Shaft | 5 | |
| 856A2521G02 | FIXTURE, ALIGNMENT - BOOSTER/LPT SHAFT (ALIGNMENT FIXTURE) | 6 | |
| 856A2526G03 | GUIDE, ALIGNMENT - LPT SHAFT (ALIGNMENT GUIDE) | 3 | |
| 856A2540 | Fixture Build-up LPT Shaft Module to LPT Module | 1 | |
| 856A2540G04 | FIXTURE, B/U - LPT SHAFT MODULE TO | 7 | |
| 856A2543 | CENTERING FIXTURE - LPT SHAFT MODULE | 2 | |
| 856A2543 G02 | Fixture Centering ‐ LPT Shaft Module | 7 | |
| 856A2543G02 | CENTERING FIXTURE - LPT SHAFT | 7 | |
| 856A2548 | STORAGE DOLLY - LPT SHAFT | 1 | |
| 856A2548G01 | STORAGE DOLLY - LPT SHAFT | 4 | |
| 856A2567 | LIFTING EYE - FWD LPT SHAFT | 1 | |
| 856A2567 G01 | Eye Lifting ‐ LPT Shaft Forward | 8 | |
| 856A2567G01 | EYE LIFTING LPT SHAFT FORWARD | 8 | |
| 856A2567G02 | LIFTING EYE - FWD LPT SHAFT | 7 | |
| 856A2568 | LIFTING EYE - AFT LPT SHAFT | 1 | |
| 856A2568 G01 | Ring Lift LPT Shaft AFT | 9 | |
| 856A2568G01 | Eye, Lifting - LPT Shaft Module, Aft | 9 | |
| 856A2569 | SUPPORT, CENTERING - LPT SHAFT FORWARD | 1 | |
| 856A2569G01 | SUPPORT, CENTERING - LPT SHAFT FORWARD | 1 | |
| 856A2573 | LPT SHAFT PLUG PULLER | 2 | |
| 856A2573G01 | ADAPTOR PULL LP SHAFT PLUG | 6 | |
| 856A2600 | LPT shaft guide& Stop tool | 1 | |
| 856A2600 G03 | LPT SHAFT GUIDE AND STOP TOOL | 1 | |
| 856A2600G01 | LPT Shaft Guide | 1 | |
| 856A2600G02 | LPT Shaft Guide | 1 | |
| 856A2600G03 | LPT Shaft Guide | 1 | |
| 856A2600G04 | LPT Shaft Guide | 1 | |
| 856A2600G05 | LPT SHAFT GUIDE AND STOP TOOL | 2 | |
| 856A2600G06 | LPT SHAFT GUIDE AND STOP TOOL | 3 | |
| 856A2600G07 | LPT SHAFT GUIDE AND STOP TOOL | 11 | |
| 856A2616 | SECTOR CENTER LPT SHAFT FWD | 1 | |
| 856A2616 G01 | Sector ‐ Center LPT Shaft Fwd | 5 | |
| 856A2616G01 | Sectors, Centering - Forward LPT Shaft (centering sectors) | 5 | |
| 856A2618G03 | TUBE DUMMY LPT SHAFT FWD END | 3 | |
| 856A2618G04 | TUBE DUMMY LPT SHAFT FWD END | 11 | |
| 856A2624G01 | BEAM, RESIDUAL TORQUE - LPT SHAFT COUPLING NUT (RESIDUAL TORQUE BEAM) | 3 | |
| 856A2632G01 | LPT SHAFT REMOVAL PULLER - CFM56 | 23 | |
| 856A2634 G01 | Dolly store LPT shaft | 9 | |
| 856A2634G01 | Dolly, Assembly/Disassembly and Storage - LPT Shaft (dolly) | 9 | |
| 856A2660G10 | EYE, LIFTING - LPT SHAFT MODULE, AFT | 4 | |
| 856A2674 | PROTECTION COVER - LPT SHAFT | 1 | |
| 856A2674G01 | Protection Cover - LPT Shaft (protection cover) | 4 | |
| 856A2709G01 | FIXTURE, ALIGNMENT/GUIDE BOOSTER/LPT SHAFT | 7 | |
| 856A2711 | FIXTURE, CENTERING LPT SHAFT MODULE;G01 | 1 | |
| 856A2711G01 | Fixture Centre LPT Shaft | 11 | |
| 856A2711G03 | CENTERING FIXTURE - LPT SHAFT | 1 | |
| 856A2713 | Fixture Build-up LPT Shaft module to LPT module | 1 | |
| 856A2713G01 | FIXTURE BUILD, UP LPT SHAFT MODULE TO LPT MODULE | 1 | |
| 856A2713G02 | FIXTURE BUILD, UP LPT SHAFT MODULE TO LPT MODULE | 1 | |
| 856A2713G03 | FIXTURE BUILD, UP LPT SHAFT MODULE TO LPT MODULE | 1 | |
| 856A2713G04 | Fixture B/U LPT Shaft To LPT | 2 | |
| 856A2713G05 | FIXTURE BUILD, UP LPT SHAFT MODULE TO LPT MODULE | 1 | |
| 856A2713G06 | FIXTURE BUILD, UP LPT SHAFT MODULE TO LPT MODULE | 1 | |
| 856A2713G07 | Fixture, Buildup - LPT Shaft to LPT Module (buildup fixture) 1 ea | 8 | |
| 856A2716G01 | LPT SHAFT CENTRING FIXTURE | 3 | |
| 856A2731 | SECTORS SUPT LPT SHAFT TO LPT | 1 | |
| 856A2731G01 | SECTORS, SUPPORT - LPT SHAFT TO LPT MODULE (SUPPORT SECTORS) | 2 | |
| 856A2731G02 | SECTORS SUPT LPT SHAFT TO LPT | 7 | |
| 856A2756 | HEATER LPT SHAFT TO STUB SHAFT (LESS HEATER) | 1 | |
| 856A2756G01 | Heater LPT Shaft To Stub Shaft | 1 | |
| 856A2756G02 | Heater LPT Shaft To Stub Shaft | 1 | |
| 856A2756G03 | Heater LPT Shaft to Stub Shaft | 1 | |
| 856A2756G04 | HEATER - LPT/STUB SHAFT | 2 | |
| 856A2756G05 | HEATER - LPT/STUB SHAFT | 4 | |
| 856A2756G06 | HEATER - LPT/STUB SHAFT | 1 | |
| 856A2757G01 | FIXTURE, CENTERING LPT SHAFT MODULE | 3 | |
| 856A2758 | FIXTURE, CENTERING - LPT SHAFT TO LPT (CENTERING FIXTURE) | 1 | |
| 856A2758G01 | Fixture Centre LPT Shaft | 1 | |
| 856A2758G02 | FIXTURE, CENTERING - LPT SHAFT TO LPT (CENTERING FIXTURE) | 6 | |
| 856A2758G02 | FIXTURE CENTERING LPT SHAFT TO LPT | 6 | |
| 856A2773G01 | GUIDE, ALIGNMENT - LPT REAR FRAME TO LPT SHAFT (ALIGNMENT GUIDE) | 10 | |
| 856A2789G01 | CENTERING RING - LPT SHAFT AFT ROTATING AIR SEAL | 1 | |
| 856A2789G02 | CENTERING RING - LPT SHAFT AFT | 4 | |
| 856A2950 | FIXTURE, CENTER - LPT SHAFT (CENTERING FIXTURE) | 1 | |
| 856A2950G0 | FIXTURE, CENTERING - LPT SHAFT MODULE | 1 | |
| 856A2950G01 | Fixt Centre LPT Shaft | 10 | |
| 856A2963G01 | PROTECTION COVER-LPT SHAFT | 1 | |
| 856A2984 | ALIGNMENT FIXTURE-BOOSTER/LPT SHAFT | 1 | |
| 856A2984G01 | ALIGNMENT FIXTURE - BOOSTER/LPT SHAFT | 1 | |
| 856A2984G02 | Fixture, Alignment - Booster to LPT Shaft (alignment fixture) | 4 | |
| 856A2985 | DRIVE ADAPTER-BOOSTER/LPT SHAFT | 1 | |
| 856A2985G01 | DRIVE ADAPTER-BOOSTER/LPT SHAFT | 4 | |
| 856A2986 | ALIGNMENT FIXTURE - BOOSTER/LPT SHAFT | 1 | |
| 856A2986G02 | FIXTURE, ALIGNMENT - BOOSTER/LPT SHAFT | 4 | |
| 856A3097 | PULLER LPT STUB SHAFT | 1 | |
| 856A3097 G03 | Puller ‐ LPT Stub Shaft | 5 | |
| 856A3097G03 | PULLER LPT STUB SHAFT | 5 | |
| 856A3104 | TUBE DUMMY LPT SHAFT PLUG | 1 | |
| 856A3104G03 | TUBE DUMMY LPT SHAFT PLUG | 1 | |
| 856A3118 | ADAPTER AXIAL LOAD FAN SHAFT | 1 | |
| 856A3119 | ADPT AXIAL LOAD LPT SHAFT | 1 | |
| 856A3143G02 | ADPT PULL WASHER INPUT GEARSHAFT | 1 | |
| 856A3236G01 | GUIDE ALIGNMENT LPT/LPT SHAFT | 1 | |
| 856A3246 | GUIDE LPT TO LPT SHAFT | 1 | |
| 856A3246 G01 | Guide Alignment ‐ LPT/LPT Shaft | 6 | |
| 856A3246G01 | GUIDE LPT TO LPT SHAFT | 6 | |
| 856A3247 | GUIDE, ALIGNMENT - LPT REAR FRAME TO LPT SHAFT (ALIGNMENT GUIDE) | 1 | |
| 856A3247 G02 | Guide Alignment ‐ Turbine Frame/LPT Shaft | 1 | |
| 856A3247G02 | GUIDE, ALIGNMENT - TURBINE FRAME/LPT SHAFT (GUIDE) | 1 | |
| 856A3247G03 | Guide, Alignment - LPT Rear Frame to LPT Shaft (alignment guide) | 10 | |
| 856A3259G04 | SUPPORT - VERT. - LPT SHAFT & DUMMY | 2 | |
| 856A3260 | PLUG EXTRACT LPT SHAFT COMPONENTS | 1 | |
| 856A3260 G01 | Plug Extraction ‐ Main Components LPT Shaft | 1 | |
| 856A3260G02 | Extraction Plug - Main Components, LPT Shaft | 10 | |
| 856A3338 | LPT SHAFT MODULE | 1 | |
| 856A3338G02 | CONTAINER, SHIPPING - LPT SHAFT | 1 | |
| 856A3383 | FIXTURE ALIGN. TURBINE FRAME OR LPT/LPT SHAFT | 1 | |
| 856A3383 REV E | FIXTURE ALIGN. TURBINE FRAME OR LPT/LPT SHAFT | 1 | |
| 856A3383G01 | FIXTURE ALIGN. TURBINE FRAME OR LPT/LPT SHAFT | 13 | |
| 856A3386 | HEATER LPT SHAFT HUB | 1 | |
| 856A3386G03 | Diffusers LPT Stub Shaft | 1 | |
| 856A3386G05 | HEAT DIFFUSER - LPT SHAFT | 1 | |
| 856A3386G06 | HEAT DIFFUSER - LPT SHAFT | 1 | |
| 856A3386G07 | HEAT DIFFUSER - LPT SHAFT | 1 | |
| 856A3410G01 | TORQUING DISTRIBUTION RING - LPT SHAFT | 6 | |
| 856A3421 | Supt. Balancing Shaft | 1 | |
| 856A3421G01 | SUPT FAN ASSY BAL SHAFT | 1 | |
| 856A3431 | HEATER LPT SHAFT | 1 | |
| 856A3431G02 | DIFFUSER, HEAT - LPT SHAFT | 1 | |
| 856A3431G04 | Diffusers LPT Shaft | 1 | |
| 856A3431G06 | DIFFUSER, HEAT - LPT SHAFT | 1 | |
| 856A3431G08 | HEATER, LPT SHAFT (220V/50HZ) | 1 | |
| 856A3432 | GAGE LPT STUB SHAFT TO LPT SHAFT | 1 | |
| 856A3432G01 | GAGE LPT STUB SHAFT TO LPT SHAFT | 10 | |
| 856A3440G01 | TOOL SET, INST/REM. LPT SHAFT BALANCE | 1 | |
| 856A3440G02 | TOOL SET, INST/REM. LPT SHAFT BALANCE | 1 | |
| 856A3440G03 | TOOL SEL, INST/REM. BALANCING BRG_LPT SHAFT | 1 | |
| 856A3449G01 | SHAFT, BALANCE - LPTROTOR/STATOR | 1 | |
| 856A3454 | TOOL SET, BALANCE RING AND CLAW EXTRACTOR - LPT SHAFT BALANCING | 1 | |
| 856A3454G03 | TOOL SET PULL LPT SHAFT BAL | 2 | |
| 856A3455G01 | BALANCING DRIVE ADAPTER - FWD LPT SHAFT | 2 | |
| 856A3463 | LEVER ANTI TORQUE LPT SHAFT | 1 | |
| 856A3463 G01 | Lever Countertorque ‐ LPT Shaft | 8 | |
| 856A3463G01 | Lever, Countertorque - LPT Shaft (countertorque lever) | 8 | |
| 856A3468G01 | ADAPTER DRIVE FORWARD LPT SHAFT BALANCING | 1 | |
| 856A3469 | PULLER, FWD BALANCING BEARING LPT SHAFT | 1 | |
| 856A3469 REV A | PULLER, FWD BALANCING BEARING LPT SHAFT | 1 | |
| 856A3469G01 | PULLER. FWD BALANCING BEARING LPT SHAFT | 1 | |
| 856A3485 | CAP, PROTECTIVE - THREAD LPT SHAFT | 1 | |
| 856A3485G01 | CAP, PROTECTIVE - THREAD, LPT SHAFT (PROTECTIVE CAP) | 2 | |
| 856A3485P01 | CAP PROTECTIVE THREAD LPT SHAFT | 6 | |
| 856A3488 | HOLDING SECTORS SET - LPT SHAFT | 1 | |
| 856A3488G01 | LPT shaft support | 4 | |
| 856A3501 | FIXTURE, ALIGNMENT / GUIDE - BOOSTER / LPT SHAFT. | 2 | |
| 856A3501 G02 | Fixture Alignment/Guide Booster/LPT Shaft | 5 | |
| 856A3501 G03 | FIXTURE, ALIGNMENT/GUIDE BOOSTER/LPT SHAFT (ALIGNMENT/GUIDE FIXTURE) | 14 | |
| 856A3501G01 | FIXTURE, ALIGNMENT / GUIDE - BOOSTER / LPT SHAFT | 1 | |
| 856A3501G02 | FIXTURE, ALIGNMENT / GUIDE - BOOSTER / LPT SHAFT | 5 | |
| 856A3501G03 | FIXTURE, ALIGNMENT / GUIDE - BOOSTER / LPT SHAFT | 14 | |
| 856A3501G03 | FIXTURE, ALIGNMENT-GUIDE-BOOSTER/LPT SHAFT FIXTURE | 14 | |
| 856A3501G04 | Fixture Align/Guide Booster To LPT Shaft | 14 | |
| 856A3501G04 | FIXTURE, ALIGNMENT-GUIDE-BOOSTER/LPT SHAFT | 14 | |
| 856A3565 | BASEPLATE SUPT AGB GEARSHAFT | 1 | |
| 856A3565G03 | BASEPLATE SUPT AGB GEARSHAFT | 1 | |
| 856A3569 | SUPT FUEL PUMP DR GEARSHAFT | 1 | |
| 856A3569G01 | Supt Fuel Pump Dr Gearshaft | 6 | |
| 856A3706 | SECTOR CENTERING LPT SHAFT FWD | 1 | |
| 856A3706G01 | Sector Centering LPT Shaft Fwd End | 6 | |
| 856A3750 | FIXTURE, CENTERING LPT SHAFT MODULE | 1 | |
| 856A3750G01 | Fixture Center LPT Shaft | 2 | |
| 856A3750G02 | FIXTURE, CENTERING LPT SHAFT MODULE | 13 | |
| 856A3750G02 | LPT SHAFT LOCATOR | 13 | |
| 856A3750G03 | LPT SHAFT LOCATOR | 1 | |
| 856A3750G04 | FIXTURE, CENTERING LPT SHAFT MODULE | 1 | |
| 856A3775G01 | Cover, Protection LPT Shaft | 1 | |
| 856A3792 | CENTERING FIXTURE - LPT SHAFT/LPT | 1 | |
| 856A3792G01 | Fixt Centre LPT Shaft to LPT | 6 | |
| 856A3859 | SUPT. VERT GEARSHAFT | 1 | |
| 856A3859G01 | SUPT VERT GEARSHAFTS AGB | 1 | |
| 856A4234G03 | FIXTURE SET, MACHINING HPT ROTOR SHAFT - FRONT | 1 | |
| 856A4265 | FIXTURE, MACHINING - HPTR REARSHAFT | 1 | |
| 856A4265G01 | FIXT MACH HPT AFT SHAFT | 1 | |
| 856A5944 | TOOL GAGE - POSITION LPT SHAFT | 1 | |
| 856A5944G01 | Fixture, Alignment - LPT Shaft | 2 | |
| 856A5944G02 | FIXTURE, ALIGNMENT - LPT SHAFT | 1 | |
| 856A5944G03 | FIXTURE, ALIGNMENT - LPT SHAFT | 2 | |
| 856A5944G04 | FIXTURE, ALIGNMENT - LPT SHAFT | 4 | |
| 856A5944G05 | FIXTURE, ALIGNMENT - LPT SHAFT | 1 | |
| 856A5944G06 | FIXTURE, ALIGNMENT - LPT SHAFT | 6 | |
| 856A5945 | MASTER, ALIGNMENT - LPT SHAFT (MASTER) | 1 | |
| 856A5945G01 | MASTER, ALIGNMENT - LPT SHAFT | 5 | |
| 856A5945G02 | MASTER, ALIGNMENT - LPT SHAFT | 3 | |
| 856A5945G03 | MASTER, ALIGNMENT - LPT SHAFT | 3 | |
| 856A5945G04 | MASTER, ALIGNMENT - LPT SHAFT | 4 | |
| 856A6001G01 | PROTECTOR, FIXTURE ALIGNMENT - LPT SHAFT | 1 | |
| 856А3485 | CAP PROTECTIVE THREAD LPT SHAFT | 1 | |
| 856А3485P01 | CAP PROTECTIVE THREAD LPT SHAFT | 1 | |
| 856А3750 | FIXTURE, CENTERING LPT SHAFT MODULE | 1 | |
| 856А3750G02 | FIXTURE, CENTERING LPT SHAFT MODULE | 1 | |
| 85ED03117 | LPT SHAFT STAND_[85ED03117] | 1 | |
| 8C2012 | FIXTURE, CHILL - FWD SHAFT, HPTR | 1 | |
| 8C2452 | FIXTURE, CENTERING-LPT SHAFT | 1 | |
| 8C2539 | ADAPTER, TORQUE FAN SHAFT EXTENSION NUT AND SENSOR, SHAFT NUT | 1 | |
| 905-14511 | INTERUPTER OIL COOLER SHAFT COUPLING AS332 | 1 | |
| 913789-1 | SHAFT ADAPTER | 1 | |
| 9400M95 | FIXTURE, LIFT-LPT MID FAN SHAFT | 1 | |
| 9426M18G02 | PEDESTAL LPT SHAFT SUPPORT | 1 | |
| 9458M56 | ADAPTER, SHAFT | 1 | |
| 956A1046 | FIXTURE - CHILL - FWD SHAFT - HPT | 1 | |
| 956A1259 | ADAPTER - GUIDE - HPC FWD SHAFT | 1 | |
| 956A3259 | ADAPTER - GUIDE - HIGH PRESSURE COMPRESSOR FORWARD SHAFT | 1 | |
| 956A6309 | SET - DUMMY NUTS - LPT SHAFT | 1 | |
| 956A6335 | PROTECTOR - FORWARD LPT SHAFT | 1 | |
| 956A6342 | FIXTURE - RESTRAINER - D BOLT - LPT SHAFT | 1 | |
| 956A6355 | FIXTURE - INSTALLATION GUIDE - LPT SHAFT | 1 | |
| 956A6366 | PROTECTOR - LPT SHAFT | 1 | |
| 956A6480 | FIXTURE - RESTRAIN - LPT SHAFT BOLTS D | 1 | |
| 956A6674 | SLIDE HAMMER & ADAPTER - TGB TRANSFERT SHAFT | 2 | |
| 956A6674G02 | SLIDE HAMMER AND ADAPTER TGB TRANSFER SHAFT | 4 | |
| 956A7622 | FIXTURE - GUIDE SHAFT - LPT SHAFT | 1 | |
| 956A7631 | PROTECTOR - ENGINE ASSY - LPT SHAFT | 1 | |
| 956A8314 | PROTECTOR - REAR LPT SHAFT | 1 | |
| 956A8321 | FIXTURE - REMOVE - LPT SHAFT | 1 | |
| 956A8489 | FIXTURE - LIFT - FWD - LPT SHAFT | 1 | |
| 956A8490 | FIXTURE - REAR LIFT - LPT SHAFT | 1 | |
| 956A8491 | STAND - ASSEMBLY - LPT SHAFT | 1 | |
| 956A8640 | FIXTURE - GUIDE SHAFT - LPT SHAFT | 1 | |
| 956A8671 | FIXTURE - GUIDE SHAFT - LPT SHAFT | 1 | |
| 98A27508061000 | ADAPTER-FLAP DRIVE SHAFT,WING | 1 | |
| 98A27508062000 | ADAPTER - FLAP DRIVE SHAFT LH-RH WING | 3 | |
| 98A27808003000 | Adapter fuer torque shaft drive tool-24 teeth | 3 | |
| 98A27808003001 | Adapter fuer torque shaft drive tool-24 teeth | 15 | |
| 98A27808003200 | ADAPTOR TORQUE SHAFT | 1 | |
| 98A27808003400 | ADAPTOR TORQUE SHAFT | 1 | |
| 9C1063 | CAP, LIFT LPT ROTOR, AFT SHAFT | 1 | |
| 9C1126 | DOLLY, LPT/MID SHAFT | 1 | |
| 9C1154 | FIXTURE, GUIDE-LPT SHAFT/TCF | 1 | |
| 9C1912 | BEARING INSTALL/PTO GEARSHAFT | 1 | |
| 9C1913 | BEARING REMOVAL/PTO GEARSHAFT | 1 | |
| 9C2000 | ADAPTER,TOOL SHAFT | 1 | |
| 9C2115G02 | ADVANCE WRENCH ADAPTER - FAN SHAFT EXTENSION NUT | 1 | |
| 9C3050 | NUT, SLAVE-FAN MID SHAFT/LPT CONE SHAFT | 1 | |
| A-C148659-1/13 | ADAPTER-FLAP ACTUATOR INPUT SHAFT | 1 | |
| A-C148659-113 | ADAPTER-FLAP ACTUATOR INPUT SHAFT | 1 | |
| AFLX-6.5 | ADAPTOR, MICRODOT FEMALE TO MAKE W/COPPER SHAFT, 6.5" TOTAL LENGTH 3" WORKING LENGTH | 1 | |
| AFLXR-6.5 | ADAPTOR, MICRODOT FEMALE TO RIGHT ANGLE MALE W/6.5" COPPER SHAFT | 1 | |
| AGE---00586-001 | ADAPTER - FLAP FLEX-IBLE SHAFT | 5 | |
| AGE-00545-001 | ADAPTER - FLAP FLEX-IBLE SHAFT | 1 | |
| AGE-00568-001 | ADAPTER - FLAP FLEXIBLE SHAFT | 1 | |
| AGE-00586-001 | ADAPTER - FLAP FLEX-IBLE SHAFT | 5 | |
| AGSE-C037 | LPT STATOR, ROTOR AND SHAFT CONTAINER (MAJOR MOD 3) | 1 | |
| A−C148659−1/13 | ADAPTER-FLAP ACTUATOR INPUT SHAFT | 1 | |
| B27029 | LUG SPANNER -0 TORQUE ADAPTER, RUDDER JACKSHAFT | 1 | |
| B27029-1 | LUG SPANNER - TORQUE ADAPTER, RUDDER JACKSHAFT | 1 | |
| B28009-1 | ADAPTOR SHAFT ALIGMENT TOOL | 19 | |
| B76004-1 | ADAPTER - THRUST CONTROL INNER SHAFT 76-10-03 | 1 | |
| B78016-9 | ADAPTER - WORM GEAR SHAFT (B78016-9 IS INCLUDED IN B78016-1) | 4 | |
| C-12003-1 | RAM AIR INLET MODULATION SHAFT LUBRICATION ADAPTOR | 5 | |
| C12003-1 | Adapter Nozzle - Ram Air Inlet Modulation Shaft | 5 | |
| C32031-7 | SHAFT ASSEMBLY-R/I EQPT AFT TRUNNION PIN MLG | 4 | |
| CH1057-280 | ADAPTOR - TORQUE SHAFT | 1 | |
| DMFLX-13 | Adaptor, Dual Microdot Female to Male w/ 13" copper shaft | 1 | |
| DT720120 | Stand LPT Shaft | 1 | |
| E0006 | Adapter Gearbox Drive Shaft | 1 | |
| E0013 | Grease Gun Adapter Gearbox Drive Shaft | 1 | |
| F70067 | ADAPTER -0 SPLINED SHAFT,INBD.FLAP DRIVE USED TO | 1 | |
| F72899 | WRENCH ADAPTER -0 MLG MAN EXT SHAFT BRG RETAINER | 1 | |
| F72899-1 | Wrench adapter-MLG man ext shaft BRG retainer unt | 1 | |
| FJC 04-35-40000-123 | L/H MAINT SHAFT ADAPTER | 1 | |
| FJC 04-35-40000-129 | R/H MAIN SHAFT ADAPTER | 1 | |
| FJC 04-35-40000-131 | NOSE WHEEL SHAFT ADAPTER | 1 | |
| GS11865 | PULLER - SHAFT ADAPTER | 1 | |
| GSE-064 | ADAPTER-FLAP FLEXIBLE SHAFT | 1 | |
| HA-23005426 | GUIDE Ã?? SPUR ADAPTER, GEAR SHAFT | 1 | |
| HC130H0103-000 | Adaptor - drive flap shaft | 4 | |
| HT4454 | FIXTURE - GUIDE SHAFT - LPT SHAFT - (MOD) | 1 | |
| HU28767-1 | FIXTURE, ALIGNMENT / GUIDE - BOOSTER / LPT SHAFT | 1 | |
| HU29227 | REAR SLINGING ADAPTOR LP COMP SHAFT ASSY | 1 | |
| IAE1J12201 | LIFTER FRONT LPT SHAFT | 1 | |
| IAE1J12202 | LIFTER REAR LPT SHAFT | 1 | |
| IAE1J12212 | Stand-Storage LPT Shaft | 1 | |
| IAE1J12223 | HAMMER CAP LPT SHAFT | 1 | |
| IAE1J12422 | Base Holder for Pto shaftLHT Dwg No.(537220096) | 1 | |
| IAE1M14007 | PULLER/PUSHER LPT SHAFTLHT Dwg No.(537250312) | 1 | |
| IAE1M14146 | PLATE SUPPORT LPT SHAFT | 3 | |
| IAE1R18673_A | Stub shaft Dummy Adapter | 1 | |
| IAE1R18907 | RETAINER EXPANDING LPT SHAFT | 2 | |
| IAG-249-01 | SPACER - HPT BALANCING SHAFT | 1 | |
| IAG-253-02 | WRENCH FOR CF6-50 HPT BUILDUP TOOL SHAFT | 1 | |
| J27043-18 | Clamp Eqpt - Drive Shaft TE Flap | 11 | |
| J27043-30 | Clamp eqpt-drive shaft，t.e.flap | 2 | |
| J2704318 | CLAMP EQPT-DRIVE SHAFT, T.E FLAP | 11 | |
| J27046-1 | Clamp eqpt-L.E. slat drive shaft | 14 | |
| J27046-34 | Clamp eqpt-l.e.slat drive shaft | 3 | |
| J27067-9 | SHAFT LOCK EQPT | 1 | |
| J47201 | Adapter for shaft D46242 | 8 | |
| JW0900130 | HPT BALANCING DRIVE SHAFT | 1 | |
| K24001-117 | Shaft Adapter | 1 | |
| K27040 | CLAMP EQPT-DRIVE SHAFTS,LE SLATS & TE FLAPS | 1 | |
| K27040-1 | Clamp Eqpt - Drive Shafts, LE Slats & TE Flaps | 9 | |
| KD1H52404-2 | FLEXIBLE SHAFT SCANNER PROBE, 6.1MM DIAMETER, 90MM WL, A320 PT6 53-31-50 PG623, 100KHZ-2MHZ | 1 | |
| KD1H52408-2 | FLEXIBLE SHAFT SCANNER PROBE, 7.8MM DIAMETER, 90MM WL, A320 PT6 53-31-50 PG623, 100KHZ-2MHZ | 1 | |
| LTCT23503 | Adapter, Shaft | 1 | |
| ME9026-0300 | ACTUATOR DRIVE SHAFT ADAPTER | 1 | |
| MFLX-10 | Adaptor, Microdot Female to Male w/ 10" copper shaft | 1 | |
| MFLX-20 | Adaptor, Microdot Female to Male w/ 20" copper shaft | 1 | |
| MFLX-4 | Adaptor, Microdot Female to Male w/ 4" copper shaft | 1 | |
| MFLX-5 | Adaptor, Microdot Female to Male w/ 5" copper shaft | 1 | |
| MFLX-6 | Adaptor, Microdot Female to Male w/ 6" copper shaft | 2 | |
| MFLX-8 | Adaptor, Microdot Female to Male w/ copper shaft, 8" OAL | 1 | |
| MFLX90-6 | ADAPTOR, MICRODOT FEMALE TO RIGHT ANGLE MALE W/ 6" COPPER SHAFT | 1 | |
| MFLXR-10 | Adaptor, Microdot Female to Right Angle Male w/ 10" copper shaft | 1 | |
| MFLXR-6 | Adaptor, Microdot Female to Right Angle Male w/ 6" copper shaft | 2 | |
| MFLXR-8 | Adaptor, Microdot Female to Right Angle Male w/ 8" copper shaft | 1 | |
| MHC-12 | DRIVE SHAFT ADAPTER | 1 | |
| MIT65B92408-1 | ADAPTER SHAFT - ALIGNMENT FIXTURE | 9 | |
| P60039 | LPT CONTAINER NO SHAFT | 1 | |
| P60043 | LPT CONTAINER WITH SHAFT | 1 | |
| PIN,HPT,AIR SEAL | PIN FOR HPT ROTOR FWD SHAFT AIR SEAL CLIP DIMPLE | 1 | |
| PV140R1K4C1 | MMK PUMP (EPDM SEAL/PTFE SHAFT SEAL) | 1 | |
| PWA 25094 | GUIDE-ENG.ASY LPT SHAFT | 2 | |
| PWA 25504 | SQUEEZER-LPT SPECER SHAFT | 2 | |
| PWA 85319 | HEATER, ELECTRICAL - ENGINE ASSY LPT SHAFT INSTALLATION | 1 | |
| PWA101199 | POST SUPPORT LPT WITH SHAFT TEC IN STAND | 1 | |
| PWA101222 | POST SUPPORT LPT WITH SHAFT TEC IN STAND | 1 | |
| PWA108201 | PUSHER HYD LPT SHAFT | 1 | |
| PWA108351 | ADAPTOR REMOVAL LPT SHAFT | 1 | |
| PWA12443 | ADAPTER-HPT SHAFT | 5 | |
| PWA25026 | ADAPTER-WRENCH TURBINE SHAFT NUT | 2 | |
| PWA25093 | GUIDE - ENG ASSY LPT SHAFT_[PWA25093] | 2 | |
| PWA25094 | GUIDE - ENG ASSY LPT SHAFT_[PWA25094] | 2 | |
| PWA25488 | SPACER NUT SET - LPT SHAFT HANDLG,TIEROD_[PWA25488] | 2 | |
| PWA25504 | SQUEEZER,HYD - LPT SPACER TO SHAFT_[PWA25504] | 2 | |
| PWA25528 | PULLER - LPT BAL BRG FR SHAFT, FRONT_[PWA25528] | 2 | |
| PWA25719 | SUPPORT - LPT, BAL FIX TO SHAFT_[PWA25719] | 2 | |
| PWA25830 | EYE, LIFTING - LPT, FRT SHAFT HANDLING_[PWA25830] | 2 | |
| PWA26871 | ADAPTER - TURBINE SHAFT FRONT FLANGE | 2 | |
| PWA26872 | ADAPTER-TURBINE SHAFT FRONT FLANGE | 3 | |
| PWA26873 | ADAPTER - FLANGE, LPC DRIVE TURB SHAFT_[PWA26873] | 2 | |
| PWA27275 | CAP, PRESS TEST - LPT SHAFT AIR INJECT_[PWA27275] | 2 | |
| PWA27896 | EYE - LPT SHAFT & DISKS_[PWA27896] | 2 | |
| PWA29989 | ADAPTER-R I TURBINE SHAFT NUT | 1 | |
| PWA32062 | WRENCH-BRG NO.5 NUT-HPT SHAFT | 3 | |
| PWA45011 | EXTRACOR -LPT SHAFT COUPLING NUT RE | 1 | |
| PWA45017 | LPT SHAFT PUSHER | 1 | |
| PWA47036 | PUIIER-SPACER BRG NO 5HPT SHAFT | 4 | |
| PWA47037 | PULLER-BRG NO. 5-HPT SHAFT | 1 | |
| PWA75284 | PULLER,KNOCKER - LPT PLATE FORM SHAFT_430X127X127MM/3.2KG_[PWA75284] | 2 | |
| PWA75511 | ADAPTER-R I TURBINE SHAFT NUT | 1 | |
| PWA75574 | ADAPTER-LPT SHAFT REAR_[PWA75574] | 2 | |
| PWA77215 | RETAINER, LPT SHAFT | 1 | |
| PWA81573 | PULLER MECHANICAL LPT DRIVE SHAFT FRONT PLUG | 1 | |
| PWC 66625 | SHAFT ADAPTER | 4 | |
| PWC30368 | ADAPTER, STUBSHAFT | 1 | |
| PWC31327 | COLLAR ADAPTER, HP TURBINE SHAFT NUT | 1 | |
| PWC31400 | ADAPTER, JT15D-4 SERIES FAN SHAFT (PRE-SB7135/PRE-SB7318) | 1 | |
| PWC32085 | PULLER-PT, SHAFT SLEEVE | 1 | |
| PWC32086 | DRIFT-PT, SHAFT SLEEVE | 1 | |
| PWC37030 | ADAPTER, MEASURING, OIL PUMP SHAFT BEARING | 1 | |
| PWC37502 | ADAPTER, MEASURING, UPPER TOWER SHAFT SPACER | 1 | |
| PWC37613 | Adapter, Propeller Shaft | 1 | |
| PWC37760 | Adapter SHAFT | 5 | |
| PWC38395 | ADAPTER STUBSHAFT | 1 | |
| PWC40112 | PAD-SHAFT,HPT | 1 | |
| PWC40580 | Adapter-SPLINE,GEARSHAFT | 1 | |
| PWC40601 | ROD ADAPTER, STUBSHAFT | 1 | |
| PWC40653 | Adapter SHAFT | 1 | |
| PWC42043 | Pusher PT shaft | 3 | |
| PWC42197 | Adapter Oil pump shaft | 1 | |
| PWC43266 | Adapter LC Shaft | 2 | |
| PWC45314 | ADAPTER-PROPSHAFT | 1 | |
| PWC47096 | SOCKET HPT TIESHAFT | 1 | |
| PWC50028 | Adapter Gearshaft | 1 | |
| PWC51748 | PT shaft rod assy | 2 | |
| PWC52077 | ADAPTER, FAN SHAFT | 1 | |
| PWC54082 | Adapter Stub Shaft | 5 | |
| PWC54267 | ADAPTER, HPT DISK/STUBSHAFT BALANCING | 1 | |
| PWC54386 | ADAPTER, MEASURING, OIL PUMP GEARSHAFT BACKLASH | 1 | |
| PWC56260 | ADAPTER, HPT DISK/STUBSHAFT, BALANCING | 1 | |
| PWC56845 | Adapter SHAFT | 1 | |
| PWC56870 | Adapter, Propeller Shaft | 1 | |
| PWC56871 | ADAPTER LIFTER SHAFT | 5 | |
| PWC57254 | Adapter-PT SHAFT | 1 | |
| PWC57573 | ADAPTER, SHAFT | 1 | |
| PWC57593 | Pad PT Shaft | 1 | |
| PWC60356 | Adapter Stud Shaft | 1 | |
| PWC61059 | Adapter,Gearshaft | 3 | |
| PWC61248 | ADAPTER-TIE SHAFT | 1 | |
| PWC61875 | SOCKET-HPT TIE SHAFT | 1 | |
| PWC61876 | TIE SHAFT ADAPTER | 1 | |
| PWC62679 | ADAPTER SHAFT LP | 3 | |
| PWC63293 | STRETCHER HPT SHAFT | 1 | |
| PWC63471 | HPT SHAFT GAUGE | 1 | |
| PWC64821 | Adapter CPLG Shaft | 1 | |
| PWC64822 | Adapter CPLG Shaft | 1 | |
| PWC64823 | Adapter CPLG Shaft | 1 | |
| PWC66354 | Adapter SHAFT | 1 | |
| PWC66471 | ADAPTOR-SHAFT | 1 | |
| PWC66625 | ADAPTER SHAFT | 4 | |
| PWC66644 | ADAPTER SHAFT | 1 | |
| PWC67012 | ADAPTER SHAFT | 1 | |
| PWC67816 | ADAPTER SHAFT | 1 | |
| PWC67954 | Shaft adapter | 1 | |
| PWC70336 | ADAPTER-GEARSHAFT | 1 | |
| PWC71410 | ROD ASSY. PT SHAFT | 6 | |
| PWC72886 | PLUG PT SHAFT MPI | 1 | |
| PWC77135 | BASE PT SHAFT | 1 | |
| R2102 | ADAPTER: SHAFT,ST, RAT GTM | 1 | |
| RA-RAFX-6 | FLEX SHAFT ADAPTER FOR RECHII SCANNER MALE CONNECTOR TO RECHII RA PROBE, (4PIN STEP LEMO RECEPTACLE FEMALE CONNECTOR) WITH SLIDING COLLAR, 6.0" LONG. Includes Test Report and Certificate of Conformance | 1 | |
| RB T103013 | Wrench & Adapter, Collector Shaft | 1 | |
| RB23005426 | Guide - Spur Adapter Gearshaft C-30 | 2 | |
| RB23006778 | Guide Bearing Spur Adapter Gearshaft C-20 | 2 | |
| RB6798981 | Prop Shaft Splined Adapter | 1 | |
| RB6893501 | Drift-Spur Adapter Gearshaft | 2 | |
| RBA9957 | Main Rotor Drive Shaft Torque Adapter (Frdh101) | 2 | |
| RBT101588 | MAIN DRIVESHAFT / INPUT ADAPTER WRENCH | 2 | |
| RRT029946 | SHAFT ADAPTOR | 1 | |
| RRT109650 | LPT FWD SHAFT SUPPORT | 1 | |
| RT19H-TT1 | ADAPTER SHAFT | 1 | |
| RT19H-TT2 | ADAPTER SHAFT | 1 | |
| SDM-11 | ADAPTER FLEXIBLE DRIVE SHAFT | 6 | |
| SDM11 | Adapter − Flexible Shaft Drive | 6 | |
| SDM11A | ADAPTER - FLEXIBLE SHAFT DRIVE | 1 | |
| SPT-U4040SS15.8-18/6WL | SPTech Dual Coil Hole Probe for Stavely Spitfire, Stainless Shaft to Universal, 15.8 to 18mm, 6" WL, 50 to 500KHz, Diff | 1 | |
| SPT-U4040SS18-22/6WL | SPTech Dual Coil Hole Probe for Stavely Spitfire, Stainless Steel Shaft to Universal, Adjustable from 18 to 22mm OD, 6" WL, 50 to 500KHz, Diff | 1 | |
| SPT-U4040SS21/6WL/1M | SPTech Dual Coil Hole Probe for Stavely Spitfire, Stainless Shaft to Universal, 21mm OD, 6" WL, 250 KHz to 1MHz, Diff | 1 | |
| SPT/9095/90FX | SPTech EC Probe, Flex Copper Shaft, 9" Probe Length, 0.95" Drop | 1 | |
| STD67669 | Torque Adapter-Main Drive Shaft | 1 | |
| STI3249 | ADAPTER TORQUE WRENCH INPUT SHAFT, ASSY | 1 | |
| T-25817 | ADAPTER, MOTOR DRIVE SHAFT TORQUE | 1 | |
| T101588 | MAIN DRIVESHAFT / INPUT ADAPTER WRENCH | 1 | |
| T25817 | Adapter, Motor Drive Shaft Torque | 1 | |
| TEK-3005EM-6.1M | Flexible Shaft Scanner Probe, 6.1mm Diameter, A320 PT6 53-31-50 PG623, Elotest Mini, 100KHz-2MHz | 1 | |
| TEK-3005EM-6.1M/SS | Flexible Shaft Scanner Probe, 6.1mm Diameter, A320 PT6 53-31-50 PG623, Elotest Mini Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005EM-7.8M | Flexible Shaft Scanner Probe, 7.8mm Diameter, A320 PT6 53-31-50 PG623, Elotest Mini, 100KHz-2MHz | 1 | |
| TEK-3005EM-7.8M/SS | Flexible Shaft Scanner Probe, 7.8mm Diameter, A320 PT6 53-31-50 PG623, Elotest Min Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005EM-9.3M/SS | Flexible Shaft Scanner Probe, 9.3mm Diameter, A320 PT6 53-31-50 PG623, Elotest Min Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005R-4.7M | Flexible Shaft Scanner Probe, 4.7mm Diameter, Rechii Minimite (4-pin Lemo), A320 PT6 53-31-50 PG623, 100KHz-2MHz | 1 | |
| TEK-3005R-6.1M | Flexible Shaft Scanner Probe, 6.1mm Diameter, Rechii Minimite (4-pin Lemo), A320 PT6 53-31-50 PG623, 100KHz-2MHz | 1 | |
| TEK-3005R.240 | Flexible Shaft Scanner Probe, .240" Diameter, A320 PT6 53-31-50 PG623 Rechii connector (4-pin Lemo), 100KHz-2MHz | 1 | |
| TEK-3005R.307 | Flexible shaft scanner probe .307 dia 7.8 A320 PT6 53-31-50 PG623 Rechii connector (4-pin Lemo), 100KHz-2MHz | 1 | |
| TEK-3005U-4.0M/SS/90WL | Flexible Shaft Scanner Probe, 4.0mm Diameter, 90mm WL, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005U-4.7M | Flexible Shaft Scanner Probe, 4.7mm Diameter, A320 PT6 53-31-50 PG623, 100KHz-2MHz | 1 | |
| TEK-3005U-4.7M/SS/70WL | Flexible Shaft Scanner Probe, 4.7mm Diameter, 70mm WL, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005U-4.8M/SS/90WL | Flexible Shaft Scanner Probe, 4.8mm Diameter, 90mm WL, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005U-6.1M | Flexible Shaft Scanner Probe, 6.1mm Diameter, A320 PT6 53-31-50 PG623, 100KHz-2MHz | 1 | |
| TEK-3005U-6.1M/SS/90WL | Flexible Shaft Scanner Probe, 6.1mm Diameter, 90mm WL, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005U-6.25M | Flexible Shaft Scanner Probe, 6.25mm Diameter, A300-600 PT6 53-15-79 PG606 FG603, 100KHz-2MHz | 1 | |
| TEK-3005U-7.8M | FLEXIBLE SHAFT SCANNER PROBE, 7.8MM DIAMETER, 90MM WL, A320 PT6 53-31-50 PG623, 100KHZ-2MHZ | 1 | |
| TEK-3005U-7.8M/SS/90WL | Flexible Shaft Scanner Probe, 7.8mm Diameter, 90mm WL, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005U-7.9M/SS/90WL | Flexible Shaft Scanner Probe, 7.9mm Diameter, 90mm WL, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005U-8.2M | Flexible Shaft Scanner Probe, 8.2mm Diameter, A320 PT6 53-31-50 PG623, 100KHz-2MHz | 1 | |
| TEK-3005U-8.7M | Flexible Shaft Scanner Probe, 8.7mm Diameter, A320 PT6 53-31-50 PG623, 100KHz-2MHz | 1 | |
| TEK-3005U-9.4M | Flexible Shaft Scanner Probe, 9.4mm Diameter, A300-600 PT6 53-15-79 PG606 FG603, 100KHz-2MHz | 1 | |
| TEK-3005U.140/SS/4WL | Flexible Shaft Scanner Probe, .140 Diameter, 4" WL, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005U.156/SS/4WL | Flexible Shaft Scanner Probe, .156 Diameter, 4" WL, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005U.171/SS/4WL | Flexible Shaft Scanner Probe, .171 Diameter, 4" WL, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005U.203/SS/4WL | Flexible Shaft Scanner Probe, .203 Diameter, 4" WL, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005U.240 | Flexible Shaft Scanner Probe, .240" Diameter, A320 PT6 53-31-50 PG623 Universal connector, 100KHz-2MHz | 1 | |
| TEK-3005U.307 | Flexible shaft scanner probe .307 dia 7.8 A320 PT6 53-31-50 PG623 Universal connector, 100KHz-2MHz | 1 | |
| TEK-3005UFB-10.3M/SS/90WL | Flexible Shaft Scanner Probe,10.3mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-10.7M/SS/90WL | Flexible Shaft Scanner Probe,10.7mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-11.1M/SS/90WL | Flexible Shaft Scanner Probe,11.1mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-11.5M/SS/90WL | Flexible Shaft Scanner Probe,11.5mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-11.9M/SS/90WL | Flexible Shaft Scanner Probe,11.9mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-4.0M/SS/90WL | Flexible Shaft Scanner Probe, 4.0mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-4.1M/SS/90WL | Flexible Shaft Scanner Probe, 4.1mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-4.5M/SS/90WL | Flexible Shaft Scanner Probe, 4.5mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-4.8M/SS/90WL | Flexible Shaft Scanner Probe, 4.8mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-5.1M/SS/90WL | Flexible Shaft Scanner Probe, 5.1mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-5.5M/SS/90WL | Flexible Shaft Scanner Probe, 5.5mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-5.9M/SS/90WL | Flexible Shaft Scanner Probe, 5.9mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-6.3M/SS/90WL | Flexible Shaft Scanner Probe, 6.3mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-6.7M/SS/90WL | Flexible Shaft Scanner Probe, 6.7mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-6.8M/SS/90WL | Flexible Shaft Scanner Probe, 6.8mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-7.1M/SS/90WL | Flexible Shaft Scanner Probe, 7.1mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-7.5M/SS/90WL | Flexible Shaft Scanner Probe, 7.5mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-7.6M/SS/90WL | Flexible Shaft Scanner Probe, 7.6mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-7.9M/SS/90WL | Flexible Shaft Scanner Probe, 7.9mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-8.3M/SS/90WL | Flexible Shaft Scanner Probe,8.3mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-8.7M/SS/90WL | Flexible Shaft Scanner Probe,8.7mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-9.1M/SS/90WL | Flexible Shaft Scanner Probe,9.1mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-9.5M/SS/90WL | Flexible Shaft Scanner Probe,9.5mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-9.9M/SS/90WL | Flexible Shaft Scanner Probe,9.9mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-10.3M/SS/104WL | Flexible Shaft Scanner Probe, 10.3mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-10.3M/SS/90WL | Flexible Shaft Scanner Probe, 10.3mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-10.7M/SS/90WL | Flexible Shaft Scanner Probe, 10.7mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-11.1M/SS/90WL | Flexible Shaft Scanner Probe, 11.1mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-11.5M/SS/90WL | Flexible Shaft Scanner Probe, 11.5mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-11.9M/SS/90WL | Flexible Shaft Scanner Probe, 11.9mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-5.1M/SS/90WL | Flexible Shaft Scanner Probe, 5.1mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-5.5M/SS/90WL | Flexible Shaft Scanner Probe, 5.5mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-5.9M/SS/90WL | Flexible Shaft Scanner Probe, 5.9mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-6.2M/SS/104WL | Flexible Shaft Scanner Probe, 6.2mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-6.3M/SS/90WL | Flexible Shaft Scanner Probe, 6.3mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-6.7M/SS/90WL | Flexible Shaft Scanner Probe, 6.7mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-7.0M/SS/104WL | Flexible Shaft Scanner Probe, 7.0mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-7.1M/SS/104WL | Flexible Shaft Scanner Probe, 7.1mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-7.1M/SS/90WL | Flexible Shaft Scanner Probe, 7.1mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-7.5M/SS/104WL | Flexible Shaft Scanner Probe, 7.5mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-7.5M/SS/90WL | Flexible Shaft Scanner Probe, 7.5mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-7.8M/SS/104WL | Flexible Shaft Scanner Probe, 7.8mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-7.9M/SS/104WL | Flexible Shaft Scanner Probe, 7.9mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-7.9M/SS/90WL | Flexible Shaft Scanner Probe, 7.9mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-8.3M/SS/104WL | Flexible Shaft Scanner Probe, 8.3mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-8.3M/SS/90WL | Flexible Shaft Scanner Probe, 8.3mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-8.6M/SS/104WL | Flexible Shaft Scanner Probe, 8.6mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-8.7M/SS/104WL | Flexible Shaft Scanner Probe, 8.7mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-8.7M/SS/90WL | Flexible Shaft Scanner Probe, 8.7mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-9.1M/SS/104WL | Flexible Shaft Scanner Probe, 9.1mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-9.1M/SS/90WL | Flexible Shaft Scanner Probe, 9.1mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-9.4M/SS/104WL | Flexible Shaft Scanner Probe, 9.4mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-9.5M/SS/104WL | Flexible Shaft Scanner Probe, 9.5mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-9.5M/SS/90WL | Flexible Shaft Scanner Probe, 9.5mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-9.9M/SS/104WL | Flexible Shaft Scanner Probe, 9.9mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-9.9M/SS/90WL | Flexible Shaft Scanner Probe, 9.9mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| lC6807 | BRACKET SET, ADAPTER-LPTR AFT SHAFT TO 2C600lG0l | 1 | |
| lC6837 | WRENCH SET, INSTALL & REMOVE LPTR FD SHAFT PLUG | 1 | |
| lC6846 | WRENCH, SPANNER-RETAINER NUT, LPT AFT SHAFT | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
