| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| PWC37056 | PT Pusher | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 109-3130-34-1 | TAIL ROTOR HUB BUSHING INSTALLATION ADAPTER [PUSHER IS PART OF THE TOOL (LSE NO 129)] | 1 | |
| 1C6800 | PUSHER, ROTATING PARTS - PT ROTOR, AFT | 1 | |
| 1C9608G01 | PUSHER/PULLER HPT (USED WITH 2C 14199G09) | 1 | |
| 1C9651G01 | PUSHER LPT | 1 | |
| 21C7255P01 | ADAPTER, PUSHER | 1 | |
| 23054761 | Pusher - 1st Stage Wheel Assembly From Aft Shaft, LPT Rotor | 1 | |
| 23054763 | Pusher - 1st Stage Vane, LPT Rotor | 1 | |
| 23054788 | Puller / Pusher Blade Track 1st Stage LPT Rotor | 1 | |
| 23054790 | Puller / Pusher, Blade Track 3rd Stage, LPT Rotor | 1 | |
| 23083918 | PUSHER, PTO SEAL | 1 | |
| 2C 14199G09 | PUSHER/PULLER HPTR | 1 | |
| 2C14025G04 | PUSHER SET, RACES/SEALS ‐ HPT ROTOR STAGE 1 | 1 | |
| 2C14025G05 | PUSHER SET, RACES/SEALS HPTR STAGE 1 | 3 | |
| 2C14028G01 | PUSHER HPT ROTOR D.S | 2 | |
| 2C14058G01 | PUSHER, DIFFUSER-HPTR STAGE 1 DISK | 1 | |
| 2C1408G01 | PUSHER/PULLER, HPT ROTOR (ROTOR PUSHER/PULLER) | 1 | |
| 2C14199G05 | FIXTURE, LIFT , PULLER/PUSHER - HPT HORIZONTAL | 1 | |
| 2C14199G09 | PUSHER/PULLER HPTR | 1 | |
| 2C14718G02 | PULLER/PUSHER, AIR TUBES ‐ STAGE 2 HPT | 2 | |
| 2C14869G01 | PUSHER, HPT ROTOR/DU | 1 | |
| 2C18008G01 | PUSHERPULLER,LPT SHAFT HORZ MAINT ONLY | 1 | |
| 2C5160G01 | PUSHER, LPT ROTOR | 1 | |
| 2C5191 | PUSHER - HPT ROTOR | 1 | |
| 2C5191G01 | PUSHER - HPT | 1 | |
| 2C5191G02 | PUSHER, HPT ROTOR | 1 | |
| 2C5191P23 | PUSHER, HPT ROTOR | 1 | |
| 2C5293G01 | PUSHER - PTO BEVEL | 1 | |
| 2C81128 | PUSHER/PULLER HPT ROTOR | 1 | |
| 2C81128G01 | PUSHER/PULLER - HPT ROTOR (ROTOR PUSHER/PULLER) | 1 | |
| 2C81408G01 | PUSHER/PULLER HPT ROTOR | 1 | |
| 2C81408G02 | PUSHER/PULLER − HPT ROTOR | 1 | |
| 2C81408G03 | PUSHER/PULLER - HPT ROTOR | 1 | |
| 2C81432G01 | PUSHER - BALANCE ARBOR, HPT ROTOR | 1 | |
| 2C81537G01 | PUSHER/PULLER, LPT MODULE | 3 | |
| 2C91176G01 | PUSHER-OUTERRACE PTO | 1 | |
| 2C91177P01 | PUSHER-GEARSHAFT PTO | 1 | |
| 2C91231 | PUSHER-LPT INTERSTAGE BOLTS | 1 | |
| 356A3279G02 | PUSHER/PUIIER - LPT DISKS SLEEVES (PUSHER/PULIER) | 1 | |
| 6795646 | PUSHER, SEPERATING PT/GP | 2 | |
| 6893505 | PUSHER, PTO SEAL | 4 | |
| 6893507 | PUSHER-PT GOVERNOR SEAL | 5 | |
| 856A2389G03 | TOOL SET, PUSHER/PULLER - STAGE 3 LPT DISK BUSHINGS (PUSHER/PULLER TOOL) | 1 | |
| 856A2408G01 | TOOL SET, PUSHER - STAGE 3 LPT DISK BUSHINGS (PUSHER TOOL) | 1 | |
| 856A2819 | BEAM PUSHER / PULLER ADAPTATION | 1 | |
| 856A2819G01 | BEAM PUSHER / PULLER ADAPTATION | 2 | |
| 856A2835 | ADAPTER PULLER/PUSHER | 1 | |
| 856A2835G01 | ADAPTER PULLER/PUSHER | 1 | |
| 856A2983G02 | FIXTURE, PUSHER/PULLER - LPT | 4 | |
| 856A2990 | BEAM PUSHER/PULLER ADAPTATION | 1 | |
| 856A2991 | ADAPTER PULLER/PUSHER | 1 | |
| 856A2991G01 | BEAM PUSHER / PULLER ADAPTATION | 5 | |
| 856A2996 | BEAM PUSHER/PULLER ADAPTATION | 1 | |
| 856A2996G01 | BEAM PUSHER / PULLER ADAPTATION | 3 | |
| 856A3279 | PUSHER/PULLER, LPT | 1 | |
| 856A3279 G02 | Pusher/Puller ‐ LPT Disks Sleeves | 2 | |
| 856A3279G02 | PUSHER/PULLER LPT DISK SLEEVES | 2 | |
| 856A3279G03 | PUSHER/PULLER - LPT DISK SLEEVES | 7 | |
| 856A3788G02 | BEAM PUSHER / PULLER ADAPTATION | 7 | |
| 856A3790 | PUSHER/PULLER FIXTURE - LPT REAR DUCT | 1 | |
| 856A3790G01 | PUSHER/PULLER FIXTURE - LPT REAR | 7 | |
| 8C3635 | ADAPTER - GUIDE - PUSHER HYDRAULIC - IGBX - HORIZONTAL | 1 | |
| 956A6249 | PUSHER/PULLER - OPT RESTRICTOR | 1 | |
| 956A6481 | SET, PUSHER/PULLER-LPT DISK BUSHINGS | 1 | |
| 956A6483 | FIXTURE - PUSHER - LPT RING -SEAL BEARING 5 | 1 | |
| 956A6486 | SET - PUSHER PULLER - LPT DISK BUSHINGS | 1 | |
| CHA141885 | PUSHER ADAPTOR | 1 | |
| DAH600596 | PUSHER ADAPTER | 1 | |
| GSB3210003 | OP CHK STICK PUSHER/SWSP CMPTR BITE TEST | 1 | |
| IAE1J12500-1A | ADAPTER, PUSHER | 1 | |
| IAE1M14007 | PULLER/PUSHER LPT SHAFTLHT Dwg No.(537250312) | 1 | |
| PWA 26312 | LPT PUSHER | 2 | |
| PWA 75668 | HPT Hydraulic Pusher | 2 | |
| PWA101833 | PUSHER JACKSCREW LPT | 1 | |
| PWA108201 | PUSHER HYD LPT SHAFT | 1 | |
| PWA211729 | ADAPTER PUSHER | 1 | |
| PWA211842 | ADAPTER PUSHER | 1 | |
| PWA25273 | PUSHER - HPT INSTALL/REMOVE_[PWA25273] | 2 | |
| PWA25273E | PUSHER/PULLER - HPT REM/INST_[PWA25273E] | 1 | |
| PWA26312 | PUSHER - LPT REAR BAL FIX REM_[PWA26312] | 2 | |
| PWA29946 | PUSHER-LPT MUB FROM #5 STG DIS_[PWA29946] | 2 | |
| PWA29948 | PUSHER-LPT 5STG FRO 4 STG DISK_[PWA29948] | 2 | |
| PWA29949 | PUSHER-LPT 4 STG FRO 3 STG DIS_[PWA29949] | 2 | |
| PWA45017 | PUSHER & PULLER FOR USED LPT | 1 | |
| PWA45210 | LPT PUSHER ADAPTER-CONNECT TO FAN | 1 | |
| PWA75735 | PUSHER JACKSCREW LPT | 1 | |
| PWA75751 | PUSHER JACKSCREW LPT | 1 | |
| PWA85079 | PUSHER JACKSCREW LPT | 1 | |
| PWC40387 | PUSHER-ADAPTER | 1 | |
| PWC40703 | PUSHER-ADAPTER | 1 | |
| PWC42043 | Pusher PT shaft | 3 | |
| PWC56414 | PT ROTOR PUSHER | 6 | |
| PWC63386 | ADAPTER - PUSHER | 1 | |
| PWC66378 | Pusher HPT Disc | 1 | |
| RB PWC71026 | Puller / Pusher Adapter | 1 | |
| RB6893359 | Pusher, Separating Power Turbine & Gas Producer Turbine Supts | 2 | |
| RB6893505 | PUSHER, PTO SEAL | 2 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
