| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 0292508060 | PT BEARING | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 0292702360 | STRAP,PT BEARING | 1 | |
| 0298727910 | PIPE,PT BEARING RETURN,SECT.1 | 1 | |
| 0298727920 | PIPE,AIR VENT, PT BEARING | 1 | |
| 109-0110-81-1 | ADAPTER SLEEVE,BEARING | 1 | |
| 109-3101-39-1 | ADAPTER ASSY M/R HING DUBLEX BEARING | 1 | |
| 109-3101-40-1 | ADAPTER ASSY M/R HING DUBLEX BEARING | 1 | |
| 109-3101-63-1 | ADAPTOR, BEARING OUTER REMPLA | 1 | |
| 10C1010G01 | TORQUE ADAPTER, INSTALL AND REMOVE - NO. 3 BEARING LOCK NUT, | 1 | |
| 114-1077 | OUTBOARD WHEEL-HALF, BEARING CUP REMOVAL SUPPORT ADAPTER | 4 | |
| 11C3053 | ADAPTER - TORQUE-INSTALL/REMOVE NO 3 BEARING LOCKNUT | 1 | |
| 11C3144 | ADAPTER - TORQUE - SPANNER NUT - INNER RACE NO 4 BEARING | 1 | |
| 11C3454 | FIXTURE - FLOW CHECK-NO 5 LPT BEARING DAMPER | 1 | |
| 11C4583 | ADAPTER WRENCH NO 2 BEARING MID NUT | 1 | |
| 11C4583G04 | ADAPTER WRENCH ADVANCE - NO. 2 BEARING MID NUT | 1 | |
| 11MIT65B01231-1 | TORQUE ADAPTER -0 BEARING | 1 | |
| 1C5678 | ADAPTER, PULLER - SEAL, NO. 6R BEARING | 1 | |
| 2001153 | Rx towbar for Lockheed Martin C-130 Series aircraft family. Heavy duty steel towbar features linear & radial shear protection, hydraulic lift kit, road speed rated wheels-hubs and bearing. 15 foot long towbar ships fully assembled except for tube haves | 1 | |
| 2024333-1 | BEARING REMOVAL ADAPTER | 1 | |
| 21C7250G01 | NO 3 BEARING GUIDE ADAPTER | 1 | |
| 21C7773P01 | NO. 3 BEARING BALL RETAINER ADAPTER | 1 | |
| 21C8886G01 | TORQUE ADAPTER HORIZONTAL NO 1 BEARING | 1 | |
| 23006778- | GUIDE BEARING SPUR ADAPTER GEARSHAFT (PM) | 5 | |
| 2550730 | Adapter – Bearing Sleeve assy. | 1 | |
| 2558538 | BEARING CUP INSTALLATION ADAPTER | 2 | |
| 2558629 | BEARING CUP INST. ADAPTER | 4 | |
| 2558788 | OUTBOARD WHEEL-HALF, BEARING CUP REMOVAL SUPPORT ADAPTER | 1 | |
| 2558806 | IB AND OB WHEEL HALF BEARING CUP SUPPORT ADAPTER | 4 | |
| 2558807 | INBOARD & OUTBOARD WHEEL HALF BEARING CUP SUPPORT ADAPTER | 3 | |
| 2560872 | IB AND OB WHEEL HALF BEARING CUP SUPPORT ADAPTER | 1 | |
| 2560908 | BEARING REMOVAL SUPPORT ADAPTER | 1 | |
| 23005426 | BEARING GUIDE-SPURADAPTER GEARSHA | 4 | |
| 23006778 | GUIDE BEARING SPUR ADAPTER GEARSHAFT (PM) | 5 | |
| 23034275 | ADAPTER--PILOT, COMPRESSOR REAR BEARING PULLER U | 1 | |
| 25558629 | IB WHEEL HALF BEARING CUP INSTALLER ADAPTER | 1 | |
| 289558-1 | ADAPTER THRUST SHAFT AND BEARING | 1 | |
| 294861-1 | BEARING REMOVAL ADAPTER | 1 | |
| 294861-2 | BEARING.REMOVAL ADAPTER | 1 | |
| 294866-1 | BEARING REMOVAL ADAPTER | 1 | |
| 294866-10 | BEARING REMOVAL ADAPTER | 1 | |
| 294866-2 | BEARING REMOVAL ADAPTER | 1 | |
| 294866-3 | BEARING REMOVAL ADAPTER | 1 | |
| 294866-4 | BEARING REMOVAL ADAPTER | 1 | |
| 294866-5 | BEARING REMOVAL ADAPTER | 1 | |
| 294866-6 | BEARING REMOVAL ADAPTER | 1 | |
| 294866-7 | BEARING REMOVAL ADAPTER | 1 | |
| 294866-8 | BEARING REMOVAL ADAPTER | 1 | |
| 2C14040G06 | TORQUE ADAPTER,NO. 4B BEARING | 1 | |
| 2C14199P102 | BEARING ADAPTOR SHAFT | 1 | |
| 2C14222G01 | STAND, INSTALL/REMOVE - HPT TURBINE ROTOR SHAFT SEALS AND BEARING RACES | 4 | |
| 2C14283 | ADAPTER KIT, LUBE/DRYOUT ENGINE BEARING | 1 | |
| 2C14283 REV C | ADAPTER KIT, LUBE/DRYOUT ENGINE BEARING | 1 | |
| 2C14664G01 | TORQUE ADAPTER SET, RETAINER NUT -NO. 5R BEARING INNER RACE | 4 | |
| 2C14670G04 | WRENCH, 4R BEARING INNER RACE RETAINING NUT ( WRENCH ) ( OPTIONAL ) | 1 | |
| 2C6009G01 | PULLER,ADAPTER-NO.4 BEARING AI | 1 | |
| 2C6047 | PULLER ADAPTER-NO. 4 BEARING | 2 | |
| 2C6047G01 | PULLER ADAPTER-NO. 4 BEARING | 1 | |
| 2C6047G02 | NO. 4 BEARING INNER RACES AND FORWARD SEAL PULLER ADAPTER | 1 | |
| 2C6627 | ADAPTER,INSTALL-NO.4B BEARING | 1 | |
| 2C6627G01 | ADAPTER,INSTALL-NO.4B BEARING | 1 | |
| 2C81050G01 | ADAPTER, TORQUE-LOCKNUT, NO. 5 BEARING INNER RACE | 3 | |
| 2C81178 | ADAPTER, TORQUE NO 3 BEARING L | 1 | |
| 2C81178G01 | ADAPTER, TORQUE NO 3 BEARING L | 1 | |
| 2C81178G03 | ADAPTER, TORQUE - NO. 3 BEARING LOCK | 1 | |
| 2C81505 | ADAPTER, TORQUE - NO.1 BEARING LOCKNUT | 1 | |
| 2C81505G01 | ADAPTER, TORQUE - NO.1 BEARING LOCKNUT | 1 | |
| 2C81652G01 | ADAPTER, INSTALL BEARING, AXIS | 1 | |
| 2C81653G01 | ADAPTER, INSTALL BEARING, AXIS | 1 | |
| 2C81656G01 | ADAPTER, REMOVAL, BEARING, AXI | 1 | |
| 2C81657G01 | ADAPTER, REMOVAL, BEARING, AXI | 1 | |
| 2C81658G01 | ADAPTER, REMOVAL, BEARING, AXI | 1 | |
| 2C81659G01 | ADAPTER, REMOVAL, BEARING, AXI | 1 | |
| 2C81661G01 | ADAPTER, REMOVAL, REAR BEARING | 1 | |
| 2C91125G01 | ADAPTER, NO. 5 BEARING LOCKNUT SPANNER | 1 | |
| 2C91175G01 | FIXTURE-REMOVAL PTO BEARING | 1 | |
| 2C91323G01 | ADAPTER - #1 BEARING - LOCKNUT | 1 | |
| 2MIT65B81276-1 | TORQUE WRENCH ADAPTER - NUT, BEARING RETAINER, ALTERNATE EXTENSION DRIVE, NOSE GEAR | 1 | |
| 3MIT65B01202-1 | PULLER -0 LOWER BEARING EQPT | 1 | |
| 407-FWU-OH-23 | ADAPTER BEARING INSTALLATION TOOL | 1 | |
| 5305427 | ADAPTER ASSY OF TUBE TO BOSS,OIL SUPPLY #5-6 BEARING | 1 | |
| 6795637 | ADAPTER, GP REAR BEARING NUT | 2 | |
| 6795645 | PULLER, PT REAR BEARING | 2 | |
| 6795985 | WRENCH, PT SHAFT BEARING RETAINING NUT | 2 | |
| 6795990 | DUMMY BEARING, PT SHAFT, FRONT | 2 | |
| 6872646 | GUIDE一SPUR ADAPTER GEARSHAFT BEARING | 2 | |
| 6893397 | INSTALL FUEL PUMP SPLINED ADAPTER BEARING DRIFT | 2 | |
| 6893724 | PTO BEARING PLATE PULLER | 2 | |
| 460006588 | Torque adaptor trunnion bearing A320 | 6 | |
| 6MIT65B01231-1 | TORQUE ADAPTER - BEARING RETAINER NUT, BODY LANDING GEAR | 4 | |
| 7ME65-73761-1 | MECH. EQPT. - SPANNER WRENCH, FWD TRUNNION BEARING (MLG) | 17 | |
| 833134-1 | BEARING REMOVAL ADAPTER | 1 | |
| 833465-1 | SET ADAPTERS BEARING PRESS | 1 | |
| 833978-1 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860165-1 OIL PUMP SPUR GEAR FROM 358027 BEARINGS) | 1 | |
| 833978-3 | Bearing Removal Adapter | 1 | |
| 833978-4 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860166-1 HIGH SPEED PINION GEAR FROM 3860158-1 BEARING) | 1 | |
| 833978-5 | BEARING REMOVAL ADAPTER (LOCATES IN SMALLER INSIDE DIAMETER OF 3860180-2 SPUR GEAR SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPUR GEAR FROM 3605094-1 BEARING) | 1 | |
| 833978-6 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860182-1 SPUR GEAR FROM | 1 | |
| 833978-7 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860182-1 SPUR GEAR FROM | 1 | |
| 833978-9 | BEARING REMOVAL ADAPTER (LOCATES IN SMALLER INSIDE DIAMETER OF 3860167-1 SPLINED SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPLINED SHAFT FROM 892575-1 BEARING) | 1 | |
| 834033-1 | BEARING REMOVAL SPLIT PLATE ADAPTER ASSY | 1 | |
| 834271-1 | Bearing Removal Adapter | 1 | |
| 834271-6 | BEARING REMOVAL ADAPTER | 1 | |
| 834718 | Adapter, Removal Bearing | 1 | |
| 834718-1 | ADAPTER REMOVAL BEARING | 1 | |
| 834826-1 | Bearing Removal Adapter | 1 | |
| 834826-1PM | BEARING REMOVAL ADAPTER | 1 | |
| 834833-1 | BEARING REMOVAL ADAPTER | 1 | |
| 835157-1 | Adapter Bearing | 1 | |
| 856A1000 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 2 | |
| 856A1000G01 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G02 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G03 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 3 | |
| 856A1000G04 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G05 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G06 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G07 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G08 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 4 | |
| 856A1000G09 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 6 | |
| 856A1130G07 | TOOL SET - JACKSCREWS (JACKSCREWS) 12 856A1136 ADAPTER, NO. 4 BEARING CTR TORQUE WRENCH TO COMBUSTI | 8 | |
| 856A1136 | ADAPTOR, NO 4. BEARING COUNTERTORQUE WRENCH TO COMBUSTION CASE | 1 | |
| 856A1136G02 | ADAPTER, NO. 4 BEARING CTR TORQUE WRENCH TO COMBUSTION CASE (ADAPTER) | 5 | |
| 856A2304G02 | ADAPTER TOOL SET, LIFT AND TURN - NO. 1 AND 2 BEARING SUPPORT (LIFT AND TURN ADAPTER) | 2 | |
| 856A2616G01 | SECTOR # CENTERING-LPT SHAFT FWD SEAL(TO CENTER LPT SHAFT RELATIVE TO FAN FRAME DURING NO. 1 AND NO. 2 BEARING SUPPORT MODULE REMOVAL/INSTALLATION) | 5 | |
| 856A3267 | ADAPTER, TEST RIG - NO. 1 AND 2 BEARING SUPPORT AIR FLOW CHECK (TEST RIG ADAPTER) | 1 | |
| 856A3267G02 | Adapter, Test Rig - No. 1 and 2 Bearing Support Air Flow Check (test rig adapter) | 10 | |
| 856A3328G01 | TOOL SET, ADAPTER - NO. 1 AND NO. 2 BEARING OIL NOZZLES AIR IMPINGEMENT (ADAPTER TOOL SET) | 5 | |
| 856A3440G01 | Toolset Ins/Rem Bearing Lpt | 1 | |
| 856A3440G02 | Toolset Ins/Rem Bearing Lpt | 1 | |
| 856A3469 | PULLER, FWD BALANCING BEARING LPT SHAFT | 1 | |
| 856A3469 REV A | PULLER, FWD BALANCING BEARING LPT SHAFT | 1 | |
| 856A3469G01 | PULLER. FWD BALANCING BEARING LPT SHAFT | 1 | |
| 856A3510G03 | 1 AND 2 BEARING SUPPORT ADAPTER, LIFT AND TURN - | 1 | |
| 856A3510G04 | 1 AND 2 BEARING SUPPORT ADAPTER, LIFT AND TURN - | 10 | |
| 856A3721 | ADAPTER TOOL SET LIFT AND TURN 1 & 2 BEARING SUPPORT | 1 | |
| 856A3721G01 | Adaptor Lift/Turn #1&2 Bearing Support | 1 | |
| 856A3721G02 | ADAPTER TOOL SET LIFT AND TURN 1 & 2 BEARING SUPPORT | 1 | |
| 856A3721G03 | ADAPTER TOOL SET LIFT AND TURN 1 & 2 BEARING SUPPORT | 11 | |
| 8C2547 | ADAPTER WRENCH ADVANCE - NO. 2 BEARING MID NUT | 1 | |
| 906224 | BALL ADAPTER BEARING | 1 | |
| 934826-1 | Bearing Removal Adapter Assembly | 1 | |
| 9560166950 | PIPE, PT BEARING DRAIN, FLEXIBLE | 1 | |
| 956A6028 | FIXTURE - LIFT VARIABLE CG - BEARING SPT 1 & 2 | 1 | |
| 956A6030 | FIXTURE - GUIDE - BEARING SPT 1-2 | 1 | |
| 956A6158 | TOOL KIT - INSTALL & REMOVAL - BEARING SPT 1 AND 2 (SP) | 1 | |
| 956A6483 | FIXTURE - PUSHER - LPT RING -SEAL BEARING 5 | 1 | |
| 956A6484 | DUMMY - LOCKING NUT - LPT BEARING -ROLLER 5 | 1 | |
| 956A6491 | FIXTURE - PULLER - LPT RING -SEAL BEARING 5 | 1 | |
| 956A8454 | CONTAINER - LPT N#5 BEARING ASSY | 1 | |
| 956A8498 | FIXTURE - RESTRAIN - LPT BEARING 5 ASSY | 1 | |
| 956A8520 | GUIDE - PIN - LPT BEARING 5 ASSY | 1 | |
| 956A8664 | PROTECTOR - LPT NO.5 BEARING ASSY | 1 | |
| 9C1912 | BEARING INSTALL/PTO GEARSHAFT | 1 | |
| 9C1913 | BEARING REMOVAL/PTO GEARSHAFT | 1 | |
| 9C2339 | WRENCH ADAPTER - NO 3 BEARING | 1 | |
| A12008-1 | LUBRICATION ADAPTER - AFT WHEEL WELL BULKHEAD, SPHERICAL BEARING | 12 | |
| A27040-18 | Checking Eqpt - Bearing Width | 2 | |
| A27070-61 | Bearing instl eqpt-rotary act/offset gearbox.l.e.slat dr | 1 | |
| A27070-65 | Bearing instl eqpt-rotary act/offset gearbox.l.e.slat dr | 1 | |
| A27114 | REM/INS EQPT PIVOT BEARING HORIZ STAB | 1 | |
| A27114-1 | Removal/instl eqpt-pivot bearing，horiz stabilizer | 12 | |
| A27122-1 | WRENCH EQPT - BEARING | 4 | |
| A27122-1-M | WRENCH EQPT -0 BEARING | 1 | |
| A32005-74 | REPLACEMENT EQPT SEAL - LOWER BEARING SEAL | 10 | |
| A32067-13 | PULLER EQPT-MLG BEARING | 1 | |
| A32107-1 | Replacement eqpt-lower bearing seals，MLG | 3 | |
| A52020-1 | Mandrel Eqpt - Bearing Installation | 1 | |
| A52030-1 | STAKING EQPT-GIRT BAR BEARING | 1 | |
| A52030-1-M | STAKING EQPT-GIRT BAR BEARING | 1 | |
| A55007 | REMOVAL/INSTL EQPT-PIVOT BEARING,HORIZ STABILIZER | 1 | |
| A55007-1 | Removeal/instl eqpt-pivot bearing horiz stabilizer | 6 | |
| ADP-00332 | Bearing bolt torque adapter | 1 | |
| AT-71055 | TORQUE ADAPTER, BEARING AND GLAND RETAINERS | 1 | |
| AT-71055 | Torque Adapter, Bearing and Gland Retainers | 1 | |
| AT-71055A | Torque Adapter, Bearing and Gland Retainers | 1 | |
| B32010-15 | BRAKE & BEARING EQPT | 18 | |
| B32010-15-M | BRAKE & BEARING EQPT | 1 | |
| B32024 | PULLER EQPT-LOWER BEARING SEAL RETAINER,NLG | 1 | |
| B32024-32 | NLG LOWER BEARING PULLER EQPT. | 1 | |
| B32024-82 | Puller Eqpt-NLG Bearing Seal | 9 | |
| B32024-84 | Puller Eqpt - Lower Bearing Seal Retainer, NLG | 6 | |
| B32025 | PULLER EQPT-LOWER BEARING SEAL RETAINER,MLG | 1 | |
| B32025-42 | PULLER EQPT - LOWER BEARING SEAL RETAINER - MLG | 4 | |
| B32025-78 | Puller Eqpt - Lower Bearing Seal Retainer, MLG | 10 | |
| B32066 | ROLLER SWAGING & REMOVAL EQPT -0 BEARING | 1 | |
| B32066-1 | Roller swaging & removal eqpt-bearing | 2 | |
| B57003 | ADAPTER EQPT -0 TRUNNION BEARINGS AND MOUNT, MLG | 1 | |
| B57003-3 | ADAPTER EQUIPMENT - TRUNNION BEARING AND MOUNT, MAIN LANDING GEAR (MLG) INSTALLATION AND REMOVAL | 2 | |
| B57003-33 | ADAPTER EQUIPMENT - TRUNNION BEARING AND MOUNT, MAIN LANDING GEAR (MLG) INSTALLATION AND REMOVAL | 11 | |
| B57003-34 | ADAPTER EQUIPMENT - TRUNNION BEARING AND MOUNT, MAIN LANDING GEAR (MLG) INSTALLATION AND REMOVAL | 2 | |
| B57003-4 | ADAPTER EQUIPMENT - TRUNNION BEARING AND MOUNT, MAIN LANDING GEAR (MLG) INSTALLATION AND REMOVAL | 1 | |
| B78017-1 | BEARING INSTL EQPT | 9 | |
| C32009-1 | Swaging Eqpt-Oversize NLG Bearing-Upper Drag Brace | 1 | |
| C32013-1 | Torque Wrench Adapter - Aft Bearing Retainer Nut, Main Landing Gear Trunnion | 16 | |
| C32013-15 | TORQUE WRENCH ADAPTER - AFT BEARING RETAINER NUT, MAIN LANDING GEAR TRUNNION | 8 | |
| C32013-16 | TORQUE WRENCH ADAPTER - AFT BEARING RETAINER NUT, MAIN LANDING GEAR TRUNNION | 4 | |
| C32013-9 | TORQUE WRENCH ADAPTER - AFT BEARING RETAINER NUT, MAIN LANDING GEAR TRUNNION | 4 | |
| C32017 | REPLACEMENT EQPT LWR BEARING SEALS MAIN LANDING GEAR | 1 | |
| C32017-1 | REPLACEMENT EQPT-LOWER BEARING SEALS MLG | 5 | |
| C32017-43 | REPLACEMENT EQPT - LOWER BEARING SEALS, MLG | 3 | |
| C32017-52 | REPLACEMENT EQPT - MLG LWR BEARING SEALS | 6 | |
| C32017-53 | Replacement Eqpt - MLG LWR Bearing Seals | 16 | |
| C32017-67 | REPLACEMENT EQPT - MLG LWR BEARING SEALS | 5 | |
| C32038 | ROD END BEARING RMVLjINSTL EQPT. ACTUATORS MLG | 1 | |
| C32038-55 | Rod End Bearing Rmvl Instl Eqpt - Actuators MLG | 6 | |
| C32038-81 | Rod end bearing rmvl/instl eqpt-actuators，MLG | 2 | |
| C54014-1 | BEARING REPLACEMENT EQPT | 6 | |
| D46463 | ADAPTER BEARING MLG | 1 | |
| D46969 | ADAPTER BEARING MLG | 6 | |
| DAH601788 | ADAPTOR,BEARING TORQUE | 1 | |
| DAPT60-0188-00 | BEARING WRENCH (ALTERNATIVE TO DAPT60-0115-00) | 8 | |
| DZZ0019-501 | Flap Bearing T/Adapt | 1 | |
| DZZ7280-1 | MLG BEARING TORQUE ADAPTER | 1 | |
| DZZ7297-1 | CLG LOWER BEARING TORQUE ADAPTER | 1 | |
| ES92000-1 | KRYPTO WHEEL W/O BEARING | 1 | |
| F72930-1 | MLG SIDESTRUT FWD BEARING ADAPTER | 1 | |
| F73012 | SWAGING EQPT -0 ROLLER USED TO SWAGE BEARINGS | 1 | |
| F80020-5 | ADAPTER WRENCH – MLG TRUNNION BEARING NUT | 16 | |
| F80176-1 | TORQUE WRENCH ADAPTER MLG TRUNNION AFT BEARING NUTX | 5 | |
| F80176-8 | Torque Wrench Adapter -Main Landing Gear Trunnion. Aft Bearing Nut | 16 | |
| F80176-8, | Torque Wrench Adapter - Main Landing Gear Trunnion, Aft Bearing Nut - 737-100 thru -500 L/N311 | 16 | |
| F80205-1 | BEARING SWAGINE EQPT | 3 | |
| F80251-1 | BEARING EQUPT. | 1 | |
| G27036 | MEASURING EQPT -0 HORIZ STAB HINGE BEARING | 1 | |
| G27036-143 | Measuring Eqpt - Horiz Stab Hinge Bearing Freeplay | 2 | |
| G27036-143 repair | Measuring eqpt-Joriz stab hinge bearing freeplay | 1 | |
| G27036-143-loading test/ inspection/ calibration | Measuring eqpt-Joriz stab hinge bearing freeplay | 1 | |
| G27036-186 | Measuring Eqpt - Horiz Stab Hinge Bearing Freeplay | 6 | |
| G27036-186-loading test/ inspection/ calibration | Measuring eqpt-Joriz stab hinge bearing freeplay | 1 | |
| G27036-74 | MEASURING EQPT - HORIZ STAB HINGE BEARING FREEPLAY | 4 | |
| G27036-75 | MEASURING EQPT - HORIZ STAB HINGE BEARING FREEPLAY | 1 | |
| G32019 | ROLLER SWAGING EQPT -0 OUTBD TRUNNION BEARING | 1 | |
| G32019-1 | Roller Swaging Eqpt - Outboarding Trunnion Bearing | 1 | |
| G32063-1 | Puller Eqpt - Shear Pin Bearing Housing WLG | 3 | |
| G52011 | GUIDE EQPT -0 CARRIER BEARING ASSY | 1 | |
| G52011-1 | Guide eqpt-carrier bearing assy | 1 | |
| G78004-12 | Installation/Removal Eqpt - Oversize Bearing | 1 | |
| HS6651 | ROTOR BEARING ADAPTOR | 2 | |
| HU18493 | BEARING ADAPTER | 1 | |
| HU21570 | ADAPTER - FRONT BEARING HOUSING AND LOW PRESSURE BEARING FEED | 1 | |
| HU21572 | ADAPTER - DISTRIBUTOR BLOCK TO INT. WHEEL CASE & TURBINE BEARINGS | 1 | |
| HU22699 | ADAPTER - BEARING, L.P. TURBINE | 1 | |
| IAE1J12119 | ADAPTER EXTENSION INTERNAL GEARBOX AND BEARING SUPPORT ASSY INTERMEDIATE | 1 | |
| IAE1P17038 | PULLER-TURBINE EXHAUST BEARING COMPT CVR | 18 | |
| INSTALLATION REMOVAL LPT | INSTREMOVAL LPT BRAKET BEARING ASSY TOOL | 1 | |
| IPPLP-P21160 | ADAPTER KIT TO CONVERT PORTABLE PROOF LOAD KIT TO SUIT P21160 BEARINGS. | 1 | |
| IPPLP-P21760 | ADAPTER KIT TO CONVERT PORTABLE PROOF LOAD KIT TO SUIT P21760 BEARINGS. | 1 | |
| IPPLP-P24490 | ADAPTER KIT TO CONVERT PORTABLE PROOF LOAD KIT TO SUIT P24490 BEARINGS | 1 | |
| IPPLP4103-8 | ADAPTER KIT TO CONVERT PORTABLE PROOF LOAD KIT TO SUIT MS14103-8 BEARINGS | 1 | |
| IPPLP4104-10 | ADAPTER KIT WHICH IS ABLE TO BE USED TOGETHER WITH? DIGITAL LOAD MITER IHH500 PRO; ELECTRONIC PROOF LOAD CELL WITH A MAXIMUM LOAD CAPACITY 5 000 POUNDS (FOR BEARING MS14102-10) | 1 | |
| IPPLP4104-14 | ADAPTER KIT WHICH IS ABLE TO BE USED TOGETHER WITH? DIGITAL LOAD MITER IHH500 PRO; ELECTRONIC PROOF LOAD CELL WITH A MAXIMUM LOAD CAPACITY 5 000 POUNDS (FOR BEARING MS14102-14) | 1 | |
| IPPLP4104-6 | ADAPTER KIT WHICH IS ABLE TO BE USED TOGETHER WITH DIGITAL LOAD MITER IHH500 PRO; ELECTRONIC PROOF LOAD CELL WITH A MAXIMUM LOAD CAPACITY 5 000 POUNDS (FOR BEARING MS14102-6) | 1 | |
| IPPLP4104-7 | ADAPTER KIT WHICH IS ABLE TO BE USED TOGETHER WITH? DIGITAL LOAD MITER IHH500 PRO; ELECTRONIC PROOF LOAD CELL WITH A MAXIMUM LOAD CAPACITY 5 000 POUNDS (FOR BEARING MS14104-7) | 1 | |
| J27057-21 | Measurement eqpt-bearing width | 1 | |
| J27057-22 | Mearuring Eqpt-Bearing Width | 1 | |
| J27057-29 | Measurement eqpt-bearing width | 2 | |
| J32014-116 | Replacement Eqpt - Lower Bearing Seals, NLG | 11 | |
| J32014-89 | REPLACE EQPT LWR BEARING SEAL MLG | 2 | |
| J32082 | RPLACEMENT EQPT.LOWER BEARING SEALS MLG | 1 | |
| J32082-1 | REPLACEMENT EQPT-LOWER BEARING SEALS,MLG | 1 | |
| J32082-69 | Replacement Eqpt - Lower Bearing Seals MLG | 1 | |
| J32082-73 | Replacement Eqpt. - Lower Bearing Seals MLG | 6 | |
| J32082-98 | Replacement eqpt-lower bearing seals，MLG | 8 | |
| J46098 | TORQUE ADAPTER BEARING | 1 | |
| J46100 | TORQUE ADAPTER BEARING | 1 | |
| J55001-1 | Bearing Eqpt - Horizontal Stabilizer, R/I | 1 | |
| J55001-13 | Bearing Eqpt | 3 | |
| J55001-13-M | BEARING EQPT | 1 | |
| J55001-16 | Bearing Eqpt - Horiz Stabilizer Rmvl Instl | 6 | |
| K32011 | REPLACEMENT EQPT -0 LOWER BEARING SEALS, MLG | 1 | |
| K32011-1 | Replacement Eqpt - Lower Bearing Seals MLG | 2 | |
| K32011-56 | Replacement Eqpt - MLG Lower Bearing Seals | 2 | |
| K32011-63 | Replacement eqpt-lower bearing seals，MLG | 3 | |
| K32011-64 | Replacement eqpt-lower bearing seals，MLG | 2 | |
| K32011-90 | Replacement eqpt-lower bearing seals，MLG | 4 | |
| K32011-91 | Replacement eqpt-lower bearing seals，MLG | 6 | |
| MIT65B13164 | ADAPTER - WRENCH, BEARING NUT, MAIN ENTRY DOOR | 6 | |
| MMG060-01 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-02 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-04 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-05 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-12 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-19 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-22 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-23 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-24 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-25 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-29 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-31 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-32 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-33 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| OTC 1921 | 2 1/2 INCH 6PT TRUCK WHEEL BEARING LOCKNUT SOCKET | 1 | |
| PT280-243 | BEARING FOR PT280THUGA | 1 | |
| PWA 27251 | ADAPTER MAIN GEARBOX BEARING OIL NOZZLES | 2 | |
| PWA106220 | ADAPTER, VACUUM CHECK - NO. 5 BEARING COMPARTMENT | 1 | |
| PWA27397 | DRIFT - LPC & HPT BAL ARBOR BEARING_[PWA27397] | 1 | |
| PWA45849 | ANTI-ROTATION ADAPTER NO.2 BEARING | 3 | |
| PWA85843 | ADAPTER - TEST, NUMBER 3 BEARING COMPARTMENT VACUUM | 1 | |
| PWA86087 | ADAPTER INSPECTION #1 BEARING | 1 | |
| PWA88125 | ADAPTER - N4 BEARING COMPARTMENT SCAVENGE TUBE | 1 | |
| PWC31687 | RIVETER, HPT DISK /POST-SB7306 BELLCRANK, NO.4 BEARING HSG. COVER BOLTS | 1 | |
| PWC37030 | ADAPTER, MEASURING, OIL PUMP SHAFT BEARING | 1 | |
| PWC37796 | ADAPTER, NO. 3 BEARING RUNNER PULSE PICK-UP | 1 | |
| PWC37824 | ADAPTER, UPPER ANGLE DRIVE BEARING GAGING | 1 | |
| PWC37828 | ADAPTER, MEASURING, OIL PUMP TRANSFER BEARING | 1 | |
| PWC38424 | ADAPTER BEARING | 1 | |
| PWC38557 | Adapter, No 11 Bearing Retaining Nut Anti-rotation | 1 | |
| PWC40292 | ADAPTER BEARING SEAL | 1 | |
| Q46679 | TORQUE ADAPTER FOR SPHERICAL BEARING ASSEMBLY | 1 | |
| Q46680 | TORQUE ADAPTER FOR SPHERICAL BEARING | 1 | |
| Q46681 | TORQUE ADAPTER FOR SPHERICAL BEARING | 1 | |
| Q46682 | TORQUE ADAPTER FOR SPHERICAL BEARING ASSEMBLY | 1 | |
| RB T101859 | Press Adapter, Bearing Inner Ring | 1 | |
| RB T103003 | Adapter, Main Trans Input Pinion Bearing Removal | 1 | |
| RB T103101 | Adapter, Main Trans Input Bearing Installation | 1 | |
| RB T103110 | Adapter, Bearing Install | 1 | |
| RB T103114 | Main Transmission Bearing Removal Adapter | 1 | |
| RB T103116 | Main Transmission Bearing Install Adapter | 1 | |
| RB T103131 | Transmission Bearing Install/Removal Adapter | 1 | |
| RB T103135 | Adapter Bearing Bar | 1 | |
| RB T103168 | Bearing Removal Adapter | 1 | |
| RB23006778 | Guide Bearing Spur Adapter Gearshaft C-20 | 2 | |
| RB23034275 | Adapter-Pilot, Rear Compressor Bearing Puller | 1 | |
| RB6893397 | Install Fuel Pump Splined Adapter Bearing Drift | 2 | |
| SIRB90-15C | ADPT RING 89 99MM BEARINGS | 1 | |
| SPL-11076 | AFT BEARING NUT TORQUE WRENCH ADAPTER, MAIN LANDING GEAR | 1 | |
| ST2580-267 | SPANNER WRENCH ADAPTER FOR BACN10RF BEARING RETAINER NUTS | 14 | |
| ST2580-267-XX-X-X | WRENCH - SPANNER ADAPTER FOR BACN10RF BEARING RETAINER NUTS (ST2580-267 DRAWING) | 1 | |
| T-71043A | Torque Adapter, Rod Bearing Retainer | 1 | |
| T103-165 | MAST BEARING INSTALLATION AND REMOVAL SPLINED ADAPTER | 1 | |
| В78017-1 | INSTALLATION EQPT - BEARING-LEAD SCREW, T/R NONLOCKING ACTUATOR ASSY | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
