| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 98A55307626106 | PRESS TUBE | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 057840099 | Schrader 5784 High Pressure Strut Coupler - 716-20 thread for 14 tube - 5,000 PSIG | 2 | |
| 10C1401G01 | BORESCOPE GUIDE TUBE-LOW PRESSURE TURBINE SHROUD | 1 | |
| 10C1401P01 | BOROSCOPE GUIDE TUBEOW PRESSURE TURBINE SHROUD | 1 | |
| 11C3416 | FIXTURE - NUT STARTER-SUPPORT TUBE - HP COMPRESSOR ROTOR | 1 | |
| 11C3416G01 | Fixture, Nut Starter-Support Tube，Hp Compressor Rotor | 1 | |
| 131.11 | BOURDON TUBE PRESSURE GAUGE STAINLESS STEEL COMPACT VERSION NS 40 (1 1/2"), 50 (2") AND 63 (2 1/2") | 1 | |
| 133-80-1419 | CENTER VENT TUBE PRESSURE TEST KIT | 1 | |
| 15000 PSI GAUGE | MCDANIEL CONTROLS INC PRESSURE 0 15000 PSI GAUGE 316 SS TUBE AND SOCKET | 1 | |
| 15000 PSI Gauge | McDaniel Controls Inc Pressure 0 15000 PSI Gauge 316 SS Tube and socket | 1 | |
| 196-64509-405 | HYD TUBE PRESSURE | 1 | |
| 196-64879-403 | TUBE ASSY,HYDR SYS,PRESSURE | 1 | |
| 196-66031-403 | TUBE ASSY,HYDR SYS,PRESSURE | 1 | |
| 1C6881 | TEST SET, PRESS CHK FUEL SHRD MNFLD & FEEDER TUBE | 1 | |
| 1C6881 REV B | TEST SET, PRESS CHK FUEL SHROUDED MNFLD & FEEDER TUBE | 1 | |
| 1C6952P01 | Wrench, Spanner - Oil Tube High Pressure Turbine Rotor | 1 | |
| 1C9397G01 | HOLDER, SHIM - HP TURB PRESSURE TUBE ADAPTER | 1 | |
| 1C9626 | TORQUE ADAPTER - PRESSURE TUBE | 1 | |
| 1C9626G01 | Torque Adapter, Pressure Tube/Coupling Nut-Hpt Rotor | 1 | |
| 201440205 | EYE END # OUTER TUBE, COMPRESSION SPRING | 1 | |
| 2024573-1 | PRESSURE DROP TUBE SET | 1 | |
| 2024875-1 | PRESSURE DROP TUBE SET | 1 | |
| 2024875-1000 | PRESSURE DROP TUBE (P/O P/NO. 2024875-1) | 1 | |
| 2024875-1001 | PRESSURE DROP TUBE (P/O P/NO. 2024875-1) | 1 | |
| 20C6092G01 | WRENCH,PRESSURE TUBE REMOVAL | 1 | |
| 2167M24G01 | Pressure test tooling for 1.75" od tube | 1 | |
| 218A6671-145 | TUBE ASSY - FIRE SUPPRESSION | 1 | |
| 232.30.063 | WIKA BOURDON TUBE PRESSURE GAUGE | 1 | |
| 247C5071G02 | Torque Adapter,Pressure Tube Coupling Nut | 1 | |
| 296328-1/-2 | Reducer Tube Press Fixture | 1 | |
| 2A2231-01 | TUBE - PRESS, NO.5BRG, ASSY OF | 1 | |
| 2A3091-01 | TUBE — PRESS, NO. 5 BRG, ASSY OF | 1 | |
| 2C14040 | WRENCH, PRESS. TUBE - COUPLING NUT, HP TURB. ROTOR | 1 | |
| 2C14040 REV M | WRENCH, PRESS. TUBE - COUPLING NUT, HP TURB. ROTOR | 1 | |
| 2C14040G01 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | 1 | |
| 2C14040G02 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | 1 | |
| 2C14040G03 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | 1 | |
| 2C14040G04 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | 1 | |
| 2C14040G05 | WRENCH, PRESS. TUBE-COUP.NUT HPTR | 3 | |
| 2C14040G06 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | 1 | |
| 2C14040G07 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | 2 | |
| 2C14040G08 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | 1 | |
| 2C1404G05 | TORQUE ADAPTER, PRESSURE TUBE | 1 | |
| 2C15042G03 | Pressure Tube Coupling Nut Gage | 2 | |
| 2C6092 | WRENCH, SPNR - PRESS TUBE, HIGH PRESS TURB ROTOR | 1 | |
| 2C6092 REV F | WRENCH, SPANNER - PRESS. TUBE, HIGH PRESS. TURB. ROTOR | 1 | |
| 2C6189 | ADAPTER, PRESSURE TUBE ADAPTER | 1 | |
| 2C6189G01 | WRENCH-PRESSURE TUBE,HPT ROTOR | 1 | |
| 2C6189G07 | Adapter,pressure tube adapter | 1 | |
| 2C8016G01 | VSV Sight Gage (80C2) HPT Pressure Tube | 2 | |
| 3028573 | TUBE ASSEMBLY AIR PRESS REAR | 1 | |
| 30P782512000-501 | LEFT PRESSURE TUBE | 1 | |
| 314STD-53-0007 | FUSELAGE – REPLACEMENT OF THE PRESSURE TUBE SUPPORT OF THE FUEL SYSTEM | 1 | |
| 3885011-1 | TUBE ASSY-TOTAL PRESS | 1 | |
| 5051T46G01 | TUBE, B SUMP DELTA PRESSURE | 1 | |
| 523199-3 | HYDR.FOOT PUMP WITHOUT PRESSURE TUBE AND CRIMPING HEAD | 6 | |
| 5308184 | SHIELD PRESSURE TUBE TURBINE EXHAUST CASE | 1 | |
| 571-523199-3 | HYDR.FOOT PUMP WITHOUT PRESSURE TUBE AND CRIMPING HEAD | 1 | |
| 60-3200-0010 | TUBE - MANIFOLD PRESSURE RH | 3 | |
| 63687-1 | ORAL TUBE PRESSURE TEST ADAPTER | 2 | |
| 65C26810-3144 | TUBE ASSY- EMER BRAKE PRESSURE | 1 | |
| 65C26840-3087 | TUBE ASSY HYD STBY SYS PRESS | 1 | |
| 67220647-1 | PRESSURE DROP TUBE | 1 | |
| 67220647-2 | PRESSURE DROP TUBE | 1 | |
| 6798787 | FIXTURE - PRESSURE CHK, COMP DISCHARGE AIR TUBE AS | 1 | |
| 6799952 | CLAMP INSTALLATION COMPRESSOR DISCHARGE AIR TUBE TO OUTER COMBUSTION CASE | 3 | |
| 6799953 | CLAMP-INSTALLATION, COMPRESSOR DISCHARGE AIR TUBE-TO-COMPRESSOR SCROLL | 3 | |
| 6872601 | FIXTURE - WELDING, COMPRESSOR DISCHARGEAIR TUBE | 1 | |
| 6872603 | FIXTURE - PRESSURE TEST, COMP DISCHARGE AIR TUBE | 1 | |
| 6895994 | COMPRESSOR DISCHARGE AIR TUBE PRESSURE TEST FIXTURE | 1 | |
| 7416805-1 | PRESSURE DROP TUBE SET | 1 | |
| 781019-0 | HYDR.FOOT PUMP WITHOUT PRESSURE TUBE AND CRIMPING HEAD | 2 | |
| 833289-1/-2 | Reducer Tube Press Fixture | 1 | |
| 856A3790G01 | LOW PRESSURE TURBINE REAR VENT TUBE FIXTURE | 7 | |
| 856A3793 | LOW PRESSURE TURBINE CENTER VENT TUBE FIXTURE | 3 | |
| 8816540000 | OIL PRESSURE TAPPING TUBE | 1 | |
| 8817027000 | TUBE, OIL PRESSURE TAPPING | 1 | |
| 956A1237 | GUIDE TUBE - BORESCOPE - HPT/HP COMPRESSOR JOINT | 1 | |
| AC 20-1005P-02L-600# | commercial pressure gauge, 2.5in dial, black ABS case, bronze tube, 1/4in NPT lower connection, 0-600PSI range | 1 | |
| AC 25-1001TH-01B-XUC-160# | panel pressure gauge, 2.5in dial, steel case, bronze tube, 1/8in NPT back connection, U clamp, 0-160PSI range | 1 | |
| AC 25-1009AW-02L-XC4LL-1000# | pressure gauge, 2.5in dial, SS case, bronze tube, 1/4in lower connection, calibration cert, Plus! option, 0-1000PSI range | 1 | |
| AC 25-1009AW-02L-XC4LL-30# | pressure gauge, 2.5in dial, SS case, bronze tube, 1/4in NPT lower connection, calibration cert, Plus! option, 0-30PSI range | 1 | |
| AC 25-1009AW-02L-XC4LL-300# | pressure gauge, 2.5in dial, SS case, bronze tube, 1/4in NPT lower connection, calibration cert, Plus! option, 0-300PSI range | 1 | |
| AC 25-1009AW-02L-XC4LL-60# | pressure gauge, 2.5in dial, SS case, bronze tube, 1/4in NPT lower connection, calibration cert, Plus! option, 0-60PSI range | 1 | |
| AC 25-1009SW-02L-XC4LL-100# | pressure gauge, 2.5in dial, SS case, 316SS tube, 1/4in lower connection, calibration cert, Plus! option, 0-100PSI range | 1 | |
| AC 25-1009SW-02L-XC4LL-10000# | pressure gauge, 2.5in dial, SS case, 316SS tube, 1/4in lower connection, calibration cert, Plus! option, 0-10,000PSI range | 1 | |
| AC 25-1009SW-02L-XC4LL-3000# | pressure gauge, 2.5in dial, SS case, 316SS tube, 1/4in NPT lower connection, calibration cert, Plus! option, 0-3,000PSI range | 1 | |
| AC 30-1084S-02L-XC4-100# | test pressure gauge, 3in dial, SS case, 316SS tube, 1/4in lower connection, calibration cert, 0-100PSI range | 1 | |
| AC 30-1084S-02L-XC4-60# | test pressure gauge, 3in dial, SS case, 316SS tube, 1/4in lower connection, calibration cert, 0-60PSI range | 1 | |
| AC 35-1009SW-02B-XC4LL-5000# | pressure gauge, 3.5in dial, SS case, 316SS tube, 1/4in NPT lower back connection, calibration cert, Plus! option, 0-5,000PSI range | 1 | |
| AC 45-1279SS-04L-XC4LL-10000# | pressure gauge, 4.5in dial, black phenolic case, 316SS tube, 1/2in lower connection, calibration cert, Plus! option, 0-3,000PSI range | 1 | |
| AC 45-1279SS-04L-XC4LL-3000# | pressure gauge, 4.5in dial, black phenolic case, 316SS tube, 1/2in NPT lower connection, calibration cert, Plus! option, 0-3,000PSI range | 1 | |
| AC 45-1279SS-04L-XC4LL-4000# | pressure gauge, 4.5in dial, black phenolic case, 316SS tube, 1/2in NPT lower connection, calibration cert, Plus! option, 0-4,000PSI range | 1 | |
| AC 45-1279SS-04L-XC4LL-5000# | pressure gauge, 4.5in dial, black phenolic case, 316SS tube, 1/2in NPT lower connection, calibration cert, Plus! option, 0-4,000PSI range | 1 | |
| AC 50-1008S-02L-600# | pressure gauge, 50mm (2in) dial, SS case, 316SS tube, 1/4in NPT lower connection, 0-600PSI range | 1 | |
| AC 63-1008A-02L-30# | pressure gauge, 63mm dial, SS case, bronze tube, 1/4in NPT lower connection, 0-30PSI range | 1 | |
| AGE-01524-401 | TUBEADAPTER, SET-TESTPRESSURIZATIONBOOTH | 2 | |
| AN929-3 | ALI CAP ASSY, PRESSURE SEAL FLARED TUBE FITTING | 8 | |
| AN929-3D | ALI CAP ASSY, PRESSURE SEAL FLARED TUBE FITTING | 5 | |
| AN929-4 | CAP ASSY-.25 TUBE-PRESS. SEAL | 10 | |
| AN929-4D | ALI CAP ASSY, PRESSURE SEAL FLARED TUBE FITTING | 11 | |
| AN929-4J | CAP ASSY PRESS. SEAL FLARED TUBE FITTING | 23 | |
| AN929-5D | ALI CAP ASSY, PRESSURE SEAL FLARED TUBE FITTING | 10 | |
| AN929-6 | CAP ASSY-.38 TUBE-PRESS. SEAL | 15 | |
| AN929-6D | ALI CAP ASSY, PRESSURE SEAL FLARED TUBE FITTING | 12 | |
| AN929-6J | CAP ASSY, PRESS SEAL, FLARED TUBE FTG | 18 | |
| AN929-8D | ALI CAP ASSY, PRESSURE SEAL FLARED TUBE FITTING | 8 | |
| AN929−6 | CAP INSERT, ASSEMBLY, PRESSURE SEAL, FLARED TUBE FITTING | 15 | |
| AS21914C | AS21914C - CAP, PRESSURE SEAL, FLARELESS TUBE FITTIN | 1 | |
| AS5231J10 | Plug - Hydraulic Pressure Tube, 5/8 Inch Line, Corrosion Resistant Steel | 1 | |
| AS5233V06P | CAP ASSEMBLY - PRESSURE SEAL, FLARELESS TUBE, STD- | 1 | |
| BACC14AD-04 | ASSEMBLY - CAP, PRESSURE SEAL, FLARELESS TUBE (STANDARD | 1 | |
| BACC14AD06 | CAP ASSEMBLY - PRESSURE SEAL, FLARELESS TUBE, STD- | 2 | |
| BACP20AU10J | PLUG - HYDRAULIC PRESSURE TUBE, 5/8 INCH LINE, CORROSION RESISTANT STEEL | 1 | |
| C21007-39 | Pressure Tube | 1 | |
| C21007-9 | Pressure Tube Assy | 1 | |
| CH1543-0042 | PRESSURE BLANKING PLUG FOR CONDUCTING TEST ON GUIDE TUBE ASSY (P/N CH1543A0011) | 1 | |
| CJMDS36-0002 | HIGH-PRESSURE BLEED AIR SHUTOFF-VALVE TEST TUBE | 1 | |
| CJMDS36-002 | HIGH-PRESSURE BLEED AIR SHUTOFF VALVE TEST TUBE | 1 | |
| CJMDX21-001 | TOOL TUBE KIT PRESSURE | 5 | |
| G36009 | PLUG EQUIPMENT -0 DUCT/TUBE PRESSURE TEST | 1 | |
| G36009-1 | PLUG EQUIPMENT - DUCT/TUBE PRESSURE TEST | 1 | |
| G36009-2 | PLUG EQUIPMENT - DUCT/TUBE PRESSURE TEST | 1 | |
| G36009-3 | PLUG EQUIPMENT - DUCT/TUBE PRESSURE TEST | 1 | |
| GI-23413-1 | TRANSFER TUBE SEAL COMPRESSOR | 1 | |
| GS10295 | TUBE ASSY-PRESSURE PICKUP | 1 | |
| GS23137-1 | COMPRESSOR, TRANSFER TUBE SEAL (FOR PROPELLER TYPE 247F) | 8 | |
| GS23409-1 | TRANSFER TUBE SEAL COMPRESSOR | 1 | |
| GS23411-21 | INNER TRANSFER TUBE SEAL COMPRESS. | 1 | |
| GS23413-1 | TRANSFER TUBE SEAL COMPRESSOR | 17 | |
| GS234131 | TRANSFERT TUBE SEAL COMPRESSOR | 17 | |
| GS23423-1 | COMPRESSER TRANSFER TUBE SEAL ATR 42 -500 | 1 | |
| GS23444-1 | Transfer Tube Tube Seal Compressor | 9 | |
| HER-06 | FLEXIBLE TUBE COMPRESSOR WASHING | 1 | |
| HTE29671 | PRESSURE TEST FIXTURE FOR CONDUCTING TEST ON GUIDE TUBE ASSY (P/N CH1543A0011) | 1 | |
| HU28856-1 | Shaft - Drawbar & Guide, LP Compressor Shaft Oil Tube - RB211-535E4 Engine | 1 | |
| HU38949 | GUIDE-TUBE BSI STG.7 IP COMPRESSOR | 3 | |
| IAE1R18593-1 | V2500 TUBE REPAIR KIT PRESSURE TOOLING KEY AUDIT PURPOSE | 1 | |
| J02998 | GAUGE,PRESSURE,2 1/2IN FACE SIZE,0 TO 160PSI RANGE, FACE SCALE UNITS PSI/KPA,SS CASING,316SS BOURDON TUBE, TIP AND SOCKET, HELICAL TUBE,1/4IN,NPT PN: J02998 OEM: ASHCROFT | 1 | |
| J20998 | GAUGE,PRESSURE,2 1/2IN FACE SIZE,0 TO 160PSI RANGE,FACE SCALE UNITS PSI/KPA,SS CASING,316SS BOURDON TUBE,TIP AND SOCKET,HELICAL TUBE,1/4IN,NPT PN: J02998 OEM: ASHCROFT | 1 | |
| KMASS CONTROLS HOSE PX TEST RIG | TUBE PRESSURE TEST RIG | 1 | |
| L50001T04 | LIGHTWEIGHT HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| L50001T06 | LIGHTWEIGHT HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| L50001T08 | LIGHTWEIGHT HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| L51001T04 | LIGHTWEIGHT HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO ARCSEAL-MALE) | 1 | |
| L51021T04 | LIGHTWEIGHT HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO ARCSEAL-FEMALE) | 1 | |
| LTCT13442 | FIXTURE, PRESSURE CHECK - TUBE ASSY | 1 | |
| LTCT30835-01 | Fixture, Pressure, Check Tube Assembly | 1 | |
| MODEL 884FY-24 | ADAPTER KIT, 856NM 1/2 PITOT-STATIC TUBE PRESSURE TEST | 1 | |
| MODEL884FY-23 | ADAPTER KIT, PITOT-STATIC TUBE PRESSURE TEST. | 1 | |
| MS21914-10 | CAP ASSY, PRESS-TUBE, FLARELESS | 17 | |
| MS21914-12 | Cap，pressure seal，flareless tube fitting | 16 | |
| MS21914-12D | Cap，pressure seal，flareless tube fitting | 3 | |
| MS21914-14 | Cap，pressure seal，flareless tube fitting | 1 | |
| MS21914-16 | Cap，pressure seal，flareless tube fitting | 8 | |
| MS21914-2 | Cap，pressure seal，flareless tube fitting | 10 | |
| MS21914-20 | Cap，pressure seal，flareless tube fitting | 3 | |
| MS21914-22 | CAP,PRESSURE SEAL,FLARELESS TUBE FITTING | 1 | |
| MS21914-24 | Cap，pressure seal，flareless tube fitting | 4 | |
| MS21914-3 | Cap，pressure seal，flareless tube fitting | 15 | |
| MS21914-4 | Cap，pressure seal，flareless tube fitting | 24 | |
| MS21914-4J | Cap，pressure seal，flareless tube fitting | 1 | |
| MS21914-4W | Cap，pressure seal，flareless tube fitting | 8 | |
| MS21914-5 | Cap，pressure seal，flareless tube fitting | 18 | |
| MS21914-5W | Cap，pressure seal，flareless tube fitting | 2 | |
| MS21914-6 | Cap，pressure seal，flareless tube fitting | 19 | |
| MS21914-6J | Cap，pressure seal，flareless tube fitting | 1 | |
| MS21914-7 | Cap，pressure seal，flareless tube fitting | 1 | |
| MS21914-8 | CAP ASSY, PRESS-TUBE, FLARELESS | 15 | |
| MS21914V12P | CAP ASSEMBLY, FLARELESS PRESSURE TUBE | 6 | |
| MS21921-16 | Cap，pressure seal，flareless tube fitting | 3 | |
| MS21921-20 | Cap，pressure seal，flareless tube fitting | 1 | |
| MS21921-24 | Cap，pressure seal，flareless tube fitting | 1 | |
| MS9314-04 | STATIC PRESSURE TUBE CAP | 11 | |
| MS9314-04, | STATIC PRESSURE TUBE CAP | 11 | |
| MS9513-04 | ASSEMBLY - CAP, PRESSURE SEAL, FLARELESS TUBE | 1 | |
| MS9513-04 9 | ASSEMBLY - CAP, PRESSURE SEAL, FLARELESS TUBE | 1 | |
| MT329-10 | TUBE-PRESS EXTENSION | 1 | |
| MT972-008 | BORO GUIDE TUBE L. PRESS TURB SHROUD | 1 | |
| P60373 | COVER, SHIPPING (OIL TANK PRESSURE TUBE) | 1 | |
| P60382 | COVER-SHIPPING (OIL TANK PRESSURE TUBE) | 1 | |
| PWA 12812 | Fixture Compr.rear bearing seal air pressure tube | 1 | |
| PWA 30073 | WRENCH REAR COMPRESS0R SEALING TUBE NUT | 1 | |
| PWA 30074 | HOLDER REAR COMPRESS0R SEALING TUBE NUT | 1 | |
| PWA 45256 | INLET PRESSURE PROBES WITH TUBES | 1 | |
| PWA102120 | INTERMEDIATE PRESSURE TUBE REMOVAL FIXTURE | 1 | |
| PWA103684 | TURBINE EXHAUST CASE, NO.5 BEARING PRESSURE TUBE | 2 | |
| PWA45256 | INLET PRESSURE PROBES WITH TUBES | 1 | |
| PWA45363 | REGULATOR ASSY AIR PRESSURE 4 BRG OIL TUBES | 1 | |
| PWA84866 | Expander Tube - Compressor Rotor Assy | 1 | |
| PWC30128-06 | PULLER, NO.4 BEARING PRESSURE/SCAVENGE OIL TUBES | 7 | |
| PWC32271 | COMPRESSOR WASH NOZZLE (SPRAY TUBE) | 12 | |
| PWC34295 | TUBE, TRANSFER, PLENUM PRESSURE | 3 | |
| PWC38005 | TUBE LOW PRESS BLEND | 1 | |
| PWC58394 | TUBE-GUIDE, BORESCOPE, HIGH PRESSURE TURBINE | 1 | |
| PWC61733 | AGB PRESS TUBE ASSY | 1 | |
| PWC61738 | Pressure tube | 1 | |
| R50001T04 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| R50001T10 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| R50001T12 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| R50001T16 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| R50001T20 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| R80101T04 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT)（REPAIR SYSTEM） | 8 | |
| R80101T05 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT)（REPAIR SYSTEM） | 4 | |
| R81101T04 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO ARCSEAL-FEMALE)（REPAIR SYSTEM） | 1 | |
| R81101T05 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO ARCSEAL-FEMALE)（REPAIR SYSTEM） | 1 | |
| R81121T04 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO ARCSEAL-MALE)（REPAIR SYSTEM） | 1 | |
| R81121T05 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO ARCSEAL-MALE)（REPAIR SYSTEM） | 1 | |
| RA0001D16 | LOW PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| RA0001D20 | LOW PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| RB6799841 | Press Oil Turbine Power Support Tube Assembly Cleaner Brush | 1 | |
| RB6799952 | CLAMP INSTALLATION COMPRESSOR DISCHARGE AIR TUBE TO OUTER COMBUSTION CASE | 2 | |
| RB6895994 | Compressor Discharge Air Tube Pressure Test Fixture | 1 | |
| RFK9800-13 | ADAPTER - PORT CONNECTION, RING LOCKED TO FLARED TUBE END, 4000 PSI WORKING PRESSURE SYSTEM | 1 | |
| RFK9812-13 | ADAPTER - PORT CONNECTION, RING LOCKED TO FLARED TUBE END, 4000 PSI WORKING PRESSURE SYSTEM | 1 | |
| RRT115481 | Oil feed tube press tool | 1 | |
| SG 8816540000 | ARRIEL OIL PRESSURE TAPPING TUBE MODULE | 1 | |
| SK-1100-1 | PRESSURE DROP TUBE, OIL IN PORT | 1 | |
| SK-1100-2 | PRESSURE DROP TUBE, OIL OUT PORT | 1 | |
| TB9072G001 | Oil Pressure Tube | 1 | |
| lC688l | TEST SET, PRESS CHK FUEL SHROUDED MNFLD & FEEDER TUBE | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
