| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 3048A0000-01 | PRESS IN FIXTURE | 1 | |
| 3050A0000-01 | PRESS IN FIXTURE | 1 | |
| 3051A0000-01 | PRESS IN FIXTURE | 1 | |
| 55590S0000 | PRESS IN FIXTURE | 1 | |
| 55610S0000 | PRESS IN FIXTURE | 1 | |
| 56565S0000 | PRESS IN FIXTURE | 1 | |
| 56593S0000 | PRESS IN FIXTURE | 1 | |
| 56967A0000-01 | PRESS IN FIXTURE | 1 | |
| 56968A0000-01 | PRESS IN FIXTURE | 1 | |
| 57455A0000-01 | PRESS IN FIXTURE | 1 | |
| 57864A0000-01 | PRESS IN FIXTURE | 1 | |
| 58420A0000-01 | PRESS IN FIXTURE | 1 | |
| M57864A0000-01 | PRESS IN FIXTURE | 1 | |
| M58246A0000-01 | PRESS IN FIXTURE | 1 | |
| M58331A0000-01 | PRESS IN FIXTURE | 1 | |
| M58420A0000-01 | PRESS IN FIXTURE | 1 | |
| M58568A0000-01 | PRESS IN FIXTURE | 1 | |
| M58569A0000-01 | PRESS IN FIXTURE | 1 | |
| M58598A0000-01 | PRESS IN FIXTURE | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 2024488-1 | BEARING PRESS FIXTURE | 1 | |
| 0061R50003 | HINGE ASSEMBLY PIN PRESS FIXTURE | 1 | |
| 1106469 | PRESSURE SEAL INSTALLATION/ REMOVAL FIXTURE | 1 | |
| 11C4266 | FIXTURE, LIFT - CTR OF GRAVITY LOW PRESSURE TURBINE | 1 | |
| 11C4714 | FIXTURE, PRESS - INSTALLATION OUTER RETAINER, AIR ADAPTER | 1 | |
| 17312-0-201 | Bearing Press Fixture | 1 | |
| 17320-0-201 | Bearing Press Fixture | 1 | |
| 1C5634G01 | FIXTURE, LIFT - LOWER PRESSURE TURBINE STATOR, LOWER | 1 | |
| 1C5635G01 | LIFT FIXTURE - LOW PRESSURE TURBINE STATOR CASE | 1 | |
| 1C6001 | FIXTURE, HOLDING- LOW PRESSURE TURBINE ROTOR FORWA | 1 | |
| 1C6065 | FIXTURE, CONCENTRICITY CHECK-LOW PRESS TURBINE RTR | 1 | |
| 1C6065 REV J | FIXTURE, CONCENTRICITY CHECK-LOW PRESS. TURBINE ROTOR | 1 | |
| 1C6193 | FIXTURE SET, MACHINING - FRONT COMPRESSOR STATOR | 1 | |
| 1C6193 REV B | FIXTURE SET, MACHINING - FRONT COMPRESSOR STATOR | 1 | |
| 1C6868G03 | FIXTURE, DRIVE - LOW PRESSURE TURBINE ROTOR | 1 | |
| 1C6908 | FIXTURE, HOLDING - COMPRESSOR | 1 | |
| 1C6908G01 | FIXTURE, HOLDING - COMPRESSOR | 1 | |
| 1C8031G05 | Fixture, Hinge - Upper Compressor Case | 1 | |
| 1C8032G01 | Fixture, Hinge - Low Pressure Turbine Stator Case | 1 | |
| 1C8032G03 | FIXTURE, HINGE - LOW PRESSURE TURBINE STATOR CASE | 1 | |
| 1C8042G01 | FIXTURE, LIFT AND SUPPORT - LOW PRESSURE TURBINE STATOR CASE, UPPER | 1 | |
| 1C8069G02 | FIXTURE, LIFT - HIGH PRESSURE TURBINE ROTOR, HORIZONTAL | 1 | |
| 1C8069G04 | Fixture Lift - High Pressure Turbine Rotor - Horizontal | 1 | |
| 1C8217G01 | Fixture, Lift - High Pressure Turbine Nozzle Stage 1 | 1 | |
| 1C8217G02 | Fixture, Lift - High Pressure Turbine Nozzle Stage 1 | 1 | |
| 1C8322G01 | Fixture, Lift - Low Pressure Turbine Stator, Upper | 1 | |
| 1C8343G01 | Fixture Set, Top Halving - HP Compressor Stator Case | 1 | |
| 1C9400G01 | Fixture set raise and hinge upper compressor case | 1 | |
| 1R18209 | Fixture, Grinding - HP Compressor, Stage 6 Variable Stator Vanes | 1 | |
| 1X25176842 | PRESS-IN FIXTURE | 1 | |
| 2024056-1 | BEARING PRESS FIXTURE | 1 | |
| 2024056-1PM | BEARING PRESS FIXTURE | 1 | |
| 2024064-1 | bearing Press Fixture | 1 | |
| 2024065-1 | Bearing Press Fixture | 1 | |
| 2024150-1 | Bearing Press Fixture | 1 | |
| 2024246-3 | BEARING PRESS FIXTURE | 1 | |
| 2024488-1 | BEARING PRESS FIXTURE | 1 | |
| 2024658-1 | Bearing Press Fixture | 1 | |
| 2025261-1 | BEARING REMOVAL FIXTURE (REMOVES 3617585-001 COMPRESSOR BEARING FROM 3810127-1 BEARING HOUSING ASSEMBLY AND 3822055-1 COUPLING SHAFT) | 1 | |
| 2189038F1 | Pin Press Fixture | 1 | |
| 2189070F1 | Bearing Press And Stake Fixture | 1 | |
| 21C5627P01 | FIXTURE, GRIND - COMPRESSOR STATOR | 1 | |
| 21C5628P01 | FIXTURE, GAGING - COMPRESSOR STATOR | 1 | |
| 21C7090G02 | SET, COMPRESSOR STATOR MEASUREMENT FIXTURES (CONSISTING OF) | 1 | |
| 21C7092G02 | SET, COMPRESSOR STATOR LANDS/VANES GRINDING FIXTURES (CONSITING OF) | 1 | |
| 21C7206G01 | COMPRESSOR ROTOR BLADE TIPS GRINDING FIXTURE (NO ESTÁ EN EL MANUAL) | 1 | |
| 21C7206G02 | COMPRESSR ROTOR GRIND FIXTURE | 1 | |
| 21C7237G01 | GRINDING FIXTURE, COMPRESSOR DISCHARGE ROTATING SEAL | 1 | |
| 21C7729G01 | FIXTURE, STAGE 1 GAS GENERATOR ROTOR FORWARD PRESSURE FLUSHING | 1 | |
| 23058496-2 | FIXTURE – COMPRESSOR CASE, LATHE HOLDING | 1 | |
| 23278T200 | Pressing Fixture | 1 | |
| 71776 | COMPRESSOR ROTOR HOLDING FIXTURE | 1 | |
| 72107 | COMPRESSOR TURBINE GRINDING FIXTURE | 1 | |
| 278392 | BEARING PRESS FIXTURE | 1 | |
| 833180 | FIXTURE PIN PRESS | 1 | |
| 2557854 | Pressurizing Valve Cover Sizing Fixture | 1 | |
| 2566536 | Pressurizing Valve Cover Torquing Fixture | 1 | |
| 23006303 | FIXTURE PRESSURE TEST POWER TURBINE ROTOR | 2 | |
| 23033028 | FIXTURE CHECKING COMPRESSOR ROTOR TIE BOLT STRETCH | 1 | |
| 23033029 | FIXTURE ALIGNING COMPRESSOR ROTOR | 1 | |
| 23033036 | FIXTURE--SEPARATING, COMPRESSOR WHEEL | 1 | |
| 23034394 | FIXTURE--RETAINING, COMPRESSOR ROTOR BALANCE USED | 1 | |
| 23037982 | FIXTURE--HOLDING, COMPRESSOR FIRST-, SECOND-, THIRD-, AND FOURTH-STAGE VANE ASSEMBLY | 1 | |
| 23053680 | Fixture – Assembly, Wheel 2nd & 3rd Stage, Low Pressure Turbine Rotor | 1 | |
| 23055347 | FIXTURE INSPECTION FRONT COMPRESSOR SUPPORT | 1 | |
| 23058405 | Fixture – Arbor Press, Separate Damper From No. 5 Bearing | 1 | |
| 23058496 | Fixture – Compressor Case, Lathe Holding | 1 | |
| 23068488 | Fixture – Grinding, Air Seal, Rear Compressor | 1 | |
| 23068504 | Fixture – Grind, Low Pressure Turbine, 1st Stage | 1 | |
| 23068528 | Fixture – Grinding, Compressor Forward Shaft | 1 | |
| 23068529 | Fixture – Grinding, Compressor Aft Shaft | 1 | |
| 26142-AT1 | GEROTOR PIN PRESS FIXTURE | 1 | |
| 26142AT1 | GEROTOR PIN PRESS FIXTURE | 1 | |
| 272166-2 | BEARING PRESS FIXTURE | 1 | |
| 289238-1 | FIXTURE BEARING PRESS | 1 | |
| 293733-1 | HOLDING AND PRESS FIXTURE | 1 | |
| 294123-1 | COMPRESSOR WHEEL HOLDING FIXTURE | 1 | |
| 294637-1 | COMPRESSOR LOADING FIXTURE | 1 | |
| 2C14038G02 | FIXTURE, LIFT - HIGH PRESSURE TURBINE ROTOR, AFT | 1 | |
| 2C14052 | FIXTURE, LIFT & TURN - LOW PRESSURE TURBINE - HORIZ | 1 | |
| 2C14052G04 | FIXTURE, LIFT AND TURN - LOW PRESSURE TURBINE - HORIZONTAL | 4 | |
| 2C14052G05 | Fixture, Lift and Turn - Low Pressure Turbine | 3 | |
| 2C14124G02 | PRESSURIZING FIXTURE - ACCESSORY GEARBOX | 4 | |
| 2C14261G01 | FIXTURE, ALIGNMENT - HIGH PRESSURE TURBINE ROTOR IMPELLER COVER | 2 | |
| 2C14602G02 | FIXTURE, RESTRAIN - TURBINE REAR FRAME TO LOW PRESSURE TURBINE ROTOR | 2 | |
| 2C14602G03 | FIXTURE, LOCKING – LOW PRESSURE TURBINE ROTOR | 4 | |
| 2C14602G04 | FIXTURE, RESTRAIN - TURBINE REAR FRAME TO LOW PRESSURE TURBINE ROTOR | 2 | |
| 2C14661G01 | FIXTURE, INSTALLATION/REMOVAL COMPRESSOR REAR FRAME ASSEMBLY | 2 | |
| 2C14661G02 | FIXTURE, INSTALLATION/ REMOVAL COMPRESSOR REAR FRAME ASSEMBLY ( INSTALLATION/ REMOVAL FIXTURE ) | 1 | |
| 2C14672G04 | FIXTURE, LIFT - HIGH PRESSURE TURBINE ASSEMBLY FORWARD | 1 | |
| 2C14692G01 | FIXTURE SITTING, LOW PRESS TURBINE NOZ STG 2&3 | 1 | |
| 2C14696G02 | FIXTURE, ASSEMBLY - STAGE 1 HIGH PRESSURE TURBINE NOZZLE | 1 | |
| 2C14785G01 | FIXTURE, PULL - HIGH PRESSURE TURBINE ROTOR AFT AIR SEALS | 2 | |
| 2C14823G01 | FIXTURE,GRIND,HIGH PRESSURE TURBINE STAGE 2 SHROUDS | 1 | |
| 2C14858G01TK | FIXTURE INSTALL-HIGH PRESS.COMPR.BUMPER BRG. | 1 | |
| 2C6059 | FIXTURE LIFT - HIGH PRESS. TURBINE ROTOR, HORIZ. | 1 | |
| 2C6515 | FIXTURE, INSPECT-COMPRESSOR | 1 | |
| 2C6515G01 | FIXTURE, INSPECT-COMPRESSOR | 1 | |
| 2C6549 | FIXTURE, HOLDING-COMPRESSOR | 1 | |
| 2C6549G01 | FIXTURE, HOLDING-COMPRESSOR | 1 | |
| 2C6552G04 | FIXTURE GRINDING HIGH PRESSURE TURBINE SHROUNDS TOOL | 1 | |
| 2C6860G07 | FIXTURE,BUILD UP-HIGH PRESSURE TURBINE | 1 | |
| 2C6870 | FIXTURE, HOLDING STG. I LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C6870 REV A | FIXTURE, HOLDING STG. I LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C6871 | FIXTURE, HOLDING STG. 2 LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C6871 REV A | FIXTURE, HOLDING STG. 2 LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C6872 | FIXTURE, HOLDING STG. 3 LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C6872 REV A | FIXTURE, HOLDING STG. 3 LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C6873 | FIXTURE, HOLDING STG. 4 LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C6873 REV A | FIXTURE, HOLDING STG. 4 LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C687I | FIXTURE, HOLDING STG. 2 LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C7145 | FIXTURE,HOLDING-COMPRESSOR ROT | 1 | |
| 2C7145G01 | FIXTURE,HOLDING-COMPRESSOR ROT | 1 | |
| 2C8072 | FIXTURE,PRESSURIZE-HORIZONTAL DRIVE SHAFT HOUSING | 1 | |
| 2C90714G01 | T701C T701D>. FIXTURE, STAGE 2 GAS GENERATOR ROTOR FORWARD PRESSURE FLUSHING | 1 | |
| 3176-4 | BEARING ASSEMBLING PRESS-IN FIXTURE | 1 | |
| 35009-0-2000 | Bearing Press Fixture | 1 | |
| 3727380-1 | PRESS AND STAKING FIXTURE | 1 | |
| 3791068-1 | FIXTURE PIN PRESS | 1 | |
| 3A2984-1 | FIXTURE,PRESSURIZE-HORIZONTAL DRIVE SHAFT HOUSING | 3 | |
| 4-11241 | BUSHING PRESS FIXTURE | 1 | |
| 4041041-001 | FIXTURE, COMPRESSOR HOLDING | 1 | |
| 41408-T601 | PRESSING FIXTURE | 1 | |
| 42315-60-221 | SPRING COMPRESSION FIXTURE | 1 | |
| 56562A0000 | PRESS IN PRESS OUT FIXTURE | 1 | |
| 56562A0000-01 | PRESS IN OUT FIXTURE | 1 | |
| 56572T3 | PRESSING FIXTURE | 1 | |
| 56572T4 | PRESSING FIXTURE | 1 | |
| 56593S0000 | Fixture, Pressing | 1 | |
| 56699T2 | FIXTURE PRESSING | 1 | |
| 57013A0000-01 | PRESS-IN FIXTURE | 1 | |
| 57093A0000-01 | PRESS-IN FIXTURE | 1 | |
| 57996T2 | PRESSING FIXTURE | 1 | |
| 58330-0004 | Press-in Fixture | 1 | |
| 58330-0005 | Press-in Fixture | 1 | |
| 58613-T4 | Pressing Fixture (out) | 1 | |
| 58613-T5 | Pressing Fixture (in) | 1 | |
| 58613T4 | PRESSING FIXTURE | 1 | |
| 58613T5 | PRESSING FIXTURE (IN) | 1 | |
| 58749-T600 | Pressing Fixture | 1 | |
| 58749T600 | PRESSING FIXTURE | 1 | |
| 58797A0000-01 | Press-in Fixture | 1 | |
| 59548A0000-01 | PRESS-IN FIXTURE | 1 | |
| 61393-T200 | PRESSING FIXTURE | 1 | |
| 65-44761-21 | INPUT ARM PRESSING FIXTURE | 1 | |
| 65-44761-F21 | Input Arm Pressure Fixture | 1 | |
| 65-44834-F6 | Rod End Assembly Pressing Fixture | 1 | |
| 65572T1 | PRESSING FIXTURE | 2 | |
| 67587T5 | PRESSING FIXTURE | 1 | |
| 6796609 | GAGE ,SETTING,COMPRESSOR CASE BORING FIXTURE | 1 | |
| 6796667 | Holding Fixture Compressor Housing Assy Grit Blast | 2 | |
| 6796984 | INLET CASE PRESSURE TEST FIXTURE | 1 | |
| 6797670 | FIXTURE,HOLDING,COMPRESSOR ROTOR HOUSING | 1 | |
| 6798227 | FIXTURE, CHECKING, COMPRESSOR VANE ASSEMBLY | 1 | |
| 6872601 | FIXTURE - WELDING, COMPRESSOR DISCHARGEAIR TUBE | 1 | |
| 6872632 | FIXTURE - MACHINING, COMPRESSOR CASE | 1 | |
| 6872811 | FIXTURE - BURNOUT, COMPRESSOR PLASIC COATING | 1 | |
| 6872880 | FIXTURE----CHECKING, COMPRESSOR MOUNTING INSERTS (GEARBOX) | 1 | |
| 6872984 | FIXTURE - HOLDING, COMPRESSOR REAR | 1 | |
| 6873066 | FIXTURE----CHECKING, COMPRESSOR AXIS | 1 | |
| 6877012 | HOLDING FIXTURE PRESSURE TEST | 1 | |
| 6877014 | PURGE FIXTURE, AIR (CHECK VALVE REMOVAL) BACK PRESSURES FUEL NOZZLE TO BLOW CHIPS OUT OF NOZZLE DURING CHECK VALVE MACHINING OPERATION. | 1 | |
| 6877021 | SEAL FIXTURE, SECONDARY ORIFICE (WITH INLET SIMULTANEOUSLY CONNECTS METERING AND EXIT HOSE) TIP AND INLET OF FUEL NOZZLE ASSEMBLY TO PRESSURE SOURCE FOR PROOF TESTING. | 1 | |
| 6877108 | ASSEMBLY FIXTURE ASSISTS REMOVAL OF CARTRIDGE VALVE FROM FUEL NOZZLE CARTRIDGE VALVE CAVITY USING AIR PRESSURE THROUGHTIP END. | 1 | |
| 6887006 | PRESSURE TEST FIXTURE INLET COVER | 1 | |
| 6893360 | COMPRESSOR HOLDING FIXTURE | 2 | |
| 6897006 | PRESSURE TEST FIXTURE, INLET COVER | 1 | |
| 6897103 | HOLDING FIXTURE, TIP SEAL HOLDS METERING SET SEAL FIXTURES ON FUEL NOZZLE FOR PRESSURE TESTING. | 1 | |
| 6897104 | SEAL FIXTURE, PRIMARY ORIFICE PLUGS PRIMARY ORIFICE DURING PAST WELD PRESSURE TEST, NO SECONDARY PRESENT. | 1 | |
| 69020-0320 | Arbor Press Fixture for Insulation Displacement Housings, 2-28 Circuit, 24-28 AWG Wire/ Ribbon Cable | 1 | |
| 7-363300003 | GUN STOW SPRING COMPRESSOR FIXTURE | 1 | |
| 79002081-1 | PRESS AND STAKING FIXTURE | 1 | |
| 830006-809-00671 | ARBOR PRESS FIXTURE TAIL ROTOR GEARBOX HOUSING | 1 | |
| 831132-1 | Bearing Press Fixture Split Plate | 1 | |
| 833093-1 | TURBINE COMPRESSOR HOLDER FIXTURE | 1 | |
| 833102-1 | COMPRESSOR CENTERING FIXTURE | 1 | |
| 833110-12 | FIXTURE, SEAL PRESSING | 1 | |
| 833180-1 | Pin Press Fixture (2 ITEMS) | 1 | |
| 833201-1 | FIXTURE BEARING PRESSING | 1 | |
| 833202-1 | SET FIXTURE BEARING PRESSING | 1 | |
| 833311-1 | PIN PRESS FIXTURE | 1 | |
| 833437-1 | FIXTURE, BEARING PRESS | 1 | |
| 833438-2 | FIXTURE BEARING PRESS | 1 | |
| 833858-1 | Holding Press Fixture | 1 | |
| 834213-1 | Spring Compressor Fixture | 1 | |
| 834223-1 | SPRING COMPRESSION FIXTURE | 1 | |
| 834223-1PM | SPRING COMPRESSION FIXTURE | 1 | |
| 834223-2 | SPRING COMPRESSION FIXTURE | 1 | |
| 834223-2PM | SPRING COMPRESSION FIXTURE | 1 | |
| 834675-1 | COMPRESSOR ROTOR INSTALL FIXTURE | 1 | |
| 834864-1 | DRIVEN COMPRESSOR COUPLING SHAFT HOLDING FIXTURE | 1 | |
| 835689-1 | BEARING PRESS FIXTURE | 1 | |
| 835700-1 | BEARING PRESS FIXTURE | 1 | |
| 835701-1 | BEARING PRESS FIXTURE | 1 | |
| 835703-1 | BEARING PRESS FIXTURE | 1 | |
| 835869-1 | Bearing Press Fixture | 1 | |
| 856A1056 G05 | Fixture, Grind - Compressor Stator Flowpath | 8 | |
| 856A1056G03 | FIXTURE, GRIND - COMPRESSOR STATOR FLOW PATH (GRIND FIXTURE) | 1 | |
| 856A1056G04 | FIXTURE, GRIND - COMPRESSOR STATOR FLOWPATH | 5 | |
| 856A1056G05 | FIXTURE, GRIND - COMPRESSOR STATOR FLOWPATH | 8 | |
| 856A1062G01 | FIXTURE CHILL（TO PROVIDE FOR CHILLING OF THE HIGH PRESSURE TURBINE FORWARD SHAFT.） | 1 | |
| 856A1074 | FIXTURE, LIFT AND TURN HIGH PRESSURE TURBINE ROTOR DISK, AFT | 1 | |
| 856A1074G02 | FIXTURE, LIFT AND TURN HIGH PRESSURE TURBINE ROTOR DISK, AFT | 4 | |
| 856A1074G03 | FIXTURE, LIFT AND TURN HIGH PRESSURE TURBINE ROTOR DISK, AFT | 1 | |
| 856A1075 | FIXTURE, LIFT AND TURN HIGH PRESSURE TURBINE ROTOR DISK, AFT | 1 | |
| 856A1075G03 | FIXTURE, LIFT AND TURN HIGH PRESSURE TURBINE ROTOR DISK, AFT | 6 | |
| 856A1171G05 | FIXTURE, PRESSURE TEST - SEAL, STATIONARY, NO. 3 BEARING AFT (PRESSURE TEST FIXTURE) | 1 | |
| 856A1171G06 | FIXTURE, PRESSURE TEST - SEAL, STATIONARY, NO. 3 BEARING AFT (PRESSURE TEST FIXTURE) | 2 | |
| 856A1299G02 | FIXTURE, BLADE REMOVAL - HIGH PRESSURE TURBINE ROTOR (BLADE REMOVAL FIXTURE) | 2 | |
| 856A1334G01 | FIXTURE, BUILDUP - CORE ENGINE/HP COMPRESSOR ROTOR (BUILDUP FIXTURE) | 1 | |
| 856A1334G02 | FIXTURE, BUILDUP - CORE ENGINE/HP COMPRESSOR ROTOR (BUILDUP FIXTURE) | 1 | |
| 856A1334G03 | Fixture, Buildup - Core Engine/HP Compressor Rotor (buildup fixture) | 9 | |
| 856A1334G04 | FIXTURE, BUILDUP - CORE ENGINE/HP COMPRESSOR ROTOR (BUILDUP FIXTURE) | 4 | |
| 856A1344G02 | Fixture, Setup - Core Engine/HP Compressor Rotor Buildup | 7 | |
| 856A1411G04 | FIXTURE RING COMPRESSION HPT | 4 | |
| 856A1431G03 | FIIXTURE, RESTRAINING-HPT NOZZLE ASSEMB(THE RESTRAIN FIXTURE IS USED TO RESTRAIN THE NOZZLE SEGMENTS OF THE HP TURBINE NOZZLE ASSEMBLY CIRCUMFERENTIALLY DURING THE INSTALLATION OR REMOVAL FROM THE COMPRESSOR REAR FRAME (CRF) | 7 | |
| 856A1442G02 | FIXTURE, CHILL - HIGH PRESSURE TURBINE ROTOR AFT BLADE RETAINER | 1 | |
| 856A1475G03 | FIXTURE, DUMMY - HIGH PRESSURE TURBINE STATOR FORWARD (DUMMY FIXTURE) | 3 | |
| 856A1802G03 | FIXTURE, DUMMY - HIGH PRESSURE TURBINE STATOR FORWARD (DUMMY FIXTURE) | 1 | |
| 856A1839 | FIXTURE, DISASSEMBLY - HIGH PRESSURE TURBINE ROTOR/HIGH PRESSURE COMPRESSOR ROTOR (FIXTURE) | 1 | |
| 856A1839G01 | FIXTURE, DISASSEMBLY - HIGH PRESSURE TURBINE ROTOR/HIGH PRESSURE COMPRESSOR ROTOR | 8 | |
| 856A1845 | FIXTURE, ALIGNING - HIGH PRESSURE COMPRESSOR | 1 | |
| 856A1845G01 | FIXTURE, ALIGNING HIGH PRESSURE | 3 | |
| 856A1845G01 | FIXTURE, ALIGNING HIGH PRESSURE COMPRESSOR | 3 | |
| 856A1845G02 | FIXTURE, ALIGNING-HIGH PRESSURE COMPRESSOR | 3 | |
| 856A1845G03 | Fixture, Aligning - High Pressure Compressor | 5 | |
| 856A2341G03 | FIXTURE, PULLER/PRESS - NO. 2 ROLLER BEARING OUTER RACE | 1 | |
| 856A2710G05 | LOW PRESSURE TURBINE MAJOR MODULE HANDLING FIXTURE | 7 | |
| 856A2713G07 | LOW PRESSURE TURBINE SHAFT TO LOW PRESSURE TURBINE MODULE BUILDUP FIXTURE | 8 | |
| 856A2714 | LOW PRESSURE TURBINE MODULE HOIST FIXTURE | 1 | |
| 856A2758G02 | LOW PRESSURE TURBINE SHAFT TO LOW PRESSURE TURBINE CENTERING FIXTURE | 6 | |
| 856A3488G01 | LOW PRESSURE TURBINE SHAFT SUPPORT HOLDING FIXTURE | 4 | |
| 856A3504 | LOW PRESSURE TURBINE MODULE PUSH/PULL FIXTURE | 1 | |
| 856A3750G02 | LOW PRESSURE TURBINE SHAFT MODULE CENTERING FIXTURE | 13 | |
| 856A3790G01 | LOW PRESSURE TURBINE REAR VENT TUBE FIXTURE | 7 | |
| 856A3793 | LOW PRESSURE TURBINE CENTER VENT TUBE FIXTURE | 3 | |
| 856A3918 | FIXTURE, PULLER / PRESS NO 2 ROLLER BEARING OUTER RACE | 1 | |
| 856A3918G01 | FIXTURE, PULLER / PRESS NO 2 ROLLER BEARING OUTER RACE | 1 | |
| 856A3918G02 | FIXTURE, PULLER / PRESS NO 2 ROLLER BEARING OUTER RACE | 2 | |
| 856A3918G03 | Fixture, Puller/Press - No. 2 Roller Bearing Outer Race (puller/press fixture) | 4 | |
| 856A4028G02 | FIXTURE MACHINING COMPRESSOR ROTOR AIR DUCT | 1 | |
| 856A4044G01 | FIXTURE MACHINING COMPRESSOR ROTOR SPOOL, STAGE4 THRU STAGE 9 | 1 | |
| 856A4046G02 | FIXTURE MACHINING COMPRESSOR ROTOR SHAFT | 1 | |
| 856A5809 | INFLATABLE PRESSURE FIXTURE - FAN FRAME ABRADABLE LINER | 1 | |
| 856A5944 | LOW PRESSURE TURBINE SHAFT ALIGNMENT FIXTURE | 1 | |
| 856A6623 | INFLATABLE PRESSURE FIXTURE - FAN FRAME ABRADABLE LINER | 1 | |
| 8943-0-2000 | Bearing Press Fixture | 1 | |
| 8955-0-2000 | Bearing Press Fixture | 1 | |
| 8C2188 | FIXTURE, LIFT - COMPRESSOR STATOR RINGS | 1 | |
| 8C2189 | FIXTURE, SUPPORT - AFT COMPRESSOR INNER STATOR ASSEMBLY | 1 | |
| 8C2405 | FIXTURE, PUSH/PULL-LOW PRESSURE TURBINE MODULE & FAN MODULE | 1 | |
| 8C2720 | FIXTURE,RESTRAIN - COMPRESSOR ROTOR, AFT (SERVICE SHOP TOOL ONLY) | 1 | |
| 8C3191 | FIXTURE - RESTRAINING - LOW PRESSURE TURBINE CASE | 1 | |
| 905696-1-1 | FIXTURE ALIGNMENT AND PRESSING | 1 | |
| 907876-1-1 | BUSHING AND STATOR PRESSING FIXTURE | 1 | |
| 956A3173G02 | VARIABLE STATOR VANE HIGH PRESSURE COMPRESSOR (HPC) TURNBUCKLE GAUGING FIXTURE | 1 | |
| 956A6860 | FIXTURE - LIFTING- VANE LOW PRESSURE COMPRESSOR | 1 | |
| 956A6866 | FIXTURE - LIFTING - SPOOL LOW PRESSURE COMPRESSOR | 1 | |
| 956A6866G01 | Fixture, lifting - Spool Low Pressure Compressor | 1 | |
| 956A6878 | FIXTURE - BALANCING - LOW PRESSURE COMPRESSOR | 1 | |
| 956A8858 | FIXTURE - LIFTING- VANE LOW PRESSURE COMPRESSOR | 1 | |
| 956A8860 | FIXTURE - LIFTING - SPOOL LOW PRESSURE COMPRESSOR | 1 | |
| 956A8869 | FIXTURE - BALANCING - LOW PRESSURE COMPRESSOR | 1 | |
| 9C3165 | FIXTURE, TORQUE REACTION - LOW PRESSURE TURBINE SHAFT TO ELECTRONIC NUTRUNNER | 1 | |
| A28004-1 | CHECK FIXTURE EQUIPMENT, PRESSURE RELIEF VALVE VACUUM SOURCE, 0 TO -5.0 PSIG SOURCE - PRESSURE (CAPABLE OF SUPPLYING 1.5 PSIG) | 4 | |
| AA292579 | SPRING COMPRESSOR TOOL NO. AA292579 FOUR (4) REPLACEMENT HOSES FOR CYLINDER HEAD HYDRAULIC MOUNTING FIXTURE AA293268 | 1 | |
| AGE10260 | COMPRESSOR FIXTURE, VALVE SPRING | 1 | |
| AGE12854/AGE13154 | DIFFERENTIAL PRESSURE INDICATOR TEST FIXTURE | 1 | |
| AGE15187 | PRESSURE DROP HOLDING FIXTURE | 1 | |
| AGE16551 | FIXTURE, SPRING COMPRESSION | 1 | |
| AT-3346 | FIXTURE PRESSING | 1 | |
| AT1 1 1 9 | BEARING PRESSING FIXTURE, | 1 | |
| AT3294 | FIXTURE, BEARING PRESSING, APU | 1 | |
| AT5426 | PIN PRESSING FIXTURE, | 1 | |
| C47884 | COMPRESSING FIXTURE | 1 | |
| C47888 | COMPRESSING FIXTURE | 1 | |
| C52001-1 | Holding Fixture - Compressed Spring Cartridge | 4 | |
| C52004 | HOLDING FIXTURE - COMPRESSED SPRING CARTRIDGE | 1 | |
| C52004-1 | HOLDING FIXTURE - COMPRESSED SPRING CARTRIDGE | 11 | |
| CF65B40907 | CHECK FIXTURE - PRESSURE RELIEF VALVE ASSEMBLY, AIR CONDITIONING | 1 | |
| CPWA-30452 | Fixture – Aligning, Compressor Rotor Assembly | 1 | |
| D46036 | COMPRESSING FIXTURE | 1 | |
| D46110 | Compression Fixture For Spring | 4 | |
| Ex-74971 | Fixture, holding, compressor vane assy | 1 | |
| Ex-74972 | Fixture, holding, compressor vane assy | 1 | |
| F11343 | PRESSING FIXTURE | 1 | |
| F80166-1 | FIXTURE, TEST - PRESSURE RELIEF, FLAME ARRESTOR SURGE TANK (REQUIRED IF FLAME ARRESTOR IS INSTALLED) (THE BOEING COMPANY) | 26 | |
| FXT-03438 | Spring Compression Fixture | 1 | |
| FXT-03934 | BEARING PRESS FIXTURE | 1 | |
| FXT-04335 | HOLDING COMPRESSION FIXTURE | 1 | |
| FXT03934 | BEARING PRESS FIXTURE | 1 | |
| G28005-14 | CHECK FIXTURE EQUIPMENT, PRESSURE RELIEF VALVE VACUUM SOURCE, 0 TO -5.0 PSIG SOURCE - PRESSURE (CAPABLE OF SUPPLYING 1.5 PSIG) | 4 | |
| G28005-18 | CHECK FIXTURE EQUIPMENT, PRESSURE RELIEF VALVE VACUUM SOURCE, 0 TO -5.0 PSIG SOURCE - PRESSURE (CAPABLE OF SUPPLYING 1.5 PSIG) | 2 | |
| G28005-35 | CHECK FIXTURE EQUIPMENT, PRESSURE RELIEF VALVE VACUUM SOURCE, 0 TO -5.0 PSIG SOURCE - PRESSURE (CAPABLE OF SUPPLYING 1.5 PSIG) | 17 | |
| GS13050-1 | FIXTURE, SEAL COMPRESSING | 1 | |
| GS13450 | FIXTURE COMPRESSION IN | 1 | |
| GS13797-1 | Compressor Housing Fixture | 2 | |
| GS15768-1 | FIXTURE – 0 RING COMPRESSOR | 1 | |
| GS20382-1 | FIXTURE, BEARING PRESS | 1 | |
| GS22330-1 | Compressor End Holding Fixture | 2 | |
| GS24091-1 | HOLDING FIXTURE, PRESSURE TEST | 1 | |
| HS7672 | PRESSURIZING AND REGULATING VALVE TEST FIXTURE | 2 | |
| HS9486 | PRESSURIZING AND REGULATING VALVE FIXTURE | 1 | |
| HS9512 | FIXTURE - SPRING COMPRESSING | 2 | |
| HTE29671 | PRESSURE TEST FIXTURE FOR CONDUCTING TEST ON GUIDE TUBE ASSY (P/N CH1543A0011) | 1 | |
| IAE1R18209 | FIXTURE, GRINDING - HP COMPRESSOR, STAGE 6 VARIABLE STATOR VANES | 1 | |
| K32044-1 | TEST SUPPORT FIXTURE, TIRE PRESSURE SENSOR (TPS) INSTALLATION | 4 | |
| LTCT14736-02 | Fixture Assembly, Compressor Rotor Checking | 1 | |
| LTCT2048 | COMPRESSOR PINION GEAR HOLDING FIXTURE | 1 | |
| LTCT3880 | Fixture, Centering, Compressor Rotor | 2 | |
| LTCT5455 | Fixture-Centering Compressor Rotor | 1 | |
| LTCT6641 | Holding Fixture (Compressor Rotor) | 1 | |
| LTCT7217 | Fixture, Pressure Test Bearing Support Assy. | 1 | |
| LTCT7493-01 | Fixture, Test, Pressure, No. 4/5 Bearing | 1 | |
| LTCT7508-01 | Fixture, No. 2 Bearing Package Pressure Check | 1 | |
| M56954A0000-01 | LEE PRESS IN FIXTURE | 1 | |
| PR 135 | BEARING ASSEMBLING PRESS-IN FIXTURE | 1 | |
| PR135 | BEARING ASSEMBLING PRESS-IN FIXTURE | 1 | |
| PS10352 | BEARING PRESS FIXTURE | 1 | |
| PS10518 | BEARING PRESS FIXTURE | 1 | |
| PWA 12812 | Fixture Compr.rear bearing seal air pressure tube | 1 | |
| PWA102120 | INTERMEDIATE PRESSURE TUBE REMOVAL FIXTURE | 1 | |
| PWC30420 | HOLDING FIXTURE, COMPRESSOR ROTOR ASSEMBLY | 1 | |
| PWC37351 | FIXTURE, ALIGNING HIGH PRESSURE DISK AND COVERS | 6 | |
| PWC38101 | FIXTURE, HOLDING, LOW PRESSURE VANE RING SEAL MACHINING | 2 | |
| PWC38428 | FIXTURE, HIGH PRESSURE TURBINE BLADES GRINDING | 1 | |
| PWC64605 | MAIN OIL PRESSURE ADJUSTMENT FIXTURE | 3 | |
| PWC64658 | Locating Fixture Compressor Turbine Disc | 1 | |
| PWC71776 | Fixture Holding Compressor | 3 | |
| PWC72107 | COMPRESSOR TURBINE GRINDING FIXTURE | 3 | |
| PWC72898 | LIFTING FIXTURE COMPRESSOR | 1 | |
| RB0006-809-00671 | Arbor Press Fixture Tail Rotor Gearbox Housing | 1 | |
| RB23006302 | Fixture, Pressure Test, Power Turbine Rotor | 2 | |
| RB23006303 | Fixture, Pressure.Test, Power Turbine Rotor | 1 | |
| RB23033028 | Fixture-Checking-Compressor Rotor Tie Bolt Stretch | 1 | |
| RB23033029 | FIXTURE----ALIGNING, COMPRESSOR ROTOR | 1 | |
| RB23033036 | Fixture-Separating Compressor Rotor | 1 | |
| RB23034394 | Fixture-Retaining Compressor Rotor Balance | 1 | |
| RB23055347 | Fixture-Inspection Frt. Compressor Support Assembly | 2 | |
| RB6872534 | Aligning Compressor Rotor Fixture | 2 | |
| RB6872880 | Compressor Mounting Inserts Checking Fixture | 2 | |
| RB6873066 | FIXTURE----CHECKING, COMPRESSOR AXIS | 2 | |
| SC14052G04 | FIXTURE, LIFT AND TURN - LOW PRESSURE TURBINE - HORIZONTAL | 1 | |
| SCF2-8189 | FIXTURE-COMPRESSION,SPRING | 1 | |
| SK13389 | MACHINING FIXTURE SHROUD COMPRESSOR APU | 1 | |
| T 25758 | Fixture, Pressurizing Valve leakage Test | 1 | |
| T-25758 | FIXTURE, TEST PRESSURIZING VALVE LEAKAGE | 1 | |
| T-412380 | SPRING COMPRESSOR FIXTURE | 1 | |
| T-66881 | Test Fixture, Housing Negative Pressure Test | 1 | |
| T-66999 | Test Fixture, Housing Positive Pressure Test | 1 | |
| T25758 | Fixture, Test pressurizing Valve Leakage | 1 | |
| T27257 | FIXTURE - DEPRESSING | 1 | |
| T42315-60SC1 | SPRING COMPRESSION FIXTURE | 1 | |
| T42315-72SC1-101 | SPRING COMPRESSOR, SHEAVE CROWDER, 1 EA • T42315-60SC1, SPRING COMPRESSION FIXTURE, 1 EA | 1 | |
| T69588 | PIN PRESSING FIXTURE, P | 1 | |
| T743806 | BEARING PRESS FIXTURE | 1 | |
| TSJ65B91267 | TEST FIXTURE - ENGINE PRESSURE RATIO (EPR) SYSTEM Pt2 PROBE | 1 | |
| VR-L11-0010 | PRESSING FIXTURE | 1 | |
| lC600l | FIXTURE, HOLDING- LOW PRESSURE TURBINE ROTOR FORWA | 1 | |
| lC6065 | FIXTURE, CONCENTRICITY CHECK-LOW PRESS. TURBINE ROTOR | 1 | |
| lC6l93 | FIXTURE SET, MACHINING - FRONT COMPRESSOR STATOR | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
