| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 2024920-1 | Press Fixture | 1 | |
| 2024925-1 | Press Fixture | 1 | |
| 2184104F1 | Press Fixture | 1 | |
| 26398-AT1 | PRESS FIXTURE | 1 | |
| 26398AT1 | PRESS FIXTURE | 1 | |
| 287156-1-1 | Press Fixture | 1 | |
| 293439-1 | Press Fixture | 1 | |
| 3059-0001 | PRESS FIXTURE | 1 | |
| 3059A0000-01 | PRESS FIXTURE | 1 | |
| 58569A0000-01 | PRESS FIXTURE | 1 | |
| 833212-1 | PRESS FIXTURE | 1 | |
| 833311-1 | Press Fixture | 1 | |
| 835087-1 | Press Fixture | 1 | |
| AT5276 | PRESS FIXTURE | 1 | |
| FXT-10514 | PRESS FIXTURE | 1 | |
| TB3080G001 | Press Fixture | 1 | |
| TB3087G001 | Press Fixture | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 2024488-1 | BEARING PRESS FIXTURE | 1 | |
| 0061R50003 | HINGE ASSEMBLY PIN PRESS FIXTURE | 1 | |
| 100-47813 | GEAR LOCK FIXTURE, PRESSURE TEST | 1 | |
| 10C1014G01 | FIXTURE, LIFT/TURN COMPRESSOR ROTOR , AFT END AND HPT ROTOR, FWD END | 1 | |
| 10C1072G01 | FIXTURE, DISASSEMBLY - HPT ROTOR/COMPRESSOR ROTOR (DISASSEMBLY FIXTURE) (SUPERSEDED BY 10C1072G02) | 1 | |
| 10C1072G02 | FIXTURE, DISASSEMBLY - HPT ROTOR/COMPRESSOR ROTOR (DISASSEMBLY FIXTURE) (SUPERSEDES 10C1072G01) | 1 | |
| 10C1077G01 | FIXTURE, LIFT – COMPRESSOR STATOR CASE, FRONT ASSEMBLY (CF34) | 1 | |
| 10C1221P02 | FIXTURE, NUT RUNNER - COMPRESSOR ROTOR AFT FLANGE (NUT RUNNER FIXTURE) | 1 | |
| 1106469 | PRESSURE SEAL INSTALLATION/ REMOVAL FIXTURE | 1 | |
| 1106569-2 | Pressure Seal Remover Fixture | 1 | |
| 114-212-1 | Pressure Plate Assembly Fixture | 1 | |
| 114-212-2 | Pressure Plate Assembly Fixture | 1 | |
| 114-212-3 | Pressure Plate Assembly Fixture | 1 | |
| 11C3133 | FIXTURE - LOCK-HP COMPRESSOR ROTOR | 1 | |
| 11C3416 | FIXTURE - NUT STARTER-SUPPORT TUBE - HP COMPRESSOR ROTOR | 1 | |
| 11C3479 | FIXTURE - PRESSURE | 1 | |
| 11C4266 | FIXTURE, LIFT - CTR OF GRAVITY LOW PRESSURE TURBINE | 1 | |
| 11C4714 | FIXTURE, PRESS - INSTALLATION OUTER RETAINER, AIR ADAPTER | 1 | |
| 11C4716 | FIXTURE, PRESS | 1 | |
| 11C4729 | FIXTURE, PRESS - SEAL | 1 | |
| 17312-0-201 | Bearing Press Fixture | 1 | |
| 17320-0-201 | Bearing Press Fixture | 1 | |
| 1C5634G01 | FIXTURE, LIFT - LOWER PRESSURE TURBINE STATOR, LOWER | 1 | |
| 1C5635G01 | LIFT FIXTURE - LOW PRESSURE TURBINE STATOR CASE | 1 | |
| 1C5976 | FIXTURE, LIFT-COMPRESSOR | 1 | |
| 1C5976G01 | FIXTURE, LIFT-COMPRESSOR | 1 | |
| 1C5976G02 | FIXTURE LIFT - VERTICAL COMPRESSOR STATOR HALF | 1 | |
| 1C6001 | FIXTURE, HOLDING- LOW PRESSURE TURBINE ROTOR FORWA | 1 | |
| 1C6065 | FIXTURE, CONCENTRICITY CHECK-LOW PRESS TURBINE RTR | 1 | |
| 1C6065 REV J | FIXTURE, CONCENTRICITY CHECK-LOW PRESS. TURBINE ROTOR | 1 | |
| 1C6193 | FIXTURE SET, MACHINING - FRONT COMPRESSOR STATOR | 1 | |
| 1C6193 REV B | FIXTURE SET, MACHINING - FRONT COMPRESSOR STATOR | 1 | |
| 1C6296 | FIXTURE, WELD AFT PRESSURE BAL | 1 | |
| 1C6296G01 | FIXTURE, WELD AFT PRESSURE BAL | 1 | |
| 1C6868G03 | FIXTURE, DRIVE - LOW PRESSURE TURBINE ROTOR | 1 | |
| 1C6895 | FIXTURE,DROP CHECK-COMPRESS | 1 | |
| 1C6895G01 | FIXTURE,DROP CHECK-COMPRESS | 1 | |
| 1C6908 | FIXTURE, HOLDING - COMPRESSOR | 1 | |
| 1C6908G01 | FIXTURE, HOLDING - COMPRESSOR | 1 | |
| 1C8000G01 | FIXTURE SPREADER, COMPRESSOR ROTOR BLADES STAGE 1 | 1 | |
| 1C8031G05 | Fixture, Hinge - Upper Compressor Case | 1 | |
| 1C8032G01 | Fixture, Hinge - Low Pressure Turbine Stator Case | 1 | |
| 1C8032G03 | FIXTURE, HINGE - LOW PRESSURE TURBINE STATOR CASE | 1 | |
| 1C8039 | FIXTURE, RAISE & SUPPORT- UPPER COMPRESSOR CASE | 1 | |
| 1C8039G02 | Fixture, Raise and Support - Upper Compressor Case | 1 | |
| 1C8039G03 | FIXTURE, RAISE AND SUPPORT - UPPER COMPRESSOR CASE | 1 | |
| 1C8042G01 | FIXTURE, LIFT AND SUPPORT - LOW PRESSURE TURBINE STATOR CASE, UPPER | 1 | |
| 1C8069G02 | FIXTURE, LIFT - HIGH PRESSURE TURBINE ROTOR, HORIZONTAL | 1 | |
| 1C8069G04 | Fixture Lift - High Pressure Turbine Rotor - Horizontal | 1 | |
| 1C8217G01 | Fixture, Lift - High Pressure Turbine Nozzle Stage 1 | 1 | |
| 1C8217G02 | Fixture, Lift - High Pressure Turbine Nozzle Stage 1 | 1 | |
| 1C8300G01 | FIXTURE, SUPPORT-HP COMPRESSOR STAGE 0 | 1 | |
| 1C8322G01 | Fixture, Lift - Low Pressure Turbine Stator, Upper | 1 | |
| 1C8343G01 | Fixture Set, Top Halving - HP Compressor Stator Case | 1 | |
| 1C8350 | FIXTURE, LIFT- COMPRESSOR STATOR CASE, UPPER | 1 | |
| 1C9400G01 | Fixture set raise and hinge upper compressor case | 1 | |
| 1R18209 | Fixture, Grinding - HP Compressor, Stage 6 Variable Stator Vanes | 1 | |
| 1X25176842 | PRESS-IN FIXTURE | 1 | |
| 2000134 | PROOF PRESSURE FIXTURE | 1 | |
| 2024056-1 | BEARING PRESS FIXTURE | 1 | |
| 2024056-1PM | BEARING PRESS FIXTURE | 1 | |
| 2024064-1 | bearing Press Fixture | 1 | |
| 2024065-1 | Bearing Press Fixture | 1 | |
| 2024067 | Fixture-Press Seal And Shim | 1 | |
| 2024067-1 | Seal Press Fixture | 1 | |
| 2024150-1 | Bearing Press Fixture | 1 | |
| 2024151-1 | SEAL PRESS FIXTURE | 1 | |
| 2024225-1 | PRESSURE TEST FIXTURE | 1 | |
| 2024246-3 | BEARING PRESS FIXTURE | 1 | |
| 2024370-1 | Seal Press Fixture | 1 | |
| 2024488-1 | BEARING PRESS FIXTURE | 1 | |
| 2024658-1 | Bearing Press Fixture | 1 | |
| 2024822-1 | FIXTURE, TEST, PRESSURE SENSOR | 1 | |
| 2025064-1 | FIXTURE, TEST, PRESSURE SENSOR | 1 | |
| 2025261-1 | BEARING REMOVAL FIXTURE (REMOVES 3617585-001 COMPRESSOR BEARING FROM 3810127-1 BEARING HOUSING ASSEMBLY AND 3822055-1 COUPLING SHAFT) | 1 | |
| 2189038F1 | Pin Press Fixture | 1 | |
| 2189070F1 | Bearing Press And Stake Fixture | 1 | |
| 21C5627P01 | FIXTURE, GRIND - COMPRESSOR STATOR | 1 | |
| 21C5628P01 | FIXTURE, GAGING - COMPRESSOR STATOR | 1 | |
| 21C7090G02 | SET, COMPRESSOR STATOR MEASUREMENT FIXTURES (CONSISTING OF) | 1 | |
| 21C7092G02 | SET, COMPRESSOR STATOR LANDS/VANES GRINDING FIXTURES (CONSITING OF) | 1 | |
| 21C7098G02 | COMPRESSOR ROTOR MEASUREMENT FIXTURES SET | 1 | |
| 21C7110G01 | FIXTURE, PRESSURE CHECK | 1 | |
| 21C7114G02 | FIXTURE, COMPRESSOR | 1 | |
| 21C7206G01 | COMPRESSOR ROTOR BLADE TIPS GRINDING FIXTURE (NO ESTÁ EN EL MANUAL) | 1 | |
| 21C7206G02 | COMPRESSR ROTOR GRIND FIXTURE | 1 | |
| 21C7219G01 | FIXTURE, MEASUREMENT COMPRESSOR ROTOR | 1 | |
| 21C7237G01 | GRINDING FIXTURE, COMPRESSOR DISCHARGE ROTATING SEAL | 1 | |
| 21C7729G01 | FIXTURE, STAGE 1 GAS GENERATOR ROTOR FORWARD PRESSURE FLUSHING | 1 | |
| 21C7731G02 | FWD PRESSURE, FLUSH FIXTURE, STAGE 1 NOZZLE | 1 | |
| 23058496-2 | FIXTURE – COMPRESSOR CASE, LATHE HOLDING | 1 | |
| 23278T200 | Pressing Fixture | 1 | |
| 247C5189 | FIXTURE, LIFT & TURN-HP COMPRESSOR UPPER CASE HALF | 1 | |
| 278392 | BEARING PRESS FIXTURE | 1 | |
| 2557854 | Pressurizing Valve Cover Sizing Fixture | 1 | |
| 2561581 | Press Valve Test Fixture | 1 | |
| 2566536 | Pressurizing Valve Cover Torquing Fixture | 1 | |
| 23002210 | COMPRESSOR ROTOR BALANCE CORRECTION FIXTURE | 2 | |
| 23006303 | FIXTURE PRESSURE TEST POWER TURBINE ROTOR | 2 | |
| 23033026 | NUT CLAMP COMPRESSOR ROTOR ASSEMBLY FIXTURE | 2 | |
| 23033028 | FIXTURE CHECKING COMPRESSOR ROTOR TIE BOLT STRETCH | 1 | |
| 23033029 | FIXTURE ALIGNING COMPRESSOR ROTOR | 1 | |
| 23033036 | FIXTURE--SEPARATING, COMPRESSOR WHEEL | 1 | |
| 23033040 | ADAPTER--PRESSURE CHECK FIXTURE, | 1 | |
| 23034393 | FIXTURE--ALIGNMENT, COMPRESSOR SHROUD US | 1 | |
| 23034394 | FIXTURE--RETAINING, COMPRESSOR ROTOR BALANCE USED | 1 | |
| 23037978 | FIXTURE BLAST, COMPRESSOR FOURTH-STAGE VANE AND BAND ASSEMBLY | 1 | |
| 23037982 | FIXTURE--HOLDING, COMPRESSOR FIRST-, SECOND-, THIRD-, AND FOURTH-STAGE VANE ASSEMBLY | 1 | |
| 23037983 | FIXTURE--BLAST, COMPRESSOR FIRST-STAGE VANE AND BAND ASSEMBLY | 1 | |
| 23037984 | FIXTURE--BLAST, COMPRESSOR SECOND-STAGE VANE AND BAND ASSEMBLY | 1 | |
| 23037985 | FIXTURE--BLAST, COMPRESSOR THIRD-STAGE VANE AND BAND ASSEMBLY | 1 | |
| 23037987 | FIXTURE--SPRAY, COMPRESSOR CASE | 1 | |
| 23051156 | FIXTURE – CONCENTRICITY, COMPRESSOR ROTOR - SUPERSEDES 6897434 | 2 | |
| 23053680 | Fixture – Assembly, Wheel 2nd & 3rd Stage, Low Pressure Turbine Rotor | 1 | |
| 23055347 | FIXTURE INSPECTION FRONT COMPRESSOR SUPPORT | 1 | |
| 23058405 | Fixture – Arbor Press, Separate Damper From No. 5 Bearing | 1 | |
| 23058454 | Fixture – Turntable, Compressor Case Assembly | 1 | |
| 23058496 | Fixture – Compressor Case, Lathe Holding | 1 | |
| 23060722 | Fixture – Spray, Compressor Vane Stages 6-13 | 1 | |
| 23063510 | Fixture – Balance, Compressor Wheel Assembly | 1 | |
| 23068488 | Fixture – Grinding, Air Seal, Rear Compressor | 1 | |
| 23068504 | Fixture – Grind, Low Pressure Turbine, 1st Stage | 1 | |
| 23068528 | Fixture – Grinding, Compressor Forward Shaft | 1 | |
| 23068529 | Fixture – Grinding, Compressor Aft Shaft | 1 | |
| 23068599 | Fixture – Remove & Replace Compressor Cone Shaft Studs | 1 | |
| 26142-AT1 | GEROTOR PIN PRESS FIXTURE | 1 | |
| 26142AT1 | GEROTOR PIN PRESS FIXTURE | 1 | |
| 26398-AT1 | PRESS FIXTURE ASSEMBLY | 1 | |
| 272166-2 | BEARING PRESS FIXTURE | 1 | |
| 289238-1 | FIXTURE BEARING PRESS | 1 | |
| 290083-187 | PRESSURE LUBRICATION FIXTURE | 1 | |
| 291864-1 | PRESSURE TEST FIXTURE | 1 | |
| 291865-1 | PRESSURE TEST FIXTURE | 1 | |
| 293733-1 | HOLDING AND PRESS FIXTURE | 1 | |
| 294123-1 | COMPRESSOR WHEEL HOLDING FIXTURE | 1 | |
| 294637-1 | COMPRESSOR LOADING FIXTURE | 1 | |
| 296323-1 | Shaft Roller Press Fixture | 1 | |
| 296328-1/-2 | Reducer Tube Press Fixture | 1 | |
| 296559-1 | FLANGE PRESS FIXTURE | 1 | |
| 296822 | FIXTURE ASSY, PRESSURE TEST-ANTI ICE | 1 | |
| 296957-1 | TEST FIXTURE FUEL PRESSURE | 1 | |
| 296958-1 | TEST FIXTURE FUEL PRESSURE RELIEF VALVE | 1 | |
| 2C 14699G02 | FIXTURE, LIFT-COMPRESSOR STATOR VANE SPACER | 1 | |
| 2C14014G01 | FIXTURE, LIFT AND TURN - COMPRESSOR ROTOR AFT | 2 | |
| 2C14038 | FIXTURE, LIFT-HIGH PRESS. TURB. ROTOR, AFT | 1 | |
| 2C14038 REV D | FIXTURE, LIFT-HIGH PRESS. TURB. ROTOR, AFT | 1 | |
| 2C14038G02 | FIXTURE, LIFT - HIGH PRESSURE TURBINE ROTOR, AFT | 1 | |
| 2C14052 | FIXTURE, LIFT & TURN- LOW PRESS. TURB. HORIZ. | 1 | |
| 2C14052 REV P | FIXTURE, LIFT & TURN- LOW PRESS. TURB. HORIZ. | 1 | |
| 2C14052G04 | FIXTURE, LIFT AND TURN - LOW PRESSURE TURBINE - HORIZONTAL | 4 | |
| 2C14052G05 | Fixture, Lift and Turn - Low Pressure Turbine | 3 | |
| 2C14124 | FIXTURE,SEAL-PRESSURIZE AGB | 1 | |
| 2C14124 REV D | FIXTURE, SEAL/PRESSURIZE ACCESS. GEARBOX | 1 | |
| 2C14124G02 | G/BOX SEAL PRESS. TEST FIXTURE | 4 | |
| 2C14126G01 | FIXTURE, LIFT COMPRESSOR | 1 | |
| 2C14239 | FIXTURE, RUNOUT - HIGH PRESS. TURB. RTR AFT FLANGE | 1 | |
| 2C14239 REV G | FIXTURE, RUNOUT - HIGH PRESS. TURB. RTR AFT FLANGE | 1 | |
| 2C14261G01 | FIXTURE, ALIGNMENT - HIGH PRESSURE TURBINE ROTOR IMPELLER COVER | 2 | |
| 2C14288G01 | FIXTURE LIFTTURN COMPRESSOR ROTOR SPOOL | 1 | |
| 2C14602G02 | FIXTURE, RESTRAIN - TURBINE REAR FRAME TO LOW PRESSURE TURBINE ROTOR | 2 | |
| 2C14602G03 | FIXTURE, LOCKING – LOW PRESSURE TURBINE ROTOR | 4 | |
| 2C14602G04 | FIXTURE, RESTRAIN - TURBINE REAR FRAME TO LOW PRESSURE TURBINE ROTOR | 2 | |
| 2C14651G01 | CHUCK COMPRESSOR ROTOR ASSEMBLY FIXTURE | 3 | |
| 2C14661G01 | FIXTURE, INSTALLATION/REMOVAL COMPRESSOR REAR FRAME ASSEMBLY | 2 | |
| 2C14661G02 | FIXTURE, REMOVAL COMPRESSOR EAR FRAME ASSEMBLY | 1 | |
| 2C14672G04 | FIXTURE, LIFT - HIGH PRESSURE TURBINE ASSEMBLY FORWARD | 1 | |
| 2C14692G01 | FIXTURE SITTING, LOW PRESS TURBINE NOZ STG 2&3 | 1 | |
| 2C14696G02 | FIXTURE, ASSEMBLY - STAGE 1 HIGH PRESSURE TURBINE NOZZLE | 1 | |
| 2C14699G01 | FIXTURE, LIFT - COMPRESSOR STATOR CASE, UPPER | 2 | |
| 2C14699G02 | FIXTURE, LIFT-COMPRESSOR STATOR VANE SPACER | 1 | |
| 2C14785G01 | FIXTURE, PULL - HIGH PRESSURE TURBINE ROTOR AFT AIR SEALS | 2 | |
| 2C14823G01 | FIXTURE,GRIND,HIGH PRESSURE TURBINE STAGE 2 SHROUDS | 1 | |
| 2C14858G01TK | FIXTURE INSTALL-HIGH PRESS.COMPR.BUMPER BRG. | 1 | |
| 2C14878 | FIXTURE - LIFT -COMPRESSOR ROTOR SPOOLS | 1 | |
| 2C15051G02 | FIXTURE, PRESSURE - AXIAL POSITION | 1 | |
| 2C15600G01 | FIXTURE, POSITION COMPRESSOR REAR FRAME SUMP | 1 | |
| 2C15600G01/P03 | COMPRESSOR REAR FRAME SUMP FIXTURE | 1 | |
| 2C5089G01 | FIXTURE COMPRESSOR ROTOR BUILDUP | 1 | |
| 2C5709G01 | FIXTURE - COMPRESSOR | 1 | |
| 2C6016 | FIXTURE VERTICAL LIFT-COMPRESSOR STATOR HALF | 1 | |
| 2C6016G04 | FIXTURE , VERTICAL LIFT COMPRESSOR STATOR HALF | 2 | |
| 2C6017G01 | FIXTURE,LIFT AND TURN-COMPRESS | 1 | |
| 2C6031G01JW94946 | FIXTURE,LIFT-COMPRESSOR SPOOL | 1 | |
| 2C6031G01 | FIXTURE, LIFT-COMPRESSOR ROT | 1 | |
| 2C6031G02 | FIXTURE, LIFT - COMPRESSOR ROTOR SPOOLS | 1 | |
| 2C6059 | FIXTURE LIFT - HIGH PRESS. TURBINE ROTOR, HORIZ. | 1 | |
| 2C6060 | FIXTURE, LIFT - NOZZLE HIGH PRESS, TURB NOZZLE, ST | 1 | |
| 2C6175 | COMPRESSOR CASE FIXTURE TOOL | 1 | |
| 2C6175G04 | FIXTURE, LIFT - COMPRESSOR STATOR CASE, UPPER | 1 | |
| 2C6515 | FIXTURE, INSPECT-COMPRESSOR | 1 | |
| 2C6515G01 | FIXTURE, INSPECT-COMPRESSOR | 1 | |
| 2C6549 | FIXTURE, HOLDING-COMPRESSOR | 1 | |
| 2C6549G01 | FIXTURE, HOLDING-COMPRESSOR | 1 | |
| 2C6552G04 | FIXTURE GRINDING HIGH PRESSURE TURBINE SHROUNDS TOOL | 1 | |
| 2C6576 | FIXTURE,HEAT-TREAT-HPTR PRESSU | 1 | |
| 2C6576G01 | FIXTURE,HEAT-TREAT-HPTR PRESSU | 1 | |
| 2C6624 | FIXTURE,BUILD-UP-COMPRESSOR RO | 1 | |
| 2C6624G01 | FIXTURE,BUILD-UP-COMPRESSOR RO | 1 | |
| 2C6856G04 | FIXTURE, LIFT ‐ FAN ROTOR AND LOW PRESSURE COMPRESSOR | 3 | |
| 2C6860G07 | FIXTURE,BUILD UP-HIGH PRESSURE TURBINE | 1 | |
| 2C6870 | FIXTURE HLDG STG 1 LOW PRESS TURB BLADE FMF 2C6861 | 1 | |
| 2C6870 REV A | FIXTURE, HOLDING STG. I LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C6871 | FIXTURE HLDG STG 2 LOW PRESS TURB BLADE FMF 2C6861 | 1 | |
| 2C6871 REV A | FIXTURE, HOLDING STG. 2 LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C6872 | FIXTURE HLDG STG 3 LOW PRESS TURB BLADE FMF 2C6861 | 1 | |
| 2C6872 REV A | FIXTURE, HOLDING STG. 3 LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C6873 | FIXTURE HLDG STG 4 LOW PRESS TURB BLADE FMF 2C6861 | 1 | |
| 2C6873 REV A | FIXTURE, HOLDING STG. 4 LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C687I | FIXTURE, HOLDING STG. 2 LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C6934P06 | CDP PAD - A SUMP PRESSURE TEST FIXTURE | 1 | |
| 2C7145 | FIXTURE,HOLDING-COMPRESSOR ROT | 1 | |
| 2C7145G01 | FIXTURE,HOLDING-COMPRESSOR ROT | 1 | |
| 2C7212 | FIXTURE,SHOT PEEN-COMPRESSOR B | 1 | |
| 2C7212G01 | FIXTURE,SHOT PEEN-COMPRESSOR B | 1 | |
| 2C7549 | FIXTURE, COMPRESSOR ROTOR BLADE LENGTH GAGE | 1 | |
| 2C7549 REV U | FIXTURE, COMPRESSOR ROTOR BLADE LENGTH GAGE | 1 | |
| 2C8072 | FIXTURE,PRESSURIZE-HORIZONTAL DRIVE SHAFT HOUSING | 1 | |
| 2C81145G01 | PRESSURE CHECK B-SUMP FIXTURE | 1 | |
| 2C81236G01 | FIXTURE, GENSPECT COMPRESSOR | 1 | |
| 2C90714G01 | T701C T701D>. FIXTURE, STAGE 2 GAS GENERATOR ROTOR FORWARD PRESSURE FLUSHING | 1 | |
| 2C91036G01 | FIXTURE - COMPRESSOR RUN OUT | 1 | |
| 2C91192G01 | FIXTURE-COMPRESSOR SUB ASSEMBLY | 1 | |
| 2F10183 | Fixture, Pressure Test | 1 | |
| 2J12602 | Fixture, Pressure Test | 1 | |
| 2J12603 | FIXTURE, PRESSURE TEST | 1 | |
| 2J12604 | Fixture, Pressure Test | 1 | |
| 2J12605 | Fixture, Pressure Test | 1 | |
| 2J12606 | Fixture, Pressure Test | 1 | |
| 2R1484G01 | FIXTURE, PRESS - CASE | 1 | |
| 30059 | COMPRESSOR STUBSHAFT FIXTURE | 1 | |
| 3048A0000-01 | PRESS IN FIXTURE | 1 | |
| 3050A0000-01 | PRESS IN FIXTURE | 1 | |
| 3051A0000-01 | PRESS IN FIXTURE | 1 | |
| 3176-4 | BEARING ASSEMBLING PRESS-IN FIXTURE | 1 | |
| 35004-0-2000 | Gear Press Fixture | 1 | |
| 35009-0-2000 | Bearing Press Fixture | 1 | |
| 3727324-1 | PRESSURE TEST FIXTURE ASSEMBLY | 1 | |
| 3727380-1 | PRESS AND STAKING FIXTURE | 1 | |
| 3791068-1 | FIXTURE PIN PRESS | 1 | |
| 3791274-1 | Wheel Press Fixture | 1 | |
| 3791276-1 | Wheel Press Fixture | 1 | |
| 390580TF1 | TEST FIXTURE, PRESSURE SENSOR | 1 | |
| 3A2984-1 | FIXTURE,PRESSURIZE-HORIZONTAL DRIVE SHAFT HOUSING | 3 | |
| 4-11241 | BUSHING PRESS FIXTURE | 1 | |
| 4.92001E 12 | FWD PRESSURE, FLUSH FIXTURE, STAGE 1 ROTOR | 1 | |
| 4041041-001 | FIXTURE, COMPRESSOR HOLDING | 1 | |
| 41408-T601 | PRESSING FIXTURE | 1 | |
| 42315-60-221 | SPRING COMPRESSION FIXTURE | 1 | |
| 470-24288J | COMPRESSION FIXTURE | 1 | |
| 470-24349J | COMPRESSION FIXTURE | 1 | |
| 470-27204J | COMPRESSION FIXTURE | 1 | |
| 55590S0000 | PRESS IN FIXTURE | 1 | |
| 55610S0000 | PRESS IN FIXTURE | 1 | |
| 558-1-05791 | PRESSURE TEST FIXTURE | 1 | |
| 558-1-05832 | PRESSURE TEST FIXTURE | 1 | |
| 558-1-13467-000 | PRESSURE TEST FIXTURE | 1 | |
| 558-1-13469-000 | FIXTURE OUTLET VALVE PRESSURE TEST | 1 | |
| 56562A0000 | PRESS IN PRESS OUT FIXTURE | 1 | |
| 56562A0000-01 | PRESS IN OUT FIXTURE | 1 | |
| 56565S0000 | PRESS IN FIXTURE | 1 | |
| 56572T3 | PRESSING FIXTURE | 1 | |
| 56572T4 | PRESSING FIXTURE | 1 | |
| 56593S0000 | PRESS IN FIXTURE | 1 | |
| 56699T2 | FIXTURE PRESSING | 1 | |
| 56901A0000-01 | PRESS OUT FIXTURE | 1 | |
| 56967A0000-01 | PRESS IN FIXTURE | 1 | |
| 56968A0000-01 | PRESS IN FIXTURE | 1 | |
| 56995A0000 | HYDRAULIC PRESSURE TEST FIXTURE | 1 | |
| 56995A0000-01 | HYDRAULIC PRESSURE TEST FIXTURE | 1 | |
| 57013A0000-01 | PRESS-IN FIXTURE | 1 | |
| 57093A0000-01 | PRESS-IN FIXTURE | 1 | |
| 57455A0000-01 | PRESS IN FIXTURE | 1 | |
| 57864A0000-01 | PRESS IN FIXTURE | 1 | |
| 57996T2 | PRESSING FIXTURE | 1 | |
| 58330-0004 | Press-in Fixture | 1 | |
| 58330-0005 | Press-in Fixture | 1 | |
| 58420A0000-01 | PRESS IN FIXTURE | 1 | |
| 58599A0000-01 | PRESS-OUT FIXTURE | 1 | |
| 58613-T4 | Pressing Fixture (out) | 1 | |
| 58613-T5 | Pressing Fixture (in) | 1 | |
| 58613T4 | PRESSING FIXTURE | 1 | |
| 58613T5 | PRESSING FIXTURE (IN) | 1 | |
| 58749-T600 | Pressing Fixture | 1 | |
| 58749T600 | PRESSING FIXTURE | 1 | |
| 58797A0000-01 | Press-in Fixture | 1 | |
| 59548A0000-01 | PRESS-IN FIXTURE | 1 | |
| 61393-T200 | PRESSING FIXTURE | 1 | |
| 623A050-A | SOUND PRESSURE GAUGE TEST FIXTURE | 1 | |
| 6398-AT1 | PRESS FIXTURE PARKER HSD ASSEMBLY | 1 | |
| 65-44761-21 | INPUT ARM PRESSING FIXTURE | 1 | |
| 65-44761-F21 | Input Arm Pressure Fixture | 1 | |
| 65-44834-F6 | Rod End Assembly Pressing Fixture | 1 | |
| 65572T1 | PRESSING FIXTURE | 2 | |
| 67587T5 | PRESSING FIXTURE | 1 | |
| 6895995-3 | Fixture Allignment Compresser Holder | 1 | |
| 69-35660-F1 | Arbor Press Fixture | 1 | |
| 69020-0140 | Arbor Press Fixture for Modular Plug, FCC 68, Short Body, 8/8 Circuit | 1 | |
| 69020-0320 | Arbor Press Fixture for Insulation Displacement Housings, 2-28 Circuit, 24-28 AWG Wire/ Ribbon Cable | 1 | |
| 69020-0680 | Arbor Press Fixture | 1 | |
| 69020-0710 | Arbor Press Fixture, 10-60 Circuit, 28 AWG Ribbon Cable | 1 | |
| 69020-0770 | Arbor Press Fixture | 1 | |
| 69020-1200 | Arbor Press Fixture | 1 | |
| 69020-1902 | Arbor Press Fixture | 1 | |
| 69020-1908 | Arbor Press Fixture | 1 | |
| 69020-1925 | Arbor Press Fixture | 1 | |
| 69020-2025 | Arbor Press Fixture | 1 | |
| 69020-2050 | Arbor Press Fixture | 1 | |
| 70376 | PRESSURE TEST FIXTURE | 1 | |
| 71776 | COMPRESSOR ROTOR HOLDING FIXTURE | 1 | |
| 72107 | COMPRESSOR TURBINE GRINDING FIXTURE | 1 | |
| 690411 | BLEED AIR SYSTEM PRESSURE AND LEAK CHECK TEST FIXTURE TOOL | 1 | |
| 739459 | PRESSURE TEST FIXTURE | 1 | |
| 820729 | ARBOR PRESS FIXTURE | 1 | |
| 6795582 | FIXTURE, COMPRESSOR TIE BOLT STRETCH | 2 | |
| 6795594 | FIXTURE ASSEMBLY COMPRESSOR ROTOR | 2 | |
| 6795966 | FIXTURE, SUPPORT COMPRESSOR | 3 | |
| 6796609 | GAGE ,SETTING,COMPRESSOR CASE BORING FIXTURE | 1 | |
| 6796667 | Holding Fixture Compressor Housing Assy Grit Blast | 2 | |
| 6796984 | INLET CASE PRESSURE TEST FIXTURE | 1 | |
| 6797670 | FIXTURE,HOLDING,COMPRESSOR ROTOR HOUSING | 1 | |
| 6798227 | FIXTURE, CHECKING, COMPRESSOR VANE ASSEMBLY | 1 | |
| 6798787 | FIXTURE - PRESSURE CHK, COMP DISCHARGE AIR TUBE AS | 1 | |
| 6799572 | FIXTURE,TEST,PRESSURE | 2 | |
| 6799815 | FIXTURE, PRESSURE TEST | 1 | |
| 6799816 | FIXTURE, PRESSURE TEST | 1 | |
| 6799818 | FIXTURE, PRESSURE TEST | 1 | |
| 6872162 | FIXTURE - PRESSURE TEST | 1 | |
| 6872601 | FIXTURE - WELDING, COMPRESSOR DISCHARGEAIR TUBE | 1 | |
| 6872603 | FIXTURE - PRESSURE TEST, COMP DISCHARGE AIR TUBE | 1 | |
| 6872632 | FIXTURE - MACHINING, COMPRESSOR CASE | 1 | |
| 6872804 | FIXTURE - PRESSURE CHECK | 1 | |
| 6872805 | FIXTURE - STRESS RELIEVE, COMPRESSOR CASE ASSY | 1 | |
| 6872806 | FIXTURE - WELD, COMPRESSOR STATOR VANE ASSY | 1 | |
| 6872811 | FIXTURE - BURNOUT, COMPRESSOR PLASIC COATING | 1 | |
| 6872880 | FIXTURE----CHECKING, COMPRESSOR MOUNTING INSERTS (GEARBOX) | 1 | |
| 6872984 | FIXTURE - HOLDING, COMPRESSOR REAR | 1 | |
| 6873066 | FIXTURE-COMPRESSOR | 1 | |
| 6877012 | HOLDING FIXTURE PRESSURE TEST | 1 | |
| 6877014 | PURGE FIXTURE, AIR (CHECK VALVE REMOVAL) BACK PRESSURES FUEL NOZZLE TO BLOW CHIPS OUT OF NOZZLE DURING CHECK VALVE MACHINING OPERATION. | 1 | |
| 6877021 | SEAL FIXTURE, SECONDARY ORIFICE (WITH INLET SIMULTANEOUSLY CONNECTS METERING AND EXIT HOSE) TIP AND INLET OF FUEL NOZZLE ASSEMBLY TO PRESSURE SOURCE FOR PROOF TESTING. | 1 | |
| 6877108 | ASSEMBLY FIXTURE ASSISTS REMOVAL OF CARTRIDGE VALVE FROM FUEL NOZZLE CARTRIDGE VALVE CAVITY USING AIR PRESSURE THROUGHTIP END. | 1 | |
| 6887000 | PRESSURE DECAY TEST FIXTURE | 1 | |
| 6887006 | PRESSURE TEST FIXTURE INLET COVER | 1 | |
| 6893360 | FIXTURE - ASSEMBLY, COMPRESSOR | 2 | |
| 6893363 | FIXTURE - PRESSURE CHECK | 1 | |
| 6893383 | FIXTURE - COMPRESSOR AXIS ALIGNMENT | 2 | |
| 6895994 | FIXTURE - PRESSURE TEST | 1 | |
| 6897006 | PRESSURE TEST FIXTURE, INLET COVER | 1 | |
| 6897103 | HOLDING FIXTURE, TIP SEAL HOLDS METERING SET SEAL FIXTURES ON FUEL NOZZLE FOR PRESSURE TESTING. | 1 | |
| 6897104 | SEAL FIXTURE, PRIMARY ORIFICE PLUGS PRIMARY ORIFICE DURING PAST WELD PRESSURE TEST, NO SECONDARY PRESENT. | 1 | |
| 6897434 | FIXTURE--CONCENTRICITY, COMPRESSOR ROTOR | 1 | |
| 460002929 | PRESS TEST FIXTURE | 1 | |
| 460006125 | MANIFOLD PRESSURE TEST RIG FIXTURE | 1 | |
| 460006470 | PRESSURE TEST FIXTURE | 1 | |
| 4920012417454 | FWD PRESSURE, FLUSH FIXTURE, STAGE 1 ROTOR | 1 | |
| 4920012417455 | FWD PRESSURE, FLUSH FIXTURE, STAGE 2 ROTOR | 1 | |
| 7-363300003 | GUN STOW SPRING COMPRESSOR FIXTURE | 1 | |
| 79000132-1 | PRESSURE TEST FIXTURE ASSEMBLY | 1 | |
| 79002081-1 | PRESS AND STAKING FIXTURE | 1 | |
| 830006-809-00671 | ARBOR PRESS FIXTURE TAIL ROTOR GEARBOX HOUSING | 1 | |
| 83006-809-00090-1 | ARBOR PRESS FIXTURE | 1 | |
| 83006-809-00090-8 | ARBOR PRESS FIXTURE | 1 | |
| 831132-1 | Bearing Press Fixture Split Plate | 1 | |
| 833093-1 | TURBINE COMPRESSOR HOLDER FIXTURE | 1 | |
| 833102-1 | COMPRESSOR CENTERING FIXTURE | 1 | |
| 833110-12 | FIXTURE, SEAL PRESSING | 1 | |
| 833180 | FIXTURE PIN PRESS | 1 | |
| 833180-1 | Pin Press Fixture (2 ITEMS) | 1 | |
| 833187-1 | PLENUM PRESS FIXTURE | 1 | |
| 833201-1 | FIXTURE BEARING PRESSING | 1 | |
| 833202-1 | SET FIXTURE BEARING PRESSING | 1 | |
| 833221-1 | FIXTURE PRESS | 1 | |
| 833289-1/-2 | Reducer Tube Press Fixture | 1 | |
| 833311-1 | PIN PRESS FIXTURE | 1 | |
| 833437-1 | FIXTURE, BEARING PRESS | 1 | |
| 833438-2 | FIXTURE BEARING PRESS | 1 | |
| 833468-1 | Shaft Roller Press Fixture | 1 | |
| 833543-1 | FIXTURE ASSEMBLY SEAL PRESS | 1 | |
| 833858-1 | Holding Press Fixture | 1 | |
| 834018-1 | CLUTCH ROTOR PRESS FIXTURE | 1 | |
| 834213-1 | Spring Compressor Fixture | 1 | |
| 834223-1 | SPRING COMPRESSION FIXTURE | 1 | |
| 834223-1PM | SPRING COMPRESSION FIXTURE | 1 | |
| 834223-2 | SPRING COMPRESSION FIXTURE | 1 | |
| 834223-2PM | SPRING COMPRESSION FIXTURE | 1 | |
| 834533-1 | PRESSURE TEST FIXTURE | 1 | |
| 834640-1 | BALLSCREW PRESS FIXTURE | 1 | |
| 834675-1 | COMPRESSOR ROTOR INSTALL FIXTURE | 1 | |
| 834846-1 | FIXTURE, TEST, PRESSURE SENSOR | 1 | |
| 834864-1 | DRIVEN COMPRESSOR COUPLING SHAFT HOLDING FIXTURE | 1 | |
| 835094-1 | Compress Fixture | 1 | |
| 835689-1 | BEARING PRESS FIXTURE | 1 | |
| 835700-1 | BEARING PRESS FIXTURE | 1 | |
| 835701-1 | BEARING PRESS FIXTURE | 1 | |
| 835703-1 | BEARING PRESS FIXTURE | 1 | |
| 835801-1 | Seal Press Fixture | 1 | |
| 835819-1 | Race Press Fixture | 1 | |
| 835839-1 | Press and Torque Fixture | 1 | |
| 835869-1 | Bearing Press Fixture | 1 | |
| 856A1021 | FIXTURE, LIFT & TURN - COMPRESSOR ROTOR ASSY | 1 | |
| 856A1021G01 | FIXTURE, LIFT & TURN - COMPRESSOR ROTOR ASSY | 1 | |
| 856A1021G02 | FIXTURE, LIFT & TURN - COMPRESSOR ROTOR ASSY | 11 | |
| 856A1026G02 | FIXTURE, LIFT - COMPRESSOR ROTOR, STAGE 4-9 SPOOL, AFT HPTR | 4 | |
| 856A1027 | FIXTURE, LIFT - COMPRESSOR ROTOR STAGE 3 DISK AND BLADES | 1 | |
| 856A1027 G01 | Lift Fixture - Compressor Rotor Stage 3 Disk and Blades | 10 | |
| 856A1027G01 | FIXTURE, LIFT - COMPRESSOR. | 10 | |
| 856A1028 | FIXTURE, LIFT - COMPRESSOR ROTOR SIG 1&2 SPOOL AFT-STG 4-9 SPOOL FWD | 1 | |
| 856A1028G01 | FIXTURE, LIFT - COMPRESSOR ROTOR SIG 1&2 SPOOL AFT-STG 4-9 SPOOL FWD | 10 | |
| 856A1029 | FIXTURE, LIFT - COMPRESSOR ROTOR STAGE 1-2 SPOOL, FORWARD | 1 | |
| 856A1029G01 | FIXTURE, LIFT - COMPRESSOR ROTOR STAGE 1-2 SPOOL, FORWARD | 1 | |
| 856A1029G02 | FIXTURE, LIFT - COMPRESSOR ROTOR STAGE 1-2 SPOOL, FORWARD | 2 | |
| 856A1056 G05 | Fixture, Grind - Compressor Stator Flowpath | 8 | |
| 856A1056G03 | FIXTURE, GRIND - COMPRESSOR STATOR FLOW PATH (GRIND FIXTURE) | 1 | |
| 856A1056G04 | FIXTURE, GRIND - COMPRESSOR STATOR FLOWPATH | 5 | |
| 856A1056G05 | FIXTURE, GRIND - COMPRESSOR STATOR FLOWPATH | 8 | |
| 856A1062G01 | FIXTURE CHILL（TO PROVIDE FOR CHILLING OF THE HIGH PRESSURE TURBINE FORWARD SHAFT.） | 1 | |
| 856A1074 | FIXTURE, LIFT AND TURN HIGH PRESSURE TURBINE ROTOR DISK, AFT | 1 | |
| 856A1074G02 | FIXTURE, LIFT AND TURN HIGH PRESSURE TURBINE ROTOR DISK, AFT | 4 | |
| 856A1074G03 | FIXTURE, LIFT AND TURN HIGH PRESSURE TURBINE ROTOR DISK, AFT | 1 | |
| 856A1075 | FIXTURE, LIFT AND TURN HIGH PRESSURE TURBINE ROTOR DISK, AFT | 1 | |
| 856A1075G03 | FIXTURE, LIFT AND TURN HIGH PRESSURE TURBINE ROTOR DISK, AFT | 6 | |
| 856A1140 | FIXTURE, SUPPORT - CORE MODULE TO COMPRESSOR ROTOR SHAFT | 1 | |
| 856A1140 G05 | FIXTURE, SUPPORT - CORE MODULE TO COMPRESSOR ROTOR SHAFT | 1 | |
| 856A1140G05 | FIXTURE, SUPPORT - CORE MODULE TO COMPRESSOR ROTOR SHAFT | 1 | |
| 856A1140G06 | FIXTURE, SUPPORT - CORE MODULE TO COMPRESSOR ROTOR SHAFT | 10 | |
| 856A1150 | FIXTURE, BUILDUP - COMPRESSOR ROTOR | 1 | |
| 856A1150G02 | FIXTURE, BUILD UP, COMPRESSOR ROTOR | 1 | |
| 856A1150G04 | FIXTURE, BUILDUP - COMPRESSOR ROTOR | 2 | |
| 856A1171 | FIXTURE, PRESS TEST NO 3 BRG AFT AIR/OIL SEAL | 1 | |
| 856A1171G03 | Fixture Pressure Test #3 Stationary | 1 | |
| 856A1171G05 | FIXTURE, PRESSURE TEST - SEAL, STATIONARY, NO. 3 BEARING AFT (PRESSURE TEST FIXTURE) | 1 | |
| 856A1171G06 | FIXTURE, PRESS TEST, #3 BRG AFT AIR/OIL SEAL | 2 | |
| 856A1195G02 | FIXTURE ASSY - HIGHT PRESSURE COMPRESSOR | 4 | |
| 856A1204 | FIXTURE, REMOVAL HIGH PRESSURE COMPRESSOR ROTOR | 1 | |
| 856A1204G01 | FIXTURE, REMOVAL HIGH PRESSURE | 10 | |
| 856A1212 G01 | Fixture, Compressor Rotor Blade Length Gage | 1 | |
| 856A1212G02 | Fixture, Compressor | 1 | |
| 856A1212G08 | Compress Fixture | 1 | |
| 856A1212G09 | Compress Fixture | 1 | |
| 856A1212G10 | FIXTURE, COMPRESSOR ROTOR BLADE LENGTH GAGE | 1 | |
| 856A1212G11 | FIXTURE, COMPRESSOR ROTOR BLADE | 6 | |
| 856A1252G02 | FIXTURE, REMOVAL HIGH PRESSURE | 5 | |
| 856A1299G02 | FIXTURE, BLADE REMOVAL - HIGH PRESSURE TURBINE ROTOR (BLADE REMOVAL FIXTURE) | 2 | |
| 856A1334G01 | FIXTURE, BUILDUP - CORE ENGINE/HP COMPRESSOR ROTOR (BUILDUP FIXTURE) | 1 | |
| 856A1334G02 | FIXTURE, BUILDUP - CORE ENGINE/HP COMPRESSOR ROTOR (BUILDUP FIXTURE) | 1 | |
| 856A1334G03 | Fixture, Buildup - Core Engine/HP Compressor Rotor (buildup fixture) | 9 | |
| 856A1334G04 | FIXTURE, BUILDUP - CORE ENGINE/HP COMPRESSOR ROTOR (BUILDUP FIXTURE) | 4 | |
| 856A1344G02 | Fixture, Setup - Core Engine/HP Compressor Rotor Buildup | 7 | |
| 856A1356G02 | FIXTURE, LIFT - COMPRESSOR ROTOR | 5 | |
| 856A1385G02 | FIXTURE, LIFT - COMPRESSOR/LPT, HORIZONTAL (LIFT FIXTURE) | 3 | |
| 856A1411G04 | FIXTURE RING COMPRESSION HPT | 4 | |
| 856A1417 | FIXTURE LIFT AND TURN - HIGH PRESSURE TURB ROTOR DISK, FORWARD | 1 | |
| 856A1417G04 | FIXTURE LIFT AND TURN - HIGH PRESSURE TURB ROTOR DISK, FORWARD | 7 | |
| 856A1421 | FIXTURE, LIFT - HP COMPRESSOR CASE FRONT STATOR ASSEMBLY (LIFT FIXTURE) | 1 | |
| 856A1421 G01 | Fixture Lift ‐ HP Compressor Case Front Stator | 10 | |
| 856A1421G01 | FIXTURE LIFT ‐ HP COMPRESSOR CASE FRONT STATOR AS | 10 | |
| 856A1421G02 | FIXTURE, LIFT - HP COMPRESSOR STATOR CASE FRONt | 9 | |
| 856A1431G03 | FIIXTURE, RESTRAINING-HPT NOZZLE ASSEMB(THE RESTRAIN FIXTURE IS USED TO RESTRAIN THE NOZZLE SEGMENTS OF THE HP TURBINE NOZZLE ASSEMBLY CIRCUMFERENTIALLY DURING THE INSTALLATION OR REMOVAL FROM THE COMPRESSOR REAR FRAME (CRF) | 7 | |
| 856A1442G02 | FIXTURE, CHILL - HIGH PRESSURE TURBINE ROTOR AFT BLADE RETAINER | 1 | |
| 856A1475G03 | FIXTURE, DUMMY - HIGH PRESSURE TURBINE STATOR FORWARD (DUMMY FIXTURE) | 3 | |
| 856A1802G03 | FIXTURE, DUMMY - HIGH PRESSURE TURBINE STATOR FORWARD (DUMMY FIXTURE) | 1 | |
| 856A1820G01 | FIXTURE, SUPPORT - HP COMPRESSOR | 5 | |
| 856A1839 | FIXTURE, DISASSEMBLY - HPT/ HP COMPRESSOR ROTOR | 1 | |
| 856A1839G01 | FIXTURE, DISASSEMBLY-HPT/HP COMPRESSOR ROTOR | 8 | |
| 856A1845 | FIXTURE, ALIGNING - HIGH PRESSURE COMPRESSOR | 1 | |
| 856A1845G01 | FIXTURE, ALIGNING HIGH PRESSURE | 3 | |
| 856A1845G01 | FIXTURE, ALIGNING HIGH PRESSURE COMPRESSOR | 3 | |
| 856A1845G02 | FIXTURE, ALIGNING-HIGH PRESSURE COMPRESSOR | 3 | |
| 856A1845G03 | Fixture, Aligning - High Pressure Compressor | 5 | |
| 856A2341G03 | FIXTURE, PULLER/PRESS - NO. 2 ROLLER BEARING OUTER RACE | 1 | |
| 856A2710G05 | LOW PRESSURE TURBINE MAJOR MODULE HANDLING FIXTURE | 7 | |
| 856A2713G07 | LOW PRESSURE TURBINE SHAFT TO LOW PRESSURE TURBINE MODULE BUILDUP FIXTURE | 8 | |
| 856A2714 | LOW PRESSURE TURBINE MODULE HOIST FIXTURE | 1 | |
| 856A2758G02 | LOW PRESSURE TURBINE SHAFT TO LOW PRESSURE TURBINE CENTERING FIXTURE | 6 | |
| 856A3488G01 | LOW PRESSURE TURBINE SHAFT SUPPORT HOLDING FIXTURE | 4 | |
| 856A3504 | LOW PRESSURE TURBINE MODULE PUSH/PULL FIXTURE | 1 | |
| 856A3750G02 | LOW PRESSURE TURBINE SHAFT MODULE CENTERING FIXTURE | 13 | |
| 856A3790G01 | LOW PRESSURE TURBINE REAR VENT TUBE FIXTURE | 7 | |
| 856A3793 | LOW PRESSURE TURBINE CENTER VENT TUBE FIXTURE | 3 | |
| 856A3918 | FIXTURE, PULLER / PRESS NO 2 ROLLER BEARING OUTER RACE | 1 | |
| 856A3918G01 | FIXTURE, PULLER / PRESS NO 2 ROLLER BEARING OUTER RACE | 1 | |
| 856A3918G02 | FIXTURE, PULLER / PRESS NO 2 ROLLER BEARING OUTER RACE | 2 | |
| 856A3918G03 | Fixture, Puller/Press - No. 2 Roller Bearing Outer Race (puller/press fixture) | 4 | |
| 856A4028G02 | FIXTURE MACHINING COMPRESSOR ROTOR AIR DUCT | 1 | |
| 856A4044G01 | FIXTURE MACHINING COMPRESSOR ROTOR SPOOL, STAGE4 THRU STAGE 9 | 1 | |
| 856A4046G02 | FIXTURE MACHINING COMPRESSOR ROTOR SHAFT | 1 | |
| 856A5809 | INFLATABLE PRESSURE FIXTURE - FAN FRAME ABRADABLE LINER | 1 | |
| 856A5944 | LOW PRESSURE TURBINE SHAFT ALIGNMENT FIXTURE | 1 | |
| 856A6623 | INFLATABLE PRESSURE FIXTURE - FAN FRAME ABRADABLE LINER | 1 | |
| 856AI02I | FIXTURE, LIFT & TURN - COMPRESSOR ROTOR ASSY | 1 | |
| 8943-0-2000 | Bearing Press Fixture | 1 | |
| 8955-0-2000 | Bearing Press Fixture | 1 | |
| 8C2151 | FIXTURE, BUILD-UP - COMPRESSOR FWD STATORS | 1 | |
| 8C2188 | FIXTURE, LIFT - COMPRESSOR STATOR RINGS | 1 | |
| 8C2189 | FIXTURE, SUPPORT - AFT COMPRESSOR INNER STATOR ASSEMBLY | 1 | |
| 8C2405 | FIXTURE, PUSH/PULL-LOW PRESSURE TURBINE MODULE & FAN MODULE | 1 | |
| 8C2720 | FIXTURE,RESTRAIN - COMPRESSOR ROTOR, AFT (SERVICE SHOP TOOL ONLY) | 1 | |
| 8C2760 | FIXTURE, BUILD-UP - COMPRESSOR MODULE | 1 | |
| 8C3191 | FIXTURE - RESTRAINING - LOW PRESSURE TURBINE CASE | 1 | |
| 8C4115 | FIXTURE - REMOVE - BLADE LOW PRESSURE COMPRESSOR | 1 | |
| 8C4118 | FIXTURE - STOCK - BLADE LOW PRESSURE COMPRESSOR | 1 | |
| 905696-1-1 | FIXTURE ALIGNMENT AND PRESSING | 1 | |
| 907876-1-1 | BUSHING AND STATOR PRESSING FIXTURE | 1 | |
| 9446M61G02 | FIXTURE, LIFT - COMPRESSOR STATOR CASE, UPPER, SET | 1 | |
| 9461M18G02 | FIXTURE PRESSURE CHECK | 1 | |
| 9485M28 | FIXTURE, PRESSURE TEST - ACCESSORY GEARBOX | 1 | |
| 9486M85 | FIXTURE - PRESSURE TEST | 1 | |
| 956A1153 | FIXTURE - SHIM HP COMPRESSOR STATOR AFT CASE | 1 | |
| 956A1229 | FIXTURE - DISASSEMBLY - HPT ROTOR/HP COMPRESSOR ROTOR | 1 | |
| 956A1234 | FIXTURE - SUPPORT - AFT COMPRESSOR CASE | 1 | |
| 956A1729 | FIXTURE - SUPPORT - AFT COMPRESSOR CASE | 1 | |
| 956A3129 | FIXTURE - SUPPORT - DISASSEMBLY - HIGH PRESSURE COMPRESSOR ROTOR | 1 | |
| 956A3155 | FIXTURE - LIFT - FWD COMPRESSOR CASE HALF | 1 | |
| 956A3173G02 | VARIABLE STATOR VANE HIGH PRESSURE COMPRESSOR (HPC) TURNBUCKLE GAUGING FIXTURE | 1 | |
| 956A3234 | FIXTURE - SUPPORT - AFT COMPRESSOR CASE | 1 | |
| 956A3734 | FIXTURE - LIFT COMPRESSOR MODULE/SUPPORT ? AFT COMPRESSOR CASE | 1 | |
| 956A6850 | FIXTURE - ASSY/DIASSY - LOW PRESURE COMPRESSOR | 1 | |
| 956A6854 | FIXTURE - STOCK - BLADE LOW PRESSURE COMPRESSOR | 1 | |
| 956A6860 | FIXTURE - LIFTING- VANE LOW PRESSURE COMPRESSOR | 1 | |
| 956A6866 | FIXTURE - LIFTING - SPOOL LOW PRESSURE COMPRESSOR | 1 | |
| 956A6866G01 | Fixture, lifting - Spool Low Pressure Compressor | 1 | |
| 956A6878 | FIXTURE - BALANCING - LOW PRESSURE COMPRESSOR | 1 | |
| 956A8854 | FIXTURE - STOCK - BLADE LOW PRESSURE COMPRESSOR | 1 | |
| 956A8858 | FIXTURE - LIFTING- VANE LOW PRESSURE COMPRESSOR | 1 | |
| 956A8860 | FIXTURE - LIFTING - SPOOL LOW PRESSURE COMPRESSOR | 1 | |
| 956A8869 | FIXTURE - BALANCING - LOW PRESSURE COMPRESSOR | 1 | |
| 96400-0-2000 | Gear Press Fixture | 1 | |
| 96400-0-2000 PM | GEAR PRESS FIXTURE | 1 | |
| 970613 | ARBOR PRESS FIXTURE | 1 | |
| 9887000 | PRESSURE DECAY TEXT FIXTURE | 1 | |
| 98D27403003052 | HYDRAULIC ASSEMBLY PUMP WITH PRESSURE HOSESFIXTURE STRUT THSA | 1 | |
| 9C1197 | FIXTURE SET - GUIDE - COMPRESSO | 1 | |
| 9C2054 | PRESSURE TEST FIXTURE | 1 | |
| 9C3165 | FIXTURE, TORQUE REACTION - LOW PRESSURE TURBINE SHAFT TO ELECTRONIC NUTRUNNER | 1 | |
| A-A142463-1/03 | PRESSURE TEST FIXTURE (3 IT) | 1 | |
| A28004-1 | CHECK FIXTURE - SURGE TANK PRESSURE RELIEF VALVE | 4 | |
| A689565 | COMPRESSION FIXTURE | 1 | |
| A689565 PM | COMPRESSION FIXTURE | 1 | |
| AA292579 | SPRING COMPRESSOR TOOL NO. AA292579 FOUR (4) REPLACEMENT HOSES FOR CYLINDER HEAD HYDRAULIC MOUNTING FIXTURE AA293268 | 1 | |
| AB27001-Y2F | HYDRAULIC ASSEMBLY PUMP WITH PRESSURE HOSESFIXTURE STRUT THSA | 1 | |
| AD-556124 | Fixture – Pressure Test, Propeller Shaft Assy. | 2 | |
| AGE-11820 | FIXTURE, COMPRESSION ASEEMBLY | 2 | |
| AGE-13093 | FIXTURE, COMPRESSION ASEEMBLY | 3 | |
| AGE10069 | FIXTURE, PRESSURE TEST | 2 | |
| AGE10260 | COMPRESSOR FIXTURE, VALVE SPRING | 1 | |
| AGE11357 | DELTA PRESSURE TEST FIXTURE | 2 | |
| AGE11358 | FIXTURE, DELTA P PRESSURE TEST | 2 | |
| AGE11820 | ASSEMBLY FIXTURE COMPRESSION TOOL | 2 | |
| AGE12854/AGE13154 | DIFFERENTIAL PRESSURE INDICATOR TEST FIXTURE | 1 | |
| AGE13093 | FIXTURE, COMPRESSION ASEEMBLY | 3 | |
| AGE13153 | Scavenge Filter Delta Pressure Switch Test Fixture | 1 | |
| AGE13593 | PRESSURE LEAK TEST FIXTURE | 2 | |
| AGE14092 | FIXTURE, PRESSURE TEST, ASSEMBLY | 2 | |
| AGE15187 | PRESSURE DROP HOLDING FIXTURE | 1 | |
| AGE16551 | FIXTURE, SPRING COMPRESSION | 1 | |
| AGE19266 | COMPRESSION FIXTURE | 1 | |
| AT-3346 | FIXTURE PRESSING | 1 | |
| AT1 1 1 9 | BEARING PRESSING FIXTURE, | 1 | |
| AT3294 | FIXTURE, BEARING PRESSING, APU | 1 | |
| AT5426 | PIN PRESSING FIXTURE, | 1 | |
| B42365-1-TF | PROOF PRESSURE TEST FIXTURE | 1 | |
| C107-06-0114 | PRESSURE TEST FIXTURE, | 1 | |
| C107-06-0478 | PRESSURE TEST FIXTURE | 1 | |
| C12987 | FIXTURE,PRESS. TEST-FLAP | 1 | |
| C202-32-0711 | SEAL PRESS FIXTURE | 1 | |
| C28005-29 | Check Fixture Equ Pressure Relief Valve | 1 | |
| C47767 | COMPRESSION FIXTURE | 1 | |
| C47884 | COMPRESSING FIXTURE | 1 | |
| C47888 | COMPRESSING FIXTURE | 1 | |
| C47969 | COMPRESSION FIXTURE | 1 | |
| C47978 | Compression Fixture | 1 | |
| C47988 | COMPRESSION FIXTURE | 1 | |
| C52001-1 | Holding Fixture - Compressed Spring Cartridge | 4 | |
| C52004 | HOLDING FIXTURE - COMPRESSED SPRING CARTRIDGE | 1 | |
| C52004-1 | HOLDING FIXTURE - COMPRESSED SPRING CARTRIDGE | 11 | |
| CF65B40907 | CHECK FIXTURE - PRESSURE RELIEF VALVE ASSEMBLY, AIR CONDITIONING | 1 | |
| CODE 690411 | BLEED AIR SYSTEM PRESSURE AND LEAK CHECK TEST FIXTURE TOOL | 1 | |
| CODE690411 | BLEED AIR SYSTEM PRESSURE AND LEAK CHECK TEST FIXTURE TOOL | 1 | |
| COMMERCIAL | ARBOR PRESS FIXTURE | 1 | |
| CPWA-30405 | Pressure Test Fixture | 1 | |
| CPWA-30452 | Fixture – Aligning, Compressor Rotor Assembly | 1 | |
| CPWA30405 | PRESSURE TEST FIXTURE | 1 | |
| Commercial | Arbor Press Fixture | 1 | |
| D21851-5000 | D21851-5000 OR U21905200 LOW-PRESSURE TEST FIXTURE | 1 | |
| D46036 | COMPRESSING FIXTURE | 1 | |
| D46105 | COMPRESSION FIXTURE | 1 | |
| D46110 | COMPRESSION FIXTURE | 4 | |
| D46575 | COMPRESSION FIXTURE | 2 | |
| DBS-CG7 | Tension Verification Compression Fixture for DBS-2100 Hand Operated .250 Wide One-Step Band Application Tool | 3 | |
| DBS-CG8 | Tension Verification Compression Fixture for DBS-2200 Hand Operated .125 Wide One-Step Band Application Tool | 3 | |
| DRT67326 | FIXTURE-COMPRESSION | 1 | |
| EAS/B/1206 | CHECK FIXTURE EQUIPMENT - PRESSURE RELIEF VALVE | 1 | |
| Ex-74971 | Fixture, holding, compressor vane assy | 1 | |
| Ex-74972 | Fixture, holding, compressor vane assy | 1 | |
| F11343 | PRESSING FIXTURE | 1 | |
| F23393000 | COMPRESSION FIXTURE | 1 | |
| F26693000 | COMPRESSION FIXTURE | 7 | |
| F72919 | TEST FIXTURE -0 PRESSURE OPERATED SELECTOR VALVE | 1 | |
| F72919-1 | TEST FIXTURE - PRESSURE OPERATED SELECTOR VALVE ASSEMBLY | 1 | |
| F80166 | TEST FIXTURE - PRESSURE RELIEF VALVE, FLAME ARREST | 1 | |
| F80166-1 | Test Fixture - Pressure Relief Valve, Flame Arrestor Surge Tank | 26 | |
| FD7043T-1 | TEST FIXTURE - PRESSURE RELIEF VALVE, FLAME ARRESTOR SURGE TANK | 1 | |
| FVS-33203 | Pressure Test Fixture | 1 | |
| FXT-03438 | Spring Compression Fixture | 1 | |
| FXT-03934 | BEARING PRESS FIXTURE | 1 | |
| FXT-04335 | HOLDING COMPRESSION FIXTURE | 1 | |
| FXT-12254 | PRESSURE SENSOR TEST FIXTURE | 1 | |
| FXT03934 | BEARING PRESS FIXTURE | 1 | |
| G28005 | CHECK FIXTURE EQPT. PRESSURE RELIEF VALVE | 1 | |
| G28005-14 | CHECK FIXTURE EQUIPMENT - PRESSURE RELIEF VALVE | 4 | |
| G28005-18 | CHECK FIXTURE EQUIPMENT - PRESSURE RELIEF VALVE | 2 | |
| G28005-23 | CHECK FIXTURE EQUIPMENT - PRESSURE RELIEF VALVE | 3 | |
| G28005-29 | CHECK FIXTURE EQUIPMENT - PRESSURE RELIEF VALVE | 5 | |
| G28005-35 | Check Fixture Equipment - Pressure Relief Valve | 17 | |
| G28005-4 | CHECK FIXTURE EQUIPMENT - PRESSURE RELIEF VALVE | 1 | |
| G28005-42 | Check Fixture Equipment - Pressure Relief Valve | 2 | |
| G28005-48 | CHECK FIXTURE EQUIP. PRESSURE RELIEF VALVE | 3 | |
| G600-320026-123 | FIXTURE BRAKE PEDAL PRESSURE TEST | 3 | |
| G600−320026−123 | FIXTURE − BRAKE PEDAL PRESSURE TEST | 3 | |
| G601R324303-1 | FIXTURE - BRAKE-PEDAL PRESSURE TEST | 1 | |
| G601R324303−1 | Fixture − Brake Pedal Pressure Test | 1 | |
| GS10757 | OIL PRESSURE RELIEF VALVE FIXTURE | 1 | |
| GS10877 | FIXTURE PRESSURE TEST | 1 | |
| GS13050-1 | FIXTURE, SEAL COMPRESSING | 1 | |
| GS13381 | FIXTURE SEAL COMPRESSI | 1 | |
| GS13450 | FIXTURE COMPRESSION IN | 1 | |
| GS13797-1 | FIXTURE COMPRESSOR HSG | 2 | |
| GS13934-1 | FIXTURE COMPRESSION | 1 | |
| GS14202-1 | FIXTURE, PRESS | 1 | |
| GS15047-1 | TEST FIXTURE LOW PRESSURE ASSY | 13 | |
| GS15768-1 | FIXTURE – 0 RING COMPRESSOR | 1 | |
| GS19468-1 | FIXTURE, SEAL COMPRESSION | 1 | |
| GS20382-1 | FIXTURE, BEARING PRESS | 1 | |
| GS20722-1 | FIXTURE, PRESSURE TEST | 1 | |
| GS21615-1 | FIXTURE, TEST, PRESS. RELIEF VALVE | 1 | |
| GS22235-1 | FIXTURE, VALVE PRESSURE TEST | 1 | |
| GS22266-1 | FIXTURE, PRESSURE & LEAKAGE TEST | 2 | |
| GS22320-2 | FIXTURE, PRESSURE TEST | 2 | |
| GS22330-1 | Compressor End Holding Fixture | 2 | |
| GS22339-1 | Pressure Test Fixture | 1 | |
| GS22664-1 | VALVE PRESSURE TEST FIXTURE (3IT) | 1 | |
| GS22664-2 | VALVE PRESSURE TEST FIXTURE | 1 | |
| GS24091-1 | HOLDING FIXTURE, PRESSURE TEST | 1 | |
| GS24178-1 | PRESSURE TEST FIXTURE | 1 | |
| GS24299-1 | FIXTURE, PRESSURE TEST | 1 | |
| GS24326-1 | FIXTURE, PRESSURE TEST | 1 | |
| GS24685-1 | FIXTURE, PRESSURE TEST | 1 | |
| HALOCARBON SERIES 25-5S | ARBOR PRESS FIXTURE | 1 | |
| HS7146 | FIXTURE-PRESS. REG VALVE TEST | 1 | |
| HS7672 | FIXTURE - PRESS. REG. VALVE TEST | 2 | |
| HS7718 | TEST FIXTURE - HIGH PRESSURE RELIEF VALVE | 1 | |
| HS8740 | FIXTURE-TEST, PRESSURE | 1 | |
| HS8742 | FIXTURE TEST PRESS VAL | 1 | |
| HS9486 | PRESSURIZING AND REGULATING VALVE FIXTURE | 1 | |
| HS9512 | FIXTURE - SPRING COMPRESSING | 2 | |
| HTE29671 | PRESSURE TEST FIXTURE FOR CONDUCTING TEST ON GUIDE TUBE ASSY (P/N CH1543A0011) | 1 | |
| IAE1R18209 | FIXTURE, GRINDING - HP COMPRESSOR, STAGE 6 VARIABLE STATOR VANES | 1 | |
| IAE2J12602 | FIXTURE, PRESSURE TEST | 1 | |
| IAE2J12603 | FIXTURE, PRESSURE TEST | 1 | |
| IAE2J12604 | FIXTURE, PRESSURE TEST | 1 | |
| IAE2J12610 | FIXTURE PRESSURE TEST | 1 | |
| IAE2J12610A | PRESSURE TEST FIXTURE | 1 | |
| J47177 | COMPRESSION FIXTURE | 3 | |
| K32044-1 | TEST SUPPORT FIXTURE, TIRE PRESSURE SENSOR (TPS) INSTALLATION | 4 | |
| LTCT1247-01 | Fixture, Test, Oil Pressure | 1 | |
| LTCT13442 | FIXTURE, PRESSURE CHECK - TUBE ASSY | 1 | |
| LTCT13668-01 | Torque Fixture, Compressor Rotor | 1 | |
| LTCT14610-01 | Fixture Assembly, Pressure Test Set | 1 | |
| LTCT14736-02 | Fixture Assembly, Compressor Rotor Checking | 1 | |
| LTCT2048 | COMPRESSOR PINION GEAR HOLDING FIXTURE | 1 | |
| LTCT30835-01 | Fixture, Pressure, Check Tube Assembly | 1 | |
| LTCT3694 | FIXTURE,TEST,PRESSU | 1 | |
| LTCT3880 | Fixture, Centering, Compressor Rotor | 2 | |
| LTCT4535 | FIXTURE, OIL PRESSURE | 1 | |
| LTCT4875 | FIXTURE,TEST,PRESS | 2 | |
| LTCT5157X | Fixture, Torque, Pressure Nut | 1 | |
| LTCT5455 | Fixture-Centering Compressor Rotor | 1 | |
| LTCT5550x | Fixture, Pressure - T-Meter Valve | 1 | |
| LTCT6641 | Holding Fixture (Compressor Rotor) | 1 | |
| LTCT7217 | Fixture, Pressure Test Bearing Support Assy. | 1 | |
| LTCT7493-01 | Fixture, Test, Pressure, No. 4/5 Bearing | 1 | |
| LTCT7508-01 | Fixture, No. 2 Bearing Package Pressure Check | 1 | |
| LTCT7902-01 | Torque Fixture, Compressor Rotor Shaft | 1 | |
| LTCT7950-01 | Fixture, Test, Pressure | 1 | |
| M21802 | Compression Fixture | 8 | |
| M21836 | Compression Fixture | 2 | |
| M56954A0000-01 | LEE PRESS IN FIXTURE | 1 | |
| M57864A0000-01 | PRESS IN FIXTURE | 1 | |
| M58246A0000-01 | PRESS IN FIXTURE | 1 | |
| M58331A0000-01 | PRESS IN FIXTURE | 1 | |
| M58420A0000-01 | PRESS IN FIXTURE | 1 | |
| M58421A0000-01 | PRESS OUT FIXTURE | 1 | |
| M58568A0000-01 | PRESS IN FIXTURE | 1 | |
| M58569A0000-01 | PRESS IN FIXTURE | 1 | |
| M58598A0000-01 | PRESS IN FIXTURE | 1 | |
| M58599A0000-01 | PRESS OUT FIXTURE | 1 | |
| M59403A0000-01 | PRESS-OUT FIXTURE | 1 | |
| OU132319 | Compression Fixture | 1 | |
| PR 135 | BEARING ASSEMBLING PRESS-IN FIXTURE | 1 | |
| PR135 | BEARING ASSEMBLING PRESS-IN FIXTURE | 1 | |
| PS10352 | BEARING PRESS FIXTURE | 1 | |
| PS10518 | BEARING PRESS FIXTURE | 1 | |
| PWA 12812 | Fixture Compr.rear bearing seal air pressure tube | 1 | |
| PWA 25104 | HYD. PRESS FIXTURE | 2 | |
| PWA102120 | INTERMEDIATE PRESSURE TUBE REMOVAL FIXTURE | 1 | |
| PWA26113 | FIXTURE - #1 SEAL SUPPORT PRESSURE TEST_[PWA26113] | 1 | |
| PWC 70376 | PRESSURE TEST FIXTURE | 4 | |
| PWC30059 | FIXTURE, COMPRESSOR STUBSHAFT | 4 | |
| PWC30128-8 | FIXTURE, COMPRESSOR ROTOR BLADELENGTH GAGE | 2 | |
| PWC30405 | Fixture Press (HSI) | 8 | |
| PWC30420 | HOLDING FIXTURE, COMPRESSOR ROTOR ASSEMBLY | 1 | |
| PWC30859 | press. test fixture plate | 4 | |
| PWC30872 | FIXTURE, OIL PRESSURE RELIEF VALVE | 1 | |
| PWC34405 | FIXTURE-PRESSURE | 8 | |
| PWC37351 | FIXTURE, ALIGNING HIGH PRESSURE DISK AND COVERS | 6 | |
| PWC37437 | Pressure test fixture | 1 | |
| PWC37878 | Pressure test fixture | 1 | |
| PWC37879 | Pressure test fixture | 1 | |
| PWC37924 | PRESSURE TEST FIXTURE. | 2 | |
| PWC38101 | FIXTURE, HOLDING, LOW PRESSURE VANE RING SEAL MACHINING | 2 | |
| PWC38428 | FIXTURE, HIGH PRESSURE TURBINE BLADES GRINDING | 1 | |
| PWC48067 | COMPRESSOR WASH FIXTURE | 3 | |
| PWC50001 | PRESS TEST FIXTURE | 2 | |
| PWC50353 | PRESS FIXTURE/GEARBOX | 1 | |
| PWC56574 | FIXTURE PRESS WASH | 1 | |
| PWC56827 | FIXTURE: TEST,PRESSURE,ST, | 2 | |
| PWC56827 | FIXTURE, PRESSURE TEST | 2 | |
| PWC57508 | Pressure test fixture | 1 | |
| PWC62282 | COMPRESSOR WASH FIXTURE | 3 | |
| PWC62943 | COMPRESSOR WASH FIXTURE | 4 | |
| PWC64605 | MAIN OIL PRESSURE ADJUSTMENT FIXTURE | 3 | |
| PWC64658 | Locating Fixture Compressor Turbine Disc | 1 | |
| PWC69875 | TIP WASH FIXTURE COMPRESSOR WASH | 1 | |
| PWC70367 | FIXTURE, PRESSURE | 3 | |
| PWC70376 | Fixture Pressure | 4 | |
| PWC71776 | Fixture Holding Compressor | 3 | |
| PWC72025 | PRESSURE FLUSH FIXTURE | 3 | |
| PWC72107 | COMPRESSOR TURBINE GRINDING FIXTURE | 3 | |
| PWC72324 | Fixture (Pressure Leak Test) | 4 | |
| PWC72331 | FIXTURE PRESSURE TEST | 1 | |
| PWC72720 | FIXTURE PRESSURE TEST | 4 | |
| PWC72898 | LIFTING FIXTURE COMPRESSOR | 1 | |
| RB0006-809-00671 | Arbor Press Fixture Tail Rotor Gearbox Housing | 1 | |
| RB23002210 | Compressor Rotor Balance Correction Fixture | 2 | |
| RB23006302 | Fixture, Pressure Test, Power Turbine Rotor | 2 | |
| RB23006303 | Fixture, Pressure.Test, Power Turbine Rotor | 1 | |
| RB23033026 | Nut, Clamp, Compressor Rotor Assembly Fixture | 1 | |
| RB23033028 | Fixture-Checking-Compressor Rotor Tie Bolt Stretch | 1 | |
| RB23033029 | Fixture-Alignment-Compressor Rotor Frt | 1 | |
| RB23033036 | Fixture-Separating Compressor Rotor | 1 | |
| RB23034393 | Fixture-Alignment Compressor Shroud | 1 | |
| RB23034394 | Fixture-Retaining Compressor Rotor Balance | 1 | |
| RB23055347 | Fixture-Inspection Frt. Compressor Support Assembly | 2 | |
| RB6795594 | Fixture-Assembly, Compressor Rotor | 2 | |
| RB6795966 | COMPRESSOR DISASEMBLY FIXTURE | 2 | |
| RB6872162 | Sump Assembly Pressure Test Fixture | 1 | |
| RB6872534 | Aligning Compressor Rotor Fixture | 2 | |
| RB6872880 | Compressor Mounting Inserts Checking Fixture | 2 | |
| RB6873066 | Compressor Axis Alignment Fixture | 2 | |
| RB6893360 | Compressor Fixture Assembly | 2 | |
| RB6893383 | Fixture, Compression Axis Alignment | 2 | |
| RB6893737 | FIXTURE SELECTOR, REAR COMPRESSOR SEAL VENT ORIFICE | 2 | |
| RB6895994 | Compressor Discharge Air Tube Pressure Test Fixture | 1 | |
| RB6895995-3 | Fixture-Alignment Compressor Rotor (2 Piece) | 1 | |
| RB6895995-4 | Fixture-Alignment Compressor Rotor (2 Piece) | 2 | |
| SC14052G04 | FIXTURE, LIFT AND TURN - LOW PRESSURE TURBINE - HORIZONTAL | 1 | |
| SCF2-8189 | FIXTURE-COMPRESSION,SPRING | 1 | |
| SK13389 | MACHINING FIXTURE SHROUD COMPRESSOR APU | 1 | |
| SPL-1774 | FIXTURE, BRAKE PEDAL, PRESSURE | 1 | |
| SPL-8420 | PRESS RELIEF VALVE - CHECK FIXTURE | 1 | |
| ST-508-080 | PM ARBOR PRESS FIXTURE | 1 | |
| ST-508-080 PM | ARBOR PRESS FIXTURE | 1 | |
| ST-508-080PM | ARBOR PRESS FIXTURE | 1 | |
| ST71212 | Fixture Arbor Press | 2 | |
| ST93227 | Fixture, Pressure Test | 1 | |
| STD1850.247-004 | FIXTURE ARBOR PRESS, AVIM | 1 | |
| T 25758 | Fixture, Pressurizing Valve leakage Test | 1 | |
| T-25758 | FIXTURE, TEST PRESSURIZING VALVE LEAKAGE | 1 | |
| T-412380 | SPRING COMPRESSOR FIXTURE | 1 | |
| T-66881 | Test Fixture, Housing Negative Pressure Test | 1 | |
| T-66999 | Test Fixture, Housing Positive Pressure Test | 1 | |
| T-68970 | TEST FIXTURE, PRESSURE | 1 | |
| T06762-1 | FIXTURE OVERPRESSURE | 3 | |
| T147265-1 | PRESSURE TEST FIXTURE | 1 | |
| T25758 | Fixture, Test pressurizing Valve Leakage | 1 | |
| T27257 | FIXTURE - DEPRESSING | 1 | |
| T42315-60SC1 | SPRING COMPRESSION FIXTURE | 1 | |
| T42315-72SC1-101 | SPRING COMPRESSOR, SHEAVE CROWDER, 1 EA • T42315-60SC1, SPRING COMPRESSION FIXTURE, 1 EA | 1 | |
| T69588 | PIN PRESSING FIXTURE, P | 1 | |
| T743806 | BEARING PRESS FIXTURE | 1 | |
| TA04998 | Pressure Fixture | 1 | |
| TF6592 | BLOCK (HIGH PRESSURE CHECK VALVE) TEST FIXTURE | 1 | |
| TF65921 | BLOCK (HIGH PRESSURE CHECK VALVE) TEST FIXTURE | 1 | |
| TM20H28502 | FUEL TANK PRESSURE MEASUREMENT FIXTURE | 1 | |
| TO 6762-1 | FIXTURE , OVER PRESSURE | 3 | |
| TO6762-1 | OVER PRESSURE FIXTURE | 3 | |
| TO6762-1/-3 | OVERPRESSURE FIXTURE | 1 | |
| TO6762-2 | FIXTURE OVER PRESSURE ( CMM #- 25-61-41 ) | 1 | |
| TO6762-3 | FIXTURE OVER PRESSURE ( CMM #- 25-61-39 ) | 1 | |
| TO6762-4 | FIXTURE, OVERPRESSURE | 1 | |
| TO6762-5 | FIXTURE, OVERPRESSURE | 1 | |
| TO6762-6 | FIXTURE, OVERPRESSURE | 1 | |
| TO6762-7 | FIXTURE OVERPRESSURE (POST S.B. A321 005-25-15) | 1 | |
| TSJ65B91267 | TEST FIXTURE - ENGINE PRESSURE RATIO (EPR) SYSTEM Pt2 PROBE | 1 | |
| U21905200 | LOW-PRESSURE TEST FIXTURE | 1 | |
| U541483-T3 | PRESSURE DROP TEST FIXTURE | 1 | |
| U541515-T2A | PRESSURE TEST FIXTURE | 1 | |
| U541515-T2B | PRESSURE TEST FIXTURE | 1 | |
| VR-L11-0010 | PRESSING FIXTURE | 1 | |
| WT-62814 | TEST FIXTURE BACK PRESSURE REGULATOR | 1 | |
| lC600l | FIXTURE, HOLDING- LOW PRESSURE TURBINE ROTOR FORWA | 1 | |
| lC6065 | FIXTURE, CONCENTRICITY CHECK-LOW PRESS. TURBINE ROTOR | 1 | |
| lC6l93 | FIXTURE SET, MACHINING - FRONT COMPRESSOR STATOR | 1 | |
| lC8039 | FIXTURE, RAISE & SUPPORT- UPPER COMPRESSOR CASE | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
