| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 98S57105017000 | PR TOOL | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 160200-9Z003 | LH SEATPAN SPRING INSTALL TOOL | 12 | |
| DAPT60-0126-00 | TOOL-PROP PITCH CHANGE (BLADE BAT) | 8 | |
| 3-5290-T22 | SPRING COMPRESSION TOOL | 1 | |
| (CALIB) 201137-CA | PROPELLER LIFTER -PERFORM MAGNETIC PARTICLE INSPECTION OF STRUCTURAL COMPONENTS, WELDING JOINTS, CLAMPING PINS, SHACKLES, AND PINS OF THE EQUIPMENT -PERFORM LOAD TESTS, CERTIFICATION OF ALL TOOL PINS, CHANGE OF WHEELS TO THE PACKAGING BOXES -ISSUE A TECH | 1 | |
| (CALIB) 20113A | CHECK TOOL PROXIMITY SENSOR | 1 | |
| (CALIB) 201802-CA | PROPELLER BALANCING TOOL SET | 1 | |
| (CALIB) 856A1717P01 | TOOL KIT, PRESERVATION (CALIBRATION) | 1 | |
| (CALIB) 97F52001000020 | CHECKTL CHECK TOOL-PROXIMITY SENSOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97F57508704000 | RPRTOOL REPAIR-TOOL,FAIRING 3 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97F57508704001 | RPRTOOL REPAIR-TOOL,FAIRING 2 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97F57508704003 | RPRTOOL REPAIR-TOOL,FAIRING 4RH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27508375000 | REMINST REM.-INST. TOOL - SPRING UNIT, (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27508679000 | TOOL TOOL-R I,SPRING VANE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D28108658000 | ACTPRSS TOOL-PRESSURE TEST,ACT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D29003501000 | FILLUNIT FILL UNIT-AIR PRESSURIZING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D35208729000 | TOOL-DPRSS,TEST-O2 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D35208729001 | TOOL-DPRSS,TEST-O2 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32104021000 | TOOL TOOL - COMPRESSION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32104021001 | TOOL TOOL - COMPRESSION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F34103003000 | FLUSHING TOOL-PITOT PROBE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F55109006000 | REMINST REM.-INST. TOOL, THS APRON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L07104005000 | TOOL JACKING TOOL ASSEMBLY PRIMARY S (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98S26005000000 | CARGO COMPT. AIR PROOF MEASUREMENT TOOL | 1 | |
| (CALIB) 98S27005016000 | TOOL CABLE TENSION REGULATOR pre-mod.2634 | 1 | |
| (CALIB) 98S27105002000 | AILERON BLOCKING TOOL (SPRG TAB) | 1 | |
| (CALIB) 98S32005006000 | TOOL TO COMPRESS NLG SHOCK ABSORBER | 1 | |
| (CALIB) 98S32405000000 | BRAKE PRESS BRK SYS PURGING TOOL-20028A | 1 | |
| (CALIB) 98S61003006000 | PROPELLER BALANCER TOOL | 1 | |
| (CALIB) 98S61005000000 | PROPELLER CONTROL UNIT SETTING TOOL | 1 | |
| (CALIB) 98S71003000002 | FIXTURE ENG/PROP R/I -PERFORM MAGNETIC PARTICLE INSPECTION OF STRUCTURAL COMPONENTS, WELDING JOINTS, CLAMPING PINS, SHACKLES, AND PINS OF THE EQUIPMENT -PERFORM LOAD TESTS, CERTIFICATION OF ALL TOOL PINS, CHANGE OF WHEELS TO THE PACKAGING BOXES -ISSUE A | 1 | |
| (CALIB) AIT320008-003-01 | Compression Tool - MLG A330/A340-200/300 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AIT320008-003-02 | Compression Tool - MLG A340-300B (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AIT320008-003-03 | Compression Tool - MLG A340-500/600 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AIT320008-003-04 | TOOL TOOL-COMPRESSION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AIT320008-003-4 | TOOL-COMPRESSION (CALIBRATION) | 1 | |
| (CALIB) AIT320020-001 | BOGIE COMPRESSION TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GSE56111 | TOOL TOOL, COMPRESSION - SHOCK STRUT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J47309 | COMPRESSION TOOL (CALIBRATION) | 1 | |
| (CALIB) JMPCFM56D4462 | TOOL-PROBE-ENGINE WASHING RIG (B737-700/800/900, CFM56-7) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) R21820000 | SPRING TENSION TOOL | 1 | |
| (CALIB) SM705 | DECOMPRESSOR FROM JMP/CFM56/D/4777/C200 ENGINE CLEANOUT TOOL (CALIBRATION) | 1 | |
| 0-1000PSI | PRESSURE GAUGE TOOL | 1 | |
| 0-10PSIX75MM | TOOL - PRESSURE GAUGE | 1 | |
| 0-15000 PSI | PRESSURE GAUGE (TOOL) | 1 | |
| 0-15000PSI | PRESSURE GAUGE (TOOL) | 1 | |
| 0-160PSI | PRESSURE GAUGE TOOL | 1 | |
| 0-170PSI | PRESSURE GAUGE TOOL | 1 | |
| 0-3000PSIX63MM | TOOL - GAUGE PRESSURE 0-3000 PSI | 1 | |
| 0-300PSI | PRESSURE GAUGE 0-300 PSI TOOL | 1 | |
| 0-300PSIX63MM | TOOL - PRESSURE GAUGE | 1 | |
| 0-4000PSIX100MM | TOOL - PRESSURE GAUGE | 1 | |
| 0-5000PSI | PRESSURE GAUGE TOOL | 1 | |
| 0-6000PSI | PRESSURE GAUGE TOOL | 1 | |
| 0-90PSI | PRESSURE GAUGE TOOL | 1 | |
| 001901-001-00 | TIGHTENING-FOOLPROOF CONNECTION TOOL | 8 | |
| 0061BE | POINTING TOOL-VANE PROTRACTO | 5 | |
| 0061R07846 | Bearing Press Tool | 1 | |
| 0061R07846-1 | Staking Press Tool | 1 | |
| 0061R07846-1PM | STAKING PRESS TOOL | 1 | |
| 0061R07846PM | BEARING PRESS TOOL | 1 | |
| 007325 | PRESSURE LEAK TEST TOOL | 1 | |
| 0110E102307-31 | TOOL PRESSING | 1 | |
| 0110E102307-32 | TOOL PRESSING | 1 | |
| 0110E102307-33 | TOOL PRESSING | 1 | |
| 0110E102307-34 | TOOL PRESSING ASSEMBLY | 1 | |
| 0110E102307-35 | TOOL PRESSING DISASSEMBLY | 1 | |
| 0110E102307-4 | TOOL, PRESSING ASSEMBLY | 1 | |
| 02-9097 | Replacement Feed & Roll Cutters (Rivet capacity aluminum: Feed Cutters) (For tool: 7LR to 8PR) (Add to cart: Add To Cart) | 1 | |
| 02-9098 | Replacement Feed & Roll Cutters (Rivet capacity aluminum: Feed Cutters) (For tool: 7LR to 8PR) (Add to cart: Add To Cart) (Rivet capacity aluminum: Roll Cutters) (For tool: 7LR to 8PR) (Add to cart: Add To Cart) | 1 | |
| 02-9101 | Replacement Feed & Roll Cutters (Rivet capacity aluminum: Feed Cutters) (For tool: 7LR to 8PR) (Add to cart: Add To Cart) (Rivet capacity aluminum: Roll Cutters) (For tool: 7LR to 8PR) (Add to cart: Add To Cart) (Rivet capacity aluminum: Roll Cutters) (Fo | 1 | |
| 02-9279 | Replacement Feed & Roll Cutters (Rivet capacity aluminum: Feed Cutters) (For tool: 7LR to 8PR) (Add to cart: Add To Cart) (Rivet capacity aluminum: Roll Cutters) (For tool: 7LR to 8PR) (Add to cart: Add To Cart) (Rivet capacity aluminum: Roll Cutters) (Fo | 1 | |
| 02-9280 | Replacement Feed & Roll Cutters (Rivet capacity aluminum: Feed Cutters) (For tool: 7LR to 8PR) (Add to cart: Add To Cart) (Rivet capacity aluminum: Roll Cutters) (For tool: 7LR to 8PR) (Add to cart: Add To Cart) (Rivet capacity aluminum: Roll Cutters) (Fo | 1 | |
| 02-9914 | Replacement Feed & Roll Cutters (Rivet capacity aluminum: Feed Cutters) (For tool: 7LR to 8PR) (Add to cart: Add To Cart) (Rivet capacity aluminum: Roll Cutters) (For tool: 7LR to 8PR) (Add to cart: Add To Cart) (Rivet capacity aluminum: Roll Cutters) (Fo | 1 | |
| 02-9915 | Replacement Feed & Roll Cutters (Rivet capacity aluminum: Feed Cutters) (For tool: 7LR to 8PR) (Add to cart: Add To Cart) (Rivet capacity aluminum: Roll Cutters) (For tool: 7LR to 8PR) (Add to cart: Add To Cart) (Rivet capacity aluminum: Roll Cutters) (Fo | 1 | |
| 02N65739 | STB-06-LA PROGRAMMING TOOL | 3 | |
| 03N60662 | ENCODING PROGRAMMING TOOL FOR BALISE ELTA | 8 | |
| 03N60662C | ENCODER PROGRAMMING TOOL | 1 | |
| 04-256-F | USATCO 37° Single & Double Lap Flaring Tool Kit (Includes 1: Flaring Tool, Protrusion Gauge) (Add to cart: Add To Cart) | 2 | |
| 04Y0008-001 | TOOL-THRUST REVERSER PRIMARY LOCK DISENGAGEMENT | 9 | |
| 05-06806 | DUC ADJUSTING TOOL - PROPELLER | 1 | |
| 05-1-9231-3-600 | PRESURE TEST TOOL | 1 | |
| 050-1000-06C31-B | 787 TIRE PRESURE SENSOR SKT TOOL | 5 | |
| 050-1000-06C31B | 787 TIRE PRESURE SENSOR SKT TOOL | 5 | |
| 06-5009-6500 | ENGINE RUST PREVENTIVE TOOL | 2 | |
| 06-5496-08 | TOOL - MEDIA ELTN SIS ENTREPRENEUR CAB AERO | 1 | |
| 0781-0543 | TOOL - CUSHIONED PRESSURE REGULATOR | 1 | |
| 0781-1448 | TOOL - TIRE HIGH PRESSURE REGULATOR | 1 | |
| 08-0702-6000 | Tool, Prop Pitch | 6 | |
| 08-0703-6000 | Tool, Prop Seal | 4 | |
| 08-0704-4000 | Tool, Prop Torque Adapt | 4 | |
| 08-0705-6000 | Tool, Prop Torque Removal | 6 | |
| 08-13774 | TCM 6 CYLINDER SPRING COMPRESSOR TOOL | 1 | |
| 08-8024-6000 | Tool, Prop Pitch Change | 2 | |
| 08-8056-6000 | Tool, Prop Seal Removal | 6 | |
| 08-8064-4000 | Tool, Prop Torque Adapt. | 5 | |
| 08-8077-6000 | Tool,Prop Torque Motor Rem | 2 | |
| 09P2375 | EPROM TOOL | 1 | |
| 0S22457 | PRESSING TOOL | 1 | |
| 0S22458 | PRESSING TOOL | 1 | |
| 0S22829 | TOOL COMPRESSION | 1 | |
| 0S22975 | DUMP VALVE PRESSURIZATION VALVE BLOCK TOOL EMB-120 | 1 | |
| 0U 145018 | SPRING WASHER FITTING TOOL | 1 | |
| 0U 148561 | PROTECTIVE TOOL | 1 | |
| 0U144949 | Protection Tool | 2 | |
| 0U145018 | SPRING-WASHER FITTING TOOL | 1 | |
| 0U147358 | TOOL-COMPRESSION | 1 | |
| 0U147363 | COMPRESSION TOOL | 1 | |
| 0U147825 | PRECASTING TOOL | 1 | |
| 0U190662 | LEAK PROOFNESS HOUSING TOOL | 1 | |
| 0U190663 | PROFFNESS TEST ROLLER RACE TOOL | 1 | |
| 0U190844 | BRAKE HYDRAULIC PRESSURE RELEASE TOOL | 29 | |
| 0U191559-210 | LOW PRESSURE TEST TOOL | 1 | |
| 0U191562 | TEST PRESSURE TOOL | 1 | |
| 0U191807 | PRESSURE TOOL | 1 | |
| 0U191808 | PRESSURE TOOL | 1 | |
| 0U300098 | COMPRESSION TOOL | 1 | |
| 0U300679 | SPRING INSTALLATION TOOL | 1 | |
| 0U300743 | COMPRESSION TOOL | 1 | |
| 0U301141 | COMPRESSION TOOL | 1 | |
| 0U301172 | PROTECTION TOOL | 1 | |
| 0U301271 | COMPRESSION TOOL | 1 | |
| 0U301371 | PROTECTION TOOL | 1 | |
| 0UT168 | SPRING LOADING TOOL | 1 | |
| 1-6390 -A | TOOL - SEALANT REMOVAL, BAC5000, PSD 6-184 APPROVED | 2 | |
| 1-6390-A | TOOL - SEALANT REMOVAL, BAC5000, PSD 6-184 APPROVE | 2 | |
| 1-6390-A 10810 23450 DAD5013 | TOOL-SEALANT REMOVAL,BAC5000,PSD 6-814 APPROVED | 1 | |
| 1-6390A | TOOL - SEALANT REMOVAL, BAC5000, PSD 6-184 APPROVED | 2 | |
| 1/4 UNF | PRE-WIND TANGLESS TOOL | 1 | |
| 10 PSI | PRESSURE GAUGE TOOL | 1 | |
| 10-SGE4110 | PRESSURE GAUGE TOOL | 1 | |
| 10/32 UNF | PRE-WIND TANGLESS TOOL | 1 | |
| 100-49599 | Preformed Packing Assembly Tool | 1 | |
| 100-49601 | Preformed Packing Assembly Tool | 1 | |
| 100-49601PM | PREFORMED PACKING ASSEMBLY TOOL | 1 | |
| 10000PSI | PRESSURE GAUGE TOOL | 1 | |
| 10013677-S5 8-5 | TEST TOOL, (LOW PRESSURE RELIEF TEST) | 1 | |
| 10013677-S58-5 | TEST TOOL, (LOW PRESSURE RELIEF TEST) | 1 | |
| 100PSIG | PRESSURE GAUGE TOOL | 1 | |
| 101-01175 | PROBE TOOL | 9 | |
| 1014826 | ADAPTER CYCLEAN WASH THIS TOOL IS USED TO CLEAN THE IP AND THE HP COMPRESSORS | 1 | |
| 105-14101 W18 | PRESSING-IN TOOL | 1 | |
| 105-14101 W7 | PRESSING-IN TOOL | 1 | |
| 105-14101W18 | PRESS TOOL | 1 | |
| 105-14101W18/PHP | PRESSING-IN TOOL | 1 | |
| 105-14101W7 | PRESSING-IN TOOL | 1 | |
| 105-14110 W2 | PRESSING-IN TOOL | 1 | |
| 105-14181 W2 | PRESSING-IN TOOL | 1 | |
| 105-14181 W7 | PRESSING-IN TOOL | 1 | |
| 105-21832 W1 | PRESSING-IN TOOL | 1 | |
| 105-31702W25 | PRESSING TOOL | 1 | |
| 105-31702W4 | PRESSING IN PUSHING OUT TOOL | 1 | |
| 105-42121 W4 | PRESSING-IN TOOL | 1 | |
| 105-42121 W5 | PRESSING-IN TOOL | 1 | |
| 105-42121W4 | PRESSING TOOL | 1 | |
| 105-42121W5 | PRESSING-IN TOOL | 1 | |
| 105-42124W3 | PRESSING-IN TOOL | 1 | |
| 109-3400-38-1 | AGUSTA TOOL - ADAPTORS, FREEWHEEL SPRAG CLUTCH INSTL ASSY | 1 | |
| 109-3400-38-3 | AGUSTA TOOL - ADAPTORS, FREEWHEEL SPRAG CLUTCH INSTL - BUSHING, SLEEVE | 1 | |
| 109-3400-38-5 | AGUSTA TOOL - ADAPTORS, FREEWHEEL SPRAG CLUTCH INSTL - BODY | 1 | |
| 109-3400-38-7 | AGUSTA TOOL - ADAPTORS, FREEWHEEL SPRAG CLUTCH INSTL - PULLER | 1 | |
| 109-3401-62-101 | TOOL COLLAR PROTECTION | 1 | |
| 109-3901-26-133 | AGUSTA T/R GEARBOX TOOLING - PROTECTION | 1 | |
| 109-3901-26-135 | AGUSTA T/R GEARBOX TOOLING - PROTECTION | 1 | |
| 10BAR | PRESSURE GAUGE TOOL | 1 | |
| 10F | PRESSURE BLANK TOOL | 1 | |
| 10M | PRESSURE BLANK TOOL | 1 | |
| 10M-8628 | F/A SEAT SPRING TOOL | 1 | |
| 11-10386 | TOOL, FERRULE PRESS | 1 | |
| 11-202 | PRESSING TOOL | 1 | |
| 11-6924-1 | PRESSING TOOL | 1 | |
| 11-970 | PRESSING TOOL | 1 | |
| 110111-36 | TOOL-DPRESS, TEST-O2 | 8 | |
| 1120-31547W1 | PRESSING-IN TOOL | 1 | |
| 114-1107TE | Tool, adjuster spring | 1 | |
| 114-202-1 | COMPRESSION RIVETING ANVIL TOOL | 1 | |
| 114-202-2 | COMPRESSION RIVETING PEEN TOOL | 1 | |
| 114-231 | COMPRESSION TOOL | 2 | |
| 114-231TE | Tool, adjuster spring | 1 | |
| 114-263 | PRESSURE RELIEF VALVE PENETRATION TEST TOOL | 5 | |
| 114-290 | RETURN SPRING COMPRESSION TOOL | 1 | |
| 114-291 | RETURN SPRING COMPRESSION TOOL | 2 | |
| 114-291TE | Tool, adjuster spring | 1 | |
| 114-410 | TOOLS FOR BEARING CUP REPLACEMENT PROCESS | 1 | |
| 114-416 | SHIM TOOL FOR HIGH PRESSURE LEAK TEST | 1 | |
| 114-417 | SPRING REMOVAL AND INSTALLATION TOOL | 2 | |
| 114-417TE | Tool, adjuster spring | 1 | |
| 114-485 | SPRING REMOVAL AND INSTALLATION TOOL | 1 | |
| 114160-ST | SPRING TOOL | 1 | |
| 114160659-CT | COMPRESS TOOL | 1 | |
| 11439-00 | STRAIN GAUGE PRESSURE SWITCH TEST TOOL CONTAINED IN PACK P/N 12088-00 | 1 | |
| 1159GSE50107-3 | CHECKOUT ELEVATOR ACTUATOR HARD OVER PROTECTION TOOL | 1 | |
| 1168-30ST | SPRING COMPRESSOR TOOL (3 IT) | 1 | |
| 117-11130W1 | TOOL; PUSH OUT/PRESS IN | 1 | |
| 117-15004-W6 | PRESSING TOOLS | 1 | |
| 117-15004W6 | PUSH OUT / PRESS IN TOOL | 1 | |
| 117-15004W6/PHP | PUSHING OUT/ PRESSING IN TOOL | 1 | |
| 117-30002W2 | PRESSING TOOL | 1 | |
| 117-44115W1 | PRESSING-IN TOOL | 1 | |
| 11738-TB | CRIMP TOOL, DIE SET, PRIMARY | 1 | |
| 11B36-11930 | TOOL, 16WR PLUG, PRESSURE SWITCH, A320 | 1 | |
| 11C3074 | TOOL KIT - DUMMY BOLT-COMPR DISCH PRESS SEAL/SP - STG 6-10 | 1 | |
| 11C3964 | TOOL SET, PROTECTION-DESPATCH AGBX | 1 | |
| 11C4552P02 | 787 TOOL KIT - ENGINE PRESERVATION, GENX-1B AND -2B | 1 | |
| 11C4566 | MANIFOLD PRESSURE CHECK TOOL SUPERCEDED BY G04 | 1 | |
| 11C4566G04 | MANIFOLD PRESSURE CHECK TOOL | 1 | |
| 11C4811 | TOOL KIT, ADAPTER-ELECTRONIC PROTRACTOR VSV | 1 | |
| 11C4811G01 | TOOL KIT, ADAPTER-ELECTRONIC PROTRACTOR VSV | 1 | |
| 11C4812 | TOOL KIT-ELECTRONIC PROTRACTOR, IGV | 1 | |
| 11C4812G01 | TOOL KIT-ELECTRONIC PROTRACTOR, IGV | 1 | |
| 11C4831G01 | SUMP CAVITY PRESSURE CHECK TOOL | 1 | |
| 12-02560 | NICOPRESS SWAG TOOL 64-CGMP | 1 | |
| 12-43-04-004 | REAR BRUSH SPREADING TOOL | 1 | |
| 12088-00 | STRAIN GAUGE PRESSURE SWITCH TEST TOOL TO-26-002 | 1 | |
| 12091-00 | STRAIN GAUGE PRESSURE SWITCH TEST TOOL TO-26-002 | 1 | |
| 1213875-1 | AUTOPRESS CRIMPING TOOL K | 3 | |
| 1213875-2 | AUTOPRESS CRIMPING TOOL KIT | 1 | |
| 1222LMT | RETAINING SPRING TOOL | 1 | |
| 123T18 | PROBE ROTATING TOOL | 1 | |
| 12F | PRESSURE BLANK TOOL | 1 | |
| 12M | PRESSURE BLANK TOOL | 1 | |
| 13409-12467 | JIFFY® Pistol Grip "Pancake" Installation Tool for Hi-Lok® Style Fasteners - NEW & IMPROVED! | 1 | |
| 1375307-1 | PRO TOOL KIT;& D914S APPL TOOL | 1 | |
| 138-534100 | TOOL-ESPRESSO SERVICING | 1 | |
| 14-6805-6010 | GAUGE - PRESSURE, 0-3000 PSIG (0-20685 KPA) / SHOCK STRUT SERVICE TOOL | 20 | |
| 14-6806-6011 | TYRE PRESSURE GAUGE TOOL | 23 | |
| 14-6870-6000 | Tool, Proximity Adjustment | 2 | |
| 145PSI | PRESSURE GAUGE TOOL | 1 | |
| 148274-0-4501 | Press Tool | 1 | |
| 148274-0-4501 PM | PRESS TOOL | 1 | |
| 1490748-1 | 1" COMPRESSION TOOL | 2 | |
| 1490749-1 | 1 1/2" COMPRESSION TOOL | 4 | |
| 14935B | PRETENTION TOOL | 1 | |
| 150979-0-200 | Pin Press Tool | 1 | |
| 150979-0-200 PM | PIN PRESS TOOL | 1 | |
| 150PSI | PRESSURE GAUGE TOOL | 1 | |
| 151720-0-2001 | Tool,Seal Press | 1 | |
| 151720-0-2001 PM | TOOL, SEAL PRESS | 1 | |
| 151720-0-2002 | Press Tool For 148269 | 1 | |
| 151720-0-2002 PM | PRESS TOOL FOR 148269 | 1 | |
| 151720-0-2003 | Press Tool For 148270 | 1 | |
| 151720-0-2003PM | PRESS TOOL FOR 148270 | 1 | |
| 151720-0-2004 | Press Tool For 148271 | 1 | |
| 151720-0-2004 PM | PRESS TOOL FOR 148271 | 1 | |
| 151720-0-2007 | PRESS TOOL | 1 | |
| 151720-0-2007 PM | PRESS TOOL | 1 | |
| 151TA7 | HYD COMPRESSION TOOL | 1 | |
| 1544440AT5-101 | PRESSURE REDUCER VALVE REMOVAL TOOL | 1 | |
| 1583248-1 | TOOL;REMOVAL;HMZD CHICLET;4 PR | 1 | |
| 1583249-1 | TOOL;REMOVAL;HMZD CHICLET;2PR. | 1 | |
| 15PSI1 | PRESSURE GAUGE TOOL | 1 | |
| 160200-9Z000 | RH SEATPAN SPRING INSTALL TOOL | 12 | |
| 160200-9Z003 | LH SEATPAN SPRING INSTALL TOOL | 12 | |
| 1602QO-9ZOOO | SPRING TOOL, L/H F/A SEAT | 1 | |
| 1604T100 | INSTALLATION TOOL-SNAPRING | 1 | |
| 160PSI | PRESS GAUGE TOOL | 1 | |
| 160PSIG | AIR PRESSURE GAUGE TOOL | 1 | |
| 1610000F18 | COMPRESSION TOOL | 1 | |
| 16A13229L1-1 | TOOL WOW SWITCH DEPRESSION. | 1 | |
| 16F | PRESSURE BLANK TOOL | 1 | |
| 16M | PRESSURE BLANK TOOL | 1 | |
| 17-3233-D1178-401 | LH MLG BUNGEE SPRING TOOL & WRENCH | 1 | |
| 17-3233-D1178-402 | RH MLG BUNGEE SPRING TOOL & WRENCH | 1 | |
| 170-09700-709-32H1 | PROBE ADJUSTMENT TOOL | 1 | |
| 17311-0-2000 | Bearing Press Tool | 1 | |
| 17311-0-2001 | Bearing Press Tool | 1 | |
| 179-618-4 | O-RING COMPRESSION TOOL | 1 | |
| 179-618-4 | O-RING COMPRESSION TOOL | 1 | |
| 17G110501-503 | TOOL KIT - PROXIMITY SENSOR TEST | 1 | |
| 17T124 | TOOL - PRESSURE PAD ALIGNMENT | 1 | |
| 18C1175 | TOOL KIT, ELECTRONIC - IGV PROTRACTOR | 1 | |
| 18C1176 | TOOL KIT, ELECTRONIC - VSV PROTRACTOR | 1 | |
| 190-T001-401 | PROXIMITY SENSOR ADJUSTING TOOL | 1 | |
| 1938155-1 | HARNESS GPRB2 VERT TOOL | 1 | |
| 1946-1018-ND | PREP TOOL FOR LMR-240 | 1 | |
| 196-T0052-401 | TOOL, SPRING MOUNT-ING - MLG/NLG | 1 | |
| 196T08450-401 | TOOL, SPRING COM-PRESSOR - OSM | 1 | |
| 199-18 | PREFORMED PACKING EXTRACTION TOOL SET | 4 | |
| 19C0903G01 | ADAPTER SET PRESSURE TEST/RIG - VIGV, VBV, VSV SPECIAL TOOL FOR VARIBLE BYPASS VALVE (VBV) REPLACEMENT AND CHECK | 1 | |
| 1AF26 | PROTO 3/4 DR SOCKET SET TOOL | 1 | |
| 1C5906 | TOOL SET, INSP-LOW PRESSURE TURBINE ROTOR BLADES | 1 | |
| 1C5906 REV H | TOOL SET, INSPECTION-LOW PRESSURE TURBINE ROTOR BLADES | 1 | |
| 1C8052 | TOOL STARTING & STRAIGHTENING RTNR COMPR. RTR BLAD | 1 | |
| 1C8052 REV B | TOOL STARTING & STRAIGHTENING RTNR COMPR. RTR BLADE, ST | 1 | |
| 1C8052G02 | TOOL, INSTALL - COMPRESSOR ROTOR BLADE, STAGE 1 | 1 | |
| 1C8069G04 | HIGH PRESSURE TURBINE (HPT) TORQUE TOOL LIFTER HORIZONTAL BRAND (GE) | 1 | |
| 1C8312G01 | TOOL SET, REMOVE HIGH PRESSURE COMPRESSOR ROTOR STAGE 1 AND 2 RETAINING RING | 1 | |
| 1C9317G01 | ADAPTER SUPPORT/LIFT - LPC SPECIAL TOOL (LIFTING TOOL) FOR REPLACEMENT LOW PRESSURE COMPRESSOR (LPC) | 1 | |
| 1C9393G01 | ADAPTER SET PRESSURE TEST/RIG - VIGV, VBV, VSV SPECIAL TOOL FOR PRESSURE TEST | 2 | |
| 1C9427G01 | TOOL, REMOVE/INSTALL. PREMIXER | 1 | |
| 1C9429 | TOOL SET, REMOVE- COMPR REAR FRAME AFT CASE | 1 | |
| 1C9458 | TOOL KIT - ADAPTER-ELECTRONIC PROTRACTOR - VSV | 1 | |
| 1C9458G01 | TOOL KIT - ADAPTER-ELECTRONIC PROTRACTOR - VSV | 1 | |
| 1NH20 | PRESSURE GAUGE TOOL | 1 | |
| 1PK-635 | PRECISION ELECTRONICS TOOL KIT | 1 | |
| 1X53176709 | FREE WHEEL SEAL TO TAKE OUT TOOL/PRESSER | 1 | |
| 1X54176875 | PRESS TOOL | 1 | |
| 2-10890 | SPRING COMPRESSION TOOL | 1 | |
| 2-4569 | TOOL FOR PRESSURE RELEASE PLUG | 1 | |
| 2-5BAR | PRESSURE GAUGE TOOL | 1 | |
| 2.069.69-0001 | PROBE TOOL | 1 | |
| 2000PSI | PRESSURE GAUGE TOOL | 1 | |
| 201202-CA | BRAKE PRESSURE GAUGE (COMPLETE TOOL) | 2 | |
| 2022480-TA | TOOL PROTACTOR ADAPTER (2 IT) | 1 | |
| 2024215-2 | APU DMM PROGRAMMING TOOL | 1 | |
| 2024215-ALL | APU DMM PROGRAMMING TOOL | 1 | |
| 2024226-1 | SPRING COMPRESSION TOOL | 1 | |
| 2024839-1 | Press Tool | 1 | |
| 2024963-1 | SPRING INSTALLATION TOOL | 1 | |
| 2025601-1 | SEAL SLEEVE COMPRESSION TOOL | 1 | |
| 204-040-003-23-PAT-ZD | PRESSING TOOL | 1 | |
| 2040 LAPB | Propeller Shop Tool Set | 1 | |
| 209368-0 | PRESSURE COUPLING TOOL | 1 | |
| 20DAN | SPRING BALANCE 20DAN (48LBF) TOOL | 1 | |
| 21-1EY475AB | CARGO DOOR SPRING TOOL | 1 | |
| 211C223-175CC1 | Spring Adjust Tool | 1 | |
| 212-124 | TEMPRETURE INDICATOR TOOL | 1 | |
| 212-240-002-101 | COMPRESSION TOOL SET, KAFLEX D/S | 1 | |
| 21202A | INJECTION TOOL PR | 1 | |
| 21774T1 | PRESSING TOOL | 1 | |
| 21C6072G01 | DEPRESSING TOOL | 1 | |
| 22101-R817370 | LEAD WOOL COMPRESSION TOOL | 1 | |
| 2227000F115 | PRESSING TOOL SUMMINE LEAVE BEARING | 1 | |
| 2227000F126 | PRESSING TOOL, SPHERICAL BEARING | 1 | |
| 311 | Tool - Sealant Removal, BAC5000, PSD 6-184 Approved | 1 | |
| 461 | PRESSURE SPRAYER SOLAR TOOL | 1 | |
| 556 | XZT AIRCRAFT AVIATION TOOLS SCHRADER,HIGH PRESSURE STRUCT NO AIR LOSS COUPLER 556,COUPLINGS TO FILL | 3 | |
| 895 | SPRING BALANCE TOOL | 1 | |
| 1823 | Sioux Tool - Replacement Blades for Reciprocating Saw - Description: Bi-Metal Blade, 18TPI | 1 | |
| 1824 | Sioux Tool - Replacement Blades for Reciprocating Saw - Description: Bi-Metal Blade, 24TPI | 1 | |
| 1825 | Sioux Tool - Replacement Blades for Reciprocating Saw - Description: Bi-Metal Blade, 32TPI | 1 | |
| 2122 | RESERVOIR PRESSURE TEST SET TOOL | 9 | |
| 2559 | SPRING LOATED EXTRACTION TOOL | 3 | |
| 3602 | VALVE SPRING COMPRESSOR TOOL | 1 | |
| 7251 | PRESSURE DIFFERENTIAL TESTING TOOL | 1 | |
| 7551 | HELICOIL HAND INSERTING TOOL, INSERTING PREWINDER | 1 | |
| 8700 | ELT REPROGRAMMING TOOL ARTEX 8700 | 11 | |
| 8910 | 0-100LB SPRING BALANCE TOOL | 1 | |
| 10810 | Tool - Sealant Removal, BAC5000, PSD 6-184 Approved | 1 | |
| 11054 | ORAL/PRV VALVE REMOVAL TOOL | 1 | |
| 11738 | CRIMP TOOL, DIE SET, PRIMARY | 6 | |
| 11831 | TOOL: AIR PRESSURE | 1 | |
| 14807 | PRETENSIONING TOOL | 1 | |
| 16085 | METAL PRY TOOL | SKIN WEDGE - 3 PIECE SET | 2 | |
| 23660 | TIRE PRESS BLEED TOOL SMALL | 1 | |
| 23661 | TIRE PRESS BLEED TOOL BIG | 1 | |
| 25164 | PRESSURE GAUGE TOOL | 1 | |
| 32447 | DIP STICK (SD-5 AIR COND. COMPRESSOR TOOL) | 3 | |
| 32448 | ANGLE GAUGE (SD-5 AIR COND. COMPRESSOR TOOL) (MODEL 300) | 1 | |
| 36122 | PITOT PROBE CHARGING ADAPTOR TOOL | 18 | |
| 45216 | TE Connectivity 45216 Compressing Tool, Splice Sleeve - 18-16 AWG | 7 | |
| 49935 | CRIMP TOOL - MOISTURE PROOF SPLICE | 14 | |
| 51431 | TOOL PRESTRESS ADJUSTMENT CHECK | 3 | |
| 64712 | PISTON RING COMPRESSOR TOOL | 1 | |
| 79098 | PROTECTION TOOL | 1 | |
| 94888 | TOOL - COMPRESSION | 1 | |
| 95460 | DYNASWIVEL IMPROVES TOOL MOVEMENT | 1 | |
| 140125 | SPRING COMPRESSION TOOL FORK ASSEMBLY | 1 | |
| 226244 | SEALANT SPREADING AND REMOVAL TOOL | 3 | |
| 234350 | Tool - Sealant Removal, BAC5000, PSD 6-184 Approved | 5 | |
| 235072 | SEALANT REMOVAL TOOL - SEMCO - PROCESS BAC 5000 | 3 | |
| 258432 | CHILL PROTECTOR TOOL | 1 | |
| 290435 | OVER PRESS VALVE ADP TOOL | 1 | |
| 306989 | BRAKE SPREADER TOOL | 1 | |
| 324477 | PROTECT CAP FIRE CART TOOL | 14 | |
| 324520 | CHILL BLOCK AND PROTECTOR TOOL | 1 | |
| 473036 | REPLACEMENT GAUGE TOOL NO. 473036 THIS PUMP CONTAINS A PNEUMATIC FOOT OPERATED HYDRAULIC PUMP, PRESSURE GAUGES, SUPPLY AIR OILER, PRESSURE REGULATOR AND HYDRAULIC HOSES. | 1 | |
| 475006 | SPARK PLUG TOOL SPREADING | 1 | |
| 495676 | KIT,REMOTE PROGRAMMING(ECU),MODEM TOOL | 1 | |
| 501090 | L-382 QEC DRILLING FIXTURE & PROP LINKAGE TOOL | 1 | |
| 502669 | PRESSURE SWITCH ASSEMBLY TOOL | 1 | |
| 575191 | TOOL, PRESSURE ADJUSTMENT | 1 | |
| 592182 | PROOF LOAD TOOL (USE WITH SWD17008) | 1 | |
| 690411 | BLEED AIR SYSTEM PRESSURE AND LEAK CHECK TEST FIXTURE TOOL | 1 | |
| 714164 | ASSEMBLY TOOL FOR SPRING | 1 | |
| 727048 | PRE SETTING TOOL | 1 | |
| 733063 | TOOL ASSEMBLY, DISASSEMBLY SPRINGS | 1 | |
| 876766 | PRESSURE SWITCH REMOVAL TOOL | 1 | |
| 877190 | PRESS-IN TOOL | 1 | |
| 891240 | PRESSURE GAUGE 0-300 PSI TOOL | 1 | |
| 906055 | PRESSING TOOL | 1 | |
| 906056 | PRESSING TOOL | 1 | |
| 970507 | RELIEF PRESSURE TEST TOOL | 1 | |
| 1201570 | PROGRAMMING TOOL | 9 | |
| 1349854 | COMPRESSION TOOL KIT | 1 | |
| 1888706 | PROBE TOOL | 2 | |
| 1900186 | SPRING-CYL BLOCK,RETAINER & DRIVE SHAFT ASSY TOOL | 1 | |
| 1900550 | CYLINDER-BLOCK SPRING COMPRESSION TOOL | 1 | |
| 1900575 | COMPRESSION TOOL | 1 | |
| 1900577 | COMPRESSION TOOL | 1 | |
| 1900746 | COMPRESSION TOOL | 1 | |
| 1900852 | CLUTCH COMPRESSION TOOL | 1 | |
| 2558216 | TOOL Extractor FOB SOUTH AMERICA aprox 35 x 10 x 10 cm, 5KG aprox | 4 | |
| 2560826 | PISTON COMPRESSION TOOL | 1 | |
| 2566533 | Metering Valve sleeve Packing Compression Tool Set | 1 | |
| 2566547 | Integrator Piston Seal Compression Tool Set | 1 | |
| 2566823 | Speed Servo Sleeve Packing Compression Tool Set | 1 | |
| 2566835 | Pressurizing Intallation Tool | 1 | |
| 2680106 | SEAT PRESS TOOL | 1 | |
| 2724301 | TRENT PRE-COOLER DRILL TOOL | 1 | |
| 3405512 | INSERTING TOOL (PRE-WIND TYPE) | 1 | |
| 3791272 | INSTALLING TOOL SPRING | 1 | |
| 4041450 | "COOLANT TANK PRESSURE TOOL | 1 | |
| 4160240 | SEAL COMPRESSION TOOL SET | 1 | |
| 4160313 | SEAL COMPRESSION TOOL | 1 | |
| 4160314 | SEAL COMPRESSION TOOL | 1 | |
| 5153560 | AKKU-FETTPRESSE, KS TOOLS - BATTERY GREASE PRESS | 1 | |
| 6027601 | PRIMARY STRAINER TOOL | 1 | |
| 6500685 | AEROPRODUCTS PROPELLER TOOL 6500685 | 1 | |
| 6547544 | COMPRESSION TOOL | 1 | |
| 6605856 | FLEXIBOX COMPRESSION TOOL | 1 | |
| 6796089 | TOOL, ATTACHMENT, PROPELLER BREAK RELEASE | 4 | |
| 6797062 | ATTACHMENT TOOL, PROPELLER BRAKE RELEASE | 2 | |
| 6798927 | COMPRESSOR IMPELLER CRIMPER LOCK NUT PLIER TOOL | 2 | |
| 6877026 | "COO WASHER ASSEMBLY/ DISASSEMBLY TOOL COMPRESSES SPRING IN CARTRIDGE VALVE FOR INSTALLATION/REMOVAL OF SLOTTED WASHER. | 1 | |
| 6897894 | COMPRESSOR ROTOR CASE ROUNDING TOOL | 2 | |
| 7320001 | GEISPA ACCUBIRD PRO 2200 CORDLESS RIVETING TOOL | 1 | |
| 8547219 | CHATTER PROOF TOOL | 4 | |
| 9300733 | TOOL-SPRING INSTALLER | 1 | |
| 23051180 | PROP SHAFT SEAL INSTALLATION TOOL | 3 | |
| 23053598 | Dimple Tool – Aft Compressor Cup Lock Washer | 1 | |
| 23058452 | Dimple Tool – Cup Washer Lock, Compressor Tie Bolt | 1 | |
| 23063503 | PROP SHAFT SEAL REMOVAL TOOL | 2 | |
| 0638258200 | CRIMP PRESSES AND CRIMP HAND TOOLS | 1 | |
| 1450697204 | Protection Tool | 1 | |
| 2309-T003-001 | TOOL - PROXIMITY SWITCH ADJUSTING | 5 | |
| 2309-T007-401 | TOOL - SPRING MOUNT-ING | 4 | |
| 2309-T009-001 | TOOL - PROXIMITY SWITCH ADJUSTING | 2 | |
| 2309‐T003‐001 | TOOL, PROXIMITY SWITCH ADJUSTING | 5 | |
| 2309‐T007‐401 | TOOL, SPRING MOUNTING | 4 | |
| 2309‐T009‐001 | TOOL, PROXIMITY SWITCH ADJUSTING | 2 | |
| 2356S | SPRING BALANCE TOOL | 1 | |
| 2370-1070-401 | SPRING MOUNTING TOOL | 1 | |
| 2370-S051-401 | PROXIMITY ADJUSTMENT TOOL | 1 | |
| 2370-T010-401 | PROXIMITY SWITCH AD-JUSTMENT TOOL | 4 | |
| 2370-T070-401 | SPRING MOUNTING TOOL | 6 | |
| 2370-T163-401 | PROXIMITY SENSOR ADJUSTING TOOL | 1 | |
| 2370T010-401 | NLG TOOL PROX SWITCH ADJUS | 4 | |
| 2370T070-401 | SPRING MOUNTING TOOL E195 | 6 | |
| 2370‐T010‐401 | Proximity Switch Adjustment Tool | 4 | |
| 23734T201 | TOOL PRESSING | 1 | |
| 23734T201 | Pressing Tool | 1 | |
| 23734T202 | TOOL PRESSING | 1 | |
| 23734T202 | Pressing Tool | 1 | |
| 2444A61 | ARBOR PRESS MODIFIED FOR TOOLING | 1 | |
| 247C5250 | TOOL SET, REMOVE-COMPR REAR FRAME AFT CASE | 1 | |
| 247C5250G01 | TOOL SET, REMOVE-COMPR REAR FRAME AFT CASE | 1 | |
| 24F | PRESSURE BLANK TOOL | 1 | |
| 24M | PRESSURE BLANK TOOL | 1 | |
| 2566533-4 | MV PACKING COMPRESSION TOOL (CAGE: 06848) | 1 | |
| 2566547-4 | SEAL COMPRESSION TOOL (CAGE: 06848) | 1 | |
| 2566810-4 | METERING VALVE SLEEVE PACKING COMPRESSION TOOL SET SIZER (CAGE: 06848) | 1 | |
| 25Y1817A | COMPRESSION TOOL | 4 | |
| 25YTS119R1A | ADAPTER, PRIMING TOOL | 1 | |
| 25YTS11R1A | ADAPTER PRIMMING TOOL | 1 | |
| 26719AT1 | PRESSING TOOL | 1 | |
| 269A9243 | Sleeve - 269A5108 Retainer Removal Tool - Arbor Press | 1 | |
| 269T1005 | Compressor Check Spline Adapter Engine Turning Tool | 2 | |
| 269T1179 | Arbor Press & Staking Tool | 1 | |
| 269T3321 | Upper Pulley Cap Pressing Tool (2 Pieces) | 1 | |
| 27-01-3679 | LOCK TOOL AIL SPRING TAB (MV7627-5-02) | 1 | |
| 27-1-3679 | LOCK TOOL AIL SPRING TAB | 2 | |
| 27.1-3679 | LOCKTOOL,AILERON SPRINGTAB F50 | 2 | |
| 2724505A | TRENT PRE-COOLER DRILL TOOL | 1 | |
| 277-1T1 | TOOL, COMPRESSOR HOLDING CLAMP | 1 | |
| 2791272-1 | SPRING INSTALLATION TOOL | 1 | |
| 28-0-4225 | STANDARD TOOLS SPRING BALANCE | 1 | |
| 28-04225 | STANDARD TOOLS SPRING BALANCE | 1 | |
| 285585-1-1 | WHEEL PRESS TOOL | 1 | |
| 289528-1 | Seal press tool | 2 | |
| 290PSI | PRESSURE GAUGE TOOL | 1 | |
| 293481-1 | SPRING COMPRESSOR TOOL | 1 | |
| 294866-10 | BEARING REMOVAL TOOL (LOCATES SMALLER INSIDE DIAMETER OF 3860180-2 SPUR GEARSHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPUR GEAR FROM 3605094-1 BEARING) | 1 | |
| 294866-7 | BEARING REMOVAL TOOL (USED TO LOCATE IN LARGER ID OF 3860167-1 SPLINED SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPLINED SHAFT FROM 892576-1 BEARING) | 1 | |
| 294866-8 | BEARING REMOVAL TOOL (USED TO LOCATE IN SMALLER ID OF 3860167-1 SPLINED SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPLINED SHAFT FROM 892575-1 BEARING) | 1 | |
| 29491220711 | TOOL - CALIBRATION PROCEDURE | 1 | |
| 296288-1T | ALIGN AND PRESS SHAFT TOOL | 1 | |
| 296868-1 | TOOL: PROBE ASSY | 2 | |
| 298862-1 | SEAL COMPRESSION TOOL | 1 | |
| 29A044 | Probe tool roll & test blocks | 1 | |
| 29BALLPR0PT00L | 29 BALL PROP TOOL | 1 | |
| 2A1841 | BELLVILLE SPRING WASHER INTALL TOOL | 1 | |
| 2AA617-6329-001 | OUTER BEARING SLEEVE PRESS TOOL | 1 | |
| 2C14198G02 | TOOL REMOVAL, RETNR CMPRSSR ROTOR BLADE STG 1 | 3 | |
| 2C14252 | TOOL, LAPPING-HIGH PRESSURE TURB. ROTOR SHAFT | 1 | |
| 2C14252 REV B | TOOL, LAPPING-HIGH PRESSURE TURB. ROTOR SHAFT | 1 | |
| 2C14282G01 | TOOL DESCRIPTION: SET - PRESSURE CHECK, FUEL MANIFOLD | 1 | |
| 2C14660 | TOOL PREBEND | 1 | |
| 2C14660G01 | TOOL, PREBEND AND SEAT RETAINERS | 2 | |
| 2C14660G02 | TOOL, PREBENDER AND SEAT - RETAINERS | 1 | |
| 2C14684 | TOOL SET, REMOVE HP COMPR. STATOR VANE SPRINGS | 1 | |
| 2C14684 REV D | TOOL SET, REMOVE HP COMPR. STATOR VANE SPRINGS | 1 | |
| 2C14684G02 | TOOL SET, REMOVAL-HPC STATOR VANE SPRINGS | 4 | |
| 2C14699G02 | PREBEND TOOL, HPC STAGE 1 BLADE RETAINER, SET | 1 | |
| 2C14704 | TOOL SET, DUMMY SHAFT COMPR/HP TURB. ROTOR | 1 | |
| 2C14704 REV L | TOOL SET, DUMMY SHAFT COMPR/HP TURB. ROTOR | 1 | |
| 2C14704G06 | TOOL SET, DUMMY SHAFT – COMPRESSOR OR HPT ROTOR | 2 | |
| 2C14734P01 | Protector Tool | 3 | |
| 2C14764G06 | DRIVE MOTOR ELECTRIC (220 VAC 50 HZ AND 28 VDC) SPECIAL TOOL FOR PRESERVATION GT | 1 | |
| 2C14798G01 | TOOL INSTALLATION LOW PRESSURE TURBINE | 5 | |
| 2C14920G02 | TOOL SET, BALANCE ‐ HIGH PRESSURE TURBINE ROTOR | 1 | |
| 2C14925G01 | TOOL SET,BALANCE,HIGH PRESURE TURBINE ROTOR | 1 | |
| 2C14933 | FADEC PROGRAMMING TOOL | 1 | |
| 2C14933G03 | FADEC PROGRAMMING TOOL | 1 | |
| 2C18053G02 | TOOL, INSTALLATION - SELF-WRENCHING BOLTS, HIGH PRESSURE TURBINE THERMAL SHIELD | 1 | |
| 2C18059G01 | COVER - PRIMARY NOZZLE THIS TOOL IS FOR CF6-80E1 | 2 | |
| 2C6174G01 | TOOL SET, PRESSURE TEST-FAN FRAME | 1 | |
| 2C6175 | COMPRESSOR CASE FIXTURE TOOL | 1 | |
| 2C6348P02 | PIN GUIDE FOR FAN ROTOR INSTALLATION SPECIAL TOOL FOR REPLACEMENT LOW PRESSURE COMPRESSOR (LPC) | 3 | |
| 2C6552G04 | FIXTURE GRINDING HIGH PRESSURE TURBINE SHROUNDS TOOL | 1 | |
| 2C6563G01 | TOOL, INSTALL/ REMOVE - HIGH PRESSURE TURBINE DAMPER SLEEVE | 1 | |
| 2C6599 | TOOL, PREBEND - COMP. ROTOR, STG. 1 | 1 | |
| 2C6599 REV A | TOOL, PREBEND - COMP. ROTOR, STG. I | 1 | |
| 2C6599G01 | TOOL, PRE-BENDER-COM | 3 | |
| 2C6599P01 | TOOL, RETAINER PRE BEND | 1 | |
| 2C6600 | TOOL SEATING - RETAINER COMPR. RTR BLADE STG.1 | 1 | |
| 2C6600 REV J | TOOL SEATING - RETAINER COMPR. RTR BLADE STG.I | 1 | |
| 2C6600G02 | TOOL SEAT - COMPRESSOR ROTOR BLADE RETAINER, STAGE 1 | 1 | |
| 2C6600G03 | TOOL, TAB BENDER – HIGH PRESSURE COMPRESSOR STAGE 1 BLADE, RETAINER STOP | 4 | |
| 2C6600G04 | TOOL SEAT - COMPRESSOR ROTOR BLADE RETAINER, STAGE 1 | 1 | |
| 2C6601 | TOOL, STARTING AND STRAIGHTENING RETAINER, COMPR R | 1 | |
| 2C660I | TOOL, STARTING AND STRAIGHTENING RETAINER, COMPR R | 1 | |
| 2C6620 | TOOL SET,HOLDNG-COMPRESSOR ROT | 1 | |
| 2C6620G01 | TOOL SET,HOLDNG-COMPRESSOR ROT | 1 | |
| 2C6635 | TOOL SET, SPACERS-COMPR ROTOR BUILDUP | 1 | |
| 2C6635G01 | TOOL SET,SPACER-COMPRESSOR ROT | 1 | |
| 2C6649 | TOOL, NUT STARTING-COMPR ROTOR | 1 | |
| 2C6888 | TOOL, INSTALL. - SELF WRENCHING BOLTS, COMPR. RTR | 1 | |
| 2C6888 REV E | TOOL, INSTALL. - SELF WRENCHING BOLTS, COMPR. RTR | 1 | |
| 2C6888G01 | TOOL,INSTALLATION-COMPRESSOR R | 1 | |
| 2C6888G03 | TOOL, INSTALLATION - SELF-WRENCHING BOLTS, HIGH PRESSURE TURBINE THERMAL SHIELD | 1 | |
| 2C6962G05 | GAGE, SIGHT FOR VSV ACTUATION ARMS SPECIAL TOOL FOR HIGH PRESSURE COMPRESSOR IGV AND VSV VISUAL INDPECTION | 8 | |
| 2C6966G07 | GAGE, SIGHT FOR VSV ACTUATION ARMS SPECIAL TOOL FOR HIGH PRESSURE COMPRESSOR IGV AND VSV VISUAL INDPECTION | 4 | |
| 2C6967G05 | TOOL INSTALLATION - COMPRESSOR ROTOR BLADE RETAINER, STAGE 2 | 1 | |
| 2C6967G06 | TOOL INSTALLATION - COMPRESSOR ROTOR BLADE RETAINER, STAGE 2 | 2 | |
| 2C6967G07 | TOOL INSTALLATION - COMPRESSOR ROTOR BLADE RETAINE | 1 | |
| 2C7085 | TOOL,CLAMP-COMPRESSOR ROTOR AI | 1 | |
| 2C7085G01 | TOOL,CLAMP-COMPRESSOR ROTOR AI | 1 | |
| 2C7373 | SEATING TOOL SET, VANE LINER, COMPR STATOR CASE-FR | 1 | |
| 2C7373 REV J | SEATING TOOL SET, VANE LINER, COMPR STATOR CASE-FRNT & RE | 1 | |
| 2C7373G01 | SEATING TOOL, VANE LINER, COMPRESSOR STATOR CASE - FRONT & REAR | 1 | |
| 2C7373G02 | SEAT TOOL - COMPRESSOR STATOR FIXED VANES LINER INSTALLATION | 1 | |
| 2C7373G03 | SEATING TOOL, VANE LINER, COMPRESSOR STATOR CASE - FRONT & REAR | 1 | |
| 2C7373G04 | SEAT TOOL - COMPRESSOR STATOR FIXED VANES LINER INSTALLATION | 1 | |
| 2C7373G05 | SEATING TOOL, VANE LINER, COMPRESSOR STATOR CASE - FRONT & REAR | 1 | |
| 2C7373G06 | SEATING TOOL, VANE LINER, COMPRESSOR STATOR CASE - FRONT & REAR | 1 | |
| 2C7373G07 | SEAT TOOL - COMPRESSOR STATOR FIXED VANES LINER INSTALLATION | 1 | |
| 2C7373G08 | SEAT TOOL - COMPRESSOR STATOR FIXED VANES LINER INSTALLATION | 1 | |
| 2C8016G03 | GAGE, SIGHT FOR VSV STAGE 5 ACTUATION ARMS SPECIAL TOOL FOR HIGH PRESSURE COMPRESSOR IGV AND VSV VISUAL INDPECTION | 1 | |
| 2C8042 | TOOL SET, WEDGING COMPR ROTOR BLADES | 1 | |
| 2C8072G03 | GEARBOX SEAL PRESS. FIXT. TOOL | 1 | |
| 2C8073G05 | Fan Blade Pre-load Tool | 13 | |
| 2C81213G01 | TOOL, SHIPPING COVER CPRSR INLET | 1 | |
| 2C90509G01 | ENGINE AND PROPELLER GEARBOX HOIST TOOL | 1 | |
| 2C91100G01 | TOOL - COMPRESSOR CASE | 1 | |
| 2D04235G01 | PSP/MLPRF HANDLING TOOL, | 1 | |
| 2EM-18 | Aircraft Tool Supply 2EM-18 Pro 18mm Aircraft Engine Differential Cylinder Pressure Tester with Master Orifice | 1 | |
| 2KPHF-F8 | TANGLESS PREWINDER HAND TOOL 1/2-20 | 1 | |
| 2KPHF6 | THREAD INSERT HAND INSTALLATION TOOL: 3/8-24, CRANK STYLE & TYPE II PREWINDER | 2 | |
| 2MIT2A264-0812-1 | POTABLEWATERTANKENDCAPROTATIONTOOL | 5 | |
| 2MIT311U0050SM2 | MISC TOOL, ANVIL SWAGE KIT, SPRING BEAM CLEVIS, INNER BUSHING | 1 | |
| 2MIT65-45109-22 | MISC. TOOL ADAPTER -0 ENGINE UNIVERSAL PROTCR | 6 | |
| 2MIT65-45109-22-1 | PROTRACTOR ADAPTER MISC TOOL | 1 | |
| 2MITRD00103012 | THRUST REVERSER PRIMARY LOCK HOLD OPEN TOOL | 1 | |
| 2MITRD00103012-GSE | THRUST REVERSER PRIMARY LOCK HOLD OPEN TOOL | 1 | |
| 2MITRD0103012 | T/REV PRIMARY LOCK HOLD- OPEN TOOL 2MITRD0103012-GSE | 1 | |
| 2OHME65B00719 | REMOVAL AND INSTALLATION TOOL - ENGINE PRECOOLER | 1 | |
| 2SJJ04034-01 | PROJECTILE DETECTOR TOOL | 1 | |
| 3-5290-T22 | SPRING COMPRESSION TOOL | 1 | |
| 3-5290-T22PM | TOOL-COMPRESSION,SPRING | 1 | |
| 3-5290T22 | TOOL-COMPRESSION,SPRING | 1 | |
| 30-729 | IDEAL PROFESSIONAL ELCETRICAL 11-PIECE TOOL KIT | 1 | |
| 300BAR | PRESSURE GAUGE TOOL | 1 | |
| 30PSI | PRESSURE GAUGE PILOT VALVE TOOL | 1 | |
| 310-03 | Skyscraper 31003 Amber Ultem 3mm Wide Airbus Profile Fluted Sealant Removal Tool | 3 | |
| 310-14 | Skyscraper 31014 Amber Ultem 14mm Wide Airbus Profile Fluted Sealant Removal Tool | 2 | |
| 310-25 | Skyscraper 31025 Amber Ultem 25mm Wide Airbus Profile Fluted Sealant Removal Tool | 3 | |
| 311-03 | Skyscraper 31103 White POM 3mm Wide Boeing Profile Fluted Sealant Removal Tool | 2 | |
| 311-12-06 | Skyscraper 3111206 White POM 12mm Wide Boeing Profile Fluted Sealant Removal Tool | 2 | |
| 311-14 | Skyscraper 31114 White POM 14mm Wide Boeing Profile Fluted Sealant Removal Tool | 2 | |
| 311-25 | Skyscraper 31125 White POM 25mm Wide Boeing Profile Fluted Sealant Removal Tool | 4 | |
| 313-3 | Skyscraper 3133 Amber Ultem Boeing Profile Seat Track Sealant Removal Tool | 2 | |
| 313-4 | Skyscraper 3134 Amber Ultem Boeing Profile Seat Track Sealant Removal Tool | 2 | |
| 318451-1 | CRIMP TOOL - TE (PROCRIMP) | 1 | |
| 32-01055-1T1 | TOOL- PRESS | 1 | |
| 32-01055-1T2 | TOOL, PRESS | 1 | |
| 3204KTQ-03 | EPR TEST SET TOOL | 1 | |
| 32274-5 | Vibration probe conversion tooling | 1 | |
| 323-51-P-850 | NICOPRESS 51-P-850 MANUAL SWAGING TOOL | 1 | |
| 332A91-3111-01 | PRESSING-IN TOOL | 1 | |
| 332A93-1100-00 | PROTECTION TOOL | 1 | |
| 332A93270001 | SERVO-CONTROL PROTECTIVE TOOL | 1 | |
| 3333-100 | DIGITAL PRESSURIZATION TOOL KIT | 1 | |
| 3401486-10 | TOOL KTT - PROP SHOP | 1 | |
| 3403146-1 | TOOL, INSTL/REM, NEGATOR SPRING | 1 | |
| 3403219-1 | POSITIONING TOOL PROPELLER | 1 | |
| 3403219-7 | RUBBER PROP TOOL | 1 | |
| 3497T11 | COMPRESSION TOOL | 1 | |
| 35-92000-2601 | PROPELLER BRAKE TOOL | 1 | |
| 35-92000-2701 | PROPELLER BRAKE TOOL | 1 | |
| 35-92011-0001 | PROPELLER BRAKE TOOL | 1 | |
| 35-92123-0001 | PROPELLER ANTI-ICE WIRING INSTALLATION TOOL | 1 | |
| 35-92175-0003 | PRESSURE GAUGE KIT - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 35-92178-0001 | LH ELEVATOR TAB PROTRACTOR - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 35-92178-0002 | RH ELEVATOR TAB PROTRACTOR - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 35-92179-0001 | RUDDER TRIM TAB PROTRACTOR - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 35-92180-0001 | COMPRESSOR KIT, ICE PROTECTION AND AIR CONDITIONING SYSTEM - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 350A93-3502-00 | TAIL TRANSMISSION BEARING PRESSURE MOUNTING TOOL | 1 | |
| 350A93-7200-00 | COMPRESSOR BELT INSTALLATION TOOLING | 1 | |
| 350A93720002 | COMPRESSOR-BELT INSTALL TOOL | 1 | |
| 350A94-3250-00 | COMPRESSOR CENTRE DISTANCE CHECKING TOOLS | 1 | |
| 350PSI | PRESSURE GAUGE TOOL | 1 | |
| 3551-04 | PRE WIND INSERTING TOOL | 1 | |
| 355M03160000 | PROXIMITY DETECTOR CHECKING TOOL SUPSD BY 355M03210000 | 1 | |
| 3582T1 | MULTIDIAMETER COMPRESSION TOOL | 1 | |
| 360A91330000 | PRESS OUT CUFF BUSHINGS TOOL (SAP CODE 8334911) | 1 | |
| 361109-RB211 | PRSOV TEST SET TOOL | 1 | |
| 365A94-8280-00 | ALIGNMENT TOOL, PULLEY-COMPRESSOR | 1 | |
| 365A96-3355-00 | TOOL TO PREVENT MOVEMENT OF THE TRH | 1 | |
| 369029985 | BUNGEE SPRING COMPRESSION TOOL ROD AND CHANNEL (PIN 369029985) | 1 | |
| 369D29985 | BUNGEE SPRING COMPRESSOR TOOL ROD & CHANNEL | 1 | |
| 3791272-1 | SPRING INSTALLATION TOOL | 1 | |
| 3791272-1PM | SPRING INSTALLATION TOOL | 1 | |
| 3791896-1 | Bearing press tool | 1 | |
| 37N00001-3 | TOOL - DECOMPRESSION SIMULATOR TOOL | 6 | |
| 38-368-03 | WIRE PROXTEST TOOL FOR PROXIMITY SENSORS | 1 | |
| 38202-143 | SPRAY NOZZLE TOOL | 1 | |
| 383930AT21 | O.D. SIZING TOOL (-1005 ASSY AND PRIOR) | 1 | |
| 383930AT22 | SIZING TOOL (-1005 ASSY AND PRIOR) | 1 | |
| 38396-066 | SPRAY NOZZLE TOOL | 1 | |
| 38S12003000000 | WATER DRAIN PRUGE TOOL | 1 | |
| 390500AT16 | ASSEMBLY TOOL, SPRING COMPRESSOR | 1 | |
| 390531ST1-101 | DIE SWAGING TOOLS: V-PROFILE DIE SUPPORT TOOLS | 1 | |
| 399HT014 | SPRING - LOADED SEATING TOOL HANDLE | 1 | |
| 3A3579-1 | PRV ADJUSTING TOOL | 1 | |
| 3F | PRESSURE BLANK TOOL | 1 | |
| 3G6005G01431 | AW PROPELLER AND TAIL ROTOR CLEAR GAP INSPECTION TOOL | 1 | |
| 3G6005G01531 | AW PROPELLER AND TAIL ROTOR CLEAR GAP INSPECTION TOOL | 2 | |
| 3G6005G01631 | AW PROPELLER AND TAIL ROTOR CLEAR GAP INSPECTION TOOL | 1 | |
| 3G6005G01831 | AW PROPELLER AND TAIL ROTOR CLEAR GAP INSPECTION TOOL | 1 | |
| 3G6305G26731 | TOOL KIT, MGB PRESERVATION | 1 | |
| 3G6405G12651 | TOOL, T/R BLADE PROTECTION | 1 | |
| 3M | PRESSURE BLANK TOOL | 1 | |
| 3MIT315A1001 | Miscellaneous Tool -737 Thrust Reverser Tie Rod Preadjusting | 1 | |
| 3MIT65B90101 | LOCATING TOOL - PRECOOLER OUTFLOW VALVES, JT9D | 1 | |
| 3T6521A00146W142C | SEAL PRESS TOOL | 1 | |
| 3T6522A00231W142AK | TAIL ROTOR GEAR BOX/MAST OUTPUT OIL SEAL ASSEMBLY PRESS TOOL | 1 | |
| 400PSI | PRESSURE GAUGE TOOL | 1 | |
| 4040701-001 | TOOL SIGHT GLASS REMOVAL FOR COMPRESSOR | 1 | |
| 40543264ST | PISTON SEAT PRESSURE TEST JIG TOOL (2.0 – 2.5 KG) (KK) | 1 | |
| 40KIT6002 | PREFORM PACKING INSTALL TOOL | 1 | |
| 40TL22756 | COM-937 TOOL - INSTALLATION, PREFORMED PACKING | 3 | |
| 4100362-T-1 | PRESSING TOOL | 1 | |
| 41141026-501 | TOOL, SPRING INSTALLATION | 1 | |
| 41141026-501CLH | SPRING INSTALLATION TOOL | 1 | |
| 411B60 | TOOL - SEALANT REMOVAL, BAC5000, PSD 6-184 APPROVED | 1 | |
| 411B90 | Tool - Sealant Removal, BAC5000, PSD 6-184 Approved | 1 | |
| 412-240-018-101 | PRESSING TOOL SET | 1 | |
| 4124-0001W02 | NLG EDGE PROTECTION TOOL | 1 | |
| 41446-T601 | PRESSING TOOL | 1 | |
| 4160240-1 | SEAL COMPRESSION TOOL (3IT) | 1 | |
| 41759T600 | PRESSING TOOL | 1 | |
| 41759T601 | PRESSING TOOL | 1 | |
| 41771T603 | PRESSING TOOL | 1 | |
| 41771T604 | PRESSING TOOL | 1 | |
| 42-27-04-021 | VEE BLOCK OF THE ABOVE MENTIONED SPECIAL PRESSING TOOL | 1 | |
| 42-903-04-050 | SPECIAL PRESSING TOOL FOR FITTING THE INNER OF RACES B | 1 | |
| 422370M0NT2-1 | LOWER PRESS TOOL | 1 | |
| 422370M0NT2-2 | UPPER PRESS TOOL | 1 | |
| 423085M0NT6-1 | PRESS TOOL TO FIT THE SLEEVE BEARING IN THE HANDWHEEL | 1 | |
| 423085M0NT6-2 | PRESS TOOL TO FIT THE SLEEVE BEARING IN THE HANDWHEEL | 1 | |
| 424552M0NT1-1 | PRESS TOOL TO DISASSEMBLR THE BEARING | 1 | |
| 42770T600 | PRESSING TOOL | 1 | |
| 42885T600 | PRESSING TOOL | 1 | |
| 429-201-006-101 | PROPELLER ANGLE CALIBRATION TOOL | 1 | |
| 429-242-008-101 | PROTECTOR TOOL | 1 | |
| 4333093995 | HT-1650 TGR Professional Brake Line Flaring Tool- 45 and 37 degree Set | 1 | |
| 43454-T601 | PRESSING TOOL | 1 | |
| 44108-T600 | PRESSING TOOL | 1 | |
| 444-65255-000 | TEST TOOL FOR PRESSURE GAUGE REMOTE PLUG (YOU LIST THIS ON PARTSBASE) | 1 | |
| 4441730-000 | TOOL-PRESSURE REGULATOR,O2 | 1 | |
| 45-127-1 | Custom Probe Locating Bushing Tool Figure 1 Page 6 Item #1. Material 2024-T3 Aluminum. | 1 | |
| 45-127-2 | Custom Probe Locating Bushing Tool Figure 1 Page 6 Item #2. Material 2024-T3 Aluminum. | 1 | |
| 45-135030-9/ 810 | SERIES REFERENCE: 1077. NOMENCLATURE: TRIM TAB FREE PLAY CHECK FIXTURE. SPECIFICATIONADDITIONAL DATA: LOCAL MANUFACTURE PER APPROPRIATE MM ATA 27 AS ALTERNATE TOOL. CALIBRATED DIAL INDICATOR MUST BE WITH UNIT FOR USE. ATA: 270055 | 2 | |
| 455-7081 | LEVEL SHIFTER (TOOL PARA PROGRAMAR Y TESTEAR ELT) | 1 | |
| 460004330/132 | TOOL, PRESS PAD | 6 | |
| 460004493 | COMPRESSTION TOOL | 1 | |
| 460005832 | TOOL R/I SPRING MLG | 31 | |
| 460005970 | TOOL - DOWNLOCK SPRINGBOX INST. (MV7632-5-15) | 1 | |
| 460006501-1 | DOUBLE ENDED PRESS TOOL | 2 | |
| 460007169 | COMPRESSION TOOL R/I OF MLG | 8 | |
| 4610352503 | SPRING ADJUSTING TOOL | 1 | |
| 4610382503 | SPRING ADJUSTING TOOL | 1 | |
| 465199-1 | TE Connectivity 465199-1 Extractor Tool For Printed Circuit Board Connectors | 1 | |
| 48101-7015006 | TANK PRESSURE TOOL | 1 | |
| 48101-7015006-200 | TANK PRESSURE TOOL | 1 | |
| 48LBF | SPRING BALANCE 20DAN (48LBF) TOOL | 1 | |
| 4920-99-617-1858 | PRESS TOOL | 1 | |
| 4965A | COUNTERWEIGHT BUSHING REMOVER/REPLACER TOOL FABRICAR O COMPRAR | 1 | |
| 4F | PRESSURE BLANK TOOL | 1 | |
| 4M | PRESSURE BLANK TOOL | 1 | |
| 4M1T65B80307-1 | PROTRACTOR CONTROL COLUMN TOOL | 1 | |
| 4MIT65B80307 | PROTRACTOR CONTROL COLUMN TOOL | 5 | |
| 5/16 UNF | PRE-WIND TANGLESS TOOL | 1 | |
| 50-590158-25 | TOOL-PROP RIGGING | 2 | |
| 500-0035-1 | TOOL REPRESENTING CLOGGED FILTERING ELEMENT | 1 | |
| 500-0036-1 | TOOL REPRESENTING CLOGGED FLUID SEPARATION ELEMENT | 1 | |
| 5000 PSI | PRESSURE GAUGE (TOOL) | 1 | |
| 500PSI | PRESSURE GAUGE TOOL | 1 | |
| 5011565-T | SPRING COMPRESSION TOOL | 1 | |
| 5065-10 | ARBOR PRESS TOOLING AVOX SYSTEMS (SAFRAN) | 12 | |
| 50PSI | PRESSURE GAUGE TOOL | 1 | |
| 51-G-887 | NICOPRESS TOOL | 1 | |
| 51-P-850 | NICOPRESS 51-P-850 MANUAL SWAGING TOOL | 1 | |
| 5120-00-H00-1131 | Spring Compressing Tool | 1 | |
| 5120-14-545-4945 | PRESS TOOL | 1 | |
| 513-32-12-052 | COMPRESSION TOOL (NLG SPRING) | 1 | |
| 513-32-12-052B | tool compression | 1 | |
| 513.32.12.052 | COMPRESSION TOOL | 1 | |
| 51774- T1 | PRESSING TOOL | 1 | |
| 51774-T1 | Pressing Tool | 1 | |
| 51774T1 | PRESSING TOOL (IN) | 1 | |
| 51774T1PM | PRESSING TOOL (IN) | 1 | |
| 51954T1 | Pressing tool | 1 | |
| 525421-5 | PROTOTYPING TOOL M/F 7 | 1 | |
| 528-04 | PRE-WIND INSERTION TOOL | 1 | |
| 528-06 | PRE-WIND INSERTION TOOL | 1 | |
| 52X-11-07 | DOOR TENSATOR SPRING TOOLING | 1 | |
| 52X-11-14 | DOOR TENSATOR SPRING TOOLING | 1 | |
| 53-256-FK | USATCO 37° Single & Double Lap Flaring Tool Kit (Includes 1: Flaring Tool, Protrusion Gauge) (Add to cart: Add To Cart) (Includes 1: Flaring Tool, Inner-Outer Ream Tubing Cutter, Carr) (Add to cart: Add To Cart) | 2 | |
| 53-425 | PROFESSIONAL AERO SHEETMETAL RIVETING TOOLS KIT (367 PCS.) | 1 | |
| 53-70458 | USATCO Pro Composite Tool Kit (Description: Complete Kit) (Add to cart: Add To Cart) | 1 | |
| 53714-1102 | TOOL, A220 NLG SEAL PROTECTION - LOWER CAM | 1 | |
| 53759T200 | Piston Stop Preformed Packing Installation Tool | 1 | |
| 550T05659-401 | PRAETOR 600 FLAP RIGGING TOOLING | 1 | |
| 55535S0003 | PRESSING TOOL | 1 | |
| 55575S0000 | COMPRESSION TOOL | 1 | |
| 55595S0001 | PRESS IN TOOL | 1 | |
| 55680S0000 | PRESS-IN TOOL | 1 | |
| 55681S0000 | PRESS IN TOOL | 1 | |
| 55682S0000 | PRESSING TOOL | 1 | |
| 55683S0000 | PRESSING TOOL | 1 | |
| 55787S0001 | PRESS IN TOOL | 1 | |
| 558-1-01530 | COMPRESSION TOOL | 1 | |
| 558-1-101530 | COMPRESSOR TOOL | 1 | |
| 558-2-03160 | PRESS TOOL | 1 | |
| 558-2-3160 | PRESS TOOL | 1 | |
| 55806S0001 | PRESSING TOOL | 1 | |
| 56065S0000 | PRESSING TOOL | 1 | |
| 56075S0000 | PRESS IN PRESS OUT TOOL | 1 | |
| 56086S0000 | PRESS IN PRESS OUT FLANGE TOOL | 1 | |
| 56087S0000 | PRESS IN PRESS OUT FLANGE TOOL | 1 | |
| 56088S0000 | PRESS IN PRESS OUT TOOL | 1 | |
| 56091S0000 | PRESS IN PRESS OUT TOOL | 1 | |
| 56486S0000 | PRESS IN TOOL | 1 | |
| 56487S0000 | PRESS IN TOOL | 1 | |
| 56512-T1 | Pressing Tool | 1 | |
| 56512-T3 | PRESSING TOOL | 1 | |
| 56512T1 | PRESSING TOOL | 1 | |
| 56546S0000 | PRESS IN TOOL | 1 | |
| 56579S0000 | Spring Compression Tool | 2 | |
| 56616S0000 | PRESS OUT TOOL | 1 | |
| 56629T1 | PRESSING TOOL | 1 | |
| 56694-T2 | PRESSING TOOL | 1 | |
| 56699T2 | Pressing Tool | 1 | |
| 56733S0000 | PRESS IN OUT TOOL | 1 | |
| 57449A0000-01 | PRESS OUT TOOL | 1 | |
| 57589A0000-01 | PRESS IN TOOL | 1 | |
| 57589A0000-01 PM | PRESS IN TOOL | 1 | |
| 57589A0000-01PM | PRESS IN TOOL | 1 | |
| 57738A0000-01 | TOOL RIGGIN NLG PROX. SWITCH | 3 | |
| 57921-T1 | PRESSING TOOL | 1 | |
| 57994A0000-01 | PRESS OUT TOOL | 1 | |
| 57994A0000-01 PM | PRESS OUT TOOL | 1 | |
| 57994A0000-01PM | PRESS OUT TOOL | 1 | |
| 58096A0000-01 | PRESS OUT TOOL | 1 | |
| 58433-3 | CRIMP TOOL - DINOSUAR AMP (PRO CR ASSY, RBY IS9252) | 6 | |
| 58433-3 | CRIMP TOOL - DINOSUAR AMP (PRO CR ASSY, RBY IS9252) | 6 | |
| 58517-3 | PRO-CRIMPER II TOOL W/DIE SET | 1 | |
| 58522-1 | PRO-CRMPR II TOOL & DIE | 1 | |
| 58524-1 | PROCRIMPER TOOL & DIE | 1 | |
| 58525-1 | PROCRIMPER TOOL & DIE | 1 | |
| 58528-1 | PROCRIMPER TOOL & DIE | 1 | |
| 58530-1 | AMP PRO-CRIMPER HAND TOOL II | 1 | |
| 58541-1 | PRO-CRIMPER HAND TOOL & DIE | 1 | |
| 58541-2 | PRO-CRIMPER HAND TOOL DIE | 1 | |
| 58548-1 | PRO-CRIMPER HAND TOOL & DIE | 1 | |
| 58551-1 | AMP PRO-CRIMPER HAND TOOL ASSY | 1 | |
| 58560-1 | PRO-CRIMP TOOL 10 POS MOD PLUG | 1 | |
| 58583–2 | HAND CRIMPING TOOL ASSEMBLY (PRO-CRIMPER LLL) | 1 | |
| 58590-1 | PROCRIMP TOOL W/DIE MPQ | 1 | |
| 58595-1 | PROCRIMP TOOL PQS | 1 | |
| 58596-1 | PROCRIMP TOOL PQS | 1 | |
| 58611-1 | PRO-CRIMP TOOL MQS REC | 1 | |
| 58612-1 | PRO-CRIMPER TOOL MT2 REC | 1 | |
| 58613-1 | PRO-CRIMP TOOL JPT REC | 1 | |
| 58613-T4 | PRESSING TOOL | 1 | |
| 58613-T5 | PRESSING TOOL | 1 | |
| 58613T5 | PRESSING TOOL | 1 | |
| 58649-2 | PRO-CRIMPER HAND TOOL & DIE | 1 | |
| 5930314-401 | MLG SPRING STRECHING TOOL LH | 1 | |
| 5930314-402 | MLG SPRING STRECHING TOOL RH | 1 | |
| 59636T1 | Pressing Tool | 1 | |
| 5F | PRESSURE BLANK TOOL | 1 | |
| 5M | PRESSURE BLANK TOOL | 1 | |
| 60 PSI | PRESSURE GAUGE (TOOL) | 1 | |
| 60-998 | TOOL-HEAT GUN KIT, ENG STWG SHIP PROTECT | 1 | |
| 6001321-001 | SPARE SPRING RATCHET CRIMP TOOL | 1 | |
| 600PSI | PRESSURE GAUGE TOOL | 1 | |
| 611000GSE170 | TOOL PROP PITCH CHANGE (BLADE BAT) | 1 | |
| 612A050-A | HIGH PRESSURE NITROGEN FILLING TOOL | 1 | |
| 615P016F035 | DYNAMIC ROTATING METAL PROBE EDDY CURRENT TOOLS | 2 | |
| 615P04F035 | DYNAMIC ROTATING METAL PROBE EDDY CURRENT TOOLS | 1 | |
| 616600AT3 | SPRING COMPRESSION TOOL | 1 | |
| 6199ES702-181 | TOOL FOR LOW PRESSURE LEAK TEST | 1 | |
| 62100-1800 | DDR3 DIMM Latch Tower Spreading Tool | 1 | |
| 62100-2200 | Manual Press with IDT Ribbon Cable Tool Kit | 1 | |
| 62100-2501 | Lower Alignment Tool for 1.27mm Pitch Receptacle, Press-Fit Assembly, 40 Circuits | 1 | |
| 62100-2502 | Upper Alignment Tool for 1.27mm Pitch Receptacle, Press-Fit Assembly, 40 Circuits | 1 | |
| 62100-2601 | Lower Alignment Tool for 1.27mm Pitch Receptacle, Press-Fit Assembly, 80 Circuits | 1 | |
| 62100-2602 | Upper Alignment Tool for 1.27mm Pitch Receptacle, Press-Fit Assembly, 80 Circuits | 1 | |
| 62100-9630 | Impel™ Backplane Press-In Tool | 1 | |
| 62100-9640 | Impel™ Press-In Tool | 1 | |
| 62200-4400 | EVC MicroCross Ferrule Crimp Tool Kit for the 11-31-6356 Molex Arbor Press | 1 | |
| 62200-7400 | Tool Kit for Standard Manual Press FFC | 1 | |
| 62200-8900 | Manual Press for Micro-D Backshell Crimp Tool Kit, 9 Circuits | 1 | |
| 622008900 | MANUAL PRESS FOR MICRO-D BACKSHELL CRIMP TOOL KIT, 9 CIRCUITS | 1 | |
| 62201-6250 | Press Block Removal Tool | 1 | |
| 62201-6600 | Ribbon Cable Tool Kit, Press Not Included | 1 | |
| 62201-7300 | Press-In Tool for High Speed Edge Card | 1 | |
| 62201-8000 | DVI MicroCross Ferule Crimp Tool Kit for the 11-31-6356 Molex Arbor Press | 1 | |
| 62201-8601 | Press-In Tool Vertical Header 11-Row, 5-Column | 1 | |
| 62201-8602 | Press-In Tool for Vertical Header 11-Row, 6-Column | 1 | |
| 62201-8603 | Press-In Tool for Vertical Header 11-Row, 10-Column | 1 | |
| 62201-8604 | Press-In Tool for Right Angle Receptacle and Header 11-Row, 5-Column | 1 | |
| 62201-8605 | Press-In Tool for Right Angle Receptacle and Header 11-Row, 6-Column | 1 | |
| 62201-8606 | Press-In Tool for Right Angle Receptacle and Header 11-Row, 10-Column | 1 | |
| 62201-8607 | Press-In Tool for Vertical Header 7-Row, 4-Column | 1 | |
| 62201-8608 | Press-In Tool for Vertical Header 7-Row, 6-Column | 1 | |
| 62201-8609 | Press-In Tool for Vertical Header 7-Row, 10-Column | 1 | |
| 62201-8610 | Press-In Tool for Right Angle Receptacle and Header 7-Row, 4-Column | 1 | |
| 62201-8611 | Press-In Tool for Right Angle Receptacle and Header 7-Row, 6-Column | 1 | |
| 62201-8612 | Press-In Tool for Right Angle Receptacle and Header 7-Row, 10-Column | 1 | |
| 62201-8617 | Press-In Tool for Vertical Header 11-Row, 8-Column | 1 | |
| 62201-8618 | Press-In Tool for Right Angle Receptacle and Header 11-Row, 8-Column | 1 | |
| 62201-8619 | Press-In Tool for Vertical Header 15-Row, 8-Column | 1 | |
| 62201-8620 | Press-In Tool for Vertical Header 15-Row, 9-Column | 1 | |
| 62201-8621 | Press-In Tool for Vertical Header 15-Row, 10-Column | 1 | |
| 62201-8622 | Daughter Card Press-In Tool | 1 | |
| 62201-8623 | Press-In Tool for Right Angle Receptacle 15-Row, 9-Column | 1 | |
| 62201-8624 | Press-In Tool for Right Angle Receptacle 15-Row, 10-Column | 1 | |
| 62201-8625 | Press-In Tool for Vertical Header 5-Row, 6-Column | 1 | |
| 62201-8626 | MICRO TCA Press-In Tool | 1 | |
| 62201-8627 | Press-in Tool for Right Angle Power Receptacle and Header for 7-Row | 1 | |
| 62201-8628 | Press-in Tool for Right Angle Power Receptacle and Header for 11-Row | 1 | |
| 62201-8629 | Press-in Tool for Right Angle Power Header for 15-Row | 1 | |
| 62201-8630 | Press-in Tool for Vertical Power Receptacle for 7-Row | 1 | |
| 62201-8631 | Press-in Tool for Vertical Power Receptacle for 11-Row | 1 | |
| 62201-8632 | Press-in Tool for Vertical Power Receptacle for 15-Row | 1 | |
| 62201-8639 | Press-In Tool for 6-Pair by 14-Column Backplane | 1 | |
| 62201-8640 | Backplane Module Installation Press-In Tool | 1 | |
| 62201-8641 | Daughter Card Module Installation Press-In Tool | 1 | |
| 62201-8642 | Right Angle Power Module Installation Press-In Tool | 1 | |
| 62201-8643 | Vertical Power Module Installation Press-In Tool | 1 | |
| 62201-8644 | Backplane Module Installation Press-In Tool | 1 | |
| 62201-8645 | Daughter Card Module Installation Press-In Tool | 1 | |
| 62201-8646 | Daughter Card Module Installation Press-In Tool for 3-Pair by 10-Column Assemblies | 1 | |
| 62201-8647 | Backplane Module Installation, Press-In Tool | 1 | |
| 62201-8648 | Vertical Power Module Installation, Press-In Tool | 1 | |
| 62201-8649 | Right Angle Power Module Installation, Press-In Tool | 1 | |
| 62201-8650 | Daughter Card Module Installation Press-In Tool for 3-Pair by 16-Column Assemblies | 1 | |
| 62201-8651 | Backplane Module Installation, Press-In Tool | 1 | |
| 62201-8654 | Press-In Tool for 80A Right Angle Plug | 1 | |
| 62201-8655 | Press-In Tool for 150A Right Angle Plug | 1 | |
| 62201-8657 | Press-In Tool for Daughter Card Module | 1 | |
| 62201-8658 | Press-In Tool for Backplane Module | 1 | |
| 62201-8659 | Daughter Card Module Installation Press-In Tool for 5-Pair by 16-Column Assemblies | 1 | |
| 62201-8661 | Daughter Card Signal Module Assembly Press-In Tool for 6-Pair by 10-Column Assemblies | 1 | |
| 62201-8662 | Backplane Signal Module Assembly Press-In Tool for 6-Pair by 10-Column Assemblies | 1 | |
| 62201-8663 | Daughter Card Signal Module Assembly Press-In Tool for 6-Pair by 16-Column Assemblies | 1 | |
| 62201-8664 | Press-in-Tool for Daughter Card Signal Module, 6-Pair by 16-Column Assemblies | 1 | |
| 62201-8666 | Press-In Tool for Power Module Assembly | 1 | |
| 62201-8667 | Press-In Tool for 5-Pair Assemblies | 1 | |
| 62201-8668 | Press-In Tool for Power Module Assembly | 1 | |
| 62201-8669 | Press-In Tool for Power Module Assembly, 6-Pair Assemblies | 1 | |
| 62201-8670 | Press In Tool for Vertical Receptacle | 1 | |
| 62201-8671 | Vertical Receptacle Press-In Tool | 1 | |
| 62201-8672 | Vertical Receptacle Press-In Tool | 1 | |
| 62201-8673 | Plug and Receptacle Housing Press-In Tool for Plug and Receptacle | 1 | |
| 62201-8674 | Impact™ Backplane Press-In Tool, 3-Pair by 8-Column Assemblies | 1 | |
| 62201-8675 | Daughter Card Module Installation Press-In Tool for 3-Pair by 8-Column Assemblies | 1 | |
| 62201-8676 | Press-In Tool for Backplane Module | 1 | |
| 62201-8677 | Press-In Tool for Daughter Card Module | 1 | |
| 62201-8678 | Backplane Press-In Tool | 1 | |
| 62201-8679 | Backplane Press-In Tool for 4-Pair by 6-Column Assemblies | 1 | |
| 62201-8682 | Enhanced Daughter Card Press-In Tool | 1 | |
| 62201-8689 | Press-In Tool for 6-Pair Vertical Power Header | 1 | |
| 62201-8692 | Backplane Module Installation Press-In Tool for 2-Pair by 10-Column Assemblies | 1 | |
| 62201-8698 | Press-In Tool for 6-Pair by 14-Column Backplane | 1 | |
| 62201-8706 | Tinman Dual Vertical Header Press-In Tool for 5-Pair by 8 Column Assemblies | 1 | |
| 62201-8707 | Tinman Dual Vertical Header Press-In Tool for 5-Pair by 10 Column Assemblies | 1 | |
| 62201-8714 | Press-In Tool for Impact™ Power Header | 1 | |
| 62201-8717 | Press-In Tool for Power Module Assembly | 1 | |
| 62201-8718 | Press-In Tool for Power Module Assembly | 1 | |
| 62201-8722 | Tinman Dual Vertical Header Press-In Tool for 5-Pair by 8 Column Assemblies | 1 | |
| 62201-8727 | Backplane Module Installation Press-In Tool | 1 | |
| 62201-8734 | Press-In Tool for 46 Circuit Assemblies | 1 | |
| 62201-8735 | Press-In Tool for Daughter Card 5-Pair by 12-Column Assemblies | 1 | |
| 62201-8736 | Press-In Tool for 12.5 Gbps Edge Card Connector | 1 | |
| 62201-8744 | Press-In Tool for Daughter Card | 1 | |
| 62201-8746 | Press-In Tool for Daughter Card | 1 | |
| 62201-8754 | Press-In Tool for Daughter Card 5-Pair by 8-Column Assemblies | 1 | |
| 62201-8762 | Press in Tool for Daughter Card 6-Pair by 12-Column Assemblies | 1 | |
| 62201-8778 | Press-in-Tool for Daughter Card Signal Module, 2-Pair by 10-Column Assemblies | 1 | |
| 62201-8779 | Press-in-Tool for Daughter Card Signal Module, 2-Pair by 16-Column Assemblies | 1 | |
| 62201-8781 | Backplane Press-In Tool | 1 | |
| 62201-8783 | Backplane Module Installation Press-In Tool | 1 | |
| 62201-8787 | Backplane Press-In Tool | 1 | |
| 62201-8790 | Backplane Press-In Tool | 1 | |
| 62201-8793 | Impact™ Backplane Press-In Tool | 1 | |
| 62201-8794 | Impact™ Backplane Module Installation Press-In Tool | 1 | |
| 62201-8795 | Impact™ Backplane Module Installation Press-In Tool | 1 | |
| 62201-8801 | Impact™ 85 Ohm Backplane Press-In Tool for 3-Pair by 8-Column Assemblies | 1 | |
| 62201-8804 | Impact™ 85 Ohm Backplane Press-In Tool for 5-Pair by 12-Column Assemblies | 1 | |
| 62201-8807 | Impact™ 85 Ohm Backplane Press-In Tool for 6-Pair by 10-Column Assemblies | 1 | |
| 62201-8810 | Impact™ 85 Ohm Backplane Press-In Tool for 6-Pair by 16-Column Assemblies | 1 | |
| 62201-8813 | Impact™ 85 Ohm Backplane Press-In Tool | 1 | |
| 62201-8816 | Backplane Press-In Tool | 1 | |
| 62201-8821 | Impact™ 85 Ohm Backplane Press-In Tool | 1 | |
| 62201-8824 | Impact™ 85 Ohm Backplane Press-In Tool | 1 | |
| 62201-8826 | Impact™ Backplane Press-In Tool | 1 | |
| 62201-8833 | Impact™ Backplane Module Installation Press-In Tool | 1 | |
| 62201-8836 | Impact™ Backplane Press-In Tool | 1 | |
| 62201-8839 | Impact™ Daughtercard Module Installation Press-In Tool | 1 | |
| 62201-8840 | Impact™ Daughtercard Press-In Tool | 1 | |
| 62201-8844 | Impact™ 85 Ohm Backplane Press-In Tool | 1 | |
| 62201-8853 | Impact™ Backplane Press-In Tool | 1 | |
| 62201-8856 | Press-In Tool for Impact™ Signal Module Assembly | 1 | |
| 62201-8857 | Press-In Tool for Impact™ Signal Module Assembly | 1 | |
| 62201-8859 | Press-In Tool for Impact™ Signal Module Assembly | 1 | |
| 62201-8860 | Impact™ Vertical Mezzanine Signal Module Installation Press-In Tool | 1 | |
| 62201-8868 | Impact™ Daughter Card Press-In Tool | 1 | |
| 62201-8869 | Impact™ Backplane Press-In Tool | 1 | |
| 62201-8872 | Impact™ Backplane Press-In Tool | 1 | |
| 62201-8873 | Impact™ Backplane Press-In Tool | 1 | |
| 62201-8874 | Impact™ Backplane Press-In Tool | 1 | |
| 62201-8875 | Impact™ Backplane Press-In Tool | 1 | |
| 62201-8879 | Impact™ Backplane Press-In Tool for Impact™ 85 Ohm Vertical Backplane Assembly | 1 | |
| 62201-8882 | Impact™ 85 Ohm Backplane Press-In Tool | 1 | |
| 62201-8903 | Impel™ Daughter Card Press-In Tool | 1 | |
| 62201-8915 | Impel™ Daughter Card Press-In Tool | 1 | |
| 62201-8919 | Impel™ Daughter Card Press-In Tool | 1 | |
| 62201-8920 | Impel™ Press-In Tool | 1 | |
| 62201-8923 | Impel™ Daughter Card Press-In Tool | 1 | |
| 62201-8924 | Impel™ Backplane Press-In Tool | 1 | |
| 62201-8933 | Impel™ Backplane Press-In Tool | 1 | |
| 62201-8936 | IMPEL™ Backplane Press-In Tool | 1 | |
| 62201-8943 | IMPEL Backplane Press-In Tool | 1 | |
| 62201-8946 | IMPEL™ Backplane Press-In Tool | 1 | |
| 62201-8949 | IMPEL Backplane Press-In Tool | 1 | |
| 62201-8955 | Impel™ Backplane Press-In Tool | 1 | |
| 62201-8959 | Impel™ Daughtercard Module Installation Press-In Tool | 1 | |
| 62201-8960 | Impel Daughtercard Press-In Tool | 1 | |
| 62201-8961 | Impel™ Daughtercard Module Installation Press-In Tool | 1 | |
| 62201-8962 | Impel™ Daughtercard Press-In Tool | 1 | |
| 62201-8964 | Impel Daughtercard Press-In Tool | 1 | |
| 62201-8965 | IMPEL Backplane Module Installation Press-In Tool | 1 | |
| 62201-8966 | Impel Daughtercard Press-In Tool | 1 | |
| 62201-8969 | Impel™ Daughtercard Module Installation Press-In Tool | 1 | |
| 62201-8972 | Impel™ Daughtercard Module Installation Press-In Tool | 1 | |
| 62201-8975 | Impel™ Daughtercard Module Installation Press-In Tool | 1 | |
| 62201-8976 | Impel™ Daughtercard Module Installation Press-In Tool | 1 | |
| 62201-8978 | Impact™ Backplane Press-In Tool | 1 | |
| 62201-8979 | Impact™ RAM Press-In Tool | 1 | |
| 62201-8980 | Impel™ Daughtercard Module Installation Press-In Tool | 1 | |
| 62201-8981 | Impel™ Backplane Press-In Tool | 1 | |
| 62201-8988 | Impel™ Backplane Assembly Press-In Tool | 1 | |
| 62201-8991 | Impel™ Daughtercard Press-In Tool | 1 | |
| 62201-8995 | Impel™ Daughtercard Press-In Tool | 1 | |
| 62201-9800 | Manual Press for Micro-D Backshell Crimp Tool Kit, 15 Circuits | 1 | |
| 62202-0000 | Manual Press for Micro-D Backshell Crimp Tool Kit, 25 Circuits | 1 | |
| 62202-0235 | Modular Press In Tool | 1 | |
| 62202-0236 | Modular Press In Tool | 1 | |
| 62202-0237 | Modular Press In Tool | 1 | |
| 62202-0238 | Modular Press In Tool | 1 | |
| 62202-0239 | Modular Press In Tool | 1 | |
| 62202-0243 | Modular Press In Tool | 1 | |
| 62202-1801 | Modular Press-In Tool | 1 | |
| 62202-1802 | Modular Press-In Tool | 1 | |
| 62202-1803 | Modular Press-In Tool | 1 | |
| 62202-1804 | Modular Press-In Tool | 1 | |
| 62202-1805 | Modular Press-In Tool | 1 | |
| 62202-1806 | Modular Press-In Tool | 1 | |
| 62202-1807 | Modular Press-In Tool | 1 | |
| 62202-1808 | Modular Press-In Tool | 1 | |
| 62202-1809 | Modular Press-In Tool | 1 | |
| 62202-1910 | Modular Press In Tool, 4 Circuits | 1 | |
| 62202-1920 | Modular Press In Tool, 6 Circuits | 1 | |
| 62202-1930 | Modular Press In Tool, 10 Circuits | 1 | |
| 62202-1940 | Modular Press In Tool, 20 Circuits | 1 | |
| 62202-1950 | Modular Press In Tool, 40 Circuits | 1 | |
| 62202-1960 | Modular Press In Tool, 80 Circuits | 1 | |
| 62202-2026 | GbX-L™ Backplane Press-In Tool | 1 | |
| 62202-2801 | Press In Tool | 1 | |
| 62202-3025 | Press-In Tool for Backplane | 1 | |
| 62202-3026 | Backplane Press-In Tool | 1 | |
| 62202-3030 | Press in Tool for Backplane | 1 | |
| 62202-3031 | Backplane Press-In Tool | 1 | |
| 62203-0026 | Impact™ Daughter Card Press-In Tool | 1 | |
| 62203-0027 | Impact™ Orthogonal Direct Ram Module Installation Press-In Tool 4-Pair by 8 Column | 1 | |
| 62203-0028 | Impact™ Orthogonal Direct Ram Module Installation Press-In Tool 5-Pair by 10 Column | 1 | |
| 62203-0029 | Impact™ Orthogonal Direct Ram Module Installation Press-In Tool | 1 | |
| 62203-0031 | CXP Press-In Tool | 1 | |
| 62203-0032 | CXP Press-In Tool | 1 | |
| 62203-0050 | Press-In Tool | 1 | |
| 62203-0070 | Press-In Tool for XFP Cage Assembly | 1 | |
| 62203-0110 | Press-In Tool | 1 | |
| 62203-0120 | Press-In Tool Vertical CXP HSC Connector Assembly | 1 | |
| 62203-0200 | Press-In Tool | 1 | |
| 62203-0300 | Press-In Tool | 1 | |
| 62203-0400 | Press-In Tool | 1 | |
| 62203-0420 | iPass+™ HSC Stack Dual-Port Press-In Tool | 1 | |
| 62203-0460 | Impact™ Backplane Press-In Tool | 1 | |
| 62203-0485 | Impact™ Backplane Press-In Tool | 1 | |
| 62203-0575 | Impact™ Backplane Press-In Tool | 1 | |
| 62203-0580 | Impact™ Backplane Press-In Tool | 1 | |
| 62203-0585 | Impact™ Backplane Press-In Tool | 1 | |
| 62203-0700 | Press-In Tool for zHD Connector Assembly | 1 | |
| 62203-0770 | Press-In Tool for iPass Vertical zHD | 1 | |
| 6262A1000-01 | ARJ MAIN LANDING GEAR SPRING MOUNTING TOOL | 1 | |
| 63040005-1 | MLG SPRING TOOL | 2 | |
| 63041006-1 | SPRING ASSEMBLY INSTALLATION TOOL | 4 | |
| 63041006−1 | Spring Forming Tool NLG | 4 | |
| 636-2000-19GSE | PROTECTOR TOOL | 6 | |
| 636010F32272 | BALL PREPARATION TOOL | 1 | |
| 63610FE380190 | COMPRESSION TOOL | 1 | |
| 63621FE380190 | SPRING COMPRESSION TOOL | 1 | |
| 63626FE380190 | PROTECTION TOOL | 1 | |
| 636GSE2006-901 | PROTECTOR TOOL | 3 | |
| 63811-7800 | Hand Crimp Tool, UL Approved | 1 | |
| 63811-7900 | Hand Crimp Tool, UL Approved | 4 | |
| 63811-8300 | Hand Crimp Tool, UL Approved | 1 | |
| 63817-0400 | Precision Stripper Tool suitable for cable diameters up to 11.00mm | 1 | |
| 63819-4800 | Hand Tool for 1.20mm Crimp Terminals, 28 AWG Wire for Reeled Product | 1 | |
| 63819-9600 | Hand Crimp Tool For Projector Lamp Plug and Receptacle Terminal | 1 | |
| 63823-0100 | Hand Tool for 1.20mm Crimp Terminals, 30 AWG Wire for Reeled Product | 1 | |
| 63823-3900 | Hand Crimp Tool for Splash Proof Crimp Terminal | 1 | |
| 63824-0200 | Extractor Tool for .093 and HCS-125 Product Series | 1 | |
| 64-CGMP | MICROPRESS TOOL | 3 | |
| 64001-0100 | PremiumGrade™ Hand Crimp Tool | 1 | |
| 64001-0200 | PremiumGrade™ Hand Crimp Tool | 1 | |
| 64001-4500 | PremiumGrade™ Hand Crimp Tool | 1 | |
| 64001-7400 | PremiumGrade™ Hand Crimp Tool | 1 | |
| 64003-0100 | PremiumGrade™ Hand Crimp Tool | 1 | |
| 64016-0040 | ServiceGrade™ Wire Strip Tool – Non-Ratcheting Spring Loaded | 1 | |
| 64CGMP | COMPRESSING TOOL,SPLICING SLEEVE | 3 | |
| 65-44836-T1 | Pressing Tool | 1 | |
| 65-7-01FE174 | SPRING COMPRESSION TOOL | 1 | |
| 65012T2 | PRESSING TOOL | 1 | |
| 651NHG | PRESSURE GAUGE TOOL | 1 | |
| 6552-S54-1 | ARBOR PRESS TOOLING | 1 | |
| 65572-T1 | PRESSING TOOL | 2 | |
| 65572T001 | PRESSING TOOL | 1 | |
| 65572T002 | PRESSING TOOL | 1 | |
| 65572T1 | Pressing Tool | 2 | |
| 65572T2 | Pressing Tool | 2 | |
| 655A100-A | TOOLVERTICAL TAIL TIP FAIRING SPREADER | 1 | |
| 65606T200 | PRESSING TOOL | 1 | |
| 657-02FE209-000 | SPRING CIMPRESSION TOOL | 1 | |
| 657-02FE250-000 | SPRING COMPRESSION TOOL | 1 | |
| 657.02FE25000 | SPRING COMPRSSION TOOL | 1 | |
| 65702-FE209-000 | SPRING COMPRESSION TOOL | 1 | |
| 65702FE240-002 | SPRING COMPRESSION TOOL | 1 | |
| 65702FE250000 | SPRING COMPRESSION TOOL | 1 | |
| 65885T1 | PRESSING TOOL | 1 | |
| 65E01085 | TOOL BOX PROTABLE | 1 | |
| 65E01086 | TOOL BOX PROTABLE | 1 | |
| 65E01087 | TOOL BOX PROTABLE | 1 | |
| 66-0410 | STATIC DISCH TEST PROBE(POSITION TOOLING) | 11 | |
| 66-163 | HELICAL SPRING INSTAL- LATION TOOL | 1 | |
| 66-225 | DISK SPRING PRESET TOOL | 1 | |
| 66-48 | STOP AND DISC SPRING REGISTER ADJUSTMENT TOOL | 1 | |
| 6635T4 | TOOL: SPRING DIAL COMPRESS | 1 | |
| 66731-1 | TOOL - ADAPTER, PRESSURE TEST VALVE, C37099-103 | 2 | |
| 6796080-201 | TOOL, SEPARATOR T-56 COMPRESSOR | 1 | |
| 6796080-202 | TOOL, SEPARATOR T-56 COMPRESSOR | 1 | |
| 68-3 | PUSHROD SPRING COMPRESSOR TOOL | 12 | |
| 68428- T1 | PRESSING TOOL | 1 | |
| 68428- T1PM | PRESSING TOOL | 1 | |
| 68428T1 | PRESSING TOOL | 1 | |
| 68428T1PM | PRESSING TOOL | 1 | |
| 69001369-001 | TOOL-PRESSURE TEST,ACT | 1 | |
| 69001378-001 | TOOL-PRESSURE TEST,ACT | 1 | |
| 6914V-SD | STANDARD SCRADER VALVE TOOL, TO REMOVE CORE OF PRESSURE TEST VALVE. | 1 | |
| 697391-3 | PRETENSIONING TOOL | 1 | |
| 69841T201 | PRESSING TOOL (INSTALLATION) | 1 | |
| 69841T202 | PRESSING TOOL (REMOVAL) | 1 | |
| 6AA617-6325-001 | RESOLVER STATOR WINDING PRESS TOOL | 1 | |
| 6F | PRESSURE BLANK TOOL | 1 | |
| 6F6300G00131 | MGB PRESERVATION ADAPTER TOOL | 1 | |
| 6M | PRESSURE BLANK TOOL | 1 | |
| 6MMFLEX | 6MM FLEXI BORESCOPE PROBE TOOL | 1 | |
| 6PRE65B00161-1 | TOOL PROTECTOR ROSCA | 3 | |
| 700-T-091-19 | PRESSURE TEST TOOL | 1 | |
| 700-T-091-9 | PRESSURE TEST TOOL | 1 | |
| 70642177-ALL | APU DMM PROGRAMMING TOOL | 1 | |
| 711300-15 | PRESSURE RELIEF DOOR LATCH TOOL | 1 | |
| 720Z3598-5 | 787 XLS ARM SPRING TOOL | 1 | |
| 7261-06 | TOOL BAG, PROTECTIVE COVERS | 1 | |
| 74_Z-0-0-68 | TOOL OTHER BLADE WITH, PROTECTOR, COAXIAL | 1 | |
| 75-32-14 | Protection Tool | 1 | |
| 75515M | HELICOIL HAND INSERTING TOOL, PREWINDER | 1 | |
| 75516M | HELICOIL HAND INSERTING TOOL, PREWINDER | 1 | |
| 7552-4 | THREAD INSERT HAND INSTALLATION TOOL: 1/4-28, PREWINDER & TYPE II PREWINDER | 9 | |
| 7552-7 | THREAD INSERT HAND INSTALLATION TOOL: 7/16-20, PREWINDER & TYPE II PREWINDER | 1 | |
| 762-155 | NOSE GEAR DOWNSPRING DISASSEMBLY/REASSEMBLY TOOL | 1 | |
| 762-157 | NOSE GEAR DOWNSPRING REMOVE/INSTALL TOOL | 1 | |
| 7878SF | SEAT FEET PROTECTIVE GUARDS TOOLING | 1 | |
| 79000660-1 | TOOL, KPA 900 CONFIGURATION MODULE PROGRAMMER | 1 | |
| 79001401-1 | PISTON OD PACKING SIZING TOOL (USED TO PROTECT PISTON ID PACKINGS DURING INSTALLATION OF ADJUSTER PIN (WILL PERFORM SAME FUNCTION AS PN 2558900-2)) | 1 | |
| 79001898-1 | ARBOR PRESS GREASE FITTING INSTALLATION TOOL | 1 | |
| 798001898-1 | ARBOR PRESS GREASE FITTING INSTALLATION TOOL | 1 | |
| 7AA617-6325-001 | GIMBAL HOUSING PRESS SUPPORT TOOL | 1 | |
| 7C2200P03 | TOOL - PRESSURE HOSE | 1 | |
| 8-757-01 | PROXIMITY SENSOR TESTER - GO-GAUGE ( USED AS DEACTUATOR TOOL ONLY & IS PART OF TEST SET KHT8-758-01 ) | 1 | |
| 8-758-01 | SENSOR PROXIMITY TEST KIT - GO-GAUGES (USED AS DEACTUATOR TOOL KIT ONLY) | 7 | |
| 8-758−01 | TOOL-SET - PROX SNSR( UOI TBD) | 7 | |
| 8011489-508 | BY-PASS VALVE COMPRESSION TOOL | 1 | |
| 8011516-508 | PRELOADED NUT CRIMPING TOOL | 1 | |
| 8011520-508 | COMPRESSIONTOOL | 1 | |
| 8012232-508 | COMPRESSION TOOL | 1 | |
| 8012237-508 | COMPRESSION AND DECOMPRESSION TOOL | 1 | |
| 801888-308 | COMPRESSION AND DECOMPRESSION TOOL | 1 | |
| 801900-308 | END FITTING COMPRESSION TOOL | 1 | |
| 801908-308 | COMPRESSION TOOL | 1 | |
| 807-102-000-011 | TOOL, ICE DETECT PROB | 5 | |
| 807670-508 | TOOL-COMPRESSION/DECOMPRESSION | 1 | |
| 8077A | CRANKSHAFT HANGER BLADE BUSHING REMOVAL/INSTALLATION TOOL FABRICAR O COMPRAR | 1 | |
| 810-45-135030-9 | SERIES REFERENCE: 1077. NOMENCLATURE: TRIM TAB FREE PLAY CHECK FIXTURE. SPECIFICATIONADDITIONAL DATA: LOCAL MANUFACTURE PER APPROPRIATE MM ATA 27 AS ALTERNATE TOOL. CALIBRATED DIAL INDICATOR MUST BE WITH UNIT FOR USE. ATA: 270055 | 1 | |
| 81200160 | 95/6 A PRO - TTS95 TOOL TROLLEY - ANTHRACITE | 1 | |
| 81200161 | 95/6 B PRO - TTS95 TOOL TROLLEY - BLUE | 1 | |
| 81200162 | 95/6 R PRO - TTS95 TOOL TROLLEY - RED | 1 | |
| 81200163 | 95/7 A PRO - TTS95 TOOL TROLLEY - ANTHRACITE | 1 | |
| 81200164 | 95/7 B PRO - TTS95 TOOL TROLLEY - BLUE | 1 | |
| 81200165 | 95/7 R PRO - TTS95 TOOL TROLLEY - RED | 1 | |
| 81200166 | 95/8 A PRO - TTS95 TOOL TROLLEY - ANTHRACITE | 1 | |
| 81200167 | 95/8 B PRO - TTS95 TOOL TROLLEY - BLUE | 1 | |
| 81200168 | 95/8 R PRO - TTS95 TOOL TROLLEY - RED | 1 | |
| 81200169 | 98/7 A - PRO-TTS TOOL TROLLEY 7DWR ANTHRACI | 1 | |
| 81200170 | 98/7 B - PRO-TTS TOOL TROLLEY 7DWR BLUE | 1 | |
| 81200171 | 98/7 R - PRO-TTS TOOL TROLLEY 7DWR RED | 1 | |
| 81200172 | 98/8 A - PRO-TTS TOOL TROLLEY 8DWR ANTHRACI | 1 | |
| 81200173 | 98/8 B - PRO-TTS TOOL TROLLEY 8DWR BLUE | 1 | |
| 81200174 | 98/8 R - PRO-TTS TOOL TROLLEY 8DWR RED | 1 | |
| 831552-1 | TOOL, BUNGEE SPRING | 1 | |
| 834015-1 | PRESS TOOL | 1 | |
| 834016-1 | PRESS TOOL | 1 | |
| 834019-1 | PRESS TOOL | 1 | |
| 834105-1 | PRESS TOOL | 1 | |
| 834220-1 | SPRING INSTALLING TOOL | 1 | |
| 834220-1PM | SPRING INSTALLING TOOL | 1 | |
| 834311-1 | Bearing Press Tool | 1 | |
| 834708-1 | TOOL: COMPRESSOR & GEARBOX | 1 | |
| 834815-1 | LOAD COMPRESSOR CENTERING TOOL | 2 | |
| 835012-1 | SPRING INSTALLATION TOOL | 1 | |
| 835364-2 | PIN PRESSING TOOLING | 1 | |
| 835424-1 | SPRING COMPRESSION TOOL | 1 | |
| 835695-1 | DPV PRESS SWITCH TOOL | 1 | |
| 835844-1 | Pin Press Tool | 1 | |
| 8400PCK | TOOL PROCESS PIN | 1 | |
| 8500C | 2) CHADWICK HELMUTH 8500C PROPELLER BALANCING TOOL | 4 | |
| 85101-FE174-500 | TANK PRESSURE TOOL | 1 | |
| 85101-FE233-100 | Proof Check Tool | 1 | |
| 85101-FE27721001 | TANK PRESSURE TOOL | 1 | |
| 85101-FE277211001 | Tank Pressure Tool | 1 | |
| 85101-FE374101 | TANK PRESSURE TOOL | 1 | |
| 85101FE374401200 | TANK PRESSURE TOOL | 1 | |
| 85201-FE24050001 | PRESSURE CHECK TOOL | 1 | |
| 85201FE209-500 | TEST TOOL FOR THE PRESSURE REDUCING VALVE | 1 | |
| 85202-FE209-00012 | TANK PRESSURE TOOL | 1 | |
| 85208FE20900012 | TEST TOOL FOR THE GAS BOTTLE PRESSURE | 1 | |
| 856A1062G03 | TOOL-SET COMPR STATOR SECTORS | 6 | |
| 856A1063 | TOOL - SET COMPR STATOR SECTORS & LINERS INSTALLATION | 1 | |
| 856A1063G01 | TOOL - SET COMPR STATOR SECTORS & LINERS INSTALLATION | 1 | |
| 856A1063G02 | TOOL - SET COMPR STATOR SECTORS & LINERS INSTALLATION | 1 | |
| 856A1063G03 | TOOL - SET COMPR STATOR SECTORS & LINERS INSTALLATION | 3 | |
| 856A1063G04 | TOOL - SET COMPR STATOR SECTORS & LINERS INSTALLATION | 1 | |
| 856A1063G05 | TOOL - SET COMPR STATOR SECTORS & LINERS INSTALLATION | 3 | |
| 856A1063G06 | TOOL-SET COMPR STATOR SECTORS & LINERS INSTALLATION | 5 | |
| 856A1063G07 | TOOL - SET COMPR STATOR SECTORS & LINERS INSTALLATION | 8 | |
| 856A1063G07 | TOOL-SET COMPR STATOR SECTORS & LINERS INSTALLATION | 8 | |
| 856A1071 | TOOL SET,REMOVAL - COMPR STATOR LINERS & VANE SEGMENTS | 1 | |
| 856A1071G01 | TOOL SET,REMOVAL - COMPR STATOR LINERS & VANE SEGMENTS | 1 | |
| 856A1071G02 | TOOL SET,REMOVAL - COMPR STATOR LINERS & VANE SEGMENTS | 1 | |
| 856A1071G03 | TOOL SET,REMOVAL - COMPR STATOR LINERS & VANE SEGMENTS | 1 | |
| 856A1071G04 | TOOL SET,REMOVAL - COMPR STATOR LINERS & VANE SEGMENTS | 1 | |
| 856A1071G05 | TOOL SET,REMOVAL - COMPR STATOR LINERS & VANE SEGMENTS | 2 | |
| 856A1071G06 | TOOL SET,REMOVAL - COMPR STATOR LINERS & VANE SEGMENTS | 7 | |
| 856A1071G07 | TOOL SET, REMOVAL COMPRESSOR STATOR LINERS AND VANE SEGMENTS | 1 | |
| 856A1115G07 | TOOL: MANIFOLD,CART PRESS | 15 | |
| 856A1115P04 | FUEL MANIFOLD PRESSURE CHECK TOOL | 1 | |
| 856A1171G03 | TOOL-FIXTURE PRESSURE TEST | 1 | |
| 856A1171G06 | TOOL-FIXTURE PRESSURE TEST | 2 | |
| 856A1186G03 | TOOL/SENSOR PROBE | 3 | |
| 856A1252G02 | TOOLINSTALLATION SELF WRENCHING BOLTS COMPRESSOR ROTOR | 5 | |
| 856A1292G01 | PRY BAR TOOL SET | 1 | |
| 856A1403 | TOOL SET, PROTECTOR HPT | 1 | |
| 856A1403G02 | TOOL SET PROTECTOR HPT | 7 | |
| 856A1454 | EXTENSION SHAFT HTPR TOOL | 1 | |
| 856A1454G01 | EXTENSION SHAFT HTPR TOOL | 11 | |
| 856A1456 | TOOL SET REMOVE HPTR BLADE & DMPRS | 1 | |
| 856A1456G02 | TOOL SET REMOVE HPTR BLADE & DMPRS | 5 | |
| 856A1467G01 | FUEL MANIFOLD ADAPTER PRESS CK FUEL TOOL | 7 | |
| 856A1480G01 | ENGINE PRESERVATION UNIT TOOL | 13 | |
| 856A1717P01 | TOOL KIT, PRESERVATION | 3 | |
| 856A1717P02 | TOOL KIT, PRESERVATION | 2 | |
| 856A1810P01 | REMOVAL TOOL, NOZ SEGMENT RETAIN (DAC CONFIG 01 PRE SB 72-0209) | 1 | |
| 856A1885 | TOOL SET,REMOVAL-COMPR STATOR LINERS&VANE SEGMENTS | 1 | |
| 856A1885G01 | TOOL SET, REMOVAL COMPR VAN | 2 | |
| 856A2004 | TOOL, ASSEMBLY - INSTALL/REMOVE HPTR TO COMPRESSOR ROTOR NUTS | 1 | |
| 856A2004G01 | TOD, ASSEMBLY - LNSTALL/ RENIOVE HPTR TO COMPRESSOR ROTOR NUTS (ASSEMBLY TOOL) | 1 | |
| 856A2004G02 | Tool, Assembly - Install/Remove HPTR to Compressor Rotor Nuts (assembly tool) | 6 | |
| 856A2406G01 | Pressure Tool Inflatable Blds | 1 | |
| 856A2406G02 | TOOL: TOOL-PRESSURE INFLAT | 1 | |
| 856A2406G04 | TOOL-PRESSURE INFLAT | 1 | |
| 856A2537 G01 | PROTECTING MOUTING PIN TOOL | 17 | |
| 856A2537G01 | PROTECTING MOUNTING PIN TOOL | 17 | |
| 856A2600G07 | LOW PRESSURE TURBINE SHAFT GUIDE & STOP TOOL | 11 | |
| 856A2828 | TOOL PRESSURE TEST | 1 | |
| 856A2828G01 | TOOL PRESSURE TEST | 1 | |
| 856A2946G01 | TOOL PROTECTIVE FAN DISK RING | 12 | |
| 856A2948 | PRESSURE TOOL,INFLATION FAN BLADES (220V/50HZ) | 1 | |
| 856A2948G02 | PRESS TOOL INFL | 1 | |
| 856A2966G01 | PRESS TOOL SET MAJOR MODULE SEAL | 4 | |
| 856A3388G01 | Tool, Remove Spring Washer | 1 | |
| 856A3487G02 | FIXTURE # BALL BEAR.4 THE TOOL IS USED TO PROTECT THE NO. 4 BALL BEARING | 4 | |
| 856A3524G01 | BOOSTER & LOW PRESSURE TURBINE DRIVE ADAPTER TOOL SET | 14 | |
| 856A3594G02 | PRESSURE GAUGE TOOLSET LEAK AGB | 4 | |
| 856A3630 | PRESSURE TOOL INFLATABLE FAN BLADES INNER PATCH (220V) | 1 | |
| 856A3630G01 | Pressure Tool | 1 | |
| 856A3633G01 | TOOL PRESSURE TEST | 1 | |
| 856A3755 | TOOL, FOOLPROOF INSTALL LPT STG 1 & AIR SEAL | 1 | |
| 856A3755P01 | Tool, Fool-Proof LPT Stage 1-2 Rot. Air Seal Install | 6 | |
| 856A3942 | TOOL PRESSURE TEST | 1 | |
| 856A4002G01 | TOOL SET, PRESSURE CHECK - FUEL MANIFOLDS (PRESSURE CHECK KIT) | 2 | |
| 856A4325G01 | TOOL, GRINDING-CPRSR STATOR CASE | 1 | |
| 856A4627G03 | TOOL - INSPECTION, PRESSURE FACES, DOVETAIL, FAN DISK, INCH UNITS | 5 | |
| 856A4628G01 | tool inspection, pressure faces, dovtail, fan | 9 | |
| 856A4628G02 | TOOL- INSPECTION, PRESSURE FACES, DOVETAIL, FAN BLADE, MISSING COATING, MM UNITS | 8 | |
| 856A4633G02 | TOOL - INSPECTION, PRESSURE FACES, DOVETAIL, FAN BLADE, MISSING COATING, MM UNITS | 13 | |
| 856A6634G01 | ULTRASONIC INSPECTION TOOL FAN DISK PRESSURE FAEC DOVETAILS | 1 | |
| 856A6762 | PRESSURE TOOL INFLATABLE - FAN BLADES ADRADABLE LINER | 1 | |
| 856A6762G01 | PRESSURE TOOL INFLATABLE - FAN BLADES ABRADABLE LINER | 1 | |
| 856A6762G02 | PRESSURE TOOL INFLATABLE - FAN BLADES ABRADABLE LINER | 1 | |
| 856A6762G03 | PRESSURE TOOL INFLATABLE - FAN BLADES ABRADABLE LINER | 1 | |
| 856AI063 | TOOL - SET COMPR STATOR SECTORS & LINERS INSTALLATION | 1 | |
| 856AI07I | TOOL SET,REMOVAL - COMPR STATOR LINERS & VANE SEGMENTS | 1 | |
| 8605150S02 | WIRING TOOL - PROCEDURE | 3 | |
| 860PSI | PRESSURE GAUGE TOOL | 1 | |
| 865A1115 | MANIFOLD PRESSURE CHECK TOOL | 1 | |
| 881-8-268-000 | PRESS TOOL | 1 | |
| 8812 954 000/PHP | PROTECTING TOOL | 1 | |
| 8812 954000/PHP | PROTECTOR TOOL | 1 | |
| 8812954000 | PROTECTOR TOOL | 2 | |
| 8812954000/PHP | PROTECTOR TOOL | 1 | |
| 8814157000 | SPRAY TOOL | 2 | |
| 8815010000 | PROTECTION TUBE HOLD TOOL | 2 | |
| 881600AT2 | ASSEMBLY TOOL, PRESSURE SEAT | 1 | |
| 8816584000 | PROTECTION TOOL | 1 | |
| 8818337000 | OIL PRESSURE TOOL | 1 | |
| 8818870000 | GENERATING TOOL HYDRAULIC PRESSURE | 1 | |
| 8819387000 | TOOL USED TO DO INSPECTION AND CHECK PROCEDURES OF THE PRESSURE SWITCHES. | 4 | |
| 8819389000 | TOOL USED TO DO INSPECTION AND CHECK PROCEDURES OF THE PRESSURE SWITCHES. | 5 | |
| 8819795000 | TOOL USED TO DO INSPECTION AND CHECK PROCEDURES OF THE PRESSURE SWITCHES. | 3 | |
| 88362-000 | PRESSURE ROLLER ALIGNMENT TOOL | 1 | |
| 895-3130-02-101 | PRESSING TOOL,BUSHING | 1 | |
| 8C2168 | TOOL KIT – ELECTRONIC PROTRACTOR VSV | 1 | |
| 8C2717 | FIXTURE - RMV/INST FWD OUTER SEAL - LITE (PRODUCTION TOOL) | 1 | |
| 8C2720 | FIXTURE,RESTRAIN - COMPRESSOR ROTOR, AFT (SERVICE SHOP TOOL ONLY) | 1 | |
| 8D3-20 | 8MM FLEXI BORESCOPE PROBE TOOL | 1 | |
| 8DFT65B00116 | PROOF LOAD TEST TOOL | 1 | |
| 8F | PRESSURE BLANK TOOL | 1 | |
| 8G6320A00132A023A | SPRING SEAL INSTALLATION TOOL | 1 | |
| 8M | PRESSURE BLANK TOOL | 1 | |
| 8MIT65B01503 | TOOL, COMPRESSION - CAP RING, ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 3 | |
| 900-0014-001 | DRIVE SPRING WINDING TOOL | 1 | |
| 90035-3 | DOUBLE ACTION HAND TOOL PREM. | 1 | |
| 901-13590-3 | PROPELLER BALANCER TOOL | 3 | |
| 901-14990 | PROP BALANCING TOOL | 2 | |
| 901-610S | CURRENT PROBE TOOL | 1 | |
| 90432802 | Protective cover for Tool trolley | 1 | |
| 90800-1 | PROCRIMPER TOOL & DIE | 2 | |
| 90869-1 | CRIMP TOOL - AMP (PROCRMP TL W/DIE COMM .062 P/S) | 1 | |
| 91387-1 | PRO-CRIMPER TOOL & DIE | 1 | |
| 91388-1 | PRO-CRIMPER TOOL & DIE | 1 | |
| 91504-1 | PREMIUM CRIMP TOOLING | 4 | |
| 9200GSB | PROPELLER SHOP TOOLS SET | 3 | |
| 928A690-1 | PRESS TOOL SPACER | 1 | |
| 92955A111 | PRONG BREAK-OFF TOOL | 1 | |
| 933A305-1 | PILOT COMPRESSION TOOL | 1 | |
| 940A684 | CHECK FIXTURE SPREADER ARM TOOL | 1 | |
| 9446M61G09 | PROGRAM TOOL | 1 | |
| 9446M61G10 | PROGRAM, BALANCE-BLADE INSTALLATION TOOL | 1 | |
| 9470M55G02 | BLADE PROGRAMME TOOL | 1 | |
| 9480M20G03 | PRESSURE TEST TOOL | 1 | |
| 95-92 | PRESSURE GAUGE KIT - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 95-92054-0003 | LH ELEVATOR TAB PROTRACTOR - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 95-92134-0001 | PRESSURE GAUGE KIT - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 956A1176 | TOOL KIT - ADAPTER - ELECTRONIC PROTRACTOR VSV | 1 | |
| 956A1176G01 | ELECTRONIC PROTRACTOR VARIABLE STATOR VANE (VSV) ADAPTER TOOL KIT | 1 | |
| 956A1178 | TOOL KIT - ELECTRONIC PROTRACTOR - IGV | 1 | |
| 956A1264 | TOOL SET - REMOVE-COMPRESSOR STATOR SHROUD PINS | 1 | |
| 956A1602P01 | PRESERVATION TOOL- ENGINE | 5 | |
| 956A1602P02 | PRESERVATION TOOL- ENGINE | 1 | |
| 956A7643 | TOOL SET - PROTECTOR - TURBINE REAR FRAME ARM | 1 | |
| 956A8089P06 | KIT, PROTECTOR - FAN DISK (NEW TOOL | 1 | |
| 9631000-0901 | PRESSURE CHECK TOOL | 1 | |
| 965583-10 | AA-400 SUPER HEATER COMPRESSED-AIR HEATING TOOL | 1 | |
| 968-27237-04 | SWAGING PRESS TOOL | 1 | |
| 9682723704 | SWAGING PRESS TOOL | 1 | |
| 970506-01 | ARBOR PRESS LOWER TOOL | 1 | |
| 970506-02 | ARBOR PREESS UPPER TOOL | 1 | |
| 97A21102505000 | BLANKING TOOL-CABIN PRESSURE TESTING | 4 | |
| 97A21102506000 | BLANKING TOOL-CABIN PRESSURE TESTING | 3 | |
| 97A28002117003 | TEST TOOL, PRESSURE | 1 | |
| 97A29002500000 | TOOL: PROTECTOR RAM AIR 5100 | 6 | |
| 97A29102035000 | CONNECTOR PRESSURIZING TOOL HYDRAULIC TANK | 21 | |
| 97A29102061000 | PROTECTIVE TOOL | 4 | |
| 97A29102062000 | CONNECTOR/DEPRESSURIZ. TOOL | 29 | |
| 97A76102003000 | TOOL: SPRINGSCALE | 8 | |
| 97A76102008000 | TOOL: ADAPTER SPRING SCALE 5100 | 1 | |
| 97F2610300000 | TEST TOOL - PRESSURE, FIRE EXTINGUISHING BOTTLE | 1 | |
| 97F26103000000 | TEST TOOL-PRESSURE,FIRE EXTINGUISHING BOTTLE | 6 | |
| 97F52001000020 | CHECK TOOL - PROXIMITY SENSOR | 2 | |
| 97F52001000046 | CHECK TOOL PROXIMITY SENSOR EQUIPPED BOX | 1 | |
| 97F57508704000 | RPRTOOL REPAIR-TOOL,FAIRING 3 | 4 | |
| 97F57508704001 | RPRTOOL REPAIR-TOOL,FAIRING 2 | 1 | |
| 97F57508704003 | RPRTOOL REPAIR-TOOL,FAIRING 4RH | 3 | |
| 98000F29001002000 | Surge Tank Pressurization (3 tools set) | 1 | |
| 98830192 | 95/157QR - 95/7 A PRO TOOL TROLLEY + 157PC TOOL SET | 1 | |
| 98830194 | WB621/161QR - WORKBENCH WB621 + 161PC PREMIUM TOOL SET | 1 | |
| 98A10001005000 | COVER - SLIP-ON PITOT PROBE (TOOL) | 30 | |
| 98A21102506000 | BLANKING TOOL-CABIN PRESSURE TEST | 1 | |
| 98A21203500000 | TOOL,PRESSURIZING-APU BLEED AIR SYSTEM | 3 | |
| 98A27003003000 | RETAINING TOOL - PRE-STRETCHING TENSION REGULATOR | 5 | |
| 98A27103500000 | PROTECTION TOOL-FTU | 7 | |
| 98A27103500001 | PROTECTION TOOL-FTU | 7 | |
| 98A27103500002 | PROTECTION TOOL-FTU | 1 | |
| 98A27103500003 | PROTECTION TOOL-FTU | 1 | |
| 98A27309007000 | ASSEMBLY TOOL FOR OVERPRESSURE DEVICE | 1 | |
| 98A27403000000 | MESURE EFFORT SUR VOLANT TRIM PROFONDEUR TOOL-LOAD MEAS,PITCH TRIM CTL WHEEL | 4 | |
| 98A27504022100 | SEAL COMPRESSING TOOL | 1 | |
| 98A27508006000 | TOOL RI SPRING UNIT | 2 | |
| 98A27508006040 | REMOVAL/INSTALL.TOOLS SPRING-V.TR.2 | 1 | |
| 98A27508006042 | REMOVAL/INSTALL.TOOLS SPRING-V.TR.4 | 1 | |
| 98A27508033000 | TOOL SET STA LOC, FLAP VANE SPRING ATTACHMENT, SL90-PN | 1 | |
| 98A27508375000 | TOOL - SPRING UNIT, VANE TRACK 2 AND 4 | 1 | |
| 98A27508679000 | TOOL-R I,SPRING VANE | 1 | |
| 98A27508679040 | REMOVAL/INSTALLATION TOOLS SPRING VANE TRACK 2 | 1 | |
| 98A27508679042 | REMOVAL/INSTALLATION TOOLS SPRING VANE TRACK 4 | 1 | |
| 98A27604013000 | COMPRESSION TOOL | 1 | |
| 98A28104031001 | TOOL REQ PUMP - SUCTION (ATEX APPROVED) | 10 | |
| 98A49107504001 | APU THREAD PROTECT TOOL | 33 | |
| 98A520-03500 | SPRING COMPRESSION TOOL | 1 | |
| 98A52208001234 | SPRING ROD (PART OF TOOL SET 98A52208001001) | 1 | |
| 98A54303000000 | SETTING TOOL-FWD PRESSURE RELIEF DOOR | 1 | |
| 98A54403019000 | PROTECTIVE PAD TOOL | 8 | |
| 98A54503000000 | SETTING TOOL-AFT PRESSURE RELIEF DOOR | 1 | |
| 98A54503001000 | SETTING TOOL-AFT PRESSURE RELIEF DOOR | 1 | |
| 98A76103500000 | RINGS AND COMPRESSED SPRINGS HOLDING TOOL | 1 | |
| 98AMS172333002 | TOOL SET-R I,THS OR ADAPTER-WRENCH - PRIMARY PINS | 13 | |
| 98C7810H023-000 | FINGER SEAL PROTECTION TOOL | 1 | |
| 98C7830H029-000 | REVERSE PUSH SUPPRESSION TOOL | 1 | |
| 98D10103500043 | CAPT & F-O STATIC PROBE CVR TOOLING | 13 | |
| 98D10103501000 | COVER - ICE DETECTION PROBE ( THIS TOOL IS USED TO PROTECT THE TWO ICE DETECTION PROBES. ) | 23 | |
| 98D229003501000 | FILL UNIT-AIR PRESSURIZING TOOL, HYDRAULIC RESERVOIR | 1 | |
| 98D26203002006 | TEST TOOL ENG. FIRE PROT. SYS. | 13 | |
| 98D27303018000 | ADJUSTMENT TOOL-SPRING LENGTH ROLL | 1 | |
| 98D27803500001 | TOOL ZERO LOCKING FLAP? 3D PRINT | 35 | |
| 98D27803500002 | TOOL ZERO LOCKING FLAP，3D PRINT | 6 | |
| 98D28108417000 | TEST TOOL-PRESSURE,ACT | 1 | |
| 98D28108658000 | TOOL-PRESSURE TEST,ACT | 11 | |
| 98D28108658040 | ACT PRESSURE TEST TOOL 1 & 2 | 1 | |
| 98D28108658042 | ACT PRESSURE TEST TOOL 3 | 1 | |
| 98D29003501000 | FILL UNIT-AIR PRESSURIZING TOOL, HYDRAULIC RESERVOIR | 22 | |
| 98D290035010003 | FILL UNIT-AIR PRESSURIZING TOOL, HYDRAULIC RESERVOIR | 1 | |
| 98D29003501003 | FILL UNIT-AIR PRESSURIZING TOOL, HYDRAULIC RESERVOIR | 17 | |
| 98D32104028000 | Compression Tool | 2 | |
| 98D32203000000 | SPRING ROD-MAINTENANCE TOOL | 1 | |
| 98D32403007200 | MLG AXLE BRAKE PROTECTOR TOOL | 21 | |
| 98D34103007000 | AOA PROBE TESTER-TOOL | 9 | |
| 98D34203003000 | AOA PROTECTION TOOL | 5 | |
| 98D35208729000 | TOOL-DPRSS,TEST O2 | 8 | |
| 98D35208729001 | TOOL DEPRESS. TEST PORT O2 | 9 | |
| 98D35208729001 | Tool -D,press TES-02 iss1 | 9 | |
| 98D35208729040 | TOOL DPRSS TEST PROT-O2 | 1 | |
| 98D36003000000 | TOOL-ENGINE BLEED SYST.TEST, OVERPR. VLV | 6 | |
| 98D52003002000 | TOOL-COVER PLATE PRE-CRUSHING | 15 | |
| 98D54003004000 | TRANSPRT TRANSPORTATION TOOL | 1 | |
| 98D56003001000 | AILERON/FUSELAGE HINGE PRESSURE APPLY TOOL | 4 | |
| 98D56103003000 | RUDDER/FUSELAGE HINGE PRESSURE APPLY TOOL | 19 | |
| 98D7810H009-000 | FINGER SEAL PROT TOOL | 1 | |
| 98E2104021001 | TOOL COMPRESSION | 1 | |
| 98F10001001000 | COVER-STATIC PROBE (TOOL/HZ-HMS) | 17 | |
| 98F25308363000 | TOOL - PROTECTION, WASTE TANK | 1 | |
| 98F26203000004 | FIRE SYSTEM PRESS TEST KIT TOOL | 6 | |
| 98F26203000010 . | FIRE SYSTEM PRESS TEST KIT TOOL | 11 | |
| 98F28109007000 | RING PRO TOOL | 8 | |
| 98F28109018000 | Pressure Transducer Tool | 3 | |
| 98F29103003000 | TOOL: ENGINE OPRN SI | 7 | |
| 98F29103500000 | THIS TOOL IS USED TO PRESSURIZE ACCUMULATORS. | 20 | |
| 98F30403001000 | RAIN REPELLENT PRES.(RAIN REPELLENT PRESSURIZATION TOOL) | 11 | |
| 98F32001006000 | HIGH PRESS FILLING TOOL | 13 | |
| 98F32104021000 | TOOL - COMPRESSION | 5 | |
| 98F32104021001 | TOOL - COMPRESSION | 8 | |
| 98F32104044000 | TOOL - COMPRESSION | 1 | |
| 98F321O4044000 | TOOL- COMPRESSION | 1 | |
| 98F341 | FLUSHING TOOL-PITOT PROBE | 1 | |
| 98F34103000000 | ADAPTER-COVER STATIC PROBE (TOOL) | 16 | |
| 98F34103001000 | ADAPTER-PITOT PROBE TOOL | 16 | |
| 98F34103003000 | FLUSHING TOOL-PITOT PROBE | 28 | |
| 98F34103003000 | TOOL-PITOT PROBE | 28 | |
| 98F34103003000(REV.B) | FLUSHING TOOL-PITOT PROBE | 1 | |
| 98F341030030000 | PITOT PROBE FLUSHING TOOL | 1 | |
| 98F341030030001 | FLUSHINGTOOL-PITOTPROBE | 1 | |
| 98F36003002001 | TEST TOOL PROX SENSORS | 2 | |
| 98F36003005000 | PRECOOLER R/I TOOL | 3 | |
| 98F55109006000 | R-I TOOL, THS APRON | 12 | |
| 98F55109006040 | R-I TOOL, THS APRON LH | 1 | |
| 98F55109006041 | R-I TOOL, THS APRON RH | 1 | |
| 98F57103021000 | WBI - PRE REWORKED TOOL | 1 | |
| 98F57103021001 | WBI - PRE REWORKED TOOL | 1 | |
| 98F71201010000 | APPROACH TOOL | 14 | |
| 98K7810H009-000 | FINGER SEAL PROTECTION TOOL | 1 | |
| 98L07104005000 | JACKING TOOL ASSEMBLY PRIMARY SPIGOT | 2 | |
| 98L52403000000 | COMPRESS TOOL-DOOR JACK | 1 | |
| 98L54503001000 | TOOL RI PYLON PROTECTION | 2 | |
| 98L71203000044 | PROTO FED TOOL | 1 | |
| 98L7810H014-000 | PROTECTION TOOL-FINGER SEAL | 1 | |
| 98N7810H003-000 | FINGER SEAL PROTECTION TOOL | 1 | |
| 98S12003000000 | WATER DRAIN PRUGE TOOL | 12 | |
| 98S26005000000 | CARGO COMPT AIR PROOF MEASUREMENT TOOL | 6 | |
| 98S27005012001 | TOOL BLOCK PROF | 1 | |
| 98S27005016000 | TOOL CABLE TENSION REGULATOR PRE-MOD.2634 | 2 | |
| 98S27105002000 | AILERON BLOCKING TOOL (SPRG TAB) | 4 | |
| 98S27105007000 | TOOL BLOCK PROF ATR 72 | 1 | |
| 98S27305009-000 | DRILLING TOOL FOR SPRING TAB RETROFIT | 1 | |
| 98S32005006 | NLG SHOCK ABSORBER COMPRESS TOOL | 1 | |
| 98S32005006000 | NLG SHOCK ABSORBER COMPRESSION TOOL | 1 | |
| 98S32005006000 | TOOL TO COMPRESS NLG SHOCK ABSORBER | 1 | |
| 98S32005006001 | TOOL TO COMPRESS NLG SHOCK ABSORBER | 1 | |
| 98S32405000000 | LOW PRESS BRK SYS PURGING TOOL | 10 | |
| 98S32405000000-REVB | BRAKE PRESS BRK SYS PURGING TOOL | 1 | |
| 98S32405004-000 | LOW PRESSURE BRAKE SYSTEM PURGING TOOL | 1 | |
| 98S32405004000 | LOW PRESSURE BRAKE SYSTEM PURGING TOOL | 1 | |
| 98S53205000000 | TOOL-PRESSURE | 11 | |
| 98S532405002000 | BRAKE PRESSURE GAUGE (COMPLETE TOOL) | 1 | |
| 98S57105017026 | TOOLING PR | 1 | |
| 98S57605002000 | BALANCING TOOLING FINS WITH TAB SPRINGS | 3 | |
| 98S61003001000 | TOOLS FOR STORAGE PROPELLER | 1 | |
| 98S61003005000 | PROPELLER BALANCER TOOL | 1 | |
| 98S61003006000 | Propeller Balancer Tool | 6 | |
| 98S61003006100 | SWITCHING BOX - FOR PROP. BALANCER TOOL | 4 | |
| 98S61005000000 | PROPELLER CONTROL UNIT SETTING TOOL | 9 | |
| 98S61005001000 | PROPELLER BALANCER TOOL (SC1) | 2 | |
| 98S71003000002 | FIXTURE ENGINE/PROP TOOL | 10 | |
| 98V27908001000 | BPS backup power supply suppression tool | 3 | |
| 98V28004004000 | RECOVERY TOOL - FUEL PRESSURE GAUGE | 1 | |
| 98V36003000000 | PCE bleed air precooler exchanger disassembly tool | 5 | |
| 98V36003000001 | R/I TOOL – PRECOOLER | 3 | |
| 98V57103000000 | TOOL, PROTECT CARPET - CENTER WING BOX | 2 | |
| 98V57103003000 | TOOL, PROTECT - CENTER WING BOX MANHOLE | 1 | |
| 99-8106-4000 | Bag. Dr. Spring Drum Tool | 2 | |
| 990.00.00.830 | TOOL CALIBRATION PRESSURE | 1 | |
| 9943HART-001 | UNFEATHERING PROPELLER TOOL | 1 | |
| 9970-957-523 | TOOL SET, CHECKING PRESSURE DECA | 1 | |
| 9C1132G05 | FIXTURE, INSTALL/REMOVE - LRU_B777-300ER TOOL INITIAL PROVISIONING_[9C1132G05] | 1 | |
| 9C1201G01 | Tool - Balance Weight Clip, GE90 Low Pressure Turbine | 2 | |
| 9C1204G01 | ADAPTER, JACKSTAND - IDG (FOR 9C1132G05)_B777-300ER TOOL INITIAL PROVISIONING_[9C1204G01] | 7 | |
| 9C1883 | TOOL SET/BENCH HYDRAULIC PRESS | 1 | |
| 9C1929G01 | BUG SEAL TOOLS (PRE SB) | 1 | |
| 9C6016G01 | STABILIZE FIXTURE - FORWARD ENGINE MOUNT_B777-300ER TOOL INITIAL PROVISIONING_[9C6016G01] | 3 | |
| 9C6025P02 | STAND, SHIPPING - ENG/PROPULSOR_B777-300ER TOOL INITIAL PROVISIONING_[9C6025P02] | 2 | |
| 9C6030P01 | FIXTURE, SEPARATION - FAN CASE_B777-300ER TOOL INITIAL PROVISIONING_[9C6030P01] | 3 | |
| A-302 | STATIC PRESSURE TIP TOOL | 2 | |
| A00415 | NITROGEN FILLER TOOL PRESSUREREGULATOR TILL 100B | 1 | |
| A0269127 | PRESSING IN TOOL | 1 | |
| A0269128 | PRESSING IN TOOL | 1 | |
| A04007 | AIR CONNECTOR WITH PRESSURE RELIEF VALVE (IT IS PART OF THE TOOL J-AXLE45AHPA.)_ | 1 | |
| A10001-14 | TOOL - PITOT STATIC PROE COVERS | 1 | |
| A10002-7 | TOOL - INSTL / RMV, SMART PROBE PROTECTIVE COVER | 16 | |
| A10002-9 | POLE REM/INST PROBE COVER TOOL | 17 | |
| A11069 | COMPRESSION TOOL | 1 | |
| A11091 | LOCKING SPRING INSTALLATION TOOL | 1 | |
| A11918-1 | HOSE ASSY HYDRAULIC SYSTEM PRESSURE PTFE TOOL | 1 | |
| A16357 | BRAKE PISTON COMPRESSOR TOOL | 5 | |
| A21010-203 | POSITIVE PRESSURE TEST RIG TOOL | 12 | |
| A21010-70 | POSITIVE PRESSURE TEST RIG TOOL | 7 | |
| A24001-1 | B767 SPREADER BAR 4 BATT HOIST TOOL | 7 | |
| A2500203A | PRESSING TOOL | 1 | |
| A2551016620000 | PRESSURE TEST TOOL | 1 | |
| A27-17-90-53 | 2MM RIGID PROBE TOOL | 1 | |
| A27021 | CONTROL COLUMN PROTRACTOR RIG TOOL | 1 | |
| A27092-106 | TOOL, ACTUATOR/DEACTUATOR SET - PROXIMIT | 21 | |
| A27092-110 | ACTUATOR/DEACTUATOR SET - PROXIMITY SENSORS (DISPATCH TOOL) | 6 | |
| A27092-132 | ACTUATOR/DEACTUATOR SET - PROXIMITY SENSORS (DISPATCH TOOL) | 11 | |
| A27092-146 | TOOL-SET - PROX SNSR( UOI TBD) | 7 | |
| A27092-70 | TOOL-ACT/DEACTUATOR SET, PROXY SENSORS | 7 | |
| A2709270 | TOOL-ACT/DEACTUATOR SET,PROXY SENSORS | 7 | |
| A27171120000W67 | SPRING RETENTION TOOL | 1 | |
| A28005-82 | TEST TOOL LEAK & PRESSURE, APU FUEL LINE (ACC: A28005-81) | 9 | |
| A292683 | CRANKSHAFT DEFLECTION GAUGE TOOL NO. A292683 SET OF TWO HYDRAULIC JACKS FOR PRELOADING THE CONNECTING ROD STUDS ON VEE ENGINES. MUST BE USED WITH A292539 HYDRAULIC PUMP KIT. (6-1/4 IN. TALL) | 1 | |
| A292704 | CONNECTING ROD HYDRAULIC JACKS (VEE ENGINES) TOOL NO. A292704 (SET OF 2) SET OF TWO HYDRAULIC JACKS FOR PRELOADING THE CONNECTING ROD STUDS ON INLINE ENGINES. MUST BE USED WITH A292539 HYDRAULIC PUMP KIT. (4 IN. TALL) | 1 | |
| A3-06-2826 | ELT PROGRAMMING TOOLING (MODEL MEZ1500) | 1 | |
| A300-34-00-00-0011 | INSPECTION TOOL-PITOT PROBES | 1 | |
| A320-1 | PRESSURE BLANK KIT TOOL | 1 | |
| A320-28-1105 | ACT PRESS BLANK KIT TOOL | 1 | |
| A320/1 VAPOUR T/SET | VAPOUR SEAL PRESSURE CHECK TOOL | 1 | |
| A32003-1 | SPRING COMPRESSOR TOOL | 12 | |
| A32003-2 | COMPRESS TOOL | 1 | |
| A32003-7 | COMPRESS TOOL | 1 | |
| A32071-1 | COMPRESSION TOOL - SPRING CARTRIDGE NOSE WHEEL STEERING | 2 | |
| A32071-28 | COMPRESSION TOOL - SPRING CARTRIDGE NOSE WHEEL STEERING | 1 | |
| A32071-29 | COMPRESSION TOOL - SPRING CARTRIDGE NOSE WHEEL STEERING | 1 | |
| A32097-2 | B767 NLG SLEEVE PROTECTOR TOOL | 7 | |
| A32097-3 | B767 NLG THREAD PROTECTOR TOOL | 6 | |
| A32097-9 | THREAD PROTECTOR TOOL | 1 | |
| A32098-1 | TOOL, MLG AXLE PROTECTOR | 25 | |
| A32098-2 | MLG THREAD PROTECTOR TOOL | 15 | |
| A32098-3 | B767 MLG THREAD PROTECTOR TOOL | 11 | |
| A32099-76 | 787 SPRING EXTENDER EQUIP TOOL | 7 | |
| A32102-25 | ACTUATOR SET - PROXIMITY SENSOR TOOL | 11 | |
| A330-92464-0001 | LOCKING TOOL, SPRING ACTUATORS | 1 | |
| A36001-44 | B767 ENG-PRE COOLER KIT TOOL | 10 | |
| A3XX-26-00-00-0212 | TOOL- PRESSURE TEST | 1 | |
| A47676 | PROTECTIVE TOOL | 3 | |
| A48432 | COMPRESSION TOOL | 1 | |
| A708405 | PROX SENSOR R/I TOOL | 1 | |
| A71049-1 | PROBE ADAPTOR TOOL | 13 | |
| A79300001 | JT8 OIL TEMP PROBE TOOL | 1 | |
| AA-400 | AA-400 SUPER HEATER COMPRESSED-AIR HEATING TOOL | 2 | |
| AA292579 | SPRING COMPRESSOR TOOL NO. AA292579 FOUR (4) REPLACEMENT HOSES FOR CYLINDER HEAD HYDRAULIC MOUNTING FIXTURE AA293268 | 1 | |
| AA617-6329-001 | GIMBAL CAP PRESS SUPPORT TOOL | 1 | |
| AB34001-D2Q | FLUSHING TOOL-PITOT PROBE | 1 | |
| AC21805 | COMPRESSION TOOL TO REMOVE THE SPRING | 1 | |
| AC21805000 | COMPRESSION TOOL | 1 | |
| AC21826000-1 | RIVETING TOOL (PRESSURE PLATE) | 5 | |
| AC21910100 | PROTECTIVE TOOL | 4 | |
| AC21999000 | PROTECTIVE TOOL FOR HEAT PACK | 1 | |
| ACS76046 | TOOL, RIGGING TENSATOR SPRING | 4 | |
| ACS76049 | TOOL, RIGGING TENSATOR SPRING | 4 | |
| AD-2002-19-52 | PORTABLE WATER PRESSURE CHK TOOL | 1 | |
| AD42600-2 | EEC150 FIELD REPROGRAMMER TOOL | 1 | |
| AE300T12-1 | HIGH PRESSURE PUMP REMOVAL TOOL | 1 | |
| AE76224K | SPRING TENSION TOOL | 1 | |
| AE9002GSE | PROOF LOAD TOOL | 1 | |
| AEM444 | HAR DAV SPRINGER FORK TOOL | 1 | |
| AETL34394 | Spring Pin Insertion Tool | 1 | |
| AETL36400 | SPRING COMPRESSION TOOL | 1 | |
| AETL5651 | TOOL-INSERTION,SPRING | 1 | |
| AFG0185430 | SPRING TENSIONING TOOL | 1 | |
| AFT6355B0001-01-01 | BEARING PRESSING TOOL | 1 | |
| AFT6355B0001-01-02 | BEARING PRESSING TOOL | 1 | |
| AGE-003841-401 | BRAKE PRESSURE HOSE TOOL | 1 | |
| AGE-00387-401 | Phenom 100 Tooling - Control Surface Deflection Protractor | 9 | |
| AGE-02755-401 | TOOL - INSTL / RMV, SMART PROBE PROTECTIVE COVER | 2 | |
| AGE-02777-401 | DEVICE,INSTL/RMV.GAS SPRING TOOL | 1 | |
| AGE-03841-401 | Brake Pressure/Bleed Hose Tool | 9 | |
| AGE11820 | ASSEMBLY FIXTURE COMPRESSION TOOL | 2 | |
| AGE17077-B | TRONAIR RAT Ground Test Tool, For GTT Pressure Monitoring Box, 5000 psi | 5 | |
| AGE17077B | TRONAIR RAT Ground Test Tool, For GTT Pressure Monitoring Box, 5000 psi | 5 | |
| AGE18380 | RAT PRESSURE MONITOR TOOL | 3 | |
| AGE70068 | JACKING TOOL - STATOR - APS2300 - Pratt & Whitney Aeropower / Pratt & Whitney Canada | 12 | |
| AGE70459 | INSTALLATION TOOL - APU500 - Pratt & Whitney Aeropower / Pratt & Whitney Canada | 2 | |
| AGE70459D | INSTALLATION TOOL - APU500 - Pratt & Whitney Aeropower | 5 | |
| AGE70486 | LIFTING TOOL - APS5000 - Pratt & Whitney Aeropower / Pratt & Whitney Canada | 3 | |
| AGE70535 | PISTON RING COMPRESSION TOOL | 1 | |
| AGE70584 | BORESCOPE GUIDE TOOL - APU500 - Pratt & Whitney Aeropower / Pratt & Whitney Canada | 5 | |
| AID- 01480 | CARBON PRESS TOOL | 1 | |
| AID-00348 | VALVE COMPRESSION TOOL | 1 | |
| AID-00450 | Alignment Tool - APS3200 - Pratt & Whitney Aeropower / Pratt & Whitney Canada | 2 | |
| AID-00562 | STARGEAR SHAFT PRESS TOOL | 1 | |
| AID-00606-02-IAS | APU GARLOCK SEAL INSTALLATION TOOL (PRE MOD SEAL) | 1 | |
| AID-00804 | Piston ring compression tool (squirrel cage) | 1 | |
| AID-00804 | PISTON RING COMPRESSION TOOL | 1 | |
| AID-00845 | Piston ring compression tool(turbine nozzle) | 1 | |
| AID-00915 | PRESS TOOL SLEEVE | 1 | |
| AID-01027 | Cardbon Press Tool | 1 | |
| AID-01097 | PISTON RING COMPRESSION TOOL | 1 | |
| AID-01357 | SEAL INSTALLATION TOOL - APU500 - Pratt & Whitney Aeropower / Pratt & Whitney Canada | 3 | |
| AID-01357-IAS | SEAL INSTALLATION TOOL - APU500 - PRATT & WHITNEY | 1 | |
| AID-01403 | Primary Relief Valve Sleeve Removal/Install Tool | 1 | |
| AID-01480 | CARBON PRESS TOOL | 1 | |
| AID01357 | SEAL INSTALLATION TOOL - APU500 - Pratt & Whitney Aeropower / Pratt & Whitney Canada | 3 | |
| AIT32000-003-2 | TOOL-COMPRESSION | 1 | |
| AIT320008-00-3-4 | TOOL COMPRESSION | 4 | |
| AIT320008-003 | TOOL-COMPRESSION | 1 | |
| AIT320008-003-01 | COMPRESSION TOOL | 1 | |
| AIT320008-003-02 | COMPRESSION TOOL | 1 | |
| AIT320008-003-04 | TOOL-COMPRESSION | 1 | |
| AIT320008-003-1 | TOOL, COMPRESSION | 1 | |
| AIT320008-003-2 | TOOL, COMPRESSION | 3 | |
| AIT320008-003-3 | TOOL-COMPRESSION | 1 | |
| AIT320008-003-4 | TOOL-COMPRESSION | 4 | |
| AIT320020-001 | BOGIE COMPRESSION TOOL | 2 | |
| AIT320020-002 | MLG BOGIE COMPRESSION TOOL A350 | 1 | |
| AJ65B91267 | TOOL - JIG, PT2 PROBE ASSEMBLY, JT9D ENGINE INLET | 1 | |
| AJD061101 | PROOF LOAD TEST TOOL KOREAN | 1 | |
| AL-16 | SQUARE TOOL BITS ,STYLE AL CI° LEAD ANGLE ,TURNING TOOL PREMIUM CARBIDE TIPPED FOR TURNING TO A SQUARE SHOULDER. TOOL NO. AL-16 (LEFT HAND) ,W X H(SHANK SIZE) X L (1X1X7), NOSE RAD. 1/32 ,GRADE 370E =C5 EDP NO. 70245, LIST NO, 4110 .MORSE CUTTING TOOL | 1 | |
| AM23076 | TOOL - COMPRESSION | 1 | |
| AM29343 | DRIVE BLOCK PRESSING-IN TOOL | 1 | |
| AM29364 | Drive block pressing (in tool) | 1 | |
| AM29725 | DRIVE BLOCK PRESSING IN TOOL | 1 | |
| AM29726 | DRIVE BLOCK PRESSING-IN TOOL | 1 | |
| AMI-TW-TOOL | PowerAll Systems PAS-TW-TOOL Pratt & Whitney PT-6 Turbine Wheel Wash Tool | 1 | |
| AN919-13 | REDUCER BHGE AN919-13 USED IN WP 3011 00 SPECIAL TOOL FOR SUPER CORE PRESERVATION-DEPRESERVATION | 1 | |
| ANT-ICE-PRESSURE | ANT-ICE PRESSURE TOOL | 1 | |
| AO125757 | PRINTED CIRCUIT BOARD TOOL | 1 | |
| APC-1-25W331101 | MAIN ENTRY DOOR AIR SPRING COMPRESSION TOOL | 1 | |
| APC-4AS-2710001-450 | NLG SHOCK ABSORBER COMPRESSION TOOL | 1 | |
| APN 6552-S54-1 | Arbor Press Tooling | 1 | |
| APU-PX-TEST-GAUGE | APU PRESSURE TEST GAUGE TOOL | 1 | |
| AR 4728-1 | TEST TOOL - PRESSURE SENSOR, COCKPIT DOOR | 7 | |
| AR4723-1 | TEST TOOL PRESSURE SENSOR | 1 | |
| AR4728-1 | O2 DEPRESSION TEST TOOL | 7 | |
| ARB-00816 | Bearing race installation tool (hydraulic press) | 1 | |
| AS-73-0096-01 | TOOL KIT, PRESERVATION | 1 | |
| ASC4101-6 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| AST-P2A2360 | TOOL, DRILL PRESS SWAGING | 1 | |
| AST4554 | PUMP SPROCKET RETAINING TOOL | 1 | |
| AST4844 | CAMSHAFT SPR HOLDING TOOL PINS | 1 | |
| AT-56005 | SPRING ASSEMBLY REMOVAL TOOL - NLG | 1 | |
| AT-56005-1 | SPRING REMOVAL/INSTALLATION TOOL | 1 | |
| AT-56005-3 | SPRING REMOVAL/INSTALLATION TOOL | 1 | |
| AT-607 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 2 | |
| AT31848 | TOOL-SPRING COMPRESSION, NLG DRAG BRACE | 3 | |
| AT31849 | TOOL-SPRING COMPRESSION, MLG STABILIZER BRACE | 7 | |
| AT31849-IAS | TOOL SPRING COMPRESSION | 1 | |
| AT401MCA | MICRO SURFACE PREP TOOL W PAD | 1 | |
| AT56005-1 | SPRING REMOVAL/INSTALLATION TOOL | 1 | |
| AT56005-3 | SPRING REMOVAL/INSTALLATION TOOL | 1 | |
| AT56784-101 | RIGGING TOOL-PROXIMITY SENSORS,BLG | 1 | |
| AT56784-102 | RIGGING TOOL-PROXIMITY SENSORS,BLG | 1 | |
| AT56784-103 | RIGGING TOOL-PROXIMITY SENSORS,BLG | 1 | |
| AT66-22805 | Pressing Tool | 1 | |
| ATB1067 | INSERTION TOOL 20 GAGE FEMALE ROUND CANNON PLUG (WITHOUT SPRING LOCKS). | 3 | |
| ATE2728-001 | TOOL-INSTALLATION, SPRING SEAL | 1 | |
| AT−56005 | Spring Removal/Installation Tool NLG | 1 | |
| Alberth FSLF | SPRING LOADED SLIDER FAIRING REMOVAL TOOL | 1 | |
| B0027-00-3109-00 | LATCH MECH DEPRESSION TOOL | 1 | |
| B1356E | BRAKE RETAINER SPRING TOOL | 1 | |
| B1359B | BRAKE RETAINER SPRING TOOL | 1 | |
| B19416-1 | INSTALLATION PLUG PRE- FORMED PACKING TOOL | 1 | |
| B19750-1 | TOOL HIGH PRESSURE CAP | 1 | |
| B21001-2 | UNPRESS FLT RELIEF VALVE TOOL | 1 | |
| B221075T-1 | DECOMPRESSION LATCH TESTER TOOL | 15 | |
| B25004-1 | LIFE RAFT DOOR COMPRESSION SPRING - REMOVAL/INSTALLATION TOOL | 2 | |
| B27032-9 | POGO COMPRESSOR TOOL | 15 | |
| B27060-1 | SPRING REMOVAL TOOL LOAN FOR THREE DAYS | 9 | |
| B272-2 | - TOOL, PRE-BROACH | 1 | |
| B28001-18 | ADAPTER -R/I SUMP DRAIN VALVE TOOL_B777-300ER INITIAL PROVISIONING_[B28001-18] | 17 | |
| B28005-5 | PRESSURE TEST TOOL | 1 | |
| B32002-1 | M/NLG DOWNLOCK SPRING EXPANDER TOOL | 12 | |
| B32006-13 | TOOL,THREAD PROTECTOR SET | 13 | |
| B32010-14 | TOOL - MLG & BRAKE PROTECTOR | 23 | |
| B32010-15 | AXLE PROTECTOR TOOL | 18 | |
| B32010-3 | MLG THREAD PROTECTOR TOOL | 14 | |
| B32010-30 | MLG THREAD PROTECTOR TOOL | 2 | |
| B32011-14 | MLG THREAD PROTECTOR SET TOOL | 12 | |
| B32021-1 | NLG AXLE PROTECTOR TOOL | 19 | |
| B32021-2 | B757 NLG AXLE SLEVE PROTECTOR TOOL | 11 | |
| B32038-1 | UPLOCK SPRING EXTENDER TOOL | 3 | |
| B32051-1 | SPRING EXTENDER MLG+NLG TOOL | 5 | |
| B32061-2 | Springtool | 1 | |
| B43345-1 | TEST TOOL-PRESSURE,REGULATOR | 1 | |
| B49004-7 | APU THREAD PROTECTOR TOOL | 8 | |
| B52017-1 | COMPRESSION TOOL | 4 | |
| B598992N | TOOLS FOR PROPELLER AND ENGINE | 1 | |
| B623M4003101D343-01 | PRESSING-IN TOOL | 1 | |
| B65723156Z | TOOL PRESS IN | 1 | |
| B65723157Z | TOOL PRESS IN | 1 | |
| B787-110 | INLET COVER (GENERAL ELECTRIC), Boeing Tool No: PREFAD48BENC54Z001, 8 ball lock attachment details | 1 | |
| B787-115 | INLET COVER (ROLLS ROYCE), Boeing Tool No: PREFAD48BENC54Z002, 8 ball lock attachment details | 1 | |
| BA2604 | TYRE PRESSURE GAUGE NEWBOW TOOL | 5 | |
| BACC14AG | TOOLS CAP PROTECTIVE ALUMINUM FLA | 1 | |
| BAT-109 | Pneumatic Spring Cleco Tool | 1 | |
| BAT-BD10 | "Big Daddy" Plastic Scraper / Pry Tool | 1 | |
| BEVELPROTRACTOR | BEVEL PROTRACTOR TOOL | 1 | |
| BHL-198 | HIGH PRESSURE SERVICE TOOL - N2 | 1 | |
| BL51493 | SPRING TOOL FOR SPRING | 1 | |
| BLPKICKOFF07 | B-P CART/HAND TOOL PROMO 2007 | 1 | |
| BM327 | CRIMPING TOOL - SAFETY CABLE(DIA.032"LENGTH7") (OUT OF PRODUCTION REPL BY NEW BMXXX SERIES) TOOLS) | 5 | |
| BNG3220423B | PRIMAL KNIFE SHARPENING TOOL | 1 | |
| BP.P26 | 26" PROFESSIONAL TOOL BOX | 1 | |
| BP.P26A | 26" PROFESSIONAL TOOL BOX | 1 | |
| BST12 | HD NPR BRAKE SPRING TOOL | 1 | |
| BST12G | HDNPR BRAKE SPRING TOOL GM | 1 | |
| BST12O | HDNPR BRAKE SPRING TOOL ORG | 1 | |
| BT10 | T HANDLE SPRING BRAKE TOOL | 1 | |
| BT1360 | BRAKE RETAINER SPRING TOOL | 1 | |
| BT15 | BRAKE RETAINER SPRING TOOL | 1 | |
| BT17A | BRAKE RETAINER SPRING TOOL | 1 | |
| BT19A | BRAKE SPRING TOOL | 1 | |
| BT20 | TOYOTA BRAKE SPRING TOOL | 1 | |
| BT27 | GM BRAKE SPRING TOOL | 1 | |
| C-4696-2 | PRESSINGI TOOL | 1 | |
| C080-027-090-50 | 11" 90 DEG RIGID PROBE TOOL | 1 | |
| C080Z5-028-090-55 | RIGID PROBE TOOL | 1 | |
| C100-027-090-10 | 11"90 DEG RIGID PROBE TOOL | 1 | |
| C10390-1 | ROLLER BEARING SWAGGING TOOL DRILL PRESS | 1 | |
| C12004-6 | TOOL - SPRING BALLSCREW | 17 | |
| C2-21883 | MLG SPRING EXPANDER TOOL | 6 | |
| C26011-1 | ALIGNMENT TOOL - FIRE SUPPRESSION BOTTLE NOZZLE | 9 | |
| C26ZZZ | ALIGNMENT TOOL - FIRE SUPPRESSION BOTTLE NOZZLE | 1 | |
| C27078-1 | MEASUREMENT TOOL - PROTRACTOR | 13 | |
| C29008-1 | Seal Compressor Tool | 8 | |
| C32018-1 | PROTECTION GUIDE MLG AND NLG LOWER SEALS TOOL | 10 | |
| C32022-2 | B737 NG NLG PROTECTOR TOOL | 17 | |
| C32022-20 | TOOL-NLG AXLE THREAD PROTECTOR | 33 | |
| C32022-21 | PROTECTOR TOOL NLG | 14 | |
| C32022-39 | THREAD PROTECTOR TOOL MLG B737 | 13 | |
| C32034-235 | TOOL, PROTECTOR ASSY | 8 | |
| C35001-1 | PRESSURE TOOL | 6 | |
| C36005-37 | TOOL - SLING PRECOOLER | 4 | |
| C37099-103 | TOOL ADOPTER, PRESS TEST VALVE | 4 | |
| C47001-72 | TOOL NEADS NEGATIVE PRESSURE LEAK CHECK | 8 | |
| C47356 | PRESSING-IN TOOL | 1 | |
| C475782 | NLG THREAD PROTECTOR TOOL | 4 | |
| C47787 | PRESSING IN TOOL | 1 | |
| C47889 | COMPRESSION TOOL | 1 | |
| C47891 | COMPRESSION TOOL | 1 | |
| C49006-1 | APU R/I TOOL (THREAD PROTECTOR) | 34 | |
| C652-5929330-1 | AFT ATTENDENT DOOR SPRING WIND TOOL | 1 | |
| C652-5930314-401 | MLG SPRING STRECHING TOOL LH | 3 | |
| C652-5930314-402 | MLG SPRING STRECHING TOOL RH | 2 | |
| C78009 | REMOVE/INSTALL TOOL-PRIMARY EXHAUST ASSYS | 1 | |
| C78009-1 | Remove/Install Tool - Primary Exhaust Assemblies (CE) | 2 | |
| C78009-19 | Remove/Install Tool - Primary Exhaust Assemblies (CE) | 5 | |
| C78009-33 | TOOL NOZZLE PRIMARY | 5 | |
| C78009-38 | Remove/Install Tool - Primary Exhaust Assemblies (CE) | 6 | |
| C78009-39 | Remove/Install Tool - Primary Exhaust Assemblies (CE) | 9 | |
| C78009-72 | REMOVE/INSTALL TOOL - PRIMARY EXHAUST ASSEMBLIES (CE) | 6 | |
| C78009-77 | REMOVE/INSTALL TOOL - PRIMARY EXHAUST ASSEMBLIES | 1 | |
| C78009-88 | REMOVE/INSTALL TOOL - PRIMARY EXHAUST ASSEMBLIES | 9 | |
| C9393G01 | ADAPTER SET PRESSURE TEST/RIG - VIGV, VBV, VSV SPECIAL TOOL FOR PRESSURE TEST | 1 | |
| CA31100-0001 | PROPELLER SPECIAL TOOL | 1 | |
| CAT5612-3 | EXTRACTOR TOOL - CLG DRAG BRAKE SPRING P | 1 | |
| CAT5612-3E | SPRING PULLER ASSEMBLY TOOL | 1 | |
| CAT5833-1D | TOOL SPRING REMOVAL | 1 | |
| CG2042000-001 | ELEVATOR PRIMARY ACTUATION LOCK OUT TOOLS | 1 | |
| CG9000064-0047 | TOOL FUEL LINES PRESSURE OBSTRUCTION | 1 | |
| CG9000087-0001 | TOOL WAIV TAPRV ENERGIZER KIT | 1 | |
| CG9281001-0019 | TOOL KIT WING PRESSURIZATION | 1 | |
| CG9520004-0001 | SPRING LOCKING TOOLS | 1 | |
| CH1057-078-1 | PRESS TOOLS | 1 | |
| CH1057-136 | PRESS TOOL | 1 | |
| CH140366 | VALVE DEPRESION TOOL | 1 | |
| CH1540-0277 | COMPRESSION TOOL | 3 | |
| CH1878-0579 | PRESS TOOL AND BUSH | 1 | |
| CH1878-0608 | SPRING LOADING TOOL | 1 | |
| CH1878-0608PM | SPRING LOADING TOOL | 1 | |
| CH2718GE1000 | COMPRESSIVE NO- BACK TOOL | 1 | |
| CHA1057-136 | PRESS TOOL | 1 | |
| CHA141026 | SPRING CLIP (POINTER) TOOL | 3 | |
| CHA1542-0022 | Spring Compression Tool | 1 | |
| CHA1716-0120 | SPRING SETTING TOOL | 1 | |
| CHA1716-0292 | SPRING ASSEMBLY TOOL | 1 | |
| CHA1878-0584 | Spring Compression Tool | 1 | |
| CHA1878-0584PM | SPRING COMPRESSION TOOL | 1 | |
| CHA1878-0608 | Spring Loading Tool | 1 | |
| CHA1898-0078 | ASSEMBLY, PROOFING AND EXTRACTION TOOL | 1 | |
| CHA1898-0115 | ASSEMBLY, PROOFING AND EXTRACTION TOOL | 1 | |
| CHA1917-0078 | SPRING COMPRESSION TOOL (GOODRICH ACTUATION SYSTEMS ) | 1 | |
| CJMD234-108 | TOOL PRIM FLIGHT DISPL REMOV | 2 | |
| CJMDX21-001 | TOOL TUBE KIT PRESSURE | 5 | |
| CJMDX32-003 | TOOL PROTRACTOR NOSE WHEEL STR | 1 | |
| CNT51-1851 | 6IN SPRING HOOK TOOL | 1 | |
| CODE 690411 | BLEED AIR SYSTEM PRESSURE AND LEAK CHECK TEST FIXTURE TOOL | 1 | |
| CODE690411 | BLEED AIR SYSTEM PRESSURE AND LEAK CHECK TEST FIXTURE TOOL | 1 | |
| COM-14469 | PRESSURE MONITOR TOOL | 1 | |
| COM-2481 | TOOLS - SEALANT REMOVAL, BAC5000, PSD 6-184 APPROVED | 1 | |
| CP-0351 | ALLIGATOR JAW COMPRESSION RIVETER TOOL | 2 | |
| CP16101 | CAPRI TOOLS 1/4 IN. DRIVE 12-POINT SHALLOW AND DEEP SOCKET SET, SAE, 3/16 TO 9/16 IN, SAE, 20-PIECE | 1 | |
| CP58151 | IMPACT EXTENSION SET 3", 6", 12" 1/2 INCH DRIVE (3 PC CAPRI TOOLS) | 1 | |
| CPWA30415 | COMPRESSER TOOL | 1 | |
| CRACK-PX-GAUGES | CRACK PRESSURE GAUGES TOOL | 1 | |
| CREW-02-REG-PX-CHK | CREW OXY REG PRESS CHK TOOL | 1 | |
| CRK9913 | PRY CUTTER KEYCHAIN TOOL | 1 | |
| CS-235-RC106 | LH ELEVATOR TAB PROTRACTOR - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| CS-295-AG131-X | COMPRESSOR KIT, ICE PROTECTION AND AIR CONDITIONING SYSTEM - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| CS-295-RC114 | COMPRESSOR KIT, ICE PROTECTION AND AIR CONDITIONING SYSTEM - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| CS-710-119 | INSTALLATION / REMOVAL TOOL PRESS. RELIEF VALVE | 2 | |
| CS-710-558 | PIN PROGRAMMING DEVICE TOOL | 1 | |
| CS-710-565 | PRIMARY LATCH TEST TOOL | 1 | |
| CS-710-642 | PRIMARY LATCH TEST TOOL (DRIVE SIZE: 1/4IN.) | 1 | |
| CS710-119 | TOOL, PRESS. RELIEF VALVE | 2 | |
| CST-2834 | BETA SYSTEM DECOMPRESSION TOOL (HARTZELL PROPELLER INC.) | 1 | |
| CST-2987 | BETA SYSTEM DESCOMPRESSION TOOL | 3 | |
| CST-2987 OR CST-2834 | BETA SYSTEM DECOMPRESSION TOOL (HARTZELL PROPELLER INC.) | 1 | |
| CST-2987CST-2834 | BETA SYSTEM DECOMPRESSION TOOL (HARTZELL PROPELLER INC.) | 1 | |
| CST2987 | BETA SYSTEM DECOMPRESSION TOOL - HARTZELL | 3 | |
| CT1-697742100 | COMPRESSION TOOL | 1 | |
| CTPP861BKDB | 14.4V POLISH/PREP TOOL DB BLK | 1 | |
| CTPP861BKK2 | 14.4v POL/PREP TOOL KIT BLK | 1 | |
| CTPP861BKW1 | 14.4v POLSH/PRP TOOL w/BAT BLK | 1 | |
| CTPP861BKW2 | 14.4v POLSH/PRP TOOL 2-BAT BLK | 1 | |
| CTPP861DB | 14.4v POLISH/PREP TOOL ONLY DB | 1 | |
| CTPP861GDB | 14.4v POL/PREP TOOL DB GRN | 1 | |
| CTPP861GJ2 | 14.4v POL/PREP TOOL KT JPN GRN | 1 | |
| CTPP861GK2 | 14.4v POL/PREP TOOL KIT GRN | 1 | |
| CTPP861GMJ2 | 14.4v POL/PREP TOOL KIT JPN GM | 1 | |
| CTPP861GMK2 | 14.4v POL/PREP TOOL KIT GN MTL | 1 | |
| CTPP861GMU2 | 14.4v POL/PREP TOOL KIT EU GM | 1 | |
| CTPP861GMW1 | 14.4v POLSH/PREP TOOL w/BAT GM | 1 | |
| CTPP861GMW2 | 14.4v POLSH/PRP TOOL 2-BAT GM | 1 | |
| CTPP861GU2 | 14.4v POL/PREP TOOL KIT EU GRN | 1 | |
| CTPP861GW1 | 14.4v POLSH/PRP TOOL w/BAT GRN | 1 | |
| CTPP861GW2 | 14.4v POLSH/PRP TOOL 2-BAT GRN | 1 | |
| CTPP861HVDB | 14.4v POL/PREP TOOL DB HI-VIZ | 1 | |
| CTPP861HVDF | 14.4v PLSH/PREP TOOL BULK HV | 1 | |
| CTPP861HVJ2 | 14.4v POL/PREP TOOL KIT JPN HV | 1 | |
| CTPP861HVK2 | 14.4v POL/PREP TOOL KIT HI-VIZ | 1 | |
| CTPP861HVU2 | 14.4v POL/PREP TOOL KIT EU HV | 1 | |
| CTPP861HVW1 | 14.4v POL/PREP TOOL w/BAT HV | 1 | |
| CTPP861HVW2 | 14.4v POLSH/PRP TOOL 2-BAT HV | 1 | |
| CTPP861J2 | 14.4v POL/PREP TOOL KIT JPN | 1 | |
| CTPP861K2 | 14.4v POL/PREP TOOL KIT RED | 1 | |
| CTPP861ODB | 14.4v POL/PREP TOOL DB ORG | 1 | |
| CTPP861OJ2 | 14.4v POL/PREP TOOL KT JPN ORG | 1 | |
| CTPP861OK2 | 14.4v POL/PREP TOOL KIT ORG | 1 | |
| CTPP861OU2 | 14.4v POL/PREP TOOL KIT EU ORG | 1 | |
| CTPP861OW1 | 14.4v POL/PREP TOOL w/BAT ORG | 1 | |
| CTPP861OZ2 | 14.4v POL/PRP TOOL AUS ORG | 1 | |
| CTPP861U2 | 14.4v POL/PREP TOOL KIT EU/UK | 1 | |
| CTPP861W1 | 14.4v POLSH/PREP TOOL wBAT RED | 1 | |
| CTPP861Z2 | 14.4v POL/PREP TOOL KIT AUST | 1 | |
| CTS319E76A | 146 PROX SWITCH TOOL | 6 | |
| CV1981-42V-960W | SHRINKING,TOOL-NO MORE PROCURABLESHRINKING TOOL | 1 | |
| CV1981-42V960W | SHRINKING,TOOL-NO MORE PROCURABLE | 1 | |
| D-07038 | PRESSURE GAUGE FOR INFLATION TOOL | 1 | |
| D-5945 | FEEDBACK COLLAR RETRACTOR TOOL ON THE PROPELLER. (THREE AND FOUR BLADE PROPELER) | 4 | |
| D1 | AOA PROTRACTOR TOOL | 1 | |
| D16664AA | AOA PROTACTOR TOOL | 2 | |
| D24298TL2 | COMPRESSION/DEPRESSION TOOL | 1 | |
| D24300TL2 | COMPRESSION/DEPRESSION TOOL | 1 | |
| D44-7521-00-00-ST | PRESSURE TOOL ASSEMBLY | 1 | |
| D46108 | COMPRESSION TOOL | 1 | |
| D46110 | COMPRESSION TOOL FOR SPRING | 4 | |
| D46301 | EXTRACTOR AND PRESSING IN TOOL | 3 | |
| D46475 | Compression Tool | 1 | |
| D5945 | PROPELLER REMOVAL TOOL | 4 | |
| D622M0340101D523-01 | PRESS IN CUFF BUSHINGS TOOL (SAP CODE 8334910) | 1 | |
| D622M0340101D531-01 | PRESS OUT CUFF BUSHINGS TOOL (SAP CODE 8334911) | 1 | |
| D792 | TOOLDUAL TRANSDUCER PROBE | 1 | |
| D97800-003 | DRAIN TOOL, 1/2 PROBE CO | 1 | |
| DAD5013 | TOOL - SEALANT REMOVAL, BAC5000, PSD 6-184 APPROVED | 1 | |
| DAH601789 | TOOL,PRESSURE PAD STAKING | 1 | |
| DAH602234 | TOOL-PRESS | 1 | |
| DAI-7500-01-00-ST | PRESSURE RELIEF VALVE BLOCKING TOOL | 1 | |
| DAI-7521-00 | PRESSURE TOOL | 1 | |
| DAK123-22AL | Installing Tool - Long Probe | 2 | |
| DAK270 | Installing Tool with 3 Probes | 2 | |
| DAPT60-0090-00 | SEAL COMPRESSION TOOL | 1 | |
| DAPT60-0108-00 | PROP TOOL Q400 | 1 | |
| DAPT60-0126 | PROP PITCH TOOL | 1 | |
| DAPT60-0126-00 | TOOL-PROP PITCH CHANGE (BLADE BAT) | 8 | |
| DAPT60-0126-00-IAS | TOOL PROP PITCH CHANGE (BLADE BAT) | 1 | |
| DAPT60-0126-00IAS | TOOL-PROP PITCH CHANGE (BLADE BAT) | 1 | |
| DAPT60-0223-00 | OUTER SLEEVE CLAMP ( PROPELLER BLADE TOOL) | 7 | |
| DAPT60-0386-00 | COMPRESSION RING TOOL | 5 | |
| DAPT60-0400-00 | PROP TOOL | 7 | |
| DAPT60-0422-00 | COMPRESSION TOOL FOR PROP HUB PISTON | 2 | |
| DAPT60-0442-00 | COMPRESSION TOOL | 1 | |
| DAPT63-0027-00 | PRESSURE VALVE TOOL | 1 | |
| DAPT65-0087-00 | TOOL SPINNER REMOVAL PROP Q400 | 6 | |
| DAPT65-0087-00-IAS | PROP SPINNER REMOVAL TOOL SET.. | 1 | |
| DAPT70-0021 | PROP LIFTING TOOL | 1 | |
| DBS-CG7 | Tension Verification Compression Fixture for DBS-2100 Hand Operated .250 Wide One-Step Band Application Tool | 3 | |
| DBS-CG8 | Tension Verification Compression Fixture for DBS-2200 Hand Operated .125 Wide One-Step Band Application Tool | 3 | |
| DCM1589-1 | TOOL,DOWNLOCK SPRING INSTL/RMVL-NLG/MLG | 1 | |
| DCM1589-1 | TOOL,DOWNLOCK SPRING INSTL/RMVL-NLG/MLG | 1 | |
| DCM1590-1 | TOOL,SHOCK STRUT COMPRESSION-NLG | 1 | |
| DCM1590-1 | TOOL,SHOCK STRUT COMPRESSION-NLG | 1 | |
| DEC COMPRESSION TOOL Q464998 | DEC COMPRESSION TOOL Q464998 | 1 | |
| DFD5019 | Tool - Sealant Removal, BAC5000, PSD 6-184 Approved | 1 | |
| DFS33790-11 | TOTAL PRESS. PROBE DRAIN HOLE TOOL | 1 | |
| DFS33790-22 | PITOT PROBE DRAIN HOLES CLEANING TOOL | 3 | |
| DHK159 | Installing/Removal Tool with 7 Probes | 2 | |
| DHK160 | Installing/Removal Tool with 5 Probes | 3 | |
| DLTFRPSKT3004 | TOOL - PRMASWAGE - | 11 | |
| DLXRV-2X | Deluxe RV Aircraft Tool Kit - 658 Pieces! Comprehensive Kit with 2X Rivet Gun - Now Includes TUNGSTEN BUCKING BAR! | 1 | |
| DLXRV-3X | Deluxe RV Aircraft Tool Kit - 658 Pieces! Comprehensive Kit with 3X Rivet Gun - Now Includes TUNGSTEN Bucking Bar! | 1 | |
| DMAK-C295CN235 | RH ELEVATOR TAB PROTRACTOR - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| DMC1000 | .032" Pre-Set Tension Safe-T-Cable® Application Tool Kit | 2 | |
| DMC1000-11 | .040" Pre-Set Tension Safe-T-Cable® Application Tool Kit | 2 | |
| DMC1000-19 | .032" & .040" Pre-Set Tension Safe-T-Cable® Application Tool Kit | 2 | |
| DMC1000-20 | .022"& .032" Pre-set Tension Safe-T-Cable® Application Tool Kit | 2 | |
| DMC1000-4 | .032" Pre-Set Tension Safe-T-Cable® Application Tool Kit with Test Block | 2 | |
| DMC1000-6 | .032" Pre-Set Tension Safe-T-Cable® Application Start Up Tool Kit | 2 | |
| DMC1001 | .022" Pre-Set Tension Safe-T-Cable® Application Tool Kit | 2 | |
| DMC1001-7 | .022" Pre-Set Tension Safe-T-Cable® Application Tool Kit with Test Block | 2 | |
| DMC1001-8 | .022" Pre-Set Tension Safe-T-Cable® Application Tool Kit with Test Block (No Cable Included) | 2 | |
| DMC1264 | KIT, CRIMP TOOL - ELECTRICAL CONNECTOR REF FOUND IN STANDARD WIRE PRACTICES MANUAL (SWPM). (DANIELS MANUFACTURING CORPORATION) | 7 | |
| DMC1319 | BOMBARDIER GLOBAL EXPRESS TOOL KIT | 4 | |
| DN2XD6-02 | DEMO TOOLS/PROPS/MISC | 1 | |
| DP-001 | ABSOLUTE PRESSURE SENSOR TOOL | 1 | |
| DRK105 | Plastic-Probe Unwired Contact Removal Tool with 5 Probes | 7 | |
| DRK110 | REMOVAL TOOL PROBES (IN 0005948) | 6 | |
| DRK110M | Removal Tool - 3 Probes | 2 | |
| DRK130 | REMOVAL TOOL - 4 PROBES | 2 | |
| DRK137 | Removal Tool with Probes | 5 | |
| DRK159 | Removal Tool #8 with 2 Probes | 2 | |
| DRK174 | Removal Tool with 6 Probes | 2 | |
| DRK181 | Removal Tool #20 with 3 Probes | 3 | |
| DRK276-12 | Metal-Probe Unwired or Broken Contact Removal Tool, Size 12 | 2 | |
| DRK276-16 | Metal-Probe Unwired or Broken Contact Removal Tool, Size 16 | 2 | |
| DRK276-20 | Metal-Probe Unwired or Broken Contact Removal Tool, Size 20 | 2 | |
| DRK276-22 | Metal-Probe Unwired or Broken Contact Removal Tool, Size 22 | 2 | |
| DRK276-22D | Metal-Probe Unwired or Broken Contact Removal Tool, Size 22D | 2 | |
| DRK300 | Removal Tool with 8 Probes | 2 | |
| DRK39 | Removal Tool with 2 Probes | 2 | |
| DRK57 | Removal Tool with 3 Probes | 2 | |
| DRK59 | Removal Tool with 5 Probes | 2 | |
| DRK80 | Removal Tool #12 with 3 Probes | 3 | |
| DRK81 | Removal Tool with 4 Probes | 3 | |
| DRK81-20 | Removal Tool with 2 Probes | 2 | |
| DRK82 | Installing/Removal Tool #16 with 3 Probes | 3 | |
| DRK94-8 | Removal Tool #8 - 2 ProbeS | 2 | |
| DRK96 | Removal Tool with 4 Probes | 2 | |
| DRT 173207 | DRT 173207 PRESS TOOL | 1 | |
| DRT 9360/5 | PRESS TOOL | 1 | |
| DRT173207 | Press Tool | 1 | |
| DRT173207PM | DRT 173207 PRESS TOOL | 1 | |
| DRT174-204-ITEM-1 | press tool | 1 | |
| DRT174200 | press tool | 1 | |
| DRT59360/3 | PRESS TOOL | 1 | |
| DRT59360/4 | PRESS TOOL | 1 | |
| DRT59360/7 | PRESS TOOL | 1 | |
| DRT68003 | SIDESTAY COMPRESSION SPRING REMOVAL TOOL | 13 | |
| DRT68006 | SIDESTAY TENSION SPRING REMOVAL TOOL | 11 | |
| DRXWSHHDPVT | PIVOT PRO KNIFE/TOOL SHARPENER | 1 | |
| DRYBAY | DRY BAY PRESS/VACUUM TEST SET TOOL | 1 | |
| DZZ7254-1 | CLG Pressure Test Tool | 1 | |
| E20000Z3-1 | PROXIMITY SENSOR - SPECIAL TOOL | 4 | |
| E20998 | PROXIMITY SENSOR-SPECIAL TOOL | 2 | |
| E2J46648 | PRESSING TOOL | 1 | |
| E2J52189FAS | PRATT & WHITNEY ENGINE TURNING TOOL | 1 | |
| E2J57129 | IP COMPRESSOR TURNING TOOL | 6 | |
| E2J60592 | CRIMP SPRAY NOZZEL E4 TOOL | 3 | |
| E5106 | SPRING FITTING TOOL (FIGURE 9011) | 1 | |
| E51774-1 | PROBE INSTALLATION TOOL | 1 | |
| E60231 | SPRING INSTALLATION TOOL | 1 | |
| E61012-001 | PRESSURE FILTER REMOVAL TOOL | 1 | |
| E74413 | SPRING PIN INSTALLATION TOOL | 1 | |
| EAA0372G24A | MOUNTING TOOLS PROTECTOR | 1 | |
| EDDIE-4 | TOOL - BONDE PRODUCTS | 1 | |
| ELT96A 9800 000 003 | PROGRAMMING TOOL | 2 | |
| ELT96A9800000001 | TOOL-PROGR.ELT,ENGLISH VERS | 1 | |
| ELT96A9800000003 | PROGRAMMING TOOL BOX, ELT96A - EN/FR | 2 | |
| ELT96A9800000004 | PROGRAMMING TOOL | 7 | |
| ELT96A980000001 | Tool-Progr.Elt,English Vers | 1 | |
| ELT96A980000003 | ELT PROGRAMMER TOOL | 1 | |
| ELTA96A9800000004 | ELT PROGRAMMING TOOL | 1 | |
| EMB00471-007 | COMPRESSION TOOL - GAS SPRING | 1 | |
| EP-63740-H | PROPELLER LOWERING TOOL | 1 | |
| EP510C | HYD COMPRESSION TOOL | 1 | |
| EP63740-H | PROPELLER LOWERING TOOL | 1 | |
| EPR TEST LEADS&TUBE | EPR TEST SET LEADS & TUBING TOOL | 1 | |
| ERE2095 | TOOL - EXTRACTION, EXTEND-PROXIMITY SWITCH SENSOR | 1 | |
| ERE2097 | TOOL - INSERTION, EXTEND-PROXIMITY SWITCH SENSOR | 1 | |
| ERE5067 | TOOL - CRIMPING, EXTEND-PROXIMITY SWITCH SENSOR | 1 | |
| ET-1250 | LANDING GEAR SPRING TOOL | 1 | |
| ET-1251 | LANDING GEAR SPRING TOOL | 1 | |
| EV07 | MANUAL PROCESSING TOOL (TIE WRAP) | 2 | |
| EXT025 | PROPELLER HUB PRESS. TOOL ATR 72 | 1 | |
| F0509715 | SEAT PAN SPRING INSTALL TOOL RH | 2 | |
| F0509716 | SEAT PAN SPRING INSTALL TOOL LH | 3 | |
| F1273882 | Pitot Probe Tube Straightning Tool | 3 | |
| F21878100-2 | SHOCK ABSORBER PRESSURE CHARGING TOOL | 1 | |
| F2669300 | COMPRESSION TOOL | 1 | |
| F26693000 | INSTAL REMOV RETAINING COMPRESSION TOOL | 7 | |
| F26811000 | COMPRESSION TOOL | 1 | |
| F27108000 | TOOL INSTALL/REMOVE SPRING | 2 | |
| F2727300 | TOOL USED TO TEST THE PRESSURE RELIEF VALVE | 1 | |
| F27273000 | TOOL USED TO TEST THE FUSE PLUG ASSEMBLIES (1-380) OR (1-380A) AND THE PRESSURE RELIEF VALVE (1-060) | 2 | |
| F27472000 | PRELOADED NUT CRIMPING TOOL | 1 | |
| F27474000 | TOOL-COMPRESSION | 1 | |
| F27483000 | TOOL-COMPRESSION, PRESS | 1 | |
| F27507000 | COMPRESSIONTOOL | 1 | |
| F27516000 | TOOL-COMPRESSION/DECOMPRESSION | 1 | |
| F2MA93205 | BRAKING PRESSURE CHECKING TOOL | 1 | |
| F2MA932305 | BRAKING PRESSURE CHECKING TOOL | 1 | |
| F2MA932602 | TOOL, PROX SWITCH | 1 | |
| F2MA952500 | COMPRESSION TOOL FOR SPRING OF BAGGAGE COMPARTMENT DOOR | 1 | |
| F45109-22 | ENGINE UNIV. PROTR. ADAPTOR TOOL | 1 | |
| F46753-1000 | PROTECTIVE TOOL | 10 | |
| F46754-100 | MLG AXLE THREAD PROTECTOR TOOL | 5 | |
| F46754-1000 | MLG WHEEL THREAD PROTECTOR TOOL | 46 | |
| F467541000 | A300/A320 AXLE PROTECTOR TOOL | 46 | |
| F47116 | Tool Preventing | 1 | |
| F601R2131-TFIX3 | ALTITUDE LIMITIER PROTECTION TOOL | 2 | |
| F626S52 | SPRING TOOL, PARATROOP DOOR NEGATOR | 1 | |
| F627S52 | SPRING TOOL, PARA TROOP DOOR | 1 | |
| F70199-1 | TYRE INFLATION TOOL (LOO PRESS) | 22 | |
| F70199-25 | TIRE PRESSURE CHECK TOOL | 14 | |
| F70199-46 | GAS SPRING CHARGING TOOL | 3 | |
| F70199-52 | USED TO INFLATE AND CONTROL THE TIRE PRESSURE ON THE LANDING GEAR FOR ALL BOEING AIRCRAFTS. THIS TOOL CONSISTS OF AIR CHUCKS FOR BOTH LARGE AND SMALL BORE TIRE VALVE STEMS AND A DIGITAL GAUGE. | 21 | |
| F70200-14 | PRES GAUGE, INFLATOR TOOL | 19 | |
| F70200-35 | INFLATION TOOL LG (HI PRESS) | 16 | |
| F72790 | TOOL-PROTRACTOR MOUNT | 26 | |
| F72865 | PRESSURE STAKING TOOL USED FOR PRESSURE STAKING | 1 | |
| F72865-1 | PRESSURE STAKING TOOL - FORWARD LINK PIVOT BEARING, THRUST REVERSER | 1 | |
| F72909-1 | COMPRESS SPRING TOOL | 2 | |
| F72909-2 | TOOL COMPRESS SPRING | 1 | |
| F72913-10 | TOOL - AXLE THREAD PROTECTOR | 14 | |
| F72913-11 | AXLE THREAD PROTECTOR TOOL | 32 | |
| F72913-15 | AXLE AND THREAD PROTECTOR TOOL | 12 | |
| F72917-1 | GROUND FAULT PROTECTION SYSTEM TOOL | 4 | |
| F72928-58 | REGULATOR AIR PRESSURE TOOL | 11 | |
| F72938 | TOOL SET -0 PNEUMATIC DUCT PRESS SYSTEM FOR | 1 | |
| F72973-1 | ADJ. TOOL-OIL PRESS | 1 | |
| F72973-10 | ABSOLUTE PRESSURE GAUGE TOOL | 3 | |
| F73006-1 | SPRING EXPANDER TOOL | 3 | |
| F73006-1 R | STAIR SPRING REMOVAL TOOL | 1 | |
| F7XC202159106A1 | TOOL KIT FOR VACUUM PPRV TEST | 1 | |
| F7XC202159106A2 | TOOL KIT FOR VACUUM PPRV TEST | 1 | |
| F7XC202159106B1 | TOOL KIT FOR VACUUM PRV | 1 | |
| F80-0-2232 | SEAL COMPRESSING TOOL | 1 | |
| F80-0-4248 | Spring Compression Tool | 1 | |
| F80-0-5956 | O-RING COMPRESSION TOOL | 1 | |
| F80-6-3 | CAP SEAL ID COMPRESSOR TOOL | 1 | |
| F80113 | THREAD PROTECTOR ALIGN TOOL | 4 | |
| F80113-50 | DRILL PRESS ROLLER SWAGING TOOL | 10 | |
| F80115-1 | THREAD PROTECTOR AND ALIGNMENT TOOLS - MAIN GEAR | 8 | |
| F80115-10 | Thread Protector And Alignment Tool - MLG | 15 | |
| F80115-11 | THREAD PROTECTOR&ALIGMENT TOOL | 10 | |
| F80115-11 | THREAD PROTECTOR and ALIGNMENT TOOL - MLG | 10 | |
| F80115-12 | Thread Protector&Alignment Tool | 9 | |
| F80115-12 | THREAD PROTECTOR and ALIGNMENT TOOL - MLG | 9 | |
| F80115-13 | Thread Protector&Alignment Tool | 8 | |
| F80115-14 | THREAD PROTECTOR & ALIGNMENT TOOL, MLG | 7 | |
| F80115-15 | THREAD PROTECTOR AND ALIGNMENT TOOLS- MAIN GEAR | 5 | |
| F80115-16 | Thread Protector And Alightment Tool - Main Gear | 12 | |
| F80115-17 | THREAD PROTECTOR & ALIGNMENT TOOL, MLG | 7 | |
| F80115-2 | MLG ALIGNMENT TOOL THREAD PROTECTOR | 6 | |
| F80115-3 | MLG ASSEMBLY TOOL THREAD PROTECTOR | 4 | |
| F80115-4 | MLG ASSEMBLY TOOL THREAD PROTECTOR | 4 | |
| F80115-5 | MLG ALIGNMENT TOOL THREAD PROTECTOR | 2 | |
| F80115-6 | TREAD PROTECTOR AND ALIGNMENT TOOLS - MAIN | 1 | |
| F80115-7 | TREAD PROTECTOR AND ALIGNMENT TOOLS - MAIN | 1 | |
| F80115-8 | THREAD PROTECTOR AND ALIGNMENT TOOLS - MAIN GEAR | 3 | |
| F80115-9 | THREAD PROTECTOR AND ALIGNMENT TOOLS - MAIN GEAR | 4 | |
| F80115-XX | Thread Protector And Alignment Tools -Main Gear | 1 | |
| F80141-1 | MLG THREAD PROTECTOR & ALIGNMENT TOOL | 17 | |
| F80155-17 | THREAD PROT. & ALIGNMENT TOOL | 1 | |
| F80169-1 | DOWN-LOCK SPRING REM / INS TOOL | 15 | |
| FAT 31-35-41000 | SPRING, STRETCHING TOOL. MLG | 1 | |
| FAT02-35-42-000 | TOOL, SPRING STRETCHING | 1 | |
| FAT31-35-41-000 | SPRING, STRETCHING TOOL. MLG | 1 | |
| FAT31-35-41000 | SPRING, STRETCHING TOOL. MLG | 1 | |
| FBP-787-CCR | 787 LONG REACH FIB/OPT PROBE TOOL | 1 | |
| FBR-HL5MK | TOOL - BONDE PRODUCTS | 1 | |
| FE374201/201 | TANK PRESSURE TOOL | 1 | |
| FE374501200 | TANK PRESSURE TOOL | 1 | |
| FGFB932305-1 | TOOL BRAKING PRESS CHECK | 1 | |
| FIRE-PRESS-TEST-PIPE | FIRE PRESS TEST PIPE TOOL | 1 | |
| FLAP-DEPRESSURE-TOOL | FLAP DEPRESSURE TOOL | 1 | |
| FLSF | Spring Loaded Fairing Tool | 1 | |
| FMCLFT-R | C4 LIFT TOOL PER PRINT | 1 | |
| FMHA-2-0 | FORK LIFT SPREADER BAR TOOL | 1 | |
| FMST1-75753 | FATMAX PRO TOOLBOX | 1 | |
| FS0-0-50496 | Compression Tool {Optional to FS0-0-50945) | 1 | |
| FSLF | SPRING LOADED FAIRING TOOL | 1 | |
| FSOTDR-PRO-I-PC-SC-LC | FSOTDR-PRO-I-PC-SC-LC;3Z SmartOTDR 1310/1550 Installation Tool | 1 | |
| FSOTDR-PRO-IM-PC-SC-LC | FSOTDR-PRO-IM-PC-SC-LC;3Z SmartOTDR 1310/1550/F1650 Installation and Troubleshooting Tool | 1 | |
| FT0000175 | RH SEATPAN SPRING INSTALL TOOL | 1 | |
| FT0000177 | LH SEATPAN SPRING INSTALL TOOL | 1 | |
| FTC102 | 787 TAT PROTECTIVE COVER TOOL | 17 | |
| FTI-190LIN-53-0061-1 | SPECIAL TOOL REQUIRED TO PERFORM THE COLD WORK PRO | 1 | |
| FY5-06456W09-01 | TOOL-PRESSURE TEST, APU BLEED SYSTEM | 1 | |
| FY5-6262W09-01 | TOOL-TANK PRESUURISATION TEST | 1 | |
| G01J3P3 | KIT, CRIMP TOOL - ELECTRICAL CONNECTOR REF FOUND IN STANDARD WIRE PRACTICES MANUAL (SWPM) (GRAPHIC DATAKITS INTERNATIONAL (6495 CORP.)) | 1 | |
| G21003-1 | PROBE STATIC PRESSURE - BOEING 747 TOOL | 6 | |
| G2527299304000 | PRESSURE TEST TOOL BCRC | 1 | |
| G32075-16 | TOOL-PRESSURE TEST,ACT | 9 | |
| G36044-1 | TOOL R/I PRECOOLER | 1 | |
| G36044-132 | TOOL R/I PRECOOLER | 1 | |
| G36044-204 | TOOL R/I PRECOOLER | 1 | |
| G36044-217 | TOOL R/I PRECOOLER | 5 | |
| G36044-222 | TOOL R/I PRECOOLER | 1 | |
| G36044-272 | PRECOOLER REM/INS TOOL | 3 | |
| G600-320053-1 | TOOL BRAKE PISTON COMPRESSION | 1 | |
| G601R21109-1 | GAS SPRING COMPRESSION TOOL | 1 | |
| G601R274202-1 | PROTECTION TOOL | 8 | |
| G601R275301-101 | Flex Shaft Pressure Test Tool | 2 | |
| G601R275301−101 | Flex Shaft Pressure test Tool | 2 | |
| G601R276202-27 | PCU PROTECTION TOOL | 9 | |
| G601R521103-1 | COMPRESSION TOOL - GAS SPRING | 5 | |
| G601R521109-1 | COMPRESSION TOOL - GAS SPRING | 9 | |
| G601R521109−1 | Compression Tool − Gas Spring | 9 | |
| G601R523100 | RIGGING TOOL - AFT BAGGAGE-BAY DOOR COUNTERBALANCE-SPRING | 1 | |
| G601R523100-1 | I NSTALLATION TOOL - CARGO COMPARTMENT DOOR SPRING | 4 | |
| G601R523100-1-REVNC | I NSTALLATION TOOL - CARGO COMPARTMENT DOOR SPRING | 1 | |
| G601R523100−1 | Rigging Tool − Aft Baggage−Bay Door Counterbalance−Spring | 4 | |
| G670-271000-1 | DIGITAL PROTRACTOR - AILERON RIGGING TOOL | 2 | |
| G670271000-1 | DIGITAL PROTRACTOR - AILERON RIGGING TOOL | 2 | |
| G670271000−1 | Digital Protractor − Aileron and Flap Rigging Tool | 2 | |
| G700-521114-1 | DOOR KIT PR LOAD TORSION TOOL | 2 | |
| G71048-1 | 787 THREAD PROTECTOR TOOL | 10 | |
| GA111D | STETHOSCOPE, MECHANIC'S - 12 INCH PROBE (MINIMUM BUY QUANTITY IS 6) (SNAP-ON TOOLS CORP.) | 5 | |
| GA3538 | PROTO FLEXIBLE RETREAVING / HOLDING TOOLS | 1 | |
| GB808-022-000 | AIR PRESSURE CONTROL TOOL | 1 | |
| GF-95-00 | Tool for Pressure Switch | 1 | |
| GMI25-001 | PRESSURE DRAIN TOOL(COFFEE MACHINE) | 1 | |
| GMT201 | PRECISION CRIMP TOOL | 2 | |
| GMT202 | PRECISION CRIMP TOOL | 2 | |
| GP-10S | PRESSURE GAUSE ENERPAC TOOL (0-10000PSI) | 4 | |
| GR000067 | DRIVE BLOCK PRESSING-IN TOOL | 1 | |
| GRABNGOBLK | GRABNGO TOOL CARRIER PROTECTOR | 1 | |
| GS-2375 | PROFFESSIONAL TOOLS | 1 | |
| GS15572-1 | PROP DOME EXT TOOL | 1 | |
| GS15574-1 | TOOL PROPELLER SEAL | 18 | |
| GS18217 | PROTACTOR AVIATION TOOLING, ALTERNATIVE TO GS18217-1 | 3 | |
| GS18217-1 | TOOL (PROTRACTOR) | 2 | |
| GS20403-1 | TOOL (DOME PROTECTOR) | 2 | |
| GS20769-1 | TOOL, SPRING CALIBRATION | 1 | |
| GS20782-1 | TOOL 11/16â³ Turbo-Prop Wrench | 12 | |
| GS20840-8 | ATR PROP HUB PRESSURE TOOL | 1 | |
| GS20842-1 | BARREL PRESSURIZER TOOL | 14 | |
| GS20868-1 | COVER SPRING ASSY ADJUSTING TOOL | 1 | |
| GS20965-1 | TOOL PROP MOUNT ADAPTER PLATE | 5 | |
| GS21026-1 | TQ.MOTOR/COVER AND SPRING INSTALL.TOOL | 8 | |
| GS23413-1 | SEAL COMPRESSOR TOOL KIT | 17 | |
| GS23420-1 | PROP SEAL COMPRESSOR TOOL | 17 | |
| GS23435-1 | HUB PRESSURIZER TOOL | 16 | |
| GS234351 | HUB PRESSURE TOOL | 16 | |
| GS23437-1 | PROPELLER REMOVAL TOOL | 14 | |
| GS24619-1 | SEAL , COMPRESSOR TOOL | 1 | |
| GS47078-200 | TOOL-PRESSURE TRANSDUCERS REPLACEMENT | 1 | |
| GS47456 | ADJUSTMENT TOOL SET FOR PROXIMITY SWITCH | 1 | |
| GS47544 | COMPRESSION TOOL | 1 | |
| GS4H | TOOL-INSTALLATION, TIE STRAP_USED TO PROPERLY TENSION_BACS38K6 TIE STRAPS_[GS4H] | 5 | |
| GSB2700011 | BEARING,PROOF LOADING TOOL KIT | 1 | |
| GSB3080002 | TOOL, TEST, ICE DETECTOR PROBE | 1 | |
| GSB5260001 | TOOL-AIRSTAIR DOOR GAS SPRING INSTALLATION | 4 | |
| GSB5260001-B | TOOL; TOOL, A/S DOOR GAS SP; TOOL-GAS SPRING DOOR | 1 | |
| GSB6110003 | PROP ADAPTER TOOL | 2 | |
| GSB6110011 | TOOL-PROPELLER PITCH CHANGE | 4 | |
| GSB6110025 | TOOL-PROPELLER SEAL REMOVAL | 1 | |
| GSE123 | SPRING MOUNTING TOOL EMB 170/190 | 1 | |
| GSE123-170/190 | SPRING MOUNTING TOOL | 1 | |
| GSE5220851 | AIR SPRING COMPRESSION TOOL | 1 | |
| GSE55758 | TOOL-EXTENSION, SPRING | 1 | |
| GSE55787 | COMPRESSION TOOL LOCKING SPRING WING LANDING GEAR | 1 | |
| GSE55934 | Downlock spring extension tool | 1 | |
| GSE55952 | SPRING EXTENSION TOOL DOWNLOCK,LOCK STAY ASSY WING LANDING GEAR | 1 | |
| GSE56007 | TOOL - COMPRESSION, SHOCK STRUT BLG | 1 | |
| GSE56111 | TOOL - COMPRESSION, SHOCK STRUT WLG | 1 | |
| GSE56785 | RIGGING TOOL-PROXIMITY SENSORS,BLG | 1 | |
| GSE56785-101 | RIGGING TOOL-PROXIMITY SENSORS,BLG | 1 | |
| GSE56785-102 | RIGGING TOOL-PROXIMITY SENSORS,BLG | 1 | |
| GSE56785-103 | RIGGING TOOL-PROXIMITY SENSORS,BLG | 1 | |
| GSE57817 | COMPRESSION TOOL, SHOCK STRUT | 1 | |
| GSE59172-101 | MLG SPRING TOOL | 1 | |
| GSE7820604 | T/REV PRIMARY LOCK HOLD-OPEN TOOL | 1 | |
| GSEST NO.92 | PROPELLER SPECIAL TOOL KIT | 1 | |
| GT9910014-GT0001-0001 | SPRING COMPRESSION TOOL ASSY | 1 | |
| GT9910014-GT0001-0010 | TOOL, SPRING COMPRESSION | 1 | |
| GT9910014-GT0001-0050 | CARGO DOOR SRPING COMPRESSION TOOL ASSEMBLY | 1 | |
| GT9910014-GT0001-0055 | COMPRESSION TOOL, A220 CARGO DOOR SPRING | 1 | |
| GU16264 | BURNER SPRAY TOOL | 1 | |
| H140AMV218M | DAMPING SPRING CHECKING TOOL | 1 | |
| H1670 | JET Equipment & Tools H1670 Piston Ring Compressor Set - 2-78 to 4-38 | 1 | |
| H21833 | TOOL PREVENTING NUT | 1 | |
| H21969 | DE-PRESSURIZATION TOOL | 11 | |
| H21971 | NLG LOCK SPRING TENSION TOOL | 1 | |
| H21973 | MLG Lock Spring Tens Tool | 4 | |
| H47015 | TEST PLUG PRESSURE INDICATOR TOOL | 6 | |
| HARDWARETOOLS45IN1 | PROFESSIONAL HARDWARE TOOLS | 1 | |
| HC-1783 | GAUGE - PRESSURE, 0-3000 PSIG (0-20685 KPA) / SHOCK STRUT SERVICE TOOL | 4 | |
| HC130H0213-000 | CARGO DOOR SPRING TOOLS | 2 | |
| HC228591 | INSERTING TOOL (PRE-WIND TYPE) | 1 | |
| HC22892 | INSERTING TOOL (PRE-WIND TYPE) | 3 | |
| HC22943 | INSERTING TOOL (PRE-WIND TYPE) | 1 | |
| HC25569 | INSERTING TOOL(PRE-WIND TYPE) | 1 | |
| HE52B | HEADLAMP SPRING TOOL | 1 | |
| HEL7552-3 | INSTALLATION TOOL PRE WINDER | 1 | |
| HER51B4887 | COMPRESSING TOOL FOR WIRE ROPE | 1 | |
| HER51C887 | COMPRESSING TOOL FOR WIRE ROPE | 1 | |
| HH.HP5000.12000.2JIC | HIGH PRESSURE HOSE TOOL | 1 | |
| HH.LP1000.12000.2JIC | LOW PRESSURE HOSE TOOL | 1 | |
| HIX 3009-0G | PRECOOLER TOOL INSTALLATION | 2 | |
| HIX 3009−0G | PRECOOLER TOOL INSTALLATION | 2 | |
| HIX-3009-OG | PRECOOLER INSTALLATION TOOL | 2 | |
| HIX3009 | PRECOOLER TOOL INST | 7 | |
| HL-2-MK | TOOL - BONDE PRODUCTS | 1 | |
| HL-3-MK | TOOL - BONDE PRODUCTS | 1 | |
| HMO917324 | TOOL-SPRING MOUNTING | 1 | |
| HMU100-2 | TOOL KIT, WBHS PRESSURE TEST | 1 | |
| HPM-02 | RAT PRESSSURE MONITORING TOOL | 3 | |
| HPM02 | PRESSURE MONITOR TOOL | 3 | |
| HQD-010-HA | UNIONS/COUPLING FOR THE RAT TEST TOOL (MEASUREMENTS RETURN HOSE 33MM AND PRESSURE HOSE 31MM) | 3 | |
| HRK-02 | PRESSURE MONITOR TOOL - RAM AIR TURBINE | 2 | |
| HRK02 | PRESSURE MONITOR TOOL - RAM AIR TURBINE | 2 | |
| HRR683-6 | SPRING LOCK COUPLER TOOL | 1 | |
| HS2-23200 | NLG DOWNLOCK SPRING REMOVAL / INSTALLATION TOOL | 2 | |
| HSK6263-1 | FLIGHT DECK DECOMPRESSION TOOL | 35 | |
| HSK6263-11 | DECOMPRESSION TEST TOOL | 2 | |
| HU17738 | PRESS TOOL | 1 | |
| HU23959 | TOOL - OPENING, PR DOORS GG FAIRINGS | 1 | |
| HU26592 | Press Tool | 1 | |
| HU28491 | TOOL - EXTRACTOR AND ASSY , FUEL SPRAY NOZZLES | 3 | |
| HU29255 | EXTRACTOR - ASSY TOOL, FUEL SPRAY NOZZLES | 14 | |
| HU31261 | PRESSURE OIL DRAIN TOOL | 4 | |
| HU32498/2 | TOOL - SETTING (LPT SPEED SENSING PROBE) | 1 | |
| HU34332 | PRESSING TOOL | 2 | |
| HU36350 | EXTRACTOR - ASSY TOOL, FUEL SPRAY NOZZLES | 1 | |
| HU36560 | EXTRACTOR - ASSY TOOL, FUEL SPRAY NOZZLES | 2 | |
| HU37631 | LOADING TOOL-SPLINED NUT, LP COMPRESSOR | 1 | |
| HU38122-3 | IP PRTOR TURNING TOOL | 12 | |
| HU38642 | 787 EXT FUEL SPRAY NOZZLE TOOL | 9 | |
| HU39652 | EXTRACTOR-FUEL SPRAY NOZZLE TOOL | 6 | |
| HU40619 | IGNITION PLUG PROTRUSION TOOL | 5 | |
| HU43381 | PRESSING TOOL | 1 | |
| HU44274 | TOOL SURFACE PREPARATION | 3 | |
| HWP-312 | HAND INSTALLATION TOOL 5/16" PROTRUDING JO-BOLT | 1 | |
| HWP165 | HAND INSTALLATION TOOL 5/32" PROTRUDING JO-BOLT | 2 | |
| HWP312 | HAND INSTALLATION TOOL 5/16" PROTRUDING JO-BOLT | 1 | |
| HXE4AC | Battery Powered Open Frame Crimp Tool with a Pre-Tensioned Pushrod - 1.5 Ton | 2 | |
| HYD-135/145 | EC135, EC145, UH-72, COMPRESSION TOOL FOR HYDRAULIC-PACK PISTON | 1 | |
| IAE 2R19617 | INSERTION TOOL (PRE-WIND TYPE) | 1 | |
| IAE 2R19644 | INSERTION TOOL (PRE-WIND TYPE) | 1 | |
| IAE1R18593-1 | V2500 TUBE REPAIR KIT PRESSURE TOOLING KEY AUDIT PURPOSE | 1 | |
| IAE2R19425 | TOOL- PROBE, EDDY CURRENT INSPECTION | 2 | |
| IAE2R19429 | FAN BLADE ROOT NDT KIT TOOL ? DIFFERENT FROM ABOVE BLOCK AND PROBE? | 6 | |
| IAE4J12034 | V2500 HP COMPRESSOR LOCKING TOOL | 15 | |
| IAPL4101-12 | ANVIL STYLE PROOF LOAD TOOL FOR BEARING MS14101-12 | 1 | |
| IAPL4101-4 | ANVIL PRESS STYLE PROOF LOAD TOOL | 1 | |
| IDCT4101-12 | Drill Press Cutting Tool similar to RKC4101-12 | 1 | |
| IDCT4101-14 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 2 | |
| IDCT4101-4 | Drill Press Mounted CutterTool for bearing MS14101-4 | 1 | |
| IDCT4101-6 | Drill Press Cutting Tool for Bearing MS14101-6, MS14103-6. | 1 | |
| IDCT4103-10 | Drill Press Cutting Tool for Bearing MS14103-10 | 1 | |
| IDCT4103-12 | Drill Press Cutting Tool for Bearing MS14103-12 | 1 | |
| IDCT4103-5 | DRILL PRESS CUTTING TOOL FOR BEARING MS14103-5 | 1 | |
| IDCT4103-6 | Drill Press Cutting Tool for Bearings MS14101-6 and MS14103-6 ** RKC4103-6 is equivalent to IDCT4103-6** | 1 | |
| IDCT4103-8 | DRILL PRESS CUTTING TOOL FOR BEARING MS14103-8 | 1 | |
| IDCT4103-9 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| IDST-BACB10FH05G | DRILL PRESS TRI-ROLLER SWAGING TOOL TO SUIT BACB10FH05G BEARING | 1 | |
| IDST-M81936/1-22R | DRILL-PRESS TRI ROLLER SWAGING TOOL FOR BEARING M81936/1-22R | 1 | |
| IDST-P24490 | DRILL PRESS SWAGING TOOL | 2 | |
| IDST-S302T001-702 | DRILL PRESS SWAGGING TOOL | 1 | |
| IDST-S302T001-821 | DRILL PRESS SWAGGING TOOL | 1 | |
| IDST-S302T001-824 | DRILL PRESS SWAGGING TOOL | 1 | |
| IDST2128 | Drill Press Tri-Roller Swaging Tool for Bearing 412--010-427-101 | 2 | |
| IDST2311 | Drill Press Tri-Roller Swaging Tool to Equivalent RST2311 | 1 | |
| IDST2345 | Drill Press Tri-Roller Swaging Tool for Bearing 412-310-400-107 ** Technical Equivalent For RST2345 ** | 2 | |
| IDST2459 | DRILL PRESS TRI-ROLLER SWAGING TOOL EQUIVALENT TO | 2 | |
| IDST2832 | Drill Press Mounted Tri-Roller Swaging Tool Equivalent to RST2832 | 2 | |
| IDST4101-10 | Drill Press Tri-Roller Swaging Tool for Bearing MS14101-10. Equivalent to RST1013 | 1 | |
| IDST4101-12 | DRILL PRESS TRI-ROLLER SWAGING TOOL FOR BEARING MS14101-12 | 2 | |
| IDST4101-14 | Drill Press Tri-Roller Swaging Tool for Bearing MS14101-14 | 2 | |
| IDST4101-3 | Drill Press Tri-Roller Swaging Tool for Bearing MS14101-3 | 2 | |
| IDST4101-4 | DRILL PRESS SWAGING TOOL | 1 | |
| IDST4101-6 | Drill Press Tri-Roller Swaging Tool for Bearing MS14101-6, MS14103-6 | 2 | |
| IDST4101-9 | TOOL, DRILL PRESS SWAGING | 1 | |
| IDST4103-12 | DRILL PRESS TRI-ROLLER SWAGING TOOL | 1 | |
| IDST4103-5 | DRILL PRESS TRI ROLLER SWAGING TOOL FOR BEARING | 1 | |
| IDST4103-8 | DRILL PRESS TRI-ROLLER SWAGING TOOL | 1 | |
| IND79098 | Protection Tool | 1 | |
| INS AMPROBE 34XR | AMPROBE 34XR TOOL | 1 | |
| IP100-XL | PITOT PROBE COVERS INSTALLATION TOOL | 1 | |
| IP100SP24 | Sesame Technologies Pitot Probe Installation Tool/Pole P100SP24 | 1 | |
| IPCT4101-3 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| IPCT4101-6 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 2 | |
| IPCT4101-7 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 2 | |
| IPCT4103-6 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| IPCT4103-8 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| IPCT4103-9 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| IPCT7048 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| IPCT7065 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| IPCT7125 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| IPCTI-P21160 | SPECIAL PORTABLE CUTTING TOOL FOR BEARING P21160 WITH UPGRADED STEEL, STRONGER SPRING AND PVD COATING | 1 | |
| IPCTI-P21160P20 | SPECIAL PORTABLE CUTTING TOOL FOR BERAING P21160P20 AND P21160P30 WITH UPGRADE STEEL,STRONGER SPRING AND PVD COATING | 1 | |
| IPCTI-P21760 | SPECIAL PORTABLE CUTTING TOOL FOR BEARING P21760 WITH UPGRADED STEEL, STRONGER SPRING AND PVD COATING | 1 | |
| IPCTI-P22970 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| IPCTI-P24490 | SPECIAL PORTABLE CUTTING TOOL FOR BEARING P24490 WITH UPGRADED STEEL, STRONGER SPRING AND PVD COATING | 1 | |
| IPCTI-P2A2360 | PORTABLE CUTTING TOOL SUITABLE FOR BEARING P2A2360 AND P2A2360/P10 WITH UPGRADED STEEL, STRONGER SPRING AND PVD COATING | 1 | |
| IPIK4104-14/010 | PROOF LOAD TESTING TOOL AND BREAK AWAY TORQUE TESTING TOOL | 1 | |
| IPPLKS302T001-804 | PORTABLE PROOF LOAD TOOL | 1 | |
| IPPLKS302T001-805 | PORTABLE PROOF LOAD TOOL | 1 | |
| IPPLP-P22970 | PORTABLE PROOF LOAD TOOL FOR BEARING P22970 | 1 | |
| IPPLP-S302T001-804 | PORTABLE PROOF LOAD TOOL | 1 | |
| IPPLP-S302T001-805 | PORTABLE PROOF LOAD TOOL | 1 | |
| IPST4241 | TOOL, DRILL PRESS SWAGING | 1 | |
| IRC2115MBOOT | PROTECTIVE TOOL BOOT 2115TIMAX | 1 | |
| IRC2135MBOOT | PROTECTIVE TOOL BOOT | 1 | |
| IRC231BOOT | PROTECTIVE TOOL BOOT | 1 | |
| IRV-4-T-260 | HIGH PRESSURE RELIEF VALVE (VENDOR: GENERANT, TOOLPART OF PN: C36001-64) | 1 | |
| ITCT12986-01 | LOCKING TOOL LOW PRESS.ROTOR | 1 | |
| ITCT7494 | LOCKING TOOL LOW PRESS.ROTOR | 1 | |
| IV9420GL | INDUSTRIAL VIDEOSCOPE IPLEX G LITE-PROBE 4MM - ELECTRIC TOOL | 1 | |
| J07013-1 | EQUIPMENT-JACKING MLG AXLE (EMERGENCY)_B777-300ER TOOL INITIAL PROVISIONING_[J07013-1] | 11 | |
| J32007-1 | NLG THREAD PROTECTOR TOOL | 22 | |
| J32007-2 | NLG THREAD PROTECTOR TOOL | 13 | |
| J32031-12 | 787 PROTECTOR TOOL | 22 | |
| J32031-13 | MLG THREAD PROTECTOR TOOL | 13 | |
| J32037-102 | MLG&NLG SPRING EXPENDER R/I TOOL | 1 | |
| J32037-106 | SPRING REMOVE/INSTALL TOOL MLG & NLG | 19 | |
| J32037-92 | BASE TOOL-SPRING R/I EQPTMLG & NLG | 2 | |
| J36002 | Tool Rem/Inst Precooler | 1 | |
| J36020-1 | REMOVAL AND INSTALLATION TOOLING EQUIPMENT – PRECOOLER | 8 | |
| J36027 | PRECOOLER CLEANING TOOL | 1 | |
| J36027-1 | CLEANING TOOL - PRECOOLER | 2 | |
| J47094 | Compression Tool | 2 | |
| J47175 | Compression Tool | 2 | |
| J47176 | COMPRESSION TOOL | 1 | |
| J47237 | TOOL, WHEEL AXLE PROTRA | 1 | |
| J47309 | COMPRESSION TOOL | 1 | |
| J47548 | TOOL PROTECTOR AXLE | 38 | |
| J47548-1 | NLG AXLE THREAD PROTECTOR TOOL | 13 | |
| J47548-2 | A320 NLG THREAD PROTECTOR TOOL | 9 | |
| J47660 | COMPRESSION TOOL | 1 | |
| J47779 | MLG AXLE PROTECTOR TOOL | 32 | |
| J47947 | COMPRESSION TOOL | 1 | |
| J5-0275-2010 | Tool - Sealant Removal, BAC5000, PSD 6-184 Approved | 1 | |
| J52031-1 | TOOL - SPRING COMPRESSION, PASSENGER ENTRY DOORS | 2 | |
| J71063-15 | TOOL - LATCH, FAN COWL_B777-300ER TOOL INITIAL PROVISIONING_[ST9999CL] | 3 | |
| JAN-90 | A TOOL - SEALANT REMOVAL, BAC5000, PSD 6-184APPROVED | 1 | |
| JAT18128 | JIFFY® 1/16" Hex Wrench Tip for Pneumatic Installation Tools - NEW & IMPROVED 2nd GENERATION DESIGN! | 1 | |
| JAT18135 | JIFFY® 5/64" Hex Wrench Tip for Pneumatic Installation Tools - NEW & IMPROVED 2nd GENERATION DESIGN! | 1 | |
| JAT18142 | JIFFY® 3/32" Hex Wrench Tip for Pneumatic Installation Tools - NEW & IMPROVED 2nd GENERATION DESIGN! | 1 | |
| JAT18149 | JIFFY® 1/8" Hex Wrench Tip for Pneumatic Installation Tools - NEW & IMPROVED 2nd GENERATION DESIGN! | 1 | |
| JAW500GZ | TIRE PRESSURE CHECK TOOL | 1 | |
| JCSPTK-CK | PRO SNAP RING SERVICE TOOL KIT | 1 | |
| JEADASH8005 | PRESSURE REG RELIEF VALVE TOOL | 1 | |
| JIC4F | PRESSURE BLANK TOOL | 1 | |
| JMP-CF6-D-4037 | CF6-80C2 ENGINE WASH X2 PROBE TOOL | 1 | |
| JMP-CFM56-D-4435 | CFM56-2/5 ENGINE WASH X2 PROBE TOOL | 2 | |
| JMP-CFM56-D-4605 | CFM56-5B/C ENGINE WASH X2 PROBE TOOL | 3 | |
| JMP-PW4000-D-4856 | ENGINE WASH PROBE TOOL | 1 | |
| JMP-RB211-D-4153 | RB211 ENGINE X2 PROBE TOOL | 1 | |
| JMP-TRENT-D-4702 | TRENT 772 ENGINE WASH X2 PROBE TOOL | 4 | |
| JMP-V2500-D-4040 | V2500 ENGINE WASH X2 PROBE TOOL | 2 | |
| JMP/CFM56/D/1535/C300 | CFM56 Compressor Washing Rig c/w RR Tooling | 1 | |
| JMP/CFM56/D/4605 | CFM56-5B/C ENGINE WASH X2 PROBE TOOL | 3 | |
| JMP/GE90-115B/D/4948 | B777 (GE90) PROBE TOOL | 1 | |
| JMP/LEAP/D/7028 | TOOL - JUNIPER LEAP SHORT ENGINE WASH PROBES | 2 | |
| JNT411B60 | TOOL - SEALANT REMOVAL, BAC5000, PSD 6-184 APPROVE | 4 | |
| JNT411B90 | TOOL - SEALANT REMOVAL, BAC5000, PSD 6-184 APPROVED | 4 | |
| JOBCARDC-407 | RESERVOIR PRESS KIT TOOL | 1 | |
| K-032037-1 | TOOL PROTECTOR MLG | 1 | |
| K-5036 | KIT, PRE-COOLER LIFT TOOL | 2 | |
| K0378 | BOGIE COMPRESSION TOOL | 1 | |
| K12003-1 | FILL TOOL – HYDRAULIC STRUT, SEMI LEVER GEAR STANDARD PRACTICES – AIRFRAME | 4 | |
| K24011-1 | PROTOTYPE 787 TOOL | 1 | |
| K32002-1 | 787 NLG AXLE & THREAD PROTECTOR TOOL | 17 | |
| K32051-1 | COMPRESSION TOOL, RETAINER RING, SHOCK STRUT | 3 | |
| K35014-1 | INSTALLATION TOOL, DECOMPRESSION PANEL - BILGE BARRIER | 1 | |
| K49001-7 | 787 PROTECTOR THREAD TOOL | 9 | |
| K52004-1 | PULL IN SPRING TOOL | 1 | |
| K52010 | TOOL SPRING COMPRESSION PASSENGER ENTRY DOORS | 1 | |
| K52010-1 | 787 SPRING COMPRESSION TOOL | 8 | |
| K52032-1 | Installation/removal tool-edge protector | 5 | |
| K52046-1 | LOCATION TOOL - LATCHED PROXIMITY SENSOR, FORWARD AND AFT CARGO DOOR | 6 | |
| K53014-1 | INSTALLATION TOOL-DECOMPRESSIO | 5 | |
| K78006-1 | TOOL-PIN BLOCK VALV PROPUL AERO ENGINE | 11 | |
| K84-88-8387 | JET PIPE REMOVAL TOOL - JET PROVOST | 1 | |
| KA 2-1 | TOOL - PROBE | 1 | |
| KCC 113 | PROSKIT CRIMP TOOL | 1 | |
| KCC113S | PROSKIT CRIMP TOOL | 1 | |
| KCT890 | TRUCK BRAKE SPRING TOOL | 1 | |
| KCT895 | EATON TRUCK BRAKE SPRING TOOL | 1 | |
| KDS210-1E | NDT PROBE TOOL | 1 | |
| KHT8-757-01 | PROXIMITY SENSOR TESTER - GO-GAUGE ( USED AS DEACTUATOR TOOL ONLY & IS PART OF TEST SET KHT8-758-01 ) (ELDEC CORP.) | 1 | |
| KNEEPADS | KNEE PROTECTION TOOL | 1 | |
| KPC3-480-325 | TOOL-PITOT PROBE COVER | 20 | |
| KPHF-10 | TANGED PREWINDER HAND TOOL 5/8-18 | 1 | |
| KS6005 | PROTRACTOR - DIGITAL (MODEL PRO-3600) (KELL-STROM TOOL COMPANY INC.) | 14 | |
| KSA 0110S | PROSKIT CRIMP TOOL | 1 | |
| L133M6205101 | HUB SHAFT BUSHING REPLACEMENT TOOL KIT PRESSOUT/PRESSFITTOOL OR | 1 | |
| L133M6503101 | PRESSING TOOL | 2 | |
| L32 | EXTENSION,SOCKET WRENCH;BOTH ENDS 0.750";1ST END INTERNAL SQUARE#2ND END EXTERNAL SQUARE; STEEL;RIGID;|2.90" MIN AND 4.12" MAX;1.000" MAX;MANUAL TOOL;PLASTICS REMOVAL IN THE MARINE ENVIRONMENT (PRIME) PRODUCT; CHROMIUM;PROFESSIONAL/INDUSTRI | 4 | |
| L622P3001101 | HUB SHAFT BUSHING REPLACEMENT TOOL KIT PRESSOUT/PRESSFITTOOL OR | 1 | |
| L623M4003101D343-01 | PRESS IN TOOL | 1 | |
| L641G6001101 | TAIL BLADE PROTECTION TOOL | 1 | |
| L641G6002201 | TAIL BLADE PROTECTION TOOL | 1 | |
| L642G1002101 | PRESS IN CUFF BUSHINGS TOOL (SAP CODE 8334910) | 2 | |
| L652G3001121 | PRESS-IN AND PULLING TOOL | 1 | |
| L65723443A | PRESS IN TOOL | 1 | |
| L671M3012101D341-02 | PRESS-FIT TOOL | 1 | |
| L671M3012101D341-03 | PRESS-OUT TOOL | 1 | |
| L671M7003102D341-01 | PRESSING-IN TOOL | 1 | |
| L671M7003102D343-01 | PRESSING-IN TOOL | 1 | |
| LAN98F34103003000 | PITOT PRB FLSHNG TOOL (CONTROL TOOL) | 1 | |
| LIL39970 | TRUCK BRAKE SPRING TOOL FOR EA | 1 | |
| LIL39980 | TRUCK BRAKE SPRING TOOL | 1 | |
| LIL50600.01 | BRAKE SPRING TOOL | 1 | |
| LOCFAB003 | DEPRESSOR TOOL | 1 | |
| LS03-05003USBC1 | TOOL-PRESSURE TEST,ACT | 1 | |
| LST51311 | 277-6 Toolmakers Spring-Type | 1 | |
| LST65122 | BSC PRECSN MEASURING TOOL SETS | 1 | |
| LT 415 | PROFILE INSTALLATION TOOL | 1 | |
| LTCT13781-01 | Tool, Compressing | 1 | |
| LTCT1394 | PRESSURE TEST TOOL | 1 | |
| LTCT14514 | 52. STAKING TOOL COMPRESSOR ROTOR | 1 | |
| LTCT197 | SEPARATORTOOL(FRONT COMPRESSOR SHAFT) | 1 | |
| LTCT4051 | STAKING TOOL(FRONT COMPRESSOR SHAFT) | 2 | |
| LTCT7496-01 | Tool-locking HP compressor | 3 | |
| LTCT7660-01 | Tool Assembly, Compressor Blades Installation | 1 | |
| LTCT7969-01 | Tool, Compression, Bypass Valve Spring | 1 | |
| M0DEL16 | TOOL: TENSION COMPRESSOR | 1 | |
| M0NT733063 | TOOL ASSEMBLY, DISASSEMBLY SPRINGS | 1 | |
| M100848 | BEARING PULL TOOL ROTOR PROP | 1 | |
| M15570-20 | Tool - Contact Installation and Removal Previously Made by | 13 | |
| M21802 | NG SH COMPRESSION TOOL | 8 | |
| M21818 | Lower Pin Compress Tool | 9 | |
| M21836 | COMPRESSION TOOL | 2 | |
| M21924 | BRAKE UNIT PROTECTOR TOOL | 2 | |
| M21929 | TENSIONING FIXTURE TOOL (LOCK SPRING TOOL) | 26 | |
| M21934 | BRAKE DISC PROTECTIVE TOOL | 1 | |
| M21946 | COMPRESSION TOOL | 1 | |
| M21987 | COMPRESSION TOOL SPRING WASHERS | 1 | |
| M22520/1 | TOOL KIT PRODUCT CODE: DMC1186, REF: DMC | 1 | |
| M28TC0006000 | AAR PROBE TOOL | 1 | |
| M46155 | HP PROTECTTOOLS | 2 | |
| M46175 | COMPRESSION TOOL FOR SPRING | 1 | |
| M46175-1000 | COMPRESS TOOL | 1 | |
| M46226 | COMPRESSION TOOL FOR SPRING | 4 | |
| M46343 | COMPRESSION TOOL ACTUATOR SPRING | 2 | |
| M47380-100 | THREAD PROTECTOR TOOL | 12 | |
| M47381 | THREAD PROTECTOR TOOL | 27 | |
| M47382-100 | THREAD PROTECTOR TOOL | 27 | |
| M57588A0000-01 | PRESS-IN TOOL | 1 | |
| M57879A0000-01 | PRESS IN AND PRESS OUT TOOL | 1 | |
| M65723281 | PRESSURE LOSS TEST TOOL | 10 | |
| M65724023 | PRESS IN TOOL | 1 | |
| M65724042 | ACTUATOR SPRING COMPRESSION TOOL | 1 | |
| M65724042 (NP) - M65724294 or M65725603 | Actuator spring compression tool | 1 | |
| M65724291 | COMPRESSION TOOL | 1 | |
| M65724308 | PRELOAD ASSY INSTALLATION TOOL | 1 | |
| M65725103 | COMPRESSION TOOL | 1 | |
| M65725103A | COMPRESSION TOOL | 1 | |
| M65725325 | Press Tool | 1 | |
| M65725362 | COMPRESSION TOOL | 1 | |
| M65725379 | SPECIAL TOOL - ACM COMPRESSOR ADAPTER | 2 | |
| M65725510 | COMPRESSION TOOL | 1 | |
| M65725529 | COMPRESSION TOOL | 1 | |
| M65725594 | COMPRESSION TOOL | 1 | |
| M65725603 | COMPRESION TOOL | 1 | |
| M65725741-010 | COMPRESSION TOOL | 1 | |
| M65725741-020 | COMPRESSION TOOL | 1 | |
| M65725786 | COMPRESSION TOOL | 1 | |
| M65725793 | COMPRESSION TOOL | 1 | |
| M65725811 | COMPRESSION TOOL | 1 | |
| M65726006 | COMPRESSING TOOL | 1 | |
| M65726006-010 | COMPRESSING TOOL | 1 | |
| M65726006-020 | COMPRESSING TOOL | 1 | |
| M65726006-030 | COMPRESSING TOOL | 1 | |
| M65726006-050 | COMPRESSING TOOL | 1 | |
| M65726006-1 | COMPRESSING TOOL | 1 | |
| M65726006-2 | COMPRESSING TOOL | 1 | |
| M65726006-3 | COMPRESSING TOOL | 1 | |
| M65726006-4 | COMPRESSING TOOL | 1 | |
| M81969/14-02 | TOOL - CONTACT INSTALLATION AND REMOVAL PREVIOUSLY MADE BY "DESIGNED METAL CONNECTIONS" | 31 | |
| M81969/14/11 | TOOL - CONTACT INSTALLATION AND REMOVAL PREVIOUSLY MADE BY "DESIGNED METAL CONNECTIONS" | 30 | |
| M82000491 | PRESSURE PORT TOOL | 1 | |
| MBEU57831 | HPRU PISTON INSERTION TOOL | 1 | |
| ME65B40136-1 | MECHANICAL EQUIPMENT - PITOT STATIC PROBE (INSTALLATION TOOL FOR PITOT STATIC PROBE PROTECTIVE COVER) | 5 | |
| ME9026-0101 | TOOL FOR ELECTRICAL STOPS PRESETTING | 1 | |
| MEZ1500 | ELT PROGRAMMING TOOLING | 1 | |
| MF012-21-00 | PRESSURE GREASING TOOL KIT | 1 | |
| MGAR105001 | TOOL - PRE-ADJUSTMENT MICROSWITCH | 1 | |
| MH800 | Crimp Tool - ULTRA-PRECISION | 7 | |
| MIT162Z1832 | MISC TOOL DRILL JIG WING LE RIB INSTALLATION PROOF HOLE | 1 | |
| MIT311U0050SM2 | MISC TOOL, SPRING BEAM SHIMMING, UNDERWING FITTING GAP SET, OUTBD STRUT | 1 | |
| MIT340A5006-1 | NGS PRESSURE TEST TOOL KIT | 1 | |
| MIT340N5002-1 | MISCELLANEOUS TOOL NGS PRESSURE TOOL | 1 | |
| MIT617-1874-001 | DRIVE SPRING WINDING TOOL | 1 | |
| MIT65-73715-1 | MISC. TOOL ELEVATOR AND TAB TRAVEL PROTRACTOR | 2 | |
| MIT65-73715-1,-2 | MISC. TOOL ELEVATOR AND TAB TRAVEL PROTRACTOR | 1 | |
| MIT65-73715-2 | MISC. TOOL ELEVATOR AND TAB TRAVEL PROTRACTOR | 1 | |
| MIT65B07993-950 | Misc Tool, Press Flo | 1 | |
| MIT65B09877-1 | ASSEMBLY TOOL - SPRING CARTRIDGE, BULK CARGO DOOR | 2 | |
| MIT65B82591 | TOOL - COMPRESSION, CAP RING, NOSE GEAR STEERING ACTUATOR | 1 | |
| MIT813J3100-1 | 787 KU/KA ANTENNA PROVISIONS INST TOOL KIT (SPIDER TOOL) | 1 | |
| MITSM321U0000 | SPRING BEAM ANVIL SWAGE TOOL KIT | 3 | |
| MK7-ATIS-GBC-GH | PRESSURE GAUGE 350 PSI FOR TIRE INFLATOR TOOL | 4 | |
| MK7ATIS-002EL-EPRV | TIRE INFLATION TOOL W/EXCESS PRESSURE RELIEF VALVE | 1 | |
| MLGC01 | HYDRO Strut Compression Tool | 2 | |
| MML2D20B19 | TOOL INDICATOR PRESSURE | 1 | |
| MPBS1140AO | 40DEG BRK TOOL PRYBAR | 1 | |
| MRO608C3103 | SPL-15028 - ASSEMBLY TOOL - SPRING CLAMP, AUTO RESTOW | 1 | |
| MS-ST-500 | SWAGELOK PRE-SWAGING TOOL, 5/16" TUBE OD | 1 | |
| MS21921 | PRESETTING TOOL | 2 | |
| MS21922 | PRESETTING TOOL | 1 | |
| MT252-1 | BEARING PRESSING TOOL - TAIL ROTOR HUB | 1 | |
| MT516-1 | VALVE SPRING COMPRESSOR TOOL | 1 | |
| MT5252-1 | BEARIMG PRESSING TOOL-TAIL ROTOR HUB | 1 | |
| MT528-1 | C184 BEARING REMOVAL AND INSTALLATION TOOLS (FOR USE WITH HYDRAULIC PRESS) | 2 | |
| MT6020/20/028 | TOOL KIT, CONSUMABLE PRODUCTS | 1 | |
| MTPPRO-TOOL | MTPPRO-TOOL;MTP PRO Field Tool Polarity/Pin | 1 | |
| MTSATH1216R | ADJUSTABLE SPRING TOOL HOLDER | 1 | |
| N9881AD29000002000 | tank pressurization tool | 1 | |
| N9881AD29000002001 | A340 tank pressurization tool | 1 | |
| NAFPT-1 | FLARELESS PRESET TOOL | 1 | |
| NAFPT-10 | FLARELESS PRESET TOOL | 1 | |
| NAFPT-12 | FLARELESS PRESET TOOL | 1 | |
| NAFPT-14 | FLARELESS PRESET TOOL | 1 | |
| NAFPT-18 | FLARELESS PRESET TOOL | 1 | |
| NAS1581A3T10 | TOOL, SHIPPING COVER CPRSR INLET | 1 | |
| NC-3110 | 787 PROTECTIVE ICE COVER TOOL | 4 | |
| NC3110 | 787 PROTECTIVE ICE COVER TOOL | 4 | |
| NDT722-P1 | SPECIAL TOOLS PROBE POSITIONER | 2 | |
| NDT722-P2 | SPECIAL TOOLS PROBE POSITIONER | 2 | |
| NDT722-P3 | SPECIAL TOOLS PROBE POSITIONER | 2 | |
| NOV-98 | BEARING PRESSING TOOL | 1 | |
| NOXMMP-3 | SPRING TOOLS POP DISPLAY | 1 | |
| NT864 | RACK PRESS FOR PUNCH AND BASE TOOL | 1 | |
| NTG2604 | TYRE PRESSURE GAUGE TOOL | 1 | |
| NTG2604-D | TYRE PRESSURE GAUGE TOOL | 6 | |
| NTG2604-S | TIRE PRESSURE CHECK GAUGE TOOL | 5 | |
| NTG2604D | TOOL TIRE PRESSURE CHECK GAUGE | 6 | |
| OTC 4572 | DECOMPRESSOR TOOL DELTA HATRACK | 1 | |
| OU-50715 | COMPRESSION TOOL | 1 | |
| OU144949 | Protection Tool | 2 | |
| OU145018 | SPRING WASHER FITTING TOOL | 1 | |
| OU148561 | Protective Tool | 1 | |
| OU190844 | Pressure-off brake release tool | 29 | |
| P-CUT-BACB10FB04G | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| P-IPR-KIT-MS14101-7 | PORTABLE INSTALLATION, PROOF-LOAD, REMOVAL TOOL | 1 | |
| P-IPR-KIT-MS14103-7 | PORTABLE INSTALLATION, PROOF-LOAD, REMOVAL TOOL | 1 | |
| P1003 | CHERRY AEROSPACE TOOL PART, SPRING (1 PK) | 2 | |
| P18815DM-4 | PROBE ADAPTOR TOOL | 2 | |
| P3-03-0044-001 | SPT PROGRAMMING TOOL | 1 | |
| P3962669 | AGB TOOLS PROTECTION | 1 | |
| P3962670 | AGB TOOLS PROTECTIO | 1 | |
| P3962672 | AGB TOOLS PROTECTION | 1 | |
| P3962673 | AGB TOOL PROTECTION | 1 | |
| P3962674 | AGB TOOL PROTECTION | 1 | |
| P3962675 | AGB TOOLS PROTECTION | 1 | |
| P75701-3 | 757 PITOT PROBE ADAPTOR TOOL | 10 | |
| P75701-4C | TOOL, FLUSHING PITOT PROBE | 13 | |
| PAB0030 | TOOL,PENCIL PROBE,FREQUENCY RANGE OF 50 KHZ- 500 KHZ, 3IN. (76.2 MM) LONG, 0.125 IN. (3.175 MM) TIP DIAMETER, STRAIGHT, ABSOLUTE, BRIDGE, SHIELDED | 1 | |
| PAS-TW60-TOOL | PowerAll Systems PAS-TW-TOOL Pratt & Whitney PT-6 Turbine Wheel Wash Tool | 2 | |
| PBFT10 | METAL PRY AND FAB TOOL | 1 | |
| PBFT20 | HD WIDE TRIM REMOVAL PRY TOOL | 1 | |
| PBN10 | 90D L N/MAR PRY TOOL | 1 | |
| PBN11 | NRW WDG N/MAR PRY TOOL | 1 | |
| PBN12 | NRW PT N/MAR PRY TOOL | 1 | |
| PBN14 | NRW PT N/MAR PRY TOOL | 1 | |
| PBN15 | NONMARRING PRY TOOL 90 DEGREE | 1 | |
| PCA PROTECTOR PLATE | SPOILER PROTECTOR TOOL | 1 | |
| PERMASWAGE | PRESSURE GAUGE TOOL | 1 | |
| PGTEWIS | EWIS PRACTICAL TRAINING TOOLS | 1 | |
| PH1200 | Proheat Varitemp® Heat Guns (Description: Tool Only) (Add to cart: Add To Cart) | 2 | |
| PH1200K | Proheat Varitemp® Heat Guns (Description: Tool Only) (Add to cart: Add To Cart) (Description: Complete Kit) (Add to cart: Add To Cart) | 1 | |
| PH2200A1 | Proheat Varitemp® Heat Guns (Description: Tool Only) (Add to cart: Add To Cart) (Description: Complete Kit) (Add to cart: Add To Cart) (Description: Tool Only) (Add to cart: Add To Cart) | 1 | |
| PH2200A6 | Proheat Varitemp® Heat Guns (Description: Tool Only) (Add to cart: Add To Cart) (Description: Complete Kit) (Add to cart: Add To Cart) (Description: Tool Only) (Add to cart: Add To Cart) (Description: Tool Only) (Add to cart: Add To Cart) | 1 | |
| PH2200K-A1 | Proheat Varitemp® Heat Guns (Description: Tool Only) (Add to cart: Add To Cart) (Description: Complete Kit) (Add to cart: Add To Cart) (Description: Tool Only) (Add to cart: Add To Cart) (Description: Tool Only) (Add to cart: Add To Cart) (Description: Co | 1 | |
| PH2200K-A6 | Proheat Varitemp® Heat Guns (Description: Tool Only) (Add to cart: Add To Cart) (Description: Complete Kit) (Add to cart: Add To Cart) (Description: Tool Only) (Add to cart: Add To Cart) (Description: Tool Only) (Add to cart: Add To Cart) (Description: Co | 1 | |
| PHT5DP | DRK PRP TELECSOPIC PICKUP TOOL | 1 | |
| PHT5PB | PRL BLU TELESCOPIC PICKUP TOOL | 1 | |
| PKN7 | CRV TUBE PRY TOOL | 1 | |
| PL1400LH-CPL | CARPET PROTECTOR TOOL | 1 | |
| PLF1010 | TOOL, PROOF LOAD | 1 | |
| PLF1011 | TOOL, PROOF LOAD | 1 | |
| PLF1016 | TOOL, PROOF LOAD, RAM TYPE | 1 | |
| PLF1026 | TOOL, DRILL PRESS SWAGER | 1 | |
| PLF4101-10 | TOOL, PROOF LOAD | 1 | |
| PLF4101-8 | TOOL, PROOF LOAD | 1 | |
| PLF4103-14 | TOOL, PROOF LOAD | 1 | |
| PLF4103-4 | TOOL, PROOF LOAD | 1 | |
| PLF4103-6 | TOOL, PROOF LOAD | 1 | |
| PMXSSSC030 | PREC. MACHINE TOOLING BIT -30 | 1 | |
| PMXSSSC270 | PRODRILL TOOLING-LARGE | 1 | |
| PMXSSSC280 | PRODRILL MACHINE TOOLING BIT | 1 | |
| PMXSSSC420 | PRODRILL MACHINE TOOLING BIT | 1 | |
| PNS-1 | HOOVER PRESS-N-SNAP TOOL | 1 | |
| PNS-PTD | HOOVER PRESS-N-SNAP TOOL | 1 | |
| PPN1030 | 7IN NRW PRY/SMTH TOOL | 1 | |
| PPN2040 | 7IN MED PRY/SMTH TOOL | 1 | |
| PPN4050 | 7IN WIDE PRY/SMTH TOOL | 1 | |
| PR-3196 | PROLINE 3 TON HOIST TOOL | 1 | |
| PREN3545TOOL | PREN3545 CONNECTOR REM TOOL | 1 | |
| PRESSURE GAUGE | PRESSURE GAUGE TO TOOL 2C6395G05 | 2 | |
| PRT078418-1 | BEARING PRESSING TOOL | 1 | |
| PRT078829 | BEARING PRESS TOOL | 1 | |
| PRT079829 | BEARING PRESS TOOL | 1 | |
| PRT080170-1 | BEARING PRESSING TOOL | 1 | |
| PRYBAR | PRY BAR TOOL | 1 | |
| PSN500 | 5PC N/MAR PRY TOOL SET | 2 | |
| PT0832 | PRODUCTION HAND TOOL | 1 | |
| PWA 104224 | MECHANICAL INSPECTION TOOL SYSTEM (PRATT & WHITNEY – NDIP-662) | 1 | |
| PWA 12126 | HYD PRES BASE BRG REM TOOL | 2 | |
| PWA 75946A | NDI TOOL CONTROL PROBE | 1 | |
| PWA 85433 | ENGINE PRESERVATION TOOL | 7 | |
| PWA 85451 | ENGINE PRESERVATION TOOL | 4 | |
| PWA105287 | TOOL,SPREADER,MECHANICAL | 6 | |
| PWA107391 | INDEXING TOOL PRATT& WHITNEY | 1 | |
| PWA109760 | Pressure Tool | 1 | |
| PWA29351 | TOOL WRENCH,HAND-HIGH PRESSURE COMPR | 3 | |
| PWA57018 | TOOL COMPRESSION | 1 | |
| PWA77524 | HP COMPRESSOR TURNING TOOL | 1 | |
| PWA85433 | ADAPTOR FUEL PRESSURE TOOL | 7 | |
| PWA85451 | ADAPTOR FULE PRESSURE TOOL | 4 | |
| PWA87553 | CRIMPER TOOL - PRE-BEND | 2 | |
| PWC30336 | PROTECTOR SLEEVE (HOT SECTION INSPECTION TOOL | 8 | |
| PWC30458 | Locking Tool - Pratt & Whitney Canada | 10 | |
| PWC30464 | Flaring Tool - Pratt & Whitney Canada | 2 | |
| PWC30506 | TOOLS, FUEL NOZZLE SPRAY | 6 | |
| PWC31198 | COMPRESSOR WASH TOOL | 4 | |
| PWC31771 | SPREADER TOOL | 5 | |
| PWC31771-100 | SPREADER (HOT SECTION INSPECTION TOOL) | 8 | |
| PWC35200-100 | TOOL KIT - Pratt & Whitney Canada | 5 | |
| PWC35200-300 | TOOL KIT - Pratt & Whitney Canada | 4 | |
| PWC37306 | aligning tool - Pratt & Whitney Canada | 3 | |
| PWC37351 | aligning tool - Pratt & Whitney Canada | 6 | |
| PWC37844 | aligning tool - Pratt & Whitney Canada | 4 | |
| PWC38172 | PROP CARBON SEAL TOOL | 11 | |
| PWC38195 | PROP BRAKE TOOL | 10 | |
| PWC40904 | tool kit - Pratt & Whitney Canada | 4 | |
| PWC45206 | PRATT & WHITNEY FLEXIBLE FUEL NOZZLE TOOL KIT | 4 | |
| PWC50502 | Compressing Tool | 5 | |
| PWC50685 | Unstaking tool - Pratt & Whitney Canada | 2 | |
| PWC50716 | Staking Tool Gearbox - Pratt & Whitney Canada | 1 | |
| PWC51027 | unstaking tool - Pratt & Whitney Canada | 4 | |
| PWC51058 | Staking tool - Pratt & Whitney Canada | 1 | |
| PWC51130 | retaining ring tool - Pratt & Whitney Canada | 4 | |
| PWC51152 | aligning tool - Pratt & Whitney Canada | 5 | |
| PWC51767 | Retaining ring tool - Pratt & Whitney Canada | 3 | |
| PWC51778 | UNSTAKING TOOL CUPWSHR - Pratt & Whitney Canada | 2 | |
| PWC52079 | LOCKING TOOL (PRE-SB7426) | 1 | |
| PWC56429 | PROP BRAKE. SHAFT SEAL CARRIER INST. TOOL | 8 | |
| PWC56429-1-QI | PROP BRAKE. SHAFT SEAL CARRIER INST. TOOL | 1 | |
| PWC56616 | TOOL KIT FLEX FUEL NOZ 170 IN/LBS - Pratt & Whitney Canada | 7 | |
| PWC56825 | resizing tool - Pratt & Whitney Canada | 5 | |
| PWC56826 | resizing tool - Pratt & Whitney Canada | 5 | |
| PWC56851 | COVER - PRATT & WHITNEY ENGINE TOOLING | 8 | |
| PWC57131 | TOOL-PROPELLER DOWEL LINER INSTALLATION | 5 | |
| PWC57183 | TOOL-PROPELLER DOWEL LINER REMOVAL | 3 | |
| PWC57694 | PW150A COMPRESSOR WASH TOOL | 7 | |
| PWC57791 | TOOL-PROPELLER DOWEL LINER REMOVAL | 3 | |
| PWC57964 | TOOL, REMOVAL, PROPELLER DOWEL LINER | 2 | |
| PWC58876 | LIFTING TOOL - APS5000 - PRATT | 4 | |
| PWC59053 | ADAPTOR TOOL ( COMPRESSOR WASH) | 8 | |
| PWC61152 | NOZZLE, COMPRESSOR WASH, TOOL | 5 | |
| PWC62073 | Staking tool - Pratt & Whitney Canada | 4 | |
| PWC63412 | PRESERVATION RIG FUEL SYS--TOOL ENGINE PWC308C | 3 | |
| PWC64035 | staking tool - Pratt & Whitney Canada | 3 | |
| PWC64468 | PRV ADJUSTMENT Tool | 1 | |
| PWC64569 | Lapping tool - Pratt & Whitney Canada | 3 | |
| PWC64623 | Tool kit - Pratt & Whitney Canada | 2 | |
| PWC68779 | Clamping tool - Pratt & Whitney Canada | 3 | |
| PWC69488 | COMPRESSION TOOL SEAL | 1 | |
| PWC69597 | alignment tool - Pratt & Whitney Canada | 3 | |
| PWC69670 | COMPRESSION TOOL | 1 | |
| PWC69671 | COMPRESSION TOOL | 1 | |
| PWC70568 | COMPRESOR TOOL | 1 | |
| PWC71281 | PT6C-67C EDR Tool Kit - Pratt & Whitney Canada | 5 | |
| PWC71371 | PROTRACTOR Tool | 1 | |
| PWC72866 | FCU PRIMING TOOL | 2 | |
| PWC76195 | FCU Priming Tool | 2 | |
| PWC89835 | AIR COOLING TOOL - PRATT & WHITNEY CANADA | 4 | |
| PWC90025-013 | .032 PRE-SET SAFE-T-CABLE TOOL/W3" NOSE | 1 | |
| PWC90025-017 | .032 PRE-SET SAFE-T-CABLE TOOL/W7" NOSE | 2 | |
| PWC90025-03 | Cable Tool - Pratt & Whitney Canada | 4 | |
| PWC90025-07 | Cable Tool - Pratt & Whitney Canada | 3 | |
| PYLON OV/PRESS VALVE | ENG. PNU PYLON OV. PRESS VAL TOOL | 1 | |
| Q46498 | COMPRESSION TOOL | 7 | |
| Q47316 | MLG THREAD PROTECTOR TOOL | 32 | |
| Q47963 | COMPRESSION TOOL | 7 | |
| QA6498 | COMPRESSION TOOL | 1 | |
| QC6857-2R19441 | ANNULUS FILLER PROBE NDT V2500 TOOL | 1 | |
| QDTPMS | PRESET 4 IN.LB VALVE CORE TORQ TOOL | 3 | |
| QXXD2PT012PS06 | CORDLESS PRECISION SCREWDRIVER - POWER TOOLS | 1 | |
| R080-044-090-50 | RIGID BORESCOPE PROBE TOOL | 1 | |
| R080-24-045-50 | RIGID BORESCOPE PROBE TOOL | 1 | |
| R2182-0000 | MLG SPRING TOOL | 6 | |
| R21820 | SPRING TENSIONING TOOL | 2 | |
| R21820000 | Spring Tension Tool | 6 | |
| R21820000-1 | SPRING TENSIONING TOOL | 3 | |
| R404121000 | TERMINAL TNC 50 OHM LOAD ( USE WITH TOOL PR-600 ) | 1 | |
| R47163 | "TOOL FOR THE REMOVAL AND INSTALLATION OF THE SPRINGS (1-200)" | 1 | |
| R47226 | COMPRESSION TOOL | 1 | |
| R47961 | TOOL-COMPRESSION | 1 | |
| RALTU-PGRAM-MODULE | RALTU PROGRAMME MODULE TOOL | 1 | |
| RB T101599 | Pressing Tool | 3 | |
| RB T101607 | Pressure Default Tool | 1 | |
| RB T915 | Bearing Preload Tool | 1 | |
| RB6795596-M | Compression Rotor Disassembly/Assembly Tool C20/C20B | 2 | |
| RBA7300-507-ATP1 | Bungee Compression Tool | 1 | |
| RBD29985 | Bungee Spring Compressor Tool Rod & Channel | 2 | |
| RBE105-14101 W7 | PRESSING-IN TOOL | 2 | |
| RBE105-14101W18 | PRESSING-IN TOOL | 2 | |
| RBE105-14181W2 | PRESSING-IN TOOL | 2 | |
| RBE105-31702W25 | PRESSING TOOL | 1 | |
| RBE105-31702W4 | PRESSING-IN & PRESSING-OUT TOOL | 2 | |
| RBE105-42124W1 | PRESSING-IN TOOL | 2 | |
| RBE105-42124W3 | PRESSING-IN TOOL | 2 | |
| RBE1120-31547W1 | PRESSING-IN TOOL | 2 | |
| RBE117-15004W6 | PUSH OUT / PRESS IN TOOL | 2 | |
| RBE117-30002W2 | PRESSING-IN TOOL | 2 | |
| RBE117-44115W1 | PRESSING-IN TOOL | 2 | |
| RBE1X54-176-875 | Press Tool | 2 | |
| RBE671000702 | Press Staking Tool | 1 | |
| RBEM632V3024102 | ROTOR BRAKE SPRING CRUSH TOOL | 2 | |
| RBEVR-L11-0010-002-2 | Press Tool | 2 | |
| RBEVR-L11-0010-004-B | Press Tool | 1 | |
| RBEVR-L11-0010-005-B | Press Tool | 1 | |
| RBST1000 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST1001 | Drill Press Tri-Roller Staking Tool | 1 | |
| RBST1002 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST1003 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST1004 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST1005 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST1006 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST1007 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST1008 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST1009 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST1010 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST1011 | Drill Press Tri-Roller Staking Tool | 1 | |
| RBST1012 | Drill Press Tri-Roller Staking Tool | 1 | |
| RBST1013 | Drill Press Tri-Roller Staking Tool | 1 | |
| RBST1014 | Drill Press Tri-Roller Staking Tool | 1 | |
| RBST1015 | Drill Press Tri-Roller Staking Tool | 1 | |
| RBST1016 | Drill Press Tri-Roller Staking Tool | 3 | |
| RBST1017 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST1018 | Drill Press Tri-Roller Staking Tool | 1 | |
| RBST1019 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST1020 | Drill Press Tri-Roller Staking Tool | 1 | |
| RBST1034 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST1035 | Drill Press Tri-Roller Staking Tool | 1 | |
| RBST2001 | Drill Press Tri-Roller Staking Tool | 1 | |
| RBST2012 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST2014 | Drill Press Tri-Roller Staking Tool | 1 | |
| RBST2015 | Drill Press Tri-Roller Staking Tool | 1 | |
| RBST2017 | Drill Press Tri Roller Staking Tool | 2 | |
| RBST2020 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST2058 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST2059 | Drill Press Tri-Roller Staking Tool | 1 | |
| RBST2071 | Drill Press Tri-Roller Staking Tool | 1 | |
| RBST2087 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST2089 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST2120 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST2128 | Drill Press Tri-Roller Staking Tool | 3 | |
| RBST2162 | Drill Press Tri-Roller Staking Tool | 2 | |
| RBST2345 | Drill Press Tri-Roller Staking Tool | 3 | |
| RBST2369 | Drill Press Tri-Roller Staking Tool | 1 | |
| RBST2417 | Drill Press Tri-Roller Staking Tool | 1 | |
| RBST2939 | Drill Press Tri-Roller Staking Tool | 1 | |
| RBST2940 | Drill Press Tri-Roller Staking Tool | 1 | |
| RBT18507 | Frahm Spring Install/Remove Tool | 2 | |
| RBT18633 | Pressing Tool Work Aid | 1 | |
| RBT400318 | Pressing Tool Set, Bearing Install | 1 | |
| RBW109-3401-62-101 | TOOL COLLAR PROTECTION | 2 | |
| RBW6005G01431-3G | AW PROPELLER AND TAIL ROTOR CLEAR GAP INSPECTION TOOL | 3 | |
| RBW6005G01531-3G | AW PROPELLER AND TAIL ROTOR CLEAR GAP INSPECTION TOOL | 3 | |
| RBW6005G01631-3G | AW PROPELLER AND TAIL ROTOR CLEAR GAP INSPECTION TOOL | 3 | |
| RBW6005G01831-3G | AW PROPELLER AND TAIL ROTOR CLEAR GAP INSPECTION TOOL | 2 | |
| RBW6500X01611-W142F-3T | Oil Seal Removal Press Tool | 2 | |
| RBW6500X01611-W142H-3T | Tail Rotor Gear Box Output Oil Seal Removal & Press Tool | 1 | |
| RBW6510A00436W142B-3T | Bearing Assembly Press/Support Tool | 1 | |
| RBW6521A00138-W142G-3T | INPUT OIL SEAL REMOVAL PRESS TOOL, IGB INPUT | 2 | |
| RBW6521A00138-W142H-3T | Input Oil Seal Insert Press Tool, Igb Input | 1 | |
| RBW6521A00138-W142P-3T | Oil Seal Assembly Press Tool | 1 | |
| RBW6521A00138W142G-3T | Input Oil Seal Removal Press Tool, Igb Input | 2 | |
| RBW6521A00138W142K-3T | Press Tool | 1 | |
| RBW6521A00146W142C- 3T | SEAL PRESS TOOL | 2 | |
| RBW6521A00146W142C-3T | Seal Press Tool | 2 | |
| RBW6522A00231-W142AK-3T | Tail Rotor Gear Box/Mast Output Oil Seal Assembly Press Tool | 1 | |
| RBW6522A00231-W142H-3T | Tail Rotor Gear Box Input Oil Seal Removal And Press Tool | 1 | |
| RBW6522A00231W142G-3T | Press Tool | 1 | |
| RBW895-3101-04-117 | Main Rotor Blade Blocking And Protector Tool | 2 | |
| RBW895-3130- 02-101 | PRESSING TOOL,BUSHING | 2 | |
| RCAJ0014 | 7-Draw Tool Chest 229 PCS PRO MECH SET | 1 | |
| RCAZ0013 | 3-Draw Tool Chest 104 PCS PRO MECH SET | 1 | |
| RCK 4103-4 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RE080-012-090-60 | 6" RIGID PROBE TOOL | 1 | |
| RF170059 | TIRE PRESSURE GAUGEINFLATION TOOL | 1 | |
| RF377 | COMPRESSION MEASURING TOOL | 1 | |
| RF9820-DEK | PRESSING TOOL | 1 | |
| RFMYA100LT025 | ENGINE COMPRESSOR WATER TOOL | 1 | |
| RHCK1000 | PROOF TEST TOOLS-HOSE HALF COUPLER | 2 | |
| RHCK1002 | TOOL, PROOF LOAD | 2 | |
| RHGK1004 | PROOF TEST TOOLS-GAUGE | 2 | |
| RHK0302 | PROOF TEST TOOLS-CENTER PULL RAM | 1 | |
| RIGIDPROBE | RIGID PROBE TOOL | 1 | |
| RJ-032 | CARGO DOOR SPRING TOOLS (146/RJ) | 1 | |
| RKC4101-10 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 2 | |
| RKC4101-12 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 3 | |
| RKC4101-14 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 2 | |
| RKC4101-14DP | DRILL PRESS TRI-ROLLER SWAGING TOOL | 1 | |
| RKC4101-16 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC4101-3 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 2 | |
| RKC4101-4 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 3 | |
| RKC4101-5A | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 2 | |
| RKC4101-6 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 3 | |
| RKC4101-7 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 2 | |
| RKC4101-8 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 2 | |
| RKC4101-9 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 2 | |
| RKC4103 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC4103-10 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 2 | |
| RKC4103-12 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 2 | |
| RKC4103-14 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 2 | |
| RKC4103-16 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 2 | |
| RKC4103-3 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC4103-4 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 2 | |
| RKC4103-5 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 2 | |
| RKC4103-6 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 2 | |
| RKC4103-7 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 2 | |
| RKC4103-7A | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 2 | |
| RKC4103-8 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 2 | |
| RKC4103-9 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 4 | |
| RKC7009 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7010 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7011 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7012 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7013 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 2 | |
| RKC7014 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7016 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7023 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7025 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 2 | |
| RKC7028 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 2 | |
| RKC7029 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7031 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7032 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7035 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7037 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 2 | |
| RKC7042 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7043 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7045 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7046 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 2 | |
| RKC7048 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 2 | |
| RKC7049 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7051 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7052 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7053 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7054 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7055 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7064 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7065 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 2 | |
| RKC7066 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7067 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7068 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7069 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 2 | |
| RKC7070 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 2 | |
| RKC7071 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7072 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7073 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7074 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7075 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7076 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7082 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 2 | |
| RKC7083 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 2 | |
| RKC7088 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7091 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7095 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7096 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7097 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7098 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7102 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7111 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7116 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7117 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7120 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7121 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7122 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7123 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7124 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 2 | |
| RKC7125 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKC7390 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RKD5026D | TOOL, PROOF LOAD DRIVER | 1 | |
| RKD5026R | TOOL, PROOF LOAD RECEIVER | 1 | |
| RKD5050D | PROOF TEST TOOL | 1 | |
| RKD5050R | PROOF TEST TOOL | 1 | |
| RKH0300 | PROOF TEST TOOLS-HOSE PUMP AND HOSE | 4 | |
| RKS5028 | TOOL TO CUT LIP OF BEARING PRIOR TO REMOVAL | 1 | |
| RNX | RNX MULTI-USE VALVE CORE REMOVAL TOOL FOR PRESTA VALVES AND SCHRADER BICYCLE VALVES | 1 | |
| ROC476008 | PRECHAMBER REMOVAL TOOL | 1 | |
| ROC8M0030213 | PROPSHAFT TOOL. | 1 | |
| ROC8M0030456 | PROP TOOL. | 1 | |
| ROC8M0063321 | COMPRESSOR END CAP TOOL | 1 | |
| RPTK1004 | TOOL, IND. PROOF TEST | 2 | |
| RRT026594 | TOOL - PROTECTOR | 2 | |
| RRT027902 | PRESS TOOL | 1 | |
| RRT027919 | PRESS TOOL | 1 | |
| RRT028139 | LIFT TOOL - LIFT HP COMPRESSOR OUTER CASE FROM THE REAR | 1 | |
| RRT028286 | PRESS TOOL | 1 | |
| RRT028287 | PRESS TOOL | 1 | |
| RRT028292 | PRESS,TURN & EXTRACT TOOL | 1 | |
| RRT028299 | PRESS TOOL | 1 | |
| RRT028303 | PRESS AND EXTRACTION TOOL | 1 | |
| RRT028314 | PRESS TOOL | 1 | |
| RRT028322 | PRESS TOOL | 1 | |
| RRT028502 | IP COMPRESSOR STAGE 3 VANE STOP ALIGNMENT TOOL | 1 | |
| RRT028503 | IP COMPRESSOR STAGE 4 VANE STOP ALIGNMENT TOOL | 1 | |
| RRT028505 | IP COMPRESSOR STAGE 8 VANE STOP ALIGNMENT TOOL | 1 | |
| RRT028932 | CRIMP TOOL - CRIMP NEW WASHERS ON FUEL SPRAY NOZZELS | 5 | |
| RRT029440 | PRESS & EXTRACTION TOOL | 1 | |
| RRT030670 | COMPRESSION TOOL KIT AND RESIZER | 1 | |
| RRT030671 | COMPRESSION TOOL KIT AND RESIZER | 1 | |
| RRT046909 | PRESS TOOL | 1 | |
| RRT046961 | TURNING TOOL - ROTATE HP COMPRESSOR FOR BORESCOPE INSPECTION | 3 | |
| RRT046961-1 | TURNING TOOL - ROTATE HP COMPRESSOR FOR BORESCOPE INSPECTION | 2 | |
| RRT072428 | TOOL, PRESSURE FILL ADAPTER | 3 | |
| RRT095118 | Pressing Tool | 1 | |
| RRT095945 | IP COMPRESSOR TURNING TOOL | 2 | |
| RRT095945-1 | TURNING TOOL, IP COMPRESSOR VIA GEARBOX BREATHER | 1 | |
| RRT1011655 | COMPRESSION TOOL | 1 | |
| RRT101655 | COMPRESSION TOOL | 1 | |
| RRT108135 | TOOL PROBE DELIVERY DEVICE | 1 | |
| RRT115481 | PRESS TOOL | 1 | |
| RRT116296 | CASTELLATED PRESS TOOL | 1 | |
| RS3 | AMPROBE TOOL | 1 | |
| RSE1015 | THREAD PROTECTOR TOOL | 4 | |
| RSE1069 | ALNMNT TOOL-PRECLER DUCT-(SHOP ONLY)SEE RSE1120 | 2 | |
| RSE1069 REV C | ALNMNT TOOL-PRECLER DUCT-(SHOP ONLY)SEE RSEII20 | 1 | |
| RSE1089 | ALNMNT TOOL-CHNNL UPR FRNG SEAL T/R DOOR L/H & R/H | 1 | |
| RSE1089 REV NC | ALNMNT TOOL-CHNNL UPR FRNG SEAL T/R DOOR LH & RH | 1 | |
| RSE1090 | ALNMNT TOOL-CHNNL UPR FRNG SEAL T/R DOOR L/H & R/H | 1 | |
| RSE1090 REV NC | ALNMNT TOOL-CHNNL UPR FRNG SEAL T/R DOOR LH & RH | 1 | |
| RSE1120 | ALIGNMNET TOOL PRECOOLER DUCT (SHOP & LINE USE) | 3 | |
| RSE1120 REV E | ALIGNMENT TOOL PRECOOLER DUCT (SHOP & LINE USE) | 1 | |
| RSE1131 | TOOL ALIGN PRECOOLER | 1 | |
| RSE1187 | SCRIBE & DRILL TOOLSPRAY COOLER DBL. R/H | 1 | |
| RSE1187 REV NC | SCRIBE & DRILL TOOLSPRAY COOLER DBL. RlH | 1 | |
| RSE3492 | LOCK TOOL-PRIMARY | 4 | |
| RSE3492 REV C | PRIMARY MANUAL UNLOCK TOOL | 1 | |
| RSEI069 | ALNMNT TOOL-PRECLER DUCT-(SHOP ONLY)SEE RSEII20 | 1 | |
| RSEI089 | ALNMNT TOOL-CHNNL UPR FRNG SEAL T/R DOOR LH & RH | 1 | |
| RSEI090 | ALNMNT TOOL-CHNNL UPR FRNG SEAL T/R DOOR LH & RH | 1 | |
| RSIK1 | KIT SAFETY-RAT,INTERFACE THIS TOOL IS USED TO PROTECT THE RAT DURING TEST IN CASE OF RAT-TEST- MOTOR FAILURE (LEACKAGE OF THE DRIVE SHAFT SEAL). | 10 | |
| RST1000 | TOOL, DRILL PRESS SWAGING | 2 | |
| RST1001 | TOOL, DRILL PRESS SWAGING | 1 | |
| RST1002 | TOOL, DRILL PRESS SWAGING | 3 | |
| RST1003 | TOOL, DRILL PRESS SWAGING | 2 | |
| RST1004 | TOOL, DRILL PRESS SWAGING | 2 | |
| RST1005 | TOOL, DRILL PRESS SWAGING | 3 | |
| RST1006 | TOOL, DRILL PRESS SWAGING | 3 | |
| RST1007 | TOOL, DRILL PRESS SWAGING | 3 | |
| RST1008 | TOOL, DRILL PRESS SWAGING | 2 | |
| RST1009 | TOOL, DRILL PRESS SWAGING | 2 | |
| RST1009LF1ST | TOOL, DRILL PRESS SWAGING | 1 | |
| RST1010 | TOOL, DRILL PRESS SWAGING | 2 | |
| RST1011 | TOOL, DRILL PRESS SWAGING | 2 | |
| RST1012 | TOOL, DRILL PRESS SWAGING | 2 | |
| RST1013 | TOOL, DRILL PRESS SWAGING | 2 | |
| RST1014 | TOOL, DRILL PRESS SWAGING | 2 | |
| RST1015 | TOOL, DRILL PRESS SWAGING | 2 | |
| RST1016 | TOOL, DRILL PRESS SWAGING | 2 | |
| RST1017 | TOOL, DRILL PRESS SWAGING | 2 | |
| RST1018 | TOOL, DRILL PRESS SWAGING | 2 | |
| RST1019 | TOOL, DRILL PRESS SWAGING | 2 | |
| RST1020 | TOOL, DRILL PRESS SWAGING | 2 | |
| RST1034 | TOOL, DRILL PRESS SWAGING | 1 | |
| RST2014 | TOOL, DRILL PRESS SWAGING | 1 | |
| RST2071 | DRILL PRESS SWAGING TOOL | 1 | |
| RST2087 | DRILL PRESS TRI-ROLLER STAKING TOOL | 1 | |
| RST2120 | DRILL PRESS STAKING TOOL | 2 | |
| RST2128 | DRILL PRESS TRI-ROLLER STAKING TOOL | 2 | |
| RST2153 | DRILL PRESS BRG TRI-ROLLER SWAGING TOOL | 2 | |
| RST2162 | DRILL PRESS STAKING TOOL | 3 | |
| RST2167 | ROLLER BEARING SWAGGING TOOL DRILL PRESS | 2 | |
| RST2199 | DRILL PRESS SWAGING TOOL | 1 | |
| RST2200 | DRILL PRESS SWAGING TOOL | 1 | |
| RST2209 | DRILL PRESS SWAGING TOOL | 1 | |
| RST2345 | DRILL PRESS TRI-ROLLER STAKING TOOL | 2 | |
| RST2364 | DRILL PRESS SWAGING TOOL | 2 | |
| RST2399 | TOOL, STAKING, DRILL PRESS | 1 | |
| RST2403 | TOOL, STAKING, DRILL PRESS | 1 | |
| RST2413 | TOOL, STAKING, DRILL PRESS | 1 | |
| RST2425 | TOOL, SWAGE DRILL PRESS | 2 | |
| RST2428 | DRILL PRESS SWAGING TOOL | 2 | |
| RST2459 | DRILL PRESS TRI-ROLLER SWAGING TOOL EQUIVALENT TO RST2459 | 3 | |
| RST2481 | TOOL, STAKING, DRILL PRESS | 1 | |
| RST2482 | TOOL, DRILL PRESS SWAGING | 1 | |
| RST2487 | DRILL PRESS SWAGING TOOL | 1 | |
| RST2512 | Drill Press Bearing Swaging Tool | 2 | |
| RST2522 | DRILL PRESS SWAGING TOOL | 2 | |
| RST2523 | Drill Press Bearing Swaging Tool | 1 | |
| RST2525 | DRILL PRESS SWAGING TOOL | 1 | |
| RST2528 | DRILL PRESS SWAGING TOOL | 1 | |
| RST2546 | DRILL PRESS SWAGING TOOL | 1 | |
| RST2548 | DRILL PRESS SWAGING TOOL | 1 | |
| RST2687 | TOOL, SWAGING DRILL PRESS | 1 | |
| RST2748 | TOOL, DRILL PRESS SWAGING | 1 | |
| RST2882 | TOOL, DRILL PRESS | 1 | |
| RST2883 | TOOL, DRILL PRESS | 2 | |
| RST2961 | DRILL-PRESS TRI ROLLER SWAGING TOOL FOR BEARING M81936/1-22R | 1 | |
| RST4035 | TOOL, SWAGING DRILL PRESS | 1 | |
| RST4093 | DRILL PRESS SWAGING TOOL | 1 | |
| RST4137 | TOOL, STAKING, DRILL PRESS | 1 | |
| RST4138 | TOOL, STAKING, DRILL PRESS | 1 | |
| RST4160 | TOOL, STAKING, DRILL PRESS | 1 | |
| RST4188 | TOOL, DRILL PRESS SWAGING | 1 | |
| RST4236 | DRILL PRESS SWAGGING TOOL | 1 | |
| RST4238 | TOOL, DRILL PRESS SWAGING | 1 | |
| RST4241 | TOOL, DRILL PRESS SWAGING | 1 | |
| RST4265 | TOOL, DRILL PRESS SWAGING | 1 | |
| RST4296 | TOOL, DRILL PRESS SWAGING | 1 | |
| RST4316 | TOOL, STAKING, DRILL PRESS | 1 | |
| RST4462 | TOOL, STAKING, DRILL PRESS | 1 | |
| RST4504 | TOOL, DRILL PRESS SWAGING | 1 | |
| RST4606 | TOOL, SWAGING DRILL PRESS | 1 | |
| RST4680 | TOOL, DRILL PRESS | 1 | |
| RST4733 | TOOL, DRILL PRESS | 1 | |
| RST5054 | TOOL, DRILL PRESS SWAGING | 1 | |
| RST5099 | TOOL, STAKING, DRILL PRESS | 1 | |
| RST5100 | TOOL, STAKING, DRILL PRESS | 1 | |
| RST5101 | TOOL, STAKING, DRILL PRESS | 1 | |
| RST5102 | TOOL, STAKING, DRILL PRESS | 1 | |
| RST5112 | TOOL, DRILL PRESS CUTTER | 1 | |
| RST5137 | TOOL, DRILL PRESS | 1 | |
| RST5139 | TOOL, DRILL PRESS | 1 | |
| RT-103-9 | TOOL, DRILL PRESS SWAGIN | 1 | |
| RT210/2/85003 | RELEASE TOOL FOR SOK SPRING BAND CLAMPS | 1 | |
| RT21002085006 | RELEASE TOOL FOR SOK SPRING BAND CLAMPS | 1 | |
| S11100112CS20KS | PRONER HAND CRIMPING TOOLS | 1 | |
| S47032 | Compression Tool | 2 | |
| S47263 | END FITTING COMPRESSION TOOL | 1 | |
| S47264 | COMPRESSION TOOL | 1 | |
| S47269 | COMPRESSION AND DECOMPRESSION TOOL | 1 | |
| S48356 | BACK-UPRINGINSTALLATIONTOOL | 1 | |
| S48432 | COMPRESSION TOOL | 3 | |
| S7025501 | TOOL - PR 550 PROGRAMMER | 3 | |
| S7025502 | PROGRAMING TOOL | 1 | |
| SA010229 | CARBON BRAKE PROBE, OXIDATION CHECK TOOL | 7 | |
| SA010498 | PRESSING IN TOOL | 1 | |
| SA610 | TOOL - DYNAMIC RIGGING, SIGNAL PROCESSING SYSTEMS | 1 | |
| SAM20146 | DRIVE BLOCK PRESSING-IN TOOL | 1 | |
| SAMSON | SPRING BALANCE TOOL | 1 | |
| SAT-1391-101 | MLG BELLCRANK SPRING TOOL | 1 | |
| SAT1417-7 | GAS SPRING TOOL | 1 | |
| SBA320-34-1263 | PITOT PROBE DEBURRING KIT TOOL | 1 | |
| SBA330-38-3029 | 10MD PRESSURE SWITCH SIM TEST TOOL | 1 | |
| SCD5019 | TOOL - SEALANT REMOVAL, BAC5000, PSD 6-184 APPROVED | 1 | |
| SCT203 | Pre-Set Tension, Hand Operated, Safe-T-Cable Application Tool with 3 Inch Nose for .022 Safe-T-Cable | 2 | |
| SCT207 | Pre-Set Tension, Hand Operated, Safe-T-Cable Application Tool with 7 Inch Nose for .022 Safe-T-Cable | 2 | |
| SCT323 | Pre-Set Tension Safe-T-Cable Application Tool with 3 Inch Nose for .032 Safe-T-Cable | 3 | |
| SCT325 | Pre-Set Tension, Hand Operated, Safe-T-Cable Application Tool with 5 Inch Nose for .032 Safe-T-Cable | 2 | |
| SCT327 | Pre-Set Tension, Hand Operated, Safe-T-Cable Application Tool with 7 Inch Nose for .032 Safe-T-Cable | 5 | |
| SCT327L | .032 Safe-T-Cable Application Tool with Low-Profile 7" Nose | 2 | |
| SCT403 | Pre-Set Tension, Hand Operated, Safe-T-Cable Application Tool with 3 Inch Nose for .040 Safe-T-Cable | 2 | |
| SCT407 | Pre-Set Tension, Hand Operated, Safe-T-Cable Application Tool with 7 Inch Nose for .040 Safe-T-Cable | 2 | |
| SCTN32-3L | 3" Low Profile Nose for .032 Safe-T-Cable Application Tool | 2 | |
| SCTN32-7L | 7" Low Profile Nose for .032 Safe-T-Cable Application Tool | 2 | |
| SCTP203 | Preset Pneumatic Safe-T-Cable Application Tool with 3 Inch Nose for .022" Safe-T-Cable | 2 | |
| SCTP207 | Preset Pneumatic Safe-T-Cable Application Tool with 7 Inch Nose for .022" Safe-T-Cable | 2 | |
| SCTP323 | Preset Pneumatic Safe-T-Cable Application Tool with 3 Inch Nose for .032" Safe-T-Cable | 2 | |
| SCTP327 | Preset Pneumatic Safe-T-Cable Application Tool with 7 Inch Nose for .032" Safe-T-Cable | 2 | |
| SCTP403 | Preset Pneumatic Safe-T-Cable Application Tool with 3 Inch Nose for .040" Safe-T-Cable | 2 | |
| SCTP407 | Preset Pneumatic Safe-T-Cable Application Tool with 7 Inch Nose for .040" Safe-T-Cable | 2 | |
| SCTPRM-TW-SA | Replacement Tension Wheel Sub-Assembly for the SCTPRM Pneumatic Tools | 1 | |
| SCTR327L | .032 Rotary Safe-T-Cable Application Tool/W 7" Low-Profile Nose | 3 | |
| SE 72-6001 | Engine Oil Press Relief Vivadj Tool | 5 | |
| SE72-6001 | Adjusting Tool Assembly -Relief Valve. Oil Pressure | 5 | |
| SE8787 | TOOL KIT PREPARATION STRUCTURAL REPAIR | 1 | |
| SE8788 | TOOL KIT PRESSURE STRUCTURAL REPAIR | 1 | |
| SF5327-1 | PRESSURE TOOL | 1 | |
| SG 29-TP1PT35A | DZUS LOCKS PRESSING TOOL | 1 | |
| SG 350A93-3206-21 | SHAFT PROTECTION TOOL | 1 | |
| SGMTK2 | ARMSTRONG, MASTER TOOL SET, NUMBER OF PIECES: 250, PRIMARY APPLICATION: MECHANIC | 1 | |
| SGP-156 | PROBE APPLICATION TOOL | 1 | |
| SIC3500-001 | 001HIGH PRESSURE STRUT SERVICE TOOL 0 - 3500 PSI | 8 | |
| SIC800-001 | LOW PRESSURE STRUT SERVICE TOOL 0-800 PSI | 1 | |
| SK VB1152 | NOSE GEAR DOWNSPRING DISASSEMBLY/REASSEMBLY TOOL | 1 | |
| SK VB1153 | NOSE GEAR DOWNSPRING REMOVE/INSTALL TOOL | 1 | |
| SK17871 | COMPRESSION TOOL | 1 | |
| SKSP1404-1 | Compression Tool | 1 | |
| SLUGS | PROXIMITY SENSOR TOOL | 1 | |
| SM705 | DECOMPRESSOR FROM JMP/CFM56/D/4777/C200 ENGINE CLEANOUT TOOL | 1 | |
| SMT-A-IPR-KIT-MS14101-9 | THIS IS AN ARBOR PRESS INSTALLATION, PROOF-LOAD, REMOVAL TOOL FOR BEARING MS14101-9 | 1 | |
| SMT-P-IPR-KIT-MS14101-9 | HIS IS A PORTABLE INSTALLATION, PROOF-LOAD, REMOVAL TOOL FOR BEARING MS14101-9 | 1 | |
| SMT-RST-.970-312 | HIS IS A DRILL PRESS TRI-ROLLER SWAGING TOOL FOR BEARING MS14101-9 | 1 | |
| SP20-46 | TOOL, PREWINDER, INSERT | 1 | |
| SPBS18R | PRYBAR TOOL | 1 | |
| SPL-11837 | Compression Cap Ring Tool | 1 | |
| SPL-9811 | THREAD PROTECTOR & ALIGNMENT TOOLS | 1 | |
| SPL-9812 | THREAD PROTECTOR & ALIGNMENT TOOLS | 1 | |
| SPM1010/ | PRESSING TOOL BELVAL | 1 | |
| SPRAY-CLEANER | SPRAY CLEANER GUN TOOL | 1 | |
| SPRG618G | SPRING TOOL PUSH PULL 3/16IN | 1 | |
| SPRG618O | SPRING TOOL PUSH PULL 3/16IN | 1 | |
| SPRG618R | SPRING TOOL PUSH PULL 3/16IN | 1 | |
| SPRG625G | SPRING TOOL PUSH PULL 1/4IN | 1 | |
| SPRG625O | SPRING TOOL PUSH PULL 1/4IN | 1 | |
| SPRG625R | SPRING TOOL PUSH PULL 1/4IN | 1 | |
| SPRING COMPRESSOR | A321 EMERGENCY EXIT SPRING COMP TOOL | 1 | |
| SPRINGBALANCE | SPRING BALANCE TOOL | 1 | |
| SS2910 | AF1 AIR TOOL PROP | 1 | |
| SSTMD36BC3 | PRESSURE SENSOR TOOL | 1 | |
| ST-115 | TOOL, INSTALL AND REMOVE PROPELLER FLANGE BUSHING | 2 | |
| ST-25 | SPRING PRESSING TOOL | 2 | |
| ST0024205 | TOOL RIM DEPRESSOR | 1 | |
| ST1060-20 | Standard Tool - Decompression Fork | 1 | |
| ST1066-10 | INSTALLATION TOOL AIR SEAL,RUBBER SEALANT SPREADER | 1 | |
| ST2575C | STANDARD TOOL - FENWAL CONNECTORS, SLEEVE AND PIN PRESS TOOL, BAC5162-64 | 2 | |
| ST2575C-1 | Press Tool Assy | 3 | |
| ST2580-524 | PRELOAD TOOL GUIDE PIN | 2 | |
| ST2580-524-1 | Preload Tool Guide Pin Assy | 2 | |
| ST30-8783 | ROAD MAP, TEST TOOL BEARING, PROOF LOAD TEST | 1 | |
| ST30-8783-11 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-12 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-13 | Road map,test tool bearing proof load test | 2 | |
| ST30-8783-14 | Road map,test tool bearing proof load test | 2 | |
| ST30-8783-15 | Road map,test tool bearing proof load test | 2 | |
| ST30-8783-16 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-17 | Road map,test tool bearing proof load test | 2 | |
| ST30-8783-18 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-19 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-2 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-20 | Road map,test tool bearing proof load test | 3 | |
| ST30-8783-21 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-22 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-23 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-24 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-25 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-26 | TEST TOOL, BEARING PROOF LOAD TEST, | 2 | |
| ST30-8783-27 | TEST TOOL, BEARING PROOF LOAD TEST, | 3 | |
| ST30-8783-28 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-29 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-3 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-30 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-31 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-32 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-33 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-4 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-5 | TEST TOOL, BEARING PROOF LOAD TEST, | 2 | |
| ST30-8783-6 | TEST TOOL, BEARING PROOF LOAD TEST, | 2 | |
| ST30-8783-7 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-8 | TEST TOOL, BEARING PROOF LOAD TEST, | 2 | |
| ST30-8783-9 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783A-15 | TOOL-BEARING PROOF LOAD TEST | 3 | |
| ST30-8783A-19 | PROOF LOAD TEST TOOL | 3 | |
| ST30-8783A-43 | PROOF LOAD TEST TOOL | 2 | |
| ST30-8783A-5 | BEARING PROOF LOAD TEST TOOL | 1 | |
| ST56575S0000 | PRESS IN PRESS OUT TOOL | 1 | |
| ST6760 | STANDARD TOOL - ULTRASONIC LEAK PROBE TOOL | 1 | |
| ST6760A | STANDARD TOOL - ULTRASONIC LEAK PROBE TOOL | 2 | |
| ST6760A-1 | LEAK PROBE TOOL | 5 | |
| ST7483 | WASHER PRESS TOOL | 1 | |
| ST7484 | SPINDLE GEAR PRESS TOOL (2 IT) | 1 | |
| ST869EA-400 | PRESSURE TEST TOOL | 1 | |
| ST869EA-450 | PRESSURE TEST TOOL | 1 | |
| ST869EA-600 | PRESSURE TEST TOOL | 1 | |
| ST869FB-400-F | Pressure test tool medium duty flange | 1 | |
| ST869FB-400-M | Pressure test tool medium duty flange | 1 | |
| ST869FC-550-F | PRESSURE TEST TOOL | 1 | |
| ST8711J | STANDARD TOOL - GAUGE PROTRUSION, HEX DRIVE BOLT WITH LOCKBOLT COLLARS | 1 | |
| ST8711J-6 | Standard Tool - Gage Protrusion, Hex Drive Bolt | 1 | |
| ST8783-6 | STANDARD TOOL - ASSEMBLY, PROOF LOAD TEST EQUIPMENT, BACB10FB08GC BEARING INSTALLATION | 1 | |
| ST8783F | STANDARD TOOL - BEARING RETENTION PROOF TEST | 1 | |
| ST8783F-0625-035-16 | Standard tool bearing retention proof test | 2 | |
| ST8783F-0687-033-16 | Standard tool bearing retention proof test | 1 | |
| ST8783F-0688-033-16 | Standard tool bearing retention proof test | 2 | |
| ST8783F-0750-038-16 | PROOF LOAD TEST TOOL | 1 | |
| ST8783F-0750-039-16 | Standard tool bearing retention proof test | 1 | |
| ST8783F-0781-039-16 | Standard tool bearing retention proof test | 2 | |
| ST8783F-0906-045-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-0969-054-16 | Standard tool bearing retention proof test | 2 | |
| ST8783F-1-1437-075 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1-1563-084 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1-1912-111 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1-2065-111 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1-2360-134 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1000-063-1 | PROOF LOAD TEST TOOL | 1 | |
| ST8783F-1010-063-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1094-058-1 | Standard tool bearing retention proof test | 3 | |
| ST8783F-1187-075-1 | BEARING PROOF LOAD TEST TOOL | 1 | |
| ST8783F-1218-068-1 | Standard tool bearing retention proof test | 2 | |
| ST8783F-1437-075-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1469-084-1 | Swage Tool - Proof Load Tester | 1 | |
| ST8783F-1750-075-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1874-140-1 | Standard Tool-Bearing Retention Proof Test | 1 | |
| ST8783F-1899-140-1 | Standard Tool-Bearing Retention Proof Test | 1 | |
| ST8783F-1912-111-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1938-140-1 | Standard Tool-Bearing Retention Proof Test | 1 | |
| ST8783F-2000-110-1 | BEARING PROOF LOAD TEST TOOL | 1 | |
| ST8783F-2360-134-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-2375-150-1 | PROOF TEST TOOL | 1 | |
| ST8783F-2500-423-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-3000-150-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-812-437-16 | Standard tool bearing retention proof test | 1 | |
| ST8783F2000-110-1 | PROOF TEST TOOL | 1 | |
| ST878D | Standard Tool - Sleeveset for Presetting BACS13AP Flareless Tube Fittings | 9 | |
| ST879A | Hand Presetting Tool - Flareless Tube Fittings MS21922 | 9 | |
| ST879A-1-M | PRESETTING TOOL | 1 | |
| ST879A-3-020 | HAND PRESETTING TOOL FOR | 1 | |
| ST879A-3-020-M | PRESETTING TOOL | 1 | |
| ST879A-3-022 | HAND PRESETTING TOOL FOR | 1 | |
| ST879A-3-022-M | PRESETTING TOOL | 1 | |
| ST879A-3-028 | HAND PRESETTING TOOL FOR | 1 | |
| ST879A-3-028-M | PRESETTING TOOL | 1 | |
| ST879A-3-035 | HAND PRESETTING TOOL FOR | 1 | |
| ST879A-3-035-M | PRESETTING TOOL | 1 | |
| ST879A-3/8" | HAND PRESETTING TOOL | 1 | |
| ST879A-4-020 | HAND PRESETTING TOOL | 1 | |
| ST879A-4-028 | HAND PRESETTING TOOL | 1 | |
| ST879A-4-035 | HAND PRESETTING TOOL | 1 | |
| ST879A-6-028 | HAND PRESETTING TOOL | 1 | |
| ST879A-6-035 | HAND PRESETTING TOOL | 1 | |
| ST879A-D-4 | HAND PRESETTING TOOL | 1 | |
| ST879A-D-6 | HAND PRESETTING TOOL | 2 | |
| ST879A-M-4-028 | Hand Presetting Tool for Flareless Tube Fittings | 1 | |
| ST879A-M-6-035 | Hand Presetting Tool for Flareless Tube Fittings | 1 | |
| ST879A1 | TOOL KIT, HAND PRESETTING, FLARELESS TUBE FITTINGS | 1 | |
| ST879AF | Holding Fixture - Hand Presetting Tools, ST879A | 7 | |
| ST879AF-1 | HOLDING FIXTURE - HAND PRESETTING TOOLS, ST879A | 4 | |
| ST879D | FLARELESS TUBE PRESETTING TOOL | 1 | |
| ST895A-3 | PROBE - RESISTIVITY MEASUREMENT, SURFACE NOTE: OPTIONAL TOOL / LOW USE TOOL - ONLY USE FOR OPTIONAL ST895A-3 TEST METHOD WHICH IS NOT CURRENTLY USED IN 737NG AMM -51-21- 71 - SEE REFERENCED BAC5639 PSD 6-14, PAGES 11 - 13 | 6 | |
| ST9000A1 | Spreader Tool | 1 | |
| ST913K100-25 | Preperation Tool | 3 | |
| ST913K34-24 | Preperation Tool | 2 | |
| ST913K50-09 | Preperation Tool | 2 | |
| ST913K50-12 | Preperation Tool | 1 | |
| ST913K75-25 | Preperation Tool | 3 | |
| ST918A | STANDARD TOOL MANDREL-BEARING-PRESSING BACB10A | 4 | |
| ST918A-1000-1750 | BEARING PRESS TOOL | 4 | |
| ST918A-1000-1875 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-1000-1912 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-1000-2500 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-1180-2064 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-1250-2360 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-1375-2250 | Standard Tool - Mandrel, Bearing Pressing | 1 | |
| ST918A-1375-2562 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1375-2572 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1375-2582 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1375-2856 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1375-3500 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1378-2440 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1500-2812 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1500-3125 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1625-2964 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1750-3339 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1771-2952 | Standard tool mandrel-bearing-pressing bacb10a | 4 | |
| ST918A-190-625 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-190-777 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-2125-3592 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-250-605 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-250-625 | Standard tool mandrel-bearing-pressing bacb10a | 4 | |
| ST918A-250-656 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-250-687 | Standard tool mandrel-bearing-pressing bacb10a | 3 | |
| ST918A-250-689 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-250-750 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-250-901 | Standard tool mandrel-bearing-pressing bacb10a | 4 | |
| ST918A-2500-3937 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-260-687 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-260-688 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-260-689 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-260-750 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-3000-5000 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-312-1250 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-312-687 | BEARING PRESS TOOL | 4 | |
| ST918A-312-750 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-312-781 | Standard tool mandrel-bearing-pressing bacb10a | 3 | |
| ST918A-312-783 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-312-812 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-375-1500 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-375-500 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-375-812 | BEARING PRESS TOOL | 1 | |
| ST918A-375-875 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-375-876 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-375-906 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-437-906 | Standard tool mandrel-bearing-pressing bacb10a | 3 | |
| ST918A-500-1000 | Standard tool mandrel-bearing-pressing bacb10a | 4 | |
| ST918A-500-1065 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-500-1094 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-500-1095 | STANDARD TOOL MANDREL, BEARING, PRESSING BACB10A | 1 | |
| ST918A-500-1687 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-500-1750 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-562-1187 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-562-1188 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-625-1125 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-625-1187 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-625-1687 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-750-1437 | Standard tool mandrel-bearing-pressing bacb10a | 3 | |
| ST918A-750-1625 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-750-1750 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-750-1937 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A750-1930 | MANDREL BEARNG PRESS TOOL | 1 | |
| ST918B-3-500-1687 | Standard tool mandrel bearing pressing BACB10B | 1 | |
| ST918C-250-901 | Standard tool mandrel-bearing pressing bacb10c | 1 | |
| ST918C-312-1250 | Standard tool mandrel-bearing pressing bacb10c | 1 | |
| ST918C-500-1625 | Standard tool mandrel-bearing pressing bacb10c | 1 | |
| ST918C-625-1375 | Standard tool mandrel-bearing pressing bacb10c | 1 | |
| ST918C-625-1937 | Standard tool mandrel-bearing pressing bacb10c | 1 | |
| ST918D-750-1250-620 | Standard tool mandrel-bearing pressing BAC-B10D | 1 | |
| ST920 | MANDREL - NAS PRESS FIT BUSHING INSTALLATION TOOL | 1 | |
| ST920B | INSTALLATION TOOL - PRESS BUSHING | 1 | |
| ST930B | STAKING TOOL - PRESSURE | 1 | |
| ST982LF | Tool - Sealant Removal, BAC5000, PSD 6-184 Approved | 1 | |
| ST982LF-9 | TOOL, SEALANT REMOVAL, BAC5000, PSD6-184 APPROVED | 4 | |
| ST982S | SPREADER TOOL | 1 | |
| ST991A | PRY SEAM TOOL | 5 | |
| ST991NB-1 | Standard tool-spreader，sealant application | 1 | |
| ST9999CL | TOOL - LATCH, FAN COWL_B777-300ER TOOL INITIAL PROVISIONING_[ST9999CL] | 4 | |
| STAB-PX-CHECK-GAUGE | B767 STAB PRESS.GAUGE & HOSE TOOL | 1 | |
| STC327 | .032" PRE-SET TENSION TOOL (7" NOSE) | 1 | |
| STD-1091 | PRESSURE GAUGE TOOLING | 1 | |
| STD-1307 | TOOL – OVER-CENTERING, MLG UPLOCK HOOK (0.500” DIA X 24” METAL ROD, WITH PROTECTIVE RUBBER TUBING) | 1 | |
| STD-574FAS | LOANDING TOOL SPRING | 1 | |
| STK21960 | SPR INSERTION TOOL | 1 | |
| STK21970 | SPR EXTRACTION TOOL | 1 | |
| SVL-220-S | SPRING COMPRESSION TESTER TOOL | 1 | |
| T-0234 | TOOL,DISC SPRING RETAINER | 1 | |
| T-05641 | ARBOR AND GUIDE BUSHING, PRESSURE SWITCH WELD- MACHINING-TOOL | 1 | |
| T-05641-1 | CUTTER, PRESSURE-SWITCH WELD-MACHINING-TOOL 0.930 IN. I.D. T-05641-1 | 1 | |
| T-05641-2 | CUTTER, PRESSURE-SWITCH WELD-MACHINING-TOOL 0.900 IN. I.D. T-05641-2 | 1 | |
| T-05641-3 | PRESSURE SWITCH WELD MACHINING TOOL | 1 | |
| T-05641-4 | PRESSURE SWITCH WELD MACHINING TOOL | 1 | |
| T-05641-5 | PRESSURE SWITCH WELD MACHINING TOOL | 1 | |
| T-16 | RETRIEVING TOOL-SPRING CLAW | 1 | |
| T-24167 | Bearing Pressing Tools | 1 | |
| T-24349 | Bearing Pressing Tools | 1 | |
| T-24350 | BEARING PRESSING TOOL | 1 | |
| T-456417 | Compression Tool | 1 | |
| T-457461 | Compression Tool | 1 | |
| T-457464 | Compression Tool | 1 | |
| T-457471 | Compression Tool | 1 | |
| T-457478 | Compression Tool | 1 | |
| T-474459 | TOOL, CHILL-BLOCK-AND- PROTECTOR | 1 | |
| T-474489-1-10 | TOOL, CHILL BLOCK AND PROTECTOR | 1 | |
| T-474530-1-10 | TOOL, CHILL-BLOCK-AND- PROTECTOR | 1 | |
| T-474566-1-10 | TOOL, CHILL-BLOCK-AND- PROTECTOR | 1 | |
| T-475069-1-10 | TOOL, CHILL-BLOCK-AND- PROTECTOR | 1 | |
| T-475070-1-10 | TOOL, CHILL-BLOCK-AND- PROTECTOR | 1 | |
| T-475976-1-10 | CHILL BLOCK AND PROTECTOR TOOL | 1 | |
| T-500 | SURFACE FINISH INSPECTION TOOLS (T-500 PROFILOMETER) | 1 | |
| T-897465-51-2 | PRESSURE SWITCH WELD MACHINING TOOL | 1 | |
| T-897465-51-7 | TOOL, PRESSURE SWITCH WELD MACHINING | 1 | |
| T-897465-51-7K | TOOL, PRESSURE SWITCH WELD- MACHINING | 1 | |
| T-897465-7 | TOOL PRESS SWITCH WELD MACHINING | 1 | |
| T007-401 | TOOL, SPRING MOUNTING | 1 | |
| T0206 | REGULATED PRESSURE TOOL | 1 | |
| T05641 | PRESSURE SWITCH WELD MACHINING TOOL | 1 | |
| T05641-1 | PRESSURE SWITCH WELD MACHINING TOOL | 1 | |
| T05641-2 | PRESSURE SWITCH WELD MACHINING TOOL | 1 | |
| T05641-3 | PRESSURE SWITCH WELD MACHINING TOOL | 1 | |
| T05641-4 | PRESSURE SWITCH WELD MACHINING TOOL | 1 | |
| T05641-5 | PRESSURE SWITCH WELD MACHINING TOOL | 1 | |
| T05641-7 | CUTTER, 1.220 DIA, PRESSURE SWITCH WELD-MACHINING TOOL | 1 | |
| T05641-8 | CUTTER, 1.190 DIA, PRESSURE SWITCH WELD-MACHINING TOOL | 1 | |
| T05641-9 | CUTTER, 1.160 DIA, PRESSURE SWITCH WELD-MACHINING TOOL | 1 | |
| T101599 | PRESSING TOOL | 1 | |
| T115 | SPRING ASSEMBLY TOOL | 2 | |
| T11995 | SPRING COMP TOOL | 1 | |
| T185 | SAVAPRESS PRESSING TOOL | 5 | |
| T190-488 | Press Tool | 1 | |
| T190-488 PM | PRESS TOOL | 1 | |
| T1987 | PROPELLER OVER SERVICING TOOL | 1 | |
| T22284050LS1 | LOCATING SPRING TOOL SET | 1 | |
| T2875-5 | SPRING COMPRESSING TOOL | 1 | |
| T3014706 | SPRING WINDUP TOOL | 1 | |
| T3016082 | AIRSPEED MEMORY INDEX POINTER TRACK PREPARATION TOOL | 1 | |
| T3016461 | SLIPRING ALIGN. TOOL | 1 | |
| T3026080 | SPRING WIND UP TOOL | 1 | |
| T322068 | SLIRPRING ALIGNMENT TOOL | 1 | |
| T324649 | SPRING WINDUP TOOL | 1 | |
| T3608-28 | Compression Tool | 1 | |
| T3695-11 | COMPRESSION TOOL | 1 | |
| T431456 | TOOL SPRING COMPRESSION | 1 | |
| T449014 | SPRING COMPRESSION TOOL | 1 | |
| T449539 | COMPRESSION TOOL (EATON AEROSPACE) | 1 | |
| T456417 | COMPRESSION TOOL | 1 | |
| T457461 | COMPRESSION TOOL | 1 | |
| T457464 | TOOL COMPRESSION | 1 | |
| T457471 | COMPRESSION TOOL | 1 | |
| T457478 | COMPRESSION TOOL | 1 | |
| T46437 | A350 PRESSURE SENSOR TOOL | 6 | |
| T48835 | COMPRESSION TOOL (FOR THE COMPRESSION OF THE PISTON SPRING) | 1 | |
| T5734-203 | TOOL, COMPRESSOR SUPPORT | 1 | |
| T7.92.9940.740.000.00 | NLG SPRING REMOVAL TOOL | 1 | |
| T786532 | LVDT PROBE ADJUSTMENT TOOL | 1 | |
| T869 | SPANER OPRATION TOOL | 1 | |
| T897465-51-2 | PRESSURE SWITCH WELD MACHINING TOOL | 1 | |
| T897465-51-5 | PRESSURE GAGE WELD MACHINING TOOL | 1 | |
| T897465-51-7 | TOOL, PRESSURE SWITCH WELD MACHINE | 1 | |
| T99A38-606 | PRIMARY EJECTOR TOOL | 1 | |
| TA04999 | Arbor Press and Crimping Tool | 1 | |
| TAM176153 | PRESS Test tools | 1 | |
| TB3003G001 | Measurement Tool - APS3200 - Pratt & Whitney Aeropower / Pratt & Whitney Canada | 1 | |
| TB3012G002 | Tightening Tool (Fixture) - APS3200 - Pratt & Whitney Aeropower / Pratt & Whitney Canada | 1 | |
| TB3013G001 | Measurement Tool - APS3200 - Pratt & Whitney Aeropower / Pratt & Whitney Canada | 1 | |
| TB3013G002 | LOAD COMPRESSOR ASSEMBLY MEASUREMENT TOOL | 1 | |
| TB3014G001 | Measurement Tool - APS3200 - Pratt & Whitney Aeropower / Pratt & Whitney Canada | 1 | |
| TB3017G002 | Tightening Tool - APS3200 - Pratt & Whitney Aeropower / Pratt & Whitney Canada | 1 | |
| TB3019G004 | PROTECTION TOOL | 1 | |
| TB3019G005 | PROTECTION TOOL | 1 | |
| TB3021G001 | Tightening Tool - APS3200 - Pratt & Whitney Aeropower / Pratt & Whitney Canada | 1 | |
| TB3026G002 | Measurement Tool - APS3200 - Pratt & Whitney Aeropower / Pratt & Whitney Canada | 1 | |
| TB3039G002 | Bearing Fitting Tool - APS3200 - Pratt & Whitney Aeropower / Pratt & Whitney Canada | 1 | |
| TB3043G002 | Borescope Guide Tool - APS3200 - Pratt & Whitney Aeropower / Pratt & Whitney Canada | 12 | |
| TB3063G001 | Rotor Hoisting Tool - APS3200 - Pratt & Whitney Aeropower / Pratt & Whitney Canada | 1 | |
| TB9069G001 | Gearbox Draining Tool - APS3200 - Pratt & Whitney Aeropower / Pratt & Whitney Canada | 10 | |
| TB9076G001 | Alignment Tool - Oil Jet - APS3200 - Pratt & Whitney Aeropower / Pratt & Whitney Canada | 1 | |
| TC3304G002 | SPRAYING TOOL | 1 | |
| TD3727-001 | PRESSING TOOL | 1 | |
| TD3727-002 | PRESSING TOOL | 1 | |
| TD3727-003 | PRESSING TOOL | 1 | |
| TE001U2158-4 | PROOF TOOL | 2 | |
| TE20-00-08-2GT | WIGGLE TOOL, PRELOAD INDICATING WASHER | 1 | |
| TE65B84683 | TEST TOOL - PRESSURE VESSEL CARTRIDGE, TYPE A DOOR | 4 | |
| TECO6-141-05 | CONTROL TOOL AIR PRESSURE SYSTEM | 1 | |
| TER87976 | Lockout Tool, Flap (Prototype) | 1 | |
| TF-10963 | SHUT-OFF VALVE SPRING COMPRESSION TOOL | 1 | |
| TF50B27503-2 | TOOL, PROTRACTOR | 1 | |
| TF50B55301 | SPRING LOADED PANEL R/I TOOL | 1 | |
| TF50B55301A | Spring Loaded Fairing Tool | 2 | |
| TL-5594 | PROP BLADE TOOLS | 2 | |
| TL82 | PUNTAS DE PRUEBA (FLUKE) (CONTROL TOOL) | 2 | |
| TM0807G001 | GENERATING TOOL HYDRAULIC PRESSURE | 3 | |
| TM6628G001 | PRESS TOOL | 1 | |
| TM6638G001 | PRESS TOOL | 1 | |
| TM7038753-001 | PREPROCESSOR TOOL | 3 | |
| TMA1013 | Bearing Press Tool | 1 | |
| TMA2199 | Bearing Press Tool | 1 | |
| TMA2200 | Bearing Press Tool | 1 | |
| TMA2241 | Bearing/Spacer Press Tool | 1 | |
| TMH AM21-00-00 | PGB & PROPELLER ACTUATOR PROTECTION TOOL | 1 | |
| TMHBS02-00-00 | PROPELLER & ENGINE R/I TOOL | 3 | |
| TMY 20-27-002 | PRESSURE GREASING TOOL KIT | 1 | |
| TMY 20-27-003 | PRESSURE GREASING TOOL KIT | 1 | |
| TMY 20-27-004 | PRESSURE GREASING TOOL KIT | 1 | |
| TMY20-27-005-1 | PRESSURE GREASING TOOL KIT | 1 | |
| TMY20-27-601 | TOOL SET FOR PRESSURE GREASING OF FLIGHT CONTROL LINKAGE BEARINGS | 1 | |
| TMY20-28-503-1 | TOOL FUEL PRESSURE | 2 | |
| TMY20-28-5031 | TOOL FUEL PRESSURE | 2 | |
| TMY20-32-351 | PRESS CHECKING TOOL | 1 | |
| TN313227 | TOOL, SAFETY NET PRESSURIZATION | 3 | |
| TN330432 | ALIGNMENT TOOL, PITOT STATIC PROBE, MODEL 60 | 1 | |
| TN460080 | LASER PITOT PROBE CHECK TOOL | 4 | |
| TN618746 | PITOT PROBE CHECK TOOL (RVSM) | 1 | |
| TN623626 | TOOL, PITOT, PROBE CHECK | 2 | |
| TN627157 | PROBE BARREL TOOL | 1 | |
| TO4848 | GO-NO-GO TOOL (PRE S.B. A321 005-25-16) | 1 | |
| TPG | TYRE PRESSURE GAUGE TOOL | 1 | |
| TPMS6 | TPMS PROGRAMMING SENSOR TOOL | 1 | |
| TQN527 | SPRING RATE ADJ TOOL | 1 | |
| TQN566 | SPRING RATE ADJ. TOOL | 1 | |
| TS-1275-4-1000 | TOOL - SEALANT REMOVAL, BAC5000, PSD 6-184 APPROVED | 1 | |
| TS1275-4 | Tool - Sealant Removal, BAC5000, PSD 6-184 Approved | 4 | |
| TSFFT1U2820-19 | PRESSURE TEST TOOL | 2 | |
| TTL-CABLESIZINGTOOL | CABLE SIZING TOOL (HTTPS://WWW.TTLCAL.COM/PRODUCT/CABLE-SIZING-TOOL/ ) | 1 | |
| TTL108D0001-1 | SPREADER BAR TOOL | 1 | |
| TTL108D0001-3 | SPREADER BAR TOOL | 1 | |
| TZ-2255 | TOOL INSERT PRESS | 4 | |
| U06A610000A | PROPELLER TOOL SET- 5 BLADE | 1 | |
| U21829 | TOOL NLG DRAG STAY LOCKSPRING R/I | 11 | |
| U21829-1 | TOOL NLG DRAG STAY LOCKSPRING R/I | 1 | |
| U21966 | NLG Lock Spring Tens. Tool | 8 | |
| U219663 | SPRING TENSION TOOL NLG | 1 | |
| U21992 | COMPRESSION TOOL | 1 | |
| U21992000 | COMPRESSION TOOL | 2 | |
| U27966 | LOCK SPRING TENSION TOOL | 1 | |
| UDT3 | Bench Press Style Open Fram Crimp Tool for Use with X DIES | 2 | |
| UDT5 | Bench Press Style Open Frame Crimp Tool For "Y" Dies | 1 | |
| UPT35DP | DRK PRP TELECSOPIC PICKUP TOOL | 1 | |
| UPT35PB | PRL BLU TELESCOPIC PICKUP TOOL | 1 | |
| UT1067 | TOOL - TURN, TIGHT ENGINE - HIGH PRESSURE SYSTEM | 1 | |
| UT1514 | SMART CARD (INSIDE PROGRAMMER) TOOL | 1 | |
| UT1515 | DATA ENTRY PROGRAMMER TOOL | 1 | |
| UT1516 | DATA ENTRY PLUG PROG UNIT TOOL | 1 | |
| UT1517 | A330 DATA ENTRY PLUG PROG UNIT TOOL | 1 | |
| UT1539 | SMART CARD (INSIDE PROGRAMMER) TOOL | 1 | |
| UT1840 | TOOL: PROGRAMMER-DAT | 3 | |
| UT977 | TOOL - TURN, HIGH PRESSURE SYSTEM | 2 | |
| UTIVPTS | VOUCHER PROGRAM TOOL SET | 1 | |
| UVU0631311 | SPRNG LCK DISCONNECT TOOL-FORD | 1 | |
| UZA022410000000 | BY-PASS VALVE COMPRESSION TOOL | 1 | |
| UZA030900000000 | TOOL REPRESENTING 100% CLOGGED FILTER ELEMENT | 1 | |
| Upgrade of C78009-39 to C78009-88 | Remove/install tool-primary exhaust assys | 1 | |
| Upgrade of C78009-72 to C78009-88 | Remove/install tool-primary exhaust assys | 1 | |
| V21805 | COMPRESSION TOOL TO REMOVE THE SPRING OF THE VALVE | 1 | |
| V25SH2022 | PRESSURE TEST TOOL | 1 | |
| V2K | PROPELLER BALANCING TOOL | 2 | |
| V2K+ | PROPELLER BALANCING TOOL | 2 | |
| V2KATR | PROPELLER BALANCER TOOL VALISE ÉQUILIBRAGE HÉLICE « CHADWICK » | 9 | |
| VFT300A1T501 | TOOL FOR SPRING ASSEMBLY | 1 | |
| VLHK-101 | VISU-LOK-RATCHET HAND TOOL KIT FLUSH AND PROTRUDING | 1 | |
| VLHK-102 | VISU-LOK-RATCHET HAND TOOL KIT FLUSH AND PROTRUDING | 2 | |
| VR-L11-0010-002-2 | PRESS TOOL | 1 | |
| W003056A | 450 PCS UNIVERSAL PROFESSIONAL MECHANICS TOOL SET WITH HEAVY DUTY CASE BOX | 1 | |
| W1151 | PRESSING,TOOL | 1 | |
| W1166 | PRESSING,TOOL | 1 | |
| WA403 | World Wide Products A403 Aircraft Brake Rivet Tool | 1 | |
| WAS2330-0660 | PROFESSIONAL FLARING TOOL | 1 | |
| WB3505 | ENGINE MASTER PROBE DETECTOR TOOL | 1 | |
| WSTQ400384 | PROPELLER BLADE COMPRESSION TOOL | 1 | |
| WT-001978-7 | CHILL BLOCK AND PROTECTOR TOOL | 1 | |
| WT-00198-1 | TOOL, CHILL-BLOCK- AND-PROTECTOR | 1 | |
| WT-00198-10 | TOOL, CHILL BLOCK AND PROTECTOR | 1 | |
| WT-00198-12 | TOOL, CHILL-BLOCK-AND-PROTECTOR TOOL | 1 | |
| WT-00198-16 | TOOL, CHILL BLOCK AND PROTECTOR | 1 | |
| WT-00198-4 | TOOL, CHILL BLOCK AND PROTECTOR | 1 | |
| WT-00198-7 | CHILL BLOCK-AND- PROTECTOR-TOOL | 1 | |
| WT-00834 | PRESSURE SWITCH WELD MACHINING TOOL | 1 | |
| WT-01159 | TOOL, SPRING RING | 1 | |
| WT00198 | CHILL BLOCK AND PROTECTOR TOOL | 1 | |
| WT00198-11 | CHILL BLOCK AND PROTECTOR TOOL | 1 | |
| WT00198-12 | CHILL BLOCK AND PROTECTOR TOOL | 1 | |
| WT00198-16 | CHILL BLOCK AND PROTECTOR TOOL | 1 | |
| WT00198-6 | CHILL BLOCK AND PROTECTOR TOOL | 1 | |
| WT00834 | PRESSURE SWITCH WELD MACHINING TOOL | 1 | |
| WTGC96-10000 | W ATERDTC WATER DETECTION TOOL - PRECIWAT | 1 | |
| X52-019 | DECOMPRES SIMU TOOL | 1 | |
| XL4TM61105FG | ENGINE 3D VIDEO PROBE OPTICAL TIP - TOOL | 5 | |
| XL4TM61105SG | ENGINE 3D VIDEO PROBE OPTICAL TIP - TOOL | 4 | |
| XLG3T61120FG | ENGINE VIDEO PROBE OPTICAL TIP - TOOL | 3 | |
| XLG3T61120SG | ENGINE VIDEO PROBE OPTICAL TIP - TOOL | 3 | |
| XLG3T6150SF | ENGINE VIDEO PROBE OPTICAL TIP - TOOL | 1 | |
| YA4660 | CAMSHAFT SPROCKET HOLDING TOOL | 1 | |
| YA501113 | WIN GUARD SEPRTR TOOL | 1 | |
| YA837A | FLEX SPRING 4 CLAW PICK UP TOOL | 3 | |
| Z080-030-110-60 | RIGID PROBE TOOL | 1 | |
| c47578-2 | NLG THREAD PROTECTOR TOOL | 4 | |
| f80115-13 | THREAD PROTECTOR AND ALIGNMENT TOOLS – MAIN GEAR | 8 | |
| lC5906 | TOOL SET, INSPECTION-LOW PRESSURE TURBINE ROTOR BLADES | 1 | |
| lC8052 | TOOL STARTING & STRAIGHTENING RTNR COMPR. RTR BLADE, ST | 1 | |
| 98A21203500000 | TOOL,USED FOR PRESSURIZING APU BLEED AIR | 3 | |
| 98A27103500000 | PROTECTION TOOL,FTU,USED TO AVOID CLEARA | 7 | |
| 98A27103500001 | PROTECTION TOOL,FTU,USED TO AVOID CLEARA | 7 | |
| 98F34103003000 | FLUSHING TOOL,IS USED TO FLUSH PITOT PRO | 28 | |
| CP16101-20SSD | CAPRI TOOLS 1/4 IN. DRIVE 12-POINT SHALLOW AND DEEP SOCKET SET, SAE, 3/16 TO 9/16 IN, SAE, 20-PIECE | 1 | |
| F46753-1000 | PROTECTIVE TOOL,USED TO PROTECT THE WHEE | 10 | |
| RSE1120 | ALIGNMENT,TOOL,USED TO LOCATE THE PRECOO | 3 | |
| RSE1136 | TENSION TOOL,USED TO PRELOAD THE BLOCKER | 4 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
