| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 0U300698 | POSITION TOOL | 1 | |
| 2309-S015-401 | POSITION TOOL | 2 | |
| 2309S015401 | POSITION TOOL | 2 | |
| 444-65042-000 | POSITION TOOL | 1 | |
| 444-65157-000 | POSITION TOOL | 1 | |
| 444-65231-000 | POSITION TOOL | 1 | |
| 69701-RSK1000695 | POSITION TOOL | 1 | |
| 98S57205018000 | POSITION TOOL | 1 | |
| DRT68973 | POSITION TOOL | 12 | |
| F117-501 | Position Tool | 1 | |
| F117-502 | Position Tool | 1 | |
| MTAX04D52880165 | POSITION TOOL | 1 | |
| RB T103287-101 | Position Tool | 2 | |
| RB T103287-111 | Position Tool | 2 | |
| T103287-101 | POSITION TOOL | 1 | |
| T103287-111 | POSITION TOOL | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 98A21001500000 | TOOL INSTALLATION POSITIONING TOOL-R (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27603000001 | CHECK SPOILER POSITION CHECK TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D53103007000 | POSITION POSITIONER TOOL-LOWER SHELL (MX (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F28203000000 | FUEL PIPE POSITION TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L53809018000 | POSITIONING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L53809018001 | POSITIONING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L53809019000 | POSITIONING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AGE17401 | BRAKE POSITION SENSOR UNIT (BPSU) TEST TOOL (HAMILTON SUNDSTRAND) (MODEL # 99167-AGE17401) (CALIBRATION) | 1 | |
| (CALIB) M22520-5-01 | CRIMPING TOOL - POSITIONER (CALIBRATION) | 1 | |
| 010-0041 | CONTACH POSITIONER,TERMINAL CRIMPING TOOL | 1 | |
| 0229-039-00 | POSITIONER FOR 15500-20 CRIMPING TOOL | 1 | |
| 03056TA1 | POSITIONING GLAND SEAL TOOL | 1 | |
| 0S22281 | POSITIONING TOOL | 1 | |
| 0S22455 | POSITIONING TOOL | 1 | |
| 0S23001 | POSITIONING TOOL | 1 | |
| 0U 145271 | POSITIONING TOOL | 1 | |
| 0U145036 | POSITION TOOLING | 1 | |
| 0U145271 | POSITIONING TOOL | 1 | |
| 0U148961 | POSITIONING TOOL | 1 | |
| 0U190834 | TOOL-ZERO POSITIONING,THS ACTUATOR | 22 | |
| 0U191230 | A340 THSA POSITION TRANSDUCER PACK CONNECTION GEAR ADJUSTMENT TOOL | 1 | |
| 0U300123 | POSITIONNING TOOL | 1 | |
| 0U300149 | POSITIONNING TOOL | 1 | |
| 0U300161 | SPHERICAL BEARING POSITIONING TOOL | 1 | |
| 0U300162 | POSITIONING TOOL | 1 | |
| 0U300163 | POSITIONING TOOL | 1 | |
| 0U300227 | POSITIONING TOOL | 1 | |
| 0U300300 | POSITIONING TOOL | 1 | |
| 0U300436 | POSITIONING TOOL | 1 | |
| 0U300438 | POSITIONING AND HOLDING TOOL | 1 | |
| 0U300592 | POSITIONING AND TIGHTENING TOOL | 1 | |
| 0U300607 | POSITIONING TOOL | 1 | |
| 0U300608 | POSITIONING TOOL | 1 | |
| 0U300609 | POSITIONING TOOL | 1 | |
| 0U300654 | POSITIONING TOOL | 1 | |
| 0U300919 | BEARING POSITIONNING TOOL | 1 | |
| 0U300920 | BEARING POSITIONNING TOOL | 1 | |
| 0U301203 | POSITIONING TOOL | 1 | |
| 0U301204 | POSITIONING TOOL | 1 | |
| 0U301346 | POSITIONING TOOL | 1 | |
| 1-601966-0 | POSITIONER TOOL (ASI) | 1 | |
| 100-0074-2 | POSITIONING TOOL | 1 | |
| 109-0110-01-109E023A | TOOL ASSEMBLY, SWASHPLATE DUPLEX BEARING POSITIONING | 1 | |
| 109-3101-71-1 | POSITIONING TOOL, TR HUB COVER | 1 | |
| 109-3101-71-1 | POSITIONING TOOL, TR HUB COVER GF-95-00 | 1 | |
| 109011001-109E023A | TOOL ASSY, SWASHPLATE DUPLEX BEARING POSITIONING | 1 | |
| 109011105101A564B | POSITIONING/ BONDING TOOL, SHOULDERS PART | 1 | |
| 109011105101E561A | POSITIONING/ BONDING TOOL, BRACKET INSTALLER PART | 1 | |
| 109011203103A561B | POSITIONING/ BONDING TOOL, METAL WASHERS AND FIBERGLASS SHIMS BONDING PART | 1 | |
| 109011203103A561C | POSITIONING/ BONDING TOOL, METAL PLATES AND FIBERGLASS SHIMS BONDING PART | 1 | |
| 109G6220G03-101 | TOOL ASSY, SWASHPLATE DUPLEX BEARING POSITIONING | 1 | |
| 11-8465 | ROTOR HOLDING TOOL IN POSITION | 2 | |
| 11210 | CRIMPING TOOL WITHOUT POSITIONER | 4 | |
| 139W00-114-00 | INNER BEAM POSITIONING TOOL KIT | 1 | |
| 139W00-117-00 | INNER BEAM POSITIONING TOOLKIT, ASSEMBLIES | 1 | |
| 16F-14C0204201 | POSITIONING TOOL | 1 | |
| 16F-14C0205205 | POSITIONING TOOL | 1 | |
| 16F-14C0211207 | POSITIONING TOOL | 1 | |
| 16F-14C0411207 | BEAM POSITIONING TOOL | 1 | |
| 16F2-14C0204201 | POSITIONING TOOL | 1 | |
| 16F2-14C0205205 | POSITIONING TOOL | 1 | |
| 16F2-14C0211207 | POSITIONING TOOL | 1 | |
| 2-8080-20-AZL | EXTERNAL RACEWAY POSITIONING TOOL | 1 | |
| 2-8080-58-AZL | INTERNAL RACEWAY POSITIONING TOOL | 1 | |
| 212-93043-0001 | Positioning Tool, Pedals Assembly | 1 | |
| 22520-2-02 | POSITIONER, CRIMPING TOOL (DMC) | 1 | |
| 22520-5-01 | CRIMPING TOOL - POSITIONER | 1 | |
| 2309-S015-401 | TOOL, POSITIONING -TRAILING ARM SHIM | 2 | |
| 2309‐S015‐401 | TOOL,POSITIONING‐TRAILING ARM SHIM | 2 | |
| 246700-78 | TOOL MLG POSITIONING | 1 | |
| 27136290004-36 | POSITIONING TOOL | 1 | |
| 2713629004-36 | POSITIONING TOOL, PLATE | 1 | |
| 287549-1 | POSITIONNING TOOL BUTTERFLY PLATE | 1 | |
| 291357-1 | TOOL, POSITIONING BUTTERFLY | 1 | |
| 291357-2 | BUTTERFLY POSITIONING TOOL | 1 | |
| 291357-3 | BUTTERFLY POSITIONING TOOL | 1 | |
| 2C14280G01 | TOOL - FIXTURE POSITION FUEL NOZZLE | 2 | |
| 2C14778G01 | TOOL SET, POSITION LUBE & SCAVENGE TUBE TRF | 2 | |
| 2C6451G02 | VSV POSITION TRANSMITTER SET (TOOL IS USED TO INDI | 1 | |
| 2C6451G03 | VSV POSITION TRANSMITTER SET (TOOL IS USED TO INDI | 1 | |
| 2SJJ04035-02 | POSITIONG TOOL | 1 | |
| 2SJJ04314-01 | POSITIONING TOOL | 1 | |
| 31-5268 | POSITION-LIGHT ALINGMENT TOOL | 1 | |
| 32001-R815505 | TAP POSITION TOOL | 1 | |
| 3403219-1 | POSITIONING TOOL PROPELLER | 1 | |
| 3A5330G00131 | POSITIONNING / DRILLING TOOL-MGB UP DECK | 1 | |
| 3G5350A00133A005A | POSITIONING AND DRILLING TOOL KIT | 1 | |
| 3G6200G00331 | POSITIONING TOOL, MR HUB INSTL. | 1 | |
| 4135AS1017 | SERVO ACTUATOR POSITIONING TOOL | 2 | |
| 4135AS1018 | COLLECTIVE LEVER POSITIONING TOOL | 2 | |
| 74690 | POSITIONING TOOL | 2 | |
| 78874 | POSITIONNING TOOL | 1 | |
| 78886 | POSITIONNING TOOL | 1 | |
| 78887 | POSITIONNING TOOL | 1 | |
| 415110 | POSITIONING TOOL | 1 | |
| 420688-4 | POSITIONING TOOL | 1 | |
| 444-65042-000 | POSITIONING TOOL | 1 | |
| 615718 | POSITIONER TOOL | 1 | |
| 640040 | CRIMP POSITIONER TOOL | 3 | |
| 83760341 | POSITIONING AND CLAMPING TOOL | 1 | |
| 83760381 | POSITIONING AND CLAMPING TOOL | 1 | |
| 460006121 | POSITIONING TOOL | 1 | |
| 465724079 | TOOL POSITIONING | 1 | |
| 4611624500 | POSITIONING TOOL | 1 | |
| 4611651500 | POSITIONING TOOL | 1 | |
| 4618012504 | HOUSING POSITIONNING TOOL | 1 | |
| 523095T01R03 | KIT FRAME FORK POSITIONING TOOL | 1 | |
| 57092A0000-01 | POSITIONNING TOOL | 1 | |
| 615708/TP529 | TOOL W/ POSITIONER (5120-00-251-3990) | 1 | |
| 62100-3300 | 48 Position Shroud Removal Tool | 1 | |
| 62800-2510144706-20 | POSITIONING TOOL BOX | 1 | |
| 62900S54312200000 | FITTING POSITION TOOL | 1 | |
| 63811-8675 | TOOL POSITIONING FIXTURE | 1 | |
| 65226-101 | TOOL, ASPIRATOR POSITIONING | 1 | |
| 65304-RSK1000695-0000 | POSITIONING TOOL | 1 | |
| 66-0410 | STATIC DISCH TEST PROBE(POSITION TOOLING) | 11 | |
| 68920-652-1 | MECHANISM POSITIONING TOOL | 1 | |
| 69002-R815505 | WIRE LEAD BLOCK POSITIONING TOOL | 1 | |
| 69002-R815505-0000 | WIRE LEAD BLOCK POSITIONING TOOL | 1 | |
| 69701-RSK1000695 | POSITIONING TOOL | 1 | |
| 6F6210A00131A189A | POSITIONING TOOL | 1 | |
| 6F6210A05431A563A | TRIM TAB POSITIONING TOOL | 1 | |
| 75-32-14 | Positioning Tool | 1 | |
| 75701-RSK1000695-0000 | POSITIONING TOOL | 1 | |
| 79983/4 | POSITIONNING TOOL | 1 | |
| 81101FE171 | POSITIONING TOOL | 1 | |
| 81101FE197 | POSITIONING TOOL | 1 | |
| 81401FE380248 | POSITIONING TOOL | 1 | |
| 81403FE38070500 | SWITCHES POSITION CONTROL TOOL | 1 | |
| 81403FE38071000 | SWITCHES POSITION CONTROL TOOL | 1 | |
| 856A 2392G01 | TOOL SET POSITION GAGE | 1 | |
| 856A 2397G01 | TOOL CHECKING AXIAL POSITION | 4 | |
| 856A 2410G01 | TOOL SET POSITION GAGE STAGE 1 LPT SHROUD | 1 | |
| 856A1147G01 | TOOL RADIAL POSITION | 1 | |
| 856A2392G01 | TOOL SET POSITION GAGE | 1 | |
| 856A2397G01 | TOOLCHECKING, AXIAL POSITION - CENTER VENT TUBESUPPÖRTS (CHECKING TOOL) | 4 | |
| 856A2664G01 | VBV CLOSE POSITION SETTING TOOL | 24 | |
| 856A3472 | TOOL, CHECKING, AXIAL POSITION - CENTER VENT TUBE SUPPORTS | 1 | |
| 856A3472 G01 | Checking Tool Axial Position CVT Support | 10 | |
| 856A3472G01 | TOOL, CHECKING, AXIAL POSITION - CENTER VENT TUBE SUPPORTS | 10 | |
| 856A3472G01 | TOOL, CHECKING, AXIAL POSITION -CENTER VENT T. SU | 10 | |
| 856A3492G09 | LOCKING TOOL ZERO POSITION | 1 | |
| 856A3537 | TOOL CHECKING POSITION AGB | 1 | |
| 856A3537G01 | TOOL CHECK AGB POSITION | 2 | |
| 856A3537G02 | CHECKING TOOL AGB POSITION | 7 | |
| 856A5944 | TOOL GAGE - POSITION LPT SHAFT | 1 | |
| 856A5944G01 | POSITION LPT SHAFT TOOL GAGE | 2 | |
| 856A5944G03 | POSITION LPT SHAFT TOOL GAGE | 2 | |
| 856A5945G01 | POSITION LPT SHAFT TOOL GAGE MASTER | 5 | |
| 856A5945G04 | POSITION LPT SHAFT TOOL GAGE MASTER | 4 | |
| 86-11S | CRIMPING TOOL, POSITIONER | 3 | |
| 86-1S | CRIMPING TOOL, POSITIONER | 5 | |
| 86-20 | TOOL POSITIONER | 8 | |
| 86-6 | TOOL POSITIONER | 8 | |
| 86-7 | CRIMP TOOL POSITIONER 20 GAUGE | 3 | |
| 881295400 | ENGINE FREE WHEEL MAGNETIC SEAL POSITIONING TOOL | 1 | |
| 88500D53132010000 | A320CEO/FNO RADAR POSITIONING TOOLING | 2 | |
| 895-3101-34-101 | BEARING POSITIONING TOOL | 1 | |
| 928A689-1 | FLINGER POSITIONING TOOL | 1 | |
| 928A691-1 | FLINGER POSITIONING TOOL | 1 | |
| 928A691-2 | FLINGER POSITIONING TOOL | 1 | |
| 98A21001500000 | INSTALLATION POSITIONING TOOL-REFRIGERATION UNIT PACK | 2 | |
| 98A36103500000 | DRILLING AND POSITIONING TOOL | 2 | |
| 98A36103501000 | POSITIONING TOOL-FAN AIR VALVE | 1 | |
| 98A36103501000-MAEL | POSITIONING TOOL | 1 | |
| 98A53103003000 | INSTALLATION POSITIONING TOOL-COCKPIT DOOR | 1 | |
| 98A53203503000 | TOOL-POSITIONING | 1 | |
| 98A53603006000 | POSITIONING TOOL-RADOME FITTINGG | 1 | |
| 98A54003110042 | CONTROL-POSITION TOOL-FWD,AFT SUPPORT ASSY | 1 | |
| 98A54003110044 | CONTROL-POSITION TOOL-BEAM ASSY,LH | 1 | |
| 98A54003110045 | CONTROL-POSITION TOOL-BEAM ASSY,RH | 1 | |
| 98A54003110046 | CONTROL-POSITION TOOL-FWD,AFT SUPPORT ASSY | 1 | |
| 98A54003110049 | CONTROL-POSITION TOOL-BEAM ASSY,RH | 1 | |
| 98A54003110050 | CONTROL-POSITION TOOL-FWD,AFT SUPPORT ASSY | 1 | |
| 98A54003110052 | CONTROL-POSITION TOOL-BEAM ASSY,LH | 1 | |
| 98A54003110053 | CONTROL-POSITION TOOL-BEAM ASSY, RH | 1 | |
| 98A54003110054 | CONTROL-POSITION TOOL-FWD,AFT SUPPORT ASSY | 1 | |
| 98A54003110056 | CONTROL-POSITION TOOL-BEAM ASSY,LH | 1 | |
| 98A54003110057 | CONTROL-POSITION TOOL-BEAM ASSY,RH | 1 | |
| 98A54003110060 | CONTROL-POSITION TOOL - BEAM ASSY, LH | 1 | |
| 98A54003110061 | CONTROL-POSITION TOOL - BEAM ASSY, RH | 1 | |
| 98A54003110062 | CONTROL-POSITION TOOL - FWD, AFT SUPPORT ASSY | 1 | |
| 98A54003110064 | CONTROL-POSITION TOOL - BEAM ASSY, LH | 1 | |
| 98A54003110065 | CONTROL-POSITION TOOL - BEAM ASSY, RH | 1 | |
| 98A79003000000 | LOCKING TOOL-FLAP SLAT LEVER,INT. POSITION | 10 | |
| 98D27303010000 | DRILLING TOOL-0 POSITION INDEX | 1 | |
| 98D27407517000 | TOOL-ZERO POSITIONING, THS ACTUATOR | 21 | |
| 98D27603000001 | SPOILER POSITION CHECK TOOL | 20 | |
| 98D2760300001 | SPOILER POSITION CHECK TOOL | 2 | |
| 98D27604004000 | LOCKING TOOL-FLAP SLAT LEVER,INT. POSITION | 8 | |
| 98D2780 3000 000 | LOCKING TOOL - FLAP SLAT LEVER, INT. POSITION | 41 | |
| 98D27803000000 | LOCKING TOOL-FLAP SLAT LEVER,INT. POSITION | 41 | |
| 98D27803000001 | LOCKING TOOL-FLAP SLAT INTERMEDIATE POSITION | 5 | |
| 98D27803000001 | LOCKING TOOL-FLAP SLAT LEVER,INT. POSITION | 5 | |
| 98D27803000002 | LOCKING TOOL-FLAP SLAT LEVER,INT. POSITION | 2 | |
| 98D27803500001 | LOCKING TOOL-FLAP SLAT LEVER,INT. POSITION | 35 | |
| 98D27803500002 | LOCKING TOOL ZERO POSITION | 6 | |
| 98D52109001000 | POSITIONING TOOL | 8 | |
| 98D53103007000 | POSITIONER TOOL-LOWER SHELL (MXA 296) | 1 | |
| 98D53203500000 | TOOL SECTION POSITION | 1 | |
| 98D53603001000 | POSITIONING TOOL RADOME FITTING | 1 | |
| 98F27200300000 | PIN ACCUM.POSITION TOOL | 1 | |
| 98F27201007000 | RUDDER NEUTRAL POSITION SETTING TOOL | 6 | |
| 98F27808205001 | GAUGE - AERO POSITION SLATS. TOOLING | 17 | |
| 98F28203000000 | POSITION TOOL FUEL PIPE | 3 | |
| 98F32103000000 | POSITIONING TOOL | 1 | |
| 98F32303000000 | POSITIONING TOOL-MLG UPLOCK | 8 | |
| 98F32303900000 | POSITIONNING TOOL MLG UPLOCK | 1 | |
| 98F46103500000 | POSITIONNING TOOL | 1 | |
| 98F52803000100 | POSITIONING SENSOR MOUNTING TOOL | 1 | |
| 98F52803000102 | POSITION POSITIONING TARGET FITTING TOOL | 1 | |
| 98F54503023000 | RETAINER POSITIONING TOOL | 5 | |
| 98K7830H006-00 | LOCKING TOOL-FLAP SLAT LEVER,INT. POSITION | 1 | |
| 98L53103008000 | POSITIONNING TOOL FR02 | 1 | |
| 98S27105001002 | POSITIONING TOOL | 5 | |
| 98S57505002000 | POSITION FLAP TOOL | 1 | |
| 98V27301000000 | Elevator neutral position calibration tool | 5 | |
| 99-8089-6000 | TOOL: TORQUE SENSOR POSITION, | 6 | |
| 99A34201102000 | TOOL ASSY-POSITIONING AOA SENSOR | 1 | |
| 99F54503013000 | TOOL POSITIONING | 1 | |
| 9C1165 | TOOL- POSITIONING AFT MOUNT | 1 | |
| 9C1165G01 | POSITIONING TOOL | 3 | |
| 9MIT65-72788-34 | RUDDER NEUTRAL POSITION LOCATING TOOL, LOWER RUDDER | 1 | |
| 9MIT65-72788-35 | RUDDER NEUTRAL POSITION LOCATING TOOL, UPPER RUDDER | 1 | |
| A11038 | TOOL,POSITIONING | 1 | |
| A11043 | TOOL,POSITIONING | 2 | |
| A11046 | TOOL, POSITIONING | 2 | |
| A11048 | TOOL,POSITIONING | 1 | |
| A11053 | TOOL,POSITIONING | 1 | |
| A318-92011-0001 | POSITIONING TOOL | 1 | |
| A318-92011-0002 | POSITIONING TOOL | 1 | |
| A32031-8 | Truck Positioner - Boeing Tool | 1 | |
| A97007 | POSITIONING TOOL | 1 | |
| A97056 | TOOL,POSITIONING | 2 | |
| A97177 | TOOL-POSITIONING | 1 | |
| AB27001-A9Y | LOCKING TOOL-FLAP SLAT LEVER INT. POSITION | 1 | |
| AB27001-J2Z | TOOL - ZERO POSITIONING, THS ACTUATOR | 1 | |
| AB27001-J3T | LOCKING TOOL-FLAP SLAT LEVER,INT. POSITION | 1 | |
| AB27003-NX1 | LOCKING TOOL-FLAP SLAT LEVER INT. POSITION | 1 | |
| AFM-2 | Crimp Tool with K1168 Positioner for Boeing Twinax Contacts | 2 | |
| AGE13709 | Brake Position Sensor Unit (BPSU) Test Tool (Hamilton Sundstrand) | 1 | |
| AGE13709A | Brake Position Sensor Unit (BPSU) Test Tool (Hamilton Sundstrand) | 3 | |
| AGE17401 | Brake Position Sensor Unit (BPSU) Test Tool (Hamilton Sundstrand) | 4 | |
| B52-0001 | BEARING PULLER/ POSITIONING TOOL | 1 | |
| B81001046Z | TOOL POSITIONING | 1 | |
| BPT1 | BULLET POSITIONING TOOL 9.5 IN | 1 | |
| C01612001-001GT00-04 | SLAT RIGGING POSITIONING TOOL | 1 | |
| C1-21871 | TOOL: POSITIONING 5100 | 1 | |
| C21943-0-1 | POSITIONING ADAPTOR TOOL | 3 | |
| C22646 | TOWING POSITION SAFETY PIN TOOL | 13 | |
| CHA1629-0070 | Positioning Tool | 1 | |
| CM-S-264 | PLUG DECOMPOSITION TOOL | 3 | |
| CM-S-3895 | PLUG DECOMPOSITION TOOL | 1 | |
| CM-S-5015 | PLUG DECOMPOSITION TOOL | 2 | |
| CM-S-837 | PLUG DECOMPOSITION TOOL | 3 | |
| COM8-1 | Crimp Tool for Use with Comp Series Positioners | 2 | |
| CRIMPING TOOL - POSITIONER | CRIMPING TOOL - POSITIONER | 1 | |
| CS-710-147 | SPECIAL TOOLS A330 CS-710-147 MEASURING BONDING POSITION TOOL | 1 | |
| CS-710-148 | SPECIAL TOOLS A330 CS-710-148 MEASURING CONNECTOR POSITION TOOL | 1 | |
| D46218 | POSITIONING TOOL | 2 | |
| D46363 | POSITIONING TOOL | 1 | |
| DMC1119 | DMC1119 - AF8/AFM8 Tool Kit with All Military Positioners & Turret Heads | 2 | |
| DMC1386 | AFM8 Tool Kit with M22520/2-02 to M22520/2-18 Military Positioners | 2 | |
| DMC1633 | DMC1633 - AFM8 with 3 Positioners and 2 Plastic I/R Tool Kit | 2 | |
| DMC274 | CRIMPING TOOL AND POSITIONERS | 4 | |
| DMC5000 | Tool Kit with AF8, AFM8, and HX4 with All Mil-Spec Qualified Positioners, Turrets, and Die Sets (DMC5000 Series) | 1 | |
| DMC5002 | AFM8 Tool Kit with M22520/2-02 to M22520/2-40 Military Positioners (DMC5000 Series) | 1 | |
| DMC5004 | Tool Kit with AF8 and AFM8 with All Mil-Spec Qualified Positioners and Turrets (DMC5000 Series) | 1 | |
| DMC5007 | MH860 Tool Kit with Positioners (DMC 5000 Series) | 1 | |
| DMC5011 | Tool Kit with AF8, AFM8, MH860, HX3, HX4, General Purpose I/R Tools, & All Mil-Spec Qualified Positioners and Turrets (DMC5000 Series) | 1 | |
| DMC803 | AF8 and AFM8 Tool Kit with M22520/1-02 to M22520/1-17 and M22520/2-02 to M22520/2 (36 Positioners) | 2 | |
| DMC808 | M22520/7 & Positioner Tool Kit | 2 | |
| DMC986 | AF8 Tool Kit with Single Position Head, Removal Tool & Wire Stripper | 2 | |
| DMCK1721 | POSITIONER TOOL | 1 | |
| EC-D66547–A | POSITIONING TOOL | 1 | |
| F1481066 | POSITIONING TOOL | 1 | |
| F1481067 | POSITIONING TOOL | 1 | |
| F26711000 | POSITIONING TOOL | 1 | |
| F26804000 | POSITIONNING TOOL | 3 | |
| F270-70054-000W8500-01 | THSA TOOL ZERO POSITIONING | 1 | |
| F65-0-3493 | POSITION CHECKING TOOL | 1 | |
| F80137-1 | POSITIONER TOOL- ACTUATOR ROD END (CANCELED) | 1 | |
| F80137-2 | POSITIONER TOOL | 2 | |
| F80137-6 | POSITIONER TOOL PIN | 1 | |
| F80137-7 | POSITIONER TOOL | 2 | |
| F80216-1 | Miscellaneous Tool -Support Assembly. Transmitter. Flap Position | 3 | |
| F80216-2 | MISCELLANEOUS TOOL - SUPPORT ASSEMBLY TRANSMITTER, FLAP POSITION | 1 | |
| F80216-3 | Tool Flap Positioning | 1 | |
| FB98D0085 | LOCKING TOOL-FLAP SLAT LEVER, INT. POSITION | 1 | |
| FE380900001 | TOOL-POSITION,ZERO DEGREE | 1 | |
| FV292906000 | Translating Nut Positioning Tool− Horizontal Stabilizer Actuator | 2 | |
| G2P330 | POSITIONER, CRIMPING TOOL | 5 | |
| G601R521115-1 | TOOL, MID-POSITION LEVER SPACER, PAX DOO | 2 | |
| G601R521117-1 | TOOL, POSITION SPACER | 1 | |
| G67027240-1 | RUDDER RIGGING AND NEUTRAK POSITION TOOL KIT | 1 | |
| G670272401 | RUDDER RIGGING AND NEUTRAK POSITION TOOL KIT | 1 | |
| GS100 | Crimp Tool with GP295 Single Positioner Head | 2 | |
| GS200 | Crimp Tool with G2P330 Single Positioner Head | 1 | |
| GS20834-1 | WIRE LEAD BLOCK POSITIONING TOOL | 4 | |
| GS21133-1 | POSITION SETTING TOOL | 2 | |
| GS23485-2 | CONTROL POSITIONER TOOL | 24 | |
| GS23960-1 | Wire lead block positioning tool | 1 | |
| GS2B | HAND BANDING TOOL ( SET TENSION TO POSITION 6) | 7 | |
| GSB6110033 | CONTROL POSITIONER TOOL | 1 | |
| H46813 | POSITIONING TOOL | 2 | |
| H46868 | POSITIONING TOOL | 1 | |
| H47712 | POSITIONING TOOL | 6 | |
| HU55083-4 | TOOL: TROLLEY-POSITION | 2 | |
| HU55131-1 | TOOL: SUPPORT POSITION | 1 | |
| HX-4 | CRIMPING TOOL - POSITIONER | 13 | |
| HX4 | CRIMPING TOOL - POSITIONER | 13 | |
| IND78874 | Positioning Tool | 1 | |
| IND78886 | Positioning Tool | 1 | |
| IND78887 | Positioning Tool | 1 | |
| IND79983/4 | Positioning Tool | 1 | |
| IND80970 | TOOL-POSITIONING | 1 | |
| J20002-59 | 787 LOAD POSITIONER TOOL | 5 | |
| J55007-1 | Rigging tool-horizontal stabilizer trim actuator null position | 1 | |
| K1425 | CRIMPERS / CRIMPING TOOLS POSITIONER | 2 | |
| K1676 | POSITIONER Crimp tool | 2 | |
| K1860SE | Positioner, Ejector- Use MH999 Crimp Tool | 2 | |
| K1S | POSITIONER FOR CRIMP TOOL | 9 | |
| K27051-1 | MEASURING TOOL - ELECTRIC MOTOR ACTUATOR POSITION, SPOILER | 7 | |
| K27051-10 | MEASURING TOOL - ELECTRIC MOTOR ACTUATOR POSITION, SPOILER | 10 | |
| K27063-1 | RIGGING TOOL - HSTA NULL POSITION | 3 | |
| K32016-1 | 787 TRUCK POSITIONER TOOL | 9 | |
| K345 | TOOL, POSITIONER | 9 | |
| K40 | POSITIONER CRIMPING TOOL | 16 | |
| K42 | POSITIONER - CRIMPING TOOL | 10 | |
| K43 | CRIMP TOOL POSITIONER | 6 | |
| K441 | TOOL POSITIONER | 2 | |
| K673 | POSITIONER DMC CRIMPING TOOL | 8 | |
| K910 | CONTACT POSITIONER, TERMINAL CRIMPING TOOL | 2 | |
| K969SE | Positioner - Ejector Style - Use MH992 Crimp Tool | 2 | |
| K971S | Positioner - Use MH992 Crimp Tool | 2 | |
| L65723442A | POSITIONING TOOL | 1 | |
| L65723448A | POSITIONING TOOL | 1 | |
| M00401H001003A023S | TOOL, DAMPER ROD-END POSITIONING | 1 | |
| M0NT703128 | TOOL FOR SEAL POSITION | 1 | |
| M22520-2-02 | POSITIONER TOOL | 11 | |
| M22520-2-07 | K40 POSITIONER TOOL | 10 | |
| M22520-2-09 | POSITIONER - CRIMPING TOOL | 6 | |
| M22520-2-14 | POSITIONER - CRIMPING TOOL | 1 | |
| M22520-5-01 | CRIMPING TOOL - POSITIONER | 23 | |
| M22520-7-02 | CRIMPING TOOL, POSITIONER | 1 | |
| M22520-7-04 | POSITIONER TOOL | 1 | |
| M22520-7-09 | CRIMPING TOOL, POSITIONER | 1 | |
| M22520/1-02 | POSITIONER FOR AF8 CRIMP TOOL | 18 | |
| M22520/1-05 | UNIVERSAL POSITIONER FOR CRIMP TOOL | 9 | |
| M22520/2-01 | HAND TOOL WITH POSITIONER K-345 | 18 | |
| M22520/2-02 | POSITIONER FOR CRIMP TOOL | 11 | |
| M22520/2-06 | DMC CRIMP TOOL POSITIONER | 10 | |
| M22520/2-07 | POSITIONER, CRIMPING TOOL | 10 | |
| M22520/2-09 | POSITIONER - CRIMPING TOOL | 6 | |
| M22520/2-10 | TOOL, POSITIONER | 7 | |
| M22520/31-02 | POSITIONER, CRIMPING TOOL | 1 | |
| M22520/7-08 | CRIMP TOOL POSITIONER 20 GAUGE | 1 | |
| M22520/7-12 | POSITIONER TOOL | 6 | |
| M46163 | TOOL POSITIONING SLIDE VALVE | 1 | |
| M57092A0000-01 | POSITIONNING TOOL | 1 | |
| M65724102 | POSITIONING TOOL | 1 | |
| M65724159B | POSITIONING Tool | 1 | |
| M65725007A | POSITIONING TOOL | 1 | |
| M65725065 | POSITIONING TOOL | 1 | |
| M65725227A | POSITIONNING TOOL | 1 | |
| M65725410 | MICROSWITCH POSITION ADJUSTMENT TOOL | 1 | |
| M65725433 | POSITIONNING TOOL | 1 | |
| M65725613 | POSITIONING TOOL | 1 | |
| M65725897 | POSITIONNING TOOL | 1 | |
| M65725898 | POSITIONNING TOOL | 1 | |
| M65725920 | POSITIONING TOOL | 1 | |
| M65725959 | POSITIONNING TOOL | 1 | |
| M65725975 | POSITIONNING TOOL | 1 | |
| M65726400 | Positioning Tool | 1 | |
| M65727638 | POSITIONING TOOL | 1 | |
| MATX04D52880165 | POSITIONING TOOL | 1 | |
| MD1002 | CRIMP TOOL AND POSITIONER ASS'Y | 1 | |
| MIT65-56638-1 | MISCELLANEOUS TOOL - SUPPORT ASSEMBLY, TRANSMITTER, FLAP POSITION | 1 | |
| MIT65B90238 | MISCELLANEOUS TOOL RIGGING - TRANSDUCER INSTALLATION, LINEAR POSITION | 1 | |
| MJK651-01 | SPOILER POSITION CHECKING TOOL | 1 | |
| MS3191-A | CRIMPING TOOL WITHOUT POSITIONER | 3 | |
| MS3191A | CRIMPING TOOL WITHOUT POSITIONER | 3 | |
| MS90387-1 | HAND BANDING TOOL ( SET TENSION TO POSITION 6) | 2 | |
| MTAX04D52880165 | POSITIONING TOOL | 1 | |
| NDT722-P1 | SPECIAL TOOLS PROBE POSITIONER | 2 | |
| NDT722-P2 | SPECIAL TOOLS PROBE POSITIONER | 2 | |
| NDT722-P3 | SPECIAL TOOLS PROBE POSITIONER | 2 | |
| OS22948 | Tool, Positioning | 2 | |
| OTC303-530 | CAM POSITION TOOL | 1 | |
| OU145271 | POSITIONING TOOL | 1 | |
| OU190359 | STAB LOCK O POSITION TOOL | 4 | |
| OU190834 | TOOL- ZERO POSITIONING, THS | 22 | |
| OU190844 | ZERO POSITIONING TOOL | 29 | |
| OU300149 | Positioning Tool | 1 | |
| P20-3191-20 | POSITIONNING TOOL | 1 | |
| Q47749 | DRIVE BLOCKS POSITION TOOL | 9 | |
| RB T102046 | Main Rotor Blade Positioning Tool | 1 | |
| RBW109-3110-10-101 | Swashplate Positioning Tool | 1 | |
| RBW6705G03331-3G | Positioning Tool Main Rotor Rotating Scissor | 2 | |
| RBW895-3101-34- 101 | BEARING POSITIONING TOOL | 1 | |
| RBW895-3101-34-101 | Bearing Positioning Tool | 1 | |
| RF69002-R815505 | WIRE LEAD BLOCK POSITIONING TOOL | 1 | |
| RRT064977 | REPOSITIONING TOOL | 1 | |
| RRT103967 | EBAS - POSITIONING TOOL | 1 | |
| S47214 | TOOL-POSITIONING | 1 | |
| S47219 | TOOL-POSITIONING | 1 | |
| S47221 | TOOL-POSITIONING | 1 | |
| SB84-78-02-1 | TOOL, POSITIONING, FWD | 1 | |
| SB84-78-02-2 | TOOL, POSITIONING, AFT | 1 | |
| SE1511 | POSITIONING TOOL | 5 | |
| SST2 | POSITIONING TOOL | 1 | |
| ST2220-1 | TOOL POSITIONER | 1 | |
| ST2220-1-1 | TOOL POSITIONER | 2 | |
| ST2220-1-10A | TOOL POSITIONER | 1 | |
| ST2220-1-12 | TOOL POSITIONER | 1 | |
| ST2220-1-17 | TOOL POSITIONER | 1 | |
| ST2220-1-20 | TOOL POSITIONER | 1 | |
| ST2220-1-28A | TOOL POSITIONER | 1 | |
| ST2220-1-31 | TOOL POSITIONER | 1 | |
| ST2220-1-33A | TOOL POSITIONER | 1 | |
| ST2220-1-40 | TOOL POSITIONER | 1 | |
| ST2220-1-41 | TOOL POSITIONER | 1 | |
| ST2220-1-43 | TOOL POSITIONER | 1 | |
| ST2220-1-60 | TOOL POSITIONER | 1 | |
| ST2220-10-S4 | TOOL POSITIONER | 1 | |
| ST2220-10-S5 | TOOL POSITIONER | 1 | |
| ST2220-10-S6 | TOOL POSITIONER | 1 | |
| ST2220-2-4 | TOOL POSITIONER | 2 | |
| ST2220-3-14 | TOOL POSITIONER | 2 | |
| ST600-348 | NOSE WHEEL POSITION TOOL | 1 | |
| T 27296 | Installing Tool, Seal Stop Positioning Piston | 1 | |
| T 27297 | Installing Tool, Seal Stop Positioning Piston | 1 | |
| T-27296 | INSTALLING TOOL, SEAL, STOP POSITIONING | 1 | |
| T-27297 | INSTALLING TOOL, SEAL, STOP POSITIONING PISTON | 1 | |
| T0357 | HCG POSITION SENSOR REMOVAL TOOL | 1 | |
| T101865 | POSITIONING TOOL | 3 | |
| T103287-101 | POSITIONING TOOL | 1 | |
| T103287-109 | TOOL POSITIONING | 1 | |
| T103287-111 | TOOL ASSEMBLY, COLLECTIVE LEVER POSITIONING TOOL | 1 | |
| T103288-101 | TOOL POSITIONING | 1 | |
| T103356 | TOOL ASSY CYCLIC POSITION SENSOR | 1 | |
| T103356-101 | POSITION SENSOR RIGGING TOOL | 2 | |
| T27296 | Installing Tool, Seal, Stop Positioning Piston | 1 | |
| T27297 | Installing Tool, Seal, Stop Positioning Piston | 1 | |
| T45202 | Positionning Tool | 1 | |
| TH1A | POSITIONER FOR AF8 CRIMP TOOL | 13 | |
| TM0677G001 | POSITIONING TOOL | 3 | |
| TM1447G002 | ENGINE RELATIVE POSITION TOOL | 2 | |
| TM4567G001 | POSITIONNING TOOL | 2 | |
| TM7002G001 | POSITIONING TOOL | 3 | |
| TM7706G001 | BEARING POSITIONING TOOL | 1 | |
| TP-974 | POSITIONER - FOR CRIMPING TOOL M310 | 2 | |
| TP1791 | Single Position Turret for M309 Crimp Tool | 2 | |
| TP567 | CONTACT POSITIONER,TERMINAL CRIMPING TOOL | 3 | |
| TP673 | TOOLS SINGLE POSITION HEAD | 4 | |
| TP960 | HEAD, SINGLE POSITION (CRIMP TOOL TURRET) | 3 | |
| 98A36103501000 | POSITIONING TOOL,FAN AIR VALVE | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
