| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| TMY20-29-503 | PLUG H | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| J78007-104 | REMOVAL/INSTALLATION EQUIPMENT - EXHAUST SLEEVE AND PLUG | 5 | |
| (CALIB) 10-101950-81 | SHUNT PLUG - FIRE EXTINGUISHER CARTRIDGE (CALIBRATION) | 1 | |
| (CALIB) 1709564 | Thread plug gauge (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 21931A1-334 | 23HK PLUG 3-CABIN | 1 | |
| (CALIB) J26007-1 | TEST BOX, CARGO SMOKE HEATER, TEST PLUG (CALIBRATION) (CALIBRATION) | 1 | |
| 0-2964-28 | GAUGE, THREAD PLUG UNF-2B | 1 | |
| 0.500-20 UNJF-3B | RING PLUG (THERMOCOUPLE CLEANER) | 1 | |
| 01473747500/10 | PLUG GAUGE HELICOIL THREADS UNF 1/4" -28 PITCH 0.91 CLASS 2B (BOELLHOFF REF.) | 1 | |
| 02/04/4027 | HELI-COIL THREAD PLUG GUAGE | 1 | |
| 046-55-999-0231 | HEADSET WITH ONE PLUG | 5 | |
| 06CPB | HELICOIL KIT 6/32 PLUG TAP | 1 | |
| 07-010008 | CABLE, BNC TO MCX RIGHT ANGLE PLUG, 6' LENGTH | 2 | |
| 070-0054 | EARTH BONDING PLUG 1X5MM POST | 1 | |
| 1-11676A | HOLD PLUG ATC | 1 | |
| 1-525441-1 | PLUG GAUGE, HANDTOOL | 1 | |
| 1-525441-3 | PLUG GAUGE HANDTOOL | 1 | |
| 1-525442-9 | PLUG GAUGE, HANDTOOL | 1 | |
| 1.0625-16UNJ-3B | THREAD PLUG TAP | 1 | |
| 1/4HP-SS | HEX PLUG | 1 | |
| 1/8 -27 ANPT | PLUG, HYDROSTATIC TEST PLUG, GAUGE FITTING | 1 | |
| 10 | SHUNT PLUG-FIRE EXTINGUISHER CARTRIDGE,HTL | 2 | |
| 10-1019-50-81 | SHUNT PLUG - FIRE EXTINGUISHER CARTRIDGE, HTL OR PROTECTIVE CAP (IF SUPPLIED BY BOTTLE VENDOR) | 17 | |
| 10-101950-081 | SHUNT PLUG-FIRE EXT CARTRIDGE,HTL | 13 | |
| 10-101950-10 | SHUNT PLUG-FIRE EXTINGUISHER CARTRIDGE,HTL | 1 | |
| 10-101950-81 | SHUNT PLUG-FIRE EXTINGUISHER CARTRIDGE,HTL | 17 | |
| 100-590031-1 | BLEED AIR SCOOP PLUG (EFFECTIVITY: LJ-502 THRU LJ-718; LW-1 THRU LW-228) (BEECHCRAFT CORP) | 2 | |
| 10013487-S91-1 | SAFETY PLUG WRENCH | 1 | |
| 100H | ELEMENT - HF ELEMENT PLUG IN | 2 | |
| 101-590107-1 | BLEED AIR INLET SCOOP PLUG (BEECHCRAFT CORP) | 3 | |
| 1019540-1-1- | SHROUD CONNECTION PLUG | 1 | |
| 10C1318G01 | MAIN IGNITER PLUGS REMOVAL WITH TOOL | 5 | |
| 10MIT65B01231-1 | PRESSURE TEST PLUG - SHOCK STRUT ASSEMBLY, BODY LANDING GEAR | 1 | |
| 10PRE65B00713 | PROTECTIVE EQUIPMENT - PROPULSION POD COVER THRUST REVERSER PLUG | 1 | |
| 10X1-AD46841-1 | SHORTING PLUG - EBA/MASTER (10X1-AD46841-1) | 1 | |
| 11-10786-1 | TOOL - POLISHING, CONTACT (TO CHECK IGNITER PLUGS) | 4 | |
| 11-1820 DB | 11-18260 DB ASSEMBLY B-14/28-50E APU/CHARGER EUROPEAN WITH CESSNA PLUG | 1 | |
| 11-8789 | IGNITION PLUG SHORTING | 1 | |
| 11252-A | WALTHER – PLUG NIPPLE (HP-004-1-6M516-01-FF) | 1 | |
| 114-1077 | TOOL FOR A LEAK TEST OF THE OVERINFLATION PLUG | 4 | |
| 114-1128 | THERMAL RELIEF PLUG TEST FIXTURE | 1 | |
| 114-1138 | LEAK TEST TOOL FOR THERMAL RELIEF PLUG | 1 | |
| 114-1145 | ADAPTER FOR A LEAK TEST OF PUSH-IN TYPE THERMAL REIEF PLUGS | 2 | |
| 114-1146 | THERMAL RELIRF PLUG TEST BLOCK FIXTURE | 1 | |
| 114-1147 | LEAK TEST OF THE TYPE THERMAL REIEF PLUGS | 2 | |
| 114-1151 | INSTALLATION OF O-RING ON THE TYPE THERMAL REIEF PLUG | 2 | |
| 114-1156 | THERMAL RELIEF PLUG TEST FIXTURE | 1 | |
| 114-1194 | LEAK TEST TOOL FOR THE OVERINFLATION PLUG | 1 | |
| 114-1233 | LEAK TOOL - THERMAL AND OVERINFLATION PLUG | 2 | |
| 114-1263 | TOOL TO CHECK OVERVENTILATION PLUG FOR LEAKS | 1 | |
| 114-1274 | Tool for leak test of the thermal relief plugs | 1 | |
| 114-1274 PM | Tool for leak test of the thermal relief plugs | 1 | |
| 114-1360 | TOOL FOR LEAK TEST OF THE THERMAL RELIEF PLUGS AND THE OVERINFLATION PLUG | 2 | |
| 114-1562 | LEAK CHECK TOOL THERMAL PLUG | 2 | |
| 114-1571 | TOOL FOR A LEAK TEST OF PUSH-IN TYPE THERMAL RELIEF PLUGS AND FOR THE OVERINFLATION PLUG | 3 | |
| 114-1616 | TOOL FOR A LEAK TEST OF PUSH-IN TYPE THERMAL RELIEF PLUGS AND OVERINFLATION PLUG | 1 | |
| 114-1618 | ADAPTER FOR A LEAK TEST OF PUSH-IN TYPE THERMAL RELIEF PLUGS | 1 | |
| 114-219 | PLUG - FOR THERMAL RELIEF AND OVERINFLATION TEST | 1 | |
| 114-263 | FIXTURE-FOR CHECK OF THE OVERINFLATION PLUGS FOR LEAKS | 5 | |
| 114-263 PM | FIXTURE-FOR CHECK OF THE OVERINFLATION PLUGS FOR LEAKS | 1 | |
| 114-263PM | FIXTURE-FOR CHECK OF THE OVERINFLATION PLUGS FOR LEAKS | 1 | |
| 114-306 | TOOLS FOR LEAK TEST OF THERMAL RELIEF PLUGS AND OVERINFLATION PLUG | 2 | |
| 114-306-AZL | TOOL FOR A LEAK TEST OF THE OVERINFLATION PLUG | 1 | |
| 114-349 | TOOL FOR A LEAK TEST OF THERMAL RELIEF PLUGS AND THE OVERINFLATION PLUG | 1 | |
| 1159GSE40005-1 | GENERATOR AIR EXHAUST PLUG | 1 | |
| 1159GSE40115-11 | THRUST REVERSER OUTLET PLUG ASSEMBLY | 2 | |
| 119.056 | HEAT GUN, WELDY PRO, EURO PLUG, 550°C, 230 V, 1800 W | 1 | |
| 11B36-11930 | TOOL, 16WR PLUG, PRESSURE SWITCH, A320 | 1 | |
| 11C3340G01 | GAGE, DIGITAL IMMERSION DEPTH – HOOK TYPE (FOR IGNITER PLUG) | 1 | |
| 11C3596 | FIXTURE - PLUG - NO. 5 BEARING OIL FLOW (FLOW CHECK FIXTURE) | 1 | |
| 11C4116 | NOZZLE PLUG TOOL (ENGLISH) | 1 | |
| 12-841210-100 | DRAIN HOLE BLANKING PLUG | 1 | |
| 124-3416 | LEMO STRAIGHT 50 OHMS RF ADAPTER BNC PLUG | 1 | |
| 12515G-12 | STD-1390 HEADPHONE - 600 OHM, WITH 1/4 INCH MONO RCAAUDIO PLUG | 14 | |
| 127K229G01 | SHORTING PLUG | 1 | |
| 128CEC1AAS2 | CHARGER: BATTERY,12V,2/4/8A, BATTERY MINDER,PLUG-N-RUN | 2 | |
| 130-910003-1 | PLUG ASSEM-EXHAUST STACK & FAIRING | 2 | |
| 130-910003-2 | PLUG ASSEM-EXHAUST STACK & FAIRING | 2 | |
| 1325-9 | BANAN PLUG 4MM WHT 5000V 15A STACKUP | 2 | |
| 134390/6M/B | CORDPRO, 6M, STRAIGHT TO RIGHT ANGLE PLUG, BLACK | 1 | |
| 134390/6M/R | CORDPRO, 6M, STRAIGHT TO RIGHT ANGLE PLUG, RED | 1 | |
| 14-6804-6000 | REGULATOR, NITROGEN SERVICING (HIGH PRESSURE) - FEMALE PLUG | 22 | |
| 14-8126-4000 | Thermal Relief Plug Tf | 1 | |
| 1490K11 | PLUG-IN PORTABLE LIGHT | 1 | |
| 15-200 | ONEWAY SHUTOFF ARO210 INTRCHG PLUG, 1/4" NPTF MALE THREAD | 2 | |
| 15-300 | ARO TYPE 14 AIR HOSE QUICK CONNECTS ( TYPE: PLUG 1/4" NPT, FEMALE THREAD ) | 2 | |
| 151-2012 | TEST PLUG - G SWITCH | 10 | |
| 1525ML | KH® Industrial Quality Portable Work Lights (Cord length: 25' (Straight)) (Note:: NEMA 1-15 Plug Included) (Overall length: 22-1/4" (57 cm)) (Type: 15 Watt Mighty) (Add to cart: Contact us to order) | 1 | |
| 1527T-305332 | GAGE,PLUG,THREAD,GO-NOGO,1"-12UNF,DOUBLE-END,TRU | 1 | |
| 1527T-315333 | GAGE,PLUG,THREAD,GO-NOGO,1"-12UNF,DOUBLE-END,TRU | 1 | |
| 1550ML | KH® Industrial Quality Portable Work Lights (Cord length: 25' (Straight)) (Note:: NEMA 1-15 Plug Included) (Overall length: 22-1/4" (57 cm)) (Type: 15 Watt Mighty) (Add to cart: Contact us to order) (Cord length: 50' (Straight)) (Note:: NEMA 1-15 Plug Inc | 1 | |
| 155S9-8D | DUST PLUG & CHAIN ASSEMBLY | 6 | |
| 16024/17 | GO NO GO PLUG GAUGE TYPE 56 H7 | 1 | |
| 1622M24P01 | PLUG, BORESCOPE, THREADED | 1 | |
| 1688-04 | THREAD PLUG GAGE | 1 | |
| 1688-06 | THREAT PLUG GAGE | 1 | |
| 1694-3 | GAGE-THREAD PLUG | 1 | |
| 170-99109-401 | PLUG GLARESHIELD ASSY | 3 | |
| 172-104 | CARB AIR INLET PLUG, oval shape (Early models, 1960-1966) | 1 | |
| 172-108 | CARB AIR INLET PLUG, rectangular shape (Earliest Models ,1959 and before) | 1 | |
| 17A1733G02 | SPLINE, PLUG SHAFT | 1 | |
| 18-234 | EXTRACTION TOOL SWITCH CONNECTOR PLUG | 14 | |
| 180-105 | EXHAUST PLUG | 1 | |
| 18024-00 | PREFORMED PACKING (USE WITH PLUG 10013922-S58-1) | 1 | |
| 18099-00 | PREFORMED PACKING (USE WITH PLUG 10013677-S58-3) | 1 | |
| 18193-9 | 9/16-18 -2B HELICOIL STRAIGHT FLUTE PLUG TAP | 1 | |
| 182-130 | EXHAUST PLUG | 1 | |
| 18253G-18 | HEADSET PLUG ADAPTER (H10-66) | 3 | |
| 189 | ELEMENT - HF ELEMENT PLUG IN | 7 | |
| 18C1030 | PLUG/ADAPTER SET - NO 5 BRG HOUSING | 1 | |
| 1900081-7 | LEE PLUG PUNCH | 1 | |
| 1900C-120 | HEAT EXCHANGER INLET PLUG | 1 | |
| 1900D-120 | HEAT EXCHANGER INLET PLUG | 1 | |
| 1927-04 | THREAD PLUG GAGE | 1 | |
| 1927-3 | HELICOIL PLUG GAGE | 1 | |
| 1927-4 | THREAD PLUG GAUGE | 1 | |
| 1927-6 | HELICOIL PLUG GAGE | 1 | |
| 196K4008-19 | PLUG-SUPPORT EXHAUST REMOVAL | 1 | |
| 1C6096 | GAGE, IMMERSION DEPTH-IGNITER PLUG | 1 | |
| 1C6096 REV D | GAGE, IMMERSION DEPTH-IGNITER PLUG | 1 | |
| 1C6837 | WRENCH SET, INSTALL & REMOVE LPTR FD SHAFT PLUG | 1 | |
| 1SP6 | Bowers 1SP6 SmartPlug Head M6 Thread Range 6-8mm / 0.235-0.315" | 1 | |
| 1X56134518 | OIL DRAIN HOSE FOR MAGNETIC PLUG WITH KNURLED KNOB | 1 | |
| 1X56137035 | OIL DRAIN HOSE FOR MAGNETIC PLUG WITH STAR KNOB OR ELECTRIC CHIP DETECTOR | 1 | |
| 1_0625-16UNJ-3B | THREAD PLUG TAP | 1 | |
| 2-100527 | PLUG, SHUNT | 1 | |
| 2-100831-1 | PLUG-SHUNT | 11 | |
| 2-131-159-01 | WASHER FLAT IGN PLUG | 1 | |
| 2-231652-0 | MOD PLUG HAND TOOL W/O DIES | 3 | |
| 2-231652-1 | MOD PLUG HAND TOOL ASSY W/DIE | 1 | |
| 2-231652-3 | MOD PLUG HAND TOOL ASSY W/DIE | 1 | |
| 2-231652-7 | MOD PLUG HAND TOOL ASSY W/DIE | 1 | |
| 2-231652-8 | MOD PLUG HAND TOOL ASSY W/DIE | 1 | |
| 2-525441-5 | plug gauge,handtool | 1 | |
| 2.000-16-UNS-3B-NO-GO | HELI-COIL TWINSERT THREAD PLUG GAUGE. | 1 | |
| 20-200 | SPARK PLUG HOLE CHASER | 6 | |
| 2000-160 | APU EXHAUST PLUG | 1 | |
| 560E-115 | INTAKE PLUGS, with pylon plugs (set of 4) | 1 | |
| 560E-114 | EXHAUST PLUGS (set of 2) | 1 | |
| 560E-100 | INTAKE COVER/EXHAUST PLUG SET (set of 6) | 1 | |
| 23 | Tesa 03160017 Mains cable without plug, 2 m for TTA 20 | 1 | |
| 250 | PHONE PLUG | 9 | |
| 260 | HEADPHONE PLUG | 4 | |
| 844.613 | (NON-RECOIL PLUG - DISCHARGE HEAD OUTLET (APU FIRE BOTTLE) | 1 | |
| 2024 | PLUG.125C'SUNK HD PIPE | 10 | |
| 20200 | SPARK PLUG HOLE CHASER | 6 | |
| 2025229-1 | PLUG, APU EXHAUST | 3 | |
| 2025229−1 | Plug − APU Exhaust | 3 | |
| 20327 | Conn;Adapter;50 Ohm; N Plug to BNC Jack; Straight; | 1 | |
| 2050-T12 | KH® Industrial Quality Portable Work Lights (Cord length: 25' (Straight)) (Note:: NEMA 1-15 Plug Included) (Overall length: 22-1/4" (57 cm)) (Type: 15 Watt Mighty) (Add to cart: Contact us to order) (Cord length: 50' (Straight)) (Note:: NEMA 1-15 Plug Inc | 1 | |
| 206-101 | ENGINE INLET PLUGS (206H - '98 & up, w/oil cooler inlet plug) (set of 3) | 1 | |
| 206B-105 | SWASH PLATE PLUG | 1 | |
| 206L-105 | SWASH PLATE PLUG | 1 | |
| 206L-125 | EXHAUST PLUG | 1 | |
| 208-106 | EXHAUST PLUG, STANDARD FAIRING | 1 | |
| 208-108 | EXHAUST PLUG, WIPAIRE EXHAUST DEFLECTOR | 1 | |
| 210-130 | EXHAUST PLUG | 1 | |
| 214-105 | SWASH PLATE PLUG | 1 | |
| 214ST-105 | SWASH PLATE PLUG | 1 | |
| 214ST-125 | EXHAUST PLUGS (set of 2) | 1 | |
| 2240 | AUDIO OSCILLATOR,200AB MULTIMETER, 2000A SOUND LEVEL METERB&K TYPE 2219 PHONE PLUG, PJ-051B CAPACITOR, 220 UF ±20%, 50 WVDC RESISTOR, 150-OHM ±5%, 3-WATT | 1 | |
| 224928-1 | PROCRIMP HT&D MOD PLUG ESR | 1 | |
| 230-201 | ENGINE INLET PLUGS (for use with snow baffles) (set of 2) | 1 | |
| 2313M60G01 | HYDRAULIC PUMP SPLINE PLUG | 1 | |
| 2366A523 | THREADED PLUG GAUGES | 1 | |
| 24PRE65B00713 | PLUG - TURBINE EXHAUST, JT9D-7Q ENGINE | 1 | |
| 2590 | Hole Plug | 6 | |
| 25C | ELEMENT - VHF ELE-MENT PLUG IN | 7 | |
| 260-8 | HEADPHONE PLUG | 10 | |
| 2600A | Champion Aerospace Model 2600A Spark Plug Vibrator Cleaner | 6 | |
| 26ME65B00713-1 | SLING - EXHAUST PLUG, ON-WING MAINTENANCE, JT9D ENGINE | 1 | |
| 27045A21 | HAND TAP SET (HSS PLUG CHAMFER) | 1 | |
| 27F-001-212-28-20-2300 | SPECIAL PLUG FOR FUEL FILTER FUNCTIONAL CHECK | 1 | |
| 28.01.3340 | CABLE, ELECTRICAL WITH R65BS PLUG (28VCC), LENGTH 500 CM (SUPERSOM) | 2 | |
| 2848-1 | PLUG GAUGES VALVE GUIDE STEM HOLE | 1 | |
| 2848-2 | PLUG GAUGES VALVE GUIDE STEM HOLE | 1 | |
| 2906 | Plug – Comp. Imp. Rear Stub Shaft | 1 | |
| 291615-1 | ADAPTER ASSY ALTERNATOR PLUG DRIVE SHAFT | 1 | |
| 2A1325 | PLUG, HOSE PRESSURE TEST | 1 | |
| 2A1325-3 | PLUG, HOSE PRESSURE TEST | 1 | |
| 2A1489-1 | PLUG DIFFUSER NHA:5A26441 | 5 | |
| 2C18040G02 | PULLER ASSEMBLY, REMOVE - PLUG, LPT SHAFT (PULLER ASSEMBLY) | 1 | |
| 2C6130 | GAGE,IMMERSION DEPTH-IGNITER PLUG | 1 | |
| 2C6613 | GAGE,IMMERSION DEPTH-IGNITER PLUG | 2 | |
| 2C6613 REV D | GAGE, IMMERSION DEPTH-IGNITER PLUG | 1 | |
| 2C6613C01 | GAGE, IMMERSION DEPTH - IGNITER PLUG | 1 | |
| 2C6613G01 | GAUGE, IMMERSION DEPTH - IGNITOR PLUG | 10 | |
| 2C66I3 | GAGE, IMMERSION DEPTH-IGNITER PLUG | 1 | |
| 2C81915G01 | PLUGS, LEAK CHECK (PLUGS) | 1 | |
| 2C81916 | PLUGS, LEAK CHECK A, TANK CAP | 1 | |
| 2C81916G01 | PLUGS, LEAK CHECK A, TANK CAP | 1 | |
| 2C81918 | PLUG, LEAK CHECK B, AXIS-A (B | 1 | |
| 2C81918G01 | PLUG, LEAK CHECK B, AXIS-A (B | 1 | |
| 2C81919 | PLUGS, LEAK CHECK C, MCD AND V | 1 | |
| 2C81919G01 | PLUGS, LEAK CHECK C, MCD AND V | 1 | |
| 2C81920 | PLUG, LEAK CHECK D, FILTER (D | 1 | |
| 2C81920G01 | PLUG, LEAK CHECK D, FILTER (D | 1 | |
| 2C81921 | PLUG, LEAK CHECK E, AXIS-A (E | 1 | |
| 2C81921G01 | PLUG, LEAK CHECK E, AXIS-A (E | 1 | |
| 2CPB | HELICOIL KIT 8/32 PLUG TAP | 1 | |
| 2F10055 | Plug, Vacuum Check | 1 | |
| 2HP50N-S-V | HEX PLUG | 1 | |
| 2HP50N-SS | HEX PLUG STAINLESS STEEL | 1 | |
| 2KEX-155 | ENGINE EXHAUST PLUGS (set of 2) | 1 | |
| 2KEX-160 | APU EXHAUST PLUG, (OEM P/N: F2MA910014) | 1 | |
| 2KLF16 | HANSON PLUG | 1 | |
| 3-8656 | PLUG WRENCH | 1 | |
| 3/8HP-B | HEX HEAD PLUG | 1 | |
| 3/8HP-S | HEX HEAD PIPE PLUG 3/8-18 NPT | 1 | |
| 30-552-0605 | EARTH BONDING PLUG – STUDS | 1 | |
| 30242 | PLUG, VENT WITH | 1 | |
| 305766-1 | PLUG IGNTR HV | 5 | |
| 308970A | HYDROTEST PLUG (HOSES & MANIFOLD) | 1 | |
| 309870A | TOOL,HYDROTEST PLUGS | 1 | |
| 310-106 | NOSE INLET PLUGS (short nose) (set of 2) | 1 | |
| 310-110 | EXHAUST PLUGS (set of 4) | 1 | |
| 3122-04-06 | BREATHER STOPPER PLUG | 1 | |
| 312253B | HOSE PLUG KIT | 1 | |
| 314A2610-1 | 737 EXHAUST PLUG | 1 | |
| 314A2610-68 | 737 EXHAUST PLUG | 1 | |
| 3162231CE | WRENCH SPARKPLUG | 1 | |
| 330-100 | DOGHOUSE APERTURE PLUG | 1 | |
| 330-105 | EXHAUST COVER/STARTER GENERATOR INLET PLUGS (set of 2) | 1 | |
| 332108-1 | THREADED PLUG | 1 | |
| 332108-2 | THREADED PLUG | 1 | |
| 332108-3 | THREADED PLUG | 1 | |
| 340-103 | HEATER INLET PLUG (340A on nose) | 1 | |
| 3402409-1 | PLUG SET ASSY, APU INTAKE AND EXHAUST | 1 | |
| 3403257-1 | PLUG SET, FLIGHT DECK AIR CONDITIONER | 1 | |
| 347-2000-3GSE | VENT PLUGFAN COWL RH DOOR | 3 | |
| 350A93-3381-00/PHP | TIGHT FIT PLUG INPUT FLANGE | 1 | |
| 350A93338100 | TIGHT FIT PLUG INPUT FLANGE | 1 | |
| 35M5M01160001 | SETTING TOOL - MICROSWITCH UNIT OR CABLE ADAPTER PLUG & OHMMETER (RANGE >1K OHM) | 2 | |
| 3600DD11450-7 | ALTITUDE SWITCH SHORTING PLUG | 1 | |
| 3694-4 | THREAD PLUG GAGE | 1 | |
| 39-01-2061 | HEADERS & WIRE HOUSINGS 6 CKT PLUG HOUSING | 1 | |
| 3FPB | HELICOIL KIT 10/32 PLUG TAP | 2 | |
| 3SF6467-501 | EXHAUST PLUG R/I OFF. WRENCH | 1 | |
| 3TSJ65B01539 | FLOW-THRU TEST PLUG | 2 | |
| 4000-150 | EXHAUST PLUGS, folding type (set of 2) | 1 | |
| 400XT-113 | ENGINE INTAKE & EXHAUST PLUG SET (set of 4) | 1 | |
| 400XT-121 | EXHAUST PLUGS (set of 2) | 1 | |
| 401-101 | HEAT EXCHANGER INLET PLUGS (set of 2) | 1 | |
| 4027-4-2 | HELI-COIL THREAD PLUG GAUGE 3B | 2 | |
| 4034-4-2 | HELI-COIL THREAD PLUG GAUGE 2B | 2 | |
| 40379 | Conn;Circ;CONN CIRC PLUG STR BAYO 12 SHL | 1 | |
| 4050-T12 | KH® Industrial Quality Portable Work Lights (Cord length: 25' (Straight)) (Note:: NEMA 1-15 Plug Included) (Overall length: 22-1/4" (57 cm)) (Type: 15 Watt Mighty) (Add to cart: Contact us to order) (Cord length: 50' (Straight)) (Note:: NEMA 1-15 Plug Inc | 1 | |
| 407-108 | EXHAUST PLUG | 1 | |
| 407-113 | EXHAUST PLUG (HP MODEL ONLY) | 1 | |
| 407-130 | SWASH PLATE PLUG | 1 | |
| 41034G02 | DAVID CLARK (DC) CLAA99- 14CRG 4-BAY BATTERY CHARGER FOR 9900/9100 SYSTEM BATTERIES. THE 4- BAY BATTERY CHARGER (CLAA99- 14CRG) REQUIRES A STANDARD 110V CORD WITH A THREE-PRONG PLUG FOR CHARGING | 3 | |
| 411-122 | HEAT EXCHANGER INLET PLUGS (in wing root) (set of 2) | 1 | |
| 412-105 | SWASH PLATE PLUG (set of 4) | 1 | |
| 414-102 | HEAT EXCHANGER INLET PLUGS (on leading edge of wing) (set of 2) | 1 | |
| 414-104 | HEAT EXCHANGER EXHAUST PLUGS (below leading edge of wing) (set of 2) | 1 | |
| 421-005 | DORSAL PLUGS, used with Canopy Cover (set of 2) | 2 | |
| 421-122 | HEAT EXCHANGER INLET PLUGS (in wing root) (set of 2) | 1 | |
| 421-127 | ENGINE EXHAUST PLUGS (set of 2) | 1 | |
| 421-128 | HEAT EXCHANGER EXHAUST PLUGS (below wing root) (set of 2) | 1 | |
| 424478-1 | SHUNT PLUG CARTRIDGE | 1 | |
| 424478-2 | SHUNT PLUG CARTRIDGE | 1 | |
| 425-115 | HEATER AIR INLET PLUG (on nose) | 1 | |
| 425-130 | EXHAUST PLUGS (set of 4) | 1 | |
| 427-125 | EXHAUST PLUGS (set of 2) | 1 | |
| 427-126 | DOGHOUSE NACA VENT PLUGS (set of 2) | 1 | |
| 427-127 | PLUGS SET, ABOVE & FORWARD OF EXHAUST (set of 2) | 1 | |
| 427-128 | PLUGS SET, BELOW & FORWARD OF EXHAUST (set of 2) | 1 | |
| 429-120 | EXHAUST PLUGS (set of 2) | 1 | |
| 430-201 | ENGINE INLET PLUGS (for use with snow baffles) (set of 2) | 1 | |
| 430-212 | SWASH PLATE PLUG | 1 | |
| 4332 | PLUG, CHA 580 INLET ASSEMBLY | 1 | |
| 434-340999 | SHORTING PLUG | 1 | |
| 441-130 | EXHAUST PLUGS (set of 2) | 1 | |
| 441-140 | AIR CYCLE MACHINE INLET PLUG (ON NOSE) | 1 | |
| 441-150 | PITOT COVERS & HEATER INLET PLUG SET (set of 3) | 1 | |
| 4428619-000 | Plug - Shunt | 2 | |
| 444-65255-000 | TEST TOOL FOR PRESSURE GAUGE REMOTE PLUG (YOU LIST THIS ON PARTSBASE) | 1 | |
| 449GGS0149-1 | APU EXHAUST PLUG | 1 | |
| 449GGS0149‐1 | APU EXHAUST PLUG | 1 | |
| 45-18188 | WRENCH,SOCKET;|SERIES 568 3/4" SOCKET TO 1/2" PLUG ADAPTER; | 1 | |
| 4500001A | APU EXHAUST DUCT PLUG | 1 | |
| 45235 | WRENCH, BORESCOPE PLUG | 1 | |
| 455-65BNC5006113NE | TERMINATOR COAX CONNECTOR PLUG, MALE PIN BNC 50 OHMS | 1 | |
| 455-65BNC5007133NE | ADAPTER COAXIAL CONNECTOR BNC PLUG, MALE PIN TO BNC JACK, FEMALE SOCKET (2) 50 OHMS | 1 | |
| 45Z | MILBAR Connector Plug Pliers (Cannon Plug Pliers) - Made in the USA! | 1 | |
| 466-731 | Shell; Door Plug | 6 | |
| 4660A | A330 WHEEL INFLATOR PLUG | 9 | |
| 467-119-002 | 6 FOOT SHIELDED CABLE WITH 2 BNC MALE PLUGS | 1 | |
| 467-147-001 | 6 FOOT SHIELDED CABLE WITH 2 BNC FEMALE PLUGS | 1 | |
| 4757T163 | HEX-HEAD PLUG | 1 | |
| 4757T73 | HEX-HEAD PLUG | 1 | |
| 4757T74 | HEX-HEAD PLUG | 1 | |
| 4757T75 | HEX-HEAD PLUG | 1 | |
| 4760-2 | GLOWPLUG WRENCH 8MM | 1 | |
| 480-105 | EXHAUST PLUG | 1 | |
| 488-125-477-0-B | EXHAUST CONE/PLUG | 1 | |
| 49-155 | PLUG, THERMAL RELIEF | 1 | |
| 4FPB | TAP, PLUG - HELICOIL | 1 | |
| 4GP | PLUG, MS GAGE PORT, WITH O-RING | 1 | |
| 5-15P | 125V DETACHABLE PLUG ADAPTER 15A | 1 | |
| 5-15P PLUG | 125V DETACHABLE PLUG ADAPTER 15A | 1 | |
| 5-80786-00-00 | PW4000 EXHAUST PLUG/CONE WITH ADAPTER | 1 | |
| 505-105 | SWASH PLATE PLUG | 1 | |
| 505-120 | EXHAUST PLUG | 1 | |
| 50C | PLUG DASH IN ELEMENT | 1 | |
| 5110 | IGNITION LEAD 3/4 STRAIGHT FOR RHM TYPE PLUG | 1 | |
| 51154TF1 | TEST PLUG (PARKER HANNIFIN CORPORATION) | 1 | |
| 5120-99-609-6339 | CORE PLUG WRENCH | 1 | |
| 514148-34 | RATING PLUG -THRUST 26K | 1 | |
| 517KR | NACA PLUG - FUEL TANK INERTING SYSTEM EXHAUST | 1 | |
| 5214A0000-01 | TOOL - INSTL / RMV, WHEEL SPEED TRANSDUCER PLUG | 4 | |
| 522428100C | CABLE FOR HEADSET 1800MM, INCL. PLUG FOR A/C | 1 | |
| 523763-1 | PLUG GAUGE, HANDTOOL | 1 | |
| 523KR | ECS EXHAUST PLUG | 1 | |
| 525440-1 | PLUG GAUGE, HANDTOOL | 1 | |
| 525440-3 | PLUG GAUGE, HANDTOOL | 1 | |
| 525441-2 | PLUG GAUGE, HANDTOOL | 1 | |
| 525441-3 | PLUG GAUGE, HANDTOOL | 1 | |
| 525442-1 | PLUG GAUGE, HANDTOOL | 4 | |
| 525442-2 | PLUG GAUGE, HANDTOOL | 3 | |
| 525442-3 | PLUG GAUGE, HANDTOOL | 3 | |
| 525442-4 | plug gauge,handtool | 1 | |
| 525442-6 | PLUG GAUGE, HANDTOOL | 3 | |
| 525442-8 | PLUG GAUGE, HANDTOOL | 2 | |
| 525442-9 | plug gauge,handtool | 2 | |
| 525KR | APU EXHAUST PLUG | 1 | |
| 53065TF1 | COMPENSATOR PLUG FIXTURE PARKER HSD TESTING | 1 | |
| 53100141-1 | PLUG,SHUNT | 17 | |
| 53100141-1A | PLUG,SHUNT | 1 | |
| 53100141-4 | PLUG SHUNT | 1 | |
| 54860 | HI-CARBON PLUG TAP BIT (3 PACK) | 1 | |
| 549033-1 | DUOPLUG HANDZANGE | 1 | |
| 55-1021-02 | HARNESS W/ CANNON PLUG (MALE/FEMALE) | 3 | |
| 558-2-05987 | PLUG CANISTER PRESSURE SWITCH CONNECTION | 1 | |
| 55914S0000 | ALIGNMENT PLUG A 300 FLAP SHAFT | 1 | |
| 56595S0003 | Holding Plug | 1 | |
| 572-510-9196 | PLUG. MACHINE | 4 | |
| 572-510-9198 | PLUG, MACHINE | 1 | |
| 572-8510-9503 | PLUG, MACHINE | 1 | |
| 575KR | PLUG APU EXHAUST | 1 | |
| 57943 | 57943;CBL PSDAF-F16 W2 SHORTING PLUG | 1 | |
| 58P-101 | ENGINE COWL PLUGS (includes Intake, Cowl Top, Turbo Supercharger Air Inlet & Intercooler inlet plugs) (set of 14) | 1 | |
| 58P-105 | SMALL COWL PLUGS (includes Cowl Top, Turbo Supercharger Air Inlet & Intercooler Inlet plugs) (set of 10) | 1 | |
| 58P-109 | FRESH AIR INLET/EXHAUST PLUGS (set of 2) | 1 | |
| 58P-110 | HEATER INLET PLUGS (on nose) (set of 2) | 1 | |
| 58P-111 | A/C EXHAUST PLUGS (on left nacelle) (set of 2) | 1 | |
| 58TC-101 | ENGINE COWL PLUGS (includes Intake, Cowl Top, Turbo Supercharger Air Inlet & Intercooler inlet plugs) (set of 12) | 1 | |
| 58TC-105 | SMALL COWL PLUGS (includes Cowl Top, Turbo Supercharger Air Inlet & Intercooler Inlet plugs) (set of 8) | 1 | |
| 58TC-109 | FRESH AIR INLET/EXHAUST PLUGS (set of 2) | 1 | |
| 58TC-110 | HEATER INLET PLUGS (on nose) | 1 | |
| 58TC-111 | A/C EXHAUST PLUG (on left nacelle) | 1 | |
| 59000091-2 | HYDROTEST PLUG | 1 | |
| 5FPB | HELICOIL KIT 5/16 -24 PLUG TAP | 1 | |
| 5SP130 | Bowers 5SP130 SmartPlug Head M10 Thread Range 130-140mm / 5.118-5.512" | 1 | |
| 5SP270 | Bowers 5SP270 SmartPlug Head M10 Thread Range 270-280mm / 10.630-11.024" | 1 | |
| 5SP45 | Bowers 5SP45 SmartPlug Head M10 Thread Range 45-49mm / 1.772-1.929" | 1 | |
| 5T3-8656 | PRESSURE PLUG WRENCH | 1 | |
| 600-150 | ENGINE EXHAUST PLUG | 1 | |
| 601R262002-1 | SHUNT PLUG, DISCHARGE CARTRIDGE | 1 | |
| 60837-008 | 66TRA DYNAMIC HANDHELD MICROPHONE, RIGHT ANGLE PLUG | 1 | |
| 61-3802 | PROTECTIVE PLUG: 61-3802 THREAD PLUG | 1 | |
| 6141 | BOOSTER CABLE, SET WITH 6216 PLUG LENGTH 15' | 1 | |
| 62100-6400 | Plug and Receptacle Housing Removal Tool | 1 | |
| 62200-2000 | Stick Insertion Tool With 200 Circuit Plugs | 1 | |
| 62201-8654 | Press-In Tool for 80A Right Angle Plug | 1 | |
| 62201-8655 | Press-In Tool for 150A Right Angle Plug | 1 | |
| 62201-8673 | Plug and Receptacle Housing Press-In Tool for Plug and Receptacle | 1 | |
| 62202-3600 | Right Angle Plug Assembly Stiffener Removal Tool | 1 | |
| 62202-3700 | Right Angle Plug Removal Tool | 1 | |
| 630045-GB | PLUG GAUGE WITH FULL CERTIFICATION | 1 | |
| 630046-GA | PLUG GAUGE WITH FULL CERTIFICATION | 1 | |
| 630046-GC | PLUG GAUGE WITH FULL CERTIFICATION | 1 | |
| 630046-GD | PLUG GAUGE WITH FULL CERTIFICATION | 1 | |
| 636-4000-23GSE | EXHAUST EXIT AREA PLUG | 5 | |
| 636-4000_23GSE | EXHAUST EXIT AREA PLUG | 5 | |
| 63819-9600 | Hand Crimp Tool For Projector Lamp Plug and Receptacle Terminal | 1 | |
| 63823-5800 | Hand Crimp Tool For 3.7 Led Plug Male Crimp Terminals | 1 | |
| 63823-9100 | Hand Crimp Tool for 36P Robot Connector Plug and Receptacle Terminals | 1 | |
| 63825-5000 | Hand Crimp Tool for 2.50mm Pitch Floating Wire-to-Board Plug Crimp Terminal | 1 | |
| 64300-200 | Headset; Double Plug | 21 | |
| 64300-210 | AIRMAN 750 FITTED WITH XLR-512C PLUG | 12 | |
| 64400-200 | HEADPHONE - 600 OHM, WITH 1/4 INCH MONO AUDIO PLUG | 1 | |
| 64537 | GAGE, FLAT PLUG - CONNECTING ROD BUSHING REJECTION ADQUIRIR | 1 | |
| 64681 | DRIVER, CRANKSHAFT WELCH PLUG ADQUIRIR | 1 | |
| 64906 | PLUG, BEARING, HIGH COMPRESSION CRANKCASE ADQUIRIR | 1 | |
| 65-44761-F16 | Input Cavity Plug Torque Wrench Adapter | 1 | |
| 6534K43 | Plugs, Threaded Male Pipe | 1 | |
| 654-10-101950-081 | SHUNT PLUG-FIRE EXTINGUISHER CARTRIDGE,HTL | 1 | |
| 657105_200 | TORQUE WRENCH WITH PLUG-IN REVERSIBLE RATCHET, MAXIMUM TORQUE: 200N·M | 1 | |
| 660-021M12N | COVER - ELECTRICAL PLUG, WITH LANYARD (SHELL SIZE 12) | 1 | |
| 66T-RA | 66TRA DYNAMIC HANDHELD MICROPHONE, RIGHT ANGLE PLUG | 1 | |
| 66TRA | TELEX MICROPHONE RT ANGLE PLUG | 1 | |
| 6877804-10 | MIL-PRF-28876 MQJ 8 CH PLUG | 1 | |
| 6877804-13 | MIL-PRF-28876 MQJ 31 CH PLUG | 1 | |
| 69008-1100 | Parallel Action Handtool for Shielded Plug, Cat 5, 8/8 Circuit, Short Body | 1 | |
| 69008-1101 | Die Set for 690081100, Shielded Plug, Cat 5, 8/8 Circuit, Short Body | 1 | |
| 69008-1104 | Parallel Action Handtool for Shielded Plug, FCC 68, 8/8 Circuit, Short Body | 1 | |
| 69008-1105 | Die Set for 690081104, Shielded Plug, FCC 68, 8/8 Circuit, Short Body | 1 | |
| 69008-1106 | Parallel Action Handtool for Modular Plug, FCC 68, 8/8 Circuit, Long Body | 1 | |
| 69008-1114 | Parallel Action Handtool for Modular Plug FCC 68, 6/6 Circuit, Short Body | 1 | |
| 69008-1118 | Die Set for 690081113, Modular Plug, FFC 68, 6/4 Circuit, Short Body | 1 | |
| 69008-1119 | Die Set for 690081114, Modular Plug, FFC 68, 6/6 Circuit, Short Body | 1 | |
| 69008-1120 | Parallel Action Handtool for Modular Plug, FCC 68, 4/4 Circuit, Short Body | 1 | |
| 69008-1121 | Parallel Action Handtool for Modular Plug, 6/4 Circuit, Short Body | 1 | |
| 69008-1122 | Parallel Action Handtool for Modular Plug, FCC 68, 6/6 Circuit, Short Body | 1 | |
| 69008-1123 | Parallel Action Handtool for Modular Plug, FCC 68, 8/6 Circuit, Short Body | 1 | |
| 69008-1124 | Parallel Action Handtool for Modular Plug, FCC 68, 8/8 Circuit, Short Body | 1 | |
| 69008-1125 | Die Set for 690081120, Modular Plug, FCC 68, 4/4 Circuit, Short Body | 1 | |
| 69008-1126 | Die Set for 690081121, Modular Plug, 6/4 Circuit, Short Body | 1 | |
| 69008-1127 | Die Set for 690081122, Modular Plug, FCC 68, 6/6 Circuit, Short Body | 1 | |
| 69008-1129 | Die Set for 690081124, Modular Plug, FCC 68, 8/8 Circuit, Short Body | 1 | |
| 69008-1184 | Handtool for Telecom Plug, Type C Crimp with Diameter 6.0 Cable | 1 | |
| 69008-1185 | Die Set for Telecom Plug, Type C Crimp with Diameter 6.0 Cable | 1 | |
| 69008-1192 | Handtool for Telecom Plug, Type C Crimp with Diameter 6.0 Cable | 1 | |
| 69020-0140 | Arbor Press Fixture for Modular Plug, FCC 68, Short Body, 8/8 Circuit | 1 | |
| 6FPB | HELICOIL KIT 3/8 – 24 PLUG TAP | 1 | |
| 6FPB | HELICOIL PLUG TAP | 1 | |
| 6GP | PLUG, FUSIBLE PLUG PORT, WITHO-RING | 1 | |
| 700-T-091-19 | TEST PLUG WITHOUT TEST PORT | 1 | |
| 700-T-091-9 | TEST PLUG WITH TEST PORT | 1 | |
| 700T09119 | VACUUM TEST PLUG WITHOUT TEST PORT | 1 | |
| 700T0919 | VACUUM TEST PLUG WITH TEST PORT | 1 | |
| 70700-20500-043 | PLUG, ENGINE EXHAUST | 1 | |
| 70700-20502-043 | PLUG, APU EXHAUST | 1 | |
| 70700-77108-042 | PLUG, EXHAUST FAN SO COOLING | 1 | |
| 71700-77500-041 | PLUG ASSY, AVIONICS EXHAUST | 1 | |
| 736-023 | DUST PLUG & CHAIN ASSY | 1 | |
| 74-21-21 | COMBUSTION CHAMBER IGN PLUG ALIGN. TOOL | 1 | |
| 751148ME | PRESSURE TEST PLUG (PRESSURE SWITCH) | 1 | |
| 7A0431 | PLUG HYD PUMP | 1 | |
| 7FPB | HELICOIL KIT 7/16-20 PLUG TAP | 1 | |
| 7MIT65B94600-15 | PLUG DISPATCH CSD/GE | 1 | |
| 7MIT65B94600-16 | PLUG DISPATCH CSD/GE | 1 | |
| 8011453-508 | PLUG,WASHER | 1 | |
| 8011506-508 | WASHER-SPECIAL TOOL FOR PLUG | 1 | |
| 825-MIG | KH® Industrial Quality Portable Work Lights (Cord length: 25' (Straight)) (Note:: NEMA 1-15 Plug Included) (Overall length: 22-1/4" (57 cm)) (Type: 15 Watt Mighty) (Add to cart: Contact us to order) (Cord length: 50' (Straight)) (Note:: NEMA 1-15 Plug Inc | 1 | |
| 83330670-1 | HYDROTEST PLUG | 1 | |
| 83330670-2 | PLUG HYDROSTATIC TEST | 1 | |
| 83330679-2 | PLUG HYDROSTATIC TEST | 2 | |
| 834740-2 | PLUG MACHINE | 1 | |
| 848162-508 | WASHER,PLUG | 1 | |
| 856A2007P01 | WRENCH IGNITOR PLUG | 20 | |
| 856A2401 | PLUG, RETENTION - RADIAL DRIVE SHAFT LOWER PART | 1 | |
| 856A2401 REV NC | PLUG, RETENTION-RADIAL DRIVE SHAFT LOWER PART | 1 | |
| 856A2401P01 | Plug Hold Radial Drive Shaft | 3 | |
| 856A2573 | LPT SHAFT PLUG PULLER | 2 | |
| 856A2573G01 | ADAPTOR PULL LP SHAFT PLUG | 6 | |
| 856A2632G01 | PULL LPT-SHAFT PLUG ADAPTER | 23 | |
| 856A2807G46 | ID PLUG -7B SAC WITH BSV | 2 | |
| 856A2807G49 | ID PLUG -7B/3 SAC W/O BSV (TECH. INSERTION) | 2 | |
| 856A3104 | TUBE DUMMY LPT SHAFT PLUG | 1 | |
| 856A3104G03 | TUBE DUMMY LPT SHAFT PLUG | 1 | |
| 856A3260 | PLUG EXTRACT LPT SHAFT COMPONENTS | 1 | |
| 856A3260 G01 | Plug Extraction ‐ Main Components LPT Shaft | 1 | |
| 856A3260G02 | Extraction Plug - Main Components, LPT Shaft | 10 | |
| 856A3430G01 | Pusher, Distributor & Plug | 1 | |
| 856A3566 | TOOL SET PUSH PLUGS & OIL DIST AGB | 1 | |
| 856A3617 | PUSH/PULLER MAGNETIC PLUG | 2 | |
| 856A3617G01 | PUSH/PULL MAGNETIG PLUG OF LUBE UNIT | 32 | |
| 856A3617G02 | PUSHER/PULLER - LUBE UNIT MAGNETIC PLUG | 1 | |
| 856A3866 | SET, PUSH PLUG AGB | 1 | |
| 857641-2170 | A30 HEADSET, XLR5 PLUG, W/O BT, FLEX | 1 | |
| 8C3520 | PLUG - OIL FLOW TEST - TGBX - HORIZONTAL | 1 | |
| 8CC-MIG | KH® Industrial Quality Portable Work Lights (Cord length: 25' (Straight)) (Note:: NEMA 1-15 Plug Included) (Overall length: 22-1/4" (57 cm)) (Type: 15 Watt Mighty) (Add to cart: Contact us to order) (Cord length: 50' (Straight)) (Note:: NEMA 1-15 Plug Inc | 1 | |
| 8FPB | HELICOIL KIT ½-20 PLUG TAP | 1 | |
| 8PRE65B00713 | PLUG - TURBINE EXHAUST, JT9D ENGINE (EXCEPT JT9D-7Q) | 1 | |
| 90-590020-1 | BLEED AIR SCOOP PLUG (EFFECTIVITY: LJ-719 AND AFTER; LW-229 AND AFTER) (BEECHCRAFT CORP) | 2 | |
| 900EX-120 | EXHAUST PLUGS (folding type) (set of 3) | 1 | |
| 900EX-123 | CENTER EXHAUST PLUG (folding type) | 1 | |
| 900EX-125 | EXHAUST PLUGS (non-folding type) (set of 3) | 1 | |
| 900EX-135 | APU EXHAUST PLUG | 1 | |
| 90441 | Hearing Protection (Description: Ear Covers) (Add to cart: Add To Cart) (Description: Ear Plugs & Carrying Case) (Add to cart: Add To Cart) | 1 | |
| 0000100440 | THREADED PLUG | 1 | |
| 0000100690 | PLUG,THREADED | 1 | |
| 213628 | SYNCROPHASER BREAKOUT BOX(ROUND PLUG) LM REF ATA 61 | 4 | |
| 263193 | SHUNT PLUG-FIRE EXTINGUISHER CARTRIDGE | 23 | |
| 285397 | Puller Assembly, Mechanical, Plug | 1 | |
| 324477 | Shunt Plug (Shield) − Discharge Cartridge | 14 | |
| 326300 | NON-RECOIL PLUG - DISCHARGE HEAD OUTLET (ENGINE FIRE BOTTLE) | 1 | |
| 501131 | Mold – Accessory Housing Pressure Test Plug | 1 | |
| 531710 | PLUG R/H | 1 | |
| 628000 | HANDHELD BLACK LIGHT (EV6000) – P/N: 628000 - TYPE G ADAPTER - MUST HAVE AN AC PLUG, | 2 | |
| 713362 | WRENCH FOR PLUG | 1 | |
| 713957 | WRENCH FOR TORQUE THE PLUG | 1 | |
| 713960 | WRENCH FOR PLUG | 1 | |
| 726699 | PLUG TIGHTENING WRENCH | 1 | |
| 726861 | WRENCH FOR PLUG TIGHTENING IN UNIT | 1 | |
| 726865 | WRENCH FOR PLUG TIGHTENING ON UNIT | 1 | |
| 726868 | FILTER PLUG TIGHTENING WRENCH | 1 | |
| 726872 | WRENCH FOR PLUG TIGHTENING ON UNIT | 1 | |
| 747540 | SCAVENGE PRESSURE SWITCH PLUG | 1 | |
| 776964 | HELI-COIL THREAD PLUG GAUGE. | 1 | |
| 844613 | NON-RECOIL PLUG - DISCHARGE HEAD OUTLET (APU FIRE BOTTLE) | 1 | |
| 892812 | FLASHPLUG - AIR INTAKE, LEAP-1B | 1 | |
| 892815 | FLASHPLUG - AIR INTAKE, GENX-1B | 1 | |
| 895809 | PROTECTIVE PLUG - ENGINE FAN AIR EXHAUST, RR | 1 | |
| 895810 | PLUG - THRUST REVERSER, GE | 1 | |
| 895812 | FLASHPLUG - AIR FAN REVERSER, LEAP-1B | 1 | |
| 895815 | ENGINE FAN AIR EXHAUST PLUG | 1 | |
| 895820 | PLUG THRUST REVERSER EXHAUST OF PW2000 | 1 | |
| 896809 | PROTECTIVE PLUG - ENGINE EXHAUST, RR | 1 | |
| 896812 | FLASHPLUG - AIR ENGINE EXHAUST, LEAP-1B | 1 | |
| 896815 | FLASHPLUG - AIR ENGINE EXHAUST GENX-1B | 1 | |
| 999061 | PRESSURE TEST MAIN HEATER BLOCK PLUG | 1 | |
| 999095 | FROTH WAND TEST PLUG | 1 | |
| 999361 | PRESSURE TEST MAIN HEATER BLOCK PLUG | 1 | |
| 1030013 | PLUG HONEYCOMB COR | 1 | |
| 2001116 | LAVATORY COUPLER PLUG, 4-INCH | 1 | |
| 2001239 | 4-INCH AIRCRAFT LAVATORY PLUG | 1 | |
| 2007203 | PS100 - Includes: 2 metre (6.5ft) input cable (without Plug), Padded jacket and carton - Exclusions: output lead / input plug | 1 | |
| 2007205 | PS300 (3 phase). Works at: - EC1 EU Model (400VAC input, 3 phase + Neutral + E) - EC2 US Model (200VAC input, 3 phase + E) - Includes: 3 metre (10ft) input cable (without Plug), Padded jacket and carton - Exclusions: output lead / input plug | 1 | |
| 2016692 | Input - 15m (50ft) - 4C x 16sqmm - Plug: Mennekes 400V, 63 Amps, 3 phase, 5 pole, 6H, red | 1 | |
| 2016699 | Input - 30m (98.5ft) - 4C x 16sqmm - Plug: Mennekes 400V, 63 Amps, 3 phase, 5 pole, 6H, red | 1 | |
| 2017557 | Fast Charger 10A for GPU 2400 (220VAC Input only). Merit Connector + UK Input plug | 1 | |
| 2018114 | Input Extension Lead for EC1 - 30m (98.5ft) - 5C x 6sqmm - Plug and Socket: Mennekes 400V, 32 Amps, 3 phase, 5 pole, 6H, red | 1 | |
| 2018122 | Combination 300 EC1 (400V, 3-phase + N + E) - Includes: 10m (33ft) wired input lead with plug - Exclusions: output lead / shipping crate | 1 | |
| 2018197 | Combination 200 EC1 (230V, 1-phase) - Includes: 10m (33ft) wired input lead with plug - Exclusions: output lead / shipping crate | 1 | |
| 2018199 | Input Extension Lead CSC200 EC1 - 10m (33ft) - 3C x 6sqmm - Plug and Socket: Mennekes 230V, 32 Amps, 1 phase, 3 pole, 6H, blue | 1 | |
| 2018313 | Combination 200 EC2 (115V, 1-phase) - Includes: 10m (33ft) wired input lead with plug - Exclusions: output lead / shipping crate | 1 | |
| 2018314 | Combination 300 EC2 (200V, 3-phase + E) - Includes: 10m (33ft) wired input lead with plug - Exclusions: output lead / shipping crate | 1 | |
| 2018315 | Combination 300 EC3 (220V, 1-phase) - Includes: 10m (33ft) wired input lead with plug - Exclusions: output lead / shipping crate | 1 | |
| 2018407 | Output 28VDC - 10m (33ft) - 4C x 70sqmm - LPA connector. Cable with Interlock system (output will only turn on when plugged to the aircraft) | 1 | |
| 2018547 | Input Extension Lead CSC200 EC2 - 10m (33ft) - 3C x 6sqmm - Plug and Socket: Mennekes 115V, 32 Amps, 1 phase, 3 pole, 4H, yellow | 1 | |
| 2018548 | Input Extension Lead CSC300 EC1 - 10m (33ft) - 5C x 6sqmm - Plug and Socket: Mennekes 400V, 32 Amps, 3 phase, 5 pole, 6H, red | 1 | |
| 2018549 | Input Extension Lead CSC300 EC2 - 10m (33ft) - 5C x 6sqmm - Plug and Socket: Mennekes 200V, 32 Amps, 3 phase, 4 pole, 9H, blue | 1 | |
| 2018550 | Input Extension Lead CSC300 EC3 - 10m (33ft) - 3C x 10sqmm - Plug and Socket: Mennekes 220V, 63 Amps, 1 phase, 3 pole, 6H, blue | 1 | |
| 2018777 | Input* - 15m (50ft) - 4C x 6sqmm - Plug: Mennekes 400V, 32 Amps, 3 phase, 5 pole, 6H, red | 1 | |
| 2018778 | Input* - 30m (98.5ft) - 4C x 6sqmm - Plug: Mennekes 400V, 32 Amps, 3 phase, 5 pole, 6H, red | 1 | |
| 2018909 | Output 28VDC - 6m (20ft) - 4C x 70sqmm - LPA connector. Cable with Interlock system (output will only turn on when plugged to the aircraft) | 1 | |
| 2019072 | Fast Charger 10A for GPU 2400 (220VAC Input only). Merit Connector + EU Input plug | 1 | |
| 2019541 | Input - 10m (33ft) - 4C x 35sqmm - Plug: Mennekes 400V, 125 Amps, 3 phase, 5 pole, 6H, red | 1 | |
| 2020321 | Input - 10m (33ft) - 4C x 16sqmm - Plug: Mennekes 400V, 63 Amps, 3 phase, 5 pole, 6H, red | 1 | |
| 2020322 | Input - 20m (66ft) - 4C x 16sqmm - Plug: Mennekes 400V, 63 Amps, 3 phase, 5 pole, 6H, red | 1 | |
| 2020331 | Input - 10m (33ft) - 4C x 16sqmm - Plug: Mennekes 400V, 63 Amps, 3 phase, 5 pole, 6H, red | 1 | |
| 2020332 | Input - 30m (98.5ft) - 4C x 16sqmm - Plug: Mennekes 400V, 63 Amps, 3 phase, 5 pole, 6H, red | 1 | |
| 2020334 | Input extension lead, 50 metre (164ft) with 63 Amps plug and socket. Note: This is not an input lead, it is an extension for an input lead | 1 | |
| 2020335 | Coolspool 410 28V DC Battery GPU - Includes: BC80 charger. Charger works at both 115 and 230V single phase input. - Exclusions: output lead / shipping crate / input plug for BC80 charger | 1 | |
| 2020338 | BC80 input Plug: Lewden 230V, 16 Amps, 1 phase, 3 pole, 6H, blue (EU) | 1 | |
| 2020339 | BC80 input Plug: Lewden 115V, 32 Amps, 1 phase, 3 pole, 4H, yellow (USA) | 1 | |
| 2020344 | Input - 3m (10ft) - 3C x 6sqmm - Plug: Lewden 240V, 32 Amps, 1 phase, 3 pole, 6H, blue | 1 | |
| 2020345 | Input - 15m (50ft) - 3C x 6sqmm - Plug: Lewden 240V, 32 Amps, 1 phase, 3 pole, 6H, blue | 1 | |
| 2020357 | Input - 15m (50ft) - 4C x 35sqmm - Plug: Mennekes 400V, 125 Amps, 3 phase, 5 pole, 6H, red | 1 | |
| 2020358 | Input - 30m (98.5ft) - 4C x 35sqmm - Plug: Mennekes 400V, 125 Amps, 3 phase, 5 pole, 6H, red | 1 | |
| 2020404 | Input - 40m (131ft) - 4C x 35sqmm - Plug: Mennekes 400V, 125 Amps, 3 phase, 5 pole, 6H, red | 1 | |
| 2020891 | PS300 (1 phase). Works at: - EC3 (220VAC input, 1 phase + Neutral + E) - Includes: 3 metre (10ft) input cable (without Plug), Padded jacket and carton - Exclusions: output lead / input plug | 1 | |
| 2020939 | Input Lead - 2m (6.5ft) - Socket: IEC C13 - Plug: Euro (Type F - Schuko) | 1 | |
| 2020941 | Input Lead - 2m (6.5ft) - Socket: IEC C13 - Plug: Israel (Type H) | 1 | |
| 2020943 | Input Lead - 2.5m (8ft) - Socket: IEC C13 - Plug: South Africa (Type M) | 1 | |
| 2020949 | Input Extension Lead for EC1 - 20m (66ft) - 5C x 6sqmm - Plug and Socket: Mennekes 400V, 32 Amps, 3 phase, 5 pole, 6H, red | 1 | |
| 2020959 | Plug for EC1: Mennekes 400V, 32 Amps, 3 phase, 5 pole, 6H, red | 1 | |
| 2020960 | Plug for EC2: Mennekes 230V, 32 Amps, 3 phase, 4 pole, 9H, blue | 1 | |
| 2020961 | Plug for EC3: Mennekes 220V, 63 Amps, 1 phase, 3 pole, 6H, blue | 1 | |
| 2020962 | Plug: Mennekes 115V, 16 Amps, 1 phase, 3 pole, 4H, yellow | 1 | |
| 2020963 | Plug: Mennekes 230V, 16 Amps, 1 phase, 3 pole, 6H, blue | 1 | |
| 2021537 | Combination 300 EC3 2450PA (220V, 1-phase). This unit replaces the GPU 2400/315 - Includes: 10m (33ft) wired input lead with plug - Exclusions: output lead / shipping crate | 1 | |
| 2022422 | Input Lead - 2m (6.5ft) - Socket: IEC C19 - Plug: EU (Type F - Schuko) | 1 | |
| 02120036 | 4600.16-.5/8-3/8" SPARK PLUG SOCKET, BI-HEX | 1 | |
| 02130018 | 4606.18-11/16-3/8" SPARK PLUG SOCKET,-HEX | 1 | |
| 02140036 | 3466.16-.5/8-3/8" SPARK PLUG SOCKET, HEXAGO | 1 | |
| 2700045 | SHORTING PLUG | 1 | |
| 4054121 | SQ. HEAD MAGNETIC PLUG 3/4NPT | 1 | |
| 5100857 | Exhaust Plug, APU | 1 | |
| 5101236 | COVER, EXHAUST PLUGS | 3 | |
| 5101504 | ENGINE EXHAUST PLUG | 2 | |
| 6723118 | NO GIO THREAD PLUG GAGE | 1 | |
| 6796168 | PLUG - TURB SHAFT | 1 | |
| 6796183 | DRIFT - PROPELLER SHAFT PLUG REMOVAL | 1 | |
| 6796184 | PROP SHAFT PLUG DRIFT | 1 | |
| 6796208 | PLUG ACCESSORY MAIN DRIVE SHAFT | 1 | |
| 6796209 | PLUG ACCESSORY DRIVE SHAFT SIDE GEAR | 1 | |
| 6796240 | PULLER - EXTENSION SHAFT OIL PLUG | 1 | |
| 6796254 | PLUG - ACCESSORIES MAIN DRIVE SHAFT GEAR INSTALLATION | 1 | |
| 6796313 | PLUG - TORQUEMETER INNER SHAFT | 1 | |
| 6796467 | PULLER, PROP SHAFT PLUG | 4 | |
| 6797109 | PLUG - TURB SHAFT | 1 | |
| 6797117 | DRIFT - PROPELLER SHAFT PLUG | 1 | |
| 6797137 | PLUG - ACCY MAIN DRIVE SHAFT | 1 | |
| 6797281 | PULLER PROPELLER SHAFT PLUG | 1 | |
| 6797564 | GAGE - PLUG, PINION GEAR BUSHING | 2 | |
| 6798048 | GAGE--PLUG, PRESSURE OIL PUMP BUSHIN | 1 | |
| 6798049 | GAGE--PLUG, SCAVENGE OIL PUMP BUSHING | 1 | |
| 6799863 | JIG - DRILL AND DRIVER, DRAIN PLUG INSERT LOCKPIN HOLE | 1 | |
| 6800372 | MID BEARING SHIPPING PLUG | 1 | |
| 6874005 | HOLDING FIXTURE, CHECK VALVE PLUG | 1 | |
| 6877006 | HOLDING FIXTURE CHECK VALVE PLUG | 1 | |
| 6897105 | SEAL PLUG CHECK VALVE | 1 | |
| 6897885 | PLUG-ALIGNMENT CHECK, FRT SUPPORT BEARING HSG BORE | 2 | |
| 6898260 | PLUG - ALIGNMENT CHECK | 2 | |
| 6898261 | PLUG, ALIGNMENT CHECK FRT. SUPPORT BEARING HOUSING | 2 | |
| 6898418 | JIG--DRILL, MAGNETIC PLUG INSERT DRILLS THE PIN HOLE IN THE MAG DRAIN PLUG AND GEARBOX CASE. | 1 | |
| 21008311 | PLUG SHUNT FIRE | 11 | |
| 23053696 | Puller – Shaft Plug, Fan Rotor Assembly | 2 | |
| 23053699 | PULLER,T HANDLE BORESCOPE PLUG | 6 | |
| 23054813 | Plug – Puller Plate, Fan Shaft | 2 | |
| 23063540 | Puller – Knocker, Vane Plug With Bypass | 2 | |
| 26526000 | TOOL FOR LEAK TEST OF THERMAL RELIEF PLUGS AND THE OVERINFLATION PLUG | 1 | |
| 30840002 | SHUNT PLUG APU | 7 | |
| 31001615 | PLUG SHUNT - FIRE EXTINGUISHER CARTRIDGE, HTL | 3 | |
| 37489001 | FUEL FILLER PLUG WITH KEY | 1 | |
| 74160001 | 12375/1-SPARK PLUG BRUSH | 1 | |
| 81266102 | PLUG CHARGING FIXTURE | 1 | |
| 0249937860 | HOUSING ASSY,MAGN.PLUG | 1 | |
| 0292697590 | HARNESS,MAGNETIC PLUG | 1 | |
| 0298117120 | MAGNETIC PLUG HOLDER | 1 | |
| 0298727620 | MAGNETIC PLUG HOLDER | 1 | |
| 0319727300 | MAGNETIC PLUG HOLDER | 1 | |
| 0319727700 | HOLDER,MAGNETIC PLUG | 1 | |
| 0390110020 | PLUG,BREATHER | 1 | |
| 460005835 | (PLUG SHUNT) PLUG SHUNT | 45 | |
| 460006433 | SHORTING PLUG | 2 | |
| 460006434 | SHORTING PLUG | 1 | |
| 460006564 | SHORTING PLUG | 1 | |
| 460007133 | WRENCH PLUG | 1 | |
| 537100162 | HYDRAULIC SYSTEM PLUG KIT | 1 | |
| 537100528 | PLUG SET, HYDRAULICS | 1 | |
| 537100529 | PLUGS HYDRAULIC | 1 | |
| 0620720290 | MECHANICAL MAGNETIC PLUG | 1 | |
| 0620720320 | MECHANICAL MAGNETIC PLUG | 1 | |
| 1113407198 | PLUG. THREADED | 1 | |
| 1473747500 | PLUG GAUGE HELICOIL THREADS UNF 1/4" -28 PITCH 0.91 CLASS 2B (BOELLHOFF REF.) | 1 | |
| 4600067133 | WRENCH PLUG | 1 | |
| 100057429110 | HOUSING WITH PLUG | 1 | |
| 91-7005 | (IG 01) PLUG MACHINED | 2 | |
| 9171K253 | HEX-HEAD PLUG SOLID PIPE SIZE;A-3/8 HEX KEY;5/16" MAX PSI;4000 | 1 | |
| 9171K45 | HEX-HEAD PLUG | 1 | |
| 9171K48 | HEX-HEAD PLUG | 1 | |
| 9171K49 | HEX-HEAD PLUG | 1 | |
| 9299M96G06 | PLUG, BORESCOPE, HPT STG 1 | 1 | |
| 929A028-1 | CHECKING PLUG | 1 | |
| 93181-000 | PLUG ASSY JIG BALL THRUST ASSY,DETAILS | 1 | |
| 9441M29 | PLUG, PUSHER GEAR SHAFT | 1 | |
| 9441M29 REV D | PLUG, PUSHER GEAR SHAFT | 1 | |
| 94991-173 | PATCH PLUG | 1 | |
| 94991-175 | PATCH PLUG | 1 | |
| 9560132100 | MAGNETIC PLUG,MECHANICAL | 1 | |
| 9560168100 | MAGNETIC PLUG,MECHANICAL | 1 | |
| 9560171170 | MAGNETIC PLUG,MECHANICAL | 2 | |
| 9560171180 | MAGNETIC PLUG,MECHANICAL | 1 | |
| 9561490090 | PLUG, U2 THREADED | 1 | |
| 9565K26 | TUBE FINISHING PLUG 1"1/2 SQUARE | 1 | |
| 956A1238G01 | IGNITER PLUG DEPTH GAUGE | 5 | |
| 956A1290 | TEST CELL PLUG-HPT DETERIORATION PIN NOT SET - BOOSTER 1 | 1 | |
| 956A3290 | TEST CELL PLUG-HPT DETERIORATION PIN NOT SET - BOOSTER 2 | 1 | |
| 956A6453 | SHUTTER - DUMMY - LPT BOROSCOPIC PLUG | 1 | |
| 9599-607-15904 | BENCH WITH PLUG IN MODULE | 1 | |
| 964C731-1 | CHECKING PLUG | 1 | |
| 9686M80P01 | PLUG, BORESCOPE, THREADED | 1 | |
| 9786101001 | THREADED PLUG | 1 | |
| 9786121001 | THREADED PLUG | 1 | |
| 9786121039 | THREADED PLUG | 1 | |
| 9786181501 | THREADED PLUG | 1 | |
| 9786510100 | PLUG,THREADED | 1 | |
| 9786512100 | PLUG,THREADED | 1 | |
| 97A21102505000 | Plug check valve APU sys | 4 | |
| 97A28002019000 | BLANKING PLUG ASSEMBLY - THERMAL RELIEF VALVES | 1 | |
| 9897060031 | PLUG, THREADED | 1 | |
| 98A10007534000 | PLUG - APU EXHAUST | 3 | |
| 98A10007608000 | PLUG - APU EXHAUST DUCT | 4 | |
| 98A10009001000 | PLUG, APU EXHAUST | 1 | |
| 98A10009008000 | PLUG, APU EXHAUST DUCT | 1 | |
| 98D10103001000 | FLASH PLUG | 1 | |
| 98D10103002000 | EXHAUST FLASHPLUG LEAP | 1 | |
| 98D10103500042 | Static pressure hole plugging | 13 | |
| 98D10103500043 | Static pressure hole plugging | 13 | |
| 98D26203002044 | PLUG Ø15.9 FLAT ((THE TOOL IS USED ON A320 A/C. IT IS THE ACCESSORY OF P/N:98D26203002004)) | 7 | |
| 98D26203002062 | PLUG, ENGINE FIRE EXTINGUISHER SYSTEM TEST TOOL | 3 | |
| 98D26203002064 | PLUG, ENGINE FIRE EXTINGUISHER SYSTEM TEST TOOL | 3 | |
| 98D3210300100 | NLG FLASHPLUG KIT | 1 | |
| 98D32103001000 | NLG FLASHPLUG KIT | 2 | |
| 98D32103002000 | MLG LH - MLG FLASHPLUG KIT | 2 | |
| 98D32103003000 | RH - MLG FLASHPLUG KIT | 2 | |
| 98D52703000000 | CONNECTOR SHUNT(SHUNT PLUG TOOL) | 18 | |
| 98DETTPSH0AI00 | AIRBUS HOLDER FOR VENT PLUGS | 1 | |
| 98F10008232000 | PLUG-APU EXHAUST DUCT | 13 | |
| 98F10008232000 | PLUG-APU EXHAUST DUCT (NP) | 13 | |
| 98F10008232001 | PLUG-APU EXHAUST DUCT | 1 | |
| 98F10009002000 | PLUG - APU EXHAUST DUCT | 8 | |
| 98F27003000000 | PLUG - APU EXHAUST | 18 | |
| 98F27003001000 | ELECTRIC PLUG WRENCH | 18 | |
| 98F55109005027 | PLUG THREADED | 1 | |
| 98F57004000210 | PLUG THREAD | 1 | |
| 98L10109001000 | PLUG-EXHAUST DUCT, APU | 2 | |
| 98L36103002054 | PLUG, HYDRAULIC PRESSURE - ENGINE BLEED TEST SET | 5 | |
| 98L54503007000 | KIT BOUCHON RR/EA BLANK PLUG KIT | 2 | |
| 98L54503007001 | KIT BOUCHON RR/EA BLANK PLUG KIT | 3 | |
| 98S10005002000 | INLET PLUGS (LH & RH) | 1 | |
| 98S10005003000 | OUTLET PLUGS (LH & RH) | 1 | |
| 98S27008231000 | PITCH UNPLUG RESET TOOL | 13 | |
| 98S71005001203 | DRAIN PLUG - WRENCH | 1 | |
| 98V10109001000 | PLUG APU EXHST DUCT | 8 | |
| 98V10109001000 | PLUG-APU EXHAUST DUCT | 8 | |
| 991-4-14607-003 | Plug,Bleeder,Screw Thread, | 1 | |
| 999-3001-12GSE | THRUST REVERSER PLUG | 1 | |
| 999-4100-5GSE | PLUG, A220 ENGINE EXHAUST | 1 | |
| 9C1022G01 | Immersion Depth - Igniter Plug Gage | 1 | |
| 9XB285027-0 | NON-RECOIL PLUG - DISCHARGE HEAD OUTLET (ENGINE FIRE BOTTLE) | 1 | |
| A-60-2600 | HYDRAULIC PLUG MACHINE WITH "CNC" NUMERIC CONTROL | 1 | |
| A10-200 | BYPASS/EXHAUST PLUGS (folding type) (set of 2) | 1 | |
| A10-201 | EXHAUST PLUGS (set of 2) | 1 | |
| A10-510 | APU INLET/EXHAUST PLUGS (set of 4) | 1 | |
| A138 | CHARGE PLUG | 1 | |
| A139-125 | EXHAUST PLUGS (set of 2) | 1 | |
| A26001-123 | SHORTING PLUG ASSY | 1 | |
| A26001-130 | ASSY PLUG SHORTING TO ISSUE L. | 1 | |
| A26001-141 | SHORTING PLUG ASSY | 1 | |
| A26001-147 | SHORTING PLUG ASSY | 1 | |
| A26001-29 | SHORTING PLUG FIRE EXT SYST TOOL | 1 | |
| A26001-30 | ASSY, SHORTING PLUG | 1 | |
| A26001-31 | ASSY, SHORTING PLUG | 1 | |
| A26001-32 | SHORTING PLUG FIRE EXT SYST TOOL | 1 | |
| A26001-33 | SHORTING PLUG FIRE EXT SYST TOOL | 1 | |
| A26004 | PLUG-EQPT-DISCHARGE NOZZLE,CARGO COMPT FIRE EXTINGUISHER | 1 | |
| A26004-1 | PLUG EQUIPMENT - DISCHARGE NOZZLE, CARGO COMPARTMENT FIRE EXTINGUISHER | 5 | |
| A26004-2 | Plug, Discharge Nozzle (3) | 2 | |
| A26007 | PLUG-EQPT-DISCHARGE NOZZLE,CARGO COMPT FIRE EXTINGUISHER | 1 | |
| A26007-1 | PLUG EQUIPMENT - DISCHARGE NOZZLE, CARGO COMPARTMENT FIRE EXTINGUISHER | 7 | |
| A26007-2 | PLUG EQUIPMENT - DISCHARGE NOZZLE, CARGO COMPARTMENT FIRE EXTINGUISHER | 3 | |
| A300-200 | EXHAUST PLUGS (set of 2) | 1 | |
| A30002 | PLUG EQUIPMENT THERMAL ANTI ICING DUCT PRESSURE SWITCH TEST | 1 | |
| A30002-1 | PLUG EQUIPMENT - THERMAL ANTI-ICING DUCT, WING PRESSURE SWITCH TEST | 5 | |
| A319-200 | BYPASS & EXHAUST PLUGS, CFM-56 Engines (set of 6) | 1 | |
| A319-205 | EXHAUST NOZZLE PLUG, IAE V2500 engine, equivalent to IAE P/N: IAE1N20008 (each) | 1 | |
| A320-200 | BYPASS & EXHAUST PLUGS, CFM-56 Engines (set of 8) | 1 | |
| A320-205 | EXHAUST NOZZLE PLUG, each, IAE V2500 engine, equivalent to IAE P/N: IAE1N20008 | 1 | |
| A320-210 | EXHAUST NOZZLE PLUGS, IAE V2500 engine (set of 2) | 1 | |
| A320-251 | BYPASS VENT PLUGS, CFM-56, equiv. OEM P/N: HIX6002, HIX6003 (set of 4) | 19 | |
| A320-252 | EXHAUST PLUGS w/ nozzle cover, CFM-56, equiv. OEM P/N: RSE1132 (set of 2) | 1 | |
| A320-255 | BYPASS & EXHAUST PLUGS, Neo LEAP-1A Engine (set of 10) | 1 | |
| A320-256 | BYPASS & EXHAUST PLUGS, PW1100G Engine (set of 10) | 1 | |
| A320-260 | APU EXHAUST PLUG | 1 | |
| A320-801 | STORAGE BAGS, Bypass & Exhaust plugs for Neo LEAP-1A Engines (set of 2) | 21 | |
| A32001-1 | BRAKE DISCONNECT PLUG (FLT DISPATCH) | 1 | |
| A32081-1 | PLUG - BUSHING INSTALLATION, MAIN LANDING GEAR (MLG) BOGIE | 1 | |
| A321-200 | BYPASS & EXHAUST PLUGS, CFM-56 Engines (set of 6) | 1 | |
| A321-205 | EXHAUST PLUGS, IAE V2500 Engines (set of 2) | 1 | |
| A330-200 | EXHAUST PLUGS, folding type (set of 2) | 1 | |
| A330-215 | BYPASS VENT, TURBINE EXHAUST, & EXHAUST NOZZLE PLUGS, GE CF6 (set of 6) | 1 | |
| A330-260 | APU EXHAUST PLUG | 1 | |
| A340-200 | EXHAUST PLUGS, RR Trent 500 series engines (set of 4) | 1 | |
| A340-201 | EXHAUST PLUGS, CFM56-5C engines (set of 4) | 1 | |
| A340-202 | EXHAUST NOZZLE PLUGS, RR Trent 500 series engines (set of 4) | 1 | |
| A340-205 | BYPASS VENT, TURBINE EXHAUST, EXHAUST NOZZLE PLUGS, RR Trent 500 engine (set of 16) | 1 | |
| A340-260 | APU EXHAUST PLUG | 1 | |
| A350-131 | EXHAUST PLUG (specify model) | 1 | |
| A355-210 | ENGINE EXHAUST PLUGS (N model) (set of 2) | 1 | |
| A36003-173 | PLUG SET-PNEUMATIC DUCTS HYDRO | 1 | |
| A36003-177 | PLUG SET - PNEUMATIC DUCTS HYDROSTATIC PRESSURE TEST | 1 | |
| A36003-178 | PLUG SET - PNEUMATIC DUCTS, HYDROSTATIC PRESSURE TEST | 1 | |
| A36003-179 | PLUG SET - PNEUMATIC DUCTS, HYDROSTATIC PRESSURE TEST | 1 | |
| A36252 | TOOL PLUG USED TO CLOSE THE T.P.I.S PORT | 1 | |
| A380-260 | APU EXHAUST PLUG | 1 | |
| A38001-22 | PLUGS - VENT, VACUUM WASTE SYSTEM (THE BOEING COMPANY) | 22 | |
| A38007-1 | PLUG - VACUUM WASTE SYSTEM (THE BOEING COMPANY) | 11 | |
| A38007-9 | PLUG - VACUUM WASTE SYSTEM (THE BOEING COMPANY) | 12 | |
| A38012-14 | FLUSH PLUG ADAPTER | 1 | |
| A38012-27 | FLUSH PLUG ADAPTER | 1 | |
| A38012-6 | FLUSH PLUG | 2 | |
| A4-200 | EXHAUST PLUG | 1 | |
| A46318 | BOUCHON PLUG | 1 | |
| A78019-56 | Hex Plug | 1 | |
| A99-14CRG | DAVID CLARK (DC) CLAA99- 14CRG 4-BAY BATTERY CHARGER FOR 9900/9100 SYSTEM BATTERIES. THE 4- BAY BATTERY CHARGER (CLAA99- 14CRG) REQUIRES A STANDARD 110V CORD WITH A THREE-PRONG PLUG FOR CHARGING | 1 | |
| AA5-100 | ENGINE INLET PLUGS, Cheetah or Tiger models (set of 2) | 1 | |
| AA5-105 | CARB. AIR or OIL COOLER INLET PLUG (each, specify model and year) | 1 | |
| AB-049 | SHUNT PLUG-FIRE EXT CARTRIDGE, HT (A320/A330) | 1 | |
| AB26001-SL5 | SET OF SHUNT PLUGS | 1 | |
| AB26001-T5I | PLUG,SHUNT (**ON A/C 101-200) | 1 | |
| ABNC-MCX-6 | Coaxial Cable, BNC to MCX plug (male contact), RG174 low noise, 6 foot long, 50 ohm. Includes Certificate of Conformance. | 1 | |
| ABNC-MCX6-R | Coaxial Cable, BNC to MCX 90° degree (right angle) plug (male contact), RG174 low noise, 6 foot, 50 ohm . Includes Certificate of Conformance. | 1 | |
| AC21869000 | TOOL FOR A LEAK TEST OF THERMAL RELIEF PLUGS AND THE OVERINFLATION PLUG INSTALLATION | 8 | |
| AC21884010 | TOOL FOR A LEAK TEST OF THERMAL RELIEF PLUGS AND OVERINFLATION PLUG | 3 | |
| AC21884010-1 | LEAK TEST TOOL FOR THE THERMAL RELIEF PLUGS AND THE OVERINFLATION PLUG. (VFAJX6) | 2 | |
| AC2189000 | TOOL FOR ALEAK TEST OF THE OVER INFLATION PLUG | 1 | |
| AC21890000 | TOOL FOR A LEAK TEST OF THE OVERINFLATION PLUG | 4 | |
| AC21890000/ | TOOL FOR A LEAK TEST OF THE OVERINFLATION PLUG | 4 | |
| AC500-104 | EXHAUST PLUGS (500 Series) (set of 4) | 1 | |
| AC500-105 | EXHAUST PLUGS (520 and 560 models) (set of 4) | 1 | |
| AC680-102 | EXHAUST PLUGS (turboprop engines) (set of 2) | 1 | |
| AC690-105 | ENGINE INLET PLUGS, turbine engines w/NACA Plugs in bright work, tethered to main plug set (set of 4) | 1 | |
| AC690-110 | EXHAUST PLUGS (set of 2) | 1 | |
| AC690-112 | EXHAUST PLUGS, -10 engine conversion (set of 2) | 1 | |
| AC935 | AC935;MAP-Series OPM adaptor HMFOC plug OptiTip locking | 1 | |
| ACE E8126SR | ACE E8126SR;ACE E8126SR Short Range 34/32DB 1310/1550nm OTDR Plug-In | 1 | |
| ACS87001 | PLUG, ENGINE INTAKE AND EXHAUST | 3 | |
| ACS87017 | (Blank) Plug − Air Inlet and Exhaust (long term) | 2 | |
| AD-000123 | AD-000123;Cigar Plug Battery Charger | 1 | |
| AD5-110 | FORWARD ENGINE EXHAUST PLUGS (set of 2) | 1 | |
| AD5-160 | AFT ENGINE EXHAUST PLUGS (set of 3) | 1 | |
| ADTS552F-EO-SCAS-SR-EALT | AIR DATA TEST SET (ADTS)ADTS552F-EALT-EO-SCAS-SRNO EPR, WIRELESS ENABLED,EUPOWER PLUG; AIR DATA TEST SET (BAKER HUGHES/ GE DRUCK) | 1 | |
| AEM447 | HAR DAV WHEEL BEARING PLUG KIT | 1 | |
| AF-5127-EXT | PROBE EXTENSION HANDLE, MALE 4 PIN FISCHER PLUG TO TRIAX FISCHER, 8" LONG Includes Test Report and Certificate of Conformance | 1 | |
| AFNDT-3413 | Custom Boeing Eddy Current Hole Standard. Hole Sizes: .159 & .190"Ø. With one of each hole size plugged. Material: 2024-T3 Aluminum. Plugged holes contain a BACR15BA6A8C Rivet in the .056" plate. Apply BMS 545 sealant between each layer Includes Test Repo | 1 | |
| AGE-03951-401 | PLUG LEAKAGE (APPLICABLE WHEN REAR FAIRING IS INSTALLED) | 2 | |
| AGE-04260-405 | PLUG KIT - REAR FUEL TANK (01 INSTALL IN THE VENT OUTLET IN PLACE OF FLAME ARRESTOR) | 2 | |
| AGE-04748-401 | PLUG LEAKAGE TEST ASSY-SHROUD APU | 3 | |
| AGE-04748-405 | PLUG LEAKAGE TEST ASSY-SHROUD APU | 1 | |
| AGE-05118-401 | Phenom Static Protection Plug | 5 | |
| AGE11030 | STATOR HOUSING PORT PLUG | 1 | |
| AGE15825 | PLUG, SHIM | 1 | |
| AGR-700 | SWASH PLATE PLUG | 1 | |
| AH120-100 | ENGINE PLUGS (left & right engine deck, oil cooler plugs) (set of 3) | 1 | |
| AH120-102 | EXHAUST PLUG | 1 | |
| AH120-103 | PARTICLE SEPARATOR EXHAUST PORT PLUG | 1 | |
| AH130-125 | EXHAUST PLUG | 1 | |
| AH135-125 | EXHAUST PLUGS, T series, Arrius Engine (set of 2) | 1 | |
| AH135-126 | EXHAUST PLUGS, P series, P&W Engine (set of 2) | 1 | |
| AH135-506 | FRESH AIR VENT PLUG | 1 | |
| AH145-125 | EXHAUST PLUGS (set of 2) | 1 | |
| AH72-125 | EXHAUST PLUGS (set of 2) | 1 | |
| AH72-130 | FRESH AIR INLET PLUGS, on belly of nose (set of 2) | 1 | |
| ALE3823981 | WRENCH SPARK PLUG ADAPTOR | 1 | |
| AN-GA8642-737-016 | EXHAUST DUCT PLUG | 1 | |
| AN16-B1-R | ADAPTOR - REFLECTION 16 PIN PLUG (NORTEC 500/600 INTRUMENT) TO B1 ELOTEST 8 PIN FISCHER RECEPTACTLE (GE/HOCKING INTRUMENT) Includes Test Report and Certificate of Conformance | 1 | |
| AN16-P2D-B | ADAPTOR - BRIDGE CONNECTION, 16 PIN PLUG (NORTEC 500/600, 2000 SERIES INTRUMENTS TO 12 PIN LEMO RECEPTACTLE FOR GE/HOCKING INTRUMENTS Includes Certificate of Conformance | 1 | |
| AN814-8 | PLUG: WITH O-RING | 1 | |
| AN933-1D | 1/8 INCH NPT PLUG | 1 | |
| AO121779 | EXTRACTOR PUNCH FOR FUSIBLE PLUGS | 2 | |
| AP20468 | EATON CROUSE-HINDS SERIES ARKTITE AP PLUG | 1 | |
| APA-107 | EXHAUST PLUGS (set of 2) | 1 | |
| APV7877-00-0 | SOCKET,EXHAUST AFT PLUGG | 2 | |
| APWR-700 | SWASH PLATE PLUG (use with APWR-200: ROTOR HUB COVER) | 1 | |
| AQC-N1418110 | TORQUE WRENCH WITH PLUG FOR REPLACEABLE NOZZLES (20 - 110 NM) | 1 | |
| AS3588-04+ | Expansion plug _ short | 1 | |
| AS4862 D 03 | PLUG - SCREW THREAD | 1 | |
| AS5168-06 | PLUG - FLARED TUBE - FUEL SHROUD TEST | 1 | |
| AS5168R06 | PLUG FLARED TUBE - FUEL SHROUD TEST | 1 | |
| AS5169J03L | STAINLESS STEEL DRILLED HEAD PLUG, MACHINE THREAD | 1 | |
| AS5231J10 | PLUG - HYDRAULIC PRESSURE TUBE, 5/8 INCH LINE, CORROSION RESISTANT STEEL | 1 | |
| AS5231W08 | PLUG - HYDRAULIC RETURN TUBE, 1/2 INCH LINE, ALUMINUM | 1 | |
| ASI-200-3 | ASI-2000PLUGINFORVHF-21,VHF-22 | 1 | |
| ASPS78 | AVIATION SPARK PLUG SOCKET 7/8 INCH | 1 | |
| AT1020 | INSERTION TOOL 16 GAGE DEUTSCH ENGINE INSTALLATION PLUGS. | 2 | |
| AT69-35663-1001 | Input Cavity Plug Torque Wrench Adapter | 1 | |
| AT69-35663-1001PM | INPUT CAVITY PLUG TORQUE WRENCH ADAPTER - REMOVING AND INSTALLING INPUT CAVITY PLUG AT69-35663-1001 | 1 | |
| ATB1067 | INSERTION TOOL 20 GAGE FEMALE ROUND CANNON PLUG (WITHOUT SPRING LOCKS). | 3 | |
| ATBX1073 | INSERTION TOOL 20 GAGE DEUTSCH ENGINE INSTALLATION PLUGS. | 3 | |
| ATI508KG | CANNON PLUG WITH GRIPS | 2 | |
| ATI509RP8 | CANNON PLUG PLIER STRAIGHT | 1 | |
| ATR-106 | EXHAUST PLUGS (set of 2) | 1 | |
| ATS950 | Magnetic spark plug socket, Champion and Tempest plugs | 3 | |
| AVI25624-001 | VENT PLUG WRENCH | 1 | |
| AVTB73MAPU | APU EXHAUST PLUG, 737MAX | 2 | |
| AVTB73MCFM56EPS | Aviatema B737 Max Engine Exhaust Plug Set | 1 | |
| AVTB73MLEA1BEP | Aviatema Engine Exhaust Plug B737MAX | 1 | |
| AVTB73MLEA1BEPS | ENGINE EXHAUST PLUG SET, LEAP-1B | 1 | |
| AVTB73MLEA1BSEP | Aviatema Engine Small Exhaust Plug B737MAX | 1 | |
| AVTB73NCFM56EP | Aviatema Engine Exhaust Plug B737NG | 1 | |
| AVTB73NCFM56EPS | Aviatema B737NG Engine Exhaust Plug Set | 1 | |
| AVTB73NCFM56SEP | Aviatema Engine Small Exhaust Plug B737NG | 1 | |
| AVTB73NCFM5EEP | Aviatema Engine Exhaust Plug B737NG, CFM-7BE Engine | 1 | |
| AVTB747GECF6 | Aviatema B747 GECF6 Engine Exhaust Plug | 1 | |
| AVTB747GENX2EP | Aviatema B747 GENX2 Engine Exhaust Plug | 1 | |
| AVTB747GENX2SEP | Aviatema B747 GENX2 SM Engine Exhaust Plug | 1 | |
| AVTB757RB211EP | Aviatema B757 RB211 Engine Exhaust Plug | 1 | |
| AVTB767GECF6EP | Aviatema B767 GE CF6 Engine Exhaust Plug | 1 | |
| AVTB767PW400EP | Aviatema B767 Pw4000 Engine Exhaust Plug | 1 | |
| AVTB777GE90EP | PLUG: ENGINE EXHAUST,PW4000, B777 | 1 | |
| AVTB777GE90SEP | PLUG: ENGINE EXHAUST,SM,PW4000, B777 | 1 | |
| AVTB777PW400EPS | PLUG: ENGINE EXHAUST,PW4000, B777 | 1 | |
| AVTB777TR800EP | PLUG: EXHAUST,TR800 ENGINE, B777 | 1 | |
| AVTB77XGE9XEP | Aviatema B777X GE9X Engine Exhaust Plug | 1 | |
| AVTB77XGE9XSEP | Aviatema B777X GE9X Engine SM Exhaust Plug | 1 | |
| AVTB787GENX1EP | Aviatema B787 GENX1 Engine Exhaust Plug | 1 | |
| AVTB787GENX1SEP | Aviatema B787 GENX1 Engine SM Exhaust Plug | 1 | |
| AVTB787GENXBPS | PROTECTIVE PLUG - ENGINE FAN AIR EXHAUST, GE | 1 | |
| AVTB787GENXEPS | PROTECTIVE PLUG - ENGINE EXHAUST, GE | 1 | |
| AVTB787TR100EP | Aviatema B787 TR100 Engine Exhaust Plug | 1 | |
| AZ421 | KODAK PIXPRO DIGITAL CAMERA, Li-Ion Battery 4 GB SD CARD / inside of Camera, USB Battery Charger Data Sync Cable Cord, AC Adapter Power Plug | 1 | |
| B-14/28-50 | 11-18260 DB ASSEMBLY B-14/28-50E APU/CHARGER EUROPEAN WITH CESSNA PLUG | 1 | |
| B100-110 | HEAT EXCHANGER INLET PLUGS (at wing root) (set of 2) | 1 | |
| B100-122 | EXHAUST PLUGS (set of 4) | 1 | |
| B100-123 | EXHAUST PLUGS (Garret Engines) (set of 2) | 1 | |
| B117-125 | ECU EXHAUST PLUG (3.8" dia) | 1 | |
| B18-116 | EXHAUST PLUGS (E & H models) (set of 12) | 1 | |
| B18-117 | HEATER INLET DUCT PLUG | 1 | |
| B18-119 | EXHAUST PLUGS (P&W 985, specify size) (set of 2) | 1 | |
| B19415-1 | PLUG AND QUICK DISCON- NECT COUPLER AND HOSE ASSEMBLY | 1 | |
| B1B-101 | INTAKE PLUG, (EACH) | 1 | |
| B1B-200 | EXHAUST PLUGS (set of 4) | 1 | |
| B1B-201 | EXHAUST PLUG (EACH) | 1 | |
| B200-110 | HEAT EXCHANGER INLET PLUGS (at wing root) (set of 2) | 1 | |
| B200-130 | EXHAUST PLUGS (set of 4) | 1 | |
| B200-131 | EXHAUST STACK BASE VENT PLUGS (attaches to Exhaust Cover) (set of 4) | 1 | |
| B300-110 | HEAT EXCHANGER INLET PLUGS (set of 2) | 1 | |
| B300-115 | ENGINE COWLING VENT PLUGS (on right side of engine nacelle) (set of 2) | 1 | |
| B300-130 | EXHAUST PLUGS (set of 4) | 1 | |
| B35-100 | ENGINE INLET PLUGS (260 HP) SMALL BONANZA (set of 2) | 1 | |
| B35-105 | ENGINE INLET PLUGS (285HP-300HP) LARGE BONANZA, not for "hot prop" (set of 2) | 1 | |
| B35-107 | ENGINE INLET PLUGS (285HP-300HP) LARGE BONANZA, with "hot prop" (set of 2) | 1 | |
| B35-108 | FRESH AIR INLET/EXHAUST PLUGS (NOT FOR V35 MODELS) (set of 2) | 1 | |
| B35-112 | EXHAUST PLUGS (set of 2) | 1 | |
| B35-114 | FRESH AIR EXHAUST PLUG (for V35 or G36 Models) | 1 | |
| B350-100 | ENGINE/OIL COOLER INLET PLUGS (OEM ship set item "B") (set of 4) | 1 | |
| B350-110 | HEAT EXCHANGER INLET PLUGS (OEM ship set item "C") (set of 2) | 1 | |
| B350-130 | EXHAUST PLUGS (set of 4) | 1 | |
| B350-131 | EXHAUST STACK BASE VENT/GAP PLUGS (attaches to Exhaust Cover) (set of 4) | 1 | |
| B350-132 | ENGINE COWLING VENT PLUGS (on right side of engine nacelle) (OEM ship set item "D") (set of 2) | 1 | |
| B350-147 | PROP TIE-DOWNS/EXHAUST COVERS, EXHAUST BASE VENT PLUGS (OEM ship set item "A") (set of 10) | 1 | |
| B350-151 | PROP TIE-DOWNS/EXHAUST COVERS, EXHAUST BASE VENT PLUGS, winterized materials (set of 10) | 1 | |
| B36-100 | ENGINE INLET PLUGS (G36 Models "NO HOT PROP") (set of 2) | 1 | |
| B36-105 | ENGINE INLET PLUGS (285HP-300HP) LARGE BONANZA, not for "hot prop" (set of 2) | 1 | |
| B36-106 | ENGINE INLET PLUGS (36 Models with "HOT PROP") (set of 2) | 1 | |
| B36-108 | FRESH AIR INLET/EXHAUST PLUGS (set of 2) | 1 | |
| B36-112 | EXHAUST PLUGS (set of 2) | 1 | |
| B36-114 | SIDE COWLING INLET SCOOP PLUG (TC Models, no mesh) | 1 | |
| B50-105 | AUGMENTER EXHAUST TUBE PLUGS (set of 4) | 1 | |
| B54001-44 | Hex Plug | 1 | |
| B55-110 | HEATER INLET PLUGS (ON NOSE) (set of 2) | 1 | |
| B55-111 | HEATER INLET PLUG (ON NOSE) | 1 | |
| B55-112 | HEATER INLET PLUG (HORIZONTAL UNDER NOSE) | 1 | |
| B55-115 | CABIN AIR INLET & EXH PLUGS (set of 2) | 1 | |
| B58-101 | ENGINE INLET PLUGS, with A/C (set of 4) | 1 | |
| B58-102 | ENGINE INLET PLUGS, with A/C (G58 Models) (set of 4) | 1 | |
| B58-108 | FRESH AIR INLET PLUG (on dorsal) | 1 | |
| B58-110 | HEATER INLET PLUG (on nose) | 1 | |
| B58-111 | HEATER INLET PLUGS (on nose) (set of 2) | 1 | |
| B58-114 | FRESH AIR EXHAUST PLUG (for G58 Models) | 1 | |
| B58-115 | FRESH AIR INLET/EXHAUST PLUGS (set of 2) | 1 | |
| B60-103 | HEAT EXCHANGER PLUGS (set of 2) | 1 | |
| B60-107 | EXHAUST PLUGS, standard engine (set of 2) | 1 | |
| B60-109 | TURBO WASTE GATE EXHAUST PLUGS (set of 2) | 1 | |
| B707-220 | BYPASS VENT & TURBINE EXHAUST PLUGS, TF-33 engines (set of 12) | 1 | |
| B707-235 | EXHAUST PLUGS (set of 4) | 1 | |
| B717-110 | ENGINE INLET PLUGS, screen mesh center, small JT8-D (set of 2) | 1 | |
| B717-120 | ENGINE EXHAUST PLUGS, folding type, small JT8-D (set of 2) | 1 | |
| B717-150 | ENGINE INLET PLUGS, screen mesh center, large JT8-D (set of 2) | 1 | |
| B717-160 | ENGINE EXHAUST PLUGS, folding type, large JT8-D (set of 2) | 1 | |
| B717-803 | WASH PREP: Small Vent PLUG aft of fwd door, left side | 1 | |
| B717-804 | WASH PREP: Small Vent PLUG at wing root, both sides (set of 2) | 1 | |
| B717-805 | WASH PREP: Exhaust Vent PLUG, left side, aft of Lg. Pressure Gate | 1 | |
| B717-806 | WASH PREP: Aft Air Inlet PLUG, on tail, center, Dorsal Ram Air Plug | 1 | |
| B717-807 | WASH PREP: APU Exhaust and PAC A/C Exhaust PLUGS, 1 left, 2 right side, above engines (set of 3) | 1 | |
| B717-816 | APU Shroud Cooling Air Inlet Plug, small circular inlet above PAC A/C Exhaust opening on aircraft right | 1 | |
| B727-101 | INTAKE PLUGS (folding type, Hush Kit) (set of 3) | 1 | |
| B727-102 | EXHAUST PLUGS (folding type, Hush Kit) (set of 3) | 1 | |
| B727-104 | EXHAUST PLUG (folding type, Engine #2) | 1 | |
| B737-165 | EXHAUST PLUGS (folding), 200 models: small JT8D - SET OF 2 | 1 | |
| B737-200 | BYPASS & EXHAUST PLUGS, folding donut ring type, 300-500 models - SET OF 6 | 1 | |
| B737-250 | BYPASS & EXHAUST PLUGS, folding donut ring type, 600-900 models (NG - SET OF 6 | 1 | |
| B737-255 | BYPASS & EXHAUST PLUGS, folding donut ring type, 600-900 models (NG - SET OF 6 | 1 | |
| B737-258 | BYPASS & EXHAUST PLUGS (includes exhaust nozzle plug), CFM LEAP - SET OF 8 | 1 | |
| B737-261 | EXHAUST NOZZLE PLUGS - SET OF 2 | 1 | |
| B737-270 | APU INTAKE/EXHAUST/COOLING PLUGS 600-900 models (NG / - SET OF 3 | 1 | |
| B737-274 | APU EXHAUST PLUG 600-900 models (NG / NexGen) - SET OF 1 | 1 | |
| B737-276 | APU EXHAUST PLUG 300-500 models - SET OF 1 | 1 | |
| B737-277 | APU EXHAUST PLUG, MAX models - SET OF 1 | 1 | |
| B737-278 | APU INTAKE/EXHAUST PLUGS 300-500 models - SET OF 2 | 1 | |
| B737-800 | STORAGE BAGS FOR Intake Plugs, heavy duty type, w/ logo & tail number - SET OF 2 | 1 | |
| B737-801 | STORAGE BAGS FOR Intake Plugs, heavy duty type, no artwork - SET OF 2 | 1 | |
| B737-802 | STORAGE BAGS FOR Exhaust Plug Set, heavy duty type, w/ logo & tail - SET OF 2 | 1 | |
| B737-803 | STORAGE BAGS FOR Exhaust Plug Set, heavy duty type, no artwork (set of 2) | 1 | |
| B747-200 | TURBINE EXHAUST PLUGS, Rolls Royce RB211 Engines (set of 4) | 1 | |
| B747-201 | BYPASS VENT & TURBINE EXHAUST PLUGS, PW JT9D Engines (set of 16) | 1 | |
| B747-202 | BYPASS VENT & TURBINE EXHAUST PLUGS, PW JT9D Engines (Single Nacelle) (set of 4) | 1 | |
| B747-203 | BYPASS VENT, TURBINE EXHAUST, & EXHAUST NOZZLE PLUGS, GE CF6-50 Engines (set of 20) | 1 | |
| B747-204 | BYPASS VENT, TURBINE EXHAUST, & EXHAUST NOZZLE PLUGS, GE CF6-50 Engines (Single Nacelle) (set of 5) | 1 | |
| B747-205 | BYPASS VENT, & TURBINE EXHAUST PLUGS, GE CF6-80C2 Engines (set of 16) | 1 | |
| B747-206 | BYPASS VENT & TURBINE EXHAUST PLUGS, GE CF6-80C2 Engines (Single Nacelle) (set of 4) | 1 | |
| B747-207 | BYPASS VENT, TURBINE EXHAUST, & EXHAUST NOZZLE PLUGS, GEnx Engines (set of 20) | 1 | |
| B747-208 | BYPASS VENT, TURBINE EXHAUST, & EXHAUST NOZZLE PLUGS, GEnx Engines (Single Nacelle) (set of 5) | 1 | |
| B747-210 | BYPASS VENT & TURBINE EXHAUST PLUGS, PW 4000 Engines (set of 16) | 1 | |
| B747-605 | EXHAUST PLUGS STORAGE BAGS, heavy-duty type, w/ logo & aircraft tail number (set of 4) | 1 | |
| B757-200 | EXHAUST PLUGS, Rolls Royce Engine, folding type (specify 757 model and exact engine model) (set of 2) | 1 | |
| B757-201 | EXHAUST PLUGS, PW engine, incl. Fan Thrust Reverser and Exhaust Plugs, folding type (set of 6) | 1 | |
| B757-205 | PASSENGER A/C INLET/EXHAUST PLUGS, w/ grometted Remove Before Flight Streamers (set of 4) | 1 | |
| B757-210 | EXHAUST PLUGS, Rolls Royce Engine, "Champagne Cork" type (specify 757 model and exact engine model) (set of 2) | 1 | |
| B757-260 | APU EXHAUST PLUG | 1 | |
| B757-275 | A/C EXHAUST PLUGS (set of 2) | 1 | |
| B757-280 | EXHAUST VENT PLUG, (left side fwd of APU exhaust) | 1 | |
| B757-300 | STORAGE BAGS FOR Intake Plugs, heavy duty type, w/ logo & tail number imprint (set of 2) | 1 | |
| B757-301 | STORAGE BAGS FOR Intake Plugs, heavy duty type, no artwork (set of 2) | 1 | |
| B757-302 | STORAGE BAGS FOR Exhaust Plug Set, heavy duty type, w/ logo & tail number imprint (set of 2) | 1 | |
| B757-303 | STORAGE BAGS FOR Exhaust Plug Set, heavy duty type, no artwork (set of 2) | 1 | |
| B76-102 | HEATER INLET PLUG | 1 | |
| B767-200 | BYPASS VENT & TURBINE EXHAUST PLUGS, PW JT9D Engines (set of 6) | 1 | |
| B767-201 | BYPASS VENT & TURBINE EXHAUST PLUGS, GE CF6-80C2 Engines, includes nozzle cover (set of 8) | 1 | |
| B767-202 | BYPASS VENT & TURBINE EXHAUST PLUGS, PW JT9D Engines (Single Nacelle) (set of 3) | 1 | |
| B767-203 | BYPASS VENT & TURBINE EXHAUST PLUGS, GE CF6-80C2 Engines (Single Nacelle) (set of 3) | 1 | |
| B767-205 | PASSENGER A/C INLET/EXHAUST PLUGS, w/ grometted Remove Before Flight Streamers (set of 4) | 1 | |
| B767-206 | BYPASS VENT & TURBINE EXHAUST PLUGS, PW 4000 Engines (set of 6) | 1 | |
| B767-210 | STORAGE BAGS FOR Exhaust Plug Set, heavy duty type (set of 2) | 1 | |
| B767-211 | STORAGE BAGS FOR Intake Plug Set, heavy duty type (set of 2) | 1 | |
| B777-200 | BYPASS VENT & TURBINE EXHAUST PLUGS, PW4000 Engines (set of 8) | 1 | |
| B777-201 | BYPASS VENT & TURBINE EXHAUST PLUGS, PW4000 Engines (Single Nacelle) (set of 4) | 1 | |
| B777-205 | BYPASS VENT & TURBINE EXHAUST PLUGS, GE90 Engines (set of 14) | 2 | |
| B777-206 | BYPASS VENT & TURBINE EXHAUST PLUGS, GE90 Engines (Single Nacelle) (set of 7) | 1 | |
| B777-216 | BYPASS VENT & TURBINE EXHAUST PLUGS, RR Trent 800 Engines (set of 14) | 1 | |
| B777-250 | APU EXHAUST PLUG | 1 | |
| B78016-6 | CHECKING PLUG, | 4 | |
| B787-200 | BYPASS VENT, TURBINE EXHAUST, & EXHAUST NOZZLE PLUGS, GEnx Engines (set of 10) | 1 | |
| B787-201 | BYPASS VENT, TURBINE EXHAUST, & EXHAUST NOZZLE PLUGS, GEnx Engines (Single Nacelle) (set of 5) | 1 | |
| B787-203 | BYPASS VENT & TURBINE EXHAUST PLUGS, Trent 1000 Engines (set of 8) | 1 | |
| B90-106 | ENGINE INLET PLUGS (Blackhawk Conversion) (set of 2) | 1 | |
| B90-110 | HEAT EXCHANGER INLET PLUGS (set of 2) | 1 | |
| B90-121 | HEATER AIR INLET PLUG (ON NOSE, PORT SIDE, AFT OF PITOT) | 1 | |
| B90-130 | EXHAUST PLUGS (set of 4) | 1 | |
| B901-110 | HEAT EXCHANGER INLET PLUGS (set of 2) | 1 | |
| B901-130 | EXHAUST PLUGS (set of 4) | 1 | |
| B95-103 | HEATER INLET PLUGS (ON NOSE) (set of 2) | 1 | |
| BACC63CB18-31SN | THE AVIATION PLUG | 1 | |
| BACP20AU10D | PLUG - FIRE BOTTLE DISCHARGE TUBE, 5/8 INCH LINE, ALUMINIUM | 4 | |
| BACP20AU10J | PLUG - HYDRAULIC PRESSURE TUBE, 5/8 INCH LINE, CORROSION RESISTANT STEEL | 1 | |
| BACP20AU8D | PLUG - HYDRAULIC RETURN TUBE, 1/2 INCH LINE, ALUMINUM | 1 | |
| BACP20AU8J | PLUG - HYDRAULIC RETURN TUBE, 1/2 INCH LINE, CORROSION RESISTANT STEEL | 3 | |
| BAJ-105 | EXHAUST PLUGS (set of 2) | 1 | |
| BBJ-APU-K | APU INTAKE/EXHAUST/COOLING PLUG | 1 | |
| BBJ-XG-2001 | PLUG - BYPASS & EXHAUST | 1 | |
| BJET-109 | ENGINE INTAKE & EXHAUST PLUG SET (set of 4) | 1 | |
| BJET-111 | ENGINE INTAKE & EXHAUST PLUG SET (Hawker 400XPR, FJ44-4A Engines) (set of 8) | 1 | |
| BJET-113 | ENGINE INTAKE & EXHAUST PLUG SET, includes Generator Inlet Plugs (set of 6) | 1 | |
| BJET-121 | EXHAUST PLUGS (set of 2) | 1 | |
| BL47605 | SPECIAL WRENCH FOR PLUG | 1 | |
| BLD/8165 | INDICATOR HUMIDITY PLUG (RF SCREENED) | 1 | |
| BMP-900245 | FROTH PLUG | 1 | |
| BN-MCX6 | Cable, BNC to MCX Plug, Straight, 6' length | 1 | |
| BN-MCXR6 | CABLE, BNC TO MCX RIGHT ANGLE PLUG, 6' LENGTH | 1 | |
| BT13-110 | OIL COOLER, EXHAUST, CARB AIR PLUGS (set of 4) | 1 | |
| BU-00244-0 | BANANA PLUG 0.25 INCH DIAMETER, 18 AWG (QTY. 4) | 1 | |
| C10003 | Exhaust Plugs - Auxiliary Power Unit | 1 | |
| C10006-1 | PLUG EQUIPMENT - ENGINE EXHAUST, CFM LEAP - 1B | 5 | |
| C10007-2 | LH plug assy | 1 | |
| C10007-3 | RH plug assy | 1 | |
| C107-08-0094-2 | HEAT SHIELD COOLING VENTURI PLUG | 1 | |
| C107-08-0094-3 | HEAT SHIELD LEAKAGE VENTURI PLUG | 1 | |
| C114-200 | EXHAUST PLUGS (set of 2) | 1 | |
| C12955 | PLUG CANISTER PRESS. SWITCH CONNECT | 1 | |
| C130-100 | ATM COOLING INLET PLUG (forward and above left main gear), NSN 1730-01-530-6756, "SHIELD,AIRCRAFT GROUND SERVICING" | 1 | |
| C130-110 | GTC TAILPIPE EXHAUST PLUG (forward of main gear, left side) | 1 | |
| C130-120 | FLIGHT DECK A/C INLET PLUG (on right side, below cockpit area) | 1 | |
| C130-121 | FLIGHT DECK A/C INLET/EXHAUST PLUG SETS: H, J, T, P & U-models (on right side, below cockpit area), NSN 1730-01-530-6757, "SHIELD,AIRCRAFT GROUND SERVICING" (set of 2) | 1 | |
| C130-122 | FLIGHT DECK A/C INLET/EXHAUST PLUGS (set of 2) | 1 | |
| C130-130 | HEAT EXCHANGER EXHAUST PLUG (on right side, forward of main gear) | 1 | |
| C130-141 | CARGO COMPARTMENT A/C INLET/EXHAUST PLUGS: H, J, T, P & U models, NSN 1730-01-530-6758 "SHIELD,AIRCRAFT GROUND SERVICING" (set of 2) | 1 | |
| C130-142 | CARGO COMPARTMENT A/C INLET/EXHAUST PLUGS (set of 2) | 1 | |
| C130-152 | MAIN ENGINE INLET PLUGS, heavy duty type, NSN 1730-01-530-6759 "SHIELD, AIRCRAFT GROUND SERVICING" (set of 4) | 1 | |
| C130-155 | EXHAUST PLUGS (set of 4) | 1 | |
| C130-156 | EXHAUST PLUGS (J Models) (set of 4) | 1 | |
| C130-162 | OIL COOLER INLET PLUGS, (H, J, P, T & U models), heavy duty type (set of 4) | 1 | |
| C130-163 | OIL COOLER INLET PLUGS, heavy duty type, NSN 1730-01-530-6760 "SHIELD,AIRCRAFT GROUND SERVICING" (set of 4) | 1 | |
| C17-200 | BYPASS VENT & EXHAUST PLUGS, donut ring folding type (set of 12) | 1 | |
| C17-201 | EXHAUST PLUGS (set of 4) | 1 | |
| C21003-16 | PLUG (SIZE & SHAPE PER DWG) | 1 | |
| C21003-87 | PLUG ASSY PACK WASH | 2 | |
| C212-150 | EXHAUST PLUGS (set of 2) | 1 | |
| C23-102 | FRESH AIR PLUGS (set of 2) | 1 | |
| C23-103 | FRESH AIR EXHAUST PLUG (pilot side of fuselage) | 1 | |
| C235-150 | EXHAUST PLUGS (set of 2) | 1 | |
| C270CP | Sesame Technologies C270CP Oil Cooler Plug, For Aircraft | 2 | |
| C27APU0CP | Sesame Technologies C27APU0CP Auxiliary Power Unit Oil Cooler Plug, For Aircraft | 2 | |
| C27APUEP | Sesame Technologies C27APUEP Auxiliary Power Unit Exhaust Plug, For Aircraft | 2 | |
| C27FEPP | Sesame Technologies C27FEPP Fod Ejection Port Plug, For Aircraft | 2 | |
| C28007-4 | HORIZONTAL PLUG ASSY | 1 | |
| C300-200 | EXHAUST PLUGS, folding type (set of 2) | 1 | |
| C300-300 | HEAT EXCHANGER EXHAUST PLUG | 1 | |
| C300-500 | APU EXHAUST PLUG | 1 | |
| C300-515 | DE-ICING, GENERATOR INTAKE & EXHAUST PLUGS (on bottom of engine nacelle) (set of 6) | 1 | |
| C350-115 | FRESH AIR/OAT VENT PLUG | 1 | |
| C36001-34 | Hex Head Plug | 1 | |
| C36001-70 | Plug with 0.032 inch hole AN4 | 3 | |
| C38001-1 | PLUG - DRAIN MAST, WASTE WATER (THE BOEING COMPANY) | 4 | |
| C38002-1 | PLUG EQPT - SKIN FITTING, DOOR SILL DRAIN (THE BOEING COMPANY) | 13 | |
| C49009-3 | Exhaust duct plug assy | 1 | |
| C500-117 | INTAKE/EXHAUST PLUG SET (set of 4) | 1 | |
| C500-120 | EXHAUST PLUGS (set of 2) | 1 | |
| C510-100 | ENGINE INLET COVERS & EXHAUST PLUGS, w/ intercooler plugs (set of 6) | 1 | |
| C510-110 | ENGINE INLET PLUGS & EXHAUST PLUGS, w/ intercooler intake & exhaust and gen. plugs (set of 10) | 1 | |
| C510-115 | ENGINE INLET PLUGS, w/ intercooler intake & exhaust and gen. plugs (set of 8) | 1 | |
| C510-130 | EXHAUST PLUGS (set of 2) | 1 | |
| C510-150 | ENGINE COVERS, Hangar Use, Bikini type, w/ intercooler inlet plugs on l.e. of pylon (set of 4) | 1 | |
| C550-100 | INTAKE COVERS & EXHAUST PLUGS (specify gen. inlet) (recommended) (set of 4) | 1 | |
| C550-165 | EXHAUST PLUGS (set of 2) | 1 | |
| C560-111 | ENGINE COVERS (WITH TR's), includes gen. plug below nacelle (set of 6) | 1 | |
| C560-112 | INTAKE COVER/EXHAUST PLUG SET, recommended, (with TR's), includes gen. plug below nacelle (set of 6) | 1 | |
| C560-114 | EXHAUST PLUGS (set of 2) | 1 | |
| C560-115 | INTAKE PLUGS, with pylon plugs (set of 4) | 1 | |
| C565-102 | INTAKE COVERS & EXHAUST PLUGS, includes wedge plug for nacelle (recommended) (set of 6) | 1 | |
| C565-105 | EXHAUST PLUGS (set of 2) | 1 | |
| C565-107 | INTAKE/EXHAUST PLUG SET (set of 4) | 1 | |
| C600-110 | EXHAUST PLUGS (folding type) (set of 2) | 1 | |
| C601-110 | EXHAUST PLUGS (set of 2) | 1 | |
| C604-110 | EXHAUST PLUGS (set of 2) | 1 | |
| C650-101 | INTAKE COVERS & EXHAUST PLUGS (recommended) (set of 4) | 1 | |
| C650-150 | INTAKE/EXHAUST PLUGS (set of 4) | 1 | |
| C650-160 | EXHAUST PLUGS (set of 2) | 1 | |
| C651-101 | INTAKE COVERS & EXHAUST PLUGS (recommended) (set of 4) | 1 | |
| C651-105 | INTAKE & EXHAUST PLUG SET (set of 4) | 1 | |
| C680-104 | GENERATOR & A/C EXHAUST PLUGS (bottom of nacelle) (set of 6) | 1 | |
| C680-105 | INTAKE COVERS/EXHAUST PLUGS, folding type (set of 4) | 1 | |
| C680-110 | INTAKE/EXHAUST PLUG SET, folding type, includes starter generator plugs (set of 6) | 1 | |
| C680-115 | EXHAUST PLUGS, folding type (set of 2) | 1 | |
| C680-120 | APU EXHAUST PLUG | 1 | |
| C680A-105 | INTAKE COVERS/EXHAUST PLUGS, folding type (set of 4) | 1 | |
| C680A-115 | EXHAUST PLUGS, folding type (set of 2) | 1 | |
| C680A-120 | APU EXHAUST PLUG | 1 | |
| C700-105 | INTAKE/EXHAUST COVERS SET, includes wedge plugs under nacelle (set of 6) | 1 | |
| C700-111 | INTAKE/EXHAUST COVERS, 3-strap type, includes wedge plugs under nacelle (set of 6) | 1 | |
| C700-115 | EXHAUST PLUGS, folding type (set of 2) | 1 | |
| C78005-32 | Hex Plug | 1 | |
| C78009-1 | EQUIPMENT - HANDLING, PRIMARY EXHAUST SLEEVE AND PLUG | 2 | |
| C78009-19 | EQUIPMENT - HANDLING, PRIMARY EXHAUST SLEEVE AND PLUG | 5 | |
| C78009-33 | EXH NOZZLE/PLUG HAND EQUIPMENT | 5 | |
| C78009-38 | EQUIPMENT - HANDLING, PRIMARY EXHAUST SLEEVE AND PLUG | 6 | |
| C78009-39 | Equipment - Handling, Primary Exhaust Sleeve and Plug | 9 | |
| C78009-72 | EQUIPMENT - HANDLING, PRIMARY EXHAUST SLEEVE AND PLUG | 6 | |
| C78009-77 | Equipment - Handling, Primary Exhaust Sleeve and Plug | 1 | |
| C78009-88 | Equipment - Handling, Primary Exhaust Sleeve and Plug | 9 | |
| C7800988 | HANDLING PRIMARY EXHAUST, SLEEVE AND PLUG(SPL-2419) | 9 | |
| C78034-1 | EQUIPMENT - HANDLING, PRIMARY EXHAUST SLEEVE AND PLUG | 10 | |
| C90A-110 | HEAT EXCHANGER INLET PLUGS (in leading edge) (set of 2) | 1 | |
| C90A-125 | HEATER AIR INLET PLUG (ON NOSE, PORT SIDE, AFT OF PITOT) | 1 | |
| C90A-130 | EXHAUST PLUGS (set of 4) | 1 | |
| C90B-110 | HEAT EXCHANGER INLET PLUGS (set of 2) | 1 | |
| C90B-125 | HEATER AIR INLET PLUG (ON NOSE, PORT SIDE, AFT OF PITOT) | 1 | |
| C90B-130 | EXHAUST PLUGS (set of 4) | 1 | |
| CAN-200 | EXHAUST PLUGS (set of 2) | 1 | |
| CAS-100 | ENGINE INLET PLUG, HA-200 | 1 | |
| CAS-101 | ENGINE INLET PLUGS, HA-220 (set of 2) | 1 | |
| CAS-120 | EXHAUST PLUGS (set of 2) | 1 | |
| CG471-16 | PUSH PLUG | 1 | |
| CG9000059-0001 | Plug - ESC Exhaust | 1 | |
| CH1542-0277 | Lee Plug Punch | 1 | |
| CH1543-0042 | PRESSURE BLANKING PLUG FOR CONDUCTING TEST ON GUIDE TUBE ASSY (P/N CH1543A0011) | 1 | |
| CITX-115 | EXHAUST PLUGS, folding type (set of 2) | 1 | |
| CITX-120 | APU EXHAUST PLUG | 1 | |
| CJ1-100 | ENGINE INLET COVERS & EXHAUST PLUGS, includes generator outlet and pylon plugs (specify if CJ1+ model) (set of 8) | 1 | |
| CJ1-101 | ENGINE INLET PLUGS & EXHAUST PLUGS, includes generator outlet and pylon plugs (set of 10) | 1 | |
| CJ1-110 | ENGINE COVERS, Hangar Use, Bikini Type w/out Pylon Plugs (set of 2) | 1 | |
| CJ1-111 | ENGINE COVERS, Hangar Use, Bikini Type w/ Pylon Plugs (set of 4) | 1 | |
| CJ1-120 | EXHAUST PLUGS (specify if CJ1+ model) (set of 2) | 1 | |
| CJ2-100 | ENGINE INLET COVERS & EXHAUST PLUGS, CJ2 Models (set of 8) | 1 | |
| CJ2-101 | ENGINE INLET PLUGS & EXHAUST PLUGS, CJ2 Models (set of 10) | 1 | |
| CJ2-102 | ENGINE INLET COVERS & EXHAUST PLUGS, CJ2+ Models (set of 10) | 1 | |
| CJ2-103 | ENGINE INLET PLUGS & EXHAUST PLUGS, CJ2+ Models (set of 12) | 1 | |
| CJ2-111 | ENGINE COVERS, Hangar Use, Bikini Type, includes Pylon Inlet plugs (set of 4) | 1 | |
| CJ2-120 | EXHAUST PLUGS, CJ2 Models (set of 2) | 1 | |
| CJ2-121 | EXHAUST PLUGS, CJ2+ Models (set of 4) | 1 | |
| CJ3-100 | INTAKE COVERS & EXHAUST PLUGS (includes Engine Intake Covers, Exhaust Plugs, Pylon Inlet, Oil Outlet, and Pylon Exit plugs (set of 10) | 1 | |
| CJ3-102 | ENGINE COVERS (includes Engine Intake & Exhaust Cover, Pylon Inlet, Oil Outlet, and Pylon Exit plugs) (set of 10) | 1 | |
| CJ3-103 | COMPLETE ENGINE PLUGS (includes Engine Intake, Engine Exhaust, Pylon Inlet, Oil Inlet, Oil Outlet, and Pylon Exit plugs (set of 12) | 1 | |
| CJ3-120 | ENGINE EXHAUST PLUGS (set of 2) | 1 | |
| CJ4-100 | ENGINE INLET COVERS & EXHAUST PLUGS (set of 6) | 1 | |
| CJ4-101 | ENGINE INLET & EXHAUST PLUGS (set of 8) | 1 | |
| CJ4-120 | EXHAUST PLUGS (set of 2) | 1 | |
| CJ4-150 | ENGINE COVERS, Hangar Use, Bikini Type, includes intercooler plugs on pylon (set of 4) | 1 | |
| CJ4-155 | ENGINE COVERS, Hangar/Intermittant Outdoor Use, Entire Nacelle, includes intercooler plugs on pylon (set of 4) | 1 | |
| CLAA99-14CRG | 4-BAY BATTERY CHARGER FOR 9900/9100 SYSTEM BATTERIES. THE 4-BAY BATTERY CHARGER (CLAA99-14CRG) REQUIRES A STANDARD 110V CORD WITH A THREE-PRONG PLUG FOR CHARGING | 1 | |
| CM-S-389T | BACKSHELL ADAPTOR TOOL SET , ALUMINUM (PLUG) | 4 | |
| CM288-29A | MIL-DTL-28840 Adaptor Tool for Plug Size 29(H) | 2 | |
| CM288-29B | MIL-DTL-28840 Adaptor Tool for Plug Size 29(H) | 2 | |
| CM389B-23 | MIL-DTL-38999 Series 4 Adaptor Tool for Plug Size 23(H) | 2 | |
| CM389T-23A | MIL-DTL-38999 Series 3 Adaptor Tool for Plug Size 23(H) | 2 | |
| CM389T-23B | MIL-DTL-38999 Series 3 Adaptor Tool for Plug Size 23(H) | 2 | |
| CM815L-22A | MIL-C-81511 Series 1, 3 Adaptor Tool for Plug Size 22(H) | 2 | |
| CM815L-22B | MIL-C-81511 Series 1, 3 Adaptor Tool for Plug Size 22(H) | 2 | |
| CPS737NGARR | 737 NG COVER & PLUG SET - FULL COVER PLUG SET WITH INLET COVER, THRUST REVERSER AND EXHAUST PLUGS, A | 4 | |
| CPS737NGARR-4 | APU INTAKE/EXHAUST/COOLING PLUG | 2 | |
| CPS737NGARR2 | 737 NG COVER & PLUG SET - FULL COVER PLUG SET WITH INLET COVER, THRUST REVERSER & EXHAUST PLUGS, APU | 3 | |
| CPS787ARR-2 | PROTECTIVE PLUG - ENGINE FAN AIR EXHAUST, RR | 1 | |
| CPS787ARR-3 | PROTECTIVE PLUG - ENGINE EXHAUST, RR | 1 | |
| CRJ-107 | EXHAUST PLUG SET, includes bypass vent and exhaust (set of 6) | 1 | |
| CRJ-110 | EXHAUST NOZZLE PLUGS (set of 2) | 1 | |
| CT415 | CHAMPION CT-415AV PLUG GAPPER | 1 | |
| CT415AV | CHAMPION CT-415AV PLUG GAPPER | 5 | |
| CT446 | Champion Aerospace CT-446 12-Hole Spark Plug Tray | 6 | |
| CT475AV | CLEANER & TESTER: SVC UNIT,SPARK PLUG, 110V,60HZ,35W | 4 | |
| CUTA3120103B | REMOVAL TOOL SET FOR THE LEE PLUG | 1 | |
| CUTA3120203A | INSTALLATION TOOL FOR THE LEE PLUG | 1 | |
| CV-475AV | CHAMPION AVIATION SPARK PLUG TESTER 110V AND 220V | 1 | |
| CXL-100 | INTAKE COVER & EXHAUST PLUGS (recommended) (set of 4) | 1 | |
| CXL-101 | INTAKE COVER/EXHAUST PLUG SET, includes Starter Gen. & Alternator Port plugs (set of 8) | 1 | |
| CXL-103 | INTAKE/EXHAUST PLUG SET, includes Starter Gen. & Alternator Port plugs (set of 8) | 1 | |
| CXL-107 | EXHAUST PLUG SET (set of 2) | 1 | |
| D-4000 | FEDERAL DIMENSION AIR GAGE ( WITH SETTING RING ADN AIR PLUG) OR EQUIVALENT 1.1268 SETTING RING 1.1268 AIR PLUG | 1 | |
| D228-100 | ENGINE INLET/EXHAUST PLUGS (set of 6) | 1 | |
| D328-110 | ENGINE EXHAUST PLUGS (set of 2) | 1 | |
| D328-115 | APU EXHAUST PLUG | 1 | |
| D38999-33W9R | CAP-PROTECTIVE, D38999 PLUG, SHELL SIZE 9 | 3 | |
| D55-110 | HEATER INLET PLUGS (ON NOSE) (set of 2) | 1 | |
| D55-115 | FRESH AIR INLET PLUG (ON DORSAL) | 1 | |
| D730L | PLUG, DRAIN HOSE ASSY | 1 | |
| DA42-102 | CABIN AIR HEAT EXCHANGER INLET PLUG (right wing) | 1 | |
| DAJ-110 | EXHAUST PLUGS, non-folding type (set of 2) | 1 | |
| DAS-200 | EXHAUST PLUG | 1 | |
| DC10-200 | EXHAUST PLUGS, Bypass, Exhaust & Exhaust Cone Nozzle, donut style folding type, GE CF6 Engine (set of 9) | 1 | |
| DC10-205 | EXHAUST PLUGS, Bypass and ExhaustTurbine, PW 4000 series engine (set of 9) | 1 | |
| DC3-103 | EXHAUST PLUGS (set of 2) | 1 | |
| DC8-115 | EXHAUST PLUGS, Bypass Vent and Exhaust, 3 per engine (set of 12) (set of 12) | 1 | |
| DET-TPS-HO-AT01N | HOLDER FOR VENT PLUG | 1 | |
| DETTPSH0AI00 | AIRBUS HOLDER FOR VENT PLUGS | 1 | |
| DETTPSH0AI01 | VENT PLUG HOLDER | 1 | |
| DETTPSVPAI06 | VENT PLUGS & HOLDERS | 1 | |
| DH1-100 | ENGINE INLET PLUGS (English Model) (set of 3) | 1 | |
| DH2-111 | ENGINE PLUGS (radial engine, has spinner) (set of 3) | 1 | |
| DH8-100 | ENGINE INLET PLUGS (SPECIFY MODEL DASH8-Q400) (SET OF 2) | 1 | |
| DJET-200 | EXHAUST PLUG | 1 | |
| DO7010-250 | 4 WIRE LEAD WITH BANA PLUGS AND TIOS (VN-VG) | 1 | |
| DO7010-251 | 4 W2 WIRE PROBE, 4 PIS MALE PLUG, COINCENTRIC TIPS, LENGTH - 150MM | 1 | |
| DO7010-258 | 2 WIRE PROBE, 4 PINS MALE PLUG, CONCENTRIC TIPS, LENGTH - 180MM | 1 | |
| DO7010-28/1 | 2 WIRE PROBE, 4 PINS MALE PLUG , PARALLEL TIPS, LENGTH - 180MM. REMOTE CONTROL PUSH BUTTON | 1 | |
| DZZ7133-1 | WING PYLON ATTACH PLUG | 1 | |
| DZZ7134-1 | WING PYLON ATTACH PLUG | 1 | |
| DZZ7134-507 | Set-instl，wing pylon attach plugs | 1 | |
| DZZ7391 | PLUG - GAMAH FITTING | 1 | |
| E033-425-100 | CYLINDER PLUG STRAIGHT THREAD BLACK | 1 | |
| E033-435-100 | CYLINDER PLUG STRAIGHT THREAD RED | 1 | |
| E120-100 | ENGINE PLUGS (left & right engine deck, oil cooler plugs) (set of 3) | 1 | |
| E120-102 | EXHAUST PLUG | 1 | |
| E120-103 | PARTICLE SEPARATOR EXHAUST PORT PLUG | 1 | |
| E12248AAS2 | CHARGER: BATTERY,12V,8A, PLUG-N-RUN,220/240VAC INPUT | 4 | |
| E130-125 | EXHAUST PLUG | 1 | |
| E135-125 | EXHAUST PLUGS (set of 2) | 1 | |
| E135-700 | ENGINE EXHAUST PLUGS, exhaust & aft doghouse plug (set of 3) | 1 | |
| E135-710 | ENGINE EXHAUST PLUGS, exhaust & aft doghouse plug, P2 models (set of 3) | 1 | |
| E145-125 | EXHAUST PLUGS (set of 2) | 1 | |
| E145-130 | FRESH AIR INLET PLUGS, on belly of nose (set of 2) | 1 | |
| E20PWUS | E20PWUS;ADDITIONAL AC ADAPTER/CHARGER W/ US PLUG FOR TB2000 SMARTOTDR AND OPTIMETER | 1 | |
| E24041AAS2 | CHARGER: BATTERY,24V,8A, PLUG-N-RUN,220/240VAC INPUT | 2 | |
| E74257 | 0.312 CHECK VALVE PLUG | 1 | |
| E98X04 | E98X04;Optical Switch 1X4 Plug in Module (SC/APC) | 1 | |
| E98X08 | E98X08;Optical Switch 1X8 Plug in Module (SC/APC) | 1 | |
| E98X12 | E98X12;Optical Switch 1X12 Plug in Module (SC/APC) | 1 | |
| E98X16 | E98X16;Optical Switch 1X16 Plug in Module (SC/APC) | 1 | |
| E98X16-ENC | E98X16-ENC;Optical Switch 1X16 Plug in Module SC/APC Encore | 1 | |
| E98X24 | E98X24;Optical Switch 1X24 Plug in Module (SC/APC) | 1 | |
| E98X288MPO | E98X288MPO;OPTICAL SWITCH 1X288 PLUG IN MODULE WITH MPO-12 CONNECTORS | 1 | |
| E98X36LCAPC | E98X36LCAPC;Optical Switch 1X36 Plug in Module (LC/APC) | 1 | |
| E98X48LCAPC | E98X48LCAPC;Optical Switch 1X48 Plug in Module (LC/APC) | 1 | |
| E98X576MPO | E98X576MPO;OPTICAL SWITCH 1X576 PLUG IN MODULE WITH MPO-12 CONNECTORS | 1 | |
| EAX0066L10B | CIG LIGHTER CABLE MALE PLUG | 1 | |
| ECFDA0509-16 | CABLE WITH PLUG | 1 | |
| ECFLPRA0-7EU | EU PLUG USB-C CHARGER 5V 3.5A | 1 | |
| EECTCORDBLP | BLACK COIL DC PLUG EECT301H | 1 | |
| EETM306A04 | COIL ON PLUG2 ADPTR CHRY | 1 | |
| EG16104-511 | 6CAPlug, Placard 2Hose (no box) | 1 | |
| EMB-01163-001 | EMB 120 HYDRAULIC FILTER PLUG | 1 | |
| ER581 | POWER EXTENSION CABLE 50HZ- L 80ML – FEMALE/MALE MARÉCHAL DS2 PLUG HO7RNF 4G70² | 1 | |
| ESP-106 | NACA VENT FRESH AIR PLUGS (Max Model) (set of 2) | 1 | |
| ETS15042-343 | 6.0MM H8 PLUG GAUGE | 1 | |
| EUF-210 | EXHAUST PLUGS (set of 2) | 1 | |
| EddyFi Ectane (E128RNMI) Base Unit | EddyFi Ectane (E128RNMI) Base Unit - Multi-technology for tube inspections: ECT, RFT, NFT, MFL, and array equivalents, and IRIS ultrasound technology, Plug-and-play connectivity | 1 | |
| F10-150 | ENGINE EXHAUST PLUGS (set of 2) | 1 | |
| F1000823200000 | PLUG-APU EXHAUST DUCT | 1 | |
| F104-110 | EXHAUST PLUG | 1 | |
| F15-110 | ENGINE INLET PLUGS, NSN: 1730-01-573-3631 SHIELD, AIRCRAFT GROUND SERVICING (set of 2) | 1 | |
| F15-111 | ENGINE INLET PLUG (EACH), NSN: 1730-01-573-3631 SHIELD, AIRCRAFT GROUND SERVICING | 1 | |
| F15-210 | EXHAUST PLUGS (set of 2) | 1 | |
| F16-100 | INTAKE PLUG, narrow mouth, bi-fold type, NSN 1730-01-542-3476 "COVER SET,AIRCRAFT SHIPPING" | 1 | |
| F16-101 | INTAKE PLUG w/forms pouch, narrow mouth, bi-fold type | 1 | |
| F16-102 | INTAKE PLUG, w/ forms pouch, narrow mouth | 1 | |
| F16-105 | INTAKE PLUG, block 40 models, bi-fold type (wide mouth) | 1 | |
| F16-106 | INTAKE PLUG w/forms pouch, block 40 models, bi-fold type (wide mouth) | 1 | |
| F16-107 | INTAKE PLUG, block 50 models, bi-fold type (wide mouth) | 1 | |
| F16-120 | INTAKE PLUG, wide mouth, bi-fold type | 1 | |
| F16-121 | INTAKE PLUG w/forms pouch, wide mouth, bi-fold type | 1 | |
| F16-122 | INTAKE PLUG, w/ forms pouch, wide mouth | 1 | |
| F16-176 | INTAKE/EXHAUST PLUG SET, specify narrow or wide mouth type (set of 2) | 1 | |
| F16-178 | INTAKE/EXHAUST PLUG SET w/forms pouch, specify narrow or wide mouth type (set of 2) | 1 | |
| F16-201 | EXHAUST PLUG, block 32 models, PW F100-220 engine | 1 | |
| F16-205 | EXHAUST PLUG, block 30 models, GE 110 engine | 1 | |
| F16-206 | EXHAUST PLUG, block 50 models | 1 | |
| F16-207 | EXHAUST PLUG, block 52 models | 1 | |
| F16-208 | EXHAUST PLUG, block 40 models | 1 | |
| F16-209 | EXHAUST PLUG, FOLDING TYPE, specify model | 1 | |
| F16-212 | EXHAUST PLUG, block 25 models | 1 | |
| F16-213 | EXHAUST PLUG, block 42 models | 1 | |
| F18-110 | ENGINE INLET PLUGS, HORNET (set of 2) | 1 | |
| F18-111 | ENGINE INLET PLUGS, SUPER HORNET (set of 2) | 1 | |
| F18-210 | EXHAUST PLUGS, HORNET (set of 2) | 1 | |
| F18-211 | EXHAUST PLUGS, SUPER HORNET (set of 2) | 1 | |
| F190-105 | EXHAUST PLUG SET (set of 6) | 1 | |
| F20-135 | ENGINE INTAKE/EXHAUST PLUGS (set of 4) | 1 | |
| F200-200 | EXHAUST PLUGS, bypass vent (set of 4) | 1 | |
| F22-150 | ENGINE EXHAUST PLUGS (set of 2) | 1 | |
| F26526000 | TOOL FOR A LEAK TEST OF THERMAL RELIEF PLUGS AND THE OVERINFLATION PLUG | 4 | |
| F26616000 | Tool for the leakage tests of the fusible plugs | 7 | |
| F27273000 | TOOL USED TO TEST THE FUSE PLUG ASSEMBLIES (1-380) OR (1-380A) AND THE PRESSURE RELIEF VALVE (1-060) | 2 | |
| F27435000 | WASHER,PLUG | 1 | |
| F2MA910026 | HEAT EXCHANGER EXHAUST PLUG | 1 | |
| F2MB910005-15 | EXHAUST PLUG , (ENVIRONMENT CONTROL) | 1 | |
| F2MB910005-16 | EXHAUST PLUG , (ENVIRONMENT CONTROL) | 1 | |
| F3182 | WRENCH-PLUG | 1 | |
| F35-200 | EXHAUST PLUG, A, B, C models | 1 | |
| F35-210 | EXHAUST PLUG, A, B, C models (folding type) | 1 | |
| F47858 | Tool For The Withdrwal And Installation Of Plug | 1 | |
| F5-210 | EXHAUST PLUGS (set of 2) | 1 | |
| F50-125 | EXHAUST PLUGS (folding type, outboard engines only) (set of 2) | 1 | |
| F50-126 | EXHAUST PLUGS (folding type) (set of 3) | 1 | |
| F50-135 | APU EXHAUST PLUG | 1 | |
| F50-140 | INSULATED FULLY ENCLOSED ENGINE COVERS (#1 & #3 engines), Intake Plug & Insulated Exhaust cover (#2 Engine) (set of 4) | 1 | |
| F50E-135 | APU EXHAUST PLUG | 1 | |
| F6X-120 | EXHAUST PLUGS (non-folding type) (set of 2) | 1 | |
| F6X-125 | EXHAUST PLUGS (folding type) (set of 2) | 1 | |
| F6X-505 | APU EXHAUST PLUG | 1 | |
| F70045 | PLUG ASSY -0 OIL COOLER AND STARTER EXHT. USED | 1 | |
| F70063 | KIT -0 PLUG SHIELD AND COVER KIT DRAWING LISTING | 1 | |
| F70078 | PLUG ASSY-OIL COOLER & FUEL AIR EXHAUST | 1 | |
| F70120 | PLUG ASSEMBLY - ELEC. RACK COOLING EXHAUST | 1 | |
| F70121 | PLUG EXHAUST COOLIN | 1 | |
| F70122 | PLUG -0 ENGINE EXHAUST JT3D TO EXCLUDE FOREIGN | 1 | |
| F70122-1 | ENGINE EXHAUST PLUG | 1 | |
| F70124-1 | PLUG ASSY - FAN EXH | 1 | |
| F70124-2 | PLUG -0 FAN EXHAUST | 1 | |
| F70146-11 | Plug Assy LH | 4 | |
| F70146-12 | Plug Assy RH | 3 | |
| F70151 | PLUG ASSY-EXHAUST DUCT USED TO EXCLUDE FOREIGN | 1 | |
| F70284-1 | WEAR GAGE SET - GROUND POWER PLUG AND RECEPTACLE (THE BOEING COMPANY) | 28 | |
| F71247 | PLUG ASSY -0 A-C GENERATOR EXHAUST TO EXCLUDE | 1 | |
| F71399 | PLUG ASSY-GEN.& HEAT EXCHANGER EXHAUST USED TO | 1 | |
| F72794 | PLUG -0 FERRY FLIGHT ENGINE OUTLET USED TO BLOCK | 1 | |
| F72794-1 | ENG EXHAUST PLUG | 1 | |
| F72794-18 | PLUG-FLIGHT FERRY ENG. OUTLET | 1 | |
| F72794-2 | ENG EXHAUST PLUG | 1 | |
| F72794-3 | ENG EXHAUST PLUG | 1 | |
| F72901 | TEST PLUG SET,727 FUEL SYSTEM,LEAK CHECK USED | 1 | |
| F78AE0201002 | EXHAUST PLUG ASSY FWD | 1 | |
| F78AE0257-000 | PROTECTOR JACKET - EXHAUST PLUG | 1 | |
| F78AE0260-000 | TROLLEY - EXHAUST FRONT PLUG | 1 | |
| F78AE0260-001 | TROLLEY - EXHAUST FRONT PLUG | 1 | |
| F78AE0261-000 | TROLLEY - EXHAUST REAR PLUG | 1 | |
| F78AE0261-002 | TROLLEY - EXHAUST REAR PLUG | 1 | |
| F78AE0262-000 | TROLLEY - EXHAUST NOZZLE PLUG | 1 | |
| F78AE0266-000 | ABSORBER-SHOCK EXHAUST FRONT PLUG | 1 | |
| F7X-120 | EXHAUST PLUGS (non-folding type) (set of 3) | 1 | |
| F7X-125 | EXHAUST PLUGS (folding type) (set of 3) | 1 | |
| F7X-505 | APU EXHAUST PLUG | 1 | |
| F7XC201005240 | APU EXHAUST PLUG | 1 | |
| F80056-1 | PLUG SET-NOSE WHEEL | 6 | |
| F80076 | Plug,Exhaust, APU | 1 | |
| F80076-1 | APU EXHAUST PLUG | 10 | |
| F80076-1. | EXHAUST PLUG | 10 | |
| F80080-10 | VENT DRAIN HOLE PLUG ASSY | 1 | |
| F80080-101 | PLUG HALF | 1 | |
| F80080-102 | PLUG HALF | 1 | |
| F80093 | PLUG - ENGINE EXHAUST | 2 | |
| F80093-1 | PLUG -0 ENGINE EXHAUST TO PREVENT FOREIGN MATTER | 1 | |
| F80155-1 | PLUG SET RAM AIR EXHAUST LEAK TEST | 2 | |
| F80198-1 | MLG WHEEL RETAINER NUT PLUG GAUGE | 2 | |
| F80198-12 | PLUG GAGE NUT WHEEL | 18 | |
| F80198-13 | PLUG GAGE NUT WHEEL | 11 | |
| F80198-14 | PLUG GAGE NUT WHEEL | 12 | |
| F80198-15 | PLUG GAGE NUT WHEEL | 9 | |
| F80198-16 | PLUG GAGE NUT WHEEL | 8 | |
| F80198-4 | MLG WHEEL RETAINER NUT PLUG GAUGE | 1 | |
| F80198-8 | MLG WHEEL RETAINER NUT PLUG GAUGE | 1 | |
| F80229-52 | SHORTING PLUG | 18 | |
| F80229-52-E | ELECTRICAL SHORTING PLUG | 1 | |
| F80229-52-REVE | SHORTING PLUG | 1 | |
| F80229-55 | ELECTRICAL SHORTING PLUG | 4 | |
| F80229-55-E | ELECTRICAL SHORTING PLUG | 1 | |
| F80229-56 | ELECTRICAL SHORTING PLUG | 5 | |
| F80229-56-E | ELECTRICAL SHORTING PLUG | 1 | |
| F80229-69 | FIRE TEST BOX (WITH ADOPTER CABLE & SHORTEMNG PLUG INCLUDED) | 18 | |
| F80299-52 | SHORTING PLUG - FIRE | 1 | |
| F86-200 | EXHAUST PLUG | 1 | |
| F8F-200 | EXHAUST PLUGS (set of 10) | 1 | |
| F900-120 | EXHAUST PLUGS (non-folding type) (set of 3) | 1 | |
| F900-125 | EXHAUST PLUGS (folding type) (set of 3) | 1 | |
| F900-129 | EXHAUST PLUG (Center #2 Exhaust plug only) | 1 | |
| F900-135 | APU EXHAUST PLUG | 1 | |
| FAP-12 | Forbes Aviation FAP-12 Aviation 12 Hole Spark Plug Tray | 3 | |
| FAP-18 | Forbes Aviation FAP-18 Aviation 18 Hole Spark Plug Tray | 1 | |
| FBPP-PSC1 | FBPP-PSC1;Power Supply Charger For HD3 US Plug | 1 | |
| FBPT-38999-G006 | FBPT-38999-G006;Guide 38999 Plug Size 13 Sockets with Size 16 Contacts1--Rev01 | 1 | |
| FBPT-A801-1-15-P | FBPT-A801-1-15-P;GUIDE ARINC TYPE 1 SIZE 15/06 SHELL PLUG W/SOCKETS | 1 | |
| FBPT-A801-1-17-P | FBPT-A801-1-17-P;GUIDE ARINC TYPE 1 SIZE 17/08 SHELL PLUG W/SOCKETS | 1 | |
| FBPT-A801-1-19-P | FBPT-A801-1-19-P;GUIDE ARINC TYPE 1 SIZE 19/12 SHELL PLUG W/SOCKETS | 1 | |
| FBPT-A801-1-21-P | FBPT-A801-1-21-P;GUIDE ARINC TYPE 1 SIZE 21/16 SHELL PLUG W/SOCKETS | 1 | |
| FBPT-A801-1-23-P | FBPT-A801-1-23-P;GUIDE ARINC TYPE 1 SIZE 23/24 SHELL PLUG W/SOCKETS | 1 | |
| FBPT-A801-1-25-P | FBPT-A801-1-25-P;GUIDE ARINC TYPE 1 SIZE 25/32 SHELL PLUG W/SOCKETS | 1 | |
| FBPT-A801-1000P | FBPT-A801-1000P;Guide- ARINC - Type 1 - Size 11-02 Shell - Plug with Sockets | 1 | |
| FBPT-A801-1001P | FBPT-A801-1001P;Plug ARINC Type 1 Size 13-04 Shell Socket | 2 | |
| FBPT-A801-1002P | FBPT-A801-1002P;PLUG ARINC TYPE 1 SIZE 15-06 SHELL SOCKETS | 3 | |
| FBPT-A801-4002P | Type 4/36 Contact Plug with Pins | 3 | |
| FBPT-COD-MT | FBPT-COD-MT;Tip OptiTip MM and HMFOC MM Includes Plug and Receptacle Guides | 1 | |
| FBPT-COD-MTA | FBPT-COD-MTA;TIP OPTITIP SM AND HMFOC SM INCLUDES PLUG AND RECEPTACLE GUIDES | 1 | |
| FBPT-COD-MTAPG | FBPT-COD-MTAPG;Guide OptiTip and HMFOC SM Plug | 1 | |
| FBPT-COD-MTPG | FBPT-COD-MTPG;Guide OptiTip and HMFOC MM Plug | 1 | |
| FBPT-MIL1-G001 | FBPT-MIL1-G001;Guide 28876 4 Contacts Plug Size 13 with Pins--Rev0 | 1 | |
| FBPT-MIL1-G002 | FBPT-MIL1-G002;Guide 28876 4 Contacts Plug Size 13 With Sockets | 1 | |
| FBPT-MIL1-G005 | FBPT-MIL1-G005;Guide - 28876 - 8 Contacts - Plug - Size 15 with Pins--Rev0 | 1 | |
| FBPT-MTC-G001 | FBPT-MTC-G001;Guide MTC Plug with Pins--Rev01 | 1 | |
| FBPT-NP-B2 | FBPT-NP-B2;Tip Sumitomo Nano-Plug Side B in Holder for FBP | 1 | |
| FBPT-PHD-G017 | FBPT-PHD-G017;GUIDE 38999-PHD 20 FIBER SIZE 17 PLUG PINS | 1 | |
| FBPT-PHD-G018 | FBPT-PHD-G018;GUIDE 38999-PHD 20 FIBER SIZE 17 PLUG SOCKETS--REV0 | 1 | |
| FBPT-PSHLK-MTA-P | FBPT-PSHLK-MTA-P;TIP PUSHLOK MT SM/APC PLUG | 1 | |
| FBPT-SABR-G002 | FBPT-SABR-G002;GUIGUIDE SABRITECH PART NUMBER 1643202019 PLUG WITH SOCKET | 1 | |
| FC-GE90-11B-EIC | PLUG THRUST REVERSER | 4 | |
| FC-GE90BPAP | PLUG THRUST REVERSER | 4 | |
| FC-GE90EEP | General Electric 90 Engine Exhaust Plug | 2 | |
| FC-PW4084BPAP | Pratt & Whitney 4084 Bypass Air Plug | 2 | |
| FC-PW4084EEP | Pratt & Whitney 4084 Engine Exhaust Plug | 4 | |
| FC-RRT800BPAP | PLUG THRUST REVERSER | 5 | |
| FC-RRT800EEP | Rolls-Royce Trent 800 Engine Exhaust Plug | 4 | |
| FCGE90EEP | PLUG - CORE EXHAUST | 2 | |
| FCLP-EC-01 | FCLP-EC-01;Extension Cable 0.25 Inch Plug for Use with CleanBlastPRO | 1 | |
| FCLT-HMFOC-P | FCLT-HMFOC-P;HMFOC Plug CleanBlast Tip | 1 | |
| FCLT-HMFOC-P-CF12 | FCLT-HMFOC-P-CF12;HMFOC Plug CleanBlast Tip 12-24F | 1 | |
| FCPT-COD-MT-P | FCPT-COD-MT-P;Tip OptiTip and HMFOC MM Plug for Sidewinder | 1 | |
| FCPT-COD-MTA-P | FCPT-COD-MTA-P;Tip OptiTip and HMFOC SM Plug for Sidewinder | 1 | |
| FCPT-JMTA-P | FCPT-JMTA-P;Tip Jonhon MT Plug SM for Sidewinder | 1 | |
| FCPT-MHCIII-G001 | FCPT-MHCIII-G001;GUIDE MHC III MT SM/APC PLUG | 1 | |
| FCPT-THDM-G021 | FCPT-THDM-G021;Guide THDMP 28876 Size 13 2 MT Blades Plug for Sidewinder | 1 | |
| FCPT-THDM-G041 | FCPT-THDM-G041;Guide THDMP 28876 Size 15 4 MT Blades Plug for Sidewinder | 1 | |
| FCRRT800EEP | PLUG - CORE EXHAUST | 4 | |
| FE188-110-07-T | PLUG PIN WRENCH | 1 | |
| FGPT | FORD GLOW PLUG HARNESS TOOL | 1 | |
| FMA-COD-MTA-P | FMA-COD-MTA-P;Adapter OptiTip and HMFOC SM Plug Male Threaded--REV0 | 1 | |
| FMAX-IP16-SN | FMAX-IP16-SN;IP-16 Plug Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FPT-PSHLK-A-P | FPT-PSHLK-A-P;Tip Pushlok APC Plug for INX | 1 | |
| FPT-PSHLK-MT-A-P | FPT-PSHLK-MT-A-P;Tip Pushlok MT APC Plug for INX-7 | 1 | |
| FSNMRS12PNLO | PLUG HYDRAULIC O-RING FACE S | 1 | |
| FSNMRS16PNLO | PLUG HYDRAULIC O-RING FACE SE | 1 | |
| FSNMRS4PNLOS | PLUG HYDRAULIC O-RING FACE S | 1 | |
| FSNMRS8PNLOS | PLUG HYDRAULIC O-RING FACE S | 1 | |
| G1-110 | EXHAUST PLUGS (set of 2) | 1 | |
| G100-110 | ENGINE INTAKE & EXHAUST PLUG SET (set of 4) | 1 | |
| G10004-1 | PROTECTIVE PLUG SET - ENGINE ANTI-ICE EXHAUST | 2 | |
| G10005-1 | PROTECTIVE PLUG EQUIPMENT - ENGINE EXHAUST, GEnx-2B | 1 | |
| G10005-14 | PROTECTIVE PLUG EQUIPMENT - ENGINE EXHAUST, GEnx-2B | 1 | |
| G10005-23 | PROTECTIVE PLUG EQUIPMENT - ENGINE EXHAUST, GEnx-2B | 4 | |
| G10006-1 | PROTECTIVE PLUG EQUIPMENT - THRUST REVERSER EXHAUST | 1 | |
| G10006-15 | Thrust Reverser Plug Eqpt | 4 | |
| G10006-3 | RH Plug Assy | 1 | |
| G150-210 | EXHAUST PLUGS (set of 2) | 1 | |
| G2-107 | APU EXHAUST PLUG | 1 | |
| G200-210 | EXHAUST PLUGS (G200) (set of 2) | 1 | |
| G200-212 | EXHAUST PLUGS, folding type (G280) (set of 2) | 1 | |
| G20002-1 | RETAINER - KEYING POST, SPRING LATCH REMOVAL, AMP213408 PLUG MODULE | 1 | |
| G26001-94 | SHORTING PLUG ASSY | 1 | |
| G26009-10 | Hose Plug Assembly | 1 | |
| G26009-9 | Hose Plug Assembly | 1 | |
| G26009-94 | 3/8"HOSE PLUG ASSY | 1 | |
| G26009-95 | 3/4"HOSE PLUG ASSY | 1 | |
| G27106-1 | SPANNER WRENCH - REMOVAL/INSTALLATION, CANOE FAIRING AERO PLUGS | 3 | |
| G28009 | PLUG EQUIPMENT -0 HORIZONTAL STABILIZER/APU FUEL | 1 | |
| G28009-1 | PLUG EQUIPMENT - HORIZONTAL STABILIZER/APU FUEL TRANSFER SHROUDS AND DRAIN LINES | 1 | |
| G28009-24 | PLUG EQUIPMENT - HORIZONTAL STABILIZER/APU FUEL TRANSFER SHROUDS AND DRAIN LINES | 6 | |
| G29005-3 | CASE DRAIN HOSE PLUG ASSY | 1 | |
| G29005-4 | Outlet Hose Plug Assy | 1 | |
| G29005-5 | INLET HOSE PLUG ASSY | 1 | |
| G29011-1 | PLUG SET - PRESSURE AND FLUSH TEST, HYDRAULIC RESERVOIR ASSEMBLY | 1 | |
| G2A-200 | EXHAUST PLUG | 1 | |
| G32023-59 | RELIEF VALVE PLUG- ACTUATOR, TRUCK POS. MLG (G32023-57 INCLUDED IN THE G32023-59) | 2 | |
| G346 | Plug gauge,handtool | 2 | |
| G347 | Plug gauge,handtool | 2 | |
| G348 | Plug gauge,handtool | 2 | |
| G36019 | PLUG -0 DUCT PRESSURE TEST (DUCTS WITH 65B94822 | 1 | |
| G36019-1 | PLUG - DUCT PRESSURE TEST (DUCTS WITH 65B94822 FITTINGS) | 1 | |
| G36020 | PLUG EQUIPMENT -0 DUCT TEST (20 MACHINED | 1 | |
| G36020-18 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | 1 | |
| G36020-19 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | 1 | |
| G36020-20 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | 1 | |
| G36020-21 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | 1 | |
| G36020-215 | PLUG - HYDROSTATIC | 1 | |
| G36020-22 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | 1 | |
| G36020-23 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | 1 | |
| G36020-24 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | 1 | |
| G36020-25 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | 1 | |
| G36020-26 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | 1 | |
| G36020-27 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | 1 | |
| G36020-28 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | 1 | |
| G36020-29 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | 1 | |
| G36020-30 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | 1 | |
| G36020-31 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | 1 | |
| G36020-32 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | 1 | |
| G36020-33 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | 1 | |
| G36020-34 | PLUG EQUIPMENT - DUCT TEST (208 MACHINED FLANGES) | 1 | |
| G36023 | PLUG -0 PNEUMATIC DUCT, HYDROSTATIC TEST | 1 | |
| G36023-1 | PLUG - PNEUMATIC DUCT, HYDROSTATIC TEST | 1 | |
| G36026 | PLUG EQPT -0 PNEUMATIC DUCT, HYDROSTATIC TEST | 1 | |
| G36026-1 | PLUG EQUIPMENT - PNEUMATIC DUCT, HYDROSTATIC TEST | 1 | |
| G36028 | PLUG -0 PNEUMATIC DUCT, HYDROSTATIC TEST | 1 | |
| G36028-1 | PLUG - PNEUMATIC DUCT, HYDROSTATIC TEST | 1 | |
| G36029 | PLUG -0 PNEUMATIC DUCT, HYDROSTATIC TEST | 1 | |
| G36029-1 | PLUG - PNEUMATIC DUCT, HYDROSTATIC TEST | 1 | |
| G36030 | PLUG -0 PNEUMATIC DUCT, HYDROSTATIC TEST | 1 | |
| G36030-1 | PLUG - PNEUMATIC DUCT, HYDROSTATIC TEST | 1 | |
| G4-106 | INTAKE PLUGS (folding type) WITH CUSTOM STORAGE BAG (set of 3) | 1 | |
| G4-110 | EXHAUST PLUGS (G-IV) (folding type) (set of 2) | 1 | |
| G4-111 | EXHAUST PLUGS (G-IV) (folding type) WITH CUSTOM STORAGE BAG (set of 3) | 1 | |
| G4-112 | EXHAUST PLUGS (G450) (folding type) (set of 2) | 1 | |
| G4-113 | EXHAUST PLUGS (G450) (folding type) WITH CUSTOM STORAGE BAG (set of 3) | 1 | |
| G4-115 | CUSTOM STORAGE BAGS FOR FOLDING INTAKE & EXHAUST PLUGS (set of 2) | 1 | |
| G5-120 | EXHAUST PLUGS (folding type), NSN 1730-01667-2949 (set of 2) | 1 | |
| G5-130 | APU EXHAUST PLUG, NSN 1730-01-667-2956 | 1 | |
| G5-805 | STORAGE DUFFLE for EXHAUST PLUG SET | 1 | |
| G5M5M0-116-0000 | SETTING TOOL - MICROSWITCH UNIT OR CABLE ADAPTER PLUG & OHMMETER (RANGE >1K OHM) | 1 | |
| G600-100013-1 | APU EXHAUST PLUG | 2 | |
| G600-100025-1 | PLUG, ENVIRONMENT CONTROLUNIT EXHAUST | 3 | |
| G600-100025-1 | ECU EXHAUST PLUG | 3 | |
| G600-240011-1 | PLUG - ADG DEPLOYMENT SHORTING | 1 | |
| G601-100006-19 | PLUG, APUEXHAUST | 2 | |
| G601-100006-19 | APU EXHAUST PLUG | 2 | |
| G601-100007-1 | Plug - Heat Exchanger Exhaust | 1 | |
| G601-100007-19 | PLUG- HEAT EXCHANGER EXHAUST | 2 | |
| G601-100007-19 | PLUG, HEAT EXCHANGER, EXHAUST | 2 | |
| G601-100010-1 | Plug - Engine Exhaust | 5 | |
| G601-100010-1 | ENG EXHAUST PLUG | 5 | |
| G601R101207-1 | PLUG - ECU EXHAUST | 9 | |
| G601R101207−1 | Plug Assy − ECU Exhaust | 9 | |
| G601R101209 1 | PLUG ASSY APU EXHAUST | 5 | |
| G601R101209-1 | PLUG - APU EXHAUST | 5 | |
| G601R101209−1 | Plug Assy − APU Exhaust | 5 | |
| G601R101217-1 | PLUG - APU COOLING EXHAUST (APPL. SB601R-49- | 3 | |
| G601R101217−1 | Plug Assy − APU Cooling Exhaust | 3 | |
| G601R101219−1 | Plug − Engine Exhaust (Optional) | 7 | |
| G601R242303-1 | SHORTING PLUG | 7 | |
| G601R242303−1 | Shorting Plug − ADG Autodeployment | 7 | |
| G601R242304-1 | SHORTING PLUG, ADG AUTO DEPLOYEMENT | 4 | |
| G601R2620002−1 | Shunt Plug−Discharger Cartridge | 1 | |
| G601R262002-1 | SHUNT PLUG DISCHARGE CARTRIDGE | 8 | |
| G601R262002−1 | SHUNT PLUG ASSEMBLY | 8 | |
| G601−100007−1 | Plug − Heat Exchanger Exhaust | 1 | |
| G601−100007−19 | Plug − Heat Exchanger Exhaust | 2 | |
| G601−100010−1 | Plug − Engine Exhaust | 5 | |
| G69010001-1 | BLANKS/PLUGS - AIR INLET AND EXHAUST | 1 | |
| G7-120 | EXHAUST PLUGS, folding type (G500, PW814GA Series) (set of 2) | 1 | |
| G7-121 | EXHAUST PLUGS, folding type (G400, PW812GA Series) (set of 2) | 1 | |
| G700-101209-1 | Plug - Apu Exhaust | 1 | |
| G700-101214-1 | Plug - Ecu Exhaust | 1 | |
| G700-101233 | Plug - Ecu Exhaust | 1 | |
| G700-101233-1 | PLUG - ECU EXHAUST | 1 | |
| G700050345 | G700050345;Mag Mount RF Omni Antenna 617-960/1700-6000 MHz 8 ft. LL-195 with N-plug | 1 | |
| GA31150 | THERMAL RELIEF PLUG | 1 | |
| GB1-105 | EXHAUST PLUGS (set of 2) | 1 | |
| GD-D1016-51PL-12 | PLUG, ATTACHMENT | 1 | |
| GE90 STAND | PLUG - DISCHARGE, ENGINE FAN THRUST REVERSER AIR | 1 | |
| GE90-905B | PLUG - DISCHARGE, ENGINE FAN THRUST REVERSER AIR | 1 | |
| GEX-102 | EXHAUST PLUGS, folding type (set of 2) | 1 | |
| GEX-270 | APU EXHAUST PLUG | 1 | |
| GEX-800 | STORAGE BAGS FOR Intake Plug Set, heavy duty type, w/ tail number imprint (set of 2) | 1 | |
| GEX-805 | STORAGE BAG for EXHAUST PLUG SET | 1 | |
| GMIOTT010-1 | PLUGS TYPE J (HEATCON) | 1 | |
| GNA-200 | EXHAUST PLUG (folding type) | 1 | |
| GRIMMA63-220/380 | 3 PHASE PLUG | 1 | |
| GS1 | GROUND CREW HEADSET WITH CABLE HARDWIRED AND 15 FT COILED CORD W/PPT 1/4'' PLUG | 1 | |
| GS1 GROUND CREW HEADSET | GROUND CREW HEADSET WITH CABLE HARDWIRED AND 15 FT COILED CORD W/PPT 1/4'' PLUG | 1 | |
| GS10323 | PLUG SHIPPING | 1 | |
| GS10365 | PLUG SHIPPING | 1 | |
| GS10365-2 | PLUG SHIPPING | 1 | |
| GS10414-4 | PLUG, SHIPPING | 1 | |
| GS10414-5 | PLUG, SHIPPING | 2 | |
| GS10414-6 | PLUG, SHIPPING | 1 | |
| GS10748 | ADJUSTING PLUG WRENCH | 1 | |
| GS10748-1 | WRENCH - ADJUSTING PLUG | 1 | |
| GS13789-1 | Turbine Housing Plug | 1 | |
| GS14597-1 | WRENCH PLUG LIMITER VA | 1 | |
| GS15580-1 | REMOVE AND INSTALL THE BLADE BORE PLUG | 4 | |
| GS20400-1 | HUB REAR PLUG | 1 | |
| GS24009-19 | TEST PLUG - HAMILTON | 1 | |
| GS47219 | PLUG,WASHER | 1 | |
| GS47220 | WASHER-SPECIAL TOOL FOR PLUG | 1 | |
| GSE1000545 | RIGHT RAM AIR SCOOP PLUG ASSEMBLY (1159SEMP20298)- | 1 | |
| GSE1000569 | AUXILIARY POWER UNIT EXHAUST PLUG ASSEMBLY-GSE1000569 | 1 | |
| GSE431 | PLUG LEAKAGE TEST ASSY-SHROUD APU | 1 | |
| H-10 PRO | BACHARACH H-10 PRO REFRIGERANT LEAK DETECTOR WITH CHARGER (N.AMERICAN PLUG ONLY) CATALOG# 3015-8004 | 1 | |
| H-2232 | PLUG, KOHLER SPARK | 1 | |
| H10-13-4 | HEADSET, TWIN PLUGS, STRAIGHT LEAD | 5 | |
| H10-13.4 | HEADSET, TWIN PLUGS, STRAIGHT LEAD | 5 | |
| H10-13H | HELICOPTER HEADSET C/W MOLDED US NATO PLUG | 2 | |
| H10-30 | HEADSET, TWIN PLUGS, DYNAMIC AMPLIFIED MIC | 8 | |
| H10-66 | HELICOPTER HEADSET-C/W US NATO PLUG/DUAL | 4 | |
| H1X6003 | PLUG T/R EXH L/H | 1 | |
| H200-200 | EXHAUST PLUG | 1 | |
| H2232 | SPARK PLUG: ENGINE, KOHLER | 1 | |
| H25-IR | PLUG, HYDROSTATIC TEST PLUG, FILL FITTING | 1 | |
| H3310 | HEADPHONE - 600 OHM, WITH 1/4 INCH MONO RCA AUDIO PLUG | 10 | |
| H3312 | STD-1390 Headphone - 600 Ohm, with 1/4 Inch Mono RCAAudio Plug | 13 | |
| H400-100 | INTAKE/EXHAUST PLUGS (VIPER ENGINES) (set of 4) | 1 | |
| H400-111 | INTAKE COVERS/EXHAUST PLUGS SET (Viper Engines) (set of 4) | 1 | |
| H47015 | TEST PLUG FOR THE PRESSURE INDICATOR VALVE ASSEMBLY (3-120C) | 6 | |
| H47015 3/120C | TEST PLUG FOR THE PRESSURE INDICATOR VALVE | 1 | |
| H47797 | WRENCH FOR PLUG | 1 | |
| H800-108 | ENGINE INLET/EXHAUST PLUGS (set of 4) | 1 | |
| H800-109 | EXHAUST PLUGS (set of 2) | 1 | |
| HA-51-000-TT0262 | PLUG, ECS EXHAUST | 4 | |
| HA51−000TT0262 | Plug − ECS Exhaust | 4 | |
| HBL5266C | HUBBELL WIRING DEVICE-KELLEMS HBL5266C Straight Blade Male Plug, 15A, IP20 Rated, 3 Contacts | 1 | |
| HC060120E51S | HEAT BLANKETS 6 X 12 IN, 120V 360W WITH 5' LEADS WITH HCXS1201 PLUG INSTALLED | 1 | |
| HC080080E52E1 | FLEXI HEATER BLANKET,8"X8"-220V-320W-MOSITE-5"LEADS-NO PLUG | 1 | |
| HC090120E52 | HEATER BLANKET-220V-5"LEADS-N-PLUG | 1 | |
| HC090120E52B2 | HEATER BLANKET-220V-5"LEADS-N-PLUG | 1 | |
| HC090360E52E1T | HEAT BLANKET, 9" X 36", 5' LEADS, 5WSI, 220V, MOSITE STRETCH, HCS1207 TWIST LOCK 15AMP PLUG INSTALLED. | 1 | |
| HC100100E52 | HEATER BLANKET, 10"X10", 220V-500W,5"LEADS-NO PLUG | 1 | |
| HC100100E52E1 | FKEXI HEATER BLANKET,10"X10"-220V-500W-MOSITE-5"LEADS-NO PLUG | 1 | |
| HC120120E52B2 | HEATER BLANKET, 10"X10", 220V-500W,5"LEADS-NO PLUG | 1 | |
| HC120240E51S | HEAT BLANKET 12" X 24" 120 V 1440 W, 5' LEADS W/HCS1201 PLUG INSTALLED | 1 | |
| HC120400E52E1T | HEAT BLANKET, MOSITES, 12? X 40?, 220V, 5WSI, 2400W, 5' LEADS W/ HCS1207 TWIST LOCK PLUG (NEMA L6-15P) INSTALLED | 1 | |
| HC120960E54T1 | HEAT BLANKET 12" X 96", 240V, 5760W, 5' LEADS WITH 30 AMP TWIST LOCK PLUG ** | 1 | |
| HC150150E52E1 | FLEXI HEATER BLANKET-MOSITE,15"X15"-220V01125W05"LEADS-NO PLUG | 1 | |
| HC150150E52E1B2 | FLEXI HEATER BLANKET-MOSITE,15"X15"-220V01125W05"LEADS-NO PLUG | 1 | |
| HC160480E51Z2T1 | HEAT BLANKETS 16 X 48 IN. WITH 5' LEADS, 5WSI, 120V, 1920W PER ZONE, 3840W TOTAL, DUAL ZONE, HCS1205 TWIST LOCK PLUG INSTALLED PER ZONE | 1 | |
| HC180180E52E1 | FLEXI HEATER BLANKET,18"X18"-220V-1620W-MOSITE-5"LEADS- NO PLUG | 1 | |
| HC180180E52E1B2 | FLEXI HEATER BLANKET,18"X18"-220V-1620W-MOSITE-5"LEADS- NO PLUG | 1 | |
| HC21739 | TORQUE CHECK PLUG | 1 | |
| HC21740 | CHECK PLUG | 1 | |
| HC21740/2 | TORQUE CHECK PLUG | 1 | |
| HC21741 | TORQUE CHECK PLUG | 1 | |
| HC21742 | TORQUE CHECK PLUG | 1 | |
| HC22845 | TORQUE CHECK PLUG | 1 | |
| HC737130G42Z2 | BOEING 707/727/737 RADOME HEATER BLANKET 220V PLUS PLUGS | 1 | |
| HCS1201 | STRAIGHT BLADE PLUGS | 1 | |
| HCS1202 | Straight Blade Plug | 4 | |
| HCS1353 | THERMOCOUPLE PLUG TYPE "J" | 1 | |
| HCS1355 | MINI- THERMOCOUPLE PLUG | 1 | |
| HCS2010-25 | TC, TYPE J TEFLON, RED, 10FT, MOLDED PLUG, 24 AWG WITH STD SIZE PLUG, STRAIN RELIEF, 1/4" PARALLEL B | 2 | |
| HCS9000-70-145 | INPUT POWER CABLE WITH PLUG | 1 | |
| HCSP-27-PT | HOLLOW TAPERED PULL PLUGS | 1 | |
| HCU5035 | Thread Plug Gauge | 1 | |
| HCU5036 | Thread Plug Gauge | 1 | |
| HCU5037 | Thread Plug Gauge | 1 | |
| HCU5038 | Thread Plug Gauge | 1 | |
| HCU5039 | Thread Plug Gauge | 1 | |
| HCU5040 | Thread Plug Gauge | 1 | |
| HCY-120 | EXHAUST PLUG | 1 | |
| HD410K2 | HEADPHONE – 600 OHM WITH ¼ INCH MONO AUDIO PLUG | 1 | |
| HE50300-1 | APU PLUG - 3 PIN ( HE50300-1 ) | 1 | |
| HEL144204 | THREAD PLUG GAUGE | 1 | |
| HEL14422 | THREAD PLUG GAUGE | 1 | |
| HEL14432 | THREAD PLUG GAUGE 8 36UNF | 1 | |
| HEL368804 | THREAD PLUG GAUGE 4 40 | 1 | |
| HEL36882 | THREAD PLUG GAUGE | 1 | |
| HEL36943 | THREAD PLUG GAUGE | 1 | |
| HIX6002 | HALF PLUG, RIGHT-THRUST REVERSER | 11 | |
| HIX6003 | HALF PLUG, LEFT-THRUST REVERSER | 10 | |
| HIX6003-0G | HALF PLUG, LEFT-THRUST REVERSER | 3 | |
| HJET-100 | ENGINE INTAKE COVERS & EXHAUST PLUGS (set of 4) | 1 | |
| HJET-110 | ENGINE INTAKE PLUGS & EXHAUST PLUGS (set of 6) | 1 | |
| HJET-130 | EXHAUST PLUGS (set of 2) | 1 | |
| HP-10 | BUTTON HOLE PLUG | 4 | |
| HS7544 | MECHANICAL PULLER - TEST FLOW PLUG, PUMP HOUSING | 1 | |
| HS7723 | PLUG MACHINE TH | 1 | |
| HSE757-0010-7 | SLING WINGLET - ADAPTER PLUG HOIST | 2 | |
| HSF-100 | EXHAUST PLUGS (set of 18) | 1 | |
| HTE714-85-H | EATON HTE COUPLING PLUG | 1 | |
| HTL PN31001615 | CARTIDGE SHUNT PLUG | 1 | |
| HTL30800306 | SHUNT PLUG-FIRE EXTENGUSHER | 1 | |
| HTL 31001615 | CARTIDGE SHUNT PLUG | 1 | |
| HU19036-1 | EXTRACTOR - BORESCOPE PLUG, IMPACT (SLIDE HAMMER) | 13 | |
| HU24461 | TORQUE CHECK PLUG | 3 | |
| HU24462 | TORQUE CHECK PLUG | 3 | |
| HU24463 | TORQUE CHECK PLUG | 3 | |
| HU24464 | TORQUE CHECK PLUG | 3 | |
| HU24465 | TORQUE CHECK PLUG | 3 | |
| HU24466 | TORQUE CHECK PLUG | 3 | |
| HU24467 | TORQUE CHECK PLUG | 3 | |
| HU24468 | TORQUE CHECK PLUG | 3 | |
| HU28096-1 | IGNITOR PLUG DEPTH GAUGE TOOL | 10 | |
| HU28096/1 | GAUGE - PROTRUSION, IGNITER PLUG, RB211-524G/H ENGINES | 10 | |
| HU38434 | GAGE -PROTRUSION, IGNITER PLUG (MEASURE, IGNITER PLUG IMMERSION DEPTHS) | 3 | |
| HU39037-1 | IGNITOR PLUG DEPTH GAUGE TOOL | 14 | |
| HU51166 | ADAPTOR - EXTRACTOR - BORESCOPE PLUGS HP & IP COMPRESSOR | 5 | |
| HU56474 | BAG MVP - MPS STAND BARE ENGINE- NO FLIGHT INTAKE, NO EXHAUST PLUG FITTED. | 3 | |
| HUN-105 | EXHAUST PLUG | 1 | |
| HUR-102 | EXHAUST PLUGS (set of 12) | 1 | |
| HW63939 | TAP:IGNITOR PLUG THREADS | 1 | |
| HW64308 | PIN: SETTING IGNITOR PLUG HELICOIL | 1 | |
| HW64309 | DRIVER:IGNITOR PLUG HELICOIL DT2 | 1 | |
| HYD-CAP-PRESSURE | CAPS AND PLUGS FOR HYD LINES | 1 | |
| IAE 1P17766 | IAE 1P17766 METERING PLUG HOLDER | 1 | |
| IAE 2R19624 | TORQUE CHECK PLUG | 1 | |
| IAE 2R19651 | TORQUE CHECK PLUG | 1 | |
| IAE 4P17607 | ADAPTOR PLUG FOR HYD. PUMP | 1 | |
| IAE-200 | EXHAUST PLUG, equivalent to IAE P/N: IAE1N20008 (each) for Airbus A319/A320/A321 | 1 | |
| IAE1J13400 | WRENCH-FUEL PLUG | 15 | |
| IAE1P16055 | LOCATOR, PLUG LHT Dwg No.(537250161) | 1 | |
| IAE1P16184 | PULLER, KNOCKER HPT BOROSCOPE PLUG | 16 | |
| IAE1P17766 | HOLDER, METERING PLUG | 1 | |
| IAE1P18184 | PULLER, HPT BOROSCOPE PLUG | 1 | |
| IAE1P6184 | KNOCK HPT BOROSCOPE PLUG | 1 | |
| IAE2F10055 | PLUG, VACUUM CHECK | 1 | |
| IAE4P17607 | ADAPTOR PLUG FOR HYD. PUMP | 1 | |
| INHPLUG12 | INHIBITOR PLUG 12GA | 1 | |
| INHPLUGXL | INHIBITOR SUPER PLUG | 1 | |
| IX54176702 | DRIFT/THRUST PLUG | 1 | |
| J10001 | PLUG SET-VENT,THERMAL ANTI-ICING EXHAUST | 1 | |
| J10001-01 | PLUG SET -0 VENT, THERMAL ANTI-ICING EXHAUST | 1 | |
| J10001-02 | PLUG SET -0 VENT, THERMAL ANTI-ICING EXHAUST | 1 | |
| J10001-1 | PLUG SET - VENT, THERMAL ANTI-ICING EXHAUST | 8 | |
| J10001-10 | PLUG WITH HOLES | 1 | |
| J10001-13 | PLUG SET - VENT, THERMAL ANTI-ICING EXHAUST | 1 | |
| J10001-14 | PLUG SET - VENT, THERMAL ANTI-ICING EXHAUST | 4 | |
| J10001-15 | Plug Set -Vent. Thermal Anti-Icing Exhaust | 1 | |
| J10001-2 | PLUG SET - VENT, THERMAL ANTI-ICING EXHAUST | 5 | |
| J10001-25 | PLUG SET - VENT, THERMAL ANTI-ICING EXHAUST | 8 | |
| J10001-29 | PLUG WITH HOLES | 1 | |
| J10001-3 | Plug Set - Vent, Thermal Anti-Icing | 1 | |
| J10001-4 | PLUG SET VENT THEMAL | 1 | |
| J200-115 | ENGINE PLUGS, 2 NACA's on left, 1 NACA on right cowl (set of 6) | 1 | |
| J200-116 | ENGINE PLUGS, 2 NACA's on left, 2 NACA on right cowl (set of 7) | 1 | |
| J200-117 | EXHAUST PLUG | 1 | |
| J250-115 | ENGINE PLUGS, 2 NACA's on lft, 1 NACA on right cowl (set of 6) | 1 | |
| J250-116 | ENGINE PLUGS, 2 NACA's on lft, 2 NACA on right cowl (set of 7) | 1 | |
| J26007-1 | TEST BOX - CARGO SMOKE HEATER, TEST PLUG | 7 | |
| J29005-1 | PLUG SET - PRESSURE TEST, HYDRAULIC RESERVOIR ASSEMBLY | 1 | |
| J29005-30 | PLUG SET - PRESSURE TEST, HYDRAULIC RESERVOIR ASSEMBLY | 1 | |
| J32014-65 | LEFT HAND PLUG | 1 | |
| J32014-66 | RIGHT HAND PLUG | 1 | |
| J32054-21-ML | PLUG, LESS HEAT TREAT AND | 1 | |
| J38004-202 | Flush plug cap | 1 | |
| J46050 | HOLDING PLATE PLUGS | 1 | |
| J47215 | WRENCH TIGHTENING PLUG | 1 | |
| J47544 | PLUG USED WITH EXTRACTOR | 1 | |
| J78007 | Sling - Exhaust Sleeve & Plug | 1 | |
| J78007-104 | REMOVAL/INSTALLATION EQUIPMENT - EXHAUST SLEEVE AND PLUG | 5 | |
| J78007-58 | REMOVAL/INSTALLATION EQUIPMENT - EXHAUST SLEEVE AND PLUG (CE) | 5 | |
| J78007-74 | REMOVAL/INSTALLATION EQUIPMENT - EXHAUST SLEEVE AND PLUG (CE) | 2 | |
| J78007-85 | REMOVAL/INSTALLATION EQUIPMENT - EXHAUST SLEEVE AND PLUG (CE) | 10 | |
| J78039-1 | Crsdle and sling-exhaust sleeve and plug | 1 | |
| JB-BBJ-APU-K | APU INTAKE/EXHAUST/COOLING PLUG | 1 | |
| JGP12 | Ionic Systems John Guest Plug 12mm, Red | 2 | |
| JL-2PLUS/OL-1 | 220V Battery charger UK & EURO plug | 2 | |
| JPR-200 | EXHAUST PLUG | 1 | |
| K 349 | K 349;Mains Cable Straight Line European Plug | 1 | |
| K 735 | K 735;Mains Cable Straight Line Australian NZ Plug | 2 | |
| K 780 | K 780;Mains Cable Straight Line UK Standard Plug | 1 | |
| K 781 | K 781;Mains Cable Straight Line US Plug | 1 | |
| K10004 | PLUG EXHAUST VENT THERMAL ANTI ICING | 1 | |
| K10004-1 | PLUG SET - EXHAUST VENT, THERMAL ANTI-ICING | 2 | |
| K10004-10 | PLUG SET-EXHAUST VENT,THERMAL ANTI-ICING | 1 | |
| K10004-11 | PLUG SET-EXHAUST VENT,THERMAL ANTI-ICING | 1 | |
| K10004-14 | PLUG SET-EXHAUST VENT,THERMAL ANTI-ICING | 1 | |
| K10004-16 | PLUG SET-EXHAUST VENT,THERMAL ANTI-ICING | 1 | |
| K10004-1 upgrade to K10004-39 | Plug set-exhaust vent，thermal anti-icing | 1 | |
| K10004-2 | PLUG SET-EXHAUST VENT,THERMAL ANTI-ICING | 1 | |
| K10004-24 | PLUG SET - EXHAUST VENT, THERMAL ANTI-ICING | 3 | |
| K10004-39 | PLUG SET - EXHAUST VENT, THERMAL ANTI-ICING | 4 | |
| K10004-4 | PLUG SET-EXHAUST VENT,THERMAL ANTI-ICING | 1 | |
| K10004-5 | PLUG SET-EXHAUST VENT,THERMAL ANTI-ICING | 1 | |
| K10004-7 | PLUG - VENT, THERMAL ANTI-ICING | 1 | |
| K10004-9 | PLUG SET-EXHAUST VENT,THERMAL ANTI-ICING | 1 | |
| K10008- | PROTECTIVE PLUG EQPT-THRUST REVERSER EXHAUST DUCT,GE GENX | 1 | |
| K10008-1 | Engine Exhaust Plug, GEnx | 1 | |
| K10008-14 | PROTECTIVE PLUG EQUIPMENT - ENGINE EXHAUST, GE GEnx | 2 | |
| K10008-2 | PROTECTIVE PLUG EQPT-THRUST REVERSER EXHAUST DUCT,GE GENX | 1 | |
| K10008-23 | PROTECTIVE PLUG EQUIPMENT - ENGINE EXHAUST, GE GEnx | 7 | |
| K10008-24 | Exhaust Plug - Genx | 1 | |
| K10008-4 | PROTECTIVE PLUG EQPT-THRUST REVERSER EXHAUST DUCT,GE GENX | 1 | |
| K10009-1 | PROTECTIVE PLUG EQUIPMENT - THRUST REVERSER EXHAUST DUCT, GENERAL ELECTRIC GEnx | 1 | |
| K10009-15 | PROTECTIVE PLUG EQUIPMENT - THRUST REVERSER EXHAUST DUCT, GENERAL ELECTRIC GEnx | 9 | |
| K10009-15 | PROTECTIVE PLUG EQPT-THRUST REVERSER EXHAUST DUCT,GE GENX | 9 | |
| K10009-16 | LH Plug Assy | 1 | |
| K10009-17 | RH Plug Assy | 1 | |
| K10009-3 | LH Plug Assy | 1 | |
| K10009-4 | RH Plug Assy | 1 | |
| K10012-1 | 787 EXHAUST PLUG EQUIPMENT TOOL | 1 | |
| K10012-14 | PROTECTIVE PLUG EQUIPMENT - ENGINE EXHAUST, RR TRENT 1000 | 5 | |
| K10012-2 | 787 EXHAUST PLUG EQUIPMENT TOOL | 1 | |
| K10013-1 | 787 THRUST REV. EXHAUST PLUG TOOL | 1 | |
| K10013-15 | PROTECTIVE PLUG EQUIPMENT - THRUST REVERSER EXHAUST DUCT, RR TRENT 1000 | 6 | |
| K10013-3 | 787 THRUST REV. EXHAUST PLUG TOOL | 1 | |
| K21018-6 | HOSE PLUG ASSY TOOL | 1 | |
| K26003-31 | Bulkhead plug assy | 1 | |
| K26003-37 | 7/8-INCH PLUG ASSEMBLY | 1 | |
| K26003-60 | 3/4 Inch Plug Assy | 1 | |
| K26003-61 | 1/2-INCH PLUG ASSEMBLY | 2 | |
| K29005-1 | DISPATCH PLUG JUMPER RAM AIR | 6 | |
| K38002-1 | DISPATCH PLUG - VACUUM WASTE TOILET BOWL | 11 | |
| K38002-1 | DISPATCH PLUG-VACUUMWASTE TOILET BOWL | 11 | |
| K500HKP | PLUG ASSY HD BRASS | 1 | |
| K501HKP | PLUG ASSY HD BRASS | 1 | |
| K502HKP | PLUG ASSY HD BRASS | 1 | |
| K503HKP | PLUG ASSY HD BRASS | 1 | |
| K504HKP | PLUG ASSY HD BRASS | 1 | |
| K505HKP | PLUG ASSY HD BRASS | 1 | |
| K506HKP | PLUG ASSY HD BRASS | 1 | |
| K507HKP | PLUG ASSY HD BRASS | 1 | |
| K508HKP | PLUG ASSY HD BRASS | 1 | |
| K509HKP | PLUG ASSY HD BRASS | 1 | |
| K510HKP | PLUG ASSY HD BRASS | 1 | |
| K511HKP | PLUG ASSY HD BRASS | 1 | |
| K512HKP | PLUG ASSY HD BRASS | 1 | |
| K513HKP | PLUG ASSY HD BRASS | 1 | |
| K514HKP | PLUG ASSY HD BRASS | 1 | |
| K515HKP | PLUG ASSY HD BRASS | 1 | |
| K516HKP | PLUG ASSY HD BRASS | 1 | |
| K517HKP | PLUG ASSY HD BRASS | 1 | |
| K519HKP | PLUG ASSY HD BRASS | 1 | |
| K520HKP | PLUG ASSY HD BRASS | 1 | |
| K521HKP | PLUG ASSY HD BRASS | 1 | |
| K522HKP | PLUG ASSY HD BRASS | 1 | |
| K523HKP | PLUG ASSY HD BRASS | 1 | |
| K524HKP | PLUG ASSY HD BRASS | 1 | |
| K525HKP | PLUG ASSY HD BRASS | 1 | |
| K526HKP | PLUG ASSY HD BRASS | 1 | |
| K527HKP | PLUG ASSY HD BRASS | 1 | |
| K528HKP | PLUG ASSY HD BRASS | 1 | |
| K529HKP | PLUG ASSY HD BRASS | 1 | |
| K530HKP | PLUG ASSY HD BRASS | 1 | |
| K531HKP | PLUG ASSY HD BRASS | 1 | |
| K532HKP | PLUG ASSY HD BRASS | 1 | |
| K533HKP | PLUG ASSY HD BRASS | 1 | |
| K534HKP | PLUG ASSY HD BRASS | 1 | |
| K535HKP | PLUG ASSY HD BRASS | 1 | |
| K537HKP | PLUG ASSY HD BRASS | 1 | |
| K538HKP | PLUG ASSY HD BRASS | 1 | |
| K539HKP | PLUG ASSY HD BRASS | 1 | |
| K540HKP | PLUG ASSY HD BRASS | 1 | |
| K541HKP | PLUG ASSY HD BRASS | 1 | |
| K542HKP | PLUG ASSY HD BRASS | 1 | |
| K543HKP | PLUG ASSY HD BRASS | 1 | |
| K544HKP | PLUG ASSY HD BRASS | 1 | |
| K545HKP | PLUG ASSY HD BRASS | 1 | |
| K546HKP | PLUG ASSY HD BRASS | 1 | |
| K547HKP | PLUG ASSY HD BRASS | 1 | |
| K548HKP | PLUG ASSY HD BRASS | 1 | |
| K549HKP | PLUG ASSY HD BRASS | 1 | |
| K550HKP | PLUG ASSY HD BRASS | 1 | |
| K551HKP | PLUG ASSY HD BRASS | 1 | |
| K552HKP | PLUG ASSY HD BRASS | 1 | |
| K553HKP | PLUG ASSY HD BRASS | 1 | |
| K554HKP | PLUG ASSY HD BRASS | 1 | |
| K555HKP | PLUG ASSY HD BRASS | 1 | |
| K556HKP | PLUG ASSY HD BRASS | 1 | |
| K557HKP | PLUG ASSY HD BRASS | 1 | |
| K558HKP | PLUG ASSY HD BRASS | 1 | |
| K559HKP | PLUG ASSY HD BRASS | 1 | |
| K560HKP | PLUG ASSY HD BRASS | 1 | |
| K561HKP | PLUG ASSY HD BRASS | 1 | |
| K562HKP | PLUG ASSY HD BRASS | 1 | |
| K563HKP | PLUG ASSY HD BRASS | 1 | |
| K565HKP | PLUG ASSY HD BRASS | 1 | |
| K566HKP | PLUG ASSY HD BRASS | 1 | |
| K567HKP | PLUG ASSY HD BRASS | 1 | |
| K568HKP | PLUG ASSY HD BRASS | 1 | |
| K569HKP | PLUG ASSY HD BRASS | 1 | |
| K570HKP | PLUG ASSY HD BRASS | 1 | |
| K571HKP | PLUG ASSY HD BRASS | 1 | |
| K572HKP | PLUG ASSY HD BRASS | 1 | |
| K573HKP | PLUG ASSY HD BRASS | 1 | |
| K574HKP | PLUG ASSY HD BRASS | 1 | |
| K575HKP | PLUG ASSY HD BRASS | 1 | |
| K577HKP | PLUG ASSY HD BRASS | 1 | |
| K578HKP | PLUG ASSY HD BRASS | 1 | |
| K579HKP | PLUG ASSY HD BRASS | 1 | |
| K580HKP | PLUG ASSY HD BRASS | 1 | |
| K581HKP | PLUG ASSY HD BRASS | 1 | |
| K582HKP | PLUG ASSY HD BRASS | 1 | |
| K583HKP | PLUG ASSY HD BRASS | 1 | |
| K584HKP | PLUG ASSY HD BRASS | 1 | |
| K585HKP | PLUG ASSY HD BRASS | 1 | |
| K586HKP | PLUG ASSY HD BRASS | 1 | |
| K587HKP | PLUG ASSY HD BRASS | 1 | |
| K588HKP | PLUG ASSY HD BRASS | 1 | |
| K589HKP | PLUG ASSY HD BRASS | 1 | |
| K590HKP | PLUG ASSY HD BRASS | 1 | |
| K591HKP | PLUG ASSY HD BRASS | 1 | |
| K592HKP | PLUG ASSY HD BRASS | 1 | |
| K594HKP | PLUG ASSY HD BRASS | 1 | |
| K595HKP | PLUG ASSY HD BRASS | 1 | |
| K596HKP | PLUG ASSY HD BRASS | 1 | |
| K597HKP | PLUG ASSY HD BRASS | 1 | |
| K598HKP | PLUG ASSY HD BRASS | 1 | |
| K599HKP | PLUG ASSY HD BRASS | 1 | |
| K600HKP | PLUG ASSY HD BRASS | 1 | |
| K601HKP | PLUG ASSY HD BRASS | 1 | |
| K602HKP | PLUG ASSY HD BRASS | 1 | |
| K603HKP | PLUG ASSY HD BRASS | 1 | |
| K604HKP | PLUG ASSY HD BRASS | 1 | |
| K605HKP | PLUG ASSY HD BRASS | 1 | |
| K606HKP | PLUG ASSY HD BRASS | 1 | |
| K607HKP | PLUG ASSY HD BRASS | 1 | |
| K608HKP | PLUG ASSY HD BRASS | 1 | |
| K609HKP | PLUG ASSY HD BRASS | 1 | |
| K611HKP | PLUG ASSY HD BRASS | 1 | |
| K612HKP | PLUG ASSY HD BRASS | 1 | |
| K613HKP | PLUG ASSY HD BRASS | 1 | |
| K614HKP | PLUG ASSY HD BRASS | 1 | |
| K615HKP | PLUG ASSY HD BRASS | 1 | |
| K616HKP | PLUG ASSY HD BRASS | 1 | |
| K617HKP | PLUG ASSY HD BRASS | 1 | |
| K618HKP | PLUG ASSY HD BRASS | 1 | |
| K619HKP | PLUG ASSY HD BRASS | 1 | |
| K620HKP | PLUG ASSY HD BRASS | 1 | |
| K621HKP | PLUG ASSY HD BRASS | 1 | |
| K622HKP | PLUG ASSY HD BRASS | 1 | |
| K623HKP | PLUG ASSY HD BRASS | 1 | |
| K624HKP | PLUG ASSY HD BRASS | 1 | |
| K625HKP | PLUG ASSY HD BRASS | 1 | |
| K626HKP | PLUG ASSY HD BRASS | 1 | |
| K628HKP | PLUG ASSY HD BRASS | 1 | |
| K629HKP | PLUG ASSY HD BRASS | 1 | |
| K630HKP | PLUG ASSY HD BRASS | 1 | |
| K631HKP | PLUG ASSY HD BRASS | 1 | |
| K632HKP | PLUG ASSY HD BRASS | 1 | |
| K633HKP | PLUG ASSY HD BRASS | 1 | |
| K634HKP | PLUG ASSY HD BRASS | 1 | |
| K635HKP | PLUG ASSY HD BRASS | 1 | |
| K636HKP | PLUG ASSY HD BRASS | 1 | |
| K637HKP | PLUG ASSY HD BRASS | 1 | |
| K638HKP | PLUG ASSY HD BRASS | 1 | |
| K639HKP | PLUG ASSY HD BRASS | 1 | |
| K640HKP | PLUG ASSY HD BRASS | 1 | |
| K641HKP | PLUG ASSY HD BRASS | 1 | |
| K642HKP | PLUG ASSY HD BRASS | 1 | |
| K643HKP | PLUG ASSY HD BRASS | 1 | |
| K644HKP | PLUG ASSY HD BRASS | 1 | |
| K645HKP | PLUG ASSY HD BRASS | 1 | |
| K646HKP | PLUG ASSY HD BRASS | 1 | |
| K647HKP | PLUG ASSY HD BRASS | 1 | |
| K648HKP | PLUG ASSY HD BRASS | 1 | |
| K649HKP | PLUG ASSY HD BRASS | 1 | |
| K651HKP | PLUG ASSY HD BRASS | 1 | |
| K652HKP | PLUG ASSY HD BRASS | 1 | |
| K653HKP | PLUG ASSY HD BRASS | 1 | |
| K655HKP | PLUG ASSY HD BRASS | 1 | |
| K656HKP | PLUG ASSY HD BRASS | 1 | |
| K657HKP | PLUG ASSY HD BRASS | 1 | |
| K658HKP | PLUG ASSY HD BRASS | 1 | |
| K659HKP | PLUG ASSY HD BRASS | 1 | |
| K660HKP | PLUG ASSY HD BRASS | 1 | |
| K661HKP | PLUG ASSY HD BRASS | 1 | |
| K662HKP | PLUG ASSY HD BRASS | 1 | |
| K663HKP | PLUG ASSY HD BRASS | 1 | |
| K664HKP | PLUG ASSY HD BRASS | 1 | |
| K665HKP | PLUG ASSY HD BRASS | 1 | |
| K666HKP | PLUG ASSY HD BRASS | 1 | |
| K667HKP | PLUG ASSY HD BRASS | 1 | |
| K668HKP | PLUG ASSY HD BRASS | 1 | |
| K669HKP | PLUG ASSY HD BRASS | 1 | |
| K670HKP | PLUG ASSY HD BRASS | 1 | |
| K671HKP | PLUG ASSY HD BRASS | 1 | |
| K672HKP | PLUG ASSY HD BRASS | 1 | |
| K673HKP | PLUG ASSY HD BRASS | 1 | |
| K674HKP | PLUG ASSY HD BRASS | 1 | |
| K675HKP | PLUG ASSY HD BRASS | 1 | |
| K676HKP | PLUG ASSY HD BRASS | 1 | |
| K677HKP | PLUG ASSY HD BRASS | 1 | |
| K678HKP | PLUG ASSY HD BRASS | 1 | |
| K679HKP | PLUG ASSY HD BRASS | 1 | |
| K680HKP | PLUG ASSY HD BRASS | 1 | |
| K681HKP | PLUG ASSY HD BRASS | 1 | |
| K682HKP | PLUG ASSY HD BRASS | 1 | |
| K683HKP | PLUG ASSY HD BRASS | 1 | |
| K684HKP | PLUG ASSY HD BRASS | 1 | |
| K685HKP | PLUG ASSY HD BRASS | 1 | |
| K686HKP | PLUG ASSY HD BRASS | 1 | |
| K687HKP | PLUG ASSY HD BRASS | 1 | |
| K688HKP | PLUG ASSY HD BRASS | 1 | |
| K689HKP | PLUG ASSY HD BRASS | 1 | |
| K690HKP | PLUG ASSY HD BRASS | 1 | |
| K692HKP | PLUG ASSY HD BRASS | 1 | |
| K693HKP | PLUG ASSY HD BRASS | 1 | |
| K694HKP | PLUG ASSY HD BRASS | 1 | |
| K695HKP | PLUG ASSY HD BRASS | 1 | |
| K696HKP | PLUG ASSY HD BRASS | 1 | |
| K697HKP | PLUG ASSY HD BRASS | 1 | |
| K698HKP | PLUG ASSY HD BRASS | 1 | |
| K699HKP | PLUG ASSY HD BRASS | 1 | |
| KB6056 | CORE PLUG WRENCH | 1 | |
| KB6058 | CORE PLUG WRENCH | 1 | |
| KB737APUSOP | APU EXHAUST PLUG | 1 | |
| KB737APUSOP* | APU EXHAUST PLUG | 1 | |
| KC10-110 | EXHAUST/BYPASS VENT PLUGS SET for 1, 2 & 3 engines (set of 12) | 1 | |
| KC135-206 | BYPASS VENT, EXHAUST PLUGS AND NOZZLE CAP COVERS, 4 engines, R-model, CFM56 engines (set of 20) | 1 | |
| KC135-207 | BYPASS VENT & TURBINE EXHAUST PLUGS, TF-33 engines (set of 12) | 1 | |
| KC135-210 | PRE-COOLER EXHAUST PLUG, loc. above turbine exhaust outlet | 1 | |
| KC135-212 | ANTI-ICE EXHAUST PLUGS (set of 4) | 1 | |
| KC135-215 | BLEED AIR EXHAUST PLUGS, loc. inboard side on rt. engines and outboard side on lft. engines (set of 4) | 1 | |
| KC135-250 | FWD CHEEK FAIRING BCS PLUG (RC135-250) | 1 | |
| KC135-251 | FWD CHEEK FAIRING LCS SCOOP PLUG (RC135-251), Left & Right Side (set of 2) | 1 | |
| KC135-265 | ACM INLET PLUG (Co Pilot right side), w/ grommetted RBF Streamer | 1 | |
| KC135-270 | ACM EXHAUST PLUG (Pilot left side), w/ grommetted RBF Streamer | 1 | |
| KC135-275 | ACM EXHAUST PLUG (Co Pilot right side), w/ grommetted RBF Streamer | 1 | |
| KC135-280 | APU EXHAUST PLUG, R-model | 1 | |
| KC46-200 | BYPASS VENT & TURBINE EXHAUST PLUGS, PW 4062 engine (set of 6) | 1 | |
| KC46-250 | STORAGE BAGS FOR BYPASS VENT & TURBINE EXHAUST PLUGS, PW 4062 engine (set of 2) | 1 | |
| KDK-450 | HORIZ STAB LIGHTENING HOLES PLUGS (set of 4) | 1 | |
| KHC-1011-M | HYDRAULIC COUPLING KIT W/METAL DUST PLUG REPLACEMENT | 3 | |
| L1011-200 | EXHAUST PLUGS (set of 3) | 1 | |
| L12-155 | EXHAUST PLUGS (set of 2) | 1 | |
| L135M6303210 | PLUG CHIP / TEST PLUG MBG | 1 | |
| L135M63032210 | CHIP DETECTOR WEIGHT PLUG | 1 | |
| L139-125 | EXHAUST PLUGS (set of 2) | 1 | |
| L17-100 | ENGINE INLET PLUGS, not shark mouth type (set of 3) | 1 | |
| L17-101 | ENGINE INLET PLUG, shark mouth type | 1 | |
| L17-104 | VENT PLUGS, B-model, 2 of each size (set of 4) | 1 | |
| L20-103 | EXHAUST PLUGS (NO TR'S) (set of 2) | 1 | |
| L29-110 | EXHAUST PLUG | 1 | |
| L30-195 | EXHAUST PLUGS (WITH DEE HOWARD TR'S) (set of 2) | 1 | |
| L30-196 | EXHAUST PLUGS (WITH AERONCA TR'S) (set of 2) | 1 | |
| L30-197 | EXHAUST PLUGS, NO TR's (set of 2) | 1 | |
| L300-111 | FRESH AIR/OAT VENT PLUG | 1 | |
| L39-103 | AIR CONDITIONING INTAKE/EXHAUST & NACA PLUGS (set of 4) | 1 | |
| L39-200 | EXHAUST PLUG | 1 | |
| L39-201 | EXHAUST PLUG (folding type) | 1 | |
| L45-115 | INSULATED ENGINE COVERS, fully enclose the engine nacelle (w/dorsal inlet, fuel vent & air vent plugs) (set of 5) | 1 | |
| L45-190 | INTAKE/EXHAUST PLUG SET (set of 4) | 1 | |
| L45-195 | EXHAUST PLUGS (set of 2) | 1 | |
| L50-120 | EXHAUST PLUGS, folding type (set of 2) | 1 | |
| L500-105 | EXHAUST PLUGS, folding type (set of 2) | 1 | |
| L500-110 | ENGINE INLET & EXHAUST PLUG SET, folding type (set of 4) | 1 | |
| L500-111 | STORAGE BAGS, for inlet and exhaust plug set (set of 2) | 1 | |
| L500-150 | APU EXHAUST PLUG | 1 | |
| L5950 | Grease Fitting Assortments (Uses: Replacing damaged fittings, converting from plugs.) (Add to cart: Add To Cart) (Uses: For domestic & foreign cars & trucks.) (Add to cart: Add To Cart) (Uses: Most popular sizes with refillable plastic box.) (Add to cart: | 1 | |
| L60-102 | ENGINE COVERS (WITH TR'S), includes smaller plugs under nacelle (set of 10) | 1 | |
| L60-196 | EXHAUST PLUGS, folding type (set of 2) | 1 | |
| L70-110 | ENGINE INTAKE/EXHAUST PLUG SET (set of 4) | 1 | |
| LA4-120 | EXHAUST PLUG | 1 | |
| LA4-125 | EXHAUST PLUGS, LA4-200 model (set of 2) | 1 | |
| LAPR-700 | SWASH PLATE PLUG | 1 | |
| LCLPD-78-5 | THICKNESS METER CABLE FOR OLYMPUS 38DL PLUS CABLE PART # LCLPD-78-5 – FOR USE WITH MTD705 TRANSDUCER, STANDARD TYPE, DUAL LEMO MOLDED PLUG TO LEPRA/CON. 5 FT. RG178 MAKE: EVIDENT (OLYMPUS) – USA | 1 | |
| LEV-105 | BLEED AIR INTERCOOLER PLUGS (right side) (set of 2) | 1 | |
| LF240ST | PLUG-IN ADJUSTABLE-HEIGHT FREESTAND | 1 | |
| LIL58850 | OIL PAN PLUG RETHRDING KIT | 1 | |
| LIV-103 | ENGINE INLET PLUG, Wheeler Classic or PropJet (custom) (set of 4) | 1 | |
| LJ731-104 | INTAKE/EXHAUST PLUG SET (set of 8) | 1 | |
| LM508K | CANNON PLUG PLIERS WITH PINNED | 1 | |
| LMC17M87 | PLUG, ENGINE EXHAUST | 5 | |
| LMC18D84 | PLUG - THRUST REVERSER EXHAUST | 3 | |
| LMC18D84 | PLUG THRUST REVERSER EXHAUST OF PW2000 | 3 | |
| LMC18M87 | PLUGSET THRUST REV | 4 | |
| LMC19G87 | PLUG - EXHAUST - CF6-80C2 ENGINE TURBINE | 4 | |
| LMC24G87 | PLUG - DISCHARGE, CF6-80C2 ENGINE FAN THRUST REVERSER AIR | 2 | |
| LMC24G87-1 | Plug - Discharge, CF6-80C2 Engine Fan Thrust Reverser Air (LEFT) | 1 | |
| LMC24G87-2 | Plug - Discharge, CF6-80C2 Engine Fan Thrust Reverser Air (RIGHT) | 1 | |
| LP3-101 | MAIN ENGINE INLET PLUGS, heavy duty type (set of 4) | 1 | |
| LP3-102 | MAIN ENGINE INLET PLUGS, heavy duty type w/reinforced lip (set of 4) | 1 | |
| LP3-111 | OIL COOLER INLET PLUGS, heavy duty type, NSN 1730-01-525-0002 "SHIELD,AIRCRAFT GROUND SERVICING" (set of 4) | 1 | |
| LP3-120 | PITOT & PLUGS SET (2 pitot covers, 1 transducer probe cover, 2 heat exchanger inlet plugs) (set of 5) | 1 | |
| LP3-130 | UPPER NACELLE PLUGS (5th stage duct, 10th stage duct, 2 tailpipe cooling ducts) (set of 16) | 1 | |
| LP3-140 | UPPER NACELLE PLUGS (5th stage duct, 2 tailpipe cooling ducts) (NSN: 1730-01-523-3157) (set of 12) | 1 | |
| LP3-150 | EXHAUST PLUGS (set of 4) | 1 | |
| LPC14J82 | Plug - Fan Reverser, CF6-80A (Left Hand) | 2 | |
| LPC14J82-1 | PLUG - FAN REVERSER, CF6-80A (LEFT HAND) | 1 | |
| LPC14J82-2 | PLUG - FAN REVERSER, CF6-80A (RIGHT HAND) | 1 | |
| LTCT30613-01 | Oil Plug, IDG Shaft | 1 | |
| LTCT30913-01 | PLUG GUIDE SHAFT THROUGH CARBON SEAL | 1 | |
| LTCT3911 | PLUG REMOVER(INLET HOUSING ASSEMBLY) | 1 | |
| LTCT7519-01 | PLUG, MACHINE THREAD | 1 | |
| LTCT896 | Fixture, Holding, Igniter Plug | 1 | |
| M-100 | Ikeda-Lens M-100 White Flash Magnifier 10x Spark Plug Magnifier | 3 | |
| M1-GPWR | CONDITIONING CHARGER SET (90-240VAC, INTERNATIONAL PLUG SET) | 2 | |
| M10EU | HOTWEEZERS M-10 POWER SUPPLY ONLY - EU PLUG | 1 | |
| M135-112 | INTAKE/EXHAUST PLUGS, non-folding type (set of 4) | 1 | |
| M135-113 | INTAKE/EXHAUST PLUGS, folding type (set of 4) | 1 | |
| M135-115 | EXHAUST PLUGS, folding type (set of 2) | 1 | |
| M135-116 | EXHAUST PLUGS, non-folding type (set of 2) | 1 | |
| M135-200 | APU EXHAUST PLUG (-14 APU) | 1 | |
| M135-201 | APU EXHAUST PLUG (-11 APU) | 1 | |
| M15-110 | EXHAUST PLUG | 1 | |
| M17-110 | EXHAUST PLUG | 1 | |
| M170-100 | ENGINE INLET PLUG (each) | 1 | |
| M190-200 | EXHAUST PLUGS (set of 2) | 1 | |
| M190-300 | APU COVER & PLUG SET (APU Inlet, Exhaust, and Heat Exchanger) (set of 3) | 1 | |
| M20-104 | ENGINE INLET PLUGS, Southwest Texas Cowl Mod (square shape) (set of 2) | 1 | |
| M201-104 | FRESH AIR VENT PLUGS (201, 231 MODELS) (set of 2) | 1 | |
| M201-106 | FRESH AIR VENT PLUGS (for 252 MODELS ONLY) (set of 3) | 1 | |
| M21-200 | EXHAUST PLUG | 1 | |
| M28-155 | EXHAUST PLUGS (set of 4) | 1 | |
| M749243 | THREAD PLUG WRENCH | 1 | |
| M760-300 | EXHAUST PLUGS (set of 2) | 1 | |
| M83723-60 | SHUNT PLUG-FIRE EXTINGUISHER CARTRIDGE | 1 | |
| M83723-60-110AN | SHUNT PLUG - FIRE EXTINGUISHER CARTRIDGE | 19 | |
| M83723-60-18AN | SHUNT PLUG ENG FIRE BOTTLE | 16 | |
| M83723/59-112 | SQUIB - PROTECTIVE CAP (FOR THREADED PLUG SIZE 12) | 1 | |
| M83723/59-112AC | SQUIB - PROTECTIVE CAP (FOR THREADED PLUG SIZE 12) | 1 | |
| M83723/60-112AC | SHUNT PLUG | 4 | |
| M83723/60-114AC | SHUNT PLUG | 7 | |
| M83723/61-112 | SQUIB - PROTECTIVE CAP (FOR THREADED PLUG SIZE 12) STD-7463 | 1 | |
| M85049-20A | PLUG BACKSHELL | 1 | |
| MA260005-1 | PLUG KIT, ENGINE FIRE EXTINGUISHER | 1 | |
| MAG-200 | EXHAUST PLUGS (set of 2) | 1 | |
| MAP-200CGPIB-A | MAP-200CGPIB-A;MAP-200 GPIB Plug-In Option for 220C/202C/204C Chassis | 1 | |
| MAU-107 | ENGINE INLET PLUGS (small third inlet, approx. 3 x 6) (set of 3) | 1 | |
| MAU-108 | ENGINE INLET PLUGS (large third inlet, approx. 5 x 7) (set of 3) | 1 | |
| MAU-109 | ENGINE INLET PLUGS (no third inlet) (set of 2) | 1 | |
| MBBSC001 | CABLE SPECIAL WITH PROBE GUIDING PLUG | 1 | |
| MBEU58361 | PLUG, BLANKING-HPRU | 1 | |
| MBEU70169 | THREADED PLUG | 1 | |
| MC0700016 | EARTH BONDING PLUG, 2 STUD, 1 M5 POST, 1MOHM RESISTOR, EU PLUG | 1 | |
| MD11-200 | EXHAUST PLUGS, Bypass, Exhaust & Exhaust Cone Nozzle, donut style folding type, GE CF6 Engine (set of 9) | 1 | |
| MD80-105 | ENGINE INLET PLUGS, V2500 Engines, screen mesh center type (set of 2) | 1 | |
| MD80-120 | ENGINE EXHAUST PLUGS, folding type, small JT8-D (set of 2) | 1 | |
| MD80-150 | ENGINE INLET PLUGS, screen mesh center, large JT8-D (set of 2) | 1 | |
| MD80-160 | ENGINE EXHAUST PLUGS, folding type, large JT8-D (set of 2) | 1 | |
| MD80-816 | APU Shroud Cooling Air Inlet Plug, small circular inlet above PAC A/C Exhaust opening on aircraft right | 1 | |
| ME65B97812 | HANDLING TOOL - TURBINE EXHAUST PLUG DETUNER | 1 | |
| ME8A5 | 0.750 WELSH PLUG | 1 | |
| MER-105 | AIR CYCLE MACHINE INTAKE PLUGS (in wing leading edge) (set of 2) | 1 | |
| MER-151 | EXHAUST PLUGS (set of 2) | 1 | |
| MFGR13219 | 5301 440 H2 2FLT PLUG TAP | 1 | |
| MFGR13232 | 5301 6-32 H3 2FLT PLUG TAP | 1 | |
| MFGR13242 | 5301 8-32 H3 2FLT PLUG TAP | 1 | |
| MFGR13251 | 5301 10-24 H3 2FLT PLUG TAP | 1 | |
| MFGR13257 | 5301 10-32 H3 2FLT PLUG TAP | 1 | |
| MFGR13270 | 5301 1/4-20 H3 2FLT PLUG TAP | 1 | |
| MFGR13280 | 5301 1/4-28 H3 2FLT PLUG TAP | 1 | |
| MFGR13291 | 5301 5/16-18 H3 2FLT PLUG TAP | 1 | |
| MFGR13300 | 5301 5/16-24 H3 2FLT PLUG TAP | 1 | |
| MFGR13307 | 5301 3/8-16 H3 3FLT PLUG TAP | 1 | |
| MFGR13313 | 5301 3/8-24 H3 3FLT PLUG TAP | 1 | |
| MFGR13328 | 5301 1/2-13 H3 3FLT PLUG TAP | 1 | |
| MFGR13334 | 5301 1/2-20 H3 3FLT PLUG TAP | 1 | |
| MFGR14023 | 5301 1/4-20 H3 4FLT PLUG TAP | 1 | |
| MFGR14032 | 5301 1/4-20 H3 3FLT PLUG TAP | 1 | |
| MFGR14056 | 5301 1/4-28 H3 4FLT PLUG TAP | 1 | |
| MFGR14093 | 5301 5/16-18H3 4FLT PLUG TAP | 1 | |
| MFGR14127 | 5301 5/16-24H3 4FLT PLUG TAP | 1 | |
| MFGR14158 | 5301 3/8-16 H3 4FLT PLUG TAP | 1 | |
| MFGR14191 | 5301 3/8-24 H3 4FLT PLUG TAP | 1 | |
| MFGR14222 | 5301 7/16-14 H3 4FLT PLUG TAP | 1 | |
| MFGR14247 | 5301 7/16-20 H3 4FLT PLUG TAP | 1 | |
| MFGR14282 | 5301 1/2-13 H3 4FLT PLUG TAP | 1 | |
| MFGR14309 | 5301 1/2-20 H3 4FLT PLUG TAP | 1 | |
| MFGR15185 | 5305 440 H2 3FLT PLUG TAP | 1 | |
| MFGR15210 | 5305 5-40H2 3FLT PLUG TAP | 1 | |
| MFGR15232 | 5305 6-32H2 3FLT PLUG TAP | 1 | |
| MFGR15276 | 5305 8-32H2 4FLT PLUG TAP | 1 | |
| MFGR15328 | 5305 10-24 H3 4FLT PLUG TAP | 1 | |
| MFGR15361 | 5305 10-32 H3 4FLT PLUG TAP | 1 | |
| MH68-700 | SWASH PLATE PLUG | 1 | |
| MI17-105 | ENGINE INLET COVERS & Doghouse Inlet plug, for Inlet Baffle (set of 3) | 1 | |
| MIT-022P | 1/8 INCH NPT PLUG | 1 | |
| MIT65B00726 | PLUG - SURGE BLEED EXHAUST, JT9D ENGINE (NON-LOUVERED) | 1 | |
| MIT65B90114 | PLUG - PNEUMATIC CHECK VALVE REPLACEMENT | 1 | |
| MIT69B62284 | BY-PASS JUMPER PLUG, RETRACTABLE POWER DRIVE UNIT (PDU) CARGO HANDLING | 8 | |
| MITS-137 | EXHAUST PLUGS, TR type (set of 2) | 1 | |
| MITS-138 | EXHAUST PLUGS, non TR type (set of 2) | 1 | |
| MODEL1701B | Plug-in Module 1701B Milliohm Meter | 1 | |
| MOVA-109 | FRESH AIR DUCT PLUG (on dorsal, pilot side) | 1 | |
| MQ4-210 | EXHAUST PLUG, w/2 RBF Streamers, BAMS Model | 1 | |
| MQ8B-100 | EXHAUST COVER/PLUG SET, includes exhaust stack "collar" plug (set of 6) | 1 | |
| MQ8B-112 | WEDGE PLUGS, 4 on side fuselage, 1 aft of doghouse, starboard side (set of 5) | 1 | |
| MQ8B-114 | WEDGE PLUGS, right side of fuselage, connected w/ 1" webbing lanyard (set of 5) | 1 | |
| MQ8B-115 | C/L & L/H TAILCONE VENT PLUGS, connected w/ lanyard (set of 2) | 1 | |
| MQ8C-100 | OVERHEAD COCKPIT WEDGE PLUG | 1 | |
| MS21913 | PLUG-ALUMINUM,FLARELESS TUBE SIZES 2 THRU 32 | 1 | |
| MS21913-16 | PLUG HEX HEAD, FLARELESS, CAR | 11 | |
| MS21913D5 | HYDRAULIC BLANK PLUG | 2 | |
| MS21913D6 | ALUMINUM PLUG, TUBE FITTING, THREADED | 19 | |
| MS21913K | MACHINING - 316 SS PLUG 1/2 IN PER MS21913-8 CERT QQ-S-763 | 1 | |
| MS21913W8 | PLUG - HYDRAULIC RETURN TUBE, 1/2 INCH LINE, ALUMINUM | 1 | |
| MS21914-4 | HARDWARE, FLARELESS, PLUG | 24 | |
| MS21914-45 | Threaded Plug | 1 | |
| MS21914-5J | PLUG,TUBE FITTING,THREADED | 1 | |
| MS24391-8 | PLUG: WITH O-RING | 1 | |
| MS27215-1 | Military Standard MS27215-1 18mm (Non-Refillable) Dehydrator Spark Plug | 3 | |
| MS27215-2 | PLUG-DEHYDRATOR,W/BLK ABS BASEAN4062-1 | 5 | |
| MS27473T18F53P | CABLE WITH PLUG | 3 | |
| MS3106F22-22SN | TEST STRAIGHT PLUG | 1 | |
| MS3396-12 | Military Standard MS3396-12 14mm Dehydrator Spark Plug | 2 | |
| MS3476L24-61SN | CONNECTOR, STRAIGHT PLUG, 61 | 2 | |
| MS51840-23 | SWITCH BOSS PLUG | 1 | |
| MS51840-25 | SWITCH BOSS PLUG | 1 | |
| MS51840-27 | SWITCH BOSS PLUG | 1 | |
| MS9953-04 | PLUG,MACHINE THREAD | 1 | |
| MS9954-08 | PLUG: MACHINE THREAD,CRES, W/ORING,DRILLED | 12 | |
| MT329-6 | PLUG-MAIN ROTOR HUB BEARING | 1 | |
| MT74H52A-110 | HEADPHONE - 600 OHM, WITH 1/4 INCH MONO RCA AUDIO PLUG | 2 | |
| MT7H79F-01GB | HEADSET,HI-VIZ,GC,US NATO PLUG,PELTOR | 5 | |
| MT7H79F01GB | HEADPHONE - 600 OHM, WITH 1/4 INCH MONO RCA AUDIO PLUG | 5 | |
| MTLS-101 | ENGINE INLET PLUGS (PORSCHE ENGINE) (set of 3) | 1 | |
| MTLS-109 | FRESH AIR DUCT PLUG (on dorsal, pilot side) | 1 | |
| MU2-110 | EXHAUST PLUGS: 8.5" INSIDE DIA. (-10 engines, Marquis & Solitaire) (set of 2) | 1 | |
| MU2-115 | EXHAUST PLUGS: 10.5" INSIDE DIA. (-5 engines) (set of 2) | 1 | |
| N-2053-07-S-E | PLUG, O-RING HEX HEAD | 1 | |
| N-2053-07-S-E-1 | PLUG, O-RING HEX HEAD | 1 | |
| N-2206-03-S | PLUG, HEX HEAD | 2 | |
| N-2403-04-B | PLUG, MALE THREAD | 1 | |
| N2206-03S | PLUG: HEX HD, | 2 | |
| N2403-04B | PLUG: THREAD,MALE | 1 | |
| N2522-03SS | PLUG: HEX HD, | 1 | |
| N2589-02 | PLUG: MALE THREAD, | 2 | |
| NAV-402AP | TEST SET, NAV/COM. WE ARE IN NEED OF THE 6 PIN PLUG ONLY FOR THE NAV-402P | 13 | |
| NB737-250 | PLUG - BYPASS & EXHAUST | 1 | |
| NEO005F-P-06 | 5080 PSI High Pressure Plug | 1 | |
| NEO005F-P-08 | 5080 PSI High Pressure Plug | 1 | |
| NEO005F-P-10 | 5080 PSI High Pressure Plug | 1 | |
| NEP-18 | PLUG(1 1/8-18 X 1.25 X 0.54)INCH | 2 | |
| NEP-22 | PLUG(1 3/8-18 X 1.52 X 0.54)INCH | 2 | |
| OATRU3013FL3IP | MASTERPLUG OATRU3013FL3IP IP65 RATED REVERSE REEL WITH PULL OUT SOCKET | 1 | |
| ODP12RHD | HD MAGNETIC OIL DRAIN PLUG REM | 1 | |
| OH58-120 | EXHAUST PLUG | 1 | |
| OMP2505-5 | Dust Plug - Hosehalf GSE | 4 | |
| OMP2506-5 | DUST PLUG - HOSEHALF | 7 | |
| ONX-2XX-PWR-ADPT-WALL | ONX-2XX-PWR-ADPT-WALL;OneExpert 2XX - Power Adapter with International Power Plugs | 1 | |
| OSD050-SS−YL−SG−P1 | OPEN SPOOL STATIC DISCHARGE REEL 50' W/ROUND GRND PLUG | OSD050-SS-YL-SG-P1 | GR60920604 | BY GLEAS | 1 | |
| OTC5961HD | HD DRAIN PLUG PRO KIT | 1 | |
| OU145855 | SHUNT PLUG | 1 | |
| P180-105 | ENGINE INLET PLUGS, with "lips" cover extension (set of 2) | 1 | |
| P21-SH0RTING-PLUG | SHORTING PLUG B757 TOOL | 1 | |
| P28 | PLUG THREADED PIPE PLUG 1/4" | 1 | |
| P31C-131 | ENGINE INLET PLUGS (PANTHER CONVERSION) (set of 4) | 1 | |
| P31T-150 | EXHAUST PLUGS (set of 4) | 1 | |
| P40-170 | WING ROOT FRESH AIR PLUGS (set of 2) | 1 | |
| P40-200 | EXHAUST PLUGS (set of 12) | 1 | |
| P42A-101 | INTAKE PLUGS, with Prop-Slings (set of 2) | 1 | |
| P42A-102 | INTAKE PLUGS with 1.5 inch lip and Prop-Slings (set of 2) | 1 | |
| P42A-110 | EXHAUST PLUGS (set of 2) | 1 | |
| P51-110 | CHIN SCOOP PLUG | 1 | |
| P51-160 | EXHAUST PLUGS (set of 12) | 1 | |
| P601-103 | HEAT EXCHANGER INLET PLUGS (set of 2) | 1 | |
| P601-105 | HEATER AIR INLET PLUGS (ON TAIL) (set of 2) | 1 | |
| P63-100 | INTAKE PLUG (behind canopy) | 1 | |
| P63-120 | EXHAUST PLUGS (set of 24) | 1 | |
| P6614 | PLUG-SHIPPING | 1 | |
| P6626 | PLUG-SHIPPING | 1 | |
| PA24-108 | ENGINE INLET PLUGS (Comanche 400) (set of 4) | 1 | |
| PA24-110 | CARB AIR INLET PLUG (oval shape) | 1 | |
| PA24-115 | CARB AIR INLET PLUG (rectangle shape) | 1 | |
| PA28-105 | CARB. AIR or OIL COOLER INLET PLUG (each, specify model and year) | 1 | |
| PA31-105 | ENGINE INLET PLUGS (PANTHER CONVERSION) (set of 4) | 1 | |
| PA32-100 | ENGINE INLET PLUGS (CHEROKEE 6-300, LANCE & SARATOGA-301: NORM. ASPIRATED) (set of 2) | 1 | |
| PA32-102 | ENGINE INLET PLUGS (CHEROKEE 6-260: NORM. ASPIRATED) (set of 2) | 1 | |
| PA32-130 | ENGINE INLET PLUG (TURBO SARATOGA or LANCE, Fishmouth Opening) | 1 | |
| PC24-100 | ENGINE INLET COVERS & EXHAUST PLUGS (set of 4) | 1 | |
| PC24-105 | ENGINE INLET COVERS & EXHAUST PLUGS, with starter inlet plugs (set of 6) | 1 | |
| PC24-110 | ENGINE INLET PLUGS & EXHAUST PLUGS, with starter inlet plugs (set of 6) | 1 | |
| PC24-130 | EXHAUST PLUGS (set of 2) | 1 | |
| PC7-150 | HEATER INTAKE PLUG, (similar to mfg p/n H9015-6515) | 1 | |
| PD-40 | THREADED CAPLUG | 4 | |
| PD01-000 | ONE TOUCH EAR PLUG DISPENSER | 1 | |
| PDE160 | PLUG THREADED PLUG | 1 | |
| PF55987 | DUST PLUG AND CHAIN | 2 | |
| PH1-100 | ENGINE INTAKE COVERS & EXHAUST PLUGS (includes lower nacelle plugs) (set of 6) | 3 | |
| PH1-110 | ENGINE INTAKE PLUGS & EXHAUST PLUGS (includes lower nacelle plugs) (set of 8) | 1 | |
| PH1-111 | ENGINE INTAKE PLUGS & EXHAUST PLUGS (includes lower nacelle plugs), folding type (set of 8) | 1 | |
| PH1-115 | ENGINE INTAKE/EXHAUST COVERS (includes lower nacelle plugs) (set of 6) | 1 | |
| PH2200A1 | HEAT GUN,PROHEAT VARITEMP EUROPEAN PLUG,130-815 DE | 1 | |
| PH2200A6 | HEAT GUN,PROHEAT VARITEMP UK PLUG, 130-815 DEGREE | 1 | |
| PH2200K-A6 | HEAT GUN,PROHEAT VARITEMP KIT PH2200 UK PLUG | 1 | |
| PH3-100 | ENGINE INLET COVERS & EXHAUST PLUGS (set of 4) | 1 | |
| PH3-105 | ENGINE INLET COVERS & EXHAUST PLUGS (includes lower nacelle plug) (set of 6) | 2 | |
| PH3-110 | ENGINE INLET PLUGS & EXHAUST PLUGS (set of 4) | 1 | |
| PH3-111 | ENGINE INLET PLUGS & EXHAUST PLUGS (includes lower nacelle plugs) (set of 8) | 1 | |
| PH3-130 | EXHAUST PLUGS (set of 2) | 1 | |
| PHG 600-3 | HEAT GUN 1800W 240V (LOCAL PLUG) | 1 | |
| PHI 350-317-0 | CHIP PLUG WEIGHT | 1 | |
| PHI 350-318-0 | CHIP PLUG WEIGHT | 1 | |
| PLGA3430010A | SHORT STYLE LEE PLUG | 1 | |
| PM20 | PLUG MALE THREAD | 1 | |
| PRE-100 | INTAKE COVER/EXHAUST PLUG SET (set of 6) | 1 | |
| PRE-101 | INTAKE PLUG/EXHAUST PLUG SET (set of 8) | 1 | |
| PRE65B00726 | Plug-side cowl oil breather duct | 1 | |
| PRE65B94200 | PLUG - DISCHARGE VENT, THERMAL ANTI-ICING, CF6-50 ENGINE | 1 | |
| PRE65B94241 | AIR EXHAUST PLUG - GENERATOR CF6-50 | 1 | |
| PRE65B94270 | AIR DISCHARGE PLUG - FAN THRUST REVERSER CF6-50 | 1 | |
| PRE65B97800 | CRADLE - PLUG, EXHAUST (JT9D POWERPLANT) | 1 | |
| PT13-130 | EXHAUST PLUG | 1 | |
| PWA 80968 | PLUG, VACUUM CHECK | 1 | |
| PWA 88709 | PLUG, HOLDING | 1 | |
| PWA101620 | WRENCH,PLUG REMOVAL | 2 | |
| PWA101674 | CRIMPER MECHANICAL BORESCOPE PLUG LOCK | 2 | |
| PWA101674C | MECHANICAL CRIMPER - ENG ASSY PSI PLUG__TO CRIMPS THE KEY WASHER ON BSI PLUGS_838 X 229 X 77 MM / 1.2 KG_[PWA101674C] | 1 | |
| PWA101967 | CRIMPER MECHANICAL BOROSCOPE PLUG LOCK | 1 | |
| PWA103684 | PLUG PLUG VACUUM CHECK | 2 | |
| PWA105181 | CRIMPER MECHANICAL BORESCOPE PLUG LOCK | 6 | |
| PWA111679 | PULLER, JACKSCREW-FAN SHAFT PLUG | 3 | |
| PWA111719 | PLUG PLUG VACUUM CHECK | 1 | |
| PWA111744 | PULLER, HAND - ENGINE ASSY, LAYSHAFT OIL PLUG | 2 | |
| PWA115141 | DIFFUSER, BORESCOPE PLUG LOCK ( .375 X 24 THREAD) | 1 | |
| PWA115422 | HPC, BORESCOPE PLUG LOCK (.500 X 20 & .4375 X 20 THREAD) | 3 | |
| PWA12402 | WRENCH FRONT COMPRESSOR ROTOR PLUG | 6 | |
| PWA212003 | HPC, BORESCOPE PLUG LOCK ( .4375 X 20 THREAD) | 1 | |
| PWA212004 | DIFFUSER, BORESCOPE PLUG LOCK ( .375 X 24 THREAD) | 1 | |
| PWA212014 | HPC, BORESCOPE PLUG LOCK (.500 X 20 THREAD) | 1 | |
| PWA25378 | WRENCH INSTRUMENTATION PLUG 2-3 COMPRESSOR INNER | 1 | |
| PWA25647 | PLUG HOLDER_[PWA25647] | 2 | |
| PWA26657 | CHASING TAP - IGNITER PLUG | 8 | |
| PWA28966 | WRENCH-BORESCOPE PLUG,REMOVE INSTALL | 2 | |
| PWA4000-10 | PLUG SET LOACTING HPC STATIC BALANCE | 1 | |
| PWA45235 | BOROSCOPE IGNITOR PLUG WRENCH | 6 | |
| PWA45269 | Plug , Vacuum CHECK | 1 | |
| PWA45296 | PLUG, VACUUM CHECK | 1 | |
| PWA45470 | WRENCH ENG IGNTR PLUG | 6 | |
| PWA47260 | WRENCH IGNITOR PLUG | 1 | |
| PWA75250 | BORESCOPE PLUG WRENCH-10TH & 14TH_[PWA75250] | 1 | |
| PWA75509 | GAUGE - DEPTH, IGNITER PLUG IMMERSION | 3 | |
| PWA80878 | PLUG,VACUUM CHECK | 1 | |
| PWA81133 | GAGE DEPTH ENGINE ASSEMBLY IGNITER PLUG IMMERSION | 3 | |
| PWA81352 | PLUG, VACUUM CHECK | 1 | |
| PWA81573 | PULLER MECHANICAL LPT DRIVE SHAFT FRONT PLUG | 1 | |
| PWA85005 | BUILD AND STORAGE HPT, PLUG | 1 | |
| PWA85008 | BUILD AND STORAGE HPT, HUB PLUG | 1 | |
| PWA85010 | BUILD AND STORAGE HPC, HUB PLUG | 1 | |
| PWA85063 | PLUG SET HOLDING HPC | 1 | |
| PWA85064 | PLUG SET HOLDING HPC | 1 | |
| PWA85108-8 | PLUG HOLDING ENG. ASSY. | 1 | |
| PWA85108-C | PLUG HOLDING ENG. ASSY. | 1 | |
| PWA85110 | PLUG HOLDING ENG. ASSY. | 1 | |
| PWA85111 | PLUG HOLDING ENG. ASSY. | 1 | |
| PWA85231 | PLUG SET HOLDING LPT | 1 | |
| PWA85297 | PLUG VACUUM CHECK | 1 | |
| PWA85298 | PLUG VACUUM CHECK | 1 | |
| PWA85299 | PLUG VACUUM CHECK | 1 | |
| PWA85300 | PLUG VACUUM CHECK | 1 | |
| PWA85301 | PLUG VACUUM CHECK | 1 | |
| PWA85302 | PLUG VACUUM CHECK | 1 | |
| PWA85795 | PULLER MECHANICAL ENG. ASSY LPT BOROSCOPE PLUG | 1 | |
| PWA85797 | PULLER MECHANICAL ENG. ASSY LPT BOROSCOPE PLUG | 1 | |
| PWA85978 | PLUG,VACUUM CHECK-EXHAUST CASE OIL SCAVENGE | 1 | |
| PWA86081 | PULLER-MECHANICAL LPT BORESCOPE PLUG | 7 | |
| PWA86345 | BUILD AND STORAGE HPT, PLUG | 1 | |
| PWA87215 | PLUG HOLDING | 1 | |
| PWA88077 | R/I EXHAUST PLUG PW | 1 | |
| PWA88651 | PULLER-KNOCKER HPC BSI PLUG_[PWA88651] | 2 | |
| PWC30128-4 | PULLER T-HANDLE PLUG (REMOVAL OF OIL FILTER BYPASS) | 4 | |
| PWC30257 | plug - Pratt & Whitney Canada | 3 | |
| PWC30497 | Plug - Pratt & Whitney Canada | 2 | |
| PWC30503 | PUNCH, PLUG | 1 | |
| PWC30504 | PUNCH, PLUG | 1 | |
| PWC30530 | Plug Fuel Nozzle - Pratt & Whitney Canada | 9 | |
| PWC30871 | Puller Plug - Pratt & Whitney Canada | 5 | |
| PWC31573 | PLUG, NO.4 BEARING HSG. COVER OIL PASSAGE | 1 | |
| PWC37064 | guide plug - Pratt & Whitney Canada | 2 | |
| PWC37574 | Hydraulic Pump Plug | 1 | |
| PWC37887 | PLUG HOUSING, PT6 TOOL, | 1 | |
| PWC37888 | PLUG HOUSING, PT6 TOOL | 1 | |
| PWC38116 | Plug Housing Tool kit | 1 | |
| PWC38182 | Plug Housing | 1 | |
| PWC38183 | Plug Housing | 1 | |
| PWC38184 | Plug Housing | 1 | |
| PWC38185 | Plug Housing | 1 | |
| PWC38186 | Plug Housing | 1 | |
| PWC38187 | Plug Housing | 1 | |
| PWC38188 | Plug Housing | 1 | |
| PWC38189 | Plug Housing | 1 | |
| PWC38190 | Plug Housing | 1 | |
| PWC38191 | Plug Housing | 1 | |
| PWC38192 | Plug Housing | 1 | |
| PWC38193 | Plug Housing | 1 | |
| PWC38931 | plug - Pratt & Whitney Canada | 2 | |
| PWC38956 | plug - Pratt & Whitney Canada | 2 | |
| PWC38957 | plug - Pratt & Whitney Canada | 2 | |
| PWC50574 | SHAFT plug | 1 | |
| PWC51336 | PLUG SPLINED - Pratt & Whitney Canada | 3 | |
| PWC52693 | PLUG, LEAKAGE CHECK, POST-SB7598 FUEL MANIFOLD INLET ADAPTER | 1 | |
| PWC52701 | PLUG, LEAKAGE CHECK, POST-SB7598 FUEL MANIFOLD INLET ADAPTER | 1 | |
| PWC54639 | SOCKET PLUG - Pratt & Whitney Canada | 8 | |
| PWC57233 | PULLER, COMPRESSOR WASH AND BORO PLUG | 9 | |
| PWC57259 | Propeller Shaft Plug | 1 | |
| PWC64387 | HYDRAULIC GEAR PLUG | 1 | |
| PWC67860 | Plug leak Check | 2 | |
| PWC69812 | PLUG-ENGINE BREATHER | 6 | |
| PWC69836 | WAND, COMPRESSOR WASHER & BLANKING PLUG, BREATHER OUTLET | 7 | |
| PWC72886 | PLUG PT SHAFT MPI | 1 | |
| PWC77455 | PUSHER PLUG | 1 | |
| PWC86607-2-REVA | DIRECT PLUG HANDLE | 1 | |
| Q400-104 | APU EXHAUST PLUG | 1 | |
| R10009 | PLUG – APU EXHAUST DUCT | 1 | |
| R10009-1 | PLUG APU EXHAUST DUC | 1 | |
| R10009-A320 | A320 APU PLUG H/S APU MODELS 4500001B OR 4500001A | 1 | |
| R114-116 | DORSAL INLET PLUG (rectangular type: 4.75" high, 1.25" wide) | 1 | |
| RA09MB-O | RA09MB-O;Spectrum Analyzer Module 9 kHz to 9 GHz with Pluggable Optics 100G HW | 1 | |
| RA18MB-O | RA18MB-O;Spectrum Analyzer Module 9 kHz to 18.5 GHz with Pluggable Optics 100G HW | 1 | |
| RA32MB-O | RA32MB-O;Spectrum Analyzer Module 9 kHz to 32 GHz with Pluggable Optics 100G HW | 1 | |
| RA44MB-O | RA44MB-O;Spectrum Analyzer Module 9 kHz to 44 GHz with Pluggable Optics 100G HW | 1 | |
| RA70301 | Thrust Reverser Plug | 4 | |
| RA70302 | Exhaust Plug | 4 | |
| RB MS27215-2 | 18 mm Dehydrator Plug | 1 | |
| RB T100394 | Rotor Hub Grip Bearing Plug | 1 | |
| RB T103115 | Gearshaft Plug | 1 | |
| RB T103310-105 | Plug Freewheeling Assembly | 2 | |
| RB6798048 | GAGE--PLUG, PRESSURE OIL PUMP BUSHIN | 2 | |
| RB6798049 | Scavenge Oil Pump Cover Bushing Plug Gauge | 2 | |
| RB6897885 | Plug-Alignment Check, Frt Support Bearing Hsg Bore | 1 | |
| RB6898261 | Plug, Alignment Check Frt. Support Bearing Housing Bore | 2 | |
| RB6898418 | JIG--DRILL, MAGNETIC PLUG INSERT DRILLS THE PIN HOLE IN THE MAG DRAIN PLUG AND GEARBOX CASE. | 2 | |
| RBE-06-6813 | PLUGS FOR RUBBER HOSE | 1 | |
| RBE64244426 | Michigan Fuel Filter Plug | 1 | |
| RCA-5176-001 | SHORTING PLUG (ROCKWELL COLLINS) | 1 | |
| RD-AK8134001 | TOUCHPAD HANDSET TESTER PLUG-IN | 1 | |
| RD-AK8151002 | HANDSET VIDEOTESTER PLUG-IN S/W | 1 | |
| REM38E | CHAMPION SPARK PLUG | 1 | |
| RHB32E | CHAMPION SPARK PLUG | 1 | |
| RHB37E | CHAMPION SPARK PLUG | 1 | |
| ROC472086A | SPARK PLUG SLEEVE HOLDER | 1 | |
| RQ4-116 | SECURITY STRAP FOR INTAKE PLUG, attaches to ball-lock pins aft of intake lip. | 1 | |
| RQ4-210 | EXHAUST PLUG w/ lip, A and B models | 1 | |
| RRT082441 | AIR HOLE PLUG | 1 | |
| RSABG0003 | EXHAUST PLUG - APU | 6 | |
| RSABG0003 /C10003 | PLUG - APU EXHAUST | 1 | |
| RSE1012 | SUPPORT - EXHAUST PLUG | 5 | |
| RSE1012 REV A | SUPPORT, EXHAUST PLUG REMOVAL & INSTALLATION | 1 | |
| RSE1013-1 | SUPPORT PLUG EXHAUST | 1 | |
| RSE1018 | PLUG-THRUST REVERSER DUCT | 3 | |
| RSE1018 REV B | PLUG, FAN THRUST REVERSER DUCT | 1 | |
| RSE1020 | PLUG, GEARBOX BREATHER VENT | 3 | |
| RSE1020 REV A | PLUG, GEARBOX BREATHER VENT | 1 | |
| RSE1021 | PLUG VENT BREATHER G | 5 | |
| RSE1030 | FIXTURE,EXHAUST PLUG REMOVAL | 1 | |
| RSE1030 REV NC | FIXTURE, EXHAUST PLUG SUPPORT | 1 | |
| RSE1078 | FIXTURE EXHAUST PLUG SUPPORT | 4 | |
| RSE1078 REV NC | FIXTURE - EXHAUST PLUG SUPPORT | 1 | |
| RSE1081 | EXHAUST PLUG DOLLY | 3 | |
| RSE1103 | PLUG-THRUST REVERSER DUCT | 3 | |
| RSE1241 | PLUG CONTROL ECHO COWL ECU VENT | 5 | |
| RSE1243 | WRENCH SPANER AI PLUG | 4 | |
| RSE3414 | PLUG EXHAUST ENGINE | 4 | |
| RSE3415 | PLUG EXHAUST ENGINE | 5 | |
| RSE7305 | PLUG,THRUST REVERSER NOZZLE ; BR715 | 1 | |
| RSEI020 | PLUG, GEARBOX BREATHER VENT | 1 | |
| RSEI030 | FIXTURE, EXHAUST PLUG SUPPORT | 1 | |
| RSEI078 | FIXTURE - EXHAUST PLUG SUPPORT | 1 | |
| RSEI0I2 | SUPPORT, EXHAUST PLUG REMOVAL & INSTALLATION | 1 | |
| RSEI0I8 | PLUG, FAN THRUST REVERSER DUCT | 1 | |
| RTWHCP2 | PLUG CAP X-SHANK | 1 | |
| RV10-101 | ENGINE INLET PLUGS, Showplanes Cowling (Circular Inlets) (set of 2) | 1 | |
| RV10-ART | ENGINE INLET PLUGS, with Aerotherm Heater Cut-Outs (set of 3) | 1 | |
| RV14-102 | ENGINE INLET PLUGS, includes auxiliary intake plug on right side (set of 3) | 1 | |
| S211-200 | EXHAUST PLUG (folding type) | 1 | |
| S3126 | S3126;MTP Adapter / black / full flange / with one dust plug | 1 | |
| S340-105 | EXHAUST PLUGS (set of 2) | 1 | |
| S361 | SPARK PLUG HOLDER | 6 | |
| S47197 | PREFORMEDPACKINGINSTALLATIONCONEFORTHEPLUG | 1 | |
| S4876W | STECK S-4876/WMT 3PT 200A 6H 380/440V IP67 PLUG - USED IN HYDRAULIC MULE | 1 | |
| S51-100 | CHIN SCOOP PLUG | 1 | |
| S5317216220800 | LH PLUG - HOISTING JACK ATTACH BUSHING | 2 | |
| S5317216220900 | RH PLUG - HOISTING JACK ATTACH BUSHING | 2 | |
| S550-112 | INTAKE COVERS & EXHAUST PLUGS SET (recommended) (set of 4) | 1 | |
| S550-114 | EXHAUST PLUGS (set of 2) | 1 | |
| S550-115 | INTAKE/EXHAUST PLUG SET (set of 4) | 1 | |
| S58T-110 | PARTICLE SEPARATOR EXHAUST PLUGS (set of 2) | 1 | |
| S76-104 | EXHAUST PLUGS (S76A and S76C models) (set of 3) | 1 | |
| S9706KRA | 5/8IN RETENTION HEX SPARK PLUG | 2 | |
| SAB-120 | ENGINE COVERS (WITH TR'S), Sabre 65 (Garrett 731 Engines)(CT-39) w/plugs (set of 6) | 1 | |
| SDG-4 | EXHAUST PLUG | 1 | |
| SF50-200 | ENGINE EXHAUST PLUG | 1 | |
| SG 703A95-0520-01 | ENGINE OIL & HYDRAULIC FLUID DRAIN PLUG | 1 | |
| SJ30-100 | ENGINE INLET & EXHAUST PLUG SET, includes small inlet below main (set of 6) | 1 | |
| SJ30-110 | ENGINE INLET COVERS & EXHAUST PLUGS (set of 4) | 1 | |
| SM14-200 | EXHAUST PLUGS (set of 12) | 1 | |
| SM9-200 | EXHAUST PLUGS (set of 12) | 1 | |
| SMA001M | Bowers SMA001M SmartPlug M6 Holder Short 8mm Stem | 1 | |
| SMA002M | Bowers SMA002M SmartPlug M6 Holder Long 8mm Stem | 1 | |
| SMA004 | Bowers SMA004 SmartPlug M6 Probe Holder 8mm Stem | 1 | |
| SMA005M | Bowers SMA005M SmartPlug M10 Holder Short 8mm | 1 | |
| SMA006M | Bowers SMA006M SmartPlug M10 Holder Long 8mm Stem | 1 | |
| SMA008 | Bowers SMA008 SmartPlug M10 Probe Holder 8mm Stem | 1 | |
| SMA009M | Bowers SMA009M SmartPlug Type A Mini Indicator with Shroud & M6 Short Holder 8mm Stem | 1 | |
| SMA011M | Bowers SMA011M SmartPlug Type A Mini Indicator with Shroud & M6 Long Holder 8mm Stem | 1 | |
| SMA013 | Bowers SMA013 SmartPlug Type C Indicator with Shroud & M6 Holder 8mm Stem | 1 | |
| SMA013-BT | Bowers SMA013-BT SmartPlugType C Bluetooth Indicator with Shroud & M6 Holder 8mm Stem | 1 | |
| SMA015M | Bowers SMA015M SmartPlug Type A Mini Indicator with Shroud & M10 Short Holder 8mm Stem | 1 | |
| SMA017M | Bowers SMA017M SmartPlug Type A Mini Indicator with Shroud & M10 Long Holder 8mm Stem | 1 | |
| SMA019 | Bowers SMA019 SmartPlug Type C Indicator with Shroud & M10 Holder 8mm Stem | 1 | |
| SMA019-BT | Bowers SMA019-BT SmartPlug Type C Indicator with Shroud & M10 Holder 8mm Stem (with Bluetooth) | 1 | |
| SMA019-NANO | Bowers SMA019-NANO SmartPlug Type C Nano Indicator with Shroud & M10 Holder 8mm Stem Resolution 0.0001mm | 1 | |
| SMA022 | Bowers SMA022 SmartPlug Type B Mechanical Dial Gauge Graduation 0.001mm | 1 | |
| SMA023-BT | Bowers SMA023-BT SmartplugType C Digital Indicator with Bluetooth Resolution 0.001mm | 1 | |
| SMA028 | Bowers SMA028 SmartPlug M6-M10 Adapter (to use M10 Holders with M6 Plugs) | 1 | |
| SMA031 | Bowers SMA031 SmartPlug Type C Nano Bluetooth Digital Indicator Resolution 0.0001mm | 1 | |
| SMPDS00 | Bowers SMPDS00 Smartplug Depth Stop Dia Range Below 6mm | 1 | |
| SMPDS00-09 | Bowers SMPDS00-09 Smartplug Depth Stop Diameter Range Below 6mm | 1 | |
| SMPDS01 | Bowers SMPDS01 Smartplug Depth Stop Dia Range 6-8.5mm | 1 | |
| SMPDS02 | Bowers SMPDS02 Smartplug Depth Stop Dia Range 8.5-13mm | 1 | |
| SMPDS03 | Bowers SMPDS03 Smartplug Depth Stop Dia Range 13-17.5mm | 1 | |
| SMPDS04 | Bowers SMPDS04 Smartplug Depth Stop Dia Range 17.5-25mm | 1 | |
| SMPDS05 | Bowers SMPDS05 Smartplug Depth Stop Dia Range 25-32.5mm | 1 | |
| SMPDS06 | Bowers SMPDS06 Smartplug Depth Stop Dia Range 32.5-40mm | 1 | |
| SMPDS07 | Bowers SMPDS07 Smartplug Depth Stop Dia Range 40-47.5mm | 1 | |
| SMPDS08 | Bowers SMPDS08 Smartplug Depth Stop Dia Range 47.5-55mm | 1 | |
| SMPDS09 | Bowers SMPDS09 Smartplug Depth Stop Dia Range 55-62.5mm | 1 | |
| SMPDS10 | Bowers SMPDS10 Smartplug Depth Stop Dia Range 62.5-70mm | 1 | |
| SMPDS11 | Bowers SMPDS11 Smartplug Depth Stop Dia Range 70-77.5mm | 1 | |
| SMPDS12 | Bowers SMPDS12 Smartplug Depth Stop Dia Range 77.5-85mm | 1 | |
| SMPDS13 | Bowers SMPDS13 Smartplug Depth Stop Dia Range 85-92.5mm | 1 | |
| SMPDS14 | Bowers SMPDS14 Smartplug Depth Stop Dia Range 92.5-100mm | 1 | |
| SNX-105 | EXHAUST PLUG, SubSonex jet engine nacelle | 1 | |
| SOUND LEVEL METERB | AUDIO OSCILLATOR,200AB MULTIMETER, 2000A SOUND LEVEL METERB&K TYPE 2219 PHONE PLUG, PJ-051B CAPACITOR, 220 UF +/-20, 50 WVDC RESISTOR, 150-OHM +/-5, 3-WATT | 1 | |
| SOUND LEVEL METERB&K TYPE 2219 | AUDIO OSCILLATOR,200AB MULTIMETER, 2000A SOUND LEVEL METERB&K TYPE 2219 PHONE PLUG, PJ-051B CAPACITOR, 220 UF ±20%, 50 WVDC RESISTOR, 150-OHM ±5%, 3-WATT | 1 | |
| SP68138 | EXHAUST PLUG | 1 | |
| SP68758 | HOSE PLUG | 1 | |
| SPARK PLUG HOLDER | Spark Plug Holder | 1 | |
| SPCT-100A | SPARK PLUG TESTERHIGH TENSION CABLE TESTERKENT - MOORE CABLE GAUGE 1/16, 3/32, 1/8 15-70LB | 5 | |
| SPL-10699 | Plug-Thrust Reverser GE | 1 | |
| SPL-10700 | Plug- Exhaust Nozzle GE | 1 | |
| SPL-11352 | PLUG - SHUNT | 1 | |
| SPL-11890 | PLUG SET - NOSE WHEEL STEERING CYLINDER | 1 | |
| SPL-14429 | SPANNER WRENCH - REMOVAL/INSTALLATION, CANOE FAIRING AERO PLUGS | 1 | |
| SPL-1660 | TEST BOX - CARGO SMOKE HEATER, TEST PLUG | 1 | |
| SPL10040 | SHORTING PLUG | 1 | |
| SPL49711 | GO PLUG GAGE HANDLE TOOL | 1 | |
| SR22-105 | ENGINE INLET PLUGS, G2 through G6 models (set of 2) | 1 | |
| ST-46 | DRIFT, INSTALL CRANKSHAFT OIL PLUG ADQUIRIR | 1 | |
| ST600-432 | HOISTING PLUG WRENCH | 1 | |
| ST869K-C-40F | PLUG, CLAMP, THREADED, FITTING END | 1 | |
| ST869K-C-40F-10 | PLUG, CLAMP, THREADED, FITTING END | 1 | |
| ST869K-C-56F | PLUG, CLAMP, THREADED, FITTING END | 1 | |
| ST869K-C-56F-12 | PLUG, CLAMP, THREADED, FITTING END | 1 | |
| ST869K-C-64F | PLUG, CLAMP, THREADED, FITTING END | 1 | |
| ST869K-C-64F-13 | PLUG, CLAMP, THREADED, FITTING END | 1 | |
| STD-1131 | PLUG - PROTECTIVE, FLARELESS TUBE, 1/2-20 THREAD | 1 | |
| STD-13898 | HEADSET WITH BOOM MIC AND TWO-PRONG PLUG (FOR USE ON FLIGHT DECK DURING CVR TESTING) | 1 | |
| STD-1390 | HEADPHONE - 600 OHM, WITH 1/4 INCH MONO RCA AUDIO PLUG | 1 | |
| STD-13901 | HEADPHONE - 600 OHM, WITH 1/4 INCH MONO RCA AUDIO PLUG | 1 | |
| STD-14686 | FITTINGS- HYDRAULIC, CAPS/ PLUGS | 2 | |
| STD-5497 | PLUG/CAP - TO BLOCK EACH PORT | 1 | |
| STI- | GAUGE, THREAD PLUG UNF-2B | 1 | |
| STR-200 | EXHAUST PLUG | 1 | |
| STR-205 | EXHAUST PLUG, folding type | 1 | |
| SVG-100 | ENGINE INLET PLUGS (Savannah S) (set of 2) | 1 | |
| SWG-98 | 3/8-16 HEX BOLT PLUG | 1 | |
| T-05640-5 | FILLER PLUG WELD MACHINING TOOL | 1 | |
| T-05640-6 | FILLER PLUG WELD MACHINING TOOL | 1 | |
| T-05640-8 | WELD MACHINING TOOL, FILL PLUG | 1 | |
| T-262775 | PLUG, HYDROSTATIC TEST, FILL FITTING | 3 | |
| T-474489-1-4 | PLUG, HYDROSTATIC TEST, FILL FITTING | 1 | |
| T-474489-1-5 | "PLUG, HYDROSTATIC | 1 | |
| T-474530-1-4 | PLUG, HYDROSTATIC TEST, FILL FITTING | 1 | |
| T-474530-1-5 | PLUG, HYDROSTATIC TEST, TCPT FITTING | 1 | |
| T-474530-1-9 | WELD-MACHINING TOOL, FILL PLUG | 1 | |
| T-474566-1-9 | WELD-MACHINING TOOL, FILL PLUG | 1 | |
| T-475069-1-12 | SHIELD, ARGON, FILL PLUG | 1 | |
| T-475069-1-4 | PLUG, HYDROSTATIC TEST, FILL FITTING | 1 | |
| T-475069-1-5 | PLUG, HYDROSTATIC TEST, TCPT FITTING | 1 | |
| T-475069-1-9 | WELD-MACHINING TOOL, FILL PLUG | 1 | |
| T-475070-1-12 | SHIELD, ARGON, FILL PLUG | 1 | |
| T-475070-1-4 | PLUG, HYDROSTATIC TEST, FILL FITTING | 1 | |
| T-475070-1-5 | PLUG, HYDROSTATIC TEST, TCPT FITTING | 1 | |
| T-475070-1-9 | WELD-MACHINING TOOL, FILL PLUG | 1 | |
| T-475166-1-4 | PLUG, HYDROSTATIC TEST, FILL FITTING | 1 | |
| T-475166-1-5 | PLUG, HYDROSTATIC TEST, TCPT FITTING | 1 | |
| T-475976-1-4 | PLUG, HYDROSTATIC TEST, FILL FITTING | 1 | |
| T-475976-1-5 | PLUG, PRESSURE TEST, SWITCH FITTING | 1 | |
| T-61241-10 | LEE PLUG PUNCH | 1 | |
| T-61241-12 | LEE PLUG PUNCH | 1 | |
| T-61241-14 | LEE PLUG PUNCH | 1 | |
| T-61241-4 | LEE PLUG PUNCH | 1 | |
| T-61241-6 | LEE PLUG PUNCH | 1 | |
| T-61241-8 | LEE PLUG PUNCH | 1 | |
| T-71025 | Torque Adapter - Plug, blocking and thermal relief valve | 1 | |
| T-898869-10 | PLUG, HYDROSTATIC TEST, FILL FITTING | 1 | |
| T-APJ10477 | CROUSE HINDS 4W/4P PLUG SEECRS | 1 | |
| T05640 | FILLER PLUG WELD MACHINING TOOL | 1 | |
| T05640-5 | FILLER PLUG WELD MACHINING TOOL | 1 | |
| T05640-6 | FILLER PLUG WELD MACHINING TOOL | 1 | |
| T101559-3 | PLUG M/R HUB GRIP SPACING | 1 | |
| T103310-105 | PLUG FREEWHEELING ASSEMBLY | 1 | |
| T1803 | SPANER CHARGING PLUG | 1 | |
| T1A-113 | ENGINE INTAKE & EXHAUST PLUG SET, includes Generator Inlet Plugs (set of 6) | 1 | |
| T1A-121 | EXHAUST PLUGS (set of 2) | 1 | |
| T28-115 | EXHAUST PLUGS (set of 6) | 1 | |
| T2PP | PLUG, PIPE THREAD GAGE PORT T2PP | 1 | |
| T302832 | DRIVER PLUG BEARING AND PUSHING | 1 | |
| T302833 | DRIVER PLUG BEARING AND BUSHING | 1 | |
| T302842 | DRIVER PLUG BEARING AND BUSHING | 1 | |
| T3159-016 | LEE PLUG PUNCH | 1 | |
| T3159-16 | Lee Plug Punch | 1 | |
| T3203-016 | Lee Plug Punch | 1 | |
| T33-200 | EXHAUST PLUG | 1 | |
| T33-201 | EXHAUST PLUG, folding type | 1 | |
| T37-200 | EXHAUST PLUGS (set of 2) | 1 | |
| T38-210 | EXHAUST PLUGS (set of 2) | 1 | |
| T45-200 | EXHAUST PLUG | 1 | |
| T51-100 | CHIN SCOOP PLUG | 1 | |
| T6-110 | CHIN SCOOP PLUG (on belly of cowling) | 1 | |
| T6-130 | EXHAUST PLUG | 1 | |
| T813689 | FILLER PLUG WELD MACHINING TOOL | 1 | |
| T898869-10 | PLUG, HYDROSTATIC TEST, FILL FITTING | 1 | |
| T93647 | Welch Plug Assembly Tool | 1 | |
| TAT004 | CANNON PLUG STRAP WRENCH | 1 | |
| TCX-103 | EXHAUST PLUG | 1 | |
| TDC14125 | SPARK PLUG HOLE CHASER | 1 | |
| TE65-51575-2 | PLUG RAM AIR DUCT LH RH | 1 | |
| TE65B40403 | TEST EQUIPMENT - ELECTRICAL/ELECTRONIC EQUIPMENT COOLING SYSTEM EXHAUST DUCT SEAL PLUG | 1 | |
| TE65B92408 | PLUG - TEST, FUEL SHUTOFF VALVE | 1 | |
| TEM-200 | EXHAUST PLUG | 1 | |
| TF949991-121 | PATCH PLUG | 1 | |
| TI2007-208 | DC CABLE WITH AVIATION PLUG | 1 | |
| TL1101 | TEST PLUG HYDRAFLOW 24964 | 1 | |
| TLH101 | TAP LH 5/16-18 NC PLUG | 1 | |
| TLH102 | TAP LH 3/8-16 NC PLUG | 1 | |
| TLH103 | TAP LH 7/16-14 NC PLUG | 1 | |
| TLH104 | TAP LH 1/2-13 NC PLUG | 1 | |
| TLH107 | TAP LH 3/8-24 NF PLUG | 1 | |
| TLH108 | TAP LH 7/16-20 NF PLUG | 1 | |
| TLH111 | TAP LH 4-40 NC PLUG | 1 | |
| TLH112 | TAP LH 6-32 NC PLUG | 1 | |
| TLH113 | TAP LH 8-32 NC PLUG | 1 | |
| TLH114 | TAP LH 10-24 NC PLUG | 1 | |
| TLH116 | TAP LH 12-24 NC PLUG | 1 | |
| TM2058G001 | MAGPLUG WEIGHT TESTER | 3 | |
| TM4149G001 | DRAIN PLUG HP PUMP | 1 | |
| TM6940G001 | MASS MODULE 01 ACCESSORY GEARBOX EQUIPMENT - MECHANICAL MAGNETIC PLUG - MAGNETISM | 3 | |
| TOOLEGIN10 | TL TOOLEGIN AIR HOSE FITTINGS 1/4" AIR COUPLER & PLUG KIT,36 PIECES QU | 1 | |
| TP88 | PLUG,PROTECTIVE,THREADED,MALE | 2 | |
| TRA-115 | INTAKE PLUG WITH OIL COOLER SCOOP PLUG, connected w/ lanyard (402) (set of 2) | 1 | |
| TRA-116 | INTAKE PLUG with OIL COOLER SCOOP PLUG, connected w/ lanyard (set of 2) | 1 | |
| TRA-117 | INTAKE PLUG with OIL COOLER SCOOP PLUGS, connected w/ lanyard (set of 3) | 1 | |
| TRA-120 | EXHAUST PLUGS (turbine engine models), specify 402/502B, 602 or 802 (set of 2) | 1 | |
| TRI-ACCY-USBPWR-AUS-PLUG | TRI-ACCY-USBPWR-AUS-PLUG;Australian Power Adapter for USB Charger | 1 | |
| TS11-300 | EXHAUST PLUG | 1 | |
| TSF5T-52001-15 (IFREQ’D) | PLUG, AIRSTAIR HANDLE HOLE (IFREQ’D) | 1 | |
| TSF5T-52001-9 | PLUG, FWD LAVATORY GALLEY EXHAUST VENT | 1 | |
| TSJ-1544341-12 | TEST PLUG FOR THERMAL RELIEF VALVE | 1 | |
| Thread Gauges | Screw Thread Plug Gauges | 1 | |
| U03A-320000 | SHORTING PLUG NLG WEIGHT SWITCH | 1 | |
| U1781A | TEST LEAD SET CROCODILE CLIP, 4MM DOUBLE BANANA PLUG, SHROUDED, BLACK, RED | 1 | |
| U21-110 | HEAT EXCHANGER INLET PLUGS (set of 2) | 1 | |
| U21-125 | HEATER AIR INLET PLUG (ON NOSE, PORT SIDE, AFT OF PITOT) | 1 | |
| U21-130 | EXHAUST PLUGS (set of 2) | 1 | |
| UH60-101 | ENGINE AIR INLET PLUGS, with safety lip (set of 2) | 1 | |
| UH60-102 | ENGINE AIR INLET PLUGS, with small inlet plugs (set of 6) | 1 | |
| UH60-103 | ENGINE AIR INLET PLUGS (HIRSS Type), with safety lip (set of 2) | 1 | |
| UH60-109 | HH-60, ECS INTAKE PLUG, each | 1 | |
| UH60-152 | ENGINE EXHAUST PLUGS (HIRSS type) (set of 2) | 1 | |
| UH60-157 | ENGINE EXHAUST PLUGS (set of 2) | 1 | |
| UH60-160 | APU EXHAUST PLUG | 1 | |
| UH60-170 | HEATER INLET PLUG | 1 | |
| UH60-612 | TAIL ROTOR GEARBOX HAND HOLD PLUG | 1 | |
| UH72-125 | EXHAUST PLUGS (set of 2) | 1 | |
| UH72-130 | FRESH AIR INLET PLUGS, on belly of nose (set of 2) | 1 | |
| UT1152 | WRENCH SOCKET,IGNITER PLUG REMOVAL | 8 | |
| UT1840 | DATA ENTRY PLUG ANALYSER HANDHELD UNIT | 3 | |
| UT2075 | THE PROGRAMMER - DATA ENTRY PLUG- ROLL UP A330 | 1 | |
| UT3107 | PROGRAMMER FOR THE DATA ENTRY PLUG | 1 | |
| V2505-08-005 | COVER PLUG (IDG DRAIN HOSE PLUG) | 3 | |
| V2505J08-003 | COVER PLUG (IDG DRAIN HOSE PLUG) | 5 | |
| V2506-06-005 | Plug/Chain Assembly, Size -6, For Oil Fill Push-Pull Couplings | 6 | |
| VAM-200 | EXHAUST PLUG | 1 | |
| VIK-130 | EXHAUST PLUGS (set of 2) | 1 | |
| VP10 | BATTERY CHARGER AND PLUG (UK / EU) | 2 | |
| W0A30M | CABLE: OUTPUT,400HZ,30FT, MULTIPLE CONDUCTOR,W/PLUG | 3 | |
| WCI-1700-20QCE | PULLER KNOCKER HPT BOROSCOPE PLUG. | 2 | |
| WEEA53440FZB | 1/4 HIFLO BLSWVL PLUG 1/4 MNPT | 1 | |
| WEEA53457FZ | 7PC ZILLA HIFLO CPLER/PLUG KIT | 1 | |
| WEEA53657FZ | 7PC ZILLA HIFLO CPLER/PLUG KIT | 1 | |
| WL15L96A | PLUG - BYPASS & EXHAUST | 7 | |
| WL19D93 | PLUG EXHAUST ENGINE | 2 | |
| WL21D93 | PLUG THRUST REVERSER | 2 | |
| WL22D93 | PLUG EXHAUST ENGINE | 3 | |
| WL25D93 | PLUG-DISCHARGE | 1 | |
| WL29D93 | PLUG THRUST REVERSER | 1 | |
| WP-N-GN | OREI Universal 2 in 1 Plug Adapter Type N for Brazil High Quality CE Certified-RoHS Compliant WP-N-GN | 1 | |
| WSTIG-50 | TIG TORCH12.5FT C/W ADR & PLUG | 1 | |
| WT-001619 | PLUG, HYDROSTATIC TEST, FILL FITTING | 1 | |
| WT-00360 | PLUG, HYDROSTATIC TEST PLUG, FILL FITTING | 1 | |
| WT-00444 | PLUG, HYDROSTATIC TEST, SWITCH FITTING | 1 | |
| WT-00695 | PLUG, HYDROSTATIC TEST, FILL FITTING | 1 | |
| WT-00773-1 | PLUG, HYDROSTATIC TEST, SWITCH FITTING | 1 | |
| WT-00773-2 | PLUG, HYDROSTATIC TEST, SWITCH FITTING | 1 | |
| WT-00848-2 | WRENCH, SPANNER, PLUG ASSEMBLY | 1 | |
| WT-01620 | PLUG, HYDROSTATIC TEST, FILL FITTING | 1 | |
| WT-0444 | PLUG/ SWITCH FITTING | 1 | |
| WT-898869-10 | PLUG, HYDROSTATIC TEST, FILL FITTING | 1 | |
| WW-12 | CAPLUG, SHIPPING | 1 | |
| X-BBJ-10 | Exhaust Plug - Left Hand | 1 | |
| X-BBJ-11 | Exhaust Plug - Right Hand | 1 | |
| X-BBJ-20 | Hot Exhaust Plug | 1 | |
| X-BBJ-30 | Hot Exhaust Plug | 1 | |
| X9381932 | PLUG, TURBINE WHEEL | 1 | |
| XC-80-100-0191 | IGTC HOLE PLUG | 1 | |
| Y3-130 | EXHAUST PLUGS (set of 12) | 1 | |
| Y52-105 | OIL COOLER INLET PLUG (under right wing) | 1 | |
| Y9-200 | EXHAUST PLUGS (set of 12) | 1 | |
| YAD934 | PLUG FOR PBC4828-PARTS WASHER | 1 | |
| YAK5-200 | EXHAUST PLUGS (set of 12) | 1 | |
| ZC-M2-B/1-50K | Adaptor, Rohmann M2, Accepts MIZ-20/22 4-pin Cannon Plug, LF Bridge | 1 | |
| ZC-M2-R | Adaptor, Rohmann M2, Accepts MIZ-20/22 4-pin Cannon Plug, Reflection | 1 | |
| k38002-1 | DISPATCH PLUG – VACUUM WASTE TOILET BOWL | 11 | |
| lC6096 | GAGE, IMMERSION DEPTH-IGNITER PLUG | 1 | |
| lC6837 | WRENCH SET, INSTALL & REMOVE LPTR FD SHAFT PLUG | 1 | |
| C36001-70 | PLUG WITH 0.032 INCH HOLE AN4 | 3 | |
| J26007-1 | TEST PLUG CARGO SMOKE HEATER TEST BOX | 7 | |
| WE-075651 | TORQUE WRENCH WITH PLUG FOR REPLACEABLE NOZZLES (0 - 17 NM) | 1 | |
| 99D24003000001 | ELECTRICAL TEST PLUG,USED TO TEST THE VO | 6 | |
| PWA28966 | WRENCH-BORESCOPE PLUG REMOVE INSTALL | 2 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
