| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| MS9954-08 | PLUG, | 12 | |
| N2485-02 | PLUG, | 2 | |
| R71G5E | PLUG, | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 0000100690 | PLUG,THREADED | 1 | |
| 0050-L-105 | Body Plug, 1/2"LDP Valve | 1 | |
| 0108089 | PLUG,SPECIAL | 1 | |
| 0235237730 | PLUG, MAGNECTIC | 1 | |
| 0301040870 | PLUG, SUPPORT | 1 | |
| 0319727970 | PLUG,DRAIN | 1 | |
| 0390110020 | PLUG,BREATHER | 1 | |
| 07-010008 | CABLE, BNC TO MCX RIGHT ANGLE PLUG, 6' LENGTH | 2 | |
| 09P3268 | PLUG,SPECIAL | 1 | |
| 1/8 -27 ANPT | PLUG, HYDROSTATIC TEST PLUG, GAUGE FITTING | 1 | |
| 10-101950-081 | SHUNT PLUG, CGO | 13 | |
| 10-101950-81 | PLUG, SHUNT | 17 | |
| 10013677-S5 8-1 | TEST PLUG, FILL PORT (LEAKAGE TESTING) | 1 | |
| 10013677-S5 8-2 | TEST PLUG, LOW PRESSURE OUTLET (LOW PRESSURE RELIEF TEST) | 1 | |
| 10013677-S5 8-3 | TEST PLUG, LOW PRESSURE OUTLET (LEAKAGE TESTING) | 1 | |
| 10013677-S5 8-4 | TEST PLUG, LOW PRESSURE OUTLET (LEAKAGE TESTING) | 1 | |
| 10013677-S58-1 | TEST PLUG, FILL PORT | 1 | |
| 10013677-S58-2 | TEST PLUG, LOW PRESSURE OUTLET (LOW PRESSURE | 1 | |
| 10013677-S58-3 | TEST PLUG,LP OUTLET | 1 | |
| 10013677-S58-4 | TEST PLUG,LP OUTLET | 1 | |
| 10013677-S58-5 | TEST PLUG, | 1 | |
| 1047787 | PLUG, AIRCRAFT, DC, TLD (REQUIRED FOR MODEL NO: GPU-409-E-CUP-28) | 1 | |
| 10C1335 | PLUG, PROGRAMING FADEC | 1 | |
| 11-10026 | PLUG, INSULATOR | 1 | |
| 11-10792 | KIT, IGNITER, PLUG, GAUGE | 2 | |
| 119.056 | HEAT GUN, WELDY PRO, EURO PLUG, 550°C, 230 V, 1800 W | 1 | |
| 11B36-11930 | TOOL, 16WR PLUG, PRESSURE SWITCH, A320 | 1 | |
| 12U906 | SPARK PLUG, RN11YC4 | 1 | |
| 1301410015 | PLUG, TYPE B, 115V AC | 1 | |
| 134390/6M/B | CORDPRO, 6M, STRAIGHT TO RIGHT ANGLE PLUG, BLACK | 1 | |
| 134390/6M/R | CORDPRO, 6M, STRAIGHT TO RIGHT ANGLE PLUG, RED | 1 | |
| 135-06794-001 | PLUG,AL | 1 | |
| 1374M12P10 | IGNITER PLUG, MAIN | 1 | |
| 145T05944-401 | AIR INTAKE PLUG, PACK-C | 1 | |
| 145T05944‐401 | AIR INTAKE PLUG, PACK‐C | 1 | |
| 145T06003-401 | AIR INTAKE PLUG, PACK-C BLEED | 1 | |
| 14GP05-070 | (PLUG, FUSIBLE PORT) | 1 | |
| 15-200 | ONEWAY SHUTOFF ARO210 INTRCHG PLUG, 1/4" NPTF MALE THREAD | 2 | |
| 15-50p | Plug, Electrical | 4 | |
| 151-2012 | PLUG, ARTEX ELT TESTER | 10 | |
| 1527T-305332 | GAGE,PLUG,THREAD,GO-NOGO,1"-12UNF,DOUBLE-END,TRU | 1 | |
| 1527T-315333 | GAGE,PLUG,THREAD,GO-NOGO,1"-12UNF,DOUBLE-END,TRU | 1 | |
| 1622M24P01 | PLUG, BORESCOPE, THREADED | 1 | |
| 172-104 | CARB AIR INLET PLUG, oval shape (Early models, 1960-1966) | 1 | |
| 172-108 | CARB AIR INLET PLUG, rectangular shape (Earliest Models ,1959 and before) | 1 | |
| 1956294-A | BK117 TRANSMISSION FILTER BLOCK TEST PLUG, TOOL #39 | 1 | |
| 19857-4064 | PLUG, BLACK RING | 1 | |
| 1AE1N20008 | PLUG, COMMON NOZZLE | 1 | |
| 1AE1N20008 REV B | PLUG, COMMON NOZZLE | 1 | |
| 1AE1N20028 | PLUG, NOZZLE | 1 | |
| 1AE1N20028 REV A | PLUG, NOZZLE | 1 | |
| 1R18908 | Plug, Guide | 1 | |
| 2-100527 | PLUG, SHUNT | 1 | |
| 2-100831-1 | SHUNT PLUG, APU | 11 | |
| 2001116 | LAVATORY COUPLER PLUG, 4-INCH | 1 | |
| 2025229-1 | PLUG, APU EXHAUST | 3 | |
| 205-175 | LOGGER WINDOW BUBBLE PLUG, need tracing | 1 | |
| 206-SP-F-01 | PRESSING PLUG, INNER RING | 1 | |
| 206-SP-F-02 | PRESSING PLUG, DUPLEX BEARING | 1 | |
| 206-SP-F-06 | PRESSING PLUG, LOWER SEAL | 1 | |
| 206B-135 | LOGGER WINDOW BUBBLE PLUG, need tracing | 1 | |
| 208-106 | EXHAUST PLUG, STANDARD FAIRING | 1 | |
| 208-108 | EXHAUST PLUG, WIPAIRE EXHAUST DEFLECTOR | 1 | |
| 212-610 | LOGGER WINDOW BUBBLE PLUG, need tracing | 1 | |
| 21C7352P03 | PLUG, PIPE | 1 | |
| 23 | Tesa 03160017 Mains cable without plug, 2 m for TTA 20 | 1 | |
| 2240 | AUDIO OSCILLATOR,200AB MULTIMETER, 2000A SOUND LEVEL METERB&K TYPE 2219 PHONE PLUG, PJ-051B CAPACITOR, 220 UF ±20%, 50 WVDC RESISTOR, 150-OHM ±5%, 3-WATT | 1 | |
| 214583 | PLUG,PROTECTIVE,DUST AND MOISTURE | 9 | |
| 21C7352P12 | PLUG, FILTER | 1 | |
| 230-990312-868 | JACK & PLUG,GIGABIT LOOPBACK RJ45,MALE/FEMALE | 1 | |
| 250 | PLUG, AUDIO | 9 | |
| 263193 | "SHUNT PLUG, FIRE EXTINGUISHER CARTRIDGE | 23 | |
| 23053696 | Puller – Shaft Plug, Fan Rotor Assembly | 2 | |
| 23054813 | PLUG, FAN SHAFT PULLER PLATE (USE WITH PULLER 23054809). | 2 | |
| 269A9247 | Plug, Cone Installation Used On 269A5050-010 | 1 | |
| 26ME65B00713-1 | SLING - EXHAUST PLUG, ON-WING MAINTENANCE, JT9D ENGINE | 1 | |
| 26WC35PN | CONNECTOR, PLUG, ELECTRICAL | 1 | |
| 28.01.3340 | PLUG, EXTERNAL POWER SUPPLY | 2 | |
| 281599-20 | Plug, Bearing Removing | 1 | |
| 296530-1 | PLUG, FILTER ELEMENT, FUEL CONTROL | 1 | |
| 2A1325 | PLUG, HOSE PRESSURE TEST | 1 | |
| 2A1325-3 | PLUG, HOSE PRESSURE TEST | 1 | |
| 2A1489-1 | PLUG, DIFFUSER 3/4 IN. | 5 | |
| 2A8036 | PLUG, FILLER | 1 | |
| 2C18040G02 | PULLER ASSEMBLY, REMOVE - PLUG, LPT SHAFT (PULLER ASSEMBLY) | 1 | |
| 2C81918 | PLUG, LEAK CHECK B, AXIS-A (B | 1 | |
| 2C81918G01 | PLUG, LEAK CHECK B, AXIS-A (B | 1 | |
| 2C81920 | PLUG, LEAK CHECK D, FILTER (D | 1 | |
| 2C81920G01 | PLUG, LEAK CHECK D, FILTER (D | 1 | |
| 2C81921 | PLUG, LEAK CHECK E, AXIS-A (E | 1 | |
| 2C81921G01 | PLUG, LEAK CHECK E, AXIS-A (E | 1 | |
| 2F10055 | Plug, Vacuum Check | 1 | |
| 2F10331 | PLUG, LEAK TEST | 1 | |
| 2KEX-160 | APU EXHAUST PLUG, (OEM P/N: F2MA910014) | 1 | |
| 4332 | PLUG, CHA 580 INLET ASSEMBLY | 1 | |
| 30096 | CONNECTOR,PLUG,ELECTRICAL | 2 | |
| 30242 | PLUG, VENT | 1 | |
| 31001615 | PLUG, SHUNT | 3 | |
| 3130S62-20-701 | PLUG,STRAINER | 1 | |
| 3403246-1 | PLUG, ENGINE INTAKE | 1 | |
| 347-1100-5GSE | PLUG, NACA SCOOP-EN-GINE AIR INLET | 1 | |
| 350A95728500 | CASE,PLUG,AIR CONDITIONNY SYSTEM | 1 | |
| 365-602-404-0 | PLUG, IGNITION | 1 | |
| 3830DB11217 | Plug, Door Sill Drain Tool | 1 | |
| 3A500-1055 | PLUG, DOME | 1 | |
| 3TE65B001102 | TEST EQUIPMENT - PRESSURE PLUG, JETTISON PUMP SEAL | 1 | |
| 401-4 | PLUG, BALL END | 5 | |
| 405-305 | PLUG, INLET VALVE | 1 | |
| 41090G-32 | DAVID CLARK - ELECTRICAL CONNECTOR KIT 1/4" PLUG, COMMERCIAL, STEREO | 3 | |
| 44008P-08A-E17 | PLUG, COUPLING | 1 | |
| 44012P-12A-E17 | PLUG, COUPLING | 1 | |
| 455-65BNC5006113NE | TERMINATOR COAX CONNECTOR PLUG, MALE PIN BNC 50 OHMS | 1 | |
| 455-65BNC5007133NE | ADAPTER COAXIAL CONNECTOR BNC PLUG, MALE PIN TO BNC JACK, FEMALE SOCKET (2) 50 OHMS | 1 | |
| 49-155 | PLUG, THERMAL RELIEF | 1 | |
| 49-335 | PLUG, ORIFICE | 1 | |
| 4920-00-861-3148 | Test Plug, Seal | 1 | |
| 4GP | PLUG, MS GAGE PORT, WITH O-RING | 1 | |
| 5100857 | Exhaust Plug, APU | 1 | |
| 527S0035-1 | (PLUG, GAUGE PORT) | 1 | |
| 53100141-1 | PLUG,SHUNT | 17 | |
| 53100141-1A | PLUG,SHUNT | 1 | |
| 572-510-9196 | PLUG,DRAIN | 4 | |
| 572-510-9198 | PLUG, MACHINE | 1 | |
| 572-533-9018 | PLUG, FILLER | 3 | |
| 572-8510-9503 | PLUG,DRAIN | 1 | |
| 572-8533-9018 | PLUG, FILLER | 1 | |
| 572-8533-9026 | PLUG, FILLER | 2 | |
| 575194-1 | PLUG, METERED ORIFICE | 1 | |
| 601R262002-1 | SHUNT PLUG, DISCHARGE CARTRIDGE | 1 | |
| 628000 | HANDHELD BLACK LIGHT (EV6000) – P/N: 628000 - TYPE G ADAPTER - MUST HAVE AN AC PLUG, | 2 | |
| 636-4000-23GSE | PLUG, EXHAUST EXIT AREA | 5 | |
| 649-794-604-0 | PLUG, BORESCOPE | 1 | |
| 64906 | PLUG, BEARING, HIGH COMPRESSION CRANKCASE ADQUIRIR | 1 | |
| 65714-1 | PLUG, BURST DISC PORT | 1 | |
| 660-021M12N | COVER - ELECTRICAL PLUG, WITH LANYARD (SHELL SIZE 12) | 1 | |
| 6796641 | GAGE, PLUG, CROSSOVER TUBE | 2 | |
| 6797564 | GAGE - PLUG, PINION GEAR BUSHING | 2 | |
| 6798048 | GAGE--PLUG, PRESSURE OIL PUMP BUSHIN | 1 | |
| 6798049 | GAGE--PLUG, SCAVENGE OIL PUMP BUSHING | 1 | |
| 6897105 | SEAL PLUG, CHECK VALVE SEALS CHECK VALVE BORE DURING FUEL NOZZLE ASSEMBLY TESTS. | 1 | |
| 6898261 | PLUG, ALIGNMENT CHECK FRT. SUPPORT BEARING HOUSING | 2 | |
| 6792401800 | PLUG, MAGNETIC | 1 | |
| 69008-1100 | Parallel Action Handtool for Shielded Plug, Cat 5, 8/8 Circuit, Short Body | 1 | |
| 69008-1101 | Die Set for 690081100, Shielded Plug, Cat 5, 8/8 Circuit, Short Body | 1 | |
| 69008-1103 | Die Set for 690081102, Modular Plug, FCC 68, 8/8 Circuit | 1 | |
| 69008-1104 | Parallel Action Handtool for Shielded Plug, FCC 68, 8/8 Circuit, Short Body | 1 | |
| 69008-1105 | Die Set for 690081104, Shielded Plug, FCC 68, 8/8 Circuit, Short Body | 1 | |
| 69008-1106 | Parallel Action Handtool for Modular Plug, FCC 68, 8/8 Circuit, Long Body | 1 | |
| 69008-1107 | Die Set for 690081106, Modular Plug, FCC 68, 8/8 Circuit, Long Body | 1 | |
| 69008-1118 | Die Set for 690081113, Modular Plug, FFC 68, 6/4 Circuit, Short Body | 1 | |
| 69008-1119 | Die Set for 690081114, Modular Plug, FFC 68, 6/6 Circuit, Short Body | 1 | |
| 69008-1120 | Parallel Action Handtool for Modular Plug, FCC 68, 4/4 Circuit, Short Body | 1 | |
| 69008-1121 | Parallel Action Handtool for Modular Plug, 6/4 Circuit, Short Body | 1 | |
| 69008-1122 | Parallel Action Handtool for Modular Plug, FCC 68, 6/6 Circuit, Short Body | 1 | |
| 69008-1123 | Parallel Action Handtool for Modular Plug, FCC 68, 8/6 Circuit, Short Body | 1 | |
| 69008-1124 | Parallel Action Handtool for Modular Plug, FCC 68, 8/8 Circuit, Short Body | 1 | |
| 69008-1125 | Die Set for 690081120, Modular Plug, FCC 68, 4/4 Circuit, Short Body | 1 | |
| 69008-1126 | Die Set for 690081121, Modular Plug, 6/4 Circuit, Short Body | 1 | |
| 69008-1127 | Die Set for 690081122, Modular Plug, FCC 68, 6/6 Circuit, Short Body | 1 | |
| 69008-1129 | Die Set for 690081124, Modular Plug, FCC 68, 8/8 Circuit, Short Body | 1 | |
| 69008-1184 | Handtool for Telecom Plug, Type C Crimp with Diameter 6.0 Cable | 1 | |
| 69008-1185 | Die Set for Telecom Plug, Type C Crimp with Diameter 6.0 Cable | 1 | |
| 69008-1192 | Handtool for Telecom Plug, Type C Crimp with Diameter 6.0 Cable | 1 | |
| 69008-1193 | Die Set for Telecom Plug, Type C Crimp and Diameter 6.0 Cable | 1 | |
| 69020-0140 | Arbor Press Fixture for Modular Plug, FCC 68, Short Body, 8/8 Circuit | 1 | |
| 6GP | PLUG, FUSIBLE PLUG PORT, WITHO-RING | 1 | |
| 704-2659-001 | PLUG, LOAD | 1 | |
| 704A34543015 | PLUG, MAGNETIC | 1 | |
| 70700-20500-043 | PLUG, ENGINE EXHAUST | 1 | |
| 70700-20502-043 | PLUG, APU EXHAUST | 1 | |
| 70700-77106-044 | PLUG, ENGINE INLET | 1 | |
| 70700-77108-042 | PLUG, EXHAUST FAN SO COOLING | 1 | |
| 717-001 | PLUG, 1/4 OD W/ O-RING | 2 | |
| 8011453-508 | PLUG,WASHER | 1 | |
| 806464-S58- 3 | TEST PLUG, TOP PORT (LEAKAGE TESTING) | 1 | |
| 806464-S58-1 | TEST PLUG,TOP PORT | 1 | |
| 806464-S58-3 | TEST PLUG, TOP PORT (LEAKAGE TESTING) | 1 | |
| 815315-1 | PLUG, PROTECTIVE | 1 | |
| 83330670-1 | PLUG, HYDROTEST | 1 | |
| 83330670-2 | PLUG, HYDROTEST | 1 | |
| 83330679-2 | PLUG,MACHINE THREAD | 2 | |
| 834275 | PLUG, SOLENOID PORT | 1 | |
| 85106RC08-04PB | PLUG, ELECTRICAL | 1 | |
| 85643011P01 | PLUG， PULLER - AFT ROTATING AIR/OIL SEAL | 1 | |
| 856A2401 | PLUG, RETENTION - RADIAL DRIVE SHAFT LOWER PART | 1 | |
| 856A2401 REV NC | PLUG, RETENTION-RADIAL DRIVE SHAFT LOWER PART | 1 | |
| 856A2401P01 | PLUG, RETENTION, - RADIAL DRIVE SHAFT LOWER PART | 3 | |
| 856A2945 | PLUG, LOCATE | 1 | |
| 856A2945G01 | PLUG, LOCATING - CENTER VENT TUBE (LOCATING PLUG) | 4 | |
| 856A3011 | PLUG, PULLER - AFT ROTATING AIR/OIL SEAL (PULLER PLUG) | 1 | |
| 856A3011P01 | Plug, Puller - Aft Rotating Air/Oil Seal (puller plug) | 10 | |
| 856A3101G02 | Plug, Locating - Center Vent Tube (locating plug) | 9 | |
| 856A3114G01 | PLUG, PULLER - AFT ROTATING | 13 | |
| 856A3260 | PLUG, EXTRACTION LPT SHAFT | 1 | |
| 856A3260G02 | Plug, Extraction - Main Components, LPT Shaft (extraction plug) | 10 | |
| 856A3557G01 | TOOL, D-SEAL FITTING, MAGNETIC PLUG, LUBRICATION UNIT | 22 | |
| 856A3617G01 | PULLER MAGNETIC PLUG, LUB UNIT CFM56 | 32 | |
| 856A3617G02 | PULLER - MAGNETIC PLUG, LUBRICATION UNIT | 1 | |
| 857641-2170 | A30 HEADSET, XLR5 PLUG, W/O BT, FLEX | 1 | |
| 895810 | THRUST REVERSER PLUG, SPL-10699 | 1 | |
| 901-266-618-101 | TEST PLUG, FUEL SYSTEM | 1 | |
| 9299M96G06 | PLUG, BORESCOPE STG 1 | 1 | |
| 9441M11 | PLUG, PRESSURE TEST | 1 | |
| 9441M11G01 | PLUG, PRESSURE TEST | 1 | |
| 9441M29 | PLUG, PUSHER GEAR SHAFT | 1 | |
| 9441M29 REV D | PLUG, PUSHER GEAR SHAFT | 1 | |
| 9441M52 | PLUG, SPLINED-TORQUE | 1 | |
| 9441M52 REV B | PLUG, SPLINED-TORQUE | 1 | |
| 9441M60 | PLUG, PRESSURE TEST | 1 | |
| 9441M60G01 | PLUG, PRESSURE TEST | 1 | |
| 9501501-4400 | PLUG, TEST - LEAK TESTER | 2 | |
| 9523976 | PLUG, PROTECTIVE | 1 | |
| 9550177210 | MAGNETIC PLUG,ELECTRICAL | 1 | |
| 9550177330 | MAGNETIC PLUG,ELECTRICAL | 1 | |
| 9550177620 | MAGNETIC PLUG,ELECTRICAL | 1 | |
| 9560132100 | MAGNETIC PLUG,MECHANICAL | 1 | |
| 9560163300 | PLUG,PROTECTION | 1 | |
| 9560163320 | PLUG,PROTECTION | 1 | |
| 9560168100 | MAGNETIC PLUG,MECHANICAL | 1 | |
| 9560171170 | MAGNETIC PLUG,MECHANICAL | 2 | |
| 9560171180 | MAGNETIC PLUG,MECHANICAL | 1 | |
| 9561490090 | PLUG, U2 THREADED | 1 | |
| 9610059170 | PLUG, PROTECTION | 1 | |
| 9680M73G03 | PLUG, BORESCOPE S2 | 1 | |
| 9686M80P01 | PLUG, BORESCOPE, THREADED | 1 | |
| 9786510100 | PLUG,THREADED | 1 | |
| 9786512100 | PLUG,THREADED | 1 | |
| 9897060031 | PLUG, THREADED | 1 | |
| 98A10009001000 | PLUG, APU EXHAUST | 1 | |
| 98A10009002000 | PLUG, APU SURGE AIR OUTLET | 1 | |
| 98A10009004000 | PLUG, APU FAN AIR INTAKE | 1 | |
| 98A10009005000 | PLUG, APU OIL COOLER | 1 | |
| 98A10009006000 | PLUG, APU GEN OUTLET | 1 | |
| 98A10009007000 | PLUG, APU FAN AIR INTAKE | 1 | |
| 98A10009008000 | PLUG, APU EXHAUST DUCT | 1 | |
| 98A10009009000 | PLUG, APU OIL COOLER | 1 | |
| 98D26203002044 | Plug, Fire Ext. Test Set | 7 | |
| 98D26203002062 | PLUG, ENGINE FIRE EXTINGUISHER SYSTEM TEST TOOL | 3 | |
| 98D26203002064 | PLUG, ENGINE FIRE EXTINGUISHER SYSTEM TEST TOOL | 3 | |
| 98F10103001000 | PLUG, ANTI-ICE OUTLET AIR INTAKE | 5 | |
| 98L10109001000 | PLUG, APU EXHAUST DUCT | 2 | |
| 98L10109002000 | PLUG, APU COOLING INLET | 2 | |
| 98L1010H002-001 | PLUG, FC AOC OUTLET | 1 | |
| 98L36103002054 | PLUG, HYDRAULIC PRESSURE - ENGINE BLEED TEST SET | 5 | |
| 98L36103002060 | PLUG,, ENGINE BLEED TEST SET | 4 | |
| 991-4-14607-003 | ADAPTOR-PLUG,PRESSURE GAUGE | 1 | |
| 999-3001-12GSE | PLUG, A220 ENGINE BYPASS | 1 | |
| 999-4100-5GSE | PLUG, A220 ENGINE EXHAUST | 1 | |
| 9992M86G08 | PLUG, ASSY-BORESCOPE | 1 | |
| 99F28304000000 | DUMMY PLUG, VALVE ACTUATOR DEACTIVATION | 8 | |
| 99F28304001000 | PLUG, DEACTIVATION, POSITION SIMULATION | 14 | |
| A26004-2 | Plug, Discharge Nozzle (3) | 2 | |
| A30002-1 | TEST PLUG,AIRCRAFT COMPONENT | 5 | |
| A319-205 | EXHAUST NOZZLE PLUG, IAE V2500 engine, equivalent to IAE P/N: IAE1N20008 (each) | 1 | |
| A320-205 | EXHAUST NOZZLE PLUG, each, IAE V2500 engine, equivalent to IAE P/N: IAE1N20008 | 1 | |
| A38007 | PLUG,VACUUM WASTE SYSTEM | 1 | |
| A38007-1 | PLUG, VACUUM WASTE SYSTEM | 11 | |
| A38007-9 | PLUG, VACUUM WASTE SYSTEM | 12 | |
| AB26001-T5I | PLUG,SHUNT (**ON A/C 101-200) | 1 | |
| ACS28010 | PLUG, OIL COOLER VENT SCOOP | 4 | |
| ACS87001 | PLUG, ENGINE INTAKE AND EXHAUST | 3 | |
| AGE-04091-001 | TEST PLUG,PRESSURE | 1 | |
| AGE-04091-003 | TEST PLUG,PRESSURE | 1 | |
| AGE-04091-401 | TEST PLUG, PRESSURE | 4 | |
| AGE13174 | PLUG, RELIEF VALVE | 2 | |
| AGE14890 | PLUG, VALVE, DUMMY RELIEF | 1 | |
| AGE15825 | PLUG, SHIM | 1 | |
| AN806D6 | PLUG, FLARED | 6 | |
| AN814-10 | PLUG, BLEEDER | 4 | |
| AO107251 | PLUG, ALIGNMENT | 1 | |
| AVTB73MAPU | APU EXHAUST PLUG, 737MAX | 2 | |
| B1B-101 | INTAKE PLUG, (EACH) | 1 | |
| B28005-42 | PLUG,PRESSURE TEST | 8 | |
| B717-805 | WASH PREP: Exhaust Vent PLUG, left side, aft of Lg. Pressure Gate | 1 | |
| B717-806 | WASH PREP: Aft Air Inlet PLUG, on tail, center, Dorsal Ram Air Plug | 1 | |
| B717-816 | APU Shroud Cooling Air Inlet Plug, small circular inlet above PAC A/C Exhaust opening on aircraft right | 1 | |
| B717-817 | APU Compartment Cooling Inlet Plug, small circular inlet | 1 | |
| B737-273 | APU INTAKE PLUG, 300-500 models - SET OF 1 | 1 | |
| B737-277 | APU EXHAUST PLUG, MAX models - SET OF 1 | 1 | |
| B757-280 | EXHAUST VENT PLUG, (left side fwd of APU exhaust) | 1 | |
| B78016-6 | CHECKING PLUG, | 4 | |
| BN-MCX6 | Cable, BNC to MCX Plug, Straight, 6' length | 1 | |
| BN-MCXR6 | CABLE, BNC TO MCX RIGHT ANGLE PLUG, 6' LENGTH | 1 | |
| C130-100 | ATM COOLING INLETPLUG, SHIELD | 1 | |
| C270CP | Sesame Technologies C270CP Oil Cooler Plug, For Aircraft | 2 | |
| C27APU0CP | Sesame Technologies C27APU0CP Auxiliary Power Unit Oil Cooler Plug, For Aircraft | 2 | |
| C27APUEP | Sesame Technologies C27APUEP Auxiliary Power Unit Exhaust Plug, For Aircraft | 2 | |
| C27FEPP | Sesame Technologies C27FEPP Fod Ejection Port Plug, For Aircraft | 2 | |
| C38001-1 | PLUG, DRAIN MAST | 4 | |
| C38001-23 | Drain Mast Plug, Waste Water | 11 | |
| C38001-29 | TOOL, DRAIN MAST PLUG, | 13 | |
| C700-101 | INTAKE PLUG, folding type (set of 2) | 1 | |
| CAS-100 | ENGINE INLET PLUG, HA-200 | 1 | |
| CBG-10-2-N-1 | GAGE, PLUG, PLAIN CYLINDRICAL | 2 | |
| CH31964 | PLUG, IGNITION | 1 | |
| CH47-175 | LOGGER WINDOW BUBBLE PLUG, need tracing | 1 | |
| CO255 | 2 WIRE LEAD, 3 PINS MALE PLUG, KELVIN CROCODILE CLIP FOR RCP2A | 1 | |
| CP1765-2 | DC PLUG, | 2 | |
| CT475AV | CLEANER & TESTER: SVC UNIT,SPARK PLUG, 110V,60HZ,35W | 4 | |
| CVN-100 | INTAKE PLUG, lower rotor mast | 1 | |
| D38999 | CONNECTOR, PLUG, ELECTRICAL | 1 | |
| D38999-33W9R | CAP-PROTECTIVE, D38999 PLUG, SHELL SIZE 9 | 3 | |
| D38999/26WC35PN | CONNECTOR, PLUG, ELECTRICAL | 1 | |
| D730L | PLUG, DRAIN HOSE ASSY | 1 | |
| DEP6000MK3 | Plug, Data Entry | 4 | |
| DO7010-251 | 4 W2 WIRE PROBE, 4 PIS MALE PLUG, COINCENTRIC TIPS, LENGTH - 150MM | 1 | |
| DO7010-255 | 2 WIRE LEAD, 3 PINS MALE PLUG, KELVIN CROCODILE CLIP | 1 | |
| DO7010-258 | 2 WIRE PROBE, 4 PINS MALE PLUG, CONCENTRIC TIPS, LENGTH - 180MM | 1 | |
| DRT59360-6 | TOOL-SEALING PLUG,ASSY | 1 | |
| E135-710 | ENGINE EXHAUST PLUGS, exhaust & aft doghouse plug, P2 models (set of 3) | 1 | |
| EG16104-511 | 6CAPlug, Placard 2Hose (no box) | 1 | |
| F16-100 | INTAKE PLUG, narrow mouth, bi-fold type, NSN 1730-01-542-3476 "COVER SET,AIRCRAFT SHIPPING" | 1 | |
| F16-102 | INTAKE PLUG, w/ forms pouch, narrow mouth | 1 | |
| F16-105 | INTAKE PLUG, block 40 models, bi-fold type (wide mouth) | 1 | |
| F16-107 | INTAKE PLUG, block 50 models, bi-fold type (wide mouth) | 1 | |
| F16-120 | INTAKE PLUG, wide mouth, bi-fold type | 1 | |
| F16-122 | INTAKE PLUG, w/ forms pouch, wide mouth | 1 | |
| F16-201 | EXHAUST PLUG, block 32 models, PW F100-220 engine | 1 | |
| F16-205 | EXHAUST PLUG, block 30 models, GE 110 engine | 1 | |
| F16-206 | EXHAUST PLUG, block 50 models | 1 | |
| F16-207 | EXHAUST PLUG, block 52 models | 1 | |
| F16-208 | EXHAUST PLUG, block 40 models | 1 | |
| F16-209 | EXHAUST PLUG, FOLDING TYPE, specify model | 1 | |
| F16-212 | EXHAUST PLUG, block 25 models | 1 | |
| F16-213 | EXHAUST PLUG, block 42 models | 1 | |
| F35-200 | EXHAUST PLUG, A, B, C models | 1 | |
| F35-210 | EXHAUST PLUG, A, B, C models (folding type) | 1 | |
| F70146-12 | PLUG, AIR CONDITION | 3 | |
| F72938-1 | PLUG, 727-200 | 3 | |
| F72938-2 | PLUG, 727-100 | 1 | |
| F80076 | Plug,Exhaust, APU | 1 | |
| F80076-1 | Plug, Auxiliary Power Unit Exaust | 10 | |
| F80080-101 | Test Equipment - Vent Plug, Structural | 1 | |
| F80080-112 | Test Equipment - Plug, Drain Valve | 1 | |
| F80080-88 | Test Equipment - Access Closure Plug, Vent Scoop | 2 | |
| F80080-92 | Test Equipment - Vent Plug, Center Tank | 1 | |
| G10005-23 | PLUG, EXHAUST | 4 | |
| G28012-2 | PLUG,C-CLAMP | 1 | |
| G28012-6 | PLUG,SCREW CLAMP | 1 | |
| G28018-16 | PLUG, 80A | 1 | |
| G38002-2 | Blanking plug, set | 2 | |
| G5-130 | APU EXHAUST PLUG, NSN 1730-01-667-2956 | 1 | |
| G600-100019-23 | PLUG, FUEL | 3 | |
| G600-100019-23 | PLUG, FUEL | 3 | |
| G600-100025-1 | PLUG, ENVIRONMENT CONTROLUNIT EXHAUST | 3 | |
| G601-100005-15 | PLUG, INTAKE, APU | 1 | |
| G601-100006-19 | PLUG, APUEXHAUST | 2 | |
| G601-100007-19 | PLUG, HEAT EXCHANGER, EXHAUST | 2 | |
| G601-100007-19 | PLUG, HEAT EXCHANGER, EXHAUST | 2 | |
| G601-100010-1 | PLUG, ENGINE EXHAUST, RIGID | 5 | |
| G601-100035-17 | PLUG, FUEL JETTISON T-TANK | 3 | |
| G601-10005-15 | PLUG, INTAKE, APU | 1 | |
| G601R101207-1 | PLUG, ENV CONTROL UNIT, EXHAUST | 9 | |
| G601R101209-1 | PLUG, EXHAUST, APU | 5 | |
| G601R101211-1 | PLUG, INTAKE, RAM AIR | 6 | |
| G601R101215-1 | PLUG, COOLING INTAKE, APU | 5 | |
| G601R101217-1 | PLUG, APU COOLING EXHAUST | 3 | |
| G601R242303-1 | SHORTING PLUG, ADG AUTO DEPLOYEMENT | 7 | |
| G601R242304-1 | SHORTING PLUG, ADG AUTO DEPLOYEMENT | 4 | |
| G601R262002-1 | PLUG, SHUNT | 8 | |
| G601R381002-13 | PLUG, BLANKING DRAIN MAST | 2 | |
| G604-101049-1 | PLUG, INTAKE, RAM AIR | 3 | |
| G604-101049-1 | PLUG, RAM INTAKE | 3 | |
| G604-101064-1 | PLUG, APU, DRAIN | 2 | |
| G604-101065-17 | PLUG, APU INTAKE | 3 | |
| G604-101065-17 | PLUG, APU INTAKE | 3 | |
| G700-101209-1 | PLUG, APU EXHAUST | 1 | |
| G700-101214-1 | PLUG, ECU EXHAUST | 1 | |
| G700-101228-19 | KIT − PLUG, NACA SCOOP (FUSELAGE) | 3 | |
| G700-101229-12 | PLUG, RAM AIR INLET BYPASS | 1 | |
| G700-101233-1 | PLUG, EXHAUST | 1 | |
| G700-101236-1 | KIT, PLUG, NACA SCOOPS, FUSELAGE | 2 | |
| G700-381201-25 | PLUG, DRAIN MAST | 3 | |
| G700−101228−19 | KIT − PLUG, NACA SCOOP (FUSELAGE) | 3 | |
| GD-D1016-51PL-12 | PLUG, ATTACHMENT | 1 | |
| GIL-101 | CARB INLET PLUG, model 200 | 1 | |
| GS10414-4 | PLUG, SHIPPING | 1 | |
| GS10414-5 | PLUG, SHIPPING | 2 | |
| GS10414-6 | PLUG, SHIPPING | 1 | |
| GS12958-1 | PLUG,TEST | 1 | |
| GS13237-1 | TEST PLUG,AIRCRAFT | 4 | |
| GS13238-1 | TEST PLUG,AIRCRAFT | 2 | |
| GS13254-1 | TEST PLUG,AIRCRAFT | 3 | |
| GS13255-1 | TEST PLUG,AIRCRAFT | 3 | |
| GS13358-1 | PLUG, TEST | 2 | |
| GS13842-1 | TEST PLUG,AIRCRAFT | 2 | |
| GS13855-1 | PLUG, SEALING | 1 | |
| GS13958-1 | PLUG, TEST | 1 | |
| GS14681-1 | PLUG, TEST | 1 | |
| GS15565-4 | PLUG, PRESSURE TEST | 1 | |
| GS16192-1 | PLUG,CONTAMINATION | 1 | |
| GS19810-1 | PLUG, MOUNTING BOLT | 1 | |
| GS20686-1 | CAP-PLUG, PROTECTIVE | 2 | |
| GS21384-1 | PLUG, VACUUM TEST | 1 | |
| GS21385-1 | PLUG, VACUUM TEST | 1 | |
| GS21552-1 | PLUG, LEVER VALVE | 1 | |
| GS22035-1 | PLUG, GAGE | 1 | |
| GS47219 | PLUG,WASHER | 1 | |
| GYP00 | PLUG, PASSAGE BALL | 1 | |
| H-1770 | PLUG, LAVATORY DRAIN | 3 | |
| H-2232 | PLUG, KOHLER SPARK | 1 | |
| H0025 | PLUG, BLANKING | 1 | |
| H25-IR | PLUG, HYDROSTATIC TEST PLUG, FILL FITTING | 1 | |
| H3312 | HEADSET: GSE,W/MUFF,25FT CORD, PJ-051 PLUG,W/PTT | 13 | |
| HA-51-000-TT0262 | PLUG, ECS EXHAUST | 4 | |
| HBL5266C | HUBBELL WIRING DEVICE-KELLEMS HBL5266C Straight Blade Male Plug, 15A, IP20 Rated, 3 Contacts | 1 | |
| HCS1202 | PLUG, 250V 15A 2P 3W | 4 | |
| HCS2010-25 | TC, TYPE J TEFLON, RED, 10FT, MOLDED PLUG, 24 AWG WITH STD SIZE PLUG, STRAIN RELIEF, 1/4" PARALLEL B | 2 | |
| HIX6002 | HALF PLUG, RIGHT-THRUST REVERSER | 11 | |
| HIX6003 | HALF PLUG, LEFT-THRUST REVERSER | 10 | |
| HIX6003-0G | HALF PLUG, LEFT-THRUST REVERSER | 3 | |
| HS7544 | MECHANICAL PULLER - TEST FLOW PLUG, PUMP HOUSING | 1 | |
| HS9295 | MICARTA PLUG, PROP DOME | 4 | |
| HU19036-1 | EXTRACTOR - BORESCOPE PLUG, IMPACT (SLIDE HAMMER) | 13 | |
| HU28096/1 | GAUGE - PROTRUSION, IGNITER PLUG, RB211-524G/H ENGINES | 10 | |
| HU39037-1 | GAUGE - PROTRUSION, IGNITER PLUG, RB211-524GT/HT ENGINES | 14 | |
| IAE-200 | EXHAUST PLUG, equivalent to IAE P/N: IAE1N20008 (each) for Airbus A319/A320/A321 | 1 | |
| IAE1M14077 | PLUG, PROTECTIVE | 3 | |
| IAE1M14083 | PLUG, PROTECTIVE | 3 | |
| IAE1N20008 | PLUG, COMMON NOZZLE | 10 | |
| IAE1N20028 | PLUG, NOZZLE | 1 | |
| IAE1R18063 | PLUG, LOCATION | 1 | |
| IAE1R18909 | PLUG, GUIDE | 1 | |
| IAE1R19770 | PLUG, BLANKING | 1 | |
| IAE2F10055 | PLUG, VACUUM CHECK | 1 | |
| IAE2P16246 | PLUG, PRESSURE TEST | 1 | |
| IAE2P16250 | PLUG, PRESSURE TEST | 1 | |
| J10001-1 | SET - PLUG, THERMAL ANTI-ICING EXHAUST VENT | 8 | |
| J10001-25 | SET - PLUG, THERMAL ANTI-ICING EXHAUST VENT | 8 | |
| J26005-2 | PLUG, PORTED | 1 | |
| J26007-1 | TEST BOX-CGO SMOKE HEAT TEST PLUG_TEST PLUG, HEATER_[J26007-1] | 7 | |
| J32054-21-ML | PLUG, LESS HEAT TREAT AND | 1 | |
| J38004-225 | Plug,outlet | 1 | |
| J78007-104 | EQUIPMENT - REM0VAL/INSTALLATI0N EQUIPMENT - EXHAUST SLEEVE AND PLUG, GENX-2B ENGINES | 5 | |
| J78007-74 | EQUIPMENT - REM0VAL/INSTALLATI0N EQUIPMENT - EXHAUST SLEEVE AND PLUG, GENX-2B ENGINES | 2 | |
| JGP12 | Ionic Plug, 12 mm, Red | 2 | |
| K10004-1 | Set - Plug, Thermal Anti-Icing Exhaust Vent | 2 | |
| K10004-24 | SET - PLUG, THERMAL ANTI-ICING EXHAUST VENT | 3 | |
| K10008-1 | Engine Exhaust Plug, GEnx | 1 | |
| K10009-1 | Engine Fan Air Plug, GEnx | 1 | |
| K10009-15 | PROTECTIVE PLUG, ENGINE FAN | 9 | |
| K28009-1 | PLUG, JUMPER FUEL VL | 2 | |
| K38002-1 | DISPATCH EQUIPMENT- PLUG, VACUUM WASTE TOILET BOWL | 11 | |
| KB737APUSOP | PLUG,APU EXH | 1 | |
| KBC-060-1A | PLUG,PROTECTIVE,DUST AND MOISTUR | 1 | |
| KC135-210 | PRE-COOLER EXHAUST PLUG, loc. above turbine exhaust outlet | 1 | |
| KC135-280 | APU EXHAUST PLUG, R-model | 1 | |
| L135M6501210 | TOOL, TEST PLUG, TAIL ROTOR, GEARBOX | 1 | |
| L17-101 | ENGINE INLET PLUG, shark mouth type | 1 | |
| LEV-101 | ENGINE INLET PLUG, -42 INLET (RDD Enterprise Mod) | 1 | |
| LEV-102 | ENGINE INLET PLUG, -135 INLET UPGRADE | 1 | |
| LIV-102 | ENGINE INLET PLUG, LX7 | 1 | |
| LIV-103 | ENGINE INLET PLUG, Wheeler Classic or PropJet (custom) (set of 4) | 1 | |
| LL-10 | PLUG, CONNECTOR | 1 | |
| LLSDC2HKS | PLUG, PROTECTIVE, DU | 1 | |
| LMC17M87 | PLUG, ENGINE EXHAUST | 5 | |
| LMC18M87 | PLUG, PW4000 ENGINE | 4 | |
| LTCT30613-01 | Oil Plug, IDG Shaft | 1 | |
| LTCT7519-01 | PLUG, MACHINE THREAD | 1 | |
| LW11775 | PLUG, PISTON RING | 1 | |
| M39012/05-0501 | CONNECTOR,PLUG,ELECTRICAL | 1 | |
| M5501/1-F3 | PLUG,PROTECTIVE,DUS | 1 | |
| M82100029 | PLUG, INLET | 1 | |
| M82723/59-214AR | PROTECTIVE COVER, PLUG, BAYONET | 1 | |
| M83413/4-1 | PLUG, GROUNDING STATIC GRID(COMMERCIALLY AVAILABLE) SAME AS M-3493-5 | 1 | |
| M83723-60-18AN | PLUG, SHUNT | 16 | |
| MBEU58361 | PLUG, BLANKING-HPRU | 1 | |
| MBEU70169 | PLUG, TRANSIT | 1 | |
| MBEU74461 | PLUG, BLANKING-DROGUE GUN | 1 | |
| MBEU74463 | PLUG, BLANKING-REMOTE ROCKET INITIATOR | 1 | |
| MBEU74465 | PLUG, BLANKING-BTRU | 1 | |
| MBEU74469 | PLUG, BLANKING-EJECTION GUN INITIATOR | 1 | |
| MC0700016 | EARTH BONDING PLUG, 2 STUD, 1 M5 POST, 1MOHM RESISTOR, EU PLUG | 1 | |
| MD80-816 | APU Shroud Cooling Air Inlet Plug, small circular inlet above PAC A/C Exhaust opening on aircraft right | 1 | |
| MD80-817 | APU Compartment Cooling Inlet Plug, small circular inlet | 1 | |
| MI17-105 | ENGINE INLET COVERS & Doghouse Inlet plug, for Inlet Baffle (set of 3) | 1 | |
| MIT69B62284 | BY-PASS JUMPER PLUG, RETRACTABLE POWER DRIVE UNIT (PDU) CARGO HANDLING | 8 | |
| MIT69B62284-E | JUMPER PLUG, BY-PASS | 1 | |
| MQ4-210 | EXHAUST PLUG, w/2 RBF Streamers, BAMS Model | 1 | |
| MQ8B-120 | INTERNAL ENGINE INLET (PLENUM) PLUG, NSN 4920-01-581-0263 "PLUG ENG AIR INLET" | 1 | |
| MS21913-10 | PLUG, FLARELESS | 15 | |
| MS21913-12 | Plug，flareless tube | 13 | |
| MS21913-14 | PLUG,FLARELESS TUBE | 1 | |
| MS21913-16 | Plug，flareless tube | 11 | |
| MS21913-2 | Plug，flareless tube | 6 | |
| MS21913-20 | Plug，flareless tube | 2 | |
| MS21913-24 | Plug，flareless tube | 3 | |
| MS21913-3 | Plug，flareless tube | 11 | |
| MS21913-32 | Plug，flareless tube | 1 | |
| MS21913-4 | Plug，flareless tube | 19 | |
| MS21913-5 | PLUG, FLARELESS | 15 | |
| MS21913-6 | PLUG, PROTECTIVE | 18 | |
| MS21913-8 | PLUG, FLARELESS | 21 | |
| MS21913D10 | PLUG, FLARELESS | 10 | |
| MS21913D12 | PLUG, FLARELESS | 9 | |
| MS21913D4 | PLUG, PROTECTIVE | 13 | |
| MS21913D6 | PLUG, FLARELESS TUBE | 19 | |
| MS21913D8 | PLUG, FLARELESS | 14 | |
| MS21913J4 | PLUG, FLARELESS | 2 | |
| MS21913J6 | PLUG, FLARELESS TUBE | 5 | |
| MS21913W4 | Plug，flareless tube | 1 | |
| MS21913W5 | Plug，flareless tube | 2 | |
| MS21914-5J | PLUG,TUBE FITTING,THREADED | 1 | |
| MS3476L24-61SN | CONNECTOR, STRAIGHT PLUG, 61 | 2 | |
| MS51840-27 | PLUG, SWITCH BOSS | 1 | |
| MS9902-12 | PLUG, VALVE OUTLET PORT | 1 | |
| MS9953-04 | PLUG,MACHINE THREAD | 1 | |
| MT7H79F-01GB | HEADSET,HI-VIZ,GC,US NATO PLUG,PELTOR | 5 | |
| N-2053-07-S-E | PLUG, O-RING HEX HEAD | 1 | |
| N-2053-07-S-E-1 | PLUG, O-RING HEX HEAD | 1 | |
| N-2206-03-S | PLUG, HEX HEAD | 2 | |
| N-2403-04-B | PLUG, MALE THREAD | 1 | |
| N2440-03A | COUPLING PLUG, | 2 | |
| NDT742G | GUIDE PLUG, NDT742A-D | 1 | |
| NSA938915-01 | CONNECTOR, PLUG, ELECTRICAL | 1 | |
| OMP2506-5 | PLUG, GPU DUST COVER | 7 | |
| P46P-108 | TURBINE INLET PLUG, JetProp Model | 1 | |
| PC24-121 | STARTER INLET PLUG, below main inlet (set of 2) | 1 | |
| PC7-120 | ENGINE AIR INTAKE PLUG, (similar to mfg p/n 9025-1463) | 1 | |
| PC7-130 | OIL COOLER INTAKE PLUG, (similar to mfg p/n 9014-2013) | 1 | |
| PC7-140 | AIR CONDITIONING INTAKE PLUG, (similar to mfg p/n OIC-1128-3) | 1 | |
| PC7-150 | HEATER INTAKE PLUG, (similar to mfg p/n H9015-6515) | 1 | |
| PD50 | PLUG,PLASTIC #5 | 4 | |
| PDE-4 | PLUG, PROTECTIVE AND DUST | 1 | |
| PDE-6 | PLUG, PROTECTIVE AND DUST | 1 | |
| PH04-5-08K | CONNECTOR: TERMINAL,PLUG,300V, | 2 | |
| PH2200A1 | HEAT GUN,PROHEAT VARITEMP EUROPEAN PLUG,130-815 DE | 1 | |
| PH2200A6 | HEAT GUN,PROHEAT VARITEMP UK PLUG, 130-815 DEGREE | 1 | |
| POL-6501-01 | PLUG, PROTECTION | 2 | |
| PRE65B97800 | CRADLE - PLUG, EXHAUST (JT9D POWERPLANT) | 1 | |
| PWA 102166 | PLUG, OIL FLOW TEST | 1 | |
| PWA 80968 | PLUG, VACUUM CHECK | 1 | |
| PWA 85243 | PLUG, SUPPORT | 1 | |
| PWA 88709 | PLUG, HOLDING | 1 | |
| PWA103684 | PLUG, VACUUM CHECK | 1 | |
| PWA1805-216 | GAGE,PLUG,PLAIN CYLINDRICAL | 1 | |
| PWA28966 | WRENCH-BORESCOPE PLUG,REMOVE INSTALL | 2 | |
| PWA45269 | Plug, Vacuum (Tester, Pressure) | 1 | |
| PWA45277 | Plug, Vacuum (Fixture) | 1 | |
| PWA45296 | PLUG, VACUUM CHECK | 1 | |
| PWA45470 | WRENCH - IGNITER PLUG, REMOVAL/INSTALLATION, JT8D | 6 | |
| PWA52766 | TEST PLUG,AIRCRAFT | 1 | |
| PWA53384 | TEST PLUG, AIRCRAFT | 1 | |
| PWA53386 | TEST PLUG, AIRCRAFT | 1 | |
| PWA57074 | TEST PLUG,AIRCRAFT | 1 | |
| PWA57102-6 | CAP-PLUG,PROTECTIVE | 1 | |
| PWA57719 | TEST PLUG, AIRCRAFT | 1 | |
| PWA71035 | PLUG,MASK | 1 | |
| PWA71037 | PLUG,MASK | 1 | |
| PWA80878 | PLUG,VACUUM CHECK | 1 | |
| PWA81352 | PLUG, VACUUM CHECK | 1 | |
| PWA85978 | PLUG,VACUUM CHECK-EXHAUST CASE OIL SCAVENGE | 1 | |
| PWA86580 | DRIVER - INNER PLUG, AP-5, AP-7 | 6 | |
| PWC30257 | PLUG, PRESSURE CHECK | 3 | |
| PWC30497 | PLUG, OIL PRESSURE | 2 | |
| PWC30530 | PLUG, ADAPTER | 9 | |
| PWC31261 | PLUG, FUEL NOZZLE INLET | 1 | |
| PWC31511 | PLUG, BLANKING | 1 | |
| PWC31573 | PLUG, NO.4 BEARING HSG. COVER OIL PASSAGE | 1 | |
| PWC32263 | PLUG, OIL BLANKING | 1 | |
| PWC38099 | Plug, Assembly | 5 | |
| PWC43192 | Plug, Blanking | 1 | |
| PWC43193 | Plug, Blanking | 1 | |
| PWC50529 | PLUG, ALIGNMENT | 1 | |
| PWC50574 | PLUG, PROPELLER SHAFT | 1 | |
| PWC52693 | PLUG, LEAKAGE CHECK, POST-SB7598 FUEL MANIFOLD INLET ADAPTER | 1 | |
| PWC52701 | PLUG, LEAKAGE CHECK, POST-SB7598 FUEL MANIFOLD INLET ADAPTER | 1 | |
| PWC69812 | BLANKING PLUG, BREATHER OUTLET | 6 | |
| PWC69836 | WAND, COMPRESSOR WASHER & BLANKING PLUG, BREATHER OUTLET | 7 | |
| RA70302 | EXHAUST NOZZLE PLUG, SPL-10700 | 4 | |
| RB T101503P | PLUG, BEARING INSTALLATION AND REMOVAL | 1 | |
| RB T103242-101 | Plug, Support | 1 | |
| RB23006303-3 | Plug, Outer | 2 | |
| RB6798048 | GAGE--PLUG, PRESSURE OIL PUMP BUSHIN | 2 | |
| RB6798049 | GAGE--PLUG, SCAVENGE OIL PUMP BUSHING | 2 | |
| RB6898261 | Plug, Alignment Check Frt. Support Bearing Housing Bore | 2 | |
| RBEL135M-6501-210 | Tool, Test Plug, Tail Rotor, Gearbox | 2 | |
| RPR49886 | PLUG, BORESCOPE | 1 | |
| RPR49887 | PLUG, BORESCOPE | 1 | |
| RQ4-100 | INTAKE COVER, includes generator inlet plug, NSN 1680-01-603-0981 (set of 2) | 1 | |
| RQ4-116 | SECURITY STRAP FOR INTAKE PLUG, attaches to ball-lock pins aft of intake lip. | 1 | |
| RRT040857 | SOCKET - REMOVAL - INSTALLATION OF IGNITOR PLUG, | 1 | |
| RSABG0003 | PLUG, EXHAUST | 6 | |
| RSE-1062-1A | Plug, Anti-Ice Overboard Opening Nose | 1 | |
| RSE1018 | PLUG, FAN THRUST REVERSER DUCT | 3 | |
| RSE1018 REV B | PLUG, FAN THRUST REVERSER DUCT | 1 | |
| RSE1019 | PLUG, ANTI-ICE OVERBOARD VENT | 4 | |
| RSE1019 REV A | PLUG, ANTI-ICE OVERBOARD VENT | 1 | |
| RSE1020 | PLUG, GEARBOX BREATHER VENT | 3 | |
| RSE1020 REV A | PLUG, GEARBOX BREATHER VENT | 1 | |
| RSE1034 | PLUG, ANTI-ICE OVERBOARD VALVE | 2 | |
| RSE1034 REV A | PLUG, ANTI-ICE OVERBOARD VALVE | 1 | |
| RSE1035 | PLUG, FAN COWL IDGS VENT | 3 | |
| RSE1035 REV NC | PLUG, FAN COWL IDGS VENT | 1 | |
| RSE1036 | PLUG, FAN COWL VENT | 2 | |
| RSE1036 REV A | PLUG, FAN COWL VENT | 1 | |
| RSE1042 | PLUG, PMC VENT INLET COWL | 2 | |
| RSE1042 REV NC | PLUG, PMC VENT INLET COWL | 1 | |
| RSE1062 | PLUG, ANTI-ICE OVERBOARD VENT | 4 | |
| RSE1062 REV NC | PLUG, ANTI-ICE OVERBOARD VENT | 1 | |
| RSE1132 | PLUG, NOZZLE (NOZZLE PLUG) | 10 | |
| RSE1229 | PLUG, COOLING | 1 | |
| RSE1229 REV NC | PLUG, COOLING | 1 | |
| RSE3414 | PLUG, CENTERBODY AND NOZZLE | 4 | |
| RSE7207 | PLUG, SAFETY, LOWER FAN COWL PRESSURE RELIEF DOOR | 3 | |
| RSE7207 REV A | PLUG, SAFETY, LOWER FAN COWL PRESSURE RELIEF DOOR | 1 | |
| RSE7305 | PLUG,THRUST REVERSER NOZZLE ; BR715 | 1 | |
| RSEI020 | PLUG, GEARBOX BREATHER VENT | 1 | |
| RSEI034 | PLUG, ANTI-ICE OVERBOARD VALVE | 1 | |
| RSEI035 | PLUG, FAN COWL IDGS VENT | 1 | |
| RSEI036 | PLUG, FAN COWL VENT | 1 | |
| RSEI042 | PLUG, PMC VENT INLET COWL | 1 | |
| RSEI062 | PLUG, ANTI-ICE OVERBOARD VENT | 1 | |
| RSEI0I8 | PLUG, FAN THRUST REVERSER DUCT | 1 | |
| RSEI0I9 | PLUG, ANTI-ICE OVERBOARD VENT | 1 | |
| S14-2 | 1/4" ALUMINUM DUST PLUG, S14-2 | 2 | |
| S6106KA | SOCKET, SPARK PLUG, | 2 | |
| SNX-100 | INLET PLUG, SubSonex jet engine nacelle | 1 | |
| SNX-105 | EXHAUST PLUG, SubSonex jet engine nacelle | 1 | |
| SOUND LEVEL METERB | AUDIO OSCILLATOR,200AB MULTIMETER, 2000A SOUND LEVEL METERB&K TYPE 2219 PHONE PLUG, PJ-051B CAPACITOR, 220 UF +/-20, 50 WVDC RESISTOR, 150-OHM +/-5, 3-WATT | 1 | |
| SOUND LEVEL METERB&K TYPE 2219 | AUDIO OSCILLATOR,200AB MULTIMETER, 2000A SOUND LEVEL METERB&K TYPE 2219 PHONE PLUG, PJ-051B CAPACITOR, 220 UF ±20%, 50 WVDC RESISTOR, 150-OHM ±5%, 3-WATT | 1 | |
| SS400P | PLUG, SEALING | 1 | |
| ST61189-06 | Plug, Calibrated | 1 | |
| ST869K-C-40F | PLUG, CLAMP, THREADED, FITTING END | 1 | |
| ST869K-C-40F-10 | PLUG, CLAMP, THREADED, FITTING END | 1 | |
| ST869K-C-56F | PLUG, CLAMP, THREADED, FITTING END | 1 | |
| ST869K-C-56F-12 | PLUG, CLAMP, THREADED, FITTING END | 1 | |
| ST869K-C-64F | PLUG, CLAMP, THREADED, FITTING END | 1 | |
| ST869K-C-64F-13 | PLUG, CLAMP, THREADED, FITTING END | 1 | |
| ST91021 | Plug, Production Aid | 2 | |
| STD1211 | PLUG, ENGINE | 1 | |
| STR-205 | EXHAUST PLUG, folding type | 1 | |
| T-262775 | PLUG, HYDROSTATIC TEST, FILL FITTING | 3 | |
| T-474489-1-4 | PLUG, HYDROSTATIC TEST, FILL FITTING | 1 | |
| T-474489-1-5 | "PLUG, HYDROSTATIC | 1 | |
| T-474530-1-4 | PLUG, HYDROSTATIC TEST, FILL FITTING | 1 | |
| T-474530-1-5 | PLUG, HYDROSTATIC TEST, TCPT FITTING | 1 | |
| T-475069-1-4 | PLUG, HYDROSTATIC TEST, FILL FITTING | 1 | |
| T-475069-1-5 | PLUG, HYDROSTATIC TEST, TCPT FITTING | 1 | |
| T-475070-1-4 | PLUG, HYDROSTATIC TEST, FILL FITTING | 1 | |
| T-475070-1-5 | PLUG, HYDROSTATIC TEST, TCPT FITTING | 1 | |
| T-475166-1-4 | PLUG, HYDROSTATIC TEST, FILL FITTING | 1 | |
| T-475166-1-5 | PLUG, HYDROSTATIC TEST, TCPT FITTING | 1 | |
| T-475976-1-4 | PLUG, HYDROSTATIC TEST, FILL FITTING | 1 | |
| T-475976-1-5 | PLUG, PRESSURE TEST, SWITCH FITTING | 1 | |
| T-5 | PLUG,PROTECTIVE,DUST AND MOISTUR | 2 | |
| T-71025 | Torque Adapter - Plug, blocking and thermal relief valve | 1 | |
| T-898869-10 | PLUG, HYDROSTATIC TEST, FILL FITTING | 1 | |
| T101503 | PLUG, BEARING INSTALLATION AND REMOVAL | 1 | |
| T103242-101 | PLUG, SUPPORT | 1 | |
| T2PP | PLUG, PIPE THREAD GAGE PORT T2PP | 1 | |
| T33-201 | EXHAUST PLUG, folding type | 1 | |
| T898869-10 | PLUG, HYDROSTATIC TEST, FILL FITTING | 1 | |
| T988638 | FUEL TEST PLUG, OIL BYPASS VALVE | 1 | |
| TE5T-52001-1 (IFREQ’D) | PLUG, FIREWALL | 1 | |
| TE65B17158 | TEST EQPT PLUG, VENT | 1 | |
| TM1033G002 | PLUG,PROTECTION | 1 | |
| TM1494G001 | PLUG,PROTECTIVE,DUST AND MOISTURE SEAL | 2 | |
| TP88 | PLUG,PROTECTIVE,THREADED,MALE | 2 | |
| TRA-115 | INTAKE PLUG WITH OIL COOLER SCOOP PLUG, connected w/ lanyard (402) (set of 2) | 1 | |
| TRA-116 | INTAKE PLUG with OIL COOLER SCOOP PLUG, connected w/ lanyard (set of 2) | 1 | |
| TSF36T-11001-6 | PLUG, APU BLEED AIR INLET | 1 | |
| TSF5T-52001-13 | PLUG, AFT DOORS SILL DRAIN | 1 | |
| TSF5T-52001-15 (IFREQ’D) | PLUG, AIRSTAIR HANDLE HOLE (IFREQ’D) | 1 | |
| TSF5T-52001-3 | PLUG, VACUUM WASTE OVERBOARD VENT | 1 | |
| TSF5T-52001-8 | PLUG, AFT GALLY VENT | 1 | |
| TSF5T-52001-9 | PLUG, FWD LAVATORY GALLEY EXHAUST VENT | 1 | |
| TSJ-1544241-12 | TEST PLUG, DUMMY | 1 | |
| U1781A | TEST LEAD SET CROCODILE CLIP, 4MM DOUBLE BANANA PLUG, SHROUDED, BLACK, RED | 1 | |
| UH60-109 | HH-60, ECS INTAKE PLUG, each | 1 | |
| UH60-175 | LOGGER WINDOW BUBBLE PLUG, need tracing | 1 | |
| VP6485 | KILLARK VP6485 PIN AND SLEEVE PLUG, 3 WIRE, 4 POLE, 60 AMP, 600V, COPPER-FREE ALUMINUM | 1 | |
| WCI-1700CN-06-0 | PLUG,PROTECTIVE,DUST AND MOISTUR | 2 | |
| WCI-CBG-10-2-N | GAGE, PLUG, PLAIN CYLINDRICAL | 2 | |
| WT-001619 | PLUG, HYDROSTATIC TEST, FILL FITTING | 1 | |
| WT-00360 | PLUG, HYDROSTATIC TEST PLUG, FILL FITTING | 1 | |
| WT-00444 | PLUG, HYDROSTATIC TEST, SWITCH FITTING | 1 | |
| WT-00695 | PLUG, HYDROSTATIC TEST, FILL FITTING | 1 | |
| WT-00773-1 | PLUG, HYDROSTATIC TEST, SWITCH FITTING | 1 | |
| WT-00773-2 | PLUG, HYDROSTATIC TEST, SWITCH FITTING | 1 | |
| WT-01620 | PLUG, HYDROSTATIC TEST, FILL FITTING | 1 | |
| WT-0444 | PLUG, HYDROSTTIC TEST, SWITCH FITTING | 1 | |
| WT-898869-10 | PLUG, HYDROSTATIC TEST, FILL FITTING | 1 | |
| WW-12 | CAPLUG, SHIPPING | 1 | |
| X9381932 | PLUG, TURBINE WHEEL | 1 | |
| ZC-M2-B/1-50K | Adaptor, Rohmann M2, Accepts MIZ-20/22 4-pin Cannon Plug, LF Bridge | 1 | |
| ZC-M2-R | Adaptor, Rohmann M2, Accepts MIZ-20/22 4-pin Cannon Plug, Reflection | 1 | |
| А38007-9 | PLUG, VACUUM WASTE SYSTEM | 1 | |
| 99D24003000001 | ELECTRICAL TEST PLUG,USED TO TEST THE VO | 6 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
