| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| GS20839-1 | PIN PRESS | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 0061R50003 | HINGE ASSEMBLY PIN PRESS FIXTURE | 1 | |
| 0U300993 | CRIMPING PRESS | 1 | |
| 10C1057P01 | PIN, ALIGNMENT – COMPRESSOR CASE | 1 | |
| 1213875-1 | AUTOPRESS CRIMPING TOOL K | 3 | |
| 1213875-2 | AUTOPRESS CRIMPING TOOL KIT | 1 | |
| 150979-0-200 | Pin Press Tool | 1 | |
| 150979-0-200 PM | PIN PRESS TOOL | 1 | |
| 151031-0-2002 | DOWEL PIN PRESS | 1 | |
| 151031-0-2002 PM | DOWEL PIN PRESS | 1 | |
| 151645-0-2000 | PIN PRESS SUPPORT | 1 | |
| 151645-0-2000 PM | PIN PRESS SUPPORT | 1 | |
| 151718-0-2000 | DOWEL PIN PRESS | 1 | |
| 151718-0-2000 PM | DOWEL PIN PRESS | 1 | |
| 151720-0-2009 | DOWEL PIN PRESS | 1 | |
| 151720-0-2009 PM | DOWEL PIN PRESS | 1 | |
| 3762 | GUIDE PIN - COMPRESSOR ROTOR FRONT BEARING CAP | 3 | |
| 717001 | PLATE, PRESSURE TEST CAPPING | 2 | |
| 833180 | FIXTURE PIN PRESS | 1 | |
| 1900810 | HIGH PRESSURE (LARGE) PINTLE BEARING REMOVAL | 1 | |
| 1900811 | LOW PRESSURE (SMALL) PINTLE BEARING REMOVAL | 1 | |
| 2002759 | Inflating valve adapter, without core depressing pin, 3000 max PSI, Inlet connection (F. 1/8 NPT) Outlet connection (F. threads 0.305-32) | 1 | |
| 2002760 | Strut Service Valve Adapter Inflating connection with core depressor pin, 3000 max PSI, Inlet connection (-4 M JIC), Outlet connection (F threads 0.305-32) | 1 | |
| 2002761 | Strut Service Valve Adapter Inflating connection with core depressor pin, 3000 max PSI, Inlet connection (-3 M JIC), Outlet connection (F threads 0.305-32) | 1 | |
| 2002763 | Strut Service Valve Adapter Inflating connection with core depressor pin, 3000 max PSI, Inlet connection (1/8 NPTF), Outlet connection (F threads 0.305-32) | 1 | |
| 5311461 | PIN SHOULDER LOW PRESSURE COMPRESSOR SHROUD INLET | 1 | |
| 6796169 | GUIDE PIN - COMPRESSOR REAR SEAL AND BEARING | 2 | |
| 6796360 | PULLER - COMPRESSOR BLADE RETAINING PIN | 1 | |
| 6797968 | COMPRESSOR - PINION FRONT BEARING OUTER RACE | 1 | |
| 6798051 | JIG--DRILL, PRESSURE OIL PUMP BODY BUSHING PIN | 1 | |
| 20022760 | STRUT SERVICE VALVE ADAPTER WITH CORE DEPRESSOR PIN | 1 | |
| 00162000200 | COMPRESSOR MODULE SHIPPING CONTAINER | 1 | |
| 2189038F1 | Pin Press Fixture | 1 | |
| 22241-0-2000 | DOWEL PIN PRESS | 1 | |
| 22241-0-2000 PM | DOWEL PIN PRESS | 1 | |
| 26142-AT1 | GEROTOR PIN PRESS FIXTURE | 1 | |
| 26142AT1 | GEROTOR PIN PRESS FIXTURE | 1 | |
| 294866-3 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860166-1 HIGH SPEED PINION GEAR FROM 3860158-1 BEARING) | 1 | |
| 2C14193G03 | STAND, SHIPPING/STORAGE HIGH PRESSURE TURBINE MODULE | 5 | |
| 2C14252 | TOOL, LAPPING-HIGH PRESSURE TURB. ROTOR SHAFT | 1 | |
| 2C14252 REV B | TOOL, LAPPING-HIGH PRESSURE TURB. ROTOR SHAFT | 1 | |
| 2C5952 | PUMPING UNIT, CLEANING - COMPRESSOR | 1 | |
| 2C6348P02 | PIN GUIDE FOR FAN ROTOR INSTALLATION SPECIAL TOOL FOR REPLACEMENT LOW PRESSURE COMPRESSOR (LPC) | 3 | |
| 2C6610G01 | PIN, GUIDE STAGE 2 HIGH PRESSURE TURBINE NOZZLE ASSEMBLY | 1 | |
| 2C81213G01 | SHIPPING COVER, COMPRESSOR INLET (COMPRESSOR INLET COVER) | 1 | |
| 30G1412 | PIN SHOULDER COMPRESSOR STATOR SYNCHRONIZING RING ARM | 1 | |
| 30G2664 | PIN SHOULDER COMPRESSOR STATOR SYNCHRONIZING RING ARM | 1 | |
| 369029985 | BUNGEE SPRING COMPRESSION TOOL ROD AND CHANNEL (PIN 369029985) | 1 | |
| 3791068-1 | FIXTURE PIN PRESS | 1 | |
| 38259-0-2002 | SPRING PIN PRESS | 1 | |
| 38259-0-2002 PM | SPRING PIN PRESS | 1 | |
| 513.71.12.001 | COMPRESSOR WASHER BLANKING RIGING PIN | 1 | |
| 523199-3 | HYDR.FOOT PUMP WITHOUT PRESSURE TUBE AND CRIMPING HEAD | 6 | |
| 56674S0002 | PRESSING PIN | 1 | |
| 571-523199-3 | HYDR.FOOT PUMP WITHOUT PRESSURE TUBE AND CRIMPING HEAD | 1 | |
| 620-864-769-0 | CRIMPING DIE FOR HARNESS COMPRESSION | 1 | |
| 620-864-912-0 | CRIMPING DIE FOR HARNESS COMPRESSION | 1 | |
| 781019-0 | HYDR.FOOT PUMP WITHOUT PRESSURE TUBE AND CRIMPING HEAD | 2 | |
| 833180-1 | Pin Press Fixture (2 ITEMS) | 1 | |
| 833311-1 | PIN PRESS FIXTURE | 1 | |
| 833978-4 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860166-1 HIGH SPEED PINION GEAR FROM 3860158-1 BEARING) | 1 | |
| 835364-2 | PIN PRESSING TOOLING | 1 | |
| 835844-1 | Pin Press Tool | 1 | |
| 856A1266 | PIN, ALINGMENT, HIGH PRESSURE COMPRESSOR CASE | 1 | |
| 856A1266G01 | PIN, ALINGMENT, HIGH PRESSURE COMPRESSOR CASE | 1 | |
| 856A1266G02 | PIN, ALINGMENT, HIGH PRESSURE COMPRESSOR CASE | 1 | |
| 856A1266G03 | Pins, Alignment - Compressor Cases (alignment pins) | 8 | |
| 856A1266G04 | PIN, ALIGNMENT - COMPRESSOR CASES | 7 | |
| 856A1266G05 | PIN, ALINGMENT, HIGH PRESSURE COMPRESSOR CASE | 1 | |
| 856A1266G06 | PINS, ALIGNMENT - COMPRESSOR CASES (ALIGNMENT PINS | 3 | |
| 856A1266G07 | PIN, ALIGNMENT - COMPRESSOR CA | 1 | |
| 856A1266P07 | PINS, ALIGNMENT - COMPRESSOR CASES (ALIGNMENT PINS) | 1 | |
| 856A1284 G01 | PULLER, PIN - HIGH PRESSURE TURBINE NOZZLE | 4 | |
| 856A2722G01 | TURBINE FRAME TO LOW PRESSURE TURBINE CASE GUIDE PINS | 6 | |
| 8816540000 | OIL PRESSURE TAPPING TUBE | 1 | |
| 8817027000 | TUBE, OIL PRESSURE TAPPING | 1 | |
| 956A1264 | TOOL SET - REMOVE-COMPRESSOR STATOR SHROUD PINS | 1 | |
| 956A8864G01 | PIN - GUIDE, LOW PRESSURE COMPRESSOR VANE | 2 | |
| A29002 | LOCKING PIN VALVE HYD RES. PRESSURIZATION | 2 | |
| A29002-1 | LOCK PIN-HYD RESERVOIR PRESS'N VALVE | 1 | |
| A29002-6 | LOCKING PIN - VALVE, HYDRAULIC RESERVOIR PRESSURIZATION SHUTOFF | 16 | |
| A29002-6 | LOCKING PIN – HYDRAULIC RESERVOIR PRESSURIZATION SHUTOFF VALVE | 16 | |
| AGSE-C049-G02 | LOW PRESSURE TURBINE (LPT) MAJOR MODULE 3 SHIPPING CONTAINER -CFM56-5B, CFM56-5C & CFM56-7B ENGINES | 1 | |
| AT5426 | PIN PRESSING FIXTURE, | 1 | |
| BL48564 | SUPPORT PRESS PIN | 1 | |
| BL48565 | PUNCH PRESS PIN | 1 | |
| C27036-6 | L/E CRUISE DE-PRESS VALVE PIN | 1 | |
| C27038 | LOCKPIN L.E. CRUISE DPRESSURIZATION VALVE | 1 | |
| C27038-1 | L.E. CRUISE DEPRESS PIN | 7 | |
| C27038-6 | Lockout Pin - Leading Edge Cruise Depressurization Valve | 22 | |
| C27038-6 | LOCKPIN CRUISE DEPRESSURIZATION VALVE | 22 | |
| C27038-7 | LOCK PIN- LE DIPRESSURIZATION | 6 | |
| C27038‐6 | PIN ‐ LOCKOUT L.E. CRUISE DEPRESSURIZATION VALVE (SPL-1746) | 22 | |
| C71020-22 | AFT BOOTSTRAP PRESS PIN | 1 | |
| G-1307-01 | SHEAR PIN COMPRESSION TENSION | 3 | |
| G1453-22 | PIN-TOWBAR SHEAR (RADIAL AND TENSION/COMPRESSION) | 3 | |
| GS20406-1 | BLADE PIN PRESS | 2 | |
| GS20839-1 | PIN PRESS, CONTROL GOVERNOR | 1 | |
| GT9910014-GT0001-0050 | CARGO DOOR SRPING COMPRESSION TOOL ASSEMBLY | 1 | |
| HPM-20 | HYDRAULIC PRESS: FOR FORMING AND SHAPING METAL UNDER PRESSURE. | 1 | |
| HU29649 | PIN - GUIDE LP COMPRESSOR SHAFT | 1 | |
| HU80955 | IMMOBILISER - DOG LP COMPRESSOR WHILST BOROSCOPING,AND CHANGING FAN BLADES | 8 | |
| IAE1R18892 | PIN, RIGGING - HP COMPRESSOR, LOCATE IGV'S | 11 | |
| IAE1R18893 | RIGGING PIN HP COMPRESSOR | 11 | |
| IAE1R18894 | PIN, RIGGING - HP COMPRESSOR, LOCATE STAGE 4 VSVS | 13 | |
| IAE1R18895 | PIN, RIGGING - HP COMPRESSOR, LOCATE STAGE 5 VSVS | 11 | |
| JMP-CFM56-D-4777 | PUMPING UNIT, COMPRESSOR CLEANING WITH HOSE JMP-CF34-D-6000 | 1 | |
| JMP/CFM56/D/4777/C200 | PUMPING UNIT - CLEANING, COMPRESSOR | 3 | |
| LTCT13803 | Damping Ring, Compressor Rotor Assembly | 1 | |
| LTCT14647 | PIN PULLER(COMPRESSOR ROTOR) | 1 | |
| LTCT2048 | COMPRESSOR PINION GEAR HOLDING FIXTURE | 1 | |
| M21818 | Lower Pin Compress Tool | 9 | |
| OTC7248 | HD ANCHOR PIN PRESS | 1 | |
| P60373 | COVER, SHIPPING (OIL TANK PRESSURE TUBE) | 1 | |
| P60382 | COVER-SHIPPING (OIL TANK PRESSURE TUBE) | 1 | |
| PWA25637 | PINS RIGGING - REAR COMPRESSOR VARIABLE STATORS | 5 | |
| PWA26176 | PINS CHECKING REAR COMPRESSOR VARIABLE STATORS | 1 | |
| PWA85688 | Puller, Jackscrew - Engine Assy, Compressor Stator Bearing Pin | 9 | |
| PWC32457 | FITTING PS1 TAPPING ( TEST CELL STATIC PRESSURE, PROPELLER | 4 | |
| RB6798051 | Pressure Oil Pump Body Bushing Pin Jig | 2 | |
| RBT18655 | Input Pinion Bearing Pressing Cylinder Work Aid (206 A/B) | 1 | |
| RBT200203 | Input Pinion Bearing Press Cyl. | 1 | |
| RMF27003-C-012,000H7X012,0-P6-F | BUSHING,GUIDE PIN, PRESS FIT TYPE | 1 | |
| S1 | Press for Crimping Hoses | 4 | |
| SG 8816540000 | ARRIEL OIL PRESSURE TAPPING TUBE MODULE | 1 | |
| ST2575C | STANDARD TOOL - FENWAL CONNECTORS, SLEEVE AND PIN PRESS TOOL, BAC5162-64 | 2 | |
| ST2575C-1 | Sleeve & pin press tool BAC5162-64 | 3 | |
| ST7484 | SPINDLE GEAR PRESS TOOL (2 IT) | 1 | |
| T69588 | PIN PRESSING FIXTURE, P | 1 | |
| TA04999 | Arbor Press and Crimping | 1 | |
| TAP1 | TRUCK ANCHOR PIN PRESS | 1 | |
| TAP1-4A | PRESSURE PAD PIN | 1 | |
| TIG10501 | BRAKE CLEVIS PIN PRESS | 1 | |
| TM2390G001 | PRESSURE TAPPING ADAPTOR | 2 | |
| C27038-6 | PIN - LOCKOUT, L.E. CRUISE DEPRESSURIZATION VALVE | 22 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
