| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| F27702000 | PEENING | 2 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) FPK-PRO-104 | FLAP PEENING TOOL KIT (CALIBRATION) | 1 | |
| (CALIB) FPK-PRO-105 | ROTARY FLAPPER PEENING FLAPSPEED (CALIBRATION) | 1 | |
| 365A93-3215-00 | DRIFT PEENING TAB WASHER | 1 | |
| 5120-99-617-1803 | PEENING TOOL | 1 | |
| 660-700 | KIT, FLAP PEENING | 1 | |
| 660-990 | ECONOMICAL MOTOR KIT FOR FLAP PEENING | 1 | |
| 6851328 | MASK - GLASS BEAD PEENING | 1 | |
| 6851329 | MASK - GLASS BEAD PEENING 1ST STAGE | 1 | |
| 6872948 | FIXTURE----HOLDING, SERIES II 3RD STAGE NOZZLE SHOT PEENING | 1 | |
| 6872949 | MASK----SHOT PEENING, SERIES II 3RD STAGE NOZZLE | 1 | |
| 6872950 | MASK - SHOT PEENING | 1 | |
| 6872951 | TURNTABLE - SHOT PEENING | 1 | |
| 23038050 | MASK--GLASS BEAD PEEN, COMPRESSOR FIRST-STAGE WHEEL MASKS THE FRONT AND REAR OF THE COMPRESSOR FIRST- STAGE WHEEL WHILE PEENING THE BLADES. | 1 | |
| 83760116 | PEENING TOOL | 1 | |
| 856A3074 G01 | Peening Tool | 9 | |
| 856A3074G01 | PEENING TOOL | 9 | |
| 98A53803009000 | BOOTH SHOT PEENING | 1 | |
| 999249 | ROTARY FLAP PEENING WHEEL - 1IN | 2 | |
| 999250 | ROTARY FLAP PEENING WHEEL - 1.25IN | 5 | |
| 999500 | ROTARY FLAP KIT (PEENING) | 2 | |
| 999500.TSP | FLAP-PEENING KIT | 1 | |
| 999510 | FLAP PEENING | 1 | |
| 999515 | FLAP PEENING | 1 | |
| A690756 | PEENING TOOL | 1 | |
| A693756 | PEENING TOOL | 1 | |
| A693757 | PEENING TOOL | 1 | |
| A693757 PM | PEENING TOOL | 1 | |
| A693758 | PEENING TOOL | 1 | |
| A693759 | PEENING TOOL | 1 | |
| A693760 | PEENING TOOL | 1 | |
| A693761 | PEENING TOOL | 1 | |
| A693856 | PEENING TOOL | 1 | |
| AC2 TRE PR1 | MAQUINA SHOT PEENING | 1 | |
| ATI107A-2D | PEENING TOOL ALUMINUM 1 X 3-1/8 - SHANK 401 | 1 | |
| ATI107A2DB | PEENING TOOL BRASS 1 X 3-1/8 - SHANK 401 | 1 | |
| ATI107A2DN | PEENING TOOL NYLON 1 X 3-1/8 - SHANK 401 | 1 | |
| ATI107B-2D | PEENING TOOL ALUMINUM 1 X 3-1/8 - SHANK 498 | 1 | |
| ATS107-B | BRASS HEAD ATS107A SERIES PEENING TOOL | 1 | |
| ATS107A-7B | BRASS PEENING TOOL (7') | 1 | |
| Almen Gage TSP-3 (FPG-1000) | SHOT PEENING CONTROL (ALMEN GAGE) | 1 | |
| Boeing | Flap Peening Kit | 1 | |
| CH700-220 | PEENING BASE | 1 | |
| CHA138710 | PEENING-TOOL | 1 | |
| CHA1542-0196 | Peening Tool | 1 | |
| CHA1542-0196PM | PEENING TOOL | 1 | |
| CHA700-220 | PEENING BASE | 1 | |
| CHA705-700 | PEENING TOOL | 1 | |
| CHA722-271 | PEENING TOOL FIXTURE | 1 | |
| E2J51097 | PEENING TOOL | 1 | |
| F27294000 | PEENING TOOL | 2 | |
| FLAP PEENING WHEEL 3M | FLAP PEENING WHEEL 3M | 1 | |
| FLAP-100 | FLAP PEENING | 1 | |
| FLAP-125 | FLAP PEENING WHEELS 9/16 X 1-1/4 | 1 | |
| FLAPPEENINGKIT | FLAP PEENING KIT TOOL | 1 | |
| FPK-PRO-103 | ROTARY FLAPPER PEENING | 1 | |
| FPK-PRO-103-00 | ROTARY FLAPPER PEENING | 1 | |
| FPK-PRO-104 | PEENING, FLAPPER PEENING KIT MFG: SHOCK FORM MODEL | 2 | |
| FPK-PRO-105 | ROTARY FLAPPER PEENING FLAPSPEED | 2 | |
| FPM-100-3 | FLAP PEENING MANDRIL | 1 | |
| FPM-125-3 | FLAP PEENING MANDRIL | 1 | |
| GS47102 | TOOL, PEENING | 1 | |
| HSP-1297 | HAMMER - PEENING | 2 | |
| HSP1297 | HAMMER, PEENING | 2 | |
| HSP3293 | PEENING TOOL | 1 | |
| HU1192 | TOOL - PEENING, NO.10 UNF SHANK NUT REPLACEMENT (FRS3034) | 1 | |
| HU17402 | PEENING TOOL | 1 | |
| HU19547 | TOOL - PEENING, 0.500" UNF SHANK NUT REPLACEMENT (FRS3034) | 1 | |
| HU19641 | PEENING TOOL | 2 | |
| HU19648 | PEENING TOOL | 2 | |
| HU19655 | Peening tool 0.3125Inch | 4 | |
| HU19655-1 | Peening tool 0.3125Inch | 1 | |
| HU19657 | PEENING TOOL | 2 | |
| HU2304 | TOOL - PEENING, 0.250" UNF SHANK NUT REPLACEMENT (FRS3034) | 1 | |
| HU24160 | Peening Tool | 1 | |
| HU2843 | TOOL - PEENING, 0.312" UNF SHANK NUT REPLACEMENT (FRS3034) | 1 | |
| HU28820/1 | Peening tool | 1 | |
| HU31290 | PUNCH-PEENING, 7 & 12TH STAGE | 1 | |
| HU34187 | PEENING FIXTURE 1 | 1 | |
| HU653 | TOOL - PEENING, 0.250" UNF SHANK NUT REPLACEMENT (FRS3034) | 1 | |
| HU655 | TOOL - PEENING, 0.250" UNF SHANK NUT REPLACEMENT (FRS3034) | 1 | |
| IAE1P16567 | V2500 LP PEENING TOOL | 3 | |
| IAE1R19664 | TAIL CONE PEENING TOOL | 1 | |
| IAE3J12712 | V2500 LP PEENING TOOL | 2 | |
| IAE3J12713 | PEENING FIXTURE | 2 | |
| IAE3J13232 | HAND PRESS PEENING FIX | 1 | |
| IAE3J13235 | FIXTURE PEENING | 1 | |
| LM0047 | ROTOR PEENING KIT. | 1 | |
| LTCT6210 | Punch, Baffle Peening | 1 | |
| LTCT6214 | Fixture, Baffle Peening | 1 | |
| LX53000033 | NUT PEENING REMOVAL TOOL | 1 | |
| MITBAC5730-2 | FLAPPEENING/DIGITALALMENG | 1 | |
| NIL | PORTABLE SHOT PEENING MACHINE | 1 | |
| PEENINGDTI | FLAP PEENING KIT DTI TOOL | 1 | |
| PEENINGKIT | FLAP PEENING KIT | 1 | |
| PEENINGKIT (999250) | FLAP PEENING KIT (5130-01-053-5165 or 5130010535165) TC330 | 1 | |
| PRO104 | ROTARY FLAPPER PEENING FLAPSPEED | 1 | |
| PRO105 | ROTARY FLAPPER PEENING FLAPSPEED | 1 | |
| PWA70473 | AUTOMATED SHOT PEENING MASK | 1 | |
| PWA70477 | AUTOMATED SHOT PEENING PLATE, ADAPTER | 1 | |
| PWA70479 | AUTOMATED SHOT PEENING FIXTURE, TEST | 1 | |
| Q21822 | Peening Tool | 1 | |
| Q21822 PM | PEENING TOOL | 1 | |
| Q21822PM | PEENING TOOL | 1 | |
| RRT027926 | PEENING TOOL | 1 | |
| RRT030165 | PEENING TOOL | 1 | |
| RRT102901 | PEENING TOOL | 1 | |
| RRT105889 | Peening Tool - this replaced by RRT112569 | 1 | |
| RRT108518 | PEENING TOOL | 1 | |
| RRT112569 | Peening Tool- ( Old number was RRT105889) | 1 | |
| STD-987 | TOOL - VIBRATION PEENING | 1 | |
| T-338108 | Unpeening Tool | 1 | |
| T-338109 | Unpeening Punch | 1 | |
| T-552435 | Peening Punch | 1 | |
| TC330 | FLAP PEENING (AIRBUS) | 1 | |
| TSP-3B | ROTARY FLAP PEENING KIT | 1 | |
| TSP3B | SHOT PEENING CONTROL (ALMEN GAGE) | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
