| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| P2KABF-02 | P MAT | 6 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 3792548-1 | MOBILE PNEUMATIC VACUUM CHAMBER | 1 | |
| (CALIB) 09/04/1945 | PNEUMATIC TEST KIT (CALIBRATION) | 1 | |
| (CALIB) 250080B | PNEUMATIC SEALANT GUN (CALIBRATION) | 1 | |
| (CALIB) 6300 | Automated Pitot Static Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 6300L | Automated Pitot Static Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 6450-10 | Automated Pitot Static Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 6600 | Automated Pitot Static Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 6600-NG | Automated Pitot Static Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 80000-05 | PMAT 2000 (CALIBRATION) | 1 | |
| (CALIB) 80080-1 | PMAT XS (CALIBRATION) | 1 | |
| (CALIB) 98D34103003000 | PITOT PNEUMAT CLEANER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98S21003000200 | ELECTROPNEUMATIC OUT FLOW VALVE | 1 | |
| (CALIB) 98S45105000000 | PMAT 2000 ADAPTER CABLE | 1 | |
| (CALIB) DLT02MAPP1000 | PNEUMATIC PUMP | 2 | |
| (CALIB) DR350P3000 | BERBEQUIM T/PISTOLA PNEUMATICO (CALIBRATION) | 1 | |
| (CALIB) G36035-1 | Test Equipment - Pneumatic System Health check (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) G600-210004-227 | KIT, PNEUMATIC PRESSURE TEST 220V/50HZ (CALIBRATION) | 1 | |
| (CALIB) G601-210007-201 | KIT, PNEUMATIC PRESSURE TEST 220-240V/50 (CALIBRATION) | 1 | |
| (CALIB) KCA-1602 | COMPASS PRISMATIC (CALIBRATION) | 1 | |
| (CALIB) P2K-ABF-02 | PMAT DATA LOADER, PMAT2000 KIT (CALIBRATION) | 1 | |
| (CALIB) P2KLDS08 | Kit PMAT 2000 | 1 | |
| (CALIB) PA133 | PNEUMATIC PUMP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PMAT-XS | PMAT XS (CALIBRATION) | 1 | |
| (CALIB) RB46-01 | HYDROPNEUMATIC RECEIVER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SWE8202A | MULTIPLIER, PNEUMATIC (CALIBRATION) | 1 | |
| (CALIB) T181G4001.221 | PROGRAMMATION CARTE PCMCIA TIGRE 3.0 | 1 | |
| (CALIB) UNIV-20-40-BA | Manual and Automatic Static Testing Equipment for Aircraft Applications (CALIBRATION) (CALIBRATION) | 1 | |
| * KPE19212417 * | PNEUMATIC WORKSHOP INSTALLATIONS | 1 | |
| . | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 PAGES 6-9. MATERIAL: 2024-T3 ALCLAD ALUMINUM. SINGLE DOUBLER CONFIGURATION. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE...SKIN THICKNESS = .080"..DOUBLER = .098"..FILLER = .080"..STRINGER = .063" | 1 | |
| 00-3600-0-0006 | PNEUMATIC TESTER | 1 | |
| 001671-CE | New WC270G-Insert Potable Water unit (CE and/or 50Hz input). Includes hose & couplers required to service aircraft. 270-gallons capacity stainless steel tank in insulated aluminum enclosure, Honda GX160 electric start gas engine mated to Teel centrifugal | 1 | |
| 001901-001-00 | KEY FOR MATING PIN SPLIT NUT | 8 | |
| 01790150 (GM 80CR) | VACUUM - ULPA, HAZARDOUS MATERIAL | 1 | |
| 02-10101 | IRWIN Unibit® Self-Starting Step Drills (Type: H.S.S. - Fractional) (# of holes: 13) (Hole size range: 1/8" to 1/2") (Shank size: 1/4") (Maximum material thickness: 1/8") (Add to cart: Add To Cart) | 1 | |
| 02-10101T | IRWIN Unibit® Self-Starting Step Drills (Type: H.S.S. - Fractional) (# of holes: 13) (Hole size range: 1/8" to 1/2") (Shank size: 1/4") (Maximum material thickness: 1/8") (Add to cart: Add To Cart) (Type: TiN - Fractional) (# of holes: 13) (Hole size rang | 1 | |
| 02-10102 | IRWIN Unibit® Self-Starting Step Drills (Type: H.S.S. - Fractional) (# of holes: 13) (Hole size range: 1/8" to 1/2") (Shank size: 1/4") (Maximum material thickness: 1/8") (Add to cart: Add To Cart) (Type: TiN - Fractional) (# of holes: 13) (Hole size rang | 1 | |
| 02-10102T | IRWIN Unibit® Self-Starting Step Drills (Type: H.S.S. - Fractional) (# of holes: 13) (Hole size range: 1/8" to 1/2") (Shank size: 1/4") (Maximum material thickness: 1/8") (Add to cart: Add To Cart) (Type: TiN - Fractional) (# of holes: 13) (Hole size rang | 1 | |
| 02-10103 | IRWIN Unibit® Self-Starting Step Drills (Type: H.S.S. - Fractional) (# of holes: 13) (Hole size range: 1/8" to 1/2") (Shank size: 1/4") (Maximum material thickness: 1/8") (Add to cart: Add To Cart) (Type: TiN - Fractional) (# of holes: 13) (Hole size rang | 1 | |
| 02-10103T | IRWIN Unibit® Self-Starting Step Drills (Type: H.S.S. - Fractional) (# of holes: 13) (Hole size range: 1/8" to 1/2") (Shank size: 1/4") (Maximum material thickness: 1/8") (Add to cart: Add To Cart) (Type: TiN - Fractional) (# of holes: 13) (Hole size rang | 1 | |
| 02-10104 | IRWIN Unibit® Self-Starting Step Drills (Type: H.S.S. - Fractional) (# of holes: 13) (Hole size range: 1/8" to 1/2") (Shank size: 1/4") (Maximum material thickness: 1/8") (Add to cart: Add To Cart) (Type: TiN - Fractional) (# of holes: 13) (Hole size rang | 1 | |
| 02-10104T | IRWIN Unibit® Self-Starting Step Drills (Type: H.S.S. - Fractional) (# of holes: 13) (Hole size range: 1/8" to 1/2") (Shank size: 1/4") (Maximum material thickness: 1/8") (Add to cart: Add To Cart) (Type: TiN - Fractional) (# of holes: 13) (Hole size rang | 1 | |
| 02-10105 | IRWIN Unibit® Self-Starting Step Drills (Type: H.S.S. - Fractional) (# of holes: 13) (Hole size range: 1/8" to 1/2") (Shank size: 1/4") (Maximum material thickness: 1/8") (Add to cart: Add To Cart) (Type: TiN - Fractional) (# of holes: 13) (Hole size rang | 1 | |
| 02-11075 | Blair® Hole Cutter Kits (Description: Heavy-Duty Hole Cutter Kit) (Material capacity: 1/4") (Add to cart: Add To Cart) | 1 | |
| 02-11091 | Blair® Hole Cutter Kits (Description: Heavy-Duty Hole Cutter Kit) (Material capacity: 1/4") (Add to cart: Add To Cart) (Description: Rotabroach Large Diameter Hole Cutter Kit) (Material capacity: 1/2") (Add to cart: Add To Cart) | 1 | |
| 02-11101 | IRWIN Unibit® Self-Starting Step Drills (Type: H.S.S. - Fractional) (# of holes: 13) (Hole size range: 1/8" to 1/2") (Shank size: 1/4") (Maximum material thickness: 1/8") (Add to cart: Add To Cart) (Type: TiN - Fractional) (# of holes: 13) (Hole size rang | 1 | |
| 02-11101T | IRWIN Unibit® Self-Starting Step Drills (Type: H.S.S. - Fractional) (# of holes: 13) (Hole size range: 1/8" to 1/2") (Shank size: 1/4") (Maximum material thickness: 1/8") (Add to cart: Add To Cart) (Type: TiN - Fractional) (# of holes: 13) (Hole size rang | 1 | |
| 02-11102 | IRWIN Unibit® Self-Starting Step Drills (Type: H.S.S. - Fractional) (# of holes: 13) (Hole size range: 1/8" to 1/2") (Shank size: 1/4") (Maximum material thickness: 1/8") (Add to cart: Add To Cart) (Type: TiN - Fractional) (# of holes: 13) (Hole size rang | 1 | |
| 02-11103 | IRWIN Unibit® Self-Starting Step Drills (Type: H.S.S. - Fractional) (# of holes: 13) (Hole size range: 1/8" to 1/2") (Shank size: 1/4") (Maximum material thickness: 1/8") (Add to cart: Add To Cart) (Type: TiN - Fractional) (# of holes: 13) (Hole size rang | 1 | |
| 02-11103T | IRWIN Unibit® Self-Starting Step Drills (Type: H.S.S. - Fractional) (# of holes: 13) (Hole size range: 1/8" to 1/2") (Shank size: 1/4") (Maximum material thickness: 1/8") (Add to cart: Add To Cart) (Type: TiN - Fractional) (# of holes: 13) (Hole size rang | 1 | |
| 02-11104 | IRWIN Unibit® Self-Starting Step Drills (Type: H.S.S. - Fractional) (# of holes: 13) (Hole size range: 1/8" to 1/2") (Shank size: 1/4") (Maximum material thickness: 1/8") (Add to cart: Add To Cart) (Type: TiN - Fractional) (# of holes: 13) (Hole size rang | 1 | |
| 02-11104T | IRWIN Unibit® Self-Starting Step Drills (Type: H.S.S. - Fractional) (# of holes: 13) (Hole size range: 1/8" to 1/2") (Shank size: 1/4") (Maximum material thickness: 1/8") (Add to cart: Add To Cart) (Type: TiN - Fractional) (# of holes: 13) (Hole size rang | 1 | |
| 02-11105 | IRWIN Unibit® Self-Starting Step Drills (Type: H.S.S. - Fractional) (# of holes: 13) (Hole size range: 1/8" to 1/2") (Shank size: 1/4") (Maximum material thickness: 1/8") (Add to cart: Add To Cart) (Type: TiN - Fractional) (# of holes: 13) (Hole size rang | 1 | |
| 02-11105T | IRWIN Unibit® Self-Starting Step Drills (Type: H.S.S. - Fractional) (# of holes: 13) (Hole size range: 1/8" to 1/2") (Shank size: 1/4") (Maximum material thickness: 1/8") (Add to cart: Add To Cart) (Type: TiN - Fractional) (# of holes: 13) (Hole size rang | 1 | |
| 02-13218 | Blair® Hole Cutter Kits (Description: Heavy-Duty Hole Cutter Kit) (Material capacity: 1/4") (Add to cart: Add To Cart) (Description: Rotabroach Large Diameter Hole Cutter Kit) (Material capacity: 1/2") (Add to cart: Add To Cart) (Description: Blaircutter | 2 | |
| 02-14006 | Blair® Hole Cutter Kits (Description: Heavy-Duty Hole Cutter Kit) (Material capacity: 1/4") (Add to cart: Add To Cart) (Description: Rotabroach Large Diameter Hole Cutter Kit) (Material capacity: 1/2") (Add to cart: Add To Cart) (Description: Blaircutter | 1 | |
| 02-208-F | Inner-Outer Reamers (Material: Aluminum & Soft Materials) (Capacity: 3/16" to 1-1/2" O.D.) (Add to cart: Add To Cart) | 1 | |
| 02-208-FSS | Inner-Outer Reamers (Material: Aluminum & Soft Materials) (Capacity: 3/16" to 1-1/2" O.D.) (Add to cart: Add To Cart) (Material: Stainless Steel, Copper, Brass) (Capacity: 3/16" to 1-1/2" O.D.) (Add to cart: Add To Cart) | 1 | |
| 02-5050 | TOOL;TYPE: CUTTING;WIDTH: 12MM;MATERIAL: TUNGSTEN;MAN PART NUMBER: 02-5050;MANUFACTURER: ROEBUCK | 1 | |
| 02-5051 | TOOL;TYPE: CUTTING;WIDTH: 16MM;MATERIAL: TUNGSTEN;MAN PART NUMBER: 02-5051;MANUFACTURER: ROEBUCK | 1 | |
| 02-5061 | TOOL;TYPE: CUTTING;WIDTH: 12MM;MATERIAL: TUNGSTEN;MAN PART NUMBER: 02-5062;MANUFACTURER: ROEBUCK | 1 | |
| 02-5062 | TOOL;TYPE: CUTTING;WIDTH: 12MM;MATERIAL: TUNGSTEN;MAN PART NUMBER: 02-5050;MANUFACTURER: ROEBUCK | 1 | |
| 02-5063 | TOOL;TYPE: CUTTING;WIDTH: 16MM;MATERIAL: TUNGSTEN;MAN PART NUMBER: 02-5063;MANUFACTURER: ROEBUCK | 1 | |
| 02-7810-0110-01 | OPTION: PNEUMATIC AIR PUMP, | 1 | |
| 02-C1-H | Jobber's Length Drill Sets (Drill sizes: #1 to #60) (Number of pieces: 60) (Type: Heavy Duty) (Material: High Speed Steel) (Drill point: 135 Deg. Split Point) (Add to cart: Add To Cart) | 1 | |
| 02-C112-H | Jobber's Length Drill Sets (Drill sizes: #1 to #60) (Number of pieces: 60) (Type: Heavy Duty) (Material: High Speed Steel) (Drill point: 135 Deg. Split Point) (Add to cart: Add To Cart) (Drill sizes: 1-6 mm (x 0.5 mm)) (Number of pieces: 11) (Type: Produc | 1 | |
| 02-C115-H | Jobber's Length Drill Sets (Drill sizes: #1 to #60) (Number of pieces: 60) (Type: Heavy Duty) (Material: High Speed Steel) (Drill point: 135 Deg. Split Point) (Add to cart: Add To Cart) (Drill sizes: 1-6 mm (x 0.5 mm)) (Number of pieces: 11) (Type: Produc | 1 | |
| 02-C13-H | Jobber's Length Drill Sets (Drill sizes: #1 to #60) (Number of pieces: 60) (Type: Heavy Duty) (Material: High Speed Steel) (Drill point: 135 Deg. Split Point) (Add to cart: Add To Cart) (Drill sizes: 1-6 mm (x 0.5 mm)) (Number of pieces: 11) (Type: Produc | 1 | |
| 02-C15-H | Jobber's Length Drill Sets (Drill sizes: #1 to #60) (Number of pieces: 60) (Type: Heavy Duty) (Material: High Speed Steel) (Drill point: 135 Deg. Split Point) (Add to cart: Add To Cart) (Drill sizes: 1-6 mm (x 0.5 mm)) (Number of pieces: 11) (Type: Produc | 1 | |
| 02-C21-H | Jobber's Length Drill Sets (Drill sizes: #1 to #60) (Number of pieces: 60) (Type: Heavy Duty) (Material: High Speed Steel) (Drill point: 135 Deg. Split Point) (Add to cart: Add To Cart) (Drill sizes: 1-6 mm (x 0.5 mm)) (Number of pieces: 11) (Type: Produc | 1 | |
| 02-C252-H | Jobber's Length Drill Sets (Drill sizes: #1 to #60) (Number of pieces: 60) (Type: Heavy Duty) (Material: High Speed Steel) (Drill point: 135 Deg. Split Point) (Add to cart: Add To Cart) (Drill sizes: 1-6 mm (x 0.5 mm)) (Number of pieces: 11) (Type: Produc | 1 | |
| 02-C29-H | Jobber's Length Drill Sets (Drill sizes: #1 to #60) (Number of pieces: 60) (Type: Heavy Duty) (Material: High Speed Steel) (Drill point: 135 Deg. Split Point) (Add to cart: Add To Cart) (Drill sizes: 1-6 mm (x 0.5 mm)) (Number of pieces: 11) (Type: Produc | 1 | |
| 02-CAZ-H | Jobber's Length Drill Sets (Drill sizes: #1 to #60) (Number of pieces: 60) (Type: Heavy Duty) (Material: High Speed Steel) (Drill point: 135 Deg. Split Point) (Add to cart: Add To Cart) (Drill sizes: 1-6 mm (x 0.5 mm)) (Number of pieces: 11) (Type: Produc | 1 | |
| 02-CB115-H | Jobber's Length Drill Sets (Drill sizes: #1 to #60) (Number of pieces: 60) (Type: Heavy Duty) (Material: High Speed Steel) (Drill point: 135 Deg. Split Point) (Add to cart: Add To Cart) (Drill sizes: 1-6 mm (x 0.5 mm)) (Number of pieces: 11) (Type: Produc | 2 | |
| 02-CB13-H | Jobber's Length Drill Sets (Drill sizes: #1 to #60) (Number of pieces: 60) (Type: Heavy Duty) (Material: High Speed Steel) (Drill point: 135 Deg. Split Point) (Add to cart: Add To Cart) (Drill sizes: 1-6 mm (x 0.5 mm)) (Number of pieces: 11) (Type: Produc | 1 | |
| 02-CB15-H | Jobber's Length Drill Sets (Drill sizes: #1 to #60) (Number of pieces: 60) (Type: Heavy Duty) (Material: High Speed Steel) (Drill point: 135 Deg. Split Point) (Add to cart: Add To Cart) (Drill sizes: 1-6 mm (x 0.5 mm)) (Number of pieces: 11) (Type: Produc | 1 | |
| 02-CB21-H | Jobber's Length Drill Sets (Drill sizes: #1 to #60) (Number of pieces: 60) (Type: Heavy Duty) (Material: High Speed Steel) (Drill point: 135 Deg. Split Point) (Add to cart: Add To Cart) (Drill sizes: 1-6 mm (x 0.5 mm)) (Number of pieces: 11) (Type: Produc | 1 | |
| 02-CB26-H | Jobber's Length Drill Sets (Drill sizes: #1 to #60) (Number of pieces: 60) (Type: Heavy Duty) (Material: High Speed Steel) (Drill point: 135 Deg. Split Point) (Add to cart: Add To Cart) (Drill sizes: 1-6 mm (x 0.5 mm)) (Number of pieces: 11) (Type: Produc | 1 | |
| 02-CB29-H | Jobber's Length Drill Sets (Drill sizes: #1 to #60) (Number of pieces: 60) (Type: Heavy Duty) (Material: High Speed Steel) (Drill point: 135 Deg. Split Point) (Add to cart: Add To Cart) (Drill sizes: 1-6 mm (x 0.5 mm)) (Number of pieces: 11) (Type: Produc | 1 | |
| 02-CB60-H | Jobber's Length Drill Sets (Drill sizes: #1 to #60) (Number of pieces: 60) (Type: Heavy Duty) (Material: High Speed Steel) (Drill point: 135 Deg. Split Point) (Add to cart: Add To Cart) (Drill sizes: 1-6 mm (x 0.5 mm)) (Number of pieces: 11) (Type: Produc | 1 | |
| 02-CT15-H | Jobber's Length Drill Sets (Drill sizes: #1 to #60) (Number of pieces: 60) (Type: Heavy Duty) (Material: High Speed Steel) (Drill point: 135 Deg. Split Point) (Add to cart: Add To Cart) (Drill sizes: 1-6 mm (x 0.5 mm)) (Number of pieces: 11) (Type: Produc | 1 | |
| 02-CT29-H | Jobber's Length Drill Sets (Drill sizes: #1 to #60) (Number of pieces: 60) (Type: Heavy Duty) (Material: High Speed Steel) (Drill point: 135 Deg. Split Point) (Add to cart: Add To Cart) (Drill sizes: 1-6 mm (x 0.5 mm)) (Number of pieces: 11) (Type: Produc | 1 | |
| 02-CT60-H | Jobber's Length Drill Sets (Drill sizes: #1 to #60) (Number of pieces: 60) (Type: Heavy Duty) (Material: High Speed Steel) (Drill point: 135 Deg. Split Point) (Add to cart: Add To Cart) (Drill sizes: 1-6 mm (x 0.5 mm)) (Number of pieces: 11) (Type: Produc | 1 | |
| 0214-30C-C60B | PNEUMATIC "C" COMPRESSION RIVETER (6") | 1 | |
| 0339-92 | Langa 0339-92 Tri-pod Jack Control Console, Pneumatic | 2 | |
| 0339.92 | HELPS 4 pneumatic maion console | 2 | |
| 04-22060 | Double Edge Deburr Tool (Material capacity: 1/32" to 1/2") (Add to cart: Add To Cart) | 1 | |
| 04-22065 | Double Edge Deburr Tool (Material capacity: 1/32" to 1/2") (Add to cart: Add To Cart) (Material capacity: One Set of Replacement Blades) (Add to cart: Add To Cart) | 1 | |
| 04-507-FB | Rol-Air 37° Flaring Tool (Motor: Soft Copper, Aluminum & Brass) (Materials: 3/16", 1/4", 5/16", 3/8", 1/2") (Sizes: 2.5 lbs (1.1 kgs)) (Add to cart: Add To Cart) | 1 | |
| 04-EL-1/2-1 | MONOGRAM® SHEET METAL FASTENERS ( DRILL SIZE: 1" )( MATERIAL CAPACITY: 0 TO 1/2" )( TYPE: SIDE GRIP TYPE ) | 2 | |
| 04-EL-3/4-1/2 | MONOGRAM® SHEET METAL FASTENERS ( DRILL SIZE: 1/2" )( MATERIAL CAPACITY: 0 TO 3/4" )( TYPE: SIDE GRIP TYPE ) | 1 | |
| 04-M-1/4 | MONOGRAM® SHEET METAL FASTENERS ( DRILL SIZE: 1/4" )( MATERIAL CAPACITY: 0 TO 5/16" )( TYPE: M TYPE STANDARD ) | 2 | |
| 04-M-1/8 | MONOGRAM® SHEET METAL FASTENERS ( DRILL SIZE: #30 )( MATERIAL CAPACITY: 0 TO 1/4" )( TYPE: M TYPE STANDARD ) | 2 | |
| 04-M-3/16 | MONOGRAM® SHEET METAL FASTENERS ( DRILL SIZE: #10 )( MATERIAL CAPACITY: 0 TO 1/4" )( TYPE: M TYPE STANDARD ) | 1 | |
| 04-M-3/32 | MONOGRAM® SHEET METAL FASTENERS ( DRILL SIZE: #40 )( MATERIAL CAPACITY: 0 TO 1/4" )( TYPE: M TYPE STANDARD ) | 1 | |
| 04-M-5/32 | MONOGRAM® SHEET METAL FASTENERS ( DRILL SIZE: #20 )( MATERIAL CAPACITY: 0 TO 1/4" )( TYPE: M TYPE STANDARD ) | 2 | |
| 04-ML-3/16 | MONOGRAM® SHEET METAL FASTENERS ( DRILL SIZE: #10 )( MATERIAL CAPACITY: 1/4" TO 1/2" )( TYPE: ML TYPE ) | 1 | |
| 04-ML-3/32 | MONOGRAM® SHEET METAL FASTENERS ( DRILL SIZE: #40 )( MATERIAL CAPACITY: 1/4" TO 1/2" )( TYPE: ML TYPE ) | 1 | |
| 04-ML-5/32 | MONOGRAM® SHEET METAL FASTENERS ( DRILL SIZE: #20 )( MATERIAL CAPACITY: 1/4" TO 1/2" )( TYPE: ML TYPE ) | 1 | |
| 04-SEL-1/4 | No-Mar Manual Operated Temporary Fasteners (Material capacity: 0 to 1") (Drill size: 1/4") (Color code: White) (Add to cart: Add To Cart) | 1 | |
| 04-SEL-1/8 | No-Mar Manual Operated Temporary Fasteners (Material capacity: 0 to 1") (Drill size: 1/4") (Color code: White) (Add to cart: Add To Cart) (Material capacity: 0 to 1") (Drill size: #30) (Color code: Yellow) (Add to cart: Add To Cart) | 2 | |
| 04-SEL-3/16 | No-Mar Manual Operated Temporary Fasteners (Material capacity: 0 to 1") (Drill size: 1/4") (Color code: White) (Add to cart: Add To Cart) (Material capacity: 0 to 1") (Drill size: #30) (Color code: Yellow) (Add to cart: Add To Cart) (Material capacity: 0 | 2 | |
| 04-SEL-3/32 | No-Mar Manual Operated Temporary Fasteners (Material capacity: 0 to 1") (Drill size: 1/4") (Color code: White) (Add to cart: Add To Cart) (Material capacity: 0 to 1") (Drill size: #30) (Color code: Yellow) (Add to cart: Add To Cart) (Material capacity: 0 | 2 | |
| 04-SEL-5/32 | No-Mar Manual Operated Temporary Fasteners (Material capacity: 0 to 1") (Drill size: 1/4") (Color code: White) (Add to cart: Add To Cart) (Material capacity: 0 to 1") (Drill size: #30) (Color code: Yellow) (Add to cart: Add To Cart) (Material capacity: 0 | 2 | |
| 04-SSL-1/8 | No-Mar Manual Operated Temporary Fasteners (Material capacity: 0 to 1") (Drill size: 1/4") (Color code: White) (Add to cart: Add To Cart) (Material capacity: 0 to 1") (Drill size: #30) (Color code: Yellow) (Add to cart: Add To Cart) (Material capacity: 0 | 1 | |
| 04-SSL-3/32 | No-Mar Manual Operated Temporary Fasteners (Material capacity: 0 to 1") (Drill size: 1/4") (Color code: White) (Add to cart: Add To Cart) (Material capacity: 0 to 1") (Drill size: #30) (Color code: Yellow) (Add to cart: Add To Cart) (Material capacity: 0 | 1 | |
| 04-SSL-5/32 | No-Mar Manual Operated Temporary Fasteners (Material capacity: 0 to 1") (Drill size: 1/4") (Color code: White) (Add to cart: Add To Cart) (Material capacity: 0 to 1") (Drill size: #30) (Color code: Yellow) (Add to cart: Add To Cart) (Material capacity: 0 | 1 | |
| 05-027K | WATERPROOF MAT | 1 | |
| 05-3-10405 | PNEUMATIC CHERRY RIVET GUN | 1 | |
| 0510HU | PMAT 2000 ANALYZER CABLES | 1 | |
| 05K9283 | USB PORTABLE DISKETTE DRIVE - PMAT 2000 | 1 | |
| 06AFM380D | Mitutoyo 06AFM380D USB Input Tool Direct (Digimatic USB) Flat 10-Pin Type | 1 | |
| 0714 63 450 | AUTOMATIC CENTRE PUNCH | 1 | |
| 079121-W2621 | PNEUMATIC RATCHET SCREWDRIVER W2621 | 1 | |
| 08-04-1945 | KIT PNEUMATIC TEST | 1 | |
| 08/04/1945 | 737 PNEUMATIC TEST KIT | 1 | |
| 0MAT4-71 | TRENT 700 OMAT 4-71 RAPID RELUBRICATION SYSTEM | 4 | |
| 0P41308IC | 0P41308IC, CORE ER, MATERIAL P, 2500 PERM | 1 | |
| 0PT237 | PNEUMATIC DRILL | 2 | |
| 0U147652 | PIN DEFORMATION TOOL | 1 | |
| 0U148009 | PNEUMATIC GUN | 1 | |
| 0U301047 | MATING PLATE | 1 | |
| 0U301049 | MATING PLATE | 1 | |
| 1-26136 | ANVIL - USED WITH CHICAGO PNEUMATIC PORTABLE CP-0214 RIVETER TO INSTALL RIVETS MS20615-4M3 | 1 | |
| 1-26137 | PEEN - USED WITH CHICAGO PNEUMATIC PORTABLE CP-0214 RIVETER TO INSTALL RIVETS MS20615-4M3 | 1 | |
| 1-305183-1 | EXTRACT TOOL MATE-N-LOK P | 7 | |
| 1-AM1551B | PNEUMATIQUE ANGLE DRILS | 1 | |
| 1. 5 STEP BLOCK | FOR THICKNESS AND LINEARITY CALIBRATION OF THIN MATERIALS-1018 STEEL, NICKEL PLATED | 1 | |
| 10-04232 | SIRS PRISMATIC LANDING COMPASS | 2 | |
| 10-41 | HOIST - FISHPOLE MIN 500 LB CAPACITY & 40 FT CABLE & LOAD LIMITER (MANUAL AND PNEUMATIC DRIVE) | 1 | |
| 10.5X5.5-EP.2.2 21A7 | O-RING, ID 10.5MM, CS 5.5MM, MATERIAL: EPDM | 1 | |
| 10/3641 | HOIST - FISHPOLE MIN 500 LB CAPACITY & 40 FT CABLE & LOAD LIMITER (MANUAL AND PNEUMATIC DRIVE) | 2 | |
| 10/4180 | HOIST - FISHPOLE MIN 500 LB CAPACITY &40 FT CABLE & LOAD LIMITER (MANUAL AND PNEUMATIC DRIVE) | 1 | |
| 10012-10 | TEST SET,PNEUMATIC SYSTEM | 1 | |
| 1005 | BOEING REFERENCE STANDARD PT 6 51-00-00 and 51-00-06, MATERIAL: 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance. | 6 | |
| 100B | PNEUMATIC BRACE (AIR) | 1 | |
| 101-01175 | BARFIELD AUTOMATED DIGITAL AIR DATA TEST SET DPS 1000 | 9 | |
| 101-01190 | BARFIELD DPS500 AUTOMATED DIGITAL AIR DATA TESTER. | 1 | |
| 101-38028/935 | BOROMATIC PRESSURE SWITCH TEST BOX | 1 | |
| 1015 | TRIO PACK GRYPMAT | 1 | |
| 10212-0501A | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| 10212-0501B | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| 10212-0501C | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| 10212-0501D | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| 10212-0501E | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| 10212-0501F | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| 10212-0501G | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| 10212-0501H | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| 10212-0501J | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| 10212-0501K | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| 10212-0501L | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| 1075 | INFLATOR-GAGE, PNEUMATIC TIRE | 2 | |
| 109804-7 | VALVE PNEUMATIC SHUTOFF | 1 | |
| 10C1335G01 | PMAT 2000 - CABLE BENCH PROGRAMMING SWITCH | 1 | |
| 10C2400G02 | PULLER MATING | 1 | |
| 10C2408P02 | PUSHER (INSTALLER MATING RING) | 1 | |
| 10C2410 | PULLER, MATING RING AXIS D | 1 | |
| 10C2410G01 | Pusher mating ring axis-D | 1 | |
| 10C2411 | PULLER, MATING RING AXIS E&G | 1 | |
| 10C2411G01 | Pusher mating ring axis-E&G | 1 | |
| 10C2412 | PULLER, MATING RING AXIS F | 1 | |
| 10C2412G01 | Pusher mating ring axis-F | 1 | |
| 10C2430 | PUSHER - MATING RING | 1 | |
| 10C2430P01 | Pusher mating ring | 1 | |
| 10C2432 | PULLER, MATING RING, AXIS B | 1 | |
| 10C2432G01 | PULLER, MATING RING, AXIS B | 1 | |
| 10L1201B-36 | MOTOR PENUMATIC 90 DEGREE | 1 | |
| 10LF201-36 | MOTOR PENUMATIC 90 DEGREE | 2 | |
| 10M-6298 | KIT - 757 PNEUMATIC TEST (HEALTH CHECK KIT) | 1 | |
| 10M-9315 | Pneumatic test kit (Health Check) | 1 | |
| 10M-9322 | MD90 Pneumatic adapter fitting kit (10 pieces) | 1 | |
| 10PR | EC® Reversible Trim Shears (Approximate feed rate: 3.5 ft-min.) (Mild steel capacity: .080" Inconel) (Throat capacity: 2") (Type: Pistol Grip) (Add to cart: Contact us to order) | 1 | |
| 10RS-52-2-MLG-FTG-AF | MD-10 REFERENCE STANDARD FIGURE 1.3, SHEET 1&2. MATERIAL: 7075 ALUMINUM. Includes Test Report and Certificate of Conformance. MDC-99K1082 | 1 | |
| 10RS.01.1 | BOEING REFERENCE STANDARD KC10 Page 1-6 MATERIAL: 2024-T3, 7075-T6, 6AL-4V. Includes Test Report and Certificate of Conformance. | 1 | |
| 10RS.02 | BOEING REFERENCE STANDARD KC10 53.10.001, 53.10.013/.014 Page 1-8 Material: 2024-T3 and 7075-T6, 6AL-4V or Phenolic. Includes Test Report and Certificate of Conformance. | 1 | |
| 10RS.05 | DC-10 REFERENCE STANDARD 53.10.025, 53.10.028, 53.10.030. Page 1-5. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 10RS.08 | DC-10 REFERENCE STANDARD 55.10.003/.004 Page 1-12. Material: 7075-T6 and 6AL-4V. Includes Test Report and Certificate of Conformance. | 2 | |
| 10RS.10.1 | DC-10 REFERENCE STANDARD 55.10.005/.006 Page 1-3. Material: 7075-T7. Includes Test Report and Certificate of Conformance. | 2 | |
| 10RS.15a | DC-10 SID REFERENCE STANDARD DETAILS -3,-5 & -7 PAGE 1-6. MATERIAL: 7075-T6 ALUMNIUM. Includes Certification Report and COC. | 1 | |
| 10RS.15b | DC-10 SID REFERENCE STANDARD DETAILS -3,-5, & -5, -501 ASSEMBLY PAGE 1-6. MATERIAL: 7075-T6 ALUMNIUM. Includes Certification Report and COC. | 1 | |
| 10RS.15c | DC-10 SID REFERENCE STANDARD DETAILS -7, -9 & -11, -503 ASSWMBLY PAGE 1-6. MATERIAL: 7075-T6 ALUMNIUM. Includes Certification Report and COC. | 1 | |
| 10RS.17 | DC-10 SID REFERENCE STANDARD DETAIL -3 & -5 PAGE 2-3. MATERIAL: 2024-T3 ALUMNIUM. Includes Certification Report and COC. | 1 | |
| 10RS.17.1 | DC-10 SID REFERENCE STANDARD DETAIL -3 & -5 PAGE 2-3. MATERIAL: 2024-T3 ALUMNIUM. Includes Certification Report and COC. | 1 | |
| 10RS.21 | DC-10 REFERENCE STANDARD DETAIL -1 PAGE 1. MATERIAL: 718 INCONEL. Includes Test Report and Certificate of Conformance. | 2 | |
| 10RS.22a | DC-10 REFERENCE STANDARD 54-10-029/.030 Page 1-2. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. | 2 | |
| 10RS.23 | DC-10 SID REFERENCE STANDARD 54.10.029/.030. DETAIL -1 SHEET 1 PAGE 1. MATERIAL: 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance. | 2 | |
| 10RS.25a | DC-10 SID REFERENCE STANDARD 57.10.029/.030. DETAIL -3 PAGE 1. MATERIAL: 7075-T7 ALUMNIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 10RS.25b | DC-10 SID REFERENCE STANDARD DETAIL -1 PAGE 1. MATERIAL: 7075-T7 ALUMNIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 10RS.25c | DC-10 SID REFERENCE STANDARD DETAIL -5 PAGE 1. MATERIAL: 7075-T7 ALUMNIUM. includes Test Report and Certificate of Conformance. | 1 | |
| 10RS.27b | DC-10 SID REFERENCE STANDARD DETAILS -7,-9 & -11 PAGE 1-6. MATERIAL: 7075-T6 ALUMNIUM. Includes Certification Report and COC. | 1 | |
| 10RS.32 | DC-10 REFERENCE STANDARD 54-10-027 Page 1-2. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. | 1 | |
| 10RS.33a | DC-10 REFERENCE STANDARD 54-10-027 Page 1-2. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. | 1 | |
| 10RS.33b | DC-10 REFERENCE STANDARD 54-10-027 Page 1-2. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. | 1 | |
| 10RS.35 | DC-10 REFERENCE STANDARD, SHEETS 1-4, PAGES 1-4. MATERIAL: 6AL-4V TITNIUM. Includes Test Report and Certificate of Conformance. 54.10.027 | 1 | |
| 10RS.36a | DC-10 REFERENCE STANDARD DETAIL RA11005-12-1, SHEET 1 PAGE 1&2. MATERIAL: 4130 STEEL. Includes Test Report and Certificate of Conformance. 54.10.027 | 1 | |
| 10RS.36aN | DC-10 REFERENCE STANDARD DETAIL RA11005-12-1, SHEET 1 PAGE 1&2. MATERIAL: 4130 STEEL. Includes Test Report and Certificate of Conformance. 54.10.027 | 1 | |
| 10RS.36b | DC-10 REFERENCE STANDARD DETAIL RA11005-12-2, SHEET 1 PAGE 1&2. MATERIAL: 4130 STEEL. Includes Test Report and Certificate of Conformance. 54.10.027 | 1 | |
| 10RS.36bN | DC-10 REFERENCE STANDARD DETAIL RA11005-12-2, SHEET 1 PAGE 1&2. MATERIAL: 4130 STEEL. Includes Test Report and Certificate of Conformance. 54.10.027. | 1 | |
| 10RS.39.1 | DC-10 SID REFERENCE STANDARD DETAIL -1, -3 & -5 PAGE 1-5. MATERIAL: 7075-T6 ALUMNIUM. Includes Certification Report and COC. | 1 | |
| 10RS.43 | DC-10 REFERENCE STANDARD PAGE 1. MATERIAL: 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 10RS.48 | BOEING REFERENCE STANDARD - KC10. Page 1-23. Material: 2024-T3, 7075-T6, and 7150-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| 10RS.51-MLG-FTG-FF | MD-10 REFERENCE STANDARD FIGURE 1.1, SHEET 1&2. MATERIAL: 7075 ALUMINUM. Includes Test Report and Certificate of Conformance. MDC-99K1082 | 1 | |
| 10RS.52-1-MLG-FTG-AF | MD-10 REFERENCE STANDARD FIGURE 1.2, SHEET 1&2. MATERIAL: 7075 ALUMINUM. INCLUDES 10RS.53-1 MLGF BUSHG and HLDR. Includes Test Report and Certificate of Conformance. MDC-99K1082 | 1 | |
| 10RS.53-1-MLG-FTG-CC-UPR | MD-10 REFERENCE STANDARD FIGURE 1.4, SHEET 1&2. MATERIAL: 7075 ALUMINUM. INCLUDES 10RS.53-1 MLGF BUSHG and HLDR. Includes Test Report and Certificate of Conformance. MDC-99K1082 | 1 | |
| 10RS.53-2-MLG-FTG-AA | MD-10 REFERENCE STANDARD FIGURE 1.5, SHEET 1&2. MATERIAL: 7075 ALUMINUM. INCLUDES 10RS.53-1 MLGF BUSHG and HLDR. Includes Test Report and Certificate of Conformance. MDC-99K1082 | 1 | |
| 10RS.53-3-MLG-FTG-DD | MD-10 REFERENCE STANDARD FIGURE 1.6, SHEET 1&2. MATERIAL: 7075 ALUMINUM. INCLUDES 10RS.53-1 MLGF BUSHG and HLDR. Includes Test Report and Certificate of Conformance. MDC-99K1082 | 1 | |
| 10RS.bN | DC-10 REFERENCE STANDARD DETAIL RA11005-12-2, SHEET 1 PAGE 1&2. MATERIAL: 4130 STEEL. Includes Test Report and Certificate of Conformance. 54.10.027 | 1 | |
| 11-08-03-04 | HPS1-3059A, AUTOMATIC 100 GAUSS | 1 | |
| 11-10831 | POWER SUPPLY-28V 35 AMPS, POWERMATE | 1 | |
| 11-13888 | THE ACTIVATOR 282 IS A DIRECT CONNECT, FULLY AUTOMATIC 2 AMP CHARGER CAPABLE OF CHARGING A 24 VOLT M | 1 | |
| 125 | BOEING REFERENCE STANDARD 767 PT 6 -51-00-05 FIG 2 PAGE 6 & 737 pART 6 51-00-00 FIGURE 2 PAGE 6 DETAIL II. HOLE SIZES: 0.1875, 0.250, 0.3125, 0.375, 0.4375, 0.500. Material: 4130 or 4340 Cres Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| 128 | BOEING REFERENCE STANDARD 767 PT 6 51-00-06 PAGE 4 FIGURE 1, MATERIAL: Aluminum Alloy. Includes Test Report and Certificate of Conformance. | 1 | |
| 134 | Boeing Reference Standard 707 Part 4 53-40-07 Page 12 Figure 2 (Sheet 6) Detail 3. Material: 4330M or Equivalent. Includes Test Report and Certificate of Conformance. | 4 | |
| 1162 | PNEUMATIC GREASE GUN | 2 | |
| 11012 | 12 OZ. PNEUMATIC PALMGRIP SEALANT GUN WITH METAL RETAINER | 3 | |
| 11065 | AUTOMATIC WIRE STRIPPER | 1 | |
| 11100 | Replacement Sheet Metal Hole Cutters (Cutter diameter: 1/4") (Material capacity: 1/4") (Add to cart: Add To Cart) | 1 | |
| 11104 | Replacement Sheet Metal Hole Cutters (Cutter diameter: 1/4") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 5/16") (Material capacity: 1/4") (Add to cart: Add To Cart) | 1 | |
| 11108 | Replacement Sheet Metal Hole Cutters (Cutter diameter: 1/4") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 5/16") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 3/8") (Material capacity: 1/4") (Add to cart: | 1 | |
| 11112 | Replacement Sheet Metal Hole Cutters (Cutter diameter: 1/4") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 5/16") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 3/8") (Material capacity: 1/4") (Add to cart: | 3 | |
| 11116 | Replacement Sheet Metal Hole Cutters (Cutter diameter: 1/4") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 5/16") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 3/8") (Material capacity: 1/4") (Add to cart: | 3 | |
| 11120 | Replacement Sheet Metal Hole Cutters (Cutter diameter: 1/4") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 5/16") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 3/8") (Material capacity: 1/4") (Add to cart: | 4 | |
| 11124 | Replacement Sheet Metal Hole Cutters (Cutter diameter: 1/4") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 5/16") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 3/8") (Material capacity: 1/4") (Add to cart: | 2 | |
| 11132 | Replacement Sheet Metal Hole Cutters (Cutter diameter: 1/4") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 5/16") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 3/8") (Material capacity: 1/4") (Add to cart: | 1 | |
| 11340 | Replacement Sheet Metal Hole Cutters (Cutter diameter: 1/4") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 5/16") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 3/8") (Material capacity: 1/4") (Add to cart: | 1 | |
| 11348 | Replacement Sheet Metal Hole Cutters (Cutter diameter: 1/4") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 5/16") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 3/8") (Material capacity: 1/4") (Add to cart: | 1 | |
| 11356 | Replacement Sheet Metal Hole Cutters (Cutter diameter: 1/4") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 5/16") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 3/8") (Material capacity: 1/4") (Add to cart: | 1 | |
| 11364 | Replacement Sheet Metal Hole Cutters (Cutter diameter: 1/4") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 5/16") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 3/8") (Material capacity: 1/4") (Add to cart: | 1 | |
| 11366 | Replacement Sheet Metal Hole Cutters (Cutter diameter: 1/4") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 5/16") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 3/8") (Material capacity: 1/4") (Add to cart: | 1 | |
| 11368 | Replacement Sheet Metal Hole Cutters (Cutter diameter: 1/4") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 5/16") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 3/8") (Material capacity: 1/4") (Add to cart: | 1 | |
| 12087 | CHERRYMAX PNEUMATIC RIVETER | 2 | |
| 12092 | CHERRYMAX PNEUMATIC RIVETER WITH ALL THREE HEADS | 2 | |
| 12098 | CHERRY MAX PENUMATIC RIVITER G704B WITH HEAD PULLER (KIT) | 1 | |
| 12208 | PHEUMATIC DRILL ¼ | 1 | |
| 12329 | PNEUMATIC TANDEM "C" SQUEEZE WITH 3 YOKES | 1 | |
| 12392 | PNEUMATIC "C" SQUEEZE WITH 3" YOKE | 1 | |
| 12394 | AIRFORCE PNEUMATIC TANDEM "C" SQUEEZE WITH 3" YOKE | 1 | |
| 12396 | PNEUMATIC "A" SQUEEZE WITH 3" YOKE | 2 | |
| 13200 | Replacement Sheet Metal Hole Cutters (Cutter diameter: 1/4") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 5/16") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 3/8") (Material capacity: 1/4") (Add to cart: | 1 | |
| 13202 | Replacement Sheet Metal Hole Cutters (Cutter diameter: 1/4") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 5/16") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 3/8") (Material capacity: 1/4") (Add to cart: | 1 | |
| 13204 | Replacement Sheet Metal Hole Cutters (Cutter diameter: 1/4") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 5/16") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 3/8") (Material capacity: 1/4") (Add to cart: | 2 | |
| 13206 | Replacement Sheet Metal Hole Cutters (Cutter diameter: 1/4") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 5/16") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 3/8") (Material capacity: 1/4") (Add to cart: | 1 | |
| 13208 | Replacement Sheet Metal Hole Cutters (Cutter diameter: 1/4") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 5/16") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 3/8") (Material capacity: 1/4") (Add to cart: | 1 | |
| 13210 | Replacement Sheet Metal Hole Cutters (Cutter diameter: 1/4") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 5/16") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 3/8") (Material capacity: 1/4") (Add to cart: | 8 | |
| 13212 | Replacement Sheet Metal Hole Cutters (Cutter diameter: 1/4") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 5/16") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 3/8") (Material capacity: 1/4") (Add to cart: | 1 | |
| 0056906 | THIN MATERIALS PROBE, 10 MHZ, 0.30" CONTACT DIA | 1 | |
| 065151 | Cable (RTSX-A to TorqueMate Plus) | 1 | |
| 065175 | Cable (LPX to TorqueMate or TorqueLab) | 1 | |
| 00070231 | AUTOMATIC CENTER PUNCH | 1 | |
| 00070440 | 17 AUTOMATIC CENTER PUNCH | 1 | |
| 089993 | MS UNIVERSAL SEALANT GUN, PNEUMATIC, 08993 (3M) | 1 | |
| 00090397 | PNEUMATIC CUT OFF TOOL | 1 | |
| 100501 | DEVICE FOR REMOVING / PUTTING ON PNEUMATICS | 1 | |
| 109024 | AIR PNEUMATIC PUMP | 1 | |
| 112782 | COLLIMATOR,OPTICAL | 1 | |
| 1019499 | PMAT 2000 RJ45 ADAPTER SET (BLACK) USUALLY PART OF THE PMAT BOX | 1 | |
| 1036258 | SHOP SET, PNEUMATIC | 1 | |
| 1051417 | PDL (PMAT2000) | 1 | |
| 1073106 | PMAT CABLE ASSEMBLY 9471M34G02 | 1 | |
| 1078768 | ARMATURE SPACER | 1 | |
| 01790150 | VACUUM - ULPA, HAZARDOUS MATERIAL | 1 | |
| 00190100100 | KEY FOR MATSPLIT NUTING PIN | 8 | |
| 0292697930 | CARD,T4 CONFORMATION COMPLETE | 1 | |
| 0319739830 | PIPE,AUTOMATIC BLEED | 1 | |
| 0319927110 | SPOOL VALVE ASSY,MATCHED | 1 | |
| 1100954036 | TOOL - CABLE REPAIR EQUIPMENT MAT | 1 | |
| 00244400652000 | PNEUMATIC TEST TOOL | 1 | |
| 110762AP | VACUUM - ULPA, HAZARDOUS MATERIAL | 1 | |
| 111062-0153 | AVNET DATA LOADER CABLE FOR PMAT2000 | 1 | |
| 11380-1 | MFT PNEUMATIC ACTUATOR KIT | 1 | |
| 114A-3 | PNEUMATIC RIVETER | 1 | |
| 1159GSE50274-3 | PROTECTIVE MAT R/H | 1 | |
| 1159SEFL20284-1 | WING FUEL TANK PNEUMATIC ADAPTER ASSEMBLY | 1 | |
| 117A | BALLMAT PIN WRENCH TOOL | 1 | |
| 11A | Cyclo® Orbital Aircraft Polishers (Nominal diameter: 0.45 hp Pneumatic) (Rpm (no load): 3200) (Add to cart: Contact us to order) | 1 | |
| 11C3004-PPK | PNEUMATIC POWER OPTION - FIXTURE, SHIPPING | 1 | |
| 11C3989G01 | KIT-R/I CARBONE SEAL & MATING RING (ALT SPL-9648) | 1 | |
| 11C3989G02 | KIT-R/I CARBONE SEAL & MATING RING (ALT SPL-9648) | 2 | |
| 11C3990 | DRIVE PAD CARBON SEAL & MATING | 1 | |
| 11C3990G01 | SPL-12371 - DRIVE PAD CARBON SEAL & MATING RING KIT | 1 | |
| 11C3990G02 | DRIVE PAD CARBON SEAL & MATING RING KIT | 1 | |
| 11C3991G01 | SPL-12372 - EDP & FUEL PUMP CARBON SEAL & MATING RING KIT | 1 | |
| 11C3991G02 | Tool set carbon seal and mating ring replacement HP&FP AGBX | 1 | |
| 11C3992G01 | SPL-12373 - IDG CARBON SEAL & MATING RING KIT | 1 | |
| 11C3992G02 | SPL-12373 - IDG CARBON SEAL & MATING RING KIT | 1 | |
| 11C3993G02 | Tool set mating ring replacement VFSG&INPUT(1B) AGBX | 1 | |
| 11C3994G01 | IDG MATING RING KIT (SPL-12374) | 1 | |
| 11C3994G02 | Tool set mating ring replacement IDG (2B) AGBX | 1 | |
| 11C3995G01 | SPL-11510 - CARBON SEAL & MATING RING KIT | 1 | |
| 11C3995G02 | SPL-11510 - CARBON SEAL & MATING RING KIT | 1 | |
| 11C4487-PPK | PNEUMATIC POWER OPTION - STAND, SHIPPING | 1 | |
| 11C4514 | FAN CASE PROTECTIVE MAT | 1 | |
| 11C4514G01 | FAN CASE PROTECTIVE MAT | 1 | |
| 11WS | Milbar 11WS Black 6 Automatic Return Safety Wire Pliers | 1 | |
| 12-500-11 | KIT DE PROGRAMMATION 500-32 | 1 | |
| 12-503-23 | KIT DE PROGRAMMATION CPI 12-503-23 | 1 | |
| 1207MAX-D3 | WRENCH,RATCHET,PNEUMATIC, 3/8 IN,60 FT/LB TORQUE,1/4 IN NPTF | 1 | |
| 1213855-1 | SDE PNEUMATIC HAND TOOL ASSY. | 1 | |
| 12139671 | PNEUMATIC PRESSURE PUMP | 1 | |
| 121666-001 | OUTPUT CABLE ADAPTER (QUICK DISCONNECT) FOR CHRISTIE AUTOMATIC REFLEX CHARGER/ANALYZER | 3 | |
| 125HBL-4-4 | PNEUMATIC FITTING FOR OD TUBING -1/4X1/4 HOSE BARB | 2 | |
| 125HBL4-4 | PNEUMATIC FITTING FOR OD TUBING -1/4X1/4 HOSE BARB | 2 | |
| 12L1000-36 | MOTOR PENUMATIC 30,000 RPM | 1 | |
| 12S1282-02 | DOTCO PNEUMATIC PANEL SAW | 1 | |
| 13-04-1945 | ENGINE PNEUMATIC TEST KIT | 1 | |
| 130A | BOEING THICKNESS STANDARD FOR X-BAND RADOMES DETAIL IV 737 PT 6 53-50-00. MATERIAL: LUCITE. Includes Test Report and Certificate of Conformance. | 2 | |
| 130B | BOEING THICKNESS STANDARD FOR C-BAND RADOMES DETAIL V 737 PT 6 53-50-00. MATERIAL: LUCITE. Includes Test Report and Certificate of Conformance. | 2 | |
| 130C | BOEING REFERENCE STANDARD Part 6 53-50-00 Page 13 Figure 1. Material: Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 1320369-1 | PNEUMATIC CRIMP HEAD 8AWG COP. | 1 | |
| 135-9493 | WIRE STRIPPER, AUTOMATIC, AWS, MAKE- DRAPER TOOLS | 1 | |
| 135DPV-14B-50 | VARIABLE SPEED AIR DRILLS (TALADRO NEUMÁTICO) | 1 | |
| 136/347/6 | PROBE: FOR SIGMATEST D-2.068 EDDY C/SET | 1 | |
| 13822-00 | RESPIRATOR REGULATOR MATING CONNECTOR | 3 | |
| 14-6801-0120 | BEAD BREAKER, PNEUMATIC TIRE | 12 | |
| 14-6878-0110 | BEAD BREAKER,PNEUMATIC TIRE | 5 | |
| 140-600 | TIRE COVERS (no wheelpant faring) (specify material type) (set of 2) | 1 | |
| 140-SP | Pneumatic Threaded Insert Driver Kits (Capacity: 6-32 to 1/4"-20 & 4mm to 6mm) (Includes*: Pneumatic Insert Driver, 6-32) (Add to cart: Add To Cart) | 1 | |
| 1410 | DRILL,PNEUMATIC,PORTABLE (027698 SKHC) | 1 | |
| 1442 | RIVNUT RIVETER KIT BRAND: ASTRO PNEUMATIC | 2 | |
| 1446HPL | ***DISCONTINUED MODEL*** SIOUX Pneumatic In-Line Sheet Metal Shears ONLY ONE AVAILABLE AT THIS PRICE! | 1 | |
| 14628 | Replacement Sheet Metal Hole Cutters (Cutter diameter: 1/4") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 5/16") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 3/8") (Material capacity: 1/4") (Add to cart: | 1 | |
| 14632 | Replacement Sheet Metal Hole Cutters (Cutter diameter: 1/4") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 5/16") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 3/8") (Material capacity: 1/4") (Add to cart: | 1 | |
| 14636 | Replacement Sheet Metal Hole Cutters (Cutter diameter: 1/4") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 5/16") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 3/8") (Material capacity: 1/4") (Add to cart: | 1 | |
| 14640 | Replacement Sheet Metal Hole Cutters (Cutter diameter: 1/4") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 5/16") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 3/8") (Material capacity: 1/4") (Add to cart: | 1 | |
| 14644 | Replacement Sheet Metal Hole Cutters (Cutter diameter: 1/4") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 5/16") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 3/8") (Material capacity: 1/4") (Add to cart: | 1 | |
| 14656 | Replacement Sheet Metal Hole Cutters (Cutter diameter: 1/4") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 5/16") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 3/8") (Material capacity: 1/4") (Add to cart: | 1 | |
| 14662 | Replacement Sheet Metal Hole Cutters (Cutter diameter: 1/4") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 5/16") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 3/8") (Material capacity: 1/4") (Add to cart: | 1 | |
| 14674 | Replacement Sheet Metal Hole Cutters (Cutter diameter: 1/4") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 5/16") (Material capacity: 1/4") (Add to cart: Add To Cart) (Cutter diameter: 3/8") (Material capacity: 1/4") (Add to cart: | 1 | |
| 14A6801-0120 | BEADBREAKER, PNEUMATIC | 3 | |
| 14B6801-0120 | HIGH PRESSURE PNEUMATIC TIRE BEAD BREAKER - TRONAIR | 5 | |
| 14CFS91-38 | PNEUMATIC DRILL GUN | 3 | |
| 14CFS93-38 | DOTCO 3200 RPM MATKAP | 2 | |
| 14CFS93-99 | DOTCO PNEUMATIC SHEARS | 1 | |
| 15-100 | ARO Type 14 Air Hose Quick Connects (Type: Automatic 1/4" NPT, Female Thread) (Add to cart: Add To Cart) | 1 | |
| 15-101 | ARO Type 14 Air Hose Quick Connects (Type: Automatic 1/4" NPT, Female Thread) (Add to cart: Add To Cart) (Type: Automatic 1/4" NPT, Male Thread) (Add to cart: Add To Cart) | 5 | |
| 15-106 | ARO Type 14 Air Hose Quick Connects (Type: Automatic 1/4" NPT, Female Thread) (Add to cart: Add To Cart) (Type: Automatic 1/4" NPT, Male Thread) (Add to cart: Add To Cart) (Type: Automatic 3/8" NPT, Female Thread) (Add to cart: Add To Cart) | 1 | |
| 15-107 | ARO Type 14 Air Hose Quick Connects (Type: Automatic 1/4" NPT, Female Thread) (Add to cart: Add To Cart) (Type: Automatic 1/4" NPT, Male Thread) (Add to cart: Add To Cart) (Type: Automatic 3/8" NPT, Female Thread) (Add to cart: Add To Cart) (Type: Automat | 1 | |
| 15-1580 | AIR VACUUM CLEANER (PNEUMATIC) | 1 | |
| 15-1780 | PNEUMATIC VACUUM CLEANER | 1 | |
| 15-200 | ARO Type 14 Air Hose Quick Connects (Type: Automatic 1/4" NPT, Female Thread) (Add to cart: Add To Cart) (Type: Automatic 1/4" NPT, Male Thread) (Add to cart: Add To Cart) (Type: Automatic 3/8" NPT, Female Thread) (Add to cart: Add To Cart) (Type: Automat | 2 | |
| 15-202 | ARO Type 14 Air Hose Quick Connects (Type: Automatic 1/4" NPT, Female Thread) (Add to cart: Add To Cart) (Type: Automatic 1/4" NPT, Male Thread) (Add to cart: Add To Cart) (Type: Automatic 3/8" NPT, Female Thread) (Add to cart: Add To Cart) (Type: Automat | 1 | |
| 15-300 | ARO Type 14 Air Hose Quick Connects (Type: Automatic 1/4" NPT, Female Thread) (Add to cart: Add To Cart) (Type: Automatic 1/4" NPT, Male Thread) (Add to cart: Add To Cart) (Type: Automatic 3/8" NPT, Female Thread) (Add to cart: Add To Cart) (Type: Automat | 2 | |
| 150-170 | WHEELPANT COVERS (specify material type) (set of 3) | 1 | |
| 1500 | PNEUMATIC VACUMN GUARDAIR 1500 | 2 | |
| 15000 | HYDRAULIC AND PNEUMATIC TEST ACCESORY | 4 | |
| 151TC | PNEUMATIC RIVET SQUEEZE | 1 | |
| 1542M6 | PISTOLET OLEOPNEUMATIQUE | 1 | |
| 1564T62 | ENGRAVER MACHINE (HAND HELD PNEUMATIC) | 1 | |
| 158QGDBV | 158QGDBV-S400 SERIES-PORTABLE PNUEMATIC | 1 | |
| 15C1460 | Pneumatic Aircraft Rivet Shaving Drill DOTCO | 1 | |
| 15F1893 | TIRE: RUBBER,PNEUMATIC,W/ST RIM, | 2 | |
| 15LF253-62 | PNEUMATIC ANGLE DRILL | 1 | |
| 15LN284-52 | PNEUMATIC ANGLE DRILL 90 DEGREE | 1 | |
| 15LN285-52 | RIGHT ANGLE PNEUMATIC DRILL | 1 | |
| 15LS285-62 | RIGHT ANGLE PNEUMATIC DRILL | 1 | |
| 15LS285-92 | PNEUMATIC ANGLE DRILL 90 DEGREE | 1 | |
| 15R11 3FB | PARKER PNEUMATIC REGULATOR | 1 | |
| 16-0803 | HYDRAULIC/PNEUMATIC TOOL | 1 | |
| 16-0987 | PNEUMATIC CRIMPING TOOL (ICORE 16-0987) | 1 | |
| 16-803 | ICORE 16-803, HYDRAULIC/PNEUMATIC CRIMPING TOOL | 1 | |
| 160-SP | Pneumatic Threaded Insert Driver Kits (Capacity: 6-32 to 1/4"-20 & 4mm to 6mm) (Includes*: Pneumatic Insert Driver, 6-32) (Add to cart: Add To Cart) (Capacity: 3.5 to 10 mm 4-40 to 1/2") (Includes*: Pneumatic Insert Driver, 6-32) (Add to cart: Add To Cart | 1 | |
| 16120 | WHEEL, 16", PNEUMATIC, 3/4" | 1 | |
| 16535 | 737 PNEUMATIC TEST KIT | 1 | |
| 16536 | TEST KIT PNEUMATIC | 1 | |
| 16570 | PNEUMATIC SEALANT GUN 250A-6 950-60HA | 1 | |
| 16572 | PISTOLET PRC PNEUMATIC | 2 | |
| 16U46511-1 | AUTOMATIC FORWARD FUEL TRIM TEST ADAPTER | 1 | |
| 17-3XSP | PNEUMATIC HAMMER | 1 | |
| 17-4PH | 17-4 PH STEEL BLOCK 110MM(3.937") X 18MM(7.09") X 15MM(.591") BLOCK. MATERIAL: 17-4PH STEEL. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| 17-4PH BLOCK | 17-4 PH Steel Block 110mm(3.937") x 18mm(7.09") x 15mm(.591") Block. Material: 17-4PH Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| 17-4XSP | PNEUMATIC RIVET GUN | 2 | |
| 170 | INDUSTRIAL-GRADE CURING OVEN WITH PRECISE TEMPERATURE CONTROLS, IDEAL FOR COMPOSITE MATERIALS. | 1 | |
| 170-600 | TIRE COVERS (no wheelpant faring) (specify material type) (set of 2) | 1 | |
| 1714214A | STARTER, PNEUMATIC | 1 | |
| 172-120 | MAIN GEAR WHEELPANT COVERS (specify material type) (set of 2) | 1 | |
| 172-125 | NOSE WHEELPANT COVER (specify material type) | 1 | |
| 17283-17146 | RIVETING PNEUMATIC CLAMP(735A-5 ) | 1 | |
| 173MAT | STARRETT FEELER GAUGE SETS FOR TIGHT SPOTS MANUFACTURER MODEL NO.173MAT (CAT. NO.2070A44) | 2 | |
| 1752938-1 | PEW 12 TOOL(3-5MM MATE-N-LOK) | 1 | |
| 177-170 | WHEELPANT COVERS (specify material type) (set of 3) | 1 | |
| 177-600 | TIRE COVERS (no wheelpant faring) (specify material type) (set of 3) | 1 | |
| 177090-02 | NTERFACE UNIT,AUTOMATIC DATA PROCESSING KIT, SEA L | 1 | |
| 17A1514PO1 | PNEUMATIC WRENCH | 1 | |
| 17G460219-1 | TEST SET,PNEUMATIC SYSTEM COMPONENTS | 1 | |
| 17P9M2007 | Douglas Reference Standard Assembly For the Ultrasonic Calibration of Upper Wing Skin to common Stringer, Figure24-4 sheets 253. Material: 7075 Aluminum. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| 17TES0420 | CVDR AUTOMATED TEST STATION SOFTWARE (CATS) L3AP | 1 | |
| 18-013-028 | PNEUMATIC PRESSURE GAUGE 0-25BAR R1/8“BOTTOM PORT DIAMETER50MM | 1 | |
| 18-4201-1010 | BOOSTER NITROGEN PNEUMATIC | 9 | |
| 18-900L | 18" LASER DRILL PRESS WITH VARIABLE SPEED, IDEAL FOR PRECISE DRILLING IN VARIOUS MATERIALS, INCLUDING COMPOSITES. | 1 | |
| 180-600 | TIRE COVERS (no wheelpant faring) (specify material type) (set of 2) | 1 | |
| 18000-02 | DATA LOADER - PORTABLE, ARINC 615/A WITH MASS STORAGE DEVICE. TOOL MODEL NAME IS "EMAT" | 1 | |
| 1818292 TYPE 093F020 | SINGLE ACTING SPRING RETURN PNEUMATIC ACTUATOR | 1 | |
| 182-140 | NOSE WHEELPANT COVER (specify material type) | 1 | |
| 182-142 | MAIN GEAR WHEELPANT COVERS (specify material type) (set of 2) | 1 | |
| 1850A4268 | SPECIAL PURPOSE TYPE:TURBINE BORESCOPE POWER:BATTERY SIZE:NA MATL:NA GE TURBINE BORESCOPE TOOL MODEL: XLVUD6120 PART NO: 1850A4268 MANUFACTURER: GE | 1 | |
| 187-551 | Mitutoyo 187-551 - Digimatic Universal Protractor 6" | 1 | |
| 187-552 | Mitutoyo 187-552 - Digimatic Universal Protractor 12" | 1 | |
| 1875BH23N | SPACEMATIC GUNS #3 SHORT | 1 | |
| 18932 | DRIVE MOTOR, PNEUMATIC | 1 | |
| 189896-1 | PNEUMATIC CRIMP HEAD 18-8 CES | 1 | |
| 18AA | STARRETT® Automatic Center Punch - USA MADE! | 1 | |
| 18C8302 | PULLER, MAT RING, AXIS-D | 1 | |
| 18C8303 | PULL, MAT RING, AXIS-C,K | 1 | |
| 18C8304 | PULLER, MAT RING, AXIS-F | 1 | |
| 18C8306 | PULLER, MAT RING, AXIS-E | 1 | |
| 18D10647 | ACCESSORY GEARBOX PULLER SEAL MATING RING | 1 | |
| 19279-0001 | AT-200™ Hand Held Pneumatic Tool, Without Crimp Dies | 1 | |
| 1930 | MATT SCREEN PRINT CLEAR | 1 | |
| 19307588-30 | PMAT2000 TEAC FLOPPY DISK DRIVE MODEL:FD-05HF 8830 | 1 | |
| 19390 | Central Pneumatic 19390 Replacement Canvas Bag | 1 | |
| 1945 . 04 . 08 | PNEUMATIC TEST KIT | 2 | |
| 1945-04-01 | PNEUMATICT TEST KIT SWITCH | 1 | |
| 1945-04-05 | PNEUMATIC TEST KIT | 1 | |
| 1945-04-08 | BLEED TEST SET - B737 Classic/Next Gen Engine Pneumatic Test Kit | 2 | |
| 1945-04-08-03-03G | PNEUMATIC TEST KIT | 3 | |
| 1945-04-08-03H | 737 PNEUMATIC TEST KIT | 2 | |
| 1945-04-08-09-01 | PNEUMATIC TEST KIT | 1 | |
| 1945-04-08-09-02 | PNEUMATIC TEST KIT | 1 | |
| 1945-04-08-09-03 | PNEUMATIC TEST KIT | 1 | |
| 1945-04-08-09-04 | PNEUMATIC TEST KIT | 1 | |
| 1945-04-08-09-05 | PNEUMATIC TEST KIT | 1 | |
| 1945-04-08-09-06 | PNEUMATIC TEST KIT | 1 | |
| 1945-04-08-09-ALL | PNEUMATIC TEST KIT FITTINGS B737CL | 1 | |
| 1945-04-08-09ALL | PNEUMATIC TEST KIT FITTINGS B737CL | 1 | |
| 1945-04-08-10-01 | PNEUMATIC TEST KIT | 1 | |
| 1945-04-08-10-02 | PNEUMATIC TEST KIT | 1 | |
| 1945-04-08-10-03 | PNEUMATIC TEST KIT | 1 | |
| 1945-04-08-10-05 | PNEUMATIC TEST KIT | 1 | |
| 1945-04-09 | 737 PNEUMATIC TEST KIT | 5 | |
| 1945-04-10 | PNEUMATICT TEST KIT SWITCH | 1 | |
| 1945-04-13 | AIR PNEUMATIC TEST KIT | 2 | |
| 1945-045-08 | PNEUMATIC TEST KIT 737 NG | 1 | |
| 1945.04.08 | PNEUMATIC TEST KIT | 2 | |
| 194504-09 | PNEUMATIC TEST KIT | 5 | |
| 19TCA02Q | SCREWDRIVER - PISTOL GRIP, PNEUMATIC DRIVE (REVERSIBLE) | 1 | |
| 19TCA04Q | SCREWDRIVER - PNEUMATIC, REVERSIBLE (MAXIMUM SPEED = 3898 RPM, MAXIMUM TORQUE = 40 IN-LBS) | 1 | |
| 1AM1141-51K | PNEUMATIC DRILL FOR WORK ON AIRCRAFT | 3 | |
| 1AM1141/51K | PNEUMATIC DRILL | 3 | |
| 1C8118G03 | FIXTURE ALIGNMENT GG/PT MATING | 1 | |
| 1C8182 | PULLER RING MATING | 2 | |
| 1TD1133D07001-2001 | Seyer Industries reference standard. Material: 2024-T351 Aluminum...Chamfer EDM Notch Size: .030" x .030" x .005" +/- .002"...Bore EDM Notch Size: .030" x .030" x .005" +/- .002". Includes Test Report and Certificate of Conformance. Part Serial Number:... | 1 | |
| 1W393 | Milbar 1W393 Black 9 Automatic Return Safety Wire Pliers | 1 | |
| 2-068-01-1363476 | PROBE FOR SIGMATEST | 1 | |
| 2-069 | COUNDUCTIVITY TEST EQUIPMENT (SIGMATEST) | 1 | |
| 2-069US9068074 | PROBE FOR SIGMATEST | 1 | |
| 2-235 | OIL SAMPLE KIT (OMAT) | 2 | |
| 2-835-01-9331 | AIRBUS CALIBRATION BLOCK. MATERIAL: 304 Stainless Steel, 0.2mm, 0.5mm, 1mm EDM SLOTS. PART 6: 51-63-01 page 601 figure 601 Includes Test Report and Certificate of Conformance. | 1 | |
| 2.068.82 | SIGMATEST D WITH PROVE 14 mm | 1 | |
| 2.069.69-0001 | SIGMATEST Flex Probe 8mm - straight | 1 | |
| 2.069US.D0101-T | SIGMATEST PROBE KIT | 1 | |
| 2.070.01-3408 | PROBE 8MM FLEX SIGMATEST 2.070 | 1 | |
| 20-109 | CLECO PNEUMATIC TOOL 20-109 | 1 | |
| 20-115 | CLECO PNEUMATIC TOOL 20-115 | 1 | |
| 20-4503-6000 | 1/4 BSPP MATES | 8 | |
| 2021-0324 | STAPLER PNEUMATIC TOOL | 1 | |
| 2024187-1 | Pneumatic Tool Base | 1 | |
| 206 | BOEING REFERENCE STANDARD 727 PT 6 57-10-27 FIG 19. MATERIAL 2024 ALUMINUM (FASTENERS: BACR15DG10DD14)Includes Test Report and Certificate of Conformance. | 3 | |
| 208 | BOEING REFERENCE STANDARD 727 PT 6 57-10-27 FIG 19. MATERIAL 2024 ALUMINUM (FASTENERS: BACB30PT5-10, BACN10TN5)Includes Test Report and Certificate of Conformance. | 2 | |
| 2000 | PNEUMATIC LIFT-PLATFORM | 5 | |
| 2007 | COUNDUCTIVITY TEST EQUIPMENT (SIGMATEST) | 1 | |
| 2012 | PNEUMATIC RIVETER 2670LBS / STROKE 0.650 | 1 | |
| 2025 | TOOL-PNEUMATIC RIVETER PNEUDRAULIC INSTALLATION | 3 | |
| 20244 | PNEUMATIC RANDOM ORBITAL SANDER, 1.25 INCH DIAMETER, 3/16 INCH ORBIT | 1 | |
| 2024421-1 | Pneumatic Tool Base | 1 | |
| 2024423-1 | Pneumatic Tool Driver | 1 | |
| 2024424-1 | Pneumatic Tool Driver | 1 | |
| 2024425-1 | Pneumatic Tool Driver | 1 | |
| 2024601-1 | Pneumatic Tool Rivet Set | 1 | |
| 20252 | PNEUMATIC RANDOM ORBITAL SANDER, 3 INCH DIAMETER, 3/16 INCH ORBIT, WITH SELF-GENERATED VACUUM | 1 | |
| 204-94034-1 | Boeing Reference Standard- Lower Lug APE-1 Primary , D204-12769-6 ASIP Inspection Program. Material: 4340 Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| 206-119 | NOSE WHEELPANT COVER (newer models) (specify material type) | 1 | |
| 206-120 | MAIN GEAR WHEELPANT COVERS (newer models) (specify material type) (set of 2) | 1 | |
| 20635A33 | DIGIMATIC DEPTH GAGE | 1 | |
| 2078.30.96.01 | HYDRAULIC SENSOR 1000 BAR (14504 PSI) - MATERIAIS DIVERSOS | 1 | |
| 209-534 | Mitutoyo 209-534 Digimatic Coolant Proof Outside Caliper Gauge 0-60 mm | 1 | |
| 209-551 | Mitutoyo 209-551 Digimatic Caliper Gauge 5-15mm | 1 | |
| 209-572 | Mitutoyo 209-572 Digimatic Coolant Proof Outside Caliper Gauge 0-20 mm | 1 | |
| 209-904 | Mitutoyo 209-904 Digimatic Caliper Gauge 13-43mm | 1 | |
| 20915A21 | DIGIMATIC DEPTH GAGE | 1 | |
| 209A7849 | ROEBUCK AUTOMATIC CENTRE PUNCH | 1 | |
| 21-30-04 | KIT PNEUMATIC PRESSURE TEST(115V/60HZ) | 1 | |
| 21-30-07 | KIT PNEUMATIC PRESSURE TEST ALTITUDE LIMITER OUR FLOW VALVE | 1 | |
| 210-600 | TIRE COVERS (no wheelpant faring) (specify material type) (set of 3) | 1 | |
| 2117-T010-016 | VOIR JOBBOSS POUR PLUS DINFORMATIONS | 1 | |
| 2129M60G02 | Mating ring replacement fixture | 1 | |
| 2129M63G02 | Mating ring replacement fixture | 1 | |
| 2129M68G02 | Mating ring replacement fixture | 1 | |
| 21340 | Economy Pneumatic Nibbler (Capacity (steel): -) (Overall length: -) (Description: Replacement Punch) (Add to cart: Add To Cart) | 1 | |
| 21341 | Economy Pneumatic Nibbler (Capacity (steel): -) (Overall length: -) (Description: Replacement Punch) (Add to cart: Add To Cart) (Capacity (steel): -) (Overall length: -) (Description: Replacement Die) (Add to cart: Add To Cart) | 1 | |
| 217-085000 | PNEUMATIC INSERT POWER TOOL KEYLOCKING INSERTS | 1 | |
| 21C5931 | CONTROL SET PNEUMATIC VG ACTUATION | 1 | |
| 21C7298G03 | PULLER , MATING RING | 1 | |
| 21C7702G01 | PULLER MATING RING | 1 | |
| 21C7872 | PULLER - SEAL - MATING RING | 1 | |
| 21C7872G01 | Puller seal mating ring | 1 | |
| 21C7877G01 | DEAL MATING RING PULLER | 1 | |
| 21HR-550 | SANDER,DISK,PNEUMATIC,PORTABLE | 1 | |
| 221269-220 | PNEUMATIC/ELECTRIC SEMKIT AUTO PACKAGE MIXER,220V | 1 | |
| 2217 HPSOV/PRSOV PNEUMATIC TEST SET | HPSOV/PRSOV PNEUMATIC TEST SET | 1 | |
| 223779-01 | LMAT-2000 PART SELECTOR SOFTWARE. | 1 | |
| 2238231-08 | LOADER - DATA, ARINC 615/615A (MODEL IS PMAT 2000) (COM-4963) | 1 | |
| 2248300-1 | PMAT CABLE | 1 | |
| 2254850-1 | PMAT XS TELEDYNE CONTROLS | 1 | |
| 23 | Tesa 03230060 GTL 212 / Pneumatic probes ± 1,5 mm, 3,2 mm bolt travel, linear (GTL212) | 1 | |
| 2217 | HPSOV/PRSOV PNEUMATIC TEST SET | 1 | |
| 23 CNC | HIGH-PERFORMANCE CNC ROUTER DESIGNED FOR PRECISION CUTTING IN VARIOUS MATERIALS, INCLUDING COMPOSITES. | 1 | |
| 235508-15 | SPRING MATCHED PART, USED WITH ITEM NUMBER 240 | 1 | |
| 239 | BOEING REFERENCE STANDARD 727 PT 6 57-10-27 FIG 18. MATERIAL 2024 ALUMINUM (FASTENERS: BACR15DG10DD)Includes Test Report and Certificate of Conformance. | 1 | |
| 240 | BOEING REFERENCE STANDARD 727 PT 6 57-10-27 FIG 18. MATERIAL 2024 ALUMINUM (FASTENERS: BACR15DG10DD)Includes Test Report and Certificate of Conformance. | 1 | |
| 23954 | CLEANER, VACUUM, PNEUMATIC | 3 | |
| 244 HUCK | PNEUMATIC RIVETER | 1 | |
| 244OSX HUCK | INSTL-TOOL PNEUMATIC | 1 | |
| 244X | PNEUMATIC RIVET GUN | 5 | |
| 244X HUCK | INSTL-TOOL PNEUMATIC | 1 | |
| 245 | HUCK PNEUMATIC RIVETER | 1 | |
| 24X7MATRIX | 24X7MATRIX;24 X 7 Telephone Support - Matrix - 2 Named Contracts | 1 | |
| 250-A | PNEUMATIC SEALANT GUN | 6 | |
| 250-A60ZW | PNEUMATIC SEALANT GUN | 1 | |
| 250-B | 2.5OZ PNEUMATIC CARTRIDGE GUN | 1 | |
| 250080B | PNEUMATIC SEALANT GUN | 1 | |
| 250A | PNEUMATIC SEALANT GUN | 6 | |
| 250A 250255 | SEMCO PNEUMATIC SEALANT GUN – 2,5 oz with handle (incl. 2,5 oz Retainer) | 1 | |
| 2521A778 | TAP;HAND, SIZE:3/4 IN, THREADS:10 TPI UNC, THREAD TYPE:RIGHT HAND, MATERIAL:HSS, (MC MASTER) | 1 | |
| 254 HUCK | INSTL TOOL PNEUMATIC | 1 | |
| 25W | Milbar 25W Black 6 Reversible-Automatic Return Safety Wire Pliers | 5 | |
| 263076-3 | LOCATOR HOLDER PNEUMATIC VALVE TEST | 1 | |
| 263076-4 | LOCATOR HOLDER PNEUMATIC VALVE TEST | 1 | |
| 263076-5 | LOCATOR HOLDER PNEUMATIC VALVE TEST | 1 | |
| 263076-7 | LOCATOR, HOLDER, PNEUMATIC VALVE TEST | 1 | |
| 263076-8 | LOCATOR HOLDER PNEUMATIC VALVE TEST | 1 | |
| 263076-9 | LOCATOR HOLDER PNEUMATIC VALVE TEST | 1 | |
| 272 | Boeing Reference Standard, 727 PT 6 55-10-27 PROCEDURE 2 Figure 1 (Sheets 1- 2) Pages 4- 5. Material: 7075-T6 Aluminum and AL-NI Bronze Bushing Per AMS 4640. Includes Test Report and Certificate of Conformance. | 1 | |
| 26318 | MATRIC TAP & DIE SUPPER SET TOOLS | 1 | |
| 264-000-269 | Mitutoyo 264-000-269 4 Port Digimatic Multiplexer | 1 | |
| 264-000-270 | Mitutoyo 264-000-270 8 Port Digimatic Multiplexer | 1 | |
| 265-161-2 | PNEUMATIC PISTOL | 1 | |
| 269C3 | GRIP GAGE FOR DETERMINING MATERIAL THICKNESS | 10 | |
| 269C5 | Cherry Gauges (Description: Maxibolt Gauge) (Add to cart: Add To Cart) (Description: Rivet Grip & Diameter Gauge) (Add to cart: Add To Cart) (Description: Material thickness & Grip) (Add to cart: Add To Cart) | 1 | |
| 26W | Milbar 26W 9 Reversible-Automatic Return Safety Wire Pliers | 2 | |
| 27-1-6033 | Fokker 50/60 calibration standard Part 6 53-40-05 pages 7&8 figure 4&5. Material 2024-T3 Aluminum. | 1 | |
| 27-95031-001 | Fairchild METRO 23, Model SA227-CC, METRO 23, Model SA227-DC,Reference standard for inspection of the MLG and NLG Yoke Assembly. Material: 2024-T351 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 2703-400 | COUPLING, PNEUMATIC DUCT | 16 | |
| 270A-2 | Sioux Tool 270A-2 Pneumatic Rivet Gun | 3 | |
| 270A-4 | Sioux Tool 270A-4 Red 4 Stroke 1,700 blowsmin, Pistol Grip Pneumatic Rivet Gun | 2 | |
| 272-15 | Multiple target collimator | 1 | |
| 28-0-1274 | TESTER PNUEMATIC VALVE | 2 | |
| 28-0-1274-K | PNEUMATIC CALVE TESTER | 1 | |
| 28-0-4832B | TEST SET-PNEUMATIC VALVES | 1 | |
| 28-0-6049 | Fokker 70/100 Calibration Standard, Part 6 53-10-18 Page 12 Figure 8. Material: 2024-T351 Aluminum. Paint with Primer. Includes Test Report and Certificate of Conformance. | 1 | |
| 28.0-1274 | PNEUMATIC TEST BOX | 2 | |
| 28.0-1274K | PNEUMATIC VALVE TESTER | 1 | |
| 28044TR | TIRE: PNEUMATIC,2.80X250-4, | 2 | |
| 281160-1 | TEST PANEL PNEUMATIC CONTROL | 1 | |
| 281160-1,281160-2 | PNEUMATIC CONTROL TEST PANEL | 1 | |
| 281160-2 | PNEUMATIC CONTROL TEST PANEL | 1 | |
| 281419-1 | BASE HOLDER PNEUMATIC VALVE TEST | 1 | |
| 285-A-MIXER | PORTABLE SEMI AUTOMATIC MIXER BLACK COLOR | 1 | |
| 28503 | PNEUMATIC RANDOM ORBITAL SANDER, 3 INCH DIAMETER, 3/16 INCH ORBIT, WITH SELF-GENERATED VACUUM | 1 | |
| 285748-1-1 | AUTOMATIC CENTER PUNCH | 1 | |
| 287067-1 | RIVET SET,PNEUMATIC TOOL | 1 | |
| 287467-1-1 | PNEUMATIC RIVETING MACHINE | 3 | |
| 287487-1 | RIVETING MACHINE PNEUMATIC | 1 | |
| 287647-1 | PNEUMATIC RIVETING MACHINE | 1 | |
| 287702-1 | RIVET SET PNEUMATIC TOOL | 1 | |
| 287816-1 | PNEUMATIC RIVET SET TOOL | 1 | |
| 287846-1 | Pneumatic Rivet Set | 1 | |
| 287847-1 | RIVETING MACHINE, PNEUMATIC | 2 | |
| 287847-1PM | RIVETING MACHINE, PNEUMATIC | 1 | |
| 287849-1 | Pneumatic Rivet Set | 1 | |
| 287851-1 | Pneumatic Rivet Set | 1 | |
| 287855-1 | Pneumatic Rivet Set | 1 | |
| 287864-1 | Pneumatic Rivet Set | 1 | |
| 287865-1 | RIVET SET PNEUMATIC TOOL | 1 | |
| 287866-1 | Pneumatic Rivet Set | 1 | |
| 287867-1 | Pneumatic Rivet Set | 1 | |
| 289134-1 | INDICATOR BUTTERFLY ANGLE PNEUMATIC VALVE | 1 | |
| 289142-1 | PNEUMATIC RIVET SET TOOL | 1 | |
| 289174-1 | RIVET SET PNEUMATIC TOOL | 1 | |
| 289217-1 | Pneumatic Rivet Set | 1 | |
| 289227-1 | RIVET SET, PNEUMATIC TOOL | 2 | |
| 289229-2 | PNEUMATIC DRIVE ACTUATOR TEST STAND | 1 | |
| 289235-1 | PNEUMATIC RIVET SET TOOL | 2 | |
| 289260-1 | RIVET SET PNEUMATIC TOOL | 1 | |
| 289261-1 | RIVET SET PNEUMATIC TOOL | 1 | |
| 289351-2 | RIVET SET PNEUMATIC TOOL | 1 | |
| 289356-1 | RIVET SET PNEUMATIC TOOL | 1 | |
| 289357-1 | RIVET SET PNEUMATIC TOOL | 1 | |
| 289393-1 | RIVET SET PNEUMATIC SET TOOL | 1 | |
| 289433-1 | Pneumatic Tool Rivet Set | 1 | |
| 289435-1 | Pneumatic Tool Rivet Set | 1 | |
| 289436-1 | Pneumatic Tool Rivet Set | 1 | |
| 289437-1 | PNEUMATIC TOTAL | 1 | |
| 289438-1 | Pneumatic Tool Rivet Set | 1 | |
| 2894434-1 | Pneumatic Tool Rivet Set | 1 | |
| 289452-1 | TOOTH BEARING PNEUMAT | 1 | |
| 289520-1 | RIVET SET PNEUMATIC FIXTURE | 1 | |
| 290121-1 | PNEUMATIC TEST SET | 1 | |
| 290121-3 | ENGINE PNEUMATIC TEST KIT | 1 | |
| 290121-3-1 | PNEUMATIC TEST SET | 1 | |
| 290121-4 | BANCO PRUEBAS ITCAN NEUMÁTICAS ( KIT 302 ) | 2 | |
| 290395-1-1 | ADAPTER - PNEUMATIC VALVE TESTER (HONEYWELL INTERNATIONAL INC, ENGINE & SYSTEMS) | 1 | |
| 290406-1-1 | CABLE, ELECTRICAL - PNEUMATIC VALVE TESTER (HONEYWELL (FORMERLY ALLIEDSIGNAL) AEROSPACE) | 1 | |
| 290416-2 | APU PNEUMATIC TESTER | 1 | |
| 290435-1-1 | ADAPTER, PNEUMATIC, VALVE TEST A330 | 5 | |
| 290437-1 | SET-PNEUMATIC TOOL RIVET SPSD BY 293637-1 | 1 | |
| 293-230-30 | Mitutoyo 293-230-30 Digimatic Coolant Proof Micrometer 0-25mm | 1 | |
| 293-231-30 | Mitutoyo 293-231-30 Digimatic Coolant Proof Micrometer 25-50mm | 1 | |
| 293-232-30 | Mitutoyo 293-232-30 Digimatic Coolant Proof Micrometer 50-75mm | 1 | |
| 293-233-30 | Mitutoyo 293-233-30 Digimatic Coolant Proof Micrometer 75-100mm | 1 | |
| 293-250-10 | Mitutoyo 293-250-10 Digimatic Coolant Proof Micrometer 100-125mm | 1 | |
| 293-251-10 | Mitutoyo 293-251-10 Digimatic Coolant Proof Micrometer 125-150mm | 1 | |
| 293-252-10 | Mitutoyo 293-252-10 Digimatic Coolant Proof Micrometer 150-175mm | 1 | |
| 293-253-10 | Mitutoyo 293-253-10 Digimatic Coolant Proof Micrometer 175-200mm | 1 | |
| 293-254-10 | Mitutoyo 293-254-10 Digimatic Coolant Proof Micrometer 200-225mm | 1 | |
| 293-255-10 | Mitutoyo 293-255-10 Digimatic Coolant Proof Micrometer 225-250mm | 1 | |
| 293-256-10 | Mitutoyo 293-256-10 Digimatic Coolant Proof Micrometer 250-275mm | 1 | |
| 293-257-10 | Mitutoyo 293-257-10 Digimatic Coolant Proof Micrometer 275-300mm | 1 | |
| 293-330-30 | Mitutoyo 293-330-30 Digimatic Coolant Proof Micrometer 0-25mm / 0-1" | 1 | |
| 293-331-30 | Mitutoyo 293-331-30 Digimatic Coolant Proof Micrometer 25-50mm / 1-2" | 1 | |
| 293-332-30 | Mitutoyo 293-332-30 Digimatic Coolant Proof Micrometer 50-75mm / 2-3" | 1 | |
| 293-333-30 | Mitutoyo 293-333-30 Digimatic Coolant Proof Micrometer 75-100mm / 3-4" | 1 | |
| 293-334-30 | Mitutoyo 293-334-30 Digimatic Coolant Proof Micrometer 0-25mm / 0-1" | 1 | |
| 293-340-30 | Mitutoyo 293-340-30 Digimatic Coolant Proof Micrometer 0-25mm / 0-1" | 2 | |
| 293-341-30 | Mitutoyo 293-341-30 Digimatic Coolant Proof Micrometer 25-50mm / 1-2" | 1 | |
| 293-342-30 | Mitutoyo 293-342-30 Digimatic Coolant Proof Micrometer 50-75mm / 2-3" | 1 | |
| 293-343-30 | Mitutoyo 293-343-30 Digimatic Coolant Proof Micrometer 75-100mm / 3-4" | 1 | |
| 293-344-30 | Mitutoyo 293-344-30 Digimatic Coolant Proof Micrometer 0-25mm / 0-1" | 1 | |
| 293-345-30 | Mitutoyo 293-345-30 Digimatic Coolant Proof Micrometer 25-50mm / 1-2" | 1 | |
| 293-346-30 | Mitutoyo 293-346-30 Digimatic Coolant Proof Micrometer 50-75mm / 2-3" | 1 | |
| 293-347-30 | Mitutoyo 293-347-30 Digimatic Coolant Proof Micrometer 75-100mm / 3-4" | 1 | |
| 293-348-30 | Mitutoyo 293-348-30 Digimatic Coolant Proof Micrometer 0-25mm / 0-1" | 1 | |
| 293-350-10 | Mitutoyo 293-350-10 Digimatic Coolant Proof Micrometer 100-125mm / 4-5" | 1 | |
| 293-351-10 | Mitutoyo 293-351-10 Digimatic Coolant Proof Micrometer 125-150mm / 5-6" | 1 | |
| 293-352-10 | Mitutoyo 293-352-10 Digimatic Coolant Proof Micrometer 150-175mm / 6-7" | 1 | |
| 293-353-10 | Mitutoyo 293-353-10 Digimatic Coolant Proof Micrometer 175-200mm / 7-8" | 1 | |
| 293-354-10 | Mitutoyo 293-354-10 Digimatic Coolant Proof Micrometer 200-225mm / 8-9" | 1 | |
| 293-355-10 | Mitutoyo 293-355-10 Digimatic Coolant Proof Micrometer 225-250mm / 9-10" | 1 | |
| 293-356-10 | Mitutoyo 293-356-10 Digimatic Coolant Proof Micrometer 250-275mm / 10-11" | 1 | |
| 293-357-10 | Mitutoyo 293-357-10 Digimatic Coolant Proof Micrometer 275-300mm / 11-12" | 1 | |
| 293-705 | DIGIMATIC MICROMETER (FRICTION TYPE) | 1 | |
| 293-961-30 | MITUTOYO 293-961-30 IP65 DIGIMATIC MICROMETER SET 0-100MM (0-4″) | 2 | |
| 293137-1 | Air Gap Armature Gage | 1 | |
| 293637-1 | Pneumatic Tool Rivet Set | 1 | |
| 294883-1 | SHAFT STRETCHING FIXTURE (TO APPLY APPROXIMATELY 23,000 POUND LOAD OR 4868 PSIG (33564 KPA) TO 3822077-1 TIE SHAFT) | 1 | |
| 294I6856 | BATIFLEX AVR 135G FLOOR MAT - BAC 7807 GRAY 6856 MINNEAPOLIS (SL: 9 MOS) ROLLS SIZE 1.5 X 5.5 | 1 | |
| 296039-1 | PNEUMATIC TOOL | 1 | |
| 296107-1 | PNEUMATIC TOOL | 1 | |
| 296108-1 | PNEUMATIC TOOL | 1 | |
| 296109-1 | PNEUMATIC TOOL | 1 | |
| 296324-1 | Pneumatic Drive Rivet Set Fixture | 1 | |
| 296383-1 | PNEUMATIC TOOL | 1 | |
| 296383-1 | PNEUMATIC TOOL RIVET SET | 1 | |
| 296707-1 | PNEUMATIC RIVET SET TOOL | 1 | |
| 296710-1 | ADAPTER KIT PNEUMATIC ACTUATOR | 1 | |
| 29A028 | AIRBUS REFERENCE STANDARD 51-63-01 PT 6 FIG 601. MATERIAL: 4340 STEEL. 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05-0.25mm WIDE). Includes Test Report and Certificate of Conformance..... | 4 | |
| 29A032 | AIRBUS REFERENCE STANDARD 51-63-01 PT 6 FIG 601, MATERIAL: 6AL-4V TITANIUM, 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05-0.25mm WIDE). Includes Test Report and Certificate of Conformance. | 3 | |
| 2C14137G02 | PULLER MATING RING | 8 | |
| 2C14138G02 | PUSHER (INSTALLER MATING RING) | 14 | |
| 2C14228P01 | Pneumatic Thrust Reverser deployment test hose | 4 | |
| 2C5088G01 | KIT, PNEUMATIC WRENCH | 1 | |
| 2C5661G01 | WRENCH - PNEUMATIC | 1 | |
| 2C6618 | PULLER FOR MATING SEAL REMOVAL GEARBOX | 1 | |
| 2C6639 | PULLER,FILTER,PNEUMATIC DRIVE MOTOR | 1 | |
| 2C6639-01-A | FILTER PULLER PNEUMATIC | 1 | |
| 2C6639G03 | PULLER FILTER PNEUMATIC DRIVE MOTOR | 4 | |
| 2C81079 | CABLE, POWER SUPPLY TO FADEC - PMAT 2000 (115 VAC) | 1 | |
| 2C81079G01 | CABLE POWER SUPPLY TO FADEC - PMAT 2000 (110V) | 1 | |
| 2C81079G02 | CABLE POWER SUPPLY TO FADEC - PMAT 2000 (220V) | 1 | |
| 2C81945G01 | SET, MATE RING PULLER (BOX 1) | 2 | |
| 2C81950 | SET PULLERS - MATING RINGS - AGB | 1 | |
| 2C81950G01 | Set − Puller (mating rings AGB) | 3 | |
| 2C81956 | PUSHER SET - I MATING RINGS | 1 | |
| 2C81956G01 | PUSHER SET - I MATING RINGS | 2 | |
| 2C90851G01 | SEAL MATING RING PULLER | 1 | |
| 2C91182G01 | ADAPTER-PNEUMATIC | 1 | |
| 2C914269G01 | PULLER - MATING RING | 1 | |
| 2C91426G01 | PULLER, MATING RING, AXIS L | 1 | |
| 2K-GE-02 | PMAT 2000 KIT GEAE CF-34 | 1 | |
| 2L1380 | DRILL,PNEUMATIC,POR | 1 | |
| 2LBMHC | ANTI STATIC BENCH TOP MAT | 1 | |
| 2TE651307917 | APU PNEUMATIC TESTER | 1 | |
| 2TE65B07917 | TEST DUCT - APU PNEUMATIC DUCT INSTALLATION STA. 1250, LBL 16, WL 115 | 11 | |
| 3.66242E 12 | PNEUMATIC GUN 1600NM 1/2 | 1 | |
| 30-2084-SD-02L | DIGITAL TEST GAUGE BODY MAT. 316 S.S CONNECTION 1/4" NPT, DIA. 3 INCH EXIA INTRINSICALLY SAFE IP65 TYPE: 30-2084-SD-02L 1 BARA | 1 | |
| 30-300 | PlewsLubrimatic 30-300 Standard Duty Pistol Grease Gun | 1 | |
| 30-804-2114 | Sylvac 30-804-2114 M-Bus 4D Digimatic Multiplexer Unit | 1 | |
| 30-804-2118 | Sylvac 30-804-2118 M-Bus 8D Digimatic Multiplexer Unit | 1 | |
| 3000A 1-1/2" | Pneumatic Rivetting Tool | 1 | |
| 3000A-1-1/2 | General Pneumatic Single Cylinder "Alligator" Squeezer with 1-1/2 Reach Jaws (MADE IN USA!) | 1 | |
| 3000A-2-1/4 | General Pneumatic Single Cylinder "Alligator" Squeezer with 2" Reach Jaws (MADE IN USA!) | 1 | |
| 3000A-3 | General Pneumatic Single Cylinder "Alligator" Squeezer with 3" Reach Jaws (MADE IN USA!) | 1 | |
| 3000C-2 | General Pneumatic "C" Squeeze with 2" Reach Yoke (MADE IN THE USA!) | 1 | |
| 3000C-3 | General Pneumatic "C" Squeeze with 3" Reach Yoke (MADE IN THE USA!) | 1 | |
| 3001S030 | PNEUMATIC DE-ICER TESTING CONSOLE | 1 | |
| 3001S031 | PNEUMATIC DE-ICER TESTING CONSOLE (PRESSURE BAR, TEMO F) | 1 | |
| 300B | CRIMP TOOL, PNEUMATIC | 1 | |
| 301SS | BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-70-001. ALSO IN 53-10-01 PART 6 PAGE 5 FIGURE 1. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL: 301 STAINLESS . SIZE: 1.5"W x 3.75"L x .25" | 1 | |
| 3047 | RIVETER, PNEUMATIC | 4 | |
| 308-24-1 | PNEUMATIC DIE GRINDER | 1 | |
| 309/3 | PNEUMATIC SCRAPER SHARPENER | 1 | |
| 3125 | PNEUMATIC SANDER, 1.25 INCH DIAMETER, NON-ORBITAL | 1 | |
| 314979-1 | CRIMP TOOL - POWER, PNEUMATIC | 6 | |
| 3171626-3 | SWITCH PRESSURE PNEUMATIC | 1 | |
| 317875-20 | 20 FOOT HOSE FOR LUBRICATION UNIT, MOBILE, PNEUMATIC POWERED (ALEMITE CORP) | 1 | |
| 31A008 | AIRBUS REFERENCE STANDARD 51-63-01 PT 6 FIG 601. MATERIAL: 4340 STEEL. 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05-0.25mm WIDE). Includes Test Report and Certificate of Conformance... | 1 | |
| 3210500-0501 | PNEUMATIC VALVE TEST STAND (110 VAC) | 1 | |
| 3210500-0502 | PNEUMATIC VALVE TEST STAND (220 VAC) | 1 | |
| 329-351-30 | DIGIMATIC DEPTH MICROMETER, INCH | 1 | |
| 32P15822-1 | CENTRAL WING LEFT (PNEUMATIC DE-ICER BOO | 1 | |
| 32P15822-2 | CENTRAL WING RIGHT (PNEUMATIC DE-ICER BO | 1 | |
| 331-351 | Mitutoyo 331-351 Digimatic Spline Micrometer 0-25mm / 0-1" | 1 | |
| 331-352 | Mitutoyo 331-352 Digimatic Spline Micrometer 25-50mm / 1-2" | 1 | |
| 331-353 | Mitutoyo 331-353 Digimatic Spline Micrometer 50-75mm / 2-3" | 1 | |
| 331-354 | Mitutoyo 331-354 Digimatic Spline Micrometer 75-100mm / 3-4" | 1 | |
| 331-361 | Mitutoyo 331-361 Digimatic Spline Micrometer 0-25mm /0-1" | 1 | |
| 331-362 | Mitutoyo 331-362 Digimatic Spline Micrometer 25-50mm /1-2" | 1 | |
| 331-363 | Mitutoyo 331-363 Digimatic Spline Micrometer 50-75mm /2-3" | 1 | |
| 331-364 | Mitutoyo 331-364 Digimatic Spline Micrometer 75-100mm /3-4" | 1 | |
| 3320A96900-301 | CONAIR EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .004" W ± .001"), . MATERIAL 7075-T6 ALUMINUM. SIZE: 1.5"W x 3.00"L x .25" ± .005". Includes Test Report and Certificate of Conformance. | 1 | |
| 3320A96900-303 | CONAIR EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .004" W ± .001"), . MATERIAL 7050-T7451 ALUMINUM. SIZE: 1.5"W x 3.00"L x .25" ± .005". Includes Test Report and Certificate of Conformance. | 1 | |
| 3320A96900-305 | CONAIR EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .004" W ± .001"), . MATERIAL 15-5PH Steel. SIZE: 1.5"W x 3.00"L x .25" ± .005". Includes Test Report and Certificate of Conformance. | 1 | |
| 3320A96900-307 | CONAIR EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .004" W ± .001"), . MATERIAL 6Al-4v Titaniuml. SIZE: 1.5"W x 3.00"L x .25" ± .005". Includes Test Report and Certificate of Conformance. | 1 | |
| 332A97900000 | TEST SET, PNEUMATIC SYSTEM COMPONENTS | 1 | |
| 332A97900100 | TEST SET,PNEUMATIC SYSTEM COMPONENTS | 2 | |
| 33872 | Pneumatic tools set | 1 | |
| 338A | BOEING REFERENCE STANDARD 737 PART 6 53-10-35 FIGURE 1 PAGE 6. MATERIAL: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 338B | BOEING REFERENCE STANDARD 737 PART 6 53-10-35 FIGURE 1 PAGE 6. MATERIAL: 301 1/2 HARD. Includes Test Report and Certificate of Conformance. | 1 | |
| 33W506 | REPAIR TOOL,PNEUMAT | 1 | |
| 34-214A-1-1/2 | RIVETER,YOKE,PNEUMATIC | 1 | |
| 34-540 | SCREW BUSTER 3/8" PNEUMATIC DRIVEN | 1 | |
| 3400MCS | POP RIVET GUN PNEUMATIC MODEL 3400 / EMHART | 1 | |
| 3402810-1 | LINE ANALYZER, AUTOMATIC PILOT | 1 | |
| 3403248-1 | TEST SET PNEUMATIC | 1 | |
| 3404068-1 | PNEUMATIC DEICER BOOT TOOL KIT | 1 | |
| 342-271 | Mitutoyo 342-271 Digimatic Crimp Height Micrometer 0-20mm | 1 | |
| 342-351 | Mitutoyo 342-351 Digimatic Point Micrometer 0-25mm / 0-1" 15 degree tip | 2 | |
| 342-352 | Mitutoyo 342-352 Digimatic Point Micrometer 25-50mm / 1-2" 15 degree tip | 1 | |
| 342-353 | Mitutoyo 342-353 Digimatic Point Micrometer 50-75mm / 2-3" 15 degree tip | 1 | |
| 342-354 | Mitutoyo 342-354 Digimatic Point Micrometer 75-100mm / 3-4" 15 degree tip | 1 | |
| 342-361-30 | Mitutoyo 342-361-30 Digimatic Point Micrometer 0-25mm / 0-1" 30 degree tip | 1 | |
| 342-362 | Mitutoyo 342-362 Digimatic Point Micrometer 25-50mm / 1-2" 30 degree tip | 1 | |
| 342-363 | Mitutoyo 342-363 Digimatic Point Micrometer 50-75mm / 2-3" 30 degree tip | 1 | |
| 342-364 | Mitutoyo 342-364 Digimatic Point Micrometer 75-100mm / 3-4" 30 degree tip | 1 | |
| 342-371-30 | Mitutoyo 0-.800" IP65 Digimatic Crimp Height Micrometer W/ Data Output | 3 | |
| 342-741(CPM30) | DIGIMATIC POINT MICROMETER | 1 | |
| 342-741-10 | DIGIMATIC POINT MICROMETER | 1 | |
| 342286-13H | MATE DOLLY, AFT CARGO DOOR/RAMP | 1 | |
| 343 | PNEUMATIC TEST KIT | 8 | |
| 343-350 | Mitutoyo 343-350 Digimatic Caliper Jaw Micrometer 0-25mm / 0-1" | 1 | |
| 343L0ANER | TEST KIT: PNEUMATIC, CUSTOMER LONER UNIT | 1 | |
| 344 | TEST KIT: PNEUMATIC, | 1 | |
| 345-350-10 | Mitutoyo 345-350-10 Digimatic Inside Caliper Micrometer 5-30mm /.2-1.2" | 1 | |
| 345-711 | DIGIMATIC INSIDE MICROMETER-CALIPER TYPE | 1 | |
| 347-1100-3GSE | PROTECTIVE ENGINE IN-LET MAT | 1 | |
| 34RAA28AH3 | NUTRUNNER - ANGLE, PNEUMATIC DRIVE | 2 | |
| 34RAA75AZ4 | NUTRUNNER - ANGLE, PNEUMATIC DRIVE (REVERSIBLE) | 2 | |
| 350A93-3722-01 | MATND RTL SUP EXCHANGE TOOL | 1 | |
| 350A96-3705-03 | OBT DE MAT EQUIPE | 1 | |
| 353 | PNEUMATIC INSTALLATION TOOL | 4 | |
| 3533-25A | MITUTOYO331-351DIGIMATICSPLINEMICROMETER0-25M | 1 | |
| 354422-1 | PNEUMATIC HEAD ASSY-CES | 1 | |
| 35570 | PNEUMATIC CHISEL SDS-PLUS X 500 MM NON SPARKING Cu-Be | 1 | |
| 35571 | PNEUMATIC CHISEL SDS-PLUS X 500 MM NON SPARKING Al-Bron | 1 | |
| 35572 | PNEUMATIC CHISEL SDS-PLUS X 125 MM NON SPARKING Cu-Be | 1 | |
| 35573 | PNEUMATIC CHISEL SDS-PLUS X 125 MM NON SPARKING Al-Bron | 1 | |
| 35574 | PNEUMATIC CHISEL SDS-PLUS X 175 MM NON SPARKING Cu-Be | 1 | |
| 35575 | PNEUMATIC CHISEL SDS-PLUS X 175 MM NON SPARKING Al-Bron | 1 | |
| 35576 | PNEUMATIC CHISEL SDS-PLUS X 125 MM NON SPARKING Cu-Be | 1 | |
| 35577 | PNEUMATIC CHISEL SDS-PLUS X 125 MM NON SPARKING Al-Bron | 1 | |
| 35578 | PNEUMATIC CHISEL SDS-PLUS X 175 MM NON SPARKING Cu-Be | 1 | |
| 35579 | PNEUMATIC CHISEL SDS-PLUS X 175 MM NON SPARKING Al-Bron | 1 | |
| 35580 | PNEUMATIC CHISEL SDS-PLUS X 125 MM NON SPARKING Cu-Be | 3 | |
| 35581 | PNEUMATIC CHISEL SDS-PLUS X 125 MM NON SPARKING Al-Bron | 1 | |
| 35582 | PNEUMATIC CHISEL SDS-PLUS X 175 MM NON SPARKING Cu-Be | 1 | |
| 35583 | PNEUMATIC CHISEL SDS-PLUS X 175 MM NON SPARKING Al-Bron | 1 | |
| 35584 | PNEUMATIC CHISEL SDS-PLUS X 125 MM NON SPARKING Cu-Be | 1 | |
| 35585 | PNEUMATIC CHISEL SDS-PLUS X 125 MM NON SPARKING Al-Bron | 1 | |
| 35586 | PNEUMATIC CHISEL SDS-PLUS X 175 MM NON SPARKING Cu-Be | 1 | |
| 35587 | PNEUMATIC CHISEL SDS-PLUS X 175 MM NON SPARKING Al-Bron | 1 | |
| 355A91-3241-00 | CONSTRUCTION SLING MAT MRP | 1 | |
| 357-7351-010 | GPS Antenna mating connector | 1 | |
| 35790 | PNEUMATIC CHISEL SW22 X 82.5 NON SPARKING Cu-Be | 1 | |
| 35791 | PNEUMATIC CHISEL SW22 X 82.5 NON SPARKING Al-Bron | 1 | |
| 35796 | PNEUMATIC CHISEL 22 X 82,5 (Z: 150 MM) NON SPARKING Al-Bron | 1 | |
| 35801 | PNEUMATIC CHISEL 22 X 82,5 (Z: 150 MM) NON SPARKING Cu-Be | 1 | |
| 35RNAL-104M | NUTRUNNER - ANGLE, PNEUMATIC DRIVE (190-400 LBS.IN) | 1 | |
| 36-01-000 | PNEUMATIC SYS. TESTER | 1 | |
| 36-3131-01 | AUTOMATIC TEST TAPE AND TEST PROCEDURE | 1 | |
| 36-3131-03 | AUTOMATIC TEST PROCEDURE | 1 | |
| 36-3131-11 | AUTOMATIC TEST PROCEDURES | 1 | |
| 36-3214-02 | AUTOMATIC TEST PROCEDURE | 1 | |
| 36-3421-01 | AUTOMATIC TEST PROCE- DURES | 1 | |
| 3616297-1 | BOEING REFERENCE STANDARD 737 PART 4 57-10-20 PAGE 7 FIGURE 2 . MATERIAL: 6AL-4V TITANIUM. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| 36346 | WIDE PNEUMATIC CHISEL 75 MM X 355 MM X SHANK (HEX 22 X82.5 MM) NON SPARKING Cu-Be | 1 | |
| 36347 | WIDE PNEUMATIC CHISEL 75 MM X 355 MM X SHANK (HEX 22 X82.5 MM) NON SPARKING Al-Bron | 1 | |
| 36597 | PNEUMATIC CHISEL HEX. 24 X 150 X 350 MM NON SPARKING Cu-Be | 1 | |
| 36599 | PNEUMATIC CHISEL HEX. 24 X 150 X 350 MM NON SPARKING Al-Bron | 1 | |
| 36759 | PNEUMATIC TESTER FOR INSULATING GLOVES | 1 | |
| 368-996 | DIGIMATIC HOLTEST THREE POINT INTERNAL MICROMETER (0,8-2") | 2 | |
| 36808 | PNEUMATIC DRILL 13 MM - AQUAMaster- MasterEx 36808 - II 2G Ex IIB T5 | 1 | |
| 36809 | PNEUMATIC SABRE SAW MasterEX 36809 II 2G Ex IIB T5 | 1 | |
| 36810 | QUICK CHANGE CHUCK FOR PNEUMATIC SAW SAW MasterEx | 1 | |
| 36857-01 | MATING CONNECTOR FOR: 36728-01, DPB153 OUTLRT ASSY | 4 | |
| 369-350 | Mitutoyo 369-350 Digimatic Non-Rotating Spindle Disc Micrometer 0-25mm / 0-1" | 1 | |
| 369-351 | Mitutoyo 369-351 Digimatic Non-Rotating Spindle Disc Micrometer 25-50mm / 1-2" | 1 | |
| 369-352 | Mitutoyo 369-352 Digimatic Non-Rotating Spindle Disc Micrometer 50-75mm / 2-3" | 1 | |
| 369-353 | Mitutoyo 369-353 Digimatic Non-Rotating Spindle Disc Micrometer 75-100mm / 3-4" | 1 | |
| 36958 | FLAT PNEUMATIC CHISEL 19 X 330 MM NON SPARKING Cu-Be | 1 | |
| 36959 | FLAT PNEUMATIC CHISEL 19 X 330 MM NON SPARKING Al-Bron | 1 | |
| 377-431U | SCREWDRIVER PNEUMATI | 1 | |
| 377-841U | Nutrunner - Angle, Pneumatic Drive, Reversible (me | 1 | |
| 379100D | NUTRUNNER - ANGLE, PNEUMATIC DRIVE (120-252 IN-LBS) | 1 | |
| 3791012-1 | PNEUMATIC TOOL RIVET SET | 1 | |
| 3791129-1 | RIVETING PNEUMATIC HYDRAULIC FIXTURE | 1 | |
| 3791271-1 | PNEUMATIC TOOL RIVET SET | 1 | |
| 3792195-1 | TEST SET – PNEUMATIC VALVE ACTUATING ( IT-CAN ) | 9 | |
| 38-3131-03 | AUTOMATIC TEST TAPE | 1 | |
| 38-3131-11 | AUTOMATIC TEST TAPE | 1 | |
| 38-3214-02 | AUTOMATIC TEST TAPE | 1 | |
| 38-3421-01 | AUTOMATIC TEST TAPE | 1 | |
| 39-214C | PNEUMATIC RIVET SQUEEZER | 1 | |
| 39-520CTK | Portable Pneumatic Swaged Terminal Pull Tester Kit (Description: Rebuilt Kit*) (Add to cart: Contact us to order) | 1 | |
| 39-520JK | Portable Pneumatic Cable Terminal Swager Kit (Description: Rebuilt Kit*) (Add to cart: Add To Cart) | 1 | |
| 3903-04544 | SYNFLEX PNEUMATIC CONNECTOR PART # 3903-04544 (FOR PITOT) | 1 | |
| 3903-04546 | SYNFLEX PNEUMATIC CONNECTOR PART # 3903-04546 (FOR STATIC) | 1 | |
| 396037E | NUTRUNNER - ANGLE, PNEUMATIC DRIVE (120-252 IN-LBS) | 1 | |
| 3AC37 | PLACARD, NFPA, HAZARDOUS INFORMATION PLACARD, SIZE | 1 | |
| 3G0037 | PNEUMATIC BENCH VISE | 1 | |
| 3G0096 | PNEUMATIC BELT VISE | 1 | |
| 3G58634 | PNEUMATIC CYLINDER FLOOR VISE | 2 | |
| 3G6305G24131 | TOOL KIT, INPUT PINION MATING RING REPL | 1 | |
| 3G6305G25131 | TOOL KIT INPUT PINION MATING RING | 1 | |
| 3ZH07 | PRECISION KNIFE, 1/4 IN HANDLE DIAMETER, ALUMINUM HANDLE MAT | 1 | |
| 4-10XHU6-SS MS33514 | ADAPTER - PNEUMATIC PRESSURE (7/8 INCH) | 1 | |
| 4-71 | TRENT 700 (OMAT 4-71) RAPID RELUBRICATION SYSTEM | 5 | |
| 4-8XHU6-SS MS33514 | ADAPTER - PNEUMATIC PRESSURE (3/4 INCH) | 1 | |
| 4/8/1945 | B737 PNEUMATIC TEST KIT | 1 | |
| 400 | DUAL ACTION PNEUMATIC SANDERS ORBITAL ACTION WT=4LBS 7OZS. | 4 | |
| 400-BEC | PNEUMATIC CRIMP TOOL | 1 | |
| 400611E | NUTRUNNER - ANGLE, PNEUMATIC DRIVE (120-252 IN-LBS) | 1 | |
| 400B | 400 SERIES PNEUMATIC CRIMPING TOOL | 1 | |
| 400B1 | PNEUMATIC CRIMP TOOL | 2 | |
| 4027560-9000 | AUTOMATIC TEST EQUIPMENT | 1 | |
| 4028 | BOEING REFERENCE STANDARD 747 PART 4 57-40-03 FIGURE 3 PAGE 6.MATERIAL: 4340 STEEL. Includes Test Report and Certificate of Conformance. | 4 | |
| 4028G | BOEING TRANSDUCER GUIDE 747 57-40-03 FIGURE 2 PAGE 5. MATERIAL: LUCITE. Includes Certificate of Conformance. | 1 | |
| 4028P | BOEING TRANSDUCER POSITIONER 747 57-40-03 FIGURE 1 PAGE 4A. MATERIAL: ALUMINUM. Includes Certificate of Conformance. | 1 | |
| 4029 | BOEING REFERENCE STANDARD 747 PART 4 55-50-01 FIGURE 1 PAGE 4.MATERIAL: 2024-T3 or 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 40320 | TAPMATIC (1/12) | 2 | |
| 4034-501 | PANEL, POWER DISTRIBUTION, 25KW MUST BE THE MILITARY SPEC ONE MATCHED WITH NSN ATTACHED. | 1 | |
| 403475-011 | EQUIPMENT FOR REMOVING/LOADING INFORMATION FROM THE ENGINE (PMAT) | 1 | |
| 4036 | BOEING REFERENCE STANDARD 747 PART 4 57-40-05 FIGURE 3 PAGE 6.MATERIAL: 4340 STEEL. Includes Test Report and Certificate of Conformance. | 7 | |
| 4036800-905 | AUTOMATIC TEST EQUIPMENT | 1 | |
| 4036800-9800 | AUTOMATIC TEST EQUIPMENT | 1 | |
| 4036G | BOEING TRANSDUCER GUIDE 747 PART 4 57-40-05 FIGURE 2 PAGE 4.MATERIAL: LUCITE ( CAST ACRYLIC ). Includes Certificate of Conformance. | 1 | |
| 4072 | BOEING REFERENCE STANDARD 747 PT 6 53-30-05. Material 2024-T3 Aluminum. Fasteners BACR15CE5D5, BACR15CE6D5. Includes Test Report and Certificate of Conformance. | 1 | |
| 62530 | DIAGONAL CUTTING TRIANG. ELECT. PLIER 115 MM (4") BLACK CHROME PLATING BIMAT. | 1 | |
| 144798 | MSP812M Automation Screw Presenter | 1 | |
| 173784 | ADAPTER - OXYGEN CHARGING (1/4 JIC FLARE, MATES WITH 10089-3 3/8-24 UNF-2B) | 19 | |
| 218315 | Henkel 983437 LOCTITE 11 & 21 200 mL Dual Cartridge Pneumatic Applicator | 1 | |
| 219070 | BELZER "9'' WIRE TWISTING PLIERS WITH AUTOMATIC RETURN – MODEL 1761 | 1 | |
| 221269 | PPG Semco 221269 Model 388 Automatic SEMKIT Sealant Package Mixer | 3 | |
| 221415 | PPG Semco 221415 Model 388 Duramatic #U-10 Valve | 1 | |
| 223912 | AUTOMATIC BOLT HOLE PROBES | 1 | |
| 223932 | AUTOMATIC BOLT HOLE PROBES | 1 | |
| 223964 | AUTOMATIC BOLT HOLE PROBES | 1 | |
| 229340 | PORTABLE SEMI AUTOMATIC MIXER BLACK COLOR | 4 | |
| 230323 | PPG Semco Model 388 ElectricPneumatic 110 Gallon SEMKIT Sealant Package Mixer | 1 | |
| 231145 | PPG Semco Model 388 ElectricPneumatic 20 oz SEMKIT Sealant Package Mixer | 1 | |
| 232410 | PPG Semco Model 388 ElectricPneumatic 1 oz SEMKIT Sealant Package Mixer | 1 | |
| 232523 | PPG Semco 232523 Model 388-P Pneumatic SEMKIT Sealant Package Mixer | 2 | |
| 233500 | PPG Semco Model 285P Pneumatic Portable SEMKIT Sealant Package Mixer | 1 | |
| 234557 | PNEUMATIC ANGLE GRINDER | 1 | |
| 235502 | CASA CN-235 EDDY CURRENT REFERENCE STANDARD PART 5 57-10-05 PAGE 510 FIGURE 504b. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| 238562 | FILTER 100 MESH MATERIAL IN THE GUN (3 PIECES INCLUDED) | 1 | |
| 250000 | PPG Semco 250000 Model 250-A (no Retainer) Pneumatic Sealant Gun w Handle (less Hose) | 3 | |
| 250015 | PPG Semco 250015 Model 250-A1 32cc (1 oz) Pneumatic Sealant Gun Assembly w Handle (less Hose) | 1 | |
| 250060 | PPG Semco 250060 Model 250-A6 156 cc (6 oz) Pneumatic Sealant Gun Assembly wo Handle (less Hose) | 2 | |
| 250065 | PNEUMATIC SEMKIT GUN 250-A | 6 | |
| 250080 | PPG Semco 250080 Model 250-A8 214 cc (8 oz) Pneumatic Sealant Gun Assembly wo Handle (less Hose) | 1 | |
| 250085 | PPG Semco 250085 Model 250-A8 214 cc (8 oz) Pneumatic Sealant Gun Assembly w Handle (less Hose) | 1 | |
| 250125 | PPG Semco 250125 Model 250-A12 310 cc (12 oz) Pneumatic Sealant Gun Assembly w Handle (less Hose) | 1 | |
| 250250 | PPG Semco 250250 Model 250-A2.5 59 cc (2.5 oz) Pneumatic Sealant Gun Assembly wo Handle (less Hose) | 2 | |
| 250255 | PPG Semco 250255 Model 250-A2.5 59 cc (2.5 oz) Pneumatic Sealant Gun Assembly w Handle (less Hose) | 2 | |
| 260112 | Easy Push Pneumatic Kit (PF-19.8 lbs for EZ-25) | 1 | |
| 260199 | Servo-Assisted Pneumatic Kit (EZ-12) | 1 | |
| 260200 | Servo-Assisted Pneumatic Kit (EZ-25) | 1 | |
| 260204 | Easy Push Pneumatic Kit (PF-11 lbs for EZ-12) | 1 | |
| 260205 | Easy Push Pneumatic Kit (PF-19.8 lbs for EZ-40&100) | 1 | |
| 260206 | Easy Push Pneumatic Kit (PF-33 lbs for EZ-40&100) | 1 | |
| 260207 | Easy Push Pneumatic Kit (PF-55 lbs for EZ-100) | 1 | |
| 260208 | Servo-Assisted Pneumatic Kit (EZ-40 & EZ-100) | 1 | |
| 281160 | PNEUMATIC, VALVE TEST | 1 | |
| 287847 | RIVET MACHINE PNEUMATIC | 1 | |
| 289200 | WORK MAT - PROTECTIVE SPL-6376 | 1 | |
| 289235 | RIVET-SET PNEUMATIC | 1 | |
| 290121 | TESTSET - PNEUMATIC ITCAN - DC9/MD80 | 1 | |
| 293137 | GAGE ARMATURE AIR GAP | 1 | |
| 301256 | JUEGO LIMA MATRICERAS 06 PIEZAS | 1 | |
| 373923 | SPRING FOR DESOUTTER PNEUMATIC SCREWDRIVER HEAD | 1 | |
| 387011 | SIMMONDS BRIDGE AUTOMATIC CAPACITANCE | 1 | |
| 400685 | PNEUMATIC CLECO RUNNER WITH GUIDE BUSHING | 1 | |
| 403475 | PMAT-2000 ADAPTER CABLE: PN° 704-2619-001 | 2 | |
| 403561 | PMAT-2000 ADAPTER CABLE: PN° 704-2619-001 | 2 | |
| 1465084 | DRILL-PISTOL,PNEUMATIC 1.0 HP,1300 RPM | 1 | |
| 1900607 | MATING RING BULLET PUSHER | 1 | |
| 1901110 | EDP MATING RING EXTRACTOR | 1 | |
| 2000905 | 2-Bottle hand-movable aircraft nitrogen service cart. Retractable casters & pneumatic tires. For remote (ramp) or in-hangar use, complete with booster and regulator system. | 1 | |
| 2000906 | 2-Bottle hand-movable aircraft oxygen service cart. Retractable casters & pneumatic tires. For in-hangar use (uses shop air to drive O2 Booster), complete with booster and regulator system. | 1 | |
| 2000928 | 2-Bottle hand-moveable oxygen/nitrogen CART ONLY with retractable casters & pneumatic tires. Can be outfitted with booster for complete systems. | 1 | |
| 2000971 | 2-Bottle hand-movable aircraft oxygen service cart. Retractable casters & pneumatic tires. For remote (ramp) or in-hangar use, complete with booster and regulator system. | 1 | |
| 2001011 | LC180-RJ2G Low Profile Aircraft Lavatory Service Cart. Includes all hoses & couplers required to service aircraft. Honda GX160 electric start engine mated to Teel centrifugal pump (31gpm @ 25psi; 29psi max), 110 gallon waste and 70 gallon fill tanks of r | 1 | |
| 2001017 | LC270-RJ3G Low Profile Aircraft Lavatory Service Cart. Includes all hoses & couplers required to service aircraft. Honda GX160 electric start engine mated to Teel centrifugal pump (31gpm @ 25psi; 29psi max), 170 gallon waste and 110 gallon fill tanks o | 1 | |
| 2001019 | LC270G-Insert Aircraft Lavatory Service Unit (for mounting in 3/4-ton pickup truck). Includes all hoses & couplers required to service aircraft (12' waste & 15' fill hose). Honda GX160 electric start gas engine mated to Teel centrifugal pump (31gpm @ 25 | 1 | |
| 2001030 | WC180-RJ2-G Low Profile Potable Water Service Cart. Includes hose & couplers required for servicing aircraft. Honda GX160 electric start engine mated to a Teel centrifugal pump (31gpm @ 25psi; 29psi max), 180 gallon capacity corrosion proof stainless ste | 1 | |
| 2001033 | WC270-RJ3-G Low Profile Potable Water Service Cart. Honda GX160 electric start engine mated to Teel centrifugal pump (31gpm @ 25psi; 29psi max), 270 gallon corrosion proof stainless steel winterized tanks and insulated aluminum enclosure on heavy-duty g | 1 | |
| 2001035 | New WC270G-Insert Potable Water unit. Includes hose & couplers required to service aircraft. 270-gallons capacity stainless steel tank in insulated aluminum enclosure, Honda GX160 electric start gas engine mated to Teel centrifugal pump (31gpm @ 25psi; 2 | 1 | |
| 2001036 | WC450G-Insert Potable Water unit. Includes hose & couplers required to service aircraft. 450-gallons capacity stainless steel tank in insulated aluminum enclosure, Honda GX160 electric start gas engine mated to Teel centrifugal pump (31gpm @ 25psi; 29psi | 1 | |
| 2001065 | Boeing 727 & 707 (KC-135 & E-3) towbar with hydraulic lift and pneumatic tires | 1 | |
| 2001212 | PNEUMATIC START WYE ADAPTER (Y-ADAPTER) | 1 | |
| 2001376 | Helicopter towbar for SH-60B, F Seahawk, HH-60H, J Jayhawk and Sikorsky S70B series with dual tail wheels:Specifications: 3 piece aluminum towbar (2 piece towbar and detachable head). Assembled overall length is approximately 24 ft., allowing turning clea | 1 | |
| 2001752 | aircraft tire service trailer built to accommodate at least (2) aircraft tires, jacks, etc. Heavy duty chassis and running gear with 8000 lb. capacity and pneumatic tires. Diamond Plate Floor. Customization for specific aircraft tires available upon reque | 1 | |
| 2002446 | LC180-RJ2G Low Profile Aircraft Lavatory Service Cart (CE version and/or 50hz input). Includes all hoses & couplers required to service aircraft. Honda GX160 electric start engine mated to Teel centrifugal pump (31gpm @ 25psi; 29psi max), 110 gallon wast | 1 | |
| 2002448 | LC270-RJ3G Low Profile Aircraft Lavatory Service Cart (CE version and/or 50hz input). Includes all hoses & couplers required to service aircraft. Honda GX160 electric start engine mated to Teel centrifugal pump (31gpm @ 25psi; 29psi max), 170 gallon wa | 1 | |
| 2002450 | LC270G-Insert Aircraft Lavatory Service Unit (CE version and/or 50hz input)(for mounting in 3/4-ton pickup truck). Includes all hoses & couplers required to service aircraft (12' waste & 15' fill hose). Honda GX160 electric start gas engine mated to Tee | 1 | |
| 2002457 | WC180-RJ2-G Low Profile Potable Water Service Cart. (CE version and/or 50hz input)Includes hose & couplers required for servicing aircraft. Honda GX160 electric start engine mated to a Teel centrifugal pump (31gpm @ 25psi; 29psi max), 180 gallon capacity | 1 | |
| 2002459 | WC270-RJ3-G Low Profile Potable Water Service Cart. (CE version and/or 50hz input)Honda GX160 electric start engine mated to Teel centrifugal pump (31gpm @ 25psi; 29psi max), 270 gallon corrosion proof stainless steel winterized tanks and insulated alum | 1 | |
| 2002463 | WC100G Galvanized Potable Water Truck. Includes hose & couplers for servicing aircraft. 100 gallon capacity, stainless steel tank, Level gauge, Honda GX120 engine mated to Teel centrifugal pump (31gpm @ 25psi; 29psi max) with backup hand pump. Trailer m | 1 | |
| 2014500 | Trailer mount: Optional towable trailer with pneumatic tyres for TRU-28 (all versions) | 1 | |
| 2019272 | (2) Towable trailer (pneumatic tyres) cable horn and cable storage. Compatible with 400Hz and 400Hz + 28VDC unit | 1 | |
| 2021924 | Boeing 727 & 707 (KC-135 & E-3) towbar with hydraulic lift and pneumatic tires - EN (CE) | 1 | |
| 3791072 | PNEUMATIC DRIVE ACTUATOR TEST STAND | 1 | |
| 19450408 | ENGINE PNEUMATIC TEST KIT | 2 | |
| 23033027 | PULLER BEARING AND MATTING SEAL RACE COMPRESSOR FRONT | 2 | |
| 30015030 | PNUEMATIC DE-ICER TESTING CONSOLE (PRESSURE BAR, TEMP C°) | 1 | |
| 30015031 | PNUEMATIC DE-ICER TESTING CONSOLE (PRESSURE BAR, TEMP F°) | 1 | |
| 2068011363476 | PROBE FOR SIGMATEST | 1 | |
| 4072C | BOEING OPTICAL CENTER 747 PT 6 53-30-05. Material Plexiglass. Includes Test Report and Certificate of Conformance. | 1 | |
| 4090 MTD KIT | INSTALLATION TOOL,FASTENER,PNEUMATIC | 1 | |
| 4090KIT | INSTALLATION TOOL,FASTENER,PNEUMATIC | 3 | |
| 410-350-4-6PLY | TIRE: PNUEMATIC, | 2 | |
| 410-350-6TR | TIRE: PNUEMATIC, | 2 | |
| 41002-01 | SkyGeek 41002-01 Brown Phenolic 38 x 6-12 x 2 Pneumatic Rivet Gun Sealant Scraper | 2 | |
| 437 | BOEING REFERENCE STANDARD 747 53-10-01 PART 4 PAGE 11 FIGURE 2. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 438 | BOEING REFERENCE STANDARD 747 53-10-01 PART 4 PAGE 11 FIGURE 2. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 4090 | INSTALLATION TOOL,FASTENER,PNEUMATIC | 1 | |
| 4455A0000-01 | AUTOMATIC FILLER P/N 4455A0000-01 | 2 | |
| 446-1-X | PHILLIPS MATES WITH TS30 | 7 | |
| 45-127-1 | Custom Probe Locating Bushing Tool Figure 1 Page 6 Item #1. Material 2024-T3 Aluminum. | 1 | |
| 45-127-2 | Custom Probe Locating Bushing Tool Figure 1 Page 6 Item #2. Material 2024-T3 Aluminum. | 1 | |
| 45-128 | Custom 8 Hole Calibration Standard Test Coupon Assembly Figure 5 Page 10 to include the following Pieces. Figure 2 Page 7. Material .071" 2024-T3 Clad Aluminum, 7 EDM Flaws total. Figure 3 Page 8 .250" 4130or4340 Steel 0 EDM Flaws total and Figure 4... | 2 | |
| 45-128-1 | Custom 8 Hole Calibration Standard Test Coupon. Figure 1 Page 7. Material .071" 2024-T3 Clad Aluminum. 7 EDM Flaws total. | 1 | |
| 45-128-2 | Custom 8 Hole Calibration Standard Test Coupon. Figure 3 Page 8. Material .250" 4130/4340 Steel. 0 EDM Flaws total. | 1 | |
| 45-128-3 | Custom 8 Hole Calibration Standard Test Coupon. Figure 4 Page 9. Material .125" 2024-T3 Clad Aluminum. 0 EDM Flaws total. | 1 | |
| 4500-5138-001 | AMAT HUD MOD EQUIPMENT | 1 | |
| 4500-5570-001 | AMAT ASSEMBLY 767 HUD MOD EQUIP (2 boxes) | 1 | |
| 4505 | PNEUMATIC GREASE PUMP A-1/5 KG | 1 | |
| 45200001-PDL | PDL (PMAT2000) FOR NDB | 1 | |
| 4550A | ASTRO PNEUMATIC 4550A AIR OPERATED PAINT SHAKER | 1 | |
| 45525K562 | PNEUMATIC CONNECTOR | 1 | |
| 456MAX-701-17 | PULLING HEAD,PNEUMATIC RIVETER | 2 | |
| 456MAX-749-35 | PULLING HEAD,PNEUMATIC RIVETER | 1 | |
| 456MAX-763A-43 | PULLING HEAD,PNEUMATIC RIVETER | 1 | |
| 45TS-TM | 45TS-TM;Time and Material Repair - 45TS | 1 | |
| 45V03 | TIG WELDING TORCH POWER CABLE (MATERIAL- VINYL, SIZE - 12.5 FT) | 2 | |
| 460006497 | HYDRAULIC PNEUMATIC PUMP SET | 2 | |
| 468-261 | HOLTEST - DIGIMATIC 3 PT INTERNAL MIKE | 1 | |
| 468-262 | HOLTEST - DIGIMATIC 3 PT INTERNAL MIKE | 1 | |
| 468-263 | HOLTEST - DIGIMATIC 3 PT INTERNAL MIKE | 1 | |
| 468-265 | HOLTEST - DIGIMATIC 3 PT INTERNAL MIKE | 1 | |
| 468-270 | HOLTEST - DIGIMATIC 3 PT INTERNAL MIKE | 1 | |
| 468-271 | HOLTEST - DIGIMATIC 3 PT INTERNAL MIKE | 2 | |
| 468-272 | HOLTEST - DIGIMATIC 3 PT INTERNAL MIKE | 2 | |
| 468-273 | HOLTEST - DIGIMATIC 3 PT INTERNAL MIKE | 2 | |
| 468-280 | DIGIMATIC HOLTEST THREE POINT INTERNAL MICROMETER (10-11") | 2 | |
| 475 | BOEING 747 REFERENCE STANDARD PART 6 57-10-27 FIGURE 1 PAGE 4. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 6 | |
| 48183 | HEAD-CRIMPING PNEUMATIC TOOL | 3 | |
| 492-219 | WHEEL, SEMI-PNEUMATIC | 1 | |
| 492X | PNEUMATIC SCREW HEAD | 4 | |
| 4BY76 | PNEUMATIC GREASE GUN - AEROSHELL 33 | 2 | |
| 4L93ZPH4R2 | POSITIONNEUR ELECTRO-PNEUMATIC | 1 | |
| 4X (PISTOL GRIP) | PNEUMATIC RIVET GUN 4X PISTOL GRIP | 1 | |
| 4X (STRAIGHT) | PNEUMATIC RIVET GUN 4X STRAIGHT | 1 | |
| 5 | Cyclo® Orbital Aircraft Polishers (Nominal diameter: 0.45 hp Pneumatic) (Rpm (no load): 3200) (Add to cart: Contact us to order) (Nominal diameter: 115V - 60 Hz) (Rpm (no load): 3200) (Add to cart: Contact us to order) | 1 | |
| 5.12002E 12 | PULLER, SEAL MATING, AXIS-G CARBON SEAL | 1 | |
| 500-153 | Mitutoyo 500-153 ABSOLUTE Digimatic Caliper 0-300mm | 1 | |
| 500-160-30 | ABSOLUTE DIGIMATIC CALIPER, RANGE 0-6" | 1 | |
| 500-171 | CALIPER 0-6 ,DIGIMATIC | 3 | |
| 500-171-30 | Mitutoyo 500-171-30 ABSOLUTE Digimatic Caliper 0-150mm / 0-6" | 4 | |
| 500-172 | CALIPER 0-8",DIGIMATIC | 1 | |
| 500-172-20 | Digimatic Calipers (Range: 0" to 8") (Accuracy: +- .001") (Resolution: .00005") (Add to cart: Add To Cart) (Range: 0" to 8") (Accuracy: +- .001") (Resolution: .00005") (Add to cart: Contact us to order) | 2 | |
| 500-172-30 | Mitutoyo 500-172-30 ABSOLUTE Digimatic Caliper 0-200mm / 0-8" | 4 | |
| 500-173 | Mitutoyo 500-173 ABSOLUTE Digimatic Caliper 0-300mm / 0-12" | 1 | |
| 500-174-30 | Mitutoyo 500-174-30 ABSOLUTE Digimatic Caliper 0-150mm / 0-6" | 1 | |
| 500-175-20 | Mitutoyo 500-175-20 ABSOLUTE Digimatic Caliper 0-150mm / 0-6" | 1 | |
| 500-176-20 | Mitutoyo 500-176-20 ABSOLUTE Digimatic Caliper 0-200mm / 0-8" | 1 | |
| 500-177-20 | Mitutoyo 500-177-20 ABSOLUTE Digimatic Caliper 0-200mm / 0-8" | 1 | |
| 500-181-30 | CALIPER - DIGIMATIC 0-150 MM | 3 | |
| 500-193 | Mitutoyo 500-193 ABSOLUTE Digimatic Caliper 0-300mm / 0-12" | 2 | |
| 500-193-30 | MITUTOYO JAPAN 500-193-30 300MM/12" ABSOLUTE DIGITAL DIGIMATIC VERNIER CALIPER | 1 | |
| 500-196-20 | Mitutoyo 500-196-20 ABSOLUTE Digimatic Caliper 0-150mm / 0-6" | 2 | |
| 500-196-30 | Mitutoyo 500-196-30 ABSOLUTE AOS Digimatic Caliper 0-150mm / 0-6" | 3 | |
| 500-197 | DIGIMATIC CALIPERS NO 500 | 1 | |
| 500-197-30 | Mitutoyo 500-197-30 ABSOLUTE AOS Digimatic Caliper 0-200mm / 0-8" | 3 | |
| 500-200 | PNEUMATIC LID CLOSURES ON WATER JACKET IN PLACE OF MANUAL CLOSURES | 1 | |
| 500-464 | Mitutoyo 500-464 ABSOLUTE Digimatic Solar Caliper 0-150mm / 0-6" | 1 | |
| 500-465 | Mitutoyo 500-465 ABSOLUTE Digimatic Solar Caliper 0-200mm / 0-8" | 1 | |
| 500-474 | Mitutoyo 500-474 ABSOLUTE Digimatic Solar Caliper 0-150mm / 0-6" | 1 | |
| 500-475 | Mitutoyo 500-475 ABSOLUTE Digimatic Solar Caliper 0-200mm / 0-8" | 1 | |
| 500-501-10 | Mitutoyo 500-501-10 ABSOLUTE Digimatic Caliper 0-600mm | 1 | |
| 500-505-10 | Mitutoyo 500-505-10 ABSOLUTE Digimatic Caliper 0-450mm / 0-18" | 2 | |
| 500-506-10 | Mitutoyo 500-506-10 ABSOLUTE Digimatic Caliper 0-600mm / 0-24" | 1 | |
| 500-507-10 | Mitutoyo 500-507-10 ABSOLUTE Digimatic Caliper 0-1000mm / 0-40" | 1 | |
| 500-735-10 | Mitutoyo 500-735-10 ABSOLUTE Digimatic Coolant Proof Caliper 0-150mm / 0-6", Carbide tipped jaws | 1 | |
| 500-736-10 | Mitutoyo 500-736-10 ABSOLUTE Digimatic Coolant Proof Caliper 0-200mm / 0-8", Carbide tipped jaws | 1 | |
| 500-737-10 | Mitutoyo 500-737-10 ABSOLUTE Digimatic Coolant Proof Caliper 0-150mm / 0-6", Carbide tipped jaws | 1 | |
| 500-738-10 | Mitutoyo 500-738-10 ABSOLUTE Digimatic Coolant Proof Caliper 0-200mm / 0-8", Carbide tipped jaws | 1 | |
| 500-752-20 | Mitutoyo 500-752-20 ABSOLUTE Digimatic Coolant Proof Caliper 0-150mm / 0-6" | 1 | |
| 500-753-10 | Mitutoyo 500-753-10 ABSOLUTE Digimatic Coolant Proof Caliper 0-200mm / 0-8" | 1 | |
| 500-754-10 | ABSOLUTE DIGIMATIC CALIPER 0-300MM | 1 | |
| 500-762-10 | Mitutoyo 500-762-10 ABSOLUTE Digimatic Coolant Proof Caliper 0-150mm / 0-6" | 1 | |
| 500-763-10 | Mitutoyo 500-763-10 ABSOLUTE Digimatic Coolant Proof Caliper 0-200mm / 0-8" | 1 | |
| 500-764-10 | Mitutoyo 500-764-10 ABSOLUTE Digimatic Coolant Proof Caliper 0-300mm / 0-12" | 1 | |
| 500-784 | Mitutoyo 500-784 ABSOLUTE Digimatic Solar Super Caliper 0-150mm / 0-6" | 1 | |
| 500-785 | Mitutoyo 500-785 ABSOLUTE Digimatic Solar Super Caliper 0-200mm / 0-8" | 1 | |
| 500-786 | Mitutoyo 500-786 ABSOLUTE Digimatic Solar Super Caliper 0-150mm / 0-6" | 1 | |
| 500-787 | Mitutoyo 500-787 ABSOLUTE Digimatic Solar Super Caliper 0-200mm / 0-8" | 1 | |
| 50000-002 | PMAT | 1 | |
| 50000-005 | PMAT | 1 | |
| 500D-1 | PNEUMATIC CRIMP TOOL | 2 | |
| 501/1 | PNEUMATIC SCRAPER SHARPENER | 7 | |
| 501/1, | PNEUMATIC SCRAPER SHARPENER | 7 | |
| 5038A9900-01 | MATERIAL KIT SB-117C2-67-021-2C2 (LIEBHERR P/N 5038A9900-01) FOR BK117 C2 | 1 | |
| 505-510-001 | BELL 505 AUTOMATIC DOOR OPENER L/H | 1 | |
| 505-510-002 | BELL 505 AUTOMATIC DOOR OPENER R/H | 1 | |
| 50520 | JO-BOLT PNUMATIC | 3 | |
| 50526 | JO-BOLT PNEUMATIC PISTOL DRIVER KIT S540MTD | 1 | |
| 50531 | JO-BOLT PNEUMATIC INSTALLATION TOOL USED | 1 | |
| 50536 | HI-LOK® PNEUMATIC TOOL KIT USED | 1 | |
| 51-290121-4-1 | PNEUMATIC ITCAM TESTER | 1 | |
| 5130NL-LBV25-90 | PNEUMATIC BRACE 90 DEGREE | 1 | |
| 51400 | PNEUMATIC ROTARY BUFFER, 3 INCH DIAMETER, OFFSET HANDLE | 1 | |
| 5163A43 | WRENCH SET:COMBINATION TYPE:RATCHETING BOX SIZE:3/8 INCH - 3/4 INCH OPEN SIZE:3/8INCH - 3/4INCH STYLE:12- POINT MATL:CHROME PLATED NUMBER OF PIECES:10 PIECES CONT:PLASTIC WRENCH:COMBINATION STANDARD SET IN INCHES TOOLS - HAND / POWER :STANDARD SET IN INCH | 1 | |
| 51649 | CASE FOR MASTERMATIC-2 PRO | 1 | |
| 520CTK | Portable Pneumatic Swaged Terminal Pull Tester Kit (Description: Rebuilt Kit*) (Add to cart: Contact us to order) (Description: Complete Kit) (Add to cart: Add To Cart) | 1 | |
| 520D | Pneumatic Stationary Cable Swager (Drill size & pilot diameter: 1/2D x 24"W x 58"H) (Add to cart: Add To Cart) | 1 | |
| 520J | Portable Pneumatic Cable Terminal Swager Kit (Description: Rebuilt Kit*) (Add to cart: Add To Cart) (Description: Swager Only) (Add to cart: Add To Cart) | 1 | |
| 520JK | Portable Pneumatic Cable Terminal Swager Kit (Description: Rebuilt Kit*) (Add to cart: Add To Cart) (Description: Swager Only) (Add to cart: Add To Cart) (Description: Complete Kit) (Add to cart: Add To Cart) | 1 | |
| 53-10-110A | Raytheon 125 Series Calibration Standard. Material: 4340 Cres Steel. Includes Test Report and Certificate of Conformance. | 2 | |
| 530-12X6PR | TIRE: 5:30-12,6PLY,PNEUMATIC, | 2 | |
| 539650-2 | MATRIZE JPT/TAB EDS | 1 | |
| 539664-2 | MATRIZE JPT/TAB 2;8 | 1 | |
| 539665-2 | MATRIZE SPT/TAB 4;8 | 1 | |
| 539666-2 | MATRIZE SPT/TAB 4;8 | 1 | |
| 539668-2 | MATRIZE TYPE 3+ | 1 | |
| 539674-2 | MATRIZE JPT | 1 | |
| 54-125-777 | DIGIMATIC DEPTH GAGE | 1 | |
| 54273 | HEAD BEND SPLIT AUTOMATIC | 3 | |
| 543-004-1 | Mitutoyo 543-004-1 Digimatic Presetter | 1 | |
| 543-281b | Mitutoyo 543-281b ABSOLUTE Digimatic Signal Output Indicator ID-C | 1 | |
| 543-396B | Mitutoyo 543-396B ABSOLUTE Digimatic Indicator, Low Measuring Force Type ID-C, 12.7mm / .5" | 1 | |
| 543-402BD | DIGIMATIC INDICATOR DEPTH GAUGE | 2 | |
| 543-452B | CALIPERS- DIGIMATIC | 1 | |
| 543-581 | Mitutoyo 543-581 ABSOLUTE Digimatic Back Plunger Indicator ID-B 5mm / .2" | 1 | |
| 543-586 | Mitutoyo 543-586 ABSOLUTE Digimatic Back Plunger Indicator ID-B 5mm / .2" | 1 | |
| 543-712 | DIGIMATIC INDICATOR DEPTH GAUGE | 1 | |
| 543452B | CALIPERS- DIGIMATIC | 1 | |
| 545SD | JACK - AXLE 30 TON 2 STAGE AIR (PNEUMATIC CONTROL) | 1 | |
| 54665 | UNIVERSAL HOSE PX KIT FOR AXLE JACK , CONNECT A/C WHEEL & JACK BORE VLVFOR PNEUMATIC ASSITANCE FOR BIG & SMALL | 1 | |
| 547-217S | Mitutoyo 547-217S ABSOLUTE Digimatic Depth Gauge 0-200mm / 0-8" | 2 | |
| 547-218S | DIGIMATIC INDICATOR DEPTH GAUGE | 4 | |
| 547-257S | DIGIMATIC DEPTH GAUGE | 1 | |
| 547-258S | Mitutoyo 547-258S ABSOLUTE Digimatic Depth Gauge 0-200mm / 0-8" | 1 | |
| 547SD | JACK MLG 50 T 2 STAGE AIR (PNEUMATIC CONTROL) | 1 | |
| 550-010 | PNEUMATIC BENCH VICE | 1 | |
| 550-223-10 | Mitutoyo 550-223-10 ABSOLUTE Digimatic Caliper 0-450mm / 0-18", Nib style jaws | 1 | |
| 550-225-10 | Mitutoyo 550-225-10 ABSOLUTE Digimatic Caliper 0-600mm / 0-24", Nib style jaws | 1 | |
| 550-227-10 | Mitutoyo 550-227-10 ABSOLUTE Digimatic Caliper 0-1000mm / 0-40", Nib style jaws | 1 | |
| 550-341-10 | Mitutoyo 550-341-10 ABSOLUTE Digimatic Caliper 0-300mm / 0-12", Nib style jaws | 1 | |
| 551-341-10 | Mitutoyo 551-341-10 ABSOLUTE Digimatic Caliper 0-300mm / 0-12", Nib and Standard Jaws | 1 | |
| 552-151-10 | Mitutoyo 552-151-10 ABSOLUTE Digimatic Long Jaw Carbon Fibre Caliper 0-600mm | 1 | |
| 552-160-10 | Mitutoyo 552-160-10 ABSOLUTE Digimatic Long Jaw Carbon Fibre Caliper 0-450mm / 0-18" | 1 | |
| 552-161-10 | Mitutoyo 552-161-10 ABSOLUTE Digimatic Long Jaw Carbon Fibre Caliper 0-600mm / 0-24" | 1 | |
| 552-162-10 | Mitutoyo 552-162-10 ABSOLUTE Digimatic Long Jaw Carbon Fibre Caliper 0-1000mm / 0-40" | 1 | |
| 552-163-10 | Mitutoyo 552-163-10 ABSOLUTE Digimatic Long Jaw Carbon Fibre Caliper 0-1500mm / 0-60" | 1 | |
| 552-164-10 | Mitutoyo 552-164-10 ABSOLUTE Digimatic Long Jaw Carbon Fibre Caliper 0-2000mm / 0-80" | 1 | |
| 552-165-10 | Mitutoyo 552-165-10 ABSOLUTE Digimatic Ceramic Jaw Carbon Fibre Caliper 0-450mm / 0-18" | 1 | |
| 552-166-10 | Mitutoyo 552-166-10 ABSOLUTE Digimatic Ceramic Jaw Carbon Fibre Caliper 0-600mm / 0-24" | 1 | |
| 552-312-10 | Mitutoyo 552-312-10 ABSOLUTE Digimatic Carbon Fibre Caliper 0-450mm / 0-18" | 1 | |
| 552-313-10 | Mitutoyo 552-313-10 ABSOLUTE Digimatic Carbon Fibre Caliper 0-600mm / 0-24" | 1 | |
| 552-314-10 | Mitutoyo 552-314-10 ABSOLUTE Digimatic Carbon Fibre Caliper 0-1000mm / 0-40" | 1 | |
| 552-315-10 | DIGIMATIC CARBON FIBER CALIPER 60 | 1 | |
| 552-316-10 | Mitutoyo 552-316-10 ABSOLUTE Digimatic Carbon Fibre Caliper 0-2000mm / 0-80" | 1 | |
| 5570 | Swager - Power, Stationary Automatic | 1 | |
| 55453 | HEXAGONAL SCREWDRIVER 5/64" X 2" MICROTRONIC BIMAT WITH HEX. TIP | 1 | |
| 55455 | HEXAGONAL BALL POINT SCREWDRIVER 5/64" X 2" MICROTRONIC BIMAT. | 1 | |
| 55457 | HEXAGONAL BALL POINT SCREWDRIVER 1/8" X 2" MICROTRONIC BIMAT. | 1 | |
| 55458 | HEXAGONAL SCREWDRIVER 1/16" X 2" MICROTRONIC BIMAT WITH HEX. TIP | 1 | |
| 55835 | PNEUMATIC IMPACT WRENCH 3/8" - 610 Nm | 1 | |
| 55836 | PNEUMATIC IMPACT WRENCH 1/2" - 680 Nm | 1 | |
| 55838 | PNEUMATIC IMPACT WRENCH 1" - 3900 Nm WITH EXTENDED ANVIL 8" | 1 | |
| 55839 | PNEUMATIC RACHET WRENCH 1/4" 30 Nm | 1 | |
| 55840 | PNEUMATIC RACHET WRENCH 3/8" 68 Nm | 1 | |
| 55841 | PNEUMATIC RACHET WRENCH 1/2" 68 Nm | 1 | |
| 55843 | PNEUMATIC HOSE REEL | 1 | |
| 55844 | PNEUMATIC IMPACT WRENCH 1" - 3900 Nm WITH EXTENDED ANVIL 2" | 1 | |
| 55845 | PNEUMATIC IMPACT WRENCH 3/4" - 1695 Nm | 1 | |
| 55846 | PNEUMATIC IMPACT WRENCH 3/8" - 610 Nm | 1 | |
| 55847 | PNEUMATIC IMPACT WRENCH 1/2" - 678 Nm | 1 | |
| 55848 | PNEUMATIC RACHET WRENCH 1/4" - 27 Nm | 1 | |
| 55RNAL-3T-4 | Nutrunner - Angle, Pneumatic Drive, Reversible | 5 | |
| 55RNAL-3T4 | 1/2 PNEUMATIC DRIVE | 5 | |
| 55RNAL3T4 | NUTRUNNER ANGLE PNEUMATIC | 5 | |
| 56053 | PNEUMATIC IMPACT WRENCH 1" - 3900 NM WITH EXTENDED ANVIL 2" | 1 | |
| 56054 | PNEUMATIC IMPACT WRENCH 1" - 3900 NM WITH EXTENDED ANVIL 8" | 1 | |
| 56062 | ROSCAMATIC-2 " COMBI " BSPT 220-240V | 1 | |
| 56063 | ROSCAMATIC-2 "COMBI " NPT 220-240V | 1 | |
| 56064 | ROSCAMATIC-2 "COMBI" BSTP 110 V | 1 | |
| 56065 | ROSCAMATIC-2 "COMBI" NPT 110 V | 1 | |
| 560M | PNEUMATIC VACUUM CLEANER | 1 | |
| 568-955 | BOREMATIC 3-POINT DIGITAL BORE GAGE | 1 | |
| 56950 | ROSCAMATIC 50-2 BSPT 220 - 240 V /50-60 Hz | 1 | |
| 56951 | ROSCAMATIC 50-2 NPT 220 - 240 V /50-60 Hz | 1 | |
| 56952 | ROSCAMATIC 50-2 BSPT 110 V / 50-60 Hz | 1 | |
| 56953 | ROSCAMATIC 50-2 NPT 110 V / 50-60 Hz | 1 | |
| 56955 | ROSCAMATIC 80-3 BSPT 220-240 V / 50 - 60 HZ | 1 | |
| 56956 | ROSCAMATIC 80-3 NPT 220-240 V / 50 - 60 HZ | 1 | |
| 56957 | ROSCAMATIC 80-3 BSPT110 V / 50 - 60 HZ | 1 | |
| 56958 | ROSCAMATIC 80-3 NPT 110 V / 50 - 60 HZ | 1 | |
| 56960 | ROSCAMATIC 100-4 BSPT 220-240 V / 50 - 60 HZ | 1 | |
| 56961 | ROSCAMATIC 100-4 NPT 220-240 V / 50 - 60 HZ | 1 | |
| 56962 | ROSCAMATIC 100-4 BSPT 110 V / 50 - 60 HZ | 1 | |
| 56963 | ROSCAMATIC 100-4 NPT 110 V / 50 - 60 HZ | 1 | |
| 57-10-119/1 | BAE 146-RJ SERIES REFERENCE STANDARD 57-10-42 PT 6 FIGURES 4&5 PAGE 7&8. Material: 7075-T6 & 2014A-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 57-20-148A/1 | BAE 146-RJ SERIES REFERENCE STANDARD 57-20-24 PT 6 FIGURES 5&6 PAGE 9&10. Material: 2024-T3 & 2024-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 57-20-163/1 | BAE 146-RJ SERIES REFERENCE STANDARD 57-20-28 PT 6 FIGURES 4&5 PAGE 9&10. Material: 2024-T3 & 2024-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 57000 | PRESSMATIC Ø 12-54 (108) MM PORTABLE 100 - 240 V ( 50-60 Hz) | 1 | |
| 57070 | PNEUMATIC SCREWDRIVER 1800 RPM 5-13 Nm REVERSIBLE | 1 | |
| 57071 | PNEUMATIC SCREWDRIVER 1800 RPM 13 Nm REVERSIBLE | 1 | |
| 57072 | PNEUMATIC DRILL 1800 RPM - CAP 10 MM -3/8" REVERSIBLE | 1 | |
| 57073 | PNEUMATIC DRILL 1800 RPM - CAP 10 MM -3/8" NON REVERSIBLE | 1 | |
| 57074 | PNEUMATIC SANDER 12000 RPM PAD 6" - ORBIT Ø 5 MM WITH DUST BAG | 1 | |
| 57075 | PNEUMATIC SANDER 12000 RPM PAD 6" - ORBIT Ø 2,5 MM | 1 | |
| 57076 | PNEUMATIC BELT SANDER 16000 RPM 10 X 330 MM | 1 | |
| 57077 | PNEUMATIC BELT SANDER 16000 RPM 20 X 520 MM | 1 | |
| 57078 | PNEUMATIC STRAIGHT GRINDER 22000 RPM Ø 6 MM | 1 | |
| 57079 | PNEUMATIC ANGLE GRINDER 18000 RPM Ø 6 MM | 1 | |
| 57080 | PNEUMATIC ANGLE GRINDER 11000 RPM - CAP. 125 MM | 1 | |
| 57081 | PNEUMATIC VERTICAL SANDER 7000 RPM CAP. 178 MM | 1 | |
| 57082 | PNEUMATIC HAMMER 3500 BMP HEX. 10 MM | 1 | |
| 57083 | PNEUMATIC BODY SAW 10000 RPM / BLADES 18T-24T-32T | 1 | |
| 57084 | PNEUMATIC WINDSCREEEN REMOVER 20000 RPM | 1 | |
| 57085 | PNEUMATIC STAPLER 1/4" - 5/8" | 1 | |
| 57099 | PNEUMATIC GREASE GUN | 1 | |
| 571-211-20 | Mitutoyo 571-211-20 ABSOLUTE Digimatic Depth Gauge 0-150mm / 0-6" | 1 | |
| 571-212-30 | Mitutoyo 571-212-30 ABSOLUTE Digimatic Depth Gauge 0-200mm / 0-8" | 1 | |
| 571-213-10 | Mitutoyo 571-213-10 ABSOLUTE Digimatic Depth Gauge 0-300mm / 0-12" | 1 | |
| 571-214-10 | Mitutoyo 571-214-10 ABSOLUTE Digimatic Depth Gauge 0-450mm / 0-18" | 1 | |
| 571-215-10 | Mitutoyo 571-215-10 ABSOLUTE Digimatic Depth Gauge 0-600mm / 0-24" | 2 | |
| 571-216-10 | Mitutoyo 571-216-10 ABSOLUTE Digimatic Depth Gauge 0-750mm / 0-30" | 1 | |
| 571-217-10 | Mitutoyo 571-217-10 ABSOLUTE Digimatic Depth Gauge 0-1000mm / 0-40" | 1 | |
| 571-261-10 | Mitutoyo 571-261-10 ABSOLUTE Digimatic Coolant Proof Depth Gauge 0-150mm / 0-6" | 1 | |
| 571-261-20 | DIGIMATIC DEPTH GAUGE | 1 | |
| 571-262-10 | Mitutoyo 571-262-10 ABSOLUTE Digimatic Coolant Proof Depth Gauge 0-200mm / 0-8" | 1 | |
| 571-263-10 | Mitutoyo 571-263-10 ABSOLUTE Digimatic Coolant Proof Depth Gauge 0-300mm / 0-12" | 1 | |
| 571-264-10 | Mitutoyo 571-264-10 ABSOLUTE Digimatic Coolant Proof Hook End Depth Gauge 10-160mm / .4-6.4" | 1 | |
| 571-265-10 | Mitutoyo 571-265-10 ABSOLUTE Digimatic Coolant Proof Hook End Depth Gauge 10-210mm / .4-8.4" | 1 | |
| 571200MOT10 | DIGIMATIC TREAD DEPTH GAGE | 1 | |
| 57146 | PNEUMATIC RIVETER CAP. 2,4 - 4,8 MM | 1 | |
| 57147 | PNEUMATIC RIVETER CAP. 2,4 - 6,4 MM (VACUUM) | 1 | |
| 57154 | PNEUMATIC ANGLE GRINDER 11000 RPM CAP. 125 MM | 1 | |
| 573-291-20 | Mitutoyo 573-291-20 ABSOLUTE Digimatic Low Force Caliper 0-180mm / 0-7" | 1 | |
| 573-661 | Mitutoyo 573-661 ABSOLUTE Digimatic Tube Thickness Caliper 0-150mm | 1 | |
| 573-701 | Mitutoyo 573-701 ABSOLUTE Digimatic Offset Caliper 0-150mm / 0-6" | 1 | |
| 573-702 | Mitutoyo 573-702 ABSOLUTE Digimatic Offset Caliper 0-200mm / 0-8" | 1 | |
| 573-704 | Mitutoyo 573-704 ABSOLUTE Digimatic Offset Caliper 0-300mm / 0-12" | 1 | |
| 573-705 | Mitutoyo 573-705 ABSOLUTE Digimatic Offset Centreline Caliper 10-160mm / .4-6.4" | 1 | |
| 573-706 | Mitutoyo 573-706 ABSOLUTE Digimatic Offset Centreline Caliper 10-210mm / .4-8.4" | 1 | |
| 573-708 | Mitutoyo 573-708 ABSOLUTE Digimatic Offset Centreline Caliper 10-310mm / .4-12.4" | 1 | |
| 573-721 | Mitutoyo 573-721 ABSOLUTE Digimatic Coolant Proof Point Caliper 0-150mm / 0-6" | 1 | |
| 573-734 | Mitutoyo 573-734 ABSOLUTE Digimatic Blade Caliper 0-150mm / 0-6" | 1 | |
| 573-742 | Mitutoyo 573-742 ABSOLUTE Digimatic Inside Knife-edge Caliper 10-200mm / .4-8" | 1 | |
| 573-745 | Mitutoyo 573-745 ABSOLUTE Digimatic Inside Groove Caliper 10-160mm / .4-6.4" | 1 | |
| 573-746 | Mitutoyo 573-746 ABSOLUTE Digimatic Inside Point Jaw Caliper 20-150mm / .8-6" | 1 | |
| 573-751 | Mitutoyo 573-751 ABSOLUTE Digimatic Neck Caliper 0-150mm / 0-6" | 1 | |
| 573-752 | Mitutoyo 573-752 ABSOLUTE Digimatic Neck Point Type Caliper 0-150mm / 0-6" | 1 | |
| 573-761 | Mitutoyo 573-761 ABSOLUTE Digimatic Tube Thickness Caliper 0-150mm / 0-6" | 1 | |
| 57667 | PNEUMATIC IMPACT WRENCH 1/2" WITH TORQUE CONTROL | 1 | |
| 57668 | NEUMATIC IMPACT WRENCH 1/2" WITH TORQUE CONTROL AND DIGITAL DISPLAY | 1 | |
| 57684 | HEXAGONAL SCREWDRIVER 1,5 X 50 MM MICROTRONIC BIMAT WITH HEX. TIP | 1 | |
| 57685 | HEXAGONAL SCREWDRIVER 2 X 50 MM MICROTRONIC BIMAT WITH HEX. TIP | 1 | |
| 58075-1 | PNEUMATIC HANDLE W/O HEAD | 1 | |
| 58190-5 | HT ASSY; OPTIMATE; W/O LOCATOR | 1 | |
| 58190-6 | HT ASSY; OPTIMATE; W/O LOCATOR | 1 | |
| 58495-1 | PRO CRIMPER ASSY MULTIMATE | 5 | |
| 58495-2 | PROCRIMPER DIE ASSY MULTIMATE | 3 | |
| 58634 | PNEUMATIC BENCH VISE | 2 | |
| 58636 | PNEUMATIC BENCH VICE | 1 | |
| 58670 | PNEUMATIC FAST SAFETY COUPLING FEMALE 1/4" DUTCH TYPE | 1 | |
| 58671 | PNEUMATIC FAST SAFETY COUPLING MALE 1/4" DUTCH TYPE | 1 | |
| 58672 | PNEUMATIC FAST SAFETY COUPLING 10 MM HOSE-TAIL DUTCH TYPE | 1 | |
| 58673 | PNEUMATIC FAST SAFETY COUPLING FEMALE 1/4" SPANISH AND NORTH AMERICA TYPE | 1 | |
| 58674 | PNEUMATIC FAST SAFETY COUPLING MALE _x000D_ 1/4" SPANISH AND NORTH AMERICA TYPE | 1 | |
| 58675 | PNEUMATIC FAST SAFETY COUPLING 10 MM HOSE-TAIL SPANISH AND NORTH AMERICA TYPE | 1 | |
| 58676 | PNEUMATIC FAST SAFETY COUPLING FEMALE_x000D_ 1/4" GERMAN TYPE | 1 | |
| 58677 | PNEUMATIC FAST SAFETY COUPLING MALE _x000D_ 1/4" GERMAN TYPE | 1 | |
| 58678 | PNEUMATIC FAST SAFETY COUPLING 10 MM HOSE-TAIL GERMAN TYPE | 1 | |
| 58679 | PNEUMATIC FAST SAFETY COUPLING FEMALE_x000D_ 1/4" JAPANESE TYPE | 1 | |
| 58680 | PNEUMATIC FAST SAFETY COUPLING MALE _x000D_ 1/4" JAPANESE TYPE | 1 | |
| 58681 | PNEUMATIC FAST SAFETY COUPLING 10 MM HOSE-TAIL JAPANESE TYPE | 1 | |
| 58682 | PNEUMATIC HOSE REEL 1/4" - HOSE "-Ø OD. HOSE 3/8" -LENGHT 15 M | 1 | |
| 58869 | PNEUMATIC PISTOL TYPE TORQUE NUTRUNNER 3/8" (5-28 Nm) (3,69 - 20,65 Lb.ft) | 1 | |
| 58902 | PNEUMATIC ANGLE TORQUE NUTRUNNER 3/8" (1,2-2,4 Nm) (0,8-1,77 Lb.ft) | 1 | |
| 58903 | PNEUMATIC ANGLE TORQUE NUTRUNNER 3/8" (2,2-4,3 Nm) (1,62 - 3,17 Lb.ft) | 1 | |
| 58913 | PNEUMATIC ANGLE TORQUE NUTRUNNER 3/8" (4-10 Nm) (2,95 - 7,38 Lb.ft) | 1 | |
| 58914 | PNEUMATIC ANGLE TORQUE NUTRUNNER 1/2" (10-40 Nm) (7,38- 29,50 Lb.ft) | 1 | |
| 58922 | PNEUMATIC ANGLE TORQUE NUTRUNNER 1/2" (35 - 70 Nm) (25,81- 51,63 Lb.ft) | 1 | |
| 58990 | PNEUMATIC ANGLE DRILL 4000 RPM 0,3 HP THREAD 1/4" | 1 | |
| 58991 | PNEUMATIC ANGLE DRILL 45º 4000 RPM 0,3 HP THREAD 1/4" | 1 | |
| 58992 | PNEUMATIC ANGLE LONG DRILL 4000 RPM 0,3 HP THREAD 1/4" | 1 | |
| 58993 | PNEUMATIC ANGLE LONG DRILL 45º 4000 RPM 0,3 HP THREAD 1/4" | 1 | |
| 58994 | PNEUMATIC ANGLE DRILL 3600 RPM 0,5 HP THREAD 1/4" | 1 | |
| 58995 | PNEUMATIC ANGLE DRILL 45º 3600 RPM 0,5 HP THREAD 1/4" | 1 | |
| 58996 | PNEUMATIC ANGLE LONG DRILL 3600 RPM 0,5 HP THREAD 1/4" | 1 | |
| 58997 | PNEUMATIC ANGLE LONG DRILL 45º 3600 RPM 0,5 HP THREAD 1/4" | 1 | |
| 58998 | PNEUMATIC ANGLE DRILL 4000 RPM 0,3 HP -COLLECT | 1 | |
| 58999 | PNEUMATIC ANGLE DRILL 45º 4000 RPM 0,3 HP -COLLECT | 1 | |
| 59000 | PNEUMATIC ANGLE LONG DRILL 4000 RPM 0,3 HP -COLLECT | 1 | |
| 59001 | PNEUMATIC ANGLE LONG DRILL 45º 4000 RPM 0,3 HP -COLLECT | 1 | |
| 59002 | PNEUMATIC ANGLE DRILL 3600 RPM 0,5 HP -COLLECT | 1 | |
| 59003 | PNEUMATIC ANGLE DRILL 45º 3600 RPM 0,5 HP -COLLECT | 1 | |
| 59004 | PNEUMATIC ANGLE LONG DRILL 3600 RPM 0,5 HP -COLLECT | 1 | |
| 59005 | PNEUMATIC ANGLE LONG DRILL 45º 3600 RPM 0,5 HP -COLLECT | 1 | |
| 59006 | PNEUMATIC ANGLE DRILL 4000 RPM 0,3 HP -CHUCK 3 MM | 1 | |
| 59007 | PNEUMATIC ANGLE DRILL 45º 4000 RPM 0,3 HP -CHUCK 3 MM | 1 | |
| 59008 | PNEUMATIC ANGLE LONG DRILL 4000 RPM 0,3 HP -CHUCK 3 MM | 1 | |
| 59009 | PNEUMATIC ANGLE LONG DRILL 45º 4000 RPM 0,3 HP -CHUCK 3 MM | 1 | |
| 59010 | PNEUMATIC ANGLE DRILL 3600 RPM 0,5 HP -CHUCK 3 MM | 1 | |
| 59011 | PNEUMATIC ANGLE DRILL 45º 3600 RPM 0,5 HP -CHUCK 3 MM | 1 | |
| 59012 | PNEUMATIC ANGLE LONG DRILL 3600 RPM 0,5 HP -CHUCK 3 MM | 1 | |
| 59013 | PNEUMATIC ANGLE LONG DRILL 45º 3600 RPM 0,5 HP -CHUCK 3 MM | 1 | |
| 591200-31 | NIPPLE MATING HALF | 1 | |
| 591200-51 | COUPLER MATING HALF | 1 | |
| 5916778-1 | ADAPTER-PNEUMATIC SY | 6 | |
| 5916778-501 | PNEUMATIC SYSTEM AIRFLOW LIMITING TEST SET | 2 | |
| 5916784-1 | FIXTURE - STATIC PORT CONTOUR AND MISMATCH | 4 | |
| 5978A | 60000 RPM PNEUMATIC PENCIL GRINDER | 3 | |
| 5CE | Cyclo® Orbital Aircraft Polishers (Nominal diameter: 0.45 hp Pneumatic) (Rpm (no load): 3200) (Add to cart: Contact us to order) (Nominal diameter: 115V - 60 Hz) (Rpm (no load): 3200) (Add to cart: Contact us to order) (Nominal diameter: 230V - 50 Hz (CE | 1 | |
| 5JC24 | AEROSHELL 7 PNEUMATIC GUN | 1 | |
| 5LAN6 | RATCHET, PNEUMATIC, 1/2 IN DR, 65 FT-LB TORQUE, 20 | 1 | |
| 5RALC1 | SCREW DRIVER-PNEUMATIC | 1 | |
| 5RSAPT-10BQ | SCREWDRIVER-PNEUMATIC | 1 | |
| 5W4 | Milbar 5W4 9 Safety Twist Automatic Return Safety Wire Pliers | 1 | |
| 60-065 | SANDING GUN (PNEUMATIC) | 1 | |
| 60-310 | PNEUMATIC DRILL | 3 | |
| 600-058 | PNEUMATIC PLIERS | 8 | |
| 6000A | PNEUMATIC USQUEEZEU RIVET | 1 | |
| 6000A-1-1/2 | General Pneumatic Tandem Cylinder "A" Alligator Rivet Squeezer - 1-1/2" Yoke (MADE IN USA!) | 1 | |
| 6000A-2-1/4 | General Pneumatic Tandem Cylinder "A" Alligator Rivet Squeezer - 2-1/4" Yoke (MADE IN USA!) | 1 | |
| 6000A-3 | General Pneumatic Tandem Cylinder "A" Alligator Rivet Squeezer - 3" Yoke (MADE IN USA!) | 1 | |
| 6000C-1-1/2 | General Pneumatic Tandem Cylinder "C" Squeeze with 1-1/2" Reach Yoke (MADE IN USA!) | 1 | |
| 6000C-2 | General Pneumatic Tandem Cylinder "C" Squeeze with 2" Reach Yoke (MADE IN USA!) | 1 | |
| 6000C-3 | General Pneumatic Tandem Cylinder "C" Squeeze with 3" Reach Jaw (MADE IN USA!) | 1 | |
| 6000CS-6 | General Pneumatic Bench Mounted Riveter - 6" Yoke | 1 | |
| 6005KTQA1-103 | CONTROL UNIT - AIR DATA TEST SET, AUTOMATIC (MUST BE USED WITH VACUUM SOURCE OR PUMP UNIT 6201KTQ). | 1 | |
| 60195 | PRESSMATIC CCA 110 V 50 -60 HZ | 1 | |
| 60196 | PRESSMATIC PORTABLE CCA 220-240V 50-60 HZ | 1 | |
| 601R47505-15 | SHEET, ANTI-SLIP MATERIAL (RH) | 1 | |
| 60214 | PRESSMATIC MINI PORTABLE CCA 220-240V 50-60 Hz | 1 | |
| 60228 | PERFOMATIC-102 220-240V | 1 | |
| 60229 | PERFOMATIC - 102 110 V | 1 | |
| 60230 | PERFOMATIC - 205 220-240V WITH FIXED BRACKET | 1 | |
| 60231 | PERFOMATIC - 205 220-240V W/ 90º RECLINING BRACKET | 1 | |
| 60232 | PERFOMATIC - 205 220-240V WITH FIXED BRACKET AND VACUUM BASE | 1 | |
| 60233 | PERFOMATIC -205 220-240V W/ 90º RECLINING BRACKET AND VACUUM BASE | 1 | |
| 60234 | PERFOMATIC - 205 110 V WITH FIXED BRACKET | 1 | |
| 60235 | PERFOMATIC - 205 110 V W/ 90º RECLINABLE BRACKET | 1 | |
| 60236 | PERFOMATIC -205 110 V WITH VACUUM BASE | 1 | |
| 60237 | PERFOMATIC - 205 110 V W/ 90º RECLINABLE BRACKET AND VACUUM BASE | 1 | |
| 60238 | PERFOMATIC - 255 220-240V WITH FIXED BRACKET | 1 | |
| 60239 | PERFOMATIC - 255 220-240V WITH RECLINING BRACKET | 1 | |
| 60240 | PERFOMATIC - 255 220-240V WITH FIXED BRACKET AND VACUUM BASE | 1 | |
| 60241 | PERFOMATIC - 255 220-240V WITH 90º RECLINING BRACKET AND VACUUM BASE | 1 | |
| 60242 | PERFOMATIC - 255 110 V WITH FIXED BRACKET | 1 | |
| 60243 | PERFOMATIC - 255 110 V W/ 90º RECLINING BRACKET | 1 | |
| 60244 | PERFOMATIC - 255 110 V WITH VACUUM BASE | 1 | |
| 60245 | PERFOMATIC - 255 110 V WITH 90º RECLINABLE SUPPORT | 1 | |
| 60246 | PERFOMATIC -300 220-240V | 1 | |
| 60247 | PERFOMATIC - 300 220-240V WITH 90º RECLINING BRACKET | 1 | |
| 60248 | PERFOMATIC - 300 220-240V WITH FIXED BRACKET AND VACUUM BASE | 1 | |
| 60249 | PERFOMATIC - 300 220-240V WITH 90º RECLINING BRACKET AND VACUUM BASE | 1 | |
| 60250 | PERFOMATIC - 300 110 V | 1 | |
| 60251 | PERFOMATIC-300 110 V WITH 90º RECLINABLE BRACKET | 1 | |
| 60252 | PERFOMATIC - 300 110 V WITH FIXED BRACKET AND VACUUM BASE | 1 | |
| 60253 | PERFOMATIC - 300 110 V WITH 90º RECLINABLE BRACKET AND VACUUM BASE | 1 | |
| 60274 | REBARMATIC-16 PORTABLE | 1 | |
| 60295 | DRAINMATIC PORTABLE 75 110 V | 1 | |
| 60296 | DRAINMATIC PORTABLE 75 AUTO 220-240V | 1 | |
| 60297 | DRAINMATIC PORTABLE 75 AUTO 110 V | 1 | |
| 6061 AL BLOCK | Aluminum Block 110mm(3.937") x 18mm(7.09") x 15mm(.591") Block. Material: 6061-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 60C20 | PNEUMATIC C SQUEEZER ATLANTIC AIR TOOL | 1 | |
| 60C25 | ATLANTIC AIR TOOL PNEUMATIC C SQUEEZER | 1 | |
| 60CH15 | PNEUMATIC C SQUEEZER | 1 | |
| 61-860 | Pocket Automatic Center Punch (Description: Tool with Centering Point) (Add to cart: Add To Cart) | 1 | |
| 615/615A | LOADING CABLE PMAT XS | 1 | |
| 615A | PMAT KIT | 1 | |
| 619960-257 | PUNCH AUTOMATIC PUNCH | 1 | |
| 6200 | Automated Pitot Static Teste | 5 | |
| 6210 | RESPIRATOR REGULATOR MATING COUPLING THREADED TYPE | 1 | |
| 6210-00 | RESPIRATOR REGULATOR MATING CONNECTOR | 2 | |
| 621200-1 | CRIMP TOOL, HEX PNEUMATIC (KINGS DIES) | 1 | |
| 621200-2 | CRIMP TOOL, HEX PNEUMATIC (MEDTRONIC) | 1 | |
| 818 | STARRETT® 5" Automatic Center Punch - USA MADE! | 1 | |
| 875.199450 | PNEUMATIC RATCHET WRENCH | 1 | |
| 6270 | RVSM AUTOMATED PITOT STATIC TESTER (FOR ALL AIRCRAFT) | 3 | |
| 6300 | Automated Pitot Static Tester | 10 | |
| 6520 | SWAGER - POWER, STATIONARY AUTOMATIC | 1 | |
| 6600 | Automated Pitot Static Tester | 2 | |
| 6777 | SEMI-AUTOMATIC ROLLER SWAGE MACHINE (1/4" TO 1 1/2" TUBE SIZE) (STANLEY HARRISON CORP.) | 1 | |
| 7092 | HOSE - PNEUMATIC | 1 | |
| 7310 | High Pressure Pneumatic Controller / Test Set | 7 | |
| 7658 | PNEUMATIC DRILL | 1 | |
| 8142 | COPPER WIRE (LINDST ESTIMATE) | 5 | |
| 8920 | AXLE JACK 90 T (99 US SHORT TONS) HPA WITH PNEUMATIC SUPPORT AND HANDPUMP J-AXLE90AHPA | 2 | |
| 9113 | HYDRO-PNEUMATIC POSITIONNER | 1 | |
| 62074 | LINESMAN'S PLIER 250 MM (10") POLISHED BIMAT | 1 | |
| 62241 | COMBINATION ELECTRONIC PLIER 125 MM (5") TITACROM® BIMAT. | 1 | |
| 62242 | FLAT NOSE ELECTRONIC PLIER 125 MM (5") TITACROM® BIMAT. | 1 | |
| 62243 | ROUND NOSE ELECTRONIC PLIER 125 MM (5") TITACROM® BIMAT | 1 | |
| 62244 | LONG NOSE ELECTRONIC PLIER 125 MM (5")TITACROM® BIMAT | 1 | |
| 62245 | BENT NOSE ELECTRONIC PLIER 125 MM (5") TITACROM® BIMAT | 1 | |
| 62246 | LONG NEEDLE NOSE ELECTRONIC PLIER 150 MM (6") TITACROM® BIMAT | 1 | |
| 62247 | DIAGONAL CUTTING MINI PLIER 115 MM (4") TITACROM® BIMAT | 1 | |
| 62248 | DIAGONAL CUTTING TRIANGULAR ELECTRONIC PLIER 115 MM (4") TITACROM® BIMAT | 1 | |
| 62249 | END CUTTER ELECTRONIC PLIER 110 MM 110 MM (4") TITACROM® BIMAT. | 1 | |
| 62297 | BOX JOINT PLIER 10" TITACROM® BIMAT | 1 | |
| 62298 | BOX JOINT PLIER 12" TITACROM® BIMAT | 1 | |
| 62299 | DIAGONAL CUTTING PLIER MASTERCUT 160 MM (6") TITACROM® BIMAT | 1 | |
| 62300 | H.D. CUTTING NIPPERS MASTERCUT 180 MM (7") TITACROM® BIMAT | 1 | |
| 62330 | DISPLAY 36 PC PLIERS TITACROM® BIMAT | 1 | |
| 62331 | COMBINATION PLIER 165 MM (6") TITACROM® BIMAT | 1 | |
| 62332 | COMBINATION PLIER 180 MM (7") TITACROM® BIMAT. | 1 | |
| 62333 | COMBINATION PLIER 200 MM (8") TITACROM® BIMAT. | 1 | |
| 62337 | FLAT NOSE PLIER 160 MM (6") TITACROM® BIMAT. | 1 | |
| 62338 | ROUND NOSE PLIER 160 MM (6") TITACROM® BIMAT. | 1 | |
| 62339 | LONG NOSE PLIER 160 MM (6") TITACROM® BIMAT. | 1 | |
| 62340 | LONG NOSE PLIER 200 MM (8") TITACROM® BIMAT. | 1 | |
| 62341 | BENT NOSE PLIER 160 MM (6") TITACROM® BIMAT. | 1 | |
| 62342 | BENT NOSE PLIER 200 MM (8") TITACROM® BIMAT. | 1 | |
| 62343 | DIAGONAL CUTTING PLIER 160 MM (6") TITACROM® BIMAT. | 1 | |
| 62344 | H.D. CUTTING PLIER 180 MM (7") TITACROM® BIMAT. | 1 | |
| 62345 | END CUTTING PLIER 160 MM (6") TITACROM® BIMAT. | 1 | |
| 62346 | END CUTTING PLIER (ELECTRICIAN) 160 MM (6") TITACROM® BIMAT. | 1 | |
| 62348 | END CUTTING PLIER (ELECTRICIAN) 200 MM (8") TITACROM® BIMAT. | 1 | |
| 62349 | WIRESTRIPPER PLIER 160 MM (6") TITACROM® BIMAT. | 1 | |
| 62350 | DIAGONAL CUTTING PLIER MASTERCUT 190 MM (7") TITACROM® BIMAT. | 1 | |
| 62370 | H.D. DIAGONAL CUTTING PLIER 200 MM (8") TITACROM® BIMAT. | 1 | |
| 62441 | MASTERMATIC- 2 PRO 220-240V-50 HZ. | 1 | |
| 62442 | MASTERMATIC- 2 PRO 110V-60 HZ. | 1 | |
| 62443 | MASTERMATIC-2 PRO 1/2 - 2" BSPT 220-240V | 1 | |
| 62444 | MASTERMATIC-2 PRO 3/8 - 2" BSPT 220-240V | 1 | |
| 62445 | GROOVE JOINT PLIER 8" TITACROM® BIMAT | 1 | |
| 62446 | GROOVE JOINT PLIER 10" TITACROM® BIMAT | 1 | |
| 62447 | GROOVE JOINT PLIER 12" TITACROM® BIMAT | 1 | |
| 62449 | MASTERMATIC-2 PRO 1/4" - 2" BSPT 220 - 240 V | 1 | |
| 62450 | COMBINATION PLIER 160 MM (6") POLISHED BIMAT. | 1 | |
| 62451 | COMBINATION PLIER180 MM (7") POLISHED BIMAT | 1 | |
| 62452 | COMBINATION PLIER 200 MM (8") POLISHED BIMAT | 1 | |
| 62453 | FLAT NOSE PLIER 160 MM (6") POLISHED BIMAT | 1 | |
| 62454 | ROUND NOSE PLIER 160 MM (6") POLISHED BIMAT | 1 | |
| 62456 | LONG NOSE PLIER 200 MM (8")POLISHED BIMAT | 1 | |
| 62458 | BENT NOSE PLIER 200 MM (8") POLISHED BIMAT | 1 | |
| 62459 | DIAGONAL CUTTING PLIER 160 MM (6") POLISHED BIMAT. | 1 | |
| 62460 | H.D.CUTTING NIPPERS 180 MM POLISHED BIMAT | 1 | |
| 62464 | MASTERMATIC-2 PRO 1/2 - 2" NPT 220-240V | 1 | |
| 62479 | COMBINATION PLIER MASTERCUT 210 MM (8") TITACROM® BIMAT. | 1 | |
| 62480 | COMBINATION PLIER MASTERCUT 235 MM (9") TITACROM® BIMAT. | 1 | |
| 62495 | COMBINATION PLIER MASTERCUT 165 MM (6") TITACROM® BIMAT. | 1 | |
| 62496 | COMBINATION PLIER MASTERCUT 180 MM (7) TITACROM® BIMAT. | 1 | |
| 62498 | LONG NOSE PLIER MASTERCUT 160 MM (6") TITACROM® BIMAT. | 1 | |
| 62499 | LONG NOSE PLIER MASTERCUT 200 MM (8") TITACROM® BIMAT. | 1 | |
| 6250-W | AUTOMATED PITOT STATIC TESTER | 1 | |
| 62500 | BENT NOSE PLIER MASTERCUT 160 MM (6") TITACROM® BIMAT. | 1 | |
| 62501 | BENT NOSE PLIER MASTERCUT 200 MM (8") TITACROM® BIMAT. | 1 | |
| 62523 | COMBINATION ELECTRICIAN PLIER 125 MM (5") BLACK CHROME PLATING BIMAT | 1 | |
| 62525 | ROUND NOSE ELECTRICIAN PLIER 125 MM (5") BLACK CHROME PLATING BIMAT | 1 | |
| 62527 | BENT NOSE ELECTRICIAN PLIER 125 MM (5") BLACK CHROME PLATING BIMAT | 1 | |
| 62528 | LONG NEEDLE NOSE ELECTRICIAN PLIER150 MM (6") BLACK CHROME PLATING BIMAT | 1 | |
| 6252T681 | TOOLINGS AND COMPONENTS MAT | 1 | |
| 62540 | DIAGONAL CUTTING PLIER 190 MM (7") TITACROM® BIMAT. | 1 | |
| 62598 | H.D. CUTTING NIPPERS MASTERCUT 200 MM (8") TITACROM® BIMAT. | 1 | |
| 62602 | AUTOMATIC PLIER FOR PLASTIC CABLE-TIES 2,2 - 4,8 MM | 1 | |
| 6270-EB | AUTOMATED PITOT STATIC TESTER | 1 | |
| 62739 | MASTERMATIC-2 PRO 3/8" - 2" NPT 220 - 240 V | 1 | |
| 62771 | MASTERMATIC-2 PRO 1/4" - 2" NPT 220 - 240 V | 1 | |
| 62791 | MASTERMATIC-2 PRO 1/2 - 2" BSPT 110V | 1 | |
| 62792 | MASTERMATIC-2 PRO 3/8 - 2" BSPT 110 V | 1 | |
| 62797 | MASTERMATIC-2 PRO 1/4" - 2" BSPT 110 V | 1 | |
| 628-8848-002 | GPS-4000 MATING CONNECTOR KIT RG-142B/RG-400 | 2 | |
| 62815 | MASTERMATIC-2 PRO 1/2 - 2" NPT 110 V | 1 | |
| 62820 | MASTERMATIC-2 PRO 3/8" - 2" NPT 110 V | 1 | |
| 62827 | MASTERMATIC-2 PRO 1/4" - 2" NPT 110 V | 1 | |
| 6300 RVSM | AUTOMATED PITOT SIMULATOR TESTER; WITH REMOTE RVSM COMPLIANT P/N 6300 RVSM MANUFACTURER: LAVERSAB INC | 1 | |
| 6300 Rev E6 | Laversab Air Data Test Set, 2Pt 2Ps, Automated, RVSM | 1 | |
| 6300-L | 6300 - Legacy - Automated Pitot Static Tester (RVSM) | 4 | |
| 6300-W | AUTOMATED PITOT STATIC TESTER (RVSM) - WITH WIFI | 3 | |
| 6300REVE6 | LAVERSAB AIR DATA TEST SET, 2PT 2PS, AUTOMATED, RV | 1 | |
| 6300W | AUTOMATIC PITOT STATIC TESTER | 3 | |
| 63081 | CUTTING WHEEL FOR AUTOMATIC TUBE CUTTER 67 MM (PLASTIC) REF.63108 | 1 | |
| 63108 | AUTOMATIC TUBE CUTTER 67 MM (PLASTIC) | 1 | |
| 63173 | AUTOMATIC TUBE CUTTER 127 MM (PLASTIC) | 1 | |
| 63201 | AUTOMATIC PLASTIC PIPE CUTTER 35 MM | 1 | |
| 63202 | AUTOMATIC PLASTIC PIPE CUTTER 42 MM | 1 | |
| 63365 | AUTOMATIC TUBE CUTTER 50 MM (PLASTIC) | 1 | |
| 63720 | CUTTING WHEEL FOR COPPER (AUTOMATIC TUBE CUTTER 50) | 1 | |
| 63722 | CUTTING WHEEL FOR PLASTIC FOR AUTOMATIC TUBE CUTTER 50 MM | 1 | |
| 63801-8901 | Crimp Adapter For DIN style dies In Molex 63801-8900 Pneumatic Crimp Machine | 1 | |
| 63801-8902 | Crimp Adapter for 35mm wide U-Dies in Molex 63801-8900 Pneumatic Crimp Machine | 1 | |
| 63801-8903 | Crimp Adapter for 22mm wide U-Dies in Molex 63801-8900 Pneumatic Crimp Machine | 1 | |
| 63825-1200 | Hand Crimp Tool for 1.50mm (.059") Pitch CLICK-Mate™ Wire-to-Board Crimp Terminal | 2 | |
| 63825-3000 | Hand Crimp Tool For IllumiMate™ Crimp Terminal | 1 | |
| 63827-1000 | Hand Crimp Tool for IllumiMate™ 1.25mm Wire-to-Board Crimp Terminals | 1 | |
| 63827-2300 | Hand Crimp Tool for IllumiMate™ 1.25mm Wire-to-Board Crimp Terminals | 1 | |
| 63827-2900 | Hand Tool for Appli-Mate RAST2.5, RAST Signal, and R-Power Connectors | 1 | |
| 63827-6300 | Hand Tool for Appli-Mate RAST5 Connectors | 1 | |
| 63865 | AUTOMATIC WIRE STRIPPER 0,5/1,2/1,6/2,0 MM | 1 | |
| 63866 | AUTOMATIC WIRE STRIPPER 1,0/1,6/2,0/2,6/3,2 MM | 1 | |
| 63867 | AUTOMATIC WIRE STRIPPER 0,9/1,25/2,0/3,5/5,5 MM | 1 | |
| 63870 | BLADES FOR AUTOMATIC WIRE STRIPPER 0,5/1,2/1,6/2,0 MM | 1 | |
| 63871 | BLADES FOR AUTOMATIC WIRE STRIPPER 1,0/1,6/2,0/2,6/3,2 MM | 1 | |
| 63872 | BLADES FOR AUTOMATIC WIRE STRIPPER 0,9/1,25/2,0/3,5/5,5 MM | 1 | |
| 63AAA040 | Mitutoyo 63AAA040 Digimatic Interface DMX-1 USB 1x Digimatic Input, VCP | 1 | |
| 64004 | BLADE FOR AUTOMATIC PLASTIC PIPE CUTTER 35 MM REF. 63201 | 1 | |
| 64005-0100 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-0185 | Special Crimp Head Locator for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-0190 | Special Crimp Head Locator for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-0200 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-0300 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-0400 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-0500 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-0600 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-0800 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-0900 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-1100 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-1800 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-1900 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-2100 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-2300 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-2400 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-2500 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-2600 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-2800 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-3400 | Crimp Head for the AT-200™ Pneumatic Hand Tool, Crimp from Top | 1 | |
| 64005-3500 | Crimp Head for the AT-200™ Pneumatic Hand Tool, Crimp from Top | 1 | |
| 64005-3600 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-4100 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-4300 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-4500 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-4600 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-4700 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-4900 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-5000 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-5100 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-5200 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-5400 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-5500 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-5900 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-6300 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-6400 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-6600 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-6700 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64005-6800 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64007-0100 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64007-0200 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64007-0400 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64007-0500 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64007-0800 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64007-1100 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64007-1200 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64007-1300 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64007-3000 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64007-3100 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64007-4300 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64007-4400 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64007-7100 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64007-7200 | Crimp Head for the AT-200™ Pneumatic Hand Tool | 1 | |
| 64034 | CUTTING WHEEL FOR AUTOMATIC PLASTIC PIPE CUTTER 63202 | 1 | |
| 64104 | CUTTING WHEEL OF THE ROSCAMATIC PIPE CUTTER | 1 | |
| 64105 | CUTTING WHEEL FOR AUTOMATIC TUBE CUTTER 127 MM (PLASTIC) REF-63173 | 1 | |
| 64148 | DIES 1/4-3/8" BSPT FOR ROSCAMATIC-2" (4 PCS) | 1 | |
| 64149 | DIES 1/2-3/4" BSPT FOR ROSCAMATIC-2" (4 PCS) | 1 | |
| 64151 | DIES 1/4-3/8"BSPT (HSS) FOR ROSCAMATIC-2" (4 PCS) | 1 | |
| 64152 | DIES 1/2-3/4" BSPT (HSS) ROSCAMATIC-2" (4 PCS) | 1 | |
| 64153 | DIES 1-2" BSPT (HSS) FOR ROSCAMATIC-2" (4 PCS) | 1 | |
| 64154 | DIES 1/4-3/8" NPT FOR ROSCAMATIC-2" (4 PCS) | 1 | |
| 64155 | DIES 1/2-3/4" NPT FOR ROSCAMATIC-2" (4 PCS) | 1 | |
| 64157 | DIES 1/4-3/8" NPT (HSS) FOR ROSCAMATIC-2" (4 PCS) | 1 | |
| 64158 | DIES 1/2-3/4" NPT (HSSROSCAMATIC-2" (4 PCS) | 1 | |
| 64159 | DIES 1-2" NPT (HSS) FOR ROSCAMATIC-2" (4 PCS) | 1 | |
| 64180 | DIES M10 (HSS) FOR ROSCAMATIC 2 & 4" (4 PCS) | 1 | |
| 64181 | DIES M12 (HSS) FOR ROSCAMATIC 2 & 4" (4 PCS) | 1 | |
| 64182 | DIES M14-M16 (HSS) FOR ROSCAMATIC 2 & 4" (4 PCS) | 1 | |
| 64183 | DIES M18-M22 (HSS) FOR ROSCAMATIC 2 & 4" (4 PCS) | 1 | |
| 64184 | DIES M24-M27 (HSS) FOR ROSCAMATIC 2 & 4" (4 PCS) | 1 | |
| 64186 | DIES M30-M33 (HSS) FOR ROSCAMATIC-2 & 4" (4 PCS) | 1 | |
| 64187 | DIES M36-M40 (HSS) FOR ROSCAMATIC-2 & 4" (4 PCS) | 1 | |
| 64188 | DIES M42-M45 x 4,5 HSS FOR ROSCAMATIC -2 & 4" (4 PCS) | 1 | |
| 64189 | DIES M48-M50 & M52 x 5 HSS FOR ROSCAMATIC- 2 & 4" (4 PCS) | 1 | |
| 64205 | DIES 1/2"- 3/4" BSPT FOR ROSCAMATIC- 3 & 4" (4 PCS) | 1 | |
| 64207 | DIES 2.1/2-3" BSPT FOR ROSCAMATIC- 3" (4 PCS) | 1 | |
| 64208 | DIES 2.1/2"-4" BPST FOR ROSCAMATIC-4" (4 PCS) | 1 | |
| 64209 | DIES 1/2"-3/4" BSPT (HSS) FOR ROSCAMATIC-3" & 4" (4 PCS) | 1 | |
| 64210 | DIES 1"-2" BSPT (HSS) FOR ROSCAMATIC-3" & 4" (4 PCS) | 1 | |
| 64211 | DIES 2.1/2"-3" BSPT (HSS) FOR ROSCAMATIC-3" (4 PCS) | 1 | |
| 64212 | DIES 2.1/2"-4" BSPT (HSS) ROSCAMATIC -4" (4 PCS) | 1 | |
| 64213 | DIES 1/2"-3/4" NPT FOR ROSCAMATIC -3" & 4" (4 PCS) | 1 | |
| 64214 | DIES 1"-2" NPT FOR ROSCAMATIC -3" & 4" (4 PCS) | 1 | |
| 64215 | DIES 2.1/2"-3" NPT FOR ROSCAMATIC -3" (4 PCS) | 1 | |
| 64216 | DIES 2.1/2" -4" NPT FOR ROSCAMATIC-4" (4 PCS) | 1 | |
| 64217 | DIES 1/2"-3/4" NPT (HSS) FOR ROSCAMATIC-3" & 4" (4 PCS) | 1 | |
| 64218 | DIES 1"-2" NPT (HSS) FOR ROSCAMATIC-3" & 4" (4 PCS) | 1 | |
| 64219 | DIES 2.1/2"-3" NPT (HSS) FOR ROSCAMATIC-3" (4 PCS) | 1 | |
| 64220 | DIES 2.1/2"-4" NPT (HSS) ROSCAMATIC-4" (4 PCS) | 1 | |
| 64398 | FIXED BRACKET FOR PERFOMATIC | 1 | |
| 64399 | RECLINING BRACKET FOR PERFOMATIC | 1 | |
| 64400 | VACUUM PAD AND PUMP FOR PERFOMATIC | 1 | |
| 64408 | HANDLE FOR PERFOMATIC | 1 | |
| 64410 | PUMP FOR PERFOMATIC VACUUM BASE | 1 | |
| 64415 | EXTENSION 1/2" BSP 31 X 260 FOR PERFOMATIC | 1 | |
| 64426 | ADAPTOR 1.1/4" UNC (FEMALE) - 1/2" BSP (FEMALE) FOR PERFOMATIC | 1 | |
| 64495 | DIES 1/4"- 3/8" BSPP FOR ROSCAMATIC -2" & 4" (4 PCS) | 1 | |
| 64496 | DIES 1/2"- 3/4" BSPP FOR ROSCAMATIC -2" & 4" (4 PCS) | 1 | |
| 64497 | DIES 1"- 2" BSPP FOR ROSCAMATIC -2" & 4" (4 PCS) | 1 | |
| 64498 | DIES 1/4"- 3/8" BSPP (HSS) FOR ROSCAMATIC-2" & 4" (4 PCS) | 1 | |
| 64499 | DIES 1/2"- 3/4" BSPP (HSS) FOR ROSCAMATIC-2" & 4" (4 PCS) | 1 | |
| 64500 | DIES 1"- 2" BSPP (HSS) FOR ROSCAMATIC-2" & 4" (4 PCS) | 1 | |
| 64643 | BUMPER FOR DRAINMATIC MAX 600 60286-60287 | 2 | |
| 64692 | SET OF BLADES FOR REBARMATIC 16 PORTABLE | 1 | |
| 64770 | DIES 1/4" (20 TPI) UNC-HSS FOR ROSCAMATIC-2 & 4" (4 PCS) | 1 | |
| 64771 | DIES 5/16" (18 TPI) UNC-HSS FOR ROSCAMATIC-2 & 4" (4 PCS) | 1 | |
| 64772 | DIES 3/8" (16 TPI) UNC-HSS FOR ROSCAMATIC-2 & 4" (4 PCS) | 1 | |
| 64773 | DIES 7/16" (14 TPI) UNC-HSS FOR ROSCAMATIC-2 & 4" (4 PCS) | 1 | |
| 64774 | DIES 1/2" (13 TPI) UNC-HSS FOR ROSCAMATIC-2 & 4" (4 PCS) | 1 | |
| 64775 | DIES 9/16" (12 TPI) UNC-HSS FOR ROSCAMATIC-2 & 4" (4 PCS) | 1 | |
| 64776 | DIES 5/8" (11 TPI) UNC-HSS FOR ROSCAMATIC-2 & 4" (4 PCS) | 1 | |
| 64777 | DIES 3/4" (10 TPI) UNC-HSS FOR ROSCAMATIC-2 & 4" (4 PCS) | 1 | |
| 64778 | DIES 7/8" (9 TPI) UNC-HSS FOR ROSCAMATIC-2 & 4" (4 PCS) | 1 | |
| 64779 | DIES 1" (8 TPI) UNC-HSS FOR ROSCAMATIC-2 & 4" (4 PCS) | 1 | |
| 64780 | DIES 1.1/8" (7 TPI) UNC-HSS FOR ROSCAMATIC-2 & 4" (4 PCS) | 1 | |
| 64781 | DIES 1.1/4" (7 TPI) UNC-HSS FOR ROSCAMATIC-2 & 4" (4 PCS) | 1 | |
| 64782 | DIES 1.3/8" (6 TPI) UNC-HSS FOR ROSCAMATIC-2 & 4" (4 PCS) | 1 | |
| 64783 | DIES 1.1/2" (6 TPI) UNC-HSS FOR ROSCAMATIC-2 & 4" (4 PCS) | 1 | |
| 64784 | DIES 1.3/4" (5 TPI) UNC-HSS FOR ROSCAMATIC-2 & 4" (4 PCS) | 1 | |
| 64785 | DIES 2" (4.1/2" TPI) UNC-HSS FOR ROSCAMATIC-2 & 4" (4 PCS) | 1 | |
| 64AAB387 | Mitutoyo 64AAB387 4 Port Digimatic Multiplexer | 1 | |
| 64PKA076 | Digimatic Measurement Kits (Description: Measurement Kit with Ratchet Micrometer) (Add to cart: Add To Cart) | 1 | |
| 64PKA077 | Digimatic Measurement Kits (Description: Measurement Kit with Ratchet Micrometer) (Add to cart: Add To Cart) (Description: Measurement Kit with Friction Thimble Micrometer) (Add to cart: Add To Cart) | 2 | |
| 65-1AP | PNEUMATIC 65TONNE JACK | 1 | |
| 65163 | MEASURING TAPE INOX BIMAT NYLON MATT 5 M X 19 MM | 1 | |
| 65164 | MEASURING TAPE ROBUST BIMAT NYLON MATT 3 M X 19 MM | 1 | |
| 65165 | MEASURING TAPE ROBUST BIMAT NYLON MATT 5 M X 25 MM | 1 | |
| 65166 | MEASURING TAPE ROBUST BIMAT NYLON MATT 8 M X 30 MM | 3 | |
| 65167 | MEASURING TAPE ROBUST MAGNET BIMAT NYLON MATT 5 M X 25 MM | 1 | |
| 65171 | MEASURING TAPE RALLYE BIMAT 2 STOPS URAR MATT 2 M X 16 MM | 1 | |
| 65172 | MEASURING TAPE RALLYE BIMAT 2 STOPS URAR MATT 3 M X 16 MM | 1 | |
| 65173 | MEASURING TAPE RALLYE BIMAT 2 STOPS URAR MATT 5 M X19 MM | 1 | |
| 65174 | MEASURING TAPE RALLYE BIMAT 2 STOPS URAR MATT 8 M X 25 MM | 1 | |
| 65176 | LONG STEEL TAPE BIMAT 20 M X 13 MM | 1 | |
| 65177 | LONG STEEL TAPE BIMAT 30 M X 13 MM | 1 | |
| 65178 | LONG FIBERGLASS TAPE BIMAT 10 M X 13 MM | 1 | |
| 65179 | LONG FIBERGLASS TAPE BIMAT 20 M X 13 MM | 1 | |
| 65180 | LONG FIBERGLASS TAPE BIMAT 30 M X 13 MM | 1 | |
| 65181 | LONG FIBERGLASS TAPE BIMAT 50 M X 13 MM | 2 | |
| 65182 | TANK DIPPING TAPE BIMAT 10 M/ 13 MM (BLACK TAPE) | 1 | |
| 65184 | TANK DIPPING TAPE BIMAT 30 M/ 13 MM (BLACK TAPE) | 1 | |
| 65185 | STEEL TAPE PISTOL TYPE BIMAT 10 M X 13 MM | 2 | |
| 65186 | STEEL TAPE PISTOL TYPE BIMAT 20 M X 13 MM | 1 | |
| 65187 | STEEL TAPE PISTOL TYPE BIMAT 30 M X 13 MM | 1 | |
| 65188 | STEEL TAPE PISTOL TYPE BIMAT 50 M / 13 MM | 1 | |
| 6524-0001-00 | LITEMATE PHOTOMETER PR-524 | 1 | |
| 65355 | MEASURING TAPE INOX BIMAT NYLON MATT 3 M/10' X 16 MM (mm/inch) | 1 | |
| 65356 | MEASURING TAPE INOX BIMAT NYLON MATT 5 M/16' X 19 MM (mm/inch) | 1 | |
| 65357 | MEASURING TAPE ROBUST BIMAT NYLON MATT 3 M/10' X 19 MM (mm/inch) | 1 | |
| 65358 | MEASURING TAPE ROBUST BIMAT NYLON MATT 5 M/16' X 25 MM (mm/inch) | 1 | |
| 65359 | MEASURING TAPE ROBUST BIMAT NYLON MATT 8 M/26' X 30 MM (mm/inch) | 1 | |
| 65360 | MEASURING TAPE ROBUST MAGNET BIMAT NYLON MATT 5 M/16' X 25 MM (mm/inch) | 1 | |
| 65361 | MEASURING TAPE RALLYE BIMAT URAR 2 STOPS 2 M/6' X 16 MM (mm/inch) | 1 | |
| 65362 | MEASURING TAPE RALLYE BIMAT URAR 2 STOPS 3 M/10' X 16 MM (mm/inch | 1 | |
| 65363 | MEASURING TAPE RALLYE BIMAT URAR 2 STOPS 5 M/16' X 19 MM (mm/inch) | 1 | |
| 65364 | MEASURING TAPE RALLYE BIMAT URAR 2 STOPS 8 M/26' X 25 MM (mm/inch) | 1 | |
| 65365 | LONG FIBERGLASS TAPE BIMAT 10 M/33' X 13 MM (mm/inch) | 1 | |
| 65367 | LONG FIBERGLASS TAPE BIMAT 30 M/100' X 13 MM (mm/inch) | 1 | |
| 65368 | LONG FIBERGLASS TAPE BIMAT 50 M/165' X 13 MM (mm/inch) | 1 | |
| 65375AB351M | CLE A ERGOTS LIAISION MAT/VOILURE LUG WRENCH-PYLON-TO-WING JUNCTION | 1 | |
| 65455-101 | PNEUMATIC BENCH VISE | 2 | |
| 65707 | MEASURING TAPE PLATINUM Q BIMAT MATT NYLON 5 M X 19 MM | 1 | |
| 65708 | MEASURING TAPE PLATINUM Q BIMAT MATT NYLON 8 M X 25 MM | 1 | |
| 65710 | MEASURING TAPE PLATINUM Q MAGNET BIMAT MATT NYLON 8 M X 25 MM | 1 | |
| 65721 | MEASURING TAPE PLATINUM Q BIMAT MATT NYLON 3M /10" X 16 MM | 1 | |
| 65723 | MEASURING TAPE PLATINUM Q BIMAT MATT NYLON 8 M/26" X 25 MM | 1 | |
| 65725 | MEASURING TAPE PLATINUM Q MAGNET BIMAT MATT NYLON 8 M/26" X 25 MM | 1 | |
| 6583103-1 | Cessna Model 500 Calibration Standard 53-30-03-0 Rev. 14 Figure 4 Sheet 1 Inspection. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 65B67954-63SP | UPR MATTRESS ASSY | 1 | |
| 65C37849 -42 | TOP KIT - PITOT TUBE AUTOMATION REPLACEMENT | 1 | |
| 65C37849-34 | TOP KIT - PITOT TUBE AUTOMATION REPLACEMENT | 1 | |
| 65C37849-37 | TOP KIT PITOT TUBE AUTOMATION REPLACEMENT | 1 | |
| 65C37849-41 | TOP KIT - PITOT TUBE AUTOMATION REPLACEMENT | 1 | |
| 65C37849-42 | TOP KIT - PITOT TUBE AUTOMATION REPLACEMENT | 1 | |
| 65C37849-43 | TOP KIT PITOT TUBE AUTOMATION REPLACEMENT | 1 | |
| 6600-NG | 6600 - WIFI - Automated Pitot Static Tester (RVSM) - 3 Outputs | 7 | |
| 6600NG | 6600 - WIFI - AUTOMATED PITOT STATIC TESTER (RVSM) - 3 OUTPUTS | 7 | |
| 66122 | DISSIPATIVE DUAL LAYER RUBBER MAT | 1 | |
| 66264 | MAGNETIC BIT HOLDER 75 MM INOX (AUTOMATIC PULL TYPE) | 1 | |
| 66850 | SCREWDRIVER PHILLIPS PH-00 MICROTRONIC BIMAT. | 1 | |
| 66851 | SCREWDRIVER PHILLIPS PH-0 MICROTRONIC BIMAT. | 1 | |
| 66852 | SCREWDRIVER PHILLIPS PH-1 MICROTRONIC BIMAT. | 1 | |
| 66853 | POZIDRIV SCREWDRIVER PZ-0 MICROTRONIC BIMAT. | 1 | |
| 66854 | POZIDRIV SCREWDRIVER PZ-1 MICROTRONIC BIMAT. | 1 | |
| 66863 | HEXAGONAL BALL POINT SCREWDRIVER 2 X 50 MM MICROTRONIC BIMAT | 1 | |
| 66864 | HEXAGONAL BALL POINT SCREWDRIVER 2,5 X 50 MM MICROTRONIC BIMAT. | 1 | |
| 66865 | HEXAGONAL BALL POINT SCREWDRIVER 3 X 60 MM MICROTRONIC BIMAT. | 1 | |
| 66866 | SCREWDRIVER TAMPER TORX TT-6 MICROTRONIC BIMAT. | 1 | |
| 66867 | SCREWDRIVER TAMPER TORX TT-7 MICROTRONIC BIMAT. | 1 | |
| 66868 | SCREWDRIVER TAMPER TORX TT-8 MICROTRONIC BIMAT. | 1 | |
| 66869 | SCREWDRIVER TAMPER TORX TT-9 MICROTRONIC BIMAT. | 1 | |
| 66870 | SCREWDRIVER TAMPER TORX TT-10 MICROTRONIC BIMAT. | 1 | |
| 66871 | SCREWDRIVER TAMPER TORX TT-15 MICROTRONIC BIMAT. | 1 | |
| 66872 | SCREWDRIVER TAMPER TORX TT-20 MICROTRONIC BIMAT. | 1 | |
| 679304-1 | PNEUMATIC HEAD ASSEMBLY | 2 | |
| 68236 | CENTRAL PNEUMATIC 17 PIECE AIR TOOL ACCESSORY KIT | 1 | |
| 68475 | SET OF 3 PLIERS TITACROM ® BIMAT. IN ZIPPER CASE | 1 | |
| 68476 | SET OF 3 PLIERS TITACROM ® BIMAT AND GROOVE JOINT PLIER 10" IN ZIPPER CASE | 1 | |
| 68477 | SET 3 PLIERS TITACROM ® BIMAT IN ZIPPER CASE | 1 | |
| 68478 | SET-3 PLIERS TITACROM ® BIMAT AND TOWER PINCER IN ZIPPER CASE | 1 | |
| 69010 | Pneumatic Crimp Tool | 2 | |
| 69015 | PNEUMATIC TOOL | 4 | |
| 69064 | CRIMP TOOL - POWER, PNEUMATIC | 2 | |
| 69199 | CHERRY G83A PNEUMATIC RIVETER | 1 | |
| 69325-3 | CRIMP TOOL - POWER, PNEUMATIC | 1 | |
| 69434 | SET OF 3 ELECTRONIC PLIERS TITACROM ® BIMAT. | 1 | |
| 6A | PNEUMATIC SHRINKER/ STRETCHER | 1 | |
| 6C373 | PHOTO AVIONICS MATER SET | 1 | |
| 6Q1D1 | PNEUMATIC TEST KIT | 1 | |
| 6SF7374-51 | PNEUMATIC TESTER KIT | 1 | |
| 6SF7682-501 | Pneumatic Tester | 1 | |
| 70-625 | PLEWS-LUBRIMATIC SWIVEL FILTER WRENCH: FOR 3 1/2 IN TO 3 7/8 IN OUTSIDE DIA | 1 | |
| 700HPPK-NPT | PNEUMATIC TEST PUMP KIT | 1 | |
| 70121 | USATCO Panel Saws (Rpm: 2200) (Material capacity: 16 Gauge Mild Steel) (Blade capacity: 2-1/2") (Depth of cut: 5/8") (Add to cart: Add To Cart) | 1 | |
| 70122 | USATCO Panel Saws (Rpm: 2200) (Material capacity: 16 Gauge Mild Steel) (Blade capacity: 2-1/2") (Depth of cut: 5/8") (Add to cart: Add To Cart) (Rpm: 2200) (Material capacity: 16 Gauge Mild Steel) (Blade capacity: 3-3/8") (Depth of cut: 5/8") (Add to cart | 1 | |
| 70123 | USATCO Panel Saws (Rpm: 2200) (Material capacity: 16 Gauge Mild Steel) (Blade capacity: 2-1/2") (Depth of cut: 5/8") (Add to cart: Add To Cart) (Rpm: 2200) (Material capacity: 16 Gauge Mild Steel) (Blade capacity: 3-3/8") (Depth of cut: 5/8") (Add to cart | 1 | |
| 70250-13173-101 | TIRE,PNEUMATIC | 1 | |
| 70306-02115-101 | COUPLING，PNEUMATIC | 1 | |
| 704-2619-001 | CABO ADAPTADOR PMAT-2000 | 2 | |
| 7092 HOSE | Hose - Pneumatic | 1 | |
| 7092-100200 | RUBBER HOSE PNEUMATIC PRESS CALIBRT ACFT | 1 | |
| 7092-25200 | HOSE - PNEUMATIC, (1/4 INCH X 6 FEET, 1/4 INCH NPT MALE SWIVEL FITTING, 1/8 INCH NPT MALE FITTING) | 1 | |
| 7092HOSE | HOSE - PNEUMATIC | 1 | |
| 7094-010 | BEAD BREAKER,PNEUMATIC TIRE | 1 | |
| 71214-00039 | AVDEL PNEUMATIC GUN TOOL | 1 | |
| 716D578G1 | PNEUMATIC LOADER DRIVE | 1 | |
| 717RS1 | 717-200 REFERENCE STANDARD ISOLATOR LUG. FIG. 1.1 SHEET 1, PAGE 1. MATERIAL: 4340 NORMALIZED STEEL PER MIL-S-5000. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RS10-C | 717-200 REFERENCE STANDARD FOR THE LOWER CENTER WING SKIN PANELS AT STRINGER 16 &18. PAGES 1-11. MATERIAL: 2024-T3, 7075-T6 &7075-T7 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RS12 | 717-200 REFERENCE STANDARD...FIG. 1.16 SHEET 1-5, PAGES 1-5. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RS15 | 717-200 REFERENCE STANDARD...FIG. 1.4 SHEET 1-4, PAGES 1-4. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RS20 | 717-200 REFERENCE STANDARD...FIG. 1.21 SHEET 1-3, PAGES 1-3. MATERIAL: 2014-T6 and 7075-T7 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RS23 | 717-200 REFERENCE STANDARD...FIG. 1.8 SHEET 1-5, PAGES 1-5. MATERIAL: 2024-T3 and 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RS2A | 717-200 REFERENCE STANDARD...FIG. 1.12 SHEET 1-4, PAGES 1-4. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RS2B | 717-200 REFERENCE STANDARD...FIG. 1.13 SHEET 1-4, PAGES 1-4. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RS2C | 717-200 REFERENCE STANDARD...FIG. 1.14 SHEET 1-4, PAGES 1-4. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RS2D | 717-200 REFERENCE STANDARD...FIG. 1.15 SHEET 1-4, PAGES 1-4. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RS4 | 717-200 REFERENCE STANDARD FIGURE 1.17 SHEETS (1-4 ), PAGES 1-4. MATERIAL: 2024-T3 and 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RS7 | 717-200 REFERENCE STANDARD...FIG. 1.22 SHEET 1-7, PAGES 1-7. MATERIAL: 2024-T3 and 7075-T7 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RS8 | 717-200 REFERENCE STANDARD...FIG. 1.23 SHEET 1-6, PAGES 1-3. MATERIAL: 2024-T3 and 7075-T7 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RS9 | BOEING 717-200 REFERENCE STANDARD FIGURE 1.24. MATERIAL: 6AL-4V. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RST5 | 717-200 REFERENCE STANDARD...FIG. 1.18 SHEET 1-3, PAGES 1-3. MATERIAL: 2024-T3 and 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RST6 | 717-200 REFERENCE STANDARD...FIG. 1.19 SHEET 1-3, PAGES 1-3. MATERIAL: 2024-T3 and 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 72-5B | PNEUMATIC ADJUSTING BENCH | 1 | |
| 72-C04090 | USATCO PNEUMATIC GLUE INJECTION GUN | 2 | |
| 72-C27128 | GUN, PRC PNEUMATIC | 1 | |
| 72583 | PNEUMATIC CHISEL HEX. 28 X 150 X 350 MM NON SPARKING Cu-Be | 1 | |
| 72584 | PNEUMATIC CHISEL HEX. 28 X 150 X 350 MM NON SPARKING Al-Bron | 1 | |
| 72585 | POINT PNEUMATIC CHISEL 10 X 125 MM NON SPARKING Cu-Be | 1 | |
| 72586 | POINT PNEUMATIC CHISEL 10 X 125 MM NON SPARKING Al-Bron | 1 | |
| 72587 | POINT PNEUMATIC CHISEL 10 X 175 MM NON SPARKING Cu-Be | 1 | |
| 72588 | POINT PNEUMATIC CHISEL 10 X 175 MM NON SPARKING Al-Bron | 1 | |
| 72589 | FLAT PNEUMATIC CHISEL 10 X 125 MM NON SPARKING Cu-Be | 1 | |
| 72590 | PNEUMATIC CHISEL 10 X 125 MM NON SPARKING Al-Bron | 1 | |
| 72591 | PNEUMATIC CHISEL 10 X 175 MM NON SPARKING Cu-Be | 1 | |
| 72592 | PNEUMATIC CHISEL 10 X 175 MM NON SPARKING Al-Bron | 1 | |
| 72593 | PNEUMATIC CHISEL 10 X 125 MM NON SPARKING Cu-Be | 1 | |
| 72594 | PNEUMATIC CHISEL 10 X 125 MM NON SPARKING Al-Bron | 1 | |
| 72595 | PNEUMATIC CHISEL 10 X 175 MM NON SPARKING Cu-Be | 1 | |
| 72596 | PNEUMATIC CHISEL 10 X 175 MM NON SPARKING Al-Bron | 1 | |
| 72597 | FLAT PNEUMATIC CHISEL 10 X 125 MM WITH MIDDLE TIP NON SPARKING Cu-Be | 1 | |
| 72598 | FLAT PNEUMATIC CHISEL 10 X 125 MM WITH MIDDLE TIP NON SPARKING Al-Bron | 1 | |
| 72599 | FLAT PNEUMATIC CHISEL 10 X 175 MM WITH MIDDLE TIP NON SPARKING Cu-Be | 1 | |
| 72600 | FLAT PNEUMATIC CHISEL 10 X 175 MM WITH MIDDLE TIP NON SPARKING Al-Bron | 1 | |
| 72984 | PNEUMATIC VENTURI FAN Ø 100 MM - MasterEx 72984 - II 2G Ex IIB T6 | 1 | |
| 72985 | PNEUMATIC VENTURI FAN Ø 125 MM - MasterEx 72985 - II 2G Ex IIB T6 | 1 | |
| 72986 | PNEUMATIC VENTURI FAN Ø 150 MM - MasterEx 72986 - II 2G Ex IIB T6 | 1 | |
| 72987 | PNEUMATIC VENTURI FAN Ø 180 MM - MasterEx 72987 - II 2G Ex IIB T6 | 1 | |
| 72988 | PNEUMATIC VENTURI FAN Ø 200 MM - MasterEx 72988 - II 2G Ex IIB T6 | 1 | |
| 72989 | PNEUMATIC VENTURI FAN Ø 250 MM - MasterEx 72989 - II 2G Ex IIB T6 | 1 | |
| 72994 | PNEUMATIC VENTURI FAN Ø 101,6 MM INOX - MasterEX 72994 | 1 | |
| 72995 | PNEUMATIC VENTURI FAN Ø 129,0 MM INOX - MasterEX 72995 | 1 | |
| 72996 | PNEUMATIC VENTURI FAN Ø 154,0 MM INOX - MasterEX 72996 | 1 | |
| 72997 | PNEUMATIC VENTURI FAN Ø 168,3 MM INOX - MasterEX 72997 | 1 | |
| 72998 | PNEUMATIC VENTURI FAN Ø 204,0 MM INOX - MasterEX 72998 | 1 | |
| 72999 | PNEUMATIC VENTURI FAN Ø 219,1 MM INOX - MasterEX 72999 | 1 | |
| 76051 | PNEUMATIC CHISEL HEX. 19 X 270 X 330 MM NON SPARKING Cu-Be | 1 | |
| 76052 | PNEUMATIC CHISEL HEX. 19 X 270 X 330 MM NON SPARKING Al-Bron | 1 | |
| 76582 | COMBINATION PLIER 165 MM (6") TITACROM® BIMAT. 1000 V | 1 | |
| 76583 | COMBINATION PLIER 180 MM (7") TITACROM® BIMAT 1000 V | 1 | |
| 76584 | COMBINATION PLIER 200 MM (8") TITACROM® BIMAT 1000 V | 1 | |
| 76589 | FLAT NOSE PLIER 160 MM (6") TITACROM® BIMAT. 1000 V | 1 | |
| 76590 | ROUND NOSE PLIER 160 MM (6") TITACROM® BIMAT. 1000 V | 1 | |
| 76591 | LONG NOSE PLIER 160 MM (6") TITACROM® BIMAT. 1000 V | 1 | |
| 76592 | LONG NOSE PLIER 200 MM (8") TITACROM® BIMAT 1000 V | 1 | |
| 76593 | BENT NOSE PLIER 160 MM (6") TITACROM® BIMAT. 1000 V | 1 | |
| 76594 | BENT NOSE PLIER 200 MM (8") TITACROM® BIMAT. 1000 V | 1 | |
| 76595 | DIAGONAL CUTTING PLIER 160 MM (6") TITACROM® BIMAT. 1000 V | 1 | |
| 76596 | DIAGONAL CUTTING PLIER 190 MM (7") TITACROM® BIMAT 1000 V | 1 | |
| 76597 | H.D. CUTTING NIPPER PLIER 180 MM (7") TITACROM® BIMAT 1000 V | 1 | |
| 76598 | H.D. CUTTING NIPPER PLIER 200 MM (8") TITACROM® BIMAT 1000 V | 1 | |
| 76599 | END CUTTING NIPPER PLIER 160 MM (6") TITACROM® BIMAT. 1000 V | 1 | |
| 76600 | END CUTTING NIPPER PLIER ELEC. 160 MM (6") TITACROM® BIMAT. 1000 V | 1 | |
| 76602 | END CUTTING NIPPER PLIER ELECT. 200 MM (8") TITACROM® BIMAT. 1000 V | 1 | |
| 76603 | WIRESTRIPPER PLIER 160 MM (6") TITACROM® BIMAT. 1000 V | 1 | |
| 76605 | SET OF 3 PLIERS TITACROM® BIMAT 1000 V | 1 | |
| 76606 | COMBINATION PLIER MASTERCUT 165 MM (6") TITACROM® BIMAT. 1000 V | 1 | |
| 76607 | COMBINATION PLIER MASTERCUT 180 MM (7") TITACROM® BIMAT 1000 V | 1 | |
| 76609 | COMBINATION PLIER MASTERCUT 210 MM (8") TITACROM® BIMAT. 1000 V | 1 | |
| 76611 | COMBINATION PLIER MASTERCUT 235 MM (9") TITACROM® BIMAT 1000 V | 1 | |
| 76612 | LONG NOSE PLIER MASTERCUT 160 MM (6") TITACROM® BIMAT. 1000 V | 1 | |
| 76613 | LONG NOSE PLIER MASTERCUT 200 MM (8") TITACROM® BIMAT 1000 V | 1 | |
| 76614 | BENT NOSE PLIER MASTERCUT 160 MM (6") TITACROM® BIMAT. 1000 V | 1 | |
| 76616 | DIAGONAL CUTTING PLIER MASTERCUT 160 MM (6") TITACROM® BIMAT. 1000 V | 1 | |
| 76617 | DIAGONAL CUTTING PLIER MASTERCUT 190 MM (7") TITACROM® BIMAT 1000 V | 1 | |
| 76618 | H.D. CUTTING NIPPER PLIER MASTERCUT 180 MM (7") TITACROM® BIMAT 1000 V | 1 | |
| 76619 | H.D. CUTTING NIPPER PLIER MASTERCUT 200 MM (8") TITACROM® BIMAT 1000 V | 1 | |
| 76739 | MINING PNEUMATIC IMPACT WRENCH 3/4" - 1350 Nm - MasterEx 76739 - MINING I M2 Ex I T6 | 1 | |
| 76742 | MINING PNEUMATIC IMPACT WRENCH 1" - 1350 Nm MasterEx 76742 - MINING I M2 Ex I T6 | 1 | |
| 76747 | MINING PNEUMATIC IMPACT WRENCH 1.1/2" - 4400 Nm MasterEx 76747 - MINING I M2 Ex I T6 | 1 | |
| 79000 | PNEUMATIC AXIAL FAN Ø 400 MM - MasterEx 79000 - II 2G Ex IIB T6 | 1 | |
| 79199 | PNEUMATIC CIRCULAR SAW 230 MM MITRE CUTTING - MasterEX 79199 - II 2G Ex IIB T5 | 1 | |
| 79249 | PNEUMATIC ANGLE DRILL 23 MM - MasterEx 79249 - MINING I M2 Ex I T6 | 1 | |
| 79303 | PNEUMATIC CORE DRILL Ø 160 MM - MasterEX 79303 - II 2G Ex IIB T6 | 1 | |
| 79330 | PNEUMATIC CORE DRILL Ø 160 MM MINING - MasterEX 79330 - MINING I M2 Ex I T6 | 1 | |
| 79357 | PENEUMATIC CORE DRILL Ø 160 MM - AQUAMaster- MasterEX 79357 - II 2G Ex IIB T6 | 1 | |
| 79422 | PNEUMATIC CORE DRILL Ø 300 MM - MasterEX 79422 - II 2G Ex IIB T6 | 1 | |
| 79469 | PNEUMATIC BAND SAW 180 X 240 (7" X 9" ) MM - MasterEx 79469 - MINING I M2 Ex I T6 | 1 | |
| 79602 | PNEUMATIC DRILL 10 MM- MasterEx 79602 -MINING AND GAS I M2 Ex I / II 2G Ex IIB T6 | 1 | |
| 79603 | PNEUMATIC DRILL 13 MM- MasterEx 79603 - MINING AND GAS I M2 Ex I / II 2G Ex IIB T6 | 1 | |
| 79604 | PNEUMATIC HAMMER DRILL 13 MM -MasterEx 79604 - MINING AND GAS I M2 Ex I / II 2G Ex IIB T6 | 1 | |
| 79605 | PNEUMATIC D DRILL 13 MM - MasterEx 79605 - MINING I M2 Ex I T6 | 1 | |
| 79606 | PNEUMATIC ANGLE DRILL MasterEx 79606 - MINING I M2 Ex I T6 | 1 | |
| 79607 | PNEUMATIC TORQUE WRENCH 1" - 750 Nm MasterEx 79607 - MINING I M2 T6 | 1 | |
| 79608 | PNEUMATIC TORQUE WRENCH 1" - 1800 Nm MasterEx 79608 - MINING I M2 T6 | 1 | |
| 79609 | PNEUMATIC TORQUE WRENCH 1.1/2" - 3600 Nm MasterEx 79609 - MINING I M2 T6 | 1 | |
| 79610 | PNEUMATIC IMPACT WRENCH 1/2" - MasterEx 79610 - MINING I M2 Ex I T6 | 1 | |
| 79612 | PNEUMATIC IMPACT WRENCH 1" - MasterEx 79612 - II 2G Ex IIB T6 | 1 | |
| 79613 | PNEUMATIC IMPACT WRENCH 1" - 1800 Nm MasterEx 79613 - MINING I M2 Ex I T6 | 1 | |
| 79616 | PNEUMATIC BAND SAW - MasterEx 79616 - MINING I M2 Ex I T6 | 1 | |
| 79617 | PNEUMATIC RECIPROCATING SAW- MasterEx 79617 - II 2G Ex IIB T5 | 1 | |
| 79620 | PNEUMATIC AXIAL FAN Ø 300 MM - MasterEx 79620 - II 2G Ex IIB T6 | 1 | |
| 79621 | PNEUMATIC AXIAL FAN Ø 500 MM - MasterEx 79621 - II 2G Ex IIB T6 | 1 | |
| 79622 | PNEUMATIC AXIAL FAN Ø 600 MM - MasterEx 79622 - II 2G Ex IIB T6 | 1 | |
| 79625 | PNEUMATIC IMPACT WRENCH 1" MasterEx 79625 - II 2G Ex IIB T6 | 1 | |
| 79626 | PNEUMATIC IMPACT WRENCH 3/4"-1350Nm MasterEx 79626 - II 2G Ex h IIB T6 Gb | 1 | |
| 79631 | PNEUMATIC IMPACT SOCKET WRENCH 1.1/2" - 4400 Nm MasteEX 79631 - II 2G Ex IIB T6 | 1 | |
| 79632 | PNEUMATIC MAGNETIC CORE DRILL 125 MM MasteEX 79632 - II 2G Ex IIB T6 | 1 | |
| 79633 | PNEUMATIC MAGNETIC CORE DRILL 260 MM MasteEX 79633 - II 2G Ex IIB T6 | 1 | |
| 79658 | PNEUMATIC BAND SAW WITH CLAMP - MasterEX 79658 - II 2G Ex IIB T6 | 1 | |
| 79725 | PNEUMATIC IMPACT SOCKET WRENCH 1/2" - MasterEx 79725 - II 2G Ex IIB T6 | 1 | |
| 79728 | PERFOMANCE SET FOR PNEUMATIC SABRE SAWS COD. 79727 | 1 | |
| 79816 | MINING PNEUMATIC SABRE SAW - MasterEx 79816 - MINING I M2 Ex I T5 | 1 | |
| 79836 | PNEUMATIC CIRCULAR SAW 320 MM - MasterEX 79836 - II 3G Ex IIB T5 | 1 | |
| 79900 | PNEUMATIC ANGLE GRINDER- AQUAMaster | 1 | |
| 79901 | PNEUMATIC AXIAL DIE GRINDER - AQUAMaster | 1 | |
| 79902 | PNEUMATIC IMPACT WRENCH 3/4" -AQUAMaster - MasteEx 79902 - II 2G Ex IIB T6 | 1 | |
| 79903 | PNEUMATIC IMPACT WRENCH 1" -AQUAMaster MasterEx 79903 - II 2G Ex IIB T6 | 1 | |
| 79904 | PNEUMATIC DRILL 10 MM - AQUAMaster- MasterEx 79904 - II 2G Ex IIB T6 | 1 | |
| 79905 | PNEUMATIC DRILL 13 MM - AQUAMaster- MasterEx 79905 - II 2G Ex IIB T6 | 1 | |
| 79906 | PNEUMATIC IMPACT DRILL 13 MM- AQUAMaster - MasterEx 79906 - II 2G Ex IIB T6 | 1 | |
| 79907 | SDS PLUS PNEUMATIC IMPACT DRILL - AQUAMaster MasterEx 79907 - II 2G Ex IIB T6 | 1 | |
| 79908 | SDS-max PNEUMATIC IMPACT DRILL- AQUAMaster - MasterEx 79908 - II 2G Ex IIB T6 | 1 | |
| 79989 | PNEUMATIC CIRCULAR SAW 190 MM MITRE CUTTING - MasterEX 79989 - II 2G Ex IIB T5 | 1 | |
| 79996 | PNEUMATIC REVERSIBLE FEED SPINDLE DRILL 23 MM - MasterEX 79996 - II 2G Ex IIB T6 | 1 | |
| 79998 | PNEUMATIC REVERSIBLE FEED SPINDLE DRILL 32 MM - MasterEX 79998 - II 2G Ex IIB T6 | 1 | |
| 81603 | SWITCH FOOT FOR ROSCAMATIC 2-3-4-6" (REF. 60150 A 60193) Please consult serial no. | 1 | |
| 81820 | AUTOMATIC,PNEUMATIC GREASE | 1 | |
| 82112 | DATALOAD SOFTWARE - ARINC 615A, PMAT2000 (EFB) | 1 | |
| 85000 | BATTERY FOR PRESSMATIC PORTABLE CCA | 1 | |
| 85100 | SPRING HOLDER 8 MM Ø 4,5 MM FOR DRAINMATIC MAX 150 | 1 | |
| 440244 | CIRCUIT,PNEUMATIC ASSEMBLY | 1 | |
| 473036 | REPLACEMENT GAUGE TOOL NO. 473036 THIS PUMP CONTAINS A PNEUMATIC FOOT OPERATED HYDRAULIC PUMP, PRESSURE GAUGES, SUPPLY AIR OILER, PRESSURE REGULATOR AND HYDRAULIC HOSES. | 1 | |
| 476898 | Henkel 97042 LOCTITE 50 mL Dual Cartridge Pneumatic Applicator 11 and 21 Mix Ratios | 1 | |
| 491716 | COLLIMATOR,OPTICAL | 1 | |
| 500000 | PPG Semco 500000 Semmatic Series 2200 Control Unit | 1 | |
| 551671 | PROTECTIVE MAT | 1 | |
| 621157 | CRIMP TOOL,MFT,PNEUMATIC | 1 | |
| 621200 | CRIMP TOOL, HEX PNEUMATIC | 1 | |
| 621293 | CRIMP TOOL, HEX PNEUMATIC, SPECIAL | 1 | |
| 621500 | CRIMP TOOL, HEX PNEUMATIC | 1 | |
| 636163 | HOIST - FISHPOLE MIN 500 LB CAPACITY & 40 FT CABLE & LOAD LIMITER (MANUAL AND PNEUMATIC DRIVE) | 1 | |
| 701234 | MAT-PROTECTIVE T/R'S T1000 & GENX1B | 1 | |
| 734469 | MATRIZENPAAR | 1 | |
| 771170 | Battery Pack for TorqueMate200 & TorqueMate Plus (1x7Aa 8.4V) | 1 | |
| 827016 | PNEUMATIC INST TOOL | 1 | |
| 6897010 | AUTOMATIC WELDING LATHE HOLDS AND CONTROLS ROTATION OF COMPONENTS DURING WELDING PROCEDURES. | 1 | |
| 7821343 | TE CONNECTIVITY CERTI-CRIMP II HAND RATCHETING CRIMP TOOL FOR MULTIMATE TYPE III+ CONTACTS, 0.2 → 1. | 1 | |
| 7910112 | PNEUMATIC TEST SET | 1 | |
| 8070122 | PNEUMATIC GREASE GUN | 1 | |
| 8113903 | UNIT, NO. 1 ENGINE - PNEUMATIC START | 1 | |
| 70391267 | PNEUMATIC CAPACITY | 1 | |
| 82130001 | ST.97-SERVOMAT SOCKET DISPENSER | 1 | |
| 84132819 | TOOL:SPECIAL PURPOSE TYPE: TURBINE BORESCOPE POWER: BATTERY SIZE:NA MATL:NA GE TURBINE BORESCOPE TOOL MODEL XLVUD6120 PART NO 1850A4268 MANUFACTURER PART NUMBER(M) - 1850A4268; MANUFACTURER(MA) - GE - GENERAL ELECTRIC | 1 | |
| 416011580 | PNEUMATIC BOLT GUN | 1 | |
| 460006497 | HYDRAULIC PNEUMATIC PUMP SET | 2 | |
| 532500013 | CRIMPING DEVICE - BALL MATS | 1 | |
| 533610015 | UNIV PNUMATIC TEST SET 0-360PSI,0-145PSI | 1 | |
| 601866102 | MATKAP | 1 | |
| 6524000100 | LITEMATE PHOTOMETER PR-524 | 1 | |
| 6570010072 | PNEUMATIC ACTUATOR | 1 | |
| 7000121584 | 3M 021200-87978 Scotch-Weld EPX BlackGray 200 mL Pneumatic Sealant Applicator Gun | 1 | |
| 5120016469615 | PULLER, SEAL MATING, AXIS-G CARBON SEAL | 1 | |
| 5130002413483 | PNEUMATIC HAMMER | 1 | |
| 5130002949511 | PNEUMATIC BRACE | 1 | |
| 5130013353554 | HAMMER PNEUMATIC | 1 | |
| 6150015921369 | SIMPLEX MERLIN PORTABLE LB MERLIN 200 HAS TO BE THE MERLIN AND CANNOT BE REPLACED MATCHED WITH NSN ATTACHED. | 1 | |
| 734024-1 | ADAPTER(MICROMATCH) | 1 | |
| 739-8395 | DRILL,PNEUMATIC,PORTABLE;1800.0;203.0 MM;|AIR DRILL 10MM REVESIBLE;APT401R; | 1 | |
| 74 25Y1793 | MAT - PROTECTIVE | 1 | |
| 7440C-5 | PNEUMATIC CLOSE QUARTER 5/32" DIA. FLUSH | 1 | |
| 7440C-6 | PNEUMATIC CLOSE QUARTER 3/16" DIA. FLUSH | 1 | |
| 7440C-8 | PNEUMATIC CLOSE QUARTER 1/4" DIA. FLUSH | 1 | |
| 76002-00003 | PNEUMATIC POP RIVETERS | 1 | |
| 782-1343 | CERTI-CRIMP II HAND RATCHETING CRIMP TOOL FOR MULTIMATE TYPE III+ CONTACTS, 0.2 → 1.25MM² WIRE | 1 | |
| 79002147-1 | PNEUMATIC TOOL RIVET SET | 1 | |
| 790425A6 | STARTER PNEUMATIC | 1 | |
| 790425A8 | STARTER, PNEUMATIC | 1 | |
| 7LR | EC® Reversible Trim Shears (Approximate feed rate: 3.5 ft-min.) (Mild steel capacity: .080" Inconel) (Throat capacity: 2") (Type: Pistol Grip) (Add to cart: Contact us to order) (Approximate feed rate: 8 ft-min.) (Mild steel capacity: 14 Gauge) (Throat ca | 1 | |
| 7PR | EC® Reversible Trim Shears (Approximate feed rate: 3.5 ft-min.) (Mild steel capacity: .080" Inconel) (Throat capacity: 2") (Type: Pistol Grip) (Add to cart: Contact us to order) (Approximate feed rate: 8 ft-min.) (Mild steel capacity: 14 Gauge) (Throat ca | 1 | |
| 8000-004010-01 | AED PLUS, FULLY AUTOMATIC, AUTOMATED EXTERNAL DEFI | 1 | |
| 8000-04-01020301 | PMAT 2000 SPECIAL; LAPTOP | 1 | |
| 80000-03-01010203 | DATA LOADER - PORTABLE, ARINC 615/A WITH MASS STORAGE DEVICE. TOOL MODEL NAME IS "PMAT2000" | 1 | |
| 80000-03-02010301 | PMAT2000 TEST KIT | 1 | |
| 80000-04 | PMAT 2000 | 1 | |
| 80000-04-01020301 | PMAT 2000 - SPECIAL LAPTOP | 1 | |
| 80000-04-1020301 | PMAT 2000 - SPECIAL LAPTOP | 1 | |
| 80000-05 | PDL PMAT 2000 | 2 | |
| 80000-05-04050501 | PMAT 2000-SPECIAL LAP TOP | 1 | |
| 80000-05-08-09-08-01 | PMAT ASSEMBLY | 1 | |
| 80000-06 | DATA LOADER,PMAT2000 | 1 | |
| 80000-5 | PMAT 2000 DATA LOADER | 1 | |
| 8000CSA-12-1/2 | General Pneumatic Heavy Duty Stationary Riveter with 12-1/2" Reach | 2 | |
| 8000CSA-24 | General Pneumatic Heavy Duty Stationary Riveter with 24" Reach | 1 | |
| 8000CSA-9-1/2 | General Pneumatic Heavy Duty Stationary Riveter with 9-1/2" Reach | 1 | |
| 8000GSA | PNEUMATIC RIVET PRESS | 1 | |
| 80030-4 | CABLE EXTERNAL PMAT | 5 | |
| 80031-1 | CABLE, EXTERNAL, PMAT 2000 TO MCDP | 1 | |
| 80034-1 | PMAT EXTERNAL CABLE | 1 | |
| 80035-3 | PMAT 2000 Ethernet, USB and Power Breakout Cable | 1 | |
| 80041-04 | CABLE, EXTERNAL PMAT 2000 TO CF34 FADEC 25' LONG | 2 | |
| 80041-3 | CABLE - PMAT 2000 ANALYZER | 1 | |
| 80041-4 | Cable Cf34 To Pmat 2000 | 5 | |
| 800414-4 | CABLE CF34 TO PMAT 2000 | 1 | |
| 80042-1 | Rugged, Waterproof Shipping Case (Color-Orange) for PMAT 2000, with built in storage compartment for cables | 1 | |
| 80044-3 | PMAT 2000 External Power Supply Cable | 1 | |
| 80044-4 | PMAT 2000 EXTERNAL POWER SUPPLY CABLE | 1 | |
| 80045-3 | PMAT 2000 to PDL MSD with AC Adapter | 1 | |
| 80046-1 | PMAT 2000 to GE FADEC II and III Cable | 3 | |
| 80051-1 | PMAT 2000 to PMAT MSD load cable (777) | 1 | |
| 80061-4 | PMAT 2000 - CABLE 10 BASE-2 ADAPTAER | 1 | |
| 80061-5 | PMAT 2000 to PMAT NT with in-line AC Adapter | 1 | |
| 80062-1 | PMAT 2000 ARINC 429 Breakout Cable Air Supply Monitor | 1 | |
| 80062-2 | PMAT 2000 ARINC 429 Breakout Cable Air Supply Monitor | 1 | |
| 80062-3 | PMAT 2000 ARINC 429 Breakout Cable Air Supply Monitor | 2 | |
| 80067-3 | PMAT 2000 GE Breakout Cable | 4 | |
| 80069-1 | PMAT 2000 to Rockwell Collins HGS 4000 Guidance HUD | 2 | |
| 80072-4 | PMAT 2000 to Boeing EFB Loading Cable | 5 | |
| 8007848200 | MEASURER DEFORMAT. PALE | 1 | |
| 80079-1 | PMAT ETHERNET INTERFACE CABLE | 2 | |
| 8008-1 | PMAT CONTROL CABLE | 1 | |
| 80080-1 | PMAT 2000 RJ45 Adapter Kit | 7 | |
| 80081-1 | PMAT 2000 to 404/414 Bravo FADEC | 1 | |
| 80085-2 | PMAT 2000 (CAN bus, Ethernet bus and Serial port) Breakout cable | 1 | |
| 80086-2 | PMAT 2000 to ERJ APU adapter cable | 2 | |
| 80089-1 | PMAT 2000 to Boeing 777 AIMS II interface cable | 1 | |
| 80091-1 | PMAT 2000 to CAN loading cable | 1 | |
| 80093-1 | PMAT CABLE, CONFIG BOX | 2 | |
| 8024-2 BONDER | CONSOLE - HOT BONDER, REPAIR COMPOSITE STRUCTURES (AUTOMATIC OPERATION) | 1 | |
| 805.5201.10 | DIGIMATIC DEPTH GAGE | 1 | |
| 80719-3-UPG | PMAT CONFIG. SOFTWARE | 1 | |
| 80719-3-UPG-2 | PMAT KIT | 1 | |
| 80751-1 | DRIVE - EXTERNAL, CD-ROM (PMAT 2000 ONLY) | 1 | |
| 80800-1 | PMAT 2000 RJ4S ADAPTER KIT | 1 | |
| 80800-3 | PMAT 2000 USB CDROM/DVD Reader Kit | 3 | |
| 80803-1 | BATTERY - PMAT 2000 | 2 | |
| 80955-1 | MUX CABLE FOR PMAT | 5 | |
| 80RS14 | 717-200 REFERENCE STANDARD...FIG. 1.6 SHEET 1-4, PAGES 1-4. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| 80RS18 | 717-200 REFERENCE STANDARD...FIG. 1.5 SHEET 1-5, PAGES 1-5. MATERIAL: 7075-T6 CLAD ALUMINUM, 2014-T6 ALUMINUM. Includes Test Report and Certificate of Conformance.53.80.003 | 2 | |
| 80RS19 | 717-200 REFERENCE STANDARD...FIG. 1.2 SHEET 1-3, PAGES 1-3. MATERIAL: 2024-T3 or 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 80RS24 | BOEING REFERENCE STANDARD. MATERIALS: -3 DETAIL ALUMINUM SKIN 2024-T351, -5 DETAIL ALUMINUM STRINGER 2024-t351, -7 DETAIL ALUMINUM 7075-T6511, -9 DETAIL ALUMINUM 7075-T73 and -11 DETAIL ALUMINUM 7075-T73. Includes Test Report and Certificate of Conformanc | 1 | |
| 810-0057-101 | LMAT-2000 APPLICATION | 1 | |
| 812591300050 | 3/4X.035X10/14 MATRIX GP | 1 | |
| 812591308060 | 1X.035 10/14 8'6" MATRIX GP | 1 | |
| 8202A | TORQUE MULTIPLIER, PNEUMATIC | 2 | |
| 822-1631-003-004 | PC DATA LOADER (COLLINS PCD-3000) / PMAT2000 | 1 | |
| 833433-1 | Pneumatic Drive Rivet Set Fixture | 1 | |
| 833663-1 | CDU ACTUATOR PNEUMATIC CONTROL STAND | 1 | |
| 833820-1 | PNEUMATIC DRIVE ACTUATOR TEST STAND | 1 | |
| 833902-1 | TEST BENCH LOW FLOW PNEUMATIC | 1 | |
| 833902-2 | TEST BENCH LOW FLOW PNEUMATIC | 1 | |
| 833923-1 | PNEUMATIC DRIVE | 1 | |
| 834355-1 | PAKING INSTALER/MATERIAL | 1 | |
| 8421012301 | 8421 0110 02 PNOMATIK MATKAP P.90 | 1 | |
| 8421050006 | PNEUMATIC DRILL - LBB26 EPX-013 | 1 | |
| 8421050014 | PNEUMATIC DRILL - LBB26 EPX-060 | 1 | |
| 8500-0001 | PMAT # MAINT ACCESS TERMINAL, PORTABL | 1 | |
| 85000-001 | PMAT PORTABLE | 1 | |
| 856A1364G02 | PHOTO SET, IDENTIFICATION OF ENGINE MATERIALS ON MCD | 9 | |
| 856A1488P02 | Pneumatic Engine Turning Tool- 2 man operation | 8 | |
| 856A2002P03 | Pneumatic Turning Tool | 1 | |
| 856A2002P04 | Pneumatic Turning Tool | 8 | |
| 856A2683G01 | CHIP DETECTOR MATERI | 5 | |
| 856A5778G01 | TOOTH BEARING PNEUMAT | 1 | |
| 856A5919G01 | MATING FACES MILLING FIXTURE - FAN BLADES MID SPAN SHROUD | 1 | |
| 856A6801G01 | MILLING FIXTURE OF MID SPAN SHROUD MATING FACES | 1 | |
| 8600A | VALVE AUTOMATIC PRESSURE | 2 | |
| 86365 | SUPPORT FOR MASTERMATIC-2 PRO | 1 | |
| 86366 | ADAPTER COMPLETE -MASTERMATIC-2 PRO | 1 | |
| 86575 | CLAMP FOR PIPES WITH AUTOMATIC POWER FEED (CAP: 530 MM) | 1 | |
| 86AP-239 | Automatic Positioner Insert | 1 | |
| 87850 | DIE HEAD SET WITHOUT DIES FOR BSPT AND NPT THREAD FOR ROSCAMATIC 50-2 | 1 | |
| 87855 | PIPE CUTTER FOR ROSCAMATIC 50-2 | 1 | |
| 87858 | PIPE CUTTER FOR ROSCAMATIC 80-3 | 1 | |
| 87862 | DIE HEAD SET BSPP WITHOUT DIES FOR ROSCAMATIC 100 -4 | 1 | |
| 87867 | PIPE CUTTER ROSCAMATIC 100 -4 | 1 | |
| 87938 | 1/4" STAPLES BOX FOR PNEUMATIC STAPLER COD. 57085 | 1 | |
| 87939 | 5/8" STAPLES BOX FOR PNEUMATIC STAPLER COD. 57085 | 1 | |
| 87940 | DUST BAG FOR PNEUMATIC SANDE COD. 57074 | 1 | |
| 87941 | VELCRO PAD 6" - ORBIT Ø 5 MM -130 GR. FOR PNEUMATIC SANDER COD. 57074 | 1 | |
| 87943 | BELT SANDER 80 (10 X 330 MM) FOR PNEUMATIC BELT SANDER COD. 57076 | 1 | |
| 87944 | BELT SANDER 120 (10 X 330 MM) FOR PNEUMATIC BELT SANDER COD. 57076 | 1 | |
| 87945 | BELT SANDER (20 X 520 MM) FOR PNEUMATIC BELT SANDER COD. 57077 | 1 | |
| 87951 | BLADE 24 T FOR PNEUMATIC BODY SAW COD. 57083 | 1 | |
| 87952 | BLADE 32 T FOR PNEUMATIC BODY SAW COD. 57083 | 1 | |
| 87953 | BLADE FOR PNEUMATIC WINDSCREEN REMOVER COD 57084 | 1 | |
| 880009 | DISSIPATIVE DUAL LAYER RUBBER MAT | 1 | |
| 880011 | DISSIPATIVE DUAL LAYER RUBBER MAT | 1 | |
| 887-9897 | INNER TUBE, PNEUMATIC TIRE, VEHICULAR | 1 | |
| 8938K11 | MATERIAL E52100 PER 6 FEET | 1 | |
| 8C2584G01 | Guide,pin set,install-control altermator&vbv actr | 1 | |
| 8C3471 | PULLER - MECHANICAL - AGBX - RING MATING - HP1 - HP2 - FP | 1 | |
| 8C3472 | PULLER - MECHANICAL - AGBX - RING MATING - IDG | 1 | |
| 8C3473 | PULLER - MECHANICAL - AGBX - RING MATING - VSCF | 1 | |
| 8C3473G01 | Puller,mechanical-agbx ring mating vscf | 1 | |
| 8C3474G01 | gage instl agbx ring mating hp1 | 1 | |
| 8C3474G02 | gage instl agbx ring mating hp1 | 1 | |
| 8C3475G01 | gage instl agbx ring mating hp2 | 1 | |
| 8C3476G01 | gage instl agbx ring mating fp | 1 | |
| 8C3486 | PULLER - MECHANICAL - AGBX - RING MATING - HP2 - CRANK SIDE | 1 | |
| 8C3487G01 | gage instl agbx ring mating hp2 crank side | 1 | |
| 8C3487G02 | gage instl agbx ring mating hp2 crank side | 1 | |
| 8C3495G01 | Puller,mechanical-agbx,ring mating,vscf | 1 | |
| 8LR | EC® Reversible Trim Shears (Approximate feed rate: 3.5 ft-min.) (Mild steel capacity: .080" Inconel) (Throat capacity: 2") (Type: Pistol Grip) (Add to cart: Contact us to order) (Approximate feed rate: 8 ft-min.) (Mild steel capacity: 14 Gauge) (Throat ca | 1 | |
| 8PR | EC® Reversible Trim Shears (Approximate feed rate: 3.5 ft-min.) (Mild steel capacity: .080" Inconel) (Throat capacity: 2") (Type: Pistol Grip) (Add to cart: Contact us to order) (Approximate feed rate: 8 ft-min.) (Mild steel capacity: 14 Gauge) (Throat ca | 1 | |
| 8RSAPT-40BQ | Screwdriver-Pneumatic | 1 | |
| 8RSATP-30BQ | Screwdriver - Pistol Grip, Pneumatic Drive (Reversible) | 1 | |
| 90-006 | HIGH SPEED GUN (PNEUMATIC) | 2 | |
| 90-035 | PNEUMATIC DRILL MOTOR 900RPM SEALANT REMOVING | 1 | |
| 90683 | Intensifier − Pneumatic Pressure (Optional) | 1 | |
| 90739 | PNEUMATIC PRESSURE INTENSIFIER | 1 | |
| 94105 | USATCO Extreme Edge Plastic Scrapers (Uses: Angled tip for sharp edges & corners) (Add to cart: Add To Cart) (Uses: For narrow channels, slots & detail scraping.) (Add to cart: Add To Cart) (Uses: Great for removing hard surface coating material.) (Add to | 1 | |
| 94106 | USATCO Extreme Edge Plastic Scrapers (Uses: Angled tip for sharp edges & corners) (Add to cart: Add To Cart) (Uses: For narrow channels, slots & detail scraping.) (Add to cart: Add To Cart) (Uses: Great for removing hard surface coating material.) (Add to | 1 | |
| 94107 | USATCO Extreme Edge Plastic Scrapers (Uses: Angled tip for sharp edges & corners) (Add to cart: Add To Cart) (Uses: For narrow channels, slots & detail scraping.) (Add to cart: Add To Cart) (Uses: Great for removing hard surface coating material.) (Add to | 1 | |
| 94108 | USATCO Extreme Edge Plastic Scrapers (Uses: Angled tip for sharp edges & corners) (Add to cart: Add To Cart) (Uses: For narrow channels, slots & detail scraping.) (Add to cart: Add To Cart) (Uses: Great for removing hard surface coating material.) (Add to | 1 | |
| 94109 | USATCO Extreme Edge Plastic Scrapers (Uses: Angled tip for sharp edges & corners) (Add to cart: Add To Cart) (Uses: For narrow channels, slots & detail scraping.) (Add to cart: Add To Cart) (Uses: Great for removing hard surface coating material.) (Add to | 1 | |
| 94110 | USATCO Extreme Edge Plastic Scrapers (Uses: Angled tip for sharp edges & corners) (Add to cart: Add To Cart) (Uses: For narrow channels, slots & detail scraping.) (Add to cart: Add To Cart) (Uses: Great for removing hard surface coating material.) (Add to | 2 | |
| 94111 | USATCO Extreme Edge Plastic Scrapers (Uses: Angled tip for sharp edges & corners) (Add to cart: Add To Cart) (Uses: For narrow channels, slots & detail scraping.) (Add to cart: Add To Cart) (Uses: Great for removing hard surface coating material.) (Add to | 1 | |
| 900041 | PNEUMATIC CONTROL PANEL CONTROLLER | 1 | |
| 9004-4 | (MTO)-SPECIAL PRP TOOL-SUN AUTOMATION | 1 | |
| 904.21.02.104 | GUN,GREASE,PNEUMATIC | 1 | |
| 906-10246-1 | EXLRT AUTOMATED LOOP & JOINT TESTER KIT | 3 | |
| 906-10246-2 | EXLRT AUTOMATED LOOP & JOINT TESTER KIT | 2 | |
| 906-10246-3 | EXLRT AUTOMATED LOOP & JOINT TESTER KIT | 17 | |
| 9068074 | PROBE 8MM SIGMATEST 2.069 | 2 | |
| 9069275 | SIGMATEST 2.069 with 8mm Probe Kit | 1 | |
| 9069305 | SIGMATEST 2.069 with 14mm Probe Kit | 1 | |
| 9134735 | SIGMATEST WITH 14MM TITAN PROBE KIT | 1 | |
| 90432806 | Ribbed rubber mat TTS 95 PRO | 1 | |
| 860135940 | AUTOMATIC TEST EQUIPMENT | 1 | |
| 8816183000 | GENERATEUR PRESSION TANK, PRESSURE FEED, FINISHING-MATERIAL | 2 | |
| 8940158775 | Chicago Pneumatic® Reciprocating Saw (Description: 5-Pack Reciprocating Saw Blades - 18 Teeth Per Inc) (Add to cart: Add To Cart) | 1 | |
| 8940158776 | Chicago Pneumatic® Reciprocating Saw (Description: 5-Pack Reciprocating Saw Blades - 18 Teeth Per Inc) (Add to cart: Add To Cart) (Description: 5-Pack Reciprocating Saw Blades - 24 Teeth Per Inc) (Add to cart: Add To Cart) | 1 | |
| 8940158777 | Chicago Pneumatic® Reciprocating Saw (Description: 5-Pack Reciprocating Saw Blades - 18 Teeth Per Inc) (Add to cart: Add To Cart) (Description: 5-Pack Reciprocating Saw Blades - 24 Teeth Per Inc) (Add to cart: Add To Cart) (Description: 5-Pack Reciprocati | 1 | |
| 8992510211 | MIRKA ÇIFT HAVALI (PNÖMATIK) OPERATÖR KITI | 1 | |
| 8993000111 | MIRKA PNEUMATIC SANDER | 1 | |
| 90759-1 | CRIMPING TOOL MATE&LOCK CONNECTOR CONTACT | 4 | |
| 90970-1 | INTENSIFIER - PNEUMATIC PRESSURE | 1 | |
| 90970−1 | Intensifier − Pneumatic Pressure | 1 | |
| 90TD03838 | PNEUMATIC DUCT CAP SB TOOL | 1 | |
| 913-5019-440 | CAPACITOR (ESDS MATERIAL) | 4 | |
| 92700-10322-041 | MATERIAL: LANDING GEAR PIN EXTRACTOR | 1 | |
| 9315-010 | PNEUMATIC BAG, LIFTING | 1 | |
| 9471M34 | PMAT CABLE ASSEMBLY | 1 | |
| 9471M34G01 | PMAT CABLE ASSEMBLY | 1 | |
| 9471M34G02 | PMAT CABLE ASSRMBLY | 9 | |
| 9471M34P01 | PMAT CABLE ASSEMBLY | 1 | |
| 9486M87G02 | EXTRACTOR, MATING RING (PART OF 9C1928G02) | 1 | |
| 9486M88G02 | EXTRACTOR - MATING RING (9486M88G02, PART OF KIT 9C1929G02) | 1 | |
| 950-317 | Mitutoyo 950-317 - Digimatic Protractor Pro 360 | 11 | |
| 950-318 | Mitutoyo 950-318 - Digimatic Protractor Pro 3600 | 5 | |
| 950A4002350 | VERIN SVT 240-D40 POUR FOURCHE USIMAT SERMEES | 1 | |
| 951603 | MILLERMATIC 211 MIG WELDER, VERSATILE AND PORTABLE FOR A VARIETY OF WELDING TASKS. | 1 | |
| 952-0051-002 | AUTOMATED TEST/TRANSCRIPTION UNIT | 1 | |
| 954-2399REV | PRISMATIC COMPASS WITH TRIPOD (AIRCRAFT COMPASS) | 4 | |
| 9550753951 | PNEUMATIC FIRE DETECTOR | 1 | |
| 955A0000-102 | ROUE 4.00-4 AVEC JANTE ACIER POUR FOURCHE USIMAT | 1 | |
| 956A1607G01 | ADAPTER - VSV PNEUMATIC | 7 | |
| 956A1607G02 | ADAPTER - VSV PNEUMATIC | 4 | |
| 956A1634 | PMAT CABLE ASSEMBLY | 1 | |
| 956A1634G01 | PMAT CABLE ASSEMBLY | 1 | |
| 956A7616 | MAT - PROTECTION - INLET COWL | 1 | |
| 956A7616G01 | MAT, PROTECTION - INLET COWL | 1 | |
| 956A7616G02 | MAT, PROTECTION - INLET COWL | 4 | |
| 956A7616G03 | MAT, PROTECTION - INLET COWL | 1 | |
| 956A8086 | SET - PNEUMATIC CONNECTORS - HUB FAN FRAME | 1 | |
| 964-0434-041 | AUTOMATED TEST/TRANSCRIPTION UNIT (ATU) | 1 | |
| 983437 | LOCTITE PNEUMATIC DISPENSER KIT 200ML | 1 | |
| 983439 | LOCTITE PNEUMATIC DISPENSER KIT 400ML | 1 | |
| 9744738 | MINIMATE SCANNER (ROTATING BOLTHOLE SCANNER FOR OLYMPUS NORTEC 600D FLAW DETECTOR | 5 | |
| 9857180079-1 | PMAT ETHERNET INTERFACE CABLE | 1 | |
| 9857180955-1 | PMAT ARINC CABLE (RED) USUALLY PART OF THE PMAT BOX | 1 | |
| 98A35207599000 | FUNCTIONAL CHECK OF AUTOMATIC MASK RELEASE, DETAILED INSPECTION OF MASKS AND VISUAL CHECK OF CHEMICAL OXYGEN GENERATORS | 25 | |
| 98A53803019000 | AIRBUS REFERENCE STANDARD A300-600 Part 4 57-10-46 Page 404 Figure 403. Material:7050. Includes Test Report and Certificate of Conformance. | 3 | |
| 98A5380302000 | AIRBUS REFERENCE STANDARD A300-600 Part 4 57-10-46 Page 404 Figure 404. Material:7050. Includes Test Report and Certificate of Conformance. | 1 | |
| 98A54003002000 | Qutillage pose depose mats R/I frame engine | 5 | |
| 98A54003002001 | Qutillage pose depose mats R/I frame engine | 1 | |
| 98A54003002002 | Qutillage pose depose mats R/I frame engine | 1 | |
| 98A54003002003 | Qutillage pose depose mats R/I frame engine | 3 | |
| 98A54003002004 | Qutillage pose depose mats R/I frame engine | 2 | |
| 98A54003002005 | Qutillage pose depose mats R/I frame engine | 1 | |
| 98A54003019 | AIRBUS A300 REFERENCE STANDARD PART 4 54-40-00 PG. 13 FIGURE 8, SSI NO. 54-10-07. Material: 6AL-4v Titanium. Includes Test Report and Certificate of Conformance. | 1 | |
| 98A54003069 | AIRBUS A300 REFERENCE STANDARD PART 4 54-40-00 PG.41 FIGURE 29, SSI NO. 54-10-08. Material: 6AL-4v Titanium. Includes Test Report and Certificate of Conformance. | 1 | |
| 98A54003072 | AIRBUS A300 REFERENCE STANDARD PART 4 54-40-00 PG.25 FIGURE 16, SSI NO. 54-40-09. Material: 6AL-4v Titanium. Includes Test Report and Certificate of Conformance. | 1 | |
| 98A54003072000 | AIRBUS REFERENCE STANDARD A300-600 Part 4 54-50-23 Page 404 Figure 403. Material: 30NCD16 or Equivalent. Includes Test Report and Certificate of Conformance. | 2 | |
| 98A54003073 | IRBUS A300 REFERENCE STANDARD PART 4 54-40-00 PG.28 FIGURE 21, SSI NO. 54-40-09. Material: 6AL-4v Titanium. Includes Test Report and Certificate of Conformance. | 1 | |
| 98A54003073000 | AIRBUS REFERENCE STANDARD A300-600 Part 4 54-50-23 Page 404 Figure 403. Material: Titanium. Includes Test Report and Certificate of Conformance. | 3 | |
| 98A54003074 | AIRBUS A300 REFERENCE STANDARD PART 4 54-40-00 PG.19 FIGURE 12, SSI NO. 54-40-07. Material: 6AL-4v Titanium. Includes Test Report and Certificate of Conformance. | 1 | |
| 98A54003075 | AIRBUS A300 REFERENCE STANDARD PART 4 54-40-00 PG. 5 FIGURE 3, SSI NO. 54-10-03 Material: 6AL-4v Titanium. Includes Test Report and Certificate of Conformance. | 2 | |
| 98A54003077 | AIRBUS A300 REFERENCE STANDARD PART 4 54-40-00 PG. 5 FIGURE 3, SSI NO. 54-10-03. Material: 6AL-4v Titanium. Includes Test Report and Certificate of Conformance. | 2 | |
| 98A54503004000 | TOOL REBORING PYLON OUTIL REALESAGE MAT | 2 | |
| 98A54503004040 | TOOL REBORING PYLON OUTIL REALESAGE MAT | 1 | |
| 98A54503004042 | TOOL REBORING PYLON OUTIL REALESAGE MAT | 1 | |
| 98A54503004044 | TOOL REBORING PYLON OUTIL REALESAGE MAT | 1 | |
| 98D27804011000 | BAR-TURNING (NO PNEUMATIC METHOD OF EXTENSION) | 27 | |
| 98D34103003000 | ADAPTER, PITOT - PNEUMATIC CLEANER | 22 | |
| 98D38308234001 | ADAPTOR PITOT PNEUMATIC CLEANER | 13 | |
| 98D47209001120 | DFCV PNEUMATIC TEST PORT ADAPTER | 3 | |
| 98F54503001000 | Valise cles depose manille mat pylon R/I wrench strg | 12 | |
| 98G21003001000 | PNEUMATIC LEAK TEST | 1 | |
| 98L24203000000 | ACCES COEUR PRIMATRE HEART PRIMARY ACCES | 1 | |
| 98L24203000200 | ACCES COEUR PRIMATRE HEART PRIMARY ACCES | 1 | |
| 98L24203000204 | ACCES COEUR PRIMATRE HEART PRIMARY ACCES | 1 | |
| 98L24203000206 | ACCES COEUR PRIMATRE HEART PRIMARY ACCES | 1 | |
| 98L24203000208 | ACCES COEUR PRIMATRE HEART PRIMARY ACCES | 1 | |
| 98L24203000210 | ACCES COEUR PRIMATRE HEART PRIMARY ACCES | 1 | |
| 98L36103002000 | PNEUMATIC TEST KIT | 29 | |
| 98L36103002001 | TEST SET - PNEUMATIC SYSTEM ENGINE BLEED | 11 | |
| 98L57103002000 | AIRBUS A380-800 FIGURE 57-11-03-991-008-A PAGE 39. MATERIAL: 2024 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 98L57103024885 | PNEUMATIC FASTENING ANGLE HEAD | 1 | |
| 98N7810H001-000 | PMAT CABLE ASSEMBLY | 1 | |
| 98S21003000200 | ELECTROPNEUMATIC OUT FLOW VALVE | 10 | |
| 98S45105000000 | PMAT 2000 Adapter Cable | 2 | |
| 98S51005000-200 | ATR 72 TAP TEST TOOL FIGURE 1 ATR NTM 51-30-00 PAGE 304. MATERIAL: 7075-T6 ALUMINUM. | 4 | |
| 98S51605001-200 | ATR REFERENCE STANDARD ATR42-400/500 Part 6 51-60-00 Page 628 Figure 615. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 4 | |
| 98S51605001-202 | ATR REFERENCE STANDARD ATR42-400/500 Part 6 51-60-00 Page 628 Figure 615. Material: 15-5PH. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S51605001-204 | ATR REFERENCE STANDARD PT 6 51-60-00. MATERIAL: TITANIUM TA6V(6AL-4V). Includes Test Report and Certificate of Conformance. | 3 | |
| 98S51605001-230 | ATR REFERENCE STANDARD ATR72 Part 6 51-60-00 Page 630 Figure 616. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 4 | |
| 98S51605001-232 | ATR REFERENCE STANDARD ATR72 Part 6 51-60-00 Page 630 Figure 616. Material: 15-5PH. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S51605001-234 | ATR REFERENCE STANDARD ATR72 Part 6 51-60-00 Page 630 Figure 616. Material: Titanium. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S520305008-200 | ATR72 REFERENCE STANDARD PT 6 52-31-04 PAGE 603 FIGURE 601. Material: 2024-T62. Includes Test Report and Certificate of Conformance. | 1 | |
| 98S52305005-000 | ATR CALIBRATION STANDARD PT 4 53-31-04 PAGE 404 FIGURE 401. MATERIAL: 2024-T3, 15-5 CRES. Includes Test Report and Certificate of Conformance. | 4 | |
| 98S52305008-200 | ATR REFERENCE STANDARD ATR72 Part 6 52-31-04 Page 603 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005005-000 | ATR CALIBRATION STANDARD Part 6 53-31-01 Page 607 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53005006-000 | ATR CALIBRATION STANDARD Part 6 53-31-01 Page 606 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53005008-000 | ATR CALIBRATION STANDARD Part 6 53-31-21 Page 608 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53005009-000 | ATR CALIBRATION STANDARD Part 6 53-51-02 Page 606 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53005010-000 | ATR CALIBRATION STANDARD Part 6 53-51-03 Page 606 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53005012-000 | ATR CALIBRATION STANDARD Part 6 53-81-14 Page 606 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53005013-000 | ATR CALIBRATION STANDARD Part 6 53-81-14 Page 607 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53005015-000 | ATR CALIBRATION STANDARD Part 6 53-51-01 Page 608 Figure 601. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53005016-000 | ATR CALIBRATION STANDARD ATR42-400/500 Part 4 53-51-20 Page 407 Figure 402. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53005017-000 | ATR CALIBRATION STANDARD Part 6 53-81-16 Page 606 Figure 601. Material: 2024-T3, 7075-T6. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53005018-000 | ATR CALIBRATION STANDARD Part 6 53-81-16 Page 607 Figure 601. Material: 2024-T3, 7075-T6. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53005020-000/1 | ATR CALIBRATION STANDARD ATR72 Part 6 53-00-01 Page 608 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 98S53005020-000/2 | ATR CALIBRATION STANDARD ATR72 Part 6 53-00-01 Page 609 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 98S53005020-200 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-202 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-204 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-206 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-208 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53005020-210 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-212 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-214 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-216 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005021-000 | ATR72 CALIBRATION STANDARD 53-51-01 PART 6 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53005024-000 | ATR REFERENCE STANDARD Part 6 53-61-03 Page 606 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005025-000 | ATR REFERENCE STANDARD Part 6 53-61-02 Page 608 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005026-000 | ATR REFERENCE STANDARD Part 6 53-61-01 Page 606 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005028-000 | ATR REFERENCE STANDARD Part 6 53-31-04 Page 606 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53105000-200 | ATR72 CALIBRATION STANDARD PART 6 53-11-23 PAGE 612 FIGURE 603. MATERIAL: 15-5PH Steel. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53305004-000 | ATR REFERENCE STANDARD PT 5 53-51-01 Figure 501, Page 506 Does not include Stringer Hook. Material: 2024-T3 Aluminum. | 5 | |
| 98S53305006-000 | ATR NON-CONDUCTIVE PROBE GUIDE ATR42-400/500 Part 6 53-31-21 Page 622 Figure 607. Material: Delrin. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53305006-001 | ATR NON-CONDUCTIVE PROBE GUIDE ATR42-400/500 Part 6 53-31-21 Page 622 Figure 607. Material: Delrin. Includes Test Report and Certificate of Conformance. | 1 | |
| 98S53505003-200 | ATR CALIBRATION STANDARD ATR72 Part 4 53-56-01 Page 405 Figure 402. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 4 | |
| 98S53505006-000 | ATR REFERENCE STANDARD PT 4 53-51-23 FIG 403. Material: 7075-T7. Includes Test Report and Certificate of Conformance. | 4 | |
| 98S54305001-200 | ATR REFERENCE STANDARD Part 4 54-31-70 Page 403 Figure 401. Material: 15CDV6. Includes Test Report and Certificate of Conformance. | 4 | |
| 98S54305002-200 | ATR REFERENCE STANDARD ART72 Part 4 54-31-70 Page 403 Figure 401. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. | 5 | |
| 98S57105003-200 | ATR REFERENCE STANDARD Part 4 57-15-21 Page 403 Figure 401. Material: 35NCD16(4340). Includes Test Report and Certificate of Conformance. | 4 | |
| 98S57105004-200 | ATR CALIBRATION STANDARD ATR72 Part 4 57-15-21 Page 403 Figure 401. Material: 34NCD16(4340). Includes Test Report and Certificate of Conformance. | 4 | |
| 98S57105005-200 | ATR CALIBRATION STANDARD Part 4 57-12-11 Page 404 Figure 401. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 4 | |
| 98S57105006-200 | ATR CALIBRATION STANDARD ATR72 Part 4 57-12-11 Page 404 Figure 401. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S57105007-200 | ATR CALIBRATION STANDARD ATR72 Part 4 57-14-03 Page 403 Figure. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S57105011-200 | ATR CALIBRATION STANDARD Part 4 57-15-11 Page 403 Figure 401. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S57105015-200 | ATR REFERENCE STANDARD ATR72 Part 4 57-14-03 Page 403 Figure 401. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S57105016-200 | ATR CALIBRATION STANDARD Part 6 57-14-04 Page 603 Figure 601. Material: Plexiglass. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S57105019-200 | ATR CALIBRATION STANDARD Part 6 57-14-01 Page 603 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S57105030-200 | ATR CALIBRATION STANDARD Part 4 57-12-12 Page 404 Figure 401. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 4 | |
| 98S57105031-200 | ATR REFERENCE STANDARD ATR42-400/500 Part 4 57-12-12 Page 404 Figure 401. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S57105033-200 | ATR REFERENCE STANDARD ATR42-400/500 Part 4 57-12-11 Page 404 Figure 401. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 98S57105034-200 | ATR REFERENCE STANDARD ATR42-400/500 Part 4 57-14-03 Page 403 Figure 401. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 98S57205024-200 | ATR REFERENCE STANDARD PT 4 57-24-09 PAGE 403 FIGURE 401. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S57205025-200 | ATR REFERENCE STANDARD Part 4 57-24-10 Page 403 Figure 401. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S57205026-200 | ATR REFERENCE STANDARD Part 4 57-24-12 Page 403 Figure 401. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S57205027-200 | ATR REFERENCE STANDARD Part 4 57-24-13 Page 403 Figure 401. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S57205027-202 | ATR REFERENCE STANDARD Part 4 57-24-13 Page 404 Figure 402. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98V46203001000 | Pmat cable | 3 | |
| 98V46203002000 | CABLE WIRED GATELINK PMAT CABLE | 1 | |
| 99-1458 | HUCK PNEUMATIC RIVETER | 1 | |
| 99-2704 | RIVETER,BLIND,PNEUMATIC | 2 | |
| 9911-A1 | "LUBRICATION UNIT, MOBILE, PNEUMATIC POWERED | 1 | |
| 99127-071 | PNEUMATIC/ELECTRIC TEST SET KIT | 3 | |
| 99127B02 | TEST SET-PNEUMATIC ELECTRIC | 1 | |
| 99127B04 | BLEED TEST SET FOR PNEUMATIC SYSTEM | 1 | |
| 9914099-4 | EMERGENCY BRAKE PNEUMATIC BOTTLE | 1 | |
| 999515 | Pneumatic Motor Straight | 1 | |
| 999516 | PNEUMATIC MOTOR PISTOL 5KRPM – 0.4HP – 90PSI | 1 | |
| 9924097 | PLATE SCHEMATIC LINE | 1 | |
| 99A51107300000-7075 | AIRBUS REFERENCE STANDARD A330 Part 6 51-10-16 Page 615 Figure 610. Material: 7075. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53003001100 | AIRBUS MULTI HOLE REFERENCE STANDARD A-318- A321 51-63-04 PART 6 FIGURE 601, PAGE 601/602. MATERIAL: 6AL-4V TITANIUM. Includes Test Report an Certificate of Conformance. | 4 | |
| 99A53003001101 | AIRBUS MULTI HOLE REFERENCE STANDARD A-318- A321 51-63-04 PART 6 FIGURE 601, PAGE 601/602. MATERIAL: 2024-T3 ALUMINUM.. Includes Test Report an Certificate of Conformance. | 8 | |
| 99A53003001101/A1 | AIRBUS MULTI HOLE REFERENCE STANDARD A-318- A321 51-63-04 PART 6 FIGURE 601, PAGE 601/602. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. Note: Holes A1-A6 | 2 | |
| 99A53003001101/A13 | AIRBUS MULTI HOLE REFERENCE STANDARD A-318- A321 51-63-04 PART 6 FIGURE 601, PAGE 601/602. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. Note: Holes A13-A18 | 1 | |
| 99A53003001101/A7 | AIRBUS MULTI HOLE REFERENCE STANDARD A-318- A321 51-63-04 PART 6 FIGURE 601, PAGE 601/602. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. Note: Holes A7-A12 | 1 | |
| 99A53003001102 | AIRBUS MULTI HOLE REFERENCE STANDARD A-318- A321 51-63-04 PART 6 FIGURE 601, PAGE 601/602. MATERIAL: STEEL Includes Test Report an Certificate of Conformance. | 5 | |
| 99A53003001104 | AIRBUS REFERENCE STANDARD NTM A318/A319/A320/A321, A330, A340_500_600 51-63-05-991-001-A. MATERIAL: 6AL-4V (AMS4911)TITANIUM. Includes Test Report anc Certificate of Conformance... | 4 | |
| 99A53003001105 | AIRBUS REFERENCE STANDARD NTM A318/A319/A320/A321, A330, A340_500_600 51-63-05-991-001-A MATERIAL: AISI4130 STEEL. Includes Test Report and Certificate of Conformance... | 4 | |
| 99A53003001106 | AIRBUS REFERENCE STANDARD NTM A318/A319/A320/A321, A330, A340_500_600 51-63-05-991-001-A . MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 4 | |
| 99A53003001107 | AIRBUS REFERENCE STANDARD NTM A318/A319/A320/A321, A330, A340_500_600 51-63-05-991-001-A. MATERIAL: 6AL-4V(AMS4911) TITANIUM. Includes Test Report anc Certificate of Conformance. | 4 | |
| 99A53003001108 | AIRBUS REFERENCE STANDARD NTM A318/A319/A320/A321, A330, A340_500_600 51-63-05-991-001-A MATERIAL: AISI4130 STEEL. Includes Test Report and Certificate of Conformance... | 4 | |
| 99A53103002000 | AIRBUS REFERENCE STANDARD A300-600 Part 4 53-12-50 Page 407/408 Figure 403 Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53107282000 | AIRBUS REFERENCE STANDARD A300 Part 6 53-30-00 Page 6A/6B Figure 3A Material: 2024-T4 and 17-4PH Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53203005000 | AIRBUS REFERENCE STANDARD A300-600 Part 4 53-12-11 Page 407/408 Figure 403. Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53203007000 | AIRBUS REFERENCE STANDARD A300-600 Part 4 53-12-23 Paghe 404 Figure 403, Material: 2024 ro Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53307244000 | AIRBUS REFERENCE STANDARD PART 5 RESONANCE FREQUENCY A300 53-30-30 Page 9 Figure 3. Material: 2024-T3 Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53307267000 | AIRBUS A300-600 CALIBRATION BLOCK PART 4 53-30-52 PAGE 413 FIGURE 407. Material Aluminum 2024-T3 or T4. Includes Test Report and Certificate of Conformance. | 2 | |
| 99A53307267000 304 | AIRBUS A300-600 CALIBRATION BLOCK PART 4 53-30-52 PAGE 413 FIGURE 407. Material: 304 Stainless Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53307267000 7075T6 | AIRBUS A300-600 CALIBRATION BLOCK PART 4 53-30-52 PAGE 413 FIGURE 407. Material Aluminum 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53307274000 | AIRBUS A318/A319/A320/A321 REFERENCE STANDARD 51-10-16-991-005A, PAGE 10. MATERIAL: 2024-T351 ALUMINUM. Includes Test Report and Certificate of Conformance. | 5 | |
| 99A53307274000-7075 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 6 51-10-16 Page 7 Figure 51-10-16-991-005-A. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53403007000 | AIRBUS REFERENCE STANDARD A300-600 Part 6 53-15-78 Part 8 Page 604 Figure 603. Material: 2024-T3. Inlcudes Test Report and Certificate of Conformance. | 2 | |
| 99A53407285000 | AIRBUS REFERENCE STANDARD A318/319/320/321 Part 6 53-30-01 Pate 605 Figure 604, Material: 2024-T3 Includes Test Report and Certificate of Conformance. | 1 | |
| 99A55109003000 | AIRBUS REFERENCE STANDARD A300-600 Part 4 55-10-72 Page 407/408 Figure 403, Material: 7050-T7. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A55209001000 | Airbus Tap Test Tool A318-A321 PT 5 51-10-03 & A330 Figure 51-10-03-991-003-A. Material 2024 Aluminum. Includes Certificate of Conformance. | 15 | |
| 99A55407322000 | AIRBUS REFERENCE STANDARD A330 Part 9 - Visual 55-40-00 Page 906 Figure 904 Material: Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A57004001291 | AIRBUS REFERENCE STANDARD A300-600 Part 4 57-53-05 Page 405 Figure 403. Material: 2024-T351. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A57004001320 | AIRBUS REFERENCE STANDARD A300-600 Part 4 57-25-37 Page 404 Figure 403 Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| 99A57103001000 | AIRBUS A310 REFERENCE STANDARD 57-10-24 PART 4 FIGURE 403 PAGE 404. MATERIAL: 2024-T351 ALUMINUM...Includes Test Report and Certificate of Conformance. | 1 | |
| 99A57103003000 | AIRBUS A310 REFERENCE STANDARD 57-10-24 PART 4 FIGURE 404 PAGE 405. MATERIAL: 2024-T351 ALUMINUM...Includes Test Report and Certificate of Conformance. | 1 | |
| 99A57103005002 | AIRBUS REFERENCE STANDARD A310 PART 4 57-10-47 PAGE 406 FIGURE 403 Material: 2024-T351 ALUMINUM Includes Test Report and Certificate of Conformance. | 3 | |
| 99A57103009000 | AIRBUS REFERENCE STANDARD A300-600 Part 4 57-10-44 Page 405 Figure 403. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| 99A57103010000 | AIRBUS A300-600 REFERENCE STANDARD PART 4 57-10-41 FIGURE 403 PAGE 404. Material: 2024-T3 Includes Test Report and Certificate of Conformance. | 2 | |
| 99A57103011000 | AIRBUS A300-600 REFERENCE STANDARD PART 4, 57-10-41 FIGURE 404 PAGE 405 Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| 99A57103012000 | AIRBUS A300-6-- REFERENCE STANDARD PART 4, 57-10-41 FIGURE 405 PAGE 406 Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| 99A57103028000 | AIRBUS REFERENCE STANDARD A300-600, Part 4 57-10-22 Page 404 Figure 403, Material: 2024-T3 or Equivalent. Includes Test Report and Certificate of Conformance. | 3 | |
| 99A57103031000 | AIRBUS REFERENCE STANDARD A310 Part 4 53-15-42 Page 408 Figure 403 Material: 2024 or Equivalent Includes Test Report and Certificate of Conformance. | 2 | |
| 99A57103033000 | AIRBUS REFERENCE STANDARD A310 Part 4 57-10-26 Page 405 Figure 403 Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 2 | |
| 99A57103036000 | AIRBUS REFERENCE STANDARD A310 Part 4 57-10-67 Page 404 Figure 403 Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 2 | |
| 99A57103044000 | AIRBUS REFERENCE STANDARD A300-600 Part 4 57-10-53 Page 406 Figure 403 Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 2 | |
| 99A57103048000 | AIRBUS A300-600 REFERENCE STANDARD PART 4 57-10-36 PAGE 407/408 FIGURE 403. MATERIAL: 2024-T351 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A57103050000 | AIRBUS REFERENCE STANDARD A300-600 Part 4 57-10-64 Page 407/408 Figure 403 Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A57103051000 | AIRBUS REFERENCE STANDARD A300-600 Part 4 57-10-26 Page 411/412 Figure 403 Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A57103053000 | AIRBUS REFERENCE STANDARD A310 Part 4 57-10-07 Page 409/410 Figure 403 Material: 7175 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A57103054000 | AIRBUS REFERENCE STANDARD A300-600 Part 4 57-10-24 Page 411/412 Figure 403 Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A57103056000 | AIRBUS A300-600 REFERENCE STANDARD PART 4 57-10-50 PAGE 411 FIGURE 403. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance(COC) | 1 | |
| 99A57104329000 | AIRBUS REFERENCE STANDARD A300-600 Part 4 57-21-04 Page 405 Figure 403. Material: L97(2024-T3) and BAEM1102(7075-T6). Includes Test Report and Certificate of Conformance. | 1 | |
| 99A57104330000 | AIRBUS REFERENCE STANDARD A300-600 Part 4 57-21-04 Page 406 Figure 404. Material: L97(2024-T3) and BAEM1102(7075-T6). Includes Test Report and Certificate of Conformance. | 1 | |
| 99A57104331000 | AIRBUS CALIBRATION BLOCK A318/A319/A320/A321: PART 4 57-00-00-991-003-A SHEET 01, PAGE 10. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance(COC) | 1 | |
| 99A57104353000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-26-08 Page 409 Figure 404(Sheet 2) Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| 99A57104353001 | AIRBUS REFERENCE STANDARD A330 Part 4 57-26-08 Page 410 Figure 404 (Sheet 3) MATERIAL:2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 99A57104354000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-26-08 Page 406/407 Figure 403 (Sheet 2 and 3) Material: Delrin. lncludes Test Report and Certificate of Conformance. | 2 | |
| 99A57104355000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-26-08 Page 406/407 Figure 403 (Sheet 2 and 3) Material: Delrin. lncludes Test Report and Certificate of Conformance. | 3 | |
| 99A57204388000 | AIRBUS REFERENCE STANDARD A300-600 Part 6 57-21-58 Page 606 Figure 603. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A57204391001 | AIRBUS REFERENCE STANDARD A310 Part 6 57-25-26 Page 305 Figure 604. Material: 2024-T351. Includes Test Report and Certificate of Conformance. | 2 | |
| 99A57204394000 | AIRBUS REFERENCE STANDARD A310 Part 4 57-25-65 Page 406 Figure 404 Material: 2024-T351. Includes Test Report and Certificate of Conformance. | 4 | |
| 99A57204401000 | AIRBUS REFERENCE STANDARD A310 Part 4 57-25-49 Page 406 Figure 405 Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 3 | |
| 99A57204402000 | AIRBUS REFERENCE STANDARD A300 PT 4 57-23-07-991-003-A . MATERIAL 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| 99A57204403000 | AIRBUS REFERENCE STANDARD A300 PT 4 57-00-11 FIG.3 SHEET 1 PG.5-6, A310 PT 4 57-51-24. MATERIAL 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 3 | |
| 99A57204403001 | AIRBUS CALIBRATION BLOCK A300-600 PART 4 57-21-96 PAGE 404&405 and A318/A319/A320/A321: PART 4 57-20-64-991-006-A SHEET 1-2. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 5 | |
| 99A57204406000 | AIRBUS CALIBRATION STANDARD A300-600 Part 4 57-20-16 Page 405 Figure 403 Material: 2024-T351 or Equivalent. Includes Test Report and Certificate of Conformance. | 2 | |
| 99A57204408000 | AIRBUS CALIBRATION STANDARD A300-600 Part 4 57-20-16 Page 406 Figure 404 Material: 2024-T351 or Equivalent. Includes Test Report and Certificate of Conformance. | 2 | |
| 99A57204410000 | AIRBUS CALIBRATION STANDARD A310 Part 4 57-21-16 Page 408 Figure 404 Material: 2024-T351 or Equivalent. Includes Test Report and Certificate of Conformance. | 2 | |
| 99A57504294000 | AIRBUS A300-600 CALIBRATION STANDARD PT 6 57-52-05 PAGE 606 FIGURE 602 (SHEET 2). MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D51103001000 | AIRBUS REFERENCE STANDARD NTM A318/A319/A320/A321, FIGURE 51-10-04-991-014-A. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D51103004000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Page 9 Figure 51-10-04-270-803-A-01. Material: 7075-T7. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D51103016000 | AIRBUS REFERENCE STANDARD NTM A318/A319/A320/A321, FIGURE 51-10-31-991-004-A. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D51107295000 | AIRBUS REFERENCE STANDARD A318/319/320/321 Part 6 51-10-11 Page 605 Figure 604 Material 2024-T3. Includes Test Report and Certificate of Conformance. | 5 | |
| 99D51407291000 | AIRBUS CARBON STANDARD SET, ALL PR4 51-10-06:FIG402 PG404, FABRIC MATERIAL BMS 8-297 | 2 | |
| 99D51407291001 | Airbus Carbon Standard SET, ALL PT4 51-10-06:FIG402 PG404, Fabric Material R&D | 7 | |
| 99D51407291001-3 | Airbus Carbon Standard SET, ALL PT4 51-10-06:FIG402 PG404, Fabric Material #3 | 1 | |
| 99D52103001000 | AIRBUS REFERENCE STANDARD A318/319/320/321 Figure 52-13-04-991-003-A Material: 2024-T4. Includes Test Report and Certificate of Conformance. | 3 | |
| 99D53103000000 | AIRBUS REFERENCE STANDARD A318/319/320/321 Part 4 53-11-04 Page 404 Figure 404 Material: 2024. Includes Test Report and Certificate of Conformance. | 5 | |
| 99D53103001000 | AIRBUS REFERENCE STANDARD A318/319/320/321 Part 4 53-11-82 Page 404 Figure 403 Material: 7010-T7451. Oncludes Test Report and Certificate of Conformance. | 2 | |
| 99D53203000002 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 6 53-21-86 Page 604A/604B Figure 603 Material: 2024. Includes Test Report and Certificate of Conformance. | 5 | |
| 99D53203001000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 53-00-13-PB6 Page 6 Figure 53-00-13-991-003-A Sheet 1 Material 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D53207304000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 6 53-41-45 Page 607/608 Figure 604 Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 5 | |
| 99D53409001000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 6 53-41-37 Page 605 Figure 602 Material: 2024 and 7075, Fasteners: NAS1097D5-6. Includes Test Report and Certificate of Conformance... | 5 | |
| 99D54403001000 | AIRBUS REFERENCE STANDARD A318/319/320/321 Part 6 54-51-01 Page 606 Figure 604 Material 35NCD16. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D54403002000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 4 54-51-23 Page 407 Figure 406 Material TA6V. Includes Test Report and Certificate of Conformance. | 4 | |
| 99D54403003000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 4 54-51-23 Page 407 Figure 407 Material TA6V. Includes Test Report and Certificate of Conformance. | 4 | |
| 99D54403004000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 4 54-51-15 Page 405 Figure 404 Material 35NCD16. Includes Test Report and Certificate of Conformance. | 6 | |
| 99D54503004000 | AIRBUS CALIBRATION BLOCK A318/A319/A320/A321: PART 4 54-52-17-991-003-A SHEET 01, PAGE7. MATERIAL: 15-5PH STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D54503006000 | AIRBUS CALIBRATION BLOCK : PART 4 54-53-08-991-007-A SHEET 01. MATERIAL: 15-5PH STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D54503007000 | AIRBUS CALIBRATION BLOCK : PART 4 54-53-09-991-003-A SHEET 01. MATERIAL: 15-5PH STEEL. Includes Test Report and Certificate of Conformance. | 2 | |
| 99D55109001000 | Airbus Carbon Standard, ALL PT4 51-10-06:FIG402 PG404, Set of standards 1-4 & Tape Material | 7 | |
| 99D55109001000-3 | Airbus Carbon Standard, ALL PT4 51-10-06:FIG402 PG404, Tape Material #3 | 1 | |
| 99D55109001000/1MM | AIRBUS A318/A319/A320/A321 CARBON STANDARD PT 4 51-10-06 PAGE 7. MULTIDIRECTIONAL TAPE MATERIAL BLOCK NOMINAL THICKNESS (1mm). Includes Test Report and Certificate of Conformance. | 1 | |
| 99D57004000000 | Airbus Calibration Standard Block Set. A340-200/-300 51-63-03 Pg. 2-3, A300, A300-600, A310, A318/A319/A320/A321, A330, A340, A380 51-34-03, Figure 1 Sheett 1 Pg.1-2. Material: AMS-QQ-A-250 2024-T351 Aluminum. Includes Test Report and Certificate of C... | 4 | |
| 99D57004001001 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 51-63-03-PB1 Page 4 Figure 51-63-03-991-002-A Sheet 1 Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D57004001002 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 51-63-03-PB1 Page 5 Figure 51-63-03-991-002-A Sheet 1 Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D57103002001 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 57-11-85-PB4 Page 13 Figure 57-11-85-991-003-A Sheet 1 Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 5 | |
| 99D57103004000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 4 57-11-81 Page 406 Figure 403 Material: 7175T73. Includes Test Report and Certificate of Conformance. | 4 | |
| 99D57103005001 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 4 57-11-83 Page 405 Figure 403 Material: 7175T73. Includes Test Report and Certificate of Conformance. | 5 | |
| 99D57103007000 | AIRBUS REFERENCE STANDARD , A318/A319/A320/A321 Part 4 57-11-81 Page 417 Figure 408. Material: 7175T73. Includes Test Report and Certificate of Conformance. | 3 | |
| 99D57103008000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 4 57-11-82 Page 422 Figure 408 Material 7175T73. Includes Test Report and Certificate of Conformance. | 6 | |
| 99D57103009000 | AIRBUS REFERENCE STANDARD. MATERIAL: 7175-T7 ALUMINUM ANODIZED. PAINT WITH PRIMER | 4 | |
| 99D57103020000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 4 57-11-74 Page 405/406 Figure 403 Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 3 | |
| 99D57103021000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 4 57-11-47 Page 421 Figure 411 Material 7075-T7. Includes Test Report and Certificate of Conformance. | 5 | |
| 99D57103023000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 4 57-12-04-PB4 Page 47 Figure 57-12-04-991-013-A Sheet 1. Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D57103024000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 4 57-12-04-PB4 Page 11 Figure 57-12-04-991-003-A Sheet 1. Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D57103027000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 4 57-12-03-PB4 Page 73 Figure 57-12-03-991-015-A Sheet1 Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D57103028000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 4 57-12-03-PB4 Page 99 Figure 57-12-03-991-020-A Sheet 1 Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D57103033000 | AIRBUS A318/A319/A320/A321 REFERENCE STANDARD PART4 57-11-82-991-008-A PAGE 406 MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and certificate of Conformance. | 2 | |
| 99D57103036000 | AIRBUS A318/A319/A320/A321 REFERENCE STANDARD PART4 57-11-47-991-003-A . Material: 7075 Aluminum Includes Test Report and certificate of Conformance. | 2 | |
| 99D57204101000 | AIRBUS PROBE GUIDE A318/A319/A320/A321 Part 6 57-26-54 Page 605 Figure 603. Material: Delrin. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D57204105000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 4 57-26-54 Page 407/408 Figure 404. Material: 2024 and Delrin. Includes Test Report and Certificate of Conformance. | 5 | |
| 99D57204108000 | AIRBUS GUIDE BLOCK A318/A319/A320/A321 Part 4 57-20-10 Page 426 Figure 412. Material: Aluminum and Non Conductive Material. Includes Test Report and Certificate of Conformance. | 4 | |
| 99D57204116000 | AIRBUS SEARCH UNIT GUIDE BLOCK A318/A319/A320/A321 Part 4 57-26-54 Page 404/406 Figure 403. Material Delrin. Includes Test Report and Certificate of Conformance. | 3 | |
| 99D57204125000 | AIRBUS REFERENCE STANDARD A318/319/320/321 Part 4 57-29-04 PAGE 405 FIGURE 403. Material: 2014-T652. Includes Test Report and Certificate of Conformance. | 5 | |
| 99D57204164000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 4 57-29-07-PB4 Page 17 Figure 57-29-07-991-003-A Sheet 1. Material: 7150-T651 or Equivalent. Includes Test Report and Certificate of Conformance. | 4 | |
| 99D57204169000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 57-29-11-PB6 PG.9. MATERIAL: ABM3-1031(7150-T6 AL), ABM3-1029(7050-T7 AL). Includest Certification and COC. | 3 | |
| 99D57204169001 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 57-29-11-PB6 PG.9. MATERIAL: ABM3-1031(7150-T6 AL), ABM3-1029(7050-T7 AL). Includest Certification and COC. | 2 | |
| 99D57204170000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 57-29-11-PB6 PG.11. MATERIAL: ABM3-1031(7150-T6 AL), ABM3-1029(7050-T7 AL). Includest Certification and COC. | 3 | |
| 99D57204171000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 4 57-29-09-PB4 Page 12 Figure 57-29-09-991-003-A Sheet 1. Material: 2014-T652. Includes Test Report and Certificate of Conformance. | 2 | |
| 99D57204186000 | AIRBUS REFERENCE STANDARD Part 4 57-20-54 Figure 57-20-54-991-018-A. Material:2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| 99D57204193000 | AIRBUS CALIBRATION STANDARD, Material AL 7010/7050-T7651, EDM Notch 5mm (H) x 5mm (L) x 0.18mm (W) +/- 0.02mm, Paint all surfaces with primer (Material No. 16-006) . Includes Test Report and Certificate of Conformance. | 3 | |
| 99D57204196000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 57-29-11-PB6 PG.11. MATERIAL: ABM3-1031(7150-T6 AL), ABM3-1029(7050-T7 AL). Includes Test Report and Certificate of Conformance. | 2 | |
| 99D57204197000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 57-29-11-PB6 PG.11. MATERIAL: ABM3-1031(7150-T6 AL), ABM3-1029(7050-T7 AL). Includes Test Report and Certificate of Conformance. Note: Repair Plate = .236" | 2 | |
| 99D57294001000 | Airbus A318/A319/A320/A321 Calibration Block, Figure 57-29-08-991-023-A. Material: Cast Acrylic. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D57504100000 | AIRBUS REFERENCE STANDARD INBOARD LUG A318/A319/A320/A321 PART 4: 57-52-50 FIGURE 403 PAGE 404 Material: 2024-T351. Includes Test Report and Certificate of Conformance. | 2 | |
| 99D57504102000 | AIRBUS REFERENCE STANDARD OUTBOARD LUG A318/A319/A320/A321 PART 4: 57-52-50 FIGURE 403 PAGE 404 Material: 2024-T351. Includes Test Report and Certificate of Conformance. | 4 | |
| 99D57504103001 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 4 57-51-01 Page 405 Figure 403. Material 2024. Includes Test Report and Certificate of Conformance. | 3 | |
| 99F53103000000 | AIRBUS REFERENCE STANDARD A300 SERIES Part 6 53-12-25 Page 605/606 Figure 603 Material: 2024 or Equivalent. Annodize per(13-002) Primer(16-006) top coat(16-008) sealant(09-002) | 3 | |
| 99F53103003000 | AIRBUS REFERENCE STANDARD A330 Part 4 53-11-65-PB4 Page 9 Figure 53-11-65-991-00-A Sheet 1. Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53103004000 | AIRBUS REFERENCE STANDARD A330-200F PT 4 53-11-08-991-004-A PAGE 1. Material 2024 Aluminum. lncludes Test Report and Certificate of Conformance. | 2 | |
| 99F53103005000 | AIRBUS REFERENCE STANDARD A330-200F PT 4 53-11-09-991-003-A PAGE 1. Material 2024 Aluminum. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99F53103006000 | AIRBUS REFERENCE STANDARD A330-200F PT 4 53-11-48-991-004-A PAGE 1. Material 2024 Aluminum. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99F53103007000 | AIRBUS REFERENCE STANDARD A330, FIGURE 53-11-82-991-003-A MATERIAL: 2024. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99F53103009000 | AIRBUS REFERENCE STANDARD A330 PT 4 53-11-08-009-A. MATERIAL: 2024 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53103010000 | AIRBUS REFERENCE STANDARD A330 53-11-79-991-003-A PB4. MATERIAL: 2024-T3 ALUMINUM. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99F53107330000 | Airbus A318/A319/A320/A321 Conductivity Standard Block Set SB A320 57-1190 Figure 3. Material: 2024-T3 and 2024-T0 Aluminum. .047", 063" and .080" thickness in each Aluminum Temper Painted with Primer. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F53207310000 | AIRBUS REFERENCE STANDARD A330 Part 6 53-21-56-PB6 Page 12 Figure 53-21-56-991-004-A Sheet 1. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 4 | |
| 99F53207316000 | AIRBUS REFERNCE STANDARD A330 Part 6 53-21-36-PB6 Page 16 Figure 53-21-36-991-004-A Sheet 1. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53207317000 | AIRBUS REFERNCE STANDARD A330 Part 6 53-21-36-PB6 Page 18 Figure 53-21-36-991-005-A Sheet 1. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53207318000 | AIRBUS REFERNCE STANDARD A330 Part 6 53-21-36-PB6 Page 20 Figure 53-21-36-991-006-A Sheet 1. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303005000 | AIRBUS REFERENCE STANDARD A330 Part 6 53-31-09 Page 607/608 Figure 603. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F53303008000 | AIRBUS REFERENCE STANDARD A330 PT 4 53-31-07 FIGURE 403 PAGE 407/408, MATERIAL 7075 ALUMINUM. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99F53303008001 | AIRBUS REFERENCE STANDARD A330 Part 4 53-31-07 Figure 53-31-07-991-005-A Material: 7075 or Equivalent. lncludes Test Report and Certificate of Conformance. | 2 | |
| 99F53303009000 | AIRBUS REFERENCE STANDARD A330 Part 6 53-30-10-PB6 Page 12 Figure 53-30-10-991-004-A Sheet 1. Material: 2024-T3. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99F53303010000 | AIRBUS REFERENCE STANDARD A330 Part 4 53-31-14 Page 405 Figure 403. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F53303011000 | AIRBUS REFERENCE STANDARD A330 Part 4 53-31-56 Page 405 Figure 403. Material: 7175-T7351. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303012000 | AIRBUS REFERENCE STANDARD A330 Figure 53-31-61-991-010-A. Material: 7175-T7351. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F53303013000 | AIRBUS REFERENCE STANDARD A330 Part 4 53-31-61 Page 404 Figure 403. Material: 7475-T7351. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F53303017000 | AIRBUS REFERENCE STANDARD A330 Part 6 53-11-84-PB6 Page 7 Figure 53-11-84-991-003-A Sheet 1, Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 3 | |
| 99F53303018000 | AIRBUS REFERENCE STANDARD A330 Part 6 53-11-88 Page 607/608 Figure 604. Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 3 | |
| 99F53303019000 | AIRBUS REFERENCE STANDARD A330 Part 4 53-11-30 Page 404 Figure 403. Material: 7175-T7351. Includes Test Report and Certificate of Conformance. | 3 | |
| 99F53303020000 | AIRBUS REFERENCE STANDARD A330 Part 4 53-11-44 Page 404 Figure 403. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 99F53303021000 | AIRBUS REFERENCE STANDARD A330 Part 4 53-11-44 page 412 Figure 408. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 99F53303023000 | AIRBUS REFERENCE STANDARD A330 Part 6 53-30-16 Page 607/608 Figure 603. Material: 2024-T3 Bare and Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303026000 | AIRBUS REFERENCE STANDARD A330 Part 6 53-30-18-PB6 Page 10 Figure 53-30-18-991-003-A Sheet1. Material: 2024-T3 Bare and Clad. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99F53303027000 | AIRBUS REFERENCE STANDARD A330 Part 6 53-30-18-PB6 Page 11 Figure 53-30-18-991-004-A Sheet 1. Material: 2024-T3 Bare and Clad. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99F53303029000 | AIRBUS REFERENCE STANDARD A330 53-31-45-991-003-A, Material: 2024 or Equivalent, Fasteners: ASNA-2391-3 + ASNA-2025-3. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F53303030000 | AIRBUS REFERENCE STANDARD A330 Part 6 53-30-19 Page 605/606 Figure 603. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303085000 | AIRBUS REFERENCE STANDARD A330 Part 4 Figure 53-31-62-991-013-A. Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303086000 | AIRBUS REFERENCE STANDARD A330 Part 4 53-31-87-PB4 Page 14 Figure 53-31-87-991-004-A Sheet1. Material: 2024 or Equivalent. lncludes Test Report and Certificate of Conformance. | 5 | |
| 99F53303087000 | AIRBUS REFERENCE STANDARD A330 Part 4 53-31-87 Page 422 Figure 408, Material: 2024-T3. lncludes Test Report and Certificate of Conformance. | 4 | |
| 99F53303088000 | AIRBUS REFERENCE STANDARD A330 Part 4 53-31-11 PB4 Page 31 Figure 53-31-11-991-010-A Sheet 1, Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303091000 | AIRBUS REFERENCE STANDARD A330 Part 4 53-31-12-PB4 Page 10 Figure 53-31-12-991-015-B Sheet1, Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303092000 | AIRBUS REFERENCE STANDARD Figure 53-31-96-991-003-A. Material: 2024-R3 or Equivalent. Includes Test Report and Certificate of Conformance | 1 | |
| 99F53303094000 | AIRBUS REFERENCE STANDARD A330 Part 4 53-30-22-PB4 Page 10 Figure 53-30-22-991-003-A Sheet 1. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F53303096000 | AIRBUS REFERENCE STANDARD A330/A340-200/-300 53-30-29-PB4. MATERIAL: 2024-T351 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303097000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-11-70-PB4 Page 6 Figure 57-11-70-991-009-A Sheet 1. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F53303099000 | AIRBUS REFERENCE STANDARD A330 Part 4 53-30-42 Figure 53-30-42-991-003-A, Page 9, Material: 2024 or Equivalent. lncludes Test Report and Certificate of Conformance. | 3 | |
| 99F53303100000 | AIRBUS A330 REFERENCE BLOCK 53-30-51-991-003-A. MATERIAL: 7075 OR EQUIVQLENT ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303101000 | AIRBUS A330 REFERENCE BLOCK 53-30-52-991-003-A. MATERIAL: 7050 OR EQUIVALENT ALUMINUM. US INSPECTION OF MAIN LONGERON EXTENSION BETWEEN FR53.2 AND FR53.3. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F53303103000 | AIRBUS REFERENCE STANDARD A330 Part 4 53-31-89-PB4 Page 10 Figure 53-31-89-991-009-A Sheet 1. Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303104000 | AIRBUS REFERENCE STANDARD A330 Part 4 53-30-65 Figure 53-30-65-991-008-A. Material: 2024. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303113000 | AIRBUS REFERENCE STANDARD. MATERIAL: 2024-T3 ALUMINUM. 2 CORNER EDM SLOTS: 3mm x 3mm(.120" x .120") x 0.3mm(.012") Wide. Paint with primer. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303118000 | AIRBUS REFERENCE STANDARD A330-A340/200-300 Part 4 53-30-23 Page 407 Figure 403 Sheet 1. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F53303119000 | AIRBUS A330 REFERENCE STANDARD PART 4 53-30-70-991-008-A PAGE 7. MATERIAL: 7050 or EQUIVALENT. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303119001 | AIRBUS A330 REFERENCE STANDARD PART 4 53-30-70 PAGE 9. MATERIAL: 7050 or EQUIVALENT. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303120000 | AIRBUS A330-300/A340-200 CALIBRATION STANDARD 53-30-28 FIGURE 53-30-28-005-A. MATERIAL: 7075-T7351 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F53303125000 | ARIBUS REFERENCE STANDARD A330 Part 6 53-30-72 Figure 53-30-72-991-012-A. Material: 2024-T3 and 7075-T7. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F53303127000 | AIRBUS REFERENCE STANDARD Part 4 53-30-09 Figure 53-30-09-991-015-A. Material: 2024-T4. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53507256000 | AIRBUS REFERENCE STANDARD A330 Part 4 53-51-09-PB4 Page 12 Figure 53-51-09-991-004-A Sheet 1. Material: 7075-T7. lncludes Test Report and Certificate of Conformance. | 2 | |
| 99F54403000001 | AIRBUS REFERENCE STANDARD A330 Part 4 54-51-38 Page 404 Figure 403. Material: 40CDV12. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F54403001001 | AIRBUS REFERENCE STANDARD A330 Part 4 54-51-39 Page 404 Figure 403 Material: 40CDV12. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F54403002001 | AIRBUS REFERENCE STANDARD A330 Part 4 54-51-40 Page 405/406 Figure 403 Material: E-40CDV12. Includes Test Report and Certificate of Conformance. | 5 | |
| 99F54403002002 | AIRBUS REFERENCE STANDARD A330 54-51-40-991-008-A Page 15. Material 15-5PH. Includes Test Report and Certificate of Conformance. | 3 | |
| 99F54503000000 | Airbus Standard A340 54-51-04-991-011-A SHEET 01 Page 10 *NOT SURE OF THE EXACT MATERIAL* | 2 | |
| 99F54503011000 | AIRBUS REFERENCE STANDARD A330 54-51-40-PB4. MATERIAL 15-5PH STEEL. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F54503012000 | AIRBUS REFERENCE STANDARD A330 Part 6 54-51-04-PB6 Page 28 Figure 54-51-04-991-061-A Sheet 1. Material: 40CDV12. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F54503015000 | AIRBUS REFERENCE STANDARD A330 54-54-19-991-003-A. MATERIAL: TA6V TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57103010000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-11-52 Page 415 Figure 408. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F57103016001 | AIRBUS REFERENCE STANDARD A330 Part 4 57-11-46 Page 411/412 Figure 403. Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57103017000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-11-59 Page 404 Figure 403. Material: 2024. Includes Test Report and Certificate of Conformance. | 3 | |
| 99F57103018000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-11-45 Page 409/410 Figure 403. Material: 7175-T7. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F57103019000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-11-25 Page 404 Figure 403. Material: 2024 or equivalent. Includes Test Report and Certificate of Conformance. | 4 | |
| 99F57103029000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-11-57 Page 407/408 Figure 403. Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57103030000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-11-58 Page 407/408 Figure 403. Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57103032000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-11-22 Page7 Figure 57-11-22-991-003-A. Material: Aluminum Alloy. Includes Test Report and Certificate of Conformance. | 3 | |
| 99F57103040000 | AIRBUS REFERENCE STANDARD A340 part 4 57-18-12 Figure 57-18-12-991-003-A. Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57103041000 | AIRBUS REFERENCE STANDARD. MATERIAL: 2024-T3 ALUMINUM WITH PROTECTIVE FINISH 13-002 and PAINT PRIMER 16-006. Includes Test Report and Certificate of Conformance(COC) | 2 | |
| 99F57103042001 | AIRBUS REFERENCE STANDARD. MATERIAL: 2024-T3 ALUMINUM WITH PROTECTIVE FINISH 13-002 and PAINT PRIMER 16-006. APPLY TOP COAT 16-008. Includes Test Report and Certification of Conformance(COC) | 2 | |
| 99F57103051000 | AIRBUS REFERENCE STANDARD. MATERIAL: 2024-T3 ALUMINUM WITH PROTECTIVE FINISH 13-002 and PAINT PRIMER 16-006. APPLY TOP COAT 16-008 | 1 | |
| 99F57103057000 | AIRBUS REFERENCE STANDARD A330 PT 4 57-11-79-991-003-A. MATERIAL: 7075 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57103059000 | AIRBUS REFERENCE STANDARD 57-11-68-991-007-A. MATERIAL: 7175 or 7075 ALUMINUM WITH PROTECTIVE FINISH 13-002 and PAINT PRIMER 16-006. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57203000000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-20-84 Page 409 Figure 403. Material: 7175-T7. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57203002000 | AIRBUS REFERENCE STANDARD A330 PT 4 57-20-86-991-003-A. MATERIAL: 7075 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57204105000 | AIRBUS REFERENCE STANDARD Part 4 57-20-49 Figure 57-20-49-991-006-A. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 99F57204106000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-20-52 Page 424 Figure 413 Material: 2024. lncludes Test Report and Certificate of Conformance. | 4 | |
| 99F57204108000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-26-10-PB4 Page 12 Figure 57-26-10-991-003-A Sheet 1. Material: 2024-T351. Includes Test Report and Certificate of Conformance. | 3 | |
| 99F57204109001 | AIRBUS REFERENCE STANDARD A330 Part 4 57-26-10 Page 405 Figure 404. Material: 2024-T351. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F57204120000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-26-12 Page 404 Figure 403. Material: 2024-T351. Includes Test Report and Certificate of Conformance. | 4 | |
| 99F57204125000 | AIRBUS PROBE GUIDE A330 Part 6 57-26-08-PB6 Page 6 Figure 57-26-08-991-017-A Sheet 1. Material: Delrin. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F57204140000 | AIRBUS REFERENCE STANDARD A330 Part 6 57-20-02 Page 604 Figure 603. Material: 2024-T351. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F57204144000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-20-93 page 405 Figure 403. Material: 2024-T351. Includes Test Report and Certificate of Conformance. | 3 | |
| 99F57204172000 | Airbus A330-300} {A330-200}, 57-29-05 SPIGOT FITTING ATTCHMENT FLANGE AT HOLES 5 AND 11, LH/RH WINGS (2017-02-23 09:21:37) Mateial: 2024-T351. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F57204173000 | AIRBUS A330 REFERENCE STANDARD 57-20-46-270-801-A-01 PAGE 12. OUTER WING REAR SPAR UPPER & LOWER FLANGES BETWEEN RIB7 and RIB12 LH/RH. MATERIAL: 7010 ALUMINUM. Includes Test Report and Certificate of Conformance. | 3 | |
| 99F57500001000 | AIRBUS CALIBRATION STANDARD A340-200/-300, FIGURE 57-29-02-991-003-A. MATERIAL: 7050-T7651 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F57603001000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-61-16 page 404 Figure 403. Material: 7175-T7351. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57603002000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-61-06 Page 404 Figure 403. Material: Aluminum Alloy. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57603004000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-61-14-PB4 Page 6 Figure 57-61-14-991-003-A Sheet 1. Material: 2024. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F57603005000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-61-14-PB4 Page 17 Figure 57-61-14-991-008-A Sheet1. Material: 2024. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57603006000 | AIRBUS REFERENCE STANDARD A330-200F PT 4 57-61-21-991-003-A PAGE 1. Material 2024 Aluminum. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99L53103020000 | AIRBUS A380 REFERENCE STANDARD FIGURE 7 53-11-10-010-A PG. 25. Material: 7075-T751 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53103021000 | AIRBUS A380 REFERENCE STANDARD FIGURE 6 53-11-02-009-A PG. 17-18. Material: 7075-T7 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53113002000 | AIRBUS A380 REFERENCE STANDARD FIGURE 6 53-11-10-009-A PG. 24. Material: 2024-T351 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53303000000 | AIRBUS REFERENCE STANDARD A380 53-31-37-991-006-A. Material: 2024-T3 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53303022000 | AIRBUS A380-800 FIGURE 53-31-12-991-003-A PAGE 445. MATERIAL: 2024 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53303025000 | AIRBUS A380-800 53-31-04-010-A. MATERIAL: 2024 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53303027000 | AIRBUS REFERENCE STANDARD A380-800 53-31-37-991-013A. MATERIAL: 7475 OR EQUIVALENT 7050 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53303033000 | AIRBUS REFERENCE STANDARD A380-800 53-31-63-991-003-A. MATERIAL: 7175-T73 OR EQUIVALENT. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53303035000 | AIRBUS REFERENCE STANDARD A380 53-31-27-991-021-A PAGE 23. MATERIAL: 7175 OR 7075 ALUMINUM. Includes Certificate of Conformance. | 1 | |
| 99L53303036000 | AIRBUS A380-800 - Rev. num_ 75 - 01-Dec-2022 - Figure 53-31-80-991-003-A (SHEET 1) Material: 2024-T3 Aluminum. Includes Test Reports and Certificate of conformance. | 1 | |
| 99L53303037000 | AIRBUS REFERENCE STANDARD A380 53-31-27-991-020-A PAGE 22. MATERIAL: TEFLON. Includes Certificate of Conformance. | 1 | |
| 99L54503000000 | AIRBUS A380 REFERENCE STANDARD FIGURE:54-51-04-991-012-A. MATERIA L: 600/700 SERIES INCONEL. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L54503004000 | AIRBUS A380-800 54-51-05 SHEET 02 UPPER SPAR. MATERIAL: TA6V B(6AL-4V TITANIUM). Includes Test Report and Certificate of Conformance. | 1 | |
| 99L54503005000 | AIRBUS REFERENCE STANDARD A380-800 54-51-03-991-004-A. MATERIAL: TA6V B Includes Test Report and Certificate of Conformance. | 1 | |
| 99L54503006000 | AIRBUS REFERENCE STANDARD A380-800 54-52-02-991-022-A, MATERIAL:TA6VB Includes Test Report and Certificate of Conformance. | 1 | |
| 99L57103002000 | A380-800 REFERENCE STANDARD FIGURE:53-11-03-991-008-A. Material: 2024-T351 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L57203000000 | AIRBUS REFERENCE STANDARD A380 FIGURE 57-21-10-991-003-A. MATERIAL: 7175 OR EQUIVALENT. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L57203001000 | AIRBUS REFERENCE STANDARD A380 FIGURE 57-21-10-991-009-A. MATERIAL: 7175 OR EQUIVALENT. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L57204005000 | AIRBUS A300-600, A319,A320, A321, A330, A340, A380 REFERENCE STANDARD FIGURE:57-26-01-991-003-A. MATERIA L: 7010-T7651 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L57204067000 | AIRBUS SEARCH UNIT GUIDE A380-800 57-21-17-991-025-A. MATERIAL: DELRIN. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L57204068000 | AIRBUS CALIBRATION BLOCK A380-800 57-21-17-991-024-A. MATERIAL: 2024 HDT T351. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L57204069000 | AIRBUS SEARCH UNIT GUIDE A380-800 57-21-17-991-026-A. MATERIAL: DELRIN. Includes Test Report and Certificate of Conformance. | 1 | |
| 99N51109009000 | Airbus Calibration Block A318/A319/A320/A321 51-10-32 Figure 51-10-32-991-003-A Sheet 02 Page 11. Material: 2024-T351 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 99N51109010000 | Airbus Calibration Block A318/A319/A320/A321 51-10-32 Figure 51-10-32-991-003-A Sheet 02 Page 12. Material: 2024-T351 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 99T045-1 | Western Global Airlines LFEC Satcom Antenna Cutout Reference Standard, Appendix 1 (Sheet 1). Material: 2024-T3 Clad Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 99V52307336000 | AIRBUS REFERENCE STANDARD A380 52-31-01 FIGURE 5-52-31-01-005-A.MATERIAL: 2024-T351 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99V57103002000 | Airbus Calibration Block A350-A-571100-AFAPE3-04J2E-A-001-01 Sheet 01 Page 1-2. Material: Ti-6Al-4V ANNEALED PLATE. Includes Test Report and Certificate of Conformance. | 2 | |
| 99V57200003000 | AIRBUS CALIBRATION BLOCK A330 NTM 54-54-18. MATERIAL: TA6V BETA TITANIUM...INCLUDES TEST REPORT AND CERTIFICATE OF CONFROMANCE. | 3 | |
| 9C1277G01 | GUIDE PIN SET, FAN PROPULSOR MATING | 2 | |
| 9C1927G01 | EXTRACTOR - MATING RING (9486M86G01 PART OF 9C1927G01) | 1 | |
| 9C1928G01 | EXTRACTOR - MATING RING (9486M87G01 PART OF KIT 9C1928G01 OR 9C1928G02) | 1 | |
| 9C1928G02 | EXTRACTOR - MATING RING (9486M87G01 PART OF KIT 9C1928G019C1928G02) | 1 | |
| 9C1929G01 | EXTRACTOR - MATING RING (9486M88G01 PART OF KIT 9C1929G01) | 1 | |
| 9C1929G02 | Extractor - Mating Ring (9486M88G02, part of kit 9C1929G02) | 1 | |
| 9C6025P04-PPK | ENGINE SHIPPING STAND ( PNEUMATIC PUMP KIT ) | 1 | |
| 9C6032 | DOLLY - ENGINE -- PNEUMATIC TIRE | 1 | |
| 9C6032P02 | PNEUMATIC TIRE DOLLY FOR GE90 | 1 | |
| 9PR | EC® Reversible Trim Shears (Approximate feed rate: 3.5 ft-min.) (Mild steel capacity: .080" Inconel) (Throat capacity: 2") (Type: Pistol Grip) (Add to cart: Contact us to order) (Approximate feed rate: 8 ft-min.) (Mild steel capacity: 14 Gauge) (Throat ca | 1 | |
| 9RS1 | DC-9 REFERENCE STANDARD Page 1-4 Material:2024-T6 and 6AL-4V. Includes Test Report and Certificate of Conformance. | 1 | |
| 9RS11 | 717-200 REFERENCE STANDARD...FIG. 1.3 SHEET 1-3, PAGES 1-3. MATERIAL: 2024-T3 and 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| 9RS17 | MD-80 REFERENCE STANDARD 2-1 Figure 26. Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| 9RS5 | DC-9 REFERENCE STANDARD PAGES 17-20, SHEETS 1-4. MATERIAL: 2024-T3 CLAD ALUMINUM | 2 | |
| 9RST1 | 717-200 REFERENCE STANDARD...FIG. 1.11 SHEET 1-3, PAGES 1-3. MATERIAL: 2024-T3 and 2024-T6 ALUMINUM. Includes Test Report and Certificate of Conformance.FASTENER (MS20470AD8, NAS1478-6 + NAS1080-8) | 1 | |
| 9RST8 | 717-200 REFERENCE STANDARD FIGURE 1.10 SHEETS (1-6 ), PAGES 1-6. MATERIAL: 2024-T3 ALUMINUM and PHENOLIC(DMS1558). Includes Test Report and Certificate of Conformance. FASTENER (NAS1203 + NAS1252-10H + NAS679-A3, S432867-8 + NAS1080-8) | 1 | |
| A00458 | COMPOUND-SILICONE, COLD CURING SPECIFICATION OMAT 872 | 1 | |
| A1-300.04 - x2 (WINGS) - 120t A1-1200.01 - x1 (NOSE) - 30t | HYDRO tripod jack set wide body with control stand A300/A310 /A330/A340 with Automatic Safety Nut Lock Manufacturer: LFT Lukassen (now Hydro)- MFD:1990 | 1 | |
| A100K01BCD | BOMBA PNEUMÁTICA DE LUBRIFICAÇÃO | 1 | |
| A20002-47 | Scotchmate Loop | 1 | |
| A21-003 | BANCO PRUEBAS ITCAN NEUMÁTICAS ( KIT 302 ) | 1 | |
| A21010-203 | NRP, TEST SET, PNEUMATIC | 12 | |
| A22005-1 | BREAKOUT BOX - AUTOMATIC TEST STATION (ATS) LOADBOARD YAW DAMPER MONITOR RECEIVER, PRINTED CIRCUIT ASSEMBLY (PCA) | 1 | |
| A22005-9 | BREAKOUT BOX - AUTOMATIC TEST STATION (ATS) LOADBOARD YAW DAMPER MONITOR RECEIVER, PRINTED CIRCUIT ASSEMBLY (PCA) | 1 | |
| A26001-254 | Schematic Placard | 1 | |
| A26007-1 | PLUG EQUIPMENT - DISCHARGE NOZZLE, CARGO COMPT FIRE EXTINGUISHER SUPPLY SOURCE - PNEUMATIC WRENCH - TORQUE, 0 TO 500 IN-LBS (0 TO 56.49 N·M) | 7 | |
| A27017-41 | PNEUMATIC STSVTER | 12 | |
| A305 | BOEING REFERENCE STANDARD PART 6 57-30-03 pg. 3 Fig 1 & 57-10-18. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| A320 51-10-04 | Airbus A318/A319/A320/A321 51-10-04 Page 402 Figure 401, Measurement of Remaining Thickness in Large Blended Out Areas-Procedure A. Material: 6Al-4v Titanium. Steps: 0.5mm, 1mm, 2mm, 3mm, 4mm, 5mm +/-.05mm(.002"). Step Pad Size: 20mm(.787") x 20mm(.7... | 1 | |
| A34006-1 | TEST BOX - AUTOMATIC DIRECTION FINDER (ADF) CONTROL PANEL AND REAR MODULE | 1 | |
| A34006-21 | TEST BOX - AUTOMATIC DIRECTION FINDER (ADF) CONTROL PANEL AND REAR MODULE | 1 | |
| A35199 | PNEUMATIC PLIERS | 1 | |
| A35599 | PNEUMATIC PLIERS | 1 | |
| A36003-173 | PLUG SET-PNEUMATIC DUCTS HYDRO | 1 | |
| A36003-177 | PLUG SET - PNEUMATIC DUCTS HYDROSTATIC PRESSURE TEST | 1 | |
| A36003-178 | PLUG SET - PNEUMATIC DUCTS, HYDROSTATIC PRESSURE TEST | 1 | |
| A36003-179 | PLUG SET - PNEUMATIC DUCTS, HYDROSTATIC PRESSURE TEST | 1 | |
| A36004-15 | WRENCH PNEUMATIC DUCT | 6 | |
| A36006-1 | DUMMY CHECK VALVE - INTERMEDIATE PRESSURE (IP) PNEUMATIC SYSTEM, DISPATCH EQUIPMENT | 2 | |
| A38001-30 | Schematic Placard | 1 | |
| A40199 | PNEUMATIC PLIERS | 6 | |
| A49002-2 | HOIST - FISHPOLE MIN 500 LB CAPACITY & 40 FT CABLE & LOAD LIMITER (MANUAL AND PNEUMATIC DRIVE) | 16 | |
| A661910 | PREVENT THE DEFORMATION OF SEALS | 1 | |
| A667910 | PREVENT THE DEFORMATION OF SEALS | 1 | |
| A667911 | PREVENT THE DEFORMATION OF SEALS | 1 | |
| A668310 | PREVENT THE DEFORMATION OF THE SEAL | 1 | |
| A668662 | PREVENT THE DEFORMATION OF THE SEAL | 1 | |
| A671624 | PREVENT THE DEFORMATION OF THE SEAL | 1 | |
| A75099 | PNEUMATIC PLIERS | 1 | |
| AA5-510 | WHEELPANT COVERS (specify material type) (set of 3) | 1 | |
| AA500F-41 | 10M LENGHT APPROXIMATELY PRESSURE | 3 | |
| AA500F-6 | PNEUMATIC MANIFOLD | 3 | |
| AAENES060406 | SPARE BLADE FOR EXT THREADMATE | 1 | |
| AAERKTM20 | SPARE BLADE FOR INT THREADMATE | 1 | |
| AAERKTM21 | SPARE BLADE FOR INT THREADMATE | 1 | |
| AAR-MT-0231 | A321/320 ENG' INLET COWL PROTECTIVE MAT | 1 | |
| AATK-025 | PMAT 2000 RJ45 ADAPTER KIT BREAKOUT, CIS-MS/FSM BOOT-LOADER | 1 | |
| AB3000-30 | PNEUMATIC AIR START HOSE 30' - SPARE | 1 | |
| AB3000-60 | PNEUMATIC AIR START HOSE 60' - SPARE | 1 | |
| AC500 | AC500;MAP-Series FC/PC-FC/PC mating sleeve or replacement bulkhead | 1 | |
| AC501 | AC501;MAP-Series FC/PC-SC/PC mating sleeve or replacement bulkhead | 1 | |
| AC502 | AC502;MAP-Series FC/APC-FC/APC mating sleeve or replacement bulkhead | 1 | |
| AC503 | AC503;MAP-Series FC/APC-SC/APC mating sleeve or replacement bulkhead | 1 | |
| ACCUTAP | ACCUTAP AUTOMATED TAP TESTER | 1 | |
| ACE-500-1116 | PNEUMATIC UNIT,EN-GINE START | 3 | |
| ACE-500-1516 | PNEUMATIC UNIT,EN-GINE START | 2 | |
| ACE-500-1516 | PNEUMATIC UNIT,ENGINE START | 2 | |
| ACE500-1523 | UNIT PNEUMATIC START DIESEL | 1 | |
| ACER-500-1516 | UNIDADE DE PARTIDA PNEUMATICA | 1 | |
| ACL-125 | CUSTOM PROBE COLLAR, .125"Ø THRU HOLE, .500"Ø TIP OD, .750"Ø BODY OD. MATERIAL: BLACK DELRIN(ACETAL). 1823427 | 1 | |
| ACN16-M12 | 16 Pin Lemo to Microdot NPID-1024 cable with No balance coil. Used with N500 series and N600 series instruments with internal balance coils. Note*** Olympus web information for this product is incorrect. The Nortec 2000D and Nortec 2000D+ do not have i | 1 | |
| ACN16-MD15 | 16 Pin to Microdot NPID-1024 cable 15ft long with No balance coil. Used with N500 series and N600 series instruments with internal balance coils. Note*** Olympus web information for this product is incorrect. The Nortec 2000D and Nortec 2000D+ do not h | 1 | |
| ACN16-MD6 | 16 Pin to Microdot NPID-1024 cable with No balance coil. Used with N500 series and N600 series instruments with internal balance coils. Note*** Olympus web information for this product is incorrect. The Nortec 2000D and Nortec 2000D+ do not have int... | 1 | |
| ACP-001 | Automatic Center Punch | 1 | |
| ACS37AC00−12/12U | COUPLER, TINEL MATING | 1 | |
| ACS37AC00−17/09U | COUPLER, TINEL MATING | 1 | |
| ACS37AC00−17/12U | COUPLER, TINEL MATING | 1 | |
| ACS37AC00−17/17U | COUPLER, TINEL MATING | 1 | |
| ACT28B | PUMP, PNEUMATIC VACU | 1 | |
| ACTIVATOR 282 | THE ACTIVATOR 282 IS A DIRECT CONNECT, FULLY AUTOMATIC 2 AMP CHARGER CAPABLE OF CHARGING A 24 VOLT M | 3 | |
| AD30225-1 | PNEUMATIC COMPONENTS TEST STAND | 1 | |
| AD622417 | COMBINATION ELECTRONIC PLIER 125 MM (5")TITACROM® BIMAT. ANTIDROP ACO | 1 | |
| AD622437 | ROUND NOSE ELECTRONIC PLIER 125 MM (5") TITACROM® BIMAT. ANTIDROP ACO | 1 | |
| AD622477 | DIAGONAL CUTTING ELECTRONIC PLIER 115 MM (4") TITACROM® BIMAT. ANTIDROP ACO | 1 | |
| AD622977 | BOX JOINT PLIER 10" TITACROM® BIMAT ANTIDROP ACO | 1 | |
| AD622987 | BOX JOINT PLIER 12" TITACROM® BIMAT ANTIDROP ACO | 1 | |
| AD622997 | DIAGONAL CUTTING PLIER MASTERCUT 160 MM (6") TITACROM® BIMAT. ANTIDROP ACO | 1 | |
| AD623007 | H.D. CUTTING NIPPERS MASTERCUT 180 MM (7") TITACROM® BIMAT. ANTIDROP ACO | 1 | |
| AD623317 | COMBINATION PLIER 165 MM (6") TITACROM® BIMAT. ANTIDROP ACO | 1 | |
| AD623327 | COMBINATION PLIER 180 MM (7") TITACROM® BIMAT. ANTIDROP ACO | 1 | |
| AD623337 | COMBINATION PLIER 200 MM (8") TITACROM® BIMAT. ANTIDROP ACO | 1 | |
| AD623377 | FLAT NOSE PLIER 160 MM (6") TITACROM® BIMAT. ANTIDROP ACO | 1 | |
| AD623387 | ROUND NOSE PLIER 160 MM (6") TITACROM® BIMAT. ANTIDROP ACO | 1 | |
| AD623397 | LONG NOSE PLIER 160 MM (6") TITACROM® BIMAT. ANTIDROP ACO | 1 | |
| AD623407 | LONG NOSE PLIER 200 MM (8") TITACROM® BIMAT. ANTIDROP ACO | 1 | |
| AD623417 | BENT NOSE PLIER 160 MM (6") TITACROM® BIMAT. ANTIDROP ACO | 1 | |
| AD623427 | BENT NOSE PLIER 200 MM (8") TITACROM® BIMAT. ANTIDROP ACO | 1 | |
| AD623437 | DIAGONAL CUTTING PLIER 160 MM (6") TITACROM® BIMAT. ANTIDROP ACO | 1 | |
| AD623447 | H.D. CUTTING PLIER 180 MM (7.3/32") TITACROM® BIMAT. ANTIDROP ACO | 1 | |
| AD623457 | END CUTTER PLIER 160 MM (6") TITACROM® BIMAT.ANTIDROP ACO | 1 | |
| AD623467 | END CUTTING PLIER (ELECTRICIAN) 160 MM (6") TITACROM® BIMAT. ANTIDROP ACO | 1 | |
| AD623487 | END CUTTING PLIER (ELECTRICIAN) 200 MM (8") TITACROM® BIMAT. ANTIDROP ACO | 1 | |
| AD623497 | WIRESTRIPPER PLIER 160 MM (6") TITACROM® BIMAT. ANTIDROP ACO | 1 | |
| AD623507 | DIAGONAL CUTTING PLIER MASTERCUT 190 MM (7") TITACROM® BIMAT. ANTIDROP ACO | 1 | |
| AD623707 | H.D. DIAGONAL CUTTING PLIER 200 MM (8") TITACROM® BIMAT. ANTIDROP ACO | 1 | |
| AD624797 | COMBINATION PLIER MASTERCUT 210 MM (8") TITACROM® BIMAT. ANTIDROP ACO | 1 | |
| AD624807 | COMBINATION PLIER MASTERCUT 235 MM (9") TITACROM® BIMAT. ANTIDROP ACO | 1 | |
| AD624957 | COMBINATION PLIER MASTERCUT 165 MM (6") TITACROM® BIMAT. ANTIDROP ACO | 1 | |
| AD624967 | COMBINATION PLIER MASTERCUT 180 MM (7) TITACROM® BIMAT. ANTIDROP ACO | 1 | |
| AD624987 | LONG NOSE PLIER MASTERCUT 160 MM (6") TITACROM® BIMAT. ANTIDROP ACO | 1 | |
| AD624997 | LONG NOSE PLIER MASTERCUT 200 MM (8") TITACROM® BIMAT.ANTIDROP ACO | 1 | |
| AD625007 | BENT NOSE PLIER MASTERCUT 160 MM (6") TITACROM® BIMAT. ANTIDROP ACO | 1 | |
| AD625017 | BENT NOSE PLIER MASTERCUT 200 MM (8") TITACROM® BIMAT. ANTIDROP ACO | 1 | |
| AD625407 | DIAGONAL CUTTING PLIER 190 MM (7") TITACROM® BIMAT. ANTIDROP ACO | 1 | |
| AD625987 | H.D. CUTTING NIPPERS MASTERCUT 200 MM (8") TITACROM® BIMAT. ANTIDROP ACO | 1 | |
| AD651647 | MEASURING TAPE ROBUST BIMAT NYLON MATT 3 M X 19 MM ANTIDROP ACO | 1 | |
| AD651657 | MEASURING TAPE ROBUST BIMAT NYLON MATT 5 M X 25 MM ANTIDROP ACO | 1 | |
| AD653587 | MEASURING TAPE ROBUST BIMAT NYLON MATT 5 M/16' X 25 MM (mm/inch) ANTIDROP ACO | 1 | |
| AD668467 | ELECTRICIAN SCREWDRIVER 2 X 50 MM MICROTRONIC BIMAT ANTIDROP ACO | 1 | |
| AD668477 | ELECTRICIAN SCREWDRIVER 2 X 75 MM MICROTRONIC BIMAT. ANTIDROP ACO | 1 | |
| AD668487 | ELECTRICIAN SCREWDRIVER 3 X 75 MM MICROTRONIC BIMAT EGA ANTIDROP ACO | 1 | |
| AD668497 | ELECTRICIAN SCREWDRIVER 4 X 75 MM MICROTRONIC BIMAT. ANTIDROP ACO | 1 | |
| AD668507 | SCREWDRIVER PHILLIPS PH-00 MICROTRONIC BIMAT. EGA ANTIDROP ACO | 1 | |
| AD668517 | SCREWDRIVER PHILLIPS PH-0 MICROTRONIC BIMAT. ANTIDROP ACO | 1 | |
| AD668527 | SCREWDRIVER PHILLIPS PH-1 MICROTRONIC BIMAT. EGA ANTIDROP ACO | 1 | |
| AD765827 | COMBINATION PLIER 165 MM (6") TITACROM® BIMAT. 1000 V ANTIDROP ACO | 1 | |
| AD765837 | COMBINATION PLIER 180 MM (7") TITACROM® BIMAT 1000 V ANTIDROP ACO | 1 | |
| AD765847 | COMBINATION PLIER 200 MM (8") TITACROM® BIMAT 1000 V ANTIDROP ACO | 1 | |
| AD765897 | FLAT NOSE PLIER 160 MM (6") TITACROM® BIMAT. 1000 V ACO | 1 | |
| AD765907 | ROUND NOSE PLIER 160 MM (6") TITACROM® BIMAT. 1000 V ANTIDROP ACO | 1 | |
| AD765917 | LONG NOSE PLIER 160 MM (6") TITACROM® BIMAT. 1000 V ANTIDROP ACO | 1 | |
| AD765927 | LONG NOSE PLIER 200 MM (8") TITACROM® BIMAT 1000 V ANTIDROP ACO | 1 | |
| AD765937 | BENT NOSE PLIER 160 MM (6") TITACROM® BIMAT. 1000 V ANTIDROP ACO | 1 | |
| AD765947 | BENT NOSE PLIER 200 MM (8") TITACROM® BIMAT. 1000 V ANTIDROP ACO | 1 | |
| AD765957 | DIAGONAL CUTTING PLIER 160 MM (6") TITACROM® BIMAT. 1000 V ANTIDROP ACO | 1 | |
| AD765967 | DIAGONAL CUTTING PLIER 190 MM (7") TITACROM® BIMAT 1000 V ANTIDROP ACO | 1 | |
| AD765977 | H.D. CUTTING NIPPER PLIER 180 MM (7") TITACROM® BIMAT 1000 V ANTIDROP ACO | 1 | |
| AD765987 | H.D. CUTTING NIPPER PLIER 200 MM (8") TITACROM® BIMAT 1000 V ANTIDROP ACO | 1 | |
| AD765997 | END CUTTING NIPPER PLIER 160 MM (6") TITACROM® BIMAT. 1000 V ANTIDROP ACO | 1 | |
| AD766007 | END CUTTING NIPPER PLIER ELEC. 160 MM (6") TITACROM® BIMAT. 1000 V ANTIDROP ACO | 1 | |
| AD766027 | END CUTTING NIPPER PLIER ELECT. 200 MM (8") TITACROM® BIMAT. 1000 V ANTIDROP ACO | 1 | |
| AD766037 | WIRESTRIPPER PLIER 160 MM (6") TITACROM® BIMAT. 1000 V ANTIDROP ACO | 1 | |
| AD766067 | COMBINATION PLIER MASTERCUT 165 MM (6") TITACROM® BIMAT. 1000 V ANTIDROP ACO | 1 | |
| AD766077 | COMBINATION PLIER MASTERCUT 180 MM (7") TITACROM® BIMAT 1000 V ANTIDROP ACO | 1 | |
| AD766097 | COMBINATION PLIER MASTERCUT 210 MM (8") TITACROM® BIMAT. 1000 V ANTIDROP ACO | 1 | |
| AD766117 | COMBINATION PLIER MASTERCUT 235 MM (9") TITACROM® BIMAT 1000 V ANTIDROP ACO | 1 | |
| AD766127 | LONG NOSE PLIER MASTERCUT 160 MM (6") TITACROM® BIMAT. 1000 V ANTIDROP ACO | 1 | |
| AD766137 | LONG NOSE PLIER MASTERCUT 200 MM (8") TITACROM® BIMAT 1000 V ANTIDROP ACO | 1 | |
| AD766147 | BENT NOSE PLIER MASTERCUT 160 MM (6") TITACROM® BIMAT. 1000 V ANTIDROP ACO | 1 | |
| AD766167 | DIAGONAL CUTTING PLIER MASTERCUT 160 MM (6") TITACROM® BIMAT. 1000 V ANTIDROP ACO | 1 | |
| AD766177 | DIAGONAL CUTTING PLIER MASTERCUT 190 MM (7") TITACROM® BIMAT 1000 V ACO | 1 | |
| AD766187 | H.D. CUTTING NIPPER PLIER MASTERCUT 180 MM (7") TITACROM® BIMAT 1000 V ANTIDROP ACO | 1 | |
| AD766197 | H.D. CUTTING NIPPER PLIER MASTERCUT 200 MM (8") TITACROM® BIMAT 1000 V ANTIDROP ACO | 1 | |
| ADN14 | RIVNUT KIT DRILL ADAPTER BRAND: ASTRO PNEUMATIC | 1 | |
| ADSE-550 | PITOT STATIC TESTER PNEUMATIC | 2 | |
| ADSE-746 | ATEQ Omicron Air Data Test, 2xPs 2xPt, Automated, RVSM Digital | 3 | |
| ADSE743 | AIR DATA TEST SET, RVSM, DIGITAL, AUTOMATED PN: ADSE-743 | 3 | |
| ADT918-B2 | PUMP-PNEUMATIC PRESSURE TEST | 1 | |
| ADTS-505 | BARFIELD AUTOMATED DIGITAL PITOT STATIC TEST SET | 8 | |
| ADTS206 | AIR DATA PNEUMATIC TEST SET | 1 | |
| ADTS500 | AUTOMATED PITOT STATIC TESTER WITH 3 OUTPUTS WIFI | 3 | |
| ADTS505 | AIR DATA TEST SET C/W PNEUMATIC PUMP | 8 | |
| ADTS505ADTS | AIR DATA TEST SET C/W PNEUMATIC PUMP | 1 | |
| ADTS553F | AIR DATA PNEUMATIC TEST SET | 10 | |
| AED70US24 | POWER SUPPLY PMAT2000 | 2 | |
| AF-5036G1 | PROBE GUIDE Material: Delrin. Diameter 0.430 ±0.025 (10.92mm ±0.064). Used in Boeing procedure 57-53-03 Part 6. Includes Certificate of Conformance. | 1 | |
| AF-5036G2 | PROBE GUIDE Material: Delrin. Diameter 0.515 ±0.025 (13.08mm ±0.064). Used in Boeing procedure 57-53-03 Part 6. Includes Certificate of Conformance. | 1 | |
| AF-5089 | SUFACE PROBE SHIELDED, .075"Ø(1.9mm) TIP RIGHT ANGLE SHIELDED .118"(3mm) DROP, BENT 30° APPROXIMATELY 0.787"(20mm) AT HANDLE 5.0" LONG TRIAX FISCHER 50-500KHZ. Includes Test Report ancd Certificate of Conformance. | 1 | |
| AF-5234 | MANUAL HIGH FREQUENCY THREAD PROBE, 1-3MHz, 1/4-28UNF THREAD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR, MATERIAL INSPECTED 718 INCONEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5236 | MANUAL HIGH FREQUENCY THREAD PROBE, 1-3MHz, 1.25-12UNJF-3A THREAD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR, MATERIAL INSPECTED 718 INCONEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5254 | Custom Nortec / Pratt & Whittney Eddy Current Probe, 2MHz, Dual "D'" Coil, .2.50mm, 5.6 UH Matching Inductance, Spring Loaded Tip, Differential / Bridge, Match phase angle and frequency as close as possible. Supplied with a Triax Fischer connector. | 1 | |
| AF-5257G | PROBE GUIDE Material: Lucite. Diameter 1.50" ±0.02 . Used in Boeing procedure 55-10-27 Part 6. Includes Test Report and Certificate of Conformance | 1 | |
| AF-5331 | CUSTOM HIGH FREQUENCY THREAD PROBE, 1-3MHz, 1MM THREAD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR, MATERIAL INSPECTED 718 INCONEL. Includes Test Report and Certificate of Conformance | 1 | |
| AF-6004 | FIXED SLIDING PROBE, REFLECTION, 1KHz-100KHz, WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformation. | 1 | |
| AF-6004/2MD | FIXED SLIDING PROBE, REFLECTION, 1KHz-100KHz, SUPPLIED WITH 2 SINGLE MICRODOT CONNECTORS. CASE DIMENSIONS: 1.0" H x 1.5" L x .80" W Includes Test Report and Certificate of Conformation. | 1 | |
| AF-6004/4F | FIXED SLIDING PROBE, REFLECTION, 1KHz-100KHz, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. CASE DIMENSIONS: 1.0" H x 1.5" L x .80" W Includes Test Report and Certificate of Conformation. | 1 | |
| AF-6004/4L | FIXED SLIDING PROBE, REFLECTION, 1KHz-100KHz, SUPPLIED WITH A 4 PIN LEMO CONNECTOR. CASE DIMENSIONS: 1.0" H x 1.5" L x .80" W Includes Test Report and Certificate of Conformation. | 1 | |
| AF-6004/7L | FIXED SLIDING PROBE, REFLECTION, 1KHz-100KHz, SUPPLIED WITH A 7 PIN LEMO CONNECTOR. CASE DIMENSIONS: 1.5" H x 2.3" L x 1.2" W Includes Test Report and Certificate of Conformation. | 1 | |
| AF-6017 | SLIDING PROBE, REFLECTION, 100Hz-40KHz, WITH 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformation. | 1 | |
| AF-6021 | ABOSLUTE SLIDING PROBE WITH SEPARATE DRIVER/RECEIVER COILS, REFLECTION. ALUMINUM HOUSING. 200HZ-100KHz. 4-Pin FISCHER CONNECTOR. Includes Test Report and Certificate of Conformation. | 1 | |
| AF-6025-10&4 | SLIDING PROBE WITH 10:00 NOTCH TANGENT COIL ARRANGEMENT TO DETECT 45° TANGENTIAL CRACKS, REFLECTION, 1KHz-100KHz, WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformation. | 1 | |
| AF-6026-2&7 | SLIDING PROBE WITH 2:00 NOTCH TANGENT COIL ARRANGEMENT TO DETECT 45° TANGENTIAL CRACKS, REFLECTION, 1KHz-100KHz, WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformation. | 1 | |
| AF-6027-3&9 | SLIDING PROBE WITH 3:00 NOTCH TANGENT COIL ARRANGEMENT TO DETECT 45° TANGENTIAL CRACKS, REFLECTION, 1KHz-100KHz, WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformation. | 1 | |
| AF-NEC-6112-1/Ti | Custom multi-hole reference standard Material: 6AL-4v Titanium. Hole sizes: 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8",11/16" and 3/4". Countersink holes opposite side. Thru hole EDM notches in each hole .005" +/-.001". 3 Surface... | 1 | |
| AF5-2024-T3-.020-.100 | UT 5 STEP WEDGE .020", .040", .060", .080", .100. MATERIAL: 2024-T3 ALUMINUM | 1 | |
| AF5-7075-T6-.020-.100 | UT 5 STEP WEDGE .020", .040", .060", .080", .100. MATERIAL: 7075-T6 ALUMINUM | 1 | |
| AFC-K1SM | 1.0 MHz 1.0 inch diameter element straight beam compression transducer used for the inspection of composite materials. | 2 | |
| AFK-UTASW10-12 | ULTRASONIC ANGLE BEAM TRANSDUCER KIT. CONSISTS OF A QUANTITY OF 12 10 MHz TRANSDUCERS WITH MICRODOT CONNECTORS FOR INSPECTION OF ALUMINUM SURFACES. Includes Test Report and Certificate of Conformation. Custom fitted waterproof Kit Box Included. Kit Pa | 1 | |
| AFK-UTASW5-12 | ULTRASONIC ANGLE BEAM TRANSDUCER KIT. CONSISTS OF A QUANTITY OF 12 5 MHz TRANSDUCERS WITH MICRODOT CONNECTORS FOR INSPECTION OF ALUMINUM SURFACES. Includes Test Report and Certificate of Conformation. Custom fitted waterproof Kit Box Included. Kit Pa | 1 | |
| AFM-560AT | A 5 MHZ TRANSDUCER WITH A TOP MOUNTED CONNECTOR THAT PUTS A 60 DEGREE SHEAR WAVE INTO ALUMINUM. APPROXIMATE CASE DIMENSIONS: 0.750 INCH (19.05 MM) LON | 1 | |
| AFNDT-1002-1 | CUSTOM 3 HOLE STANDARD, MATERIAL: 7075-T6 ALUMINUM, .030x.030" CORNER EDM NOTCH IN EACH HOLE. HOLE SIZES 7/16"(.437"), .1/2"(.500"), 11/16"( .687") DIAMETERS. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1004CS | ARMY STRIKER THICKNESS BLOCK 3.0"L x 1.0"W x 7.31mm. THICK. MATERIAL: 4130 CARBON STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1012 | Bombardier / Challenger 300 Custom UT Thickness Reference Standard Figure 2 Part 1 Section 4 page 11. Material: 2024-T351 Clad. Standard machine milling, no Chemical mill. Step Tolerance: +/-.002". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1016-6S-TI | CUSTOM 6 HOLE REFERENCE STANDARD PER BOEING SPECIFICATION STANDARD 737, 747, 757, 767 PT 6 51-00-16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6, 51-00-02 PROCEDURE 1..... Hole Sizes: .188", .250", .313", .375" .438" .500". MATERIAL: 6AL-4V Titanium. Inc... | 1 | |
| AFNDT-1045 | 5 STEP ACRYLIC WEDGE. STEP SIZES: .250", .500",. 750", 1.00", 1.250" MATERIAL: CAST ACRYLIC. PAD SIZE: 1.0" x 1.0" TOLEREANCE = +/- .002". Includes Certification and Certificate of Conformance. | 1 | |
| AFNDT-1046 | STEP ACRYLIC WEDGE. STEP SIZES: 0.1", 0.3", 0.5", 0.7", 0.9", 1.1" MATERIAL: CAST ACRYLIC. PAD SIZE: 1.0" x 1.0" TOLEREANCE = +/- .002". Includes Certification and Certificate of Conformance. | 1 | |
| AFNDT-1062 | NON-PIPING CALIBRATION BLOCK FIGURE T-434.2.1 ASME SECTION V Article IV, 3" X 6 1/4" X 12". MATERIAL: 1018 CARBON STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1071/2024 | Custom Metric 6 Step Block. Step Thicknesses of 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm and 1.0mm. (Tolerance: +/- 0.02mm). Pad Size: 19mm X 19mm, (Tolerance: +/- 0.5mm) Material: 2024 Aluminum. Includes Certification Report for step thickness and Certific | 1 | |
| AFNDT-1071/304 | Custom Metric 6 Step Block. Step Thicknesses of 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm and 1.0mm. (Tolerance: +/- 0.02mm). Pad Size: 19mm X 19mm, (Tolerance: +/- 0.5mm) Material: 304 Stainless Steel. Includes Certification Report for step thickness and Ce | 1 | |
| AFNDT-1071/4340 | Custom Metric 6 Step Block. Step Thicknesses of 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm and 1.0mm. (Tolerance: +/- 0.02mm). Pad Size: 19mm X 19mm, (Tolerance: +/- 0.5mm) Material: 4340 CRES Steel. Includes Certification Report for step thickness and Certif | 1 | |
| AFNDT-1071/7075 | Custom Metric 6 Step Block. Step Thicknesses of 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm and 1.0mm. (Tolerance: +/- 0.02mm). Pad Size: 19mm X 19mm, (Tolerance: +/- 0.5mm) Material: 7075 Aluminum. Includes Certification Report for step thickness and Certific | 1 | |
| AFNDT-1071/INC | Custom Metric 6 Step Block. Step Thicknesses of 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm and 1.0mm. (Tolerance: +/- 0.02mm). Pad Size: 19mm X 19mm, (Tolerance: +/- 0.5mm) Material: 718 Inconel. Includes Certification Report for step thickness and Certificat | 1 | |
| AFNDT-1071/TI | Custom Metric 6 Step Block. Step Thicknesses of 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm and 1.0mm. (Tolerance: +/- 0.02mm). Pad Size: 19mm X 19mm, (Tolerance: +/- 0.5mm) Material: 6AL-4V Titanium. Includes Certification Report for step thickness and Certif | 1 | |
| AFNDT-1074/713 | Custom Metric 6 Step Block. Step Thicknesses of 0.5mm, 1mm, 3mm, 5mm, 7mm, 9mm. (Tolerance: +/- 0.02mm). Pad Size: 15mm X 15mm, (Tolerance: +/- 0.5mm) Material: 713 Inconel. Includes Certification Report for step thickness and COC of material used... | 1 | |
| AFNDT-1074/718 | Custom Metric 6 Step Block. Step Thicknesses of 0.5mm, 1mm, 3mm, 5mm, 7mm, 9mm. (Tolerance: +/- 0.02mm). Pad Size: 15mm X 15mm, (Tolerance: +/- 0.5mm) Material: 718 Inconel. Includes Certification Report for step thickness and COC of material used... | 1 | |
| AFNDT-1074/TI | Custom Metric 6 Step Block. Step Thicknesses of 0.5mm, 1mm, 3mm, 5mm, 7mm, 9mm. (Tolerance: +/- 0.02mm). Pad Size: 15mm X 15mm, (Tolerance: +/- 0.5mm) Material: 6AL-4V Titanium. Includes Certification Report for step thickness and COC of material ... | 1 | |
| AFNDT-1074AL | Custom Metric 6 Step Block. Step Thicknesses of 0.5mm, 1mm, 3mm, 5mm, 7mm, 9mm. (Tolerance: +/- 0.02mm). Pad Size: 15mm X 15mm, (Tolerance: +/- 0.5mm) Material: 7075-T6 Aluminum. Includes Certification Report for step thickness and COC of material... | 1 | |
| AFNDT-1090AL | 5 STEP WEDGE .050", .100", .150", .200", .250". TOLERANCE +/-.001". MATERIAL: 2024-T3 ALUMINUM. PAD SIZE: 750" x .750" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-1090SS | 5 STEP WEDGE .050", .100", .150", .200", .250". TOLERANCE +/-.001". MATERIAL: 304 STAINLESS STEEL .PAD SIZE: 750" x .750" . Includes Test Report traceable to NIST and Certificate of Conformance. .. | 1 | |
| AFNDT-1090TI | 5 STEP WEDGE .050", .100", .150", .200", .250". TOLERANCE +/-.001". MATERIAL: 6AL-4V TITANIUM .PAD SIZE: 750" x .750" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-1095 | 8 STEP THIN WEDGE, STEP SIZES OF .030", 0.040",.050", .060", .070", .080", .090", and .100" +/- .001". PAD SIZE: .75"x.75", MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1095AL | 8 STEP THIN WEDGE, STEP SIZES OF .030", 0.040",.050", .060", .070", .080", .090", AND .100" +/- .001". PAD SIZE: .75"X.75", MATERIAL: 7075-T6 ALUMINUM. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| AFNDT-1096/304SS | 9 STEP REFERENCE BLOCK WITH ACETAL(DELRIN) HOLDING BLOCK. MATERIAL: 304 STAINLESS STEEL. STEP SIZES: .020",.050",.080", .120", .160" , .200", .300", .500", .750" +/-.010". PAD SIZE = 1.0" x 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1096/6061AL | 9 STEP REFERENCE BLOCK WITH HOLDER. MATERIAL: 6061 ALUMINUM. STEP SIZES: .020",.050",.080", .120", .160" , .200", .300", .500", .750" +/-.010". PAD SIZE = 1.0" x 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1096/625 | 9 STEP REFERENCE BLOCK WITH ACETAL(DELRIN) HOLDING BLOCK. MATERIAL: 625 INCONEL. STEP SIZES: .020",.050",.080", .120", .160" , .200", .300", .500", .750" +/-.010". PAD SIZE = 1.0" x 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1096/718 | 9 STEP REFERENCE BLOCK WITH ACETAL(DELRIN) HOLDING BLOCK. MATERIAL: 625 INCONEL. STEP SIZES: .020",.050",.080", .120", .160" , .200", .300", .500", .750" +/-.010". PAD SIZE = 1.0" x 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2004 | EDDY CURRENT SURFACE STANDARD WITH 3 EDM NOTCHES: ( .005", .010", .020" Deep x .004"Wide +/- .002 ), MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2007AL | CUSTOM 4 STEP WEDGE. MATERIAL: 7075-T6 ALUMINUM. STEP SIZES: .020",.040",.060",.090" +/-.001. PAD SIZE: .75" x .75". Includes Test Report Traceable to NIST. | 1 | |
| AFNDT-2007AL-1 | CUSTOM 4 STEP WEDGE. MATERIAL: 2024-T3 ALUMINUM. STEP SIZES: .020",.040",.060",.090" +/-.001. PAD SIZE: .75" x .75". Includes Test Report Traceable to NIST. | 1 | |
| AFNDT-2008/MAG | AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD PT 3 32-42-05, PAGES 1-7 FIGURE 2 and 3. MATERIAL: MAGNESIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2008/SS | AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD PT 3 32-42-05, PAGES 1-7 FIGURE 2 and 3 & 32-42-05 FIGURE 11 PROCEDURE 1 PAGE 15. MATERIAL: 304 STAINLESS STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2009AL | 5 STEP WEDGE, 16mm, 17mm, 18mm, 19mm, 20mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square. Includes Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2011/4130 | 10 STEP CARBON STEEL WEDGE. STEP THICKNESS OF , .019", .028", .050", .096", .148", .202", .253", .301", .350" .400" +/-.001". 1.0" x 1.0" Step Pad Face. Material: 4130 Carbon Steel. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-2011/7075 | 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .019", .028", .050", .096", .148", .202", .253", .301", .350" .400" +/-.001". 1.0" x 1.0" Step Pad Face. Material: 7075-T651 Aluminum. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-2017-INC718 | BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-70-001. ALSO IN 53-10-01 PART 6 PAGE 5 FIGURE 1. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL: 718 INCONEL. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and Certific | 1 | |
| AFNDT-2030/2014-T6 | EDDY CURRENT SURFACE REFERENCE STANDARD, EDM NOTCHES .008", .020", .040" (.004W +/- .002), MATERIAL: 2014-T6 ALUMINUM. SIZE: 4.0"L x 1.0"W x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/2014-T651 | DDY CURRENT SURFACE REFERENCE STANDARD, EDM NOTCHES .008", .020", .040" (.004W +/- .002), MATERIAL: 2014-T651 ALUMINUM. SIZE: 4.0"L x 1.0"W x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/2024 | EDDY CURRENT SURFACE REFERENCE STANDARD, EDM NOTCHES .008", .020", .040" (.004W +/- .002), MATERIAL: 2024-T3 ALUMINUM. SIZE: 4.0"L x 1.0"W x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/2024-T6 | EDDY CURRENT SURFACE REFERENCE STANDARD, EDM NOTCHES .008", .020", .040" (.004W +/- .002), MATERIAL: 2024-T6 ALUMINUM. SIZE: 4.0"L x 1.0"W x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/300M | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), MATERIAL: 300M STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/6061-T6 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008"(0.2mm), .020"(0.5mm), .040"(1.0mm) (.004"W +/- .002), 6061-T6 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance and Material Certification. | 1 | |
| AFNDT-2030/MAR | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008"(0.2mm), .020"(0.5mm), .040"(1.0mm) (.004"W +/- .002). MATERIAL: 250 MARAGING STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/N200 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), MATERIAL: NICKEL 200. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2031/4340 | 7 STEP REFERENCE BLOCK ..STEP PAD SIZE: 1.0" X 1.0" MATERIAL: 4340 CRES STEEL. STEP RANGE:.040", .080", .160", .250", .300", .400", .500". +/-.001". Includes certification report traceable to NIST... | 1 | |
| AFNDT-2031/6AL-4V | 7 STEP REFERENCE BLOCK ..STEP PAD SIZE: 1.0" X 1.0" MATERIAL: 6AL-4V TITANIUM. STEP RANGE:.040", .080", .160", .250", .300", .400", .500" +/- .001". Includes certification report traceable to NIST... | 1 | |
| AFNDT-2031/7075 | 7 STEP REFERENCE BLOCK ..STEP PAD SIZE: 1.0" X 1.0" MATERIAL: 7075-T6 ALUMINUM. STEP RANGE:.040", .080", .160", .250", .300", .400", .500" +/- .001". Includes certification report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2037/7075T6 | 10 STEP WEDGE SUPPLIED WITH HOLDING BLOCK. STEP SIZES: .040", .080", .120", .160", .200", .240", .280", .320", .360", .400" +/-.001". Material: 7075-T6 ALUMINUM. PAD SIZE: .75" x .75". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2040AL | 4 STEP WEDGE. Material: 2024-T351 Aluminum. Step Sizes: 0.5mm, 1.0mm, 1.5mm, 2.0mm, +/-0.05mm Pad Size: 19mm x 19mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2047TI | 4 STEP WEDGE. PAD SIZE 20mm X 20mm. STEP SIZES: 0.6mm, .2mm, 3mm, 4mm +/- .05mm. MATERIAL 6AL-4V | 1 | |
| AFNDT-2062AL | Custom 10 Step Block, 2.0mm, 4.0mm, 6.0mm, 8.0mm, 10.0mm, 12.0mm, 14.0mm, 16.0mm, 18.0mm and 20.0mm, Thickness Tolerance ±.05mm. Pad Size: 19mm X 19mm. Material: 7075-T6 Aluminum. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-2062CS | Custom 10 Step Block, 2.0mm, 4.0mm, 6.0mm, 8.0mm, 10.0mm, 12.0mm, 14.0mm, 16.0mm, 18.0mm and 20.0mm, Thickness Tolerance ±.05mm. Pad Size: 19mm X 19mm. Material: 1018 Carbon Steel. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-2062SS | Custom 10 Step Block, 2.0mm, 4.0mm, 6.0mm, 8.0mm, 10.0mm, 12.0mm, 14.0mm, 16.0mm, 18.0mm and 20.0mm, Thickness Tolerance ±.05mm. Pad Size: 19mm X 19mm. Material: 304 Stainless Steel. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-2062Ti | Step Block, 2.0mm, 4.0mm, 6.0mm, 8.0mm, 10.0mm, 12.0mm, 14.0mm, 16.0mm, 18.0mm and 20.0mm, Thickness Tolerance ±.02mm. Pad Size: .75” x .75”. Material: 6AL-4v Titanium. Includes Certification Traceable to NIST. | 1 | |
| AFNDT-2063AL | 11/16" HOLE STANDARD IN 7075-T6 with .030" x .030" CORNER EDM NOTCH. MATERIAL SIZE 2.0" x 2.0" x .375". Includes Test Report and Certificate of Conformance.. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2064/AL | SAFRAN MESSIER-BUGATTI-DOWTY ET SURFACE REFERENCE STANDARD 32-09-01 FIGURE 67,GRAPHIC-32-09-01-041-008-A01. MATERIAL: 2024-T351 ALUMINUM. Includes Test Report and Certificate of conformance. | 1 | |
| AFNDT-2067/1018 | 5 STEP WEDGE .100", .200",. 300", .400", .500" MATERIAL: 1018 CRES STEEL PAD SIZE: .75" X .75" TOLEREANCE = +/- .001. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2067/304S | 5 STEP WEDGE .100", .200",. 300", .400", .500" MATERIAL: 304 STAINLESS STEEL. PAD SIZE: .75" X .75" TOLEREANCE = +/- .001. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2067/4340 | 5 STEP WEDGE .100", .200",. 300", .400", .500" MATERIAL: 4340 CARBON STEEL. PAD SIZE: .75" X .75" TOLEREANCE = +/- .001. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2067/6AL-4V | 5 STEP WEDGE .100", .200", . 300", .400", .500" MATERIAL: 6AL-4V TITANIUM. PAD SIZE: .75" X .75", TOLERANCE = +/- .001". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2067/7075T6 | 5 STEP WEDGE .100", .200",. 300", .400", .500" MATERIAL: 7075-T6 ALUMINUM. PAD SIZE: .75" X .75" TOLEREANCE = +/- .001. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2067/7075T7 | 5 STEP WEDGE .100", .200",. 300", .400", .500" MATERIAL: 7075-T7 ALUMINUM. PAD SIZE: .75" X .75" TOLEREANCE = +/- .001. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2067/TI | 5 STEP WEDGE .100"(2.54mm), .200"(5.08mm),. 300"(7.62mm), .400"(10.16mm), .500"(12.7mm) MATERIAL: 6AL-4V TiTANIUM. PAD SIZE: .75" X .75". Includes Test Report and Certificate of Conformance. ***NOTE: Must Engrave Both inch and Metric conversions on... | 1 | |
| AFNDT-2067AL | 5 STEP WEDGE .100", .200",. 300", .400", .500" MATERIAL: 2024-T3 ALUMINUM. PAD SIZE: 1.0" X 1.0" TOLEREANCE = +/- .001. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2072AL | 5 STEP ALUMINUM WEDGE. Step Sizes: .600", .700", .800", .900" ,1.00", Tolerance: +/- .001'. Material: 2024-T3 Aluminum. Pad Size: 1.0"X1.0" Sq. 5.0"x1.0" LONG. Includes certification report traceable to NIST. Manufactured in accordance to Airbus A33 | 1 | |
| AFNDT-2074 | CUSTOM SURFACEREFERENCE STANDARD, 3 EDM SLOTS .008",.020",.040" .007" MAX WIDTH. MATERIAL: 7075-T6 ALUMINUM. SIZE: 4.0 x 1.5 x .25". Includes Test Report and Certifictate of Conformance. | 1 | |
| AFNDT-2075/1018 | 5 STEP WEDGE .020", .040", .060", .080", .100". TOLERANCE +/-.001". MATERIAL: 4340 or 4130 CARBON STEEL . PAD SIZE:75"x.75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2075/AL-1 | 5 STEP WEDGE .020", .040", .060", .080", .100". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2075/AL-2 | 5 STEP WEDGE .020", .040", .060", .080", .100". TOLERANCE +/-.001". MATERIAL: 2024-T3 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2075/INC | 5 STEP WEDGE .020", .040", .060", .080", .100". TOLERANCE +/-.001". MATERIAL: 718 INCONEL. PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2075/TI | 5 STEP WEDGE .020", .040", .060", .080", .100". TOLERANCE +/-.001". MATERIAL: 6AL-4V TITANIUM . PAD SIZE: 75" x .75" .Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2075CS | 5 STEP WEDGE .020", .040", .060", .080", .100". TOLERANCE +/-.001". MATERIAL: 4340 CARBON STEEL . PAD SIZE:75"x.75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2075SS | 5 STEP WEDGE .020", .040", .060", .080", .100". TOLERANCE +/-.001". MATERIAL: 304 STAINLESS. PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2086CS | 4 STEP CALIBRATION BLOCK. STEP SIZES: .050", .075", .100", .125" ±.001, 3/4" X 3/4" PAD SIZE. MATERIAL: 1018 CARBON STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2086SS | 4 STEP CALIBRATION BLOCK. STEP SIZES: .050", .075", .100", .125" ±.001, 3/4" X 3/4" PAD SIZE. MATERIAL: 304 STAINLESS STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2088/2024-T3 | METRIC 10 STEP CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 20mm X 20mm. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2088/304SS | METRIC 10 STEP CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 20mm X 20mm. Material: 304 Stainless Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2088/6AL-4V | METRIC 10 STEP CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 20mm X 20mm. Material: 6AL-4V Titanium. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2088/7075-T6 | METRIC 10 STEP CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 20mm X 20mm. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2088CS | METRIC 10 STEP CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 20mm X 20mm. Material: 4340 Carbon Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2089/7075T6 | 2 STEP WEDGE. STEP SIZE: .500", 1.0", +/-.001". MATERIAL: 7075-T6 ALUMINUM 2.0" x 2.0" PAD SIZE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2090AL | 5 STEP WEDGE, 11mm, 12mm, 13mm, 14mm, 15mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square. Includes Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2091/MAG | 5 STEP CALIBRATION BLOCK, STEP THICKNESSES: .050, .100, .150 , .200, .250. STEP PAD SIZE: 1.0" x 1.0", MATERIAL: MAGNASESIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2094AL | 5 STEP WEDGE .550", .600", .650", .700", .750". TOLERANCE +/-.001". MATERIAL: 2024-T3 ALUMINUM. PAD SIZE: 750" x .750" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2094SS | 5 STEP WEDGE .550", .600", .650", .700", .750". TOLERANCE +/-.001". MATERIAL: 304 STAINLESS STEEL. PAD SIZE: 750" x .750" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2094TI | 5 STEP WEDGE .550", .600", .650", .700", .750". TOLERANCE +/-.001". MATERIAL: 6AL-4V TITANIUM. PAD SIZE: 750" x .750" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2095 | 5 STEP WEDGE W/ BASE, .016", .020", .040", .050", .080", Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2097AL | 7 STEP WEDGE. STEP SIZES: .030", .040", .050", .060", .070", .080", and .090" +/- .001". PAD SIZE: .75"x.75", MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2098/2024-T3 | 5 STEP WEDGE 2.5mm, 5.0mm,7.5mm, 10.0mm, 12.5mm +/- 0.05mm, Pad Size: 25mm x 25mm. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2098/7075T6 | 5 STEP WEDGE 2.5mm, 5.0mm,7.5mm, 10.0mm, 12.5mm +/- 0.05mm, Pad Size: 25mm x 25mm. Material: 7075-T6 Aluminum Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2098/7175 | 5 STEP WEDGE 2.5mm, 5.0mm,7.5mm, 10.0mm, 12.5mm +/- 0.05mm, Pad Size: 25mm x 25mm. Material: 7175-T73 Aluminum Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2103SS/E | 5 STEP WEDGE .100", .200",. 300", .400", .500" MATERIAL: 304 STAINLESS STEEL. PAD SIZE: .75" x .75" TOLEREANCE = +/- .001. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2104/AL | 5 STEP WEDGE .020", .040", .060", .080", .100". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 1.0" x 1.0" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2105AL | 5 STEP WEDGE .100", .200",. 300", .400", .500" MATERIAL: 2024-T3 ALUMINUM. PAD SIZE: .75" x .75" TOLEREANCE = +/- .001. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2105TI | 5 STEP WEDGE .100", .200",. 300", .400", .500" MATERIAL: 6AL-4V TITANIUM. PAD SIZE: .75" x .75" TOLEREANCE = +/- .001. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2106/2024 | 5 STEP WEDGE .020", .060", .150", .300", .600". TOLERANCE +/-.001". MATERIAL: 2024-T3 ALUMINUM . PAD SIZE: 1.0" x 1.0" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2106/7075 | 5 STEP WEDGE .020", .060", .150", .300", .600". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM . PAD SIZE: 1.0" x 1.0" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2107/4340 | EDDY CURRENT SURFACE REFERENCE STANDARD. EDM FLAWS: .008", .020", .040" (.005" Maximum Width). MATERIAL: 4340 STEEL. SIZE: 1.0"W x 4.0"L x .25"H. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2107/6AL4V | EDDY CURRENT SURFACE REFERENCE STANDARD. EDM FLAWS: .008", .020", .040" (.005" Maximum Width). MATERIAL: 6AL-4V TITANIUM. SIZE: 1.0"W x 4.0"L x .25"H. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2107/7075T6 | EDDY CURRENT SURFACE REFERENCE STANDARD. EDM FLAWS: .008", .020", .040" (.005" Maximum Width). MATERIAL: 7075-T6 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25"H. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2109 | 15 Hole aluminum reference standard, material 7075-T6, hole sizes: 1/8, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4, 17/64, 9/32, 19/64, 5/16, 21/64, 11/32, 23/64. With .030 x .030 and .020 x .020 Corner EDM Notches. Includes Test Report and Certificat | 1 | |
| AFNDT-2113/2024 | 10 PIECE SHIM THICKNESS SET. SHIM SIZE: 0.787" x 0.787". THICKNESSES: .020", .032", .040", .050", .063", .070", .080", .090", .100", .125". Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2113/7075 | 10 PIECE SHIM THICKNESS SET. SHIM SIZE: 0.787" x 0.787". THICKNESSES: .020", .032", .040", .050", .063", .070", .080", .090", .100", .125". Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2114AL | EDDY CURRENT SURFACE REFERENCE STANDARD, EDM NOTCHES .008", .020", .040" (.006W +/- .001). BLOCK SIZE:3.156 "L x 1.375"W x .312"H. MATERIAL: 2024-T3 ALUMINUM.. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2117AL | 6 STEP THICKNESS STANDARD. STEP SIZES: .050", .100", .200", .300", .400, .500" +/-.001". PAD SIZE 1.0" x 1.0". MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2118 | CUSTOM 6 STEP BLOCK, 0.5mm, 1mm,2mm, 3mm, 4mm, 5mm +/- .05mm . Pad Size: .750" x .750" Material- 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2119AL | 5 STEP WEDGE, 11mm, 12mm, 13mm, 14mm, 15mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square. Includes Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2121AL | 5 STEP WEDGE .300", .350", .400", .450", .500". TOLERANCE +/-.001". MATERIAL: 2024-T3 ALUMINUM. PAD SIZE: 750" x .750" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2121SS | 5 STEP WEDGE .300", .350", .400", .450", .500". TOLERANCE +/-.001". MATERIAL: 304 STAINLESS STEEL. PAD SIZE: 750" x .750" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2121TI | 5 STEP WEDGE .300", .350", .400", .450", .500". TOLERANCE +/-.001". MATERIAL: 6AL-4V TITANIUM. PAD SIZE: 750" x .750" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2125/AL | CUSTOM MULTI HOLE ET STANDARD. MATERIAL: 2024-T3 ALUMINUM. HOLE SIZES: 3/16", 7/32", 1/4", 5/16", 3/8", 7/16", 1/2", 9//16", 5/8", 3/4". EDM NOTCH: .030" x .030" x .005" +/-.002" and .020" x .020" x .005" +/-.002". Includes Test Report and Certificate o | 1 | |
| AFNDT-2125/S | CUSTOM MULTI HOLE ET STANDARD. MATERIAL: 4130 STEEL. HOLE SIZES: 3/16", 7/32", 1/4", 5/16", 3/8", 7/16", 1/2", 9//16", 5/8", 3/4". EDM NOTCH: .030" x .030" x .005" +/-.002" and .020" x .020" x .005" +/-.002". Includes Test Report and Certificate of Conf | 1 | |
| AFNDT-2127 | SAFRAN MESSIER -BUGATTI-DOWTY REFERENCE STANDARD Material aluminum 7075-T6; Thickness 1/2". - Number of holes 5;- hole diameter 9/16 in, 10/16 in, 11/16 in, 12/16 in, 13/16 in; EDM notch in each hole: thru the thickness, depth and width in according with | 1 | |
| AFNDT-2129CS | LEONDRO CALIBRATION BLOCK PAGE 18 FIGURE 3 S.B. N°169-165. 2 STEP BLOCK, MATERIAL: LOW CARBON STEEL SUCH AS 1018, 4130 or 4340. Step Size: 2-3mm and 10-11mm. ±.0.1mm, PAD SIZE: 20mm X 20mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2131 | CUSTOM 6 STEP BLOCK : (1mm, 2mm, 4mm, 6mm, 8mm, 10mm, +/- .05mm thick. total of 6 steps. Material- 2024-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2142 | 6 STEP WEDGE .200", .300",. 400", .500", .650" , .800" MATERIAL: 7075-T6 ALUMINUM. LENGTH: 0.8" x 4.8". TOLERANCE = +/- .001. Includes Test Report and Certificate of Conformance | 1 | |
| AFNDT-2143 | 6 STEP WEDGE .024", .040",. 060", .080", .100" , .150" MATERIAL: 7075-T6 ALUMINUM. LENGTH: 0.8" Wide x 1.1" Long for the first and last step. 0.8" x 1.1" long for the 4 inside steps. Total Length = 5.4" Long. TOLEREANCE = +/- .001. Includes Hold... | 1 | |
| AFNDT-2145AL | Custom calibration standard containing 4 hole sizes of 5mm, 6mm, 8mm and 10mm. Each hole has a .100" x .100" x .005" W +/- .002". Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2145MG | Custom calibration standard containing 4 hole sizes of 5mm, 6mm, 8mm and 10mm. Each hole has a .100" x .100" x .005" W +/- .002". Material: Mgnesium. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2146AL | ALUMINUM CHEM MILL MEASURING STEP WEDGE. MATERIAL: 2024-T3 ANODISED ALUMINUM. STEPS: .024, .028, .031, .035, .039, .044, .048, .052, .056, .059 +/-.002". Includes Test eport and Certificate of Conformance. | 1 | |
| AFNDT-2146S | STEEL CHEM MILL MEASURING STEP WEDGE. MATERIAL: 4340 STEEL CHROME COATED. STEPS: .024, .028, .031, .035, .039, .044, .048, .052, .056, .059 +/-.002". Includes Test eport and Certificate of Conformance. | 1 | |
| AFNDT-2160/19MM | Custom ASME ultrasonic phased array PAUT Calibration Block per customer supplied drawing. 270mm x 150mm x 19mm. Material: 1018 Carbon Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2160/38MM | Custom ASME ultrasonic phased array PAUT Calibration Block per customer supplied drawing. 330mm x 150mm x 38mm. Material: 1018 Carbon Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2161/4130 | 10 STEP CARBON STEEL WEDGE. STEP THICKNESS OF: 1.10", 1.20", 1.30", 1.40", 1.50", 1.60", 1.70", 1.80", 1.90" 2.00" +/-.001". 0.75" x 0.75" Step Pad Face. Material: 4130 Carbon Steel, Nickel Plated. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-2227Ti-1 | 8 Hole Calibration Standard, Hole Sizes; 1/8" 5/32", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", EDM NOTCH: .050" x .050" x .005" +0.000/-.002" BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, 737 PT 6 51-00-00 FIG 3 PROCEDURE 17, PG.8 MATERIAL(6AL-4V) TIT | 1 | |
| AFNDT-3001 | Embraer 170 reference standard with a .473" diameter hole. Per NDTM PT1 51-00-00-916-802-A , 1.4mm x 1.4mm +/-.05mm long x 0.1mm +/-.05 wide corner EDM notch. Material: 7050-T7 Aluminum. Block size 2.0" x 2.0" x .375". Includes Test Report and Certifica | 1 | |
| AFNDT-3003INC | 2 STEP WEDGE. MATERIAL: INCONEL 718 Dimension: 1.37” L x 1.0” W x Step thickness 0.016” & 0.050 +/- .001". Step Pad Size: .685” x 1.0" Includes Certification Report... | 1 | |
| AFNDT-3003SS | 2 STEP WEDGE. MATERIAL: 304 STAINLESS STEEL, Dimension: 1.37” L x 1.0” W x Step thickness 0.016” & 0.050 +/- .001". Step Pad Size: .685” x 1.0". Includes Certification Report. | 1 | |
| AFNDT-3003TI | 2 STEP WEDGE. MATERIAL: 6AL-4V Titanium - AMS 4919 Dimension: 1.37” L x 1.0” W x Step thickness 0.016” & 0.035 +/- .001". Step Pad Size: .685” x 1.0". Includes Certification Report... | 1 | |
| AFNDT-3006AL | Step Wedge: Material: 2024-T3 Aluminium, 5 Steps total (12mm, 14mm, 16mm, 18mm and 20mm). Tolerance = +/-0.05mm. Step pad size: 1.0” x 1.0". Includes Mill Test Report, Calibration Report and Certificate of Conformance. | 1 | |
| AFNDT-3008AL | 5 STEP WEDGE .020", .040", .060", .080", .100". TOLERANCE +/-.001". MATERIAL: ANODIZED 2024-T4 ALUMINUM .PAD SIZE: 75" x .75" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3010/304 | 11 STEP WEDGE. STEP THICKNESS OF , .050", .100", .200", .300", .400", .500", .600", .700", .800" .900", 1.0" +/-.001". Pad Size: .75" x 75" . Material: 304 Stainless Steel. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3010/7075-T6 | METRIC 10 STEP CALIBRATION BLOCK, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm ± .05mm. Pad Size: 20mm X 20mm. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3010/7075-T7 | 11 STEP WEDGE. STEP THICKNESS OF , .050", .100", .200", .300", .400", .500", .600", .700", .800" .900", 1.0" +/-.001". Pad Size: .75" x 75" . Material: 7075-T7 ALUMINUM. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3010/MAG | 11 STEP WEDGE. STEP THICKNESS OF , .050", .100", .200", .300", .400", .500", .600", .700", .800" .900", 1.0" +/-.001". Pad Size: .75" x 75" . Material: AZ31B MAGNESIUM. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3012AL | 9 HOLE REFERENCE STANDARD PER BOEING 737 NTM 51-00-00 PG 9 FIGURE 3 SPECIFICATION. MATERIAL: 7075-T6 ALUMINUM. HOLE SIZES, 1.0",1.125",1.250", 1.375", 1.500"", 1.625", 1.750", 1.875", 2.00", .030"x.030" and .020"x.020" CORNER NOTCH .005+/-.002. Includ... | 1 | |
| AFNDT-3013/2024 | 5 STEP WEDGE, 1mm, 2mm, 3mm, 4mm, 5mm, +/- .05mm. Material: 2024 Aluminum. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3013/304 | 5 STEP WEDGE, 1mm, 2mm, 3mm, 4mm, 5mm, +/- .05mm. Material: 304 Stainless Steel. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3013/4340 | 5 STEP WEDGE, 1mm, 2mm, 3mm, 4mm, 5mm, +/- .05mm. Material: 4340 Cres Steel. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3013/7075 | 5 STEP WEDGE, 1mm, 2mm, 3mm, 4mm, 5mm, +/- .05mm. Material: 7075 Aluminum. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3013/INC | 5 STEP WEDGE, 1mm, 2mm, 3mm, 4mm, 5mm, +/- .05mm. Material: 718 Inconel. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3013/TI | 5 STEP WEDGE, 1mm, 2mm, 3mm, 4mm, 5mm, +/- .05mm. Material: 6AL-4V Titanium. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3013AL | 6 STEP WEDGE, 0.5mm,1mm, 2mm, 3mm, 4mm, 5mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3013AL-1 | Metric 6 Step Wedge, 0.5mm, 1mm, 2mm, 3mm, 4mm, 5mm, +/- .05mm. Material: 2024-T3 Aluminum Supplied with Delrin Holding Block. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3013CS | 6 STEP WEDGE, 0.5mm 1mm, 2mm, 3mm, 4mm, 5mm, +/- .05mm. Material: 4340 Carbon Steel. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3013TI | 5 STEP WEDGE, 1mm, 2mm, 3mm, 4mm, 5mm, +/- .05mm. Material: 6AL-4V Titanium. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3014AL | 8 STEP WEDGE, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3014AL-1 | 8 STEP BLOCK - 2 UNIT - AL BLOCK CONSIST OF 8 DIFFERENT THICKNESS (1MM, 2MM, 3MM, 4MM, 5MM, 6MM, 7MM, 8MM)AS BELOW. - MATERIAL AL2024 | 1 | |
| AFNDT-3014CS | 8 STEP WEDGE, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .05mm. Material: 4340 Carbon Steel. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3014SS | 8 STEP WEDGE, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .05mm. Material: 304 Stainless Steel. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3014TI | 8 STEP WEDGE, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .05mm. Material: 6AL-4V Titanium. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3016-2024T3 | Contains 12 hole sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. ( .030 x .030 Corner EDM Notch and 3 Surface EDM Notches .010", .020", .040" Deep x .750" Long.) Material: 2024-T3 Aluminum. Includes Test Report | 1 | |
| AFNDT-3017/7175 | 5 STEP WEDGE, 2.5mm, 5.0mm,7.5mm, 10.0mm, 12.5mm +/- 0.05mm, Pad Size: 19mm x 19mm. Material: 7175-T73 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3017AL | 5 STEP WEDGE 2.5mm, 5.0mm,7.5mm, 10.0mm, 12.5mm +/- 0.05mm, Pad Size: 19mm x 19mm. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3017CS | 5 STEP WEDGE 2.5mm, 5.0mm,7.5mm, 10.0mm, 12.5mm +/- 0.05mm, Pad Size: 19mm x 19mm. Material: 4340 Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3018TI | CUSTOM TITANIUM BORE HOLE STANDARD WITH 2.200" BORE with 2 EDM FLAWS .030" CORNER NOTCH, .060"x.030" MID-BORE NOTCH. MATERIAL: 6AL-4V. SIZE 3.0" X 3.0" X 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3020AL | 8 STEP THICKNESS STANDARD. STEP SIZES: .015", .025", .040", .060", .080", .100", .150", .200" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3020CS | 8 STEP THICKNESS STANDARD. STEP SIZES: .015", .025", .040", .060", .080", .100", .150", .200" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 1018 CARBON STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3020TI | 8 STEP THICKNESS STANDARD. STEP SIZES: .015", .025", .040", .060", .080", .100", .150", .200" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3021AL | Custom Metric 6 Step Block. Step Thicknesses of 0.5mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm. (Tolerance: +/- 0.2mm). Pad Size: 15mm X 15mm, (Tolerance: +/- 0.5mm) Material: 2024-T3 Aluminum. Includes Certification Report and Certificate of Conformance. | 1 | |
| AFNDT-3022 | BOMBARDIER SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL 7075-T6 ALUMINUM. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and Certificate of Conformance. ( Similar to Specification BD-700 PT 6 ... | 1 | |
| AFNDT-3023 | BOMBARDIER SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL 7050-T74 ALUMINUM. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and Certificate of Conformance. ( Similar to Specification BD-700 PT 6... | 1 | |
| AFNDT-3026AL | EDDY CURRENT SURFACE REFERENCE STANDARD Leonardo Helicopters SB No. 109EP-158. MATERIAL: 7475-T7 ALUMINUM. SIZE: 1.0" x 3.0" x .25" EDM SLOT (0.5mm DEEP) x (0.05-0.25mm WIDE) +/-.03mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3029/2024 | 6 STEP WEDGE .100", .200",. 300", .400", .500" , .600". MATERIAL: 2024-T3 ALUMINUM. STEP PAD SIZE: .787" x .787". TOLERANCE = +/- .001. Includes Test Report and Certificate of Conformance | 1 | |
| AFNDT-3029/7075 | 6 STEP WEDGE .100", .200",. 300", .400", .500" , .600". MATERIAL: 7075-T6 ALUMINUM. STEP PAD SIZE: .787" x .787". TOLERANCE = +/- .001. Includes Test Report and Certificate of Conformance | 1 | |
| AFNDT-3031 | 4 STEP WEDGE 2mm, 3mm, 4mm, 5mm, +/- .05mm. Material: Magnesium RZ5. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3033/17-4 | 5 STEP WEDGE, .100", .200",. 300", .400", .500" MATERIAL: 17-4PH STEEL. PAD SIZE: .75" X .75" TOLEREANCE = +/- .002 | 1 | |
| AFNDT-3033/718 | 5 STEP WEDGE, .100", .200",. 300", .400", .500" MATERIAL: 718 inconel. PAD SIZE: .75" X .75" TOLEREANCE = +/- .002 | 1 | |
| AFNDT-3035SS | EDDY CURRENT SURFACE REFERENCE STANDARD. EDM NOTCHES: .005", .010", .020", .060" (.005"W +/- .002, MAX.007" WIDE). MATERIAL: 301 1/2 HARD STAINLESS STEEL(MIL-S-5059) 1.0"W x 4.0"L x .125", NOTE: .750" DISTANCE BETWEEN EACH NOTCH. Includes Test Repor... | 1 | |
| AFNDT-3036AL | CUSTOM 2 HOLE EDDY CURRENT REFERENCE STANDARD. MATERIAL: 7075-T6 ALUMINUM. HOLE SIZES: .250" and .875" WITH a .030" x .030" x .007" MAX WIDTH CORNER EDM NOTCH IN EACH HOLE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3037 | CUSTOM EDDY CURRENT HOLE REFERENCE STANDARD. MATERIAL: 718 INCONEL. HOLE SIZE: .256"Ø WITH a 0.1" x 0..1" x .010" +/- .002" EDM NOTCH IN THE BOTTOM RADIUS OF THE HOLE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3039 | CUSTOM SURFACE CALIBRATION BLOCK. MATERIAL: 7075-T73 ALUMINUM. EDM NOTCH SIZE: 1.52mm(.060") LONG x 0.13mm(.0051") WIDE x 0.76mm(.030") DEEP. +/- .05mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3045-2024T3 | 10 STEP REFERENCE BLOCK .010", .020", .030", .040", .050", .060", .070", .080", .090", .100", +/-.001" . Material: 7075-T6 ALUMINUM, Pad Size: .75" x 75" with Acetal( Delrin) holding block . Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3045-7075T6 | 10 STEP REFERENCE BLOCK .010", .020", .030", .040", .050", .060", .070", .080", .090", .100", +/-.001" . Material: 7075-T6 ALUMINUM, Pad Size: .75" x 75" with Acetal( Delrin) holding block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3045/1018 | 10 STEP REFERENCE BLOCK, Step Pad Thicknesses: .010", .020", .030", .040", .050", .060", .070", .080", .090", .100", +/-.001" . Material: 1018 Steel, Pad Size: .75" x 75" with Acetal( Delrin) holding block. Includes Test Report and Certificate of Confo | 1 | |
| AFNDT-3053AL | 11 STEP THICKNESS STANDARD. STEP SIZES: .010", .020", .030", .040", .050", .060", .070", .080", .090", ..100", .110" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3054/CS | 5 STEP WEDGE .100", .125",. 150", .175", .200" MATERIAL: 4340 CARBON STEEL. PAD SIZE: .75" X .75" TOLEREANCE = +/- .001 | 1 | |
| AFNDT-3055 | EDDY CURRENT SURFACE REFERENCE STANDARD. Low Hydrogen Embrittlement Cadmium-Titaniium Alloy Plating per BAC5804. 3 EDM FLAWS ON BOTH SIDES. ONE SIDE UNPLATED(BARE). NOTCH DEPTHS : .010", .020", .050". NOTCH WIDTH: (.007" +/- .002"). MATERIAL: 4330 STE... | 1 | |
| AFNDT-3057AL | Custom 3 Step Thin Wedge with Holder. Step Thicknesses: 0.015", 0.030" and 0.070". Pad Size: 1.0" x 1.0" x 3.0" Total Length. Step ThicknessTolerence +/- .001. Material: 7075-T6 Aluminum Also Contains 2 EDM Flaws .010" and .020" Deep x .005" Wide x .3... | 1 | |
| AFNDT-3057ST | Custom 3 Step Thin Wedge with Holder. Step Thicknesses: 0.015", 0.030" and 0.070". Pad Size: 1.0" x 1.0" x 3.0" Total Length. Step ThicknessTolerence +/- .001. Material: 4340 Cres Steel. Also Contains 2 EDM Flaws .010" and .020" Deep x .005" Wide x .... | 1 | |
| AFNDT-3057TI | Custom 3 Step Thin Wedge with Holder. Step Thicknesses: 0.015", 0.030" and 0.070". Pad Size: 1.0" x 1.0" x 3.0" Total Length. Step ThicknessTolerence +/- .001. Material: 6AL-4V Titanium Also Contains 2 EDM Flaws .010" and .020" Deep x .005" Wide x .30... | 1 | |
| AFNDT-3058/INC | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .5mm, 1.0mm, 2.0mm x (.006"Wide +/- .001). MATERIAL: 718 Inconel. SIZE: 1.0" Wide x 4.0" Long x 0.25" Thick. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3058SS | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES: 0.5mm, 1.0mm, 2.0mm x (.005"Wide + .000/-.002). MATERIAL: 304 Stainless Steel. SIZE: 1.0" Wide x 4.0" Long x 0.25" Thick. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3059 | Custom Eddy Current 2 Hole Calibration Standard per Customer Supplied Drawing. Material: 7050-T7451. Hole Sizes: .516"Ø and .812"Ø with a total of 4 EDM Notches 0.021" x 0.021" x .004" Wide Max. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3060 | Custom Eddy Current 2 Hole Calibration Standard per Customer Supplied Drawing. Material: 7050-T7451. Hole Sizes: .252"Ø and .516"Ø with a total of 4 EDM Notches 0.021" x 0.021" x .004" Wide Max. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3064/2024AL | 7 STEP REFERENCE BLOCK WITH ACETAL( DELRIN ) HOLDING BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 2024-T3 ALUMINUM. STEP RANGE:.020", .040", .060", .080", .100", .150", .200" +/- .002". Includes certification report traceable to NIST. | 1 | |
| AFNDT-3064/6061AL | 7 STEP REFERENCE BLOCK WITH ACETAL( DELRIN ) HOLDING BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 6061-T6 ALUMINUM. STEP RANGE:.020", .040", .060", .080", .100", .150", .200" +/- .002". Includes certification report traceable to NIST. | 1 | |
| AFNDT-3064/7075AL | 7 STEP REFERENCE BLOCK WITH ACETAL( DELRIN ) HOLDING BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 7075-T6 ALUMINUM. STEP RANGE:.020", .040", .060", .080", .100", .150", .200" +/- .002". Includes certification report traceable to NIST. | 1 | |
| AFNDT-3065/2024AL | 6 STEP REFERENCE BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 2024-T3 ALUMINUM. STEP RANGE:.100", .250", .400", .600", .800", 1.00" +/- .002". Includes certification report traceable to NIST. | 1 | |
| AFNDT-3065/6061AL | 6 STEP REFERENCE BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 6061-T6 ALUMINUM. STEP RANGE:.100", .250", .400", .600", .800", 1.00" +/- .002". Includes certification report traceable to NIST. | 1 | |
| AFNDT-3065/7075AL | 6 STEP REFERENCE BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 7075-T6 ALUMINUM. STEP RANGE:.100", .250", .400", .600", .800", 1.00" +/- .002". Includes certification report traceable to NIST. | 1 | |
| AFNDT-3066/4130 | 5 STEP REFERENCE BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 4130 STEEL. STEP RANGE: .200", .400", .600", .800", 1.00" +/- .002". Includes certification report traceable to NIST. | 1 | |
| AFNDT-3066/6AL4V | 5 STEP REFERENCE BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 6AL-4V TITANIUM. STEP RANGE: .200", .400", .600", .800", 1.00" +/- .002". Includes certification report traceable to NIST. | 1 | |
| AFNDT-3067/15-5PH | 8 STEP CALIBRATION BLOCK, INCLUDES ACETAL(DELRIN) HOLDING BLOCK. PAD SIZE 1.0" x1.0", STEP SIZE: .015", .030", .050", .080", .120", .160, .200, .300 +/- .005" Material: 15-5PH STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3068/4130 | 7 STEP REFERENCE BLOCK WITH ACETAL( DELRIN ) HOLDING BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 4130 STEEL. STEP RANGE:.020", .050", .080", .120", .160", .200", .300" +/- .010". Includes certification report traceable to NIST. | 1 | |
| AFNDT-3070/7475 | 6 STEP THICKNESS STANDARD. STEP SIZES: .030", .050", .100", .150", .300", .500" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7475-T7 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3070AL | 6 STEP THICKNESS STANDARD. STEP SIZES: .030", .050", .100", .150", .300", .500" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3071 | Custom designed eddy current multi-layer aircraft aluminum skin test specimen, drawing 2, sheets 1-4. reference standard for Central Piedmont Community College. Material: 2024-T3 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3072 | Custom designed eddy current aircraft calibration standard, Drawing 3, Sheets 1-3, for Central Piedmont Community College. Material: 2024-T3 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3073 TYPE 1 | Custom designed eddy current reference standard for Central Piedmont Community College. Material: 2024-T3 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3073 TYPE 2 | Custom designed eddy current reference standard for Central Piedmont Community College. Material: 2024-T3 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3073 TYPE 3 | Custom designed eddy current reference standard for Central Piedmont Community College. Material: 2024-T3 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3076AL | 7 STEP WEDGE, STEP SIZES OF .120", .150", .200", .250", .300", .350", and .400" +/- .001". PAD SIZE: 1.0" x 1.0", MATERIAL: 2024-T3 ALUMINUM. CLEAR ANODIZED FOR CORROSION PROTECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3076AL-1 | 7 STEP WEDGE, STEP SIZES OF .120", .150", .200", .250", .300", .350", and .400" +/- .001". PAD SIZE: 1.0" x 1.0", MATERIAL: 7075-T7 ALUMINUM. CLEAR ANODIZED FOR CORROSION PROTECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3076AL-2 | 7 STEP WEDGE, STEP SIZES OF .120", .150", .200", .250", .300", .350", and .400" +/- .001". PAD SIZE: 1.0" x 1.0", MATERIAL: 7050-T7 ALUMINUM. CLEAR ANODIZED FOR CORROSION PROTECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3077AL | 7 STEP WEDGE, STEP SIZES OF .450", .500", .550", .600", .650", .700", and .750" +/- .001". PAD SIZE: 1.0" x 1.0", MATERIAL: 2024-T3 ALUMINUM. CLEAR ANODIZED FOR CORROSION PROTECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3077AL-1 | 7 STEP WEDGE, STEP SIZES OF .450", .500", .550", .600", .650", .700", and .750" +/- .001". PAD SIZE: 1.0" x 1.0", MATERIAL: 7075-T7 ALUMINUM. CLEAR ANODIZED FOR CORROSION PROTECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3077AL-2 | 7 STEP WEDGE, STEP SIZES OF .450", .500", .550", .600", .650", .700", and .750" +/- .001". PAD SIZE: 1.0" x 1.0", MATERIAL: 7050-T7 ALUMINUM. CLEAR ANODIZED FOR CORROSION PROTECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3078AL | 7 STEP WEDGE, STEP SIZES OF .800", .850", .900", .950", 1.00", 1.50", and 2.00" +/- .001". PAD SIZE: 1.0" x 1.0", MATERIAL: 2024-T3 ALUMINUM. CLEAR ANODIZED FOR CORROSION PROTECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3079AL | 9 STEP WEDGE, STEP SIZES OF: .020", .030", .040", .050", .060", .070", .080", .090" and .100" +/- .001". PAD SIZE: 1.0" x 1.0", MATERIAL: 7075-T7 ALUMINUM. CLEAR ANODIZED FOR CORROSION PROTECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3079AL-1 | 9 STEP WEDGE, STEP SIZES OF: .020", .030", .040", .050", .060", .070", .080", .090" and .100" +/- .001". PAD SIZE: 1.0" x 1.0", MATERIAL: 7050-T7 ALUMINUM. CLEAR ANODIZED FOR CORROSION PROTECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3083/2205 | 5 STEP WEDGE 2.5mm, 5.0mm,7.5mm, 10.0mm, 12.5mm +/- 0.05mm, Pad Size: 20mm x 20mm. Material: 2205 Duplex Stainless Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3083SS | 5 STEP WEDGE 2.5mm, 5.0mm,7.5mm, 10.0mm, 12.5mm +/- 0.05mm, Pad Size: 20mm x 20mm. Material: 304 Stainless Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3084AL | 5 STEP WEDGE .100", .200",. 300", .400", .500" MATERIAL: AMS4144 2219-T851 ALUMINUM. PAD SIZE: .75" X .75" TOLEREANCE = +/- .001. Clear Anodized for corrosion protection. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3101 | Thin Material Step Wedge: 7075-T6 Aluminium, 5 Steps total (0.5mm, 1.00mm, 1.5mm, 2.00mm and 2.5mm). Step pad size: 20mm x 20mm. Anodized. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3102AL/7075 | 9 STEP WEDGE .500", .625",. 750", .875", 1.0" , 1.125", 1.250", 1.375", 1.50". MATERIAL: 7075-T6 ALUMINUM WITH GRAIN DIRECTION. STEP PAD SIZE: 1.0" x 1.0". TOLERANCE = +/- .001. Includes Test Report and Certificate of Conformance | 1 | |
| AFNDT-3105CS | 5 STEP WEDGE 12.5mm, 15.0mm,17.5mm, 20.0mm, 25.0mm +/- 0.05mm, Pad Size: 19mm x 19mm. Material: 1018 Carbon Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3106TI | 7 STEP CALIBRATION BLOCK. MATERIAL: 6AL-4V TITANIUM. STEP THICKNESS: 0.035", 0.070", 0.105", 0.140", 0.175", .210" 0.250" +/- .001". STEP PAD SIZE: .75" x .75". Includes certification Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3108CS | CUSTOM 7 STEP BLOCK, 0.5mm, 1mm,2mm, 3mm, 4mm, 5mm, 6mm +/- .05mm . Pad Size: .750" x .750" Material- 4340 Carbon Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3108TI | CUSTOM 7 STEP BLOCK, 0.5mm, 1mm,2mm, 3mm, 4mm, 5mm, 6mm +/- .05mm . Pad Size: .750" x .750" Material- 6AL-4V Titaniuml. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3110A | Custom Multi-Hole Standard made to the Specifications of 99A53003001101. Material: 2024-T351. 48 Total Hole Sizes: 33/64, 17/32, 35/64, 9/16, 37/64, 19/32, 39/64, 5/8, 41/64, 21/32,43/64, 11/16. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3110B | Custom Multi-Hole Standard made to the Specifications of 99A53003001101. Material: 2024-T351. 36 Total Hole Sizes: 45/64, 23/32, 47/64, 3/4, 49/64, 25/32, 51/64, 13/16, 53/64. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3110C | Custom Multi-Hole Standard made to the Specifications of 99A53003001101. Material: 2024-T351. 24 Total Hole Sizes: 27/32, 55/64, 7/8, 57/64, 29/32, 59/64. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3110D | Custom Multi-Hole Standard made to the Specifications of 99A53003001101. Material: 2024-T351. 20 Total Hole Sizes: 15/16, 61/64, 31/32, 63/64, 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3112 | Custom Bolt hole Standard, Hole Sizes; 1/8", 5/32", 3/16", 1/4", inch diameter Holes. .020" Thru EDM notches .005" Wide(+/- .001"). Material: 2024-T3 Aluminum. Plate Size: 2.0" x 4.0" x 0.250". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3112/2014-T6 | Custom Bolt hole Standard, Hole Sizes; 1/8", 5/32", 3/16", 1/4", inch diameter Holes. .020" Thru EDM notches .005" Wide(+/- .001"). Material: 2014-T6 Aluminum. Plate Size: 2.0" x 5.0" x 0.250". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3112/2024-T6 | Custom Bolt hole Standard, Hole Sizes; 1/8", 5/32", 3/16", 1/4", inch diameter Holes. .020" Thru EDM notches .005" Wide(+/- .001"). Material: 2024-T6 Aluminum. Plate Size: 2.0" x 5.0" x 0.250". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3113 | Custom Bolt hole Standard, Hole Size; 5/8"Ø inch diameter Hole. .020" Thru EDM notch .005" Wide(+/- .001"). Material: 7075-T6 Aluminum. Plate Size: 2.0" x 2.0" x 0.250". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3118TI | 5 STEP WEDGE .100"(2.54mm), .200"(5.08mm),. 300"(7.62mm), .400"(10.16mm), .500"(12.7mm) MATERIAL: 6AL-4V TiTANIUM. PAD SIZE: 1.0" X 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3119AL | Aluminum Dynamic Split Hole Reference Block. Material: 7075-T651 aluminum. 16 Holes with 1/16" Cross Drilled Holes on both sides. Hole Sizes: 4.5mm, 5.0mm, 6.0mm, 6.5mm, 7.0mm, 7.5mm, 8.0mm, 9.0mm, 10mm, 12mm, 14mm, 16mm, 20mm, 22mm, 24mm. Tolerance +/... | 1 | |
| AFNDT-3119TI | Titanium Dynamic Split Hole Reference Block. Material: 6Al-4v Titanium. 16 Holes with 1/16" Cross Drilled Holes on both sides. Hole Sizes: 4.5mm, 5.0mm, 6.0mm, 6.5mm, 7.0mm, 7.5mm, 8.0mm, 9.0mm, 10mm, 12mm, 14mm, 16mm, 20mm, 22mm, 24mm. Tolerance +/- .... | 1 | |
| AFNDT-3123AL | 7 STEP REFERENCE BLOCK ..STEP PAD SIZE: 1.0" X 1.0" MATERIAL: 2024-T3 ALUMINUM. STEP RANGE:.030", .040", .050", .0600", .070", .080", .090" +/- .001". Includes certification report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3124/316L | Custom Ultrasonic Calibration Block. Material: 316L Stainless Steel. Size: 6.0" x 1.5" x 5mm Thick. EDM slot depths 0.118"(0.3mm), .0197"(0.5mm), .0394"(1.0mm), .0787"(2.0mm), .0984"(2.5mm) x .005"W +/-.001"Wide. Includes Test Report and Certificate of Co | 1 | |
| AFNDT-3124/6061 | Custom Ultrasonic Calibration Block. Material: 6061 Al. Size: 6.0" x 1.5" x 5mm Thick. EDM slot depths 0.118"(0.3mm), .0197"(0.5mm), .0394"(1.0mm), .0787"(2.0mm), .0984"(2.5mm) x .005"W +/-.001"Wide. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3125AL | Contains 12 hole sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters.( .030X.030 CORNER NOTCH and 3 SURFACE NOTCHES .010", .020", .040" DEEP x .750" LONG.) MATERIAL: 2024-T3 ALUMINUM. Includes Certification Repo... | 1 | |
| AFNDT-3125CS | Contains 12 hole sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters.( .030X.030 CORNER NOTCH and 3 SURFACE NOTCHES .010", .020", .040" DEEP x .750" LONG.) MATERIAL: 4130 or 4340 CARBON STEEL. Includes Certificat... | 1 | |
| AFNDT-3125SS | Contains 12 hole sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters.( .030" X .030" CORNER NOTCH and 3 SURFACE NOTCHES .010", .020", .040" DEEP x .750" LONG.) MATERIAL: 304 STAINLESS STEEL. Includes Certificatio... | 1 | |
| AFNDT-3126CS | 12 hole sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters, .030" Deep Mid-bore EDM Notches .005"(+/- .001") wide and 3 SURFACE NOTCHES .010", .020", .040" DEEP x .750" LONG.). Material: 4340 Carbon Steel. Incl... | 1 | |
| AFNDT-3129CS | BOEING ALL AIRCRAFT MODELS 51-00-17 PT 6 FIG 3. MULTIHOLE STANDARD WITH 11 HOLES SIZES: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1.00". EDM NOTCHES: .030 x .030 .005" +/-0.002. MATERIAL: 4340 STEEL. Includes Test Report Traceab... | 1 | |
| AFNDT-3130TI | BOEING ALL AIRCRAFT MODELS 51-00-14 PT 6 FIG 3. MULTIHOLE STANDARD WITH 11 HOLES SIZES: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1.00". EDM NOTCHES: .050 x .050(+/-.005") x .005" (+0.00/-.002). MATERIAL: 6AL-4V TITANIUM. Includ... | 1 | |
| AFNDT-3131AL | 5 STEP WEDGE. STEP PAD SIZE: 1.0" X 1.0" MATERIAL: 2024-T3 ALUMINUM. STEP RANGE: .100", .110", .120", .130", .140", +/- .001". Includes certification report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3132AL | 5 STEP WEDGE. STEP PAD SIZE: 1.0" X 1.0" MATERIAL: 2024-T3 ALUMINUM. STEP RANGE: .150", .160", .170", .180", .190", +/- .001". Includes certification report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3133 | CUSTOM 100° COUNTERSINK BOLT HOLE STANDARD MAUNUFACTURED TO BOEING PART NUMBER 194A, 737 PART 6 53-30-00. MATERIAL: 2024-T3 CLAD ALUMINUM. HOLE SIZES: 2 HOLES 8.6mmØ. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3134AL | 8 STEP WEDGE, STEP SIZES OF .110", .120",.130", .140", .150", .160", .170", and .180" +/- .001". PAD SIZE: .75"x.75", MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3135AL | 7 STEP WEDGE, STEP SIZES OF .190", .200", .210", .220", .230", .240", and .250" +/- .001". PAD SIZE: .75"x.75", MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3138MAG | 7 STEP REFERENCE BLOCK. MATERIAL: MAGNESIUM STEP PAD SIZE: .75" X .75". STEP RANGE:.040", .080", .160", .250", .300", .400", .500" +/- .001". Includes certification report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3142AL | CUSTOM 4 STEP REFERENCE BLOCK. MATERIAL: 7075-T6. STEP SIZE .0100",.400",.700", 1.00" +/-.001. PAD SIZE: 1"X4". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3143 | 5 STEP ACRYLIC WEDGE. STEP SIZES: .200", .300",. 400", .500", .600" MATERIAL: CAST ACRYLIC. PAD SIZE: 1.0" x 1.0" TOLEREANCE = +/- .002". Includes Certification and Certificate of Conformance. | 1 | |
| AFNDT-3144AL | 7 STEP WEDGE, STEP SIZES OF .280", .350", .450", .550", .650", .750", and .850" +/- .001". PAD SIZE: .75"x.75", MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3149 | 5 STEP ACRYLIC WEDGE. STEP SIZES: .600", .700",. 800", .900", 1.00" MATERIAL: CAST ACRYLIC. PAD SIZE: 1.0" x 1.0" TOLEREANCE = +/- .002". Includes Certification and Certificate of Conformance. | 1 | |
| AFNDT-3152CS | 5 Step Wedge Manufactured in Accordance with ASTM E797/E797M-15.Step Sizes: .100", .200",. 350", .500", 1.000" MATERIAL: 1018 Carbon Steel. Pad Size: 0.750" X 0.750" TOLEREANCE = +/- .002. NICKEL PLATED CORROSION RESISTANT COATING. Includes measure... | 1 | |
| AFNDT-3152SS | 5 Step Wedge Manufactured in Accordance with ASTM E797/E797M-15.Step Sizes: .100", .200",. 350", .500", 1.000" MATERIAL: 304 Stainless Steel. Pad Size: 0.750" X 0.750" TOLEREANCE = +/- .002. Includes measurement Certification for the .750" Block wi... | 1 | |
| AFNDT-3156 | Tapered Aluminum Standard. Material: 2024-T351 Aluminum. Taper: 0.039"-0.164". Dimensions: 1" x 4" x .25". Slot width = 0.75". Includes Test Report. | 1 | |
| AFNDT-3158 | 3 HOLE REFERENCE STANDARD. MATERIAL: 4130 CRES STEEL. HOLE SIZES: 3/16, 1/4, 5/16 TOTAL OF 3 EDM THROUGH NOTCHES .020 DEEP x .006" WIDE. Includes Certification Report. | 1 | |
| AFNDT-3159AL | 8 HOLE REFERENCE STANDARD, MATERIAL: 2024-T3 ALUMINUM., HOLE SIZES: 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", .020" THROUGH NOTCH .005+/-.001. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3160AL | BOMBARDIER EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), DEPTH TOLERANCE = +/- .001"(+/- .003mm). MATERIAL 2024-T3 ALUMINUM. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and Certificate of... | 1 | |
| AFNDT-3160AL-1 | BOMBARDIER EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), DEPTH TOLERANCE = +/- .001"(+/- .003mm). MATERIAL 6061-T6 ALUMINUM, IACS 40.00-44.80. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and | 1 | |
| AFNDT-3160AL-2 | BOMBARDIER EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), DEPTH TOLERANCE = +/- .001"(+/- .003mm). MATERIAL 2024-T6 ALUMINUM, SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and Certificate of ... | 1 | |
| AFNDT-3160CS | BOMBARDIER EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), DEPTH TOLERANCE = +/- .001"(+/- .003mm). MATERIAL 4130/4340 CRES STEEL. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and Certificat... | 1 | |
| AFNDT-3160SS | BOMBARDIER EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), DEPTH TOLERANCE = +/- .001"(+/- .003mm). MATERIAL: 304 STAINLESS STEEL. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and Certificat... | 1 | |
| AFNDT-3161/321S | 6 STEP REFERENCE BLOCK WITH HOLDER. MATERIAL: 321 CRES STEEL. STEP SIZES: .008",.020",.050", .080", .100" , .125" +/-.005". PAD SIZE = 1.0" x 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3161/INC | 6 STEP REFERENCE BLOCK WITH HOLDER. MATERIAL: INCONEL. STEP SIZES: .008",.020",.050", .080", .100" , .125" +/-.005". PAD SIZE = 1.0" x 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3162CS | 5 STEP WEDGE .200", .300", .400", .500", .600". TOLERANCE +/-.001". ..MATERIAL: 4340 or 4130 CARBON STEEL . PAD SIZE:75"x.75". Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3163CS | 8 STEP WEDGE, STEP SIZES: 0.35mm 1mm, 2mm, 3mm, 4mm, 5mm, 7mm, 9mm +/- .02mm. Material: 1018 Carbon Steel. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3164AL | Custom NDI standard for F-15C/D inspection. Material: 2124-T8 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3165MG | 5 STEP WEDGE .050", .070", .090", .110", .130". TOLERANCE +/-.001". ..MATERIAL: MAGNESIUM. PAD SIZE:75"x.75". Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3169 | 8 Step Wedge, Material: 2219 Aluminium per AMS4144.8 Steps: 0.5mm, 1mm, 2mm, 3mm, 4mm, 5mm, 7mm, 9mm. (Tolerance: ± 0.02mm). Pad Size: 15mm x 15mm (Tolerance: ± 0.5mm).Surface Finish: Ra 0.8 µm (32 µin.)max. Includes Test Report and Certificate of Conf... | 1 | |
| AFNDT-3170AL | Thin Material Step Wedge: 7075-T6 Aluminium, 5 Steps total (0.5mm, 1.00mm, 1.5mm, 2.00mm and 2.5mm). Step pad size: 19mm x 19mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3170CS | THIN MATERIAL 5 STEP WEDGE 1018 STEEL | 1 | |
| AFNDT-3171AL-1 | 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .055", .063", .071", .080", .090", .100", .110", .115", .120" .125" +/-.001" Pad Size: .75" x 75" . Material: 2024-T3 Aluminum. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3172AL-1 | 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .012", .016", .020", .025", .032", .036", .040", .045", .050" .055" +/-.001" Pad Size: .75" x 75" . Material: 2024-T3 Aluminum. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3172AL-2 | 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .012", .016", .020", .025", .032", .036", .040", .045", .050" .055" +/-.001" Pad Size: .75" x 75" . Material: 7075-T6 Aluminum. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3172CS | 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .012", .016", .020", .025", .032", .036", .040", .045", .050" .055" +/-.001" Pad Size: .75" x 75" . Material: 4130 Carbon Steel. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3173AL-1 | 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .055", .063", .071", .080", .090", .100", .110", .115", .120" .125" +/-.001" Pad Size: .75" x 75" . Material: 2024-T3 Aluminum. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3173AL-2 | 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .055", .063", .071", .080", .090", .100", .110", .115", .120" .125" +/-.001" Pad Size: .75" x 75" . Material: 7075-T6 Aluminum. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3173CS | 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .055", .063", .071", .080", .090", .100", .110", .115", .120" .125" +/-.001" Pad Size: .75" x 75" . Material: 4130 Carbon Steel. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3174AL-1 | 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .125", .135", .145", .150", .160", .170", .180", .190", .200" .225" +/-.001" Pad Size: .75" x 75" . Material: 2024-T3 Aluminum. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3174AL-2 | 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .125", .135", .145", .150", .160", .170", .180", .190", .200" .225" +/-.001" Pad Size: .75" x 75" . Material: 7075-T6 Aluminum. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3174CS | 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .125", .135", .145", .150", .160", .170", .180", .190", .200" .225" +/-.001" Pad Size: .75" x 75" . Material: 4340M Carbon Steel. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3175AL | 8 Step Calibration Block, Material 7075-T6 Aluminum. Steps: 0.5mm, 1mm, 2mm, 3mm, 4mm, 5mm, 7mm, 9mm. (Tolerance: +/-0.02mm)...- Pad Size: 19mm x 19mm (Tolerance: +/- 0.5mm)...- Surface Finish: Ra 0.8 µm (32 µin) max...- Includes Certification Report a... | 1 | |
| AFNDT-3175CS | 8 Step Calibration Block, Material 1018 Steel. Steps: 0.5mm, 1mm, 2mm, 3mm, 4mm, 5mm, 7mm, 9mm. (Tolerance: +/-0.02mm)...- Pad Size: 19mm x 19mm (Tolerance: +/- 0.5mm)...- Surface Finish: Ra 0.8 µm (32 µin) max...- Includes Certification Report and Cer... | 1 | |
| AFNDT-3175TI | 8 Step Calibration Block, Material 6AL-4V Titanium. Steps: 0.5mm, 1mm, 2mm, 3mm, 4mm, 5mm, 7mm, 9mm. (Tolerance: +/-0.02mm)...- Pad Size: 19mm x 19mm (Tolerance: +/- 0.5mm)...- Surface Finish: Ra 0.8 µm (32 µin) max...- Includes Certification Report an... | 1 | |
| AFNDT-3176AL-1 | 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .250", .300", .350", .400", .500", .600", .700", .800", .900" 1.000" +/-.001" Pad Size: .75" x 75" . Material: 2024-T3 Aluminum. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3176AL-2 | 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .250", .300", .350", .400", .500", .600", .700", .800", .900" 1.000" +/-.001" Pad Size: .75" x 75" . Material: 7075-T6 Aluminum. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3177AL | BOMBARDIER 10 STEP ALUMINUM WEDGE, PT 4 FIG. 2 PAGE 8. STEP THICKNESSES:, .024", .028", .031", .035", .039", .044", .048", .052", .056" .059" X.XXX +/-0.002, X.XX +/-0.010". PAD SIZE: 1.0" x 1.0", Material: 2024-T3 Aluminum. Chromic anodize and 1 coat | 1 | |
| AFNDT-3178AL | Contains 12 hole sizes: 3mm, 5mm, 7mm, 9mm, 11mm, 13mm, 14mm,15mm, 16mm 17mm,18mm and 19mm diameters. (1mm x 1mm x 0.15mm ± 0.03mm) Corner EDM Notches. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3178AL-1 | Contains 12 hole sizes: 3mm, 5mm, 7mm, 9mm, 11mm, 13mm, 14mm,15mm, 16mm 17mm,18mm and 19mm diameters. (1mm x 1mm x 0.15mm ± 0.03mm) Corner EDM Notches. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3179AL | 100° Countersink Multi Hole Standard. Contains 12 hole sizes: 3mm, 5mm, 7mm, 9mm, 11mm, 13mm, 14mm,15mm, 16mm 17mm,18mm and 19mm diameters. (1mm x 1mm x 0.15mm ± 0.03mm) Corner EDM Notches. Material: 2024-T3 Aluminum. Includes Test Report and Certificat | 1 | |
| AFNDT-3180 | 6 FLAT BOTTOM HOLE REFERENCE STANDARD. MATERIAL: 7075-T6 ALUMINUM. Hole Sizes: 5/16", 3/8", 7/16", 1/2", 9/16", 5/8" .060" LONG X. 020" x DEEP x .005" WIDE +/- .001" WIDE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3181AL | 8 Step Calibration Block, Material 2024-T3 Aluminum. Step Sizes: 0.5mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 5.0mm, 7.5mm, 10mm. (Tolerance: +/-0.02mm).- Pad Size: 20mm x 20mm (Tolerance: +/- 0.5mm). Includes Certification Report and Certificate of Conformance. | 1 | |
| AFNDT-3182AL | 5 STEP WEDGE. STEP SIZES: .040", .100", .150", .250", .350". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM . PAD SIZE: .75" x .75" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3187AL | METRIC 10 STEP CALIBRATION BLOCK, 0.6mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm ± .05mm. Pad Size: 20mm X 20mm. Per Airbus Procedure A 51-10-04. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3187TI | METRIC 10 STEP CALIBRATION BLOCK, 0.6mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm ± .05mm. Pad Size: 20mm X 20mm. Material: 6AL-4V Titanium. Per Airbus Procedure A 51-10-04. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3190AL | 7 STEP WEDGE. STEP SIZES: .030", .115", .200", .285", .370", .455", and .540" +/- .001". PAD SIZE: .75"x.75", MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3191AL | 7 STEP WEDGE. STEP SIZES: .030", .115", .200", .285", .370", .455", and .540" +/- .001". PAD SIZE: .75"x.75", MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3196AL | CUSTOM 4 STEP WEDGE. MATERIAL: 7075-T6 ALUMINUM. STEP SIZES: .250",.500",.750", 1.000" +/-.001. PAD SIZE: .75" x .75". Includes Test Report Traceable to NIST. | 1 | |
| AFNDT-3199AL | 7 STEP REFERENCE BLOCK. STEP SIZES: .025",.040", .063", .071", .100",.125",.200" +/-.001". MATERIAL: 2024-T6 ALUMINUM. PAD SIZE: .75"x.75" .Includes Test Report and Certificate of Conformance | 1 | |
| AFNDT-3200/321 | 7 STEP CALIBRATION BLOCK. STEP SIZES: .020", .040", .060", .080", .100", .150", and .200" +/- .010". PAD SIZE: 1.0" x 1.0", MATERIAL: 321 CRES. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3201CS | 4 STEP CALIBRATION BLOCK. STEP SIZES: .250", .500", .750", 1.00" ±.002, 3/4" X 3/4" PAD SIZE. MATERIAL: 1018 CARBON STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3207CS | 5 Step Block. Material: 1018 Steel. Steps: 0.45mm, 0.50mm, 1.0mm, 2.5mm, 5.0mm. Tolerance: ± 0.02mm. Pad Size: 15.0mm x 15.0mm. Tolerance: ± 0.5mm. Surface Finish: Ra 0.8 µm (32 µin.) max. Supplied with Delrin Holding Block. Includes Test Report and Certi | 1 | |
| AFNDT-3210 | SURFACE REFERENCE STANDARD, ONE EDM NOTCH .030" Deep x .040" wide x .060 long ( +/- .002), MATERIAL: 2024-T3 ALUMINUM. SIZE: 2.0"L x 2.0"W x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3211 | ALUMINUM TO ALUMINUM BONDED STANDARD. MATERIAL: 2024-T3 ALUMINUM, .063"/.040" WITH A 1.0" DISBOND. SIZE: 4.0" X 4.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3214/7075-T6 | 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .100", .200", .300", .400", .500", .600", .700", .800", .900" 1.000" +/-.001" Pad Size: .75" x 75" . Material: 7075-T6 Aluminum. Includes Certification Report traceable to NIST. Supply with MILL certificate. | 1 | |
| AFNDT-3214AL | 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .100", .200", .300", .400", .500", .600", .700", .800", .900" 1.000" +/-.001" Pad Size: .75" x 75" . Material: 2024-T3 Aluminum. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3214AL-1 | 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .100", .200", .300", .400", .500", .600", .700", .800", .900" 1.000" +/-.001" Pad Size: .75" x 75" . Material: AMS 4144, 2219-T8 Aluminum. Includes Certification Report traceable to NIST. Supply with MILL cert | 1 | |
| AFNDT-3214CS | 10 STEP CARBON STEEL WEDGE. STEP THICKNESS OF , .100", .200", .300", .400", .500", .600", .700", .800", .900" 1.000" +/-.001" Pad Size: .75" x 75" . Material: 1018 OR 4340 Carbon Steel. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3214SS | 10 STEP STAINLESS STEEL WEDGE. STEP THICKNESS OF , .100", .200", .300", .400", .500", .600", .700", .800", .900" 1.000" +/-.001" Pad Size: .75" x 75" . Material: 304 Stainless Steel. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3214TI | 10 STEP TITANIUM WEDGE. STEP THICKNESS OF , .100", .200", .300", .400", .500", .600", .700", .800", .900" 1.000" +/-.001" Pad Size: .75" x 75" . Material: 6AL-4V Titanium. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3215AL | BOEING REFERENCE STANDARD. PT 6 51-0-00. 13 HOLE REFERENCE STANDARD. MATERIAL: 2024-T3 ALUMINUM. HOLE SIZES: 5/32", 3/16", 1/4", 7/32", 9/32" 5/16" , 11/32", 3/8" ,7/16", 1/2", 9/16", 5/8", 3/4". EACH HOLE CONTAINS A CORNER EDM NOTCH: 0.030" x 0.030" a... | 1 | |
| AFNDT-3216/TI | 4 STEP WEDGE .125", .250", .500", .750". TOLERANCE +/-.001". MATERIAL: 6AL-4V TITANIUM. PAD SIZE: 750" x .750" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3217AL | BOEING REFERENCE STANDARD. PT 6 51-0-00. 29 HOLE REFERENCE STANDARD. MATERIAL: 2024-T3 ALUMINUM. HOLE SIZES: 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", ... | 1 | |
| AFNDT-3224TI | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .005", .010", .020", .040", .060" (.005"W +/- .002, MAX .007"). MATERIAL: 6AL-4v TITANIUM@2.2IACS. SIZE: 1.0"W x 6.0"L x .500". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3226AL | Custom Metric 6 Step Block. Step Thicknesses of 2mm, 4mm, 6mm, 8mm, 10mm, 12.5mm. (Tolerance: +/- 0.02mm). Pad Size: 20mm x 20mm. Material: 7075-T6 ALUMINUM. Includes Certification Report for step thickness and Certificate of Conformance. | 1 | |
| AFNDT-3227/7175 | Custom Metric 7 Step Block. Step Thicknesses of 12.5mm, 14mm, 16mm, 18mm, 20mm, 22.mm, 25mm. (Tolerance: +/- 0.02mm). Pad Size: 19mm x 19mm. Material: 7175-T73 ALUMINUM. Includes Certification Report for step thickness and Certificate of Conformance. | 1 | |
| AFNDT-3227AL | Custom Metric 7 Step Block. Step Thicknesses of 12.5mm, 14mm, 16mm, 18mm, 20mm, 22.mm, 25mm. (Tolerance: +/- 0.02mm). Pad Size: 19mm x 19mm. Material: 7075-T6 ALUMINUM. Includes Certification Report for step thickness and Certificate of Conformance. | 1 | |
| AFNDT-3228AL-1 | 8 STEP WEDGE, 0.5mm, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, +/- .05mm. Material: 2024-T3 Aluminum. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3228AL-2 | 8 STEP WEDGE, 0.5mm, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3229AL | BOEING REFERENCE STANDARD. PT 6 51-0-00. 13 HOLE REFERENCE STANDARD. MATERIAL: 2024-T3 ALUMINUM. HOLE SIZES: 3/16", 1/4", 7/32", 9/32" 5/16" , 11/32", 3/8" ,7/16", 1/2", 9/16", 5/8", 3/4". EACH HOLE CONTAINS A CORNER EDM NOTCH: 0.030" x 0.030" and 0.02... | 1 | |
| AFNDT-3231 | Custom McDonnell Douglas Low Frequency Eddy Current reference standard, 06-20-01 Figure 9 sheets 1-4. Material: 2024-T3 or 7075-T6 Aluminum. Fasteners: (NAS1097AD6-5 & BACB30NW6K3). Includes Test Report and Certificate of Confromance. | 1 | |
| AFNDT-3231-1 | Custom McDonnell Douglas Low Frequency Eddy Current reference standard, 06-20-01 Figure 9 sheets 1-4. Material: 2024-T3 or 7075-T6 Aluminum.Fasteners: (CR3223-5 & MS21141-5). Includes Test Report and Certificate of Confromance. | 1 | |
| AFNDT-3232F | Custom Hole Standard 2.0" x 2.0" x .25" Square. Material: Forged Aluminum. Hole Size: 16.5mm. EDM Corner Notch: .05mm x .05mm x .1mm Wide +/- 0.05mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3233F | Custom Eddy Current Surface Standard. Size: 80mm x 35mm x 7mm. Material: Forged Aluminum. EDM Notch: .060" Long x .004" Wide x .030" Deep +/- 0.002". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3238AL | Contains 13 hole sizes; 1/8, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. EDM: ( .030 X .030 X .005 +/- .002) CORNER NOTCH and ( .020 X .005 +/- .002) THRU NOTCH. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report a | 1 | |
| AFNDT-3240AL | Aluminum multi-hole reference standard. Contains 5 hole sizes; 1/8, 5/32, 3/16, 7/32 and 1/4" inch hole diameters.( .030" x.030" corner EDM notch in each hole). Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3243AL | 8 STEP WEDGE, 2mm, 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm +/- .05mm. Material: 2024-T3 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3244AL | 8 STEP WEDGE, 2mm, 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3245AL | 8 STEP WEDGE, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm +/- .05mm. Material: 2024-T3 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3246AL | 8 STEP WEDGE, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3247AL-1 | 8 STEP WEDGE, 1mm (.0394), 3mm (.1181), 5mm (.1968), 8mm (.3149), 10mm (.3937), 15mm (.5905), 20mm (.7874), 25mm (.9842) +/- .01mm. Material: 7075-T6 Aluminum. Material Thickness: .984, Steps: .984x.984, Length: 7.874 Includes Test Report Traceable to | 1 | |
| AFNDT-3248AL | Custom Metric 6 Step Block. Step Thicknesses of 0.4mm, 0.7mm, 1.0mm, 1.3mm, 1.6mm, 2.0mm. (Tolerance: +/- 0.05mm). Pad Size: 15mm X 15mm, (Tolerance: +/- 0.5mm) Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3252AL | 9 STEP THICKNESS STANDARD. STEP SIZES: .015", .025", .035", .045", .055", .065", .075", .085", .095" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075-T6 ALUMINUM.Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certifica | 1 | |
| AFNDT-3252CS | 9 STEP THICKNESS STANDARD. STEP SIZES: .015", .025", .035", .045", .055", .065", .075", .085", .095" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 4340 or 4130 Carbon Steel.Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and | 1 | |
| AFNDT-3252TI | 9 STEP THICKNESS STANDARD. STEP SIZES: .015", .025", .035", .045", .055", .065", .075", .085", .095" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 6AL-4V TITANIUM. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certifica | 1 | |
| AFNDT-3253AL | 9 STEP WEDGE, 0.38mm, 0.64mm, 0.89mm, 1.14mm, 1.40mm, 1.65mm, 1.91mm, 2.16mm, 2.41mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Confo | 1 | |
| AFNDT-3253CS | 9 STEP WEDGE, 0.38mm, 0.64mm, 0.89mm, 1.14mm, 1.40mm, 1.65mm, 1.91mm, 2.16mm, 2.41mm +/- .05mm. Material: 4340 or 4130 Carbon Steel. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate | 1 | |
| AFNDT-3253TI | 9 STEP WEDGE, 0.38mm, 0.64mm, 0.89mm, 1.14mm, 1.40mm, 1.65mm, 1.91mm, 2.16mm, 2.41mm +/- .05mm. Material: 6Al-4v Titanium. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Confor | 1 | |
| AFNDT-3256/2024-T3 | 8 STEP WEDGE, 0.51mm (.020"), 0.64mm (.025"), 0.76mm (..030"), 0.91mm (.036"), 1.02mm (.040"), 1.14mm (.045"), 1.27mm (.050"), 1.42mm (.056") +/- .01mm. Material: 2024-T3 Aluminum. Step Pad Size: .25mm x .25mm, Overall Length: 7.874 Includes Test Repor | 1 | |
| AFNDT-3256/7075-T6 | 8 STEP WEDGE, 0.51mm (.020"), 0.64mm (.025"), 0.76mm (..030"), 0.91mm (.036"), 1.02mm (.040"), 1.14mm (.045"), 1.27mm (.050"), 1.42mm (.056") +/- .01mm. Material: 7075-T6 Aluminum. Step Pad Size: .25mm x .25mm, Overall Length: 7.874 Includes Test Repor | 1 | |
| AFNDT-3257/2024-T3 | 8 STEP WEDGE, 1.60mm (.063"), 1.80mm (.071"), 2.03mm (..080"), 2.31mm (.091"), 2.54mm (.100"), 3.0mm (.118"), 3.18mm (.125"), 3.56mm (.140") +/- .01mm. Material: 2024-T3 Aluminum. Step Pad Size: .25mm x .25mm, Overall Length: 7.874 Includes Test Report | 1 | |
| AFNDT-3257/7075-T6 | 8 STEP WEDGE, 1.60mm (.063"), 1.80mm (.071"), 2.03mm (..080"), 2.31mm (.091"), 2.54mm (.100"), 3.0mm (.118"), 3.18mm (.125"), 3.56mm (.140") +/- .01mm. Material: 7075-T6 Aluminum. Step Pad Size: .25mm x .25mm, Overall Length: 7.874 Includes Test Report | 1 | |
| AFNDT-3260AL | Olympus Style Aluminum multi-hole reference standard. Contains 5 hole sizes; 2.0mm, 2.5mm, 3.0mm, 3.5 and 4.0mm hole diameters. EDM notch 0.5mm deep in each hole, length is half of the material thickness. Material: 7075-T76 Aluminum 15mm Thick. Includes T | 1 | |
| AFNDT-3264 | Custom Reference Standard for the Boeing Lead Screw inspection, equivalent to 7903385. Material: 4150 Alloy Steel, 1.5 Outside Diameter and 1.069" Inside Diameter with 3 EDM Flaws per BSS 7048 page 2 Table 1. Includes Test Report and Certificate of Confor | 1 | |
| AFNDT-3265I | 6 Step Wedge .015", .020", .025", .030" ,0.035", 0.040" +/-.001", . Pad Size: 1.0" x 1.0". Material: 625 Inconel. Includes Certification. | 1 | |
| AFNDT-3266I | 6 Step Wedge .050", .100", .200", .300" ,.400", .500" +/-.001", . Pad Size: 1.0" x 1.0". Material: 625 Inconel. Includes Certification. | 1 | |
| AFNDT-3269AL | Custom Multi-Hole Standard manufactured to the Specifications of Airbus part number 99A53003001101. Material: 2024-T351. 8 Total Hole Sizes: 6.0mm, 7.0mm, 8.0mm, 9.0mm, 10.0mm, 11.0mm, 12.0mm, 13mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3275 | Custom Metric 7 Step Block Per ASTM E797/E797M-15. Step Thicknesses of .50mm, 1.00mm, 2.00mm, 4.00mm, 6.00mm, 8.00mm, 10.00mm. (Tolerance: +/- 0.02mm). Pad Size: 20mm x 20mm. Material: 7075-T6 ALUMINUM. Includes Certification Report for step thickness | 1 | |
| AFNDT-3276 | Custom Metric 7 Step Block Per ASTM E797/E797M-15. Step Thicknesses of .50mm, 1.00mm, 2.00mm, 4.00mm, 6.00mm, 8.00mm, 10.00mm. (Tolerance: +/- 0.02mm). Pad Size: 20mm x 20mm. Material: 2024-T3 ALUMINUM. Includes Certification Report for step thickness, | 1 | |
| AFNDT-3281 | 5 STEP WEDGE .100", .200",. 300", .400", .500" +/- .001. MATERIAL: 2219-T851 ALUMINUM. PAD SIZE: .75" L +/- .002 x .75" W +/- .005 TOLEREANCE. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3282 | Custom Metric 7 Step Block Per ASTM E797/E797M-15. Step Thicknesses of .50mm, 1.00mm, 2.00mm, 4.00mm, 6.00mm, 8.00mm, 10.00mm. (Thickness Tolerance: +/- 0.02mm). Pad Size: 20mm x 20mm.Width Tolerance ±1.0mm and Length Tolerance ± 0.5mm. Material: 15-5P | 1 | |
| AFNDT-3285/17-4 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .005"(0.127mm), .010"(0.254mm), .020"(0.508mm) (.004"W +/- .002). Material: 17-4PH Steel Condition to TH1050. SIZE: 1.0"W x 3.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3285/17-7 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .005"(0.127mm), .010"(0.254mm), .020"(0.508mm) (.004"W +/- .002). Material: 17-7PH Steel Condition to TH1050. SIZE: 1.0"W x 3.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3285/304 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .005"(0.127mm), .010"(0.254mm), .020"(0.508mm) (.004"W +/- .002). Material: Non-Magnetic 304 Stainless Steel. SIZE: 1.0"W x 3.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3287AL | Custom multi-hole 100° countersink reference standard Material: 7075-T6 Aluminum. Hole sizes: 5/32", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2". Countersink holes opposite side. Thru hole EDM notches in each hole, .020" Deep x .005" Wide +/-.001". Includes T | 1 | |
| AFNDT-3288AL | 5 STEP WEDGE .100", .200",. 300", .400", .500" MATERIAL: ASTM E 797 7075 ALUMINUM. PAD SIZE: .75" X .75" TOLEREANCE = +/- .001. Clear Anodized for corrosion protection. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3289AL | Custom Metric 6 Step Block. Step Thicknesses of 1.0mm, 1.2mm, 1.4mm, and1.6mm. (Tolerance: +/- 0.02mm). Pad Size: 15mm X 15mm, (Tolerance: +/- 0.5mm) Material: 7075-T6 Aluminum with Delrin Holding Block. Includes Certification Report and Certificate | 1 | |
| AFNDT-3290AL | Custom ST Aerospace Engineering Multi-Hole Standard 2 Plate Assembly, Manufactured to the Customer Supplied Drawing Specifications . Material: 7075-T6 Aluminum. 6 Total Hole Sizes to be determined. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3291AL | BOMBARDIER 15 HOLE METRIC REFERENCE STANDARD. CL-215T PART 6 PAGE 8 FIGURE 5 GENERAL. MATERIAL: 7075-T6 ALUMINUM. HOLE SIZES: 4MM, 5MM, 6MM, 7MM, 8MM, 9MM, 10MM, 11MM, 12MM, 13MM, 14MM, 15MM, 16MM, 17MM, 18MM diameters. Includes 15 Thru EDM Notches 0.040 | 1 | |
| AFNDT-3291CS | BOMBARDIER 15 HOLE METRIC REFERENCE STANDARD. CL-215T PART 6 PAGE 8 FIGURE 5 GENERAL. MATERIAL: 4340 CARBON STEEL. HOLE SIZES: 4MM, 5MM, 6MM, 7MM, 8MM, 9MM, 10MM, 11MM, 12MM, 13MM, 14MM, 15MM, 16MM, 17MM, 18MM diameters. Includes 15 Thru EDM Notches 0.040 | 1 | |
| AFNDT-3293/400 | 6 STEP WEDGE, .025", .050",. 100", .150", .200", 300" MATERIAL: MONEL 400. PAD SIZE: 1.50" X 1.50" TOLEREANCE = +/- .001. Includes Delrin Holding Block and Certification Report. | 1 | |
| AFNDT-3293/625I | 6 STEP WEDGE, .025", .050",. 100", .150", .200", 300" MATERIAL: 625 inconel. PAD SIZE: 1.50" X 1.50" TOLEREANCE = +/- .001. Includes Delrin Holding Block and Certification Report. | 1 | |
| AFNDT-3293/718I | 6 STEP WEDGE, .025", .050",. 100", .150", .200", 300" MATERIAL: 718 inconel. PAD SIZE: 1.50" X 1.50" TOLEREANCE = +/- .001. Includes Delrin Holding Block and Certification Report. | 1 | |
| AFNDT-3294/718I | 6 STEP WEDGE, .050", .100", .150", .200", .250", 300" MATERIAL: 718 inconel. PAD SIZE: 1.50" X 1.50" TOLEREANCE = +/- .001. Includes Delrin Holding Block and Certification Report. | 1 | |
| AFNDT-3296/316L | 12 Hole Calibration Standard, Hole Sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters, .020 x .005" ± .002" Thru EDM Notches in each Hole. Material: 316L Stainless Steel. Includes Test Report and Certificate of Co | 1 | |
| AFNDT-3297CS | Custom Metric 7 Step Block. Step Thicknesses of 2.5mm, 5.00mm, 5.05mm, 7.5mm, 7.55mm, 10.00mm, 10.05mm. (Thickness Tolerance: +/- 0.02mm). Pad Size: 20mm x 20mm, (Tolerance: ± 0.5mm) Material: 1018 Steel. Includes Certification Report for step thickness | 1 | |
| AFNDT-3298CS | 10 STEP CARBON STEEL WEDGE. STEP THICKNESS OF: 100", .310", 520", 730", .940", 1.150", 1.360", 1.570", 1.780" 2.00" +/-.001". Pad Size: 1.00" x 1.00" . Material: 1018 Carbon Steel. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3299/4340 | 12 HOLE REFERENCE STANDARD . HOLE SIZES: 1/8", 5/32", 3/16", 7/32" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8", 3/4" .020" x .005" +/- .002" WIDE MID-WALL EDM NOTCH. Material: 4340 Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3299/6AL-4V | 12 HOLE REFERENCE STANDARD . HOLE SIZES: 1/8", 5/32", 3/16", 7/32" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8", 3/4" .020" x .005" +/- .002" WIDE MID-WALL EDM NOTCH. Material: 6AL-4v Titanium. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3299/7075-T6 | 12 HOLE REFERENCE STANDARD . HOLE SIZES: 1/8", 5/32", 3/16", 7/32" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8", 3/4" .020" x .005" +/- .002" WIDE MID-WALL EDM NOTCH. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3301/2024-T3 | 8 STEP WEDGE, Step Sizes: 0.6mm,1.2mm,1.4mm,1.6mm,1.8mm, 2.0mm,2.2mm,2.4mm; MATERIAL: 2024-T3 ALUMINUM. LENGTH: 20mm Wide x 28mm Long for the first and last step. 20mm x 20mm long for the 6 inside steps. Total Length=176mm Long. TOLERANCE = +/- 0.05mm. Su | 1 | |
| AFNDT-3301/7075-T6 | 8 STEP WEDGE, Step Sizes: 0.6mm,1.2mm,1.4mm,1.6mm,1.8mm, 2.0mm,2.2mm,2.4mm; MATERIAL: 7075-T6 ALUMINUM. LENGTH: 20mm Wide x 28mm Long for the first and last step. 20mm x 20mm long for the 6 inside steps. Total Length=176mm Long. TOLERANCE = +/- 0.05mm. Su | 1 | |
| AFNDT-3302//7075-T6 | 8 STEP WEDGE:3.0mm,3.5mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm,6.0mm,7.0mm; MATERIAL: 7075-T6 ALUMINUM. LENGTH: 20mm x 160mm. TOLERANCE = +/- 0.05mm. Supplied with Holder. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3302/2024-T3 | 8 STEP WEDGE:3.0mm,3.5mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm,6.0mm,7.0mm; MATERIAL: 2024-T3 ALUMINUM. LENGTH: 20mm x 160mm. TOLERANCE = +/- 0.05mm. Supplied with Holder. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3305AL | Custom 2 Hole Standard. Material: 7075-T6 Aluminum, Block Size: ..250" x 2.0" x 4.0" . HOLE SIZES:.098" and .188" Diameter with Type A% EDM Notch: .035" x .035" x .004" W ±.001". Includes Test Report and Certificate of Conformance Traceable to NIST. | 1 | |
| AFNDT-3306/2024T3 | EDDY CURRENT SURFACE REFERENCE STANDARD, METRIC NOTCHE SIZES: 0.2mm, 0.5mm &1.0mm. WIDTH = .005" +/- .002" MATERIAL: 2024-T3 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3306/7075T6 | EDDY CURRENT SURFACE REFERENCE STANDARD, METRIC NOTCHE SIZES: 0.2mm, 0.5mm &1.0mm. WIDTH = .005" +/- .002" MATERIAL: 7075-T6 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3306/MAG | EDDY CURRENT METRIC SURFACE REFERENCE STANDARD. EDM NOTCH SIZES: 0.2mm, 0.5mm &1.0mm. WIDTH = .005" +/- .002" MATERIAL: MAGNESIUM ZK60A-T5 PER ASTM-B107. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3307 | Custom 8 Hole Standard Manufactured to the Specifications of ATR Part Number 98S51605001-218, Part 6 51-60-00 Figure 616 Sheet 1. Material: 2024-T3 Aluminum, Block Size: .390" x 4.4" x 4.4"(10mm x 111.8mm x 111.8mm) . HOLE SIZES: 2.5mm and 3.2mm. Include | 1 | |
| AFNDT-3308AL | Eddy Current Calibration Standard 3/8” diameter hole standard. Material: 2024-T3 standard with a .030”x .030" corner notch. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3313TI | 5 STEP WEDGE, 1mm, 1.5mm, 2mm, 3mm, 4mm, +/- .05mm. Material: 6AL-4V Titanium. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3315AL | EDDY CURRENT SURFACE REFERENCE STANDARD, 4 EDM NOTCHES .005", .010", .020" and .050" x (.004"W +/- .002). MATERIAL: 7075-T6 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3317/7075 | 6 STEP WEDGE, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm +/- .05mm. Material: 7075 Aluminum. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3318/7075-T6 | 5 STEP WEDGE .500", .600",. 700", .800", 1.00" MATERIAL: 7075-T6 ALUMINUM. PAD SIZE: .75" X .75" TOLERANCE = +/- .001. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3331AL | 5 STEP WEDGE .750", 1.000", 1.250", 1.500", 2.000". TOLERANCE +/-.001". MATERIAL: 2219-T8 ALUMINUM, CLEAR ANODIZED. PAD SIZE: 750" x .750" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3335/1018 | Custom Metric 7 StepThickness Measurement Calibration Block Per ASTM E797 / E797M-15. Material: 1018 Carbon Steel . Step Thicknesses of: 1, 3, 5, 10, 15, 20 & 25mm. Pad Size: 20mm ±1mm x 20mm ±0.5mm. Includes Certification Report for step thickness and Ce | 1 | |
| AFNDT-3335/2024-T3 | Custom Metric 7 Step Thickness Measurement Calibration Block Per ASTM E797 / E797M-15. Material: Aluminum 2024-T351. Step Thicknesses of: 1, 3, 5, 10, 15, 20 & 25mm. Pad Size: 20mm ±1mm x 20mm ±0.5mm. Includes Certification Report for step thickness and C | 1 | |
| AFNDT-3335/4340 | Custom Metric 7 StepThickness Measurement Calibration Block Per ASTM E797 / E797M-15. Material: 4340 Carbon Steel . Step Thicknesses of: 1, 3, 5, 10, 15, 20 & 25mm. Pad Size: 20mm ±1mm x 20mm ±0.5mm. Includes Certification Report for step thickness and Ce | 1 | |
| AFNDT-3335/7075-T6 | Custom Metric 7 Step Thickness Measurement Calibration Block Per ASTM E797 / E797M-15. Material: Aluminum 7075-T6. Step Thicknesses of: 1, 3, 5, 10, 15, 20 & 25mm. Pad Size: 20mm ±1mm x 20mm ±0.5mm. Includes Certification Report for step thickness and Cer | 1 | |
| AFNDT-3335/TI6AL-4V | Custom Metric 7 StepThickness Measurement Calibration Block Per ASTM E797 / E797M-15. Material: 6AL-4V Titanium . Step Thicknesses of: 1, 3, 5, 10, 15, 20 & 25mm. Pad Size: 20mm ±1mm x 20mm ±0.5mm. Includes Certification Report for step thickness and Cert | 1 | |
| AFNDT-3337AL | 5 STEP WEDGE .020", .030", .040", .050", .060". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3339MAG | 4 Step Calibration Block, .25", .500", .750", 1.00". Pad Size: .750" x .750". MATERIAL: AZ21 Magnesium. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3340CS | CUSTOM 4 STEP CALIBRATION BLOCK. MATERIAL: 4340 CARBON STEEL. STEP SIZES: .040",.090",.180", .250". PAD SIZE: .750" x .750", Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3340SS | CUSTOM 4 STEP CALIBRATION BLOCK. MATERIAL: 304 STAINLESS STEEL. STEP SIZES: .040",.090",.180", .250". PAD SIZE: .750" x .750", Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3341AL | 9 STEP REFERENCE BLOCK WITH ACETAL(DELRIN) HOLDING BLOCK. MATERIAL: 7075-T6 ALUMINUM. STEP SIZES: .030",.050",.080", .120", .160" , .200", .300", .400", .500" +/-.001". PAD SIZE = .75" x .75". Supplied with Delrin(Acetal) Holding Block. Includes Test Repo | 1 | |
| AFNDT-3341CS | 9 STEP REFERENCE BLOCK WITH ACETAL(DELRIN) HOLDING BLOCK. MATERIAL: 4340 STEEL. STEP SIZES: .030",.050",.080", .120", .160" , .200", .300", .400", .500" +/-.001". PAD SIZE = 1.0" x 1.0". Supplied with Delrin(Acetal) Holding Block. Includes Test Report and | 1 | |
| AFNDT-3341INC | 9 STEP REFERENCE BLOCK WITH ACETAL(DELRIN) HOLDING BLOCK. MATERIAL: 718 INCONEL. STEP SIZES: .030",.050",.080", .120", .160" , .200", .300", .400", .500" +/-.001". PAD SIZE = .75" x .75". Supplied with Delrin(Acetal) Holding Block. Includes Test Report an | 1 | |
| AFNDT-3341SS | 9 STEP REFERENCE BLOCK WITH ACETAL(DELRIN) HOLDING BLOCK. MATERIAL: 304 STAINLESS STEEL. STEP SIZES: .030",.050",.080", .120", .160" , .200", .300", .400", .500" +/-.001". PAD SIZE = 1.0" x 1.0". Supplied with Delrin(Acetal) Holding Block. Includes Test R | 1 | |
| AFNDT-3341TI | 9 STEP REFERENCE BLOCK WITH ACETAL(DELRIN) HOLDING BLOCK. MATERIAL: 6AL-4V TITANIUM. STEP SIZES: .030",.050",.080", .120", .160" , .200", .300", .400", .500" +/-.001". PAD SIZE = .75" x .75". Supplied with Delrin(Acetal) Holding Block. Includes Test Repor | 1 | |
| AFNDT-3342AL | 6 STEP WEDGE, STEP SIZES: .500", 1.000", 1.500", 2.000", 2.500", 3.000. TOLERANCE +/-.001". MATERIAL: 2024-T3 ALUMINUM. PAD SIZE: 750" x .750" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3344/2024T3 | 5 STEP WEDGE .100", .200",. 300", .400", .500" MATERIAL: 2024-T3 ALUMINUM. PAD SIZE: 1.00" X 1.00" TOLERANCE = +/- .001. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3344/7075T6 | 5 STEP WEDGE .100", .200",. 300", .400", .500" MATERIAL: 7075-T6 ALUMINUM. PAD SIZE: 1.00" X 1.00" TOLERANCE = +/- .001. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3345AL | 5 STEP THICKNESS STANDARD. STEP SIZES: .020", .050", .100", .150", .200", +/-.002". MATERIAL: 2024-T3 ALUMINUM. SUPPLIED WITH DELRIN HOLDING BLOCK. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3347CS | EDDY CURRENT WELD SURFACE REFERENCE STANDARD. EDM NOTCHES: 0.5mm, 1.0mm, 2.0mm (.1mm (.004") WIDE ± .05mm( .002") MAX WIDTH .152mm (.006"). MATERIAL: 4340 CARBON STEEL. SIZE: 1.0"W x 4.0"L Includeds 4 piece .020" thick shim and Key Ring set. Includes Tes | 1 | |
| AFNDT-3348/2024T3 | 7 STEP METRIC WEDGE: Step Sizes: 1mm, 3mm, 5mm, 10mm, 15mm, 20mm, 25mm +/- .05mm . Pad Size: 20mm x 20mm. Supplied With Holding Block. Material- 2024-T351 Aluminum (Surface Anodized for Corrosion Protection). Includes Test Report and Certificate of Confor | 1 | |
| AFNDT-3348/4340 | 7 STEP METRIC WEDGE: Step Sizes: 1mm, 3mm, 5mm, 10mm, 15mm, 20mm, 25mm +/- .05mm . Pad Size: 20mm x 20mm. Supplied With Holding Block. Material- 4340 Steel (Nickle Plated for Corrosion Protection). Includes Test Report and Certificate of Conformance. Manu | 1 | |
| AFNDT-3348/7075T6 | 7 STEP METRIC WEDGE: Step Sizes: 1mm, 3mm, 5mm, 10mm, 15mm, 20mm, 25mm +/- .05mm . Pad Size: 20mm x 20mm. Supplied With Holding Block. Material- 7075-T6 Aluminum (Surface Anodized for Corrosion Protection). Includes Test Report and Certificate of Conforma | 1 | |
| AFNDT-3348/TA6V | 7 STEP METRIC WEDGE: Step Sizes: 1mm, 3mm, 5mm, 10mm, 15mm, 20mm, 25mm +/- .05mm . Pad Size: 20mm x 20mm. Supplied With Holding Block. Material- 6AL-4V Titanium. Includes Test Report and Certificate of Conformance. Manufactured in Accordance to ASTM E797 | 1 | |
| AFNDT-3350AL | 5 STEP WEDGE .020", .030", .040", .080", .090". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3351AL | 8 STEP THICKNESS STANDARD. STEP SIZES: .015", .020", .025", .030", .035", .040", .045", .050" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 2024-T3 Aluminum. Supplied with Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3351AL-1 | 8 STEP THICKNESS STANDARD. STEP SIZES: .015", .020", .025", .030", .035", .040", .045", .050" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075-T6 Aluminum. Supplied with Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3351CS | 8 STEP THICKNESS STANDARD. STEP SIZES: .015", .020", .025", .030", .035", .040", .045", .050" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 1018 CARBON STEEL. Supplied with Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3354/2024-T3 | METRIC 5 STEP WEDGE, 5mm, 10mm, 15mm, 20mm, 25mm, +/- .05mm. Material: 2024-T3 Aluminum. Pad Size: 20mm x 20mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3354/7075-T6 | METRIC 5 STEP WEDGE, 5mm, 10mm, 15mm, 20mm, 25mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3356AL | 4 HOLE REFERENCE STANDARD. MATERIAL: 7075-T6, HOLE SIZES: 3/16",1/4", 3/4", 7/8". EDM NOTCH: .030" x .030" x .005+/- .001" CORNER NOTCH IN EACH HOLE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3357/2024T4 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008"(0.2mm), .020"(0.5mm), .040"(1.0mm) (.004"W +/- .001), 2024-T4 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance and Material Certification. | 1 | |
| AFNDT-3359 | Custom 10 Step Block, supplied with holding block. Step Sizes: 2.5mm, 5.0mm, 7.5mm, 10.0mm, 12.5mm, 15.0mm, 17.5mm, 20.0mm, 22.5mm and 25.0mm, Thickness Tolerance ±.05mm. Pad Size: 20mm X 20mm. Material: Duplex 2205 Stainless Steel. Includes certificatio | 1 | |
| AFNDT-3361/2024 | Custom Metric 6 Step Block. Step Thicknesses of 0.5mm, 2.5mm, 5.0mm, 7.5mm, 10.0mm and 12.5mm. (Tolerance: +/- 0.02mm). Pad Size: 20mm X 20mm, (Tolerance: +/- 0.5mm) Material: 2024-T3 Aluminum. Includes Certification Report for step thickness and Cer | 1 | |
| AFNDT-3361/7050 | Custom Metric 6 Step Block. Step Thicknesses of 0.5mm, 2.5mm, 5.0mm, 7.5mm, 10.0mm and 12.5mm. (Tolerance: +/- 0.02mm). Pad Size: 20mm X 20mm, (Tolerance: +/- 0.5mm) Material: 7050-T7 Aluminum. Includes Certification Report for step thickness and Cer | 1 | |
| AFNDT-3363 | 11 STEP THICKNESS STANDARD. STEP SIZES: .100", .150", .200", .250", .300", .350", .400", .450", .500", ..550", .600" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3364 | 11 STEP THICKNESS STANDARD. STEP SIZES: .100", .150", .200", .250", .300", .350", .400", .450", .500", ..550", .600" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3365 | 8 STEP WEDGE, STEP SIZES OF .030", .040", .050", .060", .070", .080", .090", and .100" +/- .001". PAD SIZE: .75 x .75 MATERIAL: AMS 4144, 2219-T8 ALUMINUM. Includes Test Report and Certificate of Conformance. Supply with MILL certificate. | 1 | |
| AFNDT-3365/1018 | 8 STEP WEDGE, STEP SIZES OF .030", .040", .050", .060", .070", .080", .090", and .100" +/- .001". PAD SIZE: .75 x .75 MATERIAL: 1018 Carbon Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3365AL | 8 STEP WEDGE, STEP SIZES OF .030", .040", .050", .060", .070", .080", .090", and .100" +/- .001". PAD SIZE: .75 x .75 MATERIAL: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3365SS | 8 STEP WEDGE, STEP SIZES OF .030", .040", .050", .060", .070", .080", .090", and .100" +/- .001". PAD SIZE: .75 x .75 MATERIAL: 304 Stainless Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3365TI | 8 STEP WEDGE, STEP SIZES OF .030", .040", .050", .060", .070", .080", .090", and .100" +/- .001". PAD SIZE: .75 x .75 MATERIAL: 6AL-4V Titanium. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3366/1018 | Custom 10 Step Block, 2.5mm, 5.0mm, 7.5mm, 10.0mm, 12.5mm, 15.0mm, 17.5mm, 20.0mm, 22.5mm and 25.0mm, Thickness Tolerance ±.05mm. Pad Size: 19mm X 19mm. Material: 1018 Steel. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3366/304SS | Custom 10 Step Block, 2.5mm, 5.0mm, 7.5mm, 10.0mm, 12.5mm, 15.0mm, 17.5mm, 20.0mm, 22.5mm and 25.0mm, Thickness Tolerance ±.05mm. Pad Size: 19mm X 19mm. Material: 304 Stainless Steel. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3367/625 | 5 STEP WEDGE 2.5mm, 5.0mm,7.5mm, 10.0mm, 12.5mm +/- 0.05mm, Pad Size: 25mm x 25mm. Material: 625 Inconel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3367/718 | 5 STEP WEDGE 2.5mm, 5.0mm,7.5mm, 10.0mm, 12.5mm +/- 0.05mm, Pad Size: 25mm x 25mm. Material: 718 Inconel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3369/7075T6 | Custom 8 hole 100° countersink reference standard Material: 7075-T6 Aluminum. Hole sizes: 5/32", 3/16", 7/32" 1/4", 5/16", 3/8", 7/16", 1/2". Countersink holes opposite side. Thru hole EDM notches in each hole, .020" Deep x .005" Wide +/-.001". Includes | 1 | |
| AFNDT-3371 | 8 Step Wedge For X-Ray . Material: Inconel 718. Step Sizes 0.125", .025", 0.375", 0.500", 0.625", 0.750", 0.875", 1.00". Tolerance ± .00078" (0.02mm). Pad Size: 20mm x 20mm(.787" x .787") Tolerance ± .0196" (0.5mm). Surface Finish: Ra 0.8µm (32 µin)max. I | 1 | |
| AFNDT-3386/7075T6 | 12 Hole Calibration Standard, Hole Sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters, .040 x .005 ±.002" Through EDM Notches in each Hole. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Confor | 1 | |
| AFNDT-3387AL | 6 Hole Metric reference standard. Material: 7075-T6 Aluminum. Hole Sizes: 20mm, 21mm, 22mm, 23mm, 24mm and 25mm. Corner EDM Notches: 1mm x 1mm x .15mm(.039" x .039" x .006"±.001"). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3388AL | Custom Metric 7 Step Block. Step Thicknesses: 0.5mm, 2.5mm, 4.5mm, 6.5mm, 8.5mm, 10.5mm & 12.5mm. (Tolerance: +/- 0.02mm). Pad Size: 20mm x 20mm. Material: 2024-T3 ALUMINUM. Supplied with Delrin Holding Block. Includes Certification Report for step thi | 1 | |
| AFNDT-3392TI | Custom Titanium multi-hole reference standard. Contains 9 hole sizes; 2.0mm, 2.5mm 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm and 6.0mm hole diameters. EDM notch 0.5mm X 7.5mm deep in each hole (half of the material thickness). Material: 6AL-4V Titanium 15m | 1 | |
| AFNDT-3394AL | 8 STEP WEDGE, STEP SIZES OF .015", .025",.040", .060", .080", .100", .150", and .200" +/- .001". PAD SIZE: .75"x.75", MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3395 | CUSTOM EC SKIN INSPECTION REFERENCE STANDARD. Contains various EDM Nothes in the Upper and Lower Skin. Upper Skin Thickness of .080" and Lower Skin Thickness of .100" Thick. Standard Physical Size = 13.5" Long x 5.15" Wide. MATERIAL: 2024-T3 ALUMINUM. I | 1 | |
| AFNDT-3398AL | 9 STEP THICKNESS STANDARD. STEP SIZES: .020", .030", .040", .050", .060", .070", .080", .090", .100" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075-T6 ALUMINUM.Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certifica | 1 | |
| AFNDT-3401AL | 7 STEP WEDGE. STEP SIZES: .040", .050", .060", .070", .080", .090", .100" +/- .001". PAD SIZE: 1.0"x 1.0", MATERIAL: 7075-T6 ALUMINUM SUPPLIED WITH ACETAL(DELRIN) HOLDING BLOCK. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3401CS | 7 STEP WEDGE. STEP SIZES: .040", .050", .060", .070", .080", .090", .100" +/- .001". PAD SIZE: 1.0"x 1.0", MATERIAL: 1018 CARBON STEEL SUPPLIED WITH ACETAL(DELRIN) HOLDING BLOCK. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3404AL | 5 STEP WEDGE .030", .050", .070", .090", .110". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3406-625 | 6 STEP CALIBRATION BLOCK, STEP SIZES .015", .020", .025", .030", .035", .040". MATERIAL: 625 Inconel. PAD SIZE: 1" X 1" X 6" ± .001". Supplied With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3406AL | 6 STEP CALIBRATION BLOCK, STEP SIZES .015", .020", .025", .030", .035", .040". MATERIAL: 2024-T3 Aluminum. PAD SIZE: 1" X 1" X 6" ± .001". Supplied With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3406AL-1 | 6 STEP CALIBRATION BLOCK, STEP SIZES .015", .020", .025", .030", .035" .040". MATERIAL: 7075-T6 Aluminum. PAD SIZE: 1" X 1" X 6" ± .001". Supplied With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3409AL | 9 STEP WEDGE, 0.5mm, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square Supplied with Acetal(Delrin) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3409ST | 9 STEP WEDGE, 0.5mm, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .05mm. Material: 4340 Steel. Pad Size: 19mm x 19mm square Supplied with Acetal(Delrin) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3409TI | 9 STEP WEDGE, 0.5mm, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .05mm. Material: 6AL-4V Titanium. Pad Size: 19mm x 19mm square Supplied with Acetal(Delrin) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3410AL | CUSTOM 5 STEP CALIBRATION BLOCK. MATERIAL: 2219-T851 ALUMINUM. STEP THICKNESSES OF 0.020", 0.040",0.060", .080", .100 +/-.001". PAD SIZE 1.0" x 1.0" . Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3412 | Custom Eddy Current Surface Standard with a Total of 12 EDM Notches. Notch Lenghs of .125, .250", .375" and .625". Notch Depths of .008", .020", and .040" for each length. Material: Nickel Aluminum Bronze. Includes Test Report and Certificate of Conforman | 1 | |
| AFNDT-3413 | Custom Boeing Eddy Current Hole Standard. Hole Sizes: .159 & .190"Ø. With one of each hole size plugged. Material: 2024-T3 Aluminum. Plugged holes contain a BACR15BA6A8C Rivet in the .056" plate. Apply BMS 545 sealant between each layer Includes Test Repo | 1 | |
| AFNDT-3414-625 | 6 STEP CALIBRATION BLOCK, STEP SIZES .050", .100", .200", .300", .400", .500". MATERIAL: 625 Inconel. PAD SIZE: 1" X 1" X 6" ± .001". Supplied With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3415 | CUSTOM 6 STEP CALIBRATION BLOCK. MATERIAL: 2219-T851 ALUMINUM. STEP THICKNESSES OF .025", .030", .035", .040", .045", .050" +/-.001". PAD SIZE 1.0" x 1.0" . Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3416 | 8 Step Wedge For X-Ray . Material: 304 Stainless Steel. Step Sizes 0.125", .250", 0.375", 0.500", 0.625", 0.750", 0.875", 1.00". Tolerance ± .00078" (0.02mm). Pad Size: 25mm x 25mm(1.0" x 1.0") Tolerance ± .0196" (0.5mm). Surface Finish: Ra 0.8µm (32 µin) | 1 | |
| AFNDT-3417/2024T3 | 5 STEP WEDGE,0.25mm, 0.50mm, 0.75mm, 1.00mm, 1.25mm, +/- .02mm. Material: 2024-T3 Aluminum. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3417/2024T42 | 5 STEP WEDGE,0.25mm, 0.50mm, 0.75mm, 1.00mm, 1.25mm, +/- .02mm. Material: 2024-T42 Aluminum. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3417/304SS | 5 STEP WEDGE,0.25mm, 0.50mm, 0.75mm, 1.00mm, 1.25mm, +/- .02mm. Material: 304 nStainless Steel. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3417/7075T6 | 5 STEP WEDGE,0.25mm, 0.50mm, 0.75mm, 1.00mm, 1.25mm, +/- .02mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3417/TI | 5 STEP WEDGE,0.25mm, 0.50mm, 0.75mm, 1.00mm, 1.25mm, +/- .02mm. Material: 6AL-4V Titanium. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3418/2024T3 | 8 STEP WEDGE, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .02mm. Material: 2024-T3 Aluminum. Pad Size: 20mm x 20mm ±.05mm square Supplied With Acetal( Delrin ) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3418/2024T42 | 8 STEP WEDGE, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .02mm. Material: 2024-T42 Aluminum. Pad Size: 20mm x 20mm ±.05mm square Supplied With Acetal( Delrin ) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3418/304SS | 8 STEP WEDGE, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .02mm. Material: 304 Stainless Steel. Pad Size: 20mm x 20mm ±.05mm square Supplied With Acetal( Delrin ) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3418/7075T6 | 8 STEP WEDGE, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .02mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm ±.05mm square Supplied With Acetal( Delrin ) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3418/TI | 8 STEP WEDGE, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .02mm. Material: 6AL-4V Titanium. Pad Size: 20mm x 20mm ±.05mm square Supplied With Acetal( Delrin ) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3419S | Custom 14 Step Block, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 9.0mm, 10.0mm, 14.0mm, 16.0mm, 40mm, 50mm and 60.0mm, Thickness Tolerance ±.05mm. Pad Size: 20mm X 20mm. Material: 4340 STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3423 | Eddy Current Reference Standard. Dimensions: 4" x 0.25" x 1" Material: Aluminum 7075-T7. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3425 | Custom Eddy Current Multi-Hole Reference Standard. Hole Diameters: 7.0 mm, 7.5 mm, 8.0 mm, 8.5 mm, 9.0 mm, 9.5 mm, 10.0 mm, 10.5mm, 11.0 mm, 11.5 mm, 12.0 mm, 12.5 mm, 13.0 mm, 13.5 mm, 14.0 mm. Two (2) EDM notches per hole.Material: Aluminium 7075-T76. | 1 | |
| AFNDT-3426 | Custom Eddy Current Hole Standard. Hole Diameters: 4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, 6.5 mm, 7.0 mm, 7.5 mm, 8.0 mm, 8.5 mm, 9.0 mm, 9.5 mm, 10.0 mm, 10.5 mm, 11.0 mm, 11.5 mm, 12.0 mm. Material: Aluminium 7050-T74. Includes Test Report and Certific | 1 | |
| AFNDT-3427AL | 1/8" HOLE STANDARD IN 7075-T6 with .020" x .020" x .005" CORNER EDM NOTCH. MATERIAL SIZE 2.0" x 2.0" x .375". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3428 | CUSTOM SURFACE CALIBRATION BLOCK. MATERIAL: 7075-T73 ALUMINUM. 3 EDM NOTCH SIZES: 2.0mm(.078") LONG x 0.1mm(.0039") WIDE x 0.25mm(.010") DEEP. 6.35mm(.25") LONG x 0.1mm(.0039") WIDE x 0.5mm(.019") DEEP. 1.5mm(.059") LONG x 0.1mm(.0039") WIDE x 0.76mm(. | 1 | |
| AFNDT-3432/2050AL | 7 STEP WEDGE .050", .100",. 150", .200", .250", .300", .350". MATERIAL: 2050 ALUMINUM. PAD SIZE: 1.0" x 1.0" TOLEREANCE = +/- .001. Supplied With Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3432/2195AL | 7 STEP WEDGE .050", .100",. 150", .200", .250", .300", .350". MATERIAL: 2195 ALUMINUM. PAD SIZE: 1.0" x 1.0" TOLEREANCE = +/- .001. Supplied With Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3432/6061AL | 7 STEP WEDGE .050", .100",. 150", .200", .250", .300", .350". MATERIAL: 6061 ALUMINUM. PAD SIZE: 1.0" x 1.0" TOLEREANCE = +/- .001. Supplied With Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3433/7075T6 | 5 STEP WEDGE, 10mm, 20mm, 30mm, 40mm, 50mm, +/- .05mm. Material: 7075 Aluminum. Pad Size: 25mm x 25mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3437AL | CUSTOM 4 STEP METRIC CALIBRATION BLOCK. MATERIAL: 7075-T6 ALUMINUM. STEP SIZES: 5mm, 10mm,15mm and 20mm. PAD SIZE: 20mm x 20mm, Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3437SS | CUSTOM 4 STEP METRIC CALIBRATION BLOCK. MATERIAL: 304 STAINLESS STEEL. STEP SIZES: 5mm, 10mm,15mm and 20mm. PAD SIZE: 20mm x 20mm, Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3439/6AL-4V | EDDY CURRENT SUIRFACE STANDARD WITH A TOTAL OF THREE A3 TYPE SURFACE NOTCHES ORIENTATED AT 0°, 45° and 90°. MATERIAL: 6AL-4V TITANIUM. SIZE: 2.0" Wide X 4.0" Wide. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3439/718 | EDDY CURRENT SUIRFACE STANDARD WITH A TOTAL OF THREE A3 TYPE SURFACE NOTCHES ORIENTATED AT 0°, 45° and 90°. MATERIAL: 718 INCONEL SIZE: 2.0" Wide X 4.0" Wide. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3440/304 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .010"(0.254mm), .020"(0.508mm), .050" (1.27mm) (.004"W +/- .001). Material: Non-Magnetic 304 Stainless Steel. SIZE: 1.0"W x 3.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3440/6AL-4V | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .010"(0.254mm), .020"(0.508mm), .050" (1.27mm) (.004"W +/- .001). Material: 6AL-4V Titanium. SIZE: 1.0"W x 3.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3441AL | 10 STEP REFERENCE BLOCK SUPPLIED WITH DELRIN HOLDING BLOCK, STEP SIZES: .015", .025", .035", .045", .055", .065", .075", .085", .095",.105". PAD SIZE: 1.0" x 1.0". MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance | 1 | |
| AFNDT-3443AL | Metric 6 Step Wedge, 2mm, 4mm, 6mm, 8mm, 10mm, 20mm ± .5mm, Pad Size: 25mm X 25mm. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3444/316 | Metric 5 Step Wedge, 5mm, 10mm, 15mm, 20mm, 25mm ± .5mm, Pad Size: 25mm X 25mm. Material: 316 Stainless Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3444/4340 | Metric 5 Step Wedge, 5mm, 10mm, 15mm, 20mm, 25mm ± .5mm, Pad Size: 25mm X 25mm. Material: 4340 Carbon Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3445AL | METRIC 5 STEP WEDGE, 10mm, 15mm, 20mm, 25mm, 30mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 25mm x 25mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3446 | SURFACE STANDARD MATERIAL: 7075-T6 or 2024-T3 ALUMINUM. EDM SLOT (0.5mm(.020") DEEP) x (0.13mm(.05") WIDE) +/-.03mm. BLOCK SIZE 3.50" X 1.0" X .50 Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3447/4340 | 5 STEP THICKNESS STANDARD. STEP SIZES: .010", .020", .030", .040", .050", +/-.001". MATERIAL: 4340 STEEL. PAD SIZE .75" X .75" WITH HOLDER. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3448 | 4 STEP CARBON STEEL WEDGE. STEP THICKNESS OF: 1.000”, 2.000”, 4.000”, 6.000” +/-.001". 1.0" x 1.0" Pad Size. Material: 1018 Carbon Steel. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3449/2024AL | 8 STEP WEDGE, STEP SIZES: .030", .040", .050", .060", .070", .080", .090", and .100" +/- .001". PAD SIZE: 1.0" x 1.0" Supplied With Delrin Holding Block. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3449/304SS | 8 STEP WEDGE, STEP SIZES: .030", .040", .050", .060", .070", .080", .090", and .100" +/- .001". PAD SIZE: 1.0" x 1.0" Supplied With Delrin Holding Block. MATERIAL: 304 STAINLESS STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3449/6AL-4V | 8 STEP WEDGE, STEP SIZES: .030", .040", .050", .060", .070", .080", .090", and .100" +/- .001". PAD SIZE: 1.0" x 1.0" Supplied With Delrin Holding Block. MATERIAL: 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3449/7075AL | 8 STEP WEDGE, STEP SIZES: .030", .040", .050", .060", .070", .080", .090", and .100" +/- .001". PAD SIZE: 1.0" x 1.0" Supplied With Delrin Holding Block. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3450 | 6 STEP WEDGE 0.050”, 0.100”, 0.200”, 0.350”, 0.500”, 0.750”, +/-.001", Material: 1018 Steel 0.75" x 0.75" Pad Size. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3451 | 10 STEP WEDGE 0.050”, 0.100”, 0.200”, 0.350”, 0.500”, 0.750”, 1.000", 2.000", 4.000", 6.000". +/-.001", Material: 1018 Steel 1.0" x 1.0" Pad Size. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3452AL | 8 Step Calibration Block, Material 7075-T6 Aluminum. Steps: 1mm, 2mm, 4mm, 6mm, 8mm, 10mm, 15mm, 20mm. (Tolerance: +/-0.02mm).- Pad Size: 19mm x 19mm (Tolerance: +/- 0.5mm). Includes Certification Report and Certificate of Conformance. | 1 | |
| AFNDT-3454 | 5 STEP WEDGE .020", .040", .060", .080", .120". MATERIAL: 360 BRASS. PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3455/2024T3 | 7 STEP WEDGE. STEP SIZES OF .100", .200", .300", .400", .500", .600", and .700" +/- .001". PAD SIZE: 1.0" x 1.0", MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3455/6061T6 | 7 STEP WEDGE. STEP SIZES OF .100", .200", .300", .400", .500", .600", and .700" +/- .001". PAD SIZE: 1.0" x 1.0", MATERIAL: 6061-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3455/7075T6 | 7 STEP WEDGE. STEP SIZES OF .100", .200", .300", .400", .500", .600", and .700" +/- .001". PAD SIZE: 1.0" x 1.0", MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3457 | EDDY CURRENT SURFACE REFERENCE STANDARD. Cadmium plated on one side to AMS-QQ-P-416-f Type 1, Class 2. 3 EDM FLAWS ON BOTH SIDES. ONE SIDE UNPLATED(BARE). NOTCH DEPTHS : .008", .020", .040". NOTCH WIDTH: (.004"W +/- .002). MATERIAL: 4340 STEEL. SIZE: 1. | 1 | |
| AFNDT-3461/C110 | 4 STEP THICKNESS STANDARD. STEP SIZES: .050", .100", .150", .250". +/-.001". PAD SIZE .75" x .75". MATERIAL: C-110 Copper. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3462AL | 10 STEP REFERENCE BLOCK, Step Pad Thicknesses: .010", .020", .040", .060", .080", .100", .150", .200", .250", .300", +/-.001" . Material: Anodized 7075-T6 ALUMINUM, Pad Size: .75" x 75" with Acetal( Delrin) holding block. Includes Test Report and Ce... | 1 | |
| AFNDT-3464S | Custom Metric 6 Step Wedge. Step Thicknesses of 10mm, 15mm, 20mm, 25mm, 30mm, 35mm. (Tolerance: +/- 0.02mm). Pad Size: 19mm X 19mm, (Tolerance: +/- 0.5mm) Material: 1018 Steel. Includes Certification Report Traceable to NIST and Certificate of Conform | 1 | |
| AFNDT-3465S | Custom Metric 7 Step Wedge. Step Thicknesses of 1mm, 2mm, 4mm, 6mm, 8mm, 10mm, 15mm. (Tolerance: +/- 0.02mm). Pad Size: 19mm X 19mm, (Tolerance: +/- 0.5mm) Material: 1018 Steel. Includes Certification Report Traceable to NIST and Certificate of Confor | 1 | |
| AFNDT-3466S | Custom Metric 11 Step Wedge. Step Thicknesses of 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 15mm. (Tolerance: +/- 0.02mm). Pad Size: 19mm X 19mm, (Tolerance: +/- 0.5mm) Material: 1018 Steel. Includes Certification Report Traceable to NIST and | 1 | |
| AFNDT-3467AL | 8 STEP ALUMINUM WEDGE, STEP SIZES: .150", .175",.195", .215", .245", .285", .310", and .330" +/- .001". PAD SIZE: 1.0" L x .75" W, MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3468MG | 5 STEP WEDGE, STEP THICKNESSES OF .100", .150", .200", .250", .300". TOLERANCE +/-.001". MATERIAL: MAGNESIUM. PAD SIZE:75"x.75". Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3469TI | 8 STEP THICKNESS STANDARD. STEP SIZES: .039", .078", .117", .156", .195", .234", .273", .312" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3477AL | METRIC 10 STEP ALUMINUM CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 25mm X 25mm. Material: 2024-T3 Aluminum Supplied with a Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3477CS | METRIC 10 STEP CARBON STEEL CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 25mm X 25mm. Material: 1018 or 4340 Carbon Steel Supplied with a Delrin Holding Block. Includes Test Report and Certificate of Conform... | 1 | |
| AFNDT-3477TI | METRIC 10 STEP TITANIUM CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 25mm X 25mm. Material: 6AL-4V Titanium Supplied with a Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3478TI | 5 STEP WEDGE .024", .040", .060", .080", .100". TOLERANCE +/-.002". ..MATERIAL: 6AL-4V TITANIUM . PAD SIZE: 75" x .75" .Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3479TI | 7 STEP CALIBRATION BLOCK. MATERIAL: 6AL-4V TITANIUM. STEP THICKNESS: 0.024", 0.040", 0.060", 0.800", 0.100", .150" 0.200" +/- .001". STEP PAD SIZE: .75" x .75". Note: The first and last pad is 1.0" long. Supplied With Delrin Holding Block Includes certi | 1 | |
| AFNDT-3483AL | BOEING 2 STEP CALIBRATION BLOCK, PT 4 51-00-00 PAGE 6 FIGURE 2, MATERIAL: 7075-T6 Aluminum. Step Size: 0.150" and 0.300" ±.0.002. PAD SIZE: 1.0" X 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3483CS | BOEING 2 STEP CALIBRATION BLOCK, PT 4 51-00-00 PAGE 6 FIGURE 2, MATERIAL: LOW CARBON STEEL SUCH AS 1018, 4130 or 4340. Step Size: 0.150" and 0.300" ±.0.002. PAD SIZE: 1.0" X 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3484AL | Eddy Current Bolt Hole Calibration standard, 5 Hole Sizes. Material: 7075-T6 Aluminium, Hole diameters: .750", .875",1.00" 1.125" 1.187", .030" x .030" x .005" ± .001" Corner EDM Notch in each hole. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3485AL | Eddy Current Bolt Hole Calibration standard, 3 Hole Sizes. Material: 7075-T6 Aluminium, Hole diameters: 1.250" 1.375", 1.500", .030" x .030" x .005" ± .001" Corner EDM Notch in each hole. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3486/15-5PH | 8 STEP WEDGE, STEP SIZES: 0.125", 0.150", 0.289", 0.300", 0.350", 0.476", 0.500", 0.650" +/- .001". PAD SIZE: 1.0" x 1.0". MATERIAL: 15-5PH STAINLESS STEEL SUPPLIED WITH DELRIN HOLDING BLOCK. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3487/4130 | 5 STEP WEDGE .050", .100", .200", .400", .500". TOLERANCE +/-.001". MATERIAL: 4130 STEEL SUPPLIED WITH HOLDING BLOCK. PAD SIZE: 1.0" x 1.0" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3487/TI | 5 STEP WEDGE .050", .100", .200", .400", .500". TOLERANCE +/-.001". MATERIAL: 6AL-4V TITANIUM SUPPLIED WITH HOLDING BLOCK. PAD SIZE: 1.0" x 1.0" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3488/AL | 5 STEP WEDGE .032", .064", .128", .256", .500". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM SUPPLIED WITH HOLDING BLOCK. PAD SIZE: 1.0" x 1.0" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3489/AL | 9 STEP WEDGE: .010", .020" .032", .040", .050", .064", .128", .256", .500". TOLERANCE +/-.001". MATERIAL: 2024-T3 ALUMINUM SUPPLIED WITH HOLDING BLOCK. PAD SIZE: 1.0" x 1.0" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3491AL | METRIC 6 STEP WEDGE. STEP SIZE: 0.6mm, 1mm, 3mm, 7mm, 13mm, 20mm +/- .03mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3492AL | METRIC 5 STEP WEDGE: STEP SIZE: 2mm, 5mm, 10mm, 15mm, 20mm +/- .03mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3493AL | 7 STEP REFERENCE BLOCK ..STEP PAD SIZE: 1.0" X 1.0" MATERIAL: 7075-T6 ALUMINUM. STEP RANGE:.100", .200", .300", .400", .500", .600", .700" +/- .001". Includes certification report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3496CS | 8 STEP WEDGE, STEP SIZES: .020", .025", .030", .040", .050", .060", .080", and .100" +/- .001". PAD SIZE: .75" x .75" Supplied With Delrin Holding Block. MATERIAL: 4340 Steel . Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3496TI | 8 STEP WEDGE, STEP SIZES: .020", .025", .030", .040", .050", .060", .080", and .100" +/- .001". PAD SIZE: .75" x .75" Supplied With Delrin Holding Block. MATERIAL: 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3499 | EDDY CURRENT SURFACE REFERENCE STANDARD. Low Hydrogen Embrittlement Cadmium-Titaniium Alloy Plating per BAC5804. 4 EDM FLAWS ON BOTH SIDES. ONE SIDE UNPLATED(BARE). NOTCH DEPTHS : .005", .010", .020", .050". NOTCH WIDTH: (.007" +/- .002"). MATERIAL: 4... | 1 | |
| AFNDT-3504TI | 12 HOLE REFERENCE STANDARD MANUFACTURED TO SPECIFICATION USAF T.O. 33-B-1-1. MATERIAL: 6AL-4V TITANIUM. HOLE SIZES: 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/ 16" 5/8", 3/4" 0.020" x 0.004" +/-.001" Wide thru EDM NOTCHES. 4 tot... | 1 | |
| AFNDT-3505/6061-T4 | METRIC 10 STEP CALIBRATION BLOCK, 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm ± .05mm. Pad Size: 20mm X 20mm. Material: 6061-T4 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3506 | SINGLE HOLE REFERENCE STANDARD, HOLE SIZE 3.0", EDM CORNER NOTCH: .030" x .030" x .005 ± .002", MID-WALL NOTCH:.060" x .030" DEEP +/-.002". MATERIAL: 7075-T6 DIMENSIONS: 4.0" x 4.0" x 0.5" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3509 | SINGLE HOLE REFERENCE STANDARD, HOLE SIZE 27.7mm(1.090"), EDM CORNER NOTCH: .030" x .030" x .005 ± .002", MATERIAL: 7075-T6 DIMENSIONS: 3.0" x 3.0" x 0.5" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3510/2024T3 | Contains 12 hole sizes; 187", .203", .218", .234", .250", .265", .281", .296", .312", .328", .343" and .359" diameters. ( .030" x .030" Corner EDM Notch and 3 Surface EDM Notches .010", .020", .040" Deep x .750" Long.) Material: 2024-T3 Aluminum. Inclu... | 1 | |
| AFNDT-3510/6AL4V | Contains 12 hole sizes; 187", .203", .218", .234", .250", .265", .281", .296", .312", .328", .343" and .359" diameters. ( .030" x .030" Corner EDM Notch and 3 Surface EDM Notches .010", .020", .040" Deep x .750" Long.) Material: 6AL-4V Titanium. Includ... | 1 | |
| AFNDT-3514AL | 5 STEP WEDGE .075", .150", .225", .300", .375". TOLERANCE +/-.001". MATERIAL: 7050-T7 ALUMINUM. PAD SIZE: 1.0" x 1.0" . Includes Test Report traceable to NIST and Certificate of Conformance. Meets ASTM E797/797M | 1 | |
| AFNDT-3515AL | 5 STEP WEDGE .050", .125", .200", .275", .350". TOLERANCE +/-.001". MATERIAL: 7050-T7 ALUMINUM. PAD SIZE: 1.0" x 1.0" . Includes Test Report traceable to NIST and Certificate of Conformance. Meets ASTM E797/797M | 1 | |
| AFNDT-3516/15-5PH | 6 STEP CALIBRATION BLOCK, MATERIAL: 15-5PH STEEL. PAD SIZE: .75" x .75". STEP SIZES: .030", .100", .200", .300", .400", .500" ± .001". Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3517/2024 | 10 STEP WEDGE. STEP THICKNESS OF , .025", .050", .100", .200", .300", .400", .500", .600", .800" 1.000" +/-.03mm Pad Size: 12.5mm" x 25mm" . Material: 2024-T3 Aluminum. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3517/7075 | 10 STEP WEDGE. STEP THICKNESS OF , .025", .050", .100", .200", .300", .400", .500", .600", .800" 1.000" +/-.03mm Pad Size: 12.5mm" x 25mm" . Material: 7075-T6 Aluminum. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3517MAG | 10 STEP WEDGE. STEP THICKNESS OF , .025", .050", .100", .200", .300", .400", .500", .600", .800" 1.000" +/-.03mm. Pad Size: 12.5mm" x 25mm" . Material: AZ91E Magnesium. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3517SS | 10 STEP WEDGE. STEP THICKNESS OF , .025", .050", .100", .200", .300", .400", .500", .600", .800" 1.000" +/-.03mm Pad Size: 12.5mm" x 25mm" . Material: 304 Stainless Steel. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3517TI | 10 STEP WEDGE. STEP THICKNESS OF , .025", .050", .100", .200", .300", .400", .500", .600", .800" 1.000" +/-.03mm Pad Size: 12.5mm" x 25mm" . Material: 6AL-4V Titanium. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3520MAG | 16 STEP WEDGE. STEP THICKNESS OF , .0625", .125", .187", .250", .312", .375", .437", .500", .562" .625", 687", .750", .812", .875", .937", 1.00" +/-.002". Pad Size: .620" x 1.5" . 9.20" Long x 1.5" Wide Finished Size. Material: AZ91E Magnesium. Includes | 1 | |
| AFNDT-3521AL | 5 STEP METRIC WEDGE , 2mm, 4mm, 6mm, 8mm, 10mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square Supplied with Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3522AL | CUSTOM EDDY CURRENT SURFACE REFERENCE STANDARD, 3 EDM SLOTS .008",.020",.040" .006" ±.001". MATERIAL: 7075-T6 ALUMINUM. SIZE: .312" THICK x 1.375 WIDE x 3.156". Includes Test Report and Certifictate of Conformance. | 1 | |
| AFNDT-3522SS | CUSTOM EDDY CURRENT SURFACE REFERENCE STANDARD, 3 EDM SLOTS .008",.020",.040" .006" ±.001". MATERIAL: 304 STAINLESS STEEL. SIZE: .312" THICK x 1.375 WIDE x 3.156". Includes Test Report and Certifictate of Conformance. | 1 | |
| AFNDT-3522ST | CUSTOM EDDY CURRENT SURFACE REFERENCE STANDARD, 3 EDM SLOTS .008",.020",.040" .006" ±.001". MATERIAL: 4340 STEEL. SIZE: .312" THICK x 1.375 WIDE x 3.156". Includes Test Report and Certifictate of Conformance. | 1 | |
| AFNDT-3523AL | 4 Step Calibration Block, 1.250", 1.500", 1.750", 2.000". Tolerance= ± .002" MATERIAL: 7075-T6 Aluminum. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3523CS | 4 Step Calibration Block, 1.250", 1.500", 1.750", 2.000". Tolerance= ± .002" MATERIAL: 4340 Carbon Steel. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3523MAG | 4 Step Calibration Block, 1.250", 1.500", 1.750", 2.000". Tolerance= ± .002" MATERIAL: Magnesium. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3523SS | 4 Step Calibration Block, 1.250", 1.500", 1.750", 2.000". Tolerance= ± .002" MATERIAL: 304 Stainless Steel. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3523TI | 4 Step Calibration Block, 1.250", 1.500", 1.750", 2.000". Tolerance= ± .002" MATERIAL: 6AL-4v Titanium. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3524AL | 4 HOLE REFERENCE STANDARD. Material: 7075-T6 Aluminum 10" x 3.5" x .375" , HOLE SIZES: 1.25", 1.50", 1.75", 2.00". EDM NOTCH: .030" x .030" x .005 ± .001" CORNER NOTCH IN EACH HOLE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3524CS | 4 HOLE REFERENCE STANDARD. Material: 4130 or 4340 Carbon Steel 10" x 3.5" x .375" , HOLE SIZES: 1.25", 1.50", 1.75", 2.00". EDM NOTCH: .030" x .030" x .005 ± .001" CORNER NOTCH IN EACH HOLE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3524SS | 4 HOLE REFERENCE STANDARD. Material: 304 Stainless Steel 10" x 3.5" x .375" , HOLE SIZES: 1.25", 1.50", 1.75", 2.00". EDM NOTCH: .030" x .030" x .005 ± .001" CORNER NOTCH IN EACH HOLE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3524TI | 4 HOLE REFERENCE STANDARD. Material: 6AL-4v Titanium 10" x 3.5" x .375" , HOLE SIZES: 1.25", 1.50", 1.75", 2.00". EDM NOTCH: .030" x .030" x .005 ± .001" CORNER NOTCH IN EACH HOLE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3525MAG-1 | 2 HOLE REFERENCE STANDARD. Material: Magnesium 5.0" x 3.5" x .375" , HOLE SIZES: 1.25", 1.50". EDM NOTCH: .030" x .030" x .005 ± .001" CORNER NOTCH IN EACH HOLE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3525MAG-2 | 2 HOLE REFERENCE STANDARD. Material: Magnesium 5.0" x 3.5" x .375" , HOLE SIZES: 1.75", 2.00". EDM NOTCH: .030" x .030" x .005 ± .001" CORNER NOTCH IN EACH HOLE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3529AL | 4 Step Calibration Block, .750", 1.000", 1.250", 1.500". Tolerance= ± .002" MATERIAL: 2024-T3 Aluminum. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3530TI | METRIC 5 STEP WEDGE, 1mm, 3mm, 7mm, 12mm, 15mm +/- .05mm. Material: 6Al-4v Titanium. Pad Size: 25mm x 25mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3532 | 6 STEP WEDGE, .045", .005", .015", .025", .035", .045" ± .001". Material: 6061-T6 Aluminum. Pad Size: 1.0" x 1.0" square with .500" Steps on the ends. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3533 | 6 STEP WEDGE, .045", .010", .020", .030", .040", .045" ± .001". Material: 6061-T6 Aluminum. Pad Size: 1.0" x 1.0" square with .500" Steps on the ends. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3536AL | METRIC 5 STEP WEDGE. STEP SIZES: 12.5mm, 16mm, 20mm, 25mm, 30mm STEP TOLERANCE +/-.03mm(.00118"). MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 25mm x .25mm. Includes Test Report traceable to NIST, Mill Certificate for Material and Certificate of Conformance. | 1 | |
| AFNDT-3537AL | METRIC 5 STEP WEDGE. STEP SIZES: 0.40mm, 0.65mm, 1.3mm, 2.0mm, 2.5mm STEP TOLERANCE +/-.03mm(.00118"). MATERIAL: 2024-T3 ALUMINUM .PAD SIZE: 25mm x .25mm. Supplied with Delrin Holding Block. Includes Test Report traceable to NIST, Mill Certificate f... | 1 | |
| AFNDT-3541AL | EDDY CURRENT SURFACE STANDARD MANUFACTURED TO BSS 7698,..3 EDM NOTCHES: ( .010", .020", .030" Deep x .005" Wide ± .001 ), MATERIAL: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3541ST | EDDY CURRENT SURFACE STANDARD MANUFACTURED TO BSS 7698,.. 3 EDM NOTCHES: ( .010", .020", .030" Deep x .005" Wide ± .001 ), MATERIAL: 4340 Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3541TI | EDDY CURRENT SURFACE STANDARD MANUFACTURED TO BSS 7698, ..3 EDM NOTCHES: ( .010", .020", .030" Deep x .005" Wide ± .001 ), MATERIAL: 6AL-4V Titanium. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3542AL | METRIC 5 STEP WEDGE 0.6mm(.024"),5.44mm( .214"),10.26mm( .404"),15.09mm( .594"), 20mm(.787"). TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certif... | 1 | |
| AFNDT-3544/2219-T8 | 10 STEP REFERENCE BLOCK .038, .045, .055, .065, .080, .100, .125, .150", .175", .200", ± .001" Supplied with Delrin Holding Block... Pad Size: .800" x .800" ± 0.010" Material: 2219-T8. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3545AL | Custom 4 Step Flat Bottom Hole CRS. Step Thicknesses of 2mm, 3mm, 6mm, 15mm. 12 total Flat Bottom Holes 1.2mm(.047")Ø (Tolerance: ± 3% ). Pad Size: WIDTH 40mm ± 1mm x LENGTH 60mm ± 0.2mm. Material: 7075-T6 Aluminum anodized for corrosion protection.... | 1 | |
| AFNDT-3545TI | Custom 4 Step Flat Bottom Hole CRS. Step Thicknesses of 2mm, 3mm, 6mm, 15mm. 12 total Flat Bottom Holes 1.2mm(.047")Ø (Tolerance: ± 3% ). Pad Size: WIDTH 40mm ± 1mm x LENGTH 60mm ± 0.2mm. Material: 6AL-4v Titanium. Includes Certification Report and... | 1 | |
| AFNDT-3546AL | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHE SIZES: .005"(.127mm) , .020"(0.5mm), .050"(1.27mm) (.005"W +/- .001). MATERIAL: 7075-T6 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3547CS | 5 STEP WEDGE, .020", .030", .040", .050", .060". TOLERANCE +/-.001". MATERIAL: 4340 Steel . PAD SIZE: .75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3548/7075 | 5 STEP WEDGE, 1mm, 3mm, 5mm, 7mm, 10mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square supplied with Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3549 | Custom 4 hole standard. Material 17-4PH or 17-7PH Stainless. Size: 6.0" x 4.65" x .375" Thick. Hole Diameters: 1.125",1.190",1.250", and..1.3750" EDM Corner Notch .030" x .030" x .005" ± .001" in each hole. Includes Test Report and Certificate of C... | 1 | |
| AFNDT-3550 | Custom Bolt Hole Standard. Material: .250" Thick 718 Inconel. Hole size .320"Ø with a .030" x .030" EDM corner notch. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3552TI | 5 Step calibration block (0.100", 0.250", 0.500", 0.750" and 1.000"; . Step pad size: .75” x .75”. Material: 6AL-4V Titanium. Includes Test Report and Certificate of Conformance.....Reference: B777 NTM Part4 51-00-10 | 1 | |
| AFNDT-3556AL | 8 STEP WEDGE, STEP SIZES OF .060", .070",.085", .100", .120", .145", .175", and .210" +/- .001". PAD SIZE: .80"x.80", MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3557AL | 8 STEP WEDGE, STEP SIZES OF .018", .021",.025", .030", .035", .040", .045", and .050" +/- .001". PAD SIZE: .80"x.80", MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3558/7075T6 | 10 STEP WEDGE SUPPLIED WITH DELRIN HOLDING BLOCK. STEP SIZES: .020", .040", .60", .80", .100", .120", .140", .160", .180", .200" +/-.001". Material: 7075-T6 ALUMINUM. PAD SIZE: .75" x .75". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3559AL-3 | 15 HOLE REFERENCE STANDARD, Material: 7075-T6 Aluminum. Hole Sizes: 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1.0. A Total 15 Mid-bore notch @ 0.030" deep x 0.004" wide x 0.060" long in each hole. 3 Surface EDM No... | 1 | |
| AFNDT-3560A | Corrosion Reference Standard used for verifying function of low frequency corrosion probes. It is 0.100” thick with simulated 5%, 10% and 20% material loss. Overall size: 7.50” x 3.50” (190 x 89 mm). Material: 2024-T3 Aluminum. Includes Certification. | 1 | |
| AFNDT-3560B | Corrosion Reference Standard used for verifying function of low frequency corrosion probes. It is 0.100” thick with simulated 5%, 10% and 20% material loss. Overall size: 7.50” x 3.50” (190 x 89 mm). Material: 7075-T6 Aluminum. Includes Certification. | 1 | |
| AFNDT-3582/4340 | MATERIAL: 4340 CARBON STEEL (8 STEPS: 0.6, 1, 3, 5, 7, 10, 15, 20 MM) | 1 | |
| AFNDT-3669-1043 | BOEING COUNTERSINK REFERENCE STANDARD 737 PT6 51-00-00 PROCEDURE 19, 0.375” DIAMETER 100° COUNTERSINK HOLE. MATERIAL: 43404340M STEEL. SIZE: 2.0" X .375" THICK( ROUNDSQUARE. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| AFNDT-4010/2024T3 | 6 STEP WEDGE: 0.030 in. (0.762 mm), 0.050 in. (1.27 mm), 0.100 in.(2.54 mm), 0.150 in (3.81 mm), 0.300 in. (7.62 mm), and 0.500 in. (12.70 mm) +/-.001", Material: 2024-T3 Aluminum. Pad Size: 0.75" x 0.75" , BLOCK SIZE: 4.50" L x .750"W SUPPLIED WITH D | 1 | |
| AFNDT-4010/7075T6 | 6 STEP WEDGE: 0.030 in. (0.762 mm), 0.050 in. (1.27 mm), 0.100 in.(2.54 mm), 0.150 in (3.81 mm), 0.300 in. (7.62 mm), and 0.500 in. (12.70 mm) +/-.001", Material: 7075-T6 Aluminum. Pad Size: 0.75" x 0.75" , BLOCK SIZE: 4.50" L x .750"W SUPPLIED WITH D | 1 | |
| AFNDT-4072G | PROBE GUIDE FOR BOEING 747 PT 6 53-30-05. Material Delrin. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-7003TI | 12 HOLE REFERENCE STANDARD. MATERIAL: 6AL-4V Titanium.Hole Sizes: (3/16", 7/32" ,1/4", 9/32", 5/16",11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4"), .020" X .005" WIDE +/-.001" THROUGH EDM NOTCH IN EACH HOLE. Includes Test Report, Conductivity and Certi... | 1 | |
| AFNDT-CRJ200/CRS | SURFACE REFERENCE STANDARD, ALUMINUM, .005W x .008", .020", .040" EDM NOTCH DEPTHS . MATERIAL 2024-T3 AL...CRJ200 PART1 51-20-06 PG.9 | 1 | |
| AFNDT-PR-T-2521/22 | CUSTOM EDDY CURRENT SURFACE CALIBRATION BLOCK. PER CUSTOMER SUPPLIED DRAWING. MATERIAL: 7075-T6 Aluminum. EDM Notch size 1mm (.040') , .76mm(.030"), .2mm(.008") deep x .1mm(.004") wide +/- .002". Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0541 | A 5 MHZ TRANSDUCER WITH A TOP MOUNTED CONNECTOR THAT PUTS A 75 DEGREE SHEAR WAVE INTO ALUMINUM. APPROXIMATE CASE DIMENSIONS: 0.750 INCH (19.05 MM) LON | 1 | |
| AGE 00699-401 | LOCK OPEN PNEUMATIC STATING VALVE | 3 | |
| AGE 04369-401 | ADAPTER SET PNEUMATIC SYSTEM | 3 | |
| AGE-00699-401 | LOCK-OPEN, PNEUMATIC STARTING VALVE | 3 | |
| AGE-00704-401 | SAFETY PIN FOR PNEUMATIC ASSY | 7 | |
| AGE-01867-401 | PMAT SUPPORT BAG | 2 | |
| AGE-02321-401 | Embraer 170 Reference Standard. Material: 2024-T351 Clad. Top skin = 0.040, Lower skin = 0.080. Rivet - MS2047AD-5. Includes Test Report and Certificate of Conformance. | 1 | |
| AGE-03132-401 | ADAPTERS SET - TEST, PNEUMATIC SYSTEM | 1 | |
| AGE-03586-401 | PNEUMATIC UNIT,EN-GINE START | 7 | |
| AGE-04369-401 | ADAPTERS SET - TEST, PNEUMATIC SYSTEM | 3 | |
| AGE-04369-401 | ADAPTERS - TEST, PNEUMATIC SYSTEM | 3 | |
| AGE11731 | SEAL PLATE MATING SURFACE PROTECTOR | 2 | |
| AGE12973 | SEAL PLATE MATING SURFACE PROTECTOR | 2 | |
| AGE13296 | FACE SEAL & MATING RING PULLER ASSEMBLY | 1 | |
| AGE13300 | FACE SEAL & MATING RING PULLER ASSEMBLY | 1 | |
| AGIT0001 | GAU ARCS REMOVAL/INSTALLATION MATING RING LINES ATS-HP1-FP-HP2 | 1 | |
| AGSE-E111-G02 | PNEUMATIC TIRE DOLLY | 1 | |
| AID-01432 | Removal Tool, APU AGB Mating Ring | 2 | |
| AID01432 | REMOVAL TOOL − APU AGB MATING RING | 2 | |
| AIR-SQUEEZER | PNEUMATIC SQUEEZER TOOL | 1 | |
| AIR-THYCOL-GUN | PNEUMATIC THYCOL GUN TOOL | 1 | |
| AL 29-32 | BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-20-001. Also in 53-30-19 PART 6 PAGE 6 FIGURE 2. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL 2024-T3 ALUMINUM. SIZE: 1.5"W x 3.75"L x .25" | 6 | |
| AL 35-45 | BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-70-001. ALSO IN 53-10-01 PART 6 PAGE 5 FIGURE 1. EDM Notches: .008", .020", .040" ( .005" Wide +0.00, - .002" and +/- .001" Depth), MATERIAL: 2124-T8 or 7075-T7 ALUMINUM. SIZE: 1.5"W x 3.75"L... | 8 | |
| AL2024-016-063 | CUSTOM 4 STEP REFERENCE BLOCK. MATERIAL: 2024-T3. STEP SIZE 0.016", 0.032", 0.056", 0.063" +/-.002". PAD SIZE: .787" x .787". Includes Test Report and Certificate of Conformance. | 1 | |
| AL2024-024-125 | CUSTOM 4 STEP REFERENCE BLOCK. MATERIAL: 2024-T3. STEP SIZE 0.024", 0.071", 0.112", 0.125" +/-.002". PAD SIZE: .787" x .787". Includes Test Report and Certificate of Conformance. | 1 | |
| AL35-45 | REFERENECE STANDARD BD-700 PT 6 57-70-001. ALSO IN 53-10-01 PART 6 PAGE 5 FIGURE 1. EDM NOTCHES: .008", .020", .040" ( .005" WIDE +0.00, - .002" AND +/- .001" DEPTH), MATERIAL: 2124-T87075-T7 ALUMINUM. SIZE: 1.5"W X 3.75"L... | 8 | |
| AL7075-016-063 | CUSTOM 4 STEP REFERENCE BLOCK. MATERIAL: 7075-T6. STEP SIZE 0.016", 0.032", 0.056", 0.063" +/-.002". PAD SIZE: .787" x .787". Includes Test Report and Certificate of Conformance. | 1 | |
| AL7075-024-125 | CUSTOM 4 STEP REFERENCE BLOCK. MATERIAL: 7075-T6. STEP SIZE 0.024", 0.071", 0.112", 0.125" +/-.002". PAD SIZE: .787" x .787". Includes Test Report and Certificate of Conformance. | 1 | |
| ALG3H03 | INFLATOR-GAGE,PNEUMATIC TIRE | 1 | |
| ALT45200001 | PMAT2000 | 1 | |
| ALT45200001-PDL | PDL (PMAT2000) FOR NDB | 1 | |
| AM-1686 | PNEUMATIC TIRE DOLLY | 1 | |
| AMP-39-B-53-10-00-00A-31BA-K | REFERENCE STANDARD PER AW139 IETP 33rd Issue. Material: AISI 301-1/4 HARD STEEL, 7075 AL | 1 | |
| AMS2630C Custom | Custom Reference Standard Per SAE AMS2630C. material: Titanium Alloy, Ti6Al4V per AMS-4928R Annealed. Includes 2 EDM Flaws per customer supplied Drawing. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AMT23B-BX | CRIMP TOOL, PNEUMATIC | 1 | |
| ANDT 3019 | BOEING REFERENCE STANDARD 737 PART 6 53-30-16 PAGE 5 FIGURE 1. MATERIAL: 2024-T3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| ANDT-1096AL | 10 STEP REFERENCE BLOCK, .020".030",.040",.050",.063",.071",.080",.090",100",.125" MATERIAL: (7075-T651 ALUMINUM) | 1 | |
| ANDT3004 | BOEING REFERENCE STANDARD 737 Part 6 53-30-12 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| ANDT3006 | BOEING REFERENCE STANDARD 737 Part 6 53-30-14 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| ANDT3019 | BOEING REFERENCE STANDARD 737 Part 6 53-30-16 Page 5 Figure 1. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| ANDT390A | BOEING REFERENCE STANDARD 737 Part 6 53-10-47 Page 10 Figure 4. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| ANDT390B | BOEING REFERENCE STANDARD 737 Part 6 53-10-47 Page 11 Figure 5. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| ANNUALSUPPORTFEE | REQUIRED ANNUAL SUPPORT FEE FOR PMAT XS® KIT P/N PXS-LDS-10 | 1 | |
| AOGFEE | HAZARDOUS MATERIALS PAPERWORK FEE | 1 | |
| AP01618 | ADAPTER, IN-LINE MATING - SMA TO SMA | 1 | |
| AP2017 | PNEUMATIC SPECIAL PURPOSE TOOL | 1 | |
| AP250065 | PNEUMATIC SEALANT GUN | 1 | |
| AP27SA | (MTO)-AUTOMATIC POSITIONER SUB ASSEMBLY | 1 | |
| AP4197-15MYZD-KIT | KIT-SET HOIST PNEUMATIC 7.5 TON | 1 | |
| APB-NDT001 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-02 Page 6 Frigure 2. Material: 7150-T6 (34-39.5% IACS), 7050-T7 (40-44% IACS), and 2324-T3 (29.5-33.5% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes | 1 | |
| APB-NDT003 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-02 Page 9-10 Figure 5. Material: 7150-T6 (34-39.5% IACS), 7050-T7 (40-44% IACS), and 2324-T3 (29.5-33.5% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Include | 1 | |
| APB-NDT004 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-01 Page 5-6 Figure 2. Material: 7150-T6 (34-39.5% IACS), 7050-T7 (40-44% IACS), and 2324-T3 (29.5-33.5% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Include | 1 | |
| APB-NDT005 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-02 Page 13-14. Figure 7. Material: 7150-T6 (34-39.5% IACS), 7050-T7 (40-44% IACS), and 2324-T3 (29.5-33.5% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Inclu | 1 | |
| APB-NDT006 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-53 Page 5-6 Figure 2. Material: 7075-T7 (40-44% IACS), 2324-T3 (29.5-33.5% IACS), and 2224-T3 (29.5-33.5% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Inclu | 2 | |
| APB-NDT007 | BOEING-AVIATION PARTNERS REFERENCE STANDATD 767 Part 6 57-20-09 Page 7-8 Figure 2. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certi | 1 | |
| APB-NDT008 | BOEING-AVIATION PARTNERS REFERENCE STANDATD 767 Part 6 57-20-09 Page 1-2 Figure 4. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certi | 1 | |
| APB-NDT009 | BOEING-AVIATION PARTNERS REFERENCE STANDATD 767 Part 6 57-20-09 Page 5-6 Figure 6.Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certif | 1 | |
| APB-NDT010 | BOEING-AVIATION PARTNERS REFERENCE STANDATD 767 Part 6 57-20-09 Page 8-9 Figure 8. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certi | 1 | |
| APB-NDT011A | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-08 Page 8-9 Figure 3. Material: 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT011B | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-08 Page 11-12 Figure 5. Material: 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT011C | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-08 Page 14-15 Figure 7. Material: 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT011D | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-08 Page 17-18 Figure 9. Material: 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT012 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 4 57-20-03 Page 8 Figure 3. Material: 2224-T3 or 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT013 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 4 57-20-03 Page 10 Figure 4. Material: 2224-T3 or 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT014 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 4 57-20-03 Page 12 Figure 5. Material: 2224-T3 or 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT015 | BOEING AVIATION PARTNERS REFERENCE STANDARD 767 Part 6 57-20-09 Page 21-22 Figure 10. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Ce | 2 | |
| APB-NDT016 | BOEING AVIATION PARTNERS REFERENCE STANDARD 767 Part 6 57-50-09 Page 24-25. Figure 12 Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Ce | 1 | |
| APB-NDT3301 | AVIATION PARTNERS BOEING REFERENCE STANDARD 737 Part 6 57-20-34 Page 7-8 Figure 2. Material: 2024-T3 (28.5-32% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT3302 | AVIATION PARTNERS BOEING REFERENCE STANDARD 737 Part 6 57-20-35 Page 6 Figure 2. Material: 2024-T3, 7050-T7 (40-44% IACS), and 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT5201 | AVIATION PARTNERS BOEING 757 Part 6 57-20-01 Page 23-24 Figure 10. Material: 7075-T7 and 2324 (29.5-33.5% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 2 | |
| APB-NDT5202 | AVIATION PARTNERS BOEING 757 Part 6 57-20-01 Page 19-20 Figure 8. Material: 7050-T7 and 2324 (29.5-33.5% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 2 | |
| APB-NDT5203 | AVIATION PARTNERS REFERENCE STANDARD 737 Part 6 57-20-02 Page 7-8 Figure 2. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate | 2 | |
| APB-NDT5204 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-02 Page 11-12 Figure 4. Material: 2224-T3 and 2324-T3 or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 2 | |
| APB-NDT5205 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-02 Page 15-16 Figure 6. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Cer | 2 | |
| APB-NDT5206 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-03 Page 8-9 Figure 2. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certi | 2 | |
| APB-NDT5207 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-03 Page 12-13 Figure 4. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Cer | 2 | |
| APB-NDT5208 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-03 Page 16-17 Figure 6. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Cer | 2 | |
| APB-NDT5209 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 4 57-20-03 Page 9 Figure 2. Material: Airplane Quality Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT5301 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-01 Page 15-16 Figure 6. Material: 7050-T7 (40-44% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT5302 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-01 Page 11-12 Figure 4. Material: 7050-T7 (40-44% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT5303 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-01 Page 7-8 Figure 2. Material: 7050-T7 (40-44% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APC191SS | TOOL, MINI PNEUMATIC, CLOSE TOL. | 1 | |
| APMOD | Automatic Positioner Module (APMOD) | 1 | |
| APT321 | RANDOM ORBIT SANDER - ASTRO PNEUMATIC | 1 | |
| APV-2 | AIR MOVER, PNEUMATIC 8 INCH | 1 | |
| AQPC8 | PLIERS;|PLIER COMBINATION MATADOR GERMANY; | 1 | |
| ARP | C-130 CALIBRATION STANDARD. MATERIAL:7075-T6 ALUMINUM 5 PIECE STACK. FASTENER (HLT114-6-8 NUT P/N: KFN542-3) 6 PLACES. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| ARS-123/TI | EDDY CURRENT SURFACE REFERENCE STANDARD. MATERIAL: TI-6AL-6V-2SN. SIZE: 2.0" LONG x 1.0" WIDE. EDM NOTCH .040" DEEP +/- .002" x .005" WIDE +/- .001". Includes Test Report and Certificate of Conformance. | 1 | |
| AS5230W0606 | PNEUMATIC LEAK CHECK, NIPPLE | 1 | |
| ASDP-.250/1-10KHZ | LOW FREQUENCY DIFFERENTIAL SPOT PROBE RIGHT ANGLE, .250"Ø O.D. 1-10KHz TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformation. | 1 | |
| ASDP-.3-2K-1 | LOW FREQUENCY DIFFERENTIAL SPOT PROBE RIGHT ANGLE, .320"Ø O.D. 1-10KHz TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformation. | 1 | |
| ASE-WSNDT | CUSTOM SURFACE CALIBRATION BLOCK. MATERIAL: 7075-T73 ALUMINUM. EDM NOTCH SIZE: 1.52mm(.060") LONG x 0.13mm(.0051") WIDE x 0.76mm(.030") DEEP. +/- .05mm. Includes Test Report and Certificate of Conformance. | 1 | |
| ASHT-01-10 | PNEUMATIC BENCH VISE | 1 | |
| ASP-244 | ASP Pneumatic Puller Set (244 Huckgun/99-2642 head) | 1 | |
| ASU-180PPM | TOOL-UNIT TESTS AERO PNEUMATIC SYS | 1 | |
| ASU-600-100-CUP | PNEUMATIC START UNIT, DIESEL | 1 | |
| ASU-600-180-CUP | START UNIT, PNEUMATIC | 1 | |
| ASU-600-180-DDP | START UNIT, PNEUMAT-IC | 1 | |
| AT1070A | MOTOTOOL NEUMATICO PARA ACCESORIOS | 2 | |
| AT1300A | WRNCH, IMPACT, PNEUMATIC | 1 | |
| AT145B | MARTEAU PNEUMATIQUE | 1 | |
| AT185 | PNEUMATIC DUAL PUNCH | 1 | |
| AT192A | PNEUMATIC SHAW/FILE | 2 | |
| AT200D | WRENCH RATCHET PNEUMATIC | 4 | |
| AT203 | WRETCH, RATCHET, PNEUMATIC | 1 | |
| AT235MCA | WRENCH,IMPACT,PNEUMATIC | 2 | |
| AT365 | PISTOLA NEUMATICA (LLAVE DE IMPACTO) | 1 | |
| AT50668 | CLIP-ARMATURE | 1 | |
| AT520CTK | Swaging Pull Tester Kit, Pneumatic | 7 | |
| AT520JK | Swaging Kit, Pneumatic | 7 | |
| AT560 | PISTOLA NEUMATICA (LLAVE DE IMPACTO) | 1 | |
| AT560M | PNEUMATIC DUST COLLECTOR | 3 | |
| AT560VB | PNEUMATIC VACUUM CLEANER- PLASTIC | 1 | |
| AT590L | SHAVER,RIVET HEAD,PORTABLE,PNEUMATIC | 2 | |
| AT670 | WRENCH,IMPACT,PNEUMATIC;SUPER DUTY 3/4" DRIVE (300-850 FT.LB) | 1 | |
| AT760 | WRENCH,IMPACT,PNEUMATIC;SUPER DUTY 3/4" DRIVE (300-850 FT.LB) | 1 | |
| AT811 | DRILL,PNEUMATIC,POR | 1 | |
| ATA3600-4 | PNEUMATIC DUCT FLANGE REFORM TOOL | 1 | |
| ATI100A71/4A | RIVET SET, PNEUMATIC TOOL | 1 | |
| ATI100A73/16 | RIVET SET, PNEUMATIC TOOL | 1 | |
| ATI100A75/32 | RIVET SET, PNEUMATIC TOOL | 1 | |
| ATI101A3-1/4 | RIVET SET, PNEUMATIC TOOL | 1 | |
| ATI114TC | PNEUMATIC RIV-C YOKE-1-1/2 TAN | 1 | |
| ATI520JK | PNEUMATIC PORTABLE CABLE SWAGER KIT | 5 | |
| ATI560M | PNEUMATIC DUST COLLECTOR | 2 | |
| ATI560MF12 | PNEUMATIC VACUUM POWER WITH FLEXIBLE HOSE 12 | 3 | |
| ATI560MF24 | MINA-VACS PNEUMATIC | 2 | |
| ATIATC3X | PNEUMATIC HAMMER, PISTOL TYPE, 3X | 1 | |
| ATIG747 | PNEUMATIC RIVETER | 1 | |
| ATIU-114A-3 | PNEUMATIC RIV-A YOKE-3IN SGL | 1 | |
| ATIU-114TA | PNEUMATIC RIV-A YOKE-1-1/2 TAN | 1 | |
| ATIU114A | PNEUMATIC RIV-A YOKE-1-1/2 SGL | 1 | |
| ATIU114A214 | PNEUMATIC RIV-A YOKE-2-1/4 SGL | 1 | |
| ATIU114C | PNEUMATIC RIV-C YOKE-1-1/2 SGL | 1 | |
| ATIU114TA-3 | PNEUMATIC RIV-A YOKE-3IN TAN | 1 | |
| ATIU114TA214 | PNEUMATIC RIV-A YOKE-2-1/4 TAN | 1 | |
| ATO-3GP | PNEUMATIC GREASE PUMP 3 GALLON | 1 | |
| ATS-114CK | ATS PRO PNEUMATIC "C" SQUEEZER KIT | 1 | |
| ATS-270A | Sioux Tool 270A Pneumatic Rivet Gun | 1 | |
| AURFBSE-5.5M/40MWL | STANDARD UNIVERSAL EXPANDABLE FLAT BOTTOM ROTARY EDGE PROBE ( CENTERED COIL ) , 4 PIN FISCHER CONNECTOR 40mm(1.57") WORKING LENGTH 100KHZ-2MHZ. EXPANDABLE PROBE HEAD DIAMETER= 5.5mm(0.2165Ø - APPROXIMATELY 6.91mmØ 0.272"Ø. Includes Test Report and C... | 1 | |
| AV1-55 EX W | PNEUMATIC VACUUM | 1 | |
| AV1000A | PNEUMATIC VACUM CLEANER | 2 | |
| AV116H | BOMBA A VACUO PARA TESTE PNEUMATICO EM COMPONENTES DA AERONAVE - MANUAL | 1 | |
| AVC13 | PNEUMATIC RIVET GUN, 1/4" RIVETS | 2 | |
| AVC13A1 | PNEUMATIC RIVET GUN, 1/4" RIVETS | 3 | |
| AVEE001 | SMARTSCAN-FA, KAVEE001,OTHER PN REGARDING AUTOMATIC WHEEL INSPECTION | 1 | |
| AZL01377-R00 | TRICICLO PARA TRANSPORTE DE MATERIAIS DE CONSTRUC?O - GSE | 1 | |
| AZL03819-R00 | TAMPAO DUTO PNEUMATICO HPV - A330 | 1 | |
| AZL0552-R00 | TEST SET - PNEUMATIC SYSTEM | 1 | |
| AccuTAP | ACCUTAP AUTOMATED TAP TESTER | 1 | |
| Agilent E7401A | 1.5 GHz Spectrum Analyzer w/ automated EMI measurements | 1 | |
| B21005-1 | CLEANING WAND EQPT - HEAT EXCHANGER, PNEUMATIC CLEANER | 5 | |
| B21005-10 | CLEANING WAND EQPT - HEATEXCHANGER, PNEUMATIC | 10 | |
| B26004-1 | TEST BOX - AUTOMATIC FIRE/OVERHEAT LOGIC TEST SYSTEM (AFOLTS) PRINTED CIRCUIT ASSEMBLY (PCA) | 1 | |
| B32049-6 | LEVERAGE EQUPT. - INST/REM, PNEUMATIC DUCT ENG. STRUT | 5 | |
| B350-003 | COCKPIT COVER, "blackout" material | 1 | |
| B350-101 | ENGINE/OIL COOLER INLET PLUGS, winterized materials (set of 4) | 1 | |
| B350-151 | PROP TIE-DOWNS/EXHAUST COVERS, EXHAUST BASE VENT PLUGS, winterized materials (set of 10) | 1 | |
| B36-001 | BANCO PRUEBAS ITCAN NEUMÁTICAS ( KIT 302 ) | 1 | |
| B36003 | LEVERAGE EQPT -0 INSTL & REMOVAL, PNEUMATIC | 1 | |
| B36003-1 | LEVERAGE EQUIPMENT - INSTALLATION/REMOVAL, PNEUMATIC DUCT, ENGINE STRUT | 12 | |
| B71019 | REFERENCE INFORMATION - RB211-535 ENGINE HANDLING EQUIPMENT | 1 | |
| BA-269C5 | MATERIAL THICKNESS&GRIP GAUGE | 1 | |
| BA24320A-1 | AUTOMATIC FE36 FIRE EXTINGUISHER is a direct replacement for BA21758 | 6 | |
| BAS40001 | EDGEMATE CARBIDE SHARPNER | 1 | |
| BAT-109 | Pneumatic Spring Cleco Tool | 1 | |
| BAT-8HTC-5 | Thread Clipper for Kevlar® & Composite Materials - MADE IN THE USA! | 1 | |
| BAT-DAG093 | SOLID CARBIDE DAGGER DRILL 3/32" (.0938) -For Composite Materials | 1 | |
| BAT-DAG098 | SOLID CARBIDE DAGGER DRILL #40 (.0980) -For Composite Materials | 1 | |
| BAT-DAG125 | SOLID CARBIDE DAGGER DRILL 1/8" (.1250) -For Composite Materials | 1 | |
| BAT-DAG128 | SOLID CARBIDE DAGGER DRILL #30 (.1285) -For Composite Materials | 1 | |
| BAT-DAG156 | SOLID CARBIDE DAGGER DRILL 5/32" (.1562) -For Composite Materials | 1 | |
| BAT-DAG159 | SOLID CARBIDE DAGGER DRILL #21 (.1590) -For Composite Materials | 1 | |
| BAT-DAG161 | SOLID CARBIDE DAGGER DRILL #20 (.1610) -For Composite Materials | 1 | |
| BAT-DAG177 | SOLID CARBIDE DAGGER DRILL #16 (.1770) -For Composite Materials | 1 | |
| BAT-DAG185 | SOLID CARBIDE DAGGER DRILL #13 (.1850) -For Composite Materials | 1 | |
| BAT-DAG187 | SOLID CARBIDE DAGGER DRILL 3/16" (.1875) -For Composite Materials | 1 | |
| BAT-DAG193 | SOLID CARBIDE DAGGER DRILL #10 (.1935) -For Composite Materials | 1 | |
| BAT-DAG199 | SOLID CARBIDE DAGGER DRILL #8 (.1990) -For Composite Materials | 1 | |
| BAT-DAG204 | SOLID CARBIDE DAGGER DRILL #6 (.2040) -For Composite Materials | 1 | |
| BAT-DAG246 | SOLID CARBIDE DAGGER DRILL"D" (.2460) -For Composite Materials | 1 | |
| BAT-DAG250 | SOLID CARBIDE DAGGER DRILL 1/4" (.2500) -For Composite Materials | 1 | |
| BAT-DAG312 | SOLID CARBIDE DAGGER DRILL 5/16" (.3125) -For Composite Materials | 1 | |
| BAT-DAG375 | SOLID CARBIDE DAGGER DRILL 3/8" (.3750) -For Composite Materials | 1 | |
| BAT-HKAIR | 1/4” DRIVE PNEUMATIC AIR HI-LOK RATCHET | 2 | |
| BAUER MODEL 8621 | BEAD BREAKER, AUTOMATIC SPADE ADJUSTMENT | 1 | |
| BB5020SHM020 | ATEC 2 Avionics Automate Test Equipment / ATE | 1 | |
| BCIT-150 | TIRE COVERS (no wheelpant faring) (specify material type) (set of 2) | 1 | |
| BCIT-510 | MAIN GEAR WHEELPANT COVERS (specify material type) (set of 2) | 1 | |
| BDEC-500 | MAIN GEAR WHEELPANT COVERS (specify material type) (set of 2) | 1 | |
| BELT SANDER PNEUMATIC | BELT SANDER PNEUMATIC, NORDBERG, NP4155 | 1 | |
| BH7475-T7351 | CALIBRATION STANDARD, BOMBARDIER CHALLENGER 604, 53-21-00 FIG 602. MATERIAL: 7475-T7 ALUMINUM. Includes Test Report and Certificate of Conformance. | 4 | |
| BI447 | Starrett 18AA AUTOMATIC CENTRE PUNCH | 1 | |
| BI452 | Starrett 18A AUTOMATIC CENTRE PUNCH | 1 | |
| BI457 | Starrett 18B AUTOMATIC CENTRE PUNCH | 1 | |
| BI462 | Starrett 18C AUTOMATIC CENTRE PUNCH | 1 | |
| BLA019 | PYLON, PNEUMATIC SYSTEM BLA019-1,-2 | 1 | |
| BLPES668 | AUTOMATIC WIRE STRIPPER/CRIMPE | 1 | |
| BLPSDHR10A | PNEUMATIC HOSE REEL 25 | 1 | |
| BLW1240 | MATTING - FUEL TANK/WING UPPER SURFACE | 1 | |
| BM22S | CAPACITY ANALYZER-AUTOMATIC EQUALIZER | 1 | |
| BMS5-95 | SEALANT - PRESSURE AND ENVIRONMENTAL - CHROMATE TYPE | 1 | |
| BONDERITE-M-CR1200 | ONE COMPONENT CHROMATING | 1 | |
| BP-738K | BLUE PNEUMATIC R AND D HAND TOOL KIT BP-738K | 1 | |
| BP-738K-STD | BLUE PNEUMATIC R AND D HAND TOOL KIT BP-738K | 1 | |
| BRON-M-232X | Cyclone Pneumatic Paint Shaker | 1 | |
| BU762 | Starrett 173MAT TAPER THICKNESS GAUGE | 1 | |
| BV-101-P | PNEUMATIC BENCHVISE | 1 | |
| C-130 FIXTURE | Custom C-130 Blade Inside Bushing Probe Fixture per Drawing No. 201757983. Material: ABS Plastic machined not 3D Printed. | 1 | |
| C-22-P-3300 | PNEUMATIC GUN | 1 | |
| C13/C33 | PEMCO REPAIR COUPON #25 FIGURE 2. MATERIAL: 2024-T3 CLAD ALUMINUM. RIVETS: MS20426DD6. EDM NOTCH LENGTH: .26"(.66mm) and .280"(.71mm) BOTH SIDES OF FASTENER HOLE. Includes Test Report and Certificate of Conformance. | 2 | |
| C130-CW-012 | C-130 CALIBRATION STANDARD. MATERIAL:7075-T6 ALUMINUM 5 PIECE STACK. FASTENER (HLT114-6-8 + NUT P/N: KFN542-3) 6 PLACES. Includes Test Report and Certificate of Conformance. | 2 | |
| C130-CW-013 | C-130 CALIBRATION STANDARD. MATERIAL:7075-T6 ALUMINUM 5 PIECE STACK. FASTENER (HLT114-6-8 + NUT P/N: KFN542-3) 6 PLACES. Includes Test Report and Certificate of Conformance. | 2 | |
| C130-CWOW-019 | LOCKHEED C-130 CALIBRATION STANDARD LOWER SURFACE PANEL. MATERIAL: 7075-T6 ALUMINUM | 1 | |
| C130-OW-016 | LOCKHEED C-130 CALIBRATION STANDARD FIGURE 9-4 No.1 and No. 4 Truss Mount Upper Lugs. Material: 7075-T6 Aluminum Sulfuric Acid Anodized Per MIL-A-8625 or Equivalent. Includes Test Report and Certificate of Conformance. | 2 | |
| C130-OW-017 | C-130 CALIBRATION STANDARD. MATERIAL:7075-T6 ALUMINUM 5 PIECE STACK. FASTENER (HLT114-6-8 NUT P/N: KFN542-3) 6 PLACES. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| C130-OW016 | LOCKHEED C-130 CALIBRATION STANDARD FIGURE 9-4 NO.1 AND NO. 4 TRUSS MOUNT UPPER LUGS. MATERIAL: 7075-T6 ALUMINUM SULFURIC ACID ANODIZED PER MIL-A-8625EQUIVALENT. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| C130-UT-17-1 | C-130 CALIBRATION STEP STANDARD. MATERIAL:7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| C205-120 | WHEEL COVERS (no wheelpant faring) (specify material type) (set of 3) | 1 | |
| C21003-135 | PNEUMATIC HOSE | 13 | |
| C29002-23 | Schematic/Usage Placard | 1 | |
| C3/C29 | PEMCO REPAIR COUPON #25 FIGURE 2. MATERIAL: 2024-T3 CLAD ALUMINUM. RIVETS: MS20426DD6. EDM NOTCH LENGTH: .125"(.031mm) and .180"(.45mm) BOTH SIDES OF FASTENER HOLE. Includes Test Report and Certificate of Conformance. | 2 | |
| C300 | ACER TRAVEL MATE TABLET PC | 1 | |
| C34001 | Adapter Assembly -Smiths (Lear-Siegler) Flight Management Computer (Fmc)/Control Display Unit (Cdu). Boeing Automatic Test Station (Ats). | 1 | |
| C34011 | Adapter Equipment -Honeywell Mode Control Panel (Mcp) And Flight Control Computer (Fcc) To Boeing Automatic Test Station (Ats-182) | 1 | |
| C350-130 | NOSE WHEELPANT/STRUT COVER (specify material type) | 1 | |
| C36001-63 | WING PNEUMATIC COMPONENTS | 12 | |
| C36001-64 | PNEUMATIC TEST KIT 737NG | 17 | |
| C4G4342 | PROTECTIVE WORK MATS (NOSE COWL) | 1 | |
| C52005-1 | Fixture Equipment - Automatic Overwing Exit Door Spring | 4 | |
| C52007-1 | Torque Wrench Adapter Equipment - Automatic Overwing Exit Hatch | 12 | |
| C52007-8 | Torque wrench adapter eqpt automatic overwing exit hatch | 2 | |
| C82907-00 | VACUUM - ULPA, HAZARDOUS MATERIAL | 1 | |
| CA03-3-C-0000-9 | AIR FLOW (6-60 PPM) OF PNEUMATIC HEAT EXCHANGER | 1 | |
| CA1010 | COMPOUND - JOINTING, CORROSION INHIBITING, CHROMAT | 1 | |
| CAABGE320500ZZZ066ZD | COMPLEMENTARY KIT FOR THE NEUMATICAL CAR | 1 | |
| CALBLK-STEP-102 | 5 STEP BLOCK, MATERIAL MILD STEEL (S355J0) | 1 | |
| CAT-HT-169-1620-11 | SAMTEC POWER MATE | 1 | |
| CB-LM-532048 | REFERENCE BLOCK FIGURE 5. MATERIAL: 2024-T351 ALUMINUM WITH PRIMER. EDM NOTCH: 3mm X 3mm X .15mm ± .05mm. Includes Test Report and Certificate of Conformance. | 2 | |
| CD-6 | BENDER PNEUMATIC HPC | 1 | |
| CD-8"C | DIGIMATIC CALIPER | 1 | |
| CD-8"CX | DIGIMATIC CALIPER | 1 | |
| CE1331699-003 | 8 STEP THICKNESS CALIBRATION STANDARD. STEP SIZES: .025", .030", .035", .040", .045", .055", .060", .068" +/-.001". PAD SIZE 1.0" x 1.25" TYP. MATERIAL: 7475-T7351 ALUMINUM, CHROMIC ACID ANODIZED. Includes Test Report and Certificate of Conformance. | 1 | |
| CE1617528 | CALIBRATION STANDARD, BOMBARDIER TEST REFERENCE ULTRA SONIC NDI. MATERIAL: 7475-T7351 and 7040-T7451 ALUMINUM. MS90254U0805D FASTENERS. Includes Test Report and Certificate of Conformance. | 1 | |
| CE1617529 | CALIBRATION STANDARD, BOMBARDIER TEST REFERENCE ULTRA SONIC NDI. MATERIAL: 7475-T7351 and 7040-T7451 ALUMINUM. MS90254U0805D FASTENERS. Includes Test Report and Certificate of Conformance. | 1 | |
| CE4-1002 | BENDER PNEUMATIC HPC | 1 | |
| CE4-1027 | BENDER PNEUMATIC HPC | 1 | |
| CE4-1034 | BENDER PNEUMATIC HPC | 1 | |
| CE4-1035-3A | BENDER PNEUMATIC HPC | 1 | |
| CE4-1036 | BENDER PNEUMATIC HPC | 1 | |
| CFM56 9970-958-579 | EDDY CURRENT SURFACE REFERENCE BLOCK. 2 EDM NOTCHES .012" Deep x .004" Wide and .020" Deep x .004" Wide. Tolerance on Width (.004" W +/- .002"), Material: Inconel 600 Series. Reference: CFM56-5B S/B 72-0620 PAGE 14. Includes Test Report and Certificate | 2 | |
| CG9000032-0001 | Escape Slide Protection Mats | 1 | |
| CHERRYLOCK-GUN | PNEUMATIC CHERRYLOCK GUN TOOL | 1 | |
| CHERRYLOCK-HEAD-UNI | PNEUMATIC CHERRYLOCK HEAD UNIVERSAL | 1 | |
| CM3574B150A | FLEX HOSE APPROXIMATELY 15 FEET (4.57 M) IN LENGTH. | 1 | |
| CM3574D3600 | FLEX HOSE APPROXIMATELY 30 FEET (9.14 M) IN LENGTH. | 1 | |
| COM-12461 | EFB CABLE ADAPTER FOR PMAT | 1 | |
| COM-13770 | PNEUMATIC TEST KIT | 1 | |
| COM-14803 | ENGINE PNEUMATIC TEST KIT | 1 | |
| COM-173 | NUTRUNNER-ANGLE,PNEUMATIC DRIVE | 1 | |
| COM-4747 | PNEUMATIC SCRAPER SHARPENER | 1 | |
| CP-0214-ENBEL | RIVETER,JAM,PNEUMATIC | 2 | |
| CP-0351-ESGEL | RIVETER, YOKE, PNEUMATIC | 3 | |
| CP-4284 | CHICAGO PNEUMATIC 4X RIVET GUN | 2 | |
| CP-4444-RUSAB | CHICAGO PNEUMATIC 3X RIVET GUN | 3 | |
| CP-4444-RUTAB | CHICAGO PNEUMATIC 4X RIVET GUN | 4 | |
| CP-450EA | CHICAGO PNEUMATIC COMPRES. RIVETER | 1 | |
| CP-9289-9 | DRILL - 900 RPM (3/8 SIZE) (CHICAGO PNEUMATIC TOOL CO) | 1 | |
| CP-BB9420 | CHICAGO PNEUMATIC Vibration-Reduced Bucking Bar - Save Your Hands! | 1 | |
| CP.789 HR | PNEUMATIC DRILL | 1 | |
| CP0214ANBEL | Chicago Pneumatic® Alligator Yoke Riveters (Capacity (aluminum-steel): 1/8" - 3/32") (Closed yoke height: 7.8") (Overall length: 9-3/16" (23 cm)) (Reach: 1-1/2") (Type: Single Cylinder) (Add to cart: Add To Cart) | 1 | |
| CP0214ANFEL | Chicago Pneumatic® Alligator Yoke Riveters (Capacity (aluminum-steel): 1/8" - 3/32") (Closed yoke height: 7.8") (Overall length: 9-3/16" (23 cm)) (Reach: 1-1/2") (Type: Single Cylinder) (Add to cart: Add To Cart) (Capacity (aluminum-steel): 1/8" - 3/32") | 3 | |
| CP0214ANGEL | Chicago Pneumatic® Alligator Yoke Riveters (Capacity (aluminum-steel): 1/8" - 3/32") (Closed yoke height: 7.8") (Overall length: 9-3/16" (23 cm)) (Reach: 1-1/2") (Type: Single Cylinder) (Add to cart: Add To Cart) (Capacity (aluminum-steel): 1/8" - 3/32") | 1 | |
| CP0214CELEL | Chicago Pneumatic® C-Yoke Riveter (Type: Single Cylinder) (Force: 3000 lbs) (Capacity: 1/8" Alum. 3/32" Steel) (Overall length: 10-5/16" (26.2 cm)) (Add to cart: Add To Cart) | 2 | |
| CP0214ENBEL | Chicago Pneumatic® Alligator Yoke Riveters (Capacity (aluminum-steel): 1/8" - 3/32") (Closed yoke height: 7.8") (Overall length: 9-3/16" (23 cm)) (Reach: 1-1/2") (Type: Single Cylinder) (Add to cart: Add To Cart) (Capacity (aluminum-steel): 1/8" - 3/32") | 2 | |
| CP0214ENFEL | Chicago Pneumatic® Alligator Yoke Riveters (Capacity (aluminum-steel): 1/8" - 3/32") (Closed yoke height: 7.8") (Overall length: 9-3/16" (23 cm)) (Reach: 1-1/2") (Type: Single Cylinder) (Add to cart: Add To Cart) (Capacity (aluminum-steel): 1/8" - 3/32") | 1 | |
| CP0214ENGEL | Chicago Pneumatic® Alligator Yoke Riveters (Capacity (aluminum-steel): 1/8" - 3/32") (Closed yoke height: 7.8") (Overall length: 9-3/16" (23 cm)) (Reach: 1-1/2") (Type: Single Cylinder) (Add to cart: Add To Cart) (Capacity (aluminum-steel): 1/8" - 3/32") | 1 | |
| CP0214FALEL | Chicago Pneumatic® C-Yoke Riveter (Type: Single Cylinder) (Force: 3000 lbs) (Capacity: 1/8" Alum. 3/32" Steel) (Overall length: 10-5/16" (26.2 cm)) (Add to cart: Add To Cart) (Type: Tandem Cylinder) (Force: 6000 lbs) (Capacity: 3/16" Alum. 5/32" Steel) (O | 1 | |
| CP0341CUDEL | CHICAGO PNEUMATIC Hi-Force SWIVEL "C" Yoke Rivet Squeezer with 2-1/8" Reach Jaws | 1 | |
| CP0351ASGEL | Chicago Pneumatic® Heavy-Duty Alligator Yoke Riveters (Capacity (aluminum-steel): 5/32" - 1/8") (Closed yoke height: 7/8") (Overall length: 19-1/2" (50 cm)) (Reach: 2-7/8") (Type: Single Cylinder) (Add to cart: Add To Cart) | 1 | |
| CP0351ASKEL | Chicago Pneumatic® Heavy-Duty Alligator Yoke Riveters (Capacity (aluminum-steel): 5/32" - 1/8") (Closed yoke height: 7/8") (Overall length: 19-1/2" (50 cm)) (Reach: 2-7/8") (Type: Single Cylinder) (Add to cart: Add To Cart) (Capacity (aluminum-steel): 1/8 | 1 | |
| CP0351ASVEL | Chicago Pneumatic® Heavy-Duty Alligator Yoke Riveters (Capacity (aluminum-steel): 5/32" - 1/8") (Closed yoke height: 7/8") (Overall length: 19-1/2" (50 cm)) (Reach: 2-7/8") (Type: Single Cylinder) (Add to cart: Add To Cart) (Capacity (aluminum-steel): 1/8 | 1 | |
| CP0351CUDEL | Chicago Pneumatic® C-Yoke Riveters (Capacity (aluminum-steel): 3/16" - 5/32") (Closed yoke height: 25/32") (Overall length: 17-1/2" (45 cm)) (Reach: 2-1/8") (Type: Single Cylinder) (Add to cart: Add To Cart) | 1 | |
| CP0351ESGEL | CHICAGO PNEUMATIC Hi-Force "Alligator" Rivet Squeezer with 2-7/8" Reach Jaws | 3 | |
| CP0351ESKEL | CHICAGO PNEUMATIC Hi-Force "Alligator" Rivet Squeezer with 5" Reach Jaws | 2 | |
| CP0351ESREL | CHICAGO PNEUMATIC Hi-Force "Alligator" Rivet Squeezer with 7" Reach Jaws | 3 | |
| CP0351ESVEL | CHICAGO PNEUMATIC Hi-Force "Alligator" Rivet Squeezer with 9-1/8" Reach Jaws | 3 | |
| CP0351FUDEL | CHICAGO PNEUMATIC Hi-Force "C" Rivet Squeezer with 2-1/8" Reach Jaws | 2 | |
| CP1014P05 | Chicago Pneumatic® Air Drills (Capacity: 3/8") (Rpm: 500) (Overall length: 7-3/4" (216 mm)) (Add to cart: Add To Cart) | 1 | |
| CP1014P24 | Chicago Pneumatic 2400 RPM Mini Palm Drill | 2 | |
| CP1014P33 | Chicago Pneumatic 3300 RPM Mini Palm Drill | 1 | |
| CP1014P45 | Chicago Pneumatic 4500 RPM Mini Palm Drill | 2 | |
| CP1117P32 | Chicago Pneumatic 3/8" Drill - 1 Horse Power - 3200 RPM | 1 | |
| CP1117P60 | Chicago Pneumatic 3/8" Drill - 1 Horse Power - 6000 RPM | 1 | |
| CP3008LA1250-100JAANDC94339 | PNEUMATIC DRILL 3/8 | 1 | |
| CP3019-18 | Chicago Pneumatic® Die Grinder (Rpm: 18000) (Overall length: 6-5/8" (169 mm)) (Add to cart: Add To Cart) | 1 | |
| CP3019-20 | Chicago Pneumatic® Die Grinder (Rpm: 18000) (Overall length: 6-5/8" (169 mm)) (Add to cart: Add To Cart) (Rpm: 20,000) (Overall length: 6-5/8" (169 mm)) (Add to cart: Add To Cart) | 1 | |
| CP3019-20AC | PNEUMATIC DIE GRINDER | 2 | |
| CP3019-20ES | Chicago Pneumatic® Extension Die Grinder (Rpm: 20,000) (Overall length: 9-7/8" (249 mm)) (Add to cart: Add To Cart) | 1 | |
| CP3019-25 | Chicago Pneumatic® Die Grinder (Rpm: 18000) (Overall length: 6-5/8" (169 mm)) (Add to cart: Add To Cart) (Rpm: 20,000) (Overall length: 6-5/8" (169 mm)) (Add to cart: Add To Cart) (Rpm: 25000) (Overall length: 6-5/8" (169 mm)) (Add to cart: Add To Cart) | 1 | |
| CP3019-25ES | Chicago Pneumatic® Extension Die Grinder (Rpm: 20,000) (Overall length: 9-7/8" (249 mm)) (Add to cart: Add To Cart) (Rpm: 25000) (Overall length: 9-7/8" (249 mm)) (Add to cart: Add To Cart) | 1 | |
| CP3019-31 | Chicago Pneumatic® Die Grinder (Rpm: 18000) (Overall length: 6-5/8" (169 mm)) (Add to cart: Add To Cart) (Rpm: 20,000) (Overall length: 6-5/8" (169 mm)) (Add to cart: Add To Cart) (Rpm: 25000) (Overall length: 6-5/8" (169 mm)) (Add to cart: Add To Cart) ( | 1 | |
| CP3019-31ES | Chicago Pneumatic® Extension Die Grinder (Rpm: 20,000) (Overall length: 9-7/8" (249 mm)) (Add to cart: Add To Cart) (Rpm: 25000) (Overall length: 9-7/8" (249 mm)) (Add to cart: Add To Cart) (Rpm: 31000) (Overall length: 9-7/8" (249 mm)) (Add to cart: Add | 1 | |
| CP3019-40 | Chicago Pneumatic® Die Grinder (Rpm: 18000) (Overall length: 6-5/8" (169 mm)) (Add to cart: Add To Cart) (Rpm: 20,000) (Overall length: 6-5/8" (169 mm)) (Add to cart: Add To Cart) (Rpm: 25000) (Overall length: 6-5/8" (169 mm)) (Add to cart: Add To Cart) ( | 1 | |
| CP3019-40ES | Chicago Pneumatic® Extension Die Grinder (Rpm: 20,000) (Overall length: 9-7/8" (249 mm)) (Add to cart: Add To Cart) (Rpm: 25000) (Overall length: 9-7/8" (249 mm)) (Add to cart: Add To Cart) (Rpm: 31000) (Overall length: 9-7/8" (249 mm)) (Add to cart: Add | 1 | |
| CP30445-1 | Beam, sling short lift bar, part of the skateboards, need to match in quantity | 1 | |
| CP3109-28 | STRAIGHT DIE GRINDER (PMEUMATIC) | 1 | |
| CP4220CS | CHICAGO PNEUMATIC | 1 | |
| CP4283 | CHICAGO PNEUMATIC 3X Rivet Gun | 1 | |
| CP4284 | CHICAGO PNEUMATIC 4X Rivet Gun | 2 | |
| CP4285 | CHICAGO PNEUMATIC Big Bore 5X Rivet Gun - .498 Shank | 1 | |
| CP4287 | PNEUMATIC RIVET HAMMER TYPE 7X | 1 | |
| CP4289 | PNEUMATIC RIVET HAMMER TYPE 9X | 1 | |
| CP4444-RUSAB | CHICAGO PNEUMATIC/DESOUTTER 3X RIVET GUN | 3 | |
| CP4444-RUTAB | Chicago Pneumatic 4X Rivet Gun | 4 | |
| CP4444RURAB | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) | 2 | |
| CP4444RUSAB | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 3 | |
| CP4444RUTAB | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 4 | |
| CP4447RUSAB | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 1 | |
| CP4447RUTAB | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 1 | |
| CP4447RUVAB | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 1 | |
| CP4450-2 | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 1 | |
| CP4450-3 | Chicago Pneumatic/ Desoutter 3X Ergonomic Recoiless Rivet Gun | 2 | |
| CP4450-4 | Chicago Pneumatic/ Desoutter 4X Ergonomic Recoiless Rivet Gun | 4 | |
| CP4450-S-2 | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Add to cart: Add To Cart) | 1 | |
| CP4450-S-3 | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/32") (Add to cart: Add To Cart) | 1 | |
| CP4450-S-4 | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/32") (Add to cart: Add To Cart) (Blows per minute: 1740) (Capaci | 1 | |
| CP4475-3 | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 1 | |
| CP4475-4 | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 1 | |
| CP4475-6 | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 1 | |
| CP5063 | ANTI -SEIZE COMPOUND MATERIAL | 1 | |
| CP7300 | DRILL, PNEUMATIC, PORTABLE | 1 | |
| CP7300C | NEW IMPROVED MODEL! Chicago Pneumatic Drill - CP Mini Palm Drill | 2 | |
| CP7300R | Chicago Pneumatic® Mini Air Drills (Rpm (no load): 3300) (Overall length: 6 1/4" (157 mm)) (Type: Non-Reversible) (Add to cart: Add To Cart) (Rpm (no load): 2700) (Overall length: 6 1/4" (157 mm)) (Type: Reversible) (Add to cart: Add To Cart) | 1 | |
| CP7300RC | Chicago Pneumatic Drill - CP Mini Palm Drill - REVERSIBLE | 3 | |
| CP7722 | Chicago Pneumatic® Impact Wrenches (Torque range: 5 to 65 ft-lbs (90 ft-lbs max.)) (Rpm: 9500) (Overall length: 6-5/16" (160 mm)) (Add to cart: Add To Cart) | 1 | |
| CP785 | Chicago Pneumatic® Economy Air Drills (Capacity: 3/8" Capacity - 0.5 hp (0.37 kW) - Non-Reversible) (Free rpm: 2400) (Overall length: 7" (178 mm)) (Add to cart: Add To Cart) | 1 | |
| CP785H | Chicago Pneumatic® Economy Air Drills (Capacity: 3/8" Capacity - 0.5 hp (0.37 kW) - Non-Reversible) (Free rpm: 2400) (Overall length: 7" (178 mm)) (Add to cart: Add To Cart) (Capacity: 1/2" Capacity - 0.5 hp (0.37 kW) - Non-Reversible) (Free rpm: 500) (Ov | 1 | |
| CP7901 | Chicago Pneumatic® Reciprocating Saw (Description: 5-Pack Reciprocating Saw Blades - 18 Teeth Per Inc) (Add to cart: Add To Cart) (Description: 5-Pack Reciprocating Saw Blades - 24 Teeth Per Inc) (Add to cart: Add To Cart) (Description: 5-Pack Reciprocati | 1 | |
| CP7901K | Chicago Pneumatic® Reciprocating Saw (Description: 5-Pack Reciprocating Saw Blades - 18 Teeth Per Inc) (Add to cart: Add To Cart) (Description: 5-Pack Reciprocating Saw Blades - 24 Teeth Per Inc) (Add to cart: Add To Cart) (Description: 5-Pack Reciprocati | 1 | |
| CP828 | PNUEMATIC RATCHET 3/8 DRIVE | 1 | |
| CP828H | Chicago Pneumatic® Ratchet Wrenches (Tube outer diameter: 10-50 ft-lbs) (Rpm: 150) (Overall length: 10" (254 mm)) (Square drive: 3/8") (Add to cart: Add To Cart) (Tube outer diameter: 10-50 ft-lbs) (Rpm: 150) (Overall length: 10" (254 mm)) (Square drive: | 1 | |
| CP872 | T025373 - 1/4" (6 MM) PNEUMATIC DIE GRINDER | 1 | |
| CP875 | Chicago Pneumatic RediPower 90 Degree Die Grinder | 2 | |
| CP876 | Chicago Pneumatic RediPower Straight Degree Die Grinder | 1 | |
| CP879C | CHICAGO PNEUMATIC DRILL | 1 | |
| CP9104Q | CHICAGO PNEUMATIC PENCILE GRINDER KIT | 2 | |
| CP9160 | Chicago Pneumatic RediPower Engraving Pen | 1 | |
| CP9161 | Chicago Pneumatic Engraving Pen - NEW & IMPROVED MODEL! | 1 | |
| CP9285C | Chicago Pneumatic / RediPower 3/8" Drill Motor | 1 | |
| CP9286C | Chicago Pneumatic / RediPower 1/2" Drill Motor | 1 | |
| CP9361 | AIR SCRIBE CHICAGO PNEUMATIC | 4 | |
| CP9790 | Chicago Pneumatic® Economy Air Drills (Capacity: 3/8" Capacity - 0.5 hp (0.37 kW) - Non-Reversible) (Free rpm: 2400) (Overall length: 7" (178 mm)) (Add to cart: Add To Cart) (Capacity: 1/2" Capacity - 0.5 hp (0.37 kW) - Non-Reversible) (Free rpm: 500) (Ov | 1 | |
| CP9790C | Chicago Pneumatic / RediPower 3/8" Drill Motor - REVERSIBLE | 1 | |
| CP9883 | Chicago Pneumatic / Redipower Blind "POP" Style Riveter - 3/16" Capacity | 1 | |
| CP9884 | Chicago Pneumatic / Redipower Blind "POP" Style Riveter - 1/4" Capacity | 1 | |
| CP9886 | Chicago Pneumatic / Redipower Blind "POP" Style Riveter - 3/16" Capacity | 1 | |
| CP9887 | Chicago Pneumatic / Redipower Blind "POP" Style Riveter - 1/4" Capacity | 1 | |
| CPC2699160Q | COMPACT ENGRAVER PNEUMATIC | 1 | |
| CPL00220005218MFL150 | YAMATO INTERNAL ROLLER BURNISHING TOOL (DIAMETER 21.90 MM-22.80 MM) TOOL CODE CPL00220005218MFL150 | 1 | |
| CRS 1 AL6061 | 6 STEP CALIBRATION BLOCK. STEP THICKNESS: 0.020", 0.040", 0.060", 0.100", 0.150", 0.200" +/- .001". STEP PAD SIZE: 1.0" x 1.0". MATERIAL: 6061-T6 ALUMINUM. Includes certification Report Traceable to NIST and Certificate of Conformance. | 1 | |
| CRS 2 AL6061 | 6 STEP CALIBRATION BLOCK. STEP THICKNESS: 0.100", 0.250", 0.400", 0.600", 0.800", 1.000" +/- .001". STEP PAD SIZE: 1.0" x 1.0". MATERIAL: 6061-T6 ALUMINUM. Includes certification Report Traceable to NIST and Certificate of Conformance. | 1 | |
| CRS AL2024 | 5 STEP CALIBRATION BLOCK. STEP THICKNESS: 0.200", 0.400", 0.600", 0.800", 1.000" +/- .001". STEP PAD SIZE: 1.0" x 1.0". MATERIAL: 2024-T351 ALUMINUM. Includes certification Report Traceable to NIST and Certificate of Conformance. | 1 | |
| CS-295-AG1120502 | Pneumatic wheel | 1 | |
| CS-295-AG131-E | PNEUMATIC SYSTEMS TESTING | 1 | |
| CS-AGE-40401 | Pistola engrasadora alta presion neumatica | 1 | |
| CS-AGE-EQ127 | Automatic leveling system for L&M Flight line Support (Wifi version) | 1 | |
| CS-AGE-EQ136 | Jaula seguridad para inflado de neumáticos | 1 | |
| CS-T10-AG101 | Bomba Oleoneumatica Para gatos | 1 | |
| CSK-100-.1900 | FORCEMATE BUSHING COUNTERSINK CUTTER, .1900 PILOT | 1 | |
| CSM170-70-3-A | AIR INTAKE PROTECTION MAT | 1 | |
| CTE 5100 | HYDRAULIC CART (PNEUMATIC) OPTIONAL TO PWA 49030) | 2 | |
| CTS-700 | PNEUMATIC TEST KIT | 8 | |
| CTSW-170 | WHEELPANT COVERS (specify material type) (set of 3) | 1 | |
| CW-23 OW-47 | C-130 CALIBRATION STANDARD. MATERIAL:7075-T7 or Equivalent Aluminum. FASTENER (NAS517-3-2) 2 Places. Includes Test Report and Certificate of Conformance For Standard and Certification for material and Fasteners. | 1 | |
| D-2069 | SIGMATEST (D2-069) PROBE FOR SIGMATEST (2-069US9068074) | 1 | |
| D-PT-206-RO | GREASE GUN PNEUMATIC ROJA | 1 | |
| D01040K2D1B01B0 | PNEUMATIC WING JACKING | 1 | |
| D0356045 | Universal Pneumatic Starter Test Stand PN | 1 | |
| D1545-8673 | Plate-Pneumatic Test | 1 | |
| D2-068 | SIGMATEST (UPDATED VERSION) | 1 | |
| D2-069 | COUNDUCTIVITY TEST EQUIPMENT (SIGMATEST) | 1 | |
| D2352800 | PNEUMATIC DRILL | 1 | |
| D3141-S-2100 | PNEUMATIC DRILL, 90° | 1 | |
| D315LTS | DRILL,PNEUMATIC,PORTABLE;ANGLE 45 DEG | 1 | |
| D36-001 | BANCO PRUEBAS ITCAN NEUMÁTICAS ( KIT 302 ) | 1 | |
| D49166AA | PMAT SYSTEM | 1 | |
| D790 | MAT.FORNEC: DOUBLE CRYSTAL TRANSDUCER WITH FREQUENCY OF 5 MHZ, TIP DIAMETER 0.434 IN. 11.02MM, MICRODOT CONNECTOR, MODEL D790 SM, BRAND OLYMPUS | 1 | |
| D790-RL | DUAL TRANSDUCER. 5 MHZ. 0.434 TIP DIAMETER. RIGHT ANGLE LEMO 00 CONNECTOR. MATCHING CABLE = LCLD-316 | 1 | |
| D790-SM | DUAL TRANSDUCER. 5 MHZ. 0.434 TIP DIAMETER. STRAIGHT MICRODOT CONNECTOR. MATCHING CABLE = LCMD-316-5 | 1 | |
| D798 | MAT.FORNEC: DOUBLE CRYSTAL TRANSDUCER WITH FREQUENCY OF 7.5 MHZ, TIP DIAMETER 0.283 IN. 7.2MM, WITH BUILT-IN CABLE, MODEL D798, BRAND OLYMPUS | 1 | |
| DA312 | THIN MATERIALS PROBE, 10 MHZ, 0.30" CONTACT DIA | 2 | |
| DA40-170 | FRONT WHEELPANT/STRUT COVER (specify material type) | 1 | |
| DA40-175 | MAIN GEAR WHEELPANT COVERS (specify material type) (set of 2) | 1 | |
| DAC ETBS AL-1T 2024-T3 0.063 | MD-80 REFERENCE STANDARD ETFL PROCEDURE 5, 06-10-02.005. MATERIAL: 2024-T3 ALUMINUM 0.063". Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETBS AL-1T/ 0.032 | MD-80 REFERENCE STANDARD ETFL PROCEDURE 5 Part 6 06-10-02 Page F1 Figure 1. Material: 7075-T7 ALUMINUM .032". Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETBS AL-1T/ 0.071 | MD-80 REFERENCE STANDARD ETFL PROCEDURE 5 Part 6 06-10-02 Page F1 Figure 1. Material: 2024-T3 ALUMINUM .071". Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETBS AL-1T/ 0.090 | MD-80 REFERENCE STANDARD ETFL PROCEDURE 5 Part 6 06-10-02 Page F1 Figure 1. Material: 7075-T6 ALUMINUM .090". Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETBS AL-1T/0.080 | MD-80 REFERENCE STANDARD ETFL PROCEDURE 5 Part 6 06-10-02 Page F1 Figure 1. Material: 2024-T3 ALUMINUM .080". Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH AL | Multi Purpose Calibration Standard. 13 Basic Hole Sizes; 1/8, 5/32, 3/16, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. .030 x .030 x .005 Corner EDM Notches in each Hole, .020 x .005 Thru EDM Notch in holes less than 3/16. Mat | 1 | |
| DAC ETOH FE | Multi Purpose Calibration Standard. 13 Basic Hole Sizes; 1/8, 5/32, 3/16, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. .030 x .030 x .005 Corner EDM Notches in each Hole, .020 x .005 Thru EDM Notch in holes less than 3/16. Mat | 1 | |
| DAC ETOH TI | Multi Purpose Calibration Standard. 13 Basic Hole Sizes; 1/8, 5/32, 3/16, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. .030 x .030 x .005 Corner EDM Notches in each Hole, .020 x .005 Thru EDM Notch in holes less than 3/16. Mat | 1 | |
| DAC ETOH-AL-1/2 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 1/2 (0.500) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-1/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 1/4 (0.250) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-1/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 1/8 (0.125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-11/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 11/16 (0.6875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-3/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 3/16 (0.1875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-3/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 3/4 (0.750) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-3/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 3/8 (0.375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-5/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 5/16 (0.3125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-5/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 5/8 (0.625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-7/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 7/16 (0.4375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-9/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 9/16 (0.5625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL.04 | 717-200 OPEN HOLE REFERENCE STANDARD. FIG. 1.20, PAGE 1. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-1/2 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 1/2 (0.500) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-1/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 1/4 (0.250) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-1/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 1/8 (0.125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-11/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 11/16 (0.6875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-3/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 3/16 (0.1875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-3/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 3/4 (0.750) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-3/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 3/8 (0.375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-5/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 5/16 (0.3125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-5/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 5/8 (0.625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-7/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 7/16 (0.4375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-9/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 9/16 (0.5625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE.08 | 717-200 REFERENCE STANDARD...FIG. 1.9, PAGE 1. MATERIAL: 4340 STEEL PER MIL-S-5000. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-1/2 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 1/2 (0.500) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-1/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 1/4 (0.250) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-1/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 1/8 (0.125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-11/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 11/16 (0.6875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-3/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 3/16 (0.1875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-3/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 3/4 (0.750) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-3/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 3/8 (0.375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-5/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 5/16 (0.3125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-5/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 5/8 (0.625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-7/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 7/16 (0.4375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-9/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 9/16 (0.5625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC GSET-AL.01 | MCDONNELL DOUGLAS REFERENCE STANDARD 06-20-01 FIG.1 SHEETS 1-3. MATERIAL: 7075-T6 ALUMINUM PER QQ-Q-250/12. | 1 | |
| DAC GSET-FE.01 | MCDONNELL DOUGLAS REFERENCE STANDARD 06-20-01 FIG.1 SHEETS 1-3. MATERIAL: 4340 STEEL PER MIL-S-5000 | 1 | |
| DAC GSET-TI.01 | MCDONNELL DOUGLAS REFERENCE STANDARD 06-20-01 FIG.1 SHEETS 1-3. MATERIAL: 6AL-4V TITANIUM PER AMS 491 or MIL-T-9046 | 1 | |
| DAN51C13 | PROFILE - RAW MATERIAL | 1 | |
| DAPT60-0206-00 | PNEUMATIC TORQUE MULTIPLIER | 1 | |
| DAT0MAPP100 | PNEUMATIC PUMP, 10,000PSI | 1 | |
| DAT0MAPP1000 | PNEUMATIC PUMP, 10,000PSI | 2 | |
| DB952 | Starrett 568C MATCHED V BLOCKS & CLAMP | 1 | |
| DC20 | DIXON VALVE AIRCHIEF BRASS SEMI-AUTOMATIC PULL SLEEVE QUICK- CONNECT COUPLER FEMALE PIPE THREAD 1/4 BODY SIZE X 1/4 FEMALE NPT | 1 | |
| DD02-5789 | MAXIMUM LOAD CAPACITY - 2000 AMPS DC. GUN METTALIC SILVER PINS. BACALITE MATERIAL PINS HOLDERS MAKE : USA OEM HOBART MCM ENGINEEING | 1 | |
| DES004 | SCRAPER BLADE & HOLDER KIT W/PNEUMATIC TOOL | 1 | |
| DESCO 16475 | ANTI-STATIC WRIST STRAP & MAT | 1 | |
| DFS33790-22 | PNEUMATIC PRESSURE TEST KIT 200V/50HZ. | 3 | |
| DG211RG4 | VERTICAL PNEUMATIC GRINDER | 1 | |
| DL056115 | EQUIPMENT HORIZ. STAB FTI FORCEMATE | 1 | |
| DLT02MAPP 1000 | PNEUMATIC PUMP 10000 PSI | 13 | |
| DLT02MAPP1000 | PUMP, PNEUMATIC | 13 | |
| DLT02MAPP1030 | PNEUMATIC PUMP | 1 | |
| DLT05MAPW0000 | PUMP, PNEUMATIC | 4 | |
| DLT20MAPP1000 | PNEUMATIC SWAGEING PUMP | 1 | |
| DLTO2MAPP1000 | PUMP ASSEMBLY-PNEUMATIC | 13 | |
| DM-104CYCLONE | DM VAC PNEUMATIC WITH CYCLONE NO CTK | 1 | |
| DMC1550 | DMC PNEUMATIC CRIMPER | 2 | |
| DMP0110 | STEP SANDING TOOL KIT - DARK MATTER COMPOSITES | 1 | |
| DN150 | METAL EXPANSION JOINT: 6”INCH, LENGTH: 180MM. BELLOW MATERIAL: AISI304/321 STAINLESS STEEL FLANGE MATERIAL: ST37, 2 CARBON STEEL, WORKING PRESSURE: PN16 WORKING TEMPERATURE: 80/427C MOVEMENT -20/+10MM(30MM) | 1 | |
| DN432 | Starrett 818 AUTOMATIC CENTRE PUNCH | 1 | |
| DN537 | Starrett 819 AUTOMATIC CENTRE PUNCH | 1 | |
| DOTCO 14CNL91-51 | DOTCO 14CNL SERIES NON-REVERSIBLE PISTOL GRIP PNEUMATIC DRILL (CHUCK INCLUDED). TERMINATION: 3/8” CHUCK FREE SPEED (RPM): 5,200 WEIGHT: 2.4LBS/1.09KG OVERALL LENGTH: 7.2”/183MM AIR INLET SIZE: 1/4” | 1 | |
| DOUGLAS 3792150-1 | BANCO PRUEBAS ITCAN NEUMÁTICAS ( KIT 302 ) | 1 | |
| DP 200-70-04 | PNEUMATIC DISPENSER 200 ML | 1 | |
| DP 200-70-0416 | PNEUMATIC GUN | 1 | |
| DP 30 NT | FORKLIFT "CAT" MATIC CATERPILLAR | 1 | |
| DP 400-85-01 | SULZER MIXPAC DP 400-85-01 PNEUMATIC DISPENSER | 1 | |
| DP200-70-06 | PNEUMATIC DISPENSER 200 ML | 1 | |
| DP2X 400-01-50-01 | DP2X PNEUMATIC DISPENSER 400ML 1:1 / 2:1 | 1 | |
| DP2X 400-10-50-01 | 10:1 RATIO 400 ML PNEUMATIC 2-PART ADHESIVE CARTRIDGE DISPENSER | 1 | |
| DPI515 | CONTROLLER-PNEUMATIC PRESSURE | 1 | |
| DPI611PC-13G | Pneumatic Calibrator,-15 to 300 PSIG | 1 | |
| DPI615PC | PORTABLE PNEUMATIC CALIBRATOR | 1 | |
| DPS 450 | BARFIELD AUTOMATED DIGITAL PITOT STATIC TEST SET | 9 | |
| DPS-450 | Barfield Pitot Static Test Set, RVSM, Digital, Automated | 9 | |
| DPS500 | BARFIELD DPS500 AIR DATA TEST SET, RVSM, DIGITAL, AUTOMATED | 11 | |
| DPST-3500M | DFW INSTRUMENTS PITOT STATIC TEST SET, DIGITAL, AUTOMATED | 1 | |
| DPST-8000M | AIR DATA TEST SET, DIGITAL, RVSM, AUTOMATED, REMOTE TERMINAL PN: DPST-8000 | 1 | |
| DPXB-13-33S-0019 | MATING CONNECTOR FOR PS-835 EN AND F | 1 | |
| DR-300-T3000-53-30 | PNEUMATIC BRACE(45DEG ANGLE) | 1 | |
| DR1412 | PNEUMATIC AIR DRILL 3/8"(9.5MM.) JACOBS CHUCK FULL CASE GEAR 2,600 RPM | 3 | |
| DR1414 | PNEUMATIC DRILL GUN | 2 | |
| DR300-T2000-THD-90 | PNEUMATIC DRILL 90-¦ | 1 | |
| DR300-T300-S5-45 | 45 DEGREE PNEUMATIC ANGLE DRILL 1/4"X28 SPINDLE | 1 | |
| DR300-T300-S5-90 | 90 DEGREE PNEUMATIC ANGLE DRILL 1/4"X28 SPINDLE | 1 | |
| DR300-T3000-S5-30 | Chicago Pneumatic Compact 30 Degree Threaded Drill | 2 | |
| DR300-T3000-S5-360 | Chicago Pneumatic / Desoutter Compact 360 Degree Threaded Drill | 2 | |
| DR300-T3000-S5-90 | Chicago Pneumatic Compact 90 Degree Threaded Drill | 4 | |
| DR350 -P3000-C8 | PNEUMATIC GUN | 2 | |
| DR350-P1000-C10 | Chicago Pneumatic® Air Drills (Capacity: 3/8" - 0.5hp (0.35 KW)) (Rpm (no load): 1000) (Overall length: 6" (154 mm)) (Type: Non-Reversible) (Add to cart: Add To Cart) | 1 | |
| DR350-P20000-C8 | Chicago Pneumatic air drill | 1 | |
| DR350-P3000-C8 | Chicago Pneumatic® Air Drills (Capacity: 3/8" - 0.5hp (0.35 KW)) (Rpm (no load): 1000) (Overall length: 6" (154 mm)) (Type: Non-Reversible) (Add to cart: Add To Cart) (Capacity: 5/16" - 0.5hp (0.35 KW)) (Rpm (no load): 20000) (Overall length: 4-3/4" (120 | 2 | |
| DR350-P4500-C8 | Chicago Pneumatic® Air Drills (Capacity: 3/8" - 0.5hp (0.35 KW)) (Rpm (no load): 1000) (Overall length: 6" (154 mm)) (Type: Non-Reversible) (Add to cart: Add To Cart) (Capacity: 5/16" - 0.5hp (0.35 KW)) (Rpm (no load): 20000) (Overall length: 4-3/4" (120 | 2 | |
| DR350-P550-C10 | Chicago Pneumatic® Air Drills (Capacity: 3/8" - 0.5hp (0.35 KW)) (Rpm (no load): 1000) (Overall length: 6" (154 mm)) (Type: Non-Reversible) (Add to cart: Add To Cart) (Capacity: 5/16" - 0.5hp (0.35 KW)) (Rpm (no load): 20000) (Overall length: 4-3/4" (120 | 1 | |
| DR350P3000 | BERBEQUIM T/PISTOLA PNEUMATICO | 1 | |
| DR750-P1300-C10 | DRILL-PISTOL,PNEUMATIC 1.0 HP,1300 RPM | 2 | |
| DR750-P400-C13 | PNEUMATIC DRILL | 1 | |
| DRCADPH10-76/9100 | ADAPTER TO MATE DC MILITARY HEADSET H10-76 TO DC 9100 WIRELESS SYSTEM. ONE END 4 CONDUCTOR U-94 JACK/SWITCH. ONE END JAE CLA CONDUCTOR CONNECTOR | 1 | |
| DRILLPNEUMATIC | PNEUMATIC DRILL | 1 | |
| DSS1020 | Kit - Master, Windshield (Consists Of Coating / Material / Chemical Supplies) | 1 | |
| DSS4020 | KIT - MASTER, WINDSHIELD (CONSISTS OF COATING / MATERIAL / CHEMICAL SUPPLIES) | 2 | |
| DTATK-9 | PNEUMATIC RIVETING DEVICE | 2 | |
| DV7MB14FB14 | SWIVEL PNEUMATIC ADAPTOR | 1 | |
| DVRS-PA | REMOTE START PNEUMATIC ADAPTER | 1 | |
| DW280KA-L40 | TORQUE MULTIPLIER (DAMATORK) | 1 | |
| DW688 | SPACEMATIC GUNS #3 SHORT | 1 | |
| DW820KA-L40 | TORQUE MULTPLIER DAMATORK | 1 | |
| DWDC0 5/32 | JOBBER LENGTH DRILL BIT - DWDCO SERIES, 5/32 IN, COBALT HIGH SPEED STEEL MATERIAL, 2 IN FLUTE, 118 ° | 1 | |
| DWDCO3/32 | JOBBER LENGTH DRILL BIT - DWDCO SERIES, 3/32 IN, COBALT HIGH SPEED STEEL MATERIAL, 1-1/4 IN FLUTE, 1 | 1 | |
| DWFP55130 | VERSATILE PNEUMATIC STAPLER WITH A TOOL-FREE DEPTH ADJUSTMENT FOR VARIOUS UPHOLSTERY TASKS. | 1 | |
| E02240 | ARMATURE CLIP | 1 | |
| E09406 | ARMATURE CLIP | 1 | |
| E107 | PNEUMATIC TEST FACILITY | 1 | |
| E1AA2R229C-ATEX | VERSA-MATIC E1AA2R229C-ATEX DOUBLE DIAPHRAGM PUMP, MAX 49 GPM, 125 PSI | 1 | |
| E1AA2R229C-B-ATEX | VERSAMATIC DIAPHRAGM PUMP MODEL E1AA2R229C-B-ATEX (PRG139) | 1 | |
| E53-002A | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .031"..Doubler = .040"..Filler = .031"..Stringer = .063" | 1 | |
| E53-002A. | EMBRAER 170/175 REFERENCE STANDARD PT 6 51-06-00 pages 7-10. Material: 2024-T3 Alclad Aluminum. Dual Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .031"..Doubler 1 = .040"..Doubler 2 = .063"..Filler = .... | 1 | |
| E53-002B | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .047"..Doubler = .050"..Filler = .047"..Stringer = .063" | 1 | |
| E53-002B. | EMBRAER 170/175 REFERENCE STANDARD PT 6 51-06-00 pages 7-10. Material: 2024-T3 Alclad Aluminum. Dual Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .047"..Doubler 1 = .050"..Doubler 2 = .063"..Filler = .... | 1 | |
| E53-002C | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .055"..Doubler = .063"..Filler = .055"..Stringer = .063" | 1 | |
| E53-002C. | EMBRAER 170/175 REFERENCE STANDARD PT 6 51-06-00 pages 7-10. Material: 2024-T3 Alclad Aluminum. Dual Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .055"..Doubler 1 = .063"..Doubler 2 = .063"..Filler = .... | 1 | |
| E53-002D | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .071"..Doubler = .080"..Filler = .071"..Stringer = .063" | 1 | |
| E53-002D. | EMBRAER 170/175 REFERENCE STANDARD PT 6 51-06-00 pages 7-10. Material: 2024-T3 Alclad Aluminum. Dual Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .071"..Doubler 1 = .080"..Doubler 2 = .063"..Filler = .... | 1 | |
| E53-002E | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .080"..Doubler = .098"..Filler = .080"..Stringer = .063" | 1 | |
| E53-002E. | EMBRAER 170/175 REFERENCE STANDARD PT 6 51-06-00 pages 7-10. Material: 2024-T3 Alclad Aluminum. Dual Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .080"..Doubler 1 = .098"..Doubler 2 = .063"..Filler = .... | 1 | |
| E53-002F | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .098"..Doubler = .110"..Filler = .098"..Stringer = .063" | 1 | |
| E53-002F. | EMBRAER 170/175 REFERENCE STANDARD PT 6 51-06-00 pages 7-10. Material: 2024-T3 Alclad Aluminum. Dual Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .098"..Doubler 1 = .110"..Doubler 2 = .063"..Filler = .... | 1 | |
| E53-003A | EMBRAER 170/175 REFERENCE STANDARD DUAL DOUBLER CONFIGURATION PT 6 53-06-00 pages 6-10 REV.1, Material: 2024-T3 Alclad. Includes Test Report and Certificate of Conformance. | 2 | |
| E53-003B | EMBRAER 170/175 REFERENCE STANDARD DUAL DOUBLER CONFIGURATION PT 6 53-06-00 pages 6-10 REV.1, Material: 2024-T3 Alclad. Includes Test Report and Certificate of Conformance. | 2 | |
| E53-003C | EMBRAER 170/175 REFERENCE STANDARD DUAL DOUBLER CONFIGURATION PT 6 53-06-00 pages 6-10 REV.1, Material: 2024-T3 Alclad. Includes Test Report and Certificate of Conformance. | 2 | |
| E53-003D | EMBRAER 170/175 REFERENCE STANDARD DUAL DOUBLER CONFIGURATION PT 6 53-06-00 pages 6-10 REV.1, Material: 2024-T3 Alclad. Includes Test Report and Certificate of Conformance. | 2 | |
| E53-003E | EMBRAER 170/175 REFERENCE STANDARD DUAL DOUBLER CONFIGURATION PT 6 53-06-00 pages 6-10 REV.1, Material: 2024-T3 Alclad. Includes Test Report and Certificate of Conformance. | 2 | |
| E53-003F | EMBRAER 170/175 REFERENCE STANDARD DUAL DOUBLER CONFIGURATION PT 6 53-06-00 pages 6-10 REV.1, Material: 2024-T3 Alclad. Includes Test Report and Certificate of Conformance. | 2 | |
| E53-004 | EMBRAER 190/195 REFERENCE STANDARD PT 6 53-23-00 pages 1-13. Material: 2024-T3 Alclad Aluminum. Repair Doubler Configuration. Includes Test Report and Certificate of Conformance. Repair Doubler = .125" Fus Skin Thickness = .098" Filler = .098" In | 2 | |
| EA4A-5991 | PAINT (TORQUE STRIPE MATERIAL) | 1 | |
| EADPD1500-01 | MIXCOAT DISPENSER PNEUMATIC F SYSTEM | 1 | |
| EBS30-DRIVE | ESA AUTOMATION EBS30-DRIVE 30/60A+ ETH+HYPERF ACE ESA | 1 | |
| ECFBAR300TRU | COLOR MATCH RECHRBLE SHOPLIGHT | 1 | |
| ECM-GV/550 | COWL MAINTENANCE PROTECTIVE MAT | 1 | |
| ECMGV/550 | COWL MAINTENANCE PROTECTIVE MAT | 1 | |
| ECP30 | Pneumatic Tin Can Press 30 Litre | 1 | |
| EEHD499021 | KOMATSU 12 PIN USB-LINK2 | 1 | |
| EG005127 (17283-19036) | ALLIG PNEUMATIC, SQUEEZER | 1 | |
| EGENFCAS1 | EGENFCAS1;Automated Fiber Char Script | 1 | |
| ELT TEMPLATE-1 | EDDY CURRENT CIRCLE TEMPLATE, 0.750"Ø. 3 HOLE SIZES: .749", .750",.751". MATERIAL: 2024-T351, 0.063" | 1 | |
| ELT TEMPLATE-2 | EDDY CURRENT CIRCLE TEMPLATE, 0.201"Ø. 3 HOLE SIZES: .200", .201",.202". MATERIAL: 2024-T351, 0.063" | 1 | |
| ELT TEMPLATE-3 | EDDY CURRENT CIRCLE TEMPLATE, SELECT RIVET SIZES. 12 HOLE SIZES: .125", .156",.187", .218", .250", .281", .312", .343", .375", .437", .500", .562". MATERIAL: 2024-T351, 0.063" | 1 | |
| EM-40266-1V212 | SIMATIC, UID CUMPLIANT KIT OR EQUIVALENT | 1 | |
| EMB-00181-071 | Pneumatic power leak test kit | 1 | |
| EMSSMLCDUPLEX | EMSSMLCDUPLEX;Duplex LC Singlemode Mating Sleeve | 1 | |
| EN3545-008B01 | MATING PIN SPLIT NUT KEY | 1 | |
| EN3545-008B02 | MATING PIN SPLIT NUT KEY | 1 | |
| EN60292 | PNEUMATIC PRC GUN | 1 | |
| ENB 45 | PNEUMATIC NITROGEN BOOSTER | 1 | |
| ET-55C-2 | BOMBARDIER / CHALLENGER 604 10 STEP ALUMINUM WEDGE, ET-53-30-012 PT 6 FIG. 2 . STEP THICKNESSES:, .024", .028", .031", .035", .039", .044", .048", .052", .056" .059" +/-0.002, . PAD SIZE: 1.0" x 1.0" +/-0.010", Material: 2024-T3 ALUMINUM. Chromic ano | 1 | |
| ET-55C-3 | BOMBARDIER / CHALLENGER 604 10 STEP ALUMINUM WEDGE, ET-53-30-012 PT 6 FIG. 2 . STEP THICKNESSES:, .024", .028", .031", .035", .039", .044", .048", .052", .056" .059" +/-0.002, . PAD SIZE: 1.0" x 1.0" +/-0.010", Material: 2124-T8 or 7075-T7 ALUMINUM. | 1 | |
| ET002 | BRANTLY B2 MAIN ROTOR BLADE ROOT SKIN CALIBRATION STANDARD PG.2. MATERIAL: 2024-T3 ALUMINUM BARE & CLAD. Includes Test Report and Certificate of Conformance. | 1 | |
| ET6018 | CUSTOM SIKORSKY S61-N FLAT BOTTOM HOLE AFT REAR FUSELAGE REFERENCE STANDARD 51-10-05 FIGURE 7 (SHEETS 1-5). MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certiicate of Conformance. | 1 | |
| ETL3100B06G06SPK | ALCOA PNEUMATIC INSTALLATION TOOL | 1 | |
| ETL3100B08J08SPK | ALCOA PNEUMATIC INSTALLATION TOOL | 1 | |
| ETL3100B10J10SPK | ALCOA PNEUMATIC INSTALLATION TOOL | 1 | |
| EVAL-FEE | EVAL-FEE;Diagnostic and Troubleshooting Fee for Repair Estimate | 1 | |
| EXBC670-59089-001 | CALIBRATION REFERENCE STANDARD SIMILAR IN MATERIAL AS THE INSPECTION AREA CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES, (MHIRJ) | 1 | |
| EXBC670-59089−001 | CALIBRATION REFERENCE STANDARD SIMILAR IN MATERIAL AS THE INSPECTION AREA CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670−59089−001 | Calibration reference standard similar in material as the inspection area containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| F1422453 | PMAT | 1 | |
| F1422529 | PMAT | 1 | |
| F1422699 | PMAT Software G2942AAC02 | 1 | |
| F1422907 | PMAT Software G2942AAC03 | 1 | |
| F1424010 | PMAT Software G2942AAD01 | 1 | |
| F1424538 | PMAT SOFTWARE V5 | 1 | |
| F15-AL-UT-0.175-2 | F15 REFERENCE STANDARD. MATERIAL: 2024-T3, OUTBOARD TORQUE BOX REAR SPAR, 68A115101, LOWER FLANGE FASTENER HOLES. Includes Test Report and Certificate of Conformance. | 1 | |
| F1571361 | TOOL PMAT | 2 | |
| F161 | PMAT2000 SOFTWARE | 4 | |
| F1710665 | PMAT SOFTWARE V6 | 1 | |
| F27767000 | FOR INFORMATION ONLY ELECTRONIC TEST BOX HARNESS CONTAINING A CONTROL POTENTIOMETER | 2 | |
| F450E | SLOT WEDGE WIRE STRAINER INSERT COMPLETE, FOR SAB AUTOMATIC FILTER F450E (MANUFACTURER: GEORG SCHUMANN GMBH ) | 1 | |
| F508 | AUTOMATIC TRANSMISSION PRESSURE GAUGE SET | 1 | |
| F70199-52 | INFLATION PNEUMATIC DIGITAL | 21 | |
| F70337-1 | TEST SET, PNEUMATIC SYSTEM | 1 | |
| F71246 | PLUG ASSY USED TO EXCLUDE FOREIGN MATTER FROM | 1 | |
| F72938 | TOOL SET -0 PNEUMATIC DUCT PRESS SYSTEM FOR | 1 | |
| F72938-1 | PNEUMATIC DUCT INSTALLTION KIT | 3 | |
| F72938-2 | PNUEMATIC DUCT PRESSURE SYSTEM.. | 1 | |
| F72999-1 | Wrench Set -Pneumatic System Ball Joint | 7 | |
| F72999-6-3 | Pneumatic Wrench Set | 1 | |
| F78AE0257-000 | FRONT PLUG MAT | 1 | |
| F78AE0257-000 REV A | FRONT PLUG MAT | 1 | |
| F80-0-50007 | WRENCH - AIR SHUTOFF VALVE PNEUMATIC FILTER (SPECIAL) | 2 | |
| F80093-1 | PLUG -0 ENGINE EXHAUST TO PREVENT FOREIGN MATTER | 1 | |
| F80211-153 | PLUG SET- PNEUMATIC DUCT PRESSURIZATION | 1 | |
| F80211-164 | Plug Set -Pneumatic Duct Pressurization | 1 | |
| F80229-67 | Schematic Placard | 1 | |
| FACOMV.320FH | PNEUMATIC WOODY | 1 | |
| FAR RAC 172 | HYDROPNEUMATIC TOOL | 1 | |
| FAR-FHU-05 | PNEUMATIC RIVET GUN | 1 | |
| FB-300N | FORCE GUAGE; MECHANICAL 300N ±0.3% P/N FB-300N MANUFACTURER: ELECTROMATIC | 1 | |
| FC16 | PNEUMATIC RIVET SQUEEZER | 1 | |
| FCD-1501-70010A | FORCEMATE CORE DRILL, .2400 CUTTER/.1905 PILOT (CLASS 1) | 1 | |
| FCD-1501-70110A | FORCEMATE CORE DRILL, .3100 CUTTER/.2390 PILOT (CLASS 2) | 1 | |
| FCD-1501-70111A | FORCEMATE CORE DRILL, .3100 CUTTER/.2520 PILOT (CLASS 2) | 1 | |
| FCLP-LAN-10 | FCLP-LAN-10;Lanyard for FCLT Tips and Mating Adapters 10 cm | 1 | |
| FCLP-LAN-10-2S | FCLP-LAN-10-2S;Dual Snap Lanyard for FCLT Tips and Mating Adapters | 1 | |
| FCLT-CS-CF-MA | FCLT-CS-CF-MA;Mating Adapter for FCLT-CS-CF CleanBlast Tip | 1 | |
| FCLT-FC-CF-MA | FCLT-FC-CF-MA;Mating Adapter for FCLT-FC-CF | 1 | |
| FCLT-LC-CF-MA | FCLT-LC-CF-MA;Mating Adapter for FCLT-LC-CF Cleaning Tip | 1 | |
| FCLT-MDC-CF-MA | FCLT-MDC-CF-MA;Mating Adapter for FCLT-MDC-CF CleanBlast Tip | 1 | |
| FCLT-MMC-CF-MA | FCLT-MMC-CF-MA;Mating Adapter for FCLT-MMC-CF Cleaning Tip | 1 | |
| FCLT-MT-MA | FCLT-MT-MA;Mating Adapter for FCLT-MT CleanBlast Tip | 1 | |
| FCLT-MTP-MA | FCLT-MTP-MA;Mating Adapter for FCLT-MTP CleanBlast Tip | 1 | |
| FCLT-SC-CF-MA | FCLT-SC-CF-MA;Mating Adapter for FCLT-SC-CF Cleaning Tip | 1 | |
| FCLT-SMA-MA | FCLT-SMA-MA;Mating adapter for FCLT-SMA Cleaning Tip | 1 | |
| FCLT-SN-BTW1-CF-MA | FCLT-SN-BTW1-CF-MA;Mating Adapter for FCLT-SN-CF to BTW1 CleanBlast Tip | 1 | |
| FCLT-SN-BTW2-CF-MA | FCLT-SN-BTW2-CF-MA;Mating Adapter for FCLT-SN-CF to BTW2 CleanBlast Tip | 1 | |
| FCLT-SN-CF-MA | FCLT-SN-CF-MA;Mating Adapter for FCLT-SN-CF CleanBlast Tip | 1 | |
| FCLT-U12-MA | FCLT-U12-MA;Mating Adapter for FCLT-U12 CleanBlast Tip | 1 | |
| FCLT-U25-MA | FCLT-U25-MA;Mating Adapter for FCLT-U25 CleanBlast Tip | 1 | |
| FD1107-04.75 | PNEUMATIC LOW PRESSURE DRY AIR TEST KIT | 1 | |
| FD1205-02.32 | POWER SUPPLY-28V 35 AMPS, POWERMATE | 1 | |
| FD622 | MATCO FLEXIBLE PICK UP | 1 | |
| FERVIT021/030-T021 | "AUTOMATIC PRECISION BORING HEAD SET, ART. | 1 | |
| FIR-1911-15010A | .2030 REAMER / .2020 PILOT (FORCEMATE BUSHING FINAL REAMER) | 1 | |
| FL-60 | PNEUMATIC SWING MACHINE | 1 | |
| FLUKE 729 | AUTOMATIC PRESSURE CALIBRATOR | 1 | |
| FLUKE700HPPK | PNEUMATIC TEST PUMP KIT | 1 | |
| FMC-L | FORCEMATE NOSECAP | 1 | |
| FMC-L-MR | FORCEMATE NOSECAP - MANUAL RELEASE | 1 | |
| FMM-1501-25010B | FORCEMATE MANDREL (UP TO 0.8" LENGTH) | 1 | |
| FMM-1501-25010C | FORCEMATE MANDREL (UP TO 1" LENGTH) | 1 | |
| FOKKER-50/60 | FOKKER 50/60 CALIBRATION STANDARD PART 6 53-30-09 PAGE 6 FIGURE 3. MATERIAL: 2024-T3 ALUMINUM. NOTE: ***DOES NOT INCLUDE 3M BELLY PROTECTIVE TAPE 8641 | 1 | |
| FOS-50CNP | PNEUMATIC 5 ORBITAL SANDER | 1 | |
| FPCV-12 | PNEUMATIC CYLINDER VISE | 1 | |
| FSR-1501-10010A | FORCEMATE REAMER, .2530 CUTTER/.2390 PILOT (CLASS 1) | 1 | |
| FSR-1501-10110A | FORCEMATE REAMER, .3240 CUTTER/.3090 PILOT (CLASS 2) | 1 | |
| FUJI FRH-6-2 | HAMMER,PNEUMATIC,PORT ABLE | 1 | |
| FXT-13304 | AUTOMATIC TEST EQUIPMENT (ATE) (FXT-13304) | 1 | |
| G-704B | CHERRYMAX PNEUMATIC GUN | 11 | |
| G1004500046-005 | PMAT COMBINED APPLICATIONS INSTALLER | 1 | |
| G1004500051-001 | PMAT KIT (SERVICE CENTER) | 1 | |
| G1004500051-003 | PMAT HARDWARE ACCESSORY KIT (OWNER/OPERATOR) (SUPERCEDED) | 1 | |
| G1004500051-053 | PMAT KIT | 1 | |
| G1004500051-055 | PMAT HARDWARE ACCESSORY KIT (OWNER/OPERATOR) (SUPERCEDED) | 1 | |
| G1004500051-075 | PMAT HARDWARE ACCESSORY KIT (OWNER/OPERATOR) | 1 | |
| G1004500058-001 | PMAT SOFTWARE APPLICATIONS LAUNCHER | 1 | |
| G1004500060-001 | PMAT LAPTOP | 1 | |
| G1004500350-001 | PMAT KIT, 2ND. GENERATION (PROLINE 21 ADVANCED) | 1 | |
| G1004500350-003 | PMAT KIT, 2ND. GENERATION (PROLINE 21) | 1 | |
| G150 | PRISMATIC COMPASS | 2 | |
| G215T300002-111 | PNEUMATIC TEST PANEL | 1 | |
| G2942AAD01 | PMAT SOFTWARE SUITE | 1 | |
| G335 | AFGA AUTOMATIC PROCESS | 2 | |
| G34003-3 | SCHEMATIC PLACARD | 1 | |
| G34003-9 | SCHEMATIC PLACARD | 1 | |
| G36023 | PLUG -0 PNEUMATIC DUCT, HYDROSTATIC TEST | 1 | |
| G36023-1 | PLUG - PNEUMATIC DUCT, HYDROSTATIC TEST | 1 | |
| G36024 | PLUG EQPT -0 PNEUMATIC DUCT TEST | 1 | |
| G36024-1 | PLUG EQUIPMENT - PNEUMATIC DUCT TEST | 1 | |
| G36025 | PLUG EQPT -0 PNEUMATIC DUCT TEST | 1 | |
| G36025-1 | PLUG EQUIPMENT - PNEUMATIC DUCT TEST | 1 | |
| G36026 | PLUG EQPT -0 PNEUMATIC DUCT, HYDROSTATIC TEST | 1 | |
| G36026-1 | PLUG EQUIPMENT - PNEUMATIC DUCT, HYDROSTATIC TEST | 1 | |
| G36028 | PLUG -0 PNEUMATIC DUCT, HYDROSTATIC TEST | 1 | |
| G36028-1 | PLUG - PNEUMATIC DUCT, HYDROSTATIC TEST | 1 | |
| G36029 | PLUG -0 PNEUMATIC DUCT, HYDROSTATIC TEST | 1 | |
| G36029-1 | PLUG - PNEUMATIC DUCT, HYDROSTATIC TEST | 1 | |
| G36030 | PLUG -0 PNEUMATIC DUCT, HYDROSTATIC TEST | 1 | |
| G36030-1 | PLUG - PNEUMATIC DUCT, HYDROSTATIC TEST | 1 | |
| G36035 | TEST BOX PNEUMATIC HEALTH C | 2 | |
| G36035-1 | TEST EQUIPMENT - PNEUMATIC SYSTEM HEALTH CHECK | 6 | |
| G36035-1-REP | REPAIR - Pneumatic System Health Test Equipment | 1 | |
| G36035-18 | 45 DEGREE PNEUMATIC TEST FITTING | 5 | |
| G36035-2 | GE & PW FITTING BOX-PNEUMATIC | 1 | |
| G36035-25 | 90 DEGREE PNEUMATIC TEST FITTING | 2 | |
| G36035-36 | TEST EQUIPMENT - PNEUMATIC SYSTEM HEALTH CHECK | 13 | |
| G36035-6 | TEST BOX -0 PNEUMATIC SYSTEM | 1 | |
| G36035-77 | TEST EQUIPMENT - PNEUMATIC SYSTEM HEALTH CHECK | 8 | |
| G36035-81 | Test eqpt-pneumatic system health check | 3 | |
| G38004-10 | TOILET UNBLOCK TOOL (PNEUMATIC) | 14 | |
| G46006-12 | PNEUMATIC DUCT CAP | 1 | |
| G49006-10 | PNEUMATIC DUCT CAPS | 1 | |
| G50783 | COUPLANT - SOUNDSAFE ULTRASONIC COUPLANT, [OMAT 655] | 1 | |
| G600-210004-197 | KIT, PNEUMATIC, PRESSURE TEST | 2 | |
| G600-210004-219 | KIT PNEUMATIC PRESSURE TEST | 2 | |
| G600-210004-221 | Kit - Pneumatic Pressure Test (115 V/60 Hz) | 2 | |
| G600-210004-225 | MATERIAL DESCRIPTION KIT, PNEUMATIC PRESSURE TEST 220V-50HZ | 1 | |
| G600-210004-227 | Kit - Pneumatic Pressure Test (220/240 V/50 Hz) | 2 | |
| G600-210004-227-REVG | KIT - PNEUMATIC PRESSURE TEST (220/240 V/50 HZ) | 1 | |
| G600-210007-227 | KIT, PNEUMATIC PRESSURE TEST 220V/50HZ | 1 | |
| G600−210004−197 | KIT - PNEUMATIC PRESSURE TEST (220/240 V/50 HZ) | 2 | |
| G600−210004−221 | KIT − PNEUMATIC PRESSURE TEST (115 V/60 HZ) | 2 | |
| G600−210004−227 | Kit − Pneumatic Pressure Test (220/240 V/50Hz) | 2 | |
| G601-100003-77 | COVER, SET (LH) (RH) POWER PLANT, SOFT MATERIAL | 4 | |
| G601-210004-221 | KIT-PNEUMATIC TEST | 1 | |
| G601-210007 201 | KIT - PNEUMATIC PRESSURE TEST ALTITUDE L | 3 | |
| G601-210007-1 | Kit - Pneumatic Pressure Test Altitude Limiter (Outflow Valve) | 1 | |
| G601-210007-145 | Kit - Pneumatic Pressure Test Altitude Limiter (Outflow Valve) (220V/50Hz) | 1 | |
| G601-210007-199 | Kit - Pneumatic Pressure Test Altitude Limiter (Outflow Valve) (115V/60Hz) | 2 | |
| G601-210007-201 | Kit - Pneumatic Pressure Test Altitude Limiter (Outflow Valve) (220V/50Hz) | 3 | |
| G601-210007-201-REVG | KIT - PNEUMATIC PRESSURE TEST ALTITUDE LIMITER (OUTFLOW VALVE) (220V/50HZ) | 1 | |
| G601-210007-203 | KIT - PNEUMATIC PRESSURE TEST ALTITUDE LIMITER | 1 | |
| G601-210007-3 | Kit - Pneumatic Pressure Test Altitude Limiter (Outflow Valve) | 1 | |
| G601-210007???201 | KIT - PNEUMATIC PRESSURE TEST ALTITUDE LIMITER OU | 3 | |
| G601-210007−199 | KIT - PNEUMATIC PRESSURE TEST ALTITUDE LIMITER(OUTFLOW VALVE) (115V/60HZ) | 2 | |
| G601-210007−201 | KIT - PNEUMATIC PRESSURE TEST ALTITUDE LIMITER (OUTFLOW VALVE) (220V/50HZ) | 3 | |
| G601R760001-7 | VOIR JOBBOSS POUR PLUS DINFORMATIONS | 1 | |
| G601−210007−1 | Kit − Pneumatic Pressure Test Altitude Limiter (Outflow Valve) | 1 | |
| G601−210007−145 | Kit − Pneumatic Pressure Test Altitude Limiter(Outflow Valve) (220V/50Hz) | 1 | |
| G601−210007−199 | Kit − Pneumatic Pressure Test Altitude Limiter(Outflow Valve) (115V/60Hz) | 2 | |
| G601−210007−201 | KIT − PNEUMATIC PRESSURE TEST ALTITUDE LIMITER (OUTFLOW VALVE) (220V/50HZ) | 3 | |
| G601−210007−3 | Kit − Pneumatic Pressure Test Altitude Limiter (Outflow Valve) | 1 | |
| G604-450002-33 | Pmat (Portable Maintenance Access Terminal) | 1 | |
| G604-450002-39 | Pmat (Portable Maintenance Access Terminal) | 1 | |
| G604-450002-47 | Pmat (Portable Maintenance Access Terminal) | 1 | |
| G604-450002-59 | KIT, PMAT, (ON A/C 5828 TO 5990 AND POST SB 605-34-009) | 1 | |
| G604−450002−33 | PMAT (Portable Maintenance Access Terminal) | 1 | |
| G604−450002−39 | PMAT (Portable Maintenance Access Terminal) | 1 | |
| G604−450002−49 | PMAT (Portable Maintenance Access Terminal) | 1 | |
| G700-282002-1-REVNC-FAB | FABRICATION SPLINE CHEZ AVITEC MAT SS304 | 1 | |
| G700-454501-1 | KIT - PORTABLE MAINTENANCE-ACCESS TERMINAL (PMAT) | 1 | |
| G700-711302 | Protective Mats - Lower Engine Cowl | 1 | |
| G700-711302-1 | PROTECTIVE MATS − LOWER ENGINE COWL | 1 | |
| G700−711302−1 | PROTECTIVE MATS − LOWER ENGINE COWL | 1 | |
| G704B | CherryMAX G704B Lightweight Pneumatic Hydraulic Power Riveter | 11 | |
| G704B KIT | CHERRY AEROSPACE PNEUMATIC RIVETER G704B WITH THREE DIFFERENT PULLING HEADS AS A KIT | 1 | |
| G743 | CherryMax G743 Pneumatic Hydraulic Power Riveter | 3 | |
| G744 | Cherry Aerospace Pneumatic Hydraulic Rivet Gun | 5 | |
| G746A | CHERRYMAX PNEUMATIC RIVETER | 5 | |
| G747 | CherryMax G747 Lightweight Pneumatic Hydraulic Power Riveter | 10 | |
| G784 | CHERRY RIVETER PNEUMATIC + 5 PULL HEADS | 13 | |
| G784CLRA | RIVETER,BLIND,PNEUMATIC - RIVETER,BLIND,PNEUMATIC | 3 | |
| G800 | CHERRY G800 Lightweight Pneumatic Hydraulic Hand Riveter | 8 | |
| G83 | RIVTEUSE PENEUMATIC | 4 | |
| G84 | "CHERRY PNEUMATIC RIVETER | 6 | |
| G84 LBK | CHERRY PNEUMATIC RIVETER (G84 LBK) | 3 | |
| G84-LS | RIVETER,JAM,PNEUMATIC | 1 | |
| G84LBK | MAQUINA CHERRY MAX PNEUMATICA | 3 | |
| G85D-S | RIVET GUN-RIVETER PNEUMATIC-HYDRAULIC SPLIT LOCKBOLT INSTALLATION TOOL | 5 | |
| GA143C | REPAIR TOOL,PNEUMAT | 1 | |
| GA427A | Blue-Point 10'/3M AUTOMATIC POWER TAPE | 1 | |
| GA47801 | PNEUMATIC ADAPTING ASSEMBLY FIGURE 902 | 1 | |
| GB704 | GB704 PNEUMATIC REBITTER | 3 | |
| GB713BB-08 | HUCK PNEUMATIC RIVETER RIVETTING KIT | 1 | |
| GB722 | PNEUMATIC RIVETER WITH COMPLETE ACESSORIES | 4 | |
| GB745 | RIVETER,BLIND,PNEUMATIC | 3 | |
| GBP752 | PNEUMATIC-HYDRAULIC RIVETER | 1 | |
| GDR10.8 | BOSCH SARJLI MATKAP | 1 | |
| GE56883 | Cup washer deformation tool | 1 | |
| GEN4177 | CART KIT - COMPOSITE MATERIAL | 1 | |
| GENIE SLA25 | SUPERLIFT ADVANTAGE STANDARD BASE MATERIAL LIFT | 2 | |
| GG0454510-0001 | SMART PMAT | 1 | |
| GGG-P-83 | PUNCH,CENTER,AUTOMATIC | 1 | |
| GH703 | GH703 CHERRY PNEUMATIC RIVET TOOL | 1 | |
| GH743 | GHA743 CHERRY PNEUMATIC RIVET TOOOL | 1 | |
| GH780 | GH80 CHERRRY PNEUMATIC RIVET TOOL | 1 | |
| GMIOTP050 | PNEUMATIC HOSE (HEATCON) | 1 | |
| GMISA9501-2 | PNEUMATIC-DE-ICER BO N/P GMISA9501-2 S/N SA950635 | 2 | |
| GP 3134D | GREY PNEUMATIC 3/4 DRIVE X 1-1/16" DEEP - 12 POINT IMPACT SOCKET | 1 | |
| GP 3148D | GREY PNEUMATIC 3/4 DRIVE X 1-1/2" DEEP - 12 POINT IMPACT SOCKET | 1 | |
| GP3126D | GREY PNEUMATIC 3126D 3/4 DRIVE X 13/16"" DEEP - 12 POINT | 1 | |
| GS13983-1 | CLAMP ASSY SUBLIMATOR | 1 | |
| GS15015-1 | ADAPTER ASSY, PNEUMATIC TEST | 1 | |
| GS18037 | HAMMER PNEUMATIC, PORTABLE | 1 | |
| GS22250-1 | PNEUMATIK STARTER CMM 80-13-41; HOUSING, INLET - REPAIR 3-1 | 1 | |
| GS22251-1 | PNEUMATIK STARTER CMM 80-13-41; HOUSING, INLET - REPAIR 3-1 | 1 | |
| GS23960-1 | CRIMPING TOOL,PNEUMATIC | 1 | |
| GSE 279 | ADAPTERS SET - TEST, PNEUMATIC SYSTEM | 1 | |
| GSE 450 | EMBRAER190/195 REFERENCE STANDARD PART 6 57-50-00 PAGE 5 FIGURE 1. Material: 6AL-4v Titanium. Includes Test Report and Certificate of Conformance. | 1 | |
| GSE187 | PNEUMATIC UNIT,EN-GINE START | 1 | |
| GSE196 | SAFETY PIN FOR PNEUMATIC ASSY | 1 | |
| GSE221 | PMAT 2000 KIT | 1 | |
| GSE7200180 | NOSE COWL PROTECTIVE MAT-GSE7200180 | 1 | |
| GSE809- 212A4002-HF | HOLDING FIXTURE AFT PNEUMATIC SOURCE ASSY & TEST | 1 | |
| GSR 14,4-2-LI | SARJLI MATKAP 144 VOLT | 1 | |
| Garret 3792150-1 | BANCO PRUEBAS ITCAN NEUMÁTICAS ( KIT 302 ) | 1 | |
| H ATI100A71/8 | RIVET SET, PNEUMATIC | 1 | |
| H-2836 | PNEUMATIC FLOWMETER | 1 | |
| H-5216 | PNEUMATIC SHEAR | 1 | |
| H-5265 | RACCORD PNEUMATIQUE (PDR FOR INFLATION MANO 134943) | 13 | |
| H102261-1 | SET JIG – MATRIX BYPASS VALVE | 1 | |
| H207429-1 | FIXTURE – MATRIX BYPASS VALVE | 1 | |
| H21966-1000 | CRIMPING DEVICE - BALL MATS | 8 | |
| H701B-456 | PULLING HEAD,PNEUMATIC RIVETER | 10 | |
| H744A-8 | 1. СHERRY MAX GUN 1/4 RIVERTER - PNEUMATIC ,3800 LBS / STROKE 0.580 | 2 | |
| H7503-10 | CRIM PING DEVICE-BALL MATS | 1 | |
| H781-456 | PULLING HEAD,PNEUMATIC RIVETER | 10 | |
| H781A-456 | PULLING HEAD,PNEUMATIC RIVETER | 5 | |
| H8603-1 OF | CRIMPING DEVICE - BALL MATS | 1 | |
| H8603-10 | CRIMPING DEVICE - BALL MATS | 6 | |
| HANDLING CHARGE | HANDLING, ENERGY, MATERIAL AND INFLATION COMPENSATION SURCHARGE | 1 | |
| HC2-S3 | STANDARD CLIMATE PROBE | 1 | |
| HCS1008-085 | PNEUMATIC SPRING ASSIST PARA HCS2044-20 | 1 | |
| HCS2034-01 | PNEUMATIC BLADE CLAMP | 1 | |
| HCS2036-01-200 | PNEUMATIC SCRAPER SHARPENER | 1 | |
| HCS2036-05 | "TOOL KIT GENERAL COMPOSITE REPAIR PNEUMATIC | 3 | |
| HCS2700-34-25 –1 | COMPOSITE MATERIAL FREEZER | 1 | |
| HCS2700-34-25-1 | COMPOSITE MATERIAL FREEZER | 1 | |
| HCS2700-34-25-2 | COMPOSITE MATERIAL FREEZER | 1 | |
| HCS9000-72-170 | TOOL - CABLE REPAIR EQUIPMENT MAT | 3 | |
| HCS9000B | HOT BONDER FOR COMPOSITE MATERIAL REPAIR | 4 | |
| HJ9B 80080- | PMAT 2000 ARINC 615A LOAD TO RJ45 ADAPTER KIT CABLE (6FT) | 1 | |
| HJ9B P/N 80080-1 | PMAT 2000 ARINC 615A LOAD TO RJ45 ADAPTER KIT CABLE (6FT) | 1 | |
| HLA2006-312-078T | PNEUMATIC MACHINE ANG.20G FOR COL | 1 | |
| HLA6141 | Bi-Valve Pneumatic Inflation Device | 1 | |
| HLA6588 | Pneumatic Inflation Case (Pressure Gauge + Digital Inflation Handle 12 or 17bar) | 1 | |
| HLA7086-A | PNEUMATIC INFLATION SUITCASE (MANODET + INFLATION HANDLE + TWO FLEXIBLE EXTENSIONS PD AND GD) | 1 | |
| HLA7115-1 | PNEUMATIC INFLATOR FOR HIGH-FLOW VALVE | 1 | |
| HLA7128-1 | PNEUMATIC INFLATOR FOR STD VALVE | 1 | |
| HLG-EIPM2016 | ENGINE INLET PROTECTIVE MAT | 1 | |
| HLKT2000 | Hi-Lok® Pneumatic Installation & Removal Kit (Description: Hi-Lok® Pneumatic Installation & Removal Kit - Com) (Add to cart: Add To Cart) | 2 | |
| HM14-120/34CL10-9ZN | YOKE, PNEUMATIC | 1 | |
| HONEYWELL ET STANDARD | HONEYWELL EDDY CURRENT WHEEL SURFACE STANDARD. MATERIAL:2024-T6 FORGED ALUMINUM. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| HP301C | RIVET TOOL,PHEUMATIC-HYDRAUL | 3 | |
| HP302A | RIVET TOOL, PNEUMATIC/HYDRAULIC | 2 | |
| HP82905B | MATRIX PRINTER | 1 | |
| HPS1 3059A | AUTOMATIC 100 - GAUSS HELMHOLTZ CALIBRAR (PRODUCT NUMBER 11-08-03-04) | 1 | |
| HPS1-3059A | AUTOMATIC 100 - GAUSS HELMHOLTZ CALIBRAT (PRODUCT NUMBER: 11-08-03-04) | 1 | |
| HS8883 | ADAPTER PNEUMAT | 1 | |
| HS8892 | ADAPTER PNEUMAT | 1 | |
| HS9054 | ADAPTER TEST PNEUMATIC | 1 | |
| HS9630 | PNEUMATIC TEST ADAPTER | 1 | |
| HSC07-401-6 | USATCO 3/16 PNEUMATIC HL SHOVEL | 1 | |
| HTC-2 | INSPECTION MIRROR: 2 1/4 IN DIA MIRROR SIZE, MIRR. MAT. GLASS, MIRR. SHP. ROUND | 4 | |
| HU28706 | Pneumatic Hammer | 1 | |
| HU44591 | Matt- Protective | 1 | |
| HU44592 | Matt- Protective Fan Case Acoustic Panels | 1 | |
| HU44593 | Protective mat | 1 | |
| HU44594 | Protective mat | 1 | |
| HU55076 | ADAPTER-R/I PNEUMATIC STARTER | 4 | |
| HU55142 | MAT - PROTECTIVE - AIR INTAKE COWL. | 6 | |
| HU55142-1 | MAT - PROTECTIVE, AIR INTAKE COWL. | 10 | |
| HU55178 | ADAPTER, REM.-INST. PNEUMATIC STARTER | 1 | |
| HU55178-2 | ADAPTER-R I PNEUMATIC STARTER | 5 | |
| HU55178-3 | ADAPTER-R I PNEUMATIC STARTER | 7 | |
| HU55183 | PLATE, ADAPTER - R I PNEUMATIC STARTER | 1 | |
| HU55330 | ADAPTER-R I PNEUMATIC STARTER | 1 | |
| HU55330-1 | ADAPTER-R I PNEUMATIC STARTER | 9 | |
| HU553301 | ADAPTER-R I PNEUMATIC STARTER | 9 | |
| HU55690 | ADAPTER-R I PNEUMATIC STARTER | 1 | |
| HU82132 | WORK MAT PROTECTIVE | 2 | |
| HUCK 2025 | Pneumatic R. (3 boq. 99-2706, 99-2707,99-2701) | 5 | |
| HUCK 244 | PNEUMATIC ASSEMBLY TOOL | 1 | |
| HUCK GUN 202 | PNEUMATIC HUCK GUN 202, PNEUMATIC HUCK GUN 202 | 1 | |
| HUCK GUN 254 | PNEUMATIC HUCK GUN 254, PNEUMATIC HUCK GUN 254 MODEL: HUCK254 | 1 | |
| HUCK-GUN | PNEUMATIC HUCK GUN TOOL | 1 | |
| HUCK244 | PNEUMATIC RIVET GUN | 1 | |
| HUCK245 | REBITADEIRA PNEUMATICA HUCK MOD 245 | 1 | |
| HUCK352 | PNEUMATIC RIVETER | 2 | |
| HW-PNEUHOSE1/2 | PNEUMATIC AIR HOSE 1/2IN X 300PSI B | 1 | |
| HW2001 | MATERIAL IS NEEDED FOR KIT P/N BAT-VLHK-102 JO-BOLT INSTALLATION KIT | 1 | |
| HX23 | Pneumatic Open Frame Crimp Tool - HX4 Equivalent | 2 | |
| HX33 | Open Frame Pneumatic Crimp Machine | 2 | |
| Honeywell ET Standard | Honeywell Eddy Current Wheel Surface Standard. Material:2024-T6 Forged Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| I-0001 | Deflation Adapter Pneumatic System | 1 | |
| IA3202 | ADAPTER, BRAKE INSTALLATION AND REMOVAL (INDUSTRIAL AUTOMATION, INC.) | 1 | |
| IA5101-1 | HOIST - FISHPOLE MIN 500 LB CAPACITY & 40 FT CABLE & LOAD LIMITER (MANUAL AND PNEUMATIC DRIVE) | 2 | |
| IAE 1P16662 | PNEUMATIC STARTER | 1 | |
| IAE1F10007 | PULLER REMOVAL MATING RING GEARBOX A321 | 12 | |
| IAE1F10008 | PULLER REMOVAL MATING RING GEARBOX A321 | 11 | |
| IAE1F10009 | PULLER GEAR BOX MATING RING | 14 | |
| IAE1F10031 | PUSHER/INST MATING RING GEARBOX A321 | 14 | |
| IAE1F10032 | PUSHER,IDG MATING RING | 10 | |
| IAE1F10069 | PULLER,DEOILER GEAR MATING RING REMOVAL | 15 | |
| IAE1F1007 | PULLER GEAR BOX MATING RING | 1 | |
| IAE1F10070 | PUSHER,DEOILER GEAR MATING RING | 15 | |
| IAE1F1008 | PULLER GEAR BOX MATING RING | 1 | |
| IAE1P16662 | ADAPTOR PNEUMATIC STARTER | 1 | |
| IAE6F10029 | PNEUMATIC CART | 1 | |
| IAG-252-01 | PNEUMATIC DUCT FOR AIRMOTOR STARTER FOR JT9D | 1 | |
| ICORE 16-0803 | HYDRAULIC/PNEUMATIC CRIMPING TOOL | 1 | |
| ICORE16-0987 | PNEUMATIC CRIMPING TOOL | 1 | |
| IDL44-774 | PNEUMATIC LOCKOUT | 1 | |
| IEA1R18893 | PULLER REMOVAL MATING RING GEARBOX A321 | 1 | |
| IFF-7300S | IFF/Crypto/TACAN Automated Test System | 1 | |
| IL-24 | PNEUMATIC BENCH VISE | 1 | |
| INSPECTIONFEE | REQUIRED ANNUAL SUPPORT FEE FOR PMAT XS® KIT P/N PXS-LDS-10 | 1 | |
| INT-500 | TIRE COVERS (no wheelpant faring) (specify material type) (set of 2) | 1 | |
| IP65 | MITUTOYO 293-961-30 IP65 DIGIMATIC MICROMETER SET 0-100MM (0-4″) | 1 | |
| IPR 0125 | HOSE ASSEMBLY PNEUMATIC, HIGH PRESSURE | 1 | |
| IR429 | PNUEMATIC RECIPROCATING SAW | 1 | |
| IRIS 2000 | Automatic Test Equipment System | 1 | |
| ITS8RSATP2CQ | PNEUMATIC SCREW GUN | 1 | |
| J-AXLE-PHA | AIRCRAFT TIRE SLAVE KIT FOR DRIVING J-AXLE PNEUMATIC AIRCRAFT AXLE JACKS WITH NITROGEN FROM USED AIRCRAFT TIRES | 2 | |
| J-AXLE60AHPA | AXLE JACK 60 T (66 US SHORT TONS) HPA WITH PNEUMATIC SUPPORT AND HANDPUMP J-AXLE60AHPA | 1 | |
| J100TDGD | Pneumatic Oil Pump Kit With Digital Gun | 1 | |
| J21009-1 | SAMPLER AIR PNEUMATI | 1 | |
| J21009-33 | Air Sampler, Aircraft Pnematic System | 1 | |
| J21009-48 | AIR SAMPLER, AIRCRAFT PNEUMATIC SYSTEM | 4 | |
| J24015-34 | Pneumatic hose | 1 | |
| J25009-1 | AIR FLOW REGULATOR - PNEUMATIC PRESSURE TEST, OFFWING ESCAPE SLIDE | 6 | |
| J25016-1 | PNEUMATIC PRESSURE TEST, OFF-WING ESCAPE SLIDE | 3 | |
| J28010-139 | PNEUMATIC LOW PRESSURE DRY AIR TEST KIT | 3 | |
| J3-151 | TIRE COVERS (no wheelpant faring) (specify material type) (set of 2) | 1 | |
| J30002-1 | ADAPTER CABLE - PMAT(PORTABLE MAINTENANCE ACCESS TERMINAL) TO RJ-45 | 1 | |
| J32095-1 | SPL-6313 GAUGE - MISMATCH | 5 | |
| J38001-18 | PNEUMATIC ASSY | 1 | |
| J382P06 | COUPLING TUBE WELDING 0.5625-18DIAMETER UNJF-3A THREADS/MATERIAL AMS 5645 | 1 | |
| J45001-12 | PMAT PORT ADAPTER CABLE | 1 | |
| J45002-1 | ADAPTER CABLE - PMAT TO RJ-45 | 2 | |
| J56001-1 | Protective Cover - Material | 10 | |
| J71009-68 | EQUIPMENT-BOOTSTARP, TRENT 800 ENGINE ( PNEUMATIC DRIVEN WORM GEAR HOIST ) | 9 | |
| J71032-1 | MAT - PROTECTIVE, ENGINE INLET, GE, PW AND RR | 8 | |
| J71032-11 | MAT - PROTECTIVE, ENGINE INLET, GE, PW AND RR | 6 | |
| J71032-15 | MAT - PROTECTIVE, ENGINE INLET, GENERAL ELECTRIC, PRATT & WHITNEY AND ROLLS ROYCE | 10 | |
| J71032-19 | MAT - PROTECTIVE, ENGINE INLET, GEnx | 5 | |
| J71032-2 | MAT - PROTECTIVE, ENGINE INLET, GE, PW AND RR | 4 | |
| JAMTV360N2 | 12 PNEUMATIC WHEEL ON AXLEX 30X60 | 1 | |
| JAT12680 | JIFFY® 7/32" Socket for Pneumatic Installation Tools | 1 | |
| JAT12687 | JIFFY® 1/4" Socket for Pneumatic Installation Tools | 1 | |
| JAT12693 | JIFFY® 9/32" Socket for Pneumatic Installation Tools | 1 | |
| JAT12700 | JIFFY® 5/16" Socket for Pneumatic Installation Tools | 1 | |
| JAT12706 | JIFFY® 11/32" Socket for Pneumatic Installation Tools | 1 | |
| JAT12713 | JIFFY® 1/16" Hex Wrench Tip for Pneumatic Installation Tools - 1st Generation Design for Older Tools | 1 | |
| JAT12768 | JIFFY® 3/8" Socket for Pneumatic Installation Tools | 1 | |
| JAT12775 | JIFFY® 5/64" Hex Wrench Tip for Pneumatic Installation Tools - 1st Generation Design for Older Tools. | 1 | |
| JAT12908 | JIFFY® 3/32" Hex Wrench Tip for Pneumatic Installation Tools - 1st Generation Design for Older Tools | 1 | |
| JAT13635 | JIFFY® 1/8" Hex Wrench Tip for Pneumatic Installation Tools - 1st Generation Design for Older Tools | 1 | |
| JAT18128 | JIFFY® 1/16" Hex Wrench Tip for Pneumatic Installation Tools - NEW & IMPROVED 2nd GENERATION DESIGN! | 1 | |
| JAT18135 | JIFFY® 5/64" Hex Wrench Tip for Pneumatic Installation Tools - NEW & IMPROVED 2nd GENERATION DESIGN! | 1 | |
| JAT18142 | JIFFY® 3/32" Hex Wrench Tip for Pneumatic Installation Tools - NEW & IMPROVED 2nd GENERATION DESIGN! | 1 | |
| JAT18149 | JIFFY® 1/8" Hex Wrench Tip for Pneumatic Installation Tools - NEW & IMPROVED 2nd GENERATION DESIGN! | 1 | |
| JBT 5000 SERIES | PNEUMATIC STATION | 1 | |
| JEVAC | Pneumatic Evacuation Unit (Drainers) | 1 | |
| JHW7-1XS | 1" IMPACT SOCKET SET / GENERIC MATERIAL | 1 | |
| JHWC-80A | HEAVY DUTY ALIGNMENT WRENCH, 3/4IN SIZE, 7/8IN TIP WIDTH, 24IN LENGTH / GENERIC MATERIAL | 1 | |
| JKRR40W55 | TOP MAT KRSC | 1 | |
| JKRR46GW55 | TOP MAT KRSC | 1 | |
| JMP/KYOTO/D/6777/C200 | - CONTAINMENT MAT P/N. | 1 | |
| JPOD030 | PNEUMATIC OIL DISPENSER | 1 | |
| JPOD065 | PNEUMATIC OIL DISPENSER / 65 Litre | 1 | |
| JSG-0822 | PNEUMATIC RECIPROCATING SAW | 1 | |
| JSM-213 | Economy Pneumatic Nibbler (Capacity (steel): -) (Overall length: -) (Description: Replacement Punch) (Add to cart: Add To Cart) (Capacity (steel): -) (Overall length: -) (Description: Replacement Die) (Add to cart: Add To Cart) (Capacity (steel): 18 Gauge | 1 | |
| K-2013 | Kit, Pneumatic Pump | 5 | |
| K-3000 | COMPOSITE MATERIAL REPAIR TOOL KIT | 1 | |
| K127-2 | MATRIX FOR PINNING PLIERS | 11 | |
| K181 | MATRIX FOR PINNING PLIERS | 5 | |
| K2013 | PNEUMATIC PUMP KIT | 5 | |
| K2029 | KIT, DUMP COUPLING WITH 5 FT (1.524 M) LONG HOSE, (MATES WITH K2412) | 8 | |
| K25100Z | MATIC PRESSURE REGULATOR MODEL K25100Z | 1 | |
| K26001-1 | VOIR JOBBOSS POUR PLUS DINFORMATIONS | 5 | |
| K32020-4 | VOIR JOBBOSS POUR PLUS DINFORMATIONS | 3 | |
| K673 | MATRIX FOR PINNING PLIERS | 8 | |
| K71002-151 | Bootstrap System- GE engine(pneumatic hoists) | 1 | |
| K818-1 | MATRIX FOR PINNING PLIERS | 3 | |
| K90590 | AUTOMATIC POTENTIOMETRIC TITRATOR, 230V 50HZ | 1 | |
| KABGMERN602A | 5PC MATTE BLK LWR BDY GDS | 1 | |
| KADGE20MBLK | MATTE BLACK 20IN EPIQ DRW GUAR | 1 | |
| KADGE30MBLK | MATTE BLK 30IN EPIQ DRW GUARD | 1 | |
| KADGE38MBLK | MATTE BLK 38IN EPIQ DRW GUARD | 1 | |
| KADGE54MBLK | MATTE BLK 54IN EPIQ DRW GUARD | 1 | |
| KADGE62MBLK | MATTE BLK 62IN EPIQ DRW GUARD | 1 | |
| KADPE20MBLK | MATTE BLK 20IN EPIQ DRW PRTCTR | 1 | |
| KADPE30MBLK | MATTE BLK 30IN EPIQ DRW PRTCTR | 1 | |
| KADPE38MBLK | MATTE BLK 38IN EPIQ DRW PRTCTR | 1 | |
| KADPE54MBLK | MATTE BLK 54IN EPIQ DRW PRTCTR | 1 | |
| KADPE62MBLK | MATTE BLK 62IN EPIQ DRW PRTCTR | 1 | |
| KAKEEN361ADGMBLK | 7 PC DRWR GRD SET MATTE BLACK | 1 | |
| KAKEEN361ADPMBLK | 5 PC DRWR PRTCTR SET MAT BLK | 1 | |
| KAKEEP361ADGMBLK | 5 PC DRWR GRD SET MATTE BLACK | 1 | |
| KAKEEP361ADPMBLK | 6 PC DRWR PRTCTR SET MAT BLK | 1 | |
| KAKERN681ADGMBLK | 7 PC DRWR GRD SET MATTE BLACK | 1 | |
| KAKERN681ADPMBLK | 6 PC DRWR PRTCTR SET MAT BLK | 1 | |
| KAKERN842CDGMBLK | 13 PC DRWR GRD SET MATTE BLACK | 1 | |
| KAKERN842CDPMBLK | 10 PC DRWR PRTCTR SET MATBLK | 1 | |
| KAKERP842CDGPMBLK | 12 PC DRWR GRD SET MATTE BLACK | 1 | |
| KAKERP842CDPMBLK | 10 PC DRWR PRTCTR SET MAT BLK | 1 | |
| KAKESN361ADGMBLK | 6 PC DRWR GRD SET MATTE BLACK | 1 | |
| KAKESN361ADPMBLK | 4 PC DRWR PRTCTR SET MATBLK | 1 | |
| KAKESN602ADGMBLK | 12 PC DRWR GRD SET MATTE BLACK | 1 | |
| KAKESN602ADPMBLK | 8PC DRWR PRTCTR SET MAT BLK | 1 | |
| KAKESN682ADGMBLK | 12 PC DRWR GRD SET MATTE BLACK | 1 | |
| KAKESN682ADPMBLK | 8 PC DRWR PRTCTR SET MAT BLK | 1 | |
| KAKESN842ADGMBLK | 12 PC DRWR GRD SET MATTE BLACK | 1 | |
| KAKESN842ADPMBLK | 8 PC DRWR PRTCTR SET MAT BLK | 1 | |
| KAKESN843ADGMBLK | 18 PC DRWR GRD SET MATTE BLACK | 1 | |
| KAKESN843ADPMBLK | 8 PC DRWR PRTCTR SET MAT BLK | 1 | |
| KAKETN602CDGMBLK | 10 PC DRWR GRD SET MATTE BLACK | 1 | |
| KAKETN602CDPMBLK | 8 PC DRWR PRTCTR SET MAT BLK | 1 | |
| KAKETN682CDGMBLK | 10 PC DRWR GRD SET MATTE BLACK | 1 | |
| KAKETN682CDPMBLK | 8 PC DRWR PRTCTR SET MAT BLK | 1 | |
| KAKETN843CDGMBLK | 16 PC DRWR GRD SET MATTE BLACK | 1 | |
| KAKETN843CDPMBLK | 12 PC DRWR PRTCTR SET MAT BLK | 1 | |
| KAKETP682ADGMBLK | 9 PC DRWR GRD SET MATTE BLK | 1 | |
| KAKETP682ADPMBLK | 8 PC DRWR PRTCTR SET MAT BLK | 1 | |
| KAKETP843CDGMBLK | 15 PC DRWR GRD SET MATTE BLACK | 1 | |
| KAKETP843CDPMBLK | 12 PC DRWR GRD SET MAT BLK | 1 | |
| KAKEV68TADGMBLK | 10 PC DRWR GRD SET MATTE BLACK | 1 | |
| KAKEV68TADPMBLK | 8 PC DRWR PRTCTR SET MATBLK | 1 | |
| KAKEXN603CDGMBLK | 20 PC DRWR GRD SET MATTE BLACK | 1 | |
| KAKEXN603CDPMBLK | 11 PC DRWR PRTCTR SET MAT BLK | 1 | |
| KAKEXN724ADGMBLK | 23 PC DRWR GRD SET MATTE BLACK | 1 | |
| KAKEXN724ADPMBLK | 18 PC DRWR PRTCTR SET MAT BLK | 1 | |
| KAKEXN725DDGMBLK | 27 PC DRWR GRD SET MATTE BLACK | 1 | |
| KAKEXN725DDPMBLK | 21 PC DRWR PRTCTR SET MAT BLK | 1 | |
| KAKEXP603ADGMBLK | 16 PC DRWR GRD SET MATTE BLACK | 1 | |
| KAKEXP603ADPMBLK | 13 PC DRWR PRTCTR SET MAT BLK | 1 | |
| KAKEXP724ADGMBLK | 22 PC DRWR GRD SET MATTE BLACK | 1 | |
| KAKEXP724ADPMBLK | 18 PC DRWR PRTCTR SET MAT BLK | 1 | |
| KAKEXP725DDGMBLK | 26 PC DRWR GRD SET MATTE BLACK | 1 | |
| KAKEXP725DDPMBLK | 21 PC DRWR PRTCTR SET MAT BLK | 1 | |
| KAKMP1022ADGMBLK | 10 PC DRWR GRD SET MATTE BLACK | 1 | |
| KAKMP1023DGMBLK | 14 PC DRWR GRD SET MATTE BLACK | 1 | |
| KAKMP1033DGMBLK | 12 PC DRWR GRD SET MATTE BLACK | 1 | |
| KAKRL1033EDGMBLK | 15 PC DRWR GRD SET MATTE BLACK | 1 | |
| KAKRL1056DDGMBLK | 8 PC DRWR GRD SET MATTE BLACK | 1 | |
| KAKRL722CDGMBLK | 9 PC DRWR GRD SET MATTE BLACK | 1 | |
| KAKRL756DDGMBLK | 7 PC DRWR GRD SET MATTE BLACK | 1 | |
| KAKTL1022ADGMBLK | 10 PC DRWR GRD SET MATTE BLACK | 1 | |
| KAKTL1023ADGMBLK | 18 PC DRWR GRD SET MATTE BLACK | 1 | |
| KAP40 | Automatic Positioner Insert | 1 | |
| KAP42 | Automatic Positioner Insert | 1 | |
| KAP43 | Automatic Positioner Insert | 1 | |
| KAVEE001 | SMARTSCAN-FA, KAVEE001OTHER PN REGARDING AUTOMATIC WHEEL INSPECTION | 1 | |
| KBE2703760K | PNEUMATIC SCREWDRIVERS | 1 | |
| KC325-7 | PNEUMATIC DRILL STRAIGHT | 1 | |
| KC340-9 | PNEUMATIC SANDER | 1 | |
| KCA1602 | PRISMATIC LANDING COMPASS | 1 | |
| KCP1422WDN | COM GRN BLKOUT MAT BLK PKG | 1 | |
| KCP1422WDO | COM TAN BLKOUT MAT BLK PKG | 1 | |
| KCP1422WDW | STM GRAY BLKOUT MATTE WHT PKG | 1 | |
| KCP1422WDY | STM GRAY BLKOUT MATTE GRN PKG | 1 | |
| KCP1422WDZ | STM GRAY BLKOUT MATTE ORNG PKG | 1 | |
| KCP1422WEA | COM TAN MATTE WHT FRONT CAP PA | 1 | |
| KIT, POWER SWAGING - STATIONARY AUTOMATIC (1/4 - 3/4 TUBE SIZE) | KIT, POWER SWAGING - STATIONARY AUTOMATIC (1/4 -3/ | 1 | |
| KIT-302 | BANCO PRUEBAS ITCAN NEUMÁTICAS ( KIT 302 ) | 1 | |
| KIT302 | BANCO PRUEBAS ITCAN NEUMÁTICAS ( KIT 302 ) | 1 | |
| KJP2422WEA | TAN/MATT/WHT DRW FRT/JPN PWR | 1 | |
| KLA14 | PNEUMATIC GRINDER | 1 | |
| KNR2000 | "PNEUMATIC INSTALLATION & REMOVAL TOOL FOR HEX-BODY FASTENERS | 1 | |
| KPE19212417 | PNEUMATIC WORKSHOP INSTALLATIONS | 1 | |
| KPT-71 | 13 MM HAVALI MATKAP;1/2"REVESIBLE DRILL | 1 | |
| KRA4114FWDK | STM GRAY BLK MATTE GREEN PKG | 1 | |
| KRA4114FWDL | STM GRAY BLK MATTE ORANGE PKG | 1 | |
| KRA4114FWDN | COMBAT GRN BLK MATTE BLK PKG | 1 | |
| KRA4114FWDO | COMBAT TAN BLK MATTE BLK PKG | 1 | |
| KRA4114FWDX | COMBAT TAN BLK MATTE WHITE PKG | 1 | |
| KS-50A | SIERRA VERTICAL PARA CORTE DE MATERIAL | 1 | |
| KTH-2208 | CRIMP DIE SET – HEX DIE SET - MATERIAL : ALLOY STEEL | 4 | |
| KW010 | PNEUMATIC TOOL | 1 | |
| KW020 | PNEUMATIC TOOL (SPECIFY 6MM) | 1 | |
| L-544919 | LOCK BENDERS, PNEUMATIC LPT DISK AND BLADES ASSY 8TH AND PTH STAGE | 1 | |
| L-544943 | LOCK BENDERS, PNEUMATIC LPT DISK AND BLADES ASSY 8TH AND PTH STAGE | 1 | |
| L11-500 | TIRE COVERS (no wheelpant faring) (specify material type) (set of 2) | 1 | |
| L1B51050AE05000 | ATEC 1 Avionics Automate Test Equipment / ATE | 1 | |
| L300-140 | NOSE WHEELPANT/STRUT COVER (specify material type) | 1 | |
| L60T10 | PNEUMATIC GUN | 1 | |
| L72 BLOCK | British Aerospace test block. Material: 2024-T3 Aluminum .128: thick. Includes Test Report and Certificate of Conformance. | 1 | |
| L85T10 | PNEUMATIC GUN | 1 | |
| LA8L20203HM0100 | PMAT KIT-PORTABLE MAINTENANCE ACCESS | 1 | |
| LAN-J71032-11 | MAT PROTECTIVE ENGINE INLET (NO MUA) | 1 | |
| LASV10W-PD | PNEUMATIC DOOR LASV10W | 1 | |
| LB-722 | AUTOMATIC STRIPPING PLIERS | 3 | |
| LB722 | AUTOMATIC STRIPPING PLIERS | 3 | |
| LBB16-EP-033 | PNEUMATIC DRILL – PISTOL | 1 | |
| LBB16EPX-033 | DRILL, PNEUMATIC HANDHELD, PISTOL GRIP MODEL | 2 | |
| LBB16S | PNUEMATIC DRILL | 1 | |
| LBB16S038 | PERCEUSE PNEUMATIQUE ATLAS COPCO (NUT RUNNER MODEL LBB 16 S038) | 1 | |
| LBB26EPX-033-U | PNEUMATIC DRILL, PISTOL TYPE OR | 1 | |
| LBB26EPX033 | PISTOL - GRIP PNEUMATIC DRILL | 1 | |
| LBB45H006U | PISTOL PMEUMATIC DRILL | 1 | |
| LBV16 018-11 | 90º PNEUMATIC DRILL (ATLAS COPCO - LBV16 018-11) | 1 | |
| LBV16 032-S92 | 8421 0110 02 PNOMATIK MATKAP P.90 | 1 | |
| LBV16032-91 | DRILL PNEUMATIC, 90 DEGREE | 2 | |
| LEVELING BAR | 24 INCHES LONG BY APPROXIMATELY 2 INCHES HIGH BY APPROXIMATELY 2 INCHES WIDE. (MUST BE LEVEL ON ALL SIDES). () | 1 | |
| LMT00132 | BARS, PRECISION MATCHED PARALLEL | 1 | |
| LN-RB-55UPN-BC1 | LN-RB-55UPN-BC1;LN Rb SA.55 Ultimate PN Bronze Care - 1Yr - Up to 3Yr Duration | 1 | |
| LN-RB-55UPNADEV-BC1 | LN-RB-55UPNADEV-BC1;LN Rb SA.55 Ultimate PN w/ADEV Bronze Care - 1Yr - Up to 3Yr Duration | 1 | |
| LPA 3 | PORTABLE AUTOMATIC PARTICLE COUNTER | 1 | |
| LPA30PS101 | PORTABLE AUTOMATIC PARTICLE COUNTER | 1 | |
| LS125-3000 | LIBERTY PNEUMATICS HYDRAULIC LIQUID FILLED PRESSUR | 1 | |
| LS125-3000 | Liberty Pneumatics Hydraulic Liquid Filled Pressure Gauge 0-3000 PSI | 1 | |
| LST52592 | V BLOCKS(2)ANDCLAMPS(MATCHPAIR | 1 | |
| LSW500-IND | APC LINE-R 500 VA AUTOMATIC VOLTAGE REGULATOR | 1 | |
| LSW7075 | 8 STEP BLOCK - 2 UNIT - AL BLOCK CONSIST OF 8 DIFFERENT THICKNESS (1MM, 2MM, 3MM, 4MM, 5MM, 6MM, 7MM, 8MM)AS BELOW. - MATERIAL AL2024 | 1 | |
| LT45 | METER - LIGHT, HANDHELD (LITEMATE III PHOTOMETER) | 1 | |
| LTC1030PN | PNEUMATICALLY DRIVEN INJECTION VACUUM BLASTING MACHINE | 1 | |
| LTC52080 | SAFETY PIN FOR PNEUMATIC ASSY | 1 | |
| LTV009R11-6-200B | PNEUMATIC SCREWDRIVER [LTV 009 R11-6-200B] | 1 | |
| LTV28 R28-120 | NUTRUNNER - ANGLE, PNEUMATIC DRIVE (120-252 IN-LBS) | 1 | |
| LTV28 RL28-10 | NUTRUNNER - ANGLE, PNEUMATIC DRIVE (120-252 IN-LBS) | 1 | |
| LTV38 R50-175-ATEX | NUTRUNNER - ANGLE, PNEUMATIC DRIVE (190-400 IN-LBS) | 1 | |
| LTV38 R65-ATEX | NUTRUNNER - ANGLE, PNEUMATIC DRIVE (240-576 IN-LBS) | 1 | |
| LTV38 R70-140-ATEX | NUTRUNNER - ANGLE, PNEUMATIC DRIVE (240-576 IN-LBS) | 1 | |
| LUB30-807 | GREASE GUN KIT,PNEUMATIC;|SNAPLOCK - PISTOL GREASE GUN; | 1 | |
| LUMAX-PNEUMATIC-3000PSI-14OZ | PNEUMATIC GUN MAX 3000 PSI | 1 | |
| LX-1160 | PNEUMATIC GUN MAX 3000 PSI | 1 | |
| M-7950-93 | COUPLING - PNEUMATIC GSE SUPPLY SOURCE, QUICK DISCONNECT. | 1 | |
| M-GUNW | AUTOMATIC SPRAY GUN CLEANER | 1 | |
| M037 | MAXIMATOR PUMP | 1 | |
| M0DEL 111B | 0XYGEN ANALYZER, P0RTABLE, BATTERY 0PERATED, ACCEPTABLE F0R USE IN CLASS I, DIVISI0N II AREAS. INCLUDES H0SE/FITTING T0 MATE WITH B0EING AIRPLANE NITR0GEN GENERATI0N SYSTEM 0XYGEN TEST PORT | 1 | |
| M110 | POMPE *HASKEL*MAXIMATOR* | 4 | |
| M201-505 | MAIN WHEEL COVERS (no wheelpant faring) (specify material type) (set of 2) | 1 | |
| M22520-23-01 | 787 PNUEMATIC CRIMP TOOL | 5 | |
| M22520/1-02 | MATRIX FOR PINNING PLIERS | 18 | |
| M22520/1-12 | MATRIX FOR PINNING PLIERS | 1 | |
| M22520/1-13 | MATRIX FOR PINNING PLIERS | 4 | |
| M22520/1-14 | MATRIX FOR PINNING PLIERS | 1 | |
| M22520/2-02 | MATRIX FOR PINNING PLIERS | 11 | |
| M22520/2-06 | MATRIX FOR PINNING PLIERS | 10 | |
| M22520/2-07 | MATRIX FOR PINNING PLIERS | 10 | |
| M22520/2-09 | MATRIX FOR PINNING PLIERS | 6 | |
| M22520/2-10 | MATRIX FOR PINNING PLIERS | 7 | |
| M22520/2-23 | MATRIX FOR PINNING PLIERS | 7 | |
| M22520/23-01 | PNEUMATIC CRIMP TOOL | 5 | |
| M22520/5-05 | CRIMPING WRENCH WITH MATRIX | 2 | |
| M320 | Crimp Tool for Siemens Industrial AUtomation Contacts, 6FX2003 Series | 2 | |
| M346 SPAR 4 STD-1 | CUSTOM REFERENCE STANDARD, H346 SPAR 4 STD-1 HOLE INTERFACE WITH FLAPS HINGE REWORK. MATERIAL: 7050-T7451 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| M36-001 | BANCO PRUEBAS ITCAN NEUMÁTICAS ( KIT 302 ) | 1 | |
| M65724238 | PNEUMATIC SUPPLY INTERFACE (NP) OPT TO M82000228 | 1 | |
| M7950-93-S3 | PNEUMATIC JET STARTER HOSE | 5 | |
| M7950-93S3 | PNEUMATIC JET STARTER HOSE | 5 | |
| MA350001-1 | TEST SET,PNEUMATIC SYSTEM COMPONENTS | 1 | |
| MA8157-10 | PNEUMATIC HOIST GENX 6TON | 1 | |
| MA8158-10 | PNEUMATIC HOIST GENX 3TON | 1 | |
| MAC-1 | AIR MOVER, PNEUMATIC 8 INCH | 1 | |
| MAGMAT | HIGH POWER MAGNETIC MAT | 1 | |
| MAGMATG | HI PWR MAGNETIC MAT 8X11 GREEN | 1 | |
| MAGMATR | HI PWR MAGNETIC MAT 8X11 RED | 1 | |
| MAGMATXL | HIGH POWER MAGNETIC MAT 5X24 | 1 | |
| MAGMATXLG | HIGH POWER MAG MAT 5X24 GREEN | 1 | |
| MAGMATXLHV | HIGH POWER MAG MAT 5X24 HI VIS | 1 | |
| MAGMATXLR | HIGH POWER MAG MAT 5X24 RED | 1 | |
| MAGMICROG | HI PWR MAGNETIC MAT 2X2 GREEN | 1 | |
| MAGMICROHV | HIPWR MAG MAT 2X2 HIVIZ YELLOW | 1 | |
| MAGMICROR | HI POWER MAGNETIC MAT 2X2 RED | 1 | |
| MAGMINIG | HI PWR MAG MAT 4.5X4.5 GREEN | 1 | |
| MAGMINIR | HIGH POWR MAGNETIC MAT 4.5IN X | 1 | |
| MANO | VALISE POUR MATERIEL DE SERTISSAGE | 1 | |
| MAT-ULT-183 | MAT/ULT/TP183 - BLOCK, CALIBRATION TEST | 2 | |
| MAT/ULT/183 | MAT/ULT/TP183 - BLOCK, CALIBRATION TEST | 2 | |
| MAT05MV.01857 | JACK,TRIPOD-MAT5MV | 1 | |
| MAT13PK | 5-PK KNEEL MAT | 1 | |
| MAT19PK | 5-PK KNEEL MAT | 1 | |
| MAT38PK | 5-PK CREEPER MAT | 1 | |
| MAT54X33 | FOLDING CREEPER MAT 54X33 | 1 | |
| MATULT183 | MAT/ULT/TP183 - BLOCK, CALIBRATION TEST | 2 | |
| MAV-1 | AIRCRAFT FUEL TANK VENTILATION KIT, PNEUMATIC DRIVEN | 1 | |
| MAV-LC | PNEUMATIC DRIVEN VENTILATOR | 1 | |
| MG1200 | WRENCH PNEUMATIC IMPACT HEAVY DUTY 3/4" | 1 | |
| MG3255L98 | SNAP-ON PNEUMATIC IMPACT WRENCH | 1 | |
| MHF-40 | AXLE JACK TYPE AIR PNEUMATIC 40TON - MLG | 1 | |
| MHP15 | TOOL — NLG HYDRO PNEUMATIC JACK | 1 | |
| MIL-B-121 | BARRIER MATERIAL TYPE II GRADE A, CLASS 2 | 1 | |
| MIL-DTL-26666 | HOSE ASSEMBLY PNEUMATIC, HIGH PRESSURE | 1 | |
| MIL-H-87944-01 | PNEUMATIC HIGH PRESSURE HOSE | 1 | |
| MIL-H-87944-10 | A332 PNEUMATIC HIGH PRESS' HOSE | 1 | |
| MIL-PRF-131K | CLASS 1 BARRIER MATERIALS, WATERVAPORPROOF, | 1 | |
| MINILIFT | HOIST - FISHPOLE MIN 500 LB CAPACITY & 40 FT CABLE & LOAD LIMITER (MANUAL AND PNEUMATIC DRIVE) | 1 | |
| MIRKA SANDER | PNEUMATIC SANDER PROS 150MM | 1 | |
| MIT65B89601 | BLANKING PLATE - PNEUMATIC DUCT RB211-524 | 1 | |
| MIT65B90114 | PLUG - PNEUMATIC CHECK VALVE REPLACEMENT | 1 | |
| ML500K | PNEUMATIC HOIST | 1 | |
| ML640050600 | CRIMP HEAD FOR THE AT-200 PNEUMATIC TOOL | 1 | |
| MM-AS81012 | AUTOMATIC STRIPPERS: 8-10-12 AWG | 1 | |
| MME-PD459 | INFLATOR-GAGE, PNEUMATIC TIRE | 1 | |
| MODEL 111B | OXYGEN ANALYZER, PORTABLE, BATTERY OPERATED, ACCEPTABLE FOR USE IN CLASS I, DIVISION II AREAS. INCLUDES HOSE/FITTING TO MATE WITH BOEING AIRPLANE NITROGEN GENERATION SYSTEM OXYGEN TEST PORT. | 1 | |
| MODEL 244 | (PNEUMATIC TOOLS) | 2 | |
| MODEL 2440S | PNEUMATIC TOOL (HUCK) | 1 | |
| MODEL 244OSX | PNEUMATIC TOOLS | 1 | |
| MODEL 244X | PNEUMATIC TOOLS | 1 | |
| MODEL 250 | SEALANT GUN, PNEUMATIC | 3 | |
| MODEL 3000 CS | PNEUMATIC RIVET MACHINE | 1 | |
| MODEL 400 | PNEUMATIC HAMMER GUN (APT, GARDENA GA) | 1 | |
| MODEL 500-D | PNEUMATIC CRIMP TOOL | 1 | |
| MODEL 6250-W | AUTOMATED PITOT STATIC TESTER | 1 | |
| MODEL 966A1 | MICROMETER - OPTICAL, (UNIVERSAL KIT) CONTAINS EQUIPMENT FOR BOTH MODEL 966 (100 POWER, DEPTHS MEASUREMENT UP TO 0.6650", HEIGHT ABOVE SURFACE 0.100", TRANSPARENT MATERIAL UP TO 0.9975'', AND ACCURACY /-.0005") AND MODEL 966A (200 POWER, DEPTHS MEASUREME | 4 | |
| MODEL BV-101-P | PNEUMATIC BENCH VISE | 1 | |
| MODEL1162 | GREASE GUN PNEUMATIC | 1 | |
| MODEL244 | PNEUMATIC TOOLS | 2 | |
| MOSX-C1116XCCB0-M100-MFA | MOSX-C1116XCCB0-M100-MFA;16 PORT COMMON CONNECTION SMF OPTICAL MATRIX SWITCH FC/APC BULKHEAD | 1 | |
| MOSX-C1116XCCB0-M100-MFP | MOSX-C1116XCCB0-M100-MFP;16 PORT COMMON CONNECTION SMF OPTICAL MATRIX SWITCH FC/PC BULKHEAD | 1 | |
| MOSX-C1116XCCB0-M100-MLC | MOSX-C1116XCCB0-M100-MLC;16 PORT COMMON CONNECTION SMF OPTICAL MATRIX SWITCH LC/PC BULKHEAD | 1 | |
| MOSX-C1116XCCB0-M100-MLU | MOSX-C1116XCCB0-M100-MLU;16 PORT COMMON CONNECTION SMF OPTICAL MATRIX SWITCH LC/APC BULKHEAD | 1 | |
| MOSX-C1116XCCB0-M100-MSC | MOSX-C1116XCCB0-M100-MSC;16 PORT COMMON CONNECTION SMF OPTICAL MATRIX SWITCH SC/PC BULKHEAD | 1 | |
| MOSX-C1116XCCB0-M100-MSU | MOSX-C1116XCCB0-M100-MSU;16 PORT COMMON CONNECTION SMF OPTICAL MATRIX SWITCH SC/APC BULKHEAD | 1 | |
| MOSX-C1132XCCB0-M100-MLC | MOSX-C1132XCCB0-M100-MLC;32 PORT COMMON CONNECTION SMF OPTICAL MATRIX SWITCH LC/PC BULKHEAD | 1 | |
| MOSX-C1132XCCB0-M100-MLU | MOSX-C1132XCCB0-M100-MLU;32 PORT COMMON CONNECTION SMF OPTICAL MATRIX SWITCH LC/APC BULKHEAD | 1 | |
| MOSX-C1148XCCB0-M100-MLC | MOSX-C1148XCCB0-M100-MLC;48 PORT COMMON CONNECTION SMF OPTICAL MATRIX SWITCH LC/PC BULKHEAD | 1 | |
| MOSX-C1148XCCB0-M100-MLU | MOSX-C1148XCCB0-M100-MLU;48 PORT COMMON CONNECTION SMF OPTICAL MATRIX SWITCH LC/APC BULKHEAD | 1 | |
| MP-OS004 | MP-OS004;OBJECTIVE 4X ACHROMATIC DIN | 1 | |
| MP-OS010 | MP-OS010;OBJECTIVE 10X ACHROMATIC DIN | 1 | |
| MP30 Deltascope | MP30 Deltascope - Deltascope, Ability to calibrate on a coating of unknown thickness (for magnetic induction method only), Automatic probe recognition | 1 | |
| MP300OL-06AA | PNEUMATIC TOOL ASSY | 1 | |
| MP300OL-06AAY | PNEUMATIC TOOL ASSY | 1 | |
| MP300OL-08AA | PNEUMATIC TOOL ASSY | 1 | |
| MP300OL-08AAY | PNEUMATIC TOOL ASSY | 1 | |
| MP300OL-10AA | PNEUMATIC TOOL ASSY | 1 | |
| MP300OL-10AAX | PNEUMATIC TOOL ASSY | 1 | |
| MP300OL-10AAY | PNEUMATIC TOOL ASSY | 1 | |
| MP300OL-12AA | PNEUMATIC TOOL ASSY | 1 | |
| MP300OL-12AAX | PNEUMATIC TOOL ASSY | 1 | |
| MP300OL-12AAY | PNEUMATIC TOOL ASSY | 1 | |
| MP55 | PNEUMATIC PISTOL | 1 | |
| MP550 | PNEUMATIC PISTOL | 1 | |
| MP550BF | PNEUMATIC MOTOR ASSEMBLY | 1 | |
| MP550BF3-10AA | PNEUMATIC COMPOSI-LOK INSTALL TOOL | 1 | |
| MP550BF3-6AA | PNEUMATIC GUN COMPLETE ASSEMBLY 3/16 | 1 | |
| MP550BF3-8AA | PNEUMATIC GUN COMPLETE ASSEMBLY 1/4 | 1 | |
| MP550BFDN-10AA | PNEUMATIC TOOL | 1 | |
| MP550BFDN-5AA | PNEUMATIC TOOL ASSY | 3 | |
| MP550BFDN-6AA | COMPLETE PNEUMATIC TOOL ASSEMBLY - 3/16 | 1 | |
| MP550BFDN-7AA | PNEUMATIC PISTOL TOOL ASSEMBLY | 1 | |
| MP550BFDN5AA | PNEUMATIC TOOL ASSY | 3 | |
| MP550BFDN6AA | PNEUMATIC TOOL | 1 | |
| MP550BFP8AA | COMPLETE PNEUMATIC TOOL ASSEMBLY - 1/4 | 1 | |
| MP550BFR-5AA | INSTALL TOOL - PNEUMATIC PISTOL GRIP | 1 | |
| MP550BFR-6AA | INSTALL TOOL - PNEUMATIC PISTOL GRIP | 1 | |
| MP550BFVDN-5AA | INSTALL TOOL - PNEUMATIC PISTOL GRIP | 1 | |
| MP550BFVEDN-5AA | INSTALL TOOL - PNEUMATIC PISTOL GRIP | 1 | |
| MP550BFVEDN-6AA | INSTALL TOOL - PNEUMATIC PISTOL GRIP | 1 | |
| MP550OL | PNEUMATIC GUN SET | 1 | |
| MP550OL-06AA | COMPLETE PNEUMATIC TOOL ASSEMBLY (PG INSTALL TOOL) | 2 | |
| MP550OL-08AA | PNEUMATIC TOOL ASSY | 1 | |
| MP550P-5AA | INSTALL TOOL - PNEUMATIC PISTOL GRIP | 1 | |
| MP550RL-12AA | PNEUMATIC TOOL ASSY | 1 | |
| MPBF05 | PHEUMATIC PISTOL | 1 | |
| MPI-WS15-2 | WING ACCESS STAND 1)WATER PROOF LIGHTING 2) ELECTRICLA CONNETORS PER STAND 3)PNUEMATIC CONNETION | 1 | |
| MPS 43B | COMPACT AUTOMATIC AIR DATA TEST SET – 1 PC. | 3 | |
| MPS-24 | Marchiori Air Data Test System MPS 24 30 1x PMAT2000 Data loader including cables Airbus and software | 1 | |
| MPS-30 | Marchiori Air Data Test System MPS 24 30 1x PMAT2000 Data loader including cables Airbus and software | 3 | |
| MPS-30 & MPS-24 HANDTERMINAL | Marchiori Air Data Test System MPS 24 30 1x PMAT2000 Data loader including cables Airbus and software | 1 | |
| MPS-34C | Air Data Test, 4xPs 4xPt, Automated, RVSM Digital | 3 | |
| MPS-43 | Compact Automatic Air Data Test Set | 4 | |
| MPS34C | DMAAero Air Data Test, 4xPs 4xPt, Automated, RVSM Digital | 3 | |
| MPS43 | Ultra Compact Automatic Air Data Test Set | 4 | |
| MPS43 K0 F3 K0 | ULTRA COMPACT AUTOMATIC AIR DATA TEST SET (DA 40NG) | 1 | |
| MPS43B | COMPACT AUTOMATIC AIR DATA TEST SET | 3 | |
| MPS43K0F3K0 | ULTRA COMPACT AUTOMATIC AIR DATA TEST SET DA 40NG | 1 | |
| MR550 | PNEUMATIC RIGHT ANGLE TOOL | 1 | |
| MR550BFDN-5AA | COMPLETE PNEUMATIC TOOL ASSEMBLY | 2 | |
| MR550BFDN-7AA | PNEUMATIC RIGHT ANGLE TOOL ASSEMBLY | 1 | |
| MR550P-5AA | INSTALL TOOL - PNEUMATIC RIGHT ANGLE | 1 | |
| MRC550 | PNEUMATIC CLOSE QUARTER POWER TOOL | 1 | |
| MRC550BFDN-7AA | PNEUMATIC CLOSE QURTER POWER TOOL ASSEMBLY | 1 | |
| MRC550BFR-5AA | INSTALL TOOL - PNEUMATIC RIGHT ANGLE CLOSE QUARTER | 1 | |
| MRC550BFR-6AA | INSTALL TOOL - PNEUMATIC RIGHT ANGLE CLOSE QUARTER | 1 | |
| MRC550DN-5AA | INSTALL TOOL - PNEUMATIC RIGHT ANGLE CLOSE QUARTER | 1 | |
| MRCR250BFDN-7AA | PNEUMATIC CLOSE QURTER RATCHET TOOL ASSEMBLY | 1 | |
| MRG-2 | WRENCH GEAR PNEUMATIC RIGHT ANGLE TOOL | 1 | |
| MRH-2 | HOOD PNEUMATIC RIGHT ANGLE TOOL | 1 | |
| MRT550 | PNUEMATIC RIGHT ANGLE | 1 | |
| MRT550BFDN-6AA | PNEUMATIC PISTOL | 1 | |
| MRT550BFDN-7AA | PNEUMATIC RIGHT ANGLE TORQUE RESPONSIVE TOOL ASSEMBLY | 1 | |
| MRT550BFR-5AA | INSTALL TOOL - PNEUMATIC RIGHT ANGLE | 1 | |
| MRT550BFR-6AA | INSTALL TOOL - PNEUMATIC RIGHT ANGLE | 1 | |
| MRT550DN-5AA | INSTALL TOOL - PNEUMATIC RIGHT ANGLE | 1 | |
| MRT550DRN-5AA | INSTALL TOOL - PNEUMATIC RIGHT ANGLE | 1 | |
| MS20253P1-200 | NON-THREADED, STAINLESS STEEL, CHROMATE PIN, FOR AIRCRAFT. | 1 | |
| MS21902W6 | PNEUMATIC LEAK CHECK, NIPPLE | 6 | |
| MS21916V12-4P | UNION ASSY FOR PNEUMATIC CONNECTION 11/4 ( AIRCRAFT END SIZE) TO 9/16 (BOTTLE END SIZE) | 1 | |
| MS22520/23-01 | PNEUMATIC INDENT CRIMP TOOL | 1 | |
| MS27404-3D | EXPENDABLE MATERIAL | 2 | |
| MS28889-1 | VALVE, PNEUMATIC TANK | 4 | |
| MS28889-2 | VALVE,PNEUMATIC TANK | 14 | |
| MST2-176-180-XNGL | Bojo Tools MST2-176-180-XNGL Black Extreme Material Composite Micro Scraper Tool | 1 | |
| MST2-176-183-XNGL | Bojo Tools MST2-176-183-XNGL Black Extreme Material Composite Micro Scraper Tool | 1 | |
| MST2-177-179-XNGL | Bojo Tools MST2-177-179-XNGL Black Extreme Material Composite Micro Scraper Tool | 1 | |
| MST2-190-178-XNGL | Bojo Tools MST2-190-178-XNGL Black Extreme Material Composite Micro Scraper Tool | 1 | |
| MST2-3KIT-XNGL | Bojo Tools MST2-3KIT-XNGL Black Extreme Material 3-Piece Composite Micro Angled Tip Scraper Kit | 1 | |
| MST2-3KIT2-XNGL | Bojo Tools MST2-3KIT2-XNGL Black Extreme Material 3-Piece Composite Micro Straight Tip Scraper Kit | 1 | |
| MTI500-197-20 | DIGIMATIC CALIPER 8 | 1 | |
| MTI571-216-10 | DIGIMATIC DEPTH GAGE 0-30 | 1 | |
| MTO-500 | MAIN GEAR WHEELPANT COVERS (specify material type) (set of 2) | 1 | |
| MV 18 SB | MANUAL LEVER PRESS (AUTOMATOR LYO) | 1 | |
| MV11B | AUTOMATOR CRIMPING | 1 | |
| NA2 | AUTOMATIC OPTICAL LEVEL | 1 | |
| NAEF4 | CONNECTOR; PNEUMATIC; CONNECTION FOR HOSE FITTING IN THE AIR DISTRIBUTION BOX OF THE DOAR DATA TEST EQUIPMENT SET; ALUMINUM | CONNECTION | 1 | |
| NAK2 | AUTOMATIC OPTICAL LEVEL | 1 | |
| NBNT-2 | 2-BOTTLE EASY LOAD NITROGEN CART KEY INFORMATION (PRESSURE RANGE: DUAL USE 0-300 PSI AND 0 – 3,300 PSI) | 1 | |
| NCS67029 | MAT, PROTECTIVE NOSE COWL | 2 | |
| NDT 3152- A | BOEING REFERENCE STANDARD 737 PART 6 57-10-55 PAGE 8 FIGURE 2. MATERIAL: 2024-T3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT 3152- F | BOEING REFERENCE STANDARD 737 PART 6 57-10-55 PAGE 8 FIGURE 2. MATERIAL: 2024-T3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT 3152- K | BOEING REFERENCE STANDARD 737 PART 6 57-10-55 PAGE 8 FIGURE 2. MATERIAL: 2024-T3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT 3156 | BOEING REFERENCE STANDARD 737 PART 6 57-10-60 PAGE 11 FIGURE 2. MATERIAL: 2024-T3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 4 | |
| NDT 3164 | BOEING REFERENCE STANDARD 737 PART 6 57-10-60 PAGE 11 FIGURE 2. MATERIAL: 7150-T7. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT 3166- 007 | BOEING REFERENCE STANDARD 737 PART 4 57-10-08 PAGE 6 FIGURE 2. MATERIAL: AIRCRAFT QUALITY ALUMINUM. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 4 | |
| NDT 3170 | BOEING REFERENCE STANDARD 737 PART 4 57-10-06 PAGE 16 FIGURE 2. MATERIAL: AIRCRAFT QUALITY ALUMINUM. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 5 | |
| NDT 3171 | BOEING REFERENCE STANDARD 737 PART 4 57-10-06 PAGE 17 FIGURE 3. MATERIAL: AIRCRAFT QUALITY ALUMINUM. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 5 | |
| NDT 3285 | BOEING REFERENCE STANDARD 737 PART 6 53-30-63 PAGE 11 FIGURE 2. MATERIAL: 7075-T6. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT 3289 | BOEING REFERENCE STANDARD 737 PART 6 53-30-65 PAGE 8 FIGURE 2. MATERIAL: 2024-T3 AND 7075-T6. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT 3293 | BOEING REFERENCE STANDARD 737 PART 6 53-30-65 PAGE 8 FIGURE 2. MATERIAL: 2024-T3 AND 7075-T6. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT 3299 | BOEING REFERENCE STANDARD 737 PART 6 53-30-65 PAGE 8 FIGURE 2. MATERIAL: 2024-T3 AND 7075-T6. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT 396 | BOEING REFERENCE STANDARD 737 PT 6 53-30-09 FIG 2.( NOTE: MATERIAL THICKNESS FOR THIS STANDARD IS .036"/.036"). INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 6 | |
| NDT-102 | Boeing Standard INC 625 customer supplies material | 1 | |
| NDT-1094-110-A | BOEING REFERENCE STANDARD 737 PART 4 53-30-07, 757 PART 4 53-00-02 FIG 2, 777 PART 4 53-00-02 PAGE 34 FIGURE 2. MATERIAL: ALUMINUM. PROCUDURES VARY WITH PLANE MODEL. ALL MODELS FOR THIS REFERENCE STANDARD. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMAN | 2 | |
| NDT-1094-130-A | BOEING REFERENCE STANDARD 737 PART 4 53-30-07, 757 PART 4 53-00-02 FIG 2, 777 PART 4 53-00-02 PAGE 34 FIGURE 2. MATERIAL: ALUMINUM. PROCUDURES VARY WITH PLANE MODEL. ALL MODELS FOR THIS REFERENCE STANDARD. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMAN | 2 | |
| NDT1022 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT1022-27/6 | BOEING REFERENCE STANDARD 767 51-00-14 PT 6 FIG 3, 757 Part 6 51-00-14 Page 8 Figure 3. SINGLE STANDARD WITH ALL SIX HOLES. MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1023 | BOEING REFERENCE STANDARD ALL MODELS PT 6 51-00-00 FIG 16.. MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance... | 2 | |
| NDT1024 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1025 | BOEING REFERENCE STANDARD ALL MODELS PT 6 51-00-00 FIG 16.. MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance... | 2 | |
| NDT1026 | BOEING REFERENCE STANDARD ALL MODELS PT 6 51-00-00 FIG 16.. MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance... | 2 | |
| NDT1027 | BOEING REFERENCE STANDARD ALL MODELS PT 6 51-00-00 FIG 16.. MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. .. | 2 | |
| NDT1031 | BOEING 707 REFERENCE STANDARD 707 PART 6, 57-10-07 DETAIL 2 FIGURE 93 SHEET 7 PG.1525. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1036-P1 | BOEING POSITIONER 707 Part 4 54-40-07 Page 35 Figure 2. Material: Plexiglass or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1036-P2 | BOEING POSITIONER 707 Part 4 54-40-07 Page 35 Figure 2. Material: Plexiglass or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1036-P4 | BOEING POSITIONER 707 Part 4 54-40-07 Page 35 Figure 2. Material: Plexiglass or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1037-0.032 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1037-0.036 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1037-0.040 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1037-0.050 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1037-0.063 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1037-0.072 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1037-0.080 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1037-0.090 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1037-0.100 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1037-0.110 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1037-0.125 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1038 | BOEING REFERENCE STANDARD (ALUMINUM SKIN/CORE DEFECTS) 737/757 PART 4 51-00-05 PAGE 5-7 FIGURE 1. MATERIAL: ANY 2000, 6000,7000 SERIES ALUMINUM, INCLUDES C-SCAN AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT1039-T1/T2 | BOEING STANDARD 737 PT4 51-00-05 PG 7..*T1 & T2 ARE MATERIAL THICKNESS, CUSTOMER MUST PROVIDE THICKNESS DIMENSIONS | 2 | |
| NDT1039-t1/t2 | Boeing Standard 737 PT4 51-00-05 PG 7..*t1 & t2 are material thickness, customer must provide thickness dimensions | 2 | |
| NDT1043CS | BOEING COUNTERSINK REFERENCE STANDARD 737 PT6 51-00-00 PROCEDURE 19, 0.375” DIAMETER 100° COUNTERSINK HOLE. MATERIAL: 43404340M STEEL. SIZE: 2.0" X .375" THICK( ROUNDSQUARE. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| NDT1046-3 | BOEING STANDARD, 777 PT4 51-00-04:PG3 FIG1, 3 PLY, 5" X 3" X1", MATERIAL CERTIFICATE INCLUDED | 1 | |
| NDT1046-8 | BOEING STANDARD, ALL PT9 51-00-01:PG6 FIG1, 8 PLY, MATERIAL CERTIFICATE INCLUDED | 1 | |
| NDT1047 | BOEING 737 REFERENCE STANDARD PART 6 51-00-00 PAGE 5 FIGURE 1. MATERIAL: LOW ALLOY 4000 SERIES STEEL 4130. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT1071 | BOEING REFERENCE STANDARD 767 Part 4 51-00-22 Page 4 Figure 1. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1072 | BOEING REFERENCE STANDARD PT 6, 51-00-00 fig. 13 PG.11 . MATERIAL-301 1/2 HARD. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1073 | BOEING REFERENCE STANDARD Part 6 51-00-00 Page 12 Figure 13. Material:4130 or 4340. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1074 | BOEING REFERENCE STANDARD Part 6 51-00-00 Page 11 Figure 24. Material: 304 1/2 Hard. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1075 | BOEING REFERENCE STANDARD Part 6 51-00-00 Page 14 Figure 13. Material: 301 1/2 Hard. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1083 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1083-.157 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-.5625 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-.630 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0.5620 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0.563 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0.625 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0.630 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0.688 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0.695 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0.750 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 2 | |
| NDT1083-0.787 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0.812 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0.813 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0.875 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0.938 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-1.000 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-1.286 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-1.347 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1084 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-.096 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-.5625 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.09375 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.122 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.125 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.127 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.129 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.156 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 2 | |
| NDT1084-0.157 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.161 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.200 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.218 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.219 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 2 | |
| NDT1084-0.234 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.265 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.281 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.297 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.328 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.359 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.391 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.422 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.453 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.469 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.484 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.531 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.562 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.563 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.578 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.594 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.600 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.625 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 2 | |
| NDT1084-0.630 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.640 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.656 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.675 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.688 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.689 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.695 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.700 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.719 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.750 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 2 | |
| NDT1084-0.787 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.813 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.875 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.906 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.938 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.XXX | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0125 | BOEING REFERENCE STANDARD 737 PART 6 51-00-00 PAGE 9 FIGURE 3, 777 PART 6 51-00-02 PAGE 7 FIGURE 3,777-200/300 PART 6 51-00-02 PAGE 9 FIGURE 3. MATERIAL: 2024-T3. PROCUDURES VARY WITH PLANE MODEL. ALL MODELS FOR THIS REFERENCE STANDARD. PROVIDE CUSTOM | 1 | |
| NDT1084-1.000 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.062 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.100 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.124 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.125 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 2 | |
| NDT1084-1.187 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.200 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.250 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.300 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.312 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.3605 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.375 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 2 | |
| NDT1084-1.400 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.437 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.500 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.625 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 2 | |
| NDT1084-1.750 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.875 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.940 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.9855 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-11.5MM | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-14.4MM | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-14.6MM | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-17.4MM | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-17.5MM | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-2.000 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-2.250 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-27.6MM | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1087-11 | BOEING REFERENCE STANDARD, 757 Part 6 53-00-11. Plate Thickness: Upper 1 - 0.140 / Lower 2 - 0.080. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1087-12 | BOEING REFERENCE STANDARD, 757 Part 6 53-00-11. Plate Thickness: Upper 1 - 0.120 / Lower 2 - 0.063. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1087-13 | BOEING REFERENCE STANDARD, 757 Part 6 53-00-11. Plate Thickness: Upper 1 - 0.140 / Lower 2 - 0.063. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1087-14 | BOEING REFERENCE STANDARD, 757 Part 6 53-00-11. Plate Thickness: Upper 1 - 0.160 / Lower 2 - 0.100. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT1088-050/063 | BOEING REFERENCE STANDARD 737 Part 6 53-30-24 Page 6 Figure 2, 747 Part 6 53-30-17 Page 7 Figure 1, 757 Part 6 53-00-13 Page 6 Figure 2. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and | 1 | |
| NDT1088-062/071 | BOEING REFERENCE STANDARD 737 Part 6 53-30-24 Page 6 Figure 2, 747 Part 6 53-30-17 Page 7 Figure 1, 757 Part 6 53-00-13 Page 6 Figure 2. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and | 1 | |
| NDT1088-072/050 | BOEING REFERENCE STANDARD 737 Part 6 53-30-24 Page 6 Figure 2, 747 Part 6 53-30-17 Page 7 Figure 1, 757 Part 6 53-00-13 Page 6 Figure 2. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and | 4 | |
| NDT1088-095/071 | BOEING REFERENCE STANDARD 737 Part 6 53-30-24 Page 6 Figure 2, 747 Part 6 53-30-17 Page 7 Figure 1, 757 Part 6 53-00-13 Page 6 Figure 2. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and | 1 | |
| NDT1088-112/100 | BOEING REFERENCE STANDARD 737 Part 6 53-30-24 Page 6 Figure 2, 747 Part 6 53-30-17 Page 7 Figure 1, 757 Part 6 53-00-13 Page 6 Figure 2. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and | 2 | |
| NDT1088-133/071 | BOEING REFERENCE STANDARD 737 Part 6 53-30-24 Page 6 Figure 2, 747 Part 6 53-30-17 Page 7 Figure 1, 757 Part 6 53-00-13 Page 6 Figure 2. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and | 1 | |
| NDT1088-144/050 | BOEING REFERENCE STANDARD 737 Part 6 53-30-24 Page 6 Figure 2, 747 Part 6 53-30-17 Page 7 Figure 1, 757 Part 6 53-00-13 Page 6 Figure 2. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and | 3 | |
| NDT1088-156/100 | BOEING REFERENCE STANDARD 737 Part 6 53-30-24 Page 6 Figure 2, 747 Part 6 53-30-17 Page 7 Figure 1, 757 Part 6 53-00-13 Page 6 Figure 2. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and | 1 | |
| NDT1088-180/180 | BOEING REFERENCE STANDARD 737 Part 6 53-30-24 Page 6 Figure 2, 747 Part 6 53-30-17 Page 7 Figure 1, 757 Part 6 53-00-13 Page 6 Figure 2. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and | 1 | |
| NDT1089-.500 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1089-.626 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1089-.750 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1089-0.125 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16,BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø0.125" | 2 | |
| NDT1089-0.157 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø0.157" | 1 | |
| NDT1089-0.563 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance.Hole Ø 0.563" | 1 | |
| NDT1089-0.600 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. HOLE SIZE: 0.600". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1089-0.625 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø 0.625" | 1 | |
| NDT1089-0.626 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø 0.626" | 1 | |
| NDT1089-0.656 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1089-0.660 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1089-0.688 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø 0.688" | 1 | |
| NDT1089-0.750 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø 0.750" | 1 | |
| NDT1089-0.813 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø 0.813" | 1 | |
| NDT1089-0.875 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø 0.875" | 1 | |
| NDT1089-0.938 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø 0.938" | 1 | |
| NDT1089-1.000 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø 1.000" | 1 | |
| NDT1089-1.375 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1089-1.438 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1089-1.500 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1089-1.9855 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16. MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1093-.050/.040 | BOEING REFERENCE STANDARD 737 Part 9 51-00-03 Page 8 Figure 2. Material: 2024-T3 Aluminum .050"/.040" thicknesses. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1093-.071/.056 | BOEING REFERENCE STANDARD 737 Part 9 51-00-03 Page 8 Figure 2. Material: 2024-T3 Aluminum .071"/.056" thicknesses. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1094-040 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-040-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-050 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-050-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-050/010-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 1 | |
| NDT1094-070 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-070-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-090 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-090-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-110 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 1 | |
| NDT1094-110-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-130 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 1 | |
| NDT1094-130-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-155 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 1 | |
| NDT1094-155-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-185 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 1 | |
| NDT1094-185-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-215 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 1 | |
| NDT1094-215-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-245 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 1 | |
| NDT1094-245-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-275 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 1 | |
| NDT1094-275-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-300 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 1 | |
| NDT1094-300-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 1 | |
| NDT1099G-P1 | BEOING REFERENCE STANDARD 757 Part 4 53-30-04 Page 15-17 Figure 3. Material: Delrin. *** SEE FINALIZED DRAWING*** | 1 | |
| NDT1101-750 | BOEING 6 HOLE REFERENCE STANDARD, MATERIAL: 6AL-4V TITANIUM, 10" X " X 5.0" X .750" THICK. LNCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| NDT1101-800 | BOEING 6 HOLE REFERENCE STANDARD, MATERIAL: 6AL-4V TITANIUM, 10" X " X 5.0" X .800" THICK. LNCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT1101-850 | BOEING 6 HOLE REFERENCE STANDARD, MATERIAL: 6AL-4V TITANIUM, 10" X " X 5.0" X .850" THICK. LNCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT1102-100 | BOEING REFERENCE STANDARD 787 Part 6 51-00-11 Page 5 Figure 1. Material:Ti-6AL-4V. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1102-200 | BOEING REFERENCE STANDARD 787 Part 6 51-00-11 Page 5 Figure 1. Material:Ti-6AL-4V. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1102-300 | BOEING REFERENCE STANDARD 787 Part 6 51-00-11 Page 5 Figure 1. Material:Ti-6AL-4V. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1102-400 | BOEING REFERENCE STANDARD 787 Part 6 51-00-11 Page 5 Figure 1. Material:Ti-6AL-4V. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1102-500 | BOEING REFERENCE STANDARD 787 Part 6 51-00-11 Page 5 Figure 1. Material:Ti-6AL-4V. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1102-600 | BOEING REFERENCE STANDARD 787 Part 6 51-00-11 Page 5 Figure 1. Material:Ti-6AL-4V. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT128 | Boeing Standard, 767 PT6 51-00-06 FIG1: PG4 *Customer needs to provide angle and material type | 1 | |
| NDT17031A | BOEING REFERENCE STANDARD 777-200/300 PART 4 57-20-14 PAGE 6 FIGURE 2. MATERIAL: 7055-T7751,AIRPLANE QUALITY ALUMINUM. INCLUDES TEST REPORT AND CE | 1 | |
| NDT17031B | BOEING REFERENCE STANDARD 777-200/300 PART 4 57-20-15 PAGE 11-12 FIGURE 2, SHEET 1&2 AND PART 4 57-20-13 PAGE 6 FIGURE 2. MATERIAL: 7055-T7751,AIR | 1 | |
| NDT17031C | BOEING REFERENCE STANDARD 777-200/300 PART 4 57-20-15 PAGE 13 FIGURE 2, SHEET 3. MATERIAL: 7055-T7751,AIRPLANE QUALITY ALUMINUM. INCLUDES TEST RE | 1 | |
| NDT194C | BOEING REFERENCE STANDARD 737 Part 6 53-30-00 Page 10 Figure 6. MATERIAL: 2024-T3 OR T4 CLAD ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT2009 | BOEING REFERENCE STANDARD 727 Part 4 57-10-27 Page 10 Figure 1. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT2015 | BOEING REFERENCE STANDARD 727 PT 4 54-30-27. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT2016 | BOEING REFERENCE STANDARD 727 Part 6 54-40-27 Page 5 Figure 1. Material: 6AL-4V and 4130, 4330, or 4340. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT2017 | BOEING REFERENCE STANDARD, 727 PART 4 57-10-27 FIGURE 1 PAGE 6. MATERIAL: 2024-T3 or 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT2024 | BOEING REFERENCE STANDARD 727 Part 6 53-30-27 Page 4 Figure 1. Material: 2024-T3 or T4 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT2025 | BOEING REFERENCE STANDARD 727 Part 6 53-30-27 Page 4 Figure 1. Material: 2024-T3 or T4 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT2026 | BOEING REFERENCE STANDARD 727 Part 6 53-30-27 Page 4 Figure 1. Material: 2024-T3 or T4 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT2027 | BOEING REFERENCE STANDARD 727 Part 6 53-30-27 Page 4 Figure 1. Material: 2024-T3 or T4 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT2028 | BOEING REFERENCE STANDARD 727 Part 6 53-30-27 Page 4 Figure 1. Material: 2024-T3 or T4 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT2029 | BOEING REFERENCE STANDARD 727 Part 6 53-30-27 Page 4 Figure 1. Material: 2024-T3 or T4 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT2032-A | BOEING REFERENCE STANDARD 727 Part 6 57-10-28 Page 7 Figure 2. Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT2033 | BOEING REFERENCE STANDARD, 727 PART 6 57-53-03 FIGURE 2 PAGE 6. MATERIAL:4340M OR 4330M STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3001 | BOEING REFERENCE STANDARD 737 Part 4 53-10-02 Page 8 Figure 2. Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3005 | BOEING REFERENCE STANDARD 737 Part 6 53-30-13 Page 5 Figure 1. Material: 2024-T3 or T4. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3008 | BOEING REFERENCE STANDARD 737 Part 6 54-40-01 Page 9 Figure 2. Material: 4330 or 4340. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3009 | BOEING REFERENCE STANDARD 737 Part 6 54-40-01 Page 9 Figure 2. Material: 4330 or 4340. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3010 | BOEING REFERENCE STANDARD 737 Part 6 54-40-01 Page 9 Figure 2. Material: 4330 or 4340. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3011 | BOEING REFERENCE STANDARD 737 Part 6 53-30-10 Page 9 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3012 | BOEING REFERENCE STANDARD 737 Part 4 53-10-03 Page 8 Figure 3. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3014-A | BOEING REFERENCE STANDARD 737 Part 4 27-00-01 Page 13 Figure 5. Material: 7075-T6 or T7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3014-B | BOEING REFERENCE STANDARD 737 Part 4 27-00-01 Page 13 Figure 5. Material: 7075-T6 or T7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3015 | BOEING REFERENCE STANDARD 737 Part 6 53-30-15 Page 8 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3052 | BOEING REFERENCE STANDARD 737 Part 6 57-10-26 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3053 | BOEING REFERENCE STANDARD 737 Part 6 53-30-21 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3054 | BOEING REFERENCE STANDARD 737 Part 4 57-10-04 Page 12 Figure 2. Material: Aircraft Quality Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3062 | BOEING REFERENCE STANDARD 737 Part 4 57-10-02 Page 8 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3065-STL | BOEING REFERENCE STANDARD 777 Part 6 53-00-07 Page 8 Figure 3. Material: Aluminum and 301 1/2 Hard. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3070 | BOEING REFERENCE STANDARD 737 Part 6 57-10-30 Page 4 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3071A and NDT3071B | BOEING REFERENCE STANDARD 737 Part 6 53-10-65 Page 11 Figure 2. Material: 2024-T3 Bare or Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3073 | BOEING REFERENCE STANDARD 737 Part 6 57-10-31 Page 8 Figure 2. Material: 2024-T3 or T4. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3075 | BOEING REFERENCE STANDARD 727 Part 6 53-30-26 Page 7 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3077 | BOEING REFERENCE STANDARD 737 Part 6 53-10-69 Page 13 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3078 | BOEING REFERENCE STANDARD 737 Part 6 53-10-38 Page 9 Figure 4. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3080 | BOEING REFERENCE STANDARD 737 Part 4 55-30-02 Page 10 Figure 3. Material: 2024-T3, 7050 or 7075. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3080-B | BOEING REFERENCE STANDARD 737 Part 4 737 55-30-02 Page 11 Figure 4. Material:2024-T3,7075 or 7075. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3083 | BOEING REFERENCE STANDARD 737 Part 4 55-10-03 Page 14 Figure 3. Material: Aircraft Quality Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3085A | BOEING REFERENCE STANDARD 737 Part 6 57-10-32 Page 8 Figure 3. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3085B | BOEING REFERENCE STANDARD 737 Part 6 57-10-32 Page 8 Figure 3. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3085C | BOEING REFERENCE STANDARD 737 Part 6 57-10-32 Page 8 Figure 3. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3086A | BOEING REFERENCE STANDARD 737 Part 6 57-10-32 Page 9 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3086B | BOEING REFERENCE STANDARD 737 Part 6 57-10-32 Page 9 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3086C | BOEING REFERENCE STANDARD 737 Part 6 57-10-32 Page 9 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3090A | BOEING REFERENCE STANDARD 737 Part 6 53-10-52 Page 7 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3090B | BOEING REFERENCE STANDARD 737 Part 6 53-10-52 Page 8 Figure 3. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3090C | BOEING REFERENCE STANDARD 737 Part 6 53-10-52 Page 8 Figure 3. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3094 | BOEING REFERENCE STANDARD 737 Part 4 55-10-24 Page 14 Figure 4. Material: 2000 or 7000 Series Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3098 | BOEING REFERENCE STANDARD 737 Part 4 55-10-07 Page 6 Figure 2. Material: Ti-6AL-4V. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3099 | BOEING REFERENCE STANDARD 737 Part 4 55-10-06 Page 8 Figure 2. Material: Ti-6AL-4V. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3112 | BOEING REFERENCE STANDARD 737 Part 4 57-50-05 Page 7 Figure 2. Material: 15-5 Steel. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3117 | BOEING REFERENCE STANDARD 737 Part 5 54-40-03 Page 7 Figure 2. Material: 4330M or 4340M and 6AL-4V. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3118 | BOEING REFERENCE STANDARD 737 Part 6 52-30-01 Page 10 Figure 3. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3129 | BOEING REFERENCE STANDARD Part 6 53-30-38 Page 8 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3131 | BOEING REFERENCE STANDARD 737 Part 6 53-11-10 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3132 | BOEING REFERENCE STANDARD 737 Part 6 53-11-18 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3132B | BOEING REFERENCE STANDARD 737 Part 6 53-11-18 page 8 Figure 3. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3133 | BOEING REFERENCE STANDARD 737 Part 6 53-11-16 Page 8 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3136 | BOEING REFERENCE STANDARD 737 Part 4 55-10-14 Page 6 Figure 2. Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3137 | BOEING REFERENCE STANDARD 737 Part 6 57-50-03 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3141 | BOEING REFERENCE STANDARD 737 Part 4 55-10-13 Page 8 Figure 2. MATERIAL: 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3141G1 | BOEING TRANSDUCER GUIDE 737 Part 4 55-10-13 Page 9 Figure 3. Material: Delrin. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3142 | BOEING REFERENCE STANDARD 737 Part 6 53-11-08 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3144 | BOEING REFERENCE STANDARD 737 Part 4 55-10-16 Page 6 Figure 2. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3145 | BOEING REFERENCE STANDARD 737 Part 4 55-10-16 Page 7 Figure 3. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3146 | BOEING REFERENCE STANDARD 737 Part 4 55-10-16 Page 8 Figure 4. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3149 | BOEING REFERENCE STANDARD 737 Part 6 53-30-41 Page 6 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3151 | BOEING REFERENCE STANDARD 737 PT 6 53-30-46 PAGE 7 FIGURE2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3152- H | BOEING REFERENCE STANDARD 737 PART 6 57-10-55 PAGE 8 FIGURE 2. MATERIAL: 2024-T3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT3152-A | BOEING REFERENCE STANDARD 737 Part 6 57-10-55 Page 8 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3152-B | BOEING REFERENCE STANDARD 737 Part 6 57-10-55 Page 8 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3152-C | BOEING REFERENCE STANDARD 737 Part 6 57-10-55 Page 8 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3152-D | BOEING REFERENCE STANDARD 737 Part 6 57-10-55 Page 8 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3152-E | BOEING REFERENCE STANDARD 737 Part 6 57-10-55 Page 8 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3152-F | BOEING REFERENCE STANDARD 737 Part 6 57-10-55 Page 8 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3152-G | BOEING REFERENCE STANDARD 737 Part 6 57-10-55 Page 8 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3152-H | BOEING REFERENCE STANDARD 737 Part 6 57-10-55 Page 8 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3152-I | BOEING REFERENCE STANDARD 737 Part 6 57-10-55 Page 8 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3152-J | BOEING REFERENCE STANDARD 737 Part 6 57-10-55 Page 8 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3152-K | BOEING REFERENCE STANDARD 737 Part 6 57-10-55 Page 8 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3153-A | BOEING REFERENCE STANDARD 737 Part 6 57-10-54 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3153-B | BOEING REFERENCE STANDARD 737 Part 6 57-10-54 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3153-C | BOEING REFERENCE STANDARD 737 Part 6 57-10-54 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3153-D | BOEING REFERENCE STANDARD 737 Part 6 57-10-54 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3153-E | BOEING REFERENCE STANDARD 737 Part 6 57-10-54 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3153-F | BOEING REFERENCE STANDARD 737 Part 6 57-10-54 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3153-G | BOEING REFERENCE STANDARD 737 Part 6 57-10-54 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3153-H | BOEING REFERENCE STANDARD 737 Part 6 57-10-54 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3153-J | BOEING REFERENCE STANDARD 737 Part 6 57-10-54 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3156 | BOEING REFERENCE STANDARD 737 Part 6 57-10-60 Page 11 Figure 2. Material: 2024-T3. Includes test report and Certificate of Conformance. | 4 | |
| NDT3157 | BOEING REFERENCE STANDARD 737 Part 6 57-10-60 Page 11 Figure 2. Material: 7150-T7. Includes test report and Certificate of Conformance. | 4 | |
| NDT3159 | BOEING REFERENCE STANDARD 737 Part 6 57-10-60 Page 11 Figure 2. Material: 2024-T3. Includes test report and Certificate of Conformance. | 4 | |
| NDT3161 | BOEING REFERENCE STANDARD 737 Part 6 57-10-60 Page 11 Figure 2. Material: 2024-T3. Includes test report and Certificate of Conformance. | 3 | |
| NDT3162 | BOEING REFERENCE STANDARD 737 Part 6 57-10-60 Page 11 Figure 2. Material: 7150-T7. Includes test report and Certificate of Conformance. | 4 | |
| NDT3163 | BOEING REFERENCE STANDARD 737 Part 6 57-10-60 Page 11 Figure 2. Material: 7150-T7. Includes test report and Certificate of Conformance. | 2 | |
| NDT3164 | BOEING REFERENCE STANDARD 737 Part 6 57-10-60 Page 11 Figure 2. Material: 7150-T7. Includes test report and Certificate of Conformance. | 3 | |
| NDT3166-001 | BOEING REFERENCE STANDARD 737 Part 4 57-10-08 Page 6 Figure 2. Material: Aircraft Quality Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3166-002 | BOEING REFERENCE STANDARD 737 Part 4 57-10-08 Page 6 Figure 2. Material: Aircraft Quality Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3166-003 | BOEING REFERENCE STANDARD 737 Part 4 57-10-08 Page 6 Figure 2. Material: Aircraft Quality Aluminum. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3166-004 | BOEING REFERENCE STANDARD 737 Part 4 57-10-08 Page 6 Figure 2. Material: Aircraft Quality Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3166-005 | BOEING REFERENCE STANDARD 737 Part 4 57-10-08 Page 6 Figure 2. Material: Aircraft Quality Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3166-006 | BOEING REFERENCE STANDARD 737 Part 4 57-10-08 Page 6 Figure 2. Material: Aircraft Quality Aluminum. Includes Test Report and Certificate of Conformance. | 4 | |
| NDT3166-007 | BOEING REFERENCE STANDARD 737 Part 4 57-10-08 Page 6 Figure 2. Material: Aircraft Quality Aluminum. Includes Test Report and Certificate of Conformance. | 4 | |
| NDT3167-A | BOEING REFERENCE STANDARD 737 Part 6 57-10-58 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3167-B | BOEING REFERENCE STANDARD 737 Part 6 57-10-58 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3167-C | BOEING REFERENCE STANDARD 737 Part 6 57-10-58 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3167-D | BOEING REFERENCE STANDARD 737 Part 6 57-10-58 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3167-E | BOEING REFERENCE STANDARD 737 Part 6 57-10-58 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3167-F | BOEING REFERENCE STANDARD 737 Part 6 57-10-58 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3167-G | BOEING REFERENCE STANDARD 737 Part 6 57-10-58 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3167-H | BOEING REFERENCE STANDARD 737 Part 6 57-10-58 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3167-J | BOEING REFERENCE STANDARD 737 Part 6 57-10-58 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3168 | BOEING REFERENCE STANDARD 737 Part 6 57-10-53 Page 6 Figure 2. Material: 7075-T7. Includes test report and Certificate of Conformance. | 3 | |
| NDT3169 | BOEING REFERENCE STANDARD 737 Part 6 57-10-48 Page 5 Figure 2. Material: 2024-T3. Includes test report and Certificate of Conformance. | 1 | |
| NDT3170 | BOEING REFERENCE STANDARD 737 Part 4 57-10-06 Page 16 Figure 2. Material: Aircraft Quality Aluminum. Includes Test Report and Certificate of Conformance. | 5 | |
| NDT3171 | BOEING REFERENCE STANDARD 737 Part 4 57-10-06 Page 17 Figure 3. Material: Aircraft Quality Aluminum. Includes Test Report and Certificate of Conformance. | 5 | |
| NDT3172 | BOEING REFERENCE STANDARD 737 Part 4 57-10-05 Page 14 Figure 2. Material: Aircraft Quality Aluminum. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3176-A | BOEING REFERENCE STANDARD 737 Part 6 57-10-59 Page 12 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3176-B | BOEING REFERENCE STANDARD 737 Part 6 57-10-59 Page 12 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3176-C | BOEING REFERENCE STANDARD 737 Part 6 57-10-59 Page 12 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3176-D | BOEING REFERENCE STANDARD 737 Part 6 57-10-59 Page 12 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3178-A | BOEING REFERENCE STANDARD 737 Part 6 57-10-62 Page 8 Figure 2. Material: 2024-T3. Test Report and Certificate of Conformance. | 2 | |
| NDT3178-B | BOEING REFERENCE STANDARD 737 Part 6 57-10-62 Page 8 Figure 2. Material: 2024-T3. Test Report and Certificate of Conformance. | 2 | |
| NDT3178-C | BOEING REFERENCE STANDARD 737 Part 6 57-10-62 Page 8 Figure 2. Material: 2024-T3. Test Report and Certificate of Conformance. | 3 | |
| NDT3178-D | BOEING REFERENCE STANDARD 737 Part 6 57-10-62 Page 8 Figure 2. Material: 2024-T3. Test Report and Certificate of Conformance. | 3 | |
| NDT3178-E | BOEING REFERENCE STANDARD 737 Part 6 57-10-62 Page 8 Figure 2. Material: 2024-T3. Test Report and Certificate of Conformance. | 2 | |
| NDT3178-F | BOEING REFERENCE STANDARD 737 Part 6 57-10-62 Page 8 Figure 2. Material: 2024-T3. Test Report and Certificate of Conformance. | 2 | |
| NDT3178-G | BOEING REFERENCE STANDARD 737 Part 6 57-10-62 Page 8 Figure 2. Material: 2024-T3. Test Report and Certificate of Conformance. | 2 | |
| NDT3178-X | BOEING REFERENCE STANDARD 737 Part 6 57-10-62 Page 8 Figure 2. Material: 2024-T3. Test Report and Certificate of Conformance. | 1 | |
| NDT3179-A | BOEING REFERENCE STANDARD 737 Part 6 53-30-39 Page 4 Figure 1. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3179-B | BOEING REFERENCE STANDARD 737 Part 6 53-30-39 Page 4 Figure 1. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3179-C | BOEING REFERENCE STANDARD 737 Part 6 53-30-39 Page 4 Figure 1. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3180-A | BOEING REFERENCE STANDARD 737 Part 6 57-10-61 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3180-B | BOEING REFERENCE STANDARD 737 Part 6 57-10-61 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3180-C | BOEING REFERENCE STANDARD 737 Part 6 57-10-61 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3180-D | BOEING REFERENCE STANDARD 737 Part 6 57-10-61 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3180-E | BOEING REFERENCE STANDARD 737 Part 6 57-10-61 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3180-F | BOEING REFERENCE STANDARD 737 Part 6 57-10-61 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3180-G | BOEING REFERENCE STANDARD 737 Part 6 57-10-61 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3180-H | BOEING REFERENCE STANDARD 737 Part 6 57-10-61 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3180-J | BOEING REFERENCE STANDARD 737 Part 6 57-10-61 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3181-A | BOEING REFERENCE STANDARD 737 Part 6 57-10-63 page 9 Figure 2. Material: 7075-T7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3181-B | BOEING REFERENCE STANDARD 737 Part 6 57-10-63 page 9 Figure 2. Material: 7075-T7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3181G | BOEING GUIDE 737 Part 6 57-10-63 page 14 Figure 7. Material:Delrin. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3182-A | BOEING REFERENCE STANDARD 737 Part 6 57-10-63 Page 10 Figure 3. Material: 7075-T7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3182-B | BOEING REFERENCE STANDARD 737 Part 6 57-10-63 Page 10 Figure 3. Material: 7075-T7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3182G | BOEING GUIDE 737 Part 6 57-10-63 Page 14 Figure 7. Material:Delrin. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3183 | BOEING REFERENCE STANDARD 737 Part 6 57-10-63 Page 11 Figure 4. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3183G | BOEING GUIDE 737 Part 6 57-10-63 Page 14 Figure 7. Material:Delrin. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3184G | BOEING GUIDE 737 Part 6 57-10-63 Page 14 Figure 7. Material:Delrin. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3185-A | BOEING REFERENCE STANDARD 737 Part 6 57-10-63 Page 13 Figure 6. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3185-B | BOEING REFERENCE STANDARD 737 Part 6 57-10-63 Page 13 Figure 6. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3185G | BOEING GUIDE 737 part 6 57-10-63 page 14 Figure 7. Material:Delrin. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3189 | BOEING REFERENCE STANDARD 737 Part 4 55-10-18 Page 6 Figure 2. Material: 7075-T6, 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3190-A | BOEING REFERENCE STANDARD 737 Part 6 55-10-45 Page 6 Figure 2. Material: 2024-T6, 7150-T7 or 7150-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3190-B | BOEING REFERENCE STANDARD 737 Part 6 55-10-45 Page 6 Figure 2. Material: 2024-T6, 7150-T7 or 7150-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3190-C | BOEING REFERENCE STANDARD 737 Part 6 55-10-45 Page 6 Figure 2. Material: 2024-T6, 7150-T7 or 7150-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3190-D | BOEING REFERENCE STANDARD 737 Part 6 55-10-45 Page 6 Figure 2. Material: 2024-T6, 7150-T7 or 7150-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3191 | BOEING REFERENCE STANDARD 737 Part 6 55-10-28 Page 6 Figure 2. Material: 2024-T3 or Equivalent. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3192 | BOEING REFERENCE STANDARD 737 Part 6 55-10-28 Page 7 Figure 3. Material: 2024-T3 or Equivalent. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3195 | BOEING REFERENCE STANDARD 737 PT 4 55-10-17 PAGE 18 FIGURE 4. MATERIAL: 7075-T6 or EQUIVALENT AIRCRAFT QUALITY ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3196 | BOEING REFERENCE STANDARD 737 PT 4 55-10-17 PAGE 19 FIGURE 5. MATERIAL: 7075-T6 or EQUIVALENT AIRCRAFT QUALITY ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3197 | BOEING REFERENCE STANDARD 737 PT 4 55-10-17 PAGE 20 FIGURE 6. MATERIAL: 7075-T6 or EQUIVALENT AIRCRAFT QUALITY ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3202-A | BOEING REFERENCE STANDARD 737 Part 6 55-10-53 Page 9 Figure 2. Material: 2024-T3 or Equivalent with a Conductivity of 28-32 IACS. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3202-B | BOEING REFERENCE STANDARD 737 Part 6 55-10-53 Page 9 Figure 2. Material: 2024-T3 or Equivalent with a Conductivity of 28-32 IACS. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3202-C | BOEING REFERENCE STANDARD 737 Part 6 55-10-53 Page 9 Figure 2. Material: 2024-T3 or Equivalent with a Conductivity of 28-32 IACS. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3202-D | BOEING REFERENCE STANDARD 737 Part 6 55-10-53 Page 9 Figure 2. Material: 2024-T3 or Equivalent with a Conductivity of 28-32 IACS. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3202-E | BOEING REFERENCE STANDARD 737 Part 6 55-10-53 Page 9 Figure 2. Material: 2024-T3 or Equivalent with a Conductivity of 28-32 IACS. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3202-F | BOEING REFERENCE STANDARD 737 Part 6 55-10-53 Page 9 Figure 2. Material: 2024-T3 or Equivalent with a Conductivity of 28-32 IACS. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3202-G | BOEING REFERENCE STANDARD 737 Part 6 55-10-53 Page 9 Figure 2. Material: 2024-T3 or Equivalent with a Conductivity of 28-32 IACS. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3204 | BOEING REFERENCE STANDARD 737 Part 4 53-10-08 Page 9 Figure 2. Material: 7075-T7. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3207 | BOEING REFERENCE STANDARD 737 Part 6 55-10-50 Page 5 Figure 2. Material: 7075-T6 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3207A | BOEING REFERENCE STANDARD 737 Part 6 55-10-82 Paqe 5 Figure 2. Material: 7075-T6 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3208-C | BOEING REFERENCE STANDARD 737 Part 6 55-10-55 Page 6 Figure 3. Material: Carbon Fiber and 2024-T3 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3209A | BOEING REFERENCE STANDARD 737 Part 6 55-10-74 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3221 | BOEING REFERENCE STANDARD 737 Part 4 55-10-19 Page 6 Figure 2. Material: 2024-T3 or Equivalent. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3223 | BOEING REFERENCE STANDARD 737 Part 6 55-11-34 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3224 | BOEING REFERENCE STANDARD 737 Part 4 54-40-01 Page 7 Figure 3. Material: 15-5PH or 4330. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3225 | BOEING REFERENCE STANDARD 737 Part 6 54-40-20 Page 6 Figure 2. Material: 6AL-4V and 15-5PH. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3226 | BOEING REFERENCE STANDARD 53-11-39 PART 6. MATERIAL: 2024-T3 ALUMINUM. 2. Includes Test Report and Certificate of Conformance.BACR15FT6D RIVETS BUCKED BETWEEN .250"Ø and .280"Ø. | 2 | |
| NDT3226A | BOEING REFERENCE STANDARD 737 Part 6 53-11-39 Page 5 Figure 2. Material: 2024-T4 or Equivalent. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3227 | BOEING REFERENCE STANDARD 737 Part 4 54-40-09 Page 6 Figure 2. Material: 15-5 PH. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3228-A | BOEING REFERENCE STANDARD 737 Part 6 57-10-87 Page 7 Figure 2. Material: 7150-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3228-B | BOEING REFERENCE STANDARD 737 Part 6 57-10-87 Page 7 Figure 2. Material: 7150-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3228-C | BOEING REFERENCE STANDARD 737 Part 6 57-10-87 Page 7 Figure 2. Material: 7150-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3229 | BOEING REFERENCE STANDARD 737 PT6 53-30-50 FIGURE 2 PAGE 21. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT322A | BOEING REFERENCE STANDARD 737 Part 6 53-10-25 Page 4 Figure 1. Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3231 | BOEING REFERENCE STANDARD 737 Part 4 53-10-10 Page 10 Figure. Material: 2024 or 7075 series Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3232-A | BOEING REFERENCE STANDARD 737 Part 6 57-10-86 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3232-B | BOEING REFERENCE STANDARD 737 Part 6 57-10-86 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3232-C | BOEING REFERENCE STANDARD 737 Part 6 57-10-86 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3234 | BOEING REFERENCE STANDARD 737 Part 6 57-10-89 Page 7 Figure 3. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3235 | BOEING REFERENCE STANDARD 737 Part 4 -54-40-05 Page 5 Figure 2. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3236 | BOEING REFERENCE STANDARD 737 Part 6 57-10-85 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3238 | BOEING REFERENCE STANDARD 737 Part 4 55-10-23 Page 6 Figure 2. Material: 7050-T7 or Equivalent. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3239 | BOEING REFERENCE STANDARD 737 Part 4 55-30-03 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3239G | BOEING CALIBRATION GUIDE 737 Part 4 55-30-03 Page 8 Figure 3. Material: Delrin. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3240 | BOEING REFERENCE STANDARD 737 Part 6 57-10-90 Page 6 Figure 3. Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3244 | BOEING REFERENCE STANDARD 737 Part 6 53-11-42 Page 8 Figure 2. Material: 2024-T4 or Equivalent. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3248 | BOEING REFERENCE STANDARD 737 Part 6 55-10-66 Page 5 Figure 2. Material: 7075-T7. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3251 | BOEING REFERENCE STANDARD 737 Part 6 52-30-02 page 5 Figure 2. Material: 7050-T7 or 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3252 | BOEING REFERENCE STANDARD 737 Part 4 52-10-03 Page 7 Figure 2. Material: 7050-T7 or 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3253 | BOEING REFERENCE STANDARD 737 Part 4 54-40-06 Page 7 Figure 2. Material: 15-5PH or 4340. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3254 | BOEING REFERENCE STANDARD 737 Part 4 54-40-06 Page 8 Figure 3. Material: 15-5PH or 4340. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3257 | BOEING REFERENCE STANDARD 737 Part 657-10-96 Page 7 Figure 2. Material: 7050-T7 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3258-B | BOEING REFERENCE STANDARD 737 Part 4 54-40-08 Page 6 Figure 2. Material: 15-5PH. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3259 | BOEING REFERENCE STANDARD 737 Part 6 54-40-17 Page 8 Figure 2. Material: 6AL-4V, 15-5PH and 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3260 | BOEING REFERENCE STANDARD 737 Part 6 54-40-17 Page 9 Figure 3. Material: 6AL-4V, 15-5PH and 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3261 | BOEING REFERENCE STANDARD 737 Part 6 57-50-31 Page 9 Figure 2. Material: 2024-T3 and 7075-T7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3262 | BOEING REFERENCE STANDARD 737 Part 4 54-40-17 Page 6 Figure 2. Material: 15-5PH. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3263 | BOEING REFERENCE STANDARD 737 Part 6 57-50-31 Page 10 Figure 3. Material: 2024-T3 and 7075-T7. Inlcudes | 1 | |
| NDT3264 | BOEING REFERENCE STANDARD 737 Part 4 55-10-22 page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3265 | BOEING REFERENCE STANDARD 737 Part 655-10-70 Page 8 Figure 2. Material: 7075-T7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3266 | BOEING REFERENCE STANDARD 737 Part 6 -57-10-96 Page 8 Figure 3. Material: 7050-T7 or Eqivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3268 | BOEING REFERENCE STANDARD 737 Part 4 53-10-11 Page 4 Figure 2. Material: 7075-T6 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3271 | BOEING REFERENCE STANDARD 737 PART 4 55-10-27 FIGURE 2 SHEET 1&2 PAGE 12. MATERIAL: 6AL-4v Includes Test Report and Certificate of Conformance. MATERIAL: 6AL-4v TITANIUM. | 2 | |
| NDT3272 | BOEING REFERENCE STANDARD 737 PART 4 55-10-27 FIGURE 3 PAGE 14. MATERIAL: 6AL-4v. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3276 | BOEING REFERENCE STANDARD 737 PART 4 53-20-02 FIGURE 2 PAGE 9. MATERIAL: 2024-T3 ALUMINUM WITH RUBBER FEET ON BOTTOM FOR SUPPORT. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3276A | BOEING REFERENCE STANDARD 737 PART 4 53-20-02 FIGURE 3 PAGE 10. MATERIAL: 2024-T3 ALUMINUM WITH RUBBER FEET ON BOTTOM FOR SUPPORT. Includes Test Report and Certificate of Conformance. . | 2 | |
| NDT3278-A | BOEING REFERENCE STANDARD 737 PART 6 53-30-50 FIGURE 3 PAGE 30. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3278-B | BOEING REFERENCE STANDARD 737 PART 6 53-30-50 FIGURE 3 PAGE 30. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3278-C | BOEING REFERENCE STANDARD 737 PART 6 53-30-50 FIGURE 3 PAGE 30. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3282 | BOEING REFERENCE STANDARD 737 PART 4 57-10-20 PAGE 7 FIGURE 2 . MATERIAL: 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3285 | BOEING REFERENCE STANDARD 737 Part 6 53-30-63 Page 11 Figure 2. Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3286 | BOEING REFERENCE STANDARD 787 Part 4 53-20-02 Page 7 Figure 2. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3287 | BOEING REFERENCE STANDARD 787 Part 4 53-20-01 Page 7 Figure 2. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3288 | BOEING REFERENCE STANDARD 787 Part 4 53-20-01 Page 7 Figure 2. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3289 | BOEING REFERENCE STANDARD 737 Part 6 53-30-65 Page 8 Figure 2. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3291 | BOEING REFERENCE STANDARD 737 Part 6 53-30-65 Page 8 Figure 2. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3292 | BOEING REFERENCE STANDARD 737 Part 6 53-30-65 Page 8 Figure 2. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3293 | BOEING REFERENCE STANDARD 737 Part 6 53-30-65 Page 8 Figure 2. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3294 | BOEING REFERENCE STANDARD 737 Part 6 53-30-65 Page 8 Figure 2. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3295 | BOEING REFERENCE STANDARD 737 Part 6 53-30-66 Page 6 Figure 2. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3296 | BOEING REFERENCE STANDARD 737 Part 6 53-30-65 Page 8 Figure 2. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3297 | BOEING REFERENCE STANDARD 737 Part 6 53-30-64 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3298 | BOEING REFERENCE STANDARD 737 Part 6 53-30-66 Page 6 Figure 2. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3299 | BOEING REFERENCE STANDARD 737 Part 6 53-30-65 Page 8 Figure 2. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3300 | BOEING REFERENCE STANDARD 737 Part 6 5330-60 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3304 | BOEING 737 R&D REFERENCE STANDARD, 53-30-XX PART 6. MATERIAL: 2024-T3 CLAD, 1100 FOIL. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3305A | BOEING REFERENCE STANDARD PART 4 53-10-64 PG.18, FIG. 5. MATERIAL: 2024-T42 CLAD ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3305B | BOEING REFERENCE STANDARD PART 4 53-10-64 PG.18, FIG. 5. MATERIAL: 2024-T42 CLAD ALUMINUM. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT391 | BOEING REFERENCE STANDARD Part 6 53-10-51 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT392 | BOEING REFERENCE STANDARD 737 Part 4 53-30-03 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT396 | BOEING REFERENCE STANDARD 737 PT 6 53-30-09 FIG 2.( Note: Material thickness for this standard is .036"/.036"). Includes Test Report and Certificate of Conformance. | 6 | |
| NDT4064 | BOEING REFERENCE STANDARD 747 Part 6 53-30-06 Page 4 Figure 1. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4116 | BOEING REFERENCE STANDARD 747 Part 4 54-40-02 Page 20 Figure 7. Material: 4330M or 4340M. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4152 | BOEING 747 REFERENCE STANDARD PART 4 53-10-07 PAGE 6 FIGURE 2. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4157 | BOEING REFERENCE STANDARD 747 PT 4 54-40-14 PAGE 22 FIGURE 8. MATERIAL: 15-5PH. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4170 | BOEING REFERENCE STANDARD 747 Part 4 53-30-02 Page 5 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4178 | BOEING REFERENCE STANDARD 747 Part 4 53-40-05 Page 4 Figure 2. Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4205 | BOEING REFERENCE STANDARD 747 PT 4 57-40-07 PAGE 5 FIGURE 2. MATERIAL: 4340 STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4219 | BOEING REFERENCE STANDARD 747 Part 4 53-10-11 Page 9 Figure 2. Material: 7075-T6 or 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4220 | BOEING REFERENCE STANDARD 747 Part 6 53-30-13 Page 9 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4221 | BOEING 747 REFERENCE STANDARD PART 6 53-30-12 PAGE 5 FIGURE 2. MATERIAL: 2024-T3 Bare or Clad Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4225 | BOEING 747 REFERENCE STANDARD PART 6 53-10-47 PAGE 7 FIGURE 2. MATERIAL: 7075-T6 or 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4226 | BOEING REFERENCE STANDARD 747 Part 4 57-10-22 Page 6 Figure 2, Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4228 | BOEING 747 REFERENCE STANDARD PART 6 54-40-16 PAGE 11 FIGURE 2. MATERIAL: 15-5PH, 17-4 PH or 4130 STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4232 | Boeing Reference Standard 747 55-10-03 PART 4 Figure 2, Page 6. Material: 2024-T3 or 7075-T6 Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4233 | Boeing Reference Standard 747 55-10-03 PART 4 Figure 3, Page 7. Material: 2024-T3 or 7075-T6 Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4234 | Boeing Reference Standard 747 55-10-03 PART 4 Figure 4, Page 8. Material: 2024-T3 or 7075-T6 Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4235 | Boeing Reference Standard 747 55-10-03 PART 4 Figure 5, Page 9. Material: 2024-T3 or 7075-T6 Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4236 | Boeing Reference Standard 747 53-30-16 PART 6 Figure 1, Page 5&6. Material: 2024-T3 Clad Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4237 | Boeing Reference Standard 747 53-30-16 PART 6 Figure 1, Page 5&6. Material: 2024-T3 Clad Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4238 | Boeing Reference Standard 747 53-30-16 PART 6 Figure 1, Page 5&6. Material: 2024-T3 Clad Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4239 | Boeing Reference Standard 747 53-30-16 PART 6 Figure 1, Page 5&6. Material: 2024-T3 Clad Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4240 | BOEING REFERENCE STANDARD 747 Part 4 27-20-01 Page 8 Figure 3, Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4243 | BOEING REFERENCE STANDARD 747 Part 6 57-10-31 Page 4 Figure 1. Material: 2024-T3 or An Airplane Quality with an Electrical Conductivity of 28-43% IACS. Fasteners: Non-Magetic Fastener. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4244 | BOEING REFERENCE STANDARD 747 Part 4 53-10-12 Page 5 Figure 2. Material: 7075-T6, 7075-T7, or 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT4249 | BOEING REFERENCE STANDARD 747 Part 6 53-30-19 Page 3 Figure 1. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4251 | BOEING REFERENCE STANDARD 747 Part 4 57-30-11 Page 11 Figure 2. Material: Aircraft Qualtiy Alimunim Plate, Any 2024 and 7075. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4252 | BOEING REFERENCE STANDARD 747 Part 4 57-10-23 Page 6 Figure 2. Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4267 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 10 FIGURE 2. MATERIAL: 7075-T7 or 2024-T3 ALUMINUM,. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4268 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 11 FIGURE 3. MATERIAL: 7075-T7 or 2024-T3 ALUMINUM,. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4269 | BOEING REFERENCE STANDARD 747 part 4 57-40-08 page 12 Figure 4. Material: 7075-T7. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT4270 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 13 FIGURE 5. MATERIAL: 7075-T7 or 2024-T3 ALUMINUM,. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT4271 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 14 FIGURE 6. MATERIAL: 7075-T7 or 2024-T3 ALUMINUM,. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4272 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 15 FIGURE 7. MATERIAL: 7075-T7 or 2024-T3 ALUMINUM,. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4273 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 16 FIGURE 8. MATERIAL: 7075-T7 or 2024-T3 ALUMINUM,. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT4274 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 17 FIGURE 9. MATERIAL: 7075-T7 or 2024-T3 ALUMINUM,. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT4275 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 18 FIGURE 10. MATERIAL: 15-5PH. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4276 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 18 FIGURE 10. MATERIAL: 15-5PH. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT4277 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 18 FIGURE 10. MATERIAL: 15-5PH. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4278 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 18 FIGURE 10. MATERIAL: 15-5PH. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4279 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 18 FIGURE 10. MATERIAL: 15-5PH. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT4280 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 18 FIGURE 10. MATERIAL: 15-5PH. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4281 | BOEING REFERENCE STANDARD 747 PT 4 57-10-26 PAGE 5 FIGURE 2. MATERIAL: 15-5PH. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT504A | BOEING REFERENCE STANDARD 757 Part 6 54-40-01 Page 12 Figure 3, Material: 4330, 4330M, 4340, or 4340M. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT504B | BOEING REFERENCE STANDARD 757 Part 6 54-40-01 Page 12 Figure 3, Material: 4330, 4330M, 4340, or 4340M. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT504C | BOEING REFERENCE STANDARD 757 Part 6 54-40-01 Page 12 Figure 3, Material: 4330, 4330M, 4340, or 4340M. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT504D | BOEING REFERENCE STANDARD 757 Part 6 54-40-01 Page 12 Figure 3, Material: 4330, 4330M, 4340, or 4340M. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT504E | BOEING REFERENCE STANDARD 757 Part 6 54-40-01 Page 12 Figure 3, Material: 4330, 4330M, 4340, or 4340M. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT5097-A | BOEING REFERENCE STANDARD 757 PT 4 57-20-03 FIG 2 PG 6. Material 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT5097-B | BOEING REFERENCE STANDARD 757 PT 4 57-20-03 FIG 2 PG 6. Material 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT5097-C | BOEING REFERENCE STANDARD 757 PT 4 57-20-03 FIG 2 PG 6. Material 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT5097-D | BOEING REFERENCE STANDARD 757 PT 4 57-20-03 FIG 2 PG 6. Material 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT511 | BOEING REFERENCE STANDARD 757 Part 6 57-10-02 Page 7 Figure 2. Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT516 | BOEING REFERENCE STANDARD 757 Part 6 57-23-01 Page 3 Figure 1. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT519 | BOEING REFERENCE STANDARD 757 Part 6 52-30-01 Page 8 Figure 4. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT525 | Boeing Reference Standard 757 Part 4 54-50-01 Page 7 Figure 3. Material: 4330, 4330M, 4340, or 4340M. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT527 | BOEING REFERENCE STANDARD 757 Part 6 53-30-06 Page 8 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT528 | BOEING REFERENCE STANDARD 757 Part 4 55-10-04 Page 10 Figure 2. Material: Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT531 | BOEING REFERENCE STANDARD 757 Part 6 53-60-01 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT542 | BOEING REFERENCE STANDARD 757 Part 4 55-10-07 Page 11 Figure 3. Material: Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT549 | BOEING REFERENCE STANDARD 757 Part 6 57-20-02 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT558 | BOEING REFERENCE STANDARD 757 Part 6 53-30-12 Page 8 Figure 1. Material: 2024-T3. Includes Certification Report and Certificate of Conformance. | 1 | |
| NDT562 | BOEING REFERENCE STANDARD 757 Part 4 57-25-01 Page 11 Figure 2. Material: Aircraft Qualtiy Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT564A | BOEING REFERENCE STANDARD 757 Part 4 57-50-01 Page 4 Figure 2. Material: Aircraft Grade Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT564B | BOEING REFERENCE STANDARD 757 Part 4 57-50-01 Page 4 Figure 2. Material: Aircraft Grade Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT568 | BOEING REFERENCE STANDARD 757 Part 6 57-51-05 Page 8 Figure 2. Material: 7050-T7. includes Test Report and Certificate of Conformance. | 2 | |
| NDT575 | BOEING REFERENCE STANDARD 757 Part 6 53-60-12 Page 8 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT578 | BOEING REFERENCE STANDARD 757 Part 6 55-10-04 Page 10 Figure 2. Material: 2024-T6 or 7150-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT579 | BOEING REFERENCE STANDARD 757 Part 6 54-40-05 page 6 Figure 2. Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT582 | BOEING REFERENCE STANDARD 757 PT 6 57-50-08 Page 7 Figure 2. Material: 2024-T351 Aluminum Includes Test Report and Certificate of Conformance. | 2 | |
| NDT595 | BOEING REFERENCE STANDARD 757 Part 4 53-80-02 Page 7 Figure 2. Material: 2024-T3 or Equivalent. includes Test Report and Certificate of Conformance. | 1 | |
| NDT6000A | BOEING REFERENCE STANDARD 767 Part 4 57-50-02 Page 9 Figure 3. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6000B | BOEING REFERENCE STANDARD 767 Part 4 57-50-02 Page 9 Figure 3. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6000C | BOEING REFERENCE STANDARD 767 Part 4 57-50-02 Page 9 Figure 3. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6000D | BOEING REFERENCE STANDARD 767 Part 4 57-50-02 Page 9 Figure 3. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6000E | BOEING REFERENCE STANDARD 767 Part 4 57-50-02 Page 9 Figure 3. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6001 | BOEING REFERENCE STANDARD 767 Part 4 57-50-23 Page 7 Figure 2. Material: 4330M, 4340M or 4340. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6002 | BOEING REFERENCE STANDARD 767 Part 4 57-50-24 Page 7 Figure 2. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6009 | BOEING REFERENCE STANDARD 767 Part 4 52-30-03 Page 5 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6010 | BOEING REFERENCE STANDARD 767 Part 4 52-30-02 Page 5 Figure 2. Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6011 | BOEING REFERENCE STANDARD 767 Part 4 57-50-20 Page 6 Figure 2. Material: Titanium. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6011G | BOEING GUIDE 767 Part 4 57-50-20 Page 7 Figure 3. Material: Delrin. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6014 | BOEING REFERENCE STANDARD 767 Part 4 57-50-16 page 6 Figure 2. Material: 7075-T6 or 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6015 | BOEING REFERENCE STANDARD 767 Part 4 57-50-16 Page 6 Figure 3. Material: 7075-T or 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6016 | BOEING REFERENCE STANDARD 767 Part 4 53-10-03 page 4 Figure 2. Material: 7075-T7 or 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6017 | BOEING REFERENCE STANDARD 767 Part 4 -57-50-22 Page 7 Figure 2. Material: 6Al-4V. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6018 | BOEING REFERENCE STANDARD 767 Part 4 57-50-22 Page 9 Figure 3. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6019 | BOEING REFERENCE STANDARD 767 Part 6 52-32-06 Page 6 Figure 2. Material: 7075-T6 on Layer 1, 2, and 3, 2024 on Layer 4. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6022 | BOEING REFERENCE STANDARD 767 Part 4 57-50-15 Page 5 Figure 2. Material: 7075-T6 or 2024, 7050, 7075. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6023 | BOEING REFERENCE STANDARD 767 Part 4 -57-50-21 Page 5 Figure 2. Material: 7075-T7 or Equivalent. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6023P | BOEING TRANSDUCER POSITIONER 767 Part 4 57-50-21 Page 6 Figure 3. Material: Plexiglass or Equivalent. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6024 | BOEING REFERENCE STANDARD 767 Part 6 57-50-10 Page 5 Figure 2. Material: 4330M. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6025-1 | BOEING REFERENCE STANDARD 767 PART 4 57-50-17 FIGURE 2 PAGE 6. MATERIAL MUST BE MANUFACTURE OUT OF 7075-T6 PLATE WITH GRAIN DIRECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6025-2 | BOEING REFERENCE STANDARD 767 PART 4 57-50-17 FIGURE 2 PAGE 6. MATERIAL MUST BE MANUFACTURE OUT OF 7075-T6 PLATE WITH GRAIN DIRECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6025-3 | BOEING REFERENCE STANDARD 767 PART 4 57-50-17 FIGURE 2 PAGE 6. MATERIAL MUST BE MANUFACTURE OUT OF 7075-T6 PLATE WITH GRAIN DIRECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6025-4 | BOEING REFERENCE STANDARD 767 PART 4 57-50-17 FIGURE 2 PAGE 6. MATERIAL MUST BE MANUFACTURE OUT OF 7075-T6 PLATE WITH GRAIN DIRECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6025-5 | BOEING REFERENCE STANDARD 767 PART 4 57-50-17 FIGURE 2 PAGE 6. MATERIAL MUST BE MANUFACTURE OUT OF 7075-T6 PLATE WITH GRAIN DIRECTION. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6025-6 | BOEING REFERENCE STANDARD 767 PART 4 57-50-17 FIGURE 2 PAGE 6. MATERIAL MUST BE MANUFACTURE OUT OF 7075-T6 PLATE WITH GRAIN DIRECTION. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6031-1 | BOEING REFERENCE STANDARD 767 Part 4 57-50-18 Page 5 Figure 2. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6031-2 | BOEING REFERENCE STANDARD 767 Part 4 57-50-18 Page 5 Figure 2. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6031-3 | BOEING REFERENCE STANDARD 767 Part 4 57-50-18 Page 5 Figure 2. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6031-4 | BOEING REFERENCE STANDARD 767 Part 4 57-50-18 Page 5 Figure 2. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6032-1 | BOEING REFERENCE STANDARD 767 Part 4 57-50-19 Page 5 Figure 2. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6032-2 | BOEING REFERENCE STANDARD 767 Part 4 57-50-19 Page 5 Figure 2. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6032-3 | BOEING REFERENCE STANDARD 767 Part 4 57-50-19 Page 5 Figure 2. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6032-4 | BOEING REFERENCE STANDARD 767 Part 4 57-50-19 Page 5 Figure 2. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6033-1 | BOEING REFERENCE STANDARD 767 Part 4 57-50-12 Page 5 Figure 2. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT6033-2 | BOEING REFERENCE STANDARD 767 Part 4 57-50-12 Page 5 Figure 2. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6034 | BOEING REFERENCE STANDARD 767 Part 4 57-50-13 Page 7 Figure 2. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6035-1 | BOEING REFERENCE STANDARD 767 Part 4 57-50-13 Page 8 Figure 3. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6035-2 | BOEING REFERENCE STANDARD 767 Part 4 57-50-13 Page 8 Figure 3. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6038 | BOEING REFERENCE STANDARD 767 Part 4 57-50-25 Page 6 Figure 2. Material: 7050-T7 or Equivalent. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT6041 | BOEING REFERENCE STANDARD 767 Part 4 57-20-03 Page 8 Figure 3. Material: 2024-T3 or 7075-T. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT6045 | BOEING REFERENCE STANDARD 767 PART 4 54-50-08. MATERIAL: 7075-T6 or 7075-T7 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6045-SC1 | Boeing Transducer Guide. Material: Delrin ( Black Acetal). Used with NDT6045 Reference Standard. 767 PART 4 54-50-08 PAGE 15 FIGURE 3 | 1 | |
| NDT6045-SC2 | Boeing Transducer Guide. Material: Delrin ( Black Acetal). Used with NDT6045 Reference Standard. 767 PART 4 54-50-08 PAGE 15 FIGURE 3 | 1 | |
| NDT6046 | BOEING REFERENCE STANDARD 767 Part 4 53-30-02 Page 8 Figure 2. Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT6057 | BOEING REFERENCE STANDARD 767 PART 4 54-50-11 PAGE 7 FIGURE 2. MATERIAL: 15-5 CRES. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6058 | BOEING 767 REFERENCE STANDARD PART 4 53-50-01 FIGURE 2 PAGE 10. MATERIAL: 7075 ALUMINUM. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT6059 | BOEING 767 REFERENCE STANDARD. PART 4 57-50-05 PAGE 8 FIGURE 3. MATERIAL: 15-5PH NORMALIZED. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT6060 | BOEING REFERENCE STANDARD 767 PART 6 57-20-03 FIGURE 3 PAGE 9. MATERIAL: 7075-T6 or 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT6061 | BOEING REFERENCE STANDARD 767 PART 6 57-20-03 FIGURE 3 PAGE 9. MATERIAL: 7075-T6 or 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT6062 | BOEING REFERENCE STANDARD 767 PART 6 57-20-03 FIGURE 3 PAGE 9. MATERIAL: 7075-T6 or 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6064 | BOEING REFERENCE STANDARD 767 PART 6 57-20-03 FIGURE 3 PAGE 9. MATERIAL: 7075-T6 or 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6065 | BOEING REFERENCE STANDARD 767 PART 4 54-50-09 PAGE 12 FIGURE 2. MATERIAL: 2024-T3 OR 7075 SERIES ALUMINUM.. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT607 | BOEING REFERENCE STANDARD 767 Part 6 53-80-02 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6074 | BOEING REFERENCE STANDARD 767 PART 4 54-50-10 FIGURE 2 PAGE 7. MATERIAL: 15-5PH STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6075 | BOEING REFERENCE STANDARD 767 PART 6 53-10-22 FIGURE 2 PAGE 5. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6076 | BOEING REFERENCE STANDARD 767 ..P6 57-20-10 MATERIAL: 7075-T6 OR 2024-T3 ALUMINUM. EXTERNAL LFEC INSPECTION ON STRINGERS6,10,15 AT THE LOWER WING SKIN AT RIBS3, 5, 18 AND 31. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6077 | BOEING REFERENCE STANDARD 767 ..P6 57-20-10 MATERIAL: 7075-T6 OR 2024-T3 ALUMINUM. EXTERNAL LFEC INSPECTION ON STRINGERS6,10,15 AT THE LOWER WING SKIN AT RIBS3, 5, 18 AND 31. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6078 | BOEING REFERENCE STANDARD 767 ..P6 57-20-10 MATERIAL: 7075-T6 OR 2024-T3 ALUMINUM. EXTERNAL LFEC INSPECTION ON STRINGERS6,10,15 AT THE LOWER WING SKIN AT RIBS3, 5, 18 AND 31. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6079 | BOEING REFERENCE STANDARD 767 ..P6 57-20-10 MATERIAL: 7075-T6 OR 2024-T3 ALUMINUM. EXTERNAL LFEC INSPECTION ON STRINGERS6,10,15 AT THE LOWER WING SKIN AT RIBS3, 5, 18 AND 31. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT607A | BOEING REFERENCE STANDARD 767 Part 6 53-80-02 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6080 | BOEING REFERENCE STANDARD 767 PART 6 57-20-03 FIGURE 3 PAGE 9. MATERIAL: 7075-T6 or 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6081 | BOEING REFERENCE STANDARD 767 PART 4 54-50-16 PAGE 5 FIGURE 2 MATERIAL: 15-5PH STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6082 | BOEING REFERENCE STANDARD 767 Part 4 54-50-13 Page 13 Figure 2. Material: 7075-T6 or 7075-T7, 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6083 | BOEING REFERENCE STANDARD 767 Part 4 54-50-13 Page 14 Figure 3. Material: 7075-T7 or 7075-T6, 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6084 | BOEING REFERENCE STANDARD 767 Part 4 54-50-13 Page 15 Figure 4. Material: 7075-T6 or 7075-T7, 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6085 | BOEING REFERENCE STANDARD 767 Part 4 54-50-13 Page 16 Figure 5. Material: 7075-T6 or 7075-T7, 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6086 | BOEING REFERENCE STANDARD 767 Part 4 54-50-13 Page 17 Figure 6. Material: 7075-T6 or 7075-T7, 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6088 | BOEING REFERENCE STANDARD 767 PART 4 54-50-12 PAGE 9 FIGURE 2. MATERIAL: 15-5 CRES. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6089 | BOEING REFERENCE STANDARD 767 PART 4 54-50-15 PAGE 35-37 FIGURE 10 SHEETS 1-3. MATERIAL: 15-5PH STEEL.. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6089-G1 | BOEING TRANSDUCER GUIDE FOR NDT6090 BAT #3. MATERIAL: ACETAL(DELRIN) 767 PART 4 54-50-15 PAGE 28 FIGURE 8 | 1 | |
| NDT6089-G3 | BOEING TRANSDUCER GUIDE FOR NDT6090 BAT #3. MATERIAL: ACETAL(DELRIN) 767 PART 4 54-50-15 PAGE 28 FIGURE 8 | 1 | |
| NDT6089-G4 | BOEING TRANSDUCER GUIDE FOR NDT6090 BAT #3. MATERIAL: ACETAL(DELRIN) 767 PART 4 54-50-15 PAGE 28 FIGURE 8 | 1 | |
| NDT6089-G5 | BOEING TRANSDUCER GUIDE FOR NDT6090 BAT #3. MATERIAL: ACETAL(DELRIN) 767 PART 4 54-50-15 PAGE 28 FIGURE 8 | 1 | |
| NDT6089-G6 | BOEING TRANSDUCER GUIDE FOR NDT6090 BAT #3. MATERIAL: ACETAL(DELRIN) 767 PART 4 54-50-15 PAGE 28 FIGURE 8 | 1 | |
| NDT6090 | BOEING REFERENCE STANDARD 767 PART 4 54-50-15 PAGE 38-40 FIGURE 10 SHEETS 1-3. MATERIAL: 15-5PH STEEL.. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6090-G1 | BOEING TRANSDUCER GUIDE FOR NDT6090 BAT #3. MATERIAL: ACETAL(DELRIN) 767 PART 4 54-50-15 PAGE 28 FIGURE 8 | 1 | |
| NDT6090-G2 | BOEING TRANSDUCER GUIDE FOR NDT6090 BAT #3. MATERIAL: ACETAL(DELRIN) 767 PART 4 54-50-15 PAGE 28 FIGURE 8 | 1 | |
| NDT6091 | BOEING REFERENCE STANDARD 767 PART 4 54-50-14 PAGE 26 FIGURE 2. MATERIAL: 15-5 CRES. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6091G1 | NDT6091 REFERENCE STANDARD TRANSDUCER GUIDE. MATERIAL: DELRIN(ACETAL) 767 PART 4 54-50-14 PAGE 26 FIGURE 2. | 1 | |
| NDT6091G2 | NDT6091 REFERENCE STANDARD TRANSDUCER GUIDE. MATERIAL: DELRIN(ACETAL) 767 PART 4 54-50-14 PAGE 26 FIGURE 2. | 1 | |
| NDT6092 | BOEING REFERENCE STANDARD 767 PART 4 54-50-14 PAGE 27 FIGURE 3. MATERIAL: 15-5 CRES. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6092G1 | NDT6092 REFERENCE STANDARD TRANSDUCER GUIDE. MATERIAL: DELRIN(ACETAL) 767 PART 4 54-50-14 PAGE 27 FIGURE 3 | 1 | |
| NDT6092G2 | NDT6092 REFERENCE STANDARD TRANSDUCER GUIDE. MATERIAL: DELRIN(ACETAL) 767 PART 4 54-50-14 PAGE 27 FIGURE 3 | 1 | |
| NDT6094 | BOEING REFERENCE STANDARD 767 PART 4 54-50-14 PAGE 29 FIGURE 5. MATERIAL: 15-5 CRES. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6096 | BOEING REFERENCE STANDARD 767 PART 4 53-60-02 FIGURE 2 PAGE 6. MATERIAL: 2024-T3 ALUMINUM WITH GRAIN DIRECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6100 | BOEING REFERENCE STANDARD 767 PART 4 57-10-03 PAGE 6 FIGURE 2 MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6102 | BOEING REFERENCE STANDARD. MATERIAL: 6AL-4V TITANIUM. Includes Test Report Traceable to NIST. | 1 | |
| NDT6103 | BOEING REFERENCE STANDARD 767 PART 4 54-50-17 PAGE 5 FIGURE 2. MATERIAL: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6104 | BOEING REFERENCE STANDARD. MATERIAL: 6AL-4V TITANIUM. Includes Test Report Traceable to NIST. | 1 | |
| NDT6105 | BOEING REFERENCE STANDARD 767 PT 6 53-50-16 PAGE 5 FIGURE 2. MATERIAL: 2024-T3 ALUMINUM. Includes Certification Report | 1 | |
| NDT6109 | BOEING REFERENCE STANDARD BOEING REFERENCE STANDARD 767 PART 6 57-20-01. Includes Test Report and Certificate of Conformance. MATERIAL: 7075-T6, 2024-T3 CLAD OR BARE ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6110A | BOEING 767 REFERENCE STANDARD PART 6 57-20-08 FIGURE 4 SHEETS 1&2 PAGES 9&10. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6110B | BOEING 767 REFERENCE STANDARD PART 6 57-20-08 FIGURE 4 SHEETS 1&2 PAGES 9&10. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6110C | BOEING 767 REFERENCE STANDARD PART 6 57-20-08 FIGURE 4 SHEETS 1&2 PAGES 9&10. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6110D | BOEING 767 REFERENCE STANDARD PART 6 57-20-08 FIGURE 4 SHEETS 1&2 PAGES 9&10. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6110E | BOEING 767 REFERENCE STANDARD PART 6 57-20-08 FIGURE 4 SHEETS 1&2 PAGES 9&10. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6111A | BOEING 767 REFERENCE STANDARD PART 6 57-20-08 Figure 5, Sheets 1-2. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6111B | BOEING 767 REFERENCE STANDARD PART 6 57-20-08 Figure 5, Sheets 1-2. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT614 | BOEING REFERENCE STANDARD 767 Part 4 57-20-01 Page 4 Figure 2. Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT616 | BOEING REFERENCE STANDARD 767 Part 4 27-40-01 Page 4 Figure 2. Matierial: 7075-T7 (Preferred) or 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT616P | BOEING 767 CONVEX TRANSDUCER POSITIONER Part 4 27-40-01 page 5 Figure 3. Material: Plexiglass or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT617 | BOEING REFERENCE STANDARD 767 Part 6 53-80-03 Page 6 Figure 2. Material: 4330M or 4340M. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT618 | BOEING REFERENCE STANDARD 767 Part 6 53-80-03 Page 7 Figure 3. Material: 4330M or 4340M. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT618A | BOEING REFERENCE STANDARD 767 Part 6 53-80-03 Page 8 Figure 3. Material: 4330M or 4340M. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT619 | BOEING REFERENCE STANDARD 767 Part 4 55-10-04 Page 5 Figure 2. Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT620 | BOEING REFERENCE STANDARD 767 Part 4 53-60-01 Page 5 Figure 2. Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT622 | BOEING REFERENCE STANDARD 767 Part 6 57-20-01 Page 5 Figure 2. Material: 7075-T6. Includes Test Report and Certificate of Confromance. | 4 | |
| NDT623 | BOEING REFERENCE STANDARD 767 Part 4 57-10-03 Page 5 Figure 2. Material: 2024-T3 or Equivalent. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT624 | BOEING REFERENCE STANDARD 767 Part 4 53-80-02 Page 6 Figure 2. Material: 7075-T6 or 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT625 | BOEING REFERENCE STANDARD 767 Part 4 55-10-03 Page 4 Figure 2. Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT627 | BOEING REFERENCE STANDARD 767 Part 4 57-10-02 Page 5 Figure 3. Material: 7075-T6 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT630 | BOEING REFERENCE STANDARD 767 Part 4 55-10-02 Page 5 Figure 2. Material: Aluminum. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT631 | BOEING REFERENCE STANDARD 767 Part 4 71-20-01 Page 6 Figure 2. Material: 15-5 PH or 4130, 4140, 4340. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT632 | BOEING REFERENCE STANDARD 767 Part 4 71-20-01 Page 7 Figure 3. Material: 15-5 PH or 4130, 4140, 4340. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT633 | BOEING REFERENCE STANDARD 767 Part 6 54-51-02 Page 9 Figure 2. Material: 4330, 4330M, 4340, 4340M. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT634 | BOEING REFERENCE STANDARD 767 Part 4 54-50-02 Page 5 Figure 2. Material: 15-5PH or 4330M, 4340M. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT636 | BOEING REFERENCE STANDARD 767 Part 4 32-10-03 Page 4 Figure 2. Material: 4140, 4330, 4340, 4330M, or 4340M. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT637 | BOEING REFERENCE STANDARD 767 Part 4 32-10-04 Page 7 Figure 2. Material: 4330 or 4340. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT637P1 | BOEING TRANSDUCER POSITIONER 767 Part 4 32-10-04 Page 9 Figure 3. Material: Plexiglass. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT637P2 | BOEING TRANSDUCER POSITIONER 767 Part 4 32-10-04 Page 10 Figure 3. Material: Plexiglass. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT637P3 | BOEING TRANSDUCER POSITIONER 767 Part 4 32-10-04 Page 11 Figure 3. Material: Plexiglass. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT638 | BOEING REFERENCE STANDARD 767 Part 4 57-40-02 Page 5 Figure 2. Material: 7075-T6 or 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT638G | BOEING TRANSDUCER POSITIONER 767 Part 4 57-40-02 Page 7 Figure 4. Material: Plexiglass. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT638PL | BOEING TRANSDUCER GUIDE 767 Part 4 57-40-02 Page 6 Figure3. Material: Plexiglass. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT638PR | BOEING TRANSDUCER GUIDE 767 Part 4 57-40-02 Page 6 Figure3. Material: Plexiglass. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT639 | BOEING REFERENCE STANDARD 767 Part 4 54-50-02 Page 6 Figure 3. Material: 15-5 PH or 4330M , 4340M. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT640 | BOEING REFERENCE STANDARD 767 Part 4 54-50-01 Page 5 Figure 2. Material: 15-5 PH or 4330M, 4340M. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT641 | BOEING REFERENCE STANDARD 767 Part 4 54-50-01 Page 6 Figure 3. Material: 15-5 PH or 4330M, 4340M. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT642 | BOEING REFERENCE STANDARD 767 Part 4 53-50-02 Page 6 Figure 2. Material: 7075-T6 or Equivalent. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT650 | BOEING REFERENCE STANDARD 767 Part 6 Page 4 Figure 2. Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT655 | BOEING REFERENCE STANDARD 767 Part 4 54-50-03 Page 7 Figure 4. Material: 7075-T6 or 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT655G | BOEING TRANSDUCER GUIDE 767 Part 4 54-50-03 Page 9 Figure 4. Material: Plexiglass. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT656 | BOEING REFERENCE STANDARD 767 Part 4 54-50-03 Page 8 Figure 3. Material: 7075-T6 or 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT656G | BOEING TRANSDUCER GUIDE 767 Part 4 54-50-03 Page 9 Figure 4. Material: Plexiglass. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT657 | BOEING REFERENCE STANDARD 767 Part 6 53-10-09 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT658 | BOEING REFERENCE STANDARD 767 Part 4 53-10-01 Page 5 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT660 | BOEING REFERENCE STANDARD 767 Part 6 53-80-04 Page 11 Figure 3. Material: 7075-T6 Bare and Clad. Includes Test Report and Certificate of Conformance. | 4 | |
| NDT661 | BOEING REFERENCE STANDARD 767 Part 4 53-30-01 Page 5 Figure 2. Material: 7075-T6 or 7075-T7. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT662 | BOEING REFERENCE STANDARD 767 PART 4 57-20-03 PAGE 6 FIGURE 2. MATERIAL: 2024-T3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT663A | BOEING REFERENCE STANDARD 767 Part 6 53-10-13 Page 7 Figure 3. Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT663B | BOEING REFERENCE STANDARD 767 Part 6 53-10-13 Page 7 Figure 3. Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT664 | BOEING REFERENCE STANDARD 767 Part 6 57-20-06 Page 8 Figure 2. Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT666A | BOEING REFERENCE STANDARD 767 Part 6 57-20-08 Page 8 Figure 3. Material 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT666B | BOEING REFERENCE STANDARD 767 Part 6 57-20-08 Page 9 Figure 4. Material 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT666C | BOEING REFERENCE STANDARD 767 Part 6 57-20-08 Page 10 Figure 5. Material 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT667 | BOEING REFERENCE STANDARD 767 Part 4 54-50-05 Page 7 Figure 2. Material: 15-5 PH or 4130. Includes Test Report and Certificate of Conformance. | 4 | |
| NDT668 | BOEING REFERENCE STANDARD 767 Part 6 57-50-01 Page 5 Figure 2. Material: 15-5 PH. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT669 | BOEING REFERENCE STANDARD 767 Part 4 3210-05 Page 5 Figure 2. Material: 4330 or 4340. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT669P | BOEING TRANSDUCER POSITIONER 767 Part 4 32-10-05 Page 6 Figure 3. Material: Plexiglass. Includes Certificate of Conformance. | 1 | |
| NDT670 | BOEING REFERENCE STANDARD 767 Part 4 53-10-02 Page 5 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT671 | BOEING REFERENCE STANDARD 767 Part 6 53-30-12 Page 4 Figure 2. Material: 7075-T6 or 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT672 | BOEING REFERENCE STANDARD 767 Part 6 54-50-01 Page 4 Figure 2. Material: 15-5 PH or 4130. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT675 | BOEING REFERENCE STANDARD 767 Part 4 54-50-06 Page 15 Figure 4. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT676 | BOEING REFERENCE STANDARD FOR PW4000 and JT9D-7R4D/E STRUTS FIGURE 2 Part 4 54-50-07 page 9 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT680 | BOEING REFERENCE STANDARD 767 Part 4 32-10-06 Page 5 Figure 2. Material: 4340M. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT682 | BOEING REFERENCE STANDARD 767 Part 6 53-80-02 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 4 | |
| NDT684 | BOEING REFERENCE STANDARD 767 Part 6 52-32-02 Page 5 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT685 | BOEING REFERENCE STANDARD 767 Part 6 53-10-018 Page 5 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT686 | BOEING REFERENCE STANDARD 767 Part 6 53-50-09 Page 5 Figure 3. Material: 7075-T6 or Equivalent. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT688 | BOEING REFERENCE STANDARD 767 Part 4 57-50-03 Page 8 Figure 2. Material: 7075-T6. Includes Test Report and Certificate of Conformance | 3 | |
| NDT689 | BOEING REFERENCE STANDARD 767 Part 4 57-50-06 Page 6 Figure 2. Material: 4340. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT689P | BOEING TRANSDUCER POSTIONER 767 Part 4 57-540-06 Page 7 Figure 3. Material: Delrin. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT690-P1 | POSITIONER PT 4 57-50-04. MATERIAL: ACETAL(DELRIN). Includes Certificate of Conformance. | 3 | |
| NDT690-P2 | POSITIONER PT 4 57-50-04. MATERIAL: ACETAL(DELRIN). Includes Certificate of Conformance. | 3 | |
| NDT690-P3 | POSITIONER PT 4 57-50-04. MATERIAL: ACETAL(DELRIN). Includes Certificate of Conformance. | 3 | |
| NDT691 | BOEING REFERENCE STANDARD 767 Part 6 57-50-08 Page 6 Figure 2. Material: 4340M. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT693 | BOEING REFERENCE STANDARD 767 Part 4 53-50-04 Page 6 Figure 4. Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT694 | BOEING REFERENCE STANDARD 767 Part 4 57-50-05 Page 8 Figure 3. Material: 15-5 PH. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT695 | BOEING REFERENCE STANDARD 767 Part 4 57-50-05 Page 8 Figure 3. Material: 15-5 PH. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT697 | BOEING REFERENCE STANDARD 767 Part 4 -57-50-07 Page 5 Figure 2. Material: 15-5 PH. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT698 | BOEING REFERENCE STANDARD 767 Part 4 57-50-03 Page 9 Figure 3. Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT7031A | BOEING REFERENCE STANDARD 777-200/300 PART 4 57-20-14 PAGE 6 FIGURE 2. MATERIAL: 7055-T7751, OR AIRPLANE QUALITY ALUMINUM. INCLUDES TEST REPORT AND CE | 2 | |
| NDT7031B | BOEING REFERENCE STANDARD 777-200/300 PART 4 57-20-15 PAGE 11-12 FIGURE 2, SHEET 1&2 AND PART 4 57-20-13 PAGE 6 FIGURE 2. MATERIAL: 7055-T7751, OR AIR | 2 | |
| NDT7031C | BOEING REFERENCE STANDARD 777-200/300 PART 4 57-20-15 PAGE 13 FIGURE 2, SHEET 3. MATERIAL: 7055-T7751, OR AIRPLANE QUALITY ALUMINUM. INCLUDES TEST RE | 2 | |
| NDT710 | CUSTOM NAVY BLOCK. MATERIAL: 304 STAINLESS STEEL ,CONTAINING 20 FASTENER HOLES (.156-.750) WITH A TOTAL OF 71 EDM NOTCHES NOTCHES. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT730 | Boeing Custom Contact Radius Shoe WS400 with a 0.400" radius. Material: Lucite/Cast Acrylic. 787 Part 4 51-00-23. Includes Certificate of Conformance. | 1 | |
| NDT731 | BOEING REFERENCE STANDARD 777 Part 4 53-40-01 Page 5 Figure 2. Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT732A | BOEING REFERENCE STANDARD 777 Part 6 55-17-03 Page 7 Figure 2. Material: 6AL-4V. IncludesTest Report and Certificate of Conformance. | 2 | |
| NDT733 | BOEING REFERENCE STANDARD 777 Part 4 53-40-03 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT735 | BOEING REFERENCE STANDARD 777 Part 4 53-40-02 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT736 | BOEING 777 REFERENCE STANDARD PART 4 53-60-02 FIGURE 2 PAGE 6. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT737 | BOEING REFERENCE STANDARD 777 Part 6 53-50-03 Page 9 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT738 | BOEING REFERENCE STANDARD 777 Part 4 53-10-02 Page 6 Figure 2. Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT739 | BOEING REFERENCE STANDARD 777 Part 4 53-10-02 Page 7 Figure 3. Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT740 | BOEING REFERENCE STANDARD 777 Part 4 53-10-01 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT744 | BOEING REFERENCE STANDARD 777 Part 6 53-10-09 Page 4 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT746 | BOEING REFERENCE STANDARD 777 Part 6 53-60-07 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT748 | BOEING REFERENCE STANDARD 777 Part 4 54-51-01 Page 14 Figure 2. Material: 15-5PH. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT753 | BOEING REFERENCE STANDARD 777 Part 4 57-20-04 Page 9 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT754 | BOEING 777 REFERENCE STANDARD PART 6 53-80-03 FIGURE 3 PAGE 5. MATERIAL: 2024-T351 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT755 | BOEING REFERENCE STANDARD 777 Part 6 53-60-07 Page 8 Figure 3. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT756 | BOEING REFERENCE STANDARD Part 6 53-60-07 Page 9 Figure 4. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT760 | BOEING REFERENCE STANDARD 777 Part 6 53-60-06 Page 6 Figure 2. Material: 7075-T7. IncludesTest Report and Certificate of Conformance. | 2 | |
| NDT762 | BOEING 777 REFERENCE STANDARD PART 4 54-51-02 FIGURE 2 PAGE 8. MATERIAL: 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT771 | BOEING REFERENCE STANDARD 777 Part 4 57-10-05 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT774 | BOEING REFERENCE STANDARD 777 Part 4 57-10-05 Pag e8 Figure 3. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT776 | BOEING REFERENCE STANDARD 777-200/300 Part 4 54-51-03 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT779 | BOEING REFERENCE STANDARD 777 Part 4 C968754-51-01 Page 15 Figure 3. Material: 15-5PH. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT786-A | BOEING REFERENCE STANDARD 777 Part 6 57-10-04 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT786-B | BOEING REFERENCE STANDARD 777 Part 6 57-10-04 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT787 | BOEING REFERENCE STANDARD 777-200/300 Part 6 53-80-06 Page 8 Figure 2. Material: 2024-T3. IncludesTest Report and Certificate of Conformance. | 2 | |
| NDT797 | BOEING REFERENCE STANDARD 777-200/300 PART 4 53-40-06 PG.11 FIGURE 2. MATERIAL: 7075-T7 ALUMINUM WITH GRAIN DIRECTION. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT815 | BOEING REFERENCE STANDARD 787 Part 4 57-10-01 Page 10 Figure 2. Material: 2024 or 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT816 | BOEING REFERENCE STANDARD 787 part 4 57-10-02 Figure 2. MATERIAL: 6AL-4V TITANIUM. Includes Certification Report and Certificate of Conformance. | 2 | |
| NDT817 | BOEING REFERENCE STANDARD 787 Part 4 51-00-23 Page 5 Figure 2. Material: Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NF17-8T | BLOWER, PNEUMATIC | 1 | |
| NG17-87 | BLOWER PNEUMATIC | 1 | |
| NO41MC | NORTECH PNEUMATIC VACUUM | 1 | |
| NP4155 | BELT SANDER PNEUMATIC, NORDBERG, NP4155 | 1 | |
| NRK-3I | CUSTOM NAVY BLOCK. MATERIAL: 718 INCONEL CONTAINING 20 FASTENER HOLES (.156-.750) WITH A TOTAL OF 71 EDM NOTCHES. Includes Test Report and Certificate of Conformance. | 1 | |
| NRK-3S/17-4 | CUSTOM NAVY REFERENCE STANDARD. MATERIAL: 17-4PH TH1050 STAINLESS STEEL. CONTAINS 20 FASTENER HOLES (.156-.750) WITH A TOTAL OF 71 EDM NOTCHES. Includes Test Report and Certificate of Conformance. | 1 | |
| NRK-3S/17-7 | CUSTOM NAVY REFERENCE STANDARD. MATERIAL: 17-7PH STAINLESS STEEL. CONTAINS 20 FASTENER HOLES (.156-.750) WITH A TOTAL OF 71 EDM NOTCHES. Includes Test Report and Certificate of Conformance. | 1 | |
| NRK-3S/400SS | CUSTOM NAVY EDDY CURRENT BLOCK. Material: 400 Stainless Steel. 3 Plate assembly measuring 4" x 7" x .875", Contains 20 fastener holes with diameters ranging from .156" – .750"., 71 EDM notches in various locations (notch depth & lengths vary), Widths for | 1 | |
| NRK-3S/HX | CUSTOM NAVY EDDY CURRENT BLOCK. Material: Hastelloy X, 3 Plate assembly measuring 4" x 7" x .875", Contains 20 fastener holes with diameters ranging from .156" – .750"., 71 EDM notches in various locations (notch depth & lengths vary), Widths for all notc | 1 | |
| NRK-3SS | CUSTOM NAVY BLOCK. MATERIAL: 304 STAINLESS STEEL ,CONTAINING 20 FASTENER HOLES (.156-.750) WITH A TOTAL OF 71 EDM NOTCHES NOTCHES. Includes Test Report and Certificate of Conformance. | 1 | |
| NRK-3ST | CUSTOM NAVY EDDY CURRENT BLOCK. Material: 4340 Cres Steel. 3 Plate assembly measuring 4" x 7" x .875", Contains 20 fastener holes with diameters ranging from .156" – .750"., 71 EDM notches in various locations (notch depth & lengths vary), Widths for all | 1 | |
| NRK-3T | CUSTOM NAVY EDDY CURRENT BLOCK. Material: 6AL-4V Titanium 3 Plate assembly measuring 4" x 7" x .875", Contains 20 fastener holes with diameters ranging from .156" – .750"., 71 EDM notches in various locations (notch depth & lengths vary), Widths for all n | 1 | |
| NSS-4PD-NITROX | REGULATED 4-CYLINDER, 4-BANK CABINET WITH PNEUMATIC DOOR, 3-WAY NITROX/AIR VALVE AND NUVAIR PRO O2 OXYGEN ANALYZER | 1 | |
| NUMATIC AVQ 250-2 | PORTABLE VACUUM CLEANER SUPPLY -400 HZ/115V (NUMATIC) | 1 | |
| NUMATIC RSAV 130 | NUMATIC RSAV 130 6L 115 VOLT/ 400 HZ BACKPACK AIRPLANE VACUUM CLEANER | 1 | |
| NUMATICAVQ250-2 | PORTABLE VACUUM CLEANER SUPPLY -400 HZ/115V (NUMATIC) | 1 | |
| NUT-RUNNER | PNEUMATIC NUT RUNNER TOOL | 1 | |
| NUT-RUNNER-2 | PNEUMATIC NUT RUNNER TOOL | 1 | |
| NWP25306 | 3PK ABSRB MAT PD | 1 | |
| NWP57703 | 3ABSRB MATROLLS WFREE DSPNSR | 1 | |
| NWPNPC25201 | PIG UNI LGHTWGHT ABSRB MAT ROL | 1 | |
| NWPNPC25300 | 100-SHEETS ABSRB MAT PD | 1 | |
| NYZ7000MDKIT | KIT, MASTIC REMOVAL, MASTER, PNEUMATIC | 3 | |
| NYZ7000S | NYROC BLADE PNEUMATIC SHARPENER | 1 | |
| OB-30 | PNEUMATIC REGULATOR | 4 | |
| OBAWAO 80041-04 | PMAT ARINC CONNECTOR | 1 | |
| OBAWO80041-01 | CABLE TECSTAR, PMAT 2000 TO CF34-10E FADEC | 1 | |
| OCT-41 | HOIST - FISHPOLE MIN 500 LB CAPACITY &40 FT CABLE & LOAD LIMITER (MANUAL AND PNEUMATIC DRIVE) | 1 | |
| OMAT 4 / 72 | OMAT4/72 KIT - RAPID RELUBRICATION SYSTEM 2EA | 2 | |
| OMAT 4 / 76 | KIT APPLICATOR NO.4 TRENT 900 FOR OMAT | 3 | |
| OMAT4-72/RB211 | OMAT4/72 KIT - RAPID RELUBRICATION SYSTEM 2EA | 1 | |
| OMAT4-76 | KIT APPLICATOR NO.4 TRENT 900 FOR OMAT | 3 | |
| OMAT4/72 | OMAT4/72 KIT - RAPID RELUBRICATION SYSTEM 2EA | 2 | |
| ONX-2XX-DOC-INFOSHEET | ONX-2XX-DOC-INFOSHEET;OneExpert 2XX - Information and Safety Sheet | 1 | |
| OTDR-ATE | OTDR-ATE;Reference Fiber Box SM or MM for OTDR Automatic Test Equipment designed for JDSU Service Center | 1 | |
| P-147-3724 | PNEUMATIC AND HYDRAULIC HEADER TOOL | 1 | |
| P-2041 | HEAVY-DUTY PNEUMATIC SCISSOR | 1 | |
| P/N: 171 865 | QTY, 1 EA NUTADAPTOR;OEM P/N: BL171865D18570.0703OEM: SPXL/SPIETHOEM P/N: 171 865OEM: BRAN LUEBBE;DRAWING: SA-JER-AR141-ARBX-270013 (H3-OA3)POS: NO.40;MATERIAL: CARBON STEELMATERIAL GRADE: 5.8;THREAD DIAMETER: M16THREAD PITCH: 1.5 MMTHREAD SERIES: METRI | 1 | |
| P2 | PMAT 2000 WITH GEENHANCEMENTS (ALTERNATE PROCUREMENT P/N P2K−GE−02) | 1 | |
| P2505 | PNEUMATIC ENGRAVING PEN PRO P2505 | 1 | |
| P2505 PRO | LÁPIZ DE GRABADO NEUMÁTICO PRO P2505 | 1 | |
| P2K-615A-05 | PMAT 2000 Kit, Boeing EFB with 615A | 2 | |
| P2K-615A-06 | PMAT 2000 Kit, ARINC 615A and 614 Data Loader Kit | 3 | |
| P2K-ABA)1 | PMAT 2000 | 1 | |
| P2K-ABF-01 | PMAT 2000 | 2 | |
| P2K-ABF-02 | PMAT 2000 Kit, Airbus Core Image Software Parts Sig. Val. | 6 | |
| P2K-EMB-02 | PMAT 2000 - SPECIAL LAPTOP | 6 | |
| P2K-EMB-02. | SPECIAL COMPUTER PMAT2000 | 6 | |
| P2K-EMB02 | Set,Pmat 2000 | 6 | |
| P2K-GE-02 | PMAT 2000 KIT, GEAE CF-34 | 1 | |
| P2K-GE-09 | PMAT 2000 Kit, GEAE CF-34 | 3 | |
| P2K-GE-11 | PMAT 2000 KIT, GEAE F404/414 | 1 | |
| P2K-GE-12 | PMAT 2000 Kit, GEAE F404/414 | 1 | |
| P2K-GE-16 | PMAT 2000 Kit, GEAE EEC-700 FADEC Support | 1 | |
| P2K-GENX-01 | KIT - DATA LOADER, PMAT2000 | 1 | |
| P2K-GENX-02 | PMAT 2000 Kit, GENX FADEC Data Loader | 1 | |
| P2K-GE−02 | PMAT 2000 WITH GEENHANCEMENTS (ALTERNATE PROCUREMENT P/N P2K-GE−09) | 1 | |
| P2K-GE−09 | PMAT 2000 WITH GEENHANCEMENTS (ALTERNATE PROCUREMENT P/N P2K-GE−02) | 3 | |
| P2K-LDS-07 | PMAT 2000 KIT, ARINC | 1 | |
| P2K-LDS-08 | PMAT 2000 Kit, ARINC 615-3 Data | 5 | |
| P2K-LDS-09 | PMAT 2000 Kit, ARINC/GE FADEC | 4 | |
| P2K-USBL-01 | PMAT CABLE | 1 | |
| P2K615A05 | DRIVE - EXTERNAL, CD-ROM (PMAT2000 ONLY) | 2 | |
| P2K615A06 | KIT: MAINTENANCE,PMAT 2000, W/CABLES & BATTERIES,80000-05 | 3 | |
| P2KABF01 | PMAT2000 KIT | 2 | |
| P2KABF02 | PMAT2000 KIT | 6 | |
| P2KEMB02 | PMAT 2000 KIT | 6 | |
| P2KLDS08 | KIT PMAT 2000 | 5 | |
| P2KLDS09 | DATA LOADER PMAT 2000 | 4 | |
| P2K‐LDS09 | PMAT 2000 KIT | 4 | |
| P2K−GE−02 | PMAT 2000 with GEEnhancements (Alternate Procurement P/N P2K−GE−09) | 1 | |
| P2K−GE−09 | PMAT 2000 with GEEnhancements (Alternate Procurement P/N P2K−GE−02) | 3 | |
| P3032-3 | Portable Pneumatic Deadweight Tester | 1 | |
| P33712M030 | PNEUMATIC UNIT | 1 | |
| P580 | PNEUMATIC SCISSOR | 2 | |
| PA-100 | PNUMATIC ACCESORY | 1 | |
| PA-133 | HYDRAULIC PUMP – PNEUMATIC DRIVEN | 6 | |
| PA11-141 | TIRE COVERS (no wheelpant faring) (specify material type) (set of 2) | 1 | |
| PA12-171 | TIRE COVERS (no wheelpant faring) (specify material type) (set of 2) | 1 | |
| PA133 | PNEUMATIC PUMP | 6 | |
| PA18-500 | TIRE COVERS (no wheelpant faring) (specify material type) (set of 2) | 1 | |
| PA20-121 | TIRE COVERS (no wheelpant faring) (specify material type) (set of 2) | 1 | |
| PA203-003 | PNEUMATIC POP RIVETERS | 1 | |
| PA28-160 | FRONT WHEELPANT/STRUT COVER (specify material type) | 1 | |
| PA28-165 | MAIN GEAR WHEELPANT COVERS (specify material type) (set of 2) | 1 | |
| PA28-166 | TIRE COVERS, aircraft without wheelpants (specify material type) (set of 3) | 1 | |
| PA32-360 | FRONT WHEELPANT/STRUT COVER (specify material type) | 1 | |
| PA32-365 | MAIN GEAR WHEELPANT COVERS (specify material type) (set of 2) | 1 | |
| PA80 | PNEUMATIC DRIVE UNIT | 1 | |
| PBRHOSE | PNEUMATICBRAKE PRESSURE HOSE | 1 | |
| PBT1100 | Pneumatic Banding Tool for .250 Wide Welded EMI/RFI Shield Bands | 2 | |
| PCM-CR-U2EX-LF | FUNCTIONAL UNIT FOR AUTOMATIC DATA PROCESSING MACHINE CALLED MEMORY CARD READER | 2 | |
| PCW42 | AUTOMATIC WIRE STRIPPER | 1 | |
| PD-60 | PROTECTIVE CAP FOR PNEUMATIC CONNECTIONS | 4 | |
| PD89MME636 | CONSOLE,PNEUMATIC B | 1 | |
| PDR3000A | 3/8" CAPACITY REVERSIBLE PNEUMATIC DRILL (RED) | 2 | |
| PDR3001 | 3/8" CAPACITY KEYLESS CHUCK REVERSIBLE PNEUMATIC DRILL (RED) | 1 | |
| PDR5000A | PNEUMATIC DRILL 1/2 | 1 | |
| PDXF2K7 | AVIATION PNEUMATIC DRILLS | 1 | |
| PDYT1KH | 1/4 “ CAPACITY KEYED CHUCK REVERSIBLE .3HP 3,000RPM PNEUMATIC DRILL | 1 | |
| PF51-003-1 | HOIST - FISHPOLE MIN 500 LB CAPACITY & 40 FT CABLE & LOAD LIMITER (MANUAL AND PNEUMATIC DRIVE) | 11 | |
| PF51-003-1 | HOIST – FISHPOLE , PNEUMATIC | 11 | |
| PF51-008-1 | HOIST - FISHPOLE, PNEUMATIC POWERED, 500 LB. CAPACITY, 40 FOOT CABLE | 4 | |
| PF51-009-01 | FISH POLE HOIST-PNEUMATIC POWERED 500LB CAP. | 1 | |
| PF51-009-1 | HOIST - FISHPOLE, PNEUMATIC POWERED, | 12 | |
| PF51-011 | HOIST - FISHPOLE, PNEUMATIC POWERED OR MANUAL, 500 LBS CAPACITY | 1 | |
| PH50D | PNEUMATIC HAMMER GUN (SNAP- ON,USA) | 1 | |
| PHG60B | LONG PNEUMATIC DRVR A1310B 12I | 1 | |
| PHX3 | Pneumatic Crimp Tool | 2 | |
| PMAT 2000 | PORTABLE MAINTENANCE ACCESS TERMINAL (PMAT) WITH FADEC NVM FAULT CODE DOWNLOAD SOFTWARE (PORTABLE PMAT 2000) | 1 | |
| PMAT 2000 80000-05 | TELEDYNE PMAT 2000 PORTABLE MAINTENANCE ACCESS TERMINAL/DATA LOADER | 1 | |
| PMAT 2000 KIT | PMAT XS DOCKING STATION AND POWER SUPPLY | 1 | |
| PMAT PC GETAC S410 | PMAT | 1 | |
| PMAT XS | PMAT XS | 1 | |
| PMAT-2000 | KIT: MAINTENANCE,PMAT 2000, W/CABLES & BATTERIES | 1 | |
| PMAT-V4-STD3-ATR | PMAT V4 - STD 3 FOR ATR 72 600 | 1 | |
| PMAT-XS | PMAT XS | 1 | |
| PMAT-XS (CALIB) | PMAT XS | 1 | |
| PMAT2000 | PMAT 2000 - SPECIAL LAPTOP | 1 | |
| PMBT1200 | Pneumatic Banding Tool for .125 Wide Welded EMI/RFI Shield Bands | 2 | |
| PMT1005 | (MTO)-PNEUMATIC GMT1005 TOOL | 1 | |
| PMT1006 | Pneumatic Powered Commercial Crimp Tool | 2 | |
| PMT221 | (MTO)-PNEUMATIC CRIMP TOOL | 1 | |
| PMT232 | Pneumatic Crimp Tool for M81824/1-/3 Splices | 2 | |
| PMT317 | (MTO)-PNEUMATIC CRIMP TOOL | 1 | |
| PMT400 | (MTO)-PNEUMATIC CRIMP TOOL | 1 | |
| PMTB232 | Pneumatic Crimp Tool with Foot Valve | 2 | |
| PMTB352 | (MTO)-PNEUMATIC CRIMP TOOL | 1 | |
| PN 1945-04-08 | 737 NEXT GEN ENGINE PNEUMATIC TEST KIT | 1 | |
| PN28516 | PNEUMATIC SANDER (PN28516 3M RAND OM ORB IT AL SAND ER ELIT E SERIES 6 IN) | 1 | |
| PNEU RIG INSTL. | ELEC INSTALLATION OF PNEUMATIC RIG. | 1 | |
| PNEU RIG MANF | ELEC MANUFACTURE OF PNEUMATIC RIG. | 1 | |
| PNEUMATIC | 757 PNEUMATIC TEST KIT TOOL | 1 | |
| PNEUMATIC DRILL | PNEUMATIC DRILL 1/2" | 1 | |
| PNEUMATIC HACK SAW | PNEUMATIC HACK SAW | 1 | |
| PNEUMATIC HOLDING FIXTURE 2 | PNEUMATIC HOLDING FIXTURE | 1 | |
| PNR 58634 | Pneumatic Bench Vise Model BV-101-P | 1 | |
| PNT800L-PC | PHEUMATIC RIVET NUT TOOL | 1 | |
| PNU-BLEED TEST SET | PNEUMATIC BLEED TEST SET TOOL | 1 | |
| POR0002 | Bowers POR0002 CV Instrumatic Portable Tester Model 2 Rockwell A | 1 | |
| POR0003 | Bowers POR0003 CV Instrumatic Portable Tester Model 3 Vickers Pyramid | 1 | |
| POR0006 | Bowers POR0006 CV Instrumatic Portable Tester Model 6 Brinell | 1 | |
| PPG-125/5 | PENCIL PROBE GUIDE, .750"Ø x .500" H FOR .125"Ø PROBE TIPS. MATERIAL: DELRIN OR EQUIVALENT. | 1 | |
| PPTS | TOOL - PNEUMATIC INSTALLATION, TIE STRAP | 2 | |
| PR-520 | LIGHT PHOTOMETER - HANDHELD. SYSTEM INCLUDES PR524 LITEMATE-4 (ILLUMINANCE METER), PR-522 SPOTMATE OPTICS ATTACHMENT ( (PHOTO RESEARCH INC.) | 1 | |
| PR-524 | LIGHTMATE PHOTOMETER | 1 | |
| PR36 | PNEUMATIC RIVIT GUN | 2 | |
| PR504 | METER - LIGHT, HANDHELD (LITEMATE III PHOTOMETER) | 1 | |
| PR9143B | COMPARATOR PNEUMATIC | 1 | |
| PRC2 | PNEUMATIC PRC GUN | 1 | |
| PREPAYADDSHIPPING | All shipping carrier charge, tax & duty are the customer’s ultimate responsibility. The amount presented here is the best current information. If final carrier invoice exceeds amount charged at time of order processing, customer is responsible for balance | 1 | |
| PRG510A | PNEUMATIC POP RIVET | 3 | |
| PRG510A PRG | PNEUMATIC POP RIVET | 1 | |
| PRG510A-PLUS | PNEUMATIC POWER RIVET TOOL 3/32 TO 3/16 | 1 | |
| PRG510A-PLUS PRG | PNEUMATIC POP RIVET | 1 | |
| PRG540 | PNEUMATIC TUBULAR RIVET GUN | 3 | |
| PROBE GUIDE S41-G1A | BOEING PROBE GUIDE. MATERIAL: POLYETHYLENE or EQUIVALENT. | 1 | |
| PROBE GUIDE S41-G1B | BOEING PROBE GUIDE. MATERIAL: POLYETHYLENE or EQUIVALENT. | 1 | |
| PROBE GUIDE S43-G1A,G1B, G1C | BOEING PROBE GUIDE. MATERIAL: POLYETHYLENE or EQUIVALENT. | 1 | |
| PS-166 | PNEUMATIC ROLLER | 1 | |
| PS-526 | KETT Pneumatic Panel Saw | 1 | |
| PS-PDP60 | POWER DISTRIBUTION PANEL, 60KW, 3 PHASE CIRCUIT BREAKER MUST BE THE MILITARY SPEC ONE MATCHED WITH NSN ATTACHED. | 1 | |
| PS2-201 | WHEELPANT COVERS (specify material type) (set of 2) | 1 | |
| PSD3050-3-TM | PSD3050-3-TM;Time and Material Repair - PSD3050-3 | 1 | |
| PSD40-502-3-TM | PSD40-502-3-TM;Time and Material Repair - PSD40-502-3 | 1 | |
| PSD501-2-TM | PSD501-2-TM;Time and Material Repair - PSD40-501-2 | 1 | |
| PSD502-TM | PSD502-TM;Time and Material Repair - PSD40-502 | 1 | |
| PSD60-107-TM | PSD60-107-TM;Time and Material Repair - PSD60-107 | 1 | |
| PSD60-113-TM | PSD60-113-TM;Time and Material Repair - PSD60-113 | 1 | |
| PSD60-5034-TM | PSD60-5034-TM;Time and Material Repair - PSD60-503 4 | 1 | |
| PSD60-510/511-TM | PSD60-510/511-TM;Time and Material Repair - PSD60-510/511 | 1 | |
| PSF4612VH | 6" ORBITAL PNEUMATIC SANDER | 1 | |
| PSOF4625V | 6" ORBITAL PNEUMATIC SANDER | 1 | |
| PSP 396 | BOMBARDIER CALIBRATION STANDARD, CL-215T PART 6 FIGURE 5 PAGE 8. A TOTAL OF 15 HOLE SIZES: 4mm THRU 18mm MATERIAL: 2024T3 ALUMINUM. Includes Certification Report Traceable to NIST and Certificate of Conformance. | 1 | |
| PST686H113 | 1-13/16 PNEUMATIC SPINTORQ | 1 | |
| PT-100 | RIVETER BLIND, PNEUMATIC | 2 | |
| PT-100-1 | PNEUMATIC-HYDRAULIC BLIND RIVERTER | 1 | |
| PT-OSAM01 | OIL SPILL ABSORBENT MAT 41X51CM HEAVY WEIGHT | 1 | |
| PT850 | WRENCH, IMPACT, PNEUMATIC, 1/2IN DRIVE, 810 FT-LB, 9200 RPM | 1 | |
| PTG8BDL | MODEL PTG8 ULTRASONIC PRECISION MATERIAL THICKNESS GAUGE | 1 | |
| PTR72 | WRENCH,RATCHET,PNEUMATIC | 1 | |
| PTR778 | SNAP-ON ANGLE PNEUMATIC RATCHET | 1 | |
| PTS-72-2000 | TORQUE DEVICE PNEUMATIC MULTIPLIER | 1 | |
| PTS722000 | TORQUE DEVICE PNEUMATIC MULTIPLIER | 1 | |
| PVN2-3117-00A | VALVUE PNEUMATICA | 1 | |
| PWA 100012 | BENDER CHANGE LETTER A, PNEUMATIC (PREPEND) (WITH PWA 102146, OPTIONAL TO PWA | 1 | |
| PWA 100013 | BENDER, PNEUMATIC | 1 | |
| PWA 100014 | BENDER CHANGE LETTER A, PNEUMATIC (INITIAL BEND) (REPLACES PWA 78013 AND OPTIONS | 1 | |
| PWA 100096 | BENDER, PNEUMATIC (FINAL BEND) | 1 | |
| PWA 100204 | BENDER, PNEUMATIC (INITIAL BEND, OPTIONAL TO PWA 102082 CRIMPER) | 1 | |
| PWA 100206 | BENDER, PNEUMATIC (FINAL BEND OPTIONAL TO PWA 102082 CRIMPER) | 1 | |
| PWA 100518 | BENDER, PNEUMATIC (INITIAL BEND, OPTIONAL TO PWA 104726) | 1 | |
| PWA 100519 | BENDER, PNEUMATIC (FINAL BEND, OPTIONAL TO PWA 104727) | 1 | |
| PWA 100520 | BENDER, PNEUMATIC (INITIAL BEND, OPTIONAL TO PWA 100204) | 1 | |
| PWA 100521 | BENDER, PNEUMATIC (FINAL BEND, OPTIONAL TO PWA 100206) | 1 | |
| PWA 102146 | BENDER, PNEUMATIC (FINAL BEND) (WITH PWA 100012 CHANGE LETTER A, OPTIONAL TO PWA 78012) | 1 | |
| PWA 102171 | BENDER, PNEUMATIC (FINAL BEND) | 1 | |
| PWA 104726 | BENDER, PNEUMATIC (INITIAL BEND, OPTIONAL TO PWA 102081 CRIMPER) | 1 | |
| PWA 104727 | BENDER, PNEUMATIC (FINAL BEND, OPTIONAL TO PWA 102081 CRIMPER) | 1 | |
| PWA 106226 | BENDER, PNEUMATIC - HPC, 7TH AND 8TH STAGE BLADE LOCK (INITIAL BEND) | 1 | |
| PWA 106293 | BENDER, PNEUMATIC - HPC, 6TH STAGE BLADE LOCK (INITIAL BEND) | 1 | |
| PWA 45419 | MULTIPLIER, PNEUMATIC* (USE WITH MECHANICAL WRENCH) | 1 | |
| PWA 78012 | BENDER, PNEUMATIC (OPTIONAL TO PWA 100012 CHANGE LETTER A AND PWA 102146) | 1 | |
| PWA 78013 | BENDER, PNEUMATIC (OPTIONAL TO PWA 100013) (REPLACED BY PWA 100014 CHANGE LETTER A) | 1 | |
| PWA 78014 | BENDER, PNEUMATIC (REPLACED BY PWA 100013 CHANGE LETTER B) | 1 | |
| PWA 80651 | MULTIPLIER, PNEUMATIC | 2 | |
| PWA100012 | BENDER, PNEUMATIC (PREBEND, STAGE 5 BLADE LOCKS) (CHANGE LETTER A) | 1 | |
| PWA100013 | BENDER, PNEUMATIC, CHANGE LETTER B (INITIAL BEND, STAGES 7 AND 8 BLADE LOCKS), (REPLACED BY PWA 106226) | 1 | |
| PWA100014 | BENDER, PNEUMATIC (INITIAL BEND, 6TH STAGE BLADE LOCKS) (REPLACES PWA 78013 AND OPTIONS) | 1 | |
| PWA100096 | BENDER, PNEUMATIC (FINAL BEND, 6TH STAGE BLADE LOCKS) | 1 | |
| PWA100204 | BENDER, PNEUMATIC (INITIAL BEND, OPTIONAL TO PWA 102082 CRIMPER) | 1 | |
| PWA101158 | BENDER PNEUMATIC HPC | 1 | |
| PWA101173 | BENDER PNEUMATIC LPC 4TH STAGE BLADE LOCK (FINAL BLEND) | 1 | |
| PWA101174 | BENDER PNEUMATIC LPC 4TH STAGE BLADE LOCK (FINAL BLEND) | 1 | |
| PWA101180 | BENDER PNEUMATIC LPC 4TH STAGE BLADE LOCK (PREBEND) | 1 | |
| PWA102146 | BENDER, PNEUMATIC (FINAL BEND, 6TH STAGE BLADE LOCKS) (REPLACES PWA 78012) | 1 | |
| PWA102171 | BENDER, PNEUMATIC (FINAL BEND, STAGES 7 AND 8 BLADE LOCKS) (REPALCES PWA 78014) | 1 | |
| PWA102530 | BENDER PNEUMATIC HPC | 1 | |
| PWA102532 | BENDER PNEUMATIC | 1 | |
| PWA102533 | BENDER PNEUMATIC LPT | 1 | |
| PWA102549 | BENDER PNEUMATIC LPT | 1 | |
| PWA102555 | BENDER PNEUMATIC HPC | 1 | |
| PWA102572 | BENDER PNEUMATIC HPC | 1 | |
| PWA106226 | BENDER, PNEUMATIC (INITIAL BEND, STAGES 7 AND 8 BLADE LOCKS) (REPLACES PWA 100013) | 1 | |
| PWA107812 | TEST HOSE - PNEUMATIC, IDG/AOC OVERRIDE PRESSURE SWITCH | 1 | |
| PWA211777 | "TESTER, GAGE - MATING RING FOR HYDRAULIC PUMPMAIN | 3 | |
| PWA211778 | TESTER, GAGE - MATING RING FOR FUEL PUMPMAIN GEARBOX | 3 | |
| PWA211794 | RIVETER, PNEUMATIC - HPC MODULE , BALANCE FLG. | 1 | |
| PWA211861 | ADAPTER, INSTALL/REMOVAL-HPT , ROTAR MATING RING | 2 | |
| PWA29156 | GAGE - GROOVE DEPTH, FAN CASE RUBSTRIP PROTECTIVE MAT - RUBBER, MANUFACTURERS ASSOCIATION, GRADE SC43, NEOPRENE SPONGE, 1 INCH THICK, APPROXIMATELY 3 X 4 FEET WITH WARNING STREAMER ATTACHED | 8 | |
| PWA29316-7 | BENDER PNEUMATIC HPC | 1 | |
| PWA29919 | BENDER PNEUMATIC LPC | 1 | |
| PWA29952 | BENDER PNEUMATIC LPC | 2 | |
| PWA29956 | BENDER PNEUMATIC LPC | 2 | |
| PWA33943 | BENDER PNEUMATIC LPC | 1 | |
| PWA45419 | MULTIPLIER PNEUMATIC-PNEUMATIC POWER UNIT (SWEENEY) | 1 | |
| PWA45419 REV A | AIR TORQUE MULTIPLIER - PNEUMATIC POWER UNIT | 1 | |
| PWA49030 | HYDRAULIC CART (PNEUMATIC) (OPTIONAL TO CTE 5100) | 1 | |
| PWA56319 | RIVETER,JAM,PNEUMAT | 1 | |
| PWA57799 | FIXTURE, PNEUMATIC S | 1 | |
| PWA70473 | AUTOMATED SHOT PEENING MASK | 1 | |
| PWA70477 | AUTOMATED SHOT PEENING PLATE, ADAPTER | 1 | |
| PWA70479 | AUTOMATED SHOT PEENING FIXTURE, TEST | 1 | |
| PWA75213-2 | FOOT CONTROLLED PNEUMATIC DRIVER-BORESCOPE INSPECT | 1 | |
| PWA78012 | BENDER, PNEUMATIC (STAGE 5 BLADE LOCKS) (REPLACED BY PWA 100012 CHANGE LETTER A, AND PWA 102146) | 1 | |
| PWA78013 | BENDER, PNEUMATIC (STAGE 6 BLADE LOCKS) (REPLACED BY PWA 100014 AND PWA PWA 100096) | 1 | |
| PWA78014 | BENDER, PNEUMATIC (STAGE 7 AND 8 BLADE LOCKS) (REPLACED BY PWA 100013 AND PWA 102171) | 1 | |
| PWA80651 | MULTIPLIER-PNEUMATIC,SWEENEY MECHANICAL WRENCHES | 2 | |
| PWA80817-2B | Pneumatic Turnover Tool | 1 | |
| PWA83115 | BENDER, PNEUMATIC | 1 | |
| PWA85572 | ROTOR-PNEUMATIC BORESCOPE | 1 | |
| PWA85572-1 | ROTATOR-PNEUMATIC FOOT OPERATED | 1 | |
| PWA85572-2 | ROTATOR-PNEUMATIC HAND OPERATED | 1 | |
| PWA85680 | BENDER PNEUMATIC LPC | 1 | |
| PWA85681 | BENDER PNEUMATIC LPC | 1 | |
| PWA85682 | BENDER PNEUMATIC LPC | 2 | |
| PWA85685 | BENDER PNEUMATIC LPC | 3 | |
| PWA85688 | BENDER PNEUMATIC LPT | 11 | |
| PWA88586 | PNEUMATIC LIFT | 1 | |
| PWC24 | AUTOMATIC WIRE STRIPPER | 2 | |
| PWC27 | WIRE STRIPPER, STRIPMAST, AUTOMATIC | 4 | |
| PWC27-7 | AUTOMATIC WIRE STRIPPERS | 2 | |
| PWC37918 | GRINDER,PNEUMATIC,HORIZONTAL | 8 | |
| PWC42 | WIRE STRIPPER, STRIPMASTER LITE, AUTOMATIC, 16-22 AWG, 5 1/2IN | 2 | |
| PWC50041 | FIXTURE, PNEUMATIC SYSTEMS COMPONENT | 4 | |
| PXS LDS 10 | PMAT 2000 KIT, BOEING EFB WITH 615A | 5 | |
| PXS--LDS-10 | PMAT XS | 5 | |
| PXS-LDS-10 | PMAT XS KIT LOADER KIT | 5 | |
| PXS-LDS10 | PMAT 2000 KIT | 5 | |
| PXSLDS10 | PMAT XS | 5 | |
| PXSLDS10-KIT | PMAT-2000 | 1 | |
| PXS‐LDS‐10 | PMAT 2000 KIT, BOEING EFB WITH 615A | 5 | |
| PZT-15MHz | .25" Dia. 15MHz K-81 MATERIAL PIEZOELECTRIC ELEMENT | 1 | |
| Pneumatic Motor Pistol | Pneumatic Motor Pistol | 1 | |
| Pneumatic Motor Straight | Pneumatic Motor Straight | 1 | |
| QA109600 | HBC RADIOMATIC BATTERY CHARGER TYPE: STAHL MODEL | 1 | |
| QA8AALD225NF56S12 | PNEUMATIC ANGLE NUT RUNNER, 225NM (166 FT-LB) | 1 | |
| QO-QTS-TI-03-001 | Air Force reference standard Detail#1. Material 7075-T6 Aluminum. EDM Notch size: .050" x .050" x .005" Max Width, 10 Flaws total. Includes Test Report and Certificate of Conformance. | 1 | |
| R0001414 | PNEUMATIC DUCT BURNOUT | 1 | |
| R72G-2GK-RMN | NORGREN G 1/4 PNEUMATIC REGULATOR | 1 | |
| RA-DSA-1854-PN-0 | Pneumatics Installation | 1 | |
| RB211-524 | D4 & G2 engine stand with pneumatic tires flightli | 1 | |
| RB23033027 | Puller-Bearing & Mating Seal Race-Frt Compressor | 2 | |
| RBE03-8600 | TWO/ONE WAYS PNEUMATIC 2EA | 1 | |
| RBW6305G25131-3G | TOOL KIT, INPUT PINION MATING RING REPLACEMENT | 2 | |
| RCS06-1806 | ADAPTOR-PNEUMATIC | 1 | |
| RD-FA6013-45 | PNEUMATIC TEST KIT FITTINGS B737CL | 3 | |
| RD-S-NAV | PNEUMATIC HAND TOOL | 1 | |
| RDS001 | DESEALING TOOL,PNEUMATIC | 5 | |
| RDS1001 | PNEUMATIC SCRAPER | 1 | |
| RG3-505 | WHEELPANT COVERS (specify material type) (set of 3) | 1 | |
| RH550 | HODROPNEUMATIC RIVETER | 1 | |
| RIDGID TC-40 | CUTTER, POWER, MULTILAYER PLASTIC PIPE CUTTER, MATL STEEL BLADE, PLASTIC HOUSING, CAP 40 MM OD (MULTI LAYER), 42 MM OD (SNGLE LAYER), 2.5 MM WALL THK, RATING 100 - 240 VAC, 190 MA, 50/60 HZ, 12 V RECHARGEABLE LI-ION BATTERY | 1 | |
| RIVET-GUN | PNEUMATIC RIVET GUN TOOL | 1 | |
| RIVET-MILLER | PNEUMATIC RIVET MILLER TOOL | 1 | |
| ROLLS | STANDARDS MATERIAL FOR BORESCOPE | 1 | |
| ROLLS ROYCE | STANDARDS MATERIAL FOR BORESCOPE | 1 | |
| ROLLSROYCE | STANDARDSMATERIALFORBOROSCOPY | 1 | |
| ROS20VSC | PNEUMATIC SANDER 5 | 1 | |
| RR289200 | WORKMAT, PROTECTIVE | 1 | |
| RR289200/WTS | MAT PROTECTION INLET COWL CEO | 1 | |
| RRH 08P | PNEUMATIC RIVETING HAMMER | 1 | |
| RRN11P-02 | PNEUMATIC RIVET GUN 10.2MM | 1 | |
| RRT054314 | PROTECTIVE RUBBER MAT FWD | 1 | |
| RRT054314-1 | PROTECTIVE RUBBER MAT FWD | 2 | |
| RRT054315 | REAR FANCASE PROTECTION MAT | 1 | |
| RRT074288 | MAT- Protective | 4 | |
| RRT096195-1 | MATS PROTECTIVE MATS | 1 | |
| RRT100610 | PROTECT MAT - PROTECTION | 1 | |
| RRT100610-2 | MAT - PROTECTION | 1 | |
| RRT101115 | PROTECTIVE MATS | 2 | |
| RRT101115-2 | MAT-PROTECT REAR FANCASE ACOUSTIC PANELS | 2 | |
| RRT115166 | WATER TARY AND SPLASH GUARD WITH TWO NON-SLIP MATS | 1 | |
| RS0824-2024T3 | EDDY CURRENT SURFACE REFERENCE STANDARD, EDM NOTCHES .008", .020", .040" (.004W +/- .002), MATERIAL: 2024-T3 ALUMINUM. SIZE: 4.0"L X 1.0"W X .25". INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| RS500P-18500-UNF | PISTOL GRIP RIVET SHAVER (CHICAGO PNEUMATIC) | 1 | |
| RSB 150/1 NX | NUMATIC BACK PACK CORDLESS VACUUM CLEANER | 1 | |
| RSB140 | NUMATIC VACUUM CLEANER, BACK PACK, CORDLESS | 1 | |
| RSE7103 | MAT, INLET COWL PROTECTIVE | 1 | |
| RSE7103 REV NC | MAT, INLET COWL PROTECTIVE | 1 | |
| RSE7205 | MAT, LOWER FAN COWL PROTECTIVE | 1 | |
| RSE7205 REV NC | MAT, LOWER FAN COWL PROTECTIVE | 1 | |
| RSE7206 | MAT PROTECT COWL FAN | 1 | |
| RSN-304SS | CUSTOM NAVY BLOCK. MATERIAL: 304 STAINLESS STEEL ,CONTAINING 20 FASTENER HOLES (.156-.750) WITH A TOTAL OF 71 EDM NOTCHES NOTCHES. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| RT5-19MM-1018-.5/2.5MM | THIN MATERIAL 5 STEP WEDGE 1018 STEEL | 1 | |
| RT5-20MM-7075T6-5/25MM | METRIC 5 STEP WEDGE, 5MM, 10MM, 15MM, 20MM, 25MM, +/- .05MM. MATERIAL: 7075-T6 ALUMINUM. PAD SIZE: 20MM X 20MM SQUARE. | 1 | |
| RT5-25MM-7075T6-10/30MM | 5 STEP BLOCK -2 UNIT - AL BLOCK CONSIST OF 5 DIFFERENT THICKNESS (30MM, 25MM, 20MM, 15MM, 10MM) AS BELOW. - MATERIAL AL 2024 | 1 | |
| RT8-20MM-7075T6-1/25MM | 8 STEP WEDGE, 1MM (.0394), 3MM (.1181), 5MM (.1968), 8MM (.3149), 10MM (.3937), 15MM (.5905), 20MM (.7874), 25MM (.9842) +/- .01MM. MATERIAL: 7075-T6 ALUMINUM. MATERIAL THICKNESS: .984, STEPS: .984X.984, LENGTH: 7.874 | 1 | |
| RT8-25MM-2024T3-1/8MM | 8 STEP BLOCK - 2 UNIT - AL BLOCK CONSIST OF 8 DIFFERENT THICKNESS (1MM, 2MM, 3MM, 4MM, 5MM, 6MM, 7MM, 8MM)AS BELOW. - MATERIAL AL2024 | 1 | |
| RTC1200 | PNEUMATIC SQUEEZER LARGE | 1 | |
| RV15 | RIVETER,BLIND,PNEUMATIC | 1 | |
| RV30GD | PNEUMATIC BLIND RIVETER | 1 | |
| RV4-130 | WHEELPANT COVERS (specify material type) (set of 2) | 1 | |
| RV6-510 | WHEELPANT COVERS (for tricycle) (specify material type) (set of 3) | 1 | |
| RVM07B | PNEUMATIC SCRAPER | 2 | |
| RYLB-52192-4 | 2.25 PNEUMATIC VALVE | 1 | |
| Rolls Royce | STANDARDS material for boroscopy | 1 | |
| S0143 | Fokker 50/60 Reference Standard PART 6 53-30-03 PAGE 9. Material: 2024-T3 Alclad Aluminum. | 1 | |
| S108-505 | TIRE COVERS (no wheelpant faring) (specify material type) (set of 2) | 1 | |
| S108-507 | MAIN GEAR WHEELPANT COVERS (specify material type) (set of 2) | 1 | |
| S125-1 | (S125-1 (HYPERTAC DEFORMATION TOOL) | 1 | |
| S3121 | S3121;Mating Sleeve for LC LC Plug | 1 | |
| S3124 | S3124;Mating Sleeve for SC-APC/SC-APC Plug Simplex Green | 1 | |
| S3125 | S3125;Mating Sleeve for LC-APC/LC-APC Plug Duplex Green | 1 | |
| S46-C2 | BOEING REFERENCE STANDARD S42-C6 FIGURE 2. MATERIAL: 2024-T3 CLAD. RIVET: BACR15CE6. Includes Test Report and Certificate of Conformance | 1 | |
| S46-G1A/G2A | BOEING REFERENCE STANDARD FIGURE 2. MATERIAL: 2024-T3 ALUMINUM. FASTENERS: BACR15CE6D 2 PLACES. Includes Certification Report. | 1 | |
| S520 BLOCK | British Aerospace test block. Material: mild steel 4130, 4140 or 4340 cres .128: thick. Includes Test Report and Certificate of Conformance. | 1 | |
| S540MTD | JO-BOLT PNEUMATIC PISTIL DRIVER | 4 | |
| S57-10-105.2/1 | BAE 146-RJ SERIES REFERENCE STANDARD 57-10-58 PT 6 FIGURE 7-9 PAGES 13-15. Material: 2024-T3 Includes Test Report and Certificate of Conformance. | 1 | |
| S57-10-105.2/2 | BAE 146-RJ SERIES REFERENCE STANDARD 57-10-58 PT 6 FIGURE 7-9 PAGES 13-15. Material: 2024-T3 Includes Test Report and Certificate of Conformance. | 1 | |
| S76-612 | PITOT-STATIC ADAPTER KIT, PNEUMATIC BOOST PUMP | 3 | |
| SAAB 5341-151-01I | REFERENCE STANDARD SAAB 340 FIG.1 5341-151-01I PART 4 PAGE 5. MATERIAL: 4140 CRES STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| SAAB 5512-332-03I | SAAB 340 REFERENCE STANDARD 5512-332-03I FIGURE 1 PAGE 2, 55-10-00 PART 6 PAGE 3. MATERIAL: 2024-T351 ALUMINUM WITH 4 HL10 VAP-6-7 HI-LOK FASTENERS.. Includes Test Reprort and Certificate of Conformance. | 1 | |
| SAC-1945-04-09 | PNEUMATIC TEST KIT 737 NG | 1 | |
| SANWA CD772 | MULTIMETER DIGITAL KOMPAK PRESISI TINGGI RENTANG OTOMATIS MULTIFUNGSI | 1 | |
| SB 146/53-167/2 | BAE 146-RJ SERIES REFERENCE STANDARD ISB.53-167 APPENDIX 2 DRAWING 15, PAGE 23&24. Material: Substitute 2024-T3 Clad for 2014A-T4 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| SB 57-3329 FIG.9 | Raytheon 12 Hole Standard Calibration Block Figure 9 Page 20, Service Bulletin SB 57-3329. Hole sizes 9/64, 11/64,3/16 and 13/64. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| SB05-745C-23 | PNEUMATIC BLIND RIVETER | 1 | |
| SB09540030-5 | DC9 SURFACE REFERENCE REFERENCE STANDARD DC9-54-030. MATERIAL: 17-7 PH STAINLESS STEEL. EDM NOTCH: 0.002"-0.010" WIDE x 0.030" DEEP. | 1 | |
| SB09550023-17 | Douglas Reference Standard Assembly 55-23 Figure1 sheets 1-5, Pages 31-35. Material: 2024-T3 Aluminum. Includes Test Report Traceable to NIST and Certificate of Conformance. | 2 | |
| SB10270203-5 | Douglas Reference Standard Inboard Slat Drive Arm. Bulletin A27-203. Figure1 sheet 11, Pages 31-35. Material: HY-TUF or 4000 Series Steel CAD Plated. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| SB10550016-147 | DC-10 SERVICE BULLETIN REFERENCE STANDARD FIGURE 1 PAGE 14, SHEET 1. MATERIAL: 7075-T6 ALUMNIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| SBE1682 | PNEUMATIC CONNECTION UNIT | 1 | |
| SBE2117A | PNEUMATIC ADAPTOR 9/16" 2EA | 1 | |
| SBE2119 | 3/8" PNEUMATIC ADAPTOR | 1 | |
| SBE2155-A01 | TOOL-TEST-KIT, PNEUMATIC BLEED SYS | 1 | |
| SC-100TK | SCORPION PNEUMATIC HEPA SANDING VAC KIT | 1 | |
| SCA-1945-04-09 | KIT PNEUMATIC TEST | 1 | |
| SCA-7024 | PNEUMATIC ENGINE OIL DISPENSER (IDG MODEL SCA-7024IDG, HYDRAULIC MODEL SCA-7024HYD) | 1 | |
| SCHB-V1.0 | Portable Automatic Brinell Hardness Tester | 1 | |
| SCP043-T1100-S4Q | Chicago Pneumatic Screwdrivers (Rpm (no load): 1100) (Torque range: 3.5 to 38 in-lbs) (Overall length: 9" (229 mm)) (Add to cart: Add To Cart) | 1 | |
| SCT32084 | Spanner Tool for adjusting Hand & Pneumatic Safe-T-Cable Application Tools | 2 | |
| SCTP203 | Preset Pneumatic Safe-T-Cable Application Tool with 3 Inch Nose for .022" Safe-T-Cable | 2 | |
| SCTP207 | Preset Pneumatic Safe-T-Cable Application Tool with 7 Inch Nose for .022" Safe-T-Cable | 2 | |
| SCTP323 | Preset Pneumatic Safe-T-Cable Application Tool with 3 Inch Nose for .032" Safe-T-Cable | 2 | |
| SCTP327 | Preset Pneumatic Safe-T-Cable Application Tool with 7 Inch Nose for .032" Safe-T-Cable | 2 | |
| SCTP403 | Preset Pneumatic Safe-T-Cable Application Tool with 3 Inch Nose for .040" Safe-T-Cable | 2 | |
| SCTP407 | Preset Pneumatic Safe-T-Cable Application Tool with 7 Inch Nose for .040" Safe-T-Cable | 2 | |
| SCTPR323 | Adjustable Tension, Pneumatic Safe-T-Cable Application Tool with 3 Inch Nose for .032" Safe-T-Cable | 1 | |
| SCTPRM-TW-SA | Replacement Tension Wheel Sub-Assembly for the SCTPRM Pneumatic Tools | 1 | |
| SCTPRM203 | Adjustable Tension Pneumatic Safe-T-Cable Tool with 3" Nose for for .022" Safe-T-Cable | 2 | |
| SCTPRM207 | Adjustable Tension Pneumatic Safe-T-Cable Tool with 7" Nose for for .022" Safe-T-Cable | 2 | |
| SCTPRM323 | Adjustable Tension Pneumatic Safe-T-Cable Tool with 3" Nose for for .032" Safe-T-Cable | 2 | |
| SCTPRM327 | Adjustable Tension Pneumatic Safe-T-Cable Tool with 7" Nose for for .032" Safe-T-Cable | 2 | |
| SCTPRM403 | Adjustable Tension Pneumatic Safe-T-Cable Tool with 3" Nose for for .040" Safe-T-Cable | 2 | |
| SCTPRM407 | Adjustable Tension Pneumatic Safe-T-Cable Tool with 7" Nose for for .040" Safe-T-Cable | 2 | |
| SDR10A3R4 | DRILL SS AH 1 ANGLE PNEUMATIC | 1 | |
| SDR10P60N2 | PNEUMATIC DRILL (BROWN TOOL) | 3 | |
| SDR10P7R4 | SNAP-ON PNEUMATIC DRILL | 1 | |
| SDR4P60N2 | PNEUMATIC DRILL GUN | 3 | |
| SE9371 | PUMP-SET,HYDRAULIC/PNEUMATIC | 1 | |
| SEMCO 250-A | PPG® SEMCO® 250000 MODEL 250-A (NO RETAINER) PNEUMATIC SEALANT GUN W/ HANDLE (LESS HOSE) | 2 | |
| SEMCO N°250125 | PISTOLA SELLANTE NEUMATICA 12 ONZ | 1 | |
| SEMCO/250-R | PNEUMATIC SEALANT APPLICATOR | 1 | |
| SEMCO250A-GUN | PPG® SEMCO® 250000 MODEL 250-A (NO RETAINER) PNEUMATIC SEALANT GUN W/ HANDLE | 1 | |
| SEMCO550-20 | PNEUMATIC GUN | 1 | |
| SERV-SUP | REQUIRED ANNUAL SUPPORT FEE FOR PMAT XS® KIT P/N PXS-LDS-10 | 1 | |
| SERV-SUP-PMAT | REQUIRED ANNUAL SUPPORT FEE FOR PMAT XS® KIT P/N PXS-LDS-10 | 2 | |
| SERV-SUP-PMAT XS | SERV-SUP-PMAT-XS 1 YEAR ANNUAL SUPPORT REQ'D | 2 | |
| SERV-SUP-PMAT-XS | TELEDYNE CONTROLS SERV-SUP-PMAT-XS 2 YEAR ANNUAL SUPPORT REQ'D | 2 | |
| SFD-321 | PMAT 2000 - FLOPPY DISK USB DRIVE | 1 | |
| SI FANG | PNEUMATIC VIBRO ENGRAVING PEN | 1 | |
| SIOUX-5440 | PNEUMATIC DRILL | 1 | |
| SK601R-30008A | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERED FASTENED ASSEMBLY, EQUIVALENT IN MATERIAL AND THICKNESS AS THE INSPECTION AREA CONTAINING SUBSURFACE ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ). | 6 | |
| SKINPIN-GUN | PNEUMATIC SKINPIN GUN TOOL | 1 | |
| SKIT001 | OIL SAMPLING KIT (OMAT 2/235) | 1 | |
| SKRR5317-R | TOP MAT - KRA5318 | 1 | |
| SKU-68223 | CENTRAL PNEUMATIC 150 PSI AIR COMPRESSOR REGULATOR KIT WITH DIAL GAUGE | 1 | |
| SL5-130 | WHEELPANTS COVERS (specify material type) (set of 2) | 1 | |
| SLA-20 | MATERIAL LIFT,MANUALY OPERATED,UP TO 800LB(363KG | 1 | |
| SLA10 | GENIE MATERIAL SUPERLIFT AVAILABLE | 2 | |
| SLS-123456-SS304 | BOEING REFERENCE STANDARD PER DRAWING STD-1. MATERIAL: 304 STAINLESS STEEL. CHEMICAL CONVERSION COATING PER MIL-DTL-5541, CLASS 1A. Includes Certification Traceable to NIST and Material Certs. | 1 | |
| SM201-6 | PMAT BATTERY | 1 | |
| SN10550000 | BOEING REFERENCE STANDARD SHEETS 1-4. DETAIL -3,-5,-7. MATERIAL: 7075-T7 & 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| SNAP ON BRAND | PNEUMATIC GREASE GUN (14 OZ) | 1 | |
| SNH10S18 | Sioux® Pneumatic Nibbler (Capacity (mild / stainless): 18 Gauge) (Overall length: 8-1/2") (Add to cart: Add To Cart) | 1 | |
| SO111-7 | Custom FOKKER F28 Horizontal Stab. Drive Junction Fitting Eddy Current Standard per drawing # 28. 0-3210/2610-Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| SP-110 BMC | VINY ZEPPER PNEUMATIC SET | 1 | |
| SP-265 | LOCKHEED C-130 STEP BLOCK. PROCEEDURE SMP 515-C. PAGE 9 MATERIAL: 7075-T6 ALUMINUM. | 1 | |
| SPL-10943 | PROTECTIVE MAT | 1 | |
| SPL-13770 | ENGINE PNEUMATIC TEST KIT | 1 | |
| SPL-14774 | ADAPTER - VSV PNEUMATIC | 1 | |
| SPP1000 | PNEUMATIC SRAY GUN, DINITROL APPLICATOR | 1 | |
| SPRAY MATIC 10S | SPRAY MATIC 10S | 1 | |
| SR20-160 | FRONT WHEELPANT/STRUT COVER (specify material type) | 1 | |
| SR20-165 | MAIN GEAR WHEELPANT COVERS (specify material type) (set of 2) | 1 | |
| SR22-170 | FRONT WHEELPANT/STRUT COVER (specify material type) | 1 | |
| SR22-172 | MAIN GEAR WHEELPANT COVERS (specify material type) (set of 2) | 1 | |
| SR22-850 | FRONT WHEELPANT/STRUT COVER, Light Weight (specify material type) | 1 | |
| SS TYPE 301 | BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-70-001. ALSO IN 53-10-01 PART 6 PAGE 5 FIGURE 1. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL: 301 STAINLESS . SIZE: 1.5"W x 3.75"L x .25" | 2 | |
| SS TYPE 304 | BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-70-001. ALSO IN 53-10-01 PART 6 PAGE 5 FIGURE 1. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL: 304 STAINLESS STEEL. SIZE: 1.5"W x 3.75"L x .25" | 1 | |
| SSD10P7AC | PNEUMATIC SCREW DRIVER | 3 | |
| SSH10P18 | SIOUX Signature Series Pneumatic Metal Shears | 3 | |
| SSR6P25 | RODCRAFT PNEUMATIC | 3 | |
| SST2-3KUK-CEL | Bojo Tools SST2-3KUK-CEL 3-Piece Red Celcon Material Sealant Smoothing Tool Kit | 1 | |
| ST2580-153 | WRENCH PNEUMATIC SYSTEM BALL JOINT OUTER BEARING N | 3 | |
| ST2580-163 | KIT WRENCH PINEUMATIC | 1 | |
| ST2580-163-1 | PNEUMATIC SYS BALL JOINT RET. WRENCH SET | 6 | |
| ST2580-163-2 | PNEUMATIC SYS. BALL JOINT RET. WRENCH | 4 | |
| ST2580-163-3 | PNEUMATIC SYS. BALL JOINT RET. WRENCH | 6 | |
| ST4130 | BOMBARDIER / CANADAIR EDDY CURRENT SURFACE REFERENCE STANDARD PART 6 55-20-001, NOTCHES .008", .020", .040" (.005" Wide +000 / - .002 and +/- .001" Depth), MATERIAL: 4130 STEEL. Includes certification Report and Certificate of Conformance(COC)... | 1 | |
| ST4330 | BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-70-001. ALSO IN 53-10-01 PART 6 PAGE 5 FIGURE 1. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL: 4330 or 4340 STEEL. SIZE: 1.5"W x 3.75"L x .25". Includes certification Rep | 1 | |
| ST4340 | BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-70-001. ALSO IN 53-10-01 PART 6 PAGE 5 FIGURE 1. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL: 4340 STEEL. SIZE: 1.5"W x 3.75"L x .25". Includes certification Report ... | 5 | |
| ST617-6325-001 | MOTOR ARMATURE PULLER TOOL ASSEMBLY | 1 | |
| ST732-250 | CUTTER - SCOTCHCAL MARKING MATERIAL (THE BOEING COMPANY) | 1 | |
| ST8770S | SPL-6313 GAUGE - MISMATCH | 3 | |
| ST8870-1 | BLOQUE ESTÁNDAR PARA INSPECCIÓN DE MATERIALES COMPUESTOS | 4 | |
| ST8870-7 | COMPOSIT MATERIAL INSPECTION BLOCK | 4 | |
| ST8870-8 | COMPOSIT MATERIAL INSPECTION BLOCK | 5 | |
| ST8870B-7 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATE. MATERIAL: BMS8-79 FIBERGLASS( 1-10 PLY), PT 1 51-04-00, PAGE 27 FIGURE 8. B737 NDT Part 1, 51-04-00. Includes C-Scan, Certification Report and Certificate of Conformance. | 3 | |
| ST8870B-8 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATE. MATERIAL: BMS8-79 FIBERGLASS( 11-20 PLY), PT 1 51-04-00, PAGE 27 FIGURE 8. B737 NDT Part 1, 51-04-00. Includes C-Scan, Certification Report and Certificate of Conformance. | 3 | |
| ST8870B-9 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATE. MATERIAL: BMS8-79 FIBERGLASS( 21-30 PLY), PT 1 51-04-00, PAGE 27 FIGURE 8. B737 NDT Part 1, 51-04-00. Includes C-Scan, Certification Report and Certificate of Conformance. | 3 | |
| ST8871 | COMPOSITE 10 STEP WEDGE SOLID LAMINATE, 777 PT 4 51-00-06 PAGE 7 FIGURE 1. BMS 8-276 FABRIC MATERIAL TYPE 35 CL3 GRADE190. STEP SIZES: .050, .100, .200, .300, .400, .500, .600, .700, .800, .900. | 4 | |
| ST902R | TOOL REFORM FLANGE COUPLING B737 PNEUMATIC DUCTS | 7 | |
| STANDARD-B | 2/64" FLAT BOTTOM HOLE EQUIVALENT SURFACE NOTCH STANDARD (*ABOVE DESCRIPTION MUST BE ENGRAVED ON THE REFERENCE STANDARD) ..DRAWING "B" (PS21211.3 FOR F/A-18 OUTER WING FORWARD SPAR) MATERIAL=7075-T6 | 1 | |
| STD-00107021 | Avcon Industries LFEC Calibration Reference Standard. BNC Document: 00107021, Rev. B Figure 7 Page 22. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| STD-0393 | PROTECTIVE MAT, INLET | 1 | |
| STD-1--AL | Custom Radius Channel Standard Material: 7075-T651 ALUMINUM. Standard to include a total of 62 EDM flaws identified as A, B,C, D, E, and F in the drawing. Includes test report traceable to NIST standards which comply with MIL-Q-9858A, Mil-4-45208A. | 1 | |
| STD-1-TI | Custom Radius Channel Standard Material: 6AL-4V Titanium. Standard to include a total of 62 EDM flaws identified as A, B,C, D, E, and F in the drawing. Includes test report traceable to NIST standards which comply with MIL-Q-9858A, Mil-4-45208A. | 1 | |
| STD-12415 | PNEUMATIC CHAIN HOIST, 1000 LB MIN CAPACITY, 5 FT MIN VERTICAL LIFT, 24IN MAX CLOSED HEIGHT | 1 | |
| STD-1310 | MAT NEOPRENE | 1 | |
| STD-3678 | PROTECTIVE MAT-RUBBER, GRADE SC43 NEOPRENE SPONGE 1’’ THICK, 3X4 FEET WITH WARMING STREAMER ATTACHED | 1 | |
| STD-585 | Mat - Protective, 3/8 Inch | 6 | |
| STD-6378 | ENGINE PROTECTIVE MAT | 3 | |
| STD-6935 | GROUND PNEUMATIC UNIT KAESER M45 0.220 PSI/ 0-16BAR | 1 | |
| STD585 | PROTECTIVE MAT | 6 | |
| STD6378 | PROTECTIVE MAT | 3 | |
| STL73300 | POCKET MATE W USB CORD SILVER | 1 | |
| STL73303 | POCKET MATE W USB CORD PINK | 1 | |
| STP10P3C20 | Sioux® Pneumatic Tappers (Clamping capacity: #10-5/16") (Free rpm: 300) (Overall length: 7.3" (185 mm)) (Add to cart: Add To Cart) | 1 | |
| STP10P3C32 | Sioux® Pneumatic Tappers (Clamping capacity: #10-5/16") (Free rpm: 300) (Overall length: 7.3" (185 mm)) (Add to cart: Add To Cart) (Clamping capacity: 1/4"-1/2") (Free rpm: 300) (Overall length: 7.3" (185 mm)) (Add to cart: Add To Cart) | 1 | |
| STS585 | MAT PROT CFM56-7 / LEAP-1B ENG | 1 | |
| STTR-60-8-REF-A | PNEUMATIC SABER SAW | 1 | |
| SUN-130 | WHEELPANTS COVERS (specify material type) (set of 2) | 1 | |
| SUPPORTFEE | REQUIRED ANNUAL SUPPORT FEE FOR PMAT XS® KIT P/N PXS-LDS-10 | 1 | |
| SVB-A8 | AIR SYSTEMS PNEUMATIC AIR POWERED BLOWER | 1 | |
| SWE8202 | PNEUMATIC MULTIPLIER, SWEENEY | 1 | |
| SWE8202A | MULTIPLIER, PNEUMATIC | 4 | |
| SWEENY 8202A | PNEUMATIC TORQUE MULTIPLIER | 1 | |
| SWN443273 | IGLOO PLAYMATE 16 QT COOLER | 1 | |
| SZEA6015 | PNEUMATIC RIVET SQUEEZER, C-TYPE | 2 | |
| Semkit Model 285−P | Drive Mixer − Portable Pneumatic | 1 | |
| Silverwing RMS2 – C-Scan Mapping System control unit | Silverwing RMS2 – C-Scan Mapping System control unit - Ultrasonic corrosion mapping system, Designed to evaluate the condition of ferrous structures, Inspection material thickness up to 150 mm | 1 | |
| Sturdy box or platform | approximately 15 inches high with suitable mounting for dial indicator gage | 1 | |
| T-013755884 | PD242 MOLD-MATE COUPLER | 1 | |
| T-215P | REPAIR KIT, PUNCTURE, PNEUMATC | 1 | |
| T-3000C-2Y | "C" Rivet Squeeze Combo with 2 Yokes! TAYLOR Pneumatic Brand | 1 | |
| T-430490 | Puller, Mating ring | 1 | |
| T-64A21506 | GAGE INFLATOR PNEUMATIC TIRE | 1 | |
| T-7700 | TAYLOR Pneumatic Metal Shears | 1 | |
| T-7763 | Taylor Tool - TAYLOR Pneumatic Screw Gun | 1 | |
| T-8705R | TAYLOR Pneumatic 1/2 Horse Power Router, 3-3/4" Base | 1 | |
| T-888190 | BAG-PNEUMATIC LIFTING KPI 44 | 1 | |
| T-9705R | TAYLOR Pneumatic .9 Horse Power Router, 3-3/4" Base | 1 | |
| T-M-10A | PSP MATERIAL 4PCS | 1 | |
| T-TL690 | 4WAYREPAIRTL PNEUMATICTIRE VLV | 1 | |
| T.53.03 | SHORTS REFERENCE STANDARD Shorts SD 3-30, 53 pages 3-8. Material: 2024-T3 or 2014 AluminumIncludes Test Report and Certificate of Conformance. | 1 | |
| T007922 | DATA PMAT 2000 | 1 | |
| T010070 | Pneumatic Test Box | 1 | |
| T2616 | PRECISION PNEUMATIC CALIBRATED | 1 | |
| T321706 | AUTOMATIC TEST EQUIP- MENT | 1 | |
| T322501 | AUTOMATIC TEST EQUIPMENT | 1 | |
| T335693 | SATCOM AUTOMATIC RF LOOPBACK TESTER | 1 | |
| T430490 | PULLER MATING RING | 1 | |
| T4W | KIT: WHEEL,PNEUMATIC, FOR TR34 | 4 | |
| T529 | PRINTER-MAINTENANCE INFORMATION | 1 | |
| TAY-151 | TIRE COVERS (no wheelpant faring) (specify material type) (set of 2) | 1 | |
| TBD | PC FOR PMAT SOFTWARE | 1 | |
| TBM14M | CRIMP TOOL - POWER, PNEUMATIC | 3 | |
| TD1585 | ARMATURE CLIP | 1 | |
| TEC305-12-KIT-UK | GLUE GUN KIT, 240V, 20W, 12MM STICK DIAMETER, TEC-BOND GLUE, TEC MAT, UK PLUG | 1 | |
| TEK-6002-4130M | 5 Step Wedge w/ Holder, .020" to .100" Steps, 4130M Material | 1 | |
| TER82224 | 615A PMAT LOADER CROSSOVER CABLE | 1 | |
| TEX8PN-3/4 | PNEUMAT.WHEELS 8"X3/4"PAL 250PDS | 1 | |
| TH276 | MATRIX FOR PINNING PLIERS | 2 | |
| TH398S | MATRIX FOR PINNING PLIERS | 3 | |
| TH568 | Turret Head - Pneumatic Use Only | 2 | |
| THAP1-5 | (MTO)-INSERT, POS AUTOMATIC - YELLOW | 1 | |
| THAP163-5A | Automatic Positioner Insert | 1 | |
| THAP493I-2 | (MTO)-INSERT, POSITIONER AUTOMATIC | 1 | |
| THAP493I-4 | Automatic Positioner Insert | 1 | |
| THAP531I-2 | Automatic Positioner Insert | 1 | |
| TI-6AL-4V | BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-70-001. ALSO IN 53-10-01 PART 6 PAGE 5 FIGURE 1. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL: 6AL-4V TITANIUM. SIZE: 1.5"W x 3.75"L x .25" | 3 | |
| TI-6AL-6V-2SN | BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-70-001. ALSO IN 53-10-01 PART 6 PAGE 5 FIGURE 1. EDM NOTCHES: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL: TI-6AL-6V-2SN TITANIUM. SIZE: 1.5"W X 3.75"L X .25" | 3 | |
| TJ20-03-00 | HYDRO-PNEUMATIC PUMP ASSY | 1 | |
| TK2253-4/93 | PNEUMATIC PRESSURE SUPPLY | 1 | |
| TM-275 V2 | OPTİMATE TM-275 V2 LITHIUM BATTERY CHARGER | 1 | |
| TM-REPAIR | TM-REPAIR;Time and Material Repair | 1 | |
| TM32201006 | AIRCRAFT PNEUMATIC TIRE DRAINING VALVE | 1 | |
| TMH TR19-04-00 | HYDRO-PNEUMATIC PUMP ASSY | 2 | |
| TMH TR19-14-00 | KIT OLEOPNEUMATIQUE | 3 | |
| TMH TR20-66-00 | HYDRONEUMATIC PUMP ASSY | 2 | |
| TMHTOUI R2066001 | HYDROPNEUMATIC PUMP ASSY | 1 | |
| TMHTR19-04-00 | HYDRO-PNEUMATIC PUMP ASSY | 2 | |
| TMHTR191400 | OLEOPNEUMATIC KIT | 3 | |
| TMHTR20-66-00 | HYDRO-PNEUMATIC ASSY | 2 | |
| TO-20-001 | REPAIR KIT FOR COMPOSITE MATERIAL | 1 | |
| TOP KIT - PITOT TUBE AUTOMATIO | TOP KIT - PITOT TUBE AUTOMATION REPLACEMENT | 1 | |
| TOYOX 9.5 X 16 | PNEUMATIC HOSE TOYOX 9.5 X 16 | 1 | |
| TP-2100 | AUTOMATIC KARL FISCHER OIL WATER CONTENT TESTING EQUIPMENT (TP-2100) | 1 | |
| TP54 | AIRBUS REFERENCE STANDARD A318-A321 51-63-07-PB1, PAGE 2 SHEET 01. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| TP54-02-1 | AIRBUS REFERENCE STANDARD, NTM 53-41-86, A300-600 PT 6 51-10-01, A318-A321 51-63-07-PB1, PAGE 2 SHEET 01. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| TP54-07-1 | AIRBUS SPLIT CALIBRATION REFERENCE STANDARD A318-A321 51-63-07-991-002 PB1. MATERIAL: 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance. | 2 | |
| TPAP904 | Automatic Positioner Insert | 1 | |
| TPGDL150 | MANOMETRO MEDIDOR PRESION DIGITAL NEUMATICOS | 2 | |
| TPMB10 | BLUE-POINT 10'/3M AUTOMATIC POWER TAPE | 1 | |
| TPS8700 | KIT TPS8700 / SYSTÈME DE TEST ET PROGRAMMATION | 2 | |
| TR/TM AC-150 | PNEUMATIC POWER CART | 1 | |
| TR19-04-00 | HYDRO-PNEUMATIC PUMP ASSY | 1 | |
| TRI-LKG-ANT-DUAL-DUCK-F | TRI-LKG-ANT-DUAL-DUCK-F;Dual-Band Frequency Matched for DSP-ONX -- Rev - | 1 | |
| TRI-TM-REPAIR | TRI-TM-REPAIR;Repair using Time and Material charges | 1 | |
| TRS-5-1A-2024T3 | ALUMINUM 5 STEP WEDGE, STEP THICKNESS: .100", .200", .300", .400", .500" MATERIAL: 2024-T3 ALUMINUM. PAD SIZE: .75" X .75" TOLERANCE = ± .001 | 1 | |
| TRS-6-12A | Custom 6 Step Wedge .020", .040", .080", .150" ,0.300", 0.600" +/-.001", Per Drawing Specification TXX003503. Material: 2219-T81 Aluminum. Includes Teflon Base. | 1 | |
| TRS-6-12I | Custom 6 Step Wedge .040", .050", .060", .075" ,0.090", 0.110" +/-.001", Per Drawing Specification TXX003461. Material: 718 Inconel. Includes Teflon Base. | 1 | |
| TS20178 (03147A-1-1/2) | PNEUMATIC, ALLIGATOR SQUEEZER | 1 | |
| TS212-8 | EXPENDABLE MATERIAL | 7 | |
| TS2560-HG | PNEUMATIC CARTRIDGE GUN DISPENSER | 1 | |
| TS400X | PNEUMATIC GLUE GUN | 1 | |
| TS6500CIM-6 | TechCon Systems TS6500CIM-6 TechKit Automatic Aerospace Sealant Mixer for 2.5, 6, 8 oz Kits | 1 | |
| TS950-60-HA | TechCon Systems TS950-60-HA Black 6 oz Pneumatic Sealant Gun | 1 | |
| TX-2AMF | PNUMATIC PIG 200PSI | 1 | |
| TYPE025 | POLISHER,PNEUMATIC | 1 | |
| TYPEF | EDDY CURRENT EQUIPMENT DEFECTOMAT | 1 | |
| Ti-6AL-4V BLOCK | Titanium Block 110mm(3.937") x 18mm(7.09") x 15mm(.591") Block. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. | 1 | |
| Ti-6AL-6V-2sn | BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-70-001. ALSO IN 53-10-01 PART 6 PAGE 5 FIGURE 1. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL: TI-6AL-6V-2SN TITANIUM. SIZE: 1.5"W x 3.75"L x .25" | 3 | |
| U-1021 | WHEEL, PNEUMATIC TIRE | 2 | |
| U-1024 | WHEEL, PNEUMATIC TIRED | 2 | |
| U-1027 | WHEEL PENUMATIC TIRE | 3 | |
| U-1041 | WHEEL, PNEUMATIC | 2 | |
| U-1096 | WHEEL, PNEUMATIC TIRED | 3 | |
| U-1125 | CASTER,PNEUMATIC, SWIVEL | 1 | |
| U-1126 | WHEEL, PNEUMATIC | 1 | |
| U1021 | PNEUMATIC TIRE WHEEL, | 2 | |
| U1024 | WHEEL: PNEUMATIC,W/TIRE, | 2 | |
| U1027 | WHEEL: PNEUMATIC TIRE, | 3 | |
| U1041 | PNEUMATIC WHEEL, | 2 | |
| U1096 | WHEEL: PNEUMATIC TIRED, | 3 | |
| U8450007 | DUAL TRANSDUCER. 5 MHZ. 0.434 TIP DIAMETER. RIGHT ANGLE LEMO 00 CONNECTOR. MATCHING CABLE = LCLD-316 | 1 | |
| U8770054 | 6 MM (0.236 IN) DIAMETER, 11.430 MM (0.450 IN) LENGTH APPROXIMATELY. USE FOR 8 MM (0.315 IN) ≤ T ≤ 25 MM (0.984 IN) | 1 | |
| U8770059 | DELAY LINE DHL-109 6 MM (0.236 IN) DIAMETER, 19.05 MM (0.750 IN) LENGTH APPROXIMATELY. USE FOR 25 MM (0.984 IN) ≤ T ≤ 35 MM (1.378 IN) | 1 | |
| U877069 | DELAY LINE DHL-3 3.175 MM (0.125 IN) DIAMETER, 5.54 MM (0.218 IN) LENGTH APPROXIMATELY. USE FOR 0.6 MM (0.024 IN) ≤ T ≤ 8 MM (0.315 IN) | 1 | |
| UB767-A340 | FUSIBLE POUR FOURCHE USIMAT SERMEES | 1 | |
| ULTPLIERSDWR-ASY | ULTIMATE PLIER DWR ASSEMBLED | 1 | |
| UP5771 | GRINDER,DIE,PNEUMATIC,PORTABLE, 5130-56-060-5104 | 1 | |
| URL-130 | WHEELPANTS COVERS (specify material type) (set of 2) | 1 | |
| US114TCC | PNEUMATIC RIVET SQUEEZER | 4 | |
| US4X | HAMMER PNEUMATIC | 2 | |
| US7387PK-2800 | PNEUMATIC DRILL | 1 | |
| US7387PS | PNEUMATIC POWER SHEAR | 1 | |
| US7387RSE | SHAVER,RIVET HEAD,PORTABLE,PNEUMATIC | 1 | |
| USIPRG510A | PNEUMATIC POP RIVET | 1 | |
| UT-RC-551018-MA | 5 STEP CALIBRATION BLOCK (UT) METRIC 5A(2.5, 5.0, 7.5, 10.0 & 12.5MM) MATERIAL: 1018 CARBON STEEL | 1 | |
| UT8315C | PNEUMATIC DRILL | 1 | |
| UT8963 | PNEUMATIC SCREW DRIVER | 1 | |
| V.999A | PNEUMATIC BLOW GUN | 1 | |
| V2 | V2 TEST BLOCK STEEL THICKNESS: 20mm/ THICKNESS: 25mm/ INCLUDED MAKER CERTIFICATION AND ABS PLASTIC CASE MATERIAL AVAILABLE FOR ALUMINUM 25mm/ STANLESS STEEL 20mm/ STANLESS STEEL 25mm/ | 2 | |
| V7950-93-S114 | PNEUMATIC JET STARTER HOSE | 3 | |
| VAC-PUMPS | PNEUMATIC SUCTION PUMP TOOL | 1 | |
| VALISEMECABEL | MANO PNEUMATIQUE | 1 | |
| VAR0000891 | PNEUMATIC SEALANT GUN 250 | 1 | |
| VC 010 | Boeing Reference Standard For MR-TCDL Modification (L3H). Material: 7050-T7451 or 7075-T7351 & 2024-T351 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| VC 011 | Boeing Reference Standard For MR-TCDL Modification (L3H). Material: 7050-T7451 or 7075-T7351 & 2024-T351 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| VC009 | BOEING R & D LFEC REFERENCE STANDARD Material: 7076-T6 Clad Aluminum. Fasteners HL18PB6-3, NAS620-10L, MS21042. Includes Test Report and Certificate of Conformance. | 1 | |
| VDC-6AX | MITUTOYO DIGIMATIC DEPTH GAUGE | 1 | |
| VDS-6DCX | MITUTOYO DIGIMATIC DEPTH GAUGE | 2 | |
| VP2-X | PNEUMATIC VIBRO-PEN | 3 | |
| VP2X | PNEUMATIC MARKER VIBRO-PEN | 3 | |
| W-53066TR | TIRE: PNEUMATIC,SNGL DISK, | 3 | |
| W-87 REF STD IBD | BOEING REFERENCE STANDARD. W-87 INBOARD 360 REFERENCE STANDARD. Materials: 2024-T351 and 7075-T651 Aluminum. Includes Test Report Traceable to NIST. | 1 | |
| W-87 REF STD OBD | BOEING REFERENCE STANDARD. W-87 OUTBOARD 360 REFERENCE STANDARD. Materials: 2024-T351 and 7075-T651 Aluminum. Includes Test Report Traceable to NIST. | 1 | |
| W-HV400/62 | Bowers W-HV400/62 Test Stand for HV400 Ultramatic Probe | 1 | |
| W-HVGUIDE | Bowers W-HVGUIDE Guide Support for Ultramatic Tester | 1 | |
| W2621 | PNEUMATIC RATCHET SCREWDRIVER W2621 | 1 | |
| W500-30-931-GB | PNEUMATIC CYLINDIRICAL INSTALL TOOL GUIDE BUSHING | 2 | |
| W500-30-931GB | PNEUMATIC INSTALLATION | 2 | |
| W53066TR | TIRE: PNEUMATIC,SNGL DISK, | 3 | |
| W800-20-IR | MONOGRAM FOR CLECO-PNEUMATIC TOOL | 1 | |
| WA22 | PNEUMATIC CRIMP TOOL | 2 | |
| WA22-CC | Pneumatic Crimp Tool with Cycle Counter | 2 | |
| WA22-LC-X1 | Hand-Held Pneumatic Indent Crimp Tool | 2 | |
| WA22AB | (MTO)-PNEUMATIC CRIMP TOOL | 1 | |
| WA22AE | Pneumatic Indent Crimp Tool - MH992 Equivalent | 2 | |
| WA22AP | (MTO)-PNEUMATIC CRIMP TOOL-AUTO POS | 1 | |
| WA22BC | Pneumatic Crimp Tool - Bias Crimp | 2 | |
| WA22BCSS | (MTO)-PNEUMATIC TOOL WITH SIDE SELECTOR | 1 | |
| WA22BESS | Pneumatic Crimp Tool - Equivalent to AFM-10 | 2 | |
| WA22BH | Pneumatic Crimp Tool - Equivalent to MH835 | 2 | |
| WA22BT-MG | PNEUMATIC CRIMP TOOL- MEDICAL GREASE | 1 | |
| WA22CX | PNEUMATIC CRIMP TOOL | 1 | |
| WA22CX-CC | (MTO)-PNEUMATIC TOOL WITH CYCLE COUNTER | 1 | |
| WA22DA | (MTO)-PNEUMATIC TOOL | 1 | |
| WA22DC | Pneumatic Crimp Tool | 1 | |
| WA22DD | (MTO)-PNEUMATIC CRIMP TOOL-SINGL PURPOSE | 1 | |
| WA22EB | (MTO)-PNEUMATIC CRIMP TOOL | 1 | |
| WA22F | Pneumatic Crimp Tool | 1 | |
| WA22H | Pneumatic Indent Crimp Tool - MH800 Equivalent | 2 | |
| WA22M | Pneumatic Crimp Tool - Equivalent to MH820 | 2 | |
| WA22P | Pneumatic Indent Crimp Tool - MH860 Equivalent | 2 | |
| WA22PAP | Automatic Crimp Tool Assembly | 1 | |
| WA22PQ | Pneumatic Crimp Tool | 1 | |
| WA22PSS | Pneumatic Crimp Tool - Equivalent to MH860 | 2 | |
| WA22PSSQA | Automatic Postioner Crimp System | 1 | |
| WA22QA | Automatic Postioner Crimp System | 1 | |
| WA22SS | Pneumatic Crimp Tool, Equivalent to AFM8 (M22520/2*) | 2 | |
| WA22SSQA | Pneumatic Crimp Tool | 2 | |
| WA22U | Pneumatic Indent Crimp Tool - 39-000 Equivalent | 2 | |
| WA22VIC | (MTO)-PNEUMATIC CRIMP TOOL | 1 | |
| WA23 | PNEUMATIC CRIMP TOOL | 11 | |
| WA23-01 | PNEUMATIC CRIMPING TOOL | 1 | |
| WA23B | PNEUMATIC CRIMP TOOL | 1 | |
| WA27-009 | PNEUMATIC CRIMP TOOL | 1 | |
| WA27-300BT-EP | Pneumatic Indent Crimp Tool - Equivalent to M300-BT | 2 | |
| WA27-309 | Pneumatic Indent Crimp Tool - Equivalent to M309 Selector Settings 1-4 | 2 | |
| WA27-309-2C | Pneumatic Indent Crimp Tool - Equivalent to M309 | 2 | |
| WA27-309-2C-MG | (MTO)-PNEUMATIC TOOL (MEDICAL GREASE) | 1 | |
| WA27-309-EP | Pneumatic Indent Crimp Tool- Equivalent to M309 Selector Setting 5-8 | 2 | |
| WA27-309EP | PNEUMATIC CRIMPING TOOL | 2 | |
| WA27-312 | PNEUMATIC CRIMP TOOL | 1 | |
| WA27-324-EP | (MTO)-PNEUMATIC CRIMP TOOL | 1 | |
| WA27-501 | (MTO)-PNEUMATIC CRIMP TOOL | 1 | |
| WA27-503 | (MTO)-PNEUMATIC CRIMP TOOL | 1 | |
| WA27AE | Pneumatic Crimp Tool | 1 | |
| WA27AJ | (MTO)-PNEUMATIC CRIMP TOOL - BIAS CRIMP | 1 | |
| WA27AS | PNEUMATIC CRIMP TOOL-BLANK GAGE BLOCK | 1 | |
| WA27BM | Pneumatic Crimp Tool | 1 | |
| WA27BW-EP | Pneumatic Crimp Tool | 1 | |
| WA27CE | (MTO)-PNEUMATIC CRIMP TOOL | 1 | |
| WA27CG | Pneumatic Indent Crimp Tool - Equivalent to 1716P-1 | 2 | |
| WA27CS | (MTO)-PNEUMATIC CRIMP TOOL | 1 | |
| WA27CW | (MTO)-PNEUMATIC CRIMP TOOL W/TP1757 | 1 | |
| WA27CX | (MTO)-PNEUMATIC TOOL | 1 | |
| WA27CY | (MTO)-PNEUMATIC CRIMP TOOL | 1 | |
| WA27E | Pneumatic Indent Crimp Tool - Equivalent to FT-8 | 2 | |
| WA27F | PNEUMATIC CRIMP TOOL | 3 | |
| WA27F-CC | Pneumatic Indent Crimp Tool - Equivalent to AF8 with Cycle Counter | 2 | |
| WA27F-EP | Pneumatic Crimp Tool | 1 | |
| WA27F-MG | (MTO)-PNEUMATIC TOOL W/MED GREASE | 1 | |
| WA27F2-EP | (MTO)-PNEUMATIC CRIMP TOOL | 1 | |
| WA27F2-MS-2C | PNEUMATIC TOOL W/MAG SENSOR (FP & B MT) | 1 | |
| WA27FAP | (MTO)-PNEUMATIC CRIMP TOOL - AUTOMATIC | 1 | |
| WA27FQ | (MTO)-PNEUMATIC CRIMP TOOL | 1 | |
| WA27FQA | Automatic Postioner Crimp System | 1 | |
| WA27FSS | Pneumatic Indent Crimp Tool - Equivalent to AF8 with Side Selector | 2 | |
| WA27FSS-CC | Pneumatic Indent Crimp Tool - Equivalent to AF8 with Side Selector and Cycle Counter | 2 | |
| WA27FSSQA | Automatic Pneumatic Crimp Tool | 1 | |
| WA27R | Pneumatic Indent Crimp Tool - Equivalent to GS200-1 | 2 | |
| WA27RF | Air Regulator and Filter Accessory for Use with WA Series Pneumatic Crimp Tools | 2 | |
| WA27S | Pneumatic Crimp Tool | 1 | |
| WA27T | Pneumatic Crimp Tool | 1 | |
| WA27VM8 | Pneumatic Indent Crimp Tool - Equivalent to VM8 | 2 | |
| WA27W | Pneumatic Crimp Tool | 1 | |
| WA27XE-EP | Pneumatic Indent Crimp Tool - Equivalent to GS2XE | 2 | |
| WA27XF | (MTO)-PNEUMATIC CRIMP TOOL# | 1 | |
| WA27XFAP | (MTO)-AUTOMATIC CRIMP TOOL ASSEMBLY | 1 | |
| WA2F-CC | Pneumatic Indent Crimp Tool - AF8 Equivalent - with Cycle Counter | 1 | |
| WESTER BM-20 | DRILL PNEUMATIC | 1 | |
| WHEEL SCAN 5 | AUTOMATIC WHEEL INSPECTION SYSTEM | 1 | |
| WHEELSCAN MK IV | AUTOMATIC EDDY CURRENT A/C WHEEL INSPECTION (NDT) | 1 | |
| WK-3 | STANDARD PNEUMATIC WHEEL KIT | 1 | |
| WK-7 | HANGAR CART WHEEL KIT - PNEUMATIC TIRE KIT - 18 INCH HEIGHT IAW NEC ARTICLE 513-10 | 2 | |
| WP-632AM | WOODPECKER AUTOMATE TAP TEST TOOL | 5 | |
| WP-632AM-R | AUTOMATIC TAP TESTER WOODPECKER | 1 | |
| WP632AM | AUTOMATIC TAP TESTER-WOODPECKER | 5 | |
| WS400 | Boeing Custom Contact Radius Shoe WS400 with a 0.400" radius. Material: Lucite/Cast Acrylic. 787 Part 4 51-00-23. Includes Certificate of Conformance. | 1 | |
| WSP-1014 | Pneumatic Wire Stripper (10 - 14 AWG) | 2 | |
| WSP-1626E | WSP-1626E Pneumatic Wire Stripper (16 - 26 AWG) | 2 | |
| WSP-1630 | Pneumatic Wire Stripper (16 - 30 AWG) | 2 | |
| WT-01920 | FIXTURE, WELDING WITH AUTOMATED VARIABLE SPEED TURNTABLE | 1 | |
| WYXCCBRH01 | BREACH/BLK OPS/SMKEGRY/MAT BLK | 1 | |
| WYXCCBRH04 | BREACH MAT HKY/PLRZD BRZ MIR | 1 | |
| WYXCCSLE01 | SLEEK01 MATPRPFRM SLVRFLSH LNS | 1 | |
| WYXCHJKL05 | JAKL CAPT POL BLKMIR MATBLKFRM | 1 | |
| WYXWSEPC03 | EPIC/ CLEAR LENS / MATTE CRYST | 1 | |
| X-Y RECORDER | PLOTOMATIC MODEL 815 | 1 | |
| XBA24NW205 | CRAP MAT & DICE PACK | 1 | |
| XEN-255 | WHEELPANT COVERS (specify material type) (set of 2) | 1 | |
| XLR-9703-01 | Automated loop and joint resistance tester for Boeing aircraft models 737,747,757,767,777,787 and KS | 6 | |
| XLR-9703-01 | Automated Loop & Joint Tester Kit | 6 | |
| XLR90703-01 | AUTOMATED LOOP AND JOINT RESISTANCE TEST, | 1 | |
| XLVUD6120 | SPECIAL PURPOSE TYPE:TURBINE BORESCOPE POWER:BATTERY SIZE:NA MATL:NA GE TURBINE BORESCOPE TOOL MODEL: XLVUD6120 PART NO: 1850A4268 MANUFACTURER: GE | 2 | |
| XPS16 | AUTOMATIC 4-AXIS CNC DRILL SHARPENER AND GRINDER D | 1 | |
| XS19471M34G02 | PMAT – CABLE ASSEMBLY | 1 | |
| XXX2 | PORTABLE NITROGEN BLOWING EQUIPMENT WITH TROLLEY ( MATCH BOC FOR FITTINGS) -BOC INTERNATIONAL NITROGEN REGULATOR -7.5KG -13KG OUTLET CONNECTION: AS 2473.2; TYPE 50 | 1 | |
| Y16570 | PNEUMATIC SEALANT GUN 250A-6 950-60HA | 1 | |
| Y29NC | PNEUMATIC HYPRESS | 1 | |
| YA746 | OIL GUN,PNEUMATIC; | 2 | |
| YA759 | PNEUMATIC GREASE GUN 5100 | 1 | |
| YA771B | GREASE GUN,PNEUMATIC | 3 | |
| YA772B | BLUE-POINT® PNEUMATIC GREASE GUN | 2 | |
| YA879 | Special Tool Automatische Centerpunt | 1 | |
| YA879A | PUNCH, AUTOMATIC CEN | 2 | |
| YA879B | AUTOMATIC CENTER PUNCHE | 1 | |
| YUNY-800A | AUTOMATIC PRESSURE GAUGE CALIBRATOR | 1 | |
| ZB-A320N-005 | TWO WHEELS AND TIRES, OR AN EQUIVALENT WEIGHT OF APPROXIMATELY 89 KG (196 LB) | 1 | |
| ZC81079G02 | CABLE, POWER SUPPLY TO FADEC-PMAT 2000 | 1 | |
| ZNDN | Automatic Non Drip Nozzle | 1 | |
| ZZA319JZ | PNEUMATIC TOOLS | 1 | |
| 250255 | PPG AEROSPACE® SEMCO® 250255 MODEL 250-A2.5 PNEUMATIC 2.5 OZ SEALANT GUN WITH HANDL | 2 | |
| B90-9911-00 | ACCESSORIES OF PNEUMATIC AND UNITS PRESSURE CHECKING DEVICE | 1 | |
| P2K-EMB-02 | PMAT | 6 | |
| А0505-0000 | PNEUMATIC TEST SET | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
