| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| A32015-10 | Opp 3 | 1 | |
| A71035-4 | Opp 3 | 1 | |
| C27060-4 | Opp 3 | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 02-208-FSS | Inner-Outer Reamers (Material: Aluminum & Soft Materials) (Capacity: 3/16" to 1-1/2" O.D.) (Add to cart: Add To Cart) (Material: Stainless Steel, Copper, Brass) (Capacity: 3/16" to 1-1/2" O.D.) (Add to cart: Add To Cart) | 1 | |
| 04-17 | 04-17 3/32",1/8",5/32" & 3/16" (CROPPERS) | 1 | |
| 04-507-FB | Rol-Air 37° Flaring Tool (Motor: Soft Copper, Aluminum & Brass) (Materials: 3/16", 1/4", 5/16", 3/8", 1/2") (Sizes: 2.5 lbs (1.1 kgs)) (Add to cart: Add To Cart) | 1 | |
| 04-HNXL-1/4 | HEX BODY TEMPORARY FASTENERS ( HOLE DIAMETER: 1/4" )( GRIP RANGE: 0 TO 1" )( BODY INSTALLED: 3-11/16" )( OVERALL LENGTH: 3-7/8" )( COLOR CODE: COPPER ) | 1 | |
| 04-MO-3.0 | MO TYPE MANUAL TEMPORARY FASTENERS ( COLOR CODE-DRILL SIZE: COPPER -- 3.0 MM )( FASTENER SIZE: MO METRIC -- 3.0 MM )( GRIP RANGE: 0 TO 6.5 MM ) | 1 | |
| 04-WNXL-1/8 | 1/8” HOLE DIAMETER - #30 DRILL SIZE - COPPER | 1 | |
| 1-500421-00 | "COPPUS" JECTAIR 3HP HORNET | 1 | |
| 10-56980A | DOOR TRIM COPPER KEHN300 | 1 | |
| 11732 | 12 TON PRESS HEX INSTALLING DIE - USE WITH CATALOG NUMBER 13400 - DIE CODE 21 - COPPER CODE #8 AWG - | 6 | |
| 139G9560H003 A687A | 0 - 1/2 CAP. 1/8 SIZE FOR #30 DRILL (COPPER) | 1 | |
| 14MM | 14MM Copper Spark Plug Gasket M673 AN4027-2 | 2 | |
| 19307588-30 | PMAT2000 TEAC FLOPPY DISK DRIVE MODEL:FD-05HF 8830 | 1 | |
| 212-FB | Rolo-Flair® 37° Rotary Flaring Tool (Maximum torque: Copper & Aluminum Alloys) (Sizes: 1/8", 3/16", 1/4", 5/16", 3/8") (Add to cart: Add To Cart) | 3 | |
| 28-4-P | NICOPRESS ZINC PLATED COPPER SLEEVE - 5/32 INCH | 1 | |
| 34146-0000 | 3-INCH, STRAIGHT, GLASS TUBE EYEDROPPER | 1 | |
| 360-03433 | DMT/PC SOFTWARE FLOPPY 3.5" | 1 | |
| 36018 | COPPER MALLET 1330 GR WOODEN HANDLE NON SPARKING | 1 | |
| 36281 | 3-INCH, STRAIGHT, GLASS TUBE EYEDROPPER | 1 | |
| 498-6560 | 3.5 FLOPPY DRIVE | 1 | |
| 53-1234 | DRILL STOPPER #40, #30, #21, #10, #1/4 | 1 | |
| 60265 | CUTTING WHEEL FOR COPPER 30 X 10 MM (FOR TUBE CUTTER 60359) | 1 | |
| 63110 | CUTTING WHEEL FOR COPPER 18 X 3 MM | 1 | |
| 63206 | COPPER CLEANING BRUSHES INT-EXT (Ø 1/2"- 3/4") | 1 | |
| 68169 | SET RATCHET TUBE BENDER 12/15/18/22 W/REAMER AND CLASSIC TUBE CUTTER 32 MM (COPPER) | 1 | |
| 68170 | SET RATCHET TUBE BENDER 10/12/14/18/22 W/REAMER AND CLASSIC TUBE CUTTER 32 MM (COPPER) | 1 | |
| 68171 | SET RATCHET TUBE BENDER 10/12/15/18/22 W/REAMER AND CLASSIC TUBE CUTTER 32 MM (COPPER) | 1 | |
| 68172 | SET RATCHET TUBE BENDER 10/12/16/18/22 W/REAMER AND CLASSIC TUBE CUTTER 32 MM (COPPER) | 1 | |
| 68173 | SET RATCHET TUBE BENDERS 3/8-1/2-5/8-3/4-7/8" W/REAMER AND CLASSIC TUBE CUTTER 32 MM (COPPER) | 1 | |
| 68227 | SET MULTILAYER 16-18-22 MM W/REAMER AND CLASSIC TUBE CUTTER 32 MM (COPPER) | 1 | |
| 221342 | PPG Semco 221342 Model 388, l350, l378, l384 Poppet Valve | 2 | |
| 312005 | PPG Semco 312005 20cc P-Stopper | 1 | |
| 1016518 | EXTERNAL 3.5 IN USB FLOPPY DRIVE | 1 | |
| 98A12003000000 | UNIT - TOPPING UP HYDRAULIC TANK (PORTABLE) NOW DH13PM | 1 | |
| 98S51605001-206 | MINI ANGLE BEAM ALUMINUM V2 BLOCK ½" (12.5mm) or 1" (25.4 mm) thick, 1" radius opposite 2" radius, with 5/64" diameter side drilled hole (3/4" deep flat bottom hole in 1" thick version). Aluminum 7075-T6. Includes form fitted case. | 3 | |
| 98S51605001-208 | MINI ANGLE BEAM BLOCK CS V2 BLOCK..½" (12.5mm) or 1" (25.4 mm) thick, 1" radius opposite 2" radius, with 5/64" diameter side drilled hole (3/4" deep flat bottom hole in 1" thick version).1018 Carbon Steel with form fitted case | 3 | |
| A25018-14 | FORK (OPP -13) | 1 | |
| A55004-94 | OPP-93 | 1 | |
| A71001-84 | LUG (OPP -83) | 1 | |
| A71035-4 | OPP-3 | 1 | |
| AF-4043/TI | LOW FREQUENCY REFLECTION PROBE .300OD, .400H, 5.5L COPPER SHAFT, OAL 8", 2-10KHZ, TI Includes Test Report and Certificate of Conformance | 1 | |
| AF-NEC-6112-1/Ti | Custom multi-hole reference standard Material: 6AL-4v Titanium. Hole sizes: 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8",11/16" and 3/4". Countersink holes opposite side. Thru hole EDM notches in each hole .005" +/-.001". 3 Surface... | 1 | |
| AFLX-6.5 | ADAPTOR, MICRODOT FEMALE TO MAKE W/COPPER SHAFT, 6.5" TOTAL LENGTH 3" WORKING LENGTH | 1 | |
| AFNDT-2105/COP | 5 STEP BLOCK, .100, .250, .500, .750, 1.00. COPPER, 3/4X3/4 STEP SIZE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3287AL | Custom multi-hole 100° countersink reference standard Material: 7075-T6 Aluminum. Hole sizes: 5/32", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2". Countersink holes opposite side. Thru hole EDM notches in each hole, .020" Deep x .005" Wide +/-.001". Includes T | 1 | |
| AFNDT-3369/7075T6 | Custom 8 hole 100° countersink reference standard Material: 7075-T6 Aluminum. Hole sizes: 5/32", 3/16", 7/32" 1/4", 5/16", 3/8", 7/16", 1/2". Countersink holes opposite side. Thru hole EDM notches in each hole, .020" Deep x .005" Wide +/-.001". Includes | 1 | |
| AFNDT-CHOKE BLOCK-70/30 | CALIBRATION BLOCK 70/30 COPPER-NICKEL | 1 | |
| AFNDT-ROMPAS-7075-T6 | ROMPAS BLOCK, 7075-T6 ALUMINUM ½" (12.5mm) or 1" (25.4 mm) thick, 1" radius opposite 2" radius, with 5/64" diameter side drilled hole (3/4" deep flat bottom hole in 1" thick version). SPECIFICATION: ASTM E-164. (Includes wooden case) | 1 | |
| AFNDT-VL769-1A | TITANIUM VERTICAL(INBOARD LUG) ULTRASONIC REFERENCE STANDARD(.800"THICK, 3.56" OUTSIDE RADIUS WITH A 1.312" BORE DIAMETER. COPPER BERYLLIUM NON FLANGED BUSHING WITH A 1.128 BORE DIA. ( 2 EACH .100" x .100" CORNER NOTCHES) | 1 | |
| AFNDT-VL769-2A | TITANIUM VERTICAL(INBOARD LUG) ULTRASONIC REFERENCE STANDARD(1.500" THICK, 3.56" OUTSIDE RADIUS WITH A 1.312" BORE DIAMETER. COPPER BERYLLIUM NON FLANGED BUSHING WITH A 1.128 BORE DIA. ( 2 EACH .100" x .100" CORNER NOTCHES) | 1 | |
| APN-8FX/350KHZ-3MHZ | STRAIGHT COPPER SHAFT FLEXIBLE SURFACE PROBE, ABS, 350KHz-3MHz .125"Ø (3.3mm) TIP, 8.0"(203.2mm) LONG WITH MICRODOT CONNECTOR. . Includes Test Report and Certificate of Conformance. | 1 | |
| APR-31 | USATCO HEAVY-DUTY RIVET CHOPPER, 1/16" TO 5/32" (1/8" TO 1/2"L) | 1 | |
| AWBPH13 | SLOPPED ALLEN WRENCH SET 0.050-3/8 (13 P | 3 | |
| B27011-4 | OPP-3 | 6 | |
| B71008-24 | OPP-23 | 1 | |
| C21003-24 | R END (OPP -23) | 1 | |
| C21003-31 | TUBE 2 (OPP -30) | 1 | |
| C21003-33 | TUBE 3 (OPP -32) | 1 | |
| C21003-37 | TUBE 5 (OPP -36) | 1 | |
| C24004-38 | ANGLE (OPP -30) | 1 | |
| C27011-4 | OPP-3 | 1 | |
| C27047-33 | Opposite -32 | 1 | |
| C55007-4 | OPP-3 | 1 | |
| C71003-231 | RETAINER -0 OPPOSITE -230 | 1 | |
| C71020-24 | Opposite 23 | 1 | |
| C71020-4 | OPPOSITE-3 | 2 | |
| CKS8SILB302 | .030 COPPER-SILICON CUSI3 | 1 | |
| CKS8SILB352 | .035 COPPER-SILICON CUSI3 | 1 | |
| CPENFLX-13 | 1/8" Straight Surface Probe, 50-500KHZ, Copper Flexshaft, 13" Length Coax connector | 1 | |
| DISK-DRIVE | DISK-DRIVE FOR 3.5" FLOPPY DISK | 1 | |
| DMFLX-13 | Adaptor, Dual Microdot Female to Male w/ 13" copper shaft | 1 | |
| EDK0106-X | PRECISION CUTTING ELECTRODES, 3/16 IN. NOMINAL, COPPER ALLOY, 5/PACK | 1 | |
| EDK0206 | PRECISION CUTTING ELECTRODES, 3/16 IN. NOMINAL, COPPER ALLOY, 5/PACK | 1 | |
| EZRB7946 | 3 POINT COPPER CRIMPER | 1 | |
| F80025-4 | OPP-3 | 1 | |
| G26012-54 | OPP-53 | 1 | |
| G32028-133 | OPP-132 | 1 | |
| G38005-35 | SIDE PANEL OPP -34 | 1 | |
| G49002-104 | OPPOSITE-103 | 1 | |
| G49002-42 | OPPSITE-38 | 1 | |
| G51001-32 | OPP-31 | 1 | |
| G52023-4 | OPPODITE-3 | 1 | |
| HD002-03 | Die Set Assembly - Confined Crescent for 3/0 AWG Copper Insulated Terminals | 2 | |
| HD485-03 | Die Set Assembly - Hex Cavity for 3/0 AWG Uninsulated Copper Terminals | 2 | |
| HST3000-CUT1-SIM-ENC | HST3000-CUT1-SIM-ENC;HST3000 Copper T1 SIM - Encore | 1 | |
| HST3000-WB2-ENC | HST3000-WB2-ENC;WB2 Copper Test SIM - Encore | 1 | |
| HST3000C-NG2-1-DF-ENC | HST3000C-NG2-1-DF-ENC;HST-3000 Mainframe Optrex LCD Copper - Encore | 1 | |
| J27026-14 | OPP-13 | 1 | |
| J27026-36 | OPP-35 | 1 | |
| J27026-54 | OPP-53 | 1 | |
| J32069-10 | B PIN/INDEX ASSEMBLY (OPPOSITE J32069-9 | 1 | |
| J32069-12 | TORSION LINK ASSEMBLY (OPPOSITE J32069-11) | 1 | |
| J32069-133 | B SMALL INDEX ASSEMBLY (OPPOSITE J32069-132) | 1 | |
| J32069-135 | B PIN/INDEX ASSEMBLY (OPPOSITE J32069-134) | 1 | |
| J32069-136 | TORSION LINK ASSEMBLY (OPPOSITE J32069-136) | 1 | |
| J32069-137 | TORQUE LINK ASSEMBLY (OPPOSITE J32069-136) | 1 | |
| J32069-14 | TORSION LINK ASSEMBLY (OPPOSITE J32069-13 | 1 | |
| J32069-140 | B CLOCKING ASSEMBLY (OPPOSITE J32069-140) | 2 | |
| J32069-141 | B CLOCKING ASSEMBLY (OPPOSITE J32069-140) | 2 | |
| J32069-22 | B CLOCKING ASSEMBLY (OPPOSITE J32069-21) | 2 | |
| J52009-32 | LOCK BODY OPP -31 | 1 | |
| JHW20003 | 3 IN C CLAMP COPPER SCREW | 1 | |
| KCP1423AZJI4 | PRPL/COPPER/SSTPS 73IN RC | 1 | |
| KCP1423AZJU8 | COMGRN/COPPER/BLTPS 73IN RC | 1 | |
| KEHN300A0ZJO | OVERHEAD 30IN BERRY/COPPER | 1 | |
| KEHN300A0ZJU | OVERHEAD 30IN COMGRN/COPPER | 1 | |
| KEHN300A0ZKC | OVERHEAD, 30IN ARCSILV/COPPER | 1 | |
| KELP301CLCKC | PWRLKR 30X30 ASIL/COPPER/CRM | 1 | |
| KELP301CLCKH | PWR LKR 30X30 TEAL/COPPER/CRM | 1 | |
| KELP301CLZJI | PWR LKR 30X30 PRPL/COPPER | 1 | |
| KELP301CLZJR | PWRLKR 30X30 STMGRY/COPPER | 1 | |
| KELP301CLZJY | PWRLKR 30X30 RYLBLU/COPPER | 1 | |
| KELP301CLZKD | PWRLKR 30X30 MIDBLU/COPPER | 1 | |
| KELP301CLZKE | PWRLKR 30X30 FBLK/COPPER | 1 | |
| KELP301CLZKH | PWRLKR 30X30 TEAL/COPPER | 1 | |
| KELP301CLZKI | PWRLKR 30X30 COMTAN/COPPER | 1 | |
| KELP301CLZKJ | PWR LKR 30X30 GUNMTL/COPPER | 1 | |
| KELP301CLZKK | PWRLKR 30X30 LIQSIL/COPPER | 1 | |
| KELP301CLZKL | PWRLKR 30X30 SAPP/COPPER | 1 | |
| KELP301CLZLO | PWRLKR 30X30 BLK-MIDBLU/COPPER | 1 | |
| KELP301CLZMF | PWRLKR 30X30 BLK-TEAL/COPPER | 1 | |
| KELP301CRCKC | PWRLKR 30X30 ASIL/COPPER/CRM | 1 | |
| KELP301CRCKH | PWR LKR 30X30 TEAL/COPPER/CRM | 1 | |
| KELP301CRZJI | PWR LKR 30X30 PRPL/COPPER | 1 | |
| KELP301CRZJR | PWRLKR 30X30 STMGRY/COPPER | 1 | |
| KELP301CRZJY | PWRLKR 30X30 RYLBLU/COPPER | 1 | |
| KELP301CRZKD | PWRLKR 30X30 MIDBLU/COPPER | 1 | |
| KELP301CRZKE | PWRLKR 30X30 FBLK/COPPER | 1 | |
| KELP301CRZKH | PWRLKR 30X30 TEAL/COPPER | 1 | |
| KELP301CRZKI | PWRLKR 30X30 COMTAN/COPPER | 1 | |
| KELP301CRZKJ | PWR LKR 30X30 GUNMTL/COPPER | 1 | |
| KELP301CRZKK | PWRLKR 30X30 LIQSIL/COPPER | 1 | |
| KELP301CRZKL | PWRLKR 30X30 SAPP/COPPER | 1 | |
| KELP301CRZLO | PWRLKR 30X30 BLK-MIDBLU/COPPER | 1 | |
| KELP301CRZMF | PWRLKR 30X30 BLK-TEAL/COPPER | 1 | |
| KERN361A0ZKE | 1BK 36IN RC FBLK/COPPER | 1 | |
| KERN361A1ZJQ | 1BK 36IN RC SSBLU/COPPER/SST | 1 | |
| KERN361B0ZJQ | 1BK 36IN RC SSBLU/COPPER | 1 | |
| KERN361B0ZKL | 1BK 36IN RC SAPP/COPPER | 1 | |
| KERN361B1ZJI | 1BK 36IN RC PRPL/COPPER/SST | 1 | |
| KERN361B1ZJV | 1BK 36IN RC WHT/COPPER/SST | 1 | |
| KERN361B1ZKH | 1BK 36IN RC TEAL/COPPER/SST | 1 | |
| KERN361B1ZMF | 1BK 36IN RC BLK-TEAL/COPPER/SS | 1 | |
| KERN361B7ZJQ | 1BK 36IN RC SSBLU/COPPER/BLT | 1 | |
| KERN361B7ZJU | 1BK 36IN RC COMGRN/COPPER/BLT | 1 | |
| KERN361B7ZJV | 1BK 36IN RC WHT/COPPER/BLT | 1 | |
| KERN361B8ZKI | 1BK 36IN COMBAT TAN/COPPER | 1 | |
| KERP361B1ZEU | 1BK POWRC 36IN BLK/COPPER/SST | 1 | |
| KERP361B1ZJV | 1BK PWR 36IN RC WHT/COPPER | 1 | |
| KERP361B7ZEU | 1BK PWR RC 36IN BLK/COPPER/BLT | 1 | |
| KETN843C0ZJY | 3BK RC RYLBLU/COPPER | 1 | |
| KETN843C4CKH | 3BK 84IN TEAL/COPPER/SSTLED/CR | 1 | |
| KETN843C4ZEU | 3BK 84IN BLK/COPPER/SSTLED | 1 | |
| KETN843C4ZJQ | 3BK 84IN SSBLU/COPPER/SSLTED | 1 | |
| KETN843C4ZJV | 3BK 84IN WHT/COPPER/SSTLED | 1 | |
| KETN843C4ZKD | 3BK 84IN MIDBLU/COPPER/SSTLED | 1 | |
| KETN843C4ZKJ | 3BK 84IN GUNMTL/COPPER/SSTLED | 1 | |
| KETN843C8ZEU | 3BK 84IN BLK/COPPER/BLTLED | 1 | |
| KETN843C8ZJI | 3BK 84IN PRPL/COPPER/BLTLED | 1 | |
| KETN843C8ZJO | 3BK 84IN BERRY/COPPER/BLTLED | 1 | |
| KETN843C8ZJQ | 3BK 84IN SSBLU/COPPER/BLTLED | 1 | |
| KETN843C8ZJR | 3BK 84IN STMGRY/COPPER/BLTLED | 1 | |
| KETN843C8ZJV | 3BK 84IN WHT/COPPER/BLTLED | 1 | |
| KETN843C8ZJY | 3BK RYLBLU/COPPER/BLTLED | 1 | |
| KETN843C8ZKC | 3BK ASIL/COPPER/BLTLED | 1 | |
| KETN843C8ZKD | 3BK 84IN MIDBLU/COPPER/BLTLED | 1 | |
| KETN843C8ZKJ | 3BK 84IN GUNMTL/COPPER/BLTLED | 1 | |
| KETP843C0CJV | 3BK RC PWR 84IN WHT/COPPER | 1 | |
| KETP843C0ZEU | 3BK RC W PWR 84IN BLK/COPPER | 1 | |
| KETP843C0ZJV | 3BK RC W PWR 84IN WHT/COPPER | 1 | |
| KETP843C0ZJY | 3BK POWRC RYLBLU/COPPER | 1 | |
| KETP843C0ZKH | 3BK RC PWR TEAL/COPPER | 1 | |
| KETP843C0ZMW | 3BK RC PWR GRNENVY/COPPER | 1 | |
| KETP843C1ZLA | 3BK PWR RC BLK-WHT/COPPER/SST | 1 | |
| KETP843C6ZJQ | 3BK PWR RC SSONIC/COPPER/WOOD | 1 | |
| KETP843C6ZJU | 3BK PWR RC COMGRN/COPPER/WOOD | 1 | |
| KETP843C6ZKH | 3BK PWR RC TEAL/COPPER/WOOD | 1 | |
| KETP843C6ZMW | 3BK PWR RC GRNENVY/COPPER/WOOD | 1 | |
| KETP843C7ZJQ | 3BK RC SSBLU/COPPER/BLT | 1 | |
| KETP843C7ZJU | 3BK RC COMGRN/COPPER/BLT | 1 | |
| KETP843C7ZKD | 3BK RC MIDBLU/COPPER/BLT | 1 | |
| KEWN3036AZKL | WORKCENTER 36IN SAPP/COPPER | 1 | |
| KEXN603C0ZJU | 3BK RC 120IN COMGRN/COPPER | 1 | |
| KEXN603C0ZKI | 3BK RC 120IN COMTAN/COPPER | 1 | |
| KEXN603C4ZJV | 3BK RC WHT/COPPER/SSTPWR | 1 | |
| KEXP603A0ZJQ | 3BK RC 120IN-SSBLU/COPPER | 1 | |
| KEXP603A0ZJU | 3BK RC 120IN – COMGRN/COPPER | 1 | |
| KEXP603A0ZKI | 3BK RC 120IN COMTAN/COPPER | 1 | |
| KEXP603A0ZLA | 3BK RC 120IN BLK-WHT/COPPER | 1 | |
| KEXP603A0ZMF | 3BK RC 120IN BLK-TEAL/COPPER | 1 | |
| KHN-3/16 | 3/16 ” HEX NUT DRAW CLECO -0-1/2” GRIP RANGE –COPPER BODY COLOR | 1 | |
| KHN-3/32 | 3/32 ” HEX NUT DRAW CLECO -0-1/2” GRIP RANGE –COPPER BODY COLOR | 1 | |
| KHN-5/32 | 5/32 ” HEX NUT DRAW CLECO -0-1/2” GRIP RANGE –COPPER BODY COLOR | 1 | |
| KHN-7/32 | 7/32 ” HEX NUT DRAW CLECO -0-1/2” GRIP RANGE –COPPER BODY COLOR | 1 | |
| KJTP843C0ZKC | 3BK 84IN JPN RC ASIL/COPPER | 1 | |
| KJTP843C3ZKH | 3BK RC JPN TEAL/COPPER/BLTLED | 1 | |
| KRA1405ZEU | 36IN 5DRW SECT BLK/COPPER | 1 | |
| KRA1406ZJO | 1422/3 END CAB BERRY/COPPER | 1 | |
| KRA1406ZJQ | 1422/3 END CAB SSBLU/COPPER | 1 | |
| KRA1406ZJR | 1422/3 END CAB STMGRY/COPPER | 1 | |
| KRA1472ZEU | 73IN WC BLK/COPPER | 1 | |
| KRA1472ZJO | 73IN WRKCENTR BERRY/COPPER | 1 | |
| KRA1472ZJQ | 73IN WC SSBLU/COPPER | 1 | |
| KRA1472ZJR | 73IN WC STMGRY/COPPER | 1 | |
| KRA1472ZJY | 73IN WRKCENTR RYLBLU/COPPER | 1 | |
| KRA1472ZKD | 73IN WRKCNTR MIDBLU/COPPER | 1 | |
| KRA1472ZKI | 73IN WRKCENTR COMTAN/COPPER | 1 | |
| KRA1472ZMW | 73IN WRKCNTR GRNENVY/COPPER | 1 | |
| KRA2411ZJV | 13 DRWR RC WHT/COPPER | 1 | |
| KRA2423ZEU7 | RC 73IN BLK/COPPER/BLT | 1 | |
| KRA2423ZKD7 | RC 73IN MIDBLU/COPPER/BLT | 1 | |
| KRL1033EZEU | 3BK RC BLK/COPPER | 1 | |
| KRL1033EZEU1 | 3BK RC BLK/COPPER/SST | 1 | |
| KRL1033EZJQ | 3BK RC SSBLU/COPPER | 1 | |
| KRL1033EZJU | 3BK RC COMGRN/COPPER | 1 | |
| KRL1033EZKH1 | 3BK RC TEAL/COPPER/SST | 1 | |
| KRL1056DZJQ1 | 1 BK RC 36W SSBLU/COPPER/SST | 1 | |
| KRSC323ZJI | 3 DRWR FLIP LID PRPL/COPPER | 1 | |
| KRSC323ZJO | 3 DRWR FLIP LID BERRY/COPPER | 1 | |
| KRSC323ZJQ | 3 DRWR FLIP LID SSBLU/COPPER | 1 | |
| KRSC323ZJR | 3 DRWR FLIP LID STMGRY/COPPER | 1 | |
| KRSC323ZJU | 3 DRWR FLIP LID COMGRN/COPPER | 1 | |
| KRSC323ZJV | 3 DRWR FLIP LID WHT/COPPER | 1 | |
| KRSC323ZKE | 3 DRWR FLIP LID FBLK/COPPER | 1 | |
| KRSC323ZKG | 3 DRWR FLIP LID PINK/COPPER | 1 | |
| KRSC323ZKH | 3 DRWR FLIP LID TEAL/COPPER | 1 | |
| KRSC343ZEU | 32IN SLDNG LID 6DR BLK/COPPER | 1 | |
| KRSC343ZJU | 32IN SLIDING LID COMGRN/COPPER | 1 | |
| KRSC343ZKC | 32IN SLIDING LID ASIL/COPPER | 1 | |
| KRSC343ZKE | 32IN SLIDING LID FBLK/COPPER | 1 | |
| KRSC343ZKH | 32IN SLIDING LID TEAL/COPPER | 1 | |
| KTL1023AZJQ | 3BK RC SSBLU/COPPER | 1 | |
| KTL1023AZJQ7 | 3BK RC SSBLU/COPPER/BLT | 1 | |
| KTL1023AZJU2 | 3BK RC COMGRN/COPPER/SSTLED | 1 | |
| KTL1023AZJU3 | 3BK RC COMGRN/COPPER/BLTLED | 1 | |
| KTL1023AZKH | 3BK RC TEAL/COPPER | 1 | |
| LSPENFLX-4/2M | Surface Probe, Copper Shaft, Shielded, Ø.072" tip x 4" long, 1MHz-3MHz, 7-PIN LEMO NORTEC | 1 | |
| MAB-CS | ROMPAS BLOCK, 7075-T6 or 7075-T73 ALUMINUM ½" (12.5mm) or 1" (25.4 mm) thick, 1" radius opposite 2" radius, with 5/64" diameter side drilled hole (3/4" deep flat bottom hole in 1" thick version). SPECIFICATION: ASTM E-164. (Includes wooden case). Note: | 1 | |
| ME65B01843-5 | OPPOSITE-3 ASSY | 1 | |
| MP305-40-FX | 30 DEG. 0.5 IN. ANGLE COPPER SHAFT PROBE | 1 | |
| MP305-60FX | 30 DEG. 0.5 IN. ANGLE COPPER SHAFT PROBE | 1 | |
| MP9003-50-FX | RIGHT ANGLE 0.03 IN. COPPER SHAFT PROBE | 1 | |
| MP905-80FX | FLEXIBLE COPPER SHAFT PROBE - SURFACE, 90 DEGREE, 500 KHZ FREQUENCY, NFE, ABSOLUTE, SHIELDED, 0.125 IN. (3.175 MM) DIAMETER, 8.0 IN. (203.2 MM) LONG, 0.50 IN. (12.7 MM) TIP LENGTH, (OLYMPUS OR EQUIVALENT) | 1 | |
| ODRRR35-24 | 24PCS-3.5IN DROPPOINT BLADE PK | 1 | |
| ONX580-PRO-V35B-PKG | ONX580-PRO-V35B-PKG;ONX-580 Advanced Copper V35B Package | 1 | |
| ONX580-V35B-PKG | ONX580-V35B-PKG;ONX-580 Copper+V35B Package | 1 | |
| PENFLX-1.75-1 | Special Surface Probe, copper flexshaft, .312 diameter handle, 1.75" long, 50-500KHz, Microdot | 1 | |
| PENFLX-10/2M | 1/8" Straight Surface Probe, 1-3MHz, Copper Flexshaft, 10" Length, Microdot | 1 | |
| PENFLX-13 | 1/8" Straight Surface Probe, 50-500KHZ, Copper Flexshaft, 13" Length, Microdot | 1 | |
| PENFLX-2.5-1 | Special Surface Probe, copper flexshaft, .312 diameter handle, 2.5" long, 50-500KHz, Microdot | 1 | |
| PENFLX-3 | Surface Probe, copper flexshaft, 3" length, 50-500KHz, Microdot | 1 | |
| PENFLX-4/2M | Straight Surface Probe, .125"Ø x 4" Long, Copper Shaft, 1-3MHZ, Microdot | 1 | |
| PENFLX-6/2M | Copper Surface Probe, Ø.125 x 6" Long, 1-3MHz, Microdot | 1 | |
| PENFLX-7.87/500K | FLEXIBLE COPPER SHAFT PROBE - SURFACE, STRAIGHT, 500 KHZ FREQUENCY (ABSOLUTE), SHIELDED, 0.125 IN. (3.175 MM) DIAMETER, 7.87 IN. (200.0 MM) LONG (ETHER NDE OR EQUIVALENT). | 1 | |
| PENFLX-9/2M | Straight Copper Surface Probe, .125"Ø x 9" Long, 1-3MHz, Microdot | 1 | |
| PENFLX35-6 | 30° Copper Surface Probe, .125"Ø x .5" Drop x 6" Long, 50-500KHz, Microdot | 1 | |
| PENFLX35-7 | 30° Copper Surface Probe, .125"Ø x .5" Drop x 7" Long, 50-500KHz, Microdot | 1 | |
| PENFLX43-12 | 45° Copper Surface Probe, .125"Ø x .3" Drop x 12" Long, 50-500KHz, Microdot | 1 | |
| PENFLX43-3/2M | 45° Copper Surface Probe, .125"Ø x .3" Drop x 3" Long, 1-3MHZ, Microdot | 1 | |
| PENFLX45-3 | 45° Copper Surface Probe, .125"Ø x .5" Drop x 3" Long, 50-500KHz, Microdot | 1 | |
| PENFLX45-5/2M | 45° Copper Surface Probe, .125"Ø x .5" Drop x 5" Long, 1-3MHZ, Microdot | 1 | |
| PENFLX45-6/2M | 45° Copper Surface Probe, .125"Ø x .5" Drop x 6" Long, 1-3MHz, Microdot | 1 | |
| PENFLX639-7.87/500K | FLEXIBLE COPPER SHAFT PROBE - SURFACE, 60 DEGREES, 500 KHZ FREQUENCY (ABSOLUTE), SHIELDED, 0.125 IN. (3.175 MM) DIAMETER, 7.87 IN. (200.0 MM) LONG, 0.39 IN. (10.0 MM) TIP LENGTH (ETHER NDE OR EQUIVALENT) | 1 | |
| PENFLX903-10 | 1/8" 90° 10" Surface Probe, .030" Drop, 50-500KHZ, Copper Flexshaft, Microdot | 1 | |
| PENFLX903-12 | 1/8" 90° 12" Surface Probe, .030" Drop, 50-500KHZ, Copper Flexshaft, Microdot | 1 | |
| PENFLX903-4 | 1/8" 90° 4" Surface Probe, .030" Drop, 50-500KHZ, Copper Flexshaft, Microdot | 1 | |
| PENFLX903-4/2M | 1/8" 90° 4" Surface Probe, .030" Drop, 1-3MHz, Copper Flexshaft, Microdot | 1 | |
| PENFLX903-5 | 90° Copper Surface Probe, .125"Ø x .030" Drop x 5" Long, 50-500KHz, Microdot | 1 | |
| PENFLX903-6 | 90° Copper Surface Probe, .125"Ø x .030" Drop x 6"Long, 50-500KHz, Microdot | 1 | |
| PENFLX903-7 | 1/8" 90° Surface Probe, 50-500KHz, Copper Flexshaft, .030" Drop, 7" Length, Microdot | 1 | |
| PENFLX903-8 | 1/8" 90° 8" Surface Probe, .030" Drop, 50-500KHZ, Copper Flexshaft, Microdot | 1 | |
| PENFLX903-9 | 1/8" 90° 9" Surface Probe, .030" Drop, 50-500KHZ, Copper Flexshaft, Microdot | 1 | |
| PENFLX91-6/2M | 90° Copper Surface Probe, .125" Dia x .100" Drop x 6"Long,1-3MHz, Microdot | 1 | |
| PENFLX9100-13 | 90° Surface Probe, .125" Dia x 1.00" Drop x 13" long, Copper Shaft, 50-500KHz, Microdot | 1 | |
| PENFLX915-2-1 | Special 90° Surface Probe, copper flexshaft, .312 diameter handle, 2" long, .15" Drop, 50-500KHz, Microdot | 1 | |
| PENFLX92-3 | Surface Probe, copper flexshaft, 90 degree, .2" drop, 3" length, Microdot | 1 | |
| PENFLX92-4/2M | 90° Copper Surface Probe, .125"Ø x .2" Drop x 4" Long, 1-3MHz, Microdot | 1 | |
| PENFLX92-6/2M | 90° Copper Surface Probe, .125"Ø x .2" Drop x 6" Long, 1-3MHz, Microdot | 1 | |
| PENFLX925-3 | 90° Copper Surface Probe, Shielded, Ø.125" tip x .25" drop x 3" long, 50-500KHz, Microdot | 1 | |
| PENFLX925-5/2M | 90° Copper Surface Probe, Shielded, Ø.125" tip x .25" drop x 5" long, 1-3MHZ, Microdot | 1 | |
| PENFLX925-6/2M | 90° Copper Surface Probe, Ø.125" x .25" drop x 6" long, 1-3 MHz, Microdot | 1 | |
| PENFLX925-7.87/500K | FLEXIBLE COPPER SHAFT PROBE - SURFACE, 90 DEGREES, 500 KHZ FREQUENCY (ABSOLUTE), SHIELDED, 0.125 IN. (3.175 MM) DIAMETER, 7.87 IN. (200.0 MM) LONG, 0.25 IN. (6.35 MM) TIP LENGTH (ETHER NDE OR EQUIVALENT) | 1 | |
| PENFLX93-12 | 90° Surface Probe, .125" Dia x .300" Drop x 12"Long, Copper Shaft, 50-500KHz, Microdot | 1 | |
| PENFLX93-2-1 | Special 90° Surface Probe, copper flexshaft, .312 diameter handle, 2" long, .3" Drop, 50-500KHz, Microdot | 1 | |
| PENFLX93-6 | 90° Surface Probe, .125" Dia x .300" Drop x 6"Long, Copper Shaft, 50-500KHz, Microdot | 1 | |
| PENFLX95-3/2M | 90° Copper Surface Probe, Shielded, Ø.125" tip x .5" drop x 3" long, 1-3Mhz, Microdot | 1 | |
| PENFLX95-4/2M | 90° Copper Surface Probe, .125"Ø x .5" Drop x 4" Long, 1-3MHz, Microdot | 1 | |
| PENFLX95-5/2M | 90° Copper Surface Probe, .125"Ø x .5" Drop x 5" Length, 1-3MHz, Microdot | 1 | |
| PENFLX95-6/2M | 90° Copper Surface Probe, .125"Ø x .5" Drop x 6" Long, 1-3MHz, Microdot | 1 | |
| PENFLX95-8 | FLEXIBLE COPPER SHAFT PROBE - SURFACE, 90 DEGREE, 500 KHZ FREQUENCY, NFE, ABSOLUTE, SHIELDED, 0.125 IN. (3.175 MM) DIAMETER, 8.0 IN. (203.2 MM) LONG, 0.50 IN. (12.7 MM) TIP LENGTH, (OLYMPUS OR EQUIVALENT) | 1 | |
| PENFLX97-4/2M | 1/8" 90° Surface Probe, 50-500KHZ, Copper Flexshaft 4" long 1-3MHZ, Microdot | 1 | |
| PENFLX97-9/2M | 90° Copper Surface Probe, .125"Ø x .7" Drop x 9" Long, 1-3MHz, Microdot | 1 | |
| PENFLX975-6/2M | 1/8" 90° Surface Probe, 1-3Mhz, Copper Flexshaft, 6" Length, 0.75" Drop, Microdot | 1 | |
| PENUFLX-6/2M | 1/8" Straight Surface Probe, 1-3MHz, Unshielded, Flex copper shaft, 6" long | 1 | |
| PENUFLX95-6/2M | 90° Surface Probe, .125"Ø Copper Shaft .5" Drop, 1-3MHz Unshielded, 6" long | 1 | |
| PN36281 | 3-INCH, STRAIGHT, GLASS TUBE EYEDROPPER | 1 | |
| PV038-01 | FLEXIBLE COPPER SHAFT PROBE - SURFACE, STRAIGHT, 500 KHZ FREQUENCY (ABSOLUTE), SHIELDED, 0.125 IN. (3.175 MM) DIAMETER, 7.87 IN. (200.0 MM) LONG (ETHER NDE OR EQUIVALENT). | 1 | |
| PV038-02 | FLEXIBLE COPPER SHAFT PROBE - SURFACE, 90 DEGREES, 500 KHZ FREQUENCY (ABSOLUTE), SHIELDED, 0.125 IN. (3.175 MM) DIAMETER, 7.87 IN. (200.0 MM) LONG, 0.25 IN. (6.35 MM) TIP LENGTH (ETHER NDE OR EQUIVALENT) | 1 | |
| PV038-03 | FLEXIBLE COPPER SHAFT PROBE - SURFACE, 60 DEGREES, 500 KHZ FREQUENCY (ABSOLUTE), SHIELDED, 0.125 IN. (3.175 MM) DIAMETER, 7.87 IN. (200.0 MM) LONG, 0.39 IN. (10.0 MM) TIP LENGTH (ETHER NDE OR EQUIVALENT) | 1 | |
| RH110-C20C30-4340 | 11 Holes, Diameters: 1/8,5/32, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4 & 7/8", .030" Corner and .020" Corner (opposite side),4340 Steel, .250" Thick, Per 767, 51-00-16 & -17 | 1 | |
| RH110-C20C30-7075T6 | 11 Holes, Diameters: 1/8,5/32, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4 & 7/8", .030" Corner and .020" Corner (opposite side), 7075-T6 Aluminum, .250" Thick, Per 767, 51-00-16 & -17 | 1 | |
| RH73-C20C30-4340 | Multi Hole Reference Standard,.188, .250, .313, .375, .438, .500, .875", .030" Corner and .020" Corner (opposite side), 4340 Steel | 1 | |
| RH73-C20C30-7075T6 | Multi Hole Reference Standard,.188, .250, .313, .375, .438, .500, .875", .030" Corner and .020" Corner (opposite side), 7075-T6 Aluminum | 1 | |
| S10-70380A | TRM BRSHD COPPER EXWIDE 35.52" | 1 | |
| SCTPS-AB-CU | SCTPS-AB-CU;Smartclass TPS VDSL/Copper Mainframe ANX A/B - VDSL 30a | 1 | |
| SDP.3-2K-7FBC | Reflection Spot Probe w/ copper flex shaft, .3"OD x .5" drop x 7" long, 2-20KHz, Triax Connector | 1 | |
| SK-2043-S | Dill Air Controls SK-2043-S Copper 18 NPT Female - 5,000 PSI Straight High-Pressure Hose Coupling | 2 | |
| SK-2043C | Dill Air Controls SK-2043-C Copper 18 NPT Female - 5,000 PSI Gooseneck High-Pressure Hose Coupling | 11 | |
| SLS38SO | STEEL LINE STOPPER 3/8IN | 1 | |
| SPENFLX-3 | .072" Tip Surface Probe, 50-500KHZ, Copper Flexshaft, 3" Length., Microdot | 1 | |
| SPENFLX32-4 | .072" Dia. Tip, Shielded, 30° Surface Probe, .2 Drop 4" length, Copper FLX 50-500KHz, Microdot | 1 | |
| SPENFLX35-4.5 | .072" Dia. Tip, Shielded, 30° .5 Drop Surface Probe, 4.5" length, Copper FLX 50-500KHz, Microdot | 1 | |
| SPENFLX35-6 | .072" Dia. Tip, Shielded, 30° .5 Drop 6" Copper Shaft Surface Probe, 50-500KHz, Microdot | 1 | |
| SPENFLX91-6/2M | .072" Dia. Tip, Copper Flex Shaft, Shielded, 90° .1 Drop Surface Probe, 6" long, 1-3Mhz | 1 | |
| SPENFLX92-3 | 90° Copper Surface Probe, .072"Ø x .200" Drop x 3"Long, .3/8" Dia. Handle, 50-500KHz | 1 | |
| SPENFLX92-3/500K | 90° Copper Surface Probe, .072"Ø x .200" Drop x 3"Long, .3/8" Dia. Handle, 200K-1MHz, Microdot | 1 | |
| SPENFLX92-4P | 90° Copper Surface Probe, .072"Ø x .200" Drop x 3"Long, 50-500KHz, 3/8" Handle, 120uH coil, Microdot | 1 | |
| SPENFLX92-6/2M | 90° Copper Surface Probe, .072"Ø x .200" Drop x 6"Long, 1-3MHz, Microdot | 1 | |
| SPTech SPT PPM-9.31n-7 | 90° Copper Pencil Probe, Shielded, Ø.125" tip x .31" drop x 7" long, 50-500KHz, Microdot | 1 | |
| TAOCG256SMLC73K | TAOCG256SMLC73K;Optical Aggregator nTAP-2 Copper Outputs-256MB-9um SM-LC-70/30 | 1 | |
| TAOCG512M6LC73K | TAOCG512M6LC73K;Optical Aggregator nTAP-2 Copper Outputs-512MB-62.5um MM-LC-70/30 | 1 | |
| TCRM-K | TCRM-K;19 in. 1U Rack Mount Panel for up to 3 Copper or Optical nTAPs | 1 | |
| TEK-3050 | REFL surface probe 25-100KHz copper probe flex shaft .187 dia, tip .310 7 in long OAL | 1 | |
| TEK-6034CB | Flat Standard with Radius Notch, Copper Bronze per ABS PT3 32-42-05 PG15 PROC 1 FIG 11 | 1 | |
| THOR-3 | HAMMER THOR NO3 COPPER/HIDE FACES | 1 | |
| TOCG-M6-LC-73-K | TOCG-M6-LC-73-K;Optical nTAP with Copper Full-Duplex Output-62.5um-MM-LC-70/30 Split Ratio | 1 | |
| TOCG-SM-LC-73-K | TOCG-SM-LC-73-K;Optical nTAP with Copper Full-Duplex Output-9um-SM-LC-70/30 Split Ratio | 1 | |
| TPENFLX-10/2M | Straight Surface Probe, .125"Ø Copper Shaft x 10"Long, 1-3MHZ, Triax connector | 1 | |
| TPENFLX-14/2M | Straight Surface Probe, .125"Ø Copper Shaft x 14"Long, 1-3MHz, Triax connector | 1 | |
| TPENFLX45-4/2M | 45° Surface Probe, .125"Ø Copper Shaft x .5" Drop x 4" Long, 1-3MHz, Triax Connector | 1 | |
| TPENFLX45-6/2M | 45° Surface Probe, .125"Ø Copper Shaft x .5" Drop x 6" Long, 1-3 MHz, Triax Connector | 1 | |
| TPENFLX903-10 | 90° Surface Probe, .125"Ø Copper Shaft x .030" Drop x 10" Long, 50-500KHz, Triax Connector | 1 | |
| TPENFLX903-4 | 90° Surface Probe, .125"Ø Copper Shaft x .030" Drop x 4" Long, 50-500KHz, Triax Connector | 1 | |
| TPENFLX903-5 | 90° Surface Probe, .125"Ø Copper Shaft x .030" Drop x 5" Long, 50-500KHz, Triax Connector | 1 | |
| TPENFLX903-5/200K-1M | 90° SURFACE PROBE, .125"Ø COPPER SHAFT X .030" DROP X 5" LONG, 200KHZ-1MHZ, TRIAX CONNECTOR | 1 | |
| TPENFLX903-5/500K | 90° Surface Probe, .125"Ø Copper Shaft x .030" Drop x 5" Long, 200K-1MHz, Triax Connector | 1 | |
| TPENFLX903-6 | 90° Surface Probe, .125"Ø Copper Shaft x .030" Drop x 6" Long, 50-500KHz, Triax Connector | 1 | |
| TPENFLX903-7 | 90° Surface Probe, .125"Ø Copper Shaft x .030" Drop x 7" Long, 50-500KHz, Triax Connector | 2 | |
| TPENFLX903-8 | 90° Surface Probe, .125"Ø Copper Shaft x .030" Drop x 8" Long, 50-500KHz, Triax Connector | 1 | |
| TPENFLX903-9 | 90° Surface Probe, .125"Ø Copper Shaft x .030" Drop x 9" Long, 50-500KHz, Triax Connector | 1 | |
| TPENFLX91-6/2M | 90° Surface Probe, .125"Ø Copper Shaft x .1" Drop x 6" Long, 1-3MHz, Triax Connector | 1 | |
| TPENFLX91-8/2M | 90° Surface Probe, .125"Ø Copper Shaft x .1" Drop x 8" Long, 1-3MHz, Triax Connector | 1 | |
| TPENFLX925-6/2M | 90° Surface Probe, .125"Ø Copper Shaft x .25" Drop x 6" Long, 1-3MHz, Triax Connector | 1 | |
| TPENFLX925-8/2M | 90° Surface Probe, .125"Ø Copper Shaft x .25" Drop x 8" Long, 1-3MHz, Triax Connector | 1 | |
| TPENFLX93-11 | 90° Surface Probe, .125"Ø Copper Shaft x .3" Drop x 11" Long, 50-500KHz, Triax Connector | 1 | |
| TPENFLX93-5 | 90° Surface Probe, .125"Ø Copper Shaft x .3" Drop x 5" Long, 50-500KHz, Triax Connector | 1 | |
| TPENFLX9375-6 | 90° Surface Probe, .125"Ø Copper Shaft x .375" Drop x 6" Long, 50-500KHz, Triax Connector | 1 | |
| TPENFLX95-10/2M | 90° Surface Probe, .125"Ø Copper Shaft x .5" Drop x 10" Long, 1-3MHz, Triax Connector | 1 | |
| TPENFLX95-3 | 90° Surface Probe, .125"Ø Copper Shaft x .5" Drop x 3" Long, 50-500KHz, Triax Connector | 1 | |
| TPENFLX95-6/2M | 90° Surface Probe, .125"Ø Copper Shaft x .5" Drop x 6" Long, 1-3 MHz Triax Connector | 1 | |
| TPENUFLX903-4/2M | 90° Surface Probe, .125"Ø Copper Shaft x .030" Drop x 4"Long, 1-3MHz, Unshielded, Triax connector | 1 | |
| TPENUFLX903-6/500K | 90° Surface Probe, .125"Ø Copper Shaft x .030" Drop x 6"Long, 200KHz-1MHz, Unshielded, Triax connector | 1 | |
| TPENUFLX903-8 | 90° Surface Probe, .125"Ø Copper Shaft x .030" Drop x 8"Long, 50-500KHz, Unshielded, Triax connector | 1 | |
| TPENUFLX93-6/500K | 90° Surface Probe, .125"Ø Copper Shaft x .3" Drop x 6"Long, 200KHz-1MHz, Unshielded, Triax connector | 1 | |
| TPNRFLX9375-6B/10K | 90° Low Frequency Ø .125 Copper Surface Probe, Reflection, Ø.187" tip x .375" drop x 6" long, 5-25KHz, 15° Bend, Triax Connector | 1 | |
| TSPENFLX903-7 | 90° Copper Surface Probe, .072"Ø x .030" Drop x 7"Long, 50-500KHz, Triax Connector | 1 | |
| TT-HST3000COPPER-SP | TT-HST3000COPPER-SP;Service Copper Testing with the HST-3000C Self-Paced | 1 | |
| U8620059 | 30 DEG. 0.5 IN. ANGLE COPPER SHAFT PROBE | 1 | |
| U8620252 | RIGHT ANGLE 0.03 IN. COPPER SHAFT PROBE | 1 | |
| V2-AL | MINI ANGLE BEAM ALUM V2 BLOCK ½" (12.5mm) or 1" (25.4 mm) thick, 1" radius opposite 2" radius, with 5/64" diameter side drilled hole (3/4" deep flat bottom hole in 1" thick version). Aluminum 7075-T6. Includes form fitted case. | 1 | |
| V2-CS | MINI ANGLE BEAM BLOCK CS V2 BLOCK.½" (12.5mm) or 1" (25.4 mm) thick, 1" radius opposite 2" radius, with 5/64" diameter side drilled hole (3/4" deep flat bottom hole in 1" thick version).1018 Carbon Steel with form fitted case | 1 | |
| V2-SS | MINI ANGLE BEAM BLOCK CS V2 BLOCK.½" (12.5mm) or 1" (25.4 mm) thick, 1" radius opposite 2" radius, with 5/64" diameter side drilled hole (3/4" deep flat bottom hole in 1" thick version). ..304 Stainless Steel with case | 1 | |
| VP6485 | KILLARK VP6485 PIN AND SLEEVE PLUG, 3 WIRE, 4 POLE, 60 AMP, 600V, COPPER-FREE ALUMINUM | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
