| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| AT1100-42 | OIL SEAL | 1 | |
| AT218-34 | OIL SEAL | 1 | |
| AT218-38 | OIL SEAL | 1 | |
| AT350-28 | OIL SEAL | 1 | |
| AT351-16 | OIL SEAL | 1 | |
| AT355-8 | OIL SEAL | 1 | |
| AT360-20 | OIL SEAL | 1 | |
| AT380-26 | OIL SEAL | 1 | |
| AT460-13H | OIL SEAL | 1 | |
| AT531-19 | OIL SEAL | 1 | |
| AT760-43 | OIL SEAL | 1 | |
| CTTP861-170-10 | OIL SEAL | 1 | |
| IM1800-25 | OIL SEAL | 1 | |
| IM1800-46 | OIL SEAL | 1 | |
| MG1200-25 | OIL SEAL | 1 | |
| MG1200-33 | OIL SEAL | 1 | |
| PT2500-1 | OIL SEAL | 1 | |
| PT2500-23 | OIL SEAL | 1 | |
| PTRS1000-27 | OIL SEAL | 1 | |
| PWC30075 | OIL SEAL | 11 | |
| PWC37434 | OIL SEAL | 9 | |
| SP505185 | OIL SEAL | 1 | |
| SP505234 | OIL SEAL | 1 | |
| SP505249 | OIL SEAL | 1 | |
| SP505272 | OIL SEAL | 1 | |
| SP505560 | OIL SEAL | 1 | |
| SP510181 | OIL SEAL | 1 | |
| SP510204 | OIL SEAL | 1 | |
| SP510222 | OIL SEAL | 1 | |
| SP510236 | OIL SEAL | 1 | |
| SP66631 | OIL SEAL | 1 | |
| SP66664 | OIL SEAL | 1 | |
| SP66677 | OIL SEAL | 1 | |
| SP66710 | OIL SEAL | 1 | |
| SP66726 | OIL SEAL | 1 | |
| SP67164 | OIL SEAL | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 00-07-05-01 | CRJ OIL SEAL CONNECTOR | 1 | |
| 10-400554 | SEAL COIL | 1 | |
| 10C1095GP01 | PROTECTOR, AFT - CENTER VENT TUBE - OIL SEAL (SEAL PROTECTOR) | 1 | |
| 10C1095P01 | PROTECTOR, AFT - CENTER VENT TUBE - OIL SEAL | 1 | |
| 10C1096 | PROTECTOR - NO. 4 BRG OIL SEAL | 1 | |
| 10C1096P01 | PROTECTOR - NO. 4 BEARING OIL SEAL (BEARING OIL SEAL PROTECTOR) | 1 | |
| 10C1400 | GAGE - NO 4 BEARING TO FWD ROTATING OIL SEAL | 1 | |
| 10C1400P01 | GAGE, NO. 4 BEARING TO FORWARD, ROTATING OIL SEAL, | 1 | |
| 10C2074 | PULLER - SEAL AFT AIR AND OIL | 1 | |
| 11C3067 | FXTR - RTNR-NO 4 BRG INNER RACE/OIL SCOOP/ROTATING SEAL/FWD SEAL | 1 | |
| 11C3328 | TOOL SET, INSTALL/REMOVE-NO 5 BRG AFT SEAL & AIR OIL EXT | 1 | |
| 11C4215 | FIXTURE - RESTRAINING SEAL AIR/OIL ROT NO 4 BRG | 1 | |
| 123814 | SEAL TOILET DRAIN CHALLENGER | 5 | |
| 17240-012-000 | OIL SEAL KIT | 1 | |
| 1C5691 | PULLER NO 6 BEARING INR RING & ROTATING OIL SEAL | 1 | |
| 1C5691 REV P | PULLER NO. 6 BEARING INNER RING & ROTATING OIL SEAL | 1 | |
| 1C5691G04 | Puller, No. 6R Bearing Inner Race and Rotating Oil Seal | 1 | |
| 2308 | DRIVE OIL SEAL PULLER - VA-28 THREAD, TEE | 3 | |
| 2464M88P01 | SEAL, ROTATING, AIR AND OIL, NO. 4 BEARING, FORWAR | 1 | |
| 269A9215 | Thimble Oil Seal | 1 | |
| 287071-1 | DRIVER,OIL PUMP SEAL INST | 1 | |
| 296937-1 | PULLER - SEAL, OIL PUMP SHAFT - GTCP85-129 ONLY - 737-100/200/300/400/500; B734F; ATA 49-00-00 | 1 | |
| 2C14062G01 | PULLER, NO.4B FORWARD INNER RACE AND ROTATING AIR/OIL SEAL | 1 | |
| 2C14648 | PULLER, NO. 1 BRG. & AIR/OIL SEAL | 1 | |
| 2C14648 REV G | PULLER, NO. 1 BRG. & AIR/OIL SEAL | 1 | |
| 2C14648G01 | PULLER , NO.1 BEARING AND AIR/OIL SEAL | 2 | |
| 2C14648P02 | PULLER #1 BEARING AND AIR-OIL SEAL | 1 | |
| 2C14648P03 | PULLER # 1 BEARING AND AIR-OIL SEAL | 1 | |
| 2C14648P05 | PULLER # 1 BEARING AND AIR-OIL SEAL | 1 | |
| 2C14648P06 | PULLER # 1 BEARING AND AIR-OIL SEAL | 1 | |
| 2C14669G01 | PULLER, NO. 4R BEARING INNER RACE, ROTATING AIR, OIL SEAL, AND NO. 4B BEARING | 3 | |
| 2C14669G02 | PULLER, NO. 4R BEARING INNER RACE, ROTATING AIR, OIL SEAL, AND NO. 4B BEARING FWD RACE ( PULLER ) | 1 | |
| 2C14740 | PULLER, STATION AIR/OIL SEAL - NO. 1 BEARING | 1 | |
| 2C14740 REV C | PULLER, STATION AIR/OIL SEAL - NO. 1 BEARING | 1 | |
| 2C14740G01 | PULLER, STATIONARY AIROIL SEAL-#1 BEARING | 2 | |
| 2C18118 | FIXTURE, GAGE GO- STATIONARY AIR/OIL SEAL, NO 4 BRG | 1 | |
| 2C6009 | PULLER, ADAPTER- NO 4 BRG ROTATING AIR & OIL SEAL | 2 | |
| 2C6009G01 | NO. 4 BRG AIR/OIL SEAL PULLER ADAPTER | 1 | |
| 2C6120 | PUSHER, INNER RACE, SPACER, AIR & OIL SEAL | 1 | |
| 2C6120 REV D | PUSHER, INNER RACE, SPACER, AIR & OIL SEAL | 1 | |
| 2C6120G02 | PUSHER INNER RACE SPACER AIROIL SEAL #1 BEARING | 2 | |
| 2C6120G02TK | PUSHER, INNER RACE-SPACER-AIR AND OIL SEAL-NO.1 BRG. | 1 | |
| 2C6262 | PULLER,INNER RACE,SPACER,AIR&OIL SEAL #1 BEARING | 1 | |
| 2C6262G04 | PULLER INNER RACES, SPACER, AIR AND OIL SEAL - NO. 1 BEARING | 1 | |
| 2C6262P05 | LEG PULLER AIR OIL SEAL | 1 | |
| 2C6615G02 | INSTALLATION TOOL ACCY GEARBOX OIL SEAL | 2 | |
| 2C6998G06 | REMOVAL TOOL AACY GEARBOX OIL SEAL | 3 | |
| 2C8040G01TK | FIXTURE CONCENTRICITY-NO.3 BRG. STATIONARY AIR &OIL SEALS | 1 | |
| 2C8040JW97247 | CONCENTRICITY #3 BEARING STATIONARY AIR & OIL SEAL | 1 | |
| 2C81168P02 | PUSHER, NO. 4 FWD OIL SEAL | 1 | |
| 2C81169G02 | PULLER, NO. 4 OIL SEAL AND INNER RACE | 1 | |
| 2C81413 | PULLER - #4 OIL SEAL, HPTR | 1 | |
| 2C81413G02 | PULLER, HPT ROTOR NO. 4 OIL ROTATING SEAL | 1 | |
| 2C81703P01 | ENGINE GROUND OIL SEAL EQUIPMENT | 1 | |
| 3114352-01 | OIL SEAL RETAINING RING HALF UPER | 1 | |
| 3114353-01 | OIL SEAL RETAINING RING HALF LOWER | 1 | |
| 3T6500X01611W142H | TAIL ROTOR GEAR BOX OUTPUT OIL SEAL REMOVAL | 1 | |
| 3T6522A00231W142AK | TAIL ROTOR GEAR BOX/MAST OUTPUT OIL SEAL ASSEMBLY PRESS TOOL | 1 | |
| 3T6522A00231W142S | TAIL ROTOR GEAR BOX/MAST OUTPUT OIL SEAL ASSEMBLY SUPPORT TOOL | 1 | |
| 472048A-WAU | CRANKSHAFT OIL SEAL DRIVER | 1 | |
| 5209 | CRANKSHAFT NOSE OIL SEAL INSTALLER TOOL | 1 | |
| 876518 | INSERTION JIG FOR OIL SEAL 40*55*7 GEAR BOX COVER | 1 | |
| 877594 | PRESS-IN JIG FOR ROLLER BEARING 25*52*15 AND OIL SEAL 30*52*7 , FOR F2 | 1 | |
| 877615 | EXTRACTOR ASSY FOR ROLLER BEARING, OIL SEAL | 1 | |
| 4950715 | SEAL, OIL | 1 | |
| 67259-187-101 | MANDREL FOR FITTING MOUNTING PLATE OIL SEAL TO ROTOR SHAFT | 1 | |
| 6796203 | OIL SEAL PULLER - PLATES, ACCESSORY MAIN | 2 | |
| 6796233 | SUPPORT EXTENSION SHAFT OIL SEAL | 1 | |
| 6796234 | DRIFT - EXTENSION SHAFT OIL SEAL | 1 | |
| 6796348 | PULLER - TACH GEN DR OIL SEAL | 1 | |
| 6796349 | PULLER - FUEL PUMP DRIVE OIL SEAL | 1 | |
| 6796354 | EXPANDER, OIL SEAL, TACHOMETER DRIVE SHAFT | 2 | |
| 6796355 | EXPANDER - ACCESSORY DRIVE SHAFT OIL SEAL | 2 | |
| 6796460 | PULLER - TACHOMETER GENERATOR DRIVE OIL SEAL | 2 | |
| 6796461 | Puller Fuel Pump Drive Oil Seal | 3 | |
| 6796541 | KIT REPLACEMENT ACCESSORY GEARBOX OIL SEAL | 2 | |
| 6796588 | EXPANDER, SPEED SENSITIVE VALVE DRIVE SHAFT ASSEMBLY OIL SEAL | 2 | |
| 6796918 | DRIFT INSTALLATION TURBINE AND EXHAUST COLLECTOR SUPPORT OIL BELLOW SEAL | 2 | |
| 6796941 | KIT REPLACEMENT ACCESSORY GEARBOX OIL SEAL | 4 | |
| 6797234 | EXPANDER, OIL SEAL, ACCESSORY DRIVE | 2 | |
| 6797346 | PULLER, OIL SEAL, FUEL PUMP DRIVE | 1 | |
| 6797574 | PUSHER, TACHOMETER DRIVE OIL SEAL | 2 | |
| 6797575 | PULLER, TACH DRIVE OIL SEAL | 1 | |
| 6798804 | PULLER, TACHOMETER DRIVE OIL SEAL | 2 | |
| 6798928 | Protector – Power Turbine Oil Bellows Seal Puller | 3 | |
| 6799596 | SHAFT GEAR OIL SEAL FIXTURE - INSTALLATION, SPEED | 2 | |
| 6872176 | PULLER SEAL ASSEMBLY OIL BELLOWS | 2 | |
| 6893739 | PULLER--COMPRESSOR REAR BEARING, OIL SLINGER AND SEAL | 2 | |
| 23068589 | Plate – Oil Test No. 6 Seal | 1 | |
| 73-0067-02 | ENGINE GROUND OIL SEAL EQUIPMENT | 1 | |
| 85643011P01 | PLUG， PULLER - AFT ROTATING AIR/OIL SEAL | 1 | |
| 856A1171 | FIXTURE, PRESS TEST NO 3 BRG AFT AIR/OIL SEAL | 1 | |
| 856A1171G03 | FIXTURE, PRESS TEST, #3 BRG AFT AIR/OIL SEAL | 1 | |
| 856A1171G06 | FIXTURE, PRESS TEST, #3 BRG AFT AIR/OIL SEAL | 2 | |
| 856A1216 | PULLER-NO.4 BRG. OUTER RACE, OIL SEAL & AIR DUCT | 2 | |
| 856A1216 G01 | Puller ‐ No. 4 Brg Outer Race Oil Seal & Air Duct | 3 | |
| 856A1216 G02 | PULLER - NO. 4 BEARING OUTER RACE, OIL SEAL AND AI | 12 | |
| 856A1216 REV C | PULLER-NO.4 BRG. OUTER RACE, OIL SEAL & AIR DUCT | 1 | |
| 856A1216G01 | PULLER-NO4 BEARING OUTER RACE, OIL SEAL & AIR DUCT | 3 | |
| 856A1216G02 | Puller - No. 4 Bearing Outer Race, Oil Seal and Air Duct (puller) | 12 | |
| 856A1216G03 | PULLER - #4 BRG OUTER RACE - OIL SEAL & AIR DUCT | 1 | |
| 856A2352G01 | PULLER AFT OIL SEAL | 2 | |
| 856A2372G01 | PROTECTOR, REAR INNER OIL SEAL | 2 | |
| 856A2375 | PULLER, HYDRAULIC-REAR ROTATING AIR/OIL SEAL | 1 | |
| 856A2375G01 | PULLER, HYDRAULIC - REAR ROTATING AIR/OIL SEAL (PULLER) | 1 | |
| 856A2375G02 | PULLER HYDRULIC REAR ROTATING AIR/OIL SEAL | 1 | |
| 856A2759G03 | AIR/OIL SEAL PULLER | 4 | |
| 856A2764G01 | HEATER - LPT FWD ROTATING OIL SEAL | 1 | |
| 856A2764G02 | HEATER - LPT FWD ROTATING OIL SEAL | 1 | |
| 856A2764G03 | HEATER - LPT FWD ROTATING OIL SEAL | 1 | |
| 856A2764G04 | HEATER - LPT FWD ROTATING OIL SEAL | 1 | |
| 856A2764G05 | HEATER - LPT FWD ROTATING OIL SEAL | 3 | |
| 856A2764G06 | HEATER - LPT FWD ROTATING OIL SEAL | 2 | |
| 856A2789G01 | RING, CENTERING - REAR ROTATING AIR AND OIL SEALS ON LPT SHAFT (CENTERING RING) | 1 | |
| 856A2789G02 | Ring, Centering - Rear Rotating Air and Oil Seals on LPT Shaft (centering ring) | 4 | |
| 856A2912G02 | REMOVAL/INSTALLATION, SEALOIL AND MA | 3 | |
| 856A2943 | SLEEVE, PROTECT - REAR INNER ROT AIR/OIL SEAL | 1 | |
| 856A2943G01 | SLEEVE, PROTECTION-REAR INNER ROTATING AIR/OIL SEAL | 9 | |
| 856A2943G03 | SLEEVE, PROTECT - REAR INNER ROT AIR/OIL SEAL | 1 | |
| 856A2961 | INSTALL/REMOVE TOOL SEAL OIL & AGNETIC SEALAGB | 1 | |
| 856A2971 | REM/INST SEALOIL AND MAGNETIC SEAL AGB INST/DEMONT | 1 | |
| 856A3009P01 | WRENCH - #2 BRG AIR/OIL SEAL RETAINER | 1 | |
| 856A3011 | PLUG, PULLER - AFT ROTATING AIR/OIL SEAL (PULLER PLUG) | 1 | |
| 856A3011 P01 | Plug Puller ‐ Aft Rotating Air/Oil Seal | 10 | |
| 856A3011P01 | Plug, Puller - Aft Rotating Air/Oil Seal (puller plug) | 10 | |
| 856A3062 | PULLER REAR ROTATING AIR/OIL SEAL | 1 | |
| 856A3062G02 | PULLER REAR ROTATING AIR/OIL SEAL | 6 | |
| 856A3062G03 | PULLER REAR ROTATING AIR/OIL SEAL | 1 | |
| 856A3272 | PULL #4 BRG ROTATING OIL SEAL | 1 | |
| 856A3272 G01 | Puller ‐ No. 4 Bearing Forward Rotating Oil Seal | 5 | |
| 856A3272G01 | PULL #4 BRG ROTATING OIL SEAL | 5 | |
| 856A3330 | FITTING SEAL - AGB/TGB OIL NIPPLES | 1 | |
| 856A3330G01 | SEAL FITTING AGB TGB OIL NIPPLES & TUBES | 12 | |
| 856A3330P02 | TOOL SEAL FITTING AGB&TGB OIL | 2 | |
| 856A3571G02 | FORWARD ROTATING AIR/OIL SEAL TORQUE TOOL | 13 | |
| 856A3583G01 | LEAK TEST OIL SEALS | 3 | |
| 856A4026G02 | FIXTURE MACHINING NO. 3 BEARING FORWARD STATIONARY OIL SEAL | 1 | |
| 856A4027 | FIXT HOLDING BRG AFT OILSEAL | 1 | |
| 856AI2I6 | PULLER-NO.4 BRG. OUTER RACE, OIL SEAL & AIR DUCT | 1 | |
| 8818171000 | OIL AND GAS SEPARATOR SEALING RING REMOVAL TOOL | 1 | |
| 8818836200 | OIL-GAS SEPARATOR SEALING PULLER | 1 | |
| 8819952000 | OIL-GAS SEPARATOR SEALING PULLER | 2 | |
| 956A1031 | FIXTURE - RTNR-NO 4 BRG INNER RACE/OIL SCOOP/ROTATING SEAL/FWD SEAL | 1 | |
| 956A1037 | FIXTURE - RESTRAINING - FWD ROTATING OIL SEAL NO. 4 BEARING | 1 | |
| 956A1039 | PULLER - ASSY - NO. 4 BRG FWD ROTATING OIL SEAL | 1 | |
| 956A1064 | FIXTURE - INSTALL - STATIONARY OIL SEAL - FWD | 1 | |
| 956A1602P01 | FUEL SYSTEM SEAL OIL PACKAGE | 5 | |
| 956A1805 | FIXTURE - RESTRAIN - SEAL ROTATING - OIL | 1 | |
| 956A1805G02 | ROTATING OIL SEAL RESTRAIN FIXTURE | 1 | |
| 956A3031 | FIXTURE - RTNR-NO 4 BRG INNER RACE/OIL SCOOP/ROTATING SEAL/FWD SEAL | 1 | |
| 956A3039 | PULLER - ASSEMBLY-NO. 4 BEARING FWD ROTATING OIL SEAL | 1 | |
| 956A3805 | FIXTURE - RESTRAIN - AFT ROTATING OIL SEAL - NO 4 BRG | 1 | |
| 9C3002 | TOOL SET, INSTALL/REMOVE-NO 5 BRG AFT SEAL & AIR/OIL EXT | 1 | |
| 9C3167 | PULLER-#4 BRG AFT ROTATING OIL SEAL | 1 | |
| AGE70660 | APS1000C12 APU GEARBOX OIL SEAL TOOL | 2 | |
| AGE70661 | APS1000C12 APU GEARBOX OIL SEAL TOOL | 2 | |
| AGE70661-IAS | APS1000C12 APU GEARBOX OIL SEAL TOOL | 1 | |
| AID-00629 | OIL SEAL INSTALLATION TOOL | 1 | |
| AT1100A72 | HOUSING OIL SEAL | 1 | |
| AT365-30 | OIL SEAL. | 1 | |
| AT380-25 | ROTOR OIL SEAL | 1 | |
| AT380A-25 | ROTOR OIL SEAL | 1 | |
| AT560-32 | OIL SEAL. | 1 | |
| CU-3904 | PART NO CU-3904 JONT OIL PR TXR SEAL | 1 | |
| D630P8001951 | OIL SEAL CHANGE TOOL | 1 | |
| GS14616-1 | INSERTER, OIL SEAL PLATE 54H60 | 3 | |
| HC130H0209-000 | Extractor - starter shaft oil seal | 2 | |
| HS7588 | INSERTER - OIL SEAL PLATEQ | 1 | |
| HU44597 | TOOL OIL SEAL REMOVAL | 1 | |
| HU81215-1 | Oil seal joint RIG-INHIBITING | 4 | |
| IAE1F10067 | PULLER-DEOILER SEAL. | 15 | |
| LTCT100 | INSTALLING TOOL OIL SEAL | 1 | |
| LTCT1152 | INSTALLATION TOOL, OIL SEAL | 1 | |
| ME11B34 | NEEDLE BEARING w/OIL SEAL | 1 | |
| NS09IND01034 | OTC 6591 OIL SEAL PROTECTOR | 1 | |
| OF25-050 | OIL SEALING PLATE | 1 | |
| PMXOSE100 | OIL SEAL EXTRACTOR ADAPTOR | 1 | |
| PMXPHO100K | OIL SEAL EXTRACTOR HAMMER KIT | 1 | |
| PWA106411 | PULLER-DEOILER SEAL ASSY | 1 | |
| PWA106412 | PULLER-DEOILER SEAL ASSY | 1 | |
| PWA107032 | ADAPTER-MAIN GEARBOX VFG DRIVE OIL SEAL | 1 | |
| PWA80048 | PULLER KNOCKER DEOILER SEAL HOUSING | 2 | |
| PWA80168 | BASE GEARBOX CARBON SEAL RETAINER DEOILER | 1 | |
| PWA80169 | DRIFT GEARBOX CARBON SEAL REMOVAL DEOILER | 1 | |
| PWA80185 | BASE GEARBOX SEAL RETAINER DEOILER | 1 | |
| PWA80186 | DRIFT GEARBOX CARBON SEAL INSTALLATION DEOILER | 1 | |
| PWA80222 | ADAPTER PULLER GEARBOX FACE SEAL ROTATING RING DEOILER | 1 | |
| PWA85451 | CONNECT-OIL SEALING VEHICLE A767 | 4 | |
| PWC 37078 | DRIFT OIL SEAL | 11 | |
| PWC-37078 | DRIFT OIL SEAL | 11 | |
| PWC-37434 | DRIFT OIL SEAL | 9 | |
| PWC-38382 | Drift, Oil Seal Removal | 9 | |
| PWC30046-52 | PULLER STARTER GENERATOR OIL SEAL CARRIE | 16 | |
| PWC30046-54 | PULLER, OIL SEAL | 14 | |
| PWC30046-57 | PULLER - OIL SEAL CARRIER | 9 | |
| PWC30075 | DRIFT STARTER GENERATOR OIL SEAL CARRIER | 11 | |
| PWC30646 | PULLER - OIL SEAL CARRIER | 1 | |
| PWC30675 | DRIFT, OIL SEAL | 7 | |
| PWC30810 | PUSHER/PULLER - OUTPUT SHAFT OIL SEAL | 6 | |
| PWC30810 REV E. | PUSHER/PULLER - OUTPUT SHAFT OIL SEAL | 1 | |
| PWC31382-01 | EXTRACTOR OIL SEAL ACCESSORY GEARBOX MAINSHAFT | 4 | |
| PWC31382-02 | EXTRACTOR, FUEL PUMP AND OIL PUMP ACCESSORY DRIVE OIL SEALS | 3 | |
| PWC37077 | ADAPTER-PULLING HYD PUMP OIL SEAL (V59603 | 10 | |
| PWC37077A | Adapter, Pulling, Oil Seal Carrier | 2 | |
| PWC37078 | Drift, Oil Seal Carrier | 11 | |
| PWC37088-004 | DRIFT, OIL SEAL | 11 | |
| PWC37088-2 | Drift, Oil Seal, Starter-Gen & Fuel Pump | 7 | |
| PWC37088-2B | DRIFT, OIL SEAL | 1 | |
| PWC37088-3 | Drift, Oil Seal, Starter-Gen & Fuel Pump | 4 | |
| PWC37088-4 | Drift, Oil Seal, Alternator Drive Seal | 4 | |
| PWC37395 | DRIFT, AGB OIL SEAL | 7 | |
| PWC37433 | Base, Oil Seal | 10 | |
| PWC37433-8 | BASE OIL SEAL ATR72 | 1 | |
| PWC37434 | DRIFT - OIL SEAL (MV7672-5-04) | 9 | |
| PWC37612 | Drift, Alternator Drive Oil Seal Carrier (Pre-SB20198) | 1 | |
| PWC37651 | PULLER OIL SEAL CARRIER | 14 | |
| PWC37750 | Puller, Starter Generator Oil Seal Carrier | 1 | |
| PWC38077 | PULLER ALTERNATOR DR. OIL SEAL CARRIER | 12 | |
| PWC38077B | PULLER, ALTERNATOR DRIVE OIL SEAL CARRIER | 3 | |
| PWC38078 | DRIFT-ALTERNATOR OIL SEAL (V59603) | 11 | |
| PWC38079 | BASE-ALTERNATOR DRIVE OIL SEAL (V59603) | 13 | |
| PWC38079BASE, ALTERNATOR DRIVE OIL SEAL CARRIER | BASE, ALTERNATOR DRIVE OIL SEAL CARRIER | 1 | |
| PWC38380 | Drift, Alternator Oil Seal Carrier | 14 | |
| PWC38382 | DRIFT, OIL SEAL CARRIER, STARTER-GEN & FUEL PUMP | 9 | |
| PWC41382 | APU AC GENERATOR DRIVE OIL SEAL?? REMOVE/INSTALL | 3 | |
| PWC41382B | EXTRACTOR, AC GENERATOR DRIVE OIL SEAL | 1 | |
| PWC41383 | EXTRACTOR-OIL SEAL, ACCESSORY GEAR BOX MAINSHAFT | 3 | |
| PWC42161 | Puller AGB oil seal | 1 | |
| PWC42162 | Drift AGB oil seal | 1 | |
| PWC48534 | PULLER, SEAL OIL PUMP | 1 | |
| PWC51261 | PULLER - OIL SEAL CARRIER | 3 | |
| PWC55744 | DRIFT-IMPELLER BREATHER OIL SEAL FROM CARRIER | 5 | |
| PWC55894 | PULLER SEAL CARRIER PMA OIL SEAL | 6 | |
| PWC55934 | BASE-IMPELLER BREATHER OIL SEAL TO CARRIER | 5 | |
| PWC55956 | DRIFT-IMPELLER BREATHER OIL SEAL TO CARRIER | 6 | |
| PWC56036 | FRIF OILSEAL INSTALL | 9 | |
| PWC56504-01 | DRIFT, ALTERNATOR DRIVE OIL SEAL CARRIER | 3 | |
| PWC56517 | Drift, Alternator Drive Oil Seal Carrier | 9 | |
| PWC56528 | Drift, Oil Seal | 15 | |
| PWC56528A | DRIFT, OIL SEAL | 2 | |
| PWC57113 | DRIFT-MULTI PURPOSE (ASSY PMA OIL SEAL TO CARRIER) | 6 | |
| PWC57349 | PWC 150 Oil Seal Drift | 8 | |
| PWC57349-IAS | PWC 150 Oil Seal Drift | 1 | |
| PWC57350 | BASE OIL SEAL CARRIER | 5 | |
| PWC64372 | BASE-PMA. OIL SEAL TO CARRIER Q400 | 6 | |
| PWC64373 | BASE-MULTI PURPOSE (DISASSY) PMA OIL SEAL TO CARRIER (ASSY) | 7 | |
| PWC68694 | PLAIN SEAL PULLER * (REQUIRED IF AGB OIL CONSUMPTION IS OVER 0.1CC PER HOUR) | 3 | |
| PWC68695 | PLAIN SEAL DRIFT * (REQUIRED IF AGB OIL CONSUMPTION IS OVER 0.1CC PER HOUR) | 3 | |
| PWC70681 | DRIFT OIL SEAL CARRIER | 4 | |
| PWC70838 | PULLER, OIL SEAL CARRIER | 6 | |
| RB6796918 | Install Turbine & Exh Colct Support Oil Bellows Seal Dft | 2 | |
| RB6872176 | Puller Seal Assembly Oil Bellows | 2 | |
| RB6893739 | Puller-Rear Compressor Bearing Oil Slinger & Seal | 2 | |
| RBT18610 | Transmission Oil Pump Seal Installer | 1 | |
| RBW6500X01611-W142E-3T | Oil Seal Housing Removal Puller | 1 | |
| RBW6500X01611-W142F-3T | Oil Seal Removal Press Tool | 2 | |
| RBW6500X01611-W142H-3T | Tail Rotor Gear Box Output Oil Seal Removal & Press Tool | 1 | |
| RBW6521A00138-W142G-3T | INPUT OIL SEAL REMOVAL PRESS TOOL, IGB INPUT | 2 | |
| RBW6521A00138-W142H-3T | Input Oil Seal Insert Press Tool, Igb Input | 1 | |
| RBW6521A00138-W142N-3T | Oil Seal Assembly Support Tool | 1 | |
| RBW6521A00138-W142P-3T | Oil Seal Assembly Press Tool | 1 | |
| RBW6521A00138W142G-3T | Input Oil Seal Removal Press Tool, Igb Input | 2 | |
| RBW6521G00131-8G | OIL SEAL INSTALLATION / REMOVAL KIT | 2 | |
| RBW6522A00231-W142AJ-3T | Tail Rotor Gear Box/Servo Actuator Oil Seal Fit/Extracting Tool | 2 | |
| RBW6522A00231-W142AK-3T | Tail Rotor Gear Box/Mast Output Oil Seal Assembly Press Tool | 1 | |
| RBW6522A00231-W142H-3T | Tail Rotor Gear Box Input Oil Seal Removal And Press Tool | 1 | |
| RBW6522A00231-W142S-3T | Tail Rotor Gear Box/Mast Output Oil Seal Assembly Support Tool | 1 | |
| RPK83MG01 | SEAL FACE SEAL OIL KIT | 1 | |
| SP506446 | SEAL OIL | 1 | |
| ST-295 | DRIFT, OIL SEAL PLUG INSTALLATION | 1 | |
| ST-383 | TOOL, CRANKSHAFT OIL SEAL INSTALLATION | 2 | |
| ST383 | TOOL, CRANKSHAFT OIL SEAL INSTALLATION | 2 | |
| T 27351 | Pliers, Coiloc Seal | 4 | |
| T-27351 | Pliers, Coiloc Seal - I will need to know the dash # | 4 | |
| T-3164660 | REAR OIL SEAL REPL KIT | 1 | |
| T27351 | Coiloc Seal Pliers | 4 | |
| lC569l | PULLER NO. 6 BEARING INNER RING & ROTATING OIL SEAL | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
