| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| PWC40283 | OIL RIG | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 150QH-05-01 | HANDHELD IDG OIL SERVICE RIG (MALABAR) | 1 | |
| 1595A0000-02 | RIGHT FLIGHT SPOILER ACTUATOR | 1 | |
| 250G-00-1-0-1-01-0-0-0-A | IDG OIL DISPENSER / RIG | 1 | |
| 390-59001-0035 | SPOILER RIG AID | 1 | |
| 4940-99-236-5697 | PORTABLE OIL TEST RIG | 1 | |
| 7007 | OIL REPLENISHING RIG | 12 | |
| 7011 | CSD OIL RIG (CART SERVICE ENGINE OIL) | 8 | |
| 1702274 | PORTABLE OIL TEST RIG | 1 | |
| 4920-99-617-2442 | PORTABLE OIL TEST RIG | 1 | |
| 73-0067-02 | TEST RIG ADAPTER - SUMP OIL TUBE | 1 | |
| 82740010 | RIGGING TOOL - ALIGNMENT OF THE ROLL SPOILER ACTUATOR | 1 | |
| 78100011534 | KIT - RIGGING SPOILER/AILERON (CLINOMETER) | 1 | |
| 82740010-001-58 | RIGGING TOOL - ALIGNMENT OF THE ROLL SPOILER ACTUATOR | 2 | |
| 856A3267 | TEST RIG ADAPTER - SUMP OIL TUBE | 1 | |
| 856A3267G02 | TEST RIG ADAPTER - SUMP OIL TUBE | 10 | |
| 92A99107 | KIT - RIGGING SPOILER/AILERON (CLINOMETER) | 1 | |
| 92A99107-1 | KIT, RIGGING SPOIL/AILERON | 2 | |
| 98A27601021000 | RIGGING PIN-INNER SPOILER, AIRBRAKE CONTROL | 2 | |
| 98F27608236000 | RIGGING TOOL - ACTUATOR, SPOILER 1 | 3 | |
| 98F27608236001 | RIGGING TOOL-ACTUATOR,SPOILER 1 | 6 | |
| 98F27608236002 | RIGGING TOOL ACT SPOILER | 1 | |
| 98F27608236003 | RIGGING TOOL - ACTUATOR, SPOILER 1 | 12 | |
| 98F27608253000 | RIG TOOL ACTUATOR SPOILER 1 | 7 | |
| 98L27601000000 | SHIM, RIGGING - SPOILERS | 3 | |
| 98L27601001000 | SPANNER-RIGGING,SPOILER EBHA | 1 | |
| ACN16-TFR6-B | CABLE -, NORTEC 16 PIN LEMO TO TRIAX FISCHER/LEMO CONNECTOR RIGHT ANGLE, BRIDGE COIL CONFIGURATION. 6FT, NORTEC 500-2000 SERIES INSTRUMENTS. Includes Certificate of Conformance. | 1 | |
| AF-5273 | RIGID STRAIGHT SURFACE PROBE, ABS SHIELDED, .125"Ø , .100"Ø COIL DIAMETER, 1-3MHz WITH A 2MHz CENTER FREQUENCY, ,700"( 17.788mm ) DROP, 90° JOGGLE, SUPPLIED WITH A TRIAX FISCHER CONNECTOR, 4.0" (101.6mm) LONG. Includes Test Report and Certificate of Confo | 1 | |
| AF-5274 | RIGID STRAIGHT SURFACE PROBE, ABS SHIELDED, .125"Ø , .100"Ø COIL DIAMETER, 1-3MHz WITH A 2MHz CENTER FREQUENCY, ,700"( 17.788mm ) DROP, 30° JOGGLE, SUPPLIED WITH A TRIAX FISCHER CONNECTOR, 12.0" (304.8mm) LONG. Includes Test Report and Certificate of Conf | 1 | |
| AH120-100 | ENGINE PLUGS (left & right engine deck, oil cooler plugs) (set of 3) | 1 | |
| AP95-5B/30-50KHZ | Surface Probe- Right angle bent, 5.0" inches overall length with 0.5" inch drop and 0.25" inch diameter tip. Operating frequency 1KHz -30KKHz, Triax Fischer/Lemo triax connector, bridge differential coil configuration | 1 | |
| APN-5/500K | RIGID STRAIGHT SURFACE PROBE, 200KHz-1MHz WITH A CENTER FREQUENCY OF 500KHz, 31 um Coil. .125"Ø, 5.0" LONG WITH A MICRODOT CONNECTOR Includes Test Report and Certificate of Conformance | 1 | |
| APN-91-4.5/L-500K | RIGID SURFACE PROBE 500KHZ, 90 DEGREE, .125" OD, .100" DROP, 4.5" LONG, MICRODOT CONNECTOR, COIL 47uh LOCATOR. Includes Test Report and Certificate of Conformance | 1 | |
| APN-95-5/500K | RIGID SURFACE PROBE, 90° DEGREES, .500" DROP, .125"Ø, 5.0" LONG WITH MICRODOT CONNECTOR 200 KHZ-1 MHZ WITH A CENTER FREQUENCY OF 500 KHZ, 31UM COIL. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| ATPND-95-6B | RIGID SURFACE PROBE, DUAL COIL, 50-500KHZ, 90° DEGREES, .500" DROP BENT, 6.0" LONG, TRIAX FISCHER CONNECTOR. Includes test report and Certificate of Conformance. | 1 | |
| B0B05B | OIL SERVICE RIG | 1 | |
| B20003-75 | #2 AILERON TAP SPOILER RIGGING PIN KIT | 1 | |
| C27062-1 | TEST BLCK-CARTRIGE VALVE, FLIGHT SPOILER | 3 | |
| C27069 | RIGGING EQPT. INTERLOCK VALVE CABLE GROUND SPOILER | 1 | |
| C27069-1 | RIGGING EQUIPMENT - INTERLOCK VALVE CABLE, GROUND SPOILER | 3 | |
| C27069-12 | Rigging Equipment - Interlock Valve Cable, Ground Spoiler | 12 | |
| C27069-20 | Rigging Equipment - Interlock Valve Cable, Ground Spoiler | 11 | |
| C27069-20 | RIGGING EQUIPMENT - INTERLOCK VALVE CABLE. GROUND SPOILER | 11 | |
| CB2010-001 | RIG CLEANING TOILET WASTELINE | 2 | |
| CP009 | SHOCK STRUT OIL SERV RIG B737 | 1 | |
| CTS401R79A | Gauge - roll spoiler neutral setting (rigging) | 2 | |
| DC10RPS-4 | RIGGING PIN-SPOILER SYS | 1 | |
| DH1025 PM | OIL CHARGING RIG | 1 | |
| DH13PM | ENGINE OIL FILLING UP RIG. | 5 | |
| E120-100 | ENGINE PLUGS (left & right engine deck, oil cooler plugs) (set of 3) | 1 | |
| G27001-1 | USED AS A LOCK BETWEEN THE ACTUATOR AND THE SPOILER HINGE FITTING TO HOLD SPOILER OPEN AGAINST SYSTEM PRESSURE DURING MAINTENANCERIGGING. | 10 | |
| G27002-1 | USED AS A LOCK BETWEEN THE ACTUATOR AND THE SPOILER HINGE FITTING TO HOLD SPOILER OPEN AGAINST SYSTEM PRESSURE DURING MAINTENANCERIGGING. | 10 | |
| G600-270016-105 | Fixture - Inboard And Outboard Flaps And Flight Spoiler Rigging (Lh) | 4 | |
| G600-270016-106 | SPOILER RIGHT HAND | 4 | |
| G600-270016−105 | FIXTURE - INBOARD AND OUTBOARD FLAPS AND FLIGHT SPOILER RIGGING (LH) | 4 | |
| G600-270016−106 | FIXTURE - INBOARD AND OUTBOARD FLAPS AND FLIGHT SPOILER RIGGING (RH) | 4 | |
| G600−270016−105 | FIXTURE − INBOARD AND OUTBOARD FLAPS AND FLIGHT SPOILER RIGGING (LH) | 4 | |
| G600−270016−106 | FIXTURE − INBOARD AND OUTBOARD FLAPS AND FLIGHT SPOILER RIGGING (RH) | 4 | |
| GA478 | PORTABLE OIL TEST RIG | 1 | |
| GM/A/5317 | OIL REPLENISHING RIG | 1 | |
| GM/D/5317 | OIL REPLENISH RIG | 1 | |
| HU25445-1 | AIR FLOW RIG OIL DIST. | 1 | |
| HU25445/1 | RIG - OIL DISTRIBUTION AIR FLOW | 1 | |
| HU81215-1 | Oil seal joint RIG-INHIBITING | 4 | |
| J1782801 | OIL CONTROL gun (rigid tube) | 1 | |
| J18163536 | Digital Oil Con C/W Rigid & Flexi Nozzle | 1 | |
| J20003-11 | RIG PIN PAX DOOR / CGO DOOR / ELEV / SPOILER | 6 | |
| JMP/125/D/0174/C901 | Super Sea Sprite Oil Replenishment Rig | 1 | |
| JMP/GEM/D/6310/C200 | Oil Replenishment Rig | 1 | |
| JMP/GEM/D/6310/C300 | Oil Replenishment Rig | 1 | |
| JMP/MK8/D/1490/C902 | Oil Replenishment Rig | 1 | |
| MD82RPS-3 | RIG PIN SET-FLT CONT & SPOILER | 1 | |
| MIT65-45116 | B737 GROUND SPOILER RIG PIN | 17 | |
| MS4001-380 | VACUUM TOILET CLEANING RIG TOOL | 1 | |
| PA71-200 | RIG TEST - OIL SYSTEM LEVEL | 1 | |
| PF53361-2PWS | CSD OIL RIG (CART SERVICE ENGINE OIL) | 12 | |
| PF53361-9P | IDG OIL DISPENSER / RIG | 1 | |
| RFFLDSPX02 | IDG OIL SERVICE RIG | 1 | |
| RRT058599 | OIL PRESSURE FILL RIG | 6 | |
| SCA-150-1QT | OIL CHARGING RIG | 2 | |
| SP0ILERRIGGINGKIT | SPOILER RIGGING KIT | 1 | |
| TI-TAN | TITRA-LUBE TAN , LOT#BOX# USE BEFORE ENVIRONMENTAL TEST KITS( FOR TESTING OIL) COUNTRY OF ORIGIN: UNITED STATES | 1 | |
| TOILET | TOILET CLEANING RIG TOOL | 1 | |
| Y52-105 | OIL COOLER INLET PLUG (under right wing) | 1 | |
| 98A27601021000 | RIGGING PIN,INNER SPOILER,AIRBRAKE CONTR | 2 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
