| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| PWC55553 | Oil In | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 3409536 | Gun Oil Replenishing (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 7011 | HANDHELD ENGINE OIL REPLENISHING PUMP (CALIBRATION) | 1 | |
| (CALIB) 98L27601000000 | TOOL SHIM-SETTING,SPOILER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98S57003029000 | PATIN DE DELESTAGE VOILURE EXTREME ATR72 | 1 | |
| (CALIB) 98S79005000000 | OIL ENGINE DRAINING CPLG-9905A11 | 1 | |
| (CALIB) ACN16-TF6-R | CABLE - NORTEC (16 PIN LEMO) TO TRIAX FISCHER/LEMO CONNECTOR REFLECTION COIL CONFIGURATION, 6FT LONG, NORTEC 500-2000 SERIES INSTRUMENTS. INCLUDES CERTIFICATE OF CONFORMANCE. (CALIBRATION) | 1 | |
| (CALIB) AIT120001 | Oil filling unit (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DH13PM | OIL FILLING UNIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GSE 099 | GUN - 1/4 HYDRAULIC SYSTEM OIL REPLENISHING (PHOSPHATE ESTER) (CALIBRATION) | 1 | |
| (CALIB) J27005-48 | LOCK eqpt -INBD/OUTBD, SPOILER ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| 0 PPM | CALIBRATING OIL STANDARD 2 | 1 | |
| 00127-103-000 | MANOMETER INSTALLED ON OIL FILLING UNIT (AIT20001) | 1 | |
| 002702 | COUPLING - OIL SERVI | 1 | |
| 0031-0133-1 | COUPLING, OIL FILL | 5 | |
| 0031-0134-1 | OIL FILL COUPLING ASSEMBLY, SIZE -8 PUSH PULL TYPE. | 4 | |
| 012A0061-1 | TOP KIT � NO.2 WINDOW HEAT COIL CORD ASSEMBLY | 4 | |
| 01402697102/10 | HELI-COIL FINISHING TAP | 1 | |
| 01402697202/10 | HELICOIL TAP FINALCUT TYPE 0140.2UNF 10-32 / 3B | 1 | |
| 01402747102/10 | HELICOIL TAP FINALCUT TYPE 0140.2 1/4-28 UNF | 1 | |
| 0150-0169600 | HELI-COIL INSTALLATION TOOL | 1 | |
| 01500169700/10 | HELICOIL INST.TOOL TYPE H-PSG 10-32 UNF | 1 | |
| 01500280700/10 | HELICOIL INST TOOL TYPE H-PMG9/16-18 UNF | 1 | |
| 0180-3010000 | HELI-COIL WITHDRAWING TOOL | 3 | |
| 03ABA1 | SYNTHETIC BASE LUBRICATING OIL-TURBINE ENGINE | 1 | |
| 0412-001 | OIL SAMPING TOOL TGB/1GB | 1 | |
| 042-1412-000 | OIL DRAIN AIR OPERATED | 1 | |
| 05RAB9 | ADHESIVE TAPE ALUMINIUM FOIL | 1 | |
| 06-4005-0511 | CONTAINER, HYD.OIL SERVICING UNIT | 15 | |
| 06-4035-0500 | UNIT - HYDRAULIC OIL SERVICING (MIL-PRF-5606) (8 US GAL.) | 12 | |
| 06-4035-0500 | UNIT, HYDRAULIC OIL SERVICING | 12 | |
| 06-5009-6800 | OIL FLUID SERVICING UNIT | 7 | |
| 06-5009C6500 | SERVICE UNIT, ENGINE OIL | 1 | |
| 06-5009C6800 | HYDRAULIC OIL DISPENSER RESERVOIR SERVICING | 1 | |
| 06-5010-6500 | ENGINE OIL SERVICE UNIT | 3 | |
| 06-5010-6800 | Engine Oil Service Unit | 8 | |
| 06-5020-3600 | Cart - Servicing, Engine Oil | 3 | |
| 06-5021-1500 | ENGINE/ IDG FILLING CART OR GUN ¼ ENGINE OIL REPLINISHING | 8 | |
| 06-5021-1800 | Fluid Service Unit (CE) - Oil 23699 / Hydraulic 87257 - Connects to 5 Gallon Container | 10 | |
| 06-5021-3600 | GUN - 1/4 HYDRAULIC SYSTEM OIL REPLENISHING (PHOSPHATE ESTER) | 11 | |
| 06-5022-6500 | UNIT, OIL RESERVOIR SERVICING | 17 | |
| 06-5022-6500-A7 | UNIT – HAND CARRY HYD. OIL SERVICING (MIL-H-5606), 2 GALLONS U.S. | 3 | |
| 06-5022-6800 | ENGINE OIL SERVICE UNIT (2 GAL/7.6 I) | 14 | |
| 06-5022-6800 | SERVICING UNIT, ENGINE OIL, POR | 14 | |
| 06-5022-6800-A2 | ENGINE OIL SERVICE UNIT | 2 | |
| 06-5022-6800A2 | SERVICE UNIT: OIL,ENGINE,HAND PUMP, | 2 | |
| 06-5022-6C00 | UNIT HAND CARRY LG HYD. OIL SERVICING MIL-H-5606 | 9 | |
| 06-50226500 | UNIT, OIL RESERVOIR SERVICING | 17 | |
| 06-5024-3800 | ENGINE OIL SERVICE UNIT (55 GAL/208 I) | 4 | |
| 06-5042-0800 | ENGINE OIL SERVICE CART (8 GAL/30 I) | 6 | |
| 06-5042-800 | ENGINE OIL SERVICE CART | 1 | |
| 06-5043-1800 | Engine Oil Service Cart | 1 | |
| 06-5073-0800 | CSD / Reservoir Service Unit - Engine Oil - MIL-PRF236999 | 4 | |
| 061475-100 | PORTABLE ENGINE OIL SERVICING UNIT | 1 | |
| 061477-100 | PORTABLE TRANSMISSION OIL SERVICING UNIT | 1 | |
| 06CBB | HELICOIL KIT 5/32 BOTTOMING TAP | 3 | |
| 06−4035−0500 | Unit − Hydraulic Oil Servicing | 12 | |
| 091-6739 | OIL DRAIN ATTACHMENT | 1 | |
| 0MAT4-72 | LUBRICATING OIL KIT | 2 | |
| 0MP2505-6 | COVER, DUST INTEGRATED OIL INDICATOR | 15 | |
| 0MP2506-6 | COVER, DUST INTEGRATED OIL INDICATOR | 10 | |
| 0U 190363 | OIL FILLING ADAPTOR | 27 | |
| 0U 190364 | OIL DRAINING ADAPTOR | 23 | |
| 0U145914 | OIL DRAINING TOOL | 20 | |
| 0U190363 | TOOL-OIL FILLING,THS ACTUATOR | 27 | |
| 0U190363 | TOOL, OIL FILLING,THS | 27 | |
| 0U190364 | OIL DRAINING TOOL | 23 | |
| 10 PPM | CALIBRATING OIL STANDARD 2 (8 OZ/ BOTTLE) | 1 | |
| 10-4036-0010 | TOILET SERVICING EQUIPMENT | 12 | |
| 10-6402-0010 | CART, GROUND SERVIC-ING - TOILET | 7 | |
| 100 PPM | CALIBRATING OIL STANDARD 2 (8 OZ/ BOTTLE) | 1 | |
| 10000299 | VACUUM TOILET CLEANING SYSTEM | 1 | |
| 1004- | OIL SERVINCING CART | 6 | |
| 101-00540 | TESTER - FUEL GAGE SYSTEM, FUEL QTY, OIL QTY, AND VOLUMETRIC FILL. (BARFIELD INSTRUMENT CORP.) | 2 | |
| 101-00540 (MOD8000) | TESTER - FUEL GAGE SYSTEM, FUEL QTY, OIL QTY, AND VOLUMETRIC FILL. (BARFIELD INSTRUMENT CORP.) | 1 | |
| 101-930023-3 | TUBE ,ENGINE OIL DRAIL | 2 | |
| 101-930023-5 | CAP ASSEMBLY-DRAIN INSTL,OIL,ENGINE | 3 | |
| 1019-101 | ENGINE/OIL COOLER INLET PLUGS (set of 2) | 1 | |
| 1041J16A | TOILET FLUSHING ADAPTER | 1 | |
| 10483 | Oil Servicing Cart | 1 | |
| 1013832 | GAS DETECTOR - USED TO DETECT FUEL IN OIL SYSTEM | 4 | |
| 1018157 | GAS DETECTOR - USED TO DETECT FUEL IN OIL SYSTEM | 3 | |
| 1038742 | Rescue Foils Wing-TankrettungsfolieA320F | 1 | |
| 1055-8300 | Engine Oil 2 Gallon (Open System) | 1 | |
| 1059-8300 | Engine Oil Fluid Dispenser - 5 Gallon | 1 | |
| 10800766 | TOILET WASTE LINES - SERVICING | 3 | |
| 109-0455-01-101 | OIL COOLING BLOWER | 1 | |
| 109-3101-69-301 | OIL INJECTION PUMP | 2 | |
| 109-3900-80-113 | OIL NITROGEN CHARGING ADAPTER | 1 | |
| 10C1087G01 | FIXTURE, PULLER - NO. 5 BEARING AIR/OIL SEPARATOR (PULLER FIXTURE) | 1 | |
| 10C1096P01 | PROTECTOR - NO. 4 BEARING OIL SEAL (BEARING OIL SEAL PROTECTOR) | 1 | |
| 10C1222G01 | FIXTURE, INSTALL/REMOVE - AIR/OIL SEPARATOR NUT | 1 | |
| 10C1223 | FIXTURE, PULLER - OIL INLET CO | 1 | |
| 10C1223G01 | FIXTURE, PULLER - OIL INLET COVER (PULLER FIXTURE) | 1 | |
| 10C1344 | FIXTURE, PULLER- NO 5 BEARING AIR/OIL SEPARATOR | 1 | |
| 10C1400 | GAGE - NO 4 BEARING TO FWD ROTATING OIL SEAL | 1 | |
| 10C1400P01 | GAGE, NO. 4 BEARING TO FORWARD, ROTATING OIL SEAL, | 1 | |
| 10GEN38 | TOILET DECLOGGING ADAPTER | 1 | |
| 10M-9460 | NOZZEL – APU OIL SERVICING J HOOK | 1 | |
| 1104 | CART, OIL, SERVICING | 5 | |
| 114-158 | SPOILER IND. | 1 | |
| 114158 | SPOILER IND. | 1 | |
| 11305001 | OIL PUMP/DISPENSER, 5L, ENGINE OIL | 1 | |
| 115096-2 | TUBE ASSY OIL IN LINE IDG | 1 | |
| 1159GSE40004-1 | COVER, APU DOOR OIL COOLING | 1 | |
| 1159GSE50034-1 | INTEGRATED DRIVE GENERATOR OIL-COOLER PROTECTIVE COVER (8600138) : GSE7200823 | 1 | |
| 1159GSE50114- | ENGINE AND INTEGRATED DRIVE GENERATOR OIL REPLENISHING KIT | 1 | |
| 1159GSE50114-1 | ENGINE AND INTEGRATED DRIVE GENERATOR OIL REPLENISHING KIT | 1 | |
| 1159GSE50114-3 | REPLENISHING KIT, OIL ENG/IDG | 3 | |
| 117-12001W3 | OIL DRAIN HOSE | 1 | |
| 1185-2CN246 | HELICOIL INSERT 8-32 | 1 | |
| 1191-10CN625 | HELICOIL INSERT | 1 | |
| 1191-10CN938 | HELICOIL INSERT 5/8-18 | 1 | |
| 1191-12CN1125 | HELICOIL INSERT 3/4-16 | 1 | |
| 1191-14CN1321 | HELICOIL INSERT 7/8-14 | 1 | |
| 1191-16CN1500 | HELICOIL INSERT 1-14 | 1 | |
| 1191-3CN285 | HELICOIL INSERT 10-32 | 2 | |
| 1191-4CN375 | HELICOIL INSERT 1/4-28 | 1 | |
| 1191-5CN469 | HELICOIL INSERT 5/16-24 | 2 | |
| 1191-6CN562 | HELICOIL INSERT 3/8-24 | 1 | |
| 1191-7CN656 | HELICOIL INSERT 7/16-20 | 2 | |
| 1191-8CN750 | HELICOIL INSERT 1/2-20 | 1 | |
| 1191-9CN844 | HELICOIL INSERT 9/16-18 | 1 | |
| 1195-02 | HELICAL COIL INSERT | 1 | |
| 11A57-11785 | SPOILER MAINT. KEY | 1 | |
| 11C3067 | FXTR - RTNR-NO 4 BRG INNER RACE/OIL SCOOP/ROTATING SEAL/FWD SEAL | 1 | |
| 11C3206G01 | FIXTURE, TARGET - OIL NOZZLE, NO. 1 BEARING | 1 | |
| 11C3207G01 | KIT, PLUG - OIL NOZZLE, NO. 1 BEARING | 1 | |
| 11C3328 | TOOL SET, INSTALL/REMOVE-NO 5 BRG AFT SEAL & AIR OIL EXT | 1 | |
| 11C3455 | FIXTURE - ALIGNMENT TUBE NO. 1 BEARING OIL SUPPLY | 1 | |
| 11C3596 | FIXTURE - PLUG - NO. 5 BEARING OIL FLOW (FLOW CHECK FIXTURE) | 1 | |
| 11C4215 | FIXTURE - RESTRAINING SEAL AIR/OIL ROT NO 4 BRG | 1 | |
| 11C4472 | FIXTURE - INSTALL/REMOVE-COOLER OIL-AIR COOLED | 1 | |
| 11C4472G01 | SPL-11575 - FIXTURE - REMOVE/INSTALL, AIR COOLED OIL COOLER | 1 | |
| 11C4472G02 | SPL-11575 - FIXTURE - REMOVE/INSTALL, AIR COOLED OIL COOLER | 1 | |
| 11C4693G01 | FIXTURE, INSTALL/REMOVE - MAIN FUEL OIL HEAT EXCHANGER | 1 | |
| 121000GSE220 | UNIT SERVICING ENGINE/VFG/APU OIL | 1 | |
| 122-11088-1B | SELF COIL BLIND ASSY | 1 | |
| 1227-06 | HELI-COIL EXTRACTING TOOL | 3 | |
| 1227-16 | HELICOIL OUTER UNSERT EXTRACTING TOOL | 3 | |
| 1227-4 | HELICOIL INSERT REMOVAL TOOL | 1 | |
| 1227-6 | HELICOIL - EXTRACTIN | 7 | |
| 123814 | SEAL TOILET DRAIN CHALLENGER | 5 | |
| 1241007 MOD2 | PROP OIL PRESS IND | 1 | |
| 13179B | INSERT OIL PLUG | 1 | |
| 1325J16C | Coupling - toilet fill/sluice | 4 | |
| 133-384022-1 | OIL DRAIN LINE | 1 | |
| 14-3000045 | Coiled Power Tool Cable 6 Pin - Length 16.4ft. (for EF, LF, BF, NF, HF, K, A, CL SS & BL-Series) | 1 | |
| 1412 | GUN ENGINE OIL | 1 | |
| 14406 | FIXTURE, MAIN OIL SCREEN ASSY | 1 | |
| 1442-04 | HELICOIL STANDARD INSERT 2B THREAD | 1 | |
| 1442-06 | HELICOIL STANDARD INSERT 2B THREAD | 1 | |
| 1442-2 | HELICOIL STANDARD INSERT 2B THREAD GO-HI GAGE | 1 | |
| 1443-5 | HELICOIL STANDARD INSERT 2B THREAD GO-HI GAGE | 1 | |
| 145-68502-404 | GROUND SPOILER FITTING | 1 | |
| 150 | 1 Quart & 1 Liter Turbine Oil O-C Gun | 7 | |
| 14810 | STRAP - WRIST, (GROUNDED) ADJUSTABLE ELASTIC WITH 6 FOOT COILED GROUND CORD. (DESCO INDUSTRIES INC.) | 1 | |
| 150 / WF174410-18 | FILLER, ENGINE AND IDG OIL (1 QUART) HAND HELD) | 1 | |
| 150 / WF174410-28 | 1 QUART & 1 LITER TURBINE OIL O-C GUN | 1 | |
| 150 / WF174410-5 | FILLER OIL ENGINE AND ADG | 1 | |
| 150 / WF174410-9 | OIL SERVICING GUN | 1 | |
| 150-1 | QUART / LITER TURBINE OIL O/C GUN | 9 | |
| 150-12 | GUN,1/4 OIL REPLENISH-ING-ENGINE | 2 | |
| 150-2 | MALABAR TURBINE OIL OC GUN | 1 | |
| 150-23 | TURBINE OIL GUN | 1 | |
| 150-3 | Cart - Servicing, Engine Oil | 2 | |
| 150-9 | MALABAR 150 TURBINE OIL GUN - ENGINES, APU, CSDS, IDGS | 1 | |
| 150/WF174410-28 | 1 QUART & 1 LITER TURBINE OIL O-C GUN | 1 | |
| 1501 | TURBINE OIL O-C GUN | 9 | |
| 15012 | ENGINE/ IDG FILLING CART OR GUN ¼ ENGINE OIL REPLINISHING | 2 | |
| 150QH-04-01 | CART - SERVICING, ENGINE OIL | 2 | |
| 150QH-06-01AFB | ENGINE OIL SERVICE CART | 1 | |
| 150QL-01-01 | DISPENSER - OIL SERVICING, 1 QT OIL CONTAINER WITH COUPLINGS FOR | 1 | |
| 150QL-01-01-AB | MALABAR 150 TURBINE OIL GUN | 1 | |
| 150QL-04-01 | Fluid Dispenser, Model 150-1 - Quart / Liter Turbine Oil O/C Gun | 2 | |
| 150QL-07-01-A | 1 QUART & 1 LITER TURBINE OIL O-C GUN | 1 | |
| 150QL-12-01-AB | 1 QUART TURBINE OIL PUMP | 1 | |
| 159GSE50114-1 | ENGINE AND INTEGRATED DRIVE GENERATOR OIL REPLENISHING KIT | 1 | |
| 159GSE50114-3 | ENGINE AND IDG OIL REPLENISHING KIT | 1 | |
| 1620 | STARRETT® Tool & Instrument Oil - 4oz Bottle | 1 | |
| 1688-10 | HELI-COIL GAGING INSPECTION | 1 | |
| 1688-12 | HELI-COIL GAGING INSPECTION | 1 | |
| 1688-6 | HELI-COIL GAGING INSPECTION | 1 | |
| 1688-8 | HELI-COIL GAGING INSPECTION | 1 | |
| 170 | STRUT OIL DISPENSING EQUIP. | 1 | |
| 175 | DISPENSER SERVICING ENGINE OIL | 3 | |
| 1702 | PUMP,CHARGING,OIL | 4 | |
| 17500M | OIL SERVICING | 3 | |
| 1755-2 | OIL SERVICING | 1 | |
| 177-103 | OIL COOLER INLET PLUG (RG models, Copilot Side) | 1 | |
| 18193-10 | TOOL FOR THREADING HOLES NECESSARY FOR INSTALLATION OF HELICOIL INSERTS IN THE TORQUE PLATE | 3 | |
| 18193-9 | TOOL (TAP) FOR THREADING HOLES NECESSARY FOR INSTALLATION OF HELICAL-COIL INSERTS | 1 | |
| 1870 7019 | FILLING EQUIPMENT - TANK OIL | 1 | |
| 19-182 | HANDHELD ENGINE OIL PUMP | 1 | |
| 190-32826-021 | BUSHING SPOILER HINGE, CRES, T.E. | 3 | |
| 1900C-110 | ENGINE INLET PLUGS & OIL COOLER PLUGS (set of 4) | 1 | |
| 1900D-100 | ENGINE/OIL COOLER INLET PLUGS (set of 4) | 1 | |
| 190364-000 | OIL DRAIN TOOL | 1 | |
| 1911-6CN0562 | HELI-COIL INSERT | 1 | |
| 1927-4 | HELI-COIL TWINSERT THREAD PLUG GUAGE | 1 | |
| 1991 | ENGINE OIL REPLENISING GUN | 4 | |
| 1C5691 | PULLER NO 6 BEARING INR RING & ROTATING OIL SEAL | 1 | |
| 1C5691 REV P | PULLER NO. 6 BEARING INNER RING & ROTATING OIL SEAL | 1 | |
| 1C5691G04 | Puller, No. 6R Bearing Inner Race and Rotating Oil Seal | 1 | |
| 1C5691REVP | PULLER NO. 6 BEARING INNER RING & ROTATING OIL SEA | 1 | |
| 1C6952P01 | Wrench, Spanner - Oil Tube High Pressure Turbine Rotor | 1 | |
| 1C6953 | PULLER - OIL TUBE NR 5 BEARING | 1 | |
| 1C6953G02 | Puller, Oil Tube No. 5 Bearing | 1 | |
| 1C9355 | FIXTURE, ASSEMBLY IMPINGEMENT - NO.1 BRG OIL NOZZL | 1 | |
| 1P16426 | DRIVER, REMOVE/INSTALL JET OIL FILTER | 1 | |
| 1SF5085-501/PWA81903A | JT9D Engine Gearbox Oil Leak Test Adapter/Gauge | 1 | |
| 1X56 134 518 | OIL DRAIN HOSE | 1 | |
| 1X56 137 035 | OIL DRAIN HOSE | 1 | |
| 1X56134516 | OIL DRAIN HOSE ASSY | 1 | |
| 1X56134518 | OIL DRAIN ADAPTER | 1 | |
| 1X56134519 | OIL DRAIN ADAPTER | 1 | |
| 1X56137035 | OIL DRAIN ADAPTER | 1 | |
| 1X56137050 | OIL DRAIN HOSE | 1 | |
| 1X56137050 (TEDECO P/N H 201) | OIL DRAIN HOSE | 1 | |
| 2 GALLON MALABAR TURBINE OIL DISPENSER | 2 GALLON MALABAR TURBINE OIL DISPENSER | 1 | |
| 2-50 | 18mm x 3/16" HELICOIL INSERT | 9 | |
| 2.000-16-UNS-3B-NO-GO | HELI-COIL TWINSERT THREAD PLUG GAUGE. | 1 | |
| 2000 | OIL STRAINER 1000 MICRON | 5 | |
| 204-040-760-113 | FILTER ASSEMBLY (ENGINE EXTERNAL OIL) | 1 | |
| 206-101 | ENGINE INLET PLUGS (206H - '98 & up, w/oil cooler inlet plug) (set of 3) | 1 | |
| 212-104 | OIL COOLER INLET PLUGS (aft of main engine inlet) (set of 2) | 1 | |
| 21990-02 | FOIL ANTISKATING | 2 | |
| 21C308G001 | COIL,MAGNETIZING | 1 | |
| 21C5956 | GENERATOR/APPLICATOR,MIST,OIL-INSTALLED ENGINE | 1 | |
| 21C7473G01 | TEE, OIL PRESSURE (ADAPTER, ENGINE AGB TO TRANSDUCER) | 1 | |
| 21C8061P01 | ADAPTER, OIL TANK DRAIN | 1 | |
| 250 | 2 Gallon Turbine Oil Dispenser | 9 | |
| 2404 | HELICOIL INSERT UNF 1/4-28X1.5D | 1 | |
| 2886 | KIT- STARTER SERVICE_REOILING GUN, FILL/DRAIN HOSE, SPILL KIT_[2886] | 2 | |
| 4001 | VACLAV CLEANER - VACUUM TOILET CEANING SYSTEM | 1 | |
| 4184 | V-COIL 04184 IMPERIAL UNC THREAD REPAIR INSERT WORKSHOP KITS - 1/4"-1/2" | 1 | |
| 4185 | V-COIL 04185 IMPERIAL UNF THREAD REPAIR INSERT WORKSHOP KITS - 1/4"-1/2" | 1 | |
| 4936 | HELICOIL 4936 MASTER THREAD REPAIR SET, INCH FINE | 4 | |
| 5209 | CRANKSHAFT NOSE OIL SEAL INSTALLER TOOL | 1 | |
| 5225 | CONTAINER - OIL RESISTANT | 1 | |
| 5625 | HELI-COIL INSERTING TOOL | 3 | |
| 5830 | IN LINE-AIR OILER | 1 | |
| 6065 | CONTAINER - OIL RESISTANT, 1 U.S.-GAL (3.8 L | 1 | |
| 7001 | HOSE - ENGINE OIL, REPLENISHING | 1 | |
| 7007 | GUN ENGINE OIL | 12 | |
| 7011 | HANDHELD ENGINE OIL | 8 | |
| 7012 | Handheld Engine Oil Replenishment Pump | 4 | |
| 7019 | Handheld Engine Oil Pump | 2 | |
| 7021 | GUN - 1/4 HYDRAULIC SYSTEM OIL REPLENISHING | 7 | |
| 7034 | POMPE CSD R-OILING GUN | 1 | |
| 7035 | OIL REPLENISHING PUMP | 1 | |
| 7036 | HANDHELD ENGINE OIL REPLENISHING PUMP | 1 | |
| 7048 | OIL REPLENISHING PUMP 1US QUART FOR OIL 2380 | 1 | |
| 7051 | CSD / IDG RE-OILING GUN | 3 | |
| 7074 | PUMP MANUAL FOR ENGINE OIL | 5 | |
| 7105 | AEROSHELL TURBINE OIL 560 RISE BRIDGER | 3 | |
| 7125 | GUN ENGINE OIL | 1 | |
| 7128.0 | Aeroshell turbine oil 560 rise bridger | 1 | |
| 7170 | GUN - 1/4 HYDRAULIC SYSTEM OIL REPLENISHING | 8 | |
| 7180 | 1 US QT PUMP, 2MU, 72IN HOSE, 1870, SG, BP TURBO OIL 2197 | 1 | |
| 7210 | GUN,1/4 OIL REPLENISH-ING-ENGINE | 8 | |
| 7211 | GUN,1/4 OIL REPLENISH-ING-ENGINE | 7 | |
| 7218 | DG/CSD ENGIFN OIL REFURBISHING TANK | 1 | |
| 7266 | RISBRIDGER 7266 IDG/VFSG/VFG OIL SERVICING PUMP | 1 | |
| 7551 | HELICOIL HAND INSERTING TOOL, INSERTING PREWINDER | 1 | |
| 8048 | OIL PRESSURE RELIEF SPOT FACER, OIL PRESSURE RELIEF VALVE SEAT REFACING | 1 | |
| 8050 | MEYER HYDRAULICS Oil Level Self-Adhesive Flexible Sticker, 1 in L, 2 in W, Vinyl | 2 | |
| 8051 | MEYER HYDRAULICS Oil Instruction Self-Adhesive Flexible Sticker, 2 in L, 3 in W, Vinyl | 3 | |
| 24053 | HELICOIL INSERT UNF 5/16-24X1.5D | 1 | |
| 29802 | VALVE OIL DRAIN | 2 | |
| 36023 | BOTTLE - NITROGEN CART - SERVICING, STRUT OIL INFLATOR - STRUT, LANDING GEAR GAUGE - PRESSURE, 0-3000 PSIG (0-20685 KPA) WRENCH - TORQUE BUCKET - 2.5 GALLON CAPACITY | 1 | |
| 53361 | CART - OIL SERVICE, (THE CART MUST HAVE A OZONE COUPLING OMP2506-3 OR THE EQUIVALENT) | 1 | |
| 53561 | HELICOIL INSTALLER 6/32" | 1 | |
| 57261 | 57261;PSD60-504 Interface at Wing Spar/Oil Qty | 1 | |
| 74919 | COIL SPRING PIN 1/8INX3/8IN | 1 | |
| 225126 | FILTER ASSEMBLY (ENGINE OIL) | 1 | |
| 285121 | EXCITER HOUSING & COIL ASSY | 1 | |
| 291617 | TWINSERT COIL INSTALLATION TOOL | 1 | |
| 294112 | TWINSERT COIL INSTALLATION TOOL OB | 1 | |
| 314150 | POINTED OILER | 10 | |
| 326281 | CAP, ANTI-RECOIL, MAIN OUTLET | 1 | |
| 326300 | NON-RECOIL PLUG - DISCHARGE HEAD OUTLET (ENGINE FIRE BOTTLE) | 1 | |
| 335014 | COIL CHAIN TRADE SIZE 5/0 | 1 | |
| 473036 | REPLACEMENT GAUGE TOOL NO. 473036 THIS PUMP CONTAINS A PNEUMATIC FOOT OPERATED HYDRAULIC PUMP, PRESSURE GAUGES, SUPPLY AIR OILER, PRESSURE REGULATOR AND HYDRAULIC HOSES. | 1 | |
| 539619 | SPRING OIL PRESSUR | 1 | |
| 637083 | SPRING OIL PRESSURE REL VLV | 1 | |
| 726695 | CONE AND RING FOR SHRINKING ON COIL | 1 | |
| 814978 | HELICOIL INSERT TOOL | 1 | |
| 844497 | LOWER CARGO COMPT FIRE EXTINGUISHER BOTTLE NON- COIL RECAP (KIDDE) | 2 | |
| 2001302 | Fluid Dispenser, 5-Gallon Capacity, MIL-H-5606, Turbine Fluids, Engine Oil, Low Pressure Unit, 7.2 cubic inch output per stroke, 15 ft hose | 1 | |
| 2001313 | Fluid Dispenser, 20-Gallon Capacity, MIL-H-5606, Turbine Fluids, Engine Oil, Low Pressure Unit, 7.2 cubic inch output per stroke, 15 ft hose. | 1 | |
| 2001803 | OIL SERVICING | 1 | |
| 2007485 | Fluid Dispenser, 2-Gallon Capacity, MIL-H-5606/83282/87257 or turbine fluids/engine oil. | 1 | |
| 2008711 | ADAPTER – OIL SERVICING | 1 | |
| 2064138 | TWINSERT COIL INSTALLATION TOOL IB | 1 | |
| 2064412 | HELICOIL INSTALLATION TOOL | 1 | |
| 2064443 | TWINSERT COIL INSTALLATION TOOL IB | 1 | |
| 3018131 | INDICATOR, OIL LEVEL | 1 | |
| 3021955 | REFLECTOR, OIL LEVEL INDICATOR | 1 | |
| 3409536 | GUN - OIL TANK REPLENISHMENT/PRIMING | 2 | |
| 5109900 | FORWARD TOILET DRAIN CAP | 1 | |
| 5305427 | ADAPTER ASSY OF TUBE TO BOSS,OIL SUPPLY #5-6 BEARING | 1 | |
| 6796098 | WRENCH - OIL SCREEN INSTALLATION & REMOVAL | 1 | |
| 6796137 | ALIGNING FIXTURE - OIL TUBE | 1 | |
| 6796203 | OIL SEAL PULLER - PLATES, ACCESSORY MAIN | 2 | |
| 6796918 | DRIFT INSTALLATION TURBINE AND EXHAUST COLLECTOR SUPPORT OIL BELLOW SEAL | 2 | |
| 6796920 | OIL JET, GAS GENERATOR BEARING PULLER | 2 | |
| 6796941 | KIT一INSTALLATION AND REMOVAL, OIL SEAL | 4 | |
| 6798040 | ADAPTER OIL INLET LINE | 2 | |
| 6798041 | ADAPTER OIL OUTLET LINE | 2 | |
| 6798047 | Wrench â Spanner, Oil Sump, Turbine, STOCK | 2 | |
| 6798048 | GAGE--PLUG, PRESSURE OIL PUMP BUSHIN | 1 | |
| 6798049 | GAGE--PLUG, SCAVENGE OIL PUMP BUSHING | 1 | |
| 6798050 | DRIFT--LUBE OIL PUMP GEARSHAFT BUSHING | 2 | |
| 6798051 | JIG--DRILL, PRESSURE OIL PUMP BODY BUSHING PIN | 1 | |
| 6798052 | JIG--DRILL, SCAVENGE OIL PUMP COVER BUSHING PIN | 1 | |
| 6798053 | JIG--REAM, LUBE OIL PUMP GEARSHAFT BUSHING | 1 | |
| 6798131 | WRENCH - SPANNER, REDUCTION GEAR OIL PUMP PRESSURE ADJUSTING VALVE THREADED BUSHING | 2 | |
| 6798804 | DRIVE SHAFT GEAR BEARING PULLER - TACHOMETER DRIVE OIL | 2 | |
| 6798928 | Protector – Power Turbine Oil Bellows Seal Puller | 3 | |
| 6799091 | RACK - CLEANING, LUBE OIL FILTER DISK | 1 | |
| 6799596 | SHAFT GEAR OIL SEAL FIXTURE - INSTALLATION, SPEED | 2 | |
| 6799708 | Fixture â Alignment, Inner Combustion Chamber Oil Tubes | 2 | |
| 6872760 | FIXTURE - MACHINING, OIL FILTER | 1 | |
| 6872874 | MASK - POWER TURNINE SUPPORT OIL SUMP | 1 | |
| 6893523 | PLATE, PULLER OIL PUMP SHAFT BEARING | 2 | |
| 6893700 | PRESS NO. 8 BEARING OIL JET | 2 | |
| 6893701 | NO. 8 BEARING OIL JET PULLER | 2 | |
| 6893739 | PULLER--COMPRESSOR REAR BEARING, OIL SLINGER AND SEAL | 2 | |
| 6895528 | #2 BRG AND OIL SLINGER PUSHER | 2 | |
| 7586395 | STRAINER, ELEMENT, MAIN OIL | 1 | |
| 8563392 | WRENCH, TORQUE – AFT ROTATING AIR/OIL SEPARATOR NUT (WRENCH) | 1 | |
| 23003267 | C20 Oil Strut Cleaning Kit | 4 | |
| 23007615 | OIL SUMP AND BEARING PASSAGE CLEANING KIT: RR250 SERIES | 3 | |
| 23008681 | ADAPTER----OIL INLET LINE | 1 | |
| 23008682 | ADAPTER OIL OUTLET LINE | 2 | |
| 23034223 | GAGE--TARGETING, OIL ORIFICE POSITION AND FLOW, REDUCTION GEAR REAR HOUSING ASSEMBLY | 1 | |
| 23052523 | Puller – Compressor Aft Bearing Inner Races & Forward Oil Impeller | 1 | |
| 23053555 | Puller – Oil Slinger, Power Turbine Aft Sump | 1 | |
| 23068480 | Plug – Service Oil Drain | 1 | |
| 111062120 | BRAKE BLEEDING HOSE. OIL RESISTANT, 6-7 MM INSIDE DIA | 1 | |
| 0205740080 | OIL LEVEL INDICATOR | 1 | |
| 0292720200 | PIPE,OIL,FRONT BEARING SUPPLY | 1 | |
| 0292720920 | PIPE,OIL,REAR BEARING SUPPLY | 1 | |
| 0292720940 | PIPE,OIL,REAR BEARING SUPPLY | 1 | |
| 0292727240 | PIPE,OIL,FRONT BEARING SUPPLY | 1 | |
| 0301031250 | OIL INLET UNION | 1 | |
| 0319727440 | PIPE, OIL INLET | 1 | |
| 0319727790 | PIPE,OIL SCAVENGE,REAR BEARING | 1 | |
| 0319727930 | PIPE,OIL SCAVENGE,REAR BEARING | 1 | |
| 0319728040 | PIPE,OIL SCAVENGE,REAR BEARING | 1 | |
| 0319728130 | PIPE,OIL SUPPLY,REAR BEARING | 1 | |
| 0319728220 | PIPE,OIL SCAVENGE,REAR BEARING | 1 | |
| 0319728230 | PIPE,OIL SCAVENGE,REAR BEARING | 1 | |
| 0319728250 | PIPE,OIL SUPPLY,REAR BEARING | 1 | |
| 0322727760 | PIPE,REAR BEARING OIL RETURN,PART 1 | 1 | |
| 0356660040 | DRAIN COOLING GROUP AIR OIL | 1 | |
| 0356720140 | REAR BEARING BACK OIL PIPE | 1 | |
| 0421720270 | PIPE-REAR BEARING OIL RETURN-1ST PORTION | 1 | |
| 0465720340 | OIL FILTER HOUSING | 1 | |
| 0465720420 | REAR BEARING BACK OIL PIPE | 1 | |
| 0465720900 | OIL DRAIN PIPE | 1 | |
| 0620220010 | OIL INDICATOR | 1 | |
| 0620720070 | PIPE, OILING REAR BEARING | 1 | |
| 0620720090 | PIPE, OILING REAR BEARING | 1 | |
| 1402747102 | HELICOIL TAP FINALCUT TYPE 0140.2 1/4-28 UNF | 1 | |
| 1411180104 | HELICOIL HAND INSERTING TOOL, MACHINE TAPS | 1 | |
| 1500169700 | HELICOIL INST.TOOL TYPE H-PSG 10-32 UNF | 1 | |
| 1503000000 | HELICOIL INSTALLATION TOOL | 1 | |
| 1586020000 | HELICOIL HAND INSERTING TOOL, TANG BREAK-OFF TOOL M2 | 1 | |
| 1586030000 | HELICOIL HAND INSERTING TOOL, TANG BREAK-OFF TOOL M2 | 1 | |
| 1586040000 | HELICOIL HAND INSERTING TOOL, TANG BREAK-OFF TOOL M2 | 1 | |
| 1803010000 | HELICOIL HAND INSERTING TOOL, EXTRACTING | 2 | |
| 2315MK3 | RISBRIDGER OIL DRAIN CONTAINER | 3 | |
| 2315MK4 | IDG OIL DRAIN OVERSPILL COLLECTION KIT | 10 | |
| 2370T040-401 | One leaking oil - one added to additional tab+A49 | 6 | |
| 2391-3CN221 | HELI-COIL TWINS OUTER | 1 | |
| 2391-4CN375 | HELI-COIL TWINSERT | 2 | |
| 2391-6CN375 | HELI-COIL TWINS OUTER | 1 | |
| 24127MP-V1 | ENGINE OIL SERVICING CART (WITH IN-LINE DIGITAL PINT METER) | 1 | |
| 2464M88P01 | SEAL, ROTATING, AIR AND OIL, NO. 4 BEARING, FORWAR | 1 | |
| 25-755-14S | VALVE: DRAIN,OIL, | 1 | |
| 25-9Y27-1A | OIL CHARGING STRUTS | 5 | |
| 250B-05-3-1-5-04-1-2 | TURBINE OIL DISPENSER | 1 | |
| 250B05-3-1-5-04-1-2 | OIL SERVICING PUMP | 1 | |
| 250B05-3-2-2-04-120A | MALABAR - TURBINE OIL DISPENSER | 1 | |
| 250G-05-1-1-1-03-1-0-1-A | TURBINE OIL DISPENSER | 1 | |
| 250G-05-2-0-1-03-0-0 | TURBINE OIL DISPENSER | 1 | |
| 25Y759A | ADAPTER, OLEO OIL CHARGING | 6 | |
| 2653-1 | TOILET DRAINING ADAPTER | 1 | |
| 2698-06 | TOOL FOR INSTALLATION OF OUTER TWINSERT COILS | 1 | |
| 269A9294 | Overhaul Tool 269A5174 Bearing Oil Pump | 1 | |
| 27-1-3649 | CAN, OIL REPLENISHING | 1 | |
| 27.1-4544 | HOSE OIL TANK OVERFILL DRAIN | 1 | |
| 2705-3 | INSTALLATION TOOL - HELI-COIL® | 1 | |
| 2705-4 | HELICOIL THREAD REPAIRING TOOL 1/4" UNF | 2 | |
| 2705-6 | HELICOIL INSERT INSTALLATION TOOL | 2 | |
| 2795-11 | HELI-COIL (INSTALLATION TOOL) | 1 | |
| 28-0-2758A | OIL GUN HAND OILING | 1 | |
| 28-0-4891 | ADAPTER TORQ IDG OIL LINE TAY | 2 | |
| 28.14.9200.250.000 | AIR-CONDITIONING SYSTEM COMPRESSOR OIL LEVEL INDICATOR | 1 | |
| 284566-1-1 | COVER OIL INLET, TORQUE CALIBRATION | 1 | |
| 287071-1 | DRIVER,OIL PUMP SEAL INST | 1 | |
| 29-90-114-10 | SCREW DRIVER FOR TOILET SHROUD R/I TASK 38-32-01-400-843-003 TOILET SHROUD INSTALLATION(CUSTOM CHECK ) | 3 | |
| 294866-5 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860165-1 OIL PUMP SPUR GEAR FROM 358027 BEARINGS) | 1 | |
| 294870-3 | BEARING REMOVAL PLATE (SUPPORTS 358027 BEARING WHEN REMOVING 3860165-1 OIL PUMP SPUR GEAR FROM BEARING) | 1 | |
| 294881-3 | ROTOR AND BEARING MECHANICAL PULLER (REMOVES OIL SLINGER ROTOR AND BEARING FROM COUPLING (ALTERNATE TO 294881-1)) | 1 | |
| 298045-1 | OIL RESTRICTOR DRIVER AND SWAGING TOOL | 1 | |
| 2C14062G01 | PULLER, NO.4B FORWARD INNER RACE AND ROTATING AIR/OIL SEAL | 1 | |
| 2C14648G01 | PULLER , NO.1 BEARING AND AIR/OIL SEAL | 2 | |
| 2C14648P02 | PULLER #1 BEARING AND AIR-OIL SEAL | 1 | |
| 2C14648P03 | PULLER # 1 BEARING AND AIR-OIL SEAL | 1 | |
| 2C14648P05 | PULLER # 1 BEARING AND AIR-OIL SEAL | 1 | |
| 2C14648P06 | PULLER # 1 BEARING AND AIR-OIL SEAL | 1 | |
| 2C14669G01 | PULLER, NO. 4R BEARING INNER RACE, ROTATING AIR, OIL SEAL, AND NO. 4B BEARING | 3 | |
| 2C14669G02 | PULLER, NO. 4R BEARING INNER RACE, ROTATING AIR, OIL SEAL, AND NO. 4B BEARING FWD RACE ( PULLER ) | 1 | |
| 2C14740 | PULLER, STATION AIR/OIL SEAL - NO. 1 BEARING | 1 | |
| 2C14740 REV C | PULLER, STATION AIR/OIL SEAL - NO. 1 BEARING | 1 | |
| 2C14740G01 | PULLER, STATIONARY AIROIL SEAL-#1 BEARING | 2 | |
| 2C14740G01TK | PULLER, STATIONARY AIR/OIL SEL-NO.1 BEARING | 1 | |
| 2C14790G01 | SET- CONCETRICITY JOIN AIR & OIL | 2 | |
| 2C18118 | 4R BEARING STATIONARY AIR/OIL SEAL GAGE FIXTURE | 1 | |
| 2C6009 | PULLER, ADAPTER- NO 4 BRG ROTATING AIR & OIL SEAL | 2 | |
| 2C6120 | PUSHER, INNER RACE, SPACER, AIR & OIL SEAL | 1 | |
| 2C6120 REV D | PUSHER, INNER RACE, SPACER, AIR & OIL SEAL | 1 | |
| 2C6120G02 | PUSHER INNER RACE SPACER AIROIL SEAL #1 BEARING | 2 | |
| 2C6120G02TK | PUSHER, INNER RACE-SPACER-AIR AND OIL SEAL-NO.1 BRG. | 1 | |
| 2C6262 | PULLER,INNER RACE,SPACER,AIR&OIL SEAL #1 BEARING | 1 | |
| 2C6262G04 | PULLER INNER RACES, SPACER, AIR AND OIL SEAL - NO. 1 BEARING | 1 | |
| 2C6615G02 | INSTALLATION TOOL ACCY GEARBOX OIL SEAL | 2 | |
| 2C8040JW97247 | CONCENTRICITY #3 BEARING STATIONARY AIR & OIL SEAL | 1 | |
| 2C81035 | CART - SERVICING - STARTER OIL | 1 | |
| 2C81035G01 | Starter Oil−Servicing Cart | 2 | |
| 2C81035G02 | Starter Oil−Servicing Cart | 2 | |
| 2C81169G02 | PULLER, NO. 4 OIL SEAL AND INNER RACE | 1 | |
| 2C81413G02 | PULLER, HPT ROTOR NO. 4 OIL ROTATING SEAL | 1 | |
| 2C81571G01 | COVER, OIL FLOW NO. 5 HOUSING | 1 | |
| 2C81608G01 | FIX.,INST.-RETAINING RING OIL TR.POR | 1 | |
| 2C81663P01 | ADAPTER, INSTALL, AIR/OIL SEPA | 1 | |
| 2C81703P01 | ENGINE GROUND OIL SEAL EQUIPMENT | 1 | |
| 2C91097G01 | FIXTURE - OIL TANK HOLDING | 1 | |
| 2C91354 | FIXT, HOLDING-SENSOR BYPASS FILTER, OIL | 1 | |
| 2C91354G01 | Holding Fixture − Oil Filter By− Pass Sensor (Alternate) | 5 | |
| 2C91354G02 | Holding Fixture − Oil Filter By− Pass Sensor (Recommended) | 10 | |
| 2F10366 | Adapter, Airflow (Outlet) - Engine Assy, No. 5 Brg. Compartment Cover, Installation & Oil Scavenget Outer, TEC | 1 | |
| 2G7839 | IGB & TAIL ROTOR GEAR BOX OIL DRAINING HOSE | 1 | |
| 2G8924 | OIL DRAINING TOOL | 1 | |
| 2KPRF-6 | HELICOIL INSTALLATION TOOL / KIT | 2 | |
| 2MIT65B02310-1 | MISCELLANEOUS TOOL - INBOARD SPOILER ACTUATOR LOCKING TOOL, NUMBER 6 AND 7 | 5 | |
| 2MIT65B90115 | ADAPTER - OIL SYSTEM DIFFERENTIAL PRESSURE SWITCH, RB211 ENGINE | 1 | |
| 3-8-24UHF FOR 3/8 24 755-6M | HELICOIL HAND INSERTING TOOL | 1 | |
| 3/8-24-UNF-HELICOIL | HELICOIL INST. TOOL | 1 | |
| 30 PPM | CALIBRATING OIL STANDARD 2 (8 OZ/ BOTTLE) | 1 | |
| 30-40 | MOTOR DRIVEN PUMP MGB OIL DRAINING | 5 | |
| 30027-0000-02 | ENGINE OIL LEVEL | 2 | |
| 3075323-3 | OIL FILTER BY-PASS INDICATOR | 6 | |
| 30E54-1 | HOUSING, OIL COOLER | 1 | |
| 30R0253G02 | (RT) KIT - OIL TANK MNT INSTALL/REMV | 1 | |
| 31-590-100 | TOOL - OIL DRAINING, THS ACTUATOR | 2 | |
| 3114352-01 | OIL SEAL RETAINING RING HALF UPER | 1 | |
| 3114353-01 | OIL SEAL RETAINING RING HALF LOWER | 1 | |
| 312-03919-003-W26H | TUBE, LANDING GEAR OIL SUPPLY | 1 | |
| 3144-3 | 10-32 HELI-COIL F/R TWINSERT KIT | 1 | |
| 314STD-79-0001 | OIL – REPLACEMENT OF THE OIL COOLER MOUNTING SUPPORT BOLTS | 1 | |
| 3179-4 | HELI-COIL LKG TWINSERT KITS | 2 | |
| 3179-7 | HELICOIL TWINSERT KIT THREAD REPAIR KIT | 2 | |
| 3230A0000-01 | OIL DOSING UNIT | 4 | |
| 3240-D09-1212 | TEST SPOILER SPIN UP SYST | 3 | |
| 3240D09-1212 | SPOILER SPINUP | 3 | |
| 325-0011-01 | TOILET WATER DRAIN V/V LEAK TEST | 14 | |
| 332A93361020 | TGB OIL DRAIN LINE | 1 | |
| 3364/54 | HOSE-OIL TANK ,CART - SERVICING, ENGINE OIL COM-1537 | 1 | |
| 33692-6 | HELI-COIL FINISHING TAP, HELI-COIL INSTALLATION TOOL, HELI-COIL TANG BRAKE OFF TOOL | 1 | |
| 3404000-1 | PLUG SET ASSY OIL COOLERINTAKE | 1 | |
| 350A95-3200-00 | OIL SAMPLING TOOL | 1 | |
| 350A95-3200-00/PHP | SAMPLING TOOL SET OIL | 1 | |
| 350A95320000 | SAMPLING TOOL SET OIL | 1 | |
| 350A96-3205-01 | BLANKING MGB OIL PUMP (ICO 13-63-20-02-10) | 1 | |
| 350A96-3205-01/PHP | OIL PUMP BLANKING PLATE | 1 | |
| 350A96-3210-00 | OIL PUMP BLANKING | 1 | |
| 350A96320501 | BLANKING MGB OIL PUMP | 1 | |
| 3520-0610-03 | MOUNTING RAIL X CAPABILITY BOILER 350 | 1 | |
| 355M03210000 | CHECKING OIL | 2 | |
| 3571222-2002 | INDICATOR, OIL PRESSURE | 1 | |
| 3591-3CN285 | HELI-COIL INSERT | 2 | |
| 3591-4CN0250 | INSERT HELICAL COIL | 5 | |
| 3591-8CN750 | HELI-COIL INSERT | 2 | |
| 3688-04 | HELICOIL STANDARD INSERT 3B GO-HI GAGE | 1 | |
| 3688-6 | HELI-COIL GAGING WORKING | 1 | |
| 3688-8 | HELI-COIL GAGING WORKING | 1 | |
| 3692-6 | HELI-COIL FINISHING TAP, HELI-COIL INSTALLATION TOOL, HELI-COIL TANG BRAKE OFF TOOL | 2 | |
| 3694-3 | HELICOIL STANDARD INSERT 3B TGREAD GO-HI GAGE | 1 | |
| 3694-6 | HELICOIL STANDARD INSERT 3B THREAD GO-HI GAGE | 1 | |
| 3695-6 | TOOL FOR REMOVAL OF THE TANG ON INSTALLED HELICAL-COIL INSERTS | 2 | |
| 3724-10 | HELI-COIL INSERTING TOOL | 1 | |
| 3724-12 | HELI-COIL INSERTING TOOL | 1 | |
| 38585 8 X 14 | WASHER DIN988 8X14X0.5 SPRING ST OIL HRC 44-49 | 1 | |
| 38590 8 X 14 | WASHER DIN988 8X14X1 SPRING ST OIL HRC 44-49 | 1 | |
| 3887-06 | 6-32 HELICOIL TWINS BOTTOMING TAP | 1 | |
| 3891-8CN750 | HELI-COIL INSERT (OVERSIZE) | 1 | |
| 3893-3 | 10-32 HELICOIL TWINSERT BOTTOMING TAP | 1 | |
| 3893-4 | 1/4-28 HELICOIL TWINSERT BOTTOMING TAP | 2 | |
| 390-59001-0035 | SPOILER RING AID | 1 | |
| 390700GSE1-1001 | COLLAR-SPOILER ALIGNMENT / INSTALLATION TOOL | 7 | |
| 39703-2 | ELEMENT,FILTR,OIL,SPIN-ON | 1 | |
| 3993-6 | 3/8-24 HELICOIL TWINSERT BOTTOMING TAP | 2 | |
| 3A103-5E | BOLT OIL IN | 1 | |
| 3AA3600 | BOTTLE - NITROGEN CART - SERVICING, STRUT OIL INFLATOR - STRUT, LANDING GEAR GAUGE - PRESSURE, 0-3000 PSIG (0-20685 KPA) WRENCH - TORQUE BUCKET - 2.5 GALLON CAPACITY | 1 | |
| 3FBB | HELICOIL 10 UNF THREAD REPAIR TAP - BOTTOMING | 6 | |
| 3G 1200G00331 | HOSE MGB OIL DRAINING | 1 | |
| 3G 120500231 | ADAPTOR, M/R DAMPER OIL FILLING | 1 | |
| 3G 1205800332 | HOSE MGB OIL DRAINING | 1 | |
| 3G 1205G00231 | ADAPTER, M/R DAMPER OIL FILLING | 2 | |
| 3G1200G00331 | HOSE, MGB OIL DRAINING | 1 | |
| 3G1205800332 | HOSE, MGB OIL DRAINING | 1 | |
| 3G1205G00231 | ADAPTER M/R DAMPER OIL FILLING | 2 | |
| 3G1205G00332 | MAIN GEAR BOX OIL DRAINING HOSE | 1 | |
| 3G6305G01132 | TOOL KIT, MAIN GEAR BOX OIL PUMP DISASSEMBLY/ASSEM | 1 | |
| 3GZZ300019 | MGB OIL COOLING FAN REMOVAL | 1 | |
| 3MIT65B02300-1 | MISCELLANEOUS TOOL - INBOARD SPOILER ACTUATOR LOCKING TOOL, NUMBER 5 AND 8 | 1 | |
| 3mit65b02300-1 | SPOILER ACTUATOR LOCKING TOOL | 1 | |
| 4032-06 | TOOL FOR REMOVAL OF THE TANG ON INSTALLED HELICAL-COIL INSERTS | 1 | |
| 4032-3 | HELI-COIL EXTRACTING | 1 | |
| 4032-4 | HELI-COIL TWINSERT TANG BREAK-OFF TOOL FOR OUTER INSERT | 2 | |
| 4032-6 | HELICOIL OUTER INSERT TANG BREAK-OFF TOOL | 2 | |
| 4045T7 | SAFETY CONTAINER FOR OILY WASTE, STEEL, FLIP UP LID, 2 GALLON CAPACITY – MCMASTER-CARR | 1 | |
| 408-100 | ENGINE/OIL COOLER INLET PLUGS (set of 4) | 1 | |
| 40KIT6002 | CONTAINER - OIL RESISTANT, 1 U.S.-GAL (3.8 L) | 1 | |
| 412-107 | OIL COOLER INLET PLUGS (set of 2) | 1 | |
| 414-101 | OIL COOLER INLET PLUGS (below engine nacelle, specify size) (set of 2) | 1 | |
| 414900GSE1-1001 | CLAMP LOCKING SPOILER ACTUATOR | 11 | |
| 41500167700/10 | HERLICOIL PLUS INSTALLAYOION MANDREL UNF 6-4 | 1 | |
| 4186 101 9001 | HELICOIL FREE RUNNING REPAIR KIT UNF 4-48 - 1/4-28 | 1 | |
| 420B03 | OIL INJECTOR | 1 | |
| 425-101 | OIL COOLER INLET PLUGS (on cowl side) (set of 2) | 1 | |
| 441-110 | OIL COOLER/GEN AIR INLET PLUGS (on nacelle belly) (set of 2) | 1 | |
| 450S-00-1-2-1-01-1-1-1-AD | 15 GALLON TURBINE OIL DISPENSER MODEL 450 | 1 | |
| 456800GSE1-1001 | CLAMP - PCU LOCKING, SPOILER | 1 | |
| 460003035-3 | ADAPTOR - ONE WAY VALVE OIL FILLING | 4 | |
| 51129001 | AFT TOILET DRAIN CAP | 1 | |
| 460005513 | ADAPTOR-OIL FILLING NOSE OLEO | 5 | |
| 41500167700 | HERLICOIL PLUS INSTALLAYOION MANDREL UNF 6-4 | 1 | |
| 4691-3CNW190 | HELI-COIL TWINS INNER | 1 | |
| 4691-4CN-464 | HELICOIL NO. 4691-4CN-464 (INNER) | 1 | |
| 4691-4CN464 | HELICOIL NO. 4691-4CN-464 INNER | 1 | |
| 4691-6CN333 | HELI-COIL TWINS INNER | 1 | |
| 4709-3 | COUPLING, TOILET FLUSH | 6 | |
| 4916760-1 | Adapter – Torque,Flight Spoiler Cylinder Gland | 1 | |
| 4FBB | HELICOIL KIT ¼-28 BOTTOMING TAP | 5 | |
| 50 PPM | CALIBRATING OIL STANDARD 2 (8 OZ/ BOTTLE) | 1 | |
| 5001005-1 | CONTAINER - 1 QUART, OIL/FUEL RESISTANT | 1 | |
| 50U639 | ELBOW MAIN FILTER OIL TUBE | 1 | |
| 5120-01-137-3557 | OIL TUBE FIXTURE PACKAGING: D-LM-008-036/SF-000 QAC:C | 1 | |
| 5193-6 | HELICOIL-FINICHING TOP | 1 | |
| 520-2 | HELI-COIL EXPANDING TOOL NO. 520-2 | 3 | |
| 528-2 8-32 UNC | HELICOIL INSTALLATION TOOL | 1 | |
| 53023-T203 | OIL RESERVOIR MOUNTING FLANGE | 1 | |
| 532744382 | TOOL OIL FILLING THS ACTOU190363 | 1 | |
| 532763716 | SPOILER MAINT TOOL | 1 | |
| 535-10 | INSTALLATION TOOL - HELI-COIL | 2 | |
| 535-16 | INSTALLATION TOOL - HELI-COIL | 2 | |
| 535-9 | HELICOIL INSTALL TOOL | 3 | |
| 5402-2 | HELICOIL INSERT TOOL | 4 | |
| 5402-3 | HELICOIL INSERT TOOL | 7 | |
| 5402-4 | HELICOIL INSERT TOOL | 7 | |
| 5402-5 | HELICOIL INSERT TOOL | 4 | |
| 5402-6 | HELICOIL INSERT TOOL | 3 | |
| 5402-7 | HELICOIL INSERT TOOL | 2 | |
| 5402-8 | HELICOIL INSERT TOOL | 5 | |
| 56134518 | OIL DRAIN HOSE | 1 | |
| 56193-3-2 | 10-32 OVSZ HELI-COIL BOTTOMING | 3 | |
| 56193-4-2 | HELI-COIL OVERSIZE BOTTOMING TAP. | 2 | |
| 5836072-4 | ENGINE OIL FILTER ANALYSIS KIT | 1 | |
| 59521A3000-01 | KEY - SPOILER MAINTENANCE | 2 | |
| 5CBA | HELICOIL HAND INSERTING TOOL, STRAGHT FLUTE TAP | 1 | |
| 5CPA | HELICOIL HAND INSERTING TOOL, HAND TAP | 1 | |
| 5FBB | HELICOIL KIT 5/16-24 BOTTOMING TAP | 1 | |
| 5MIT65B02300 | LOCK,INBD SPOILER | 1 | |
| 5MIT65B02310 | LOCK,INBD SPOILER | 1 | |
| 5SE01764-1 | BRACKET, C-SUMP OIL SCAVENGE LINES PROTECTOR | 1 | |
| 600-306-842 | HELICOIL INSERT TOOL | 1 | |
| 600-307-910 | HELICOIL INSERT TOOL | 1 | |
| 61A108J1 - 1 | SERVICING UNIT PRE OILER | 1 | |
| 61A108J1-1 | SERVICING UNIT,PRE-OILER | 1 | |
| 627-290 | HELICOIL INSERT M8X1.25 X 8 MM LG INOX 18-8 | 1 | |
| 627A170-A | 1#&2# MULTI-FUNCTION SPOILER LOCKING RING | 1 | |
| 627A180-A | 3# MULTI-FUNCTION SPOILER LOCKING RING | 1 | |
| 627A190-A | GROUND SPOILER LOCKING RING | 1 | |
| 628A020-C | FUEL OIL SAMPLING EQUIPMENT | 1 | |
| 629A050-A | HYDRAULIC OIL SAMPLING TOOL | 1 | |
| 65-90305-59 | CFM56-3 MAIN OIL SUP | 2 | |
| 65-90305-59 | MAIN OIL SUPPLY FILTER | 2 | |
| 65-90305-86 | ENGINE OIL FILTER | 2 | |
| 6504K11 | STAINLESS STEEL TIE WIRE ¿0.032 1LB. COILS-362FT | 1 | |
| 65375AB351M | CLE A ERGOTS LIAISION MAT/VOILURE LUG WRENCH-PYLON-TO-WING JUNCTION | 1 | |
| 67259-187-101 | MANDREL FOR FITTING MOUNTING PLATE OIL SEAL TO ROTOR SHAFT | 1 | |
| 674347242 | GROUND INTERPHONE COILED CORD | 1 | |
| 61463686770 | FINE INDIA OIL STONE, COM-21826 | 1 | |
| 6CBA | HELICOIL HAND INSERTING TOOL, HAND TAP | 1 | |
| 6F3240G00131 | TOOL, WBR OIL DRAINING | 1 | |
| 6FBB | HELICOIL BOTTOMING TAP | 1 | |
| 6FPB | HELICOIL OR HELICOIL BOTTOMING TAP | 1 | |
| 6MIT65-72710-39 (F72912-8) | IND SPOILER LOCK (SPOILER 5&10) | 1 | |
| 6SF4488-72-60SW | DRILL MAIN OIL SCREEN JIG | 1 | |
| 70-9023-00 | COIL SPRING TORQUE ADAPTER | 1 | |
| 7000-6244 | OIL SERVICING UNIT MLG-A320A / 340 | 1 | |
| 7010-3 | TREATING COIL | 2 | |
| 7011WF150-1 | DEVICE FOR OIL SERVICE / REFUELING IN THE DRIVE | 1 | |
| 703A95-0200-02 | HOSE DRAINAGE OIL ENGINE | 1 | |
| 703A95-0500-02 | HOSE ASS MGB OIL DRAIN | 1 | |
| 703A95-0507-00 | MAIN GEAR BOX OIL DUMP TUBE, TOOL | 1 | |
| 703A95-0520-0 | Drain Tool Engine/Oil Tank/ Hydraulic | 1 | |
| 703A95-0520-01 | HOSE DRAINAGE OIL ENGINE | 1 | |
| 703A95-0520-01/PHP | HOSE, DRAINAGE, OIL, ENGINE | 1 | |
| 703A95-0533-00 | DRAIN HOSE ENGINE OIL [EC155] | 1 | |
| 703A950500.02 | HOSE, OIL DRAIN | 1 | |
| 703A95050500 | HOSE DRAINAGE OIL MGB AND TGB | 2 | |
| 703A95050700 | MAIN GEAR BOX OIL DUMP TUBE, TOOL | 1 | |
| 703A95052001 | HOSE DRAINAGE OIL ENGINE | 1 | |
| 703A95053000 | TGB OIL DRAIN HOSE | 1 | |
| 703A95053100 | MGB OIL DRAIN HOSE | 1 | |
| 703А95-0505-00 | OIL DRAIN HOSE FROM MGB/TGB | 1 | |
| 703А95-0508-00 | OIL DRAIN HOSE FROM MGB | 1 | |
| 706A34542008 | OIL DRAIN VALVE | 1 | |
| 71707021 | GUN - 1/4 HYDRAULIC SYSTEM OIL REPLENISHING | 1 | |
| 7170S | REOILING PUMPS PR SKYDROL | 1 | |
| 7218-RISBRIDGER | HANDHELD ENGINE OIL REPLENISHING PUMP | 1 | |
| 73-0067-02 | ENGINE GROUND OIL SEAL EQUIPMENT | 1 | |
| 736-013 | MALABAR 736-013 REPLACEMNET OIL SERVICING COUPLING | 3 | |
| 74-110-10 | OIL QUANTITY INDICATOR | 1 | |
| 7511-2 | HELICOIL INSTALLATION TOOLS | 1 | |
| 753970A | VISUAL INSPECTION OF THE IDG FOR OIL | 3 | |
| 7551-04 | HELICOIL INSERT INSTALLATION TOOL 4-40 UNC | 2 | |
| 7551-05 | HELICOIL INSTALLATION TOOL | 1 | |
| 7551-06 | TOOL FOR INSTALLATION OF OUTER TWINSERT COILS | 6 | |
| 7551-06 & 7511-2 | HELICOIL INSTALLATION TOOLS | 1 | |
| 7551-2 | HELICOIL INSTALLATION TOOL | 8 | |
| 7551-6 | HELI-COIL INSERTING TOOL | 1 | |
| 7551-8 | HELI-COIL INSERTING TOOL | 1 | |
| 75515M | HELICOIL HAND INSERTING TOOL, PREWINDER | 1 | |
| 75516M | HELICOIL HAND INSERTING TOOL, PREWINDER | 1 | |
| 7552-3 | HELICOIL INSTALATION | 4 | |
| 7552-4 | HELO-COIL INSTALLATION TOOL | 9 | |
| 7552-6 | HELICOIL INSTALLATION TOOL | 2 | |
| 7552-8 | HELICOIL INSTALL TOOL | 3 | |
| 78100011534 | KIT - RIGGING SPOILER/AILERON (CLINOMETER) | 1 | |
| 79-0016-01 | Oil Pressure Indication Trouble Shooting Test Unit | 1 | |
| 79000194-1 | OIL COOLING ADAPTER | 1 | |
| 79000494-1 | VBV OILING GUN CONNECTOR | 3 | |
| 7B7262001-4 | HIILITIIVISTEEN IRROITIN DEOILERIN | 1 | |
| 7FBB | HELICOIL KIT 7/16-20 BOTTOMING TAP | 1 | |
| 7FPB | FINISHING TAP (HELI COIL) | 1 | |
| 810750G1 | OIL SERVICING CART PMU-27 | 1 | |
| 81204202-9 | Bearing Oil Jet | 1 | |
| 82-05-007 | MIN 7 FOIL SET | 1 | |
| 82740010 | RIGGING TOOL - ALIGNMENT OF THE ROLL SPOILER ACTUATOR | 1 | |
| 82740010-001-58 | RIGGING TOOL - ALIGNMENT OF THE ROLL SPOILER ACTUATOR | 2 | |
| 831044-1 | KIT, OIL SAMPLING | 3 | |
| 833978-1 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860165-1 OIL PUMP SPUR GEAR FROM 358027 BEARINGS) | 1 | |
| 8489-55-L | LUBRICATING OIL SERVICE EQUIPMENT | 1 | |
| 8552-3 | HELICAL COIL POWER PREWINDER | 1 | |
| 85643011P01 | PLUG， PULLER - AFT ROTATING AIR/OIL SEAL | 1 | |
| 856A 2355P01 | PIN LOCATING AFT OIL SUMP | 1 | |
| 856A-2502-G01 | Adapter, Drain Oil tank | 2 | |
| 856A-2502-G06 | Adapter, Drain Oil tank | 13 | |
| 856A1216 | PULLER-NO4 BEARING OUTER RACE, OIL SEAL & AIR DUCT | 2 | |
| 856A1216 G02 | PULLER - NO. 4 BEARING OUTER RACE, OIL SEAL AND AI | 12 | |
| 856A1216G01 | PULLER-NO4 BEARING OUTER RACE, OIL SEAL & AIR DUCT | 3 | |
| 856A1216G02 | Puller - No. 4 Bearing Outer Race, Oil Seal and Air Duct (puller) | 12 | |
| 856A1216G03 | PULLER-NO4 BEARING OUTER RACE, OIL SEAL & AIR DUCT | 1 | |
| 856A2336 | PULLER FWD ROTATING AIR/OIL SEP | 1 | |
| 856A2336G02 | Puller Fwd Rotating Air/Oil | 6 | |
| 856A2355P01 | PIN, LOCATING - AFT OIL SUMP (LOCATING PIN | 1 | |
| 856A2372G01 | PROTECTOR, REAR INNER OIL SEAL | 2 | |
| 856A2375 | PULLER, HYDRAULIC-REAR ROTATING AIR/OIL SEAL | 1 | |
| 856A2375G01 | PULLER, HYDRAULIC - REAR ROTATING AIR/OIL SEAL (PULLER) | 1 | |
| 856A2375G02 | PULLER HYDRULIC REAR ROTATING AIR/OIL SEAL | 1 | |
| 856A2378G01 | FIXT PUSH/PULL OIL INLET TUBE | 1 | |
| 856A2404G01 | Drain Oil Tube | 1 | |
| 856A2404G02 | CRIMPING TOOL DRAIN OIL TUBE | 1 | |
| 856A2502 | ADAPTER,DRAIN-OIL TANK | 3 | |
| 856A2502 G06 | Adapter‐DrainOil Tank | 13 | |
| 856A2502 REV H | ADAPTER, DRAIN-OIL TANK OUTILLAGE DE VIDANGE | 1 | |
| 856A2502G02 | ADAPTER,DRAIN-OIL TANK | 1 | |
| 856A2502G06 | ADAPTER DRAIN -OIL TANK | 13 | |
| 856A2604 | PULLER, AFT ROTATING AIR-OIL SEPARATOR | 1 | |
| 856A2604 G01 | Puller ‐ Aft Rotating Air/Oil Separator | 1 | |
| 856A2604 REV A | PULLER, AFT ROTATING AIR-OIL SEPARATOR | 1 | |
| 856A2604G01 | PULLER - AFT ROTATING AIR/OIL SEPARATOR (PULLER) | 1 | |
| 856A2640 | TOOL SET ASSEMBLY - RING OIL SEPARATOR (TOOL SET) | 1 | |
| 856A2640 G01 | Tool Set Assembly ‐ Ring Oil Separator | 8 | |
| 856A2640G01 | Tool Set Assembly - Ring Oil Separator (tool set) | 8 | |
| 856A2661 | PULLER AFT ROTATING AIR/OIL | 3 | |
| 856A2661 G01 | Puller ‐ Aft Rotating Air/Oil Separator | 14 | |
| 856A2661G01 | PULLER - AFT ROTATING AIR/OIL | 14 | |
| 856A2661G02 | PULLER - AFT ROTATING AIR/OIL SEPARATOR (PULLER) | 1 | |
| 856A2661G03 | PULLER - AFT ROTATING AIR/OIL SEPARATOR (PULLER) | 1 | |
| 856A2685 | ADAPTER, PULLER - OIL INLET COVER (PULLER ADAPTER) | 1 | |
| 856A2685G02 | PULLER ADAPTER - OIL INLET COVER | 1 | |
| 856A2685G03 | PULLER ADAPTER - OIL INLET COVER | 5 | |
| 856A2693G02 | PULLER - AFT ROTATING AIR/OIL SEPARA | 4 | |
| 856A2731G02 | TGB OIL JET TARGETING TOOL | 7 | |
| 856A2735 | TARGETTING TOOL SET - OIL NOZZLE | 1 | |
| 856A2735G01 | TARGETTING TOOL SET - OIL NOZZLE | 2 | |
| 856A2736G01 | TOOL SET, TARGET - OIL NOZZLES IMPINGEMENT TEST, TGB (TARGET TOOL SET) | 2 | |
| 856A2736G02 | TOOLSET, TARGET - OIL NOZZLES IMPINGEMENT TEST, TGB (TARGET TOOL SET) - | 3 | |
| 856A2764G01 | HEATER - LPT FWD ROTATING OIL SEAL | 1 | |
| 856A2764G02 | HEATER - LPT FWD ROTATING OIL SEAL | 1 | |
| 856A2764G03 | HEATER - LPT FWD ROTATING OIL SEAL | 1 | |
| 856A2764G04 | HEATER - LPT FWD ROTATING OIL SEAL | 1 | |
| 856A2764G05 | HEATER - LPT FWD ROTATING OIL SEAL | 3 | |
| 856A2764G06 | HEATER - LPT FWD ROTATING OIL SEAL | 2 | |
| 856A2775G01 | PULLER, OIL SUMP ASSEMBLY AND AIR HEATING COVER | 4 | |
| 856A2789G01 | RING, CENTERING - REAR ROTATING AIR AND OIL SEALS ON LPT SHAFT (CENTERING RING) | 1 | |
| 856A2789G02 | Ring, Centering - Rear Rotating Air and Oil Seals on LPT Shaft (centering ring) | 4 | |
| 856A2790 | TOOL SET,DRYING AND RELUBRICATION-ENGINE OIL SUMPS | 1 | |
| 856A2799 | TOOL SET, OIL DIST. LINE 7 AGB. | 1 | |
| 856A2799G01 | TOOL SET, OIL DIST, LINE 7 AGB | 4 | |
| 856A2873G01 | INSTALLATION FIXTURE - OIL | 2 | |
| 856A2912G02 | REMOVAL/INSTALLATION, SEALOIL AND MA | 3 | |
| 856A2920G02 | TOOL SET, HOLDING - AIR/OIL SEPARATOR TORLON DUCTS | 3 | |
| 856A2921 | TEMPLATE LOCATING N1 2 BRG OIL S | 1 | |
| 856A2921G01 | Template, Locating - No. 1 and No. 2 Bearings Oil Supply Tubes (locating template) | 6 | |
| 856A2943 | SLEEVE, PROTECT - REAR INNER ROT AIR/OIL SEAL | 1 | |
| 856A2943 G01 | Sleeve Protection ‐ Rear Inner Rotating Air/Oil | 9 | |
| 856A2943G01 | SLEEVE, PROTECTION-REAR INNER ROTATING AIR/OIL SEAL | 9 | |
| 856A2943G03 | SLEEVE, PROTECT - REAR INNER ROT AIR/OIL SEAL | 1 | |
| 856A2957G01 | ASSEMBLY/DISASSEMBLY OIL SCAVENGE FILTER HOUSING | 8 | |
| 856A2961 | INSTALL/REMOVE TOOL SEAL OIL & AGNETIC SEALAGB | 1 | |
| 856A2969G01 | TOOL SET , TARGET - AGB OIL NOZZLE IMPINGEMENT CHECK | 3 | |
| 856A2971 | REM/INST SEALOIL AND MAGNETIC SEAL AGB INST/DEMONT | 1 | |
| 856A2979 | TOOL SET - TARGET - AGB OIL NOZZLE (LINE N? 2) AIR IMPINGEMENT CHECK | 1 | |
| 856A2979G02 | AGB OIL NOZZLE IMPINGEMENT CHECK TOOL | 2 | |
| 856A3009P01 | WRENCH - #2 BRG AIR/OIL SEAL RETAINER | 1 | |
| 856A3011 | PLUG, PULLER - AFT ROTATING AIR/OIL SEAL (PULLER PLUG) | 1 | |
| 856A3011 P01 | Plug Puller ‐ Aft Rotating Air/Oil Seal | 10 | |
| 856A3011P01 | Plug, Puller - Aft Rotating Air/Oil Seal (puller plug) | 10 | |
| 856A3014 | WRENCH FWD ROTATING AIR/OIL | 1 | |
| 856A3014G02 | WRENCH - FORWARD ROTATING AIR/OIL SEPARATOR NUT | 1 | |
| 856A3034 | PULLER ROTATING AIR/OIL SEPARATOR | 1 | |
| 856A3034 G04 | Puller Forward Rotating Air/Oil Separator | 2 | |
| 856A3034G01 | FWD ROTATING AIR/OIL SEP | 1 | |
| 856A3034G04 | FORWARD ROTATING AIR/OIL SEPARATOR PULLER | 2 | |
| 856A3034G05 | PULLER ROTATING AIR/OIL SEPARATOR | 3 | |
| 856A3062 | PULLER REAR ROTATING AIR/OIL SEAL | 1 | |
| 856A3062 G02 | Puller Hydraulic ‐ Rear Rotating Air/Oil Sleeve | 6 | |
| 856A3062G01 | PULLER, HYDRAULIC - REAR ROTATING AIR/OIL SLEEVE (PULLER) | 1 | |
| 856A3062G02 | Puller, Hydraulic - Rear Rotating Air/Oil Sleeve (puller) | 6 | |
| 856A3062G03 | PULLER REAR ROTATING AIR/OIL SEAL | 1 | |
| 856A3265G04 | MACHING FIXTURE FOR OIL DAMPER NO.5 BEARING | 4 | |
| 856A3272 | PULL #4 BRG ROTATING OIL SEAL | 1 | |
| 856A3272 G01 | Puller ‐ No. 4 Bearing Forward Rotating Oil Seal | 5 | |
| 856A3272G01 | PULL #4 BRG ROTATING OIL SEAL | 5 | |
| 856A3328G01 | TOOL SET, ADAPTER - NO. 1 AND NO. 2 BEARING OIL NOZZLES AIR IMPINGEMENT (ADAPTER TOOL SET) | 5 | |
| 856A3330 | FITTING SEAL - AGB/TGB OIL NIPPLES | 1 | |
| 856A3330G01 | SEAL FITTING AGB TGB OIL NIPPLES & TUBES | 12 | |
| 856A3330P02 | TOOL SEAL FITTING AGB&TGB OIL | 2 | |
| 856A3392 | AFT ROTATING AIR/OIL SEPARATOR WRENCH TO | 2 | |
| 856A3392 G01 | Wrench Torque ‐ Aft Rotating Air/Oil Separator | 19 | |
| 856A3392G01 | Wrench, Torque - Aft Rotating Air/Oil Separator Nut (wrench) | 19 | |
| 856A3392G02 | TORQUE WRENCH - AFT ROTATING AIR/OIL SEPARATOR NUT | 1 | |
| 856A3419 | ADAPTER, PULLER - OIL INLET COVER | 2 | |
| 856A3419 G01 | Adapter Puller Cover Oil Inlet | 2 | |
| 856A3419 G02 | Adapter Puller ‐ Oil Inlet Cover & Major Module | 22 | |
| 856A3419 REV B | ADAPTER, PULLER COVER OIL INLET | 1 | |
| 856A3419G01 | ADAPTER, PULLER COVER OIL INLET | 2 | |
| 856A3419G02 | ADAPTER, PULLER COVER OIL INLET | 22 | |
| 856A3429 | TOOL, REMOVAL/INSTALLATION - OIL RESTRICTORS, AGB (REMOVAL/INSTALLATION TOOL) | 1 | |
| 856A3429G01 | Tool, Removal/Installation - Oil Restrictors, AGB (removal/installation tool) | 2 | |
| 856A3489 | MPINGEMENT TARGETTING SET - N 1 BRG OIL NOZZLE | 1 | |
| 856A3547 | Tool Set, Target Oil Nozzles Impingement Test, TGB | 1 | |
| 856A3548 | Tool Set, Target Oil Nozzles Impingement Test, AGB | 1 | |
| 856A3548G02 | IMPINGEMENT TEST TARGETTING SET - AGB OIL NOZZLES | 4 | |
| 856A3548G03 | IMPINGEMENT TEST TARGETTING SET - AGB OIL NOZZLES | 5 | |
| 856A3548G04 | IMPINGEMENT TEST TARGETTING SET - AGB OIL NOZZLES | 2 | |
| 856A3548G05 | Tool Set, Targets - AGB Oil Nozzles Air Impingement Checks (tool set) | 5 | |
| 856A3551G01 | Pusher Set, Removal/Installation, TGB Flanged Nipples and Oil Restrictors (pusher set) | 6 | |
| 856A3562 G02 | Tool Set Removal/Installation ‐ Oil Distributor | 1 | |
| 856A3570G03 | FORWARD ROTATING AIR/OIL SEPARATOR NUT WRENCH | 1 | |
| 856A3571 | WRENCH - FORWARD ROTATING AIR/OIL SEPARATOR NUT (WRENCH) | 1 | |
| 856A3571 G01 | Wrench ‐ Forward Rotating Air/Oil Separator Nut | 1 | |
| 856A3571G02 | Wrench - Forward Rotating Air / Oil Separator Nut | 13 | |
| 856A3601G01 | OIL DRAIN TOOL | 10 | |
| 856A3736 | TEMPLATE, LOCATING - DRAIN TUBE AND OIL BEARING 1 TUBE. | 1 | |
| 856A3736G01 | Template, Locating Drain Tube & Oil Bearing | 7 | |
| 856A3736G01 | TEMPLATE, LOCATING - DRAIN TUBE AND OIL SUPPLY TUBE | 7 | |
| 856A3739 | INSTALLATION FIXTURE - OIL NOZZLE N 2 BRG | 1 | |
| 856A3739G01 | Fixture Install Oil Nozzle Bearing 2 | 1 | |
| 856A3739G02 | Fixture, Installation - No. 2 Bearing Oil Nozzle (installation fixture) | 3 | |
| 856A3742 | TEMPLATE, LOCATING OIL TUBE NO#1 BEARING | 1 | |
| 856A3742G01 | Template. Locating Oil Tube No#1 Bearing | 3 | |
| 856A3745 | TGB OIL JET TARGETING TOOL | 1 | |
| 856A3745G01 | TGB Oil Het Targetting Tool | 1 | |
| 856A3745G02 | TGB Oil Jet Targetting Tool | 6 | |
| 856A3777G01 | TEMPLATE, LOCATING - OIL SUPPLY #3 BEARING SUPPORT | 3 | |
| 856A3777G02 | Template, Locating Oil Supply | 11 | |
| 856A3828 | TEMPLATE, ANGULAR POSITIONING AGB OIL SUPLLY NIPPLE ELBOW | 1 | |
| 856A3858G01 | INS/REM TOOL SET - OIL DISTRIBUTOR | 1 | |
| 856A3915 | PIN LOCATING AFT OIL SUMP | 1 | |
| 856A3915G01 | Pin, Locating - Oil Collector (pin) | 4 | |
| 856A3957G01 | KIT, BUSHING REMOVAL - OIL TANK | 1 | |
| 856A4026G02 | FIXTURE MACHINING NO. 3 BEARING FORWARD STATIONARY OIL SEAL | 1 | |
| 856A4027 | FIXT HOLDING BRG AFT OILSEAL | 1 | |
| 856A5202 | ADAPTOR DRAIN OIL TANK | 1 | |
| 856A5611G02 | FIXTURE WELDING OIL TUBES OF TURBINE FRAME | 2 | |
| 856A5690 | FITTING TOOL - OIL DISTRIBUTOR (40 TOOTH GEARSHAFT) - | 1 | |
| 856A5690G01 | FITTING TOOL - OIL DISTRIBUTOR (40 TEETH GEARSHAFT) | 1 | |
| 856A5691 | FITTING TOOL -OIL DISTRIBUTOR (31 TOOTH GEARSHAFT) | 1 | |
| 856A5691G01 | FITTING TOOL - OIL DISTRIBUTOR (31 TEETH GEARSHAFT) | 1 | |
| 856A5692 | EXTRACTING TOOL - OIL DISTRIBUTOR (40 TOOTH GEARSHAFT) | 1 | |
| 856A5692G01 | EXTRACTING TOOL - OIL DISTRIBUTOR (40 TEETH GEARSHAFT) | 1 | |
| 856A5693 | EXTRACTING TOOL-OIL DISTRIBUTOR | 1 | |
| 856A5693G01 | EXTRACTING TOOL - OIL DISTRIBUTOR (31 TEETH GEARSHAFT) | 1 | |
| 856A5820G01 | TOOL REMOVAL/INSTALL DISTRIBUTOR OIL GEAR 41 TOOTH | 1 | |
| 856A5822G01 | TOOL REMOVAL/INSTALL DISTRIBUTOR OIL GEAR 62 TOOTH | 1 | |
| 856A5823G01 | TOOL REMOVAL/INSTALL DISTRIBUTOR OIL GEAR 73 TOOTH | 1 | |
| 856A5824G01 | TOOL REMOVAL/INSTALL DISTRIBUTOR OIL GEAR 62 TOOTH | 1 | |
| 856A5825G01 | TOOL REMOVAL/INSTALL DISTRIBUTOR OIL GEAR 31 TOOTH | 1 | |
| 856A8050P01 | CHECKING SET - OIL DISTRIBUTOR | 1 | |
| 8774 | CART, SERVICE, LANDING GEAR STRUT, 35 US-GAL OIL CAPACITY, AIR OPERATED, 2GPM, 2,000PSIG HYD 3,500PSIG NITROGEN | 1 | |
| 877400B-1 | CART - SERVICING, OIL | 2 | |
| 8774B | CART, OIL, SERVICING | 2 | |
| 88019-100 | ENGINE OIL CART | 1 | |
| 8844 | CART - SERVICING, STRUT OIL COM | 9 | |
| 876489 | PULLER ASSY., FOR BALL BEARING 15*32*8., OIL INLET FLANGE OIL INLET COVER | 1 | |
| 876518 | INSERTION JIG FOR OIL SEAL 40*55*7 GEAR BOX COVER | 1 | |
| 877594 | PRESS-IN JIG FOR ROLLER BEARING 25*52*15 AND OIL SEAL 30*52*7 , FOR F2 | 1 | |
| 877615 | EXTRACTOR ASSY FOR ROLLER BEARING, OIL SEAL | 1 | |
| 877670 | CUTTING TOOL FOR OIL FILTER | 1 | |
| 8600138 | INTEGRATED DRIVE GENERATOR OIL-COOLER PROTECTIVE COVER | 1 | |
| 8600175 | PROTECTIVE COVER, MAIN GENERATOR OIL-COOLER | 3 | |
| 8600257 | GEARBOX MANUAL OIL FILL FUNNEL RH ENGINE | 2 | |
| 8812187000 | ENG OIL DRAIN PIPE | 2 | |
| 8816540000 | OIL PRESSURE TAPPING TUBE | 1 | |
| 8817027000 | TUBE, OIL PRESSURE TAPPING | 1 | |
| 8818171000 | OIL AND GAS SEPARATOR SEALING RING REMOVAL TOOL | 1 | |
| 8818836200 | OIL-GAS SEPARATOR SEALING PULLER | 1 | |
| 8819211111 | HELI-COIL INSTALLATION TOOL | 1 | |
| 8819451000 | ENGINE OIL DRAINING DEVICE | 2 | |
| 8819683000 | WRENCH (REMOVAL/INSTALLATION OF THE OIL FILTER COVER) | 4 | |
| 8819952000 | OIL-GAS SEPARATOR SEALING PULLER | 2 | |
| 860135950100000 | SIMULATOR - ENGINE OIL LOW PRESSURE | 1 | |
| 884400B-3 | CART - SERVICING, OIL | 2 | |
| 8844A | CART - SERVICINGSTRUT OIL | 2 | |
| 8844B | CART - SERVICING, STRUT OIL COM | 6 | |
| 89301 | PUMP - Reoiling pump Type 89301 | 1 | |
| 8BC345 | BOTTLE - NITROGEN CART - SERVICING, STRUT OIL INFLATOR - STRUT, LANDING GEAR GAUGE - PRESSURE, 0-3000 PSIG (0-20685 KPA) WRENCH - TORQUE BUCKET - 2.5 GALLON CAPACITY | 1 | |
| 8C2917 | FIXTURE, ALIGNMENT TUBE NO. 1 BEARING OIL SUPPLY | 1 | |
| 8FBB | HELICOIL KIT ½-20 BOTTOMING TAP | 1 | |
| 900 PPM | CALIBRATING OIL STANDARD 2 (8 OZ/ BOTTLE) | 1 | |
| 90261A162 | HELI COIL INSTALLATION TOOL 1/4-28 | 1 | |
| 90296A554 | HELICOIL 10-32 X .38 STAINLESS STEEL | 1 | |
| 905-14511 | INTERUPTER OIL COOLER SHAFT COUPLING AS332 | 1 | |
| 91-6739 | OIL DRAIN ATTACHMENT, ENGINE OIL TANK | 11 | |
| 910-0020 | XMSN OIL SYSTEM DRAIN TOOL | 1 | |
| 910-0022 | TGB OIL SYSTEM DRAIN TOOL | 1 | |
| 9122244 | CABLE, 6 FOOT LENGTH, BRIDGE COIL CONFIGURATION. 16 PIN LEMO TO FISCHER/LEMO TRIAX (SPO-6472) FOR EDDY CURRENT (NORTEC500S) | 3 | |
| 91709A154 | 3/8-24UNF HELICOIL INSERT TAP (CHAMFER) | 1 | |
| 91709A155 | 7/16-20 UNF HELICOIL INSERT TAP(CHAMFER) | 1 | |
| 91709A452 | 3/8-24UNF HELICOIL INSERT TAP (BOTTOMING) | 1 | |
| 91709A458 | 7/16-20 UNF HELICOIL INSERT TAP(BOTTOM) | 1 | |
| 91732A631 | HELICOIL INSERT M5 X 0.8 X 5 18-8 STAINLESS STEEL | 1 | |
| 91732A776 | HELICOIL INSERT M4 X 0.7 X 8 18-8 STAINLESS STEEL | 1 | |
| 9230259 | CABLE (16 PIN LEMO TO MICRODOT BALANCE COIL) | 2 | |
| 92A99107 | KIT - RIGGING SPOILER/AILERON (CLINOMETER) | 1 | |
| 92A99107-1 | KIT, RIGGING SPOIL/AILERON | 2 | |
| 93456X0000-04 | SPOILER MAINTENANCE KEY | 1 | |
| 9356720150 | OIL FLLING ASSY | 1 | |
| 9400M90 | KIT, CLEANING- TRF OIL SCAV | 1 | |
| 9400M90P01 | KIT, CLEANING-TRF OIL SCAV | 1 | |
| 9448M99 | OIL FLOW DRAIN CART | 1 | |
| 95011501-4000 | TOOLING: VACUUM TOILET LEAK TESTER | 1 | |
| 9501501-4000 | RECIRCULATING TOILET TOOL | 22 | |
| 952115 | CAP: OIL FILLING, | 2 | |
| 9550177960 | OIL PRECLOGGING SWTICH | 1 | |
| 956A1031 | FIXTURE - RTNR-NO 4 BRG INNER RACE/OIL SCOOP/ROTATING SEAL/FWD SEAL | 1 | |
| 956A1037 | FIXTURE - RESTRAINING - FWD ROTATING OIL SEAL NO. 4 BEARING | 1 | |
| 956A1039 | PULLER - ASSY - NO. 4 BRG FWD ROTATING OIL SEAL | 1 | |
| 956A1064 | FIXTURE - INSTALL - STATIONARY OIL SEAL - FWD | 1 | |
| 956A1078 | COIL - INDUCTION - INVERTED CONFIGURATION | 1 | |
| 956A1516 | PULLER - OIL SCOOP - 3R BEARING | 1 | |
| 956A1602P02 | FUEL & OIL SYSTEM PRESERVATION KIT GE LEAP-1A,-1B AND 1C, ON-WING ONLY | 1 | |
| 956A1805 | FIXTURE - RESTRAIN - SEAL ROTATING - OIL | 1 | |
| 956A1805G02 | ROTATING OIL SEAL RESTRAIN FIXTURE | 1 | |
| 956A3031 | FIXTURE - RTNR-NO 4 BRG INNER RACE/OIL SCOOP/ROTATING SEAL/FWD SEAL | 1 | |
| 956A3039 | PULLER - ASSEMBLY-NO. 4 BEARING FWD ROTATING OIL SEAL | 1 | |
| 956A3805 | FIXTURE - RESTRAIN - AFT ROTATING OIL SEAL - NO 4 BRG | 1 | |
| 956A6056 | KIT - RESTRAIN - OIL PIPE - SURFACE AIR COOLING OIL COOLER | 1 | |
| 956A6211 | IMPINGEMENT TEST TARGETTING SET - TGB OIL NOZZLE | 1 | |
| 956A6213 | IMPINGEMENT TEST TARGETTING SET - TGB OIL NOZZLE | 1 | |
| 956A6622 | FIXTURE - DRY OUT AND RELUB - ENGINE OIL SYSTEM | 1 | |
| 956A7615 | ADAPTER - REMOVE/INSTALL - OIL TANK | 1 | |
| 956A7615G02 | ADAPTER, REMOVE/INSTALL - OIL TANK | 3 | |
| 956A7647 | SET - TORQUE - TURBINE REAR FRAME OIL TUBES | 1 | |
| 956A7670 | PROTECTOR - SURFACE AIR COOLING OIL COOLER & T-RING | 1 | |
| 956A7680 | FIXTURE- OIL TANK PROTECTOR - ENGINE ASSEMBLY | 1 | |
| 956A8025 | FIXTURE - CHECK - NOZZLE - OIL BEARING 2 | 1 | |
| 956A8547 | FIXTURE - HOLDING - BRACKETS - OIL DRAIN | 1 | |
| 956A8674 | ADAPTER - DRAIN - OIL SYSTEM | 1 | |
| 956A8674G02 | ADAPTER, DRAIN - OIL SYSTEM RECOMMENDED 2 | 1 | |
| 956A8674G03 | ADAPTER, DRAIN - OIL SYSTEM | 2 | |
| 956A8681G01 | PROTECTOR - SURFACE AIR COOLING OIL COOLER PROTECTOR (SACOCP) | 1 | |
| 956A8681G02 | PROTECTOR - SURFACE AIR COOLING OIL COOLER PROTECTOR (SACOCP) | 4 | |
| 968.20.11.906 | OIL FILTER HOUSING PULLER | 1 | |
| 97A27302009000 | TOOL OIL FILLING THS ACTUATOR | 9 | |
| 97F12001014000 | ENGINE OIL FILLING BENCH | 1 | |
| 98A12001017000 | TANK - ENGINE OIL FILLING UP | 6 | |
| 98A27601014000 | EQUIPMENT-ADJUSTING,SPOILER AND SPEEDBRAKE SERVO CONTR | 3 | |
| 98A27601021000 | RIGGING PIN-INNER SPOILER, AIRBRAKE CONTROL | 2 | |
| 98A27603002000 | Sleeve locking external airbrake and spoiler actuating jacks | 13 | |
| 98A27603007000 | Spoilers aerofreins externes | 12 | |
| 98A27604011000 | ACTUATOR - SPOILER 3 THRU 7 - REMOVAL/INSTALLATION | 2 | |
| 98A27604014000 | ACTUATOR - SPOILER 3 THRU 7 - REMOVAL/INSTALLATION | 2 | |
| 98A27608011000 | CONTROL BOX - SPOILER VALVE GROUP Alt: RIN27608397000 CONTROL BOX | 1 | |
| 98A27608013000 | SICHERHEITSKLEMMEF SPOILER-ZYLINDER SAFETY COLLAR,SPOILER ACTUATOR PISTON | 9 | |
| 98A27608015000 | GAUGE SETTING,ACTR ADJ SPOILER | 4 | |
| 98A27608016000 | GAUGE-SETTING,ADJ STOPS SPOILER | 3 | |
| 98A27901000000 | ACTUATOR - SPOILER 3 THRU 7 DISTRIBUTOR BLOCK - REMOVAL/INSTALLATION | 14 | |
| 98A28104000002 | FILLING EQUIPMENT - TANK OIL | 25 | |
| 98A49907616000 | UNIT-OIL DRAINING,APU | 4 | |
| 98A49909001000 | UNIT - OIL DRAINING, APU | 1 | |
| 98A54403022000 | EXTRACTION BAGUE SPIGOT VOILURE EXTRACTOR-SLEEVE,WING SPIGOT | 12 | |
| 98D10007513000 | COVER-OILCOOLER OUTLET,APU ( THIS TOOL IS USED TO KEEP OUT DIRT, MOISTURE OR FOREIGN OBJECTS WHICH CAN GET INTO THE OILCOOLER OUTLET DUCT. YOU CAN CLOSE THE APU OILCOOLER OUTLET DUCT WITH THE COVER WHEN THE AI RCRAFT IS PARKED AND THE APU IS SWITCHED OFF. | 16 | |
| 98D276003002000 | KEY SPOILER MAINTENANCE | 1 | |
| 98D276003002001 | KEY SPOILER MAINTENANCE | 1 | |
| 98D276003002002 | KEY SPOILER MAINTENANCE | 1 | |
| 98D2760300200 | SPOILER MAINTENANCE KIT | 1 | |
| 98D27603002000 | KEY-SPOILER MAINTENANCE | 14 | |
| 98D276030020000 | KEY-SPOILER MAINTENANCE  (98D27603002001  1 KEY-SPOILER MAINTENANCE | 1 | |
| 98D27603002001 | KEY-SPOILER MAINTENANCE | 30 | |
| 98D27603002001-SET | SPOILER MAINTENANCE KIT-SET 10 | 1 | |
| 98D27603002002 | KEY-SPOILER MAINTENANCE | 7 | |
| 98D27603002200 | SPOILER MAINTENANCE | 1 | |
| 98D27604000000 | SPOILER COLLAR & MAINTENANCE KEY SET 98D27603002001 | 40 | |
| 98D27604001000 | KEY-SPOILER MAINTENANCE | 19 | |
| 98D27604004000 | COLLAR SAFETY, SPOILER (spoiler safety lock ring) | 8 | |
| 98D27803002001 | SPOILER MAINTENANCE KEY | 1 | |
| 98D71203001001 | SPOILER HINGE WEIGHT SUPPORT TOOL | 25 | |
| 98F27608236000 | RIGGING TOOL - ACTUATOR, SPOILER 1 | 3 | |
| 98F27608236001 | RIGGING TOOL-ACTUATOR,SPOILER 1 | 6 | |
| 98F27608236002 | RIGGING TOOL ACT SPOILER | 1 | |
| 98F27608236003 | RIGGING TOOL - ACTUATOR, SPOILER 1 | 12 | |
| 98L27004021000 | HOIST-REMOVAL INSTALLATION, SPOILER ACTUATOR | 1 | |
| 98L27601000000 | SHIM-SETTING,SPOILER | 3 | |
| 98L27601000040 | CALE REGLAGE SPOILER SPOILER SETTING SHIM | 1 | |
| 98L27601000100 | CALE REGLAGE SPOILER SPOILER SETTING SHIM | 1 | |
| 98L27601001000 | SPANNER-RIGGING,SPOILER EBHA | 1 | |
| 98L27603000000 | DEVICE, REMOVAL INSTALLATION - SPOILERS | 1 | |
| 98L27603000040 | SPOILER HOISTING DEVICE | 1 | |
| 98L57703001000 | REPAIR KIT, SPOILER BEARING | 1 | |
| 98S57003029000 | PATIN DE DELESTAGE VOILURE EXTREME ATR72 | 8 | |
| 98S79005000000 | Oil Engine Draining Cplg | 6 | |
| 98V27004001000 | R/I TOOL - SPOILER ACTUATOR (W/O OR W MINIHOIST | 5 | |
| 98V27004001001 | R/I TOOL - SPOILER ACTUATOR (W/O MINIHOI | 3 | |
| 98V27004006000 | EXTRACTOR - SPOILER / AILERON ACT PIN | 3 | |
| 98V27004017000 | GUIDE CONE SPOILER PIN | 6 | |
| 98V27004018000 | Spoiler actuator instead of connecting rod | 5 | |
| 98V27004027000 | EXTRACTOR - SPOILER / AILERON ACT PIN | 1 | |
| 98V27103004000 | SPOILER MAINTENANCE KEY | 9 | |
| 98V38108002000 | Closed joint for toilet door simulation | 4 | |
| 99-8030-6000 | OPS CHK WING SPOILER CLUTCH | 3 | |
| 9970-957-131 | OIL TANK MOUNTING TRUNNION | 1 | |
| 9970-957-148 | KIT ADAPTER OIL TANK TESTING | 1 | |
| 9970-958-092-G03 | OIL TANK BLANKING KIT | 1 | |
| 99A79003000000 | ENGINE OIL PRESSURE SIMULATOR | 1 | |
| 9C1130 | DUMMY NUT AND SPACER - NO 4 BRG INNER RACE AND OIL SCOOP INSTALLATION | 1 | |
| 9C1921 | BEARING INSTALL/OIL PUMP GEAR | 1 | |
| 9C1922 | BEARING REMOVAL/OIL PUMP GEAR | 1 | |
| 9C3002 | TOOL SET, INSTALL/REMOVE-NO 5 BRG AFT SEAL & AIR/OIL EXT | 1 | |
| 9C3134G02 | TGB lubricating oil nozzle puller for GE90 engine | 1 | |
| 9C3167 | PULLER-#4 BRG AFT ROTATING OIL SEAL | 1 | |
| 9XB285027-0 | NON-RECOIL PLUG - DISCHARGE HEAD OUTLET (ENGINE FIRE BOTTLE) | 1 | |
| A-27108-13 | LOOK SET SPOILER ACTUATING | 16 | |
| A1185-2CN246 | HELICOIL INSERT 8-32 | 2 | |
| A1191-12CN1125 | HELICOIL INSERT 3/4-16 | 1 | |
| A1191-3CN285 | HELICOIL INSERT 10-32 | 2 | |
| A1191-4CN375 | HELICOIL INSERT 1/4-28 | 1 | |
| A1191-5CN469 | HELICOIL INSERT 5/16-24 | 2 | |
| A12008 | RETAINER,OIL SHIELD | 1 | |
| A212636D | ENGINE OIL (MIL-PRF-23699) | 2 | |
| A22002-75 | CABLE SET - 787 EM SPOILER TESTING | 2 | |
| A24010-6 | Flared Oil - In Union | 1 | |
| A24010-7 | Flareless Oil - In Union | 1 | |
| A26-110 | OIL COOLER INLET PLUGS (set of 4) | 1 | |
| A27011-2 | SPOILER LOCK INBD | 1 | |
| A27043-1 | TEST EQUIPMENT FIXTURE - INBD/OUTBD SPOILER ACTUATOR | 1 | |
| A27096-1 | BREAKOUT BOX - SPOILER PANEL POSITION MONITOR AND RELAY CIRCUIT PRINTED CIRCUIT ASSEMBLY (PCA) | 1 | |
| A27108-14 | INBD SPOILER LOCK | 4 | |
| A300-27-60-00-0257 | TOOL-SPOILER HOLDING | 1 | |
| A32066-1 | VALVE - DRAIN, LANDING GEAR SHOCK STRUT OIL | 14 | |
| A350-130 | OIL COOLER INLET PLUG | 1 | |
| A353A04 | PMC OIL FILLING QUICK DISCONNECT | 2 | |
| A38003-20 | REMOVER - BLOCKAGE, VACUUM TOILET (THE BOEING COMPANY) | 19 | |
| A38003-21 | TOILET UNBLOCKING TOOL | 10 | |
| A38003-33 | SPRING-REMOVERBLOCKAGE(VAC. TOILET) | 2 | |
| A38003-34 | SPRING-REMOVERBLOCKAGE(VAC. TOILET) | 1 | |
| A38005-1 | TOILET DRAIN BLOCKAGE REM.TOOL | 5 | |
| A38012-39 | EXTRACTOR -HELICOIL INSER | 11 | |
| A5020 | VALVE, Oil Drain, 1/2"-20 | 2 | |
| A51005-14 | "Oil can" gage-pressure bulkhead pecs cooling pump | 1 | |
| AA5-105 | CARB. AIR or OIL COOLER INLET PLUG (each, specify model and year) | 1 | |
| AB27001-J4F | SET OF SPOILER MAINTENANCE KEYS | 1 | |
| AB27001-L3H | SET OF SPOILER MAINTENANCE KEYS | 1 | |
| AB27001-NN3 | SET OF SPOILER MAINTENANCE KEYS | 1 | |
| AB27001-SU9 | OIL DRAINING TOOL | 1 | |
| AB27001-ZI2 | SPOILER MAINTENANCE KEY | 1 | |
| AB27001-ZI3 | SPOILER MAINTENANCE KEY | 1 | |
| AB27001-ZI4 | SPOILER MAINTENANCE KEY | 1 | |
| AB27001-ZI5 | SPOILER MAINTENANCE KEY | 1 | |
| AB27001-ZI6 | SPOILER MAINTENANCE KEY | 1 | |
| AB27005-N3L | TOOL-OIL FILLING THS ACTUATOR | 1 | |
| ACBR-L00/50-500KHZ | CABLE- BRUNDY TO LEMO (BALANCE COIL IN CONNECTOR FOR 200KHZ PROBE) 50-500KHZ | 1 | |
| ACBR-MD6/50-500KHZ | CABLE- BURNDY TO MICRODOT (BALANCE COIL IN CONNECTOR FOR 200KHZ PROBE) 50-500KHZ | 1 | |
| ACE1410 | Truck − Toilet/Lavatory Servicing 100 gal. (378 L) Waste 60 gal.(227 L) Winterized | 1 | |
| ACJAG-MD6/50-500K | CABLE JAEGER CONNECTOR 6 PIN TO MICRODOT CONNECTOR WITH INTERNAL BALANCE COIL 6FT LONG ABSOLUTE BRIDGE FOR HOCKING PHASEC D60. | 1 | |
| ACL00-MBNC-1.5M | CABLE -00 LEMO TO MINI BNC MALE 1.5 METERS (5 FT) LONG. NO BALANCE COIL. Includes Certificate of Conformance. | 1 | |
| ACL00-TF6 | CABLE -00 LEMO TO MALE TRIAX FISCHER CONNECTOR, 6.0' FT LONG, NO BALANCE COIL. Includes Certificate of Conformance. | 1 | |
| ACN16-BNC/50-500KHZ | ADAPTOR - 16 PIN TO FEMALE BNC 50-500KHZ ..WITH BAL COIL. | 1 | |
| ACN16-CF6-R | CABLE - NORTEC (16 PIN LEMO) TO COAX LEMO / FISCHER CONNECTOR , 6FT LONG, NORTEC 500 and 600 SERIES INSTRUMENTS. NO BALANCE COIL Test Report and Certificate of Conformance. | 1 | |
| ACN16-L00-6 | CABLE - 16 PIN LEMO TO LEMO 00, NO BALANCE COIL, 6.0' FEET LONG. | 1 | |
| ACN16-L00-6/50-500K | CABLE - 16 PIN LEMO TO LEMO 00, WITH BALANCE COIL 50-500KHz, 6.0' FEET LONG. USED WITH NORTEC 2000, 500, 600 SERIES INSTRUMENTS. | 1 | |
| ACN16-L1-6 | CABLE - 16 PIN LEMO TO LEMO 1, NO BALANCE COIL, 6' | 1 | |
| ACN16-M12 | 16 Pin Lemo to Microdot NPID-1024 cable with No balance coil. Used with N500 series and N600 series instruments with internal balance coils. Note*** Olympus web information for this product is incorrect. The Nortec 2000D and Nortec 2000D+ do not have i | 1 | |
| ACN16-MD15 | 16 Pin to Microdot NPID-1024 cable 15ft long with No balance coil. Used with N500 series and N600 series instruments with internal balance coils. Note*** Olympus web information for this product is incorrect. The Nortec 2000D and Nortec 2000D+ do not h | 1 | |
| ACN16-MD4/500KHZ | NORTEC CABLE 16 PIN LEMO TO MICRODOT 4FT LONG WITH BAL COIL 500KHZ | 1 | |
| ACN16-MD6 | 16 Pin to Microdot NPID-1024 cable with No balance coil. Used with N500 series and N600 series instruments with internal balance coils. Note*** Olympus web information for this product is incorrect. The Nortec 2000D and Nortec 2000D+ do not have int... | 1 | |
| ACN16-MD6/1-3MHZ | CABLE 16 PIN LEMO TO MICRODOT 6 FT LONG WITH BALANCE COIL 8.2 UH | 1 | |
| ACN16-MD6/200K-1MHZ | CABLE 16 PIN LEMO TO MICRODOT 6 FT LONG WITH BALANCE COIL 16-30UH. Includes Certifcate of Conformance. | 1 | |
| ACN16-MD6/2MHZ | CABLE - NORTEC (16PIN LEMO) TO MICRODOT 6' FT LONG WITH BALANCE COIL | 1 | |
| ACN16-MD6/50-500KHZ | CABLE - NORTEC (16PIN LEMO) TO MICRODOT 6' FT LONG WITH BALANCE COIL. Used with Nortec 1000, Nortec 2000D and Nortec 2000D+ Instruments. | 1 | |
| ACN16-TF6-B | CABLE -, NORTEC 16 PIN LEMO TO TRIAX FISCHER/LEMO CONNECTOR BRIDGE COIL CONFIGURATION. 6FT, NORTEC 500-2000 SERIES INSTRUMENTS. Includes Certificate of Conformance. | 1 | |
| ACN16-TF6-R | CABLE - NORTEC (16 PIN LEMO) TO TRIAX FISCHER/LEMO CONNECTOR REFLECTION COIL CONFIGURATION, 6FT LONG, NORTEC 500-2000 SERIES INSTRUMENTS. Includes Certificate of Conformance. | 1 | |
| ACN16-TFR6-B | CABLE -, NORTEC 16 PIN LEMO TO TRIAX FISCHER/LEMO CONNECTOR RIGHT ANGLE, BRIDGE COIL CONFIGURATION. 6FT, NORTEC 500-2000 SERIES INSTRUMENTS. Includes Certificate of Conformance. | 1 | |
| ACP2D-MD6 | CABLE - PHASEC (12PINLEMO) P2D/P3D TO MICRODOT BRIDGE NO BALANCE COIL LOAD 6.0' FEET LONG. Includes Certificate of Conformance... | 1 | |
| ACT53134A | 134A OIL/DYE INJECTOR | 1 | |
| ACT53135 | R1234YF REFILL DYE/OIL INJCTR | 1 | |
| ACTR82375 | R134A OIL INJECTOR | 1 | |
| ACZ21-MD6/50-500KHZ | CABLE - 4PIN FISCHER MIZ 21 TO MICRODOT WITH BAL COIL 115-120UH 6 FT LONG 50-500KHZ | 1 | |
| ACZ21C-2MD6 | CABLE - MALE 18 PIN LEMO TO 2 SINGLE MICRODOT CONNECTORS, 6.0' FEET LONG. FOR MIZ21-C INSTRUMENT, (NO BALANCE COIL). Includes Test Report and Certificate of Conformance | 1 | |
| ACZ21C-MD6 | CABLE - MALE 18 PIN LEMO TO MICRODOT, 6 FEET LONG. FOR MIZ21-C INSTRUMENT, (NO BALANCE COIL). Includes Certificate of Conformance. | 1 | |
| ADDITEL9202 | MINERAL OIL | 1 | |
| AEM9723 | HAR DAV OIL PRESS IND LAMP WR | 1 | |
| AF-4241 | CUSTOM ROHMANN SURFACE PROBE, ABSOLUTE SHIELDED 90° DEGREE TIP BENT 25°, .500" DROP BENT 25°, .125"Ø, 6.55" LONG SUPPLIED WITH A MICRODOT CONNECTOR 3MHz WITH A CENTER FREQUENCY OF 500KHz, 31um Coil. IncludesTest Report and Certificate of Conformance. | 1 | |
| AF-4316 | LOW FREQUENCY BRIDGE/DIFFERENTIAL SPOT PROBE, .500"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 5-50KHz, .440"Ø coil OD. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4317 | LOW FREQUENCY BRIDGE/DIFFERENTIAL SPOT PROBE, .625"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 400HZ - 30KHz, .50"Ø coil OD. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4318 | LOW FREQUENCY BRIDGE/DIFFERENTIAL SPOT PROBE, .875"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 100HZ - 2 KHz, .750"Ø coil OD. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4330 | Low Frequency Spot probe with a diameter of 0.25inches (6.35) and a operating frequency range of 100kHz - 500kHz. Bridge coil configuration, triax Fischer/LEMO Connector. Includes Test Report and Certificate of Conformance. Model:S/100KHZ-500KHZ/.25 | 1 | |
| AF-5002.460/.675/TI | HIGH FREQUENCY RING PROBE 1.1 HEIGHT TI 500K - 1MHZ DIFF, SHIELD, ABS COIL | 1 | |
| AF-5002.755/.530/TI | HIGH FREQUENCY RING PROBE 1.1 HEIGHT TI 500K - 1MHZ DIFF, SHIELD, ABS COIL | 1 | |
| AF-5022 | HIGH FREQUENCY SURFACE PROBE 1-3MHz, ABS COIL, .500 DROP,.098 TUBING, 6.0" LONG, BENT AT 30 DEG 1.0" FROM THE HANDLE, SUPPLIED WITH A MICRODOT. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5043 | HIGH FREQUENCY PROBE, 1-5KHZ, DIFFERENTIAL, 4 COILS, .750 HEIGHT, .700"OD, .260"ID, SUPPLIED WITH A TRIAX FISCHER. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5044 | HIGH FREQUENCY RING PROBE 5-30KHz, ABS REFLECTION, 2 COILS, .850" HEIGHT, .700"OD, .260"ID, SUPPLIED WITH A TRIAX FISCHER. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5046 | HIGH FREQUENCY RING PROBE 10-100KHz, DIFFERENTIAL, .800"OD, .330"ID, 1.0" HEIGHT, 4 COILS, DELRIN HOUSING, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5104 | SPECIAL SPRING LOADED SURFACE PROBE, ABSOLUTE COIL 1-3MHz WITH MICRODOT CONNECTOR. PER AIRBUS SPECIFICATION A318/A319/A320/A321 57-20-40-991-002-A. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5117 | HIGH FREQUENCY SPOT PROBE, UNSHIELDED DIFFERENTIAL / BRIDGE, .250"Ø COIL, .312"Ø TIP , 100KHz-500KHz, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5141/TF | CUSTOM EDDY CURRENT PENCIL PROBE(DELRIN - BLACK ACETAL), STRAIGHT SHAFT WITH THE COIL CENTERED AT THE TIP .250"Ø, 50-500KHz UNSHIELDED WITH TRIAX FISCHER CONNECTOR, 3.0: LONG. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5165 | CUSTOM DUAL COIL EDDY CURRENT PROBE FOR GROOVE INSPECTION, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. REFERENCE: SLS-CRES-60D-GRV. | 1 | |
| AF-5173/2.25mm | Custom eddy current encircling probe for 2.25mm tube (outer diameter), inner diameter of coil housing 2.5mm, 50kHz – 500kHz, bridge differential, triax connector, include test report and certificate of conformance. | 1 | |
| AF-5173/7.5mm | Custom eddy current encircling probe for 7.25mm tube (outer diameter), inner diameter of coil housing 7.5mm, 50kHz – 500kHz, bridge differential, triax connector, include test report and certificate of conformance. | 1 | |
| AF-5254 | Custom Nortec / Pratt & Whittney Eddy Current Probe, 2MHz, Dual "D'" Coil, .2.50mm, 5.6 UH Matching Inductance, Spring Loaded Tip, Differential / Bridge, Match phase angle and frequency as close as possible. Supplied with a Triax Fischer connector. | 1 | |
| AF-5272 | CUSTOM COUNTERBORE ROTARY ADJUSTABLE X STYLE PROBE WITH THE COIL LOCATED AT THE EDGE OF THE PROBE TIP, .936'-1.0" 2.0"WL, SUPPLIED WITH A 4 PIN FICHER CONNECTOR, 100 KHz-2MHz Includes Test Report and Certificate of Conformance REFERENCE STANDARD - NDT3117 | 1 | |
| AF-5273 | RIGID STRAIGHT SURFACE PROBE, ABS SHIELDED, .125"Ø , .100"Ø COIL DIAMETER, 1-3MHz WITH A 2MHz CENTER FREQUENCY, ,700"( 17.788mm ) DROP, 90° JOGGLE, SUPPLIED WITH A TRIAX FISCHER CONNECTOR, 4.0" (101.6mm) LONG. Includes Test Report and Certificate of Confo | 1 | |
| AF-5274 | RIGID STRAIGHT SURFACE PROBE, ABS SHIELDED, .125"Ø , .100"Ø COIL DIAMETER, 1-3MHz WITH A 2MHz CENTER FREQUENCY, ,700"( 17.788mm ) DROP, 30° JOGGLE, SUPPLIED WITH A TRIAX FISCHER CONNECTOR, 12.0" (304.8mm) LONG. Includes Test Report and Certificate of Conf | 1 | |
| AF-5278/TF | HIGH FREQUENCY SURFACE PROBE, Twin Coil Differential 50-500KHZ. 4.0" Long 0.375" Diameter with Triax Fischer connector. For use with Boeing Reference Standard 497 767 Part 6 53-00-04. IncludesTest Report and Certificate of conformance. | 1 | |
| AF-5336/2MHZ-1 | Fixed Diameter Solid Rotating Scanner Probe, Differential Reflection coil Configuration,1/8"Ø, 1-3MHz with a 2MHz Center Frequency, Unshielded, 1.75" Working Length Supplied with a 4 Pin Fischer Connector. Includes Test Report and Certificate of Conforman | 1 | |
| AF-5456 | Custom Boeing 727 Eddy Current Manual Bolt Hole Probe, 13KHz, .625"Ø, 2.0" Working Length Supplied with a 1.25" Max Collar Length. Supplied with a Triax Fischer whch has an Internal Balance Coil. Includes Test Report and Certificate of Conformance........ | 1 | |
| AF-5461 | CUSTOM DUAL COIL SURFACE PROBE, STRAIGHT, UNSHIEDED DIFFERENTIAL, 50-500KHz, 3.0" LONG SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-6021 | ABOSLUTE SLIDING PROBE WITH SEPARATE DRIVER/RECEIVER COILS, REFLECTION. ALUMINUM HOUSING. 200HZ-100KHz. 4-Pin FISCHER CONNECTOR. Includes Test Report and Certificate of Conformation. | 1 | |
| AF-6025-10&4 | SLIDING PROBE WITH 10:00 NOTCH TANGENT COIL ARRANGEMENT TO DETECT 45° TANGENTIAL CRACKS, REFLECTION, 1KHz-100KHz, WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformation. | 1 | |
| AF-6026-2&7 | SLIDING PROBE WITH 2:00 NOTCH TANGENT COIL ARRANGEMENT TO DETECT 45° TANGENTIAL CRACKS, REFLECTION, 1KHz-100KHz, WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformation. | 1 | |
| AF-6027-3&9 | SLIDING PROBE WITH 3:00 NOTCH TANGENT COIL ARRANGEMENT TO DETECT 45° TANGENTIAL CRACKS, REFLECTION, 1KHz-100KHz, WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformation. | 1 | |
| AFK-ARRY21 | Y Style Rotating scanner probe with 4 Pin Step Lemo(Rechii) Connector. Probe Kit for use with Mini scanners. Reflection D Coils. Contains 1 each of the following in a shipping / storage container, 21 Probes Total: ARRY-.125-.156/1.75WL, ARRY-.156-.187/1 | 1 | |
| AFNDT-3157 | Liquid Penetrant Standard. Meets the ASME Boiler Pressure Code, Section V & III, and MIL-I-23135-C. The cracked aluminum block is made from 2024 aluminum and is 3” x 2” x 3/8” thick. A 1/8" wide groove separates the blocks two sides to facilitate side-... | 1 | |
| AFNDT-CFRP20-4 | Custom 20 ply 12" x 12" CFRP Test Panel with 4 random defects(grafoil delaminations) between the ply layup in random locations. Autoclave cured per Boeing Specification BAC 5317. Includes C-Scan image to identify defects and Certificate of Conformance. | 1 | |
| AFS-1390HC | 90° IN ALUMINUM 5 MHz .187" X .187" TOP MOUNT MINITURE ANGLE BEAM TRANSDUCER. CASE SIZE: .690"L x .250"W x .590"H WITH TOP MOUNT MICRODOT CONNECTOR AND 10-32 HELICOIL ATTACHED FOR EXTENSION HANDLE USE. Includes Test Report and Certificate of Conformance | 1 | |
| AG261 | OIL SERVICING CART | 1 | |
| AGE 00652-401 | CLAMP LOCKING SPOILER ACTUATOR | 11 | |
| AGE-00652-401 | CLAMP - LOCKING, SPOILER ACTUATOR | 11 | |
| AGE-00652-403 | CLAMP LOCKING SPOILER ACTUATOR | 13 | |
| AGE00652-401 | CLAMP - LOCKING, SPOILER ACTUATOR | 11 | |
| AGE70740 | Instrumented Oil Fill Cap | 1 | |
| AGE70742 | Instrumented Oil Tube | 1 | |
| AH120-100 | ENGINE PLUGS (left & right engine deck, oil cooler plugs) (set of 3) | 1 | |
| AH130-105 | OIL COOLER INLET COVER | 1 | |
| AH350-130 | OIL COOLER INLET PLUG | 1 | |
| AID-00629 | OIL SEAL INSTALLATION TOOL | 1 | |
| AID-00755 | INSTRUMENTED OIL SUPPLY TUBE | 1 | |
| AIT1200001 | Gauge Engine Oil Pressure | 1 | |
| AIT120001 | TANK - ENGINE OIL FILLING UP | 5 | |
| AIT20001 | OIL FILLING UNIT | 1 | |
| ALB570BSN-2 | RECOIL HOSE & FITTINGS | 1 | |
| AM-2390-3 | CONTAINER, OIL TANK | 1 | |
| AMH.562SE | Manual hole probe, Split-end, Expandable from 0.562 inch (14.27mm) diameter to .625 inch (15.9mm) with a 2.0 inch (5.08cm) working length, frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration. Includes Test Report and Certificic | 1 | |
| AMHF-.156/.5WL | Manual hole probe, ferrite shielded, 0.156 inch (3.96mm) diameter and .500" inch (27.9mm) working length, frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration. Includes Test Report and Certificate of Conformance. | 1 | |
| AMHF-.187/.5WL | Manual hole probe, ferrite shielded, 0.187 inch (4.76mm) diameter and .500" inch (27.9mm) working length, frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration. Includes Test Report and Certificate of Conformance. | 1 | |
| AMHF-.187/2.4WL | Manual hole probe, ferrite shielded, 0.187 inch (4.75mm) diameter and 2.5 inch (61.0mm) working length, frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration. Includes Test Report and Certificate of Conformance. | 1 | |
| AMHF-.187/200K-1M | Manual hole probe, ferrite shielded, 0.187 inch (4.76mm) diameter and 1.1 inch (27.9mm) working length, frequency 200kHz -1MHz, microdot connector, bridge absolute coil configuration. Includes Test Report and Certificate of Conformance. | 1 | |
| AMHF-.218 | Manual hole probe, ferrite shielded, 0.218 inch (5.5mm) diameter and 1.1 inch (27.9mm) working length, frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration. Includes Test Report and Certificate of Conformance. | 1 | |
| AMHF-.250/200K-1M | Manual hole probe, ferrite shielded, 0.250 inch (6.35mm) diameter and 1.1 inch (27.9mm) working length, frequency 200kHz -1MHz, microdot connector, bridge absolute coil configuration. Includes Test Report and Certificate of Conformance. | 1 | |
| AMHF-.375/.75WL | Manual hole probe, ferrite shielded, 0.375 inch (9.52mm) diameter and .750" inch (50.8mm) working length, frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration. Includes Test Report and Certificate of Conformance. | 1 | |
| AMHF-2.187 | SHIELDED MANUAL HOLE PROBE, 2.187Ø, FREQUENCY RANGE 50KHz-500KHz, ABSOLUTEL COIL CONFIGURAION. SUPPLIED WITH A MICRODOT CONNECTOR, 2.0" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AMHF-2.50 | SHIELDED MANUAL HOLE PROBE, 2.50Ø, FREQUENCY RANGE 50KHz-500KHz, ABSOLUTEL COIL CONFIGURAION. SUPPLIED WITH A MICRODOT CONNECTOR, 2.0" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AMHR.750 | Manual hole probe, 0.750 inch (19.05mm) diameter and 2.0 inch (50.8mm) working length, frequency 50kHz -500kHz, microdot connector, reflection coil configuration. Includes Test Report and Certificate of Conformance. | 1 | |
| AMS 1476 | CHEMICAL, TOILET FLUSHING DEODORANT | 1 | |
| AN16-P2D-R | Adaptor 16 Pin, reflection coil configuration probes with 12 Pin LEMO connector to Nortec 500/ 1000 or 2000 instrument (16 Pin LEMO)Model: L16-L12-R & ARN16-H22 | 1 | |
| AN8508-31A | Wrench Crowfoot, Engine oil Filters | 1 | |
| AP95-5B/30-50KHZ | Surface Probe- Right angle bent, 5.0" inches overall length with 0.5" inch drop and 0.25" inch diameter tip. Operating frequency 1KHz -30KKHz, Triax Fischer/Lemo triax connector, bridge differential coil configuration | 1 | |
| APA-106 | ENGINE INLET PLUGS w/ oil cooler plug (set of 6) | 1 | |
| APN-5/500K | RIGID STRAIGHT SURFACE PROBE, 200KHz-1MHz WITH A CENTER FREQUENCY OF 500KHz, 31 um Coil. .125"Ø, 5.0" LONG WITH A MICRODOT CONNECTOR Includes Test Report and Certificate of Conformance | 1 | |
| APN-91-4.5/L-500K | RIGID SURFACE PROBE 500KHZ, 90 DEGREE, .125" OD, .100" DROP, 4.5" LONG, MICRODOT CONNECTOR, COIL 47uh LOCATOR. Includes Test Report and Certificate of Conformance | 1 | |
| APN-95-5/500K | RIGID SURFACE PROBE, 90° DEGREES, .500" DROP, .125"Ø, 5.0" LONG WITH MICRODOT CONNECTOR 200 KHZ-1 MHZ WITH A CENTER FREQUENCY OF 500 KHZ, 31UM COIL. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| APN95-6C/L00 | SURFACE PROBE 90° DEGREES, ABSOLUTE BRIDGE COIL CONFIGURATION, .500 " DROP CURVE 6.0" LONG WITH A 7 PIN LEMO CONNECTOR. FREQUENCY: 100KHz-500KHz. Includes Test Report and Certificate of Conformance. 9222164, U8616093 | 1 | |
| ARP-.250/1.1-500HZ-5K | Handheld Detachable Probe w/o Cable; Model: RNG = Detachable Ring Probe with Reflection (Driver Pick-up Coils) ; Item Diameter: 0.250in (6.4mm); Tube ID: ; Coil: #= Special; Poly Type: None; Length: No cable; Connector: 1 Pin Female Triaxial Connecto... | 1 | |
| ARR-1.0SE/2.0WL | Universal Rotary Hole Probe 1.0 inch (25.40 mm) to 1.0625 inch (26.98 mm) diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 200 kHz - 3 MHz, supplied with a 4 pin step Lemo connector, reflection differential coil configuration ( | 1 | |
| ARR-1.200SE/2.0WL | Universal Rotary Hole Probe 1.200 inch (30.48 mm) to 1.262 inch (32.05 mm) diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 100 kHz - 2MHz 4-pin step lemo connector, RA SCANNER reflection differential coil configuration (1.250-1 | 1 | |
| ARRFB-.625SE/1.5WL | UNIVERSAL ROTARY FLAT BOTTOM EDGE PROBE (COIL ANGLE 30-45 DEGREES .039"DIA) 4 PIN STEP LEMO CONNECTOR 1.5" WORKING LENGTH 100KHz-2MHz. EXPANDABLE FROM .625"-.750"Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB-.625SE/2WL | UNIVERSAL ROTARY FLAT BOTTOM EDGE PROBE (COIL ANGLE 30-45 DEGREES .039"DIA) 4 PIN STEP LEMO CONNECTOR 2.0" WORKING LENGTH 100KHz-2MHz. EXPANDABLE FROM .625"-.750"Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB-.687SE/1.5WL | UNIVERSAL ROTARY FLAT BOTTOM EDGE PROBE (COIL ANGLE 30-45 DEGREES .039"DIA) 4 PIN STEP LEMO CONNECTOR 1.5" WORKING LENGTH 100KHz-2MHz. EXPANDABLE FROM .687"-.750"Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB-.750SE/2WL | UNIVERSAL ROTARY FLAT BOTTOM EDGE PROBE (COIL ANGLE 30-45 DEGREES .039"DIA) 4 PIN STEP LEMO CONNECTOR 2.0" WORKING LENGTH 100KHz-2MHz. EXPANDABLE FROM .750"-.875"Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB-.875SE/2WL | UNIVERSAL ROTARY FLAT BOTTOM EDGE PROBE (COIL ANGLE 30-45 DEGREES .039"DIA) 4 PIN STEP LEMO CONNECTOR 2.0" WORKING LENGTH 100KHz-2MHz. EXPANDABLE FROM .875"-1.000"Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB-1.00SE/2WL | UNIVERSAL ROTARY FLAT BOTTOM EDGE PROBE (COIL ANGLE 30-45 DEGREES .039"DIA) 4 PIN STEP LEMO CONNECTOR 2.0" WORKING LENGTH 100KHz-2MHz. EXPANDABLE FROM 1.000"-1.125"Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB-1.083SE/1.5WL | UNIVERSAL ROTARY FLAT BOTTOM EDGE PROBE (COIL ANGLE 30-45 DEGREES .039"DIA) 4 PIN STEP LEMO CONNECTOR 1.5" WORKING LENGTH 100KHz-2MHz. EXPANDABLE FROM 1.083"-1.250"Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB-1.125SE/2WL | UNIVERSAL ROTARY FLAT BOTTOM EDGE PROBE (COIL ANGLE 30-45 DEGREES .039"DIA) 4 PIN STEP LEMO CONNECTOR 2.0" WORKING LENGTH 100KHz-2MHz. EXPANDABLE FROM 1.125"-1.250"Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB-1.250SE/2WL | UNIVERSAL ROTARY FLAT BOTTOM EDGE PROBE (COIL ANGLE 30-45 DEGREES .039"DIA) 4 PIN STEP LEMO CONNECTOR 2.0" WORKING LENGTH 100KHz-2MHz. EXPANDABLE FROM 1.250"-1.375"Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB-1.375SE/2WL | UNIVERSAL ROTARY FLAT BOTTOM EDGE PROBE (COIL ANGLE 30-45 DEGREES .039"DIA) 4 PIN STEP LEMO CONNECTOR 2.0" WORKING LENGTH 100KHz-2MHz. EXPANDABLE FROM 1.375"-1.500"Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB-1.500SE/2WL | UNIVERSAL ROTARY FLAT BOTTOM EDGE PROBE (COIL ANGLE 30-45 DEGREES .039"DIA) 4 PIN STEP LEMO CONNECTOR 2.0" WORKING LENGTH 100KHz-2MHz. EXPANDABLE FROM 1.500"-1.625"Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB-1.625SE/2WL | UNIVERSAL ROTARY FLAT BOTTOM EDGE PROBE (COIL ANGLE 30-45 DEGREES .039"DIA) 4 PIN STEP LEMO CONNECTOR 2.0" WORKING LENGTH 100KHz-2MHz. EXPANDABLE FROM 1.625"-1.750"Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB-1.750SE/2WL | UNIVERSAL ROTARY FLAT BOTTOM EDGE PROBE (COIL ANGLE 30-45 DEGREES .039"DIA) 4 PIN STEP LEMO CONNECTOR 2.0" WORKING LENGTH 100KHz-2MHz. EXPANDABLE FROM 1.750"-1.875"Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB-1.875SE/2WL | UNIVERSAL ROTARY FLAT BOTTOM EDGE PROBE (COIL ANGLE 30-45 DEGREES .039"DIA) 4 PIN STEP LEMO CONNECTOR 2.0" WORKING LENGTH 100KHz-2MHz. EXPANDABLE FROM 1.875"-2.000"Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB30-.156SS/1.5WL | FLAT BOTTOM STAINLESS STEEL ROTARY PROBE WITH A 30° COIL ANGLE FOR RA 2000 SCANNER 100KHz-2MHz, SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR, .156"Ø OD, 1.5" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB30-.187SS/1.5WL | FLAT BOTTOM STAINLESS STEEL ROTARY PROBE WITH A 30° COIL ANGLE FOR RA 2000 SCANNER 100KHz-2MHz, SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR, .187"Ø OD, 1.5" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB30-.218SS/1.5WL | FLAT BOTTOM STAINLESS STEEL ROTARY PROBE WITH A 30° COIL ANGLE FOR RA 2000 SCANNER 100KHz-2MHz, SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR, .218"Ø OD, 1.5" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB30-.250SS/1.5WL | FLAT BOTTOM STAINLESS STEEL ROTARY PROBE WITH A 30° COIL ANGLE FOR RA 2000 SCANNER 100KHz-2MHz, SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR, .250"Ø OD, 1.5" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB30-.281SS/1.5WL | FLAT BOTTOM STAINLESS STEEL ROTARY PROBE WITH A 30° COIL ANGLE FOR RA 2000 SCANNER 100KHz-2MHz, SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR, .281"Ø OD, 1.5" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB30-.312SS/1.5WL | FLAT BOTTOM STAINLESS STEEL ROTARY PROBE WITH A 30° COIL ANGLE FOR RA 2000 SCANNER 100KHz-2MHz, SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR, .312"Ø OD, 1.5" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB30-.375SS/1.5WL | FLAT BOTTOM STAINLESS STEEL ROTARY PROBE WITH A 30° COIL ANGLE, .375"Ø USED WITH RA 2000 SCANNER. 1.5" WOIRKING LENGTH, SUPPLIED WITH A 4 PIN STEP LEMO, 100KHz-2MHz Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB30-.437SS/1.5WL | FLAT BOTTOM STAINLESS STEEL ROTARY PROBE WITH A 30° COIL ANGLE, .437"Ø USED WITH RA 2000 SCANNER. 1.5" WOIRKING LENGTH, SUPPLIED WITH A 4 PIN STEP LEMO, 100KHz-2MHz Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB30-.500SS/1.5WL | FLAT BOTTOM STAINLESS STEEL ROTARY PROBE WITH A 30° COIL ANGLE, .500"Ø USED WITH RA 2000 SCANNER. 1.5" WOIRKING LENGTH, SUPPLIED WITH A 4 PIN STEP LEMO, 100KHz-2MHz Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB30-.562SS/1.5WL | FLAT BOTTOM STAINLESS STEEL ROTARY PROBE WITH A 30° COIL ANGLE FOR RA 2000 SCANNER 100KHz-2MHz, SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR, .562"Ø OD, 1.5" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB30-.625SS/1.5WL | FLAT BOTTOM STAINLESS STEEL ROTARY PROBE WITH A 30° COIL ANGLE, FOR RA 2000 SCANNER 100KHz-2MHz, SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR, .625"Ø OD, 1.5" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB30-.750SS/1.5WL | FLAT BOTTOM STAINLESS STEEL ROTARY PROBE WITH A 30° COIL ANGLE, FOR RA 2000 SCANNER 100KHz-2MHz, SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR, .750"Ø OD, 1.5" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB30-10.2MSS/50MWL | STAINLESS STEEL FLAT BOTTOM ROTARY PROBE. COIL ANGLE 30° FREQUENCY RANGE:200KHz-2MHz. 10.2mmØ(0..402"),1.97"(50.0mm) WORKING LENGTH SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB30-10.6MSS/50MWL | STAINLESS STEEL FLAT BOTTOM ROTARY PROBE. COIL ANGLE 30° FREQUENCY RANGE:200KHz-2MHz. 10.6mmØ(0..417"),1.97"(50.0mm) WORKING LENGTH SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB30-11.1MSS/50MWL | STAINLESS STEEL FLAT BOTTOM ROTARY PROBE. COIL ANGLE 30° FREQUENCY RANGE:200KHz-2MHz. 11.1mmØ(0..437"),1.97"(50.0mm) WORKING LENGTH SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB30-3.5MSS/45MWL | STAINLESS STEEL FLAT BOTTOM ROTARY PROBE. COIL ANGLE 30°, FREQUENCY RANGE:200KHz-2MHz. 3.5mmØ(0.142"),1.77"(45.0mm) WORKING LENGTH SUPPLIED WITH A 4 PIN STEP CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB30-3.9MSS/45MWL | STAINLESS STEEL FLAT BOTTOM ROTARY PROBE. COIL ANGLE 30°, FREQUENCY RANGE:200KHz-2MHz. 3.9mmØ(0.154"),1.77"(45.0mm) WORKING LENGTH SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB30-4.3MSS/45MWL | STAINLESS STEEL FLAT BOTTOM ROTARY PROBE. COIL ANGLE 30° FREQUENCY RANGE:200KHz-2MHz. 4.3mmØ(0.169"),1.77"(45.0mm) WORKING LENGTH SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB30-5.0MSS/45MWL | STAINLESS STEEL FLAT BOTTOM ROTARY PROBE. COIL ANGLE 30° FREQUENCY RANGE:200KHz-2MHz. 5.0mmØ(0.197"),1.77"(45.0mm) WORKING LENGTH SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB30-5.4MSS/45MWL | STAINLESS STEEL FLAT BOTTOM ROTARY PROBE. COIL ANGLE 30° FREQUENCY RANGE:200KHz-2MHz. 5.4mmØ(0..213"),1.77"(45.0mm) WORKING LENGTH SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB30-5.6MSS/45MWL | STAINLESS STEEL FLAT BOTTOM ROTARY PROBE. COIL ANGLE 30° FREQUENCY RANGE:200KHz-2MHz. 5.6mmØ(0..220"),1.77"(45.0mm) WORKING LENGTH SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB30-6.0MSS/45MWL | STAINLESS STEEL FLAT BOTTOM ROTARY PROBE. COIL ANGLE 30° FREQUENCY RANGE:200KHz-2MHz. 6.0mmØ(0..236"),1.77"(45.0mm) WORKING LENGTH SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB30-6.3MSS/45MWL | STAINLESS STEEL FLAT BOTTOM ROTARY PROBE. COIL ANGLE 30° FREQUENCY RANGE:200KHz-2MHz. 6.3mmØ(0..248"),1.77"(45.0mm) WORKING LENGTH SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB30-6.6MSS/45MWL | STAINLESS STEEL FLAT BOTTOM ROTARY PROBE. COIL ANGLE 30° FREQUENCY RANGE:200KHz-2MHz. 6.6mmØ(0..260"),1.77"(45.0mm) WORKING LENGTH SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB30-7.0MSS/45MWL | STAINLESS STEEL FLAT BOTTOM ROTARY PROBE. COIL ANGLE 30° FREQUENCY RANGE:200KHz-2MHz. 7.0mmØ(0..276"),1.77"(45.0mm) WORKING LENGTH SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB30-7.5MSS/45MWL | STAINLESS STEEL FLAT BOTTOM ROTARY PROBE. COIL ANGLE 30°, FREQUENCY RANGE:200KHz-2MHz. 7.5mmØ(0..295"),1.77"(45.0mm) WORKING LENGTH SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB30-7.9MSS/45MWL | STAINLESS STEEL FLAT BOTTOM ROTARY PROBE. COIL ANGLE 30° FREQUENCY RANGE:200KHz-2MHz. 7.9mmØ(0..311"),1.77"(45.0mm) WORKING LENGTH SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB30-8.3MSS/45MWL | STAINLESS STEEL FLAT BOTTOM ROTARY PROBE. COIL ANGLE 30° FREQUENCY RANGE:200KHz-2MHz. 8.3mmØ(0..327"),1.77"(45.0mm) WORKING LENGTH SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB30-9.1MSS/45MWL | STAINLESS STEEL FLAT BOTTOM ROTARY PROBE. COIL ANGLE 30° FREQUENCY RANGE:200KHz-2MHz. 9.1mmØ(0..358"),1.77"(45.0mm) WORKING LENGTH SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRFB30-9.5MSS/50MWL | STAINLESS STEEL FLAT BOTTOM ROTARY PROBE. COIL ANGLE 30° FREQUENCY RANGE:200KHz-2MHz. 9.5mmØ(0..374"),1.97"(50.0mm) WORKING LENGTH SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARTPX-008 | Type: Rotating Probe Head - Straight Section; Model: ARTPX = Adjustable Rotating Probe for Mini Scanners, Reflection D coils (Driver Pick-up), X Type; Item Diameter: 0.375in (10mm); Tube ID: 0.375-0.437in (9.53-11.1mm); Coil: 1000= 100-2000 kHz; Poly ... | 1 | |
| ARTPX-029 | Type: Rotating Probe Head - Straight Section; Model: ARTPX = Adjustable Rotating Probe for Mini Scanners, Reflection D coils (Driver Pick-up), X Type; Item Diameter: 0.750in (19mm); Tube ID: 0.750-0.875in (19.05-22.23mm); Coil: 1000= 100-2000 kHz; Pol... | 1 | |
| ARTPX-030 | Type: Rotating Probe Head - Straight Section; Model: ARTPX = Adjustable Rotating Probe for Mini Scanners, Reflection D coils (Driver Pick-up), X Type; Item Diameter: 0.875in (22mm); Tube ID: 0.875-1.000in (22.23-25.4mm); Coil: 1000= 100-2000 kHz; Poly... | 1 | |
| AS-138 | KEY SPOILER MAINTENANCE | 1 | |
| AS3209-145 | ENGINE OIL TANK | 1 | |
| AS43013-222 | PFP OIL OUT FITTING | 5 | |
| AS5168-06 | OIL DRAIN FITTING | 1 | |
| ASDP-.312/50-500KHZ | HIGH FREQUENCY SPOT PROBE. REFLECTION .312" OD DIAMETER. 50K-500KHz, .200"Ø coil OD. TRIAX FISCHER CONNECTOR. Includes Certificate of Conformance and Test Report. | 1 | |
| ASDP-.312/500KHZ-1MHZ | HIGH FREQUENCY SPOT PROBE. REFLECTION .312" OD DIAMETER. 500KHz-1MHz, .200"Ø coil OD TRIAX FISCHER CONNECTOR. Includes Certificate of Conformance and Test Report. | 1 | |
| ASDP-.500/100HZ-1KHZ | LOW FREQUENCY REFLECTION SPOT PROBE, .500"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR, 100Hz-1KHz, .440"Ø coil OD. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.500/5-50Khz | LOW FREQUENCY REFLECTION SPOT PROBE, .500"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 5-50KHz, .440"Ø coil OD. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.500/550Hz-5KHz | LOW FREQUENCY REFLECTION SPOT PROBE, .500"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR, 550Hz-5KHz, .440"Ø coil OD. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.625 | LOW FREQUENCY REFLECTION SPOT PROBE, COIL O.D. .500"Ø, OVERALL PROBE DIAMETER .625"Ø(OD) WITH TOP MOUNT TRIAX FISCHER CONNECTOR. FREQUENCY: 300HZ-10KHZ. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.625/10K | LOW FREQUENCY REFLECTION SPOT PROBE, COIL O.D. .500"Ø, OVERALL PROBE DIAMETER .625"Ø(OD) WITH TOP MOUNT TRIAX FISCHER CONNECTOR. FREQUENCY: 5KHz-20KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.625/300HZ-10K | LOW FREQUENCY REFLECTION SPOT PROBE, COIL O.D. .500"Ø, OVERALL PROBE DIAMETER .625"Ø(OD) WITH TOP MOUNT TRIAX FISCHER CONNECTOR. FREQUENCY: 300HZ-10KHZ. Includes Test Report and Certificate of Conformance. | 1 | |
| ASIR5101-10 | PUSHER RECEIVER SPOILER BEARING | 1 | |
| AST5053 | OIL DRAIN FUNNEL | 1 | |
| AST6100A | OIL DRAIN THREAD REPAIR KIT | 1 | |
| ASTAU40178 | 2009 AUDI ENGINE OIL DIPSTICK | 1 | |
| ASTOFGMRD08 | FORD GM ENGINE OIL FILLER | 1 | |
| ASTOFHD419 | 1999-2006 HARLEY PUSHIN OILFIL | 1 | |
| ASTVW549L | OIL DRAIN PLUG TOOLS FOR VW | 1 | |
| AT1100A72 | HOUSING OIL SEAL | 1 | |
| AT1511/2 | TEST FITTING OIL INLET/OUTLET/BASEPLATE | 1 | |
| AT1511/3 | BLANKING PLUG FUEL/OIL INLET/OUTLET PORT | 1 | |
| AT1511/4 | BLANKING PLUG OIL BYPASS | 1 | |
| AT2386-4 | TEST FITTING OIL OUT PORT | 1 | |
| ATCSM100-.250 | MANUAL COUNTER SINK PROBE 100° DEGREES 50KHz-500KHz, ABSOLUTE COIL WITH TRIAX FISCHER CONNECTOR .250"Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| ATCSM100-.312 | MANUAL COUNTER SINK PROBE 100° DEGREES 50KHz-500KHz, ABSOLUTE COIL WITH TRIAX FISCHER CONNECTOR .312"Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH-.098 | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SOLID, .098" OD, 1.1" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH-.125/200K-1M | MANUAL BOLT HOLE PROBE 200KHz-1MHz, UNSHIELDED, ABS COIL, SPLIT END, .125" OD, 1.1" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH-.156 | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .156" OD, 1.1" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH-.156/200K-1M | MANUAL BOLT HOLE PROBE 200Kz-1MHz, UNSHIELDED, ABS COIL, SPLIT END, .156" OD, 1.1" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH-.187/200K-1M | MANUAL BOLT HOLE PROBE 200KHz-1MHz, UNSHIELDED, ABS COIL, SPLIT END, .187" OD, 1.1" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH-.187SE-5FX | FLEXIBLE MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .187"-.250" OD, 5.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH-.250 | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .250" OD, 1.1" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH-.250SE-5FX | FLEXIBLE MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .250"-.281" OD, 5.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH-.250SE/1.5WL | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .250"-.281" OD, 1.5" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH-.281SE/1.5WL | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .281"-.312" OD, 1.5" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH-.312SE-5FX | FLEXIBLE MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .312"-.375" OD, 5.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH-.312SE/2.0WL | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .312"-.375" OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH-.375 | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .375" OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH-.375-.437/SE | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .375"-.437" OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH-.500-.625/SE | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .500"-.625" OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH-.500/6/25KHZ | MANUAL BOLT HOLE PROBE 10-30KHz, UNSHIELDED, ABS COIL, SPLIT END, .500" OD, 6.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH-.562/12.5WL/500K | MANUAL BOLT HOLE PROBE 350KHz-3MHz, UNSHIELDED, ABS COIL, SPLIT END, .562" OD, 12.5" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH-.562/6.5WL/500K | MANUAL BOLT HOLE PROBE 350KHz-3MHz, UNSHIELDED, ABS COIL, SPLIT END, .562" OD, 6.5" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH-.750-.875/SE | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .750"-.875" OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH-.770/6WL/25K | MANUAL BOLT HOLE PROBE 25KHz, UNSHIELDED, ABS COIL, SPLIT END, .770" OD, 6.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH-.850/6WL/25K | MANUAL BOLT HOLE PROBE 25KHz, UNSHIELDED, ABS COIL, SPLIT END, .850" OD, 6.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH-1.0/10.5WL/500K | MANUAL BOLT HOLE PROBE 350KHz-3MHz, UNSHIELDED, ABS COIL, SPLIT END, 1.00" OD, 10.5" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH-1.0SE/24WL | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, 1.00"-1.25" OD, 24.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH-1.50/10.5WL/500K | MANUAL BOLT HOLE PROBE 350KHz-3MHz, UNSHIELDED, ABS COIL, SPLIT END, 500" OD, 10.5" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH-11MM | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .433"(11.0mm) OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH-875-1.00/SE | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .875"-1.00" OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH.125 | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .125" OD, 1.1" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH.125/1.5WL | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .125" OD, 1.5" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH.156 | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .156" OD, 1.1" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH.156-.187/2WL | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .156"-.187" OD, 1.1" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH.156/1.5WL | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .156" OD, 1.5" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH.187 | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .187" OD, 1.1" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH.187-.218/2WL | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .187"-.218" OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH.218 | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .218" OD, 1.1" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH.218-.250/2WL | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .218-.250" OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH.250 | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .250" OD, 1.1" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH.250-.281/2WL | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .250"-.281" OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH.281 | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .281" OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH.281-.312/2WL | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .281"-.312" OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH.312 | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .312" OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH.312-.375/2WL | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .312"-.375" OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH.375 | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .375" OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH.375-.437/2WL | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .375"-.437" OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH.375/2MHZ | MANUAL BOLT HOLE PROBE 1-3MHz, UNSHIELDED, ABS COIL, SPLIT END, .375" OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH.437 | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .437" OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH.437-.500/2WL | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .437"-.500" OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH.500 | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .500" OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH.500SE/2WL | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .500"-.562" OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH.562 | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .562" OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH.562-.625/2WL | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .562"-.625" OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH.625 | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .625" OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH.625-.687/2WL | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .625"-.687" OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH.687 | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .687" OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH.687-.750/2WL | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .687"-.750" OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH.750 | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .750" OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH.812 | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .812" OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH.875 | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .875" OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH.921 | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .921" OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH.937 | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .937" OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH/10MM | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .394"(10.0mm) OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH/5MM | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .197"(5.0mm) OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH/9MM | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, .354"(9.0mm) OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMH1.00 | MANUAL BOLT HOLE PROBE 50-500KHz, UNSHIELDED, ABS COIL, SPLIT END, 1.00" OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMHD-.120 | MANUAL BOLT HOLE PROBE 200KHZ-1MHZ, UNSHIELDED, DIFFERENTIAL COIL, SPLIT END, .120" OD, 1.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMHD-.156 | MANUAL BOLT HOLE PROBE 200KHZ-1MHZ, UNSHIELDED, DIFFERENTIAL COIL, SPLIT END, .156" OD, 1.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMHD.187 | MANUAL BOLT HOLE PROBE 200KHZ-1MHZ, UNSHIELDED, DIFFERENTIAL COIL, SPLIT END, .187" OD, 1.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMHD.218 | MANUAL BOLT HOLE PROBE 200KHZ-1MHZ, UNSHIELDED, DIFFERENTIAL COIL, SPLIT END, .218" OD, 1.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMHD.281/2WL | MANUAL BOLT HOLE PROBE 200KHZ-1MHZ, UNSHIELDED, DIFFERENTIAL COIL, SPLIT END, .281" OD, 1.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMHF-.156 | MANUAL BOLT HOLE PROBE 50-500KHZ, FERRITE SHIELDED, ABS COIL, SPLIT END, .156" OD, 4.0" OVERALL LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMHF-.375 | MANUAL BOLT HOLE PROBE 50-500KHZ, FERRITE SHIELDED, ABS COIL, SPLIT END, .375" OD, 3.5" OVERALL LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMHF.125/500K | MANUAL BOLT HOLE PROBE 500KHZ-1MHZ, FERRITE SHIELDED, ABS COIL, SPLIT END, .120" OD, 3.5" OVERALL LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMHF.156/500K | MANUAL BOLT HOLE PROBE 500KHZ-1MHZ, FERRITE SHIELDED, ABS COIL, SPLIT END, .156" OD, 3.5" OVERALL LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMHF.187/500K | MANUAL BOLT HOLE PROBE 500KHZ-1MHZ, FERRITE SHIELDED, ABS COIL, SPLIT END, .187" OD, 3.5" OVERALL LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMHF.250 | MANUAL BOLT HOLE PROBE 50-500KHZ, FERRITE SHIELDED, ABS COIL, SPLIT END, .250" OD, 3.5" OVERALL LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMHF.250/500K | MANUAL BOLT HOLE PROBE 500KHZ-1MHZ, FERRITE SHIELDED, ABS COIL, SPLIT END, .250" OD, 3.5" OVERALL LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMHF.312 | MANUAL BOLT HOLE PROBE 50-500KHZ, FERRITE SHIELDED, ABS COIL, SPLIT END, .250" OD, 3.5" OVERALL LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMHF.312-8WL | MANUAL BOLT HOLE PROBE 50-500KHZ, FERRITE SHIELDED, ABS COIL, SPLIT END, .312" OD, 8.0" OVERALL LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMHF.312/500K | MANUAL BOLT HOLE PROBE 500KHZ-1MHZ, FERRITE SHIELDED, ABS COIL, SPLIT END, .312" OD, 3.5" OVERALL LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMHF.375/500K | MANUAL BOLT HOLE PROBE 500KHZ-1MHZ, FERRITE SHIELDED, ABS COIL, SPLIT END, .375" OD, 3.5" OVERALL LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMHF.437/500K | MANUAL BOLT HOLE PROBE 500KHZ-1MHZ, FERRITE SHIELDED, ABS COIL, SPLIT END, .437" OD, 3.5" OVERALL LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMHF.500 | MANUAL BOLT HOLE PROBE 50-500KHZ, FERRITE SHIELDED, ABS COIL, SPLIT END, .500" OD, 3.5" OVERALL LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMHF.500-8WL | MANUAL BOLT HOLE PROBE 50-500KHZ, FERRITE SHIELDED, ABS COIL, SPLIT END, .500" OD, 8.0" OVERALL LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMHF.500/500K | MANUAL BOLT HOLE PROBE 500KHZ-1MHZ, FERRITE SHIELDED, ABS COIL, SPLIT END, .500" OD, 3.5" OVERALL LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMHF.562 | MANUAL BOLT HOLE PROBE 50-500KHZ, FERRITE SHIELDED, ABS COIL, SPLIT END, .562" OD, 3.5" OVERALL LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMHF.562/500K | MANUAL BOLT HOLE PROBE 500KHZ-1MHZ, FERRITE SHIELDED, ABS COIL, SPLIT END, .562" OD, 3.5" OVERALL LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMHF.625/500K | MANUAL BOLT HOLE PROBE 500KHZ-1MHZ, FERRITE SHIELDED, ABS COIL, SPLIT END, .625" OD, 3.5" OVERALL LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMHF.750 | MANUAL BOLT HOLE PROBE 50-500KHZ, FERRITE SHIELDED, ABS COIL, SPLIT END, .750" OD, 3.5" OVERALL LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMHF.750/500K | MANUAL BOLT HOLE PROBE 500KHZ-1MHZ, FERRITE SHIELDED, ABS COIL, SPLIT END, .750" OD, 3.5" OVERALL LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMHF.875/500K | MANUAL BOLT HOLE PROBE 500KHZ-1MHZ, FERRITE SHIELDED, ABS COIL, SPLIT END, .875" OD, 3.5" OVERALL LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMHF.891 | MANUAL BOLT HOLE PROBE 50-500KHZ, FERRITE SHIELDED, ABS COIL, SPLIT END, .891" OD, 3.5" OVERALL LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMHF1.0/500K | MANUAL BOLT HOLE PROBE 500KHZ-1MHZ, FERRITE SHIELDED, ABS COIL, SPLIT END, 1.00" OD, 3.5" OVERALL LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMHR.500-6/25KHZ | MANUAL BOLT HOLE PROBE 25-50KHZ, UNSHIELDED, REFLECTION COIL, SPLIT END, .500" OD, 6.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMHR.800/700HZ-3.5L | MANUAL BOLT HOLE PROBE 500Hz-2KHZ, UNSHIELDED, REFLECTION COIL, SPLIT END, .800" OD, 3.5" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMHS-.375 | MANUAL BOLT HOLE PROBE 50-500KHZ, FERRITE SHIELDED, ABS COIL, SPLIT END, .375" OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMHX-.312-.375 | MANUAL BOLT HOLE "X"-PROBE 200KHZ-1MHZ, UNSHIELDED, DIFFERENTIAL COIL, SPLIT END, .312"-.375"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMHX-1.567/5WL/2MHZ | MANUAL BOLT HOLE "X"-PROBE 1-3MHZ, UNSHIELDED, DIFFERENTIAL COIL, SPLIT END, 1.567"OD, 5.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMHYD.500-.562 | MANUAL BOLT HOLE "Y"-PROBE 500KHZ-3MHZ, UNSHIELDED, DIFFERENTIAL COIL, SPLIT END, .500"-.562 OD, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATPN-902-12FX | FLEXIBLE SURFACE PROBE 50-500KHz, .125"OD, 90 DEGREE, .020" DROP (Side Coil), 12.0" LONG, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATPN-902-7FX | FLEXIBLE SURFACE PROBE 50-500KHz, .125"OD, 90 DEGREE, .020" DROP (Side Coil), 7.0" LONG, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATPND-95-6B | RIGID SURFACE PROBE, DUAL COIL, 50-500KHZ, 90° DEGREES, .500" DROP BENT, 6.0" LONG, TRIAX FISCHER CONNECTOR. Includes test report and Certificate of Conformance. | 1 | |
| AUR-.125SE/1.75WL-LF | Universal Rotary Hole Probe, Self Expanding from 0.125 inch (3.18mm) to 0.156 inch (3.96mm) diameter, 1.75 inch (44 mm) working length, Operating frequency 100 kHz - 500KHz Supplied with a Fischer 4 pin connector, reflection differential coil configura... | 1 | |
| AUR-.156SE | Self-adjusting, Universal with "Bell" backshell Rotary Hole Probe..0.156 in. (3.97 mm) diameter, Self Expanding 1.75 in. (44.4 mm) working length.Operating frequency 200 kHz -3 MHz, Fischer 4 Pin connector, reflectiondifferential coil configuration. In... | 1 | |
| AUR-.156SE/1.75WL-LF | Universal Rotary Hole Probe Self Expanding from 0.156 inch (3.96 mm) to 0.187 inch (4.7 mm) diameter, 1.75 inch (44 mm) working length, Operating frequency 100 kHz - 500kHz Supplied with a Fischer 4 pin connector, reflection differential coil configura... | 1 | |
| AUR-.187SE/1.75WL-LF | Universal Rotary Hole Probe Self expanding from 0.187 inch (4.75 mm) to 0.250 inch (6.35mm) diameter, 1.75 inch(44 mm) working length, Operating frequency 100 kHz - 500KHz Supplied with a Fischer 4 pin connector, reflection differential coil configurat... | 1 | |
| AUR-.187SS/1.5WL | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.187 INCH (4.75MM) DIAMETER, 1.1 INCH (2.79CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| AUR-.218SE/2.0WL-LF | Universal Rotary Hole Probe Self Expanding from 0.218 inch (5.5 mm) to 0.250 inch (6.3mm) diameter, 2.00 inch(50 mm) working length, Operating frequency 100 kHz - 500KHz Supplied with a Fischer 4 pin connector, reflection differential coil configuratio... | 1 | |
| AUR-.250SE/2.0WL-LF | Universal Rotary Hole Probe Self expanding from 0.250 inch (6.35 mm) to 0.312 inch (7.14 mm) diameter, 2.00 inch (51 mm) working length, Operating frequency 100 kHz - 500KHz Fischer 4 pin connector, reflection differential coil configuration. Includes ... | 1 | |
| AUR-.250SS/1.5WL | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.250 INCH (6.35MM) DIAMETER, 2.0 INCH (5.08CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| AUR-.312SE/2.0WL-LF | Universal Rotary Hole Probe Self expanding from 0.312 inch (7.9 mm) to 0.375 inch (9.5 mm) diameter, 2.00 inch (50 mm) working length, Operating frequency 100Khz - 500Khz Supplied with a Fischer 4 pin connector, reflection differential coil configurat... | 1 | |
| AUR-.312SS/1.5WL | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.312 INCH (7.92MM) DIAMETER, 1.5 INCH (3.81CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| AUR-.375SE/2.0WL-LF | Universal Rotary Hole Probe Self Expanding from 0.375 inch (9.5mm) to 0.437 inch (11.0mm) diameter, 2 inch (50 mm) working length. Operating frequency 100 KHz - 500KHz Supplied with a Fischer 4 pin connector, reflection differential coil configuration.... | 1 | |
| AUR-.375SS/1.5WL | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.375 INCH (9.53MM) DIAMETER, 1.5 INCH (3.81CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| AUR-.437SE/2.0WL-LF | Universal Rotary Hole Probe Self Expanding from 0.437 inch (11.1mm) to 0.500 inch (12.7mm) diameter, 2 inch (50 mm) working length, Operating frequency 100KHz - 500KHz Supplied with a Fischer 4 pin connector, reflection differential coil configuration.... | 1 | |
| AUR-.500SE/2.0WL-LF | Universal Rotary Hole Probe Self Expanding from 0.500 inch (12.6 mm) to 0.562 inch (14.2 mm) diameter, 2 inch (50 mm) working length, Operating frequency 100kHz - 500KHz Supplied with a Fischer 4 pin connector, reflection differential coil configuratio... | 1 | |
| AUR-.500SS/1.5WL | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.500 INCH (12.7MM) DIAMETER, 2.0 INCH (5.08CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| AUR-.562SE/2.0WL-LF | Universal Rotary Hole Probe 0.562 inch (14.27mm) to 0.625 inch (15.87mm) diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 100 kHz - 500KHz Supplied with a Fischer 4 pin connector, reflection differential coil configuration ( ... | 1 | |
| AUR-.625SE/2.0WL-LF | Universal Rotary Hole Probe 0.625 inch (15.87mm) to 0.687 inch (17.45mm) diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 100 KHz - 500KHz Supplied with a Fischer 4 pin connector, reflection differential coil configuration ( ... | 1 | |
| AUR-.687SE/2.0WL-LF | Universal Rotary Hole Probe 0.687 inch (17.45mm) to 0.750 inch (19.3mm) diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 100 KHz - 500KHz Supplied with a Fischer 4 pin connector, reflection differential coil configuration ( .... | 1 | |
| AUR-.750SE/2.0WL-LF | Universal Rotary Hole Probe 0.750 inch (19.0 mm) to 0.812 inch (20.6 mm) diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 100 KHz - 500KHz Fischer 4 pin connector, reflection differential coil configuration ( .750-.812) Inclu... | 1 | |
| AUR-.786SE/4.0WL | Universal Rotary Hole Probe 0.786 inch (19.96 mm) to 0.875 inch (22.23 mm) diameter, Self Expanding 4 inch (101.6 mm) working length, Operating frequency 100 kHz - 2 MHz Fischer 4 pin connector, reflection differential coil configuration ( .900-.968) Incl | 1 | |
| AUR-1.75SE/2.0WL | Universal Rotary Hole Probe 1.75 inch (44.45 mm) to 1.812 inch (46.12 mm) diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 200 kHz - 3MHz Fischer 4 pin connector, reflection differential coil configuration Includes Test Repor... | 1 | |
| AUR-2.00SE/2.0WL | Universal Rotary Hole Probe 2.00 inch (50.80 mm) to 2.062 inch (52.37 mm) diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 200 kHz - 3MHz Fischer 4 pin connector, reflection differential coil configuration Includes Test Repor... | 1 | |
| AURFB30-.156SS/2WL | STAINLESS STEEL UNIVERSAL FLAT BOTTOM ROTARY PROBE, 30° DEGREE COIL ANGLE, .156"Ø, 2.0" WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 100KHz-2MHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-.187SS/2WL | STAINLESS STEEL UNIVERSAL FLAT BOTTOM ROTARY PROBE, 30° DEGREE COIL ANGLE, .187"Ø, 2.0" WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 100KHz-2MHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-.250SS/2WL | STAINLESS STEEL UNIVERSAL FLAT BOTTOM ROTARY PROBE, 30° DEGREE COIL ANGLE, .250"Ø, 2.0" WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 100KHz-2MHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-.312SS/2WL | STAINLESS STEEL UNIVERSAL FLAT BOTTOM ROTARY PROBE, 30° DEGREE COIL ANGLE, .312"Ø, 2.0" WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 100KHz-2MHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-.375SS/2WL | STAINLESS STEEL UNIVERSAL FLAT BOTTOM ROTARY PROBE, 30° DEGREE COIL ANGLE, .375"Ø, 2.0" WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 100KHz-2MHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-.437SS/2WL | STAINLESS STEEL UNIVERSAL FLAT BOTTOM ROTARY PROBE, 30° DEGREE COIL ANGLE, .437"Ø, 2.0" WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 100KHz-2MHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-.500SS/2WL | STAINLESS STEEL UNIVERSAL FLAT BOTTOM ROTARY PROBE, 30° DEGREE COIL ANGLE, .500"Ø, 2.0" WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 100KHz-2MHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-.562SS/2WL | STAINLESS STEEL UNIVERSAL FLAT BOTTOM ROTARY PROBE, 30° DEGREE COIL ANGLE, .562"Ø, 2.0" WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 100KHz-2MHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-.625SS/2WL | STAINLESS STEEL UNIVERSAL FLAT BOTTOM ROTARY PROBE, 30° DEGREE COIL ANGLE, .625"Ø, 2.0" WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 100KHz-2MHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-.750SS/2WL | STAINLESS STEEL UNIVERSAL FLAT BOTTOM ROTARY PROBE, 30° DEGREE COIL ANGLE, .750"Ø, 2.0" WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 100KHz-2MHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-.875SS/2WL | STAINLESS STEEL UNIVERSAL FLAT BOTTOM ROTARY PROBE, 30° DEGREE COIL ANGLE, .875"Ø, 2.0" WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 100KHz-2MHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-10.3MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 10.3mmØ, 50mm WORKING LENGTH WITH 4 PIN FISCHER CONNECTOR, 100KHz-2MHz, COIL ANGLE 30° DEGREES. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-10.7MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 10.7mmØ, 50mm WORKING LENGTH WITH 4 PIN FISCHER CONNECTOR, 100KHz-2MHz, COIL ANGLE 30° DEGREES. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-11.1MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 11.1mmØ, 50mm WORKING LENGTH WITH 4 PIN FISCHER CONNECTOR, 100KHz-2MHz, COIL ANGLE 30° DEGREES. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-11.5MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 11.5mmØ, 50mm WORKING LENGTH WITH 4 PIN FISCHER CONNECTOR, 100KHz-2MHz, COIL ANGLE 30° DEGREES. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-11.9MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 11.9mmØ, 50mm WORKING LENGTH WITH 4 PIN FISCHER CONNECTOR, 100KHz-2MHz, COIL ANGLE 30° DEGREES. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-12.3MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 12.3mmØ, 50mm WORKING LENGTH WITH 4 PIN FISCHER CONNECTOR, 100KHz-2MHz, COIL ANGLE 30° DEGREES. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-12.5MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 12.5mmØ, 100KHz-2MHz, COIL ANGLE 30° DEGREES. 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-12.7MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 12.7mmØ, 50mm WORKING LENGTH WITH 4 PIN FISCHER CONNECTOR, 100KHz-2MHz, COIL ANGLE 30° DEGREES. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-13.0MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 13.0mmØ, 100KHz-2MHz, COIL ANGLE 30° DEGREES. 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-13.1MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 13.1mmØ, 50mm WORKING LENGTH WITH 4 PIN FISCHER CONNECTOR, 100KHz-2MHz, COIL ANGLE 30° DEGREES. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-13.5MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 13.5mmØ, 100KHz-2MHz, COIL ANGLE 30° DEGREES. 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-14.0MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 14.0mmØ, 100KHz-2MHz, COIL ANGLE 30° DEGREES. 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-14.5MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 14.5mmØ, 100KHz-2MHz, COIL ANGLE 30° DEGREES. 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-15.0MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 15.0mmØ, 100KHz-2MHz, COIL ANGLE 30° DEGREES. 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-15.4MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 15.4mmØ, 50mm WORKING LENGTH WITH 4 PIN FISCHER CONNECTOR, 100KHz-2MHz, COIL ANGLE 30° DEGREES. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-15.5MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 15.5mmØ, 100KHz-2MHz, COIL ANGLE 30° DEGREES. 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-16.0MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 16.0mmØ, 100KHz-2MHz, COIL ANGLE 30° DEGREES. 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-16.3MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 16.3mmØ, 50mm WORKING LENGTH WITH 4 PIN FISCHER CONNECTOR, 100KHz-2MHz, COIL ANGLE 30° DEGREES. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-16.5MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 16.5mmØ, 100KHz-2MHz, COIL ANGLE 30° DEGREES. 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-3.6MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 3.6mmØ, 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 100KHz-2MHz, COIL ANGLE 30° DEGREES. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-3.9MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 3.9mmØ, 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 100KHz-2MHz, COIL ANGLE 30° DEGREES. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-4.0MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 4.0mmØ, 50mm WORKING LENGTH WITH 4 PIN FISCHER CONNECTOR, 100KHz-2MHz, COIL ANGLE 30° DEGREES. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-4.3MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 4.3mmØ, 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 100KHz-2MHz, COIL ANGLE 30° DEGREES. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-4.4MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 4.4mmØ, 50mm WORKING LENGTH WITH 4 PIN FISCHER CONNECTOR, 100KHz-2MHz, COIL ANGLE 30° DEGREES. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-4.7MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 4.7mmØ, 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 100KHz-2MHz, COIL ANGLE 30° DEGREES. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-4.8MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 4.8mmØ, 50mm WORKING LENGTH WITH 4 PIN FISCHER CONNECTOR, 100KHz-2MHz, COIL ANGLE 30° DEGREES. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-5.1MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 5.1mmØ, 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 100KHz-2MHz, COIL ANGLE 30° DEGREES. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-5.2MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 5.2mmØ, 50mm WORKING LENGTH WITH 4 PIN FISCHER CONNECTOR, 100KHz-2MHz, COIL ANGLE 30° DEGREES. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-5.7MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 5.7mmØ, 50mm WORKING LENGTH WITH 4 PIN FISCHER CONNECTOR, 100KHz-2MHz, COIL ANGLE 30° DEGREES. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-5.9MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 5.9mmØ, 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 100KHz-2MHz, COIL ANGLE 30° DEGREES. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-6.35MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 6.35mmØ, 50mm WORKING LENGTH WITH 4 PIN FISCHER CONNECTOR, 100KHz-2MHz, COIL ANGLE 30° DEGREES. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-6.3MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 6.3mmØ, 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 100KHz-2MHz, COIL ANGLE 30° DEGREES. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-6.7MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 6.7mmØ, 50mm WORKING LENGTH WITH 4 PIN FISCHER CONNECTOR, 100KHz-2MHz, COIL ANGLE 30° DEGREES. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-6.9MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 6.9mmØ, 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 100KHz-2MHz, COIL ANGLE 30° DEGREES. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-7.1MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 7.1mmØ, 50mm WORKING LENGTH WITH 4 PIN FISCHER CONNECTOR, 100KHz-2MHz, COIL ANGLE 30° DEGREES. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-7.5MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 7.5mmØ, 50mm WORKING LENGTH WITH 4 PIN FISCHER CONNECTOR, 100KHz-2MHz, COIL ANGLE 30° DEGREES. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-7.9MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 7.9mmØ, 50mm WORKING LENGTH WITH 4 PIN FISCHER CONNECTOR, 100KHz-2MHz, COIL ANGLE 30° DEGREES. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-8.3MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 8.3mmØ, 50mm WORKING LENGTH WITH 4 PIN FISCHER CONNECTOR, 100KHz-2MHz, COIL ANGLE 30° DEGREES. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-8.7MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 8.7mmØ, 50mm WORKING LENGTH WITH 4 PIN FISCHER CONNECTOR, 100KHz-2MHz, COIL ANGLE 30° DEGREES. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-9.1MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 9.1mmØ, 50mm WORKING LENGTH WITH 4 PIN FISCHER CONNECTOR, 100KHz-2MHz, COIL ANGLE 30° DEGREES. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-9.5MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 9.5mmØ, 50mm WORKING LENGTH WITH 4 PIN FISCHER CONNECTOR, 100KHz-2MHz, COIL ANGLE 30° DEGREES. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB30-9.9MSS/50MWL | UNIVERSAL FLAT BOTTOM STAINLESS STEEL ROTARY PROBE, 9.9mmØ, 50mm WORKING LENGTH WITH 4 PIN FISCHER CONNECTOR, 100KHz-2MHz, COIL ANGLE 30° DEGREES. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFBFX-.375SS/100MWL | STAINLESS STEEL FLEXIBLE ROTARY FLAT BOTTOM PROBE 100mm WORKING LENGTH, 9.525mmØ(.375") HEAD .750" LONG TIP, 4 PIN FISCHER CONNECTOR 100KHZ-2MHZ ( TAPERED END OF THE PROBE WITH 30° COIL ANGLE) per Airbus NTM 51-10-18. Includes Test Report and Certificate | 1 | |
| AURFBFX-.500SS/100MWL | STAINLESS STEEL FLEXIBLE ROTARY FLAT BOTTOM PROBE 100mm WORKING LENGTH, 12.7mmØ(.500") HEAD .750" LONG TIP, 4 PIN FISCHER CONNECTOR 100KHZ-2MHZ ( TAPERED END OF THE PROBE WITH 30° COIL ANGLE) per Airbus NTM 51-10-18. Includes Test Report and Certificate | 1 | |
| AURFBSE-17.4M/51MWL | UNIVERSAL EXPANDABLE FLAT BOTTOM ROTARY EDGE PROBE ( CENTERED COIL ) , SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 51mm(2.0") WORKING LENGTH, FREQUENCY RANGE: 100KHz-2MHz. EXPANDABLE FROM 17.4mm(0.685"Ø) - 19.0mmØ(.748"Ø). Includes Test Report and Certifi | 1 | |
| AURFBSE-19.0M/51MWL | UNIVERSAL EXPANDABLE FLAT BOTTOM ROTARY EDGE PROBE ( CENTERED COIL ) , SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 51mm(2.0") WORKING LENGTH, FREQUENCY RANGE: 100KHz-2MHz. EXPANDABLE FROM 19.0mm(0.748"Ø) - 20.6mmØ(.811"Ø). Includes Test Report and Certifi | 1 | |
| AURFBSE-5.5M/40MWL | STANDARD UNIVERSAL EXPANDABLE FLAT BOTTOM ROTARY EDGE PROBE ( CENTERED COIL ) , 4 PIN FISCHER CONNECTOR 40mm(1.57") WORKING LENGTH 100KHZ-2MHZ. EXPANDABLE PROBE HEAD DIAMETER= 5.5mm(0.2165Ø - APPROXIMATELY 6.91mmØ 0.272"Ø. Includes Test Report and C... | 1 | |
| AURFBSE-6.0M/51MWL | STANDARD UNIVERSAL EXPANDABLE FLAT BOTTOM ROTARY EDGE PROBE ( CENTERED COIL ) , 4 PIN FISCHER CONNECTOR 51mm(2.0") WORKING LENGTH 100KHz-2MHz. EXPANDABLE PROBE HEAD DIAMETER= 8.0mm(0.236"Ø) - 10.0mmØ(.315"Ø). Includes Test Report and Certificate of Con | 1 | |
| AURFBSE-8.0M/51MWL | STANDARD UNIVERSAL EXPANDABLE FLAT BOTTOM ROTARY EDGE PROBE ( CENTERED COIL ) , 4 PIN FISCHER CONNECTOR 51mm(2.0") WORKING LENGTH 100KHz-2MHz. EXPANDABLE PROBE HEAD DIAMETER= 8.0mm(0.315"Ø) - 10.0mmØ(.394"Ø). Includes Test Report and Certificate of Con | 1 | |
| AURYFB30-.393-.492/50MWL | ADJUSTABLE EXPANDABLE UNIVERSAL ROTARY FLAT BOTTOM EDGE PROBE (COIL ANGLE 30° DEGREES .039"DIA), (2.0") 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 100KHz-2MHz.. PROBE EXPANDABLE FROM .393"Ø - .492"mm Ø. Includes Test Report and Certi... | 1 | |
| AURYFB30-.492-.590/50MWL | ADJUSTABLE EXPANDABLE UNIVERSAL ROTARY FLAT BOTTOM EDGE PROBE (COIL ANGLE 30° DEGREES .039"DIA), (2.0") 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 100KHz-2MHz.. PROBE EXPANDABLE FROM .492"Ø - .590"mm Ø. Includes Test Report and Certi... | 1 | |
| AURYFB30-.590-.688/50MWL | ADJUSTABLE EXPANDABLE UNIVERSAL ROTARY FLAT BOTTOM EDGE PROBE (COIL ANGLE 30° DEGREES .039"DIA), (2.0") 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 100KHz-2MHz.. PROBE EXPANDABLE FROM .590"Ø - .688"mm Ø. Includes Test Report and Certi... | 1 | |
| AURYFB30-.688-.787/50MWL | ADJUSTABLE EXPANDABLE UNIVERSAL ROTARY FLAT BOTTOM EDGE PROBE (COIL ANGLE 30° DEGREES .039"DIA), (2.0") 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 100KHz-2MHz.. PROBE EXPANDABLE FROM .688"Ø - .787"mm Ø. Includes Test Report and Certi... | 1 | |
| AURYFB30-.787-.885/50MWL | ADJUSTABLE EXPANDABLE UNIVERSAL ROTARY FLAT BOTTOM EDGE PROBE (COIL ANGLE 30° DEGREES .039"DIA), (2.0") 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 100KHz-2MHz.. PROBE EXPANDABLE FROM .787"Ø - .885"mm Ø. Includes Test Report and Certi... | 1 | |
| AURYFB30-.885-.984/50MWL | ADJUSTABLE EXPANDABLE UNIVERSAL ROTARY FLAT BOTTOM EDGE PROBE (COIL ANGLE 30° DEGREES .039"DIA), (2.0") 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 100KHz-2MHz.. PROBE EXPANDABLE FROM .885"Ø - .984"mm Ø. Includes Test Report and Certi... | 1 | |
| AURYFB30-10.0-12.5M/50MWL | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, (COIL ANGLE 30° DEGREES .039"DIA), 100KHz-2MHz, SPILT END, .394"(10.0mm)-.492"(12.5mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFB30-11.1-13.3M/50MWL | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, (COIL ANGLE 30° DEGREES .039"DIA), 100KHz-2MHz, SPILT END, .437"(11.1mm)-.524"(13.3mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFB30-12.5-15.0M/50MWL | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, (COIL ANGLE 30° DEGREES .039"DIA), 100KHz-2MHz, SPILT END, .492"(12.5mm)-.591"(15.0mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFB30-15.0-17.5M/50MWL | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, (COIL ANGLE 30° DEGREES .039"DIA), 100KHz-2MHz, SPILT END, .591"(15.0mm)-.689"(17.5mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFB30-16.0-17.5M/50MWL | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, (COIL ANGLE 30° DEGREES .039"DIA), 100KHz-2MHz, SPILT END, .630"(16.0mm)-.689"(17.5mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFB30-20.0-22.5M/50MWL | ADJUSTABLE EXPANDABLE UNIVERSAL ROTARY FLAT BOTTOM EDGE PROBE (COIL ANGLE 30° DEGREES .039"DIA), 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 100KHz-2MHz.. PROBE EXPANDABLE FROM 20.0mmØ -22.5mm Ø. Includes Test Report and Certificate of C | 1 | |
| AURYFB30-22.5-25.0M/50MWL | ADJUSTABLE EXPANDABLE UNIVERSAL ROTARY FLAT BOTTOM EDGE PROBE (COIL ANGLE 30° DEGREES .039"DIA), 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 100KHz-2MHz.. PROBE EXPANDABLE FROM 22.5mmØ -25.0mm Ø. Includes Test Report and Certificate of C | 1 | |
| AURYFB30-9.5-11.1M/50MWL | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, (COIL ANGLE 30° DEGREES .039"DIA), 100KHz-2MHz, SPILT END, .374"(9.5mm)-.437"(11.1mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AZL02339-R00 | TOOLS SET FOR REM/INST SLEEVES/BEARINGS OF THE SPOILERS - A320 | 1 | |
| B0B02E | TURBINE OIL DISPENSER | 1 | |
| B1-4L6/1-3MHz | Bridge Cable, B1/M2-3 to 4-pin Lemo Step, 1-3 MHz, 6 foot, 2M coil | 1 | |
| B100-100 | ENGINE/OIL COOLER INLET PLUGS (set of 4) | 1 | |
| B100-103 | OIL COOLER INLET PLUGS (set of 2) | 1 | |
| B12006 | ADAPTER -0 LUBRICATION, SPOILER OUTER HINGE LINK | 1 | |
| B12006-1 | ADAPTER - LUBRICATION, SPOILER OUTER HINGE LINK ASSEMBLY | 15 | |
| B18-115 | OIL COOLER CENTER SECTION INLET PLUGS (in wing leading edge) (set of 2) | 1 | |
| B18-118 | COCKPIT AIR INLET PLUGS (in leading edge, adjacent to oil cooler) (set of 2) | 1 | |
| B20003-75 | #2 AILERON TAP SPOILER RIGGING PIN KIT | 1 | |
| B25-110 | OIL COOLER INLET PLUGS (set of 4) | 1 | |
| B300-101 | ENGINE/OIL COOLER INLET PLUGS (set of 4) | 1 | |
| B34994-3 | SAMPLING KIT, SPECTROMETRIC OIL | 2 | |
| B350-100 | ENGINE/OIL COOLER INLET PLUGS (OEM ship set item "B") (set of 4) | 1 | |
| B350-101 | ENGINE/OIL COOLER INLET PLUGS, winterized materials (set of 4) | 1 | |
| B90-100 | ENGINE INLET/OIL COOLER PLUGS (set of 4) | 1 | |
| B90-103 | OIL COOLER INLET PLUGS (set of 2) | 1 | |
| BA-2074-MAT | TRAY TO CONTAIN OIL | 1 | |
| BA24320A1 | TOILET EXTINGUISHER FI | 6 | |
| BAC27DEX2015 | Aluminium Foil Marker | 1 | |
| BAT011788 | SPOILER PAINT SCRAPER | 1 | |
| BC400 | OIL SERVICING | 6 | |
| BC400P | OIL SERVICING | 6 | |
| BIOBORJF | OIL, SYNTHETIC, ENGINE | 1 | |
| BK2G1251 | OIL/TRANSMISSION DRAIN KIT | 1 | |
| BL52655 | ADJUSTING EQUIPMENT, SPOILER AND SPEEDBRAKE SERVO CNTR | 1 | |
| BLS34529 | TOOL - OIL DRAINING, THS ACTUATOR | 8 | |
| BM323 | TOOL - INSTALLATION, SAFETY CABLE, 0.032 INCH DIA CONTAINER - OIL RESISTANT, 5 U.S. GALLON (19 LITER WRENCH - TORQUE | 4 | |
| BMS 8-336 TYPE I CLASS 1 | 1145 ALUMINUM ALLOY EXPANDED FOIL PER BMS 8-336 TYPE I CLASS 1 | 1 | |
| BMS7-374TY1 | ALUMINIUM FOIL | 1 | |
| BOB-20 | ENGINE OIL FILLING STAND | 1 | |
| BOB02 | OIL FILLING UNIT 2 GALLON ( 7,6 LITER) | 1 | |
| BOB02B | ENGINE OIL DISPENSER 2GALLONS | 1 | |
| BOB02D | TURBINE OIL DISPENSER(IDG SERVICING) | 1 | |
| BOB02E | OIL FILLING UNIT | 1 | |
| BOB02L | OIL FILLING UNIT 2 GALLON ( 7,6 LITER) | 1 | |
| BOB05 | OIL FILLING UNIT 5 GALLON ( 19 LITER) | 1 | |
| BOB05B-100 | PUMP - HAND, OIL FILLING-UP | 1 | |
| BOB05D | OIL FILLING UNIT, 5 GAL | 1 | |
| BOB05L | OIL FILLING UNIT 5 GALLON ( 19 LITER) | 1 | |
| BOB20 | CART - SERVICING, ENGINE OIL | 1 | |
| BPCH3825 | RECOILING HOSE | 1 | |
| BPU-12-SS | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.187 INCH (4.75MM) DIAMETER, 1.1 INCH (2.79CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| BPU-16-SS | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.250 INCH (6.35MM) DIAMETER, 2.0 INCH (5.08CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| BPU-20-SS | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.312 INCH (7.92MM) DIAMETER, 1.5 INCH (3.81CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| BPU-24-SS | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.375 INCH (9.53MM) DIAMETER, 1.5 INCH (3.81CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| BPU-32-SS | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.500 INCH (12.7MM) DIAMETER, 2.0 INCH (5.08CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| BPU-8-SS | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.125 INCH (3.18MM) DIAMETER, 1.1 INCH (2.79CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| BR-M6/50-500K-HD | Cable, 8 Pin Burndy to Microdot, w/ Balance Coil, Heavy Duty | 1 | |
| C0M1537 | CART - SERVICING, ENGINE OIL | 1 | |
| C107-00-0085 | INLET FITTING OILING FIXTURE | 1 | |
| C12005-1 | OIL GUN - TRAILING EDGE FLAP ACTUATOR, BALL SCREW, HAND OPERATED | 5 | |
| C12005-5 | Oil Gun -Trailing Edge Flap Actuator. Ball Screw. Hand Operated | 14 | |
| C130-160 | OIL COOLER INLET PLUGS (set of 4) | 1 | |
| C130-161 | OIL COOLER INLET PLUGS (J, T, P & U models), NSN: 2840-01-499-1521 (set of 4) | 1 | |
| C130-162 | OIL COOLER INLET PLUGS, (H, J, P, T & U models), heavy duty type (set of 4) | 1 | |
| C130-163 | OIL COOLER INLET PLUGS, heavy duty type, NSN 1730-01-530-6760 "SHIELD,AIRCRAFT GROUND SERVICING" (set of 4) | 1 | |
| C27001-16 | GROUND LOCK SET - OUTBOARD SPOILER ACTUATORS (BOEING 737-100/200) | 7 | |
| C27001-23 | GROUND LOCK SET - OUTBOARD SPOILER ACTUATORS (BOEING 737-300) | 2 | |
| C27001-24 | GROUND LOCK SET - OUTBOARD SPOILER ACTUATORS (BOEING 737-300 THRU -500) | 4 | |
| C27001-35 | GROUND LOCK SET - OUTBOARD SPOILER ACTUATORS (CONTAINS TWO LOCK ASSEMBLIES) (THE BOEING COMPANY) | 11 | |
| C27045-1 | INBOARD GROUND SPOILER LOCK SET OF 4 (SPL-1744) | 19 | |
| C27046 | LOCK SET INBOARD GROUND SPOILER ACTUATOR | 1 | |
| C27046-1 | Lock Set - Inboard Ground Spoiler Actuator | 9 | |
| C27046-11 | SET - LOCK, INBOARD GROUND SPOILER ACTUATOR (CONTAINS 4 LOCK ASSEMBLIES) | 1 | |
| C27046-13 | Lock Set - Inboard Ground Spoiler Actuator | 26 | |
| C27046-13 | LOCK INBOARD GROUND SPOILER | 26 | |
| C27046-14 | Lock Set Inboard GRD Spoiler Act | 6 | |
| C27046-17 | LOCK SET - INBOARD GROUND SPOILER ACTUATOR | 1 | |
| C27046-2 | INBOARD SPOILER ACTUATOR LOCK | 6 | |
| C27046-21 | LOCK SET - INBOARD GROUND SPOILER ACTUATOR | 3 | |
| C27047 | SET - LOCK, FLIGHT SPOILER ACTUATOR (CONTAINS 8 LOCK ASSEMBLIES) | 2 | |
| C27047-19 | Lockset, Flt Spoiler Actur ( Contains 8 Lock Assy ) | 9 | |
| C27047-2 | Lock Set Inboard GRD Spoiler Act | 1 | |
| C27047-41 | FLIGHT SPOILER ACTUATOR (CONTAINS 8 LOCK ASSYS) | 24 | |
| C27047-42 | SET - LOCK, FLIGHT SPOILER ACTUATOR (CONTAINS 8 LOCK ASSYS)(737NG BEFORE L/N 2040) | 13 | |
| C27047-43 | SPL-5586 Set - Lock, Flight Spoiler Actuator (Contains 8 Lock Assys) 737-600, -700, -800 | 15 | |
| C27069 | RIGGING EQPT. INTERLOCK VALVE CABLE GROUND SPOILER | 1 | |
| C27069-1 | RIGGING EQUIPMENT - INTERLOCK VALVE CABLE, GROUND SPOILER | 3 | |
| C27069-12 | Rigging Equipment - Interlock Valve Cable, Ground Spoiler | 12 | |
| C27069-20 | Rigging Equipment - Interlock Valve Cable, Ground Spoiler | 11 | |
| C27069-20 | RIGGING EQUIPMENT - INTERLOCK VALVE CABLE. GROUND SPOILER | 11 | |
| C27091 | Lock Set - Flight Spoiler Actuator (Contains 8 Lock Assemblies) | 1 | |
| C27091-1 | LOCK SET - FLIGHT SPOILER ACTUATOR (CONTAINS 8 LOCK ASSEMBLIES) | 1 | |
| C27107-1 | LOCK SET - FLIGHT SPOILER ACTUATOR (CONTAINS 8 LOCK ASSEMBLIES) | 13 | |
| C27107-2 | Set - Lock, Flight Spoiler Actuator (Contains 8 Lock Assemblies) | 4 | |
| C29004-1 | HYDRAULIC OIL DRAIN PIPE | 9 | |
| C32017-52 | VALVE - DRAIN, LANDING GEAR SHOCK STRUT OIL, KIT | 6 | |
| C32017-53 | VALVE - DRAIN, LANDING GEAR SHOCK STRUT OIL, KIT | 16 | |
| C32017-67 | VALVE - DRAIN, LANDING GEAR SHOCK STRUT OIL, KIT | 5 | |
| C32059-1 | SERVICE EQUIPMENT – OIL AND GAS DRAIN AND FILL, MAIN LANDING GEAR | 1 | |
| C79001 | TEST EQPT-ENGINE,FUEL/OIL,PRESSURE SWITCH | 1 | |
| C79001-1 | Test Eqpt - Engine Fuel and Oil Pressure Switch | 14 | |
| C90A-100 | ENGINE/OIL COOLER INLET PLUGS (set of 4) | 1 | |
| C90A-102 | ENGINE/OIL COOLER INLET PLUGS, "pitot" style inlets (set of 4) | 1 | |
| C90A-103 | OIL COOLER INLET PLUGS (below nacelle) (set of 2) | 1 | |
| C90B-100 | ENGINE/OIL COOLER INLET PLUGS (set of 4) | 1 | |
| C90B-103 | OIL COOLER INLET PLUGS (set of 2) | 1 | |
| C90B-104 | ENGINE/OIL COOLER INLET PLUGS, "pitot" style inlets (set of 4) | 1 | |
| CA-3x1.8-2M | Coil, Absolute, 3mmx1.8mm, 2MHz, blinded with 200mm core length | 1 | |
| CANKEY01 | TURBINE OIL CAN OPENER | 1 | |
| CANKEY01=8T | TURBINE OIL CAN OPENER | 1 | |
| CB01451 | MULTIFUNCTION SPOILER ACTUATOR MAINTENANCE COLLAR | 1 | |
| CB14 | NORTON COARSE INDIA OIL STONE(101,6 X 25,4 X 6,4 MM (4.00 X 1.00 X 0.25 ")) | 1 | |
| CB2010-001 | RIG CLEANING TOILET WASTELINE | 2 | |
| CF65B80578 | CHECK FIXTURE - QUADRANT LEVER AND BRACKET ASSEMBLY, INBOARD SPOILER | 1 | |
| CF65B80836 | CHECKING FIXTURE-SPOILER | 1 | |
| CG01 | GUN TOILET UNBLOCKING | 1 | |
| CHAIN HOIST-250KG | CHAIN HOILS 250 KG TOOL | 1 | |
| CJ3-100 | INTAKE COVERS & EXHAUST PLUGS (includes Engine Intake Covers, Exhaust Plugs, Pylon Inlet, Oil Outlet, and Pylon Exit plugs (set of 10) | 1 | |
| CJ3-102 | ENGINE COVERS (includes Engine Intake & Exhaust Cover, Pylon Inlet, Oil Outlet, and Pylon Exit plugs) (set of 10) | 1 | |
| CJ3-103 | COMPLETE ENGINE PLUGS (includes Engine Intake, Engine Exhaust, Pylon Inlet, Oil Inlet, Oil Outlet, and Pylon Exit plugs (set of 12) | 1 | |
| CJMD338-101 | TOILET DRAIN PLUG ADAPTER | 1 | |
| CL6 | CUTTING OIL | 1 | |
| CLIN001 | OIL SERVICING CART | 1 | |
| CLIN002 | OIL SERVICING CART | 1 | |
| CMU1000E | OIL HEATING BATH | 1 | |
| CP101 | OIL FILTER COMBINATION TORQUE WRENC | 1 | |
| CP2162 | OIL - PENETRATING - LIQUID WRENCH | 1 | |
| CP4475-3 | CHICAGO PNEUMATIC® RIVET GUNS ( BLOWS PER MINUTE: 2000 )( CAPACITY (ALUMINUM - STEEL): 1/4" - 3/16" )( OVERALL LENGTH: 10.8" (275 MM) )( TYPE: ERGONOMIC RECOILLESS PISTOL GRIP .498 SHANK ) | 1 | |
| CPWA-30393 | Flow Fitting, no. 3 bearing oil | 1 | |
| CPWA-30645 | Fitting – Oil Nozzle | 1 | |
| CPWA-30657 | Fitting – Oil Nozzle | 1 | |
| CPWA-30658 | Fitting – Oil Nozzle | 1 | |
| CPWA-30659 | Fitting – Oil Nozzle | 1 | |
| CPWA-30660 | Fitting – Oil Nozzle | 1 | |
| CPWA-30699 | Fitting – Oil Nozzle | 1 | |
| CPWA30328-1 | Oil Puller, Oil Filter Housing | 1 | |
| CPWA32500-001 | OIL FILTER HOUSING PULLER | 1 | |
| CS-AGE-69000 | ENGINE OIL SERVICE UNIT | 1 | |
| CS-AGE-69001 | Engine Oil Service Unit | 1 | |
| CSP1/16X1-SS | COILED SPRING PIN 1/16 X 1 STD DUTY STAINLESS | 1 | |
| CSP1/8X3/4-SZ | COIL SPRING PIN 1/8 X 3/4 STEEL ZINC | 1 | |
| CSP3/16X1-S | COILED SPRING PIN 3/16 X 1 STEEL | 1 | |
| CSPM2.5X14-S | COILED SPRING PIN M2.5 X 14 STEEL | 1 | |
| CTS401R79A | Gauge - roll spoiler neutral setting (rigging) | 2 | |
| D1150-28C | ASSEMBLY OF OIL INLET | 1 | |
| D12-100 | CALIBRATING OIL,STANDARD | 1 | |
| D12-50 | CALIBRATING OIL,STANDARD | 1 | |
| D12-5 | CALIBRATING OIL,STANDARD | 1 | |
| D19-0 | CALIBRATING OIL,STANDARD | 1 | |
| D5521-041 | OIL DRAIN HOSE ASSEMBLY | 1 | |
| D594 | PROPELLER GEARBOX OIL FILTER DRAIN ATTACHMENT | 1 | |
| D630P8001951 | SHIPPINGKIT - OIL SEAL CHANGE TOOL | 1 | |
| D652P5001051 | OIL DRAIN HOSE | 1 | |
| D7670A | Adaptor - oil drain CSD | 3 | |
| DB-75A | FITTING - STARTER OIL DRAIN/FILL (CF34-8E/ -10E) | 4 | |
| DB3188L | DRAIN UNIT (TRANSMISSION OIL) | 2 | |
| DB75A | FITTING - STARTER OIL DRAIN/FILL | 4 | |
| DB75A-48 | HOSE, DRAIN, OIL | 1 | |
| DC | SkyGeek Hydraulic Fluid & Turbine Oil Can Dust Cap | 2 | |
| DC10RPS-4 | RIGGING PIN-SPOILER SYS | 1 | |
| DC3-101 | OIL COOLER INLET PLUGS (set of 2) | 1 | |
| DEN-101 | SMALL PLUGS SET (2 Oil Cooler Plugs, Gen. Blast Tube, ECM inlet & Engine Mount NACA scoops) (set of 9) | 1 | |
| DEN-102 | SMALL PLUGS SET (2 Oil Cooler Plugs, Gen. Blast Tube, ECM inlet) (set of 4) | 1 | |
| DEN-110 | SMALL PLUGS SET, 47E Next Gen Models (2 Oil Cooler Plugs, Gen. Blast Tube, ECM inlet & Engine Mount NACA scoops) (set of 9) | 1 | |
| DEN-111 | SMALL PLUGS SET, 47E Next Gen Models (2 Oil Cooler Plugs, Gen. Blast Tube, ECM inlet) (set of 4) | 1 | |
| DH1025 PM | OIL CHARGING RIG | 1 | |
| DH1025PM | TANK-ENGINE OIL FILLING UP | 1 | |
| DH13PM | DISPENSER OIL FILLING UNIT | 5 | |
| DH2-112 | LOWER COWLING OIL SCOOP PLUG | 1 | |
| DHGA-10-10-00 | ENGINE OIL FILLING TANK/ OIL DISPENSER | 1 | |
| DI1015 | GUN ASSY RE-OILING | 1 | |
| DISPENSER MODEL 150 | DISPENSER ENGINE OIL MODEL 150 | 1 | |
| DOD-L-25681 | ENGINE LUBRICATING OIL | 1 | |
| DP13PM | Tank-engine oil filling Up | 1 | |
| DR712 | Starrett 1620 TOOL + INSTRUMENT OIL | 1 | |
| DR_SM-8915662 | LIFTING TOOL BHGE DR_SM-8915662 FOR FRAME SYNTHETIC OIL COOLER SIF0011494 SPECIAL TOOL FOR LIFTING OIL COLLER | 1 | |
| DT720118 | Helicoil Rmvl/Instl Tool | 1 | |
| DV1019 | STARTER & ENGINE OIL FEELING | 1 | |
| DW233AS259 | 8IN x 1IN x .003 FOIL | 1 | |
| DZZ0003-1 | PINZAS DE SPOILER | 1 | |
| DZZ7343-1 | BRACE SPOILER MAINT. | 1 | |
| E120-100 | ENGINE PLUGS (left & right engine deck, oil cooler plugs) (set of 3) | 1 | |
| E1224 | MOTOR DRIVEN PUMP MGB OIL DRAINING | 1 | |
| E1224/30-40 | MOTOR-DRIVEN PUMP, MGB OIL DRAINING | 1 | |
| E130-105 | OIL COOLER INLET COVER | 1 | |
| EEAC325A4 | OIL DRN/INJ BOT | 1 | |
| EEPV507 | ENGINE OIL PRESSURE SET | 1 | |
| ER6230G01 | MAIN ENGINE AIR OIL COOLER | 1 | |
| ESRC1 6.2SS | STD ELOTEST Countersink Probe, 6.2mm Pilot, 100 Degree, 100KHz-2MHz, Stainless, COIL AT MIDSPAN 35mm WL | 1 | |
| ESRC1 6.4SS | STD ELOTEST Countersink Probe, 6.4mm Pilot, 100 Degree, 100KHz-2MHz, Stainless, COIL AT MIDSPAN 50mm WL | 1 | |
| ESRC1 7.8SS | STD ELOTEST Countersink Probe, 7.8mm Pilot, 100 Degree, 100KHz-2MHz, Stainless, COIL AT MIDSPAN 50mm WL | 1 | |
| EX-92644 | JIG-DRILL, PINION REAR BEARING OIL JET | 2 | |
| Ex-74969 | Jig-drill, pinion gear oil jet | 2 | |
| Ex-92644 | Jig-drill, pinion rear bearing oil jet | 2 | |
| F-1123 | OILITE BEARING | 3 | |
| F00203050 | ELECTRIC PUMP FOR MGB OIL DRAIN | 1 | |
| F00310070 | MOTOR DRIVEN PUMP MGB OIL DRAINING | 1 | |
| F190-100 | OIL COOLER INTAKE PLUG | 1 | |
| F27320000 | SPACER, OIL FILLING | 1 | |
| F70066 | PLUG ASSY -0 ENGINE OIL COOLING UNIT USED TO | 1 | |
| F70200-14 | BOTTLE - NITROGEN CART - SERVICING, STRUT OIL INFLATOR - STRUT, LANDING GEAR GAUGE - PRESSURE, 0-3000 PSIG (0-20685 KPA) WRENCH - TORQ BUCKET - 2.5 GALLON CAPACITYUE | 19 | |
| F70200-35 | BOTTLE - NITROGEN CART - SERVICING, STRUT OIL INFLATOR - STRUT, LANDING GEAR GAUGE - PRESSURE, 0-3000 PSIG (0-20685 KPA) WRENCH - TORQUE BUCKET - 2.5 GALLON CAPACITY | 16 | |
| F7020035 | SET - LOCK, INBOARD GROUND SPOILER ACTUA | 16 | |
| F70338 | NON-RECOIL CAP, ENGINE FIRE EXTINGUISHER BOTTLE | 1 | |
| F71198 | PLUG ASSY -0 ENGINE OIL COOLING INLET TO PLUG | 1 | |
| F72731-82 | ADAPTER ASSY-FUEL&OIL QUANTITY INDICAT | 5 | |
| F72903-12 | Oil Breather Test Equipment JT8D Engine | 1 | |
| F72903-24 | Pressure Test Equipment - Oil Breather, JT8D Engine | 4 | |
| F72912-1 | CONJUNTO BLOCAJE SPOILERS INTERIOR Y EXTERIOR | 6 | |
| F72912-3 | INBD FLIGHT SPOILER | 1 | |
| F72912-8 | INBD SPOILER LOCK (SPOILERS 5 & 10) | 1 | |
| F72951-42 | Male Boiler Drain | 1 | |
| F72979 | PROTRACTOR -0 SPOILER LOCKOUT INSTL. MAIN GEAR. | 1 | |
| F72979-1 | MLG PROTRACTOR SPOILER LOCKOUT INST | 5 | |
| F7672700-39 | SPANNER SET-SPOILER HINGE BOLT | 1 | |
| F7F-120 | OIL COOLER INLET PLUGS (set of 2) | 1 | |
| F80017-33 | GROUND LOCK SPOILER-33 REPLACES -23 WHICH IN TURN | 20 | |
| F80040-15 | INBOARD SPOILER LOCK | 16 | |
| F80040-2 | INBOARD SPOILER GAG | 28 | |
| F80040-20 | SET OF INBOARD SPOILER ACTUATOR LOCKS | 1 | |
| F80113-123 | Oil impregnated bronze thrust bearing | 2 | |
| F80113-124 | Oil impregnated bronze thrust bearing | 2 | |
| F80113-125 | Oil impregnated bronze thrust bearing | 2 | |
| F80251-1 | BEARING EQUIPMENT - GROUND SPOILER AND ACTUATOR SP | 1 | |
| FBX01-35-51000 | OIL TRANSFER TUBE CONTAINER | 1 | |
| FCR6 | FOR AIR CONDITIONER FIN COMB SET STRAIGHTEN EVAPORATOR CONDENSOR COILS | 2 | |
| FF724 | FINE INDIA OIL STONE | 1 | |
| FILIPE@ALOIAAEROSPACE.COM | FITTING - STARTER OIL DRAIN/FILL | 1 | |
| FLUTE TAP 14 07 | HELICOIL HAND INSERTING TOOL, STRAGHT | 1 | |
| FLUTE TAP 20 07 | HELICOIL HAND INSERTING TOOL, STRAGHT | 1 | |
| FLUTE TAP 3FBB | HELICOIL HAND INSERTING TOOL, STRAGHT | 1 | |
| FLUTE TAP HSS1/2'' 20UNJF | HELICOIL HAND INSERTING TOOL, STRAGHT | 1 | |
| FS0005 | OIL INLET AND OUTLET ADAPTER | 1 | |
| FXT-14831 | INSTRUMENTED OIL TUBE | 1 | |
| G12002-1 | FUNNEL-ENGINE OIL TANK SCUPPER | 4 | |
| G27001 | LOCK OPEN EQPT -0 INBD SPOILER ACTUATOR NO. 5 & | 1 | |
| G27001-1 | LOCK OPEN EQUIPMENT - INBOARD SPOILER ACTUATOR NUMBER 5 AND NUMBER 8 | 10 | |
| G27002 | LOCK OPEN EQPT -0 INBD SPOILER ACTUATOR NO. 6 & | 1 | |
| G27002-1 | LOCK OPEN EQUIPMENT - INBOARD SPOILER ACTUATOR NUMBER 6 AND NUMBER 7 | 10 | |
| G27007-1 | LOCK OPEN EQUPT. - INBD SPOILER ACT 5 & 8 | 1 | |
| G27032-8 | SPOILER LOCKING TOOL | 10 | |
| G27053-54 | HANDLING EQUIPMENT - REMOVAL AND INSTALLATION, INBOARD AND OUTBOARD SPOILERS (CE) | 1 | |
| G27057-1 | HOLD OPEN LOCK - INBOARD SPOILER ACTUATOR | 2 | |
| G27099-46 | SPRING PIN, COILED 3/32" X 5/1 | 1 | |
| G32108-1 | VALVE - DRAIN, LANDING GEAR SHOCK STRUT OIL | 1 | |
| G600-270016-105 | Fixture - Inboard And Outboard Flaps And Flight Spoiler Rigging (Lh) | 4 | |
| G600-270016-106 | Fixture - Inboard And Outboard Flaps And Flight Spoiler Rigging (Rh) | 4 | |
| G600-270016−105 | FIXTURE - INBOARD AND OUTBOARD FLAPS AND FLIGHT SPOILER RIGGING (LH) | 4 | |
| G600-270016−106 | FIXTURE - INBOARD AND OUTBOARD FLAPS AND FLIGHT SPOILER RIGGING (RH) | 4 | |
| G600−270016−105 | FIXTURE − INBOARD AND OUTBOARD FLAPS AND FLIGHT SPOILER RIGGING (LH) | 4 | |
| G600−270016−106 | FIXTURE − INBOARD AND OUTBOARD FLAPS AND FLIGHT SPOILER RIGGING (RH) | 4 | |
| G601R282601-1 | CONNECTOR ASSEMBLY (OIL DRAIN) | 5 | |
| G700-276201-1 | Safety Collar - Multifunction Spoiler Pcu Inboard | 5 | |
| G700050752 | G700050752;PIM Foil 36-inch x 100-ft Roll | 1 | |
| G700???276201???1 | SAFETY COLLAR ??? MULTIFUNCTION SPOILER PCU INBOAR | 5 | |
| G700−276201−1 | SAFETY COLLAR − MULTIFUNCTION SPOILER PCU INBOARD | 5 | |
| GB492-191-370 | IGB AND TGB OIL DRAINING HOSE | 1 | |
| GERIN0ILTESTKIT | GERIN OIL TEST KIT | 1 | |
| GLY-VAK | VACCUME TOILET LINE DESCALAR | 1 | |
| GM/A/5317 | OIL REPLENISHING RIG | 1 | |
| GR000133 | SPECIFIED MODIFIED HELI-COIL INSERT INSTALLATION TOOL | 1 | |
| GR000135 | SPECIAL MODIFIED HELI-COIL TWINSERT INSERT INSTALLATION T | 1 | |
| GROOO133 | SPECIAL MODIFIED HELI-COIL INSERT INSTALLATION TOOL | 1 | |
| GS10758 | COIL SPRING INSERTER | 1 | |
| GS10758-1 | INSERTER COIL SPRING | 1 | |
| GS13690-1 | INSERTER, COIL SPRING | 1 | |
| GS14616-1 | INSERTER, OIL SEAL PLATE 54H60 | 3 | |
| GS15571 | Hub Oil Container | 1 | |
| GS15571-1 | BARREL OIL CONTAINER | 10 | |
| GS19890-1 | INSERTER COIL SPRING | 1 | |
| GS2-102 | OIL COOLER INLET PLUGS (turbine powered) (set of 2) | 1 | |
| GS20401-1 | OIL TRANSFER TUBE CONTAINER | 7 | |
| GS204011 | OIL TRANSFER CONTAINER | 7 | |
| GS20690-1 | INSTALLER OILL LEVEL INDICATOR | 1 | |
| GS22058-1 | PUSHER, COIL SPRING | 1 | |
| GS26224-1 | STORAGE CONTAINER, OIL TRANSFER TUBE | 2 | |
| GSB 1210009 | UNIT - HYD. OIL MIL-H-5606 SERVICING, 2 QUARTS | 1 | |
| GSB 1220003 | Cart − Toilet/Lavatory Servicing 68 gal./31gal. (257 L/117 L) Water Replenish Winterized | 1 | |
| GSB1210009 | Unit − Hyd. Oil MIL−H−5606 Servicing 2 Quarts | 1 | |
| GSB1210017 | SERVICING UNIT-2 QT. PORTABLE ENGINE OIL SERVICING (0-3000 PSI) | 1 | |
| GSB1220002 | Cart − Toilet/Lavatory Servicing (31 gal./15 gal.) Water Replenish Winterized | 1 | |
| GSB1220003 | CART TOILET/LAVATORY SERVICING 68 GAL./31 GAL. WATER REPLENISH | 1 | |
| GSB3411012 | JACKING SCREW − OIL PUMP (SERIES 400) | 1 | |
| GSE 066 | SPOILER ACTUATOR LOCKING CLAMP | 1 | |
| GSE 24X-25-01 | ENGINE/APU OIL FILL UNIT AND ADAPTER | 1 | |
| GSE-066 | CLAMP- LOCKING, SPOILER ACTUATOR | 1 | |
| GSE050-170-190 | K-2410 COUPLING TOILET SYS FILLING | 1 | |
| GSE051 | CART - TOILET GROUND SERVICING | 1 | |
| GSE231-170-190 | GUN-1/4 ENGINE OIL REPLENISHING | 1 | |
| GSE3100324 | DEGAUSSING COIL | 1 | |
| GSE55038 | Safety Tool − Spoiler Locking Collar | 5 | |
| GSE7900745 | ENGINE AND INTEGRATED DRIVE GENERATOR OIL REPLENISHING KIT | 1 | |
| GTE1224/30-40 | MOTOR-DRIVEN PUMP, MGB OIL DRAINING | 1 | |
| GTP-1299HVO | 3/16" HIGH VISIBILITY ORANGE GROUNDING CABLE - 1000FT COIL | 1 | |
| H-3412 | FILTER, OIL ENGINE | 2 | |
| H-PSG UNC 7/8-14 | HELICOIL INSERTING TOOL 7/8-14 | 1 | |
| H-PSG UNC 8-32 | HELICOIL INSERTING TOOL 8-32 | 1 | |
| H-PSG UNF 1-14 | HELICOIL INSERTING TOOL 1-14 | 1 | |
| H-PSG UNF 1/2-20 | HELICOIL INSERTING TOOL 1/2-20 | 1 | |
| H-PSG UNF 1/4-28 | HELICOIL INSERTING TOOL 1/4-28 | 1 | |
| H-PSG UNF 10-32 | HELICOIL INSERTING TOOL 10-32 | 1 | |
| H-PSG UNF 3/4-16 | HELICOIL INSERTING TOOL 3/4-16 | 1 | |
| H-PSG UNF 3/8-24 | HELICOIL INSERTING TOOL 3/8-24 | 1 | |
| H-PSG UNF 5/16-24 | HELICOIL INSERTING TOOL 5/16-24 | 1 | |
| H-PSG UNF 5/8-18 | HELICOIL INSERTING TOOL 5/8-18 | 1 | |
| H-PSG UNF 7/16-20 | HELICOIL INSERTING TOOL 7/16-20 | 1 | |
| H-PSG UNF 9/16-18 | HELICOIL INSERTING TOOL 9/16-18 | 1 | |
| H01-742 | Adapter, Oil Inlet | 1 | |
| H201 | OIL TANK DRAIN TOOL | 4 | |
| H201/PHP | OIL TANK DRAIN TOOL | 1 | |
| H207289-1 | ADAPTER – OIL – INLET | 1 | |
| H21824-1000 | TOOL - OIL DRAINING, THS ACTUATOR | 7 | |
| H301-118 | OIL DRAIN HOSE | 3 | |
| H3412 | FILTER: OIL,ENGINE, | 2 | |
| H3501 | FILTER: OIL,ENGINE, | 1 | |
| HA-23003267 | OIL STRUT CLEANING KIT | 1 | |
| HA-703A95-0505-00 | HOSE DRAINAGE OIL MGB AND TGB | 1 | |
| HC-2171 | HYD. ENGINE OIL SERVICE CART (SN 1638050101) [RE-56-01] | 1 | |
| HC130H0042-000 | Extractor - bush lift spoiler hinges | 2 | |
| HC130H0144-000 | Extractor - roll spoiler PCU pin | 3 | |
| HC22891 | HELICOIL INSERT TOOL | 3 | |
| HC7010-3 | DEGAUSSING COIL | 1 | |
| HCM8X1.25X12 | HELICOIL M8 X 1.2 5 X 12MM LG - STAINLESS STEEL | 1 | |
| HEL5625 | HELI-COIL INSERTING TOOL | 1 | |
| HELI | HELICOIL INSERT KIT TOOL | 1 | |
| HM-GT1-C | CART - SERVICING, OIL | 1 | |
| HM-GT1-C-VS | CART SERVICING OIL | 1 | |
| HM-GT1-CD-VS | CART SERVICING OIL | 1 | |
| HMF-BG-135-01-PW | OIL DRAIN CANISTEL | 1 | |
| HMF-BG-135-200.02 | OIL DRAIN HOSE | 1 | |
| HMF-BG-135-200.02-PW | OIL DRAIN HOSE | 1 | |
| HMF-BG-135-200.05 | OIL DRAIN HOSE | 1 | |
| HMF-BG-135-201-01-PW/PHP | OIL DRAIN CANISTEL | 1 | |
| HMF-BG-135-201-02 | OIL DRAIN HOSE, TRGB DRAIN TOOL, | 1 | |
| HMF-BG-135-201-02-PW | OIL DRAIN HOSE FENESTRO | 1 | |
| HMF-BG-135-201-02-PW/PHP | OIL DRAIN HOSE FENESTRON | 1 | |
| HMF-BG-135-210 | ENGINEOIL FILING DEVIC/0IL FUNNEL | 1 | |
| HRR683-26 | GM TRANS OIL LINE DISC | 1 | |
| HRR683-8 | OIL COOLER LINE DISCNCT TOOL | 1 | |
| HRY.187-.250 | PROBE, ADJUSTABLE BOLT-HOLE, 100 KHZ TO 2.0 MHZ FREQUENCY, DIFFERENTIAL COILS. 0.187 IN. (4.75 MM) TO 0.250 IN. (6.35 MM) DIAMETER, (TECHNA NDT OR EQUIVALENT) | 1 | |
| HS7530 | MECHANICAL PULLER - SELECTOR VALVE AND OIL LEVEL INDICATOR | 1 | |
| HS7588 | INSERTER - OIL SEAL PLATEQ | 1 | |
| HS7623 | FIXTURE-OIL INDICATOR ADJUSTING | 1 | |
| HS8173 | Puller, Prop Integral Oil Cont | 3 | |
| HS8174 | PULLER-MECHANICAL, OIL INDICATOR | 2 | |
| HS9065 | COIL SPRING INSERTER | 1 | |
| HS9066 | INSERTER - COIL SPRING | 1 | |
| HS9068 | INSERTER - COIL SPRING | 1 | |
| HS9069 | COIL SPRING INSERTER | 1 | |
| HS9070 | COIL SPRING INSERTER | 1 | |
| HS9071 | INSERTER - COIL SPRING | 1 | |
| HS9072 | INSERTER - COIL SPRING | 1 | |
| HS9073 | INSERTER - COIL SPRING | 1 | |
| HS9074 | INSERTER - COIL SPRING | 1 | |
| HS9075 | INSERTER - COIL SPRING | 1 | |
| HS9076 | COIL SPRING INSERTER | 1 | |
| HS9077 | INSERTER COIL SPRING | 1 | |
| HS9097 | COIL SPRING INSERTER | 1 | |
| HS9099 | COIL SPRING INSERTER | 1 | |
| HSP1584 | PULLER-INTEGRAL OIL ASSY | 1 | |
| HU24412-1 | TOOL, INSERT, HELICOIL 9/16-18UNF | 1 | |
| HU27078 | Freezing Pins-Oil Pump Assembly | 1 | |
| HU28856-1 | Shaft - Drawbar & Guide, LP Compressor Shaft Oil Tube - RB211-535E4 Engine | 1 | |
| HU28858 | Installer, Cupwasher & Retaining Nut, Center Oil Tube - RB211-535E4 | 1 | |
| HU28859 | Spanner - Retaining Nut, Center Oil/Signal Tube - RB211-535E4 Engine | 1 | |
| HU31042-1A | TOOL - OIL TUBE CLEANING | 1 | |
| HU31261 | PRESSURE OIL DRAIN TOOL | 4 | |
| HU37693 | POSITIONER-ASSY OIL SLINGER, DEDICATED ALTERNATOR | 4 | |
| HU44200 | POSITIONER-ASSY OIL SLINGER,DEDICATED ALTERNATOR | 7 | |
| HU44202 | EXTRACTR -REMOVAL .DEDICATED ALTERNATOR OIL SLINGER | 7 | |
| HU81215-1 | Oil seal joint RIG-INHIBITING | 4 | |
| HW64308 | PIN: SETTING IGNITOR PLUG HELICOIL | 1 | |
| IAE1F10067 | CASTING DE-OILER REMOVAL TOOL | 15 | |
| IAE1F10069 | DEOILER RING PULLER | 14 | |
| IAE1F10070 | DEOILER RING PULLER. | 14 | |
| IAE1F10072 | CASTING DE-OILER INST. TOOL | 16 | |
| IAE1F10082 | PIN OIL FILTER | 20 | |
| IAE1F10153 | ROD, INSTALL - OIL TRANSFER TUBE | 1 | |
| IAE1J13400 | WRENCH MECHANICAL ENGINE ASSY DRAIN PORT FUEL COOLED OIL COOLER | 15 | |
| IAE1R18003 | WRENCH - ENGINE ASSY, DE-OILER GEAR & IMPELLOR INSTALLATION (ON-WING) | 22 | |
| IAE1R18928 | WRENCH, DUCT - AIR COOLED OIL COOLER INLET DUCT | 3 | |
| IAS-1330-02 | FUEL & OIL SYSTEM PRESERVATION KIT GE LEAP-1A,-1B AND 1C, ON-WING ONLY | 1 | |
| IM1OZMP12-1 | SINGLE AIR TOOL OIL 1OZ | 1 | |
| IM1PT | AIR TOOL OIL 1 PINT | 1 | |
| IM1PTMP6 | 6PK AIR TOOL OIL 1PINT | 1 | |
| INIMD-700AK | MINI DUCTOR II KIT W/COIL SET | 1 | |
| INIMD99-603 | 41" Bearing Buddy Coil | 1 | |
| J-FD01.16 | PORTABLE LUBRICATING OIL REFUELING EQUIPMENT (LUBRICATING OIL GROUND REFUELING COMPONENTS) | 1 | |
| J12008-1 | Funnel-scupper，engine oil tank | 1 | |
| J20003-11 | RIG PIN PAX DOOR / CGO DOOR / ELEV / SPOILER | 6 | |
| J27005 | LOCK SET-INBD/OUTBD,SPOILER ACTUATOR | 1 | |
| J27005-28 | LOCK-INBD&OTBD SPOILER ACTUATOR | 1 | |
| J27005-33 | LOCK EQUIPMENT - INBOARD/OUTBOARD, SPOILER ACTUATOR | 6 | |
| J27005-34 | INBOARD SPOILER LOCK | 1 | |
| J27005-35 | LOCK EQUIPMENT - INBOARD/OUTBOARD, SPOILER ACTUATOR | 1 | |
| J27005-48 | LOCK EQUIPMENT - INBOARD/OUTBOARD, SPOILER ACTUATOR | 9 | |
| J27005-48 repair | Lock eqpt-inbd/outbd，spoiler actuator | 1 | |
| J27005-50 | Lock Eqpt Inb/Outbd Spoiler | 1 | |
| J27005-63 | LOCK EQUIPMENT - INBOARD/OUTBOARD, SPOILER ACTUATOR | 1 | |
| J27005-64 | Lock eqpt-inbd/outbd，spoiler actuator | 7 | |
| J2700548 | LOCK EQUIP - INB/OB SPOILER ACT | 9 | |
| J27085-1 | Sling equipment-outboard spoilers,removal and installation | 2 | |
| J27086-1 | Spoiler and droop panel sling equipment-inboard，removal/installation | 2 | |
| J27135-1 | Sling-pcu,inboard spoiler | 1 | |
| J32060-1 | MLG/NLG STRUT OIL DRAIN | 26 | |
| J32108-1 | VALVE - DRAIN, LANDING GEAR SHOCK STRUT OIL | 2 | |
| J32108-16 | VALVE - DRAIN, LANDING GEAR SHOCK STRUT OIL | 12 | |
| JAOD3090 | 90Ltr GRAVITY OIL DRAINER | 1 | |
| JAODE090 | 2 IN 1 WASTE OIL DRAINER & CHANGER | 1 | |
| JAOE1090 | 90Ltr SUCTION OIL DRAINER | 1 | |
| JCONNECT | 1/2" x 4m R1 Oil Connecting Hose M X F | 1 | |
| JK-0014-01 | OIL CONTAMINATION TEST KIT | 1 | |
| K-2029 | CART TOILET/LAVATORY SERVICING 31 GAL/15 GAL WATER REPLENISH-WINTERIZED | 8 | |
| K-2410 | COUPLING, SYSTEM FILLING - TOILET | 13 | |
| K-2410. | COUPLING TOILET FILL | 13 | |
| K-3706 | ADAPTER FOR THE MIL-H-5606 OIL FILLING DEVICE IN AMORTSTOYKI | 16 | |
| K2029 | CART − TOILET/LAVATORY SERVICING (31 GAL./15 GAL.) WATER REPLENISH WINTERIZED | 8 | |
| K23377-01000 | COOLING COIL ASSEMBLY | 1 | |
| K2410 | COUPLING TOILET FILL | 13 | |
| K27006 | REMOVAL/INSTALLATION EQUIPMENT -0 SPOILER | 1 | |
| K27006-1 | REMOVAL/INSTALLATION EQUIPMENT - SPOILER ELECTRIC MOTOR ACTUATOR (CE) | 7 | |
| K27006-1 | REMOVAL/INSTALLATION EQUIPMENT-SPOILER ELECTRIC MOTOR ACTUATOR | 7 | |
| K27006-11 | REMOVAL/INSTALLATION EQPT-SPOILER ELECTRIC MOTOR ACTUATOR | 1 | |
| K27006-12 | REMOVAL/INSTALLATION EQPT-SPOILER ELECTRIC MOTOR ACTUATOR | 1 | |
| K27006-2 | REMOVAL/INSTALLATION EQPT-SPOILER ELECTRIC MOTOR ACTUATOR | 1 | |
| K27006-3 | REMOVAL/INSTALLATION EQPT-SPOILER ELECTRIC MOTOR ACTUATOR | 1 | |
| K27006-7 | REMOVAL/INSTALLATION EQPT-SPOILER ELECTRIC MOTOR ACTUATOR | 1 | |
| K27006-9 | REMOVAL/INSTALLATION EQPT-SPOILER ELECTRIC MOTOR ACTUATOR | 1 | |
| K27011-32 | DISPATCH EQPT INBOARD HYD SPOILER | 11 | |
| K27011-33 | DISPATCH EQUIPMENT - HYDRAULIC SPOILER ACTUATORS, INBOARD | 11 | |
| K27011-47 | DISPATCH EQPT - INBD HYDRAULIC SPOILER ACTUATORS | 11 | |
| K27017 | LOCK EQUIPMENT - INB'D / OUTB'D SPOILER ACTUATOR | 1 | |
| K27017-22 | Lock Equipment - Spoiler Actuator, Inbd/Outbd | 10 | |
| K27017-24 | Inboard Lock - Spoiler Hydraulic Actuator | 1 | |
| K27017-46 | LOCK EQUIPMENT - SPOILER ACTUATOR, INBD/OUTBD | 8 | |
| K27047 | RMVL/INSTALL EQPT-SPOILERS AND FLAPERON HINGE PANELS | 1 | |
| K27047-1 | REMOVAL/INSTALLATION EQUIPMENT - SPOILERS AND FLAPERON HINGE PANELS (CE) | 9 | |
| K27051 | MEASURING TOOL-EMA POSITON,SPOILER | 1 | |
| K27051-1 | MEASURING TOOL - ELECTRIC MOTOR ACTUATOR POSITION, SPOILER | 7 | |
| K27051-10 | MEASURING TOOL - ELECTRIC MOTOR ACTUATOR POSITION, SPOILER | 10 | |
| K27059-1 | DISPATCH EQUIP - SPOILER ELECTRO MECHANICAL ACTUATOR (APPLICABLE TO 787-8 AIRPLANES WITH C99144-004 ACTUATOR INSTALLED) | 7 | |
| K6057 | CART - SERVICING, ENGINE OIL | 1 | |
| KHC-2173 | KIT, COUPLING ENGINE OIL | 10 | |
| KHC-2173 | KIT, COUPLING, ENGINE OIL | 10 | |
| KHC-2258 | KIT, COUPLING CSD OIL | 7 | |
| KHC-4003 | ADAPTER FOR THE MIL-H-5606 OIL FILLING DEVICE IN AMORTSTOYKI | 4 | |
| KHC1012 | SERVICING UNIT − SYNTHETIC OIL; KIT − COUPLING RESERVOIR HYDRAULIC | 12 | |
| KHC2173 | TRONAIR (USA) QUICK RELEASE COUPLER FOR DRIVE-GENERATOR OIL FILLING | 10 | |
| KHT9000-3 | HELICOIL HAND INSERTING TOOL, KEENSERTS | 1 | |
| KS5518 | ELECTROSONIC CLEANER, MAX 10KHZ (FOR P3 & OIL FILTER CLEANING) (KELL-STROM, E.G. KS5518) | 6 | |
| K‑3706 | ADAPTER FOR MIL-H-5606 OIL FILLING DEVICE FOR TRONAIR (USA) | 16 | |
| L100 | CART - TOILET/LAVATORY SERVICING (50 GAL), WASTE (100 GAL) WINTERIZED | 1 | |
| L19-106 | OIL COOLER INLET PLUG | 1 | |
| LC-063L-5 | SPRING COIL | 1 | |
| LCTC2121 | FWD OIL RING PULLER | 1 | |
| LCTC31126-0301 | FWD OIL RING PULLER POST SB 0113 | 1 | |
| LCTC4700 | FWD OIL RING PULLER | 1 | |
| LDT3812 | TRANS OIL LINE DISC TL FORD | 1 | |
| LDT830 | FORD OIL COOLER LINE DISC | 1 | |
| LDTM3812 | TRANS OIL COOLER LINE 3/8X1/2 | 1 | |
| LIL58850 | OIL PAN PLUG RETHRDING KIT | 1 | |
| LP3-110 | OIL COOLER INLET PLUGS, NSN 1730-01-554-0659 "COVER,AIRCRAFT GROUND SERVICING", NATO STOCK NUMBER: 1730-20-A0Y-8488 (set of 4) | 1 | |
| LP3-111 | OIL COOLER INLET PLUGS, heavy duty type, NSN 1730-01-525-0002 "SHIELD,AIRCRAFT GROUND SERVICING" (set of 4) | 1 | |
| LR1200 | Toilet Servicing Truck | 1 | |
| LSP-900 | TRUCK - TOILET/LAVATORY SERVICING 600 GAL. 2250 L | 1 | |
| LSP−900 | Truck − Toilet/Lavatory Servicing 600 gal. (2250 L) | 1 | |
| LT11308062 | 8L REFILLABLE TROLLEY,72IN,1870, SG, ENG OIL, PRV 30PSI | 1 | |
| LTCT100 | INSTALLING TOOL OIL SEAL | 1 | |
| LTCT1152 | INSTALLATION TOOL, OIL SEAL | 1 | |
| LTCT14794-01 | Fixture, Holding, Air/Oil Separator Gear Wrench | 1 | |
| LTCT30621-01 | Oil Instrumentation, Tube Assembly | 1 | |
| LTCT3094-01 | Heater Assembly, Coil Induction | 1 | |
| LTCT7202-01 | OIL TUBE FIXTURE PACKAGING: D-LM-008-036/SF-000 QAC:C | 1 | |
| LTCT7515-01 | Fixture, No. 3 Bearing Housing Support Oil Flow | 1 | |
| LTCT7558-01 | Fitting Assembly, Oil Flow Equipment | 1 | |
| LTCT7558-02 | Fitting Assembly, Oil Flow Equipment | 1 | |
| M0DEL150 | TURBINE OIL GUN | 5 | |
| M15360 | Extractor, Oil Inlet Adapter | 1 | |
| M16738 | SPOILER ACTUATOR PIN EXTRACTOR TOOL | 1 | |
| M2651-133-33 | Coupling-toilet drain | 1 | |
| M307 | TOOL - INSTALLATION, SAFETY CABLE, 0.032 INCH DIA CONTAINER - OIL RESISTANT, 5 U.S. GALLON (19 LITER) WRENCH - TORQUE | 2 | |
| M53693 | Oil Container ( Capacity 2 Liter ) | 1 | |
| M632V5000102 | OIL DRAINAGE FLEXIBLE HOSE | 1 | |
| MAFIS | Mitutoyo MAFIS - Mafis-Express - Aerofoil Inspection Software | 1 | |
| MALABAR 270 | CART - SERVICING, LG STRUT OIL, FLUID DISPENSER, 2 GALLON | 1 | |
| MALABAR 350 TURBINE OIL | MALABAR 350 TURBINE OIL / UNIT - 5 GALLON | 1 | |
| MALABAR MODEL 250 | MALABAR MODEL 250 – 2 GALLON TURBINE OIL DISPENSER OR EQUIVALENT | 1 | |
| MBHP-004 | MANUAL BOLT HOLE PROBE, .250"-.281" SPLIT END, 500KHz -2MHz UNSHIELDED W/ COLLAR, DIFFERENTIAL/REFLECTION D COIL, TRIAX FISCHER CONNECTOR, 1.5" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| MBHP-005 | MANUAL BOLT HOLE PROBE, .281"-.312" SPLIT END, 500KHz -2MHz UNSHIELDED W/ COLLAR, DIFFERENTIAL/REFLECTION D COIL, TRIAX FISCHER CONNECTOR, 1.5" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| MBHP-006 | MANUAL BOLT HOLE PROBE, .312"-.375" SPLIT END, 500KHz -2MHz UNSHIELDED W/ COLLAR, DIFFERENTIAL/REFLECTION D COIL, TRIAX FISCHER CONNECTOR, 2.0" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| MBHP-007 | MANUAL BOLT HOLE PROBE, .437"-.500" SPLIT END, 500KHz -2MHz UNSHIELDED W/ COLLAR, DIFFERENTIAL/REFLECTION D COIL, TRIAX FISCHER CONNECTOR, 2.0" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| MBHP-008 | MANUAL BOLT HOLE PROBE, .500"-.562" SPLIT END, 500KHz -2MHz UNSHIELDED W/ COLLAR, DIFFERENTIAL/REFLECTION D COIL, TRIAX FISCHER CONNECTOR, 2.0" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| MBHP-009 | MANUAL BOLT HOLE PROBE, .562"-.625" SPLIT END, 500KHz -2MHz UNSHIELDED W/ COLLAR, DIFFERENTIAL/REFLECTION D COIL, TRIAX FISCHER CONNECTOR, 2.0" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| MBHP-010 | MANUAL BOLT HOLE PROBE, .625"-.687" SPLIT END, 500KHz -2MHz UNSHIELDED W/ COLLAR, DIFFERENTIAL/REFLECTION D COIL, TRIAX FISCHER CONNECTOR, 2.0" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| MBHP-011 | MANUAL BOLT HOLE PROBE, .687"-.750" SPLIT END, 500KHz -2MHz UNSHIELDED W/ COLLAR, DIFFERENTIAL/REFLECTION D COIL, TRIAX FISCHER CONNECTOR, 2.0" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| MBHP-012 | MANUAL BOLT HOLE PROBE, .750"-.812" SPLIT END, 500KHz -2MHz UNSHIELDED W/ COLLAR, DIFFERENTIAL/REFLECTION D COIL, TRIAX FISCHER CONNECTOR, 2.0" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| MBHP-013 | MANUAL BOLT HOLE PROBE, .125"-.156" SPLIT END, 500KHz -2MHz UNSHIELDED W/ COLLAR, DIFFERENTIAL/REFLECTION D COIL, TRIAX FISCHER CONNECTOR, 1.5" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| MBHP-014 | MANUAL BOLT HOLE PROBE, .156"-.187" SPLIT END, 500KHz -2MHz UNSHIELDED W/ COLLAR, DIFFERENTIAL/REFLECTION D COIL, TRIAX FISCHER CONNECTOR, 1.5" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| MBHP-015 | MANUAL BOLT HOLE PROBE, .812"-.875" SPLIT END, 500KHz -2MHz UNSHIELDED W/ COLLAR, DIFFERENTIAL/REFLECTION D COIL, TRIAX FISCHER CONNECTOR, 2.0" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| MBHP-016 | MANUAL BOLT HOLE PROBE, .875"-.937" SPLIT END, 500KHz -2MHz UNSHIELDED W/ COLLAR, DIFFERENTIAL/REFLECTION D COIL, TRIAX FISCHER CONNECTOR, 2.0" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| MBHP-017 | MANUAL BOLT HOLE PROBE, .937"-1.000" SPLIT END, 500KHz -2MHz UNSHIELDED W/ COLLAR, DIFFERENTIAL/REFLECTION D COIL, TRIAX FISCHER CONNECTOR, 2.0" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| MBHP-018 | MANUAL BOLT HOLE PROBE,1.000"-1.062" SPLIT END, 500KHz -2MHz UNSHIELDED W/ COLLAR, DIFFERENTIAL/REFLECTION D COIL, TRIAX FISCHER CONNECTOR, 2.0" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| MBHP-019 | MANUAL BOLT HOLE PROBE,1.062"-1.125" SPLIT END, 500KHz -2MHz UNSHIELDED W/ COLLAR, DIFFERENTIAL/REFLECTION D COIL, TRIAX FISCHER CONNECTOR, 2.0" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| MBHP-020 | MANUAL BOLT HOLE PROBE,1.125"-1.187" SPLIT END, 500KHz -2MHz UNSHIELDED W/ COLLAR, DIFFERENTIAL/REFLECTION D COIL, TRIAX FISCHER CONNECTOR, 2.0" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| MBHP-021 | MANUAL BOLT HOLE PROBE,1.187"-1.250" SPLIT END, 500KHz -2MHz UNSHIELDED W/ COLLAR, DIFFERENTIAL/REFLECTION D COIL, TRIAX FISCHER CONNECTOR, 2.0" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| MBHP-022 | MANUAL BOLT HOLE PROBE,1.250"-1.312" SPLIT END, 500KHz -2MHz UNSHIELDED W/ COLLAR, DIFFERENTIAL/REFLECTION D COIL, TRIAX FISCHER CONNECTOR, 2.0" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| MBHP-023 | MANUAL BOLT HOLE PROBE,1.312"-1.375" SPLIT END, 500KHz -2MHz UNSHIELDED W/ COLLAR, DIFFERENTIAL/REFLECTION D COIL, TRIAX FISCHER CONNECTOR, 2.0" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| MBHP-024 | MANUAL BOLT HOLE PROBE,1.375"-1.437" SPLIT END, 500KHz -2MHz UNSHIELDED W/ COLLAR, DIFFERENTIAL/REFLECTION D COIL, TRIAX FISCHER CONNECTOR, 2.0" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| MBHP-025 | MANUAL BOLT HOLE PROBE,1.437"-1.500" SPLIT END, 500KHz -2MHz UNSHIELDED W/ COLLAR, DIFFERENTIAL/REFLECTION D COIL, TRIAX FISCHER CONNECTOR, 2.0" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| MBHP-026 | MANUAL BOLT HOLE PROBE,1.500"-1.562" SPLIT END, 500KHz -2MHz UNSHIELDED W/ COLLAR, DIFFERENTIAL/REFLECTION D COIL, TRIAX FISCHER CONNECTOR, 2.0" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| MD82RPS-3 | RIG PIN SET-FLT CONT & SPOILER | 1 | |
| ME11B34 | NEEDLE BEARING w/OIL SEAL | 1 | |
| ME7B133 | O-RING - OIL IMPREGNATED | 1 | |
| ME7B135 | OIL-RESISTANT O-RING | 1 | |
| MIL-L-21260 | PRESERVATIVE OIL CONTAINER 3.78 LT/1 GL | 1 | |
| MIL-PRF-6081E GRADE 1010 | JET ENGINE LUBRICATING OIL - 5 GALLON PAIL | 1 | |
| MIN7 | Plastic Foil Set - consists of 7 sheets of foil, 100µm - 300µm in thickness (0.003937 - 0.01181 ) and a size of 30 mm x 50 mm (1.18 in x 1.97 in) | 2 | |
| MIT65-45116 | B737 GROUND SPOILER RIG PIN | 17 | |
| MIT65B02250-6 | SPOILER LOCK PIN | 1 | |
| MIT69B82662-17 | SET - SOCKET ADAPTER, SPOILER ACTUATOR BOLT, USED ON INBD SPOILERS 5 THRU 8 | 1 | |
| MJK651-01 | SPOILER POSITION CHECKING TOOL | 1 | |
| MMEPD379 | SPECTROMETRIC OIL ANALYSIS SAMPLING KIT | 1 | |
| MOBILE | A320 TANK-ENGINE + APU MOBILE OIL FILLING UNIT | 1 | |
| MOBILE FILL UNIT | A320 Tank-Engine + APU mobile Oil Filling unit | 1 | |
| MODEL 150 | Dispenser - Oil, One Quart (1 Liter) Container | 5 | |
| MODEL 150QL-06-01-A | 1 QUART & 1 LITER TURBINE OIL O-C GUN | 1 | |
| MODEL 160 | GUN - OIL SERVICING FOR SKYDROL OR HYJET IV FLUIDS FOR AIRCRAFT HYDRAULIC SYSTEMS (MALABAR INTERNATIONAL) | 1 | |
| MODEL 170 | GUN - OIL SERVICING FOR MIL-H-5606 OR EQUIV. HYDRAULIC FLUIDS FOR AIRCRAFT STRUTS & HYDRAULIC SYSTEMS (MALABAR INTERNATIONAL) | 1 | |
| MODEL 250 | CART - SERVICING, ENGINE OIL | 3 | |
| MODEL 350 | 5 GALLON TURBINE OIL DISPENSER | 1 | |
| MODEL SD- 150 | HAND PUMP TURBINE OIL | 1 | |
| MODEL V-3A | GERIN OIL ANALYSIS TEST KIT | 1 | |
| MODEL150 | DISPENSER - OIL, ONE QUART (1 LITER) CONTAINER | 5 | |
| MODEL250 | CART - SERVICING, ENGINE OIL | 3 | |
| MODEL350 | Cart - Servicing, Engine Oil | 1 | |
| MODEL450 | Cart - Servicing, Engine Oil | 1 | |
| MP0037480 | OS105-130-12TC, - OIL RETAINER | 1 | |
| MRRP(30)-RUK-1-0.6825-70 | Mini rot prb-0.6825",30deg coil,70mmWL | 1 | |
| MRRP(30)-RUK-1-0.7450-70 | Mini rot prb-0.7450",30deg coil,70mmWL | 1 | |
| MRRP(30)-RUK-1-0.7606-70 | Mini rot prb-0.7606",30deg coil,70mmWL | 1 | |
| MRRP(30)-RUK-1-0.7762-70 | Mini rot prb-0.7762",30deg coil,70mmWL | 1 | |
| MRRP(30)-RUK-1-0.788-70 | Mini rotary probe with 30o coil, to fit | 1 | |
| MRRP(30)-RUK-1-0.8095-70 | Mini rotary probe with 30o coil, to fit | 1 | |
| MRRP(30)-RUK-1-0.8405-70 | Mini rotary probe with 30o coil, to fit | 1 | |
| MRRP(30)-RUK-1-0.8750-70 | Mini rotary probe with 30o coil, to fit | 1 | |
| MS 4001/380 | A STAND FOR FLUSHING TOILET SYSTEMS | 1 | |
| MS124698 | HELI-COIL INSERT | 1 | |
| MS21209F5-20L | HELICAL COIL INSERT | 1 | |
| MS28889-2 | SHOCK ABSORBER SERVICING ADAPTER (AIR /OIL) | 14 | |
| MS4001-380 | VACUUM TOILET CLEANING RIG TOOL | 1 | |
| MS4001/380 | VACUUM TOILET CLEANING SYSTEM - A320 | 1 | |
| MS51830-202 | HELICOIL REMOVING TOOL | 1 | |
| MS51923-291 | COIL SPRING 1/8x3/4LG st.st | 1 | |
| MSC2 | COIL SPRING COMPRESSOR | 1 | |
| MSL92708BTL | OIL DRAIN BOTTLE | 1 | |
| MTTL311-1 | 12IN BLACK COILED LEAD | 1 | |
| MTTL311-2 | 18IN BLACK COILED LEAD | 1 | |
| MTTL311-3 | 24IN BLACK COILED LEAD | 1 | |
| Model 110-12-17 | Temperature Recording Label (Oil Supply) | 1 | |
| Model 110-19-28 | Temperature Recording Label (Oil Supply) | 1 | |
| Model 110-34-44 | Temperature Recording Label (Oil Supply) | 1 | |
| N-2422-02 | GE-24-108 QUICK RELEASE NIPPLE FOR FILLING THE DRIVE-GENERATOR WITH OIL | 1 | |
| N-2422–02 | QUICK-RELEASE FITTING FOR FILLING THE GENERATOR DRIVE WITH OIL | 1 | |
| N/A | A320 Tank-Engine + APU mobile Oil Filling unit, also NEO | 5 | |
| N09-028 | EQUIPMENT, SILICONE OIL FILLING | 1 | |
| NDT3304 | BOEING 737 R&D REFERENCE STANDARD, 53-30-XX PART 6. MATERIAL: 2024-T3 CLAD, 1100 FOIL. Includes Test Report and Certificate of Conformance. | 1 | |
| NN-STD-1055 | CONTAINER OIL RESISTANT 5 GALLON | 1 | |
| NONE | GUN ENGINE OIL | 1 | |
| OCF16 | OILER 1 PINT FLEX | 1 | |
| OCF5 | BLUE-POINT® OILER | 3 | |
| OCR2 | OIL CAP REMOVAL/INSTALL TOOL | 1 | |
| ODP12R | MAGNETIC OIL DRAIN PLUG REMOVE | 1 | |
| ODP12RHD | HD MAGNETIC OIL DRAIN PLUG REM | 1 | |
| OF25-050 | OIL SEALING PLATE | 1 | |
| OFS2432 | OIL FILTR HOUSING SKT 24/32MM | 1 | |
| OFS36CAP | OIL FILTR HOUSING SKT 36MM | 1 | |
| OFS3847 | 14 POINT OIL FILTER SOCKET | 1 | |
| OFW4KT | OFW4KT- 4 PC OIL FILTER WRENCH SET (BLUE-POINT®) | 1 | |
| OHME65B00115 | HANDLING TOOL, REMOVAL AND INSTALLATION - INBOARD AND OUTBOARD SPOILERS | 6 | |
| OHME65B0015 | SPOILER SLING | 1 | |
| OIL-TANK-DRAIN | TRENT 700 OIL TANK DRAIN TOOL | 1 | |
| OMAT1024A | OIL - MINERAL - ROYCO 481 | 1 | |
| OMP 2506-3 | GE-24-108 QUICK RELEASE NIPPLE FOR FILLING THE DRIVE-GENERATOR WITH OIL | 22 | |
| OMP2505-3 | COUPLING DRAIN OIL I | 12 | |
| OMP2505-6 | COVER, DUST INTEGRATED OIL INDICATOR | 15 | |
| OMP2506-3 | COUPLING FILL OIL ID | 22 | |
| ORG1315 | INTERNATIONAL OIL RAIL GAUGE | 1 | |
| OT807690 | JUNCTION SPOILER FOR SAFRAN ARRIEL 2E ENGINE | 1 | |
| OTC4673-5 | 1-1/16IN 1IN OILPRESS UNIT SKT | 1 | |
| OTC6594 | FORD OIL LINE DISC TOOL 6.0L | 1 | |
| OTC6595 | FORD OIL LINE DISC TOOL 7.3L | 1 | |
| OU 190363 | OIL FILLING THS ACTIVATOR | 27 | |
| OU 190364 | OIL DRAINING TOOL | 23 | |
| OU190363 | OIL FILLING TOOL - THS ACTUATOR | 27 | |
| OU190363FL | TOOL-OILFILLING | 1 | |
| OU190364 | OIL DRAINING TOOL | 23 | |
| OU190364-320 | OIL DRAIN TOOL | 1 | |
| Olympus Delta DS-2000 XRF Analyser | Olympus Delta DS-2000 XRF Analyser - Accurately identify alloy graded and pure metals, Suitable for inexperienced operators, Modes for Lead in Paint, Filter Analysis and Soil Analysis | 1 | |
| P2D-L006 | Cable, Phasec 2D/3D to Foerster single coil probe (Lemo 00), Straight through wiring | 1 | |
| P392 | TWO SPEED, LIGHTWEIGHT HYDRAULIC HAND PUMP, 55 IN3 USABLE OIL | 5 | |
| P601-101 | ENGINE INLET & OIL COOLER PLUGS (set of 6) | 1 | |
| P601-120 | ENGINE AIR INLET & OIL COOLER PLUGS (SUPERSTAR MODEL) (set of 6) | 1 | |
| P60361 | COVER-SHIPPING, ENGINE AIR OIL HEAT EXCH EXIT DUCT | 1 | |
| P60373 | COVER, SHIPPING (OIL TANK PRESSURE TUBE) | 1 | |
| P60374 | COVER, SHIPPING (OIL SCAVENGE TUBE) | 1 | |
| P60375 | COVER, SHIPPING (OIL TUBES) | 1 | |
| P60382 | COVER-SHIPPING (OIL TANK PRESSURE TUBE) | 1 | |
| P60384 | COVER-SHIPPING (OIL BREATHER TUBE) | 1 | |
| P60391 | COVER-SHIPPING (OIL PUMP) | 1 | |
| P60393 | COVER-SHIPPING (OIL TUBE) | 1 | |
| P60415 | PROTECTOR, SHIPPING (OIL TANK) | 1 | |
| P60496 | COVER, SHIPPING - OIL TANK | 1 | |
| P9702127 | Special Tool C-130 HTR-Strainer Oil-In Test Wafer | 1 | |
| PA133 | AIR HYDRAULIC PUMP, 36 IN3 USABLE OIL, 8 IN3/MIN OIL FLOW AT 10,000 PSI | 6 | |
| PA28-105 | CARB. AIR or OIL COOLER INLET PLUG (each, specify model and year) | 1 | |
| PC12-101 | SMALL PLUGS SET (2 Oil Cooler Plugs, Gen. Blast Tube, ECM inlet & Engine Mount NACA scoops) (set of 9) | 1 | |
| PC12-102 | SMALL PLUGS SET (2 Oil Cooler Plugs, Gen. Blast Tube, ECM inlet) (set of 4) | 1 | |
| PC12-110 | SMALL PLUGS SET, 47E Next Gen Models (2 Oil Cooler Plugs, Gen. Blast Tube, ECM inlet & Engine Mount NACA scoops) (set of 9) | 1 | |
| PC12-111 | SMALL PLUGS SET, 47E Next Gen Models (2 Oil Cooler Plugs, Gen. Blast Tube, ECM inlet) (set of 4) | 1 | |
| PC21-110 | SMALL PLUGS SET (Oil Cooler, Gen Air, ACS RAM inlets) (set of 3) | 1 | |
| PC7-130 | OIL COOLER INTAKE PLUG, (similar to mfg p/n 9014-2013) | 1 | |
| PF3361-8PWS | ENGINE, CSD, APUIDG OIL DISPENSING EQUIP. | 1 | |
| PF53175 | STARTER FILLING ADAPTER (OIL DISPENSER ADAPTER) | 3 | |
| PF53361 | IDG/ENGINE OIL SERVICE CART | 2 | |
| PF53361-16P | SERVICING UNIT - ENGINE/VFG/APU OIL | 2 | |
| PF53361-16PWS | FILLER, ENGINE/VFG/APU OIL 2GL | 5 | |
| PF53361-2P | IDG Oil Servicing Cart | 4 | |
| PF53361-2PWS | DISPENSER - ENGINE OIL (2197) | 12 | |
| PF53361-48 | MALABAR BP2197-FILLING EQUIPMENT - TANK OIL | 2 | |
| PF53361-59 | 2G TURBINE OIL DISPE | 1 | |
| PF53361-8P | MALABAR 2 GALLON TURBINE OIL DISPENSER | 2 | |
| PF53361-8PWS | CART - SERVICING, ENGINE OIL | 5 | |
| PF53361-PWS | CSD TURBINE OIL DISP | 8 | |
| PF53361P | FLUID DISPENSER(ENGINE OIL)-2G/L | 9 | |
| PF53361−16PWS | SERVICING UNIT - ENGINE/VFG/APU OIL (2.0 U.S. GAL (7.571 L)) | 5 | |
| PF53361−2PWS | Oil Filler − Engine and IDG Hand Carry 2 gal | 12 | |
| PF534481-5PWS | ENGINE OIL SERVICING CART (IDG OIL FILL – 5 GAL) | 1 | |
| PF53467-1P | HYDRAULIC OIL DISPENSING EQUIP. | 2 | |
| PF53467-6P | UNIT - SKYDROL 500 B4 OIL SERVICING | 1 | |
| PF53467P | DG/CSD ENGIFN OIL REFURBISHING TANK | 1 | |
| PF53481-11P | CART - SERVICING, ENGINE OIL (GDC10109) | 1 | |
| PF53481-1PWS | FILLER, SERVICING UNIT, ENGINE/VFG/APU OIL (5.0 U.S. GAL (18.927 L) | 1 | |
| PF53481-2PWS | UNIT - LUBRICATION OIL SERVICING (5 U.S. GAL (18.927 L)) OMP 2506/3) | 3 | |
| PF53481-2PWS | ENGINE, CSD, APU OR IDG OIL DISPENSING EQUIP. | 3 | |
| PF53481-3P | DISPENSER - MALABAR 350 TURBINE OIL - 5 GALLON | 2 | |
| PF53481-5PWS | RESERVOIR SERVICE UNIT - ENGINE OIL OR MIL-H-5606, 5 GALLONS | 4 | |
| PF53481-8P | CART - ENGINE OIL SERVICING (5 GALLON CAPACITY) | 1 | |
| PF53481-8PWS | Cart - Servicing, Engine Oil | 5 | |
| PF53481-9P | UNIT-HYD. OIL MIL-H-5606 SERVICING, ON WHEELS, 5 GALLONS | 6 | |
| PF53481-9PWS | UNIT-HYD. OIL MIL-H-5606 SERVICING, ON WHEELS, 5 GALLONS | 3 | |
| PF53481−2PWS | Unit − Lubrication Oil Servicing (5 U.S. gal (18.927 L)) OMP 2506/3) | 3 | |
| PF53481−5PWS | Unit − Oil Engine and IDG Servicing 5 U.S. Gallons | 4 | |
| PF54115-6P | DISPENSER OIL (MALABAR INTERNATIONAL) | 2 | |
| PF54124-2P | CART - SERVICING, OIL | 1 | |
| PF54124-3P | CART SERVICING ENGINE OIL | 5 | |
| PF54124-3PWS | CONTAINER, HYD OIL SERVICING UNIT, | 3 | |
| PF54124-3PWS UNIT | HYDRAULIC OIL MIL-H-5606 SERVICING, HAND CARRY 2 GALLONS | 1 | |
| PF541243PWS | CONTAINER, HYD OIL SERVICING UNIT, 2 GAL | 3 | |
| PF54124−3PWS | Unit − Hand Carry Hyd. Oil Servicing (MIL−H−5606) 2 Gallons U.S. | 3 | |
| PF5545-1-2WS | OIL SERVING CART | 2 | |
| PF55451 | Cart-Servicing,Landing Gear Shock Strut Oil | 3 | |
| PF55451-1 | CART - SERVICING, STRUT OIL | 4 | |
| PF55451-1-2WS | OIL SERVING CART | 1 | |
| PF55451-23 | STRUT OIL DISPENSING EQUIP. MALABAR | 7 | |
| PF55451-23 | STRUT OIL DISPENSING EQUIP. | 7 | |
| PF55451-2WS | Cart - Servicing, Engine Oil | 2 | |
| PF55451-7WS | ENGINE OIL FILLER - 15 GALLON | 3 | |
| PF55951 | IDG- OIL SERVICING UNIT | 6 | |
| PFS3361-8PWS | HAND PUMP DISPENSER FOR QUART OR LITER CANS. SPECIFICALLY DESIGNED FOR ENGINE, APU OR IDG OIL. | 1 | |
| PL10 | MAGNETIZING COIL | 1 | |
| PLETF-050 | POLYDAMP® LOW EMISSIVITY TRI-FOIL FOAM LAMINATE. A..48" x 63" | 1 | |
| PMD737-38-001 | FITTING VACUUM TOILET | 1 | |
| PMU29-E | ENGINE OIL CART | 1 | |
| PMU29E - AT | MOBILE LUBRICATION OIL SERVICING CART | 1 | |
| PWA 27251 | ADAPTER MAIN GEARBOX BEARING OIL NOZZLES | 2 | |
| PWA 32878 | HOUSING-OIL FILTER SALVE | 1 | |
| PWA 46164 | OIL LEVEL INDICATOR | 1 | |
| PWA 7153 | FIXTURE OIL SCREEN HOLDING | 1 | |
| PWA104170 | PUSHER / PULLER -PIN, GEARBOX MOUNT/OIL TANK MOUNT | 1 | |
| PWA107032 | ADAPTER-MAIN GEARBOX VFG DRIVE OIL SEAL | 1 | |
| PWA107125 | ADAPTER-OIL DRAIN, ENGINE ASSEMBLY | 1 | |
| PWA107574 | KIT PRESERVATION ENGINE ASSEMBLY OIL SYSTEM | 1 | |
| PWA111744 | PULLER, HAND - ENGINE ASSY, LAYSHAFT OIL PLUG | 2 | |
| PWA14406 | MAIN OIL SCREEN | 7 | |
| PWA16477 | ENG MAIN OIL FILTER DRIFT | 4 | |
| PWA16477A | ENG MAIN OIL FILTER DRIFT | 6 | |
| PWA211137 | PULLER, MECHANICAL - MAIN GEARBOX, OIL NOZZLE | 2 | |
| PWA211159 | PULLER, MECHANICAL - MAIN GEARBOX, OIL NOZZLE | 4 | |
| PWA211314 | ADAPTER, INSTALLATION -SCAVENGE OIL PUMP | 2 | |
| PWA25257 | COVER - AGB OIL FLOW JET OUTER HOUSING_[PWA25257] | 2 | |
| PWA26078 | WRENCH - MAIN OIL PRESSURE RELIEF VALVE ADJUSTING | 3 | |
| PWA26525 | PULLER-MAIN OIL FILTER STRAINER | 2 | |
| PWA28142 | PULLER-GEAR OIL STRAINER ASSY_[PWA28142] | 3 | |
| PWA29109 | PULLER ANGLE GEARBOX OIL STRAIN | 1 | |
| PWA29646 | GAGE-INSPECTION AIRFOIL RADII | 2 | |
| PWA29786 | PULLER-ENGINE ASSEMBLY OIL STRAINER ELEMENT | 1 | |
| PWA32878 | HOUSING-OIL FILTER SALVE | 1 | |
| PWA46088 | GAGE - AIRFOIL RADII INSPECTION | 1 | |
| PWA46088 REV A | GAGE - AIRFOIL RADII INSPECTION | 1 | |
| PWA50486 | PUSHER,MAIN OIL PUMP | 1 | |
| PWA51192 | CAP, DRAIN, OIL TANK | 1 | |
| PWA80048 | PULLER KNOCKER DEOILER SEAL HOUSING | 2 | |
| PWA80168 | BASE GEARBOX CARBON SEAL RETAINER DEOILER | 1 | |
| PWA80185 | BASE GEARBOX SEAL RETAINER DEOILER | 1 | |
| PWA80186 | DRIFT GEARBOX CARBON SEAL INSTALLATION DEOILER | 1 | |
| PWA80222 | ADAPTER PULLER GEARBOX FACE SEAL ROTATING RING DEOILER | 1 | |
| PWA80278 | DRIFT ANGLE GEARBOX RADIAL DRIVE OIL DUCT INSTALLATION | 1 | |
| PWA80991 | PUSHER / PULLER -PIN, GEARBOX MOUNT/OIL TANK MOUNT | 1 | |
| PWA81055 | ADAPTER TORQUE OIL DUCT RETAINING NUT | 1 | |
| PWA81311 | FIXTURE - HOLDING, LOWER TOWERSHAFT AND OIL DUCT - PW2000 ENGINES | 1 | |
| PWA81439 | GUIDE-TAP DIFFUSER CASE HELICOIL INSERT | 1 | |
| PWA81441 | GUIDE REAMER-DIFFUSER CASE HELICOIL INSERT | 1 | |
| PWA81442 | REAMER,SPECIAL-DIFFUSER CASE-HELICOIL INSERT | 1 | |
| PWA81443 | REAMER, SPECIAL-DIFFUSER CASE-HELICOIL INSERT | 1 | |
| PWA81444 | REAMER SPECIAL DIFFUSER CASE HELICOIL INSERT BORESCOPE BOSS .7188 | 1 | |
| PWA81445 | REAMER SPECIAL DIFFUSER CASE HELICOIL INSERT BORESCOPE BOSS .7656 | 1 | |
| PWA83101 | WRENCH COVER/ GEARBOX OIL FILTER - PW2000 ENGINES | 3 | |
| PWA85267 | BASE - ASSEMBLY, GEARBOX; ROLLER BEARING INNER RACE; OIL AND SCAVENGE PUMP | 1 | |
| PWA85279 | DRIFT - DISASSEMBLY, GEARBOX, ROLLER BEARING INNER RACE, DEOILER (FRONT) | 1 | |
| PWA85451 | CONNECT-OIL SEALING VEHICLE A767 | 4 | |
| PWA85498 | ADAPTER - VACUUM CHECK, ENGINE GEARBOX DEOILER OUTLET | 1 | |
| PWA85525 | ADAPTER, HOT OIL-OIL FOLTER HOUSING INLET | 1 | |
| PWA85526 | ADAPTER-HOT OIL-ENGINE ASSEMBLY | 1 | |
| PWA85844 | ADAPTER-LEAK TEST-ENGINE ASSY OIL SYST STATIC CHECK | 2 | |
| PWA85853 | ADAPTER,TORQUE-ENGINE ASSY AIR OIL COOLER | 1 | |
| PWA86018 | ADAPTER-OIL SAMPLER ENGINE ASSY | 2 | |
| PWA88231 | PULLER - JACKSCREW, ENGINE ASSEMBLY, OIL TANK REMOVAL | 1 | |
| PWA88683 | BASE - ASSEMBLY, GEARBOX; ROLLER BEARING INNER RACE; OIL AND SCAVENGE PUMP | 1 | |
| PWC 50726 | OIL FILTER HOUSING PULLER | 8 | |
| PWC-30556 | KNOCK PULLER-ENGINE OIL FILTER | 9 | |
| PWC-50726 | KNOCK PULLER OIL FILTER HOUSING | 8 | |
| PWC03-001 | OIL, ENGINE | 1 | |
| PWC05-078 | OIL, OIL RELEASING | 1 | |
| PWC05078 | OIL, OIL RELEASING | 1 | |
| PWC30077 | PULLER, OIL DRAIN PLUG | 5 | |
| PWC30128-06 | PULLER, NO.4 BEARING PRESSURE/SCAVENGE OIL TUBES | 7 | |
| PWC30128-07 | PULLER;OIL FILLER TUBE BLANKING PLUG | 1 | |
| PWC30128-08 | PULLER OIL PUMP INLET COVER | 7 | |
| PWC30128-7 | T-HANDLE PULLER (REMOVAL OF ENGINE OIL TANK COVER) | 3 | |
| PWC30128-8 | PULLER, OIL PUMP INLET COVER | 2 | |
| PWC30314 | RGB Oil Press Fitting | 1 | |
| PWC30328 | PULLER, OIL FILTER HOUSING | 3 | |
| PWC30393 | FITTING, OIL NOZZLE | 4 | |
| PWC30535 | FITTING, OIL NOZZLE | 3 | |
| PWC30556 | KNOCKER PULLER - ENGINE OIL FILTER | 9 | |
| PWC30658 | Fitting Oil Nozzle | 1 | |
| PWC30831 | No. 2 Bearing Oil Flow Check Fitting | 2 | |
| PWC31382-01 | EXTRACTOR OIL SEAL ACCESSORY GEARBOX MAINSHAFT | 4 | |
| PWC31573 | PLUG, NO.4 BEARING HSG. COVER OIL PASSAGE | 1 | |
| PWC31574 | CAP , BLANKING, NO.4 BEARING HSG. COVER OIL PASSAGE | 1 | |
| PWC31664 | PULLER, INTERSHAFT OIL TRANSFER | 2 | |
| PWC31871 | ADJUSTING WRENCH, OIL PRESSURE RELIEF VALVE | 1 | |
| PWC32077 | FITTING, NOZZLE, OIL FLOW | 1 | |
| PWC32094 | FITTING, OIL NOZZLE | 2 | |
| PWC32113 | Fitting Oil scav to coller elbow | 1 | |
| PWC32263 | PLUG, OIL BLANKING | 1 | |
| PWC34460 | TRANSDUCER, MAIN OIL, PRESSUREE READ OUT | 1 | |
| PWC34520 | PULLER,OIL PRESS IND | 4 | |
| PWC37029 | FIXTURE, LOADING, OIL PUMP DRIVE SHAFT BEARING | 1 | |
| PWC37030 | ADAPTER, MEASURING, OIL PUMP SHAFT BEARING | 1 | |
| PWC37077 | ADAPTER-PULLING HYD PUMP OIL SEAL (V59603 | 10 | |
| PWC37077A | Adapter, Pulling, Oil Seal Carrier | 2 | |
| PWC37081 | PULLER - NO 2 BEARING / OIL COOLER | 4 | |
| PWC37554 | Puller, Oil Pump Inlet Cover | 5 | |
| PWC37726 | FIXTURE, LOADING, OIL PUMP TRANSFER SHAFT BEARING | 1 | |
| PWC37772 | Oil Drain Adapter | 14 | |
| PWC37772C | Oil Drain Adapter | 1 | |
| PWC37828 | ADAPTER, MEASURING, OIL PUMP TRANSFER BEARING | 1 | |
| PWC37834 | FIXTURE, OIL PUMP DRIVE SHAFT, HOLDING | 3 | |
| PWC37952 | PULLER, OIL PRESSURE REGULATING VALVE SLEEVE | 8 | |
| PWC38147 | FITTING-CHIP DETECTOR, FOR RGB OIL DRAINING | 14 | |
| PWC38147B | FITTING, DRAIN ENGINE OIL | 2 | |
| PWC38257 | FITTING OIL INLET | 1 | |
| PWC38380 | EXTRACTION OF OIL SEAL PLAIN FROM OIL SEAL CARRIER: DRIFT | 14 | |
| PWC41325-001 | PULLER-OIL DRAIN COVER, PRATT & WHITNEY CANADA | 2 | |
| PWC41382 | APU AC GENERATOR DRIVE OIL SEAL?? REMOVE/INSTALL | 3 | |
| PWC41383 | EXTRACTOR-OIL SEAL, ACCESSORY GEAR BOX MAINSHAFT | 3 | |
| PWC47207 | OIL AND BLEED FAIRING | 3 | |
| PWC48393 | ADAPTER ASSY AGB STATIC / OIL DRAIN | 1 | |
| PWC48421 | OIL TANK DRAIN ADAPT | 1 | |
| PWC50060 | INJECTOR, OIL | 7 | |
| PWC50726 | Oil Puller, Oil Filter Housing | 8 | |
| PWC50726-100 | PULLER OIL FILT HOUSIN | 4 | |
| PWC50726-200 | KNOCKER PULLER-OIL FILTER HOUSING | 2 | |
| PWC50762 | PULLER OIL PRESSURE INDICATOR RESTRICTOR | 1 | |
| PWC50781 | Puller, Oil Pressure Indicator Restrictor | 9 | |
| PWC50782 | Puller, Oil Pressure Indicator Restrictor | 9 | |
| PWC51382 | Puller Box Set(Oil press. Valve housing 26 pieces) | 1 | |
| PWC51382-100 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-110 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-150 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-160 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-200 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-210 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-250 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-260 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-300 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-310 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-350 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-360 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-400 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-410 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-450 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-460 | Puller (Oil press. Valve housing) | 5 | |
| PWC51382-500 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-510 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-550 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-560 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-600 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-610 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-650 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-660 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-670 | Puller (Oil press. Valve housing) | 1 | |
| PWC51382-680 | Puller (Oil press. Valve housing) | 1 | |
| PWC54386 | ADAPTER, MEASURING, OIL PUMP GEARSHAFT BACKLASH | 1 | |
| PWC54656 | PULLER, BEARING OIL PUMP DRIVE | 1 | |
| PWC56036 | FRIF OILSEAL INSTALL | 9 | |
| PWC56072 | COIL INSERT INSTALLATION TOOL | 8 | |
| PWC56097 | FIXTURE, LOADING, OIL PUMP DRIVE GEAR | 1 | |
| PWC56515 | OIL FLAPPER VALVE OPENING ROD | 9 | |
| PWC56517 | INSERTION IN OIL SEAL CARRIER: DRIFT | 9 | |
| PWC56869 | PUSHER EQUIV OIL SYSTEM PRIMING O/H | 1 | |
| PWC57154 | FITTING − CHIP DETECTOR, FOR RGB OIL DRAINING | 7 | |
| PWC57220 | JACKING SCREW OIL PUMP | 6 | |
| PWC57546 | HELICOIL INSERTION TOOL | 1 | |
| PWC60176 | MAIN OIL PRESS. | 1 | |
| PWC60866 | BASE, OIL PUMP HOUSING | 1 | |
| PWC62697 | ASSY-SLEEVE OIL NOZZLE-HOUSING | 1 | |
| PWC64453 | Oil Drain Collector | 1 | |
| PWC64605 | MAIN OIL PRESSURE ADJUSTMENT FIXTURE | 3 | |
| PWC65407 | Helicoil kit Installation Tool | 1 | |
| PWC68694 | PLAIN SEAL PULLER * (REQUIRED IF AGB OIL CONSUMPTION IS OVER 0.1CC PER HOUR) | 3 | |
| PWC68695 | PLAIN SEAL DRIFT * (REQUIRED IF AGB OIL CONSUMPTION IS OVER 0.1CC PER HOUR) | 3 | |
| PWC71798 | COIL-INDUCTION HEAT | 1 | |
| PWC72079 | Valve Oil Drains | 6 | |
| PWC72609 | OIL DRANING TOOL | 1 | |
| PWC90205 | HELICOIL INSTALLATION TOOL 3/8-24 | 1 | |
| PYT1500159 | 2CARABINER COIL TETHER W/SWIVE | 1 | |
| QCT-1000-10M/130WL | Equivalent to SPO-5000-10mm. Includes test report. 10mm diameter, Absolute coil. *130mm working length*. | 1 | |
| QCT-1000-9.5M | Equivalent to SPO-5000-9,5mm. Includes test report. Absolute dual-coil. 130mm overall length. | 1 | |
| R-D652P5001051 | OIL DRAIN HOSE | 1 | |
| R1191-3 | HELICOIL R1191-3 FREE RUNNING HELICAL INSERT, UNF, | 1 | |
| R1191-4 | HELICOIL R1191-4 FREE RUNNING HELICAL INSERT, 1/4-28X.375 UNF | 1 | |
| R1191-5 | HELICOIL R1191-5 FREE RUNNING HELICAL INSERT, 5/16"-24 X 15/16" UNF | 1 | |
| R1191-7 | HELICOIL R1191-7 FREE RUNNING HELICAL INSERT, UNF, 29/64 DRILL SIZE, 7/16-20 TAP | 1 | |
| R187A | SELF COILING CABLE | 1 | |
| R513-13 | HELICOIL INSERTS 14MM 1/2" | 1 | |
| RB PWC38147 | Oil Drain Tool | 1 | |
| RB T101549 | Transmission Oil Cooler Holding Fixture | 1 | |
| RB T101552 | Transmission Oil Cooler Bypass Valve Retaining Ring Gauge | 1 | |
| RB T101553 | Transmission Oil Cooler Sleeve Install Tool Set | 1 | |
| RB23003267 | KIT, CLEANING PT OIL NZ | 3 | |
| RB23007615 | KIT, CLEANING PT OIL NZ | 3 | |
| RB6796918 | Install Turbine & Exh Colct Support Oil Bellows Seal Dft | 2 | |
| RB6796920 | Oil Jet, Gas Generator Bearing Puller | 2 | |
| RB6798047 | Wrench-Oil Sump, Turbine | 2 | |
| RB6798048 | Pressure Oil Pump Body Bushing Ring | 2 | |
| RB6798049 | Scavenge Oil Pump Cover Bushing Plug Gauge | 2 | |
| RB6798050 | Lube Oil Pump Gearshaft Bushing Drift | 2 | |
| RB6798051 | Pressure Oil Pump Body Bushing Pin Jig | 2 | |
| RB6798052 | Scavenge Oil Pump Cover Bushing Pin Jig | 2 | |
| RB6798053 | Lube Oil Pump Gearshaft Bushing Jig | 2 | |
| RB6799841 | Press Oil Turbine Power Support Tube Assembly Cleaner Brush | 1 | |
| RB6893523 | Plate, Puller Oil Pump Shaft Bearing | 2 | |
| RB6893700 | PRESS NO. 8 BEARING OIL JET | 3 | |
| RB6893701 | No. 8 Bearing Oil Jet Puller | 1 | |
| RB6893739 | Puller-Rear Compressor Bearing Oil Slinger & Seal | 2 | |
| RB6897883 | Oil Filter Delta P Indicator Test Fixture | 2 | |
| RB910-0020 | XMSN OIL SYSTEM DRAIN TOOL | 2 | |
| RBE117-12001W3 | Oil Drain Hose | 2 | |
| RBE332A93-3681-00 | Oil Slinger Extractor | 2 | |
| RBE703A95-0507-00 | Main Gear Box Oil Dump Tube, Tool | 3 | |
| RBH9807 | MAIN TRANSMISSION OIL DRAIN TOOL | 1 | |
| RBPA003-A | Engine Oil Filter Sump Extractor | 2 | |
| RBT18023 | Oil Pump Bearing Replacement Work Aid | 1 | |
| RBT18524 | Oil Sump Straightening Tool | 2 | |
| RBT18584 | Transmission Oil Pump and Housing Assembly Work Aid | 1 | |
| RBT18584-1 | Transmission Oil Pump and Housing Assembly Work Aid | 1 | |
| RBT18584-2 | Transmission Oil Pump and Housing Assembly Work Aid | 1 | |
| RBT18610 | Transmission Oil Pump Seal Installer | 1 | |
| RBT18647 | C-BOX OIL DRAIN TOOL | 2 | |
| RBW1205G00231-3G | Main Rotor Damper Oil Filling Adapter | 2 | |
| RBW1205G00332-3G | Main Gear Box Oil Draining Hose | 2 | |
| RBW6305G00931-3G | Support Tool, Main Gear Box Oil Pump Ring Nut Removal/Install | 1 | |
| RBW6305G01052-3G | Wrench, Main Gear Box Oil Pump Ring Nut Removal/Install | 1 | |
| RBW6305G01132-3G | Tool Kit, Main Gear Box Oil Pump Disassembly/Assembly | 2 | |
| RBW6305G01431-3G | Tool, Main Gear Box Oil Pump Lockwasher Removal | 1 | |
| RBW6500X01611-W142E-3T | Oil Seal Housing Removal Puller | 1 | |
| RBW6521A00138-W142G-3T | INPUT OIL SEAL REMOVAL PRESS TOOL, IGB INPUT | 2 | |
| RBW6521A00138-W142H-3T | Input Oil Seal Insert Press Tool, Igb Input | 1 | |
| RBW6521A00138W142G-3T | Input Oil Seal Removal Press Tool, Igb Input | 2 | |
| RBW6521G00131-8G | OIL SEAL INSTALLATION / REMOVAL KIT | 2 | |
| RBW6522A00231-W142AJ-3T | Tail Rotor Gear Box/Servo Actuator Oil Seal Fit/Extracting Tool | 2 | |
| RBW6522A00231-W142H-3T | Tail Rotor Gear Box Input Oil Seal Removal And Press Tool | 1 | |
| RBW7839-2G | IGB & Tail Rotor Gear Box Oil Draining Hose | 2 | |
| RBWA353A04 | Pmc Oil Filling Quick Disconnect | 1 | |
| RFOSCKX01 | IDG OIL DRAIN OVERSPILL COLLECTION KIT | 1 | |
| RIN27608397000 | ACTUATOR SPOILER 1 AND 2 - REMOVAL/INSTALLATION | 1 | |
| ROYCO 555 | LUBRICATING OIL | 1 | |
| RRT028228 | LOCATION PIN - LINE UP BOLT HOLES IN FANCASE WHEN FITTING SURFACE OIL COOLERS | 2 | |
| RRT032367 | CRADLE OIL PUMP - INSTALL TOOL | 2 | |
| RRT042328-2 | HANDLE REM/INS. OIL SURFACE | 3 | |
| RRT050495 | OIL SFCE COOLER GUIDE PINS | 1 | |
| RRT058599 | VFG variable frequency generator and starter lubricating oil refueling tool | 6 | |
| RRT058600 | VFG OIL DRAIN TOOL | 4 | |
| RRT061249 | CRADLE - OIL PUMP. INSTALL / REMOVE OIL PUMP IN HORIZONTAL ORIENTATION | 1 | |
| RRT061249-1 | CRADLE - OIL PUMP. INSTALL / REMOVE OIL PUMP IN HORIZONTAL ORIENTATION. | 4 | |
| RRT063226 | 787 OIL - DRAIN TOOL | 2 | |
| RRT106176 | WRENCH-REMOVE INSTALL,OIL PUMP | 1 | |
| RRT127137 | OIL DRAIN COUPLING | 1 | |
| RST4329 | BEARING SWAGER USED ON SPOILERS SHAFER/REXNORD 77896-RST4329 | 1 | |
| S21521 | SPRING COIL | 1 | |
| S2290 | 1IN OIL PRESSURE SENSOR SOCKET | 1 | |
| S340-110 | ENGINE INLET PLUGS & OIL COOLER PLUGS (set of 6) | 1 | |
| S3808900120600 | SRAIN INSTL-TOILET | 1 | |
| S6152 | 1 1/16IN OILPRS SNDSWT C/FTWR | 1 | |
| SAME AS ON V2500/CFM | IDG OIL SERVICING | 1 | |
| SB7P376A0002-00 | ACTUATOR - SPOILER 3 THRU 7 DISTRIBUTOR BLOCK - REMOVAL/INSTALLATION | 1 | |
| SBA320-21-1098 | 10/32 HELICOIL INSERTION TOOL | 1 | |
| SCA 2 GAL-7FTOIL | IDG/ENGINE OIL SERVICING PUMP | 2 | |
| SCA-150 | IDG OIL SERVICING EQUIPMENT AND DRAINING HOSE | 1 | |
| SCA-150-1QT | TURBINE OIL GUN | 2 | |
| SCA-150-ENG | HAND PUMP TO ENGINE OIL | 1 | |
| SCA-7011 | HAND PUMP ENGINE OIL CSD | 2 | |
| SCA-7024 | PNEUMATIC ENGINE OIL DISPENSER (IDG MODEL SCA-7024IDG, HYDRAULIC MODEL SCA-7024HYD) | 1 | |
| SCA-ODA | OIL DISPENSER ADAPTER (MADE TO ENABLE OUT FILLING IN APU WITH IDG COUPLING) | 1 | |
| SCA2GAL-7FT0IL | IDG/CSD OIL REFURBISHING PUMP GAL/7.6L) | 2 | |
| SCA2GAL-7FTOIL | IDG/CSD engine oil refurbishing tank | 2 | |
| SCA2GAL-ENG | ENGINE OIL CONTAINER 2 GALLON ALUMINUM | 1 | |
| SCA2GAL‐7FTOIL | IDG/CSD OIL REFURBISHING PUMP GAL/7.6L) | 2 | |
| SE 72-6001 | Engine Oil Press Relief Vivadj Tool | 5 | |
| SE27-6002 | ADAPTER -0 SPOILER ACTUATOR CYLINDER TO REMOVE | 1 | |
| SE72-6001 | Adjusting Tool Assembly -Relief Valve. Oil Pressure | 5 | |
| SE7900745. | ENGINE AND IDG OIL REPLENISHING KIT | 1 | |
| SEC720000003A11 | Tool for removing rear oil cap | 1 | |
| SG 703A95-0520-01 | ENGINE OIL & HYDRAULIC FLUID DRAIN PLUG | 1 | |
| SG 8816540000 | ARRIEL OIL PRESSURE TAPPING TUBE MODULE | 1 | |
| SH001 | CART - SERVICING, OIL | 3 | |
| SK-1100-1 | PRESSURE DROP TUBE, OIL IN PORT | 1 | |
| SKIT001 | KIT - OIL SAMPLING | 1 | |
| SKU2008711 | ENGINE OIL COUPLING KIT | 1 | |
| SLC-110 | CART - TOILET/LAVATORY SERVICING (100 GAL.) WASTE (60 GAL.) WATER REPLENISH NON−WINTERIZED | 1 | |
| SLC110 | CART - TOILET/LAVATORY SERVICING (100 GAL WASTE/60 GAL WATER REPLENISH, NON- WINTERIZED) | 1 | |
| SLC−110 | Cart − Toilet/Lavatory Servicing (100 gal.) Waste (60 gal.) Water Replenish Non−Winterized | 1 | |
| SOEA-OD | 32 GALLON OIL DRAIN PAN | 1 | |
| SP0ILERRIGGINGKIT | SPOILER RIGGING KIT | 1 | |
| SP505236 | HELICOIL INSERT | 1 | |
| SP506513 | OIL PLUG W/ O-RING | 1 | |
| SP510314 | COILED SPRING PIN 3MMX8MM | 1 | |
| SP510380 | COILED SPRING PIN | 1 | |
| SP510381 | COILED SPRING PIN 6.35X38.1L | 1 | |
| SPECTRO-M/N-W | SOAP MACHINE SPECTROIL M | 1 | |
| SPL-10289 | ADAPTER LUBRICATION, SPOILER IUTER HINGE | 1 | |
| SPL-10892 | HOLD OPEN LOCK - INBOARD SPOILER ACTUATOR | 1 | |
| SPL-13652 | OIL DRAIN TOOL | 1 | |
| SPL-1744 | B737NG LOCK SET - INBOARD GROUND SPOILER ACTUATOR | 1 | |
| SPL-1829 | VALVE - DRAIN, LANDING GEAR SHOCK STRUT OIL | 1 | |
| SPL-8854 | ADAPTER - PULLER, OIL INLET COVER | 1 | |
| SPT-ES4040SS18-22/6WL | SPTech Dual Coil Hole Probe for Rohmann Elotest Standard, Stainless Steel, 18-22mm OD, 6" WL, 50-500KHz, Diff | 1 | |
| SPT-ES4040SS21/6WL/1M | SPTech Dual Coil Hole Probe for Rohmann Elotest Standard, Stainless Steel, 21mm OD, 6" WL, 250KHz-1MHz, Diff | 1 | |
| SPT-U4040SS15.8-18/6WL | SPTech Dual Coil Hole Probe for Stavely Spitfire, Stainless Shaft to Universal, 15.8 to 18mm, 6" WL, 50 to 500KHz, Diff | 1 | |
| SPT-U4040SS18-22/6WL | SPTech Dual Coil Hole Probe for Stavely Spitfire, Stainless Steel Shaft to Universal, Adjustable from 18 to 22mm OD, 6" WL, 50 to 500KHz, Diff | 1 | |
| SPT-U4040SS21/6WL/1M | SPTech Dual Coil Hole Probe for Stavely Spitfire, Stainless Shaft to Universal, 21mm OD, 6" WL, 250 KHz to 1MHz, Diff | 1 | |
| SPTech EMR-6M/180MWL | Hole Probe, Ø6mm,100KHz-1MHz, Reflection Coil x 180mm WL, Recessed Coils, Stainless Shaft/Plastic head for Mini Rotor | 1 | |
| SPTech EMRD-6M/180MWL | Hole Probe, Ø6mm,100KHz-1MHz, Differential x 180mm WL, Recessed Coils, Stainless Shaft/Plastic head for Mini Rotor | 1 | |
| ST-245 | BUSHING, PILOT, OIL RELIEF VAVE | 1 | |
| ST-295 | DRIFT, OIL SEAL PLUG INSTALLATION | 1 | |
| ST-383 | TOOL, CRANKSHAFT OIL SEAL INSTALLATION | 2 | |
| ST-46 | DRIFT, INSTALL CRANKSHAFT OIL PLUG ADQUIRIR | 1 | |
| ST1130 | HELI-COIL INSERTING TOOL | 1 | |
| ST1223C-DP-128-69-124 | COUNTERSINK POILT THREADED SHANK | 1 | |
| ST1223C-DP-160-69-124 | COUNTERSINK POILT THREADED SHANK | 1 | |
| ST1223C-DP-190-69-124 | COUNTERSINK POILT THREADED SHANK | 1 | |
| ST1223C-DP-198-69-124 | COUNTERSINK POILT THREADED SHANK | 1 | |
| ST1223C-DP-248-69-124 | COUNTERSINK POILT THREADED SHANK | 1 | |
| ST1223C-DP-260-69-124 | COUNTERSINK POILT THREADED SHANK | 1 | |
| ST1223C-DP-310-69-124 | COUNTERSINK POILT THREADED SHANK | 1 | |
| ST383 | TOOL, CRANKSHAFT OIL SEAL INSTALLATION | 2 | |
| ST551 | HELICAL COIL INSERT | 1 | |
| STD-1055 | CONTAINER - OIL RESISTANT, 5 GALLON (19 LITERS) | 1 | |
| STD-1058 | CONTAINER - OIL RESISTANT, 1 GALLON, (4 LITERS) | 1 | |
| STD-1154 | CONTAINER - OIL RESISTANT, 19L | 1 | |
| STD-199 | CONTAINER - OIL RESISTANT 2 U.S. GAL | 1 | |
| STD-203 | CONTAINER - OIL RESISTANT, 1 U.S.-GAL (3.8 L) | 1 | |
| STD-205 | CONTAINER - OIL RESISTANT, 5 U.S.-GAL | 1 | |
| STD-585 | MAT- PROTECTIVE, CLOSED CELL NEOPROPENE, 30-50 DURO, WEATHER AND OIL RESISTANT, 3/8 INCH MIN THICKNESS, MINIMUM 42 X 60 INCHES WITH WARNING STREAMERS | 6 | |
| STD1055 | CONTAINER - OIL RESISTANT, 5 GALLON | 1 | |
| STD205 | CONTAINER - OIL RESISTANT, 5 U.S.-GA | 1 | |
| STI3111 | SPECIAL WRENCH, MGB OIL PUMP RING NUT REM/INST | 1 | |
| T-01172931 | 1/4INx10FT POLY RECOIL HOSE | 1 | |
| T-215CHAN | OIL FILTER PLIERS2 1/2IN-5 1/2 | 1 | |
| T-635A | OIL FILTER WRENCH 3/8IN DR | 1 | |
| T-HOU1174112 | ONE PINT CUTTING OIL | 1 | |
| T-MG4500 | MINI OIL TRANSFER SYSTEM | 1 | |
| T213074 | IDG OIL SERVICING DISPENSER | 1 | |
| T2680002-18 | PENETRATING OIL BASIN | 1 | |
| T28-110 | OIL COOLER INLET PLUG | 1 | |
| T3591-4C500 | 1/4-28 LKG TGLS HELI-COIL INS ROHS | 1 | |
| T7055-01142-044 | ENGINE/TRANSMISSION OIL PRESSURE TEST BOX | 1 | |
| TA5026G001 | OIL PUMP CONTAINER | 1 | |
| TAP 1401140104/ | HELICOIL HAND INSERTING TOOL, HAND | 1 | |
| TAP 51 07 | HELICOIL HAND INSERTING TOOL, HAND | 1 | |
| TB48 | Oil impregnated bronze thrust bearing | 2 | |
| TB512 | Oil impregnated bronze thrust bearing | 1 | |
| TB612 | Oil impregnated bronze thrust bearing | 1 | |
| TC3015G001 | CONTAINER, OIL PUMP | 1 | |
| TCK | TheCanKey Black Plastic Church Key FOD Free Turbine Oil Can Opener | 1 | |
| TD-S-475 | BUCKET OIL DRAIN BUCKET 15 LT | 1 | |
| TD1032L | OIL INLET INSERTING TOOL | 3 | |
| TE38T-31001-2 | TOILET DRAIN MANOMET | 1 | |
| TE65B90115 | ADAPTER CABLE - ENGINE OIL QUANTITY, AIRPLANE WIRING | 1 | |
| TE65B91156 | CABLE - OIL TANK PROBE, ENGINE | 1 | |
| TEK-3005UFB3-10.3M/SS/104WL | Flexible Shaft Scanner Probe, 10.3mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-10.3M/SS/90WL | Flexible Shaft Scanner Probe, 10.3mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-10.7M/SS/90WL | Flexible Shaft Scanner Probe, 10.7mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-11.1M/SS/90WL | Flexible Shaft Scanner Probe, 11.1mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-11.5M/SS/90WL | Flexible Shaft Scanner Probe, 11.5mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-11.9M/SS/90WL | Flexible Shaft Scanner Probe, 11.9mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-5.1M/SS/90WL | Flexible Shaft Scanner Probe, 5.1mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-5.5M/SS/90WL | Flexible Shaft Scanner Probe, 5.5mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-5.9M/SS/90WL | Flexible Shaft Scanner Probe, 5.9mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-6.2M/SS/104WL | Flexible Shaft Scanner Probe, 6.2mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-6.3M/SS/90WL | Flexible Shaft Scanner Probe, 6.3mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-6.7M/SS/90WL | Flexible Shaft Scanner Probe, 6.7mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-7.0M/SS/104WL | Flexible Shaft Scanner Probe, 7.0mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-7.1M/SS/104WL | Flexible Shaft Scanner Probe, 7.1mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-7.1M/SS/90WL | Flexible Shaft Scanner Probe, 7.1mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-7.5M/SS/104WL | Flexible Shaft Scanner Probe, 7.5mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-7.5M/SS/90WL | Flexible Shaft Scanner Probe, 7.5mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-7.8M/SS/104WL | Flexible Shaft Scanner Probe, 7.8mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-7.9M/SS/104WL | Flexible Shaft Scanner Probe, 7.9mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-7.9M/SS/90WL | Flexible Shaft Scanner Probe, 7.9mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-8.3M/SS/104WL | Flexible Shaft Scanner Probe, 8.3mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-8.3M/SS/90WL | Flexible Shaft Scanner Probe, 8.3mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-8.6M/SS/104WL | Flexible Shaft Scanner Probe, 8.6mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-8.7M/SS/104WL | Flexible Shaft Scanner Probe, 8.7mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-8.7M/SS/90WL | Flexible Shaft Scanner Probe, 8.7mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-9.1M/SS/104WL | Flexible Shaft Scanner Probe, 9.1mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-9.1M/SS/90WL | Flexible Shaft Scanner Probe, 9.1mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-9.4M/SS/104WL | Flexible Shaft Scanner Probe, 9.4mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-9.5M/SS/104WL | Flexible Shaft Scanner Probe, 9.5mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-9.5M/SS/90WL | Flexible Shaft Scanner Probe, 9.5mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-9.9M/SS/104WL | Flexible Shaft Scanner Probe, 9.9mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-9.9M/SS/90WL | Flexible Shaft Scanner Probe, 9.9mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3038 | Special Hole Probe, 25KHz, Counterbore Interface Centered Coil, For 737 Strut Lower Chord Standard | 1 | |
| TEK-3042 | Special Bore Probe, 90° for 18° hole edge, elongated coil, AFT Fitting | 1 | |
| TEK-3047 | Special Bore Probe, 90° for 5° hole edge, elongated coil, FWD Fitting | 1 | |
| TEK-4055 | Ring Probe with Special Design Coil, NDT760 | 1 | |
| THCARA15SL 3/4IN | THCARA15SL 3/4IN SUPER COIL ANCHOR DUTY TETHER 15LB 42IN EXTENSION WITH | 1 | |
| THCARA25 1IN | THCARA25 1IN SUPER COIL ANCHOR DUTY TETHER 25LB,10FT EXTENSION WITH DROP | 1 | |
| THREAD UNF 10-32 / 9863-3 | FERRAMENTA INSERÇÃO HELICOIL | 1 | |
| THREAD UNF 8-36 / 9863-2 | FERRAMENTA INSERÇÃO HELICOIL PFER0134/18 | 1 | |
| TI-TAN | TITRA-LUBE TAN , LOT#BOX# USE BEFORE ENVIRONMENTAL TEST KITS( FOR TESTING OIL) COUNTRY OF ORIGIN: UNITED STATES | 1 | |
| TIC14120-15 | INBOARD GROUND SPOILER LOCK | 1 | |
| TIC14122 | INBD GROUND SPOILER | 1 | |
| TL037255 | FITTING, OIL DRAIN | 1 | |
| TL037255 | OIL DRAIN FITTING | 1 | |
| TL37255 | OIL DRAW FITTING | 2 | |
| TM1257G001 | ENGINE AND HYDRAULIC SYSTEM OIL DRAIN | 4 | |
| TM2292G001 | OIL PUMP CONDITIONING | 1 | |
| TM3199G002 | OIL PRESSURE INLET | 1 | |
| TM5244G001 | H125 OILING MEASURING TOOL | 2 | |
| TMH GA10-10-00 | TANK - ENGINE OIL FILLING UP | 2 | |
| TMH GA18 | Portable Turbine Oil Dispenser (MAX 150 PSI) | 1 | |
| TMH GA38-00-00 | NATO Test Box Mineral Oil & Nitrogen | 9 | |
| TMH GA57-00-00 | OIL FILLING UNIT- 5GAL | 1 | |
| TMH GA70 | NATO Test Box Mineral Oil | 1 | |
| TMH GA73 | NATO Test Box Mineral Oil & Nitrogen | 1 | |
| TMH GA73-00-00 | MINERAL OIL-NITOGEN NATO BOX | 2 | |
| TMHGA10-10-00 | TANK - ENGINE OIL FILLING UP | 2 | |
| TMHGA38-00-00 | NITROGEN AND/OR MINERAL OIL MIL-H5606 “NATO” BOX | 9 | |
| TMHGA57-00-00 | DISPENSER OIL ENGINE | 1 | |
| TMHGA73 | MINERAL OIL NATO BOX | 1 | |
| TMHGAC57-00-00 | DISPENSER OIL FILLING UNIT | 1 | |
| TMY20-38-001 | TOILET DRAINAGE ADAPTER | 1 | |
| TMY20-38-002 | TOILET FLUSHING ADAPTER | 1 | |
| TOILET | TOILET CLEANING RIG TOOL | 1 | |
| TOILET TEST BOX | TOILET CUBICLE TEST BOX AND DRAWINGS | 1 | |
| TOILETTANK | TOILET TANK CLEANING PLATE TOOL | 1 | |
| TP-2100 | AUTOMATIC KARL FISCHER OIL WATER CONTENT TESTING EQUIPMENT (TP-2100) | 1 | |
| TPEND95-6 | 90 Degree Pencil Probe, .500" Drop, Differential/Bridge coil, Coil in line with shaft, .125"Ø x 6" Long, 50-500Khz, Triax Connector | 1 | |
| TPND9125-6/2M | 90° Pencil Probe, .125" Drop, Differential/Bridge coil, Coil in line with shaft, .187"Ø x 6" Long, 500Khz-3Mhz, Triax Connector | 1 | |
| TRA-115 | INTAKE PLUG WITH OIL COOLER SCOOP PLUG, connected w/ lanyard (402) (set of 2) | 1 | |
| TRA-116 | INTAKE PLUG with OIL COOLER SCOOP PLUG, connected w/ lanyard (set of 2) | 1 | |
| TRA-117 | INTAKE PLUG with OIL COOLER SCOOP PLUGS, connected w/ lanyard (set of 3) | 1 | |
| TRI-HD-302R-G | 3 IN ROUND BOILER GAUGE WITH 1/2 IN MNPT CENTER BACK CONNECTION, 0 TO 200 PSI | 1 | |
| TSC-12A | TOILET SERVICING CART | 5 | |
| TSC-12A | TOILET SERVICING CART | 5 | |
| TUBE FLUSHING | FLUSHING TOILETTE | 1 | |
| U21-100 | ENGINE/OIL COOLER INLET PLUGS (set of 4) | 1 | |
| U21-103 | OIL COOLER INLET PLUGS (set of 2) | 1 | |
| U541483-T5B | FLUSHING FIXTURE, OIL | 1 | |
| U8629301 | ADAPTOR, BRIDGE AND REFLECTION COIL CONFIGURATION PROBES WITH 8 PIN BURNDY CONNECTOR TO NORTEC 500, 600, 10002000 INSTRUMENTS (16 PIN LEMO | 1 | |
| U8767317 | ADAPTOR, REFLECTION COIL CONFIGURATION PROBES WITH 12 PIN LEMO CONNECTOR TO NORTEC 500, 600,1000 OR 2000 SERIES INSTRUMENT (16 PIN LEMO)) FOR REFLECTION PROBE | 1 | |
| U8767318 | ADAPTOR, BRIDGE COIL CONFIGURATION PROBES WITH 12 PIN LEMO CONNECTOR TO NORTEC 500, 600, 1000 OR 2000 SERIES INSTRUMENT (16 PIN LEMO)) FOR BRIDGE PROBE. | 1 | |
| U8800091 | CABLE, LEMO TO LEMO. CABLE, 6 FOOT LENGTH, BRIDGE COIL CONFIGURATION,16 PIN LEMO TO FISCHER/LEMO TRIAX (SPO-6472) | 1 | |
| U8800538 | REFLEC. 16 PIN LEMO. SPO-6687 CABLE, REFLECTION COIL CONFIGURATION,PROBES WITH TRIAX FISCHER/LEMO CONNECTOR TO N600, N500, N1000N2000 INSTRUMENT (16PIN LEMO), 6 FT | 1 | |
| U8800738 | 9230259 16P LEMO TO MD WITH CA. CABLE, 6 FOOT (1.83 METER) LENGTH, 16 PINLEMO CONNECTOR TO MICRODOT CONNECTOR WITH 120UH BALANCE COIL (50KHZ). | 1 | |
| U8800739 | 9230585 16P LEMO TO MD WITH CA. 16 PIN LEMO TO MICRODOT WITH BALANCECOIL 8.2UH CABLE, 6 FOOT LONG (1.8M) FOR SINGLE COIL MICRODOT PROBES OPERATING BETWEEN 1MHZ - 2MHZ | 1 | |
| U999092 | HOSE - OIL TANK REPLENISHMENT/PRIMING | 2 | |
| UC1 6.2SS/35WL | Universal Rotor Countersink Probe, 6.2mm Pilot, 100 Degree, 100KHz-2MHz, Stainless, COIL AT MIDSPAN 35mm WL | 1 | |
| UC1 7.8SS/50WL | Universal Rotor Countersink Probe, 7.8mm Pilot, 100 Degree, 100KHz-2MHz, Stainless, COIL AT MIDSPAN 50mm WL | 1 | |
| UC1.156SS | Universal Rotor Countersink Probe, .156" (5/32) Pilot, 100 Degree, 100KHz-2MHz, Stainless, COIL AT MIDSPAN | 1 | |
| UC1.187SS | Universal Rotor Countersink Probe, .187" (3/16) Pilot, 100 Degree, 100KHz-2MHz, Stainless, COIL AT MIDSPAN | 1 | |
| UC1.218SS | Universal Rotor Countersink Probe, .218" (7/32) Pilot, 100 Degree, 100KHz-2MHz, Stainless, COIL AT MIDSPAN | 1 | |
| UC1.250SS | Universal Rotor Countersink Probe, .250" (1/4) Pilot, 100 Degree, 100KHz-2MHz, Stainless, COIL AT MIDSPAN | 1 | |
| UR 5.4SS-SL | Universal O-ring Scanner Probe, 5.4mm Dia. x 35mm WL, 100KHz-2MHz, Stainless Steel, .059" to coil center | 1 | |
| UR.125SS/1.1WL | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.125 INCH (3.18MM) DIAMETER, 1.1 INCH (2.79CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| UR.187SS/1.1WL | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.187 INCH (4.75MM) DIAMETER, 1.1 INCH (2.79CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| UR.250SS/2WL | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.250 INCH (6.35MM) DIAMETER, 2.0 INCH (5.08CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| UR.312SS/1.5WL | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.312 INCH (7.92MM) DIAMETER, 1.5 INCH (3.81CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| UR.375SS/1.5WL | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.375 INCH (9.53MM) DIAMETER, 1.5 INCH (3.81CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| UR.500SS | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.500 INCH (12.7MM) DIAMETER, 2.0 INCH (5.08CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| UT1145 | OIL FILLING ADPTR.ASSY | 1 | |
| UT630-1 | WRENCH-REMOVE INSTALL,OIL PUMP | 2 | |
| UT630-2 | WRENCH-REMOVE INSTALL,OIL PUMP | 13 | |
| UT818 | WRENCH-REMOVE INSTALL,OIL PUMP | 12 | |
| UT841 | WRENCH - REMOVE / INSTALL, OIL PUMP. | 8 | |
| UT954 | ADAPTOR/COUPLING - OIL TANK REPLENISHMENT/PRIMING | 8 | |
| UZ-7-1606-3 | IDG PUMP-1870 ENGINE OIL TOOL | 1 | |
| UZ/7/1606/3 | RE-OILING GUN | 1 | |
| UZ/7/1606/5 | HOSE - ENGINE OIL, REPLENISHING | 1 | |
| UZ/7/1826 | CART - SERVICING, ENGINE OIL | 4 | |
| UZ1825 | MAIN ENGINE RE - OIL GUN (INCOMPLETE) | 1 | |
| UZ7-1606-3 | ENGINE RE-OILING GUN ( 737 ) | 1 | |
| UZ719005 | OIL REPLENISHING GUN | 1 | |
| V150-1 | FILLING EQUIPMENT - TANK OIL | 1 | |
| V2505-08-005 | OIL OVERFLOW COUPLIN | 3 | |
| V2505J08-003 | OIL FILL COUPLING SIZE 8 RETURN LINE | 5 | |
| V2506-06-005 | Plug/Chain Assembly, Size -6, For Oil Fill Push-Pull Couplings | 6 | |
| V2506J-003 | COUPLING-OIL SERVICING | 1 | |
| V2506J-06-003 | COUPLING OIL FILL | 9 | |
| V2506J06-002 | COUPLER, ENGINE OIL | 1 | |
| V2506J06-003 | CSD OIL SERVICING COUPLING | 9 | |
| V2506J06-003-001 | OIL FILL COUPLING | 1 | |
| V2506J06-003-1 | OIL FILL COUPLING | 2 | |
| V2526J06-003 | Coupling-Oil Servicing-ILG, CSD | 1 | |
| V3A | GERIN OIL ANALYSIS TEST KIT | 2 | |
| VAC LAV CLEANER | AIRCRAFT VACUUM TOILET CLEANING SYSTEM | 1 | |
| VACLAV 1 | AIRCRAFT VACUUM TOILET CLEANING SYSTEM-KIT | 2 | |
| VACLAV 2 | AIRCRAFT VACUUM TOILET CLEANING SYSTEM-KIT | 1 | |
| VACLAV 4001 | AIRCRAFT VACUUM TOILET CLEANING SYSTEM | 2 | |
| VACLAV1 | AIRCRAFT VACUUM TOILET CLEANING SYSTEM | 2 | |
| VACLAV4001 | AIRCRAFT VACUUM TOILET CLEANING SYSTEM | 2 | |
| VC04184 | V-COIL P/N 04184 IMPERIAL UNC THREAD REPAIR INSERT WORKSHOP KITS - 1/4"-1/2" | 1 | |
| W174410-28 | DISPENSER – OIL, CONTAINER | 1 | |
| WB011017-01 | COVER HOUSING OIL COOLER | 1 | |
| WEELP1410AFZ | 1/4INX10FT PURECOILHSE 1/4MNPT | 1 | |
| WEELP1415AFZ | 1/4INX15FT PURECOILHSE 1/4MNPT | 1 | |
| WEELP1420AFZ | 1/4INX20FT PURECOILHSE 1/4MNPT | 1 | |
| WEELP1425AFZ | 1/4INX25FT PURECOILHSE 1/4MNPT | 1 | |
| WF150-1 | Dispenser - Oil, One Quart (1 Liter) Container | 8 | |
| WF150-3 | FILLER OIL ENGINE AND ADG | 1 | |
| WF150-5 | FILLER ,ENGINE OIL | 7 | |
| WF150???1 | SERVICING UNIT ??? 1 QUART IDG AND ENGINE OIL | 8 | |
| WF150−1 | Servicing Unit − 1 Quart IDG and Engine Oil | 8 | |
| WF150−5 | SERVICING UNIT - ENGINE/VFG/APU OIL (1.0 U.S. QT (0.946 L)) | 7 | |
| WF160 | DISPENSER OIL (MALABAR INTERNATIONAL) | 1 | |
| WF170 | Servicing Unit − 1 Quart MIL−H− 5606 Hydraulic Oil | 1 | |
| WF174410 | SERVICING UNIT - IDG AND ENGINE OIL | 4 | |
| WF174410-18 | UNIT, SERVICING ENGINE/VFG/APU OIL | 6 | |
| WF174410-24 | MALABAR 150 TURBINE OIL GUN - ENGINES, APU, CSDS, IDGS | 1 | |
| WF174410-28 | GUN,1/4 OIL REPLENISH-ING-ENGINE | 1 | |
| WF174410-3 | DISPENSER OIL (MALABAR INTERNATIONAL) | 2 | |
| WF174410-35H | MALABAR 150 TURBINE OIL GUN | 1 | |
| WF174410-4 | DISPENSER OIL (MALABAR INTERNATIONAL) | 2 | |
| WF174410-52H | OIL INJECTOR 150-130H, WF174410-52H MALABAR | 2 | |
| WF174410-9 | DISPENSER - OIL, ONE QUART (1 LITER) CONTAINER MODEL 150 | 1 | |
| WF174410-9 | MODEL 150 DISPENSER - OIL, ONE QUART (1 LITER) CONTAINER | 1 | |
| WF174410−18 | FILLER − ENGINE AND IDG OIL (1 QUART (0.95 L)) | 6 | |
| WSPL 11 | SHOCK STRUT FEELING OIL ADAPTER | 1 | |
| WST 0841 | HELICOIL THREAD REPAIR KIT THREAD REPAIRING WORKSHOP KITS (M5 M6 M8 M10 M12) - 140 PCS | RAPI-COIL® | 1 | |
| WTHCARA25 | 1IN SUPERCOIL 2SST | 1 | |
| XB5731 | TREATING COIL | 1 | |
| XB57313 | TREATING COIL | 1 | |
| Y11-105 | OIL COOLER INLET PLUG | 1 | |
| Y3-120 | OIL COOLER INLET PLUGS (in wing root) (set of 2) | 1 | |
| Y52-105 | OIL COOLER INLET PLUG (under right wing) | 1 | |
| YA4050B | OIL FILTER PLIERS (BLUE-POINT®) | 1 | |
| YA4274A | OIL FILTER SLIP JOINT PLIERS | 1 | |
| ZODP16 | Oil Drain Pan 16Ltr Capacity | 1 | |
| ZOLP16 | Oil Lube Dispenser C/W 16Ltr Container | 1 | |
| ZOM20 | Digital In-Line Oil Meter 1/2" BSP (F) | 1 | |
| lC569l | PULLER NO. 6 BEARING INNER RING & ROTATING OIL SEAL | 1 | |
| 0U190363 | TOOL-OIL FILLING,THS ACTUATOR | 27 | |
| 98D2760300200 | SPOILER MAINTENANCE KEY | 1 | |
| 98D27603002001 | KEY-SPOILER MAINTENANCE | 30 | |
| D12-10 | CALIBRATING OIL,STANDARD | 1 | |
| D12-30 | CALIBRATING OIL,STANDARD | 1 | |
| КHC-4003 | OIL (MIL-H-5606) SERVICING UNIT 06-5022-6500, ADA | 1 | |
| 98A27601021000 | RIGGING PIN,INNER SPOILER,AIRBRAKE CONTR | 2 | |
| PWA26078 | WRENCH-MAIN OIL PRESS RELIEF VALVE ADJ | 3 | |
| PWA26525 | PULLER - MAIN OIL FILTER STRAINER | 2 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
