| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 79102 | NUT LOCK | 1 | |
| 482061 | NUT LOCK | 5 | |
| 81270700 | NUT LOCK | 1 | |
| 81271700 | NUT LOCK | 1 | |
| F72951-48 | Nut Lock | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 00061-2305-0001 | LOCKNUT WRENCH | 1 | |
| 00061-2305-0001PM | WRENCH - BEARING LOCKNUT | 1 | |
| 00711094M | MAIN NUT LOCKING WRENCH | 1 | |
| 04-HNX-3/32IN | WEDGELOCK FASTENER - 3/32 HEX BODY FASTENER (NUT TYPE; STANDARD SIZE) | 1 | |
| 04-WNX-1/4IN-KIT | NUT-TYPE WEDGE LOCK 1/4" | 1 | |
| 04-WNX-1/8 IN -KIT | NUT-TYPE WEDGE LOCK 1/8" | 1 | |
| 04-WNX-3/16IN-KIT | NUT-TYPE WEDGE LOCK 3/16" | 1 | |
| 04-WNX-5/16IN-KIT | NUT-TYPE WEDGE LOCK 5/16" | 1 | |
| 07482-21C49P011 | WRENCH, PGB STRUT TURNBUCKLE LOCKNUT | 1 | |
| 07482-2C90503P01 | WRENCH, PGB STRUT TURNBUCKLE LOCKNUT | 1 | |
| 0UT167-02 | COUNTERCLOCKWISE THREADING NUT | 1 | |
| 1-02237A | LOCKNUT, 1/4-20 NYLON INSERT | 1 | |
| 1-20633A | LOCKNUT 3/8-16 | 1 | |
| 1-20933A | NUT LOCK M18-1.5 S/A 1-24833A | 1 | |
| 1-22133A | LOCKNUT 5/8-11 | 1 | |
| 1-24333AR | NO.4-40 HEX NUT W LOCKWASHER | 1 | |
| 10-32 NI | NYLON LOCK NUT | 1 | |
| 100-51961 | Bearing Lock Nut Spanner Tool | 1 | |
| 101876-50 | LOCK NUT 50-50UNF | 1 | |
| 1085281-24 | NUT, SELF-LOCKING, SET 24 PCS. | 1 | |
| 109-3101-22-1 | WRENCH, LOCKING COUNTER NUT PART | 1 | |
| 10C1010G01 | TORQUE ADAPTER, INSTALL AND REMOVE - NO. 3 BEARING LOCK NUT, | 1 | |
| 10C2060 | WRENCH, CVT AFT LOCKNUT | 1 | |
| 11C3053 | ADAPTER - TORQUE-INSTALL/REMOVE NO 3 BEARING LOCKNUT | 1 | |
| 11C3204 | ADAPTER - TORQUE LOCKNUT - NO 1 BRG | 1 | |
| 11C4823G01 | ADAPTER, TORQUE - NO. 2 OUTER LOCKNUT | 1 | |
| 1295 | LOCK NUT, KNOB | 1 | |
| 139W00-542-00 | BENDING TOOL (FOR LOCKING PLATE OF ANTI-RATTLE NUT) | 1 | |
| 15O308 | NUT,SELF-LOCKING,HEXAGN | 3 | |
| 17955-0025 | 1-14 UNF LOCK NUT | 1 | |
| 17A6064P17 | NUT, SELF LOCKING | 1 | |
| 18C1516 | FIXTURE, TORQUE - NO. 1 BEARING OUTER RACE LOCKNUT | 1 | |
| 18C1531 | FIXTURE, TORQUE - NO. 3 BALL BRG OUTER RACE LOCKNUT | 1 | |
| 18C1569 | ADAPTER, TORQUE - LOCKNUT, PMA | 1 | |
| 1922 | LOCKNUT SOCKET, 3/4 | 24 | |
| 18733 | HEX FLANGE LOCK NUT | 1 | |
| 0000052370 | NUT,SELF-LOCKING | 1 | |
| 0000071570 | LOCKING NUT | 1 | |
| 0000080640 | SELF-LOCKING NUT | 1 | |
| 0000080650 | SELF-LOCKING NUT | 1 | |
| 150298 | NUT: NYLOCK,1/4-28, | 1 | |
| 150308 | NUT, NYLOCK, 3/8-24 | 3 | |
| 150466 | NUT, SHELF LOCKING 7/17, | 1 | |
| 150586 | NUT: NYLOCK,1/2-20, | 1 | |
| 1012394 | REDUCTION GEARBOX-TORQUE LOCK/RETAINING NUTS | 1 | |
| 1016291 | SPANNER K LOCK BLUE NUT NSA5182-3 | 1 | |
| 1900129 | LOCKNUT SPANNER | 1 | |
| 1900132 | LOCKNUT SPANNER | 1 | |
| 1900729 | LOCKNUT AND SHAFT FIXTURE | 1 | |
| 1C6793G01 | WRENCH, TORQUE BREAK - VSV LOCKNUT | 1 | |
| 1C6794P01 | WRENCH, TORQUE - VSV LOCKNUT | 1 | |
| 1C9428G01 | Wrench, VSV Locknut Torque Break | 1 | |
| 21C1186P010 | WRENCH TIEBOLT LOCKNUT TO REAR SHAFT | 1 | |
| 21C1187G001 | WRENCH TIEBOLT LOCKNUT TO ROTOR | 1 | |
| 21C1351G001 | #3 BEARING LOCKNUT WRENCH -SPANNER | 1 | |
| 21C1352G001 | #4 BEARING LOCKNUT WRENCH-SPANNER | 1 | |
| 21C1361G001 | #1 BEARING LOCKNUT WRENCH-SPANNER | 1 | |
| 21C1362G002 | #2 BEARING LOCKNUT SPANNER | 1 | |
| 21C49P011 | WRENCH, PGB STRUT TURNBUCKLE LOCKNUT | 1 | |
| 21C7008G01 | NO 3 BEARING LOCKNUT SPANNER WRENCH | 1 | |
| 21C8886G01 | WRENCH,LOCKNUT,HORIZONTAL | 1 | |
| 240880 | EXTRACTING NUT M6 ASSY ., FOR CRANKSHAFT LOCKING SCREW M8*50 | 1 | |
| 2561517 | Wrench, operating lever locknut | 2 | |
| 23003262 | LOCKNUT CRIMPER GASIFIER TURBINE | 2 | |
| 23004324 | TRUST NUT LOCK INSTALLATION GAUGE | 2 | |
| 23054815 | DIMPLE, CUPLOCK - FWD LP TURBINE SHAFT RETAINING NUT | 2 | |
| 23055269 | Dimpler – Cuplock Washer, Gas Generator Retaining Nut | 1 | |
| 0249151160 | LOCKING NUT | 1 | |
| 0268700490 | LOCK NUT | 1 | |
| 0292900140 | LOCK,NUT | 1 | |
| 0421500290 | SELF LOCKING SHAFT NUT | 1 | |
| 12390381001 | Lock nut 1 1/2-12 | 1 | |
| 2309- T006-001 | SOCKET - REMOVAL/ INSTALLATION LOCK NUT | 14 | |
| 2309-T006-001 | SOCKET- REMOVAL/IN-STALLATION, LOCK NUT | 14 | |
| 2309T006-001 | SOCKET - REMOVAL/INSTALLATION LOCK NUT | 14 | |
| 2353M52P01 | NUT SELF LOCKING | 1 | |
| 2468M31P01 | NUT, SELF-LOCKING - SPLINE DRIVE, SOLID FILM LUBRICATED | 1 | |
| 2468M31P03 | NUT, SELF-LOCKING- SPLINE DRIVE, SOLID FILM LUBRICATED | 1 | |
| 269A9224 | Wrench Nas1441-9 Locknut Installation | 1 | |
| 269T1221 | Socket Pitch Bearing Locknut Main Rotor | 1 | |
| 269T1221P | SOCKET PITCH BRG. LOCKNUT M/R | 1 | |
| 269T9307 | Wrench, 269A6258 Locknut Installation | 1 | |
| 269T9331 | Idler Pulley Bearing Locknut Installation | 1 | |
| 279326 | NUT LOCKING | 2 | |
| 28-0-5255 | F100 ADAPTER LOCKNUT | 1 | |
| 2C5192G01 | WRENCH, Nº 2 BEARING LOCKNUT SPANNER | 1 | |
| 2C5232 | FIXTURE, HPT ROTOR LOCKNUT | 1 | |
| 2C5232P01 | FIXTURE, HPT LOCKNUT CHECKING | 1 | |
| 2C5237G01 | WRENCH, HPT LOCKNUT SPANNER | 1 | |
| 2C5241 | ADAPTER FAN SHAFT LOCKNUT | 1 | |
| 2C5241G01 | WRENCH - LOCKNUT DRIVE | 1 | |
| 2C5242G01 | WRENCH #1 - BEARING LOCK NUT | 1 | |
| 2C5242G02 | WRENCH, NO. 1 BEARING LOCKNUT SPANNER | 1 | |
| 2C5820G01 | WRENCH, HPT STAGES 1 AND 2 LOCKNUT TORQUE | 1 | |
| 2C6062P24 | NUT, LOCKING | 1 | |
| 2C6251 | PULLER SPLIT NUT LOCK RING: | 1 | |
| 2C6251G02 | NO. 4 BRG SPLIT NUT LOCK RING PULLER | 1 | |
| 2C625I | PULLER SPLIT NUT LOCK RING: | 1 | |
| 2C6806 | WRENCH HPT ROTOR LOCK NUT | 1 | |
| 2C6806G01 | WRENCH, HPT ROTOR, LOCKNUT | 2 | |
| 2C81046G01 | ADAPTER, LPT-TO-FAN DRIVE SHAFT LOCKNUT TORQUE (LOCKNUT WRENCH) | 2 | |
| 2C81050G01 | WRENCH, NO. 5 BEARING LOCKNUT | 3 | |
| 2C81103 ADA | ADAPTER - TORQUE - LOCKNUT - FAN TO FAN DRIVESHAFT | 1 | |
| 2C81156 | WRENCH, RATCHET LOCKNUT HPCR | 1 | |
| 2C81156G01 | WRENCH, RATCHET LOCKNUT HPCR | 1 | |
| 2C81407 | HPT, LOCKNUT-TORQUE ADAPTER | 1 | |
| 2C81407G02 | (FUTURE PROCUREMENT P/N: 2C81407G03) ADAPTER, TORQUE – HPT LOCKNUT | 1 | |
| 2C81407G03 | ADAPTER, TORQUE – HPT LOCKNUT | 1 | |
| 2C81407G04 | ADAPTER, HPT LOCKNUT TORQUE | 1 | |
| 2C81434G02 | ADAPTER, HPT LOCKNUT TORQUE | 1 | |
| 2C81463G01 | ADAPTER, TORQUE - HPT LOCKNUT (TORQUE ADAPTER) | 1 | |
| 2C81463G02 | ADAPTER, TORQUE - HPT LOCKNUT | 1 | |
| 2C81464 | ADAPTER TORQUE - HPT LOCKNUT | 1 | |
| 2C81464G01 | ADAPTER, TORQUE - HPT LOCKNUT | 1 | |
| 2C81505 | ADAPTER, TORQUE - NO.1 BEARING LOCKNUT | 1 | |
| 2C81505G01 | ADAPTER, TORQUE - NO.1 BEARING LOCKNUT | 1 | |
| 2C81625P01 | ADAPTER-TORQUE, LOCKNUT, (TORQ | 1 | |
| 2C81665G01 | ADAPTER, TORQUE, LOCKNUT, AXIS | 1 | |
| 2C81666G01 | ADAPTER, TORQUE, LOCKNUT AXIS | 1 | |
| 2C81667G01 | ADAPTER, TORQUE, LOCKNUT, AIR/ | 1 | |
| 2C90503P01 | WRENCH, TURNBUCKLE LOCKNUT SPANNER | 1 | |
| 2C91076G01 | WRENCH LPT ROTOR LOCKNUT | 1 | |
| 2C91076P06 | WRENCH LPT ROTOR LOCKNUT | 1 | |
| 2C91102G01 | ADAPTER, HPT ROTOR LOCKNUT SPANNER WRENCH | 1 | |
| 2C91125 | #5 BEARING LOCKNUT WRENCH | 1 | |
| 2C91125G01 | ADAPTER-SPANNER LOCKNUT | 1 | |
| 2C91169G01 | ADAPTER-TORQUE LOCKNUT | 1 | |
| 2C91217G01 | ADAPTER-TORQUE-LOCKNUT | 1 | |
| 2C91218G01 | WRENCH-SPANNER-LOCKNUT | 1 | |
| 2C91323G01 | ADAPTER - #1 BEARING - LOCKNUT | 1 | |
| 2C91349G01 | ADAPTER, HPT LOCKNUT TORQUE | 1 | |
| 2MIT100T3480-27 | LOCKNUT, NYLON INSERT | 1 | |
| 3/4 LOCKNUT | 3/4 LOCKNUT | 1 | |
| 3/4-12UNC | LOCKNUT | 1 | |
| 332A93-3226-22 | SHURLOCK NUT SPANNER "PINION 23000T" | 1 | |
| 332A93-3229-00 | EXTRACTOR, LOCK NUT | 1 | |
| 332A93-3237-00 | REMOVAL AND UTILISATION LOCK NUT | 1 | |
| 332A93-3237-111 | REMOVAL,LOCK NUT,ASSY | 1 | |
| 332A93-3501-00 | IGB TAIL ROTOR GEAR BOX FLANGER LOCKNUT | 1 | |
| 332A93-3695-00 | KIT OF TIGHTENING NUT SHUR- LOCK BTA | 1 | |
| 332A93350100 | IGB TAIL ROTOR GEAR BOX FLANGER LOCKNUT | 1 | |
| 332А93-3233-03C. | A TOOL FOR BREAKING THE LOCK NUT | 1 | |
| 332А93-3235-00 | TOOL FOR INSTALLING THE NUT LOCK | 1 | |
| 355A93-3240-00 | M50 NUT LOCKING EXTRACTOR | 2 | |
| 355A93-3241-20 | "STALOCK" NUT WRENCH | 1 | |
| 365A93-3240-21 | STA-LOCK NUT ADAPTOR | 1 | |
| 365A93-3350-00 | M 54 LOCK NUT EXTRACTOR | 1 | |
| 365A93-3351 | SPECIAL SHUR-LOCK NUT ADAPTOR | 1 | |
| 365A93-3351-00 | SPECIAL SHUR LOCK NUT | 1 | |
| 365A93324021 | STA-LOCK NUT ADAPTOR | 1 | |
| 365A93324021/PHP | STA-LOCK NUT ADAPTOR | 1 | |
| 365A93335000 | M 54 LOCK NUT EXTRACTOR | 1 | |
| 365A93335100 | SPECIAL SHUR LOCK NUT | 1 | |
| 3G6205G26551 | MAIN ROTOR SCISSOR LOCKNUT | 1 | |
| 4023115 | NUT SELF LOCKING | 1 | |
| 4046T32P01 | NUT - SELF-LOCKING | 1 | |
| 42FW1018 | NUT SEFT LOCKING | 1 | |
| 437-02 | SAFETY LOCK NUT | 1 | |
| 5553 | LOCK NUT | 1 | |
| 482061 | LOCKNUTZ | 5 | |
| 5-16-24 | NUT: LOCK, | 1 | |
| 501115 | Prop Shaft, Nut lock Checking | 1 | |
| 509491 | WRENCH FOR LOCKNUT | 1 | |
| 558-1-05842 | ASSY. BASE - SHAFT LOCKNUT | 1 | |
| 55T106907-MIT-001 | RUDDER LOCKNUT SOCKET | 1 | |
| 601R35072-1 | LOCKNUT | 1 | |
| 612-204 | LOCK NUT | 1 | |
| 63001002-2 | LOCKNUT TORQUE TOOL | 1 | |
| 63001002-3 | Locknut Torque Tool | 1 | |
| 780017 | SET UP LOCKING, UNLOCKING NUT | 1 | |
| 6796530 | LOCKNUT SPANNER WRENCH | 3 | |
| 6798046 | WRENCH-BEARING LOCKNUT, GAS PRODUCER | 2 | |
| 6798925 | CRIMPER- LOCK NUT | 2 | |
| 6798926 | CRIMPER - LOCKNUT | 1 | |
| 6798927 | CRIMPER LOCKNUT COMPRESSOR IMPELLER ASSEMBLY | 2 | |
| 6K001712 | NUT, .1900-32,NON-CRES,SELF-LOCKING | 1 | |
| 703A93-0020-20 | WRENCH, SHUR-LOCK M16 NUT | 1 | |
| 703A93-0020-20/PHP | WRENCH, SHUR-LOCK M16 NUT | 1 | |
| 703A93-0022-00 | M 20 LOCKNUT REPLACEMENT TOOL | 1 | |
| 703A93-0023-00 | SHUR LOCK NUT WRENCH | 1 | |
| 856A1000 | WRENCH INSTALLATION AND REMOVAL NO. 3 BEARING LOCKING NUT | 2 | |
| 856A1000 G04 | Torque Adapter, I/R - No. 3 Brg Locking Nut | 1 | |
| 856A1000 G06 | Torque Adapter, I/R - No. 3 Brg Locking Nut | 1 | |
| 856A1000 G09 | WRENCH, INSTALLATION AND REMOVAL - NO. 3 BEARING LOCKING NUT (WRENCH) | 6 | |
| 856A1000G01 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G02 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G03 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 3 | |
| 856A1000G04 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G05 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G06 | Wrench #3 BRG Locknut | 1 | |
| 856A1000G07 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G08 | Wrench #3 BRG Locknut | 4 | |
| 856A1000G09 | Wrench, Installation and Removal - No. 3 Bearing Locking Nut (wrench) | 6 | |
| 856A1005G02 | WRENCH HPCR LOCK NUT | 10 | |
| 856A1034 | WRENCH, 35 TOOTH BEVEL GEAR LOCKNUT | 1 | |
| 856A1034 G01 | Wrench ‐ 35‐Tooth Bevel Gear Locknut | 11 | |
| 856A1034G01 | Wrench - 35 -Tooth Bevel Gear Locknut (wrench) | 11 | |
| 856A1519 | HEATER - LOCKNUT NO 3 | 1 | |
| 856A1519G04 | Heater, No. 3 Bearing Locking Nut (heater) | 3 | |
| 856A1519G05 | HEATER, LOCKNUT #3 | 2 | |
| 856A1519G06 | HEATER, LOCKNUT #3 | 1 | |
| 856A1606G01 | LOCKNUT NDEGREE 3, HEATER | 5 | |
| 856A1702P01 | LOCKNUT NDEGREE 3, HEATER | 4 | |
| 856A1865G01 | FIXTUE. TORQUE - NO. 3 BEARING LOCK NUT (TORQUE FIXTURE) | 3 | |
| 856A1865G04 | Fixture, Torque - No. 3 Bearing Lock Nut (torque fixture) | 5 | |
| 856A1894 | HEATER, LOCKNUT #3 | 1 | |
| 856A1894 G01 | LOCKNUT N° 3, HEATER - HPC FRONT SHAFT | 5 | |
| 856A1894G01 | LOCKNUT NO. 3, HEATER - HPC FRONT SHAFT | 5 | |
| 856A2798 | FIXT LOCK AGB 31/71 TEETH GEARSHAFT BALL BRG NUT | 1 | |
| 856A2798G01 | FIXT LOCK AGB 31/71 TEETH GEARSHAFT BALL BRG NUT | 5 | |
| 856A3322 | TOOL CRIMP #5 BRG NUT LOCK PIN | 1 | |
| 856A3322G03 | TOOL CRIMP #5 BRG NUT LOCK PIN | 8 | |
| 856A3466 | ADPT ANTI TORQUE STALOCK NUT TGB | 1 | |
| 856A3466G01 | ADPT ANTI TORQUE STALOCK NUT TGB | 6 | |
| 856A3555 | WRENCH STALOCK NUT INPUT | 1 | |
| 856A3555 P01 | Socket Stalock Nut ‐ Bevel Gearshaft Ball Bearing | 4 | |
| 856A3555G01 | SOCKET, STALOCK NUT - HORIZ & INPUT BEVEL GEARSHAFT BALL BRG | 1 | |
| 856A3555P01 | Socket Stalock Nut - Bevel Gearshaft Ball Bearing | 4 | |
| 856A4065G01 | FIXTURE, THREAD REPAIR -NO. 3 BEARING LOCKNUT | 1 | |
| 856AI034 | WRENCH, 35-TOOTH BEVEL GEAR LOCKMNUT | 1 | |
| 877096 | MLG SOCKET R/I LOCK NUT (EMB 175) | 1 | |
| 8C2550 | ADAPTER, TORQUE - NO. 2 OUTER LOCKNUT | 1 | |
| 8C3538 | ADAPTER - WRENCH - TGBX - LOCKNUT - HORIZONTAL | 1 | |
| 8G6522G00133 | TGB INPUT/OUTPUT SEALS & LOCKNUT REPLACEMENT TOOL KIT | 1 | |
| 90-PD6001-PD3 | Bowers Adjustment Cap Lock Nut for PD-6001 | 1 | |
| 90715A038 | SELF-LOCKING NUT | 1 | |
| 9114M50P06 | DOUBLE HEX SELF LOCKING NUT | 1 | |
| 91831A030 | LOCK NUT 5/16-18 ST ST18-8 1/2WTH 23/64H | 1 | |
| 9380M76P04 | NUT SELF LOCKING USED ON MOUNT ASSEMBLY LOWER AFT | 1 | |
| 94-104 | Nylock Stiffnut 5/16 | 3 | |
| 9560151140 | NUT,SELF-LOCKING | 1 | |
| 9560156070 | NUT,SELF-LOCKING | 1 | |
| 95615A160 | NUT, HEX, SELF-LOCKING 0.3125-18 UNC | 1 | |
| 95615A220 | NUT, HEX, SELF-LOCKING 0.500-20 UNF | 1 | |
| 956A1506 | COVER - SEAL - NUT LOCKING NUMBER 3 BEARINGS | 1 | |
| 956A1511 | FIXTURE - TORQUE - LOCKNUT - 3B BEARING | 1 | |
| 956A1523 | FIXTURE - TORQUE - LOCKNUT - RADIAL BEVEL GEAR | 1 | |
| 956A1527 | FIXTURE - ASSEMBLY - LOCKNUT - IGB | 1 | |
| 956A1536 | FIXTURE - REMOVE - RETAINING PINS - HPC LOCKNUT | 1 | |
| 956A3501 | HEATER-NO.3 LOCKNUT | 1 | |
| 956A3531 | FIXTURE - TORQUE - LOCKNUT - 3B BRG | 1 | |
| 956A3542 | FIXTURE - ASSEMBLY - LOCKNUT - IGB | 1 | |
| 956A3557 | PROTECTOR - LOCK NUT SEAL | 1 | |
| 956A6484 | DUMMY - LOCKING NUT - LPT BEARING -ROLLER 5 | 1 | |
| 956A6541 | FIXTURE - TORQUING - LOCKING NUT BEARING 5 | 1 | |
| 956A7644P56 | R/H ADAPTER LOCK NUT | 1 | |
| 9610M50 | NUT - SELF-LOCKING | 1 | |
| 96345A280 | LOCK NUT | 1 | |
| 98D52307515000 | SAFETY LOCK NUT | 34 | |
| 98F34103001201 | LOCKNUT DIA 40 X 20 | 1 | |
| 98L24209004212 | NUT SELF-LOCKING | 1 | |
| 98L34001000226 | LOCK NUT | 1 | |
| 9C1899 | TOOL SET/LOCK NUT TIGHTENING | 1 | |
| 9C1900 | TOOL SET/ LOCK NUT TIGHTENING | 1 | |
| 9C2264G02 | LOCKING WRENCH - HPCR RING TUBE SPTR NUT | 1 | |
| 9C2326 | LOCKNUT, TOOL SET | 1 | |
| A1-300.04 - x2 (WINGS) - 120t A1-1200.01 - x1 (NOSE) - 30t | HYDRO tripod jack set wide body with control stand A300/A310 /A330/A340 with Automatic Safety Nut Lock Manufacturer: LFT Lukassen (now Hydro)- MFD:1990 | 1 | |
| A20001-108 | Lock Nut | 1 | |
| A20001-115 | Lock Nut | 1 | |
| A21010-77 | Self Locking Nut | 1 | |
| A21010-78 | Self Locking Nut | 1 | |
| A26001-233 | Locknut | 1 | |
| A26001-234 | Locknut | 1 | |
| A27088-23 | Lock Nut | 1 | |
| A27108-16 | INBD LOCK, NUT END | 1 | |
| A27108-18 | OUTBD LOCK, NUT END | 1 | |
| A32005-63 | Self - Locking Nut | 1 | |
| A32027-104 | Lock Nut | 1 | |
| A32027-106 | Lock Nut | 1 | |
| A32027-135 | Lock Nut | 1 | |
| A32045-111 | WRENCHES - SPANNER - NLG STEERING TRUNNION LOCKNUT | 8 | |
| A32045-20 | WRENCH LOCK RELEASE ACTUATOR NUT | 1 | |
| A32045-23 | WRENCH INTERLOCK RELEASE ACTUATOR NUT | 1 | |
| A32045-38 | WRENCH WRENCH NLG ACTUATOR LOCKNUT | 4 | |
| A49001-108 | Lock Nut | 1 | |
| A673853 | LOOSEN AND TIGHTEN THE LOCKNUT | 1 | |
| AGE 00076-003 | WRENCH - TORQUE, LOCK NUT | 3 | |
| AGE-00076-003 | WRENCH - TORQUE, LOCK NUT | 3 | |
| AGE-00076-005 | WRENCH - TORQUE, LOCK NUT | 1 | |
| AGE‐00076‐003 | TORQUE‐WRENCH, STAB. JOINT LOCK NUT | 3 | |
| AGSE-S00153-12CA01 | NUT. LOCKING | 1 | |
| AM-2811-4833 | LOCK NUT 3/4-10 WITH NYLON INS | 1 | |
| AN364-428 | LOCK NUT, | 1 | |
| AN4-7 | NUT, LOCKING | 1 | |
| AN6289D6 | NUT, LOCK TUBE | 1 | |
| ANS1929A | LOCKNUT WRENCH | 1 | |
| ANS1930 | LOCKNUT WR | 1 | |
| ANS1932A | LOCKNUT WR | 1 | |
| AS20625 | NUT SELF LOCKING | 1 | |
| AS20626+++ | NUT,SELF-LOCKING | 1 | |
| AS27307+++ | SELF LOCKING NUT | 1 | |
| AS27308+++ | SELF LOCKING NUT | 1 | |
| AS27310+++ | SELF LOCKING NUT | 1 | |
| AS27312+++ | SELF LOCKING NUT | 1 | |
| AS27318+++ | SELF LOCKING NUT | 1 | |
| AS27322+++ | SELF LOCKING NUT | 1 | |
| AS27822+++ | SELF LOCKING NUT | 1 | |
| AS27824 | NUT SELF-LOCKING | 1 | |
| AS42441+++ | SELF-LOCKING NUT | 1 | |
| AS42443+++ | SELF-LOCKING NUT | 1 | |
| AS42445+++ | SELF-LOCKING NUT | 1 | |
| AS42451+++ | SELF-LOCKING NUT | 1 | |
| AS42455+++ | SELF-LOCKING NUT | 1 | |
| AS64355 | SELF LOCKING NUT | 1 | |
| ASNA0045-050CC | SELF LOCKING NUT I/C 192869170 REFERENCE: SAFRAN SB 418-22-091 | 1 | |
| AT1070RA1 | LOCK NUT | 1 | |
| AT1300B-16 | LOCK NUT | 1 | |
| AT184-13A | LOCKNUT | 1 | |
| AT204A-11 | LOCK NUT | 1 | |
| AT238-29 | LOCK NUT | 1 | |
| AT450-45H | LOCK NUT | 1 | |
| AT450DP-47 | LOCKNUT | 1 | |
| AT465-17HMP2 | LOCK NUT | 1 | |
| AT55722 | WRENCH-LOCKNUT | 1 | |
| AT738-17 | LOCK NUT | 1 | |
| ATI429IR-8 | LOCKNUT-3/8-24 NYLOK HXNUT ZNC | 1 | |
| ATI501A-8 | LOCK NUT - HAND RIVET SQUEEZER | 1 | |
| ATS2987-9 | NYL LOCK NUT | 1 | |
| B42113-1 | LOCK NUT STEM | 1 | |
| B78008-17 | SPANNER WRENCH - NUT, CYLINDER LOCKING ACTUATOR (B78008-17 INCLUDED IN B78008-19) | 6 | |
| C24002-18 | SS HEX LOCK NUT | 1 | |
| C32020-10 | LOCKNUT | 1 | |
| C47940 | C47940 EXTRACTOR LOCKWASHER OF THE SCISSORS MIDDLE PIN NUT | 7 | |
| C54017-104 | Lock nut | 1 | |
| C71003-211 | Self Locking Nut | 1 | |
| C71020-122 | LOCK NUT U/O -128 & -112 | 2 | |
| C71020-125 | LOCK NUT U/O -106 & -107 | 1 | |
| C71020-132 | LOCK NUT U/O -126 | 1 | |
| C78021-9 | SELF-LOCKING NUT | 1 | |
| CAT5643-3B | WRENCH, SPECIAL REMOVAL TOOL LOCKNUT | 3 | |
| CDI250010017 | LOCK KNOB NUT | 1 | |
| CH723-259 | BRACKET-LOCKING THS HYDROMECH ACTU.NUT | 2 | |
| CH723259 | BRACKET-LOCKING THS HYDROMECH ACTU.NUT | 2 | |
| CJ250-7 | LOCK NUT ADJ CJ250 | 1 | |
| CLL-5012 | JACK 50T WITH LOCK NUT - ENGINE SHORE | 1 | |
| CTR2512-35 | LOCK NUT ASSY | 1 | |
| D2887-148B/F | LOCK NUT | 1 | |
| DPTSECR0113_B | LOCK NUT PART OF D71STA00005G02 (ENGINE CRADLE & BASE) | 1 | |
| DRT68840-3 | LOCK NUT | 1 | |
| DRT69444 | SPANNER, UPLOCK ROLLER NUT | 1 | |
| DZZ7148-1 | N/L/G UNLOCK CYL NUT T/Q ADAPTER | 1 | |
| EMB-01114-001 | MLG MAIN LOCKING ROD NUT REMOVAL/INSTALLATION WRENCH (GSE 129) | 1 | |
| EMB-01115-001 | SOCKET: NLG LOCKING ROD NUT REMOVAL/INSTALLATION | 1 | |
| F22NG5-02J16 | GANG CHANNEL NUT -SELF LOCKING, LENGTH 72" | 1 | |
| F22NG5-02J6 | GANG CHANNEL NUT SELF LOCKING,LENGTH 72" | 1 | |
| F70256 | WRENCH ADAPTER -0 LOCKNUT, ACTUATOR USED TO | 1 | |
| F70284-5 | NUT-SELF LOCKING | 1 | |
| F70312-28 | WRENCH - CROWFOOT, LOCK LINK APEX NUT | 4 | |
| F72803-1 | Wrench-flap xmsn torque limiter，lock nut | 2 | |
| F80207-47 | LOCK NUT | 1 | |
| FAR2500-35 | LOCK NUT | 1 | |
| FAT03-35- | WRENCH PGB STRUT TURNBUCKLE LOCKNUT | 1 | |
| FAT03-35-51000 | WRENCH PGB STRUT TURNBUCKLE LOCKNUT | 1 | |
| FSNKW10CNNEG | NUT M10 1.5 NYLON LOCK | 1 | |
| FSNKWM12CNNE | NUT M12 1.75 NYLON LOCK | 1 | |
| FSNKWM6CNNEG | NUT M6 1.0 NYLON LOCK | 1 | |
| FSNKWM8CNNEG | NUT M8 1.25 NYLON LOCK | 1 | |
| G-30 | Cherry Aerospace G-30 CherryLock A Code Nut-Plate Hand Riveter | 2 | |
| G32028-164 | JACK WLG BLG GLAND NUT LOCK TABS | 4 | |
| G32028-82 | LOCK NUT | 2 | |
| G32032-51 | Locknut | 1 | |
| G38006-6 | LOCKNUT | 1 | |
| G49002-111 | Lock nut | 1 | |
| G71028-20 | Lock Nut | 1 | |
| GS19820-1 | ADAPTER PITCHLOCK NUT | 2 | |
| GSE 057 | WRENCH - TORQUE, LOCK NUT | 1 | |
| GSE378 | SOCKET - REMOVAL/INSTALLATION LOCK NUT | 1 | |
| H-2259 | LOCKNUT | 2 | |
| H10-3 | Kaylock Nut | 13 | |
| H10-4 | NUT SELF LOCKING | 12 | |
| H10-6 | NUT SELF LOCKING | 7 | |
| H103 | Kaylock Nut | 13 | |
| H2259 | NUT: LOCK | 2 | |
| H2334 | NUT: LOCK, | 2 | |
| H29164-5 | EXTENDED WASHER SELF-LOCKING NUT | 1 | |
| HU27629/1 | LOCKING PUNCH, LOCKPLATE TO NUT | 1 | |
| HU37526-1 | IMMOBILISER-TORQUE TIGHTEN LP TURBINE LOCKING NUT | 5 | |
| HU37581-2 | PLATE - ANCHOR, LP TURBINE, LOCKING NUT | 1 | |
| HU37582-1 | IMMOBILIZER - LP TURBINE, LOCKING NUT | 1 | |
| HU37582-2 | IMMOBILIZER-LP TURBINE, LOCKING NUT | 1 | |
| HU37583-2 | SPANNER - LP TURBINE, LOCKING NUT | 1 | |
| HU38390-3 | PRESS-LOCKNUT CUPWASHER, DEDICATED ALTERNATOR | 7 | |
| HU39015 | LOCKNUT ASSEMBLY | 1 | |
| HU39016 | LOCKNUT ASSEMBLY | 1 | |
| HU41546-1 | IMMOBILISER-TORQUE TIGHT LP TURBINE LOCKING NUT | 1 | |
| HU43331 | PRESS-LOCKNUT CUPWASHER, DEDICATED ALTERNATOR | 2 | |
| HU85008 | WRENCH - LOCKNUT, DRIVE GEAR HOUSING | 6 | |
| HU85509 | WRENCH - VESPEL LOCKNUT, GEARBOX DRIVE GEAR | 4 | |
| IAE 3P16434 | FLARING FIXTURE (SELF-LOCKING CLINCH NUT IS 0.250-28 THREAD AND IS FLARED TO 30 DEGREES CONICAL ANGLE) | 1 | |
| IAE1P16567 | FLARING FIXTURE (SELF-LOCKING CLINCH NUT IS 0.250-28 THREAD AND IS FLARED TO 30 DEGREES CONICAL ANGLE) | 3 | |
| IAE3R19184 | LOCKNUT | 1 | |
| IAE3R19185 | LOCK NUT | 1 | |
| IAE3R19186 | LOCKNUT | 1 | |
| J1092P04 | PL21 RAKE 1/4-28, 12 POINT LOCKNUT | 1 | |
| J201P01 | NUT SELF LOCKING FOR FAN FRAME INSTL-BEARING | 1 | |
| J21843 | SUPPORT BLOCK RETAINING NUT | 1 | |
| J27002-1 | LOCK, HORIZONTAL STABILIZER ACTUATOR BALL NUT | 12 | |
| J27002-14 | Ball nut lock-actuator，horizontal stabilizer | 2 | |
| J27002-2 | Ball nut lock assy | 1 | |
| J270021 | LOCK - HORIZONTAL STAB ACT BALL NUT | 12 | |
| J49003-29 | Locknut | 1 | |
| J626P03 | NUT - SELF-LOCKING | 1 | |
| J71003-159 | Lock Nut | 1 | |
| J78023-80 | SELF LOCKING HEX NUT | 1 | |
| K27016 | LOCK HORIZONTAL STABILIZER ACTUATOR BALL NUT | 1 | |
| K27016-1 | LOCK - HORIZONTAL STABILIZER ACTUATOR BALL NUT | 9 | |
| K27016-1 | LOCK-HORIZONTAL STABILIZERACTUATOR BALL NUT | 9 | |
| K27016-2 | LOCK-HORIZONTAL STABILIZER ACTUATOR BALL NUT | 1 | |
| K27016-4 | LOCK-HORIZONTAL STABILIZER ACTUATOR BALL NUT | 1 | |
| K32018-48 | Thumb Lock Nut | 1 | |
| K3236 | KIT: HANDWHEEL LOCKNUT, | 2 | |
| K52002-140 | Lock Nut | 1 | |
| KLED3338 | CONDUIT LOCKNUT PLIERS | 1 | |
| KM26 | LOCK NUT M130 X 2 | 1 | |
| L10839-6-3 | SELF-LOCKING NUT (NSN 525-624- 9703) | 1 | |
| LHL9546-6-4 | SELF-LOCKING NUT (NSN 525-624- 9109) | 1 | |
| LN#10-24-SS2B18-8 | LOCK NUT #10-24 STAINLES STEEL | 1 | |
| LN#10-32-SZ2BGR2 | LOCK NUT #10-32 STEEL ZINC 2B GRADE 2 | 1 | |
| LN#4-40 | NUT SELF LOCKING | 1 | |
| LN#4-40-SZ2BGR2 | LOCK NUT #4-40 STEEL ZINC 2B GRADE 2 | 1 | |
| LN#4-40-SZ3BGR2 | LOCKNUT #4-40 STEEL ZINC 3B GRADE 2 | 1 | |
| LN#6-32-SS3B18-8 | LOCK NUT #6-32 STAINLESS 18-8 | 1 | |
| LN#6-32-SZ2BGR2 | LOCK NUT #6-32 STEEL ZINC GRADE 2 | 1 | |
| LN#8-32-SZ2BGR2 | LOCK NUT #8-32 STEEL ZINC GRADE 2 | 1 | |
| LN1"1/2-12-SZ2BGR8 | LOCK NUT 1"1/2-12 STEEL ZINC 2B | 1 | |
| LN1-8-SZ3BGR8 | LOCK NUT 1-8 STEEL ZINC 3B GRADE 8 | 1 | |
| LN1/2-13-SS2B | LOCK NUT 1/2-13 STAINLESS STEEL | 1 | |
| LN1/2-13-SZ2BGR5 | LOCK NUT 1/2-13 STEEL ZINC GRADE 5 | 1 | |
| LN1/2-13-SZ2BGR8 | LOCK NUT 1/2-13 STEEL ZINC GR8 | 1 | |
| LN1/2-20-SZ2BGR8 | LOCKNUT 1/2-20 STEEL ZINC GR8 | 1 | |
| LN1/2-20SS | LOCK NUT 1/2-20 UNF STAINLESS STEEL | 1 | |
| LN1/4-20-N | LOCK NUT 1/4-20 NYLON | 1 | |
| LN1/4-20-SS2B18-8 | LOCK NUT 1/4-20 STAINLESS STEEL 18-8 LOW PROFILE JAM NUT | 1 | |
| LN1/4-20-SZ2BGR5 | LOCK NUT 1/4-20 STEEL ZINC GRADE 5 | 1 | |
| LN1/4-20-SZ2BGR8 | LOCK NUT 1/4-20 ZINC PL GR8 | 1 | |
| LN1/4-20-SZ3BGR8 | LOCK NUT 1/4-20 STEEL ZINC 3B GRADE 8 | 1 | |
| LN1/4-20-SZTHIN | LOCK NUT 1/4-20 STEEL ZINC THIN HEIGHT | 1 | |
| LN1/4-20SS | LOCK NUT 1/4-20 S. STL. | 1 | |
| LN1/4-28-SZ2BGR5 | LOCK NUT 1/4-28 STEEL ZINC GRADE 5 | 1 | |
| LN2-12-SZ2AGR5 | LOCK NUT2-12UNF-ST ZN PL GR5 | 1 | |
| LN3/4-10-SZ2BGR8 | LOCK NUT 3/4-10 STEEL ZINC GRADE 8 | 1 | |
| LN3/4-16 | LOCK NUT 3/4-16 | 1 | |
| LN3/4-16-SZ2BGR8 | LOCKNUT 3/4-16 STEEL ZINC 2B GRADE 8 | 1 | |
| LN3/8-16 | LOCK NUT 3/8-16 ZINC | 1 | |
| LN3/8-16-SS3B316 | LOCK NUT 3/8-16 STAINLESS STEEL 316 | 1 | |
| LN3/8-16-SZ2BGR2 | LOCK NUT 3/8-16 STEEL ZINC | 1 | |
| LN3/8-16-SZ2BGR8 | LOCK NUT | 1 | |
| LN3/8-24-SZ2BGR5 | LOCK NUT 3/8-24STEEL ZINC GRADE 5 | 1 | |
| LN3/8-24-SZ2BGR8 | LOCK NUT 3/8-24 STEEL ZINC GRADE 8 | 1 | |
| LN30 | LOCK NUT 30MM | 1 | |
| LN5/16-18-SS2B316 | LOCK NUT 5/16-18 STAINLESS STEEL 316 | 1 | |
| LN5/16-18-SS3B316 | LOCK NUT 5/16-18 STAINLESS STEEL 316 3B | 1 | |
| LN5/16-18-SZ2BGR2 | LOCK NUT 5/16-18 STEEL ZINC GRADE 2 | 1 | |
| LN5/16-24-SS2B18-8 | LOCK NUT 5/16-24 STAINLESS STEEL 18-8 | 1 | |
| LN5/16-24-SZ2BGR8 | LOCKNUT 5/16-24 STEEL ZINC | 1 | |
| LN5/8-11-SZ2BGR5 | LOCK NUT 5/8-11 STEEL ZINC GRADE 5 | 1 | |
| LN5/8-18-SZ2BGR8 | LOCK NUT 5/8-18 STEEL ZINC GRADE 8 | 1 | |
| LN6/32 | LOCK NUT 6/32 | 1 | |
| LN7/16-20 SZGR8 | LOCK NUT 7/16-20 ZINC PL GR8 | 1 | |
| LN7/16-20-SZ2BGR8 | LOCKNUT 7/16-20 STEEL ZINC GRADE 8 | 1 | |
| LN7/16-20SS | LOCK NUT 7/16-20 UNF STAINLESS STEEL | 1 | |
| LN9/16-18-SZ2BGR2 | LOCK NUT 9/16-18 STEEL ZINC GRADE 2 | 1 | |
| LN9/16-18-SZ2BGR8 | LOCK NUT 9/16-18 STEEL ZINC 2B GRADE 8 | 1 | |
| LNM10X1.5-SZ6HCL10 | LOCK NUT M10X1.5 STEEL ZINC CLASS 10 | 1 | |
| LNM10X1.5-SZ6HCL5 | LOCK NUT M10X1.5 STEEL ZINC CLASSE 5 | 1 | |
| LNM12X1.75-SZ6HCL5 | LOCK NUT M12X1.75 STEEL ZINC CLASSE 5 | 1 | |
| LNM12X1.75-SZ6HCL8 | LOCK NUT M12X1.75 STEEL ZINC CLASS 8 | 1 | |
| LNM16X2-SZ6HCL5DIN985 | LOCK NUT M16 STEEL ZINC | 1 | |
| LNM16X2-SZ6HCL8 | LOCK NUT M16X2 STEEL ZINC 6H CLASS 8 | 1 | |
| LNM20X2.5-SZ6HCL8 | LOCK NUT M20X2.5 STEEL ZINC CLASS 8.8 | 1 | |
| LNM36X4-SZ6HCL5 | LOCK NUT M36X4 STEEL ZINC CLASSE 5 | 1 | |
| LNM36X4-SZ6HCL8 | LOCK NUT M36 X 4 STEEL ZINC 6H CLASS 8.8 | 1 | |
| LNM3X0.5-SS | LOCK NUT M3X0.5 STAINLESS STEEL | 1 | |
| LNM4X0.7-SS | LOCK NUT M4X0.7 STAINLESS STEEL | 1 | |
| LNM4X0.7-SZ6HCL5 | LOCK NUT M4X0.7 STEEL ZINC CLASSE 5 | 1 | |
| LNM5X0.8-SZ6HCL8 | LOCK NUT M5X0.8 STEEL ZINC 6H CLASS 8 | 1 | |
| LNM6X1-SS6HA2 | LOCK NUT M6X1 STAINLESS STEEL A2 | 1 | |
| LNM6X1-SZ6HCL10 | LOCK NUT M6X1 STEEL ZINC CLASSE 10 | 1 | |
| LNM6X1-SZ6HCL8 | LOCK NUT M6X1 STEEL ZINC CLASS 8.8 | 1 | |
| LNM8X1.25-SZ6HCL8 | LOCK NUT M8X1.25 STEEL ZINC PL CL8 | 1 | |
| LOCK NUT TURBINE N2 TIGHT WRENCH | LOCK NUT TURBINE N2 TIGHT WRENCH | 1 | |
| LOCKRINGNUT714A | LOCK RING NUT FOR JACK 714A | 1 | |
| LST56156 | 2 .0001 GRAD CRBD FCS LOCK NUT | 1 | |
| LST63492 | 4 .0001 GRD CRBD FCS LOCK NUT | 1 | |
| LST63493 | 5 .0001 GRD CRBD FCS LOCK NUT | 1 | |
| LST63494 | 6 .0001 GRD CRBD FCS LOCK NUT | 1 | |
| LST66430 | 1 .001 GRAD LOCK NUT CARBD SPN | 1 | |
| LST67994 | 0-1".001GRADRACHETSTOPLOCKNUT | 1 | |
| LST67997 | 0-1.0001GRADRATCHETSTOPLOCKNUT | 1 | |
| LST68003 | .001"GRADRATCHETSTOPLOCKNUTCA | 1 | |
| M0NT23374 | TOOL FOR LOCKING OF NUTS | 1 | |
| M10 | HEX SELF LOCKING NUT | 4 | |
| MAR95847 | CASE LOCK NUT | 1 | |
| MAR95870 | AIR PISTON LOCK NUT | 1 | |
| MAR95972 | FRAME LOCK NUT | 1 | |
| ME4E33 | 5/8-11 JAMB LOCKNUT | 1 | |
| ME65B80713-1 | LOCK - BALLNUT, HORIZONTAL STABILIZER ACTUATOR | 8 | |
| MS17825-6 | NUT,SELF-LOCKING,SLO | 1 | |
| MS17825-7 | NUT SELF-LOCKING S | 1 | |
| MS21042L06 | NUT SELF LOCKING | 1 | |
| MS21042L08 | NUT, SELF LOCKING | 1 | |
| MS21044-N7 | Nylock Stiffnut 7/16 | 11 | |
| MS21044C4 | LOCKNUT 1/4-20 STAINLESS STEEL 18-8 | 1 | |
| MS21044C6 | NUT, SELF-LOCKING | 2 | |
| MS21044C7 | LOCK NUT | 1 | |
| MS21044C8 | LOCK-NUT | 1 | |
| MS21044N04 | LOCK NUT #4-40 STEEL ZINC 3B GRADE 2 | 1 | |
| MS21044N08 | LOCK NUT | 1 | |
| MS21044N10 | LOCK NUT | 1 | |
| MS21044N12 | LOCK NUT 3/4-16 STEEL ZINC GRADE 3B | 1 | |
| MS21044N14 | NUT SELF-LOCKING | 1 | |
| MS21044N3 | LOCK NUT #10-32 STEEL CADMIUM 3B | 1 | |
| MS21044N4 | LOCKNUT 1/4-28 STEEL ZINC 3B GRADE 8 | 1 | |
| MS21044N5 | SELF-LOCK NUT HEX | 1 | |
| MS21044N7 | STEEL NYLOCK NUT | 11 | |
| MS21045-5 | NUT, SELF LOCKING | 1 | |
| MS21046C6 | SELF-LOCKING NUT | 1 | |
| MS21083-NO4 | LOCKNUT | 1 | |
| MS21083-NO6 | LOCK NUT | 1 | |
| MS21083N6 | LOCKNUT | 1 | |
| NAS1021-C6 | SELF-LOCKING NUT | 1 | |
| NAS1021-N4 | LOCK NUT | 1 | |
| NAS1021C8 | LOCK NUT | 1 | |
| NAS1021N8 | NUT,SELF LOCKING 1/2-20 | 1 | |
| NAS1026N6 | LOCK NUT | 1 | |
| NAS1291C4M | NUT LOCKING | 1 | |
| NAS1726C3SE | NUT SELF-LOCK SHEA | 1 | |
| NAS1791C3-1 | LOCKING NUTPLATE SELF | 1 | |
| NAS509-5 | LOCKING HEXAGON NUT SELF | 1 | |
| NAS577B6A | NUT SELF LOCKING B | 1 | |
| NAS679-A4 | SELF LOCKING NUT | 1 | |
| NAS679A3 | NUT ,SELF-LOCKING | 1 | |
| NAS679A3W | NUT SELF-LOCKING LOW HEIGHT #10-32 UNF | 1 | |
| NAS679A4W | NUT SELF LOCKING | 1 | |
| NDL1410 | LOCKING NUT DRIVER 1/4INx10IN | 1 | |
| NDL51610 | LOCKING NUT DRIVER 5/16INx10IN | 1 | |
| NDLM610 | LOCKING NUT DRIVER 6MMx10IN | 1 | |
| NDLM710 | LOCKING NUT DRIVER 7MMx10IN | 1 | |
| NTA11354-3CM | SELF-LOCKING NUT | 1 | |
| OTC | OTC 1922 - WHEEL BEARING LOCKNUT SOCKET | 1 | |
| OTC 1921 | 2 1/2 INCH 6PT TRUCK WHEEL BEARING LOCKNUT SOCKET | 1 | |
| OTC 1922 2-5/8 | OTC 1922 Wheel Bearing Locknut Socket - 6 Point, 2-5/8" Opening Size | 1 | |
| OTC1922 2-5/8 | Wheel Bearing Locknut Socket - 6 Point, 2-5/8" Opening Size | 1 | |
| OTC1981 | LOCKNUT SOCKET | 1 | |
| OTC6006 | DODGE LOCK NUT SOCKET | 1 | |
| OU43066 | GLAND NUT LOCK ASSY_[OU43066] | 1 | |
| P-1922 | NOSE WHEEL LOCKNUT SOCKET | 8 | |
| PDL 1254J | HERCULES C-130 UT CALIBRATION STANDARD FIGURE 21 SHEETS 1-4 20-40-00. FASTENER (HLT116 HI-LOCK FASTENERS WITH SELF LOCKING NUTS). Includes Test Report Traceable to NIST and Certificate of Conformance. | 2 | |
| PWA25216 | WRENCH - AGB T/SFT SPUR GEAR LOCK NUT_[PWA25216] | 2 | |
| PWA25224 | WRENCH - AGB IDLER SPUR GEAR LOCK NUT_[PWA25224] | 2 | |
| PWA25225 | WRENCH - AGB IDLER SFT LOCK NUT LOOSE_[PWA25225] | 2 | |
| PWA25289 | WRENCH - MGB F/P G/SFT LOCK NUT LOOSE_[PWA25289] | 2 | |
| PWA25338 | WRENCH - MGB SCAV IDLER G/LOCK NUT_[PWA25338] | 2 | |
| PWA26233 | CRIMPER - HPC, TIEROD NUT TABLOCK 15TH_[PWA26233] | 2 | |
| PWA27512 | PULLER - #3 BRG INNER RACE NUT LOCK_[PWA27512] | 2 | |
| PWA29546 | WRENCH-DEAERATOR IMPELLER LOCK RETAINER NUT | 2 | |
| PWC30046-57 | NUT SELF-LOCKING | 9 | |
| PWC30458 | NUT SELF LOCKING | 10 | |
| PWC31238 | LOCKING TOOL, LPC LOCKING NUT CUPWASHER (POST-SB7135) | 1 | |
| PWC31517 | DRILLING FIXTURE, HP TURBINE SHAFT LOCKING NUT | 1 | |
| PWC40770 | Socket Nut, Self-Lock | 4 | |
| PWC52366 | CRIMPER, FAN LOCKING NUT CUPWASHER (POST-SB7436) | 1 | |
| PWC64211 | NUT HEX, SELF-LOCKING, REGULSV HEIGHT, 4 | 5 | |
| PWC90277 | SELF LOCKING NUT | 1 | |
| Q47244 | WRENCH FOR ADJUSTABLE END FITTING LOCK NUT OF RETRACTION STRUT (MLG) | 1 | |
| RACL10010 | ALUMINUM LOCK NUT HYDRAULIC CYLINDER | 1 | |
| RACL202 | LOCK NUT CYLINDER | 1 | |
| RB T101465 | Pillow Block Shaft Nut Wrench | 1 | |
| RB T103221 | Pillow Block Nut Wrench | 1 | |
| RB0006-809-00650 | Barrel Wrench, Sherlock Nut | 1 | |
| RB23003262 | Locknut Crimper | 2 | |
| RB6798046 | Wrench-Bearing Locknut, Gas Producer | 2 | |
| RB6798925 | Gas Producer 2Nd Stage Wheel Locknut Crimper | 1 | |
| RB6798926 | Gas Producer 1St Stage Wheel Locknut Crimper | 1 | |
| RB6798927 | CRIMPER LOCKNUT COMPRESSOR IMPELLER ASSEMBLY | 3 | |
| RBE332A93-3226-22 | Shurlock Nut Spanner "Pinion 23000T" | 2 | |
| RBE332A93-3229-00 | Extractor, Lock Nut | 2 | |
| RBE332A93-3237-00 | Removal And Installation Lock Nut Tool | 2 | |
| RBE332A93-3501- 00 | 1GB TGB FLANGER LOCKNUT | 2 | |
| RBE332A93-3501- 00P | IGB TAIL ROTOR GEAR BOX FLANGER LOCKNUT | 1 | |
| RBE332A93-3501- 00p | IGB TAIL ROTOR GEAR BOX FLANGER LOCKNUT | 1 | |
| RBE332A93-3501-00 | LGB Tail Rotor Gear Box Flanger Locknut | 2 | |
| RBE5102867201.2 | Locknut Tool | 1 | |
| RBEM632V3004103 | FAN FLANGE LOCK NUT EXCHANGE | 2 | |
| RBT18510-59 | Main Rotor Pillow Block Nut Wrench | 1 | |
| RBW0905G12631-3G-29 | Pivot Lock Bolt Nut | 1 | |
| RBW109-3101-22-1 | Wrench, Locking Counter Nut | 2 | |
| RBW6205G08451-3G | IGB TGB FLANGER LOCKNUT | 2 | |
| RBW6205G26551-3G | Main Rotor Scissor Locknut | 2 | |
| RRT054895 | SPENNER- IP LOCKNUT | 1 | |
| S1914-11 | NUT, SELF-LOCKING CAP | 1 | |
| SD12575-1 | WRENCH,LOCKNUT | 1 | |
| SL90-314-5625 | LOCKNUT | 25 | |
| SL90-315-.3750 | Wrench, Brg. Locknut | 18 | |
| SL90-315-.4375 | WRENCH, BRG. LOCKNUT | 12 | |
| SL90-315-.5000 | Wrench, Brg. Locknut | 10 | |
| SL90-315-.5625 | Wrench, Brg. Locknut | 15 | |
| SL90-315-.6250 | Wrench, Brg. Locknut | 12 | |
| SL90-315-.7500 | Wrench, Brg. Locknut | 15 | |
| SL90-315-.8750 | WRENCH, BRG. LOCKNUT | 4 | |
| SL90-315-1.0000 | WRENCH, BRG. LOCKNUT | 6 | |
| SL90-315-1.2500 | WRENCH, BRG. LOCKNUT | 5 | |
| SL90-315-1.5625 | WRENCH, BRG. LOCKNUT | 2 | |
| SL90-315-3750 | WRENCH, BRG. LOCKNUT | 18 | |
| SL90-315-4375 | WRENCH, BRG. LOCKNUT | 12 | |
| SL90-315-5000 | WRENCH, BRG. LOCKNUT | 10 | |
| SL90-315-5625 | WRENCH, BRG. LOCKNUT | 15 | |
| SL90-315-6250 | WRENCH, BRG. LOCKNUT | 12 | |
| SL90-315-7500 | WRENCH, BRG. LOCKNUT | 15 | |
| SL90-322-.5625 | Wrench, Brg. Locknut | 23 | |
| SL90-322-5625 | WRENCH, BRG. LOCKNUT | 23 | |
| SL90-350-7500 | STA-LOK NUTS AND LOCK WASHERS | 21 | |
| SL90-374-.3750 | Wrench, Brg. Locknut | 9 | |
| SL90-374-.4375 | Wrench, Brg. Locknut | 9 | |
| SL90-374-.6250 | Wrench, Brg. Locknut | 15 | |
| SL90-374-3750 | WRENCHLOCKNUT | 9 | |
| SL90-374-4375 | WRENCH, BRG. LOCKNUT | 9 | |
| SL90-374-5000 | WRENCHLOCKNUT | 8 | |
| SL90-374-7500 | WRENCH LOCK NUT | 15 | |
| SP510165 | LOCK NUT | 1 | |
| SP67644 | LOCK NUT | 1 | |
| SPL-1693 | LOCK EQUIPMENT, HORIZONTAL STABILIZER ACTUATOR BALL NUT | 1 | |
| SRS603-3 | SPANNER K LOCK BLUE NUT NSA5182-3 | 1 | |
| ST95469 | Bearing Locknut Removal Tool | 1 | |
| STD-2045 | NUT, SELF LOCKING | 1 | |
| SWE 192073 | NO.3 BRG NUT LOCK | 1 | |
| SWE 19407 | #3 BRG LOCK NUT | 2 | |
| SWE 28783 | #3 BRG LOCK NUT | 2 | |
| T-445076 | Wrench Locknut | 1 | |
| T-448407 | Wrench,Locknut | 1 | |
| T-448407PM | WRENCH,LOCKNUT | 1 | |
| T-472501 | Lock-Nut Torque Tool | 1 | |
| T-472501PM | LOCK-NUT TORQUE TOOL | 1 | |
| TB-9205-1D | LOCKNUT | 1 | |
| TB-9205-2D | LOCKNUT | 1 | |
| TB-9205-3B | LOCKNUT | 1 | |
| TR1311 | NUT: LOCK, | 1 | |
| U755355 | NUT SELF-LOCKING | 1 | |
| W19341-45 | REMOVAL TOOL - KAYLOCK NUT (SNAP-OUT) | 3 | |
| W19341−45 | Removal Tool − Kaylock Nut (SNAP−OUT) | 3 | |
| WNXL-SF-1/4 | WEDGE LOCK NUT TYPE | 1 | |
| YA6540 | AXLE LOCK NUT REMOVER KIT | 1 | |
| YA6542 | LOCK NUT RELEASE TOOL | 1 | |
| Z1200-04 | NUT SELF LOCKING HEXAGON | 1 | |
| C47955 | CASTELLATED WRENCH,USED LOCK NUT FITED T | 10 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
