| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| MIT111A4000-62 | NGS TOOL | 1 | |
| MIT340A5006-1 | NGS TOOL | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) HORIZONTAL STAB SLINGS | CALIBRATE AND RE-CERTIFY THIS TOOL (HORIZONTAL STAB SLINGS) IN ACCORDANCE WITH BOEING DWG C55007 REV. D (OR LATER) AND LOLER 1998 (OR LATER). TEST/CALIBRATION CERTIFICATE MUST REFERENCE MAINTENANCE DATA (MANUAL/STANDARD) AND REVISION USED. ADDITIONAL REFE | 1 | |
| 02-5050 | TOOL;TYPE: CUTTING;WIDTH: 12MM;MATERIAL: TUNGSTEN;MAN PART NUMBER: 02-5050;MANUFACTURER: ROEBUCK | 1 | |
| 02-5051 | TOOL;TYPE: CUTTING;WIDTH: 16MM;MATERIAL: TUNGSTEN;MAN PART NUMBER: 02-5051;MANUFACTURER: ROEBUCK | 1 | |
| 02-5061 | TOOL;TYPE: CUTTING;WIDTH: 12MM;MATERIAL: TUNGSTEN;MAN PART NUMBER: 02-5062;MANUFACTURER: ROEBUCK | 1 | |
| 02-5062 | TOOL;TYPE: CUTTING;WIDTH: 12MM;MATERIAL: TUNGSTEN;MAN PART NUMBER: 02-5050;MANUFACTURER: ROEBUCK | 1 | |
| 02-5063 | TOOL;TYPE: CUTTING;WIDTH: 16MM;MATERIAL: TUNGSTEN;MAN PART NUMBER: 02-5063;MANUFACTURER: ROEBUCK | 1 | |
| 08-1100T | TUNGSTEN L BUCKING BAR;PART NUMBER:08-1100T;MAKE:US AIR TOOLS. | 1 | |
| 08-1103T | TUNGSTEN BUCKING BARS TOOL | 1 | |
| 08-1106T | TUNGSTEN BLOCK TOOL | 1 | |
| 08-1113T | TUNGSTEN BUCKING BARS TOOL | 1 | |
| 0U145920 | TOOLMANUALCRANKINGSTOP THSACTUATOR | 24 | |
| 0U190857 | TOOL-JAMMINGSIMULATI | 28 | |
| 10-01021 | LIGHT READING TACHOMETER (TO VERIFY TACHOMETER READINGS) (AIRCRAFT TOOL & SUPPLY, E.G. 310B) | 4 | |
| 10-60545-206S | TOOL SET FOR BEARINGS | 1 | |
| 105-14101W7 | NEEDLE BEARINGS DRIVE TOOL | 1 | |
| 105-14101W7/PHP | NEEDLE BEARINGS DRIVE TOOL | 1 | |
| 10801044 | TOOL-WASTELINE, VACLAV2 DESCALINGSYSTEM 240/440V/3~60HZ | 2 | |
| 109-3101-87-113 | TOOL ASSY, M/R GRIP BUSHINGS REMOVAL/INSTALLATION | 1 | |
| 109-3101-93-101 | TOOL SET, ROTATING SCISSORS UPPER LINK BUSHINGS REMOVAL/INSTALLATION GF-19-00 | 3 | |
| 109-3101-93-123 | TOOL SET, M/R ROTATING SCISSOR UPPER LINK BUSHINGS REMOVAL/INSTALLATION | 1 | |
| 109-3130-34-1 | TOOL, T/R HUB BUSHINGS INSTALLATION | 1 | |
| 109-3130-34-5 | TOOL T/R HUB BUSHINGS INSTALLATION | 1 | |
| 109-3130-56-109 | TOOL,TAIL ROTOR GRIP BUSHINGS INSTALLATION | 1 | |
| 109-3130-58-101 | TOOL, TR HUB BUSHINGS REMOVAL | 1 | |
| 109-3130-87-101 | AW119 TOOL TAIL ROTOR HUB BUSHINGS REMOVE/INSTALL | 1 | |
| 109-3130-87-105 | TOOL ASSEMBLY, TAIL ROTOR HUB BUSHINGS INSTALLATION | 1 | |
| 109-3131-02-101 | TOOL, T/R BLADE BUSHINGS REMOVAL/INSTALLATION | 1 | |
| 1100 | TOOL - REM / INST OF SEAL RETAINING RINGS | 6 | |
| 114-1150 | "GUIDE" TOOL FOR INSTALLATION OF PISTONS INTO ADJUSTER SLEEVE EXCLUDER RINGS | 1 | |
| 114-1285 | LOADING MANDREL TOOL FOR INSTALLATION OF BACKUP RINGS ON ADJUSTER SLEEVES | 1 | |
| 114-1344 | TOOL FOR MEASURE INNER DIAMETER OF AXLE BUSHINGS IN THE TORQUE PLATE ASSEMBLY AND THE PISTON HOUSING | 1 | |
| 114-1354 | LOADING MANDREL TOOL FOR INSTALLATION OF BACKUP RINGS ON AN ADJUSTER SLEEVE | 1 | |
| 114-1355 | SPLIT RING TOOL FOR RESIZING BACKUP RINGS ON ADJUSTER SLEEVES | 1 | |
| 114-1356 | TOOL THAT RESIZES BACKUP RINGS ON AN ADJUSTER SLEEVES | 1 | |
| 114-1423-AZL | SPLIT RING TOOL FOR SIZING BACKUP RINGS ON ADJUSTER SLEEVES | 1 | |
| 114-1586 | SPLIT RING TOOL FOR RESIZING BACKUP RINGS ON AN ADJUSTER SLEEVE | 1 | |
| 114-1587 | TOOL THAT RESIZES BACKUP RINGS | 1 | |
| 114-1587-AZL | TOOL THAT RESIZES BACKUP RINGS | 1 | |
| 114-1597 | TOOL THAT HOLDS TORQUE PLATES (95A) WHEN BUSHINGS (90A) ARE INSTALLEDREMOVED | 1 | |
| 114-1598 | TOOL THAT PUSHES THE BUSHINGS (90A) OUT OF TORQUE PLATES (95A) | 1 | |
| 114-1609 | TOOL THAT RESIZES BACKUP RINGS ON AN ADJUSTER SLEEVE | 1 | |
| 114-323 | PISTON SLEEVE TOOL RINGS (2 IT) | 1 | |
| 114-422 | TOOL-BACK UP RINGS SIZES | 1 | |
| 114-437 | TOOL THAT SIZES BACKUP RINGS ON AN ADJUSTER SLEEVE | 1 | |
| 114-780-1 | LOADING MANDREL TOOL FOR INSTALLATION OF BACKUP RINGS ON AN ADJUSTER SLEEVE | 1 | |
| 114-780-2 | PUSHER TOOL FOR INSTALLATION OF BACKUP RINGS ON ADJUSTER SLEEVES | 1 | |
| 114-780-3 | SPLIT RING TOOL THAT SIZES BACKUP RINGS ON ADJUSTER SLEEVES | 1 | |
| 114-780-4 | TOOL THAT SIZES BACKUP RINGS ON ADJUSTER SLEEVES | 1 | |
| 114-784-1 | LOADING MANDREL TOOL FOR INSTALLATION OF BACKUP RINGS ON AN ADJUSTER SLEEVE | 1 | |
| 114-784-2 | PUSHER TOOL FOR INSTALLATION OF BACKUP RINGS ON AN ADJUSTER SLEEVE | 1 | |
| 114-784-3 | SPLIT RING TOOL FOR RESIZING BACKUP RINGS ON ADJUSTER SLEEVES | 1 | |
| 114-784-4 | TOOL THAT RESIZES BACKUP RINGS ON AN ADJUSTER SLEEVES | 1 | |
| 117-15004W6 | PUSHING IN/OUT TOOL SET OF BLADE FITTING BUSHINGS | 1 | |
| 200.400 | UNIVERSAL GREASE TOOL FOR LUBRICATING AIRCRAFT WHEEL BEARINGS | 1 | |
| 14155 | O RINGS UNIVERSAL INSTALLATION TOOLS | 1 | |
| 14602 | AIR TOOL (FEMALE) FITTINGS | 1 | |
| 160200-9Z003 | SICMA SPECIAL TOOLINGS P/NO. 160200-9Z003 | 12 | |
| 16A11164-5 | EXTRACTOR TOOL, BOLT - WING ATTACH FITTINGS | 1 | |
| 19843J | INSERTION TOOL FOR BEARINGS | 2 | |
| 1C8137G01-A | Tool set,install/remove bushings-hpt rotor blade retainer | 1 | |
| 1C9150 | TOOL SET, JACK SCREWS-ENGINE BEARINGS & SEALS | 1 | |
| 1C9150G02 | Tool Set, Jack Screwsengine Bearings & Seals | 1 | |
| 2.000.000 | UNIVERSAL GREASE TOOL FOR LUBRICATING AIRCRAFT WHEEL BEARINGS | 1 | |
| 20817J | INSERTION TOOL FOR BEARINGS | 1 | |
| 233456ST2 | DIE SWAGING/STAKING TOOLS: MKP3A BEARINGS AND MKP4FS BEARINGS | 1 | |
| 234350 | HAND TOOL TO SPREAD SEALANT ON FAIRINGS | 6 | |
| 2BM52898 | TOOL USED TO INSTALL RETAINING RINGS | 1 | |
| 2C14138G01 | TOOL - FIXT REM MATING SEAL RINGS | 11 | |
| 2C14138G02 | TOOL - FIXT REM MATING SEAL RINGS | 14 | |
| 2C14684 | TOOL SET, REMOVE HP COMPR. STATOR VANE SPRINGS | 1 | |
| 2C14684 REV D | TOOL SET, REMOVE HP COMPR. STATOR VANE SPRINGS | 1 | |
| 2C14684G02 | TOOL SET, REMOVAL-HPC STATOR VANE SPRINGS | 4 | |
| 2C6998 | TOOL SET-MATING SEAL RINGS | 1 | |
| 2C7798 | TOOL SET-VSV LEVER BUSHINGS R/I | 1 | |
| 2OHME65B00718 | MISC TOOL -0 FITTINGS, JT9D | 1 | |
| 360A91330000 | PRESS OUT CUFF BUSHINGS TOOL (SAP CODE 8334911) | 1 | |
| 3G6305G00131 | TOOL KIT, GIMBAL/TORQUE TUBE BUSHINGS REPL. | 1 | |
| 3G6305G00132 | TOOL KIT,GIMBAL / TORQUE TUBE BUSHINGS REPL. | 1 | |
| 3G6305G00232 | TOOL,GIMBAL/TORQUE TUBE BUSHINGS REMOVAL (NSCM A0126) | 1 | |
| 3G6305G01232 | TOOL,GIMBAL/TORQUE TUBE BUSHINGS REMOVAL (NSCM A0126) | 1 | |
| 3G6305G29431 | TOOL KIT, GIMBAL/TORQUE TUBE BUSHINGS REPLACEMENT | 1 | |
| 3G6405G08632 | Tool, T/R bushingsinstallation | 1 | |
| 50997 | 21 POCKETS TOOL BELT WITH 35 RINGS ACO | 1 | |
| 50999 | ACCESSORY WITH TWO RINGS FOR TOOLS BELT ACO | 1 | |
| 4170063430 | TOOL, BALL BEARINGS EXTRACTION | 1 | |
| 4610308511 | ASSEMBLY TOOL FOR BEARINGS | 1 | |
| 4617001826 | BALL BEARINGS ASSEMBLY TOOL | 1 | |
| 5253 #3 | DRIVE TOOL (FOR ALEMITE 1728B LUBRICATION FITTINGS) | 9 | |
| 5253-3 | Tool - Lubrication Drive, Straight Type Lubrication Fittings (Minimum Buy = 3) | 9 | |
| 5254 #1 | DRIVE TOOL (FOR ALEMITE 1646B AND 1992B LUBRICATION ANGLE FITTINGS) | 6 | |
| 5254-1 | Tool - Lubrication Drive, Angle Type Lubrication Fittings | 6 | |
| 556 | XZT AIRCRAFT AVIATION TOOLS SCHRADER,HIGH PRESSURE STRUCT NO AIR LOSS COUPLER 556,COUPLINGS TO FILL | 4 | |
| 5328 | TOOL, BALL BEARINGS EXTRACTION | 1 | |
| 621200-1 | CRIMP TOOL, HEX PNEUMATIC (KINGS DIES) | 1 | |
| 6252T681 | TOOLINGS AND COMPONENTS MAT | 1 | |
| 63824-2800 | Extractor Tool for Milli-Grid™ 2.0 Housings | 1 | |
| 65601NSA5101000 | INSERTION TOOL-NSA5101 RETAINING RINGS | 4 | |
| 65601NSA5101001 | TOOL-INSERTION RETAINING RINGS | 1 | |
| 65601NSA5101101 | TOOL INSERTION RETAINING RINGS | 1 | |
| 65601NSA5101119 | TOOL-INSERTION RETAINING RINGS | 1 | |
| 670BA54004K90-1 | KIT, PYLON BUSHINGS TOOLS | 1 | |
| 68101NSA5101000 | SWAGING TOOL,INSTALLATION-NSA5101 RINGS | 4 | |
| 700-T-091-19 | PRESSURE TEST TOOL - 700-T-091-19 WITH INTERCONNECT FITTINGS AND PLUGS | 1 | |
| 700-T-091-9 | PRESSURE TEST TOOL - 700-T-091-9 WITH INTERCONNECT FITTINGS AND PLUGS | 1 | |
| 704655 | TOOLING FOR UNCRIMPING SELF ALIGNING BEARINGS | 1 | |
| 708499 | Tool for Fitting the Packings | 1 | |
| 713039 | TOOL FOR DISASSEMBLING RINGS | 1 | |
| 715705 | ASSEMBLY TOOL FOR RETAINING RINGS | 1 | |
| 716451 | ASSEMBLY TOOL FOR BEARINGS | 1 | |
| 716452 | CRIMPINGS TOOL FOR BEARINGS | 1 | |
| 733063 | TOOL ASSEMBLY, DISASSEMBLY SPRINGS | 1 | |
| 733624 | TOOL FOR THE DISASSEMBLY OF THE BEARINGS | 1 | |
| 776-407-1 | TOOL FOR NEEDLE BEARINGS | 1 | |
| 776-407-2 | TOOL FOR NEEDLE BEARINGS | 1 | |
| 776-407-3 | TOOL FOR NEEDLE BEARINGS | 1 | |
| 79001401-1 | PISTON OD PACKING SIZING TOOL (USED TO PROTECT PISTON ID PACKINGS DURING INSTALLATION OF ADJUSTER PIN (WILL PERFORM SAME FUNCTION AS PN 2558900-2)) | 1 | |
| 79001403-1 | BUSHING OD PACKING SIZING TOOL (USED TO SIZE BUSHING OD PACKINGS AFTER INSTALLATION (WILL PERFORM SAME FUNCTION AS PN 2558900-3) | 1 | |
| 8087A | POLISHING TOOLS FOR CRANKSHAFTS BEARINGS | 1 | |
| 8087B | POLISHING TOOLS FOR CRANKSHAFTS BEARINGS 2-1/4 TO 2-5/8 | 1 | |
| 83006-809-00088 | STAKING TOOL (PILOT AND PUNCH), DUAL BEARINGS | 1 | |
| 856A2389G03 | Tool set pusher stage 3 lpt disk budhings | 1 | |
| 856A2408G01 | TOOL SET, PUSHER - STAGE 3 LPT DISK BUSHINGS (PUSHER TOOL) | 1 | |
| 856A2675G02 | TOOL SET, LEAK TEST AGB O-RINGS | 2 | |
| 856A2735G01 | TOOL SET, PUSHERS - BEARINGS AGB | 2 | |
| 856A2739G03 | TOOL SET, PUSHERS - TGB BEARINGS | 3 | |
| 856A2742G03 | TOOL SET, PUSHERS - BEARINGS, TGB (BEARING PUSHER TOOL SET) | 4 | |
| 856A2743 | TOOL SET; PUSHERS-BRNGS AGB | 1 | |
| 856A2743G02 | Tool set pusher-bearings agb | 4 | |
| 856A2747 | PULLER TOOL SET BEARINGS AG | 1 | |
| 856A2747G01 | Puller Tool Set - Bearings, AGB/TGB (tool set) | 2 | |
| 856A2747G02 | PULLER TOOL SET BEARINGS AGB/TGB | 2 | |
| 856A2748G03 | PULLER TOOL SET BEARINGS AGB/TGB | 4 | |
| 856A3286 | TOOL SET, PULLER PADS - AGB/TGB BEARINGS REMOVAL | 1 | |
| 856A3288 | TOOL SET PULLER BEARINGS | 1 | |
| 856A3303 | TOOL SET, PUSHER - BEARINGS | 1 | |
| 856A3330 | TOOL SET - SEAL FITTINGS | 1 | |
| 856A3330G01 | TOOL SET SEAL FITTINGS | 12 | |
| 856A3568G02 | Tool Set Pushers Bearings Agb | 1 | |
| 856A3607 G03 | Tool Set Pusher ‐ TGB Bearings | 1 | |
| 856A3724G02 | Sighting Tool Set- ( only have G01 drawings) | 8 | |
| 856A3860 | TOOL SET, PAD, PULLER - BEARINGS, AGB (PULLER) | 1 | |
| 8G6230G02631 | TOOL KIT,M/R SCISSOR BUSHINGS REPL | 1 | |
| 8G6430G04931 | TOOL KIT, T/R BUSHINGS REPLACEMENT | 1 | |
| 8Z10178-001-58 | TOOL BRACKET REPLACEMENT PCU FITTINGS | 1 | |
| 97A29102090000 | TOOL SET-REMOVAL BOBBINS AND INSTALLATION RINGS | 15 | |
| 97A76102003000 | TOOL: SPRINGSCALE | 8 | |
| 97L53008852000 | TOOL- EXTRACTOR, LATCH BUSHINGS | 1 | |
| 98A27407508000 | WERKZEUGSATZ FUER HLW-MONTAGE TOOL SET INSTALLATION AND REMOVAL HORIZONTAL STABILIZER BEARINGS | 1 | |
| 98A54403005000 | TORQUE,TOOL BEARINGS | 5 | |
| 98A54603005000 | TORQUE,TOOL-RIB18, SPHERICAL BEARINGS | 11 | |
| 98A54603005100 | TORQUE,TOOL-RIB23, SPHERICAL BEARINGS | 1 | |
| 98A54603005101 | TORQUE,TOOL-RIB21, SPHERICAL BEARINGS | 1 | |
| 98A54603005102 | TORQUE,TOOL-RIB24, SPHERICAL BEARINGS | 1 | |
| 98A54603005200 | TORQUE,TOOL-RIB20, SPHERICAL BEARINGS | 1 | |
| 98A54603005201 | TORQUE,TOOL-RIB19, SPHERICAL BEARINGS | 1 | |
| 98A54603005207 | TORQUE,TOOL-RIB22, SPHERICAL BEARINGS | 1 | |
| 98A76103500000 | RINGS AND COMPRESSED SPRINGS HOLDING TOOL | 1 | |
| 98D27407517000 | Tool Set, THS Spherical Bearings | 21 | |
| 98D29003502001 | FILLTOOLFILLINGTOOL-BRAKINGSYSTEMCALIBRATION | 10 | |
| 98D29003502002 | FILLINGTOOL-BRAKINGSYSTEM | 4 | |
| 98D35208729000 | TEST TOOL-BREATHINGSYSTEM | 8 | |
| 98D35208729001 | TEST TOOL-BREATHINGSYSTEM | 9 | |
| 98S57605002000 | BALANCING TOOLING FINS WITH TAB SPRINGS | 3 | |
| 9970-957-139 | TOOL SET - FITTING, O-RINGS - LUBRICATION UNIT | 1 | |
| 9970-957-141 | TOOL SET, ASSY/DISASSY - SCAVENGE FILTER HOUSINGS, LUBRICATION UNIT | 1 | |
| 9970-957-149 | TOOL SET, ASSY/DISASSY - SCAVENGE FILTER HOUSINGS, LUBRICATION UNIT | 1 | |
| 99A34103004000 | TOOL: BLANKINGSTATIC 5100 | 10 | |
| 9C1369 | TOOL - INSTALL-AGB MATING RINGS | 1 | |
| 9C1369G01 | TOOL, INSTALL-AGB MATING RINGS | 2 | |
| 9C2420G03 | Extractiing tool kit outer bushings vsv hpc | 1 | |
| A32091-0781 | BEARINGS REMOVAL TOOL | 1 | |
| A32091-1312 | EARINGS REMOVAL TOOL | 1 | |
| AC21866000 | TOOL FOR REM/INST TORQUE PLATE BUSHINGS | 3 | |
| AC21869000 | FIXTURE TOOL (for the back-up rings on the piston) | 8 | |
| AK100 | CRIMP TOOL, AK & KINGS DIES ONLY | 1 | |
| AS350.000.047 | TOOL FOR INSTALLING LAMINATED HALF-BEARINGS OF THE TAIL ROTOR | 1 | |
| AZL02339-R00 | TOOLS SET FOR REM/INST SLEEVES/BEARINGS OF THE SPOILERS - A320 | 1 | |
| AZL04543-R00 | TOOLS SET FOR REM/INST SLEEVES/BEARINGS OF THE ELEVATORS - A320 | 1 | |
| B315790 | TOOL, LUBRICATION FITTING - "EASY OUT", REMOVES BROKEN LUBE FITTINGS AND INSTALLS REPLACEMENTS (1/4"-28) (ALEMITE CORP) | 3 | |
| BACB10X4TM | LOOKING TO FIND A ROLLER STAKING TOOL FOR THE FOLLOWING BEARINGS. THE SPEC FOR THIS IS BAC5435. IF YOU NEED A COPY OF THE SPEC, FEEL FREE TO EMAIL ME. BEARINGS; PN: BACB10X4TMPN: BACB10A203GM2 PLEASE NOTE THIS IS FOR THE MILITARY AND NEEDS TO BE CON | 1 | |
| BM325 | WIRELOCKINGSAFETYCABLETOOL | 1 | |
| C25002-1 | REMOVAL/INSTALLATIONTOOL-737BOEINGSKYINTERIO | 9 | |
| C36001-10 | FLARELESS ELBOW MS5 (BELONGS TO TOOL C36001-63) | 3 | |
| C36001-11 | FLARELESS ELBOW REDUCER MS6 (BELONGS TO TOOL C36001-63) | 2 | |
| C36001-110 | LONG HOSE ASSY (BELONGS TO TOOL C36001-63) | 2 | |
| C36001-13 | FLARELESS TUBE END CAP MS4 (BELONGS TO TOOL C36001-63) | 5 | |
| C36001-21 | UNION MS6 (BELONGS TO TOOLS C36001-63) | 6 | |
| C36001-67 | UNION MS4/MS6 (BELONGS TO TOOL C36001-63) | 1 | |
| C36001-68 | FLARELESS TUBE END CAP WITH 0.020-INCH HOLE MS4 (BELONGS TO TOOL C36001-63) | 2 | |
| C36001-69 | FLARELESS TUBE END CAP WITH 0.032-INCH HOLE MS6 (BELONGS TO TOOL C36001-63) | 1 | |
| C36001-82 | SHORT HOE ASSEMBLY (BELONGS TO TOOL C36001-82) | 2 | |
| C36001-9 | FLARELESS ELBOW REDUCER MS4 (BELONGS TO TOOL C36001-63) | 3 | |
| CANLABT5011 | HANDLING TOOLS AND TONGS | 1 | |
| COAXIAL KIT | COAXIAL FITTINGS & SPANNERS TOOL | 1 | |
| CTA-22 | CALIBRATION TOOLS FOR AVIONIC TOOLINGS | 1 | |
| D622M0340101D523-01 | PRESS IN CUFF BUSHINGS TOOL (SAP CODE 8334910) | 1 | |
| D622M0340101D531-01 | PRESS OUT CUFF BUSHINGS TOOL (SAP CODE 8334911) | 1 | |
| D622M0340L01D531-01 | PRESS OUT CUFF BUSHINGS TOOL (SAP CODE 8334911) | 1 | |
| D651P0001951 | TAIL ROTOR DRIVE SHAFT BEARINGS TOOL SET | 1 | |
| DLXRV-2X | Deluxe RV Aircraft Tool Kit - 658 Pieces! Comprehensive Kit with 2X Rivet Gun - Now Includes TUNGSTEN BUCKING BAR! | 1 | |
| DLXRV-3X | Deluxe RV Aircraft Tool Kit - 658 Pieces! Comprehensive Kit with 3X Rivet Gun - Now Includes TUNGSTEN Bucking Bar! | 1 | |
| E2J65333 | GUIDE TOOL - PISTON RINGS, SEAL CARRIER, RB211-524G/H | 3 | |
| F1275349 | TOOLINGSCREW | 1 | |
| F1276873 | TOOLINGSHIM | 1 | |
| F26516000 | INSTALLATION TOOL (FOR THE BACK-UP RINGS ON THE SLEEVE) | 7 | |
| F26691000 | TOOL FOR INSTALLING THE BACK-UP RINGS ON THE PISTON | 3 | |
| F26692000 | TOOL FOR INSTALLING THE BACK-UP RINGS ON THE LINER. | 6 | |
| F26816000 | TOOL USED TO INSTALL AND RESIZE THE BACK-UP RINGS ON THE PISTONS. | 3 | |
| F26817000 | TOOL USED TO INSTALL AND RESIZE THE BACK-UP RINGS ON THE PISTON SLEEVES. | 2 | |
| F27170000 | TOOL INSTALLATION BACK UP RINGS | 2 | |
| F27219000 | TOOL FOR REMOVAL AND INSTALLATION OF PISTON BUSHINGS(1-450) | 2 | |
| F27267000 | BACKUP RINGS INSTALLATION TOOL ON PISTONS | 2 | |
| F27268000 | BACKUP RINGS INSTALLATION TOOL ON PISTON SLEEVES | 2 | |
| F27269000 | HUB BUSHINGS REMOVAL TOOL | 2 | |
| F27531000 | Tool to install and resize the back-up rings on the pistons | 3 | |
| F27532000 | Tool to install and resize the back-up rings on the pistons sleeves | 3 | |
| F27533000 | TOOL FOR THE REMOVAL AND INSTALLATION OF THE BUSHINGS | 3 | |
| F27536000 | TOOL FOR THE INSTALLATION OF THE BEARING CUPS RINGS ON THE PISTON | 2 | |
| F27537000 | TOOL FOR THE REMOVAL OF THE BEARING CUPS RINGS ON THE PISTON SLEEVE | 2 | |
| F50B955604 | TOOL SET FOR STABILIZER HINGE FITTINGS NDT | 1 | |
| F70335-1 | Line reaming tool set-entry door hinge support fittings | 4 | |
| F7XC205706200 | GREASING TOOL SET FOR AILERON BEARINGS | 1 | |
| G601R200008-1 | SWAGING TOOLS AILERON (BEARINGS MS14103-7A, MS14103-8, KR9CWGB) | 4 | |
| G700-270004-21 | SWAGING TOOL KIT KR5-CNGB BEARINGS | 1 | |
| G700-270004-25 | SWAGING TOOL KIT KR9-CWGB BEARINGS | 1 | |
| GFG700-20 | KINGS/DMC CRIMP TOOLKIT | 1 | |
| GSE55758 | Aft axle steering lock springs extension tool | 1 | |
| GSE55787 | COMPRESSIONTOOLLOCKINGSPRINGWINGLANDINGGEAR | 1 | |
| H-6E-B | CRIMP TOOL - HOLLINGSWORTH (12-10 Gauge Crimps FIT - FIIG) | 1 | |
| H20N | FEMALE NON-INUSLATED DIE SET – THIS IS A HOLLINGSWORTH CRIMP TOOL | 1 | |
| HORIZONTAL STAB SLINGS | CALIBRATE AND RE-CERTIFY THIS TOOL (HORIZONTAL STAB SLINGS) IN ACCORDANCE WITH BOEING DWG C55007 REV. D (OR LATER) AND LOLER 1998 (OR LATER). TEST/CALIBRATION CERTIFICATE MUST REFERENCE MAINTENANCE DATA (MANUAL/STANDARD) AND REVISION USED. ADDITIONAL REFE | 1 | |
| HS5-23100 | COLUMN RINGS LEADING TOOL | 1 | |
| HU23959 | TOOL - OPENING, PR DOORS GG FAIRINGS | 1 | |
| HXE18AC | BATTERY POWERED TOOL (KINGS/WINCHESTER) | 1 | |
| IDCT4103-6 | Drill Press Cutting Tool for Bearings MS14101-6 and MS14103-6 ** RKC4103-6 is equivalent to IDCT4103-6** | 1 | |
| IPCT-NSA8133-07 | TOOL FOR BEARINGS | 1 | |
| IPCT-NSA8133-7 | TOOL FOR BEARINGS | 1 | |
| IPCT4101-7 | TOOL FOR BEARINGS | 2 | |
| IPCT4103-7 | TOOL FOR BEARINGS | 2 | |
| IPIR4101-4 | TOOLS FOR REMOVING AND INSTALLING BEARINGS | 2 | |
| IPIR4103-5 | TOOLS FOR REMOVING AND INSTALLING BEARINGS | 1 | |
| IPIR410L-4 | TOOLS FOR REMOVING AND INSTALLING BEARINGS | 1 | |
| IPST-M81936/1-14 | STAKING TOOL ROLLER BEARINGSTAKING TOOL ROLLER BEARING | 1 | |
| IPST-NSA8133-07 | TOOL FOR BEARINGS | 1 | |
| IPST-NSA8133-7 | TOOL FOR BEARINGS | 1 | |
| IPST4101-5 | STAKING TOOL ROLLER BEARINGSTAKING TOOL ROLLER BEARING | 2 | |
| IPST4101-6 | STAKING TOOL ROLLER BEARINGSTAKING TOOL ROLLER BEARING | 2 | |
| IPST4103-7 | TOOL FOR BEARINGS | 1 | |
| K47002 | Leak Check Tool, NGS | 1 | |
| K47002-35 | LEAK CHECK TOOL - NGS | 6 | |
| K47003-1 | 787 HOIST ADPT NGS MOTOR TOOL | 9 | |
| KTH-1000 | CRIMP TOOL - WINCHESTER ELECTRONICS (KINGS) | 10 | |
| KTH1000 | KINGS CRIMP TOOL | 10 | |
| L133M6203101 | MAIN ROTOR BLADESBUSHINGS MOUNTING TOOL | 1 | |
| L642G1002101 | PRESS IN CUFF BUSHINGS TOOL (SAP CODE 8334910) | 2 | |
| M0NT23484 | TOOL FOR ASSEMBLY OF BUSHINGS | 1 | |
| M0NT23487 | TOOL FOR ASSEMBLY ON BUSHINGS ON FLANGES | 1 | |
| M0NT23811 | TOOL FOR ASSEMBLY OF THE BUSHINGS | 1 | |
| M0NT733063 | TOOL ASSEMBLY, DISASSEMBLY SPRINGS | 1 | |
| M46972 | RINGS-TOOL GIVING BACK UP | 1 | |
| MIT012N0073 | NGS BRACKETRY ALIGNMENT TOOL | 2 | |
| MIT012N0080 | NGS WING TO BODY PANEL 191AL ALIGNMENT TOOL | 2 | |
| MIT012N0081 | NGS WING TO BODY PANEL 193EL ALIGNMENT TOOL | 2 | |
| MIT340A5006-1 | NGS PRESSURE TEST TOOL KIT | 1 | |
| MIT340N5002-1 | MISCELLANEOUS TOOL NGS PRESSURE TOOL | 1 | |
| MIT65B01925 | RESTRAINING TOOL - INBOARD AND OUTBOARD ACTUATOR FITTINGS, OUTBOARD TRAILING EDGE MIDFLAP | 1 | |
| MIT65C25798-13 | MISC TOOL-HINGE FITTINGS | 3 | |
| OU190857 | TOOL-JAMMINGSIMULATION | 28 | |
| PDL | TOOL FOR BEARINGS | 1 | |
| PS7033687-001 | SOFTWARE, AIRCRAFT PERSONALITY MODULE (APM) SETTINGS TOOLS | 1 | |
| PSE/ES/2014/088 REV 1 | TOOL SET, TR PITCH CONTROL LEVER BUSHINGS REPLACEMENT | 1 | |
| R47163 | "TOOL FOR THE REMOVAL AND INSTALLATION OF THE SPRINGS (1-200)" | 1 | |
| R47168 | TOOLS FOR THE INSTALLATION OF BUSHINGS | 1 | |
| RB0006-809-00090-1 | STAKING TOOL (PILOT AND PUNCH), DUAL BEARINGS | 2 | |
| RBE105-14101W7 | NEEDLE BEARINGS DRIVE TOOL | 2 | |
| RBW109-3130-87-101 | AW119 Tool Tail Rotor Hub Bushings Remove/Install | 1 | |
| RBW109-3130-87-103 | Tool Assembly, Tail Rotor Hub Bushings Removal | 2 | |
| RBW109-3130-87-105 | Tool Assembly, Tail Rotor Hub Bushings Installation | 2 | |
| RBW6230G02631-8G | TOOL KIT,M/R SCISSOR BUSHINGS REPL | 2 | |
| RBW6305G00132- 3G | TOOL KIT, GIMBAL/TORQUE TUBE BUSHINGS REPL. | 3 | |
| RBW6305G01232-3G | TOOL,GIMBAL/TORQUE TUBE BUSHINGS REMOVAL (NSCM A0126) | 2 | |
| RBW6405G08632-3G | TOOL KIT, T/R BUSHINGS REPLACEMENT. / DART | 2 | |
| RBW6430G04931-8G | TOOL KIT, T/R BUSHINGS REPLACEMENT | 2 | |
| RKC4101-7 | TOOL FOR BEARINGS | 2 | |
| RRT106092 | Balance Bearing Housing Tool- RR has to supply bearings 2 off required | 1 | |
| RST 1003 | STAKING TOOL ROLLER BEARINGSTAKING TOOL ROLLER BEARING | 2 | |
| RST 1006 | STAKING TOOL ROLLER BEARINGSTAKING TOOL ROLLER BEARING | 3 | |
| RST 1007 | STAKING TOOL ROLLER BEARINGSTAKING TOOL ROLLER BEARING | 3 | |
| RST 1009 | STAKING TOOL ROLLER BEARINGSTAKING TOOL ROLLER BEARING | 2 | |
| RST 1016 | STAKING TOOL ROLLER BEARINGSTAKING TOOL | 2 | |
| RST 2003 | STAKING TOOL ROLLER BEARINGSTAKING TOOL ROLLER BEARING | 1 | |
| RST1003 | STAKING TOOL ROLLER BEARINGSTAKING TOOL ROLLER BEA | 2 | |
| RST1016 | STAKING TOOL ROLLER BEARINGSTAKING TOOL ROLLER BEARING | 2 | |
| RST3008 | TOOL FOR BEARINGS | 3 | |
| ST-115 | TOOL, INSTALL AND REMOVE PROPELLER FLANGE BUSHINGS ADQUIRIR | 2 | |
| ST848 | Installation Tools - O-Rings | 16 | |
| ST878D | Standard Tool - Sleeveset for Presetting BACS13AP Flareless Tube Fittings | 8 | |
| ST879A | Hand Presetting Tool - Flareless Tube Fittings MS21922 | 8 | |
| ST879A-D-4 | Hand Presetting Tool for Flareless Tube Fittings | 1 | |
| ST879A-D-6 | Hand Presetting Tool for Flareless Tube Fittings | 2 | |
| ST879A-M-4-028 | Hand Presetting Tool for Flareless Tube Fittings | 1 | |
| ST879A-M-6-035 | Hand Presetting Tool for Flareless Tube Fittings | 1 | |
| ST879A1 | TOOL KIT, HAND PRESETTING, FLARELESS TUBE FITTINGS | 2 | |
| ST918A-1771-2952 | BEARINGS INSTALL TOOL | 3 | |
| ST918A-250-687 | BEARINGS INSTALL TOOL | 3 | |
| ST918A-250-901 | BEARINGS INSTALL TOOL | 3 | |
| ST918A-312-781 | BEARINGS INSTALL TOOL | 3 | |
| ST918A-625-1312 | BEARINGS INSTALL TOOL | 1 | |
| ST919-901 | BEARINGS INSTALL TOOL | 3 | |
| ST925-1771-2952 | BEARINGS POINT STACK TOOL | 3 | |
| ST925-250-901 | BEARINGS POINT STACK TOOL | 3 | |
| ST927-1 | BEARINGS REMOVE TOOL | 8 | |
| ST927C-5 | BEARINGS ROLLER REMOVAL TOOL | 5 | |
| ST932-P-249 | BEARINGS ROLLER SWAGE TOOL | 3 | |
| ST937D-1 | STANDARD TOOL - ANVIL SWAGE NACELLE SUPPORT FITTINGS | 1 | |
| T-71591A, B | Removal Tool, Bearings | 1 | |
| T-71595A, B | Installation Tool, Bearings | 1 | |
| T101655-101 | TOOL FOR RETAINING RINGS | 1 | |
| T46320 | TOOL FOR THE REMOVAL OF THE BUSHINGS | 1 | |
| T46686 | TOOL FOR THE INSTALLATION OF THE BUSHINGS | 1 | |
| TA03318 | TOOL KIT - REGULATOR ADJUSTINGSCREW TO BODY | 1 | |
| TMY20-20-001 | BEAD FORMING TOOL KIT FOR "W-O-F" COUPLINGS | 1 | |
| TMY20-27-601 | TOOL SET FOR PRESSURE GREASING OF FLIGHT CONTROL LINKAGE BEARINGS | 1 | |
| TN326330 | PIN ALIGNMENT TOOL, HORIZONTAL STABILIZER FITTINGS | 1 | |
| TOOLEGIN 10 | TL TOOLEGIN AIR HOSE FITTINGS 1/4" AIR COUPLER | 1 | |
| TOOLEGIN10 | TL TOOLEGIN AIR HOSE FITTINGS 1/4" AIR COUPLER & PLUG KIT,36 PIECES QU | 1 | |
| TRI WINGS BIT SET | TRI WINGS BIT SET TOOL | 1 | |
| VDA1-19 | ASSEMBLY TOOL FOR SEALS AND O-RINGS | 1 | |
| WA27-309 | Pneumatic Indent Crimp Tool - Equivalent to M309 Selector Settings 1-4 | 2 | |
| RST 1005 | STAKING TOOL ROLLER BEARINGSTAKING TOOL ROLLER BEARING | 3 | |
| RST 1016 | STAKING TOOL ROLLER BEARINGSTAKING TOOL ROLLER BEARING | 2 | |
| 98A54603005000 | TOOL,TORQUE,RIB 18,SPHERICAL BEARINGS | 11 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
