| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 942162 | NDT TRANSDUCER | 1 | |
| TRANSDUCER | NDT TRANSDUCER | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 99D54403005000 | TRANSDUCER HOLDER, ULTRASONIC (NDT) | 2 | |
| 99D57204116000 | TRANSDUCER GUIDE BLOCK (NDT) | 3 | |
| A571S-RM | UT Transducer A571S-RM 5MHz, 45 degree, Steel (NDT) | 2 | |
| A572S-RM | UT Transducer A572S-RM, 5MHz, 60 degree, steel (NDT) | 2 | |
| A573S-RM | UT Transducer A573S-RM, 5MHz, 70 degree, steel (NDT) | 2 | |
| A573SRM | UT TRANSDUCER A573S-RM, 5MHZ, 70 DEGREE, STEEL (NDT) | 2 | |
| A591S-RM | UT Transducer A591S-RM, 5MHz, 45 degree, Al (NDT) | 1 | |
| A592S-RM | UT Transducer A592S-RM, 5MHz, 60 degree, Al (NDT) | 1 | |
| A593S-RM | UT Transducer A593S-RM, 5MHz, 70 degree, Al (NDT) | 2 | |
| AFC-0514 | 5MHZ TRANSDUCER, .25" Ø ELEMENT, .275"Ø CASE, FOR POSITIONER NDT3125P | 1 | |
| AFC-0530 | 5MHZ TOP MOUNT FINGERTIP CONTACT TRANSDUCER, .187"Ø ELEMENT, CASE SIZE: .25"Ø x .625"L. USED WITH NDT6030P. 767 PT 4 57-50-10 PAGE 15. | 1 | |
| AFC-169 | 5MHz STRAIGHT BEAM TRANSDUCER WITH SIDE MOUNT MICRODOT CONNECTOR.( .400"H x .375" O.D.), Used with NDT3023P1, NDT3023P2, NDT3023P3. Includes Test Report and Certificate of Conformance. | 1 | |
| AFC-255T | TECHNA NDT STRAIGHT BEAM CONTACT TRANSDUCER, 5.0MHZ, .25" Ø ELEMENT, .312"Ø CASE, .500" TALL SUPPLIED WITH A TOP MOUNTED MICRODOT CONNECTOR. Includes Test Report and Certificate of conformance. | 1 | |
| AFC-518T | 5MHZ TOP MOUNT FINGERTIP CONTACT TRANSDUCER, .187Ø ELEMENT, .25Ø CASE. Used with NDT616P | 1 | |
| AFC-525-7SS | NDT ENGINEERING CORP. / OLYMPUS NDT 5MHz LONGITUDINAL(STRAIGHT BEAM) TRANSDUCER, .25"Ø ELEMENT, .375"Ø CASE, .700" TALL, SIDE MOUNT MICRODOT CONNECTOR. Includes test Report and Certificate of Conformance. | 1 | |
| AFC-525-7T | NDT ENGINEERING CORP. / OLYMPUS NDT 5MHz LONGITUDINAL(STRAIGHT BEAM) TRANSDUCER, .25"Ø ELEMENT, .375"Ø CASE, .700" TALL, TOP MOUNT MICRODOT CONNECTOR. Includes test Report and Certificate of Conformance. | 1 | |
| AFC-K1SM | TRANSDUCER NDT-US 1.0MHZ 1.0IN DIA | 2 | |
| AFK-1014 | Custom Ultrasonic Kit, PART 4 53-10-13 for the WING REAR SPAR - STA 663.75 REAR SPAR BULKHEAD SIDE FRAME FITTING FAIL SAFE STRAP. Kit includes 1 of each AFM-560AT & AFS-0541 Transducers, 1 NDT3312 Reference Standard and 1 ABNC-MD6. Supplied with a waterpr | 1 | |
| AFK-1030 | Cusom Ultrasonic Inspection Kit for Boeing 787. Kit contents include: NDT815 reference standard. Transducer part numbers: AFS-0570-1R, AFS-0570-1L, AFS-0570-2R, AFS-0570-2L, AFS-0570-3R, AFS-0570-3L, AFS-0570-4R, AFS-0570-4L, AFS-0570-5R, AFS-0570-5L | 1 | |
| AFK-1031UT | NDT STANDARDS AND TRANSDUCERS KIT | 1 | |
| AFM-545AT | NDTTRANSDUCER | 1 | |
| AFM270AS | TRANSDUCER 70° 2, 25MHZ (AEROFAB NDT) | 1 | |
| AFM270AT | TRANSDUCER 70° 2,25 MHZ (AEROFAB NDT) | 1 | |
| AFM570AS | TRANSDUCER 70° 5MHZ (AEROFAB NDT) | 1 | |
| AFM570AT | TRANSDUCER 70°5MHZ (AEROFAB NDT) | 1 | |
| AFS-0519 | CUSTOM BOEING ANGLE BEAM TRANSDUCER, 50°, 5MHz, .187" x.187" ELEMENT WITH TOP MOUNTED MICRODOT CONNECTOR. .550" x .26" x .450" USED WITH NDT596 . Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0524 | 5 MHz shear wave transducer .25" x .25" square element. 1.025 radius top mount connector. used with NDT3238 ref. standard | 1 | |
| AFS-0525 | 5 MHz COMPOUND SHEARWAVE TRANSDUCER USED FOR LEFT SIDE EDM BORE NOTCH ON NDT3242 | 1 | |
| AFS-0526 | 5 MHz COMPOUND ANGLE SHEARWAVE TRANSDUCER WITH A 2.275 INCH RADIUS. USED TO SCAN NEAR SIDE EDM NOTCH ON NDT3243 | 1 | |
| AFS-0527 | 5 MHz SHEARWAVE TRANSDUCER USED TO SCAN MID BORE EDM NOTCH ON NDT3242 and NDT3243, 35° INCIDENT ANGLE | 1 | |
| AFS-0538L | CUSTOM SHEARWAVE TRANSDUCER, 5MHZ, LEFT SIDE, FOR NDT6052 | 1 | |
| AFS-0538R | CUSTOM SHEARWAVE TRANSDUCER, 5MHZ, RIGHT SIDE, FOR NDT6052 | 1 | |
| AFS-0539 | Custom 5MHz 45 degree shearweave ring transducer which features both right and left scanning directions. Ref. Standard NDT796 | 1 | |
| AFS-0550 | CUSTOM ANGLE BEAM TRANSDUCER 70 DEGREES 58 INC. 5MHz .25"x.160" ELEMENT TOP MOUNT MICRODOT..CASE(.380"L x .300"W x .500"H)..USED WITH NDT784 | 1 | |
| AFS-0551 | CUSTOM TRANSDUCER 5MHz .187"x.187" ELEMENT SIDE MOUNT MICRODOT CONNECTOR WITH A 1.70" RADIUS USED WITH NDT3271..CASE:( .550"L x .300"W x.450"H) | 1 | |
| AFS-0563 | CUSTOM TRANSDUCER 5MHz 41° IN TITANIUM BACKSHOOTER, .187"x.187" ELEMENT SIDE MOUNT MICRODOT CONNECTOR WITH A 1.70" RADIUS. CASE:( .550"L x .260"W x.300"H), USED WITH NDT3271. | 1 | |
| AFS-0564 | CUSTOM TRANSDUCER 5MHz 41° IN TITANIUM, .187"x.187" ELEMENT SIDE MOUNT MICRODOT CONNECTOR WITH A 1.70" RADIUS. CASE:( .550"L x .260"W x.375"H), USED WITH NDT3271. | 1 | |
| AFS-0569 | CUSTOM TRANSDUCER 5MHz 38° REFRACTED IN TITANIUM BACKSHOOTER, .187"x.187" ELEMENT SIDE MOUNT MICRODOT CONNECTOR WITH A 1.70" RADIUS. CASE:( .550"L x .260"W x.325"H), USED WITH NDT3271. | 1 | |
| AFS-0570-1L | CUSTOM ANGLE BEAM TRANSDUCER (LEFT) FOR ( .328" )DIAMETER FASTENER HOLE'S (0.430" ) STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-1R | CUSTOM ANGLE BEAM TRANSDUCER (RIGHT) FOR ( .328" )DIAMETER FASTENER HOLE'S (0.430" ) STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-2L | CUSTOM ANGLE BEAM TRANSDUCER (LEFT) FOR (0.438" & 0.500") DIAMETER FASTENER HOLE'S (0.430" & 0.590") STEPS OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-2R | CUSTOM ANGLE BEAM TRANSDUCER (RIGHT) FOR (0.438" & 0.500") DIAMETER FASTENER HOLE'S (0.430" & 0.590") STEPS OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-3L | CUSTOM ANGLE BEAM TRANSDUCER (LEFT) FOR (0.642") DIAMETER FASTENER HOLE IN (0.570") STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-3R | CUSTOM ANGLE BEAM TRANSDUCER (RIGHT) FOR (0.642") DIAMETER FASTENER HOLE IN (0.570") STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-4L | CUSTOM ANGLE BEAM TRANSDUCER (LEFT) FOR (0.438") DIAMETER FASTENER HOLE (0.710") STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-4R | CUSTOM ANGLE BEAM TRANSDUCER (RIGHT) FOR (0.438") DIAMETER FASTENER HOLE (0.710") STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-5L | CUSTOM ANGLE BEAM TRANSDUCER (LEFT) FOR (0.625") DIAMETER FASTENER HOLE IN (0.850") STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-5R | CUSTOM ANGLE BEAM TRANSDUCER (RIGHT) FOR (0.625") DIAMETER FASTENER HOLE IN (0.850") STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0572-1L | CUSTOM 45° IN STEEL ANGLE BEAM TRANSDUCER (LEFT) FOR ( .307" )DIAMETER FASTENER HOLE'S (0.340" ) STEP OF REFERENCE STANDARD NDT6091. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-1R | CUSTOM 45° IN STEEL ANGLE BEAM TRANSDUCER (RIGHT) FOR ( .307" )DIAMETER FASTENER HOLE'S (0.340" ) STEP OF REFERENCE STANDARD NDT6091. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-2L | CUSTOM 50° IN STEEL ANGLE BEAM TRANSDUCER (LEFT) FOR ( .307" )DIAMETER FASTENER HOLE'S (0.240" ) STEP OF REFERENCE STANDARD NDT6092. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-2R | CUSTOM 50° IN STEEL ANGLE BEAM TRANSDUCER (RIGHT) FOR ( .307" )DIAMETER FASTENER HOLE'S (0.240" ) STEP OF REFERENCE STANDARD NDT6092. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-3L | CUSTOM 60° IN STEEL ANGLE BEAM TRANSDUCER (LEFT) FOR ( .307" )DIAMETER FASTENER HOLE'S (0.200" ) STEP OF REFERENCE STANDARD NDT6092. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-3R | CUSTOM 60° IN STEEL ANGLE BEAM TRANSDUCER (RIGHT) FOR ( .307" )DIAMETER FASTENER HOLE'S (0.200" ) STEP OF REFERENCE STANDARD NDT6092. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-4L | CUSTOM 60° IN STEEL ANGLE BEAM TRANSDUCER (LEFT) FOR ( .412" )DIAMETER FASTENER HOLE'S (0.200" ) STEP OF REFERENCE STANDARD NDT6092. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-4R | CUSTOM 60° IN STEEL ANGLE BEAM TRANSDUCER (RIGHT) FOR ( .412" )DIAMETER FASTENER HOLE'S (0.200" ) STEP OF REFERENCE STANDARD NDT6092. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0576L | CUSTOM 25° "L" - WAVE TRANSDUCER WITH A 2° COMPOUND ANGLE (BACKSHOOTER) 5.0 MHz .25" x .25" ELEMENT WITH A 1.65" RADIUS, LEFT SIDE USED WITH NDT3272 Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0576R | CUSTOM 25° "L" - WAVE TRANSDUCER WITH A 2° COMPOUND ANGLE (BACKSHOOTER) 5.0 MHz .25" x .25" ELEMENT WITH A 1.65" RADIUS, RIGHT SIDE USED WITH NDT3272 Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0581 | CUSTOM BOEING 747 TRANSDUCER 39° IN STEEL WITH A 2.0" RADIUS FINGERTIP RADIUS GRIP ON TOP SURFACE, USED WITH NDT4276.Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0584 | CUSTOM BOEING 747 TRANSDUCER 35° IN STEEL WITH A 2.220" RADIUS FINGERTIP RADIUS GRIP ON TOP SURFACE, USED WITH NDT4279. Includes Test Report and Certificate of Conformance. Reference: 747 Part 4 57-40-08 | 1 | |
| AFS-0591 | CUSTOM BOEING 747 TRANSDUCER 33° IN STEEL WITH A 2.220" RADIUS FINGERTIP RADIUS GRIP ON TOP SURFACE, USED WITH NDT4280. Includes Test Report and Certificate of Conformance. Reference: 747 Part 4 57-40-08 | 1 | |
| AFS-1000A | ULTRASONIC TRANSDUCER 10MHz .100" x .250" ELEMENT, SUPPLIED WITH END MOUNT MICRODOT CONNECTOR. USED WITH NDT1086P-1. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1000B | ULTRASONIC TRANSDUCER 10MHZ .100X.250 ELEMENT, USED WITH NDT1086-P2 | 1 | |
| AFS-1010L | CUSTOM 5MHz SHEAR WAVE(LEFT) TRANSDUCER FOR NDT567, BOEING 757 PT 4 54-50-02 PAGES 1-10. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1010R | CUSTOM 5MHz SHEAR WAVE(RIGHTT) TRANSDUCER FOR NDT567, BOEING 757 PT 4 54-50-02 PAGES 1-10. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1044 | CUSTOM BOEING TRANSDUCER, 5MHz BACK SHOOTER WITH A 1.600" RADIUS AND A MICRODOT CONNECTOR. BOEING 767 PART 4 71-20-01 USED WITH NDT632. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1090 | CUSTOM ANGLE BEAM TRANSDUCER 5MHz WITH A 1.260" RADIUS. USED WITH NDT3144 and NDT3145. Boeing NTM 55-10-16 PT4 | 1 | |
| AFS-1091 | CUSTOM ANGLE BEAM TRANSDUCER 5MHz WITH A 1.30"RADIUS. USED WITH NDT3146. Boeing NTM 55-10-16 PT4 | 1 | |
| AFS-1159 | Panametrics / Olympus NDT Integral Angle Beam Transducer, 45° 5 MHz, .187" square element. .433"x.433"x.236" Stainless Steel case. Includes Test Report ancd Certificate of Conformance. | 1 | |
| AFS-1163 | CUSTOM 5MHz LOW PROFILE TRANSDUCER USED FOR NOTCH'S "A" and "B" ON NDT4116 | 1 | |
| AFS-1164 | CUSTOM 5MHz LOW PROFILE TRANSDUCER USED FOR NOTCH "C" ON NDT4116 | 1 | |
| AFS-1168 | 5MHz ANGLE BEAM TRANSDUCER WITH A RADIUS of 2.0" USED NDT6001. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1169 | 5MHz ANGLE BEAM TRANSDUCER WITH A RADIUS of 2.4" USED NDT6002 | 1 | |
| AFS-1175 | 70°. ANGLE BEAM TRANSDUCER in ALUMINUM, SIDE MOUNT MICRODOT CONNECTOR, .187" x .187" ELEMENT. CASE SIZE: .67'L x .26"W x .33"H. Includes Test Report and Certificate of Conformance. Reference: B767 Part 4 53-50-05. Standard Part number NDT679 | 1 | |
| AFS-1175T | 70°. ANGLE BEAM TRANSDUCER in ALUMINUM, .187" x .187" ELEMENT, TOP MOUNTED MICRODOT CONNECTOR. CASE SIZE: .67'L x .26"W x .33"H. Includes Test Report and Certificate of Conformance. Reference: B767 Part 4 53-50-05. Standard Part number NDT679 | 1 | |
| AFS-1176-1 | CUSTOM 5MHz ANGLE BEAM TRANSDUCER WITH a RADIUS of 2.5" USED NDT6035-1. SIDE MOUNT CONNECTOR. | 1 | |
| AFS-1176-2 | CUSTOM 5MHz ANGLE BEAM TRANSDUCER WITH a RADIUS of 2.22" USED NDT6035-2. SIDE MOUNT. CONNECTOR | 1 | |
| AFS-1177 | CUSTOM 5 MHz ANGLE BEAM TRANSDUCER 35° degrees in ALUMINUM WITH END MOUNTED MICRODOT CONNECTOR. USED WITH NDT6034. | 1 | |
| AFS-1183 | CUSTOM 5 MHz ANGLE BEAM TRANSDUCER 45° degrees in ALUMINUM, WITH END MOUNTED MICRODOT CONNECTOR. USED WITH NDT6034 | 1 | |
| AFS-1184 | CUSTOM LOW PROFILE TRANSDUCER 5MHz 1.75" RADIUS WITH SIDE MOUNT MICRODOT CONNECTOR USED WITH NDT6022. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1186 | CUSTOM 5MHz RADIUS TRANSDUCER SIDE MOUNT CONNECTOR FOR NDT6012 767 JOINT SUPPORT. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1187 | CUSTOM 5MHz RADIUS TRANSDUCER SIDE MOUNT CONNECTOR FOR NDT6013. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1188 | CUSTOM 5MHz, 1.85" RADIUS TRANSDUCER WITH SIDE MOUNT MICRODOT CONNECTOR USED WITH NDT6014. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1189 | CUSTOM 5MHz, 2.20" RADIUS TRANSDUCER WITH SIDE MOUNT MICRODOT CONNECTOR USED WITH NDT6015. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1191-1 | 5MHz ANGLE BEAM TRANSDUCER WITH a RADIUS of 1.2" USED WITH NDT6038. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1191-2 | 5MHz ANGLE BEAM TRANSDUCER WITH a RADIUS of 1.2" USED WITH NDT6038. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1192 | CUSTOM 5MHz 35° TRANSDUCER IN TITANIUM WITH TOP MOUNT MICRODOT CONNECTOR USED WITH WITH NDT6011P & NDT6011 | 1 | |
| AFS-1193 | CUSTOM 5MHz 59° TRANSDUCER IN TITANIUM WITH TOP MOUNT MICRODOT CONNECTOR USED WITH WITH NDT6011P & NDT6011 | 1 | |
| AFS-1194 | CUSTOM 5MHz TRANSDUCER WITH 1.4" RADIUS USED WITH NDT6025-1. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1195 | CUSTOM 5MHz TRANSDUCER WITH 1.65" RADIUS USED WITH NDT6025-. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1196 | CUSTOM 5MHz TRANSDUCER WITH 1.620" RADIUS USED WITH NDT6025-3. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1197 | CUSTOM 5MHz TRANSDUCER WITH 1.4" RADIUS USED WITH NDT6025-4. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1198 | CUSTOM 5MHz TRANSDUCER WITH 1.70" RADIUS USED WITH NDT6025-5. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1199 | CUSTOM 5MHz TRANSDUCER WITH 1.930" RADIUS USED WITH NDT6025-6. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1202L | CUSTOM 5MHz TRANSDUCER COMPOUND ANGLE 45 DEGREES IN STEEL. WITH 3.5 INCH HANDLE. REMOVABLE CABLE MOUNT TO MICRODOT CONNECTOR (LEFT) USED WITH NDT3021, 737 Part 4 57-50-01.Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1202R | CUSTOM 5MHz TRANSDUCER COMPOUND ANGLE 45 DEGREES IN STEEL. WITH 3.5 INCH HANDLE. REMOVABLE CABLE MOUNT TO MICRODOT CONNECTOR (RIGHT) USED WITH NDT3021, 737 Part 4 57-50-01. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1209 | CUSTOM 5MHz, 1.550" RADIUS TRANSDUCER WITH SIDE MOUNT MICRODOT CONNECTOR USED WITH NDT6031-1. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1210 | CUSTOM 5MHz, 1.880" RADIUS TRANSDUCER WITH SIDE MOUNT MICRODOT CONNECTOR USED WITH NDT6031-2. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1211 | CUSTOM 5MHz, 2.00" RADIUS TRANSDUCER WITH SIDE MOUNT MICRODOT CONNECTOR USED WITH NDT6031-3. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1212 | CUSTOM 5MHz L-WAVE, 1.800" RADIUS TRANSDUCER WITH SIDE MOUNT MICRODOT CONNECTOR USED WITH NDT6031-4. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1213 | CUSTOM 5MHz, 1.500" RADIUS TRANSDUCER WITH SIDE MOUNT MICRODOT CONNECTOR USED WITH NDT6032-1. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1214 | USTOM 5MHz, 1.500" RADIUS L-WAVE TRANSDUCER WITH SIDE MOUNT MICRODOT CONNECTOR USED WITH NDT6032-2. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1215 | CUSTOM 5MHz, 1.850" RADIUS TRANSDUCER WITH SIDE MOUNT MICRODOT CONNECTOR USED WITH NDT6032-3. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1216 | CUSTOM 5MHz, 1.850" RADIUS L-WAVE TRANSDUCER WITH SIDE MOUNT MICRODOT CONNECTOR USED WITH NDT6032-4. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1217 | CUSTOM 5MHz L-WAVE TRANSDUCER WITH A RADIUS OF 2.5" WITH END MOUNTED MICRODOT CONNECTOR. USED WITH NDT6033-1 | 1 | |
| AFS-1218 | CUSTOM 5MHz L-WAVE TRANSDUCER WITH A RADIUS OF 2.0" WITH END MOUNTED MICRODOT CONNECTOR USED WITH NDT6033-2 | 1 | |
| AFS-1326L-I | CUSTOM 45 DEGREE IN ALUMINUM 5MHz (LEFT -INBOARD) TRANSDUCER WITH YOKE USED WITH NDT768 | 1 | |
| AFS-1326L-O | CUSTOM 65 DEGREE IN ALUMINUM 5MHz (LEFT -OUTBOARD) TRANSDUCER WITH YOKE USED WITH NDT768 | 1 | |
| AFS-1326R-I | CUSTOM 45 DEGREE IN ALUMINUM 5MHz (RIGHT -INBOARD) TRANSDUCER WITH YOKE USED WITH NDT769 | 1 | |
| AFS-1326R-O | CUSTOM 65 DEGREE IN ALUMINUM 5MHz (RIGHT -OUTBOARD) TRANSDUCER WITH YOKE USED WITH NDT769 | 1 | |
| AFS-1327L-I | CUSTOM 45 DEGREE IN ALUMINUM 5MHz (LEFT -INBOARD) TRANSDUCER WITH YOKE USED WITH NDT771 | 1 | |
| AFS-1327L-O | CUSTOM 45 DEGREE IN ALUMINUM 5MHz (LEFT -OUTBOARD) TRANSDUCER WITH YOKE USED WITH NDT771 | 1 | |
| AFS-1327R-I | CUSTOM 45 DEGREE IN ALUMINUM 5MHz (RIGHT -INBOARD) TRANSDUCER WITH YOKE USED WITH NDT774 | 1 | |
| AFS-1327R-O | CUSTOM 45 DEGREE IN ALUMINUM 5MHz (RIGHT -OUTBOARD) TRANSDUCER WITH YOKE USED WITH NDT774 | 1 | |
| AFS-1377-1 | B777 10 MHz custom L-Wave transducer with a side mount microdot connector,.900"radius 9.0° degrees incident angle. Used on NDT780-A. Includes Test Report and Certificate of Conformance. 777 PART 4 57-50-01 | 1 | |
| AFS-1377-2 | B777 10 MHz custom L-Wave transducer with a side mount microdot connector, .800" radius 7°degrees incident angle. Used on NDT780-B. Includes Test Report and Certificate of Conformance. 777 PART 4 57-50-01 | 1 | |
| AFS-1377-3 | B777 10 MHz custom L-Wave transducer with a side mount microdot connector, 1.05" radius 6.5° degree incident angle. Used on NDT780-C. Includes Test Report and Certificate of Conformance. 777 PART 4 57-50-01. | 1 | |
| AFS-1377-4 | B777 10 MHz custom L-Wave transducer with a side mount connector, .900" radius 10° degree incident angle. Used on NDT780-D. Includes Test Report and Certificate of Conformance. 777 PART 4 57-50-01 | 1 | |
| AFS-1377-5 | B777 10 MHz custom L-Wave transducer with a side mount microdot connector, .800" radius 7° degree incident angle. Used on NDT780-E. Includes Test Report and Certificate of Conformance. 777 PART 4 57-50-01 | 1 | |
| AFS-1377-6 | B777 10 MHz custom L-Wave transducer 8° degree incident angle with a side mount microdot connector,1.05" radius used on NDT780-F. Includes Test Report and Certificate of Conformance. 777 PART 4 57-50-01 | 1 | |
| AFS-1384 | 5MHZ, 2 x .25" SQUARE ELEMENT PAINTBRUSH TRANSDUCER USED WITH NDT3023, 737 PART 4 32-10-03 PAGE 7 FIGURE 3. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1391 | CUSTOM 36 DEGREE 5MHz SHEARWAVE PAINTBRUSH TRANSDUCER W/1.61"RADIUS, .375"H x .500"W MAX USED WITH NDT615, 767 PT 4 53-80-01. Includes Test Report and Certificate of Conformance. D | 1 | |
| AFS-503 | CUSTOM 5MHZ, 10 DEGREES INCIDENT TRANSDUCER FOR THE FORWARD SIDE OF THE LOWER ROW FASTENER HOLE AS WELL AS THE AFT SIDE OF THE AFT UPPER ROW FASTENER HOLE OF NDT3219. CASE SIZE:(.550'Lx.350'Wx.400"H) WITH 1.65" RADIUS. Inc ludes Test Report and Certif... | 1 | |
| AFS-504 | CUSTOM 5MHZ TRANSDUCER FOR AFT SIDE OF THE LOWER FASTENER HOLE OF NDT3219. CASE SIZE:(.550'Lx.350'Wx.400"H) WITH 1.65" RADIUS. Includes Test Report and Certificate of Conformance. Reference: 737 part 4 57-10-19 page 1 | 1 | |
| AFS-5050-1 | Custom 5 MHz, 22° .187" x .187" element, L- Wave Transducer with a 1.400" Radius used with NDT6025-1. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-5050-2 | Custom 5 MHz, 20° .187" x .187" element, L- Wave Transducer with a 1.650" Radius used with NDT6025-2. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-5050-3 | Custom 5 MHz, 24° .187" x .187" element, L- Wave Transducer with a 1.620" Radius used with NDT6025-3. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-5050-4 | Custom 5 MHz, 24° .187" x .187" element, L- Wave Transducer with a 1.400" Radius used with NDT6025-4. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-5050-5 | Custom 5 MHz, 24° .187" x .187" element, L- Wave Transducer with a 1.700" Radius used with NDT6025-5. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-5050-6 | Custom 5 MHz, 18° .187" x .187" element, L- Wave Transducer with a 1.930" Radius used with NDT6025-6. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-523AT-R1.0 | OLYMPUS NDT Subminiture Angle Beam Transducer 5MHz, 23° in aluminum with a 1.0" Radius, Supplied with an Top Mount Microdot Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-5825 | Custom 5MHz 22° shear wave transducer .375" element. 1.90"(51mm) radius. Case Size: .75"L x .50"W x .25"H. Used with reference standard NDT3195. | 1 | |
| AFS-5826 | Custpm 5MHz 31° shear wave transducer .375" element. 2.0"(51mm) radius. Case Size: ..75"L x .50"W x .25"H end mounted microdot connector. Used with reference standard NDT3196. | 1 | |
| AFS-5827 | Custpm 5MHz 33° shear wave transducer .375" element. 2.0"(51mm) radius. Case Size: ..75"L x .50"W x .25"H end mounted microdot connector. Used with reference standard NDT3197. | 1 | |
| AFS-5828 | Custpm 5MHz 26° shear wave transducer .375" element. 2.0"(51mm) radius. Case Size: ..75"L x .50"W x .25"H end mounted microdot connector. Used with reference standard NDT3197. | 1 | |
| AFS-6011P | BOEING 767 TRANSDUCER POSITIONER USED WITH TEK5046-1, TEK5046-2 and NDT6011. | 1 | |
| AFS-766-3 | CUSTOM 5MHz ANGLE BEAM TRANSDUCER .25" x .25" ELEMENT. USED WITH NDT766 Outboard Flange of the T-Chord/Upper Surface. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-766/767-4 | CUSTOM 5MHz ANGLE BEAM TRANSDUCER .25" x .25" ELEMENT. USED WITH NDT766 Outboard Flange of the T-Chord/Lower Surface. Includes Test Report and Certificate of Conformance.REFERENCE: 777 PART 4 57-10-02 | 1 | |
| AFS-767-3 | CUSTOM 5MHz ANGLE BEAM TRANSDUCER .25" x .25" ELEMENT. USED WITH NDT766 Inboard Flange of the T-Chord/Upper Surface. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-767-5 | CUSTOM 5MHz ANGLE BEAM TRANSDUCER .25" x .25" ELEMENT. USED WITH NDT766 Inboard Flange of the T-Chord/Lower Surface. Includes Test Report and Certificate of Conformance. | 1 | |
| AFX-535AT | TRANSDUCER - AEROFAB NDT (35 DEG) | 1 | |
| AFX-545AT | TRANSDUCER-AEROFAB NDT | 2 | |
| D11 | SEARCH UNIT 15MHZ, 0° DEGREE STRAIGHT BEAM TRANSDUCER, SIDE MICRODOT CONNECTOR. .670"(17.0MM) HX .394"(10MM)Ø, HIGH DAMPED (AEROFAB NDT LLC) | 1 | |
| D7906-RM | DUAL TRANSDUCER. COMPATIBLE WITH THRU-COAT FUNCTION ON OLYMPUS NDT CORROSION THICKNESS GAUGES. 5.0 M | 1 | |
| D7906-SM | DUAL TRANSDUCER. COMPATIBLE WITH THRU-COAT FUNCTION ON OLYMPUS NDT CORROSION THICKNESS GAUGES. 5.0 M | 1 | |
| MA-605S | TRANSDUCER (NDT) | 2 | |
| MFLX6 | TRANSDUCER ADAPTER (NDT) | 2 | |
| NDT-3023P2 | ULTRASONIC TRANSDUCER POSITIONER (NDT) | 4 | |
| NDT-3023P3 | ULTRASONIC TRANSDUCER POSITIONER (NDT) | 4 | |
| NDT3020P1 | NDT TRANSDUCER POSIONER | 2 | |
| NDT3023P1 | Transducer Positioner for NDT3023 | 4 | |
| NDT3023P2 | Transducer Positioner for NDT3023 | 4 | |
| NDT3023P3 | Transducer Positioner for NDT3023 | 4 | |
| NDT6045-SC1 | Boeing Transducer Guide. Material: Delrin ( Black Acetal). Used with NDT6045 Reference Standard. 767 PART 4 54-50-08 PAGE 15 FIGURE 3 | 1 | |
| NDT6045-SC2 | Boeing Transducer Guide. Material: Delrin ( Black Acetal). Used with NDT6045 Reference Standard. 767 PART 4 54-50-08 PAGE 15 FIGURE 3 | 1 | |
| NDT6048P | TRANSDUCER POSITIONER FOR NDT6048 | 1 | |
| NDT6089-G1 | BOEING TRANSDUCER GUIDE FOR NDT6090 BAT #3. MATERIAL: ACETAL(DELRIN) 767 PART 4 54-50-15 PAGE 28 FIGURE 8 | 1 | |
| NDT6089-G2 | BOEING TRANSDUCER GUIDE FOR NDT6089 BAT #1. MATERIAL: ACETAL(DELRIN) | 1 | |
| NDT6089-G3 | BOEING TRANSDUCER GUIDE FOR NDT6090 BAT #3. MATERIAL: ACETAL(DELRIN) 767 PART 4 54-50-15 PAGE 28 FIGURE 8 | 1 | |
| NDT6089-G4 | BOEING TRANSDUCER GUIDE FOR NDT6090 BAT #3. MATERIAL: ACETAL(DELRIN) 767 PART 4 54-50-15 PAGE 28 FIGURE 8 | 1 | |
| NDT6089-G5 | BOEING TRANSDUCER GUIDE FOR NDT6090 BAT #3. MATERIAL: ACETAL(DELRIN) 767 PART 4 54-50-15 PAGE 28 FIGURE 8 | 1 | |
| NDT6089-G6 | BOEING TRANSDUCER GUIDE FOR NDT6090 BAT #3. MATERIAL: ACETAL(DELRIN) 767 PART 4 54-50-15 PAGE 28 FIGURE 8 | 1 | |
| NDT6090-G1 | BOEING TRANSDUCER GUIDE FOR NDT6090 BAT #3. MATERIAL: ACETAL(DELRIN) 767 PART 4 54-50-15 PAGE 28 FIGURE 8 | 1 | |
| NDT6090-G2 | BOEING TRANSDUCER GUIDE FOR NDT6090 BAT #3. MATERIAL: ACETAL(DELRIN) 767 PART 4 54-50-15 PAGE 28 FIGURE 8 | 1 | |
| NDT6091G1 | NDT6091 REFERENCE STANDARD TRANSDUCER GUIDE. MATERIAL: DELRIN(ACETAL) 767 PART 4 54-50-14 PAGE 26 FIGURE 2. | 1 | |
| NDT6091G2 | NDT6091 REFERENCE STANDARD TRANSDUCER GUIDE. MATERIAL: DELRIN(ACETAL) 767 PART 4 54-50-14 PAGE 26 FIGURE 2. | 1 | |
| NDT6092G1 | NDT6092 REFERENCE STANDARD TRANSDUCER GUIDE. MATERIAL: DELRIN(ACETAL) 767 PART 4 54-50-14 PAGE 27 FIGURE 3 | 1 | |
| NDT6092G2 | NDT6092 REFERENCE STANDARD TRANSDUCER GUIDE. MATERIAL: DELRIN(ACETAL) 767 PART 4 54-50-14 PAGE 27 FIGURE 3 | 1 | |
| NDT690-P1 | TRANSDUCER POSITIONER NDT | 3 | |
| NDT690-P2 | TRANSDUCER POSITIONER NDT | 3 | |
| NDT690-P3 | TRANSDUCER POSITIONER NDT | 3 | |
| NDT7001P | BOEING LUCITE WEDGE WITH A .315"Ø FLAT BOTTOM HOLE, 2.010" RADIUS FOR A .25"Ø STRAIGHT BEAM TRANSDUCER. USED WITH REFERENCE STANDARD NDT7001. | 1 | |
| NDT7029P | TRANSDUCER POSITIONER NDT | 1 | |
| NDT727G | CUSTOM TRANSDUCER COMPOUND ANGLE 45 DEGREES IN STEEL. WITH 3.5 INCH HANDLE. REMOVABLE CABLE MOUNT TO MICRODOT CONNECTOR (LEFT) USED WITH NDT3021, Part 4 57-50-01 | 2 | |
| NDT728 | CUSTOM TRANSDUCER COMPOUND ANGLE 45 DEGREES IN STEEL. WITH 3.5 INCH HANDLE. REMOVABLE CABLE MOUNT TO MICRODOT CONNECTOR (RIGHT) USED WITH NDT3021, Part 4 57-50-01 | 2 | |
| NDT773-G1 | TRANSDUCER GUIDE THE TRANSDUCER GUIDE IS USED WITH REFERENCE STANDARD NDT773 ONLY | 2 | |
| NDT815-G1 | DELRIN TRANSDUCER GUIDE FOR REFERENCE STANDARD NDT815 | 1 | |
| NDT815-G2 | DELRIN TRANSDUCER GUIDE FOR REFERENCE STANDARD NDT815. | 1 | |
| NDT815-G3 | DELRIN TRANSDUCER GUIDE FOR REFERENCE STANDARD NDT815. | 1 | |
| NDT815-G4 | DELRIN TRANSDUCER GUIDE FOR REFERENCE STANDARD NDT815 | 1 | |
| NDT815-G5 | DELRIN TRANSDUCER GUIDE FOR REFERENCE STANDARD NDT815 | 1 | |
| NDT815-G6 | DELRIN TRANSDUCER GUIDE FOR REFERENCE STANDARD NDT815 | 1 | |
| P6020A | NDT TRANSDUCER POSITIONER | 3 | |
| P6020B | NDT TRANSDUCER POSITIONER | 3 | |
| P6021A | NDT TRANSDUCER POSITIONER | 3 | |
| P6021B | NDT TRANSDUCER POSITIONER | 3 | |
| P6021C | NDT TRANSDUCER POSITIONER | 3 | |
| PAB-1004-60-AL-RM | UT Transducer 10MHz, 60 degree Al, side connector (NDT) | 1 | |
| SA-455T | SPECIAL UT TRANSDUCER, 5 MHZ, 45 DEGREE HAS A CASE 0.25 TO 0.26 INCHES WIDE AND MAXIMUM CASE LENGTH OF 0.50 INCHES, TOP MOUNTED, CAN FIT INTO TRANSDUCER POSITIONER NDT6048P. | 1 | |
| SP0-6283 | TRANSDUCER NDT | 1 | |
| SUC 706 | NDT ENGINEERING. COPR./OLYMPUS NDT 5MHZ LONGITUDINAL (STRAIGHT BEAM) TRANSDUCER, 2.5” Ø ELEMENT .375” Ø CASE,.700” TALL, SUPPLIED WITH A SIDE MOUNTED MICRODOT CONNECTOR, INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE | 1 | |
| SUC-168 | TRANSDUCER NDT | 1 | |
| SUC166-8T | UT Transducer, 5MHz, 6mm element diam, gamma, 10mm diam, 13 mm long (NDT) | 3 | |
| SUS 921L | ULTRASONIC TRANSDUCER LH FOR NDT3021 | 2 | |
| SUS 921R | ULTRASONIC TRANSDUCER RH FOR NDT3021 | 2 | |
| SUS-1015 | TRANSDUCER (NDT) | 1 | |
| SUS-1033 | NDT ULTRASONIC TRANSDUCER SUS-1033 | 1 | |
| SUS674-T1 | TRANSDUCER FOR NDT674 | 1 | |
| SUS674-T2 | TRANSDUCER FOR NDT674 | 1 | |
| SUS675-T1 | TRANSDUCER FOR NDT675 | 1 | |
| SUS675-T2 | TRANSDUCER FOR NDT675 | 1 | |
| SUS921L | TRANSDUCER (NDT) | 2 | |
| SUS921R | TRANSDUCER (NDT) | 2 | |
| SUSM 523AT-R1.0 | OLYMPUS NDT SUBMINITURE ANGLE BEAM TRANSDUCER 5MHZ, 23° IN ALUMINUM WITH A 1.0" RADIUS, SUPPLIED WITH AN TOP MOUNT MICRODOT CONNECTOR. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| SX535AT | Transducer NDTENG | 1 | |
| TC7 | UT TRANSDUCER, 5MHZ, 6MM ELEMENT DIAM, GAMMA, 10MM DIAM, 13 MM LONG (NDT) | 1 | |
| TC7-255S | NDT ENGINEERING. COPR./OLYMPUS NDT 5MHZ LONGITUDINAL (STRAIGHT BEAM) TRANSDUCER, 2.5” Ø ELEMENT .375” Ø CASE,.700” TALL, SUPPLIED WITH A SIDE MOUNTED MICRODOT CONNECTOR, INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE | 1 | |
| TC8-1210H | Transducer, 10MHz, .125", .190"OD x .8" Long, Hardwired (ORDER FROM UTX), NDT690, NDT689, NDT687 | 1 | |
| TEK-0524 | SPECIAL 5MHZ TRANSDUCER (B737 NDTM PT.4, 55-10-23) | 1 | |
| TEK-0569 | CUSTOM TRANSDUCER 5MHZ 38° REFRACTED IN TITANIUM BACKSHOOTER, .187"X.187" ELEMENT SIDE MOUNT MICRODOT CONNECTOR WITH A 1.70" RADIUS. CASE:( .550"L X .260"W X.325"H), USED WITH NDT3271. | 1 | |
| TEK-0576L | CUSTOM 25° "L" - WAVE TRANSDUCER WITH A 2° COMPOUND ANGLE (BACKSHOOTER) 5.0 MHZ .25" X .25" ELEMENT WITH A 1.65" RADIUS, LEFT SIDE USED WITH NDT3272 INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| TEK-0576R | CUSTOM 25° "L" - WAVE TRANSDUCER WITH A 2° COMPOUND ANGLE (BACKSHOOTER) 5.0 MHZ .25" X .25" ELEMENT WITH A 1.65" RADIUS, RIGHT SIDE USED WITH NDT3272 INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| TEK-5000 | Transducer used with NDT1086-P2 Positioner | 1 | |
| TEK-5000-1 | Special Transducer, Scribe Line Inspection used with NDT1086-P1 | 1 | |
| TEK-5023 | Special Transducer, 5MHz, .25", Radiused for NDT6001 | 1 | |
| TEK-5024 | Special Transducer, 5MHz, .25", Radiused for NDT6002 | 1 | |
| TEK-5037 | TRANSDUCER TECNA NDT | 1 | |
| TEK-5038-12 | Transducer, 5 mhz, .250", shear wave w/radius used on NDT6012 | 1 | |
| TEK-5038-13 | Transducer, 5 mhz, .250", shear wave w/radius used on NDT6013 | 1 | |
| TEK-5038-14 | Transducer, 5 mhz, .250", shear wave w/radius used on NDT6014 | 1 | |
| TEK-5038-15 | Transducer, 5 mhz, .250", shear wave w/radius used on NDT6015 | 1 | |
| TEK-5048-1 | Transducer w/radius used on NDT6035-1 | 1 | |
| TEK-5048-2 | Transducer w/radius used on NDT6035-2 | 1 | |
| TEK-5050-1 | Transducer for NDT6025-1 | 1 | |
| TEK-5050-2 | Transducer for NDT6025-2 | 1 | |
| TEK-5050-3 | Transducer for NDT6025-3 | 1 | |
| TEK-5050-4 | Transducer for NDT6025-4 | 1 | |
| TEK-5050-5 | Transducer for NDT6025-5 | 1 | |
| TEK-5050-6 | Transducer for NDT6025-6 | 1 | |
| TEK-5050-767 | Transducer Kit includes TEK-5050-1 Thru -6 for NDT6025-1 thru -6 standards | 1 | |
| TEK-5051/674T1 | TRANSDUCER FOR NDT674 | 1 | |
| TEK-5051/674T2 | TRANSDUCER FOR NDT674 | 1 | |
| TEK-5051/675T1 | TRANSDUCER FOR NDT675 | 1 | |
| TEK-5051/675T2 | TRANSDUCER FOR NDT675 | 1 | |
| TEK-5053-017 | 5 MHz Transducer for NDT6017 | 1 | |
| TEK-5053-018 | 5 MHz Transducer for NDT6018 | 1 | |
| TEK-5053-17 | 5 MHZ TRANSDUCER FOR NDT6017 | 1 | |
| TEK-5053-18 | 5 MHZ TRANSDUCER FOR NDT6018 | 1 | |
| TEK-5059L | Special Transducer, 757 used with NDT567 and NDT 567P | 1 | |
| TEK-5059L/MCX | Special Transducer, 757 used with NDT567 and NDT 567P with MCX connector | 1 | |
| TEK-5059R | Special Transducer, 757 used with NDT567 and NDT 567P | 1 | |
| TEK-5059R/MCX | Special Transducer, 757 used with NDT567 and NDT 567P, w/MCX connector | 1 | |
| TEK-5063L | ULTRASONIC TRANSDUCER LH FOR NDT3021 | 1 | |
| TEK-5063R | ULTRASONIC TRANSDUCER RH FOR NDT3021 | 1 | |
| TEK-5076-1 | Special Transducer, 1.55R for NDT6031-1 | 1 | |
| TEK-5076-2 | Special Transducer, 1.80R for NDT6031-2 | 1 | |
| TEK-5076-3 | Special Transducer, 2.00R for NDT6031-3 | 1 | |
| TEK-5076-4 | Special Transducer, 1.80R for NDT6031-4 | 1 | |
| TEK-5077-1 | Special Transducer, 1.50R for NDT6032-1 | 1 | |
| TEK-5077-2 | Special Transducer, 1.50R for NDT6032-2 | 1 | |
| TEK-5077-3 | Special Transducer, 1.85R for NDT6032-3 | 1 | |
| TEK-5077-4 | Special Transducer, 1.85R for NDT6032-4 | 1 | |
| TEK-5078-1 | Special Transducer, 2.50R for NDT6033-1 | 1 | |
| TEK-5078-2 | Special Transducer, 2.00R for NDT6033-2 | 1 | |
| TEK-5510L-I | Transducer, Inboard, for NDT768 | 1 | |
| TEK-5510L-O | Transducer, Outboard, for NDT768 | 1 | |
| TEK-5510R-I | Transducer, Inboard, for NDT769 | 1 | |
| TEK-5510R-O | Transducer, Outboard, for NDT769 | 1 | |
| TEK-5828-1 | Transducer 10 MHz 7.5.. deg Incident Angle shoe radius 0.9 L-wave, rear mount, NDT780-A | 1 | |
| TEK-5828-2 | Transducer 10MHz 8.5 deg Incident Angle shoe radius .8 L-wave rear mount, NDT780-B | 1 | |
| TEK-5828-3 | Transducer 10 MHz 6.5 deg incident angle shoe radius 1.05 L-Wave rear mount, NDT780-C | 1 | |
| TEK-5828-4 | Transducer 10 MHz 9 deg Incident Angle 0.9 shoe radius L wave, rear mount, NDT780-D | 1 | |
| TEK-5828-5 | transducer 10 MHz 10.5 deg incident angle .8 deg radius L-wave, rear mount, NDT780-E | 1 | |
| TEK-5828-6 | transducer 10 MHz 8.0 deg incident angle 1.05R deg radius L-wave, rear mount, NDT780-F | 1 | |
| TEK-6011P | TRANSDUCER POSITIONER FOR NDT6011 | 1 | |
| TEK-9015L | Transducer to be used with NDT6052, Boeing 767 | 1 | |
| TEK-9015R | Transducer to be used with NDT6052, Boeing 767 | 1 | |
| TEK-9087L | 5 MHZ SURFACEWAVE TRANSDUCER, REFERENCE STANDARD NDT3310, LEFT SOUND DIRECTION | 1 | |
| TEK-9087R | 5 MHZ SURFACEWAVE TRANSDUCER, REFERENCE STANDARD NDT3310, RIGHT SOUND DIRECTION | 1 | |
| TEKIT-5006/5007 | Transducer Assembly & Manipulating Fixture Set, Includes all items per 767 PT4 57-50-05 PG9 FIG4, TEK-5006,TEK-5006-C1,TEK-5006-C2, TEK-5007, TEK-5007-C1, Manipulating Rod, Syringe, Cable, Couplant & 1450 Pelican Case *Does not include NDT694 & NDT695 | 1 | |
| TEKIT-5050-767 | TRANSDUCER KIT INCLUDES TEK-5050-1 THRU -6 FOR NDT6025-1 THRU -6 STANDARDS | 1 | |
| U8557028 | ULTRASONIC TRANSDUCER SUC-706 (NDT) | 1 | |
| U8557031 | ULTRASONIC TRANSDUCER SUC-726T (NDT) | 1 | |
| XA-455T | ULTRASONIC TRANSDUCER X SMALL ANGLE BEAM TRANSDUCER 5MHZ,45 DEGREE IN ALUMINUM, TOP MICRODOT TECHNA NDT | 2 | |
| XA-605T | TRANSDUCER - ANGLE BEAM, 5.0 MHZ, 0.375 IN. (9.53 MM) H X 0.375 IN. (9.53 MM) L X 0.260 IN. (6.60 MM) W; 60 DEGREES REFRACTED ANGLE IN ALUMINUM, TOP MICRODOT CONNECTOR (TECHNA NDT OR EQUIVALENT). | 1 | |
| XA-705S | TRANSDUCER (NDTM PART 4 53-20-02) | 3 | |
| XA-705T | MINIATURE INTEGRAL ANGLE BEAM TRANSDUCER, 5.0 MHZ, 0.375 IN. (9.53 MM) H X 0.375 IN. (9.53 MM) L X 0.260 IN. (6.6 MM) W; 70 DEGREES REFRACTED ANGLE IN ALUMINUM, TOP MICRODOT CONNECTOR, (TECHNA NDT OR EQUIVALENT) | 1 | |
| XS-455S | TRANSDUCER - ANGLE BEAM, 5.0 MHZ, 0.354 IN. (9.0 MM) LONG X 0.236 IN. (6.0 MM) WIDE, 45 DEGREE REFRACTED ANGLE IN STEEL, SIDE MICRODOT CONNECTOR (TECHNA NDT OR EQUIVALENT) | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
