| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 10RS.39 | NDT STANDARD | 1 | |
| 53-10-110A | NDT STANDARD | 2 | |
| 80RS.22 | NDT STANDARD | 3 | |
| 80RS06 | NDT STANDARD | 1 | |
| 80RS07 | NDT STANDARD | 2 | |
| 80RS22 | NDT STANDARD | 3 | |
| 80RS8 | NDT STANDARD | 1 | |
| 98S53005020-200 | NDT STANDARD | 2 | |
| 98S53005020-202 | NDT STANDARD | 2 | |
| 98S53005021000 | NDT STANDARD | 3 | |
| 9RST1 | NDT STANDARD | 1 | |
| AGE-04982-401 | NDT STANDARD | 1 | |
| AGE-05697-401 | NDT STANDARD | 3 | |
| ANDT1051 | NDT STANDARD | 4 | |
| EXBC100-59019-001 | NDT STANDARD | 1 | |
| NDT1027-0.188 | NDT STANDARD | 2 | |
| NDT1089-0.188 | NDT STANDARD | 2 | |
| NDT6000-EC | NDT STANDARD | 2 | |
| NDT6000X | NDT STANDARD | 1 | |
| NDT6060 | NDT STANDARD | 3 | |
| NDT6061 | NDT STANDARD | 3 | |
| NDT6063 | NDT STANDARD | 3 | |
| RS15 | NDT STANDARD | 1 | |
| SB10550016-147 | NDT STANDARD | 1 | |
| ST8870-1 | NDT STANDARD | 4 | |
| ST8870-4 | NDT STANDARD | 4 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 98S53005021000 | STANDARD NDT | 1 | |
| (CALIB) 98S57105006200 | CALIBRE STANDARD NDT | 1 | |
| (CALIB) 98S57105009200 | CALIBRE STANDARD NDT | 1 | |
| (CALIB) 98S57105015200 | CALIBRE STANDARD NDT-9941A3 | 1 | |
| (CALIB) 98S57205030001 | NDT CALIBRATION STANDARD (CALIBRATION) | 1 | |
| 10L16-4.96X2-A00-P-2.5-OM | STANDARD PHASED-ARRAY PROBE, 10 MHZ LINEAR ARRAY, 16 ELEMENTS, 0.012 IN. (0.31MM) PITCH (OLYMPUS NDT OR EQUIVALENT) | 1 | |
| 10L16-A00 | STANDARD PHASED-ARRAY PROBE, 10 MHZ LINEAR ARRAY, 16 ELEMENTS, 0.012 IN. (0.31MM) PITCH (OLYMPUS NDT OR EQUIVALENT) | 1 | |
| 113-126-660 | STANDARD REFERENCE : NDT3322A | 1 | |
| 1159SST261 | CALIBRATION STANDARD (NDT) | 1 | |
| 118-440-050 | STANDARD REFERENCE : NDT3322A | 1 | |
| 130C | Boeing Standard, ALL PT6 53-50-00:PG13 FIG1 DETAIL VI (same as NDT706P) | 2 | |
| 145-15998-001 | REFERENCE NDT STANDARD | 4 | |
| 171T17969-401 | EMBRAER 190/195 REFERENCE STANDARD PT 4 53-10-00 PAGES 1-12 EMBRAER 190-NDT 2824, 270-801-B. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| 194 | REFERENCE STANDARD NDT | 9 | |
| 194B | REFERENCE STANDARD NDT | 1 | |
| 2-164-551 | AIRBUS CALIBRATION STANDARD, A350-A-51-90-01-01001-040A-A-NDT & 51-63-01-991-001-A PT 6 FIG 601, 2024-T351 ALUMINUM. 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05-0.25mm WIDE). Includes Test Report and Certificate of Conformance. | 2 | |
| 2-887-01-9313S | NDT REFERENCE STANDARD | 6 | |
| 2-887-01-9314S | NDT REFERENCE STANDARD | 5 | |
| 2-887-01-9315S | NDT REFERENCE STANDARD | 4 | |
| 2-887-01-9316S | NDT REFERENCE STANDARD | 3 | |
| 2214E | NDT REFERENCE STANDARD | 1 | |
| 29A029 | AIRBUS CALIBRATION STANDARD, A350-A-51-90-01-01001-040A-A-NDT & 51-63-01-991-001-A PT 6 FIG 601, 2024-T351 ALUMINUM. 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05-0.25mm WIDE). Includes Test Report and Certificate of Conformance. | 5 | |
| 29A029YS | AIRBUS CALIBRATION STANDARD, A318/A319/A320/A321 51-63-01-991-001-A PB 1 FIG 60 & A350-A-51-90-01-01001-040A-A-NDT 1, 2024-T351 ALUMINUM. 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x 0.13mm(.0051") WIDE. Includes Test Report and Certificate of Conformance. | 1 | |
| 29A049 | AIRBUS CALIBRATION STANDARD, A350-A-51-90-01-01001-040A-A-NDT & 51-63-01-991-001-A PT 6 FIG 601, 304 stainless steel.. 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05-0.25mm WIDE). Includes Test Report and Certificate of Conformance. | 2 | |
| 3171 | Reference Standard NDT3171 | 1 | |
| 55-31NDT1 | NDT REFERENCE STANDARD | 1 | |
| 550T10483-401 | REFERENCE STANDARD, NDT | 1 | |
| 57-12-501 | RIGHT AND LEFT WING REAR BEAM AT BL 35.8 — EDDY CURRENT INSPECTION CALIBRATION STANDARD, 1159W40007-1NDT (GULFSTREAM) | 1 | |
| 57-12-502 | RIGHT AND LEFT WING REAR BEAM AT RBS 103.3 — EDDY CURRENT INSPECTION PROBE :SPO 5053 PROBE :SPO 5054 CALIBRATION STANDARD, 1159W40005-1NDT (GULFSTREAM | 1 | |
| 57-12-504 | RIGHT AND LEFT WING REAR BEAM AT RBS 230.1 — EDDY CURRENT INSPECTION CALIBRATION STANDARD, 1159W40063-1NDT (GULFSTREAM | 1 | |
| 57-20-151-152A153A1 | NDT REFRENCE STANDARD | 1 | |
| 57-20-151-152A153A2 | NDT REFERENCE STANDARD | 1 | |
| 5L16-A00 | STANDARD PHASED-ARRAY PROBE, 5 MHZ LINEAR ARRAY, 16 ELEMENTS, 0.012 IN. (0.31 MM) PITCH (OLYMPUS NDT OR EQUIVALENT) | 1 | |
| 98A54003072000 | NDT CALIBRATION STANDARD | 2 | |
| 98A54003098000 | NDT REF STANDARD BLOCK TOOL | 1 | |
| 98A57103016001 | A300 NDT REF STANDARD TOOL | 2 | |
| 98S51605000-202 | ATR NDT REFERENCE STANDARD | 1 | |
| 98S51605000-204 | ATR NDT REFERENCE STANDARD | 1 | |
| 98S51605000-206 | ATR NDT REFERENCE STANDARD | 1 | |
| 98S51605000-208 | ATR NDT REFERENCE STANDARD | 1 | |
| 98S51605000-210 | ATR NDT REFERENCE STANDARD | 1 | |
| 98S51605001-212 | ATR NDT REFERENCE STANDARD | 4 | |
| 98S51605001-218 | ATR NDT REFERENCE STANDARD | 3 | |
| 98S51605002200 | NDT CALIBRATION STANDARD | 1 | |
| 98S53005021000 | STANDARD NDT | 3 | |
| 98S54005020200 | NDT CALIBRATION STANDARD | 1 | |
| 98S54005020202 | NDT CALIBRATION STANDARD | 1 | |
| 98S54005020204 | NDT CALIBRATION STANDARD | 1 | |
| 98S54005020206 | NDT CALIBRATION STANDARD | 1 | |
| 98S54005020208 | NDT CALIBRATION STANDARD | 1 | |
| 98S54005020210 | NDT CALIBRATION STANDARD | 1 | |
| 98S54005020212 | NDT CALIBRATION STANDARD | 1 | |
| 98S54005020214 | NDT CALIBRATION STANDARD | 1 | |
| 98S54005020216 | NDT CALIBRATION STANDARD | 1 | |
| 98S54305002-200 | ATR NDT REFERENCE STANDARD | 5 | |
| 98S57105004-200 | ATR NDT REFERENCE STANDARD | 4 | |
| 98S57105006-200 | ATR NDT REFERENCE STANDARD | 3 | |
| 98S57105010201 | CALIBRATION TOOL STANDARD NDT | 1 | |
| 98S57105013004 | CALIBRATION TOOL STANDARD NDT | 1 | |
| 98S57105014001 | CALIBRATION TOOL STANDARD NDT | 2 | |
| 98S57105014002 | CALIBRATION TOOL STANDARD NDT | 2 | |
| 98S57105014003 | CALIBRATION TOOL STANDARD NDT | 2 | |
| 98S57105015-200 | ATR NDT REFERENCE STANDARD | 3 | |
| 98S57105019000 | CALIBRATION TOOL STANDARD NDT | 1 | |
| 98S57105032-200 | ATR NDT REFERENCE STANDARD | 3 | |
| 98S57105032-202 | ATR NDT REFERENCE STANDARD | 3 | |
| 98S57205030001 | NDT CALIBRATION STANDARD | 4 | |
| 99A-510-03000-000 | Calibration Standard NDT | 2 | |
| 99A14145-101 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| 99A14145−101 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| 99A52103001000 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 1 | |
| 99A53003001101 | AIRBUS REFERENCE STANDARD (NDT) | 8 | |
| 99A53003001103 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 4 | |
| 99A53003001104 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 4 | |
| 99A53003001105 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 4 | |
| 99A53003001108 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 4 | |
| 99A53107287000 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 7 | |
| 99A53803024000 | NDT REF STANDARD TOOL | 1 | |
| 99A5440302000 | NDT REF STANDARD BLOCK TOOL | 1 | |
| 99A57103030000 | A300 NDT REF STANDARD TOOL | 4 | |
| 99A57103041000 | NDT REFERENCE STANDARD TOOL | 3 | |
| 99A57103042000 | NDT REFERENCE STANDARD TOOL | 2 | |
| 99A57103043000 | NDT REFERENCE STANDARD TOOL | 2 | |
| 99A571043001 | NDT REF STANDARD TOOL | 1 | |
| 99A57204403001 | NDT REFERENCE STANDARD | 5 | |
| 99D51407291001 | STANDARD SET, CALIBRATION (NDT) | 7 | |
| 99D53207304000 | REFERENCE STANDARD (NDT) | 5 | |
| 99D54403002000 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 4 | |
| 99D54403003000 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 4 | |
| 99D54403004000 | NDT REF STANDARD TOOL | 6 | |
| 99D54403007000 | NDT REFERENCE STANDARD | 3 | |
| 99D55109001000 | STANDARD AIRBUS CARBON NDT-US | 7 | |
| 99D57103002001 | REFERENCE STANDARD (NDT) | 5 | |
| 99D57103007000 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 3 | |
| 99D57103013000 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 6 | |
| 99D57103015000 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 4 | |
| 99D57103016000 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 7 | |
| 99D57103021000 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 5 | |
| 99D57204101000 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 1 | |
| 99D57204105000 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 5 | |
| 99D57204116000 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 3 | |
| 99D57204163000 | STANDARD, 3 TITANIUM AIRCRAFT BOLTS (NDT) | 3 | |
| 99D57204169000 | BLOCK, NDT STANDARD REFERENCE | 3 | |
| 99D57504100000 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 2 | |
| 99D57504102000 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 4 | |
| 99D57504103001 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 3 | |
| 99D57504107000 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 2 | |
| 99D57504108000 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 2 | |
| 99D57704100000 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 2 | |
| 99F-533-03044-000 | Reference Standard NDT | 1 | |
| 99F54503005000 | NDT REFERENCE STANDARD | 2 | |
| 99F57103042001 | NDT # REFERENCE STANDARD | 2 | |
| 99F57103051000 | NDT # REFERENCE STANDARD | 1 | |
| 99F57204102000 | NDT # Cal. Standard | 7 | |
| 99F57204172000 | AIRBUS NDT REFERENCE STANDARD | 2 | |
| 99F57500001000 | NDT # Reference Standard | 2 | |
| 99N51107332000 | REFERENCE STANDARD NDT | 2 | |
| A10L16-00-25Q | STANDARD PHASED ARRAY PROBE (NDT) | 1 | |
| AF- 4120 | LOW FREQUENCY RING PROBE, 10KHZ-100KHZ, REFLECTION, .405"ID, .800"OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. USED WITH REFERENCE STANDARD: NDT1102-100 TI | 1 | |
| AF-4041 | LOW FREQUENCY DIFFERENTIAL PROBE , 1-40KHZ. Maximum height of .50" inches and diameter of .300" to .320" inches. Flat at the end. Used with ANDT3016-B reference standard. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4041/4F | LOW FREQUENCY DIFFERENTIAL PROBE , 1-40KHZ. Maximum height of .50" inches and diameter of .300" to .320" inches, 4 Pin Fischer Connector. Flat at the end. Used with ANDT3016-B reference standard. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4084 | LOW FREQUENCY REFLECTION RING PROBE, 800HZ-10KHZ, .320"Ø ID,.600"Ø OD x .700"H, WITH TRIAX FISCHER CONNECTOR. REFERENCE: 767 PART 6 53-10-22, NDT6075 REFERENCE STANDARD. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4092 | LOW FREQUENCT RING PROBE, 500Hz-3KHz. REFLECTION, 1.00" OD, .510" ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. For Reference Standard NDT3255 | 1 | |
| AF-4101 | LOW FREQUENCT RING PROBE, 1-10KHz. REFLECTION, .700" OD, .350" ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. For Reference Standard NDT3255 | 1 | |
| AF-4102 | LOW FREQUENCT RING PROBE, 50Hz-5KHz. REFLECTION, .700" OD, .350" ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. For Reference Standard NDT3255 | 1 | |
| AF-4109/TI | LOW FREQUENCY REFLECTION RING PROBE, ID .470, OD.900, 3-10KHZ. For reference standard NDT 3259. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4120 | LOW FREQUENCY RING PROBE, 10KHz-100KHz, REFLECTION, .405"ID, .800"OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. USED WITH REFERENCE STANDARD: NDT1102-100 Ti | 1 | |
| AF-4124/300H | REFLECTION RING PROBE TRIAX FISHER CONNECTOR, 1.25"OD .75" ID(19.6mm) 300HZ-1KHZ. 737 PART 6 57-10-53, pg.2, USED WITH REFERENCE STANDARD NDT3168 AND NDT3176-X. Includes test report and Certificate of Conformance. | 1 | |
| AF-4125/100H | CUSTOM REFLECTION RING PROBE 1.2" OD, .605" ID, 50Hz-3KHz TRIAX FISHER CONNECTOR. 737 PART 6 57-10-58, pg.2. and 737 PART 6 57-10-54, pg.2 USED WITH NDT3153-X AND 3167-X SERIES REFERENCE STANDARDS. Includes Test Report and Certificate of Conform... | 1 | |
| AF-4144 | LOW FREQUENCY DIFFERENTIAL PROBE , 1-40KHZ. Maximum height of .50" inches and diameter of .300" to .320" inches. 10 inches long Flat at the end. Used with ANDT3016-B reference standard. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4153/TI | LOW FREQUENCY RING PROBE 1-15KHz, REFLECTION, ID.565" OD.910",SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. For Reference Standard NDT 3225. | 1 | |
| AF-4202 | LOW FREQUENCY REFLECTION RING PROBE, 500HZ-5KHZ, ID 0.325", OD 0.790" (MAX). 1.05" HEIGHT. TRIAX FISCHER CONNECTOR. USED WITH NDT6097 REFERENCE STANDARD Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4334 | Low Frequency Reflection Ring Probe, 40Hz-500Hz. 1.3"Ø I.D. 2.0"Ø O.D., supplied with a Triax Fischer Connector. REFERENCE STANDARD: NDT7035. Includes test report and Certificate of Conformance. | 1 | |
| AF-5272 | CUSTOM COUNTERBORE ROTARY ADJUSTABLE X STYLE PROBE WITH THE COIL LOCATED AT THE EDGE OF THE PROBE TIP, .936'-1.0" 2.0"WL, SUPPLIED WITH A 4 PIN FICHER CONNECTOR, 100 KHz-2MHz Includes Test Report and Certificate of Conformance REFERENCE STANDARD - NDT3117 | 1 | |
| AF-6006 | SLIDING PROBE, REFLECTION, 1-40KHZ TRIAX FISHER CONNECTOR. REFERENCE STANDARD USED ( NDT1099) 757 PT. 6, 53-30-14. Includes Certification Report and COC. | 1 | |
| AFK-1014 | Custom Ultrasonic Kit, PART 4 53-10-13 for the WING REAR SPAR - STA 663.75 REAR SPAR BULKHEAD SIDE FRAME FITTING FAIL SAFE STRAP. Kit includes 1 of each AFM-560AT & AFS-0541 Transducers, 1 NDT3312 Reference Standard and 1 ABNC-MD6. Supplied with a waterpr | 1 | |
| AFK-1030 | Cusom Ultrasonic Inspection Kit for Boeing 787. Kit contents include: NDT815 reference standard. Transducer part numbers: AFS-0570-1R, AFS-0570-1L, AFS-0570-2R, AFS-0570-2L, AFS-0570-3R, AFS-0570-3L, AFS-0570-4R, AFS-0570-4L, AFS-0570-5R, AFS-0570-5L | 1 | |
| AFK-1031UT | NDT STANDARDS AND TRANSDUCERS KIT | 1 | |
| AFK-ECS6 | EDDY CURRENT SURFACE PROBE KIT. Includes the Following Cable, Surface standards and probes: ACN16-TF6-B, AFNDT-2030/4340, AFNDT-2030/7075-T6, ATPN-45-5, ATPN-45-5FX, ATPN-5, ATPN-5FX, ATPN-95-5, ATPN-95-5, PELICAN STYLE WATERPROOF kIT BOX. Supplied wit... | 1 | |
| AFNDT-2054AL-2 | CUSTOM ALUMINUM REFERENCE STANDARD PER BOEING SPECIFICATION NDT1016-NDT1021, 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. WITH HOLE DIAMETERS: .125" .156", .187", .250",.375",.500". CORNER... | 1 | |
| AFNDT-2054CS-1 | CUSTOM REFERENCE STANDARD PER BOEING SPECIFICATION NDT1040-NDT1045, 707, 727, 737, 747 PT 6 51-00-00 FIG 19, 757, 767 PT 6 51-00-17, 777 PT 6 51-00-05 PROCEDURE 2, 787 PT 6 51-00-04 PROCEDURE 1. DIAMETERS: .156",.250",.312",.375",.437",.500". CORN... | 1 | |
| AFNDT-2054CS-2 | CUSTOM REFERENCE STANDARD PER BOEING SPECIFICATION NDT1040-NDT1045, 707, 727, 737, 747 PT 6 51-00-00 FIG 19, 757, 767 PT 6 51-00-17, 777 PT 6 51-00-05 PROCEDURE 2, 787 PT 6 51-00-04 PROCEDURE 1. DIAMETERS: .125", .156", .187" ,.250",.375", .500". ... | 1 | |
| AFNDT-2075/TI | REFERENCE STANDARD TO NDT | 1 | |
| AFNDT-2227Ti | CUSTOM TITANIUM EDDY CURRENT MULTI HOLE STANDARD WHICH COMBINES BOEING PART NUMBERS NDT1022-NDT1027 STANDARDS INTO ONE PART..HOLE SIZES ( 0.188", 0.250", 0.313", 0.375",0.438", 0.500" ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3001 | Embraer 170 reference standard with a .473" diameter hole. Per NDTM PT1 51-00-00-916-802-A , 1.4mm x 1.4mm +/-.05mm long x 0.1mm +/-.05 wide corner EDM notch. Material: 7050-T7 Aluminum. Block size 2.0" x 2.0" x .375". Includes Test Report and Certifica | 1 | |
| AFNDT-3104 | NDT REFERENCE STANDARD | 1 | |
| AFNDT-3218AL | CUSTOM HOLE STANDARD IN 2024-T351 ALUMINUM PER BOEING PART NUMBER NDT1084. EDM CORNER NOTCH SIZES: .020" x .020" x .005" +/- .002 " and .030" x .030" x .005" +/- .002" HOLE SIZES: 9/64,10/64,11/64,12/64,13/64, 14/64, 15/64, 16/64, 17/64, 18/64, 19/64... | 1 | |
| AFNDT-3219AL | CUSTOM HOLE STANDARD IN 2024-T351 ALUMINUM PER BOEING PART NUMBER NDT1084. EDM CORNER NOTCH SIZES: .020" x .020" x .005" +/- .002 " and .030" x .030" x .005" +/- .002" HOLE SIZES: 37/64,38/64,39/64,40/64,41/64, 42/64, 43/64, 44/64, 45/64, 46/64, 47/6... | 1 | |
| AFNDT-3220ST | CUSTOM HOLE STANDARD IN 4340 OR 4340M STEEL PER BOEING PART NUMBER NDT1084. EDM CORNER NOTCH SIZES: .030" x .030" x .005" +/- .002" HOLE SIZES: 9/64,10/64,11/64,12/64,13/64, 14/64, 15/64, 16/64, 17/64, 18/64, 19/64, 20/64, 21/64, 22/64, 23/64, 24/64, ... | 1 | |
| AFNDT-3221ST | CUSTOM HOLE STANDARD IN 4340 OR 4340M STEEL PER BOEING PART NUMBER NDT1083. EDM CORNER NOTCH SIZES: .030" x .030" x .005" +/- .002" HOLE SIZES: 37/64,38/64,39/64,40/64,41/64, 42/64, 43/64, 44/64, 45/64, 46/64, 47/64, 48/64, 49/64, 50/64, 51/64, 52/64... | 1 | |
| AFNDT-3222TI | CUSTOM HOLE STANDARD IN 6AL-4V TITANIUM PER BOEING PART NUMBER NDT1027. EDM CORNER NOTCH SIZES: .050" x .050" x .005" + 0.000 / - 0.002" HOLE SIZES:9/64,10/64,11/64,12/64,13/64, 14/64, 15/64, 16/64, 17/64, 18/64, 19/64, 20/64, 21/64, 22/64, 23/64, 24/... | 1 | |
| AFNDT-3223TI | CUSTOM HOLE STANDARD IN 6AL-4V TITANIUM PER BOEING PART NUMBER NDT1027. EDM CORNER NOTCH SIZES: .050" x .050" x .005" +0.000 / - 0.002" HOLE SIZES: 37/64,38/64,39/64,40/64,41/64, 42/64, 43/64, 44/64, 45/64, 46/64, 47/64, 48/64, 49/64, 50/64, 51/64, 5... | 1 | |
| AFNDT-3295 | CUSTOM HOLE STANDARD IN 4340 OR 4340M STEEL PER BOEING PART NUMBER NDT1083 PART 6 51-00-00 PROCEDURE 19. EDM CORNER NOTCH SIZES: .030" x .030" x .005" +/- .002". 13 HOLE SIZES: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 17/32, 9/ | 1 | |
| AFNDT-3554 | CUSTOM 4 HOLE STANDARD IN 2024-T351 ALUMINUM PER BOEING PART NUMBER NDT1084. EDM CORNER NOTCH SIZES: .020" x .020" x .005" +/- .002 " and .030" x .030" x .005" +/- .002" HOLE SIZES: .875"(7/8"), .937" (15/16"), 1.0", 1.125". Includes Test Report and ... | 1 | |
| AFNDT-3555 | CUSTOM 5 HOLE STANDARD IN 2024-T351 ALUMINUM PER BOEING PART NUMBER NDT1084. EDM CORNER NOTCH SIZES: .020" x .020" x .005" +/- .002 " and .030" x .030" x .005" +/- .002" HOLE SIZES: .531" (17/32"), .625" (5/8"), .750" (3/4"), .875"(7/8"), .906"(29/32... | 1 | |
| AFS-0506 | 5MHZ 51° SHEAR WAVE IN ALUMINUM. CASE SIZE .50" W x .80"L x .37"H, REFERENCE STANDARD NDT624 | 1 | |
| AFS-0507 | 5MHZ 32° SHEARWAVE IN ALUMINUM. CASE SIZE .50"X.80"L. HEIGHT TAPERS FROM .20"H FRONT TO .32" H BACK. REFERENCE STANDARD IS NDT624 | 1 | |
| AFS-0524 | 5 MHz shear wave transducer .25" x .25" square element. 1.025 radius top mount connector. used with NDT3238 ref. standard | 1 | |
| AFS-0539 | Custom 5MHz 45 degree shearweave ring transducer which features both right and left scanning directions. Ref. Standard NDT796 | 1 | |
| AFS-0570-1L | CUSTOM ANGLE BEAM TRANSDUCER (LEFT) FOR ( .328" )DIAMETER FASTENER HOLE'S (0.430" ) STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-1R | CUSTOM ANGLE BEAM TRANSDUCER (RIGHT) FOR ( .328" )DIAMETER FASTENER HOLE'S (0.430" ) STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-2L | CUSTOM ANGLE BEAM TRANSDUCER (LEFT) FOR (0.438" & 0.500") DIAMETER FASTENER HOLE'S (0.430" & 0.590") STEPS OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-2R | CUSTOM ANGLE BEAM TRANSDUCER (RIGHT) FOR (0.438" & 0.500") DIAMETER FASTENER HOLE'S (0.430" & 0.590") STEPS OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-3L | CUSTOM ANGLE BEAM TRANSDUCER (LEFT) FOR (0.642") DIAMETER FASTENER HOLE IN (0.570") STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-3R | CUSTOM ANGLE BEAM TRANSDUCER (RIGHT) FOR (0.642") DIAMETER FASTENER HOLE IN (0.570") STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-4L | CUSTOM ANGLE BEAM TRANSDUCER (LEFT) FOR (0.438") DIAMETER FASTENER HOLE (0.710") STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-4R | CUSTOM ANGLE BEAM TRANSDUCER (RIGHT) FOR (0.438") DIAMETER FASTENER HOLE (0.710") STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-5L | CUSTOM ANGLE BEAM TRANSDUCER (LEFT) FOR (0.625") DIAMETER FASTENER HOLE IN (0.850") STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0570-5R | CUSTOM ANGLE BEAM TRANSDUCER (RIGHT) FOR (0.625") DIAMETER FASTENER HOLE IN (0.850") STEP OF REFERENCE STANDARD NDT815 | 1 | |
| AFS-0572-1L | CUSTOM 45° IN STEEL ANGLE BEAM TRANSDUCER (LEFT) FOR ( .307" )DIAMETER FASTENER HOLE'S (0.340" ) STEP OF REFERENCE STANDARD NDT6091. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-1R | CUSTOM 45° IN STEEL ANGLE BEAM TRANSDUCER (RIGHT) FOR ( .307" )DIAMETER FASTENER HOLE'S (0.340" ) STEP OF REFERENCE STANDARD NDT6091. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-2L | CUSTOM 50° IN STEEL ANGLE BEAM TRANSDUCER (LEFT) FOR ( .307" )DIAMETER FASTENER HOLE'S (0.240" ) STEP OF REFERENCE STANDARD NDT6092. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-2R | CUSTOM 50° IN STEEL ANGLE BEAM TRANSDUCER (RIGHT) FOR ( .307" )DIAMETER FASTENER HOLE'S (0.240" ) STEP OF REFERENCE STANDARD NDT6092. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-3L | CUSTOM 60° IN STEEL ANGLE BEAM TRANSDUCER (LEFT) FOR ( .307" )DIAMETER FASTENER HOLE'S (0.200" ) STEP OF REFERENCE STANDARD NDT6092. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-3R | CUSTOM 60° IN STEEL ANGLE BEAM TRANSDUCER (RIGHT) FOR ( .307" )DIAMETER FASTENER HOLE'S (0.200" ) STEP OF REFERENCE STANDARD NDT6092. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-4L | CUSTOM 60° IN STEEL ANGLE BEAM TRANSDUCER (LEFT) FOR ( .412" )DIAMETER FASTENER HOLE'S (0.200" ) STEP OF REFERENCE STANDARD NDT6092. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0572-4R | CUSTOM 60° IN STEEL ANGLE BEAM TRANSDUCER (RIGHT) FOR ( .412" )DIAMETER FASTENER HOLE'S (0.200" ) STEP OF REFERENCE STANDARD NDT6092. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1175 | 70°. ANGLE BEAM TRANSDUCER in ALUMINUM, SIDE MOUNT MICRODOT CONNECTOR, .187" x .187" ELEMENT. CASE SIZE: .67'L x .26"W x .33"H. Includes Test Report and Certificate of Conformance. Reference: B767 Part 4 53-50-05. Standard Part number NDT679 | 1 | |
| AFS-1175T | 70°. ANGLE BEAM TRANSDUCER in ALUMINUM, .187" x .187" ELEMENT, TOP MOUNTED MICRODOT CONNECTOR. CASE SIZE: .67'L x .26"W x .33"H. Includes Test Report and Certificate of Conformance. Reference: B767 Part 4 53-50-05. Standard Part number NDT679 | 1 | |
| AFS-5825 | Custom 5MHz 22° shear wave transducer .375" element. 1.90"(51mm) radius. Case Size: .75"L x .50"W x .25"H. Used with reference standard NDT3195. | 1 | |
| AFS-5826 | Custpm 5MHz 31° shear wave transducer .375" element. 2.0"(51mm) radius. Case Size: ..75"L x .50"W x .25"H end mounted microdot connector. Used with reference standard NDT3196. | 1 | |
| AFS-5827 | Custpm 5MHz 33° shear wave transducer .375" element. 2.0"(51mm) radius. Case Size: ..75"L x .50"W x .25"H end mounted microdot connector. Used with reference standard NDT3197. | 1 | |
| AFS-5828 | Custpm 5MHz 26° shear wave transducer .375" element. 2.0"(51mm) radius. Case Size: ..75"L x .50"W x .25"H end mounted microdot connector. Used with reference standard NDT3197. | 1 | |
| AGE-02001-401 | KIT-REFERENCE STANDARD NDT | 1 | |
| AGE-04329-401 | NDT REF STANDARD | 1 | |
| AGE-04362-401 | NDT STANDARD REFERENCE | 1 | |
| AGE-04707- 401 | NDT REFERENCE STANDARD | 2 | |
| AGE-04900-401 | NDT STANDARD REFERENCE | 4 | |
| AGE-05697-401 | NDT CALIBRATION STANDARD | 3 | |
| AGE04900-401 | EMBRAER 145 NDT CALIBRATION STANDARD PART | 4 | |
| AL-BOEING REF STD PART6 51-00-0 | AL REF STANDARD FOR BOEING NDT PART 6 51-00-00 PROCEDURE 16 | 1 | |
| AL29-32 | NDT, STANDARDS, CALIBRATION | 6 | |
| AL35-45 | NDT, STANDARDS, CALIBRATION | 8 | |
| ANDT 3004 | Reference standard ANDT 3004 | 3 | |
| ANDT-1049 | Reference Standard ANDT-1049 | 3 | |
| ANDT-1050 | Reference Standard ANDT-1050 | 3 | |
| ANDT-1051 | Reference Standard ANDT-1051 | 4 | |
| ANDT-1052 | Reference Standard ANDT-1052 | 3 | |
| ANDT-1053 | Reference Standard ANDT-1053 | 5 | |
| ANDT-1054 | Reference Standard ANDT-1054 | 3 | |
| ANDT-1055 | Reference Standard ANDT-1055 | 3 | |
| ANDT-1056 | Reference Standard ANDT-1056 | 4 | |
| ANDT-1057 | Reference Standard ANDT-1057 | 3 | |
| ANDT-3019 | Reference Standard ANDT-3019 | 3 | |
| ANDT1015 | NDT REFERENCE STANDARD | 3 | |
| ANDT1049 | NDT REFERENCE STANDARD | 3 | |
| ANDT1050 | NDT REFERENCE STANDARD | 3 | |
| ANDT1051 | NDT REFERENCE STANDARD | 4 | |
| ANDT1052 | NDT REFERENCE STANDARD | 3 | |
| ANDT1053 | NDT REFERENCE STANDARD | 5 | |
| ANDT1054 | NDT REFERENCE STANDARD | 3 | |
| ANDT1055 | NDT REFERENCE STANDARD | 3 | |
| ANDT1056 | NDT REFERENCE STANDARD | 4 | |
| ANDT1057 | NDT REFERENCE STANDARD | 3 | |
| ANDT1077 | NDT REFERENCE STANDARD | 4 | |
| ANDT1079 | REFERENCE STANDARD (NDT) | 4 | |
| ANDT1080 | NDT Reference Standard | 2 | |
| ANDT1081 | REFERENCE STANDARD (NDT) | 2 | |
| ANDT3004 | REFERENCE STANDARD (NDT) | 3 | |
| ANDT3019 | NDT REFERENCE STANDARD | 3 | |
| ARD-1025/375 | STANDARD REFERENCE : NDT3322A | 1 | |
| ARP-.75-1.25/300Hz | REFLECTION RING PROBE, 1.25"OD .75" ID(19.6mm) TRIAX FISHER CONNECTOR 300HZ-1KHZ. REFERENCE STANDARD NDT3176-X 737 PT 6 57-10-59, 737 PART 6 57-10-53 NDT3168. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.85/1.40-200Hz | LOW FREQUENCY REFLECTION RING PROBE .85" I.D. 1.40" O.D. TRIAX CONNECTOR 100Hz-500Hz. REFERENCE STANDARD NDT3176-X 737 PT 6 57-10-59. Includes test report and Certificate of Conformance. | 1 | |
| ARP-1.2/100H-7 | LOW FREQUENCY REFLECTION RING PROBE 1.2" OD, .605" ID, 50Hz-3KHz TRIAX FISHER CONNECTOR. 737 PART 6 57-10-58, pg.2. and 737 PART 6 57-10-54, pg.2 USED WITH NDT3153-X AND 3167-X SERIES REFERENCE STANDARDS. Includes Test Report and Certificate of ... | 1 | |
| ARP-1.25-.75-300H | REFLECTION RING PROBE TRIAX FISHER CONNECTOR, 1.25"OD .75" ID(19.6mm) 300HZ-1KHZ. 737 PART 6 57-10-53, pg.2, USED WITH REFERENCE STANDARD NDT3168 AND NDT3176-X. Includes test report and Certificate of Conformance... | 1 | |
| ARP-1.40/.85-200Hz | LOW FREQUENCY REFLECTION RING PROBE .85" I.D. 1.40" O.D. TRIAX FISCHER CONNECTOR 100Hz-500Hz. REFERENCE STANDARD NDT3176-X 737 PT 6 57-10-59. Includes test report and Certificate of Conformance. | 1 | |
| DHC29298-001 | NDT CALIB STANDARD | 1 | |
| DHC29298-003 | NDT CALIBRATION STANDARD | 1 | |
| E400089-ENC | CONFIRM FROM NDT FOR STANDARD | 1 | |
| E400089−ENC | CONFIRM FROM NDT FOR STANDARD | 1 | |
| E54-003 | EMBRAER 170/175 CALIBRATION STANDARD PT 4 54-50-00 Embraer 170 NDT 1967 Rev. 49, pages 11-13 and Embraer 175 NDT 5893 Rev. 25, pages 10-12. Includes Test Report and Certificate of Conformance. | 1 | |
| EC-AF-NRK-3A | CTS-PH-TOOL, CONFIRM FROM NDT FOR STANDARD | 1 | |
| EC-AF-NRK-3AL | CTS-PH-TOOL, CONFIRM FROM NDT FOR STANDARD | 1 | |
| EC-AF-NRK-3S | CTS- PH-TOOL,CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50051-003 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50051−003 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50069-001 | NDT CALIBRATION STANDARD | 1 | |
| EXBD400-50069-004 | NDT CALIBRATION STANDARD | 1 | |
| EXBD400-50072-001 | NDT REFERENCE STANDARD | 1 | |
| EXBD400-50077 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50077-001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50077−001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50093−003 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50094−001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50102-001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50102−001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50103 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50103-001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50104−001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50111 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50111-001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50112 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50112-001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50113 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50113-001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50122−001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50124−001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400-50151-003 | NDT REFERENCE STANDARD | 1 | |
| EXBD400-50151-007 | NDT REFERENCE STANDARD | 1 | |
| EXBD400-50152-001 | NDT REFERENCE STANDARD | 1 | |
| EXBD400-50152-007 | NDT REFERENCE STANDARD | 1 | |
| EXBD400-53070-001 | NDT CALIBRATION TEST STANDARD | 2 | |
| EXBD400−50051−003 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400−50077 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400−50077−001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400−50093−003 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400−50094−001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400−50102−001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400−50103 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400−50104−001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400−50111 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400−50112 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400−50113 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400−50122−001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| EXBD400−50124−001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| GSB5500001 | REFERENCE STANDARD NDT TOOL | 1 | |
| GSE 497 | NDT REF STANDARD | 1 | |
| GSE 503 | EMBRAER 190/195 REFERENCE STANDARD PT 4 53-10-00 pages 1-12 Embraer 190-NDT 2824, 270-801-B. Includes Test Report and Certificate of Conformance. | 1 | |
| GSE 518 | NDT REFERENCE STANDARD | 1 | |
| HRS-10A-0/0824 | NDT STANDARD TEMPLATE | 1 | |
| INCONEL718 | NDT, STANDARDS, CALIBRATION | 1 | |
| ITEM21-0-130L0WERPART | A400M NDT TEST STANDARD | 1 | |
| MAT/ULT/183 | NDT_MAT/ULT/183 (CALIBRATION TEST STANDARD) | 2 | |
| MAT/ULT/TP183 | NDT REFERENCE STANDARD | 1 | |
| NDT 1086-040 | BOEING REFERENCE STANDARD NDT1086-040 767 PT 4 53-00-01 AND 747 PT 4 53-30-05 | 3 | |
| NDT 1086-080 | Reference Standard NDT 1086-080 | 3 | |
| NDT 1086-090 | Reference Standard NDT 1086-090 | 3 | |
| NDT 3087R&D | NDT 3087 Reference Standard R&D | 1 | |
| NDT 3170 | 737 reference standard NDT 3170 | 5 | |
| NDT-1039-.040-.056 | Reference Standard NDT-1039-.040-.056 | 1 | |
| NDT-1039-.040-.080 | Reference Standard NDT-1039-.040-.080 | 1 | |
| NDT-1039-.050-.080 | Reference Standard NDT-1039-.050-.080 | 1 | |
| NDT-1048 | Reference Standard NDT-1048 | 4 | |
| NDT-1069A | Reference Standard NDT-1069A | 1 | |
| NDT-1069B | Reference Standard NDT-1069B | 1 | |
| NDT-1086-032 | Reference Standard NDT-1086-032 | 3 | |
| NDT-1086-050 | Reference Standard NDT-1086-050 | 3 | |
| NDT-1086-060 | Reference Standard NDT-1086-060 | 3 | |
| NDT-1086-070 | Reference Standard NDT-1086-070 | 3 | |
| NDT-1086-080 | Reference Standard NDT-1086-080 | 3 | |
| NDT-1086-090 | Reference Standard NDT-1086-090 | 3 | |
| NDT-1086-100 | Reference Standard NDT-1086-100 | 3 | |
| NDT-1086-110 | Reference Standard NDT-1086-110 | 3 | |
| NDT-1086-120 | Reference Standard NDT-1086-120 | 3 | |
| NDT-1094-040 | Reference Standard NDT-1094-040 | 2 | |
| NDT-1094-050 | Reference Standard NDT-1094-050 | 2 | |
| NDT-1094-070 | Reference Standard NDT-1094-070 | 2 | |
| NDT-1094-090 | Reference Standard NDT-1094-090 | 2 | |
| NDT-1094-110 | Reference Standard NDT-1094-110 | 1 | |
| NDT-3005 | Reference Standard NDT 3005 | 1 | |
| NDT-3007 | Reference Standard NDT 3007 | 1 | |
| NDT-3015 | Reference Standard NDT-3015 | 2 | |
| NDT-3050 | Ref Standard NDT-3050,B737 53-30-20 | 4 | |
| NDT-3065 | REFERENCE STANDARD NDT-3065 | 3 | |
| NDT-3065-STL | REFERENCE STANDARD NDT-3065-STL | 2 | |
| NDT-3091 | Reference Standard NDT-3091 | 2 | |
| NDT006 | NDT REFERENCE STANDARD BOEING 767 | 1 | |
| NDT1031 | STANDARD NDT | 1 | |
| NDT1033/LHTB0156 | NDT reference standard | 1 | |
| NDT1038 | Reference Standard NDT1038 | 3 | |
| NDT1039-T1/T2 | BOEING REFERENCE STANDARD NDT1039-T1/T2 X 1SET OF 5 PIECES | 2 | |
| NDT1048 | standard number NDT1048 | 4 | |
| NDT1048-4.8/8.7 | Boeing Standard, Multi Hole, Certified to 737 PT6 51-00-00 FIG16 PG10, 7075-T6 w/ .020 x.020 x .005 MAX Width, PN will be NDT1048-4.8 NDT1048-5.1 NDT1048-5.5 NDT1048-6.3 NDT1048-6.7 NDT1048-7.1 NDT1048-7.9 NDT1048-8.3 NDT1048-8.7 | 1 | |
| NDT1079 | Reference Standard NDT1079 | 1 | |
| NDT1085-032 | REFERENCE STANDARD (NDT) | 3 | |
| NDT1085-036 | REFERENCE STANDARD (NDT) | 3 | |
| NDT1085-050 | REFERENCE STANDARD (NDT) | 2 | |
| NDT1085-063 | REFERENCE STANDARD (NDT) | 2 | |
| NDT1085-071 | REFERENCE STANDARD (NDT) | 2 | |
| NDT1085-080 | REFERENCE STANDARD (NDT) | 2 | |
| NDT1085-090 | REFERENCE STANDARD (NDT) | 2 | |
| NDT1085-100 | REFERENCE STANDARD (NDT) | 2 | |
| NDT1085-112 | REFERENCE STANDARD (NDT) | 2 | |
| NDT1085-125 | REFERENCE STANDARD (NDT) | 2 | |
| NDT1087-1 | BOEING REFERENCE STANDARD 737 PT 6 53-30-00 & 777 PT 6 53-30-09 .050/.040. INCLUDES NDT1087-P1 POSITIONERS. Includes Test Report and Certificate of Conformance. | 4 | |
| NDT1087-2 | BOEING REFERENCE STANDARD 737 PT 6 53-30-00 & 777 PT 6 53-30-09. .071/.040. INCLUDES NDT1087-P1 POSITIONERS. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT1087-3 | REFERENCE STANDARD NDT | 3 | |
| NDT1087-P1 | PROBE GUIDE USED WITH NDT1087 SERIES REFERENCE STANDARDS. BOEING 737 PART 6 53-30-00 and 777 PART 6 53-00-09 PAGE 9 FIGURE 3 | 3 | |
| NDT1088-072/050 | REFERENCE STANDARD (FROM AEROFAB OR ANDREW NDT) | 4 | |
| NDT1094-040 | REFERENCE STANDARD (NDT) | 2 | |
| NDT1097A | NDT1097A reference standard | 2 | |
| NDT1097B | NDT1097B Reference standard | 2 | |
| NDT1097C | NDT1097C Reference standard | 2 | |
| NDT1099 | NDT CALIBRATION STANDARD | 4 | |
| NDT128 | NDT REFERENCE STANDARD | 1 | |
| NDT194B | Reference Standard NDT194B | 2 | |
| NDT2032-A | REFERENCE STANDARD NDT | 1 | |
| NDT3001 | standard NDT3001 | 2 | |
| NDT3021 | NDT Reference Standard | 6 | |
| NDT3024A | Reference Standard NDT3024A | 2 | |
| NDT3049 | Reference Standard NDT3049 | 2 | |
| NDT3053 | NDT REFERENCE STANDARD | 1 | |
| NDT3068 | REFERENCE STANDARD (NDT) | 5 | |
| NDT3077 | Reference Standard NDT-3077 | 2 | |
| NDT3118 | NDT3118 REFERENT STANDARD | 3 | |
| NDT3152A-K | Boeing Standard 737 PT6 57-10-55 PG 8 FG 2, NDT3152A THRU K | 1 | |
| NDT3153A-J | Boeing Standard 737 PT6 57-10-54 PG 6 FG 2, NDT3153A THRU J | 1 | |
| NDT3156 | REFERENCE STANDARD (NDT) | 4 | |
| NDT3157 | REFERENCE STANDARD (NDT) | 4 | |
| NDT3159 | REFERENCE STANDARD (NDT) | 4 | |
| NDT3161 | REFERENCE STANDARD (NDT) | 3 | |
| NDT3162 | REFERENCE STANDARD (NDT) | 4 | |
| NDT3164 | REFERENCE STANDARD (NDT) | 3 | |
| NDT3166-007 | REFERENCE STANDARD (NDT) | 4 | |
| NDT3167A-J | Boeing Standard 737 PT6 57-10-58 PG 7 FG 2, NDT3167A THRU J | 1 | |
| NDT3169 | NDT REFERENCE STANDARDS | 1 | |
| NDT3170 | REFERENCE STANDARD (NDT) | 5 | |
| NDT3171 | REFERENCE STANDARD (NDT) | 5 | |
| NDT3176-A | REFERENCE STANDARD (NDT) | 3 | |
| NDT3176-B | REFERENCE STANDARD (NDT) | 3 | |
| NDT3176-C | REFERENCE STANDARD (NDT) | 3 | |
| NDT3176-D | REFERENCE STANDARD (NDT) | 3 | |
| NDT3178-A | REFERENCE STANDARD (NDT) | 2 | |
| NDT3178-BOEING | REFERENCE STANDARD (NDT) | 1 | |
| NDT3178-C | REFERENCE STANDARD (NDT) | 3 | |
| NDT3178-D | REFERENCE STANDARD (NDT) | 3 | |
| NDT3178-E | REFERENCE STANDARD (NDT) | 2 | |
| NDT3178-F | REFERENCE STANDARD (NDT) | 2 | |
| NDT3178-G | REFERENCE STANDARD (NDT) | 2 | |
| NDT3178A-G | Boeing Standard 737 PT6 57-10-62 PG 7 FG 2, NDT3178A THRU G | 1 | |
| NDT3179-A | BOEING STANDARD 737 NDT Manual Part 6 Chapter 53-30-39 | 1 | |
| NDT3179-B | BOEING STANDARD 737 NDT Manual Part 6 Chapter 53-30-39 | 1 | |
| NDT3179-C | BOEING STANDARD 737 NDT Manual Part 6 Chapter 53-30-39 | 1 | |
| NDT3211 | BOEING REFERENCE STANDARD B737 NDTM P6, 57-10-81, PAGE 9 FIGURE 3. Includes test report and Certificate of Conformance. | 1 | |
| NDT3212 | BOEING REFERENCE STANDARD B737 NDTM P6, 57-10-81 PAGE 10 FIGURE 4. Includes test report and Certificate of Conformance. | 1 | |
| NDT3267-T1/T2 | BOEING REFERENCE STANDARD NDT3267-T1/T2 X 1SET OF 4 PIECES | 1 | |
| NDT3271 | REFERENCE STANDARD NDT TOOL | 1 | |
| NDT3276 | NDT3276(REF STANDARD) | 2 | |
| NDT3276A | REFERENCE STANDARD NDT TOOL | 2 | |
| NDT3301A | REFERENCE STANDARD B737 NDTM P4 53-10-13 | 1 | |
| NDT3312 | NDT CALIBRATION BLOCK REFERENCE STANDARD | 2 | |
| NDT3316 | REFERENCE STANDARD FOR INSPECTION USE ON B737 AS PER B737 NDTM PART 4 53-10-16 | 2 | |
| NDT4244 | TOOLS-REFERENCE STANDARD FOR NDT | 3 | |
| NDT518 | NDT REFERENCE STANDARD | 1 | |
| NDT563 R&D | NDT563 R&D Standard w/ certs | 1 | |
| NDT567-G1 | Positioner, used with Boeing Standard NDT567, .645" Dimension 767 PT4 54-50-02 PG 9 FG 4 | 1 | |
| NDT567-G2 | Positioner, used with Boeing Standard NDT567, .680" Dimension 767 PT4 54-50-02 PG 9 FG 4 | 1 | |
| NDT6000A | Boeing Standard, 767 PT4 57-50-02..Was NDT700A | 2 | |
| NDT6000B | Boeing Standard, 767 PT4 57-50-02..Was NDT700B | 2 | |
| NDT6000C | Boeing Standard, 767 PT4 57-50-02..Was NDT700C | 2 | |
| NDT6000D | Boeing Standard, 767 PT4 57-50-02..Was NDT700D | 2 | |
| NDT6000E | Boeing Standard, 767 PT4 57-50-02..Was NDT700E | 2 | |
| NDT6020 | REFERENCE STANDARD NDT | 2 | |
| NDT6021 | REFERENCE STANDARD NDT | 2 | |
| NDT6022 | REFERENCE STANDARD NDT | 2 | |
| NDT6026 | NDT STANDARD_[NDT6026] | 1 | |
| NDT6045-SC1 | Boeing Transducer Guide. Material: Delrin ( Black Acetal). Used with NDT6045 Reference Standard. 767 PART 4 54-50-08 PAGE 15 FIGURE 3 | 1 | |
| NDT6045-SC2 | Boeing Transducer Guide. Material: Delrin ( Black Acetal). Used with NDT6045 Reference Standard. 767 PART 4 54-50-08 PAGE 15 FIGURE 3 | 1 | |
| NDT6059 | REFERENCE STANDARD NDT | 3 | |
| NDT6091G1 | NDT6091 REFERENCE STANDARD TRANSDUCER GUIDE. MATERIAL: DELRIN(ACETAL) 767 PART 4 54-50-14 PAGE 26 FIGURE 2. | 1 | |
| NDT6091G2 | NDT6091 REFERENCE STANDARD TRANSDUCER GUIDE. MATERIAL: DELRIN(ACETAL) 767 PART 4 54-50-14 PAGE 26 FIGURE 2. | 1 | |
| NDT6092G1 | NDT6092 REFERENCE STANDARD TRANSDUCER GUIDE. MATERIAL: DELRIN(ACETAL) 767 PART 4 54-50-14 PAGE 27 FIGURE 3 | 1 | |
| NDT6092G2 | NDT6092 REFERENCE STANDARD TRANSDUCER GUIDE. MATERIAL: DELRIN(ACETAL) 767 PART 4 54-50-14 PAGE 27 FIGURE 3 | 1 | |
| NDT643-.750 | Boeing Standard, Based on NDT643 with .750 countersink, two fastener holes | 1 | |
| NDT648 | NDT REFERENCE STANDARD | 3 | |
| NDT687 | REFERENCE STANDARD NDT | 2 | |
| NDT690 | REFERENCE STANDARD NDT | 3 | |
| NDT694 | REFERENCE STANDARD NDT | 3 | |
| NDT695 | REFERENCE STANDARD NDT | 3 | |
| NDT697-400 | Boeing Standard, 767-400 Modified NDT697 | 1 | |
| NDT7001P | BOEING LUCITE WEDGE WITH A .315"Ø FLAT BOTTOM HOLE, 2.010" RADIUS FOR A .25"Ø STRAIGHT BEAM TRANSDUCER. USED WITH REFERENCE STANDARD NDT7001. | 1 | |
| NDT7005 | REFERENCE STANDARD NDT7005 BOEING777 | 2 | |
| NDT737 | REFERENCE STANDARD (NDT737-1, NDT737-2, NDT737-3 AND NDT737-4) | 2 | |
| NDT737-X | REFERENCE STANDARD (NDT737-1, NDT737-2, NDT737-3 AND NDT737-4) | 1 | |
| NDT773-G1 | TRANSDUCER GUIDE THE TRANSDUCER GUIDE IS USED WITH REFERENCE STANDARD NDT773 ONLY | 2 | |
| NDT799 | NDTM PART 4 51-00-05 REFERENCE STANDARD | 2 | |
| NDT815-G1 | DELRIN TRANSDUCER GUIDE FOR REFERENCE STANDARD NDT815 | 1 | |
| NDT815-G2 | DELRIN TRANSDUCER GUIDE FOR REFERENCE STANDARD NDT815. | 1 | |
| NDT815-G3 | DELRIN TRANSDUCER GUIDE FOR REFERENCE STANDARD NDT815. | 1 | |
| NDT815-G4 | DELRIN TRANSDUCER GUIDE FOR REFERENCE STANDARD NDT815 | 1 | |
| NDT815-G5 | DELRIN TRANSDUCER GUIDE FOR REFERENCE STANDARD NDT815 | 1 | |
| NDT815-G6 | DELRIN TRANSDUCER GUIDE FOR REFERENCE STANDARD NDT815 | 1 | |
| NEC-6153 | AIR TRACTOR: NDT ENGENEERING REFERENCE STANDARD | 1 | |
| NRK-3A | CTS-PH-TOOL, CONFIRM FROM NDT FOR STANDARD | 1 | |
| NRK-3AL | CTS-PH-TOOL, CONFIRM FROM NDT FOR STANDARD | 2 | |
| NRK-3S | CTS- PH-TOOL,CONFIRM FROM NDT FOR STANDARD | 1 | |
| NRK−3S | CTS- PH-TOOL,CONFIRM FROM NDT FOR STANDARD | 1 | |
| PRO-400B | LCNDT PRO-400B STANDARD INTENSITY, BROAD-BEAM LED UV + WHITE LIGHT LAMP, INCLUDES BATTERY, 110-220V | 1 | |
| RH12-T40-7075T6 | CALIBRATION REFERENCE STANDARD (CRS), ALUMINUM ALLOY, CONDUCTIVITY VALUE OF 35 TO 45 IACS THAT CONTAINS VARIOUS HOLE SIZES WITH 0.040 IN. (1.02 MM) DEEP ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (TECHNA NDTEQUIVALENT) | 1 | |
| RH71-C30C20-7075T6 | 5 Hole Standard, .156", .187", .250", .312", .375", .437, .500"" .030 Corner and .020 corner,.005" width, .030 lendth, 7075T6 Aluminum | 1 | |
| RS0512M-7075T6 | NDT REF STANDARDS FOR A320 AIRBUS INSPEC | 1 | |
| RS0824-2024T3 | REFERENCE STANDARD (TECHNA NDT ) | 2 | |
| RS367SAL | NDT REFERENCE STANDARD 367 BOEING | 1 | |
| SA00-N60S | WEDGE STANDARD (NDT) | 1 | |
| SB09270288-5 | NDT REFERENCE STANDARD - SB09270288-5 | 1 | |
| SB09550023-17 | NDT REFERENCE STANDARD | 2 | |
| SK601R-30039 | NDT CALIBRATION REFERENCE STANDARD | 2 | |
| SRS-0824A | CALIBRATION TEST STANDARD (CTS) / (NDT ENG. CORP.) | 3 | |
| SS137-F2 | NDT REFERENCE STANDARD EDDY CURRENT | 1 | |
| ST8870B-7 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATE. MATERIAL: BMS8-79 FIBERGLASS( 1-10 PLY), PT 1 51-04-00, PAGE 27 FIGURE 8. B737 NDT Part 1, 51-04-00. Includes C-Scan, Certification Report and Certificate of Conformance. | 3 | |
| ST8870B-8 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATE. MATERIAL: BMS8-79 FIBERGLASS( 11-20 PLY), PT 1 51-04-00, PAGE 27 FIGURE 8. B737 NDT Part 1, 51-04-00. Includes C-Scan, Certification Report and Certificate of Conformance. | 3 | |
| ST8870B-9 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATE. MATERIAL: BMS8-79 FIBERGLASS( 21-30 PLY), PT 1 51-04-00, PAGE 27 FIGURE 8. B737 NDT Part 1, 51-04-00. Includes C-Scan, Certification Report and Certificate of Conformance. | 3 | |
| ST8871D | NDT REFERENCE STANDARD | 4 | |
| TEK-2007 | LOW FREQUENCY DIFFERENTIAL PROBE , 1-40KHZ. MAXIMUM HEIGHT OF .50" INCHES AND DIAMETER OF .300" TO .320" INCHES. FLAT AT THE END. USED WITH ANDT3016-B REFERENCE STANDARD. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| TEK-5050-767 | Transducer Kit includes TEK-5050-1 Thru -6 for NDT6025-1 thru -6 standards | 1 | |
| TEK-6187-1A | Hole Standard, 6 holes from .187 to .500, Based on NDT1016 thru NDT1021 series std, 7075T6 | 1 | |
| TEK-6187-1T | Hole Standard, 6 holes from .187 to .500, Based on NDT1022 thru NDT1027 series std, 6AL-4V | 1 | |
| TEK-9087L | 5 MHZ SURFACEWAVE TRANSDUCER, REFERENCE STANDARD NDT3310, LEFT SOUND DIRECTION | 1 | |
| TEK-9087R | 5 MHZ SURFACEWAVE TRANSDUCER, REFERENCE STANDARD NDT3310, RIGHT SOUND DIRECTION | 1 | |
| TEKIT-001 | M7 Standard, SA227 EC Cal Standard, Pattern 2 & 3/SB CC7-53-006/TEK-5566, TEK-5565, TEK-5568, MFLX-8, MFLXR-6, NDT001, TEK-7016-1, TEK-7016-2, TEK-7016-3A, TEK-7016-3B, BN-M6 | 1 | |
| TEKIT-396 | Boeing Reference Standards, 737 PT6 53-30-44, PG7 FIG 2, Kit includes NDT396-36/36, NDT396-40/40, NDT396-45/40, NDT396-50/40, NDT396-56/40, Pelican case 1150 | 1 | |
| TEKIT-5050-767 | TRANSDUCER KIT INCLUDES TEK-5050-1 THRU -6 FOR NDT6025-1 THRU -6 STANDARDS | 1 | |
| U8330115 | Standard Phased Array Probe 10L32-9.9X7-A1-P-2.5-OM-TOP (NDT) | 1 | |
| U8330134 | Standard Phased Array Probe 5L64-64X7-NW1-P-2.5-OM (NDT) | 2 | |
| U8700265 | STANDARD WEDGE SNW1-0L-IHC (NDT) | 2 | |
| U8720008 | WEDGE STANDARD (NDT) | 1 | |
| U8860370 | Reference standard ANDT-1053 | 1 | |
| U8860842 | Boeing reference standard, NDT-398 | 1 | |
| UV-LC-PRO-400B | LCNDT PRO-400B STANDARD INTENSITY, BROAD-BEAM LED UV + WHITE LIGHT LAMP, INCLUDES BATTERY, 110-220V | 1 | |
| VMA.01-0-07 | NDT REFERENCE STANDARD | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
