| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| DLT20MAPW0000 | MODEL 20 | 6 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 64001-07 | SET, AIRCRAFT WEIGHING, MODEL JW200 (CALIBRATION) | 1 | |
| (CALIB) 64001-07J5 | SET, AIRCRAFT WEIGH-ING, MODEL JW200 (CALIBRATION) | 1 | |
| 01-1170-0010 | CESSNA 208B TOW HOOK MODEL 01-1170-0010 TRONAIR | 3 | |
| 01-1201-0010 | TOW HOOK MODEL 01-1201-0010 TRONAIR | 14 | |
| 04-6152-0120 | HYDRAULIC CRANE MODEL 04-6152-0120 (TRONAIR) | 9 | |
| 05-7044-1210 | HYDRAULIC SERVICE UNIT --- MODELS 5020 AND 5110 | 1 | |
| 101-00184-463 | TESTER, PITOT-STATIC PRESSURE (115/220 V) MODEL 1811HA-463 | 4 | |
| 101-00930 | Model TT1200A | 9 | |
| 101-01220 | BARFIELD MODEL 2074F TEST SET (NONOIL LUBRICATED) | 1 | |
| 11518-1 | SIGNAL SELECTOR MODEL 8520C-36 | 1 | |
| 12218-7E | SPEEDOTRON Light Unit, Model 202VF, max power 2400 Watt-sec (NDT) | 1 | |
| 12L2384-B1 | DOTCO Belt Sander - 1/2 HP, 20,000 rpm - Model 12L2384-B1 - Made in USA! | 2 | |
| 1336-20-28 | DRILL ATTACHMENT PANCAKE MAGNAVON MODEL 1336-20-28 | 1 | |
| 14-6801-0120 | TIRE BEAD BRAKER MODEL 14-6801-0120 (TRONAIR) MUST INCLUDE MLW ADAPTER RING Z-1063-17 AND NLW ADAPTER RING Z-1064-10 | 12 | |
| 15F2011 | MAINTENANCE STAND MODEL: 15F2011 APPLICATION: FOR A330 NEO ENGINE | 1 | |
| 16962-07C | MarathonNorco Aerospace 16962-07C Model 24M220CR Ni-Cad Aircraft Battery Cell | 1 | |
| 173MAT | STARRETT FEELER GAUGE SETS FOR TIGHT SPOTS MANUFACTURER MODEL NO.173MAT (CAT. NO.2070A44) | 2 | |
| 1850A4268 | SPECIAL PURPOSE TYPE:TURBINE BORESCOPE POWER:BATTERY SIZE:NA MATL:NA GE TURBINE BORESCOPE TOOL MODEL: XLVUD6120 PART NO: 1850A4268 MANUFACTURER: GE | 1 | |
| 19307588-30 | PMAT2000 TEAC FLOPPY DISK DRIVE MODEL:FD-05HF 8830 | 1 | |
| 20-4500-7000 | OXYGEN BOOSTER (2,200 PSI/152 BAR. MODEL NUMBER 20-4500-7000) | 7 | |
| 201-88 | SWEENEY MODEL 201-88 AIR REGULATOR | 1 | |
| 2020-220V-N-EMB314 | ANALYSER, PROBALANCER-MODEL 2020 | 1 | |
| 2020HR | MODEL 2020PL PROBALANCER ANALYZER | 2 | |
| 2020PL | MODEL 2020PL PROBALANCER ANALYZER | 1 | |
| 2021 COBRA II | MODEL 2020PL PROBALANCER ANALYZER | 1 | |
| 23 | Tesa 00530421 TWIN-CAL IP67 – Models with rounded measuring faces for internal dimensions Digital Calipers 0-200mm / 0-8" | 1 | |
| 1620 | MARKING PENCIL, LISTO MODEL PENSIL NO.1620, REFILL NO 162 | 1 | |
| 1698.20 | AXLE JACK MODEL 20 | 1 | |
| 2000 | Model 2000 - 3 Phase 28V DC Rectifier | 5 | |
| 2024 | TOOL - INSTALLATION (APPLICABLE TO ALL MODELS WITH 140N2022 FUSELAGE REMOVABLE DRAIN VALVES) (MINIMUM ORDER OF 10 REQU (STEWART INDUSTRIES, INC.) | 10 | |
| 2025 | TOOL - LOCATOR, FOR P/N 140N2021-1 DRAIN VALVE RETAINERS (APPLICABLE TO ALL MODELS FOR A/C WITH REMOVABLE DRAIN VALVES) (STEWART INDUSTRIES, INC.) | 3 | |
| 204-405 | BLADE COVERS, 205 model blades (set of 2) | 1 | |
| 204-415 | BLADE COVERS (COLD WEATHER TYPE), 205 model blades (set of 2) | 1 | |
| 208-905 | COCKPIT HEATSHIELD SET (208B models) (set of 4) | 1 | |
| 208-906 | COCKPIT HEATSHIELD SET (208A models) (set of 4) | 1 | |
| 208-910 | HEATSHIELD SET (208A models) (set of 14) | 1 | |
| 208-911 | HEATSHIELD SET (208B models) (set of 18) | 1 | |
| 208-912 | PASSANGER HEATSHIELD SET (208A models) (set of 10) | 1 | |
| 208-913 | PASSANGER HEATSHIELD SET (208B models) (set of 14) | 1 | |
| 2238231-08 | LOADER - DATA, ARINC 615/615A (MODEL IS PMAT 2000) (COM-4963) | 1 | |
| 25-500C-580 | PRESSURE REGULATOR HARRIS MODEL ( 200 +/-10 PSI ) ( VENDOR : HARRIS ) | 2 | |
| 2683301-1 | Cessna reference standard 55-10-02-0 (Rev 1).Model 208 Inspection of Horizontal Stabilizer Spars. | 4 | |
| 27-95031-001 | Fairchild METRO 23, Model SA227-CC, METRO 23, Model SA227-DC,Reference standard for inspection of the MLG and NLG Yoke Assembly. Material: 2024-T351 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 2R0101 | HOSE (MODEL HYCOMHT2000- E/1-D) | 1 | |
| 3170044-1 | AUDIO AMP BREAKOUT BOX (MODEL 205) | 1 | |
| 33A130 | CONNECTION CABLE FOR DIFFERENTIAL REFLECTION PROBES, HOCKING MODEL PHASEC 2200, LEMO 12W TO LEMO 4W CONNECTORS (HOCKING) | 1 | |
| 3GSF-200/43-N | TOOL. MODEL NUMBER: 3GSF-200/43-N | 1 | |
| 4-1020-102 | TEST SET (LIGHT SYSTEM) MODEL TS-420 | 1 | |
| 4-1020-202 | TEST SET (LIGHT SYSTEM) MODEL TS-420 | 1 | |
| 40992G-02 | PUSH BACK GATEWAY DAVID CLARK MODEL U9920-GPB (EC) | 1 | |
| 40993G-02 | PUSH BACK GATEWAY DAVID CLARK MODEL U9920-GPB (EU) | 2 | |
| 40993G-03 | PUSH BACK GATEWAY DAVID CLARK MODEL U9920-GPB (EU) | 1 | |
| 451082PS02L200#XPDXC4 | TEST GAGE MODEL 1082 0-200PSI | 1 | |
| 473597-18 | SMOKE DECTECTOR, MODEL 2000 | 1 | |
| 5231 | HYDRAULIC POWER UNIT TRONAIR MODEL 5231, PRESSURE MAX 3000 PSI - 207 BAR GAUGE MAX 5000 PSI - 345 BAR, 380V-220V/ 50 HZ. | 1 | |
| 52310EI1CFM | UNIT, (BASIC UNIT) HYDRAULIC POWER 220-240V 60HZ AVIATION PHOSPHATE ESTER TYPE IV. (BASIC MODEL REQUIRES INPUT FROM CUSTOMER) | 1 | |
| 5290020-4 | Cessna Model 401/402 Calibration Standard Figure 4 part 2 & 3 Inspection. Plate A - 7075-T6 Aluminum and Plate B - 2024-T3 Aluminum. | 1 | |
| 5500A | MULTIMETER MODEL 200664 COIL - C 50 TURN CURRENT COIL | 1 | |
| 6021-5154 | TIME DOMAIN REFLECTOMETER (TDR), MODEL E20/20 TDR AVIONICS KIT. | 5 | |
| 603-693 | INSTRUMENT - DUALSCOPE THICKNESS MEASUREMENT, MODEL MP20E-S (FISCHER TECHNOLOGY INC) | 1 | |
| 6230-01-374-6329 | PROBE PHOTOCELL MODEL 10200, SUBCOMP OF CHADWICK | 1 | |
| 64001-07J5 | SET, AIRCRAFT WEIGH-ING, MODEL JW200 | 4 | |
| 6583103-1 | Cessna Model 500 Calibration Standard 53-30-03-0 Rev. 14 Figure 4 Sheet 1 Inspection. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 768-13011-1 | MODEL 10200 PHOTOCELL PROBE | 1 | |
| 782D1100 | 20 TON TRIPOD JACK, MODEL | 2 | |
| 80000-03-01010203 | DATA LOADER - PORTABLE, ARINC 615/A WITH MASS STORAGE DEVICE. TOOL MODEL NAME IS "PMAT2000" | 1 | |
| 80000-04-01020301 | DATA LOADER - PORTABLE, ARINC 615/A WITH MASS STORAGE DEVICE. TOOL MODEL NAME IS "PMAT2000" | 1 | |
| 8111A | HP-MODEL (20 MHZ) | 1 | |
| 8202-19 | PART FOR SWEENEY MODEL #SWA8202-45A | 1 | |
| 8202-50 | PART FOR SWEENEY MODEL #SWA8202-45A | 1 | |
| 8202A | SWEENEY MODEL 8202A AIR-TORQUE MULTIPLIER | 2 | |
| 8811B | TRIPOD MODEL 8811B 120 TON | 1 | |
| 901-10200 | MODEL 10200 PHOTOCELL PROBE | 1 | |
| 901-10200-1 | MODEL 10200 PHOTOCELL PROBE | 1 | |
| 901-10200A | Model 10200 Photocell Probe | 2 | |
| 901-14990 | • HONEYWELL CHADWICK HELMUTH MODEL VIBREX 2000 PLUS SERIES V2K+ BALANCER | 2 | |
| 9200 | GAUSSMETER MODEL 9200 | 1 | |
| 13520 | DRILL ATTACHMENT PANCAKE MAGNAVON MODEL 1336-20-28 | 1 | |
| 27187 | GAS BOOSTER MODEL NRO. 27187 (NITRÓGENO) FABRICANTE:HASKEL MILTON ROY (A320-B767) | 1 | |
| 063300 | Loading Bench Model 2000F | 1 | |
| 65158 | TORPEDO MAGNETIC SPIRIT LEVEL 220 MM MODEL A | 1 | |
| 70123 | USATCO PANEL SAWS RPM: 2,200 - VACUUM MODEL M | 1 | |
| 70638 | LAGUNA TOOLS 20'' DRILL PRESS DP|20 TOUCHSCREEN FLOOR MODEL | 1 | |
| 111301 | SIG SELECTOR MODEL 8520C | 1 | |
| 125632 | MODEL 966A TABER OPTICAL MICROMETER - 200 POWER | 2 | |
| 129083 | MODEL 966A1 TABER OPTICAL MICROMETER - 100/200 POWER | 1 | |
| 144365 | Hios Right Angle Adapter - 1/4 F/Hex models (for VZ1820, VZ3012, VB1820 & VB3012) | 1 | |
| 145611 | Torque Cover - Black (for BF080 & BF120 models) | 1 | |
| 205997 | GRACO MONARK SS PUMP (MODEL 205997) | 1 | |
| 220256 | PPG Semco 220256 Metal 2.5 oz Model 250-A Sealant Gun Retainer | 3 | |
| 220279 | PPG Semco 220279 Model 195 Dasher 8 Rod | 1 | |
| 220538 | PPG Semco 220538 Model 252 Polyethylene 116 Orifice x 2.5 Long x 14 NPT Male Thread Standard Sealant Nozzle | 4 | |
| 220540 | PPG Semco 220540 Model 254 Polyethylene 18 Orifice x 2.5 Long x 14 NPT Male Thread Standard Sealant Nozzle | 1 | |
| 220542 | PPG Semco 220542 Model 410 Polyethylene 132 Orifice x 4 Long x 14 NPT Male Thread Standard Sealant Nozzle | 4 | |
| 220543 | PPG Semco 220543 Model 410 1 Long, 45 Bend Nozzle x 132 Orifice | 1 | |
| 220544 | PPG Semco 220544 Model 420 Polyethylene 116 Orifice x 4 Long x 14 NPT Male Thread Standard Sealant Nozzle | 8 | |
| 220545 | PPG Semco 220545 Model 420 1.5 Long, 45 Bend Nozzle x 132 Orifice | 1 | |
| 220548 | PPG Semco 220548 Model 430 Polyethylene 332 Orifice x 4 Long x 14 NPT Male Thread Standard Sealant Nozzle | 4 | |
| 220550 | PPG Semco 220550 Model 440 Polyethylene 18 Orifice x 4 Long x 14 NPT Male Thread Standard Sealant Nozzle | 4 | |
| 220552 | PPG Semco 220552 Model 600E Polyethylene 6-38 Long Sealant Gun Nozzle Extension | 1 | |
| 220553 | PPG Semco 220553 Model 620 Polyethylene 116 Orifice x 6 Long x 14 NPT Male Thread Standard Sealant Nozzle | 1 | |
| 220555 | PPG Semco 220555 Model 640 Polyethylene 18 Orifice x 6 Long x 14 NPT Male Thread Standard Sealant Nozzle | 1 | |
| 220556 | PPG Semco 220556 Model 640 3 Long, 30 Bend Nozzle x 18 Orifice | 1 | |
| 220557 | PPG Semco 220557 Model 820 Polyethylene 116 Orifice x 8 Threaded Long-Reach Sealant Application Nozzle | 2 | |
| 220559 | PPG Semco 220559 Model 840 Polyethylene 18 Orifice x 8 Threaded Long-Reach Sealant Application Nozzle | 1 | |
| 220561 | PPG Semco 220561 Model 1002 Polyethylene 116 Orifice x 10 Threaded Long-Reach Sealant Application Nozzle | 1 | |
| 220563 | PPG Semco 220563 Model 1004 Polyethylene 18 Orifice x 10 Threaded Long-Reach Sealant Application Nozzle | 1 | |
| 220564 | PPG Semco 220564 Model 1004 10 Long, 30 Bend Nozzle x 18 Orifice | 1 | |
| 220565 | PPG Semco 220565 Model 1010 Polyethylene 516 Orifice x 10 Threaded Long-Reach Sealant Application Nozzle | 2 | |
| 220568 | PPG Semco 220568 Model 8607 5-78 Long Nozzle x 116 x 14 Orifice | 2 | |
| 220569 | PPG Semco 220569 Model 8608 4 Long Nozzle x 116 x 14 Orifice | 1 | |
| 220570 | PPG Semco 220570 Model 8610 4-18 Long Ribbon Nozzle x 664 x 964 Orifice | 1 | |
| 220572 | PPG Semco 220572 Model 8613 5 Long Ribbon Nozzle x 364 x 38 Orifice | 2 | |
| 220574 | PPG Semco 220574 Model 8615 4 Long Ribbon Nozzle x 116 x 12 Orifice | 2 | |
| 220581 | PPG Semco 220581 Model 8630 4 Long Ribbon Nozzle x 18 x 1-34 Orifice | 1 | |
| 220582 | PPG Semco 220582 Model 8630-9 4-78 Long Ribbon Nozzle x 18 x 1-34 Orifice | 1 | |
| 220585 | PPG Semco 220585 Model 8642 4 Long Nozzle x 316 Orifice | 1 | |
| 220586 | PPG Semco 220586 Model 8643 4-38 Long Ribbon Nozzle x 18 x 34 Orifice | 3 | |
| 220587 | PPG Semco 220587 Model 8645 4-316 Long Ribbon Nozzle x 18 x 1 Orifice | 1 | |
| 220588 | PPG Semco 220588 Model 8646 3-1516 Long Ribbon Nozzle x 18 x 34 Orifice | 1 | |
| 220589 | PPG Semco 220589 Model 8648 3-58 x 5-316 Long Ribbon Nozzle x 18 x 34 Orifice | 3 | |
| 220606 | PPG Semco 220606 Model 8690 Polyethylene 332 Orifice x 9 Threaded Long-Reach Sealant Application Nozzle | 3 | |
| 220895 | PPG Semco 220895 Model 250-A & 550 Bulk Hose - Sold per Foot | 1 | |
| 220923 | PPG Semco 220923 Metal 12 oz Model 250-A Sealant Gun Retainer | 1 | |
| 220926 | PPG Semco 220926 Metal 8 oz Model 250-A Sealant Gun Retainer | 2 | |
| 220928 | PPG Semco 220928 Metal 6 oz Model 250-A Sealant Gun Retainer | 3 | |
| 226820 | PPG Semco 226820 Metal 6 oz Model 850-A Sealant Gun Retainer | 3 | |
| 228623 | PPG Semco 228623 Model 420 Polyethylene 116 Orifice x 4 Long x 14 NPT Male Thread Standard Sealant Nozzle | 1 | |
| 229682 | PPG Semco 229682 Model 550 20 oz O-Ring | 1 | |
| 229775 | PPG Semco 229775 Model 250ND & 550 20 oz Plastic Adapter | 1 | |
| 229890 | PPG Semco 229890 Model 550 2030 oz Seal | 1 | |
| 230274 | PPG Semco 230274 Model 850-20M Manual Metal 20 oz Sealant Gun | 1 | |
| 230492 | PPG Semco 230492 Model 195 20cc Dasher Rod | 1 | |
| 231145 | PPG Semco Model 388 ElectricPneumatic 20 oz SEMKIT Sealant Package Mixer | 1 | |
| 232280 | PPG Semco 232280 Model 120 Mini Dispensing Gun | 1 | |
| 232987 | PPG Semco 232987 Model 420 45 Bend, 2 Long Nozzle | 1 | |
| 233671 | PPG Semco 233671 Model 2000 315cc (110 Gallon) Threaded Lock Retainer Assembly | 1 | |
| 233672 | PPG Semco 233672 Model 550 20 oz. Threaded Lock Retainer Assembly | 1 | |
| 234535 | PPG Semco 234535 Model 285-E 220-Volt Electric SEMKIT Sealant Package Mixer | 2 | |
| 235490 | PPG Semco 235490 Model 285-B 20-Volt Battery Powered US Version SEMKIT Sealant Package Mixer | 3 | |
| 240020 | PPG Semco 240020 Model 250-AB Sealant Gun Repair Kit | 1 | |
| 513721 | INSPECTION LAMP, MODEL 2Z-24A UV-A LIGHT (BLACKLIGHT), MINIMUM POWER RATING OF 100 WATTS AND MUST PRODUCE A MINIMUM BLACK LIGHT INTENSITY OF 1200 AND A MAXIMUM OF 10000 MICROWATTS PER SQUARE CENTIMETER AT 15 INCHES (381 MM) (MAGNAFLUX OR EQUIVALENT) | 1 | |
| 630043 | AERO TESTER (P/N 630043. MODEL 20-ATM-C ) | 1 | |
| 700000 | PPG Semco 700000 Model 420 30 Bend, 2 Long Nozzle | 1 | |
| 700010 | PPG Semco 700010 Model 420 20 Bend, 2 Long Nozzle | 1 | |
| 700034 | PPG Semco 700034 Model 220 90 Bend, 2 Long Nozzle | 1 | |
| 700036 | PPG Semco 700036 Model 420 30 Bend, 1 Long Nozzle | 1 | |
| 2004007 | Model 2625 20' Cargo End Load, Cargo capacity 30,000 lbs, Pallet capacity (2) 96" x 125" or (1) 96" x 240" | 1 | |
| 2004084 | Model 3083 20' Roller Deck Side Load Pallet Trailer. Pallet capacity: (2) 96"x125" OR (1) 96"X240" pallet. Spring loaded stops, grip strut walkways, 30,000 lbs. cargo capacity, heavy-duty applications. | 1 | |
| 2007205 | PS300 (3 phase). Works at: - EC1 EU Model (400VAC input, 3 phase + Neutral + E) - EC2 US Model (200VAC input, 3 phase + E) - Includes: 3 metre (10ft) input cable (without Plug), Padded jacket and carton - Exclusions: output lead / input plug | 1 | |
| 2016678 | PV45-1 (208-480V input) 90kVA, 400 Hz Solid-State GPU, USA Model. Specify one of the following input voltages when ordering: 208, 240, 400, 480 - x2 Cable horns (no cable tray) - Exclusions: input lead / output lead / shipping crate | 1 | |
| 2026599 | INFLATING VALVE ADAPTER, NITROGEN – 3000 PSI ,MODEL: SKU 2026599 CATEGORIES STRUT & TIRE TOOLS, TIRE & STRUT TOOLS | 1 | |
| 4133139 | TITHIL MODEL FILL-RITE 20GPM 12V DC PUMP | 1 | |
| 7253546 | WIKA 7253546 MODEL CPH 6200 HAND-HELD PRESSURE INDICATOR 1 CHANNEL VERSION | 1 | |
| 9122083 | POWERLINK CABLE CL/SC/6 MODEL 9122083 | 5 | |
| 19950195 | RECORDER (MODEL 620HRT) (V60795) | 1 | |
| 50042311 | horno HERAEUS Modelo UT20, S/N 40206441 | 1 | |
| 81620002 | *OBSOLETE* 13209/1-TOOL CASE, BASE MODEL | 1 | |
| 84132819 | TOOL:SPECIAL PURPOSE TYPE: TURBINE BORESCOPE POWER: BATTERY SIZE:NA MATL:NA GE TURBINE BORESCOPE TOOL MODEL XLVUD6120 PART NO 1850A4268 MANUFACTURER PART NUMBER(M) - 1850A4268; MANUFACTURER(MA) - GE - GENERAL ELECTRIC | 1 | |
| 84400054 | CIRCUIT BREAKER, MS3320-10, PUSH-PULL, SINGLE POLE, SMALL MODEL, NO SIGNAL CONTACT, 10A | 1 | |
| 18910480000 | TEST SET - DIGITAL AIR DATA (MODEL TTU-205D). RVSM COMPLIANCE IS ACHIEVABLE ON TTU-205D BY USING ENHANCED CALIBRATION CAPABILITY (EEC) UPGRADE. | 1 | |
| 18910920000 | TEST SET - DIGITAL AIR DATA (MODEL KTS-2000). RVSM COMPLIANCE. 3 OPTIONS: P/N 18910920000 (120VAC, 60HZ); P/N 18910920001 (120VAC, 400HZ); AND P/N 18910920002 (220VAC, 50HZ) | 2 | |
| 9473-010 | JACK AXLE - MAINNOSE GEAR (20 TONS) MODEL-9473-010 | 3 | |
| 966A | OPTICAL MICROMETER - 200 POWER, MODEL 966A | 5 | |
| AC500-105 | EXHAUST PLUGS (520 and 560 models) (set of 4) | 1 | |
| AFNDT-3128AL | BOEING ALL AIRCRAFT MODELS 51-00-16 PT 6 FIG 3. MULTIHOLE STANDARD WITH 11 HOLES SIZES: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1.00". EDM NOTCHES: .020 x .020 X .005" +/-0.002 wide on one side and .030 x .030 .005" +/-0.002 wi... | 1 | |
| AN16-P2D-R | Adaptor 16 Pin, reflection coil configuration probes with 12 Pin LEMO connector to Nortec 500/ 1000 or 2000 instrument (16 Pin LEMO)Model: L16-L12-R & ARN16-H22 | 1 | |
| ARTPX-008 | Type: Rotating Probe Head - Straight Section; Model: ARTPX = Adjustable Rotating Probe for Mini Scanners, Reflection D coils (Driver Pick-up), X Type; Item Diameter: 0.375in (10mm); Tube ID: 0.375-0.437in (9.53-11.1mm); Coil: 1000= 100-2000 kHz; Poly ... | 1 | |
| ARTPX-029 | Type: Rotating Probe Head - Straight Section; Model: ARTPX = Adjustable Rotating Probe for Mini Scanners, Reflection D coils (Driver Pick-up), X Type; Item Diameter: 0.750in (19mm); Tube ID: 0.750-0.875in (19.05-22.23mm); Coil: 1000= 100-2000 kHz; Pol... | 1 | |
| ARTPX-030 | Type: Rotating Probe Head - Straight Section; Model: ARTPX = Adjustable Rotating Probe for Mini Scanners, Reflection D coils (Driver Pick-up), X Type; Item Diameter: 0.875in (22mm); Tube ID: 0.875-1.000in (22.23-25.4mm); Coil: 1000= 100-2000 kHz; Poly... | 1 | |
| AT120D/FF-IV96G | OPTICAL ADAPTER FOR SPECIFIC VISION OF 6.0 MM. MODEL: AT120D/FF-IV96G | 1 | |
| AT120S/FF-IV96G | OPTICAL ADAPTER FOR SPECIFIC VISION OF 6.0 MM. MODEL: AT120S/FF-IV96G | 1 | |
| AXA 2200 | TOOL. MODEL NUMBER: 3GSF-200/43-N | 1 | |
| B737-160 | INTAKE PLUGS (folding), 200 models: small JT8D - SET OF 2 | 1 | |
| B737-165 | EXHAUST PLUGS (folding), 200 models: small JT8D - SET OF 2 | 1 | |
| B737-255 | BYPASS & EXHAUST PLUGS, folding donut ring type, 600-900 models (NG / NexGen), Short Exhaust Nozzle mod, NSN: 1420-01-646-6551, includes storage bag (per engine) (set of 6) | 1 | |
| B747-106 | INTAKE COVERS, E-4, -200, and -300 models, GE CF6-50 engines (set of 4) | 1 | |
| BR-2025 | HUCK MODEL 2025 FASTENER INSTALLER | 1 | |
| CC11-HP2 | PITOT COVER (2014 models & up, short L-type) | 1 | |
| CC11-HP8 | PITOT COVER (2016 models & up, long L-type) | 1 | |
| CDRR2005360KD | DEMO MODEL CDRR2005360 | 1 | |
| CDRR2005KD | DEMO MODEL CDRR2005 | 1 | |
| CT-200 | DUKANE CALIBIRATION KIT FOR MODEL TS-200 | 2 | |
| DLT20MAPW0000 | POWER UNIT- MODEL 20 | 6 | |
| DLT20PSKT3002 | MODEL 20 SIZE: 08 STD | 3 | |
| E300-006 | CANOPY COVER, Extra 200 models | 1 | |
| E300-830 | TRAVEL COVER, Light Weight Canopy Cover, Extra 200 models | 1 | |
| EPOCH IIB | EPOCH IIB, MODEL 2200 (WITH RF OPTION) O EPOCH III MODEL 2300 | 1 | |
| EPOCHIII MODEL 2300 | EPOCH IIB, MODEL 2200 (WITH RF OPTION) O EPOCH III MODEL 2300 | 1 | |
| EU-15 | COIL EXTENSION CORD (SNAIL) FOR 220V, UP TO 20M LONG MODEL EPA EU-15 | 1 | |
| EU-25 | COIL EXTENSION CORD FOR 220V, UP TO 30M LONG MODEL EPA EU-25 | 1 | |
| F16-040 | CANOPY/NOSE COVER (C-Model, single seat models), NSN: 1560-01-420-9453 | 1 | |
| F16-200 | EXHAUST COVER, block 32 models, PW F100-220 engine | 1 | |
| F16-201 | EXHAUST PLUG, block 32 models, PW F100-220 engine | 1 | |
| FC1200-1 | FoxCart Power Cart: Model 1200 | 2 | |
| FC2000-1 | FoxCart Power Cart: Model 2000 | 3 | |
| FI-80 | MODEL FI-80 LED SN 5D200020000140 (MANUFACTURER DILLON FORCE) | 1 | |
| FR4210D | TITHIL MODEL FILL-RITE 20GPM 12V DC PUMP | 1 | |
| FoxAir 60 | Model FoxAir/60HZ (208-253VAC-Single Phase) | 1 | |
| G120-110 | ENGINE COVER, 120A model | 1 | |
| G120-115 | INSULATED ENGINE COVER, 120A model | 1 | |
| G120-120 | PROPELLOR/SPINNER COVER, 2 blade, 120A model | 1 | |
| G120-200 | WING COVERS, WINTER USE, 120A model (set of 2) | 1 | |
| G120-205 | WING COVERS, ALL YEAR USE, 120A model (set of 2) | 1 | |
| G120-300 | HORIZONTAL STABILIZER COVERS, WINTER USE, 120A model (set of 2) | 1 | |
| G120-305 | HORIZONTAL STABILIZER COVERS, ALL YEAR USE, 120A model (set of 2) | 1 | |
| G120-400 | EMPENNAGE COVER, WINTER USE, 120A model | 1 | |
| G120-405 | EMPENNAGE COVER, ALL YEAR USE, 120A model | 1 | |
| G200-100 | ENGINE COVER SET, G200 model (set of 4) | 1 | |
| GB722 | HUCK MODEL 2025 FASTENER INSTALLER | 4 | |
| GE-FQAP-302B | HIGH SPEED EDDY CURRENT FIXTURE FOR HOCKING HIGH SPEED ROTOR (MODEL 33A022 AND 33A106) NORTEC SPITFIRE 2000 ROTATOR P/N 9020206.00 | 1 | |
| GIL-000 | CANOPY COVER (snap/belly strap type), model 200 | 1 | |
| GIL-001 | CANOPY COVER (belly strap type), model 200 | 1 | |
| GIL-002 | CANOPY COVER, model 202 | 1 | |
| GIL-100 | ENGINE PLUG SET, model 200 (set of 3) | 1 | |
| GIL-101 | CARB INLET PLUG, model 200 | 1 | |
| GIL-120 | PROPELLOR/SPINNER COVER, 3 blade, model 200 | 1 | |
| GIL-125 | INSULATED PROPELLOR/SPINNER COVER, 3 blade, model 200 | 1 | |
| GIL-130 | PROPELLOR/SPINNER COVER, 2 blade, model 200 | 1 | |
| GIL-135 | INSULATED PROPELLOR/SPINNER COVER, 2 blade, model 200 | 1 | |
| GIL-140 | PROPELLOR/SPINNER COVER, 3 blade, model 202 | 1 | |
| GIL-145 | INSULATED PROPELLOR/SPINNER COVER, 3 blade, model 202 | 1 | |
| GIL-220 | WING COVERS, WINTER USE, model 200 (set of 2) | 1 | |
| GIL-222 | WING COVERS, WINTER USE, model 202 (set of 2) | 1 | |
| GIL-225 | WING COVERS, ALL YEAR USE, model 200 (set of 2) | 1 | |
| GIL-227 | WING COVERS, ALL YEAR USE, model 202 (set of 2) | 1 | |
| GIL-310 | HORIZONTAL STABILIZER COVERS, WINTER USE, model 200 (set of 2) | 1 | |
| GIL-312 | HORIZONTAL STABILIZER COVERS, WINTER USE, model 202 (set of 2) | 1 | |
| GIL-315 | HORIZONTAL STABILIZER COVERS, ALL YEAR USE, model 200 (set of 2) | 1 | |
| GIL-317 | HORIZONTAL STABILIZER COVERS, ALL YEAR USE, model 202 (set of 2) | 1 | |
| GIL-500 | PITOT COVER, model 200 | 1 | |
| GIL-800 | TRAVEL COVER, Light Weight Canopy Cover (snap/belly strap type), model 200 | 1 | |
| GIL-810 | TRAVEL COVER, Light Weight Canopy Cover (belly strap type), model 200 | 1 | |
| GIL-820 | TRAVEL COVER, Light Weight Canopy Cover, model 202 | 1 | |
| GMIWIR-SB2-A-2 | INFRA-RED SYSTEM MODEL SB2. 2 LAMPS, 2000 W | 1 | |
| GMIWVR011 | ROLLING VACUUM PUMP WITH TANK - MODEL 25 M3 /H - MONO PHASE 220 VAC | 1 | |
| GMIWVR013 | ROLLING VACUUM PUMP WITH TANK - MODEL 25 M3 /H - MONO PHASE 220 VAC | 1 | |
| HG 2620 E | STEINEL MODEL HG 2620 E HEAT GUN | 1 | |
| HNDT 700P13A | • SPOT PROBE, HOCKING MODEL: HNDT 700P13A, 200 HZ - 200 KHZ FREQUENCY, SHIELDED, 0.50 IN (12.7 MM), ABSOLUTE−REFLECTION | 1 | |
| HOCKING 33A130 | CONNECTION CABLE FOR DIFFERENTIAL REFLECTION PROBES, HOCKING MODEL PHASEC 2200, LEMO 12W TO LEMO 4W CONNECTORS | 1 | |
| HT-300-CW | SERIES 300 COMPRESSOR WASH SYSTEM (AIRCRAFT MODELS: BELL - 204;AIRBUS - AS350) | 3 | |
| HT-900-NC | SERIES 300 COMPRESSOR WASH SYSTEM (AIRCRAFT MODELS: BELL - 204;AIRBUS - AS350) | 1 | |
| HT-920B-1-HT-TOOL-YELL | TOOL, ELEC HOT AIR 230VAC MODEL HT920B | 1 | |
| IFR 1-20 Attenuator | Model 1-20 Attenuator | 1 | |
| IV9420G | OLYMPUS MODEL NUMBER : IPLEX GX/GT IV9420G | 1 | |
| IV9620RX | OLYMPUS MODEL IV9620RX BORESCOPE OR EQUIVALENT (IF NECESSARY) | 1 | |
| IV9675N | VIDEOSCOPE,IV9675N,OLYPUS,320X310X180MM MANUFACTURER NAME : OLYPUS MODEL NUMBER : IV9675N DIMENSION SIZE : 320 MM X 310 MM X 180 MM | 1 | |
| J7322 | STANLEY PROTO J7322 1/2-INCH DRIVE DEEP IMPACT SOCKET, 11/16-INCH, 12 POINT (MODEL NUMB: J7322 , ASIN: B00209J6OU) | 2 | |
| JL-2PLUS | BATTERY CHARGER WITH 220V AC CABLE OF NP-L7S LI-ION BATTERY FOR IPLEX NX: MODEL NO. JL-2PLUS | 1 | |
| K-2304 | KIT, BALL LOK-T REPLACEMENT. (MULTI-HEAD TOW BAR MODEL:01-1201-0010) | 4 | |
| KC135-206 | BYPASS VENT, EXHAUST PLUGS AND NOZZLE CAP COVERS, 4 engines, R-model, CFM56 engines (set of 20) | 1 | |
| KIT E | KIT E (W/CASE) MODELS 47/206/204/205/212 SPLINE MEASURING KIT (BELL 206B) | 1 | |
| L320-405 | EMPENNAGE COVER (Tailboom, Vertical & Horiz Stabilizers), 320 & 360 models, WINTER USE | 1 | |
| L320-410 | EMPENNAGE COVER (Tailboom, Vertical & Horiz Stabilizers), 320 & 360 models, ALL YEAR USE | 1 | |
| LA4-125 | EXHAUST PLUGS, LA4-200 model (set of 2) | 1 | |
| LST21 R550 | 8423 0361 70 - ORBITAL SANDER, EXTRACTION MODEL, SELF SUCTION, 0.27 HP, 12000 RPM | 1 | |
| M1200-R | Replacement Blade Set Only for Model M1200 Snips | 1 | |
| M20-050 | EXTENDED CANOPY COVER (except M20C models) | 1 | |
| M20-051 | EXTENDED CANOPY COVER (M20C models) | 1 | |
| M20-240 | WING COVERS (M20A models), WINTER USE (set of 2) | 1 | |
| M20-245 | WING COVERS (M20A models), ALL YEAR USE (set of 2) | 1 | |
| M20-910 | HEATSHIELD SET (models M20C, M20D, M20E, '65-'75) (set of 5) | 1 | |
| M20-913 | HEATSHIELD SET (models M20C, M20F, '76 & up) (set of 5) | 1 | |
| M20-916 | HEATSHIELD SET (model M20F '66-'75, M20G) (set of 7) | 1 | |
| M20-921 | HEATSHIELD SET (long slope windshield for models M20F '66-'75 & M20G) (set of 7) | 1 | |
| M201-001 | CANOPY/ENGINE COVER (201 models) | 1 | |
| M201-061 | EXTENDED CANOPY/ENGINE COVER (201 MODELS) | 1 | |
| M201-064 | EXTRA EXTENDED CANOPY/ENGINE COVER COMBINATION (runs up on dorsal)(201 models) | 1 | |
| M201-104 | FRESH AIR VENT PLUGS (201, 231 MODELS) (set of 2) | 1 | |
| M201-220 | WING COVERS (201, 205, 231, MSE models), WINTER USE (set of 2) | 1 | |
| M201-225 | WING COVERS (201, 205, 231, MSE models), ALL YEAR USE (set of 2) | 1 | |
| M201-240 | WING COVERS (early 201 models, "flat" wingtip), WINTER USE (set of 2) | 1 | |
| M201-245 | WING COVERS (early 201 models, "flat" wingtip), ALL YEAR USE (set of 2) | 1 | |
| M201-270 | WING COVERS (201, 205, 231 models), hail protection type, WINTER USE (set of 2) | 1 | |
| M201-271 | WING COVERS (201, 205, 231 models), hail protection type, ALL YEAR USE (set of 2) | 1 | |
| M201-300 | TAILCONE COVER (201, 231, 252, MSE models) | 1 | |
| M201-805 | TRAVEL COVER, Light Weight Canopy/Engine Cover (M201 models) | 1 | |
| MAU-102 | ENGINE COVER, M-4/5-220C models (open bottom) | 1 | |
| MAU-103 | INSULATED ENGINE COVER, M-4/5-220C models | 1 | |
| MCR-060 | CANOPY COVER, CR120 model | 1 | |
| MCR-870 | TRAVEL COVER, Light Weight Canopy Cover, CR120 model | 1 | |
| MODEL 206-375 | MODEL 206-375 HYDRAULIC TOOL | 1 | |
| MODEL 2200 | EPOCH IIB, MODEL 2200 (WITH RF OPTION) O EPOCH III MODEL 2300 | 1 | |
| MODEL 966A1 | MICROMETER - OPTICAL, (UNIVERSAL KIT) CONTAINS EQUIPMENT FOR BOTH MODEL 966 (100 POWER, DEPTHS MEASUREMENT UP TO 0.6650", HEIGHT ABOVE SURFACE 0.100", TRANSPARENT MATERIAL UP TO 0.9975'', AND ACCURACY /-.0005") AND MODEL 966A (200 POWER, DEPTHS MEASUREME | 4 | |
| MRC006507 | MODEL A8-AF RADOME MOISTURE METER 220 VAC | 5 | |
| MSTC-1000/2000 | OCTAGON MEASURING SCALE & TAPE CALIBRATION SYSTEM MODEL MSTC-1000/2000 | 1 | |
| N0320222 | HOSE (MODEL HYCOMHT2000- E/1-D) | 1 | |
| N03202222R0101 | HOSE(MODEL HYCOMHT2000-E/1-D)NETHERLAND | 1 | |
| N4147100 | IPLEX NX - MODEL: IV900N-BX. ACCESSORIES MUST BE INCLUDED. NEW SURPLUS CONDITION. ACCESSORIES: AT80D/FF-IV94N, AT120D/NF-IV94N, IV9450N-MDS, AT100S/FF-IV94N, AT70D/70D-IV94N AND AT50S/50S-IV94N. | 3 | |
| N4153100 | OLYMPUS MODEL NUMBER : IPLEX GX/GT IV9420G | 1 | |
| NDT1084 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-.096 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-.5625 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.09375 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.122 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.125 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.127 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.129 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.156 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 2 | |
| NDT1084-0.157 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.161 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.200 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.218 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.219 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 2 | |
| NDT1084-0.234 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.265 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.281 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.297 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.328 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.359 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.391 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.422 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.453 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.469 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.484 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.531 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.562 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.563 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.578 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.594 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.600 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.625 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 2 | |
| NDT1084-0.630 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.640 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.656 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.675 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.688 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.689 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.695 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.700 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.719 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.750 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 2 | |
| NDT1084-0.787 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.813 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.875 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.906 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.938 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.XXX | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0125 | BOEING REFERENCE STANDARD 737 PART 6 51-00-00 PAGE 9 FIGURE 3, 777 PART 6 51-00-02 PAGE 7 FIGURE 3,777-200/300 PART 6 51-00-02 PAGE 9 FIGURE 3. MATERIAL: 2024-T3. PROCUDURES VARY WITH PLANE MODEL. ALL MODELS FOR THIS REFERENCE STANDARD. PROVIDE CUSTOM | 1 | |
| NDT1084-1.000 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.062 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.100 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.124 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.125 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 2 | |
| NDT1084-1.187 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.200 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.250 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.300 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.312 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.3605 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.375 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 2 | |
| NDT1084-1.400 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.437 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.500 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.625 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 2 | |
| NDT1084-1.750 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.875 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.940 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-1.9855 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-11.5MM | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-14.4MM | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-14.6MM | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-17.4MM | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-17.5MM | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-2.000 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-2.250 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-27.6MM | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1088-050/063 | BOEING REFERENCE STANDARD 737 Part 6 53-30-24 Page 6 Figure 2, 747 Part 6 53-30-17 Page 7 Figure 1, 757 Part 6 53-00-13 Page 6 Figure 2. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and | 1 | |
| NDT1088-062/071 | BOEING REFERENCE STANDARD 737 Part 6 53-30-24 Page 6 Figure 2, 747 Part 6 53-30-17 Page 7 Figure 1, 757 Part 6 53-00-13 Page 6 Figure 2. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and | 1 | |
| NDT1088-072/050 | BOEING REFERENCE STANDARD 737 Part 6 53-30-24 Page 6 Figure 2, 747 Part 6 53-30-17 Page 7 Figure 1, 757 Part 6 53-00-13 Page 6 Figure 2. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and | 4 | |
| NDT1088-095/071 | BOEING REFERENCE STANDARD 737 Part 6 53-30-24 Page 6 Figure 2, 747 Part 6 53-30-17 Page 7 Figure 1, 757 Part 6 53-00-13 Page 6 Figure 2. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and | 1 | |
| NDT1088-112/100 | BOEING REFERENCE STANDARD 737 Part 6 53-30-24 Page 6 Figure 2, 747 Part 6 53-30-17 Page 7 Figure 1, 757 Part 6 53-00-13 Page 6 Figure 2. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and | 2 | |
| NDT1088-133/071 | BOEING REFERENCE STANDARD 737 Part 6 53-30-24 Page 6 Figure 2, 747 Part 6 53-30-17 Page 7 Figure 1, 757 Part 6 53-00-13 Page 6 Figure 2. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and | 1 | |
| NDT1088-144/050 | BOEING REFERENCE STANDARD 737 Part 6 53-30-24 Page 6 Figure 2, 747 Part 6 53-30-17 Page 7 Figure 1, 757 Part 6 53-00-13 Page 6 Figure 2. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and | 3 | |
| NDT1088-156/100 | BOEING REFERENCE STANDARD 737 Part 6 53-30-24 Page 6 Figure 2, 747 Part 6 53-30-17 Page 7 Figure 1, 757 Part 6 53-00-13 Page 6 Figure 2. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and | 1 | |
| NDT1088-180/180 | BOEING REFERENCE STANDARD 737 Part 6 53-30-24 Page 6 Figure 2, 747 Part 6 53-30-17 Page 7 Figure 1, 757 Part 6 53-00-13 Page 6 Figure 2. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and | 1 | |
| ONX-CATV-COX-T2-85204 | ONX-CATV-COX-T2-85204;ONX CATV TECH2 COX model D3.1 SW Diplexer 85/204 1.2/1.2G 620-IPX | 1 | |
| ONX-CATV-COX-T2D31 | ONX-CATV-COX-T2D31;ONX CATV TECH2 COX model D3.1 SW Diplexer 42/85 1.0/1.2G 620-IPX | 1 | |
| ONX-CATV-COX-T3-85204 | ONX-CATV-COX-T3-85204;ONX CATV TECH3 COX model D3.1 SW Diplexer 85/204 1.2/1.2G 620-TSX | 1 | |
| ONX-CATV-COX-T3D31 | ONX-CATV-COX-T3D31;ONX CATV TECH3 COX model D3.1 SW Diplexer 42/85 1.0/1.2G 620-TSX | 1 | |
| P2K-615A-05 | DATA LOADER - PORTABLE, ARINC-615A S CAPABLE WITH MASS STORAGE DEVICE. TOOL MODEL NAME IS PMAT2000 | 2 | |
| P2K-615A-06 | LOADER - DATA, ARINC 615/615A (MODEL IS PMAT 2000)必须包含线缆P/N：9471M34G01 1根 | 3 | |
| P2K-ABF-02 | TELEDYNE MODEL: PMAT2000 | 6 | |
| PW-100 | PW 2000 Series QEC OFF-LINK ENGINE LONG-TERM STORAGE "Rain Cap" Style COVER, PW2040, PW2060 models | 1 | |
| PWA 33732 | MODEL # AH-2060 | 3 | |
| R10009-A320 | A320 APU PLUG H/S APU MODELS 4500001B OR 4500001A | 1 | |
| R80 | CLEANER, VACUUM - CABIN INTERIOR 115V/400 HZ (OR 60 HZ) COMPACT MODEL 20" X 9" X 12" INCLUDES LONG CORD COMPLETE SET OF (RIVERS AIRCRAFT VACUUM CO.) | 1 | |
| RB KIT B | Model 206 Spline Measuring Kit | 2 | |
| RB KIT C | Model 204/205/212 Spline Measuring Kit | 1 | |
| RB KIT D | Model 47/206 Spline Measuring Kit | 1 | |
| RB KIT E | Models 47/206/204/205/212 Spline Measuring Kit | 3 | |
| RX20 | GAUGE,AIKOH MODEL RX-20 PUSH PULL DI | 1 | |
| SB18-120 | Sanding Belt - 120 Grit - 5/8" x 18" - Fits DOTCO Model 12L2384-B1 | 1 | |
| SH2700 | SUPEROLL SH SERIES MODEL NUMBER SH7200 (OEM HUTCHISON TOOLS SALES (HTS)) | 1 | |
| SPC-100 | ENGINE INLET PLUGS (Early Models, 2015 & prior) (set of 5) | 1 | |
| SPC-105 | ENGINE INLET PLUGS (Late Models, 2016 & up) (set of 5) | 1 | |
| SR-2024 | 24X20 GAUGE BENCH MODEL SLIP ROLL | 1 | |
| SR200-MASK | VOLLMASKE MODELL SR200 AIRLINE | 1 | |
| SWE102 | TORQUE MULTIPLIER (0 TO 2000 FT LBS) (SWEENEY MODEL 102) | 1 | |
| SWE8202A | SWEENEY MODEL 8202A | 4 | |
| TB20-110 | ENGINE INLET PLUGS, TB20/21 models (set of 2) | 1 | |
| TB20-111 | ENGINE INLET PLUGS, TB9/10/200 models (set of 2) | 1 | |
| TLD 120 KVA GPU | GPU- 120 KVA GPU MODEL TLD 120 KVA GPU | 1 | |
| TORKEL 860 | INDUSTRIAL BATTERY LOAD UNIT SUITABLE FOR MEASURING BATTERY VOLTAGE UPTO 420 V MODEL: ABB, TORKEL 720 (TORKEL 860) | 1 | |
| TS-420 | TEST SET (LIGHT SYSTEM) MODEL TS-420 INTERNATIONAL VERSION 4-1020-202 | 2 | |
| TS-421 | TEST SET (LIGHT SYSTEM), MODEL TS-420 | 4 | |
| TS200 | ULTRASONIC TEST SET MODEL TS200 | 22 | |
| TS420 | TEST SET (LIGHT SYSTEM) MODEL TS-420 (INTERNATIONAL VERSION) | 2 | |
| TS421 | TEST SET (LIGHT SYSTEM) MODEL TS-420 (INTERNATIONAL VERSION) | 4 | |
| U8800073 | POWERLINK CABLE CL/SC/6 MODEL 9122083 | 2 | |
| V1020 | HELICARRIER MODEL V\020 | 1 | |
| VL3-405 | EMPENNAGE COVER (Tailboom, Vertical & Horiz Stabilizers), 320 & 360 models, WINTER USE | 1 | |
| VL3-410 | EMPENNAGE COVER (Tailboom, Vertical & Horiz Stabilizers), 320 & 360 models, ALL YEAR USE | 1 | |
| WIL-115 | ENGINE COVER, Lycoming engine (2000 model) | 1 | |
| XLVUD6120 | SPECIAL PURPOSE TYPE:TURBINE BORESCOPE POWER:BATTERY SIZE:NA MATL:NA GE TURBINE BORESCOPE TOOL MODEL: XLVUD6120 PART NO: 1850A4268 MANUFACTURER: GE | 2 | |
| Z2021-PROP | MODEL 2020PL PROBALANCER ANALYZER | 2 | |
| Z601-040 | CANOPY COVER, CH-200 model | 1 | |
| Z601-840 | TRAVEL COVER, Light Weight CANOPY COVER, CH-200 model | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
