| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| J32084-17 | Lead In | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| "C27051-29 | LOCKOUT SET - LEADING EDGE SLATS AND KRUEGER FLAPS ACTUATOR | 26 | |
| (CALIB) 98A55307577000 | SLING - LEADING EDGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A55307577001 | SLING SLING-LEADING EDGE LOWER, VERTI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D55307531001 | SLING SLING - DORSAL FIN, LEADING EDG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A27017-41 | SLING LEADING EDGE SLATS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C27051-1 | LOCK SET - LEADING EDGE SLAT AND KRUEGER FLAP ACTUATORS (CALIBRATION) | 1 | |
| 000-11029-9 | LEADING EDGE FORMER | 1 | |
| 1-388408-3 | LEAF HINGE LOWER AFT LEADING EDGE | 1 | |
| 101-00907 | LEAD ADAPTER (TOOLING). | 10 | |
| 101-01001 | GROUND LEAD (BARFIELD INC.) | 1 | |
| 101-01007 | GROUND LEAD (BARFIELD INC.) | 1 | |
| 101-01010 | BANANA LEAD PAIR (BARFIELD INC.) | 3 | |
| 101-01012 | TEST LEADS, BANANA PLUG TO ALLIGATOR CLIP (BARFIELD INC.) | 8 | |
| 11-10786-1 | LEAD POLISHING | 4 | |
| 11-4733 | INPUT TEST LEAD | 1 | |
| 11-6196 | LEADS, (INPUT) | 1 | |
| 11-8950-2 | HIGH VOLTAGE IGNITION LEAD TESTING TOOL | 1 | |
| 115940010-1IF | LEADING EDGE TEMPLATE | 1 | |
| 115940010-2IF | LEADING EDGE TEMPLATE | 1 | |
| 115940020-1IF | LEADING EDGE TEMPLATE | 1 | |
| 115940020-2IF | LEADING EDGE TEMPLATE | 1 | |
| 121904 | LEADING WRENCH | 1 | |
| 127070-150mm | Red leads pin size 20 | 1 | |
| 127071-150mm | Green leads pin size 22 | 1 | |
| 127074-150mm | Red leads pin size 20 | 1 | |
| 127078-300mm | Red leads pin size 20 | 1 | |
| 127079-300MM | GREEN LEADS PIN SIZE 22 | 1 | |
| 127079-300mm | Green leads pin size 22 | 1 | |
| 127082-300mm | Red leads pin size 20 | 1 | |
| 129141 | TEST LEAD KELVIN | 1 | |
| 129439 | MULTI-PIN CONNECTOR TEST LEAD KIT | 1 | |
| 129520B | MULTI-PIN MASTER TEST LEAD KIT (ADAPTIVE INTERCONNECT ELECTRONICS INC) | 3 | |
| 16MIT65B04017 | WRENCH - DRIVE UNIT, LEADING EDGE | 1 | |
| 170-62020-801-11H1 | SLING, LEFT-HAND LEADING EDGE, HORIZONTAL STABILIZER | 3 | |
| 170-62020-802-11H1 | SLING, RIGHT-HAND LEADING EDGE, HORIZONTAL STABILIZER | 3 | |
| 170-62060-401-11H1 | SLING, LEFT-HAND LEADING EDGE, HORIZONTAL STABILIZ | 8 | |
| 170-62060-402-11H1 | SLING, LEFT-HAND LEADING EDGE, HORIZONTAL STABILIZ | 7 | |
| 170-63070-801-11 | VERTICAL SLING ADAPTER LEADING EDGE | 1 | |
| 170-63080-801-11H1 | SLING ADAPTER, LEADING EDGE, VERTICAL STABILIZER | 5 | |
| 170T05550-401 | TOOL - RIGGING, LEADING EDGE SLATS | 3 | |
| 17MIT65B04017 | LOCK ASSEMBLY - LEADING EDGE FLAP DRIVE | 9 | |
| 186A1001-16 | LEADING EDGE | 1 | |
| 186A1001-24 | LEADING EDGE | 1 | |
| 186A1001-4 | LEADING EDGE | 1 | |
| 186A1001-8 | LEADING EDGE | 1 | |
| 186A1001Y24 | LEADING EDGE | 1 | |
| 190E2G0001 | ADAPTER, LEADING EDGE SLING-VERTICAL STABILAZER | 2 | |
| 190E2G0002 | SLING, LEADING EDGE -HORIZONTAL STABILIZ-ER | 2 | |
| 190T05560-401 | TOOL - RIGGING, LEADING EDGE SLATS | 2 | |
| 196T07622-401 | COVER, NACA-VERT STAB LEADING EDGE | 1 | |
| 196T07640-401 | COVER, NACA-VERT STAB LEADING EDGE | 1 | |
| 196T08520-401 | TOOL, RIGGING- LEAD-ING EDGE SLATS | 1 | |
| 1SF4719-501 | LEADING EDGE SLAT LOCK | 1 | |
| 615 | HF Stub Mast Lead In | 3 | |
| 6982 | PROPELLER DE-ICER Wire Element - Integral Lead | 3 | |
| 380565 | TEST LEADS W/KELVIN CLIPS FOR 380580 (EXTECH) | 1 | |
| 759630 | TOOL COMPONENT LEAD CUTTING | 1 | |
| 2006422 | Coolspool 17 - Includes: Padded jacket and carton - Exclusions: input lead / output lead | 1 | |
| 2006636 | GPU 2400 - Includes: Padded jacket and carton - Exclusions: input lead / output lead | 1 | |
| 2007203 | PS100 - Includes: 2 metre (6.5ft) input cable (without Plug), Padded jacket and carton - Exclusions: output lead / input plug | 1 | |
| 2007204 | PS30 - Includes: Padded jacket and carton - Exclusions: input lead / output lead | 1 | |
| 2007205 | PS300 (3 phase). Works at: - EC1 EU Model (400VAC input, 3 phase + Neutral + E) - EC2 US Model (200VAC input, 3 phase + E) - Includes: 3 metre (10ft) input cable (without Plug), Padded jacket and carton - Exclusions: output lead / input plug | 1 | |
| 2007208 | PS50M - Includes: Padded jacket and carton - Exclusions: input lead / output lead | 1 | |
| 2011691 | Input Lead - 2m (6.5ft) - Socket: IEC C13 - Plug: US (Type B) | 1 | |
| 2011692 | Input Lead - 2m (6.5ft) - Socket: IEC C19 - Plug: US (Type B) (Rewireable) | 1 | |
| 2016678 | PV45-1 (208-480V input) 90kVA, 400 Hz Solid-State GPU, USA Model. Specify one of the following input voltages when ordering: 208, 240, 400, 480 - x2 Cable horns (no cable tray) - Exclusions: input lead / output lead / shipping crate | 1 | |
| 2016691 | PV45-1 (400V) EU Model. 400V input - Cable tray (no cable horns) - Exclusions: input lead / output lead / shipping crate | 1 | |
| 2017428 | Coolspool 29 - Includes: Padded jacket and carton - Exclusions: input lead / output lead | 1 | |
| 2017431 | GPU 1500/40: - Includes: Padded jacket and carton - Excludes: Input and Output Leads | 1 | |
| 2018114 | Input Extension Lead for EC1 - 30m (98.5ft) - 5C x 6sqmm - Plug and Socket: Mennekes 400V, 32 Amps, 3 phase, 5 pole, 6H, red | 1 | |
| 2018122 | Combination 300 EC1 (400V, 3-phase + N + E) - Includes: 10m (33ft) wired input lead with plug - Exclusions: output lead / shipping crate | 1 | |
| 2018197 | Combination 200 EC1 (230V, 1-phase) - Includes: 10m (33ft) wired input lead with plug - Exclusions: output lead / shipping crate | 1 | |
| 2018199 | Input Extension Lead CSC200 EC1 - 10m (33ft) - 3C x 6sqmm - Plug and Socket: Mennekes 230V, 32 Amps, 1 phase, 3 pole, 6H, blue | 1 | |
| 2018313 | Combination 200 EC2 (115V, 1-phase) - Includes: 10m (33ft) wired input lead with plug - Exclusions: output lead / shipping crate | 1 | |
| 2018314 | Combination 300 EC2 (200V, 3-phase + E) - Includes: 10m (33ft) wired input lead with plug - Exclusions: output lead / shipping crate | 1 | |
| 2018315 | Combination 300 EC3 (220V, 1-phase) - Includes: 10m (33ft) wired input lead with plug - Exclusions: output lead / shipping crate | 1 | |
| 2018547 | Input Extension Lead CSC200 EC2 - 10m (33ft) - 3C x 6sqmm - Plug and Socket: Mennekes 115V, 32 Amps, 1 phase, 3 pole, 4H, yellow | 1 | |
| 2018548 | Input Extension Lead CSC300 EC1 - 10m (33ft) - 5C x 6sqmm - Plug and Socket: Mennekes 400V, 32 Amps, 3 phase, 5 pole, 6H, red | 1 | |
| 2018549 | Input Extension Lead CSC300 EC2 - 10m (33ft) - 5C x 6sqmm - Plug and Socket: Mennekes 200V, 32 Amps, 3 phase, 4 pole, 9H, blue | 1 | |
| 2018550 | Input Extension Lead CSC300 EC3 - 10m (33ft) - 3C x 10sqmm - Plug and Socket: Mennekes 220V, 63 Amps, 1 phase, 3 pole, 6H, blue | 1 | |
| 2019269 | PV90-4 (400-480VAC input) - 400 Hz 90kVA Solid-State GPU, UL APPROVED - Exclusions: input lead / output lead / shipping crate NOTE: Cannot be ordered by itself. Needs one of the mounting options below. | 1 | |
| 2019270 | PV90-4 (400-480VAC input) - 90kVA, 400 Hz Solid-State GPU - Exclusions: input lead / output lead / shipping crate NOTE: Cannot be ordered by itself. Needs one of the mounting options below. | 1 | |
| 2020323 | TRU-28 (208-480V input). 28VDC tranformer/rectifier Specify one of the following input voltages when ordering: 208, 240, 400, 480 - Exclusions: input lead / output lead / shipping crate | 1 | |
| 2020324 | TRU-28 400Hz 28VDC tranformer/rectifier - Input: 200V 400Hz, typically from a 90KVA converter. Output: 28VDC - Exclusions: input lead ( unit is already fitted with a panel mounted 400Hz receptacle) / output lead / shipping crate | 1 | |
| 2020334 | Input extension lead, 50 metre (164ft) with 63 Amps plug and socket. Note: This is not an input lead, it is an extension for an input lead | 1 | |
| 2020335 | Coolspool 410 28V DC Battery GPU - Includes: BC80 charger. Charger works at both 115 and 230V single phase input. - Exclusions: output lead / shipping crate / input plug for BC80 charger | 1 | |
| 2020341 | Coolspool 130 28V DC Battery GPU - Exclusions: input lead / output lead / shipping crate | 1 | |
| 2020342 | Coolspool 260 28V DC Battery GPU - Exclusions: input lead / output lead / shipping crate | 1 | |
| 2020891 | PS300 (1 phase). Works at: - EC3 (220VAC input, 1 phase + Neutral + E) - Includes: 3 metre (10ft) input cable (without Plug), Padded jacket and carton - Exclusions: output lead / input plug | 1 | |
| 2020922 | Portapump Input Lead - 1m (3.3ft) - 2C x 16sqmm - SB50 + Bare cables | 1 | |
| 2020923 | Portapump Input Lead - 1m (3.3ft) - 2C x 16sqmm - SB50 + SB175 | 1 | |
| 2020924 | Input Lead - 2m (6.5ft) - Socket: IEC C13 - Plug: UK (Type G) | 1 | |
| 2020925 | Input Lead - 2m (6.5ft) - Socket: IEC C13 - Plug: Australia/NZ (Type I) | 1 | |
| 2020939 | Input Lead - 2m (6.5ft) - Socket: IEC C13 - Plug: Euro (Type F - Schuko) | 1 | |
| 2020940 | Input Lead - 2m (6.5ft) - Socket: IEC C13 - Plug: India (Type D) | 1 | |
| 2020941 | Input Lead - 2m (6.5ft) - Socket: IEC C13 - Plug: Israel (Type H) | 1 | |
| 2020942 | Input Lead - 2m (6.5ft) - Socket: IEC C13 - Plug: Italy (Type L) | 1 | |
| 2020943 | Input Lead - 2.5m (8ft) - Socket: IEC C13 - Plug: South Africa (Type M) | 1 | |
| 2020944 | Input Lead - 2m (6.5ft) - Socket: IEC C13 - Plug: UK (Type G) | 1 | |
| 2020945 | Input Lead - 2m (6.5ft) - Socket: IEC C13 - Plug: US (Type B) | 1 | |
| 2020946 | Input Lead - 2m (6.5ft) - Socket: IEC C19 - Plug: Unterminated | 1 | |
| 2020947 | Portapump Input Lead - 3m (10ft) - 2C x 16sqmm - SB50 + Bare cables | 1 | |
| 2020948 | Portapump Input Lead - 3m (10ft) - 2C x 16sqmm - SB50 + SB175 | 1 | |
| 2020949 | Input Extension Lead for EC1 - 20m (66ft) - 5C x 6sqmm - Plug and Socket: Mennekes 400V, 32 Amps, 3 phase, 5 pole, 6H, red | 1 | |
| 2020958 | Output Lead - 5m (16.4ft) - 2C x 70sqmm - Tank/Intravehicular Connector + SB350 | 1 | |
| 2021225 | 12/24V GA Pack. - Includes: - External charger and carton - Excludes: - Input/output leads, input cable for external charger | 1 | |
| 2021537 | Combination 300 EC3 2450PA (220V, 1-phase). This unit replaces the GPU 2400/315 - Includes: 10m (33ft) wired input lead with plug - Exclusions: output lead / shipping crate | 1 | |
| 2022422 | Input Lead - 2m (6.5ft) - Socket: IEC C19 - Plug: EU (Type F - Schuko) | 1 | |
| 21C7478G01 | SET, LEADING EDGE | 2 | |
| 21C7785P01 | LEADING EDGE, SET | 2 | |
| 2207356 | INPUT LEAD - 2M (6.5FT) - SOCKET; IEC C13 - PLUG; US (TYPE B) | 1 | |
| 25-0A | LEAD SEALING PLIERS | 6 | |
| 269T9259 | Micrometer Lead Lag & Flapping Hinge | 1 | |
| 2C14728 | TEMPLATE,BLEND LIMITS-LEADING EDGE,STAGE 1 | 1 | |
| 2C14728G01 | TEMPLATE - LEADING EDGE, FAN BLADE | 5 | |
| 2C6879 | TEMPLATE,LEADING EDGE-FAN BLADE STAGE 1 | 1 | |
| 2C6879P01 | Template - Leading Edge, Contour, Stage One Fan Rotor Blade | 4 | |
| 2C7546G11 | FIXTURE - FAN BLADE LEADING EDGE, 60 HZ | 1 | |
| 2C7546G12 | FIXTURE - FAN BLADE LEADING EDGE, 50 HZ | 1 | |
| 2C7734P01 | CONTOUR MASTER - STAGE ONE FAN ROTOR BLADE LEADING EDGE | 1 | |
| 2C91069 | GAGE,INSPECT LEAD.EDGE-FAN BLD | 1 | |
| 2C91069G01 | GAUGE FAN BLADE LEADING EDGE | 1 | |
| 2KEX-800 | LEADING EDGE PROTECTORS (set of 4) | 1 | |
| 2ME65B94003 | CIRCUIT BREAKER LOCK SET - LEADING EDGE FLAP DRIVE | 1 | |
| 2TE65B00776-51 | REPAIR FUEL QTY LEAD - IND COMP COAX U/S | 1 | |
| 337-045 | EXTENDED CANOPY COVER, down to struts, extends past wing Leading Edge | 1 | |
| 33A103 | LEAD,PHASEC 2200 TO MIN-DRV 2M | 5 | |
| 35-67369-0001 | CN235 INTERCOM EXT.LEAD | 1 | |
| 3722 LMT | UP MOUNTING BOARD & EXTENSION LEAD | 1 | |
| 380-026-02 | BREAKOUT BOX - LEADING EDGE FLAP AND SLAT POSITION INDICATING SYSTEM | 1 | |
| 382000-1001 | LEADING EDGE ACTUATOR ASSY | 3 | |
| 388408-3 | HINGE LOWER AFT LEADING EDGE | 1 | |
| 3MIT65-16209 | LEADING EDGE 6 | 1 | |
| 414-102 | HEAT EXCHANGER INLET PLUGS (on leading edge of wing) (set of 2) | 1 | |
| 414-104 | HEAT EXCHANGER EXHAUST PLUGS (below leading edge of wing) (set of 2) | 1 | |
| 47337-0007 | Stainless Steel Extractor for Camera Socket, 8.5x8.5 Type, Lead-Free | 1 | |
| 47337-0008 | Stainless Steel Extractor for Camera Socket, 8.5x8.5 Type, Lead-Free | 1 | |
| 47586-0008 | Stainless Steel Extractor for Camera Socket, 6.5x6.5 Type, Lead-Free | 1 | |
| 506-36320-4023 | JIG - LEADING EDGE - STABILIZER | 1 | |
| 5180012350916 | LEADING EDGE, SET | 1 | |
| 52SP158 20-2 | METAL LEADING EDGE RIGHT | 1 | |
| 5952162-1 | VERTICAL STAB LEADING EDGE SLING | 4 | |
| 6-03422A | SINGLE SECONDARY LEAD | 1 | |
| 6-15 | HF Stub Mast Lead In | 3 | |
| 640-010-048 | LEAD , PHASEC - MINI ROTOGUN | 3 | |
| 68307-150-1 | CONNECTING LEAD | 1 | |
| 69002-R815505 | WIRE LEAD BLOCK POSITIONING TOOL | 1 | |
| 69002-R815505-0000 | WIRE LEAD BLOCK POSITIONING TOOL | 1 | |
| 6TE65B00114 | TEST EQUIPMENT RIGGING BAR - FLAP INSTALLATION, LEADING EDGE, WING | 13 | |
| 763-872 | KIT, RUDDER LEADING | 1 | |
| 78-8140-0378-2 | LEAD: TEST,BLU/YEL,ALLIGATOR, 3M,1.5M,2MM,NO PIN,ROHS | 1 | |
| 78-8140-0382-4 | LEAD: TEST,GRN BANANA, 3M,1.5M,4MM,STACKING,ROHS | 1 | |
| 83710316 | LEAD FORMING TOOL | 1 | |
| 856A2007P01 | TOOLING (REMOVAL IGNITION LEAD NUT) | 20 | |
| 856A2331 | CHECK - LEAD FOR EGT RH/LH WIRING HARNESSES | 1 | |
| 856A2331P01 | CHECKING LEAD - LH/RH EGT WIRING | 4 | |
| 856A2334P01 | CHECKING LEAD - T49,5 WIRING HARNESS | 3 | |
| 856A2405G01 | Gauge, Leading Edge | 1 | |
| 856A2405G02 | Gauge, Leading Edge of Fan Blade | 1 | |
| 856A2413G01 | TEMPLATE - LEADING EDGE FAN BLADE | 2 | |
| 856A2800G02 | Gauge, Leading Edge | 1 | |
| 856A2802 | TEMPLATE CHECKING FAN BLADE LEADING EDGE | 1 | |
| 856A2802G01 | TEMPLATE FAN CHECKING FAN BLADE LEADING EDGE | 1 | |
| 856A2949 | TEMPLATE, CHECKING - FAN BLADE LEADING EDGE | 1 | |
| 856A2949G01 | EXTRACTOR FAN BLADE LEADING EDGE | 1 | |
| 856A2949G02 | LEADING EDGE TEMPLATE - FAN BLADE | 1 | |
| 856A3317 | LEAD,CHECK-EGT(T495) RH WIRING HARNESS | 1 | |
| 856A3317P01 | CHECK LEAD RH WIRING HARNESS EGT | 1 | |
| 856A3317P02 | Check-lead for wiring harness EGT-RH | 5 | |
| 856A3318 | LEAD,CHECK-EGT(T495) LH WIRING HARNESS | 1 | |
| 856A3318P02 | Check-lead for wiring harness EGT-LH | 5 | |
| 856A3602G02 | GAGE - LEADING EDGE FAN BLADE | 1 | |
| 856A3622 | TEMPLATE FAN BLADE LEADING | 1 | |
| 856A3622G01 | CHECK FAN BLADE LEADING EDGE | 1 | |
| 856A3622G02 | TEMPLATE CHECK OF FAN BLADE LEADING EDGE | 1 | |
| 856A3622G03 | BLENDING TEMPLATE - LEADING EDGE | 7 | |
| 856A3771G01 | Template Fan Blade Leading Edge | 4 | |
| 856A4617G01 | Template - Fan Blade Leading Edge and Trailing Edge | 1 | |
| 856A4625 | LEADING EDGE CONTOUR | 1 | |
| 856A4625G01 | LEADING EDGE CONTOUR FAN BLADE | 1 | |
| 856A4625G02 | LEADING EDGE CONTOUR FAN BLADE | 1 | |
| 856A5787G03 | LEADING EDGE TEMPLATE - FAN BLADE | 1 | |
| 856A5916G01 | LEADING EDGE CONTOUR - FAN BLADE | 1 | |
| 856A5916G02 | LEADING EDGE CONTOUR - FAN BLADE | 1 | |
| 856A5928G01 | WAVINES BLENDING LEADING EDGE | 1 | |
| 856A5928G02 | WAVINES BLENDING LEADING EDGE TEMPLATE - FAN BLADE | 1 | |
| 856A6608G02 | TEMPLATE CHECK OF FAN BLADE LEADING AND TAILING EDGE | 1 | |
| 856A6609G01 | TEMPLATE - FAN BLADE LEADING EDGE | 2 | |
| 856A6746G02 | TEMPLATE FAN BLD LEADING EDGE | 1 | |
| 85VJ9814-005 | LEAD ASSY, TIMING TEST SET | 1 | |
| 865A3317 | LEAD CHECK EGT RH WIRING HARDNESS | 1 | |
| 865A3318 | LEAD CHECK EGT RH WIRING HARDNESS | 1 | |
| 90-LG6001 | Bowers 2 Point Lead Gauge 1/2 - 2" | 1 | |
| 90-LG6001-1 | Bowers 2-point external lead gauge | 1 | |
| 90-LG6002 | Bowers 2PT Lead Gauge, ½"-4" Thread, Int/Ext | 1 | |
| 90-LG6002-1 | Bowers 2PT Lead Gauge, ½"-4" Thread, Int/Ext | 1 | |
| 90-LG6002-M | Bowers 2PT Lead Gauge, ½"-4" Thread, Int/Ext | 1 | |
| 90-LS1001 | Bowers Lead Gauge Setting Std, 3/4" TPF | 1 | |
| 90-LS1002 | Bowers Lead Gauge Setting Std, No Taper | 1 | |
| 90-LS1005 | Bowers Lead Gauge Setting Std, 3/4" TPF, 5TPI | 1 | |
| 90-LS1006 | Bowers Lead Gauge Setting Std, 1" TPF, 5TPI | 1 | |
| 90-LS1007 | Bowers Lead Gauge Setting Std, 2" TPF, 4TPI | 1 | |
| 90-LS1008 | Bowers Lead Gauge Setting Std, 3" TPF, 4TPI | 1 | |
| 90-LS1009 | Bowers Lead Gauge Setting Std, 3" TPF, 5TPI | 1 | |
| 90-LS1010 | Bowers Lead Gauge Setting Std, 1½" TPF, 4TPI | 1 | |
| 90-LS1011 | Bowers Lead Gauge Setting Std, 2" TPF, 3½TPI | 1 | |
| 90-LS1012 | Bowers Lead Gauge Setting Std, 3" TPF, 3½TPI | 1 | |
| 90-LS1013 | Bowers Lead Gauge Setting Std, 1¼" TPF, 3TPI | 1 | |
| 90-LS5001 | Bowers Lead Gauge Setting Std, 1-5 Pitch | 1 | |
| 90-LS5002 | Bowers Lead Gauge Setting Std, 6-18 Pitch | 1 | |
| 9043105-4 | ENGINE IGNITION LEAD | 1 | |
| 95-92418-0001 | VTP LEADING EDGE SLING | 1 | |
| 956A6629P07 | LEADING EDGE TEMPLATE - FAN BLADE | 1 | |
| 98A27601003000 | PIN RIGGING SPEEDBRAKE LEADING EDGE | 1 | |
| 98A27804000000 | Extractor for pinleading edge jack gimbal | 7 | |
| 98A27808006000 | MEASURING DEVICE - SLAT LEADING EDGE | 3 | |
| 98A27808006000 | MEASURING DEVICE - SLAT LEADING EDGE | 3 | |
| 98A27808006001 | MEASURING DEVICE-SLAT LEADING EDGE | 1 | |
| 98A55307577000 | SLING LEADING EDGE LOWER | 1 | |
| 98A55307577001 | SLING - LEADING EDGE LOWER VERTICAL STABILIZER | 2 | |
| 98D27804009001 | LIFTING FRAME/SLINGS WITH STORAGE DOLLY FOR REMOVAL/INSTALLATION LEADING EDGE SLAT | 16 | |
| 98D55307531000 | SLING SLING DORSAL FIN, LEADING EDGES | 1 | |
| 98D55307531001 | SLING SLING-DORSAL FIN LEADING EDGES | 8 | |
| 98D5700 3500 000 | PROTECTION - WING LEADING EDGE | 12 | |
| 98D5700350000 | PROTECTION WING LEADING EDGE | 1 | |
| 98D57003500000 | PROTECTION-WING LEADING EDGE | 12 | |
| 98D57003500100LH | PROTECTION, LEADING EDGE | 1 | |
| 98D57003500101RH | PROTECTION, LEADING EDGE | 1 | |
| 98D57003500102LH | PROTECTION, LEADING EDGE | 1 | |
| 98D57003500103RH | PROTECTION, LEADING EDGE | 1 | |
| 98F27508498000 | LIFTING FRAME/SLINGS WITH STORAGE DOLLY FOR REMOVAL/INSTALLATION LEADING EDGE SLAT | 24 | |
| 98F27806000000 | LIFTING FRAME/SLINGS WITH STORAGE DOLLY FOR REMOVAL/INSTALLATION LEADING EDGE SLAT | 2 | |
| 98F27806001000 | LIFTING FRAME/SLINGS WITH STORAGE DOLLY FOR REMOVAL/INSTALLATION LEADING EDGE SLAT | 3 | |
| 98F27806002000 | LIFTING FRAME/SLINGS WITH STORAGE DOLLY FOR REMOVAL/INSTALLATION LEADING EDGE SLAT | 1 | |
| 98L27003000132 | CHARNIERE GUIDE-CABLE HINGE FAIRLEAD | 1 | |
| 98L27508485000 | GAGE-FLAP LEADING EDGE | 3 | |
| A21008-1 | LOCK ASSY LEADING EDGE FLAP DRIVE | 14 | |
| A22002-72 | LEADING EDGE FLAP HEALTH TESTER | 5 | |
| A27004-1 | HOIST ADAPTER - LEADING EDGE SLAT DRIVE | 3 | |
| A27004-2 | HOIST ADAPTER - LEADING EDGE SLAT DRIVE | 4 | |
| A27007 | GROUND LOCK LEADING EDGE SLATS | 1 | |
| A27007-1 | GROUND LOCK LEADING EDGE FLAP | 9 | |
| A27007-12 | Ground Lock -Leading Edge Slats | 5 | |
| A27007-19 | GROUND LOCK - LEADING EDGE SLATS | 13 | |
| A27009-7 | TOOLING LEADING EDGE | 20 | |
| A27017 | SLING EQPT - LEADING | 1 | |
| A27017-1 | SLING EQUIP- LEADING EDGE SLAT | 1 | |
| A27017-41 | SLING EQUIPMENT - LEADING EDGE SLAT | 11 | |
| A27027-34 | SLING OUTBD LEADING EDGE FLAP | 1 | |
| A27049-1 | CHECK FIXTURE - LEADING EDGE SLAT ANGLE GEARBOX BACKLASH | 1 | |
| A27056 | SLING EQPT – LEADING EDGE SLAT, REMOVAL AND INSTALLATION | 1 | |
| A27060-11 | JIG EQUIPMENT - INBOARD AND OUTBOARD LEADING EDGE SLAT DRIVE AND TRAILING EDGE FLAP DRIVE POWER CONTROL UNIT | 1 | |
| A27070-48 | BEARING INSTALLATION EQUIPMENT - ROTARY BEARING INSTALLATION EQUIPMENT - ROTARY LEADING EDGE SLAT DRIVE | 1 | |
| A27070-61 | BEARING INSTALLATION EQUIPMENT - ROTARY BEARING INSTALLATION EQUIPMENT - ROTARY LEADING EDGE SLAT DRIVE | 1 | |
| A27070-65 | BEARING INSTALLATION EQUIPMENT - ROTARY BEARING INSTALLATION EQUIPMENT - ROTARY LEADING EDGE SLAT DRIVE | 1 | |
| A27070-80 | BEARING INSTALLATION EQUIPMENT - ROTARY BEARING INSTALLATION EQUIPMENT - ROTARY LEADING EDGE SLAT DRIVE | 1 | |
| A27073-1 | SOCKET - THIN WALL, GEARBOX, INBOARD LEADING EDGE SLAT DRIVE | 5 | |
| A27077-1 | ADAPTER - LEADING EDGE SLAT DRIVE | 7 | |
| A27078-7 | SPLINE ADAPTERS - LEADING EDGE SLAT DRIVE ROTARY ACTUATORS AND GEARBOXES | 1 | |
| A27089-1 | GAUGE RIGGING LEADING EDGE SLAT OUTBOARD | 1 | |
| A27089-9 | GAGE - RIGGING, LEADING EDGE SLAT OUTBOARD WING | 9 | |
| A27094-1 | SPACER SET - PRELOAD, LEADING EDGE SLAT RIGGING | 1 | |
| A27094-5 | SPACER SET - PRELOAD, LEADING EDGE SLAT RIGGING | 7 | |
| A27101-5 | WRENCH - ADJUSTMENT, INBOARD LEADING EDGE SLATS | 8 | |
| A27101-6 | WRENCH ADJUSTABLE LEADING EDGE SLAT | 1 | |
| A27102-7 | ADAPTER - LEADING EDGE SLAT AND TRAILING EDGE FLAP, MANUAL DRIVE | 14 | |
| A27112-1 | RIGGING EQUIPMENT - LEADING EDGE SLAT POSITION SENSOR SWITCH | 6 | |
| A27130-1 | LOCKOUT EQUIPMENT - LEADING EDGE SLAT DRIVE | 2 | |
| A57003-1 | LOCATING EQUIPMENT - WEDGE REPLACEMENT, INBOARD AND OUTBOARD LEADING EDGE SLAT | 3 | |
| A57007-8 | LUBRICATING EQUIPMENT - LEADING EDGE SLAT AUXILIARY ARM ROLLER BOLT | 10 | |
| AA5-310 | HORIZONTAL STABILIZER COVERS, early models w/leading edge strake, WINTER USE (set of 2) | 1 | |
| AA5-315 | HORIZONTAL STABILIZER COVERS, early models w/leading edge strake, ALL YEAR USE (set of 2) | 1 | |
| AA500F-41 | 10M MAINS LEAD-UK PLUG | 3 | |
| AA500F-43 | 10M MAINS LEAD | 1 | |
| AA500F-44 | 10M MAINS LEAD (USA) | 2 | |
| ABS1509D125NN | BONDING LEAD | 1 | |
| ABS1509D160NN | BONDING LEAD | 1 | |
| ABS1509D200NN | BONDING LEAD | 1 | |
| ABS1509D220NN | BONDING LEAD | 1 | |
| ADTS405_OPTA2 | HAND TERMINAL EXTENSION LEAD 50M | 1 | |
| AF-5132 | CUSTOM FLEXIBLE SURFACE PROBE 5.O" LONG, 1.6" DROP, 1.3" LONG TOTHE RIGHT SIDE OF THE 1.6" DROP AND .200" FINAL DROP FROM THE 1.3" LEAD LENGTH. 1-3MHz, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3264 | Custom Reference Standard for the Boeing Lead Screw inspection, equivalent to 7903385. Material: 4150 Alloy Steel, 1.5 Outside Diameter and 1.069" Inside Diameter with 3 EDM Flaws per BSS 7048 page 2 Table 1. Includes Test Report and Certificate of Confor | 1 | |
| AGE-01842-401 | TOOL - RIGGING, LEADING EDGE SLATS | 5 | |
| AGE-03379-401 | COVER - VERT STAB LEADING EDGE NACA | 6 | |
| AGE-036 28-401 | TOOL RIGGING LEADING EDGE SLAT | 4 | |
| AGE-03628-401 | TOOL - RIGGING, LEADING EDGE SLATS | 4 | |
| AGE01842-401 | TOOL-RIGGING LEADING EDGE | 5 | |
| AJ65B80380 | ASSEMBLY JIG - TRANSMISSION ASSEMBLY, INBOARD LEADING EDGE FLAP DRIVE | 1 | |
| AL-16 | SQUARE TOOL BITS ,STYLE AL CI° LEAD ANGLE ,TURNING TOOL PREMIUM CARBIDE TIPPED FOR TURNING TO A SQUARE SHOULDER. TOOL NO. AL-16 (LEFT HAND) ,W X H(SHANK SIZE) X L (1X1X7), NOSE RAD. 1/32 ,GRADE 370E =C5 EDP NO. 70245, LIST NO, 4110 .MORSE CUTTING TOOL | 1 | |
| AT2562 | LEADING EDGE OVERHEAT | 1 | |
| AT2652 | Leading Edge Overheat − Kit | 1 | |
| ATR-115 | INSULATED ENGINE COVERS, back to leading edge of wing (specify model) (set of 2) | 1 | |
| AZL01756-R00 | T5 - TEST LEAD RED - WETTING CURRENT | 1 | |
| B18-115 | OIL COOLER CENTER SECTION INLET PLUGS (in wing leading edge) (set of 2) | 1 | |
| B18-118 | COCKPIT AIR INLET PLUGS (in leading edge, adjacent to oil cooler) (set of 2) | 1 | |
| B20003-53 | PIN RIG LEADING EDGE SLAT | 4 | |
| B20003-75 | #6 LEADING EDGS SLAT RIGGING PIN KIT | 1 | |
| B27001 | RIGGING EQUIPMENT -0 LEADING EDGE SLAT, | 1 | |
| B27001-1 | RIGGING EQUIPMENT - LEADING EDGE SLAT, INBOARD/OUTBOARD | 8 | |
| B27001-27 | RIGGING SET LEADING EDGE | 6 | |
| B27001-33 | RIGGING EQUIPMENT - LEADING EDGE SLAT, INBOARD/OUTBOARD | 4 | |
| B27001-40 | RIGGING EQUIPMENT - LEADING EDGE SLAT, INBOARD/OUTBOARD | 4 | |
| B27001-51 | RIGGING EQUIPMENT - LEADING EDGE SLAT, INBOARD/OUTBOARD | 9 | |
| B27006-1 | HOIST EQUIPMENT PDU LEADING EDGE SLATS | 3 | |
| B27006-65 | HOIST EQUIPMENT - POWER DRIVE UNIT (PDU), LEADING EDGE SLATS, REMOVAL/INSTALLATION | 2 | |
| B27019-10 | SLING EQUIPMENT - LEADING EDGE SLAT | 12 | |
| B27020-29 | LOCK SET - LEADING EDGE SLAT DRIVE | 6 | |
| B27020-31 | LOCK SET - LEADING EDGE SLAT DRIVE | 15 | |
| B27020-32 | LOCK SET LEADING EDGE SLAT DRIVE | 6 | |
| B27036-1 | TEST EQUIPMENT - ANGLE GEARBOX, LEADING EDGE SLAT DRIVE | 1 | |
| B27041-1 | RIGGING TOOL LEADING EDGE SLAT TRAVEL | 2 | |
| B27077-1 | LOCK - LEADING EDGE SLAT DRIVE | 7 | |
| B27077-2 | LOCK - LEADING EDGE SLAT DRIVE | 2 | |
| B27077-9 | LOCK - LEADING EDGE SLAT DRIVE | 10 | |
| B300-125 | ENGINE COVERS, back to wing leading edge (set of 2) | 1 | |
| B350-125 | ENGINE COVERS, back to wing leading edge (set of 2) | 1 | |
| B36-056 | EXTENDED CANOPY COVER (DOWN TO WING ROOT & BACK TO LEADING EDGE OF HORIZ STAB) | 1 | |
| B36-058 | EXTENDED CANOPY/ENGINE COVER (36 models, DOWN TO WING ROOT & BACK TO LEADING EDGE OF HORIZ STAB), BELLY STRAP TYPE | 1 | |
| B50-111 | ENGINE COVERS (back to leading edge of wing) (set of 2) | 1 | |
| B50-112 | INSULATED ENGINE COVERS (back to leading edge of wing) (set of 2) | 1 | |
| B767-115 | DEAR SALES PLEASE QUOTE THE FOLLOWING: B767-115 (INTAKE COVER) 2 PCS (OR STOCK) RFQ: 197031 PLEASE INCLUDE MFG NAME, MFG COFC REQUIRED, SIZE/WEIGHT/DIMENSIONS AND LEAD TIME IF NO/PARTIAL STOCK AVAILABLE. | 1 | |
| B78002-31 | Nose - Lead In | 1 | |
| B78002-32 | Nose - Lead In | 1 | |
| B78002-33 | Nose - Lead In | 1 | |
| B78008 | TORQUE LEAD SCREW NUT INTO PISTON | 1 | |
| B78016-8 | RETAINING TOOL LEAD | 3 | |
| B78017-1 | Installation Equipment - Bearing - Lead Screw, Thrust Reverser Non-Locking Actuator Assembly | 9 | |
| B95-155 | INSULATED ENGINE COVERS (back to leading edge of wing) (set of 2) | 1 | |
| BC899A8456-000 | FUEL SYSTEM INTERFACE LEAD HS146 (CABLE). | 1 | |
| BC899A8464-000 | BONDING LEAD (15 M.) CABLE | 1 | |
| BREAKOUT-LEAD | A300 DOOR WARNING SW LEAD TOOL | 1 | |
| BT51 | BONDING TESTER & LEADS | 8 | |
| C15292 | BONDING METER C/W LEAD MODEL T477W | 9 | |
| C15480 | BONDING METER LEAD | 4 | |
| C27001 | RIGGING EQUIPMENT-LEADING EDGE SLAT,INBOARD/OUTBOARD | 1 | |
| C27012-1 | Set, Lockout-Leading Edge | 12 | |
| C27012-14 | Lockout Set -Leading Edge Slat Actuator | 10 | |
| C27012-15 | LEADING EDGE SLAT ACTUATOR LOCKOUT SET | 3 | |
| C27012-3 | LEADING EDGE FLAP GAG | 4 | |
| C27012-4 | LEADING EDGE FLAP GAG | 6 | |
| C27019-1 | Tab Bending Equipment -Locking Washer. Leading Edge Slat Actuator | 3 | |
| C27020-1 | Torque Wrench Adapter -Leading Edge Slat | 3 | |
| C27021-1 | Test Block-Leading Edge Actuator | 2 | |
| C27023-1 | HOLDING FIXTURE - LEADING EDGE SLAT ACTUATOR | 1 | |
| C27027-14 | Test Fixture -Leading Edge Slat Actuator | 2 | |
| C27038-1 | LOCKOUT PIN - LEADING EDGE CRUISE DEPRESSURIZATION VALVE | 7 | |
| C27038-6 | Lockout Pin - Leading Edge Cruise Depressurization Valve | 22 | |
| C27051 | LOCKOUT SET - LEADING EDGE SLATS AND KRUEGER FLAPS ACTUATORS | 3 | |
| C27051-1 | Lock Set - Leading Edge Slat and Krueger Flap Actuators | 17 | |
| C27051-1(-2) | LOCK SET- LEADING EDGE SLAT AND KRUE | 1 | |
| C27051-2 | LEADING EDGE FLAP ACTUATOR LOCK SET | 9 | |
| C27051-2 | LOCK OUT SET LEADING EDGE KRUGER FLAP and SLAT ACTUATOR | 9 | |
| C27051-29 | Lock Set - Leading Edge Slat and Krueger Flap Actuators | 26 | |
| C27051-3 | LEADING EDGE SLAT ACTUATOR LOCK SET | 3 | |
| C27056 | SLING EQPT-LEADING EDGE SLAT. REMOVAL AND INSTALLATION | 1 | |
| C27056- 35 | SLING -- LEADING EDGE SLAT REM | 9 | |
| C27056-16 | LIFTING FRAME/SLINGS WITH STORAGE DOLLY FOR REMOVAL/INSTALLATION LEADING EDGE SLAT | 1 | |
| C27056-19 | Sling Equipment - Leading Edge Slat, Removal and Installation | 10 | |
| C27056-35 | Sling Equipment - Leading Edge Slat, Removal and Installation (CE) | 9 | |
| C27056‐35 | SLING -‐ LEADING EDGE SLAT REM | 9 | |
| C27059-1 | Test Block Equipment -Leading Edge Flap And Slat Actuator | 3 | |
| C27076-1 | ADAPTER - TORSION ROD INSTALLATION, LEADING EDGE SLAT | 2 | |
| C27076-9 | Adapter -Torsion Rod Installation. Leading Edge Slat | 4 | |
| C500-045 | FUSELAGE/NOSE COVER (back to leading edge of support pylons) | 1 | |
| C55016-1 | SLING ASSEMBLY - LEADING EDGE, VERTICAL STABILIZER | 2 | |
| C90A-110 | HEAT EXCHANGER INLET PLUGS (in leading edge) (set of 2) | 1 | |
| CB-008402 | CB-008402;8-PIN MOD TO 2 CLIP LEADS _BED-O-NAILS_ | 1 | |
| CF65B82986 | CHECK FIXTURE - BACKLASH CF65B82986 GEARBOX ASSEMBLY, INBOARD LEADING EDGE FLAP DRIVE | 1 | |
| CJ6-103 | LEADING EDGE PLUG | 1 | |
| CO255 | 2 WIRE LEAD, 3 PINS MALE PLUG, KELVIN CROCODILE CLIP FOR RCP2A | 1 | |
| CT-857B | LEAD FREE COMBINATION SOLDERING STATION | 1 | |
| D55-056 | EXTENDED CANOPY COVER (DOWN TO WING ROOT & BACK TO LEADING EDGE OF HORIZ STAB) | 1 | |
| D5795039100000 | BONDING LEAD | 1 | |
| D60-1127-10-55 | LEADING EDGE PROTECTION | 1 | |
| D60-1127-10-56 | LEADING EDGE PROTECTION RH | 1 | |
| D622P0010101 | LEAD LAG DAMPER INSTALLATION | 1 | |
| DO7010-255 | 2 WIRE LEAD, 3 PINS MALE PLUG, KELVIN CROCODILE CLIP | 1 | |
| DS-1080 | LEAD INHALER | 1 | |
| E-C622G401101 | RIGGING TOOLS LEAD LAG DAMPER | 1 | |
| E0088-10-200 | LEAD BONDING | 1 | |
| E0092-10-160NN | LEAD BONDING | 1 | |
| E0092-10-220NN | LEAD BONDING | 1 | |
| E0092-40-125 | BONDING LEAD | 1 | |
| E0092-40-180NN | BONDING LEAD | 1 | |
| EECS309B-3 | 32IN POSITIVE LEAD AND CLAMP | 1 | |
| EECS309B-4 | 32IN NEGATIVE LEAD AND CLAMP | 1 | |
| EECS309B-5 | 60IN POSITIVE LEAD AND CLAMP | 1 | |
| EECS309B-6 | 60IN NEGATIVE LEAD AND CLAMP | 1 | |
| EECS309B-9 | SET OF MOTORCYCLE LEADS 60IN | 1 | |
| EEDMRPM500 | TACH-SMALL ENGINES W GAS LEAD | 1 | |
| ELCSM25A-MPOF-MPOF | ELCSM25A-MPOF-MPOF;25M SM MPO LAUNCH CABLE POLARITY A - UNPINNED WITH SHORT LEAD TO UNPINNED | 1 | |
| ELCSM25A-MPOF-MPOM | ELCSM25A-MPOF-MPOM;25M SM MPO LAUNCH CABLE POLARITY A - UNPINNED WITH SHORT LEAD TO PINNED | 1 | |
| EPR TEST LEADS&TUBE | EPR TEST SET LEADS & TUBING TOOL | 1 | |
| ET9416 | AVIONICS TESTING LEADS | 1 | |
| ETher Weld Kit | ETher Weld Kit – includes, Probe, Weld, Dia 16.00mm (Medium) 100kHz, Probe, Unshielded, Broad Band, Test Block, Weld Probe, Lead, Lemo 12-Way - Lemo 4-Way, Lead. Lemo 00 to BNC, 1.5m, Butterfly PTFE Tape, Deluxe Probe Case PHDC1, Hard Transit Case | 1 | |
| F70144 | LOCK ASSY -0 WING LEADING EDGE FLAP TO LOCK THE | 1 | |
| F72759 | LOCK, LEADING EDGE FLAP | 5 | |
| F72759-1 | LOCK, LEADING EDGE FLAP | 1 | |
| F7X-800 | WING LEADING EDGE PROTECTORS (set of 4) | 1 | |
| F7XC551900120A1 | LEADING EDGE EXTENSION TOOL | 1 | |
| F800049-56 | ASSEMBLY - LOCK, FLIGHT CONTROLS(LEADING EDGE) | 1 | |
| F80048 | LOCK ASSEMBLY LEADING EDGE FLAP AND SLAT ACTUATORS | 1 | |
| F80048-1 | LOCK - LEADING EDGE FLAP ACTUATOR | 1 | |
| F80048-2 | LOCK - LEADING EDGE FLAP ACTUATOR | 1 | |
| F80048-3 | LOCK - LEADING EDGE FLAP ACTUATOR | 1 | |
| F80048-36 | LOCK - LEADING EDGE FLAP AND SLAT ACTUATO | 1 | |
| F80048-37 | LOCK - LEADING EDGE FLAP AND SLAT ACTUATO | 1 | |
| F80048-38 | LOCK - LEADING EDGE FLAP AND SLAT ACTUATO | 1 | |
| F80048-39 | LOCK - LEADING EDGE FLAP AND SLAT ACTUATO | 1 | |
| F80048-40 | LOCK - LEADING EDGE FLAP AND SLAT ACTUATO | 1 | |
| F80048-41 | LOCK - LEADING EDGE FLAP AND SLAT ACTUATO | 1 | |
| F80048-42 | LOCK - LEADING EDGE FLAP AND SLAT ACTUATO | 1 | |
| F80048-43 | Lock assembly - Leading Edge Flap And Slat Actuators | 1 | |
| F80048-57 | LEADING EDGE SLAT LK | 7 | |
| F80048-58 | Leading Edge Flap | 10 | |
| F80048-59 | LOCK ASSEMBLY - LEADING EDGE FLAP AND SLAT ACTUATORS | 8 | |
| F80048-60 | LOCK - LEADING EDGE FLAP AND SLAT ACTUATO | 8 | |
| F80048-61 | LOCK - LEADING EDGE FLAP AND SLAT ACTUATO | 1 | |
| F80048-62 | LOCK - LEADING EDGE FLAP AND SLAT ACTUATO | 3 | |
| F80048-78 | LOCK ASSY. LEADING SLATS | 3 | |
| F80048-79 | LEADING EDGE FLAP LOCK ASSY | 4 | |
| F80048-84 | LEADING EDGE FLAP GAG | 16 | |
| F80048-87 | LOCK ASSEMBLY - LEADING EDGE FLAP AND SLAT ACTUATORS | 1 | |
| F80048-88 | LOCK ASSEMBLY - LEADING EDGE FLAP AND SLAT ACTUATORS | 2 | |
| F80048-89 | LEADING EDGE FLAP ACTUATOR LOCK | 14 | |
| F80048-9 | LOCK SET, LEADING EDGE FLAP ACTUATOR | 1 | |
| F80048-90 | LEADING EDGE FLAP ACTUATOR LOCK | 13 | |
| F80048-95 | LOCK ASSEMBLY - LEADING EDGE FLAP AND SLAT ACTUATORS | 3 | |
| F80048-XX | Lock Assembly -Leading Edge Flap And Slat Actuators | 1 | |
| F80049-65 | LOCKOUT SET(LEADING EDGE SLATS FLAPS ACUATORS | 16 | |
| F80192-1 | Adapter -Torsion Test. Leading Edge Slats Detent Arm | 3 | |
| F80261-1 | GAGE - LEADING EDGE FLAP ACTUATOR | 2 | |
| F80262-1 | Vice Jaw Equipment -Leading Edge Actuator. Assembly/Disassembly | 2 | |
| F80263-1 | Holding Fixture -Piston. Leading Edge Slat Actuator | 4 | |
| F80265-1 | TEST MANIFOLD LEADING EDGE FLAP ACTUATOR | 3 | |
| F80266-40 | Test Equipment -Leading Edge Flap Actuator | 1 | |
| F80267-1 | Test Fixture -Leading Edge Slat Actuator | 2 | |
| G27009-19 | TEST BOX - ALTERNATE DRIVE MOTOR, LEADING EDGE FLAPS | 4 | |
| G27022-14 | TEST EQUIPMENT - BACKLASH, LEADING EDGE FLAP ROTARY ACTUATOR | 1 | |
| G27105-1 | STUD CLAMP - LEADING EDGE FAILURE INDICATION (LEFI) SYSTEM | 1 | |
| GL2-006 | EXTENDED CANOPY/ENGINE COVER, extends to horiz. stab. leading edge | 1 | |
| GS14705-1 | LEAD SEAL ROLLING TOOL | 2 | |
| GS14856-1 | ROLLING TOOL, LEAD SEAL | 1 | |
| GS15560-1 | LEAD SEAL ROLLING TOOL | 1 | |
| GS15613-1 | ROLLING TOOL, LEAD SEAL | 1 | |
| GS20047-1 | Lead Seal Rolling Tool | 1 | |
| GS20049-1 | Lead Seal Rolling Tool | 1 | |
| GS20834-1 | WIRE LEAD BLOCK POSITIONING TOOL | 4 | |
| GS22828-1 | ROLLING TOOL, LEAD SEAL | 1 | |
| GS23421 | DOME LEAD IN TOOL | 1 | |
| GS23421-1 | DOME LEAD IN TOOL | 1 | |
| GS23665 | INSTAL LEAD WOOL IN THE BLADE TAPER BORE | 1 | |
| GS23665-1 | LEAD WOOL INSTALLATION RODS | 2 | |
| GS23960-1 | Wire lead block positioning tool | 1 | |
| GSE159 | SLING ADAPTER, LEADING EDGE, VERTICAL STABILIZER | 1 | |
| GSE239 | TOOL - RIGGING, LEADING EDGE SLATS | 1 | |
| GSE477 | TOOL RIGGING LEADING EDGE SLAT | 1 | |
| H10-13-4 | HEADSET, TWIN PLUGS, STRAIGHT LEAD | 5 | |
| H10-13.4 | HEADSET, TWIN PLUGS, STRAIGHT LEAD | 5 | |
| HB11SA-621012 | ACME LEAD SCREW 5/8-10 X 24" STAINLESS per 2FT LG | 1 | |
| HC060120E51S | HEAT BLANKETS 6 X 12 IN, 120V 360W WITH 5' LEADS WITH HCXS1201 PLUG INSTALLED | 1 | |
| HC090360E52E1T | HEAT BLANKET, 9" X 36", 5' LEADS, 5WSI, 220V, MOSITE STRETCH, HCS1207 TWIST LOCK 15AMP PLUG INSTALLED. | 1 | |
| HC120240E51S | HEAT BLANKET 12" X 24" 120 V 1440 W, 5' LEADS W/HCS1201 PLUG INSTALLED | 1 | |
| HC120400E52E1T | HEAT BLANKET, MOSITES, 12? X 40?, 220V, 5WSI, 2400W, 5' LEADS W/ HCS1207 TWIST LOCK PLUG (NEMA L6-15P) INSTALLED | 1 | |
| HC130H0050-000 | Tool - bolt removal, manhole &wing leading edge | 3 | |
| HC160480E51Z2T1 | HEAT BLANKETS 16 X 48 IN. WITH 5' LEADS, 5WSI, 120V, 1920W PER ZONE, 3840W TOTAL, DUAL ZONE, HCS1205 TWIST LOCK PLUG INSTALLED PER ZONE | 1 | |
| HS-9373 | TEMPLATE SET - LEADING EDGE | 1 | |
| HS5-23100 | COLUMN RINGS LEADING TOOL | 1 | |
| HS8130 | LEAD LAG SERVO INDICATOR ASSEMBLY | 1 | |
| HS9373 | LEADING EDGE TEMPLATE | 1 | |
| HS9378 | TEMPLATE SET - LEADING EDGE | 1 | |
| IAE2R19427 | FAN BLADE LEADING EDGE INSP KIT | 5 | |
| IFR-4000 | IFR4000 NAVIGATOR COMMUNICATIONS RAMP TEST SET W/EUROPEAN MAINS LEADS | 33 | |
| IFR-6000 | IFR6000-220 MODE A/C/S TRANSPONDER 6000OPT TCAS1/II OPTIONS DME RAMP TESTER W/EUROPEAN MAINS LEAD | 28 | |
| J26004-54 | TEST LEAD- SQUIB,FIRE EXTINGUISHING SYS | 8 | |
| J27003-1 | Adaptor -Leading Edge Slat Drive | 10 | |
| J27015-1 | SPLINE ADAPTER - LEADING EDGE/TRAILING EDGE POWER DRIVE UNIT, MANUAL DRIVE | 7 | |
| J27030-1 | RIGGING EQUIPMENT - LEADING EDGE SLAT INSTALLATION | 2 | |
| J27030-29 | RIGGING EQUIPMENT - LEADING EDGE SLAT INSTALLATION | 9 | |
| J27037-1 | ELECTRICAL COVERS - LEADING EDGE SLATS, TRAILING EDGE FLAPS, FLAPERONS | 12 | |
| J27046-1 | CLAMP EQUIPMENT - LEADING EDGE SLAT DRIVE SHAFT | 14 | |
| J27046-34 | EQUIPMENT - CLAMP, LEADING EDGE SLAT DRIVE SHAFT | 3 | |
| J27049-1 | WRENCH - COUPLING SLEEVE, LEADING EDGE ACTUATION | 5 | |
| J27053-1 | TEST EQUIPMENT - LEADING EDGE ROTARY ACTUATORS | 1 | |
| J27053-30 | TEST EQUIPMENT - LEADING EDGE ROTARY ACTUATORS | 1 | |
| J27059-38 | CHECK FIXTURE EQUIPMENT - BACKLASH, LEADING AND TRAILING EDGE SLAT ANGLE GEARBOXES | 1 | |
| J27069-1 | BACKLASH CHECK EQUIPMENT - OFFSET GEARBOX, LEADING EDGE SLAT ACTUATION | 1 | |
| J27104-1 | Sling equipment-inbd&outbd leading edge slats,removal and installation | 2 | |
| J27105-1 | Slat rigging equipment-leading edge,inboard/outboard | 1 | |
| J27139-1 | CRADLE KIT – GEARED ROTARY ACTUATOR, LEADING EDGE SLAT, INBOARD | 1 | |
| J27160-1 | UNLOCK TOOL - LEADING EDGE SLAT, GEARED ROTARY ACTUATOR (GRA) | 1 | |
| J29007-1 | HOIST ADAPTER - ENGINE DRIVEN PUMP LEADING EDGE SLATS | 5 | |
| J29007-2 | HOIST ADAPTER - ENGINE DRIVEN PUMP LEADING EDGE SLATS | 4 | |
| J29007-3 | HOIST ADAPTER - ENGINE DRIVEN PUMP LEADING EDGE SLATS | 4 | |
| J32084-14 | Bolt Assembly Lead In | 1 | |
| J32084-18 | Upper Lead In | 2 | |
| J32084-19 | Lower Lead In | 2 | |
| J32084-22 | 1st Stage Upper Lead In | 1 | |
| J32084-23 | 1st Stage Lower Lead In | 1 | |
| J32084-24 | 2nd Stage Upper Lead In | 1 | |
| J32084-25 | 2nd Stage Lower Lead In | 1 | |
| J57002-1 | LOCATING EQUIPMENT - WEDGE REPLACEMENT, INBOARD / OUTBOARD LEADING EDGE SLAT | 3 | |
| J57002-34 | LOCATING EQUIPMENT - WEDGE REPLACEMENT, INBOARD / OUTBOARD LEADING EDGE SLAT | 4 | |
| J57002-49 | LOCATING EQUIPMENT - WEDGE REPLACEMENT, INBOARD/OUTBOARD LEADING EDGE SLAT | 2 | |
| J57002-50 | LOCATING EQUIPMENT - WEDGE REPLACEMENT, INBOARD/OUTBOARD LEADING EDGE SLAT | 1 | |
| K27001 | ADAPTER - LEADING EDGE / TRAILING EDGE PWR DRIVE U | 1 | |
| K27001-1 | Removal/Installation Equipment-Leading Edge/Trailing Edge Power Drive Unit (Pdu) (Ce) | 1 | |
| K27001-100 | REMOVAL / INSTL EQUIPMENT - LEADING EDGE / TRAILING EDGE POWER DRIVE UNITS | 4 | |
| K27001-126 | REMOVAL/INSTALLATION EQUIPMENT- LEADING EDGE/TRAILING EDGE POWER DRIVE UNIT (PDU) (CE) | 5 | |
| K27012 | Drive Adapter -Torque Tube Coupling. Leading Edge Slat And Trailing Edge Flap | 1 | |
| K27013-1 | ELECTRICAL COVERS - LEADING EDGE SLATS, TRAILING EDGE FLAPS, FLAPERONS | 11 | |
| K27028 | Spline Adapter -Leading Edge/Trailing Edge Power Drive Unit. Manual Drive | 1 | |
| K27028-1 | SPLINE ADAPTER - LEADING EDGE TRAILING EDGE PWR DR | 1 | |
| K27037 | RIGGING EQUIPMENT - LEADING EDGE SLAT INT'L | 1 | |
| K27037-1 | RIGGING EQUIPMENT - LEADING EDGE SLAT INSTALLATION | 3 | |
| K27037-47 | RIGGING EQUIPMENT - LEADING EDGE SLAT INSTALLATION | 1 | |
| K27037-48 | RIGGING EQUIPMENT - LEADING EDGE SLAT INSTALLATION | 2 | |
| K27037-72 | RIGGING EQUIPMENT - LEADING EDGE SLAT INSTALLATION | 1 | |
| K27037-76 | RIGGING EQUIPMENT - LEADING EDGE SLAT INSTALLATION | 3 | |
| K27037-77 | RIGGING EQUIPMENT - LEADING EDGE SLAT INSTALLATION | 5 | |
| K27037-78 | RIGGING EQUIPMENT - LEADING EDGE SLAT INSTALLATION | 9 | |
| K27037-84 | RIGGING EQUIPMENT - LEADING EDGE SLAT INSTALLATION | 3 | |
| K27040-1 | CLAMP EQUIPMENT - DRIVE SHAFTS, LEADING EDGE SLATS AND TRAILING EDGE FLAPS | 9 | |
| K27042 | CLAMP EQUIPMENT - LEADING EDGE SLAT DRIVE SHAFT | 1 | |
| K27057-1 | WRENCH - ECCENTRIC BUSHING ADJUSTMENT, LEADING EDGE SLAT | 1 | |
| K27057-10 | WRENCH - ECCENTRIC BUSHING ADJUSTMENT, LEADING EDGE SLAT | 7 | |
| K27071-1 | TEST EQUIPMENT - HALF SYSTEM TORQUE BRAKE (HSTB), PDU, LEADING EDGE | 3 | |
| K55010 | Caul Plate - Leading Edge, Horiz & Vert Stabilizer | 1 | |
| L-37799 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-37810 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-37815 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-37822 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-37823 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-37840 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-37845 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-37855 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-37920 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-534718 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-534862 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-534866 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-534884 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-543814 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-544317 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-544394 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-544415 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-544638 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| LATAM10405 | GROUNDLOCK-LEADING EDGE SLATS) | 1 | |
| LCG-400 | LEADER PATTERN GENERATOR (NTSC) (ROCKWELL COLLINS) | 1 | |
| LEAD | BELLING OUT LEAD TOOL | 1 | |
| LEADING EDGE OVERHEAT | LEADING EDGE OVERHEAT | 1 | |
| LEADWRWINBX21 | LEADERSHIP WRNCH WINDOW BOX 21 | 1 | |
| LR2065-PROBE | TEST LEADS WITH HEAVY DUTY BOND TESTING PROBE | 1 | |
| LS03-710 | LEAD SET WITH 3 METRE LEADS AND TERMINATED WITH LARGE KELVIN CLIPS TYPE KC3 | 1 | |
| ME65B06709-1 | MECHANICAL EQUIPMENT - WORK PLATFORM, LEADING EDGE FAIRINGS | 3 | |
| MER-105 | AIR CYCLE MACHINE INTAKE PLUGS (in wing leading edge) (set of 2) | 1 | |
| MIT114N4057 | MISC TOOL LEADING EDGE SLAT TRAILING EDGE WEDGE | 1 | |
| MIT65B04017 | LUBE ADAPTER SET - FLAP LEADING EDGE TORQUE TUBE COUPLING | 4 | |
| MPS49-OPTIONB7 | GRAY CODE INTERFACE PORT + 2M LEAD | 1 | |
| MQ8B-500 | GIMBAL FLIR DOME COVER, Hi-Vis Red, Padded around "ears" w/ White Reflective imprints, RBF Streamer on Starboard side or Leading Edge, synchable along top edge, NSN: 1730-01-665-6281 | 1 | |
| MS25083-4DD6 | BONDING LEAD | 2 | |
| MS3-23100 | BOTTOM PLUG LEADING TOOL | 1 | |
| MTTL301-1 | 12IN BLACK LEAD STRAIGHT | 1 | |
| MTTL301-2 | 18IN BLACK LEAD STRAIGHT | 1 | |
| MTTL301-3 | 24IN BLACK LEAD STRAIGHT | 1 | |
| MTTL311-1 | 12IN BLACK COILED LEAD | 1 | |
| MTTL311-2 | 18IN BLACK COILED LEAD | 1 | |
| MTTL311-3 | 24IN BLACK COILED LEAD | 1 | |
| MTTL360 | 60IN MED-DUTY JUMPER-LEAD PAIR | 1 | |
| MTTL700 | KIT, TEST LEAD, INTE | 1 | |
| MTTL725 | TEST LEAD SET HARD POINT | 1 | |
| MWUX1214A | WEDGE, LEADING GEAR INSPECTION (NDT) | 1 | |
| N/A | 240V 3 PIN PLUG LEAD | 5 | |
| NDT629 | TRAILING EDGE WEDGE OF THE LEADING EDGE SLAT | 2 | |
| NEC 90002 | B767 MLG AFT TRUN, LEAD 3, SINGLE, FR-MF | 1 | |
| Olympus Delta DS-2000 XRF Analyser | Olympus Delta DS-2000 XRF Analyser - Accurately identify alloy graded and pure metals, Suitable for inexperienced operators, Modes for Lead in Paint, Filter Analysis and Soil Analysis | 1 | |
| P2D-HSC6 | LEAD , PHASEC - MINI ROTOGUN | 1 | |
| P2D-P2D-6 | LEAD , PHASEC - MINI ROTOGUN | 1 | |
| P46T-420 | VERTICAL STABILIZER DEICING BOOT COVER (leading edge cover) | 1 | |
| P601-021 | CANOPY COVER (all windows & baggage door, back to horiz. stab. leading edge) | 1 | |
| P601-107 | DORSAL INLET PLUG (in leading edge) | 1 | |
| P601-830 | TRAVEL COVER, Light Weight Canopy Cover (all windows & baggage door, back to horiz. stab. leading edge) | 1 | |
| PM31761 | 3OFF DOCKING HEADSET EXT. LEADS | 1 | |
| PM82245 | LEAD REMOTE EQUIP COOLING FAN SUPPLY | 1 | |
| PSD40-502 | FUEL QTY. TEST LEAD - SP1&4 MAIN TANK | 8 | |
| PSD40-502-1 | FUEL QTY. TEST LEAD - SP2&3 MAIN TANK | 2 | |
| PWA 29317-19 | LEADING EDGE SITTING BLOCK | 1 | |
| PWA 29317-21 | LEADING EDGE SETTING BLOCK | 1 | |
| PWA 52176 | LEAD, SHORTING | 1 | |
| PWA105299 | LEADING EDGE MANUAL | 4 | |
| PWA115296 | THIS TOOL IS USED TO DO A DIMENSIONAL INSPECTION OF THE LEADING EDGE SHAPE | 1 | |
| PWA211804 | LEADING EDGE SHAPE | 1 | |
| PWA29317-19 | LEADING EDGE SETTING BLOCK | 1 | |
| PWA29317-21 | LEADING EDGE SETTING BLOCK | 1 | |
| PWA29646 | GAUGE - INSPECTION, FAN BLADE AND LPT STAGE 3-6 LEADING EDGE RADII | 2 | |
| PWA29914 | CUTTER - CONTOUR, FAN ROTOR LEADING EDGE (10 DEGREES) | 1 | |
| PWA46084 | CUTTER - FAN BLADE FORMING LEADING EDGE (.009 RADIUS) | 1 | |
| PWA46084 REV A | CUTTER - FAN BLADE FORMING LEADING EDGE (.009 RADIUS) | 1 | |
| PWA46316 | CUTTER - FAN BLADE FRMG LEADING EDGE (.014 RADIUS) | 1 | |
| PWA46316 REV D | CUTTER - FAN BLADE FORMING LEADING EDGE (.014 RADIUS) | 1 | |
| PWA46318 | CUTTER - FAN BLADE LEADING EDGE CHAMFER | 2 | |
| PWA46318 REV B | CUTTER - FAN BLADE LEADING EDGE CHAMFER | 1 | |
| PWA463I8 | CUTTER - FAN BLADE LEADING EDGE CHAMFER | 1 | |
| PWA85703 | ACCELEROMETER & LEAD ASSEMBLY - "A" FLANGE & "P" FLANGE PICKUP ENGINE TEST | 1 | |
| PWC34447 | LEADING FIXTURE | 1 | |
| PWC50273 | continuity lead | 1 | |
| R51006-1 | CAUL PLATE - LEADING EDGE, HORIZONTAL AND VERTICAL STABILIZER | 1 | |
| R51006-2 | CAUL PLATE - LEADING EDGE, HORIZONTAL AND VERTICAL STABILIZER | 1 | |
| R51006-3 | CAUL PLATE - LEADING EDGE, HORIZONTAL AND VERTICAL STABILIZER | 1 | |
| RBT18648 | Lead Lag Dampener Bearing Press | 2 | |
| RF69002-R815505 | WIRE LEAD BLOCK POSITIONING TOOL | 1 | |
| RK-2-051 | LEAD, PHASEC 2200 TO MIN-DRV 2M | 1 | |
| RRT094644 | T1000 LEADING EDGE CUTTER HEADS | 1 | |
| S5411275900001 | ENGINE LEADING EDGE ASSY (OF ATR AIRCRAFT) | 1 | |
| S5411275900001TOOL | LEADING EDGE ASSY - ENGINE AIR INTAKE AT | 1 | |
| S5741211700310 | LEADING EDGE ASSY (RH) | 1 | |
| S5741211700401 | LEADING EDGE | 1 | |
| S5741212500295 | LEADING EDGE ASSY (LH) R25-31 | 1 | |
| S5741212500296 | LEADING EDGE ASSY (LH) R25-31 | 1 | |
| S5741212500600 | LEADING EDGE ASSY (LH) R25-31 | 1 | |
| S5741212500810 | LEADING EDGE ASSY (LH) R25-31 | 1 | |
| S5741212501010 | LEADING EDGE ASSY (LH) R25-31 | 1 | |
| S5741212501401 | LEADING EDGE ASSY (LH) R25-31 | 1 | |
| SPL-10165 | LOCK SET-LEADING EDGE SLAT DRIVE | 1 | |
| SPL-1734 | LOCKOUT SET(LEADING EDGE+SLATS+FLAPS ACUATORS | 1 | |
| SPL-2041 | SLING ASSEMBLY, LEADING EDGE SLAT REMOVAL AND INSTALLATION | 1 | |
| SPL-5376 | Test Block Leading Edge Actuator | 1 | |
| SPL-7628 | ELECTRICAL COVERS - LEADING EDGE SLATS, TRAILING E | 1 | |
| SPL-9872 | CHECK LEAD - WIRING HARNESS | 1 | |
| SPL-9873 | CHECK LEAD - WIRING HARNESS | 1 | |
| SPL1734 | LOCK SET-LEADING EDGSLAT/KRUEGER FLA | 1 | |
| SR20-035 | EXTENDED CANOPY COVER, extends to horiz. stab. leading edge | 1 | |
| SR20-042 | EXTENDED CANOPY/ENGINE COVER, extends to horiz. stab. leading edge | 1 | |
| SR22-036 | EXTENDED CANOPY COVER, extends to horiz. stab. leading edge | 1 | |
| SR22-042 | EXTENDED CANOPY/ENGINE COVER, extends to horiz. stab. leading edge | 1 | |
| ST2580-145B | WRENCH MODIFIED - INBOARD LEADING EDGE FLAPS | 1 | |
| STE-220 | WING COVERS (Spandex, fully enclosed, padded leading edge) (set of 4) | 1 | |
| T477W | BONDING METER C/W LEAD MODEL T477W | 12 | |
| TEK-7002 | Probe, Leading/Trailing Edge, Nortec 2000 | 1 | |
| TEK-7002/TF | Probe, Leading/Trailing Edge, Nortec 2000 Triax Connector | 1 | |
| TEK-7009 | Probe, Leading/Trailing Edge | 1 | |
| TL1500DC | FLUKE INSULATED TEST LEADS | 1 | |
| TL220 | INDUSTRIAL TEST LEAD SET | 2 | |
| TLK100 | 17 PIECES TESTING LEAD | 1 | |
| TN623943 | TOOL, WING, LEADING EDGE CONTOUR BOARDS | 2 | |
| U8720742 | WEDGE, LEADING GEAR INSPECTION (NDT) | 1 | |
| U8800601 | S-PC-P14 BONDMASTER PITCH-CATCH PROBE, BROADBAND FREQUENCY, HIGH VOLTAGE, SPRING LOADED TIPS, 15 MM TIP SPACING. TIPS LOCATED .50 INCH FROMLEADINGEDGE | 2 | |
| UCAV-200 | LEADING/TRAILING EDGE PROTECTORS (earlier foam/naugha design) (set of 4) | 1 | |
| UT1430 | REMOTE TERMINAL LEAD | 1 | |
| UT1930 | LEADING EDGE TEST SET | 1 | |
| UT1930-1 | LEADING EDGE TEST SET | 1 | |
| UT1930-2 | LEADING EDGE TEST SET | 1 | |
| UT1930/1 | (LEADING EDGE TEST SET | 1 | |
| UT1931 | LEADING EDGE TEST SET | 1 | |
| WEEL8505LI | LEAD IN HOSE | 1 | |
| WPSL | WI-FI MAINT TASK PWR SUPPLY LEAD TOO | 1 | |
| В78017-1 | INSTALLATION EQPT - BEARING-LEAD SCREW, T/R NONLOCKING ACTUATOR ASSY | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
