| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| CPWA30128-1 | LT PULLER | 1 | |
| PWC30128-15 | LT PULLER | 9 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) IAE1J12188 | Bolt, Puller (CALIBRATION) (CALIBRATION) | 1 | |
| 10898058 | PULLER, IMPELLER AIR / OIL SEPERATOR (WILTON MODEL 303 POWRARM) | 1 | |
| 109040003-109A029A | PULLER, TRANSMISSION OIL FILTER REMOVAL | 1 | |
| 2024444-3 | TRANSFER TUBE PULLER (ASSIST REMOVAL OF TRANSFER TUBES FROM GENERATOR FILTER) | 1 | |
| 21C7046G01 | COMPRESSOR MULTI-PURPOSE HYDRAULIC PULLER | 1 | |
| 21C7046G02 | MULTIPURPOUSE HYDRAULIC PULLER | 1 | |
| 2557781 | HEATED SERVO FILTER PULLER | 1 | |
| 23005023 | ALT #1 BRG AND SEAL PULLER | 3 | |
| 23052520 | Puller – Rotor Alternator | 2 | |
| 23068580 | Puller – Compressor Tie Bolt Stretch | 1 | |
| 23068610 | PULLER, ALTERNATOR ROTOR | 2 | |
| 2433-001 | MULTI-SYSTEM PULLER UNIT | 1 | |
| 28-0-4062 | PULLER CHATTERPROOF BOLT | 1 | |
| 289489-1 | Filter Puller | 1 | |
| 294881-3 | ROTOR AND BEARING MECHANICAL PULLER (REMOVES OIL SLINGER ROTOR AND BEARING FROM COUPLING (ALTERNATE TO 294881-1)) | 1 | |
| 2C6639 | PULLER,FILTER,PNEUMATIC DRIVE MOTOR | 1 | |
| 2C6639-01-A | FILTER PULLER PNEUMATIC | 1 | |
| 2C6639G03 | PULLER FILTER PNEUMATIC DRIVE MOTOR | 4 | |
| 2C81607G01 | ROTOR ALTERNATOR PULLER | 1 | |
| 2MIT65-21816 | BOLT PULLER | 2 | |
| 36-1 | FILTER PULLER | 1 | |
| 3718 | SPLIT LINE BOLT PULLER | 3 | |
| 3G6205G08451GAM | PULLER BOLT REMOVAL | 1 | |
| 41-48565 MTBP | TRUNNION BOLT PULLER | 1 | |
| 42520-167-202 | PULLER – SEAL ALTERNATE HOWELL INSTRUMENTS P/N 42520-167-202 | 2 | |
| 5837820-1 | BOLT PULLER | 3 | |
| 5916714-1 | MAIN GEAR TRUNNION BOLT PULLER | 1 | |
| 5916728-1 | NOSE GEAR TRUNNION BOLT PULLER | 1 | |
| 5916728-501 | NOSE GEAR TRUNNING BOLT PULLER | 5 | |
| 5916733-501/505 | TRUNNION BOLT PULLER | 1 | |
| 5952649-1 | BOLT PULLER | 1 | |
| 595266-1 | FLAP HINGE BOLT PULLER | 1 | |
| 5952666-1 | FLAP HINGE BOLT PULLER | 6 | |
| 5952666-9 | FLAP HINGE BOLT PULLER {ADAPTOR} | 1 | |
| 7040 | ROTOR ALTERNATOR PULLER | 1 | |
| 6796528 | PULLER, ALT DR. SHAFT OUT. RACE | 1 | |
| 6797059 | PUSHER & PULLER - ALTERNATOR | 1 | |
| 6798860 | PULLER-LUBE OIL FILTER CAP | 2 | |
| 6897430 | ALTERNATOR OIL SEAL PULLER | 2 | |
| 68D150104-1001 | FILTER RETAINER PULLER | 1 | |
| 6A3539G02 | PULLER, TIGHT FIT BOLT - BOOSTER | 1 | |
| 856A1308G03 | PULLER (USE IF SEAL IS DIFFICULT TO LOOSEN) | 4 | |
| 856A2336G02 | PULTER - FORWARD ROTATING AIR/OIL SEPARATOR (PULLER) - | 6 | |
| 856A2722 | PULLER COVER FILTER LUBE UN | 1 | |
| 856A2722G01 | PULLER COVER FILTER LUBE UN | 6 | |
| 856A2791G01 | PULLER-MAIN FILTER COVER | 10 | |
| 856A2792 | ALTERNATOR HOUSING BEARING PULLER | 1 | |
| 856A2792G01 | Alternator Bearing Puller | 6 | |
| 856A2956P04 | BOLT PULLER – SPACERS FAN BLADE | 3 | |
| 856A2956P04 | BOLT (PULLER – SPACERS FAN BLADE) | 3 | |
| 856A3362G01 | Adapter Puller Filter | 1 | |
| 856A3793G03 | PUSHER/PULLER FIXTURE – CVT,ANY ALTERNATE PART | 3 | |
| 865A2791 | OIL SCAV FILTER PULLER | 1 | |
| 9429M49G01 | FIXTURE, PULLER BHGE 9429M49G01 АЩК EXHAUST GAS TEMPERATURE PROBE -- (ALTERNATE FOR 2C14898) USED IN WP 1711 00 | 4 | |
| 968.20.11.906 | OIL FILTER HOUSING PULLER | 1 | |
| 968.20.11.913 | PULLER, OIL FILTER ELEMENT | 1 | |
| 98D55307535014 | PULLER BOLT | 1 | |
| 98V27408001000 | THSA main connecting bolt puller | 4 | |
| 9C3167G01 | PULLER, NO.4 BEARING AFT ROTATING OIL SEAL (PULLER)(ALTERNATIVE TO 9C3009G01) | 1 | |
| A32017 | PULLER EQPT – FUSE BOLTS, FWD TRUNNION SUPPORT, MLG | 1 | |
| A32017-1 | PULLER EQUIPMENT - FUSE BOLTS, FORWARD TRUNNION SUPPORT, MAIN LANDING GEAR (MLG) | 16 | |
| A39996 | FILTER PULLER | 1 | |
| AB72001-VW7 | SET, BOLT-PULLERS | 1 | |
| BA-GB745-GB | RIVET PULLER - LOCKBOLT | 1 | |
| C32015-1 | PULLER, FUSE BOLTS, FORWARD TRUNNION SUPPORT, MAIN LANDING GEAR | 14 | |
| C32015-18 | PULLER, FUSE BOLTS, FORWARD TRUNNION SUPPORT, MAIN LANDING GEAR | 11 | |
| C32015-34 | PULLER, FUSE BOLTS, FORWARD TRUNNION SUPPORT, MAIN LANDING GEAR | 5 | |
| CJ134 | PULLER TILT STEERING PIVOT PIN | 1 | |
| CJ2001P | PULLER SET BOLT GRIP | 1 | |
| CPWA30328-1 | Oil Puller, Oil Filter Housing | 1 | |
| CPWA32500-001 | OIL FILTER HOUSING PULLER | 1 | |
| E10285 | PULLER FILTER ASSY | 1 | |
| E2-10-1 | PULLER, CARTRIDGE FILTER | 10 | |
| F623S32 | MLG TORQUE BOLT PULLER | 1 | |
| F70025 | BOLT PULLER KIT | 2 | |
| F70173 | BOLT PULLER ASSY USED TO REMOVE THE FLAP TRACK | 1 | |
| F70173-1 | Boltpuller | 1 | |
| F70180 | BOLT PULLER -0 NACELLE STRUT MID SPAR TO REMOVE | 1 | |
| F70188 | PULLER ASSY -0 THRUST BRACE ATTACH BOLT USED TO | 1 | |
| F7279-2 | PULLER KIT -0 MLG AND TRUNNION BOLT TO PULL MLG | 1 | |
| F72792 | PULLER KIT -0 MLG AND TRUNNION BOLT TO PULL MLG | 1 | |
| F72792-500 | MLG TRUNNION BOLT PULLER | 1 | |
| F72792-501 | Puller-Bolt MLG and Trunnion | 1 | |
| F72792-502 | Puller - Bolt MLG and Trunnion | 1 | |
| F72796-1 | Kit-puller，bolt tension tie | 3 | |
| F72931-1 | BOLT PULLER | 1 | |
| G32038-1 | PULLER - WALKING BEAM BOLT, WING LANDING GEAR | 4 | |
| G513063 | PULLER-COARSE FILTER | 1 | |
| G85D | RIVET PULLER - LOCKBOLT | 1 | |
| G85D-S | RIVET PULLER - LOCKBOLT | 5 | |
| G87D | RIVET PULLER, LOCKBOLT | 4 | |
| GS13063 | PULLER - COARSE FILTER | 1 | |
| GS13063-1 | PULLER, COARSE FILTER | 2 | |
| GS13064 | PULLER - FINE FILTER | 1 | |
| GS13064-1 | PULLER - FINE FUEL FILTER_44.4X139.7MM/0.34KG_[GS13064-1] | 2 | |
| GS21059-1 | FILTER SCREEN PULLER | 1 | |
| GS21575-1 | FILTER PULLER | 1 | |
| GS24682-1 | FILTER ASSY PULLER | 1 | |
| HS 8064 | PULLER V/H FILTER REMOVAL | 2 | |
| HS7521 | PULLER SUPPLY FILTER | 1 | |
| HS7526 | MECHANICAL PULLER - AUXILIARY PUMP FILTER ASSEMBLY AND MAIN AND STANDBY FILTER | 1 | |
| HS8064 | MECHANICAL PULLER - SUPPLY AND STANDBY FILTER | 2 | |
| HS9372 | PULLER-FILTER FLOW DEFLECTOR | 1 | |
| HSA1080 | UNI-CLAMP MULT STUD PULLER | 1 | |
| IAE1J12139 | BOLT, PUSHER/PULLER | 1 | |
| IAE1J12141 | BOLT-PULLER | 16 | |
| IAE1J12187 | BOLT-PULLER | 7 | |
| IAE1J12188 | BOLT-PULLER | 24 | |
| IAE1J12188-1 | BOLT PULLER | 1 | |
| IAE1J12188C | BOLT PULLER SET | 1 | |
| IAE1J12188OHY | BOLT,PULLER | 1 | |
| IAE1J12464 | BOLT PULLER | 1 | |
| IAE1J12494 | BOLT,PULLER | 1 | |
| IAE1J13504-1 | PULLER BOLT | 1 | |
| IAE1J2141 | BOLT PULLER | 1 | |
| LB-20 | MULTI-SYSTEM PULLER UNIT | 5 | |
| LB0A-10 | MULTI-SYSTEM PULLER UNIT | 3 | |
| MBH0-20 | MULTI-SYSTEM PULLER UNIT | 1 | |
| MIT65B01204-1 | PULLER - WALKING BEAM BOLT, WING LANDING GEAR | 6 | |
| PM51069 | PULLER REMOVAL OF BOLT BACB30US12K70 | 1 | |
| PUL1340 | BOLT PULLER | 1 | |
| PUL2450 | Boltless Strut Tower Puller | 1 | |
| PWA101715 | PULLER MECHANICAL EEC ALTERNATOR ROTOR REMOVAL | 1 | |
| PWA25005 | PULLER SEAL RETAINER ALTERNATOR DRIVE | 1 | |
| PWA25731 | PULLER - ALTERNATOR DRIVE SEAL RETAINER | 1 | |
| PWA25731C | PULLER KNOCKER - MGB ALT DR SEAL & RET_[PWA25731C] | 1 | |
| PWA26525 | PULLER-MAIN OIL FILTER STRAINER | 2 | |
| PWA28461 | PULLER - ENG SUPPORT BOLT_[PWA28461] | 1 | |
| PWA45248 | PULLER - INNER LINER BOLTS | 5 | |
| PWA45520 | PUSHER / PULLER (Alternate to PWA 45017) | 3 | |
| PWA80014 | PULLER KNOCKER PERMENANT MAGNETIC ALTERNATOR SEAL RETAINER | 1 | |
| PWA86459 | PULLER - FILTER, FUEL DISTRIBUTION VALVE | 6 | |
| PWC 30556 | OIL FILTER PULLER | 9 | |
| PWC 38077 | PULLER , ALT DRIVE OIL | 13 | |
| PWC 50726 | OIL FILTER HOUSING PULLER | 8 | |
| PWC-30556 | KNOCK PULLER-ENGINE OIL FILTER | 9 | |
| PWC-50726 | KNOCK PULLER OIL FILTER HOUSING | 8 | |
| PWC30128-03 | PW305A TIE BOLT PULLER | 2 | |
| PWC30128-14 | PULLER, T-HANDLE - FILTER | 12 | |
| PWC30128-4 | PULLER T-HANDLE PLUG (REMOVAL OF OIL FILTER BYPASS) | 4 | |
| PWC30228 | Puller – Oil Filter House | 4 | |
| PWC30328 | PULLER, OIL FILTER HOUSING | 3 | |
| PWC30403 | BOLT ACT PULLER | 13 | |
| PWC30443 | PULLER, FUEL PUMP FILTER | 1 | |
| PWC30444 | PULLER, FUEL PUMP FILTER | 1 | |
| PWC30556 | KNOCKER PULLER - ENGINE OIL FILTER | 9 | |
| PWC30556-2 | OIL FILTER PULLER | 4 | |
| PWC31262 | PULLER, REAR ENGINE MOUNT BOLT | 1 | |
| PWC32111 | BOLT ACTION PULLER | 5 | |
| PWC32320 | Bolt Action Puller | 3 | |
| PWC32824 | Bolt Action Puller M-2.7 | 1 | |
| PWC37981 | Puller, Filter Bypass Sleeve | 7 | |
| PWC38077 | PULLER ALTERNATOR DR. OIL SEAL CARRIER | 13 | |
| PWC38077B | PULLER, ALTERNATOR DRIVE OIL SEAL CARRIER | 3 | |
| PWC38079 | PULLER ALTERNATOR DR. OIL SEAL CARRIER | 13 | |
| PWC40515 | PULLER FUEL FILTER | 3 | |
| PWC42194 | Puller Bolt Action | 4 | |
| PWC45038 | PULLER, FILTER BYPASS SLEEVE | 7 | |
| PWC48468 | PULLER, SPLINED ADAPTER (ALTERNATE TO PWC61512) | 4 | |
| PWC50148 | BOLT ACTION PULLER | 3 | |
| PWC50588 | PULLER (ALTERNATE PN: PWC32123) | 4 | |
| PWC50589 | PULLER, DISC (ALTERNATE PN: PWC32121) | 5 | |
| PWC50714 | PULLER (ALTERNATE PN: PWC32472) | 9 | |
| PWC50726 | Oil Puller, Oil Filter Housing | 8 | |
| PWC50726-100 | PULLER OIL FILT HOUSIN | 4 | |
| PWC50726-200 | PULLER - OIL FILTER | 2 | |
| PWC54111 | BOLT ACTION PULLER M-14 | 1 | |
| PWC54246 | PULLER/PUSHER, TUBES (ALTERNATIVE TO PWC32366) | 7 | |
| PWC57233 | PULLER-MULTI PURPOSE | 9 | |
| PWC62976 | PULLER, COVER-FUEL FILTER | 4 | |
| PWC64056 | Bolt Action Puller | 3 | |
| PWC64247 | PULLER - ENGINE FILTER (SERIES 400) | 9 | |
| PWC66949 | PULLER, OIL FILTER BYPASS VALVE (REMOVAL OF OIL FILTER BYPASS) | 4 | |
| PWC67645 | REMOVE FRONT SEAL ALTERNATOR SHAFT, PULLER | 1 | |
| PWC70896 | OIL FILTER ELEMENT PULLER | 3 | |
| RB6798860 | Puller-Lube Oil Filter Cap | 2 | |
| RB6897857 | Torquemeter Filter Screen Puller | 1 | |
| RBW6205G08451-3G | Puller Bolt Removal | 2 | |
| SPL-1868 | PULLER, FUSE BOLTS, FORWARD TRUNNION SUPPORT, MAIN LANDING GEAR | 1 | |
| SPL-9117 | PULLER, FUSE BOLTS, FORWARD TRUNNION SUPPORT, MAIN LANDING GEAR | 1 | |
| ST1012B-8-1 | BOLT PULLER | 1 | |
| ST1012B6-1 | BOLT PULLER | 1 | |
| ST2567B-1 | BOLT PULLER | 3 | |
| ST2567B-2 | BOLT PULLER | 2 | |
| ST2567B-3 | BOLT PULLER | 1 | |
| ST2567B1 | Bolt Puller | 3 | |
| ST2567B2 | Bolt Puller | 2 | |
| STP1157 | FLAP ACTUATOR PIVOT BOLT PULLER | 1 | |
| U0027A | PULLER WING BOLT | 1 | |
| YA22350C | DENT PULLER SYSTEM 110 VOLT | 1 | |
| PWA26525 | PULLER - MAIN OIL FILTER STRAINER | 2 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
