| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| A32101-13 | LOCK TAB | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| F80027-18 | Lock Eqpt - Horizontal Stabilizer | 18 | |
| (CALIB) 98S27105002000 | AILERON BLOCKING TOOL (SPRG TAB) | 1 | |
| (CALIB) J55002-37 | LOCK AY, HORIZONTAL STABILIZER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K55002-45 | LOCK - HORIZONTAL STABILIZER (CALIBRATION) (CALIBRATION) | 1 | |
| 1159GSE50240-1 | HORIZONTAL STABILIZER STOP BLOCK | 2 | |
| 13986 | 1/4'' HI-LOCK RATCHET WITH ADJUSTABLE FLEX HEAD | 1 | |
| 2001535 | TB1 flyaway, portable aluminum towbar with shock-absorbing hitch and limited tow-eye rotation. Bar consists of (2) 5 foot sections with retaining sleeve and additional ball lock pin for use in assembling bar when put into service. 60,000 lbs. (27,215 k | 1 | |
| 2001561 | TB125-10 flyaway, portable aluminum towbar with shock-absorbing hitch and limited tow-eye rotation. Bar consists of (2) 5 foot sections with retaining sleeve and additional ball lock pins for use in assembling bar when put into service. 125,000 lbs. (5 | 1 | |
| 0301521470 | TAB,LOCKING | 1 | |
| 256A2004AT2 | Lock Washer Tab Set Tool | 1 | |
| 256A2261AT20 | Lock Washer Tab Set Tool | 1 | |
| 27-01-3679 | LOCK TOOL AIL SPRING TAB (MV7627-5-02) | 1 | |
| 27-1-3679 | LOCK TOOL AIL SPRING TAB | 2 | |
| 27.1-3679 | LOCKTOOL,AILERON SPRINGTAB F50 | 2 | |
| 2ME65B18302 | MECHANICAL EQUIPMENT - LOWER RUDDER TO TAB LOCK | 1 | |
| 2ME65B18304 | MECHANICAL EQUIPMENT - UPPER RUDDER TO TAB LOCK | 1 | |
| 31-54149-1 | LOCK PLATE HORIZ. STAB. GEAR BOX | 1 | |
| 35-92018-0001 | VERTICAL STABILIZER LOCKING | 1 | |
| 35-92117-0001 | Hor. Stabilizar locking | 1 | |
| 35-92118-0001 | Vert. Stabilizar locking | 1 | |
| 369H9928 | TAB BENDER WITH PLASTIC BLOCK | 1 | |
| 381873AT1 | Lock Washer Tab Set Tool | 1 | |
| 4916750-1 | HORIZONTAL STAB LOCK | 4 | |
| 4916750-1 (IN 0008154) | HORIZONTAL STAB LOCK | 1 | |
| 4916750-9 | HORZ. STAB LOCK ATTACH BRACKET | 1 | |
| 6797589 | FIXTURE – BENDING, SUN GEAR HUB LOCK TAB | 2 | |
| 6799868 | BENDING TORQUEMETER-TO-SAFETY COUPLING MOUNTING BOLT LOCKTAB FIXTURE | 1 | |
| 718-1523-002 | CARD, PCMCIA HGI DATABASE CMU BLOCK 0.82 P/N 718-1523-002 | 2 | |
| 718-1523-004 | CARD, PCMCIA HGI DATABASE CMU BLOCK 1.29 | 1 | |
| 718-1524-002 | CARD, PCMCIA AMI DATABASE CMU BLOCK 0.82 P/N 718-1524-002 | 2 | |
| 718-1524-005 | CARD, PCMCIA AMI DATABASE CMU BLOCK 1.29 | 1 | |
| 802-0137 | LOCKHEED L209 PRA PORTABLE RACK ADP | 1 | |
| 856A3561 | WRENCH STALOCK TAB WASHER HORI | 1 | |
| 856A3563 | TOOL R/I STALOCK TAB WASHER HO | 1 | |
| 857420-009 | PIVOT BLOCK, TABLE, I AT | 1 | |
| 91ACP | 9" ADJUSTABLE JOINT INTERLOCKING CHANNEL PLIERS (RED) | 2 | |
| 95-92012-0001 | HORIZONTAL STABILIZER LOCKING | 1 | |
| 95-92012-0002 | HORIZONTAL STABILIZER LOCKING | 1 | |
| 98D27403500000 | LOCK-STAB TRIM WHEEL | 37 | |
| 98S27105002000 | AILERON BLOCKING TOOL (SPRG TAB) | 4 | |
| 99F54503000000 | CALIBRATION BLOCK SHAFT-ADJUSTABLE MINI ROTATING PROBE | 2 | |
| A32088 | MAINTENANCE LOCK RETRACTABLE TAIL SKID | 1 | |
| A32088-1 | MAINTENANCE LOCK - RETRACTABLE TAIL SKID | 1 | |
| A32088-3 | RETRACTABLE TAIL LOCK | 2 | |
| A32088-7 | MAINTENANCE LOCK - RETRACTABLE TAIL SKID | 12 | |
| A32103-1 | LOCKOUT PIN - FORWARD AND AFT LOCK LINK, RETRACTABLE TAIL SKID | 1 | |
| A3T-27-001 | STABILIZER PULLEY WHEEL LOCKOUT CLAMP | 1 | |
| A3T-27-001-001 | STABILIZER WHEEL LOCKOUT | 1 | |
| A3T-27-001−001 | STABILIZER WHEEL LOCKOUT | 1 | |
| A3T-27−001−001 | STABILIZER WHEEL LOCKOUT | 1 | |
| A3T27-001-001 | STABLIILIZER WHEEL LOCKOUT | 1 | |
| A3T−27−001−001 | STABILIZER WHEEL LOCKOUT | 1 | |
| A55001 | LOCK EQUIPMENT HORIZONTAL STABILIZER | 1 | |
| A55001-1 | HORIZONTAL STAB. LOCK EQUIP | 1 | |
| A55001-19 | LOCK EQUIPMENT - HORIZONTAL STABILIZER | 4 | |
| A55001-22 | LOCK EQUIPMENT - HORIZONTAL STABILIZER | 14 | |
| A55001-34 | STAB LOCK TOOL | 3 | |
| A55001-47 | LOCK EQUIPMENT - HORIZONTAL STABILIZER | 9 | |
| A55001-47/-22 | LOCK EQUIP HORIZ STAB | 1 | |
| AF-5222 | FLEXIBLE ROTARY FLAT BOTTOM PROBE SPLIT END, EXPANDABLE FROM .187"-.205" WITH ADJUSTABLE COLLAR GUIDE BLOCK. 5.0" LONG STEEL 4 PIN FISCHER CONNECTOR 100KHz-2MHz. Includes Test Report and Certificate of Conformance | 1 | |
| AF-5222-1 | FLEXIBLE ROTARY FLAT BOTTOM PROBE SPLIT END, EXPANDABLE FROM .187"-.200" WITH ADJUSTABLE COLLAR GUIDE BLOCK. 5.0" LONG STEEL 4 PIN STEP LEMO CONNECTOR 100KHz-2MHz. Includes Test Report and Certificate of Conformance | 1 | |
| AGE-00076-003 | TORQUE-WRENCH, STAB. JOINT LOCK NUT | 3 | |
| AGE‐00076‐003 | TORQUE‐WRENCH, STAB. JOINT LOCK NUT | 3 | |
| AWP120 | PLIERS, ADJUSTABLE JOINT, 12" (CHANNEL LOCKS) | 3 | |
| AWP65 | PLIERS, ADJUSTABLE JOINT, 7" (CHANNEL LOCKS) | 2 | |
| B32069-8 | LOCKOUT PIN - FORWARD AND AFT LOCK LINK, RETRACTABLE TAIL SKID | 6 | |
| BACS38K6 | STRAP - PLASTIC, ADJUSTABLE, SELF-LOCKING,27.50 IN | 2 | |
| BETA1052-140MM | ADJUSTABLE SELF-LOCKING PLIERS140MM | 1 | |
| C27019-1 | TAB BENDING EQUIPMENT - LOCK WASHER, L.E. SLAT ACT | 3 | |
| C27019-1PM | TAB BENDING, EQUIP, LOCKING WASHER, LE SLAT ACT | 1 | |
| C27044-6 | BLOCK, AFT STAB BAR | 1 | |
| C27047-42 | STABILIZER FLIGHT SPOILER SCTUATOR LOCK SET | 13 | |
| C71020-21 | STABILIZER LOCK PIN | 1 | |
| CEF 8676M3 | ECHS LOCK PORTABLE CALIBRATION | 1 | |
| CEF-8676M3 | ECHS LOCK PORTABLE CALIBRATION | 1 | |
| CEF8676M3 | ECHS LOCK PORTABLE CALIBRATION | 1 | |
| CH723-435 | PIN LOCKING TRIMMABLE HORIZONT STABI SCREW JACK M CON | 1 | |
| D-10861 | VENT VALVE LOCKING TAB TESTER | 1 | |
| F71267 | WRENCH ASSY, PINION GEAR, STABILIZER TRIM ACTUATOR (LOCK) | 25 | |
| F71336 | LOCK ASSY STABILIZER TRIM | 1 | |
| F71336-500 | Lock Assembly - Stabilizer Trim | 3 | |
| F71336-501 | Lock Assembly - Stabilizer Trim | 29 | |
| F71336-501-M | STABILIZER TRIM LOCK | 1 | |
| F71338-501 | LOCK - STAB TRIM | 1 | |
| F71366-501 | LOCK ASSY STAB TRIM | 1 | |
| F72703 | STABILIZER LOCK OUT TOOL | 1 | |
| F72703-1 | STABILIZER LOCK OUT TOOL | 1 | |
| F72748 | Ground lock-retractable tail skid | 1 | |
| F80-0-1874 | LE Slat Actuator Lock Washer Tab Bending Tool | 1 | |
| F80-0-1875 | LE Slat Actuator Lock Washer Tab Bending Tool | 1 | |
| F80027 | LOCK EQPT HORIZONTAL STABILIZER | 1 | |
| F80027 | Lock Assembly - Horizontal Stabilizer | 1 | |
| F80027-1 | HORIZONTAL STAB LOCK | 2 | |
| F80027-13 | LOCK - HORIZ STAB | 8 | |
| F80027-14 | UPPER LOCK ASSY FOR HORIZ. STAB | 1 | |
| F80027-18 | Lock Equipment - Horizontal Stabilizer | 18 | |
| F80027-19 | LOCK STAB HORIZONTAL | 3 | |
| F80027-2 | LOCK ASSEMBLY HORIZONTAL STAB | 1 | |
| F80027-2 OR 13 | HORIZONTAL STABILIZER LOCK ASS'Y | 1 | |
| F80027-20 | LOCK STAB HORIZONTAL | 1 | |
| F80027-41 | LOCK EQUIPMENT - HORIZONTAL STABILIZER | 10 | |
| F80027-44 | LOCK EQUIPMENT - HORIZONTAL STABILIZER | 9 | |
| F8027-41 | HORIZONTAL STABILIZER LOCK ASSEMBLY | 1 | |
| FL-ADJ-46 | ADJUSTABLE HEIGHT FLOOR LOCK | 1 | |
| FLR640-1 | LOCK RING LEG, 2 TAB | 1 | |
| FLR640-2 | LOCK RING LEG, 1 TAB | 1 | |
| G0142710001 | KIT, AILERON BALANCE TAB CONTROL LOCKING | 1 | |
| G32028-164 | JACK WLG BLG GLAND NUT LOCK TABS | 4 | |
| J27002-1 | LOCK, HORIZONTAL STABILIZER ACTUATOR BALL NUT | 12 | |
| J27002-14 | Ball nut lock-actuator，horizontal stabilizer | 2 | |
| J270021 | LOCK - HORIZONTAL STAB ACT BALL NUT | 12 | |
| J32071-10 | LOCKOUT PIN - FORWARD AND AFT LOCK LINK, RETRACTABLE TAIL SKID | 11 | |
| J47231 | CASTELLATED WRENCH FOR ADJUSTABLE END FITTING ON TELESCOPIC LOCKING STRUT (NLG) | 1 | |
| J55002 | LOCK ASSY-HORIZONTAL STABILIZER | 1 | |
| J55002-1 | LOCK ASSEMBLY - HORIZONTAL STABILIZER | 8 | |
| J55002-21 | Assembly Lock Horiz Stabilizers | 1 | |
| J55002-36 | LOCK ASSEMBLY - HORIZONTAL STABILIZER | 9 | |
| J55002-37 | LOCK ASSEMBLY - HORIZONTAL STABILIZER | 10 | |
| J55002-53 | LOCK ASSEMBLY - HORIZONTAL STABILIZER | 8 | |
| J55002-59 | LOCK ASSEMBLY - HORIZONTAL STABILIZER | 9 | |
| J5500237 | LOCK ASSEMBLY - HORIZONTAL STABILIZER | 10 | |
| K27016 | LOCK HORIZONTAL STABILIZER ACTUATOR BALL NUT | 1 | |
| K27016-1 | LOCK - HORIZONTAL STABILIZER ACTUATOR BALL NUT | 9 | |
| K27016-1 | LOCK-HORIZONTAL STABILIZERACTUATOR BALL NUT | 9 | |
| K27016-2 | LOCK-HORIZONTAL STABILIZER ACTUATOR BALL NUT | 1 | |
| K27016-4 | LOCK-HORIZONTAL STABILIZER ACTUATOR BALL NUT | 1 | |
| K55002 | LOCK HORIZONTAL STABILIZER | 1 | |
| K55002-1 | LOCK HORIZONTAL STABILIZER | 1 | |
| K55002-10 | LOCK ASSY-HORIZONTAL STABILIZER | 1 | |
| K55002-11 | LOCK ASSY-HORIZONTAL STABILIZER | 1 | |
| K55002-12 | LOCK ASSY-HORIZONTAL STABILIZER | 1 | |
| K55002-13 | LOCK ASSY-HORIZONTAL STABILIZER | 1 | |
| K55002-14 | LOCK ASSY-HORIZONTAL STABILIZER | 1 | |
| K55002-15 | LOCK ASSY-HORIZONTAL STABILIZER | 1 | |
| K55002-16 | LOCK ASSY-HORIZONTAL STABILIZER | 1 | |
| K55002-17 | LOCK ASSY-HORIZONTAL STABILIZER | 1 | |
| K55002-2 | Lock Assembly -Horizontal Stabilizer | 4 | |
| K55002-3 | LOCK ASSY-HORIZONTAL STABILIZER | 1 | |
| K55002-32 | LOCK ASSY-HORIZONTAL STABILIZER | 1 | |
| K55002-39 | LOCK ASSY-HORIZONTAL STABILIZER | 1 | |
| K55002-40 | LOCK ASSY-HORIZONTAL STABILIZER | 1 | |
| K55002-41 | LOCK ASSY-HORIZONTAL STABILIZER | 1 | |
| K55002-45 | LOCK ASSEMBLY - HORIZONTAL STABILIZER | 10 | |
| K55002-46 | LOCK ASSEMBLY - HORIZONTAL STABILIZER | 6 | |
| K55002-5 | LOCK ASSY-HORIZONTAL STABILIZER | 1 | |
| K55002-58 | LOCK ASSEMBLY - HORIZONTAL STABILIZER | 4 | |
| K55002-59 | LOCK ASSEMBLY - HORIZONTAL STABILIZER | 4 | |
| K55002-7 | LOCK ASSY-HORIZONTAL STABILIZER | 1 | |
| K55002-8 | LOCK ASSY-HORIZONTAL STABILIZER | 1 | |
| K55002-9 | LOCK ASSY-HORIZONTAL STABILIZER | 1 | |
| ME65B80713-1 | LOCK - BALLNUT, HORIZONTAL STABILIZER ACTUATOR | 8 | |
| OU190359 | STAB LOCK O POSITION TOOL | 4 | |
| PLIERS, ADJUSTABLE JOINT, INTERLOCKING CHANNEL, INDUSTRIAL FINISH, 9 1/4" | PLIERS, ADJUSTABLE JOINT, INTERLOCKING CHANNEL, INDUSTRIAL FINISH, 9 1/4" | 1 | |
| PWA 25286 | LOCK TAB CRIMPER | 2 | |
| PWA26233 | CRIMPER - HPC, TIEROD NUT TABLOCK 15TH_[PWA26233] | 2 | |
| PWA27889 | ADAPTER,PLATE - FRT COMP DISK TABLOCK_[PWA27889] | 2 | |
| PWA27890 | ANVIL,BACKUP - LPC 1.5 STG BLADE TABLOCK_[PWA27890] | 2 | |
| PWA27891 | PUNCH,PREBEND - LPC 1.5 STG BLD TABLOCK_[PWA27891] | 2 | |
| PWA27892 | PUNCH,FINISH - LPC 1.5 STG BLADE TABLOCK_[PWA27892] | 2 | |
| PWA27893 | ADAPTER,PLATE - LPC 3RD STG BLD TABLOCK_[PWA27893] | 2 | |
| PWA27894 | ANVIL,BACKUP - LPC 3RD STG BLADE TABLOCK_[PWA27894] | 2 | |
| PWA27895 | ADAPTER,PLATE - LPC 4TH BLADE TABLOCK_[PWA27895] | 2 | |
| PWA27917 | ADAPTER, PLATE - LPC BLADE TABLOCK_[PWA27917] | 2 | |
| PWA27919 | ANVIL,BACKUP - LPC 3RD STG BLD TABLOCK_[PWA27919] | 2 | |
| PWC30458 | TABBING/LOCKING TOOL | 10 | |
| PWC30458-A | TABBING/LOCKING TOOL | 1 | |
| Q47244 | WRENCH FOR ADJUSTABLE END FITTING LOCK NUT OF RETRACTION STRUT (MLG) | 1 | |
| RBH9928 | Tab Bender With Plastic Block | 4 | |
| RBH9928-101-111 | Tab Bender Block | 1 | |
| RBH9928-12 | Tab Bender 12" Long With Plastic Block | 2 | |
| RSMVS12-15 | CALIBRATION BLOCK SHAFT-ADJUSTABLE MINI ROTATING PROBE | 1 | |
| SK601-10021 | CALIBRATION REFERENCE BLOCK SET (TAIL SECTION / HORIZONTAL STABILIZER) - SK601-10021 SERIES (BLOCKS 1 - 5) | 1 | |
| SL90-313-1-0000 | TOOL-INSTAL° TAB WASHER STA-LOCK(SJN-163) | 8 | |
| SL90-313-1.2500 | Install tool TAB Washers Sta-Lock NSA5454 | 3 | |
| SL90-313-3750 | TOOL INSTALLATION TAB WASHER STA-LOCK NSA 5454 | 17 | |
| SL90-313-5625 | STA LOCK INSTALL TOOL TAB WSHR | 22 | |
| SL90-314-1-0000 | TOOL-EXTRACT° TAB WASHER STA-LOCK(SJN-162) | 9 | |
| SPL-1678 | ASSEMBLY - LOCK, HORIZONTAL STABILIZER | 1 | |
| SPL-1693 | LOCK EQUIPMENT, HORIZONTAL STABILIZER ACTUATOR BALL NUT | 1 | |
| SPL-5375 | LE Slat Actuator Lock Washer Tab Bending Tool | 1 | |
| SPRT500 | RETRACTABLE PLUNGER/NON-LOCKING | 1 | |
| TBT04 | 4PC LOCKING PLIERS & ADJUSTABLE WRENCH SET WITH TOOL TRAY | 1 | |
| TOV 915422 | LOCKING WEDGE.TEST EQUIPMENT, ELEVATOR TRIM TAB | 1 | |
| UH60-121 | STABILIZER GAP PLUG (Bird Blocker Plug) | 1 | |
| X56122267 | PULLER-OIL COOLER LOCK TAB REMOVAL | 1 | |
| f 71336-501 | Lock Assy Stabilizer Trim | 29 | |
| f 80027-1 | lock assy-horizontal stab | 2 | |
| f71336-501 | Lock Assy Stabilizer Trim | 29 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
