| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 79B050074 | LOCK SIDE | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 14-6847-6000 | Pin, Gnd Lock Side Brace | 3 | |
| 14ME65-72761-1 | MLG SIDE STRUT DOWNLOCK OPEN | 1 | |
| 214FC | SET, WRENCH, CROWFOOT OPEN END WITH SIDE LOCK HOLE | 2 | |
| 3ME65B05730-1 | OUTBOARD ELEVATOR ACTUATOR LOCK ASSY LEFT SIDE | 7 | |
| 3ME65B05730-2 | OUTBOARD ELEVATOR ACTUATOR LOCK ASSY RIGHT SIDE | 7 | |
| 8927 | Replacement Lock Chucks (Type: T-Handle) (Thread: .485"-26) (Side hose connector: 3/8"-24) (Add to cart: Add To Cart) | 4 | |
| 9043 | Replacement Lock Chucks (Type: T-Handle) (Thread: .485"-26) (Side hose connector: 3/8"-24) (Add to cart: Add To Cart) (Type: T-Handle) (Thread: .305"-32) (Side hose connector: 3/8"-24) (Add to cart: Add To Cart) | 3 | |
| 460005837 | LOCKING BAR SIDE STAY LEFT HAND | 1 | |
| 460007325 | LOCK SIDE STAY | 7 | |
| 2143E4530 | GROUND LOCK PIN.SIDE STAY ASSY.WING LANDING GEAR | 1 | |
| 2144E5506 | GROUND LOCK PIN.SIDE STAY ASSY.WING LANDING GEAR | 1 | |
| 69741-1 | SPACER BLOCK (LEFT SIDE) D30665-SERIE CMM 25-61-20 | 1 | |
| 69741-3 | SPACER BLOCK (RIGHT SIDE)D30665-SERIE CMM 25-61-20 | 1 | |
| 70198-101 | ASPIRATOR SPACER BLOCKS LEFT SIDE | 1 | |
| 70198-103 | ASPIRATOR SPACER BLOCKS LEFT SIDE | 1 | |
| 8-27236A | BLACK SIDE LOCK BAR | 1 | |
| 82693-10 | SIDE LOCK ASSY | 1 | |
| 98D2790 3500 000 | PIN SIDE STICKING LOCKING | 38 | |
| 98D27903500 | PIN SIDE STICK LOCKING | 1 | |
| 98D27903500000 | PIN-SIDE STICK LOCKING | 38 | |
| 98D279035000000 | PIN SIDE STICK LOCKING | 1 | |
| 98D27903500000A | PIN-SIDE STICK LOCKING | 1 | |
| 98L27901001000 | PIN,LOCKING-SIDE STICK | 11 | |
| 98L279010010000 | SIDE STICK LOCK | 1 | |
| 98P10003003000 | PIN SIDE STICK LOCKING | 1 | |
| 98P27903500000 | PIN SIDE STICK LOCKING | 1 | |
| 98S51605001-206 | MINI ANGLE BEAM ALUMINUM V2 BLOCK ½" (12.5mm) or 1" (25.4 mm) thick, 1" radius opposite 2" radius, with 5/64" diameter side drilled hole (3/4" deep flat bottom hole in 1" thick version). Aluminum 7075-T6. Includes form fitted case. | 3 | |
| 98S51605001-208 | MINI ANGLE BEAM BLOCK CS V2 BLOCK..½" (12.5mm) or 1" (25.4 mm) thick, 1" radius opposite 2" radius, with 5/64" diameter side drilled hole (3/4" deep flat bottom hole in 1" thick version).1018 Carbon Steel with form fitted case | 3 | |
| A32063-7 | TEST FIXTURE - SIDE AND DRAG BRACE LOCK ACTUATOR, MAIN LANDING GEAR (MLG) | 1 | |
| AFNDT-2050AL | MINI ANGLE BEAM ALUMINUM V2 Calibration Block, 7075 Aluminum, Metric (Side Drilled Hole Thickness - 12.5mm. Includes Certificate of Conformance and Material Certification Report. Supplied with wood case. | 1 | |
| AFNDT-3119AL | Aluminum Dynamic Split Hole Reference Block. Material: 7075-T651 aluminum. 16 Holes with 1/16" Cross Drilled Holes on both sides. Hole Sizes: 4.5mm, 5.0mm, 6.0mm, 6.5mm, 7.0mm, 7.5mm, 8.0mm, 9.0mm, 10mm, 12mm, 14mm, 16mm, 20mm, 22mm, 24mm. Tolerance +/... | 1 | |
| AFNDT-3119TI | Titanium Dynamic Split Hole Reference Block. Material: 6Al-4v Titanium. 16 Holes with 1/16" Cross Drilled Holes on both sides. Hole Sizes: 4.5mm, 5.0mm, 6.0mm, 6.5mm, 7.0mm, 7.5mm, 8.0mm, 9.0mm, 10mm, 12mm, 14mm, 16mm, 20mm, 22mm, 24mm. Tolerance +/- .... | 1 | |
| AFNDT-3157 | Liquid Penetrant Standard. Meets the ASME Boiler Pressure Code, Section V & III, and MIL-I-23135-C. The cracked aluminum block is made from 2024 aluminum and is 3” x 2” x 3/8” thick. A 1/8" wide groove separates the blocks two sides to facilitate side-... | 1 | |
| AFNDT-DAC/1018 | Used for establishment of primary reference responses for UT examination of..welds. Block contains three DAC side-drilled holes at 1.5” deep minimum at..diameters between 3/32” and 1/4” depending on the block thickness (T). Hole..locations through the ... | 1 | |
| AFNDT-IIW-01AL | ALUM. IIW TYPE 1 TEST BLOCK.. Aluminum Ultrasonic IIW Type 1 Test Block 7075-T6 Aluminum. 1 "x 4"x 12". Contains 2" diameter hole and 4" radius. Also, 1/8" x 1" radius alternate reflector and 1/16" deep on echo side. Meets ASTM-E-164, MIL-STD-2154 a... | 1 | |
| AFNDT-IIW-01CS | IIW TYPE 1 TEST BLOCK.. Aluminum Ultrasonic IIW Type 1 Test Block 1018 Carbon Steel. 1 "x 4"x 12". Contains 2" diameter hole and 4" radius. Also, 1/8" x 1" radius alternate reflector and 1/16" deep on echo side. Meets ASTM-E-164, MIL-STD-2154 and AW... | 1 | |
| AFNDT-ROMPAS-7075-T6 | ROMPAS BLOCK, 7075-T6 ALUMINUM ½" (12.5mm) or 1" (25.4 mm) thick, 1" radius opposite 2" radius, with 5/64" diameter side drilled hole (3/4" deep flat bottom hole in 1" thick version). SPECIFICATION: ASTM E-164. (Includes wooden case) | 1 | |
| CAT5917-6-A | MLG SIDEBRACE DOWNLOCK SPRING PULLER KIT | 1 | |
| FA276-01821 | TOOL, SIDEWALL MASK LOCKER | 1 | |
| FA276-01821-00 | TOOL, SIDEWALL MASK LOCKER | 1 | |
| FA276-01821 | TOOL, SIDEWALL MASK LOCKER | 1 | |
| G28019-27 | SIDE CLAMP BLOCK | 1 | |
| G28019-51 | SIDE CLAMP BLOCK | 1 | |
| GS-18008 | OUTSIDE CALIPERS. LOCK JOINT TYPE. | 1 | |
| J32013 | SIDE STRUT ADJUSTMENT EQPT-DRAG STRUT LOCK LINK ASSY, MLG | 1 | |
| J32013-1 | SIDE STRUT ADJUSTMENT EQUIPMENT - DRAG STRUT LOCK LINK ASSEMBLY, MAIN LANDING GEAR | 13 | |
| J32013-13 | SIDE STRUT ADJUSTMENT EQPT-DRAG STRUT LOCK LINK ASSY, MLG | 1 | |
| J32018 | ADJUSTMENT EQPT DOWNLOCK STOP MLG SIDE & DRAG STRUTS | 1 | |
| J32018-14 | ADJUSTMENT EQUIPMENT - DOWNLOCK STOP, MAIN LANDING GEAR SIDE AND DRAG STRUTS | 13 | |
| J32018-19 | ADJUSTMENT EQUIPMENT - DOWNLOCK STOP, MAIN LANDING GEAR SIDE AND DRAG STRUTS | 12 | |
| J32018-28 | Adjustment eqpt-downlock stop MLG side & drag struts | 2 | |
| J32037-8 | FITTING ASSY,SIDE STRUT/LOCK LINK | 1 | |
| J32105-1 | Side strut adjustment equipment-drag strut lock link assembly,MLG | 1 | |
| J55004-7 | Lock Assy, Inbd Side | 1 | |
| J55004-8 | Lock Assy, Outbd Side | 1 | |
| K32018 | SIDE STRUT ADJUSTING EQPT- DRAG STRUT LOCK LINK | 1 | |
| K32018-35 | SIDE STRUT ADJUSTING EQUIPMENT - DRAG STRUT LOCK LINK ASSEMBLY, MAIN LANDING GEAR | 1 | |
| K32018-42 | SIDE STRUT ADJUSTING EQUIPMENT - DRAG STRUT LOCK LINK ASSEMBLY, MAIN LANDING GEAR | 1 | |
| K32018-59 | SIDE STRUT ADJUSTING EQUIPMENT - DRAG STRUT LOCK LINK ASSEMBLY, MAIN LANDING GEAR | 3 | |
| K55001-8 | LOCK ASSY,INBD SIDE | 1 | |
| K55001-9 | LOCK ASSY,OUTBD SIDE | 1 | |
| M46345 | LOCATING PIN FOR THE ADJUSTMENT OF THE SIDE PLAY OF THE LOCK ASSEMBLY | 3 | |
| MAB-CS | ROMPAS BLOCK, 7075-T6 or 7075-T73 ALUMINUM ½" (12.5mm) or 1" (25.4 mm) thick, 1" radius opposite 2" radius, with 5/64" diameter side drilled hole (3/4" deep flat bottom hole in 1" thick version). SPECIFICATION: ASTM E-164. (Includes wooden case). Note: | 1 | |
| STD-1278 | BLOCK - LOADING, 1/8 INCH THICK, 3 INCH BY 3 INCH WOOD OR FIBERGLASS BLOCK WITH PAD TO PREVENT DAMAGE TO THE SKIN. STD-1278 HOSE - VACUUM, 1/4 INCH INSIDE DIAMETER (ID) PLASTIC TUBE | 1 | |
| V2-AL | MINI ANGLE BEAM ALUM V2 BLOCK ½" (12.5mm) or 1" (25.4 mm) thick, 1" radius opposite 2" radius, with 5/64" diameter side drilled hole (3/4" deep flat bottom hole in 1" thick version). Aluminum 7075-T6. Includes form fitted case. | 1 | |
| V2-CS | MINI ANGLE BEAM BLOCK CS V2 BLOCK.½" (12.5mm) or 1" (25.4 mm) thick, 1" radius opposite 2" radius, with 5/64" diameter side drilled hole (3/4" deep flat bottom hole in 1" thick version).1018 Carbon Steel with form fitted case | 1 | |
| V2-SS | MINI ANGLE BEAM BLOCK CS V2 BLOCK.½" (12.5mm) or 1" (25.4 mm) thick, 1" radius opposite 2" radius, with 5/64" diameter side drilled hole (3/4" deep flat bottom hole in 1" thick version). ..304 Stainless Steel with case | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
