| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 9388-6 | LOCK RING | 1 | |
| 956A7644P100 | LOCK RING | 1 | |
| AT153F-26 | LOCK RING | 1 | |
| AT235-6 | LOCK RING | 1 | |
| AT406B23 | LOCK RING | 1 | |
| AT406C-18 | LOCK RING | 1 | |
| AT415-30H | LOCK RING | 1 | |
| AT465-9H | LOCK RING | 1 | |
| AT615-13 | LOCK RING | 1 | |
| MS1990E-105P | LOCK RING | 1 | |
| MS1990E-107P | LOCK RING | 1 | |
| PWA 27701 | LOCK RING | 2 | |
| PWA 27704 | LOCK RING | 2 | |
| SDR-91 | LOCK RING | 1 | |
| SP505140 | LOCK RING | 1 | |
| SP67648 | LOCK RING | 1 | |
| SWG-99 | LOCK RING | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) CP11301 | SPRING LOCKING RING (CALIBRATION) | 1 | |
| (CALIB) FDOO03D23654000 | LOCKING STEERING PIN (CALIBRATION) | 1 | |
| 00061-2305-0001 | WRENCH - BEARING LOCKNUT | 1 | |
| 00061-2305-0001PM | WRENCH - BEARING LOCKNUT | 1 | |
| 1-12465A | LOCK ROD SILENCER BEARING | 1 | |
| 100-51961 | Bearing Lock Nut Spanner Tool | 1 | |
| 100268-1 | HYDROLOCK LEGREST, GAS SPRING | 3 | |
| 10237-1 | RING, LOCK-OUT | 15 | |
| 109-3400-46-107 | PULLER 90 GEAR BOX INPUT PINION LOCK RING REMOVER | 1 | |
| 109-3400-75-1 | PULLER, LOCKING RING REMOVAL | 1 | |
| 10C1010G01 | TORQUE ADAPTER, INSTALL AND REMOVE - NO. 3 BEARING LOCK NUT, | 1 | |
| 10C1138 | ADAPTER - MOTORING/LOCKING CORE ENGINE | 1 | |
| 10C1138G01 | MOTORING / LOCKING ADAPTER | 1 | |
| 10C1138G03 | ADAPTER, MOTORING/LOCKING-CORE ENGINE | 1 | |
| 11001 | RIVET BUSTER | GROOVED BARREL WITH LOCK SPRING | S | 12 | |
| 11001A | RIVET BUSTER | GROOVED BARREL WITH LOCK SPRING | SWAN NECK HANDLE | 11 | 1 | |
| 11C3053 | ADAPTER - TORQUE-INSTALL/REMOVE NO 3 BEARING LOCKNUT | 1 | |
| 129-0405-32-143 | RING LOCK | 1 | |
| 129-0405-32-147 | WASHER, LOCK RING | 1 | |
| 13270S18R75 | BALL LOCK PIN D.ACTING ¿18 X 75 STEEL RING HANDLE | 1 | |
| 14-6801-0120 | TIRE BEAD BREAKER -- LOCKING RING | 12 | |
| 14-6867-6000 | PIN, STEERING RIG/LOCKING | 5 | |
| 203 | Reducer PN#ASD1203 for TB3/TB125. Includes balllock pin for securing red | 7 | |
| 1507 | BLOCK / SPRING | 6 | |
| 17010 | 37 FLARING BLOCK FOR 1/8" TUBE | 4 | |
| 120214 | Washer- Regular, Helical Spring Lock | 1 | |
| 120382 | Washer- Regular, Helical Spring Lock | 1 | |
| 129217 | ASSY FOR LOCKING SPRING | 1 | |
| 18C1516 | FIXTURE, TORQUE - NO. 1 BEARING OUTER RACE LOCKNUT | 1 | |
| 1900186 | SPRING-CYL BLOCK,RETAINER & DRIVE SHAFT ASSY TOOL | 1 | |
| 1900550 | CYLINDER BLOCK SPRING COMPRESSOR | 1 | |
| 1900857 | MEASURING BLOCK | 1 | |
| 2000108 | Reducer for TB3/TB125. Includes ball lock pin for securing reducer in towbar. Converts 3-1/4" ID multi-head bar to 3" ID to allow smaller corporate heads to fit larger bar. | 1 | |
| 2001153 | Rx towbar for Lockheed Martin C-130 Series aircraft family. Heavy duty steel towbar features linear & radial shear protection, hydraulic lift kit, road speed rated wheels-hubs and bearing. 15 foot long towbar ships fully assembled except for tube haves | 1 | |
| 2001182 | Specialties low-level twin folding maintenance stand provides safe and easy transport access for aircraft maintenance and rolling stock inspection. Featuring an incredibly versatile folding design, the locking top portion of the stand can be folded up, ac | 1 | |
| 2003138 | towbar for Lockheed Martin C-130 Series aircraft with FLIR. Heavy duty steel towbar features linear & radial shear protection, road speed rated wheels-hubs and bearing. | 1 | |
| 107020566 | SPARE LOCKING SPRING | 1 | |
| 114122694 | Locking Ring | 1 | |
| 19116C4R8F | BALL LOCK PIN 4BALL STEEL 1/4 X 0.8 RING HAN | 2 | |
| 21211B | SPRING LOCK PLUNGER | 1 | |
| 21C1351G001 | #3 BEARING LOCKNUT WRENCH -SPANNER | 1 | |
| 21C1352G001 | #4 BEARING LOCKNUT WRENCH-SPANNER | 1 | |
| 21C1361G001 | #1 BEARING LOCKNUT WRENCH-SPANNER | 1 | |
| 21C1362G002 | #2 BEARING LOCKNUT SPANNER | 1 | |
| 21C7008G01 | NO 3 BEARING LOCKNUT SPANNER WRENCH | 1 | |
| 230210 | SECURING BLOCK | 1 | |
| 23003262 | CRIMPER-LOCKNUT, GAS PRODUCER TURBINE REAR BEARING . CRIMPS THE GAS PRODUCER TURBINE REAR BEARING LOCKNU | 2 | |
| 2370-S158-401 | DOWNLOCKING SPRING LOAD CHECK DEVICE | 1 | |
| 2370-S730-401 | DOWNLOCKING SPRING MOUNTING DEVICE | 1 | |
| 269A9241 | Punch & Block 269A5050-44 Bearing Installation | 1 | |
| 269T1221 | Socket Pitch Bearing Locknut Main Rotor | 1 | |
| 269T9331 | Idler Pulley Bearing Locknut Installation | 1 | |
| 27-01-3679 | LOCK TOOL AIL SPRING TAB (MV7627-5-02) | 1 | |
| 27-1-3679 | LOCK TOOL AIL SPRING TAB | 2 | |
| 27.1-3679 | LOCKTOOL,AILERON SPRINGTAB F50 | 2 | |
| 2916721 | Pin assy-lock，steering by-pass | 1 | |
| 2916721-1 | Pin Assy - Lock Steering Bypass | 6 | |
| 2919052 | SPRING-LOCK | 1 | |
| 2C5192G01 | WRENCH, Nº 2 BEARING LOCKNUT SPANNER | 1 | |
| 2C5242G01 | WRENCH #1 - BEARING LOCK NUT | 1 | |
| 2C5242G02 | WRENCH, NO. 1 BEARING LOCKNUT SPANNER | 1 | |
| 2C6251 | PULLER SPLIT NUT LOCK RING: | 1 | |
| 2C6251G02 | NO. 4 BRG SPLIT NUT LOCK RING PULLER | 1 | |
| 2C625I | PULLER SPLIT NUT LOCK RING: | 1 | |
| 2C81050G01 | WRENCH, NO. 5 BEARING LOCKNUT | 3 | |
| 2C81178G03 | ADAPTER, TORQUE - NO. 3 BEARING LOCK | 1 | |
| 2C81505 | ADAPTER, TORQUE - NO.1 BEARING LOCKNUT | 1 | |
| 2C81505G01 | ADAPTER, TORQUE - NO.1 BEARING LOCKNUT | 1 | |
| 2C91125 | #5 BEARING LOCKNUT WRENCH | 1 | |
| 2C91125G01 | ADAPTER, NO. 5 BEARING LOCKNUT SPANNER | 1 | |
| 2C91323G01 | ADAPTER - #1 BEARING - LOCKNUT | 1 | |
| 2MIT65B04011-41 | LOCKOUT PIN-NLG STEERING BYPASS | 15 | |
| 2MIT65B98000 | SECURING CLIP SET - BLOCKER DOOR DEACTIVATED TURBINE THRUST REVERSER | 1 | |
| 300.2000 | KUNZ MULTI LOCK SPRING PRESS | 1 | |
| 3000.2000 (KUNZ) | MULTI LOCK SPRING PRESS | 1 | |
| 306552AT1 | Lock Ring Installation Tool | 1 | |
| 312016 | PPG Semco 312016 20cc Luer Plastic Lock Syring Barrel | 1 | |
| 3201-04-17 | BALL LOCK PIN D.ACTING ¯1/4X1.7" RING HANDLE | 8 | |
| 3201-0406 | BALL LOCK DOUBLE-ACTING 1/4 X 0.6" STAINLESS RING-HANDLE | 4 | |
| 3201-0410 | BALL LOCK PIN 1/4 X 1.00 RING HANDLE DOUBLE ACTING STAINLESS | 1 | |
| 3201-0417 | BALL LOCK PIN D.ACTING ¯1/4X1.7" RING HANDLE | 8 | |
| 330A93-2024-20 | BLOCK,BEARING FIXTURE | 1 | |
| 35-23310-0703 | RAMP HOOK LOCK SPRING | 1 | |
| 35-91037-0003 | LOCKING STEERING PIN | 1 | |
| 350A90-02/PHP | THRUST BEARING BOLT LOCK | 1 | |
| 350A93-3712-00 | BLOCK, BEARING ADJUST. ON ROT.START | 2 | |
| 350A93-3712-00/PHP | BLOCK BEARING ADJUST ON ROT. START | 1 | |
| 350A93371200 | BLOCK BEARING ADJUST ON ROT. START | 2 | |
| 360A93-3223-20 | RING LOCK WRENCH | 1 | |
| 365A93-3104-21 | FITTING BLOCK,SHAFT BEARING | 1 | |
| 365A93310421 | FITTING BLOCK,SHAFT BEARING | 1 | |
| 365A93311200 | BEARING ASSEMBLY BLOCK ON ROTATING S | 1 | |
| 3G3205G00231 | PIN, NOSE GEAR CENTERING LOCK | 1 | |
| 3G6205G26551 | WRENCH, M/R LOWER SCISSOR BEARING LOCKNUT REM/INSTL (GJ-63-00) | 1 | |
| 3MIT65B00162 | LOCK ASSEMBLY - NOSE GEAR STEERING | 5 | |
| 3SF5214-09-10M | Pin, Steering Valve Lock | 1 | |
| 4115-0089W01 | LOCK RING TOOL | 1 | |
| 4115-0801W03 | LOCKING RING HANDLE, MLG | 1 | |
| 4116C4R17 | BALL LOCK PIN D.ACTING ¯1/4X1.7" RING HANDLE | 1 | |
| 43040 | RING, LOCKOUT, CIRCUIT BREAKER, RED | 1 | |
| 440-40994 | SPRING ASSEMBLY PUMP BLOCK RELIEF VALVE | 1 | |
| 460003180-80 | KEEP RING - MLG LOCKSTAY ACTR A320NEO | 6 | |
| 50623 | HAMMERING BLOCK | 1 | |
| 460005832 | LOCK SPRING | 31 | |
| 460005970 | TOOL - DOWNLOCK SPRINGBOX INST. (MV7632-5-15) | 1 | |
| 460007002 | EXPANDER - LOCK SPRINGS SUPSD BY 460007169/460007170 | 1 | |
| 5035-0201W050 | LOCK RING INSTALLATION TOOL | 1 | |
| 5035-0201W50 | LOCK RING INSTALLATION TOOL | 1 | |
| 516-944-11 | GAGE BLOCK SET;|GAUGE BLOCKS STEEL,MEASURING,GRADE 2; | 1 | |
| 5391A33 | LOCKING CHANGE-TIP RETAINING RING PLIERS SET | 1 | |
| 548712 | GUIDE AND SPRING, BRUSH LOCK | 1 | |
| 6-14622A | LOCKER WIRING HARNESS | 1 | |
| 602KIT1225 | LOCK ROD AND SPRING FR EPIQ RC | 1 | |
| 6260A6600-01 | EXTRACTOR, LOCKING RING | 1 | |
| 6263A2600-01 | MLG LOCKING RING REMOVAL TOOL | 1 | |
| 6263A3000-01 | DOWNLOCK SPRING EXTENDER | 1 | |
| 627A170-A | 1#&2# MULTI-FUNCTION SPOILER LOCKING RING | 1 | |
| 627A180-A | 3# MULTI-FUNCTION SPOILER LOCKING RING | 1 | |
| 627A190-A | GROUND SPOILER LOCKING RING | 1 | |
| 6798046 | WRENCH-BEARING LOCKNUT, GAS PRODUCER | 2 | |
| 6798927 | CRIMPER-NO. 2 BEARING NUT LOCKING | 2 | |
| 738L579G04 | RING-LOCKED SELF-LOCKING INSERT | 1 | |
| 738L579G07 | RING-LOCKED SELF-LOCKING INSERT | 1 | |
| 738L579G08 | RING-LOCKED SELF-LOCKING INSERT | 1 | |
| 738L579G10 | KIT, INSERT AND LOCKRING | 1 | |
| 76908 | 76908 SLEEVE BLOCK CENTERING | 11 | |
| 67630231 | LOCK ASSEMBLY - NOSE GEAR STEERING | 1 | |
| 801455-372 | LOCKING RING TOOL | 1 | |
| 8074 | ROSAN LOCK RING INSTALLER | 2 | |
| 80T2341 | SPECIAL BEARING UPPER BLOCKER DOOR | 1 | |
| 856A1000 | WRENCH INSTALLATION AND REMOVAL NO. 3 BEARING LOCKING NUT | 2 | |
| 856A1000 G09 | WRENCH, INSTALLATION AND REMOVAL - NO. 3 BEARING LOCKING NUT (WRENCH) | 6 | |
| 856A1000G01 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G02 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G03 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 3 | |
| 856A1000G04 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G05 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G06 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G07 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G08 | WRENCH, INSTALLATION AND REMOVAL - NO. 3 BEARING LOCKING NUT (WRENCH) | 4 | |
| 856A1000G09 | Wrench, Installation and Removal - No. 3 Bearing Locking Nut (wrench) | 6 | |
| 856A1519G04 | Heater, No. 3 Bearing Locking Nut (heater) | 3 | |
| 856A1865G01 | FIXTUE. TORQUE - NO. 3 BEARING LOCK NUT (TORQUE FIXTURE) | 3 | |
| 856A1865G04 | Fixture, Torque - No. 3 Bearing Lock Nut (torque fixture) | 5 | |
| 856A1894G01 | HEATER, NO. 3 BEARING LOCKING NUT (HEATER) | 5 | |
| 856A2609G01 | QUAD RING BLOCK JACKING-FUEL PUMP | 26 | |
| 856A2798 | LOCKING FIXTURE AND SOCKET - AGB 31/71-TOOTH GEARSHAFT BALL BEARING NUT LOCKING (FIXTURE AND SOCKET) | 1 | |
| 856A2798G01 | LOCKING FIXTURE AND SOCKET- AGB 31/71-TOOTH GEARSHAFT BALL BEARING NUT | 5 | |
| 856A3555 | SOCKET, STALOCK NUT - HORIZONTAL AND INPUT BEVEL GEARSHAFT BALL BEARINGS (SOCKET) | 1 | |
| 856A3555 P01 | Socket Stalock Nut ‐ Bevel Gearshaft Ball Bearing | 4 | |
| 856A3555P01 | Socket Stalock Nut - Bevel Gearshaft Ball Bearing | 4 | |
| 856A4065G01 | FIXTURE, THREAD REPAIR -NO. 3 BEARING LOCKNUT | 1 | |
| 8574814 | Pliers – Lock Ring | 1 | |
| 8813959000 | LOCKING TOOL AND CENTERING WRENCH ASSEMBLY | 1 | |
| 90-TFBX | Bowers 23° BXR Ring Groove Dia/Width Sett Block | 1 | |
| 92384A036 | BALL LOCK PIN 1/4 X 1"1/2 RING HANDLE STAINLESS | 1 | |
| 92384A037 | BALL LOCK PIN 1/4 X 1"3/4 RING HANDLE STAINLESS | 1 | |
| 9332-011 | 85 TON JACK WITH LOCK RINGS | 1 | |
| 94505A564 | Locking Push-Pull Quick-Release Pin Ring Handle 38 Diameter 2 Usable Length | 1 | |
| 95165A035 | DOUBLE BALL RING GRIP SELF-LOCKING | 1 | |
| 956A1506 | COVER - SEAL - NUT LOCKING NUMBER 3 BEARINGS | 1 | |
| 956A1511 | FIXTURE - TORQUE - LOCKNUT - 3B BEARING | 1 | |
| 956A6337G01 | FIXTURE, ASSEMBLY - LOCKING RING | 1 | |
| 956A6484 | DUMMY - LOCKING NUT - LPT BEARING -ROLLER 5 | 1 | |
| 956A6541 | FIXTURE - TORQUING - LOCKING NUT BEARING 5 | 1 | |
| 956A6637 | FIXTURE - ASSEMBLY - LOCKING RING | 1 | |
| 956A6637G01 | LOCKING RING ASSY FIXTURE | 2 | |
| 956A6637G02 | FIXTURE, ASSEMBLY - LOCKING RING | 3 | |
| 956A8125 | FIXTURE - LOCK - IGV RING | 1 | |
| 956A8609 | KIT FIXTURE - ASSEMBLY LOCKING RING | 1 | |
| 97A27902026000 | RING-LOCKING,RUDDER AND AILERON TRIM CONTROLS WHEELS | 3 | |
| 98430A140 | SELF-LOCKING RETAINING RING 5/8 | 1 | |
| 98A27902026000 | RUDDER & AILERON LOCK RING TOOL | 1 | |
| 98A52307622000 | GAGE - MEASURING, BULK CARGO DOOR LOCKING MECHANISM | 19 | |
| 98D07203002202 | RING-LOCKING | 1 | |
| 98D27604004000 | COLLAR SAFETY, SPOILER (spoiler safety lock ring) | 8 | |
| 98D52307524705 | STAINLESS STEEL BALL LOCK QUICK RELEASE PIN WITH RING HANDLE | 1 | |
| 98F27207505000 | PIN - LOCKING, CENTERING DEVICE | 1 | |
| 98F27207518000 | PIN - LOCKING, CENTERING DEVICE | 14 | |
| 98L27003000416 | BLOC SUPPORT ANNEAU RING BLOCK SUPPORT | 1 | |
| 98V27004022000 | Aileron outer actuator lock ring | 4 | |
| 98V27004025000 | Aileron inner actuator lock ring | 3 | |
| 98V27103002001 | 0 degree elevator actuator locking ring | 5 | |
| 98V27103003001 | Elevator actuator extends locking ring | 5 | |
| 98V55109011000 | BEARING BLOCK – HTP* | 1 | |
| 99 | PITCHLOCK RETAINING RING WRENCH SHORT BAR | 1 | |
| 9938 | SET OF PLIERS FOR LOCKS RINGS | 2 | |
| 99A57004001294 | LOCKING RING | 1 | |
| 99A57004001295 | LOCKING RING | 1 | |
| 9C1443 | FIXTURE, RESTRAINING-LPT INNER AND OUTER LOCK RINGS | 1 | |
| 9C2264G02 | LOCKING WRENCH - HPCR RING TUBE SPTR NUT | 1 | |
| A07003-2 | LOCK PIN NLG STEERING | 1 | |
| A09003-1 | VALVE LOCK PIN, NLG STEERING | 13 | |
| A09003-2 | LOCK PIN ASSY STEERING (TOWING NLG) | 33 | |
| A11091 | LOCKING SPRING INSTALLATION TOOL | 1 | |
| A32018-1 | SPRING EXTENDER - LOCK LINK, NOSE LANDING GEAR | 1 | |
| A32045-111 | WRENCHES - SPANNER - NLG STEERING TRUNNION LOCKNUT | 8 | |
| A32099-1 | DOWNLOCK SPRING EXTENDER, MLG/NLG | 1 | |
| A330-92464-0001 | LOCKING TOOL, SPRING ACTUATORS | 1 | |
| A35001-10 | OXY SYSTEM FIRING PIN LOCK SET | 21 | |
| A38003-33 | SPRING-REMOVERBLOCKAGE(VAC. TOILET) | 2 | |
| A38003-34 | SPRING-REMOVERBLOCKAGE(VAC. TOILET) | 1 | |
| A5211021120000 | SPRING-LOCK UNIT | 1 | |
| A78010-1 | CHECK FIXTURE - SPRING INTERLOCK BELLCRANK, JT9D | 1 | |
| AC116L | AC116L;MAP-Series OPM adaptor 2.5 mm ferrule with LC centering non-locking | 1 | |
| AGE18801 | LOCK PISTON SPRING FIXTURE | 1 | |
| AK995 | AUTO LOCK MEASURING TAPE (7.5 M) | 1 | |
| AT1100-28MP2 | LOCK SPRING 2 PK | 1 | |
| AT153F-46 | LOCK RING SET | 1 | |
| ATB1067 | INSERTION TOOL 20 GAGE FEMALE ROUND CANNON PLUG (WITHOUT SPRING LOCKS). | 3 | |
| ATI520CJP-2 | LOCK RING FOR POWER UNIT | 1 | |
| ATI520DPG3 | LOCKRING | 1 | |
| AW-D23156000 | STREERING LOCK PIN-AIRBUS | 1 | |
| B27065-12 | USED TO LOCK CIRCUIT BREAKERS IN THE OPEN POSITION DURING MAINTENANCE PROCEDURES. | 11 | |
| B32002 | EXTENDER - DOWNLOCK SPRING MLG & NLG | 1 | |
| B32002 REV A | EXTENDER - DOWNLOCK SPRING MLG & NLG | 1 | |
| B32002-1 | EXTENDER - DOWNLOCK SPRING, MAIN LANDING GEAR AND NOSE LANDING GEAR (MLG AND NLG) | 12 | |
| B32019-1 | THIS STRAP ASSEMBLY IS USED TO LOCK THE NLG SHOCK STRUT INTO A DEPRESSURIZED POSITION DURING GROUNDMAINTENANCE OPERATIONS. | 11 | |
| B32033-1 | WRENCH EQUIPMENT - ALTERNATE LOCKUP RELEASE, ACTUATOR LOCK RING, MAIN LANDING GEAR (MLG) | 2 | |
| B32034-1 | WRENCH EQUIPMENT - ALTERNATE UPLOCK RELEASE ACTUATOR, LOCK RING, NOSE LANDING GEAR (NLG) | 1 | |
| B32038 | EXTENDER -0 UPLOCK SPRING, MLG | 1 | |
| B32038-1 | EXTENDER - UPLOCK SPRING, MAIN LANDING GEAR (MLG) | 3 | |
| B32038-1-M | EXTENDER-UPLOCK SPRING | 1 | |
| B32038-2 | EXTENDER MLG UPLOCK SPRING | 1 | |
| B32051 | SPRING EXTENDER -0 LOCK RELEASE ACTUATOR, NG & | 1 | |
| B32051-1 | SPRING EXTENDER - LOCK RELEASE ACTUATOR, MAIN LANDING GEAR (MLG) AND NOSE LANDING GEAR (NLG) DOOR | 5 | |
| B78017-1 | Installation Equipment - Bearing - Lead Screw, Thrust Reverser Non-Locking Actuator Assembly | 9 | |
| BAB890411 | BALL LOCK PIN 1/4 X 1.1" RING HANDLE DOUBLE ACTING | 1 | |
| BAB890522 | BALL LOCK PIN 5/16 X 2.20 RING HANDLE DOUBLE ACTING | 1 | |
| BG14706-D | NLG STEERING LOCK | 1 | |
| BL46613 | REST BLOCK BEARING INSTL SWAGING | 1 | |
| BLC3R10 | BALL LOCK PIN 3/16 X 1" RING HANDLE | 1 | |
| BLC3RA10S | BALL LOCK PIN 3/16 X 1.0" RING HANDLE | 1 | |
| BLS3RS10S | BALL LOCK PIN 3/16 X1.0" RING HANDLE | 1 | |
| BLS4R07N | BALL LOCK PIN 1/4 X 0.7" RING HANDLE | 1 | |
| BLS4R10N | BALL LOCK PIN 1/4 X1.0" LG STEEL NON DRIVE OUT WITH HANDLE RING | 2 | |
| BLS4RA08SF | BALL LOCK PIN 4BALL STEEL 1/4 X 0.8" RING HAN | 2 | |
| BT1436 | LOCKRING REMOVAL CUTTER | 2 | |
| BT308 | ROSAN LOCKRING REMOVAL TOOL | 3 | |
| BT309 | ROSAN LOCKRING REMOVAL TOOL | 3 | |
| C-25-1 1/2 | C25-1 1/2 MB NEW BALL BEARING PILLOW BLOCK | 1 | |
| C01637453-001GT00-02 | MLG BEAM BEARING ASSY. SWING LINK LOCKING RING SOCKET | 1 | |
| C01637453-001GT00-04 | SOCKET, OB, DOGHOUSE LOCKING RING | 1 | |
| C12004-6 | SPRING LOCK | 17 | |
| C12051T-70-2344 | SPRING GUIDE BLOCK | 1 | |
| C27038-6 | LOCK OUT LE CRUISE DEPRESSURING | 22 | |
| C27046-13 | LOCK SET - INBOARD GROUND SPOILER ACTUATOR USED TO HOLD THE INBOARD GROUND SPOILERS IN THE DEPLOYED POSITION DURING GROUND MAINTENANCE. | 26 | |
| C28005-5 | LOCKING RING | 1 | |
| C32014 | SPRING EXTENDER DOWNLOCK NOSE AND MAIN LANDING GEAR | 1 | |
| C32014-1 | Spring Extender - Downlock, Nose and Main Landing Gear | 19 | |
| C32014-2 | SPRING EXTENDER DOWNLOCK NOSE & MLG | 5 | |
| C32014-20 | SPRING EXTENDER - DOWNLOCK, NOSE AND MAIN LANDING GEAR | 2 | |
| C32014-29 | SPRING EXTENDER - DOWNLOCK, NOSE AND MAIN LANDING GEAR | 5 | |
| C32014-29 | SPRING EXTENDER – DOWNLOCK,NOSE AND MAIN LANDING GEAR | 5 | |
| C32067-1 | SPRING EXTENDER - INBOARD DOWNLOCK, MAIN LANDING GEAR | 1 | |
| C32068-1 | SPRING EXTENDER - DOWNLOCK, MAIN LANDING GEAR | 1 | |
| CA18132T11 | LIVELOCK RING TOOL | 1 | |
| CAMLOK SWAGE TOOL | SWAGING CAMLOCK O RING TOOL | 1 | |
| CAT5917-6-A | MLG SIDEBRACE DOWNLOCK SPRING PULLER KIT | 1 | |
| CAT5944-11 | THE PULLER OF THE LOCK SPRINGS OF THE RELEASED POSITION OF THE STRUT | 1 | |
| CG9520004-0001 | SPRING LOCKING TOOLS | 1 | |
| CHA1878-0705 | Lockring Deforming Tool | 1 | |
| CHA1878-0705PM | LOCKRING DEFORMING TOOL | 1 | |
| CL-12-BLPR-2.40 | BALL LOCK PIN ¿3/4 X 2.4ÕÕLG RING HANDLE | 1 | |
| CL-3-BPDR-0.60-S | BALL LOCK PIN D.ACT. RING HANDLE 3/16X0.6 STAINLESS STEEL | 1 | |
| CL-4-BLPR-0.75 | BALL LOCK PIN ¿1/4 X 3/4ÕÕ LG RING HANDLE | 1 | |
| CL-4-BLPR-1.00 | BALL LOCK PIN 1/4 X 1.00Ó RING HANDLE | 1 | |
| CL-4-BLPR-200 | RING-HANDLE BALL LOCK PIN | 1 | |
| CL-4-BPDR-1.00 | DOUBLE ACTING BALL LOCK PIN 1/4 X 1.00 RING HANDLE | 1 | |
| CL-4-BPDR-1.50-S | BALL LOCK PIN D. ACTING RING H. ¿1/4 X 1.5" ST.STEEL | 2 | |
| CL-4-BPDR-2.10 | BALL LOCK PIN 1/4 X 2.10 STEEL RING HANDLE | 1 | |
| CL-6-BLPR-.75 | BALL LOCK PIN 3/8 X 3/4 RING HANDLE STEEL | 1 | |
| CLM-10-BLHR-25-S-C | BALL LOCK PIN 100MM X 25MM RING HANDLE STAINLESS WITH CABLE ASSY | 1 | |
| CLM-10-BLPR-30-S | BALL LOCK PIN RING HANDLE ¿M10X30MMLG. ST. STEEL | 1 | |
| CLM-12-BLHR-40-S-C | BALL LOCK PIN 12MM X 40MM RING HANDLE STAINLESS WITH CABLE ASSY | 1 | |
| CLM-6-BLPR-15-S | BALL LOCK PIN 6 mm X 15mm - RING GRIP | 1 | |
| CLM-8-BLHR-10-S-C | BALL LOCK PIN 8MM X 10MM RING HANDLE WITH CABLE ASSY | 1 | |
| CP-11301 | PIN-SPRING-LOCKING | 2 | |
| CP11301 | SPRING LOCKING RING | 2 | |
| CP25727 | SPRING LOCKING PIN | 1 | |
| CPWA-30467 | Tool – Locking, # 4 Bearing Cup Washer | 1 | |
| CPWA-30820 | Locking tool, no. 1 bearing cup washer | 1 | |
| CT780034-501 | Assy Wrench, Blocker Door Bearing | 1 | |
| D23156000 | LOCK PIN, STEERING.. | 34 | |
| D46493 | BLOCK - CENTERING | 6 | |
| DCM1589-1 | TOOL,DOWNLOCK SPRING INSTL/RMVL-NLG/MLG | 1 | |
| DCM1589-1 | TOOL,DOWNLOCK SPRING INSTL/RMVL-NLG/MLG | 1 | |
| DMC1700D | DMC1700D Wiring System Service Kit for Lockheed Martin F-35 Lightning II (Joint Strike Fighter) | 1 | |
| DMC216 | DMC216 Lockheed F-16 Wiring System Maintenance Kit | 4 | |
| DMC2271 | DMC2271 Wiring System Service Kit for F-16 Block 70 & All Prior Variants | 2 | |
| DSK20999N02-001 | NLG AUXILIARY DOWNLOCK SPRING PULLER | 3 | |
| DZZ7801-1 | BEARING LOCK RING | 1 | |
| EEFI50010 | 5/8IN SPRING LOCK MALE. | 1 | |
| EEFI50011 | 5/8IN SPRING LOCK FEMALE. | 1 | |
| Ex-71585 | Jig-drill, turbine front bearing cage lock pin hol | 1 | |
| F1120007 | Block Ring | 1 | |
| F47116 | TOOL FOR SECURING THE LOCK PLATES OF THE JET LOCK-NUL | 1 | |
| F70281 | LOC.BLOCK SET -0 FAN REV COWL RING, JT3D TO HOLD | 1 | |
| F71288 | JIG ASSY-NOSE GEAR LOCK ACTUATOR USED DURING | 1 | |
| F72729 | LOCK -0 ELEVATOR USED DURING REMOVAL AND INSTL. | 1 | |
| F72735 | NOSE GEAR STEERING LOCKOUT PIN | 25 | |
| F72735-1 | nose wheel steering, lockout pin | 5 | |
| F72735-13 | Pin Assy - Nose Wheel Steering Lockout | 24 | |
| F72735-13_1 | Lock Pin Assy-Nose Wheel Steering | 1 | |
| F72735-13_2 | Lock Pin Assy-Nose Wheel Steering | 1 | |
| F72735-13_3 | Lock Pin Assy-Nose Wheel Steering | 1 | |
| F72735-13_4 | Lock Pin Assy-Nose Wheel Steering | 1 | |
| F80118-11 | BEARING RETENTION/REMOVAL LOCK BOLT (ACCESSORY TO F80118-1 KIT) | 1 | |
| F80169-1 | DOWN-LOCK SPRING REM / INS TOOL | 15 | |
| F80173-17 | BLOCK-`O`RING | 1 | |
| FDOO02D23654000 | Locking Steering Pin | 1 | |
| FDOO03D23654000 | Locking Steering Pin | 1 | |
| FLR640 | FUEL TANK LOCK RING KIT | 1 | |
| FLR640-1 | LOCK RING LEG, 2 TAB | 1 | |
| FLR640-2 | LOCK RING LEG, 1 TAB | 1 | |
| FLR640-3 | LOCK RING LEG | 1 | |
| G27001-1 | USED AS A LOCK BETWEEN THE ACTUATOR AND THE SPOILER HINGE FITTING TO HOLD SPOILER OPEN AGAINST SYSTEM PRESSURE DURING MAINTENANCERIGGING. | 10 | |
| G27002-1 | USED AS A LOCK BETWEEN THE ACTUATOR AND THE SPOILER HINGE FITTING TO HOLD SPOILER OPEN AGAINST SYSTEM PRESSURE DURING MAINTENANCERIGGING. | 10 | |
| G32064-1 | EQUIPMENT REMOVAL/INSTALLATION - UPLOCK SPRING, WING LANDING GEAR AND BODY LANDING GEAR | 2 | |
| G32072-1 | LOCKOUT PIN - NOSE LANDING GEAR, STEERING BYPASS | 6 | |
| G32072-2 | LOCKOUT PIN - NOSE LANDING GEAR, STEERING BYPASS | 3 | |
| G32078-1 | LOCK MOORING NLG | 6 | |
| GA63799 | END # END-ASSY, DOWNLOCK SPRING NLG | 1 | |
| GC55979 | UP-LOCK LATCH WEAR MEASURING TOOL Q400 | 5 | |
| GS10898 | LOCK RING EXPANDER | 1 | |
| GS19963-1 | INSTALLER, LOCK RING | 1 | |
| GSB2010001 | RING - LOCKOUT CIRCUIT BREAKER (RED) | 2 | |
| GSB3231001 | UP-LOCK LATCH WEAR MEASURING TOOL Q400 | 1 | |
| GSE55758 | A380 WEDGE-LOCK SPRING EXPANSION TOOL BODY LANDING GEAR | 1 | |
| GSE55759 REVA | AFT AXLE STEERING SAFETY PIN & Block | 1 | |
| GSE55787 | COMPRESSION TOOL LOCKING SPRING WING LANDING GEAR | 1 | |
| GSE55934 | Downlock spring extension tool | 1 | |
| GSE55952 | SPRING EXTENSION TOOL DOWNLOCK,LOCK STAY ASSY WING LANDING GEAR | 1 | |
| GSE57818 | SPRING EXPANDER-LOCK STAY | 1 | |
| H005112 | LOCKPIN SPRING | 1 | |
| H21971 | NLG LOCK SPRING TENSION TOOL | 1 | |
| H21973 | MLG Lock Spring Tens Tool | 4 | |
| H46835 | NLG LOCK SPRING TENSION | 12 | |
| HCL103 | SPRING HOSE CLAMP LOCK SET | 1 | |
| HRR683-6 | SPRING LOCK COUPLER TOOL | 1 | |
| HS2-23200 | NLG DOWNLOCK SPRING REMOVAL / INSTALLATION TOOL | 2 | |
| HU21572 | ADAPTER - DISTRIBUTOR BLOCK TO INT. WHEEL CASE & TURBINE BEARINGS | 1 | |
| HU36988 | SOCKET - LOCK RING, LP TURBINE | 1 | |
| IAE 3P16434 | FLARING FIXTURE (SELF-LOCKING CLINCH NUT IS 0.250-28 THREAD AND IS FLARED TO 30 DEGREES CONICAL ANGLE) | 1 | |
| IAE1J12556 | BLOCK, MEASURING | 1 | |
| IAE1P16567 | FLARING FIXTURE (SELF-LOCKING CLINCH NUT IS 0.250-28 THREAD AND IS FLARED TO 30 DEGREES CONICAL ANGLE) | 3 | |
| IAE1R18087 | BLOCK, MEASURING | 1 | |
| IM182R | 3/4DR RBR LOCK RING | 1 | |
| IM243R | 3/4DR RBR LOCK RING | 1 | |
| IM445R | 1 1/2DR RBR LOCK RING | 1 | |
| IM483R | 1DR RBR LOCK RING | 1 | |
| J10013-1 | Steering Lock | 1 | |
| J10013-13 | STEERING LOCK | 2 | |
| J201P01 | NUT SELF LOCKING FOR FAN FRAME INSTL-BEARING | 1 | |
| J32009-47 | CENTERING CAM LOCK ASSEMBLY | 1 | |
| J32009-6 | CENTERING CAM LOCK | 1 | |
| J32014-90 | CENTERING BLOCK | 1 | |
| J32037-106 | SPRING UPLOCK REMOVAL EQUIPMENT | 19 | |
| J32037-91 | SPRING BLOCK | 1 | |
| J32045-1 | Overcentering Tool - Uplock Hook MLG | 1 | |
| J32090-17 | REMOVAL/INSTALLATION EQUIPMENT, MLG DOWNLOCK SPRING | 6 | |
| J32090-53 | REMOVAL/INSTALLATION EQUIPMENT, MLG DOWNLOCK SPRING | 5 | |
| J32090-70 | Removal/Installation Equipment, MLG Uplock And Downlock Spring | 7 | |
| J47893 | MLG UPLOCK LOAD MEASURING TOOL | 8 | |
| JAH1260SR | 60 TONNE ALUMINIUM JACK, FAILSAFE LOCK RING | 1 | |
| JHWPL-1515 | LOCK RING PLIERS 8 | 1 | |
| K28703 | DISPATCH RING KIT - LOCK OPEN (***DISPATCH***) | 2 | |
| K32003-1 | SPRING REMOVAL/INSTALLATION EQUIPMENT - MAIN LANDING GEAR UPLOCK AND MAIN LANDING GEAR DOOR UPLOCK | 6 | |
| K530013-1 | TORSION SPRING LOCK- PRESSURE RELIEF DOOR | 1 | |
| K53013-1 | TORSION SPRING LOCK - PRESSURE RELIEF DOOR | 1 | |
| K78006-1 | T/R ISOLATION VALVE LOCK MEASURING TOOL ELECTRIC MOTOR ACTUATOR | 11 | |
| KM57 KIT | ROSAN FITTING REPLACEMENT FOR INSTALLING O-RINGS AND REMOVING LOCKRINGS | 1 | |
| KNIPEX NO. 1099W | CRIMPING PLIER FOR LOCKING RING | 1 | |
| KUNZ 3000.2000 | MULTI LOCK SPRING PRESS | 1 | |
| LDTBL12 | SPRING LOCK DISC 1/2 BLUE | 1 | |
| LDTG12 | SPRING LOCK DISC 1/2 GREEN | 1 | |
| LDTLB58 | SPRING LOCK DISC 5/8 LONG BLK | 1 | |
| LDTR38 | SPRING LOCK DISC 3/8 RED | 1 | |
| LDTSB58 | SPRING LOCK DISC 5/8 SHRT BLK | 1 | |
| LDTW34 | SPRING LOCK DISC 3/4 WHITE | 1 | |
| LDTY38 | SPRING LOCK DISC 3/8 YELLOW | 1 | |
| LOCKRINGNUT714A | LOCK RING NUT FOR JACK 714A | 1 | |
| LTCT5970-01 | Staking Tool Assembly, Ring Gear Lock Cup | 1 | |
| LTCT7534-01 | Unlocking Tool Assembly, Ring Gear Lock Cup | 1 | |
| M006-01H038-101 | BLOCKING RING | 1 | |
| M21929 | LOCK SPRINGS REM/INSTALL TENSIONER | 26 | |
| M46212 | FALSE JAWS - LOCKING SPRING NLG A320NEO | 7 | |
| M46213 | PIN WRENCH - LOCKING SPRING NLG A320NEO | 7 | |
| M46215 | SPECIAL WRENCH - LOCKING SPRING NLG A320NEO | 6 | |
| M46228 | ADAPTER - LOCKING SPRING NLG A320NEO | 5 | |
| M46347 | TOOL TO HOLD THE LOCK ASSEMBLY DURING INSTALLATION OF THE TARGETS | 2 | |
| M46921 | SEATING BLOCK COMP PISTON SPRING | 1 | |
| MF08LPDE | LOCKRING REMOVAL TOOL FOR ITEM (2-70) | 1 | |
| MF2011PD | LOCK RING LIFTING TOOL | 1 | |
| MF2011PDE | LOCK RING LIFTING TOOL | 1 | |
| MF9808DEK | DRIVE TOOL - LOCKRING LIFT TYPE, ADAPTER | 1 | |
| MF9820DEK | LOCK RING DRIVE TOOL | 1 | |
| MIT65B01562 | LOCK ASSEMBLY - NOSE GEAR STEERING | 2 | |
| MS-T26 | C-LOCK SNAP-RING INST TOOL | 2 | |
| MS1990E-105P | LOCKRING | 1 | |
| MS1990E-107P | LOCKRING | 1 | |
| MS35338-139 | WASHER LOCK-SPRING 1/4 CRS 300 SERIES | 1 | |
| MSM111-20 | REMOVAL TOOL, LOCK RING | 1 | |
| NAS1333C2C21D | NLG STEERING LOCKOUT PIN | 4 | |
| NAS1334A6C1.75D | BALL LOCK PIN 1/4 X 1"3/4 RING HANDLE STAINLESS | 1 | |
| NOV-22 | LOCK-RING INSTALLATION DRIFT | 1 | |
| NRK-3S/400SS | CUSTOM NAVY EDDY CURRENT BLOCK. Material: 400 Stainless Steel. 3 Plate assembly measuring 4" x 7" x .875", Contains 20 fastener holes with diameters ranging from .156" – .750"., 71 EDM notches in various locations (notch depth & lengths vary), Widths for | 1 | |
| NRK-3S/HX | CUSTOM NAVY EDDY CURRENT BLOCK. Material: Hastelloy X, 3 Plate assembly measuring 4" x 7" x .875", Contains 20 fastener holes with diameters ranging from .156" – .750"., 71 EDM notches in various locations (notch depth & lengths vary), Widths for all notc | 1 | |
| NRK-3ST | CUSTOM NAVY EDDY CURRENT BLOCK. Material: 4340 Cres Steel. 3 Plate assembly measuring 4" x 7" x .875", Contains 20 fastener holes with diameters ranging from .156" – .750"., 71 EDM notches in various locations (notch depth & lengths vary), Widths for all | 1 | |
| NRK-3T | CUSTOM NAVY EDDY CURRENT BLOCK. Material: 6AL-4V Titanium 3 Plate assembly measuring 4" x 7" x .875", Contains 20 fastener holes with diameters ranging from .156" – .750"., 71 EDM notches in various locations (notch depth & lengths vary), Widths for all n | 1 | |
| OTC | OTC 1922 - WHEEL BEARING LOCKNUT SOCKET | 1 | |
| OTC 1921 | 2 1/2 INCH 6PT TRUCK WHEEL BEARING LOCKNUT SOCKET | 1 | |
| OTC 1922 2-5/8 | OTC 1922 Wheel Bearing Locknut Socket - 6 Point, 2-5/8" Opening Size | 1 | |
| OTC1922 2-5/8 | Wheel Bearing Locknut Socket - 6 Point, 2-5/8" Opening Size | 1 | |
| OTC6599 | FUEL TANK LOCK RING WRENCH | 1 | |
| OTCJ45722 | LOCK RING TOOL | 1 | |
| PE7007 | CIRCUIT BREAKER LOCKOUT RING AND TAG | 1 | |
| PS4-070 | LOCK RING, STANDARD LARGE | 1 | |
| PSDF4600-45 | LOCK RING KEY | 1 | |
| PSO4-068 | SM LOCK RING FINE 3IN | 1 | |
| PSO4-071 | LG LOCK RING FINE 5IN AND 6IN | 1 | |
| PWC38231 | LOCKING RING,ADAPTER,JACK SCREWS | 3 | |
| PWC48541 | CURING BLOCK | 2 | |
| R1106D | LOCKRING DRIVER | 1 | |
| R1106W | INSERT LOCKRING DRIVER | 4 | |
| R1713D | INSERT LOCKRING DRIVER | 1 | |
| R205D | LOCK RING DRIVE TOOL | 2 | |
| R205D3 | LOCKRING DRIVE TOOL | 1 | |
| R206D | ROSAN LOCKRING DRIVE TOOL | 2 | |
| R209D | LOCKRING DRIVER | 1 | |
| R212D | INSERT LOCKRING DRIVER | 1 | |
| R21820000 | TOOL EXT MLG LOCK SPRING | 6 | |
| R3606D | LOCKRING DRIVE TOOL | 1 | |
| R3607D | LOCKRING DRIVE TOOL | 1 | |
| R3710D | INSERT LOCKRING DRIVER | 1 | |
| R3715D | INSERT LOCKRING DRIVER | 1 | |
| R3715W | INSERT LOCKRING DRIVER | 1 | |
| RA207D | LOCKRING DRIVE TOOL | 1 | |
| RB23003262 | CRIMPER-LOCKNUT, GAS PRODUCER TURBINE REAR BEARING . CRIMPS THE GAS PRODUCER TURBINE REAR BEARING LOCKNU | 2 | |
| RB6798046 | Wrench-Bearing Locknut, Gas Producer | 2 | |
| RBE350A94-3440-07 | Sight Pattern, Bearing Block | 1 | |
| RBW6510A00436W142D-3T | Wrench, Shurlock, Bearing Support Housing | 1 | |
| RD3606D | LOCKRING DRIVE TOOL | 1 | |
| RF04LPDE | LOCK RING PULLER | 2 | |
| RF06LPDE | LOCK RING PULLER | 2 | |
| RF08LPDE | LOCK RING PULLER | 2 | |
| RF08LPDE | LOCKRING- REMOVAL | 2 | |
| RF10LPDE | REMOVAL TOOL, LOCKRING LIFT TYPE | 2 | |
| RF10LPDE | LOCKRING- REMOVAL | 2 | |
| RF12LPDE | LOCK RING REMOVAL TOOL | 2 | |
| RF14LPDE | REMOVAL TOOL LOCKRING LIFT TYPE | 1 | |
| RF16LPDE | LOCK RING PULLER | 1 | |
| RF20 LPDE | LOCK-RING REMOVAL TOOL | 1 | |
| RF20LPDE | LOCK RING PULLER | 1 | |
| RF9804DEK | FITTING LOCK RING INSTALLATION | 1 | |
| RF9808DEK | DRIVE TOOL - LOCKRING LIFT TYPE, ADAPTER | 1 | |
| RF9808DEK???? | LOCKRING DRIVE TOOL | 1 | |
| RF9808DEK | LOCKRING DRIVE TOOL | 1 | |
| RF9810DEK | LOCK RING DRIVE TOOL | 1 | |
| RF9810DEK?????? | LOCKRING DRIVE TOOL | 1 | |
| RF9810DEK | LOCKRING DRIVE TOOL | 1 | |
| RF9812DEK | DRIVE TOOL – LOCKRING | 1 | |
| RF9816DA | ROSAN LOCKRING DRIVE TOOL - OUTLET | 1 | |
| RF9816DEK | ROSAN LOCKRING DRIVE TOOL OUTLET ADAPTOR | 1 | |
| RFKA9906DW | DRIVE TOOL – LOCKRING | 2 | |
| RLRR24SB7 | LOCKRING | 1 | |
| RLRR33SB9 | LOCKRING | 1 | |
| RO25-070 | LOCK RING STD ORBIT BLACK | 1 | |
| RO25-071 | LOCK RING FINE ORBIT RED | 1 | |
| RO25-072 | LOCK RING COARSE ORBIT GREY | 1 | |
| RRT051205 | LOADING TOOL - RETAIN RIM COVERPLATE LOCKING RING | 1 | |
| RSE1136 | BLOCK DOOR MEASURING TOOL | 4 | |
| RSW5/16-SZ | REGULAR SPRING LOCK WASHER 5/16 STEEL ZINC | 1 | |
| S-4933959-501 | LOCKOUT RING | 19 | |
| S-4933959-521 | LOCK - CIRCUIT BREAKER, WITH TAG "REMOVE BEFORE FLIGHT" (MINIMUM ORDER OF $150 REQUIRED). REPLACES B27065-12 LOCK. (PACO PLASTICS & ENGINEERING INC) | 13 | |
| S-4933959-531 | LOCK - CIRCUIT BREAKER, WITH TAG "INOPERATIVE - DO NOT OPERATE" (MINIMUM ORDER OF $150 REQUIRED). REPLACES B27065-12 C (PACO PLASTICS & ENGINEERING INC) | 11 | |
| S101D12 | ROSAN LOCKRING DRIVE TOOL, 1/4 ID | 2 | |
| S111D12 | LOCKRING DRIVER | 2 | |
| S121D12 | DRIVE TOOL, LOCK RING | 2 | |
| S121D32 | LOCK RING DRIVE TOOL FOR STUD | 1 | |
| S4933959 | RED "REMOVE BEFORE FLIGHT" TAG CIRCUIT BREAKER LOCKOUT RING | 1 | |
| S4933959-501 | CIRCUIT BREAKER LOCKOUT RING | 19 | |
| S4933959-503 | PACO PLASTICS S4933959-503 FAA-PMA YELLOW CIRCUIT BREAKER LOCKOUT RING WITHOUT TAG | 3 | |
| S4933959-507 | PACO PLASTICS S4933959-507 FAA-PMA BLACK CIRCUIT BREAKER LOCKOUT RING WITHOUT TAG | 3 | |
| S4933959-509 | CIRCUIT BREAKER LOCKOUT RING WITH HOLE | 1 | |
| S4933959-519 | CIRCUIT BREAKER LOCKOUT RING | 1 | |
| S4933959-521 | CIRCUIT BREAKER LOCKOUT RING | 13 | |
| S4933959-529 | PACO PLASTICS S4933959-529 FAA-PMA NATURAL/CLEAR CIRCUIT BREAKER LOCKOUT RING WITH "INOPERATIVE" TAG | 1 | |
| S4933959-531 | CIRCUIT BREAKER LOCKOUT RING | 11 | |
| S4933959-531? | CIRCUIT BREAKER LOCKOUT RING | 11 | |
| S91D10 | DRIVE TOOL, LOCK RING | 3 | |
| SA30168 | Lockring removal tool | 1 | |
| SA30168PM | LOCKRING REMOVAL TOOL | 1 | |
| SE78-3010 | COMPRESSOR -0 TR LOCK ACTUATOR RING TO COMPRESS | 1 | |
| SF5902-3D | LOCK RING DRIVE TOOL | 1 | |
| SG 350A90-02 | THRUST BEARING BOLT LOCK | 1 | |
| SG350A90-02 | THRUST BEARING BOLT LOCK | 1 | |
| SM101-18 | LOCK RING REMOVAL TOOL TYPE OF | 2 | |
| SM111-20 | REMOVAL TOOL, LOCK RING | 2 | |
| SM111D12 | DRIVE TOOL, LOCK RING | 1 | |
| SM121-22 | REMOVAL TOOL, LOCK RING | 2 | |
| SM121D12 | DRIVE TOOL, LOCK RING | 1 | |
| SM91-16 | REMOVAL TOOL, LOCK RING | 2 | |
| SP53300B | SCREW LOCKING AND O RING ASSY | 1 | |
| SP66186 | BACK JAWS SCREW LOCK RING | 1 | |
| SPSZE4039 | ADAPTER LOCK RING | 1 | |
| SR19R | REMOVAL TOOL (LOCKING RING) | 3 | |
| SR25R | LOCKRING REMOVAL TOOL | 3 | |
| ST933 | SWAGING TOOL - HOUSING BEARING RING LOCK | 1 | |
| ST933-100 | SWAGING TOOL - SHAFT BEARING RING LOCK | 1 | |
| ST933-100-12 | Swaging tool shaft bearing ring lock | 1 | |
| ST933-100-625 | Swaging tool-shaft-bearing ring lock | 1 | |
| ST933-2250-1250 | Standard tool swagong tool housing bearing ring lock | 1 | |
| ST95469 | Bearing Locknut Removal Tool | 1 | |
| STD-1307 | TOOL – OVER-CENTERING, MLG UPLOCK HOOK (0.500” DIA X 24” METAL ROD, WITH PROTECTIVE RUBBER TUBING) | 1 | |
| T28004947-LRA-1 | Lock Ring Installation Tool | 1 | |
| T28004947-LRI-1 | LOCK RING INSTALLATION TOOL | 1 | |
| T33264 | ANTI SKID LOCKRING ADAPTOR | 10 | |
| T415105 | CYLINDER BLOCK SPRING COMPRESSOR | 1 | |
| T418206 | VALVE BLOCK BEARING DRIVER | 1 | |
| T87412 | LOCK RING INSTALLATION TOOL | 1 | |
| TB1PT35A | FLARING BLOCK | 1 | |
| TEK-5006/5007 SYRINGE | TEK-5006/5007 SYRINGE Assembly, w/ Leur Lock Fitting | 1 | |
| TF55707-1006 | Red and Yellow Collars and Ball Lock Pins (support shock strut during tests) | 1 | |
| TL4989 | Gauge Block Brush Gear Slip Ring | 1 | |
| TQFR100C20 | SPRING MAIN LOCK | 1 | |
| U21829 | TOOL NLG DRAG STAY LOCKSPRING R/I | 11 | |
| U21829-1 | TOOL NLG DRAG STAY LOCKSPRING R/I | 1 | |
| U21966 | NLG Lock Spring Tens. Tool | 8 | |
| U27966 | LOCK SPRING TENSION TOOL | 1 | |
| W-1893 | MEASURING BLOCK | 1 | |
| Y30700501 | LOCK OUT RING | 1 | |
| 80T2341 | SPECIAL BEARING UPPER BLOCKER DOOR | 1 | |
| В78017-1 | INSTALLATION EQPT - BEARING-LEAD SCREW, T/R NONLOCKING ACTUATOR ASSY | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
