| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 0000072070 | LOCK PLATE | 1 | |
| 0100500150 | LOCK PLATE | 1 | |
| 0205500210 | LOCK PLATE | 1 | |
| 47145-1 | LOCK PLATE | 1 | |
| J20002-24 | LOCK PLATE | 1 | |
| J52009-21 | LOCK PLATE | 1 | |
| J52009-21-WLDMT | LOCK PLATE | 1 | |
| K47001-92 | LOCK PLATE | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 114-1094 | LOCKPLATE INSTALLATION TOOL | 1 | |
| 114-1102 | Tool for Installation of Lock Plates on Bolts | 1 | |
| 114-243 | LOCKPLATE INSTALLATION TOOL | 1 | |
| 114-549 | TOOL FOR INSTALLATION OF LOCK PLATES ON BOLTS | 1 | |
| 139W00-542-00 | BENDING TOOL (FOR LOCKING PLATE OF ANTI-RATTLE NUT) | 1 | |
| 149T6951-2 | INTERLOCK PLATES | 1 | |
| 16-016X-12 | DPSA LOCKING PLATE | 1 | |
| 1X56 122 276 | PULLER FÜR LOCKING PLATE | 1 | |
| 650 | TOOL TO REMOVE LOCK PLATES | 5 | |
| 68518 | LOCKPLATE | 1 | |
| 0000072090 | LOCKING PLATE | 1 | |
| 74008 | LOCKPLATE | 5 | |
| 289922 | FIXTURE, LOCKPLATE REMOVAL | 1 | |
| 406064 | PLATE LOCK | 1 | |
| 539781 | PLATE-LOCK, GRBX PIN | 1 | |
| 2000489 | LOCKING PLATE | 1 | |
| 0202000240 | LOCKING PLATE | 1 | |
| 0292720810 | RAISING PLATE OF FILTER SUPPORT BLOCK | 1 | |
| 0298290100 | PLATE,LOCK | 1 | |
| 0319401300 | PLATE, LOCKING | 1 | |
| 2100071-101 | DPSA LOCKING PLATE | 1 | |
| 2137-0237-1 | LOCK PLATE, INPUT SHAFT | 1 | |
| 27-1-3897A | PLATE ADJUSTEMENT BRUSH BLOCK AND PICK-UP PROBE 27.1.3897.01 | 1 | |
| 2F10368 | #5 Pressure Block Off Plate - A1 only | 1 | |
| 2TE65B40004 | BLOCK-OUT PLATE | 4 | |
| 31-54149-1 | LOCK PLATE HORIZ. STAB. GEAR BOX | 1 | |
| 3120044-01 | PLATE, LOCK, TRANSFER TUBE | 1 | |
| 3170024-1 | BLOCK PLATES, ENGINE BLEED AIR | 1 | |
| 332A36-3053-20 | LOCK, PLATE | 1 | |
| 350A91-0005-21 | PLATE, LOCK | 1 | |
| 350A91000521 | PLATE, LOCK | 1 | |
| 350A94-3700-00 | Swashplate Locking Tool Kit AS350 B3 | 1 | |
| 355A94-3745-01 | Swashplate Locking Fixture AS355 F2 | 1 | |
| 355A94-3745-01/PHP | SWASHPLATE LOCKING ASSEMBLY | 1 | |
| 369D29822-3 | TAIL ROTOR SWASH PLATE HOLDING BLOCK | 1 | |
| 3T900-0579 | FIXTURE HEIGHTLOCK PLATE SETTING | 1 | |
| 55-4505016-00 | PLATE LOCKING | 1 | |
| 63-10-00 W5 | LOCKER PLATE | 1 | |
| 697037611 | LOCK PLATE (PROP BLADE) | 1 | |
| 697070642 | LOCK PLATE (PROP BLADE) | 1 | |
| 6790615453 | LOCKING PLATE | 1 | |
| 6F6230G05231 | TOOL KIT, SWASHPLATE ASSY WINDSHILD LOCKIN PIN | 1 | |
| 72PY06407SLWB07 | CASTER-SWIVEL-6X2 POLY ON IRON-6.25"X7.5" TOP PLATE-SWIVEL LOCK | 1 | |
| 7811TC15092-1 | Lock Guide Plate | 1 | |
| 856A3728 | CORE ENGINE SEALING PLATE AND LOCKING ADAPTER | 1 | |
| 856A3728 G02 | CORE ENGINE SEALING PLATE AND LOCKER ADAPTER | 14 | |
| 856A3728G01 | Core Engine Sealing Plate & Lock Adaptor | 12 | |
| 856A3728G02 | CORE ENGINE SEALING PLATE & LOCKING ADAPTER | 14 | |
| 906 | Lock Plate Installation Tool | 4 | |
| 94-2748-00 | SWASH PLATE BLOCKING | 1 | |
| 98A78003000000 | LOCKING PLATE - PWA ENGINE | 1 | |
| 98L52108459212 | BASE PLATE FOR INTERLOCK | 1 | |
| 98V28004006000 | LOCKING PLATE, TWIN MOTOR ACTUATOR | 1 | |
| 99A53003001104 | HOLE PLATE CALIBRATION BLOCK | 4 | |
| 99A53003001107 | HOLE PLATE CALIBRATION BLOCK | 4 | |
| 99V57103002000 | Airbus Calibration Block A350-A-571100-AFAPE3-04J2E-A-001-01 Sheet 01 Page 1-2. Material: Ti-6Al-4V ANNEALED PLATE. Includes Test Report and Certificate of Conformance. | 1 | |
| A27022-9 | BLOCK PLATE | 1 | |
| A27111-4 | Lock Plates | 1 | |
| ACS87021 | T/R LOCKOUT PLATE | 2 | |
| ACS87021-301 | PLATE, THRUST REV. LOCKOUT | 4 | |
| AFNDT-3348/4340 | 7 STEP METRIC WEDGE: Step Sizes: 1mm, 3mm, 5mm, 10mm, 15mm, 20mm, 25mm +/- .05mm . Pad Size: 20mm x 20mm. Supplied With Holding Block. Material- 4340 Steel (Nickle Plated for Corrosion Protection). Includes Test Report and Certificate of Conformance. Manu | 1 | |
| B78001-19 | LOCKOUT PLATE | 1 | |
| CG300-5 | LOCK PLATE FOR 20T CG300/305 | 1 | |
| CJ250-5 | LOCK PLATE 2/3 JAW CJ250 | 1 | |
| CJ273-5 | LOCK PLATE 2/3 JAW CJ270 | 1 | |
| CTRS761-7 | FOOTPLATE LOCKING KNOB | 1 | |
| D61139 | LOCK PLATE, REF.AMM FIG.ITEM:35, AIPC REF.:32211603A-120 | 1 | |
| D62724 | LOCK PLATES | 1 | |
| D97B00-003 | LOCKING PLATE | 17 | |
| D97E00-606 | PLATE-ACTUATOR LOCK | 1 | |
| E2J45702 | SEGMENTAL LOCKPLATE DRIFT | 1 | |
| E2J60661 | FILING FIXTURE FOR LOCK PLATES 4-6 | 1 | |
| E53‐006 | CALIBRATION BLOCK DIMENSIONS 95 X 90 MM, WITH 03 ALUMINUM PLATES, EDM NOTCH 10.6 MM | 1 | |
| F47116 | TOOL FOR SECURING THE LOCK PLATES OF THE JET LOCK-NUL | 1 | |
| F80049-17 | ASSEMBLY - LOCK, FLIGHT CONTROLS (USED WITH VALVES P/N 10-60710-2 AND 10-60710-6) 5.0 INCH X 1.1 INCH X 0.25 INCH ALUMINUM PLATE | 6 | |
| F80049-46 | ASSEMBLY - LOCK, FLIGHT CONTROLS (USED WITH VALVES P/N 10-60710-2 AND 10-60710-6) 5.0 INCH X 1.1 INCH X 0.25 INCH ALUMINUM PLATE | 17 | |
| F80049-66 | ASSEMBLY - LOCK, FLIGHT CONTROLS (USED WITH VALVES P/N 10-60710-2 AND 10-60710-6) 5.0 INCH X 1.1 INCH X 0.25 INCH ALUMINUM PLATE | 14 | |
| FAT-35-344 | ZERO SETTING LOCK PLATE | 1 | |
| FAT-35-345 | ZERO SETTING LOCK PLATE | 1 | |
| FAT-35-346 | ZERO SETTING LOCK PLATE | 1 | |
| FAT-35-347 | ZERO SETTING LOCK PLATE | 1 | |
| FAT35-344 | PLATE, LOCK, ZERO SETTING | 1 | |
| FAT35-345 | PLATE, LOCK, ZERO SETTING | 1 | |
| FAT35-346 | PLATE, LOCK, ZERO SETTING | 1 | |
| FAT35-347 | PLATE, LOCK, ZERO SETTING | 1 | |
| FE146-903 | ZERO SETTING LOCK PLATE | 1 | |
| FE147-902 | ZERO SETTING LOCK PLATE | 1 | |
| FE148-902 | ZERO SETTING LOCK PLATE | 1 | |
| FE190-901 | ZERO SETTING LOCK PLATE | 1 | |
| FE197-901 | LOCKING PLATE | 6 | |
| FE300901000 | PLATE, ZERO POSITION LOCKING | 1 | |
| G-30 | Cherry Aerospace G-30 CherryLock A Code Nut-Plate Hand Riveter | 3 | |
| G28019-21 | BLOCKER PLATE | 1 | |
| G28019-21-F | BLOCKER PLATE | 1 | |
| GSB1000025 | LOCK PLATE - TYPE III EMERGENCY DOOR | 1 | |
| GSB100002S | LOCK PLATE-TYPE III EMERGENCY DOOR | 1 | |
| HA-355A94-3745-0113 | SWASHPLATE LOCKING FIXTURE AS355 F2 | 1 | |
| HU19845 | LOCK PLATE PUNCH | 1 | |
| HU27629/1 | LOCKING PUNCH, LOCKPLATE TO NUT | 1 | |
| HU28786 | DUMMY LOCK PLATES STAGE 1 (7 EACH) | 1 | |
| HU37581-2 | PLATE - ANCHOR, LP TURBINE, LOCKING NUT | 1 | |
| HU38009-1 | LOCKPLATE | 1 | |
| HU45346 | LOCKPLATE INSTALLATION OR REMOVAL TOOL | 1 | |
| HU45355 | SLAVE LOCKPLATE | 1 | |
| HU51492-1 | LOCKPLATE | 1 | |
| HU5682 | LOCK PLATE PUNCH | 1 | |
| HU568212 | LOCKPLATE PUNCH | 1 | |
| IAE1R18076 | SLAVE LOCK PLATES | 1 | |
| IAE1R18641 | PLATE, LOCKING | 1 | |
| J32010-30 | LOCKPLATE | 1 | |
| J32010-94 | LOCKPLATE ASSY | 1 | |
| J32077-31 | V-BLOCK PLATE | 1 | |
| J52009-21 | Lock Plate Assy | 1 | |
| K32038-5 | SMALL BRAKE LOCK PLATE ASSEMBLY | 1 | |
| K32038-6 | LARGE BRAKE LOCK PLATE ASSEMBLY | 1 | |
| LJ18888 | PLATE LOCK REVERSE E | 1 | |
| LJ23989 | PLATE LOCK REVERSE E | 1 | |
| LTCT 962 | LOCKING PLATE | 2 | |
| LTCT962 | PLATE, LOCKING, POWER | 2 | |
| LW-12272 | LOCKPLATE | 1 | |
| LW1/2 | LOCK WASHER ¿1/2 ZINC PLATED | 1 | |
| MIT65B93000 | BLOCKER PLATE - PS4 BLEED PORT | 1 | |
| MT146-2 | BLOCK - LOWER SWASHPLATE RIGGING | 1 | |
| MT146-3 | BLOCKS-LOWER SWASH PLATE RIGGING | 1 | |
| MT146-4 | BLOCK - LOWER SWASHPLATE RIGGING | 1 | |
| MT146-4/PHP | BLOCK - LOWER SWASHPLATE RIGGING | 1 | |
| NAS1791C3-1 | LOCKING NUTPLATE SELF | 1 | |
| NRK-3S/400SS | CUSTOM NAVY EDDY CURRENT BLOCK. Material: 400 Stainless Steel. 3 Plate assembly measuring 4" x 7" x .875", Contains 20 fastener holes with diameters ranging from .156" – .750"., 71 EDM notches in various locations (notch depth & lengths vary), Widths for | 1 | |
| NRK-3S/HX | CUSTOM NAVY EDDY CURRENT BLOCK. Material: Hastelloy X, 3 Plate assembly measuring 4" x 7" x .875", Contains 20 fastener holes with diameters ranging from .156" – .750"., 71 EDM notches in various locations (notch depth & lengths vary), Widths for all notc | 1 | |
| NRK-3ST | CUSTOM NAVY EDDY CURRENT BLOCK. Material: 4340 Cres Steel. 3 Plate assembly measuring 4" x 7" x .875", Contains 20 fastener holes with diameters ranging from .156" – .750"., 71 EDM notches in various locations (notch depth & lengths vary), Widths for all | 1 | |
| NRK-3T | CUSTOM NAVY EDDY CURRENT BLOCK. Material: 6AL-4V Titanium 3 Plate assembly measuring 4" x 7" x .875", Contains 20 fastener holes with diameters ranging from .156" – .750"., 71 EDM notches in various locations (notch depth & lengths vary), Widths for all n | 1 | |
| PELM471 | PLATE: LOCKING, | 2 | |
| PWA27889 | ADAPTER,PLATE - FRT COMP DISK TABLOCK_[PWA27889] | 2 | |
| PWA27893 | ADAPTER,PLATE - LPC 3RD STG BLD TABLOCK_[PWA27893] | 2 | |
| PWA27895 | ADAPTER,PLATE - LPC 4TH BLADE TABLOCK_[PWA27895] | 2 | |
| PWA27917 | ADAPTER, PLATE - LPC BLADE TABLOCK_[PWA27917] | 2 | |
| PWA80821 | PLATE BLOCK OFF OIL SYSTEM LEAK TEST | 1 | |
| PWC64018 | Puller (CT locking plate) | 3 | |
| QDS135305801 | TOP PLATE & BLOCK ASSY,LASER | 1 | |
| RBA9822-3 | T/R SWASHPLATE HOLDING BLOCK (BLOCK ONLY) | 4 | |
| RBD29822-3 | TAIL ROTOR SWASH PLATE HOLDING BLOCK | 2 | |
| RBD29822-3 & -5 | Tail Rotor Swash Plate Holding Block (-3), Wr (-5) Set 2 & 4 Bl "D,E&F" Model | 1 | |
| RKKMC18LK | LOCK PLATE/HASP KIT | 1 | |
| RRT026744 | LOCK PLATE - WIDTH GAUGE | 1 | |
| RRT051205 | LOADING TOOL - RETAIN RIM COVERPLATE LOCKING RING | 1 | |
| RRT063161 | CUTTING TOOL - LOCK PLATES | 1 | |
| RSW3/4-SZ | LOCK WASHER 3/4 STEEL ZN PLATED | 1 | |
| RSW3/8-SZ | LOCK WASHER ZINC PLATED | 1 | |
| SEB322400-1 | TR LOCKOUT RELAY PLATES. | 1 | |
| SL90-350-7500 | RUDDER Z-STRUT LOCK PLATE REMOVER | 21 | |
| T535791 | LOCKING PLATE | 1 | |
| T720456 | Valve Locking Plate | 12 | |
| T720456-005 | Dowel - Locking Plate | 1 | |
| TE21T-31001-27 | BLOCK-OFF PLATE | 1 | |
| TSF21T-51001-5 | BLOCKING PLATES AND FITTING | 1 | |
| TSF5T-52001-14 | AIR EXHAUST BLOCK OFF PLATE | 1 | |
| TSF5T-52001-26 | BLOCK OFF PLATE (WAS NOTED AS A -16, SCARS ASSOCIATES NOMENCLATURE WITH -26) | 1 | |
| TSF5T-52001-7 | BLOCK OFF PLATE, WAVE GUIDE | 1 | |
| V2 | PH TOOL V2 (A4) CALIBRATION BLOCK, 12.5MM, 1018 STEEL, NICKEL PLATED | 2 | |
| XD97E00-606 | PLATE - LOCKING | 1 | |
| ZPLATE20FRD2 | RETRO FORD LOCKER PLATE 40" V2 | 1 | |
| ZPLATEGUY9 | GUY MARTIN L/ LOCKER PLATE 17 | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
