| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| B27020-31 | LOCK -0 | 15 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 00480-508-000 | LOCKING BOLT FOR HYDRO TOWBAR AS7845-005 | 1 | |
| 00480-636-000 | LOCKING BOLT FOR HYDRO TOWBAR AS7845-005 | 1 | |
| 04Y0008-001 | HOOK LOCK KEY-04Y0008-001 | 9 | |
| 11171 | WEDGE LOCK 1/8 (0-0.5) | 2 | |
| 11172 | WEDGE LOCK 5/32 (0-0.5) | 2 | |
| 11173 | WEDGE LOCK 3/16 (0-0.5) | 1 | |
| 11174 | WEDGE LOCK 1/4 (0-0.5) | 1 | |
| 1217-737LJR | BLOCK (PART OF P/NO. RVS-SDMS-001) | 1 | |
| 126-000-101 | TOWBAR,AIRCRAFT,NLG 126-000-101 LOCKHEED | 1 | |
| 190-70250-409 | MLG LOCKING STAY, ASSY MS17986C616 2301-0101-001 | 2 | |
| 190-70650-401 | NLG LOCKING STAY, ASSY MS17986C616 2301-0101-001 | 2 | |
| 2-164-501 | AIRBUS EDDY CURRENT CALIBRATION BLOCK 4340 STEEL, 51-10-00-250-801 and 51-63-991-001 PAGE 601 FIGURE 601. Includes Test Report and Certificate of Conformance. | 4 | |
| 2-835-01-9301 | AIRBUS CALIBRATION BLOCK, STAINLESS STEEL, 0.2mm, 0.5mm, 1mm EDM SLOTS. PART 6: 51-63-01 page 601 figure 601 | 2 | |
| 2-835-01-9330 | AIRBUS CALIBRATION BLOCK, 6AL-4v TITANIUM, 0.2mm, 0.5mm, 1mm EDM SLOTS. PART 6: 51-63-01 page 601 figure 601 | 2 | |
| 2-835-01-9331 | AIRBUS CALIBRATION BLOCK. MATERIAL: 304 Stainless Steel, 0.2mm, 0.5mm, 1mm EDM SLOTS. PART 6: 51-63-01 page 601 figure 601 Includes Test Report and Certificate of Conformance. | 1 | |
| 21158148-003 | 21158148-003;USB External Clock Adapter Cable MSAM-V2 | 1 | |
| 27-01-3679 | LOCK TOOL AIL SPRING TAB (MV7627-5-02) | 1 | |
| 27-95031-001 | Calibration Block, Fairchild SA226-32-065:PG8 FIG1 | 2 | |
| 29A032 | CALIBRATION BLOCK ( GE ID:078-540-003) | 3 | |
| 3201-0410 | BALL LOCK PIN 1/4 X 1.00 RING HANDLE DOUBLE ACTING STAINLESS 3201-0410 | 1 | |
| 332A93-3692-00 | TOOLING,SEAL MAINTENANCE (ICO 13-30-30-02) BLOCK | 1 | |
| 332A95-5290-00 | TOOLING ASSEMBLY,IGB (ICO 13-30-50-01) ASSEMBLY BLOCK | 1 | |
| 332A95-7501-001 | TOOLING,SEAL MAINTENANCE (ICO 13-30-30-02) HAFTING LOCK W | 1 | |
| 3G1005G00732 | TOOL, T/R BLADES FLAPPING BLOCK (HD-03-00) | 1 | |
| 3G1005G01732 | TOOL, T/R BLADES FLAPPING BLOCK (HD-03-00) | 1 | |
| 3G3205G00231 | PIN, NOSE L/G CENTER LOCK DISENGAGE (GF-43-00) | 1 | |
| 3G3205G00631 | PIN, L/G HANDLE LOCKING (GF-79-00) | 1 | |
| 3G6205G26551 | WRENCH, M/R LOWER SCISSOR BEARING LOCKNUT REM/INSTL (GJ-63-00) | 1 | |
| 57A4248 | TEST BLOCK,ULTRASON NSN:6635-00-022-0367 | 1 | |
| 5916719-505 | SHOCK ABSORVER BLOCK TOOL (D32-039) | 6 | |
| 5936854-501 | BLOCK TOOL (M32-039) | 3 | |
| 718-1520-006 | CARD, PCMCIA OPS SOFTWARE CMU BLOCK 0.82 P/N 718-1520-006 | 2 | |
| 718-1520-020 | CARD, PCMCIA OPS SOFTWARE CMU BLOCK 1.29 P/N 718-1520-020 | 2 | |
| 718-1523-002 | CARD, PCMCIA HGI DATABASE CMU BLOCK 0.82 P/N 718-1523-002 | 2 | |
| 718-1524-002 | CARD, PCMCIA AMI DATABASE CMU BLOCK 0.82 P/N 718-1524-002 | 2 | |
| 76502908-009 | M-TADS CONTINUITY TEST SET; NSN: 5995-00-177-4674; MAKE: LOCKHEED MARTIN – MISSILES & FIRE CONTROL (MFC), CAGE 04939 (M-TADS OEM). | 1 | |
| 856A1068G02 | GAUGE -0 LOCKING ROTOR ASSY | 11 | |
| 856AI068 | GAUGE -0 LOCKING ROTOR ASSY | 1 | |
| 98F27808255001 | BLOCK BLOCK -0 SLAT GAPPING | 7 | |
| 98F32104027000 | SETTING SETTING TOOL -0 UPLOCK | 7 | |
| 98F32303000000 | POSITION POSITIONING TOOL -0 MLG UPLOCK | 8 | |
| 98S55305011-000 | 98S55305011-000(REFERENCE BLOCK ) | 2 | |
| 99-3700 | HUCK® 99-3700 TOOL PART, OFFSET (-05) 5/32 INCH NOSE ASSEMBLY LOCKBOLT LGP, 99LGP-05-ORAD | 2 | |
| 99A53307319000 | AIRBUS A318/A319/A320/A321 REFERENCE BLOCK 51-10-31-PB4. FIGURE 51-10-31-991-004-A SHEET 01. Includes Test Report and Certificate of Conformance. | 2 | |
| 99A57104331000 | AIRBUS CALIBRATION BLOCK A318/A319/A320/A321: PART 4 57-00-00-991-003-A SHEET 01, PAGE 10. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance(COC) | 1 | |
| 99A57104354000 | Guide Block A330 PT4 57-26-08 PG 405-407 FG 3 | 2 | |
| 99A57104355000 | Guide Block A330 PT4 57-26-08 PG 405-407 FG 3 | 3 | |
| 99A57204403001 | AIRBUS CALIBRATION BLOCK A300-600 PART 4 57-21-96 PAGE 404&405 and A318/A319/A320/A321: PART 4 57-20-64-991-006-A SHEET 1-2. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 5 | |
| 99D51407291001 | AIRBUS CARBON LAMINATE THICKNESS REFERENCE STANDARD SET A318-A321 51-10-06-PB4 Multidirectional Fabric Material, BLOCKS 01-06 includes waterproof case. Nominal Thicknesses of 1mm, 3mm, 5mm, 9mm, 15mm, 19mm. Includes Test Report and Certificate of Con... | 7 | |
| 99D52809004000 | AIRBUS REFERENCE STANDARD, 52-81-06, PAGE6 CALIBRATION BLOCK | 7 | |
| 99D54403000004 | AIRBUS STANDARD, A320 PT4 54-51-02-PB4:PG12 FIG54-51-02-991-004-A SHEET01 REFERENCE BLOCK | 7 | |
| 99D54503004000 | AIRBUS CALIBRATION BLOCK A318/A319/A320/A321: PART 4 54-52-17-991-003-A SHEET 01, PAGE7. MATERIAL: 15-5PH STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D54503006000 | AIRBUS CALIBRATION BLOCK : PART 4 54-53-08-991-007-A SHEET 01. MATERIAL: 15-5PH STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D54503007000 | AIRBUS CALIBRATION BLOCK : PART 4 54-53-09-991-003-A SHEET 01. MATERIAL: 15-5PH STEEL. Includes Test Report and Certificate of Conformance. | 2 | |
| 99D55109001000 | AIRBUS A318/A319/A320/A321 CARBON STANDARD PT 4 51-10-06 PAGE 7. MULTIDIRECTIONAL TAPE MATERIAL BLOCK SET OF 4 includes waterproof case. NOMINAL THICKNESS (1mm, 3mm, 5mm, 7mm). Includes Test Report and Certificate of Conformance. | 7 | |
| 99D55109001000/1MM | AIRBUS A318/A319/A320/A321 CARBON STANDARD PT 4 51-10-06 PAGE 7. MULTIDIRECTIONAL TAPE MATERIAL BLOCK NOMINAL THICKNESS (1mm). Includes Test Report and Certificate of Conformance. | 1 | |
| 99D57004000000 | Airbus Calibration Standard Block Set. A340-200/-300 51-63-03 Pg. 2-3, A300, A300-600, A310, A318/A319/A320/A321, A330, A340, A380 51-34-03, Figure 1 Sheett 1 Pg.1-2. Material: AMS-QQ-A-250 2024-T351 Aluminum. Includes Test Report and Certificate of C... | 4 | |
| 99D57004001000 | AIRBUS A318/A319/A320/A321 CALIBRATION BLOCK SET. 51-63-03-PB1 PAGES 4&5, FIGURE 51-63-03-991-002-A SHEET 01 and FIGURE 51-63-03-991-002-A SHEET 03. Includes Test Report and Certificate of Conformance. | 4 | |
| 99D57103025000 | Airbus A318/A319/A320/A321 Reference Block. 2024 Aluminum. PB4 57-11-73 Page 52 Sheet 01, 57-11-73-991-020-A REVISION 114. Includes Test Report and Certificate of Conformance. | 2 | |
| 99D57103026000 | Airbus A318/A319/A320/A321 Reference Block. 2024 Aluminum. PB4 57-11-73 Page 52 Sheet 01, 57-11-73-991-020-A SHEET 02 REVISION 115. Includes Test Report and Certificate of Conformance. | 2 | |
| 99D57103029000 | Airbus A318/A319/A320/A321 Reference Block. 2024 Aluminum. PB4 57-12-02 Page 99 Sheet 01, 57-12-02-991-003-A SHEET 1. | 1 | |
| 99D57103031000 | Airbus A318/A319/A320/A321 Reference Block. 2024 Aluminum. PB4 57-12-04 Page 114 Sheet 01, 57-12-04-991-020-A REVISION 114. Includes Test Report and Certificate of Conformance. | 2 | |
| 99D57204163000 | AIRBUS REFERENCE BLOCK SET A318/A319/A320/A321 Part 4 Figure 57-29-06-991-004-A, Set includes 99D57204163000-A, 99D57204163000-B, 99D57204163000-C. Includes Test Report and Certificate of Conformance. | 3 | |
| 99D57294001000 | Airbus A318/A319/A320/A321 Calibration Block, Figure 57-29-08-991-023-A. Material: Cast Acrylic. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53207316000 | Airbus Standard A330 53-21-36-PB6 PG 16 FIGURE 53-21-36-991-004-A SHEET 01..Calibration Block PN 99F53207316000 | 1 | |
| 99F53207317000 | Airbus Standard A330 53-21-36-PB6 PG 18 FIGURE 53-21-36-991-005-A SHEET 01..Calibration Block PN 99F53207317000 | 1 | |
| 99F53207318000 | Airbus Standard A330 53-21-36-PB6 PG 20 FIGURE 53-21-36-991-006-A SHEET 01..Calibration Block PN 99F53207318000 | 1 | |
| 99F53303001001 | A340-200/-300 AIRBUS REFERENCE BLOCK FIGURE 53-31-39-991-008-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303100000 | AIRBUS A330 REFERENCE BLOCK 53-30-51-991-003-A. MATERIAL: 7075 OR EQUIVQLENT ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303101000 | AIRBUS A330 REFERENCE BLOCK 53-30-52-991-003-A. MATERIAL: 7050 OR EQUIVALENT ALUMINUM. US INSPECTION OF MAIN LONGERON EXTENSION BETWEEN FR53.2 AND FR53.3. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F54403002001 | REFERENCE BLOCK (NON-DESTRUCTIVE TESTING MANUAL REFERENCE: A340-300 NTM 54-51-40-991-003-A) | 5 | |
| 99F54403002002 | REFERENCE BLOCK (NON-DESTRUCTIVE TESTING MANUAL REFERENCE: A340-300 NTM 54-51-40-991-003-A) | 3 | |
| 99F57204133000 | AIRBUS GUIDE BLOCK A340 PT 4 57-26-09. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L51107323000 | Airbus Glare Block Kit, A380 51-10-23-991-004-A | 1 | |
| 99L53303021000 | AIRBUS A380-800 CALIBRATION BLOCK 53-31-33-991-006-A (SHEET 01& 02) PAGES 20-21. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L57203007000 | A380 SEARCH UNIT GUIDE BLOCK; DELRIN(TEFLON), FIGURE:57-11-03-991-026-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L57203008000 | A380 SEARCH UNIT GUIDE BLOCK; DELRIN(TEFLON), FIGURE:57-11-03-991-027-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L57204008000 | AIRBUS A310 CALIBRATION SENSITIVITY BLOCK PART4 57-29-01 PAGE 418 FIGURE 408. Includes Test Report and certificate of Conformance. | 1 | |
| 99L57204068000 | AIRBUS CALIBRATION BLOCK A380-800 57-21-17-991-024-A. MATERIAL: 2024 HDT T351. Includes Test Report and Certificate of Conformance. | 1 | |
| 99LGP-05-ORAD | HUCK® 99-3700 TOOL PART, OFFSET (-05) 5/32 INCH NOSE ASSEMBLY LOCKBOLT LGP, 99LGP-05-ORAD | 2 | |
| 99N51107332000 | AIRBUS REFERENCE STANDARD A380-800 51-10-30-991-003-A FOR CLADDING MEASUREMENT BLOCK SET. Includes Test Report and Certificate of Conformance. | 2 | |
| 99N51109009000 | Airbus Calibration Block A318/A319/A320/A321 51-10-32 Figure 51-10-32-991-003-A Sheet 02 Page 11. Material: 2024-T351 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 99N51109010000 | Airbus Calibration Block A318/A319/A320/A321 51-10-32 Figure 51-10-32-991-003-A Sheet 02 Page 12. Material: 2024-T351 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 99V57103002000 | Airbus Calibration Block A350-A-571100-AFAPE3-04J2E-A-001-01 Sheet 01 Page 1-2. Material: Ti-6Al-4V ANNEALED PLATE. Includes Test Report and Certificate of Conformance. | 1 | |
| A09003-2 | LOCK PIN -0 NOSE GEAR TOWING LEVER | 32 | |
| A20011-103 | BUSHING REM/INSTL KIT -0 L.G. LOCK LINK | 1 | |
| A20011-76 | BUSHING REM/INSTL KIT -0 L.G. LOCK LINK | 2 | |
| A27108-13 | LOCK SET -0 SPOILER ACT. | 17 | |
| A32014-2 | DOWN LOCK -0 MLG/NLG | 15 | |
| A32018-1 | SPRING EXTENDER -0 LOCK LINK, NOSE LANDING GEAR | 1 | |
| A38003-20 | BLOCKAGE REMOVER - VACUUM TOILET 38-30-03 | 18 | |
| A52036-26 | SHEAVE BLOCK -0 WELDMENT | 1 | |
| AC21890000 | FIXTURE -0 TEST BLOCK | 4 | |
| AFNDT-1015 | EDDY CURRENT CALIBRATION BLOCK 2024-T351, WITH .020"Lx.005"W COUNTERSINK SURFACE EDM NOTCH IN EACH HOLE.0.190-0.194, countersink: 100 degrees, 0.3748-0.3819 diameter....0.203-0.207, countersink: 100 degrees, 0.3748-0.3819 diameter....0.2172-0.2182, co... | 1 | |
| AFNDT-1061AL | EDDY CURRENT SURFACE BLOCK 7075-T6. 2 EDM SLOTS ( 0.2mm deep +/-0.05 & 0.12mm wide +/- 0.01),( 0.5mm deep +/- 0.01. Includes Certification Report and Certificate of Conformance. | 1 | |
| AFNDT-1061CS | EDDY CURRENT SURFACE BLOCK, 4130/4140 STEEL. 2 EDM SLOTS ( 0.2mm deep +/-0.05 & 0.12mm wide +/- 0.01),( 0.5mm deep +/- 0.01. Includes Certification Report and Certificate of Conformance. | 1 | |
| AFNDT-1076AL | ALUMINUM CALIBRATION BLOCK 0.020"-0.100" | 1 | |
| AFNDT-1076TI | TITANUM CALIBRATION BLOCK 0.020"-0.100 | 1 | |
| AFNDT-3001 | Embraer 170 reference standard with a .473" diameter hole. Per NDTM PT1 51-00-00-916-802-A , 1.4mm x 1.4mm +/-.05mm long x 0.1mm +/-.05 wide corner EDM notch. Material: 7050-T7 Aluminum. Block size 2.0" x 2.0" x .375". Includes Test Report and Certifica | 1 | |
| AFNDT-3175AL | 8 Step Calibration Block, Material 7075-T6 Aluminum. Steps: 0.5mm, 1mm, 2mm, 3mm, 4mm, 5mm, 7mm, 9mm. (Tolerance: +/-0.02mm)...- Pad Size: 19mm x 19mm (Tolerance: +/- 0.5mm)...- Surface Finish: Ra 0.8 µm (32 µin) max...- Includes Certification Report a... | 1 | |
| AFNDT-3175CS | 8 Step Calibration Block, Material 1018 Steel. Steps: 0.5mm, 1mm, 2mm, 3mm, 4mm, 5mm, 7mm, 9mm. (Tolerance: +/-0.02mm)...- Pad Size: 19mm x 19mm (Tolerance: +/- 0.5mm)...- Surface Finish: Ra 0.8 µm (32 µin) max...- Includes Certification Report and Cer... | 1 | |
| AFNDT-3175TI | 8 Step Calibration Block, Material 6AL-4V Titanium. Steps: 0.5mm, 1mm, 2mm, 3mm, 4mm, 5mm, 7mm, 9mm. (Tolerance: +/-0.02mm)...- Pad Size: 19mm x 19mm (Tolerance: +/- 0.5mm)...- Surface Finish: Ra 0.8 µm (32 µin) max...- Includes Certification Report an... | 1 | |
| AFNDT-3181AL | 8 Step Calibration Block, Material 2024-T3 Aluminum. Step Sizes: 0.5mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 5.0mm, 7.5mm, 10mm. (Tolerance: +/-0.02mm).- Pad Size: 20mm x 20mm (Tolerance: +/- 0.5mm). Includes Certification Report and Certificate of Conformance. | 1 | |
| AFNDT-3187AL | METRIC 10 STEP CALIBRATION BLOCK, 0.6mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm ± .05mm. Pad Size: 20mm X 20mm. Per Airbus Procedure A 51-10-04. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3187TI | METRIC 10 STEP CALIBRATION BLOCK, 0.6mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm ± .05mm. Pad Size: 20mm X 20mm. Material: 6AL-4V Titanium. Per Airbus Procedure A 51-10-04. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3307 | Custom 8 Hole Standard Manufactured to the Specifications of ATR Part Number 98S51605001-218, Part 6 51-60-00 Figure 616 Sheet 1. Material: 2024-T3 Aluminum, Block Size: .390" x 4.4" x 4.4"(10mm x 111.8mm x 111.8mm) . HOLE SIZES: 2.5mm and 3.2mm. Include | 1 | |
| AFNDT-3452AL | 8 Step Calibration Block, Material 7075-T6 Aluminum. Steps: 1mm, 2mm, 4mm, 6mm, 8mm, 10mm, 15mm, 20mm. (Tolerance: +/-0.02mm).- Pad Size: 19mm x 19mm (Tolerance: +/- 0.5mm). Includes Certification Report and Certificate of Conformance. | 1 | |
| AFNDT-3483AL | BOEING 2 STEP CALIBRATION BLOCK, PT 4 51-00-00 PAGE 6 FIGURE 2, MATERIAL: 7075-T6 Aluminum. Step Size: 0.150" and 0.300" ±.0.002. PAD SIZE: 1.0" X 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3483CS | BOEING 2 STEP CALIBRATION BLOCK, PT 4 51-00-00 PAGE 6 FIGURE 2, MATERIAL: LOW CARBON STEEL SUCH AS 1018, 4130 or 4340. Step Size: 0.150" and 0.300" ±.0.002. PAD SIZE: 1.0" X 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3552TI | 5 Step calibration block (0.100", 0.250", 0.500", 0.750" and 1.000"; . Step pad size: .75” x .75”. Material: 6AL-4V Titanium. Includes Test Report and Certificate of Conformance.....Reference: B777 NTM Part4 51-00-10 | 1 | |
| AFNDT-SRS-082A-1 | EDDY CURRENT SURFACE BLOCK 7075-T6 ALUMINUM. 2 EDM SLOTS ( 0.2mm deep +/-0.05mm & 0.12mm wide +/- 0.01mm). EDM NOTCH#1 ( 0.5mm deep +0.06/-0.04 & 0.12 wide +0.01/-0.02 ), and EDM NOTCH #2 ( 1.0mm deep +0.06mm/-0.04mm & 0.12mm wide +0.01mm/-0.02mm). Inc... | 1 | |
| AFNDT-SRS-082S-1 | EDDY CURRENT SURFACE BLOCK 4130 STEEL. 2 EDM SLOTS ( 0.2mm deep +/-0.05mm & 0.12mm wide +/- 0.01mm). EDM NOTCH#1 ( 0.5mm deep +0.06/-0.04 & 0.12 wide +0.01/-0.02 ), and EDM NOTCH #2 ( 1.0mm deep +0.06mm/-0.04mm & 0.12mm wide +0.01mm/-0.02mm). Includes ... | 1 | |
| AFS-1372 | 412A5MHZ35AL TRANSVERSE WAVE FROM GEGELEC SA (REFER TO CHAPTER 51-42-01 PABE BLOCK 401) | 1 | |
| AFS-1373 | 412A5MHZ40AL TRANSVERSE WAVE FROM GEGELEC SA (REFER TO CHAPTER 51-42-01 PABE BLOCK 401) | 1 | |
| AFS-1374 | 412A5MHZ45AL TRANSVERSE WAVE FROM GEGELEC SA (REFER TO CHAPTER 51-42-01 PABE BLOCK 401) | 1 | |
| AFS-1375 | 412A5MHZ30AL 30° TRANSVERSE WAVE FROM GEGELEC SA (REFER TO CHAPTER 51-42-01 PAGE BLOCK 401). CASE SIZE: .75" LONG x .340" WIDE x 500" HIGH. | 1 | |
| AFS-1378 | 412A5MHZ65AL TRANSVERSE WAVE FROM GEGELEC SA (REFER TO CHAPTER 51-42-01 PAGE BLOCK 401). Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1379 | 412A5MHZ70AL TRANSVERSE WAVE FROM GEGELEC SA (REFER TO CHAPTER 51-42-01 PABE BLOCK 401) | 1 | |
| AFS-1380 | 412A5MHZ60AL TRANSVERSE WAVE FROM GEGELEC SA (REFER TO CHAPTER 51-42-01 PABE BLOCK 401) | 1 | |
| AFS-1381 | 412A5MHZ55AL TRANSVERSE WAVE FROM GEGELEC SA (REFER TO CHAPTER 51-42-01 PABE BLOCK 401) | 1 | |
| AFS-1382 | 412A5MHZ50AL TRANSVERSE WAVE FROM GEGELEC SA (REFER TO CHAPTER 51-42-01 PABE BLOCK 401) | 1 | |
| AGE-00076-003 | WRENCH - TORQUE, LOCK NUT P/N AGE-00076-003 | 3 | |
| AGE-02402-401 | HARNESS - GUST LOCK TEST P/N AGE-02402-401 | 2 | |
| ANDT1081 | CALIBRATION BLOCK (0.056"-0.067") | 2 | |
| ASNA0045-050CC | SELF LOCKING NUT I/C 192869170 REFERENCE: SAFRAN SB 418-22-091 | 1 | |
| B27007 | LOCK -0 SET SPOILER ACTUATOR | 1 | |
| B27008 | LOCK -0 T.E. FLAP, POWER DRIVE UNIT | 1 | |
| B27009 | LOCK -0 OUT EQUIPMENT-PCU, ELEVATOR | 1 | |
| B27009-12 | LOCK OUT EQUIPMENT PCU ELEVATOR(F27-0249) | 21 | |
| B27010 | LOCK -0 AILERON ACTUATOR | 1 | |
| B27013 | LOCK EQUIPMENT -0 RUDDER PCU | 1 | |
| B27013-20 | LOCK EQPT -0 RUDDER PCU | 13 | |
| B27016-37 | LOCK EQUIPMENT(BT)TC/SF-27-DHI-10-01 | 12 | |
| B27020 | LOCK SET -0 L.E. SLAT DRIVE | 1 | |
| B27023 | RIGGING BLOCK EQPT -0 ELEVATOR AFT QUADRANT | 1 | |
| B27023-48 | RIGGING BLOCK -0 | 3 | |
| B27054 | BLOCK -0 AILERON PCU LEAK TEST | 1 | |
| B27065 | LOCK SET -0 CURCUIT BREAKER | 1 | |
| B27073 | LOCKOUT TOOL -0 OUTBOARD SLAT | 1 | |
| B27077 | LOCK -0 L.E. SLAT DRIVE | 1 | |
| B27077-2-HM | HYDRO MFD PARTS -0 LOCK | 1 | |
| B32001 | DOWNLOCK -0 MLG & NLG | 1 | |
| B32012 | LOCK EQUIPMENT -0 DOOR ACTUATOR, MLG | 1 | |
| B32012-45 | LOCK EQPT -0 MLG DOOR ACTUATOR | 23 | |
| B32013 | LOCK -0 DOOR ACTUATOR, NOSE LANDING GEAR | 1 | |
| B32013-12-M | NLG LOCK -0 DOOR ACTUATOR | 1 | |
| B32013-13 | NLG LOCK -0 DOOR ACTUATOR | 3 | |
| B32026 | FIXTURE -0 STAKING, ACTUATOR, NLG LOCK | 1 | |
| B32028 | LOCK EQUIPMENT -0 SHOCK STRUT, MLG | 1 | |
| B32028-21 | LOCK EQUIPMENT -0 MLG | 3 | |
| B32030 | FIXTURE -0 LOCK ACTUATOR, OVERHAUL EQPT, NLG | 1 | |
| B32033 | WRENCH EQUIPMENT -0 ALTERNATE UPLOCK RELEASE | 1 | |
| B32034 | WRENCH EQUIPMENT -0 ALTERNATE UPLOCK RELEASE | 1 | |
| B32037 | TEST EQUIPMENT -0 UPLOCK ASSY, MLG | 1 | |
| B32038 | EXTENDER -0 UPLOCK SPRING, MLG | 1 | |
| B32049 | PIN SET -0 DOWNLOCK, NLG & MLG | 1 | |
| B32051 | SPRING EXTENDER -0 LOCK RELEASE ACTUATOR, NG & | 1 | |
| B32054 | ADAPTER -0 UPLOCK, MAIN LANDING GEAR | 1 | |
| B32065 | TEST FIXTURE -0 MAIN LANDING GEAR DOWNLOCK | 1 | |
| B32069 | LOCKOUT PIN -0 FWD & AFT LOCK LINK, RETR TAIL | 1 | |
| B52008 | ADAPTER -0 CLOCKING NO.1 & NO.2 CARGO DOOR | 1 | |
| B71009 | LOCK -0 ’C’ DUCT ACTUATOR, RB211 ENGINE | 1 | |
| B78001-24 | LOCK - THRUST REVERSER ISOLATION VALVE (GROUND, FLYAWAY & DISPATCH) (AMM : 78-00-00-040-801-H01) | 13 | |
| B78013-2 | OVERHAUL EQPT -0 T/R LOCKING ACTUATOR ASSY | 3 | |
| BAT-54SBK | DRILL GUIDE BLOCK ID-0.500" | 1 | |
| BLS 5BS 23 S | SP-32-015 RELEASED POSITION LOCK SAFETY PIN NLG | 1 | |
| C27038-6 | LOCKOUT PIN L/E DEPRESSURISATION VALVE 737NG AMM 27-81-00-040-801 | 21 | |
| C27046-13 | SET -0 LOCK INBD GROUND | 26 | |
| C27046-2 | LOCK -0 I/B SPOILER LOCK | 5 | |
| C27051-29 | LOCKOUT SET - LEADING EDGE SLATS AND KRUEGER FLAPS ACTUATORS TASK 27-81-00-440-801 | 26 | |
| C27057-1-M | LOCK -0 RUDDER PCU REMOVED | 1 | |
| C27057-4 | LOCK -0 WELDMENT | 1 | |
| C32026-1 | DOWNLOCK EQUPT. -0 NLG/MLG | 26 | |
| C78027-1 | TORQUE FIXTURE -0 LOCKING & NON-LOCKING THRUST | 4 | |
| CFM56 9970-958-579 | EDDY CURRENT SURFACE REFERENCE BLOCK. 2 EDM NOTCHES .012" Deep x .004" Wide and .020" Deep x .004" Wide. Tolerance on Width (.004" W +/- .002"), Material: Inconel 600 Series. Reference: CFM56-5B S/B 72-0620 PAGE 14. Includes Test Report and Certificate | 2 | |
| CRES 17-4PH | BOMBARDIER CHALLENGER EDDY CURRENT SURFACE BLOCK CRES 17-4PH STEEL. PART6 78-30-06 PAGE 27, 0.008", 0.020" and 0.040" EDM NOTCHES. Includes Certification Report Tracable to NIST. | 2 | |
| DIBR-0105 | CLOCKWISE TOOLS MGBR-01 MAGNETIC BASE STAND FOR DIGITAL DIAL INDICATOR GAUGE | 1 | |
| E53-003 | BLOCK SET, AL, DIMENSION 160 X 135 EMB190 PART 6 51-06-00 | 1 | |
| F27575000 | SP-32-008 RELEASED POSITION LOCK SAFETY PIN MLG | 1 | |
| F27576000 | SP-32-015 RELEASED POSITION LOCK SAFETY PIN NLG | 1 | |
| F70008 | DOWNLOCK ASSY -0 NOSE LANDING GEAR USED TO | 1 | |
| F70027 | LOCK ASSY -0 MAIN LANDING GEAR OLEO USED TO LOCK | 1 | |
| F70084 | LOCK ASSY -0 THROTTLE RIGGING USED TO INDEX THE | 1 | |
| F70112 | LOCK ASSY -0 MLG OLEO USED TO LOCK THE MAIN | 1 | |
| F70118 | LOCK -0 EXTERNAL RUDDER USED TO HOLD THE RUDDER | 2 | |
| F70144 | LOCK ASSY -0 WING LEADING EDGE FLAP TO LOCK THE | 1 | |
| F70157 | LOCK ASSY -0 CARGO DOOR ACTUATOR USED TO LOCK | 1 | |
| F70256 | WRENCH ADAPTER -0 LOCKNUT, ACTUATOR USED TO | 1 | |
| F70281 | LOC.BLOCK SET -0 FAN REV COWL RING, JT3D TO HOLD | 1 | |
| F70314 | ALIGNMENT PIN -0 MLG AXLE LOCK BOLT TO ALIGN THE | 1 | |
| F71126 | LOCK ASSY -0 MAIN LANDING GEAR TO PREVENT | 1 | |
| F71264 | LOCK ASSY -0 SPOILER ACTUATOR USED TO PREVENT | 1 | |
| F72729 | LOCK -0 ELEVATOR USED DURING REMOVAL AND INSTL. | 1 | |
| F72771 | LOCK ASSEMBLY -0 FLIGHT CONTROLS USED TO PREVENT | 1 | |
| F72794 | PLUG -0 FERRY FLIGHT ENGINE OUTLET USED TO BLOCK | 1 | |
| F72827 | LOCK FOOT ASSY -0 CARGO PALLET THE LOCK FOOT | 1 | |
| F72885 | LOCK PIN -0 TAIL SKID GROUND SAFETY USED TO LOCK | 1 | |
| F72885-1 | LOCK PIN -0 TAIL SKID GROUND | 1 | |
| F72912 | LOCK-SET -0 GROUND SPEED BRAKE LOCK ASSY ARE | 1 | |
| F72960 | DOWN LOCK -0 MAIN GEAR DOORS TO PREVENT | 1 | |
| F72979 | PROTRACTOR -0 SPOILER LOCKOUT INSTL. MAIN GEAR. | 1 | |
| F72982 | RUDDER LOCK -0 UPPER OR LOWER USED WHEN POWER | 1 | |
| F72985 | ACTUATOR -0 LOCK OUT FITTING, L.E. SLAT NO. 4&5 | 1 | |
| F80049-65 | ASSEMBLY - LOCK, FLIGHT CONTROLS (USED ON VALVE P/N 10-60581-2 AND 10-60581-3). TASK 27-81-00-440-801 | 15 | |
| F80109-3 | LOCK -0 THRUST REVERSER ISOLATION VALVE | 10 | |
| FT03 | LOCKER BANK W/CONTROLLER 01-07 | 1 | |
| FT05 | LOCKER BANK W/CONTROLLER 01-07 | 1 | |
| FW01-A | LOCKER 01-07 | 1 | |
| G1002760001-023 | GSE 27C-60-05 WEDGE BLOCK | 4 | |
| G21001 | LOCKOUT -0 TEST SWITCH, N2 ENGINE SPEED DISCRETE | 1 | |
| G21006 | ADJUSTMENT TOOL -0 TENSION, CARD LOCK | 1 | |
| G27001 | LOCK OPEN EQPT -0 INBD SPOILER ACTUATOR NO. 5 & | 1 | |
| G27002 | LOCK OPEN EQPT -0 INBD SPOILER ACTUATOR NO. 6 & | 1 | |
| G27008 | LOCK EQPT -0 RUDDER ACTUATOR | 1 | |
| G27024 | LOCK -0 FLAP LEVER | 1 | |
| G27024-1 | LOCK -0 FLAP LEVER | 9 | |
| G27032 | ACTUATOR LOCK -0 OUTBOARD SPOLER | 1 | |
| G27037 | LOCK EQUIPMENT -0 T.E. FLAP SYSTEM | 1 | |
| G27039 | TEST JIG EQPT -0 LOCKOUT MECHANISM, OUTBOARD | 1 | |
| G30001 | BLOCK -0 HEIGHT GAGE, WIPER ARM | 1 | |
| G30001-1 | BLOCK -0 HEIGHT GAGE, WIPER | 3 | |
| G32003 | TEST SET -0 NOSE GEAR INTERLOCK ACTUATOR | 1 | |
| G32035 | TEST FIXTURE -0 DOWNLOCK ACTUATOR, WLG & BLG | 1 | |
| G32036 | PIN ASSY EQPT -0 GROUND LOCK, NOSE LANDING GEAR | 1 | |
| G700-523103-1 | Internal Baggage Door Lock (Pre Sb700-52-034/Sb700-1A11-52-011) | 2 | |
| G700-523103-15 | Internal Baggage Door Lock (Post Sb700-52-034/Sb700-1A11-52-011) | 2 | |
| H513S-05-20 | G84 LOCKBOLT PULLING HEADSH513S-05-20 | 2 | |
| H513S-06-20 | G84 LOCKBOLT PULLING HEADSH513S-06-20 | 1 | |
| Holding Block No.1 | Honeywell Holding Block No.1, 32-49-01 page 4.E.-3. Includes Test Report and Certificate of Conformance. | 1 | |
| Holding Block No.2 | Honeywell Holding Block No.2, 32-49-01 page 4.E.-4. Includes Test Report and Certificate of Conformance. | 1 | |
| J21006-1 | LOCK - HOLD OPEN, OUTFLOW VALVE (***DISPATCH***)(AMM : 21-31-00-040-802-001) | 10 | |
| J27028-31 | LOCK – ONLY FOR RUDDER POWER CONTROL UNIT REF B777 ITEM 27-20-03 | 11 | |
| J27035-2 | LOCK #1 -0 WELDMENT | 1 | |
| J27035-2WDMT | LOCK -0 WELDMENT | 1 | |
| J27035-3 | LOCK #2 -0 WELDMENT | 1 | |
| J27035-3WDMT | LOCK -0 WELDMENT | 1 | |
| J27035-4 | LOCK #3 -0 WELDMENT | 1 | |
| J27035-42 | LOCK #5 -0 WELDMENT | 2 | |
| J27035-4WDMT | LOCK -0 WELDMENT | 1 | |
| J27035-5 | LOCK #4 -0 WELDMENT | 1 | |
| J27035-53 | LOCK #6 -0 WELDMENT | 1 | |
| J27035-53WDMT | LOCK -0 WELDMENT | 1 | |
| J27035-55-HM | HYDRO MFD PARTS -0 LOCK EQPT | 1 | |
| J27035-58 | LOCK EQPT -0 FLAP WITH TRANSMISSIONS REMOVED | 1 | |
| J27035-5WDMT | LOCK -0 WELDMENT | 1 | |
| J27035-60 | LOCK #4 -0 WELDMENT | 1 | |
| J32090-17 | REMOVAL/INSTALLATION EQUIPMENT, MLG DOWNLOCK SPRING (POST SB 777-32-0081) | 6 | |
| J32090-53 | REMOVAL/INSTALLATION EQUIPMENT, MLG DOWNLOCK SPRING (POST SB 777-32-0081) | 6 | |
| J32090-70 | REMOVAL/INSTALLATION EQUIPMENT, MLG DOWNLOCK SPRING (POST SB 777-32-0081) | 8 | |
| K27038 | LOCK -0 RUDDER PCU | 1 | |
| MIT65B01290-1 | ASSY FIXTURE -0 UPLOCK | 1 | |
| MIT65B01290-1-M | ASSY FIXTURE -0 UPLOCK | 1 | |
| MS14531-2C1022122 | SP-32-008 RELEASED POSITION LOCK SAFETY PIN MLG | 1 | |
| PDL 1037AJ | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 PAGE 30 FIG 20, 7075-T6 ALUMINUM | 1 | |
| PDL 1037BJ | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 PAGE 31 FIG 21, 7075-TG ALUMINUM | 1 | |
| PDL 1214J | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 22 | 2 | |
| PDL 1215J | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 23 PAGE 33, 7075-T6 ALUMINUM | 2 | |
| PDL 1217AJ | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 24 PAGES 34, 7075-T6 ALUMINUM | 1 | |
| PDL 1217BJ | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 25 PAGE 35, CAST ACRYLIC SHEET | 1 | |
| PDL 1217CJ | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 26 PAGE 36, CAST ACRYLIC SHEET | 1 | |
| PDL 1254J | HERCULES C-130 UT CALIBRATION STANDARD FIGURE 21 SHEETS 1-4 20-40-00. FASTENER (HLT116 HI-LOCK FASTENERS WITH SELF LOCKING NUTS). Includes Test Report Traceable to NIST and Certificate of Conformance. | 2 | |
| PDL 419J | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 2 PAGE 4, 2024-T3 ALUMINUM | 1 | |
| PDL 447J | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 4, 7075-T6 ALUMINUM | 2 | |
| PDL 457AJ | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 6 PAGES 8&9 SHEET 1&2, 7075-T6 ALUMINUM | 2 | |
| PDL 457SJ | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 6 PAGES 8&9 SHEET 1&2, 4340 STEEL | 2 | |
| PDL 457SS | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 6 PAGES 8&9 SHEET 1&2 304 STAINLESS STEEL | 2 | |
| PDL 459J | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 7 PAGE 10, 7075-T6 ALUMINUM | 1 | |
| PDL 843J | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 9 FASTENER (HL21-6-4 + TLN 1030.3) | 2 | |
| PDL 919 | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 11 SHEET 1&2, 7075-T6 ALUMINUM, FASTENERS (HL64PB-10-9, HLT114-6-8, HLT18PB-12, HL70) | 2 | |
| PDL 919J | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 11 SHEET 1&2, 7075-T6 ALUMINUM, FASTENERS (HL64PB-10-9, HLT114-6-8, HLT18PB-12, HL70) | 1 | |
| PDL 941J | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 13 PAGE 19, 7075-T6 ALUMINUM | 1 | |
| PDL 958 | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 PAGE 23 FIGURE 16 2024-T3 ALUMINUM | 1 | |
| Q47749 | GUIDE FOR THE INSTALLATION OF THE DRIVE BLOCKS (2-060) | 9 | |
| SE32-1001 | ADJUSTING TOOL -0 MLG DOOR LOCK SWITCH TO TEST | 1 | |
| SE78-3010 | COMPRESSOR -0 TR LOCK ACTUATOR RING TO COMPRESS | 1 | |
| ST8870-7 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE( 1-10 PLY), PT 1 51-04-00, PAGE 21 FIGURE 8. SUPPLIED WITH HOLDING BLOCK | 4 | |
| ST8870-8 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE( 11-20 PLY), PT 1 51-04-00, PAGE 21 FIGURE 8. SUPPLIED WITH HOLDING BLOCK | 5 | |
| ST8870-9 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE( 21-30 PLY), PT 1 51-04-00, PAGE 19 FIGURE 8. SUPPLIED WITH HOLDING BLOCK | 4 | |
| ST933-100 | SWAGING TOOL-SHAFT -0 BEARING RING LOCK | 1 | |
| STD-576 | LOCK - CIRCUIT BREAKER (COMMERCIALLY AVAILABLE - PER SWPM 20-00-10 OR EQUIVALENT) | 1 | |
| TP54 | Split Calibration block-AL, A318/A319/A320/A321 51-10-01-PB6 PG 10 FG 51-10-01-991-005-A SHEET 01, A300-600 PT6 51-63-08 PG 601 FG 601, | 2 | |
| TP54-02-1 | SPLIT CALIBRATION BLOCK-AL, 15MM-28MM HOLES, A318/A319/A320/A321 NTM 51-63-07, 7075-T6 | 2 | |
| TP54-10-1 | SPLIT CALIBRATION BLOCK-AL, 15MM-28MM HOLES, A318/A319/A320/A321 NTM 51-63-07, 7075-T6 | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
