| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 460007000-1 | LOC N BLOCK | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 100A505656 | MOUNTING BLOCK | 1 | |
| (CALIB) 10-0108-00 | CALIBRAITION BLOCK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 6583102-1 | CALIBRATION BLOCK (CALIBRATION) | 1 | |
| (CALIB) 97A32402018000 | GAGE PRESSURE GAGE-BRAKE BLOCK HYDRA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98S27005006000 | PITCH UNCPLG RESET LEVER BLOCKING SET KIT | 1 | |
| (CALIB) 98S27105002000 | AILERON BLOCKING TOOL (SPRG TAB) | 1 | |
| (CALIB) 98S55305011-0003 | CALIBRATION BLOCK (CALIBRATION) | 1 | |
| (CALIB) 98S57105032200 | CALIBRATION BLOCK | 1 | |
| (CALIB) 98S57105032202 | CALIBRATION BLOCK | 1 | |
| (CALIB) 99A53307292001 | Reference Block (NDT) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99D54403007000 | REFERENC REFERENCE BLOCK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99D57204164001 | BLOCK-REFERENCE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99F53303032000 | REFERENCE BLOCK (CALIBRATION) | 1 | |
| (CALIB) 99F54503011000 | REFERENCE BLOCK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99F54503012000 | REFERENCE BLOCK FOR A330 NTM 54 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G38004-17 | Blockage Removal Tool - Vacuum Lav System (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G38006-1 | EQUIPMENT - REMOVAL,WASTE BLOCKAGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MA8158-7 | FWD Bootstrap Chain Block (CALIBRATION) (CALIBRATION) | 1 | |
| 00001445 | CHAFF AND FLARE TEST BLOCK(CFT | 1 | |
| 00029ETD001 | ALIGNMENT BLOCK (AIR PRESS SUPPLY) | 1 | |
| 01TB0660TSEO | DIFERENTIAL PRESSURE INDICATOR TEST BLOCK | 1 | |
| 02-7813-0100 | TRONAIR HYDRAULIC JACK (MLG AND NLG) USED WITH SPECIAL BLOCK KIT | 9 | |
| 02-7813C0100-A5 | Axle Jack - 12 Ton (Ce) - Without Spacer Blocks | 3 | |
| 05384 | CALIBRATION BLOCK | 1 | |
| 0111592 | Terminal Block | 1 | |
| 0426695 | CALIBRATION BLOCK | 1 | |
| 0292697900 | TERMINAL BLOCK, ELEC | 2 | |
| 0292720810 | RAISING PLATE OF FILTER SUPPORT BLOCK | 1 | |
| 0298707080 | BLOCK,CONNECTION | 1 | |
| 0298717330 | BLOCK,CONNECTION | 1 | |
| 0298727550 | BLOCK,CONNECTION | 1 | |
| 0298727810 | BLOCK ASSY,OIL DISTRIBUTION | 1 | |
| 0298727820 | UNION BLOCK | 1 | |
| 0298730710 | FRAIN BLOCK SUPPORT | 1 | |
| 0298738090 | COUPLING BLOCK | 1 | |
| 0298918070 | HP PUMP BLOCK-REGULATED DISPENSER | 1 | |
| 0301510710 | JUNCTION BLOCK | 1 | |
| 0301520430 | CONNECTING BLOCK | 1 | |
| 06ND78120-1 OR -7 | DEPLOY BLOCK TO HOLD THRUST REVERSER IN DEPLOYED | 1 | |
| 06ND78120-9 | DEPLOY BLOCK TO HOLD THRUST REVERSER IN DEPLOYED POSITION | 1 | |
| 07-300-4263 | Swivel Dimpling Combo With Punch & Die Block (Description: .401 Shank Female Swivel Holder) (Rivet diameter: 3/32") (Add to cart: Add To Cart) | 1 | |
| 07-300-4264 | Swivel Dimpling Combo With Punch & Die Block (Description: .401 Shank Female Swivel Holder) (Rivet diameter: 3/32") (Add to cart: Add To Cart) (Description: .401 Shank Female Swivel Holder) (Rivet diameter: 1/8") (Add to cart: Add To Cart) | 1 | |
| 07-300-4265 | Swivel Dimpling Combo With Punch & Die Block (Description: .401 Shank Female Swivel Holder) (Rivet diameter: 3/32") (Add to cart: Add To Cart) (Description: .401 Shank Female Swivel Holder) (Rivet diameter: 1/8") (Add to cart: Add To Cart) (Description: . | 1 | |
| 07-300-4266 | Swivel Dimpling Combo With Punch & Die Block (Description: .401 Shank Female Swivel Holder) (Rivet diameter: 3/32") (Add to cart: Add To Cart) (Description: .401 Shank Female Swivel Holder) (Rivet diameter: 1/8") (Add to cart: Add To Cart) (Description: . | 1 | |
| 07-301-4263 | Swivel Dimpling Combo With Punch & Die Block (Description: .401 Shank Female Swivel Holder) (Rivet diameter: 3/32") (Add to cart: Add To Cart) (Description: .401 Shank Female Swivel Holder) (Rivet diameter: 1/8") (Add to cart: Add To Cart) (Description: . | 1 | |
| 07-301-4264 | Swivel Dimpling Combo With Punch & Die Block (Description: .401 Shank Female Swivel Holder) (Rivet diameter: 3/32") (Add to cart: Add To Cart) (Description: .401 Shank Female Swivel Holder) (Rivet diameter: 1/8") (Add to cart: Add To Cart) (Description: . | 1 | |
| 07-301-4265 | Swivel Dimpling Combo With Punch & Die Block (Description: .401 Shank Female Swivel Holder) (Rivet diameter: 3/32") (Add to cart: Add To Cart) (Description: .401 Shank Female Swivel Holder) (Rivet diameter: 1/8") (Add to cart: Add To Cart) (Description: . | 1 | |
| 07-301-4266 | Swivel Dimpling Combo With Punch & Die Block (Description: .401 Shank Female Swivel Holder) (Rivet diameter: 3/32") (Add to cart: Add To Cart) (Description: .401 Shank Female Swivel Holder) (Rivet diameter: 1/8") (Add to cart: Add To Cart) (Description: . | 1 | |
| 070C001 | ALUMINIUM TEST BLOCK | 1 | |
| 078-540-000 | REFERENCE BLOCK - FERROUS (VARIANT FITTED W 4 SHIMS 0,5MM THICK EA) | 1 | |
| 078-540-038 | REFERENCE BLOCK TITANIUM (VARIANT FITTED WITH 4 SHIMS 0,5MM THICK EA) | 1 | |
| 078-540-039 | REFERENCE BLOCK STAINLESS STEEL (VARIANT FITTED 4 SHIMS 0,5MM THICK EA) | 1 | |
| 078-540-040 | REFERENCE BLOCK ALUNINIUM (VARIANT FITTED WITH 4 SHIMS 0,5MM THICK EA) | 1 | |
| 08-1000-1 | Swivel Dimpling Combo With Punch & Die Block (Description: .401 Shank Female Swivel Holder) (Rivet diameter: 3/32") (Add to cart: Add To Cart) (Description: .401 Shank Female Swivel Holder) (Rivet diameter: 1/8") (Add to cart: Add To Cart) (Description: . | 1 | |
| 08-1000-2 | Swivel Dimpling Combo With Punch & Die Block (Description: .401 Shank Female Swivel Holder) (Rivet diameter: 3/32") (Add to cart: Add To Cart) (Description: .401 Shank Female Swivel Holder) (Rivet diameter: 1/8") (Add to cart: Add To Cart) (Description: . | 1 | |
| 08-1106T | TUNGSTEN BLOCK TOOL | 1 | |
| 0S22832 | BLOCK RIVETING | 1 | |
| 0S22975 | DUMP VALVE PRESSURIZATION VALVE BLOCK TOOL EMB-120 | 1 | |
| 0U 145426 | VALVE BLOCK CONTROL LEVER | 1 | |
| 0U130839 | ADJUSTING BLOCK | 1 | |
| 0U144865 | SETTLING BLOCK | 1 | |
| 0U144866 | SETTLING BLOCK | 1 | |
| 0U144867 | SETTLING BLOCK | 1 | |
| 0U144933 | SETTLING BLOCK | 1 | |
| 0U144933PM | SETTLING BLOCK | 1 | |
| 0U144938 | SETTLING BLOCK | 1 | |
| 0U144938PM | SETTLING BLOCK | 1 | |
| 0U144947 | SETTLING BLOCK | 1 | |
| 0U144947PM | SETTLING BLOCK | 1 | |
| 0U144948 | SETTLING BLOCK | 2 | |
| 0U144948PM | SETTLING BLOCK | 1 | |
| 0U144954 | SETTLING BLOCK | 1 | |
| 0U144954PM | SETTLING BLOCK | 1 | |
| 0U144956 | SETTLING BLOCK | 1 | |
| 0U144956PM | SETTLING BLOCK | 1 | |
| 0U144958 | Settling Block | 1 | |
| 0U144959 | SETTLING BLOCK | 1 | |
| 0U144959PM | SETTLING BLOCK | 1 | |
| 0U144960 | SETTLING BLOCK | 1 | |
| 0U144960PM | SETTLING BLOCK | 1 | |
| 0U144962 | SETTLING BLOCK | 1 | |
| 0U144962PM | SETTLING BLOCK | 1 | |
| 0U190825 | HYDRAULIC CONTROL BLOCK | 1 | |
| 0U190846 | HYD CONTROL BLOCK TEST TOOL | 1 | |
| 1-2607948 | HOLDING BLOCK | 1 | |
| 1-2609502-1 | HOLDING BLOCK | 1 | |
| 1-2609932-1 | HOLDING BLOCK | 1 | |
| 1-2615480 | HOLDING BLOCK | 1 | |
| 1-2616849 | HOLDING BLOCK | 1 | |
| 10-0108-00 | CALIBRATION BLOCK | 1 | |
| 10-0109-00 | CALIBRATION BLOCK | 2 | |
| 10-0120-00 | CALIBRATION BLOCK | 1 | |
| 10-0121-00 | CALIBRATION BLOCK | 1 | |
| 1002 | NDT REFERENCE BLOCK (ET ) | 4 | |
| 100A505656 | MOUNTING BLOCK | 1 | |
| 100A505656-1 | MOUNTING BLOCK | 1 | |
| 100A505656PM | MOUNTING BLOCK | 1 | |
| 1051 | Calibration Block | 1 | |
| 1052 | Calibration Block | 1 | |
| 1053 | Calibration Block | 1 | |
| 1054 | Calibration Block | 2 | |
| 106P12 | CALIBRATION BLOCK (HOCKING) | 1 | |
| 1077 | Calibration Block | 1 | |
| 107S1ALUM | ULTRASONIC TEST BLOCK | 1 | |
| 10OHME65B00116-14 | Index block | 1 | |
| 10STEP-IA | CALIBRATION BLOCK - 7075-T6 | 1 | |
| 113-226-000 | EDDY CURRENT CALIBRATION BLOCK | 1 | |
| 1159GSE50240-1 | HORIZONTAL STABILIZER STOP BLOCK | 2 | |
| 118-540-400 | STANDARD BLOCK ;SPECIFICATION: V1 ;CRACK SIZE: 1 MM | 1 | |
| 1217-737LJR | BLOCK (PART OF P/NO. RVS-SDMS-001) | 1 | |
| 126 | Surface Crack Calibration Block | 7 | |
| 127-0-032 | CORROSION CALIBRATION BLOCK | 1 | |
| 127-0-040 | CORROSION CALIBRATION BLOCK | 1 | |
| 127-0-063 | CORROSION CALIBRATION BLOCK | 1 | |
| 127-XXX | Corrosion reference standard Calibration Block | 1 | |
| 12AAA787 | Mitutoyo 12AAA787 Block for Calibrating Probe Diameter | 1 | |
| 130-.350 | BOEING GLASS THICKNESS STANDARD TEST BLOCK | 1 | |
| 1327LMT | SETTING BLOCK.AND SPECIAL GEAR | 1 | |
| 185 | NDT REFERENCE BLOCK (ET ) | 2 | |
| 186 | CALIBRATION BLOCK | 1 | |
| 189 | Calibration Block | 7 | |
| 194 | Calibration Block | 9 | |
| 221 | 221=H D SECTIONAL BLOCK | 3 | |
| 310.102 | BLOCK IN V DIGIMESS 70 X 72 X 60 MM 310,102 | 2 | |
| 321 | SEAL, TERMINAL, BLOCK | 7 | |
| 145-15998-001 | REFERANCE BLOCK | 3 | |
| 1507 | BLOCK / SPRING | 6 | |
| 1704 | EDDY CURRENT CALIBRATION BLOCK | 6 | |
| 1830 | CONTACT BLOCK (HEAD STOCK 1830) | 1 | |
| 3021 | REFERENCE BLOCK 3021 | 1 | |
| 3230 | REFERENCE BLOCK (BOEING BONDED STANDARD 737) | 1 | |
| 3233 | REFERENCE BLOCK (BOEING BONDED STANDARD 737) | 4 | |
| 3238 | Machined Block | 1 | |
| 10183 | MAGNA‐THIN THICKNESS BLOCK WITH 5 STEPS (0.020 / (0.040 / 0.060 / 0.080 / 0.100 INCH) | 1 | |
| 10471 | EDDY CURRENT CALIBRATION BLOCK | 1 | |
| 10499 | EDDY CURRENT CALIBRATION BLOCK | 1 | |
| 14143 | BLOCK: CONTACT,GRN, | 1 | |
| 14261 | VIXEN FILE ON PALM BLOCK | 1 | |
| 14531 | Red Box 4X Rivet Gun Set with Blocks | 1 | |
| 14539 | RED BOX 4X RIVET GUN SET WITH BLOCKS | 1 | |
| 14755 | BLOCK: TESTING, | 1 | |
| 16720-THB | TEST HOUSING BLOCK | 1 | |
| 16S53605002000 | SERVICE DOOR BLOCKING TOOL | 7 | |
| 17-4PH BLOCK | 17-4 PH Steel Block 110mm(3.937") x 18mm(7.09") x 15mm(.591") Block. Material: 17-4PH Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| 17010 | 37 FLARING BLOCK FOR 1/8" TUBE | 4 | |
| 100002 | RUBBER SANDING BLOCK | 1 | |
| 101061 | Holding Block Housing Assy. | 2 | |
| 118351 | HOLDING BLOCK | 1 | |
| 131387 | EDDY CURRENT CALIBRATION TEST BLOCK | 1 | |
| 133034 | FSM-2 METER AND REFERENCE BLOCK KIT | 1 | |
| 133038 | REFERENCE BLOCK | 1 | |
| 133042 | REFERENCE BLOCK | 1 | |
| 149205 | Cal Block No.2-12.5mm (MS) | 1 | |
| 149273 | Cal Block No.2-20mm (MS) | 1 | |
| 149279 | DAC Calibration Block (MS) | 1 | |
| 149289 | CBU Universal Test Block | 1 | |
| 149342 | PA Calibration Block (MS) | 1 | |
| 154400 | BLOCK: TEST,STAINLESS STEEL, FOR WASHABILITY | 1 | |
| 1003164 | ENGINE BLOCK HEATER | 1 | |
| 1027421 | CALIBRATION BLOCK | 1 | |
| 1048463 | CONTACT BLOCK, 1NC. (AIR START MODEL: ASU-600-150-CUP) | 1 | |
| 1100114 | CALIBRATION BLOCK (2-164-551) NFE | 1 | |
| 1120203 | BLOCK, CLAMPING | 1 | |
| 14128315 | HYDRAULIC BLOCK OFF KIT, '' LIEBHERR'' ID # 14128315, FOR LIEBHERR CRANE, S/NO. 170328 | 1 | |
| 124130999 | PRESSURE REGULATOR–MANOMETER BLOCK | 1 | |
| 170T05570-001 | LEAK-DETECTOR-SENSOR FORMING BLOCK | 2 | |
| 171T17969-401 | CALIBRATION BLOCK | 3 | |
| 181-903-10 | INSPECTION V-BLOCKS | 1 | |
| 186A | Calibration Block | 3 | |
| 186ABCDEF | ET CALIBRATION TEST BLOCK | 1 | |
| 186B | Calibration Block | 3 | |
| 186C | Calibration Block | 4 | |
| 186D | Calibration Block | 4 | |
| 186E | Calibration Block | 4 | |
| 186F | Calibration Block | 3 | |
| 188A | CALIBRATION BLOCK | 5 | |
| 1900077 | LAPPING BLOCK | 1 | |
| 1900078 | LAPPING BLOCK | 1 | |
| 1900089 | LAPPING BLOCK | 1 | |
| 1900130 | MOUNTING BLOCK AND SHAFT LOCK FIXTURE | 1 | |
| 1900130-1 | MOUNTING BLOCK AND SHAFT LOCK FIXTURE | 1 | |
| 1900183 | ROTATING GROUP AND ANGLE BLOCK ASSY. | 1 | |
| 1900186 | SPRING-CYL BLOCK,RETAINER & DRIVE SHAFT ASSY TOOL | 1 | |
| 1900200 | LAPPING BLOCK | 1 | |
| 1900201 | LAPPING BLOCK | 1 | |
| 1900207 | CYLINDER BLOCK END PLAY GAUGE | 1 | |
| 1900232 | ANGLE BLOCK AND PIN ASSEMBLY TOOL | 1 | |
| 1900265 | LAPPING BLOCK PISTON & SLIDE | 1 | |
| 1900548 | CYLINDER BLOCK END PLAY TOOL | 1 | |
| 1900550 | CYLINDER BLOCK SPRING COMPRESSOR | 1 | |
| 1900632 | LAPPING BLOCK | 1 | |
| 1900651 | Block End Play Tool | 1 | |
| 1900675 | BLOCKING VALVE CAP RESIZING TOOL | 1 | |
| 1900676 | BLOCKING VALVE CAP BULLET | 1 | |
| 1900683 | BLOCKING VALVE SLEEVE RESIZING TOOL | 1 | |
| 1900684-1 | BLOCKING VALVE SLEEVE BULLET | 1 | |
| 1900684-2 | BLOCKING VALVE SLEEVE BULLET | 1 | |
| 1900742 | LAPPING BLOCK | 1 | |
| 1900857 | MEASURING BLOCK | 1 | |
| 1900861 | VALVE BLOCK INSERTION TOOL | 1 | |
| 1900949 | CYLINDER-BLOCK END-PLAY TOOL | 1 | |
| 1901036 | CYLINDER BLOCK ASSEMBLY ADAPTOR | 1 | |
| 1901073 | EMP VALVE BLOCK HOLDING TOOL | 1 | |
| 1901113 | CYLINDER BLOCK ENDPLAY MEASUREMENT TOOL | 1 | |
| 1919611 | 3 CUT TITANIUM BLOCK | 1 | |
| 194A | Calibration Block | 4 | |
| 194C | CALIBRATION BLOCK | 1 | |
| 1956294-A | BK117 TRANSMISSION FILTER BLOCK TEST PLUG, TOOL #39 | 1 | |
| 1J12414 | Block, Holding | 1 | |
| 1M14038 | BLOCK, RETAINING | 1 | |
| 1R18738 | block, setting (stage 7) | 1 | |
| 1R18739 | block, setting (stage 8) | 1 | |
| 1R18740 | block, setting (stage 9) | 1 | |
| 1R18741 | block, setting (stages 10 & 11) | 1 | |
| 1X56137056 | BLOCKING LEVER | 1 | |
| 2 – 164 – 501 | REFERENCE BLOCK | 4 | |
| 2-069-69-0002 | PROBE & CALIBRATION BLOCK SET | 1 | |
| 2-164- 501 | CALIBRATION BLOCK (STEEL) | 4 | |
| 2-164-501 | AIRBUS EDDY CURRENT CALIBRATION BLOCK 4340 STEEL, 51-10-00-250-801 and 51-63-991-001 PAGE 601 FIGURE 601. Includes Test Report and Certificate of Conformance. | 4 | |
| 2-164-55 | CALIBRATION BLOCK | 1 | |
| 2-164-551 | REFERENCE STANDARD BLOCK | 2 | |
| 2-164-551-2024T3 | CALIBRATION BLOCK | 1 | |
| 2-2607948 | HOLDING BLOCK | 1 | |
| 2-2609502-1 | HOLDING BLOCK | 1 | |
| 2-2609932-1 | HOLDING BLOCK | 1 | |
| 2-2615480 | HOLDING BLOCK | 1 | |
| 2-2616849 | HOLDING BLOCK | 1 | |
| 2-835-01-9301 | AIRBUS CALIBRATION BLOCK, STAINLESS STEEL, 0.2mm, 0.5mm, 1mm EDM SLOTS. PART 6: 51-63-01 page 601 figure 601 | 2 | |
| 2-835-01-9330 | AIRBUS CALIBRATION BLOCK, 6AL-4v TITANIUM, 0.2mm, 0.5mm, 1mm EDM SLOTS. PART 6: 51-63-01 page 601 figure 601 | 2 | |
| 2-835-01-9331 | AIRBUS CALIBRATION BLOCK. MATERIAL: 304 Stainless Steel, 0.2mm, 0.5mm, 1mm EDM SLOTS. PART 6: 51-63-01 page 601 figure 601 Includes Test Report and Certificate of Conformance. | 1 | |
| 2-835-07-6901 | EDDY CURRENT TEST BLOCK | 2 | |
| 2-887-01- 9313S | SPLIT CONICAL CALIBRATION BLOCK | 6 | |
| 2-887-01-9313S | CALIBRATION BLOCK.. | 6 | |
| 2-887-01-9314S | SPLIT CONICAL CALIBRATION BLOCK | 5 | |
| 2-887-01-93155 | SPLIT CONICAL CALIBRATION BLOCK | 1 | |
| 2-887-01-9315S | SPLIT CONICAL CALIBRATION BLOCK | 4 | |
| 2-887-01-9316S | CALIBRATION BLOCK | 3 | |
| 2-887-01-9319S | CALIBRATION BLOCK | 3 | |
| 2-887-01-9321S | CALIBRATION BLOCK | 3 | |
| 2-887-01-9323S | CALIBRATION BLOCK | 3 | |
| 2-887-01-9325S | CALIBRATION BLOCK | 3 | |
| 2-887-019313S | SPLIT CONICAL CALIBRATION BLOCK | 6 | |
| 2.164-551 | CALIBRATION BLOCK | 2 | |
| 2.887.01-9313-S | CALIBRATION BLOCKS FOR ROTOTEST | 6 | |
| 2.887.01-9314-S | CALIBRATION BLOCKS FOR ROTOTEST | 5 | |
| 2.887.01-9315-S | CALIBRATION BLOCKS FOR ROTOTEST | 4 | |
| 2.887.01-9316-S | CALIBRATION BLOCKS FOR ROTOTEST | 3 | |
| 20-3261 | Trimos 20-3261 Gauge Block Calibration Module QM-BLOCK | 1 | |
| 2000-250-02 | CALIB. STAND BLOCK AND HDWE | 1 | |
| 2024T3-40X10X150 | ALUMINUN BLOCK 40MM WIDE X 10MM THICK X 5.90MM LONG | 1 | |
| 2024T3-40x10x150 | Aluminun Block 40mm wide x 10mm thick x 5.90mm Long | 1 | |
| 202624-2 | PION BLOCK | 1 | |
| 2067/7075-T6 | 5 STEP CALIBRAITION BLOCK | 1 | |
| 2108-550 | WOODEN BLOCK FFK9941A2 | 2 | |
| 21C7082P10 | TRUNNION BLOCK | 1 | |
| 21C7082P11 | TRUNNION BLOCK | 1 | |
| 21C7383G01 | OIL FILTER B/P SENSOR TEST BLOCK | 1 | |
| 2211M | 5-STEP CALIBRATION BLOCK, 304 STAINLESS STEEL | 1 | |
| 2213M | THICKNESS CALIBRATION BLOCKS | 1 | |
| 2214M | TEST BLOCK. 5-STEP. 1018 CARBON STEEL. METRIC UNIT 2.5 MM, 5.0 MM, 7.5 MM, 10.0 MM, 12.5 MM PRECISIO | 1 | |
| 2218M | CALIBRATION BLOCK (1MM - 15MM) | 1 | |
| 23001 | Moore & Wright Vee Block Clamp & Screw for No.230 | 1 | |
| 23101 | Moore & Wright Vee Block Clamp & Screw For No.231 | 1 | |
| 230210 | SECURING BLOCK | 1 | |
| 240300LAT1-101 | HOLDING BLOCK | 1 | |
| 2467A0100-01 | INPECTION BLOCK | 1 | |
| 25229 | AIR CAP INSTALLING BLOCK | 1 | |
| 28937 | Norbar 28937 - 12 PCE 1/4" HEX BIT SET WITH PLASTIC BLOCK | 1 | |
| 235507. | BLOCK REF. STANDARD | 1 | |
| 270017 | TEE BLOCK AND GAGE ASSEMBLY | 7 | |
| 2561506 | Indicator & Setting Block | 1 | |
| 2561507 | Setting Indicator Block | 1 | |
| 23058451 | Gage Block – Dimension “K” Measurement | 1 | |
| 23058453 | Gage – Block, Dim “J” Measurement | 1 | |
| 260077-01 | SENSOR BLOCK REMOVAL TOOL | 1 | |
| 26014081 | HOLD DOWN BLOCK | 2 | |
| 201173220 | BLOCK # BLOCK-TRANSFER | 1 | |
| 201173700 | BLOCK # TRANSFER BLOCK | 1 | |
| 201676213 | BLOCK # TRANSFER BLOCK SUBAY, MLG | 1 | |
| 26014081-101 | HOLD DOWN BLOCK | 1 | |
| 269A9241 | Punch & Block 269A5050-44 Bearing Installation | 1 | |
| 269A9297 | Tool Block Landing Gear Damper Strut Assembly | 1 | |
| 269T9272 | "RIGGING BLOCK MAIN ROTOR | 1 | |
| 269T9272-001 | RIGGING BLOCK MAIN ROTOR | 1 | |
| 269T9272-005 | Rigging Block Assembly | 1 | |
| 269T9272-7 | Main Rotor Rigging Block W/ Shim | 1 | |
| 27-1-3897A | PLATE ADJUSTEMENT BRUSH BLOCK AND PICK-UP PROBE 27.1.3897.01 | 1 | |
| 27-1-4339 | RETAINER BRUSH BLOCK | 1 | |
| 27-1-4339A | PROP DEICE BRUSH BLOCK RETAINER | 3 | |
| 27-95031-001 | Calibration Block, Fairchild SA226-32-065:PG8 FIG1 | 2 | |
| 27.1-4339 | RETAINER-BRUSH BLOCK.PROPELLER ANTI-ICING F50 | 1 | |
| 27.1-4339A | RETAINER-BRUSH BLOCK.PROPELLER ANTI-ICING F50 | 3 | |
| 290A28 | FERROUS NDT TEST BLOCK | 1 | |
| 296327-1 | DRIVEN COPRESSOR LINKAGE GAGE BLOCK | 1 | |
| 29A012 | Probe guide sprung with v-block attachme | 1 | |
| 29A028 | REFERENCE BLOCK,FERROUS | 4 | |
| 29A029 | A318-319-320-321 Calibration Block | 5 | |
| 29A029-2024T3 | ALUMININUM BLOCK 2024 T3 | 1 | |
| 29A029-7075 T6 | ALUMININUM BLOCK 7075 T6 | 1 | |
| 29A029-7075T6 | ALUMININUM BLOCK 7075 T6 | 1 | |
| 29A029SH | REFERENCE BLOCK ALUMINUM | 1 | |
| 29A032 | CALIBRATION BLOCK | 3 | |
| 29A047 | A318-319-320-321 Calibration Block | 5 | |
| 29A049 | AUSTENITIC STEEL CALIBRATION BLOCK | 2 | |
| 29A0491 | HFEC EDDY CURRENT BLOCK STAINLESS | 1 | |
| 29A120 | REFERENCE BLOCK | 2 | |
| 2A1592 | NOZZLE BLOCK | 1 | |
| 2C15618 | FIXTURE, BOND-BLOCKER DOOR HINGES | 1 | |
| 2C15618G01 | FIXTURE, BOND-BLOCKER DOOR HINGES | 1 | |
| 2C15619 | FIXTURE, BOND-BLOCKER DOOR HINGES | 1 | |
| 2C15619G01 | FIXTURE, BOND-BLOCKER DOOR HINGES | 1 | |
| 2C6646 -LMT | GAGE BLOCK, COMPRESSOR STATOR VANE ACTUATION ARM | 1 | |
| 2C6646G01 | GAGE BLOCK, COMP STATOR VANE STG 4 | 1 | |
| 2F10368 | #5 Pressure Block Off Plate - A1 only | 1 | |
| 2MIT100T3480-503 | PIN STORAGE BLOCK | 1 | |
| 2MIT65B80174-1 | TENSION BLOCK ASSY | 1 | |
| 2MIT65B80174-7 | TRUNNION BLOCK ASSY | 1 | |
| 2MIT65B80174-8 | TRUNNION BLOCK | 1 | |
| 2MIT65B90114 | BLOCKAGE DISK - BLEED DUCT, 8TH-STAGE, JT9D ENGINE | 1 | |
| 2MIT65B98000 | SECURING CLIP SET - BLOCKER DOOR DEACTIVATED TURBINE THRUST REVERSER | 1 | |
| 3-NOTCHEC | 6AL-4V TITANIUM ALLOY CALIB. BLOCK | 1 | |
| 30-4505203-00 | TRANSFER BLOCK SUB ASSY LH | 1 | |
| 30-4506179-00 | BLOCK # BLOCK SUBAY TRANSFER, RH | 1 | |
| 30-4506203-00 | TRANSFER BLOCK SUB ASSY RH | 1 | |
| 30-902-6231 | Sylvac 30-902-6231 Raising Blocks for External Jaws | 1 | |
| 314STD-53-0012 REV. 01 | FUSELAGE REPLACEMENT OF THE FRONT AND REAR INITIATIOR BLOCK SUPPORTS | 1 | |
| 315A2535-3 | BLOCKER BATWING | 1 | |
| 3170024-1 | BLOCK PLATES, ENGINE BLEED AIR | 1 | |
| 32-40-14-03 | GO, NO GO GAGE BLOCK | 1 | |
| 324520 | CHILL BLOCK AND PROTECTOR TOOL | 1 | |
| 330A93-2024-20 | BLOCK,BEARING FIXTURE | 1 | |
| 332A33-1191-20 | BLOCK, ANTI-FRETTING | 1 | |
| 332A93-3692-00 | TOOLING,SEAL MAINTENANCE (ICO 13-30-30-02) BLOCK | 1 | |
| 332A93309010 | 60 SETTING BLOCK, FWD RH | 1 | |
| 332A93309011 | 70 SETTING BLOCK, FWD LH | 1 | |
| 332A93‐3090‐12 | 80 SETTING BLOCK, REAR RH | 1 | |
| 332A93‐3090‐13 | 90 SETTING BLOCK, REAR LH | 1 | |
| 332A94-3190-00 | TOOL, BLOCKING PITCH ROD | 1 | |
| 332A94319000 | TOOL, BLOCKING PITCH ROD | 1 | |
| 332A95-5290-00 | TOOLING ASSEMBLY,IGB (ICO 13-30-50-01) ASSEMBLY BLOCK | 1 | |
| 335 | Calibration Block | 10 | |
| 33A136 | CONDUCTIVITY DUAL REFERENCE BLOCK | 1 | |
| 33A150 | TEST BLOCK, ROTATING PROBE | 1 | |
| 3402789-1 | BLOCK SET, TENSION REGULATOR | 1 | |
| 3402789-29 | TENSION REGULATOR BLOCK (TWO REQUIRED) (ALTERNATE FOR CABLE BLOCK ABOVE) | 1 | |
| 3404025-1 | PROPELLER BRUSH BLOCK ADJUSTMENT KIT | 1 | |
| 350A93-3203-20 | Block - MGB & TRGB Fitting | 2 | |
| 350A93-3206-20 | Block- modified for new seal | 1 | |
| 350A93-32O3-20 | SEAL / BUSH INSTL BLOCK | 2 | |
| 350A93-3712-00 | ASSEMBLY BLOCK, ROTATING STAR | 2 | |
| 350A93-3712-00/PHP | BLOCK BEARING ADJUST ON ROT. START | 1 | |
| 350A93-3713-00 | ASSEMBLY BLOCK, NON-ROTATING STAR/ROTATING STAR | 2 | |
| 350A93-3713-00/PHP | BLOCK ASSY ADJUSTMENT | 1 | |
| 350A93-3800-20 | REMOVAL / INSTALLATION - LAMINATE SUSPENSION BLOCKS - BIDIRECTIONAL SUSPENSION | 2 | |
| 350A93-3802-21 | REMOVAL / INSTALLATION - LAMINATE SUSPENSION BLOCKS - BIDIRECTIONAL SUSPENSION | 2 | |
| 350A93-3804-00 | REMOVAL / INSTALLATION - LAMINATE SUSPENSION BLOCKS - BIDIRECTIONAL SUSPENSION | 2 | |
| 350A93-3806-00 | REMOVAL / INSTALLATION - LAMINATE SUSPENSION BLOCKS - BIDIRECTIONAL SUSPENSION | 2 | |
| 350A93-5201-20 | SEAL/ INSTALL BLOCK GUIDE | 1 | |
| 350A93320320 | BLOCK, MGB AND TGB FITTING | 2 | |
| 350A93371200 | BLOCK BEARING ADJUST ON ROT. START | 2 | |
| 350A93371300 | BLOCK ASSY ADJUSTMENT | 2 | |
| 350A94-5201-20/PHP | SEAL/ INSTALL BLOCK GUIDE | 1 | |
| 351-3000-28GSE | L6/L8 LATCH HANDLE JAM BLOCKS | 1 | |
| 360A93-3212-00 | SEAL FITTING DRIFT AND BLOCK | 1 | |
| 360A93-3226-00 | BLOCK SEAL MOUNT FA | 1 | |
| 360A93321200 | SEAL FITTING DRIFT AND BLOCK | 1 | |
| 360A93322600 | DRIFT/BLOCK SEAL MOUNT FAN POWER SUPP | 1 | |
| 365A93-3104-21 | FITTING BLOCK SHAFT | 1 | |
| 365A93310421 | FITTING BLOCK,SHAFT BEARING | 1 | |
| 365A93311200 | BEARING ASSEMBLY BLOCK ON ROTATING S | 1 | |
| 365A93314300 | BLOCK ASSY,STOP HIGH POSITION | 1 | |
| 369029822-3 | PITCH CONTROL ASSY HOLDING BLOCK | 1 | |
| 369D29822-3 | TAIL ROTOR SWASH PLATE HOLDING BLOCK | 1 | |
| 369H9928 | TAB BENDER WITH PLASTIC BLOCK | 1 | |
| 369R1820-PHF1 | HOLDING BLOCK, PITCH CONTROL ASSEMBLY | 1 | |
| 38-T5-3 | T5 TENSIOMETER RISER BLOCK - SIZE 3 - USATCO | 1 | |
| 38-T5-3A | T5 TENSIOMETER RISER BLOCK - SIZE 3A - USATCO | 1 | |
| 382-57-74 82-688 | HERCULES CALIBRATION BLOCK 382-57-74 82-688 | 1 | |
| 3A3876-3 | ASSEMBLY, NOZZLE BLOCK (INCLUDES ORFICE DISC P/N 3A3879-4646 | 1 | |
| 3C4340G01 | BLOCK SET R/I HPCS VANES & LINERS | 1 | |
| 3G0705G00411 | LANDING GEAR BLOCKING SYSTEM | 1 | |
| 3G1005G00732 | TOOL, T/R BLADES FLAPPING BLOCK (HD-03-00) | 1 | |
| 3G1005G01732 | TOOL, T/R BLADES FLAPPING BLOCK (HD-03-00) | 1 | |
| 3G6220A05353 | ANTI-ROTATION BLOCK | 1 | |
| 3NOTCHEC.IA | BLOCK, TEST, 3 NOTCH, 7075-T6 ALUMI | 1 | |
| 3NOTCHEC.IT | 6AL-4V TITANIUM ALLOY CALIB. BLOCK | 1 | |
| 4/A023 | CONDUCTIVITY BLOCK | 1 | |
| 402-869.60 | 402-869.60;Block Code Based OAM - Module Option | 1 | |
| 402506 | Blocking | 1 | |
| 402508-13 | AFT FUSELAGE BLOCKING SUPPORT | 1 | |
| 404601 | INSTRUMENT ISA COAX BLOCK WITH RETRA | 2 | |
| 40533345ST | REGULATOR TEST BLOCK (DIGITAL) B/E AEROSPACE SYSTEMS (COLLINS) | 1 | |
| 4091AS0176-1 | PIN BLOCK ASSY / MFC: 30003 | 1 | |
| 42-27-04-021 | VEE BLOCK OF THE ABOVE MENTIONED SPECIAL PRESSING TOOL | 1 | |
| 420207 | HOLDING BLOCK | 2 | |
| 423460TF1 | INLET CHECK VALVE TEST BLOCK | 1 | |
| 439006019 | BLOCKING HOSE | 1 | |
| 440-40994 | SPRING ASSEMBLY PUMP BLOCK RELIEF VALVE | 1 | |
| 444-65069-000 | CONNECTING BLOCK | 1 | |
| 45187717 | PULLER-BLOCKING VALVE SEAT (EATON AEROSPACE) | 1 | |
| 460001775 | HOLDING BLOCKS | 1 | |
| 460001775-1 | HOLDING BLOCKS | 1 | |
| 460001775-2 | HOLDING BLOCKS | 1 | |
| 460001775-3 | HOLDING BLOCKS | 1 | |
| 460001775-4 | HOLDING BLOCKS | 1 | |
| 460001775-5 | HOLDING BLOCK | 6 | |
| 460001775-5PM | HOLDING BLOCK | 1 | |
| 460001775-6 | HOLDING BLOCKS | 1 | |
| 460001775-7 | HOLDING BLOCKS | 1 | |
| 460001775-8 | HOLDING BLOCKS | 1 | |
| 460001775/5 | Holding Block | 6 | |
| 460002090 | HOLDING BLOCKS | 1 | |
| 460002090-20 | HOLDING BLOCK | 4 | |
| 460002090-20PM | HOLDING BLOCK | 1 | |
| 460002090/20 | Holding Block | 4 | |
| 460004494-1 | HOLDING BLOCK | 1 | |
| 460005832-49 | SEATING BLOCK | 1 | |
| 50623 | HAMMERING BLOCK | 1 | |
| 553444 | Henkel 98272 LOCTITE White 14 Gauge 1-14 Helical Thread & UV Light Block Additive Polyethylene Tapered Tip Dispense Needle - Pack of 50 | 1 | |
| 46000429 | SETTING BLOCK MLG FORX SENSORS | 1 | |
| 460004492 | HOLDING BLOCK | 1 | |
| 460004494 | HOLDING BLOCK | 1 | |
| 460005835 | GROUND BLOCK SLEEVE | 45 | |
| 460005881 | Holding Blocks | 1 | |
| 460005881PM | HOLDING BLOCKS | 1 | |
| 460005882 | Holding Blocks | 1 | |
| 460005882PM | HOLDING BLOCKS | 1 | |
| 460006235 | SETTING BLOCK | 1 | |
| 460006236 | SETTING BLOCK | 1 | |
| 460006406 | HOLDING BLOCKS | 7 | |
| 460006428 | BLOCK - SETTING | 11 | |
| 460006429 | BLOCK - SETTING | 12 | |
| 460006431 | TEST BLOCK - MLG A320NEO | 9 | |
| 460006464 | HOLDING BLOCK | 1 | |
| 460006543 | FLUSHING BLOCK | 1 | |
| 460006560 | SETTING BLOCK | 1 | |
| 460006570 | HOLDING BLOCKS | 1 | |
| 460006572 | HOLDING BLOCKS | 1 | |
| 460006579 | HOLDING BLOCKS | 1 | |
| 460006597 | SETTING BLOCK | 1 | |
| 460006598 | SETTING BLOCK | 1 | |
| 460006642 | SETTING BLOCK | 1 | |
| 460007046 | LOCATION BLOCK ASSY R.H. | 1 | |
| 460007047 | LOCATION BLOCK ASSY L.H. | 1 | |
| 460007128 | HOLDING BLOCKS | 1 | |
| 460007150 | HOLDING BLOCK | 1 | |
| 460007330 | LOCATION BLOCK | 1 | |
| 460007331 | LOCATION BLOCK | 2 | |
| 4600067047 | LOCATION BLOCK ASSY | 1 | |
| 469-10-5 | CRANK SHAFT GAUGE CODE : 469- 10-5. RANGE: 60-500MM, WITH 0- 3MM/0.01MM DIAL GAUGE, 1 BALANCE WEIGHT BLOCK, 3 GAUGING POINTS AND 5 EXTENSION RODS MAKE : ASIMETO | 1 | |
| 5 Way Air Hose Manifold Block | 5 Way Air Hose Manifold Block | 1 | |
| 5006005-TT | HOUSING TEST BLOCK | 1 | |
| 500kg | Chain Block 3 metre (spare) | 1 | |
| 513.27.12.056 | BLOCK ASSEMBLY, RIGGING | 1 | |
| 513.27.12.056 | RIGGING BLOCK | 1 | |
| 513.27.12.075 | BLOCK ASSY RIGGING | 1 | |
| 513.27.12.075) | RIGGING BLOCK ASSY | 1 | |
| 513.32.12.057 | WEIGHT ON WHEELS PROX SWITCH ADJUSTMENT BLOCK | 1 | |
| 516-302-11 | Mitutoyo 516-302-11 / 81-piece Ceramic Gauge Block Set, Inch, Grade 0 | 1 | |
| 516-303-11 | Mitutoyo 516-303-11 / 81-piece Ceramic Gauge Block Set, Inch, Grade 1 | 1 | |
| 516-304-11 | Mitutoyo 516-304-11 / 81-piece Ceramic Gauge Block Set, Inch, Grade 2 | 1 | |
| 516-402-26 | RECTANGULAR GAGE BLOCK ACCESSORIES | 1 | |
| 516-650E | Mitutoyo 516-650E / Maintenance Kit for Gauge Blocks | 1 | |
| 516-704-10 | PLANE GAGE BLOCKS -GRADE 2; -8 BLOCKS PER SET | 1 | |
| 516-804-12 | Mitutoyo 516-804-12 / .1" Carbide Wear Blocks, Inch, Grade 1 (2pcs) | 1 | |
| 516-805-12 | Mitutoyo 516-805-12 / .1" Carbide Wear Blocks, Inch, Grade 0 (2pcs) | 1 | |
| 516-808-12 | Mitutoyo 516-808-12 / .05" Carbide Wear Blocks, Inch, Grade 1 (2pcs) | 1 | |
| 516-809-12 | Mitutoyo 516-809-12 / .05" Carbide Wear Blocks, Inch, Grade 0 (2pcs) | 1 | |
| 516-834-12 | Mitutoyo 516-834-12 / .1" Ceramic Wear Blocks, Inch, Grade 0 (2pcs) | 1 | |
| 516-835-12 | Mitutoyo 516-835-12 / .10" Ceramic Wear Blocks, Inch, Grade 1 (2pcs) | 1 | |
| 516-836-12 | Mitutoyo 516-836-12 / .05" Ceramic Wear Blocks, Inch, Grade 0 (2pcs) | 1 | |
| 516-837-12 | Mitutoyo 516-837-12 / .05" Ceramic Wear Blocks, Inch, Grade 1 (2pcs) | 1 | |
| 516-903-11 | Mitutoyo 516-903-11 / 81-piece Steel Gauge Block Set, Inch, Grade 1 | 1 | |
| 516-904-11 | Mitutoyo 516-904-11 / 81-piece Steel Gauge Block Set, Inch, Grade 2 | 1 | |
| 516-911-11 | Mitutoyo 516-911-11 / 49-piece Steel Gauge Block Set, Inch, Grade 1 | 2 | |
| 516-911-11 49 | PIECE STEEL GAUGE BLOCK SET INCH* | 1 | |
| 516-912-11 | Mitutoyo 516-912-11 / 49-piece Steel Gauge Block Set, Inch, Grade 2 | 1 | |
| 516-944-11 | GAGE BLOCK SET;|GAUGE BLOCKS STEEL,MEASURING,GRADE 2; | 1 | |
| 51728T1 | LAPPING BLOCK | 1 | |
| 52347A0123-02 | INSPECTION BLOCK | 1 | |
| 52359A0001-01 | CONTROL BLOCK | 1 | |
| 52585A0000-01 | CLEANING TEST BLOCK | 1 | |
| 53-022-100 | 20-INCH GAGE BLOCK, COMPARATOR, RESOLUTION: 0.1 Μ IN. | 1 | |
| 53-10-110A | CALIBRATION BLOCK | 2 | |
| 53-20-140A1 | NDT REFERENCE BLOCK | 1 | |
| 53-20-183-1 | 146 NDT BLOCK | 1 | |
| 53-20-183-2 | 146 NDT BLOCK | 1 | |
| 53-20-183/2 | 146 NDT BLOCK | 1 | |
| 53-3003 | Swivel Dimpling Combo With Punch & Die Block (Description: .401 Shank Female Swivel Holder) (Rivet diameter: 3/32") (Add to cart: Add To Cart) (Description: .401 Shank Female Swivel Holder) (Rivet diameter: 1/8") (Add to cart: Add To Cart) (Description: . | 1 | |
| 53-3004 | Swivel Dimpling Combo With Punch & Die Block (Description: .401 Shank Female Swivel Holder) (Rivet diameter: 3/32") (Add to cart: Add To Cart) (Description: .401 Shank Female Swivel Holder) (Rivet diameter: 1/8") (Add to cart: Add To Cart) (Description: . | 1 | |
| 53-3005 | Swivel Dimpling Combo With Punch & Die Block (Description: .401 Shank Female Swivel Holder) (Rivet diameter: 3/32") (Add to cart: Add To Cart) (Description: .401 Shank Female Swivel Holder) (Rivet diameter: 1/8") (Add to cart: Add To Cart) (Description: . | 1 | |
| 53-3006 | Swivel Dimpling Combo With Punch & Die Block (Description: .401 Shank Female Swivel Holder) (Rivet diameter: 3/32") (Add to cart: Add To Cart) (Description: .401 Shank Female Swivel Holder) (Rivet diameter: 1/8") (Add to cart: Add To Cart) (Description: . | 1 | |
| 53-3013 | Swivel Dimpling Combo With Punch & Die Block (Description: .401 Shank Female Swivel Holder) (Rivet diameter: 3/32") (Add to cart: Add To Cart) (Description: .401 Shank Female Swivel Holder) (Rivet diameter: 1/8") (Add to cart: Add To Cart) (Description: . | 1 | |
| 53-3014 | Swivel Dimpling Combo With Punch & Die Block (Description: .401 Shank Female Swivel Holder) (Rivet diameter: 3/32") (Add to cart: Add To Cart) (Description: .401 Shank Female Swivel Holder) (Rivet diameter: 1/8") (Add to cart: Add To Cart) (Description: . | 1 | |
| 53-3015 | Swivel Dimpling Combo With Punch & Die Block (Description: .401 Shank Female Swivel Holder) (Rivet diameter: 3/32") (Add to cart: Add To Cart) (Description: .401 Shank Female Swivel Holder) (Rivet diameter: 1/8") (Add to cart: Add To Cart) (Description: . | 1 | |
| 53-3016 | Swivel Dimpling Combo With Punch & Die Block (Description: .401 Shank Female Swivel Holder) (Rivet diameter: 3/32") (Add to cart: Add To Cart) (Description: .401 Shank Female Swivel Holder) (Rivet diameter: 1/8") (Add to cart: Add To Cart) (Description: . | 1 | |
| 530G12401-1 | CALIBRATION BLOCK KIT FOR CRANKSHAFT INSPECTION | 1 | |
| 530G12406-1-3 | CALIBRATION STANDARDS-STEEL BLOCKS,SET OF 3 | 1 | |
| 5335-016 | DRILL BLOCK, FORCETEC RETAINER REMVOAL | 1 | |
| 53D22020 | JACK, HYDRAULIC BLOCK, 5-TON | 1 | |
| 5513050-31 | BLOCK, CESSNA CITATION | 1 | |
| 5513050-32 | BLOCK, CESSNA CITATION | 1 | |
| 56203S0006 | BLOCKING FIXTURE | 1 | |
| 56203S0007 | BLOCKING FIXTURE | 1 | |
| 56507S0003 | HOLDING BLOCK | 1 | |
| 56932-T4 | Staking Set Block | 1 | |
| 56932T4 | STAKING SET BLOCK | 1 | |
| 57-10-102-2 | BAE146 NDT CALIBRATION BLOCK | 1 | |
| 57-10-102-4 | BAE146 NDT CALIBRATION BLOCK | 1 | |
| 570626 | Henkel 98273 LOCTITE White 14 Gauge 1-14 Helical Thread & UV Light Block Additive Polyethylene Tapered Tip Dispense Needle - Pack of 1000 | 1 | |
| 57925T4 | Retainer Set Block | 1 | |
| 57949A0200-01 | Holding Block | 1 | |
| 57955-T1 | SET BLOCKING STAKING | 1 | |
| 57955T1 | Staking Set Block | 1 | |
| 57984A0000-01 | EDGING BLOCK | 1 | |
| 57984A0000-01PM | EDGING BLOCK | 1 | |
| 57A4248 | TEST BLOCK,ULTRASON NSN:6635-00-022-0367 | 1 | |
| 5908954-TB | SWITCH INDICATOR TEST BLOCK | 1 | |
| 5909073-TB | SENSOR TEMPERATURE TEST BLOCK | 1 | |
| 59108 | NDT CALİBREASYON BLOCK (K1) | 1 | |
| 5980-ER-1 | TFT Pinch Block | 1 | |
| 599-921-18 | ANGLE BLOCK SET | 1 | |
| 5STEPA.MA | 5-STEP BLOCK, METRIC 5A, W/ HARDWOOD CASE (NDT) | 1 | |
| 601644 | Mitutoyo 601644 Ceraston Gauge Block Maintenance 150 x 50 x 20 mm | 1 | |
| 601645 | Mitutoyo 601645 Ceraston Gauge Block Maintenance 100 x 25 x 12 mm | 1 | |
| 6061 AL BLOCK | Aluminum Block 110mm(3.937") x 18mm(7.09") x 15mm(.591") Block. Material: 6061-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 610A180-B | WHEEL BLOCK FOR ENGINE TEST RUN | 1 | |
| 62102FE174-001 | ADJUSTING U BLOCK | 1 | |
| 62201-8413 | Omnigrid Daughter Card Press In Block | 1 | |
| 62202-0212 | Backplane Alignment Block | 1 | |
| 636-1000-32GSE | PW & CFM BLOCKING DEVICE - ENGINE MOUNT AFT | 6 | |
| 636-1000_32GSE | BLOCKING DEVICE-ENGINE MOUNT | 6 | |
| 63825-0200 | Hand Crimp Tool For Cluster Block Terminal | 1 | |
| 640-020-032 | WAYGATE KRAUTKRAMER 3 HOLE CONDUCTIVITY REFERENCE BLOCK SAMPLE HOLDER | 1 | |
| 640-025-005 | GEIT ROTARY DEMO KIT WITH (2) PROBES AND TEST BLOCK | 1 | |
| 640-025-007 | GEIT ROTARY TAPERED STANDARD BLOCK KIT ALUMINUM | 1 | |
| 640-025-010 | EC SPLIT CONICAL CALIB. BLOCK - TITANIUM | 1 | |
| 640-050-000 | TEST BLOCK, 3 NOTCH, WELDSCAN, 4340 ST | 1 | |
| 640-050-002 | CALIBRATION BLOCK | 2 | |
| 64526-1 | CYLINDER HOLDING BLOCK | 1 | |
| 64526-2 | BLOCK, CYLINDER HOLDING | 1 | |
| 64545 | BLOCK, VEE - CHECK CRANKSHAFT RUN / RUNOUT BLOCK SET ADQUIRIR | 1 | |
| 652-8271-001 | ALIGNMENT BLOCK | 1 | |
| 652A010-A | BOARDING GATE SLIDE PACK COUNTERWEIGHT BLOCK | 1 | |
| 652A010-B | BOARDING GATE SLIDE PACK COUNTERWEIGHT BLOCK | 1 | |
| 652A020-B | SERVICE DOOR SLIDE PACK COUNTERWEIGHT BLOCK | 1 | |
| 652A030-A | EMERGENCY DOOR SLIDE PACK COUNTERWEIGHT BLOCK | 1 | |
| 654478-1 | TCM REFERENCE BLOCKS | 1 | |
| 654483-1 | TCM REFERENCE BLOCKS | 1 | |
| 654485-1 | TCM REFERENCE BLOCKS | 1 | |
| 6583102-1 | CALIBRATION BLOCK | 1 | |
| 6635-01-148-5477 | ULTRASONIC INSPECTION BLOCK | 1 | |
| 67380-1 | PACKING TOOL WEDGE BLOCK | 1 | |
| 67432 | ALMEN HOLDING BLOCK | 1 | |
| 654478 | TCM REFERENCE BLOCK | 1 | |
| 67906-101 | VOLUME BLOCK AND COVER ASSEMBLY, SURVIVAL KIT | 1 | |
| 68SHIMBLOCK | BLOCK - LOADING, 1/8 INCH THICK, 3 INCH BY 3 INCH WOOD OR FIBERGLASS BLOCK WITH PAD TO PREVENT DAMAGE TO THE SKIN | 1 | |
| 69002-R815505 | WIRE LEAD BLOCK POSITIONING TOOL | 1 | |
| 69002-R815505-0000 | WIRE LEAD BLOCK POSITIONING TOOL | 1 | |
| 69754-101 | VOLUME BLOCK AND COVER ASSEMBLY, SURVIVAL KIT | 1 | |
| 6F6711G00131 | BLOCKING TOOL TORSION TUBE | 1 | |
| 6MIT65B00163-25 | Cushion block | 1 | |
| 70198-101 | UNIVERSAL ASPIRATOR SPACER BLOCK | 1 | |
| 70198-103 | UNIVERSAL ASPIRATOR SPACER BLOCK | 1 | |
| 718 | ULTRASONIC CALIBRATION BLOCK FOR INCONEL 718 | 1 | |
| 7075 | Ultrasonic Testing equip.Test Block T-MIKE E | 2 | |
| 7374 | EDDY CURRENT BOLT HOLE STANDARD BLOCK (7075-T6 ALUMINUM) | 1 | |
| 70521 | THICKNESS CALIBRATION BLOCK, 05 STEPS (0.100 / 0.200 / 0.300 / 0.400 AND 0.500 INCH) | 1 | |
| 74205 | TUNGSTEN RIVET BLOCK | 1 | |
| 75130 | CONTINUOUS METHOD TEST BLOCK, | 1 | |
| 76908 | 76908 SLEEVE BLOCK CENTERING | 11 | |
| 705451 | RINSING BLOCK | 1 | |
| 7075-3-0-300 | CALIBRATION BLOCK | 1 | |
| 7075-5-0-012 | CALIBRATION BLOCK | 1 | |
| 7075-5-0-025 | CALIBRATION BLOCK | 1 | |
| 7075-5-0-050 | CALIBRATION BLOCK | 1 | |
| 7075-5-0-075 | CALIBRATION BLOCK | 1 | |
| 7075-5-0-150 | CALIBRATION BLOCK | 1 | |
| 7075-5-0-300 | CALIBRATION BLOCK | 1 | |
| 7075-5-0-600 | CALIBRATION BLOCK | 1 | |
| 7075-8-0-300 | CALIBRATION BLOCK | 1 | |
| 7075-8-0-600 | CALIBRATION BLOCK | 1 | |
| 713D1701 | PUMP BLOCK FOR 60 TON JACK | 1 | |
| 7175T7351 | NDT CALIBRATION BLOCK - 7175T7351 - RANGE: 2MM | 1 | |
| 7175T7351 - RANGE 1MM TO 25MM | THICKNESS CALIBRATION BLOCK | 1 | |
| 7175T7351 - RANGE: 2MM TO 12.5MM | ULTRASONIC THICKNESS GAUGE CALIBRATION BLOCK | 1 | |
| 718-1520-006 | CARD, PCMCIA OPS SOFTWARE CMU BLOCK 0.82 P/N 718-1520-006 | 2 | |
| 718-1520-020 | CARD, PCMCIA OPS SOFTWARE CMU BLOCK 1.29 P/N 718-1520-020 | 2 | |
| 718-1523-002 | CARD, PCMCIA HGI DATABASE CMU BLOCK 0.82 P/N 718-1523-002 | 2 | |
| 718-1524-002 | CARD, PCMCIA AMI DATABASE CMU BLOCK 0.82 P/N 718-1524-002 | 2 | |
| 726575 | MACHINING BLOCK TOOL | 1 | |
| 726856 | BLOCKING VALVE INSTALLATION CONE | 1 | |
| 727028 | BLOCKING VALVE | 1 | |
| 727029 | BLOCKING VALVE | 1 | |
| 753695 | GOVERNOR FLUSHING BLOCK | 1 | |
| 770037 | REPLACEMENT TERMINAL BLOCK FOR 724 WORKSTATION MONITOR (PACK OF 5) | 1 | |
| 6723080 | TOOL SETTING BLOCK | 1 | |
| 6723107 | TOOL SETTING BLOCK | 1 | |
| 6723109 | TOOL SETTING BLOCK | 1 | |
| 6723110 | TOOL SETTING BLOCK | 1 | |
| 6743423 | TOOL SETTING BLOCK | 1 | |
| 6796902 | GAGE BLOCK UNIT,COMPRESSOR VANES | 1 | |
| 6895541 | Locating Blocks | 1 | |
| 7300486 | CONTACT BLOCK, 1NC/1 NO.(AIR START MODEL: ASU-600-150-CUP) | 1 | |
| 7901267 | GAGE BLOCKS, RANGE: 0.050 TO 20 IN. ACCURACY: SEE TEST REPORT | 1 | |
| 83720088 | CLAMPING BLOCK | 1 | |
| 83720089 | HOLDING BLOCK | 1 | |
| 83720108 | HOLDING BLOCK | 1 | |
| 83720118 | Clamping Block | 1 | |
| 83720119 | Holding Block | 1 | |
| 697057233 | BRUSH BLOCK AND HAR | 1 | |
| 697079003 | BRUSH BLOCK UNIT | 1 | |
| 697079206 | TOOL-BRUSH BLOCK GAP ADJUSTMENT | 5 | |
| 6528271001 | ALIGNMENT BLOCK | 1 | |
| 6635000220368 | ULTRASONIC TESTING SPARES:- BASIC CALIBRATION BLOCK FOR ULTRASONIC TESTER | 1 | |
| 6635010925129 | UT CALIBRATION BLOCK | 1 | |
| 753695A | Governor Flushing Block | 1 | |
| 757 SWAGGER AND CUTTER | BLOCKER DOOR & LINK | 1 | |
| 7637987-1 | Calibration Block | 1 | |
| 79C06085-1 | RESTRAINT BLOCK | 1 | |
| 79C06085-3 | RESTRAINT BLOCK | 1 | |
| 79C06085-4 | RESTRAINT BLOCK | 1 | |
| 8-140 | TERMINAL BLOCK | 4 | |
| 805276-S57-2 | SUPPORT BLOCK – 2.38 DIA GENERATOR | 1 | |
| 80RS20 | ULTRASONIC TEST BLOCK FOR MD AIRCRAFT | 1 | |
| 80T2341 | SPECIAL BEARING UPPER BLOCKER DOOR | 1 | |
| 8117A | RUNOUT BLOCK SET | 1 | |
| 830-7538-047 | SENSOR-LIGHT SENSOR BLOCK ASSEMBLY | 1 | |
| 833115-1 | BLOCKING FIXTURE | 1 | |
| 834233-1 | BLOCKING SPACER | 1 | |
| 834233-1PM | BLOCKING SPACER | 1 | |
| 8400K | CALIBRATION BLOCK - STANDARD | 7 | |
| 856A-2609-G01 | Block, Jacking | 26 | |
| 856A2609 | BLOCK,JACKING-FUEL PUMP | 4 | |
| 856A2609 REV C | BLOCK, JACKING-FUEL PUMP & MEC PACKAGE | 1 | |
| 856A2609601 | BLOCK JACKING FUEL PUMP | 1 | |
| 856A2609G01 | BLOCK JACKING FUEL PUMP MEC/HMU | 26 | |
| 856A2673 | BLOCK , JACKING - FUEL PUMP | 4 | |
| 856A2673G02 | BLOCK , JACKING - FUEL PUMP | 17 | |
| 856A2691G01 | SPECIAL FORCEPS FOR ENGINE RUBBER BLOCK DISASSEMBLY | 26 | |
| 856A3707G05-BLOCK | BLOCK - CFM56-7 FAN BLADE SPACER PULLER | 1 | |
| 856A3707P15 | Block only | 4 | |
| 856A3782P09 | TIGHTENING BLOCK | 1 | |
| 856A3948G01 | FAN BLADE FILLING BLOCK PULLER | 2 | |
| 860521-001 | BLOCK-MONITOR V | 1 | |
| 88660 | Henkel 97221 LOCTITE Gray 16 Guage 1-14 Helical Thread & UV Light Block Additive HDPE Tapered Tip Dispense Needle - Pack of 50 | 1 | |
| 88661 | Henkel 97222 LOCTITE Green 16 Guage 1-14 Helical Thread & UV Light Block Additive HDPE Tapered Tip Dispense Needle - Pack of 50 | 3 | |
| 88662 | Henkel 97223 LOCTITE Pink 20 Guage 1-14 Helical Thread & UV Light Block Additive HDPE Tapered Tip Dispense Needle - Pack of 50 | 1 | |
| 88663 | Henkel 97224 LOCTITE Blue 22 Gauge 1-14 Helical Thread & UV Light Block Additive HDPE Tapered Tip Dispense Needle - Pack of 50 | 1 | |
| 8811512000 | RUN ON AND RUN OFF BLOCK | 1 | |
| 8811513000 | RUN ON AND RUN OFF BLOCK | 1 | |
| 8811514000 | RUN ON AND RUN OFF BLOCK | 1 | |
| 8811515000 | RUN ON AND RUN OFF BLOCK | 1 | |
| 8F-V12LN-S | BLOCKING SPACER | 1 | |
| 90-MT3012-50 | Bowers Mictrac Base Unit 0-12" c/w TF-PL Blocks | 1 | |
| 90-MT3024-50 | Bowers Mictrac Base Unit 0-24" c/w TF-PL Blocks | 1 | |
| 90-MT3036-50 | Bowers Mictrac Base Unit 0-36" c/w TF-PL Blocks | 1 | |
| 90-MT3048-50 | Bowers Mictrac Base Unit 0-48" c/w TF-PL Blocks | 1 | |
| 90-TF-.75T | Bowers Taper Blocks ¾", 8 & 10 Round | 1 | |
| 90-TF-1.12T | Bowers 1 1/8" Taper Blocks, 1.125 TPF Connectors | 1 | |
| 90-TF-1.25RSC | Bowers 1¼" Taper Blocks, 1.25 TPF Rotary Shouldered Connectors | 1 | |
| 90-TF-1.5RSC | Bowers 1½" Taper Blocks, 1.5 TPF Rotary Shouldered Connectors | 1 | |
| 90-TF-1.75T | Bowers 1¾" Taper Blocks, 1.75 TPF Connectors | 1 | |
| 90-TF10 | Bowers Tapered Setting Blocks 10° Half Angle | 1 | |
| 90-TF15 | Bowers Tapered Setting Blocks 15° Half Angle | 1 | |
| 90-TF1F | Bowers Flat face Setting Block 1.5" for Mictrac | 1 | |
| 90-TF20 | Bowers Tapered Setting Blocks 20° Half Angle | 1 | |
| 90-TF30 | Bowers Tapered Setting Blocks 30° Half Angle | 1 | |
| 90-TF45 | Bowers Tapered Setting Blocks 45° Half Angle | 1 | |
| 90-TFBX | Bowers 23° BXR Ring Groove Dia/Width Sett Block | 1 | |
| 904-10329-1 | BLOCK TRIAX MOUNT | 1 | |
| 904-10329B | BLOCK TRIAX MOUNT | 1 | |
| 906-10090-2 | BLOCK VELOCIMETER W/POWER CONVERTER | 1 | |
| 9081003 | CONDUCTIVITY REFERENCE BLOCK | 1 | |
| 918540-1-1 | BLOCKING FIXTURE | 1 | |
| 918664-1-1 | BLOCKING FIXTURE | 1 | |
| 920618-1-1 | BLOCKING DRIFT | 1 | |
| 920724-1-1 | BLOCKING VALVE TEST MANIFOLD | 1 | |
| 9300-923 | HEAD ALIGN BLOCK | 1 | |
| 9300923 | HEAD ALIGNMENT BLOCK | 1 | |
| 9522103 | CONDUCTIVITY STANDARD BLOCK | 1 | |
| 9522110 | CONDUCTIVITY BLOCK | 2 | |
| 9522321 | CONDUCTIVITY BLOCK (BLOCK OF FIVE) | 1 | |
| 9319910030 | INDICATOR,VISUAL,BLOCKAGE | 1 | |
| 94-2748-00 | SWASH PLATE BLOCKING | 1 | |
| 95-92013-0001 | BLOCK, JACKING | 1 | |
| 9520011821 | INDICATOR,VISUAL,BLOCKAGE | 1 | |
| 9560166910 | INDICATOR,VISUAL,BLOCKAGE | 1 | |
| 9560167160 | INDICATOR,VISUAL,BLOCKAGE | 1 | |
| 9560167500 | INDICATOR,VISUAL,BLOCKAGE,ASSY | 1 | |
| 9560168040 | INDICATOR,FILTER PRE-BLOCKAGE | 1 | |
| 9560170530 | INDICATOR,VISUAL,BLOCKAGE | 1 | |
| 9560171230 | INDICATOR,VISUAL,BLOCKAGE | 1 | |
| 968.29.11.375 | BLOCK ASSY,CARBON | 1 | |
| 97D29000025000 | DRAIN BRAKE BLOCKS TOOLING | 1 | |
| 97F53408313000 | BLOCK SET - DISTANCE | 1 | |
| 981-102 | ANGLE CALIBRATION BLOCKS SET | 1 | |
| 98A27003001000 | THIS TOOL IS USED TO BLOCK THE CABLE QUADRANT AT FR41 TO CHECK AND ADJUST THE TENSION OF THE LINKAGE | 29 | |
| 98A27901000000 | ACTUATOR - SPOILER 3 THRU 7 DISTRIBUTOR BLOCK - REMOVAL/INSTALLATION | 14 | |
| 98A53803501000 | CALIBRATION BLOCK | 1 | |
| 98A53P03020000 | CALIBRATION BLOCK | 1 | |
| 98A54003069000 | CALIBRATION BLOCK | 2 | |
| 98A54003075 | CALIBRATION BLOCK | 2 | |
| 98A54003077 | CALIBRATION BLOCK | 2 | |
| 98A54003098000 | NDT REF STANDARD BLOCK TOOL | 1 | |
| 98A54403022216 | POSITIONING BLOCK | 1 | |
| 98A54403022219 | BLOCK POSITIONING | 1 | |
| 98A54403022220 | BLOCK POSITIONING | 1 | |
| 98A57103000000 | REFERENCE BLOCK | 1 | |
| 98A57103001000 | REFERENCE BLOCK | 1 | |
| 98A57103002000 | REFERENCE BLOCK | 1 | |
| 98A57304002022 | HINGE BLOCK | 1 | |
| 98A57304002100 | ANCHOR BLOCK ASSY | 1 | |
| 98D27504113226 | BLOCK SETTING | 1 | |
| 98D27804013000 | GO NO GO GAUGE SLAT RUBBING BLOCK | 12 | |
| 98D27804020000 | BLOCK-SLAT GAPPING | 7 | |
| 98D27804020001 | BLOCK-SLAT GAPPING | 16 | |
| 98D2780402001 | Block - Slat Gapping | 1 | |
| 98D27894020000 | BLOCK-SLAT GAPPING | 1 | |
| 98D29208246001 | RAT BLOCKING DEVICE | 31 | |
| 98D36003004000 | Blocking device fav | 8 | |
| 98D51407291001 | CALIBRATION BLOCK SET | 1 | |
| 98D52603001000 | (SEATING BLOCK AIRSTAIRDOOR ACT.) | 7 | |
| 98D5330300200 | NDT BLOCK TOOL | 1 | |
| 98D5330300202 | NDT BLOCK TOOL | 1 | |
| 98D5330300204 | NDT BLOCK TOOL | 1 | |
| 98D54403007000 | REFERENCE BLOCK | 4 | |
| 98D57004000200 | REACTION BLOCK | 1 | |
| 98D57004000202 | LOCATION BLOCK | 1 | |
| 98D57004000206 | INSTALLATION BLOCK | 1 | |
| 98D57004007001 | BLOCK-SLIPPER (REAR SPAR ATTACHMENT BRACKET-ACTUATOR) | 1 | |
| 98D57004019000 | SLIPPER BLOCK(REAR SPAR ATTACHMENT BRACKET-ACTUATOR) | 15 | |
| 98D57004019001 | SLIPPER BLOCK (72 TON U/C) | 12 | |
| 98D57004080202 | REACTION BLOCK | 1 | |
| 98D57004080204 | INSTALLATION BLOCK | 1 | |
| 98D57103002000 | REFERENCE BLOCK | 1 | |
| 98D71203501324 | LH COUNTOUR BLOCK | 1 | |
| 98F27808255000 | BLOCK - SLAT GAPPING, PREMOD 45967 | 1 | |
| 98F27808255001 | BLOCK - SLAT GAPPING | 6 | |
| 98F27808682000 | BLOCK - SLAT GAPPING | 9 | |
| 98F29003500000 | BLOCK SLAT GAPPING | 10 | |
| 98F29103500102 | INFLATION BLOCK HANDLE | 1 | |
| 98F32104009102 | MOUNTING BLOCK LH | 1 | |
| 98F32104009103 | MOUNTING BLOCK RH | 1 | |
| 98F32104017101 | REACTION BLOCK | 1 | |
| 98F54003001000 | REFERENCE BLOCK | 14 | |
| 98F55209004000 | REFERENCE BLOCK | 12 | |
| 98F57004007000 | GUIDE - ACTUATOR LINK （SUPPER BLOCK） | 10 | |
| 98F71203009000 | BLOCKING ENG MOUNT | 3 | |
| 98L21503004202 | HORIZONTAL BLOCK | 1 | |
| 98L27003000416 | BLOC SUPPORT ANNEAU RING BLOCK SUPPORT | 1 | |
| 98L27201000202 | BLOCK DOWN | 1 | |
| 98L27508660200 | LOCKING BLOCK | 1 | |
| 98L27808557000 | BLOCK SLAT GAPPING | 1 | |
| 98L27808684000 | BLOCK-GAPPING,SLAT | 3 | |
| 98L29203000248 | LOCKING BLOCK | 1 | |
| 98L32104020218 | CLAMPING BLOCK | 1 | |
| 98L32104031100 | SETTING BLOCK ASSY | 1 | |
| 98L32104031102 | SETTING BLOCK ASSY | 1 | |
| 98S27005006000 | Pitch Uncpl Lever Blocking | 7 | |
| 98S27005009000 | TOOLING BLOCKER 42 | 1 | |
| 98S27005012000 | ELEVATOR BLOCKING TOOL | 1 | |
| 98S27105002000 | AILERON BLOCKING TOOL (SPRG TAB) | 4 | |
| 98S29103000000 | WRENCHES-R/1, HYDRAULIC BLOCK SENSORS | 6 | |
| 98S51605001-206 | MINI ANGLE BEAM ALUMINUM V2 BLOCK ½" (12.5mm) or 1" (25.4 mm) thick, 1" radius opposite 2" radius, with 5/64" diameter side drilled hole (3/4" deep flat bottom hole in 1" thick version). Aluminum 7075-T6. Includes form fitted case. | 3 | |
| 98S51605001-208 | MINI ANGLE BEAM BLOCK CS V2 BLOCK..½" (12.5mm) or 1" (25.4 mm) thick, 1" radius opposite 2" radius, with 5/64" diameter side drilled hole (3/4" deep flat bottom hole in 1" thick version).1018 Carbon Steel with form fitted case | 3 | |
| 98S51605001000 | CALIB REFERENCE BLOCKS | 2 | |
| 98S52305005-000 | REFERENCE BLOCK | 4 | |
| 98S53005005-000ALT | NDT BLOCK | 1 | |
| 98S53005006-000ALT | NDT BLOCK | 1 | |
| 98S53005007-000ALT | NDT BLOCK | 1 | |
| 98S53005008-000ALT | NDT BLOCK | 1 | |
| 98S53005010-000ALT | NDT BLOCK | 1 | |
| 98S53005011-000ALT | NDT BLOCK | 1 | |
| 98S53005012ALT | NDT BLOCK | 1 | |
| 98S53005013-000 | NDT BLOCK | 3 | |
| 98S53005013-000ALT | NDT BLOCK | 1 | |
| 98S53005014000 | NDT CALIBRATION BLOCK | 3 | |
| 98S53005016-000 | REFERENCE BLOCK | 3 | |
| 98S53005017-000ALT | NDT BLOCK | 1 | |
| 98S53005018-000ALT | NDT BLOCK | 1 | |
| 98S53005020-202 | CALIBRATION BLOCK | 2 | |
| 98S53005020-204 | CALIBRATION BLOCK | 2 | |
| 98S53005020-206 | CALIBRATION BLOCK | 2 | |
| 98S53005020-208 | CALIBRATION BLOCK | 3 | |
| 98S53005020-210 | CALIBRATION BLOCK | 2 | |
| 98S53005020-212 | CALIBRATION BLOCK | 2 | |
| 98S53005020-214 | CALIBRATION BLOCK | 2 | |
| 98S53005020-216 | CALIBRATION BLOCK | 2 | |
| 98S53305002-200 | REFERENCE BLOCK | 4 | |
| 98S53305004-000 | UT CALIBRATION BLOCK | 5 | |
| 98S53305005-000 | UT CALIBRATION BLOCK | 5 | |
| 98S54305002-200 | REFERENCE BLOCK | 5 | |
| 98S54305002200 | CALIBRATION BLOCK | 5 | |
| 98S55305011-000 | 98S55305011-000(REFERENCE BLOCK ) | 2 | |
| 98S55305011-0003 | CALIBRATION BLOCK | 1 | |
| 98S55305011-100 | CALIBRATION BLOCK | 1 | |
| 98S55305011000 | REFERENCE BLOCK | 2 | |
| 98S57105003-200 | REFERENCE BLOCK | 4 | |
| 98S57105009-200 | REFERENCE BLOCK | 2 | |
| 98S57105010200 | CALIBRATION BLOCK | 3 | |
| 98S57105011-200 | REFERENCE BLOCK | 3 | |
| 98S57105012-200 | CALIBRATION BLOCK | 3 | |
| 98S57105012200 | CALIBRATION BLOCK | 3 | |
| 98S57105031-200 | REFERENCE BLOCK | 2 | |
| 98S57105033-200 | REFERENCE BLOCK | 1 | |
| 98S57105034-200 | REFERENCE BLOCK | 1 | |
| 98S57205023-000ALT | NDT BLOCK | 1 | |
| 98S57205030.000 | CALIBRATION BLOCK | 3 | |
| 98S57205030.001 | COMPOSITE CALIBRATION BLOCK | 4 | |
| 98S57205030.004 | COMPOSITE CALIBRATION BLOCK | 5 | |
| 98S57205030000 | WING UPPER PANEL CALIBRATION BLOCK | 3 | |
| 98S57205030001 | CARBON CALIBRATION BLOCK | 4 | |
| 98S57205030004 | CARBON CALIBRATION BLOCK | 5 | |
| 98V27208779118 | BLOCKING SCREW | 1 | |
| 98V32104016000 | RETAINING TOOL - MLG PINTLE BLOCK | 4 | |
| 98V53009002104 | FUNCTION CHECK BLOCK (REF BLOCK) | 1 | |
| 98V55109011000 | BEARING BLOCK – HTP* | 1 | |
| 98V57004003000 | SLING - TRUNNION BLOCK | 3 | |
| 98V57004007000 | REAMING - TRUNNION BLOCK TOOL | 1 | |
| 98V57004012000 | EXTRACTOR - TRUNNION BLOCK FUSE PIN | 4 | |
| 995FF109002000 | REFERENCE BLOCK | 1 | |
| 9970-958-579 | CALIBRATION BLOCK | 1 | |
| 999061 | PRESSURE TEST MAIN HEATER BLOCK PLUG | 1 | |
| 999361 | PRESSURE TEST MAIN HEATER BLOCK PLUG | 1 | |
| 99A51003000000 | CALIBRATION BLOCK | 2 | |
| 99A51107299000 | REFERENCE BLOCK | 1 | |
| 99A51107299001 | Calibration Block | 5 | |
| 99A51107300000 | Calibration Block | 5 | |
| 99A51107399001 | Calibration Block | 1 | |
| 99A530003001101 | CALIBRATION BLOCK ALUMINUM | 1 | |
| 99A53003001100 | Calibration Block | 4 | |
| 99A53003001101 | Calibration Block | 8 | |
| 99A53003001102 | Calibration Block | 5 | |
| 99A53003001103 | Calibration Block | 4 | |
| 99A53003001104 | Calibration Block Titanium TA6V | 4 | |
| 99A53003001105 | Calibration Block | 4 | |
| 99A53003001106 | Calibration Block | 4 | |
| 99A53003001107 | Calibration Block Titanium TA6V | 4 | |
| 99A53003001108 | Figure 1 Calibration Block | 4 | |
| 99A53103002000 | Reference Block. Part 4 53-12-50 Pg. 401/402 | 1 | |
| 99A53107215000 | CALIBRATION BLOCK | 5 | |
| 99A53107230000 | NDT BLOCK TOOL | 1 | |
| 99A53107251000 | CALIBRATION BLOCK | 2 | |
| 99A53107265001 | REFERENCE BLOCK | 1 | |
| 99A53107269000 | Calibration Block | 1 | |
| 99A5310728300 | REFERENCE BLOCK | 1 | |
| 99A53107283000 | CALIBRATION BLOCK | 2 | |
| 99A53107287000 | Calibration Block | 7 | |
| 99A53107290000 | Calibration Block | 1 | |
| 99A53203006000 | REFERENCE BLOCK | 1 | |
| 99A53203007000 | REFERENCE BLOCK | 1 | |
| 99A53307236000 | CALIBRATION BLOCK | 4 | |
| 99A53307267000 | CALIBRATION BLOCK | 2 | |
| 99A53307267000 304 | AIRBUS A300-600 CALIBRATION BLOCK PART 4 53-30-52 PAGE 413 FIGURE 407. Material: 304 Stainless Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53307267000 7075T6 | AIRBUS A300-600 CALIBRATION BLOCK PART 4 53-30-52 PAGE 413 FIGURE 407. Material Aluminum 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53307267000/7150-T6 | AIRBUS A300-600 CALIBRATION BLOCK | 1 | |
| 99A53307274000 | CALIBRATION BLOCK | 5 | |
| 99A53307292000 | CALIBRATION BLOCK | 1 | |
| 99A53307292001 | Calibration Block | 4 | |
| 99A53307319000 | CALIBRATION BLOCK | 2 | |
| 99A53403007000 | REFERENCE BLOCK | 2 | |
| 99A53407285000 | Calibration Block | 1 | |
| 99A53507286000 | CALIBRATION BLOCK | 2 | |
| 99A54003098000 | Calibration Block | 1 | |
| 99A5440302000 | NDT REF STANDARD BLOCK TOOL | 1 | |
| 99A55307306000 | CALIBRATION BLOCK | 2 | |
| 99A55307328000 | CALIBRATION BLOCK - Fab. Stufenblock 80mm | 1 | |
| 99A55407291000 | FUNCTION TEST BLOCK | 5 | |
| 99A55407291000F | FUNCTION TEST BLOCK | 1 | |
| 99A57004001286 | Calibration Block | 1 | |
| 99A57004001298 | CONVERSION BLOCK | 1 | |
| 99A57004001299 | CONVERSION BLOCK | 1 | |
| 99A57004001303 | CONVERSION BLOCK | 1 | |
| 99A57004001304 | CONVERSION BLOCK | 1 | |
| 99A57004001312 | CONVERSION BLOCK | 1 | |
| 99A57004001313 | CONVERSION BLOCK | 1 | |
| 99A57004001314 | CONVERSION BLOCK | 1 | |
| 99A57004001315 | CONVERSION BLOCK | 1 | |
| 99A57004001316 | CONVERSION BLOCK | 1 | |
| 99A57004001317 | CONVERSION BLOCK | 1 | |
| 99A57004001318 | CONVERSION BLOCK | 1 | |
| 99A57004001319 | CONVERSION BLOCK | 1 | |
| 99A57004101000 | Calibration Block | 6 | |
| 99A57004101000-MOD | CALIBRATION BLOCK (NDT) | 1 | |
| 99A57103009000 | REFERENCE BLOCK | 2 | |
| 99A57103010000 | REFERENCE BLOCK | 2 | |
| 99A57103011000 | REFERENCE BLOCK | 2 | |
| 99A57103012000 | REFERENCE BLOCK | 2 | |
| 99A57103025001 | REFERENCE BLOCK,DIMENSIONS:26X240MM, | 3 | |
| 99A57103029000 | REFERENCE BLOCK | 4 | |
| 99A57103030000 | REFERENCE BLOCK | 4 | |
| 99A57103041000 | REFERENCE BLOCK | 3 | |
| 99A57103042000 | REFERENCE BLOCK | 2 | |
| 99A57103043000 | REFERENCE BLOCK | 2 | |
| 99A57103044000 | REFERENCE BLOCK | 2 | |
| 99A57103045000 | REFERENCE BLOCK | 2 | |
| 99A57103046000 | REFERENCE BLOCK | 1 | |
| 99A57103057001 | REFERENCE BLOCK | 1 | |
| 99A57103057002 | ANGULAR POINTER OFFSET BLOCK | 1 | |
| 99A57104331000 | AIRBUS CALIBRATION BLOCK A318/A319/A320/A321: PART 4 57-00-00-991-003-A SHEET 01, PAGE 10. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance(COC) | 1 | |
| 99A57104354000 | SEARCH UNIT GUIDE BLOCK | 2 | |
| 99A57104355000 | SEARCH UNIT GUIDE BLOCK | 3 | |
| 99A57204402000 | REFERENCE BLOCK | 2 | |
| 99A57204403000 | CALIBRATION BLOCK | 3 | |
| 99A57204403001 | REFERENCE STANDARD - CALIBRATION BLOCK | 5 | |
| 99A57257327000 | CALIBRATION BLOCK | 1 | |
| 99A57504296000 | CALIBRATION BLOCK | 3 | |
| 99D51103005000 | NDT CALIBRATION BLOCK | 1 | |
| 99D51103008000 | NDT CALIBRATION BLOCK | 1 | |
| 99D51103009000 | NDT CALIBRATION BLOCK | 1 | |
| 99D51103010000 | REFERENCE BLOCK | 1 | |
| 99D51103011000 | SPLIT CONICAL CALIBRATION BLOCK | 1 | |
| 99D51103012000 | CALIBRATION BLOCK | 1 | |
| 99D51103013000 | CALIBRATION BLOCK | 2 | |
| 99D51103014000 | CALIBRATION BLOCK | 1 | |
| 99D51103015000 | CALIBRATION BLOCK | 1 | |
| 99D51103016000 | BLOCK NDT CALIB STND | 1 | |
| 99D51107295000 | CALIBRATION BLOCK | 5 | |
| 99D51303001000 | NDT CALIBRATION BLOCK | 1 | |
| 99D51303002000 | ULTRASONIC THICKNESS GAUGE TEST BLOCK | 1 | |
| 99D51307001000 | BLOCK REFERENCE NDT | 1 | |
| 99D51407291000 | Calibration Block | 2 | |
| 99D51407291001 | CALIBRATION BLOCK SET | 7 | |
| 99D51407291001 | CALIRATION BLOCK SET - PATRON HFEC | 7 | |
| 99D52103001000 | REFERENCE BLOCK | 3 | |
| 99D52704190000 | REFERENCE BLOCK, PG 1 & 2 | 1 | |
| 99D52809004000 | CALIBRATION BLOCK | 7 | |
| 99D53103000000 | REFERENCE BLOCK | 5 | |
| 99D53103001000 | REFERENCE BLOCK | 2 | |
| 99D53203000002 | REFERENCE BLOCK | 5 | |
| 99D53203001000 | REFERENCE BLOCK | 1 | |
| 99D53207304000 | REFERENCE BLOCK | 5 | |
| 99D53409001000 | Calibration Block | 5 | |
| 99D54403000004 | REFERENCE BLOCK | 7 | |
| 99D54403000005 | REFERENCE BLOCK | 1 | |
| 99D54403000006 | CALIBRATION REFERENCE BLOCK | 1 | |
| 99D54403001000 | Reference Block | 1 | |
| 99D54403001002 | REFERENCE BLOCK | 4 | |
| 99D54403002000 | REFERENCE BLOCK | 4 | |
| 99D54403003000 | REFERENCE BLOCK | 4 | |
| 99D54403004000 | Reference Block | 6 | |
| 99D54403007000 | REFERENCE BLOCK | 3 | |
| 99D54503004000 | AIRBUS CALIBRATION BLOCK A318/A319/A320/A321: PART 4 54-52-17-991-003-A SHEET 01, PAGE7. MATERIAL: 15-5PH STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D54503005040 | REFERENCE BLOCK | 1 | |
| 99D54503005041 | REFERENCE BLOCK | 1 | |
| 99D54503005042 | REFERENCE BLOCK | 1 | |
| 99D54503006000 | AIRBUS CALIBRATION BLOCK : PART 4 54-53-08-991-007-A SHEET 01. MATERIAL: 15-5PH STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D54503007000 | AIRBUS CALIBRATION BLOCK : PART 4 54-53-09-991-003-A SHEET 01. MATERIAL: 15-5PH STEEL. Includes Test Report and Certificate of Conformance. | 2 | |
| 99D55109001000 | CALIBRATION BLOCK SET | 7 | |
| 99D55109001000/1MM | AIRBUS A318/A319/A320/A321 CARBON STANDARD PT 4 51-10-06 PAGE 7. MULTIDIRECTIONAL TAPE MATERIAL BLOCK NOMINAL THICKNESS (1mm). Includes Test Report and Certificate of Conformance. | 1 | |
| 99D55109001000 | CALIRATION BLOCK SET - PATRON HFEC | 7 | |
| 99D55367001000 | CALIBRATION BLOCK - FABRIC | 1 | |
| 99D55367002000 | CALIBRATION BLOCK - TAPE | 1 | |
| 99D557204171000 | REFERENCE BLOCK | 1 | |
| 99D57003007000 | CALIBRATION BLOCK | 2 | |
| 99D57003009000 | CALIBRATION BLOCK | 2 | |
| 99D57003011000 | CALIBRATION BLOCK | 2 | |
| 99D57004000000 | CALIBRATION BLOCK | 4 | |
| 99D57004001000 | Calibration Block | 4 | |
| 99D57103002001 | NDT REFERENCE BLOCK TOOL | 5 | |
| 99D57103003000 | REFERENCE BLOCK | 1 | |
| 99D57103004000 | REFERENCE BLOCK | 4 | |
| 99D57103005001 | REFERENCE BLOCK | 5 | |
| 99D57103006000 | REFERENCE BLOCK | 5 | |
| 99D57103007000 | Calibration Block | 3 | |
| 99D57103008000 | REFERENCE BLOCK | 6 | |
| 99D57103009000 | REFERENCE BLOCK | 4 | |
| 99D57103010000 | REFERENCE BLOCK | 5 | |
| 99D57103011000 | REFERENCE BLOCK | 5 | |
| 99D57103012000 | Reference Block | 6 | |
| 99D57103013000 | REFERENCE BLOCK | 6 | |
| 99D57103014000 | NDT TEST BLOCK TOOL | 5 | |
| 99D57103015000 | Calibration Block | 4 | |
| 99D57103016000 | Calibration Block | 7 | |
| 99D57103017000 | REFERENCE BLOCK | 5 | |
| 99D57103018000 | REFERENCE BLOCK | 4 | |
| 99D57103019000 | REFERENCE BLOCK | 4 | |
| 99D57103020000 | Calibration Block | 3 | |
| 99D57103021000 | Calibration Block | 5 | |
| 99D57103025000 | Reference Block | 2 | |
| 99D57103026000 | Reference Block | 2 | |
| 99D57103029000 | Airbus A318/A319/A320/A321 Reference Block. 2024 Aluminum. PB4 57-12-02 Page 99 Sheet 01, 57-12-02-991-003-A SHEET 1. | 1 | |
| 99D57103031000 | Reference Block | 2 | |
| 99D57103032000 | REFERENCE BLOCK | 2 | |
| 99D57103033000 | REFENCE BLOCK | 2 | |
| 99D57103034000 | REFERENCE BLOCK | 2 | |
| 99D57103035000 | BLOCK REF STANDRD | 2 | |
| 99D57103036000 | CALIBRATION BLOCK | 2 | |
| 99D57204105000 | REFERENCE BLOCK | 5 | |
| 99D57204107000 | Reference Block 99D57204107000 | 6 | |
| 99D57204108000 | SEARCH UNIT GUIDE BLOCK | 4 | |
| 99D57204116000 | TRANSDUCER GUIDE BLOCK (NDT) | 3 | |
| 99D57204125000 | BLOCK-REFERENCE | 5 | |
| 99D57204163000 | BLOCK-REFERENCE | 3 | |
| 99D57204163000-A | BLOCK-REFERENCE | 1 | |
| 99D57204163000-B | BLOCK-REFERENCE | 1 | |
| 99D57204163000-C | BLOCK-REFERENCE | 1 | |
| 99D57204164000 | BLOCK-REFERENCE | 4 | |
| 99D57204164001 | BLOCK-REFERENCE | 4 | |
| 99D57204166000 | BLOCK-REFERENCE | 1 | |
| 99D57204167000 | BLOCK-REFERENCE | 2 | |
| 99D57204169000 | BLOCK REFERENCE | 3 | |
| 99D57204170000 | BLOCK REFERENCE | 3 | |
| 99D57204171000 | Reference block | 2 | |
| 99D57204175000 | REFERENCE BLOCK | 4 | |
| 99D57204183000 | BLOCK-REFERENCE | 2 | |
| 99D57204186000 | REFERENCE BLOCK | 2 | |
| 99D57204189000 | CALIBRATION BLOCK | 1 | |
| 99D57204190000 | REFERENCE BLOCK | 1 | |
| 99D57204191000 | REFERENCE BLOCK | 1 | |
| 99D5720463000 | BLOCK-REFERENCE | 1 | |
| 99D57294001000 | Airbus A318/A319/A320/A321 Calibration Block, Figure 57-29-08-991-023-A. Material: Cast Acrylic. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D57404002000 | REFERENCE BLOCK | 1 | |
| 99D57504100000 | Reference Block | 2 | |
| 99D57504102000 | Reference Block | 4 | |
| 99D57504103001 | Reference Block | 3 | |
| 99D57504107000 | Reference Block | 2 | |
| 99D57504108000 | Reference Block | 2 | |
| 99D57504109000 | CALIBRATION REFERENCE BLOCK | 3 | |
| 99D57704100000 | REFERENCE BLOCK | 2 | |
| 99D91107295000 | CALIBRATION BLOCK | 1 | |
| 99DS4503005040 | REFERENCE BLOCK | 1 | |
| 99DS4503005041 | REFERENCE BLOCK | 1 | |
| 99DS4503005042 | REFERENCE BLOCK | 1 | |
| 99DTA1511 | STANDARD BLOCK | 1 | |
| 99F-533-03038-000 | Reference Block NDT | 2 | |
| 99F-533-03039-000 | Reference Block NDT | 2 | |
| 99F-533-03041-000 | Reference Block NDT | 2 | |
| 99F28304000000 | BLOCKING COVER | 8 | |
| 99F28304001000 | BLOCKING COVER | 14 | |
| 99F53003001105 | REFERENCE BLOCK | 1 | |
| 99F53003001108 | REFERENCE BLOCK | 1 | |
| 99F5303061000 | REFERENCE BLOCK | 1 | |
| 99F5303063000 | REFERENCE BLOCK | 1 | |
| 99F5303067000 | REFERENCE BLOCK | 1 | |
| 99F53103000000 | REFERENCE BLOCK | 3 | |
| 99F53103001000 | REFERENCE BLOCK | 1 | |
| 99F53103002000 | REFERENCE BLOCK | 1 | |
| 99F53103003000 | REFERENCE BLOCK | 1 | |
| 99F53103004000 | TESTING BLOCK | 1 | |
| 99F53103005000 | TESTING BLOCK | 1 | |
| 99F53103006000 | REFERENCE BLOCK | 1 | |
| 99F53103007000 | REFERENCE BLOCK | 1 | |
| 99F53103009000 | TESTING BLOCK | 1 | |
| 99F53103010000 | TESTING BLOCK | 1 | |
| 99F53107330000 | REFERENCE BLOCK SET (WRONG MATERIALS) | 2 | |
| 99F53207310000 | REFERENCE BLOCK | 4 | |
| 99F53207313000 | CALIBRATION BLOCK | 3 | |
| 99F53207314000 | CALIBRATION BLOCK | 2 | |
| 99F53207316000 | Airbus Standard A330 53-21-36-PB6 PG 16 FIGURE 53-21-36-991-004-A SHEET 01..Calibration Block PN 99F53207316000 | 1 | |
| 99F53207317000 | Airbus Standard A330 53-21-36-PB6 PG 18 FIGURE 53-21-36-991-005-A SHEET 01..Calibration Block PN 99F53207317000 | 1 | |
| 99F53207318000 | Airbus Standard A330 53-21-36-PB6 PG 20 FIGURE 53-21-36-991-006-A SHEET 01..Calibration Block PN 99F53207318000 | 1 | |
| 99F5330 7305001 | REFERENCE BLOCK | 5 | |
| 99F53303000001 | REFERENCE BLOCK | 1 | |
| 99F53303001001 | REFERENCE BLOCK | 1 | |
| 99F53303002000 | REFERENCE BLOCK | 1 | |
| 99F53303005000 | Reference Block | 2 | |
| 99F53303007000 | REFERENCE BLOCK | 1 | |
| 99F53303008001 | BLOCK-REFERENCE | 2 | |
| 99F53303009000 | REFERENCE BLOCK | 1 | |
| 99F53303010000 | REFERENCE BLOCK | 2 | |
| 99F53303011000 | REFERENCE BLOCK | 1 | |
| 99F53303012000 | REFERENCE BLOCK | 2 | |
| 99F53303013000 | REFERENCE BLOCK | 2 | |
| 99F53303014001 | REFERENCE BLOCK | 1 | |
| 99F53303015000 | REFERENCE BLOCK | 2 | |
| 99F53303017000 | REFERENCE BLOCK | 3 | |
| 99F53303018000 | REFERENCE BLOCK | 3 | |
| 99F53303019000 | REFERENCE BLOCK | 3 | |
| 99F53303020000 | REFERENCE BLOCK | 3 | |
| 99F53303021000 | REFERENCE BLOCK | 3 | |
| 99F53303023000 | REFERENCE BLOCK | 1 | |
| 99F53303026000 | CALIBRATION BLOCK | 1 | |
| 99F53303027000 | CALIBRATION BLOCK | 1 | |
| 99F53303029000 | REFERENCE BLOCK | 2 | |
| 99F53303030000 | CALIBRATION BLOCK | 1 | |
| 99F53303031000 | REFERENCE BLOCK | 1 | |
| 99F53303032000 | REFERENCE BLOCK | 2 | |
| 99F53303034000 | REFERENCE BLOCK | 1 | |
| 99F53303035000 | REFERENCE BLOCK | 1 | |
| 99F53303036000 | REFERENCE BLOCK | 1 | |
| 99F53303038000 | REFERENCE BLOCK | 2 | |
| 99F53303039000 | REFERENCE BLOCK | 2 | |
| 99F53303040000 | REFERENCE BLOCK | 1 | |
| 99F53303041000 | REFERENCE BLOCK | 2 | |
| 99F53303042000 | REFERENCE BLOCK | 1 | |
| 99F53303043000 | REFERENCE BLOCK | 1 | |
| 99F53303044000 | REFERENCE BLOCK | 1 | |
| 99F53303046000 | REFERENCE BLOCK | 1 | |
| 99F53303047000 | REFERENCE BLOCK | 1 | |
| 99F53303048000 | REFERENCE BLOCK | 1 | |
| 99F53303049000 | REFERENCE BLOCK | 1 | |
| 99F53303050000 | REFERENCE BLOCK | 1 | |
| 99F53303051000 | REFERENCE BLOCK | 1 | |
| 99F53303052000 | REFERENCE BLOCK | 1 | |
| 99F53303053000 | REFERENCE BLOCK | 1 | |
| 99F53303054000 | REFERENCE BLOCK | 1 | |
| 99F53303055000 | REFERENCE BLOCK | 1 | |
| 99F53303056000 | REFERENCE BLOCK | 1 | |
| 99F53303057000 | CALIBRATION BLOCK | 1 | |
| 99F53303058000 | REFERENCE BLOCK | 1 | |
| 99F53303059000 | REFERENCE BLOCK | 1 | |
| 99F53303060000 | REFERENCE BLOCK | 1 | |
| 99F53303061000 | REFERENCE BLOCK | 1 | |
| 99F53303062000 | REFERENCE BLOCK | 1 | |
| 99F53303065000 | REFERENCE BLOCK | 2 | |
| 99F53303066000 | REFERENCE BLOCK | 2 | |
| 99F53303067000 | REFERENCE BLOCK | 1 | |
| 99F53303068000 | REFERENCE BLOCK | 1 | |
| 99F53303069000 | REFERENCE BLOCK | 1 | |
| 99F53303070000 | REFERENCE BLOCK | 1 | |
| 99F53303073000 | REFERENCE BLOCK | 1 | |
| 99F53303075000 | REFERENCE BLOCK | 1 | |
| 99F53303076000 | REFERENCE BLOCK | 1 | |
| 99F53303078000 | REFERENCE BLOCK | 1 | |
| 99F53303079000 | REFERENCE BLOCK | 1 | |
| 99F53303084000 | REFERENCE BLOCK | 1 | |
| 99F53303085000 | REFERENCE BLOCK | 1 | |
| 99F53303086000 | REFERENCE BLOCK | 5 | |
| 99F53303087000 | REFERENCE BLOCK | 4 | |
| 99F53303088000 | REFERENCE BLOCK | 1 | |
| 99F53303091000 | REFERENCE BLOCK | 1 | |
| 99F53303092000 | REFERENCE BLOCK | 1 | |
| 99F53303093000 | REFERENCE BLOCK | 1 | |
| 99F53303094000 | REFERENCE BLOCK | 2 | |
| 99F53303095000 | REFERENCE BLOCK | 2 | |
| 99F53303096000 | REFERENCE BLOCK | 1 | |
| 99F53303097000 | REFERENCE BLOCK | 2 | |
| 99F53303098000 | REFERENCE BLOCK | 1 | |
| 99F53303099000 | REFERENCE BLOCK | 3 | |
| 99F53303100000 | REFERENCE BLOCK | 1 | |
| 99F53303101000 | REFERENCE BLOCK | 2 | |
| 99F53303103000 | REFERENCE BLOCK | 1 | |
| 99F53303104000 | REFERENCE BLOCK | 1 | |
| 99F53303105000 | REFERENCE BLOCK | 1 | |
| 99F53303106000 | REFERENCE BLOCK | 1 | |
| 99F53303107000 | REFERENCE BLOCK | 1 | |
| 99F53303108000 | Reference Block | 1 | |
| 99F53303109000 | Reference Block | 1 | |
| 99F53303111000 | REFERENCE BLOCK | 1 | |
| 99F53303112000 | REFERENCE BLOCK | 1 | |
| 99F53303115000 | REFERENCE BLOCK | 3 | |
| 99F53303117000 | REFERENCE BLOCK | 1 | |
| 99F53303118000 | TESTING BLOCK | 2 | |
| 99F53303120000 | REFERENCE BLOCK | 2 | |
| 99F53303125000 | REFERENCE BLOCK | 2 | |
| 99F53303126000 | REFERENCE BLOCK | 1 | |
| 99F53303127000 | REFERENCE BLOCK | 1 | |
| 99F53307305001 | REFERENCE BLOCK | 5 | |
| 99F53407333000 | CALIBRATION BLOCK | 1 | |
| 99F53507256000 | CALIBRATION BLOCK | 2 | |
| 99F54403000001 | REFERENCE BLOCK | 1 | |
| 99F54403001001 | REFERENCE BLOCK | 1 | |
| 99F54403002001 | REFERENCE BLOCK | 5 | |
| 99F54403002002 | REFERENCE BLOCK | 3 | |
| 99F54403003000 | REFERENCE BLOCK | 1 | |
| 99F54403004000 | REFERENCE BLOCK | 1 | |
| 99F54503000000 | CALIBRATION BLOCK | 2 | |
| 99F54503005000 | REFERENCE BLOCK | 2 | |
| 99F54503006000 | TESTING BLOCK | 2 | |
| 99F54503009000 | REFERENCE BLOCK | 2 | |
| 99F54503010000 | REFERENCE BLOCK | 2 | |
| 99F54503011000 | REFERENCE BLOCK | 2 | |
| 99F54503012000 | CALIBRATION BLOCK | 2 | |
| 99F54603005000 | REFERENCE BLOCK | 1 | |
| 99F55109001000 | REFERENCE BLOCK | 2 | |
| 99F55109002000 | REFERENCE BLOCK | 2 | |
| 99F55364009000 | NDT CALIBRATION BLOCK | 1 | |
| 99F57004001000 | REFERENCE BLOCK | 1 | |
| 99F57004100001 | Calibration Block | 4 | |
| 99F57004101001 | BLOCK-CALIBRATION | 4 | |
| 99F57103006000 | REFERENCE BLOCK | 1 | |
| 99F57103007000 | REFERENCE BLOCK | 3 | |
| 99F57103008000 | REFERENCE BLOCK | 2 | |
| 99F57103009000 | REFERENCE BLOCK | 1 | |
| 99F57103010000 | REFERENCE BLOCK | 2 | |
| 99F57103011000 | REFERENCE BLOCK | 2 | |
| 99F57103012001 | REFERENCE BLOCK | 1 | |
| 99F57103014000 | REFERENCE BLOCK | 1 | |
| 99F57103015000 | REFERENCE BLOCK | 1 | |
| 99F57103016001 | REFERENCE BLOCK | 1 | |
| 99F57103017000 | Calibration Block | 3 | |
| 99F57103018000 | REFERENCE BLOCK | 2 | |
| 99F57103019000 | Reference Block | 4 | |
| 99F57103026000 | REFERENCE BLOCK | 1 | |
| 99F57103028000 | REFERENCE BLOCK | 2 | |
| 99F57103029000 | BLOCK-REFERENCE | 1 | |
| 99F57103030000 | BLOCK-REFERENCE | 1 | |
| 99F57103031000 | BLOCK-REFERENCE | 2 | |
| 99F57103032000 | REFERENCE BLOCK | 3 | |
| 99F57103035000 | REFERENCE BLOCK | 2 | |
| 99F57103037000 | REFERENCE BLOCK | 2 | |
| 99F57103040000 | REFERENCE BLOCK | 1 | |
| 99F57103041000 | REFERENCE BLOCK | 2 | |
| 99F57103042001 | REFERENCE BLOCK | 2 | |
| 99F57103044000 | REFERENCE BLOCK | 1 | |
| 99F57103046000 | REFERENCE BLOCK | 1 | |
| 99F57103047000 | REFERENCE BLOCK | 1 | |
| 99F57103048000 | REFERENCE BLOCK | 2 | |
| 99F57103049000 | REFERENCE BLOCK | 1 | |
| 99F5710305000 | REFERENCE BLOCK | 1 | |
| 99F57103050000 | REFERENCE BLOCK | 1 | |
| 99F57103051000 | REFERENCE BLOCK | 1 | |
| 99F57103052000 | REFERENCE BLOCK | 1 | |
| 99F57103053000 | REFERENCE BLOCK | 1 | |
| 99F57103054000 | REFERENCE BLOCK | 2 | |
| 99F57103056000 | Calibration Block | 1 | |
| 99F57103058000 | REFERENCE BLOCK | 1 | |
| 99F57104353001 | REFERENCE BLOCK | 1 | |
| 99F5710436300 | REFERENCE BLOCK | 1 | |
| 99F57113020000 | REFERENCE BLOCK | 1 | |
| 99F57113021000 | REFERENCE BLOCK | 1 | |
| 99F57113022000 | REFERENCE BLOCK | 1 | |
| 99F57203000000 | REFERENCE BLOCK | 1 | |
| 99F57203001000 | REFERENCE BLOCK | 1 | |
| 99F57204102000 | Calibration Block | 7 | |
| 99F57204104001 | NDT # Guide Block | 3 | |
| 99F57204105000 | CALIBRATION BLOCK | 3 | |
| 99F57204106000 | REFERENCE BLOCK | 4 | |
| 99F57204108000 | Reference Block | 3 | |
| 99F57204109001 | Reference Block | 2 | |
| 99F57204110000 | REFERENCE BLOCK | 1 | |
| 99F57204111000 | REFERENCE BLOCK | 1 | |
| 99F57204114000 | REFERENCE BLOCK | 1 | |
| 99F57204115000 | REFERENCE BLOCK | 1 | |
| 99F57204120000 | Reference Block | 4 | |
| 99F57204124000 | CALIBRATION BLOCK | 2 | |
| 99F57204124001 | REFERENCE BLOCK | 1 | |
| 99F57204128000 | REFERENCE BLOCK | 1 | |
| 99F57204128001 | BLOCK-REFERENCE | 1 | |
| 99F57204130000 | CALIBRATION BLOCK | 4 | |
| 99F57204133000 | REFERENCE BLOCK | 1 | |
| 99F57204135000 | Reference Block | 4 | |
| 99F57204136000 | Reference Block | 4 | |
| 99F57204137000 | Reference Block | 4 | |
| 99F57204138001 | Reference Block | 4 | |
| 99F57204140000 | REFERENCE BLOCK | 2 | |
| 99F57204140000 | REFERENCE BLOCK | 2 | |
| 99F57204144000 | Reference Block | 3 | |
| 99F57204145000 | Reference Block | 4 | |
| 99F57204146000 | Reference Block | 4 | |
| 99F57204162000 | REFERENCE BLOCK | 1 | |
| 99F57204168000 | REFERENCE BLOCK | 1 | |
| 99F57204171000 | SENSITIVITY BLOCK | 1 | |
| 99F57204173000 | REFERENCE BLOCKS AIRBUS STANDARD, A330 57-20-46 | 3 | |
| 99F57204174000 | REFERENCE BLOCKS AIRBUS STANDARD, A330 57-20-46 | 2 | |
| 99F57204175000 | REFERENCE BLOCKS AIRBUS STANDARD, A330 57-20-46 | 2 | |
| 99F57204176000 | REFERENCE BLOCKS AIRBUS STANDARD, A330 57-20-46 | 2 | |
| 99F57204177000 | REFERENCE BLOCKS AIRBUS STANDARD, A330 57-20-46 | 2 | |
| 99F57404001000 | REFERENCE BLOCK | 1 | |
| 99F57500001000 | REFERENCE BLOCK | 2 | |
| 99F57504109000 | REFERENCE BLOCK | 1 | |
| 99F57603001000 | REFERENCE BLOCK | 1 | |
| 99F57603002000 | REFERENCE BLOCK | 1 | |
| 99F57603003000 | REFERENCE BLOCK | 1 | |
| 99F57603004000 | REFERENCE BLOCK | 2 | |
| 99F57603005000 | REFERENCE BLOCK | 1 | |
| 99L51 107323000 | CALIBRATION BLOCK SET | 1 | |
| 99L51107323000 | CALIBRATION BLOCK SET | 1 | |
| 99L51304001000 | NDT CALIBRATION BLOCK | 1 | |
| 99L52103000000 | REFERENCE BLOCK | 1 | |
| 99L52107325000 | CALIBRATION BLOCK | 1 | |
| 99L53103000000 | REFERENCE BLOCK | 1 | |
| 99L53103001000 | REFERENCE BLOCK | 1 | |
| 99L53103002000 | REFERENCE BLOCK | 1 | |
| 99L53103004000 | REFERENCE BLOCK | 1 | |
| 99L53103005000 | REFERENCE BLOCK | 1 | |
| 99L53103006000 | REFERENCE BLOCK | 1 | |
| 99L53103008000 | REFERENCE BLOCK | 1 | |
| 99L53103010000 | REFERENCE BLOCK | 1 | |
| 99L53103012000 | REFERENCE BLOCK | 1 | |
| 99L53303000000 | REFERENCE BLOCK | 1 | |
| 99L53303001000 | REFERENCE BLOCK | 1 | |
| 99L53303002000 | REFERENCE BLOCK | 1 | |
| 99L53303003000 | REFERENCE BLOCK | 1 | |
| 99L53303004000 | REFERENCE BLOCK | 1 | |
| 99L53303005000 | REFERENCE BLOCK | 1 | |
| 99L53303006000 | REFERENCE BLOCK | 1 | |
| 99L53303007000 | REFERENCE BLOCK | 1 | |
| 99L53303008000 | REFERENCE BLOCK | 1 | |
| 99L53303009000 | REFERENCE BLOCK | 1 | |
| 99L53303010000 | REFERENCE BLOCK | 1 | |
| 99L53303011000 | REFERENCE BLOCK | 1 | |
| 99L53303013000 | REFERENCE BLOCK | 1 | |
| 99L53303015000 | REFERENCE BLOCK | 1 | |
| 99L53303016000 | REFERENCE BLOCK | 1 | |
| 99L53303017000 | REFERENCE BLOCK | 1 | |
| 99L53303018000 | REFERENCE BLOCK | 1 | |
| 99L53303019000 | REFERENCE BLOCK | 1 | |
| 99L53303020000 | REFERENCE BLOCK | 1 | |
| 99L53303021000 | AIRBUS A380-800 CALIBRATION BLOCK 53-31-33-991-006-A (SHEET 01& 02) PAGES 20-21. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53303022000 | REFERENCE BLOCK | 1 | |
| 99L53303024000 | REFERENCE BLOCK | 1 | |
| 99L53509001000 | CALIBRATION BLOCK | 1 | |
| 99L53509002000 | REFERENCE BLOCK | 1 | |
| 99L53509006000 | REFERENCE BLOCK | 1 | |
| 99L54503000000 | REFERENCE BLOCK | 1 | |
| 99L54503003000 | REFERENCE BLOCK | 1 | |
| 99L54503004000 | REFERENCE BLOCK | 1 | |
| 99L55209001000 | CALIBRATION BLOCK | 1 | |
| 99L57203000000 | REFERENCE BLOCK | 1 | |
| 99L57203001000 | REFERENCE BLOCK | 1 | |
| 99L57203002000 | REFERENCE BLOCK | 1 | |
| 99L57203003000 | REFERENCE BLOCK | 1 | |
| 99L57203005000 | REFERENCE BLOCK | 1 | |
| 99L57203006000 | REFERENCE BLOCK | 1 | |
| 99L57203007000 | A380 SEARCH UNIT GUIDE BLOCK; DELRIN(TEFLON), FIGURE:57-11-03-991-026-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L57203008000 | A380 SEARCH UNIT GUIDE BLOCK; DELRIN(TEFLON), FIGURE:57-11-03-991-027-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L57203009000 | AIRBUS A380 REFERENCE BLOCK ISB-8263 57-21-18 FIGURE 005. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L57204001000 | REFERENCE BLOCK | 1 | |
| 99L57204008000 | AIRBUS A310 CALIBRATION SENSITIVITY BLOCK PART4 57-29-01 PAGE 418 FIGURE 408. Includes Test Report and certificate of Conformance. | 1 | |
| 99L57204059000 | FAMILIARIZATION BLOCK | 1 | |
| 99L57204060000 | FAMILIARIZATION BLOCK | 1 | |
| 99L57204068000 | AIRBUS CALIBRATION BLOCK A380-800 57-21-17-991-024-A. MATERIAL: 2024 HDT T351. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L57204080000 | SENSITIVITY BLOCK | 1 | |
| 99L71003001000 | CALIBRATION BLOCK | 1 | |
| 99L71003001040 | REFERENCE BLOCK | 1 | |
| 99L71003001042 | REFERENCE BLOCK | 1 | |
| 99L71003001044 | REFERENCE BLOCK | 1 | |
| 99N28207315000 | Calibration Block | 4 | |
| 99N51107332000 | AIRBUS REFERENCE STANDARD A380-800 51-10-30-991-003-A FOR CLADDING MEASUREMENT BLOCK SET. Includes Test Report and Certificate of Conformance. | 2 | |
| 99N51109009000 | Airbus Calibration Block A318/A319/A320/A321 51-10-32 Figure 51-10-32-991-003-A Sheet 02 Page 11. Material: 2024-T351 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 99N51109010000 | Airbus Calibration Block A318/A319/A320/A321 51-10-32 Figure 51-10-32-991-003-A Sheet 02 Page 12. Material: 2024-T351 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 99V51307001000 | CALIBRATION BLOCKS FOR POSITECTOR 6000 | 1 | |
| 99V51307002000 | CALIBRATION BLOCKS FOR POSITECTOR 6000 | 1 | |
| 99V51307003000 | CALIBRATION BLOCKS FOR POSITECTOR 6000 | 1 | |
| 99V51307004000 | CALIBRATION BLOCKS FOR POSITECTOR 6000 | 1 | |
| 99V51307008000 | CALIBRATION BLOCKS FOR POSITECTOR 6000 | 1 | |
| 99V51907329000 | CALIBRATION BLOCK | 2 | |
| 99V51907331000 | CALIBRATION BLOCK | 1 | |
| 99V52307335000 | CALIBRATION BLOCK | 1 | |
| 99V52307336000 | CALIBRATION BLOCK | 1 | |
| 99V53009001000 | FUNCTION CHECK BLOCK | 1 | |
| 99V57103001000 | CALIBRATION BLOCK | 1 | |
| 99V57103002000 | Calibration Block-issue C | 1 | |
| 99V57200003000 | CALIBRATION BLOCK | 3 | |
| 99l57204062000 | AIRBUS A380 REFERENCE BLOCK ISB-8263 57-21-18 FIGURE 006. Includes Test Report and Certificate of Conformance. | 1 | |
| 9BD27804020001 | BLOCK-SLAT GAPPING | 1 | |
| 9C1446 | GAGE BLOCK,GO/NO-GO OUTER HANGER ADJUSTMENT | 1 | |
| 9C3124P14 | ALTERNATE CONVEX BLOCK | 2 | |
| A-3044 | CARBON BLOCK, ASSY | 6 | |
| A27022-23 | LOCK PIN BLOCK | 1 | |
| A27092-16 | POSITION BLOCK | 1 | |
| A27092-18 | POSITION BLOCK | 1 | |
| A27092-8 | POSITION BLOCK | 1 | |
| A27118-100 | Inbd block assy | 1 | |
| A27118-6 | INBD BLOCK | 1 | |
| A27118-94 | INBD BLOCK | 1 | |
| A27118-98 | INBD BLOCK | 1 | |
| A289A | ASSY Calibration Block Calibration Block | 1 | |
| A300-27-54-00-0258 | BLOCKING TOOL-FLAP CARRIAGE | 1 | |
| A32005-9 | Hinge Block | 1 | |
| A32099-12 | BLOCK-CENTER ASSY | 1 | |
| A32099-15 | BLOCK CENTER | 1 | |
| A330-92090-0001 | BOOM R/I NYLON BLOCK | 1 | |
| A330-92090-0003 | BOOM R/I NYLON BLOCK | 1 | |
| A330-93902-0001 | REFERENCE BLOCK | 1 | |
| A330-93905-0001 | CALIBRATION BLOCK | 1 | |
| A38003-20 | 767/787 TOILET UNBLOCK TOOL | 19 | |
| A38003-21 | TOILET UNBLOCKING TOOL | 10 | |
| A38003-30 | A38003-20 UNBLOCKER TOOL | 13 | |
| A38003-33 | SPRING-REMOVERBLOCKAGE(VAC. TOILET) | 2 | |
| A38003-34 | SPRING-REMOVERBLOCKAGE(VAC. TOILET) | 1 | |
| A38005-1 | TOILET DRAIN BLOCKAGE REM.TOOL | 5 | |
| A38005-7 | ROOTER WASTE DRAIN LINE BLOCKAGE REMOVAL | 2 | |
| A386 | Calibration Block | 2 | |
| A389A | Calibration Block | 3 | |
| A389B | Calibration Block | 2 | |
| A389C | Calibration Block | 2 | |
| A52036-24 | FITTING BLOCK | 1 | |
| A52036-26 | SHEAVE BLOCK -0 WELDMENT | 1 | |
| A52036-35 | PIN BLOCK | 1 | |
| A57003-2 | Inbd clamp block | 1 | |
| A6 | CALIBIRATION BLOCK | 1 | |
| A78015-1 | REWORK JIG - HINGE, BLOCKER DOORS, THRUST REVERSER (PRATT AND WHITNEY) | 3 | |
| A78021-5 | HOLDING BLOCK | 1 | |
| A8-AF-CAL-BLOCK | CALIBRATION CHECK BLOCK | 1 | |
| AB57001-VF8 | SLIPPER BLOCKREAR SPAR ATTACHMENT BRACKET-ACTUATOR | 1 | |
| AC21900100 | CONTROL-UNIT FOR THE ELECTRO-HYDRAULIC BLOCK | 1 | |
| AC21941200 | HYDRAULIC CONNECTING BLOCK | 2 | |
| ACTR9600-3 | CENTER T FITTING FOR BLOCK | 1 | |
| ACTUVINJKTB-2 | UV LIGHT CHARGING BLOCK | 1 | |
| ACT‐1‐30P6559500‐401 | NACA SCOOP BLOCKING PLUG | 1 | |
| AETL5652 | BLOCK-TRIMMING | 1 | |
| AETL5653 | BLOCK-ANGLE | 1 | |
| AF-5222 | FLEXIBLE ROTARY FLAT BOTTOM PROBE SPLIT END, EXPANDABLE FROM .187"-.205" WITH ADJUSTABLE COLLAR GUIDE BLOCK. 5.0" LONG STEEL 4 PIN FISCHER CONNECTOR 100KHz-2MHz. Includes Test Report and Certificate of Conformance | 1 | |
| AF-5222-1 | FLEXIBLE ROTARY FLAT BOTTOM PROBE SPLIT END, EXPANDABLE FROM .187"-.200" WITH ADJUSTABLE COLLAR GUIDE BLOCK. 5.0" LONG STEEL 4 PIN STEP LEMO CONNECTOR 100KHz-2MHz. Includes Test Report and Certificate of Conformance | 1 | |
| AFNDT-001/.08 | 2024-T351 ALUMINUM THICKNESS BLOCK 3.0" x 3.0" x .080". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-001/.25 | 2024-T351 ALUMINUM THICKNESS BLOCK 3.0" x 3.0" x .250". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-0212-1 | EDDY CURRENT SURFACE REFERENCE BLOCK. 2 EDM NOTCHES ( .012"D, .020"D, x .005" W +/- .001"), INCONEL 718. SIZE: 1.0"W x 3.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-032/10MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 10mm diameter hole. Corner EDM notch( 0.76mm long +/- 0.07 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1004CS | ARMY STRIKER THICKNESS BLOCK 3.0"L x 1.0"W x 7.31mm. THICK. MATERIAL: 4130 CARBON STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1006AL | CUSTOM 3 STEP CALIBRATION BLOCK 2024-T3 ALUMINUM, STEP SIZES 1.0" x 2.0" FACE. STEP THICKNESSES OF 0.100", 0.200" and 0.400" +/-.002". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1006CS | CUSTOM 3 STEP CALIBRATION BLOCK 4340 CARBON STEEL, STEP SIZES 1.0" x 2.0" FACE. STEP THICKNESSES OF 0.100", 0.200" and 0.400" +/-.002" PER DC-10 54-10-11 FIGURE 603 SHEET 43 PAGE 655. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1015 | EDDY CURRENT CALIBRATION BLOCK 2024-T351, WITH .020"Lx.005"W COUNTERSINK SURFACE EDM NOTCH IN EACH HOLE.0.190-0.194, countersink: 100 degrees, 0.3748-0.3819 diameter....0.203-0.207, countersink: 100 degrees, 0.3748-0.3819 diameter....0.2172-0.2182, co... | 1 | |
| AFNDT-1015-CALCS | CALIBRATION BLOCK 4140S. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1015-CALSS | CALIBRATION BLOCK 304SS. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1015-CS/MM | CUSTOM 4 STEP CALIBRATION BLOCKS CARBON STEEL , 54MM, 10MM, 15MM, 20MM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1015-INC625 | CALIBRATION STANDARD INCOLNEL BLOCK 625 5X1 OAL .10,.20,.30,.40,.50. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1015-SS/MM | CUSTOM 4 STEP CALIBRATION BLOCKS STAINLESS STEEL , 54MM, 10MM, 15MM, 20MM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1015/2024 | CUSTOM 4 STEP CALIBRATION BLOCK 2024-T3 ALUMINUM, STEP SIZES .75"x.75" FACE WITH STEP THICKNESSES OF .040",.060",.080",.100" +/-.001". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1030/10MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 10mm diameter hole. Midwall EDM notch( 9.5mm long +/- 0.95 )x ( 0.13mm deep +/- 0.01 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1030/12MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 12mm diameter hole. Midwall EDM notch( 9.5mm long +/- 0.95 )x ( 0.13mm deep +/- 0.01 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1030/6MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 6mm diameter hole. Midwall EDM notch( 9.5mm long +/- 0.95 )x ( 0.13mm deep +/- 0.01 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1030/8MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 8mm diameter hole. Midwall EDM notch( 9.5mm long +/- 0.95 )x ( 0.13mm deep +/- 0.01 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1031/10MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 10mm diameter hole. Midwall EDM notch( 1.5mm long +/- 0.15 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1031/12MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 12mm diameter hole. Midwall EDM notch( 1.5mm long +/- 0.15 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1031/6MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 6mm diameter hole. Midwall EDM notch( 1.5mm long +/- 0.15 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1031/8MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 8mm diameter hole. Midwall EDM notch( 1.5mm long +/- 0.15 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1032/10MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 10mm diameter hole. Corner EDM notch( 0.76mm long +/- 0.07 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1032/12MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 12mm diameter hole. Corner EDM notch( 0.76mm long +/- 0.07 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1032/6MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 6mm diameter hole. Corner EDM notch( 0.76mm long +/- 0.07 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1032/8MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 8mm diameter hole. Corner EDM notch( 0.76mm long +/- 0.07 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1060 | NON-PIPING CALIBRATION BLOCK, 3/4 X 6 1/4 X 12. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1061AL | EDDY CURRENT SURFACE BLOCK 7075-T6. 2 EDM SLOTS ( 0.2mm deep +/-0.05 & 0.12mm wide +/- 0.01),( 0.5mm deep +/- 0.01. Includes Certification Report and Certificate of Conformance. | 1 | |
| AFNDT-1061CS | EDDY CURRENT SURFACE BLOCK, 4130/4140 STEEL. 2 EDM SLOTS ( 0.2mm deep +/-0.05 & 0.12mm wide +/- 0.01),( 0.5mm deep +/- 0.01. Includes Certification Report and Certificate of Conformance. | 1 | |
| AFNDT-1062 | NON-PIPING CALIBRATION BLOCK FIGURE T-434.2.1 ASME SECTION V Article IV, 3" X 6 1/4" X 12". MATERIAL: 1018 CARBON STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1071/2024 | Custom Metric 6 Step Block. Step Thicknesses of 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm and 1.0mm. (Tolerance: +/- 0.02mm). Pad Size: 19mm X 19mm, (Tolerance: +/- 0.5mm) Material: 2024 Aluminum. Includes Certification Report for step thickness and Certific | 1 | |
| AFNDT-1071/304 | Custom Metric 6 Step Block. Step Thicknesses of 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm and 1.0mm. (Tolerance: +/- 0.02mm). Pad Size: 19mm X 19mm, (Tolerance: +/- 0.5mm) Material: 304 Stainless Steel. Includes Certification Report for step thickness and Ce | 1 | |
| AFNDT-1071/4340 | Custom Metric 6 Step Block. Step Thicknesses of 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm and 1.0mm. (Tolerance: +/- 0.02mm). Pad Size: 19mm X 19mm, (Tolerance: +/- 0.5mm) Material: 4340 CRES Steel. Includes Certification Report for step thickness and Certif | 1 | |
| AFNDT-1071/7075 | Custom Metric 6 Step Block. Step Thicknesses of 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm and 1.0mm. (Tolerance: +/- 0.02mm). Pad Size: 19mm X 19mm, (Tolerance: +/- 0.5mm) Material: 7075 Aluminum. Includes Certification Report for step thickness and Certific | 1 | |
| AFNDT-1071/INC | Custom Metric 6 Step Block. Step Thicknesses of 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm and 1.0mm. (Tolerance: +/- 0.02mm). Pad Size: 19mm X 19mm, (Tolerance: +/- 0.5mm) Material: 718 Inconel. Includes Certification Report for step thickness and Certificat | 1 | |
| AFNDT-1071/TI | Custom Metric 6 Step Block. Step Thicknesses of 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm and 1.0mm. (Tolerance: +/- 0.02mm). Pad Size: 19mm X 19mm, (Tolerance: +/- 0.5mm) Material: 6AL-4V Titanium. Includes Certification Report for step thickness and Certif | 1 | |
| AFNDT-1074-3 | EDDY CURRENT SURFACE BLOCK MADE OF 6AL-4V TITANIUM WITH 3 SURFACE NOTCHES ACROSS THE WIDTH OF THE BLOCK. .1mm X .005" MAX WIDTH and .2mm X .005" MAX WIDTH, .5MM X.005" MAX WIDTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1074/713 | Custom Metric 6 Step Block. Step Thicknesses of 0.5mm, 1mm, 3mm, 5mm, 7mm, 9mm. (Tolerance: +/- 0.02mm). Pad Size: 15mm X 15mm, (Tolerance: +/- 0.5mm) Material: 713 Inconel. Includes Certification Report for step thickness and COC of material used... | 1 | |
| AFNDT-1074/718 | Custom Metric 6 Step Block. Step Thicknesses of 0.5mm, 1mm, 3mm, 5mm, 7mm, 9mm. (Tolerance: +/- 0.02mm). Pad Size: 15mm X 15mm, (Tolerance: +/- 0.5mm) Material: 718 Inconel. Includes Certification Report for step thickness and COC of material used... | 1 | |
| AFNDT-1074/TI | Custom Metric 6 Step Block. Step Thicknesses of 0.5mm, 1mm, 3mm, 5mm, 7mm, 9mm. (Tolerance: +/- 0.02mm). Pad Size: 15mm X 15mm, (Tolerance: +/- 0.5mm) Material: 6AL-4V Titanium. Includes Certification Report for step thickness and COC of material ... | 1 | |
| AFNDT-1074AL | Custom Metric 6 Step Block. Step Thicknesses of 0.5mm, 1mm, 3mm, 5mm, 7mm, 9mm. (Tolerance: +/- 0.02mm). Pad Size: 15mm X 15mm, (Tolerance: +/- 0.5mm) Material: 7075-T6 Aluminum. Includes Certification Report for step thickness and COC of material... | 1 | |
| AFNDT-1075AL | ULTRASONIC TEST BLOCK .100/.500 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1075ST | ULTRASONIC TEST BLOCK .100/.500 STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1075TI | ULTRASONIC TEST BLOCK .100/.500 TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1076AL | ULTRASONIC STEP BLOCK .020", .050", .075", .100", .125" 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1076ST | ULTRASONIC STEP BLOCK .020", .050", .075", .100", .125" 4340 STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1076TI | ULTRASONIC STEP BLOCK .020", .050", .075", .100", .125" 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1076TI | TITANUM CALIBRATION BLOCK 0.020"-0.100 | 1 | |
| AFNDT-1096 15-5PH | 10 STEP REFERENCE BLOCK .025,.030,.040,.050,.063,.071,.080,.090,.100,.125 15-5PH. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1096/2024T3 | 10 STEP REFERENCE BLOCK .025,.030,.040,.050,.063,.071,.080,.090,100,.125 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1096/304SS | 9 STEP REFERENCE BLOCK WITH ACETAL(DELRIN) HOLDING BLOCK. MATERIAL: 304 STAINLESS STEEL. STEP SIZES: .020",.050",.080", .120", .160" , .200", .300", .500", .750" +/-.010". PAD SIZE = 1.0" x 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1096/6061AL | 9 STEP REFERENCE BLOCK WITH HOLDER. MATERIAL: 6061 ALUMINUM. STEP SIZES: .020",.050",.080", .120", .160" , .200", .300", .500", .750" +/-.010". PAD SIZE = 1.0" x 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1096/625 | 9 STEP REFERENCE BLOCK WITH ACETAL(DELRIN) HOLDING BLOCK. MATERIAL: 625 INCONEL. STEP SIZES: .020",.050",.080", .120", .160" , .200", .300", .500", .750" +/-.010". PAD SIZE = 1.0" x 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1096/6AL4V | 10 STEP REFERENCE BLOCK,.030,.040,.050,.063,.071,.080,.090,100,.120 6AL4V. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1096/718 | 9 STEP REFERENCE BLOCK WITH ACETAL(DELRIN) HOLDING BLOCK. MATERIAL: 625 INCONEL. STEP SIZES: .020",.050",.080", .120", .160" , .200", .300", .500", .750" +/-.010". PAD SIZE = 1.0" x 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2009AL | 5 STEP WEDGE, 16mm, 17mm, 18mm, 19mm, 20mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square. Includes Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2030INC | EDDY CURRENT SURFACE REFERENCE BLOCK, EDM NOTCHES ( .008", .020", .040" x .004" W +/- .002"), INCONEL 718. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2031/4340 | 7 STEP REFERENCE BLOCK ..STEP PAD SIZE: 1.0" X 1.0" MATERIAL: 4340 CRES STEEL. STEP RANGE:.040", .080", .160", .250", .300", .400", .500". +/-.001". Includes certification report traceable to NIST... | 1 | |
| AFNDT-2031/6AL-4V | 7 STEP REFERENCE BLOCK ..STEP PAD SIZE: 1.0" X 1.0" MATERIAL: 6AL-4V TITANIUM. STEP RANGE:.040", .080", .160", .250", .300", .400", .500" +/- .001". Includes certification report traceable to NIST... | 1 | |
| AFNDT-2031/7075 | 7 STEP REFERENCE BLOCK ..STEP PAD SIZE: 1.0" X 1.0" MATERIAL: 7075-T6 ALUMINUM. STEP RANGE:.040", .080", .160", .250", .300", .400", .500" +/- .001". Includes certification report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2032/Al | 5 STEP REFERENCE BLOCK ..STEP SIZES 1.0" X 1.0" 7075-T6 ALUMINUM. (400",.450",.500",.550",.600"). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2032/SS | 5 STEP REFERENCE BLOCK ..STEP SIZES 1.0" X 1.0" 304 STAINLESS.(400",.450",.500",.550",.600")... Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2032/Ti | 5 STEP REFERENCE BLOCK ..STEP SIZES 1.0" X 1.0" 6AL-4V Ti.(400",.450",.500",.550",.600"). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2037/7075T6 | 10 STEP WEDGE SUPPLIED WITH HOLDING BLOCK. STEP SIZES: .040", .080", .120", .160", .200", .240", .280", .320", .360", .400" +/-.001". Material: 7075-T6 ALUMINUM. PAD SIZE: .75" x .75". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2038AL | EDDY CURRENT CALIBRATION BLOCK 2024-T351, WITH .020"Lx.005"W COUNTERSINK SURFACE EDM NOTCH IN EACH HOLE. HOLE SIZES: .156"Ø and .187"Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2050AL | BLOCK-MINI-ANGLE-BEAM | 1 | |
| AFNDT-2055 | CUSTOM ROTARY BLOCK REFERENCE STANDARD. 10MM, 13MM, 15MM, 17MM , 19MM, .020X.020X.004 +/-.001, ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2056 | CUSTOM CALIBRATION BLOCK, THREE SURFACE NOTCHES .008" , .020" , .040" SS. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2058/7075T6 | 6 STEP CALIBRATION BLOCK, CUSTOM, .030", .040", 0.60" , 0.80", .100", .150", 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2062AL | Custom 10 Step Block, 2.0mm, 4.0mm, 6.0mm, 8.0mm, 10.0mm, 12.0mm, 14.0mm, 16.0mm, 18.0mm and 20.0mm, Thickness Tolerance ±.05mm. Pad Size: 19mm X 19mm. Material: 7075-T6 Aluminum. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-2062CS | Custom 10 Step Block, 2.0mm, 4.0mm, 6.0mm, 8.0mm, 10.0mm, 12.0mm, 14.0mm, 16.0mm, 18.0mm and 20.0mm, Thickness Tolerance ±.05mm. Pad Size: 19mm X 19mm. Material: 1018 Carbon Steel. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-2062SS | Custom 10 Step Block, 2.0mm, 4.0mm, 6.0mm, 8.0mm, 10.0mm, 12.0mm, 14.0mm, 16.0mm, 18.0mm and 20.0mm, Thickness Tolerance ±.05mm. Pad Size: 19mm X 19mm. Material: 304 Stainless Steel. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-2062TI | BLOCK PAD TOOLING | 1 | |
| AFNDT-2062Ti | Step Block, 2.0mm, 4.0mm, 6.0mm, 8.0mm, 10.0mm, 12.0mm, 14.0mm, 16.0mm, 18.0mm and 20.0mm, Thickness Tolerance ±.02mm. Pad Size: .75” x .75”. Material: 6AL-4v Titanium. Includes Certification Traceable to NIST. | 1 | |
| AFNDT-2075/1018 | 5 STEP WEDGE .020", .040", .060", .080", .100". TOLERANCE +/-.001". MATERIAL: 4340 or 4130 CARBON STEEL . PAD SIZE:75"x.75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2075/AL-1 | 5 STEP WEDGE .020", .040", .060", .080", .100". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2075/AL-2 | 5 STEP WEDGE .020", .040", .060", .080", .100". TOLERANCE +/-.001". MATERIAL: 2024-T3 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2075/INC | 5 STEP WEDGE .020", .040", .060", .080", .100". TOLERANCE +/-.001". MATERIAL: 718 INCONEL. PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2075/TI | 5 STEP WEDGE .020", .040", .060", .080", .100". TOLERANCE +/-.001". MATERIAL: 6AL-4V TITANIUM . PAD SIZE: 75" x .75" .Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2075CS | 5 STEP WEDGE .020", .040", .060", .080", .100". TOLERANCE +/-.001". MATERIAL: 4340 CARBON STEEL . PAD SIZE:75"x.75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2075SS | 5 STEP WEDGE .020", .040", .060", .080", .100". TOLERANCE +/-.001". MATERIAL: 304 STAINLESS. PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2079/2024T3 | 6 STEP CALIBRATION BLOCK, STEP SIZES .030", .100", .250", .500", .750", 1.0" in 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2080/AL | MINI ANGLE BEAM BLOCK ALUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2081 | CUSTOM BOLT HOLE BLOCK, 7075-T6, 1/4" THICK, 3 SURFACE NOTCHES .008 / .020 / .040 DEEP, .020 THRU NOTCH FOR EACH HOLE, HOLE Ø 15/32, 1/2 , 9/16 , 5/8, 11/16, 3/4, 1/8, 7/16, 13/32, 3/8, 11/32, 5/16, 9/32, 1/4, 7/32, 3/16, 5/32, 7/8. Includes Test Report a | 1 | |
| AFNDT-2082 | CUSTOM FOUR STEP BLOCK, 2205SS, 5.0MM, 10.0MM, 15.0MM, 20.0MM. 3/4"X3/4". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2084 | CUSTOM 3 STEP BLOCK, CARBON STEEL, 1 1/8X5X1.75. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2085/7075-T6 | 6 STEP CALIBRATION BLOCK,STEP SIZES 1.0" X1.0"(500",.600",.700",.800",.900" and 1.0") +/- .001" 7075-T6 ALUMINUM . Includes certification Report Traceable to NIST, Meets tolerance for ASTM E797... Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2086CS | 4 STEP CALIBRATION BLOCK. STEP SIZES: .050", .075", .100", .125" ±.001, 3/4" X 3/4" PAD SIZE. MATERIAL: 1018 CARBON STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2086SS | 4 STEP CALIBRATION BLOCK. STEP SIZES: .050", .075", .100", .125" ±.001, 3/4" X 3/4" PAD SIZE. MATERIAL: 304 STAINLESS STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2087/CS | 5 STEP CALIBRATION BLOCK, .100, .200, .300, .400, .500, ± .001, 3/4X3/4 FACE, CARBON STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2087/SS | 5 STEP CALIBRATION BLOCK, .100, .200, .300, .400, .500, ± .001, 3/4X3/4 FACE, STAINLESS STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2088/2024-T3 | METRIC 10 STEP CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 20mm X 20mm. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2088/304SS | METRIC 10 STEP CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 20mm X 20mm. Material: 304 Stainless Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2088/6AL-4V | METRIC 10 STEP CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 20mm X 20mm. Material: 6AL-4V Titanium. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2088/7075-T6 | METRIC 10 STEP CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 20mm X 20mm. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2088CS | METRIC 10 STEP CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 20mm X 20mm. Material: 4340 Carbon Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2090AL | 5 STEP WEDGE, 11mm, 12mm, 13mm, 14mm, 15mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square. Includes Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2091/AL | 6 STEP CALIBRATION BLOCK, CUSTOM, .040, .080, .160 , .250, .300, .400, 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2091/MAG | 5 STEP CALIBRATION BLOCK, STEP THICKNESSES: .050, .100, .150 , .200, .250. STEP PAD SIZE: 1.0" x 1.0", MATERIAL: MAGNASESIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2091/S | 6 STEP CALIBRATION BLOCK, CUSTOM, .040, .080, .160 , .250, .300, .400, 4340 STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2091/SS | 6 STEP CALIBRATION BLOCK, CUSTOM, .040, .080, .160 , .250, .300, .400, 300 STAINLESS STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2091/TI | 6 STEP CALIBRATION BLOCK, CUSTOM, .040, .080, .160 , .250, .300, .400, 6AL-4V. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2093/7075-T6 | 5 STEP CALIBRATION BLOCK,STEP SIZES 1.0" X1.0"(1.100", 1.200", 1.300", 1.400", 1.500" ) +/- .001" 7075-T6 ALUMINUM. Includes certification Report Traceable to NIST, Meets tolerance for ASTM E797 | 1 | |
| AFNDT-2098/7175 | ALUMINUM CALIBRATION BLOCK 2.5MM-12.5MM | 1 | |
| AFNDT-2100TI | 6-STEP TITANIUM BLOCK (1MM - 10MM) | 1 | |
| AFNDT-2103AL | METRIC 5 STEP CALIBRATION BLOCK, 7075-T6 ALUMINUM. STEP SIZES: 2.5mm, 5.0mm, 7.5mm, 10.0mm, 12.5mm. PAD SIZE: 1.0" x 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2103CS | METRIC 5 STEP CALIBRATION BLOCK, 1018 CARBON STEEL. STEP SIZES: 2.5mm, 5.0mm, 7.5mm, 10.0mm, 12.5mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2103SS | METRIC 5 STEP CALIBRATION BLOCK, 304 STAINLESS STEEL. STEP SIZES: 2.5mm, 5.0mm, 7.5mm, 10.0mm, 12.5mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2105/360 | 5 STEP BLOCK, .100, .250, .500, .750, 1.00. 360BRASS, 3/4X3/4 STEP SIZE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2105/6061 | 5 STEP BLOCK, .100, .250, .500, .750, 1.00. 6061 ALUMINUM, 3/4X3/4 STEP SIZE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2105/COP | 5 STEP BLOCK, .100, .250, .500, .750, 1.00. COPPER, 3/4X3/4 STEP SIZE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2112 | CUSTOM EC CORROSION EVALUATION BLOCK ART72 FIG 617. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2114AL | EDDY CURRENT SURFACE REFERENCE STANDARD, EDM NOTCHES .008", .020", .040" (.006W +/- .001). BLOCK SIZE:3.156 "L x 1.375"W x .312"H. MATERIAL: 2024-T3 ALUMINUM.. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2115 | 10 STEP REFERENCE BLOCK .025", .030", .040", .050", .063", .071", .080", .090", .100", .120" +/-.001" 2024-T6 ALUMINUM .75" x .75" STEP PAD. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2118 | CUSTOM 6 STEP BLOCK, 0.5mm, 1mm,2mm, 3mm, 4mm, 5mm +/- .05mm . Pad Size: .750" x .750" Material- 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2119AL | 5 STEP WEDGE, 11mm, 12mm, 13mm, 14mm, 15mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square. Includes Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2120 | CUSTOM EDDY CURRENT BLOCK, 4340, 4X1X.250, EDM .2MM, .5MM, 1.0MM X .005±.002. ADD.003 NON-CONDUCTIVE SHIMS. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2129CS | LEONDRO CALIBRATION BLOCK PAGE 18 FIGURE 3 S.B. N°169-165. 2 STEP BLOCK, MATERIAL: LOW CARBON STEEL SUCH AS 1018, 4130 or 4340. Step Size: 2-3mm and 10-11mm. ±.0.1mm, PAD SIZE: 20mm X 20mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2131 | CUSTOM 6 STEP BLOCK : (1mm, 2mm, 4mm, 6mm, 8mm, 10mm, +/- .05mm thick. total of 6 steps. Material- 2024-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2157AL | 10 STEP REFERENCE BLOCK .025", .030", .040", .050", .063", .071", .080", .090", .100", .120" +/-.001" 7075-T6 ALUMINUM .75" x .75" STEP PAD. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2160/19MM | Custom ASME ultrasonic phased array PAUT Calibration Block per customer supplied drawing. 270mm x 150mm x 19mm. Material: 1018 Carbon Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2160/38MM | Custom ASME ultrasonic phased array PAUT Calibration Block per customer supplied drawing. 330mm x 150mm x 38mm. Material: 1018 Carbon Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3001 | Embraer 170 reference standard with a .473" diameter hole. Per NDTM PT1 51-00-00-916-802-A , 1.4mm x 1.4mm +/-.05mm long x 0.1mm +/-.05 wide corner EDM notch. Material: 7050-T7 Aluminum. Block size 2.0" x 2.0" x .375". Includes Test Report and Certifica | 1 | |
| AFNDT-3010/7075-T6 | METRIC 10 STEP CALIBRATION BLOCK, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm ± .05mm. Pad Size: 20mm X 20mm. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3013AL-1 | Metric 6 Step Wedge, 0.5mm, 1mm, 2mm, 3mm, 4mm, 5mm, +/- .05mm. Material: 2024-T3 Aluminum Supplied with Delrin Holding Block. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3014AL-1 | 8 STEP BLOCK - 2 UNIT - AL BLOCK CONSIST OF 8 DIFFERENT THICKNESS (1MM, 2MM, 3MM, 4MM, 5MM, 6MM, 7MM, 8MM)AS BELOW. - MATERIAL AL2024 | 1 | |
| AFNDT-3021AL | Custom Metric 6 Step Block. Step Thicknesses of 0.5mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm. (Tolerance: +/- 0.2mm). Pad Size: 15mm X 15mm, (Tolerance: +/- 0.5mm) Material: 2024-T3 Aluminum. Includes Certification Report and Certificate of Conformance. | 1 | |
| AFNDT-3024SS | 304 STAINLESS STEEL AWS RESOLUTION BLOCK 1.0" x 3.0" x 6.0". WITH A QUANTITY OF (9) .062" DIAMETER HOLES.. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3025AL | Eddy Current Surface Standard 7075-T6 Aluminum. Block Size: 4.0"(101.6mm)L x 1.0"(25.4mm)W x .25"(6.35mm)H. Includes 3 EDM Flaws of the following sizes...1.) (0.5mm)D x (0.25mm)W x (25mm)L..2.) (1.0mm)D x (0.25mm)W x (25mm)L..3.) (2.0mm)D x (0.25mm)W x... | 1 | |
| AFNDT-3025CS | Eddy Current Surface Standard 4340 Carbon Steel. Block Size: 4.0"(101.6mm)L x 1.0"(25.4mm)W x .25"(6.35mm)H. Includes 3 EDM Flaws of the following sizes...1.) (0.5mm)D x (0.25mm)W x (25mm)L..2.) (1.0mm)D x (0.25mm)W x (25mm)L..3.) (2.0mm)D x (0.25mm)W ... | 1 | |
| AFNDT-3025INC | Eddy Current Surface Standard 718 Inconel. Block Size: 4.0"(101.6mm)L x 1.0"(25.4mm)W x .25"(6.35mm)H. Includes 3 EDM Flaws of the following sizes...1.) (0.5mm)D x (0.25mm)W x (25mm)L..2.) (1.0mm)D x (0.25mm)W x (25mm)L..3.) (2.0mm)D x (0.25mm)W x (25m... | 1 | |
| AFNDT-3025SS | Eddy Current Surface Standard 304 Stainless Steel. Block Size: 4.0"(101.6mm)L x 1.0"(25.4mm)W x .25"(6.35mm)H. Includes 3 EDM Flaws of the following sizes...1.) (0.5mm)D x (0.25mm)W x (25mm)L..2.) (1.0mm)D x (0.25mm)W x (25mm)L..3.) (2.0mm)D x (0.25mm)... | 1 | |
| AFNDT-3025TI | Eddy Current Surface Standard 6AL-4V Titanium. Block Size: 4.0"(101.6mm)L x 1.0"(25.4mm)W x .25"(6.35mm)H. Includes 3 EDM Flaws of the following sizes...1.) (0.5mm)D x (0.25mm)W x (25mm)L..2.) (1.0mm)D x (0.25mm)W x (25mm)L..3.) (2.0mm)D x (0.25mm)W x ... | 1 | |
| AFNDT-3039 | CUSTOM SURFACE CALIBRATION BLOCK. MATERIAL: 7075-T73 ALUMINUM. EDM NOTCH SIZE: 1.52mm(.060") LONG x 0.13mm(.0051") WIDE x 0.76mm(.030") DEEP. +/- .05mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3045-2024T3 | 10 STEP REFERENCE BLOCK .010", .020", .030", .040", .050", .060", .070", .080", .090", .100", +/-.001" . Material: 7075-T6 ALUMINUM, Pad Size: .75" x 75" with Acetal( Delrin) holding block . Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3045-7075T6 | 10 STEP REFERENCE BLOCK .010", .020", .030", .040", .050", .060", .070", .080", .090", .100", +/-.001" . Material: 7075-T6 ALUMINUM, Pad Size: .75" x 75" with Acetal( Delrin) holding block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3045/1018 | 10 STEP REFERENCE BLOCK, Step Pad Thicknesses: .010", .020", .030", .040", .050", .060", .070", .080", .090", .100", +/-.001" . Material: 1018 Steel, Pad Size: .75" x 75" with Acetal( Delrin) holding block. Includes Test Report and Certificate of Confo | 1 | |
| AFNDT-304AWSDS | DISTANCE / SENSITIVITY (DS) CALIBRATION BLOCK 304 STAINLESS STEEL AWS type DS | 1 | |
| AFNDT-3062/13-8PH | 8 STEP CALIBRATION BLOCK, PAD SIZE 1.0" x1.0", STEP SIZE: .250", .400", .600", .800", 1.00" +/- .010" 13-8PH STAINLESS STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3062/15-5PH | 5 STEP CALIBRATION BLOCK, PAD SIZE 1.0" x1.0", STEP SIZE: .250", .400", .600", .800", 1.00" +/- .010" 15-5PH STAINLESS STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3062/17-4PH | 5 STEP CALIBRATION BLOCK, PAD SIZE 1.0" x1.0", STEP SIZE: .250", .400", .600", .800", 1.00" +/- .010" 17-4PH STAINLESS STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3063/13-8PH | 5 STEP CALIBRATION BLOCK, INCLUDES ACETAL(DELRIN) HOLDING BLOCK. PAD SIZE 1.0" x1.0", STEP SIZE: .020", .040", .060", .080", .100", .150, .200, .300 +/- .010" 13-8PH STAINLESS STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3063/15-5PH | 8 STEP CALIBRATION BLOCK, INCLUDES ACETAL(DELRIN) HOLDING BLOCK. PAD SIZE 1.0" x1.0", STEP SIZE: .020", .040", .060", .080", .100", .150, .200, .300 +/- .010" 15-5PH STAINLESS STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3063/17-4PH | 8 STEP CALIBRATION BLOCK, INCLUDES ACETAL(DELRIN) HOLDING BLOCK. PAD SIZE 1.0" x1.0", STEP SIZE: .020", .040", .060", .080", .100", .150, .200, .300 +/- .010" 17-4PH STAINLESS STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3064/2024AL | 7 STEP REFERENCE BLOCK WITH ACETAL( DELRIN ) HOLDING BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 2024-T3 ALUMINUM. STEP RANGE:.020", .040", .060", .080", .100", .150", .200" +/- .002". Includes certification report traceable to NIST. | 1 | |
| AFNDT-3064/6061AL | 7 STEP REFERENCE BLOCK WITH ACETAL( DELRIN ) HOLDING BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 6061-T6 ALUMINUM. STEP RANGE:.020", .040", .060", .080", .100", .150", .200" +/- .002". Includes certification report traceable to NIST. | 1 | |
| AFNDT-3064/7075AL | 7 STEP REFERENCE BLOCK WITH ACETAL( DELRIN ) HOLDING BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 7075-T6 ALUMINUM. STEP RANGE:.020", .040", .060", .080", .100", .150", .200" +/- .002". Includes certification report traceable to NIST. | 1 | |
| AFNDT-3065/2024AL | 6 STEP REFERENCE BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 2024-T3 ALUMINUM. STEP RANGE:.100", .250", .400", .600", .800", 1.00" +/- .002". Includes certification report traceable to NIST. | 1 | |
| AFNDT-3065/6061AL | 6 STEP REFERENCE BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 6061-T6 ALUMINUM. STEP RANGE:.100", .250", .400", .600", .800", 1.00" +/- .002". Includes certification report traceable to NIST. | 1 | |
| AFNDT-3065/7075AL | 6 STEP REFERENCE BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 7075-T6 ALUMINUM. STEP RANGE:.100", .250", .400", .600", .800", 1.00" +/- .002". Includes certification report traceable to NIST. | 1 | |
| AFNDT-3066/4130 | 5 STEP REFERENCE BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 4130 STEEL. STEP RANGE: .200", .400", .600", .800", 1.00" +/- .002". Includes certification report traceable to NIST. | 1 | |
| AFNDT-3066/6AL4V | 5 STEP REFERENCE BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 6AL-4V TITANIUM. STEP RANGE: .200", .400", .600", .800", 1.00" +/- .002". Includes certification report traceable to NIST. | 1 | |
| AFNDT-3067/15-5PH | 8 STEP CALIBRATION BLOCK, INCLUDES ACETAL(DELRIN) HOLDING BLOCK. PAD SIZE 1.0" x1.0", STEP SIZE: .015", .030", .050", .080", .120", .160, .200, .300 +/- .005" Material: 15-5PH STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3067/6AL4V | 8 STEP CALIBRATION BLOCK, INCLUDES ACETAL(DELRIN) HOLDING BLOCK. PAD SIZE 1.0" x1.0", STEP SIZE: .015", .030", .050", .080", .120", .160, .200, .300 +/- .005" 15-5PH STAINLESS STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3068/4130 | 7 STEP REFERENCE BLOCK WITH ACETAL( DELRIN ) HOLDING BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 4130 STEEL. STEP RANGE:.020", .050", .080", .120", .160", .200", .300" +/- .010". Includes certification report traceable to NIST. | 1 | |
| AFNDT-3106TI | 7 STEP CALIBRATION BLOCK. MATERIAL: 6AL-4V TITANIUM. STEP THICKNESS: 0.035", 0.070", 0.105", 0.140", 0.175", .210" 0.250" +/- .001". STEP PAD SIZE: .75" x .75". Includes certification Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3108CS | CUSTOM 7 STEP BLOCK, 0.5mm, 1mm,2mm, 3mm, 4mm, 5mm, 6mm +/- .05mm . Pad Size: .750" x .750" Material- 4340 Carbon Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3108TI | CUSTOM 7 STEP BLOCK, 0.5mm, 1mm,2mm, 3mm, 4mm, 5mm, 6mm +/- .05mm . Pad Size: .750" x .750" Material- 6AL-4V Titaniuml. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3119AL | Aluminum Dynamic Split Hole Reference Block. Material: 7075-T651 aluminum. 16 Holes with 1/16" Cross Drilled Holes on both sides. Hole Sizes: 4.5mm, 5.0mm, 6.0mm, 6.5mm, 7.0mm, 7.5mm, 8.0mm, 9.0mm, 10mm, 12mm, 14mm, 16mm, 20mm, 22mm, 24mm. Tolerance +/... | 1 | |
| AFNDT-3119TI | Titanium Dynamic Split Hole Reference Block. Material: 6Al-4v Titanium. 16 Holes with 1/16" Cross Drilled Holes on both sides. Hole Sizes: 4.5mm, 5.0mm, 6.0mm, 6.5mm, 7.0mm, 7.5mm, 8.0mm, 9.0mm, 10mm, 12mm, 14mm, 16mm, 20mm, 22mm, 24mm. Tolerance +/- .... | 1 | |
| AFNDT-3123AL | 7 STEP REFERENCE BLOCK ..STEP PAD SIZE: 1.0" X 1.0" MATERIAL: 2024-T3 ALUMINUM. STEP RANGE:.030", .040", .050", .0600", .070", .080", .090" +/- .001". Includes certification report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3124/316L | Custom Ultrasonic Calibration Block. Material: 316L Stainless Steel. Size: 6.0" x 1.5" x 5mm Thick. EDM slot depths 0.118"(0.3mm), .0197"(0.5mm), .0394"(1.0mm), .0787"(2.0mm), .0984"(2.5mm) x .005"W +/-.001"Wide. Includes Test Report and Certificate of Co | 1 | |
| AFNDT-3124/6061 | Custom Ultrasonic Calibration Block. Material: 6061 Al. Size: 6.0" x 1.5" x 5mm Thick. EDM slot depths 0.118"(0.3mm), .0197"(0.5mm), .0394"(1.0mm), .0787"(2.0mm), .0984"(2.5mm) x .005"W +/-.001"Wide. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3138MAG | 7 STEP REFERENCE BLOCK. MATERIAL: MAGNESIUM STEP PAD SIZE: .75" X .75". STEP RANGE:.040", .080", .160", .250", .300", .400", .500" +/- .001". Includes certification report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3142AL | CUSTOM 4 STEP REFERENCE BLOCK. MATERIAL: 7075-T6. STEP SIZE .0100",.400",.700", 1.00" +/-.001. PAD SIZE: 1"X4". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3152SS | 5 Step Wedge Manufactured in Accordance with ASTM E797/E797M-15.Step Sizes: .100", .200",. 350", .500", 1.000" MATERIAL: 304 Stainless Steel. Pad Size: 0.750" X 0.750" TOLEREANCE = +/- .002. Includes measurement Certification for the .750" Block wi... | 1 | |
| AFNDT-3154CS | Eddy Current Surface Standard Carbon Steel. 0.5mm, 1.0mm,2.0mm Deep x .15mm Wide +/- .05mm. Block Size: 5.0"(127mm)L x 2.0"(50.8mm)W x .25"(6.35mm). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3154SS | Eddy Current Surface Standard 316 Steel. 0.5mm, 1.0mm,2.0mm Deep x .15mm Wide +/- .05mm. Block Size: 5.0"(127mm)L x 2.0"(50.8mm)W x .25"(6.35mm). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3157 | Liquid Penetrant Standard. Meets the ASME Boiler Pressure Code, Section V & III, and MIL-I-23135-C. The cracked aluminum block is made from 2024 aluminum and is 3” x 2” x 3/8” thick. A 1/8" wide groove separates the blocks two sides to facilitate side-... | 1 | |
| AFNDT-3161/321S | 6 STEP REFERENCE BLOCK WITH HOLDER. MATERIAL: 321 CRES STEEL. STEP SIZES: .008",.020",.050", .080", .100" , .125" +/-.005". PAD SIZE = 1.0" x 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3161/INC | 6 STEP REFERENCE BLOCK WITH HOLDER. MATERIAL: INCONEL. STEP SIZES: .008",.020",.050", .080", .100" , .125" +/-.005". PAD SIZE = 1.0" x 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3166 | CUSTOM 2 HOLE REFERENCE STANDARD. MATERIAL: 718 INCONEL, BLOCK SIZE: .500" x 1.0" x 4.0" . HOLE SIZES: 5/16", 9/32" WITH -3( .030" x .060" x .005" W MID-WALL NOTCH ' | 1 | |
| AFNDT-3175AL | 8 Step Calibration Block, Material 7075-T6 Aluminum. Steps: 0.5mm, 1mm, 2mm, 3mm, 4mm, 5mm, 7mm, 9mm. (Tolerance: +/-0.02mm)...- Pad Size: 19mm x 19mm (Tolerance: +/- 0.5mm)...- Surface Finish: Ra 0.8 µm (32 µin) max...- Includes Certification Report a... | 1 | |
| AFNDT-3175CS | 8 Step Calibration Block, Material 1018 Steel. Steps: 0.5mm, 1mm, 2mm, 3mm, 4mm, 5mm, 7mm, 9mm. (Tolerance: +/-0.02mm)...- Pad Size: 19mm x 19mm (Tolerance: +/- 0.5mm)...- Surface Finish: Ra 0.8 µm (32 µin) max...- Includes Certification Report and Cer... | 1 | |
| AFNDT-3175TI | 8 Step Calibration Block, Material 6AL-4V Titanium. Steps: 0.5mm, 1mm, 2mm, 3mm, 4mm, 5mm, 7mm, 9mm. (Tolerance: +/-0.02mm)...- Pad Size: 19mm x 19mm (Tolerance: +/- 0.5mm)...- Surface Finish: Ra 0.8 µm (32 µin) max...- Includes Certification Report an... | 1 | |
| AFNDT-3181AL | 8 Step Calibration Block, Material 2024-T3 Aluminum. Step Sizes: 0.5mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 5.0mm, 7.5mm, 10mm. (Tolerance: +/-0.02mm).- Pad Size: 20mm x 20mm (Tolerance: +/- 0.5mm). Includes Certification Report and Certificate of Conformance. | 1 | |
| AFNDT-3187AL | METRIC 10 STEP CALIBRATION BLOCK, 0.6mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm ± .05mm. Pad Size: 20mm X 20mm. Per Airbus Procedure A 51-10-04. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3187TI | METRIC 10 STEP CALIBRATION BLOCK, 0.6mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm ± .05mm. Pad Size: 20mm X 20mm. Material: 6AL-4V Titanium. Per Airbus Procedure A 51-10-04. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3192AL | 10 STEP REFERENCE BLOCK .020", .040", .060", .080", .100", .120", .140", .160", .180", .200" +/-.001" 7075-T6 ALUMINUM .75" x .75" STEP PAD With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3193AL | 10 STEP REFERENCE BLOCK .020", .040", .060", .080", .100", .120", .140", .160", .180", .200" +/-.001" 2024-T3 ALUMINUM .75" x .75" STEP PAD With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3194TI | 10 STEP REFERENCE BLOCK .020", .040", .060", .080", .100", .120", .140", .160", .180", .200" +/-.001" 6AL-4V TITANIUM .75" x .75" STEP PAD With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3195S | 10 STEP REFERENCE BLOCK .020", .040", .060", .080", .100", .120", .140", .160", .180", .200" +/-.001" CARBON STEEL .75" x .75" STEP PAD With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3199AL | 7 STEP REFERENCE BLOCK. STEP SIZES: .025",.040", .063", .071", .100",.125",.200" +/-.001". MATERIAL: 2024-T6 ALUMINUM. PAD SIZE: .75"x.75" .Includes Test Report and Certificate of Conformance | 1 | |
| AFNDT-3200/321 | 7 STEP CALIBRATION BLOCK. STEP SIZES: .020", .040", .060", .080", .100", .150", and .200" +/- .010". PAD SIZE: 1.0" x 1.0", MATERIAL: 321 CRES. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3201A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 11.3mm(.445")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3201CS | 4 STEP CALIBRATION BLOCK. STEP SIZES: .250", .500", .750", 1.00" ±.002, 3/4" X 3/4" PAD SIZE. MATERIAL: 1018 CARBON STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3202A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 14.3mm(.563")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3203A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 15.1mm(.594")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3204A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 15.9mm(.626")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3205A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 16.0mm(.630")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3206A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 16.3mm(.642")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3207A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 16.7mm(.657")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3207CS | 5 Step Block. Material: 1018 Steel. Steps: 0.45mm, 0.50mm, 1.0mm, 2.5mm, 5.0mm. Tolerance: ± 0.02mm. Pad Size: 15.0mm x 15.0mm. Tolerance: ± 0.5mm. Surface Finish: Ra 0.8 µm (32 µin.) max. Supplied with Delrin Holding Block. Includes Test Report and Certi | 1 | |
| AFNDT-3208A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 17.5mm(.689")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3209A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 19.3mm(.760")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3226AL | Custom Metric 6 Step Block. Step Thicknesses of 2mm, 4mm, 6mm, 8mm, 10mm, 12.5mm. (Tolerance: +/- 0.02mm). Pad Size: 20mm x 20mm. Material: 7075-T6 ALUMINUM. Includes Certification Report for step thickness and Certificate of Conformance. | 1 | |
| AFNDT-3227/7175 | Custom Metric 7 Step Block. Step Thicknesses of 12.5mm, 14mm, 16mm, 18mm, 20mm, 22.mm, 25mm. (Tolerance: +/- 0.02mm). Pad Size: 19mm x 19mm. Material: 7175-T73 ALUMINUM. Includes Certification Report for step thickness and Certificate of Conformance. | 1 | |
| AFNDT-3227AL | Custom Metric 7 Step Block. Step Thicknesses of 12.5mm, 14mm, 16mm, 18mm, 20mm, 22.mm, 25mm. (Tolerance: +/- 0.02mm). Pad Size: 19mm x 19mm. Material: 7075-T6 ALUMINUM. Includes Certification Report for step thickness and Certificate of Conformance. | 1 | |
| AFNDT-3230A | Custom Bolt Hole Calibration Block, 2024-T3 Aluminum. Hole Diameter 5/16" (.312")Ø Contains one EDM Corner Notch .050" x .050" +/- .001", and one EDM Surface Notch .750" long x .020 deep +/- .001 . Block Size = 2.0" x 2.0" x .25". Includes Test Rep... | 1 | |
| AFNDT-3236CS | Custom Thin 4-Step Calibration Block, 1018 Carbon Steel (0.040, 0.060, 0.080 and 0.100"). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3236SS | Custom Thin 4-Step Calibration Block, 304 Stainless Steel (0.040, 0.060, 0.080 and 0.100"). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3237AL | Custom Thin 8-Step Calibration Block, 7075 Aluminum (.030, .040, .050, .060, .070, .080, .090 .100"). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3243AL | 8 STEP WEDGE, 2mm, 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm +/- .05mm. Material: 2024-T3 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3244AL | 8 STEP WEDGE, 2mm, 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3245AL | 8 STEP WEDGE, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm +/- .05mm. Material: 2024-T3 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3246AL | 8 STEP WEDGE, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3248AL | Custom Metric 6 Step Block. Step Thicknesses of 0.4mm, 0.7mm, 1.0mm, 1.3mm, 1.6mm, 2.0mm. (Tolerance: +/- 0.05mm). Pad Size: 15mm X 15mm, (Tolerance: +/- 0.5mm) Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3252AL | 9 STEP THICKNESS STANDARD. STEP SIZES: .015", .025", .035", .045", .055", .065", .075", .085", .095" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075-T6 ALUMINUM.Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certifica | 1 | |
| AFNDT-3252CS | 9 STEP THICKNESS STANDARD. STEP SIZES: .015", .025", .035", .045", .055", .065", .075", .085", .095" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 4340 or 4130 Carbon Steel.Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and | 1 | |
| AFNDT-3252TI | 9 STEP THICKNESS STANDARD. STEP SIZES: .015", .025", .035", .045", .055", .065", .075", .085", .095" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 6AL-4V TITANIUM. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certifica | 1 | |
| AFNDT-3253AL | 9 STEP WEDGE, 0.38mm, 0.64mm, 0.89mm, 1.14mm, 1.40mm, 1.65mm, 1.91mm, 2.16mm, 2.41mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Confo | 1 | |
| AFNDT-3253CS | 9 STEP WEDGE, 0.38mm, 0.64mm, 0.89mm, 1.14mm, 1.40mm, 1.65mm, 1.91mm, 2.16mm, 2.41mm +/- .05mm. Material: 4340 or 4130 Carbon Steel. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate | 1 | |
| AFNDT-3253TI | 9 STEP WEDGE, 0.38mm, 0.64mm, 0.89mm, 1.14mm, 1.40mm, 1.65mm, 1.91mm, 2.16mm, 2.41mm +/- .05mm. Material: 6Al-4v Titanium. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Confor | 1 | |
| AFNDT-3254AL | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameters = 2 Holes 22.23mm(.875")Ø, and 25.4mm(1.0")Ø. EDM Flaws:.030" x .030" x .005" +/- .001" Corner EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Con | 1 | |
| AFNDT-3275 | Custom Metric 7 Step Block Per ASTM E797/E797M-15. Step Thicknesses of .50mm, 1.00mm, 2.00mm, 4.00mm, 6.00mm, 8.00mm, 10.00mm. (Tolerance: +/- 0.02mm). Pad Size: 20mm x 20mm. Material: 7075-T6 ALUMINUM. Includes Certification Report for step thickness | 1 | |
| AFNDT-3276 | Custom Metric 7 Step Block Per ASTM E797/E797M-15. Step Thicknesses of .50mm, 1.00mm, 2.00mm, 4.00mm, 6.00mm, 8.00mm, 10.00mm. (Tolerance: +/- 0.02mm). Pad Size: 20mm x 20mm. Material: 2024-T3 ALUMINUM. Includes Certification Report for step thickness, | 1 | |
| AFNDT-3282 | Custom Metric 7 Step Block Per ASTM E797/E797M-15. Step Thicknesses of .50mm, 1.00mm, 2.00mm, 4.00mm, 6.00mm, 8.00mm, 10.00mm. (Thickness Tolerance: +/- 0.02mm). Pad Size: 20mm x 20mm.Width Tolerance ±1.0mm and Length Tolerance ± 0.5mm. Material: 15-5P | 1 | |
| AFNDT-3289AL | Custom Metric 6 Step Block. Step Thicknesses of 1.0mm, 1.2mm, 1.4mm, and1.6mm. (Tolerance: +/- 0.02mm). Pad Size: 15mm X 15mm, (Tolerance: +/- 0.5mm) Material: 7075-T6 Aluminum with Delrin Holding Block. Includes Certification Report and Certificate | 1 | |
| AFNDT-3293/400 | 6 STEP WEDGE, .025", .050",. 100", .150", .200", 300" MATERIAL: MONEL 400. PAD SIZE: 1.50" X 1.50" TOLEREANCE = +/- .001. Includes Delrin Holding Block and Certification Report. | 1 | |
| AFNDT-3293/625I | 6 STEP WEDGE, .025", .050",. 100", .150", .200", 300" MATERIAL: 625 inconel. PAD SIZE: 1.50" X 1.50" TOLEREANCE = +/- .001. Includes Delrin Holding Block and Certification Report. | 1 | |
| AFNDT-3293/718I | 6 STEP WEDGE, .025", .050",. 100", .150", .200", 300" MATERIAL: 718 inconel. PAD SIZE: 1.50" X 1.50" TOLEREANCE = +/- .001. Includes Delrin Holding Block and Certification Report. | 1 | |
| AFNDT-3294/718I | 6 STEP WEDGE, .050", .100", .150", .200", .250", 300" MATERIAL: 718 inconel. PAD SIZE: 1.50" X 1.50" TOLEREANCE = +/- .001. Includes Delrin Holding Block and Certification Report. | 1 | |
| AFNDT-3297CS | Custom Metric 7 Step Block. Step Thicknesses of 2.5mm, 5.00mm, 5.05mm, 7.5mm, 7.55mm, 10.00mm, 10.05mm. (Thickness Tolerance: +/- 0.02mm). Pad Size: 20mm x 20mm, (Tolerance: ± 0.5mm) Material: 1018 Steel. Includes Certification Report for step thickness | 1 | |
| AFNDT-3303AL | SINGLE HOLE REFERENCE STANDARD 2024-T3 ALUMINUM, HOLE SIZE 3/8"( .375) EDM CORNER NOTCHES .030" x .030". BLOCK SIZE: 2.0" x 2.0" x 1/4" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3305AL | Custom 2 Hole Standard. Material: 7075-T6 Aluminum, Block Size: ..250" x 2.0" x 4.0" . HOLE SIZES:.098" and .188" Diameter with Type A% EDM Notch: .035" x .035" x .004" W ±.001". Includes Test Report and Certificate of Conformance Traceable to NIST. | 1 | |
| AFNDT-3307 | Custom 8 Hole Standard Manufactured to the Specifications of ATR Part Number 98S51605001-218, Part 6 51-60-00 Figure 616 Sheet 1. Material: 2024-T3 Aluminum, Block Size: .390" x 4.4" x 4.4"(10mm x 111.8mm x 111.8mm) . HOLE SIZES: 2.5mm and 3.2mm. Include | 1 | |
| AFNDT-3316AL | Custom Bolt Hole Calibration Block, 2024-T3 Aluminum. Hole Diameter 3/8" (.375")Ø Contains one EDM Corner Notch .030" x .030" +/- .001", and one EDM Radius Thumbnail Notch .120" long x .030 deep +/- .001 . Block Size = 2.0" x 2.0" x .25". Includes Tes | 1 | |
| AFNDT-3334AL | 6 STEP CALIBRATION BLOCK, STEP SIZES .040", .063", .100", .150", .200", .300" in 2024-T3 Aluminum. PAD SIZE: 1" X 1" X 6" ± .001". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3334AL-1 | 6 STEP CALIBRATION BLOCK, STEP SIZES .040", .063", .100", .150", .200", .300" in 7075-T6 Aluminum. PAD SIZE: 1" X 1" X 6" ± .001". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3335/1018 | Custom Metric 7 StepThickness Measurement Calibration Block Per ASTM E797 / E797M-15. Material: 1018 Carbon Steel . Step Thicknesses of: 1, 3, 5, 10, 15, 20 & 25mm. Pad Size: 20mm ±1mm x 20mm ±0.5mm. Includes Certification Report for step thickness and Ce | 1 | |
| AFNDT-3335/2024-T3 | Custom Metric 7 Step Thickness Measurement Calibration Block Per ASTM E797 / E797M-15. Material: Aluminum 2024-T351. Step Thicknesses of: 1, 3, 5, 10, 15, 20 & 25mm. Pad Size: 20mm ±1mm x 20mm ±0.5mm. Includes Certification Report for step thickness and C | 1 | |
| AFNDT-3335/4340 | Custom Metric 7 StepThickness Measurement Calibration Block Per ASTM E797 / E797M-15. Material: 4340 Carbon Steel . Step Thicknesses of: 1, 3, 5, 10, 15, 20 & 25mm. Pad Size: 20mm ±1mm x 20mm ±0.5mm. Includes Certification Report for step thickness and Ce | 1 | |
| AFNDT-3335/7075-T6 | Custom Metric 7 Step Thickness Measurement Calibration Block Per ASTM E797 / E797M-15. Material: Aluminum 7075-T6. Step Thicknesses of: 1, 3, 5, 10, 15, 20 & 25mm. Pad Size: 20mm ±1mm x 20mm ±0.5mm. Includes Certification Report for step thickness and Cer | 1 | |
| AFNDT-3335/TI6AL-4V | Custom Metric 7 StepThickness Measurement Calibration Block Per ASTM E797 / E797M-15. Material: 6AL-4V Titanium . Step Thicknesses of: 1, 3, 5, 10, 15, 20 & 25mm. Pad Size: 20mm ±1mm x 20mm ±0.5mm. Includes Certification Report for step thickness and Cert | 1 | |
| AFNDT-3336/600 | 4 STEP WEDGE .040, .060, .080, .100 +/-.001 INCONEL 600 . PAD SIZE:75" x .75" SUPPLIED WITH DELRIN HOLDING BLOCK. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3337AL | 5 STEP WEDGE .020", .030", .040", .050", .060". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3339MAG | 4 Step Calibration Block, .25", .500", .750", 1.00". Pad Size: .750" x .750". MATERIAL: AZ21 Magnesium. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3340CS | CUSTOM 4 STEP CALIBRATION BLOCK. MATERIAL: 4340 CARBON STEEL. STEP SIZES: .040",.090",.180", .250". PAD SIZE: .750" x .750", Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3340SS | CUSTOM 4 STEP CALIBRATION BLOCK. MATERIAL: 304 STAINLESS STEEL. STEP SIZES: .040",.090",.180", .250". PAD SIZE: .750" x .750", Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3341AL | 9 STEP REFERENCE BLOCK WITH ACETAL(DELRIN) HOLDING BLOCK. MATERIAL: 7075-T6 ALUMINUM. STEP SIZES: .030",.050",.080", .120", .160" , .200", .300", .400", .500" +/-.001". PAD SIZE = .75" x .75". Supplied with Delrin(Acetal) Holding Block. Includes Test Repo | 1 | |
| AFNDT-3341CS | 9 STEP REFERENCE BLOCK WITH ACETAL(DELRIN) HOLDING BLOCK. MATERIAL: 4340 STEEL. STEP SIZES: .030",.050",.080", .120", .160" , .200", .300", .400", .500" +/-.001". PAD SIZE = 1.0" x 1.0". Supplied with Delrin(Acetal) Holding Block. Includes Test Report and | 1 | |
| AFNDT-3341INC | 9 STEP REFERENCE BLOCK WITH ACETAL(DELRIN) HOLDING BLOCK. MATERIAL: 718 INCONEL. STEP SIZES: .030",.050",.080", .120", .160" , .200", .300", .400", .500" +/-.001". PAD SIZE = .75" x .75". Supplied with Delrin(Acetal) Holding Block. Includes Test Report an | 1 | |
| AFNDT-3341SS | 9 STEP REFERENCE BLOCK WITH ACETAL(DELRIN) HOLDING BLOCK. MATERIAL: 304 STAINLESS STEEL. STEP SIZES: .030",.050",.080", .120", .160" , .200", .300", .400", .500" +/-.001". PAD SIZE = 1.0" x 1.0". Supplied with Delrin(Acetal) Holding Block. Includes Test R | 1 | |
| AFNDT-3341TI | 9 STEP REFERENCE BLOCK WITH ACETAL(DELRIN) HOLDING BLOCK. MATERIAL: 6AL-4V TITANIUM. STEP SIZES: .030",.050",.080", .120", .160" , .200", .300", .400", .500" +/-.001". PAD SIZE = .75" x .75". Supplied with Delrin(Acetal) Holding Block. Includes Test Repor | 1 | |
| AFNDT-3343/2024T3 | 6 STEP WEDGE .010", .030", .050", .070", .090", .125" +/-.001", 2024-T3 ALUMINUM 0.75" x 0.75" STEP PAD. SUPPLIED WITH HOLDING BLOCK. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3343/7075T6 | 6 STEP WEDGE .010", .030", .050", .070", .090", .125" +/-.001", 7075-T6 ALUMINUM 0.75" x 0.75" STEP PAD. SUPPLIED WITH HOLDING BLOCK. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3345AL | 5 STEP THICKNESS STANDARD. STEP SIZES: .020", .050", .100", .150", .200", +/-.002". MATERIAL: 2024-T3 ALUMINUM. SUPPLIED WITH DELRIN HOLDING BLOCK. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3348/2024T3 | 7 STEP METRIC WEDGE: Step Sizes: 1mm, 3mm, 5mm, 10mm, 15mm, 20mm, 25mm +/- .05mm . Pad Size: 20mm x 20mm. Supplied With Holding Block. Material- 2024-T351 Aluminum (Surface Anodized for Corrosion Protection). Includes Test Report and Certificate of Confor | 1 | |
| AFNDT-3348/4340 | 7 STEP METRIC WEDGE: Step Sizes: 1mm, 3mm, 5mm, 10mm, 15mm, 20mm, 25mm +/- .05mm . Pad Size: 20mm x 20mm. Supplied With Holding Block. Material- 4340 Steel (Nickle Plated for Corrosion Protection). Includes Test Report and Certificate of Conformance. Manu | 1 | |
| AFNDT-3348/7075T6 | 7 STEP METRIC WEDGE: Step Sizes: 1mm, 3mm, 5mm, 10mm, 15mm, 20mm, 25mm +/- .05mm . Pad Size: 20mm x 20mm. Supplied With Holding Block. Material- 7075-T6 Aluminum (Surface Anodized for Corrosion Protection). Includes Test Report and Certificate of Conforma | 1 | |
| AFNDT-3348/TA6V | 7 STEP METRIC WEDGE: Step Sizes: 1mm, 3mm, 5mm, 10mm, 15mm, 20mm, 25mm +/- .05mm . Pad Size: 20mm x 20mm. Supplied With Holding Block. Material- 6AL-4V Titanium. Includes Test Report and Certificate of Conformance. Manufactured in Accordance to ASTM E797 | 1 | |
| AFNDT-3350AL | 5 STEP WEDGE .020", .030", .040", .080", .090". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3351AL | 8 STEP THICKNESS STANDARD. STEP SIZES: .015", .020", .025", .030", .035", .040", .045", .050" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 2024-T3 Aluminum. Supplied with Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3351AL-1 | 8 STEP THICKNESS STANDARD. STEP SIZES: .015", .020", .025", .030", .035", .040", .045", .050" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075-T6 Aluminum. Supplied with Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3351CS | 8 STEP THICKNESS STANDARD. STEP SIZES: .015", .020", .025", .030", .035", .040", .045", .050" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 1018 CARBON STEEL. Supplied with Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3359 | Custom 10 Step Block, supplied with holding block. Step Sizes: 2.5mm, 5.0mm, 7.5mm, 10.0mm, 12.5mm, 15.0mm, 17.5mm, 20.0mm, 22.5mm and 25.0mm, Thickness Tolerance ±.05mm. Pad Size: 20mm X 20mm. Material: Duplex 2205 Stainless Steel. Includes certificatio | 1 | |
| AFNDT-3361/2024 | Custom Metric 6 Step Block. Step Thicknesses of 0.5mm, 2.5mm, 5.0mm, 7.5mm, 10.0mm and 12.5mm. (Tolerance: +/- 0.02mm). Pad Size: 20mm X 20mm, (Tolerance: +/- 0.5mm) Material: 2024-T3 Aluminum. Includes Certification Report for step thickness and Cer | 1 | |
| AFNDT-3361/7050 | Custom Metric 6 Step Block. Step Thicknesses of 0.5mm, 2.5mm, 5.0mm, 7.5mm, 10.0mm and 12.5mm. (Tolerance: +/- 0.02mm). Pad Size: 20mm X 20mm, (Tolerance: +/- 0.5mm) Material: 7050-T7 Aluminum. Includes Certification Report for step thickness and Cer | 1 | |
| AFNDT-3366/1018 | Custom 10 Step Block, 2.5mm, 5.0mm, 7.5mm, 10.0mm, 12.5mm, 15.0mm, 17.5mm, 20.0mm, 22.5mm and 25.0mm, Thickness Tolerance ±.05mm. Pad Size: 19mm X 19mm. Material: 1018 Steel. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3366/2024 | METRIC 10 STEP BLOCK, 2.5MM, 5.0MM, 7.5MM, 10.0MM, 12.5MM, 15.0MM, 17.5MM, 20.0MM, 22.5MM AND 25.0MM, THICKNESS TOLERANCE ±.05MM. PAD SIZE: 19MM X 19M | 1 | |
| AFNDT-3366/304SS | Custom 10 Step Block, 2.5mm, 5.0mm, 7.5mm, 10.0mm, 12.5mm, 15.0mm, 17.5mm, 20.0mm, 22.5mm and 25.0mm, Thickness Tolerance ±.05mm. Pad Size: 19mm X 19mm. Material: 304 Stainless Steel. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3385/2024T3 | 12 STEP WEDGE, STEP THICKNESS: .024", .040", .060", .080", .100", .150", .200", .300", .400", .500" .650", .800" +/-.001" 2024-T3 ALUMINUM SUPPLIED WITH A DELRIN HOLDING BLOCK. Includes Test Report and Certificate of Conformance | 1 | |
| AFNDT-3385/7075T6 | 12 STEP WEDGE, STEP THICKNESS: .024", .040", .060", .080", .100", .150", .200", .300", .400", .500" .650", .800" +/-.001" 7075-T6 ALUMINUM SUPPLIED WITH A DELRIN HOLDING BLOCK. Includes Test Report and Certificate of Conformance | 1 | |
| AFNDT-3388AL | Custom Metric 7 Step Block. Step Thicknesses: 0.5mm, 2.5mm, 4.5mm, 6.5mm, 8.5mm, 10.5mm & 12.5mm. (Tolerance: +/- 0.02mm). Pad Size: 20mm x 20mm. Material: 2024-T3 ALUMINUM. Supplied with Delrin Holding Block. Includes Certification Report for step thi | 1 | |
| AFNDT-3396CS | SURFACE NOTCH REFERENCE STANDARD 4130 or 4340 CARBON STEEL. EDM NOTCH SIZE: FULL WIDTH OF PART x .51mm(.020") DEEP +/- .05mm(.002"). BLOCK SIZE: 1.0" WIDE x 3.0" LONG. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3398AL | 9 STEP THICKNESS STANDARD. STEP SIZES: .020", .030", .040", .050", .060", .070", .080", .090", .100" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075-T6 ALUMINUM.Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certifica | 1 | |
| AFNDT-3401AL | 7 STEP WEDGE. STEP SIZES: .040", .050", .060", .070", .080", .090", .100" +/- .001". PAD SIZE: 1.0"x 1.0", MATERIAL: 7075-T6 ALUMINUM SUPPLIED WITH ACETAL(DELRIN) HOLDING BLOCK. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3401CS | 7 STEP WEDGE. STEP SIZES: .040", .050", .060", .070", .080", .090", .100" +/- .001". PAD SIZE: 1.0"x 1.0", MATERIAL: 1018 CARBON STEEL SUPPLIED WITH ACETAL(DELRIN) HOLDING BLOCK. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3404AL | 5 STEP WEDGE .030", .050", .070", .090", .110". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3406-625 | 6 STEP CALIBRATION BLOCK, STEP SIZES .015", .020", .025", .030", .035", .040". MATERIAL: 625 Inconel. PAD SIZE: 1" X 1" X 6" ± .001". Supplied With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3406AL | 6 STEP CALIBRATION BLOCK, STEP SIZES .015", .020", .025", .030", .035", .040". MATERIAL: 2024-T3 Aluminum. PAD SIZE: 1" X 1" X 6" ± .001". Supplied With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3406AL-1 | 6 STEP CALIBRATION BLOCK, STEP SIZES .015", .020", .025", .030", .035" .040". MATERIAL: 7075-T6 Aluminum. PAD SIZE: 1" X 1" X 6" ± .001". Supplied With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3407AL | Aluminum Multi Hole Test Block, Rotating Probe, x16 Hole, x16 Full Bore notch 0.2mm wide x 0.5mm deep -1 CONFIG, 3/16" (4.7625), 7/32" (5.55625), 1/4" (6.35), 9/32" (7.14375), 5/16" (7.9375), 11/32" (8.73125), 3/8" (9.525), 7/16" (11.1125), 1/2" (12.7), 9 | 1 | |
| AFNDT-3407SS | 17-4PH Stainless Steel Multi Hole Test Block, Rotating Probe, x16 Hole, x16 Full Bore notch 0.2mm wide x 0.5mm deep -1 CONFIG, 3/16" (4.7625), 7/32" (5.55625), 1/4" (6.35), 9/32" (7.14375), 5/16" (7.9375), 11/32" (8.73125), 3/8" (9.525), 7/16" (11.1125), | 1 | |
| AFNDT-3407ST | 4340 Steel Multi Hole Test Block, Rotating Probe, x16 Hole, x16 Full Bore notch 0.2mm wide x 0.5mm deep -1 CONFIG, 3/16" (4.7625), 7/32" (5.55625), 1/4" (6.35), 9/32" (7.14375), 5/16" (7.9375), 11/32" (8.73125), 3/8" (9.525), 7/16" (11.1125), 1/2" (12.7), | 1 | |
| AFNDT-3407TI | Titanium Multi Hole Test Block, Rotating Probe, x16 Hole, x16 Full Bore notch 0.2mm wide x 0.5mm deep -1 CONFIG, 3/16" (4.7625), 7/32" (5.55625), 1/4" (6.35), 9/32" (7.14375), 5/16" (7.9375), 11/32" (8.73125), 3/8" (9.525), 7/16" (11.1125), 1/2" (12.7), 9 | 1 | |
| AFNDT-3409AL | 9 STEP WEDGE, 0.5mm, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square Supplied with Acetal(Delrin) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3409ST | 9 STEP WEDGE, 0.5mm, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .05mm. Material: 4340 Steel. Pad Size: 19mm x 19mm square Supplied with Acetal(Delrin) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3409TI | 9 STEP WEDGE, 0.5mm, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .05mm. Material: 6AL-4V Titanium. Pad Size: 19mm x 19mm square Supplied with Acetal(Delrin) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3410AL | CUSTOM 5 STEP CALIBRATION BLOCK. MATERIAL: 2219-T851 ALUMINUM. STEP THICKNESSES OF 0.020", 0.040",0.060", .080", .100 +/-.001". PAD SIZE 1.0" x 1.0" . Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3414-625 | 6 STEP CALIBRATION BLOCK, STEP SIZES .050", .100", .200", .300", .400", .500". MATERIAL: 625 Inconel. PAD SIZE: 1" X 1" X 6" ± .001". Supplied With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3415 | CUSTOM 6 STEP CALIBRATION BLOCK. MATERIAL: 2219-T851 ALUMINUM. STEP THICKNESSES OF .025", .030", .035", .040", .045", .050" +/-.001". PAD SIZE 1.0" x 1.0" . Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3417/2024T3 | 5 STEP WEDGE,0.25mm, 0.50mm, 0.75mm, 1.00mm, 1.25mm, +/- .02mm. Material: 2024-T3 Aluminum. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3417/2024T42 | 5 STEP WEDGE,0.25mm, 0.50mm, 0.75mm, 1.00mm, 1.25mm, +/- .02mm. Material: 2024-T42 Aluminum. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3417/304SS | 5 STEP WEDGE,0.25mm, 0.50mm, 0.75mm, 1.00mm, 1.25mm, +/- .02mm. Material: 304 nStainless Steel. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3417/7075T6 | 5 STEP WEDGE,0.25mm, 0.50mm, 0.75mm, 1.00mm, 1.25mm, +/- .02mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3417/TI | 5 STEP WEDGE,0.25mm, 0.50mm, 0.75mm, 1.00mm, 1.25mm, +/- .02mm. Material: 6AL-4V Titanium. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3418/2024T3 | 8 STEP WEDGE, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .02mm. Material: 2024-T3 Aluminum. Pad Size: 20mm x 20mm ±.05mm square Supplied With Acetal( Delrin ) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3418/2024T42 | 8 STEP WEDGE, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .02mm. Material: 2024-T42 Aluminum. Pad Size: 20mm x 20mm ±.05mm square Supplied With Acetal( Delrin ) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3418/304SS | 8 STEP WEDGE, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .02mm. Material: 304 Stainless Steel. Pad Size: 20mm x 20mm ±.05mm square Supplied With Acetal( Delrin ) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3418/7075T6 | 8 STEP WEDGE, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .02mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm ±.05mm square Supplied With Acetal( Delrin ) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3418/TI | 8 STEP WEDGE, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .02mm. Material: 6AL-4V Titanium. Pad Size: 20mm x 20mm ±.05mm square Supplied With Acetal( Delrin ) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3419S | Custom 14 Step Block, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 9.0mm, 10.0mm, 14.0mm, 16.0mm, 40mm, 50mm and 60.0mm, Thickness Tolerance ±.05mm. Pad Size: 20mm X 20mm. Material: 4340 STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3428 | CUSTOM SURFACE CALIBRATION BLOCK. MATERIAL: 7075-T73 ALUMINUM. 3 EDM NOTCH SIZES: 2.0mm(.078") LONG x 0.1mm(.0039") WIDE x 0.25mm(.010") DEEP. 6.35mm(.25") LONG x 0.1mm(.0039") WIDE x 0.5mm(.019") DEEP. 1.5mm(.059") LONG x 0.1mm(.0039") WIDE x 0.76mm(. | 1 | |
| AFNDT-3429 | 6 STEP CALIBRATION BLOCK, .5mm, 1.0mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm. ± .001, 3/4X3/4 FACE, 1018 CARBON STEEL Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3432/2050AL | 7 STEP WEDGE .050", .100",. 150", .200", .250", .300", .350". MATERIAL: 2050 ALUMINUM. PAD SIZE: 1.0" x 1.0" TOLEREANCE = +/- .001. Supplied With Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3432/2195AL | 7 STEP WEDGE .050", .100",. 150", .200", .250", .300", .350". MATERIAL: 2195 ALUMINUM. PAD SIZE: 1.0" x 1.0" TOLEREANCE = +/- .001. Supplied With Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3432/6061AL | 7 STEP WEDGE .050", .100",. 150", .200", .250", .300", .350". MATERIAL: 6061 ALUMINUM. PAD SIZE: 1.0" x 1.0" TOLEREANCE = +/- .001. Supplied With Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3437AL | CUSTOM 4 STEP METRIC CALIBRATION BLOCK. MATERIAL: 7075-T6 ALUMINUM. STEP SIZES: 5mm, 10mm,15mm and 20mm. PAD SIZE: 20mm x 20mm, Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3437SS | CUSTOM 4 STEP METRIC CALIBRATION BLOCK. MATERIAL: 304 STAINLESS STEEL. STEP SIZES: 5mm, 10mm,15mm and 20mm. PAD SIZE: 20mm x 20mm, Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3441AL | 10 STEP REFERENCE BLOCK SUPPLIED WITH DELRIN HOLDING BLOCK, STEP SIZES: .015", .025", .035", .045", .055", .065", .075", .085", .095",.105". PAD SIZE: 1.0" x 1.0". MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance | 1 | |
| AFNDT-3445AL | 5 STEP BLOCK -2 UNIT - AL BLOCK CONSIST OF 5 DIFFERENT THICKNESS (30MM, 25MM, 20MM, 15MM, 10MM) AS BELOW. - MATERIAL AL 2024 | 1 | |
| AFNDT-3446 | SURFACE STANDARD MATERIAL: 7075-T6 or 2024-T3 ALUMINUM. EDM SLOT (0.5mm(.020") DEEP) x (0.13mm(.05") WIDE) +/-.03mm. BLOCK SIZE 3.50" X 1.0" X .50 Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3449/2024AL | 8 STEP WEDGE, STEP SIZES: .030", .040", .050", .060", .070", .080", .090", and .100" +/- .001". PAD SIZE: 1.0" x 1.0" Supplied With Delrin Holding Block. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3449/304SS | 8 STEP WEDGE, STEP SIZES: .030", .040", .050", .060", .070", .080", .090", and .100" +/- .001". PAD SIZE: 1.0" x 1.0" Supplied With Delrin Holding Block. MATERIAL: 304 STAINLESS STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3449/6AL-4V | 8 STEP WEDGE, STEP SIZES: .030", .040", .050", .060", .070", .080", .090", and .100" +/- .001". PAD SIZE: 1.0" x 1.0" Supplied With Delrin Holding Block. MATERIAL: 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3449/7075AL | 8 STEP WEDGE, STEP SIZES: .030", .040", .050", .060", .070", .080", .090", and .100" +/- .001". PAD SIZE: 1.0" x 1.0" Supplied With Delrin Holding Block. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3452AL | 8 Step Calibration Block, Material 7075-T6 Aluminum. Steps: 1mm, 2mm, 4mm, 6mm, 8mm, 10mm, 15mm, 20mm. (Tolerance: +/-0.02mm).- Pad Size: 19mm x 19mm (Tolerance: +/- 0.5mm). Includes Certification Report and Certificate of Conformance. | 1 | |
| AFNDT-3453 | Custom Calibration Block, 7050-T7 Aluminum. Hole Diameter .310 Ø Contains one EDM Corner Notch .020" x .020" +/- .002", and one EDM Surface Notch .030 deep x .015" wide +/- .002 . Block Size = 3.75" x 1.0" x .25". Includes Test Report and Certificate | 1 | |
| AFNDT-3454 | 5 STEP WEDGE .020", .040", .060", .080", .120". MATERIAL: 360 BRASS. PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3462AL | 10 STEP REFERENCE BLOCK, Step Pad Thicknesses: .010", .020", .040", .060", .080", .100", .150", .200", .250", .300", +/-.001" . Material: Anodized 7075-T6 ALUMINUM, Pad Size: .75" x 75" with Acetal( Delrin) holding block. Includes Test Report and Ce... | 1 | |
| AFNDT-3477AL | METRIC 10 STEP ALUMINUM CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 25mm X 25mm. Material: 2024-T3 Aluminum Supplied with a Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3477CS | METRIC 10 STEP CARBON STEEL CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 25mm X 25mm. Material: 1018 or 4340 Carbon Steel Supplied with a Delrin Holding Block. Includes Test Report and Certificate of Conform... | 1 | |
| AFNDT-3477TI | METRIC 10 STEP TITANIUM CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 25mm X 25mm. Material: 6AL-4V Titanium Supplied with a Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3478TI | 5 STEP WEDGE .024", .040", .060", .080", .100". TOLERANCE +/-.002". ..MATERIAL: 6AL-4V TITANIUM . PAD SIZE: 75" x .75" .Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3479TI | 7 STEP CALIBRATION BLOCK. MATERIAL: 6AL-4V TITANIUM. STEP THICKNESS: 0.024", 0.040", 0.060", 0.800", 0.100", .150" 0.200" +/- .001". STEP PAD SIZE: .75" x .75". Note: The first and last pad is 1.0" long. Supplied With Delrin Holding Block Includes certi | 1 | |
| AFNDT-3482AL | 5 STEP CALIBRATION BLOCK, 7075-T6 ALUMINUM. STEP SIZES: .098", .197", .295", .394", .492" ± .001". PAD SIZE: 1.0" x 1.0". Supplied with Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3482AL-1 | 5 STEP CALIBRATION BLOCK, 7075-T6 ALUMINUM. STEP SIZES: .020", .039", .059", .079", .098" ± .001". PAD SIZE: 1.0" x 1.0". Supplied with Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3483AL | BOEING 2 STEP CALIBRATION BLOCK, PT 4 51-00-00 PAGE 6 FIGURE 2, MATERIAL: 7075-T6 Aluminum. Step Size: 0.150" and 0.300" ±.0.002. PAD SIZE: 1.0" X 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3483CS | BOEING 2 STEP CALIBRATION BLOCK, PT 4 51-00-00 PAGE 6 FIGURE 2, MATERIAL: LOW CARBON STEEL SUCH AS 1018, 4130 or 4340. Step Size: 0.150" and 0.300" ±.0.002. PAD SIZE: 1.0" X 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3486/15-5PH | 8 STEP WEDGE, STEP SIZES: 0.125", 0.150", 0.289", 0.300", 0.350", 0.476", 0.500", 0.650" +/- .001". PAD SIZE: 1.0" x 1.0". MATERIAL: 15-5PH STAINLESS STEEL SUPPLIED WITH DELRIN HOLDING BLOCK. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3487/4130 | 5 STEP WEDGE .050", .100", .200", .400", .500". TOLERANCE +/-.001". MATERIAL: 4130 STEEL SUPPLIED WITH HOLDING BLOCK. PAD SIZE: 1.0" x 1.0" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3487/TI | 5 STEP WEDGE .050", .100", .200", .400", .500". TOLERANCE +/-.001". MATERIAL: 6AL-4V TITANIUM SUPPLIED WITH HOLDING BLOCK. PAD SIZE: 1.0" x 1.0" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3488/AL | 5 STEP WEDGE .032", .064", .128", .256", .500". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM SUPPLIED WITH HOLDING BLOCK. PAD SIZE: 1.0" x 1.0" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3489/AL | 9 STEP WEDGE: .010", .020" .032", .040", .050", .064", .128", .256", .500". TOLERANCE +/-.001". MATERIAL: 2024-T3 ALUMINUM SUPPLIED WITH HOLDING BLOCK. PAD SIZE: 1.0" x 1.0" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3491AL | METRIC 6 STEP WEDGE. STEP SIZE: 0.6mm, 1mm, 3mm, 7mm, 13mm, 20mm +/- .03mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3493AL | 7 STEP REFERENCE BLOCK ..STEP PAD SIZE: 1.0" X 1.0" MATERIAL: 7075-T6 ALUMINUM. STEP RANGE:.100", .200", .300", .400", .500", .600", .700" +/- .001". Includes certification report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3496CS | 8 STEP WEDGE, STEP SIZES: .020", .025", .030", .040", .050", .060", .080", and .100" +/- .001". PAD SIZE: .75" x .75" Supplied With Delrin Holding Block. MATERIAL: 4340 Steel . Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3496TI | 8 STEP WEDGE, STEP SIZES: .020", .025", .030", .040", .050", .060", .080", and .100" +/- .001". PAD SIZE: .75" x .75" Supplied With Delrin Holding Block. MATERIAL: 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3505/6061-T4 | METRIC 10 STEP CALIBRATION BLOCK, 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm ± .05mm. Pad Size: 20mm X 20mm. Material: 6061-T4 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3508/6061 | METRIC 5 STEP CALIBRATION BLOCK, 6061-T4 ALUMINUM. STEP SIZES: .5mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm. PAD SIZE: 1.0" x 1.0". PROVIDED WITH A DELRIN HOLDER.Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3516/15-5PH | 6 STEP CALIBRATION BLOCK, MATERIAL: 15-5PH STEEL. PAD SIZE: .75" x .75". STEP SIZES: .030", .100", .200", .300", .400", .500" ± .001". Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3521AL | 5 STEP METRIC WEDGE , 2mm, 4mm, 6mm, 8mm, 10mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square Supplied with Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3523AL | 4 Step Calibration Block, 1.250", 1.500", 1.750", 2.000". Tolerance= ± .002" MATERIAL: 7075-T6 Aluminum. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3523CS | 4 Step Calibration Block, 1.250", 1.500", 1.750", 2.000". Tolerance= ± .002" MATERIAL: 4340 Carbon Steel. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3523MAG | 4 Step Calibration Block, 1.250", 1.500", 1.750", 2.000". Tolerance= ± .002" MATERIAL: Magnesium. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3523SS | 4 Step Calibration Block, 1.250", 1.500", 1.750", 2.000". Tolerance= ± .002" MATERIAL: 304 Stainless Steel. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3523TI | 4 Step Calibration Block, 1.250", 1.500", 1.750", 2.000". Tolerance= ± .002" MATERIAL: 6AL-4v Titanium. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3529AL | 4 Step Calibration Block, .750", 1.000", 1.250", 1.500". Tolerance= ± .002" MATERIAL: 2024-T3 Aluminum. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3537AL | METRIC 5 STEP WEDGE. STEP SIZES: 0.40mm, 0.65mm, 1.3mm, 2.0mm, 2.5mm STEP TOLERANCE +/-.03mm(.00118"). MATERIAL: 2024-T3 ALUMINUM .PAD SIZE: 25mm x .25mm. Supplied with Delrin Holding Block. Includes Test Report traceable to NIST, Mill Certificate f... | 1 | |
| AFNDT-3542AL | METRIC 5 STEP WEDGE 0.6mm(.024"),5.44mm( .214"),10.26mm( .404"),15.09mm( .594"), 20mm(.787"). TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certif... | 1 | |
| AFNDT-3544/2219-T8 | 10 STEP REFERENCE BLOCK .038, .045, .055, .065, .080, .100, .125, .150", .175", .200", ± .001" Supplied with Delrin Holding Block... Pad Size: .800" x .800" ± 0.010" Material: 2219-T8. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3547CS | 5 STEP WEDGE, .020", .030", .040", .050", .060". TOLERANCE +/-.001". MATERIAL: 4340 Steel . PAD SIZE: .75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3548/7075 | 5 STEP WEDGE, 1mm, 3mm, 5mm, 7mm, 10mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square supplied with Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3552TI | 5 Step calibration block (0.100", 0.250", 0.500", 0.750" and 1.000"; . Step pad size: .75” x .75”. Material: 6AL-4V Titanium. Includes Test Report and Certificate of Conformance.....Reference: B777 NTM Part4 51-00-10 | 1 | |
| AFNDT-3558/7075T6 | 10 STEP WEDGE SUPPLIED WITH DELRIN HOLDING BLOCK. STEP SIZES: .020", .040", .60", .80", .100", .120", .140", .160", .180", .200" +/-.001". Material: 7075-T6 ALUMINUM. PAD SIZE: .75" x .75". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3561AL | CUSTOM 3 STEP CALIBRATION BLOCK, 2024-T3 ALUMINUM... STEP PAD SIZE: 25.0mm x 25.0mm. STEP THICKNESSES: 0.3mm, 0.5mm and 0.8mm ± 0.03mm. Supplied with Protective Acetal Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3562/321SS | CUSTOM 3 STEP CALIBRATION BLOCK 321 Stainless, STEP SIZES .75" x .75" FACE. STEP THICKNESSES OF 0.025", 0.040" and 0.060" +/-.001". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-4010/2024T3 | 6 STEP WEDGE: 0.030 in. (0.762 mm), 0.050 in. (1.27 mm), 0.100 in.(2.54 mm), 0.150 in (3.81 mm), 0.300 in. (7.62 mm), and 0.500 in. (12.70 mm) +/-.001", Material: 2024-T3 Aluminum. Pad Size: 0.75" x 0.75" , BLOCK SIZE: 4.50" L x .750"W SUPPLIED WITH D | 1 | |
| AFNDT-4010/7075T6 | 6 STEP WEDGE: 0.030 in. (0.762 mm), 0.050 in. (1.27 mm), 0.100 in.(2.54 mm), 0.150 in (3.81 mm), 0.300 in. (7.62 mm), and 0.500 in. (12.70 mm) +/-.001", Material: 7075-T6 Aluminum. Pad Size: 0.75" x 0.75" , BLOCK SIZE: 4.50" L x .750"W SUPPLIED WITH D | 1 | |
| AFNDT-40244 | CUSTOM ETHER NDE TEST BLOCK, PER SPEC | 1 | |
| AFNDT-CHOKE BLOCK-70/30 | CALIBRATION BLOCK 70/30 COPPER-NICKEL | 1 | |
| AFNDT-CHOKE BLOCK-C | CALIBRATION BLOCK 1018 CARBON STEEL | 1 | |
| AFNDT-CHOKE BLOCK-DUP | CALIBRATION BLOCK 2205 SS (DUPLEX) | 1 | |
| AFNDT-CHOKE BLOCK-S | CALIBRATION BLOCK 303 STAINLESS STEEL | 1 | |
| AFNDT-DELRIN BLOCKS | DELRIN BLOCKS W/ TOE CLAMPS .500-.030 STEP BLOCKS | 1 | |
| AFNDT-IIW-01-CASE | Form Fitted Wood Case for IIW Type 1 Calibration Block | 1 | |
| AFNDT-IIW-01AL | ALUM. IIW TYPE 1 TEST BLOCK.. Aluminum Ultrasonic IIW Type 1 Test Block 7075-T6 Aluminum. 1 "x 4"x 12". Contains 2" diameter hole and 4" radius. Also, 1/8" x 1" radius alternate reflector and 1/16" deep on echo side. Meets ASTM-E-164, MIL-STD-2154 a... | 1 | |
| AFNDT-IIW-01CS | IIW TYPE 1 TEST BLOCK.. Aluminum Ultrasonic IIW Type 1 Test Block 1018 Carbon Steel. 1 "x 4"x 12". Contains 2" diameter hole and 4" radius. Also, 1/8" x 1" radius alternate reflector and 1/16" deep on echo side. Meets ASTM-E-164, MIL-STD-2154 and AW... | 1 | |
| AFNDT-PR-T-2521/22 | CUSTOM EDDY CURRENT SURFACE CALIBRATION BLOCK. PER CUSTOMER SUPPLIED DRAWING. MATERIAL: 7075-T6 Aluminum. EDM Notch size 1mm (.040') , .76mm(.030"), .2mm(.008") deep x .1mm(.004") wide +/- .002". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-ROMPAS-7075-T6 | ROMPAS BLOCK, 7075-T6 ALUMINUM ½" (12.5mm) or 1" (25.4 mm) thick, 1" radius opposite 2" radius, with 5/64" diameter side drilled hole (3/4" deep flat bottom hole in 1" thick version). SPECIFICATION: ASTM E-164. (Includes wooden case) | 1 | |
| AFNDT-SRS-082A-1 | EDDY CURRENT SURFACE BLOCK 7075-T6 ALUMINUM. 2 EDM SLOTS ( 0.2mm deep +/-0.05mm & 0.12mm wide +/- 0.01mm). EDM NOTCH#1 ( 0.5mm deep +0.06/-0.04 & 0.12 wide +0.01/-0.02 ), and EDM NOTCH #2 ( 1.0mm deep +0.06mm/-0.04mm & 0.12mm wide +0.01mm/-0.02mm). Inc... | 1 | |
| AFNDT-SRS-082S-1 | EDDY CURRENT SURFACE BLOCK 4130 STEEL. 2 EDM SLOTS ( 0.2mm deep +/-0.05mm & 0.12mm wide +/- 0.01mm). EDM NOTCH#1 ( 0.5mm deep +0.06/-0.04 & 0.12 wide +0.01/-0.02 ), and EDM NOTCH #2 ( 1.0mm deep +0.06mm/-0.04mm & 0.12mm wide +0.01mm/-0.02mm). Includes ... | 1 | |
| AFS-1372 | 412A5MHZ35AL TRANSVERSE WAVE FROM GEGELEC SA (REFER TO CHAPTER 51-42-01 PABE BLOCK 401) | 1 | |
| AFS-1373 | 412A5MHZ40AL TRANSVERSE WAVE FROM GEGELEC SA (REFER TO CHAPTER 51-42-01 PABE BLOCK 401) | 1 | |
| AFS-1374 | 412A5MHZ45AL TRANSVERSE WAVE FROM GEGELEC SA (REFER TO CHAPTER 51-42-01 PABE BLOCK 401) | 1 | |
| AFS-1375 | 412A5MHZ30AL 30° TRANSVERSE WAVE FROM GEGELEC SA (REFER TO CHAPTER 51-42-01 PAGE BLOCK 401). CASE SIZE: .75" LONG x .340" WIDE x 500" HIGH. | 1 | |
| AFS-1378 | 412A5MHZ65AL TRANSVERSE WAVE FROM GEGELEC SA (REFER TO CHAPTER 51-42-01 PAGE BLOCK 401). Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1379 | 412A5MHZ70AL TRANSVERSE WAVE FROM GEGELEC SA (REFER TO CHAPTER 51-42-01 PABE BLOCK 401) | 1 | |
| AFS-1380 | 412A5MHZ60AL TRANSVERSE WAVE FROM GEGELEC SA (REFER TO CHAPTER 51-42-01 PABE BLOCK 401) | 1 | |
| AFS-1381 | 412A5MHZ55AL TRANSVERSE WAVE FROM GEGELEC SA (REFER TO CHAPTER 51-42-01 PABE BLOCK 401) | 1 | |
| AFS-1382 | 412A5MHZ50AL TRANSVERSE WAVE FROM GEGELEC SA (REFER TO CHAPTER 51-42-01 PABE BLOCK 401) | 1 | |
| AGE-02659-001 | BLOCK 1-ALUMINUM | 1 | |
| AGE-02660-001 | BLOCK 2-ALUMINUM | 1 | |
| AGE10153 | Alignment Block | 1 | |
| AGE18810 | HOLDING BLOCK | 1 | |
| AHS29 | CALIBRATION BLOCK, OLYMPUS PN MHS‐29‐1A‐0, ALUMINUM ALLOY WITH EDM HOLES (FROM: 1/8 IN TO 1 IN) | 1 | |
| AIR VAC 22 | VACUUM VENTURI BLOCK | 1 | |
| AIRVAC22 | VACUUM VENTURI BLOCK | 1 | |
| AL2024-016-063 | CUSTOM 4 STEP REFERENCE BLOCK. MATERIAL: 2024-T3. STEP SIZE 0.016", 0.032", 0.056", 0.063" +/-.002". PAD SIZE: .787" x .787". Includes Test Report and Certificate of Conformance. | 1 | |
| AL2024-024-125 | CUSTOM 4 STEP REFERENCE BLOCK. MATERIAL: 2024-T3. STEP SIZE 0.024", 0.071", 0.112", 0.125" +/-.002". PAD SIZE: .787" x .787". Includes Test Report and Certificate of Conformance. | 1 | |
| AL29-32 | CALIBRATION BLOCK | 6 | |
| AL35-45 | CALIBRATION BLOCK | 8 | |
| AL7075-016-063 | CUSTOM 4 STEP REFERENCE BLOCK. MATERIAL: 7075-T6. STEP SIZE 0.016", 0.032", 0.056", 0.063" +/-.002". PAD SIZE: .787" x .787". Includes Test Report and Certificate of Conformance. | 1 | |
| AL7075-024-125 | CUSTOM 4 STEP REFERENCE BLOCK. MATERIAL: 7075-T6. STEP SIZE 0.024", 0.071", 0.112", 0.125" +/-.002". PAD SIZE: .787" x .787". Includes Test Report and Certificate of Conformance. | 1 | |
| AM29343 | DRIVE BLOCK PRESSING-IN TOOL | 1 | |
| AM29364 | Drive block pressing (in tool) | 1 | |
| AM29725 | DRIVE BLOCK PRESSING IN TOOL | 1 | |
| AM29726 | DRIVE BLOCK PRESSING-IN TOOL | 1 | |
| ANDT 1015 | Calibration Block | 3 | |
| ANDT 1049 | Calibration Block | 3 | |
| ANDT 1052 | REFERENCE BLOCK | 3 | |
| ANDT 1057 | Calibration Block | 3 | |
| ANDT 1077 | Calibration Block | 4 | |
| ANDT 3006 | Calibration Block | 3 | |
| ANDT-1096AL | 10 STEP REFERENCE BLOCK, .020".030",.040",.050",.063",.071",.080",.090",100",.125" MATERIAL: (7075-T651 ALUMINUM) | 1 | |
| ANDT1015 | CALIBRATION BLOCK | 3 | |
| ANDT1049 | REFERENCE BLOCK | 3 | |
| ANDT1051 | REFERENCE BLOCK | 4 | |
| ANDT1052 | REFERENCE BLOCK | 3 | |
| ANDT1053 | CALIBRATION BLOCK | 5 | |
| ANDT1057 | CALIBRATION BLOCK | 3 | |
| ANDT1081 | CALIBRATION BLOCK (0.056"-0.067") | 2 | |
| ANDT3004 | Calibration Block | 3 | |
| ANDT3016-B | Calibration Block | 4 | |
| ANDT3019 | Calibration Block | 3 | |
| ANDT4126 | Calibration Block | 2 | |
| APB-NDT007 | REFERENCE BLOCK | 1 | |
| APB-NDT008 | REFERENCE BLOCK | 1 | |
| APB-NDT015 | REFERENCE BLOCK | 1 | |
| ARS-0824S | REFERENCE BLOCK MADE OF 41304340 STEEL | 1 | |
| ARS-1018NAV | NAVSHIPS Test Block - 1018 Carbon Steel, 1 1/4" x 3" x 12", Contains six 3/64" diameter drilled holes at distances of 1/8" thru 2 3/4", With Case. | 1 | |
| ARS-304NAV | NAVSHIPS TEST S.S. BLOCK | 1 | |
| ARS-7075NAV | NAVSHIPS TEST ALUM BLOCK | 1 | |
| ASE-WSNDT | CUSTOM SURFACE CALIBRATION BLOCK. MATERIAL: 7075-T73 ALUMINUM. EDM NOTCH SIZE: 1.52mm(.060") LONG x 0.13mm(.0051") WIDE x 0.76mm(.030") DEEP. +/- .05mm. Includes Test Report and Certificate of Conformance. | 1 | |
| ASTM B193 | CALIBRATION BLOCK | 1 | |
| ASTM E127 | ASTM DISTANCE/AREA AMPLITUDE BLOCK, (SET OF 10) - ALUMINIUM | 1 | |
| ASTM E1417 | ASTM DISTANCE/AREA AMPLITUDE BLOCK, (SET OF 10) - ALUMINIUM | 1 | |
| ASTME-428 | ULTRASONIC TEST BLOCK SET | 1 | |
| AT520CT-39 | CINCH BLOCK | 1 | |
| AT575-343W | CALIBRATION BLOCK | 1 | |
| ATB005 | TEST BLOCK, ROTATING PROBE | 1 | |
| ATBC-ALU6082 | ACCESSORY, TEST BLOCK, CONDUCTIVITY, ALUMINIUM ALLOY, 6082-T6 (45.1-49.0 %IACS) | 1 | |
| ATBC-ALU7075 | TEST BLOCK, CONDUCTIVITY, ALUMINIUM ALLOY, 7075-T6 (30.0-34.1 IACS) | 1 | |
| ATBC-BRASS | TEST BLOCK, CONDUCTIVITY, BRASS, CZ 121 (23.3-26.6 IACS) | 1 | |
| ATBCALU7075 | TEST BLOCK, CONDUCTIVITY, ALUMINIUM ALLOY, 7075-T6 (30.0-34.1 %IACS) | 1 | |
| ATBCBRASS | TEST BLOCK, CONDUCTIVITY, BRASS, CZ 121 (23.3-26.6 %IACS) | 1 | |
| ATI13077 | DRILL CUP-BLOCK AND BUSHINGS | 1 | |
| ATI520CT39 | CINCH BLOCK | 1 | |
| ATIBAT54SBK | SNATCH BLOCK | 1 | |
| ATR42-57-0038 | ALUMINUUM STANDARD REF BLOCK 1,2&3 | 1 | |
| AVC10936-1 | BLOCK UPLOCK UNIT ADJUSTEMENT | 1 | |
| AW-05384 | ATR STEPWEDGE CALIBRATION BLOCK | 1 | |
| B27023 | RIGGING BLOCK EQPT -0 ELEVATOR AFT QUADRANT | 1 | |
| B27023-1 | RIGGING BLOCK ELEV NEUTRAL AFT | 1 | |
| B27023-14 | ELEVATOR RIGGING BLOCK | 1 | |
| B27023-30 | ELEVATOR RIGGING BLOCKER | 1 | |
| B27023-31 | RIGGING BLOCK EQUIPMENT | 1 | |
| B27023-47 | RIGGING BLOCK EQUIPMENT - ELEVATOR AFT QUADRANT | 7 | |
| B27023-48 | RIGGING BLOCK -0 | 3 | |
| B27023-48-M | RIGGING BLOCK | 1 | |
| B27023-49 | RIGGING BLOCK | 1 | |
| B27023-7 | ELEVATOR AFT RIGGING BLOCK TOOL | 1 | |
| B27054 | BLOCK -0 AILERON PCU LEAK TEST | 1 | |
| B27054-14 | BLOCK - AILERON PCU LEAK TEST | 7 | |
| B27054-6 | AILERON PCU LEAK TEST BLOCK | 1 | |
| B27078-29 | BLOCK AND TACKLE ASSY | 1 | |
| B27078-38 | Block and tackle assy | 1 | |
| B71022-30 | BLOCK MOUNTING | 1 | |
| BACC14AD05JL | 9/16 BLOCKING CAP | 1 | |
| BACC14AD06JL | 5/8 BLOCKING CAP | 9 | |
| BACC14AD08JL | 11/16 BLOCKING CAP | 1 | |
| BACS18AR6 | SPACER-TERMINAL BLOCK | 1 | |
| BAT-54SBK | "Snatch Block" Bushing Holder ("Steam Boat") | 1 | |
| BAT-70 | Bushing Tool - 4 Hole Drill Block - Brown Tool Exclusive! | 1 | |
| BBB01 | Ionic Systems Brush Block Bolt, Black Anodised | 2 | |
| BF185A | SANDING BLOCK | 1 | |
| BF189A | SANDING BLOCK | 1 | |
| BH7475 – T7351 | EDDY CURRENT ROTO CALIBRATION TEST BLOCK | 4 | |
| BL46613 | REST BLOCK BEARING INSTL SWAGING | 1 | |
| BLOCK GAGE | 81PC SHOP GR ECONOMY RECT SPI GAGE BLOCK SET | 1 | |
| BQ832 | Starrett 119 HEAVY DUTY BENCH BLOCK | 1 | |
| BR742 | Starrett 129 BENCH BLOCK | 1 | |
| BS-2704 | REFERENCE BLOCK | 1 | |
| C-130-OW-016 | CALIBRATION STANDARD BLOCK | 2 | |
| C-25-1 1/2 | C25-1 1/2 MB NEW BALL BEARING PILLOW BLOCK | 1 | |
| C12-DEL-3C1N | CALIBRATION BLOCK | 3 | |
| C12-DIS-3C1N | CALIBRATION BLOCK | 3 | |
| C12-PCS-3C1N | CALIBRATION BLOCK | 3 | |
| C12-POT-3C1N | CALIBRATION BLOCK | 3 | |
| C12051T-19-1285 | DRILL/REAMER GUIDE BLOCK,BUSHING ID=.1285" | 1 | |
| C12051T-19-1290 | DRILL/REAMER GUIDE BLOCK,BUSHING ID=.1290" | 1 | |
| C12051T-19-1720 | DRILL/REAMER GUIDE BLOCK,BUSHING ID=.1720" | 1 | |
| C12051T-70-2344 | SPRING GUIDE BLOCK | 1 | |
| C12DIS3C1N | CALIBRATION BLOCK | 3 | |
| C12P0D3C1N | CALIBRATION BLOCK | 1 | |
| C12PCS3C1N | CALIBRATION BLOCK | 3 | |
| C17209-19 | DRILL BLOCK HANDLE | 1 | |
| C27021-1 | Test Block-Leading Edge Actuator | 2 | |
| C27032-4-INC | ZERO BLOCK- INCOMPLETE | 1 | |
| C27044-9 | FWD PIN BLOCK | 1 | |
| C27059-1 | Test Block Equipment -Leading Edge Flap And Slat Actuator | 3 | |
| C27060-13 | Handle Block | 1 | |
| C32034-97 | CYLINDER HINGE BLOCK | 1 | |
| C32038-12 | END V-BLOCK | 1 | |
| C32038-57 | STAND V -BLOCK ASSY | 6 | |
| C47941 | HOLDING BLOCK | 1 | |
| C47949 | HOLDING BLOCK | 1 | |
| C651G1040101 | SUPPORT BLOCK FWD SECTION | 1 | |
| C6U1140–33 | BLOCK – COMPRESSION | 1 | |
| C78009-79 | Contour block assy RH | 1 | |
| C78009-80 | Contour block assy LH | 1 | |
| CALBLK-STD-105 | V2/A4-20MM-Ø1.5MM CALIBRATION BLOCK | 1 | |
| CALBLK2.125 | BLOCK, CALIBRATION | 1 | |
| CALIBRATION BLOCK 4.4 MS/M | CALIBRATION BLOCK SET FOR SB 53-1298 | 1 | |
| CALIBRATION BLOCK 58.5 MS/M | CALIBRATION BLOCK SET FOR SB 53-1298 | 1 | |
| CB-LM-532048 | REFERENCE BLOCK FIGURE 5. MATERIAL: 2024-T351 ALUMINUM WITH PRIMER. EDM NOTCH: 3mm X 3mm X .15mm ± .05mm. Includes Test Report and Certificate of Conformance. | 1 | |
| CCC14755 | ALUMINIUM SENSITIVITY TEST BLOCK | 1 | |
| CCC14755/PT-ATB | ALUMINIUM SENSITIVITY TEST BLOCK | 1 | |
| CEP23 | REFERENCE BLOCK SEARCH UNIT | 2 | |
| CFM56 9970 | CALIBRATION BLOCK | 1 | |
| CFM56 9970-958-579 | EDDY CURRENT SURFACE REFERENCE BLOCK. 2 EDM NOTCHES .012" Deep x .004" Wide and .020" Deep x .004" Wide. Tolerance on Width (.004" W +/- .002"), Material: Inconel 600 Series. Reference: CFM56-5B S/B 72-0620 PAGE 14. Includes Test Report and Certificate | 2 | |
| CG-150-6 | Block end | 1 | |
| CG01 | GUN TOILET UNBLOCKING | 1 | |
| CG150-6 | END BLOCKS | 1 | |
| CG4000A2S | PULLER CHAIN BLOCK 2 TON, CG4000A2S, | 1 | |
| CG656-6 | END BLOCK | 1 | |
| CH1346-0018 | SETTING BLOCK | 1 | |
| CH1540-0262 | Settling Block | 1 | |
| CH1540-0262PM | SETTLING BLOCK | 1 | |
| CH1540-0263 | SETTLING BLOCK | 1 | |
| CH1540-0348 | Settling Block | 1 | |
| CH1540-0350 | Settling Block | 1 | |
| CH1540-0352 | Settling Block | 1 | |
| CH1540-0353 | Settling Block | 1 | |
| CH2091A0004-1 | BLANKET, THRUST REVERSER BLOCKER DOOR | 1 | |
| CH705-1027 | SETTLING BLOCK | 1 | |
| CH705-1029 | SETTLING BLOCK | 1 | |
| CH705-1030 | SETTLING BLOCK | 1 | |
| CH705-1031 | SETTLING BLOCK | 1 | |
| CH705-1032 | SETTLING BLOCK | 1 | |
| CH705-1033 | SETTLING BLOCK | 1 | |
| CH705-1034 | SETTLING BLOCK | 1 | |
| CH705-264 | SETTING BLOCK | 1 | |
| CH705-647 | SETTLING BLOCK | 1 | |
| CH705-649 | SETTLING BLOCK | 1 | |
| CH705-691 | SETTING BLOCK | 1 | |
| CH705-789 | SETTING BLOCK | 1 | |
| CH723-1100 | SETTLING BLOCK | 1 | |
| CH723-1120 | SETTLING BLOCK | 1 | |
| CH723-1121 | SETTLING BLOCK | 1 | |
| CH723-1122 | SETTLING BLOCK | 1 | |
| CH723-1123 | SETTLING BLOCK | 1 | |
| CHA1542-0041 | Settling Block | 1 | |
| CHA1542-0041PM | SETTLING BLOCK | 1 | |
| CHA1542-0046 | Settling Block | 1 | |
| CHA1542-0048 | Settling Block | 1 | |
| CHA1629-0113 | Settling Block | 1 | |
| CHA1629-0113PM | SETTLING BLOCK | 1 | |
| CHA700-189 | RETAINING BLOCK | 1 | |
| CHA705-1030 | SETTLING BLOCK | 1 | |
| CHA705-649 | SETTING BLOCK | 1 | |
| CHA723-1123 | SETTING BLOCK | 1 | |
| CHA740-125 | HOLDING BLOCK | 1 | |
| CI682 | Starrett 268A V-BLOCKS (ONE PAIR) | 1 | |
| CM4334 | LOCKING PLIER W/BLOCK | 1 | |
| CP21535 | Trunnion Block | 1 | |
| CP30502/2-1 | TRUNNION BLOCK/MOUNT | 1 | |
| CP30600-1 | ENGINE STAND TRUNNION BLOCK | 2 | |
| CP30600/1 | ENGINE STAND TRUNNION BLOCK-CP30600/1 | 2 | |
| CRES 17-4PH | BOMBARDIER CHALLENGER EDDY CURRENT SURFACE BLOCK CRES 17-4PH STEEL. PART6 78-30-06 PAGE 27, 0.008", 0.020" and 0.040" EDM NOTCHES. Includes Certification Report Tracable to NIST. | 2 | |
| CRK9916 | DRIVER AND BIT STORAGE BLOCK | 1 | |
| CRS 1 AL6061 | 6 STEP CALIBRATION BLOCK. STEP THICKNESS: 0.020", 0.040", 0.060", 0.100", 0.150", 0.200" +/- .001". STEP PAD SIZE: 1.0" x 1.0". MATERIAL: 6061-T6 ALUMINUM. Includes certification Report Traceable to NIST and Certificate of Conformance. | 1 | |
| CRS 2 AL6061 | 6 STEP CALIBRATION BLOCK. STEP THICKNESS: 0.100", 0.250", 0.400", 0.600", 0.800", 1.000" +/- .001". STEP PAD SIZE: 1.0" x 1.0". MATERIAL: 6061-T6 ALUMINUM. Includes certification Report Traceable to NIST and Certificate of Conformance. | 1 | |
| CRS AL2024 | 5 STEP CALIBRATION BLOCK. STEP THICKNESS: 0.200", 0.400", 0.600", 0.800", 1.000" +/- .001". STEP PAD SIZE: 1.0" x 1.0". MATERIAL: 2024-T351 ALUMINUM. Includes certification Report Traceable to NIST and Certificate of Conformance. | 1 | |
| CS-710-503 | PERFORATOR EXTANSION BLOCK | 1 | |
| CS-710-506 | BLOCKING TOOL | 1 | |
| CS-710-507 | BLOCKING TOOL 1 EA ( ALT P/N : 439004006 | 1 | |
| CS-710-559 | BLOCKING HOSE | 1 | |
| CS710-503 | PERFORATOR EXTANSION BLOCK | 1 | |
| CS710-506 | BLOCKING TOOL | 1 | |
| CT780034-501 | Assy Wrench, Blocker Door Bearing | 1 | |
| CTINF9010-6 | TERMINAL BLOCK | 1 | |
| CTJ-R06 | REMOVAL TOOL, TERMINAL BLOCK | 7 | |
| CTJ-R12 | REMOVAL TOOL, TERMINAL BLOCK DOUBLE | 5 | |
| CTSG861-16 | PCB, SWITCH & TERMINAL BLOCK | 1 | |
| D0010 | BLOCK-MICROSWITCH ADJUSTMENT | 1 | |
| D004 | BLOCK UPLOCK UNIT ADJUSTEMENT | 1 | |
| D042239-01 | Connector Block Mount | 1 | |
| D053872-01 | Connector Block | 1 | |
| D11 | REFERENCE BLOCK | 1 | |
| D2-068 | CABRATION BLOCK SET | 1 | |
| D21852-1000 | HOLDING BLOCK TO CHECK THE RADIAL DISTORTION OF THE HALF-WHEELS | 5 | |
| D22925000 | SHOCK ABSORBER BLOCKING ROD | 1 | |
| D27804020000 | BLOCK-SLAT GAPPING | 1 | |
| D46345 | CONNECTING BLOCK | 1 | |
| D46493 | BLOCK - CENTERING | 6 | |
| DAH 601515 | Holding Blocks | 1 | |
| DAH 601760 | Holding Blocks | 1 | |
| DAH 601761 | Holding Blocks | 1 | |
| DAH 602540 | Holding Block | 1 | |
| DAH600515 | HOLDING BLOCK | 1 | |
| DAH600520 | HOLDING BLOCK | 1 | |
| DAH601515 | HOLDING BLOCK | 1 | |
| DAH601760 | BLOCK,HOLDING | 1 | |
| DAH601761 | BLOCK,HOLDING | 1 | |
| DAH601776 | TOOL,TEST BLOCK APPLICATION | 1 | |
| DAH601794 | BLOCKS,HOLDING | 1 | |
| DAH602540 | HOLDING BLOCK | 1 | |
| DAH603062 | BLOCK-HOLDING | 1 | |
| DAH603963 | DAH603963 HOLDING BLOCKS | 1 | |
| DAI-7500-01-00-ST | PRESSURE RELIEF VALVE BLOCKING TOOL | 1 | |
| DAPT65-0094-00 | PUMP HYD HAND (INCLUDES GAUGE,BLOCK,HOSE&COUPLER) | 9 | |
| DB627 | Starrett 566 MAGNETIC V-BLOCK | 1 | |
| DC770 | Starrett 578 V-BLOCK AND CLAMP | 1 | |
| DJ-372-31-50 | DRILL BUSHING SUPPORT BLOCK | 1 | |
| DMC1000-4 | DMC1000-4 - .032 Safe-T-Cable Application Tool Kit with Test Block | 2 | |
| DMC1001-7 | .022" Pre-Set Tension Safe-T-Cable® Application Tool Kit with Test Block | 2 | |
| DMC1001-8 | .022" Pre-Set Tension Safe-T-Cable® Application Tool Kit with Test Block (No Cable Included) | 2 | |
| DMC2271 | DMC2271 Wiring System Service Kit for F-16 Block 70 & All Prior Variants | 2 | |
| DPTS 3225 | TRONZADO BLOCK | 1 | |
| DRAIN-UNBLOCK-TOOL | UNBLOCKING TOOL | 1 | |
| DRT35000-100 | BLOCKS,HOLDING | 1 | |
| DRT66050 | TEST BLOCK - MLG A320NEO | 1 | |
| DRT69543 | SWITCH SETTING BLOCK 1M | 1 | |
| DRT69544 | SWITCH SETTING BLOCK 2M | 1 | |
| DRT74469 | BLOCK CALIBRATION | 2 | |
| DRT94869 | CALIBRATION BLOCK | 1 | |
| DRT95406 | NDT TEST BLOCK TOOL | 1 | |
| DRT95819 | Calibration Block | 1 | |
| DRT96170 | CALIBRATION BLOCK | 1 | |
| DST100-32 | HOLDING BLOCKS | 1 | |
| DST100−32 | Holding Blocks | 1 | |
| DT780026 | Brake Block, Fork, C N A Workstand | 1 | |
| DURAF4409 | 24 IN DURA-BLOCK | 1 | |
| DURAF4411 | DURA DISK SANDING BLOCK | 1 | |
| DURAF4412 | 1/3 RADIUS SANDING BLOCK | 1 | |
| DURAF4417 | 1/3 HOOK AND LOOP BLOCK | 1 | |
| DURAF4418 | 2/3 HOOK AND LOOP BLOCK | 1 | |
| DURAF4419 | FULL HOOK AND LOOP BLOCK | 1 | |
| DURAF4420 | STD BLOCK HOOK AND LOOP | 1 | |
| DURAF4421 | ROUND BLOCK HOOK AND LOOP | 1 | |
| E03462 | MOUNTING BLOCK | 1 | |
| E15053 | MOUNTING BLOCK | 1 | |
| E2-2018550 | TEST BLOCK FOR ESV SOLENOID | 1 | |
| E53-002 | CALIBRATION BLOCK SET EMBRAER | 1 | |
| E53-002C | CALIBRATION BLOCK SET, ALUMINUM 2024-T3, DIMENSION 160 X 135 MM FOR FUSELAGE SINGLE DOUBLER REPAIR’ | 1 | |
| E53-003 | CALIBRATION BLOCK (6SETS) AL 2024 T3 | 1 | |
| E53-003A | CALIBRATION BLOCK SET | 2 | |
| E53-003F | CALIBRATION BLOCK SET | 2 | |
| E53-004 | CALIBRATION BLOCK | 1 | |
| E53‐005 | CALIBRATION BLOCK | 1 | |
| E53‐006 | CALIBRATION BLOCK DIMENSIONS 95 X 90 MM, WITH 03 ALUMINUM PLATES, EDM NOTCH 10.6 MM | 1 | |
| E54‐004 | CALIBRATION BLOCK MADE FROM TITANIUM ALLOY AND ALUMINUM ALLOY AL 7075 T351 | 1 | |
| E55‐001 | CALIBRATION BLOCK | 1 | |
| E55‐002 | CALIBRATION BLOCK | 1 | |
| E57‐009 | CALIBRATION BLOCK, ALUMINUM ALLOY WITH EDM NOTCHES | 1 | |
| E57‐010 | CALIBRATION BLOCK, ALUMINUM ALLOY WITH EDM NOTCHES | 1 | |
| EC-1607 | BLOCK, AUXILARY CONTACT, | 1 | |
| EC-1946-MX02 | CONTACT BLOCK W/ LATCH | 1 | |
| EC-NO-TQ002001 | REFERENCE BLOCK | 1 | |
| ED-TB-NVAL | EDDY CURRENT BLOCK | 1 | |
| EK10C | ADDER BLOCK WITH MOUNTING BASE | 1 | |
| EKC7SETWB | SNAP-ON EXCLUSIVE WOOD BLOCK | 1 | |
| EMB-E54-003 | CALIBRATION BLOCK ALUMINUM 7050-T7452 | 1 | |
| EN 12223 | NDE TECH CALIBRATION BLOCK NO.1 K1 ALUMINUM EN12223 (IIW REF BLOCK) | 1 | |
| EN 27963 | V2 CALIBRATION BLOCK | 1 | |
| EN27963 | CALİBRATION BLOCK (K2) | 1 | |
| ETher Weld Kit | ETher Weld Kit – includes, Probe, Weld, Dia 16.00mm (Medium) 100kHz, Probe, Unshielded, Broad Band, Test Block, Weld Probe, Lead, Lemo 12-Way - Lemo 4-Way, Lead. Lemo 00 to BNC, 1.5m, Butterfly PTFE Tape, Deluxe Probe Case PHDC1, Hard Transit Case | 1 | |
| EX605-60036-001 | NDT BLOCK | 1 | |
| EXBD400-50040-001 | LOWER WING SKIN, CTS – NDT BLOCK | 3 | |
| EXBD400-50093-005 | CALIBRATION BLOCK | 1 | |
| EXBD400-51325-001 | BLOCK, TEST STANDARD | 1 | |
| EXBD400-51325-101 | CALIBRATION BLOCK | 2 | |
| EXGD922-0123-1 | CALIBRATION BLOCK | 1 | |
| EXGM922-5001-23 | CALIBRATION BLOCK | 1 | |
| EXGM922-5004-1 | CALIBRATION BLOCK | 1 | |
| F-1487 | Fixture, Block Pin Setter | 1 | |
| F1120006 | Lower Ironing Block | 1 | |
| F1120007 | Block Ring | 1 | |
| F16-105 | INTAKE PLUG, block 40 models, bi-fold type (wide mouth) | 1 | |
| F16-106 | INTAKE PLUG w/forms pouch, block 40 models, bi-fold type (wide mouth) | 1 | |
| F16-107 | INTAKE PLUG, block 50 models, bi-fold type (wide mouth) | 1 | |
| F16-130 | INTAKE COVER, wide mouth, block 30, 40 & 50 | 1 | |
| F16-132 | INTAKE COVER, block 40/50, w/forms pouch | 1 | |
| F16-200 | EXHAUST COVER, block 32 models, PW F100-220 engine | 1 | |
| F16-201 | EXHAUST PLUG, block 32 models, PW F100-220 engine | 1 | |
| F16-202 | EXHAUST COVER, block 52 models, F100/PW-229 engine | 1 | |
| F16-203 | EXHAUST COVER, block 30 models, GE 110 engine | 1 | |
| F16-205 | EXHAUST PLUG, block 30 models, GE 110 engine | 1 | |
| F16-530 | MAINTENANCE SEAT COVER, block 40, 50, 52 models | 1 | |
| F20.0702 | CAL. BLOCK V1/A2 BS-EN12223 CASE & CERT. | 1 | |
| F26526000 | BLOCK TESTING | 4 | |
| F2MA581800-13 | SAFETY BLOCKS TO HOLD THRUST REVERSER IN DEPLOYED POSITION | 1 | |
| F2MA581800047 | SAFETY BLOCKS TO HOLD THRUST REV. DOORS IN DEPLOYED POSıTıON | 1 | |
| F47878 | CONNECTING BLOCK | 1 | |
| F47881 | CONNECTING BLOCK | 1 | |
| F70199-1G-7 | Allocation block | 1 | |
| F70281 | LOC.BLOCK SET -0 FAN REV COWL RING, JT3D TO HOLD | 1 | |
| F72783 | KIT BLOCK INLET ENGI | 1 | |
| F72794 | PLUG -0 FERRY FLIGHT ENGINE OUTLET USED TO BLOCK | 1 | |
| F72795 | KIT BLOCK EXHAUST EN | 1 | |
| F80027-41 | HORIZONTAL STAB BLOCK | 10 | |
| F80049-12 | LOCK ASSEMBLY - FLIGHT CONTROLS (HYDRAULIC MODULE ELECTRICAL CONTROL BLOCKING TOOL) (THE BOEING COMPANY) | 9 | |
| F80049-2 | LOCK ASSEMBLY - FLIGHT CONTROLS (FLAP BY-PASS VALVE AND HYDRAULIC INTERCONNECT ELECTRICAL CONTROL BLOCKING TOOL)(AFT) (S (THE BOEING COMPANY) | 6 | |
| F80173-17 | BLOCK-`O`RING | 1 | |
| FALCON-2000 | FALCON THICKNESS REFERENCE GAUGE BLOCK | 1 | |
| FC36A | BLOCK WRENCH | 5 | |
| FCO20A | BLOCK WRENCH | 4 | |
| FEV1A2 | NDT TEST BLOCK | 1 | |
| FFK9941A2 | WOODEN BLOCK | 5 | |
| FGFB957110 | LFEC REFERENCE BLOCK KIT | 1 | |
| FJ175-1-15 | PISTON END BLOCK | 1 | |
| FJ175-27 | END BLOCK PINS | 1 | |
| FJ175-517 | PISTON END BLOCK KIT | 1 | |
| FJ175-519 | PISTON END BLOCK HARDWARE | 1 | |
| FJ200-20 | TRUNNION BLOCK AND COTTER PIN | 1 | |
| FJ300-20 | TRUNNION BLOCK AND COTTER PIN | 1 | |
| FNC/041-013 | LINK BLOCK | 1 | |
| FPM-1000 | MAGNETIC BLOCK | 1 | |
| FXT-06644 | MOUNTING BLOCK | 1 | |
| FXT-13756 | ACCELEROMETER MOUNTING BLOCK | 1 | |
| G 38004-11 | TOILET UNBLOCK TOOL | 1 | |
| G27036-152 | TURN BLOCK POST | 1 | |
| G27049-28 | Snatch block | 1 | |
| G28019-26 | END CLAMP BLOCK | 1 | |
| G28019-50 | END CLAMP BLOCK | 1 | |
| G38004-10 | TOOL-TOILET UNBLOCK | 15 | |
| G38004-11 | TOILET UNBLOCK TOOL | 1 | |
| G38004-13 | EQUIPMENT - REMOVAL, VACUUM LAVATORY SYSTEM BLOCKAGE | 15 | |
| G38004-17 | EQUIPMENT - REMOVAL, VACUUM LAVATORY SYSTEM BLOCKAGE | 7 | |
| G38006-1 | Blockage Removal Equipment - Vacuum Waste System | 15 | |
| G415-272003-1 | ADJUSTMENT BLOCK | 1 | |
| G601-780013-1 | THRUST REVERSER SLIDER BLOCKTING TOOL | 1 | |
| G698−278102−101 | Slat Rigging Blocks #3 | 1 | |
| G71012-24 | LOCATING BLOCK | 1 | |
| G78009 | GAUGE - WEAR MEASUREMENT, T/R BLOCKER DOOR | 1 | |
| G78009-1 | Gauge - Wear Measurement, Thrust Reverser Blocker Door | 8 | |
| G78009-2 | Gauge-wear measurement，T/R blocker door | 1 | |
| G78009-35 | Gauge-wear measurement，T/R blocker door | 2 | |
| GA3634A-1 | LOCKING PLIER W/BLOCK | 1 | |
| GFBP020 | PULLEY BLOCK WITH BRAKE AND ROPE | 1 | |
| GR000066 | ADAPTOR,EXTRACTION BLOCK | 1 | |
| GR000067 | DRIVE BLOCK PRESSING-IN TOOL | 1 | |
| GS13777-1 | SHIMMING BLOCK, DROOP LINKAGE | 2 | |
| GS13909-1 | SCREW SET, HOLDING BLOCK | 1 | |
| GS15396-1 | BLOCK SHIMMING | 1 | |
| GS20834-1 | WIRE LEAD BLOCK POSITIONING TOOL | 4 | |
| GS22471-1 | Loading Block | 2 | |
| GS22497-1 | BLOCK, LOADING | 2 | |
| GS23960-1 | Wire lead block positioning tool | 1 | |
| GSE 503 | CALIBRATION BLOCK | 1 | |
| GSE55759 REVA | AFT AXLE STEERING SAFETY PIN & Block | 1 | |
| H1X3006 | HANDLE, OPEN BLOCKER DOOR | 1 | |
| H341ADV202M | REFERENCE BLOCK | 1 | |
| HA-350A93-3203-20 | SPECIAL TOOL (SEAL, BUSH INSTALLATION BLOCK) | 1 | |
| HA-350A93-3206-20 | BLOCK- MODIFIED FOR NEW SEAL | 1 | |
| HA-350A93-3712-00 | ASSEMBLY BLOCK, ROTATING STAR | 1 | |
| HA-350A93-3713-00 | ASSEMBLY BLOCK, NON-ROTATING STAR/ROTATING STAR | 1 | |
| HIX3002 | HOLD OPEN BLOCK ROD | 17 | |
| HIX3002-0G | HOLD OPEN ROD, BLOCK DOOR | 4 | |
| HIX3006 | HANDLE, OPEN BLOCKER DOOR | 3 | |
| HIX3006 REV A | HANDLE OPEN BLOCKER DOOR; A320 | 1 | |
| HLA6564 | Brake Bleeding Case (4 Blocks) | 1 | |
| HP-6150-15 | LOCKING BLOCK | 1 | |
| HP-6150-35 | LOCKING BLOCK ASSEMBLY | 1 | |
| HR516-911-11 | 49 PIECE STEEL GAUGE BLOCK SET INCH* | 1 | |
| HSP3293 | BLOCK TEST VALV PEENER | 1 | |
| HU21572 | ADAPTER - DISTRIBUTOR BLOCK TO INT. WHEEL CASE & TURBINE BEARINGS | 1 | |
| HU26507 | SETTING BLOCK | 1 | |
| HU29201 | SETTING BLOCKS | 1 | |
| HU41507 | LOCATION BLOCK | 1 | |
| HU41599 | REACTION BLOCK | 1 | |
| HU44762 | SETTING BLOCKS | 1 | |
| HU80618 | BLOCK - LOCATION. INSTALLATION / REMOVAL OF THE LP (31) MODULE | 2 | |
| HU81261 | LOCATION/SUPPORT BLOCK - R/I LP COMPRESSOR | 1 | |
| HU81262 | LOCATION SUPPORT BLOCK - R I LP COMPRESSOR | 1 | |
| HU81280 | BLOCK - SUPPORT, INSTALLATION / REMOVAL OF THE LP (31) MODULE | 1 | |
| HU81900 | CALIBRATION BLOCK | 1 | |
| HU81924 | KIT FOR RB211-524 ENGINES CONTAINING PROBE 1027388 AND BLOCK QC6852. | 1 | |
| HU81925 | KIT FOR RB211-535 ENGINES CONTAINING PROBE 1027421 AND BLOCK QC6854 | 2 | |
| HXC-16157B-10 | Swaging block | 1 | |
| Holding Block No.1 | Honeywell Holding Block No.1, 32-49-01 page 4.E.-3. Includes Test Report and Certificate of Conformance. | 1 | |
| Holding Block No.2 | Honeywell Holding Block No.2, 32-49-01 page 4.E.-4. Includes Test Report and Certificate of Conformance. | 1 | |
| IAE 1P18865-1 | RETENTION BLOCKS | 1 | |
| IAE 1P18865-2 | RETENTION BLOCK | 1 | |
| IAE 2R19442 | ULTRASONIC PROBE AND TEST BLOCK | 1 | |
| IAE1J12414 | HOLDING BLOCK | 1 | |
| IAE1J12556 | BLOCK, MEASURING | 1 | |
| IAE1J13210 | IAE 1J13210 LPC HOLDING BLOCK | 1 | |
| IAE1M14038 | IAE 1M14038 RETAINING BLOCK | 1 | |
| IAE1M14094 | RETAINING BLOCK | 1 | |
| IAE1R18087 | BLOCK, MEASURING | 1 | |
| IAE2P18879 | CALIBRATION BLOCK | 1 | |
| IAE2R18901 | TEST BLOCK-TRANSIENT ACOUSTIC PROPAGATION | 7 | |
| IAE2R18902 | TEST BLOCK-TRANSIENT ACOUSTIC PROPAGATION | 4 | |
| IAE2R18939 | CALIBRATION BLOCK | 1 | |
| IAE2R19426 | BLOCK EDDY CURRENT INSPECTION | 2 | |
| IAE2R19426 CLB | BLOCK EDDY CURRENT INSPECTION | 1 | |
| IAE2R19426B | Calibration Block | 1 | |
| IAE2R19427 | BLOCK EDDY CURRENT INSPECTION | 5 | |
| IAE2R19429 | Kit- Test block and Ultrasonic probe | 6 | |
| IAE2R19442 | ULTRASONIC PROBE AND TEST BLOCK | 1 | |
| IAE2R19921 | TEST BLOCK-TRANSIENT ACOUSTIC PROPAGATION | 3 | |
| IAE3R19134 | ALLMEN BLOCKS | 1 | |
| IIW TYPE 2 | CALIBRATION REFERENCE STANDARD BLOCK, ALUMINUM. (GE OR EQUIVALENT) | 1 | |
| IIW-TYPE 2 | CALIBRATION BLOCK | 1 | |
| IIW-TYPE-2-AL | REFERENCE BLOCK (NDT) | 1 | |
| IIWTYPE1 | CALIBRATION BLOCK | 1 | |
| J20006-29 | Interblock | 2 | |
| J21843 | SUPPORT BLOCK RETAINING NUT | 1 | |
| J21844 | SUPPORT BLOCK GLAND | 1 | |
| J27017-5 | CALIBRATION BLOCK | 1 | |
| J27017-6 | CALIBRATION BLOCK | 1 | |
| J27020-10 | Calibration block | 1 | |
| J27020-9 | Calibration block | 1 | |
| J27139-1 | Main track setting block assy | 1 | |
| J32010-26 | ANGLED BLOCK | 1 | |
| J32010-28 | ROUNDED BLOCK | 1 | |
| J32014-90 | CENTERING BLOCK | 1 | |
| J32037-91 | SPRING BLOCK | 1 | |
| J32061-17 | RUBBING BLOCK | 1 | |
| J32072-10 | HAND BLOCK | 1 | |
| J32072-14 | HAND BLOCK | 1 | |
| J32072-31 | HAND BLOCK | 1 | |
| J36006-6 | PIN BLOCK | 1 | |
| J46006 | HOLDING BLOCKS | 1 | |
| J46011 | HOLDING BLOCKS | 1 | |
| J46044 | HOLDING BLOCK | 1 | |
| J46045 | HOLDING BLOCK | 1 | |
| J46159 | HOLDING BLOCKS | 1 | |
| J47200 | HOLDING BLOCK | 10 | |
| J47963-1 | HOLDING BLOCK | 1 | |
| J52023-15 | RETAINING BLOCK | 1 | |
| J52030-12 | FWD HINGE BLOCK | 1 | |
| J52030-13 | AFT HINGE BLOCK | 1 | |
| J71005-96 | CENTER BLOCK | 1 | |
| J71007-7 | REACTION BLOCK | 1 | |
| J71038-20 | Standoff block | 1 | |
| J71038-56 | HINGE BLOCK | 1 | |
| JMP/STD/B/0995 | BLOCK, REGULATOR MOUNTING 1 | 1 | |
| K-2105 | KIT, MANIFOLD BLOCK | 5 | |
| K1 | CALIBRATION BLOCK | 4 | |
| K2 | STANDARD UT CALIBRATION BLOCK | 7 | |
| K27037-12 | Preload block assy slat 6 & 7 inbd | 1 | |
| K27037-15 | Roller rigging block assy-INBD | 1 | |
| K27037-16 | Roller rigging block assy-OUTBD | 1 | |
| K27037-18 | Main track setting block | 1 | |
| K27037-3 | Preload block assy slat 1 & 12 inbd | 1 | |
| K27037-49 | Roller Rigging Block Assy | 1 | |
| K27037-55 | Inbd Roller Rigging Block | 1 | |
| K27037-6 | Preload block assy slat 2 & 11 inbd | 1 | |
| K27037-79 | Main track setting block assy | 1 | |
| K27037-8 | Preload block assy slat 3 & 10 inbd | 1 | |
| K27058-4 | INDEX BLOCK | 1 | |
| K55006-123 | INDEX BLOCK ASSY | 1 | |
| K55006-97 | INDEX BLOCK ASSY | 1 | |
| K55006-98 | INDEX BLOCK ASSY | 1 | |
| K78006-1 | TOOL-PIN BLOCK VALV PROPUL AERO ENGINE | 11 | |
| KBBB-12-0-N-1 | Backup Block - Alternate Tooling for Countersunk Holes | 1 | |
| KBBB-12-1-N-1 | Backup Block - Alternate Tooling for Countersunk Holes | 1 | |
| KBBB-12-2-N-1 | Backup Block - Alternate Tooling for Countersunk Holes | 1 | |
| KBBB-12-3-N-1 | Backup Block - Alternate Tooling for Countersunk Holes | 1 | |
| KBBB-14-0-N-1 | Backup Block - Alternate Tooling for Countersunk Holes | 1 | |
| KBBB-14-1-N-1 | Backup Block - Alternate Tooling for Countersunk Holes | 1 | |
| KBBB-14-2-N-1 | Backup Block - Alternate Tooling for Countersunk Holes | 1 | |
| KBBB-14-3-N-1 | Backup Block - Alternate Tooling for Countersunk Holes | 1 | |
| KBBB-16-0-N-1 | Backup Block - Alternate Tooling for Countersunk Holes | 1 | |
| KBBB-16-1-N-1 | Backup Block - Alternate Tooling for Countersunk Holes | 1 | |
| KBBB-16-2-N-1 | Backup Block - Alternate Tooling for Countersunk Holes | 1 | |
| KBBB-16-3-N-1 | Backup Block - Alternate Tooling for Countersunk Holes | 1 | |
| KBBB-18-0-N-1 | Backup Block - Alternate Tooling for Countersunk Holes | 1 | |
| KBBB-18-1-N-1 | Backup Block - Alternate Tooling for Countersunk Holes | 1 | |
| KBBB-18-2-N-1 | Backup Block - Alternate Tooling for Countersunk Holes | 1 | |
| KBBB-18-3-N-1 | Backup Block - Alternate Tooling for Countersunk Holes | 1 | |
| KBBB-20-0-N-1 | Backup Block - Alternate Tooling for Countersunk Holes | 1 | |
| KBBB-20-1-N-1 | Backup Block - Alternate Tooling for Countersunk Holes | 1 | |
| KBBB-20-2-N-1 | Backup Block - Alternate Tooling for Countersunk Holes | 1 | |
| KBBB-20-3-N-1 | Backup Block - Alternate Tooling for Countersunk Holes | 1 | |
| L72 BLOCK | British Aerospace test block. Material: 2024-T3 Aluminum .128: thick. Includes Test Report and Certificate of Conformance. | 1 | |
| L9300340-005 | SKIN BLOCK, 2024-T3511, 9"LONG, .869" THICK, 1.98" WIDE | 1 | |
| LHH1B | 1 TON CHAIN/BLOCK | 1 | |
| LIL71880 | TERMINAL BLOCK TOOL | 1 | |
| LISBTOP-80 | BUTCHER BLOCK TOP 60IN X 30IN | 1 | |
| LISBTOP-81 | BUTCHER BLOCK TOP 72IN X 30IN | 1 | |
| LISBTOP-9030 | 90INx30IN BUTCHER BLOCK | 1 | |
| LISQMIKES176 | HS HOUSING W/BUTCHER BLOCK TOP | 1 | |
| LL551A085 | SETTLING BLOCK | 1 | |
| LLA551A095 | SETTLING BLOCK | 1 | |
| LST52592 | V BLOCKS(2)ANDCLAMPS(MATCHPAIR | 1 | |
| LST64960 | V BLOCK AND CLAMP | 1 | |
| LSW7075 | 8 STEP BLOCK - 2 UNIT - AL BLOCK CONSIST OF 8 DIFFERENT THICKNESS (1MM, 2MM, 3MM, 4MM, 5MM, 6MM, 7MM, 8MM)AS BELOW. - MATERIAL AL2024 | 1 | |
| LT145.011-HRD-AL | Reference block for NDT | 1 | |
| LTCT30614-01 | Fuel Control, Fuel Pump Instrumentation, Block Fuel Temperature Assembly | 1 | |
| M006-01H038-101 | BLOCKING RING | 1 | |
| M100000245A | ULTRASONIC REFERENCE BLOCK | 1 | |
| M21862 | HOLDING BLOCK FOR CHECKING THE RADIAL DISTORTION OF THE HALF-WHEELS | 9 | |
| M305 | BLOCK - TEST BERGEN CABLES | 2 | |
| M46690 | GUIDE FOR THE FITTING OF THE DRIVE BLOCK | 5 | |
| M46697 | HYDRAULIC CONNECTING BLOCK | 1 | |
| M46699 | HYDRAULIC CONNECTING BLOCK | 2 | |
| M46701 | HYDRAULIC CONNECTING BLOCK | 2 | |
| M46921 | SEATING BLOCK COMP PISTON SPRING | 1 | |
| M47036 | HOLDING BLOCK | 1 | |
| M65723228 | Blocking | 1 | |
| M81714/69-01 | EXTRACT TOOL - TERMINAL BLOCK | 4 | |
| MAB Block-S | CALIBRATION BLOCKS | 1 | |
| MAB-CS | ROMPAS BLOCK, 7075-T6 or 7075-T73 ALUMINUM ½" (12.5mm) or 1" (25.4 mm) thick, 1" radius opposite 2" radius, with 5/64" diameter side drilled hole (3/4" deep flat bottom hole in 1" thick version). SPECIFICATION: ASTM E-164. (Includes wooden case). Note: | 1 | |
| MACCW7 | COUNTER WEIGHT: BLOCKS,SET, | 2 | |
| MAGNA.IA MATL 2024-T3. | MAGNA-THIN STEP BLOCK PRODUCT ID: | 1 | |
| MAGNET-BLOCK | SMALL BLOCK MAGNET TOOL | 1 | |
| MAT/ULT/183 | MAT/ULT/TP183 - BLOCK, CALIBRATION TEST | 2 | |
| MAT/ULT/TP183 | BLOCK, CALIBRATION TEST | 1 | |
| MATULT183 | MAT/ULT/TP183 - BLOCK, CALIBRATION TEST | 2 | |
| MBBBT100 | ELCH ELASTICITY LAMINATE CHECKER (WITH CALIBRATION BLOCK FS1). | 3 | |
| MBBGCFRPHC200 | REFERENCE BLOCK | 1 | |
| MBEU186058 | PARACHUTE PACKING BOX AND BLOCKS KIT | 1 | |
| MBEU8463 | CLAMP BLOCKS-PAIRS, EJECTION GUN | 1 | |
| MCI06423008 | IMPORT ANGLE BLOCK SET | 1 | |
| MCI86280948 | .1000 RECTANGLAR CASE BLOCK | 1 | |
| MD80-53-303 | Calibration Block | 1 | |
| ME65B82830-1-INC | BLOCK, LESS PLATING | 1 | |
| ME65B98000 | RETAINING CLAMP - BLOCKER DOOR, FAN REVERSER, JT9D-3 AND -7 | 1 | |
| MER 81-20-01A | TEST BENCH AP BLOCK | 1 | |
| MHS-29-1A-0 | CALIBRATION BLOCK, OLYMPUS PN MHS‐29‐1A‐0, ALUMINUM ALLOY WITH EDM HOLES (FROM: 1/8 IN TO 1 IN) | 1 | |
| MHS‐29‐1A‐0 | CALIBRATION BLOCK, OLYMPUS PN MHS‐29‐1A‐0, ALUMINUM ALLOY WITH EDM HOLES (FROM: 1/8 IN TO 1 IN) | 1 | |
| MIT1026-63 PM | BLOCK-HOLDING | 1 | |
| MM506-01 | TOOL SILENT BLOCK ASSEMBLY | 1 | |
| MP90 /1-3M | CALIBRATION BLOCK | 1 | |
| MR-5549 | Funcional block según documento | 1 | |
| MR3MF | REFERENCE BLOCK | 2 | |
| MROAJ608C4100-009 | ASSEMBLY TOOL - LINK ARM, BLOCKER DOOR, GENX-2B | 1 | |
| MT1026 | HOLDING BLOCKS | 1 | |
| MT1026-104 | HOLDING BLOCKS | 1 | |
| MT1026-130 | MT1026/130 HOLDING BLOCKS | 1 | |
| MT1026-130PM | MT1026/130 HOLDING BLOCKS | 1 | |
| MT1026-63 | BLOCK-HOLDING | 2 | |
| MT1026/107 | HOLDING BLOCKS | 1 | |
| MT1026/130 | Holding Blocks | 1 | |
| MT1026/63 | Holding Blocks | 2 | |
| MT1026/82 | BLOCKS HOLDING | 1 | |
| MT102682 | BLOCKS HOLDING | 1 | |
| MT146-2 | BLOCK - LOWER SWASHPLATE RIGGING | 1 | |
| MT146-3 | BLOCKS-LOWER SWASH PLATE RIGGING | 1 | |
| MT146-4 | BLOCK - LOWER SWASHPLATE RIGGING | 1 | |
| MT146-4/PHP | BLOCK - LOWER SWASHPLATE RIGGING | 1 | |
| MT376-1 | Blocks - MR Rigging | 1 | |
| MT559-1 | Blocks - MR Rigging R | 2 | |
| MT559-1/PHP | BLOCKS - MR RIGGING R | 1 | |
| N/A-2 | REFERENCE BLOCK SUB SURFACE - NDT 396 | 1 | |
| N/A-3 | REFERENCE BLOCK - NDT 3023 | 1 | |
| N/A-4 | REFERENCE BLOCK - NDT 3021 | 1 | |
| NB602672LONGCT | GAGE BLOCKS, RANGE: 0 TO 48 INCH, 8 PIECE SET, ACC | 1 | |
| NCS 64011 | TOOL - BLOCKER DOOR BUSH INSERT/EXTRACT | 2 | |
| NCS64011 | Tool − Blocker Door Bushing Insert/Extract | 2 | |
| NDE FLAW TECH-STEP WEDGE-1544 | STEP WEDGE CALIBRATION BLOCK ALUMINUM | 1 | |
| NDETECH-7233 | V2 BLOCK ALUMINUM | 1 | |
| NDT | NDT REFERENCE BLOCK | 1 | |
| NDT 1022 | Calibration Block | 3 | |
| NDT 1023 | Calibration Block | 2 | |
| NDT 1024 | Calibration Block | 2 | |
| NDT 1025 | Calibration Block | 2 | |
| NDT 1026 | Calibration Block | 2 | |
| NDT 1027 | Calibration Block | 2 | |
| NDT 1087-1..4 | Calibration Block | 3 | |
| NDT 1087-14 | CALIBRATION BLOCK | 3 | |
| NDT 1088 | Calibration Block | 1 | |
| NDT 1094-XXX-A | Calibration Block | 1 | |
| NDT 1095 | Calibration Block | 2 | |
| NDT 1099 | Calibration Block | 4 | |
| NDT 3021 | REFERENCE BLOCK | 6 | |
| NDT 3023 | REFERENCE BLOCK | 4 | |
| NDT 3038 | Calibration Block | 4 | |
| NDT 3092 | Calibration Block | 2 | |
| NDT 369 | CALIBRATION BLOCK | 2 | |
| NDT 396 | REFERENCE BLOCK SUB SURFACE | 6 | |
| NDT 512 | Calibration Block | 1 | |
| NDT 514 | Calibration Block | 1 | |
| NDT 515 | Calibration Block | 2 | |
| NDT 516 | Calibration Block | 1 | |
| NDT 519 | Calibration Block | 1 | |
| NDT 527 | Calibration Block | 1 | |
| NDT 537 | Calibration Block | 2 | |
| NDT 546 | Calibration Block | 1 | |
| NDT A306 | REFERENCE BLOCK SET | 1 | |
| NDT-1088-072-050 | BLOCK STANDARD | 4 | |
| NDT-3014TI | TI CALIBRATION BLOCK 8 STEPS(1-8MM) | 1 | |
| NDT-396 | CALIBRATION BLOCK | 6 | |
| NDT1004 | REFERENCE BLOCK | 1 | |
| NDT1016 | Calibration Block | 3 | |
| NDT1017 | Calibration Block | 2 | |
| NDT1018 | Calibration Block | 3 | |
| NDT1019 | Calibration Block | 3 | |
| NDT1020 | Calibration Block | 2 | |
| NDT1021 | Calibration Block | 2 | |
| NDT1022 | CALIBRATION BLOCK | 3 | |
| NDT1024 | REFERENCE BLOCK | 2 | |
| NDT1025 | REFERENCE BLOCK | 2 | |
| NDT1039-t1 | Calibration Block | 1 | |
| NDT1039-t2 | Calibration Block | 1 | |
| NDT1048 | CALIBRATION BLOCK | 4 | |
| NDT1052 | REFERENCE BLOCK | 1 | |
| NDT1062 | REFERENCE BLOCK | 2 | |
| NDT1072 | NDT REFERENCE BLOCK (ET ) | 2 | |
| NDT1074 | REFERENCE BLOCK | 2 | |
| NDT1084 | Calibration Block | 1 | |
| NDT1084-1 | Calibration Block | 1 | |
| NDT1084-2 | Calibration Block | 1 | |
| NDT1084-3 | Calibration Block | 1 | |
| NDT1086-050 | Calibration Block | 3 | |
| NDT1087 | REFERENCE BLOCK | 1 | |
| NDT1087-1 | CALIBRATION BLOCK | 4 | |
| NDT1087-2 | CALIBRATION BLOCK | 3 | |
| NDT1087-3 | CALIBRATION BLOCK | 3 | |
| NDT1087-4 | CALIBRATION BLOCK | 3 | |
| NDT1087-7 | REFERENCE BLOCK | 2 | |
| NDT1087-8 | REFERENCE BLOCK | 2 | |
| NDT1096-050 | Calibration Block | 1 | |
| NDT1096-070 | Calibration Block | 1 | |
| NDT1097-B | REFERENCE BLOCK (NDTM PART 6 53-30-25) | 2 | |
| NDT1106 | CALIBRATION BLOCK | 2 | |
| NDT126 | REFERENCE BLOCK | 1 | |
| NDT185 | REFERENCE BLOCK | 1 | |
| NDT188A | REFERENCE BLOCK | 1 | |
| NDT194B | CALIBRATION BLOCK | 2 | |
| NDT3001 | Calibration Block | 2 | |
| NDT3004 | BLOCK CALIBRATION | 3 | |
| NDT3012 | Calibration Block | 1 | |
| NDT3016B | REFERENCE BLOCK | 1 | |
| NDT3021 | Calibration Block | 6 | |
| NDT3023 | Calibration Block | 4 | |
| NDT3024A | Calibration Block | 2 | |
| NDT3038-P1 | Calibration Block | 3 | |
| NDT3049 | Calibration Block | 2 | |
| NDT3050 | Calibration Block | 4 | |
| NDT3051 | REFERENCE BLOCK | 1 | |
| NDT3055B | CALIBRATION BLOCK | 2 | |
| NDT3065-STL | Calibration Block | 2 | |
| NDT3068 | Calibration Block | 5 | |
| NDT3091 | REFERENCE BLOCK | 2 | |
| NDT3098 | REFERENCE BLOCK | 1 | |
| NDT3099 | REFERENCE BLOCK | 2 | |
| NDT3102 | REFERENCE BLOCK | 1 | |
| NDT3104 | REFERENCE BLOCK | 2 | |
| NDT3105 | REFERENCE BLOCK | 1 | |
| NDT3107 | REFERENCE BLOCK | 1 | |
| NDT3109 | REFERENCE BLOCK | 1 | |
| NDT3116 | REFERENCE BLOCK | 2 | |
| NDT3118 | Calibration Block | 3 | |
| NDT3129 | REFERENCE BLOCK | 1 | |
| NDT3130 | REFERENCE BLOCK | 1 | |
| NDT3131 | REFERENCE BLOCK | 1 | |
| NDT3132 | REFERENCE BLOCK | 1 | |
| NDT3133 | REFERENCE BLOCK | 2 | |
| NDT3136 | REFERENCE BLOCK | 1 | |
| NDT3141 | CALIBRATION BLOCK | 2 | |
| NDT3141G1 | CALIBRATION BLOCK | 2 | |
| NDT3142 | REFERENCE BLOCK | 2 | |
| NDT3149 | REFERENCE BLOCK | 2 | |
| NDT3152-A | Calibration Block | 3 | |
| NDT3153-I | REFERENCE BLOCK SET | 1 | |
| NDT3159 | NDT REFERENCE BLOCK (ET ) | 4 | |
| NDT3166-006 | CALIBRATION BLOCK | 4 | |
| NDT3167-I | REFERENCE BLOCK SET | 1 | |
| NDT3170 | Calibration Block | 5 | |
| NDT3171 | Calibration Block | 5 | |
| NDT3191 | REFERENCE BLOCK | 2 | |
| NDT3202 | REFERENCE BLOCK | 1 | |
| NDT3207 | REFERENCE BLOCK | 1 | |
| NDT3208 | REFERENCE BLOCK | 1 | |
| NDT3209A | REFERENCE BLOCK | 2 | |
| NDT3218 | REFERENCE BLOCK | 2 | |
| NDT3219 | REFERENCE BLOCK | 2 | |
| NDT3221 | REFERENCE BLOCK | 2 | |
| NDT3229 | REFERENCE BLOCK | 2 | |
| NDT3230 | REFERENCE BLOCK (BOEING BONDED STANDARD 737) | 2 | |
| NDT3233 | REFERENCE BLOCK (BOEING BONDED STANDARD 737) | 2 | |
| NDT3249 | CALIBRATION BLOCK | 1 | |
| NDT3250 | CALIBRATION BLOCK | 1 | |
| NDT3251 | REFERENCE BLOCK | 1 | |
| NDT3252 | REFERENCE BLOCK | 1 | |
| NDT3259 | REFERENCE BLOCK | 1 | |
| NDT3260 | REFERENCE BLOCK | 1 | |
| NDT3267-0.040-0.040 | REFERENCE BLOCK | 1 | |
| NDT3267-0.050-0.040 | REFERENCE BLOCK | 1 | |
| NDT3267-0.063-0.056 | REFERENCE BLOCK | 1 | |
| NDT3267-0.080-0.063 | REFERENCE BLOCK | 1 | |
| NDT3276 | REFERENCE BLOCK | 2 | |
| NDT3276A | REFERENCE BLOCK | 2 | |
| NDT3278A | REFERENCE BLOCK | 2 | |
| NDT3278B | REFERENCE BLOCK | 2 | |
| NDT3278C | REFERENCE BLOCK | 2 | |
| NDT3279 | REFERENCE BLOCK | 1 | |
| NDT3280 | REFERENCE BLOCK | 1 | |
| NDT3285 | REFERENCE BLOCK | 2 | |
| NDT3289 | REFERENCE BLOCK | 2 | |
| NDT3291 | REFERENCE BLOCK | 2 | |
| NDT3292 | REFERENCE BLOCK | 2 | |
| NDT3293 | REFERENCE BLOCK | 2 | |
| NDT3294 | REFERENCE BLOCK | 2 | |
| NDT3295 | REFERENCE BLOCK | 2 | |
| NDT3296 | REFERENCE BLOCK | 2 | |
| NDT3297 | REFERENCE BLOCK | 2 | |
| NDT3298 | REFERENCE BLOCK | 2 | |
| NDT3299 | REFERENCE BLOCK | 2 | |
| NDT3301A | CALIBRATION BLOCK | 1 | |
| NDT3302 | CALIBRATION BLOCK | 1 | |
| NDT3304-A | REFERENCE BLOCK | 2 | |
| NDT3312 | CALIBRATION BLOCK | 2 | |
| NDT369 | Calibration Block | 2 | |
| NDT392 | Calibration Block | 1 | |
| NDT396 | Calibration Block | 6 | |
| NDT404 | REFERENCE BLOCK | 1 | |
| NDT405 | REFERENCE BLOCK | 1 | |
| NDT4059 | REFERENCE BLOCK | 1 | |
| NDT406 | REFERENCE BLOCK | 1 | |
| NDT4062A | REFERENCE BLOCK | 1 | |
| NDT4062B | REFERENCE BLOCK | 1 | |
| NDT4062C | REFERENCE BLOCK | 1 | |
| NDT408 | REFERENCE BLOCK | 1 | |
| NDT410 | REFERENCE BLOCK | 1 | |
| NDT4126A | CALIBRATION BLOCK | 1 | |
| NDT432 | REFERENCE BLOCK | 1 | |
| NDT435 | REFERENCE BLOCK | 1 | |
| NDT436 | REFERENCE BLOCK | 1 | |
| NDT439 | REFERENCE BLOCK | 1 | |
| NDT440 | REFERENCE BLOCK | 1 | |
| NDT441 | REFERENCE BLOCK | 1 | |
| NDT446 | REFERENCE BLOCK | 1 | |
| NDT447 | REFERENCE BLOCK | 1 | |
| NDT448 | REFERENCE BLOCK | 1 | |
| NDT449 | REFERENCE BLOCK | 1 | |
| NDT460 | REFERENCE BLOCK | 1 | |
| NDT471 | REFERENCE BLOCK | 1 | |
| NDT475 | REFERENCE BLOCK | 1 | |
| NDT5097-A | CALIBRATION BLOCK | 2 | |
| NDT5097-D | CALIBRATION BLOCK | 1 | |
| NDT514 | Calibration Block | 1 | |
| NDT528 | Calibration Block | 1 | |
| NDT531 | Calibration Block | 1 | |
| NDT542 | Calibration Block | 1 | |
| NDT555 | Calibration Block | 1 | |
| NDT562 | Calibration Block | 1 | |
| NDT575 | Calibration Block | 1 | |
| NDT578 | Calibration Block | 1 | |
| NDT7005 | CALIBRATION BLOCK | 2 | |
| NDT7020 | CALIBRATION BLOCK | 1 | |
| NDT7031A | CALIBRATION BLOCK | 2 | |
| NDT7031B | CALIBRATION BLOCK | 2 | |
| NDT710 | CUSTOM NAVY BLOCK. MATERIAL: 304 STAINLESS STEEL ,CONTAINING 20 FASTENER HOLES (.156-.750) WITH A TOTAL OF 71 EDM NOTCHES NOTCHES. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT753 | CALIBRATION BLOCK P/N: NDT753 | 2 | |
| NDT757A | CALIBRATION BLOCK | 1 | |
| NDT801 | NDT BLOCK TOOL | 1 | |
| NDT803A | REFERENCE BLOCK | 2 | |
| NDT803B | REFERENCE BLOCK | 2 | |
| NDTUT554001 | CUSTOM HAECO COMPOSITE LAMINATE STEP REFERENCE BLOCK, 1,5,9,12,13,17,18,24,25, & 30 PLYS. 1.5" x 1.5" Step Pad Size. Includes C-Scan Test Report and Certificate of Conformance. | 1 | |
| NEC8139 | CALIBRATION BLOCK | 1 | |
| NO.SSTYPE301 | NDT-TEST BLOCK | 1 | |
| NO.ST4340 | NDT-TEST BLOCK | 1 | |
| NRK-3A/2024-T3 | CUSTOM NAVY BLOCK 2024-T3 ALUMINUM. CONTAINS 20 FASTENER HOLES (.156-.750) WITH A TOTAL OF 71 EDM NOTCHES. Includes Test Report and Certificate of Confromance. | 1 | |
| NRK-3AL | CUSTOM NAVY BLOCK 7075-T6 ALUMINUM. CONTAINS 20 FASTENER HOLES (.156-.750) CONTAINING A TOTAL OF 71 EDM NOTCHES. Includes Test Report and Certificate of Confromance. | 2 | |
| NRK-3AL-6061 | CUSTOM NAVY BLOCK 6061-T6,20 FASTENER HOLES (.156-.750) CONTAINING A TOTAL OF 71 EDM NOTCHES. Includes Test Report and Certificate of Confromance. | 1 | |
| NRK-3AST | CUSTOM NAVY BLOCK SET, 3 Blocks Total. Materials: 7075-T6 Aluminum, 4340 Cres Steel and 6AL-4V Titanium. Each Standard Includes 20 Fastener Holes (.156-.750) Containing a total of 71 EDM Notches. All Standards Manufactured in Accordance with U.S.A.F. ... | 1 | |
| NRK-3I | CUSTOM NAVY BLOCK. MATERIAL: 718 INCONEL CONTAINING 20 FASTENER HOLES (.156-.750) WITH A TOTAL OF 71 EDM NOTCHES. Includes Test Report and Certificate of Conformance. | 1 | |
| NRK-3MAG | CUSTOM NAVY BLOCK AZ 31 MAGNESIUM, 20 FASTENER HOLES (.156-.750) CONTAINING A TOTAL OF 71 EDM NOTCHES. Includes Test Report and Certificate of Confromance. | 1 | |
| NRK-3S/400SS | CUSTOM NAVY EDDY CURRENT BLOCK. Material: 400 Stainless Steel. 3 Plate assembly measuring 4" x 7" x .875", Contains 20 fastener holes with diameters ranging from .156" – .750"., 71 EDM notches in various locations (notch depth & lengths vary), Widths for | 1 | |
| NRK-3S/HX | CUSTOM NAVY EDDY CURRENT BLOCK. Material: Hastelloy X, 3 Plate assembly measuring 4" x 7" x .875", Contains 20 fastener holes with diameters ranging from .156" – .750"., 71 EDM notches in various locations (notch depth & lengths vary), Widths for all notc | 1 | |
| NRK-3SS | CUSTOM NAVY BLOCK. MATERIAL: 304 STAINLESS STEEL ,CONTAINING 20 FASTENER HOLES (.156-.750) WITH A TOTAL OF 71 EDM NOTCHES NOTCHES. Includes Test Report and Certificate of Conformance. | 1 | |
| NRK-3ST | CUSTOM NAVY EDDY CURRENT BLOCK. Material: 4340 Cres Steel. 3 Plate assembly measuring 4" x 7" x .875", Contains 20 fastener holes with diameters ranging from .156" – .750"., 71 EDM notches in various locations (notch depth & lengths vary), Widths for all | 1 | |
| NRK-3T | CUSTOM NAVY EDDY CURRENT BLOCK. Material: 6AL-4V Titanium 3 Plate assembly measuring 4" x 7" x .875", Contains 20 fastener holes with diameters ranging from .156" – .750"., 71 EDM notches in various locations (notch depth & lengths vary), Widths for all n | 1 | |
| NSA937901M22-05 | JUNCTION BLOCK | 1 | |
| NT2542 | RIVATING BLOCK | 1 | |
| OMP2505-2 | COUPLING-BLOCK HEAD | 15 | |
| ONDT-2213M | ALUMINIUM STEP BLOCK | 1 | |
| OTC7108 | TRANSMISSION TIMING BLOCK SET | 1 | |
| OU144865 | SETTLING BLOCK | 1 | |
| OU144866 | SETTLING BLOCK | 1 | |
| OU144933 | Settling Block | 1 | |
| OU144938 | Settling Block | 1 | |
| OU144947 | Settling Block | 1 | |
| OU144948 | Settling Block | 2 | |
| OU144954 | Settling Block | 1 | |
| OU144956 | Settling Block | 1 | |
| OU144958 | Settling Block | 1 | |
| OU144959 | Settling Block | 1 | |
| OU144960 | Settling Block | 1 | |
| OU144962 | Settling Block | 1 | |
| OU146649 | SETTLING BLOCK | 1 | |
| P54-07-1 | SPLIT CALIBRATION BLOCK | 1 | |
| PDL 457A | CALIBRATION BLOCK PDL 457A | 1 | |
| PDL 917 | CALIBRATION BLOCK | 2 | |
| PDL 944-2 | CALIBRATION BLOCK PDL 944-2 | 1 | |
| PJB05519 | SANDING BLOCK RUBBER 05519 | 1 | |
| PJB5519 | SANDING BLOCK | 1 | |
| PKA-15H-156.02.1 | Hand-Held Block Probe | 1 | |
| PLV3000/3 | HAND CHAIN BLOCK | 1 | |
| PM81458 | BOX COMPLETE WITH WOODEN BLOCKS AS PER DRAWING | 1 | |
| PNPGT68 | ANGLE BEAM CALIBRATION BLOCK | 1 | |
| PS0415-1 | RUBBER BLOCK (SINGLE) | 1 | |
| PS0415SET | PS0415 Including Blocks(4) | 1 | |
| PT-ABT | ALUMINUM SENSITIVITY TEST BLOCK | 1 | |
| PT3-1-2 | CLINCHING BLOCK | 1 | |
| PUL5815 | DOWN PULLY/SNAP BLOCK ASSEMBLY | 1 | |
| PWA 102848 | PWA 102848 BLOCK ASSEMBLY, CONCAVE | 1 | |
| PWA 10285 | BLOCK ASSEMBLY − CONCAVE (TYPE 2 BLADES) | 1 | |
| PWA 102853 | BLOCK ASSEMBLY − CONCAVE (TYPE 2 BLADES) | 1 | |
| PWA 102855 | BLOCK ASSEMBLY − CONCAVE (TYPE 1 BLADES) | 1 | |
| PWA 29317-19 | SETTING BLOCK | 1 | |
| PWA 29317-20 | SETTING BLOCK | 1 | |
| PWA 29317-21 | SETTING BLOCK | 1 | |
| PWA 29317-22 | SETTING BLOCK | 1 | |
| PWA 29317−19 | SETTING BLOCK | 1 | |
| PWA 29317−20 | SETTING BLOCK | 1 | |
| PWA 29317−21 | SETTING BLOCK | 1 | |
| PWA 29317−22 | SETTING BLOCK | 1 | |
| PWA-29317-19 | SETTING BLOCK | 1 | |
| PWA-29317-20 | SETTING BLOCK | 1 | |
| PWA-29317-21 | SETTING BLOCK | 1 | |
| PWA-29317-22 | SETTING BLOCK | 1 | |
| PWA-29317-23 | SETTING BLOCK | 1 | |
| PWA-29317-24 | SETTING BLOCK | 1 | |
| PWA101213 | BLOCK, SUPPORT - FAN BLADE CROSS SHROUD GAGE | 1 | |
| PWA101213 REV NC | BLOCK, SUPPORT - FAN BLADE CROSS SHROUD GAGE | 1 | |
| PWA102757 | WEDGE BLOCK-FAN BLADE, HPC | 5 | |
| PWA102848 | BLOCK ASSEMBLY, CONCAVE | 1 | |
| PWA106293 | BLOCK SETTING BLADE | 1 | |
| PWA106294 | BLOCK SETTING BLADE | 1 | |
| PWA106312 | BLOCK SETTING BLADE | 1 | |
| PWA106313 | BLOCK SETTING BLADE | 1 | |
| PWA26233 | CRIMPER - HPC, TIEROD NUT TABLOCK 15TH_[PWA26233] | 2 | |
| PWA27890 | ANVIL,BACKUP - LPC 1.5 STG BLADE TABLOCK_[PWA27890] | 2 | |
| PWA27891 | PUNCH,PREBEND - LPC 1.5 STG BLD TABLOCK_[PWA27891] | 2 | |
| PWA27892 | PUNCH,FINISH - LPC 1.5 STG BLADE TABLOCK_[PWA27892] | 2 | |
| PWA27894 | ANVIL,BACKUP - LPC 3RD STG BLADE TABLOCK_[PWA27894] | 2 | |
| PWA27919 | ANVIL,BACKUP - LPC 3RD STG BLD TABLOCK_[PWA27919] | 2 | |
| PWA28403 | PRATT & WHITTNEY 1ST STAGE FAN BLADE CALIBRATION STANDARD WITH HOLDING BLOCK . Includes Test Report and Certificate of Conformance. | 4 | |
| PWA29317-19 | LEADING EDGE SETTING BLOCK | 1 | |
| PWA29317-20 | TRAILING EDGE SETTING BLOCK | 1 | |
| PWA29317-21 | LEADING EDGE SETTING BLOCK | 1 | |
| PWA29317-22 | TRAILING EDGE SETTING BLOCK | 1 | |
| PWA29317-27 | BLOCK SETTING | 1 | |
| PWA29317-34 | BLOCK SETTING | 1 | |
| PWA29317-35 | BLOCK SETTING | 1 | |
| PWA29317-36 | BLOCK SETTING | 1 | |
| PWA29317-37 | BLOCK, SETTING | 1 | |
| PWA29317-38 | Setting Block | 1 | |
| PWA29317-63 | BLOCK SETTING | 1 | |
| PWA29317-64 | BLOCK SETTING | 1 | |
| PWA75039 | BLOCK, SHEAR - HPT 2ND BLADE ROOT COATING TRIM | 1 | |
| PWA75039 REV NC | BLOCK, SHEAR - HPT 2ND BLADE ROOT COATING TRIM | 1 | |
| PWA85603 | BLOCK SUPPORT ENG. | 1 | |
| PWA88016 | SPACER BLOCKS-TRANSLATING COWL LOCKOUT | 2 | |
| PWC30405-5 | FUEL NOZZEL TEST BLOCK | 1 | |
| PWC40429 | GAUGE BLOCK-IMPELLER CLEARANCE | 1 | |
| PWC48541 | CURING BLOCK | 2 | |
| PWC56030 | holding block | 1 | |
| PWC56031 | holding block | 1 | |
| PWC64799 | RESOLVER MOUNTING BLOCK | 1 | |
| PWC90026 | Test Block Safety Cab - Pratt & Whitney Canada | 6 | |
| PYLON-RIVET-BLOCK | PYLON RIVET BLOCK TOOL | 1 | |
| PYLONBLOCK | WOODEN PYLON BLOCK TOOL | 1 | |
| PYLONRIVET | PYLON RIVETING BLOCK TOOL | 1 | |
| Q21808 | Settling Block | 1 | |
| Q21808PM | SETTLING BLOCK | 1 | |
| Q21809 | Settling Block | 1 | |
| Q21809 PM | SETTLING BLOCK | 1 | |
| Q21811 | Settling Block | 1 | |
| Q21811PM | SETTLING BLOCK | 1 | |
| Q21812 | Settling Block | 1 | |
| Q21812 PM | SETTLING BLOCK | 1 | |
| Q21813 | Holding Block | 1 | |
| Q21813 PM | HOLDING BLOCK | 1 | |
| Q21816 | Settling Block | 1 | |
| Q21816 PM | SETTLING BLOCK | 1 | |
| Q21817 | Settling Block | 1 | |
| Q21827 | Settling Block | 1 | |
| Q21827 PM | SETTLING BLOCK | 1 | |
| Q21827PM | SETTLING BLOCK | 1 | |
| Q2500399 | REFERENCE BLOCK | 1 | |
| Q47749 | GUIDE FOR THE INSTALLATION OF THE DRIVE BLOCKS (2-060) | 9 | |
| QC6755 | CALIBRATION BLOCK 1 | 1 | |
| QC6772 | ULTRASONIC CALIBRATION BLOCK | 1 | |
| QC6852 | CALIBRATION BLOCK | 1 | |
| QC6854 | CALIBRATION BLOCK | 1 | |
| QZ10607 | TRANSFER BLOCK | 1 | |
| QZ10667 | TRANSFER BLOCK | 1 | |
| QZ12896 | TEST BLOCK DRAIN VALVE | 1 | |
| QZ12898 | TEST BLOCK NRV | 1 | |
| QZ12956 | TEST BLOCK NRV | 1 | |
| R78001-1 | PLATFORM - ACCESS, THRUST REVERSER, BLOCKER DOORS (GE90 ENGINES) | 2 | |
| R78001-23 | MAIN ACCESS BLOCK ASSEMBLY | 1 | |
| R78001-3 | PLATFORM - ACCESS, THRUST REVERSER, BLOCKER DOOR (RR ENGINE) | 3 | |
| R78001-58 | PLATFORM-ACCESS, T/R BLOCKER DOORS GE90 ENGINE | 4 | |
| RA30 | BLOCK;1-1/2 TON;LEVER CHAIN;;MFG:COFFING;P/N:RA30 | 1 | |
| RB T101464 | Engine Coupling & Pillow Block Shaft | 1 | |
| RB T101465 | Pillow Block Shaft Nut Wrench | 1 | |
| RB T101810 | Transmission To Pylon Alignment L/H Block | 1 | |
| RB T101811 | Transmission To Pylon Alignment R/H Block | 1 | |
| RB T103221 | Pillow Block Nut Wrench | 1 | |
| RBA9822-3 | Block Only | 4 | |
| RBA9822-3 & -5 | Tail Rotor S/P Holding Block (-3), Wr (-5) Set "C" Model | 2 | |
| RBD29822-3 | Tail Rotor Cross Head Holding Block | 2 | |
| RBD29822-3 & -5 | Tail Rotor Swash Plate Holding Block (-3), Wr (-5) Set 2 & 4 Bl "D,E&F" Model | 1 | |
| RBE332A94-2702-02 | Set Of Blocks A.P Including | 1 | |
| RBE350A93-3203-20 | Seal, Bush Installation Block (MGB) | 2 | |
| RBE350A93-3713-00 | Block Assembly, Adjustment | 2 | |
| RBE350A94-3440-07 | Sight Pattern, Bearing Block | 1 | |
| RBGTMD12 | Main Rotor Pillow Block Bolt Socket | 1 | |
| RBH9928 | Tab Bender With Plastic Block | 4 | |
| RBH9928-101-111 | Tab Bender Block | 1 | |
| RBH9928-12 | Tab Bender 12" Long With Plastic Block | 2 | |
| RBT18510-59 | Main Rotor Pillow Block Nut Wrench | 1 | |
| RBT18536 | Main Rotor Pillow Block Bolt Socket & Wrench | 1 | |
| RBT18561-21 | Extract Tool - Terminal Block | 1 | |
| RBT18561-23 | Extract Tool-Terminal Blocks | 1 | |
| RBT18596 | V Block For Checking Mast Runout | 1 | |
| RBW0705G00411-3G | Landing Gear Blocking System | 2 | |
| RBW0705G00453-3G | Forward Landing Gear Block | 1 | |
| RBW0705G00454-SX-3G | Aft L/H Landing Gear Block | 1 | |
| RBW0705G00455-DX-3G | Aft R/H Landing Gear Block | 1 | |
| RBW6205G03832-3G | Main Rotor Blade Blocking/Protecting Assembly | 2 | |
| RBW6205G14251-3G | Hinge Block | 1 | |
| RBW895-3101-04-117 | Main Rotor Blade Blocking And Protector Tool | 2 | |
| RC-5S1018 | ALUMINUM STEP CALIBRATION BLOCK | 1 | |
| RC2491 | MOUNTING BLOCK | 1 | |
| REFERENCE STANDARD,PHYSICAL PR | ULTRASONIC INSPECTION BLOCK | 1 | |
| RF69002-R815505 | WIRE LEAD BLOCK POSITIONING TOOL | 1 | |
| RRT062796 | TRUNNION BLOCK - FLOATING | 1 | |
| RRT062797 | TRUNNION BLOCK - FIXED | 1 | |
| RRT069629 | INSPECTION SPHERE MTG BLOCK | 1 | |
| RRT082834 | ALIN BLOCK | 1 | |
| RS-2571 | Notch Block 2024T3 AL 4 notches .005+/- .002 .25mm .5mm .75mm 1.0mm +/-10% | 1 | |
| RS0212-1 | CALIBRATION BLOCK | 1 | |
| RS0824-2024T3 | CALIBRATION BLOCK | 1 | |
| RS0824-4130 | REFERENCE BLOCK MADE OF 41304340 STEEL | 1 | |
| RS0824-4340 | REFERENCE BLOCK MADE OF 41304340 STEEL | 1 | |
| RSE1136 | BLOCKER DR PW TENSION | 4 | |
| RSMVS12-15 | CALIBRATION BLOCK SHAFT-ADJUSTABLE MINI ROTATING PROBE | 1 | |
| RSN-304SS | CUSTOM NAVY BLOCK. MATERIAL: 304 STAINLESS STEEL ,CONTAINING 20 FASTENER HOLES (.156-.750) WITH A TOTAL OF 71 EDM NOTCHES NOTCHES. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| RSV1-AL | V1 UT Reference Block in Aluminum with wooden case | 1 | |
| RSW-0512M-316 | Weldscan Test Block w/Shims, 316SS, with .5, 1 and 2 mm deep surface notches | 1 | |
| RT10-2024T3 | CALIBRATION BLOCK | 1 | |
| RT10-20MM-2024T3-.6/5MM | METRIC 10 STEP CALIBRATION BLOCK 2024-T3 AL | 1 | |
| RT10-6AL4V-1/16MM | 10 step wedge 15mmx15mm steps blocks 1,2,3,4,5,8,10,12,14,16mm steps Titanium | 1 | |
| RT10.15-6AL4V-2/20MM | 10 step wedge 15mmx15mm steps blocks 2,4,6,8,10,12,14,16,18,20mm steps +/- .02mm, Length and width +/- .5mm, Titanium | 1 | |
| RT10.20-6AL4V-2/20MM | 10 step wedge 20mmx20mm steps blocks 2,4,6,8,10,12,14,16,18,20mm steps Titanium | 1 | |
| RT10.40-2024T3-2/20MM | 10 step wedge 40mm wide x15mm long, steps blocks 2,4,6,8,10,12,14,16,18,20mm steps +/- .0254mm, 2024-T3 | 1 | |
| RT10.40-6AL4V-2/20MM | 10 step wedge 40mm wide x15mm long, steps blocks 2,4,6,8,10,12,14,16,18,20mm steps +/- .0254mm, 6AL-4V | 1 | |
| RT5-25MM-7075T6-10/30MM | 5 STEP BLOCK -2 UNIT - AL BLOCK CONSIST OF 5 DIFFERENT THICKNESS (30MM, 25MM, 20MM, 15MM, 10MM) AS BELOW. - MATERIAL AL 2024 | 1 | |
| RT5_75-1018-2_5/12_5MM | THICKNESS CALIBRATION BLOCKS | 1 | |
| RT5_75-7075T6-_25/1_25 | THICKNESS CALIBRATION BLOCKS | 1 | |
| RT8-2024-.028/.095 | UT THICKNESS CALIBRATION BLOCK | 1 | |
| RT8-2024T3-.028/.095 | UT THICKNESS CALIBRATION BLOCK | 1 | |
| RT8-2024T3-028095 | ULTRASONIC CALIBRATION BLOCK | 1 | |
| RT8-25MM-2024T3-1/8MM | 8 STEP BLOCK - 2 UNIT - AL BLOCK CONSIST OF 8 DIFFERENT THICKNESS (1MM, 2MM, 3MM, 4MM, 5MM, 6MM, 7MM, 8MM)AS BELOW. - MATERIAL AL2024 | 1 | |
| Red Box 4X Rivet Gun Set with Blocks | Red Box 4X Rivet Gun Set with Blocks | 1 | |
| Riveting Blocks | Riveting Blocks | 1 | |
| S-10 INCH | INCH,1018 steel,10step test block thickness :0.100"0.200"0.300"0.400"0.500"0.600"0.700"0.800"0.900"1.000" size:8"*0.8" | 1 | |
| S-10 MM-1 | MM,1018 steel,10step test block thickness:1mm/2mm/3mm/4mm/5mm/6mm/7mm/8mm/9mm/10mm size:200*20mm | 1 | |
| S-10 MM-2 | MM,1018 steel,10step test block thickness:2mm/4mm/6mm/8mm/10mm/12mm/14mm/16mm/18mm/20mm size:200*20mm | 1 | |
| S-10-SS | MM,SS304 stainless steel ,10step test block thickness:2mm/4mm/6mm/8mm/10mm/12mm/14mm/16mm/18mm/20mm size:200*20mm | 1 | |
| S-4 INCH-1 | INCH,1018 steel,4step test block thickness :0.100"0.200"0.400"0.600" size:3.15"*0.7" | 1 | |
| S-4 INCH-2 | INCH,1018 steel,4step test block thickness :0.250"0.500"0.750"1.000" size:3.15"*0.8" | 1 | |
| S-4 MM | MM,1018 steel,4step test block - thickness :3mm/5mm/10mm/15mm size:80*20mm | 1 | |
| S-5 INCH | INCH,1018 steel,5step test block thickness :0.100"0.200"0.300"0.400"0.500" size:4"*0.8" | 1 | |
| S-5 MM | MM,1018 steel,5step test block thickness :5mm/10mm/15mm/20mm/25mm size:100*20mm | 1 | |
| S-5 PIPE MM | MM,1018 steel,5step pipe test block thickness :2.5mm/5mm/10mm/15mm/20mm length:100mm | 1 | |
| S-6 MM-1 | MM,1018 steel,6step test block thickness :1mm/3mm/5mm/10mm/15mm/20mm size:120*20mm | 1 | |
| S-6 MM-2 | MM,1018 steel,4step test block thickness :2.5mm/5mm/10mm/15mm/20mm/25mm size:120*20mm | 1 | |
| S520 BLOCK | British Aerospace test block. Material: mild steel 4130, 4140 or 4340 cres .128: thick. Includes Test Report and Certificate of Conformance. | 1 | |
| SAM20146 | DRIVE BLOCK PRESSING-IN TOOL | 1 | |
| SB 57-3329 FIG.9 | Raytheon 12 Hole Standard Calibration Block Figure 9 Page 20, Service Bulletin SB 57-3329. Hole sizes 9/64, 11/64,3/16 and 13/64. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| SB09570184-9 | Douglas Standard, 1 notch block, 7075-T651 | 1 | |
| SB7P376A0002-00 | ACTUATOR - SPOILER 3 THRU 7 DISTRIBUTOR BLOCK - REMOVAL/INSTALLATION | 1 | |
| SCC14-21FE | REFERENCE BLOCK | 1 | |
| SCC3-7FE | REFERENCE BLOCK | 1 | |
| SCC7-14FE | REFERENCE BLOCK | 1 | |
| SCT-TB1 | Torque Verification Block for .022, .032, and .040 Safe-T-Cable | 5 | |
| SCT-TB1R | Torque Verification Block for .022, .032, and .040 Safe-T-Cable | 2 | |
| SCT-TB2 | Torque Verification Block for .062 Safe-T-Cable | 2 | |
| SET BLOCKING STAKING | SET BLOCKING STAKING | 1 | |
| SG 350A93-3203-20 | SEAL / BUSH INSTALLATION BLOCK | 1 | |
| SG 350A93-3713-00 | ASSEMBLY BLOCK, NON-ROTATING STAR / ROTATING STAR | 1 | |
| SGBST-B-23 | SENSOR BLOCK | 1 | |
| SGTT2B | TERMINAL TOOL TERMIAL BLOCK | 1 | |
| SH04-5-08K | BLOCK: CONNECTOR,300V,12A, 30-14AWG,PCB,SNGL MOLD | 2 | |
| SK 601R-30008A | REFERENCE BLOCK | 6 | |
| SK382-53-425-3 | PHENOLIC BLOCK | 1 | |
| SK601-10021 | CALIBRATION REFERENCE BLOCK SET (TAIL SECTION / HORIZONTAL STABILIZER) - SK601-10021 SERIES (BLOCKS 1 - 5) | 1 | |
| SK601-10025 | NDT BLOCK | 1 | |
| SK601R-10040-1 | NDT-TEST BLOCK | 4 | |
| SK601R-30039 | BLOCK - NDT | 2 | |
| SK601R−10043 | Calibration reference standard block (Bombardier Inc.) | 1 | |
| SM710 | BLOCK HPREGULATOR MOUNTING | 1 | |
| SP-265 | LOCKHEED C-130 STEP BLOCK. PROCEEDURE SMP 515-C. PAGE 9 MATERIAL: 7075-T6 ALUMINUM. | 1 | |
| SPL-10171 | ELEVATOR AFT QUADRANT RIGGING BLOCK EQUIPMENT | 1 | |
| SPL-5376 | Test Block Leading Edge Actuator | 1 | |
| SPLSPANNER | BLOCKER DOOR WRENCH | 1 | |
| SRM 51-70-00 | NDT TEST STANDART BLOCK | 1 | |
| SRS-0824S | REFERENCE BLOCK MADE OF 41304340 STEEL | 3 | |
| SRS-0824S-4340 | REFERENCE BLOCK | 1 | |
| SRS0824A | CALIBRATION BLOCK | 3 | |
| SSI 53-12-98 | NDT REF BLOCK | 1 | |
| SSI54-50-31 | NDT REF BLOCK | 1 | |
| SSINO54-10-03 | CALIB STANDARD BLOCK (TI) | 1 | |
| ST-212 | GAGE BLOCKS, CRANKSHAFT COUNTERWEIGHT BUSHING ADQUIRIR | 1 | |
| ST1000-A-8252 | SET OF FIVE LONG REACH RIVETING BLOCKS | 1 | |
| ST4340 | CALIBRATION REFERENCE STANDARD BLOCK - MADE FROM 4340 STEEL, MIL-S-5000, CONTAINS 0.008 IN. (0.20 MM), 0.020 IN. (0.51 MM), AND 0.040 IN (1.02 MM) DEEP ELECTRICAL DISCHARGE MACHINED NOTCHES, (MHIRJ OR COMMERCIALLY AVAILABLE). | 5 | |
| ST877W-DA | DIE BLOCK, WIGGINS POWER SWAGER | 1 | |
| ST8815B | Cooling Block | 1 | |
| ST887-4 | REFERENCE BLOCK | 1 | |
| ST8870-1 | CALIBRATION BLOCK | 4 | |
| ST8870-4 | CALIBRATION BLOCK | 4 | |
| ST8870-7 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE( 1-10 PLY), PT 1 51-04-00, PAGE 21 FIGURE 8. SUPPLIED WITH HOLDING BLOCK | 4 | |
| ST8870-8 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE( 11-20 PLY), PT 1 51-04-00, PAGE 21 FIGURE 8. SUPPLIED WITH HOLDING BLOCK | 5 | |
| ST8870-9 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE( 21-30 PLY), PT 1 51-04-00, PAGE 19 FIGURE 8. SUPPLIED WITH HOLDING BLOCK | 4 | |
| ST8870B-7 | CALIBRATION BLOCK | 3 | |
| ST8870B-8 | CALIBRATION BLOCK | 3 | |
| ST8870B-9 | CALIBRATION BLOCK | 3 | |
| ST8870C-7 | CALIBRATION BLOCK | 2 | |
| ST8870C-8 | CALIBRATION BLOCK | 2 | |
| ST8870C-9 | CALIBRATION BLOCK | 2 | |
| ST8870D | REFERENCE BLOCK (BOEING BONDED STANDARD) | 1 | |
| ST8871 | CALIBRATION BLOCK | 4 | |
| ST897C-C | BLOCK, HINGED, SWAGE TUBE FITTING | 1 | |
| ST93932 | BLOCK, HOLDING FIXTURE | 1 | |
| STANDARD-C | MIL-STD-2154A, STANDARD ULTRASONIC TEST BLOCK FOR AGNLE BEAM EXAMINATION, 7075-t6 | 1 | |
| STD-116 | BLOCK - WOOD, 1 TO 3 INCH THICK, MORE THAN 6 INCH LENGTH | 1 | |
| STD-12533 | SPACER BLOCK - (0.6 INCH X 0.6 INCH X 3 INCH) | 1 | |
| STD-1278 | BLOCK LOADING | 1 | |
| STD-1396 | PAD - 5X5X0.25INCH (127X127X7.4MM) WOOD BLOCK OR 6 INCH (152MM) DIAMETERX | 1 | |
| STD-14220 | RIGGING BLOCKS | 1 | |
| STD-14221 | RIGGING BLOCKS | 1 | |
| STD-14222 | RIGGING BLOCKS | 1 | |
| STD-1474 | CALIBRATION / REFERENCE BLOCK | 1 | |
| STD-NDT-1002 | REFERENCE BLOCK | 1 | |
| SWEEF1 | REFERENCE BLOCK | 1 | |
| SWERFI | REFERENCE BLOCK | 1 | |
| SWP102 | CAPSTAN ADAPTER, BLOCK | 1 | |
| SWREF1 | REFERENCE BLOCK | 2 | |
| SWREF2 | REFERENCE BLOCK | 1 | |
| SWREF3 | REFERENCE BLOCK | 1 | |
| T-300494 | Puller - Blocking Valve Puller | 1 | |
| T-304039 | LAPPING BLOCK | 1 | |
| T-403993 | Puller-Blocking Valve Seat | 1 | |
| T-416790 | Blocking Valve Sleeve Puller | 1 | |
| T-416790PM | PULLER- BLOCKING VALVE PISTON SLEEVE | 1 | |
| T-444391 | FORM BLOCK (EATON AEROSPACE) | 1 | |
| T-444395 | FORM BLOCK (EATON AEROSPACE) | 2 | |
| T-444397 | FORM BLOCK (EATON AEROSPACE) | 1 | |
| T-444399 | FORM BLOCK (EATON AEROSPACE) | 1 | |
| T-444401 | FORM BLOCK (EATON AEROSPACE) | 2 | |
| T-449857 | Puller,Blocking Valve Piston Subassembly | 1 | |
| T-474459 | TOOL, CHILL-BLOCK-AND- PROTECTOR | 1 | |
| T-474489-1-10 | TOOL, CHILL BLOCK AND PROTECTOR | 1 | |
| T-474530-1-10 | TOOL, CHILL-BLOCK-AND- PROTECTOR | 1 | |
| T-474566-1-10 | TOOL, CHILL-BLOCK-AND- PROTECTOR | 1 | |
| T-475069-1-10 | TOOL, CHILL-BLOCK-AND- PROTECTOR | 1 | |
| T-475070-1-10 | TOOL, CHILL-BLOCK-AND- PROTECTOR | 1 | |
| T-475976-1-10 | CHILL BLOCK AND PROTECTOR TOOL | 1 | |
| T-49569 | Forming Block | 1 | |
| T-70739 | Freeze Sleeve - Blocking and thermal relief valve | 1 | |
| T-71021 | Freeze Sleeve - Seat, blocking and thermal relief valve | 1 | |
| T-71022 | Sizing Tool - Housing, blocking and thermal relief valve | 1 | |
| T-71025 | Torque Adapter - Plug, blocking and thermal relief valve | 1 | |
| T-71027 | Removal Tool - Blocking and thermal relief valve | 1 | |
| T-71600 | Insertion/Removal Tool - Piston, blocking and thermal relief valve | 1 | |
| T-71670 | Assembly Bullet - Blocking and thermal relief valve | 1 | |
| T-HMC308 | BLOCK BENCH MECHANICS 3IN DIA | 1 | |
| T101740 | TR Rigging Block | 2 | |
| T20101460-AA-1 | PACKING INSTALLATION BLOCK | 1 | |
| T27- 025 | RIGGING BLOCK | 1 | |
| T27-026 | RIGGING BLOCK | 1 | |
| T28004380-AA-1 | INSTALLATION BLOCK | 1 | |
| T3017575 | BRUSH BLOCK ALIGN TOOL | 1 | |
| T415105 | CYLINDER BLOCK SPRING COMPRESSOR | 1 | |
| T418206 | VALVE BLOCK BEARING DRIVER | 1 | |
| T449857 | PULLER BLOCKING VALVE PISTON SUBASSEMBLY | 1 | |
| T458793 | BLOCK END PLAY FIXTURE | 1 | |
| TB 7150-1 | STANDARD BLOCK | 1 | |
| TB 7150-4 | TEST BLOCK,ULTRASON | 1 | |
| TB-201 | TORQUE VERIFICATION BLOCK | 1 | |
| TB101 | TEST BLOCK (OPTIONAL) | 1 | |
| TB1065-1 | CALIBRATION BLOCKS | 1 | |
| TB1065-4 | CALIBRATION BLOCK | 1 | |
| TB1PT35A | FLARING BLOCK | 1 | |
| TB201 | SAFE T CABLE VERIFICATION BLOCK | 1 | |
| TB5939-1 | IIW-2 CALIBRATION BLOCK 1018 STEEL | 1 | |
| TB5939-1 IIW-2 | CALIBRATION BLOCK 1018 STEEL | 1 | |
| TB5939-2 | CALIBRATION BLOCK | 1 | |
| TB5939-4 | IIW-2 CALIBRATION BLOCK 7075 ALUMINUM | 1 | |
| TB5939-4 IIW-2 | CALIBRATION BLOCK 7075 ALUMINUM | 1 | |
| TB7150-1 | BEAM CALIBRATION BLOCK | 1 | |
| TB7150-4 | V2 CALIBRATION BLOCK | 1 | |
| TB7150-4 (AL) | MINIATURE ANGLE BEAM (ROMPAS) BLOCK | 1 | |
| TBTS-1 | TERMINAL BLOCK R/I TOOL | 1 | |
| TCH-B1-.375-45/30 | Holding Block | 1 | |
| TCH-B2-.375-45/30 | Holding Block | 1 | |
| TITREPAIR | COMPRESSOR CASE FORMING BLOCK | 1 | |
| TL4989 | Gauge Block Brush Gear Slip Ring | 1 | |
| TL5684 | PIN PROP BRUSH BLOCK CHECKING | 2 | |
| TM2297G001 | PACKING HP PUMP BLOCK FOR ENGINE STORAGE | 2 | |
| TM30520 | Trunnion block floating | 1 | |
| TM30525 | Trunnion block fixed | 1 | |
| TM405555FG | 4.0MM STEREO MEASUREMENT FORWARD VIEWING INTERCHANGEABLE OPTICAL TIP COLOR: BLACK FOV: 55/55 DEGREES DOF: 5MM TO INF. (0.2" TO INF.) DOV: 0 DEGREES INCLUDES VERIFICATION BLOCK (VER2400C) REQUIRES CALIBRATION REQUIRES STEREO MEASUREMENT SOFTWARE, SOLD SEPA | 2 | |
| TP11 | CALIBRATION BLOCK | 1 | |
| TP54 | Split Calibration block-AL, A318/A319/A320/A321 51-10-01-PB6 PG 10 FG 51-10-01-991-005-A SHEET 01, A300-600 PT6 51-63-08 PG 601 FG 601, | 2 | |
| TP54-02-1 | SPLIT PARALLEL CALIBRATION BLOCK | 2 | |
| TP54-07-1 | Split Calibration block- Ti | 2 | |
| TP54-10-1 | SPLIT CALIBRATION BLOCK-AL, 15MM-28MM HOLES, A318/A319/A320/A321 NTM 51-63-07, 7075-T6 | 1 | |
| TP601 | RIVETING BLOCK TOOL | 1 | |
| TP633 | RIVETING BLOCK TOOL | 1 | |
| TP646 | RIVETING BLOCK TOOL | 1 | |
| TP649 | RIVETING BLOCK TOOL | 1 | |
| TP669 | RIVETING BLOCK TOOL | 2 | |
| TP683 | RIVETING BLOCK TOOL | 1 | |
| TP751V-1 | RIVETING BLOCK TOOL | 1 | |
| TP753 | RIVETING BLOCK TOOL | 1 | |
| TP760B-1 | RIVETING BLOCK TOOL | 1 | |
| TP760B-10 | RIVETING BLOCK TOOL | 1 | |
| TP760C-1 | RIVETING BLOCK TOOL | 1 | |
| TQ002001 | REFERENCE BLOCK | 2 | |
| TQ00201 | CALIBRATION BLOCK | 1 | |
| TSF21T-51001-5 | BLOCKING PLATES AND FITTING | 1 | |
| TSF5T-52001-26 | BLOCK OFF PLATE (WAS NOTED AS A -16, SCARS ASSOCIATES NOMENCLATURE WITH -26) | 1 | |
| TURNEXSSB2 | TURNEX 1/4" DRIVE SLIDE BLOCK | 1 | |
| TYSCCS21-28 | CALIBRATION BLOCK FOR ALUMINUM | 1 | |
| Ti-6AL-4V BLOCK | Titanium Block 110mm(3.937") x 18mm(7.09") x 15mm(.591") Block. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. | 1 | |
| U21862 | FILLING BLOCK | 1 | |
| U8860182 | Calibration block 99A51107300000 (NDT) | 1 | |
| U8860212 | Calibration block 99A53307274000 (NDT) | 1 | |
| U8861883 | Reference block 99A51107299001 (NDT) | 1 | |
| U8880016 | BLOCK STEELCARBON | 1 | |
| U8880096 | ASTM E164 IIW TYPE BLOCK IN 1018 STEEL (WITHOUT F1 | 1 | |
| U8880111 | CONDUCTIVITY STANDARD BLOCK | 1 | |
| U8880223 | TB1065-4 Mini Angle Block distance | 1 | |
| UA7119000000000 | CONNECTION BLOCK | 1 | |
| ULTRASONIC CALIBRATION BLOCK (2 STEP 2-3 MM | ULTRASONIC CALIBRATION BLOCK (2 STEP 2-3 MM | 1 | |
| UT-PHT-CALBLK1.WC | WOOD CASE FOR CALIBRATION BLOCK NO. 1 (K1) | 1 | |
| UT-RC-551018-MA | 5 STEP CALIBRATION BLOCK (UT) METRIC 5A(2.5, 5.0, 7.5, 10.0 & 12.5MM) MATERIAL: 1018 CARBON STEEL | 1 | |
| UT-RC-5S-CAL | 5-STEP CALIBRATION BLOCK, DIMENSIONAL CALIBRATION AND SERIALIZATION | 1 | |
| UT-RC-5S-CASE | 5 -STEP CALIBRATION BLOCK, WOOD CASE FOR STANDARD INCH VERSION, CUSTOM INCH VERSION C2 AND METRIC A | 1 | |
| UT-RC-5S1018-MA | TEST BLOCK. 5-STEP. 1018 CARBON STEEL. METRIC UNIT 2.5 MM, 5.0 MM, 7.5 MM, 10.0 MM, 12.5 MM PRECISIO | 1 | |
| UT-RC-5S7075-C1 | 5-STEP CALIBRATION BLOCK, 7075 ALUMINUM | 1 | |
| UT-RC-5STITANIUM | 5-STEP CALIBRATION BLOCK, TITANIUM | 1 | |
| UT1031-1 | BLOCKER CONTROL, DEACTIVATE T/REV, RB211 | 1 | |
| UT1271/1 | BLOCKER THRUST REVERSER DEPLOYMENT | 2 | |
| UT1271/1 | SPL-5574 BLOCKER - THRUST REVERSER DEPLOYMENT | 2 | |
| UT2009 | CALIBRATION TEST BLOCK | 1 | |
| V-2 | BLOCK 2, CALIBRATION | 2 | |
| V1 | BLOCK 1, CALIBRATION | 3 | |
| V1 ALUMINUM STANDARD | CALIBRATION BLOCK, OLYMPUS PN MHS‐29‐1A‐0, ALUMINUM ALLOY WITH EDM HOLES (FROM: 1/8 IN TO 1 IN) | 1 | |
| V1-EN-12223 | CALIBRATION BLOCK | 1 | |
| V1-IIW | ANGLE BEAM CALIBRATION BLOCK | 1 | |
| V1-IIW-CS | V-1 (A-2) IIW Angle Beam Calibration Block (Metric). Made to British Standard: BS-2704, German Standard: DIN 54-120, Australian Standard AS 2803 and ISO 2400. Material: A36/1018 Carbon Steel. Thickness of 1" / 25 mm, Height of 4" / 100 mm for straight bea | 1 | |
| V15A2.CS | STANDARD BLOCK ;SPECIFICATION: V1 ;CRACK SIZE: 1 MM | 1 | |
| V2 | BLOCK 2, CALIBRATION | 2 | |
| V2(K2) | CALIBRATION BLOCK | 1 | |
| V2-AL | MINI ANGLE BEAM ALUM V2 BLOCK ½" (12.5mm) or 1" (25.4 mm) thick, 1" radius opposite 2" radius, with 5/64" diameter side drilled hole (3/4" deep flat bottom hole in 1" thick version). Aluminum 7075-T6. Includes form fitted case. | 1 | |
| V2-CS | MINI ANGLE BEAM BLOCK CS V2 BLOCK.½" (12.5mm) or 1" (25.4 mm) thick, 1" radius opposite 2" radius, with 5/64" diameter side drilled hole (3/4" deep flat bottom hole in 1" thick version).1018 Carbon Steel with form fitted case | 1 | |
| V2-K2 | CALIBRATION BLOCK | 1 | |
| V2-SS | MINI ANGLE BEAM BLOCK CS V2 BLOCK.½" (12.5mm) or 1" (25.4 mm) thick, 1" radius opposite 2" radius, with 5/64" diameter side drilled hole (3/4" deep flat bottom hole in 1" thick version). ..304 Stainless Steel with case | 1 | |
| V2A4-WC | WOODEN CASE FOR PN: V2A4.12.5.CS BLOCK | 1 | |
| V2A4.12.5.CS | BLOCK 2, CALIBRATION | 1 | |
| V2A4.WC | WOODEN CASE FOR PN: V2A4.12.5.CS BLOCK | 1 | |
| V50 | SWITCH PB CONTACT BLOCK | 1 | |
| VER2400UV-9196 | UV VERIFICATION BLOCK | 1 | |
| VER2600 | VERIFICATION BLOCK | 1 | |
| VER2600C | Verification Block (NDT) | 1 | |
| VER2600D | VERIFICATION BLOCK FOR 6 MM | 1 | |
| VJ 0.5 TON | CHAIN BLOCK 0.5 TON LIFTING 3 MTR KAWASAKI | 1 | |
| VM30889-C1A/NRK-3AL | CUSTOM NAVY BLOCK | 1 | |
| VSIIII500.6M | CHAIN BLOCK 500 KG | 1 | |
| VTE14 | CONNECTING BLOCK BASE | 1 | |
| VW8STEP.6AL4V | VW 8-STEP BLOCK W/ HARDWOOD CASE (NDT) | 1 | |
| VW8STEP.A | VW STEP BLOCK W/ HARDWOOD CASE (NDT) | 1 | |
| VW8STEP.SS | VW STEP BLOCK W/ HARDWOOD CASE (NDT) | 1 | |
| W-1893 | MEASURING BLOCK | 1 | |
| WB-UN-1503 | TERMINAL BLOCK | 1 | |
| WB808-1146 | Spanner Tq- Elect terml Blocks 9LB-INS | 5 | |
| WB808-1146B | Spanner Tq- Elect terml Blocks 9LB-INS | 4 | |
| WB808-1346 | Spanner Tq-Elect terml Blocks | 4 | |
| WB808-4UNC | Spanner Tq-Elect terml Blocks 3.5 LB-IN | 6 | |
| WORKAID NO. 6 | MAIN ROTOR HUB SUPPORT BLOCK(S) | 1 | |
| WP-632 | FUNCTION TEST BLOCK | 3 | |
| WSM-A320 | A320 MAIN WHEEL TEST BLOCK - NDT SOLUTIONS | 1 | |
| WSM-B737 | B737 MAIN WHEEL TEST BLOCK - NDT SOLUTIONS | 1 | |
| WSN-A320 | A320 NOSE WHEEL TEST BLOCK - NDT SOLUTIONS | 1 | |
| WSN-B737 | B737 NOSE WHEEL TEST BLOCK - NDT SOLUTIONS | 1 | |
| WT-001978-7 | CHILL BLOCK AND PROTECTOR TOOL | 1 | |
| WT-00198-1 | TOOL, CHILL-BLOCK- AND-PROTECTOR | 1 | |
| WT-00198-10 | TOOL, CHILL BLOCK AND PROTECTOR | 1 | |
| WT-00198-12 | TOOL, CHILL-BLOCK-AND-PROTECTOR TOOL | 1 | |
| WT-00198-16 | TOOL, CHILL BLOCK AND PROTECTOR | 1 | |
| WT-00198-4 | TOOL, CHILL BLOCK AND PROTECTOR | 1 | |
| WT-00198-7 | CHILL BLOCK-AND- PROTECTOR-TOOL | 1 | |
| WT-00265 | FILL ADAPTOR LOCKING BLOCK | 1 | |
| WT00198 | CHILL BLOCK AND PROTECTOR TOOL | 1 | |
| WT00198-11 | CHILL BLOCK AND PROTECTOR TOOL | 1 | |
| WT00198-12 | CHILL BLOCK AND PROTECTOR TOOL | 1 | |
| WT00198-16 | CHILL BLOCK AND PROTECTOR TOOL | 1 | |
| WT00198-6 | CHILL BLOCK AND PROTECTOR TOOL | 1 | |
| XW80520 | TRUNNION BLOCK FLOATING | 1 | |
| XW80525 | TRUNNION BLOCK FIXED | 1 | |
| YALE C85 | 6 TON LIFITING BLOCKS | 1 | |
| YALE5T0N2-5M | BLOCK AND TACKLE 5 TON 2.5M DROP | 1 | |
| YHLZ16-2 | CONNECTION BLOCK | 2 | |
| YII-25 | CHAIN BLOCK_[YII-25] | 1 | |
| Z-2472-00 | BLOCK: CONTROL, | 1 | |
| ZFEWB | Water Block Fuel Filter Element 10 Mic | 1 | |
| ZGFU | Grease Fitting Unblocker | 1 | |
| 80T2341 | SPECIAL BEARING UPPER BLOCKER DOOR | 1 | |
| 98A54003069000 | REFERENCE BLOCK,DIMENSIONS:160X15MM | 2 | |
| 99A57204390003 | REFERENCE BLOCK,DIMENSIONS:120X95X12MM, | 1 | |
| C12051T-80-1610 | DRILL/REAMER GUIDE BLOCK,BUSHING ID=.161 | 1 | |
| C12051T-80-2344 | DRILL/REAMER GUIDE BLOCK,BUSHING ID=.234 | 1 | |
| RSE1136 | TENSION TOOL,USED TO PRELOAD THE BLOCKER | 4 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
