| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| K-2027 | Kit, Re | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 856A1717P01 | TOOL KIT, PRESERVATION (CALIBRATION) | 1 | |
| (CALIB) 956A1602P01 | KIT, PRESERVATION - LUBE AND FUEL SYSTEM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D47209001000 | VACUUM & PRESSURE TEST KIT, IGGS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57004025000 | KIT KIT, REM.-INST. - PINTLE BUSHES (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57004025001 | KIT KIT, REM.-INST. - PINTLE BUSHE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9213001-0001 | KIT, PRESSURIZATION BLANKING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DLTFRPSKT3028A | REPAIR KIT, FIELD - SIZE 04 TO (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G600-210004-227 | KIT, PNEUMATIC PRESSURE TEST 220V/50HZ (CALIBRATION) | 1 | |
| (CALIB) G601-210007-201 | KIT, PNEUMATIC PRESSURE TEST 220-240V/50 (CALIBRATION) | 1 | |
| (CALIB) MK7ATIS-002EL-EPRV | KIT, INFLATION TIRE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MK7ATIS-003 | KIT, INFLATION TIRE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SIC3500-001 | KIT, INFLATION TIRE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SR5722-09T00000 | TOOLKIT TOOL KIT, FWD PINTLE BREAKING (CALIBRATION) (CALIBRATION) | 1 | |
| 002A0006-69 | TOP KIT, RETROFIT TAIL STROBE LIGHT SYSTEM PROTECTION | 1 | |
| 005W0025-1 | TOP KIT, RETROFIT BMS 8-39 FOAM IN FLIGHT DECK OVERHEAD REPLACEMENT | 1 | |
| 005W3620-6 | TOP KIT, RETROFIT | 1 | |
| 01-1404-00 | KIT, DATABUS, ANALYZER 429 (REPLACES 100-200-002) | 5 | |
| 01-1404-01 | KIT, DATABUS, ANALYZER 429 (REPLACES 100-200-002) | 3 | |
| 015U1870-5 | KIT, REPLACEMENT | 1 | |
| 02-7846C0110 | MASTER KIT, RAIN-RE- PELLENT | 2 | |
| 06-8122-6000 | Kit, Pressure Relief Test | 4 | |
| 072-100-043 | ETHER NDE KIT, AEROCHECK+, EDDY CURRENT PORTABLE FLAW DETECTOR | 1 | |
| 1065 | KIT, SAFETY, TIRE INFLATION | 4 | |
| 1009772 | KIT,LOW TEMPERATURE VALVE | 1 | |
| 1024714 | REPAIR KIT, ELECTRICAL CABLE INSULATION | 1 | |
| 1046850-100 | RECOVERY KIT, HELICOPTER | 1 | |
| 1078972-601 | KIT, BEARING REMOVAL | 1 | |
| 109-3101-93-123 | TOOLS KIT,INSTL/REMOVAL BUSHING,UPPER LINK ROTATIN | 1 | |
| 109-3130-78-101 | TOOL KIT, 90° GEARBOX DRIVE SEAL REMOVAL/INSTALLATION | 1 | |
| 109-3130-83-101 | TOOL KIT,T/R RETENTION NUTS REMOVAL/INSTALLATION (NSCM A0126) | 1 | |
| 109-3130-85-101 | TOOL KIT,T/R PITCH CHANGE SHAFT DOUBLE BEARING REMOVAL/INSTL (NSCM A0126) | 1 | |
| 109-3130-85-133 | TOOL KIT, TAIL ROTOR PITCH CONTROL SHAFT BEARING REMOVE/INSTALL | 1 | |
| 109-3130-87-143 | TOOL KIT, TR HUB BUSHING REM/INST | 1 | |
| 109-3401-69-137 | AW119 TOOL KIT, MAIN TRANSMISSION DRIVE INPUT SEAL REPLACEMENT | 1 | |
| 109-3900-81-107 | TOOL KIT, ENGINE TO TRANSMISSION DRIVE SHAFT REMOVAL/ INSTALLATION | 1 | |
| 1091451-100 | SEALS KIT, REAR CYLINDER NBL. FOR BELT LOADER | 1 | |
| 10C1038 | KIT, BORESCOPE GUIDE | 1 | |
| 10C1038G01 | KIT, BORESCOPE GUIDE | 1 | |
| 10C2409 | CARBON SEAL REMOVAL KIT, AXIS D,F,J,E,G | 1 | |
| 115-00632 | Barfield 115-00632 Air Data Test Set Hose Kit, 25 ft L, Blue/Red, For Aircraft | 4 | |
| 1159GSE50114-3 | REPLENISHING KIT, OIL ENG/IDG | 3 | |
| 11C4552 | KIT, PRESERVATION - LUBE & FUEL SYSTEM (ON/OFF WING) | 1 | |
| 11C4552P01 | KIT, PRESERVATION - LUBE | 2 | |
| 11C4552P02 | KIT, PRESERVATION - LUBE | 1 | |
| 11C4552P03 | KIT, PRESERVATION - LUBE | 2 | |
| 11C4552P04 | GENX 2B KIT, ENGINE PRESERVATION | 2 | |
| 11C4552P05 | KIT, PRESERVATION - LUBE | 2 | |
| 11C4552P07 | KIT, PRESERVATION - LUBE & FUEL SYSTEM (ON WING ONLY) | 1 | |
| 11C4848 | MOTOR KIT, PRESERVATION | 1 | |
| 11C4848G01 | MOTOR KIT, PRESERVATION | 1 | |
| 11C4855 | GENX-2B KIT, UPGRADE PRESERVATION | 1 | |
| 12-503-23 | KIT, CPI READOUT | 1 | |
| 12-91591 | TOOL KIT,CARBURETOR;| | 1 | |
| 1201570 | SOFTWARE KIT, REPROGRAMMING ELT, OPTION | 9 | |
| 124B | OSCILLOSCOPE – PORTABLE - STANDARD KIT, NO SOFTWARE | 1 | |
| 14-6804 | KIT, REGULATOR, HIGH PRESSURE NITROGEN | 3 | |
| 14-6804-6000 | KIT, REGULATOR, HIGH PRESSURE NITROGEN | 22 | |
| 14-6806-6011 | KIT, GAUGE TIRE PRESSURE (0-300 PSI (0-2 068.44 KPA)) | 23 | |
| 14-6807-6011 | KIT, GAUGE TIRE PRESSURE, GSE | 19 | |
| 14-6830-6012 | KIT, TIRE SERVICE | 11 | |
| 140040 | REPAIR KIT, AIRCRAFT | 1 | |
| 144050-RFX | CH47 WIRELESS AIRCRAFT SCALE KIT, MODEL AC15-LP | 1 | |
| 145G0333-117 | REPAIR KIT, AIRCRAFT | 1 | |
| 16A11676-1 | REPAIR KIT, EXTERNAL | 1 | |
| 16A11691-1 | KIT, REMOVAL - BEARING, WING FLAPERON | 1 | |
| 16A11696-1 | TOOL KIT, REMOVAL - INSERTS, WING PYLON | 1 | |
| 16A46049-1 | WRENCH KIT, ATTACH FITTING - FORWARD | 2 | |
| 18900G-42 | KIT,CONNECTOR W/ STRAIN RELIEF | 9 | |
| 18C1602 | KIT, ENGINE PRESERVATION | 1 | |
| 18C1602P01 | KIT, ENGINE PRESERVATION GE PASSPORT | 1 | |
| 19BZ44 | BRISKHEAT® TABLE TOP COMPOSITE CURING TEMPERATURE CONTROLLER W/VACUUM KIT, UNIVERSAL VOLTAGE - 19BZ44 | 1 | |
| 1A2487-2 | TOOL KIT, PILOT VALVE REGULATOR | 1 | |
| 201211HP | CASE-TOOL KIT,SET FOR REPLENESHING OF HYDRAULIC PETROLEUM FLUID | 4 | |
| 2019 | KIT, ELT REMOTE SWITCH | 5 | |
| 2001153 | Rx towbar for Lockheed Martin C-130 Series aircraft family. Heavy duty steel towbar features linear & radial shear protection, hydraulic lift kit, road speed rated wheels-hubs and bearing. 15 foot long towbar ships fully assembled except for tube haves | 1 | |
| 2022-72 | TEST KIT,AERIAL REFUELING BOOM NOZZLE | 1 | |
| 215448-0 | KIT,REPAIR FOR FLOAT | 1 | |
| 21C7321G01 | KIT, COMPRESSOR ROTOR BALANCE (SCHENCK) | 1 | |
| 222024 | KIT, FIELD REPAIR, FUEL TANK | 1 | |
| 2558456 | DRIVER KIT, BEARING CUP REMOVAL | 1 | |
| 2558460 | DRIVER KIT, BEARING CUP REMOVAL | 1 | |
| 2558816 | DRIVER ASSEMBLY KIT, OB BEARING CUP REMOVAL | 1 | |
| 2558817 | DRIVER ASSEMBLY KIT, IB BEARING CUP REMOVAL | 1 | |
| 2558857 | KIT, REMOVAL SUPPORT | 1 | |
| 23053655 | KIT,LIP SEAL REPLACEMENT TOOLS | 1 | |
| 2002153123 | KIT,CARD READER GPS | 1 | |
| 24N789 | KIT, REPAIR, SEAL, AIR, ES GUN | 1 | |
| 24N790 | KIT, REPAIR, SEAL, FLUID, ES GUN | 1 | |
| 2539S | KIT, ACTUATOR REPAIR | 1 | |
| 25N831 | KIT, NOZZLE , PRECISION HW 1.0MM | 1 | |
| 25N832 | KIT, NOZZLE , PRECISION HW 1.2MM | 1 | |
| 25N833 | KIT, NOZZLE , PRECISION HW 1.5MM | 1 | |
| 25N834 | KIT, NOZZLE , PRECISION HW 1.8MM | 1 | |
| 267-0P18 | KIT, QUICK RELEASE ATTACHMENT | 1 | |
| 2915831 | WRENCH-TORQUE KIT,APU | 1 | |
| 291980-1 | BALANCE KIT, COMPRESSOR ROTOR | 1 | |
| 296050020-1 | SKYKIT,ADAPTER KIT,CIRCUIT BREAKER | 1 | |
| 296050020-1R | KIT, RED CASE | 1 | |
| 296050020-1R | Kit, Red Case | 1 | |
| 296050020-2R | Kit, Red Case | 1 | |
| 298493 | Adapter, Kit, Installation/Removal Seal and Spline Adapter | 1 | |
| 2C1386G01 | KIT, PRESERVATION-LUBE AND FUEL SYSTEM GE90-94B/115B | 1 | |
| 2C14238G02 | TOOL KIT, REMOVAL TH | 2 | |
| 2C1461G01 | KIT, PRESERVATION-FUEL SYSTEM GE90-94B/115B | 1 | |
| 2C14974G02 | KIT, GE90/CF6-80 PRESERVATION - HMU | 2 | |
| 2C5088 | KIT, WRENCH 03375,12 | 1 | |
| 2C5088G01 | KIT, PNEUMATIC WRENCH | 1 | |
| 2C5247G01 | KIT, COMPRESSOR ROTOR SET SCREW ASSEMBLY | 1 | |
| 2C6353 | KIT, REMOVAL ACOUSTIC | 1 | |
| 2C6488 | KIT, READ OUT | 1 | |
| 2C6525 | KIT, REFACING-INTERNAL FITTINGS, 37 DEGREE ANGLE | 1 | |
| 2C6525 REV C | KIT, REFACING-INTERNAL FITTINGS, 37 DEGREE ANGLE | 1 | |
| 2C6525G01 | KIT, REFACING - INTERNAL | 1 | |
| 2C6527 | KIT, REFACING-SPHERICAL FITTINGS EXTERNAL | 1 | |
| 2C6527 REV G | KIT, REFACING-SPHERICAL FITTINGS EXTERNAL | 1 | |
| 2C6527G01 | KIT, REFACING - SPHERICAL | 1 | |
| 2C6527G03 | KIT, REFACING - SPHERICAL | 1 | |
| 2C81703P08 | KIT, PRESERVATION | 1 | |
| 2C91039G02 | KIT, STATOR VANE REMOVAL | 1 | |
| 2C91196G01 | KIT, RESTRAINING-VV | 1 | |
| 2LM0501-1 | GAGE KIT, CABIN PRESSURE | 1 | |
| 2OHME65B91889 | SLING - SPARE ENGINE CARRIAGE KIT, INLET NOSE DONUT, JT9D-3, -3A, -7, AND -7Q | 1 | |
| 301BEL951PEV | SHELF KIT, REPLACEMENT | 1 | |
| 301BEL951PWZ | SHELF KIT, REPLACEMENT | 1 | |
| 30R0122G01 | INSPECTION KIT, EDDY CURRENT, HPC BLADES 1-3, F414 | 1 | |
| 320398 | DEFLECTING BEAM TORQUE WRENCH SIGNAL TRIP KIT, 10 TO 200 LBF⋅IN | 1 | |
| 3401346-1 | KIT, ADAPTER, AFT CARGO DOOR REMOVAL | 1 | |
| 3402647-1 | LUBRICATION KIT, HAND HELD GREASE GUN | 1 | |
| 3402760-1 | WRENCH KIT, WIG-O-FLEX COUPLING | 1 | |
| 3403149-1 | INSPECTION TOOL KIT, JACKSCREW BALL NUT | 2 | |
| 3404026-1 | SPINNER REMOVAL/INSTALLATION TOOL KIT, CONSISTING OF: SPINNER REMOVAL TOOL, AND FASTENER RELEASE TOOL. | 1 | |
| 3404075-1 | WRENCH KIT, PROPELLER TORQUE | 1 | |
| 35-92180-0001 | COMPRESSOR KIT, ICE PROTECTION AND AIR CONDITIONING SYSTEM - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 3831TD13821 | Assy Kit, Vacuum Pressure Test, LAV Waste System | 1 | |
| 3G1805G0143 1 | TOOL KIT, MAST VIBRATION ABSORBER REM/IN | 1 | |
| 3G1805G01431 | AW139 TOOL KIT, MAST VIBRATION ABSORBER REMOVE/INS | 1 | |
| 3G5305G11231 | TOOL KIT, NLG BEARING REM/INSTL | 1 | |
| 3G6005G00231 | PULLER KIT, M/R AND T/R UPPER RING REM | 1 | |
| 3G6205G00331 | TOOL KIT, M/R BLADE RETENTION BOLT REM/INSTL | 1 | |
| 3G6205G05951 | TOOL KIT, M/R DAMPER ROD-END REM/INST | 1 | |
| 3G6205G06232 | TOOL KIT, M/R FLANGED BUSHING REM / INSTL | 1 | |
| 3G6205G19232 | TOOL KIT, M/R SCISSOR BUSHING REPL | 1 | |
| 3G6205G21631 | TOOL KIT, M/R DAMPER ATTACHMENT BOLT REM | 1 | |
| 3G6205G2163L | TOOL KIT, M/R DAMPER ATTACHMENT BOLT REM | 1 | |
| 3G6305G00131 | TOOL KIT, GIMBAL/TORQUE TUBE BUSHINGS REPL. | 1 | |
| 3G6305G00132 | TOOL KIT, GIMBAL/TORQUE TUBE BUSH. REPL | 1 | |
| 3G6305G01331 | TOOL KIT, MGB FREEWHEEL REPLACEMENT | 1 | |
| 3G6305G01531 | TOOL KIT, M/R DRIVE SEAL REPLACEMENT | 1 | |
| 3G6305G02831 | TOOL KIT, MAIN GEAR BOX UPPER FITTING REPLACEMENT | 1 | |
| 3G6305G03531 | TOOL KIT, INPUT FLANGE/GIMBAL REM/INST | 1 | |
| 3G6305G05833 | TOOL KIT, TAIL ROTOR DRIVE QUILL RING NUT REMOVE INSTALL | 1 | |
| 3G6305G06232 | TOOL KIT, M/R FLANGED BUSHING REM/INST | 1 | |
| 3G6305G19731 | TOOL KIT, M/R DRIVE SEAL REPLACEMENT (GF-18-00) | 1 | |
| 3G6305G24131 | TOOL KIT, INPUT PINION MATING RING REPL | 1 | |
| 3G6305G26731 | TOOL KIT, MGB PRESERVATION | 1 | |
| 3G6305G29431 | TOOL KIT, GIMBAL/TORQUE TUBE BUSHINGS REPLACEMENT | 1 | |
| 3G6305G32231 | TOOL KIT, MGB AGB LIP SEALS REPLACEMENT (GJ-69-00) | 1 | |
| 3G6320G00131 | TOOL KIT, MGB LIP SEAL REPL | 1 | |
| 3G6400G00131 | TOOL KIT, T/R SLIDER BUSHING REM/INSTL | 1 | |
| 3G6400G00531 | TOOL KIT, T/R SLIDER BUSHING -251 REM/INSTL | 1 | |
| 3G6405G04032 | TOOL KIT, T/R DUPLEX BEARING REM/INST | 1 | |
| 3G6405G08632 | TOOL KIT, T/R BUSHING REPL | 1 | |
| 3G6520G02631 | TOOL KIT, M/R DRIVE SEAL REPLACEMENT | 1 | |
| 3G6705G00231 | TOOL KIT, MGB FREEWHEEL REPLACEMENT | 1 | |
| 3S60006-101 | KIT, SHIELDED WIRE FERRULE | 1 | |
| 3S60009-101 | KIT, SHIELDED WIRE SPLICE | 1 | |
| 3SF6149-501 | KIT, STATIC PRESSURE, DIGITAL MEASUREMENT | 1 | |
| 3T6505G00131 | TOOL KIT, IGB SEAL REPL | 1 | |
| 3T6505G00231 | TOOL KIT, TGB SEAL REPLACEMENT | 1 | |
| 3T6505G00331 | TOOL KIT, COMMON SEAL REPLACEMENT | 1 | |
| 3T6505G00431 | TOOL KIT, T.R.D. SUPPORT BEARING REPAIR | 1 | |
| 3T6505G00531 | TOOL KIT, TGB SEAL REPLACEMENT | 1 | |
| 3T6505T00431 | TOOL KIT, TRD SUPPORT BEARING REPAIR | 1 | |
| 3T6521A00146W142C | TOOL KIT, T/R BUSHING REPLACEMENT | 1 | |
| 400A1 | KIT, FUEL LEAK REPAIR | 1 | |
| 41090G-32 | KIT,CONNECTOR W/ STRAIN RELIEF | 3 | |
| 41090G32 | KIT,CONNECTOR W/ STRAIN RELIEF | 3 | |
| 412-201-701-101 | TOOL KIT, RIGGING, WIRE ROPE | 1 | |
| 439009074 | TEST KIT, PRESS VLV | 2 | |
| 44004-04A-E17 | KIT, HYDRAULIC RESERVOIR COUPLING | 6 | |
| 44004-04A-E17 | KIT, HYDRAULIC RESERVOIR COUPLI | 6 | |
| 45295 | NON-FLUORESCENT MATERIAL KIT, | 1 | |
| 473155 | TEST KIT, FIRE DETECTION | 2 | |
| 495676 | KIT,REMOTE PROGRAMMING(ECU),MODEM TOOL | 1 | |
| 491600160 | AMBULANCE BOX, FIRST AID KIT,RED BOX | 1 | |
| 4ZT36 | KIT, GREASING ACCESSORIES | 1 | |
| 500770-03 | KIT, RAIN REPELLANT COATING | 1 | |
| 53-70303 | WIRE RIVET HOLE BRUSH KIT 5 PC KIT, 3/32-1/4 PILOT | 1 | |
| 5837084-1 | WRENCH KIT, MOTIVE FLOW | 1 | |
| 5837828-1 | KIT,MANUAL OPEN-THRUST REVERSER | 2 | |
| 601R57-028K90A | KIT, REAMKIT FINAL BUSH, TOOL | 1 | |
| 601R57-028K91A | KIT, DRILL AND REAM | 1 | |
| 601R57-028K94 | KIT, REAMKIT FINAL BUSH, TOOL | 1 | |
| 601R57-046K2 | KIT, MLG TRUNNION HARDWARE (RH) | 1 | |
| 601R57-047K92A | KIT, DRILL AND REAM | 1 | |
| 601R5721009RT1 | KIT, REAMER TOOL LIST O/S BUSHING-NLG | 1 | |
| 601R5721009RT2 | KIT, REAMER TOOL LIST O/S BUSHING-NLG | 1 | |
| 61-74489-1 | WIRE KIT, ADD REDUNDANT PRESSURE SWITCH | 1 | |
| 62200-8900 | Manual Press for Micro-D Backshell Crimp Tool Kit, 9 Circuits | 1 | |
| 622008900 | MANUAL PRESS FOR MICRO-D BACKSHELL CRIMP TOOL KIT, 9 CIRCUITS | 1 | |
| 62201-6600 | Ribbon Cable Tool Kit, Press Not Included | 1 | |
| 62201-9800 | Manual Press for Micro-D Backshell Crimp Tool Kit, 15 Circuits | 1 | |
| 62202-0000 | Manual Press for Micro-D Backshell Crimp Tool Kit, 25 Circuits | 1 | |
| 64001-04W | AIRCRAFT WEIGHING KIT, WIRELESS | 1 | |
| 65-111-0RK | Kit, Repair | 1 | |
| 65-92528-1 | REPAIR KIT,A/C,MAINTENANCE | 4 | |
| 65-92528-11 | REPAIR KIT, HYDRAULIC TUBING (TEMP. REPAIRS ONLY) (APPROVED FOR TITANIUM) | 1 | |
| 65-92528-37 | REPAIR KIT, HYDRAULIC TUBING (TEMP. REPAIRS, OPERATING PRESSURES UP TO AND INCLUDING 3000 PSI) (APPROVED FOR TITANIUM) | 1 | |
| 65C37849-15 | TOP-KIT, RETROFIT, CABIN ALTITUDE PRESSURE SWITCH INSTALLATION | 1 | |
| 65C37849-22 | TOP KIT, RETROFIT TAIL STROBE LIGHT SYSTEM PROTECTION | 2 | |
| 65C37849-32 | TOP KIT,CABN ALTITUDE PRESSURE SWITCH INSTALLATION | 1 | |
| 65C38415-102 | TOP KIT, STIFFENER REPLACEMENT | 1 | |
| 6605743 | KIT,BRAKE RELEASE | 1 | |
| 66051349 | KIT, BRAKE RELEASE | 1 | |
| 6650-T700-003 | BORESCOPE KIT, ENGINE | 1 | |
| 670BA27059K1 | KIT, RUDDER TRAVEL LIMITER RETURN SPRING | 2 | |
| 670BA27062K90 | KIT, REAMERS | 3 | |
| 670BA27070K90 | KIT, REAMERS | 1 | |
| 670BA27070K90-1 | KIT, REAMERS | 2 | |
| 670BA57012K91A | TOOL KIT, WING TO FUSE DRILL AND REAMER | 1 | |
| 670BA57012K93A | TOOL KIT, DRILL AND REAMER | 1 | |
| 6796941 | KIT, INSTALL & REMOVAL SEAL | 4 | |
| 6F2810G00131 | TOOL KIT, FUEL TANK VALVE REM/INST | 1 | |
| 6F3220G00631 | TOOL KIT, NLG RETRACT ACTUATOR ALIGNEMENT | 1 | |
| 6F6310G00132 | TOOL KIT, FREEWHEEL REPLACEMENT | 1 | |
| 6F6400G00131 | TOOL KIT, T/R BUSHING REPLACEMENT | 1 | |
| 6F6430G02131 | TOOL KIT, T/R SLIDER BUSHING REPLACEMENT. | 1 | |
| 6F6520G00132 | TOOL KIT, IGB - TGB SEALS REPLACEMENT | 1 | |
| 6FT001-101 | REFORM TOOL KIT, DUC | 6 | |
| 7-262100016-601 | KIT, FUEL CELL REMOVE/INSTALL | 1 | |
| 7-562169100-601 | KIT, MAIN TRANSMISSION REMOVAL | 1 | |
| 7-563100076-607 | KIT, REMOVAL/INSTALLATION ,HORIZONTAL BEARING | 1 | |
| 715 | TIGAIR HEAVY DUTY PORTABLE HACKSAW KIT, BRAND: USATCO, MANUFACTURERS PART NO.:715 | 1 | |
| 74-451-AA | KIT, PATCH REPAIR-BLACK | 4 | |
| 747-MLG-1000 | KIT, SEAL REPLACEMENT 747-MLG-1000 | 3 | |
| 747-NLG-1000 | KIT, SEAL REPLACEMENT 747-NLG-1000 | 3 | |
| 76-794 | KIT, REAR SAET BELT | 1 | |
| 8.047.0068C | HIGH PRESSURE CLEANER,KIT,VERTIGO 28 PRO | 1 | |
| 800-0630 | KIT, LOAD615, USB429, WITH 3 YEAR SOFTWARE SUPPORT | 6 | |
| 802-0151 | FA2100 Rear PTI Kit, with Adapter | 1 | |
| 810-2007/KVS | TOOL KIT, BATTERY REPLACEMENT | 9 | |
| 810-2008/K | KIT, BATTERY, 30 DAYS ULB, REPL | 2 | |
| 81015 | TEST KIT, AERIAL REFUELING BOOM NOZZLE | 1 | |
| 81018 | TEST KIT, AERIAL REFUELING BOOM NOZZLE | 1 | |
| 825012-1 | WRENCH - KIT, ANTI-RATTLE | 1 | |
| 825012-8 | WRENCH - KIT, ANTI-RATTLE | 1 | |
| 83-008001-03 | KIT, TIRE PRESSURE SENSOR HAND HELD READER (120VAC) WITH CHARGER | 1 | |
| 83-008001-03E | KIT, TIRE PRESSURE SENSOR HAND HELD READER (120VAC) WITH CHARGER | 1 | |
| 83-008−03E | KIT, TIRE PRESSURE SENSOR HAND HELD READER (120VAC) WITH CHARGER | 1 | |
| 831440-2 | KIT, BORESCOPE | 1 | |
| 831702-22 | KIT, ENGINE CONDITION TREND MONITORING | 2 | |
| 856A1310 | KIT, BORESCOPE GUIDE - HP TURBINE | 1 | |
| 856A1310G01 | KIT,BORESCOPE GUIDE-HP TURBINE | 19 | |
| 856A1310P03 | KIT, BORESCOPE GUIDE - HP TURBINE | 14 | |
| 856A1320 | BORESCOPE KIT, RIGID | 1 | |
| 856A1351P01 | KIT, BORESCOPE GUIDE - HP TURBINE | 14 | |
| 856A1520G01 | CHILLING KIT, HPTR AND HPCR ASSEMBLY PROCEDURE (CHILLING KIT) | 1 | |
| 856A1520G02 | Chilling Kit, HPTR and HPCR Assembly Procedure | 4 | |
| 856A1717P01 | TOOL KIT, PRESERVATION | 3 | |
| 856A1717P02 | TOOL KIT, PRESERVATION | 2 | |
| 856A2824 | KIT, INSTALL/REMOVE - SPOOL AGB (INSTALL/REMOVE KIT) | 1 | |
| 856A2824G01 | Kit, Install/Remove - Spool AGB (install/remove kit) | 4 | |
| 856A3780 | KIT, REMOVAL / INSTALLATION AGB / TGB BEARINGS | 1 | |
| 856A3780G01 | KIT, REMOVAL / INSTALLATION AGB / TGB BEARINGS | 1 | |
| 856A3780G02 | KIT, REMOVAL/INSTALL | 5 | |
| 856A3780G02 | REMOVAL / INSTALLATION KIT, AGB / TGB BEARINGS | 5 | |
| 856A3780G03 | Kit, Removal/Installation AGB/TGB Bearings (removal/installation kit) | 4 | |
| 856A3780G03 | REMOVAL / INSTALLATION KIT, AGB / TGB BEARINGS | 4 | |
| 856A3922 | KIT, REMOVAL/INSTALLATION AGB/ | 1 | |
| 856A3922G01 | Kit, Removal/Installation AGB/TGB Bearings (removal/installation kit) | 2 | |
| 856A3957G01 | KIT, BUSHING REMOVAL - OIL TANK | 1 | |
| 856A4133G01 | Kit, Refacing | 1 | |
| 856A4134 | (RT) KIT, REFACING | 1 | |
| 856A4134G0 | KIT, REFACING - SPHERICAL FITTINGS, EXTERNAL (REFACING KIT) | 1 | |
| 856A4134G01 | Kit, Refacing | 1 | |
| 856A4704G02 | ECI KIT, DOVETAIL SLOT - FAN DISK REWORKED | 1 | |
| 856A4704G03 | ECI KIT, DOVETAIL SLOT - FAN DISK REWORKED | 1 | |
| 856A4714G01 | ECI KIT, LATERAL SIDES OF THE BORE AREA - FAN DISK | 1 | |
| 856A5564 | (RT) KIT, RESURFACING | 1 | |
| 856A5564G01 | KIT, RESURFACING - SPHERICAL END TUBE COUPLING | 1 | |
| 856A5564P01 | KIT, RESURFACING | 2 | |
| 895-3130-09-101 | TOOL,KIT,T/R PITCH CHANGE LINK BEARING REPLACEMENT (NSCM A0126) | 1 | |
| 895-3130-13-107 | TOOL KIT,T/R PITCH CHANGE LINK BEARING REPLACEMENT (NSCM A0126) | 1 | |
| 8G6000G00131 | PULLER KIT, M/R AND T/R UPPER CONICAL RING REM | 1 | |
| 8G6210G00231 | TOOL KIT, M/R BLADE RETENTION BOLT REM / INSTL | 1 | |
| 8G6220G00631 | TOOL KIT, M/R FLANGED BUSHING REM / INSTL | 1 | |
| 8G6220G01931 | TOOL KIT, M/R DAMPER ATTACHMENT BOLT REM | 1 | |
| 8G6220G03431 | TOOLKIT, M/R DAMPER ATTACHING .BOLT REMOVAL | 1 | |
| 8G6220G03631 | TOOL KIT, M/R DAMPER ATTACHING BOLT REMOVAL (GK-25-00) | 1 | |
| 8G6230G02631 | TOOL KIT,M/R SCISSOR BUSHINGS REPL | 1 | |
| 8G6320G01032 | TOOL KIT,MGB DRIVE SEAL REPLACEMENT | 1 | |
| 8G6320G11432 | TOOL KIT, INPUT FLANGE/GIMBAL REPL | 1 | |
| 8G6320G1443! | TOOL KIT, T/R DRIVE QUILL RING NUT REM/INST | 1 | |
| 8G6320G14431 | TOOL KIT, T/R DRIVE QUILL RING NUT REM/INST | 1 | |
| 8G6320GL1432 | TOOL KIT, INPUT FLANGE/GIMBAL REPL | 1 | |
| 8G6430G00231 | TOOL KIT, T/R SLIDER BUSHING REPLACEMENT | 1 | |
| 8G6430G03331 | TOOL KIT, T/R DUPLEX BEARING REM / INSTL | 1 | |
| 8G6430G04931 | TOOL KIT, T/R BUSHINGS REPLACEMENT | 1 | |
| 8G6430G07632 | TOOL KIT, T/R SLIDER BUSHING REPLACEMENT | 1 | |
| 8MK4864-001 | KIT, RETROFIT, ACCESS PANEL 6 | 1 | |
| 8MK4916-001 | KIT, INSPECTION/REPAIR, MAIN LANDING GEAR | 1 | |
| 8SC5021-003 | KIT, FLYAWAY, PROPELLER RESTRAINT | 3 | |
| 9002-01-9201-01 | 3 SENSOR KIT, TEMPERATURE | 1 | |
| 9002-01-9202-01 | SENSOR KIT, TEMPERATURE | 1 | |
| 906-10246-3 | KIT, TESTER, LOOP RESISTANCE | 17 | |
| 915-16897-1 | KIT, VIBREX 2000 PLUS BALANCER | 1 | |
| 915-17272-1 | KIT, TIP TARGET SET W/HARDWARE | 1 | |
| 92168 | PARTS KIT, GREASE | 1 | |
| 9471M44P01 | KIT, BOREBLENDING- ROTOR | 1 | |
| 956A1602 | KIT, PRESERVATION - ENGINE FOR LEAP-1A/-1B/-1C ENGINES | 1 | |
| 956A1602P01 | KIT, PRESERVATION - ENGINE | 5 | |
| 956A1602P01-IAS | KIT, PRESERVATION - ENGINE | 1 | |
| 956A1602P02 | KIT, PRESERVATION - ENGINE | 1 | |
| 956A1603G01 | KIT, BORESCOPE GUIDE | 4 | |
| 97840A66 | PARTS KIT, WIRE ROPE | 1 | |
| 97F57508704000 | TOOL KIT, REPAIR - F | 4 | |
| 983-9503-004 | REGION KIT, SHOWTIME | 1 | |
| 98D27504040000 | TOOL KIT,AIRCRAFT MAINTENANCE;|TOOL RESTRAINING TK1; | 16 | |
| 98D35208729001 | KIT, AIRBUS O2 PRESSURE RELEASE | 9 | |
| 98D47209001000 | VACUUM & PRESSURE TEST KIT, IGGS | 13 | |
| 98D53308002000 | KIT, LUG REPAIR REAMER | 3 | |
| 98D56003002000 | TOOL KIT, WINDSHIELD REPAIR | 1 | |
| 98D57004023000 | TOOLKIT TOOL KIT, REM.-INST.,STAY BUSH | 1 | |
| 98D57004025000 | KIT KIT, REM.-INST. - PINTLE BUSHES | 5 | |
| 98D57004025001 | KIT KIT,REM.-INST.-PINTLE BUSHES | 2 | |
| 98D57004025002 | KIT, REM.-INST. - PINTLE BUSHES | 1 | |
| 98L57703001000 | REPAIR KIT, SPOILER BEARING | 1 | |
| 98S12005003000 | CASE-TOOL KIT,SET FOR REPLENESHING OF HYDRAULIC PETROLEUM FLUID | 2 | |
| 98V55109007000 | WRENCH KIT, THS REAR | 3 | |
| 98V57004019000 | R/I KIT, MLG RETRACTION ACTUATOR | 1 | |
| 99-7136-6000 | KIT, HATCH INSTALL AND REM TOL | 1 | |
| 99L51107323000 | Airbus Glare Block Kit, A380 51-10-23-991-004-A | 1 | |
| 9C1386G02 | Kit, Lube system preservation GE90-94B/115B | 1 | |
| 9C1461 | PRESERVATION KIT, FUEL | 1 | |
| 9C1461G01 | KIT, PRESERVATION FUEL SYSTEM | 1 | |
| 9C1477 | KIT, ROSAN STUD REMOVAL | 1 | |
| 9C1477P01 | KIT, STUD REPLACEMENT | 1 | |
| 9C1604G05 | TOOL KIT, SETTING FOR ADJUSTMENT OF VSV/GV(MEASUREMENT TOOL) | 1 | |
| 9C2318 | KIT, WRENCH | 1 | |
| A20011 | REMOVAL/INSTALLATION KIT, LG BUSHING | 1 | |
| A330-92405-0003 | Tool kit, Greasing | 1 | |
| ACS87021-301 | KIT, LOCK OUT THRUST REVERSER | 4 | |
| ADCRJ-612 | KIT, PITOT PRESSURE CONNECTOR TEST | 11 | |
| ADCRJ612 | Barfield ADCRJ612 Air Data Accessory Kit, For Canadair Regional Jet | 11 | |
| AFK-1014 | Custom Ultrasonic Kit, PART 4 53-10-13 for the WING REAR SPAR - STA 663.75 REAR SPAR BULKHEAD SIDE FRAME FITTING FAIL SAFE STRAP. Kit includes 1 of each AFM-560AT & AFS-0541 Transducers, 1 NDT3312 Reference Standard and 1 ABNC-MD6. Supplied with a waterpr | 1 | |
| AFK-ARR.156-.500SE | RECHII ROTARY BOLT- HOLE PROBE KIT, 8 SPLIT END ROTARY PROBES SUPPLIED WITH A RECHII CONNECTOR(4 PIN STEP LEMO) FOR USE WITH THE OLYMPUS RA SCANNER. INCLUDES THE FOLLOWING BOLT-HOLE SIZE RANGES: .156"-.187", .187"-.218", .218"-.250", .250"-.281", .281"-.3 | 1 | |
| AFK-AUR12SS-1 | Open Hole Eddy Current Probe Kit, total of 12 stainless steel rotary probes with a shaft length of 70mm long supplied with a universal 4 pin Fischer connector. Probe Diameters: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2. Suppli | 1 | |
| AFK-AURFBSE-12 | UNIVERSAL ROTARY FLAT BOTTOM EXPANDABLE PROBE KIT, 12 PROBES SUPPLIED WITH A 4 PIN FISCHER CONNECTOR 1.5" WORKING LENGTH, 100KHz-2MHz FREQUENCY RANGE. THE FOLLOWING PROBE SIZES ARE INCLUDED IN THE KIT. AURFB-.125SE/1.5WL, AURFB-.156SE/1.5WL, AURFB-.187S | 1 | |
| AGE-00343-401 | KIT, RUDDER BACKLASH MEASUREMENT | 9 | |
| AGE-00343-801 | KIT, BACKLASH MEASSUREMENT RUDDER | 1 | |
| AGE-00539-401 | KIT, AILERON BACKLASH MEASUREMENT | 6 | |
| AGE-00545-401 | KIT, HORIZ. STAB. BACKLASH MEASUREM | 7 | |
| AGE-01410-401 | KIT, BACKLASH MEASUREMENT, RUDDER | 8 | |
| AGE-02532-401 | KIT, BRAKE PRESSURE MEASUREMENT | 1 | |
| AGE-03841-401 | KIT, BRAKE PRESSURE MEASUREMENT | 9 | |
| AGE-04267-401 | KIT, BACKLASH MEASUREMENT, ELEV/AIL | 6 | |
| AGE01616-401 | KIT, BACKLASH MEASUREMENT - THS | 1 | |
| AGE03841-401 | MEASUREMENT KIT, BRAKE PRESSURE | 9 | |
| AGE15177 | KIT, CLOSURE | 1 | |
| AGE15189 | KIT, CLOSURE | 1 | |
| ANDT3016-B | KIT, SEAL REPLACEMENT | 4 | |
| AS-73-0096-01 | TOOL KIT, PRESERVATION | 1 | |
| ASXX798 | TRAFIC WAND KIT,RED | 1 | |
| ATISK3539A8 | ROLLER CLUTCH WRENCH KIT, 8-PC | 2 | |
| ATR42-612 | KIT, AIR DATA ACCESSORIES - CORRECT P/N | 14 | |
| ATR42V200 | KIT, GREASING TOOLS | 7 | |
| B54018-24 | Rem / Install Kit, Fuse Pin | 1 | |
| BK5700-1 | KIT, BK5700 PCBA, REAR LBLS | 1 | |
| C10-118 | KIT,SAFE-T-CABLE .020 WIRE AND FERRULES | 3 | |
| C10-118PKG | KIT,SAFE-T-CABLE .020 WIRE AND FERRULES | 2 | |
| C25001-1 | WRENCH - KIT, ANTI-RATTLE | 9 | |
| C32029-38 | PIN REMOVAL AND INSTALLATION KIT, MAIN LANDING GEAR | 6 | |
| C32029-45 | PIN INST/REM KIT, MLG | 18 | |
| C32044-1 | FREEPLAY CHECK KIT, NLG | 11 | |
| C54009-27 | Removal/Installation Kit, Fuse Pin | 10 | |
| C54011-59 | REM/ INST KIT, FUSE | 8 | |
| C5M80C2L1 | ACCESSORY KIT, BORESCOPE CF6 | 1 | |
| C71003-246 | KIT, BOOTSTRAP, CFM56-3ENG, REPLACES 191 | 4 | |
| CA21038K-100 | REPAIR KIT, FASTENER - PANEL | 1 | |
| CAABGB300200ZZZ066ZD | COMPRESSOR KIT, ICE PROTECTION AND AIR CONDITIONING SYSTEM | 1 | |
| CAT5894-5 | KIT, BUSHING REMOVAL/INSTALLATION TOOL | 1 | |
| CATSSMTK14 | TOOL KIT, AFR REPAIR | 1 | |
| CS-295-AG131 | Compressor Kit, Ice Protection System | 1 | |
| CS-295-AG131-D | COMPRESSOR KIT,ICE PROTECTION & AIR CONDITIONING S | 1 | |
| CS-295-AG131-F | COMPRESSOR KIT, ICE PROTECTION AND AIR CONDITIONIN | 1 | |
| CS-295-AG131-X | Compressor Kit, Ice Protection and Air Conditioning System | 1 | |
| CS-295-AG131-X?? | COMPRESSOR KIT, ICE PROTECTION AND AIR CONDITIONIN | 1 | |
| CS-295-AG131-X | COMPRESSOR KIT, ICE PROTECTION AND AIR CONDITIONIN | 1 | |
| CS-295-RC114 | COMPRESSOR KIT, ICE PROTECTION AND AIR CONDITIONING SYSTEM - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| CT4447-1 | TEST PROBES DIFFERENTIAL PROBE KIT, 30MHZ, 700V, 10X/100X, CTUVUS LIST | 1 | |
| CTE 6181 | KIT, BORESCOPE | 3 | |
| CUTA1870104C | TOOL KIT, INSERT INSTALLATION-REMOVAL | 5 | |
| D111911-3 | BORESCOPE KIT,ENGINE | 1 | |
| DAT08AEFKT5003 | REPAIR KIT, HYDRAULIC TUBING (TEMP. REPAIRS, OPERATING PRESSURES UP TO AND INCLUDING 3000 PSI) (APPROVED FOR TITANIUM) | 4 | |
| DCC2560T1 | DEWALT FLEXVOLT 60V MAX* AIR COMPRESSOR KIT, CORDLESS, 2.5 GALLON (DCC2560T1) | 1 | |
| DCGG571M1 | DEWALT 20V MAX GREASE GUN KIT, CORDLESS | 2 | |
| DH8-723M | KIT, PITOT/STATIC PRESSURE TEST ADAPTER | 10 | |
| DLT20PSKT3000 | TUBE REPAIR KIT, SIZE 08 AND 10 | 4 | |
| DLTFRPSKT3004 | KIT, FIELD REPAIR, HYD | 11 | |
| DLTFRPSKT3008 | FIELD REPAIR KIT, PUMP | 7 | |
| DLTFRPSKT3020 | KIT, HYDRAULIC PIPE, SWAGE REPAIR | 4 | |
| DLTFRPSKT3027 | FIELD REPAIR KIT, PUMP | 9 | |
| DLTFRPSKT3028A | REPKIT REPAIR KIT, FIELD - SIZE 04 TO | 6 | |
| DLTFRPSKT3300 | REPAIR KIT, 3000 PSI | 4 | |
| DMC1264 | KIT, CRIMP TOOL - ELECTRICAL CONNECTOR REF FOUND IN STANDARD WIRE PRACTICES MANUAL (SWPM). (DANIELS MANUFACTURING CORPORATION) | 7 | |
| DMC1319 | KIT, AVIONICS REPAIR | 4 | |
| DMC584 | KIT, AVIONIC REPAIR TOOL | 6 | |
| DMC872MOD1 | KIT, AVIONIC REPAIR | 6 | |
| DMC95 | KIT, CONTACT RETENTION | 2 | |
| DMC973 | KIT, AVIONIC REPAIR TOOL (FOR COMAIR) | 2 | |
| DSS1027 | KIT, WINDSHIELD WATER REPELLANT | 4 | |
| DSS1040 | MASTER KIT, RAIN-RE-PELLENT | 3 | |
| DSS4040 | MASTER KIT, RAIN-RE- PELLENT | 3 | |
| EMH-5601 | TOOL KIT,SCREW THRE | 1 | |
| EWF-80-R | TOOLKIT, ELECTRIC WARFARE | 1 | |
| F66209 | TEST KIT, AERIAL REFUELING | 1 | |
| F70158-505 | Kit，bearing assy-removal instl stabilizer trim | 2 | |
| F70207-109 | KIT, RIGGING PINS (ALL SYSTEMS) (FOR L/N 1376 & ON, F70207-128 IS ALSO REQUIRED) | 27 | |
| F7672600-2 | TEST KIT, FIRE BOTTLE PLUMBING LEAK | 1 | |
| F80143-2 | KIT, SPECIAL WRENCH - BODY FUEL TANK | 1 | |
| FB-6332-2K | SPARES-AFTERMARKET SHOCK MOUNT KIT,INC, BOLTS, WASHERS | 1 | |
| FB98D0064 | TOOL KIT,AIRCRAFT MAINTENANCE;|TOOL RESTRAINING TK1; | 1 | |
| FBP-787-1 | KIT, CCR FIBER OPTIC, LONG REACH - BOEING 787 | 4 | |
| FBP-787-CCR | KIT, CCR FIBER OPTIC, LONG REACH - BOEING 787 | 1 | |
| FHR8-2 | FHR8-2 FUELSTAT RESINAE PLUS TEST KIT, | 10 | |
| FIR-307-Q | TOOLKIT, FIRE CONTROL | 1 | |
| G-1392-100-S | KIT, CYLINDER PIN REPLACEMENT | 1 | |
| G01J3P3 | KIT, CRIMP TOOL - ELECTRICAL CONNECTOR REF FOUND IN STANDARD WIRE PRACTICES MANUAL (SWPM) (GRAPHIC DATAKITS INTERNATIONAL (6495 CORP.)) | 1 | |
| G1002731001-001 | TOOL KIT, ELEVATOR BALANCING FIXTURE | 2 | |
| G1003411002-027 | KIT, FIXTURE LEVELING STANDBY PITOTPROBE | 2 | |
| G1003411003-001 | KIT, LEVELING FIXTURE, STANDBY PITOT | 2 | |
| G1003411003-001 | KIT, LEVELING FIXTURE, STANDBY | 2 | |
| G1007300001-001 | KIT, ENGINE MOTIVE FLOW PRESSURE TEST | 1 | |
| G25012 | WRENCH - KIT, ANTI-RATTLE | 1 | |
| G25012-1 | WRENCH - KIT, ANTI-RATTLE | 3 | |
| G25012-8 | WRENCH - KIT, ANTI-RATTLE | 12 | |
| G32041-38 | Wrench Kit, BLG | 6 | |
| G32080-1 | BRACKET HOLDING ASSEMBLY AND WRENCH KIT, MACHINED BRACKET, WLG | 1 | |
| G54008-68 | REMOVAL/INSTALLATION KIT, FUSE PIN - PW4000 AND CF6-80C2 ENGINES | 5 | |
| G600-100025-1 | KIT, APU REMOVAL/INSTALLATION | 3 | |
| G600-210004-197 | KIT, PNEUMATIC, PRESSURE TEST | 2 | |
| G600-210004-219 | KIT, PNEUMATIC, PRESSURE TEST | 2 | |
| G600-210004-221 | KIT, PNEUMATIC PRESSURE TEST 115 V/60HZ | 2 | |
| G600-210004-225 | MATERIAL DESCRIPTION KIT, PNEUMATIC PRESSURE TEST 220V-50HZ | 1 | |
| G600-210004-227 | KIT, PNEUMATIC PRESSURE TEST 220V/50HZ | 2 | |
| G600-210007-227 | KIT, PNEUMATIC PRESSURE TEST 220V/50HZ | 1 | |
| G600-240009-181 | KIT, ALL SYSTEMS BREAKOUT BOX | 2 | |
| G600-270033-149 | KIT, CNTRL WHEELCOLUMN RIGGING FIXTURES | 3 | |
| G600-270042-1 | KIT, BACKLASH MEASUREMENT | 1 | |
| G600-272002-111 | KIT, FIXTURE RUDDER RIGGING NEUTRAL POS. | 3 | |
| G600-272002−111 | KIT, FIXTURE RUDDER RIGGING NEUTRAL POS. | 3 | |
| G600-272003-1 | KIT, PORTABLE BEARING REMOVAL | 1 | |
| G600-280004-73 | KIT, BREATHING APPARATUS | 1 | |
| G600-320024-145 | KIT, BRAKE PRESSURE | 3 | |
| G600-324006-1 | KIT, DIGITAL TIRE GAUGE | 2 | |
| G600-561101-1 | KIT, WINDOW/WINDSHIELD REMOVAL | 2 | |
| G600-574014-1 | KIT, MLG TRUNNION REPAIR | 1 | |
| G601-210007-199 | KIT, PNEUMATIC PRESSURE TEST 115V/60HZ | 2 | |
| G601-210007-201 | KIT, PNEUMATIC PRESSURE TEST 220-240V/50 | 3 | |
| G601-780002-177 | KIT, THRUST REVERSER, RIGGING TOOL | 6 | |
| G601-780002-177 | KIT, THRUST REVERSER, RIGGING T | 6 | |
| G601R280001-1 | KIT, BREATHING APPARATUS | 3 | |
| G601R291004-25 | KIT, SAMPLING HYDRULIC RETURN LINE | 5 | |
| G601R291004-25 | KIT, SAMPLING HYDRULIC RETURN L | 5 | |
| G601R324302-1 | KIT, BRAKE PRESSURE TEST | 3 | |
| G601R491001-1 | Kit, APU removal/ installation | 8 | |
| G604-213101-1 | KIT, CABIN PRESSURE LEAK TEST | 4 | |
| G604-490001-77 | KIT, APU REMOVAL AND INSTALLATION | 3 | |
| G670-2752001-101 | KIT, SKEW SENSOR BREAK-OUT | 1 | |
| G670324001-1 | KIT, BRAKE PRESSURE TEST OIL | 2 | |
| G700-210004-39 | KIT, FUS PRESS LEAK CHECK | 2 | |
| G700-215201-1 | KIT, ECS PACK REMOVAL | 1 | |
| G700-240002-41 | KIT, BREAK OUT BOX ALL SYSTEMS | 3 | |
| G700-243201-101 | GSE KIT, APU BATTERY REMOVAL/INSTALL | 1 | |
| G700-270004-1 | KIT, F/C BEARING REM/INSTL (PORTABLE) | 2 | |
| G700-272102-169 | KIT, FIXTURE RUDDER RIGGING | 1 | |
| G700-272102-179 | KIT, FIXTURE RUDDER RIGGING | 5 | |
| G700-273001-1 | KIT, ELEVATOR PCU BOLT REMOVER | 1 | |
| G700-273002-1 | KIT, REAMERS ELEVATOR PCU FITTINGS | 1 | |
| G700-281301-1 | KIT, FUEL, PRESSURE TEST | 2 | |
| G700-281301-129 | KIT, FUEL PRESSURE TEST | 1 | |
| G700-321108-1 | KIT, MLG BUSHING / BEARING REMOVAL TOOL | 3 | |
| G700-322001-1 | KIT, SEAL REPL TOOLS, NLG SHOCK STRUT | 2 | |
| G700-350001-1 | KIT, GAUGE, OXYGEN BOTTLE PRESSURE CHECK | 4 | |
| G700-350001−1 | KIT, GAUGE, BOTTLE PRESSURE CHECK | 4 | |
| G700-351001-1 | KIT, CREW OXYGEN-SYSTEM TEST | 1 | |
| G700-521109-1 | KIT, RESTRAINT PASS DOOR | 1 | |
| G700-553001-1 | KIT, FTI RETAINER INSTALLATION | 1 | |
| G700-573003-57 | KIT, WNGLT FTG AND REAR SPAR INSTL | 2 | |
| G700-575107-1 | KIT, INBOARD FLAP RIB BUSHING REPAIR | 3 | |
| GF-93-00 | TOOL KIT, IBG BUSHING REPLACEMENT | 1 | |
| GK-25-00 | TOOL KIT, M/R DAMPER ATTACHING BOLT REMOVAL | 1 | |
| GS11655-1 | KIT, CLOSURE | 2 | |
| GS12755-2 | KIT, TEMPERATURE CONTROL | 1 | |
| GS14761-1 | KIT, WIRE GAGE | 1 | |
| GS18-113 | REPAIR KIT, HOT MELT, PORTABLE | 1 | |
| GS19650-1 | CLOSURE KIT, 767 | 1 | |
| GS19671-1 | KIT, CLOSURE-VALVE, MODULATING | 1 | |
| GS19779-1 | KIT, CLOSURE-VALVE | 1 | |
| GS20139-1 | CLOSURE KIT, VALVE | 1 | |
| GS20151-1 | KIT, CLOSURE DUAL HEATER EXCHANGER | 1 | |
| GS20157-1 | KIT, CLOSURE AIR CYCLE MACHINE | 1 | |
| GS20388 | KIT, BEARING PRESS | 1 | |
| GS20388-1 | KIT, BEARING PRESS | 1 | |
| GS20388-2 | KIT, BEARING PRESS | 1 | |
| GS20682-1 | KIT, BEARING REMOVER | 1 | |
| GS21192-1 | KIT, BRAKE SPANNER WRENCHES | 1 | |
| GS21413-1 | ADAPTER KIT, INCREASE HEIGHT | 1 | |
| GS21757-1 | CLOSURE KIT, ACTUATOR, STATOR | 1 | |
| GS21758-1 | CLOSURE KIT, ACTUATOR | 1 | |
| GS21761-1 | CLOSURE KIT,VALVE, FUEL BYPASS | 1 | |
| GS21903-5 | KIT, PROOF PRESS TEST | 1 | |
| GS21914-1 | CLOSURE KIT, VALVE, PRESSURE REG. | 2 | |
| GS22257-1 | CLOSURE KIT, CONTROLLER, PRESSURE | 1 | |
| GS22496-1 | KIT, SEAL PLATE REMOVER | 2 | |
| GS22653-1 | KIT, WRENCH | 1 | |
| GS23235-1 | KIT, CLOSURE | 1 | |
| GS23420-1 | TOOL KIT, COMPRESSOR | 17 | |
| GS23426-1 | KIT, ACTUATOR RETAINER UNIT | 3 | |
| GS23880-1 | WRENCH KIT, ROTOR RET. NUT | 2 | |
| GS24166-1 | RETROFIT KIT, BOROSCOPE POSITIONING FIXTURE; 24PF | 1 | |
| GSB0700025 | KIT, PW-150 ENGINE STRAP REPL | 1 | |
| GSB1210003 | COUPLING KIT, RESERVOIR SERVICE | 2 | |
| GSB1216012 | KIT, NITROGEN CHARGING AND GAUGING,LOW PRESSURE, 0 TO 500 PSI (0 TO 3447 KPA) | 2 | |
| GSB2111004-240 | KIT, TEMPERATURE BATH | 1 | |
| GSB2111004−140 | KIT, TEMPERATURE BATH | 1 | |
| GSB2800001 | KIT, SPARK-FREE BREATHING APPARATUS | 1 | |
| GSB3411012 | KIT, PITOT/STATIC PRESSURE TEST ADAPTER) | 1 | |
| GSE 060 | KIT, BACKLASH MEASUREMENT | 1 | |
| GSE 069 | KIT, RUDDER BACKLASH MEASUREMENT | 1 | |
| GSE 088 | GSE 088 - KIT,MANUAL OPEN-THRUST REVERSER | 1 | |
| GSE 467 | KIT, BRAKE PRESSURE MEASUREMENT | 1 | |
| GSE55891 | WRENCH - KIT, WLG | 1 | |
| GSW81.5-1 | CLOSURE KIT, C-130J ECS CONTROLLER | 1 | |
| Gedore-D18205 | Gedore D18205 CAPTURE SENSOR/HUB / FMT M.KIT, Capture Sensor | 1 | |
| HCS2038-02 | VACCUMLEAKDETECTORKIT,REQ | 1 | |
| HK-1069 | KIT, REPL. INTERNAL PAR | 1 | |
| HK-1900 | KIT, REPL. RELEASE SCREW | 1 | |
| HK-1907 | KIT, REPL. RELEASE SCREW | 1 | |
| HK-1923 | KIT, REPL. CYLINDER SEAL | 1 | |
| HK-3291 | Kit, Repl. Cylinder Seals | 1 | |
| HK-3444 | KIT, SEAL REPLACEMENT | 1 | |
| HK-3614 | KIT, REPL FILTER ELEMENT | 5 | |
| HK-3697 | Kit, Repl. Mechanical Ext. | 1 | |
| HK-3709 | Kit, Pump Seal Repair (Mb) | 1 | |
| HK-3710 | Kit, Air End Repair | 1 | |
| HK-3711 | Kit, Pump Seal Repair (Pe) | 1 | |
| HK-3717 | Kit, Handle Replacement | 2 | |
| HK-3751 | KIT, REPLACEMENT ELEMENT | 1 | |
| HK-3768 | Kit, Handle Replacenent | 1 | |
| HK3614 | KIT, REPL FILTER ELEMENT | 5 | |
| HMU100-2 | TOOL KIT, WBHS PRESSURE TEST | 1 | |
| HP-100 | KIT, RESTORATION, WINDSHIELD | 5 | |
| HSK6263-1 | TEST KIT, DECOMPRESS | 35 | |
| HU82137 | REPAIR KIT, MVP, (GREY) | 2 | |
| HU82143 | REPAIR KIT, COVER - DROP OVER (GREY) | 1 | |
| HUM-BUG | KIT, MICROBIAL GROWTH DETECTION (PROCURE LOCALLY TO REPLENISH) | 6 | |
| IAE1R8254 | ROTATOR KIT, NO.2 OR OR KIT, ROTATOR - BORESCOPE INSPECTION | 1 | |
| IAE2F10057 | KIT, ROTATOR - BORESCOPE INSPECTION | 2 | |
| IAE2F10066 | KIT, ROTATOR - BORESCOPE INSPECTION | 5 | |
| IPLEX RX 6MM 3.5M VIDEOSCOPE | BORESCOPE KIT, VIDEO PROBE | 1 | |
| IPLEX RX 6MM 3.5M VIDEOSCOPE WITH STEREOMEASUREMEN | BORESCOPE KIT, VIDEO PROBE | 1 | |
| IPLEX RX 6MM 3.5M VIDEOSCOPE WITH STEREOMEASUREMENT CAPABILITY | BORESCOPE KIT, VIDEO PROBE | 1 | |
| IPLEX RX 6mm 3.5m videoscope | BORESCOPE KIT, VIDEO PROBE | 1 | |
| IPLEX RX 6mm 3.5m videoscope with StereoMeasurement capability | BORESCOPE KIT, VIDEO PROBE | 1 | |
| IRP0125 | PARTS KIT, REFERENCE - BOLT HOLES, EDDY CURRENT (NDI) | 1 | |
| J32036-56 | WRENCH KIT, LANDING GEAR | 5 | |
| J32042-089 | WRENCH KIT, LANDING GEAR | 1 | |
| J32042-89 | WRENCH KIT, LANDING GEAR | 18 | |
| J32085-76 | WRENCH KIT,MLG AND NLG | 10 | |
| J32085-77 | WRENCH KIT, MLG AND NLG (777-200LR, F) | 9 | |
| J32085-87 | Wrench Kit, MLG and NLG | 4 | |
| J32085-87 | WRENCH KIT,FOR MAIN & NOSE LANDING GEARS | 4 | |
| J32085-88 | WRENCH KIT, MLG AND NLG (777-200LR, F) | 4 | |
| J54007-43 | Removal/Installation Kit, | 2 | |
| J55001 | Kit, Bearing Remove | 1 | |
| JPK4 | PLIERS KIT, JOURNEYMAN, 4 PIECE, INCLUDING 8" DIAGONAL CUTTER, 8" HD LONG-NOSE WITH SIDE CUTTER AND WIRE STRIPPER, 9" NE-STYLE SIDE CUTTER WITH CRIMPER AND 9" CABLE CUTTER, MAKE: KLEIN TOOLS | 1 | |
| K-1000 | Kit, Repl. Hand Pump Seal | 6 | |
| K-1001 | Kit, Repl. Hand Pump Seal | 9 | |
| K-1029 | Kit, Repl. Hand Pump Seal | 1 | |
| K-1030 | Kit, Repl. Hand Pump Seal | 3 | |
| K-1031 | Kit, Repl. Hand Pump Seal | 1 | |
| K-1032 | Kit, Repl. Hand Pump Seal | 4 | |
| K-1035 | Kit, Repl. Seal, Ram | 1 | |
| K-1049 | Kit, Repl. Seal, Ram | 4 | |
| K-1050 | Kit, Repl. Seal, Ram | 7 | |
| K-1051 | Kit, Repl. Seal, Ram | 6 | |
| K-1061-01 | Kit, Repl. Reservoir (P) | 1 | |
| K-1061-02 | Kit, Repl. Reservoir | 1 | |
| K-1061-04 | Kit, Repl. Reservoir | 2 | |
| K-1061-06 | Kit, Repl. Reservoir (P) | 1 | |
| K-1061-07 | Kit, Repl. Reservoir (P) | 1 | |
| K-1061-07-A1 | Kit, Repl. Reservoir (P) | 1 | |
| K-1061-08 | Kit, Repl. Reservoir (P) | 1 | |
| K-1061-10 | Kit, Repl. Reservoir (P) | 1 | |
| K-1068 | Kit, Repl. Pump Linkage | 3 | |
| K-1069 | Kit, Repl. Pump Inter Part | 2 | |
| K-1077 | Kit, Repl. Seal Pump | 1 | |
| K-1078 | Kit, Repl. Seal Pump | 1 | |
| K-1083 | Kit, Repl. Cylinder Seal | 1 | |
| K-1095 | Kit, Repl. Internal Parts | 2 | |
| K-1096 | Kit, Repl. Pump Seal | 1 | |
| K-1097 | Kit, Repl. Pump Seal | 1 | |
| K-1101 | Kit, Repl. Release Screw | 1 | |
| K-1108 | Kit, Repl. Cylinder Seal | 1 | |
| K-1109 | Kit, Repl. Eyebolt | 1 | |
| K-1110 | Kit, Repl. Shock Spring | 1 | |
| K-1111 | Kit, Repl. Sleeve (Out/In) | 1 | |
| K-1112 | Kit, Repl. Wheel (Single) | 5 | |
| K-1114 | Kit, Repl. Caster (Set) | 2 | |
| K-1115 | Kit, Repl. Shock Bolt(Set) | 1 | |
| K-1119 | Kit, Repl. Sliding Pin | 2 | |
| K-1121 | Kit, Repl. Wear Sleeve | 1 | |
| K-1123 | Kit, Repl. Sliding Pin | 1 | |
| K-1124 | Kit, Repl. Ax. Adapt (Set) | 1 | |
| K-1125 | Kit, Repl. Axle Locking | 1 | |
| K-1126 | Kit, Repl. Shock Assembly | 1 | |
| K-1127 | Kit, Repl. Sliding Pin | 1 | |
| K-1129 | Kit, Repl. Sliding Pin | 1 | |
| K-1130 | Kit, Repl. Pin Assy | 1 | |
| K-1131 | Kit, Repl. Bearing (Set) | 2 | |
| K-1132 | Kit, Repl. Cylinder Seal | 1 | |
| K-1140 | Kit, Repl. Eyebolt | 2 | |
| K-1141 | Kit, Repl. Shock Spring | 1 | |
| K-1142 | Kit, Repl. Sleeve (Out/In) | 1 | |
| K-1143 | Kit, Repl. Wheel (Single) | 1 | |
| K-1146 | Kit, Repl. Shock Assembly | 1 | |
| K-1154 | Kit, Repl. Sliding Pin | 1 | |
| K-1156 | Kit, Repl. Sliding Pin | 2 | |
| K-1162 | Kit, Repl. Ax. Adapt (Set) | 1 | |
| K-1163 | Kit, Repl. Actuator Link. | 1 | |
| K-1164 | Kit, Repl. Caster (Single) | 2 | |
| K-1165 | Kit, Repl. Wheel (Set) | 1 | |
| K-1172 | Kit, Repl. Wire Rope Fwd | 1 | |
| K-1173 | Kit, Repl. Wire Rope Aft | 1 | |
| K-1176 | Kit, Repl. Cradle Assy | 1 | |
| K-1187 | Kit, Repl. Thumb Screw | 2 | |
| K-1188 | Kit, Repl. Banner | 1 | |
| K-1191 | Kit, Repl. Thumb Screw | 1 | |
| K-1195 | Kit, Repl. Engagement Rod | 3 | |
| K-1200 | Kit, Repl. Axle Locking | 1 | |
| K-1201 | Kit, Repl. Axle Locking | 1 | |
| K-1202 | Kit, Repl. Sliding Pin | 3 | |
| K-1205 | Kit, Repl. Sliding Pin | 1 | |
| K-1208 | Kit, Repl. Fillwell, 6 | 1 | |
| K-1209 | Kit, Repl. Dump Tank | 4 | |
| K-1210 | Kit, Repl. 4 In Flange Adapter | 1 | |
| K-1220 | Kit, Repl. Sliding Pin | 1 | |
| K-1225 | Kit, Regulator | 5 | |
| K-1233 | Kit, Repl. 3 | 1 | |
| K-1245 | Kit, Repl. Valve Mtg. | 2 | |
| K-1246 | Kit, Repl. Drain Valve | 2 | |
| K-1249 | Kit, Repl. Pin | 1 | |
| K-1251 | Kit, Repl. Dump Tank | 1 | |
| K-1253 | Kit, Repl. Bearing / Seal | 1 | |
| K-1255 | Kit, Repl. Hub | 1 | |
| K-1256 | Kit, Repl. Fill Tank | 1 | |
| K-1263 | Kit, Repl. Pressure Gauge | 2 | |
| K-1271 | Kit, Repl. Bearing (Set) | 2 | |
| K-1279 | Kit, Repl. Sliding Pin | 1 | |
| K-1292 | Kit, Repl. Sliding Pin | 3 | |
| K-1294 | Kit, Repl. Sliding Pin | 1 | |
| K-1296 | Kit, Repl. Cradle Assembly (P) | 1 | |
| K-1299 | Kit, Repl. Fill Lid | 1 | |
| K-1301 | Kit, Repl. Release Spindle | 2 | |
| K-1302 | Kit, Repl. Beam And Link | 2 | |
| K-1303 | Kit, Repl. Piston/Cylinde | 2 | |
| K-1304 | Kit, Repl. Soft Goods | 3 | |
| K-1308 | Kit, Repl. Ball Loc Pin | 1 | |
| K-1309 | Kit, Repl. Seal | 1 | |
| K-1320 | Kit, Repl. Lever | 1 | |
| K-1337 | Kit, Repl. Ball Loc Pin | 1 | |
| K-1338 | Kit, Repl. Sliding Pin | 1 | |
| K-1347 | Kit, Repl. Sliding Pin | 1 | |
| K-1351 | Kit, Repl. Wear Sleeve | 1 | |
| K-1352 | Kit, Repl. Wear Sleeve | 2 | |
| K-1379 | Kit, Repl. Ax. Adapt (Set) | 1 | |
| K-1380 | Kit, Repl. Axle Lock Mech. | 1 | |
| K-1388 | Kit, Repl. Handle | 2 | |
| K-1390 | Kit, Repl.Dump Tank | 1 | |
| K-1401 | Kit, Repl. Ball Loc Pin | 1 | |
| K-1408 | Kit, Repl. Truck Assy | 1 | |
| K-1410 | Kit, Repl. Hose Assy | 4 | |
| K-1411 | Kit, Repl. Wand Assy | 5 | |
| K-1412 | Kit, Repl. Hose Assy | 1 | |
| K-1414 | Kit,Repl.Filter Ele. 4 | 9 | |
| K-1415 | Kit,Repl.Filter Ele. 4 | 6 | |
| K-1416 | Kit, Repl. Filter Ele. 8 | 4 | |
| K-1417 | Kit, Repl. Filter Ele. 8 | 7 | |
| K-1434 | Kit, Repl. Shock Assembly | 1 | |
| K-1435 | Kit, Repl Head (P) | 2 | |
| K-1438 | Kit, Repl. Ball Loc Pin | 1 | |
| K-1439 | Kit, Repl. Ball Loc Pin | 1 | |
| K-1442 | Kit, Repl. Act. Linkage | 1 | |
| K-1444 | Kit, Repl. Ax. Adapt (Set) | 1 | |
| K-1445 | Kit, Repl. Head Sub-Assy (P) | 2 | |
| K-1446 | Kit, Repl. Shear Bolt | 1 | |
| K-1447 | Kit, Repl. Bushing (Set) | 2 | |
| K-1460 | Kit, Repl. Shock Assembly | 1 | |
| K-1461 | Kit, Repl. Eyebolt | 3 | |
| K-1462 | Kit, Repl. Eyebolt | 1 | |
| K-1465 | Kit, Repl. Shock Assembly | 1 | |
| K-1472 | Kit, Repl. Swivel Caster | 1 | |
| K-1473 | Kit, Repl. Rigid Caster | 2 | |
| K-1475 | Kit, Repl. Fastener Assy | 1 | |
| K-1477 | Kit, Repl. Shaft Seal | 2 | |
| K-1478 | Kit, Repl. Bearing & Shaft | 2 | |
| K-1493 | Kit, Repl. Sliding Arm (P) | 2 | |
| K-1494 | Kit, Repl. Head Assembly (P) | 2 | |
| K-1499 | Kit, Pump Repair | 3 | |
| K-1502 | Kit, Repl. Hyd Cyl Seal | 1 | |
| K-1508 | Kit, Repl. Hyd Pump Seal | 3 | |
| K-1510 | Kit, Repl. O-Ring | 1 | |
| K-1512 | Kit, Repl. Shock/Shear | 2 | |
| K-1515 | Kit, Repl. Wheel Bracket | 2 | |
| K-1516 | Kit, Repl. Shock Assembly | 3 | |
| K-1517 | Kit, Repl. Shock/Shear | 1 | |
| K-1518 | Kit, Repl. Shock/Shear | 1 | |
| K-1519 | Kit, Repl. Shock/Shear | 1 | |
| K-1520 | Kit, Repl. Shock/Shear | 1 | |
| K-1521 | Kit, Repl. Shock/Shear | 1 | |
| K-1522 | Kit, Repl. Shock/Shear | 1 | |
| K-1523 | Kit, Repl. Shock/Shear | 2 | |
| K-1526 | Kit, Repl. Sleeve (Outer) | 2 | |
| K-1527 | Kit, Repl. Sleeve (Outer) | 1 | |
| K-1530 | Kit, Repl. Shear Tube | 1 | |
| K-1532 | Kit, Repl. Shear Tube | 1 | |
| K-1533 | Kit, Repl. Shear Tube | 1 | |
| K-1536 | Kit, Repl. Eyebolt | 2 | |
| K-1538 | Kit, Repl. Eyebolt | 2 | |
| K-1541 | Kit, Repl. Eyebolt | 5 | |
| K-1542 | Kit, Repl. Eyebolt | 1 | |
| K-1543 | Kit, Repl. Eyebolt | 1 | |
| K-1544 | Kit, Repl. Eyebolt | 1 | |
| K-1545 | Kit, Repl. Shear Bolt | 2 | |
| K-1546 | Kit, Repl. Shear Bolt | 1 | |
| K-1547 | Kit, Repl. Shear Bolt | 1 | |
| K-1549 | Kit, Repl. Wheel (Single) | 1 | |
| K-1550 | Kit, Repl. Wheel (Single) | 5 | |
| K-1554 | Kit, Repl. Wheel Bracket (P) | 3 | |
| K-1558 | Kit, Repl. Axle (P) | 3 | |
| K-1561 | Kit, Repl. Axle (P) | 3 | |
| K-1562 | Kit, Repl. Linkage | 2 | |
| K-1565 | Kit, Repl. Safety Catch | 1 | |
| K-1566 | Kit, Repl. Head Assembly (P) | 2 | |
| K-1567 | Kit, Repl. Head Assembly (P) | 1 | |
| K-1569 | Kit, Repl. Head Assembly (P) | 1 | |
| K-1570 | Kit, Repl. Head Assembly (P) | 1 | |
| K-1571 | Kit, Repl. Head Assembly | 1 | |
| K-1573 | Kit, Repl. Head Assembly (P) | 2 | |
| K-1574 | Kit, Repl. Head Assembly (P) | 1 | |
| K-1575 | Kit, Repl. Head Assembly (P) | 1 | |
| K-1576 | Kit, Repl. Head Assembly (P) | 1 | |
| K-1577 | Kit, Repl. Head Assembly (P) | 1 | |
| K-1584 | Kit, Repl. Head Assembly (P) | 1 | |
| K-1588 | Kit, Repl. Head Assembly (P) | 2 | |
| K-1589 | Kit, Repl. Head Assembly (P) | 1 | |
| K-1590 | Kit, Repl. Head Assembly (P) | 2 | |
| K-1591 | Kit, Repl. Head Assembly (P) | 1 | |
| K-1592 | Kit, Repl. Head Assembly (P) | 1 | |
| K-1599 | KIT, REPL. SLIDING PIN, | 1 | |
| K-1600 | Kit, Repl. Sliding Pin | 2 | |
| K-1603 | Kit, Repl. Handle (P) | 1 | |
| K-1604 | Kit, Repl. Handle (P) | 1 | |
| K-1608 | Kit, Repl. Bushing (Set) | 3 | |
| K-1612 | Kit, Repl. Actuator Linkag | 1 | |
| K-1621 | Kit, Repl. Desiccant | 4 | |
| K-1634 | Kit, Repl Turning Hub Seal | 1 | |
| K-1645 | Kit, Repl. Steering Hub | 1 | |
| K-1673 | Kit, Ballcage Repair | 1 | |
| K-1676 | Kit, Repl. Ax. Adapt (Set) | 2 | |
| K-1681 | Kit, Pump Repair | 1 | |
| K-1685 | Kit, Repair Fluid Seal | 2 | |
| K-1686 | Kit, Repair Air Seal | 2 | |
| K-1688 | Kit, Repl. Lid | 1 | |
| K-1691 | Kit, Repl. Pump | 1 | |
| K-1693 | Kit, Repl. Pump | 1 | |
| K-1695 | Kit, Repl. Shear Tube | 1 | |
| K-1697 | Kit, Repl. Shear Bolt | 2 | |
| K-1700 | Kit, Repl. Shear Bolt | 1 | |
| K-1702 | Kit, Repl. Pump | 2 | |
| K-1721 | KIT, REPL. SHEAR BOLT | 3 | |
| K-1728 | Kit, Rebuild Pump | 3 | |
| K-1730 | Kit, Repl. Pump | 1 | |
| K-1742 | Kit, Repl. Filter Element | 1 | |
| K-1743 | Kit, Repl. Filter Element | 1 | |
| K-175 | SEAL REPAIR KIT, MEYER JACK | 3 | |
| K-1752 | Kit, Pump Rebuild (Min) | 1 | |
| K-1753 | Kit, Pump Rebuild (Pe) | 1 | |
| K-1764 | Kit, Repl. External Hose | 1 | |
| K-1769 | Kit, Repl. Internal Hoses | 1 | |
| K-1771 | Kit, Repl. Ext. Hoses (Mb) | 1 | |
| K-1772 | Kit, Repl. Int. Hoses (Mb) | 1 | |
| K-1773 | Kit, Repl. Int. Hoses (Mb) | 1 | |
| K-1776 | Kit, Repl. Sliding Pin | 1 | |
| K-1777 | Kit, Repl. Pump Piston/Cyl | 3 | |
| K-1778 | Kit, Repl. Pump Piston/Cyl | 3 | |
| K-1779 | Kit, Repl. Seal For H-1029 | 1 | |
| K-1781 | Kit, Repl. Towbar (P) | 1 | |
| K-1785 | Kit, Repl. Gauge | 1 | |
| K-1789 | Kit, Repl. Head Assy (P) | 1 | |
| K-1791 | Kit, Repl. Hose Assy | 2 | |
| K-1793 | Kit, Repl. Wand Assy | 1 | |
| K-1798 | Kit, Repl. Cradle Assy. | 1 | |
| K-1805 | Kit, Repl. Hanger Assy | 1 | |
| K-1806 | Kit, Repl. Hanger Assy | 1 | |
| K-1807 | Kit, Repl. Strap Assy | 1 | |
| K-1808 | Kit, Repl. Strap Assy | 1 | |
| K-1809 | Kit, Repl. Con Rod | 1 | |
| K-1816 | Kit, Repl Adaptor | 1 | |
| K-1819 | Kit, Repl Front Conn | 1 | |
| K-1820 | Kit, Repl Engine Conn | 1 | |
| K-1821 | Kit, Repl Front Conn | 1 | |
| K-1822 | Kit, Repl Rear Conn | 1 | |
| K-1824 | Kit, Screw Stabilizer | 1 | |
| K-1827 | Kit, Repl Ball Lock Pin | 3 | |
| K-1861 | Kit, Repl Ext. Ctr. (P) | 1 | |
| K-1865 | Kit, Repl Ball Lock Pin | 1 | |
| K-1866 | Kit,Repl Mount Pad Adapter | 1 | |
| K-1867 | Kit, Repl Engine Mount Pad | 1 | |
| K-1879 | Kit, Repl Cradle Assy | 1 | |
| K-1882 | Kit, Repl Ball Lock Pin | 1 | |
| K-1896 | Kit, Repl. Engine Strap | 2 | |
| K-1897 | Kit, Repl. Engine Strap | 2 | |
| K-1900 | Kit, Repl. Pump Rel Screw | 1 | |
| K-1901-01 | Kit, Repl. Pump (Mb) | 4 | |
| K-1901-02 | Kit, Repl. Pump (Mb) | 3 | |
| K-1906 | Kit, Repl. Pump Pist./Seal | 2 | |
| K-1907 | Kit, Repl. Pump Rel. Screw | 1 | |
| K-1909 | Kit, Repl. Piston/Seal | 1 | |
| K-1914 | Kit, Repl. Pump (Phos) | 1 | |
| K-1920 | Kit, Repl. Cylinder Seal | 1 | |
| K-1923 | Kit, Repl. Cylinder Seal | 1 | |
| K-1924 | Kit, Repl. Cylinder Seal | 3 | |
| K-1926 | Kit, Repl. Pump Seal | 2 | |
| K-1927 | Kit, Repl. Cylinder Seal | 1 | |
| K-1931 | Kit, Repl. Reservoir | 1 | |
| K-1934 | Kit, Repl. Seal (Jack Ram) | 6 | |
| K-1936 | Kit, Repl. Pump Rel Screw | 2 | |
| K-1937 | Kit, Repl. Release Screw | 1 | |
| K-1938 | Kit, Repl. Locking Pin | 2 | |
| K-1939 | Kit, Repl. Pump Seal | 2 | |
| K-1949 | Kit, Repl. Pivot Bolt | 1 | |
| K-1950 | Kit, Repl. Shear Bolt | 1 | |
| K-1952 | Kit, Repl. Sliding Pin | 1 | |
| K-1957 | Kit, Repl. Shear Bolt Rad. | 1 | |
| K-1959 | Kit, Repl. Shear Bolt Ten. | 1 | |
| K-1964 | Kit, Repl. Shock Assembly | 1 | |
| K-1966 | Kit, Repl. Shock Assembly | 1 | |
| K-1984 | Kit, Repl. Release Screw | 1 | |
| K-1985 | Kit, Repl. Release Screw | 1 | |
| K-1987 | Kit, Repl. Pump (Mb) | 1 | |
| K-1988 | Kit, Repl. Pump Rel. Screw | 1 | |
| K-1990 | Kit, Repl. Wheel (Single) | 1 | |
| K-1991 | Kit, Repl. Pressure Gauge | 1 | |
| K-1993 | Kit, Repl. Fillwell | 1 | |
| K-200 | SEAL REPAIR KIT, MEYER JACK | 6 | |
| K-2008 | Kit, Repl. Engine Drive | 1 | |
| K-2009 | Kit, Repl. Hand Pump (Mb) | 1 | |
| K-2010 | Kit, Repl. Hand Pump (Pe) | 1 | |
| K-2047 | KIT, REPL. BALL LOC PIN | 1 | |
| K-2052 | KIT, REPL. BUSHINGS | 1 | |
| K-2106 | KIT, REGULATOR (LOW PRES) | 5 | |
| K-2107 | KIT, REGULATOR (HIGH PRES) | 3 | |
| K-2110 | KIT, ADAPTOR GARRET TPE331 | 3 | |
| K-2112 | Kit, Garrett Tfe731 Support (P) | 5 | |
| K-2139 | KIT, REPL SELECTOR VALVE | 1 | |
| K-2147 | KIT, CGA 580 FIXTURES | 3 | |
| K-2207 | KIT, CYLINDER SEAL REPLACEMENT | 2 | |
| K-2240 | KIT, SEAL REPLACEMENT | 1 | |
| K-2247 | KIT, BALL LOK REPL. | 3 | |
| K-2291 | KIT, REPL. SWIVEL CASTER | 1 | |
| K-2292 | KIT, REPL. FLOOR LOCK | 1 | |
| K-2293 | KIT, REPL. RIGID CASTER | 1 | |
| K-2304 | KIT, REPL. BALL LOK PIN | 4 | |
| K-2304 | KIT, BALL LOK-T REPLACEMENT. (MULTI-HEAD TOW BAR MODEL:01-1201-0010) | 4 | |
| K-2305 | KIT, REPL SLIDING PIN | 1 | |
| K-2306 | KIT, REPL. BEARING ASSEMBLY | 2 | |
| K-2376 | KIT, REPL BALL LOCK PIN | 1 | |
| K-2465-02 | KIT, PUMP REPLACEMENT | 1 | |
| K-2466-02 | KIT, PUMP REPLACEMENT | 1 | |
| K-2499 | KIT, CYLINDER SEAL REPL. | 4 | |
| K-2503 | KIT, REPL. PUMP SEAL | 1 | |
| K-2505 | KIT, REPL. SHEAR PIN | 6 | |
| K-2513 | KIT, SEAL REPAIR | 1 | |
| K-2540 | KIT, BEADBREAKER AIR PUMP (P) | 2 | |
| K-2589 | KIT, REPL. CYLINDER SEAL | 1 | |
| K-2606 | Kit, Replacement Cylinder Seal | 3 | |
| K-2625 | KIT, BALL LOK-T PIN REPLACEMENT, | 2 | |
| K-2665 | Kit, Replacement Cylinder Seal | 3 | |
| K-2700 | KIT, REPL. BALL LOCK PIN | 2 | |
| K-2741 | KIT, HI PRESS REG REPAIR | 2 | |
| K-2745 | KIT, HI PRESS REG REPAIR | 2 | |
| K-2779 | KIT, CYL. SEAL REPLACEMENT | 2 | |
| K-2782 | KIT, RELEASE SCREW | 1 | |
| K-2783 | KIT, RELEASE SCREW | 1 | |
| K-2784 | KIT, RELEASE SCREW | 2 | |
| K-2800 | KIT, CASTER REPLACEMENT | 3 | |
| K-2970 | KIT, REPL. BALL LOK-T PIN | 1 | |
| K-2988 | KIT, RELEASE SCREW | 3 | |
| K-3073 | KIT, REAR WHEEL | 1 | |
| K-3117 | KIT, RELEASE SCREW (PE) | 1 | |
| K-3151 | KIT, SMALL TIRE ADAPTER (P) | 3 | |
| K-3153 | KIT, HANDLE REPLACEMENT (P) | 1 | |
| K-3262 | KIT, LOW PRESS REG REPAIR | 2 | |
| K-3289 | KIT, CASTER REPLACEMENT | 3 | |
| K-3291 | KIT, REPL. CYLINDER SEALS | 2 | |
| K-3304 | KIT, JACK WELDMENT REPL. | 3 | |
| K-3333 | KIT, BLOW GUN REPLACEMENT | 3 | |
| K-3342 | KIT, INTERNAL PART REPL | 1 | |
| K-3343 | KIT, RELEASE SCREW REPL | 3 | |
| K-3441 | KIT, REPLACEMENT SEAL | 4 | |
| K-3444 | Kit, Seal Replacement | 1 | |
| K-3450 | KIT, CYLINDER REPL (P) | 2 | |
| K-3492 | KIT, REPL FILTER ELEMENT | 9 | |
| K-3493 | KIT, REPL FILTER ELEMENT | 4 | |
| K-3494 | KIT, REPL FILTER ELEMENT | 2 | |
| K-3524 | KIT, BALL LOK-T PIN REPL. | 1 | |
| K-3544 | KIT, REPL. PUMP SEALS | 1 | |
| K-3569 | KIT, SAFETY PIN REPLACEMENT | 1 | |
| K-3571 | KIT, CYLINDER PIN REPLACEMENT | 1 | |
| K-3572 | KIT, CYLINDER PIN REPL. | 1 | |
| K-3613 | KIT, REPL FILTER ELEMENT | 2 | |
| K-3614 | KIT, REPLACEMENT FILTER ELEMENT | 1 | |
| K-3615 | KIT, REPL FILTER ELEMENT | 1 | |
| K-3616 | KIT, REPL FILTER ELEMENT | 4 | |
| K-3630 | KIT, REPL, RESERVOIR (D) | 2 | |
| K-3688 | KIT, PUMP RETROFIT-REPLACEMENT | 3 | |
| K-3701 | KIT, REPLACEMENT CYLINDER | 3 | |
| K-3707 | KIT, REPL. HANDLE | 1 | |
| K-3721 | KIT, BEADBREAKER AIR PUMP (P) | 4 | |
| K-3733 | KIT, REPL. CYLINDER SEAL | 1 | |
| K-3751 | KIT, REPL FILTER ELEMENT | 4 | |
| K-3752 | KIT, REPL FILTER ELEMENT | 5 | |
| K-3782 | KIT, REPLACEMENT CRADLE ASS'Y | 1 | |
| K-3823 | KIT, SIGHTGAUGE REPAIR PE | 4 | |
| K-3852 | KIT, RELEASE SCREW | 1 | |
| K-3873 | KIT, SEAL REPLACEMENT | 2 | |
| K-3875 | KIT, PISTON/CYLINDER REPL | 1 | |
| K-3879 | KIT, RELEASE SCREW REPLACEMENT | 2 | |
| K-3886 | KIT, RELEASE SCREW | 2 | |
| K-3908 | KIT, AIR TANK RETROFIT (P) | 3 | |
| K-3917 | KIT, SIGHTGAUGE REPAIR (PE) | 1 | |
| K-3928 | KIT, FILTER REPLACEMENT | 1 | |
| K-3999 | Kit,Hand Pump Replacement | 1 | |
| K-4013 | KIT, 30 DEG THIN-HEAD WRENCH | 2 | |
| K-4026 | KIT, REPLACEMENT PUMP (P) | 1 | |
| K-4027 | KIT, RELEASE VALVE REPLACEMENT | 3 | |
| K-4028 | KIT, INTERNAL PARTS REPLACEMENT | 3 | |
| K-4029 | KIT, SEAL REPLACEMENT | 5 | |
| K-4047 | KIT, RELEASE SCREW REPLACEMENT | 1 | |
| K-4061 | KIT, PRE-PAID SKYDROL SAMPLE | 1 | |
| K-4083 | KIT, RELEASE VALVE | 1 | |
| K-4085 | KIT, SEAL REPLACEMENT | 3 | |
| K-4188 | KIT, SHEAR PIN REPLACEMENT | 3 | |
| K-4214 | KIT, RELEASE VALVE REPLACEMENT | 1 | |
| K-4215 | KIT, SEAL REPLACEMENT | 5 | |
| K-4216 | KIT, INTERNAL PARTS REPLACM'T | 1 | |
| K-4273 | KIT, REPL.FILTER ELE. 4 | 2 | |
| K-4276 | KIT,DIFFERENTIAL PRESSURE GAGE | 3 | |
| K-4285 | PARTS KIT,RECIPROCATING PUMP | 3 | |
| K-4291 | KIT, PUMP REPAIR | 1 | |
| K-4414 | KIT, REPLACEMENT PUMP (P) | 2 | |
| K-4500 | Kit, Engine Compressor Washer Adapter Eurocopter (with Turbomeca Arriel / Makila engines) | 4 | |
| K-4524 | KIT, REPLACEMENT AIR FILTER, | 1 | |
| K-4539 | KIT, SEAL REPLACEMENT | 3 | |
| K-4555 | KIT, REAR CASTER REPLACEMENT | 1 | |
| K-4556 | KIT, FRONT CASTER REPLACEMENT | 5 | |
| K-4588 | KIT, RAM ORING REPLACEMENT | 3 | |
| K-4735 | KIT, PW-150 ENGINE STRAP REPL | 6 | |
| K-4756 | KIT, CYLINDER SEAL REPLACEMENT | 2 | |
| K-4777 | KIT, RESERVOIR VENT | 1 | |
| K-4891 | KIT, STRAP REPLACEMENT | 3 | |
| K-4932 | KIT, PRESSURE MANIFOLD | 4 | |
| K-5036 | KIT, PRE-COOLER LIFT TOOL | 2 | |
| K1112 | KIT, REPL WHEEL | 5 | |
| K1414 | KIT, REPL. FILTER ELE. 4" MB | 9 | |
| K1608 | BUSHING: REPLACEMENT,SET KIT, | 3 | |
| K1686 | SEAL: AIR,REP KIT, | 2 | |
| K1938 | KIT, REPL. LOCKING PIN, | 2 | |
| K1AER002 | ETHER NDE KIT, AEROCHECK+, EDDY CURRENT PORTABLE FLAW DETECTOR | 1 | |
| K200 | MEYER HYDRAULICS K200 Hydraulic Repair Kit, For A-14, A-15, A334C, A340C Aircrafts Jacks | 6 | |
| K2147 | KIT, CGA 580 FIXTURES, | 3 | |
| K2606 | SEAL: REP,CYCLE,KIT, | 3 | |
| K2625 | KIT, BALL LOK-T PIN REPLACEMENT, | 2 | |
| K32008-1 | KIT, WRENCH, LANDING GEAR | 1 | |
| K32008-100 | KIT, WRENCH, LANDING GEAR | 1 | |
| K32008-131 | Kit, Wrench, Landing Gear | 8 | |
| K32008-132 | KIT, WRENCH, LANDING GEAR | 8 | |
| K32008-71 | KIT, WRENCH, LANDING GEAR | 3 | |
| K3450 | CYLINDER REPL,P,KIT, | 2 | |
| K3492 | KIT, FILTER ELEMENT PRESSURE | 9 | |
| K3493 | KIT, FILTER ELEMENT RETURN | 4 | |
| K3823 | GLASS REPAIR KIT, | 4 | |
| K4-162-162L | TOOL KIT,SCREW THREAD INSERT | 1 | |
| K4-258-258L | TOOL KIT, SCREW THREAD INSERT | 2 | |
| K4-314-314L | TOOL KIT, SCREW THREAD INSERT | 1 | |
| K4061 | KIT, PRE-PAID SKYDROL SAMPLE, | 1 | |
| K4177 | KIT, SABRELINER JP ADAPTER, | 1 | |
| K4285 | PUMP: REPLACEMENT,WC-1054 KIT, | 3 | |
| K50600-100 | PRESSURE COMPENSATOR ADJ KIT, | 2 | |
| K50660-100 | KIT, PRESSURE COMPENSATOR ADJ. | 1 | |
| K5166 | KIT, HPU BACKPRESSURE, | 2 | |
| K74D | KIT, RETAINER | 1 | |
| K78003-1 | Thrust reverser change kit，rr trent 1000 | 2 | |
| K78003-100 | Thrust reverser change kit，rr trent 1000 | 8 | |
| K78003-95 | Thrust reverser change kit，rr trent 1000 | 3 | |
| KC46 BORESCOPE KIT | EACH KIT SHALL CONSISTS OF THE FOLLOWING: 1. ONE (1) 3D VIDEOSCOPE BASE UNIT WITH BATTERIES (2) & CHARGER (SHALL INCLUDE: CASE AND MOUNT KIT, SHOULDER STRAP, MEMORY CARD, CARD READER, SCOPE HOLDER, AC ADAPTER, & WARRANTY) 2. ONE (1) MEASUREMENT VIDEOSCOP | 1 | |
| KD3999 | REPAIR KIT, MODEL 3999-010 | 1 | |
| KD651510 | KIT, REPLACEMENT | 1 | |
| KHC-1012 | COUPLING KIT, RESERVOIR SERVICE | 12 | |
| KHC-1468 | HYDRAULIC COUPLING KIT, REPLACEMENT (5830-BJ) | 3 | |
| KHC-2014 | COUPLING KIT, RESERVOIR SERVICE | 3 | |
| KHC-3558 | KIT, RESV. COUPLING HYDRAULIC | 3 | |
| KHC-3560 | KIT, COUPLING, HYDRAULIC RESERVOIR FILL | 4 | |
| KHC-3651 | KIT, RESERVOIR COUPLING | 3 | |
| KHC-3754 | COUPLING KIT, RESERVOIR SERVICE | 8 | |
| KHC-3779 | KIT, RESERVOIR FILL | 3 | |
| KHC-4001 | KIT, RESERVOIR COUPLING | 2 | |
| KHC1011 | KIT, COUPLING HYD. PRESSURE/ RETURN | 7 | |
| KHC1012 | KIT, HYD COUPLING RESERVOIR | 12 | |
| KIT PEOAVN-A03-PEL | TOOL KIT, HYDRAULIC REPAIRER | 1 | |
| KIT-PEOAVN-A03-VTB | TOOL KIT, HYDRAULIC REPAIRER | 1 | |
| KIT83-008-02E | KIT, TIRE PRESSURE SENSOR HAND HELD READER (120VAC) WITH CHARGER | 1 | |
| KIT83-008-03 | KIT, TIRE PRESSURE SENSOR HAND HELD READER (120VAC) WITH CHARGER | 8 | |
| KIT83-008-03E | KIT, TIRE PRESSURE SENSOR HAND HELD READER (120VAC) WITH CHARGER | 5 | |
| KIVAN001 | Kit, Vantage Eddy Current Flaw Detector | 1 | |
| KIWEL300TW | KIT, WELDCHECK3, WITH THUMBWHEEL, EDDY CURRENT PORTABLE FLAW DETECTOR | 1 | |
| KPLKATR72 | SESAME TECHNOLOGIES. INC. KPLKATR72 Lanyard Kit, Red, Kevlar, For ATR-72 Aircrafts | 2 | |
| KPLKATR72SP0T | Sesame Technologies KPLKATR72SP0T Lanyard Kit, With Pitot Cover, Red, Special Purpose On Top, For ATR 72 Aircrafts | 2 | |
| KPLKGV | Sesame Technologies KPLKGV Pitot Lanyard Kit, Gulfstream 500 Series | 1 | |
| LMN-731130PB401 | KIT, LEAP-1A FUEL NOZZLE REPLACEMENT | 1 | |
| LTCT12970-01 | Kit, Borescope | 1 | |
| LTCT12970-02 | Kit, Borescope (Guide Tubes Only) | 1 | |
| LTCT14808-01 | Kit, Wire Gage | 1 | |
| LTCT14808-02 | Kit, Wire Gage | 1 | |
| LTCT14808-03 | Kit, Wire Gage | 1 | |
| LTCT14808-04 | Kit, Wire Gage | 1 | |
| LTCT14808-05 | Kit, Wire Gage | 1 | |
| LTCT14808-06 | Kit, Wire Gage | 1 | |
| LTCT14808-07 | Kit, Wire Gage | 1 | |
| LTCT14808-08 | Kit, Wire Gage | 1 | |
| LTCT14808-09 | Kit, Wire Gage | 1 | |
| LTCT14808-10 | Kit, Wire Gage | 1 | |
| LTCT14808-11 | Kit, Wire Gage | 1 | |
| LTCT14808-12 | Kit, Wire Gage | 1 | |
| LTCT14808-13 | Kit, Wire Gage | 1 | |
| LTCT14808-14 | Kit, Wire Gage | 1 | |
| LTCT14808-15 | Kit, Wire Gage | 1 | |
| LTCT14808-16 | Kit, Wire Gage | 1 | |
| LTCT14808-17 | Kit, Wire Gage | 1 | |
| LTCT14808-18 | Kit, Wire Gage | 1 | |
| LTCT14808-19 | Kit, Wire Gage | 1 | |
| LTCT14808-20 | Kit, Wire Gage | 1 | |
| LTCT14808-21 | Kit, Wire Gage | 1 | |
| LTCT28960-01 | Kit, Temperature Probe | 1 | |
| LTCT4676 | REMOVAL KIT, NUT AND CONE | 1 | |
| LTCT4726 | REMOVAL KIT, TURBINE | 2 | |
| LTCT7286-01 | Kit, Transformer, Bore Heater Furnace | 1 | |
| LTCT7612-01 | Kit, Masking, Compressor First Stage Stator, RTV | 1 | |
| LTCT7675-01 | Kit, Carrier Locator Pins, Gage and Reaming | 1 | |
| LUB30-807 | GREASE GUN KIT,PNEUMATIC;|SNAPLOCK - PISTOL GREASE GUN; | 1 | |
| MA260005-1 | PLUG KIT, ENGINE FIRE EXTINGUISHER | 1 | |
| MA280006-47 | TOOL KIT, AERIAL REFUELING BOOM | 1 | |
| MA280006-52 | TOOL KIT, AERIAL REFUELING BOOM | 1 | |
| MA280058-1 | KIT, LEAK TEST, NEADS PRESSURE | 1 | |
| MIT161W1122 | MISCELLANEOUS TOOL - BUSHING REPLACEMENT AND HONING KIT, INNER CYLINDER, CENTER AXLE | 5 | |
| MIT311A1550 | MISCELLANEOUS TOOL - BEARING REPLACEMENT KIT, 737 THRUST REVERSER | 1 | |
| MK7ATIS-002 | INFLATION KIT, TYRE, W/STANDARD REACH HOSE | 6 | |
| MK7ATIS-002EL | INFLATION KIT, TYRE, W/LONG REACH HOSE | 3 | |
| MK7ATIS-003 | KIT, INFLATION TIRE | 1 | |
| MK932-001 | KIT, STRUT SEAL REM INST, BOX 1/2 | 1 | |
| MK932-002 | KIT, STRUT SEAL REM INST, BOX 2/2 | 1 | |
| MK932-003 | KIT, TIRE CHANGE, EMB | 1 | |
| MODEL 884FY-24 | ADAPTER KIT, 856NM 1/2 PITOT-STATIC TUBE PRESSURE TEST | 1 | |
| MODEL884FY-23 | ADAPTER KIT, PITOT-STATIC TUBE PRESSURE TEST. | 1 | |
| NCS67036 | KIT, LWR COWL DOOR, REMOV/INST | 4 | |
| NF40-1 | BREATHING AND VENTILATION KIT, FUEL CELL | 1 | |
| NYZ7000MDKIT | KIT, MASTIC REMOVAL, | 3 | |
| NYZ7007HD | HAND KIT, MASTIC REMALANT REMOVAL, ,MANUAL, 16 PC | 5 | |
| No. 196 | Kit, Starrett | 1 | |
| OCK-JT8D-2/4 | KIT, BORESCOPE | 1 | |
| OHME65B91889 | SLING - SPARE ENGINE CARRIAGE KIT, INLET NOSE DONUT, JT9D-3, -3A AND -7 | 1 | |
| OXI709SBK | BAG, KIT, C90 COMBINATION WRENCHES | 1 | |
| Olympus Mini Wheel Encoder (2.5m with D15 Connector) | Olympus Mini Wheel Encoder (2.5m with D15 Connector) - Bracket kit, Allen key screwdriver for bracket attachment, Carry case | 1 | |
| P 3402647-1 | LUBRICATION KIT, HAND HELD GREASE GUN | 1 | |
| P2K-ABF-02 | PMAT 2000 Kit, Airbus Core Image Software Parts Sig. Val. | 6 | |
| P31T-101 | ENGINE INLET PLUGS (American Aviation Ram Air Recovery Kit, curved bottom) (set of 2) | 1 | |
| PLTFRPSKT3000 | KIT, FIELD TUBE REPAIR | 2 | |
| PR5 | KIT, RETAINING RING | 1 | |
| PSV4612KIT | REMOTE VACUUM KIT, 6" SANDER | 1 | |
| PWA52661 | HARDWARE KIT, MECHAN | 1 | |
| PWA56075 | MAINTENANCE KIT, AIRCRAFT ENGINE FLEXIBLE BORESCOPE | 1 | |
| PWA75171 | KIT, LOCK STRAP - FAN ROTOR RESTRAINT | 1 | |
| PWC60718 | LEAK CK KIT, PRESS TEST | 5 | |
| PWC60786 | KIT, PRESSURE TEST | 3 | |
| PWC73013 | BORESCOPE KIT, FIBERSCOPE | 3 | |
| R-1354 | KIT, CYLINDER PIN REPLACEMENT | 1 | |
| RB6796941 | Seals Replacement Kit, Acc. Gear Box | 3 | |
| RB6796941-16 | KIT, SEAL REPLACEMENT | 2 | |
| RB6796941-17 | KIT, SEAL REPLACEMENT | 1 | |
| RB6796941-18 | KIT, SEAL REPLACEMENT | 2 | |
| RB6796941-19 | KIT, SEAL REPLACEMENT | 2 | |
| RB6796941-202 | KIT, SEAL REPLACEMENT | 3 | |
| RB6796941-203 | KIT, SEAL REPLACEMENT | 2 | |
| RBT6796941-201 | KIT, SEAL REPLACEMENT | 1 | |
| RBW109-3130-78-101 | TOOL KIT, 90° GEARBOX DRIVE SEAL REMOVAL/INSTALLATION | 2 | |
| RBW109-3130-85-133 | Tool Kit, Tail Rotor Pitch Control Shaft Bearing Remove/Install | 3 | |
| RBW109-3401- 69-137 | AW119 TOOL KIT, MAIN TRANSMISSION DRIVE INPUT SEAL REPLACEMENT | 1 | |
| RBW109-3401-69-137 | AW119 Tool Kit, Main Transmission Drive Input Seal Replacement | 1 | |
| RBW1805G01431-3G | AW139 Tool Kit, Mast Vibration Absorber Remove/Install | 1 | |
| RBW6000G00131-8G | PULLER KIT, M/R AND T/R UPPER CONICAL RING REM | 2 | |
| RBW6205G00331-3G | TOOL KIT, M/R BLADE RETENTION BOLT REM/INSTL | 2 | |
| RBW6205G19232-3G | TOOL KIT, M/R SCISSOR BUSHING REPL | 2 | |
| RBW6220G00631-8G | TOOL KIT, M/R FLANGED BUSHING REM/ INSTL | 2 | |
| RBW6230G02631-8G | TOOL KIT,M/R SCISSOR BUSHINGS REPL | 2 | |
| RBW6305G00132- 3G | TOOL KIT, GIMBAL/TORQUE TUBE BUSHINGS REPL. | 3 | |
| RBW6305G01331- 3G | TOOL KIT, MGB FREEWHEEL REPL. | 2 | |
| RBW6305G01531- 3G | TOOL KIT, MR DRIVE SEALS REP. | 2 | |
| RBW6305G01531-3G | TOOL KIT, M/R DRIVE SEAL REPLACEMENT | 2 | |
| RBW6305G02831-3G | Tool Kit, Main Gear Box Upper Fitting Replacement | 2 | |
| RBW6305G03531-3G | TOOL KIT, INPUT FLANGE/GIMBAL REPLACEMENT | 2 | |
| RBW6305G05833-3G | Tool Kit, Tail Rotor Drive Quill Ring Nut Remove Install | 2 | |
| RBW6305G25131-3G | TOOL KIT, INPUT PINION MATING RING REPLACEMENT | 2 | |
| RBW6320G14431-8G | TOOL KIT, T/R DRIVE QUILL RING NUT REM/INST | 2 | |
| RBW6405G04032-3G | TOOL KIT, T/R DUPLEX BEARING REM/INST | 2 | |
| RBW6405G08632-3G | TOOL KIT, T/R BUSHINGS REPLACEMENT. / DART | 2 | |
| RBW6430G00231-8G | TOOL KIT, T/R SLIDER BUSHING REPLACEMENT | 2 | |
| RBW6430G03331-8G | TOOL KIT, T/R DUPLEX BEARING REM/ INSTL | 2 | |
| RBW6430G04931-8G | TOOL KIT, T/R BUSHINGS REPLACEMENT | 2 | |
| RBW6505G00131-3T | TOOL KIT, IGB SEAL REPL | 2 | |
| RBW6505G00231-3T | TOOL KIT, TGB SEAL REPLACEMENT | 2 | |
| RBW6505G00331-3T | TOOL KIT, COMMON SEAL REPLACEMENT | 2 | |
| RBW6505G00431-3T | TOOL KIT, T.R.D. SUPPORT BEARING REPAIR | 3 | |
| RBWSTI3327 | TOOL KIT, SPECIAL WRENCHES | 2 | |
| RCSK8-02-004 | KIT, RYNGLOK TUBE REPAIR. INCLUDES ENERPAC HAND PUMP, CUTTING AND DEBURRING TOOLS. | 2 | |
| RRT062465 | ULTRASONIC INSPECTION CALIBRATION KIT, TRENT 1000 | 1 | |
| RST 3011 | HARDWARE KIT,SWAGING TOOL | 2 | |
| RTD48 | KIT, MASTER RETHREADING | 1 | |
| RTSK8-02-013 | FIELD REPAIR KIT, RYNGLOK. INCLUDES ENERPAC HAND PUMP. | 2 | |
| RZA11197 | KIT, ROSAN STUD REMOVER AND SETTER | 1 | |
| SATECH125FRV | FLEX HEAD REPAIR KIT,125 | 1 | |
| SC518099CLB06 | TOOL KIT, ELECTRICAL REPAI | 1 | |
| SCA-N2-KIT-BS341 | KIT, PRESSURE REGULATOR | 1 | |
| SCJN-KIT-400 | TEST KIT,PRESSURE;|FOAM LINED CARRYING CASE CONTAINING PRESSURE GAUGE 0-400 BAR DIGITAL READOUT,ADAPTOR M16 X 2.0 MALE TO M16 X 2.0 MALE,ADAPTOR 1/4 IN BSPP FEMALE TO M16 X 2.0 FEMALE,FLEXIBLE HOSE 1.5 METRES LONG M16 X 2.0 FEMALE CONNECTOR | 1 | |
| SDM400A | KIT, MASTER SCREWDRI | 2 | |
| SIC3500-001 | KIT, INFLATION TIRE | 8 | |
| SK31046-11 | REPAIR KIT, LAG DAMPER BRACKET OVERSIZED BUSHING | 1 | |
| SK33330-018 | REPAIR KIT, LAG DAMPER BRACKET OVERSIZED BUSHING NSN# 5220-01-462-1741 | 1 | |
| SPL-4133 | WRENCH KIT, MLG AND NLG | 1 | |
| SPL-8445 | KIT, WRENCH, LANDING GEAR | 1 | |
| ST2580-163A | WRENCH - KIT, ANTI-RATTLE | 11 | |
| ST2580-334C-1-145 | WRENCH - KIT, ANTI-RATTLE | 12 | |
| ST2580-334C-1-185 | WRENCH - KIT, ANTI-RATTLE | 12 | |
| ST879A1 | TOOL KIT, HAND PRESETTING, FLARELESS TUBE FITTINGS | 1 | |
| ST928C-KIT | FULL KIT, BEARING REMOVAL TOOLS | 1 | |
| STI3113 | TOOL KIT, SPECIAL WRENCHES (GJ-19-00) | 1 | |
| STI3327 | TOOL KIT, SPECIAL WRENCHES | 1 | |
| STL3327 | TOOL KIT, SPECIAL WRENCHES | 1 | |
| StereoMeasurement Tip adaptors | BORESCOPE KIT, VIDEO PROBE | 1 | |
| T100965 | WRENCH KIT,POWER | 1 | |
| TA03318 | TOOL KIT, REGULATOR ADJUSTING | 1 | |
| TCK1827BBR | KIT, TOOL CONTROL, BLACK/RED 18X27 | 1 | |
| TCK3627BBRA | KIT, TOOL CONTROL, BLACK/RED 18X27 | 1 | |
| TEKIT-2011 | North Boeing Field & Renton Pencil Probe Kit, Includes; PENFLX903-8, PENFLX-8, PENFLX95-7, PEN-4, PEN92-5B, PEN92-4B, BL445-6, BL045-6, PEN45-6/2M, PEN45-5, PEN95-3, PENU95-6/2M, TPEND95-6, BNC-P2D | 1 | |
| TEKIT-2016 | Eddy Current Pencil Probe Kit, Includes; PEN-6, PEN-6/2M, PEN95-6, PEN95-6/2M,..PEN45-6, PEN45-6/2M, PEN95-6B, PEN95-6B/2M, PENU-6, PENU-6/2M, BN-M6, RS0824-4340, -7075T6, -6AL4V, -304, Teflon Tape and Pelican Case | 1 | |
| TEKIT-6206 | Window Repair Kit, Includes TEK-6203, TEK-6204, TEK-6205,TEK-6026. TC-5010T-1, TC505T-1, BM-M6 Cable, Pelician 1500 Kit Box | 1 | |
| TLFKIT-104 | Low Frequency Kit, SDP.7-10K, RDP.8-50H, SB.5-1K, RB.6-500H, with cable, Pelican 1150 | 1 | |
| TM2814G001 | SPRAY KIT,SELF PRESSURIZED | 2 | |
| TMY20-20-302 | WRENCH KIT, WIGGINGS COUPLINGS | 2 | |
| TP176RV | KIT, SHEETMETAL REPA | 1 | |
| TSF35T-12001-5 | TEST SUPPORT FIXTURE TEST KIT, CREW OXYGEN SYS | 1 | |
| TSFFT1U2820-19 | KIT, TEST SUPPORT FIXTURE, NGS SYSTEM, BAC | 2 | |
| TTC75002 | KIT, TORQUE SCREWDRI | 1 | |
| TTL-300-DTI-HA | KIT, 0-300 PSI TIRE SERVICE | 2 | |
| TZ-6368 | CONNECTOR REPAIR KIT, INSERT/REMOVAL | 14 | |
| Tip adaptors for above scopes | BORESCOPE KIT, VIDEO PROBE | 1 | |
| UC1KIT-114 | Universal 100 Degree Countersink Probe Kit, 14 probes from .125" to .750", 100KHz-2MHz, Shielded, Pelican Case | 1 | |
| XLG3-620A | BORESCOPE KIT, VIDEO PROBE | 1 | |
| YA7500 | KIT, GREASE NOZZLE | 8 | |
| Z-5899-1 | Kit, Air Pump Replacement | 3 | |
| 3G6520G00132 | TOOL KIT, TGB/IGB SEALS REPLACEMENT | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
