| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 6796746 | JIG - DRILL | 1 | |
| 6798789 | JIG - DRILL | 1 | |
| 6872273 | JIG - DRILL | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 04-518-J | NUT PLATE DRILL JIGS ( A' DIMENSION: .344" )( B' DIMENSION: - )( BOLT SIZE: #10 )( DRILL SIZE: #40 )( PILOT DIAMETER: .191" )( TYPE: ONE LUG TYPE STYLE 1 ) | 1 | |
| 04-518-NA | NUTPLATE DRILL JIG-2 LUG TYPE #4 A=.203 B=.406 C=.112 D=#40 | 1 | |
| 04-518-NB | NUTPLATE DRILL JIG-2 LUG TYPE #6 A=.218 B=.436 C=.139 D=#40 | 1 | |
| 04-518-NC | NUTPLATE DRILL JIG-2 LUG TYPE #8 A=.234 B=.468 C=.164 D=#40 | 1 | |
| 04-518-ND | NUTPLATE DRILL JIG-2 LUG TYPE #10 A=.250 B=.500 C=.191 D=#40 | 1 | |
| 04-518-NF | NUTPLATE DRILL JIG-2 LUG TYPE 5/16"A=.3125B=.625C=.312D=#30 | 1 | |
| 04-518-PA | NUTPLATE DRILL JIG-1 LUG TYPE #4 A=.203 C=.112 D=#40 | 1 | |
| 04-518-PD | NUT PLATE DRILL JIGS ( A' DIMENSION: .250" )( B' DIMENSION: - )( BOLT SIZE: #10 )( DRILL SIZE: #40 )( PILOT DIAMETER: .191" )( TYPE: ONE LUG TYPE STYLE 2 ) | 1 | |
| 04-518-T | NUT PLATE DRILL JIGS ( A' DIMENSION: .344" )( B' DIMENSION: - )( BOLT SIZE: #10 )( DRILL SIZE: #40 )( PILOT DIAMETER: .191" )( TYPE: CORNER TYPE STYLE 1 ) | 1 | |
| 04-518-TA | NUTPLATE DRILL JIG-ANCHOR | 1 | |
| 2C5619G01 | DRILL JIG - SPINNER BOLT | 1 | |
| 6795907 | Jig-Drill | 1 | |
| 6796090 | DRILL - JIG - COMPRESSOR | 1 | |
| 6796091 | DRILL JIG - COMPRESSOR ROTOR | 1 | |
| 6796092 | DRILL - JIG - TURBINE | 1 | |
| 6796093 | DRILL - JIG - TURBINE | 1 | |
| 6797064 | DRILL JIG - COMP ROTOR 14TH STAGE | 1 | |
| 6797066 | DRILL JIG - COMP ROTOR 4TH STAGE | 1 | |
| 6797181 | DRILL JIG - TURB COUPLING | 1 | |
| 6797898 | JIG - DRILL, SCREW THREAD INSERT LOCKPIN | 1 | |
| 6798051 | JIG--DRILL, PRESSURE OIL PUMP BODY BUSHING PIN | 1 | |
| 6798052 | JIG--DRILL, SCAVENGE OIL PUMP COVER BUSHING PIN | 1 | |
| 6799863 | JIG - DRILL AND DRIVER, DRAIN PLUG INSERT LOCKPIN HOLE | 1 | |
| 6872628 | JIG - DRILL , TURBINE 2ND STAGE NOZZLE | 1 | |
| 6872983 | JIG - DRILL, PWR TURB | 1 | |
| 6872986 | JIG - DRILL, GAS PROD TURB SUP ASSY | 1 | |
| 6898418 | JIG--DRILL, MAGNETIC PLUG INSERT DRILLS THE PIN HOLE IN THE MAG DRAIN PLUG AND GEARBOX CASE. | 1 | |
| 23002244 | Jig-Drill, Housing Assy, Reduction Gear | 1 | |
| 98A54503002000 | DRILLING-JIG | 1 | |
| 98A54503003000 | DRILLING-JIG | 1 | |
| A54002 | DRILL JIG-SIDE LINK,NACELLE STRUT | 1 | |
| A54002-19 | DRILL JIG - SIDE LINK, NACELLE STRUT | 1 | |
| A54002-9 | DRILL JIG - SIDE LINK, NACELLE STRUT | 6 | |
| AGE-01307-401 | JIG - DRILLING, PILOT SEAT TRACK INSTALLA-TION | 6 | |
| ATI518-ML | NUT PLATE DRILL JIG-CWS | 1 | |
| ATI518-RX | NUT PLATE DRILL JIG-SWS | 1 | |
| ATI518A | NUT PLATE DRILL JIG-DWS | 2 | |
| ATI518AD | NUT PLATE DRILL JIG-DWS | 1 | |
| ATI518AE | NUT PLATE DRILL JIG-DWS | 1 | |
| ATI518B | NUT PLATE DRILL JIG-DWS | 1 | |
| ATI518C | NUT PLATE DRILL JIG-DWS | 1 | |
| ATI518D | NUT PLATE DRILL JIG-DWS | 1 | |
| ATI518E | NUT PLATE DRILL JIG-DWS | 1 | |
| ATI518F | NUT PLATE DRILL JIG-DWS | 1 | |
| ATI518G | NUT PLATE DRILL JIG-SWS | 1 | |
| ATI518GL | NUT PLATE DRILL JIG-DWS | 1 | |
| ATI518GP | NUT PLATE DRILL JIG-DWS | 1 | |
| ATI518GT | NUT PLATE DRILL JIG-DWS | 1 | |
| ATI518H | NUT PLATE DRILL JIG-SWS | 1 | |
| ATI518HO | NUT PLATE DRILL JIG-DWS | 1 | |
| ATI518HT | NUT PLATE DRILL JIG-DWS | 1 | |
| ATI518J | NUT PLATE DRILL JIG-SWS | 1 | |
| ATI518K | NUT PLATE DRILL JIG-SWS | 1 | |
| ATI518KD | NUT PLATE DRILL JIG-DWS | 1 | |
| ATI518KE | NUT PLATE DRILL JIG-DWS | 1 | |
| ATI518KL | NUT PLATE DRILL JIG-DWS | 1 | |
| ATI518KN | NUT PLATE DRILL JIG-DWS | 1 | |
| ATI518KU | NUT PLATE DRILL JIG-DWS | 1 | |
| ATI518M | NUT PLATE DRILL JIG-DWS | 1 | |
| ATI518ME | NUT PLATE DRILL JIG-CWS | 1 | |
| ATI518MN | NUT PLATE DRILL JIG-CWS | 1 | |
| ATI518N | NUT PLATE DRILL JIG-DWS | 1 | |
| ATI518NA | NUT PLATE DRILL JIG-DWS | 1 | |
| ATI518NASDA8 | NUT PLATE DRILL JIG-SLM | 1 | |
| ATI518NB | NUT PLATE DRILL JIG-DWS | 1 | |
| ATI518NC | NUT PLATE DRILL JIG-DWS | 1 | |
| ATI518ND | NUT PLATE DRILL JIG-DWS | 2 | |
| ATI518NE | NUT PLATE DRILL JIG-DWS | 3 | |
| ATI518NJ | NUT PLATE DRILL JIG-DWS | 1 | |
| ATI518PA | NUT PLATE DRILL JIG-SWS | 1 | |
| ATI518PB | NUT PLATE DRILL JIG-SWS | 2 | |
| ATI518PC | NUT PLATE DRILL JIG-SWS | 1 | |
| ATI518PD | NUT PLATE DRILL JIG-SWS | 1 | |
| ATI518PE | NUT PLATE DRILL JIG-SWS | 1 | |
| ATI518RC | NUT PLATE DRILL JIG-SWS | 1 | |
| ATI518RF | NUT PLATE DRILL JIG-SWS | 1 | |
| ATI518RM | NUT PLATE DRILL JIG-SWS | 1 | |
| ATI518RO | NUT PLATE DRILL JIG-SWS | 1 | |
| ATI518RP | NUT PLATE DRILL JIG-SWS | 1 | |
| ATI518S | NUT PLATE DRILL JIG-CORNER | 1 | |
| ATI518SA | NUT PLATE DRILL JIG-CORNER | 1 | |
| ATI518SB | NUT PLATE DRILL JIG-CORNER | 1 | |
| ATI518SC | NUT PLATE DRILL JIG-CORNER | 1 | |
| ATI518SD | NUT PLATE DRILL JIG-CORNER | 1 | |
| ATI518SE | NUT PLATE DRILL JIG-CORNER | 1 | |
| ATI518SP1049 | NUT PLATE DRILL JIG - TWO LUG | 1 | |
| ATI518SP1062 | NUT PLATE DRILL JIG-DWS | 1 | |
| ATI518T | NUT PLATE DRILL JIG-CORNER | 1 | |
| ATI518TA | NUT PLATE DRILL JIG-MINIATURE | 1 | |
| ATI518TB | NUT PLATE DRILL JIG-MINIATURE | 1 | |
| ATI518U | NUT PLATE DRILL JIG-CORNER | 1 | |
| B32060 | DRILL JIG -0 AXLE | 1 | |
| B32060-1 | DRILL JIG - AXLE SLEEVE | 3 | |
| B54007 | DRILL JIG -0 NACELLE SIDE LINK | 1 | |
| B54007-1 | DRILL JIG - NACELLE SIDE LINK | 2 | |
| B54010 | DRILL JIG -0 NACELLE DIAGONAL BRACE-RB211 | 1 | |
| B54010-30 | DRILL JIG - NACELLE DIAGONAL BRACE, RB211-535 | 2 | |
| B54010-30-M | DRILL JIG-NACELLE DIAGONAL | 1 | |
| B54011 | DRILL JIG -0 NACELLE DIAGONAL BRACE-PW2000 | 1 | |
| B54011-1 | DRILL JIG - NACELLE DIAGONAL BRACE, PW2000 | 2 | |
| B54011-1-M | DRILL JIG-NACELLE | 1 | |
| BAT-MTE-1 | Safety Wire Drill Jig AERO-SafTblok | 1 | |
| C78043-1 | DRILL JIG - HEAT SHIELD, AFT FAIRING | 1 | |
| CDKB737-400 | AET737-11 FLOOR BEAM SUPPORT TOOLING,-12 CARGO DOOR LOWER JAMB TOOLING,-13 CARGO DOOR UPPER JAMB TOOLING, -14 CARGO DOOR LATCH JIG, -51 CDK DRILL TEMPLATE KIT | 1 | |
| CF3471042-TK1 | KIT (CONTAINS PN 228-50939-801-34/1, DRILLING JIG) | 2 | |
| CHA723-640 | DRILL JIG1-4 | 1 | |
| CJ5787-1E | JIG-DRILL | 1 | |
| D202-38E930 | JIG-DRILLING | 1 | |
| DJ113T1292 | DRILL JIG - DOOR DRIVE INBD SUPPORT | 1 | |
| DJ65B04957 | DRILL JIG - LATCH TORQUE TUBE TUBE CRANK | 1 | |
| DJ65B05025 | DRILL JIG - TORQUE TUBE CRANKS | 1 | |
| DJ65B05025-M | DRILL JIG-TORQUE TUBE | 1 | |
| EX-92644 | JIG-DRILL, PINION REAR BEARING OIL JET | 2 | |
| Ex-69230 | Jig-drill, speed sensitive valve bearing cage | 1 | |
| Ex-71583 | Jig-drill, compressor expresser extension, shaft b | 1 | |
| Ex-71585 | Jig-drill, turbine front bearing cage lock pin hol | 1 | |
| Ex-74969 | Jig-drill, pinion gear oil jet | 2 | |
| Ex-74974 | Jig-drill, turbine coupling shaft | 1 | |
| Ex-74999 | Jig-drill, turbine coupling shaft | 1 | |
| Ex-92644 | Jig-drill, pinion rear bearing oil jet | 2 | |
| Ex-92645 | Jig-drill, bearing cage | 1 | |
| F28382000 | JIG JIG-DRILLING | 1 | |
| F70179 | DRILL JIG ASSY -0 FLAP TRACK & SPOILER TO LOCATE | 1 | |
| F70179-1 | DRILL JIG -0 FLAP TRACK | 1 | |
| F70189 | DRILL JIG KIT -0 NOSE GEAR DRAG BRACE LOCATE AND | 1 | |
| F71279 | JIG ASSY -0 MLG SNUBBER DRILL USED ON MLG | 1 | |
| F80181-1 | Drill Jig -Aileron Trim Input Shaft | 1 | |
| G52018 | DRILL JIG EQPT -0 DOOR LATCH TORQUE TUBES | 1 | |
| G52018-1 | DRILL JIG EQUIPMENT - DOOR LATCH TORQUE TUBES | 1 | |
| GSE 364 | JIG-DRILLING, PILOT SEAT TRACK INSTL | 1 | |
| J71076-1 | Drill jig assemblies-inlet | 1 | |
| J71076-18 | DRILL JIG ASSEMBLIES - INLET | 1 | |
| J71076-26 | Drill jig assemblies-inlet | 1 | |
| K21021-1 | DRILL JIG - HEATER LIP, CABIN AIR COMPRESSOR (CAC) INLET | 4 | |
| MIT313A6800 | DRILL JIG - TOOL | 2 | |
| PWC30916 | drill jig - Pratt & Whitney Canada | 3 | |
| PWC50057 | drill jig - Pratt & Whitney Canada | 7 | |
| RB6798051 | JIG--DRILL, PRESSURE OIL PUMP BODY BUSHING PIN | 2 | |
| RB6798052 | JIG--DRILL, SCAVENGE OIL PUMP COVER BUSHING PIN | 2 | |
| RB6898418 | JIG--DRILL, MAGNETIC PLUG INSERT DRILLS THE PIN HOLE IN THE MAG DRAIN PLUG AND GEARBOX CASE. | 2 | |
| TUBE-DRILL-JIG1 | TUBE DRILL JIG-3/32">1/4" | 1 | 1/4\"','Pa141','has been added to your tool request. Feel free to search for more tools before submitting your Tool Request. After you have added all of your tools, click on "Tool Request" in the main menu at the top of the page.','has already been added to your tool request. To update the quantity please go to the Tool Request page by clicking on "Tool Request" in the main menu at the top of the page. Otherwise, please feel free to search for more tools before continuing on to the Tool Request.');"> |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
