| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 12A3402-5 | JACK ASSEMBLY | 1 | |
| 460004607 | JACK ASSEMBLY | 1 | |
| 460007322 | JACK ASSEMBLY | 1 | |
| A32032-17 | JACK ASSEMBLY | 3 | |
| C78009-34 | JACK ASSEMBLY | 3 | |
| F73001-1 | Jack Assembly | 1 | |
| F73001-101 | Jack Assembly | 1 | |
| F73001-103 | JACK ASSEMBLY | 1 | |
| G0705G00232 | JACK ASSEMBLY | 1 | |
| G27043-185 | Jack Assembly | 1 | |
| GB900-315-060 | JACK ASSEMBLY | 1 | |
| J20009-38 | JACK ASSEMBLY | 3 | |
| PT73001-101 | JACK ASSEMBLY | 1 | |
| W-429-15A | JACK ASSEMBLY | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 98L07104005000 | TOOL JACKING TOOL ASSEMBLY PRIMARY S (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J20009-110 | JACK ASSEMBLY - HYDRAULIC (CALIBRATION) (CALIBRATION) | 1 | |
| 02-7847-0100 | Assembly, 25 Ton Axle Jack | 1 | |
| 02-7918C9100 | JACK ASSEMBLY, SINGLE AXLE | 4 | |
| 02-7924C0100 | JACK: AXLE,HYD,3STG,ASSEMBLY, | 2 | |
| 109-3900-89-101 | JACK AND ADOPTER ASSEMBLY | 1 | |
| 1159GSE50214-3 | JACK PAD ASSEMBLY - WING L/H | 4 | |
| 1159SEM20008-1 | WING JACK PAD ASSEMBLY (LEFT HAND) | 3 | |
| 1159SEM20008-10 | WING JACK PAD ASSEMBLY RIGHT HAND | 2 | |
| 1159SEM20008-2 | WING JACK PAD ASSEMBLY (RIGHT HAND) | 4 | |
| 1159SEM20008-9 | WING JACK PAD ASSEMBLY LEFT HAND | 2 | |
| 1159SEM20052-1 | FORWARD FUSELAGE JACK PAD ASSEMBLY | 1 | |
| 159SEM30001-3 | MAIN LANDING GEAR JACK PAD ASSEMBLY | 1 | |
| 1691A0000-01 | MLG JACKING DOME ASSEMBLY | 1 | |
| 16A13200L1-1 | JACKING ADAPTER ASSEMBLY | 1 | |
| 190E2G0004 | JACK SCREW ASSEMBLY HSTA | 2 | |
| 1C8333 | JACK ASSEMBLY, SUPPORT | 1 | |
| 1C8333G01 | JACK ASSEMBLY, SUPPORT COMPRESSOR REAR FRAME | 1 | |
| 1C8333G02 | ASSEMBLY, SUPPORT JACK | 1 | |
| 1C9376G01 | Jack Assembly, CRF Support | 1 | |
| 1C9447 | JACK ASSEMBLY, SUPPORT COMPRESSOR | 1 | |
| 1C9447G01 | CRF JACK ASSEMBLY, SUPPORT | 1 | |
| 298487 | Screw, Jack Assembly | 1 | |
| 23055737 | Jack and Guide – LP Turbine Assembly, Forward Shaft | 1 | |
| 2AJ65B80552 | ASSEMBLY JIG SHAFT - DIFFERENTIAL, STABILIZER JACKSCREW | 1 | |
| 30MIT65B00112 | ADAPTER ASSEMBLY - JACKING, OUTBOARD WING BBL 932.6 | 10 | |
| 347328 | pad Assembly ( Main jack ) | 1 | |
| 36888709 | JACK ASSEMBLY MC J JACK | 1 | |
| 3CF65B80552 | CHECK FIXTURE - STABILIZER JACKSCREW DIFFERENTIAL ASSEMBLY, BACKLASH | 1 | |
| 3MIT65B00162 | Lock Assembly -Nose Gear Mooring/Jacking | 5 | |
| 45A99147-001 | JACK PAD ASSEMBLY | 4 | |
| 460004607 | ASSEMBLY JACK TOOL | 1 | |
| 460007060 | SCREWJACK ASSEMBLY | 1 | |
| 4600067060 | SCREW JACK ASSEMBLY | 1 | |
| 4916701-1 | FUSULAGE JACK ADAPTER ASSEMBLY | 9 | |
| 4916702-501 | Adapter Assembly Jack Wing | 10 | |
| 50MIT65B00112 | ADAPTER ASSEMBLY - AIRCRAFT JACKING WBL 585 | 9 | |
| 51180-50 | JET STARTER HOSE AND LENO WEAVE SCUFFER JACKET ASSEMBLY 50 FT | 1 | |
| 53D22004 | 10 TON AXLE JACK ASSEMBLY | 2 | |
| 55A6309 | JACK MANIFOLD ASSEMBLY | 1 | |
| 60G5152001A001 | NOSE JACK PAD ASSEMBLY | 2 | |
| 60G5710102A006 | RH JACK PAD ASSEMBLY | 2 | |
| 60MIT65B00112 | JACKING ADAPTER ASSEMBLY - OUTBOARD WING WBL 938.8 | 1 | |
| 6263-6304 | ASSEMBLY JACKET | 1 | |
| 638-10791-1 | IRDS Receiver - Converter Jacking Assembly | 1 | |
| 638-10791-10 | IRDS Receiver - Converter Jacking Assembly | 1 | |
| 638-10791-3 | IRDS Receiver - Converter Jacking Assembly | 1 | |
| 638-10791-9 | IRDS Receiver - Converter Jacking Assembly | 1 | |
| 65J33607 | JACK ASSEMBLY 35TON CAPACITY | 1 | |
| 67A96D1-1 | AIRCRAFT JACK TESTER ASSEMBLY | 3 | |
| 7-367310005-605 | JACK STAND ASSEMBLY | 1 | |
| 856A1130P12 | SET - TOOL, JACKSCREW, ENGINE DISASSEMBLY | 10 | |
| 856A3576G02 | SET - TOOL, JACKSCREW, ENGINE DISASSEMBLY | 17 | |
| 8721PK | CYLINDER ASSEMBLY REPAIR PARTS KIT- MALABAR NOSE TRIPOD JACK | 1 | |
| 8782PK | CYLINDER ASSEMBLY REPAIR PART KITS-35 TONS AXLE JACK | 1 | |
| 90MIT65B00112 | ADAPTER ASSEMBLY - JACKING INBOARD WING, BBL 566.5 | 2 | |
| 930002 | JACK ASSEMBLY HYDRAULIC | 9 | |
| 98D07104000101 | JACK PAD ASSEMBLY | 3 | |
| 98L07104005000 | JACKING TOOL ASSEMBLY PRIMARY SPIGOT | 2 | |
| 98L07104006000 | JACKING TOOL ASSEMBLY SECONDARY SPIGOT | 1 | |
| 98L52403000000 | JACK COMPRESS ASSEMBLY | 1 | |
| AGE-04511-401 | ADAPTER: JACK,SS,ASSEMBLY, | 2 | |
| AJ65B80552 | ASSEMBLY JIG - DIFFERENTIAL ASSEMBLY, STABILIZER JACKSCREW | 1 | |
| B27011-62 | FRAME ASSEMBLY - FOR EQUIP HANDLING JACKSCREW | 4 | |
| B27011-71 | TRUNNION ASSEMBLY - HORIZ. STAB. JACKSCREW INST/REM | 6 | |
| B27034-1 | LOAD ASSEMBLY - JACKSCREW BACKLASH, HORIZ. STABILIZER (B27034-6 INCLUDED IN B27034-1 EQPT) (GDC10130) | 11 | |
| B27034-6 | LOAD ASSEMBLY-JACKSCREW BACKLASH,HORIZ .STABILIZER INCUDED IN B27034-1 | 6 | |
| B809-5300 | JACK FOR MLG WHEEL ASSEMBLY  CHANGE | 1 | |
| C07002-1 | ADAPTER ASSEMBLY, WING JACKING | 30 | |
| C32037-5 | Jackball Pin Assembly | 1 | |
| C32045-56 | Jack Support Assembly | 1 | |
| C78009-40 | JACK ADAPTER ASSEMBLY | 1 | |
| C78009-73 | JACK ADAPTER ASSEMBLY | 1 | |
| CAA328BP | CYLINDER: JACK,A328B,ST,ASSEMBLY, | 2 | |
| CATTJ3P | CYLINDER: W/O HOSE,ASSEMBLY, FITS JACK MODEL TTJ3 | 2 | |
| CJ67D0250-1 | 15 TON AXLE JACK ASSEMBLY | 4 | |
| CP30428-1 | JACK ASSEMBLY - TRANSIT STAND RB211-535 | 1 | |
| CP30428/1 | JACK ASSEMBLY - TRANSIT STAND RB211-535 | 1 | |
| DA1321018-103 | MAIN LANDING GEAR JACK PAD ASSEMBLY | 1 | |
| DGSAJA-1S-101 | MAIN LANDING GEAR JACK PAD ASSEMBLY | 1 | |
| DRT68165 | JACK-SCREW, ASSEMBLY | 1 | |
| F52238 | JACK ASSEMBLY -0 STABILIZER SUPPORT INSERTED | 1 | |
| F70057-500 | Support assembly-stabilizer jack screw | 1 | |
| F70333-24 | Adapter Assembly & Jack | 12 | |
| F71138-501 | Adapter assembly aircraft jacking point | 1 | |
| F72703 | JACK ASSEMBLY -0 STABILIZER SUPPORT JACK ASSY | 1 | |
| F72703-1 | Jack assembly stabilizer support | 1 | |
| F72703-500 | Jack assembly stabilizer support | 4 | |
| F72711 | JACK PAD ASSEMBLY -0 AFT BODY USED TO PROVIDE AN | 2 | |
| F72711-9 | Jack Pad Assembly | 6 | |
| F72843 | SUPPORT ASSEMBLY -0 STABILIZING JACK TO | 1 | |
| F72924-1 | Holder - Stabilizer Trim Jackscrew Ballnut and Screw Assembly | 9 | |
| F80000-6 | ADAPTER ASSEMBLY AIRCRAFT JACKING | 1 | |
| F80000-7 | ADAPTER ASSEMBLY -AIRCRAFT JACKING -FORWARD | 24 | |
| F80014-2 | Stabilizer Jackscrew - Bar Assembly | 13 | |
| F80068-1 | SUPPORT ASSEMBLY - AFT FUSELAGE JACKING POINT | 5 | |
| F80068-27 | Support Assembly -Aft Fuselage Jacking Point | 1 | |
| G07002-1 | JACKING BAR ASSEMBLY - MAIN LANDING GEAR AXLE | 3 | |
| G07005-1 | ADAPTER ASSEMBLY, AIRCRAFT JACKING - POINTS IV AND V | 5 | |
| G07006-1 | ADAPTER ASSEMBLY, AIRCRAFT JACKING - POINTS VII AND VIII | 1 | |
| G07015-1 | ADAPTER ASSEMBLY - AIRCRAFT JACKING WBL 583 | 1 | |
| G32078-1 | SPL-5142 - LOCK ASSEMBLY - NOSE GEAR MOORING/ JACKING FOR 2.24 INCH DIA STEERING PISTON ROD | 6 | |
| G57012-1 | ADAPTER ASSEMBLY - AIRCRAFT JACKING WBL 585 | 4 | |
| G670071000-1 | JACK PAD ASSEMBLY | 5 | |
| G670071000−1 | Jack Pad Assembly | 5 | |
| GSE0700469 | WING JACK PAD ASSEMBLY (LH) | 1 | |
| GSE0700470 | WING JACK PAD ASSEMBLY (RH) | 1 | |
| GSE3200486 GSE3200033 | MAIN LANDING GEAR JACK PAD ASSEMBLY | 1 | |
| HCS2015-05 | VACUUM HOSE W/SNIFFER ASSEMBLY,10FT,STAINLESS STEEL JACKET | 3 | |
| HLA5959 | Hose Assembly for Air Supply to Jacks for Standard Valve | 1 | |
| HLA5960 | Hose Assembly for Air Supply to Jacks for High Flow Valve | 1 | |
| HU55865-4 | JACKING TROLLEY FOR GEARBOX ASSEMBLY | 5 | |
| J20009-108 | JACK ASSEMBLY - HYDRAULIC | 7 | |
| J20009-109 | HYDRAULIC JACK ASSEMBLY | 11 | |
| J20009-110 | Hydraulic Jack Assembly | 12 | |
| J32014-36 | Jack Screw Assembly | 1 | |
| J32014-92 | Jack Screw Assembly | 1 | |
| J32066-17 | CENTER JACK ASSEMBLY | 1 | |
| J32082-4 | JACK SCREW ASSEMBLY | 1 | |
| J55004 | Assembly, Jack Horizontal Stabilizer | 1 | |
| K07001-18 | JACKING BEAM ASSEMBLY | 7 | |
| K21004-40 | ADAPTER ASSEMBLY - JACK, HEAT EXCHANGER CLUSTER, AC PACK | 5 | |
| K21004-72 | ADAPTER ASSEMBLY - JACK, HEAT EXCHANGER CLUSTER, AC PACK | 9 | |
| K21004-79 | ADAPTER ASSEMBLY - JACK, HEAT EXCHANGER CLUSTER, AC PACK | 2 | |
| K21004-85 | ADAPTER ASSEMBLY - JACK, HEAT EXCHANGER CLUSTER, AC PACK | 5 | |
| MH13 | HOSE: HYD,ASSEMBLY, TTJ & TTJ3 TRANSMISSION JACKS | 3 | |
| MIT65B18229 | JACKING BAR ASSEMBLY - MAIN LANDING GEAR AXLE | 1 | |
| PAF45180P | MEYER HYDRAULICS Pump Assembly, For AJS5 Aircraft Jack | 2 | |
| PAS60180P | PUMP: HYD,ASSEMBLY, FITS JACK MODEL TTJ & TTJ3 | 2 | |
| PWA80611 | JACK-HYDRAULIC - MAIN GEARBOX ASSEMBLY | 6 | |
| PWA85931 | PULLER-JACKSCREW ENGINE ASSEMBLY PMA ROTOR | 2 | |
| PWA86551 | PULLER - JACKSCREW, ENGINE ASSEMBLY, MAIN GEARBOX, PMA ROTOR | 1 | |
| PWA88231 | PULLER - JACKSCREW, ENGINE ASSEMBLY, OIL TANK REMOVAL | 1 | |
| R1988 | ADAPTER: LEVELING,JACK,ASSEMBLY, | 13 | |
| RB T103282 | Transmission Jack Assembly | 1 | |
| RBT18640 | Payload Jacking Assembly | 1 | |
| RBW1691A0000-01 | MLG JACKING DOME ASSEMBLY | 2 | |
| RBWG1019-SA11 | JACKING ASSEMBLY | 2 | |
| RRT110590-1 | JACKING TROLLEY FOR GEARBOX ASSEMBLY | 2 | |
| SE27-4503 | Holder AssemblyStabillizer Trim Jackscrew Ball Nut and Screw Assembly . | 1 | |
| SPL-1494 | ADAPTER ASSEMBLY, WING JACKING | 1 | |
| SPL-2262 | SET - TOOL, JACKSCREW, ENGINE DISASSEMBLY | 1 | |
| TEM-120000-100 | JACK FOR MLG WHEEL ASSEMBLY CHANGE | 1 | |
| f 80000-6 | adapter assembly aircraft jacking | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
