| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 856A2590G01 | Inst/Rem | 1 | |
| ME65B40508-1 | INST/REM | 3 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 109-3101-93-123 | TOOL KIT BUSHING UPPER LINK ROTATING SCISSOR INST/REM | 1 | |
| 10C2141 | INST/REMOVE FIXTURE | 1 | |
| 10m-9484 | NGS Inst/Removal kit | 1 | |
| 114-1086-AZL | TOOL FOR REMOVAL/INSTALLATION OF THE BEARING / FERRAMENTA PARA INST/REM ROLAMENTO | 1 | |
| 114-231 | TOOL FOR INST/REMOV. OF AN ADJUSTER | 2 | |
| 171T20041-401 | TOOL - INST/REM WING FAIRING | 1 | |
| 18C1080 | FXTR,LIFT-HPTR INST/REMOV | 1 | |
| 1C6872G01 | Fixture, Inst/Removal -AGB Horizontal | 1 | |
| 1C9336G01 | Fixture Assy, Inst/Rem. Aft Drive Shaft | 1 | |
| 2024 | ADAPTER-INST/REM, FU | 10 | |
| 2C14199G05 | FIXT. INST/REM HP TURB MOD ASSY | 1 | |
| 2C14199G07 | FIXTURE, INST/REM HPT | 4 | |
| 2C14612 | INST/REMOVE CVP SUPPORT | 1 | |
| 2C14676G01 | FIXTURE INST/REM | 1 | |
| 2C14676G02 | FIXTURE INST/REM AIR TUBE STAGE 1 | 1 | |
| 2C14691G01 | FIXTURE, INST/REMOVE COMBUSTOR | 2 | |
| 2C14693 | TOOL SET, INST/REMOVE LP TURB MODULE TO CORE MOD | 1 | |
| 2C14693G01 | TOOL SET INST/REM | 3 | |
| 2C14871G02 | FIXTURE,INST/REM-MANIFOLD N01 BEARING | 2 | |
| 2CF65B80511 | INST/REMVL TOOL | 1 | |
| 2MIT2A264-0812-1 | Inst/Rem Tool Adapter/Torque Wrench | 5 | |
| 332A93-3190-00 | MAST INST/REMOVAL PROTECTION GUI | 1 | |
| 3936857-1 | MLG BREAK PROTECTOR SET INST/REM | 7 | |
| 558-1-05903 | BOOSTER PUMP INST/REM TOOL | 17 | |
| 5965689-1 | VSCF GEN INST/REM RISER | 1 | |
| 5981314-1 | VSCF GEN INST/REM JACK | 1 | |
| 856A1000G03 | WRENCH, INST/REMOVAL;SEE M1 | 3 | |
| 856A1000G08 | WRENCH INST/REM | 4 | |
| 856A1000G09 | WRENCH INST/REM | 6 | |
| 856A1490G05 | FIXT.INST/REM.MOD 8 | 6 | |
| 856A1818G01 | FIXT INST/REM AIR SEAL IGB | 3 | |
| 856A2677G01 | Fixture Inst/Rem | 21 | |
| 856A3415G02 | Toolset-Inst/Rem | 1 | |
| 856A3427G01 | INST/REM TOOL | 1 | |
| 856A3427G02 | INST/REM TOOL | 1 | |
| 856A3427G03 | INST/REM TOOL | 1 | |
| 856A3427G04 | INST/REM TOOL | 5 | |
| 856A3427G05 | SET - TOOL, INST/REM, AGB/TGB MAGNETIC SEALS - CFM56-3 ENGINE | 6 | |
| 856A3440G01 | TOOL SET, INST/REM. LPT SHAFT BALANCE | 1 | |
| 856A3440G02 | TOOL SET, INST/REM. LPT SHAFT BALANCE | 1 | |
| 856A3440G03 | TOOL SEL, INST/REM. BALANCING BRG_LPT SHAFT | 1 | |
| 856A3576G01 | TOOL SET, INST/REM - AGB/TGB MAGNETIC SEALS | 21 | |
| 856AI000G03 | WRENCH, INST/REMOVAL;SEE MI | 1 | |
| 8C2666G01 | FIXTURE INST/REM - LRU MAX LOAD CAPACITY OF 400LB | 1 | |
| 8C2666G02 | FIXTURE INST/REM - LRU MAX LOAD CAPACITY OF 400LB | 1 | |
| 8C3001 | TOOL INST/REMOVE | 1 | |
| 9429M68G02 | TOOL SET INST/REM HPT ROTOR RETAININ | 3 | |
| 9480M86G01 | TOOL, INST/REM | 1 | |
| 956A3616G01 | Adapter Inst/Rem FADEC (193) | 5 | |
| 9C1004 | FIXTURE, INST/REM STAGE 2 | 1 | |
| 9C1050 | FIXTURE, INST/REM-VARI C/G | 1 | |
| A07007-33 | VERT. FIN INST/REM SLING | 3 | |
| A24006-1-B | Battery Inst/Remove Tool | 1 | |
| A27022-75 | SLING EQUIP- RUDDER INST/REM | 3 | |
| A27022-81 | SLING EQUIP. - RUDDER, INST/REM. | 11 | |
| A32015-9 | INST/REM DOWNLOCK TOOL | 22 | |
| A54011-25 | MID SPAR FUSE PIN INST/REM | 6 | |
| AB72001-SK7 | PULLER/PUSHER, FAN BLADE ROTOR INST/REM. | 1 | |
| AD-1457-1-BUS-INST/REM-TL | AD-1457-1-BUS-INST/REM-TL | 1 | |
| AGE-00923-401 | DEVICE-INST/REMOVAL, FUSELAGE TANK | 1 | |
| AGE-01115-401 | DOLLY-FORWARD FUSELAGE TANK INST/REMOVAL | 1 | |
| AGE-02755-401 | Tool, Inst/Removal -ADSP Cover | 2 | |
| AGE-03815-001 | SPECIAL BIT CVR MIC SCREW INST/REM | 2 | |
| AGE14727 | WRENCH, RAT HUB BEARING INST/REMV | 3 | |
| AT590LPR | HI-LOK INST/REMOVAL KIT | 1 | |
| ATICBHT-01 | CYLNDRICAL BODY INST/REMV MANU | 1 | |
| B27011-4 | HORIZ. STAB. JACKSCREW INST/REM | 6 | |
| B27011-62 | FRAME ASSEMBLY - HORIZ. STAB. JACKSCREW INST/REM | 4 | |
| B27011-71 | TRUNNION ASSEMBLY - HORIZ. STAB. JACKSCREW INST/REM | 6 | |
| B27011-77 | HORIZ. STAB. JACKSCREW INST/REM | 5 | |
| B27011-79 | Inst/Rem Eqpt - Horizontal | 18 | |
| B27012-1 | SLING EQT INST/REMOV AILERON | 5 | |
| B27075 | HOIST ADAPTER -0 INST/REMOVAL, FLAP TRACK | 1 | |
| B27075-20 | HOIST ADAPTER, INST/REM FLAP TRACK | 7 | |
| B28004-1 | SOCKET - INST/REM COLLIMATOR SLEEVE | 8 | |
| B32005-67 | Overhead Inst/Remove Equipment | 1 | |
| B32020 | INST/REM EQUIP-MAIN LANDING GEAR | 1 | |
| B32020 REV C | INST/REM EQUIP-MAIN LANDING GEAR | 1 | |
| B32020-40 | INST/REM EQUIP-MAIN LANDING GEAR | 3 | |
| B32020-45 | MLG INST/REM. EQUIP | 11 | |
| B32049-6 | LEVERAGE EQUPT. - INST/REM, PNEUMATIC DUCT ENG. STRUT | 5 | |
| B32052-1 | Inst/Rem Equipment-NLG Shock Strut | 4 | |
| B36001-1 | INST/REM PLATFORM | 5 | |
| B36003 | LEVERAGE EQPT INST/REMOVAL PNEUMATIC DUCT ENGINE STRUT | 1 | |
| B36003-1 | LEVERAGE EQPT INST/REMVL ENG DUCT | 12 | |
| B52012-1 | GUIDE ARM INST/REM. | 4 | |
| B57001-23 | INST/REM TORQ T/E FLAP | 5 | |
| B57003-33 | TRUNNION MLG BEARING & MOUNT INST/REM | 11 | |
| BCREF152354 | INST/REM TOOL ADAPTER/TORQUE WRENCH | 1 | |
| C21005-70 | JACK ADAPTER INST/REM AIR COND PACK | 9 | |
| C24004-1 | Power Distribution Panel Inst/Rem Equ | 7 | |
| C27040-1 | HOIST ADAPTER-INST/REM | 5 | |
| C27040-1-M | HOIST ADAPTER-INST/REM | 1 | |
| C29002-17 | CACTUATOR INST/REM TOOL | 19 | |
| C32029-1 | PIN INST/REM KIT - MLG | 8 | |
| C32029-45 | PIN INST/REM KIT, MLG | 18 | |
| C32033-1 | NLG TRUNNION PIN INST/REM EQUIP. | 19 | |
| C49012-1 | INST/REMOVAL APU EXHAUST | 9 | |
| C71033-1 | INST/REM FRAME ASSEMBLY - INLET COWL | 8 | |
| C78025-21 | ACT. INST/REM TOOL | 21 | |
| C78025-30 | Actuator Inst/Rem Tool | 6 | |
| CP30459-1 | TRANSLATING SLEEVE INST/REM STAND | 3 | |
| CP30459/1 | T/R TRANSLATING SLEEVE Inst/Rem- ENGINE ON B757 WING RB211-535C & E4 | 3 | |
| CUTA1870528C | İNST/REM TOOL | 1 | |
| DAK266J | TOOL HAND INST/REMV | 3 | |
| DAPT60-0189-00 | BETA TUBE INST/REMOVE TOOL | 7 | |
| F27534100 | TOOL FOR THE INST/REMOVAL OF COMPLETE PISTON HOUSING | 3 | |
| F80207-1 | APU HEAT SHIELD INST/REMOVAL TOOL | 3 | |
| F80213-73 | INST/REM I/B TRAILING EDGE FLAPS | 11 | |
| G26010-134 | EQUIP INST/REM FIREX | 1 | |
| G26010-135 | EQUIP INST/REM FIREX | 1 | |
| G26010-176 | EQUIP INST/REM FIREX | 4 | |
| G500-145RN | CRANE, HYDR. INST/REM. LDG | 3 | |
| G57004-8 | TOOL INST/REMV WINGL | 1 | |
| HC132H0174-000 | IDG INST/REM.EQUIP. | 2 | |
| HU37502-1 | TOOL: INST/REM AIRSEAL | 1 | |
| HU55436-2 | TROLLEY INST/REM IDG | 11 | |
| IAE1J12004 | PULLER/PUSHER, FAN BLADE ROTOR INST/REM. | 13 | |
| IAE1P16067 | INST/REM FIXTURE | 1 | |
| J25005-1 | INST/REM INFLATION BOTTLE | 7 | |
| J25006-1 | INST/REM WING ESCAPE | 4 | |
| J32027-1 | Hoist NLG Inst/Rem | 1 | |
| J32043-114 | Sling, Overhead MLG Inst/Rem | 1 | |
| J32043-151 | SLING, OVERHEAD MLG INST/REM | 9 | |
| J49001-9 | Ballast - Fishpole , Inst/Rem APU Generator | 8 | |
| J51005-1 | Adaptor Inst/Remove | 4 | |
| J51005-2 | INST/REM ADAPTOR. FUSELAGE DRAIN VALVE | 2 | |
| J51005-7 | ADAPTER, INST/REM | 10 | |
| K21002-62 | TOOL-CARGO REF.UNIT INST/REMOV | 5 | |
| K47001-1 | AIR SEPERATION MODULE INST/REM | 3 | |
| K52024-69 | SLING, PAX DOOR INST/REM | 8 | |
| M47157-100 | NLG INST/REM TOOL A330/A340 AMM REF: 32-41-11-000-006-A | 19 | |
| M81969/14-02 | TOOL,INST/REM M81969/14 | 31 | |
| MLGFB737NG | B737 MLG INST/REM ASSY | 2 | |
| PF51-003-1 | FISHPOLE HOIST APU INST/REMOVAL | 11 | |
| PWA25028D | PUSHER - ENG ASY FAN ROTOR INST/REM_[PWA25028D] | 2 | |
| PWA45235 | WRENCH,INST/REM BORESCOPE PLUG | 6 | |
| R38 | HORIZONTAL SHAFT INST/REMOVAL TOOL | 2 | |
| R46014 | TOOL INST/REM NLG A330/A340 | 28 | |
| ST2580-381 | WRENCH-BEARING CAP INST/REMV, NLG DRAG BRACE | 4 | |
| TM4735G001 | MAG SEAL INST/REM TOOL | 3 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
