| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| A32015-9 | INSTALLATION/REMOVAL | 22 | |
| C71027-1 | INSTALLATION/REMOVAL | 13 | |
| J51005-7 | INSTALLATION/REMOVAL | 10 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 9C1132G05 | FIXTURE - INSTALLATION/REMOVAL, LINE REPLACEABLE U | 1 | |
| 0209 | SNAP RING, INSTALLATION/REMOVAL, 90 DEGREE PLIERS | 1 | |
| 109-3130-56-101 | T/R GRIP BUSHINGS INSTALLATION/REMOVAL | 1 | |
| 114-1581 | INSTALLATION/REMOVAL TOOL FOR RETAINING RING | 1 | |
| 114-223 | BEARING CUP INSTALLATION/REMOVAL SUPPORT | 1 | |
| 114-231 | Tool for installation/removal of adjuster spring | 2 | |
| 114-417 | SPRING INSTALLATION/REMOVAL TOOL | 2 | |
| 11C3080 | FIXT SET - INSTALLATION/REMOVAL-RTNG CLIP - OGV BOLT | 1 | |
| 11C3422 | STAND - INSTALLATION/REMOVAL-HPCR BALANCE ARBOR - AFT | 1 | |
| 11C3422G01 | STAND, INSTALLATION/REMOVAL - HPC ROTOR BALANCE ARBOR, AFT | 1 | |
| 14-6872-8100 | DOLLY - MLG INSTALLATION/REMOVAL (Q400) | 6 | |
| 145T06090 | WRENCH SET INSTALLATION/REMOVAL PYLON BUSHING (GSE 570) | 1 | |
| 170-64170-801 11H1 | KIT - AUXILIARY - HORI-ZONTAL STABILIZER AC-TUATOR INSTALLATION/REMOVAL | 1 | |
| 1C6872G01 | FIXTURE, INSTALLATION/REMOVAL, GEARBOX ASSY | 1 | |
| 1C9422G01 | FIXTUREINSTALLATION/REMOVAL CRF AFT CAS | 1 | |
| 1C9422G02 | Fixture, Installation/Removal - CRF Aft Case | 1 | |
| 2024 | ADAPTER - INSTALLATION/REMOVAL, FUSELAGE DRAIN VALVE | 10 | |
| 175066 | RETAINER INSTALLATION/REMOVAL | 1 | |
| 298493 | Adapter, Kit, Installation/Removal Seal and Spline Adapter | 1 | |
| 2566534 | METERING VALVE INSTALLATION/REMOVAL PULLER | 1 | |
| 2566540 | SHUTOFF SOLENOID INSTALLATION/REMOVAL PULLER | 1 | |
| 2566546 | SHUTTLE VALVE SLEEVE INSTALLATION/REMOVAL PULLER (CAGE: 06848) | 1 | |
| 2566820 | BURNER STAGING VALVE SOLENOID INSTALLATION/REMOVAL PULLER | 1 | |
| 2A1865-1 | INSTALLATION/REMOVAL TOOL, ROD SEAL | 1 | |
| 2C14176G04 | TOOL SET, INSTALLATION/REMOVAL-NO.5R BEARING | 2 | |
| 2C14176G05 | TOOL SET ‐ INSTALLATION/REMOVAL NO. 5R BEARING | 1 | |
| 2C14612G05 | TOOL, INSTALLATION/REMOVAL SUPPORTS CENTER VENT TUBE | 1 | |
| 2C14661G01 | FIXTURE, INSTALLATION/REMOVAL COMPRESSOR REAR FRAME ASSEMBLY | 2 | |
| 2C14693G01 | GUIDE SET, INSTALLATION/REMOVAL – LPT MODULE | 3 | |
| 2C14871G03 | Fixture, Installation/Removal - Manifold No. 1 Bearing | 1 | |
| 2C6356G03 | INSTALLATION/REMOVAL FIXTURE | 1 | |
| 2MIT65B60225 | INSTALLATION/REMOVAL EQUIPMENT - FREON BOTTLE | 1 | |
| 2OHME65B07630 | SLING - WINDSHIELD INSTALLATION/REMOVAL | 10 | |
| 332A91899002 | SLING, INSTALLATION/REMOVAL AVCS | 1 | |
| 351-9920_38GSE | BEAVER TAIL INSTALLATION/REMOVAL TOOL | 1 | |
| 455822-2 | INSTALLATION/REMOVAL TOOL | 1 | |
| 53921T200 | Stroking Piston Installation/Removal Tool | 1 | |
| 558-1-30072 | Installation/Removal Tool | 1 | |
| 5981310-1 | Jack -IDG Installation/Removal | 1 | |
| 65702-FE276/FE277 | Debooster Installation/Removal Tool | 1 | |
| 65702FE240-300 | DEBOOSTER INSTALLATION/REMOVAL | 1 | |
| 6877026 | "COO WASHER ASSEMBLY/ DISASSEMBLY TOOL COMPRESSES SPRING IN CARTRIDGE VALVE FOR INSTALLATION/REMOVAL OF SLOTTED WASHER. | 1 | |
| 835372-1 | Pin Installation/Removal Tool | 1 | |
| 856A1054G02 | TOOL SET INSTALLATION/REMOVAL RETAINER PIN IGB TO NO 3 BRG NUT | 10 | |
| 856A1358 | INSTALLATION/REMOVAL TOOL | 2 | |
| 856A1358G02 | FIXTURE, INSTALLATION/REMOVAL - MODULE 12 (INSTALLATION/REMOVAL FIXTURE) | 7 | |
| 856A1457G02 | TOOL, INSTALLATION/REMOVAL - AFT SPLIT RING, HP TURBINE (INSTALLATION/REMOVAL TOOL) | 4 | |
| 856A2527G02 | TOOL, INSTALLATION/REMOVAL - LPT MAJOR MODULE (INSTALLATION/REMOVAL TOOL) | 3 | |
| 856A2677G01 | REMOVABLE RETAINING RING INSTALLATION/REMOVAL FIXTURE | 21 | |
| 856A2961G03 | INSTALLATION/REMOVAL ACCESSORY SEAL | 14 | |
| 856A3012G03 | #2 BEARING INSTALLATION/REMOVAL PULLER | 6 | |
| 856A3033P01 | #1 BEARING INSTALLATION/REMOVAL SLEEVE | 9 | |
| 856A3279G03 | LOW PRESSURE TURBINE DISK INSTALLATION/REMOVAL SLEEVES | 7 | |
| 856A3308 | #4 BEARING INSTALLATION/REMOVAL PULLER | 1 | |
| 856A3358 | #4 BEARING INSTALLATION/REMOVAL FIXTURE | 1 | |
| 856A3427G05 | TOOL SET-INSTALLATION/REMOVAL | 6 | |
| 856A3432 | #4 BEARING INSTALLATION/REMOVAL FEELER GAUGE | 1 | |
| 856A3570 | #2 BEARING INSTALLATION/REMOVAL TORQUE TOOL | 1 | |
| 856A3572 | #1 BEARING INSTALLATION/REMOVAL NUT TORQUE TOOL | 1 | |
| 856A3578G08 | PLIERS SET, INSTALLATION/REMOVAL, BALANCE, CLIPS- LPT | 5 | |
| 856A3628G01 | #1 BEARING INSTALLATION/REMOVAL INSTALLATION TOOL | 4 | |
| 856A3708G01 | INSTALLATION/REMOVAL RADIAL DRIVE SHAFT | 10 | |
| 856A3760G05 | STAGE 2 INSTALLATION/REMOVAL OF VANE SEGMENTS | 4 | |
| 856A3763G03 | STAGE 3 INSTALLATION/REMOVAL OF VANE SEGMENTS | 6 | |
| 8813824000 | TOOL FOR INSTALLATION/REMOVAL OF MAGNETIC SEAL /FOR AGUSTA WESTLAND 109 / OEM: SAFRAN | 3 | |
| 8814136000 | INSTALLATION/REMOVAL TOOL | 1 | |
| 8814163000 | MAGNETIC SEAL INSTALLATION/REMOVAL TOOL | 3 | |
| 8816758000 | INSTALLATION/REMOVAL TOOL FOR THE RETAINING RING | 1 | |
| 8818171000 | SEAL RING INSTALLATION/REMOVAL TOOL | 1 | |
| 8C2666G01 | FIXTURE INSTALLATION/REMOVAL, LINE REPLACEABLE UNITS WITH MAX LOAD CAPACITY OF 400LB | 1 | |
| 8C2666G02 | FIXTURE - INSTALLATION/REMOVAL, LINE REPLACEABLE UNITS | 1 | |
| 9429M61 | JACK STAND - LRU INSTALLATION/REMOVAL | 1 | |
| 9429M68G02 | TOOL, INSTALLATION/REMOVAL - AFT SPLIT RING, HP TURBINE (INSTALLATION/REMOVAL TOOL) | 3 | |
| 9446M42G02 | STAND, JACK-LRU INSTALLATION/REMOVAL | 1 | |
| 9446M93P01 | STAND, JACK-LRU INSTALLATION/REMOVAL | 1 | |
| 9471M12 | STAND, JACK-LRU INSTALLATION/REMOVAL | 1 | |
| 956A3616G01 | ADAPTER - INSTALLATION/REMOVAL, FADEC | 5 | |
| 98F52308279000 | Bar Actuator, Installation/Removal. | 19 | |
| 98S28002515000 | FUEL PUMP INSTALLATION/REMOVAL | 13 | |
| 9C1132G03 | SPL-331 FIXTURE - INSTALLATION/REMOVAL, LINE REPLACEABLE UNITS 777-300ER | 3 | |
| 9C1132G04 | FIXTURE - INSTALLATION/REMOVAL, LINE REPLACEABLE UNITS WITH MAX LOAD CAPACITY OF 100LB | 1 | |
| 9C1132G05 | FIXTURE - INSTALLATION/REMOVAL, LINE REPLACEABLE U | 1 | |
| 9C1132G06 | FIXTURE - INSTALLATION/REMOVAL, LINE REPLACEABLE U | 3 | |
| 9C3051G01 | STRAP, SUPPORT, INSTALLATION/REMOVAL FADEC (SUPPORT STRAP) | 1 | |
| A27022-75 | SLING EQUIPMENT - RUDDER INSTALLATION/REMOVAL | 3 | |
| A27022-81 | SLING EQUIPMENT - RUDDER INSTALLATION/REMOVAL | 11 | |
| A32015-9 | INSTALLATION/REMOVAL TOOL - DOWNLOCK, MAIN LANDING GEAR (MLG) AND NOSE LANDING GEAR (NLG) | 22 | |
| A32032-64 | JACKING, MLG INSTALLATION/REMOVAL | 13 | |
| A32032-65 | SLING - OVERHEAD, MLG INSTALLATION/REMOVAL | 13 | |
| A32109-41 | PIN INSTALLATION/REMOVAL EQPT | 1 | |
| A32109-46 | PIN INSTALLATION/REMOVAL KIT - MAIN LANDING GEAR (MLG) | 1 | |
| A32115-6 | OVERHEAD INSTALLATION/REMOVAL EQUIPMENT - MAIN LANDING GEAR (MLG) | 1 | |
| A32115-82 | OVERHEAD INSTALLATION/REMOVAL EQUIPMENT - MAIN LANDING GEAR (MLG) | 1 | |
| A32115-83 | OVERHEAD INSTALLATION/REMOVAL EQUIPMENT - MAIN LANDING GEAR (MLG) | 1 | |
| A51280 | TOOL INSTALLATION/REMOVAL | 3 | |
| A52010-49 | CLAMP EQUIPMENT - SPRING INSTALLATION/REMOVAL, BULK CARGO DOOR | 2 | |
| A52010-50 | CLAMP EQUIPMENT - SPRING INSTALLATION/REMOVAL, BULK CARGO DOOR | 3 | |
| A52010-51 | CLAMP EQUIPMENT - SPRING INSTALLATION/REMOVAL, BULK CARGO DOOR | 8 | |
| A52010-73 | CLAMP EQUIPMENT - SPRING INSTALLATION/REMOVAL, BULK CARGO DOOR | 1 | |
| A52010-74 | CLAMP EQUIPMENT - SPRING INSTALLATION/REMOVAL, BULK CARGO DOOR | 1 | |
| AC21866000 | INSTALLATION/REMOVAL TOOL | 3 | |
| AGE-01115-401 | DOLLY - INSTALLATION/REMOVAL OF THE FORWARD FUSELAGE TANK | 1 | |
| AGE-01170-401 | SUPPORT-INSTALLATION/REMOVAL,ACM | 3 | |
| AGE-04164-401 | PLIER, INSTALLATION/REMOVAL-CONECTOR, PYLON | 1 | |
| AGE-04165-401 | PLIER, INSTALLATION/REMOVAL-CONECTOR, MACHINE GUN | 1 | |
| AGE-04361-401 | VERTICAL STABILIZER TOP BALL JOINT/BUSHINGINSTALLATION/REMOVAL KIT | 2 | |
| AGE-04630-401 | TOOL SET - INSTALLATION/REMOVAL, LUGBUSHING | 1 | |
| AGE10957 | ROTOR INSTALLATION/REMOVAL TOOL | 2 | |
| AID-00807 | SEAL RUNNER INSTALLATION/REMOVAL TOOL | 1 | |
| AID-00815 | Aft carbon seal installation/removal tool | 1 | |
| AID-00826 | Roller bearing race installation/removal tool (outer race) | 1 | |
| AID-00868 | Snubber installation/removal tool | 1 | |
| AID-01102 | BEARING RACE INSTALLATION/REMOVAL | 1 | |
| ASS-01098 | Bearing installation/removal tool | 1 | |
| B27011-79 | INSTALLATION/REMOVAL EQUIPMENT - HORIZONTAL STABILIZER JACKSCREW | 18 | |
| B27012 | SLING EQUIPMENT -0 INSTALLATION/REMOVAL AILERON | 1 | |
| B27012-1 | Sling Eqpt - Installation/Removal, Aileron | 5 | |
| B27075-1 | HOIST ADAPTER - INSTALLATION/REMOVAL, FLAP TRACK | 1 | |
| B27075-20 | HOIST ADAPTER - INSTALLATION/REMOVAL, FLAP TRACK | 7 | |
| B28004-1 | SOCKET - INSTALLATION/REMOVAL, COLLIMATOR SLEEVE | 8 | |
| B32005-67 | OVERHEAD INSTALLATION/REMOVAL EQUIPMENT - NOSE LANDING GEAR | 1 | |
| B32005-68 | OVERHEAD INSTALLATION/REMOVAL EQUIPMENT - NOSE LANDING GEAR | 11 | |
| B32020-1 | INSTALLATION/REMOVAL EQUIPMENT - MAIN LANDING GEAR | 1 | |
| B32020-33 | INSTALLATION/REMOVAL EQUIPMENT - MAIN LANDING GEAR | 5 | |
| B32020-40 | INSTALLATION/REMOVAL EQUIPMENT - MAIN LANDING GEAR | 3 | |
| B32020-45 | INSTALLATION/REMOVAL EQUIPMENT - MAIN LANDING GEAR | 11 | |
| B32052-1 | INSTALLATION/REMOVAL EQUIPMENT - ORIFICE, NOSE LANDING GEAR (NLG) SHOCK STRUT | 4 | |
| B36003-1 | LEVERAGE EQUIPMENT - INSTALLATION/REMOVAL, PNEUMATIC DUCT, ENGINE STRUT | 12 | |
| B51025 | TOOL - INSTALLATION/REMOVAL | 3 | |
| B52012-1 | WRENCH - GUIDE ARM INSTALLATION/REMOVAL, PASSENGER DOOR | 4 | |
| B57001-1 | INSTALLATION/REMOVAL EQUIPMENT - TORQUE TUBE, INBOARD TRAILING EDGE FLAP | 1 | |
| B57001-23 | INSTALLATION/REMOVAL EQUIPMENT - TORQUE TUBE, INBOARD TRAILING EDGE FLAP | 5 | |
| BAT-HKHND | "FASTENER INSTALLATION/REMOVAL | 1 | |
| C21005-1 | JACK ADAPTER - INSTALLATION/REMOVAL, AIR CONDITIONING PACK | 4 | |
| C21005-62 | HOIST ADAPTER - INSTALLATION/REMOVAL - AIR CONDITIONING PACK | 3 | |
| C21005-70 | JACK ADAPTER - INSTALLATION/REMOVAL, AIR CONDITIONING PACK | 9 | |
| C24002-78 | JACK ADAPTER - INSTALLATION/REMOVAL, AIR CONDITIONING PACK | 17 | |
| C24004-43 | Installation/Removal Equipment | 7 | |
| C25002-1 | INSTALLATION/REMOVAL TOOL | 9 | |
| C25002-1 | INSTALLATION/REMOVAL TOOL | 9 | |
| C25002-2 | INSTALLATION/REMOVAL TOOL | 1 | |
| C26008 | Installation/Removal Equipment - Cargo Fire Extinguisher Bottle | 1 | |
| C26008-1 | Installation/Removal Equipment - Cargo Fire Extinguisher Bottle | 4 | |
| C26008-148 | INSTALLATION/REMOVAL EQUIPMENT - CARGO FIRE EXTINGUISHER BOTTLE | 3 | |
| C26009 | Installation/Removal Equipment - Engine Fire Extinguisher Bottle | 1 | |
| C27040-1 | Hoist Adapter - Installation/Removal, Flap Track | 5 | |
| C27040-29 | Hoist Adapter - Installation/Removal, Flap Track (CE) | 5 | |
| C27055-1 | Sling - Aileron, Installation/Removal | 13 | |
| C32029-1 | PIN INSTALLATION/REMOVAL KIT - MAIN LANDING GEAR | 8 | |
| C32029-10 | THREAD PROTECTOR-PIN INSTALLATION/REMOVAL KIT MLG | 7 | |
| C32029-11 | SLUG DRIVER-PIN INSTALLATION/REMOVAL KIT MLG | 6 | |
| C32029-12 | THREAD PROTECTOR-PIN INSTALLATION/REMOVAL KIT MLG | 4 | |
| C32029-13 | THREAD PROTECTOR-PIN INSTALLATION/REMOVAL KIT MLG | 2 | |
| C32029-14 | PIN INSTALLATION/REMOVAL KIT | 4 | |
| C32029-15 | THREAD PROTECTOR-PIN INSTALLATION/REMOVAL KIT MLG | 6 | |
| C32029-16 | THREAD PROTECTOR-PIN INSTALLATION/REMOVAL KIT MLG | 6 | |
| C32029-17 | SLUG DRIVER-PIN INSTALLATION/REMOVAL KIT MLG | 2 | |
| C32029-18 | PIN INSTALLATION/REMOVAL KIT | 1 | |
| C32029-19 | PIN INSTALLATION/REMOVAL KIT | 1 | |
| C32029-27 | PIN INSTALLATION/REMOVAL KIT | 1 | |
| C32029-3 | WRENCH ADAPTOR-PIN INSTALLATION/REMOVAL KIT MLG | 4 | |
| C32029-31 | PIN INSTALLATION/REMOVAL KIT | 4 | |
| C32029-33 | PIN INSTALLATION/REMOVAL KIT | 5 | |
| C32029-38 | Pin Installation/Removal Kit - Main Landing Gear | 6 | |
| C32029-39 | PIN INSTALLATION/REMOVAL KIT | 7 | |
| C32029-4 | WRENCH ADAPTOR-PIN INSTALLATION/REMOVAL KIT MLG | 3 | |
| C32029-45 | Pin Installation/Removal Kit - Main Landing Gear | 18 | |
| C32029-48 | PIN INSTALLATION/REMOVAL KIT | 6 | |
| C32029-49 | PIN INSTALLATION/REMOVAL KIT | 6 | |
| C32029-5 | WRENCH ADAPTOR-PIN INSTALLATION/REMOVAL KIT MLG | 3 | |
| C32029-50 | PIN INSTALLATION/REMOVAL KIT | 5 | |
| C32029-52 | PIN INSTALLATION/REMOVAL KIT - MAIN LANDING GEAR | 2 | |
| C32029-6 | WRENCH ADAPTOR-PIN INSTALLATION/REMOVAL KIT MLG | 6 | |
| C32029-7 | WRENCH ADAPTOR-PIN INSTALLATION/REMOVAL KIT MLG | 6 | |
| C32029-79 | PIN INSTALLATION/REMOVAL KIT - MAIN LANDING GEAR | 1 | |
| C32029-8 | SLUG DRIVER ASSEMBLY PIN INSTALLATION/REMOVAL KIT MLG | 3 | |
| C32029-87 | PIN INSTALLATION/REMOVAL KIT - MAIN LANDING GEAR | 6 | |
| C32029-9 | THREAD PROTECTOR-PIN INSTALLATION/REMOVAL KIT MLG | 7 | |
| C32049-1 | Outrigger Equipment - Nose Landing Gear Installation/Removal | 16 | |
| C49012-1 | Installation/Removal Equipment - Auxiliary Power Unit Exhaust (CE) | 9 | |
| C49012-69 | INSTALLATION/REMOVAL EQUIPMENT - AUXILIARY POWER UNIT EXHAUST | 4 | |
| C71027-1 | Installation/Removal Frame Equipment - Inlet Cowl | 13 | |
| C71033 | INSTALLATION/REMOVAL FRAME ASSEMBLY - INLET COWL | 1 | |
| C71033 | Installation/Removal Frame Assembly - Inlet Cowl | 1 | |
| C71033-1 | Installation/Removal Frame Equipment - Inlet Cowl, | 8 | |
| C78009-72 | TOOL, INSTALLATION/REMOVAL | 6 | |
| C78025-1 | ACTUATOR INSTALLATION/REMOVAL | 1 | |
| C78025-1 T007809 | Actuator installation/removal tool | 1 | |
| C78025-21 | Actuator - Installation/Removal Tool | 21 | |
| C78025-21 | TOOL - ACTUATOR, INSTALLATION/REMOVAL | 21 | |
| C78025-30 | ACTUATOR - INSTALLATION/REMOVAL TOOL | 6 | |
| CP27118 | SLING - WEBBING, INBOARD'C' DUCT INSTALLATION/REMOVAL - RB211-535ENGINES | 3 | |
| CP30459/1 | FRAME/ SLING -TRANSLATING SLEEVE INSTALLATION/REMOVAL | 3 | |
| CS-710-119 | INSTALLATION/REMOVAL TOOL PREESURE RELEIF VALVE | 2 | |
| CS-710-144 | HEATING ELEMENT INSTALLATION/REMOVAL TOOL | 2 | |
| CS710-119 | INSTALLATION/REMOVAL TOOL PRESSURE RELIEF VALVE | 2 | |
| CTA1160 | INSTALLATION/REMOVAL TOOL 5EA | 17 | |
| CUTA1870528C | Installation/Removal Tool | 1 | |
| D625P50A1101 | ROTOR MAST INSTALLATION/REMOVAL－KIT １ | 1 | |
| D625P50A1102 | ROTOR MAST INSTALLATION/REMOVAL－KIT ２ | 1 | |
| D625P50A1103 | ROTOR MAST INSTALLATION/REMOVAL－KIT ３ | 1 | |
| DBHO-17 | INSTALLATION/REMOVAL TOOL, PART NO. M81969/14-02, REMOVAL TOOL, PART NO. M81969/14-02) | 1 | |
| DMC-216 | INSTALLATION/REMOVAL TOOL, PART NO. M81969/14-02, REMOVAL TOOL, PART NO. M81969/14-02) | 4 | |
| EE2202N | SLING – OVERHEAD, MLG INSTALLATION/REMOVAL | 1 | |
| F27173000 | Installation/Removal of piston housing bush | 1 | |
| F27174000 | Installation/Removal of bush assembly on/from torque tube | 1 | |
| F80207-1 | Installation/Removal Equipment -Auxiliary Power Unit Shield | 3 | |
| G24002 | HOIST EQPT -0 INSTALLATION/REMOVAL, BATTERY, APU | 1 | |
| G26002-42 | INSTALLATION/REMOVAL EQUIPMENT - FIRE EXTINGUISHER BOTTLE | 1 | |
| G26010 | INSTALLATION/REMOVAL EQPT -0 EXTINGUISHER BOTTLE | 1 | |
| G26010-134 | INSTALLATION/REMOVAL EQUIPMENT - FIRE EXTINGUISHER BOTTLE (CE) | 1 | |
| G26010-135 | INSTALLATION/REMOVAL EQUIPMENT - FIRE EXTINGUISHER BOTTLE (CE) | 1 | |
| G26010-176 | INSTALLATION/REMOVAL EQUIPMENT - FIRE EXTINGUISHER BOTTLE (CE) | 4 | |
| G26010-177 | INSTALLATION/REMOVAL EQUIPMENT - FIRE EXTINGUISHER BOTTLE (CE) | 1 | |
| G57004-7 | INSTALLATION/REMOVAL TOOL - WINGLET AFT MOUNT BOLTS | 6 | |
| G601R273301-1 | ANGLE OF ATTACK (AOA) TRANSDUCER INSTALLATION/REMOVAL TOOL | 2 | |
| G698-2720002-101 | Pcu Rudder ? Installation/Removal Tool | 1 | |
| G698−2720002−101 | PCU Rudder − Installation/Removal Tool | 1 | |
| G78004 | INSTALLATION/REMOVAL EQUIPMENT -0 OVERSIZE | 1 | |
| G78004-1 | INSTALLATION/REMOVAL EQUIPMENT - OVERSIZE BEARING | 1 | |
| G78004-12 | INSTALLATION/REMOVAL EQUIPMENT - OVERSIZE BEARING | 1 | |
| G78004-13 | INSTALLATION/REMOVAL EQUIPMENT - OVERSIZE BEARING | 1 | |
| GSE 266 | VERTICAL STABILIZER TOP BALL JOINT/BUSHING INSTALLATION/REMOVAL KIT | 1 | |
| HLKT1500 | HI-LOCK HAND INSTALLATION/REMOVAL | 1 | |
| HU81280 | BLOCK-SUPPORT,INSTALLATION/REMOVAL OF THE (31) M | 1 | |
| HU87130 | PLATFORM - PIVOT DOOR, INSTALLATION/REMOVAL. RESTS AT 3 OR 9 O'CLOCK POSITION | 3 | |
| IAE1F10170 | BASE INSTALLATION/REMOVAL TOOL | 8 | |
| IPIRT4104-10 | PORTABLE INSTALLATION/REMOVAL TOOL FOR BEARING MS 14102-10 | 1 | |
| IPIRT4104-14 | PORTABLE INSTALLATION/REMOVAL TOOL FOR BEARING MS 14102-14 | 1 | |
| IPIRT4104-6 | PORTABLE INSTALLATION/REMOVAL TOOL FOR BEARING MS 14102-6 | 1 | |
| IPIRT4104-7 | PORTABLE INSTALLATION/REMOVAL TOOL FOR BEARING MS 14104-7 | 1 | |
| J25005-1 | INSTALLATION/REMOVAL EQUIPMENT - INFLATION BOTTLE, OVERWING (CE) | 7 | |
| J25006-1 | INSTALLATION/REMOVAL EQUIPMENT - OFF WING ESCAPE SLIDE (CE) | 4 | |
| J25006-20 | INSTALLATION/REMOVAL EQUIPMENT - OFF WING ESCAPE SLIDE (CE) | 6 | |
| J25006-37 | INSTALLATION/REMOVAL EQUIPMENT - OFF WING ESCAPE SLIDE | 3 | |
| J49001-9 | BALLAST FISHPOLE INSTALLATION/REMOVAL APU GEN. | 8 | |
| J49003 | HOIST EQPT-APU,INSTALLATION/REMOVAL | 1 | |
| J49003-43 | HOIST EQUIPMENT - APU, INSTALLATION/REMOVAL | 14 | |
| J49003-47 | HOIST EQUIPMENT - APU, INSTALLATION/REMOVAL | 9 | |
| J51005-1 | INSTALLATION/REMOVAL ADAPTER, FUSELAGE DRAIN VALVE | 4 | |
| J51005-2 | INSTALLATION/REMOVAL ADAPTER, FUSELAGE DRAIN VALVE | 2 | |
| J51005-7 | INSTALLATION/REMOVAL ADAPTER, FUSELAGE DRAIN VALVE | 10 | |
| J57003-16 | Sling Eqpt - Raked Wing Tip, Installation/Removal | 6 | |
| K21001-76 | Installation/Removal Cart | 2 | |
| K21003 | INSTALLATION/REMOVAL EQPT-PECS COOLING PUMP | 1 | |
| K21003-1 | INSTALLATION/REMOVAL EQUIPMENT - POWER ELECTRONICS COOLING SYSTEM (PECS) COOLING PUMP (CE) | 6 | |
| K21003-13 | INSTALLATION/REMOVAL EQPT-PECS COOLING PUMP | 1 | |
| K21003-14 | INSTALLATION/REMOVAL EQPT-PECS COOLING PUMP | 1 | |
| K21003-15 | INSTALLATION/REMOVAL EQPT-PECS COOLING PUMP | 1 | |
| K21003-19 | INSTALLATION/REMOVAL EQPT-PECS COOLING PUMP | 1 | |
| K21003-1 upgrade to K21003-67 | Installation/removal eqpt-pecs cooling pump | 1 | |
| K21003-2 | INSTALLATION/REMOVAL EQPT-PECS COOLING PUMP | 1 | |
| K21003-20 | INSTALLATION/REMOVAL EQPT-PECS COOLING PUMP | 1 | |
| K21003-25 | INSTALLATION/REMOVAL EQPT-PECS COOLING PUMP | 1 | |
| K21003-27 | INSTALLATION/REMOVAL EQPT-PECS COOLING PUMP | 1 | |
| K21003-28 | INSTALLATION/REMOVAL EQPT-PECS COOLING PUMP | 1 | |
| K21003-3 | INSTALLATION/REMOVAL EQPT-PECS COOLING PUMP | 1 | |
| K21003-33 | INSTALLATION/REMOVAL EQPT-PECS COOLING PUMP | 1 | |
| K21003-34 | INSTALLATION/REMOVAL EQPT-PECS COOLING PUMP | 1 | |
| K21003-35 | INSTALLATION/REMOVAL EQPT-PECS COOLING PUMP | 1 | |
| K21003-36 | INSTALLATION/REMOVAL EQPT-PECS COOLING PUMP | 1 | |
| K21003-37 | INSTALLATION/REMOVAL EQPT-PECS COOLING PUMP | 1 | |
| K21003-38 | INSTALLATION/REMOVAL EQPT-PECS COOLING PUMP | 1 | |
| K21003-39 | INSTALLATION/REMOVAL EQPT-PECS COOLING PUMP | 1 | |
| K21003-4 | INSTALLATION/REMOVAL EQPT-PECS COOLING PUMP | 1 | |
| K21003-41 | INSTALLATION/REMOVAL EQPT-PECS COOLING PUMP | 1 | |
| K21003-42 | INSTALLATION/REMOVAL EQPT-PECS COOLING PUMP | 1 | |
| K21003-43 | INSTALLATION/REMOVAL EQPT-PECS COOLING PUMP | 1 | |
| K21003-44 | INSTALLATION/REMOVAL EQPT-PECS COOLING PUMP | 1 | |
| K21003-45 | INSTALLATION/REMOVAL EQPT-PECS COOLING PUMP | 1 | |
| K21003-48 | INSTALLATION/REMOVAL EQPT-PECS COOLING PUMP | 1 | |
| K21003-5 | INSTALLATION/REMOVAL EQPT-PECS COOLING PUMP | 1 | |
| K21003-50 | INSTALLATION/REMOVAL EQPT-PECS COOLING PUMP | 1 | |
| K21003-54 | INSTALLATION/REMOVAL EQPT-PECS COOLING PUMP | 1 | |
| K21003-55 | INSTALLATION/REMOVAL EQPT-PECS COOLING PUMP | 1 | |
| K21003-67 | INSTALLATION/REMOVAL EQUIPMENT - POWER ELECTRONICS COOLING SYSTEM (PECS) COOLING PUMP (CE) | 10 | |
| K21003-7 | INSTALLATION/REMOVAL EQPT-PECS COOLING PUMP | 1 | |
| K21003-9 | INSTALLATION/REMOVAL EQPT-PECS COOLING PUMP | 1 | |
| K32014-1 | SLING - OVERHEAD, MLG INSTALLATION/REMOVAL (REQUIRES OVERHEAD CRANE HOIST) | 7 | |
| K47003-1 | Installation/Removal Equipment | 9 | |
| K52015-23 | SLING EQUIPMENT - LARGE CARGO DOOR INSTALLATION/REMOVAL (CE) | 7 | |
| K52032-1 | Installation/removal tool-edge protector | 5 | |
| K52032-1. | INSTALLATION/REMOVAL TOOL | 5 | |
| LTCT30329-01 | Tool, No. 4 Bearing Seal, Installation/Removal | 1 | |
| M81969-1-01 | INSTALLATION/REMOVAL TOOL 5EA | 23 | |
| M81969-1-03 | INSTALLATION/REMOVAL TOOL 5EA | 18 | |
| M81969-1-04 | INSTALLATION/REMOVAL TOOL 5EA | 18 | |
| M81969-14-01 | INSTALLATION/REMOVAL TOOL 5EA | 40 | |
| M81969-14-03 | INSTALLATION/REMOVAL TOOL 5EA | 34 | |
| M81969-14-04 | INSTALLATION/REMOVAL TOOL 5EA | 28 | |
| M81969-14-11 | INSTALLATION/REMOVAL TOOL 5EA | 30 | |
| M81969-39-01 | INSTALLATION/REMOVAL TOOL 5EA | 24 | |
| M81969/14-01 | INSTALLATION/REMOVAL TOOL | 40 | |
| M81969/14-02 | INSTALLATION/REMOVAL TOOL | 31 | |
| M81969/14-03 | INSTALLATION/REMOVAL TOOL | 34 | |
| M81969/14-04 | INSTALLATION/REMOVAL TOOL | 28 | |
| ME65B18231 | TOOL - INSTALLATION/REMOVAL, BULKHEAD AND RESTRICTOR, BODY LANDING GEAR STRUT | 1 | |
| ME65B18260 | TOOL INSTALLATION/REMOVAL - UPPER BULKHEAD, WING LANDING GEAR STRUT | 1 | |
| MIT65B05315 | TOOL - INSTALLATION/REMOVAL UPPER BULKHEAD, WING LANDING GEAR STRUT | 1 | |
| MIT65B07911 | WRENCH - GROUND START VALVE, INSTALLATION/REMOVAL | 2 | |
| MIT65B25952 | CRADLE ASSEMBLY - INSTALLATION/REMOVAL, AUXILIARY FUEL TANK | 1 | |
| MIT65B53300-1 | INSTALLATION/REMOVAL TOOL - GUIDE AND DRIVE UNIT, ELEVATOR GALLEY | 1 | |
| OHME65B81843-1 | SLING ASSEMBLY - HOIST INBOARD AILERON POWER CONTROL UNIT INSTALLATION/REMOVAL | 9 | |
| PWA28401 | GUIDE - DIFF CASE INSTALLATION/REMOVAL_[PWA28401] | 1 | |
| R46457 | Installation/Removal of spring in/from piston | 2 | |
| RB T103190-103 | Seal Installation/Removal Ring | 1 | |
| RB T103313-101 | Mast Nut Installation/Removal Tool Set | 1 | |
| RK5100 | COMPLETE INSTALLATION/REMOVAL KIT MONOGRAM AEROSPACE | 1 | |
| RRT14103-4 | TOOL, INSTALLATION/REMOVAL | 1 | |
| SKSP1425-501 | INSTALLATION/REMOVAL KIT BELL 407 MODEL DRIVESHAFT. TEST SET. | 1 | |
| SPL-14544 | INSTALLATION/REMOVAL FRAME EQUIPMENT - INLET COWL, | 1 | |
| SPL-1975 | ADAPTER - INSTALLATION/REMOVAL FUSELAGE DRAIN VALVE | 1 | |
| ST2580-381 | WRENCH - BEARING CAP INSTALLATION/REMOVAL, NLG DRAG BRACE | 4 | |
| T-450174 | PIN-INSTALLATION/REMOVAL | 1 | |
| T103307-101 | SEALING INSTALLATION/REMOVAL TOOL | 1 | |
| T63577 | TOOL - INSTALLATION/REMOVAL, SHUTOFF VALVE | 1 | |
| TA5038G001 | INSTALLATION/REMOVAL ENGINE POWER TAKE-O | 1 | |
| TA5042G001 | STARTER LIP SEAL INSTALLATION/REMOVAL TO | 1 | |
| TM0357G004 | MAGNETIC SEAL INSTALLATION/REMOVAL | 2 | |
| TM1079G002 | SEAL INSTALLATION/REMOVAL TOOL | 2 | |
| TM1285G001 | INSTALLATION/REMOVAL TOOL | 1 | |
| TM2190G001 | INSTALLATION/REMOVAL TOOL | 1 | |
| TM2252G001 | SEAL INSTALLATION/REMOVAL TOOL | 1 | |
| VEI-T1-0296 | RETAINING RING INSTALLATION/REMOVAL TOOL | 1 | |
| WAS-33662 | WRENCH - RAT HUB BEARING INSTALLATION/REMOVAL | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
