| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| PTM143 | INSPECTION M | 3 | |
| PTM147 | INSPECTION M | 1 | |
| PTM157 | INSPECTION M | 2 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 201137-CA | PROPELLER LIFTER -PERFORM MAGNETIC PARTICLE INSPECTION OF STRUCTURAL COMPONENTS, WELDING JOINTS, CLAMPING PINS, SHACKLES, AND PINS OF THE EQUIPMENT -PERFORM LOAD TESTS, CERTIFICATION OF ALL TOOL PINS, CHANGE OF WHEELS TO THE PACKAGING BOXES -ISSUE A TECH | 1 | |
| (CALIB) 30446-0033 | X/FGCOMP. INSPECTION EQUIPMENT (CALIBRATION) | 1 | |
| (CALIB) 341206-29 | BOOSTRAP -PERFORM MAGNETIC PARTICLE INSPECTION OF STRUCTURAL COMPONENTS, WELDING JOINTS, CLAMPING PINS, SHACKLES, AND PINS OF THE EQUIPMENT -PERFORM LOAD TESTS, CERTIFICATION OF ALL TOOL PINS, CHANGE OF WHEELS TO THE PACKAGING BOXES -ISSUE A TECHNICAL RE | 1 | |
| (CALIB) 98D71203501002 | BOOSTRAP A-320 -PERFORM MAGNETIC PARTICLE INSPECTION OF STRUCTURAL COMPONENTS, WELDING JOINTS, CLAMPING PINS, SHACKLES, AND PINS OF THE EQUIPMENT -PERFORM LOAD TESTS, CERTIFICATION OF ALL TOOL PINS, CHANGE OF WHEELS TO THE PACKAGING BOXES -ISSUE A TECH | 1 | |
| (CALIB) 98S71000003001 | ENGINE SLING -PERFORM MAGNETIC PARTICLE INSPECTION OF STRUCTURAL COMPONENTS, WELDING JOINTS, CLAMPING PINS, SHACKLES, AND PINS OF THE EQUIPMENT -PERFORM LOAD TESTS, CERTIFICATION OF ALL TOOL PINS, CHANGE OF WHEELS TO THE PACKAGING BOXES -ISSUE A TECHNICA | 1 | |
| (CALIB) 98S71003000002 | FIXTURE ENG/PROP R/I -PERFORM MAGNETIC PARTICLE INSPECTION OF STRUCTURAL COMPONENTS, WELDING JOINTS, CLAMPING PINS, SHACKLES, AND PINS OF THE EQUIPMENT -PERFORM LOAD TESTS, CERTIFICATION OF ALL TOOL PINS, CHANGE OF WHEELS TO THE PACKAGING BOXES -ISSUE A | 1 | |
| (CALIB) C71003-247 | BOOTSTRAP KIT CFM56-3 -PERFORM MAGNETIC PARTICLE INSPECTION OF STRUCTURAL COMPONENTS, WELDING JOINTS, CLAMPING PINS, SHACKLES, AND PINS OF THE EQUIPMENT -PERFORM LOAD TESTS, CERTIFICATION OF ALL TOOL PINS, CHANGE OF WHEELS TO THE PACKAGING BOXES -ISSUE A | 1 | |
| (CALIB) CTE8003 | BORESCOPE INSPECTION SYSTEM (CALIBRATION) | 1 | |
| (CALIB) IAE1J12359 | Bridge, Inspection No. 3 BRG Seal Runner, Intermediate (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J27079-31 | INSPECTION EQUIPMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J27079-38 | INSPECTION EQUIPMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) M6458-1 | BOOSTRAP A-320 -PERFORM MAGNETIC PARTICLE INSPECTION OF STRUCTURAL COMPONENTS, WELDING JOINTS, CLAMPING PINS, SHACKLES, AND PINS OF THE EQUIPMENT -PERFORM LOAD TESTS, CERTIFICATION OF ALL TOOL PINS, CHANGE OF WHEELS TO THE PACKAGING BOXES -ISSUE A TECH | 1 | |
| 00-010032 | GE-CFMI-723 INSPECTION KIT | 1 | |
| 00-010106 | GE-CFMI-723 INSPECTION KIT | 1 | |
| 006494 | INSPECTION MIRROR (CIRCLE) | 1 | |
| 008A038 | COMPLETE REMOTE FLUORESCENT PENETRANT INSPECTION (RFPI) KIT | 1 | |
| 062150 | MAGNETIC PARTICLE INSPECTION EQUIPMENT | 1 | |
| 082.270A | VIDEO INSPECTION CAMERA WITH FLEXIBLE HEAD | 1 | |
| 09-05588 | KIT INSPECTION PRISM | 1 | |
| 1.837.69-038 | DEFECTOMETER INSPECTION KIY | 1 | |
| 1/N-02-384 | Nomad Series N22 & N24 Reference Standard. for the inspection of Wing Strut Upper Fittings, Figure 27 Page 51. Includes Test Report and Certificate of Conformance. | 1 | |
| 10-194-9 | Inspection Gauge Ball Sets (Type: Inch) (Includes: 26"Pairs, 1/8" to 1") (Add to cart: Add To Cart) (Type: Metric) (Includes: 25 Pairs, 1 mm to 25 mm) (Add to cart: Add To Cart) | 1 | |
| 100001844228-0030 | BOROSCOPE, IPLEX PURCHASE IPLEX GT 4MM 3.5 METER VIDEOSCOPE W/ TIPS AND RIGID SLEEVE SET TO SUPPORT GEARBOX INSPECTIONS ON THE LANDING CRAFT, AIR CUSHION (LCAC) 100 CLASS CRAFT. | 1 | |
| 142 | Round Inspection Mirror - MADE IN USA! | 2 | |
| 157 | Oval Inspection Mirror - MADE IN USA! | 1 | |
| 2372 | INSPECTION MIRROR | 1 | |
| 14086 | LARGE ROUND INSPECTION MIRROR | 1 | |
| 14087 | RECTANGULAR INSPECTION MIRROR | 1 | |
| 14589 | INSPECTION MIRROR RECTANGLE WITH LED LIGHT | 1 | |
| 18948 | Magnaflux Contact Pad, 7.5 in L x 4.75 in W, Neoprene, For A-915 Magnetic Particle Inspection System | 1 | |
| 30063 | MICROEXPLORER DIGITAL INSPECTION CAMERA | 1 | |
| 100175 | UT -1352 FIXTURE MOUNT PLATFORM ( FOR PIECE PART LEVEL INSPECTION ), PW4000 DRUM. | 1 | |
| 018380400 | BETA 1838AM RECHARGEABLE LED INSPECTION LAMP | 1 | |
| 109-3101-58-1 | TAPPING INSPECTION HAMMER (STEEL) | 1 | |
| 109-3101-58-2 | TAPPING INSPECTION HAMMER (ALUMINUM) | 3 | |
| 1111432-GA | INSPECTION TOOL (MEGGIT 45402) | 1 | |
| 113-241-043 | WAYGATE KRAUTKRAMER (FORMERLY GE INSPECTION TECHNOLOGIES) GAMMA RHP 1MHZ X 0.5' TRANSDUCER | 1 | |
| 113-244-043 | WAYGATE KRAUTKRAMER (FORMERLY GE INSPECTION TECHNOLOGIES) GAMMA RHP 5MHZ X 0.5' TRANSDUCER. COUNTRY | 1 | |
| 114-1230 | GREASE SEAL INSPECTION TOOL W/ CLAMP KNOB AND BOLT RETAINER | 4 | |
| 114-1381 | CLAMP KNOB AND ASSEMBLED GREASE SEAL INSPECTION TOOL | 1 | |
| 114-1560-2 | BOTTOM PLATE - GREASE SEAL INSPECTION TOOL | 2 | |
| 114-1589-2 | BOTTOM PLATE - TOOL FOR OUTER WHEEL GREASE SEAL INSPECTION | 2 | |
| 114-1617 | TOP AND BOTTOM PLATESGREASE SEAL INSPECTION | 1 | |
| 114-548-1 | SEAL ASSEMBLY INSPECTION FICTURE | 1 | |
| 114-548-2 | SEAL ASSEMBLY INSPECTION FICTURE | 1 | |
| 114-785 | BRAKE INSPECTION TOOL (2 ITEMS) | 1 | |
| 1159SST643 | MYLAR INSPECTION TEMPLATE | 1 | |
| 1159SST643-1 | MYLAR INSPECTION TEMPLATE | 2 | |
| 1159SST643-2 | MYLAR INSPECTION TEMPLATE | 1 | |
| 118-140-095 | WAYGATE KRAUTKRAMER (FORMERLY GE INSPECTION TECHNOLOGIES) KBA532 PROBE CABLE | 1 | |
| 11C3487 | FIXTURE - INSPECTION-SEAL - SUMP-HPT ROTOR | 1 | |
| 11C3490 | FIXTURE - INSPECTION/MACHINING RESTRAIN-HP TURB CASE | 1 | |
| 127 - 0.100 | ALUMINUM SKIN CORROSION LOSS INSPECTION (IMPEDANCE PLANE DISPLAY) | 1 | |
| 127 - 0_100 | ALUMINUM SKIN CORROSION LOSS INSPECTION (IMPEDANCE PLANE DISPLAY) | 1 | |
| 12783-0404 | INSPECTION GAUGE 30.000mm | 1 | |
| 13010146-1 | MISSILE SHOE INSPECTION FIXTURE | 1 | |
| 13636T900183-1 | GAUGE - INSPECTION AFT ENGINE ISOLATORS (MV7671-5-04) | 1 | |
| 1422T3 | MAGNIFIER-ROUND INSPECTION | 1 | |
| 145T09065-401 | REFERENCE STANDARD FOR FASTENER HOLE INSPECTION WITH PN 145T09065-401AND EMBRAER GSE NUMBER 606. | 1 | |
| 163139 | INSPECTION MASTER, EDDY CURRENT | 1 | |
| 1838AM | BETA 1838AM RECHARGEABLE LED INSPECTION LAMP | 1 | |
| 18C1037 | ASSEMBLY FIXTURES:ASSEMBLY & INSPECTION FIXTURE | 1 | |
| 19286-0370 | Imperium™ Cable Assembly Inspection Gage for Receptacle Harness Assembly Kits for 1/0 and 1 AWG cables, 171466 series. | 1 | |
| 1C8067G01 | MOTOR, DRIVE - GAS GENERATOR INSPECTION | 1 | |
| 1C8067G01/02 | MOTOR, DRIVE - GAS GENERATOR INSPECTION | 1 | |
| 1C8067G02 | MOTOR, DRIVE - GAS GENERATOR INSPECTION | 1 | |
| 1C8171 | FIXTURE,INSPECTION-THERMAL SHI | 1 | |
| 1C8171G01 | FIXTURE,INSPECTION-THERMAL SHI | 1 | |
| 2001182 | Specialties low-level twin folding maintenance stand provides safe and easy transport access for aircraft maintenance and rolling stock inspection. Featuring an incredibly versatile folding design, the locking top portion of the stand can be folded up, ac | 1 | |
| 200X-SMA-1.25-2.5 | MICROSCOPE, FIBER INSPECTION - WITH SMA ADAPTERS | 1 | |
| 204-94034-1 | Boeing Reference Standard- Lower Lug APE-1 Primary , D204-12769-6 ASIP Inspection Program. Material: 4340 Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| 20728A | TELESCOPING INSPECTION MIRROR WITH BUILT-IN LED LIGHT FOR ENHANCED VISIBILITY IN TIGHT SPACES. | 1 | |
| 2801787 | DEFACTOMETER 1.837 AIRBUS HFEC INSPECTION KIT DRAWING NO . 1.837.69-0038 | 1 | |
| 21110114 | INSPECTION TOOL - I-BOLTS (LOADMASTER 3600) | 1 | |
| 2127-803 | LIGHT - INSPECTION EXPLOSION PROOF, 120 V, 50-400 HZ, FM APPROVED | 1 | |
| 21C7197G01 | FIXTURE, INSPECTION, MACHINING | 1 | |
| 21C7714G01 | OUTPUT SHAFT ASSEMBLY INSPECTION ADAPTER | 1 | |
| 21C8278G01 | FAN MODULE INSPECTION | 1 | |
| 21C878G01 | FIXTURE FAN MODULE INSPECTION | 1 | |
| 23033041 | RINGS--INSPECTION AND GRINDING, COMPRESSOR STATOR VANE ID | 1 | |
| 23055347 | FIXTURE INSPECTION FRONT COMPRESSOR SUPPORT | 1 | |
| 2313-21 | CAMERA, VIDEO INSPECTION | 1 | |
| 2683301-1 | Cessna reference standard 55-10-02-0 (Rev 1).Model 208 Inspection of Horizontal Stabilizer Spars. | 4 | |
| 27-95031-001 | Fairchild METRO 23, Model SA227-CC, METRO 23, Model SA227-DC,Reference standard for inspection of the MLG and NLG Yoke Assembly. Material: 2024-T351 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 27F-000-212-57-10-1204 | REFERENCE STANDARD FOR DYNAMIC INSPECTION | 1 | |
| 27F-2-212-57-10-1204 | REFERENCE STANDARD FOR DYNAMIC INSPECTION | 1 | |
| 284484-1-1 | Inspection Mounting Plate | 1 | |
| 29A029 | HFEC INSPECTION KALIBRASYON BLOĞU. (ALÜMINYUM) | 5 | |
| 29A032 | HFEC INSPECTION KALIBRASYON BLOĞU. (TITANYUM) | 3 | |
| 29A049 | HFEC INSPECTION KALIBRASYON BLOĞU. (PASLANMAZ ÇELIK) | 2 | |
| 2C14898G01 | SPECIAL TOOL FOR TERMOCOUPLE T44 REPLACEMENT/INSPECTION | 1 | |
| 2C15004G04 | FIXTURE, INSPECTION - DOME | 1 | |
| 2C15010G06 | FIXTURE ASSEMBLY/INSPECTION | 1 | |
| 2C15042G03 | FIXTURE,MACHINING AND INSPECTION- HPT COUP. NUT | 2 | |
| 2C15637G01 | MACHINING / INSPECTION FIXTURE | 1 | |
| 2C6515 | FIXTURE, INSPECTION- COMPR REAR SHAFT | 1 | |
| 2C6540G02 | GAGE INSPECTION COMP SPOOL | 1 | |
| 2C65I5 | FIXTURE, INSPECTION- COMPR REAR SHAFT | 1 | |
| 2C6646 | GAGE,VSV LEVER ARM INSPECTION | 1 | |
| 2C6646G01 | GAGE,VSV LEVER ARM INSPECTION | 1 | |
| 2C7048G02 | MACHINING AND INSPECTION FIXTURE | 1 | |
| 2C7332 | FIXTURE, INSPECTION-COMBUSTOR | 1 | |
| 2C7332G01 | FIXTURE, INSPECTION-COMBUSTOR | 1 | |
| 2C7512G03 | MACHINING FIXTURE, TMF LINER (MACHINING/ INSPECTION FIXTURE) | 1 | |
| 2C7669 | FIXT. MACHINING /INSPECTION - TMF LINK MOUNT | 1 | |
| 2C8036 | FIXTURE, INSPECTION - COMB. LINER ASSY | 1 | |
| 2C8036 REV B | FIXTURE, INSPECTION - COMB. LINER ASSY | 1 | |
| 2C81553G01 | FIXTURE, INSPECTION, LPTM DROP | 1 | |
| 2C91387G01 | COMBUSTOR FERRULE INSPECTION GAGE | 1 | |
| 2C91395G01 | GAGE, COMPRESSOR BLADE DOVETAIL INSPECTION | 1 | |
| 301 GUIDE | BOEING REFERENCE STANDARD GUIDE PLATE KC10 FUEL COMPENSATOR CUTOUT-INSPECTION | 1 | |
| 302 GUIDE | BOEING REFERENCE STANDARD GUIDE PLATE KC10 FUEL COMPENSATOR CUTOUT-INSPECTION | 1 | |
| 30R0508G01 | FIXTURE, INSPECTION / SIZING, IGNITER PORT-COMBUSTION CHAMBER LINER | 1 | |
| 314STD-27-0011 REV. 2 | INSPECTION AND/OR ADJUSTMENT OF THE ELEVATOR CONTROL SYSTEM BACKLASH | 1 | |
| 33-B-2 | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) | 1 | |
| 332A94-2780-01 | LATERAL DAMPER INSPECTION TOOL | 1 | |
| 332A94-3500-05 | ALIGNMENT "T.S.P.P" INSPECTION TOOL | 1 | |
| 332A94-3505-00 | POWER PLANT ALIGNMENT INSPECTION TOOL | 1 | |
| 332A94350005 | ALIGNMENT"T.S.P.P"INSPECTION TOOL | 1 | |
| 3400961-1 | SLING, AIRCRAFT MAINTENANCE (FLAP INSPECTION TOOL) | 3 | |
| 3765A96919-301 | CONAIR EDDY CURRENT SURFACE REFERENECE STANDARD. DHC-8-Q400 FOR INSPECTION OF OUTSIDE FUSELAGE CTS. ALL ALUMINUM PARTS ALODINED. Includes Test Report and Certificate of Conformance. | 1 | |
| 3765A96919-303 | CONAIR EDDY CURRENT SURFACE REFERENECE STANDARD. DHC-8-Q400 FOR INSPECTION OF OUTSIDE FUSELAGE CTS. ALL ALUMINUM PARTS ALODINED. Includes Test Report and Certificate of Conformance. | 1 | |
| 3765A96919-305 | CONAIR EDDY CURRENT SURFACE REFERENECE STANDARD. DHC-8-Q400 FOR INSPECTION OF OUTSIDE FUSELAGE CTS. ALL ALUMINUM PARTS ALODINED. Includes Test Report and Certificate of Conformance. | 1 | |
| 3780 | COMP. ROTOR INSPECTION FIXTURE | 1 | |
| 38876 | MECHANIC CREEPER CRAWL BOARD INSPECTION. | 1 | |
| 3SF6721-501 | MAGNETIC INSPECTION KIT | 1 | |
| 41603 | Ullman HTC-2 Round 2-14 Diameter High-Tech Telescoping Inspection Mirror | 1 | |
| 416M90 | INSPECTION LAMP (HELMET HEAD TORCH) | 1 | |
| 42325-980 | CABLE INSPECTION TOOL (OEM GOODRICH) | 1 | |
| 427-240-113-101 | TOOL | REQUESTED TO PERFORM A 600H INSPECTION | 1 | |
| 500.60.12.004 | WING ATTACHMENT INSPECTION KIT (PILATUS PC-12) | 1 | |
| 501-36848 | CAMERA INSPECTION | 1 | |
| 5120-892-5709 | Inspection Mirror 2 1/4 | 1 | |
| 513721 | BLACK LIGHT INSPECTION LIGHT MAGNAFLUX 2Z-24A PN 513721 | 1 | |
| 5290020-4 | Cessna Model 401/402 Calibration Standard Figure 4 part 2 & 3 Inspection. Plate A - 7075-T6 Aluminum and Plate B - 2024-T3 Aluminum. | 1 | |
| 53-70315 | ULLMAN® ALL-ANGLE INSPECTION MIRROR KIT | 1 | |
| 5515T-52 | INSPECTION MIRROR | 1 | |
| 56T103567-MIT-001 | INSPECTION PRIM KITT | 1 | |
| 57-12-501 | RIGHT AND LEFT WING REAR BEAM AT BL 35.8 — EDDY CURRENT INSPECTION CALIBRATION STANDARD, 1159W40007-1NDT (GULFSTREAM) | 1 | |
| 57-12-502 | RIGHT AND LEFT WING REAR BEAM AT RBS 103.3 — EDDY CURRENT INSPECTION PROBE :SPO 5053 PROBE :SPO 5054 CALIBRATION STANDARD, 1159W40005-1NDT (GULFSTREAM | 1 | |
| 57-12-504 | RIGHT AND LEFT WING REAR BEAM AT RBS 230.1 — EDDY CURRENT INSPECTION CALIBRATION STANDARD, 1159W40063-1NDT (GULFSTREAM | 1 | |
| 6201-FE159-5-304 | SNAP RING ASSEMBLY INSPECTION TOOL | 1 | |
| 623529 | Magnaflux Inspection Kit, 115 V, 3.7 A, 60 Hz | 1 | |
| 623530 | KIT: INSPECTION YOKE,Y-1 MV,230V/60HZ, | 2 | |
| 628243 | Magnaflux ST700 Stationary Inspection LED UV Lamp 628243, 100– 240 Vac | 2 | |
| 6583103-1 | Cessna Model 500 Calibration Standard 53-30-03-0 Rev. 14 Figure 4 Sheet 1 Inspection. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 6797017 | INSPECTION FIXTURE - COMP ROTOR | 1 | |
| 6797642 | PLATE, CLAMP, BRG. INSPECTION | 1 | |
| 6797651 | PLATE, CLAMP, BRG. INSPECTION | 1 | |
| 6798230 | RINGS- INSPECTION, COMP. STATOR | 1 | |
| 68-1270-1 | TOP AND BOTTOM PLATES FOR THE GREASE SEAL INSPECTION | 1 | |
| 68-1271-1 | TOP AND BOTTOM PLATES FOR THE INNER GREASE SEAL INSPECTION | 2 | |
| 8493 | CENTRIFUGE TUBE, MAGNETIC INSPECTION | 4 | |
| 6877022 | IN-PROCESS INSPECTION FIXTURE USED TO MEASURE CRITICAL DIMENSIONS DURING DISASSEMBLY AND REPAIR OPERATIONS. | 1 | |
| 69-058 | INSPECTION MIRROR FOR CYLINDER THREADS( 3/8" DIAMETER) | 1 | |
| 69-075 | OPTICAL PLUS THREAD MAGNIFIER ( FOR CYLINDER THREAD INSPECTION ) | 1 | |
| 7110561 | BORESCOPE - INSPECTION, FLEXIBLE 6 MM | 1 | |
| 7502152 | LIGHT SOURCE - BORESCOPE, APU INSPECTION, MODEL ILH-2A | 1 | |
| 77401040 | MIRROR - INSPECTION | 1 | |
| 77401045 | INSPECTION MIRROR | 1 | |
| 80RS10 | Ultrasonic Inspection Reference standard MD-80 | 2 | |
| 80RS14 | Ultrasonic Inspection Reference standard MD-80 | 2 | |
| 80RS15 | Ultrasonic Inspection Reference standard MD-80 | 2 | |
| 80RS18 | Ultrasonic Inspection Reference standard MD-80 | 2 | |
| 80RS19 | Ultrasonic Inspection Reference standard MD-80 | 1 | |
| 80RS21 | Ultrasonic Inspection Reference standard MD-80 | 2 | |
| 80RS22 | Ultrasonic Inspection Reference standard MD-80 | 3 | |
| 80RS4 | Ultrasonic Inspection Reference standard MD-80 | 1 | |
| 80RS6 | Ultrasonic Inspection Reference standard MD-80 | 2 | |
| 80RS7 | Ultrasonic Inspection Reference standard MD-80 | 1 | |
| 81101-R815505 | INSPECTION ZONE TEMPLATES (FACE SIDE) | 1 | |
| 81102-R815505 | INSPECTION ZONE TEMPLATES (CAMBER SIDE) | 1 | |
| 81602-R815505-0001 | INSPECTION ZONE TEMPLATE (FACE SIDE) | 1 | |
| 81602-R815505-0002 | INSPECTION ZONE TEMPLATES (CAMBER SIDE) | 1 | |
| 81602-R815505-001 | INSPECTION ZONE TEMPLATE | 1 | |
| 81602-R815505-002 | INSPECTION ZONE TEMPLATE | 1 | |
| 831000-1 | GAGE ASSEMBLY SET, "P" POINT INSPECTION | 1 | |
| 834A.RT | INSPECTION MIRROR | 1 | |
| 85694200G04 | FIXTURE INSPECTION - COMBUSTOR ASSEMBLY (INSPECTION FIXTURE) | 1 | |
| 856A-5649-G01 | Mirror, Fan Disk Inspection | 9 | |
| 856A1050G04 | Fixture, Inspection Shimming IGB (inspection fixture) | 3 | |
| 856A1050P33 | FIXTURE, INSPECTION SHIMMING IGB (INSPECTION FIXTURE) | 1 | |
| 856A1809G01 | CFM56-7 BLADE CHORD INSPECTION GAGE | 5 | |
| 856A2692G01 | EDDY CURRENT INSPECTION, KIT FOR CFM56-7B TRF | 1 | |
| 856A2692G03 | EDDY CURRENT INSPECTION KIT OF REAR FRAME | 1 | |
| 856A2692G04 | EDDY CURRENT INSPECTION KIT OF REAR FRAME | 1 | |
| 856A3626G01 | INSPECTION KIT - FAN FRAM AFT | 1 | |
| 856A3629 | GAUGE INSPECTION BLADE MIDSPAN SHROUD AREA | 1 | |
| 856A3629P02 | GAGE - INSPECTION, UNACCEPTABLE SCALING AREA - CFM56-3 ENGINE | 11 | |
| 856A3929G01 | TOOL, INSPECTION - DIMENSION ZP | 4 | |
| 856A3929G02 | INSPECTION TOOL, DIMENSION ZP - LPT | 4 | |
| 856A3929G03 | INSPECTION TOOL, DIMENSION ZP - LPT | 2 | |
| 856A3953G01 | V-GROOVE INSPECTION KIT - FAN FRAME | 1 | |
| 856A4009G04 | FIXTURE, INSPECTION COMBUSTOR | 1 | |
| 856A4009G05 | FIXTURE,INSPECTION-COMB.ASSY, | 1 | |
| 856A4200 | (RT) FIXTURE, INSPECTION-COMBUSTOR | 1 | |
| 856A4200G02 | FIXTURE, INSPECTION - COMBUSTOR ASSEMBLY | 1 | |
| 856A4200G04 | FIXTURE, INSPECTION-COMBUSTOR ASSY | 1 | |
| 856A4201G02 | Fixture, Assembly & Inspection | 1 | |
| 856A4627G03 | FAN DISC INSPECTION MIRROR SET | 5 | |
| 856A4628G01 | Tool-Inspection,pressure faces,dovtail,Fan blade,missing coating, inch units only | 9 | |
| 856A4628G02 | TOOL- INSPECTION, PRESSURE FACES, DOVETAIL, FAN BLADE, MISSING COATING, MM UNITS | 8 | |
| 856A4633G02 | TOOL - INSPECTION, PRESSURE FACES, DOVETAIL, FAN BLADE, MISSING COATING, MM UNITS | 13 | |
| 856A4637G01 | INSPECTION TOOL - BOOSTER SPOOL FORWARD FLANGE - CFM56-7B | 9 | |
| 856A4641G02 | V-GROOVE INSPECTION KIT - FAN FRAME | 1 | |
| 856A4641G03 | V-GROOVE INSPECTION KIT - FAN FRAME | 2 | |
| 856A5649 | MIRROR INSPECTION - FAN DISK DOVETAIL | 1 | |
| 856A5649 REV A | MIRROR INSPECTION-FAN DISK DOVETAIL SLOTS | 1 | |
| 856A5649G01 | MIRROR INSPECTION-FAN DISK | 9 | |
| 856A5649G02 | Mirror Inspection | 1 | |
| 856A5684G02 | TOOL SET, INSPECTION - FAN DISK INSIDE DIAMETER | 1 | |
| 856A5684G05 | TOOL SET, INSPECTION - FAN DISK INSIDE DIAMETER | 1 | |
| 856A5908G06 | DIM. INSPECTION PROGRAME DATA DISK | 1 | |
| 856A5911G01 | CFM FAN BLADE INSPECTION TOOL | 1 | |
| 88308 | PRISM − WINDOW INSPECTION | 1 | |
| 8814768000 | INSPECTION TEMPLATE ASSY FOR AXIAL COMPRESSOR BLADES | 1 | |
| 8816500000 | INSPECTION LAMP | 1 | |
| 8817568000 | CHECK AND ADJUSTMENT OF STATIC DROOP LAW - INSPECTION / CHECK | 2 | |
| 885N | PITOT TIP DAMAGE INSPECTION KIT | 2 | |
| 889500-03 | WINDOW INSPECTION PRISMA KIT | 1 | |
| 8G6430G09631 | TAIL ROTOR DAMPER INSPECTION TOOL | 1 | |
| 8MK4916-001 | KIT, INSPECTION/REPAIR, MAIN LANDING GEAR | 1 | |
| 956A1803 | FIXTURE - INSPECTION - NO 3 DAMPER | 1 | |
| 956A3512 | FIXTURE - INSPECTION - NO 3 DAMPER | 1 | |
| 956A8080G01 | GUIDE, BORESCOPE INSPECTION - BOOSTER OPTIONAL VIDEOSCOPE (4 OR 6MM FLEXIBLE) 1 | 2 | |
| 9700 | Inspection Mirrors | 1 | |
| 98669 | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| 98A27003001000 | DETAILED INSPECTION OF FREE-FALL MECHANISM INCLUDING CABLES | 29 | |
| 98A27801001000 | DETAILED INSPECTION OF FREE-FALL MECHANISM INCLUDING CABLES | 23 | |
| 98A35207599000 | FUNCTIONAL CHECK OF AUTOMATIC MASK RELEASE, DETAILED INSPECTION OF MASKS AND VISUAL CHECK OF CHEMICAL OXYGEN GENERATORS | 25 | |
| 98A53803021242 | T/K 571051T01 CRUCIFORM INSPECTION FIND' | 1 | |
| 98A54403024000 | ADAPTER - DYNAMOMETRIC, N1 FOR INSPECTION/CHECK | 8 | |
| 98D27303003001 | AILERON, ELEVATOR, RUDDER INSPECTION TOOL (SIMULATION) | 24 | |
| 98D27303022000 | AILERON, ELEVATOR, RUDDER INSPECTION TOOL (SIMULATION) | 19 | |
| 98L53509016000 | PLATFORM-INSPECTION, S19 AND S19.1 | 3 | |
| 98S53805002-000 | ATR REFERENCE STANDARD 53-61-18 PT 6 FIGURE 603 PAGE 609. INSPECTION OF REAR PRESSURE BULKHEAD PERIPHERY OF DOME SKIN AND CONNECTION WITH VERTICAL FLANGE OF DOME VERTICLAL CHORD. Includes Test Report traceable to NIST and Certificate of Conformance. | 6 | |
| 98S57105035200 | Clamps Inspection Wing Box | 2 | |
| 98V53509001000 | BULKHEAD INSPECTION PLATFORM | 4 | |
| 99A53307292001 | INSPECTION FOR SHALLOW CRACKS IN MULTI-LAYERED JOI | 4 | |
| 99A57103057000 | LHS REPORTING TEMPLATE FOR NDT INSPECTION KIT | 1 | |
| 99A57103057009 | "LHS REPORTING TEMPLATE FOR NDT INSPECTION KIT | 1 | |
| 99D51407291001 | INSPECTION OF CARBON FIBER MONOLITHIC STRUCTURE | 7 | |
| 99D54503005000 | TOOLKIT ENGINE MOUNT BOLT HFEC INSPECTION | 1 | |
| 99D55109001000 | INSPECTION OF CARBON FIBER MONOLITHIC STRUCTURE | 7 | |
| 99F53303101000 | AIRBUS A330 REFERENCE BLOCK 53-30-52-991-003-A. MATERIAL: 7050 OR EQUIVALENT ALUMINUM. US INSPECTION OF MAIN LONGERON EXTENSION BETWEEN FR53.2 AND FR53.3. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F53303115000 | AIRBUS REFERENCE STANDARD A330 53-30-54 PAGE 6. US INSPECTION OF FUSELAGE INTERNAL STRUCTURE, SKIN PANEL JUNCTION WITH FR53.2 BULKHEAD FWD FACE BETWEEN STR39 AND STR42. Includes Test Report and Certificate of Conformance. | 3 | |
| 99F54503003000 | TOOL KIT INSPECTION NTM | 2 | |
| 99F54503008000 | TOOL KIT INSPECTION NTM | 2 | |
| 99F57204174000 | AIRBUS REFERENCE STANDARD A330 57-20-46-991-005-A PAGE 13. US INSPECTION OF OUTER WING REAR SPAR FWD FACE BETWEEN RIB 7 AND RIB 12 INCLUDING TOP AND BOTTOM FLANGES Includes Test Report and Certificate of Conformance. | 2 | |
| 99F57204175000 | AIRBUS REFERENCE STANDARD A330 57-20-46-991-005-A PAGE 13. US INSPECTION OF OUTER WING REAR SPAR FWD FACE BETWEEN RIB 7 AND RIB 12 INCLUDING TOP AND BOTTOM FLANGES Includes Test Report and Certificate of Conformance. | 2 | |
| 99F57204176000 | AIRBUS REFERENCE STANDARD A330 57-20-46-991-005-A PAGE 13. US INSPECTION OF OUTER WING REAR SPAR FWD FACE BETWEEN RIB 7 AND RIB 12 INCLUDING TOP AND BOTTOM FLANGES Includes Test Report and Certificate of Conformance. | 2 | |
| 99F57204177000 | AIRBUS REFERENCE STANDARD A330 57-20-46-991-005-A PAGE 13. US INSPECTION OF OUTER WING REAR SPAR FWD FACE BETWEEN RIB 7 AND RIB 12 INCLUDING TOP AND BOTTOM FLANGES Includes Test Report and Certificate of Conformance. | 2 | |
| 9C1700G02 | WRENCH - ADAPTER SPECIAL TOOL FOR VARIBLE STATOR VINE VALVE (VSV) ACTUATOR COMPONENTS REPLACEMENT AND IGV, VSV INSPECTION | 3 | |
| 9C3124G01 | CLASS 6 LOW PRESSURE TURBINE ROTOR BLADE INSPECTION EQUIPMENT | 1 | |
| 9C3124G03 | TORQUEMETERCLASS 6 LOW PRESSURE TURBINE ROTOR BLADE INSPECTION EQUIPMENT | 2 | |
| 9C3124P14 | SB-72526 INTER LOCK WEAR INSPECTION CAM FOR COMPLYING GE90 SB 72-526 & 72-633. | 2 | |
| 9PR50A | REMOVER , INSPECTION PENETRANT | 1 | |
| 9RS12 | Ultrasonic Inspection Reference standard MD-80 | 2 | |
| 9RS17 | Ultrasonic Inspection Reference standard MD-80 | 2 | |
| 9RS22 | Ultrasonic Inspection Reference standard MD-80 | 1 | |
| A-2 | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| A-2HD | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| A-2TM | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| A-A-58049-II | MAGNETIC INSPECTION | 1 | |
| A/C D/C YOKE | PORTABLE MAGNETIC PARTICLE INSPECTION EQUIPMENT | 1 | |
| A01012-E | LOADMASTER 3600 INSPECTION TOOL - I-BOLTS | 1 | |
| A1M-B737-GE | GEOMETRIC INSPECTION EQUIPMENT | 1 | |
| A1M-CS-GE | GEOMETRIC INSPECTION EQUIPMENT | 1 | |
| A1M-CS-KITNC | GEOMETRIC INSPECTION EQUIPMENT | 1 | |
| A1M-EMB170-GE | TEMPLATES MYLAR, RVSM INSPECTION | 2 | |
| A1M-G280-GE | GEOMETRIC INSPECTION GAGING EQUIPMENT | 1 | |
| A1M-GAL-GE | GEOMETRIC INSPECTION GAGING EQUIPMENT | 1 | |
| A1M-GAL-KITNC | GEOMETRIC INSPECTION GAGING EQUIPMENT | 1 | |
| A1M-L500-KITNC | Tool, Geometric Inspection | 2 | |
| A1M-L500A-KITNC | Tool, Geometric Inspection | 2 | |
| A1M-L500B-KITNC | TOOL, GEOMETRIC INSPECTION | 1 | |
| A1M-L500C-KITNC | GEOMETRIC INSPECTION TOOL | 1 | |
| A1M-LJ-GE | GEOMETRIC INSPECTION EQUIPMENT | 1 | |
| A1M-P100-KIT | TOOL, GEOMETRIC INSPECTION | 1 | |
| A1M-P100-KITNC | GEOMETRIC INSPECTION TOOL | 3 | |
| A1M-P100A-KITNC | GEOMETRIC INSPECTION TOOL | 1 | |
| A1M-P100B-KIT | RVSM INSPECTION TOLL | 1 | |
| A1M-P100B-KITNC | GEOMETRIC INSPECTION TOOL | 2 | |
| A1M-P100C-KIT | GEOMETRIC INSPECTION TOOLPURPOSE | 1 | |
| A1M-P300-KIT | GEOMETRIC INSPECTION TOOL | 2 | |
| A1M-P300-KITNC | GEOMETRIC INSPECTION TOOL | 1 | |
| A1M-P300A-KIT | GEOMETRIC INSPECTION TOOL | 1 | |
| A1M-P300A-KITNC | GEOMETRIC INSPECTION TOOL | 2 | |
| A1M-P300B-KIT | RVSM INSPECTION TOLL | 1 | |
| A1M-P300B-KIT(NC) | GEOMETRIC INSPECTIONTOOL | 2 | |
| A1M-P300B-KITNC | GEOMETRIC INSPECTION RSVM (WAVINESS) | 2 | |
| A1M-P300BKITNC | TOOL, GEOMETRIC INSPECTION - NO COMPUTER | 2 | |
| A1M-P300C-KITNC | GEOMETRIC INSPECTION TOOL | 1 | |
| A1M-P3A-KITNC | TOOL, GEOMETRIC INSPECTION - NO COMPUTER | 1 | |
| A1ML500B-KITNC | TOOL GEOMETRIC INSPECTION | 1 | |
| A20004-72 | INSPECTION EQUIPMENT, ELEVATOR FREEPLAY | 3 | |
| A20004-78 | INSPECTION EQUIPMENT, ELEVATOR FREEPLAY | 23 | |
| A25020-8 | GAGE - INSPECTION, SEAT TRACK, FLIGHT CREW (THE BOEING COMPANY) | 25 | |
| A27003-23 | INSPECTION EQUIPMENT, ELEVATOR FREEPLAY | 17 | |
| A330SB72C954 | A330 INSPECTION OF HYD PUMP STUDS | 1 | |
| A5015-5MHZ45 | AIRBUS 320 LERDE ÇIKAN ACTUATOR FITTING FOR MLG DOORS KEEL BEAM INSPECTION IÇIN GEREKLI TRANSDUSER | 1 | |
| ADA412-723 | PITOT SYSTEM INSPECTION AUXILIARY TOOL | 4 | |
| ADH-2045 | MAGNETIC PARTICLE INSPECTION WET BENCH UNIT | 1 | |
| AF-5088 | CUSTOM ABSOLUTE EDDY CURRENT SLIDING PROBE, .375" RADIUS WITH .120" WIDE FIN FOR GROOVE INSPECTION, SUPPLIED WITH A TOP MOUNTED TRIAX FISCHER CONNECTOR 25-100KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5113 | Custom Eddy Current Probe for clamp inspection grooves. Frequency 500KHz-1MHz. Triax Fischer connector, Reflection. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5116/1MHZ | CUSTOM S-SHAPED FLEXIBLE SURFACE PROBE FOR LOWER SURFACE FLAP TRACK INSPECTION. 500KHz-2MHz, 7.0" LONG WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5124/1MHZ | CUSTOM L-SHAPED FLEXIBLE SURFACE PROBE FOR LOWER SURFACE FLAP TRACK INSPECTION. 500KHz-2MHz, 7.0" LONG WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5125/1MHZ | CUSTOM J-SHAPED FLEXIBLE SURFACE PROBE FOR LOWER SURFACE FLAP TRACK INSPECTION. 500KHz-2MHz, 7.0" LONG WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5145 | Custom Rotary Probe for Radiused Hole Inspection100KHz-2MHz., .250"Ø 4 Pin Fischer Connector with 2.0: working Length. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5150 | CUSTOM BOLT PROBE FOR A286 STEEL, HEAD-TO-SHANK "FILLET" INSPECTION. FREQUENCY 500KHz-1MHz. | 1 | |
| AF-5165 | CUSTOM DUAL COIL EDDY CURRENT PROBE FOR GROOVE INSPECTION, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. REFERENCE: SLS-CRES-60D-GRV. | 1 | |
| AFC-K1SM | 1.0 MHz 1.0 inch diameter element straight beam compression transducer used for the inspection of composite materials. | 2 | |
| AFK-1017 | Custom Eddy Current Inspection Kit. Includes the following probes, Reference Standard and cables.AUR-.125SE/1.75WL-LF, AUR-.156SE/1.75WL-LF, AUR-.187SE/1.75WL-LF, AUR-.250SE/2.0WL-LF, AUR-.312SE/2.0WL-LF, AUR-.375SE/2.0WL-LF, AUR-.437SE/2.0WL-LF, AUR-... | 1 | |
| AFK-1030 | Cusom Ultrasonic Inspection Kit for Boeing 787. Kit contents include: NDT815 reference standard. Transducer part numbers: AFS-0570-1R, AFS-0570-1L, AFS-0570-2R, AFS-0570-2L, AFS-0570-3R, AFS-0570-3L, AFS-0570-4R, AFS-0570-4L, AFS-0570-5R, AFS-0570-5L | 1 | |
| AFK-EC-BH16 | Boeing Part 6 51-00-00 Proceedure 16 Eddy Current Bolt Hole Inspection Kit. Includes 15 Universal Rotating Split End scanner probes Supplied with a with a Universal 4 Pin Fischer Connector and 1 Calibration Standard with hole sizes ranging from .187"Ø to | 1 | |
| AFK-UTASW10-12 | ULTRASONIC ANGLE BEAM TRANSDUCER KIT. CONSISTS OF A QUANTITY OF 12 10 MHz TRANSDUCERS WITH MICRODOT CONNECTORS FOR INSPECTION OF ALUMINUM SURFACES. Includes Test Report and Certificate of Conformation. Custom fitted waterproof Kit Box Included. Kit Pa | 1 | |
| AFK-UTASW5-12 | ULTRASONIC ANGLE BEAM TRANSDUCER KIT. CONSISTS OF A QUANTITY OF 12 5 MHz TRANSDUCERS WITH MICRODOT CONNECTORS FOR INSPECTION OF ALUMINUM SURFACES. Includes Test Report and Certificate of Conformation. Custom fitted waterproof Kit Box Included. Kit Pa | 1 | |
| AFNDT-3164AL | Custom NDI standard for F-15C/D inspection. Material: 2124-T8 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3264 | Custom Reference Standard for the Boeing Lead Screw inspection, equivalent to 7903385. Material: 4150 Alloy Steel, 1.5 Outside Diameter and 1.069" Inside Diameter with 3 EDM Flaws per BSS 7048 page 2 Table 1. Includes Test Report and Certificate of Confor | 1 | |
| AFNDT-3395 | CUSTOM EC SKIN INSPECTION REFERENCE STANDARD. Contains various EDM Nothes in the Upper and Lower Skin. Upper Skin Thickness of .080" and Lower Skin Thickness of .100" Thick. Standard Physical Size = 13.5" Long x 5.15" Wide. MATERIAL: 2024-T3 ALUMINUM. I | 1 | |
| AFS-0528 | 42.5° SHEAWAVE TRANSDUCER, 5MHZ OUTER LUG INSPECTION, LOW PROFILE SIDE MOUNT CONNECTOR | 1 | |
| AFS-0540 | CUSTOM SPRING LOADED TRANSDUCER WITH COLLAR FOR C-130 FUSELAGE SP-78 INSPECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1012 | CUSTOM 10MHZ, 73° SHEAR WAVE TRANSDUCER. BOEING 727 UT INSPECTION FOR 57-10-27. | 1 | |
| AFS-1036 | CUSTOM 5MHZ 45° SHEAR WAVE TRANSDUCER (TEK-5086) .BOEING 767 UT INSPECTION FOR 57-20-04. | 1 | |
| AFS-1346 | CUSTOM 2 ELEMENT RING TRANSDUCER FOR BORE HOLE INSPECTION WITH BOEING REFERENCE STANDARD 55-10-13 PAGE 9 FIGURE 2. TWO MICRODOT CONNECTORS "A" and "B" | 1 | |
| AFW-70SA4.063R | CUSTOM ACRYLIC WEDGE WITH AN AXIAL RADIUS (CONVEX) OF 4.063" AT 70° IN STEEL, 3/8-32 THREAD FOR PIPE ID INSPECTION. | 1 | |
| AFW-70SC4.063R | CUSTOM ACRYLIC WEDGE W/ITH AN CIRCUMFERENTIAL RADIUS (CONVEX) OF 4.063" AT 70° IN STEEL, 3/8-32 FOR PIPE INSPECTIONTHREAD | 1 | |
| AFW25-23 | 23 DEGREE LONGITUDINAL LUCITE WEDGE WITH 3/8"-32 THREAD FOR 1/4" ELEMENT THREADED TRANSDUCERS. FOR BELL HELICOPTER 212 MAIN ROTOR GRIP INSPECTION | 1 | |
| AID-01383 | IMPELLER BLADE INSPECTION AID | 1 | |
| AMS 2641 TY I | MAGNETIC-PARTICLE INSPECTION VEHICLE | 1 | |
| AP-350P1A/200K | HOCKING DELRIN 65° ANGLED KNIFE PROBE FOR THREAD INSPECTION, UNSHIELDED, 50-500KHz, 5.0 INCES LONG SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| APN2786-S52-1 | INSPECTION GAUGE AVOX SYSTEMS (SAFRAN) | 1 | |
| AQBK01 | INSPECTION CAMERA SYSTEM | 1 | |
| AS350.000.046 | INSPECTION TEMPLATE FOR TAIL ROTOR BLADES | 1 | |
| ASC-0513 | CUSTOM TRANSDUCER USED FOR THE DC10 BANJO INSPECTION | 1 | |
| AT-097705 | MOLD INSPECTION ASSIST TOOL | 1 | |
| AURCB-.156SS/1.5WL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER COUNTERBORE PROBE FOR SURFACE INSPECTION, (5/32" - 3/16")100KHz-2MHz, 4 PIN FISCHER CONNECTOR,1.5" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AURCB-.187SS/1.5WL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER COUNTERBORE PROBE FOR SURFACE INSPECTION, (3/16" - 7/32")100KHz-2MHz, 4 PIN FISCHER CONNECTOR,1.5" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AVEE001 | SMARTSCAN-FA, KAVEE001,OTHER PN REGARDING AUTOMATIC WHEEL INSPECTION | 1 | |
| AWR-P17 | KIT INSPECTION PRISM | 1 | |
| AZL02520-R00 | ROHMANN / GFORCE UTBT - ULTRASONIC INSPECTION EQUIPMENT | 1 | |
| B-2 | ULLMAN B-2 INSPECTION MIRROR | 6 | |
| B-2HD | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| B-2R | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| B-2TM | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| B1642301 | TOOL, VIDEO BORESCOPE/WIRELESS INSPECTION CAMERA | 1 | |
| BAT-553 | Inspection / Magnifier Light | 1 | |
| BAT-80560 | Lighted Telescoping Inspection Mirror | 1 | |
| BK6500 | SNAP-ON DIGITAL INSPECTION CAMERA | 3 | |
| BM-KIT-MIA | BONDMASTER PROBE AND STANDARD KIT FOR MIA INSPECTIONS | 1 | |
| BM-KIT-PC2 | BONDMASTER PROBE AND STANDARD KIT FOR PITCH-CATCH INSPECTIONS | 1 | |
| BM-KIT-RES-A | BONDMASTER PROBE AND STANDARD KIT FOR RESONANCE INSPECTIONS | 1 | |
| BM-KIT-RES-C | BONDMASTER PROBE AND STANDARD KIT FOR RESONANCE INSPECTIONS | 1 | |
| BR250 | VIDEO BORESCOPE/WIRELESS INSPECTION CAMERA | 1 | |
| BSM-2 | 2" Round Inspection Mirror - SPECIAL BUY! | 1 | |
| C-2 | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 4 | |
| C-2HD | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| C-2M | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| C-2MHD | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| C-2ML | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| C130 MLG TORQUE STRUT INSPECTI | C130 MLG TORQUE STRUT INSPECTION KIT | 1 | |
| C27104-1 | Inspection tool-speedbrake mechanism，dual load path shaft | 1 | |
| C27104-14 | INSPECTION TOOL - SPEEDBRAKE MECHANISM, DUAL LOAD PATH SHAFT | 2 | |
| CA-100 | CAMERA INSPECTION | 1 | |
| CASE 13 | OLYMPUS BORESCOPE INSPECTION KIT VCR UNIT P/N B4HAO6845 VHS CAMERA P/N VX303E S/N WKL3AO326 | 1 | |
| CAT1000P | Mitutoyo CAT1000P - CAT-1000P - CAD to Inspection Software | 1 | |
| CBG-18-0-N-1 | DIMENSIONAL INSPECTION GAUGE, MADE OF STANDARD METAL, USED DURING AIRCRAFT REPAIRS. | 3 | |
| CBG-18-1-N-1 | DIMENSIONAL INSPECTION GAUGE, MADE OF STANDARD METAL, USED DURING AIRCRAFT REPAIRS. | 2 | |
| CCY19304 | G20 INSPECTION BEAM | 1 | |
| CE9900082-101 | INFRARED THERMOGRAPHY INSPECTION FOR WATER INGRESS IN COMPOSITE SANDWICH COMPONENTS WITH CRFP SKINS - THERMOGRAPHIC TEST | 1 | |
| CE9900430-001 | SANDWICH PANEL ASSEMBLY FOR ULTRASONIC INSPECTION | 1 | |
| COUPON 12 | PEMCO WORLD AIR SERVICES EDDY CURRENT LOW FREQUENCY STANDARD. COUPON FOR USE WITH INSPECTION ED-3. 05-30-10 PG.193. Includes Certification Report Tracable to NIST. | 1 | |
| COUPON 2 | PEMCO WORLD AIR SERVICES EDDY CURRENT LOW FREQUENCY STANDARD. COUPON FOR USE WITH INSPECTION ED-4. 05-30-10 PG.190. Includes Certification Report Tracable to NIST. | 1 | |
| COUPON 25 | PEMCO LOW FREQUENCY EDDY CURRENT STANDARD FOR INSPECTION UJ-1. 05-30-10 PAGE 194. EDM NOTCH: .030 MAX WIDTH x .240" LONG. Includes Certification Report Tracable to NIST. | 1 | |
| COUPON 29 | PEMCO WORLD AIR SERVICES EDDY CURRENT LOW FREQUENCY STANDARD. COUPON FOR USE WITH INSPECTION ED-3 and ED-4. 05-30-10 PG.195. Includes Certification Report Tracable to NIST. | 1 | |
| COUPON 3 | PEMCO WORLD AIR SERVICES EDDY CURRENT LOW FREQUENCY STANDARD. COUPON FOR USE WITH INSPECTION ED-3. 05-30-10 PG.191. Includes Certification Report Tracable to NIST. | 1 | |
| COUPON 31 | PEMCO WORLD AIR SERVICES EDDY CURRENT LOW FREQUENCY STANDARD. COUPON FOR USE WITH INSPECTION ED-5. 05-30-10 PG.196. Includes Certification Report Tracable to NIST. | 1 | |
| COUPON 6 | PEMCO WORLD AIR SERVICES EDDY CURRENT LOW FREQUENCY STANDARD. COUPON FOR USE WITH INSPECTION ED-5. 05-30-10 PG.192. Includes Certification Report Tracable to NIST. | 1 | |
| CTA-9450 | INSPECTION MIRRIOR | 1 | |
| CTA-9452 | INSPECTION MIRRIOR | 1 | |
| CTE8003 | SYSTEM, BORESCOPE INSPECTION | 2 | |
| CVR-F-04-002 | COVER-INSPECTION CAM, R | 1 | |
| D5 DIN2250 C | INSPECTION GAUGE 4.9995mm | 1 | |
| DA76530 | Klenk Tools DA76530 Acrylic Face 34 x 2-12 Pocket-Style Telescoping Inspection Mirror with Magnetic Pickup | 1 | |
| DCS2000 | BORSCOPE/ INSPECTION CAMERA | 1 | |
| DOLPHICAM DC-CF08-EXPERT COMPOSITE INSPECTION SYSTEM | DOLPHICAM DC-CF08-EXPERT COMPOSITE INSPECTION SYSTEM - CARBON FIBRE INSPECTION SYSTEM, SUITABLE FOR CARBON FIBRE UP TO 8MM THICKNESS, AMPLITUDE AND TIME-OF-FLIGHT REPORTING, A-SCAN, B-SCAN & C-SCAN, INCLUDES TOUCHSCREEN LAPTOP | 1 | |
| DTS.2B | INCLINE COMFORT INSPECTION + WORK CREEPER | 1 | |
| DZZ7352-1 | COMPENSING PLATE INSPECTION FIXTURE | 6 | |
| Dolphicam DC-CF08-Expert Composite Inspection System | Dolphicam DC-CF08-Expert Composite Inspection System - Carbon Fibre Inspection System, Suitable for carbon fibre up to 8mm thickness, Amplitude and Time-of-flight reporting, A-Scan, B-Scan & C-Scan, Includes touchscreen laptop | 1 | |
| E-2 | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| E-2HD | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| E-2TM | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| E22 | INSPECTION MIRROR | 1 | |
| ECPRI042G | MINI INSPECTION LIGHT GRN | 1 | |
| ECPRI042O | MINI INSPECTION LIGHT ORG | 1 | |
| EDDY CURRENT TURBINE REAR FRAM | FRAME INSPECTION KIT | 1 | |
| EKZ-0201015810000 | HST INSPECTION LIGHT- LAMP | 1 | |
| ELO TEST B1.3 SDM VERSION 2.04 | EDDY CURRENT METHOD INSPECTION TESTER | 1 | |
| ELOWHEEL 1000 | WHEEL-INSPECTION SYSTEM | 1 | |
| ELOWHEEL-1000 | TESTING SYSTEM,EDDY CURRENT INSPECTION | 1 | |
| EPOCH 4B | INSTRUMENT - ULTRASONIC INSPECTION KIT | 1 | |
| EPOCH 600 | ULTRASONIC INSPECTION EQUIPMENT OLYMPUS | 1 | |
| EPOCH III | INSTRUMENT - ULTRASONIC INSPECTION KIT | 1 | |
| EPOCH LTC | Instrument - Ultrasonic Inspection Kit | 1 | |
| EPOCH XT | INSTRUMENT - ULTRASONIC INSPECTION KIT | 1 | |
| ET002 | Brantly International B-2 Main Rotor Blade root skin inspection Fig1 calibration standard | 1 | |
| ETD:GPO-0253/2018 | EMB-314500142_FAE-1014 – RUDDER TRIM TAB HINGE INSPECTION | 1 | |
| EXBC670-59089-001 | CALIBRATION REFERENCE STANDARD SIMILAR IN MATERIAL AS THE INSPECTION AREA CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES, (MHIRJ) | 1 | |
| EXBC670-59089−001 | CALIBRATION REFERENCE STANDARD SIMILAR IN MATERIAL AS THE INSPECTION AREA CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670−59089−001 | Calibration reference standard similar in material as the inspection area containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EddyFi Ectane (E128RNMI) Base Unit | EddyFi Ectane (E128RNMI) Base Unit - Multi-technology for tube inspections: ECT, RFT, NFT, MFL, and array equivalents, and IRIS ultrasound technology, Plug-and-play connectivity | 1 | |
| FBP-MTS-101 | FBP-MTS-101;Kit MTS Inspection Ad Analysis P5000I Probe Fibercheckpro SW Case Includes 7 Tips | 1 | |
| FBP-SD01 | INSPECTION PROBE - FIBER OPTIC (USED WITH LAPTOP COMPUTER AS SCREEN DISPLAY) | 1 | |
| FBP-SD101 | INSPECTION PROBE - FIBER OPTIC (USED WITH LAPTOP COMPUTER AS SCREEN DISPLAY) | 2 | |
| FBP-SD41-PRO | SMARTCLASS HD4I PRO FIBER OPTIC INSPECTION KIT, GSE 2020555 | 1 | |
| FBPT-A801-2001R | GUIDE - INSPECTION, FIBER OPTIC, LRU (AGU, ISSC, NRS, CCR, CSSC, EFB EU, EFB DU, NIM, DPC, CABLE INTERCONNECTS) | 3 | |
| FBPT-MIL-2P-X | FBPT-MIL-2P-X;InspINSPECTION TIP FBPT-MIL-2P MODIFIED TO 0.064 INCH BORE1--REV01 | 1 | |
| FBPT-MT999 | FBPT-MT999;Inspection Tip - 38999 MT - Pins | 1 | |
| FBPT-U12M | PATCH CORD TIP - INSPECTION, FIBER OPTIC (1.25 MM GENERIC LC) | 2 | |
| FBPT-UGMT | FBPT-UGMT;Universal Ribbon Inspection Tip MM for FBP | 1 | |
| FBPT-UGMTA | FBPT-UGMTA;Universal Ribbon Inspection Tip SM for FBP | 1 | |
| FCPT-UGMT | FCPT-UGMT;Universal Ribbon Inspection Tip MM for Sidewinder | 1 | |
| FCPT-UGMTA | FCPT-UGMTA;Universal Ribbon Inspection Tip SM for Sidewinder | 1 | |
| FF870DR | BORESCOPE INSPECTION (LEONOX INSTRUMENT) | 1 | |
| FLUKE87V | MULTIFUNCTIONAL DIGITAL MULTIMETER FOR BASIC INSPECTION OF ELECTRICAL SYSTEMS | 13 | |
| G125 | IN SERVICE INSPECTION GAUGE (MS22520/3-1) | 10 | |
| G27041 | INSPECTION GAUGE - CONNECTOR ENGAGEMENT | 1 | |
| G32-11-01-2B | MLG AXLE INSPECTION TOOL | 1 | |
| G52030-1 | MAINTENANCE PIN - SWINGZONE DOOR HINGE PIN, INSPECTION | 1 | |
| G600-560001-1 | PRISM, WINDOW INSPECTION | 4 | |
| GA1294 | INSPECTION MIRROR | 1 | |
| GA15B | INSPECTION MIRROR | 1 | |
| GA184A | SPECIAL DETAILED INSPECTION (TC) OF FWD ENGINE MOUNT PYLON BOLTS | 3 | |
| GA249 | INSPECTION MIRROR | 1 | |
| GA294 | MIRROR INSPECTION | 2 | |
| GA295 | INSPECTION MIRROR | 4 | |
| GA51B | INSPECTION MIRROR | 4 | |
| GB3509A-01 | GOULD-BASS MAGNETIC INSPECTION KIT | 1 | |
| GE Roto Array Wheel Probe 5mHz (64 Element) | GE Roto Array Wheel Probe 5mHz (64 Element) - Phased array ultrasonic inspection providing A, B & C-scan images, Suitable for scanning composite and aluminium aerospace components | 1 | |
| GE XL GO BORESCOPE INSPECTION CAMERA NDT 2M 3.9MM | GE XL GO BORESCOPE INSPECTION CAMERA NDT 2M 3.9MM | 1 | |
| GE-CFM1-723 | INSPECTION KIT CFM56-7B | 1 | |
| GE-CFMI-628 | MOLDED IMPRESSION INSPECTION KIT | 1 | |
| GE-CFMI-723 | CFM56-7 Fan blade us inspection kit | 2 | |
| GE-FQAP-524 | CF6-80A/80C STG 1 HPT DISK DOVETAIL SLOT BOTTOM AFT CORNER CHAMFER EDDY CURRENT INSPECTION | 1 | |
| GE-FQAP-622 KIT | CF6-50 STAGE 3 LPT DISK FWD SPACER ARM INSPECTION | 1 | |
| GE-FQAP-712 | GENX-2B HYDRAULIC FUEL MANIFOLD INSPECTION KIT | 1 | |
| GS18038 | INSPECTION MIRROR | 1 | |
| GS24151-1 | INSPECTION ZONE TEMPLATES (FACE SIDE) | 1 | |
| GS24151-2 | INSPECTION ZONE TEMPLATES (CAMBER SIDE) | 1 | |
| GSB2000019 | EDDY CURRENT, VIDEO & STRIP CHART, INSPECTION INSTRUMENT | 1 | |
| GT5563 | TELESCOPIC INSPECTION MIRROR ROUND STAINLESS STEEL 3-314 IN ^2^ | 1 | |
| GWH 15 | MAGNETIC PARTICLE INSPECTION EQUIPMENT | 1 | |
| H5-20K | "FOERSTER-IMADEN,EQUIVALENT - MAGNETIC-PARTICLE INSPECTION UNIT (STATIONARY) COPPER CENTRAL CONDUCTOR, OUTER DIAMETER: 20 MM, LENGTH: 450 MM" | 1 | |
| HA1979-6 | LAMP INSPECTION WIRELESS | 1 | |
| HB 2344 | ULTRASONIC INSPECTION TOOL OLYMPUS | 1 | |
| HCS1104-01 | HAMMER TAP TEST INSPECTION | 3 | |
| HCS2052-01 | KIT, THERMOGRAPHIC INSPECTION (NDT) | 1 | |
| HJT5310-200-1UDM-0000 | HONDA JET INSPECTION TEMPLATE | 1 | |
| HOCKING 29A029 | REFERENCE GAUGE FOR EDDY-CURRENT INSPECTION ON ALUMINUM ALLOY | 1 | |
| HOCKING 29A032 | REFERENCE GAUGE FOR EDDY-CURRENT INSPECTION ON TITANIUM ALLOY | 1 | |
| HOCKING 29A120 | REFERENCE GAUGE FOR EDDY-CURRENT INSPECTION ON MAGNESIUM | 1 | |
| HT-C2 | INSPECTION MIRROR | 4 | |
| HT-E2 | INSPECTION MIRROR | 2 | |
| HT-S2 | INSPECTION MIRROR | 12 | |
| HTC-2 | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 4 | |
| HTC-2LT | Ullman® All-Angle LED Light Inspection Mirrors (Mirror size: 2-3/8" Diameter) (Extension: 6-3/4" to 37") (Add to cart: Add To Cart) | 1 | |
| HTC2SS2 | 2 1/4' CIRCULAR INSPECTION MIRROR | 1 | |
| HTE-2 | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 2 | |
| HTE-2LT | Ullman® All-Angle LED Light Inspection Mirrors (Mirror size: 2-3/8" Diameter) (Extension: 6-3/4" to 37") (Add to cart: Add To Cart) (Mirror size: 1-3/8" Diameter) (Extension: 6-3/4" to 35-1/2") (Add to cart: Add To Cart) | 2 | |
| HTS-2LT | Ullman® All-Angle LED Light Inspection Mirrors (Mirror size: 2-3/8" Diameter) (Extension: 6-3/4" to 37") (Add to cart: Add To Cart) (Mirror size: 1-3/8" Diameter) (Extension: 6-3/4" to 35-1/2") (Add to cart: Add To Cart) (Mirror size: 3-3/8" Diameter) (Ex | 2 | |
| HU41956 | Inspection Beam | 1 | |
| IAE2F10066 | IRON - CJ ROTATOR INSPECTION BOROS TURB MT AERO | 5 | |
| IAE2R19851A | OUTER DIAMETER INSPECTION | 1 | |
| IAE2R19878 | HPC DRUM STAGE 8 ULTRASONIC INSPECTION KIT | 2 | |
| IAE2R19912 | CLAMP - ULTRASONIC INSPECTION | 1 | |
| IAE2RI9427 A | EDDY CURRENT INSPECTION EQUIPMENT | 1 | |
| IF11C5-20 | BORESCOPE - INSPECTION, FLEXIBLE, 11 MM, 60 DEG. DIRECT VIEW, 120 DEG. UP/DOWN, 100 DEG. LEFT/RIGHT, 2000 MM WORKING LENGTH | 1 | |
| IF11C5-30 | BORESCOPE - INSPECTION, FLEXIBLE, 11 MM, 60 DEG. DIRECT VIEW, 120 DEG. UP/DOWN, 100 DEG. LEFT/RIGHT, 2000 MM WORKING LENGTH | 1 | |
| IF6C5-13 | BORESCOPE - APU INSPECTION, FLEXIBLE, 6MM, 40 DEGREE FIELD DIRECT VIEW, 1.3M WORKING LENGTH | 1 | |
| IF6C5X1-8 | BORESCOPE - INSPECTION, FLEXIBLE 6 MM | 1 | |
| ILH-2A | LIGHT SOURCE - BORESCOPE, APU INSPECTION, MODEL ILH-2A | 1 | |
| IM1-TH | T H INSPECTION MIRROR | 1 | |
| INSMR-01 | Inspection mirror | 1 | |
| INSP-MIRROR-TOOL | INSPECTION MIRROR TOOL | 1 | |
| IRP0126 | PARTS, REFERENCE (ULTRASONIC INSPECTION) NLG BEAM ASSEMBLY | 1 | |
| IV8435 | BORESCOPE - INSPECTION, FLEXIBLE 4 MM (OLYMPUS) | 1 | |
| IV8620U | OLYMPUS IPLEX ULTRALITE IV8620U 6MM INDUSTRIAL INSPECTION VIDEOSCOPE BORESCOPE | 1 | |
| IV9435GT-B | BOROSCOPE, IPLEX PURCHASE IPLEX GT 4MM 3.5 METER VIDEOSCOPE W/ TIPS AND RIGID SLEEVE SET TO SUPPORT GEARBOX INSPECTIONS ON THE LANDING CRAFT, AIR CUSHION (LCAC) 100 CLASS CRAFT. | 1 | |
| IV9620GL | BORESCOPE - INSPECTION, FLEXIBLE 6 MM | 1 | |
| J2372 | MIRROR INSPECTION CIRCLE 2-1 | 2 | |
| J24016-1 | BATTERY INSPECTION GAUGE TOOL (HYDRO SYSTEMS) | 7 | |
| J27078-38 | INSPECTION EQUIPMENT, ELEVATOR FREEPLAY | 1 | |
| J27079 | INSPECTION EQUIPMENT-ELEVATOR PREEPLAY | 1 | |
| J27079-1 | INSPECTION EQUIPMENT | 3 | |
| J27079-31 | INSPECTION EQUIPMENT - ELEVATOR FREEPLAY | 5 | |
| J27079-32 | INSPECTION EQUIPMENT - ELEVATOR FREEPLAY | 4 | |
| J27079-32(~?) | INSPECTION EQUIPMENT -0 ELEVATOR FREEPLAY | 4 | |
| J27079-38 | INSPECTION EQUIPMENT - ELEVATOR FREEPLAY | 12 | |
| J27079-38 | INSPECTION EQUIPMENT - ELEVATOR FREE PLAY | 12 | |
| J27079-57 | INSPECTION EQUIPMENT - ELEVATOR FREEPLAY | 7 | |
| JHW40252 | 1/4" INSPECTION MIRROR | 1 | |
| JHW40254 | 3-1/4 INSPECTION MIRROR | 1 | |
| JMP/CFM56/D/4462 | PROBE - SHORT, WATER WASH, CFM56 INSPECTION KIT | 5 | |
| JSP05180A | LIGHTED ADJUSTABLE INSPECTION MIRROR | 1 | |
| K-2 | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 7 | |
| K-2HD | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| K-2M | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| K-2MHD | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| K-2ML | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| K-2MR | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| K-2R | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| K55008 | TENSION BOLT INSPECTION PLATFORM | 1 | |
| KAVEE001 | SMARTSCAN-FA, KAVEE001OTHER PN REGARDING AUTOMATIC WHEEL INSPECTION | 1 | |
| KBA532 | WAYGATE KRAUTKRAMER (FORMERLY GE INSPECTION TECHNOLOGIES) KBA532 PROBE CABLE | 1 | |
| KC10-7025-3 ASSEMBLY | CUSTOM MANUFACTURED BOEING REFERENCE STANDARD FOR ULTRASONIC INSPECTION 101/201 | 1 | |
| KC10-7027 | BOEING REFERENCE STANDARD KC10 FUEL COMPENSATOR CUTOUT-INSPECTION.( 301 GUIDE AND 302 GUIDE ARE PART OF INSPECTION AND SOLD SEPARATELY) | 1 | |
| KEN-518-5460K | FLEXIBLE INSPECTION MIRROR | 1 | |
| LED-LUX IP64 | INSPECTION LAMP 230 VAC 5.6W | 1 | |
| LMT FIG 905 | FISHMOUTH INSPECTION FIXTURE | 1 | |
| LOADMASTER 1000 | Loadmaster 1000 Inspection Tool | 1 | |
| LOADMASTER 3600 | Loadmaster 1000 Inspection Tool | 1 | |
| M22520/3-1 | GAGE - INSPECTION - DMC | 10 | |
| M22520/39-01 | GAGE - INSPECTION - DMC | 1 | |
| M601-913.9 | MIRROR FOR COMPRESSOR BLADES INSPECTION | 1 | |
| MAFIS | Mitutoyo MAFIS - Mafis-Express - Aerofoil Inspection Software | 1 | |
| MAG240007 | INSPECTION MIRROR | 1 | |
| MAGNET-A320(BIG) | A320 BIG INSPECTION MAGNET TOOL | 1 | |
| MCM1016T4 | INSPECTION MIRROR | 1 | |
| MI105 | MAGNET PICK UP & INSPECTION MIRROR SELLERY | 1 | |
| MIRROR,PICK UP AND INSPECTION TOOL, MAGNETIC, ADJUSTABLE LIFTS 1 1/2 LB. | MIRROR,PICK UP AND INSPECTION TOOL, MAGNETIC, ADJUSTABLE LIFTS 1 1/2 LB. | 1 | |
| MIT955Z1011MLG | TRUEBEAM JOINT INSPECTION | 3 | |
| MS-IG-600 | GAP INSPECTION GAUGE,3/8 FEMALE NUTS | 1 | |
| MSUP-300A-FIT | MSUP-300A-FIT;MAP-Series Fiber connector inspection app - requires probe | 1 | |
| MSUP-FIT | MSUP-FIT;MAP-200 Super Application Fiber Inspection (FIT) | 1 | |
| MWUX1214A | MWUX1214 WEDGE WEDGE FOR LEADING GEAR INSPECTION 7 DEGREE FOR A1 PROBE CASING RADIUS 159MM. | 1 | |
| NDT 3023P1 | 737 MAIN L/G ACTUATOR BEAM ARM INSPECTION | 4 | |
| NDT 3023P2 | 737 MAIN L/G ACTUATOR BEAM ARM INSPECTION | 4 | |
| NDT 669 | REF STD, MLG OUTER CYLINDER INSPECTION | 1 | |
| NDT3023 | 737 MAIN L/G ACTUATOR BEAM ARM INSPECTION | 4 | |
| NDT3316 | REFERENCE STANDARD FOR INSPECTION USE ON B737 AS PER B737 NDTM PART 4 53-10-16 | 2 | |
| NDT6048 | BOEING REFERENCE STANDARD 767 Part 4 27-40-02 horizontal stab inspection. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6052 | BOEING REFERENCE STANDARD 767 P4, 57-50-27. UT INSPECTION OF MAIN LANDING GEAR FORWARD TRUNNION SUPPORT SIDE LOAD FITTING | 1 | |
| NDT6076 | BOEING REFERENCE STANDARD 767 ..P6 57-20-10 MATERIAL: 7075-T6 OR 2024-T3 ALUMINUM. EXTERNAL LFEC INSPECTION ON STRINGERS6,10,15 AT THE LOWER WING SKIN AT RIBS3, 5, 18 AND 31. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6077 | BOEING REFERENCE STANDARD 767 ..P6 57-20-10 MATERIAL: 7075-T6 OR 2024-T3 ALUMINUM. EXTERNAL LFEC INSPECTION ON STRINGERS6,10,15 AT THE LOWER WING SKIN AT RIBS3, 5, 18 AND 31. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6078 | BOEING REFERENCE STANDARD 767 ..P6 57-20-10 MATERIAL: 7075-T6 OR 2024-T3 ALUMINUM. EXTERNAL LFEC INSPECTION ON STRINGERS6,10,15 AT THE LOWER WING SKIN AT RIBS3, 5, 18 AND 31. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6079 | BOEING REFERENCE STANDARD 767 ..P6 57-20-10 MATERIAL: 7075-T6 OR 2024-T3 ALUMINUM. EXTERNAL LFEC INSPECTION ON STRINGERS6,10,15 AT THE LOWER WING SKIN AT RIBS3, 5, 18 AND 31. Includes Test Report and Certificate of Conformance. | 1 | |
| NEC 8090 | 737 MAIN L/G ACTUATOR BEAM ARM INSPECTION, NDT3023, NDT3023P1, NDT3023P2, NDT 3023P3, TC4-255S, BN-M | 3 | |
| NEC-8090 | MLG ACTUATOR BEAM ARM U7 INSPECTION KIT | 3 | |
| NORTEC 600D | EDDY CURRENT INSPECTION EQUIPMENT OLYMPUS | 3 | |
| NST 3023P3 | 737 MAIN L/G ACTUATOR BEAM ARM INSPECTION | 1 | |
| Olympus NDT Sub-OmniPC License Key | Olympus NDT Sub-OmniPC License Key - SetUp Builder scan plan tool, Has all the analysis features of the Omniscan, Frees up Omniscan itself for inspection by allowing analysis on a PC | 1 | |
| Olympus Phased Array Weld Inspection Kit | Olympus Phased Array Weld Inspection Kit - he kit contains the following items:, qty 2 A12 5L64 PA probes with 5m cable., qty 2 SA12 N55S Standard Wedge with Removable IHC Ring, qty 1 ‘Y’ Splitter 64/64, for Omniscan MX2, 5m split conduit, Irrigation Tubi | 1 | |
| P-KIT | WINDOW INSPECTION PRISM | 1 | |
| PDKOS | WINDSHIELD INSPECTION PRISM | 1 | |
| PDL 1036 | C-130 TRUSS MOUNT UPPER LUG INSPECTION TRANSDUCER, 5MHz., "A" & "B" SMP 515-C INSPECTION PROCEDURE FOR WINGS CHAPTER 57. Includes Test Report and Certificate of Conformance. | 2 | |
| PDL1036 | C-130 TRUSS MOUNT UPPER LUG INSPECTION TRANSDUCER, | 2 | |
| PHASORXS | PHASOR XS; SOFTWARE VERSION 1.06; MADE BY GE INSPECTION TECHNOLOGIES | 1 | |
| PLZ-00123 | AIR INLET INSPECTION ASSEMBLY FIXTURE | 1 | |
| PROTO 2372 | INSPECTION MIRROR | 1 | |
| PS-IL10 | FLASHLIGHT;|NH90 TOOL STORE ,UNILITE HANDHELD INSPECTION LAMP 3.7 V ,RS COMPANY ,RS STOCK NO (172-1177); | 1 | |
| PSM-5 | NDT PSM INSPECTION PANEL - PSM-5 | 7 | |
| PT.30a | CUSTOM 45 DEGREE LUCITE SHEAR WAVE WEDGE FOR TITANIUM INSPECTION USED WITH RS.22 | 1 | |
| PT.30b | CUSTOM 20 DEGREE LUCITE "L" WAVE WEDGE WITH 1.220" RADIUS FOR TITANIUM INSPECTION USED WITH RS.22 | 1 | |
| PTM143 | INSPECTION MIRROR | 3 | |
| PTM147 | INSPECTION MIRROR | 1 | |
| PTM157 | INSPECTION MIRROR. | 2 | |
| PWA 104224 | MECHANICAL INSPECTION TOOL (NOTCH INSPECTION JT8D-200 LPT 3-4 STAGES FAA AD 2011-07-02) | 1 | |
| PWA101480 | INSPECTION (FPI) HPC DRUM ROTOR | 1 | |
| PWA104224 | MECHANICAL INSPECTION TOOL | 1 | |
| PWA115296 | THIS TOOL IS USED TO DO A DIMENSIONAL INSPECTION OF THE LEADING EDGE SHAPE | 1 | |
| PWA28678 | INSPECTION GAGE - MASTER BLADE_[PWA28678] | 2 | |
| PWA45877 | GAGE INSPECTION FAN BLADE RUBSTRIP FOR DAMAGE | 1 | |
| PWA46050 | GAGE INSPECTION FAN BLADE RUBSTRIP FOR DAMAGE | 1 | |
| PWA75213-2 | FOOT CONTROLLED PNEUMATIC DRIVER - BORESCOPE INSPECTION | 1 | |
| PWA83277 | CARD - REFERENCE, INSPECTION PHOTOGRAPH, MAGNETIC CHIP COLLECTOR | 1 | |
| PWA85682 | Fixture, Constraint - Hub, LPT 5th Stage, Machining & Inspection | 2 | |
| PWA86149 | TEMPLATE INSPECTION | 1 | |
| PWA86684 | ULTRASONIC INSPECTION KIT PW-4000 10TH STAGE COMPRESSOR DISK | 1 | |
| PWA86686 | EDDY CURRENT INSPECTION KIT PW-4000 10TH STAGE COMPRESSOR DISK | 1 | |
| PWC34910-109 | BORESCOPE INSPECTION OF THECOMPRESSOR TURBINE BLADES FOREVIDENCE OF BLADE SHIFTING | 9 | |
| PWC56007 | TEMPLATE INSPECTION | 1 | |
| PWC56007-100 | Template Inspection | 1 | |
| PWC56007-200 | Template Inspection | 1 | |
| Phoenix ISL Sp-Arc Scanner | Phoenix ISL Sp-Arc Scanner - Corrosion mapping, Covers the important inspection area on the underside of pipes, Up to 120° coverage in a single scan | 1 | |
| Phoenix ISL Swift SD ToFD Scanner | Phoenix ISL Swift SD ToFD Scanner - ToFD & Phased Array Scanner, Versatile pivoting wheel option for B or D scans, Can be used with Omniscan SX (e.g for 1 channel ToFD) or MX2 for multi-group inspections | 1 | |
| Phoenix ISL Tracer Scanner | Phoenix ISL Tracer Scanner - Corrosion mapping or Composite inspection, Freehand scanning without constraints, Can be used with Omniscan SX or MX2, Optional hydroform cradle | 1 | |
| Q0300017 | OLYMPUS NORTEC 600 - NDT INSPECTION EQUIPMENT | 2 | |
| QT-US-RV1450 | REMOTE VISUAL INSPECTION KIT | 1 | |
| QT-US-RVI450 | REMOTEVISUAL INSPECTION KIT | 1 | |
| R815505-001 | INSPECTION ZONE TEMPLATE | 1 | |
| R815505-002 | INSPECTION ZONE TEMPLATE | 1 | |
| RB23055347 | Fixture-Inspection Frt. Compressor Support Assembly | 2 | |
| RBE332A94-3400-03 | TAIL ROTOR DRIVE ALIGNMENT INSPECTION | 2 | |
| RBH5610-705-40101 | INSPECTION FIXTURE FAN ASSEMBLY TRANS & COUPLING | 2 | |
| RBT260T | General Inspection and Maintenance Kit (with Torque Wrench Set) | 1 | |
| RBT260TDR | General Inspection and Maintenance Kit (with Torque Wrench Set) | 1 | |
| RBT260TM | RBT260TM Metric General Inspection and Maintenance Kit (with Torque Wrench Set) | 1 | |
| RRT030714 | DROP CHECK INSPECTION BEAM | 1 | |
| RRT046961 | TURNING TOOL - ROTATE HP COMPRESSOR FOR BORESCOPE INSPECTION | 3 | |
| RRT046961-1 | TURNING TOOL - ROTATE HP COMPRESSOR FOR BORESCOPE INSPECTION | 2 | |
| RRT053995 | INSPECTION BEAM | 1 | |
| RRT069629 | INSPECTION SPHERE MTG BLOCK | 1 | |
| RRT082508 | TRENT 1000 SILK SCREEN PRINT INSPECTION TEMPLATE ASSEMBLY | 1 | |
| RRT115160 | PHASED ARRAY INSPECTION KIT (WATER-COUPLED SYSTEM) | 1 | |
| S-2 | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| S-2HD | Ullman® All-Angle Inspection Mirrors (Description: Mirror: 1" x 2" Oval) (Overall length: 8" (20 cm)) (Type: Standard (non-telescoping)) (Add to cart: Add To Cart) (Description: Mirror : 3-1/4" Dia. Extends To: 29-1/2" (75 cm)) (Overall length: 6-1/2" (16 | 1 | |
| S5003 | INSPECTION MIRROR | 1 | |
| S898Z | AUTOMOTIVE INSPECTION SET | 1 | |
| SB09530016-5 | Eddy Current Inspection Reference standard SB MD-A27-320 R01 | 2 | |
| SBA300-57-6009 | ROTATING BOLT INSPECTION VANMAR TOOL | 1 | |
| SBA300-57-6052 | FRAME 40 INSPECTION REPAIR KIT TOOL | 1 | |
| SCANGRIP STAR RECHARGEABLE COB | SCANGRIP STAR RECHARGEABLE COB LED INSPECTION MAGNETIC HAND FLOOD LIGHT | 1 | |
| SK601R-30008A | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERED FASTENED ASSEMBLY, EQUIVALENT IN MATERIAL AND THICKNESS AS THE INSPECTION AREA CONTAINING SUBSURFACE ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ). | 6 | |
| SPL-4267 | INSPECTION EQUIPMENT - ELEVATOR FREEPLAY | 1 | |
| SPO 1598 | ALUMINUM SKIN CORROSION LOSS INSPECTION (IMPEDANCE PLANE DISPLAY) | 1 | |
| SPO-5629-H-R1 | FIXTURE, COMPOSITE INSPECTION INSTRUMENT BONDMASTER PROBE | 1 | |
| SRS-0824A | HFEC INSPECTION KALIBRASYON BLOĞU. (ALÜMINYUM) | 3 | |
| SRS-0824SS | BOEING IÇIN HFEC INSPECTION KALIBRASYON BLOĞU. (PASLANMAZ ÇELIK) | 1 | |
| SRS-0824T | BOEING IÇIN HFEC INSPECTION KALIBRASYON BLOĞU. (TITANYUM) | 3 | |
| SSTYPE301 | GAGE,INSPECTION,MAST | 2 | |
| ST8870-1 | STANDARD BLOCK FOR INSPECTION OF COMPOSITE MATERIALS | 4 | |
| ST8870-7 | COMPOSIT MATERIAL INSPECTION BLOCK | 4 | |
| ST8870-8 | COMPOSIT MATERIAL INSPECTION BLOCK | 5 | |
| STD-600 | MIRROR - INSPECTION | 1 | |
| STD-7028 | EQUIPMENT - BORESCOPE INSPECTION | 1 | |
| STE-S-22 | 10″ TO 14″ INSPECTION MIRROR, 142 142-1 | 1 | |
| STP 2372 | MIRROR INSPECTION CIRCLE 2-1 | 1 | |
| STT000940000010 | MIRROR - INSPECTION | 1 | |
| Silverwing RMS2 – C-Scan Mapping System control unit | Silverwing RMS2 – C-Scan Mapping System control unit - Ultrasonic corrosion mapping system, Designed to evaluate the condition of ferrous structures, Inspection material thickness up to 150 mm | 1 | |
| Silverwing UT Lite - UT Data Acquisition/ Analysis Module | Silverwing UT Lite - UT Data Acquisition/ Analysis Module - Ultrasonic inspection system, Suitable for corrosion profiling and mapping, No couplant required, Compatible with R-Scan or Scorpion | 1 | |
| T-500 | "SURFACE FINISH INSPECTION TOOLS: EXPOSED METALLIC SURFACES | 1 | |
| T-500 PROFILOMETER | SURFACE FINISH INSPECTION TOOLS: EXPOSED METALLIC SURFACES | 1 | |
| T71884 | MOD HAUSING WEAR INSPECTION TOOL | 15 | |
| T9425USB | INSPECTION LAMP | 1 | |
| TB5800-ATT-OTDR-MOD2 | TB5800-ATT-OTDR-MOD2;T-BERD5800 LA OTDR with VFL upgrade and inspection scope | 1 | |
| TC3Z-I-0000 | COMPLETE REMOTE FLUORESCENT PENETRANT INSPECTION (RFPI) KIT | 1 | |
| TC4-255S | 737 MAIN L/G ACTUATOR BEAM ARM INSPECTION | 2 | |
| TEK-1516 | Diaphragm Inspection setup includes Base and Probe | 1 | |
| TEK-1516-H | Diaphragm Inspection Base | 1 | |
| TEK-1516-P | Diaphragm Inspection Probe | 1 | |
| TEK-1564-T | Special Probe, Edge Inspection, 500KHz-2MHz | 1 | |
| TEK-1564-TI | Special Probe, Edge Inspection, 1-3 MHz | 1 | |
| TEK-1573-AL | Special Vertical Inspection Edge Probe, Aluminum, 50-500kHz | 1 | |
| TEK-5154 | CUSTOM 2 ELEMENT RING TRANSDUCER FOR BORE HOLE INSPECTION WITH BOEING REFERENCE STANDARD 55-10-13 PAGE 9 FIGURE 2. TWO MICRODOT CONNECTORS "A" AND "B" | 1 | |
| TEK-9088-1.4 | SPECIAL DESIGN, 5.0 MHZ, SHEAR WAVE, DUAL TRANSDUCER, LUG BORE ULTRASONIC INSPECTION TRANSDUCER | 1 | |
| TEK-9088-1.6 | SPECIAL DESIGN, 5.0 MHZ, SHEAR WAVE, DUAL TRANSDUCER, LUG BORE ULTRASONIC INSPECTION TRANSDUCER | 1 | |
| TEKIT-1011 | Surface EC Inspection Kit, Includes; TEK-6064 Standard, TX5PEN95-6/1M, 1150 Pelican Case w/foam & N16-T6-B Cable | 1 | |
| TEKIT-2009 | KIT, Multi Purpose ET Surface Inspection, with Pelican 1500 case | 1 | |
| TEKIT-5001 | Kit, Ultrasonic Thickness Inspection, Delay Line TD's and Step Wedges, w/ Cables and Couplant, Included in Kit: TRD-255, TRD-2510, TRD-501, TRD-502, TRD-505, TRD-1215, TRDS-12, TRDS-25, TRDS-50, TCP-15, TCP90-15, TCPD.080, BN-M6, 4034T42, RT11-2024T3-.... | 1 | |
| TEKIT-5085 | Lower Gimbal lug Assembly Inspection Kit, NDT616,NDT616P,TC5-185T, 1150 Case | 1 | |
| TEKIT-8090 | 737 Main L/G Actuator Beam Arm Inspection, NDT3023, NDT3023P1, NDT3023P2, NDT 3023P3, TC4-255S, BN-M6 cable, Couplant, Kit Box | 2 | |
| THGA52B | TOOLS/HEIGHT INSPECTION MIRROR | 1 | |
| TM0131 G004 | INSPECTION TEMPLATE ASSY FOR AXIAL COMPRES. BLADES | 1 | |
| TM0131G004 | INSPECTION TEMPLATE ASSY FOR AXIAL COMPRESSOR BLADES | 1 | |
| TM6935G001 | EROSION GAGE INSPECTION TEMPLATE ASSY FOR AXIAL COMPRESSOR BLADES | 2 | |
| TP-A3RS-1.0-MM-2 | SURFACE INSPECTION OF ALUMINUM PARTS | 1 | |
| TPI9000 | INSPECTION VIBRATION TEST METR | 1 | |
| TS800 | INSPECTION TOOL, MEASUREMENT - LASERGAUGE | 1 | |
| TT-FIBERCHEK-SP | TT-FIBERCHEK-SP;Self-Paced - FiberChek Probe Fiber Inspection - 30 minutes | 1 | |
| TT-ONXDSL-P5000I-SP | TT-ONXDSL-P5000I-SP;Self-Paced - ONX-580 Fiber Inspection w/the P5000i - 10 minutes | 1 | |
| TT-TB2000-P5000I-SP | TT-TB2000-P5000I-SP;Self-Paced - TB2000 Fiber Inspection w/the P5000i - 10 minutes | 1 | |
| TT-TB5800-P5000I-SP | TT-TB5800-P5000I-SP;Self-Paced - TB5800 Fiber Inspection w/the P5000i - 10 minutes | 1 | |
| U8800581 | SPECIAL TOOLS (1) USE A NONCONDUCTIVE STRAIGHTEDGE DURING CALIBRATION AND THE INSPECTION (FOR SCAN ROWS 1 AND 4). (2) USE A CIRCLE TEMPLATE DURING THE INSPECTION TO DO SEMICIRCULAR SCANS AROUND THE RIVETS (FOR SCAN ROWS 2 AND 3). (S.NO: MGAT/NDT/001) | 1 | |
| U8861067 | 99D52103002000: Inspection Tem | 1 | |
| U8861068 | 99D52103003000: Inspection Tem | 1 | |
| UIM 225 | INSPECTION MIRROR | 4 | |
| UIM 325 | INSPECTION MIRROR | 2 | |
| UIM125 | MIRROR, INSPECTION, | 2 | |
| UIM1LT | Mirror, Inspection, LED Lighted, 1 3/8" | 2 | |
| UIM225 | MIRROR, INSPECTION, | 4 | |
| UIM225GR | TELESCOPIC INSPECTION MIRROR WITH GREEN HANDLE 214 X 612 | 1 | |
| UIM225HD | HEAVY DUTY INSPECTION MIRROR | 1 | |
| UIM225OR | 2 1/4" INSPECTION MIRROR | 1 | |
| UIM225RD | TELESCOPING INSPECTION MIRROR (BLUE-POINT®) (RED) | 1 | |
| UIM2FL | FLEXIBLE INSPECTION MIRROR (BLUE-POINT®) | 2 | |
| UIM2LM | Mirror, Magnifying/Inspection, Extra Long | 1 | |
| UIM2LT | LIGHTED INSPECTION MIRROR | 2 | |
| UIM2LTUV | Mirror, LED/UV Inspection, 2 3/8" | 1 | |
| UIM2RSLT | LED INSPECTION MIRROR | 1 | |
| UIM325 | ESPEJO DE INSPECCION TELESCOPICO (TELESCOPING INSPECTION MIRROR) | 2 | |
| US-1779 | TIE BOLT INSPECTION SYSTEM | 1 | |
| US225 | MIRROR, INSPECTION, TELESCOPING,2-1/4” MIRROR | 1 | |
| UT-PHT-CALBLK2.1/8-CAL | OPTIONAL DIMENSIONAL INSPECTION REPORT – CERTIFICATE OF CALIBRATION (FOR P/N: UT-PHT-CALBLK2.1/8.CS) | 1 | |
| WHEEL SCAN 5 | AUTOMATIC WHEEL INSPECTION SYSTEM | 1 | |
| WHEELSCAN MK IV | AUTOMATIC EDDY CURRENT A/C WHEEL INSPECTION (NDT) | 1 | |
| YA5160A | LIGHTED ADJUSTABLE INSPECTION MIRROR | 1 | |
| ZA-1633 | PENETRANT PROCESSING INSPECTION EQUIPMENT | 1 | |
| ZA-915 | MODULAR PENENTRANT INSPECTION LINE | 1 | |
| ZD-129A | MAGNIFIER LAMP(INCOMING INSPECTION) (ZHONGDI ZD-129A LED) | 1 | |
| ZGS-10000-5 | ZEPHYR WIRE ROPE INSPECTION SYSTEM | 1 | |
| ZGS-11000-4 | ZEPHYR WIRE ROPE INSPECTION SYSTEM | 1 | |
| ZHONGDI ZD-129A LED | MAGNIFIER LAMP(INCOMING INSPECTION) | 1 | |
| HTE2SS2 | INSPECTION MIRROR 1 1/4" | 1 | |
| 98A54403024000 | ADAPTOR,DYNAMOMETRIC N1,FOR INSPECTION/C | 8 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
