| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 17PRE65B00715 | INLET COVER | 1 | |
| 1AE1N20400 | INLET COVER | 1 | |
| 1AE1N20400 REV B | INLET COVER | 1 | |
| 636-0001-4GSE | INLET COVER | 2 | |
| 6833108 | Inlet Cover | 1 | |
| 98C1010H001-000 | INLET COVER | 1 | |
| 98D10003001000 | INLET COVER | 13 | |
| 98D10003002000 | INLET COVER | 17 | |
| 98D10103005000 | INLET COVER | 1 | |
| 98N1010H001-000 | INLET COVER | 5 | |
| A10004 | INLET COVER | 1 | |
| B737-100 | INLET COVER | 1 | |
| FC-GE90-11B-EIC | INLET COVER | 4 | |
| FC-GE90EIC | INLET COVER | 3 | |
| G10003-1 | Inlet Cover | 5 | |
| G10003-2 | Inlet cover | 1 | |
| G10005 | Inlet cover | 1 | |
| IAE1N20400 | INLET COVER | 10 | |
| LMC16M87 | INLET COVER | 5 | |
| LMC18G87 | INLET COVER | 4 | |
| LPC12J82 | INLET COVER | 2 | |
| PWA88060 | Inlet Cover | 4 | |
| SCA-WL14L96A | INLET COVER | 1 | |
| WL20D93 | INLET COVER | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 98D10003000000 | COVER INLET COWL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D10003002000 | Cover Inlet Cowl (CALIBRATION) (CALIBRATION) | 1 | |
| 1006174 | COVER, INLET BLOWER HOUSING | 1 | |
| 101-590098-7 | COVER, AIR INLET | 3 | |
| 109-590014-7 | INLET COVER ASSEMBLY | 3 | |
| 10C1223G01 | FIXTURE, PULLER - OIL INLET COVER (PULLER FIXTURE) | 1 | |
| 1159GSE40114-5 | INLET COVER, PLASTIC | 3 | |
| 1159GSE40117-1 | NACELLE AIR INLET COVER | 1 | |
| 1159GSE40117‐899‐1 | UPPER NACELLE INLET COVERS | 1 | |
| 11C4513 | FIXTURE, COVER BOOSTER INLET S | 1 | |
| 11C4513G01 | PROTECTIVE COVER - BOOSTER (LPC) INLET 747-8F | 1 | |
| 135T06292-401 | ENGINE AIR INLET COVER | 1 | |
| 140-110 | ENGINE INLET COVERS (CARDS) (set of 2) | 1 | |
| 145-41306-901 | PACK INLET COVER | 1 | |
| 145-52691-401 | COVER- AIR INLET, APU | 3 | |
| 145-63225-401 | COVER - AIR INLET, APU | 3 | |
| 14W1060001 | COVER - ENGINE AIR INLET | 2 | |
| 16A23015L1-1 | COVER, ENGINE INLET | 1 | |
| 170-101 | ENGINE INLET COVERS (CARDS) (set of 2) | 1 | |
| 170T06202-401 | COVER, ECU NACA AIR INLET - FWDWFF | 2 | |
| 172-106 | AIR INLET COVER | 1 | |
| 17PRE65B00713 | COVER - ENGINE INLET | 1 | |
| 190T06197-401 | COVER - INLET RHS NACA SCOOP | 2 | |
| 190T06199-401 | COVER - INLET LHS NACA SCOOP | 2 | |
| 196T07621-401 | COVER, ECU NACA AIR INLET - FWD WFF | 1 | |
| 196T08170-401 | COVER - AIR INLET, DRY AREA | 1 | |
| 1AE1N20027 | COVER, INLET | 1 | |
| 1AE1N20027 REV A | COVER, INLET | 1 | |
| 204-102 | PARTICLE SEPARATOR INLET COVER (chain weighted type) | 1 | |
| 205-025 | PARTICLE SEPARATOR INLET COVER (SNAP-ON) | 1 | |
| 212-070-112-001 | LH INLET COVER | 1 | |
| 212-070-112-002 | RH INLET COVER | 1 | |
| 217024-11 | INSTL TOOL-PACKING, APU, FUEL FILTER, INLET COVER | 1 | |
| 217384-1 | VSE Aviation 217384-1 Inlet Cover, For Aircraft Engine | 1 | |
| 2187-3 | COMPRESSOR INLET PORT COVER AND GASKET | 1 | |
| 21C7088P01 | COVER, MULTIPURPOSE, ENGINE INLET | 1 | |
| 21C7396P01 | COVER, INLET, ENGINE | 1 | |
| 21C8033P01 | COVER, ENGINE INLET | 1 | |
| 26122-AF1 | INLET COVER HOLDING FIXTURE | 1 | |
| 26122AF1 | INLET COVER HOLDING FIXTURE | 1 | |
| 284566-1-1 | COVER OIL INLET, TORQUE CALIBRATION | 1 | |
| 2C5110P01 | COVER - FAN INLET | 1 | |
| 2C5209P01 | Compressor Inlet Cover | 1 | |
| 2C81018P01 | Cover − Fuel Pump Inlet Shipping | 1 | |
| 2C81019 | COVER - FAN CASING INLET | 1 | |
| 2C81019G01 | Cover − Fan Casing Inlet | 1 | |
| 2C81213G01 | Shipping Cover − CPRSR Inlet | 1 | |
| 2C90088P01 | COVER, MULTIPURPOSE, ENGINE INLET | 1 | |
| 330-105 | EXHAUST COVER/STARTER GENERATOR INLET PLUGS (set of 2) | 1 | |
| 330-120 | INLET SCREEN COVER | 1 | |
| 337-007 | CANOPY COVER w/14" bib ext., goes back to rear engine inlet, hooks to trailing edge | 1 | |
| 337-110 | REAR ENGINE INLET COVER (w/hoop detail) | 1 | |
| 337-112 | REAR ENGINE INLET COVER (RILEY CONVERSION w/ plug for air inlet on left side) (set of 2) | 1 | |
| 337-810 | TRAVEL COVER, Light Weight Canopy Cover w/14" bib ext., goes back to rear engine inlet, hooks to trailing edge | 1 | |
| 347-1100-4GSE | COVER, ENGINE AIR INLET | 2 | |
| 35-93120-0001 | COVER, SOFT INLET | 1 | |
| 351-7000-04GSE | INLET COWL COVER | 1 | |
| 351-7000-4GSE | COVER INLET COWL | 3 | |
| 3G7160H03931A190A | INLET BARRIER FILTER (IBF) PROTECTION COVER, LH (FB-25-00) | 1 | |
| 3G7160H04031A190A | INLET BARRIER FILTER (IBF) PROTECTION COVER, RH (FB-26-00) | 1 | |
| 3PRE65B94003 | COVER - CF6-50 ENGINE INLET | 1 | |
| 421-HPH | PITOT COVERS AND HEATER INLET SET (on nose) (set of 3) | 1 | |
| 425-HPH | PITOT COVERS AND HEATER INLET SET (on nose) (set of 3) | 1 | |
| 429-116 | INLET BARRIER FILTER COVER, SNAP-ON (TYPE: DONALDSON) | 1 | |
| 441-150 | PITOT COVERS & HEATER INLET PLUG SET (set of 3) | 1 | |
| 454GGS0151-1 | COVER INLET L/H | 1 | |
| 876489 | PULLER ASSY., FOR BALL BEARING 15*32*8., OIL INLET FLANGE OIL INLET COVER | 1 | |
| 892807 | COVER-ENGINE INLET, CFM56-7 | 1 | |
| 892810 | COVER, INLET, GE | 1 | |
| 892812 | COVER, ENGINE INLET - LEAP 1B | 1 | |
| 892815 | ENGINE INLET COVER KIT | 1 | |
| 892820 | COVER ENGINE INLET OF PW2000    | 1 | |
| 4952170 | Cover Inlet Plenum | 1 | |
| 5100141 | COVER ENGINE INLET | 1 | |
| 5101235 | COVER INLET ENGINE | 2 | |
| 5101505 | COVER ENGINE INLET CFM56 | 1 | |
| 5826053-1 | INLET DUCT COVER | 1 | |
| 5826065-1 | COVER, INLET SHIPING/MAINTENANCE | 3 | |
| 5826065−1 | INLET COVER SHIPPING/MAINTENANCE | 3 | |
| 5916736-1 | ENG INLET COVER | 1 | |
| 5916737-1 | DORSAL RAM AIR INLET COVER | 1 | |
| 636-0001-4GSE | COVER INLET COWL LIP | 2 | |
| 636-1100-3GSE | INLET COWL PROTECT COVER | 3 | |
| 636-1100-4GSE | INLET COWL LIP COVER | 3 | |
| 636-1100_4GSE | INLET COWL LIP COVER | 3 | |
| 6796302 | COVER - TURB INLET CASING | 1 | |
| 6796552 | COVER - TURBINE INLET CASING | 2 | |
| 6799717 | Cover-Turbine Inlet Case | 2 | |
| 6800088-10 | COVER, PLASTIC COMPR INLET | 1 | |
| 6833108 | PURGE FIXTURE, ARGON, INLET COVER (NOT ILLUS- CONNECTS ARGON SUPPLY TO NOZZLE TRATED) INLET DURING COVER WELD PROCEDURE. | 1 | |
| 6877001 | TACK WELD FIXTURE, COVER HOLDS FUEL NOZZLE COMPONENTS IN POSITION DURING INLET COVER TACK WELD PROCEDURE. | 1 | |
| 6887006 | PRESSURE TEST FIXTURE INLET COVER | 1 | |
| 6897006 | PRESSURE TEST FIXTURE, INLET COVER | 1 | |
| 6897097 | POLISHING ARBOR POLISHES INLET COVER FITTING SEAL SURFACE. | 1 | |
| 23055383 | COVER, ENGINE INLET | 1 | |
| 767-GE-CF6-2V | COVER INLET (ENGINE CF6-80C2) | 1 | |
| 777-100 | COVER-INLET | 1 | |
| 856A2685 | ADAPTER, PULLER - OIL INLET COVER (PULLER ADAPTER) | 1 | |
| 856A2685G02 | PULLER ADAPTER - OIL INLET COVER | 1 | |
| 856A2685G03 | PULLER ADAPTER - OIL INLET COVER | 5 | |
| 856A3419 | ADAPTER, PULLER - OIL INLET COVER | 2 | |
| 856A3419 G01 | Adapter Puller Cover Oil Inlet | 2 | |
| 856A3419 G02 | Adapter Puller ‐ Oil Inlet Cover & Major Module | 22 | |
| 856A3419 REV B | ADAPTER, PULLER COVER OIL INLET | 1 | |
| 856A3419G01 | ADAPTER, PULLER COVER OIL INLET | 2 | |
| 856A3419G02 | ADAPTER, PULLER COVER OIL INLET | 22 | |
| 8777-100 | COVER, INLET, GE | 1 | |
| 953998C1 | AIR INLET COVER | 1 | |
| 956A8163 | COVER - PROTECTOR - NUT - INLET GEARBOX | 1 | |
| 98A10001001000 | COVER INLET ENGINE | 4 | |
| 98A10001502000 | COVER INLET ENGINE | 3 | |
| 98A10001508000 | COVER INLET ENGINE | 2 | |
| 98D10000013000 | COVER-INLET COWL ENGINE | 1 | |
| 98D100003001000 | ENGINE INLET COVER CFM56 | 1 | |
| 98D10003000 | ENGINE COVER INLET COWL V2500 | 1 | |
| 98D10003000000 | COVER-INLET COWL ENGINE | 9 | |
| 98D10003001000 | COVER-INLET COWL ENGINE | 13 | |
| 98D10003002000 | COVER - INLET COWL ENGINE | 17 | |
| 98D10103001000 | ENGINE INLET COVER | 1 | |
| 98D52308001000 | INLET COWL PROTECT COVER | 7 | |
| 98K1010H001-000 | INLET COWL COVER | 1 | |
| 98K1010H001-001 | TRENT 7000INLET COVERS | 1 | |
| 98K1010H005-000 | COVER INLET ENGINE | 1 | |
| 98L1010H001-000 | COVER-INLET | 1 | |
| 98L1010H005-000 | COVER-INLET | 1 | |
| 98N1010H001-000 | COVER INLET COWL ENG | 5 | |
| 98N1010H001000 | COVER INLET COWL ENG | 5 | |
| 99-590014-7 | AIR INLET COVER (BEECHCRAFT CORP) | 1 | |
| A-10-004 | INLET COVER - CF6-80A/80C2 ENGINES | 1 | |
| A1000150200000 | COVER INLET ENGINE | 1 | |
| A10004 | INLET COVER - CF6-80A/80C2 ENGINES | 1 | |
| A320-110 | INTAKE COVER, each (OEM TYPE), CFM56-5A, Equivalent to P/N: RSE1114, Cover-Inlet Cowl Engine | 1 | |
| A320-111 | INTAKE COVER, each, CFM56-5B4/3, OEM EQ to P/N: RSE1244, Cover-Inlet Cowl Engine 98D10003002000 | 13 | |
| A320-115 | INTAKE COVER, each, IAE V2500, OEM EQ to P/N: IAE1N20400, Cover-Inlet Cowl Engine, Tool 98D10003001000 | 1 | |
| ACS87001 | Soft Cover − Air Inlet and Exhaust (short term) | 3 | |
| ACS87015 | Cover − Engine Inlet | 3 | |
| ACS87015 | COVER, ENGINE INLET | 3 | |
| AE1N20400 | COVER-INLET COWL | 1 | |
| AEK-B767-0002 | COVER - INLET FOR CF6-80C2 ENGINE | 1 | |
| AGE-01423-401 | COVER, HEAT EXCHANGER AIR INLET, APU (GSE 212) | 3 | |
| AGE-03286-401 | COVER - ENGINE AIR INLET | 1 | |
| AGE-03286-403 | COVER - ENGINE AIR INLET | 2 | |
| AGE-03768-401 | COVER - ENGINE AIR INLET | 2 | |
| AGE-03768-403 | COVER - ENGINE AIR INLET | 1 | |
| AGE-03901-401 | COVER, MAIN AIR INLET, APU (GSE 212) | 2 | |
| AGE-04424-401 | COVER - AIR INLET, APU | 2 | |
| AGE01423-401 | COVER - HEAT EXCHANGER AIR INLET, APU | 3 | |
| AH130-010 | BUBBLE COVER, extends to cover fwd engine inlet | 1 | |
| AH130-105 | OIL COOLER INLET COVER | 1 | |
| AH130-820 | TRAVEL COVER, Light Weight Travel Bubble Cover, extends to cover fwd engine inlet | 1 | |
| AH145-105 | BARRIER INLET FILTER COVER (OEM P/N: B103P0008102) | 1 | |
| AH72-105 | BARRIER INLET FILTER COVER | 1 | |
| AIC0034-A0 | COVER - ENGINE INLET CFM56-7B | 1 | |
| AIC0034-A01 | COVER - ENGINE INLET | 1 | |
| AIC0034-A01-01 | COVER - ENGINE INLET | 1 | |
| AIC0073-A01 | COVER-ENGINE INLET, CFM56 | 1 | |
| AIC0277-A01 | COVER - INLET FOR CF6-80C2 ENGINE | 1 | |
| AIC0408-A01-02 | COVER, INLET, GE 777-300ER | 1 | |
| AIC0410-A01 | COVER-ENGINE INLET, V2500 | 1 | |
| AIC0432-A01 | COVER, INLET | 1 | |
| AIC1440-A01 | INLET COWL COVER AND PLUGS | 1 | |
| ASE-00320-109 | COVER-INLET COWL ENGINE | 1 | |
| ASE-00747-03 | INLET COVER ASSY | 1 | |
| AST10B500-1 | 757 INLET COVER P.W.-2000 | 1 | |
| AST400-2 | APU ENGINE AIR INLET COVER | 1 | |
| AST400-3 | APU COOLING AIR INLET COVER | 1 | |
| AVTB73MLEA1B | Aviatema Engine Inlet Cover B737MAX | 2 | |
| AVTB73NCFM56 | Aviatema Engine Inlet Cover B737NG | 1 | |
| AVTB747GECF6BT | Aviatema B747 GECF6 Engine Inlet Cover | 1 | |
| AVTB747GENX2 | Aviatema B747 GENX2 Engine Inlet Cover | 1 | |
| AVTB747PW400 | Aviatema B747 PW4000 Engine Inlet Cover | 1 | |
| AVTB757RB211 | Aviatema B757 RB211 Engine Inlet Cover | 1 | |
| AVTB767GECF6 | Aviatema B767 GE CF6 Inlet Cover | 1 | |
| AVTB767PW400 | Aviatema B767 PW4000 Engine Inlet Cover | 1 | |
| AVTB777GE90 | COVER: ENGINE INLET,PW4000, B777 | 1 | |
| AVTB777PW400 | COVER: INLET,PW4000 ENGINE, B777 | 1 | |
| AVTB777TR800 | COVER: INLET,TR800 ENGINE, B777 | 1 | |
| AVTB77XGE9X | Aviatema B777X GE9X Engine Inlet Cover | 1 | |
| AVTB787GENX | PROTECTIVE COVER- ENGINE INLET B787-8 GENIX (GE) | 1 | |
| AVTB787GENX1 | Aviatema B787 GENX1 Engine Inlet Cover | 1 | |
| AVTB787GENXP | PROTECTIVE COVER- ENGINE INLET B787-8 GENIX (GE) | 1 | |
| AVTB787TR100 | Aviatema B787 TR100 Engine Inlet Cover | 1 | |
| B35-110 | INDUCTION AIR FILTER INLET COVER | 1 | |
| B36-110 | INDUCTION AIR FILTER INLET COVER | 1 | |
| B36-111 | SIDE COWLING INLET SCOOP COVER (TC Models, with mesh, snap-on) | 1 | |
| B737 ENGINE INLET | COVER - ENGINE INLET | 1 | |
| B737-104 | COVER, ENGINE INLET - LEAP 1B | 1 | |
| B737-150 | COVER ENGINE INLET , CFM56-7 | 1 | |
| B737-150 | COVER-ENGINE INLET | 1 | |
| B737-152 | COVER ENGINE INLET , CFM56-7 | 1 | |
| B737-153 | COVER, ENGINE INLET - LEAP 1B | 1 | |
| B747-155 | SPL-10920 - PROTECTIVE COVERS - ENGINE INLET | 1 | |
| B757-115 | COVER ENGINE INLET OF PW2000 | 1 | |
| B757-200 | COVER-ENGINE INLET,RB211-535E4 | 1 | |
| B767-115 | ENGINE INLET COVER`S | 1 | |
| B777-100 | SPL-10698 COVER, INLET, GE 777-200F | 1 | |
| B777-115 | COVER, INLET, GE | 2 | |
| B787-105 | PROTECTIVE COVER - ENGINE INLET, GE | 1 | |
| B787-110 | INLET COVER (GENERAL ELECTRIC), Boeing Tool No: PREFAD48BENC54Z001, 8 ball lock attachment details | 1 | |
| B787-115 | INLET COVER (ROLLS ROYCE), Boeing Tool No: PREFAD48BENC54Z002, 8 ball lock attachment details | 1 | |
| B787-150 | PROTECTIVE COVER - ENGINE INLET, GE | 1 | |
| BBJ-2001-JB-R | ENGINE COVER SET INCLUDING INLET AND EXHAUST COVER | 1 | |
| BBJ-2001-JB-SDP | ENGINE COVER SET INCLUDING INLET AND EXHAUST COVER | 1 | |
| BBJ-2V | COVER ENGINE INLET , CFM56-7 | 1 | |
| BBJ-2V-L | Engine Inlet Cover - Left Hand | 1 | |
| C10005 | B737Max inlet cover( see C10005ASG) | 1 | |
| C10005 | Inlet Cover -CFM LEAP -1B | 1 | |
| C10005-1 | PROTECTIVE COVER EQUIPMENT - ENGINE INLET, CFM LEAP - 1B | 7 | |
| C10005-23 | COVER INLET ENGINE | 4 | |
| C10005-24 | Inlet cover assy | 1 | |
| C10005ASG | B737Max inlet cover | 1 | |
| C1005-23 | PROTECTIVE COVER EQUIPMENT - ENGINE INLET, CFM LEAP - 1B | 1 | |
| C500-100 | ENGINE COVERS (NO TR's, SMOOTH gen. inlet) (set of 4) | 1 | |
| C500-101 | ENGINE COVERS (NO TR's, PROTRUDING gen. inlet) (set of 4) | 1 | |
| C500-103 | INTAKE COVERS (PROTRUDING gen. inlet) (set of 2) | 1 | |
| C500-104 | ENGINE COVERS (Williams FJ44, Eagle II, w/smooth gen. inlet) (set of 4) | 1 | |
| C500-105 | ENGINE COVERS (Williams FJ44, Eagle II, w/protruding gen. inlet) (set of 4) | 1 | |
| C500-106 | INTAKE COVERS (SMOOTH gen. inlet) (set of 2) | 1 | |
| C500-110 | ENGINE COVERS (with TR's, SMOOTH gen. inlet) (set of 4) | 1 | |
| C500-111 | ENGINE COVERS (with TR's, PROTRUDING gen. inlet) (set of 4) | 1 | |
| C510-100 | ENGINE INLET COVERS & EXHAUST PLUGS, w/ intercooler plugs (set of 6) | 1 | |
| C510-105 | ENGINE INLET COVERS (set of 2) | 1 | |
| C510-150 | ENGINE COVERS, Hangar Use, Bikini type, w/ intercooler inlet plugs on l.e. of pylon (set of 4) | 1 | |
| C550-100 | INTAKE COVERS & EXHAUST PLUGS (specify gen. inlet) (recommended) (set of 4) | 1 | |
| C550-101 | ENGINE COVERS (NO TR's, PROTRUDING gen. inlet) (set of 4) | 10 | |
| C550-110 | ENGINE COVERS (NO TR's, SMOOTH gen. inlet) (set of 4) | 1 | |
| C550-150 | ENGINE COVERS (with TR's, SMOOTH gen. inlet) (set of 4) | 1 | |
| C550-151 | ENGINE COVERS (with TR's, PROTRUDING gen. inlet) (set of 4) | 1 | |
| C550-152 | INTAKE COVERS (PROTRUDING gen. inlet) (set of 2) | 1 | |
| C550-153 | INTAKE COVERS (SMOOTH gen. inlet) (set of 2) | 1 | |
| CF202 | 767 INLET COVER | 1 | |
| CF34-10-2V | COVER - ENGINE AIR INLET | 1 | |
| CF6 | INLET COVER - CF6-80A/80C2 ENGINES | 1 | |
| CF6-80 | 767 INLET COVER (KIT of 2) | 1 | |
| CF6-80C2 Inlet Cover | COVER - INLET, CF6-80C2 ENGINE | 1 | |
| CFM-101 | QEC OFF-LINK ENGINE SHIPPER/TRANSPORT, LONG-TERM STORAGE COVER "BAG" or "ENVELOPE", CFM-56-7B w/ or w/o Exhaust Cone, Fully enclosed under belly, w/ Nose Cone Inlet Cowl | 1 | |
| CFM-120 | OFF-LINK INLET COVER, CFM-56/F108 (one each) | 1 | |
| CFM56-5 COVER | COVER CFM56-5 ENGINE INLET (SOFT) | 1 | |
| CFM56-7 INLET COVER | CFM56-7 INLET COVER | 1 | |
| CFM56-7B-201 | 737 INLET COVER (LH) | 1 | |
| CFM56-7B-202 | 737 INLET COVER (RH) | 1 | |
| CH47-102 | FORWARD PYLON SIDE INLET (SPECIFY SNAP TYPE) COVERS (set of 2) | 1 | |
| CH47-103 | FORWARD PYLON TOP INLET SCREEN COVER | 1 | |
| CH47-104 | AFT PYLON C-BOX INLET COVER | 1 | |
| CH47-110 | FLIGHT CONTROL COOLING FAN INLET COVER | 1 | |
| CH47-120 | AFT TRANSMISSION COOLING FAN INLET COVER | 1 | |
| CH47-130 | AFT TRANSMISSION COOLING FAN INLET/EXHAUST COVER (set of 2) | 1 | |
| CH47-140 | FORWARD PYLON SNAP-ON INLET COVERS (set of 2) | 1 | |
| CITX100 | ENGINE INLET COVER | 1 | |
| CJ1-100 | ENGINE INLET COVERS & EXHAUST PLUGS, includes generator outlet and pylon plugs (specify if CJ1+ model) (set of 8) | 1 | |
| CJ1-105 | ENGINE INLET COVERS w/Small Pylon Plugs (set of 4) | 1 | |
| CJ1-106 | ENGINE INLET COVERS (specify if CJ1+ model) (set of 2) | 1 | |
| CJ2-100 | ENGINE INLET COVERS & EXHAUST PLUGS, CJ2 Models (set of 8) | 1 | |
| CJ2-102 | ENGINE INLET COVERS & EXHAUST PLUGS, CJ2+ Models (set of 10) | 1 | |
| CJ2-104 | ENGINE INLET COVERS W/ STARTER & PYLON PLUG (set of 6) | 1 | |
| CJ2-111 | ENGINE COVERS, Hangar Use, Bikini Type, includes Pylon Inlet plugs (set of 4) | 1 | |
| CJ3-100 | INTAKE COVERS & EXHAUST PLUGS (includes Engine Intake Covers, Exhaust Plugs, Pylon Inlet, Oil Outlet, and Pylon Exit plugs (set of 10) | 1 | |
| CJ3-102 | ENGINE COVERS (includes Engine Intake & Exhaust Cover, Pylon Inlet, Oil Outlet, and Pylon Exit plugs) (set of 10) | 1 | |
| CJ3-105 | ENGINE INLET COVERS w/Small wedge plugs (set of 6) | 1 | |
| CJ4-100 | ENGINE INLET COVERS & EXHAUST PLUGS (set of 6) | 1 | |
| CPS737MXARR-1 | COVER, ENGINE INLET - LEAP 1B | 3 | |
| CPS737NGARR | ENGINE COVER SET INCLUDING INLET AND EXHAUST COVER | 4 | |
| CPS737NGARR-1 | COVER - ENGINE INLET, CFM56-7 | 3 | |
| CPS737NGARR1 | COVER ENGINE INLET , CFM56-7 | 3 | |
| CPS737NGARR2 | 737 NG COVER & PLUG SET - FULL COVER PLUG SET WITH INLET COVER, THRUST REVERSER & EXHAUST PLUGS, APU | 3 | |
| CPS7NGARR-1 | COVER-ENGINE INLET CFM56-7-B737-150 | 1 | |
| E130-010 | BUBBLE COVER, extends to cover fwd engine inlet | 1 | |
| E130-105 | OIL COOLER INLET COVER | 1 | |
| E130-820 | TRAVEL COVER, Light Weight Travel Bubble Cover, extends to cover fwd engine inlet | 1 | |
| E145-105 | BARRIER INLET FILTER COVER | 1 | |
| EMB-00134-001 | COVER, PROTECTION AIR INLET | 2 | |
| EMB-00136-001 | Turbine Air Inlet Cover | 1 | |
| EMB/L-2V | ENGINE INLET COVERS | 1 | |
| EMB00134-001 | COVER AIR INLET | 2 | |
| EUF-100 | MAIN ENGINE INLET COVER | 1 | |
| F15-100 | ENGINE INLET COVERS, NSN: 1730-01-681-4502 (set of 2) | 1 | |
| F18-100 | ENGINE INLET COVERS, HORNET (set of 2) | 1 | |
| F18-101 | ENGINE INLET COVERS, SUPER HORNET (set of 2) | 1 | |
| F18-300 | INLET COVERS, Mesh/Netting Type (set of 2) | 1 | |
| F70163 | ENGINE INLET COVER FAN EXIT COVER USED TO | 1 | |
| F70164 | ENGINE INLET COVER USED TO PREVENT DAMAGED | 1 | |
| F72717 | ENGINE INLET COVER | 1 | |
| F72717 ILC | COVER INLET | 1 | |
| F72718 | Cover Inlet Engine Ctr | 3 | |
| FC-GE90-11B-EIC | COVER-ENGINE INLET | 4 | |
| FC-GE9011BEIC | ENGINE INLET COVER | 4 | |
| FC-GE90EIC | COVER INLET ENGINE | 3 | |
| FC-PW4084EIC | COVER INLET ENGINE | 1 | |
| FC-RRT800EIC | COVER INLET ENGINE | 5 | |
| FCGE90E1C | Cover - GE90 Engine Inlet Cover | 1 | |
| FCGE90EIC | COVER - INLET | 3 | |
| FMF01-35-51000 | ENGINE AIR INLET COVER | 1 | |
| FTN-00249-00 | COVER - INLET FOR CF6-80C2 ENGINE | 1 | |
| FY5-6706W09-12 | COVER-CLIMA COMPARTMENT VENT INLET | 1 | |
| G-450-2V | G450 ENGINE INLET PARASOL-TYPE COVER | 1 | |
| G10001-1 | COVER - PT2 ENGINE INLET PRESSURE PROBE | 1 | |
| G10003-1 | PROTECTIVE COVER - ENGINE INLET, GE GEnx-2B | 5 | |
| G10007-1 | PROTECTIVE COVER - ENGINE INLET DE-ICING, GE GEnx-2B | 2 | |
| G10007-2 | Protective Cover - Engine Inlet De-Icing GENnx-2B | 1 | |
| G1001010019-001 | ECS INLET COVER | 2 | |
| G4-100 | ENGINE INLET FACBRIC COVER | 1 | |
| G601R101218-1 | COVER - ENGINE INLET (ACS87015) | 4 | |
| GE-102 | QEC OFF-LINK ENGINE STORAGE/TRANSPORT COVER, GE CF-6, w/ Inlet Ring and Exhaust Cone, Fully enclosed under belly | 1 | |
| GSB1000003 | COVER - ENGINE INLET | 1 | |
| GSE1000391 | ENGINE INLET COVER-GSE1000391 | 1 | |
| GSE1000530 | INLET VENT COVER(UPPER COWL) | 1 | |
| GSE1000533 | NACELLE AIR INLET COVER | 1 | |
| GSE247 | ENGINE INLET COVER | 1 | |
| GSE4920102 | APU ENGINE AIR INLET COVER | 1 | |
| GSE4920103 | APU COOLING AIR INLET COVER | 1 | |
| H-1402-01 | Filter, Inlet Cover | 2 | |
| HSA915166 | COVER,AIR INLET | 1 | |
| HU82353 | COVER INLET COWL | 6 | |
| HU82353-S | COVER INLET COWL | 1 | |
| HU89000 | COVER INLET COWL | 2 | |
| HU89022 | COVER INLET COWL | 1 | |
| HU89022-2 | Trent 700 Inlet cover | 9 | |
| I10233AR | ENGINE COVER SET INCLUDING INLET AND EXHAUST COVER | 1 | |
| IAE1F10227 | COVER-INLET | 12 | |
| IAE1J12183 | COVER INLET ENGINE | 8 | |
| IAE1N120400 | COVER INLET COWL | 1 | |
| IAE1N20027 | COVER, INLET | 1 | |
| IAE1N2009 | COVER-INLET COWL | 1 | |
| IAE1N20400 | COVER-INLET COWL | 10 | |
| IAE1N20403 | SUSPENSION-INLET COVER | 24 | |
| IAE5J12083 | IAE INLET COVER (1EA) | 5 | |
| J21008 | DISPATCH EQPT-COVER PLATE,RAM AIR INLET | 1 | |
| J21008-1 | DISPATCH EQUIPMENT - COVER PLATE RAM AIR INLET | 1 | |
| J21008-7 | DISPATCH EQUIPMENT - COVER PLATE, RAM AIR INLET | 8 | |
| J21011-1 | DISPATCH COVER PLATE - RAM AIR INLET DOOR | 2 | |
| J21011-2 | DISPATCH COVER PLATE - RAM AIR INLET DOOR | 2 | |
| JB-AE3007A1-2V | ENGINE AIR INLET COVER(DUEL-VENTED) | 1 | |
| JB-CF34-10-2V | ENGINE AIR INLET COVER | 1 | |
| JB-CFM-56-7-2V | ENGINE INLET COVERS L&R | 1 | |
| JT8D-217-2V | Inlet Covers | 1 | |
| K10007 | PROTECTIVE COVER-ENGINE INLET,GE GENX | 1 | |
| K10007-1 | PROTECTIVE COVER - ENGINE INLET, GENERAL ELECTRIC GEnx | 7 | |
| K10007-12 | PROTECTIVE COVER-ENGINE INLET,GE GENX | 1 | |
| K10007-2 | Inlet Cover - GEnx | 1 | |
| K10007-4 | PROTECTIVE COVER-ENGINE INLET,GE GENX | 1 | |
| K10007-5 | PROTECTIVE COVER-ENGINE INLET,GE GENX | 1 | |
| K10011 | PROTECTIVE COVER ENGINE INLET RR TRENT 1000 | 1 | |
| K10011-1 | PROTECTIVE COVER - ENGINE INLET, RR TRENT 1000 | 5 | |
| K10011-2 | Inlet Cover RR | 1 | |
| KC46-105 | COVER - INLET, PW4000 ENGINE | 1 | |
| L45-101 | ENGINE COVERS (w/fuel vent & Dorsal inlet plugs) (set of 6) | 1 | |
| L45-109 | ENGINE COVERS (w/dorsal inlet, fuel vent & air vent plugs) (set of 7) | 1 | |
| L45-115 | INSULATED ENGINE COVERS, fully enclose the engine nacelle (w/dorsal inlet, fuel vent & air vent plugs) (set of 5) | 1 | |
| L45-125 | EMPENNAGE SADDLE COVER W/ DORSAL INLET PLUG (covers upper fuselage between pylons, ACM/APU area) (set of 2) | 1 | |
| LJ29802 | COVER - INLET - RB211-524 ENGINE | 1 | |
| LJ34924 | ENGINE COWL INLET COVER TOOL | 4 | |
| LMC11G84-1 | ENGINE INLET COVER | 8 | |
| LMC11G84-2 | Cover - Engine Inlet, CFM56-3 | 8 | |
| LMC16M87 | 767 INLET COVER | 5 | |
| LMC17D84 | COVER - ENGINE INLET -PW2000 | 1 | |
| LMC17D84 | COVER ENGINE INLET OF PW2000 | 1 | |
| LMC18G87 | Cover - Inlet, CF6-80C2 Engine | 4 | |
| LMC18G87-K | COVER INLET CF6-80C2 ENGINE SET OF 2 | 1 | |
| LMC18G87B | COVER CF6-80C2 ENGINE INLET | 1 | |
| LMC18m87-1 | CFM56-3 INLET COVERS | 1 | |
| LMC19G87 | Cover - Inlet, CF6-80C2 Engine | 4 | |
| LP3-100 | MAIN ENGINE INLET PLUGS, NSN 1730-01-554-0658 "COVER,AIRCRAFT GROUND SERVICING" (set of 4) | 1 | |
| LP3-110 | OIL COOLER INLET PLUGS, NSN 1730-01-554-0659 "COVER,AIRCRAFT GROUND SERVICING", NATO STOCK NUMBER: 1730-20-A0Y-8488 (set of 4) | 1 | |
| LP3-120 | PITOT & PLUGS SET (2 pitot covers, 1 transducer probe cover, 2 heat exchanger inlet plugs) (set of 5) | 1 | |
| LPC12J82 | Cover - Inlet, CF6-80a Engine Protective | 2 | |
| LPC12J82-K | INLET COVERS CF6-80A SET OF 2 | 1 | |
| LPC20H82 | COVER INLET ENGINE | 2 | |
| M135-220 | APU INLET COVER, ram air spade | 1 | |
| M135-221 | APU INLET COVER, oval scoop | 1 | |
| M170-110 | ENGINE INLET COVERS (set of 2) | 1 | |
| M190-300 | APU COVER & PLUG SET (APU Inlet, Exhaust, and Heat Exchanger) (set of 3) | 1 | |
| M47E-240 | FWD PYLON INLET COVER | 1 | |
| M47G-240 | FWD PYLON INLET COVER | 1 | |
| MD80-100 | ENGINE INLET COVERS, V2500 Engines (set of 2) | 1 | |
| MD80-145 | ENGINE INLET COVERS, screen mesh center, large JT8-D (set of 2) | 1 | |
| MD900-125 | FULL ENGINE AREA/DOGHOUSE COVER, covers air inlets and exhaust turbines, closes at the base of the main rotor hub | 1 | |
| MGP-100 | ROTOR MAST INLET PLUGS/PITOT COVER (set of 2) | 1 | |
| MI17-105 | ENGINE INLET COVERS & Doghouse Inlet plug, for Inlet Baffle (set of 3) | 1 | |
| MPN0161 | Engine inlet cover CFM56-5a | 1 | |
| MQ4-100 | INTAKE COVER w/2 RBF Streamers, includes RAM air inlet plug (set of 2) | 1 | |
| MQ4-600 | COVER SET STORAGE BAG, w/ "RQ-4 Inlet/Exhaust covers" imprint, BAMS Model | 1 | |
| MQ8B-220 | SWASH PLATE INLET COVER | 1 | |
| NAS1581A3T10 | TOOL, SHIPPING COVER CPRSR INLET | 1 | |
| NCS67008 | INLET COWL COVER-NCS67008 | 1 | |
| NEISC1 | COVER: INLET,ENGINE,P2T2 SENSORS, TRENT 900 | 2 | |
| OHSS-212-070-112-001 | LH INLET COVER | 1 | |
| OHSS-212-070-112-002 | RH INLET COVER | 1 | |
| ORB787-150 | PROTECTIVE COVER- ENGINE INLET B787-8 GENIX (GE) | 1 | |
| P.W.-2000 | 757 INLET COVER P.W.-2000 | 2 | |
| P.W.-2000-101 | 757 INLET COVER P.W.-2000(LH) | 1 | |
| P.W.-2000-102 | 757 INLET COVER P.W.-2000(RH) | 1 | |
| P.W.-4000 | 767 INLET COVER P.W.-4000 | 2 | |
| P.W.-4000-203 | 767 INLET COVER P.W.-4000 | 1 | |
| P180-105 | ENGINE INLET PLUGS, with "lips" cover extension (set of 2) | 1 | |
| P31T-101 | ENGINE INLET PLUGS (American Aviation Ram Air Recovery Kit, curved bottom) (set of 2) | 1 | |
| P40211619 | ENGINE INLET COVER | 1 | |
| P60305 | COVER-SHIPPING (FUEL PUMP INLET) | 1 | |
| P60354 | COVER SHIPPING - FUEL HOSE INLET | 1 | |
| P60434 | COVER SHIPPING - A/O COOLER DUCT INLET | 1 | |
| P60500 | COVER, SHIPPING - A/O COOLER DUCT, INLET | 1 | |
| P60518 | COVER, SHIPPING - INLET | 1 | |
| PA24-120 | ENGINE COVER (oval carb inlet) | 1 | |
| PA24-121 | INSULATED ENGINE COVER (oval carb inlet) | 1 | |
| PA24-122 | ENGINE COVER, oval carb inlet, partially covers nose gear well | 1 | |
| PA24-123 | ENGINE COVER (rectangular carb inlet) | 1 | |
| PA24-124 | INSULATED ENGINE COVER (rectangular carb inlet) | 1 | |
| PC24-100 | ENGINE INLET COVERS & EXHAUST PLUGS (set of 4) | 1 | |
| PC24-101 | ENGINE INLET COVERS (set of 2) | 1 | |
| PC24-105 | ENGINE INLET COVERS & EXHAUST PLUGS, with starter inlet plugs (set of 6) | 1 | |
| PH3-100 | ENGINE INLET COVERS & EXHAUST PLUGS (set of 4) | 1 | |
| PH3-101 | ENGINE INLET COVERS (set of 2) | 1 | |
| PH3-105 | ENGINE INLET COVERS & EXHAUST PLUGS (includes lower nacelle plug) (set of 6) | 2 | |
| PWA85168 | PROTECTOR COVER INLET CORE | 1 | |
| PWA88060 | COVER-INLET COWL | 4 | |
| PWA88063 | COVER-INLET COWL | 1 | |
| PWC30128-08 | PULLER OIL PUMP INLET COVER | 7 | |
| PWC30128-8 | PULLER, OIL PUMP INLET COVER | 2 | |
| PWC32350 | ENGINE INLET PROTECTIVE COVER | 1 | |
| PWC37554 | Puller, Oil Pump Inlet Cover | 5 | |
| RQ4-100 | INTAKE COVER, includes generator inlet plug, NSN 1680-01-603-0981 (set of 2) | 1 | |
| RQ4-600 | COVER SET STORAGE BAG, w/ "RQ-4 Inlet/Exhaust Covers" imprint, NSN: 1730-01-616-1724 | 1 | |
| RSE 6401 | COVER - ENGINE AIR INLET | 2 | |
| RSE-1061-1A | Cover- - Engine Inlet Cowl | 1 | |
| RSE1016 | COVER-ENGINE INLET | 3 | |
| RSE1016 REV A | COVER, PROTECTIVE - ENGINE INLET | 1 | |
| RSE1016-1 | COVER INLET ENGINE | 1 | |
| RSE1032 | COVER-INLET COWL ENGINE | 2 | |
| RSE1032 REV B | COVER INLET | 1 | |
| RSE1061 | COVER-ENGINE INLET | 3 | |
| RSE1061 REV NC | COVER, PROTECTIVE - ENGINE INLET | 1 | |
| RSE1061-1A | Cover Inlet | 1 | |
| RSE1062 | COVER COWL INLET ENG | 4 | |
| RSE1104 | COVER, PROTECTIVE - ENGINE INLET COWL | 3 | |
| RSE1104 REV B | COVER, PROTECTIVE - ENGINE INLET COWL | 1 | |
| RSE1114 | COVER, INLET COWL | 7 | |
| RSE1114 REV NC | COVER, INLET COWL | 1 | |
| RSE1115 | COVER COWL INLET ENG | 11 | |
| RSE1231 | COVER INLET | 1 | |
| RSE1231 REV A | COVER INLET | 1 | |
| RSE1237 | COVER - INLET | 6 | |
| RSE1237 REV NC | COVER PROTECTIVE ENGINE INLET | 1 | |
| RSE1244 | COVER - INLET COWL ENGINE | 11 | |
| RSE3406 | COVER-INLET COWL | 5 | |
| RSE3406 REV NC | COVER INLET COWL | 1 | |
| RSE3407 | COVER COWL INLET ENG | 6 | |
| RSE3409 | COVER-INLET SCOOP | 3 | |
| RSE6401 | COVER - ENGINE AIR INLET | 2 | |
| RSE7104 | COVER, INLET COWL | 1 | |
| RSE7104 REV NC | COVER, INLET COWL | 1 | |
| RSEI032 | COVER INLET | 1 | |
| RSEI06I | COVER, PROTECTIVE - ENGINE INLET | 1 | |
| RSEI0I6 | COVER, PROTECTIVE - ENGINE INLET | 1 | |
| RSEII04 | COVER, PROTECTIVE - ENGINE INLET COWL | 1 | |
| RSK 1488/118 | COVER, FUEL INLET | 1 | |
| S550-104 | ENGINE COVERS (Williams FJ44, w/smooth gen. inlet) (set of 4) | 1 | |
| S550-106 | ENGINE COVERS (Williams FJ44, w/protruding gen. inlet) (set of 4) | 1 | |
| S7E06B767PVC8XXXRED1 | COVER - INLET FOR CF6-80C2 ENGINE | 1 | |
| SAL-03768-401 | COVER - ENGINE AIR INLET | 1 | |
| SCA-LMC18G87B | INLET COVER - CF6-80A/80C2 ENGINES | 1 | |
| SCA-WL14L96A | COVER ENGINE INLET , CFM56-7 | 1 | |
| SJ30-110 | ENGINE INLET COVERS & EXHAUST PLUGS (set of 4) | 1 | |
| SJ30-115 | ENGINE INLET COVERS (set of 2) | 1 | |
| SPL-10698 | Inlet cover GE | 1 | |
| SPL-14650 | PROTECTIVE COVER EQUIPMENT - ENGINE INLET, CFM LEA | 1 | |
| SPL-8854 | ADAPTER - PULLER, OIL INLET COVER | 1 | |
| T34-110 | AIR FILTER INLET COVER | 1 | |
| UH72-105 | BARRIER INLET FILTER COVER | 1 | |
| V2500 COVER | COVER V2500 ENGINE SET - INLET & EXHAUST | 1 | |
| V2500COVER | COVER V2500 ENGINE SET - INLET & EXHAUST | 1 | |
| WL12E98 | COVER - INLET | 1 | |
| WL14L96 | INLET ENG COVER | 2 | |
| WL14L96A | COVER Inlet CFM56-7 | 8 | |
| WL14L96ATUI | COVER - ENGINE INLET, CFM56-7 | 1 | |
| WL15L96A | INLET COVER CFM | 7 | |
| WL20D93 | Inlet cover PW4084 & PW4090 | 1 | |
| WL23J97 | Inlet Cover RB211-535E | 1 | |
| WL24D93 | COVER INLET ENGINE | 1 | |
| WMI11D89 | COVER - ENGINE INLET | 1 | |
| IAE1N20400 | COVER-INLET COWL ENGINE | 10 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
