| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| PWC90320 | I WRENCH 30 | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 6060A (10-50 IN.LBS) | TORQUE WRENCH 0513060458 TOOL CALIBRATION REMARK : INCLUDE ATTACHED (CALIBRATION) | 1 | |
| (CALIB) 730N/10 | 730N/10 T/WRENCH 20-100NM (CALIBRATION) | 2 | |
| (CALIB) TER175 | TORQUE WRENCH - 175 ft-lb/230 Nm - 1/2 DRIVE TOOL - Renommé A44076 | 1 | |
| 0300LBSFT | TORQUE WRENCH 3/4 DRIVE 20-300 LBS FT | 1 | |
| 0300lbsft | Torgue wrench 3/4 drive 20-300 lbs ft | 1 | |
| 069210095:1931A | WRENCH,TORQUE:30-150 IN-LB | 1 | |
| 1240 | 1-1/4 INCH CHROME 30 DEGREE ANGLE SERVICE WRENCH | 1 | |
| 11004 | WILLIAMS 11 Piece Combination Wrench Set ***SAVE 30%*** | 1 | |
| 185-0622 | MODIFIED 30MM WRENCH CAT | 1 | |
| 2002MRMH | TORQUE WRENCH,MICROMTER ADJ,3/8 DR,30-200 IN LB | 3 | |
| 25003MRMHSS | TORQUE WRENCH 300-2500 INLBS | 1 | |
| 2502 MRMH | TORQUE WRENCH 2502 MRMH 3/8 DRIVE 30-250 IN LB | 3 | |
| 2502MRMH | TORQUE WRENCH 3/8-INCH DRIVE METAL HANDLE CLICK TYPE TORQUE RANGE 30 TO 250-INC | 3 | |
| 2502MRMH-CDI | TORQUE WRENCH 30-250INLB | 1 | |
| 2503MFRMH | TORQUE WRENCH 1/2 DR 30-250FTLB MICRO ADJ | 2 | |
| 2NCU6 | IMPACT WRENCH, 3/8 IN DR, 25-230 FT LB, HK | 1 | |
| 3002LDIN | TORQUE WRENCH, 0 - 300 INCH-POUNDS (0 - 33.90 NM) | 4 | |
| 30150TW38I | 30-150IN-LBS TORQUE WRENCH DOUBLE INSULATED | 1 | |
| 4205.3 | 30MM STRIKING FACE RING WRENCH | 1 | |
| 6068 | TORQUE WRENCH 300-1800 IN.LBS | 1 | |
| 6072 | TORQUE WRENCH 600-3000 LB.IN | 1 | |
| 8774 | BOTTLE - NITROGEN CART - SERVICING, STRUT OIL INFLATOR - STRUT, LANDING GEAR GAUGE - PRESSURE, 0-3000 PSIG (0-20685 KPA) WRENCH - TORQUE BUCKET - 2.5 GALLON CAPACITY | 1 | |
| 35036 | SOCKET WRENCH 1/2" - 30 MM LONG SERIE NON SPARKING Cu-Be (6 EDGES) | 1 | |
| 35037 | SOCKET WRENCH 1/2" - 30 MM LONG SERIE NON SPARKING Al-Bron (6 EDGES) | 1 | |
| 35132 | SOCKET WRENCH 1/2" - 30 MM LONG SERIE NON SPARKING Cu-Be (12 EDGES) | 1 | |
| 35133 | SOCKET WRENCH 1/2" - 30 MM LONG SERIE NON SPARKING Al-Bron (12 EDGES) | 1 | |
| 35200 | SOCKET WRENCH 3/4" - 30 MM LONG SERIE NON SPARKING Cu-Be (6 EDGES) | 1 | |
| 35201 | SOCKET WRENCH 3/4" - 30 MM LONG SERIE NON SPARKING Al-Bron (6 EDGES) | 1 | |
| 35294 | SOCKET WRENCH 3/4" - 30 MM LONG SERIE NON SPARKING Cu-Be (12 EDGES) | 1 | |
| 35295 | SOCKET WRENCH 3/4" - 30 MM LONG SERIE NON SPARKING Al-Bron (12 EDGES) | 1 | |
| 35384 | SOCKET WRENCH 1" - 30 MM LONG SERIE NON SPARKING (6 EDGES) | 1 | |
| 35385 | SOCKET WRENCH 1" - 30 MM LONG SERIE NON SPARKING Al-Bron (6 EDGES) | 1 | |
| 35482 | SOCKET WRENCH 1" - 30 MM LONG SERIE NON SPARKING Cu-Be (12 CANTOS) | 1 | |
| 35483 | SOCKET WRENCH 1" - 30 MM LONG SERIE NON SPARKING Al-Bron (12 EDGES) | 1 | |
| 35784 | TAMPER TORX WRENCH TT30 NON SPARKING Cu-Be | 1 | |
| 35785 | TAMPER TORX WRENCH TT30 NON SPARKING Al-Bron | 1 | |
| 35794 | PODGING WRENCH 30-32 MM NON SPARKING Cu-Be | 1 | |
| 35795 | PODGING WRENCH 30-32 MM NON SPARKING Al-Bron | 1 | |
| 36023 | BOTTLE - NITROGEN CART - SERVICING, STRUT OIL INFLATOR - STRUT, LANDING GEAR GAUGE - PRESSURE, 0-3000 PSIG (0-20685 KPA) WRENCH - TORQUE BUCKET - 2.5 GALLON CAPACITY | 1 | |
| 36338 | OPEN END CROWFOOT WRENCH 1/2" - 30 MM NON SPARKING Cu-Be | 1 | |
| 36339 | OPEN END CROWFOOT WRENCH 1/2" - 30 MM NON SPARKING Al-Bron | 1 | |
| 36353 | OPEN END WRENCH FOR EXTENSION 30 MM NON SPARKING Cu-Be | 1 | |
| 36371 | OPEN END WRENCH FOR EXTENSION 30 MM NON SPARKING Al-Bron | 1 | |
| 36498 | OFFSET SLOGGING RING WRENCH 130 MM NON SPARKING Cu-Be | 1 | |
| 36499 | OFFSET SLOGGING RING WRENCH 130 MM NON SPARKING Al-Bron | 1 | |
| 36721 | SOCKET DOUBLE ENDED WRENCH 30-32 MM INOX SS420 | 1 | |
| 36743 | PODGING WRENCH 24-30 MM NON SPARKING Cu-Be | 1 | |
| 36754 | PODGING WRENCH 24-30 MM NON SPARKING Al-Bron | 1 | |
| 36804 | ADJUSTABLE WRENCH 30" NON SPARKING Cu-Be | 1 | |
| 36805 | ADJUSTABLE WRENCH 30" NON SPARKING Al-Bron | 1 | |
| 36974 | PODGING WRENCH 24-30 MM 1000 V | 1 | |
| 36975 | PODGING WRENCH 30-32 MM 1000 V | 1 | |
| 37110 | SLOGGING RING WRENCH 30 MM NON SPARKING Cu-Be (6 EDGES) | 1 | |
| 37111 | SLOGGING RING WRENCH 30 MM NON SPARKING Al-Bron (6 EDGES) | 1 | |
| 37144 | SLOGGING RING WRENCH 130 MM NON SPARKING Cu-Be (6 EDGES) | 1 | |
| 37145 | SLOGGING RING WRENCH 130 MM NON SPARKING Al-Bron (6 EDGES) | 1 | |
| 38114 | COMBINATION WRENCH 30 MM INOX SS420 | 1 | |
| 38221 | SOCKET WRENCH 1/2" - 30 MM INOX SS420 (6 EDGES) | 1 | |
| 38228 | SOCKET WRENCH 1/2" - 30 MM LONG SERIE INOX SS420 (6 EDGES) | 1 | |
| 38519 | SOCKET WRENCH 1/2" - 30 MM INOX SS420 (12 EDGES) | 1 | |
| 38566 | SOCKET WRENCH 1/2" - 30 MM LONG SERIE INOX SS420 (12 EDGES) | 1 | |
| 38656 | OPEN END WRENCH 27 - 30 MM INOX SS420 | 1 | |
| 38681 | SOCKET WRENCH 3/4" - 30 MM INOX SS420 (6 EDGES) | 1 | |
| 38719 | SOCKET WRENCH 3/4" - 30 MM INOX SS420 (12 EDGES) | 1 | |
| 38757 | SOCKET WRENCH 3/4" - 30 MM LONG SERIE INOX SS420 (6 EDGES) | 1 | |
| 38795 | SOCKET WRENCH 3/4" - 30 MM LONG SERIE INOX SS420 (12 EDGES) | 1 | |
| 38857 | TORX KEY WRENCH T-30 INOX SS420 | 1 | |
| 38883 | DOUBLE OFFSET RING WRENCH 30 - 32 MM INOX SS420 | 1 | |
| 39023 | OPEN END WRENCH 30 - 32 MM INOX SS420 | 1 | |
| 39041 | HOOK WRENCH 30 - 32 MM INOX SS420 | 1 | |
| 3AA3600 | BOTTLE - NITROGEN CART - SERVICING, STRUT OIL INFLATOR - STRUT, LANDING GEAR GAUGE - PRESSURE, 0-3000 PSIG (0-20685 KPA) WRENCH - TORQUE BUCKET - 2.5 GALLON CAPACITY | 1 | |
| 4SDR-1800I | TORQUE WRENCH 300-1800 IN/LB | 1 | |
| 53430 | IMPACT SOCKET WRENCH 1" - 30 MM (12 EDGES) | 1 | |
| 53435 | IMPACT SOCKET WRENCH 1" - 30 MM LONG SERIE (12 EDGES) | 1 | |
| 53494 | IMPACT SOCKET WRENCH 3/4" - 30 MM (12 EDGES) | 1 | |
| 53511 | IMPACT SOCKET WRENCH 3/4" - 30 MM LONG SERIE (12 EDGES) | 1 | |
| 53582 | IMPACT SOCKET WRENCH 1.1/2" - 130 MM LONG SERIE (12 EDGES) | 1 | |
| 53674 | IMPACT SOCKET WRENCH 1.1/2" - 130 MM (12 EDGES) | 1 | |
| 53737 | IMPACT SOCKET WRENCH 2.1/2" - 130 MM (12 EDGES) | 1 | |
| 53841 | IMPACT SOCKET WRENCH 3.1/2" - 130 MM (12 EDGES) | 1 | |
| 53861 | IMPACT SOCKET WRENCH 3.1/2" - 230 MM (12 EDGES) | 1 | |
| 54953 | CURVED SLOGGING RING WRENCH 30 MM | 1 | |
| 55003 | OFFSET SLOGGING RING WRENCH 30 MM PHOSPHATED (12 EDGES) | 1 | |
| 55025 | OFFSET SLOGGING RING WRENCH 130 MM PHOSPHATED (12 EDGES) | 1 | |
| 55839 | PNEUMATIC RACHET WRENCH 1/4" 30 Nm | 1 | |
| 56126 | IMPACT SOCKET WRENCH 1.1/2" - 130 MM LONG SERIE (6 EDGES) | 1 | |
| 56221 | TORQUE WRENCH 6.0 -30 Nm (50-250Lb.in) CONNECTION 9x12 mm | 1 | |
| 56223 | TORQUE WRENCH 40-200 Nm (30-150Lb.ft) CONNECTION 14x18 mm | 1 | |
| 56224 | TORQUE WRENCH 80-400 Nm (60-300 Lb.in) CONNECTION 14x18 mm | 1 | |
| 56242 | TORQUE WRENCH 4 -20 Nm (30-180 Lb.in) CONNECTION 9 X 12 MM | 1 | |
| 56291 | ADJUSTABLE HEAD OPENING 5-30 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56299 | SLIM OPEN END WRENCH 30 X 32 MM | 1 | |
| 56301 | SLOGGING RING WRENCH THIN WALL 30 MM | 1 | |
| 56429 | EXTRA LONG COMBINATION WRENCH 30 MM AEROSPATIAL CHROME PLATING | 1 | |
| 56440 | TORQUE WRENCH WITH 8" STILLSON HEAD (30-150 Nm) | 1 | |
| 56494 | INTERCHANGEABLE TORQUE WRENCH 300 - 1500 Nm / 200 - 1100 Lb.ft CONNECTION 27 X 36 MM | 1 | |
| 56495 | INTERCHANGEABLE TORQUE WRENCH 400 - 2000 Nm / 300 - 1500 Lb.ft CONNECTION 27 X 36 MM | 1 | |
| 56496 | INTERCHANGEABLE TORQUE WRENCH 600 - 3000 Nm / 400 - 2200 Lb.ft CONNECTION 27 X 36 MM | 1 | |
| 56522 | BOX END HEAD 30 MM - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 56536 | OPEN BOX END HEAD 30 MM - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 56572 | 1" SQUARE DRIVE HYDRAULIC WRENCH 447-4514 Nm 330- 3330 ft/lbs | 1 | |
| 56581 | 2.1/2" SQUARE DRIVE HYDRAULIC WRENCH 2630 - 27964 Nm 1940-20625 ft/lbs | 1 | |
| 56908 | SOCKET WRENCH 3/4" - 30 MM LONG SERIE (6 EDGES) | 1 | |
| 5718A42 | WRENCH - TORQUE, 30 IN-LBS (4 N-M)0 | 1 | |
| 57193 | IMPACT SOCKET WRENCH 3/4" - 30 MM (4 EDGES) | 1 | |
| 57202 | IMPACT SOCKET WRENCH 1" - 30 MM (4 EDGES) | 1 | |
| 57541 | DIGITAL MINI TORQUE WRENCH 1/4" 1,5 - 30 Nm CONNECTION 9 X 12 MM with data communication | 1 | |
| 57542 | DIGITAL MINI TORQUE WRENCH 1,5 - 30 Nm CONNECTION 9 X 12 MM with data communication | 1 | |
| 57548 | PODGING WRENCH 30-32 MM | 1 | |
| 57585 | DIGITAL TORQUE WRENCH 1,5 - 30 Nm CONNECTION 9 X 12 MM without data communication | 1 | |
| 57589 | DIGITAL TORQUE WRENCH 1,5 - 30 Nm CONNECTION 9 X 12 MM with data communication | 1 | |
| 57833 | REVERSIBLE RATCHET TAP WRENCH M5--M12 G (300 MM) _x000D_ | 1 | |
| 58407 | CURVED OPEN END SLOGGING WRENCH 30 MM | 1 | |
| 58508 | INTERCHANGEABLE HEADS REVERSIBLE PRESET TORQUE WRENCH 14 X 18 - 40-200 Nm (30-150 lb.ft) | 1 | |
| 58510 | INTERCHANGEABLE HEADS REVERSIBLE PRESET TORQUE WRENCH 9 X 12 - (4-20 Nm) (30 - 180 Lb.in) | 1 | |
| 58512 | INTERCHANGEABLE HEADS REVERSIBLE PRESET TORQUE WRENCH 14 X 18 - (50-300 Nm) (40 - 225 Lb.ft) | 1 | |
| 58690 | SET OF 30 PCS. - SOCKET WRENCHES 1/4" (4 - 13 MM AND 5/32" - 9/16" LONG SERIE) 6 EDGES | 1 | |
| 58691 | SET OF 30 PCS. - SOCKET WRENCHES 1/4" (5/32" - 9/16" AND 5/32" - 9/16" LONG SERIE) 6 EDGES | 1 | |
| 58764 | DIGITAL ANGLE TORQUE WRENCH 1,5-30 Nm AND 1- 360º CONNECTION 9 X 12 MM WITH RF WIRELESS DATA COMMUNICATION (WITH PAL MODE) | 1 | |
| 58767 | DIGITAL TORQUE WRENCH 1/4" 1,5 - 30 Nm CONNECTION 9 X 12 MM WITH RF WIRELESS DATA COMMUNICATION | 1 | |
| 58775 | DIGITAL TORQUE AND ANGLE WRENCH 1/4" 1,5-30 Nm & 1-360º CONNECTION 9 X 12 MM WITH DATA COMMUNICATION | 1 | |
| 59014 | DIGITAL TORQUE AND ANGLE WRENCH 1,5-30 Nm & 1-360º CONNECTION 9 X 12 MM WITH DATA COMMUNICATION | 1 | |
| 59138 | TORQUE CHECKING QC WRENCH 1/4" 1,5 -30 NM with data communication | 1 | |
| 59176 | DIGITAL QC ANGLE TORQUE WRENCH 1,5-30 Nm AND 1-360º CONNECTION 9 X 12 MM WITH BLUETOOTH DATA COMMUNICATION (WITH PAL MODE) | 1 | |
| 59197 | REV. ALUMINIUM TORQUE WRENCH 1" 300 - 1500 Nm (200 - 1100 lb.ft) | 1 | |
| 59198 | REV. ALUMINIUM TORQUE WRENCH 1" 400 - 2000 Nm (300 - 1500 lb.ft) | 1 | |
| 59199 | ALUMINIUM TORQUE WRENCH 1.1/2" 600 - 3000 Nm (400 - 2000 lb.ft) | 1 | |
| 59228 | SET OF ALUMINIUM TORQUE WRENCH 1.1/2" 600 - 3000 Nm (400 - 2000 lb.ft) REVERSIBLE RATCHET ADAPTER 1.1/2 | 1 | |
| 59283 | REVERSIBLE STEEL MICROMETER TYPE TORQUE WRENCH 3/8" 6 - 30 Nm (50 - 250 Lb.in) | 1 | |
| 59287 | REVERSIBLE STEEL MICROMETER TYPE TORQUE WRENCH 1/2" 80 - 400 Nm (60 - 300 Lb.ft) | 1 | |
| 59289 | REVERSIBLE STEEL MICROMETER TYPE TORQUE WRENCH 1" 400 - 2000 Nm (300 -1500 Lb.ft) | 1 | |
| 59290 | REVERSIBLE STEEL MICROMETER TYPE TORQUE WRENCH 1" 600 - 3000 Nm (400 -2000 Lb.ft) WITH EXTENSION | 1 | |
| 59292 | DIGITAL MINI QC ANGLE TORQUE WRENCH 1,5 - 30 Nm AND 1-360º CONNECTION 9 X 12 MM WITH RF DATA COMMUNICATION | 1 | |
| 59600 | IMPACT SOCKET WRENCH 1/2" - 30 MM (4 EDGES) | 1 | |
| 59609 | BATTERY TORQUE WRENCH 3/4" 150 – 1400 Nm (110-1030 ft.lbs) WITH TORQUE MEASUREMENT(set with 2 batteries, charger and standard reaction arm) | 1 | |
| 59610 | BATTERY TORQUE WRENCH 1" 250 – 1800 Nm (190 -1330 ft.lbs) WITH TORQUE MEASUREMENT (set with 2 batteries, charger and standard reaction arm) | 1 | |
| 6018AB | TORQUE WRENCH 60-300 FT IBS (STANLEY PROTO 6018AB) | 1 | |
| 60618 | IMPACT SOCKET WRENCH 1/2" - 30 MM (6 EDGES) | 1 | |
| 60629 | IMPACT SOCKET WRENCH 3/4" - 30 MM (6 EDGES) | 1 | |
| 60675 | IMPACT SOCKET WRENCH 1/2" - 30 MM LONG SERIE (6 EDGES) | 1 | |
| 60685 | IMPACT SOCKET WRENCH 3/4" - 30 MM LONG SERIE (6 EDGES) | 1 | |
| 60693 | SET OF 10 IMPACT SOCKET WRENCHES 1/2" (13 - 30 MM) (6 EDGES) | 1 | |
| 6072C | 1/2"DRIVE RATCHETING HEAD MICROMETE / 1/2" DRIVE RATCHETING HEAD MICROMETER TORQUE WRENCH 600-3000 IN-LBS | 1 | |
| 60832 | OPEN-END WRENCH 24 - 30 MM DIN-895 PHOSPHATED | 1 | |
| 60833 | OPEN-END WRENCH 27 - 30 MM DIN-895 PHOSPHATED | 1 | |
| 60835 | OPEN-END WRENCH 30 - 32 MM DIN-895 PHOSPHATED | 1 | |
| 60836 | OPEN-END WRENCH 30 - 34 MM DIN-895 PHOSPHATED | 1 | |
| 60837 | OPEN-END WRENCH 30 - 36 MM DIN-895 PHOSPHATED | 1 | |
| 60873 | SLOGGING OPEN WRENCH 30 MM DIN-133 PHOSPHATED | 1 | |
| 60883 | SLOGGING RING WRENCH 30 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 61035 | REVERSIBLE CHAIN PIPE WRENCH 4" - L:300 MM | 1 | |
| 61039 | H.D. REVERSIBLE CHAIN PIPE WRENCH 10" - L: 1300 MM | 1 | |
| 61194 | ANGLED OPEN SOCKET WRENCH 6 x 6 30 MM TITACROM® | 1 | |
| 61582 | MASTERGEAR JOINT COMBINATION RATCHET WRENCH 30 MM MIRROR POLISHED CHROME PLATING | 1 | |
| 61613 | OPEN END WRENCH 30 - 32 MM MIRROR POLISHED CHROME PLATING | 1 | |
| 61649 | COMBINATION WRENCH 30 MM MIRROR POLISHED CHROME PLATING | 1 | |
| 61687 | DOUBLE OFFSET RING WRENCH 30 - 32 MM MIRROR POLISHED CHROME PLATING | 1 | |
| 61713 | OPEN END WRENCH 30 - 32 MM AEROSPATIAL CHROME PLATING | 1 | |
| 61749 | COMBINATION WRENCH 30 MM AEROSPATIAL CHROME PLATING | 1 | |
| 61787 | DOUBLE OFFSET RING WRENCH 30 - 32 MM AEROSPATIAL CHROME PLATING | 1 | |
| 61836 | SOCKET DOUBLE ENDED WRENCH 30-32 MM TITACROM® | 1 | |
| 61894 | ANGLED OPEN SOCKET WRENCH 12 X 6 30 MM MIRROR POLISHED CHROME PLATING | 1 | |
| 62024 | OPEN BOX END HEAD 30 MM - CONNECTION Ø 16 FOR TORQUE WRENCH | 1 | |
| 62678 | MASTERGEAR COMBINATION RATCHET WRENCH 30 MM MIRROR POLISHED CHROME PLATING | 1 | |
| 62955 | DIGITAL TORQUE WRENCH 1/4" 1,5 - 30 Nm without data communication | 1 | |
| 62959 | DIGITAL TORQUE WRENCH 1/4" 1,5 - 30 Nm with data communication | 1 | |
| 62963 | REVERSIBLE TORQUE WRENCH 1/2" 40 - 200 Nm (30-150 Lb.ft) | 1 | |
| 62965 | REVERSIBLE TORQUE WRENCH 3/8" 6- 30 Nm (50-250 Lb.in) | 1 | |
| 62977 | REVERSIBLE TORQUE WRENCH 1" 300 - 1500 Nm (200-1100 Lb.ft) | 1 | |
| 62978 | REVERSIBLE TORQUE WRENCH 1" 400 - 2000 Nm (300-1500 Lb.ft) | 1 | |
| 62979 | REVERSIBLE TORQUE WRENCH 1" 600 - 3000 Nm (400-2200 Lb.ft) | 1 | |
| 62980 | ADJUSTABLE WRENCH 30" TITACROM® | 1 | |
| 62983 | REVERSIBLE TORQUE WRENCH 1/2" 80 - 400 Nm (60-300 Lb.ft) | 1 | |
| 63927 | CLASSICGEAR COMBINATION RATCHET WRENCH 30 MM MIRROR POLISHED CHROME PLATING | 1 | |
| 64-032 | 30-200 IN LBS TORQUE WRENCH 1/4" DR. | 2 | |
| 64886 | BOX END HEAD 30 MM - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 64953 | OFFSET RING STRUCTURAL WRENCH 30 MM | 1 | |
| 65,710,050 | TORQUE WRENCH STAHLWILLE MANOSKOP 730/5 6-50NM | 1 | |
| 65079 | PODGING WRENCH 24-30 MM | 1 | |
| 65347 | TORX KEY WRENCH T-30 LONG SERIE EGA | 1 | |
| 65382 | OPEN END HEAD 30 MM CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 65443 | IMPACT SOCKET WRENCH 1.1/2" - 130 MM (6 EDGES) | 1 | |
| 65451 | EXTENSION 1.1/2" - 300 MM (12") FOR IMPACT SOCKET WRENCHES | 1 | |
| 65464 | IMPACT SOCKET WRENCH 2.1/2" - 130 MM (6 EDGES) | 1 | |
| 65536 | IMPACT SOCKET WRENCH 1" - 30 MM (6 EDGES) | 1 | |
| 65541 | IMPACT SOCKET WRENCH 1" - 30 MM LONG SERIE (6 EDGES) | 1 | |
| 65909 | EXTENSION FOR RING WRENCH 21 - 30 MM (3/4 - 1.1/8") | 1 | |
| 65918 | TORQUE WRENCH 1/2" 1000- 3000 Lb-in | 1 | |
| 66002 | TORQUE WRENCH 6.0 -30 Nm (50-250 Lb.in) CONNECTION Ø 16 | 1 | |
| 66004 | TORQUE WRENCH 40 - 200 Nm (30 - 150 Lb.ft) CONNECTION Ø 16 | 1 | |
| 66006 | TORQUE WRENCH 80 - 400 Nm (60 - 300 Lb.ft) CONNECTION Ø 16 | 1 | |
| 66034 | BOX END HEAD 30 MM - CONNECTION Ø16 FOR TORQUE WRENCH | 1 | |
| 66217 | OPEN END HEAD 30 MM CONNECTION Ø 16 FOR TORQUE WRENCH | 1 | |
| 67353 | SLOGGING RING WRENCH 130 MM DIN-7444 PHOSPHATED (12 EDGES) | 1 | |
| 67430 | SLOGGING OPEN WRENCH 130 MM DIN-133 PHOSPHATED | 1 | |
| 67506 | IMPACT SOCKET WRENCH 3.1/2" - 130 MM (6 EDGES) | 1 | |
| 67526 | IMPACT SOCKET WRENCH 3.1/2" - 230 MM (6 EDGES) | 1 | |
| 67774 | SOCKET WRENCH 1/2" - 30 MM LONG SERIE (6 EDGES) | 1 | |
| 67799 | SOCKET WRENCH 1/2" - 30 MM LONG SERIE (12 EDGES) | 1 | |
| 67860 | DOUBLE OFFSET RING WRENCH 27 - 30 MM AEROSPATIAL CHROME PLATING | 1 | |
| 67918 | OPEN END WRENCH 27 - 30 MM AEROSPATIAL CHROME PLATING | 1 | |
| 68246 | OPEN END HEAD 30 MM CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68261 | BOX END HEAD 30 MM - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68274 | OPEN BOX END HEAD 30 MM - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68586 | SET OF 12 OF OPEN-END WRENCH 6-7 /30-32 MMPHOSPHATED DIN-895 | 1 | |
| 68932 | SLOGGING RING WRENCH 30 MM DIN-7444 PHOSPHATED (6 EDGES) | 1 | |
| 68949 | SLOGGING RING WRENCH 130 MM DIN-7444 PHOSPHATED (6 EDGES) | 1 | |
| 69251 | SET 12 OPEN-END WRENCHES 6-7 / 30-32 MM AEROSPATIAL CHROME PLATING | 1 | |
| 69257 | SET 12 DOUBLE OFFSET RING WRENCHES 6 - 7 /30 - 32 MM AEROSPATIAL CHROME PLATING | 1 | |
| 69447 | SET OF 12 OPEN END WRENCHES 6-7 / 30-32 MM AEROSPATIAL CHROME PLATING | 1 | |
| 69795 | SET OF 12 OPEN END WRENCHES 6-7 /30-32 MM AEROSPATIAL CHROME PLATING | 1 | |
| 70165 | OPEN END WRENCH 30 - 32 MM NON SPARKING Cu-Be | 1 | |
| 70194 | COMBINATION WRENCH 30 MM NON SPARKING Cu-Be | 1 | |
| 70238 | DOUBLE OFFSET RING WRENCH 24 - 30 MM NON SPARKING Cu-Be | 1 | |
| 70241 | DOUBLE OFFSET RING WRENCH 27 - 30 MM NON SPARKING Cu-Be | 1 | |
| 70243 | DOUBLE OFFSET RING WRENCH 30 - 32 MM NON SPARKING Cu-Be | 1 | |
| 70244 | DOUBLE OFFSET RING WRENCH 30 - 36 MM NON SPARKING Cu-Be | 1 | |
| 70251 | OFFSET RING STRUCTURAL WRENCH 30 MM NON SPARKING Cu-Be | 1 | |
| 70286 | SLOGGING OPEN WRENCH 30 MM NON SPARKING Cu-Be | 1 | |
| 70302 | SLOGGING RING WRENCH 30 MM NON SPARKING Cu-Be | 1 | |
| 70343 | SOCKET WRENCH 1/2" - 30 MM NON SPARKING Cu-Be (6 EDGES) | 1 | |
| 70347 | SOCKET WRENCH 3/4" - 30 MM NON SPARKING Cu-Be (6 EDGES) | 1 | |
| 70579 | OPEN END WRENCH 30 - 32 MM NON SPARKING Al-Bron | 1 | |
| 70706 | COMBINATION WRENCH 30 MM NON SPARKING Al-Bron | 1 | |
| 70802 | DOUBLE OFFSET RING WRENCH 24 - 30 MM NON SPARKING Al-Bron | 1 | |
| 70805 | DOUBLE OFFSET RING WRENCH 27 - 30 MM NON SPARKING Al-Bron | 1 | |
| 70807 | DOUBLE OFFSET RING WRENCH 30 - 32 MM NON SPARKING Al-Bron | 1 | |
| 70808 | DOUBLE OFFSET RING WRENCH 30 - 36 MM NON SPARKING Al-Bron | 1 | |
| 71019 | SLOGGING OPEN WRENCH 30 MM NON SPARKING Al-Bron | 1 | |
| 71079 | SLOGGING RING WRENCH 130 MM NON SPARKING Cu-Be | 1 | |
| 71085 | SLOGGING RING WRENCH 30 MM NON SPARKING Al-Bron | 1 | |
| 71107 | SLOGGING RING WRENCH 130 MM NON SPARKING Al-Bron | 1 | |
| 71182 | SOCKET WRENCH 1/2" - 30 MM NON SPARKING Al-Bron (6 EDGES) | 1 | |
| 71222 | SOCKET WRENCH 3/4" - 30 MM NON SPARKING Al-Bron (6 EDGES) | 1 | |
| 71378 | "T" SOCKET WRENCH 30 MM NON SPARKING Cu-Be | 1 | |
| 71389 | T-SOCKET WRENCH 30 MM NON SPARKING Al-Bron | 1 | |
| 71446 | BUNG WRENCH 300 MM NON SPARKING Cu-Be | 1 | |
| 71447 | BUNG WRENCH 300 MM NON SPARKING Al-Bron | 1 | |
| 71681 | COMBINATION WRENCH 30 MM TITANIUM | 1 | |
| 71735 | OFFSET RING STRUCTURAL WRENCH 30 MM NON SPARKING Al-Bron | 1 | |
| 71821 | OPEN END WRENCH 27 - 30 MM NON SPARKING Al-Bron | 1 | |
| 71873 | SOCKET WRENCH 1/2" - 30 MM TITANIUM | 1 | |
| 71977 | OPEN-END WRENCH 30 - 32 MM TITANIUM | 1 | |
| 72006 | DOUBLE OFFSET RING WRENCH 27 - 30 MM TITANIUM | 1 | |
| 72007 | DOUBLE OFFSET RING WRENCH 30 - 32 MM TITANIUM | 1 | |
| 721/30 | TORQUE WRENCH 60-300 NM (531-2655 IN. LB.) | 4 | |
| 721/30-QUICK | TORQUE WRENCH 60-300 NM (531-2655 IN. LB.) | 1 | |
| 72318 | IMPACT SOCKET WRENCH 3/4" - 30 MM NON SPARKING Cu-Be (12 EDGES) | 1 | |
| 72319 | IMPACT SOCKET WRENCH 3/4" - 30 MM NON SPARKING Al-Bron (12 EDGES) | 1 | |
| 72344 | IMPACT SOCKET WRENCH 1" - 30 MM NON SPARKING Cu-Be. (6 EDGES) | 1 | |
| 72345 | IMPACT SOCKET WRENCH 1" - 30 MM NON SPARKING Al-Bron (6 EDGES) | 1 | |
| 72891 | COMBINATION WRENCH 30 MM ACETILEX | 1 | |
| 72893 | SLOGGING RING WRENCH 30 MM ACETILEX | 1 | |
| 72901 | SLOGGING OPEN WRENCH 30 MM ACETILEX | 1 | |
| 72922 | OPEN END WRENCH 24 - 30 MM NON SPARKING Al-Bron | 1 | |
| 72923 | OPEN END WRENCH 24 - 30 MM NON SPARKING Cu-Be | 1 | |
| 72926 | OPEN END WRENCH 30 - 36 MM NON SPARKING Al-Bron | 1 | |
| 72927 | OPEN END WRENCH 30 - 36 MM NON SPARKING Cu-Be | 1 | |
| 730/12-QUICK | 730 QUICK T/WRENCH 25-130NM | 1 | |
| 730/2-QUICK | 730/2 QUICK T/WRENCH 4-20NM | 1 | |
| 730/20 | STAHWILLIE MONOSHOP 730 TORQUE WRENCH | 1 | |
| 730/40-QUICK | 730 QUICK T/WRENCH 80-400NM | 1 | |
| 73006 | OPEN END WRENCH 30 - 34 MM NON SPARKING Al-Bron | 1 | |
| 73007 | OPEN END WRENCH 30 - 34 MM NON SPARKING Cu-Be | 1 | |
| 73082 | SINGLE ENDED OPEN JAW WRENCH 30 MM 1000 V | 1 | |
| 730A/2-1 QUICK | 730 QUICK T/WRENCH 17.5-87.5IN | 1 | |
| 730N/10 | TORQUE WRENCH SERVICE MANOSKOP® WITH RECEPTACLE FOR INSERT TOOLS NO. 730N/10 20-100 NM 15-75 FT.LB 50181010 | 1 | |
| 730N/12 | TORQUE WRENCH 25-130 NM (220-1150 IN. LB.) | 1 | |
| 730N/40 | TORQUE WRENCH CLICK-TYPE 60-300 ft.lb / 80-400 Nm | 2 | |
| 730N/40-FIX | 730 FIX TORQUE WRENCH 80-400NM | 1 | |
| 730R/5 QUICK | 730R/5 QUICK TORQUE WRENCH | 1 | |
| 73113 | OFFSET RING WRENCH 30 MM 1000 V | 1 | |
| 73317 | ANGLED SOCKET WRENCH 30 MM NON SPARKING Cu-Be | 1 | |
| 73324 | ANGLED SOCKET WRENCH 30 MM NON SPARKING Al-Bron | 1 | |
| 73621 | SAFETY PIN FOR IMPACT SOCKET WRENCHES 3/4" (24 - 30 MM) NON SPARKING Cu-Be | 1 | |
| 73622 | SAFETY PIN FOR IMPACT SOCKET WRENCHES 3/4" 24 - 30 MM NON SPARKING Al-Bron | 1 | |
| 73906 | STRAP WRENCH 300 MM Ø 3" NON SPARKING Cu-Be | 1 | |
| 73907 | STRAP WRENCH 300 MM Ø 3" NON SPARKING Al-Bron | 1 | |
| 73924 | BENT SINGLE OPEN END WRENCH 30 MM NON SPARKING Al-Bron | 1 | |
| 74019 | SINGLE END RING WRENCH 30 MM NON SPARKING Cu-Be | 1 | |
| 74020 | SINGLE END RING WRENCH 30 MM NON SPARKING Al-Bron | 1 | |
| 74074 | CURVED SINGLE END RING WRENCH 30 MM NON SPARKING Cu-Be | 1 | |
| 74075 | CURVED SINGLE END RING WRENCH 30 MM NON SPARKING Al-Bron | 1 | |
| 74115 | OFFSET SINGLE END RING WRENCH 30 MM NON SPARKING Cu-Be | 1 | |
| 74116 | OFFSET SINGLE END RING WRENCH 30 MM NON SPARKING Al-Bron | 1 | |
| 74124 | OFFSET SLOGGING RING WRENCH 30 MM NON SPARKING Cu-Be | 1 | |
| 74125 | OFFSET SLOGGING RING WRENCH 30 MM NON SPARKING Al-Bron | 1 | |
| 74141 | CURVED SLOGGING RING WRENCH 30 MM NON SPARKING Cu-Be | 1 | |
| 74142 | CURVED SLOGGING RING WRENCH 30 MM NON SPARKING Al-Bron | 1 | |
| 74208 | "T" HEXAGONAL WRENCH 30 MM NON SPARKING Cu-Be | 1 | |
| 74209 | "T" HEXAGONAL WRENCH 30 MM NON SPARKING Al-Bron | 1 | |
| 74279 | SET OF 18 PCS. - SOCKET WRENCHES 1" (30 - 80 MM) NON SPARKING Cu-Be (12 EDGES) | 1 | |
| 74280 | SET OF 18 PCS. - SOCKET WRENCHES 1" (30 - 80 MM) NON SPARKING Al-Bron (12 EDGES) | 1 | |
| 74472 | SOCKET WRENCH 1/2" - 30 MM NON SPARKING Cu-Be (12 EDGES) | 1 | |
| 74499 | SOCKET WRENCH 1/2" - 30 MM NON SPARKING Al-Bron (12 EDGES) | 1 | |
| 74541 | SOCKET WRENCH 3/4" - 30 MM NON SPARKING Cu-Be (12 EDGES) | 1 | |
| 74550 | SOCKET WRENCH 3/4" - 30 MM NON SPARKING Al-Bron (12 EDGES) | 1 | |
| 74721 | IMPACT SOCKET WRENCH 1/2" - 30 MM NON SPARKING Cu-Be (6 EDGES) | 1 | |
| 74722 | IMPACT SOCKET WRENCH 1/2" - 30 MM NON SPARKING Al-Bron (6 EDGES) | 1 | |
| 74884 | TORQUE WRENCH 1" 300- 900 Nm NON SPARKING Al-Bron | 1 | |
| 75199 | SOCKET WRENCH 1/2" - 30 MM LONG SERIE 1000 V (12 EDGES) | 1 | |
| 75209 | SOCKET WRENCH 1/2" - 30 MM LONG SERIE 1000 V (6 EDGES) | 1 | |
| 75238 | HEXAGONAL KEY WRENCH 30 MM NON SPARKING Cu-Be | 1 | |
| 75239 | HEXAGONAL KEY WRENCH 30 MM NON SPARKING Al-Bron | 1 | |
| 75250 | OPEN END WRENCH 27 - 30 MM NON SPARKING Cu-Be | 1 | |
| 75251 | OPEN END WRENCH 28 - 30 MM NON SPARKING Cu-Be | 1 | |
| 75252 | OPEN END WRENCH 28 - 30 MM NON SPARKING Al-Bron | 1 | |
| 75253 | OPEN END WRENCH 30 - 31 MM NON SPARKING Cu-Be | 1 | |
| 75254 | OPEN END WRENCH 30 - 31 MM NON SPARKING Al-Bron | 1 | |
| 75460 | OFFSET OPEN END STRUCTURAL WRENCH 30 MM NON SPARKING Cu-Be | 1 | |
| 75461 | OFFSET OPEN END STRUCTURAL WRENCH 30 MM NON SPARKING Al-Bron | 1 | |
| 75786 | SOCKET WRENCH 1" - 30 MM NON SPARKING Cu-Be (6 EDGES) | 1 | |
| 75787 | SOCKET WRENCH 1" - 30 MM NON SPARKING Al-Bron (6 EDGES) | 1 | |
| 75842 | SOCKET WRENCH 1" - 30 MM NON SPARKING Cu-Be (12 EDGES) | 1 | |
| 75843 | SOCKET WRENCH 1" - 30 MM NON SPARKING Al-Bron (12 EDGES) | 1 | |
| 75888 | IMPACT SOCKET WRENCH 3/4" - 30 MM NON SPARKING Cu-Be (6 EDGES) | 1 | |
| 75889 | IMPACT SOCKET WRENCH 3/4" - 30 MM NON SPARKING Al-Bron (6 EDGES) | 1 | |
| 75914 | IMPACT SOCKET WRENCH 1" - 30 MM NON SPARKING Cu-Be (12 EDGES) | 1 | |
| 75915 | IMPACT SOCKET WRENCH 1" - 30 MM NON SPARKING Al-Bron (12 EDGES) | 1 | |
| 76142 | TORX KEY WRENCH T-30 NON SPARKING Cu-Be | 1 | |
| 76143 | TORX KEY WRENCH T-30 NON SPARKING Al-Bron . | 1 | |
| 76406 | SET OF 12 OPEN END WRENCHES 6-7 / 30-32 MM NON SPARKING Cu-Be | 1 | |
| 76407 | SET OF 12 OPENEND WRENCHES 6-7 /30-32 MM NON SPARKING AL-Bron | 1 | |
| 76408 | SET OF 12 OPEN END WRENCHES 6-7 / 30-32 MM NON SPARKING Cu-Be | 1 | |
| 76409 | SET OF 12 OPEN-END WRENCHES 6-7 /30-32 MM NON SPARKING Al-Bron | 1 | |
| 76450 | SET OF 12 DOUBLE OFFSET RING WRENCHES 6-7 MM /30-32 MM NON SPARKING Cu-Be | 1 | |
| 76451 | SET OF 12 DOUBLE OFFSET RING WRENCHES 6-7 MM /30-32 MM NON SPARKING Al-Bron | 1 | |
| 76770 | IMPACT SOCKET WRENCH 1/2" - 30 MM LONG SERIE NON SPARKING Cu-Be (6 EDGES) | 1 | |
| 76771 | IMPACT SOCKET WRENCH 1/2" - 30 MM LONG SERIE NON SPARKING Al-Bron (6 EDGES) | 1 | |
| 76891 | DOUBLE OFFSET RING WRENCH 30 - 34 MM NON SPARKING Cu-Be | 1 | |
| 76892 | DOUBLE OFFSET RING WRENCH 30 - 34 MM NON SPARKING Al-Bron | 1 | |
| 77314 | SLOGGING OPEN WRENCH 130 MM NON SPARKING Cu-Be | 1 | |
| 77315 | SLOGGING OPEN WRENCH 130 MM NON SPARKING Al-Bron | 1 | |
| 77594 | FLARE NUT WRENCH 24 - 30 MM NON SPARKING Cu-Be | 1 | |
| 77595 | FLARE NUT WRENCH 24 - 30 MM NON SPARKING Al-Bron | 1 | |
| 77598 | FLARE NUT WRENCH 27 - 30 MM NON SPARKING Cu-Be | 1 | |
| 77599 | FLARE NUT WRENCH 27 - 30 MM NON SPARKING Al-Bron | 1 | |
| 77600 | FLARE NUT WRENCH 30 - 32 MM NON SPARKING Cu-Be | 1 | |
| 77601 | FLARE NUT WRENCH 30 - 32 MM NON SPARKING Al-Bron | 1 | |
| 77602 | FLARE NUT WRENCH 30 - 34 MM NON SPARKING Cu-Be | 1 | |
| 77603 | FLARE NUT WRENCH 30 - 34 MM NON SPARKING Al-Bron | 1 | |
| 77604 | FLARE NUT WRENCH 30 - 36 MM NON SPARKING Cu-Be | 1 | |
| 77605 | FLARE NUT WRENCH 30 - 36 MM NON SPARKING Al-Bron | 1 | |
| 77676 | "T" SOCKET WRENCH 30 MM WITHOUT BAR NON SPARKING Cu-Be | 1 | |
| 77677 | "T" SOCKET WRENCH 30 MM FOR BAR NON SPARKING Al-Bron | 1 | |
| 77746 | BAR FOR "T" SOCKET WRENCH Ø 8 mm - 130 mm NON SPARKING Cu-Be | 1 | |
| 77747 | BAR FOR "T" SOCKET WRENCH Ø 8mm - 130 mm NON SPARKING Al-Bron | 1 | |
| 77764 | BAR FOR "T" SOCKET WRENCH Ø 20 mm - 300 mm NON SPARKING Cu-Be | 1 | |
| 77765 | BAR FOR "T" SOCKET WRENCH Ø 20 mm - 300 mm NON SPARKING Al-Bron | 1 | |
| 77950 | IMPACT SOCKET WRENCH 1/2" - 30 MM NON SPARKING Cu-Be (12 EDGES) | 1 | |
| 77951 | IMPACT SOCKET WRENCH 1/2" - 30 MM NON SPARKING Al-Bron (12 EDGES) | 1 | |
| 78423 | IMPACT SOCKET WRENCH 1/2" - 30 MM LONG SERIE NON SPARKING Cu-Be (12 EDGES) | 1 | |
| 78424 | IMPACT SOCKET WRENCH 1/2" - 30 MM LONG SERIE NON SPARKING Al-Bron (12 EDGES) | 1 | |
| 78475 | IMPACT SOCKET WRENCH 3/4" - 30 MM LONG SERIE NON SPARKING Cu-Be (6 EDGES) | 1 | |
| 78476 | IMPACT SOCKET WRENCH 3/4" - 30 MM LONG SERIE NON SPARKING Al-Bron (6 EDGES) | 1 | |
| 78539 | IMPACT SOCKET WRENCH 3/4" - 30 MM LONG SERIE NON SPARKING Cu-Be (12 EDGES) | 1 | |
| 78540 | IMPACT SOCKET WRENCH 3/4" - 30 MM LONG SERIE NON SPARKING Al-Bron (12 EDGES) | 1 | |
| 78609 | IMPACT SOCKET WRENCH 1" - 30 MM LONG SERIE NON SPARKING Cu-Be (6 EDGES) | 1 | |
| 78610 | IMPACT SOCKET WRENCH 1" - 30 MM LONG SERIE NON SPARKING Al-Bron (6 EDGES) | 1 | |
| 78681 | IMPACT SOCKET WRENCH 1" - 30 MM LONG SERIE NON SPARKING Cu-Be (12 EDGES) | 1 | |
| 78682 | IMPACT SOCKET WRENCH 1" - 30 MM LONG SERIE NON SPARKING Al-Bron (12 EDGES) | 1 | |
| 79328 | OFFSET RING WRENCH 30 MM NON SPARKING Cu-Be (1000 V) | 1 | |
| 79355 | OFFSET RING WRENCH 30 MM NON SPARKING Al-Bron (1000 V) | 1 | |
| 83080 | GEAR WRENCH AVIATION TOOLS KIT 83080 | 1 | |
| 247875 | DIAL TORQUE WRENCH 0-300 LBFT | 1 | |
| 370000 | TORQUE WRENCH 30-200 INLBS | 1 | |
| 625319 | TORQUE WRENCH(30 TO 200 İN LB) | 1 | |
| 1703151 | FLEXIBLE BEAM TORQUE WRENCH 3,4 TO 15,8 NM . (30 TO 140 LBIN.) | 1 | |
| 23054806 | WRENCH AND HOLDER, FAN SHAFT BEARING RETAINING NUT (USE WITH HOLDER 23054808). | 3 | |
| 42050030 | 4205.30-30MM STRIKING FACE RING WRENCH | 1 | |
| 43150002 | *OBSOLETE *OBSOLETE see 43153002* 10760.CV.2-2MM HEX KEY WRENCH NICKELPLATE | 1 | |
| 43150003 | *OBSOLETE *OBSOLETE see 43153003* - 10760.CV.3-3MM HEX KEY WRENCH NICKELPLATE | 1 | |
| 43150004 | *OBSOLETE *OBSOLETE see 43153004* 10760.CV.4-4MM HEX KEY WRENCH NICKELPLATE | 1 | |
| 43150005 | *OBSOLETE *OBSOLETE see 43153005* 10760.CV.5-5MM HEX KEY WRENCH NICKELPLATE | 1 | |
| 43150007 | *OBSOLETE *OBSOLETE see 43153007* 10760.CV.7-7MM HEX KEY WRENCH NICKELPLATE | 1 | |
| 43150008 | *OBSOLETE see 43153008* 10760.CV.8-8MM HEX KEY WRENCH NICKELPLATE | 1 | |
| 43150010 | *OBSOLETE see 43153010* 10760.CV.10-10MM HEXKEY WRENCH NICKELPLATE | 1 | |
| 43150012 | *OBSOLETE see 43153012* 10760.CV.12-12MM HEXKEY WRENCH NICKELPLATE | 1 | |
| 43150014 | *OBSOLETE see 43153014*10760.CV.14-14MM HEXKEY WRENCH NICKELPLATE | 1 | |
| 43150017 | *OBSOLETE see 43153017*10760.CV.17-17MM HEXKEY WRENCH NICKELPLATE | 1 | |
| 50010030 | 755/30-No30 MANSKOP TORQUE WRENCH 60-300Nm No setting scale, have to be set with testers | 1 | |
| 50180020 | TORQUE WRENCH CLICK-TYPE 30-145 ft.lb / 40-200 Nm | 1 | |
| 50180040 | TORQUE WRENCH CLICK-TYPE 60-300 ft.lb / 80-400 Nm | 1 | |
| 50181002 | STAHLWILLE 730N/2 20-180IN.LB TORQUE WRENCH | 1 | |
| 50181010 | TORQUE WRENCH SERVICE MANOSKOP® WITH RECEPTACLE FOR INSERT TOOLS NO. 730N/10 20-100 NM 15-75 FT.LB 50181010 | 1 | |
| 50181020 | STAHLWILLE 730N/20 30-150FT.LB TORQUE WRENCH | 1 | |
| 50181040 | TORQUE WRENCH CLICK-TYPE 60-300 ft.lb / 80-400 Nm | 1 | |
| 50181102 | STAHLWILLE 730N/2 20-180IN.LB TORQUE WRENCH | 1 | |
| 50181365 | 730NII/65-TORQUE WRENCH 130-650Nm | 2 | |
| 50184002 | 730/2-QUICK-730/2 QUICK T/WRENCH 4-20Nm | 1 | |
| 50184004 | 730/4-QUICK-730/4 QUICK T/WRENCH 8-40Nm | 1 | |
| 50184005 | 730/5-QUICK-730 QUICK T/WRENCH 6-50Nm | 1 | |
| 50184010 | 730/10-QUICK-730 QUICK T/WRENCH 20-100Nm | 1 | |
| 50184012 | 730/12-QUICK-730 QUICK T/WRENCH 25-130Nm | 1 | |
| 50184020 | 730/20-QUICK-730 QUICK T/WRENCH 40-200Nm | 1 | |
| 50184030 | 730/30-QUICK-730 QUICK T/WRENCH 60-300Nm | 1 | |
| 50184040 | 730/40-QUICK-730 QUICK T/WRENCH 80-400Nm | 1 | |
| 50184065 | 730/65-QUICK-730 QUICK T/WRENCH 130-650Nm | 1 | |
| 50184565 | 730II/65-QUICK-730 QUICK T/WRENCH 130-650Nm | 1 | |
| 50204015 | 721/15-QUICK-1/2" QUICK T/WRENCH 30-150NM | 1 | |
| 50204030 | 721/30-QUICK-1/2" QUICK T/WRENCH 60-300NM | 1 | |
| 50580001 | TORQUE WRENCH BASIC 730N/2 SERVICE-MANOSKOP, 17.5-87.5 IN.LB | 1 | |
| 50580002 | TORQUE WRENCH CLICK-TYPE 30-175 in.lb | 1 | |
| 50581005 | 730NA/5-TORQUE WRENCH 90-450in.LB | 1 | |
| 50581010 | TORQUE WRENCH 730Na/10 ( 180-900 in.lb) | 2 | |
| 50581020 | 730NA/20-TORQUE WRENCH 350-1800in.LB | 1 | |
| 50581102 | 730NA/2-NEW-TORQUE WRENCH 40-180in.LB | 1 | |
| 50584001 | 730A/2-1 QUICK-730 QUICK T/WRENCH 17.5-87.5IN | 1 | |
| 50584002 | 730A/2 QUICK-730 QUICK T/WRENCH 30-175INLB | 1 | |
| 50584004 | 730A/4 QUICK-730 QUICK T/WRENCH 70-350INLB | 1 | |
| 65590300 | 65590300-STILLSON PIPE WRENCH 12" | 1 | |
| 65642300 | 65642300-SELF GRIP WRENCH | 1 | |
| 7ME65-73761-1 | MECH. EQUIPMENT - SPANNER WRENCH, FWD TRUNNION BRG (MLG) - 737-100/200/300/400/500 | 18 | |
| 8073RUS | BAHCO (SNAP-ON® Industrial) Slim Head Adjustable Wrench - 12" ***SAVE 30%*** | 1 | |
| 81370002 | 7301-PLASTIC CASE FOR TORQUE WRENCH | 1 | |
| 81370003 | 7302-PLASTIC CASE FOR TORQUE WRENCH | 1 | |
| 853-115-030-0 | WRENCH, IGNITER LEAD 30 MM | 1 | |
| 85555A115 | TORQUE WRENCH 30-15 IN/LB | 1 | |
| 85555A412 | TORQUE WRENCH 30-250 IN-LBS | 1 | |
| 85555A413 | TORQUE WRENCH 30-250 IN-LBS | 1 | |
| 8BC345 | BOTTLE - NITROGEN CART - SERVICING, STRUT OIL INFLATOR - STRUT, LANDING GEAR GAUGE - PRESSURE, 0-3000 PSIG (0-20685 KPA) WRENCH - TORQUE BUCKET - 2.5 GALLON CAPACITY | 1 | |
| 96501054 | 730R/2-1 - QUICK TORQUE WRENCH 2-10Nm | 1 | |
| 96501965 | 730DII/65-TORQUE WRENCH 65-650Nm 22X28MM | 1 | |
| 96502065 | 730DRII/65-65-650NM T/WRENCH + 3/4DR | 1 | |
| 96503005 | 730N/5-FIX-730 FIX TORQUE WRENCH 10-50NM | 1 | |
| 96503010 | 730N/10-FIX-730 FIX TORQUE WRENCH 20-100NM | 1 | |
| 96503012 | 730N/12-FIX-730 FIX TORQUE WRENCH 25-130NM | 1 | |
| 96503020 | 730N/20-FIX-730 FIX TORQUE WRENCH 40-200NM | 1 | |
| 96503040 | 730N/40-FIX-730 FIX TORQUE WRENCH 80-400NM | 1 | |
| 96503065 | 730 FIX/65 - TORQUE WRENCH 130-650NM | 1 | |
| 96503080 | 730N/80-FIX-730 FIX TORQUE WRENCH160-800NM | 1 | |
| 96503100 | 730N/100-FIX-730FIX TORQUE WRENCH 200-1000NM (22x28mm apperture) | 1 | |
| 96503465 | 730N/II-65-FIX-730 FIX TORQUE WRENCH130-650NM | 1 | |
| 96504002 | 730R/2 QUICK - TORQUE WRENCH 4-20Nm | 1 | |
| 96504004 | 730R/4 QUICK - TORQUE WRENCH 8-40Nm | 1 | |
| 96504005 | 730R/5 QUICK - TORQUE WRENCH 6-50Nm | 1 | |
| 96504010 | 730R/10 QUICK - TORQUE WRENCH 20-100Nm | 1 | |
| 96504012 | 730R/12 QUICK - TORQUE WRENCH 25-130Nm | 1 | |
| 96504020 | 730R/20 QUICK - TORQUE WRENCH 40-200Nm | 1 | |
| 96504030 | 730R/30 QUICK - TORQUE WRENCH 60-300Nm | 1 | |
| 96504040 | 730R/40 QUICK - TORQUE WRENCH 80-400Nm | 1 | |
| 96583005 | 730N/A5-FIX-730 FIX TORQUE WRENCH 90-450IN | 1 | |
| 96583010 | 730N/A10-FIX-730 FIX T/ WRENCH180-900 INLB | 1 | |
| 96583020 | 730N/A20-FIX-730 FIX T/WRENCH 350-1800 INLB | 1 | |
| 96583040 | 730N/A40-FIX-730 FIX T/ WRENCH 60-300 FTLB | 1 | |
| 981236429 | 30-200 Ib in TORQUE WRENCH | 1 | |
| 98D54003021000 | 98D54003021000 SPECIAL WRENCH | 7 | |
| 98D56103002000 | 98D56103002000-UNK(WRENCH,REMOVAL-SLIDINGWINDOW) | 20 | |
| 98F27508002000 | WRENCH TRUNION BEARING A330 | 5 | |
| A32035-1 | RETAINING NUT R/I WRENCH_B777-300_[A32035-1] | 17 | |
| A32045-110 | WRENCH - SPANNER, MLG STRUT SEAL GLAND N_B777-300ER I.P_[A32045-110] | 10 | |
| A32045-93 | STEERING NUT R/I WRENCH_B777-300_[A32045-93] | 9 | |
| A32045-94 | WRENCHES - SPANNER (777-200, 777-200ER AND B777-300 AIRPLANES. | 9 | |
| AGE-03381-401 | GSE 302 WRENCH SET-TRQ, FUEL LINE ISLR NUT | 3 | |
| AGE-04550-401 | Phenom 100 / 300 Main Door Eccentrics Wrench Set | 3 | |
| AGE12927 | WRENCH - SPLINED - APS2300 - Pratt & Whitney Aeropower / Pratt & Whitney Canada | 2 | |
| AGE14884 | WRENCH SPANNER FOR EJECTION JACK AY 730820 | 3 | |
| AT670 | WRENCH,IMPACT,PNEUMATIC;SUPER DUTY 3/4" DRIVE (300-850 FT.LB) | 1 | |
| AT760 | WRENCH,IMPACT,PNEUMATIC;SUPER DUTY 3/4" DRIVE (300-850 FT.LB) | 1 | |
| ATECH3FQ300B | 1/2" DRIVE FLEX-HEAD TECHANGLE® QUICK-RELEASE TORQUE WRENCH (15–300 FT-LB) | 1 | |
| ATECH3FR250B | TORQUE WRENCH 150-3000 IN-LB | 1 | |
| ATECH3FR300B | 1/2" DRIVE TECHANGLE ELECTRONIC TORQUE WRENCH (15–300 FT-LB) | 1 | |
| ATECH4RS600 | 3/4" DRIVE TECHANGLE® STEEL ELECTRONIC TORQUE WRENCH (30–600 FT-LB) | 1 | |
| AVT300A | TORQUE WRENCH 4-24 LB/FT / 40-300 LB/IN | 8 | |
| BLPCWM30 | COMBINATION WRENCH MAT 30MM | 1 | |
| BLPCWM30B | COMBINATION WRENCH CHROME 30MM | 1 | |
| C71014-1 | WRENCH - AFT CONEBOLT NUT, CFM56-3 ENGINE 737-300, -500 | 18 | |
| C71019-7 | WRENCH - AFT CONE BOLT NUT - CFM56-3 ENGINE 737-300, -500 | 14 | |
| CCM150I | WRENCH,TORQUE;?M;30.0 INCH-POUNDS MIN AND 150.0 INCH-POUNDS MAX;AUDIBLE AND FEEL IMPULSE;SINGLE END EXTERNAL DOVETAIL; STEEL;?M END DRIVE,W/SQUARE LOCATION FOR ADAPTER,TORQUE WRENCH;|9.000";2.00 INCH-POUNDS;PLAIN HEAD;RUBBER GRIP HANDLE; CH | 1 | |
| CEMENTEX 30150UTW38I | TORQUE WRENCH, 3/8" DR 30-150IN-LBS | 1 | |
| CMM150:26848 | WRENCH,TORQUE:30-150 IN-LB | 1 | |
| DB300I-3A | TORQUE WRENCH DIAL INDICATOR 0-300 in.lb | 1 | |
| DB300I-3AS | TORQUE WRENCH DIAL INDICATOR 0-300 in.lb | 1 | |
| DIW-120 | WRENCH TORQUE TILL 3000 INCH -LB | 1 | |
| E.306-30D | ELECTRONIC TORQUE WRENCH (1,5 TO 30 | 3 | |
| EVT3000 | TORQUE WRENCH ( VALUE 2000 -3000 IN /LBS | 1 | |
| F70200-14 | BOTTLE - NITROGEN CART - SERVICING, STRUT OIL INFLATOR - STRUT, LANDING GEAR GAUGE - PRESSURE, 0-3000 PSIG (0-20685 KPA) WRENCH - TORQ BUCKET - 2.5 GALLON CAPACITYUE | 19 | |
| F70200-35 | BOTTLE - NITROGEN CART - SERVICING, STRUT OIL INFLATOR - STRUT, LANDING GEAR GAUGE - PRESSURE, 0-3000 PSIG (0-20685 KPA) WRENCH - TORQUE BUCKET - 2.5 GALLON CAPACITY | 16 | |
| GAJS30 | WRENCH, ADJUSTABLE, SIDE WHEEL, INDUSTRIAL FINISH, 30" | 2 | |
| GAJS30A | 30 INCH ADJUSTABLE WRENCH | 2 | |
| GGG-W-00686 TY3CL1 | TORQUE WRENCH,1/4'30-150IN/LB | 1 | |
| GOEXM300B | COMBINATION WRENCH 30MM | 1 | |
| GQT2R200NP | TORQUE WRENCH,ADJ CLICK,40-300IN.LB | 3 | |
| GS18301-1 | TORQUE WRENCH - 175 FT-LB/230 NM - 1/2 DRIVE TOOL - RENOMMÉ A44076 | 9 | |
| GSE5100726 | TORQUE WRENCH, 100 - 600 INCH-POUNDS (11.30 - 67.80 NM) | 1 | |
| GSE5101082 | TORQUE WRENCH, 0 - 300 INCH-POUNDS (0 - 33.89 NM) | 1 | |
| GSE5105082 | TORQUE WRENCH 0-300 INCH-POUNDS | 1 | |
| Gedore-010240 | Gedore 010240 ADS40F - Dial Measuring Torque Wrench, Range : 8-40 N.m / 6-30 lbf.ft | 1 | |
| Gedore-010248 | Gedore 010248 ADS40FS - Dial Measuring Torque Wrench, Range : 8-40 N.m / 6-30 lbf.ft | 1 | |
| Gedore-010300 | Gedore 010300 BDS80A - Dial Measuring Torque Wrench, Range : 16-80 N.m / 12-60 lbf.ft | 1 | |
| Gedore-010360 | Gedore 010360 BDS200 - Dial Measuring Torque Wrench, Range : 40-200 N.m / 30-160 lbf.ft | 1 | |
| Gedore-010440 | Gedore 010440 BDS200S - Dial Measuring Torque Wrench, Range : 40-200 N.m / 30-160 lbf.ft | 1 | |
| Gedore-010520 | Gedore 010520 CDS400S - Dial Measuring Torque Wrench, Range : 80-400 N.m / 60-300 lbf.ft | 1 | |
| Gedore-010720 | Gedore 010720 EDS2000 - Dial Measuring Torque Wrench, Range : 400-2000 N.m / 300-1500 lbf.ft | 1 | |
| Gedore-011053 | Gedore 011053 TSN125 Sw - Switch operated Signal Torque Wrenches, Range : 40-125 N.m / 30-90 lbf.ft | 1 | |
| Gedore-011301 | Gedore 011301 TSN5/45 - Preset Torque Wrenches, Range : 1-5 N.m / 10-45 lbf.in | 1 | |
| Gedore-012030 | Gedore 012030 8mm TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012230 | Gedore 012230 7/8 TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012300 | Gedore 012300 12mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012305 | Gedore 012305 13mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012330 | Gedore 012330 18mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012430 | Gedore 012430 7/16 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012530 | Gedore 012530 13mm TB FLARED END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012630 | Gedore 012630 5/8 TB FLARED END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012730 | Gedore 012730 HEX SETTING ADAPTOR, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-026300 | Gedore 026300 21 mm OPEN END 8791-21, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026440 | Gedore 026440 30 mm OPEN END 8791-30, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027300 | Gedore 027300 11 mm RING END 8792-11, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-028300 | Gedore 028300 14 mm FLARED END 8797-14, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-049030 | Gedore 049030 8mm O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049230 | Gedore 049230 7/8 O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049300 | Gedore 049300 12mm R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049305 | Gedore 049305 13mm R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049330 | Gedore 049330 18mm R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049430 | Gedore 049430 7/16 R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049530 | Gedore 049530 13mm F/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049630 | Gedore 049630 5/8 F/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-050303 | Gedore 050303 TBN200E SW - Switch operated Signal Torque Wrenches, Range : 40-200 N.m / 29-147 lbf.ft | 1 | |
| Gedore-3022854 | Gedore 3022854 8801-01 150-700Nm IND. WRENCH | 1 | |
| Gedore-3022862 | Gedore 3022862 8801-02 200-800Nm IND. WRENCH | 1 | |
| Gedore-3022870 | Gedore 3022870 8801-03 300-1000Nm IND. WRENCH | 1 | |
| Gedore-7672630 | Gedore 7672630 9x12 RECTANGULAR 1/4 FIXED HEAD SQUARE, Torque Wrench End Fittings | 1 | |
| Gedore-7687230 | Gedore 7687230 9x12 RECTANGULAR 1/2 REVERSIBLE RATCHET HEAD, Torque Wrench End Fittings | 1 | |
| Gedore-7688630 | Gedore 7688630 9x12 RECTANGULAR OPEN END FITTING A/F 10, Torque Wrench End Fittings | 1 | |
| Gedore-7691930 | Gedore 7691930 9x12 RECTANGULAR RING END FITTING A/F 13, Torque Wrench End Fittings | 1 | |
| Gedore-7692230 | Gedore 7692230 9x12 RECTANGULAR RING END FITTING A/F 14, Torque Wrench End Fittings | 1 | |
| Gedore-7693040 | Gedore 7693040 9x12RECTANGULAR RING END FITTING A/F 22, Torque Wrench End Fittings | 1 | |
| IAE1J12011 | WRENCH, COUPLING NUTLHT Dwg No.(537230003) | 1 | |
| IAE1J12012 | WRENCH, COUPLING NUTLHT Dwg No.(537230004) | 1 | |
| IAE1J12013 | WRENCH, COUPLING NUTLHT Dwg No.(537230005) | 1 | |
| IAE1R18230 | WRENCH, INSTALL/REMOVE LHT Dwg No.(537230025) | 1 | |
| IZO-D30 | ELECTRONIC TORQUE WRENCH WITH RECTANGULAR INTERCHANGEABLE HEAD 3-30 NM | 1 | |
| J-306U | 306U SERIES DUAL GRADUATION CLICK TORQUE WRENCH + REMOVABLE RATCHET + CASE - 20-100NM - 9X12 - 3/8 | 1 | |
| J27110 | WRENCH - NUT, WING TE FLAP SUPPORT SPL-15305 | 1 | |
| J27110-1 | WRENCH - NUT, WING TE FLAP SUPPORT SPL-15305 | 1 | |
| J306-50D | 306D SERIES CLICK TORQUE WRENCH - 10-50NM - 9X12 | 3 | |
| J32042-89 | WRENCH KIT - LANDING GEAR (ALL 777 AIRPLANES EXCEPT 777-200LR AND 777-300ER.) | 18 | |
| J32085-76 | KIT - WRENCH, LANDING GEAR; 777-300ER | 10 | |
| J32085-87 | WRENCH KIT, MLG AND NLG FOR B777-300ER | 5 | |
| J6018AB | TORQUE WRENCH 60-300 FT IBS (STANLEY PROTO 6018AB) | 3 | |
| J6068C | TORQUE WRENCH 300-1800 IN-LBS | 4 | |
| J6072C | 600-3000 IN LBS TORQUE WRENCH | 4 | |
| J6072CX | 600-3000 IN LBS TORQUE WRENCH | 2 | |
| J6177NMF | Torque wrenches ( 0-30NM/0-250 in lbf) | 3 | |
| JHW11630 | HI POL WRENCH 12 PT 30MM | 1 | |
| JHW1230MNRC | 30MM COMB RATCHETING WRENCH | 1 | |
| JHWRBM-30 | SINGLE RAT BOX WRENCH 30MM | 1 | |
| JHWSFH1808BW | STRIKING WRENCH 1-3/16 / 30MM | 1 | |
| K-4013 | KIT, 30 DEG THIN-HEAD WRENCH | 2 | |
| KDS85050 | TORQUE WRENCH WDR30-200 IN/LBS | 1 | |
| KDS85060 | TORQUE WRENCH 1/4" 30-200 IN/LBS | 1 | |
| KEN5751120K | 300mm SPARK RESISTANT ADJUSTABLE WRENCH | 1 | |
| MANOSKOP71A/40 | Torque Wrench 60 ft.lb - 300 ft.lb (increments 5 ft.lb) | 1 | |
| MD300I/35 | WRENCH TORQUE 60-300 INLB | 1 | |
| MM-TW70330 | TORQUE WRENCH 1/2" SQ/DRIVE 70- 330NM | 1 | |
| MTN1272S | MARTIN 30DEG ANGL WRENCH | 1 | |
| NO AVAILABLE | TORQUE WRENCH 0-300 INCH POUND | 1 | |
| PD-602 | WRENCH MECHANICAL USE WITH ADAPTER (23068496). | 1 | |
| PWA18872 | HYDRAULIC WRENCH (REFER TO TABLE 301) | 1 | |
| PWA25000 | HYDRAULIC WRENCH (REFER TO TABLE 301) | 1 | |
| PWA26309 | GUIDE - HPC, TIEROD NUT WRENCH_[PWA26309] | 2 | |
| PWA28966 | WRENCH - REM/INST OF BSI PLUG_392X30X30MM/1.35KG_[PWA28966] | 2 | |
| PWA33732 | HYD WRENCH - LPT COUPLING NUT_TO LOOSEN OR TIGHTEN VARIOUS BRG RETAINI_368 X 330 X 254 MM/ 57.7 KG_[PWA33732] | 3 | |
| PWA45418 | WRENCH, MECHANICAL (REFER TO TABLE 301) | 1 | |
| PWA80187 | WRENCH, MECHANICAL (REFER TO TABLE 301) | 4 | |
| QD1R-200 | TORQUE WRENCH (30-500 IN-LBS) | 18 | |
| QD1R200 | WRENCH 30-400 IN-LB | 18 | |
| QD2R200 | TORQUE WRENCH,ADJ CLICK,40-300IN.LB | 16 | |
| QD3150 | Torque Wrench, 30-150 ft lb, 1/2" drive | 1 | |
| QD3150A | TORQUE WRENCH, 30-150 FT LB, 1/2" DRIVE | 1 | |
| QD3R150 | TORQUE WRENCH MICROMETER ADJUSTABLE (30.00 FT-LB-150.00 FT-LB) | 7 | |
| QD3R150A | TORQUE WRENCH MICROMETER ADJUSTABLE (30.00 FT-LB-150.00 FT-LB) | 2 | |
| QD3R1600 | 300-1600 IN.LB TORQUE WRENCH TOOL | 4 | |
| QD3R2500 | TORQUE WRENCH 1/2 “ DR 300 TO 2500 LB/IN | 8 | |
| QD3R250A | TORQUE WRENCH 50-250 FT. LB 1/2 DRIVE (600-3000 IN. LB) | 7 | |
| QD4R600A | TORQUE WRENCH 100-600FTLBS (AIRBUS 330) | 3 | |
| QJ217D | TORQUE WRENCH : 30- 200 IN LBS_APPLY FOR TORQUE TO BOLT/NUTS_30 ~ 200 IN.LBS_[QJ217D] | 1 | |
| R-306U | 306U SERIES DUAL GRADUATION CLICK TORQUE WRENCH + REMOVABLE RATCHET + CASE - 5-25NM - 9X12 - 1/4 | 2 | |
| RSE1202 | WRENCH-SPANNER A330 ENGINE | 11 | |
| S-306U | 306U SERIES DUAL GRADUATION CLICK TORQUE WRENCH + REMOVABLE RATCHET + CASE - 40-200NM - 14X18 - 1/2 | 2 | |
| S306-100D | 306D SERIES CLICK TORQUE WRENCH - 20-100NM - 9X12 | 1 | |
| SCA-730-STQK | 730N SERIES TORQUE WRENCH KIT | 1 | |
| SH001 | BOTTLE - NITROGEN CART - SERVICING, STRUT OIL INFLATOR - STRUT, LANDING GEAR GAUGE - PRESSURE, 0-3000 PSIG (0-20685 KPA) WRENCH - TORQUE BUCKET - 2.5 GALLON CAPACITY | 3 | |
| ST2580-202 | WRENCH - SOCKET, MAIN GEAR TRUNNION LINK - 737-100/200/300/400/500 | 16 | |
| TA00617 | SPANNER WRENCH (ITEM530) | 1 | |
| TE12AC | TORQUE WRENCH; 30-50 POUND-INCHES | 1 | |
| TE25A | TORQUE WRENCH DIAL 0-300 LB-IN X 3/8 | 3 | |
| TE25FUA | TORQUE WRENCH(0-300 IN/LBS, 3/8SQ) | 3 | |
| TE25FUE | TORQUE WRENCH(0-300 IN/LBS, 3/8SQ) | 2 | |
| TE3A | Torque Wrench 0 in.lb - 30 in.lb (increments 1/2 in.lb) | 4 | |
| TE3FUA | TORQUE WRENCH-DIAL 30 IN-LB | 7 | |
| TE3FUAC | TORQUE-WRENCH - 30 IN.LB - 1/4'' DRIVE | 1 | |
| TE3FUE | TORQUE WRENCH(0 TO 30 IN.LB, 1/4 DIAL) | 1 | |
| TER175 | TORQUE WRENCH - 175 ft-lb/230 Nm - 1/2 DRIVE TOOL - Renommé A44076 | 8 | |
| TER25A | TORQUE WRENCH DIAL X 3/8 300 LB/INCH | 1 | |
| TF3F | TORQUE WRENCH 6-30 INCH LB | 1 | |
| TORQUE WRENCH 3 | CLICK-TYPE, WRENCH - TORQUE 3.4 - 16.9 N.M (30 - 1 | 1 | |
| TQFR50B | TORQUE WRENCH, 100 - 600 INCH-POUNDS (11.30 - 67.79 NM) TQFR50B 1 2 TORQUE WRENCH | 1 | |
| TW2 | TORQUE WRENCH 40-300 INCH LBS | 1 | |
| TWD 300 | ELECTRONIC TORQUE WRENCH (300 NM (2655.3 LBF IN)) MAX. | 1 | |
| VOM2730B | WRENCH OPEN END STANDARD METRIC 27X30MM | 1 | |
| VOM3032B | WRENCH OPEN END STANDARD METRIC 30X32MMMM | 2 | |
| VSM807B | "7 PC METRIC 30°/ 60° FOUR‐WAY ANGLE OPEN‐END WRENCH SET (10‐15 AND 17 MM) | 1 | |
| WAS35285 | WRENCH SPANNER FOR EJECTION JACK AY 730820 | 1 | |
| WAS35286 | WRENCH SPANNER FOR EJECTION JACK AY 730820 | 1 | |
| WAS35287 | WRENCH SPANNER FOR EJECTION JACK AY 730820 | 1 | |
| WAS35810 | WRENCH FOR RAM AIR TURBINE 730816 | 1 | |
| WRENCH-TORQUE0-300LBINS | TORQUE WRENCH 0-300 LB INS | 1 | |
| WRENCH-TORQUE300-1600LBINS | TORQUE WRENCH 300-1600 LB INS | 1 | |
| WRENCH-TORQUE40-300LBINS | TORQUE WRENCH 40-300 LB INS | 1 | |
| WS-3510 | 30-DEGREE SERVICE WRENCH SET, 10 PIECE | 1 | |
| WSDW31 | DRIVE WRENCH (ROLLS ROYCE ID 730794) | 2 | |
| 85555A115 | TORQUE WRENCH 30-15 IN/LB | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
