| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| CG5560HY | HYDRAULIC TA | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 07482ASSY9471M46G01 | PORTABLE HYDRAULIC ACTUATOR (CALIBRATION) | 1 | |
| (CALIB) 856A1084G04 | ACTUATOR PORTABLE HYDRAULIC (CALIBRATION) | 2 | |
| (CALIB) 990188 | TEST STAND HYDRAULIC COMPONENTS (CALIBRATION) | 1 | |
| (CALIB) 99A29001006000 | TOPPING UNIT-TOPPING UP,HYDRAULIC TANK( (CALIBRATION) (CALIBRATION) | 1 | |
| 008007055 | HYDRAULIC TEST STATION | 1 | |
| 02-0544C0110 | HYDRAULIC TAIL JACK | 4 | |
| 02-1256C0111 | Tronair 02-1256C0111 Hydraulic Aft Fuselage Jack (12 ton10.8 metric ton) (without stairs) (CE) | 6 | |
| 02-7812-0110 | HYDRAULIC JACK, TAIL SUPPORT POINT | 2 | |
| 02-7813C0100 | JACK, HYDRAULIC MLG AXLE, 12 TON 2 STAGE | 23 | |
| 02-7838C0110 | HYDRAULIC WING/ TAIL JACK | 4 | |
| 02-7856C0100 | Tronair 02-7856C0100 Blue Hydraulic Tail Jack (5 ton4.5 metric ton) (CE) | 7 | |
| 02-7902C0100 | Tronair 02-7902C0100 Cessna 510 Mustang 12-Ton Hydraulic Axle Jack (CE) | 3 | |
| 02902907 | HYDRAULIC TANK | 1 | |
| 02A7895C0100 | 40 TON TWO STAGE HYDRAULIC AVIATION FLOATING AUTO-RETRACT AXLE JACK | 5 | |
| 02A7896C0100 | 15 TON TWO STAGE HYDRAULIC AVIATION FLOATING AUTO-RETRACT AXLE JACK | 4 | |
| 02A7897C0100 | 15 TON TWO STAGE HYDRAULIC AVIATION FLOATING AUTO-RETRACT AXLE JACK | 4 | |
| 04-6005-1100 | HYDRAULIC STAND | 4 | |
| 040499-100SS | PORTABLE HYDRAULIC POWER | 1 | |
| 05-611-03-1-A-F | HYDRAULIC GROUND POWER UNIT, PORTABLE | 1 | |
| 05-7052-3600 | HYDRAULIC TEST STAND | 1 | |
| 06-11413-1 | BLEEDER TANK; 225DX ECONOMY HYDRAULIC BRAKE P/N 06-11413-1 | 1 | |
| 06-4005-0511 | HYDRAULIC SERVICING UNIT − PORTABLE, LANDING GEAR | 15 | |
| 06-4005-3611 | PORTABLE HYDRAULIC S | 12 | |
| 06-4035-0510 | HYDRAULIC TEST STAND | 1 | |
| 06-4035-0800 | PORTABLE HYDRAULIC. SVC. UNIT | 6 | |
| 06-5004-0500 | HYDRAULIC TEST STAND (HAND PUMP) | 8 | |
| 06-5021-1800 | Fluid Service Unit (CE) - Oil 23699 / Hydraulic 87257 - Connects to 5 Gallon Container | 10 | |
| 06-5024-3610 | HYDRAULIC FLUID TRANSFER PUMP (ATTACHES TO 55 GAL/208 L DRUM) & (100 PSI/6.9 BAR) | 2 | |
| 077-69025 | HYDRAULIC AMPLIFIER STATIC FLOW TEST | 1 | |
| 082215-001 | PORTABLE HYDRAULIC TEST STAND , MODEL: HIP-D-9SS | 1 | |
| 082215-100 | PORTABLE HYDRAULIC POWER SUPPLY DIESEL | 1 | |
| 1006-SA10-22116AB8 | HYDRAULIC TEST STAND | 1 | |
| 101197-100 | TEST STAND HYDRAULIC | 1 | |
| 101198-100 | TEST STAND, AIRCRAFT HYDRAULIC SYSTEM ELECTRIC MOTOR DRIVEN | 1 | |
| 109-3101-69-301 | TOOL,HYDRAULIC CHARGING PORTABLE UNIT | 2 | |
| 1095K41 | HYDRAULIC GREASE FITTING 1/4-28 TAPER THREAD 10,000 MAX PSI | 1 | |
| 10C1113 | FIXTURE REMOVE SPACERSTAGE 1 FAN BLADE HYDRAULIC | 1 | |
| 10C1113G01 | FIXTURE REMOVE-SPACERSTAGE 1 FAN BLADE, HYDRAULIC REMOVE FIXTURE) | 2 | |
| 1135-800 | Stand - Access - Lower Lobe - Hydraulic Operation With Stabilizing Jacks - Height: 3 - 12.5 Feet | 1 | |
| 116-1 | HYDRAULIC TEST STAND | 1 | |
| 116-1D | HYDRAULIC TEST STAND | 1 | |
| 116-1D(ROTODYNE) | HYDRAULIC TEST STAND | 1 | |
| 1179-8000 | STAND - WORK - GENERAL PURPOSE - HYDRAULICALLY ACTUATED - TOWABLE - HEIGHT: 12 - 29 FEET | 2 | |
| 11C3004P02 | FIXTURE, SHIPPING - FAN STATOR CASE MODULE, HYDRAULIC (DELUXE) | 1 | |
| 11C3086G01 | PULLER, HYDRAULIC - STAGE 6-10 SPOOL AND STAGE 5 DISK HPC ROTOR | 1 | |
| 11C3227 | HYDRAULIC PULLER - HPC ROTOR BLISK STAGE 1 | 1 | |
| 11C3227G01 | HYDRAULIC PULLER, HPC ROTOR BLISK STAGE 1 | 1 | |
| 11C4572 | NON-HYDRAULIC FAN STATOR STAND FOR GENX | 1 | |
| 120-1D SN | ROTODYNE HYDRAULIC TEST STAND | 1 | |
| 1256728 | CONTROLL BOX ,HYDRAULIC SYSTEM COMPONENTS TEST STAND | 1 | |
| 13-6603-600 | HYDRAULIC POWER STAND 28VDC. 3000 RPM. | 1 | |
| 13-6603-6000 | Robo-Mule 5000 Ground Hydraulic Power Stand | 4 | |
| 13619 | HYDRAULIC HOSE, NON-METALLIC 10' FOR 13600 | 1 | |
| 13640 | HYDRAULIC INSTALLING TOOL | 2 | |
| 14−6804−6000 | "PORTABLE HYDRAULIC SERVICE UNIT (FOR MIL-H-5606) | 22 | |
| 1985(A) | Hydraulic Test Stand | 1 | |
| 340.9 | LANGA TOWABLE HYDRAULIC MAINTENANCE STAIR | 1 | |
| 2160.2 | LANGA TOWABLE HYDRAULIC MAINTENANCE STAIR | 1 | |
| 2583 | HYDRAULIC INSTALLATION TOOL | 1 | |
| 5241 | HYDRAULIC TEST STAND FLUID 51 | 1 | |
| 27004 | HYDRAULIC TEST STAND (ELECTRIC) | 1 | |
| 41046 | HYDRAULIC PUMP KIT, 18500 WORK STAND | 1 | |
| 272971 | HYDRAULIC LIFT TABLE (WESCO) | 1 | |
| 473015 | REPLACEMENT HOSES TOOL NO. 473015 THIS KIT CONTAINS ALL HYDRAULIC SEALS CAPABLE OF REBUILDING ONE HYDRAULIC JACK OF THE AA293268 CYLINDER HEAD/MAIN BEARING HYDRAULIC FIXTURE. | 1 | |
| 473036 | REPLACEMENT GAUGE TOOL NO. 473036 THIS PUMP CONTAINS A PNEUMATIC FOOT OPERATED HYDRAULIC PUMP, PRESSURE GAUGES, SUPPLY AIR OILER, PRESSURE REGULATOR AND HYDRAULIC HOSES. | 1 | |
| 2001098 | CLIN 0001: B-1 HYDRAULIC MAINTENANCE PLATFORM/STANDS | 2 | |
| 2001102 | B-2 (2698) Maintenance & Crew Access Stairway/Stand. 10' to 19' Platform Height, Air Powered powered hydraulic lift with back-up hand pump. 4'x9' platform, sliding rail on left side of platform allows aircraft door opening, full front bumper. Note: This | 1 | |
| 2001119 | B-4 Maintenance Stand: 37" to 87" Platform height, 3' x 7' platform deck, 750 lb. capacity. Manual hydraulic pump. Locking casters. | 2 | |
| 2001142 | B-5 Maintenance Stand: 88" to 135" platform height, 3' x 7' platform deck, 750 lb. capacity. Manual hydraulic pump. Locking casters. | 1 | |
| 2001395 | Hydraulic helicopter ground handling wheels for Agusta A-119, Bell 206L, 407, Eurocopter AS-350, 355, 365, BK-117, B0-105 EC-130, SA-315, MD Helicopters 500, 520, 530, 600, 900 | 1 | |
| 2001396 | Hydraulic helicopter ground handling wheels for Bell 214ST and other military aircraft.The 002105 are caster wheels for helicopters with fitting on the forward ends of the skid tubes.Specifications: Bell 214ST and other military aircraft Skid tube dia. 4. | 1 | |
| 2003642 | B-4 (3060) Maintenance Stand. Foot actuated hydraulic pump, 8 Inch (20cm) heavy-duty swivel casters with brakes and swivel locks, Working height of 36-86 inches (91-218cm), Platform size of 30 x 76 inches (76-193cm), 500 lbs. (227kg) load capacity | 1 | |
| 2004082 | B-5 (3065) Maintenance Stand. Foot actuated hydraulic pump, 8 Inch (20cm) heavy-duty swivel casters with brakes and swivel locks, Working height of 88-138 inches (232-351cm), Platform size of 30 x 76 inches (76-193cm), 500 lbs. (227kg) load capacity | 1 | |
| 2008035 | Model 1986 Maintenance Stand (B1 extended platform): 3'-16' Working Height, 3' to 10' Platform Height, 4' x 11' Deck, Hydraulic hand pump. | 1 | |
| 201198-00 | HYDRAULIC TEST STAND ELECTRIC | 1 | |
| 2012183 | 12-Ton Axle Jack. Dual stage hydraulic and mechanical extension. Manual hand pump operations. All steel construcion and uses 5606 hydraulic fluid. 1" and 2" spacers included. CE Certified. | 1 | |
| 2012184 | 25-Ton Axle Jack. Dual stage hydraulic and mechanical extension. Manual hand pump operations. All steel construcion and uses 5606 hydraulic fluid. 1" and 2" spacers | 1 | |
| 2017837 | NB & WB Adjustable Fuel Stand. Provides a working height range of 112" to 209". Sturdy structural steel construction is powder coated for durability. Full bumpers on platform railings protect underwing of aircraft. High quality hydraulic lift allows easy | 1 | |
| 151000100 | PORTABLE HYDRAULIC ACTUATOR LEAP-1B | 1 | |
| 202527-100 | TEST STAND, HYDRAULIC SKYDROL DIESEL (HII) | 1 | |
| 2078.20.90.00 | HYDRAULIC TORQUE WRENCH - METALICO | 1 | |
| 21C2780G001 | TEST STAND,ELECTRIC AND HYDRAULIC SYSTEM COMPONENTS | 1 | |
| 246-9977-00 | AIRBORNE PORTABLE HYDRAULIC UNIT | 1 | |
| 247A0000-000-001FME2 | HYDRAULIC WORK TABLE | 1 | |
| 25Y189A | WRENCH, RESERVOIR FILLER CAP -HYDRAULIC OR DE-ICING TANK CAPS | 6 | |
| 2C6395G05 | ACTUATOR - HYDRAULIC, PORTABLE, VSV STATOR - CFM56-7/CFM56-3 | 8 | |
| 3174-100-1 | DIGITAL NATO AIR/HYDRAULIC TOOL KITDIGITAL KIT (NITROGEN AND MIL-H-83282-5606) | 1 | |
| 32200.10S3 | PUSH BUTTON START TO SUIT HYCOM HT2000-3-E11-S2-Z HYDRAULIC RIG | 1 | |
| 332V000C | DIGITAL AIR/HYDRAULIC TOOL KIT | 1 | |
| 343A400KN2 | HYDRAULIC LOAD CELLS WITH BORING CONTAINER | 6 | |
| 350A93-3550-01 | TOOL KIT TO REMOVE /INSTALL THE DRIVE BEARING OF THE HYDRAULIC PUMP | 2 | |
| 350V000 | DIGITAL AIR/HYDRAULIC TOOL KIT | 1 | |
| 350V000A | DIGITAL AIR/HYDRAULIC TOOL KIT | 1 | |
| 355A95-7500-00 | AIR HYDRAULIC TOOL KIT / HYDRAULIC ACCESSORY ASSEMBLY AS350 / AS355 STANDARD | 1 | |
| 3G2905G00132 | ADAPTER KIT, HYDRAULIC TEST STAND | 1 | |
| 401CH29E1/935 | TEST SET, HYDRAULIC SIMLUTAOR | 1 | |
| 410DME-10AR | COM-1786 (FLOWMETER - LEAKAGE CHECK, HYDRAULIC SYSTEM INTERNAL 410DME-10AR) AND COM-163 (PORTABLE HYDRAULIC CART, CAPABLE OF 3000 PSI AND A MINIMUM FLOW OF 30 GPM 57301FC3BBCILMNY) | 1 | |
| 4199071 | PUSH BUTTON START TO SUIT HYCOM HT2000-3-E11-S2-Z HYDRAULIC RIG | 1 | |
| 4340K000 | TEST STAND HYDRAULIC | 1 | |
| 4920-15-198-9841 | HYDRAULIC TEST STAND (116-1) | 1 | |
| 4920-15-1989841 | HYDRAULIC TEST STAND, ELECTRIC MOTOR DRIVEN | 1 | |
| 4920-15-989841 | HYDRAULIC TEST STAND | 1 | |
| 50-60-44 | JACK - TRIPOD - WING - 50 TON CAPACITY - 60" MINIMUM HT., 44" HYDRAULIC LIFT, 16" SCREW EXTENSION, 120" TOTAL HT. | 4 | |
| 500V000D | DIGITAL AIR/HYDRAULIC TOOL JIT | 1 | |
| 5011V000D | DIGITAL NATO AIR/HYDRAULIC TOOL KITDIGITAL KIT (NITROGEN AND MIL-H-83282-5606) | 1 | |
| 520H | Hydraulic Swager With Enerpac® (Add to cart: Contact us to order) | 1 | |
| 520HTK | Hydraulic Pull Tester Kit (Add to cart: Contact us to order) | 1 | |
| 52310CM1 | HYDRAULIC TEST STAND | 3 | |
| 52310CM6 | HYDRAULIC TEST STAND | 3 | |
| 5730 SERIES | "HYDRAULIC PORTABLE POWER UNIT 34 GPM, 3500 PSI RETURN FILTER 25. | 1 | |
| 57301FC3BBCILMNY | PORTABLE HYDRAULIC CART, CAPABLE OF 3000 PSI AND A MINIMUM FLOW OF 30 GPM | 1 | |
| 57305KV3BBCI-A1 | PORTABLE HYDRAULIC CART | 1 | |
| 57311FC3BBCILMNY | PORTABLE HYDRAULIC CART, 3000 PSI 30 GPM | 1 | |
| 5830 SERIES | PORTABLE HYDRAULIC CART, SYSTEM TEST, CAPABLE OF 3000 PSI AND AMINIMUM FLOW OF 50 GPM.(COM-1796) | 1 | |
| 58300BJ | PORTABLE HYDRAULIC CART, SYSTEM TEST, CAPABLE OF 3000 PSI AND AMINIMUM FLOW OF 50 GPM.(COM-1796) | 1 | |
| 5833 | HYDRAULIC POWER UNIT, 58 SERIES WITH SOFT-START (CE) (60 HZ COUNTRIES) | 1 | |
| 584723-01 / 584723P0001 | HOSE 1" X 108" - HYDRAULIC START SUP Q/D. (GEEQUIVALENT) | 1 | |
| 5L32 | PORTABLE HYDRAULIC CART | 1 | |
| 5L32 SERIES | PORTABLE HYDRAULIC CART, SYSTEM TEST | 1 | |
| 5L33 SERIES | PORTABLE HYDRAULIC CART, SYSTEM TEST, 5000 PSI | 1 | |
| 65-90305-17 | HYDRAULIC STANDBY SYS. PRESSURE FILTER | 8 | |
| 65-92528-1 | Repair Kit, Hydraulic Tubing (Temp. Repairs Only) (Approved for Titanium) | 4 | |
| 65-92528-11 | REPAIR KIT, HYDRAULIC TUBING (TEMP. REPAIRS ONLY) (APPROVED FOR TITANIUM) | 1 | |
| 65-92528-37 | REPAIR KIT, HYDRAULIC TUBING (TEMP. REPAIRS, OPERATING PRESSURES UP TO AND INCLUDING 3000 PSI) (APPROVED FOR TITANIUM) | 1 | |
| 67345FCBBCLMNY4 | PORTABLE HYDRAULIC CART | 1 | |
| 673A5FCBBCLMNY4 | PORTABLE HYDRAULIC CART, CAPABLE OF 3000 PSI AND A MINIMUM FLOW OF 30 GPM | 1 | |
| 673A5FCBBCLNY4 | PORTABLE HYDRAULIC CART 3000 PSI, 30 GPM | 1 | |
| 69120-2 | 220-230 VAC 50/60 HZ PORTABLE HYDRAULIC CRIMP TOOL | 5 | |
| 703A95-0520-0 | Drain Tool Engine/Oil Tank/ Hydraulic | 1 | |
| 703A95-0523-00 | HOSE, DRAINAGE, HYDRAULIC TANK | 1 | |
| 703A95-0523-01 | DRAIN HOSE HYDRAULIC TANK [AS365 - EC155] | 1 | |
| 703A95050002 | HYDRAULIC TANK DRAINAGE PIPE | 1 | |
| 703A95052300 | HOSE,DRAINAGE,HYDRAULIC TANK | 1 | |
| 7215B | HYDRAULIC JACK (TAIL) | 2 | |
| 7235A | The Model 7235A Fixed Height Tripod Jack is a 35 ton capacity, two stage hydraulic jack designed pri | 4 | |
| 795D1100 | JACK - TRIPOD - AFT FUSELAGE - 15 TON CAPACITY - 44" MINIMUM HT., 54" HYDRAULIC LIFT, 13" SCREW EXTENSION, 111" TOTAL HT. | 1 | |
| 856A1084 | ACTUATOR, PORTABLE HYDRAULIC, HAND OPERATED | 7 | |
| 856A1084G01 | ACTUATOR - PORTABLE HYDRAULIC | 7 | |
| 856A1084G02 | ACTUATOR PORTABLE HYDRAULIC HAND OPERATED SET | 17 | |
| 856A1084G03 | ACTUATOR - PORTABLE HYDRAULIC | 7 | |
| 856A1084G04 | ACTUATOR PORTABLE HYDRAULIC | 28 | |
| 856A2375 | PULLER, HYDRAULIC-REAR ROTATING AIR/OIL SEAL | 1 | |
| 856A2375G01 | PULLER, HYDRAULIC - REAR ROTATING AIR/OIL SEAL (PULLER) | 1 | |
| 856A2386G01 | PULLER, HYDRAULIC - LPT FORWARD ROTATING AIR SEAL (PULLER) | 1 | |
| 856A3062 | PULLER, HYDRAULIC - REAR ROTATING AIR/OIL | 1 | |
| 856A3062 G02 | Puller Hydraulic ‐ Rear Rotating Air/Oil Sleeve | 6 | |
| 856A3062G01 | PULLER, HYDRAULIC - REAR ROTATING AIR/OIL SLEEVE (PULLER) | 1 | |
| 856A3062G02 | Puller, Hydraulic - Rear Rotating Air/Oil Sleeve (puller) | 6 | |
| 856A3062G03 | HYDRAULIC - REAR ROTATING AIR/OIL SLEEVE (PULLER) | 1 | |
| 8662-010 | STAND - ACCESS - LOWER LOBE - HYDRAULIC OPERATION WITH STABILIZING JACKS - HEIGHT: 3 - 12.5 FEET | 1 | |
| 87RM233-2011 | UNIVERSAL HYDRAULIC STAND | 1 | |
| 88043-100 | HYDRAULIC TEST STAND | 1 | |
| 8C3634 | PUSHER - HYDRAULIC - IGBX - HORIZONTAL | 1 | |
| 8C3635 | ADAPTER - GUIDE - PUSHER HYDRAULIC - IGBX - HORIZONTAL | 1 | |
| 920746-1-1 | HYDRAULIC COMPONENT TEST STAND | 1 | |
| 9461M39P02 | ACTUATOR PORTABLE HYDRAULIC | 2 | |
| 9461M39P02-0001 | HYDRAULIC, PORTABLE GAUGE (GAGE) | 1 | |
| 9465 M11 G00 | PUMP, HAND-HYDRAULIC PORTABLE (PORTABLE PUMP) | 1 | |
| 9465M11 | PUMP - HAND - HYDRAULIC PORTABLE | 1 | |
| 9465M11P01 | PUMP, HAND-HYDRAULIC PORTABLE | 2 | |
| 9471M46 | ACTUATOR - PORTABLE HYDRAULIC | 1 | |
| 9471M46G01 | Actuator-Portable Hydraulic | 2 | |
| 956A1700 | FIXTURE - STAND HYDRAULIC SEATING - HPT ROTOR | 1 | |
| 95P10AR | MALABAR AXLE JACK TWO STAGE HYDRAULIC AVIATION FLOATING | 4 | |
| 968.85.81.214 | JACK, HYDRAULIC (TAIL JACKING POINT) | 1 | |
| 9780-0190 | PORTABLE HYDRAULIC CART, SYSTEM TEST, CAPABLE OF 3000 PSI AND A MINIMUM FLOW OF 50 GPM. | 1 | |
| 9780-0237 | PORTABLE HYDRAULIC TEST STAND | 1 | |
| 9780-0295 | PORTABLE HYDRAULIC TEST STAND | 1 | |
| 9780-0308 | TEST STAND - HYDRAULIC, 30 GPM AT 3000 PSI | 1 | |
| 9780-0327 | PORTABLE HYDRAULIC CART, SYSTEM TEST, CAPABLE OF 3000 PSI AND AMINIMUM FLOW OF 50 GPM.(COM-1796) | 1 | |
| 9780-0362 | PORTABLE HYDRAULIC CART, 3000PSI, 30GPM | 1 | |
| 9780-0398 | PORTABLE HYDRAULIC CART, SYSTEM TEST, CAPABLE OF 3000 PSI AND AMINIMUM FLOW OF 50 GPM.(COM-1796) | 1 | |
| 97A2910 2035 000 | CONNECTOR PRESSURIZING HYDRAULIC TANK | 21 | |
| 97A2910 2062 000 | CONNECTOR DE-PRESSURIZING HYDRAULIC TANK | 29 | |
| 97A29102035000 | CONNECTOR-PRESSURIZING,HYDRAULIC TANK | 21 | |
| 97A29102035001 | HYDRAULIC TANK | 1 | |
| 97A29102062000 | HYDRAULIC TANK DEPRESSURISE CONNECTOR | 29 | |
| 97A29102094000 | EQUIPMENT HYDRAULIC TANK FILLING | 2 | |
| 97L32101011000 | Hydraulic recovery tank | 1 | |
| 98A12003000000 | UNIT TOPPING UP HYDRAULIC TANK PORTABLE | 1 | |
| 98A29001010000 | ADAPTER-HYDRAULIC TANK TOPPING UP UNIT | 1 | |
| 98A29102035000 | CONNECTOR-PRESSURIZING,HYDRAULIC TANK | 1 | |
| 98D29003501000 | CONNECTOR-PRESSURIZING,HYDRAULIC TANK | 22 | |
| 98D29003501003 | HYDRAULIC SYSTEM INFLATABLE COMPONENTS | 17 | |
| 98F12303002000 | PORTABLE HYDRAULIC PUMP | 2 | |
| 98L29003004000 | TOOL DRAIN HYDRAULIC TANK | 3 | |
| 98L29003006000 | TOOL REMOVAL INSTALLATION-HYDRAULIC TANK | 1 | |
| 990188 | TEST STAND HYDRAULIC COMPONENTS | 1 | |
| 99A29001006000 | UNIT-TOPPING UP,HYDRAULIC TANK(HAND OPERATED) | 2 | |
| 99A29102035000 | CONNECTOR-PRESSURIZING,HYDRAULIC TANK | 1 | |
| 9C1256 | HAND PUMP - HYDRAULIC PORTABLE (VSVS) | 1 | |
| 9C1256G01 | HAND PUMP - HYDRAULIC, PORTABLE | 1 | |
| 9C2243G01 | Hydraulic puller stage 6 | 1 | |
| 9C2244G01 | Hydraulic puller stage 2-5 | 1 | |
| 9C6003P01 | FIXTURE, SHIPPING - FAN STATOR CASE MODULE HYDRAULIC ROTATION | 1 | |
| A206-500 | GUN,HYDRAULIC INSTALL TOOLS (HUCK) | 1 | |
| A292683 | CRANKSHAFT DEFLECTION GAUGE TOOL NO. A292683 SET OF TWO HYDRAULIC JACKS FOR PRELOADING THE CONNECTING ROD STUDS ON VEE ENGINES. MUST BE USED WITH A292539 HYDRAULIC PUMP KIT. (6-1/4 IN. TALL) | 1 | |
| A292704 | CONNECTING ROD HYDRAULIC JACKS (VEE ENGINES) TOOL NO. A292704 (SET OF 2) SET OF TWO HYDRAULIC JACKS FOR PRELOADING THE CONNECTING ROD STUDS ON INLINE ENGINES. MUST BE USED WITH A292539 HYDRAULIC PUMP KIT. (4 IN. TALL) | 1 | |
| A32066-1 | CONTAINER - HYDRAULIC FLUID RESISTANT, 5 GALLON | 14 | |
| A330-92024-0003 | BOOM R/I HYDRAULIC PLATFORM (ELEVATING ADJUSTABLE PLATFORM) | 1 | |
| A50310 | FUNCTION PLOTTER HYDRAULIC TEST STAND | 1 | |
| AA72 | Meyer Hydraulic AA72 Extension Inner Slide Tube (51 to 72) for ATS Tail Stand | 1 | |
| AE99144G | Hydraulic Coupling (Hose Attaching) | 6 | |
| ALS80120- A | ADJUSTABLE HEIGHT LADDER (SHOP AIR POWERED HYDRAULIC PUMP) | 1 | |
| ALS80120-M | ADJUSTABLE HEIGHT LADDER (MANUAL HYDRAULIC PUMP) | 1 | |
| ARB-00816 | Bearing race installation tool (hydraulic press) | 1 | |
| AS5231J10 | PLUG - HYDRAULIC PRESSURE TUBE, 5/8 INCH LINE, CORROSION RESISTANT STEEL | 1 | |
| AT05431-2 | HYDRAULIC AMPLIFIER TEST STAND | 1 | |
| AT50029 | HYDRAULIC TEST STAND | 1 | |
| ATI520H | HYDRAULIC SWAGER-PORTABLE | 4 | |
| ATI520HK | HYDRAULIC SWAGER KIT-PORTABLE | 4 | |
| ATR42V000A | ATR 42&72 DIGITAL AIR/HYDRAULIC TOOL KIT (SKYDROL) | 3 | |
| ATR42V100A | ATR 42&72 DIGITAL AIR/HYDRAULIC TOOL KIT (Standard MILH5606) | 5 | |
| ATS | MEYER HYDRAULICS ATS Tail Stand | 2 | |
| B777-300-CRDKIT | CRADLE SUPPORT B777 KIT LCL TOOLS KIT (CONTAIN 4 CRADLE) INCLUDE HYDRAULIC JACK AJDUSTER NOT INCLUDE LOAD CELL | 1 | |
| BACP20AU10J | PLUG - HYDRAULIC PRESSURE TUBE, 5/8 INCH LINE, CORROSION RESISTANT STEEL | 1 | |
| BACP20AU8J | PLUG - HYDRAULIC RETURN TUBE, 1/2 INCH LINE, CORROSION RESISTANT STEEL | 3 | |
| BBHO-30 | BIG BRUTE HYDRAULIC OFFSET (BBHO) PULLER - TANG MANDREL ATTACHMENT OR, | 1 | |
| BBHO-30A | BIG BRUTE HYDRAULIC OFFSET (BBHO) PULLER - THREADED MANDREL ATTACHMENT | 1 | |
| BG2500 | INSTALLATION TOOL,FASTENER,HYDRAULIC | 4 | |
| BMS5-63 | SEALENT-FIREWALL-HYDRAULIC FLUID RESISTANT | 1 | |
| C29003-1 | Seal Installation Equipment - Hydraulic Swivel Assembly | 8 | |
| C29003-8 | SEAL INSTALLATION EQUIPMENT - HYDRAULIC SWIVEL ASSEMBLY | 3 | |
| C29005-1 | Adapter - Tee, Standby Hydraulic System Test | 6 | |
| CG420-2S | PUMP, HYDRAULIC, TWO STAGE (50 TONS) | 1 | |
| CJ67C0261 | RAM, HYDRAULIC, THIRD STAGE ALT: CJ67C0261-03 RAM, HYDRAULIC, THIRD STAGE | 1 | |
| CJMD112-001 | PORTABLE HYDRAULIC SERVICE UNIT | 1 | |
| CJMD112-001-110V | PORTABLE HYDRAULIC SERVICE UNIT | 2 | |
| CJMD112-002 | HAND PUMP -- PORTABLE -HYDRAULIC SERVICE | 3 | |
| CJMD812-002 | HYDRAULIC GROUND POWER UNIT, PORTABLE | 1 | |
| COM-163 | PORTABLE HYDRAULIC CART 3000 PSI, 30 GPM | 1 | |
| COM-8859 | PORTABLE HYDRAULIC CART | 1 | |
| CTE5100 | PUMP HYDRAULIC PORTABLE | 2 | |
| D-5A | HYDRAULIC TEST STAND | 1 | |
| D01068-002 | OW HYDRAULIC LIFT D01068-002+ 16A CEE, STANDARD 30 M; COLOR RAL 6018 YELLOW-GREEN, HYDRO | 1 | |
| D02016-002 | WING HYDRAULIC LIFT D02016-002 + 16A CEE, STANDARD 30 M: RAL 6018 YELLOW-GREEN, HYDRO | 1 | |
| D046-072 | HYDRAULIC TEST STAND | 1 | |
| D046-075 | HYDRAULIC TEST STAND | 1 | |
| D046-080 | HYDRAULIC STATIC FLOW TEST STAND | 1 | |
| D046-081 | HYDRAULIC AMPLIFIER TEST STAND | 1 | |
| D07TRJ00007G01 | TRIPOD JACK-HYDRAULIC 737/A320 TAIL | 1 | |
| DAT06AETA5005 | DEUTSCH LITE HEAD ASSEMBLY DAT06AETA5005 SIZE #5, 5/16″ INCH IS FOR SWAGING STAINLESS STEEL HYDRAULIC FITTINGS. | 1 | |
| DAT08AEFKT5003 | REPAIR KIT, HYDRAULIC TUBING (TEMP. REPAIRS, OPERATING PRESSURES UP TO AND INCLUDING 3000 PSI) (APPROVED FOR TITANIUM) | 4 | |
| DHM403 | FLOW TESTER / FOR HYDRAULIC INSTALLATIONS / PORTABLE / BI-DIRECTIONAL DHM403 | 1 | |
| DHM404 | FLOW TESTER / FOR HYDRAULIC INSTALLATIONS / PORTABLE / BI-DIRECTIONAL DHM403 | 1 | |
| DHS1650B | O-RING HYDRAULIC PUMP INSTALLATION | 5 | |
| DLTFRPSKT3027 | KIT HYDRAULIC REPAIR BY DESIGNED METAL CONNECTION | 9 | |
| DMC1000-625 | .062" Hydraulic Adjustable Tension Safe-T-Cable® Application Tool Kit | 2 | |
| DYA44-TS-SS-34P34-SKY | HYDRAULIC TEST STAND | 1 | |
| EMH1569ZS38550 | MOBILE HYDRAULIC TEST STA | 1 | |
| F21864200 | SELF-CONTAINED TEST BENCH (HYDRAULIC POWER UNIT). | 1 | |
| F71421-501 | END PLAY CHECK, STAB TRIM ACTUATOR HYDRAULIC FIXTURE | 7 | |
| F80049-12 | HYDRAULIC STANDBY SYS. PRESS./SHUTOFF VALVE 2ea | 9 | |
| F80049-2 | HYDRAULIC STANDBY SYS. PRESS./SHUTOFF VALVE | 6 | |
| F80049-56 | HYDRAULIC STANDBY SYS. PRESS./SHUTOFF VALVE 2EA | 17 | |
| F80135-10 | CABLE - HYDRAULIC LEAKAGE CHECK (FOR STANDBY SYSTEM PUMP) | 4 | |
| FB97A0001 | CONNECTOR-PRESSURIZING,HYDRAULIC TANK | 1 | |
| G500-145R | HYDRAULIC CRANE - REMOVAL/INSTALLATION, LANDING GEAR | 1 | |
| G500-145RN | HYDRAULIC CRANE - RE-MOVAL/INSTALLATION, LANDING GEAR | 3 | |
| G700-072002-1 | Hydraulic Scissor Lift Table Low Profile | 2 | |
| G700-072002−1 | HYDRAULIC SCISSOR LIFT TABLE LOW PROFILE | 2 | |
| G700?072002?1 | HYDRAULIC SCISSOR LIFT TABLE LOW PROFILE | 2 | |
| G700−072002−1 | HYDRAULIC SCISSOR LIFT TABLE LOW PROFILE | 2 | |
| G85D-S | RIVET GUN-RIVETER PNEUMATIC-HYDRAULIC SPLIT LOCKBOLT INSTALLATION TOOL | 5 | |
| GB941-010-500 | HYDRAULIC SYSTEM TEST STAND M3 | 1 | |
| GHTSB-202*-100L-22KW-65LPM-207 | PORTABLE HYDRAULIC TEST RIG | 1 | |
| GMR3942 | Hydraulic Test Stand - A400M | 1 | |
| GMR569 | UNIT-REPLENISHING HYDRAULIC TANK AND SYSTEMS | 1 | |
| GP-10S | HYDRAULIC FORCE AND PRESSURE 4 " FACE DIA, 1/2 NPTF, BTM CONN, SS, GLYCRN FILLED GAUGE, 10,000 PSI, 700 BAR ENERPAC CATALOG | 4 | |
| GS1221 | HYDRAULIC PROPELLER TEST STAND (0-600 PSI) | 1 | |
| GS1221-M5 | PROPELLER TEST STAND, HYDRAULIC | 1 | |
| GS1221M1 | PROPELLER TEST STAND, HYDRAULIC | 1 | |
| GS1221M15 | PROPELLER TEST STAND, HYDRAULIC | 1 | |
| GS1221M18 | TEST STAND HYDRAULIC | 1 | |
| GSB1210007 | SERVICING UNIT-2 QT. PORTABLE HYDRAULIC SKYDROL (0-3000 PSI) | 1 | |
| GSB1210010 | HYDRAULIC SERVICING UNIT − PORTABLE, LANDING GEAR | 1 | |
| GSE069 | HYDRAULIC TEST STAND | 1 | |
| GSE2900149 | HYDRAULIC TEST STAND | 1 | |
| GSE59168 | MLG PTA HYDRAULIC AND NITROGEN SERVICE KIT | 1 | |
| H104D33355 | HYDRAULIC TEST STAND ENGINE DRIVEN | 1 | |
| H250T1-5000-2 | HYDRAULIC TANK ASSEMBLY | 1 | |
| HGPU50-30-1SX | PORTABLE HYDRAULIC CART, SYSTEM TEST, CAPABLE OF 3000 PSI AND A MINIMUM FLOW OF 50 GPM. | 1 | |
| HGPU60-50-1S | PORTABLE HYDRAULIC CART | 1 | |
| HIP-D-9SS | PORTABLE HYDRAULIC TEST STAND - MODEL HIP-D-9SS | 1 | |
| HIP-E-10SS-2Z-HPU | TEST STAND, HYDRAULIC, PORTABLE ELECTRIC DRIVEN | 1 | |
| HIP-E-30HP-15-CAS | PORTABLE HYDRAULIC TEST STAND | 1 | |
| HIP-E-9SS | PORTABLE HYDRAULIC CART,SYSTEMS TEST | 1 | |
| HIP-E-9SS-RAT | PORTABLE HYDRAULIC TEST STAND FOR AIRBUS A-330/A-320/EJET 190/195 | 1 | |
| HIPE9SS | PORTABLE HYDRAULIC CART,SYSTEMS TEST | 1 | |
| HIX 3007-0G | STAND-HYDRAULIC ACTUATOR ROD | 2 | |
| HIX-3007-0G | STAND-HYDRAULIC ACTUATOR ROD | 2 | |
| HIX3007 | STAND-HYDRAULIC ACTUATOR ROD | 12 | |
| HIX3007 REV A | EXTENSION/RETRACTION STAND- HYDRAULIC ACTUATOR ROD | 1 | |
| HIX3007-0G | STAND - HYDRAULIC ACTUATOR ROD | 2 | |
| HPM-20 | HYDRAULIC PRESS: FOR FORMING AND SHAPING METAL UNDER PRESSURE. | 1 | |
| HPPE303K-S4 | TEST STAND - HYDRAULIC, PORTABLE ELECTRIC DRIVEN, 30 GPM, 3000 PSI. WHEN ORDERING, SUPPLY THE LOCAL ELECTRICAL, HOSE L (AMERICAN LAB & SYSTEMS) | 1 | |
| HPPE503K-S4 | PORTABLE HYDRAULIC CART, SYSTEM TEST, CAPABLE OF 3000 PSI AND AMINIMUM FLOW OF 50 GPM.(COM-1796) | 1 | |
| HSP1733 | TESTER - PORTABLE HYDRAULIC PROPELLER | 1 | |
| HT2000 | MOBILE HYDRAULIC TEST STAND (HYCOM) | 1 | |
| HT2000-1-E/1-S | PORTABLE HYDRAULIC CART 3000 PSI, 30 GPM | 3 | |
| HT2000-1-E/1-S-X350 | PORTABLE HYDRAULIC CART, SYSTEM TEST | 5 | |
| HT2000-1-E/1-S-Z | PORTABLE HYDRAULIC CART, SYSTEM TEST, CAPABLE OF 3000 PSI AND A MINIMUM FLOW OF 30 GPM | 1 | |
| HT2000-1-E/1-S2 | TEST STAND, HYDRAULIC | 3 | |
| HT2000-1-E/1-S2-X350-Z | TEST STAND - HYDRAULIC | 1 | |
| HT2000-1-F-D | PORTABLE HYDRAULIC CART, SYSTEM TEST, CAPABLE OF 3000 PSI AND A MINIMUM FLOW OF 30 GPM | 1 | |
| HT2000-1-F-D, PH50E | CART - PORTABLE HYDRAULIC, SYSTEMS TEST, CAPABLE OF 3000 PSI | 1 | |
| HT2000-1-F-S | PORTABLE HYDRAULIC CART, SYSTEMS TEST, CAPABLE OF 3000 PSI AND A MINIMUM FLOW OF 30 GPM. | 2 | |
| HT2000-1-F-S-T4-Z | PORTABLE HYDRAULIC CART, SYSTEMS TEST, CAPABLE OF 3000 PSI AND A MINIMUM FLOW OF 30 GPM. | 1 | |
| HT2000-1-F-S-X350 | HYDRAULIC TEST STAND | 1 | |
| HT2000-1-F-S-Z | PORTABLE HYDRAULIC CART, SYSTEMS TEST, CAPABLE OF 3000 PSI AND A MINIMUM FLOW OF 30 GPM | 1 | |
| HT2000-1-F-S2 | DUAL PORTABLE HYDRAULIC CART, SYSTEMS TEST | 4 | |
| HT2000-1-F-S2-T4-Z | PORTABLE HYDRAULIC CART ( 3000 PSI, 30 GPM ) | 1 | |
| HT2000-1E-1-S2-Z-X350 | PORTABLE HYDRAULIC CART | 1 | |
| HT2000-1E/1-S2 | TEST STAND - HYDRAULIC, 30 GPM AT 3000 PSI | 3 | |
| HT2000-1E1S | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 55 kW | 3 | |
| HT2000-1E1S2 | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 55 kW | 3 | |
| HT2000-1E1S2X350 | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 110 kW | 2 | |
| HT2000-1E1SX350 | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 10 m Hose, 380/420 V, 250 A | 5 | |
| HT2000-1FS | PORTABLE HYDRAULIC CART ( 3000 PSI, 30 GPM ) | 2 | |
| HT2000-1FS2 | PORTABLE HYDRAULIC CART ( 3000 PSI, 30 GPM ) | 4 | |
| HT2000-1FS2X350 | PORTABLE HYDRAULIC CART, SYSTEMS TEST, CAPABLE OF 3000 PSI AND A MINIMUM FLOW OF 30 GPM. | 1 | |
| HT2000-2-E/1-S-X350 | PORTABLE HYDRAULIC CART, SYSTEM TEST, 5000 PSI | 1 | |
| HT2000-2-E/1-S2-X350-Z | MOBILE HYDRAULIC TEST STAND FOR AIRCRAFT MAINTENANCE ( DIESEL ) | 1 | |
| HT2000-E/1-S-X25 | TEST STAND - HYDRAULIC, 30 GPM AT 3000 PSI | 1 | |
| HT2000E1S | PORTABLE HYDRAULIC CART, SYSTEMS TEST, CAPABLE OF 3000 PSI AND A MINIMUM FLOW OF 30 GPM. | 3 | |
| HT50-E-F-D | PORTABLE HYDRAULIC CART, SYSTEM TEST, CAPABLE OF 3000 PSI AND AMINIMUM FLOW OF 50 GPM.(COM-1796) | 1 | |
| HTC12E1S | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 6 m Hose, 380/420 V, 22 A | 2 | |
| HTC12E1S2 | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTC12E1S2H | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTC12E1S2HT | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTC12E1S2T | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTC12E1SH | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTC12E1SHT | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 6 m Hose, 380/420 V, 22 A | 2 | |
| HTC12E1ST | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTC30E1S | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 9 m Hose, 380/420 V, 105 A | 2 | |
| HTC30E1S2 | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 37 kW | 2 | |
| HTC30E1S2H | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 37 kW | 2 | |
| HTC30E1SH | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 37 kW | 2 | |
| HTC3E1S | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTC3E1S2 | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTC3E1S2H | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTC3E1S2HT | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTC3E1S2T | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTC3E1SH | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTC3E1SHT | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTC3E1ST | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTC6E1S | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTC6E1S2 | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTC6E1S2H | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTC6E1S2HT | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTC6E1S2T | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTC6E1SH | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTC6E1SHT | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 6 m Hose, 380/420 V, 16 A | 2 | |
| HTC6E1ST | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 6 m Hose, 380/420 V, 16 A | 2 | |
| HTC8E1S | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 6 m Hose, 380/420 V, 22 A | 2 | |
| HTC8E1S2 | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTC8E1S2H | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTC8E1S2HT | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTC8E1S2T | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTC8E1SH | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 6 m Hose, 380/420 V, 22 A | 2 | |
| HTC8E1SHT | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 6 m Hose, 380/420 V, 22 A | 2 | |
| HTC8E1ST | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 6 m Hose, 380/420 V, 22 A | 2 | |
| HTM12E1S | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTM12E1S2 | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTM12E1S2H | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTM12E1S2HT | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTM12E1S2T | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTM12E1SH | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 6 m Hose, 380/420 V, 22 A | 2 | |
| HTM12E1SHT | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTM12E1ST | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTM30E1S | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 9 m Hose, 380/420 V, 105 A | 2 | |
| HTM30E1S2 | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 37 kW | 2 | |
| HTM30E1S2H | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 37 kW | 2 | |
| HTM30E1SH | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 37 kW | 2 | |
| HTM3E1S | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTM3E1S2 | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTM3E1S2H | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTM3E1S2HT | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTM3E1S2T | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTM3E1SH | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 6 m Hose, 380/420 V, 16 A | 2 | |
| HTM3E1SHT | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 6 m Hose, 380/420 V, 16 A | 2 | |
| HTM3E1ST | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTM6E1S | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 6 m Hose, 380/420 V, 16 A | 2 | |
| HTM6E1S2 | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTM6E1S2H | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTM6E1S2HT | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTM6E1S2T | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTM6E1SH | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 6 m Hose, 380/420 V, 16 A | 2 | |
| HTM6E1SHT | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTM6E1ST | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 11 kW | 2 | |
| HTM8E1S | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 6 m Hose, 380/420 V, 22 A | 2 | |
| HTM8E1S2 | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTM8E1S2H | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTM8E1S2HT | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTM8E1S2T | HYCOM Dual Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTM8E1SH | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 3 ph, 15 kW | 2 | |
| HTM8E1SHT | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 6 m Hose, 380/420 V, 22 A | 2 | |
| HTM8E1ST | HYCOM Single Output Electric Driven Mobile Hydraulic Test Stand System, 6 m Hose, 380/420 V, 22 A | 2 | |
| HTPC-P100-E/1-S | TEST STAND - HYDRAULIC, 30 GPM AT 3000 PSI | 1 | |
| HTT-02 | SCISSOR LIFT TABLE HYDRAULIC EQUIPMENT | 3 | |
| HTT-02-90-3036 | SCISSOR LIFT TABLE HYDRAULIC EQUIPMENT | 1 | |
| HTXC-P140-E/1-5-Z | PORTABLE HYDRAULIC CART, SYSTEM TEST, CAPABLE OF 3000 PSI AND A MINIMUM FLOW OF 30 GPM | 1 | |
| HW93718 | HYDRAULIC TRANSMISSION LIFT FOR IDG REMOVAL & INSTALLATION | 14 | |
| HYCOM HT 2000-1-E/1-S | PORTABLE HYDRAULIC CART, 3000 PSI, 30 GPM | 1 | |
| IAE1F10007 | PULLER, REMOVAL - ENGINE ASSY, ROTATING RING, STARTER / fuel & hydraulic pump SHAFT, GEARBOX | 12 | |
| IAE1P16047 | ADAPTER HYDRAULIC ENGINE ASSY HPT REMOVE INSTALL | 4 | |
| J-POD10SX02 | HYDRAULIC TRIPOD JACK FOR B737/TAIL | 1 | |
| J20009-109 | Hydraulic Jack Stand | 11 | |
| J29006-1 | BLEEDER HOSE, BRAKE CONTAINER - HYDRAULIC FLUID RESISTANT, 1 GALLON (3.8 LITER) WRENCH - TORQUE | 9 | |
| J32060-1 | CONTAINER - HYDRAULIC FLUID RESISTANT, 5 GALLON | 26 | |
| J32096-1 | BLEEDER HOSE, BRAKE CONTAINER - HYDRAULIC FLUID RESISTANT, 1 GALLON (3.8 LITER) WRENCH - TORQUE | 8 | |
| JACK3SST | Jack Hydraulic 3 -Stage NLG | 1 | |
| JACK3ST | Jack Hydraulic 3 -Stage | 1 | |
| JEHA | HYDRAULIC TEST STAND | 1 | |
| K-4388 | HYDRAULIC FLUID CONTAMINATION MONITOR IN-LINE SENSOR | 4 | |
| K12003-1 | FILL TOOL – HYDRAULIC STRUT, SEMI LEVER GEAR STANDARD PRACTICES – AIRFRAME | 4 | |
| K27010-104 | REMOVE/INSTALL EQUIPMENT - HIGH LIFT HYDRAULIC CONTROL UNIT (CE) | 4 | |
| K27010-99 | REMOVE/INSTALL EQUIPMENT - HIGH LIFT HYDRAULIC CONTROL UNIT (CE) | 3 | |
| KHC-1011-M | HYDRAULIC COUPLING KIT W/METAL DUST PLUG REPLACEMENT | 3 | |
| KS2600 | STAND: TEST,HYDRAULIC, | 1 | |
| KS2600K11 | TEST STAND, HYDRAULIC, PROPELLER | 1 | |
| KW0501845 | HYDRAULIC HAND STACKER 2T X 1.5 M | 1 | |
| LPA20PSTA30 | HYDRAULIC PORTABLE PARTICLE COUNTER | 2 | |
| ME-1500 | TIJERA HYDRAULIC TABLE CAR 1500KG 1020X610MM | 1 | |
| ME1500 | TIJERA HYDRAULIC TABLE CAR 1500KG 1020X610MM | 1 | |
| MIL-T-7612D | TEST STAND, HYDRAULIC SYSTEM | 1 | |
| MJ-2A | HYDRAULIC SYSTEM TEST STAND | 1 | |
| MODEL S-765A | TEST STAND, AIRCRAFT HYDRAULIC SYSTEM | 1 | |
| MODEL-S-765 A | HYDRAULIC TEST STAND | 1 | |
| MT528-1 | C184 BEARING REMOVAL AND INSTALLATION TOOLS (FOR USE WITH HYDRAULIC PRESS) | 2 | |
| MW485-01 | Moore & Wright MW485-01 Magnetic Hydraulic Indicator Stand | 1 | |
| Model #2019 | Hydraulic Test Stand (Hydraulic and leak testing procedures 10 GPM minimum) | 1 | |
| P39 | ULTIMA STEEL HYDRAULIC HAND PUMP, S STANDARD PUMP | 8 | |
| PH30E | TEST STAND - HYDRAULIC, 30 GPM AT 3000 PSI | 1 | |
| PH50D | PORTABLE HYDRAULIC CART, SYSTEM TEST, CAPABLE OF 3000 PSI AND AMINIMUM FLOW OF 50 GPM.(COM-1796) | 1 | |
| PH50E | PORTABLE HYDRAULIC CART, SYSTEMS TEST, CAPABLE OF 3000 PSI AND A MINIMUM FLOW OF 30 GPM. | 1 | |
| PT-100-MIL-5 | USATCO Air Hydraulic Blind Rivet Installation Tool Kit (Case dimensions: 9-1/4" x 6-1/2" x 2-1/2") (Add to cart: Contact us to order) | 1 | |
| PTM1016 | HYDRAULIC MANUAL STACKER | 1 | |
| PWA 49030 | PUMP HYDRAULIC PORTABLE | 1 | |
| PWA104744 | JACK, HYDRAULIC - VFG, EDP, FUEL PUMP, STARTER | 3 | |
| PWA106340 | JACK, HYDRAULIC - VFG, EDP, FUEL PUMP, STARTER | 1 | |
| PWA25006 | PULLER-SEAL RETAINER GEARBOX HYDRAULIC DRIVES | 2 | |
| PWA25070 | BASE HYDRAULIC DRIVE CARBON SEAL RETAINER | 2 | |
| PWA4098 | WRENCH NUMBER ONE BEARING RETAINING NUT HYDRAULIC | 1 | |
| PWA49030 | PUMP HYDRAULIC PORTABLE | 1 | |
| PWA85204 | Puller, Knocker - Engine Assy, Main Gearbox, RR Hydraulic Pump Drive Seal Retainer" | 4 | |
| PWA86302 | HYDRAULIC, TRIM BALANCE COUNTERWEIGHT, 6TH STAGE TURBINE | 1 | |
| PWC54600 | HYDRAULIC CYLINDER STAND | 1 | |
| PWC89837 | CYLINDER HYDRAULIC CONTAINMENT | 5 | |
| R2069 | KIT HYDRAULIC TUBING REPAIR FLOTA CAO | 1 | |
| RBT400209-D4 | Drive and Sump Assembly Hydraulic Pump & Tachometer Drive Quil Backlash Tool | 1 | |
| RCH302 | ENERPAC RCH302 HYDRAULIC CYLINDER 30TAN | 1 | |
| SCA-1284.00 | HYDRAULIC TRIPODS JACK TAIL | 1 | |
| SCTH625 | .062" Hydraulic Adjustable Tension Safe-T-Cable® Application Tool with 5" Nose | 2 | |
| SE29-1102 | WRENCH -0 HYDRAULIC PUMP TO ENGINE ATTACH TOOL | 1 | |
| SLS-500-PL | TRUCK - LAVATORY SERVICE - CAPACITY 550 GALLON WASTE - 300 GALLON WATER/CHARGE - STATIONARY PLATFORM ON TANK - HYDRAULIC LIFT OPTIONAL - HOSE WITH REEL & COUPLING - MOUNTED ON A TWO TON TRUCK | 1 | |
| SPL-14835 | ACTUATOR - PORTABLE HYDRAULIC, VSV | 1 | |
| SPS-3518 | TRUCK MOUNTED STAIRS - ADJUSTABLE HEIGHT BETWEEN 96" AND 228" - HYDRAULICALLY OPERATED & CONTROLLED FROM THE DRIVERS SEAT | 2 | |
| STD-1110 | CONTAINER - HYDRAULIC FLUID RESISTANT, 5 GALLON (19 LITERS) | 1 | |
| STDTOOL-304 | BLEEDING CONTAINER 5 L ( HYDRAULIC) | 1 | |
| SUT290004 | SP-29-002 DEVICE FOR TAKING SAMPLES OF HYDRAULIC FLUID AND REFILLING THE HYDRAULIC SYSTEM USING A HAND REFILL PUMP | 1 | |
| T-4000-5K-S4 | TEST STAND - HYDRAULIC | 1 | |
| T14579 | HYDRAULIC LIFTING TABLE | 1 | |
| T14579 | HYDRAULIC LIFTING TABLE | 1 | |
| TJC | MEYER HYDRAULICS TJC Heavy-Duty Portable Floor Crane | 2 | |
| TK-2368/939 | CONTROL BOX HYDRAULIC SYSTEM COMPONENTS TEST STAND | 1 | |
| TM1609G001 | HYDRAULIC MEASUREMENT DIGITAL DISPLAY | 5 | |
| TMH 3000 | Hydraulic Test Stand | 1 | |
| TMH 5000 | Hydraulic Test Stand | 1 | |
| TMH 5500 | Hydraulic Test Stand | 1 | |
| TMH GA24-00-00 | HYDRAULIC TANK | 1 | |
| TMH3000S40550 | HYDRAULIC TEST STAND | 3 | |
| TMH5000 | HYDRAULIC TEST STAND | 1 | |
| TMH5000S40555 | HYDRAULIC TEST STAND | 1 | |
| TMH5000S40555B | PORTABLE HYDRAULIC CART, SYSTEM TEST, 5000 PSI | 1 | |
| TMH5000S40555G | PORTABLE HYDRAULIC CART, SYSTEM TEST, 5000 PSI | 2 | |
| TMH5500 | HYDRAULIC TEST STAND | 1 | |
| TMH5500S40555G | HYDRAULIC TEST STAND | 1 | |
| WESCO 272971 | HYDRAULIC LIFT TABLE | 1 | |
| XX6504730 | HYDRAULIC CONTAMINATION KIT | 5 | |
| 97A29102094000 | TANK FILLING EQUIPMENT,HYDRAULIC,USED TO | 2 | |
| PWA49030 | PUMP HYDRAULIC PORTABLE | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
